Documente Academic
Documente Profesional
Documente Cultură
www.huawei.com
Page 2
1.4 Type in IP Address then click on OK ALWAYS USE THE FOLLOWING: IP Address: 129.9.0.99 Subnet mask: 255.255.0.0 (No need to filed-up the Default gateway and DNS)
Page 3
2. Open the U2000 Web LCT application (pre-installed) 3. Type in your user name and password to Login
Page 4
Page 5
4.2 Click on SEARCH Note: Domain is automatically set (no need to input
Page 6
Page 7
4.6 After pressing OK, all available NE will be added on the screen (Communication Status will be NORMAL)
Page 8
Page 9
Page 10
6. To configure the NE, check if the Login Status then click on NE Explorer
Status will be already Logged in 6.1 Highlight the NE you want to configure
Page 11
7. Web LCT will automatically detect the available board/card on the Slot Layout (with color ) 8. To install the cards, right click on the board then pressed ADD
Note: PIU, FAN and CSH card will automatically running installed. Also slot 23 and 25 for ODU will not detect until you finished add the IFU2 boards.
Page 12
8.3 Right click the ODU board then click the add physical board
8.2 After you add all the physical boards, slot 23 and 25 for ODU board will appear.
Page 13
9.3 Double click box under NAME and type SITE NAME. Then click apply and query. 9.2 Highlight NE attributes
Page 14
9.4 Click Modify NE ID and a dialog box will appear. 9.5 Type Site ID based on plan assigned by TNP. Then click OK NOTE: ID is a unique number.
Page 15
Page 16
Working Mode : HSB Revertive Mode : Revertive WTR : 300 Enable Reverse Switching : Disable Working Board : 3-IFU2-1 Protection Board : 5-IFU2-1
10.5 Click ok
Page 17
Page 18
11.4 Double Click the box of IF Channel Band and change the band according to the plan
11.5 Double Click the box of Manually Specified Module and change the module according to the plan
11.6 Double Click the box of E1 Capacity and change the capacity according to the plan
Page 19
12.3 Double click the box of transmit frequency and type the frequency according to link budget given by TNP 12.2 Highlight ODU interface
Page 20
12.6 Double click the box of transmit power and type the power according to link budget given by TNP
Page 21
Page 22
Page 23
Thank You
www.huawei.com
Page 24