SAIL

Holding Action

My dissatisfaction with the head and holding tank plumbing arrangement on our 1987 Sabre 38 had grown as we cruised the boat away from the comforts of a marina for longer periods of time. When we are tied up at a marina, the use of regular bathrooms generally trumps the onboard system, and one can get rather complacent. Once untethered, though, the dynamic quickly changes. There is only one option inside the three-mile limit, and that’s to use the holding tank.

We inherited a fairly typical setup, with one glaring exception. For reasons unknown to me, the previous owner had converted the original 34 gal holding tank into a water tank. Before your mind gets too wrapped up in that thought, I should point out that he bought the boat brand-new and had never pumped waste into it. To compensate, he plumbed in a modest

You’re reading a preview, subscribe to read more.

More from Sail

Sail2 min read
Sailing Scene
ARE YOU OUT THERE SAILING, CRUISING AND LIVING THE SAILING LIFE? Share your experiences with other readers. Send your photos to sailmail@sailmagazine.com And don’t forget to sign up for our free eNewsletter, Under Sail, at sailmagazine.com/newsletter
Sail2 min read
Cruising Tips
In these days of electronic routes, the obvious option is to steer for the shortest distance between two points. In heavy seas, however, particularly if they are on the beam, sticking slavishly to this doctrine can be uncomfortable or worse. Put simp
Sail4 min read
An Undefinable Something
The year is 1966, in the heart of Orange County, California, when White Seal is laid up in fiberglass, by hand, at the Jansen Marine Yacht Yard. Fresh off the production line at the height of a booming marine industry, the boat’s gelcoat and varnish

Related