Documente Academic
Documente Profesional
Documente Cultură
Types
Standards Rated insulation voltage Ui according to IEC 947-5-1 according to UL/CSA Rated operational voltage Ue Conventional thermal current Ith Rated operational current Ie in AC-15 acc. to IEC 947-5-1 24 to 127 V 220 to 240 V 380 to 440 V 500 to 690 V 24 V 48 V 72 V 125 V 250 V V V ~V A A A A A A A A A A 690 600 24 to 690 16 6 4 3 2 6 2.8 1 0.55 0.3 M 3.5 (+,-) pozidriv 2 screw with cable clamp 1 to 4 0.75 to 2.5 0.75 to 2.5 cycles 10 million, A9 - A75; 3 million, A95 & A110; 3600 See curve below 1200 10 x Ie AC-15 10 x Ie AC-15 1s 0.1 s A A 17 V / 5 mA, A9 - A75; 24V / 50 mA, A95 & A110 A W 10 0.15 IP 20 100 140
Ac
ro co ss nt the ac to line rs
CAL18-11 CAL18-11B
690 690
Connecting terminals
(delivered in open position. Screws of unused terminals should be tightened).
Connecting capacity Rigid solid Flexible with cable end Mechanical durability
5 million, A/AF95 - A/AF185; 3 million, A/AF210 - AF750; 0.5 million, AF1350 & AF1650
Max. switching frequency Electrical durability Max. switching frequency Rated making capacity Rated breaking capacity Rated short-time withstand current Icw q = 40C Min. switching capacity Short-circuit protection - gG (gl) fuses Power loss per pole at 6 A Degree of protection according to IEC 529, IEC 144, DIN 40 050 and NFC 20-010
cycles/h cycles/h
24V / 50 mA
CAL18
Million ops.
CA5, CAL5
30
30 20 10
A/AF210...AF750
3 2 1
AF1350/AF1650
0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10
Million ops
A/AF95...A/AF185 5
0.1 0.02
0.05
0.1
0.2 0.3
0.5
4 5 6
10
Electrical durability AC-15 according to IEC 947-5-1 making current: 10 x Ie where cos = 0.7 and Ue breaking current: Ie where cos = 0.4 and Ue The curves opposite show the electrical durability of the auxiliary contact blocks according to breaking current Ic. These curves have been plotted for resistive and inductive loads up to 690 V, 40 to 60 Hz. Low Voltage Products & Systems
ABB Inc. 888-385-1221 www.abb-control.com
1.19
AC 1000 - 11/03