Sunteți pe pagina 1din 2

Tribal Existance Productions Worldwide

On Site Laser Safety Check List

Class IV Check List: Start-up, Procedures:


* 1. Check / inspect - projector mechanical aperture shutters are in place * 2. Check / inspect - that projector & laser safety labels are visible and in place * 3. Make sure / inspect - the staging area is clear of personnel. * 4. Assure / inspect - that beam blocks and shutter are in the OFF position * 4. Turn on - Laser power breaker, key switch or Module. * 5. Test beam - is terminated in projector (Beam Block Test) * 6. Recheck / inspect - there are no personnel in staging area * 7. Send out aiming beam at lowest power with laser controller (AT ALL TIMES) * 8. Verify that all beams are terminated at assigned targets * 9. Verify there are no aerial beams (Exception NTAM LOD Government Approval) * 10. Check / inspect for back reflections (Beam Splatter) * 11. Make Sure / inspect - All remote targets are properly terminated & secure

See laser operating instructions to run show

TEPW Operator(s) / Safety Officer(s) _____________________ _______ _

Date(s) / Time(s) _____________

___

Venue / Location(s) _______________________________________________

S-ar putea să vă placă și