Australian Model Railway Magazine

The Impossible Layout

The idea of attempting an interpretation of at least a portion of Darling Harbour (circa 1950) within an envelope of only 4.4m x 450mm might easily be described as ‘impossible’, even absurd… especially as I model in O scale!

Being fascinated by the complexity of Darling Harbour and the opportunity that it would provide to model an urban environment was one thing, but would this be a step too far? How could such an enormous location be modelled with any reasonable chance of success?

The Darling Harbour branch was

You’re reading a preview, subscribe to read more.

More from Australian Model Railway Magazine

Australian Model Railway Magazine3 min read
Diary
For all activities contact Eastern Division representative Graham Windmill on 9626 0351. 13 April Running Session at the home of Tim Stewart, 1 Narambi Close, Berowra Heights. HO NSW layout based on Mudgee in operation. DCC layout. 2pm -5pm. 4-5 May
Australian Model Railway Magazine5 min read
Mailbag
I have been building some Bluebird railcar kits that I bought about seven years ago, which had been languishing on the shelf while the layout was being constructed. When I had almost finished the first one, I blithely sprayed the whole railcar with c
Australian Model Railway Magazine9 min read
Putting The O In Casterton Part 9: Point Modifications And Electrics
Despite all the careful planning, somewhere, in the back of my mind, I had a nagging feeling that a costly mistake was going to occur at some stage. So far, I’d built up about 30 turnouts, which is about a third of what will be required. They are all

Related