TAKING THE STRAIN
It was soon after the Second World War that ropes made from synthetic materials such as polyester and nylon, and then later polypropylene, first became available. They had massive advantages over their natural fibre predecessors, which were prone to rot and not very strong, but to achieve high strength and low stretch – in halyards, for instance, and even sheets on larger boats – it was still necessary to use
(stainless) steel wire. It wasn’t until the 1980s when Kevlar was first used in rope construction that there were any further developments in terms of materials. Since then a bewildering range of additional high-tech materials have appeared, including Dyneema, Vectran, Technora, Cordura, Zyex and Zylon, which have allowed rope manufacturers to produce increasing numbers of different products. Pure polyester ropes are still available and can adequately perform a general purpose role in different running rigging applications, particularly on cruising boats and club racing boats, but the more serious racers have plenty of opportunities to use different products which have been developed for specific applications. Amongst the more important considerations when selecting a particular type of rope are its intended application – sheet, halyard, kicker, runner and so on – and also to what extent it will need to integrate with deck and rig fittings such as winches, jammers
You’re reading a preview, subscribe to read more.
Start your free 30 days