Documente Academic
Documente Profesional
Documente Cultură
NAME: CUSTOMER #:
QUICK INDEX
Spruce, Balsa, Plywood, Glues
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
877-477-7823 800-861-3192
ORDER DESK HOURS (PST)
Mon. - Fri.: 5:00am - 6:00pm, Sat.: 7:00am3:30pm
WOOD PRODUCTS (WP) Pg. 43-49 METALS & PLASTICS (ME) Pg. 50-58
4130 Steel, Aluminum, Tubing, Sheet, Rod, Bar, Angle, Hinge, Copper Tubing, Firewall Metals, Trailing Edge, Channel, Plastics, Plexiglas, Lexan, Nylon, Phenolic & Acrylic Tube Rod
800-826-3160
Rubber Goods, Grommets, Hose O-Rings, Shock Mounts, Shock Cords, Channels, Control System Components, Fuel Supplies, Bearings, Tie Rods, Throttles & Controls, Propellers, Spinners, Cowlings, Windshields, Seat Belts & Harnesses
225 Airport Circle, Corona, CA 92880-2527 Phone: (951) 372-9555 Fax: (951) 372-0555 CUSTOMER SERVICE HOURS (Pacific Time)
Mon. thru Fri.: 5:00am4:00pm Saturday: 7:00am3:30pm EASTERN REGIONAL DISTRIBUTION CENTER
Magnetos, Carburetors, Starters, Generators, Alternators, Spark Plugs, Ignition Harnesses, Engines, Exhaust Stacks, Engine Mounts, Air & Oil Filters
452 Dividend Drive, Peachtree City, GA 30269 Ph: (770) 487-2310 Fax: (770) 487-2308 CUSTOMER SERVICE HOURS (Eastern Time)
Mon. thru Fri.: 8:00am7:00pm Saturday: 10:00am6:30pm
Fabric, Tapes, Inspection Rings, Grommets, Paint Brushes, Dopes, Thinners, Finishes, Chemical Products, Registration Stencils, Placards, Decals
Vacuum Pumps, Pitot Tubes, Shock Mounts, Instrument Overhaul, Tachometer Cables
Custom Panels, Radios, Antennas, ELTS, Encoders, GPS, Headsets, Intercoms, Accessories
Tubing Benders & Cutters, Rivet Guns, Wire Twisters, Spray Guns, Welding Equipment, Spark Plug Tools, Safety Equipment
Oxygen Equipment, Tiedown Kits, Goggles, Sun Glasses, Videos, Charts, Flight Cases, Tow Bars, Parachutes.
Construction & Aviation Videos, Instructional Materials, Pilot Guides, Log Books, Aircraft Manuals, General Aviation Books, E-Books
COPYRIGHT 2012 AIRCRAFT SPRUCE & SPECIALTY COMPANY USE OF ANY MATERIAL DISPLAYED HEREIN IS PROHIBITED WITHOUT WRITTEN PERMISSION
ON THE COVER:
Photo Courtesy of EAA
A COMPANY HISTORY
201 West Truslow Ave, Fullerton CA. Home of Aircraft Spruce from 1973 to 1997
Present Home of Aircraft Spruce West (225 Airport Circle, Corona, CA.)
Present Home of Aircraft Spruce East (452 Dividend Drive, Peachtree City, GA)
Aircraft Spruce West was located in a 27,000 split level packing house in downtown Fullerton, CA. from 1973 until 1997. Built in 1924 by the Union Pacific Railroad, the Building was known as the Elephant Packing House named after the original lease holder operating a citrus packing operation there. In 1996, Aircraft Spruce acquired a 5 acre parcel near the airport in Corona, CA. Construction for the new home of Aircraft Spruce West began in March 1997. In September of 1997, the new 62,000 sq. ft. facility was completed and operations were moved from Fullerton to Corona. The Corona facility features 10,000 sq.ft. of office space, a large, automated warehouse, separate workshops for preparation of metal and wood orders, and a huge retail store for fly-in and drive-in customers. Visitors are always welcome at Aircraft Spruce West. Phone: (951) 372-9555 email: info@aircraftspruce.com
Aircraft Spruce East is located on Falcon Field (FCC) in Peachtree City, GA. 20 miles southwest of Atlanta. Aircraft Spruce East was formally located in a 27,000 sq.foot building in Griffin, GA which was the former home of Alexander Aeroplane Co., prior to the acquisition by Aircraft Spruce in January 1996. The new facility in Peachtree City is 56,000 sq. ft. and became the new home of Aircraft Spruce East in March of 2004. Aircraft Spruce East ships hundreds of orders each day to customers worldwide and features a fully stocked aircraft parts and pilot supply store. Be sure to visit Aircraft Spruce East any time you are in the Atlanta area.
Aircraft Spruce Canada is located at the Brantford Municipal Airport in Brantford, Ontario, about an hour drive south from Toronto. A retail store is available to customers who fly or drive to the Brantford Airport to purchase aircraft parts, avionics, and pilot supplies. Aircraft Spruce Canada also provides same day shipping to customers throughout Canada from our 12,000 square foot facility. Aircraft builders and owners in Canada have full access to products sold by Aircraft Spruce in the United States at competitive prices and shipping rates. Shipping options include Canada Post, UPS, FedEx, DHL, Dicom, and Purolator. Make plans to visit Aircraft Spruce Canada anytime you are in the Greater Toronto Area. Phone: (519) 759-5017 email: info@aircraftspruce.ca
Aircraft Spruce Avionics opened in September 1993 as a full service avionics installation and repair facility at Fullerton Airport. In 1995 Aircraft Spruce Avionics moved to Chino Airport and operated there through December 2003, at which time it merged with Advantage Avionics, also located at Chino Airport. Advantage Avionics is now the avionics installation and repair facility of Aircraft Spruce, and is an authorized factory dealer for Honeywell, Garmin, Magellan, Icom, S-Tec, Century, Chelton, and many other leading avionics manufacturers. For information on your avionics requirements and for installation of avionics in your aircraft, call the avionics specialists at Aircraft Spruce at (800) 826-3160. KCNO Chino Phone: (909) 606-0220 email: fly@AdvantageAvionics.com
Aircraft Spruce & Specialty Co. serves our customers worldwide through International Representatives in over 55 countries. These countries include: Argentina, Australia, Austria, Belgium, Bolivia, Brazil, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Estonia, Finland, France, Germany, Guatemala, Hungary, India, Ireland, Israel, Italy, Japan, Korea, Lithuania, Luxembourg, Madagascar, Malaysia, Mexico, Netherlands, New Zealand, Norway, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Romania, Russia, Serbia, Singapore, Slovak Republic, South Africa, Spain, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Turkey, Ukraine, United Kingdom, Uruguay, Venezuela. For complete contact information for any of our Aircraft Spruce International Representatives, please call 1-877-4-SPRUCE or visit our website at www.aircraftspruce.com
JIM IRWIN
President
NANCI IRWIN
Vice President
TOM MARRACCI
Director of Operations - West
DON ARRINGTON
Director of Operations - East
MIKE IRWIN
Purchasing Manager
JEFF IRWIN
Operations Manager
ROB IRWIN
Brand Development Manager
DESIREE CZAPLINSKI
Marketing Manager
MIKE NORBY
Intl. Sales Manager
TOM GLAZE
Sales ManagerWest
CAROLYN LEON
Customer Service Manager
DEBBIE MOSS
Accounting Manager
CHUCK JONES
Warehouse ManagerWest
TIM KREIDER
Store Manager - East
TAMMY SHORT
Warehouse ManagerEast
RYAN DECK
Avionics Sales Manager
JOSH SOLIS
Product Support Manager
SCOTT ADAMS
General ManagerCanada
FRIENDLY, FAST, & EFFICIENT ORDER PROCESSING...... THATS THE AIRCRAFT SPRUCE WAY!
At Aircraft Spruce & Specialty Company, we handle every order with the same care and diligence that we did our first order back in 1965. Here is a glimpse of some of the many departments that process thousands of orders each week and ship them to our customers around the world.
Orders may be placed by mail, FAX, email, and online at www.aircraftspruce.com, or as most customers prefer, by phone with one of our friendly, helpful sales persons. Your order is quickly input into our computer system and printed immediately in the warehouse.
Our large staff of order pickers receive the orders in the warehouse, fill the order and pass it along to the shipping department for careful packaging and shipment. We carry over 60,000 different inventory items!
Warehouse inventory is carefully arranged in computer part number sequence for fast and accurate order completion. As your single source supplier, Aircraft Spruce stocks lumber, plywood, metals, composites, hardware, instruments, tools, covering supplies, avionics....and everything in between! Walk-in customers are invited to visit our stores located at our warehouses in Corona, CA and Peachtree City, GA, and Brantford Canada.
Orders for specially cut steel and aluminum tubing, sheet, bar and plate are no problem here, and are processed on a daily basis. Aircraft Spruce furnishes raw materials to large end users in huge quantities at volume discounts, as well as cut pieces as small as one foot to homebuilders. Whatever you need, weve got it!
Hand selected aircraft grade spruce lumber was our very first product, and remains one of our specialty products today. All of our spruce is certified to MIL-S-6073 and is custom milled, inspected and packaged according to customer specifications.
An average of 2000 packages per day leave the Aircraft Spruce warehouses in Corona, CA, Peachtree City, GA, and Brantford ON, Canada via UPS, Parcel Post, Federal Express, air freight or sea freight on their way to our customers throughout the United States and worldwide. Our state-of-the-art in-house computer systems with complete order tracking capability make Aircraft Spruce & Specialty Company the smart choice as your complete supplier for aviation materials and components.
Aircraft Spruce is a Preferred Partner of EAA. As a Preferred Partner, Aircraft Spruce provides discounts on orders placed by EAA members using the new EAA credit card. The discount varies on every product, and there are certain products on which discounts are not permitted by the manufacturer. The maximum discount is 10%, and the price with discount applied can be provided by the Aircraft Spruce sales agent or online. When you use the EAA Platinum Visa credit card at Aircraft Spruce, our computer system recognizes the card and automatically applies applicable discounts to each product.
Aircraft Spruce & Specialty has been selected to participate in AOPA is new credit card program. AOPA, working closely with Bank of America, has developed a unique WorldPoints rewards program, which rewards one point for every net retail dollar spent with the card and doubles the points when used for purchases at one of the five participating aviation retailers, along with over 4,000 FBOs and select AOPA products and services. Cardholders will receive two points for every net retail dollar spent at Aircraft Spruce, and they also further the cause of this countrys most effective general aviation organization. Were pleased to have been asked to participate in this exciting new program and we look forward much interaction with the AOPA membership.
ORDERING INFORMATION
We want all aviators to have access to the wide range of products and services offered by Aircraft Spruce. Just give us a call on our toll free order line, send us a request for a catalog by fax, mail, or e-mail, and well have a complimentary copy of our catalog on the way to you the same day. Our catalog is also available on CD, or for download in pdf format at www.aircraftspruce.com. If you know of someone who needs a catalog, please let us know. Free worldwide shipping! Print Catalog...................................... P/N 01-38400 ...................... FREE CD Catalog ........................................ P/N 01-00612 ...................... FREE Stop by one of our stores to view and purchase the many items listed in the Aircraft Spruce catalog. The Aircraft Spruce West store is open Monday thru Friday 8:00am to 6:00pm, and Saturday 7:00am to 3:00pm. The Will Call store at Aircraft Spruce East is open Monday thru Friday 8:00am to 6:00pm, and Saturday 8:00am to 4:00pm. The Aircraft Spruce Canada store is open Monday thru Friday 9:00am to 5:00pm, Saturday 9:00am to 3:00pm. Call either office ahead of time to place your order and we will have it ready for pick-up upon your arrival. The staff at Aircraft Spruce West, East, and Canada welcome your visits. Aircraft Spruce Online provides customers with up to the minute account and order status utilizing their own personal computers. The Aircraft Spruce Web Site provides information on many of the products contained in this catalog, real time access to account information, open order status and filled order history available daily. Confirm order on line in real time as they are processed, and view backorder status and product availability. In addition, our partnership with UPS provides you with up to the minute shipping information including package status, scheduling, and delivery exception.
For our customers convenience we enclose a copy of the invoice covering the order with each order shipped except those shipped to a third party. If the order is paid by check and the check did not cover the full amount of the invoice, the amount of underpayment will be sent C.O.D. for the balance due plus C.O.D. fee of $10.50 rather than delay the order. If you have overpaid by check, the overpayment will be credited to your account or refunded. C.O.D. shipments are considered paid as soon as we receive payment from UPS, and credit card orders are paid automatically at time of shipment. We look forward to your next order!
Upon receipt, the package should be opened promptly and material checked against the packing slip enclosed. Items out-of-stock at time of shipment will be marked as back-ordered to follow. These items will not be charged on the invoice enclosed with the package and will be forwarded as soon as delivery is received from our suppliers. The backordered items will not be charged until shipped. About 90% of the items featured in our catalog are carried in stock. Special items of hardware, bearings, unusual fittings and slow moving items are special ordered as required. However, even with the large inventory we carry, it is not uncommon to come up short on some items. If an item is missing and not marked backordered, please advise us immediately by mail or call our Customer Service Dept. Backorder are shipped from the warehouse (WEST OR EAST) that receives stock first. Although we make every effort to ship all orders complete, it is often necessary to backorder one or more items if we are out of stock. When the partial order is shipped and invoiced, you are not charged for the backordered item(s) until these items are shipped. You are billed only for what is shipped. A backorder is created and shipped as soon as the items arrive. The backorder is then invoiced and any overpayment from the first invoice is applied to it. If you do not wish to have any items backordered, or wish to cancel an existing backorder, just let us know. We will do so immediately if the backorder has not been shipped. We are working continuously to keep all items in stock to preclude backorders. If a backorder is necessary, we do appreciate your patience. Aircraft Spruce pays the shipping costs within the 48 contiguous United States by surface shipping on backorders when the backordered items could have been shipped via UPS inside the first package at no additional freight cost. Except when the backordered items are oversize, hazardous, contain one gallon or larger, or COD shipments. We will continue to strive to maintain stock of all our products to keep the necessity for backordering parts to a minimum. Merchandise may be returned for credit or refund within 30 days from date of purchase if received in resalable conditionpacked in original manufacturers box, complete with instructions and all components (if applicable). A copy of the original order showing purchase or information stating the invoice number and date of purchase, with reason for return must accompany the article. Do not mail purchase information in letter form under separate cover. Do not return any products C.O.D. as it cannot be accepted by our warehouse. All returns must be made to Aircraft Spruce West in Corona, CA. Certain items may not be eligible for return (e.g. books, videos, DVDs software, special order items, cut materials, etc). Call first for a return authorization number and instructions to retun the product. Call Aircraft Spruce EAST or WEST customer service for a RMA Number Before Returning any Product Open and examine all packages promptly. Notify the Aircraft Spruce Customer Service Department of any discrepancies in the order. If the merchandise is received in damaged condition or the carrier fails to deliver the entire shipment as shown on the Bill of Lading covering motor freight delivery, make note of the damage or shortage on the Bill of Lading and ask the driver to sign it. Then call the terminal office of the carrier and institute a claim for the loss or damage. If a package delivered by UPS arrives damaged, report this to the driver immediately. UPS will issue a report on the damage to Aircraft Spruce at which time a replacement shipment can be made.
BACKORDERS
SPRUCE ONLINE
Your satisfaction is our number one priority. This is why we include a Customer Comment Card in every order we ship. Please take a moment to complete the few questions on the card and give us any comments or suggestions you might have. Simply drop the postage paid card in the mail to return to our California headquarters. Your response helps us monitor our level of service and ensure that we are performing well for you. Orders placed by 4:00 pm EST and 4:00 pm PST Monday-Friday for off-the-shelf, in-stock items are normally shipped same day from the respective location (Peachtree City, GA or Corona, CA). Although we stock the vast majority of the items in our catalog, we cannot assure that they will all be on hand at all times. We ship every order as quickly as possible, and in the event of a delay, be assured that we are working hard to get your order shipped promptly. Due to order volume during holidays, we cannot guarantee that all orders placed can ship on the day after the holiday closure. Orders for spruce, tubing and other special cut products may take a few days to ship depending on order volume. Special order products ship base on the lead times of each manufacturer. Note: Special Instructions may delay shipment of your order.
RETURNED MERCHANDISE
SHIPPING TIME
DAMAGE OR SHORTAGE
The packing peanuts that we use to fill product boxes for protection during shipping are 100% biodegradable, clean and hygienic, non-static, odorless, recyclable and non-polluting. They are a starch mixture made from potato or wheat and are water soluble; just dispose of them in the sink with water, hose them away, put in a garbage disposal, or flushed down a drain or toilet. They do not pollute groundwater. This material is the best we have found as an economical way to insure maximum protection of the contents of our shipping boxes.
Aircraft Spruce works hard to bring you the lowest prices on every product we carry. If you have found a better price for an item at another authorized dealer, we will do everything possible to beat that price. Our Lowest Price Guaranteed is only applicable to identical conditions of sale. The item must be in stock at the other authorized dealer (not a floor sample, open box item, refurbished or demo piece). This offer applies to new purchases only.
ORDERING INFORMATION
Aircraft Spruce has long served many companies, schools and government agencies on an open account basis. Established companies can apply for an open account by submitting a credit application including all company data and at least three business references and bank information. Credit application forms available on request. Open account terms are net 15 days after invoice date.
OPEN ACCOUNTS
We have offered discounts to our regular dealers and FBOs for many years for resale purposes, and we welcome the addition of new dealers to best serve aviation consumers worldwide. Due to the very competitive and low margin nature of most of the prices shown in this catalog, all discounts are based on volume purchasing. Discounts for many items are shown below the product in the catalog. Discounts for items with discounts not shown in the catalog or for larger quantities than those listed can be quoted by mail, phone, or FAX upon request. You can be assured, as an aviation dealer, that you will receive the best possible net prices from Aircraft Spruce on all product lines that we carry. If you ever find a lower current advertised price on any product, just let us know and well beat it. Call for an Aircraft Spruce dealer application if interested in becoming a dealer for our covering supplies, hardware, or Microflight products.
DEALER/OEM DISCOUNTS
For all products, call our main sales lines at 877-4-SPRUCE. Our sales representatives will consult with other staff members or call the manufacturer of the product to get you the answer you need as quickly as possible. We are here to help!
PRODUCT INFORMATION
Over the years, one of the services that our company offers that seems to be most appreciated by our customers is our willingness to research and provide quotations for special items. Other supply firms tend to discourage special requests due to the time and effort it takes to find these items, and request that customers order catalog items only. We have always taken a different approach and welcome requests for noncatalog items. Call or write and provide as much information as possible including make, model, serial number of aircraft and exact part number or product you need, plus your credit card number. Within 24 hours if at all possible, we will advise you of the price and delivery time on the item, at which time you can place your order if acceptable. Once an order is placed for a special order item, it cannot be cancelled or returned and must be paid in advance. If we cannot drop ship your special order, then freight charges from the factory to our warehouse will be added to your invoice. Our goal is to provide you with everything you need - if you do not find it in this catalog, let us know and well find it for you!
SPECIAL ORDERS
Aircraft Spruce is recognized as the leading source of materials for aircraft builders, owners and pilots around the world. Over the past 45 years we have developed a family of customers in every part of the globe. Our International order dept. is more than happy to assist you in placing and processing your order for international shipment. Please note the following guidelines for placing an international order. You may place your order with any of our international representatives or directly with our USA, Corona facility. Correspondence should be sent in English or Spanish to expedite service. Requests for quotation are processed within 72 hours, unless additional research is required on a product. All prices quoted and invoiced by Aircraft Spruce West are FOB Corona, CA and by Aircraft Spruce East are FOB, Peachtree City, GA. A quotation is processed as a proforma invoice for all overseas customers. A proforma invoice is not considered an order until funds are received to process the order. Actual freight charges may differ from a freight quote or estimate provided by a freight carrier. First time orders are preferably received by fax or e-mail to insure correct notation of name and billing and shipping information. Please note the information on 8130 forms in the following paragraphs. If 8130 forms are required, we must be notified at the time the order is placed so that we may special order the documentation. To economize on the shipping costs, International orders are generally shipped complete unless otherwise advised by the customer. We utilize DHL, UPS, Fed-Ex and Air Parcel Post for most international shipments. Shipments by DHL, UPS and Fed-Ex are highly recommended because of the excellent traceability of the shipments. Parcel post traces are very time consuming and unreliable. We cannot be responsible for shipments made by Parcel Post. Our international dept. also utilizes the services of many other air and sea carriers. Should the services of a freight forwarder be necessary we can work with one who is familiar with our service or with one of your choice to meet all of your shipment requirements. All freight, duty and customs charges are the responsibility of the customer.
INTERNATIONAL CUSTOMERS
In cooperation with the manufacturers we represent, Aircraft Spruce & Specialty Co. warrants for a period of one year (on most products) from the date of original purchase its products to be free from defects in material and workmanship. Aircraft Spruce & Specialty Co.s obligation under this warranty is limited to repair or replacement of the purchased product only, and under no circumstances shall Aircraft Spruce & Specialty Co. be liable for any loss, damage, injury, cost of repair or consequential damages of any kind in connection with the sale, use or repair of any product purchased from Aircraft Spruce & Specialty Co. Products sold are subject to manufacturers warranty policy. Defective merchandise or out of box failure of product is repaired or replaced at manufacturers option. Avionics, electrical, instruments, or similar products that are defective are subject to manufacturers warranty only, and will not be replaced immediately from Aircraft Spruce inventory.
PRODUCT WARRANTY
Inasmuch as Aircraft Spruce & Specialty Co. has no opportunity to supervise the manufacture, installation or maintenance of the parts supplied by it, nor any opportunity to participate in the design or manufacture of the various certificated and homebuilt aircraft in which its parts are utilized, the purchaser by placing an order and accepting said merchandise from Aircraft Spruce & Specialty Co. agrees that all materials purchased will be used solely at purchasers risk and that purchaser will indemnify and hold Aircraft Spruce & Specialty Co., its owners and employees, free and harmless from all loss, liability or damage resulting from claims brought by any reason of any alleged failure or defect of any part or parts supplied by Aircraft Spruce & Specialty Co.
Aircraft Spruce provides you with its own Certificate of Conformance for our products at no charge. This is noted on every invoice. Factory certification and test reports are available on some items and Form 8130 are available on FAA approved products. A cost of $100 per product is charged to secure these forms. Please inquire at time of order if test reports are available for the items you are ordering. If available, the forms must be requested at time of order and the product must be special-ordered from the factory with the forms. These forms cannot be furnished after you receive the product. Anticipate shipping delays if Form 8130 is requested. Do not order products using catalog part number if you require form 8130, as you will receive standard parts without the form. Simply describe the part and specifically request Form 8130. Due to delays and costs involved in furnishing these forms, we strongly suggest that you check to see if the Aircraft Spruce Certificate of Conformance will be acceptable in lieu of Form 8130. Do you want to give an aircraft builder or pilot a gift from Aircraft Spruce for a birthday, holiday, or another special occasion and dont know what to get? Let them decide. Give one of our sales representatives a call at (877) 4-SPRUCE and order an Aircraft Spruce Gift Card for any dollar amount you want. The cards are valid indefinitely and can be used toward the purchase of any products sold by Aircraft Spruce. These cards are very popular and are a gift that is sure to please any aviator. Available in any denomination. If selecting USPS First Class Mail, well ship any gift card only order prepaid within the United States. Gift Cards are valid at all Aircraft Spruce locations.
SHIPPING INFORMATION
Unless otherwise specified, all shipments will be made by UPS (size and weight permitting). Weights & Limits - Maximum weight per package for shipment to any destination served by UPS is 150 lbs. with no other weight restrictions applicable. If a shipment exceeds 80 lbs. a motor freight shipment is usually more economical. A UPS C.O.D. fee of $10.50 is charged for each C.O.D. parcel. Ground shipments larger than 1728 cubic inches and all air shipments will rate at the greater of actual or dimensional weight. Maximum Size per Package - 130 in length and girth combined (once down and once around the parcel). Packages over 130 length & girth or over 108 long are rated at a minimum 90 lbs and assessed an additional charge of $50. Packages over 60 long are subject to an additional $8.00 handling fee. Charges subject to change by UPS and FedEx. Territory Served - Regular UPS service (surface) available to all 48 states, parts of Hawaii and Alaska, and Canada. All points in Hawaii, Alaska, and Canada are served by UPS Next Day Air or 2nd Day Air. Flammable and corrosive material restricted. There is a $3.00 additional rate charge for residential shipments to rural zip codes. UPS Surface serves some points in Alaska, Hawaii, and Canadian Provinces of Alberta, British Columbia, Manitoba, Ontario, Quebec & Saskatchewan. Insurance - Each parcel carries $100.00 insurance against loss or damage. Additional insurance coverage added as required per parcel. Maximum insurance allowable - $10,000 per package. A street address with zip code is required. C.O.D. shipments acceptable with money order or certified funds on first order. United Parcel Service will leave a parcel without signature if so authorized by the shipper. Orders of significant value will require a signature at time of delivery. If purchaser is willing to accept responsibility for delivery, ask that the instructions OK to leave without signature be added to the shipping label. However, these instructions will release Aircraft Spruce of liability for loss or damage. Delivery Time - One to seven days depending on the zone and destination zipcode. Shipment Of Hazardous Materials - Shipment of items such as dopes, primers, and many other liquid products require extensive, precise documentation and specially constructed cartons that comply with DOT regulations. Each flammable or hazardous product must be packed in a separate package and cannot be shipped with non-hazardous materials. In many cases, motor freight shipments may be more economical for multiple package orders of hazardous materials due to the fees charged by UPS. A hazardous shipping charge of $27.50 will be added to UPS Ground shipments, $37.50 will be added to Air Shipments. Some hazardous items in small volume can ship ORMD and the hazardous shipping charge will not apply. Hazardous items shipped overseas require special handling and must ship by freight service. Call for details and current pricing.
Method Zone 2 UPS Red $29.75 UPS Next Day Air Saver $26.45 UPS Blue PM $14.50 Fed Ex Priority Overnight $30.40 Fed Ex Standard Overnight $26.20 Fed Ex Econo 2nd Day $17.70 USPS Priority Mail $9.31 UPS Ground $9.80 Zone 4 $69.15 $63.20 $21.35 $68.60 $60.95 $21.60 $10.32 $14.71 Zone 6 $80.75 $76.65 $43.00 $84.75 $73.90 $42.55 $11.45 $22.48 Zone 8 $87.60 $80.90 $48.15 $89.50 $78.05 $47.65 $13.73 $29.57
2 3 4
4 3 2
From Corona, CA
- Rates for comparison purposes only. Based on 10lb. package shipped to each listed zone. - Rates do not include insurance, oversize, hazardous, COD etc. Subject to change without notice.
Weight and Limits are the same as outlined for UPS Surface delivery to all areas served. See above for more details on shipment of flammables and other hazardous items. Delivery Time - Three days (3rd Day Air) and two days from California (2nd Day Air) or next day (via Next Day Air). Areas Served - Shaded states on map above, with limited service to some as noted.
In addition to UPS, we also provide delivery via Federal Express Priority, Economy, and Ground service. Federal Express charges are competitive with UPS and the same weight, size, and hazardous limits will apply. Hazardous materials shipping by Fedex Express Air service are subject to a $100 dangerous goods charge. As an added advantage, Federal Express does offer Saturday delivery, and almost all deliveries are made before noon. Federal Express Home Delivery is a residential ground service with deliveries Tuesday through Saturday.
FEDERAL EXPRESS
Aircraft Spruce receives special shipping rates from DHL for international shipments, and these savings are passed along to our customers overseas. Specify DHL for the most economical and fastest shipment of your small package orders shipped overseas.
The charge for motor freight delivery is based on the commodity being transported, the weight of the shipment and the distance it will travel. The rate for a shipment of steel tubing, for instance, may be $5.00 Cwt. as compared to $15.00 Cwt. for foam. The steel tubing is a heavy commodity taking up a small space whereas the foam is very light but the volume is large and takes considerable space in the trailer. The rates reflect these factors in addition to the susceptibility to damage of the shipment. All truck shipments are insured for full value. It is good practice to include a phone number on the order which can be shown on the Bill of Lading. This enables the carrier personnel to advise of the arrival of the shipment and arrangements can be made for delivery. No C.O.D shipments for truck delivery. Consignee must inspect shipment on arrival and note any shortages or damage on freight bill to file claim for loss. Any claims for lost or damaged merchandise will be denied if the customer receives the shipment free and clear.
MOTOR FREIGHT
Priority Mail parcels may not exceed 70 lbs. or 108 in length and girth combined. We will utilize a Priority Mail Flat Rate Box if your items will fit in the box and the postage will cost less. Packages less than 13 ounces may ship First Class Mail. Maximum allowable insurance via Post is $400 per package. No shipments made without adequate insurance coverage. Packages destined for overseas will ship the cheaper of First Class or Priority Mail and must not exceed 44 lbs. (with exception to certain countries) or 72 inches in length and girth combined and must not be longer than 42. No hazardous materials or C.O.D. orders may be shipped by Post. Please provide adequate time for delivery. Claims for lost or damaged packages must be made within 60 days of shipment.
US POSTAL SERVICE
What are my shipping options? From Canada (Brantford warehouse): Canada Post, UPS Canada, FedEx Canada, Purolator, or Can Par. Hazardous materials can only be shipped Purolator. From the U.S. (California or Georgia warehouse): Mail (USPS to border/delivery by Canada Post), *Customer will pay duties and taxes directly to Canada Post *For delivery duty paid via Canada Post, order must ship from Canada, UPS, FedEx. *Customer will choose their own broker for customs clearance.
CANADA
10
Cozy Mark IV Plans with Newsletters on CD ..P/N 01-00178 .. $500.00 Cozy Mark IV Info Pac .....................................P/N 01-00566 .... $16.95 Cozy M Drawings* .........................................P/N 01-00570 .... $49.95 Cozy Newsletters on CD ..................................P/N 01-00569 .... $20.00 Cozy Owners Manual* .....................................P/N 01-00565 ...... $6.25 Cozy Mark IV DVD Award Winning ...............P/N 01-00982 .... $14.95 * Can only be sold to a builder, must provide plans # to order.
This high quality model of the Cozy MKIV looks great in any office or home. P/N 13-11321 .................. $150.00
SECTION 1 KITS
Part #
SECTION II KITS
Part # Price
Foam Kit ........................................................ 01-01410 ...........$2,653.18 Fiberglass Kit................................................. 01-01415 ...........$2,953.35 Wood Kit ........................................................ 01-01420 ..............$159.01 Hardware Kit.................................................. 01-01430 ..............$236.06 Metal Kit ........................................................ 01-01425 ..............$263.18 Misc. Mats ..................................................... 01-01440 ...........$4,223.13 Tools Kit ........................................................ 01-01435 ..............$498.10 Fuel Fittings ................................................... 01-01431 ................$71.00 Epoxy Kit ....................................................... 01-38201 ..............$461.95
Bolts............................................................01-01505 ..................$36.80 Screws ........................................................01-01510 ..................$33.50 Washers .....................................................01-01515 ..................$21.49 Nuts ............................................................01-01520 ..................$85.43 Nutplates ....................................................01-01525 ..................$48.20 Rivets..........................................................01-01540 ..................$31.03 Fittings ........................................................01-01535 ................$131.82 Foam ..........................................................01-00297 ................$405.60 Expoxy ........................................................01-01545 ................$315.95 Metal ...........................................................01-01530 ................$183.65 Misc ............................................................01-01560 .............$1,866.62 Fiberglass ...................................................01-00298 ................$372.00
CHAPTER KITS
Part #
Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter
Price
Part #
Price
4 Fuselage Bulkhead....................... 01-00256 ..............$525.00 Chapter 15 Firewall Accessories................01-00272 .................$227.63 5 Fuselage Sides............................. 01-00257 ..............$379.49 Chapter 16 Control System ........................01-00273 .................$486.91 6 Fuselage Assy .............................. 01-00259 ..............$272.56 Chapter 17 Pitch-Roll-Trim .........................01-00275 ...................$91.98 7 Fuselage Exterior ......................... 01-00260 ..............$200.38 Chapter 18 Canopy ....................................01-00277 .................$743.45 8 Headrest, Heatduct, Seatbelt ....... 01-00261 ..............$554.06 Chapter 19 Wings & Ailerons .....................01-00280 ..............$2,653.33 9 Main Gear-Brake .......................... 01-00263 ...........$2,118.79 Chapter 20 Winglets & Rudders.................01-00282 .................$168.88 10 Canard Construction .................. 01-00264 ..............$636.38 Chapter 21 Strake-Fuel-Baggage .............01-00283 ..............$1,052.68 11 Elevators..................................... 01-00266 ................$61.73 Chapter 22 Electrical ..................................01-00285 ..............$1,089.90 12 Canard Installation ..................... 01-00267 ..................$3.27 Chapter 23 Engine-Prop Installation .........01-00286 ..............$1,531.88 13 Nose Gear .................................. 01-00268 ...........$1,541.50 Chapter 24 Covers Fairing ........................01-00291 .................$249.17 14 Center section Spar.................... 01-00271 ..............$629.33 Chapter 25 Finishing ..................................01-00292 .................$548.35 AIRCRAFT SPRUCE ADDS COZY BUILDER SUPPORT TEAM - Aircraft Spruce has recently contracted with Marc Zeitlin, and experienced builder, to provide technical builder support to Cozy builders who can contact Marc by email at marc_zeitlin@alum.mit.edu or by phone (978) 502-5251. In addition, Aircraft Spruce has contracted with Burrall Sanders of Free Flight Composites to have a Cozy aircraft on display and to answer builder questions at AirVenture, Sun N Fun, and other selected fly-ins. Burrall can be contacted by email at composite craftsman@freeflightcomposites.com or by phone at (719) 660-8650. Aircraft Spruce & Specialty Co. has acquired the design rights to the popular Christavia MK1, Christavia MK2, and Christavia MK4 homebuilt aircraft from the designer, Ron Mason of Elmwood Aviation in Canada. The Christavia was designed in 1982 as a mission field workhorse. Design requirements were short take-off and landing, small engine (low fuel consumption), low stall speed, good cruise speed and rate of climb, large cabin area, low maintenance and high safety factor. The Christavia is easy to fly, and the Iarge cabin makes long flights very comfortable. Over 1000 sets of the plans have been sold for the MK1 (two place tandem), MK2 (two place side-by-side), and Christavia MK4 (four place). Aircraft Spruce has plans available for these aircraft at $225 per set as well as an information pack for $10. Complete materials packages for construction of the aircraft are available from Aircraft Spruce. Christavia MK-1/MK-2 Info Pack P/N 01-00662 ............................................................. FREE
Spruce Kit for MK-1 ......... 01-39810 ...... $865.00 Plywood Kit (MK-1) .......... 01-39820 ...... $483.65 MK-1 Alum. Sheet Kit ...... 01-39830 ...... $641.05 MK-1 4130 Tube Kit......... 01-39840 ... $3,938.80 MK-4 Plans ...................... 01-00665 ..... $275.00 MK-4 4130 Sheet Kit ....... 01-00676 ..... $601.60 MK-4 Hardware Kit .......... 01-00679 ..... $253.59
MK-1 4130 Sheet Kit .....01-39850 ...... $291.41 MK-1 Hardware Kit ........01-39860 ...... $136.49 MISC Kit for MK-1..........01-39870 ... $5,649.75 MK-1 Spruce Kit ............01-39880 ...... $865.00 MK-4 4130 Tube Kit ......01-00674 ... $4,346.87 MK-4 Plywood Kit ..........01-00677 ...... $569.30
11
The Starduster Too was built to fill a need for a reasonably sized, 2-place, open sport biplane. Stability is good and the light wing loading makes slow landing and short-field operation outstanding. The main structure of the aircraft is built of 4130 steel tubing and sheet stock and has no machined fitting or other complicated bends. The wings have spruce spars and the ribs are made of 1/4 plywood. Construction of the plane has been kept as simple as possible. The Lycoming 0-360 (180 hp or 200 hp) is the best size engine for the aircraft. Plans ...........................P/N 01-00424 .................. $250.00 Info Pack .....................P/N 01-00596 ......................FREE
This two-place biplane is about 10% smaller than the Starduster Too. It is a very strong machine designed to +/-9 G. It is a high performance machine meant for minimum of 180 and up to 360 horsepower. The roll rate is spectacular with four ailerons and symmetrical wings. Plans ........................... P/N 01-00427 ......................$78.50 Info Pack ..................... P/N 01-00443 ....................... FREE
A low-horsepower, single-place parasol, this is a fun machine. Easy to build and easy to fly, it is the best of both worlds. Engines in the 65 to 125 HP range work best. Excellent visibility and a pretty design keep your excitement high. Plans ...........................P/N 01-00428 ...................$125.00 Info Pack .....................P/N 01-00463 ...................... FREE
STARLET SA 500
05-01104 .......... STARDUSTER AILERN DRV HRN ASSY ............. $101.35 05-01112 .......... STARDUSTER AILRN SLV STRT HRN ................ $140.65 05-01142 .......... STARDUSTER TOO SA300 GRAY BUBL ............. $167.75 05-01211 .......... STARDUSTER TOO TIE ROD SET W/T ............ $2,983.00 05-19700 .......... FUEL TANK STARDUSTER I (MAIN) .................... $514.00 05-19710 .......... FUEL TANK STARDUSTER I -INVERT ................. $613.00 05-19720 .......... FUEL TANK STARDUSTER I (WING) ................... $437.95 05-19800 .......... FUEL TANK STARDUSTER II (MAIN) ................. $$826.00 05-19810 .......... FUEL TANK STARDUSTER II INVERT ................. $824.00 05-19820 .......... FUEL TANK STARDUSTER II (WING TANK) ....... $870.00 06-00173 .......... STARDUSTER TOO BUNGEE CORD..................... $21.50 06-00174 .......... STARDUSTER TOO ALUM LNDGNG GR ......... $1,145.00 06-00177 .......... STARDUSTER TOO STEEL LNDG GEAR......... $1,996.00 06-00179 .......... STARDUSTER 500X5 WELD-ON AXLE.................... $9.70 06-03935 .......... STARDUSTER II LANDING GEAR*.................... $1,745.00 08-00897 .......... STARDUSTER TOO STD ENG MOUNT ............ $2,368.00 08-00898 .......... STARDUSTER TOO SA300 FRWL GALV............. $631.00 08-00901 .......... STARDUSTER EXHAUST SYSTEM 6CYL ........... $630.00 08-00966 .......... STARDUSTER TOO FIREWALL SS...................... $629.00 08-00967 .......... STARDUSTER TOO FIREWALL GALV ................. $606.00 13-02417 .......... STARDUSTER TECHNICAL TIPS ........................... $35.00 13-02434 .......... 1 STARDUSTER PIN ............................................... $10.50 13-02436 .......... STARDUSTER PATCH SMALL ................................. $8.75 13-02676 .......... STARDUSTER DECAL ............................................ $14.95 01-00468 .......... SUPERSTARDUSTER BLDG THE GOLD6............. $25.00 05-03381 .......... VITON 75 41 X 2 MM O-RING ................................... $1.45
This is an exciting, single place biplane. Rated for +/-6 G, this machine will keep you smiling. With stall speed approaching 35 mph and horsepower in the 75 to 85 range, fun flying is not slowed at the gas pump. Plans ........................... P/N 01-00429 .................. $195.00 Info Pack ..................... P/N 01-00471 ......................FREE
V-STAR SA 900
This is the single place biplane designed by Lou Stolp back in 1964 that started it all. It as a very easy aircraft to fly, powered by engines in the 125 horsepower range - A fun machine! Constructed with a 4130 steel fuselage, wood spars and ribs, and covered with fabric. The Starduster One can only classified as classic. Plans............................P/N 01-00425 ..................$115.00
*Note: This Landing gear is NCNR, may not be cancelled or returned. Lead times are always 6-8 weeks.
ORDER PLANS, COMPLETE MATERIAL KITS AND REQUEST FREE KIT LISTS FOR ALL STARDUSTER AIRCRAFT DIRECT FROM AIRCRAFT SPRUCE.
12
BABY GREAT LAKES, SUPER BABY LAKES, AND BUDDY BABY LAKES
BABY GREAT LAKES MATERIALS REQUIREMENTS
Spruce and Plywood Kit................. P/N 02-03910 ..... $1,021.91 Complete Spruce Kit Only ................ P/N 02-03900 ........ $782.51 Spar Kit only...................................... P/N 02-06700 ........ $541.50 Kit #2 Wing Metals Package ..................... P/N 01-10020 ..... $1,171.00 Includes finished parts requiring machining Kit #3A Wing Hardware Kit (Baby Great Lakes) ......................... P/N 01-10030 .......... $68.64 Kit #3B Wing Hardware Kit (Super & Buddy).............................. P/N 01-10035 .......... $64.44 Kit 4130 Steel Tubing and Sheet Kit Baby Great Lakes Kit-4A .................. P/N 03-14300 ..... $1,315.46 Super Baby Lakes Kit-4B.................. P/N 03-14310 ..... $1,397.86 Buddy BabyLakes Kit-4C .................. P/N 03-14320 ..... $1,559.14 Kit #5 Landing Gear/Brakes Kit ................ P/N 01-10040 ..... $2,998.39 Kit #6 Wing Alignment Materials Package. P/N 01-10050 ............ $9.10 Kit #7 Fuel Tank and Installation Package P/N 01-10060 .......... $67.09 Kit #7A Fuel tank Installation Kit ................ P/N 01-10070 .......... $67.09 Kit #8 Flying Controls Materials Package . P/N 01-10080 ........ $949.18 Kit #9 Fairings, Firewall, Instrument & .... P/N 01-10090 ........ $763.04 Fuselage Panels w/Hardware Kit #10 Poly - Fiber Materials Package ...... P/N 01-10095 ..... $2,295.66 Baby Great Lakes Top Nose Cowl.................. P/N 05-02883 ........ $223.95 Baby Great Lakes Bottom Nose Cowl ............ P/N 05-02884 ........ $250.00 Seat for Buddy Great Lakes ............................ P/N 05-02885 ........ $250.00 Baby Great Lakes Fuel Tank (Standard 10 Gal.) ........................................... P/N 05-03058 ........ $943.00 Baby Great Lakes Feul Tank( 3 Longer 11 Gal.) . P/N 05-03059 ........ $992.00 ASK ABOUT THE MANY PRE-FABRICATED PARTS AVAILABLE FOR BABY GREAT LAKES AIRCRAFT. Kit #1
The Baby Great Lakes (one place) and Buddy Great Lakes (two place) aircraft are well proven designs which are easy to construct and fly, provide classic good looks, and are aerobatic. Construction is of wood and steel tubing and plans are well presented for the first time builder. Aircraft Spruce & Specialty Company acquired all rights to these designs in May, 1996 and now offers info packs, plans, raw materials kits, and pre-fabricated kits for these fine aircraft. Contact Aircraft Spruce for information on info packs and plans. Baby Great Lakes Info Packs.................P/N 01-10013 ................ FREE Plans for Baby Great Lakes ...................P/N 01-10010 .............$295.00 Plans for Super Baby Lakes...................P/N 01-10011 .............$295.00 Plans for Buddy Baby Lakes ..................P/N 01-10012 .............$275.00
ACROLITE
ACROLITE KITS
Info Pack, ................................................. P/N 01-20005..............FREE Plans, ....................................................... P/N 01-20090.......... $300.00 Plans Kit includes Plans, Builders Manual, Maintenance Manual and Photo Set.
MATERIALS REQUIREMENTS
Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit #1 Aluminum Tube Kit, ...................... P/N 01-20010.......... $377.30 #2 4130 Tube Kit, .............................. P/N 01-20015.......... $914.08 #3 Aluminum Sheet and Bar Kit, ....... P/N 01-20020.......... $447.64 #4 4130 Sheet and Bar Kit, ............... P/N 01-20025.......... $537.55 #5 Aluminum Wing Kit, ...................... P/N 01-20030....... $1,833.20 #6 Misc. Wood Kit, ............................. P/N 01-20035.......... $168.88 #7 Wood Wing Kit (Optional), ............ P/N 01-20040....... $2,212.81 #8 Fastener kit, .................................. P/N 01-20045.......... $201.95 #9 Control System Kit, ....................... P/N 01-20050.......... $995.68 #10 Fuel System Kit, .......................... P/N 01-20055.......... $457.22 #11 Misc Hardware Kit, ...................... P/N 01-20060............ $93.26 #12 Wheels and Brakes , .................. P/N 01-20065.......... $255.10 #13 Misc. Accessories Kit, ................. P/N 01-20070.......... $381.22 #14 Basic Instruments Kit, ................. P/N 01-20075....... $1,407.45 #15 Covering Kit, ............................... P/N 01-20080.......... $951.45 #16 Cowl Kit, ...................................... P/N 01-20085.......... $167.45
Aircraft Spruce & Specialty is the exclusive supplier of plans and materials packages for Ron Wilsons aerobatic aircraft design, the single seat Acrolite. Complete construction material packages, 16 in total, for the Acrolite can be purchased for under $10,000. The Rotax 912 engine is used in the prototype. The Acrolite can also be built with the Rotax 532-618. Acrolites are designed to be a quick, easy build for beginners. The biplane cruises at 110 mph, has a range of 250 miles, takes off and lands in 500 feet and has a service ceiling of 12,000 feet. Empty weight is 495 lbs. and gross is 750. The airplane stands six feet tall, is 17 long and has 133 square feet of wing area. It is designed for sportsman aerobatics. The Acrolite was chosen as one of two finalists in the Scratchbuild Design Contest which was sponsored by Aircraft Spruce & Specialty.
13
AIRCRAFT KITS
We all want to fly fast and land slow. Sylvester Steve Wittman solved the problem. Wittman built two types of airplanes: Racing machines and Travel machines. The ancestors of these two blood lines were Chief Oshkosh and Buttercup.The Buttercup was built as a utility hauler, and there was only one made - in 1937. He flew it all over the western hemisphere, from Alaska to Bermuda, Florida to Oregon. The Buttercup almost made it into production (cancelled due to WWII) coming to the interest of Fairchild as a four-place project, called the Big X. One plane was built for them by Witt - a 4-place, 6 cylinder, 130 HP Franklin powered prototype. The real genius of the Buttercup design is Wittmans claim of 38 - 40 mph (indicated) slow-flight speed and a near 150 mph top speed, and all on 85 hp! The high speed is vintage Wittman, the low speed is due to an ingenious flap-coupled, retracting lead edge design (seen in todays airliners). Earl Luce of LuceAir, Inc. has revived the Buttercup, featured in the April, 2003 issue of Sport Aviation. Kits and fabricated assemblies for the Buttercup are available from Aircraft Spruce. For info and plans contact: LuceAir 35 Beverly Dr. Brockport, NY 14420 Ph: (585) 637-5768 www.luceair.com e-mail: earl@luceair.com Buttercup Retrack Lead Edge Kit ............... P/N 01-00474 ......... $344.31 Buttercup Fuselage Sides Kit ..................... P/N 01-00475 ......... $424.37 Buttercup Fuselage Completion Kit ............ P/N 01-00476 ......... $319.41 Eppenage Vert-Hort Stabilizer Kit............... P/N 01-00477 ......... $317.52 Buttercup Wing Wood Kit ........................... P/N 01-00478 ......... $927.79 Buttercup Wing Metal Kit ............................ P/N 01-00479 ......... $768.77 Buttercup Flaps & Ailerons Kit .................... P/N 01-00480 ......... $250.79 Buttercup Lift Strut Kit................................. P/N 01-01055 ......... $838.85 Buttercup Engine Mount-Land Gear ........... P/N 01-00482 ......... $130.50 Buttercup Controls & Finishing ................... P/N 01-00483 ......... $213.58 Buttercup Covering Kit................................ P/N 01-00571 ...... $2,281.75
WITTMAN BUTTERCUP
SONEX
Unique in design, the Sonex is a basic and economical all metal twoplace monoplane. Both taildragger and tri-gear versions are available. The Sonex is 17.5 ft. in length and has a 22 ft. wing span. It features easily removable wings for transport and storage. Designed to meet the needs of both European and domestic aviators, it can incorporate various lightweight contemporary engines of 80-120hp (under 200 lbs. firewall forward). Suggested engines include the 2180 VW and 80-120hp Jabiru engines. Outstanding performance is achieved through its clean aerodynamic shape and simple, lightweight construction.
Pazmany PL-2
LONG-EZ
The original German Luftwaffe Fieseler F-156 Storch was an outstanding WWII airplane, designed to take off and land in extremely short distances. The Storch had a take off ground roll of 131 feet and a landing roll of 36 feet with 13 miles per hour head wind. The Pazmany PL-9 Stork is a 3/4 replica. With the same flying and handling characteristics as the original German Aircraft. The PL-9 Stork is a professionally designed STOL aircraft. It has a well proven aircraft configuration designed for a number of functions such as fish spotting, forest fire detection, farm work, missionary work etc. It features a welded chrome alloy steel tube fuselage and aluminum sheet metal/fabric covered wings and empenage. The PL-9 Stork has a cruise speed of 104mph with a standard Lyc.O-320/150 hp engine. Aircraft Spruce is a major supplier of materials for the PL-9 Stork. For more information, info pack and plans, contact: Pazmany Aircraft Corp. P.O. Box 80051 San Diego, CA 92138 Phone: (619) 224-7330 Fax: (619) 224-7358 info@pazmany.com www.pazmany.com PL-9 Plans ..................................P/N PL-2 Plans ..................................P/N PL-2 Homebuilding Profile..........P/N PL-4A Plans................................P/N (Now part of the LSA class)
PAZMANY PLANS
13-01505 ....... $550.00 13-01506 ....... $425.00 13-01509 ......... $12.00 13-01507 ....... $375.00
The Long-EZ designed by Burt Rutan, is a homebuilt aircraft derived from the VariEze. Changes from the VariEze include a larger main wing with modified Eppler 1230 airfoil and less sweep, larger strakes containing more fuel and baggage storage, slightly wider cabin, and the ability to use a Lycoming 108 hp engine with no nose ballast. The aircraft is designed for fuel-efficient long-range flight and can fly for over ten hours and up to 1,600 miles (2,500 kilometers) on 52 gallons (200 liters) of fuel. The pilot sits in a semi-reclined seat and controls the Long-EZ by means of a side-stick controller situated on the right-hand console. In addition to having an airbrake on the underside, the twin tails wingtip rudders can be deflected outwards to act as auxiliary airbrakes. The aircraft will not stall in the manner of a conventional aircraft since, if the Long-EZ reaches too low a speed, the front (canard) wing will stall and lower the aircraft nose until speed is regained. Kit lists and kit components are available upon request. Please call or visit our website for more information.
14
AIRCRAFT KITS
EVANS VP-1 VOLKSPLANE
Aircraft Spruce & Specialty Company offers a complete set of plans for the single seat aerobatic aircraft known as the One Design. Created by Dan Rihn as an economical answer for pilots wishing to fly Basic through Advanced aerobatics, the One Design features quick, easy construction and excellent performance. Wings for the One Design are all wood, the fuselage is steel truss, covered with aluminum sheet from the firewall to the rear of the cockpit. The turtle deck is also aluminum and the lower half of the aft fuselage is fabric covered. The tail is fabric covered. A one piece aluminum spring gear is used for the main wheels and a steerable tailwheel is used. Power for the One Design is obtained from a 0-360 and modified with an inverted oil system, high compression cylinders and fuel injection. Stressed for +/- 10 Gs, the One Design has a max. level speed of 184 mph, and cruises with a 75% power setting at 160 mph. ONE DESIGN INFO PACK P/N 01-06005 ..................FREE ONE DESIGN PLANS - Complete construction drawings required to build the One Design aircraft from scratch or using pre-fabricated components. P/N 01-06010-C .......... $376.95 Note: A signed License Agreement is required from the builder prior to shipment of plans. Include completed License Agreement with your payment.
ONE DESIGN
Aircraft Spruce & Specialty is the exclusive distributor for VP-1 materials kits. The Volksplane was designed and prototyped by Bud Evans in 1968. The aircraft is inexpensive, easy to build, and fun to fly. The fuselage is all wood, with three bulkheads, four longerons, flat plywood and some vertical stiffners. Wings are wood frames covered with fabric. The only parts requiring welding are the control stick, strut ends and stabilizer horn. The only sheetmetal work is in the elevator trim tab. Over 1000 of these planes are flying. The aircraft is ideally suited for Volkswagen engines in the 1500 to 1834 cc range. Plans for the VP-1 are $59.00 and are available from Aircraft Spruce, P/N 13-11560. Aircraft Spruce can supply complete materials kits from stock. Free kit list on request. Note: Landing gear is NCNR, may not be cancelled or returned. Lead times are always 6-8 weeks. For further information on the Evans VP-1 contact: Evans Aircraft Box 744, La Jolla, CA 92037. VP-1 Kits Part No. Price Wood kit .........................(VPK-1) ........................01-00222 .....$698.60 Plywood kit .....................(VPK-2) ........................01-00223 .....$737.55 Metal kit..........................(VPK-5) ........................01-00224 .....$279.98 Hardware kit ...................(VPK-7) ........................01-00228 .....$437.46 Fabric kit ........................(VPK-8) ........................01-00221 .....$598.16 Fabric Coating kit ...........(VPK-9) ........................01-00226 .....$515.75 Cable Assy. kit ..............(VPK-10) ......................01-00227 .....$933.92 Wing Strut kit .................(VPK-11) ......................01-00225 .....$469.27 Landing Gear 800 lb. .....(VP-1 cable-braced) .....06-00041 .....$735.00 Landing Gear 800 lb. .....(VP-1 free standing) .....06-04040 ..$1,105.00 Landing Gear 1100 lb. ...(VP-2 free standing) .....06-00043 ..$1,275.00 VP-1 Plans and Handbook ..................................13-11560 .......$59.00
This is the famous aircraft that launched an industry as well as the Experimental Aircraft Association when plans for it were published in Popular Mechanics in the early 50s. It is lightweight, easy to build, fun to fly and requires minimal maintenance. It has been modified from the original Corben Baby Ace so that it can utilize aircraft engines. The fuselage has also been widened, the horizontal stabilizer was modified for easier construction and modern aircraft wheels and brakes are now called for. With nearly a 34 wingspan and Clark Y airfoil, the Pober Junior Ace, designed by EAA founding president Paul Poberezny, is docile in stall and landing patterns. Airframe is 4130 steel tubing, wings are all wood and the recommended powerplant is a Continental C-85. Empty weight of the Junior Ace is 750 pounds and gross capacity is 1,320 pounds. Free brochure available from Acro Sport. Plans can be ordered from Acro Sport, Inc., Box 462, Hales Corners, WI 53130. Order your Junior Ace materials kits form Aircraft Spruce, the approved materials supplier. Free kit list.
The Volmer VJ-22 Sportsman is a two-place, side by side, closed cabin, highwing monoplane, amphibious flying boat. The original Sportsman was completed December 1958. The rigid, corrosion proof hull is made of 1/16 inch and 3/32 inch aircraft mahogany plywood with 1/4 inch plywood at the step for maximum strength and covered with fiberglass for added protection. Numerous testing from calm water to five foot swells in the open sea have proven the design to be both extremely airworthy and seaworthy. Wings are wood spar and ribs, fabric covered. It takes off from water at sea level in about 20 seconds. The VJ-22 is poweed by a Continental C-85, starter and gen. It has a cruising speed 85 mph and stalls at 45 mph Volmer Club of America - Attn: Robert Albrecht 536 Oak Ave., Bridge City, LA. 70094 - Ph: 504-436-6248 rjaflys@aol.com www.volmeraircraft.com VJ-22 Spruce Wing Kit ...........................................................P/N 02-06000 ......................................$1,634.43 VJ-22 Sportsman Fuselage Kit ..............................................P/N 01-00984 ......................................$4,541.00
15
AIRCRAFT KITS
ACRO SPORT
Designed by Paul Poberezny as a successor to the EAA Biplane, the Acro Sport offers performance and excellent aerobatic capability in the Sportsman and intermediate categories. Purposely uncomplicated and straight forward, the Acro Sport design has been chosen by hundreds of schools for project Schoolflight programs. It has a wide landing gear which provides superb ground handling and easy landing qualities. Builders can choose powerplants ranging from 85 hp to 200 hp. Features steel tube fuselage, spruce wing and overall fabric covering which makes the project an easy one for first time builders with average skills. Maximum speed for this diminutive biplane is 180 mph, it cruises at 130 and stalls at 50. It has a rate of climb of 3,500 ft/min and a range of 350 miles. Info packs are $10.50 and complete plans are $125.00. Order from: Acro Sport Inc., Box 462, Hales Corners, WI 53130. Free kit list on request.Tech support for Acro Sport: Steve Nanweiler, 4819 Farmstead Ct., Wichita, KS 67220, (316) 744-0234 Note: Landing gear is NCNR, may not be cancelled or returned. Lead times are always 6-8 weeks.
ACRO SPORT II
This versatile biplane offers the outstanding opportunity to experience open cockpit flying with a friend. Excellent aerobatic trainer with responsive controls and docile straight and level flight characteristics. Powerplants can range from 108 hp to 200 hp. Cruise at 123 mph (180 hp), stall at 53 and max out at 152. The wide gear, large wheels and outstanding roll rate make the Acro Sport a dream on the ground, nimble in the air and a cinch for smooth landings. Designed by EAA founding president Paul Poberezny, the Acro II will accommodate pilots up to 6 6 and 240 pounds. As with all Acro Sport projects, the fuselage is welded steel tube, wings are spruce and Stits Poly-fiber is used for covering. Information packages are available for $10.50 and full sets of plans run $125.00 from Acro Sport, Inc., Box 462, Hales Corners, WI 53130. Free kit list on request.Tech support for Acro Sport: Steve Nanweiler, 4819 Farmstead Ct., Wichita, KS 67220, (316) 744-0234 Note: Landing gear is NCNR, may not be cancelled or returned. Lead times are always 6-8 weeks.
Designed by George Meyer, the Little Toot was first flown in 1957 and in the same year took the top award from mechanic Illustrated for Outstanding Achievement in a Homebuilt Aircraft at the 1957 EAA convention in Milwaukee. Little Toot also won the Paul H. Poberezny Award two years in a row. Year 1999 and 2000. Today the aircraft is still popular in appearance and functionality. Little Toot is a Single Seat, Sports Biplane. The fuselage is an all-metal structure with metal-covered steel tube construction from rear of cockpit forward, and metal monocoque rear of tubular fuselage cockpit forward section. Our Plans also provide you with an alternate Tube and Fabric fuselage construction. It features all wood wings, two 1 thick spar structure with fabric covering. Fabric covered all metal full-length ailerons on lower wings only. No Flaps. Little Tot has super strong structure stressed to 10- and 10+ Gs. Power Plant options include 4-cylinder engines of up to 200 hp and six cylinders up to IO-540 250 horse power. Full Size Plans ........................................ P/N 01-01049.....................................$345.00 Plans - 11 x 17 Booklet ........................... P/N 01-01050.....................................$135.00 For more info and plans contact Tommy Meyer: Website: www.littletootbiplane.com Email: tommy@littletootbiplane.com Phone: 817-269-9292
16
AIRCRAFT KITS
The new AQUAJET X, designed by Don James, and inspired by forthcoming warbirds F22 Raptor and X35 Joint Strike Fighter, provides the next level of flying excitement and realism between the AquaJet and a real airplane. To provide vectored thrust via rudder pedals while creating the jet engine sound you can add an electric leaf blower (electric leaf blower is not included with the kit). Also there is a more sophisticated suspension system. Thus, the Aquajet X can climb at 30 deg., dive at 15 deg., bank, turn and spin up to three revolutions under full control of the pilot. A throttle actuates the lift cylinder - controlling takeoff, climb and descent so the stick can control pitch and landing flare.*Note: The Aqua Jet kit list includes all of the parts we can provide. Other items are required to build the Aqua Jet and many of them can be sourced at hardware stores and building centers. For more information visit our website at www.aircraftspruce.com Aquajet X Plans ................................ P/N 01-00962 ......................$95.00 Aquajet X Materials Kit ..................... P/N 01-00964 .................$1,037.90 The KR-1 (single place) and KR-2 (two place) were designed in the early 1970s by the late Ken Rand. These popular aircraft combine composite and wood construction to produce fast, efficient aircraft that remain good sellers year after year. Contact: NV AERO AEROSPACE, LLC, 23052H Alicia Parkway #413, Mission Viejo, CA 92692 Phone: (800) 515-4811 Fax: (888) 829-3502 Email: info@nvaero.com KR-1 Complete Spruce Kit .................. P/N 02-05400 ............... $836.86 KR-2 Complete Spruce Kit .................. P/N 02-05500 ............ $1,008.91 KR-2S Complete Spruce Kit................ P/N 02-05510 ............ $1,079.72 The Skybolt is a 2 place fully aerobatic biplane which is also an excellent cross country aircraft. It is larger and easier to handle than smaller biplanes, and construction can be completed with hand tools by first time builders. Aircraft Spruce has provided materials for many Skybolt builders around the world for over 20 years. Contact: Steen Aero Lab, 1451 Clearmont St NE, Palm Bay, FL 32905 Ph (321) 725-4160 Fax (321) 725-3058 Complete Spruce Kit ............. P/N 02-05700 ........................... $1,259.84 Spruce Spar Kit ..................... P/N 02-07900 ........................... $1,021.80 4130 Steel Kit ........................ P/N 03-15500 ........................... $2,849.30
AQUAJET-X
Plans for Daisy Mae consist of 22 pages that are sized 18 by 24 with full size rib and former drawings and a hardware sheet that shows what parts you will need to fabricate while building the airplane. Each plan has a serial number and carries a copyright. Each page is dimensioned so that you will know the exact size of everything you need to build and has many 3 dimensional drawings and exploded views for ease of understanding. In addition, every plans purchase includes a CD loaded with over 280 photos taken during the construction process. You know what they say: A picture is worth a thousand words and these will make it perfectly clear how each part was fabricated. The CD is mailed directly from the plans owner following registration of the plans. Specifications: Wing Span - 23, Empty Wt. - 780 lbs., Wing Area 173, Normal Flying Wt. - 1100 lb., Fuselage Length - 18.5 , Gross Wt. - 1300 lb., Fuselage Height - 7, Stall Speed - 40 Mph. Daisy Mae Plans .......................................P/N 01-01003 ...........$165.00 Daisy Mae Materials Kit ............................P/N 01-01160 ........$4,044.18 The Making of the Daisy Mae Book ..........P/N 13-04086 .............$34.95
DAISY MAE
GP-4
SKYBOLT
Designed by George Pereira, the GP-4 is a high performance two place side-by-side kit aircraft which is a fast, efficient cross country performer. Construction is primarily of wood and steel. The GP-4 is becoming the choice of many builders seeking a solid, traditionally constructed scratch built aircraft. Complete Spruce Kit .....................P/N 02-25200 ................... $4,284.40 4130 Steel Kit ................................P/N 02-25210 ...................... $821.59 Plywood Kit....................................P/N 02-00078 ................... $3,211.40 Osprey Aircraft 3741 El Ricon Way, Sacramento, CA 95825 info@ospreyaircraft.com www.ospreyaircraft.com
OSPREY
BREEZY
The Osprey is a 2-place amphibian aircraft with fully retractable landing gear. The Osprey utilizes wood and steel construction and is ideal for the first time builder seeking well presented plans, ease of construction, and the versatility of an amphibian aircraft. Complete Spruce Kit ............................ P/N 02-05100 ...........$4,175.05 Osprey Clear Canopy ........................... P/N 05-01162 ..............$513.00 Osprey Tinted Canopy ......................... P/N 05-01163 ..............$425.00 Picture Decal Left Black ....................... P/N 09-43813 ................$17.95 Osprey Aircraft 3741 El Ricon Way Sacramento, CA 95825 Info@ospreyaircraft.om www.ospreyaircraft.com Wing and Aileron spars are furnished to net dimensions, not beveled.
Designed by Carl Unger the Breezy was first introduced in 1965, and hailed as one of the most distinctive and unusual homebuilt designs to
ever attend an EAA Fly-in. Though there have been a lot other designs, particularly homebuilts, that embody the open cockpit which trademarks a Breezy, nothing can surpass it for the view and fresh air feeling. The original Breezy was designed and built to accept a set of PA-12 wings. For that reason, there are no wing drawings with the plans. It is possible to substitute PA-14, PA-18, or J-3,4, or 5 wings. Its also possible to order wing kits that replicate a J-3 wing. Power for the prototype, which now hangs in the EAA Aviation Museum in Oshkosh, WI, is a Continental C-90. The Breezy will carry a pilot and two passengers. Contact Aircraft Spruce for FREE Kit List. Carl Unger, 8751 S. Kilbourn, Oak Lawn, IL 60456 PH: (708) 636-5774 Misc Hdwe kit .................... P/N 01-30010.................. $599.17 Breezy Steel Kit ................. P/N 01-30020............... $3,107.24 Breezy Aluminum Kit ......... P/N 01-30030.................. $183.67
17
AIRCRAFT KITS
BARRACUDA FLY BABY
The Barracuda, made entirely of spruce and plywood, is a fast, high performance, side by side two-place with retractable, tricycle gear. Rated for limited acrobatics, it has a 200 MPH cruise speed and 2,100 FPM rate of climb with a Lycoming 0540 Engine. Designed by RAF pilot, Geoff Siers, to fly like a fighter, power may vary from 200 to 300 horsepower. A stall speed of 62 makes landing easy. The comfortable 40 inch wide cockpit, with the sound deadening properties of wood, makes it a wonderful cross-country tourer. The structure is elegant and simple, like a model airplane, with no complex jigging. The Barrcuda won the most outstanding new design at Oshkosh. Aircraft Spruce & Specialty Co. is the distributor for materials kits and component parts. For further information and plans, contact Siers Flight Systems, Inc 4706 N.E. First CT. Rentan, WA 98059 Phone (425) 478-3655 Plywood Kit.............................. P/N 01-00577 ........................ $2,582.75 Spruce Spar Kit ....................... P/N 01-00617 .......................... $868.75
PIETENPOL AIRCAMPER
This plane is a structurally simple and easy-to-fly airplane designed to the requirements of the Experimental aircraft Association for home construction and storage in a space 7 x 8 x 20, which is equivalent to the standard home garage. Great emphasis has been placed upon safe flight characteristics and good low speed performance for takeoff and landing at some sacrifice of high speed. The structure has been designed for standard airplane engines from 65 to 85 horsepower and the aerodynamic features are of sizes and proportions suited to obtaining the best all-around performance in this power range. Because of this, there is not enough advantage to be gained from using engines of significantly higher power to offset the cost and weight penalties. Increasing the power to increase the aerobatic capability is not recommended. FLY BABY will do simple recreational aerobatics very well but is not intended for rough air show or competition maneuvers. Fly Baby Spruce Kit.......................P/N 01-00977 ................... $1,905.55 Fly Baby Plywood Kit ....................P/N 01-00974 ................... $1,382.74 Fly Baby Metals Kit .......................P/N 01-00976 ...................... $955.64 Fly Baby Hardware Kit .................P/N 01-00975 ................... $2,146.22 Contact David R. Bowers: 13730 Burke Road, Los Altos Hills, CA 94022-3549 ph: (605) 948-3229 Htpp://www.bowersflybaby.com
The Bakeng Deuce is a two place parasol that is great for plain every day or weekend flying. It is of a basic aircraft design utilizing a steel tube fuselage. The structure is faired with plywood and aluminum formers which support spruce stingers. Wings are of basic wooden construction with solid spruce spars. The Deuce is a very easy aircraft to build with an excellent set of plans. It has a max. speed of 140 mph, cruises at 110-120 mph with a stall speed of 35-40 mph. Bakeng Deuce Airplane Factory 9850 52nd Street, Kenosha, WI 53144 Ph: (262) 658-9286 e-mail: acole@interaccess.com Spruce Spar Kit ................................ P/N 02-06800 ...................$496.00
BAKENG DEUCE
The two-seat all-metal STOL CH 750 has been developed as an offairport short take-off and landing kit aircraft to fulfill the demanding requirements of both sport pilots and first-time builders. Designer Chris Heintz has combined the capabilities and advantages of a bush-plane with the advantages of a modern design, such as tricycle gear configuration and all-metal aluminum alloy construction available in an advanced CNC-produced kit featuring match-hole technology. The light sport utility aircraft craft features fixed leading-edge slats for high lift, full-span flaperons (both ailerons and flaps), an all-flying rudder, and durable all-metal construction. With form following function, the popular STOL CH 750 design can be built from complete kits, component buy-as-you-build (section) kits, or it can be built from plans-only (blueprints) with common aircraft materials and tools (available from Aircraft Spruce). For detailed info on all Zenair kit aircraft designs contact: Zenith Aircraft Company Mexico Memorial Airport, PO Box 650 Mexico, Missouri, 65265-0650 USA. Ph: (573) 581-9000 (Mon-Fri, 8-5 Central), Fax: 573-581-0011 info@zenithair.com www.zenithair.com
18
COMPOSITE MATERIALS
he use of composite materials in home built aircraft construction got its start back in 1970 when Ken Rand introduced his KR-1 and KR-2 kits. At the same time, a young designer named Burt Rutan was completing the design of his VariViggen which was awarded the Stan Dzik trophy for design contribution at Oshkosh in 1972. Although this aircraft featured some composite construction materials, it was fairly labor intensive to build and interest was modest. Taking the canard design concept a step further and simplifying construction through the use of the moldless composite technique, Burt educated thousands of builders and future designers through his plans, construction manuals, and many seminars and convinced aircraft enthusiasts worldwide that composites were indeed the future for aviation construction. Rutan Aircraft Factory followed the tremendous success of the VariEze kit program with plans for new designs such as the Long-EZ, Defiant, and Solitaire. At the same time, SCALED, Burts new company specializing in design and prototype construction, was busy building proof-of concept aircraft such as the AD-1, Grizzly, and Beech Starship. Burt continues to operate SCALED today and remains active in designing and building the aircraft of tomorrow. We hope he will someday return to the homebuilt aircraft market, and arena that allowed him endless freedom to pursue aircraft design innovation.
INTRODUCTION
CM WP ME HA AP LG EP CS IN EL AV
uring the 1980s many new designers entered the homebuilt aircraft market including Nat Puffer who introduced the popular Cozy, a side-byside version of the Long-EZ. Aircraft Spruce & Specialty Co. became the distributor of Cozy kits as it had been for the Rutan designs since 1976. Hundreds of kits were shipped worldwide, and Aircraft Spruce grew as quickly as the composite movement. At the same time, Aircraft Spruce began supplying kits and materials to designers marketing their own new designs using the new fast-build pre-fabricated kit concept. This type of kit program was pioneered by Tom Jewett and Gene Sheehan of Quickie Aircraft and Tom Hamilton of Glasair fame. Many new designs followed, including Lance Niebauers Lancair, Ken Wheelers Express, the Cirrus and White Lightning. Aircraft Spruce has been a supplier of materials for all of these kit programs, and looks forward to working with the designers of new composite aircraft on their kit programs in the years to come. The design sophistication and ease of construction that are offered in composite aircraft kits today have provided a way for many aviation enthusiasts to build and fly higher performance aircraft at affordable prices. What an exciting time to be involved in sport aviation!
dvanced composite fabrics are those materials which have been used for a number of years in aerospace applications, replacing standard fiberglass fabrics. Todays materials - Kevlar, graphite, S glass and ceramics - are now making the transition from aerospace to homebuilt aircraft. Kevlar is an organic fiber which is yellow in color and soft to touch. It is extremely strong and tough and about the lightest structural fabric on the market today. Kevlar is highly resistant to impact but it is rather difficult to work with for hand layup applications and its compressive strength is considered poor. Graphite fibers are created by extreme stretching and heating of rayon fibers to change their molecular structure. Graphite has very low density (weight/unit volume), is very stiff (high modulus) and very strong (high tensile). S glass uses a different chemical formulation from standard E glass fabrics, and is stronger, tougher and stiffer than E glass. One ply of S glass can replace several plies of E glass, which can result in a stronger and considerably lighter aircraft component. Ceramic fabrics are the latest innovation in advanced composites. These fabrics produce laminates approaching the qualities of S glass plus they can withstand temperatures of almost 3000 F. Ceramic cloth can produce a very lightweight and effective firewall laminate, although at this time the cost is high. These advanced composite materials are currently being used in the production of such items as aerospace components, high-performance boats and race cars, and many revolutionary homebuilt aircraft such as the Long-EZ, Solitaire, Sea Hawk and Q200. The performance of future homebuilt aircraft will most certainly be incredible with the availability of these innovative new composite materials.
Best Cost Weight (Density) Stiffness Heat E Glass Kevlar Graphite Ceramic S Glass Graphite Kevlar S Glass S Glass S Glass Kevlar S Glass S Glass E Glass E Glass E Glass Graphite E Glass Ceramic Kevlar Ceramic Ceramic
ften the choice of the materials to use for a laminate is difficult because of the required properties. One must consider the advantages of one material over another and its anticipated performance. S glass is about 30% stronger and 15% stiffer than E glass. It has 20-25% of the stiffness of graphite and is as strong, but it is also 30% heavier. S glass though, has only half the strength and stiffness of Kevlar and twice the weight. Kevlar on the other hand, is 40% stronger and 25% lighter than graphite but has only half the stiffness of graphite. Sometimes, blending different advanced composite fabrics in a laminate can achieve the proper balance of stiffness, strength and weight. Use the following six parameters listed here, from a best to a worst case, to help you decide which advanced composite fabric(s) is best for your application.
120-PLAIN-34x34
281-PLAIN-17x17
285-CROW FOOT-17x17
TO PS
AS4-HS4
F3T282-PLAIN-12.5x12.5
F3C716-PLAIN-16x24
CERAMIC FABRIC
E-GLASS
S-GLASS
BV
XC568-5H5-48X47
7500-PLAIN-16X14
4533-PLAIN-18X18
19
COMPOSITE MATERIALS
HELPFUL HINTS AND PRECAUTIONS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
It is important to have the entire work area including tables, foam, tools and working materials thoroughly warm before commencing. This may take 3-4 hours. An electric hair dryer may be used to warm local areas, being careful not to overheat the part or epoxy. When, due to cool temperatures, a part is slow to wet out, a few quick passes with a hair dryer will greatly speed the layup time. Do not use a hair dryer to heat a cup of epoxy. This can give local hot spots and ruin pot life. The epoxy system components should be stored at room temperature. Never keep resin or hardeners in a cold place, even for long-term storage. If the resin appears to crystallize and settle out it should be returned to its normal state as soon as possible, even if prompt usage is not anticipated. Placing the container of resin in hot (160-190F.) water for several hours will usually decrystallize it and return it to a clear state. Mild agitation will accelerate the process. Leaving the resin hot for 3-5 hours after it clears will reduce its susceptibility to recrystallize. Securely close containers after use. Never attempt any layup below 70F. since the higher viscosity of the resin will make it more difficult to wet out the cloth. Ideal working temperature is 85F. Keep epoxy at 75 to 85F. Never work outside in sunlight. Its acceptable to work in a shop with radiant heaters, as long as: 1.) The heat is diffused and the heat source does not become much hottr than the ambient. 2.) The heat is not provided by a source that generates particulates or aerosol hydrocarbons. Never make a glass layup over a core that is not straight and smooth. The glass panel cannot take the loads if it has bumps or depressions in excess of the allowable values. A wrinkle, depression or bump in a layup which is greater than 1/16 high or low and which is more than 20% of the chord length or 20% of the spar chord is not acceptable and requires repair. A depression can usually be repaired by filling with flox to level and laying over the entire depression the amount of glass that is underneath, lapping outside the depression a distance equal to one inch per ply. Care should be taken not to lay up a depression or bump in the thick main spar caps. The transition of the spar caps into the wing fittings must be smooth and without joggles. These precautions apply only to the flying surfaces. The fuselage and fuel tanks can have relatively large depressions or bumps without affecting structural safety. Care should be taken in the finishing process not to sand through more than one ply on the structure. Joining foam blocks - (1) Paint a coat of epoxy (no micro) on the joining surfaces. (2) Trowel a wedge of dry micro on the center of one surface. (3) Squeeze the joining surfaces together, wiggling them back and forth to obtain a thin micro joint less than 1/16 thick. It is desirable to have the micro about 3/8 low in the joint (not squeezed out). The low joint is filled with micro before glass is laid over the joint allowing a wet bond between the micro and the glass. If some does squeeze out, wipe the joint low with a mixing stick. Do not try to fill large voids with micro, as there is a possibility of exotherm damage. For a void larger than about 0.1, fill with a sliver of foam with micro on each side. A paper cutter is excellent for measuring and cutting the many little squares of glass cloth. Epoxy should be removed from metal tools or parts with acetone, MEK or soap and water before it cures. Micro slurry should not be applied to glass surfaces being bonded. This weakens the joint. Do not use Bondo on styrofoam, It has a polyester base which will dissolve the foam. Bondo will not attack urethane or PVC.
Precaution - Be sure layups are not dry, with air present ( small flecks of white). Inspect thoroughly before leaving a wet layup. A cured layup that is too dry must be rejected. Make sure that ample micro slurry is applied over the foam, particularly the urethane. Inadequate slurry allows air to remain under the first ply, decreasing laminate peel strength and surface durability. Hot wire cutting - A good method to use for judging wire temperatures is the appearance of the cut foam surface. A cratered or rutted surface indicates the wire is too hot. A very light hair of plastic strands on the surface is just right. Always adjust the temperature so that the wire will cut one inch in 4 to 6 seconds with light pressure. Exotherm foam damage - Care must be taken to avoid heavy buildups of epoxy/micro down inside a joint that is insulated by foam, such as the assembly of the wing cores. The gap to be filled by micro when assembling any foam cores should not be thicker than 1/16. In filling a gap greater than 0.1, excessive weight is added and, more importantly, the large mass of epoxy/micro insulated by the foam can exotherm. Heat resulting from the exotherm can be as high as 450F., which will melt away the foam locally and destroy the joint. White is the recommended color for composite aircraft since it absorbs very little of the suns heat (10%) while a black surface will heat up tremendously (95% absorption). Trim colors in noncritical areas are acceptable. Any good quality automotive enamel, lacquer, acrylic or polyurethane is acceptable. A primer-surfacer with an ultra-violet radiation barrier is recommended as an undercoating. Caution: Do not ever wipe paint thinners on any part of the structure. Minute pin holes in the epoxy/glass skin can allow the thinners to penetrate down to the styrofoam,which dissolves in thinners.
QUALITY CONTROL
One of the unique features of the glass-foam-glass composite construction technique is the ability to visually inspect the structure from the outside. The transparency of the glass/epoxy material makes it possible to see all the way through the skins and even through the spar caps. Defects in the layup take four basic forms: (1) resin lean areas, (2) delaminations, (3) wrinkles or bumps in the fibers and (4) damage due to sanding structure away in finishing. Resin lean areas are white in appearance due to incomplete wetting of the glass cloth with epoxy during layup. The presence of minor white (lean) areas up to about 2 inches in diameter is not cause for rejection of the piece. Delaminations in a new layup may be due to small air bubbles trapped between plies during the layup. Small delaminations or bubbles up to 2 diameter may be filled by drilling a small hole into the bubble and filling the void with epoxy. Major wrinkles or bumps along more than 2 of chord are cause for rejection in the wings, canard and winglet on the VE, particularity on the top. In most cases the rejected part can be repaired by following the basic rule: Remove the damaged area and fair back the area at a slope of at least one inch per ply with a sanding block in all directions. Count the number of plies removed while sanding and replace with same, plus one more ply of BID over the entire patch.
WEAVE PATTERNS
The weave pattern describes the manner in which the warp yarns and the filling yarns are interlaced in the fabric. Plain Weave consists of one warp end woven over and under one filling pick. Plain weave is generally characterized by fabric stability with minimum pliability except at low fabric counts. Crowfoot Weaves are constructed with one warp end weaving over three and under one filling pick. It is characterized as being more pliable than either plain or basket weaves, having conformability to complex or compound curved surfaces and making possible the weaving of higher counts than plain or basket weaves.
PLAIN WEAVE
20
COMPOSITE MATERIALS
STANDARD E-GLASS FIBERGLASS CLOTH
Fiberglass cloth is exactly what the name says - glass. Fine fibers are spun from molten glass marbles, gathered into yarn and woven into a strong, supple glass fabric. It can be folded, rolled or draped, like any other loosely woven fabric - but it can be chemically transformed into solid sheets of tremendous strength. All the fiberglass fabrics listed below are volan treated for maximum strength and resistance to moisture and abrasion. They feature a weave that is tight enough for high strength, yet open enough for thorough wetting by resins. 1.45 oz./sq. yd. Lightweight Industrial Cloth used in Osprey and other designs. Widely used by model builders, known as Deck Cloth , Thread Count 60 x 47. #1080 (P/N 1080-50) 50 Width.............. $5.95 yd 5.85 oz./sq. yd. Lightweight Boat or Tooling Cloth. Plain Weave. Thread Count 18 x 18. Breaking Strength 250 x 250 lb./in. Finished Weight 5.64 oz./sq. yd. Thickness .009 as used on KR Aircraft. #7533 (P/N 7533-60) 60 /Width............. $7.75 yd
CM WP ME HA
3.16 oz./sq. yd. Lightweight Industrial Cloth with aerospace applications. Excellent for model building. Only .004 thick. Crowfoot weave, which contours nicely. Thread Count 60 x 58. Breaking Strength 125 x 120 lb./in. Finished Weight 3.08 oz./sq. yd. #120 (P/N 120-38) 38 Width.................. $6.50 yd 3.74 oz./sq. yd. Light weight Boat or Tooling Cloth. Tight plain weave. Thread Count 24 x 22. Breaking Strength. 160 x 135 lb./in. Finished Weight 3.60 oz./sq. yd. Thickness .0055 #1522 (P/N 1522-50) 50 Width.............. $5.75 yd 5.79 oz./sq. yd. Lightweight Boat Cloth. Flat weave, not twisted. Thread Count 18 x 18. Breaking Strength 250 x 225 lb./in. Finished Weight 5.85 oz./sq. yd. Thickness .010. #3733 (P/N 3733-60) 60 Width.............. $6.25 yd
8.5 oz./sq. yd. Lightweight boat or tooling cloth. Threads per inch: 18L x 18W. Used in Osprey aircraft and other homebuilts. #7520 (P/N 7520-50) 50 width .............. $8.75 yd
8.95 oz/yd Medium Weight Standard Industrial Cloth. 8 Harness Satin. Thread Count 57 x 54. Breaking Strength 350 x 330 lb./in. Finished Weight 8.95 oz./yd Thickness .009 mils. Sold by the yard. #7781 50 Width (P/N 7781-50) ............ $8.35 yd #7781 60 Width (P/N 7781-60).............. $9.75 yd 9.66 oz./sq. yd. Heavy Weight Boat or Tooling Cloth. Plain Weave. Thread Count 16 x 14. Breaking Strength 450 x 410 lb./in. Finished Weight 9.40 oz./sq. yd. Thickness .014. #7500 (P/N 7500-60) 60 Width.............. $9.25 yd
AP LG EP CS IN EL AV TO PS BV
S-GLASS
The chemical formulation of S-glass differs from that of standard E-glass. Examples of E-glass are found in the Standard Fiberglass Cloth section of this catalog. S-glass is 30% stronger and 15% stiffer than E-glass and retains these properties up to 1500 F. S-glass is also considerably tougher than an equivalent E-glass. Other styles are available on request. Sold by the yard.
Knitted fabrics are a relatively new format in composites. The performance of the glass is greatly enhanced by removing the interstices of the woven fabric and the crimped condition. E-glass in woven goods normally has 22,000 psi tensile strength. Layered nonwoven goods give 27,000 psi which is about a 20% improvement. Knitted glass offers greater ease of fabric orientation and saves time over multi-layered wet lay-ups. Width 50 Uni-Directional Ply Thickness 17.0 mm Price/yd $10.90
Weight/sq yd 17.6 oz
Weight oz./ ThickPrice Per Width W x F Weave Sq.Yd. ness Lineal Yd. 18 x 4533 4533-60 5.8 60 .009 Plain $16.50 18
01-00650
13.4 oz.
50
.021 mm
$4.50
A unidirectional fabric constructed with Owens-Corning Fiberglass S-2 Glass offering outstanding strength-to-weight ratio, superb glass-resin ratio control to minimize probability of resin-rich and/ or resin-dry areas, handleability without distortion and exceptionally high impact resistance. The integrity of the S-500 is maintained through very fine, adhesive coated fill yarns that are bonded to but not interwoven with the unidirectional fibers of the S-2 Glass. The fill yarns are spaced approximately 1.5 inches apart. The use of short-nap paint rollers is suggested, rolling under pressure, always parallel to the fibers. Use with epoxies, vinyl esters and polyesters. Weight of fabric - 0.56 Lbs. per Sq. Yd. Tensile Strength (hand layup in polyester, air cured) 128,000 PSI. Thickness .016. Sold by the foot. 11 Wide............. P/N 01-00336............ $3.25 Ft
AHN 7800 is an Commercial Grade Nomex honeycomb particularly suited for use where resistance to corrosive attack and moisture are important. This material exhibits good strength characteristics and is fire resistant. It is available in a variety of cell sizes and densities to suit most purposes. Typical applications include lightweight non-structural bulkheads for ships, joiner panels, shelters, antennas, and auto body panels. This material is not intended for aircraft or aerospace applications. This material also exhibits good thermal insulation properties and also has good dielectric properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding. Description Part No. 01-00487 01-00489 01-01052 01-01181 Price $189.95 $94.50 $289.50 $98.00
NOMEX HONEYCOMB
100% Fiberglass in a non-woven state. It is used for bulk build-up in molding and fabricating components. Also useful for filling holes and badly damaged parts. 1.5 Oz. Weight. 38 Width. P/N 01-06500 ...............$2.98/Yd
GLASS MAT
Honeycomb 1/8 Thick, 1/8 Cell 4 x 8 Honeycomb 1/8 Thick, 1/8 Cell 4 x 4 Honeycomb 1/4 Thick, 1/8 Cell Honeycomb 7/16 Thick, 4 x 8
21
COMPOSITE MATERIALS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
STYLE 120 STYLE 281 STYLE 285
The most basic structural material in building a composite aircraft is glass cloth. The use of glass in aircraft structures, particularly structural sandwich composites, is a recent development. Glass cloth is available commercially in hundreds of different weights, weaves, strengths and working properties. Very few of these, however, are compatible with aircraft requirements for high strength and light weight. Even fewer are suitable for the hand-layup techniques developed by Burt Rutan for the homebuilder. The glass cloth featured here has been specifically selected for the optimum combination of workability, strength and weight. Two types of glass cloth, a bi-directional cloth (RA7725BID) and a uni-directional cloth(RA7715 UND) are used. BID cloth has half of the fibers woven parallel to the selvage edge of the cloth and the other half at right angles to the selvage, giving the cloth the same strength in both directions. UND cloth has 95% of the glass fibers woven parallel to the selvage, giving exceptional strength in that direction and very little at right angles to it. BID is generally used for pieces which are cut at a 45 angle to the selvage, a bias cut, which enables the builder to lay BID into contours with very little effort and provides the needed shear and torsion stiffness for flying surfaces. UND is used in areas where the primary loads are in one direction, such as wing skins and spar caps. Multiple layers of glass cloth are laminated together to form the aircraft structure. Each layer of cloth is called a ply. UNIDIRECTIONAL P/N RA7715 7 Oz. 38 Width Threads per inch: 80L x 18W $8.25 Lineal Yd.
Selvage Edge
Selvage Edge
BIDIRECTIONAL P/N RA7725 8.8 Oz. 38 Width Threads/inch: 54L x 48W $6.90 Lineal Yd.
Quantity Discount: 15% on 500 Yds or more. Yardage must be on one fabric for discount, not combined. Discount on larger quantities quoted on request
Kevlar 49 aramid fiber was introduced commercially in 1972 and is the Du Pont registered trademark for its new high strength, high modulus organic fiber. It combines high tensile strength (43,000 PSI) and high modulus (19 million PSI) with light weight and toughness superior to other reinforcing fibers for plastics. It is available in yarns and rovings which meet all FAA requirements for flammability. It shows no degradation in jet fuel, lubricating oils, water, salt water or high humidity. At cryogenic temperatures (-320F.) performance is excellent with essentially no embrittlement or degradation of fiber properties. Kevlar 49 can offer both a significant weight saving and improved stiffness versus glass in addition to superior vibration damping and good impact resistance. A kayak made with Kevlar 49, for example, weighs about 18 pounds while the weight of a comparable boat made with glass would be over 30 pounds. The advantages over glass in small aircraft are similar - weight savings and improved impact resistance. Kevlar 49 is used in a number of parts on the Lockheed L-1011 because of weight savings of up to 30% compared to similar parts made of glass. One unusual benefit of Kevlar is its quietness. A cowling made of Kevlar will be quieter and less sensitive to engine vibrations than its glass or graphite counterpart. Although all of the processes used in combining resins with glass fiber are adaptable to Kevlar 49 with little or no modification. The vinyl estertype system is compatible, but the use of polyesters is not recommended because of poor bonding with Kevlar. The epoxy resin systems featured in this catalog are compatible with Kevlar 49 and have good wetting characteristics. Kevlar 49 is stocked in three different fabric styles. Kevlar #120 is a very lightweight fabric, while #281 and #285 are identical except for the weaving pattern. Other weights and weaves of Kevlar are available on a special order basis. Be sure to specify the Kevlar style when ordering. Breaking Strength Lbs/Inch Oz./ Weight Width Thickness W x F Weave Price Per Lineal Yd Style Part No. Sq.Yd Warp Fill 120 01-38100 1.8 38 .0035 34 x 34 Plain 260 250 $25.75 281 281-38 5.0 38 .010 17 x 17 Plain 625 650 $23.75 285 285-38 5.0 38 .010 17 x 17 Crow 630 650 $23.65 Quantity Discount: 10% on 25-50 Yds. %; 15% on 50-100 Yds.; 20% on over 100 Yds. ARAMID FABRIC - Aramid Fabric (Twaron, Style 285): 38, 5 ounces. Equivalent to 285 Kevlar Fabric. Sold by the yard. P/N 01-01159 ...............................................$13.95 KS-400 is a unique unidirectional reinforcing material combining the benefits of Kevlar 49 with Owens-Corning Fiberglass S-2 Glass. Designed for use in laminates which must have high modulus or stiffness and tensile strength combined with low weight or density. Specifically constructed to enhance properties of wet-out behavior, bondability and impact strength in a hand laid-up composite. As compared with woven fabrics of pure Kevlar, KS-400 should produce laminates with better fiber-resin ratios and superior stiffness. The integrity of KS-400 is maintained through very fine, adhesive coated Dacron fill yarns that are bonded to, but not interwoven with, the unidirectional fibers. Only vinyl esters or epoxies should be used as impregnating resins. The presence of the S-2 Glass enables the fabricator to determine visually when the material is properly wet out. Resin bond is far superior to the glass than to the Kevlar. This means increased resistance to delamination. Also the presence of the S-2 Glass even in such a relatively small amount increases the impact strength of the laminate significantly. In application, it is important that the fabricator does not confuse the appearance of the cross-direction adhesive binder with air bubbles. The impregnating resin will soften this adhesive and it will flow slightly. The adhesive shows up as milky areas on both sides of the fabric within the finished laminate. A gel coat or paint covers these areas effectively. 12 Wide ............. P/N 01-00340 ...............$4.55 Ft . 10% Discount on 50 ft. (4 lbs) 20% Discount on full roll, 300 ft. (24 lbs) Straight-edge blades easily slide through the fabric and are sharpened to the tip for smaller or appliqu cuts. Grabs the fabric and cuts cleanly, with no material folding over the blades - even when cutting left-handed. Blades fully extend into the handles for durability and better cutting stability and pressure distribution. Exceptional accuracy and retains smooth blade movement, even in heavy-use environments. Straight blades made of stainless steel (Blades are not serrated). Good for cutting stitchwork, thread, cloth, leather, fabrics, films, sign and graphics material, vehicle wraps, and more.................................. P/N 01-01186 ...................$18.95 Although Kevlar has many advantages over conventional fiberglass weaves, it is very difficult to cut. Special scissors have been developed to facilitate cutting. These scissors have a wear resistant coating which is metallurgically bonded to the steel substrate. The coating will not chip or peel off and can be sharpened. Model WR-10E-4 Shears. P/N 01-00341 .........................................$72.50
UNIDIRECTIONAL KEVLAR
PRECISION SCISSORS
Wiss No. 20W heavy-duty shears, ideal for cutting fiberglass cloth and all fabrics. Hot drop-forged steel. Right Hand Shears............P/N 01-00397 .......... $32.95 Left Hand Shears ..............P/N 01-00398 .......... $32.50
FEATHERWEIGHT SCISSORS - Lightweight, durable, and reliable GINGHER Scissors are lightweight, extremely sharp and comfortable. These 2-1/2 oz. scissors are perfect for use during the lay-up for a variety of purposes and can be soaked in acetone for easy clean up. We recommend saving one pair for only cutting Kevlar and keeping a second pair for general use. P/N 01-00342 .............$44.65
22
CARBON GRAPHITE
BIDIRECTIONAL WOVEN CARBON GRAPHITE
Construction is such that the fibers are oriented in a straight or linear manner with no twist and are able to be maintained in that condition while being impregnated by hand. The fabric is formed from rovings or tows of fibers similar to that used in making woven fabric. These fibers are locked into position by very fine fill (or cross machine direction) fibers which are encapsulated with an adhesive which is compatible with common impregnating resins. These fill fibers and the encapsulating adhesive will be visible in any clear resin. The resulting pattern is normal and should not be interpreted as poor wet-out of the reinforcing fibers. For hand lay-ups, resin may be applied by spray, brush or by pouring action. A short napped paint roller is recommended for spreading the resin. Excess resin should always be rolled out in a direction parallel to the graphite fibers. The final or external layer should be applied with the fill yarns facing down (unexposed). Satisfactory for use with epoxies, polyesters, vinyl esters and other resins. The fabric is rolled with a polyethylene interliner to maintain cleanliness. Care and cleanliness should be practiced when working with Graphite materials. Unattached graphite fibers are easily airborne. A filter mask should be worn when cutting and fabricating. Itching & irritation caused by broken filaments becoming imbedded in the skin can result from filament breakage during handling. This graphite fabric is similar to the bidirectional woven graphite described above but is a unidirectional weave using standard 3000 tow graphite warp and 75-1/0 fiberglass fill .
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
282 584 Woven graphite is a fabric introduced in recent years which has become an excellent alternative to fiberglass and Kevlar - only mils thick with great strength. In addition to its great strength, graphite fabric also has very low density and is very stiff. Although it is quite costly, the material saving is appreciable since only one course of graphite is required for 3 or 4 of fiberglass. It cuts considerably easier than Kevlar. Graphite The excellent qualities of the graphite fabric itself give it an immediate waiting market in the aircraft building field. Graphite fabric is stocked in the three different styles shown below. Other weights and weaves of graphite are available on a special order basis. Be sure to specify the graphite style when ordering. These carbon graphite cloths are not pre-preg fabrics. * Warning folding for shipment can damage the filaments in the fabric. Folding will be done at customers risk and request only. CARBON FIBER Weight ThickBreaking Price Style Part No. Oz./Sq Width W x F Weave ness Strength /yd. Yd. 282 01-00970 5.8 39 .007 12.5x12.5 Plain 300 300 $45.50 282 01-00971 5.8 50 .007 12.5x12.5 Plain 300 300 $31.65 282 01-28260 5.8 60 .007 12.5x12.5 Plain 300 300 $36.25 TWILL 2 X 2 WEAVE Weight ThickBreaking Price Style Part No. Oz./Sq Width W x F Weave ness Strength /yd. Yd. 284 01-00602 5.7 50" .007 12X12 2/2 n/a n/a $31.65 Twill 8HS WEAVE Weight BreakThickPrice Style Part No. Oz./Sq W W x F Weave ing ness /yd. Yd. Strength 584* 01-00626 11 42 .013 24x24 8HS 650 650 $66.00 584** 584-42 11 42 .013 24x24 8HS 650 650 $66.50 * Fiberglass tracers, which are clear when wet out. ** Fiberglass tracers, which are yellow when wet out.
Tensile Strength 54,000 PSI/in. width Weight 0.033 Lb./Sq.Ft. Thickness 0.012 Laminated 5 Wide ................................. P/N 01-06200 ..................... $1.78 /Foot 25% Discount on full roll of 250 ft. 12 Wide ............................... P/N 01-06300 ..................... $3.85 /Foot 15% Discount on 12W x 50 Roll & 25% Discount on 12W x 300 Roll
Tapes are woven from 8.7 oz./sq. yd. fiberglass cloth, .012 thick, into narrow widths with non-raveling selvage. Perfect for glassing seams, corners, edges fan for repair jobs. Sold in 50 yd. rolls. 1 Width 26 Warp, 17 Fill ................ P/N 01-06610.............. Roll $13.75 1-1/2 Width 32 Warp, 17 Fill .......... P/N 01-06615.............. Roll $17.25 2 Width 40 Warp, 17 Fill ................ P/N 01-06600.............. Roll $22.50 3 Width 58 Warp, 17 Fill ................ P/N 01-06700.............. Roll $28.50 4 Width 76 Warp, 17 Fill ................ P/N 01-06705.............. Roll $29.90 6 Width 106 Warp, 17 Fill .............. P/N 01-06710.............. Roll $54.65 12 Width 218 Warp, 17 Fill ............ P/N 01-06720............ Roll $105.95
These carbon fiber tapes are used to add stiffness and tensile strength in one direction without adding significant thickness or weight. These West System tapes have 12 carbon fiber bundles per inch of tape width. The bundles are held together with a polyester fill thread making the tape easy to handle. These tapes are compatible with epoxies but not with vinlyester or polyester resins. #702 tape is 1.5 wide and #703 tape is 3 wide. Style No. Width (in.) 702 1.5 702 1.5 703 3 703 3 Length 12 ft.roll 50 ft.roll 12 ft.roll 50 ft.roll Part No. 01-00238 01-00239 01-00240 01-00241 Price/.roll $55.30 $145.80 $70.75 $190.75
This is a fibrous glass reinforcement designed to furnish exceptionally high directional strength. Manufactured from parallel strands of glass roving which are held together by a fine woven cross thread. The placement of the cross thread is such that the parallel rovings do not wander or have a tendency to cross over each other. This 100% unidirectional tape can be used instead of unidirectional fabric for spar caps, wings and elevators. Contours well and cuts building time considerably. Wt. 22 oz./sq. yd., 0.025 thick. May be used with either polyester or epoxy systems. Used on Polliwagen. Long-EZ, Cozy. Adventure and applicable to all composites. 3 Wide .................. P/N 01-06800...................$1.75 Yd.
Aircraft Spruce offers structural tubing and structural torsion tubing, engineered and built to meet your exact specifications and tolerances. Structural Tortion Tubing, in continuous lengths up to 40, is manufactured with the computer-controlled, fully-automated Helical Winding Process. We offer a broad array of Fiber Options and tubing wall thickness and diameter is determined on a case-bycase basis to suit your application. Special Order Sold in 10 ft. lengths only (can cut for UPS shipment). * The image shows two types of finish on this product. The standing tube is sanded and painted with a gloss finish. This is available for an additional cost of $249.00. The tube lying on its side is a rough surface, which will be received when product is purchased.
D of Tube 0.5 0.75 1.00 1.25 1.5 1.75 2 2.5 3 Wall Thickness .100 .100 .120 .120 .120 .120 .120 .120 .120 Length 10 10 10 10 10 10 10 10 10 Part No. 03-00171 03-00172 03-00173 03-00174 03-00175 03-00176 03-00177 03-00178 03-00179 Price $428.95 $428.95 $357.95 $515.00 $414.95 $565.00 $464.95 $572.00 $689.99
23
1307 Low Viscosity Resin / 3102 Fast Hardener - 100% solids 2-component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, 4:1 weight or volumetric mixing, safe, fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40F. No solvents or VOCs. Nonhazardous, non-corrosive hardener. 3176 30-minute Medium R/T Epoxy Hardener - Fast setting, even in thin films. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio. High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat. Low Viscosity Laminating Resin 1307 LV, Pail (40 lbs) ......................... P/N 01-07917 ......$324.00 1307 LV, Gallon (8 lbs) ...................... P/N 01-07914 ........$64.75
It appears that the 6K tow will prove most practical for homebuilding applications. This size will be available in the small units shown. The 3K and 12K sizes are offered in full spools only. The 3K tow is used primarily by weavers. The 12K is difficult to wet out but can be done by diligent brushing.
This is the S-Glass Strand (roving) used by Rutan Aircraft Factory on the Defiant homebuilt kits. Also applicable to other homebuilt aircraft applications. Defiant requires four 15lb. rolls of S-Glass Strand. One 15 Lb. Roll P/N 01-06400 ......... $286.00
Fast Hardener 3102, Pail (40 lbs) .......................... P/N 3102, Gallon (8 lbs)........................ P/N 3102, Quart (2 lbs) ......................... P/N Medium Hardener 3176, Pail (40 lbs) .......................... P/N 3176, Gallon (8 lbs)........................ P/N 3176, Quart (2 lbs) ......................... P/N KITS - Jeffco Epoxy, 1 gal. kit, fast ........... P/N Jeffco Epoxy, 5 gal. kit, fast ........... P/N Jeffco Epoxy, 1 gal. kit, medium .... P/N Jeffco Epoxy, 5 gal. kit, medium .... P/N
01-07920 ...$358.95 01-07918 .....$76.75 01-07915 .....$22.50 01-07921 ...$359.95 01-07922 .....$79.85 01-07923 .....$22.50 01-07916 .....$87.50 01-07919 ...$424.00 01-07924 .....$87.50 01-07925 ...$368.95
KEVLAR 49 ROVING
Lightweight, micro ballooned filled, fast curing 2-part epoxy fairing putty with excellent moisture resistance. Use on both fiberglass and wood epoxy structures above or below the waterline. At 70 F it is sufficiently cured to be hand sanded in 3 hours or machine sanded in 4 hours. This allows you to apply 3 coats in a standard 8 hour shift or 6 in a round the clock basis. Complete a fairing or filleting job in a day rather than 3 or 4 days. NOTE: QuikFairs warm butter-like consistency makes it easy to measure by weight. Use care when measuring by volume as QuikFair does not self-level and may trap air pockets. As QuikFair is fast curing the working time is short. Mix no more than can be applied within 10 minutes. 24 oz. Kit ..........P/N 01-00404 ........ $27.80 1-1/2 qt. Kit .......P/N 01-00405 ........ $42.65
Aeropoxy Light, a modification of the ES6279 adhesive system, is a 2-component paste epoxy patching and filler compound for foam, wood, fiberglass and other surfaces. The mixed consistency of this system is very smooth and creamy, so it spreads easily, and can be spliced to a feather edge without separation. It is a thixotropic, non-sag material that will remain in place in thick sections, even when applied upside down! The resin and hardener of this system are color coded for easy mixing. The resin is white and the hardener is brown, giving a good visual indication of complete mixing with a uniform tan color free of streaks. AEROPOXY LIGHT has special low density fillers incorporated into it that provide very distinct benefits. It is a very light material (4 pounds per gallon), and therefore contributes minimal added weight to the filled or repaired structure. Also, the cured material is very easy to sand, making the finished patch undetectable when covered or painted. There are no volatile ingredients in AEROPOXY LIGHT, so the cured material will not outgas, which could cause a loss of adhesion of paint or coverings. Sold in kits of part A & B. 1-1/2 lb. Kit .....................P/N 02-30006 .............. $34.50 6 lb. Kit ...........................P/N 02-30007 ............ $109.75
These Premium Pigments are a paste to tint polyester, vinyl ester, epoxy resin, and polyurethane. Add about 6% to 8% of pigment by weight or 1/2 pint of pigment per gal. of resin. White - 1 oz. ......P/N 01-45308 .......... $4.45 White - 8 oz. ......P/N 01-45501 ........ $20.50 Black - 1 oz. ......P/N 01-45319 .......... $4.50 Black - 8 oz. ......P/N 01-45512 ........ $20.25
DLRH-3212 is an unfilled, clean epoxy resin system with a long pot life. DLRH-3212 is a tough, strong, impact resistant resin with chemical resistance. It has excellent wetting quality on kevlar, carbon graphite and fiberglass cloth. Used extensively in construction of aircraft, race cars, motorcycles, helmets and sports equipment. Mixing Ratio by Wt: 100:30; Pot Life (200 Gm MASS) 60 Min; Tensile Strength @ 25 C 12,500; Flexural Modulus @ 25 C 40,900; Heat Deflection 325 F; Thermal Shock 72F125F; Shore D: 80, Density: Resin: 9.7, Hardener: 7.9, Mixed: 9.1; Shelf Life: Resin/ Hardener 1 Year. Qt Kit ............................ P/N 01-00430............. $54.50 Gal Kit ........................... P/N 01-00431........... $154.75 5 Gal Kit ........................ P/N 01-00432........... $738.00
24
POLY EPOXY
E-Z POXY
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Rheology: Mixing Ratio:3 parts Resin to 1 part Converter by Weight 10 parts Resin to 4 parts Converter by Volume Kinetics: Pot Life, 100 grams .............. 105 mins 1 quart ......................75 mins Mold Open Time .......................3-4 hrs Tack Free Time ......... 5-6 hrs
ALPHA POXY
AlphaPoxy Hardener, 3/8 gallon ........ P/N 01-07908 ................... $28.50 AlphaPoxy Resin, 5 gal. pail .............. P/N 01-07913 ................. $239.00 Rheology: Mixing Ratio: 2 parts Resin to 1 part Hardener by Weight
These polyester gel coats P/N Price Color Size can be used as the surface Color Size Pint 09-01668 $20.85 Pint of new fiberglass parts layed Dark up in molds or used in the Black Quart 09-01666 $31.75 Blue Quart Gallon 09-01667 $62.75 Gallon repair of gel coat surfaces on fiberglass parts. On surface Pint 09-01669 $19.95 Pint repairs, the gel coat must be White Quart 09-01664 $34.50 Red Quart sealed to fully cure. PVA can Gallon 09-01665 $68.50 Gallon be used to seal the gel coat.
25
POLYESTER RESINS
MGS epoxy resins are approved for the production of certificated aircraft parts. The 335 and 285 systems are especially suited for homebuilders because of their long shelf lives, excellent workability, physiological friendliness, adjustable cure rates and excellent static and dynamic strength characteristics. The 285 system is available with fast and slow hardeners which can be blended with each other in any proportion to provide the desired working life and cure cycle. Pot lives and working times can be adjusted from fifteen minutes, using the fast hardeners, to six hours, when the slow hardeners are employed. Once the hardeners have been blended, the specified resin to hardener mixing ratio must be maintained. The 335 System is available only with fast hardener. Components of the 335 system should not be mixed with those of the 285 system. With both systems, if only the slowest hardener is used, the cure times should be extended to a few days, otherwise some brittleness may be noted. While room temperature curing results in good properties when the faster hardener combinations are used, some curing at elevated temperatures or post curing will result in the highest achievable strength and Tg, with the slower blends. Even unfavorable low temperature and high humidity conditions in the work environment will not effect the quality of the product and high gloss, uncontaminated, tack free surfaces are achievable every time. The resins do not contain any unreactive dilutants which with many systems result in de-gassing and bubbling of the painted finish. The MGS resins do NOT contain aromatic amines. While proper processing practices should be maintained, the physiological friendliness of these systems have been demonstrated by many years of production experience. The 285 system has slightly higher physicals than the 335 and will also achieve a higher maximum Tg after post curing. While the 335 is more viscous than the 285, after mixing with the appropriate hardeners, their viscosities are comparable. MGS systems are used in the construction of the Cozy, Diamond, Cirrus and other aircraft.
System 285 (Max. Tg 105 C - 110 C; 195 F - 230 F) Mixing ratio Resin:Hdnr Pot life Mixed Viscosity@20C 100:50 by volume H285-F 40 min 300-500 cp 100:40 by weight H287-S 4 hours H285 : H287 40 : 60 2 hours
System 285 Prices L285 Resin (1 Gal.) ............................ P/N 01-41000 ...$137.95 H285F Hardener (.25 gal/1 qt.) .......... P/N 01-41005 ......$32.75 H287S Hardener (.25 gal/1 qt.)*......... P/N 01-41006 ......$38.50
*Important Shipping Information- H287S Hardener can be shipped UPS ground only. A $25 hazardous fee, and a $45 box fee applies (per quart). Can also be shipped truck collect.
System 335 (Max. Tg 75 C - 80 C; 160 F - 180 F) Mixing ratio Resin:Hdnr Pot life Mixed Viscosity@20C 100:45 by volume H335-F 15 min 800 cp 100:38 by weight H340-S 6 hours 400 cp H335 : H340 50 : 50 1.5 hours 20 : 80 4 hours
System 335 Prices L335 Resin (Gal.) ............................... P/N 01-41100 ......$96.75 H335F Hardener (.225 gal/0.9 qt.) ..... P/N 01-41105 ......$32.50 H340S Hardener (Slow) ..................... P/N 01-41106 ......$31.75 Two units of hardener are required for each gallon of resin Typical room-temperature properties of clear VINYL ESTER RESIN castings made with DERAKANE 411 resins Dow Chemicals Derakane 411-350 PA Vinyl Ester Resin is an epoxy-based Vinyl ester designed to provide superior toughness and high corrosion resistance. Property DERAKANE 411-350PA Many leading kit aircraft manufacturers use vinyl ester resins extensively due Tensile Strength, psi 11-12,000 to its quality and ease of fabrication. We furnish medium promoted vinyl Tensile Modulus, units 105 psi 4.9 ester 411-350 PA resin which includes CONAP, DMA the resin is cured by Elongation, % 5-6 adding the MEKP which is furnished with the kit. Gel times vary according (DERAKANE 411-350) (7-8) to the amount of MEKP added and the ambient temperature. Shelf life of Flexural Strength, psi 16-18,000 promoted vinyl ester resin is short at only a few months. Flexural Modulus, units 105 psi 4.5 MEDIUM PROMOTED: Includes CONAP, DMA and other additives. Add Compressive Strength, psi 16-17,000 MEKP for complete cure: Quart ............... P/N 01-01076 ....... $37.50 Compressive Modulus, units 105 psi 3.5 Gallon .............. P/N 01-07350 ....... $69.75 Compressive Deformation at Yield, % 6.5-7.8 MEKP Clear Catalyst 1oz. .................................P/N 01-01110 ......................... $2.45 Specific Gravity 1.12 MEKP NORAC Catalyst Only (4 oz.) ...........................P/N 01-07325 ......................... $5.50 Heat Distortion Temp.,F 210-220 Vinyl Ester Resin 411-350PA - Quart Kit.. ...................P/N 01-01109 ....................... $34.25 Barcol Hardness 35 Vinyl Ester 1-Gal. Kit (Resin & Catalyst) ......................P/N 01-07355 ....................... $75.25
(20 -30 minute pot life at 2% mix ratio) Catalyst Concentration 1/2% 3/4% 1% 1-1/2% 2% 2 oz. 9 drops 14 drops 18 drops 27 drops 36 drops Resin Quantity - 30 drops = 1 cc 4 oz. 8 oz. 12 oz. 18 drops 36 drops 1.8 cc 27 drops 2 cc 3 cc 36 drops 2.5 cc 3.75 cc 2 cc 4 cc 6 cc 2.5 cc 5 cc 7.5 cc 16 oz. 2.5 cc 4 cc 5 cc 8 cc 10 cc
26
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
WEST SYSTEM brand resins and hardeners, form a two-part epoxy system developed by Gougeon Brothers specifically for wood and composite boat construction. Rutan Aircraft Factory now recommends WEST SYSTEM epoxy for certain homebuilt aircraft applications, particularly where a moisture resistant epoxy is desired. 105 Resin is the base material on which all of the WEST SYSTEM epoxy systems are built. The resin is a clear, light amber, low-viscosity liquid. It is designed specifically to wet out wood fiber. With roller applications, it possesses excellent thin film characteristics in flowing out and is self-leveling without fish-eyeing. Its relatively high flash point makes it safer to work with than polyesters. It can be cured in a wide temperature range, then sanded and shaped. It cures quite clear so that the natural finish shines through. 205 Fast Hardener, when mixed with the 105 Resin in a ratio of 5 parts Resin to 1 part Hardener, yields a high-strength, rigid solid with excellent cohesive properties and provides an excellent moisture vapor barrier. The 105 Resin/205 Fast Hardener has a pot life of 10-15 minutes at 70F. It is also recommended in coating applications where natural finishing is desired. Partial cure time at 70F is 5-7 hours. 206 Slow Hardener is a low-viscosity mixture of polyamines. The 105 Resin/206 Slow Hardener has a pot life of 30-40 minutes at 70F. It is normally used when extended time is needed for large coating and bonding applications. It is especially well suited to working in warmer climates. Partial cure time is 9 hours at 70F.
WEST COMPONENTS
Fast Hardener Part No. Price 01-00356 $20.10 7 Oz -----01-00357 $44.29 27 Oz -----01-00358 $153.17 121 Oz -----Slow Hardener Part No. Price 01-00359 $20.10 7 Oz ----01-00360 $44.29 27 Oz -----01-00361 $153.17 121Oz ------
This hardener is used where a very clear, moisture resistant natural wood finish is needed. Can be used to laminate veneers where joints will be subjected to sunlight. Improves sun resistance. Pot life: 20 min., cure solid in 9-12 hours, and maximum strength within 7 days. .66 pint .........................P/N 207-SA ..................... $38.15 .33 gal. .........................P/N 207-SB ..................... $81.52 1.45 gal. ...................... P/N 207-SC ................... $278.95 This hardener is used for bonding applications in warm or humid weather or when extended working time is needed. Provides twice the working time as 206 hardener. Forms a clear, amber solid when cured. Pot life is 40 minutes, solid state in 24 hours, and maximum strength in 5-9 days. .66 pint ....................... P/N 01-00362 .................... $33.55 .33 gallon ................... P/N 01-00364 .................... $75.17 1.45 gal. ..................... P/N 01-00363 .................. $242.51
West System User Manual .......................... P/N 01-08750 ........FREE West System 101 Handy Repair Pack - Contains 105 resin & 205 hardener plus accessories needed for small repairs P/N 01-08760 ........ $9.75 West System #101-6 Maxi Repair Kit - incl. materials to make 6 individual repairs using 105 resin and 205 hardener. P/N 01-08770 ...... $34.01 West System 501 White Pigment - use this epoxy based pigment to provide a neutral white base for the final coloring system. Mix at ratio of 1 teaspoon to 8 oz. of epoxy. 8 oz. can. ....... P/N 01-08775 ...... $16.49 West System 410 Microlight an excellent filler which provides easy workability for a variety of applications. Easy to sand and cures to a neutral tan color. 1.7 oz., 01-08780 .............. $15.69 4.3 oz., 01-08785 ................ $31.10
Mixing: 125 Resin: 229 Hardener - By weight, 100:30 & By volume, 100:35. Pot life: 6583 min, 7277 min, 8527 min. For PROFESSIONAL use only. Physical Property Compression Yield (psi) Tensile Strength (psi) Annular Shear Fatigue(lb)@100,000 cycles Test Method ASTM-D-695 ASTM-D-638 GBI Method Room Temp (2 wks.) 14,500 7,550 11,641
423 Graphite Powder can be mixed with WEST SYSTEM epoxy to produce a low friction coating with increased scuff resistance and durability. 423 is often used as a bearing surface, and as a coating on the bottoms of racing craft that are dry sailed. P/N 09-00315 ...........$17.93
GAL.#125 Resin ........................... P/N 125-0............................ $119.50 GAL.#229 Hardener ..................... P/N 229-0.............................. $73.50
Using Mini Pumps helps ensure accurate metering of resin/hardener mixture. Pumps mount directly on resin and hardener containers. One stroke from each pump delivers proper ratio of resin to hardener. Kit consists of 3 pumps for A, B, and C epoxy kits. P/N 01-00318.............$14.52
27
FOAM
CM WP ME HA AP LG EP
CAUTION
STYROFOAM FB Low density (2 lb./ft3). Tight closed cell structure leaves no voids between the cells. The result is high compressive strength and unequaled resistance to water penetration. Has excellent resistance to bases, salts, alcohols and most acids but not to petroleum based solvents. Cuts smoothly with a hot wire for airfoil shapes. Foam Type Density Thickness Sheet Size Part No. Price/Sheet 3 Styrofoam (Blue) 2 Lb/Ft 5/8 24 x 48 01-09400 $8.25 Small Cell 5/8 24 x 96 01-09500 $17.25 3/4 24 x 96 01-09600 $21.25 1 24 x 48 01-09700 $13.75 1 24 x 96 01-09800 $27.50 1-1/2 24 x 96 01-09900 $42.25 2 24 x 48 01-10000 $28.25 2 24 x 96 01-10100 $57.25 4 24 x 48 01-10200 $57.50 POLYSTYRENE LARGE CELL This blue large cell expanded foam is 2 lb. density and cuts easily using a hot wire to airfoil shapes. Compatible with most adhesives, but should be used only with epoxies, not polyester resins. Will dissolve in fuels and solvents. Foam Type Styrofoam FB (Blue) Large Cell Density Thickness 8 8 8 8 8 10 Sheet Size 16 x 4 16 x 25 16 x 42 16 x 67 16 x 109 20 x 96 Part No. 01-37600 01-01166 01-10600 01-10800 01-10900 01-11100 Price/Sheet $7.90 $44.50 $77.85 $119.95 $195.95 $210.95
2 Lb/Ft
URETHANE This foam is easily contoured using a large knife, and then sands well to final form. Excellent for producing the fuselage, wing tips, and other curved parts. It is fuel resistant and can be used for fuel cells. Compatible with most adhesives. Do not hot wire polyurethane foam. Color: tan or green. Foam Type Urethane (Tan or Green) Density 3 2 Lb/Ft Thickness 1/2 1/2 3/4 3/4 1 1 1 2 2 2 Sheet Size 24 x 48 48 x 48 24 x 48 24 x 96 24 x 48 24 x 96 48 x 96 24 x 48 24 x 96 48 x 96 Part No. 01-11300 01-11400 01-12150 01-12160 01-11500 01-11600 01-11700 01-11900 01-12000 01-12100 Price/Sheet $10.50 $19.50 $13.95 $29.85 $18.65 $33.75 $59.90 $37.75 $69.75 $117.95
POLYURETHANE FOAM
CS IN EL
CAUTION
AV TO PS BV
DIVINYCELL A closed cell medium to high density foam which has high compression strength, durability, and excellent fire resistance. Can be vacuum formed to compound shapes and can be bent using heat. Compatible with polyester, vinylester, and epoxy resins. Foam Type Density Thickness Sheet Size Part No. Price/Sheet 1/8 32 x 48 01-00158 $15.80 3 Divinycell PVC 3 Lb/Ft 1/4 32 x 48 01-12300 $21.75 (Blue) Type H45 3/8 32 x 48 01-12400 $27.75 5/8 24 x 47 01-12500 $43.50 3/4 15 x 26 01-12600 $12.75 3/4 32 x 48 01-12700 $55.50 1 32 x 48 01-12800 $86.65 1-3/4 32 x 48 01-12900 $96.25 Eracer 2 48 x 96 01-12920 $348.50 Eracer 2 24 x 48 01-12910 $68.75 Eracer 3 48 x 96 01-12940 $487.50 Eracer 3 24 x 48 01-12930 $123.95 3 1/4 37 x 37.5 01-13000 $46.85 Divinycell PVC 6 Lb/Ft (Tan) Type H100 1 6 x 10 01-13100 $9.65 1 10 x 12 01-13200 $18.75 3 1/4 24.8 x 27.75 01-13300 $155.95 Divinycell PVC 15.6 Lb./Ft LAST-A-FOAM Rigid, Polyether Polyurethane foam with fine closed-cell structure, light cream-yellow color. LAST-AFOAM is wonderfully versatile for sandwich-core applications. It cuts and shapes easily with common woodworking tools, and bonds to itself and other materials with most epoxy, polyester, or urethane-type adhesives. LAST-A-FOAM is unaffected by water, fuels and most solvents, and paint finishes are easily applied. It is frequently used in regular molds after the gel-coat and first two layers of glass are installed; the LAST-A-FOAM is added and another layer of glass applied for a strong, light-weight sandwich. Foam Type Last-A-Foam Urethane/Polyester (Yellow) 275 F Density 4.5 Lb/Cu. Ft. Thickness 10mm 1/4 1/4 3/8 1/2 3/4 1/4 3/8 3/4 1 0.200 1/4 Sheet Size 24 x 96 24 x 48 24 x 96 24 x 96 24 x 96 24 x 96 24 x 48 24 x 48 24 x 48 16 x 24 12 x 48 12 x 48 Part No. 01-13400 01-13550 01-13500 01-13600 01-13700 01-14000 01-14100 01-14200 01-14250 01-01048 01-14400 01-14500 Price/Sheet $52.50 $16.75 $36.90 $44.75 $55.50 $76.25 $20.85 $28.75 $50.00 $32.75 $32.85 $34.50
DIVINYCELL FOAM
LAST-A-FOAM
CAUTION
DO NOT USE HOT WIRE!
Last-A-Foam Urethane/Polyester (Yellow) 275 F Last-A-Foam Urethane/Polyester (Yellow) 275F Last-A-Foam Urethane/Polyester (Yellow) 275 F 6Lb/Cu. Ft. 8 Lb/Cu. Ft. 18 Lb/Cu. Ft.
28
All designers highly recommend that builders who are considering a composite project purchase this practice kit. It contains the excellent 26 page 11 x 17 manual by Burt Rutan entitled MOLDLESS COMPOSITE SANDWICH HOMEBUILT/ AIRCRAFT CONSTRUCTION ($14.50) plus the assorted foams, epoxy, fiberglass, filler materials and supplies with which to work. Everything needed to practice the technique of composite building before venturing into a complete aircraft project. Practice Kit with Manual ........................... P/N 01-15000.............$99.00 Practice Kit without Manual ...................... P/N 01-15100.............$89.00 International Practice Kit with Manual ...... P/N 01-15050.............$57.00 Same as Practice kit with the manual, but excludes the epoxy for International shipping. Backsaver foam is temperature sensitive, softening when it comes in contact with a warm surface; Thus, in a seat cushion, the foam softens and conforms to the persons body. This provides even pressure distribution and unconstricted blood circulation, significantly reducing discomfort, even over long periods. In addition, Backsaver foam has excellent energy absorption properties, which have made it excellent for use in the U. S. space shuttle program and in military aircraft and helicopters. Pilots find that Backsaver cushions reduce their discomfort and fatigue, even on missions of 8 hours or more. Aircraft Spruce now makes Backsaver foam available to the homebuilt and general aviation market. 17 x 18 sheet ........................ P/N 01-09325 ....................... $92.50 ea. 48 x 72 sheet ........................ P/N 01-09330 ..................... $541.00 ea.
CM WP ME HA AP LG EP CS
BACKSAVER FOAM
Confor Form (formerly called Temperfoam) is the conforming foam cushion that was developed for the Astronauts Couch back in the Apollo space program. Confor Foam has the capability of absorbing a tremendous amount of impact shock compared to common polyfoam and it is flame resistant. It is an excellent product that will give your seats enduring comfort that you never thought possible. Adapts to you for pressure point-free comfort that is really incredible. The best universal cushion for aircraft use is a 3 CF42/CF45/CF47 laminate. Confor Foam meets FAR 25.853, FAR 25.855, and CAL 117 burn specifications making it excellent for certified aircraft or homebuilts. Some special sizes in 1, 2, or 3 thicknesses are available on special request. 1 x 16 x 18 .........................P/N 01-09310 ........................ $21.85 ea. 2 x 16 x 18 .........................P/N 01-09320 ........................ $45.75 ea. 3 x 16 x 18 .........................P/N 01-09300 ........................ $74.75 ea.
IN EL AV TO PS BV
The inflatable air pillow can be installed just under the seat material and will give you the customized support where you need it. A convenient palm-size pump and a release valve control the firmness of the lumbar support. The In-Flight Back Support is made of a heavy-duty self-extinguishing neoprene rubber, specially designed to pass FAR 23.853 flame-test requirements. One inflatable lumbar support ................. P/N 13-01501 ..............$49.75 Two Inflatable lumbar supports ............... P/N 13-01821 ..............$81.95
Space Invader Window & Door formula produces a dense cell structure that exerts minimal pressure on surrounding lumber, and the frames of windows and doors. When cured, most of the foams cell cavities are quite small and closely spaced (70 percent of the foams cell structure is in this form, known as closed-cell, according to GE). This closed-cell structure permits 90 percent less water to enter it than comparable products, says GE. 12-ounce can P/N 01-09200 ................................$15.90
29
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
VACUUM VALVE - TWO PIECE - #8112 is a two-piece vacuum valve which requires one quarter turn to lock in place. Service temperature to 500 F. This valve is an industry standard The base is anodized and is red in color. Inside Diameter: 1/4 standard. Threads: 1/4 NPT. P/N 01-14855 ............. $28.50/ea. OVEN VACUUM HOSE - #8020 is a thick walled, flexible silicone hose. It is normally used for debulking and oven cures using vacuum only. Furnished in standard 10 foot lengths. Other lengths available on special order. Hose size: 1/4 ID. P/N 01-14860 ........... $109.95/ea. HIGH TEMPERATURE QUICK DISCONNECT SET - #8432 is a two-piece quick disconnect both male and female for use to 500 F at pressures up to 200 psi (13.8 bars). Sold as a set of male & female components. P/N 01-14865 ............. $23.75/set SHRINK TAPE - #9010 is an oriented polyester film designed to shrink as the laminate approaches cure temperature. The applied pressure is maintained during cure. It is used extensively where the shape of the assembly makes conventional bagging too labor-intensive. If excess resin needs to be released during cure, perforating the shrink tape after the assembly has been wrapped with a porcupine roller will reduce the resin content as well as permitting air and volatiles to escape. Thickness: .002. Width: 1-1/4, Roll length: 100 yds. P/N 01-14870 .............$15.85/roll GREENFLOW 75 - Greenflow 75 is designed to efficiently distribute resin with little waste due to the low profile, tight construction. Greenflow 75 can be used with polyester vinlyester and epoxy resins. Color: Green. Thickness: .035 .003 (.89mm75m). Melt Point (Method:DSC): 230F (161C). Configuration of Net: Rhombic P/N 01-01081 ....... $3.00/Lin. Yd. PORCUPINE ROLLER - #9060 is a steel roller with a wood handle designed to perforate films to allow air, volatiles, and some resin to flow through the film. The amount of resin flow can be controlled by the depth of the pin penetration. Also useful on foam to give the bonding adhesive a better grip on the foam surface. P/N 01-14880 ............. $85.25/ea. VACUUM GAUGE - a dial faced vacuum gauge capable of displaying vacuum from 0 to 30 Hg. It is 2 in diameter and can be used on the vacuum pump line, holding tank, or with a vacuum valve to determine vacuum in specific areas of a bagged assembly. Fitting size: 1/4 NPT. P/N 01-14885 ............. $15.50/ea. VACUUM PUMP - Standard vacuum pump ideal for small shop vacuum bagging operations. P/N 01-14891 ........... $374.00/ea. VACUUM PUMP KIT - Includes vacuum pump, gauge, valve, fittings, and hose. P/N 01-00164 ................. $437.95 VACUUM RELIEF VALVE P/N 52763......................... $14.75 BAGGING SUPPLIES STARTER KIT - Includes 10 yards of Vacuum Bagging Film #7400, 10 yards of 4.5oz. Breather Bleeder #3, 1 roll 400 resistant Sealant Tape (25 yards/roll), 10 yards Dacron Fabric 1.8oz.x 60, & 10 yards 60 x .001 Perforated Release Sheet. P/N 01-14894 ................. $123.95 PERFORATED RELEASE SHEETS - 60 width, .001 thickness. Sold by the yard. P/N 01-14895 ............... $4.40/yd. ECONOMY VACUUM GENERATOR - a low cost and reliable method of generating a vacuum for those who already own an air compressor. The generator will create 27 of Hg vacuum/pressure when coupled in-line to an air compressor capable of producing 2.2 cfm. Larger air compressors are advisable for continuous use applications. Suitable for parts up to 80 ft2. P/N 12-11148 ................. $174.85 VACUUM FORMING MACHINE CONSTRUCTION PLANS - Now only available on CD. You can take the disc to Kinkos and print the full set, or view it on your computer and print only what you need? 100 page illustrated assembly manual. About 30% of plans purchasers build a machine (based on oven kit sales), and almost no questions! Complete specifications are given for all parts. Easy to read construction manual uses a ring type binding so it lays flat and includes illustrations to make every step easy to understand. Heres what you get on disc: 106 page illustrated assembly manual with wiring diagrams in a ring binder. Separate parts lists, wood and steel cut lists and pump and tank sources. 3 full size cut-away drawings of an assembled machine 27 fully dimensioned assembly and parts drawings. 4 photo pages with 36 color pictures. P/N 01-14896 ................... $59.95
30
CM WP ME HA AP LG EP CS IN EL AV TO
Before doing any sort of plastic repair, use Super Clean plastic cleaner to maximize the durability of your repair. Super Clean removes mold release agents, wax, grease, silicone, tar, bugs, sealers and other contaminants from painted or unpainted plastic or metal surfaces. Its simple to use, just spray it on and wipe it off with a clean, lint-free cloth. P/N 01-00533 .......................$9.75
SMC Hard-set Filler is a 2-part epoxy system that is very rigid when fully cured. It works on ABS, SMC, fiberglass, polycarbonate and on any other repair application that requires a rigid, high impact resistant repair material. It has a working time of 3 to 4 minutes and is ready to sand in 15 minutes. P/N 01-00534 .................. $20.75
Plastifix repairs virtually any rigid plastic and works exceptionally well on ABS. Repair cracks, fill gaps, reinforce repairs, rebuild broken tabs, fix stripped threads, and more. PlastiFixs most unique feature is the FlexMold molding bar which allows you to create a mold and cast missing pieces. No other plastic repair is more versatile. the 30 gram kits are enough to complete approximately 24+ of cracked plastic repair. The large kits will do about 24 feet. Kit Includes: 253X Plastifix Powder 30G, 2520 Plastifix Liquid 50ML, 2542 Dropper Bottle Assembly, 2543 Power Application Cup, 2548 Transfer Pipette, 2550 Applicator Needle Qty: 2, 2560 Flexmold Molding Bar 10CC. 2501-PlastiFix Repair Kit (30g, white) ........... P/N 01-00542 ....... $30.75 2503-PlastiFix Repair Kit (30g, black) ........... P/N 01-00543 ....... $29.85 2504-PlastiFix Repair Kit (30g, clear) ........... P/N 01-00544 ....... $29.85 2502-Large Kit includes: 2531-L Plastifix Power 150G (WHITE), 2532L Plastifix Power 150G (BLACK), 2520 Plastifix Liquid 250ML, 2542 Dropper Bottle Assembly QTY 2, 2543 Power Application Cup QTY 2 2548 Large Transfer Pipette, 2550 Applicator Needle QTY 4 P/N 01-00545 ................. $89.75
Reinforcing Wire Mesh is designed to be used to reinforce any repair made with an airless plastic welder. We recommend that the mesh be used to when a tear goes to the edge of the plastic. Since it is stainless steel, it is 5 times stronger than aluminum wire screen and is virtually impervious to oxidation under normal conditions. You can also use the mesh to fabricate tabs, fill holes and provide reinforcement in any meltable plastic. P/N 01-00536.......................... $5.25
Flex-Tex is a unique blend of materials designed to be used for re-texturing repaired areas on instrument panels, consoles, etc. A wide variety of pebble-grained textures can be achieved with this product by varying the air pressure, distance from work, and speed of pass. Apply with a regular spray gun or a PreVal sprayer. Dries flat black. Must be top-coated with color for durability and appearance. P/N 01-00546 .............................$22.65
Each Insta-Weld Kit comes with Insta-Weld 1, InstaWeld 2, Activator, and Weld Compound. A complete set of instructions is included with each kit. This kit is designed to repair SMC, fiberglass, hard plastics, metals, rubber and other materials too numerous to mention. It does not work on polypropylene, polyethylene or TPO substrates. The small Insta-Weld Kit comes with a 1 oz. bottle of both the Insta-Weld 1, Insta-Weld 2 & 2 oz. bottle of Activator & weld compound. P/N 01-00538 ........................$31.25
Micro Weld 100 is a versatile and economical tool for repairing many type of plastics. Airless welding provides the doit-yourself-er and professional alike a way to economically repair many of the items that would normally be thrown away. Excellent for repair of plastic aircraft parts. FEATURES: 100 Watt heating element with built in temperature control unit 2045W Stainless Steel Reinforcing Mesh 5027HT Welding Tip Welder Stand Carry Case Instruction Booklet 15ft of 6 different welding rods P/N 01-00766 .......................No Match
MICRO-WELD 100
Insta-Weld 1 is our thin adhesive and is to be used when you have a clean break with no gap to fill. It has the consistency of water. To use, spray the borken area with 2303 Activator, clamp the parts together then appy a small amount of Insta-Weld 1. The adhesive will wick into the crack and create an instant repair. It does not work on polypropylene, polyethylene or TPO substrates. P/N 01-00539 .............................$13.50
Permanently recolor faded, scuffed, marred, or discolored plastics. Sticks to plastic without adhesion promter or primer. Just clean the plastic with Super Clean Plastic Cleaner & spray the paint. No mixing required! Gives satiny, OEM look when dry. Black (pint) ............................... P/N 01-00548 ......... $35.00 3601-4 Light Gray (quart) ......... P/N 01-00552 ......... $59.75 3602-4 Dark Gray (quart) ......... P/N 01-00553 ......... $55.25
Insta-Weld 2 is our thick adhesive and is to be used when it is necessary to fill a gap. Insta-Weld 2 is about the consistency of 30 weight oil. To use, spray one side of the break with 2303 Activator, apply Insta-Weld 2 to the other side, then clamp together. It does not work on polypropylene, polyethylene, or TPO substrates. P/N 01-00540 ...........$13.85
Clean Sheets are great to have around the shop. They allow you to keep your epoxy mixes clean and smooth while saving time by always having a clean surface to mix on. No more cutting cardboard to mix epoxy. 100 sheets per board. P/N 01-00550 ............. $32.50
PS BV
Our quick spray Activator causes instant curing of all Insta-Weld adhesives. Actovator may be used before or after adhesive is applied. Come in plastic bottles and include sprayer. P/N 01-00541 ................................ $12.50
Uni-Cloth is a quality fiberglass cloth that is well suited for reinforcing plastic repairs as well as any other application requiring fiberglass reinforcement. P/N 01-00535 .............................$14.45 Plastics Repair Instructional Book - P/N 01-00554 ...............$28.25 Plastics Repair Instructional DVD - P/N 01-00555 .............. $14.95
31
FILLERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These bubbles are actually hollow glass spheres. Because the high-quality glass is very crush resistant, the foam is much stronger, stiffer and water-resistant than any foam made by chemical foaming. These foams displace 4-6 times their weight in most resins and improve the handling characteristics of the base resin. They have a low bulk density and are nontoxic. Mix resin and hardener as directed, then fold in the glass bubbles. Upon cure, a strong, low-density product results which is easy to sand and file. May be shaped to form compound angles and curves. The term micro was applied to the mixture of microspheres and epoxy early in the development of composite structures. Although microspheres have been replaced by glass bubbles the word micro is still commonly used to reference the mixture. Micro is used to fill voids and low areas, to glue foam blocks together and as a bond between foams and glass cloth. Micro is used in three consistencies - (1) a slurry which is a one-to-one by volume mix of epoxy and glass bubbles, (2) wet micro which is about two to four parts glass bubbles by volume to one part epoxy, and (3) dry micro which is a mix of epoxy with enough glass bubbles to obtain a paste which will not sag or run (about five parts to one by volume). In all instances glass bubbles are added to completely mixed epoxy resin and hardener. Wet micro is used to join foam blocks and is much thicker than slurry (it has the consistency of honey) but can be brushed. Dry micro is used to fill low spots and voids and is mixed so that it is a dry paste and will not sag. Apply with a putty knife. Never use micro between glass layers.
GLASS BUBBLES
CAUTION - When mixing epoxy and glass bubbles, wear a dust mask and keep your face away from the balloons that may float up into the air. Although glass balloons are inert, they can lodge in your eyes or in your lungs and cause problems. Handle with care.
One Pound Bag (Approx. 1 Gal.) ............. P/N 01-14600 ............. $9.65 Five Pound Bag (Approx. 5 Gal.) ............. P/N 01-14700 ............ $39.85
These 12 disposable icing bags are ideal for applying beads of any size of micro epoxy or flox epoxy to all surfaces. Great for close-outs and are real time savers. Simply fill, cut end to desired bead size and squeeze. Never breaks down from epoxy. Sold in packs of 100 icing bags.Pack of 100 bags P/N 01-14710 ..... $14.75 Cab-O-Sil is a fumed lightweight silica thickener used to reduce the flow of epoxies on vertical surfaces, as well as filling pinholes with its smooth texture. 1 gallon bag ............................. P/N 01-04711............. $10.95 A structural resin filler. The mixture of cotton fiber and epoxy is referred to as flox. The mixture is used in structural joints and in areas where a very hard, durable buildup is required. Flox is mixed in much the same way as dry micro but only about two parts flock to one part epoxy is required. Mix in just enough flock to make the mixture stand up. If wet flox is called out, mix it so it will sag or run. Flox is often used to reinforce a sharp corner. Paint a light coat of pure epoxy inside the corner, trowel flox in to make a triangular support. The flox corner is done just before one glass surface is applied for a wet bond to one surface. 1 Lb. Bag ............. P/N 01-14800............... $3.95 5 Lb. Bag ............. P/N 01-14900.............. $19.75 As the name implies, this material is made by milling fiberglass into a very thin consistency. This material is used in preparing a structural filler. This material is used in fillets that require structural integrity. Milled fiber fillers have higher strength than cotton flock but have fine particles of fiberglass that can penetrate the skin.1 Lb P/N 01-14780 .......... $4.65
CAB-O-SIL
LCD display that shows ounces, pounds or grams. Tare feature lets you zero-out containers weight. Sealed buttons prevent damage from spills. Maximum capacity of 176 ounces (11 lbs. or 5000 grams) Automatic 40 second shutoff saves batteries. Not for commercial use. Uses four AA batteries, not included. Overall dimensions: 9-1/2 L x 6-3/4 W x 1-1/2 H P/N 12-02585 ...............$32.85
..
Automotive body filler, used extensively in composite construction to hold jig blocks in place, and for other temporary fastening jobs. Hardens quickly and can be chipped off without damaging the fiberglass. The color of the mixture is used to judge how fast it will set. As more hardener is added, the brighter in color the mixture becomes and the faster it hardens. #261 Pint (1-1/2 Lb.) ...... P/N 01-00365 .........$5.75 #262 Quart (3 Lb.) ............ P/N 01-00366 .........$7.95 #265 Gallon (12 Lb.) ........ P/N 01-00367 .......$23.75
BONDO
A formulation of polyester resin, talcs and Microspheres used as a lightweight filler on metal and fiberglass. Works easily, sands faster. Only 7.5 lbs. per gallon as compared to 12 lbs. per gallon for conventional fillers. 494 Gallon .....P/N 01-00368 ...............$20.75 492 Quart.......P/N 01-01072 ...............$10.50
DYNALITE
Ultra-compact design for super portability. Features an LCD screen with easy-to-read digital readout. Convenient hold feature locks weight display for ten seconds after item is removed. Digital postal rates. Rates update with Internet download. Operates on: 3 AAA Batteries (included)......................... P/N 12-01580............. $69.85
This aerosol spray adhesive works well to laminate styrofoam sheets together. Laminations cut well with a hot wire. Net wt. 16.75 oz. 24 fl. oz. Aerosol Spray Can ..... P/N 09-28330.......... $18.50
A universal repair compound. It is excellent for rebuilding or fabricating parts and as an all purpose adhesive for wood, metals, ceramic, glass, and many plastics. Fix-it can be tapped or drilled, sanded, filed or painted. Patch holes and cracks and seals leaks. Sets rock hard overnight. Fix-It Metal is the same as standard Fix-It except it is loaded with aluminum metal to match the strength, weight, and use for each project. Fix-It is nontoxic, non-hazardous, and impervious to fuels and liquids. Fit-It 1/4 Lb kit ............. P/N 01-14770 ........ $10.95 Fit-It 1 Lb kit ................ P/N 01-14775 ........$21.70 Fit-It Metal 1/4 Lb kit ... P/N 01-14790 ........$10.95 Fit-It Metal 1 Lb kit ...... P/N 01-14795 ........$21.70
FIX-IT
Urethane Supply Companys 1047 Putty Flex is a premium polyester finishing glaze that provides superior adhesion with excellent flexibility on plastics. Putty Flex produces excellent feather edge results on plastic, metal, SMC, fiberglass, cured primer and paint. Use to fill pinholes, dings, scrapes, sanding scratches and more! Putty Flex sands easily and resists clogging sandpaper. P/N 01-00961 ...............$23.75
32
FILLERS PRIMERS
An ultra-light, corrosion-inhibiting filler for aircraft, marine and automotive use. Adheres to composites, bare aluminum, steel and bare or varnished wood. Easy to mix & apply: mix 2 parts A:1 part B by weight: apply with squeegee; let dry overnight. Excellent sanding qualities. More consistent than hand-mixed micros. Wt: less than 5 lbs/gal. Ships Non-Hazmat. 1 Quart Kit (20oz. Resin/12oz Hdnr) ...........P/N 09-28250 ...........$22.90 3 Gal Kit (2 gal.Resin/1 gal. Hdnr) ............P/N 09-28260 ......... $204.00 The pinhole killer! Waterborne polyurethane primer plus UV blocker applied with a foam roller or spray gun. Fills pinholes in layups or molded parts. White color. Once UV Smooth Prime has dried for 7 days, spray white two-part catalyzed Epoxy Primer to seal the surface and provide moisture and chemical resistance prior to spraying top coat paint. Dry sand for a smooth, pinhole-free surface. Dries in 20 minutes, sand in two hours. Clean up with water. Use Poly-Fiber Gun Cleaner to clean your spray gun after each days spraying. NON-HAZMAT. Three gallons required for most composite aircraft. CROSSLINKING NO LONGER REQUIRED. 1 qt. w/16 ccCrosslinker ...................................P/N 09-28280 ......$58.20 1 gal. w/64 ccCrosslinker .................................P/N 09-28290 ....$176.00 A sprayable polyester filler/primer used for filling of minor surface irregularities such as scratches, blemishes and exposed fiberglass threads before final sanding and painting. It adheres to bare metal, plastic filler and fiberglass with minimal surface preparation. Cures ready to sand and paint in 45 - 60 minutes. Any type of finish - lacquer, enamel, acrylics - can be applied over Feather Fill with excellent adhesion. Quart kit includes catalyst and instructions. Approximately six quarts are required for finishing a Vari-Eze. DO NOT WET SAND. #401 (1 Qt.) ..............P/N 01-00369 ...........$41.75 #391 (1 Gal.) ...........P/N 01-00370 ......... $127.95 A one step finishing material from bare metal, body filler plastic, wood, aluminum, or fiberglass to a surface ready to accept any type of paint without concern about penetration of solvents or moisture. Provides fast build-up and fill, is non-shrinking, easy sanding, wet sandable and waterproof, and self-etching. Can be sprayed or brushed on and can be built up like Bondo or Featherfill. Ready to sand in one hour, and it does not clog up your sandpaper. Pot life and cure time aare about one hour at 70 degrees Farenheit. Versatile polyester filler. Quart .........................P/N 01-00558 ...........$73.65 Gallon........................P/N 01-00559 .........$162.95 Fill Bond aerospace putty from SherwinWilliams Aerospace Coatings has been created specifically for aerospace use. Designed to fill rivets, seams and small spot-repair areas on the exterior of aircraft fuselage and wings, this high-build body filler is now available in a convenient epoxy version. Fill Bond putty is extremely flexible, offers direct-to-metal adhesion (with properly pretreated aluminum), provides excellent spread ability and offers a long, workable pot life to give users the amount of time to apply material on a variety of aircraft surfaces, including aluminum and composites. The epoxy putty dries quickly for a fast sand - in just two to six hours. A specially-designed Fill Bond dispensing gun enables users to apply putty exactly where it is needed without requiring additional tools. Theres minimal waste following application. Users apply only as much product as they need and then can put the cap back on the convenient cartridge containers for later user, saving on material and disposal costs. Fill Bond Cartridge 750ML ................... P/N 01-01124 ...................$97.85 Fill Bond Cartridge 375ML ................... P/N 01-01125 ...................$75.50 Manual Dispensing Gun 370ML .......... P/N 01-01126 .................$143.75 Manual Dispensing Gun 750ML .......... P/N 01-01127 .................$187.65 Static Mixer Element............................ P/N 01-01128 .....................$4.85
SUPERFIL BY POLY-FIBER
AEROPOXY Light is a two-component, lightweight epoxy patching and filler paste for foam, wood, and composite surfaces. It mixes easily, applies smoothly, bonds strongly and sands quickly to make the hard job of surface filling much easier. Color Mix Ratio Gel Time, 100 gms @ 77F Specific Gravity Cured Hardness Compressive Strength AEROPOXY Light Reddish Tan 2 to 1 by weight or Volume 2-3 hrs. To Shape 5-6 hrs. To Sand 24 hrs. Full Cure .49 53 Shore D 2156 psi Test Method Visual Calculated ASTM D2471 ASTM D792 ASTM D2240 ASTM D695
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FEATHER FILL
EPL0151 is a clear two part resin / hardener which is ideal for bonding fiberglass, PVC, and graphite. Cure time is 6-8 hours. EPK1C is a white 2-part resin / hardener epoxy system which is used to bond aluminum and ceramics. EPK0151 Kit, 3.35 oz. (fiberglass) P/N 01-15875............. $13.50 EPK1C Kit 4.0 oz kit (aluminum) P/N 01-15880............. $11.50
An excellent filler which provides easy workability for a variety of applications. Easy to sand and cures to a neutral tan color. 1.7 Oz ....................... P/N 01-08780.......... $15.69 4.3 Oz. ...................... P/N 01-08785.......... $31.10
#1099 is a white, thickened epoxy material used to created the durable surface coat on room temperature epoxy molds. This surface coat can be brushed on as thick as 1/8 at a time without developing runs or sags. It is specially formulated to provide strong interlaminar bonds with the reinforcing materials, even if it is left unsupported overnight. #1099 readily accepts all our pigments, resists chipping and cracking, and retains its high gloss. Mix Ratio by Weight 100:11. 3.33 lb. Quart kit ....... P/N 09-01099.......... $71.85 Case.......................... P/N 09-01099-1 .... $544.00
* Quick Build Primer * Quickly fills uneven surfaces, and major imperfections * Easy sanding prep for surface primer, top coats * Low VOC product * Perfect Primer for prestec topcoats or any other surface coatings desired * Fairly Hi-Build to 120mils Color Size Part No. Price Color Size Part No. Price Gray Quart 09-02162 $34.25 Gray Gallon 09-02163 $82.75 Black Quart 09-02164 $34.25 Black Gallon 09-02165 $82.75 White Quart 09-02166 $33.85 White Gallon 09-02167 $82.75 Requires Catalyst P/N 01-01119.
Prime Coat ia s sandable, quick-drying aerosol primer which fills pin holes and scratches caused ny sanding on fiberglass, wood, metals and many plastics. Prime Coat will prepare the surface of materials for the finish coat and provides an effective corrosion barrier as well. Prime Coat is zinc chromate yellow and can be used under lacquer, enamel, acrylic or epoxy finish coats. 11 oz. can. P/N 01-00305 ......... $13.95
33
PEEL PLY
Excellent for releasing molded parts in high temperature and extreme pressure environments. MRX Silicone Spray Mold Release provides maximum releases and superior value for the end-user. This non-staining, non-corrosive mold release is heat stable up to 500F. It is a nonflammable product and contains no class I or II ozone depleting chemicals. Like all LPS MR-series mold releases, MRX Silicone Spray Mold Release doesnt use Methylene Chloride. 16 oz. aerosol can .....................P/N 09-00271 ............ $12.50
PVA (Polyvinyl Alcohol) should be used with #1016 Wax to aid in the release of parts form a mold. It should be applied in 3 thin mist coats over nonpourous, waxed mold surfaces.After the final wax coat has dried, begin by spraying a light tack coat of PVA. Typically, within 5 mins. the final heavier coats can be added. The PVA dries to form a smooth, glassy film. After part release, the residual film can be removed with water. We recommend using an inexpensive automotive siphon spray gun and 70-90 psi for application, although airbrushes will work on hobby size projects. PVA can also be sprayed over any polyester repair to provide an airless tack-free cure. For use with epoxies. P/N 01-14813A .........................................$24.75/qt
Provides superior release with minimum buildup on mold surfaces for casting urethane elastomers, epoxy, polyester, and rubber compounds. Molded parts are easily cleaned for finishing operations. It is effective on aluminum, steel, epoxy, polyester, and elastomeric molds; it does not distort intricate patterns. P/N 01-31749 .......... $27.75
Meguiars Mold Release Wax is a blend of imported waxes specially formulated to provide a maximum number of releases per application. P/N 01-09415 .....................$12.60
Onyx Black Silver Gray Bright Blue Dark Red Desert Camo Emerald Green
ZOLATONE PRIMER
Order 1 Qt. Colored Primer and 1 Qt. Catalyst High-temperature paste wax. 14 oz. P/N 01-00177 ..........$13.50
Price $37.75
Features: * Super Clear - Glass like appearance * Scratch Resistant * Buffs to a Super Hi-Gloss Finish * Refinishes to Original Hi-Gloss * Practically a Walk-A-Way Gloss Finish Product Applications: * Exotic wood coating * Gel coat additive for air cure application * Musical instrument wood coating * Top coat over clear primers * Top coat over pigmented colors for clear depth * Automotive interior composite parts clear coating * Archetectural wood crafts Quart .....................P/N 09-02168 .......... $36.50 Gallon ....................P/N 09-02169 ........ $104.50 Requires Catalyst P/N 01-01119.
34
COMPOSITE TOOLS
The tools offered in this section have been selected by professional aircraft designers and builders as being either necessary or highly desirable for working with composite structures.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These custom-built foam cutting frames can help produce professional results in foam cutting for the amateur builder. Constructed of 1-1/8 O.D. aluminum tubing, the heli-arc welded frame is lightweight yet extremely durable. The frames come completely pre-wired and ready to attach to the voltage controls shown below, and a tensioning system maintains uniform wire tension throughout the cutting process. The frames are stocked in 3 standard lengths, and custom frames are available on request (send sketch). Cutting depth is 11. Weight- 5 lbs. 2 Ft. Frame ....................P/N 01-15200 .................... $162.95 3 Ft Frame ....................P/N 01-15300 .................... $178.95 4 Ft Frame ....................P/N 01-15400 .................... $211.95
This highly recommended pump, aptly called Sticky-Stuff Dispenser, will save about $50 in epoxy in building a VE type aircraft, plus time, mess, dermatitis, temper and risk of bad batches. Used by individual craftsmen and professionals alike, it is a practical engineering tool especially designed to eliminate the sticky, messy, costly hand proportioning of epoxy resins. It is well built and should last through the construction of dozens of aircraft. The StickyStuff Dispenser assures accurate measurement of low-viscosity (under 3,500 centipoises) unfilled epoxy resin. The standard Model A dispenser pump delivers a ratio of 100 parts of resin to 44 parts of hardener. Adjustable Ratio Pump ............................... P/N 01-16010 ..$298.00 Rebuild Kit for 45:100 pump ....................... P/N 01-00504 ... $75.00 Small round replacement container (qt) ..... P/N 01-15920 ....$10.75 Large square replacement container (gal) .. P/N 01-15910 ....$17.75 Stainless Steel Check Valve (Use with Jeffco epoxies) P/N 01-00258 ....$56.50
An excellent new hot wire system consisting of a controller and transformer. Recommended by Rutan Aircraft Factory as a good system at a very economical price . P/N 01-15600 ......................... $41.95
SAFETY WIRE
Type 302 stainless steel safety wire, for hot wire cutter. This is superior to nichrome wire, which is brittle and breaks easily. Specify .032 or .041 diameter wire. .032 Dia. Wire, 25 Ft. Coil......... P/N 01-15725 ..................... $1.25 .041 Dia. Wire, 25 Ft. Coil......... P/N 01-15825 ..................... $1.25 1 Lb. Spool .................................. P/N 05-02687 ..................... $7.95
A fine quality control to supply the electrical current for hot-wire cutting of styrofoam and PVC foam. One unit can serve to build many aircraft. Input 115 volts AC Output variable from 0 to 130 volts AC at 5 amps Caution - fuse should be inserted in the secondary to protect the control in the event of a short circuit. Input: 117V AC 60Hz 3-Prong AC cord. Output: 0-130V AC Adj 60Hz; volt meter, power jack. Fuse Protection AGC: 5 Amp. Max: 500VA P/N 01-15500 ........................... $144.75
Does not stretch. Excellent for hotwiring polystyrene foam. .032 Dia. Wire ........... P/N 01-15805 .......$0.31 ft. .041 Dia. Wire ........... P/N 01-15810 .......$0.24 ft.
Music wire is high carbon steel and although very high in tensile strength, must be capable of wrapping around itself without showing signs of cracking. 156 ft. of .049 dia. wire per lb., 46 ft. of .090 dia. wire, per lb. 22 Gal. Price is per pound. .049 Dia. (1 lbs.) ............. P/N 03-49500 ...$3.97 .090 Dia.(32Ga.,1lbs.) .... P/N 03-49600 ...$3.15 .062 Dia 302 Stainless..... P/N 03-49610 ...$0.38
MUSIC WIRE
QTY. PART NO. DESCRIPTION 1 .................................20W ......................................... Glass Shears 1 box ......................01-25800 ...............................500 Mixing Sticks 2 boxes...................01-25700 ............................ 12 oz. Mixing Cups 2 boxes...................01-25710 ............................ 16 oz. Mixing Cups 10 ...........................01-24899 ............................ 3 Plastic Squegee 10 ...........................09-21200 ...................... 1 Disposable Brushes 10 ...........................09-21300 ...................... 2 Disposable Brushes 1 .............................12-01580 ................................. Electronic Scale 2 boxes...................01-36550 ......................................Latex Gloves 1 ............................ GLR123D ................ 1/2 x 3 Laminating Roller 1 ............................. GLR12C ............................... 1/2 Corner Roller 1 ...............................GLR26 ............. 2 x 6 Plastic Grooved Roller
35
COMPOSITE TOOLS
CM WP ME
Dusts, Mists, & Fumes Pre-Filter ................ P/N 01-00382............ $1.85 Fit/Check Filter Cover.................................. P/N 7500-27.............. $2.30
Perfect to measure and pour catalyst. The bottle will hold 16 oz. of catalyst and dispenses liquid safely and accurately from 2.5 to 35 cc. Measurements are instantly repeatable.
HA AP LG EP CS IN EL AV TO PS BV
Stainless Steel Instant Read 1: Dial Thermometer 0 Degree to 220 Degree F Shatter-Proof Plastic Lends Durable Stainless Steel Plastic Case/Calibrating Tool P/N 01-00394 .............. $10.25
These are the standard laminated rollers for wetting out woven roving and mat with polyester resin. Use with epoxy resin for applying tape into corners and for spreading thickened epoxy over large areas for gluing and fairing. 1x 3 ................................. P/N 01-01054 .........$8.85 1x 6 ................................. P/N 01-00396 .......$11.95 1x 9 ................................. P/N 01-00383 .......$17.50 2x 3 ................................. P/N 01-00384 .......$10.50 2x 6 ................................. P/N 01-00385 .......$16.65 2x 9 ................................. P/N 01-00386 .......$27.00 1/4 Corner Roller .............. P/N 01-00387 .......$10.60 1/2 Corner Roller .............. P/N 01-00388 .........$9.85 1/2x 3 Detail Roller.......... P/N 01-00389 .........$7.65 3/4x 3 Detail Roller.......... P/N 01-00390 .........$7.95 3/4x 6 Detail Roller.......... P/N 01-00391 .......$16.85
This kit consists of one post cure thermometer (P/N 01-00394) and 1 regulating thermostat (P/N 2E251) that allows control of electrical devices for heating. P/N 01-00393 ................. $34.00
3 wide rolIer with stipple adhesive cover. Has excellent stippling action for working out air bubbles in layups and has no tendency to lift the cloth. Use on all major layups. Order frame and cover separately. Roller Frame Only ............. P/N 01-24902 ..............$6.75 Cover Only ........................ P/N 01-24903 ..............$3.95
This is a very effective 2-1/2 diameter stainless steel mixer on a 15 shaft. Attach to an air drill for fast, efficient mixing of larger batches. It will not dig into or gouge the sides or bottom of your mixing container. P/N 01-00395 ..................... $22.60
JIFFY MIXER
Heavy duty cutting edges, Complete knife set. Over 40 blades to choose from. Specifications: Blades are made of the highest-grade steel and are ground to razor sharpness for precision cutting. Features include positiveholding blade lock Nonslip handles. Complete with 8 different handles 44 sharp blades An aluminum-oxide, wet/dry sharpening stone Packed in a handy plastic carrying-storage case with magnets to keep the blades in place Fine precision cutting tools for the lab-highest quality knife set. Ultramicro to heavy-duty cutting edges are perfect for corks, paraffin, plant samples, and rubber tubing. Exceptionally sharp knives are ideal for delicate, close-tolerance, accurate cutting needs. High-grade steel construction - Blades are made of the highest-grade steel and are ground to razor sharpness for precision cutting. Features include positive-holding blade lock, nonslip handles, and a perfect weight for balance. Over 40 blades - Comes complete with 8 different handles, 44 sharp blades, and an aluminum-oxide, wet/dry sharpening stone. Set is packed in a handy plastic carrying-storage case with magnets to keep the blades in place. P/N 12-00381 ..................... $67.50
NO. 5083 KNIFE SET Nos . 1, 2 and 6 knives plus 14 assorted extra blades in beautiful wooden chest. P/N 01-17400 ........... $43.25
36
COMPOSITE TOOLS
STANLEY TOOLS STANLEY TAPE MEASURE
This 12 foot steel tape measure, with 1/2 blade, is graduated in tenths and hundredths of inches and also in fractions of inches (32nds). Very handy for all aircraft construction. A must for composite construction. No. 33-272 ...... P/N 33-272 .......$17.90 A 6-ft. long kiln-dried spruce board, 7/8 to 1 thick and 3 to 4 wide, used for checking the straightness of flying surfaces during composite construction. P/N 01-25900 ................................ $18.85
STRAIGHT EDGE
CM WP ME HA AP LG
Flexible stainless steel rule graduated in l0ths and l00ths on one side and in quick-reading 32nds and 64ths on the other side. 6 inch ................ P/N 616 ........... $5.25 12 inch .............. P/N 12-02062.. $8.95
6 STEEL RULER
Aluminum, die-cast in two sections provides blade storage. Has handy hang hole. Furnished with No. 11-921 blade and blade guard. No. 10-099 ........ P/N 10-099 .......$7.80
Used for marking locations on fiberglass throughout construction. P/N 01-26000 ............... $0.42
KNIFE BLADE
Heavy-duty pointed razor-type utility knife blade for No. 10-099 knife and most other makes of utility knives. No. 11-921 (Pkg. of 5 Blades) P/N 11-921 ...... $2.45
For use with No. 10-099 knife and most other makes of utility knives to cut linoleum, roofing material, cartons, etc., without damage. The razor-sharp hooked ends cut to full thickness in one stroke. No. 11-961Pkg. of 5 Blades ...........................P/N 11-961 ............ $6.20
HOOK BLADE
For use with standard electric drill for hard-to-reach jobs. #10 (.1935 Dia.) ............................ P/N 12-05500.........................$7.75 1/4 Dia. .......................................... P/N 12-05600.........................$8.50
EP CS IN EL AV TO PS BV
SPRING CLAMPS
Heavy-gauge steel clamps with vinyl grips and tips to prevent marring work. Jaws specially formed to hold flat or round objects. Two sizes available: No. 3201-HT Jaw Opening 1, Length 4 P/N 83-261................$2.50 No. 3202-HT Jaw Opening 2, Length 6 P/N 83-262................$3.75
This assembly consists of a 1/2 dia. AT418E-4 100 cutter, a 1/4 dia. AT416- pilot and an AT409-1 adapter with 1/4 dia. shank for use with a hand drill. The adapter has a collet-like shaft to securely hold the replaceable pilot. Add pilot dash number to AT409. To complete part number see tool section for complete selection of pilots. Complete Assemblies........................................................See Page 680 A 5/8 diameter boring tool, with 1/4 diameter pilot. 10 threaded extension is used for boring holes in hard to reach places. Used in the installation of the landing gear on the LongEZ and Cozy aircraft. 3/4 bore does not have 1/4 pilot and must use the pilot received with the 5/8 boring tool. 5/8 diameter w/pilot ........................... P/N 12-00219 ..................$55.75 3/4 diameter without pilot .................. P/N 12-00220 ..................$39.50
COUNTERSINK
COUNTERBORE
DOVETAIL SAW
RUBBER SEALANT
Cuts a true, smooth and narrow kerf. Comfortable hardwood handle provides positive grip. Professional quality. No. 15-022 .................... P/N 15-140 ..................$27.90 No. 732 RTV general-purpose, clear, one-part silicone rubber. Cures to a firm silicone rubber in 24 hours at room temperature. 4.7 Oz. Tube .......... P/N 09-27800 ...................... $7.95
37
COMPOSITE TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS
ORDER ONLINE!
Makes clean cuts on fiberglass fabrics and other materials. The disc blade is made of high quality tungsten steel which is very sharp. Used by highvolume composite shops. Use with wooden backing board and handle knife with caution. RTY-2 Cutter................. P/N 01-00299 ...... $15.75 Replacemnt Blade ....... P/N 01-00300 ........ $6.95 Blades (5 Pack) ............ P/N 01-00301 ...... $27.75
This graduated 2 oz. syringe is ideal for measuring and dispensing precise amounts of resins and other liquids. Note: The ink used for the graduation lines are not solvent resistant. They will rub off if contacted with a solvent. P/N 01-25635....................$4.85
This all aluminum cutter however, will not melt when exposed to acetone, methylene chloride and other chemicals used to clean the cutters after use on wet layups. After use the aluminum rotary cutter is cleaned by simply leaving it in a can filled with acetone. Aluminum Rotary Cutter ..................... P/N 09-24906 ...................$38.40
DISPENSER BOTTLE
Polyethylene bottle with Yorker (applicator) cap. 4 Oz. Bottle ..................... P/N 01-24905..............$0.53 16 Oz. (1 Pint) Bottle ...... P/N 01-24906..............$1.20
INDUSTRIAL SYRINGE
This cutter handle is all aluminum with special stainless hardware for easy assembly when changing out rotary cutter blade. Will not melt when exposed to acetone, methylene chloride, and other chemicals. Good for wet layups. To clean, just drop in small container of acetone. .... P/N 01-01047 ...................$36.50
dispenser.
Made of hi-impact polyethylene with seamless body and special safety-grip plunger. Capacity 10 cc. Tapered dispensing nozzle can be clipped with scissors at proper diameter to govern output. Excellent epoxy P/N 01-25000.......................... $2.75
These color-coded mil gauges are solid anodized aluminum for long life and come in four sizes for a variety of FRP applications. Machined to close tolerances (0.0001) for accuracy and available in mils (inches) and microns (metric). 3-18 mils ................. P/N 01-00411 ........$5.25 10-35 mils ............... P/N 01-00412 ........$5.25 40-65 mils ............... P/N 01-00413 ........$3.65
MIL GAUGES
Natural, undyed bristle brushes with smooth, unpainted wooden handles. Unaffected by paints, dopes, resins, thinners or solvents. 1 Wide Brush ........... P/N 09-21200 ....... $0.43 2 Wide Brush ........... P/N 09-21300 ....... $0.56
PAINT BRUSHES
Developed especially for working with epoxies, this 6, or 36 wide hard rubber squeegee is superior to the plastic types. Can be easily cleaned & reused many times. 6 Squeegee ....................................P/N 01-24901 ...................$3.95 ea 36 Squeegee ..................................P/N 01-00012 .................. $26.75ea
RUBBER SQUEEGEE
Use again and again for liquid ingredient accuracy. A must-have item when mixing resins. Seal the liquid in the container with the matching sized plastic lid. 1 Qt. mix cup .................................. P/N 01-00915......................... $0.99 1 Qt. lid ........................................... P/N 01-00926......................... $0.51 2.5 Qt. mixing cup .......................... P/N 01-00330......................... $1.84 2.5 Qt. lid ........................................ P/N 01-00331......................... $0.83
This plastic spreader is excellent for spreading epoxy at a steady rate to provide an even surface. Measures 4 x 4 and is notched on three sides in increments of 1/8, 3/16, 1/4. P/N 01-24909................... $0.97 ea
NOTCHED SPREADER
Unwaxed, flat bottom paper cups in three convenient sizes for small mixes. 3 Oz..... (100 Cups) .......... P/N 01-25600............. $6.75 8 Oz..... (50 Cups) ............ P/N 01-00416............. $9.50 12 Oz... (60 Cups) ............ P/N 01-25700...........$13.75 16 Oz... (24 Cups) ............ P/N 01-00324............. $7.75
These mixing sticks are medical tongue depressors which work well for mixing small batches of epoxy. Size: 3/4 x 6. Box of 500 ..........P/N 01-25800 ......$10.75
MIXING STICKS
BV
www.aircraftspruce.com
60,000 Parts! 24 Hour Access! Fast, Easy Navigation!
This tapered spatula is stainless steel with wood handle. Ideal for making 3/8 radii on bulkheads, ribs, or anywhere a uniform radius is required. P/N 01-24915 ...........................$3.40 ea.
38
COMPOSITE TOOLS
DREMEL TOOLS
DREMEL MOTO-TOOL A versatile, precision power tool with many uses in the construction of composite aircraft. Ideal for wood, plastics and metals. Sturdy, shatter-proof nylon housing. MODEL 100 MOTOTOOL - Constant Speed: 35,000 RPM. Lubricated bronze sleeve bearings. Amps: 0.8 P/N 01-18600 .................. $46.95 MODEL 395 MOTOTOOL - Variable Speed: 5,000-28,000 RPM with 100% ball bearing construction for long life, smooth operation. External caps allow for easy replacement of motor brushes. Amps: 0.75 (low speed), 0.9 (high speed) ..............................................................................................................................P/N 01-18700 ...................$79.25
CM WP ME HA AP LG EP CS IN
DREMEL TWO SPEED ROTARY TOOL KIT - The Dremel 200 Series rotary tool
offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutP/N 01-01145 ........................$84.95
primarily with cut-off wheels but is used with the following Dremel accessories: 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541. Shank Diameter 1/8, 3,2 mm P/N 01-22000 ......................$2.45 NO. 428 WIRE BRUSH Ideal for cleaning and removing rust and corrosion from items made of brass, copper or other soft ferrous metals-such as tools, door knobs, automobile parts and electrical contacts. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard-to-reach places like slots. Bit Diameter Inch 3/4. Bit Diameter mm 19,1 mm. Color Code Yellow. Description Carbon Steel Brush. Shank Diameter 1/8, 3,2 mm. Model Number: 428 P/N 01-22100 ....... $2.45 REPLACEMENT MOTOR BRUSHES - (Specify Moto-Tool Model No.) P/N 01-18701 ....... per pair $3.25
MULTIPRO CHUCK - The Dremel MultiPro chuck allows you to quickly and easily change accessories on your Dremel MultiPro rotary tools without changing collets. Will accept accessoroies with 1/32 - 1/8 shanks. Use only with corded MultiPro tool models 275, 285, 395, 595. P/N 01-00131.............$9.50 NO. 407 1/2 DRUM SANDER - Ideal for rough shaping of wood and smoothing of fiberglass. Sander bands are replaceable. Furnished w/ one band. 1/8 shank P/N 01-19000 .............$3.30 NO. 408 DRUM SANDER BANDS - 1/2 Diameter, Coarse grit. P/N 01-19100 .............$2.45 CARBON MOTOR BRUSH - One pair of motor brushes for use with Dremel rotary tool model(s): 100, 200, 275, 285, 300, 395 and 595 (Type 4, 5 and 6) and Dremel contour sander 6000 (Type 1 and 2). P/N 01-01180.............$3.55 DREMEL 543 CUTTING / SHAPING WHEEL - For cutting and shaping on soft and hard woods, fiberglass, plastics and laminates (not metal.) This versatile wheel is coated with tungsten carbide grit for long life. It is coated on both sides, so it cuts and finishes in one operation. P/N 01-01056 ..........................................................$15.75 NO. 402 MANDREL The 402 mandrel is used
High Speed Cutters can be used for shaping, hollowing, groving, slotting, making tapered holes in soft metals, plastics and woods. Number 198 and 199 cutters can be used to make small slits.
932
941
952
100
114
115
116
117
118
121
124
125
131
EL AV
134 954 Cutter #971 #997 #8153 971 997 8153 8175 8193 8215 Part No. Price Cutter Part No. Price #8175 01-00145 $2.45 01-00142 $2.45 #8193 01-00146 $2.45 01-00143 $2.45 #8215 01-00147 $2.45 01-00144 $2.45
144
190
191
192
193
194
196
198
199
Part No. 01-19200 01-19300 01-20800 01-20900 01-21000 01-21200 01-19400 01-19600 01-21300
Price $4.90 $4.90 $4.90 $4.90 $4.90 $4.90 $4.90 $4.90 $4.90
Cutter #134 #144 #190 #191 #193 #194 #192 #196 #198 #199
Part No. 01-19800 01-20000 01-20200 01-20300 01-20500 01-20600 01-20400 01-20700 01-21600 01-21700
Price $4.90 $5.95 $4.65 $4.90 $4.90 $4.90 $4.90 $4.90 $4.60 $4.95
TO PS BV
Fast cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. Part No. 01-00152 01-00153 01-00154 Price $12.75 $12.75 $12.75
9931
9934
#125
39
SANDING TOOLS
SANDING BLOCK
CM WP ME HA AP LG EP CS IN EL AV TO PS
CURVED TOOTH FILE
Wet or dry Tri-M-Ite (3M) is a silicon carbide abrasive paper made especially for producing satin-smooth finishes on metal and other doped, lacquered or enameled surfaces. Wet or dry performs best when used with water or oil, but can also be used dry. Sheet size 9 x 11. Available in 220-A, 280-A, 320-A or 400-A grit. (Type A paper has an especially light, flexible backing). Sandpaper Grit Size Part No. Price/ Sheet 120-A 220-A 280-A 320-A 400-A 09-20550 09-20600 09-20700 09-20800 09-20900 $0.99 $0.96 $0.89 $0.92 $0.89 Sandpaper Type Aluminum Oxide 36 Grit Open Coat D Weight A hard rubber tool which comfortably fits the hand for scratch- to finishsanding. Used by professionals for years in all sanding operations. Simply cut a piece of sandpaper 2-3/4 x 9 and insert each end into the sanding block. Paper is held securely by nail retainers. Makes the sanding operation much easier. Model No. 100 ................... P/N 01-26400 ..................... $5.80
Preppin Weapon is a handy sanding block made of Styrofoam core and high impact ABS that wont break when dropped. Easy to grip for wet or dry sanding. Contoured to fit the shape of a hand and is sized to fit a 14 sheet of plain backed 8 x 11 sandpaper or a 2 34 wide file paper. Its coil spring design holds single or multiple sheets equally tight and saves reloading time by stacking up to 4 sheets and tearing them away as the abrasive wears out. Save reloading time by using colors to indicate grits. Excellent for builders of aircraft, boats, cars, etc. Yellow ...................P/N 12-00505 ...............$16.75 Red .......................P/N 12-00506 ...............$16.75 Green ....................P/N 12-00507 ...............$16.75
The weights and grits listed have been found to be the most effective for sanding fiberglass/epoxy surfaces. Sheet Size: 9 x 11. Part No. 01-26200 Price /Sheet Less than 50 Sheets $1.30
SANDPAPER
A unique sanding tool which uses a 1-1/2 wide strip of sandpaper formed to make a belt. Locked taut by a patented mechanism that snaps into place with a finger pull. Its knife edge sides and padded body sand close to right angle fittings & fit into small concave recesses. Sander body is 7/8h x 4l and made of high impact plastic. Buy ready-made belts or make your own (6 belts from standard sheet). Mini-Sander .......................................... P/N 01-26800 ................$5.75 Wet or dry Mini-Strips, 3 - #500, 3 - #320, 3 - #220 Pkg. of 9 Strips..................................... P/N 01-26900 ................$6.10 New Continuous Belts (load free) Aluminum Oxide #120 Package of 3 ........................................ P/N 01-26910 ................$5.75 New Continuous Belts (load free) Aluminum Oxide #220 Package of 3 ........................................ P/N 01-26915 ................$5.50
MINI-SANDER
SANDPAPER 3M
These user friendly sanding blocks are made from extruded, anodized aluminum. The 32mm (1.25) Radius Curve is covered on the external and internal radius with Tungsten Carbide abrasive sheets. The Contour Blocks come in either the Coarse (60US grit approx.) or Fine (120US grit approx.) Small block is 5.5 long and large block is 11 long. Benefits: Shape and sand curves, grooves, etc. quickly and easily Great for fillets, leading edges, under cambers, etc. Extremely tough, will not wear out like normal sandpaper Will last for years without having to change the sheets Does not clog easily (brush or knock out) Easy to remove glues, resins, paint, epoxy etc. w/ paint remover 140MM Contour Block (COURSE) .............P/N 01-00591 ............$23.25 140MM Contour Block (FINE) ....................P/N 01-00592 ............$22.95 280MM Contour Block (COURSE) .............P/N 01-00593 ........... $33.65 280MM Contour Block (FINE) ....................P/N 01-00594 ............$34.95
BV
Milled files designed for smooth, fast work on annealed steels, hard plastics and composite materials. 14 length, 1-11/32x5/16 sections, 8 teeth per inch. P/N 01-00392 .................$39.50
These Tee Bar sanding blocks provide a large, straight, and flat sanding surface which wont wear out. Easy to hold, can be used over and over and are permanently anodized. These blocks can help provide straighter and truer surfaces. The self-adhesive sanding strips can be cut to any length, are clean and neat, do not need glue and do not peel. Furnished in handy 3 wide x 5 yard rolls and available in various grits. 11 Aluminum Tee Bar .................................... P/N 01-25008 .........$3.75 Silicone Carbide Fine Sanding Strip ............... P/N 01-25002 .........$9.50
40
CM WP ME HA AP LG EP CS IN EL
Supplied with a 3mm integral arbor so they may be used in reversible drive drills and hobby drills. These files are well balanced and run smoothly, and cur a wide range of materials with little need for secondary finishing. Available in coarse and fine grit.
ROTARY FILES
Model No. RF1C RF1F RF2C RF2F RF3C RF3F RF4C RF4F RF5C RF5F RF6C RF6F
Part No. 12-00070 12-00071 12-00072 12-00073 12-00074 12-00075 12-00076 12-00077 12-00078 12-00079 12-00080 12-02247
Description Narrow Cone coarse Narrow Cone fine Wide Cone Coarse Wide Cone Fine Drum Coarse Drum Fine Pancake Coarse Pancake Fine Domehead Coarse Domehead Fine 1/8 diameter Rod Coarse 1/8 diameter Rod Fine
Price $13.75 $13.10 $13.75 $12.85 $13.75 $13.75 $13.75 $13.75 $13.50 $13.75 $13.50 $13.50
These durable cutting discs are abailable in two sizes (19mm and 32mm) and come complete with a 3mm steel arbor to fit hobby drills. Will cut all woods, piano wire, composites, ceramics, stone, etc. Description Price 19mm diameter disc with arbor $12.25 32mm disc with arbor $12.95 19 & 32mm disc with arbor $20.75
These extremely versatile tools are excellent for shaping and finishing. They will cut in any direction and do not clog easily. Our needle files cut quickly and leave an excellent finish. Very popular for detail work. LARGE NEEDLE FILES Furnished in Medium 280 grit. RIFFLER FILES
FILE HANDLE
NEEDLE FILES
NEEDLE FILES
P/N 12-00060 These verstile sanding blocks are ideal for sanding large areas, creating straight edges, producing dihedral angles, profiling leading edges, feathering trailing edges, and more. The sanding blocks are coarse grit on one side and fine grit on the opposing side. The flexible grit strips can be cut and shaped to any form, external or internal.
Part No. Description Price 12-00064 140mm x 51mm Coarse one side, fine opp. $20.90 12-00065 280mm x 51mm Coarse one side, fine opp. $31.25 12-00066 560mm x 51mm Coarse one side, fine opp. $47.50 12-00060 51mm x 280mm Fine Grit Strip $10.75 12-00061 51mm x 280mm Coarse Grit Strip $10.75 12-00062 51mm x 140mm Fine Grit Strip $8.75 12-00063 51mm x 140mm Coarse Grit Strip $8.75
Model No. NF1H NF1 NF-F NF-K NF-R NF-S NF-T RIF-1 RIF1 RIF-F RIF-H RIF-R RIF-S RIF-T LNF-1 LNF-F LNF-H LNF-R LNF-S LNF-T NFH
Part No. 12-00081 12-00082 12-00083 12-00084 12-00085 12-00086 12-00087 12-00088 12-00089 12-00090 12-00091 12-00092 12-00093 12-00094 12-00095 12-00096 12-00097 12-00098 12-00099 12-00100 12-00101
Description Set of 5 needle files w/ Handle Set of 5 needle files w/o Handle Flat needle file Knife needle file only Round needle file only Square needle file only Triangle needle file only HSet of 5 Riffler files w/ Handle Set of 5 Riffler files w/o Handle Flat Riffler file only Half-round Riffler file only Round Riffler file only Square Riffler file only Triangle Riffler file only Set of 5 Large needle files / no handle Flat Large needle file only Half-Round Large needle file only Round Large needle file only Square Large needle file only Triangle Large needle file only Needle File handle only
Price $47.50 $42.50 $11.25 $10.80 $11.25 $10.80 $11.25 $48.95 $44.25 $11.25 $10.80 $10.90 $10.80 $10.80 $47.50 $12.95 $12.40 $12.95 $12.40 $12.95 $4.40
AV TO PS BV
excellent finish.
Set of 5 files: Hand, Round, Halfround, Square and 3-Square Extremely versatile tools, popular for detailed work.These file cuts in any direction and does not clog easily. Cuts quickly leaving an P/N 12-01752..............$51.95
Comfortable plastic handle with brass collet to accept all large (18cms) needle files.Overall length 115mm. Collect 5mm PN 12-00166.................$4.35
41
Disposable but reusable gloves which resist tearing. Large size. Fits right or left hand. Box of 100. P/N 01-36550 ....................$10.85
LATEX GLOVES
Lightweight liners - wear under latex gloves. More comfort, improved sensitivity. P/N 01-36600 .....................................$1.25/Pair These gloves are resistant to the permeation of epoxy resins and curing agents and have been found to offer by far the best protection of any glove available. P/N 01-36700 ................... $22.85
COTTON GLOVES
BUTYL GLOVES
GLOVES IN A BOTTLE
These are the tough, full-body suits with hoods that professional painters use. Available in extra large or extra extra large. X-Large ...................................P/N 01-36800 ................$7.75 XX-Large.................................P/N 01-36805 ..............$11.60
TYVEK SUITS
SERIES 8 - A less expensive clone of the famous PR88 hand creme developed in Europe, Series 8 is highly recommended by Rutan Aircraft Factory for working with epoxies. It protects hands from most epoxies, grease, oil paint, paste, gasoline, tar, lacquer, acetone, styrene, fiberglass and many more substances. It helps prevent chapping, cracking and drying of hands, and is an excellent aid to persons with sensitive skin. No soap is needed for cleanup - hands wash clean with water alone. 4 Oz. Plastic Cup ................P/N 13-38302 .................................... $4.85 32 Oz. (Qt.) Plastic Jar ........P/N 13-38306 .................................. $14.60
THE TYVEK SUIT - The Lowest-Priced Recycled Coverall. You work with messy stuff... dirt, paint, solvents, chemicals, oil, grease. Protect your skin and clothing with an affordable barrier garment the Tyvek suit. These multipurpose suits are so durable you can wear them over and over. But theyre priced so low, you can afford to throw them away when its time. Size PN Price Small 12-01826-S $5.85 Medium 12-01826-M $5.85 Large 12-01826-L $6.00 XL 12-01826-XL $6.75 XXL 12-01826-2XL $6.75
Provides a thin, invisible, flexible film which is an excellent barrier to epoxy resins, rubber adhesives, vinyl plasticizers, polyester resins and glass fibers. Epoxy and gel wash off easily in soap and water. One-Lb. Jar ...................... P/N 01-36100.................... $6.85 Can be mixed with soap and water. Is harmless to rubber. Use as a solvent for thinning, removing and cleaning epoxy, brushes, and equipment. Gallon ..................................P/N 01-00399 ................$12.75
DENATURED ALCOHOL
Cleans polyester and epoxy resins from tools and hands without the hazards associated with chemical cleaning solvents. It is a non-volatile, non-flammable, and a biodegradable replacement for acetone and MEK solvents. Replacetone separates resins to the bottom of the cleaning container, but it does not dissolve them. Pour off non-emulsified Replacetone and use again. Quart ................................................. P/N 01-08823 ................. $13.50 Gallon ................................................. P/N 01-08834 ................. $23.75
REPLACETONE
TYVEK DISPOSABLE SHOE COVERS - Boot Covers High top boot covers w/elastic top. PN 12-01825 ............................. $1.65 TYVEK DISPOSABLE - Shoe Covers, Boot Covers With a Tyvek disposable shoe covers you dont have to compromise. Thats because Tyvek disposable shoe covers deliver the best balance of protection, durability and comfort. Color: White. PN 12-01995 ............................. $0.98
42
CM WP ME HA AP LG EP CS IN EL AV TO
THICKNESS (Inches)
1/8 3/16 1/4 5/16 3/8 1/2 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/8 1-1/4 1-1/2
2-3/4
$3.25 $2.35 $2.95 $5.25 $5.50 $6.25 $6.25 $6.25 $7.25 $7.25 $8.00 $8.00 $8.00 $8.75 $9.50 $9.50
3
$3.25 $2.85 $3.25 $5.25 $6.25 $6.25 $6.25 $6.25 $8.00 $8.00 $8.00 $8.00 $8.00 $9.50 $9.50 $9.50
3-1/4
$3.25 $3.10 $3.25 $5.25 $6.25 $6.25 $6.25 $6.25 $8.00 $8.00 $8.00 $8.00 $8.00 $9.50 $9.50 ---
3-1/2
$3.25 $3.25 $3.25 $6.25 $6.25 $6.25 $6.25 $6.25 $8.00 $8.00 $8.00 $8.00 $8.00 $9.50 $9.50 $9.50
3-3/4
$3.25 $3.25 $3.25 $6.25 $6.25 $6.25 $6.25 $6.25 $8.00 $8.00 $8.00 $8.00 $8.00 $9.50 $9.50 $9.50
5
$4.85 $4.85 $4.85 $9.50 $9.50 $9.50 $9.50 $9.50 $10.75 $12.00 $12.00 $12.00 $12.00 $14.50 $14.50 $14.50
5-1/4
$4.85 $4.85 $4.85 $9.50 $9.50 $9.50 $9.50 $9.50 $11.00 $12.00 $12.00 $12.00 $12.00 $14.50 $14.50 ---
5-1/2
$4.85 $4.85 $4.85 $9.50 $9.50 $9.50 $9.50 $9.50 $11.50 $12.00 $12.00 $12.00 $12.00 $14.50 $14.50 ---
5-3/4
$4.85 $5.00 $4.85 $9.50 $9.50 $9.50 $9.50 $9.50 $12.00 $12.00 $12.00 $12.00 $12.00 $14.50 $14.50 ---
6
$5.50 $5.50 $5.50 $11.25 $11.25 $11.25 $11.25 $11.25 $12.50 $14.25 $14.25 $14.25 $14.25 $17.00 $17.00 $17.00
* Prices shown are for lengths less than 12 feet. Add 15% per foot for lengths longer than 12 feet. Please order by part number and also state exact thickness, width and length to verify part number. Spruce part numbers begin with 02 and finish with thickness and width. Examples: 3/4T x 5-1/4W is P/N 02-34514; 1-1/4T x 6w is P/N 02-1146. Provide part number and footage required of each size. Specify any particular lengths required. Thicker & wider sizes subject to availability. Request quotation.
PS BV
*Prices shown are for lengths less than 7 feet. Add 20% for lengths 7-10 feet and 35% for lengths over 10 feet. Please order by part number and also state exact thickness and width. Begin part number with 02, then thickness & width. Example: 1/4T x 3/8W is P/N 02-1438. Capstrip is furnished in lengths as specified by customer.
43
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Acro Sport ...................................................... 02-03700 .........$509.65 Acro Sport II ................................................... 02-03800 ......$1,227.75 Baby Great Lakes........................................... 02-03900 .........$782.51 Bobcat ............................................................ 02-25100 .........$715.00 Christavia MK 1 .............................................. 01-39880 .........$865.00 Christavia MK 4 .............................................. 01-39910 ......$1,660.17 Corby Starlet CJ-1 (less spars) ...................... 02-04300 .........$930.57 Cvjetkovic CA-65 ............................................ 02-04400 ......$2,337.00 Cygnet ............................................................ 02-04500 .........$853.00 EAA Bi-Plane (Original Wing) ........................ 02-00223 ......$1,225.00 EAA Bi-Plane (P-Wing) .................................. 02-04600 ......$1,216.00 Fly Baby Spruce Kit........................................ 01-00977 ......$1,905.55 GN-1 Aircamper **.......................................... 02-04700 ......$1,717.99 GP-4 ............................................................... 02-25200 ......$4,284.40 Hatz Bi-Plane ................................................. 02-04800 ......$1,726.75 Kelly-D ............................................................ 02-04900 .........$804.00 Mitchell B-10................................................... 02-05000 .........$423.95 One Design ................................................... See Page 15 for Kits Osprey II ** ..................................................... 02-05100 ......$4,175.05 Pietenpol Aircamper Wing Kit ........................ 01-00582 .........$908.38 Pietenpol Aircamper Fuselage Kit .................. 01-00583 ......... $515.26 Pietenpol Aircamper Stabilizer & Elevator ..... 01-00584 ......... $143.38 Pietenpol Aircamper Rudder & Fin Kit ........... 01-00585 ........... $29.64 Pitts Special (Basic) M-6 or S-1D .................. 02-05200 ......$1,143.13 Pober Pixie (spruce & plywood) ..................... 01-01136 ...... $1,776.22 Rand KR-1 ** .................................................. 02-05400 .........$836.86 Rand KR-2 ** .................................................. 02-05500 ......$1,008.91 Rand KR-2S ................................................... 02-05510 ......$1,079.72 Rutan VariViggen ........................................... 02-05600 .........$435.00 Skybolt ............................................................ 02-05700 ......$1,259.84 Smith Miniplane .............................................. 02-05800 .........$607.73 VP-1................................................................ 01-00222 .........$698.60 VP-2................................................................ 02-08800 .........$825.60 Volmer Sportsman VJ-22 (less wings) ........... 02-06000 ...... $1,634.43 War Aircraft Corsair ........................................ 02-06100 ...... $1,042.60 War Aircraft P-47 ............................................ 02-06200 .........$478.44 War Aircraft FW-190....................................... 02-06300 ......$1,083.00 War Aircraft Sea Fury..................................... 02-06400 ......... $564.00 Wittman Tailwind** ........................................ 02-06500 .........$962.00 ** Wing & aileron spars finished to net dimensions. Not beveled.
SPRUCE KITS FOR UNLISTED DESIGNS CAN BE FURNISHED IF A MATERIALS LIST IS SUBMITTED.
NOTE: Our spruce kits are produced from materials lists which are believed to be accurate. However, since designers may modify certain dimensions after the original plans are released, we urge the builder to verify sizes and current price before ordering.
Standard Spruce stringer material finished to the dimensions illustrated. Lengths over 8 feet require truck shipment. Lengths to 8 Ft. ........... P/N 02-18400 ........ $1.45/ft. Add 20% for lengths over 8 feet.
T STRINGER STOCK
Balsa is the lightest commercial wood in the world, weighing less than 10 lbs./ cu.ft. Pound for pound, it is one of the strongest - both its stiffness and bending strength exceed White Spruce, Western Yellow Pine, Douglas Fir, White Oak and many other commercially used woods. It is easily cut, turned, carved, shaped, glued, sanded and finished, all with ordinary wood working tools and techniques. It can be shaped with abrasive wheels either wet or dry. It can be cut into extremely thin veneers. Almost any kind of coating will adhere to it. Meets specifications MIL-B-2747 and MIL-S-7998. Furnished as 2 thick boards, 3 ft. long from 3-6 wide. Material which may be glued together by the builder to make the required size pieces. 2 x 4 x 3 ft Pc................P/N 02-03500 ............$17.85/ea. ACTUAL SIZES OF BOARDS CAN VARY
BALSA WOOD
Flat, bonderized steel nails, brass plated to prevent rusting and cement coated to improve holding power. Manufactured to Federal Specification FF-N-105 (formerly AN301). Order by part no. Part No. AN301-20-2 AN301-20-3 AN301-20-4 AN301-20-5 AN301-20-6 AN301-20-8 Size Length Gauge 1/4 20 3/8 20 1/2 20 5/8 20 3/4 20 1 20 Price 1/4 Lb. 1/2 Lb. $3.11 $6.23 $2.94 $5.88 $2.96 $5.93 $2.74 $5.48 $2.50 $5.00 $2.48 $4.95 1 Lb $12.45 $11.75 $11.85 $10.95 $10.00 $9.90
AIRCRAFT NAILS
Reprint of Government Specifications MIL-S-6073 and MIL-P-6070. P/N 13-14900 .......................... $3.95
44
PLYWOOD
American-made structural aircraft-grade plywood is made of imported African Mahogany or American Birch veneers laminated in a hot press to hardwood cores of Poplar or Bass wood with waterproof glue. Will meet all requirements of specification MIL-P-6070, which calls for shear testing after immersion in boiling water for 3 hours. Far superior to many plywoods in which all plies are 1/16 thick and laminated in a cold press to make up the total thickness. Tests should be made on cold-press plywoods before use in aerobatic aircraft. Thickness Approx. MM. (.070) 1.5 (.100) 2.5 (.125) 3.2 (.190) 4.8 (.250) 6.4 (.312) 7.9 (.375) 9.5 (.437) 11.1 (.500) 12.7 1.5 2.5 3.2 90 Mahogany No. of Price Per Plies Approx. Wt. Part No.** 4 x 8 Sheet Sq. Ft. 3 6 Lbs. 02-189-$3.29 3 10 Lbs. 02-191-3.90 3 12 Lbs. 02-193-4.00 3-5 20 Lbs. 02-195-6.15 5 25 Lbs. 02-197-6.99 5 Lbs. 02-198-7.51 5 Lbs. 02-199-7.80 7 Lbs. 02-120-8.95 7 Lbs. 02-121-9.27 45 Mahogany 3 6 Lbs. 02-188-5.74 3 10 Lbs. 02-190-6.09 3 12 Lbs. 02-192-6.65 90 Birch Approx. Wt. 4 Price Per Part No.** x 8 Sheet Sq. Ft. 7 Lbs. 02-243-$3.04 12 Lbs. 02-244-2.77 15 Lbs. 02-245-2.82 24 Lbs. 02-246-6.12 30 Lbs. 02-247-7.46 30 Lbs. 02-251-8.05 30 Lbs. 02-266-8.30 30 Lbs. 02-267-9.56 30 Lbs. 02-260-9.74 45 Birch 7 Lbs. 02-248-5.31 12 Lbs. 02-249-4.74 15 Lbs. 02-250-5.19
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
In. 1/16 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2
4 x 8 Sheet $110.80 $132.70 $134.65 $207.95 $231.95 $243.95 $279.65 $267.90 $279.90 $214.80 $239.95 $234.60
4 x 8 Sheet $93.25 $95.25 $98.25 $199.50 $259.95 $269.95 $280.95 $355.95 $321.95 $167.60 $181.55 $190.40
*Domestic plywood is sold only in 2x4 (8 Sq.Ft.), 4x4 (16 Sq.Ft.), 2x8 (16 Sq.Ft.), and full 4 x 8 sheets. If ordering less than full sheet, compute cost based on price/sq.ft. shown in above table. ** The part numbers of full 4 x 8 sheets end with 80. For less than full sheets, the last two digits will change according to the size ordered. Change the last two digits in the part number to 10 for 4 x 4, 20 for 2 x 8 and 30 for 2 x 4. Example: 1/16 mahogany 90 is 02-18980 (4 x 8), 02-18910 (4 x4), 02-18920 (2 x 8) and 02-18930 (2 x4).
Quality Birch Aircraft grade plywood produced to AB/B grade on all thicknesses. German Lloyd GL-2 is available upon request; please contact us for details on how order GL-2. Thickness Half Sheet 2x4 Full Sheet 4x4 Plies Nom. Inch. mm Part No. Price Part No. Price 1/64 0.4 3 02-20250 $26.50 02-20200 $53.75 1/32 0.8 3 02-20350 $14.50 02-20300 $29.75 3/64 1.0 3 02-50050 $18.25 02-50000 $37.25 1/16 1.5 3 02-20450 $18.00 02-20400 $35.70 3/32 2.5 5 02-20550 $29.25 02-20500 $58.50 1/8 3 5 02-20650 $31.25 02-20600 $62.50 3/16 5 10 02-20750 $42.50 02-20700 $84.75 1/4 6 12 02-20850 $49.90 02-20800 $101.95 Corby Starlet 2MM x 48 x 48 ..................P/N 02-28050 ............ $46.80 1/4 Birch/Poplar 5ply, 45..........................P/N 02-27180 .......... $420.95 Okoume (o-KUE-me), also referred to as Gaboon, is an African hardwood widely used in Europe over the past century. Light pinkish brown in color, sometimes lustrous with variable interlocking grain, the rotary cut panel can be painted or finished bright. The natural durability of this species is extremely low and care must be taken to finish all surfaces, face and edges. Often recommended for use with epoxy saturation systems, the panel exhibits high strength to weight ratios. Face veneers are made from 1.3 mm thick A/B grade rotary cut veneer. Cores and crossbands are solid-joined and the panel glued with waterproof glue. Okoume panels are extensively used by race class boat builders, rowing shell builders and in various applications. Where its lighter weight, good bending properties and ease of finishing are a value, 5/32 thickness is used in the One Design Kit Aircraft and applicable to a wide variety of Homebuilt Aircraft, sold in 4x8 sheets. Wt. of 5/32 sheet is 8.8 lb. Wt. of 1/4 sheet is 28 lbs. Thickness varies from 4mm to 6mm. Can be cut down for shipping. Certified bs1088 4mm thick x 4 x 8 sheet .............. P/N 02-20100...........$69.50 6mm thick x 4 x 8 sheet .............. P/N 02-00076...........$99.85 The beautiful, pliable answer to shaped and curved construction problems. Lite Ply is distinguished by its even grain, virtually snow white appearance and unusual resilience. It is a true white wood, poplar and finishes uniformly, whether stained or painted. Supplied for over 50 years, Lite Ply has proven to be an excellent wood for industries where weight is a concern. Lite Ply has been proven to be a cost effective alternative to other light weight panels. 4 X 8 Sheet 1/8 3MM .................... P/N 02-00115 ...................... $36.50 4 X 8 Sheet 1/4 6MM .................... P/N 02-00116 ...................... $56.50
OKOUME PLYWOOD
Basswood meets MIL-P-6070 but is lighter and has more flexibility than Mahogany & Birch plywood, but has slightly less structural strength. Thickness 1/16 3/32 1/8 3/16 1/4 3/8 7/16 1/2 5/8 3/4 No. of Part No.* Plies 3 02-253-3 02-254-3 02-255-3 02-256-5 02-257-5 02-261-7 02-262-7 02-263-9 02-265-9 02-264-2x2 $15.75 $15.50 $16.75 $18.00 $30.75 $27.75 $32.75 $38.25 $42.00 $57.50 Price 2x4 4x4 $30.50 $61.50 $31.50 $63.50 $32.25 $65.00 $35.00 $70.50 $48.50 $97.50 $53.50 $106.95 $126.95 $126.95 $74.00 $147.95 $81.00 $192.95 $110.95 $221.95 4x8 $123.95 $127.95 $130.95 $141.95 $195.95 $215.95 $274.95 $297.95 $384.95 $444.95
NOTE: All sheets 4x8. All plies are basswood. Grain is 90. Part nos for full 4x8 sheets end with 80. For less than full sheets, the last 2 digits will change according to the size ordered. Change the last 2 digits in the part no to 60 for 4x4, 20 for 2x2 and 40 for 2x4. See example in domestic plywood table.
2X2 ............ P/N 2X4 ............ P/N 4X4 ............ P/N 4X8 ............ P/N
02-27220 ........ $36.00 02-27240 ........ $69.50 02-27260 ...... $138.95 02-27280 ...... $298.65
45
INSTANT GLUES
Quikfix BC 101 is a hand mixable, fast curing, general purpose epoxy putty stick that mixes in just one minute to provide fast repairs to many surfaces including metals, wood, glass, concrete, ceramics and numerous plastics. One hour after mixing, QuikFix BC 101 can be drilled, sawed, sanded, filed, tapped, machined, or painted. It comes in a handy concentric putty stick with he curing agent encapsulated in the contrasting color base material. The putty-like consistency eliminates drips and runs, producing no mess applications with no tools required for use. In order to achieve optimum adhesion, surfaces should be clean, dry and free of grease or dirt. Scuffing or sanding the surface prior to cleaning helps insure a good bond. Color: Gray (after cure). 3.5 stick .............P/N 01-00333 ...... $11.95 7 stick ................P/N 01-00332 ...... $13.95 Bond-Aide P-1500W is a wood epoxy putty compound that cures in minutes to form permanent repairs on woods, plaster, ceramics and many plastics with no shrinkage. For woodworking and hobby model use, Bond-Aide P-1500W is unique as it can be shaped to conform to the surface. After 30 minutes, it becomes part of the wood but is many times stronger. Like wood it is light in weight, can be drilled, sawed, nailed, carved, machined, sanded, stained and painted, all within 30 minutes. It is non-toxic and is quickly and safely readied for application without any mess. It will not drip or sag, and unlike conventional wood putties, P-1500W will not dry out, even after opening. Excellent for bonding wood to wood, wood to metal, and wood to glass or ceramics. P-1500W has a multitude of uses in aircraft restoration, rebuilding, and repair. 1 tube 2-part Bond-Aide P-1500W ........P/N 02-18650 ........$14.75/ea
NCF QUICK - Used with HOT STUFF, UFO Odorless THIN, SUPER T,
and UFO Odorless THICK., and with it you can do almost magical things. NCF Quick works in three ways to make HOT STUFF , SUPER T and SPECIAL T Easier, Faster, Stronger and able to bond some of the most unusual materials you can think of. P/N 01-00689 ..................$13.00
NCFM - Mild Formula accelerator for use with HOT STUFF, UFO
Odorless THIN, SUPER T, and UFO Odorless THICK., and with it you can do almost magical things. NCFM MAY MELT SOME EXPANDED FOAM PRODUCTS. 2oz. P/N 01-35700 ....................$7.50
NCF - An extremely fast acting accelerator for all instant glues. NCF
does everything NCFM will do, in a fraction of the time. NCF has an extraordinary on-part life. P/N 01-01041 ....................$8.50 SPRAYN CURE - FREE of all chlorinated and fluorinated solvents. 2 minute on-part life after the area is completely dry. Special Note: User must allow 50 to 60 seconds (at room temperature) for complete drying before bonding, white foam friendly P/N 01-01042 ....................$5.25
This is a higher viscosity ca for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker ca is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas including those with close fitting joints such as lamination Polyfix 11000 gap filling should be used. To prevent premature curing, don't spread the glue into a thin film, lay down a serpentine bead with about 1" separation on one surface, then assemble the parts, letting the pressure spread the ca out. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0) Description Part No. Price Polyfix 11000 Gap Fill 1/2 oz 01-01016 $4.75 Polyfix 11000 Gap Fill 1 oz 01-01017 $8.75 Polyfix 11000 Gap Fill 2 oz 01-01018 $12.75 Polyfix 11000 Gap Fill 8 oz 01-01019 $36.75
NCF-5M - The NCF Mild is a mild formula accelerator, capable of dramatically increasing cure time, but not quite as quickly as the NCF Hot. NCF Mild decreases the curing time of the glue and forces the glue to cure when it wouldnt otherwise. This accelerator is active for several minutes, so you can spray several pieces at once if you are making multiple bonds. NCF Mild and Hot are generally not suitable for use with white foam. NCF-5M is a 4.9oz bottle with a plastic spray pump. P/N 01-35750 ..................$11.50 SUPER SOLVENT - Ultra Solvent is a remarkable debonder and cleaner for any instant glue. Use it for hand clean-up, removes instant glue from most clothing and surfaces. Some fabric, colorings or materials may be affected, so test-patch on an inconspicuous place. P/N 01-35800 ....................$9.75 TOUGHEST GLUE ON EARTH
Gorilla Glue is known as the toughest glue on planet Earth. A high strength adhesive that quickly bonds wood, metals, stones, ceramics, and more. Gorilla Glue is a versatile, interior/exterior adhesive ideal for building projects. 8 oz. bottle. Benefits: 100% Waterproof Incredibly Strong and Versatile Stainable and Paintable Easily Sanded More Coverage A Long Open Working Time Dries Light Tan Non-toxic Acid-Free P/N 02-00101............$12.85
This low odor flexible thin ca is ideal for many applications. Low odor flexible does not turn brittle and remains clear, even if Accelerator. With Polyfix 10000 Accelerator it has superior shock resistance and still has good penetrating qualities and its application can be easier to control for ca and has a different, less irritating odor compared to regular ca's, but still can proven to be superior when bonding anodized aluminum. 1 fl. oz. MIL SPEC-A-46050-C. (CAS NO. 6606-65-1) P/N 01-01020 .........................$7.50
GORILLA GLUE
Flex gap clear rubber toughened can be used in applications where you do not want the adhesive to be seen it is still superior to standard ca.'s when esthetics's are important and a flexible bond is required this product is your best choice. It forms to soft urethane and vinyl plastic, and shock resistant bonds. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0) Description Part No. Price Polyfix 3000 Rubber Fill 1 0Z 01-01021 $6.75 Polyfix 3000 Rubber Fill 2 OZ 01-01022 $12.50
Reach in a small area where you need to do a repair. Can reach 5-1/2" or if you need to control small drops. Sold in boxes of 24. Description Part No. Price Non-Clog Applicator Regular Tip 01-01006 $21.75 Non-Clog Applicator Fine Tip 01-01007 $21.75
46
Will soften cured ca. If parts are bonded incorrectly or your fingers are stuck together a few drops of POLYFIX 6000 debonder. Will dissolve the ca in about a minute. Apply on bonded skin and roll apart fingers. Once unstuck, use Acetone to clean off softned ca then wash off with soap and water POLYFIX 6000 debonder will easily remove the adhesive residue. 1 fl. oz. (CAS NO. 68-12-2) P/N 01-01037 ......$4.50 Polyfix 14000 Thin Cyanoacrylate has a super thin viscosity that penetrate deep into cracks by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the ca around the edges of the seams at the moment cas cure they give off a vapor that can irritate the nose and eyes, so be prepared. Thin cas work very well on any type of material, form more than just a surface bond. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0) Description Part No. Price Polyfix 14000 Thin Cyanoacrylate 1/2 oz 01-01008 $3.95 Polyfix 14000 Thin Cyanoacrylate 1 oz 01-01009 $6.95 Polyfix 14000 Thin Cyanoacrylate 2 oz 01-01010 $12.75 Polyfix 14000 Thin Cyanoacrylate 8 oz 01-01011 $39.90 Its all a round ca for ceramics, glass, metal, rubber laminating, soft wood, hard wood. Water resistant. This ca is the best for most clear plastic including GEs Lexan when used with Polyfix 10000 Accelerator it will fill most voids it can be carved with a knife or razor blade and sanded to foam a finish indistinguishable from plastic its extra thick. Thickness makes it easy to work with most applications. MIL SPEC-A46050-C (CAS NO. 7085-85-0) Description Part No. Price Polyfix 9000 Extra Thick 1/2 oz 01-01012 $4.45 Polyfix 9000 Extra Thick 1 oz 01-01013 $7.45 Polyfix 9000 Extra Thick 2 oz 01-01014 $12.45 Polyfix 9000 Extra Thick 8 oz 01-01015 $34.95 Polyfix Thermal Fusion is a 3-part system that uses chemical reaction to heat the repair to 142F, fusing it to the parent part. This system repairs ABS, royalite, graphite, lexan, polycarbon, Kevlar, plexiglass, fiberglass and many other materials. The system combines Industrial cyanoacrylate glue, a catalytic filler, and an accelerator. May be used on speed fairings, wing tips, cowlings, glare shields, and more. Kits include Polyfix Industrial chemical, polydust, gloves, finger cots, fiberglass mat, protection hand cream, no mixing tools, and an easy to follow instruction manual. Zero Shrinkage. PLASTIC REPAIR KIT (SMALL)- Size: 1/4" x 1/8" x 30". 1/2oz. 14000 CA. Thin. 1/2oz 10000 Accelerator. 2 M/Grams Catalytic. 1-3" x 8" Fiberglass. 1/2oz Hand Cream. 1-Pair Latex Gloves. 6 Finger Cots. 1 Manual (33 Page w/words/Pictures) MIL SPEC-A-46050-C. (CAS NO. 7085-850). (CAS NO. 601-35-4). MIL-A-46050-C TYPE II A OR III A. (CAS NO. 90-97-8). (CAS NO. 64742-48-9) P/N 01-01045 ................$22.45 PLASTIC REPAIR KIT (MEDIUM) - Size: 1/4" x 1/8" x 60". 1 Manual (33 Page w/words/Pictures). 1oz 14000 CA. Thin. 4 M/Grams Catalytic. 1/2oz. Hand Cream. 1oz 10000 Accelerator. 1-3 x 12" Fiberglass. 1 Pair Latex Gloves. 10 Fingercots. G.S.A NATIONAL STOCK NO. POLYFIX. 1-LB 1800 NUMBER 8040-01-364-799. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0). (CAS NO. 601-35-4). MIL-A-46050-C TYPE II A OR III A. (CAS NO. 90-97-8). (CAS NO. 64742-48-9) P/N 01-00235 ................$34.75 PLASTIC REPAIR KIT (LARGE) - Size: 1/4" x 1/8" x 120". 1 Manual (33 Page w/words/Pictures). 2oz. 14000 CA THIN. 2oz 10000 Accelerator. 8 M/Grams Catalytic. 10" x 10" Fiberglass (mat). 1/2oz Hand Cream. 2 Pairs Latext Gloves. 20 Fingercots. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0). (CAS NO. 601-35-4). MIL-A-46050-C TYPE II A OR III A. (CAS NO. 99-97-8). (CAS NO. 64742-48-9) P/N 01-00236 ................$49.85 PLASTIC REPAIR KIT (X-LARGE) - Size: 1/4" x 1/8" x 600". 1 Manual (33 Page w/words/Pictures). 10 oz. 14000 CA Thin. 50 M/Grams Catalytic. 1oz. Debonder. 12 Pair Latex Gloves. 10 Piece Assortment of Sandpaper. 1 Pair Scissors. 10oz 10000 Accelerator. 18" x 18" Fiberglass. 1oz. Hand Cream. 50 Fingercots. 1 Sanding Block. MIL SPEC-A-46050-C. (CAS NO. 7085-85-0). (CAS NO. 601-35-4). MIL-A46050-C TYPE II A OR III A. (CAS NO. 99-97-8). (CAS NO. 64742-489). (CAS NO. 68-12-2). P/N 01-00237 ..............$292.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Apply a light fog of Polyfix 10000 accelerator and apply Polyfix 17500+ gap filling. Cures to a more flexible consistence for better shock absorption, when ever a larger amount of ca is to be used in such applications as saturating fiberglass or kevlar. Polyfix 17500+ gap filling eliminates the irritating fumes from the evaporation monomer that makes repeated use of ca unpleasant at times. MIL SPEC-A-46050-C. (CAS NO. 27816-23-5) Part No. 01-01026 01-01027 01-01028 Price $9.95 $17.95 $30.95
Description Polyfix 17500 Industrial Gap Fill 1/2 oz Polyfix 17500 Industrial Gap Fill 1 oz Polyfix 17500 Industrial Gap Fill 2 oz.
Polyfix 64000 carbon extra strength ca is a carbon toughened cynaoacrylate that forms superior shock resistant bonds on non-porus surface the black colored ca has added flexibility for the bonding carbonfiber and other advanced materials as graphite, polycarbon with honeycomb, normax aramid, graphite with aluminum honeycomb. MIL SPEC-A-46050-C (CAS NO. 7085-85-0) Description Part No. Price Polyfix 64000 Carbon Gap Cyanoacrylate 1/2 oz 01-01029 $5.95 Polyfix 64000 Carbon Gap Cyanoacrylate 1 oz 01-01030 $11.50 Polyfix 64000 Carbon Gap Cyanoacrylate 16 oz 01-01031 $173.95
The patented Thermal Process Catciyticaily (I.C. chemically) generates heat to 142 degrees fahrenheit and actualy thermal sets or fuses the repair to the Patent material. POLYFIX 10000 Accelerator POLYFIX 14000 Thin Cyanoacrylate (PJ 33) POLYDUST Catalytic filler By using these three products that was certified by Cessna Aircraft, U.S. Army Aviation Systems, Boeing Aircraft. (CAS NO. 601-35-4) Warning: If you use any other products with the POLYFIX polydust catalytic, AIRCRAFT SPRUCE AND SPECIALTY INC. AND REDAM/ RB INC. WILL NOT BE RESPONSIBLE FOR ANY ACCIDENTS Description Part No. Price Polyfix Polydust Catalytic 10M/MG 01-01032 $5.90 Polyfix Polydust Catalytic 1/2 PT 01-01033 $39.95 Polyfix Polydust Catalytic 1 PT 01-01034 $68.75
Non-flammable and less then 10% degrade when applied on ca's comparing to methanol and acetone acceletor that has 13/15% degrade. This accelerator allows ca's to quickly cure by enhancing the alkaline conditions during polymerization. POLYFIX 10000 in a spray bottle is normally used to cure the ca that flows from joints or cracks when parts are pressed together. Apply an additional bead of thick ca along seam and then curing with POLYFIX significantly in hances a crack's strength. For difficult to bond material, POLYFIX 10000 can be applied to one surface and ca to the opposite surface. When brought together, they will bond instantly. MIL SPEC-A-4605-C-TYPE II A OR III A. (CAS NO. 99-97-8). (CAS NO. 64742-48-9) Description Part No. Price Polyfix 10000 Accelerator 2 oz. 01-01035 $11.75 Polyfix 10000 Accelerator Refill 8 oz 01-01036 $18.50
47
ADHESIVES - GLUES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A Resorcinol Formaldehyde Adhesive capable of curing at room temperature and providing strong, durable, waterproof bonds. Comes in two parts, a liquid resin (part A) and a powered catalyst (part B). The liquid resin is an alcohol-water solution of a partially condensed resorcinol-formaldehyde resin containing a suitable reinforcing cellulosic filler. The hardener is a tan powder formulated from paraformaldehyde and a suitable cellulosic filler. Produces a cured glue line which is resistant to fresh water or salt water, most acids and organic solvents, and lubricating oils and greases. Being thermoset, the bond is resistant to elevated temps. and conversely, no loss in bond strength occurs at temperatures as low as 40F. These features make it advantageous for use as a general marine and aircraft use. It provides strong bonds between many wood and non-wood surfaces. These include treated woods, many plastics, natural and synthetic rubber, primed metal, leather, textiles, paper and fiber boards. Pint Kit (Pint A, 1/4lb B) ...........P/N 02-00036 ............ $23.50 Quart Kit (Qt A, 1/2lb B) ...........P/N 02-00037 ............ $33.85 Gallon Kit (Gal A, 2lbs B) .........P/N 02-00038 .......... $119.50 This is an exceptionally fine two-part white epoxy glue for homebuilt and experimental aircraft. It is based on a formula developed by Forest Products Laboratories. It is excellent not only for wood but for many other applications such as a metal to wood adhesive, metal to metal, just about anything with the exception of some plastics. It has been used by builders for many years with universal acceptance. Its low viscosity makes it very easy to work. Shelf life: Resin - more than 1 yr. Hardener - Indefinite. Qt Kit (1 qt. resin, 4oz hardener, Wt 4 lbs) ...... P/N 02-23400 .... $52.50 Gal Kit (1 gal resin, 16oz hardener, Wt.13 lbs) .... P/N 02-23500 .. $114.95 This new and improved Hysol glue replaces the old EA-9410-2 glue. EA-9430 has the same characteristics as the EA-9410, but has a 50 minute pot life instead of the 30 minute pot life of the EA-9410 at 77F. Used extensively in the Strojnik S2A sailplane and many other homebuilts. P/N 02-18600 .......... $69.75
CASCOPHEN
T-88 is a non-brittle structural adhesive which gives superior finished results even when used under adverse working conditions. T-88 will cure in temperatures as low as 35F which makes it an excellent choice for homebuilders living in colder climates. It is recommended by the builders of many types of homebuilt aircraft and is excellent for bonding aluminum, steel or wood. When fully cured, it is not affected by water, oil, gasoline and most other chemicals. 1/2 Pt Kit .. P/N 02-00046 ....$18.95 Pt. Kit ...... P/N 02-00047 ....$24.50 Qt. Kit ...... P/N 02-00048 ....$37.75 Gal. Kit.... P/N 02-00049 ..$103.85
With the Universal Cartridge any medium to high quality caulking gun will work just fine. When you evaluate the Universal Cartridge notice that without a mixture tip it is perfect for accurately measuring small batches of adhesive. This is something that is very hard to do in a mixing cup without generating a lot of waste. Of course when the cartridge is used with the mixing tip you get both accurate measuring and thorough mixing making large, continuous gluing jobs much easier with flawless products performance. Note: Mixer tube and cartridge cap sold separately (not included with T-88). P/N 02-00103 ..................$20.85
The static mixer tube attaches to the cartridge with a retaining nut which screws on securely to the REDIMIX gun. The mixer tip tapers to 1/8 but may be cut back to about 1/4. Very small quantities of epoxy may be prepared in this manner without any waste or added cost. P/N 02-90030 ..........................$1.94 A powdered, urea formaldehyde wood glue activated by mixing with water. Forms a bond stronger than the wood itself. Mets Fed. Spec. A-A-3052. Low VOC. 1 Lb ....................................P/N 0203 .......... $17.75 4.5 Lb .................................P/N 0204 .......... $61.50
WELDWOOD GLUE
Six10 Adhesive gives you the strength and reliability of a two-part WEST SYSTEM epoxy with the convenience of a single part product. Six10 is dispensed with a standard caulking gun. Non-sagging Six10 bonds tenaciously to wood, metals, fiberglass and concrete. It cures in temperatures as low as 50F. Working time is 42 minutes at 72F. Cures to a solid in 56 hours and will take high loads in 24 hours. Cure time is faster at warm temperatures and slower in cool temperatures. Cartridge holds 190 ml of resin and hardener. To use, replace the retaining nut and plug on the West System Six10 dispensing cartridge with the 600 Static Mixer that comes attached to the cartridge. Dispense mixed 2 part epoxy adhesive using a standard caulking gun. The efficient internal geometry of the 600 Mixer thoroughly blends resin and hardener in a short mixing length for good application control and a minimum of waste. Additional 600 StaticMixers are available in packages of two or twelve. Part No. 01-01069 01-01071 Description Epoxy Adhesive Cartridge Static Mixers Unit Size 190 ml 2 ea Price $19.85 $3.79
Commonly known as Scotch Weld, this two part epoxy structural adhesive will bond wood, metal, plastics and rubber. It has a pot life of nearly 2 hours after mixing, and a 24 month shelf life. Forms flexible yet very strong bonds. Color:Gray. 2 oz. kit ....................P/N 02-00045 .......... $43.80
Fastweld 10 A/B epoxy adhesive is a rapid-setting, two-component paste offering a convenient one-toone mixing ratio by volume or weight. Fastweld 10 A/B epoxy adhesive produces strong bonds in a very short period. It is especially suited for bonding small parts and for repair work. Pot life: 3-4 minutes at 77 F, Cure Time: 4 hours. Shelf life: 3 years. P/N 09-03454 ...... $8.95 3M EPX Pneumatic Mix Nozzle 9742 P/N 09-01372 ...... $2.25
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. Modulus of elasticity of 150,000 PSI. Much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with West System fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs.
Dual cartridge dispenser gun designed for use with 50ml style adhesive cartridges. P/N 09-03455 .... $44.50
Epoxy Adhesive...................................P/N 01-01162 ................ $20.19 650-K Epoxy Kit - This kit contains 4 fl. oz. G/flex 650 resin, 4 fl. oz. G/flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/ applicators, 2 12-cc syringes, 4 grams Adhesive Filler, 4 mixing cups, 1 pair disposable neoprene gloves, 4 alcohol cleaning pads and complete handling and repair instructions. ...........P/N 01-01161 ................ $29.98 655-K Epoxy Repair Kit - This kit contains 4.5 fl. oz. G/flex 655 resin, 4.5 fl. oz. G/flex 655 hardener (9 fl. oz. of mixed epoxy), 2 reusable mixing stick/applicators, 4 alcohol cleaning pads, 1 pair disposable neoprene gloves, 10 mixing palettes and complete handling and repair instructions. ...........................................P/N 01-01163 ................ $29.98
48
ADHESIVES
Manufactured by PTM & W Industries, Inc. ES6279 is a light grayish-tan two part adhesive that was developed specifically for difficult bonding problems involving similar or dissimilar materials. ES6279 provides excellent adhesion to a wide variety of materials such as aluminum, steel, brass, glass, ceramics, and wood. The mix ratio of 1 to 1 by weight or volume allows easy measuring, and the creamy, smooth viscosity allows easy, uniform application. The cured material has excellent strength as well as good resistance to weak acids, moisture, and weather. ES6279 has been used successfully for many years in a variety of general bonding uses as well as numerous production applications. Part Number 02-30015 02-30020 02-30025 02-30030 02-30035 02-30040 02-30045 02-30050 02-30055 Description 1/2 quart part A only 1/2 quart part B only ES6279 QUART KIT 1/2 gallon part A only 1/2 gallon part B only ES6279 GALLON KIT 1/2 pail part A only 1/2 pail part B only ES6279 PAIL KIT Wt. (lbs.) 3.0 3.0 6.0 12.0 12.0 24.0 60.0 60.0 120.0 Price $39.65 $36.75 $76.90 $106.95 $114.95 $220.95 $466.95 $418.95 $884.00
ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A unique feature of ES6228 is its ability to bond to slightly oily metal surfaces. This is useful in situations where the complete removal of residual mill oil on metal surfaces is not possible. The thin paste consistency of ES6228 wets the metal surface well, for good adhesion. This viscosity also provides some gap filling capabilities, so close-fitting joints are adequate, and matched-metal joints are not required. ES6228 has a 1:1 mix ratio, by weight or volume, for easy measuring. The white resin and black hardener combine to a smooth gray system that is easy to mix and apply, The cured material has very good properties, with high bond strength and elongation, for tough durable assemblies. ES6228-A ES6228-B Product Specifications Test Method Resin Hardener Color White Black Visual Viscosity,cps Thin Paste Thin Paste ASTM D2393 Specific Gravity 1.32 1.30 ASTM D1475 Density Lb./cu.in. .0477 .0470 ASTM D792 Mix ratio 100:100 by weight or volume PTM & W Quart Kit (4.5 lbs) .......................... P/N 01-00415........................$64.50 Gallon Kit (18 lbs).......................... P/N 01-00414......................$203.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ES6209 is a translucent, straw colored two component epoxy adhesive with a thick, liquid consistency. ES6209 is an excellent structural adhesive for use when good flow and surface wetting are required. Though pourable it has a controlled flow viscosity to minimize run-out from the adhesive joint. The 1 to 1 combining ratio by weight or volume makes it easy to measure and mix. The working time of over an hour provides plenty of time to coat and assemble the materials to be bonded. ES6209 has excellent adhesion to composite and metal parts typically used in kitplane construction. It bonds rigid foam, wood, ceramics, fiberglass and most metals with ease. When cured ES6209 provides tough, durable structural joints. Mix Ratio: 1 to 1 by weight or volume; Color: Translucent Amber, Mixed Viscosity: 45,000-55,000cps; Pot Life 4fl. oz. Mass: 60-90 min @ 77F; Cure Time @ 77F 18-24 hrs, @ 140F 2-3 hrs. Quart Kit ...........P/N 01-00295 ......... $48.50
Rotfix is an easy-to-use, low viscosity epoxy wood restoration system for consolidation of rotted, deteriorated, dried out, or spongy wood. It creates a strong water-resistant base for repair and restoration. Penetrates deep into wood for maximum strength. Use with Sculpwood for permanent structural repair or severely damaged wood. Kit includes 16 oz measuring/application bottle. 1.5 pint (24 oz) Kit ....................... P/N 02-90050....................$35.75/ea
Metalset A4 is a powerful epoxy adhesive that has been used for years by all branches of the U.S. Military as well as every major airline and auto manufacturer in the world. A4 is used for hundreds of industrial bonding applications and offers excellent adhesion to porous or non-porous surfaces. It can be applied to vertical surfaces without sagging and cures overnight with negligible shrinking. Once cured, A4 offers good machining qualities (sanding, drilling, tapping), and resists alkalies, dilute acids and solvents. Applications include stopping leaks in pipes, valves and tanks (i.e. car gas tanks), bonding like and unlike surfaces, filling metal joints, dents, etc., anchoring bolts in wood, concrete, and repairing metal surfaces. 6 oz tube - 16 hour cure time P/N 02-00220 ................ $13.75
Sculpwood is a moldable, carvable, sandable epoxy putty for replacement of damaged wood. It forms a strong, permanent bond to most rigid surfaces and can be sawed, nailed, carved, machined, sanded, stained, painted, and screwed. Porous, rotted, or deteriorate wood should first be treated with RotFix. 2 pint (32 oz) Kit ...........................P/N 02-90055 ....................$33.75/ea
Quick Cure is a 5 min. epoxy from System Three which bonds wood, metals, fiberglass, ceramics, plastics and glass. Excellent for making quick repairs, as it hardens in 5 minutes at room temperature. Mixing ratio: 1 to 1. Not recommended for applications in excess of 200F. Pint Kit ...................P/N 02-30060 .............$28.85 Quart Kit .................P/N 02-30065 .............$49.75
MetlWeld ia a 2-part, equal volume ratio, room temperature curing epoxy adhesive. MetlWeld develops strength earlier than other comparable 1:1 systems and may be used at temps. as low as 50F. Metal to be bonded should be freshly sanded and clean from grease, wax, oil and other contaminants. Allow 48 hours min. to cure and develop strength at 77F (longer at cooler temps.) before subjecting to stress. Bonds plain & anondized aluminum, glazed & unglazed ceramic; concrete; copper; glass; galvanized and stainless steel; neoprene rubber and most porous materials. Does not bond acrylic, polyethylene, polypropylene, polystyrene or vinyl plastics. 1/2 Pint Kit ............................ P/N 01-00406 ...................... $21.00 Pint Kit .................................. P/N 01-00407 ...................... $31.50 Quart Kit ............................... P/N 01-00408 ...................... $44.85
49
CM WP ME HA AP LG EP CS IN EL
3/4 O.D. (In.) 3/16 1/4 Wall Thickness .035 .028 .035 .049 .058 .065 .028 .035 .049 .058 .065 .095 .028 .035 .049 .058 .065 .083 .095 .035 .049 .065 .095 .120 .028 .035 .049 .058 .065 .083 .095 .120 .035 .049 .065 .120 .028 .035 .049 .058 .065 .095 .120 .156 .028 .035 .049 .058 .065 .095 .120 .156 .188 .035 .049 .058 .065 .083 .095 .120 .188 I.D. (In.) .131 .194 .180 .152 .134 .120 .256 .243 .215 .196 .182 .123 .319 .305 .277 .259 .249 .209 .185 .367 .340 .307 .247 .197 .444 .430 .402 .384 .370 .334 .310 .260 .492 .464 .432 .322 .569 .555 .527 .509 .495 .435 .385 .313 .694 .680 .652 .634 .620 .560 .510 .437 .375 .805 .777 .759 .745 .709 .685 .635 .500
4130 is a chromium-molybdenum general purpose alloy steel tubing that is weldable and is capable of developing good strength. It has been for years the standard of the aircraft industry. Tensile Strength: 90,000 PSI. The stock sizes listed below can be furnished in lengths from 1 foot to 12 feet. Large orders are filled in random lengths from 10 to 12 feet unless specific lengths are requested. No charge is made for cutting stock sizes of tubing to mailable length. Quotations furnished on unlisted sizes.
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
Wt. Per Ft. .0478 .0672 .0804 .1052 .1189 .1284 .0852 .1039 .1382 .1580 .1722 .2212 .1038 .1271 .1706 .1964 .2152 .2588 .2841 .1506 .2036 .2589 .3480 .4075 .1411 .1738 .2360 .2738 .3020 .3696 .4109 .4870 .1974 .2690 .3457 .5677 .1785 .2205 .3014 .3512 .3888 .5377 .6472 .7814 .2159 .2673 .3668 .4287 .4755 .6646 .8074 .9897 1.128 .3140 .4323 .5061 .5623 .7021 .7914 .9676 1.379 Part No. 03-00183 03-00250 03-00300 03-00400 03-00500 03-00510 03-00600 03-00700 03-00800 03-00810 03-00900 03-01000 03-01100 03-01200 03-01300 03-01400 03-01500 03-01600 03-01610 03-01700 03-01800 03-02000 03-02100 03-02200 03-02300 03-02400 03-02500 03-02600 03-02700 03-02710 03-02800 03-02900 03-03000 03-03100 03-03200 03-03400 03-03500 03-03600 03-03700 03-03800 03-03900 03-04000 03-04100 03-04110 03-04250 03-04300 03-04400 03-04500 03-04600 03-04700 03-04800 03-04900 03-05000 03-05300 03-05400 03-05500 03-05600 03-05700 03-05800 03-05900 03-06000 Price Per Ft. $4.45 $8.50 $2.60 $4.85 $13.50 $4.95 $7.75 $4.65 $5.25 $6.25 $8.38 $6.94 $5.25 $2.50 $3.45 $2.95 $3.50 $5.25 $5.75 $4.30 $6.50 $3.80 $7.25 $8.50 $4.80 $2.60 $3.15 $3.50 $3.85 $4.00 $6.50 $5.97 $8.25 $6.25 $9.25 $8.96 $6.25 $1.69 $4.15 $3.95 $4.20 $4.60 $4.95 $6.94 $5.75 $3.40 $3.95 $4.20 $4.70 $7.38 $5.95 $6.50 $9.50 $4.35 $4.05 $4.50 $5.15 $5.75 $6.25 $6.50 $9.87
O.D. (In.) Wall Thickness .028 .035 .049 .058 .065 .083 .095 .120 .156 .188 .035 .049 .058 .065 .095 .120 .035 .049 .058 .065 .083 .095 .120 .156 .035 .049 .058 .065 .095 .120 .188 .035 .049 .058 .065 .083 .095 .120 .188 .058 .065 .083 .095 .120 .156 .188 .049 .058 .065 .095 .120 .188 .250 .049 .065 .095 .120 .188 .120 .095 .250 .120 .120 I.D. (In.) .944 .930 .902 .884 .870 .834 .810 .760 .687 .625 1.055 1.027 1.009 .995 .935 .885 1.180 1.152 1.134 1.120 1.084 1.060 1.010 .938 1.305 1.277 1.259 1.245 1.185 1.135 1.000 1.430 1.402 1.384 1.370 1.334 1.310 1.260 1.125 1.509 1.495 1.459 1.435 1.385 1.312 1.250 1.652 1.634 1.620 1.560 1.510 1.375 1.375 1.902 1.870 1.810 1.760 1.625 2.010 1.81 2.000 2.260 2.510 Wt. Per Ft. .2907 .3607 .4977 .5835 .6491 1.0 .9182 1.128 1.406 1.630 .4074 .5631 .6609 .7359 1.045 1.288 .4542 .6285 .7384 .8226 2.132 1.172 1.448 1.823 .5009 .6939 .8158 .9094 1.299 1.609 2.383 .5476 .7593 .8932 .9962 1.256 1.426 1.769 2.634 .9707 1.083 1.10 1.552 1.929 2.447 2.885 .8902 1.048 1.170 1.679 2.089 3.136 2.249 1.021 1.343 1.933 2.409 3.638 2.730 1.933 6.008 3.050 3.370 Part No. 03-06110 03-06100 03-06200 03-06300 03-06400 03-06450 03-06500 03-06600 03-06700 03-06800 03-06900 03-07000 03-07100 03-07200 03-07300 03-07400 03-07500 03-07600 03-07700 03-07800 03-07810 03-07900 03-08000 03-08100 03-08210 03-08200 03-08300 03-08400 03-08500 03-08600 03-08700 03-08800 03-08900 03-09000 03-09100 03-09110 03-09200 03-09300 03-09400 03-09600 03-09700 03-00042 03-09800 03-09900 03-10000 03-10100 03-10200 03-10210 03-10300 03-10400 03-10500 03-10510 03-10600 03-10710 03-10800 03-10900 03-11000 03-00193 03-11100 03-11150 03-11206 03-11200 03-11210 Price Per Ft. $7.25 $2.60 $2.80 $2.80 $4.10 $5.75 $3.98 $6.50 $8.25 $12.75 $5.92 $4.98 $3.40 $4.30 $5.75 $6.97 $4.87 $5.25 $4.25 $3.84 $4.40 $4.63 $5.98 $9.50 $5.75 $6.75 $4.55 $4.55 $5.75 $8.25 $13.00 $6.00 $8.75 $4.95 $4.95 $4.95 $6.75 $9.94 $11.25 $11.00 $5.93 $6.75 $8.50 $9.89 $12.75 $12.50 $7.50 $8.98 $8.00 $6.75 $8.75 $13.95 $19.50 $10.00 $7.36 $9.75 $11.82 $18.75 $10.75 $14.50 $23.87 $11.97 $22.60
5/16
1-1/8
3/8
1-1/4
7/16
1/2
1-3/8
1-1/2
9/16
5/8
1-5/8
1-3/4 1-7/8 2
AV TO PS BV
7/8
Please call for price on any unlisted size. Discount of 10% for 100 ft. or more of the same part number.
Ordering tubing/bar by the foot. Add a dash number after part number to indicate length of tubing required. Ex: 3 ft required add -3, 03-00100-3.
We furnish complete 4130 tubing kits for a variety of aircraft designs including the Skybolt, Pitts Special, Acro Sport, Starduster, Osprey, and many more. The kits contain sufficient round, square, & streamline tubing to produce the pieces shown on our materials list for each design. We urge the builder to verify his own materials list against ours. Request kit list you require & current quotation. Enjoy big savings by purchasing a complete tubing kit for your aircraft at one time.
Prevents rust and corrosion inside aircraft tubing structures. Will climb tubing wall and spread over entire surface. Will penetrate and reveal small pin holes in a weld and in time, due to exposure, will congeal and seal the hole. Directions on label. One quart will treat two light aircraft fuselages. Quart........... P/N 03-14000 ........$26.00 Starter Kit - An assortment of 4130 tubing, rod and bar in short lengths to practice welding. At least 15 ft. of tubing in assorted sizes and wall thicknesses. Furnished subject to availability of cutoffs. ...................... ...................P/N 03-15900 ......$27.85
50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
reflected in the Major Minor Axis Axis 1.180 .500 1.349 .571 1.685 .714 2.023 .857 2.360 1.000 2.697 1.143 3.372 1.429
Seamless mechanical tubing may be used either statically or dynamically. Its close tolerance, good finish and dense structure make it ideal for parts such as shafts, bushings, bearings, etc. Tensile strength 80,000 PSI. Drill or ream for proper bolt fit. SPECIFY CUTTING INSTRUCTIONS FOR SHIPMENT O.D. 1/4 3/8 1/2 5/8 I.D. 1/8 1/4 3/8 1/2 Wall .065 .065 .065 .065 Part No. 03-16550 03-16700 03-16900 03-17100 Price/Ft. $4.50 $2.60 $1.88 $1.69
Wall (In.) Weight Per Ft. .035 .065 .035 .049 .065 .035 .049 .065 .049 .065 .035 .049 .065 .049 .065 .2213 .6055 .2808 .4234 .388 .3403 .4671 .6055 .5504 .7160 .4593 .6337 .8265 .9057 1.158
Part No. 03-12200 03-12350 03-12400 03-12500 03-12600 03-12700 03-12800 03-13000 03-13200 03-13300 03-13400 03-13500 03-13700 03-13900 03-13950
3/16 Diameter type 304 CD stainless steel rod. Used in new canard for Long-EZ as specified by RAF. P/N 03-26600 ...................... $2.70/ft.
Available in mild steel. 0.020 thick. 6-ft. length ........P/N 03-46600 .........$8.65
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
51
4130 SHEET
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* 3-Ft. lengths available at the half price of 6 lengths. 6 ft. lengths are subject to UPS oversize charges. Consider 3 ft. lengths which ship at cheaper rates 6 x 12 9 x 9 Part No. Price Part No. Price .025 03-21800 $1.56 03-21850 $2.85 .032 03-22510 $4.75 03-22515 $5.50 .040 03-22600 $3.45 03-22650 $3.90 .050 03-23000 $1.97 03-23050 $4.45 .063 03-23400 $5.25 03-23450 $6.75 .071 03-23800 $6.75 03-23850 $7.75 .080 03-24200 $6.25 03-24250 $8.50 .090 03-24600 $8.75 03-55500 $9.25 .100 03-25000 $7.25 ----.125 03-55300 $9.95 03-25370 $13.25 .190 ---03-25660 $16.25 .250 ----03-25850 $23.75 ** Wt. per 18 x 18 sheet. Less 10% discount on 6 Thickness (In.) This chromium-molybdenum alloy is one of the most widely used aircraft steels because of its combination of weldability, ease of fabrication and mild hardenability. It will respond to heat treatment to high strength levels and yet, in the annealed condition, it has adequate strength for many applications. Used for the manufacture of parts and components. Tensile strength 75,000-85,000 PSI. Furnished cold-rolled and oiled in sheet thicknesses of .025-.125 inch. Sheets of .190-.250 inch and greater thickness are hot-rolled, pickled and oiled. Sheared to sheet and strip sizes listed below. Subject to availability of normalized sheet, annealed 4130 sheet may be substituted.
This high quality welding rod is produced from vacuum melted material. This material has ultra-low levels of oxygen, hydrogen, and nitrogen and is extremely low in trace elements. This rod is cleaner than standard rods and is the best available for 4130 welding. .062 dia. 36 long. Appro. 32 units per pound. P/N 03-27600 .........$64.75/lb. 1/16 ................ P/N 03-27625 ........$12.50/lb. 3/32 ................ P/N 03-00118 ..........$9.90/lb.
For big-strength welds in steel plate, sheet, structural shapes, pipe and steel castings. Supplied in 36 lengths in sizes 1/16, 3/32 and 1/8. NO. 32CMS Recommended for 4130 steel structures for most satisfactory results. This rod is heat-treatable after welding. 1/16 Dia ........P/N 03-27000 ..... $7.80/lb. 3/32 Dia ........P/N 03-27100 ... $11.85/lb. 1/8 Dia. .........P/N 03-27200 ..... $5.50/lb. NO. 7 Used in general commercial welding and by many mechanics for non-heat-treated airframe repairs. 1/16 Dia........P/N 03-27300 ......$9.45/lb. 3/32 Dia........P/N 03-27400 ......$8.25/lb. 1/8 Dia..........P/N 03-27500 ....$11.75/lb.
WELD BRUSH
Stainless steel bristles set in curved wooden handle. Just right for cleaning welds. 1/2 Wide x 8 Long. P/N 03-26500 ........... $0.91 For Alumium Welding Rod, see page 56. For Welding Equipment, see pages 754-756.
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
52
ALUMINUM SHEET
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
2024T3
Alclad
6061T4
Bare
6061T6
Bare
6061-0
Bare
7075T6
Alclad
7075-0
Alclad
For 2x2 piece of aluminum sheet, take 2x4 price 2, and then add 15%. For 2x2 piece, change last two digits of P/N to 60. Thicknesses of .016, .020, .025, .032, and .040 can be rolled and boxed for UPS shipment with insurance coverage, but we cannot guarantee rolled sheets will lay flat without creasing when unpacked. Full sheets of heavier gauges or cut sheets exceeding 108 length plus girth (once down and once around) must be shipped by truck. Maximum sheet size for UPS shipment is 2 x 4. QUANTITY DISCOUNT SCHEDULE: 10% on 6-10 Full Sheets; 15% on 11-15 Full Sheets. May be assorted thicknesses and alloys. Write for quotation on larger orders. Heavy gauge 2024T4 aluminum plate available in .375, . 500 and .625 thickness. Indicate sheet size required.
12 Wide X 12 ft. (rolled for mailing). Sold in 12 ft. lengths only. P/N 03-30800 .....................$39.85 Ea. 18 Wide x 12 ft. (rolled for mailing). Sold in 12 ft. lengths only. P/N 03-30850 .....................$54.50 Ea.
Other widths available at proportionate cost plus shearing charge.
** Length of full sheet of .025 thickness is 10 ft. For 2x4 pcs. of 3003H-14 use 45 as last 2 digits of P/N (Ex: 03-34645)
5052H32 Aluminum alloy sheets for fabrication of fuel tanks. Available in full sheets (48x144) & 1/2 sheets (48x72) only, in .040 & .050 thicknesses. May be combined with other aluminum sheets for discount. See shipping specs above. .032 Thickness Full Sheet ...............P/N 03-30810 .......... $82.25 Half Sheet................P/N 03-30860 .......... $40.75 .040 Thickness Full Sheet ................P/N 03-30900 .......... $99.85 Half Sheet................P/N 03-30950 .......... $49.90 .050 Thickness Full Sheet ................P/N 03-31000 ........ $125.95 Half Sheet................P/N 03-31050 .......... $62.50
* 2B Finish
Material 301 SS 1/2 Hard Size 3 x .025 Weight/Lin. Ft.(Lbs) 26 Part No. 03-00062 Price ea. $31.75
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
53
ALUMINUM TUBING
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ROUND DRAWN ALUMINUM TUBING 2024T3
O.D. (In.) I.D. (In.) Wall Thickness Wt./Ft. (Lb.) .180 .035 .2081 1/4 .243 .035 .0366 5/16 .215 .049 .0487 .305 .035 .0449 .277 .049 .0602 3/8 .245 .065 .0755 .430 .035 .0612 .402 .049 .0829 1/2 .384 .058 .0970 .370 .065 .1061 .555 .035 .0775 .527 .049 .1060 5/8 .509 .058 .1234 .495 .065 .1367 .680 .035 .0938 3/4 .652 .049 .1288 .620 .065 .1670 .805 .035 .1423 .777 .049 .1530 .759 .058 .1777 7/8 .745 .065 .1979 .635 .120 .3398 .930 .035 .1250 .902 .049 .1754 .884 .058 .2028 1 .870 .065 .2295 .834 .083 .2866 1.180 .035 .1601 1-1/4 1.152 .049 .2213 1.120 .065 .3000 1-3/8 1.277 .049 .2448 1.402 .049 .2683 1-1/2 1.370 .065 .3519 1-3/4 1.250 .250 1.428 2 1.870 .065 .4743 Part No. 03-31600 03-31700 03-31800 03-32000 03-32100 03-32200 03-32500 03-32600 03-32700 03-32800 03-32900 03-33000 03-33100 03-33200 03-33300 03-33400 03-33600 03-33650 03-33700 03-33800 03-33900 03-34000 03-34100 03-34200 03-34250 03-34400 03-34500 03-34600 03-34700 03-00045 03-34800 03-34900 03-35000 03-35075 03-35200 Price Per Ft. $4.45 $6.75 $8.98 $4.97 $8.25 $10.25 $5.75 $8.00 $7.25 $6.50 $8.50 $5.75 $6.93 $8.25 $6.25 $6.75 $7.50 $6.43 $7.25 $10.37 $5.86 $24.95 $6.25 $6.92 $10.50 $7.75 $9.85 $6.20 $8.25 $8.92 $12.25 $12.00 $11.92 $26.30 $19.93
Sold in full 6-ft or 12ft lengths only. No charge for cutting to 8 ft or less for UPS shipment.
Rigid 5052-0 aluminum alloy tubing is used for low and medium pressure hydraulic systems, fuel lines and oil lines. This tubing will withstand a higher pressure than 3003-0 tubing.
O.D. (In.) I.D. (In.) 1/8 .069 3/16 .132 .152 1/4 .180 5/16 .242 .305 3/8 .277 .436 1/2 .402 .555 5/8 .527 .680 3/4 .652 .930 1 .902 Thickness .035 .035 .049 .035 .035 .035 .049 .035 .049 .035 .049 .035 .049 .035 .049 Wt./Ft. (Lb.) .0101 .0168 .0371 .0281 .0360 .0449 .0602 .0612 .0829 .0760 .1060 .0938 .1288 .1256 .1754 Part No. 03-39100 03-39200 03-39250 03-39300 03-39400 03-39500 03-39550 03-39600 03-39650 03-39700 03-39750 03-39800 03-39850 03-39900 03-39950 Price Per Ft. $5.95 $1.86 $3.80 $1.35 $1.60 $1.79 $1.65 $2.49 $2.60 $2.50 $4.95 $2.60 $3.60 $4.70 $4.98
Soft aluminum tubing for instrument air and vacuum lines, fuel and oil lines, and primer lines.
O.D. (In.) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 Wall Max. Working Thickness Pressure* (PSI) .025 1820 .028 880 .032 795 .035 630 .035 520 .035 390 .035 305 Part No. 03-40200 03-40300 03-40400 03-40500 03-40600 03-40700 03-40800 Price Per Ft. $0.36 $0.43 $0.51 $0.68 $0.76 $0.88 $1.21
3003-0 VERSATUBE
Sold in full 6-ft. or 12-ft. lengths only. No charge for cutting to 8 ft. or less for UPS shipment.Unlisted sizes of aluminum tubing available in full 12 lengths. No charge for cutting to 8 or less for UPS. Longer lengths shipped via truck. Ordering tubing/bar by the foot. Add a dash number after part number to indicate length of tubing required. Ex: 3 ft required add -3, 03-00100-3.
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
54
Extruded aluminum angle is produced by forcing a heated aluminum billet through a die of the proper shape by means of a hydraulic press. Our 90 aluminum extrusions have fillet radius as illustrated.
Size (In.) Wt./Ft. A x B x T 1/2 x 1/2 x 1/16 5/8 x 5/8 x 1/16 3/4 x 3/4 x 1/16 7/8 x 7/8 x 1/8 1 x 1 x 1/16 1 x 1 x 1/8 1 x 1-1/2 x 1/8 1-1/2 x 1-1/2 x 1/16 1-1/2 x 1-1/2 x 1/8 2 x 2 x 1/8 3-1/2 x 3-1/2 x 1/4 Part No. Wt. Per Ft. (Lb.) Price Per Ft 03-46800 03-46900 03-47000 03-47100 03-47200 03-47300 03-47400 03-47500 03-47600 03-47625 03-47675 .070 .095 .109 .238 .154 .282 .354 .229 .432 .581 2.050 $3.55 $4.90 $2.75 $6.90 $3.75 $4.15 $7.65 $5.35 $6.25 $9.90 $92.75
ALUMINUM ANGLE
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
No charge for cutting to 8 ft. or less for UPS shipment. Over 8 ft. shipped via truck. Special sizes available (12 foot minimum) If ordering only T3 or T4, please call 877-477-7823
Size (In.) Wt./Ft. Wt. Per Ft. Type Part No. Price Per Ft A x B x T (Lb.) 6061T6 3/4 x 3/4 x 1/16 03-00185 .106 $2.46 6061T6 3/4 x 3/4 x 1/8 03-47900 .200 $0.87 6061T6 1 x 1 x 1/16 03-00187 .150 $3.65 6061T6 1 x 1 x 1/8 03-48000 .270 $2.10 6061T6 1 x 3 x 1/8 03-48050 .581 $28.25 6061T6 1-1/4 x 1-1/4 x 1/8 03-00189 .350 $5.50 6061T6 1-1/2 x 1-1/4 x 1/8 03-48075 .390 $35.50 6061T6 1-1/2 x 1-1/2 x 1/8 03-48100 .430 $1.92 6061T6 1-1/2 x 1-1/2 x 3/16 03-48200 .625 $2.90 6061T6 1-1/2 x 1-1/2 x 1/4 03-48250 .831 $3.55 6061T6 1-1/2 x 2 x 1/8 03-48300 .506 $1.86 6061T6 1-3/4 x 1-3/4 x 1/8 03-48350 .490 $4.75 6061T6 2 x 2 x 1/8 03-48400 .470 $2.25 6061T6 2 x 2 x 3/16 03-48450 .850 $3.63 6061T6 2 x 2 x 1/4 03-48500 1.110 $4.40 6061T6 2 x 3 x 1/4 03-48550 1.400 $28.95 6061T6 2 x 2-1/2 x 1/4 03-48600 1.250 $7.25 6061T6 2-1/2 x 2-1/2 x 3/16 03-00007 .970 $7.47 6061T6 2-1/2 x 2-1/2 x 1/8 03-48650 .720 $2.85 6061T6 2-1/2 x 4 x 1/8 03-48675 .960 $17.80 6061T6 4 x 4 x 1/4 03-48680 2.28 $8.90 Standard lengths: 2024-12 and 20, 6061-25, 6063-16 (no fillet). No charge for cutting to 8 ft. or less for UPS. Many unlisted sizes available. Request quotation.
2024T3 Aluminum angles, formed from .063 sheet. Generous radius at bend. Used as supports in composite aircraft such as the VariEze. 1.5 x 1.5 x 12 Angle .................. P/N 03-48700 ... $4.35 pc
Unlisted sizes of aluminum rod and bar available in full 12 ft. lengths. No charge for cutting to 8 ft. or less for UPS. Longer lengths shipped via truck. If ordering only T3 or T4, please call 877-477-7823 Ordering tubing/bar by the foot. Add a dash number after part no. to indicate length of tubing req. Example: 3 ft required add -3, 03-00100-3.
Aluminum streamline strut tubing, 6061T6, anodized. Used for struts in American Eaglet sailplane. Major axis 2.697, minor axis 1.143, .049 wall. Available in 6 ft. lengths only. P/N 03-40000 .............. $99.95
IF MFG TEST REPORTS ARE REQUIRED THERE IS A $15.00 CHARGE PER ORDER. PLEASE INDICATE AT TIME OF ORDER
55
PIANO HINGE
MS20001P aluminum hinge is extruded. The closed hinge loops cannot be pulled apart. Furnished with hinge pin. Anodized finish. Part No.* Open Width Thickness Price/Length 3 Ft.* 6 Ft.* MS20257P1 3/4 .032 $4.95 $9.90 MS20257P2 1-1/16 .040 $8.50 $17.75 MS20257P3 1-1/4 .040 $5.50 $10.25 MS20257P4 1-1/2 .040 $5.25 $10.50 MS20257P5 2 .051 $6.95 $14.00 MS20001P3 1-1/4 .040 $30.75 $61.50 MS20001P4 1-1/2 .040 $27.85 $56.75 MS20001P5 1-3/4 .051 $29.50 $56.75 MS20001P6 2 .051 $32.50 $65.00 MS20257C1 3/4 .031 $7.65 $14.95 MS20257C2 1-1/16 .037 $9.00 $18.75 MS20257C3 1-1/4 .050 $11.75 $24.25 MS20257C4 1-1/2 .062 $12.00 $24.75 MS20257C5 2 .062 $16.75 $34.25
* Add -3 to part number for 3 ft. pc. and -6 to part number for 6 ft. pc. Example: MS20001P6-3 is 3 ft. pc. of MS20001P6 hinge. HINGE PIN ONLY Stainless Steel 089 Dia. x 6 ..................................P/N 03-49000 ......................... $3.95
UTP 306M Cadmium free, low temperature silver brazing alloy for high strength joints on stainless or copper. Exceptional for thin gauge applications such as tubing. Flux coated for easy use. 1/16 dia. ..........P/N 03-27565 .....$362.95/lb. UTP 1M High strength, machinable torch rod for steel, brass, bronze and other copper alloys. Easy to apply, high strength, and versatile all purpose brazing rod. 1/8 dia. ............P/N 03-27570 .......$21.25/lb.
BRAZING ALLOYS
Approximately 20 ft. Assorted sizes of 2024 and 6061 aluminum tubing, angle, rod, and bar P/N 03-40100 ..................$14.95 3/4x 3/4x1/8 .............P/N 03-38950 .........$2.75/ft. 1x1x1/8 ....................P/N 03-39050 .........$3.58/ft. 1-1/4x1-1/4x1/8........P/N 03-39150 .........$4.95/ft.
6063T 52 U CHANNEL
UTP 612 An all position mild steel coated electrode for arc welding. Operates on AC or DC current and can be welded by even the most inexperienced welder. 72,000 psi tensile strength, moisture resistant and conveniently packaged in 10 lb containers. 3/32 dia. ..........P/N 03-27575 .......$14.60/lb. 1/16 dia. ..........P/N 03-27580 .......$12.85/lb.
MAINTENANCE
Fabricated of .025 aluminum 3003H14 to size illustrated. Wt.12oz. per 10ft. length. Shipped via truck. No charge for cutting to 8 ft. or less for UPS shipment. 10 Ft. Length.............P/N 03-48900 .......... $14.25 Less 20% on 12 or more lengths. Please add $2.00 carton charge for trailing edge - this box insures safe UPS shipment.
TRAILING EDGE
UTP Unial Self fluxing aluminum torch rod that can be applied with even a butane torch. Low temperature, color matching and ideal for repairs to tubing. P/N 03-27585 .......$33.00/lb. For additional Welding Equipment see pages 754-756.
Rectangular stringers, 5/8 x 5/16 x .032 3003H14 aluminum. Wt. 11 oz./12ft. length. Shipped via truck. No charge for cutting to 8ft. or less for UPS shipment. 12 Ft. Length ............P/N 03-48800 ............ $6.95
Seamless copper tubing for primer, fuel and oil pressure lines. O.D. (In.) Wall Thickness Part No. Price/Ft. 1/8 .030 03-40900 $1.86 1/4 .030 03-41000 $2.45 5/16 .032 03-41100 $3.15 3/8 .032 03-41200 $3.75 1/2 .032 03-41250 $3.65 20% discount for full soft coils of 50 ft. of Copper Tubing.
COPPER TUBING
Fabricated from .020 2024T3 aluminum. Wt. 5 oz. per 8-ft. length. May be spliced to form longer stringers. 8-Ft. Length ......P/N 03-46500 .......... $4.45 Less 10% on orders for 12 or more.
2024T3511 2 X 1-3/4 T extruded aluminum. Price per foot. P/N 03-00093 ..................$39.75
Lead sheet per specification QQ-L-201, Grade B. 1/8 thick. Wt. 8 lbs./sq.ft. P/N 03-31500 .............. $59.65/ft. Half Sheet (24x 36, 48 Lbs.) P/N 03-31520 ................. $298.00 Full Sheet (36 x48, 96 Lbs.) ........... P/N 03-31540 ................. $543.00
LEAD SHEET
56
EVERYTHING IN PLASTICS
American made acrylic sheet Grade C to Specification LP-391 is unshrunk. When heated to forming temperature of 220-250F, it will shrink about 2.2% in length and width and will increase about 4% in thickness. When heated to a pliable state it can be drilled, sawed and machined. It has excellent resistance to weathering. It is less than half as heavy as glass and has good impact resistance. .060 or .080 thickness is generally used for side windows and .125 for windshields. Both sides are paper covered for protection. Sheet size: 48x96. Sold in 2x2 increments only. Order by part number (see table) Thickness Inch Weight Lb./Sq.Ft. .060 Clear .37 .080 Clear .49 .125 Clear .62 .125 Tinted* .77 .125 Tinted** .77 * *** Part No.*** 03-498 03-499 03-500 03-501 03-502 Price Per Sq. Ft. $2.50 $2.75 $2.80 $4.06 $4.58 #732 #732 #732 #736
ACRYLIC SHEET
3M STRIP CAULK - This black, nonhardening compound in 12 strips is the most satisfactory product for sealing windshields and windows. 61 strips per box, more than enough for an average, leakproof windshield installation. P/N 08578 .......................... $16.75/Box
3M WINDOW SEALANTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Smoke tint ** #2111 Green tint Order by basic part number and add last two digits according to dimensions of piece, as follows: 2x2 (4 Sq.Ft.) add 02; 2x4 (8 Sq.Ft.) add 04; 4x4; (16 Sq.Ft.), add 08; 4x8 (32 Sq.Ft.), add 10. Example: 2x4 .080 Clear is P/N 03-49904.
Dow Corning SILASTIC These 1-part RTV silicone rubber adhesive/sealants adhere to metals, glass, paint, ceramics, wood and most plastics. Form a tack-free skin in one hour & cure to a firm silicone rubber in 24 hrs. RTV (Clear), 4.7 Oz. Tube ........................... P/N 09-27800...$7.95 RTV (White), 4.7 Oz. Tube .......................... P/N 09-27810...$6.95 RTV (Black), 4.7 Oz. Tube ........................... P/N 09-27815...$6.95 High temp. (to 500F) Red RTV, 3oz.tube ... P/N 09-27900.$11.50
American made Kirex polycarbonate sheet (an equivalent to G.E. Lexan) is a very strong plastic which is guaranteed by manufacturer against breakage when used as a window for a 3 year period. It will scratch like Plexiglas, but will not break. Clear, masked both sides. Sheet size: 48x96. Sold in 2x2 increments only. Order by part number (see table) Thickness Inch Weight Lb./Sq.Ft. .060 .38 .080 .50 .093 .59 .125 .78 Part No.* 03-503 03-504 03-505 03-506 Price Per Sq. Ft. $2.28 $3.15 $3.48 $3.88
LEXAN
Sealing openings in modules and housings; adding mechanical stability to individual components; assembly of components on PWBs; sealing in and around wires and electrical leads; yoke assembly. Clear ...............P/N 09-02041 ................ $35.75 Gray................P/N 09-02042 ................ $35.50
* Order by basic part number and add last two digits according to dimensions of piece, as follows: 2x2 (4 Sq.Ft.), add 02; 2x4 (8 Sq.Ft.) add 04; 4x4 (16 Sq.Ft.), add 08; 4x8 (32 Sq.Ft.), add 10. Example: 4x4 of .093 is P/N 03-50508.
May be used to make inspection rings, grommets and shapes which will adhere to fabric with dope or fabric cement. Sheet size: 20 x 50. Thickness: .030. P/N 03-50700 .................. $39.90/Sheet Prepreg tape has an inherent waviness which can reduce the strength and stiffness of a laminate. Graphlite rod eliminates fiber waviness and unlike tape, it can be placed along any curved surface and retain fiber alignment. Graphlite can be used in layers to form building blocks for stiffeners, spar caps, longerons and other axially loaded parts. Components made with Graphlite offer tension strength on the lower wing surface and compression strength on the upper surface that are almost equal. In addition, a single layer of rods is as thick as 10 layers of tape, meaning fewer passes and less effort. Graphlite rods increase compression strength, reduce fabrication costs by 50%, can be laid on compound curves, and require no special storage. Available in two rod types: standard module (SM) which is 33-34 MSI and intermediate module which is 42 msi. Sold by the roll. Typical light aircraft requires minimum of 1000 ft. Graphlite rod. Rod Rod Tensile Strength P/N Price per roll Type Diameter IM 0.067 503 03-50706 $93.50 /100 ft. SM 0.125 503 03-50707 $16.93 /12 ft. SM 0.158 503 03-50708 $153.95 /100 ft. SM 0.063 785 03-50710 $84.60 /100 ft.
Nylon, a polyimide resin, is a light yet tough thermoplastic material. Its density is approximately . 041 lb./cu.in. It is a tough, resilient material with a low coefficient of frictionabrasion tests show that Nylon loses less material than do many metals, other plastics, and hard rubber. It can deform under load, then return to its original shape. Nylon retains its impact strength over a wide range of temperatures (-60 to 400F). It has good resistance to most chemicals. It can be easily machined on most standard metal working machines, power hacksaws, band saws, or circular saws. It is desirable to use a saw with a coarse tooth blade.
NYLON
NYLON PLATE
Thickness Wt. per Sq. Part No. (Inch) (Lbs.) Ft. 1/16 .39 03-51000 1/8 .77 03-51100 1/4 I.54 03-51200 1/2 3.07 03-51300 3/4 4.61 03-51400 1 6.15 03-51500 * SOLD BY THE SQUARE FOOT (12 Smaller pieces are available. Order as follows: 6 x 6 = 0.25 6 x 12= 0.50 12 x 12= 1 12 x 24= 2 12 x 36=3 Price/ Sq. Ft.* $6.70 $13.80 $20.60 $44.80 $61.50 $74.25 X 12)
Less 10% for 4 ft. lengths. Less 20% for full 8 ft. lengths. Furnish cutting instructions for UPS shipment.
57
EVERYTHING IN PLASTICS
CM WP ME HA AP LG EP CS IN EL AV
GLASS EPOXY ROD
Thickness (In.) 1/16 1/8 3/16 1/4 3/8 1/2 3/4 1 Commonly called Micarta, a trademark of Westinghouse. Laminated sheets, tube and rods are produced in many grades, sizes and colors. These laminates combine a base material - canvas, linen, paper, glass cloth or Nylon cloth, with a resin- phenolic, melamine, epoxy or silicone, under high heat and pressure to produce a new material with specific characteristics. These characteristics vary with the grade and its use.
DELRIN ROD
Delrin is a thermoplastic acetal resin. The most important attributes of Delrin are high mechanical strength and rigidity, fatigue endurance and high resistance to moisture, gasoline and solvents. This product contains Delrin resin. Delrin is a registered trademark of E. I. du Pont de Nemours & Co. Color: Natural. Sold by the foot. Diameter Part No. Price / Ft. Diameter 1/8 02-52018 $0.64 3/4 3/16 02-52316 $0.72 7/8 1/4 02-52014 $0.58 1 5/16 02-52516 $0.66 1-1/8 3/8 02-52038 $0.88 1-1/4 7/16 02-52716 $1.11 1-3/8 1/2 02-52012 $1.40 1-1/2 9/16 02-52916 $1.92 1-3/4 5/8 02-52058 $1.85 2
Used for precision machining and high strength applications. Sheet Size: 36 x 48. Sold in 6 x 6, 6 x 12, 12 x 12, etc. pieces only. Wt. /Sq . Ft(Lbs.) Part No. Price. Per Sq. Ft. .422 03-52400 $4.80 . 844 03-52500 $8.95 1.349 03-00111 $13.45 1.853 03-52600 $18.60 2.772 03-52700 $26.50 3.685 03-52800 $35.65 5.495 03-52900 $53.75 7.302 03-53000 $235.95 Used to provide high-strength close-tolerance bolt holes in wooden spars. Cut rod to spar thickness, drill and ream for proper bolt fit. Drill hole in spar for slip fit of rod, then bond in spar with epoxy cement. Produced in 4 ft. lengths. 5/8 dia. ......P/N 03-53100 ..........$8.25 /ft. 3/4 dia. .....P/N 03-53200 ..........$9.95 /ft.
Part No. Price/Ft. 02-52034 $2.90 02-52078 $4.30 02-52001 $5.50 02-52118 $7.25 02-52114 $7.00 02-52138 $11.25 02-52112 $11.50 02-52134 $12.50 02-52002 $16.50
Cut up to 1/4 thick acrylic by scribing and breaking with this cutting tool. Complete with instructions. P/N 03-54200 .................. $2.50
TO PS BV
G-10 Glass Epoxy Rod - 5/8 Dia. P/N 03-50900 .......$34.50 Ft. Other sizes available in 4-ft. lengths.
General Chemicals Disccoat 4220 is a CLEAR water resistant; water based peelable temporary protective coating for Aircraft windshields & windows which provides a long lasting durable protective layer tht protects form scratches and oxidation. Used for protecting canopies and windshields during construction. Discoat 4220 air dries quickly, leaving a tough, yet flexible coating that is easily removed and requires no other additional step. 4220 represents the ultimate in water-based removable coating technology. It is stabilized against brittleness and is not softened or penetrated by most waterbased compounds. 4220 is impregnated with transparent blue dye for easy visual inspection as well as identification and is non-staining and stable to 100 degrees Celsius. Approximate coverage: 35 sq. ft. per quart. May be applied by spray or brush. Minimum of 4 coats recommended for best results. Discoat 4220 Plexiglass Protector QT .......... P/N 03-00158 ........$23.75 Discoat 4220 Plexiglass Protector GL........... P/N 03-00159 ........$96.50
Clear, rigid Schedule 40 PVC pipe for sight gauges. Used in Quickie as fuel level gauge. Excellent resistance to gasoline. Nominal 1/4 pipe size (0.54 O.D., 0.33 I.D.) . P/N 03-54100 ....$1.86 Ft.
For easy removal of stubborn masking paper from plastic sheets. This worksaver also removes adhesive residue. Quantity Discount - 15% on 10 units on this page Quart ........................ P/N 03-55100 .......................$6.95 Gal. .......................... P/N 03-55105 ................... $23.50
UNMASK
Sprayable, clear compound specially formulated as a strippable, protective coating for acrylic sheet, flat and formed. Used for protecting canopies from scratches during construction. Coverage: Approx. 35 sq.ft. per quart. Caution: Spray Lat can be difficult to remove if left on for more than 1 year. Spray Lat Plexiglas Protector - Quart .......... 03-54900 ........ $23.95 Spray Lat Plexiglas Protector - Gallon ......... 03-55000 ........ $79.95
58
AN BOLTS
Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter A after dash number. For bolts with drilled head add letter H after AN number. See illustrated examples. The length of AN aircraft bolts is measured from under the head to the end of the shank. The grip is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout. Bolts are sold EACH ALL BOLTS Dash Nominal Grip No. Length Length AN3 Cadmium Plated AN3 (10-32) Drilled Price $0.51 $0.47 $0.49 $0.47 $0.52 $0.62 $0.49 $0.45 $0.58 $0.59 $0.57 $0.49 $0.62 $0.62 $0.62 $0.67 $0.64 $0.54 $0.75 $0.83 $0.71 $0.78 $0.63 $0.87 $1.12 $0.93 $0.70 $2.20 $1.77 $1.16 $1.42 $1.19 $2.50 $1.38 $1.86 $1.58 $12.95 $10.50 $9.80 $12.25 $10.90 Stainless AN3C (10-32) AN4 Cadmium Plated AN4 (1/4-28) Stainless AN4C (1/4-28) Undrilled A Price $0.96 $0.49 $0.72 $0.57 $0.59 $0.84 $0.74 $0.94 $0.87 $0.94 $1.11 $0.97 $0.93 $1.10 $1.45 $0.99 $1.10 $1.38 $1.08 $2.75 $3.75 $3.76 -
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Undrilled Drilled Undrilled Grip Drilled Undrilled Drilled A Price Price A Price Length Price A Price Price $0.10 $0.10 $0.10 $0.12 $0.12 $0.14 $0.18 $0.16 $0.19 $0.18 $0.28 $0.22 $0.24 $0.35 $0.29 $0.37 $0.35 $0.52 $0.54 $0.43 $0.48 $0.43 $0.47 $0.59 $0.64 $0.70 $1.29 $0.73 $0.72 $0.69 $1.08 $1.10 $1.24 $1.50 $1.49 $1.24 $1.46 $9.50 $8.75 $10.75 $10.62 $11.75 $11.95 $13.75 $0.82 $0.84 $1.17 $0.98 $0.99 $0.89 $0.98 $1.04 $0.89 $0.94 $1.14 $1.16 $4.40 $0.42 $0.38 $0.45 $0.47 $0.48 $0.57 $0.72 $0.98 $0.76 $0.85 $0.64 $0.82 $0.89 $1.08 $0.93 $1.14 $1.40 $1.82 $1.08 $3.75 $7.25 $1.65 1/16 1/16 3/16 5/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 1-11/16 1-13/16 1-15/16 2-1/16 2-3/16 2-5/16 2-7/16 2-9/16 2-11/16 2-13/16 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-9/16 3-11/16 3-13/16 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-9/16 4-11/16 4-13/16 4-15/16 5-1/16 5-3/16 5-5/16 5-7/16 5-9/16 $0.63 $0.53 $0.59 $0.68 $0.59 $0.58 $0.68 $0.58 $0.45 $0.69 $0.42 $0.52 $0.67 $0.74 $0.66 $0.54 $0.56 $0.72 $0.50 $0.80 $0.77 $0.98 $0.99 $1.14 $1.08 $1.03 $1.18 $1.45 $1.30 $1.70 $1.72 $3.65 $1.53 $1.83 $1.75 $1.95 $1.82 $5.50 $7.90 $9.67 $9.74 $8.50 $9.95 $9.68 $0.21 $0.15 $0.18 $0.14 $0.21 $0.23 $0.19 $0.23 $0.28 $0.29 $0.35 $0.33 $0.35 $0.38 $0.39 $0.39 $0.46 $0.47 $0.54 $0.58 $0.44 $0.59 $0.84 $0.69 $0.79 $0.90 $0.90 $0.87 $1.16 $1.25 $0.98 $1.31 $1.17 $1.47 $1.37 $1.25 $1.51 $2.93 $5.25 $9.68 $5.75 $9.50 $9.75 $9.74 $9.94 $7.75 $3.25 $0.83 $1.06 $1.23 $0.95 $0.83 $1.34 $1.08 $0.99 $1.28 $1.18 $2.90 $2.65 -
-3 -4 -5 -6 -7 -10 -11
15/32 17/32 21/32 25/32 29/32 1-1/32 1-5/32 1-9/32 1-13/32 1-17/32 1-21/32 1-25/32 1-29/32 2-1/32 2-5/32 2-9/32 2-13/32 2-17/32 2-21/32 2-25/32 2-29/32 3-1/32 3-5/32 3-9/32 3-13/32 3-17/32 3-21/32 3-25/32 3-29/32 4-1/32 4-5/32 4-9/32 4-13/32 4-17/32 4-21/32 4-25/32 4-29/32 5-1/32 5-5/32 5-9/32 5-13/32 5-17/32 5-21/32 5-25/32 5-29/32 6-1/32
1/16 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8
UNDRILLED
-15 -16 -17 -20 -21 -22 -23 -24 -25 -26 -27 -30 -31 -32 -33 -34 -35 -36 -37 -40 -41 -42 -43 -44 -45 -46 -47 -50 -51 -52 -53 -54 -55
Quantity discount on AN4 bolts - 15% discount on qty of 50-99 20% discount on qty of 100+
59
AN BOLTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Bolts are sold EACH ALL BOLTS Dash Nominal No. Length -4 19/32 -5 23/32 -6 27/32 -7 31/32 -10 1-3/32 -11 1-7/32 -12 1-11/32 -13 1-15/32 -14 1-19/32 -15 1-23/32 -16 1-27/32 -17 1-31/32 -20 2-3/32 -21 2-7/32 -22 2-11/32 -23 2-15/32 -24 2-19/32 -25 2-23/32 -26 2-27/32 -27 2-31/32 -30 3-3/32 -31 3-7/32 -32 3-11/32 -33 3-15/32 -34 3-19/32 -35 3-23/32 -36 3-27/32 -37 3-31/32 -40 4-3/32 -41 4-7/32 -42 4-11/32 -43 4-15/32 -44 4-19/32 -45 4-23/32 -46 4-27/32 -47 4-31/32 -50 5-3/32 -51 5-7/32 -52 5-11/32 -53 5-15/32 -54 5-19/32 -55 5-23/32 -56 5-27/32 -57 5-31/32 -60 6-3/32 Automatically sizes all AN bolts up to 5/8 diameter and 5 inches long. P/N 04-05400 ............................. $7.80 This new aluminum gauge measures just 3-3/4 x 5-7/8 to fit easily in a shirt pocket. Determines exact part numbers for AN 3 thru AN 8 diameter bolts thru 5 in length. P/N 04-05300 ............................. $7.90 AN bolt gauge deluxe heavy duty model measures diameter and length of AN bolts up to 8, 388 precision conversions. Fraction / decimal / millimeter equivalents, with 8 Inch and 20 cm metric rulers. 4 colors. Pocket size. PVC plastic 8-5/8 x 2-1/2 x .030 P/N 11-07726 ............................. $7.50
AN BOLT GAUGE
AN BOLT KIT
CONTAINS: AN6-16A (8 qty) AN6-12A (2 qty) AN4-15A (20 qty) AN8-13A (8 qty) AN6-10A (12 qty) AN8-33A (24 qty) AN733A (4 qty) AN9-17 (4 qty) P/N 04-01727 $97.00
Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. AN5 Cadmium Plated Stainless AN5 (5/16-24) AN5C (5/16-24) Drilled Undrilled A Drilled Undrilled A Price Price Price Price $0.66 $0.39 $6.95 $1.98 $0.74 $0.28 $3.80 $2.35 $0.46 $0.29 $8.75 $2.40 $0.72 $0.31 $3.45 $2.15 $0.77 $0.33 $2.40 $0.62 $0.37 $1.86 $0.68 $0.34 $5.25 $2.45 $0.63 $0.39 $2.43 $0.77 $0.46 $2.25 $0.71 $0.44 $4.95 $0.79 $0.49 $0.84 $0.46 $0.89 $0.42 $7.75 $0.75 $0.54 $3.50 $0.91 $0.75 $0.79 $0.55 $5.00 $0.87 $0.60 $0.76 $0.78 $4.25 $0.92 $0.61 $5.50 $0.94 $0.68 $12.75 $1.25 $1.04 $1.37 $0.94 $1.26 $1.29 $1.48 $1.08 $1.64 $0.80 $1.66 $1.38 $1.58 $1.70 $2.25 $1.42 $2.15 $1.91 $1.95 $1.53 $1.89 $2.40 $2.50 $1.75 $1.97 $2.55 $2.15 $2.20 $2.50 $2.10 $8.18 $5.92 $9.75 $8.75 $9.98 $9.97 $9.88 $9.87 $8.78 $10.75 $9.75 $9.69 $8.30 $9.80 $12.75 $16.75 $10.75 $9.90 AN6 Cadmium Plated Stainless AN6 (3/8-24) AN6C (3/8-24) Drilled Undrilled A Drilled Undrilled A Price Price Price Price $0.45 $0.98 $0.53 $2.45 $3.45 $0.80 $0.41 $4.40 $2.70 $0.73 $0.46 $2.10 $3.05 $1.04 $0.56 $3.45 $0.79 $0.59 $7.50 $3.25 $0.89 $0.56 $5.90 $3.85 $0.85 $0.61 $27.20 $3.60 $0.75 $0.69 $2.40 $4.20 $0.81 $0.72 $9.95 $4.98 $1.25 $0.77 $21.25 $2.80 $0.96 $0.74 $4.00 $0.87 $0.71 $1.12 $0.84 $0.97 $0.83 $0.89 $0.84 $1.09 $0.98 $1.12 $0.85 $0.88 $1.17 $1.13 $1.14 $1.22 $0.93 $1.61 $0.96 $1.86 $1.53 $1.99 $1.47 $2.25 $1.70 $2.65 $1.55 $1.92 $1.91 $2.55 $1.59 $2.15 $1.73 $2.40 $2.40 $2.58 $1.94 $3.85 $2.35 $2.80 $2.60 $3.00 $2.80 $2.98 $2.90 $3.39 $5.50 $11.62 $10.73 $11.75 $10.40 $11.50 $12.75 $10.90 $10.90 $11.75 $11.50 $10.75 $11.23 $9.82 $9.89 $10.93 $11.75 $10.93 $11.25 -
Grip Length 1/16 3/16 5/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 1-11/16 1-13/16 1-15/16 2-1/16 2-4/16 2-5/16 2-7/16 2-9/16 2-11/16 2-13/16 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-9/16 3-11/16 3-13/16 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-9/16 4-11/16 4-13/16 4-15/16 5-1/16 5-3/16 5-5/16 5-7/16 5-9/16
Grip Length 1/16 1/16 3/16 5/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 1-11/16 1-13/16 1-15/16 2-1/16 2-3/16 2-5/16 2-7/16 2-9/16 2-11/16 2-13/16 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-9/16 3-11/16 3-13/16 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-9/16 4-11/16 4-13/16 4-15/16 5-1/16 5-3/16 5-5/16 5-7/16
60
AN BOLTS
USE REFERENCE CHART
Bolt Size AN960 AN970 AN365 Flat Lg. Area Nylon Insert Washer Flat Washer Locknut AN310 Castle Nut AN380 Cotter Pin
TOBACCO BAGS
Cloth bags for holding hardware as it is removed from the aircraft. Set of 25.
CM WP ME HA
AN3 ....-10 .......... -3 ............ -1032......... -3 ... -2-2 or longer AN4 ...-416 ......... -4 ............. -428.......... -4 . -25-2 or longer AN5 ...-516 ......... -5 ............. -524.......... -5 ..............-25-3 AN6 ...-616 ......... -6 ............. -624.......... -6 ... -3-3 or longer AN7 ...-716 ......... -7 ............. -720.......... -7 ... -3-3 or longer AN8 ...-816 ......... -8 ............. -820.......... -8 .. -3-4 or longer
NOTICE - Aircraft Spruce & Specialty Company is committed to supplying only top quality aircraft grade hardware. In most cases we receive our hardware certified to applicable AN, MS, or NAS specifications from our suppliers, but on certain items, it is necessary for us to accept hardware without certifiable traceability in order to continue supplying that particular part number.
Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Bolts are sold EACH ALL BOLTS Grip Dash Nominal No. Length -5 23/32 1/16 -6 27/32 3/16 -7 31/32 5/16 -10 1-3/32 7/16 -11 1-7/32 9/16 -12 1/11/32 11/16 -13 1-15/32 13/16 -14 1-19/32 15/16 -15 1-23/32 1-1/16 -16 1-27/32 1-3/16 -17 1-31/32 1-5/16 -20 2-3/32 1-7/16 -21 2-7/32 1-9/16 -22 2-11/32 1-11/16 -23 2-15/32 1-13/16 -24 2-19/32 1-15/16 -25 2-23/32 2-1/16 -26 2-27/32 2-3/16 2-31/32 2-5/16 -27 -30 3-3/32 2-7/16 -31 3-7/32 2-9/16 -32 3-11/32 2-11/16 -33 3-15/32 2-13/16 -34 3-19/32 2-15/16 -35 3-23/32 3-1/16 -36 3-27/32 3-3/16 -37 3-31/32 3-5/16 -40 4-3/32 3-7/16 -41 4-7/32 3-9/16 -42 4-11/32 3-11/16 -43 4-15/32 3-13/16 -44 4-19/32 3-15/16 -45 4-23/32 4-1/16 -46 4-27/32 4-3/16 -47 4-31/32 4-5/16 -50 5-3/32 4-7/16 -51 5-7/32 4-9/16 -52 5-11/32 4-11/16 -53 5-15/32 4-13/16 -54 5-19/32 4-15/16 -55 5-23/32 5-1/16 -56 5-27/32 5-3/16 -57 5-31/32 5-5/16 -60 6-3/32 5-7/16 AN7 Cadmium Plated Stainless AN7 (7/16-20) AN7C (7/16-20) Drilled Undrilled A Drilled Undrilled A Price Price Price Price $1.52 $1.43 -$9.98 -$1.17 $2.50 $1.06 -$1.38 $1.79 $1.68 $2.00 $1.24 $2.75 $1.22 $2.55 $2.55 $3.30 $1.62 $2.20 $1.37 $1.62 $1.18 $1.98 $1.79 $2.40 $1.37 $2.50 $2.35 $2.60 $2.15 $2.85 $1.36 $2.75 $2.40 $2.55 $1.75 -$2.57 $2.90 $2.80 $2.90 $2.60 $2.39 $2.65 $3.15 $2.65 $3.50 $2.90 $3.10 $2.86 $3.85 $2.79 $4.36 $3.95 --$4.21 $4.65 $4.85 $4.40 $5.40 $4.55 $4.95 $4.00 $4.55 $4.75 $4.93 $4.89 $12.95 $13.70 --$13.95 $13.87 ---$13.75 -$14.93 -$13.50 $14.96 $13.94 AN8 Cadmium Plated AN8 (1/2-20) Drilled Undrilled A Price Price $1.98 $3.98 $1.45 -$1.77 $2.00 $1.52 $2.75 $1.55 $3.30 $1.55 $2.39 $1.93 $2.80 $2.00 $2.15 $1.62 $2.15 $2.18 $2.75 $1.74 $2.90 $2.25 $2.85 $2.60 $3.10 $1.89 $2.50 $2.10 $3.50 $2.75 $3.10 $2.50 $2.85 $2.50 $4.55 $2.95 $4.20 $2.50 $3.55 $3.20 $4.53 $2.75 $3.30 $3.20 -$3.23 $2.85 $2.60 $3.98 $3.40 -$3.60 $3.97 $3.97 $4.39 -$4.75 $3.95 $4.30 $5.75 $5.36 $4.95 --$6.50 -$17.86 $12.75 -$13.46 $15.95 $16.70 $12.88 --$17.62 $16.75 -$12.60 $16.50 $12.90 -$14.90 --
Grip Length 1/16 3/16 5/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 1-11/16 1-13/16 1-15/16 2-1/16 2-3/16 2-5/16 2-7/16 2-9/16 2-11/16 2-13/16 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-9/16 3-11/16 3-13/16 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-9/16 4-11/16 4-13/16 4-15/16 5-1/16 5-3/16 5-5/16
AN3 Ea. H4A ............... $0.59 H5A ............... $0.49 H6A ............... $0.47 H10A ............. $0.59 H12A ............. $0.48 H13A ............. $0.76 H15A ............. $0.59
AP LG EP CS IN EL AV TO PS BV
AN4 Ea. H3A ............... $0.54 H4A ............... $0.56 H5A ............... $0.64 H6A ............... $0.69 H7A ............... $0.46 H12A ............. $0.56 H13A ............. $0.65 H14A ............. $0.71 H16A ............. $0.59 H21A ............. $0.67 H26A ............. $2.05 H30A ............. $0.73 H32A ............. $1.35
AN5 Ea. H6A ............... $0.95 H12A ............. $0.69 H13A ............. $1.18 H16A ............. $1.73 H17A ............. $1.79 H20A ............. $2.00 H31A ............. $3.75 H33A ..............-------
AN6 Ea. H11A ............. $0.93 H16A ..............------H20A ............. $1.59 H31A ..............------H32A ............. $3.75 H34A ............. $2.95 H37A ............. $3.85 H40A ............. $4.45 H41A ............. $4.75 H43A ............. $5.50 H45A ............. $3.85 H46A ............. $5.75 H50A ........... $10.90
61
EYE BOLTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
NOMINAL LENGTH 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devices as a turnbuckle fork, a clevis or a cable shackle. Manufactured and plated in same manner as AN3 - AN8 bolts . Minimum tensile strength 125, 000 PSI . Eye bolts will be furnished with either drilled or undrilled shank subject to stock on hand. Add letter A after dash number for undrilled shank. AN42B SHANK 3/16 HOLE 3/16 THREAD 10-32 GRIP DRILLED PRICE UNDRILLED PRICE LENGTH PART NO. EACH PART NO. EACH 1/8 AN42B-4 $4.45 AN42B-4A $3.10 1/4 AN42B-5 $5.25 AN42B-5A 3/8 AN42B-6 $6.00 AN42B-6A $3.30 1/2 AN42B-7 $6.50 AN42B-7A $4.25 5/8 AN42B-10 $6.50 AN42B-10A $3.75 3/4 AN42B-11 $5.10 AN42B-11A $4.55 7/8 AN42B-12 $7.50 AN42B-12A $4.25 1 AN42B-13 $6.75 AN42B-13A $4.80 1-1/8 AN42B-14 $6.75 AN42B-14A $5.25 1-1/4 AN42B-15 $9.78 AN42B-15A $5.96 1-3/8 AN42B-16 $6.60 AN42B-16A $6.25 1-1/2 AN42B-17 $7.50 AN42B-17A $5.75 1-5/8 AN42B-20 $7.75 AN42B-20A $5.95 1-3/4 AN42B-21 $7.70 AN42B-21A $7.50 1-7/8 AN42B-22 $8.00 AN42B-22A $6.40 2 AN42B-23 $8.95 AN42B-23A $7.25 2-1/8 AN42B-24 $12.60 AN42B-24A $7.75 2-1/4 AN42B-25 $8.60 AN42B-25A $7.50 3-3/8 AN42B-26A $8.75 2-1/2 AN42B-27 $9.95 AN42B-27A $7.95 2-5/8 AN42B-30 $9.25 AN42B-30A $10.75 AN43B SHANK 1/4 HOLE 3/16 THREAD 1/4-28 DRILLED PRICE UNDRILLED PART NO. EACH PART NO. AN43B-4 $5.75 AN43B-4A AN43B-5 $4.95 AN43B-5A AN43B-6 $6.25 AN43B-6A AN43B-7 $6.50 AN43B-7A AN43B-10 $6.95 AN43B-10A AN43B-11 $8.75 AN43B-11A AN43B-12 $6.25 AN43B-12A AN43B-13 $8.50 AN43B-13A AN43B-14 $8.00 AN43B-14A AN43B-15 $7.80 AN43B-15A AN43B-16 $7.25 AN43B-16A AN43B-17 $10.75 AN43B-17A AN43B-20 $7.75 AN43B-20A AN43B-21 $8.90 AN43B-21A AN43B-22 $8.90 AN43B-22A AN43B-23 $9.40 AN43B-23A AN43B-24 $9.98 AN43B-25 $9.40 AN43B-25A AN43B-26 $9.95 AN43B-26A AN43B-27 $10.40 AN43B-30 $11.90 -
GRIP LENGTH 1/16 3/16 5/16 7/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 1-11/16 1-13/16 1-15/16 2-1/16 2-3/16 2-5/16 2-7/16 2-9/16
PRICE EACH $3.98 $4.55 $6.50 $4.95 $5.50 $5.50 $6.25 $6.25 $5.95 $6.25 $6.75 $5.80 $7.94 $8.75 $8.28 $8.75 $8.75 $10.50 -
AN44 AN44A (Undrilled) AN45 AN45A (Undrilled) NomiThread Thread Thread Thread nal Shank 5/16 Hole 1/4 Shank 5/16 Hole 1/4 Shank 5/16 Hole 5/16 Shank 5/16 Hole 5/16 5/16-24 5/16-24 5/16-24 5/16-24 Length Grip Length Drilled P/N Price Each Grip Length Drilled P/N Price Each Grip Length Drilled P/N Price Each Grip Length Drilled P/N Price Each
7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3
3/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 -
AN44-5 AN44-7 AN44-10 AN44-11 AN44-12 AN44-13 AN44-14 AN44-15 AN44-16 AN44-17 AN44-20 AN44-21 AN44-24 AN44-26 AN46
$8.25 $7.50 $49.87 $8.60 $7.80 $10.50 $9.98 $8.60 $10.75 $10.70 $11.50 $11.20 $13.25 $13.00 -
3/16 7/16 9/16 11/16 13/16 15/16 1-1/16 1-3/16 1-5/16 1-7/16 1-9/16 -
AN44-5A AN44-7A AN44-10A AN44-11A AN44-12A AN44-13A AN44-14A AN44-15A AN44-16A AN44-17A AN44-20A AN44-21A AN44-22A AN44-23A AN44-24A AN44-25A AN44-26A AN44-27A
$6.25 $6.75 $10.50 $7.28 $6.75 $6.90 $7.10 $8.50 $9.94 $9.25 $10.75 $10.75 $11.25 $10.00 $11.75 $11.25 $11.35 $12.60
AN45-7 AN45-10 AN45-11 AN45-12 AN45-13 AN45-14 AN45-15 AN45-16 AN45-17 AN45-20 AN45-23 AN45-24 AN45-26 AN45-27
$10.90 $8.95 $9.50 $9.97 $9.90 $10.60 $10.90 $11.50 $12.75 $12.75 $14.50 $13.90 $46.50
Nominal Shank 3/8 Hole 3/8 Length Drilled Grip Length Part No. 7/8 5/16 AN46-7 1 1-1/8 1-1/4 1-3/8 1-1/2 AN46-14 1-5/8 AN46-15 1-3/4 AN46-16 1-7/8 1-5/16 AN46-17 2 1-7/16 AN46-20 2-1/8 1-9/16 AN46-21 2-1/4 2-3/8 2-1/2 2-5/8 2-1/16 AN46-25 2-3/4 2-3/16 AN46-26 2-7/8 2-1/16 AN46-27 3 2-3/16 AN46-30
Thread 3/8-24 Price Each $8.20 $12.00 $12.50 $11.75 $13.80 $12.65 $14.50 $15.50 $16.30 $16.30 $18.25
AN46A (Undrilled) Shank Thread Hole 3/8 3/8 3/8-24 Grip Drilled Price Length Part No. Each AN46-14A $9.50 AN46-15A $11.60 1-5/16 AN46-17A $11.92 1-7/16 AN46-20A $11.75 AN46-22A $11.95 AN46-23A $12.60 2-1/6 AN46-25A $13.86 2-3/16 AN46-26A $13.90 -
ORDER ONLINE!
www.aircraftspruce.com
60,000 Parts! 24 Hour Access! Fast, Easy Navigation!
62
CLEVIS BOLTS
Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). Manufactured and cadmium plated in same manner as AN3 - AN8 aircraft bolts. Minimum tensile strength 125,000 PSI. Available with drilled or undrilled shank. Add letter A after dash number for undrilled shank. Prices fluctuate on clevis bolts.
Dash No. Grip 8 9 10 11 12 13 14 15 16 l7 l8 l9 20 21 22 23 24 25 26 27 28 29 30 31 3/16 1/4 5/16 3/8 7/l6 1/2 9/l6 5/8 11/16 3/4 13/16 7/8 15/16 1 AN23 Length Drilled Un-Drilled Grip 17/32 19/32 21/32 23/32 25/32 27/32 29/32 31/32 1-1/32 1-3/32 1-5/32 1-7/32 1-9/32 $1.08 $1.16 $0.93 $0.98 $0.97 $0.99 $1.38 $0.99 $0.97 $0.99 $0.72 $0.98 $1.00 $0.38 $0.47 $0.39 $0.45 $0.34 $0.52 $0.49 $0.59 $0.46 $0.44 $0.60 $0.76 $0.84 $0.80 $0.40 $0.63 $3.40 $4.50 --$0.53 $2.65 $2.55 $1.16 $3.30 $2.45 $5.50 ---$4.95 $6.84 3/16 1/4 5/l6 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 AN24 17/32 19/32 21/32 23/32 25/32 27/32 29/32 31/32 1-1/32 1-3/32 1-5/32 1-7/32 1-9/32 ---$0.32 $0.98 $1.21 $1.09 $0.97 $1.24 $1.06 $1.14 $1.15 $1.43 $2.10 $1.25 $1.93 $2.00 $0.59 $0.94 $0.65 $0.46 $1.48 $3.55 $1.32 $1.89 $0.49 $1.35 $1.10 $1.56 $0.85 $1.10 $0.98 ---$2.80 $6.25 $2.80 ------$1.06 $2.03 $3.95 $4.80 ---$7.95 ---1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 ---39/64 43/64 47/64 5l/64 55/64 59/64 63/64 AN25 ---$0.60 $8.75 $2.60 ---$7.95 $5.50 $6.50 ---------------$0.52 ---$2.20 ---------------------$7.90 ---------------------------------------------l/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1 ---39/64 43/64 47/64 51/64 59/64 63/64 1-3/64 1-7/64 1-15/64 AN26 ------------$3.40 $6.75 ---$7.50 ------------------------------------------$7.25 $1.93 ---------------------------------------------------------3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 ------------51/64 55/64 59/64 63/64 1-3/64 1-11/64 1-19/64 1-27/64 AN27 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Length Drilled Un-Drilled Grip Length Drilled Un-Drilled Grip Length Drilled Un-Drilled Grip Length Drilled Un-Drilled
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
55/64 $12.50
11/16 1-3/64
11/16 1-7/64 13/16 1-15/64 15/16 1-23/64 1-1/16 1-31/64 1-1/8 1-35/64 1-3/16 1-39/64 1-1/4 1-43/64 1-5/16 1-47/64 1-3/8 1-51/64 1-7/16 1-55/64 1-1/2 1-59/64 1-9/16 1-63/64 1-5/8 2-3/64 1-3/4 2-11/64 1-7/8 2-19/64 2 2-27/64 2-1/8 2-35/64
13/16 1-11/64 $6.95 15/16 1-19/64 $9.50 1-23/64 $2.28 1-1/16 1-27/64 $9.25 1-1/8 1-31/64 $10.75 1-3/16 1-35/64 1-1/4 1-39/64 1-3/8 1-47/64 1-7/16 1-51/64 1-1/2 1-55/64 1-9/16 1-59/64 1-5/8 1-63/64 1-11/16 2-3/64 1-13/16 2-11/64 1-15/16 2-19/64 2-3/16 2-35/64 ----------------------------------
1-11/32 $1.80
1-11/32 $0.54
1-1/16 1-13/32 $1.02 1-1/8 1-15/32 $2.45 1-3/16 1-17/32 $1.80 1-1/4 1-19/32 $2.40 1-5/16 1-21/32 $2.45 1-3/8 1-23/32 $6.25 1-7/16 1-25/32 $5.25 1-1/2 1-27/32 $4.85 1-9/16 1-29/32 $0.47 1-5/8 1-31/32 ---$0.49 $5.90 ----
1-1/16 1-13/32 $3.40 1-1/8 1-15/32 $3.55 1-3/16 1-17/32 $1.42 1-1/4 1-19/32 ---1-5/16 1-21/32 $1.37 1-3/8 1-23/32 $4.45 1-7/16 1-25/32 1-9/16 1-29/32 1-11/16 2-1/32 1-13/16 2-5/32 1-15/16 2-9/32 2-3/16 2-17/32 ------$4.65 $4.45 $4.45 ---1-1/2 1-27/32 $7.75 1-5/8 1-31/32 $2.20
1-1/16 1-27/64 $4.88 1-1/8 1-31/64 1-1/4 1-39/64 1-5/16 1-43/64 1-3/8 1-47/64 1-7/16 1-51/64 1-9/16 1-59/64 1-3/16 1-35/64 $6.95
1-1/2 1-55/64 $9.50 1-5/8 1-63/64 $13.75 1-11/16 2-3/64 $6.93 1-13/16 2-11/64 1-15/16 2-19/64 2-3/16 2-35/64 -----------
Non-corrosion-resistant cadmium-plated steel machine bolts. The appearance of these bolts can be of two types: on the more common type, the head and threads are cad but the grip appears silver due to being ground and greased. The second type is all cad and is manufactured to Revision 20 (April, 1990) of the military specification. Both are acceptable. Both are drilled. Cat. # AN173-5 AN173-6 AN173-7 AN173-10 AN173-11 AN173-12 AN173-13 AN173-14 AN173-15 AN173-16 AN174-3 AN174-4 AN174-5 AN174-6 AN174-7 AN174-10 AN174-11 AN174-12 AN174-13 AN174-14 AN174-15 .2500 28 UNF-3A .1900 32 NF-3A Dia. (inches) Threads/ inch Length (inches) .656 .781 .906 1.031 1.156 1.281 1.406 1.531 1.656 1.781 .469 .531 .656 .781 .906 1.031 1.156 1.281 1.406 1.531 1.656 Grip (inches) .250 .375 .500 .625 .750 .875 1.000 1.125 1.250 1.375 .062 .062 .188 .312 .438 .562 .688 .812 .938 1.062 1.188 Price $0.72 $0.89 $0.86 $0.96 $0.76 $1.12 $0.82 $0.87 $1.14 $0.97 ----------$1.25 $0.75 $1.06 $0.93 $0.91 $0.90 $0.98 $1.38 $1.18 Cat. # AN174-16 AN174-17 AN174-20 AN174-21 AN174-23 AN174-24 AN175-14 AN175-15 AN175-16 AN175-17 AN175-20 AN175-21 AN175-22 AN175-23 AN175-24 AN175-25 AN175-26 AN175-27 AN175-30 AN175-31 AN175-32 AN175-33 Dia. (inchThreads/inch es) Length (inches) 1.781 1.906 2.031 2.156 2.406 2.531 1.594 1.719 1.844 1.969 2.094 2.219 2.344 2.469 2.594 2.719 2.844 2.969 3.094 3.219 3.344 3.469 Grip (inches) 1.312 1.438 1.562 1.688 1.938 2.062 1.062 1.188 1.312 1.438 1.562 1.688 1.812 1.938 2.062 2.188 2.312 2.438 2.562 2.688 2.812 2.938 Price -----$0.99 $0.98 -----$1.36 ----------$1.07 $1.84 $1.88 $4.60 $8.75 $2.10 -----------------------------------$2.40 $2.95
.2500
28 UNF-3A
.3125
24 UNF-3A
63
64
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
65
HARDWARE KITS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN3-4 AN3-5 AN3-6 AN3-7 AN3-10 AN3-11 AN3-12 AN3-13 AN3-14 AN3-15 AN3-16 AN3-17 AN3-20 Also Included: NYLON INSERT LOCKNUTS ITEM # QTY. AN365-1032 .................... 52 AN365-428 ...................... 44 FLAT WASHERS ITEM # QTY. AN960-10 ........................30 AN960-10L ......................30 AN960-416 ......................30 AN960-416L ....................30 COTTER PINS ITEM # QTY. AN380-2-2 .....................125 AN3 QTY -4 ......................6 -5 ......................6 -6 ......................6 -7 ......................6 -10 .....................6 -11 .....................4 AN3
-5A ....................... 6 -6A ....................... 6 -7A ....................... 6 -10A ...................... 6 -11A ...................... 6 -15A ...................... 4
-4A ..................6 -6A ..................6 -10A .................6 -11A .................6 -13A .................4 -14A .................6
DRILLED KIT
102 PIECES
AN4 QTY -6 ........................ 6 -7 ........................ 6 -10 ....................... 6 -12 ....................... 6 -13 ....................... 6 -14 ....................... 4 AN5 QTY -6...................6 -10..................6 -14..................6 -15..................4 -16..................6 -17..................6
HOMEBUILDERS KIT
CADMIUM PLATED
629 PIECES AN BOLTS CONTAINS 4 EACH
DRILLED AN3-4A AN3-5A AN3-6A AN3-7A AN3-10A AN3-11A AN3-12A AN3-13A AN3-14A AN3-15A AN3-16A AN3-17A AN3-20A UNDRILLED
AN4-6 AN4-7 AN4-10 AN4-11 AN4-12 AN4-13 AN4-14 AN4-15 AN4-16 AN4-17 AN4-20
AN4-6A AN4-7A AN4-10A AN4-11A AN4-12A AN4-13A AN4-14A AN4-15A AN4-16A AN4-17A AN4-20A
66
HARDWARE KITS
ECONOMY AN BOLT ASSORTMENTS BOLT ASSORTMENT - UNDRILLED
Qty 10 10 10 10 10 10 4 4 4 4 4 4 4 4 4 P/N AN3-3A AN3-4A AN3-5A AN3-6A AN3-7A AN3-10A AN3-11A AN3-12A AN3-13A AN3-14A AN3-15A AN3-16A AN3-17A AN3-20A AN3-24A Qty 4 4 4 4 4 4 4 4 4 4 4 4 4 4 P/N AN4-4A AN4-5A AN4-6A AN4-7A AN4-10A AN4-11A AN4-12A AN4-13A AN4-14A AN4-15A AN4-16A AN4-17A AN4-20A AN4-24A Qty 4 4 4 4 4 4 4 4 4 4 4 4 4 P/N AN5-5A AN5-6A AN5-7A AN5-10A AN5-11A AN5-12A AN5-13A AN5-14A AN5-15A AN5-16A AN5-17A AN5-20A AN5-24A
CM WP ME HA AP LG EP CS IN
204-piece Undrilled Assortment ................. P/N 04-00105..........$51.00 Above with 44-Drawer Cabinet .................. P/N 04-00110........$100.95
204-piece Drilled Assortment .................P/N 04-00115 .............$120.95 Above with 44-Drawer Cabinet ..............P/N 04-00120 .............$170.95
EL AV TO
Washers & Cotter Pins For Drilled Bolt Assortment P/N 04-00140............. $8.50
Washers & Cotter Pins For Combined Assortment P/N 04-00145 .........$13.75
WASHER ASSORTMENTS
1,500 PIECES - STAINLESS Contains 100 each of the following: 10 AN960C & AN960CL 10 Nylon 10 MS35333 10 MS35338 P/N 04-00220 ............ $44.00
1,500 PIECES - CAD-PLATED Contains 100 each of the following: 6, 8 & 10 AN960 & AN960L 6, 8 & 10 Nylon Washer 6, 8 & 10 MS35333 6, 8 & 10 MS35338
WASHER ASSORTMENTS
PS BV
6, 6, 6, 6,
8 8 8 8
67
HARDWARE KITS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model No. Part No. FB46-02 04-01646 FB810-04 04-01647 FB810-08 04-01648 FB812-08 04-01649 FB1012-04 04-01639 FB1012-08 04-01640 FB-1013-08 04-01641 FB1214-06 04-01642 FB-1620-06 04-01644 FB1620-10 04-01645 FF303-01 04-01650 FF312-02 04-01651 FF435-1 04-01652 FF512-03 04-01653 FF520-10 05-02114 FF520-15 FF520-15 FF620-01 04-01654 FF730-03 04-01655 Hole I.D. 1/4 1/2 1/2 1/2 5/8 5/8 .6270 3/4 1 1 3/16 .252 1/4 .3765 3/8 3/8 .5020 5/8 100 100 100
SCREW KITS
1/2 100 600-Piece Screw Pack Flat Phillips - AN507C Machine Screws 100 100 100 6-32 x 1/2 8-32 x 1/2 10-32 x 1/2 Flat Phillips Sheet Metal Screws 100 100 100 6 x 1/2B 8 x 1/2B 10 x 1/2B AN526 Machine Screw, Truss Phillips 100 .......................... 4-40 100 .......................... 6-32 100 .......................... 8-40 100 .......................... 8-32 100 ........................ 10-32 100 ........................ 10-32 AN507 100 CSK Machine Screw, FP 100 .......................... 6-32 x 1/2 100 .......................... 8-32 x 1/2 100 ........................ 10-32 x 1/2 Flat Washer AN960 100 ................. 6 100 ................. 8 100 ............... 10 Nylon Washers 100 ................. 6 100 ................. 8 100 ............... 10 x x x x x x 1/2 1/2 3/8 1/2 1/2 3/4 Sheet Metal Screw, Truss Phillips 100 ............................... 4 x 1/2 100 ............................... 6 x 1/2 100 ............................... 8 x 1/2 100 ............................. 8 x 1/2B 100 ............................. 10 x 1/2
Steel plated ..............P/N 04-00180 ......................... $31.25 Stainless ..................P/N 04-00185 ......................... $46.75 1/2 600-Piece Screw Pack Truss Phillips - AN526C Machine Screws 6-32 x 1/2 8-32 x 1/2 10-32 x 1/2 Truss Phillips Sheet Metal Screws 100 100 100 6 x 1/2A 8 x 1/2A 10 x 1/2A
Steel plated ..............P/N 04-00190 ....................... $24.00 Stainless ....................P/N 04-00195 ....................... $34.25 1/2 900-Piece Screw Pack
The entire contents of 600-piece pack shown above plus the following:
AN507C 100 CSK Flat Phillips Machine Screws 100 6-32 x 1/2 100 8-32 x 1/2 100 10-32 x 1/2 Steel plated.............. P/N 04-00205 ....................... $34.75 Stainless ................... P/N 04-00210 ....................... $54.00
Stainless Kit .................. P/N 04-00295 .........$117.95 Steel Plated Kit............. P/N 04-00296 .........$107.95
Oillite bronze bushings are highly heat resistant, ductile, conformable and corrosion resistant. Hole Flange Flange Price Length O.D. O.D. Thickness Each 3/8 1/4 1/2 3/64 $0.25 5/8 1/2 7/8 1/8 $0.63 5/8 1 7/8 1/8 $1.26 3/4 1 1 1/8 $1.62 3/4 1/2 1 1/8 $0.74 3/4 1 1 1/8 $0.95 .8150 1 1-1/16 5/32 $2.15 7/8 3/4 1-1/8 5/32 $0.77 1-1/4 3/4 1-1/2 3/16 $2.30 1-1/4 1-1/4 1-1/2 3/16 $4.15 5/16 3/16 7/16 1/16 $0.23 .3775 1/2 15/32 1/16 $0.39 7/16 1/2 1/2 1/16 $1.44 .5030 5/8 5/8 3/32 $0.56 1/2 3/8 5/8 1/16 $0.44 1/2 1/4 5/8 1/16 $0.32 .6270 1/2 7/8 1/16 $0.59 3/4 5/8 1 3/32 $1.40
AN526C Machine AN507C Machine Truss Phillips 100 CSK, Flat Phillips Sizes 6-32, 8-32, 10-32 Qty. Length 100 .................................... 1/2 50 ...................................... 5/8 25 ...................................... 3/4 25 ......................................... 1 Qty. ............................. Length 100 .................................... 1/2 50 ...................................... 5/8 25 ...................................... 3/4 25 ......................................... 1
Sheet Metal 100 CSK, Flat Phillips Sizes 6, 8, 10 Qty. Length Qty. Length 100 .................................... 1/2 100 .................................... 1/2 50 ...................................... 5/8 25 ...................................... 3/4 25 ......................................... 1
68
HARDWARE KITS
NUT-COTTER PIN ASSORTMENTS
CAD-PLATED COTTER PIN KIT
400 PCS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
50 ................................ 1/8 x 1 100 ......................... 1/16 x 1/2 25 .............................. 5/32 x 2 100 ......................... 5/64 x 1/2 25 .............................. 3/16 x 2 100 ......................... 3/32 x 1/2 P/N 04-00155 ...........................$11.50
Qty. Part No. 25...................... 4-40 50 ..................... 6-32 50 ..................... 8-32 50 ................... 10-32 25 .................. 1/4-28
100 ......................... 1/16 x 1/2 100 ......................... 5/64 x 1/2 100 ......................... 3/32 x 1/2
100 ......................... 1/16 x 1/2 100 ......................... 5/64 x 3/4 100 ............................ 3/32 x 1 50 ............................. 1/8 x 3/4
69
HARDWARE KITS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
700 BOLTS - 50 Sizes, individually packaged. AN3, AN4 and AN5 bolts in lengths from 3/8 to 2-3/4 with drilled and undrilled shanks, in quantities selected to accommodate popular usage. Furnished with a 44-drawer storage cabinet. An exceptionally fine value. P/N 04-00200 ........$277.95
Part No. Qty. Length 3/16 Dia., Undrilled Shank AN3-3A 10 3/8 AN3-4A 15 1/2 AN3-5A 25 5/8 AN3-6A 25 3/4 AN3-7A 12 7/8 AN3-10A 30 1 AN3-11A 30 1-1/8 AN3-12A 30 1-1/4 AN3-13A 20 1-3/8 AN3-14A 20 1-1/2 AN3-15A 20 1-5/8 AN3-16A 20 1-4/3 AN3-17A 20 1-7/8 AN3-20A 12 2 3/16 Dia., Drilled Shank AN3-5 15 5/8 AN3-6 20 3/4 AN3-7 20 7/8 AN3-10 20 1 AN3-12 10 1-1/4 AN3-15 10 1-5/8 AN3-20 8 2 AN3-24 8 2-1/2 1/4 Dia., Undrilled Shank AN4-5A 24 5/8 AN4-6A 24 3/4 AN4-7A 24 7/8 1/4 Dia., Undrilled Shank AN4-10A 24 1 AN4-11A 12 1-1/8 AN4-12A 12 1-1/4 AN4-13A 12 1-3/8 AN4-14A 12 1-1/2 AN4-15A 12 1-5/8 AN4-16A 12 1-3/4 AN4-17A 12 1-7/8 AN4-22A 6 2-1/4 AN4-24A 6 2-1/2 AN4-26A 6 2-3/4 1/4 Dia., Drilled Shank AN4-6 10 3/4 AN4-7 10 7/8 AN4-10 10 1 AN4-12 10 1-1/4 AN4-16 6 1-3/4 AN4-20 6 2 5/16 Dia. Undrilled Shank AN5-6A 6 3/4 AN5-10A 8 1 AN5-12A 6 1-1/8 AN5-16A 6 1-3/4 5/16 Dia. Drilled Shank AN5-7 6 7/8 AN5-14 6 1-1/2 AN-17 6 1-7/8 AN5-24 6 2-1/2
3500 SCREWS - 55 Items, individually packaged.A good working assortment of standard screws including truss head, 100 flat head and structural type, washer head, 100 flat head sheet metal screws for use with Tinnerman countersunk washers, truss head sheet metal screws, both sharp and blunt point, & brass instrument screws. 44-Drawer cabinet Included. P/N 04-00800 .....................$322.95
PART NO. QTY. SIZE AN 526 Truss Hd Screw, Phillips AN526-632R6 100 6-32 x 3/8 AN526-632R8 100 x 1/2 AN526-632R10 100 x 5/8 AN526-632R12 100 x 3/4 AN526-832R6 100 8-32 x 3/8 AN526-832R8 100 x 1/2 AN526-832R10 100 x 5/8 AN526-832R12 100 x 3/4 AN526-1032R8 100 10-32 x 1/2 AN526-1032R10 100 x 5/8 AN526-1032R12 100 x 3/4 AN526-1032R16 50 x 1 AN507 Screws 100 C snk Flat Head Phillips MS2469326 100 6-32 x 3/8 MS24693S28 100 x 1/2 MS24693S29 100 x 5/8 MS24693S10 100 x 3/4 MS24693S31 100 x 7/8 MS24693S48 100 8-32 x 3/8 MS24693S50 100 x 1/2 MS24693S51 100 x 5/8 MS24693S52 100 x 3/4 MS24693S54 50 x 1 MS24693S58 25 x 1-1/2 MS24693S272 100 x 1/2 MS24693S273 100 x 5/8 MS24693S274 100 x 3/4 MS24693S276 50 x 1 MS24693S280 25 x 1-1/2 Brass Instrument Screws Round Head Phillips AN515B6R12 25 6-32 x 3/4 AN509 Structural Screws 100C snk Flat Head Phillips MS24694S5 25 8-32 x 1/2 MS24694S7 25 x 5/8 MS24694S9 25 x 3/4 MS24694S50 25 10-32 x 1/2 MS24694S52 25 x 5/8 MS24694S54 25 x 3/4 Washer Head Structural Screws AN525-832R8 25 8-32 x 1/2 AN525-832R10 25 x 5/8 AN525-1032R8 25 10-32 x 1/2 AN525-1032R10 25 x 5/8 AN525-1032R12 25 x 3/4 Sheet Metal Screws 100C snk Flat Head Phillips NAS548P-6 100 #6 x 3/8 NAS548P6-8 100 x 1/2 NAS548P6-10 100 x 5/8 NAS548P8-8 100 #8 x 1/2 NAS548P8-10 100 x 5/8 Sheet Metal Screws, Truss Hd B #4R x 1/4 100 Phillips #4R x 3/8 100 Blunt Point #4R x 1/2 100 #6R x 3/8 100 #6R x 1/2 100 #6R x 5/8 100 #8R x 1/2 100 #8R x 3/4 100 Sheet Metal Screws, Truss Hd A #4R x 1/2 200 Phillips #6R x 1/2 200 Sharp Point
2000 WASHERS, 700 COTTER PINS - 31 Items, individually packaged.A combination of flat washers in steel and anodized aluminum, regular and light weight, large-area washers, internal locking type, Tinnerman countersunk washers and six useful sizes of cotter pins. 26 Drawer hardware cabinet included. P/N 04-00300 .........$139.95
Part No. Qty. Size Steel, Regular Flat AN960-6 100 #6 AN960-8 100 #8 AN960-10 250 3/16 AN960-416 200 1/4 AN960-516 100 5/16 Steel, Light Flat AN960-6L 100 #6 AN960-8L 100 #8 AN960-10L 100 3/16 AN960-416L 100 1/4 AN960-516L 50 5/16 Anod. Alum. Regular Flat AN960PD10 50 3/16 AN960PD416 50 1/4 Anod. Alum. Light Flat AN960PD10L 50 3/16 AN960PD416L 50 1/4 Steel, Large Flat AN970-3 25 3/16 Steel, Large Flat AN970-4 14 1/4 AN970-5 11 5/16 Steel, Internal Lock MS35333-37 50 #6 MS35333-38 50 #8 MS35333-39 50 #10 MS35333-40 50 1/4 MS35333-41 50 5/16 Tinnerman Countersunk A3236-012-24A 100 #6 A3135-017-24A 100 #8 A3235-028-24A 100 #10 Cotter Pins Part No. Qty. Size MS24665-132 225 1/16 x 1/2L MS24665-134 200 1/16 x 3/4L MS24665-136 200 1/16 x 1L MS24665-283 50 3/32 x 3/4L MS24665-285 13 3/32 x 1L MS24665-360 12 1/8 x 2L
1000 NUTS - 29 Items, individually packaged. Nuts have been carefully selected to include every commonly used type in aircraft assembly - Self-locking, castle, plain hex, Pal, Tinnerman and all-metal two-lug anchor nuts not found in other hardware assortments. 26-Drawer Cabinet Included P/N 04-00900......................$337.95
AN315-4 25 1/4 x 28 AN315 -5 25 5/16 x 24 Check Nuts AN315-3 25 10-32 AN316-4 25 1/4 x 28 Palnuts MS27151-7 25 10-32 MS27151-13 25 1/4 x 28 MS27151-16 25 5/16 x 24 Tinnerman Nuts, Flat Type #1777-6Z-1 50 #6 #1778-8Z-1 50 #8 #1779-10Z-1 25 #10 Tinnerman Nuts, U Type #1784-6Z-1 50 #6 #A1932-8Z-1 50 #8 Two Lug Anchor Nuts K1000-08 50 8-32 K1000-3 50 10-32 K1000-4 25 1/4 x 28
PART NO. QTY. SIZE Elastic Stop Nuts AN365-632A 25 6-32 AN365-832A 25 8-32 AN365-1032A 75 10-32 AN365-428A 50 1/4 x 28 AN365-524A 25 5/16 x 24 All Metal Stop Nuts MS21042-3 75 10-32 MS21042-4 25 1/4 x 28 Castle Nuts AN310-3 50 10-32 AN310-4 50 1/4 x 28 AN310-5 14 5/16 x 24 Shear Castle Nuts AN320-3 12 10-32 AN320-4 12 1/4 x 28 AN320-5 12 5/16 x 24 Plain Hex Nuts AN315-3 25 10-32
Heavy-duty small parts organizer cabinets. The see-thru clear plastic drawers measure 1-1/4 x 2-3/4 x 5-3/4. The plastic cabinets are black. Furnished with adjustable drawer dividers. 16 drawer is white plastic. CABINETS PORTABLE ORGANIZERS 16-Drawer ..04-01464 ..$25.85 12-62 compartments . 04-01468 . $23.50 26-Drawer ..04-01465 ..$36.75 11-46 compartments . 04-01469 . $33.25 44-Drawer ..04-01466 ..$49.75 64-Drawer ................. 04-01467 . $51.85 Lg Dividers (25)40-501 ..$8.75 Lg Dividers (6)........... 04-02039 ... $6.25 Sm Dividers (16) ....... 04-02037 . $11.50
HARDWARE CABINETS
70
AIRFRAME NUTS
Fabricated from steel & cadmium plated per QQ-P416, Type II, Class 2. AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye bolts and studs. The slots in the nut accommodate a cotter pin for safety purposes. The thinner AN320 castellated shear nut, with half tensile rating of the AN310 nut, used with clevis bolts & threaded taper pins which are subject to shearing stress only. AN310, AN320 Thread Cotter Pin Dash Size Size No. -3 -4 -5 -6 -7 -8 -9 -10 -12 10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 AN380-2-2 AN380-3-3 AN380-4-4 AN380-4-5 AN310 AN320 AN320C Cad AN310C Cad StainPlated Stainless Plated less Nuts Nuts Each Nuts Price $0.51 $1.08 $0.47 $1.10 $0.79 $1.50 $0.75 $0.97 $0.94 $1.17 $0.87 $1.12 $0.97 $1.70 $0.96 $1.17 $1.62 $3.38 $1.35 $0.84 $1.63 $4.45 $1.26 $2.70 $3.65 --$1.79 $6.45 $4.95 --$2.27 $4.70
$4.43 --$5.50 $6.25
Coarse Thread - Use brass type for instruments. AN340 AN340C AN340B Thread Dash# Cad-Plated Stainless Brass Price Price Price 4-40 -4 $0.11 $0.23 $0.51 6-32 -6 $0.05 $0.22 $0.29 8-32 -8 $0.05 $0.28 $0.19 10-24 -10 $0.07 $1.65 $0.27 AN350 WING NUTS Fabricated from carbon steel and cadmium plated per specification QQ-P416A, Type II, Class 3. Tensile strength 50,000 PSI. A .070 hole is drilled in one wing for safety wire.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Dash No. Thread SizePrice Each Dash No. Thread Size Price Each -632 3-32 ---4 1/4-28 $1.49 ---832 8-32 ---5 5/16-24 $1.82 -1032 10-32 MS27151 engine nuts replace AC356 Pal nuts. They are stamped from 1050 spring steel and cadmium plated per QQ-P-416A, Type II, Class 2. Thread Price Dash Thread Price Size Each No. Size Each 10-32 $0.49 -19 3/8-24 $0.13 1/4-28 $0.18 -21 7/16-24 $0.35 5/16-24 $0.11 -24 1/2-20 $0.25
Fabricated from steel and cadmium plated per QQ-P-416, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same high tension load as the AN310 castle nut. It requires an auxiliary locking device such as a check nut or lock washer. AN316 hex check nuts can carry half the tension load of the AN315 nut. They are used as a locking device for plain nuts, set screws, rod ends, etc. Order by AN number. Add R or L after dash number for right-hand or left-hand thread. Example: AN3165L is a thin check nut with 5/16-24 left-hand thread. AN315 -640 -3 -4 -5 -6 -7 -8 -9 Price Ea. R L $0.38 $0.78 $0.06 $0.45 $0.09 $0.34 $0.11 $0.46 $0.17 $0.66 $0.62 $2.18 $0.46 --$2.53 --Thread Size 6-40 10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20
9/16-18
Price Ea. R L None None None None $0.09 $0.36 $0.13 $0.49 $0.15 $0.53 $0.37 $0.63 $0.44 $1.23 $1.95 ---
Manufactured to standard castle or shear nut specifications with a nylon insert added for positive safety. Use it throughout the control system. Should the cotter pin used with castle nuts be overlooked, the nut cannot work loose. The nylon insert will act as a stop nut. Dash Thread Price Dash Thread Price No. Size Each No. Size Each -6 3/8-24 $1.87 -3 10.32 $1.24 -7 7/16-20 $2.65 -4 1/4-28 $1.56 -5 5/16-24 $1.75
Heat treated, cadmium plated steel with dry film lubricant applied. Self-locking. Standard temp. to 450F. Thread Size 6-32 8-32 10-32 1/4-28 NAS No. 679-A06 679-A08 679-A3 679-A4 Part No. 04-00143 04-00144 04-00146 04-00147 Part Price Thread NAS Size No. No. Ea. $1.33 5/16-24 679-A5 04-00148 $0.69 3/8-24 679-A6 04-00149 $0.38 7/16-20 679-A7 04-00154 $1.37 Price Ea. $1.88 $3.40
MS17826 Nylon Hex Nut. Self-Locking Nut, Castellated, Hexagon, 250 Deg.F, A Thin, Non-Metallic Insert Material- Alloy Steel, Finish - CAD Per QQ-P-416 Type II. Steel Dash# 3 4 5 6 7 8 Thread A Dim B Dim Price Size 10-32 .367-.376 $1.66 1/4-28 .173-.203 .430-.439 $1.62 5/16-24 .492-.502 $1.84 3/8-24 .553-.564 $2.25 .204-.234 7/16-20 .679-.690 $2.99 1/2-20 .235-.265 .741-.752 $3.20 Price Each $1.14 $2.15 $2.55
Use these solid brass cap nuts to attach instrument panels to stud-type shock mounts. Give the panel an attractive, finished appearance and do not introduce magnetic interference. Thread Price Thread Price Part No. Size Ea Size Ea AC1032 10-32 $0.45 AC632 6-32 $0.26 AC1428 1/4-28 $1.37 AC832 8-32 $0.26 Surplus SS 8-32 Acorn Nut Cap ................. P/N 04-01479 ..............$0.34 Part No.
Heres an easy way to put steel threads in wood, plastic, or particleboard. Just drill a hole to fit the barrel, insert tee nut, and hammer in the locking prongs until the base of the tee nut is flush with the surface. Right-hand thread.
8-32 10-32 1/4-20 1/4 5/16 7/16 04-02056 04-02057 04-02058 $0.23 $0.28 $0.28
71
The AN363 and MS21042 all-metal stop nuts are designed for use in high temperature installations (up to 450F). The MS21042 nuts are shorter than the AN363 nut but develop the MS21042 same tensile strength. Fabricated from carbon steel and cadmium plated per specification QQ-P-416C.
AN363 CAD Price AN363C Stai- Price Thread MS21042 Price Plated Dash No. Each nless Dash No. Each Size Dash No. Each -632 $0.28 -632 $1.47 6-32 -06 $0.35 -832 $0.31 -832 $1.20 8-32 -08 $0.39 -1032 $0.35 -1032 $1.12 10-32 -3 $0.29 -428 $0.41 -428 $1.37 1/4-28 -4 $0.37 -524 $0.41 -524 $2.40 5/16-24 -5 $0.92 -624 $0.52 -624 $2.55 3/8-24 -6 $0.88 -720 $1.39 ----- 7/16-20 -7 ---820 $1.23 ----- 1/2-20 -8 ---918 $3.40 ----- 9/16-18 -9 ---
Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. Use 3/32 dia. rivets with nut sizes 632, 832, 1032 and 428. Use 1/8 dia. rivets with 524 and 624.
ANCHOR NUTS
K1000
MS21047,NAS680S, NAS1023A
MK1000
MS21069, NAS697N
friction grip on the threads of the bolt and holds securely. The AN364 (thin) stop nut is for use in structural applications where the bolt is loaded primarily in shear or in any application where the AN365 tensile strength of the regular height AN365 is not MS21044 NAS1021N required. Cad stop nuts are furnished to military specifications. Insert color designates manufacturer only. Thread Size 4-40 4-40 632 8-32 10-24 10-32 1/4-28 Price Ea. AN364 AN365 $0.26 --------- $0.31 $0.32 $0.19 $0.11 $0.12 --$0.29 $0.13 $0.09 $0.13 $0.10 Dash No. Thread Size Price Ea. AN364 $0.33 $0.67 $1.22 $1.09 $1.42 $1.50 $2.10 AN365 $0.15 $0.26 $0.86 $0.98 $1.55 $1.42 $2.50
-524A 5/16-24 -624A 3/8-24 -720A 7/16-20 -820A 1/2-20 -918A 9/16-18 -1018A 5/8-18 -1216A 3/4-16
NA17
MS21080, NAS1025N
K2000
MS21051, NAS682A, NAS1025A
MK2000
MS21071, NAS696A
All-Metal Anchor Nut Price Each Dash No. MS21051 MS21071 (Full Size) (Miniature) L06 $0.82 $0.78 L08 $0.67 $0.57 L3 $0.58 $0.65 L4 $0.99 $1.19
Anchor Nut, Dimpled Standard Size K1100-0 ................. 6-32 Thread ............. P/N 04-01724............... $1.95 K1100-08 ............... 8-32 Thread ............. P/N 04-01725............... $0.78 Anchor Nut, One Leg, Dimpled, Standard size MS21053-L08 ........ 8-32 Thread ............. P/N 04-01726................$0.98
NA5
MS21081 NAS1027N
K3000
CORNER NUTS
Size 8-32 10-32 1/4-28 Anchor Nut MS21055L08 MS21055L3 MS21055L4
F5000 MS21059 Two-Lug Nut Price Ea. ----MS21059L06 $0.94 MS21059L08 $0.78 MS21059L3 $0.72 MS21059L4 $1.08
F2000 MS21061 One-Lug Nut Price Ea. MS21061-04 $2.15 MS21061L06 $1.38 MS21061L08 $0.79 MS21061L3 $0.83 MS21061-04 $1.81
72
TINNERMAN FASTENERS
These speed nuts are self-locking steel fasteners. Locking action is derived from the force exerted by the two arched prongs against the root of the screw thread and by the spring tension of the prongs and base. The combined forces of the thread lock and spring tension provide a vibration proof fastening. Speed nuts retain their spring tension and may be used repeatedly without losing their self-locking effectiveness. Suitable for B-type Sheet numerous non-structural applications. Finish: Phosphate-coated with three coats of olive Metal Screw drab paint. Important: Speed nuts for aircraft are designed to fit standard AN530AN531 type B sheet metal screws only. Do not use pointed type A sheet metal screws with aircraft Speed nuts. There is a difference in root diameter and thread pitch. Screw lengths: B type sheet metal screws have a blunt taper at the end. To be certain the fastener prongs grip on the full root diameter, the screw should protrude two to three threads beyond the prongs. See the illustration. Used to replace threaded nuts, lock washers, and spanner washers; weigh less than other types of self-locking aircraft fasteners. Can be applied faster, easier, and are vibration resistant. Provide maximum holding power at minimum cost per fastener. Turned-up ends prevent scoring of surfaces. Use with type B tapping screws.
Cage type. Permit mounting of aircraft instruments from the front of the panel. No charge in panel or instrument design required. Non-magnetic (speed nut is brass; cage is phosphor bronze). Conform to MIL-N-3336. Cage is easily compressed with finger-pressure to allow insertion of legs into clearance holes. When fully inserted and pressure is released, legs spring apart; retain SPEED NUT in screw-receiving position. Turneddown corners hold firm against force of inserting screw and screw-tightening torque. All instrument mounting nuts listed below take a 6-32 machine screw. Tinnerman Part No. A8938-632-493 A8939-632-493 A6939-632-493 A8940-632-493 A8941-632-493 A8942-632-493 A8943-632-493 A8944-632-493 Our Part No. MS33737-9C MS33737-10C MS33737-11C MS33737-12C MS33737-13C MS33737-14C MS33737-15C MS33737-16C NAS Part No. 487-13 487-14 487-15 487-16 487-17 487-18 487-20 487-21 Instrument Thickness .062 .091 .125 .187 .250 .313 .375 over .375 Price Ea. $1.19 $1.29 $1.29 $1.26 $1.24 $1.28 $0.96 $1.53
CM WP ME HA AP LG EP CS IN EL AV TO PS
Riveted or welded in position. Attach access plates, doors or any part that must be fastened securely, yet easily removed with fasteners retained in a blind location. Install with AN426AD-3 rivets. Part No. A6195-6Z-1D A6195-8Z-1D Screw Size #6 #8 Price/Ea. $0.39 $0.37
6-32 .180-.120 .030-.051 04-00151 $1.76 8-32 .310-.500 .020-.090 04-00152 $0.92 10-32 .350-.500 .020-.090 04-00153 $0.79
U TYPE
Push into position with thumb until extrusion on lower leg snaps into screw hole. The fastener floats in screwre ceiv ing position to correct for normal misalignment in panel mounting holes. Place second panel in position & drive screw. Access to opposite side is unnecessary. Flush mounting can be made by embossing either panel.
High strength Forged hex nuts suitable for structural and non-structural applications in metal, plastic and composite materials. Sold each. Specifications: Surplus, Thread: 10-32, Edge Distance: .375, Material Thickness: .020-.090 P/N 04-02052 ................... $0.58
Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. Floats free for easy hole alignment.
Part TypeB Design P-panel A B C-max. ctr. G-panel T-matl. Price Number Scrw Size Variation Thickness Range Length Length hole to edge hole dia. Thkness A1784-6Z-1D #6 E .025-.051 0.61 0.44 0.281 0.250 0.025 $0.33 A1785-6Z-1D #6 E .025-.064 0.84 0.44 0.500 0.281 0.025 $0.36 A1789-8Z-1D #8 E .025-.051 0.61 0.44 0.281 0.250 0.028 $0.27 A1787-8Z-1D #8 E .025-.064 0.84 0.44 0.500 0.281 0.028 $0.28 A1788-8Z-1D #8 AE .025-.064 0.84 0.44 0.500 0.170 0.028 $0.24 A1348-8Z-1D #8 AE .025-.064 0.73 0.50 0.343 0.170 0.028 $0.42 A1786-8Z-1D #8 CEH .040-.051 0.53 0.50 0.218 0.250 0.028 $0.21 A178710Z-1D #10 E .025-.064 0.84 0.44 0.500 0.281 0.031 $0.35 A1758-10Z-1D #10 E .081-.094 0.62 0.44 0.281 0.281 0.031 $0.30
BV
73
MACHINE SCREWS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQ-P-416, Type 2, Class 3. MS27039C screws are stainless steel Manufactured to MIL-S-6050 or MIL-8695. Equivalent to NAS 220.
Part Number Diam.-Thrd. Size Length (In.) MS27039 Price MS27039C Price MS27039-0804 8-32 9/32 $0.11 $0.38 MS27039-0805 8-32 11/32 $0.10 $0.48 MS27039-0806 8-32 13/32 $0.13 ---MS27039-0807 8-32 15/32 $0.13 ---MS27039-0808 8-32 17/32 $0.14 ---MS27039-0809 8-32 19/32 $0.15 ---MS27039-0810 8-32 21/32 $0.13 ---MS27039-0811 8-32 23/32 $0.15 $0.84 MS27039-0812 8-32 25/32 $0.18 ---MS27039-0813 8-32 27/32 $0.10 $0.65 MS27039-0814 8-32 29/32 $0.19 $0.73 MS27039-0815 8-32 31/32 $0.16 $0.59 MS27039-0816 8-32 1-1/32 $0.21 ---MS27039-0817 8-32 1-3/32 $0.19 $0.72 MS27039-0818 8-32 1-5/32 $0.26 ---MS27039-0819 8-32 1-7/32 $0.20 ---MS27039-0820 8-32 1-9/32 $0.26 ---MS27039-0821 8-32 1-11/32 $0.26 ---MS27039-0822 8-32 1-13/32 $0.22 ---MS27039-0823 8-32 1-15/32 $0.23 ---MS27039-0824 8-32 1-17/32 $0.23 ---MS27039-1-04 10-32 9/32 $0.15 $0.84 MS27039-1-05 10-32 11/32 $0.11 $0.34 MS27039-1-06 10-32 13/32 $0.10 $0.59 MS27039-1-07 10-32 15/32 $0.12 ---MS27039-1-08 10-32 17/32 $0.09 ---MS27039-1-09 10-32 19/32 $0.15 $0.57 MS27039-1-10 10-32 21/32 $0.13 $0.90 MS27039-1-11 10-32 23/32 $0.11 $0.79 MS27039-1-12 10-32 25/32 $0.13 ---MS27039-1-13 10-32 27/32 $0.15 $0.81 MS27039-1-14 10-32 29/32 $0.16 ---MS27039-1-15 10-32 31/32 $0.19 $0.98 MS27039-1-16 10-32 1-1/32 $0.17 ---MS27039-1-17 10-32 1-3/32 $0.19 $1.10 MS27039-1-18 10-32 1-5/32 $0.19 $1.31 MS27039-1-19 10-32 1-7/32 $0.21 $1.34 MS27039-1-20 10-32 19/32 $0.18 $1.36 MS27039-1-21 10-32 1-11/32 $0.21 $1.43 MS27039-1-22 10-32 1-13/32 $0.21 $1.50 MS27039-1-23 10-32 1-15/32 $0.39 $2.50 MS27039-1-24 10-32 1-17/32 $0.52 $1.90 MS27039-1-25 10-32 1-19/32 $0.53 ---MS27039-1-26 10-32 1-21/32 $0.42 ---MS27039-1-27 10-32 1-23/32 $0.43 ---MS27039-1-28 10-32 1-25/32 $0.43 ---MS27039-1-29 10-32 1-27/32 $0.78 ---MS27039-1-30 10-32 1-29/32 $0.44 ---MS27039-1-31 10-32 1-31/32 $0.48 ---MS27039-1-32 10-32 2-1/32 $0.53 ---$0.67 MS27039-4-06 1/4-28 13/32 $0.17 MS27039-4-07 1/4-28 15/32 $0.24 $1.20 MS27039-4-08 1/4-28 17/32 $0.21 $0.86 MS27039-4-09 1/4-28 19/32 $0.19 $1.39 MS27039-4-10 1/4-28 21/32 $0.19 $1.40 MS27039-4-11 1/4-28 23/32 $0.21 $0.88 MS27039-4-12 1/4-28 25/32 $0.27 $1.65 MS27039-4-13 1/4-28 27/32 $0.23 $1.10 MS27039-4-14 1/4-28 29/32 $0.26 $2.15 MS27039-4-15 1/4-28 31/32 $0.25 $1.50 MS27039-4-16 1/4-28 1-1/32 $0.27 $1.24 MS27039-4-17 1/4-28 1-3/32 $0.29 ---MS27039-4-18 1/4-28 1-5/32 $2.20 ---MS27039-4-19 1/4-28 1-7/32 $0.34 ---MS27039-4-20 1/4-28 1-9/32 $0.29 ---MS27039-4-21 1/4-28 1-11/32 $0.30 ---MS27039-4-22 1/4-28 1-13/32 $0.36 ---MS27039-4-23 1/4-28 1-15/32 $0.31 ---MS27039-4-24 1/4-28 1-17/32 $0.39 ----
82 flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3. Manufactured from carbon steel to Federal Standard #66.
Diam.-Thrd. Size Length (In.) 4-40 1/4 4-40 5/16 4-40 1/2 4-40 5/8 6-32 1/4 6-32 3/8 6-32 1/2 6-32 5/8 6-32 3/4 8-32 5/16 8-32 1/2 8-32 5/8 Price $0.11 $0.19 $0.09 $0.08 $0.26 $0.07 $0.06 $0.08 $0.07 $0.09 $0.08 $0.09
Part Number MS35190-221 MS35190-222 MS35190-225 MS35190-226 MS35190-234 MS35190-236 MS35190-238 MS35190-239 MS35190-240 MS35190-250 MS35190-253 MS35190-254
Old AN505R -4R4 -4R5 -4R8 -4R10 -6R4 -6R6 -6R8 -6R10 -6R12 -8R5 -8R8 -8R10
74
MACHINE SCREWS
MS24693 & MS24693C MACHINE SCREWS
Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phillips recessed head. Thread Length Phillips Part No. Price Ea. Slotted Part No. Price Ea. 1/2 AN526-440R8 $0.06 ------4-40 1 AN526-440R16 ----------1/4 AN526-632R4 $0.04 ------5/16 AN526-632R5 $0.04 ------3/8 AN526-632R6 $0.04 AN526-632-6 $0.14 7/16 AN526-632R7 $0.06 ------1/2 AN526-632R8 $0.06 AN526-632-8 $0.11 6-32 9/16 AN526-632R9 $0.06 ------5/8 AN526-632R10 $0.06 AN526-632-10 $0.54 3/4 AN526-632R12 $0.05 AN526-632-12 $0.10 7/8 AN526-632R14 $0.05 ------1 AN526-632R16 $0.06 ------1/4 AN526-832R4 $0.07 ------5/16 AN526-832R5 $0.05 ------3/8 AN526-832R6 $0.05 ------7/16 AN526-832R7 $0.06 ------1/2 AN526-832R8 $0.06 AN526-832-8 $0.46 8-32 9/16 AN526-832R9 $0.09 ------5/8 AN526-832R10 $0.06 ----3/4 AN526-832R12 $0.08 AN526-832-12 $0.24 7/8 AN526-832R14 $0.09 ------1 AN526-832R16 $0.09 AN526-832-16 $0.19 1/4 AN526-1032R4 $0.11 ------5/16 AN526-1032R5 $0.07 ------3/8 AN526-1032R6 $0.08 ------7/16 AN526-1032R7 $0.07 ------1/2 AN526-1032R8 $0.09 ------9/16 AN526-1032R9 $0.09 ------5/8 AN526-1032R10 $0.09 AN526-1032-10 $0.16 10/32 3/4 AN526-1032R12 $0.11 AN526-1032-12 $0.13 7/8 AN526-1032R14 $0.12 AN526-1032-14 $0.29 1 AN526-1032R16 $0.13 -------1-1/8 AN526-1032R18 $0.13 ------1-1/4 AN526-1032R20 $0.10 ------1-1/2 AN526-1032R24 $0.19 ------1-3/4 AN526-1032R28 $0.28 ------2 AN526-1032R32 $0.52 -------
CM WP ME HA AP LG EP CS IN EL
(FORMERLY AN 507)
These non-structural screws have a 100 countersunk flat head. Cadmium plated, Type 2, Class 3. Tensile strength 55,000 PSI. For both CAD plated and Stainless MS24693C are stainless steel. Thread Length 3/8 7/16 1/2 5/8 1 5/32 1/4 3/8 7/16 1/2 5/8 3/4 1 1/4 3/8 7/16 1/2 5/8 3/4 1 1-1/4 1/4 3/8 7/16 1/2 5/8 3/4 1 1-1/4 7/16 1/2 5/8 1 MS24693 Cad Plated P/N MS24693S4 MS24693S5 MS24693S6 MS24693S7 MS24693S10 MS24693-S17 MS24693S24 MS24693S26 MS24693S27 MS24693S28 MS24693S29 MS24693S30 MS24693S32 MS24693S46 MS24693S48 MS24693S49 MS24693S50 MS24693S51 MS24693S52 MS24693S54 MS24693S56 MS24693S268 MS24693S270 MS24693S271 MS24693S272 MS24693S273 MS24693S274 MS24693S276 MS24693S278 ----MS24693S294 MS24693S295 ----Price Each $0.04 $0.04 $0.05 --$0.07 $0.56 $0.04 $0.05 --$0.04 $0.05 $0.06 $0.06 $0.04 $0.05 --$0.05 $0.06 $0.05 $0.09 --$0.08 $0.05 --$0.05 $0.09 $0.11 $0.14 ----------MS24693C Stainless P/N MS24693C4 --MS24693C6 MS24693C7 MS24693C10 --MS24693C24 MS24693C26 MS24693C27 MS24693C28 MS24693C29 MS24693C30 MS24693C32 MS24693C46 MS24693C48 MS24693C49 MS24693C50 MS24693C51 MS24693C52 MS24693C54 MS24693C56 MS24693C268 MS24693C270 MS24693C271 MS24693C272 MS24693C273 MS24693C274 MS24693C276 MS24693C278 MS24693C293 MS24693C294 MS24693C295 MS24693C298 Price Each $0.04 --$0.04 $0.06 $0.05 --$0.04 $0.04 $0.05 $0.06 --$0.08 $0.06 $0.09 $0.09 $0.09 $0.09 $0.09 $0.10 $0.13 $0.17 $0.15 $0.09 $0.10 $0.12 $0.15 $0.14 $0.18 $0.15 $0.26 $0.27 $0.24 $0.39
4-40 2-56
6-32
8-32
10-32
1/4-28
Stainless steel Phillips and slotted, Use slotted screws for antiques.
High-strength machine screws fabricated from alloy steel per specification AMS6300. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416, Type II, Class 3. Cross-recessed head. Thread Size Price Each $0.10 $0.12 $0.13 $0.16 8-32 $0.13 $0.20 $0.14 $0.24 $0.12 $0.12 $0.12 $0.15 $0.16 $0.15 10-32 $0.23 $0.19 $0.34 $0.23 $0.29 $0.76 $0.63 1/4-28 $1.52 ----
Dash No. -832R6 -832R7 -832R8 -832R10 -832R12 -832R14 -832R16 -832R20 -10R6 -10R7 -10R8 -10R9 -10R10 -10R12 -10R14 -10R16 -10R18 -10R20 -10R24 -416R14 -416R16 -416R18 -416R20
Length In. 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/4 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 7/8 1 1-1/8 1-1/4
Grip In. 1/32 1/16 1/8 7/32 11/32 15/32 19/32 27/32 1/32 1/16 1/8 5/32 7/32 11/32 15/32 19/32 23/32 27/32 1-3/32 15/32 19/32 23/32 27/32
Thread Length Phillips Part No. Price Ea. Slotted Part No.Price Ea. 4-40 1/2 AN526C-440R8 $0.08 ------1/4 AN526C-632R4 $0.07 AN526C-632-4 $0.26 3/8 AN526C-632R6 $0.05 ------1/2 AN526C-632R8 $0.06 AN526C-632-8 $0.20 6-32 5/8 AN526C-632R10 $0.08 AN526C-632-10 $0.21 3/4 AN526C-632R12 $0.07 1 AN526C-632R16 $0.08 AN526C-632-16 $0.29 1/4 AN526C-832R4 $0.14 ------3/8 AN526C-832R6 $0.08 ------1/2 AN526C-832R8 $0.08 AN526C-832-8 $0.16 8-32 5/8 AN526C-832R10 $0.09 AN526C-832-10 $0.30 3/4 AN526C-832R12 $0.10 AN526C-832-12 $0.34 1 AN526C-832R16 $0.14 AN526C-832-16 $0.20 1/4 AN526C-1032R4 $0.38 ------3/8 AN526C-1032R6 $0.11 AN526C-1032-6 $0.21 1/2 AN526C-1032R8 $0.13 AN526C-1032-8 $0.24 5/8 AN526C-1032R10 $0.15 AN526C-1032-10 $0.20 10-32 3/4 AN526C-1032R12 $0.16 AN526C-1032-12 --1 AN526C-1032R16 $0.11 ------1-1/4 AN526C-1032R20 ----------1-1/2 AN526C-1032R24 $0.22 ------1/4-20 1/2 AN526C-420R8 $1.19 ------1/2 AN526C-428R8 $0.28 ------1/4-28 3/4 AN526C-428R12 $0.37 ------1-1/8 ------AN526C-428-18 $0.69 Note: Some sizes of AN526C screws are furnished as commercial equipment as AN screws are no longer available.
AV TO PS BV
75
These structural screws have a 100 countersunk head. Cadmium plated per QQ-P-416, Type II, Class 3. Minimum tensile strength for steel is 125,000 PSI.
Grip In. 3/32 7/32 9/32 11/32 13/32 15/32 17/32 19/32 21/32 23/32 25/32 27/32 29/32 31/32 1-1/32 1-3/32 1-17/32 1-19/32 1-23/32 Thread Size 8-32 8-32 8-32 8-32 8-32 8-32 8-23 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 Price Each $0.09 $0.13 $0.12 $0.12 $0.11 $0.09 --$0.14 --$0.14 --$0.18 --$0.21 --$0.21 $0.16 $0.16 --$0.20 $1.95 $0.82 $1.36 ----$0.10 $0.12 $0.12 $0.13 $0.12 $0.16 $0.15 $0.13 $0.16 --$0.15 $0.17 $0.18 --$0.21 --$0.21 MS24694 Dash No. -S65 -S66 -S67 -S68 -S69 -S70 -S71 -S72 -S74 -S75 -S76 -S77 -S79 -S82 -S84 -S88 -S90 -S93 -S94 -S95 -S96 -S97 -S98 -S99 -S100 -S101 -S102 -S103 -S104 -S105 -S106 -S107 -S108 -S109 -S110 -S111 -S113 -S115 -S119 -S121 -S123 -S148 AN509 Dash No. -10R23 -10R24 -10R25 -10R26 -10R27 -10R28 -10R29 -10R30 -10R32 -10R33 -10R34 -10R35 -10R37 -10R40 -10R42 -10R46 -10R48 -416R6 -416R7 -416R8 -416R9 -416R10 -416R11 -416R12 -416R13 -416R14 -416R15 -416R16 -416R17 -416R18 -416R19 -416R20 -416R21 -416R22 -416R23 -416R24 -416R26 -416R28 -416R32 -416R34 -416R36 -516R16 Length In. 1-15/32 1-17/32 1-19/32 1-21/32 1-23/32 1-25/32 1-27/32 1-29/32 2-1/32 2-3/32 2-5/32 2-7/32 2-11/32 2-17/32 2-21/32 2-29/32 3-1/32 13/32 15/32 17/32 19/32 21/32 23/32 25/32 27/32 29/32 31/32 1-1/32 1-3/32 1-5/32 1-7/32 1-9/32 1-11/32 1-13/32 1-15/32 1-17/32 1-21/32 1-25/32 2-1/32 2-5/32 2-9/32 1-1/32 Grip In. 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 2-1/16 2-3/16 2-7/16 2-9/16 9/64 3-16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/8 1-1/4 1-1/2 1-5/8 1-3/4 15/32 Thread Size 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 5/16-24 Price Each $0.10 $0.23 ------$0.26 --$0.44 $0.34 $1.12 $0.74 $0.94 $0.72 $0.63 $0.30 $2.55 $0.54 --------$0.19 --$0.22 $0.22 $0.29 $0.28 $0.25 $0.25 $0.27 $0.26 ----$0.34 $0.32 $0.29 $0.46 $0.56 $0.72 $1.19 $1.83 ---
7/64
3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16
Same style screws as MS24694, except stainless steel. Phillips head. (Formerly AN509C) Minimum tensile strength for stainless steel is 85,000 PSI.
Length Inches 9/32 11/32 13/32 15/32 17/32 19/32 21/32 23/32 25/32 27/32 29/32 1-1/32 1-3/32 1-5/32 9/32 11/32 13/32 Price ea. $0.11 $0.12 $0.17 $0.14 $0.11 $0.12 $0.17 $0.19 $0.17 $0.19 $0.29 $0.32 $0.59 $1.70 $0.17 $0.14 $0.17 MS Part No. MS24694C49 MS24694C50 MS24694C51 MS24694C52 MS24694C53 MS24694C54 MS24694C55 MS24694C56 MS24694C57 MS24694C58 MS24694C59 MS24694C60 MS24694C61 MS24694C62 MS24694C92 AN509C No. -10R7 -10R8 -10R9 -10R10 -10R11 -10R12 -10R13 -10R14 -10R15 -10R16 -10R17 -10R18 -10R19 -10R20 Thread Size 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 1/4-28 Length Inches 15/32 17/32 19/32 21/32 23/32 25/32 27/32 29/32 31/32 1-1/32 1-3/32 1-5/32 1-7/32 1-9/32 3/8 Price ea. $0.16 $0.18 $0.17 $0.18 $0.22 $0.23 $0.23 $0.22 $0.41 $0.28 $0.36 $0.39 $0.39 $0.34 $0.43
Type: NAS387. Material: Carbon Steel Type 1016 - 1024. Finish: Nickel Plate Thread 6-32 Length 3/8 7/16 1/2 5/8 3/4 1/2 5/8 3/4 7/8 Part No. NAS387-632-6P NAS387-632-7P NAS387-632-8P NAS387-632-10P NAS387-632-12P NAS387-832-8P NAS387-832-10P NAS387-832-12P NAS387-832-14P Price $0.16 $0.10 $0.10 $0.16 $0.16 $0.20 $0.20 $0.24 $0.30 Thread
10-32
8-32
76
CM WP ME HA AP LG EP CS IN EL AV TO PS
AN502 (fine thread) and AN503 (coarse thread) drilled head, slotted fillister head screws are fabricated from steel meeting specification MILS-6050. Tensile strength 125,000 PSI. Cadmium plated, Type I, Class 3.
BV
77
Phillips 100 Flat Head Fully Threaded Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Type II Tensile -125,000 145,000 PSI
Thrd.
4-40
6-32
2-56
8-32
AP LG EP CS IN EL AV TO PS BV
6-32
10-32
Fingertip Assembly
Ideal for abrasion and cutting protection of wiring, antenna leads, tubing, cables, etc. that are routed through bulkheads, ribs and other internal aircraft structures. Made of hard black nylon. Drill a hole about 1/8 larger than bushing I.D. and insert bushing. Spring-like fingers snap out to hold it in place. Special sizes on request with 100 piece minimum. *For .062 max. bulkhead thickness. All others for .125 max. bulkhead thickness.
SNAP BUSHINGS
Length .250 .312 .375 .438 .500 .625 .750 .188 .250 .312 .375 .438 .500 .625 .750 .875 1.00 .250 .312 .375 .438 .500 .625 .750 .875 1.00 1.25 .250 .312 .375 .438 .500 .625 .750 .875 1.00 1.25
Phillips Part No. NAS514P440-4P NAS514P440-5P NAS514P440-6P NAS514P440-7P NAS514P440-8P NAS514P440-10P NAS514P440-12P NAS514P632-3P NAS514P632-4P NAS514P632-5P NAS514P632-6P NAS514P632-7P NAS514P632-8P NAS514P632-10P NAS514P632-12P NAS514P632-14P NAS514P632-16P NAS514P832-4P NAS514P832-5P NAS514P832-6P NAS514P832-7P NAS514P832-8P NAS514P832-10P NAS514P832-12P NAS514P832-14P NAS514P832-16P NAS514P832-20P NAS514P1032-4P NAS514P1032-5P NAS514P1032-6P NAS514P1032-7P NAS514P1032-8P NAS514P1032-10P NAS514P1032-12P NAS514P1032-14P NAS514P1032-16P NAS514P1032-20P Phillips Part No. NAS517-2-1 NAS517-2-2 NAS517-2-3 NAS517-2-4 NAS517-2-5 NAS517-2-6 NAS517-2-7 NAS517-2-8 NAS517-2-9 NAS517-2-10 NAS517-2-11 NAS517-2-12 NAS517-3-0 NAS517-3-1 NAS517-3-2 NAS517-3-3 NAS517-3-4 NAS517-3-5 NAS517-3-6 NAS517-3-7 NAS517-3-8 NAS517-3-9 NAS517-3-10 NAS517-3-11 NAS517-3-12 NAS517-3-13 NAS517-3-14 NAS517-3-16
Price Ea. $0.07 $0.08 $0.08 $0.08 $0.08 $0.08 $0.08 $0.13 $0.08 $0.08 $0.08 $0.08 $0.10 $0.09 $0.09 $0.09 $0.09 $0.08 $0.07 $0.13 $0.14 $0.14 $0.16 $0.12 $0.14 $0.18 $0.15 $0.07 $0.11 $0.13 $0.16 $0.13 $0.16 $0.14 $0.15 $0.16 $0.19 Price Ea. $0.08 $0.09 $0.15 $0.14 $0.09 $0.21 $0.17 $0.18 $0.12 $0.19 $0.12 $0.13 $0.15 $0.09 $0.11 $0.13 $0.14 $0.12 $0.16 $0.14 $0.19 $0.13 $0.15 $0.18 $0.17 $0.13 $0.19 $0.19
Mounting Hole Bushing Price Mounting Hole Bushing Price Part No. Dia. I.D. Ea. Part No. Dia. I.D. Ea. 04-05700* .250 1/8 $0.07 04-05753 .500 3/8 $0.12 04-05710* .312 3/16 $0.12 04-05775 .625 1/4 $0.22 04-05730 .375 1/4 $0.08 04-05773 .625 1/2 $0.13 04-05738 .437 1/4 $0.16 04-05790 .750 3/8 $0.18 04-05758 .500 1/4 $0.16 04-05793 .750 9/16 $0.16 *For .062 max. bulkhead thickness. All others for .125 max. bulkhead thickness. Less 15% Discount on 100 pieces per size.
Converts raw-edged holes to smooth, neat, insulated holes. Locking fingers snap into holes with fingertip pressure. Locking finger steps are designed at fractional increments to accommodate a range of panel thicknesses up to .250 (6,4 mm). Withstands a push back force of 35 pounds.
Part Dimensions Panel Dimensions P/N UL/CSA A Inside B Head C Overall Maximum Mounting Hole Color DesigDiameter Diameter Height Thkness Dia. nation in. mm. in. mm. Black in. mm. in. mm. in. mm.
SNAP BUSHINGS
Thrd Grip .125 .188 .250 .312 8-32 .375 Phillips 100 Deg. Flat .438 Head .500 Alloy Steel Per .562 Mil-S-6049 .625 .688 Finish - Cad Plate per .750 QQ-P-416 Type II .125 .188 .250 .312 .375 10-32 .438 .500 .562 .625 .688 .750 .812 .875 1.00
Lgth .469 .531 .594 .656 .719 .781 .844 .906 .969 1.031 1.093 1.156 .406 .469 .531 .594 .656 .719 .781 .844 .906 .969 1.031 1.093 1.156 1.219 1.281 1.406
Set screws are used to provide immediate, binding location of various parts on shafts. Maximum holding pressure is made by the cup point edge gripping the contact suface. Allen head wrenches are used to operate set screws.
Part No. 04-00182 04-00183 Thread Length 8-32 3/16 8-32 1/4 Price $0.09 $0.09 Part No. 04-00184 04-00189 04-00191 Thread Length 10-32 1/4 10-32 1/2 1/4-28 5/16 Price $0.10 $0.09 $0.12
SET SCREWS
.125 3,2
1.093 - 27, SB1093 2163 .875 22,2 1.218 30,9 .453 11,5 1.125 8-28 ,6 - 14 1.093 - 27, SB1093 .125 3,2 2166 .937 23,8 1.218 30,9 .453 11,5 1.125 8-28, 6 -15 Model 2163 ...... P/N 04-01985 .............. $0.30 Model 2166 ...... P/N 04-01986 .............. $0.26
Dia. Length Sugg. In. In. Drill Size .060 1/4 #55 (.052) .075 1/4 #51 (.067) .100 3/16 #44 (.086) .100 1/4 #44 (.086) .116 1/4 #37 (.104) .060 1/8 #55 (.052) .060 3/16 #55 (.052) .075 1/8 #51 (.067) .075 3/16 #51 (.067) .100 1/8 #44 (.086) .116 3/16 #37 (.104) .116 5/16 #37 (.104) Price Each $0.23 $0.06 $0.06 $0.06 $0.05 $0.05 $0.06 $0.06 $0.06 $0.06 $0.07 $0.07
Set Screw - Socket Products Type: Socket Set Screws Point Type: Cup Thread Size: 10-32 Overall Length: 1/4 Material: Alloy Steel - Grade 8 Finish/Coating: Black Oxide. Key Size (Inch): 3/32. Metalworking Book: 2085. Big Book: 1830 P/N 04-01032............................$0.37 Material: 6/6 Nylon Certifications: File E15331 File LR8919 Flammability Rating: 94V-2 Material Temperature Index: 125C (257F)Max. temperature on part not to exceed 105C (221F) Insulating feed-thru bushings for limited internal clearance applications. P/ N 04-02026 ......................$0.19
Spec. MS21318
78
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
4-40
6-32
8-32
Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile 125,000-145,000 PSI
10-32 Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile -160,000 180,000 PSI
Phillips 100 Flat Head Tensile 160,000 180,000 PSI Alloy Steel Per MIL-S-6049 Finish - Cadmium per QQ-P-416, Type II Grip .125 .188 8-32 .250 .312 .375 .125 .188 .250 10-32 .312 .375 .438 .500 Thrd. Lgth. .401 .464 .526 .588 .651 .401 .464 .526 .588 .651 .714 .776 Part No. Price Ea. NAS1202-2 $0.12 NAS1202-3 $0.16 NAS1202-4 $0.10 NAS1202-5 $0.10 NAS1202-6 $0.10 NAS1203-2 $0.09 NAS1203-3 $0.14 NAS1203-4 $0.15 NAS1203-5 $0.17 NAS1203-6 $0.18 NAS1203-7 $0.15 NAS1203-8 $0.18
Phillips Hex Head Alloy Steel Per MIL-S-6049 Finish - Cad Plate per QQ-P-416, Type II Tensile 160,000-185,000 PSI
Phillips Pan Head Alloy Steel per MIL-S-6049 Finish: Cadmium per QQ-P-416, Type II Tensile: 160,000-180,000 PSI
Phillips 82 Flat Head Stainless Steel Thrd. Lgth. .188 .250 2-56 .312 .375 .250 .312 .375 4-40 .438 .500 Part No. MS51959-2 MS51959-3 MS51959-4 MS51959-5 MS51959-13 MS51959-14 MS51959-15 MS51959-16 MS51959-17 Each $0.04 $0.04 $0.04 $0.04 $0.04 $0.05 $0.05 $0.05 $0.06 Thrd. Lgth. .312 .375 6-32 .438 .500 .625 .375 .438 .500 8-32 .625 .750
Thrd. Lgth. .338 .401 .464 .526 .588 .651 8-32 .714 .776 .838 .901 .964 1.026 .401 10-32 .464 .526
Part No. NAS623-2-1 NAS623-2-2 NAS623-2-3 NAS623-2-4 NAS623-2-5 NAS623-2-6 NAS623-2-7 NAS623-2-8 NAS623-2-9 NAS623-2-10 NAS623-2-11 NAS623-2-12 NAS623-3-2 NAS623-3-3 NAS623-3-4
Part No. Each Each Thrd. Lgth. .588 NAS623-3-5 $0.17 $0.14 .651 NAS623-3-6 $0.18 $0.15 .714 NAS623-3-7 $0.16 $0.16 .776 NAS623-3-8 $0.17 $0.13 .838 NAS623-3-9 $0.16 $0.19 .901 NAS623-3-10 $0.17 $0.21 .964 NAS623-3-11 $0.19 $0.19 1.026 NAS623-3-12 $0.17 $0.21 10-32 1.088 NAS623-3-13 $0.18 $0.20 1.151 NAS623-3-14 $0.21 $0.17 1.214 NAS623-3-15 $0.16 $0.10 1.276 NAS623-3-16 $0.21 $0.13 1.338 NAS623-3-17 $0.24 $0.11 1.401 NAS623-3-18 $0.17 $0.18 $0.15
79
A
Size 4 4 4 4 4 4 6 6 6 6 8 8 8 8 8 10 10 10 10
ME
8
HA
10
Slotted Part No. Price Type A Each THA4-4 --THA4-6 $0.15 THA4-8 $0.06 THA4-10 $0.06 THA4-12 $0.20 -------THA6-6 $0.15 THA6-8 $0.05 THA6-10 $0.21 THA6-12 $0.02 THA8-6 $0.03 THA8-8 $0.04 THA8-10 --THA8-12 --THA8-16 $0.07 THA10-8 $0.10 THA10-10 --THA10-12 $0.04 THA10-16 $0.11
AP
Size
B
Price Each ----------$0.07 --$0.36 ----------$0.06 $0.05 $0.11 $0.04
LG EP CS IN
Size Length 4 4 4 4 4 6 6 6 6 8 8 8 8 8 10 10 10 1/4 3/8 1/2 5/8 3/4 3/8 1/2 5/8 3/4 3/8 1/2 5/8 3/4 1 1/2 5/8 3/4
5/16
10
7/16
EL AV TO PS BV
MS numbers without the C at the end - Material: Carbon Steel Type 1016 - 1024 Finish: CAD TYPE II MS numbers with the C at the end - Material: Stainless Steel Type 410 Finish: Passivate
Size #4 #6 Length 1/4 3/8 1/2 1/4 3/8 1/2 5/8 3/4 1 3/8 1/2 5/8 3/4 1 1/2 5/8 3/4 1 Part No. MS51861-12 MS51861-14 MS51861-15 MS51861-22 MS51861-24 MS51861-25 MS51861-26 MS51861-27 MS51861-29 MS51861-34 MS51861-35 MS51861-36 MS51861-37 MS51861-39 MS51861-45 MS51861-46 MS51861-47 MS51861-49 Price each $0.10 $0.11 $0.12 $0.12 $0.13 $0.13 $0.14 $0.15 $0.16 $0.12 $0.14 $0.16 $0.17 $0.18 $0.17 $0.18 $0.19 $0.20 Part No. MS51861-12C MS51861-14C MS51861-15C MS51861-22C MS51861-24C MS51861-25C MS51861-26C MS51861-27C MS51861-29C MS51861-34C MS51861-35C MS51861-36C MS51861-37C MS51861-39C MS51861-45C MS51861-46C MS51861-47C MS51861-49C Price each $0.20 $0.21 $0.22 $0.22 $0.23 $0.24 $0.25 $0.26 --$0.24 $0.15 $0.28 $0.30 --$0.30 $0.32 -----
10
Size Length Part No. Price Ea. 100FLAT HEAD 6 1/2 C6X8 $0.07 TYPE A, PHILLIPS, 8 1/2 C8X8 $0.08 STAINLESS 10 1/2 C10X8 $0.12 AN530 Size SLOTTED PHILLIPS Price P/N AN530 Dash# Price P/N AN530 Dash# ROUND 4X1/4 -----$0.07 4R4 HEAD 4X3/8 $0.24 -4-6 --N/A Use slot- 4X1/2 ted type for 6X3/8 antiques. 6X1/2
---------------------6-6 -6-8 ---6-12 ----10-8 --$0.36 $0.08 $0.09 $0.48 --$0.06 $0.12 $0.11 $0.10 4R8 6R6 6R8 6R10 6R12 8R6 8R8 10R8 10R16
#8
#10
80
MACHINE SCREWS
Use brass screws for all panel installations to eliminate magnetic interference. All brass screws are coated inblack oxide.
These kits do not include any structural screws. Aircraft Type BEECHCRAFT Baron Bonanza Musketeer/Sport Sundowner BELLANCA Citabria Viking CESSNA 120/140 150/152 170 170-B 172/172 Skyhawk 172RG 172 XP 175 177/177RG Cardinal 180/185 Skywagon 182RG Skylane 188 Agwagon 190/195 205 206-208 Stationair 210 Centurion 310 310/320 335/340 336/337 337 Super Skymaster 401/402 411/414 421 Commander - Lark/Darter Ercoupe - 415C/Forney GRUMMAN AA1A/AA1B Ag Cat Cheetah/Tiger Lake - Amphibian PIPER Aerostar Apache Arrow Arrow III Aztec Cherokee 140/150/160/180/235 Cherokee Six Comanche (Single) Comanche (Twin) J-3 Cub Navajo Pawnee PA28 Arrow (Fat Wing) PA28 Challenger/Archer PA28R Arrow (Tap. Wing) PA32R Lance Seneca I & II Super Cub Tomahawk Tripacer/Colt Warrior/Archer Pitts - S2A Rockwell - 12/114 MOONEY 68, 77, 78 201/231 M20C M20-C 69, 76 M20E/G (up to 1976) M20E/G (1977 & up) M20F # of Pieces 1310 675 615 615 248 310 355 310 310 410 330 520 450 600 530 580 775 370 510 555 630 1110 1110 1492 1347 1468 1342 1580 525 490 515 975 265 615 590 1050 570 455 485 800 2065 1965 615 670 590 685 1415 440 360 480 640 570 1240 970 1022 -
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This 2400 piece assortment is ideal for aircraft homebuilders, owners, mechanics and FBOs. It is packaged in a handy divided storage kit and contains 2100 stainless steel screws and washers and 300 stop nuts. Kit contains 100 each of the following:
WASHERS
Tinnerman Countersunk A3135- SS- 017 (#8) A3235- SS- 020 (#10) Flat: AN960C6 AN960C8 or AN960C10
NOTE: 10% DISCOUNT OFFERED IF CUSTOMER CAN PROVIDE US WITH TYPES AND SIZES FOR AIRCRAFT NOT LISTED.
81
COARSE THREADED
MS NO. THREAD 4-40 4-40 6-32 6-32 8-32 8-32 8-32 LENGTH 1/4 3/8 3/8 1/2 3/8 1/2 5/8 PRICE $1.13 $1.39 $1.22 $1.22 $1.51 $1.39 $1.58 PART NO. NAS1352-04H4P NAS1352-04H6P NAS1352-06H6P NAS1352-06H8P NAS1352-06H10P NAS1352-08H6P NAS1352-08H8P NAS1352-08H10P NAS1352-08H12P PART NO. NAS1351-3H6P NAS1351-3H8P NAS1351-3H10P NAS1351-3H12P NAS1351-4H10P NAS1351-4H12P NAS1351-4H14P NAS1351-4H16P
COARSE THREADED
MS NO. THREAD MS24677-1 4-40 MS24677-2 4-40 MS24677-7 6-32 MS24677-8 6-32 MS24677-9 6-32 MS24677-14 8-32 MS24677-15 8-32 MS24677-16 8-32 MS24677-17 8-32 LENGTH 1/4 3/8 3/8 1/2 5/8 3/8 1/2 5/8 3/4 LENGTH 3/8 1/2 5/8 3/4 5/8 3/4 4/8 1 PRICE $1.10 $0.85 $1.04 $0.99 $1.04 $0.99 $1.02 $1.09 $1.14 PRICE $1.09 $0.94 $0.96 $1.12 $1.42 $1.24 $1.46 $1.38
FINE THREADED
PART NO. NAS1351C3H6 NAS1351C3H8 NAS1351C3H10 NAS1351C4H10 NAS1351C4H12 NAS1351C4H14 NAS1351C4H16 MS NO. THREAD MS24673-1 10-32 MS24673-2 10-32 MS24673-3 10-32 MS24673-10 1/4-28 MS24673-11 1/4-28 MS24673-12 1/4-28 MS24673-13 1/4-28 LENGTH 3/8 1/2 5/8 5/8 3/4 7/8 1 PRICE $1.67 $1.40 $1.72 $1.72 $1.60 $5.25 $2.60
FINE THREADED
MS NO. THREAD MS24678-9 10-32 MS24678-10 10-32 MS24678-11 10-32 MS24678-12 10-32 MS24678-21 1/4-28 MS24678-22 1/4-28 MS24678-23 1/4-28 MS24678-24 1/4-28
AV TO PS BV
PART NO. NAS1352C04-4 NAS1352C04-8 NAS1352C06-4 NAS1352C06-6 NAS1352C06-8 NAS1352C06-10 NAS1352C08-6 NAS1352C08-8 NAS1352C08-10 NAS1352C08-12
MS NO. THREAD MS16995-9 4-40 MS16995-11 4-40 MS16995-16 6-32 MS16995-17 6-32 MS16995-18 6-32 MS16995-19 6-32 MS16995-25 8-32 MS16995-26 8-32 MS16995-27 8-32 MS16995-28 8-32
FINE THREADED
PART NO. NAS1351C3-6 NAS1351C3-8 NAS1351C3-10 NAS1351C3-12 NAS1351C4-10 NAS1351C4-12 NAS1351C4-16 MS NO. THREAD MS16996-9 10-32 MS16996-10 10-32 MS16996-11 10-32 MS16996-12 10-32 MS16996-22 1/4-28 MS16996-23 1/4-28 MS16996-24 1/4-28 LENGTH 3/8 1/2 5/8 3/4 5/8 3/4 1 PRICE $0.33 $0.31 $0.38 $0.46 $0.62 $0.65 $0.82
FINE THREADED
PART NO. NAS1351-3-6P NAS1351-3-8P NAS1351-3-10P NAS1351-3-12P NAS1351-4-10P NAS1351-4-12P NAS1351-4-14P NAS1351-4-16P MS NO. THREAD MS16998-26 10-32 MS16998-27 10-32 MS16998-28 10-32 MS16998-29 10-32 MS16998-42 1/4-28 MS16998-43 1/4-28 MS16998-44 1/4-28 MS16998-45 1/4-28 LENGTH 3/8 1/2 5/8 3/4 5/8 3/4 7/8 1 PRICE $0.51 $0.42 $0.48 $0.59 $0.95 $0.84 $0.97 $0.83
82
WASHERS
MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace AN935 medium-weight washers. Formerly AN935.
Size 6 8 10 1/4 5/16 3/8 7/16 1/2 Cad. Plated Part No. MS35338-41 MS35338-42 MS35338-43 MS35338-44 MS35338-45 MS35338-46 MS35338-47 MS35338-48 Price $0.02 $0.02 $0.02 $0.02 $0.03 $0.07 $0.09 $0.09 Stainless Part No. MS35338-136 MS35338-137 MS35338-138 MS35338-139 MS35338-140 MS35338-141 MS35338-142 MS35338-143 Price $0.03 $0.03 $0.05 $0.12 $0.19 $0.43 $0.49 $0.64
Taper pin washers are used with AN386 threaded taper pins. Manufactured of steel, cadmium plated per QQ-P-416, Type II, Class 2.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Provide efficient locking action by spring tension and biting action of tapered twisted teeth. Made of 1050 spring steel and cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with internal teeth (Type A) or external teeth (Type B).
Stainless Part No. MS35333-71 MS35333-72 MS35333-73 MS35333-74 MS35333-75 MS35333-76 MS35333-77 MS35333-78 Price Each $0.05 $0.06 $0.06 $0.06 $0.21 $0.26 $0.16 $0.26 Cad. Plated Part No. MS35335-30 MS35335-31 MS35335-32 MS35335-33 MS35335-34 MS35335-35 --------Price Each $0.02 $0.03 $0.03 $0.03 $0.05 $0.08 -----
Cad. Plated Part No. MS35333-37 MS35333-38 MS35333-39 MS35333-40 MS35333-41 MS35333-42 MS35333-43 MS35333-44
Price Each $0.02 $0.02 $0.02 $0.02 $0.04 $0.04 $0.04 $0.11
AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. Available in cadmium plated steel or anodized aluminum, and in regular and light thickness. Add the letter L to dash number to indicate light series. For anodized aluminum washers, add the letters PD after AN number. Examples: AN960-416L is a light series cadmium plated steel washer for 1/4 dia. bolt. AN960PD-10 is an anodized alumsinum washer for a 3/16 dia. bolt. AN960PD-10L is a light series anodized aluminum washer for a 3/16 dia. bolt. NSWC FLAT WASHER KIT - Contains: Flat AN960-916 (12 qty) Flat AN960-616L (4 qty) Flat AN960-416 (40 qty) Flat AN960-716L (8 qty) Flat AN960-616 (40 qty) Flat AN960-816 (32 qty) Flat AN960-816L (32 qty) ................................................... P/N 04-01728 ................ $6.95 Bolt or Dash O.D. Screw # (In.) Size -4 No. 4 .312 -6 No. 6 .375 -8 No. 8 .375 -10 No. 10 .438 -416 1/4 .500 -516 5/16 .562 -616 3/8 .625 -716 7/16 .750 -816 1/2 .875 -916 9/16 1.062 -1016 5/8 1.118 -1216 3/4 1.312 I.D. (In.) .125 .149 .174 .203 .265 .328 .390 .453 .515 .578 .640 .765 Thickness steel Light Regular .016 .032 .016 .032 .016 .032 .032 .063 .032 .063 .032 .063 .032 .063 .032 .063 .032 .063 .032 .063 .032 .063 .032 .090 Thickness Aluminum Light Regular .016 .032 .016 .032 .016 .032 .032 .063 .016 .063 .016 .063 .016 .063 .016 .063 .016 .063 .016 .063 ------------Price Steel Alum. each each $0.02 $0.03 $0.02 $0.03 $0.02 $0.03 $0.02 $0.05 $0.03 $0.06 $0.04 $0.08 $0.04 $0.09 $0.05 $0.12 $0.06 $0.15 $0.09 $0.21 $0.12 ---$0.23 ----
MIL-SPEC designations for tooth lockwashers include, but are not limited to MS35335. These are covered by military procurement specification FF-W-100
NomiInside Outside Material nal Diameter Diameter Thickness Screw Size Min Max Min Max Min Max 9/16 0.576 0.596 0.960 0.985 0.037 0.045 3/4 0.768 0.795 1.220 1.260 0.047 0.055 7/8 0.897 0.927 1.380 1.410 0.052 0.060 MS 35335 Steel Plated -38 -40 -41 P/N 04-00099 04-00101 04-00103 Price $0.28 $0.76 $0.56
TOOTH LOCKWASHER
NAS549-10 Phenolic insulating washers for #10 screws. Size: 13/64 I.D. x 7/16 O.D. x 1/16 thick. ...................................................$0.15 Ea.
A No. 8 Tinnerman style washer with the same O.D. as a No. 10 (0.75). Great for those oversize holes in fairings. Unlike the No. 10 washer with a No. 8 screw, these washers will tighten down on the fairing (not bottom out on the cone) thus providing the proper clamp up between the fastener and the fairing. The G-8 washers are Made in the USA from 304 (1/2 hard) Stainless Steel and are machine tumbled for a shiny finish. P/N 04-01989 .......................... $0.29
NYLON WASHERS
Part No. 04-00219 04-00216 Thread Size #4 #6 Price Ea. $0.02 $0.02 Part No. 04-00217 04-00218 Thread Size #8 #10 Price Ea. $0.02 $0.03
Finishing washers are used in non-structural interior and upholstery applications. The parts covered by NAS390 & NAS391 are getting harder to procure and do not necessarily conform exactly to all of the dimensions stated on the specs. Commercial equivalents can be supplied and are suggested. These are non-critical washers that are readily available and cost effective. Price Flush Price Screw or Countersink Washer Bolt Size Washer Part No. Each 100 Each 100 Part No. #4 NAS391B4P $0.06 $4.80 NAS390B4P --#6 NAS391B6P $0.05 $4.00 NAS390B6P $0.04 $3.20 #8 NAS391B8P $0.07 $5.60 NAS390B8P $0.06 $4.80 #10 NAS391B10P $0.07 $5.60 NAS390B10P $0.08 $6.40
FINISHING WASHERS
83
CLEVIS PlNS
MS24665-5 -1-2 1/32 X 1/2 MS24665-7 -1-3 1/32 X 3/4 MS24665-9 -1-4 1/32 X 1 MS24665-132 -2-2 1/16 X 1/2 MS24665-134 -2-3 1/16 X 3/4 MS24665-136 -2-4 1/16 X 1 MS24665-138 -2-5 1/16 X 1-1/4 MS24665-140 -2-6 1/16 X 1-1/2 MS24665-142 -2-7 1/16 X 1-3/4 MS24665-143 -2-8 1/16 X 2 MS24665-208 5/64 X 1/2 MS24665-281 -3-2 3/32 X 1/2 MS24665-283 -3-3 3/32 X 3/4 MS24665-285 -3-4 3/32 X 1 MS24665-287 -3-5 3/32 X 1-1/4 MS24665-289 -3-6 3/32 X 1-1/2 MS24665-292 -3-8 3/32 X 2 MS24665-349 -4-2 1/8 X 1/2 MS24665-351 -4-3 1/8 X 3/4 MS24665-353 -4-4 1/8 X 1 MS24665-355 -4-5 1/8 X 1-1/4 MS24665-357 -4-6 1/8 X 1-1/2 MS24665-359 -4-7 1/8 X 1 3/4 MS24665-360 -4-8 1/8 X 2 MS24665-362 -4-10 1/8 X 2-1/2 MS24665-426 -5-9 5/32 X 2 MS24665-498 -6-8 3/16 X 2 MS24665-500 -6-10 3/16 X 2 1/2
Discount: 25% for quantities of 100 or more of the same Part No.
Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416, Type lI, Class 3. Provided with drilled hole for cotter pin. Used with clevis forks and in secondary controls which are not subjected to continuous operation. Order by AN number and dash number. Example: AN395-41 is a 5/16dia. pin with an effective length of 1-9/32. Equivalent MS number is MS20392-4C41. Less 20% in lots of 25 per size. Request quotation on unlisted sizes. NOTE: Clevis pin prices fluctuate with changes in cost/availability at suppliers. AN396 AN395 AN394 AN393 Effective AN392 Dash Length MS20392 MS20392 MS20392 MS20392 MS20392 No. -1C 1/8 - 2C 3/16 -3C 1/4 - 4C 5/16 -5C 3/8 (In.) -7 7/32 $0.42 $0.39 ----9 9/32 $0.49 $0.48 ----11 11/32 $0.29 $0.47 $0.28 $0.49 --13 13/32 $0.41 $0.33 $0.68 ---15 15/32 $0.37 $0.61 $0.31 $0.82 --17 17/32 $0.41 $0.39 $0.48 $0.72 $0.64 -19 19/32 $0.32 $0.41 $0.56 $0.46 $0.88 -21 21/32 $0.54 $0.46 $0.36 $0.62 --23 23/32 $0.49 $0.48 $0.52 $0.59 $1.21 -25 25/32 $0.33 $0.36 $0.33 $0.74 $0.90 -27 27/32 $0.48 $0.45 $0.35 $0.62 $1.16 -29 29/32 $0.43 $0.39 $0.58 $0.80 --31 31/32 $0.40 $0.45 $0.57 $0.68 --33 1-1/32 $0.50 $0.47 $0.64 $0.81 $0.99 -35 1-3/32 $0.49 $0.62 $0.48 $0.92 $1.37 -37 1-5/32 $0.47 $0.62 $0.62 $0.70 --39 1-7/32 $0.76 $0.69 $0.68 $0.97 --41 1-9/32 $0.41 $0.34 $0.53 $0.70 $1.44 -43 1-11/32 $0.54 $0.56 $0.81 $1.16 --45 1-13/32 $0.92 $0.41 $0.60 $1.42 $0.73 -47 1-15/32 $0.67 $0.65 $0.67 $0.87 $1.54 -49 1-17/32 $1.10 $0.59 $0.46 ---51 1-19/32 -$0.68 $0.58 $0.82 --53 1-21/32 $0.56 $0.94 $0.67 $0.65 $0.88 -55 1-23/32 $0.72 $0.70 $0.74 -$4.80 -57 1-25/32 $0.74 $1.28 $0.63 $1.17 --59 1-27/32 $0.74 $0.81 $1.65 -$1.14 -61 1-29/32 $0.65 $1.37 $0.96 ---63 1-31/32 $0.59 $0.49 $0.56 $6.75 $0.72 -65 2-1/32 $0.64 $0.68 $0.63 -$1.16 -67 2-3/32 $1.83 $0.90 $0.95 -$1.17 -69 2-5/32 $0.98 $0.97 $1.54 $1.37 $1.14 -71 2-7/32 -$1.76 -$6.75 --73 2-9/32 -$3.45 $0.73 -$1.19 -75 2-11/32 --$0.82 -CALL -79 2-15/32 -$0.49 $3.95 -$1.25 -81 2-17/32 -$0.52 $0.87 -$9.50 -83 2-19/32 -$1.17 ----85 2-21/32 -$1.09 $1.09 $0.57 $0.81 -87 2-23/32 -$0.57 ----89 2-25/32 -$2.50 -$0.58 --91 2-27/32 ------93 2-29/32 -$0.64 --$1.43 -95 2-31/32 -$0.86 ---97 3-1/32 --$0.96 -$1.98 -99 3-3/32 ------101 3-5/32 .- ---$5.10 AN415-2 corrosion resistant steel wire cowl lock pins 1-15/16 long, .080 dia. wire. P/N AN415-2................................$0.44 Ea. $35.20 for 100 Commercial steel cadmium plated wire lock pins 1-1/4 long, .062 dia. wire. P/N 04-05100...............................$0.07 Ea. $5.60 for 100 Positive locking pins that can be readily used without aid of tools. Made of spring steel, cadmium plated, 1-1/16 long. .051 Wire Dia. .............. .AN416-1................$0.18 Ea. ........ .$14.40/100 .041 Wire Dia. .............. .AN416-2................$0.18 Ea. ......... $14.40/100 MS16562-200 PIN .......................... 02-00096........ $0.60 TUBULAR PIN MS16562-224......... 04-01715........ $0.79
LOCK PINS
AN386-1-6 .............................. $5.90 AN386-1-6A ............................ $6.25 AN386-1-7 .............................. $7.50 AN386-1-7A ............................ $6.95 AN386-1-8 .............................. $6.92 AN386-1-9 .............................. $8.30 AN386-1-9A ............................ $7.75 AN386-1-10A .......................... $5.80 AN386-1-11 ............................ $7.75 AN386-2-8 ............................ $14.90
AN386-2-9A ............................ $6.94 AN386-2-10 ............................ $9.65 AN386-2-12 .......................... $13.60 AN386-2-13 .......................... $11.85 AN386-2-14 ............................ $7.94 AN386-3-12 .......................... $13.40 AN386-3-12A .......................... $9.25 AN386-3-14 ............................ $9.80 AN386-4-13 .......................... $19.50
84
CM
100 COUNTERSUNK (CR9162) The self-plugging Cherry Blind Rivet is a 2-piece assembly - a hollow rivet and an inner member or stem, drawn into or through the hollow rivet. Cherry CR162 & CR163 series rivets are now replaced by CR9162 & CR9163 series rivets which are less expensive but do require the use of G-25B hand rivet gun with H-901-5-4C pulling head attached or G-29 which comes with the req. nosepiece. P/N 04-01515 Pulling Head (required) ....... $549.00 G-29 ..................P/N 12-00701 ........... $114.95 UNIVERSAL HEAD (CR 9163) Part No. CR9162-4-2 CR9162-4-4 CR9162-4-6 CR9162-4-8 CR9163-4-2 CR9163-4-4 CR9163-4-6 CR9163-5-2 Head Style Csk Nominal Dia. 1/8 Grip Range .063-.125 .188-.250 .313-.375 .438-.500 .063-.125 .188-.250 .313-.375 .063-.125 Each $0.20 $0.24 $0.42 $0.46 $0.20 $0.24 $0.26 $0.26 Price 100 1000 $18.00 $160.00 $21.60 $192.00 $37.80 $336.00 $41.40 $368.00 $18.00 $160.00 $21.60 $192.00 $23.40 $208.00 $23.40 $208.00
WP ME HA AP LG EP CS
Univ. Univ.
1/8 5/32
CHERRY N RIVETS
StructuralSelf-plugging rivets
CHERRY Q RIVETS
LOW COST
Substantial savings in installed costs can be realized when Cherry N Rivets are substituted for spotwelds, screws or bolts.
FAST INSTALLATION
Quick and easy to use with hand or power riveters, Cherry N Rivets have endless fastening applications in manufacturing, maintenance.
SEALING CAPABILITY
Specially designed mandrel of the Q Rivet is engineered to effect a seal, upon installation which offers resistance to leakage.
UNIQUE FEATURES
Unusual mandrel design of Cherry N Rivets holds rivet and mandrel firmly together prior to installation and insures positive mandrel retention in the installed rivet.
VIBRATION RESISTANT
Rivet sleeve curls over end of mandrel to insure its positive retention.
FLUSH HEAD
PROTRUDING HEAD
C = Stainless
IN EL AV TO PS
First letter is rivet material: A = 5052 Aluminum B = 5056 Aluminum M = Monel S= Steel Second letter is mandrel material: A = 7178 Aluminum S = Steel
C = Stainless C = Flush
FLUSH HEAD
PROTRUDING HEAD
Third letter is head style: P = Protruding L = Large Fourth letter is type of rivet: Q = Cherry Q Rivet, structural, self-plugging First number is rivet diameter in 32nds of an inch: For example,6 is 6/32nds or 3/16 diameter
First letter is rivet material: A = 5052 Aluminum B = 5056 Aluminum C = Stainless M = Monel S= Steel U = Copper Second letter is mandrel material: A = 7178 Aluminum S = Steel C = Stainless Third letter is head style: P = Protruding L = Large C = Flush First number is rivet diameter in 32nds of an inch: For example,4 is 4/32nds or 1/8 diameter Second number is rivet maximum grip length in 16ths of an inch: For example,6 is 6/16ths or 3/8 grip length
Second number is rivet maximum grip length in 1/16 of an inch: For example,8 is 8/16ths or 1/2 grip length
CHERRY N RIVETS
RIVET DIAM. MAND. 3/32 1/8 5/32 3/16 1/4 BS SERIES ALUM RIVET STEEL MAND. GRADE 19 Shear Tens 125 175 200 325 325 450 430 650 750 1050 MS SERIES MONEL RIVET STEEL MAND. GRADE 40 Shear Tens 200 300 350 525 600 900 750 1100 1450 2150 CC SERIES STAINLESS RIVET STAINLESS GRADE 51 Shear Tens 230 280 450 600 750 1000 1000 1300 1700 2250
CHERRY Q RIVETS
RIVET DIAM. 1/8 5/32 3/16 1/4 BS SERIES ALUM RIVET STEEL MAND. GRADE 19 Shear Tens 350 325 525 450 750 650 1250 1050 MS SERIES CC SERIES STAINLESS MONEL RIVET RIVET STAINLESS STEEL MAND. MAND. GRADE 51 GRADE 40 Shear Tens Shear Tens 650 525 700 600 950 900 1050 1000 1450 1100 1650 1300 2350 2150 2450 2250
BV
NOTE: SUBJECT TO PRICE AND AVAILABILITY OF CHERRY BRAND RIVETS. EQUIVALANT RIVETS MAY BE FURNISHED.
85
For conversion of the most frequently used Pop rivets to the corresponding CHERRY numbers, see the following table. NOTE: SUBJECT TO PRICE AND AVAILABILITY OF CHERRY BRAND RIVETS. EQUIVALANT RIVETS MAY BE FURNISHED.
Cherry Rivet Number BSP-41 BSPS-42 BSPS-43 BSPS-44 BSP-46 BSP-48 BSCS-34 BSC-43 BSC-44 BSC-46 MSP-32 -42 -43 -44 -45 -54 CCC-32 -42 CCP-32 CCP-42 CCP-43 -44 -46 SSP-42 -44 -45 04-01952 04-01953 SSC-43 SSC-44 04-01955 BSPQ-41 -42 -43 -44 -46 AAPQ-42 -44 CCPQ-43 CCPQ-44
WP ME HA AP LG EP CS IN EL AV TO PS BV
Grip is total of material thickness CHERRY Commercial rivets with maximum grip length greater than the material thickness may be substituted for a rivet of the required grip length.
BSC-34 AK43BS 44BS A46SC MD319BS 424BS 429BS 435BS 440BS 530BS MK319BS 424BS SSD42SSDS
30
41
20 41 30 30 30 30 30
N N
CSPS4-4 CSPS4-8 S44SC SSD32BS AD41H AD42H AD43H AD44H AD46H AD43H AD44H CCPQ-43 CCPQ-44
30 30
30 30
30 30 30 30
Price** Price Per Price for Price for 100 600 1000 15% 10% Discount 12% Discount Discount $3.60 $21.12 $34.00 $2.70 $15.84 $25.50 $2.70 $15.84 $25.50 $3.60 $21.12 $34.00 $4.50 $26.40 $42.50 $4.50 $26.40 $42.50 $5.40 $31.68 $51.00 $4.50 $26.40 $42.50 $2.70 $15.84 $25.50 $8.00 $45.00 $70.00 $10.80 $63.36 $102.00 $15.30 $89.76 $144.50 $15.30 $89.76 $144.50 $15.30 $89.76 $144.50 $20.70 $121.44 $195.50 $26.10 $153.12 $246.50 $9.90 $58.08 $93.50 $9.00 $52.80 $85.00 $13.50 $79.20 $127.50 $7.20 $42.24 $68.00 $7.20 $42.24 $68.00 $9.00 $52.80 $85.00 $10.80 $63.36 $102.00 $2.70 $15.84 $25.50 $3.60 $21.12 $34.00 $4.50 $26.40 $42.50 $28.80 $168.96 $272.00 $72.00 $422.40 $680.00 $3.60 $42.24 $68.00 $3.60 $21.12 $34.00 $22.50 $132.00 $212.50 $18.90 $110.88 $178.50 $12.60 $73.92 $119.00 $16.20 $95.04 $153.00 $24.30 $142.56 $229.50 $15.30 $89.76 $144.50 $14.40 $84.48 $136.00 $15.30 $89.76 $144.50 $27.90 $163.68 $263.50 $31.20 $175.50 $273.00
Price for Price for 3000 18% 10,000 Discount 20% Discount $98.40 $320.00 $73.80 $240.00 $73.80 $240.00 $98.40 $320.00 $123.00 $400.00 $123.00 $400.00 $147.60 $480.00 $123.00 $400.00 $73.80 $240.00 $195.00 $599.94 $295.20 $960.00 $418.20 $1,360.00 $418.20 $1,360.00 $418.20 $1,360.00 $565.80 $1,840.00 $713.40 $2,320.00 $270.60 $880.00 $246.00 $800.00 $369.00 $1,200.00 $196.80 $640.00 $196.80 $640.00 $246.00 $800.00 $295.20 $960.00 $73.80 $240.00 $98.40 $320.00 $123.00 $400.00 $787.20 $2,560.00 $1,968.00 $6,400.00 $196.80 $320.00 $98.40 $320.00 $615.00 $2,000.00 $516.60 $1,680.00 $344.40 $1,120.00 $442.80 $1,440.00 $664.20 $2,160.00 $418.20 $1,360.00 $393.60 $1,280.00 $418.20 $1,360.00 $762.60 $2,480.00 $760.50 $2,339.77
*All USM Pop rivets are 1/64 larger than nominal diameter. Presented here for cross reference purposes only. **Quotations on larger quantities.
Head Style
Part No. 1601-0410 1601-0414 1601-0613 1601-0619 04-01949 1604-0412 1604-0514 1604-0615 1661-0613 1661-0621
Dia. 1/8 1/8 3/16 3/16 5/32 1/8 5/32 3/16 3/16 3/16
Grip Range To .187 To .312 To .250 To .437 .046-.250 To .250 To .312 To .312 To .250 To .500
Each $0.07 $0.06 $0.06 $0.07 $0.11 $0.04 $0.07 $0.12 $0.15 $0.06
Price 100 $6.30 $5.40 $5.40 $6.30 $9.90 $3.60 $6.30 $10.80 $13.50 $5.40
1000 $56.00 $48.00 $48.00 $56.00 $88.00 $32.00 $56.00 $96.00 $120.00 $48.00
FLAT HEAD
Part No. NAS1329A06K75 NAS1329A06-75 NAS1329A06K120 NAS1329A06-120 NAS1329A08K75 NAS1329A08-75 NAS1329A08K120 NAS1329A08-120 NAS1329A3K80 NAS1329A3-80 AEA10K140 AEA10-140 Type Grip Range Length Keyed .010-.075 .438 Keyless .010-.075 .438 Keyed .075-.120 .500 Keyless .075-.120 .500 Keyed .010-.075 .438 Keyless .010-.075 .438 Keyless .075-.120 .500 Keyless .075-.120 .500 Keyed .010-.075 .438 Keyless .010-.075 .438 Keyed .075-.140 .500 Keyless .075-.140 .500 Thread Price/ea. 6-32 $0.16 6-32 $0.17 6-32 $0.26 6-32 $0.23 8-32 $0.22 8-32 $0.22 8-32 $0.36 8-32 $0.18 10-32 $0.23 10-32 $0.26 10-32 $0.49 10-32 $0.39
COUNTERSUNK HEAD
Part Number Grip Price Length Thread Range Each Keyed Keyless NAS1330A06K106 NAS1330A06-106 .065-.106 .500 6-32 $0.29 NAS1330A08K106 NAS1330A08-106 .065-.106 .500 8-32 $0.27
BLIND NUT PLATE - Installed Rivet Nut also serve as blind nut plates for simple screw attachments.
Spring loaded center punch works great with universal aluminum head rivets, oval head and round head rivets. P/N 12-02464 ...............$34.95
86
CHERRYMAX RIVETS
100 Countersunk Head (CR3242 & CR3212) Universal Head (CR3243 & CR3213)
CM WP ME HA AP LG EP CS IN EL
Due to the large bulbed blind head, similar to that of a solid rivet, the Cherrylock and CherryMax rivets are especially suited for double dimpled or high vibration applications. They can be used as replacements for some solid rivets and are excellent for use in fiberglass or composites as the rivet spreads in a way that prevents crazing or cracking of the material. NOTE: CR3212 & CR3213 are nominal diameters. CR3242 & CR3243 are oversized diameters and measure 1/64 more than listed diameter. Install with P/N 12-03105 G-27 Hand Gun. Dash # 4-1 4-2 4-3 4-4 4-5 4-6 5-2 5-3 5-4 5-5 5-6 6-10 Dia. CR3212 Grip Range ----.063-.125 .126-.187 .188-.250 .251-.312 .313-.375 .065-.125 .126-.187 .188-.250 .251-.312 .313-.375 .563-.625 CR3242 Grip Range .032-.063 .063-.125 .126-.187 .188-.250 .251-.312 .313-.375 .063-.125 .126-187 .188-.250 .251-.312 .313-.375 CR3213 Grip Range .025-.062 .063-.125 .126-.187 .188-.250 .251-.312 .313-.375 .063-.125 .126-.187 .188-.250 .251-.312 .313-.375 .563-.625 CR3243 Grip Range .025-.062 .063-.125 .126-.187 .188-.250 .251-.312 .313-.375 .063-.125 .126-.187 .188-.250 .251-.312 .313-.375 Each --$0.59 $0.64 $0.61 $0.56 $0.80 $0.71 $1.19 $0.82 $0.84 $1.06 $2.75 Each $0.82 $0.78 $0.65 $0.79 $0.96 $0.93 $0.79 $0.76 $0.83 $0.79 $0.99 Price 100 --$53.10 $57.60 $54.90 $50.40 $72.00 $63.90 $107.10 $73.80 $75.60 $95.40 $247.50 Price 100 $73.80 $70.20 $58.50 $71.10 $86.40 $83.70 $71.10 $68.40 $74.70 $71.10 $89.10
.126
.157 .189
Dash Dia. # 4-1 4-2 4-3 .140 4-4 4-5 4-6 5-2 5-3 5-4 .173 5-5 5-6
NOTE: SUBJECT TO PRICE AND AVAILABILITY OF CHERRY BRAND RIVETS. EQUIVALANT RIVETS MAY BE FURNISHED.
10% Discount for 5lbs. of rivets or more (per P/N) AD indicates Hard 2117 aluminum alloy. These rivets are heat treated and have a minimum tensile strength of 38,000 PSI. A indicates Soft 100 pure aluminum and have a minimum tensile strength of 16,000 PSI. Each kit contains 1/8 lb each of the following 12 sizes: 3/32 (3-4, 3-6, 3-8); 5/32 (5-4, 5-5, 5-6, 5-8); 1/8 (4-4, 4-6, 4-8); 3/16 (6-6, 6-8) Pack Pack Pack Pack C ........ AN470AD, Universal Hard .......P/N D ........ AN470A, Universal Soft ...........P/N E......... AN426AD, 100 CSK Hard ......P/N F ......... AN426A, 100 CSK Soft ..........P/N 04-00357 ... $31.00 04-00358 ... $29.00 04-00359 ... $32.75 04-00361 ... $34.00
Measures rivet diameter and length, P/N 12-00217 ...................... $8.75 Used to locate pre-drilled holes in the wing ribs, fuel tank covers, panels, skin. Pre-drill the ribs, screw in the back markers, lay the skin sheet over the top, tap with a hammer, turn the sheet over, and drill the holes. This is especially useful for rivnut installation. Due to the large size of the hole required, small errors in location can lead to the Oh darn, I missed the rib syndrome. Backmarkers can save you hours of frustration. Two sizes of threaded backmarkers are available. We recommend using the 04-00131 for wing ribs. Drilling the wing ribs with a 3/32 drill. Drop in the back markers. Mark the skin by taping with a soft hammer. Turn the skin over and drill the skin with a 3/32 drill. Cleco the skin into position enlarge the holes with #30 drill & cleco. Now you are ready to rivet. Nut Plate Marker Size Drill Size Part No. Price Ea. 10-32* 04-00117 $0.98 8-32* 04-00119 $0.98 3/8-24 .327 5/8 04-00121 $1.13 5/16-24 .265 1/2 04-00122 $1.15 1/4-28 .209 1/2 04-00123 $1.15 10-32 .154 3/8 04-00124 $0.98 8-32 .128 3/8 04-00127 $0.98 6-32 .102 3/8 04-00129 $0.98 $0.98 3/32 hole .093 3/8 04-00131
AV TO PS BV
HALF-SIZE LENGTH RIVETS - These flush head AN426 rivets are ideal
for those situations where one length is just too short & the next length is too long.
Part No. ................... Dia. .....Length ..Price Per 1/8 lb. AN426AD-3-3.5 .............. 3/32 ....... 7/32 ...................... $36.50 AN426AD-3-4.5 .............. 3/32 ....... 9/32 ...................... $30.50 AN426AD-3-5.5 .............. 3/32 ...... 11/32 ..................... $33.75
OVERSIZE SHANK RIVETS - These NAS1097 rivets feature a 1/8 diameter shank with a head size that of a 3/32 rivet. Perfect when rivet hole becomes enlarged requiring 1/8 shank but 3/32 head matches rest of your 3/32 rivets. Part No. .................Dia. .... Length Price Per 1/8 lb. NAS1097AD-4-3.5 1/8...... 7/32 ................. $28.75
NAS1097AD-4-4 ....... 1/8 ......... 1/4 ....................... $25.95 NAS1097AD-4-5 ....... 1/8 ........ 5/16...................... $26.50 NAS1097AD-4-6 ....... 1/8 ......... 3/8 ....................... $25.50
87
NUTSERTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
THREAD THREAD SIZE CALL OUT 4-40 UNC 440 6-32 UNC 632 8-32 UNC 832 10-24 UNC 1024 10-32 UNF 1032 1/4-20 UNC 420 1/4-28 UNC 420 5/16-18 UNC 518 5/16-24 UNC 518 3/8-16 UNC 616 1/2-13 UNC 813 HD .005 .211 .240 .269 .306 .306 .400 .400 .528 .528 .588 .800 L .015 .370 .370 .370 .370 .370 .515 .515 .615 .615 .745 .935 D MAX. .1875 .2185 .2495 .2805 .2805 .3745 .3745 .4995 .4995 .5615 .7485 IL MAX. .205 .205 .205 .205 .205 .275 .275 .325 .325 .390 .485 LB .015 .660 .675 .675 .685 .685 1.005 1.005 1.065 1.065 1.450 NA ILB MAX. .495 .505 .505 .520 .520 .760 .760 .770 .770 1.095 NA IATD** MAX. .395 .410 .410 .385 .385 .615 .615 .630 .630 .890 NA HOLE DEPTH MIN. .400 .400 .400 .400 .400 .540 .540 .640 .640 .770 .960 PART NO. ATS2-440 ATS2-632 ATS2-832 ATS2-1024 ATS2-1032 ATS2-420 ATS2-428 ATS2-518 ATS2-524 ATS2-616 ATS2-813 PRICE EACH $0.29 $0.27 $0.26 $0.38 $0.21 $0.38 $0.52 $0.87 $1.76 $0.78 $4.20 THREAD SIZE 4-40 UNC 6-32 UNC 8-32 UNC 10-24 UNC 10-32 UNF 1/4-20 UNC 1/4-28 UNC 5/16-18 UNC 5/16-24 UNC 3/8-16 UNC 1/2-13 UNC The A-T Series Insert is unique in that it can be installed into most any material above .030/,76 mm in thickness. As the A-T Series is installed, the threaded portion is completely swaged 360 into the sleeve portion and the hole. This permits the A-T Series to be used with Grade 8/metric 12.9 mating screws. The A-T Series Insert is installed using lightweight, hand held pneumatic tools that can be located at any position in your products assembly sequence. The A-T Series Insert can be installed either prior to or after finish.
The hi-torquer tool is ideal for field and maintenance applications. It features a patented Quick Change thread size nose assembly. Order one base tool plus appropriate conversion kit. No warranty on these tools.
THREAD CONV. KIT PRICE SIZE PART NO. EACH 4-40 UNC AAT-202-440 $29.75 6-32 UNC AAT-202-632 $29.50 8-32 UNC AAT-202-832 $29.50 10-24 UNC AAT-202-1024 $29.50 10-32 UNF AAT-202-1032 $29.75 1/4-20 UNC AAT-202-420 $29.50 1/4-28 UNC AAT-202-428 $31.75 5/16-18 UNC AAT-202-518 $29.50 5/16-24 UNC AAT-202-524 $29.50 3/8-16 UNC AAT-202-616 $29.25 Base tool, P/N AA-112...................$69.50
These expendable tools are ideal for applications such as field repair. They can also be packaged with instructions for use along with quantity of inserts for consumer assembly. Sizes 6-32, 8-32 include a hex key. Sizes 10-32,and larger require a wrench (not included). No warranty on these tools.
THREAD SIZE 4-40 UNC 6-32 UNC 8-32 UNC 10-24 UNC 10-32 UNF 1/4-20 UNC 1/4-28 UNC 5/16-18 UNC 5/16-24 UNC 1/2-13 UNC 3/8-16 UNC TOOL PART NUMBER AAT-916-440 AAT-916-632 AAT-916-832 AAT-916-1024 AAT-916-1032 AAT-916-420 AAT-916-428 AAT-916-518 AAT-916-524 AAT-916-813 AAt-916-616 PRICE EACH $9.50 $9.50 $9.50 $9.50 $9.50 $9.50 $9.50 $9.50 $9.50 $74.25
The A-T Series master assortment kit is ideal for prototype and maintenance repair applications. The rugged hard shell plastic kit contains quantities of the A-T Series Inserts and the AA 112 Hi-torquer tool. It also contains a full compliment of thread size conversion kits and instruction label. No warranty on these tools. KIT CONTAINS: THREAD NUTSERT QTY CONV. KIT SIZE PART NO. 4-40 UNC 50 ATS2-440 AAT-202-440 6-32 UNC 50 ATS2-632 AAT-202-632 8-32 UNC 50 ATS2-832 AAT-202-832 10-32 UNF 50 ATS2-1032 AAT-202-1032 1/4-20 UNC 50 ATS2-420 AAT-202-420 5/16-18 UNC 50 ATS2-518 AAT-202-518 Kit, P/N AAT312A..............................$219.95 Nutsert available. Sold Each.
88
DZUS FASTENERS
Oval Head Stud Flush Head Stud Wing Head Stud
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
S5A200, 225 250, 275 S6-225, 250, 275 300 S7-225, 250, 275, 300
(A, B, L dimensions for AJW are same as for AJ; P, Q, R dimensions given are for wing head) Model No. 121J-W325-Z3C 121J-W330-Z3C 121J-W335-Z3C 121J-W340-Z3C 121J-W425-Z3C 121J-W430-Z3C 121J-W435-Z3C 121J-W440-Z3C 121J-W530-Z3C 121J-W540-Z3C 121J-W545-Z3C 121J-W550-Z3C Stud A .1875 .1875 .1875 .1875 .250 .250 .250 .250 .3125 .3125 .3125 .3125 Dimensions B L .075 .250 .100 .300 .150 .350 .200 .400 .100 .250 .100 .300 .150 .350 .200 .400 .125 .300 .190 .400 .200 .450 .250 .500 Zinc Electroplated Stainless Model No. GROMMETS & SNAP RINGS SPRINGS Cat. # Price Each Cat. # Price Each AJW3-25* $3.85 AJW3-25SS* $3.00 GA3-175, 200, 250 AJW3-30 $3.85 GP3B, GH3 S3-150, 175 SR3SS 200, 225 AJW3-35* $3.97 SX-520SS AJW3-40 $4.10 AJW4-25* $3.70 GA4-225, 250, 275, 300 AJW4-30 $1.91 GP4B, GH4 S4-200, 225 SR4SS AJW4-35* $2.15 SX-523SS AJW4-40 $3.10 AJW5-30 $1.60 GA5-312, 350, 375 AJW5-40 $1.55 SR5SS S5A200, 225 AJW5-45* $3.40 SX-510SS AJW5-50 $2.70 -
89
DZUS FASTENERS
STUD AND SPRING SELECTION TABLES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
1. Find total thickness (distance) from underside of stud head to point of spring attachment). 2. Select stud L and spring H dims. Size 3 Stud, S3 Spring USE Total Stud Spring Thickness Dim. L Dim, H .045 - .069 -25 -225 .070 - .094 -25 -200 .095 - .119 -30 -225 .120 - .144 -30 -200 .145 - .169 -30 -175 .170 - .194 -30 -150 .195 - .219 -35 -175 .220 - .224 -35 -150 .245 - .269 -40 -175 .270 - .294 -40 -150 Size 4 Stud, S4 Spring USE Total Stud Spring Thickness Dim. L Dim. H .050 - .074 -25 -225 .075 - .099 -25 -200 .100 - .124 -30 -225 .125 - .149 -30 -200 .150 - .174 -35 -225 .175 - .199 -35 -200 .200 - .224 -40 -225 .225 - .249 -40 -200 .250 - .274 -45 -225 .275 - .299 -45 -200 .300 - .324 -50 -225 .325 - .344 -50 -200 Size 6 Stud, S6 Spring Size 7 Stud, S7 Spring USE Total Stud Spring Thickness Dim. L Dim. H .090 - .114 -35 -300 .115 - .139 -35 -275 .140 - .164 -35 -300 .165 - .189 -40 -275 .190 - .214 -40 -250 .215 - .239 -40 -225 .240 - .264 -50 -300 .225 - .249 -40 -200 .265 - .289 -50 -275 .290 - .314 -50 -250 .315 - .339 -50 -225 .340 - .364 -60 -300 .365 - .389 -60 -275 .390 - .414 -60 -250 .415 - .439 -60 -225 .440 - .464 -70 -300 .465 - .489 -70 -275 .490 - .514 -70 -250 .515 - .539 -70 -225
SPRINGS
Model No. Part No. Price Ea. Model No. Part No. Price Ea. 1219-3175-Z3Y S3-175 $0.35 1219-5300-Z3Y S5A-300 $1.24 1219-3200-Z3Y S3-200 $0.42 1219-6225-Z3Y S6A-225 $1.53 1219-3225-Z3Y S3-225 $0.39 1219-6250-Z3Y S6A-250 $0.97 1219-4220-Z3Y S4-200 $0.36 1219-6275-Z3Y S6A-275 $0.56 1219-4225-Z3Y S4-225 $0.50 1219-6300-Z3Y S6-300 $1.62 1219-4250-Z3Y S4-250 $0.35 1219-6400-Z3Y S6A-400 $1.54 1219-A4200-Z3Y S4A-200 $0.36 1219-6425-Z3Y S6A-425 $0.89 S5-325$7.50 1219-6325-Z3Y S5A-325 $1.33 SURP 1219-A5200-Z3Y S5A-200 $0.56 1219-7225-Z3Y S7-225 $1.47 1219-A5225-Z3Y S5A-225 $0.38 1219-7250-Z3Y S7-250 $1.83 1219-A5250-Z3Y S5A-250 $0.37 1219-7275-Z3Y S7-275 $1.19 1219-A5275-Z3Y S5A-275 $1.35 1219-7300-Z3Y S7-300 $0.75 The dash number represents the height (H dimension) of the spring. A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required for installation. The GA type full grommet is used with a protruding head stud, and the GF type with a flush head stud.
FULL GROMMETS
Size 5 Stud, S5A Spring USE Total Stud Spring Thickness Dim. L Dim, H .055 - .079 -30 -275 .080 - .104 -30 -250 .105 - .129 -30 -225 .130 - .154 -30 -200 .155 - .179 -40 -275 .180 - .204 -40 -250 .205 - .229 -40 -225 .230 - .254 -40 -200 .255 - .279 -50 -275 .280 - .304 -50 -250 .305 - .329 -50 -225 .330 - .354 -50 -200 .355 - .379 -60 -275 .380 - .404 -60 -250 .405 - .429 -60 -225 .430 - .454 -60 -200 .455 - .479 -70 -275 .480 - .504 -70 -250 .505 - .529 -70 -255 .530 - .554 -70 -200 Part No. 04-01441 04-01410 04-01409 04-01442 04-01413 04-01447 04-01637
ALUMINUM
Outer Panel Thickness .015 - .025 .026 - .050 .051 - .094 .015 - .025 .026 - .050 .051 - .075 .076 - .100 .031 - .062 .063 - .094 .095 - .125 .040 - .065 .066 - .100 .101 - .135 .050 - .095 .096 - .156 .157 - .218 Type GA Model No. Part No. 1271-3175 GA3-175 1271-200 GA3-200 1271-250 GA3-250 --GA4-225 1271-4250 GA4-250 1271-4275 GA4-275 1271-4300 GA4-300 1271-5312 GA5-312 1271-5350 GA5-350 1271-5375 GA5-375 1271-6350 GA6-350 1271-6375 GA6-375 1271-6425 GA6-425 1271-7375 GA7-375 --GA7-475 1271-7525 GA7-525 Price $2.95 $3.30 $1.10 -$1.21 $2.75 $2.50 $1.40 $0.47 $1.34 $0.54 $3.20 $3.15 $3.60 ----Type GF Model No. Part No. --N/A --N/A --N/A 1276-4125 GF4-125 1276-4150 GF4-150 1276-4175 GF4-175 1276-4200 GF4-200 1276-5175 GF5-175 1276-5225 GF5-225 1276-5250 GF5-250 --GF6-218 1276-6250 GF6-250 ----1276-7250 GF7-250 --GF7-325 1276-7400 GF7-400 Price ------$2.25 $1.73 $2.90 $2.20 $2.40 $2.45 $2.35 --$0.49 --$4.85 --$5.95
INSTALLATION TOOLS
Description (Installs:) Price A, AJ3 Oval Head Studs & Grommets $47.50 A4,AJ4 Oval Head Studs & Grommets $47.50 A5,AJ5 Oval Head Studs & Grommets $47.50 A6.5,AJ6.5 Oval Head Studs&Grommets $57.50 A7, AJ7 Oval Head Studs & Grommets $199.95 F5, FJ5 Flush Head Studs & Grommets $47.50 F6.5,FA6.5,FJ6.5 Flush Head Studs & Grommets $49.75
* Note: A5 tool is specially designed to install grommets in Bonanza cowlings without removing cowling brackets. This will save you alot of time.
A half grommet does not break easily, and it flattens but guarantees hold of the stud. It is used when protection of the hole is not a consideration, but protection of panel finish might be. The GH type half grommet is installed with a tool; the GP type is pushed on by hand. Type GP Thermoplastic Type GH Aluminum Model No. Part No. Price ea Model No. Part No. Price ea 127P-3B GP3B $0.10 127H-3 GH3 $0.10 127P-4B GP4B $0.10 127H-4 GH4 --127P-5B GP5B $0.10 127H-5 GH5 $0.09 127P-6B GP6B $0.14 127H-6 GH6 $0.13 127P-7B GP7B --127H-7 GH7 $0.25
HALF GROMMETS
Description Modified C-Clamp (Required and Accepts All Attachment Sets) When there is a gap between the top and bottom panels, a retaining spring is used to hold the stud in locking position for alignment with receptacle. A snap ring is used when there is not a lot of pullout load. This ring is expandable easily installed with pliers or screwdriver and takes little space.
Part No.
Price
12-02272 $42.95
RETAINING SPRINGS
Model No. 1219-24520-SS 1219-24523-SS 1219-24510-SS 1219-24518-SS 1219-24519-SS Part No. Price ea SX-520SS $0.34 SX-523SS $0.17 SX-510SS $0.18 SX-518SS $0.67 SX-519SS $0.55
SNAP RINGS
Model No. 1219-R3-SS 1219-R4-SS 1219-R5-SS 1219-R6-SS 1219-R7-SS Part No. SR3SS SR4SS SR5SS SR6SS SR7SS Price ea $0.08 $0.09 $0.10 $0.08 $0.12
The MS-7301 tool easily adjusts Dzus fastener springs for a perfect fit every time. Great for Warbirds and vintage aircraft. Bend springs in or out with a few simple turns. P/N 04-00957 ................. $43.00 The MS-Driver is a great tool for locking and unlocking Dzus fasteners. The large handle gives you plenty of torque and is comfortable in the hand. The blade has a radius end to fit fastener slots better than a standard screwdriver and is heat treated steel with zinc plating for long life. P/N 04-00958 ...................$18.95
DZUS DRIVER
90
CAMLOC FASTENERS
The 2600 and 2700 series Camloc fasteners exceed requirements for MIL-F-5591, Style 3, Size 2. Shear and tensile strength: 300 lbs. (ultimate), 200 lbs. (rated). Studs and washers listed are made of steel. The receptacles are made of copper base alloy. All components listed are rated to 450 F. The 4002 series fasteners are considerably stronger than the 2600 and 2700 series. Shear and tensile strength: 1050 lbs. (ultimate), 700 lbs. (rated). All studs and grommets listed are made of steel. Rated to 450 F. Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness of the material P to which the stud assembly is attached, the material F to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration. P (panel thickness) .................... .062 F (frame thickness .................. + .062 GRIP (total thickness) ............. = .124
P+F = G
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
STUD SELECTION TABLE Using 212-12 Receptacle Total Grip Use Use Thickness 2600 2700
.020 .060 .090 .120 .150 .180 .210 .240 .270 .300 .330 .360 .390 .420 .059 .089 .119 .149 .179 .209 .239 .269 .299 .329 .359 .389 .419 .449 2600-1 2600-2 2600-3 2600-4 2600-5 2600-6 2600-7 2600-8 2600-9 2600-10 2600-11 2600-12 2600-13 2600-14 2700-1 2700-2 2700-3 2700-4 2700-5 2700-6 2700-7 2700-8 2700-9 2700-10 2700-11 2700-12 2700-13 2700-14
2600
2700
2600 WING
4002 WING
2600 STUDS
CAD Plated Stainless Dash No. 2600 Slot 26S8 Phillips Dash 2600 Slot Price Ea Price Ea No. Price Ea -1 $3.60 $2.60 -1S $4.20 -2 $3.40 $2.35 -2S $4.15 -3 $3.05 $2.45 -3S $4.15 -4 $1.98 $2.35 -4S $3.80 -5 $2.20 $1.70 -5S $3.90 -6 $3.89 $2.35 -6S $4.15 -7 $3.50 $2.85 -7S $3.80 -8 $3.10 $3.70 -8S $4.25 -9 $2.65 $3.95 -9S $3.45 -10 $3.75 $2.20 -10S $4.10 -11 $4.20 -------12 $3.90 -------13 $3.40 -------14 $4.20 $3.90 ----CAD Plated Wing Price CAD Plated Each ----2600-2W $7.70 2600-3W $4.75 2600-4W $6.25 2600-5W $6.30 2600-6W $7.75 2600-7W $5.35 2600-8W $11.75 2600-9W $8.11 2600-10W $5.75 2600-11W $7.90 2600-12W $6.75 ----2600-14W $7.75 Stainless 2700 Slot Price Ea -1S $3.80 -2S $3.95 -3S $3.55 -4S $3.15 -5S $3.70 -6S $3.90 -7S $3.95 -8S $4.10 -9S $4.95 -10S $4.15 -------------
2700 STUDS
Dash No. -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -13 -14 CAD Plated 2700 Slot 27S3 Phillips Price Ea Price Ea $3.90 $2.98 $3.40 $4.05 $2.98 $3.35 $3.70 $3.25 $3.05 $2.60 $3.75 $3.10 $3.75 $3.40 $3.60 $4.10 $3.95 $2.95 $2.95 $2.65 $2.55 --$4.45 --$4.15 $4.10 Dash No.
4002 STUDS
CAD Plated / Stainless
Dash 4002 CAD 40S5 CAD Plated No. Plated Slot Phillips Price Ea Price Ea SS Phillips 40S5 4002 SS Price Dash Slot Each No. Price Ea Wing CAD Plated Price Each
$5.25 $3.45 $3.25 $3.05 $3.25 $3.70 $3.75 $3.70 $3.70 $3.95 $3.95 $3.70 $3.60 $3.97 $4.45 $4.60
40S5-2S $3.60 40S5-3S $3.97 40S5-4S $3.80 40S5-5S $4.45 40S5-6S $4.20 40S5-7S $4.25 40S5-8S $5.25 40S5-9S $5.25 40S5-10S $5.25 -----------------------------
4002-2W 4002-3W 4002-4W 4002-5W 4002-6W --4002-8W 4002-9W 4002-10W 4002-11W 4002-12W -----------
$9.50 $7.75 $7.75 $6.95 $7.25 --$7.90 $10.00 $8.25 --$7.95 -----------
2600 Series - Small enough to fit in limited mounting space and light weight. All of these fasteners have a 600# ultimate tensile load capacity. 4200 Series - The Modern Standard in Quick Release Fastening Systems. They have an 800# working strength and 1050# Ultimate Tensile load capacity. Rivet 2600, 2700 Series Price 4002 Series Price Holes Part No. Each Part No. Each Plain 212-12N $2.50 214-16N $3.35 Cntersunk 212-12ND* $3.10 214-16ND* $4.35 Plain Floating Bronze 244-16 $4.10
RECEPTACLES
91
CAMLOC FASTENERS
COWLING KITS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Slotted Price
Price
$1,045.00 $665.00 $192.95
04-00339 B
$116.95
04-00341 B 04-00342 B
$196.95 $106.95
04-00343 B 04-00344 B 04-01943 B 04-00347 B 04-00348 B 04-00349 B 04-00351 B 04-00352 B 04-00353 B 04-00354 B 04-00355 B
$172.95 $128.95 $242.95 $137.95 $156.95 $807.00 $597.00 $466.95 $556.00 $456.95 $794.00
Kit contains Southco or Camloc studs, washers, and retainers. The retainer push on tool is only included in Southco Kits. Receptacles are not included. A is for Southco. B is for Camloc. The nose cowl components, if applicable, are not included in any cowling kit.
For 2600/2700/2800 Series C-Spec Fasteners. Any one stud length fits a wide range of panels. The MS213 is an exact replacement for 212-12 receptacles. Standard aluminum MS213A receptacles are lighter than 212 fixed depth receptacles with no sacrifice in strength ratings. Economical. Simply inventory one stud length for all applications. Fully compatible with existing C-Spec (Camloc) designs. FAA approved for aircraft use under TSOC-148. Part No. 04-02069 04-02070 04-02071 04-02072 04-02073 04-02074 Price $5.50 $5.75 $6.25 $5.75 $5.50 $6.25
Description Receptacle, 2600/2700/2800, Rigid Receptacle, Adjustable Depth, Plain Rivet Holes, Aluminum Receptacle, 2600/2700/2800, Rigid Receptacle, Adjustable Depth, Plain Rivet Holes, Aluminum, Dimpled Receptacle, 2600/2700/2800, Adjustable Depth, Rigid Receptacle, Plain Rivet Holes, Stainless Steel Receptacle, 2600/2700/2800, Adjustable Depth, Rigid Receptacle, Csk Rivet Holes, Aluminum, Dimpled Receptacle, 2600/2700/2800, Adjustable Depth, Rigid Receptacle, Plain Rivet Holes, Steel Receptacle, 2600/2700/2800, Adjustable Depth, Rigid Receptacle, Csk Rivet Holes, Stainless Steel, Dimpled
MEASURING TOOL
This handy tool is all stainless steel and engraved with Camloc fastener RECEPTACLE DRILL JIG For 4002 Series and 2600/2700 lengths from -2 to -11. Simple slide the Camloc fastener into the tool to Series receptacles P/N 01-00155 ................ $41.70 determine the size (dash number) of the Camloc. P/N 12-01598 .........................$16.85
92
SOUTHCO FASTENERS
FLUSH SLOTTED OVAL SLOTTED
SOUTHCO STUDS
OVAL PHILLIPS FLUSH PHILLIPS
WING HEAD
CM WP
Flush Head #82 Dacrotized Slotted Part No. Price 82-14-120-16 $0.96 82-28-160-16 $1.29 Flush Head #82 Stnls Phillips Part No. Price 82-28-100-16 $0.78 82-28-120-16 $0.70 82-28-140-16 $0.78 82-28-160-16 $1.29 82-28-180-16 $0.78 82-28-200-16 $0.78 82-28-220-16 $0.75 82-28-240-16 $0.76 82-28-260-16 $0.78 82-28-280-16 $0.73 82-28-300-16 $0.73 82-28-320-16 $0.73 82-28-340-16 $0.73
Oval Head #82 Stnls Slotted Part No. Price 82-11-100-20 $1.14 82-11-120-20 $0.97 82-11-140-20 $1.81 82-11-160-20 $1.81 82-11-180-20 $1.85 82-11-200-20 $1.83 82-11-220-20 $1.14 82-11-240-20 $1.85 82-11-280-20 $0.92 Oval Head #82 Dacrotized Slotted Part No. Price 82-11-100-16 $0.82 82-11-120-16 $1.30 82-11-140-16 $1.31 82-11-160-16 $1.38 82-11-180-16 $1.38 82-11-200-16 $1.28 82-11-220-16 $0.73 82-11-240-16 $1.31 82-11-260-16 $1.30
Oval Head #82 Stnls Phillips Part No. Price 82-19-120-20 $1.01 82-19-140-20 $0.98 82-19-160-20 $0.83 82-19-180-20 $1.17 82-19-200-20 $1.84 82-19-220-20 $1.17 Oval Head #85 Stnls Slotted Part No. Price 85-11-100-20 $0.63 85-11-140-20 $1.96 85-11-160-20 $1.96 85-11-180-20 $1.95 85-11-200-20 $1.21 85-11-220-20 $1.20 85-11-240-20 $1.13 85-11-260-20 $1.26 85-11-280-20 $1.95 85-11-300-20 $2.10
Wing Head #85 Zinc plate, chromate plus sealer Part No. 85-12-140-16 85-12-160-16 85-12-180-16 85-12-200-16 85-12-220-16 85-12-240-16 85-12-260-16 85-12-280-16 85-12-300-16 85-12-320-16 85-12-340-16 85-12-360-16 85-12-380-16 85-12-400-16 Price $1.00 $0.93 $0.98 $0.93 $1.64 $0.93 $0.93 $0.93 $0.93 $0.93 $0.93 $0.93 $0.93 $0.93
Wing Head #82 Dacrotized Part No. 82-12-100-16 82-12-120-16 82-12-140-16 82-12-160-16 82-12-180-16 82-12-200-16 82-12-220-16 82-12-240-16 82-12-300-16 82-12-340-16 Price $1.56 $1.71 $1.56 $1.55 $1.56 $0.86 $1.18 $1.57 $1.56 $0.97
ME HA AP LG EP CS IN EL AV TO PS BV
#85 RECEPTACLES
P/N 85-35-295-15 .......... $1.13
Southco studs are commonly used to secure Material Thickness Cessna cowlings, particularly on models 150, Thickness Size 172, and 177. We stock the popular Southco .090 - .109 100 No. 82 1/4 turn fastener studs, receptacles, .110 - .129 120 and accessories. .130 - .149 140 TO DETERMINE PART NO. .150 - .169 160 Select Stud part number using chart .170 - .189 180 above. Example: .190 - .209 200 82 - 14 - 220 - 16 .210 - .229 220 .230 - .249 240 Southco Head Stud Material .250 - .269 260 Fastener Type Length Type Number (Slotted) (Dacrotized) .270 - .289 280 SOUTHCO SEALING WASHER This black synthetic washer is used under head of Southco Studs.............P/N 82-43-201-38 ...........$0.20/ea SOUTHCO EJECTOR SPRING This stainless steel spring enables the stud head to stand away from the panel when the unit is not fastened. When using the ejector spring, add two grip lengths to stud length to allow for spring and wear washer. .....P/N 43-13-1-24 ...............$0.12/ea SOUTHCO WEAR WASHER A plastic washer to reduce wear around the Southco stud.When using wear washer add one grip length to stud length selection. P/N 82-46-101-39 ................................$0.14/ea. SOUTHCO SPLIT RING RETAINER Can be installed by hand or tool, and is fabricated from stainless steel. P/N 82-32-101-20 ...........$0.09/ea SOUTHCO SPLIT RING RETAINER TOOL - Designed to install Southco split ring retainers. P/N 82-0-7596-11 ...............................$27.65/ea SOUTHCO PUSH-ON RETAINER designed for installation using the retainer tool below. Stainless........P/N 82-32-201-20 ...........$0.08/ea Plastic............P/N 82-32-301-12 ...........$0.09/ea SOUTHCO PUSH-ON RETAINER TOOL An easy-to-use tool quickly installs Southco push-on retainers P/N 82-0-22542-11 ......$18.75/ea SOUTHCO PUSH-ON RETAINER TOOL - An easy-to-use tool quickly installs Southco 85 Series push-on retainers. P/N 85-0-22543-11 ...........$39.25
Stud Length Selection Chart
RECEPTACLE SPRING: 17-7 PH, stainless steel, passivated BASE: 305 stainless steel, passivated. P/N 85-35-295-20 ..... $3.10/ea WELD TYPE - Receptacle Spring: 1064 steel, dacrotized Base: 1010 steel, dacrotized Rivet: steel, copper-plated. P/N 85-35-296-15 ..... $2.75/ea CLIP-ON TYPE - 17-7 PH stainless steel, passivated.
P/N 85-47-101-20 ..... $1.49/ea
Split Ring Hand or tool installation. Stainless steel. P/N 85-34-101-20 .................................$0.13/ea Push-On Tool installation only. 302 Stainless Steel, Passivated P/N 85-34-201-20 .................................$0.13/ea Nylon Black .P/N 85-34-301-12 ...........$0.10/ea
#85 RETAINERS
Natural color. Order stud one size longer than size you would use without washer. Adjustment Formula: Add 0.51/.020 to your total material thickness. P/N 85-46-101-39 .................................$0.15/ea
93
STUD KITS
Click Bond studs are available in several sizes. The Metal Small Base Stud Kit includes six CS621032-12AX-CR aluminum small base stainless studs, six stainless nylocks/washers (10-32), one adhesive packet, surface preparation materials, and instructions. The Metal Large Base Stud Kit includes four CS125-1420-16AXCR aluminum large base stainless studs, four stainless nylock/washers (1/4-20), one adhesive packet, surface preparation materials, and instructions. The Fiberglass Base Stud Kit includes two CS125-103212G-CR fiberglass large base stainless studs, two stainless nylocks/ washers (10-32), one adhesive packet, surface preparation materials, and instructions. Metal Small Base Stud Kit................ P/N 04-06020.................... $9.65 Metal Large Base Stud Kit ............... P/N 04-06025.................. $11.85 Fiberglass Base Stud Kit .................. P/N 04-06030.................. $15.75
BLIND NUTS
$ EA THREAD P/N
LOCKING NUTS
$ EA THREAD P/N $ EA
10-32 04-06335 $3.20 10-32 04-06355 $3.25 10-32 04-06375$3.35 1/4 - 2004-06340 $2.85 1/4 - 20 04-06360 $3.60 1/4 - 28 04-06380$3.35 1/4 - 28 04-06385$3.35
94
AIRLOC FASTENERS
A-Lock fasteners are common to Beechcraft airplanes and latches on many cowlings. The design consists of a simple stud, with a pin pressed into the shank. The pin is installed after inserting the stud through the panel hole and removed prior to removing the stud. Some installations use a grommet in the fastener hole. Unlike other fasteners, the grommet does not usually require replacement when installing new studs. Base part numbers indicate stud diameter and head style. A-Lock studs are made in several blank lengths indicated by the first dash number in the charts. Each blank length can have up to 10 second dash numbers or grip sizes. The second dash number indicates the maximum grip range in .010 increments. Milspec primarily stocks sizes common to Beech aircraft in stainless steel for repacement purposes. To remove an A-Lock stud, simply clip or remove the pin enough to back the stud out of the hole. New pins are pressed in using special pliers, or by modifying standard vice grip pliers. Drill or cut one jaw of the vice grip to allow proper relief for the pin. If new grommets are required, a flaring tool is necessary (see below). For new installations, cross pins are required. MS P/N 112060-1-060 112060-1-080 112060-1-090 294186-1-080 294186-1-100 294186-2-180 294186-2-190 294186-2-200 294186-2-210 294186-2-230 294186-2-240 294186-2-250 294290-1-080 294290-1-090 294290-2-170 Our P/N 04-00931 04-00933 04-00934 04-00936 04-00937 04-00938 04-00939 04-00940 04-00941 04-00942 04-00943 04-00944 04-00945 04-00946 04-00947 Size/Head Grip Style #2 Flush .051-.060 #2 Flush .071-.080 #2 Flush .081-.090 #5 Flush .071-.080 #5 Flush .091-.100 #5 Flush .171-.180 #5 Flush .181-.190 #5 Flush .191-.200 #5 Flush .201-.210 #5 Flush .220-.230 #5 Flush .231-.240 #5 Flush .241-.250 #5 Round .071-.080 #5 Round .081-.090 #5 Round .161-.170 A .200 .220 .230 .267 .287 .367 .377 .387 .397 .417 .427 .437 .267 .277 .357 Total Length .359 .359 .359 .500 .500 .609 .609 .609 .609 .609 .609 .609 .500 .500 .609 Price $3.65 $3.60 $3.75 $4.60 $3.55 $3.70 $3.55 $3.65 $4.20 $3.55 $3.60 $3.60 $3.60 $3.60 $3.60
CM WP ME
STC approved cowling fastener upgrade kit for B33 and B35 aircraft. Kit is stainless steel and uses MilSpecs exclusive adjustable depth receptacles for an easy , yet very precise fit. The finish on this fastener is bright and shiny. Complete, easy to follow instructions and STC copy included with kit. Note: Two tools are required for the 40 series kits (Camloc Pliers and 4002 Series Snap Ring Tool). One tool is required for the 28 series kits (2600-LW Lockwasher Tool). Beech Kit No. Model 33 04-00966 35 33 04-00967 35 33 04-00968 35 33 04-00969 35 33 04-00971 35 36 33 04-02080 35 36 Serial No. Description Price CD1-350 Gill conversion 2700 series $202.95 D1-6567 Slotted head (looks original) CD1-350 Gill conversion 27S3 series $215.95 D1-6567 Phillips head All Main Cowling Conversion $98.50 D1-9068 4002 Series Slotted head All Main Cowling Conversion $127.95 D1-9068 40S5 Series Phillips head CD351-on Gill Conversion D6562-on 4002 Series $228.95 E1 -on Phillips head Lower Grill Door (Check CD351 On Panel) $228.95 D6568 On Upgrade 4002 Series Slotted E1 On C-Spec
HA AP LG EP CS IN EL AV TO PS BV
A-LOCK RECEPTACLES
(SOLID RECEPTACLE)
Model Year
Series #2 #5
Solid Rec. Our Price Countersink Part No. ea. 99871-C098 04-00951 $5.50 99833-C098 --Call 99833-C130 --Call
C172H-P
67-81
A-LOCK RECEPTACLES
(FLOATING RECEPTACLE)
Series #2 #5 Rivet Float. Rec. Our Price Float. Rec. Our Price Spacing Plain Part No. ea. Countersink Part No. ea. 3/4 --Call 99967-C098 -Call 99947-P098 04-00954 $5.25 99947-C098 04-00956 $5.35 1 99947-P130 04-00955 $2.80 99947-C130 -Call May not require replacement when installing new Series Panel Thick. Flush Head Part No. up to .040 295846-1 04-00962 #2 .041-.080 295846-2 04-00963 .041-.121 295250-2 04-00964 #5 .122-.201 295250-5 04-00965 These tools are required for replacing any A-Lock grommet. MS P/N MS29693/29695 MS9529/29667 MS9529/29770 Our P/N 04-00959 04-00960 04-00961 Type #2 Flush #5 Flush #5 Round
C172P-Q
82-86
C172XPXPII Model
77-81
A-LOCK GROMMETS
Year
71-78
Model C182
Year 56-60
C182P-R
73-86
95
AN FITTINGS
The aircraft fittings shown on the following pages conform to current AN and MS specifications. We stock aluminum, brass and/or steel fittings. Fittings not regularly stocked can be special ordered. Order by Part Number. Example: AN840-8D.
CM
AN804
WP ME HA AP LG EP CS IN EL AV TO PS BV
Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Size No. Brass Alum. 4 4D 6 6D 8 8D Hose I.D. 1/4 3/8 1/2 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4
AN815
UNION, FLARED TUBE
Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube Thread Price Each O.D. Size Steel Alum. 1/8 5/16-24 $10.75 $3.10 3/16 3/8-24 $7.50 $2.80 1/4 7/16-20 $8.46 $2.20 5/16 1/2-20 $5.25 $2.80 3/8 9/16-18 $6.83 $2.80 1/2 3/4-16 $3.40 $2.10 5/8 7/8-14 $12.50 $4.30 3/4 1-1/16-12 $13.75 $9.78 Size No. Tube Thread Size Steel Alum. O.D. 2 2D 1/8 5/16-24 3 3D 3/16 3/8-24 4 4D 1/4 7/16-20 5 5D 5/16 1/2-20 6 6D 3/8 9/16-18 8 8D 1/2 3/4-16 10 10D 5/8 7/8-14 12 12D 3/4 1-1/16-12
AN818
NUT, COUPLING
Price Steel $1.21 $1.18 $1.53 $1.72 $1.59 $2.40 $2.65 $4.15 Each Alum. $0.99 $0.47 $0.66 $0.78 $0.89 $1.38 $1.84 $3.10
AN816
NIPPLE, FLARED TUBE AND PIPE THREAD
Size Steel 2 3 4 4-4 5 6 6-2 6-6 7 8 10 12 No. Tube Pipe Price Alum. O.D. Size Steel 2D 1/8 1/8 $7.25 3D 3/16 1/8 $4.97 4D 1/4 1/8 $5.75 4-4D 1/4 1/4 $5.63 5D 5/16 1/8 $7.25 6D 3/8 1/4 $4.35 6-2D 3/8 1/8 $8.00 6-6D 3/8 3/8 $5.25 7D 1/2 1/4 $6.95 8D 1/2 3/8 $6.50 10D 5/8 1/2 $13.75 12D 3/4 3/4 $22.75 Each Alum. $1.75 $1.67 $1.48 $1.63 $2.35 $2.85 $2.35 $2.20 $3.10 $3.35 $3.20 $6.75
AN819 (MS20819)
SLEEVE, COUPLING
Size Steel 2 3 4 5 6 8 10 12 No. Alum. 2D 3D 4D 5D 6D 8D 10D 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Price Each Steel Alum. $0.80 $0.61 $1.02 $0.48 $0.74 $0.46 $0.76 $0.76 $1.35 $0.82 $1.64 $0.85 $2.50 $1.56 $5.25 ---
AN807
ADAPTER HOSE TO UNIVERSAL
Price Each Thread Size Brass Alum. 7/16-20 $23.00 $10.50 9/16-18 --$10.75 3/4-16 - - - $16.75
AN814
PLUG AND BLEEDER, SCREW THREAD
Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 Price Each Steel Alum. --$2.70 $9.25 $1.59 $9.50 $3.15 $10.46 $2.70 $7.50 $2.40 $11.75 $4.45 --$6.95 $19.90 $6.50 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4
AN821
ELBOW, FLARED TUBE, 90
Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 Price Steel --$14.25 $7.38 $16.00 $13.50 $19.93 $32.25 --Each Alum. $12.37 $7.25 $6.50 $9.82 $6.64 $9.75 $10.50 $15.50 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16
AN806
FLARED TUBE PLUG
Price Steel $5.38 $3.95 $6.75 $3.45 $6.00 $5.50 Each Alum. $1.86 $1.14 $0.99 $1.26 $1.08 $2.10
DEL fitting seals are designed to eliminate leakage due to scratches on the sealing surface, improper torquing, or poor finishes on tube ends, in high or low pressure applications. For use with AN, MS, and JIC 37 flared fittings, DEL fitting seals also reduce tube flare cracking by reducing torque needed, eliminating nose damage to the fitting, and allow reuse of hardware. Approved by FAA, NASA, SAE, Air Force, Army, Navy, and major aerospace contractors.
Part Number 04-05002 04-05003 04-05004 04-05006 04-05008 04-05010 04-05012 04-05016
Price Each $1.68 $1.88 $1.73 $1.78 $1.88 $1.83 $1.88 $1.88
96
AN FITTINGS
CM
AN822 (MS20822)
ELBOW, FLARED TUBE AND PIPE THREAD, 90
Size No. Tube Pipe Steel Alum. O.D. Size 2 2D 1/8 1/8 3 3D 3/16 1/8 4 4D 1/4 1/8 4-4 4-4D 1/4 1/4 5-4D 5/16 1/4 5 5D 5/16 1/8 6 6D 3/8 1/4 6-2 6-2D 3/8 1/8 6-6 6-6D 3/8 3/8 8 8D 1/2 3/8 10 10D 5/8 1/2 12 12D 3/4 3/4 Price Steel $18.95 $8.75 $12.25 $9.50 $8.25 $9.75 $15.25 $14.88 $13.50 $18.75 $22.95 Each Alum. $11.50 $5.94 $6.25 $7.50 $13.50 $9.50 $7.50 $6.89 $9.25 $8.50 $10.50 $13.75
AN825 (MS20825)
TEE, FLARED TUBE WITH PIPE THREAD ON SIDE
Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Price Each Tube Pipe O.D. Thread Steel Alum. 1/8 1/8 --$13.00 3/16 1/8 $15.75 $8.50 1/4 1/8 $18.75 $7.75 5/16 1/8 $13.95 $12.75 3/8 1/4 $14.75 $8.25 1/2 3/8 --$9.00 5/8 1/2 --$14.25 3/4 3/4 ----Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4
WP
AN832
UNION, FLARED TUBE, BULKHEAD AND UNIVERSAL
Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 Price Steel $9.96 $11.75 $7.50 $13.50 $7.75 $14.90 $15.95 $23.50 Each Alum. $9.25 $4.60 $3.70 $4.40 $4.35 $5.25 $8.75 $10.75
ME HA AP LG
AN823 (MS20823)
ELBOW, FLARED TUBE AND PIPE THREAD, 45
Size No. Tube Steel Alum. O.D. 2 2D 1/8 3 3D 3/16 4 4D 1/4 5 5D 5/16 6 6D 3/8 8 8D 1/2 10 10D 5/8 12 12D 3/4 Pipe Thread 1/8 1/8 1/8 1/8 1/4 3/8 1/2 3/4 Price Each Steel Alum. $36.45 $9.95 $10.50 $6.50 $9.98 $6.50 $12.70 $7.93 $13.75 $6.50 $17.50 $9.25 - - - $9.97 $35.50 $11.86 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D
AN826 (MS20826)
TEE TUBE WITH PIPE THREAD ON RUN
Price Each Tube Pipe O.D. Thread Steel Alum. 1/8 1/8 $23.50 $13.50 3/16 1/8 $20.70 $9.75 1/4 1/8 $11.50 $7.25 5/16 1/8 $13.80 $10.65 3/8 1/4 $26.75 $8.75 1/2 3/8 $26.75 $6.96 5/8 1/2 $18.50 $15.00 3/4 3/4 - - - $23.25 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12
AN833
ELBOW, FLARED TUBE BULKHEAD AND UNIVERSAL, 90
Price Steel $28.00 $8.25 $9.95 $19.95 $9.87 $16.75 ----Each Alum. $14.38 $7.25 $6.94 $10.25 $8.47 $10.63 $15.50 $15.85
EP CS IN EL AV TO
AN834 AN824
TEE, FLARED TUBE
Size No. Tube Thread Steel Alum. O.D. Size 2 2D 1/8 5/16-24 3 3D 3/16 3/8-24 4 4D 1/4 7/16-20 5 5D 5/16 1/2-20 6 6D 3/8 9/16-18 8 8D 1/2 3/4-16 10 10D 5/8 7/8-14 12 12D 3/4 1-1/16-12 Price Steel $22.80 $11.90 $5.93 $18.50 $19.97 $17.45 $26.50 --Each Alum. $11.93 $6.50 $8.00 $7.95 $7.25 $10.50 $15.25 $23.50 Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D
AN827
CROSS, FLARED TUBE
Price Each Tube Thread O.D. Size Steel Alum. 1/8 5/16-24 - - --3/16 3/8-24 - - - $12.75 1/4 7/16-20 $14.50 $14.50 5/16 1/2-20 - - - $23.45 3/8 9/16-18 - - - $13.75 1/2 3/4-16 - - - $33.85 5/8 7/8-14 ----3/4 1-1/16-12 - - - $38.80 Size No. Tube Thread Size Steel Alum. O.D. 2 2D 1/8 5/16-24 3 3D 3/16 3/8-24 4 4D 1/4 7/16-20 5 5D 5/16 1/2-20 6 6D 3/8 9/16-18 8 8D 1/2 3/4-16 10 10D 5/8 7/8-14 12 12D 3/4 1-1/16-12
PS BV
97
AN FITTINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Pipe Thread Size 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Threads per inch 27 27 18 18 14 14 11.5 11.5 11.5 11.5 Size Brass 4 6 8 --12 Size No. Brass Alum. 4 4D 6 6D Size No. Steel Alum. 2 2D 3 3D 4 4D 5 5D 6 6D 8 8D 10 10D 12 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12
AN837 ELBOW,
FLARED TUBE, BULKHEAD AND UNIVERSAL 45
Price Steel --$7.75 $10.50 $16.75 $11.75 $21.95 $27.50 --Each Alum. $13.87 $8.25 $8.38 $8.90 $8.94 $10.38 $18.25 ---
PIPE THREAD
Size No. Brass Alum. 1 1D 2 2D 3 3D 4 4D 6 6D Thread Size 1/8 1/4 3/8 1/2 3/4 Price Each Brass Alum. $5.95 $2.45 $6.38 $2.75 $6.95 $4.70 $12.50 $8.25 $25.60 $10.93
AN911 NIPPLE
PIPE THREAD
Size No. Brass Alum. 1 1D 2 2D 3 3D 4 4D 6 6D Pipe Thread 1/8 1/4 3/8 1/2 3/4 Price Brass $3.10 $5.50 $4.35 $6.95 $19.93 Each Alum. $2.35 $1.98 $2.90 $6.75 $6.87
AN838 ELBOW,
AN848 ELBOW,
HOSE BULKHEAD, 90
Size No. Hose Thread Price Each Size Brass Alum. Brass Alum. I.D. --4D 1/4 7/16-20 -$21.87 --6D 3/8 9/16-18 -$23.50 --8D 1/2 3/4-16 -$49.75
AN912 BUSHING
PIPE THREAD REDUCER
Size Pipe No. Size Alum. 1D 1/4-1/8 2D 3/8-1/4 3D 3/8-1/8 4D 1/2-3/8 5D 1/2-1/4 6D 1/2-1/8 7D 3/4-1/2 Price Ea. $2.95 $3.30 $3.30 $2.35 $3.60 $3.65 $6.95 Size Pipe Price No Size Ea. Alum 8D 3/4-3/8 $4.10 9D 3/4-1/4 $3.70 10D 1-3/4 $19.75 11D 1-1/2 $11.25 12D 1-3/8 $15.75 13D 11/4-3/4 $12.75
AN FITTING SIZES
AN Size 2 3 4 5 6 8 10 12 16 Metal Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 Thread Size 5/16-24 SAE 3/8-24 SAE 7/16-20 SAE 1/2-20 SAE 9/16-18 SAE 3/4-16 SAE 7/8-14 SAE 1-1/16-12 SAE 1-5/16-12 SAE
DIAGRAMS MAY NOT BE ACCURATE AND SHOULD NOT BE USED FOR EXACT SIZING. FOR REFERENCE ONLY
98
AN FITTINGS
AN914 ELBOW,
INTERNAL AND EXTERNAL PIPE THREAD, 90
Size No. Brass Alum. 1 1D 2 2D 3 3D 4 4D 6 6D Pipe Thread 1/8 1/4 3/8 1/2 3/4 Price Brass $13.00 $7.75 $17.25 ----Each Alum. $7.75 $6.95 $8.50 $13.75 $12.75 Size No. Pipe Brass Alum. Thread 1 1D 1/8 2 2D 1/4 3 3D 3/8 4 4D 1/2 6 6D 3/4
AN917 TEE,
INTERNAL, PIPE THREAD
Price Brass Alum. $14.25 $7.86 $14.50 $9.50 $20.25 $14.75 $31.85 $19.25 --$22.75
AN924 NUT,
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN915 ELBOW,
INTERNAL AND EXTERNAL PIPE THREAD, 45
Size No. Brass Alum. 1 1D 2 2D 3 3D 4 4D 6 6D Pipe Thread 1/8 1/4 3/8 1/2 3/4 Price Brass Alum. $16.50 $10.50 --$9.37 $10.25 $11.75 $29.25 $13.25 --$12.95
AN918
CROSS INTERNAL PIPE THREAD
Size # Pipe Alum. Thread 1D 1/8 2D 1/4 3D 3/8 4D 1/2 6D 3/4 Price Ea Alum. $8.92 $11.50 --$27.45 $18.75 Size No. 2D 3D 4D 5D 6D 8D 10D 12D Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4
AN929 CAP,
PRIMER FITTINGS
Size No. Steel Alum. 0 0D 1 1D 2 2D 3 3D 4 4D 5 5D 6 6D 7 7D 8 8D 9 9D 10 10D 11 11D 12 12D Tube O.D. 3/16-1/8 1/4-1/8 1/4-3/16 5/16-1/4 3/8-1/8 3/8-3/16 3/8-1/4 3/8-5/16 1/2-1/8 1/2-3/16 1/2-1/4 1/2-5/16 1/2-3/8
AN919 REDUCER,
EXTERNAL THREAD
Price Steel Alum. $9.50 $3.65 $11.37 $4.30 $6.50 $2.70 $12.50 $2.85 $14.50 $5.75 --$5.17 $9.25 $3.15 $7.95 $3.40 --$7.50 --$8.97 $6.50 $4.50 $15.75 $6.50 $13.86 $5.75
AN916 ELBOW,
INTERNAL PIPE THREAD, 90
Size No. Pipe Brass Alum. Thread 1 1D 1/8 2 2D 1/4 3 3D 3/8 4 4D 1/2 6 6D 3/4 Price Brass Alum. $7.95 $10.90 $21.25 $9.98 $9.30 $15.97 -$11.50 -$13.75
P=1/8 PIPE THREADS U=5/16-32 UNION THREADS
AN No.
Description
Thread
Price
AN780-2 Union Nipple 1/8x5/16-32 $3.98 AN800-2 Union Cone -$1.21 AN805-2 Union Nut 5/16-32 $1.14 AN4022-1 Discharge Nipple 1/8x5/16-32 $11.75 AN4023-1 Discharge Elbow 1/8x5/16-32 $38.75
Basic part number on all fittings is 04-00XXX, complete the part number by filling in the last 3 digits after selecting the fitting you need according to the details below. Example: 04-00102. First Code Number - Determines the style of the fitting. -1: One port in the end with two ports out, 90 cross drilled with one port per side. 3 ports total. Two Mounting Holes. -2: One port in the end with four ports out, 90 cross drilled with two ports per side. 5 ports total. Two Mounting Holes. -3: One port in the end with six ports out, 90 cross drilled with three ports per side. 7 ports total. Four Mounting Holes. -4: One port in the end with eight ports out, 90 cross drilled with four ports per side. 9 ports total. Four Mounting Holes. -5: One port in the end with four ports out, 90 drilling with four ports on one side only. 5 ports total. Two Mounting Holes. Second Code Number - Determines the style of porting. -0: All the ports are the same. -1: Inlet port is one size larger than outlet ports. -2: Inlet port is two sizes larger than outlet ports. Third Code Number - Determines the inlet port size. -2: 1/8-27 taper pipe thread (NPT) -4: 1/4-18 taper pipe thread (NPT) -6: 3/8-18 taper pipe thread (NPT) -8: 1/2-14 taper pipe thread (NPT) In the example above - 04-00102, this would be a 1/8 NPT inlet with two outlets of the same size. Ex.-04-00326, this would have a 3/8 NPT inlet w/six 1/8 NPT outlets.
Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to provide a convenient means of plumbing multiple hoses from and/or to one source with the fitting being bolted to a supporting structure. This design will eliminate Adel clamps at the juncture of the hoses and eliminate additional tee type fittings when more than two hoses are to be connected to one source. Applications include brake reservoir lines, static system, suction systems, fuel systems, air line pigs, smoke systems, and more. Not for use on oxygen systems or pressures over 150 psi. Part No. Price Part No. Price Part No. Price 04-00214 $14.50 04-00328 $29.85 04-00102 $9.75 04-21600 $19.40 04-00402 $21.80 04-00104 $12.95 04-21800 $24.60 04-00404 $29.20 04-00106 $13.95 04-00226 $16.90 04-00414 $21.70 04-00108 $17.60 04-00228 $17.17 04-00416 $32.50 04-00114 $10.40 04-00302 $17.40 04-00426 $23.33 04-00116 $13.20 04-00304 $23.40 04-00428 $27.99 04-00118 $15.65 04-00306 $29.90 04-00502 $14.90 04-00126 $11.90 04-00308 $28.64 04-00504 $19.65 04-00128 $11.88 04-00314 $18.70 04-00514 $17.30 04-00202 $12.90 04-00316 $25.85 04-00516 $22.90 04-00204 $17.50 04-00318 $25.56 04-00526 $19.85 04-00206 $21.40 04-00326 $19.29 04-00528 $26.90 04-00208 $28.75
99
PHENIX FITTINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Phenix Part No. C0654-4 C0653-4 C0854-4 C0853-4 Phenix Part No. C1451-4 C1651-4 C1652-4 C1851-4 C1852-4 C11051-4 Phenix Part No. C6-4 C8-4 C10-4 C12-4 Phenix Part No. C43-4 C64-4 C86-4 C106-4 C108-4 C1210-4 Phenix Part No. C46-5 C68-5 C810-5 C1012-5 C1216-5 Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. Female / Male -4 / -6 -6 / -8 -8 / 10 -10 / -12 -12 / -16 Part No. 04-02102 04-02101 04-02103 04-02104 04-02105 Price $5.95 $7.75 $15.50 $14.95 $16.50 Phenix Part No. C0671-4 C0871-4 C0872-4
Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. AN -6 -8 -8 NPT 1/4" 3/8" 1/2" Part No. 04-02110 04-02111 04-02112 Price $17.95 $19.95 $22.25
Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. Female / Male -4 / -3 -6 / -3 -8 / -3 -10 / -3 -10 / -3 -12 / -3 Part No. 04-02094 04-02095 04-02096 04-02097 04-02098 04-02099 Price $4.97 $5.25 $6.96 $9.50 $9.50 $12.95
Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. AN -6 -8 -10 -12 Part No. 04-02145 04-02146 04-02147 04-02148 Price $6.50 $7.95 $9.50 $13.50 Phenix Part No. C645-4 C845-4 C1045-4 C1245-4
Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. AN -4 -6 -6 -8 -8 -10 NPT 1/8" 1/4" 3/8" 3/8" 1/2" 1/2" Part No. 04-02139 04-02140 04-02141 04-02142 04-02143 04-02144 Price $8.95 $9.95 $9.95 $11.95 $11.95 $12.95
STRAIGHT
Phenix Part No. J2400-2 J2600-2 J2800-2 J21000-2 J21200-2 Phenix Part No. J2490-2 J2690-2 J2890-2 J21090-2 J21290-2
Price $3.97 $3.97 $4.95 $7.25 $9.25 Price $14.50 $14.50 $17.95 $20.95 $24.50
90 DEGREE
AN -6 -6 -8 -8 NPT 1/4" 3/8" 3/8" 1/2" Part No. 04-02106 04-02107 04-02108 04-02109 Price $15.95 $15.95 $32.25 $20.90 Part No. 04-02130 04-02131 04-02132 04-02133 04-02134
100
CAPLUGS
T SERIES CAPLUGS (NON-THREADED)
Recommended closures for tube and hydraulic fittings.
Tubing O.D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1
Thread 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1 1/16-12 1 5/16-12
Caplugs Caplugs Price As Plugs As Caps Each 1 2 $0.14 2 3 4 5 8 10 12-X 14-X 3-X 4-X 5 6-X 9-X 11-X 13-X 15-X $0.12 $0.22 $0.13 $0.14 $0.23 $0.20 $0.22 $0.37
CM WP ME HA AP LG EP CS IN
Tapered Caplugs can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (or flexible) Polyethylene, they can be applied to fit snugly and are readily removable, whether used for capping or plugging. Especially recommended for use on MIL Std. and SAE-type tube and hydraulic fittings and for threaded external and internal NPT fittings.
Series SC sleeve caps are designed to fit outside diameters of tubing sizes listed with a snug friction grip. Available in 57 different O.D.s and lengths. Ideal for capping and protecting both threaded and nonthreaded tubing or rod ends. The also make excellent masks, for painting, plating or grit-blasting operations. Less 20% Discount on 50 Caplugs (Same P/N)
EL AV TO
Knurled for ease of application, Series CD caps seal flared JIC fittings exceptionally well against dirt and moisture, as well as for masking during dipping, painting and plating.
PS BV
Series PD Plugs, designed for use on flared JIC fittings, air knurled for ease of application. They will seal low pressure requirements with light finger tightening. PD plugs can be used to seal 37 flare fittings without gaskets.
.46 11.68 .50 12.70 .18 .53 13.46 .62 15.75 .19 .53 13.46 .68 17.27 .25 .50 12.70 .81 20.57 .25 .59 14.99 .81 20.57 .25 .75 19.05 .94 23.88 .25 .87 22.10 1.06 26.93 .25 1.12 28.45 1.31 33.28 .25 .93 23.62 1.50 38.10 .25 50 Caplugs (Same P/N)
101
CAPLUGS
RCL SERIES CAPLUGS (UNTHREADED)
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Series PDF plugs are designed for easy mechanical or hand installation on flat-faced O-ring fittings. Static dissipative EC Series Caplugs provide positive ESD and physical protection for all common sizes of threaded electrical and electronic connectors. Also suitable for protecting non-threaded bayonet-type connectors. Less 20% Discount on 50 Caplugs (Same P/N) Series RCL caps are ideal for protecting threaded or smooth cylindrical surfaces. Originally designed for use on hydraulic double threaded bulkhead fittings, they are especially suitable where greater longitudinal protection is required. Less 20% Discount on 50 Caplugs (Same P/N)
Part No. 04-00079 04-00080 04-00009 04-00011 04-00012 04-00013 04-00014 04-00015 04-00016
Caplug No. (formerly) (series B-203) RCL-2 RCL-3 RCL-4 RCL-5 RCL-6 RCL-8 RCL-9 RCL-10 RCL-12
A To Cap Thread Size In. 5/16 3/8 7/16 1/2 9/16 3/4 7/8 11/16
B Inside Length In 1.24 1.24 1.33 1.33 1.41 1.56 1.70 1.89 mm 31.50 31.50 33.78 33.78 35.82 39.63 39.63 43.18 48.01 in .46 .52 .58 .64 .70 .88 .91 1.01 1.19
C Price Each mm 11.68 $0.15 13.21 $0.29 14.73 $0.16 16.26 $0.18 17.78 $0.31 22.35 $0.26 23.11 $0.37 25.66 $0.23 30.23 $0.30
1/8 NPT .44 11.18 .28 1/4 NPT .50 12.70 .37
3/8 NPT .56 14.22 .44 11.18 1/2 NPT .59 14.99 .56 14.22
Part No.
04-00018 PDF-60 04-00019 PDF-80 04-00020 PDF-100 04-00021 PDF-120 04-00022 PDF-160
14.99 1.16 29.47 $0.27 16.00 1.33 33.78 $0.39 19.05 1.63 41.40 $1.63
102
NYLO-SEAL FITTINGS
CM
Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are furnished complete with nut/sleeve assemblies, made of acetal copolymer. Since the sleeve snaps into and is retained by the nut there is no fumbling for a loose sleeve. Just insert tube into the fitting and tighten the nut 2 to 2-1/2 full turns. Note: The most frequently used combination of tube and pipe sizes are 1/4 Tube x 1/8 Pipe and 3/8 Tube x1/4 Pipe.
WP ME
259-P CAP, 261-N NUT AND 259-N INSERT (NYLON) SLEEVE ASSEMBLY
Tube O.D. 259-N 1/4 A 3/8 D 1/8 Tube O.D.
1/4 3/8
Thd.
HA AP
262-N UNION
Tube O.D. 1/4 3/8 A B C 5/8 D 7/32 E 15/32
1-25/64 63/64
LG EP CS IN EL AV TO
1-9/64 47/64
*Use 259-N inserts with all Poly-Flo tubing connections. Not needed with Nylo-Seal tubing. Part No. 259-N 04 259-N 06 259-P 04 259-P 06 261-N 04 261-N 06 262-N 04 262-N 06 264-N 04 264-N 06 265-N 04 265-N 06 Tube Size In. 1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 Price Each $0.81 $0.91 $0.68 $1.06 $0.79 $1.15 $2.46 $3.20 $3.95 $5.85 $2.70 $4.75 Less 10% Size (In) Price Part No. Tube Pipe Each 266-N 04 x 02 1/4 x 1/8 $6.50 266-N 04 x 04 1/4 x 1/4 $5.50 266-N 06 x 04 3/8 x 1/4 $6.75 266-N 06 x 06 3/8 x 3/8 $6.50 268-N 04 x 02 1/4 x 1/8 $2.30 268-N 04 x 04 1/4 x 1/4 $2.15 268-N 06 x 04 3/8 x 1/4 $2.50 268-N 06 x 06 3/8 x 3/8 $2.40 269-N 04 x 02 1/4 x 1/8 $2.25 269-N 04 x 04 1/4 x 1/4 $2.35 269-N 06 x 04 3/8 x 1/4 $3.20 269-N 06 x 06 3/8 x 3/8 $3.20 on 50 pieces per size, Less 20% on 100 pieces per Part No. 271-N 04 x 02 271-N 04 x 04 271-N 06 x 04 271-N 06 x 06 272-N 04 x 02 272-N 04 x 04 272-N 06 x 04 272-N 06 x 06 282-N 04 282-N 06 ------size Size (In) Tube Pipe 1/4 x 1/8 1/4 x 1/4 3/8 x 1/4 3/8 x 3/8 1/4 x 1/8 1/4 x 1/4 3/8 x 1/4 3/8 x 3/8 1/4 3/8 ------Price Each $3.15 $4.15 $8.75 $5.75 $3.20 $4.10 $5.50 $5.85 $6.50 $6.98 -------
PS BV
103
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Adapter Elbow Tube to Pipe Tube to Pipe Tee, Tube to Pipe (Pipe on Side) Tee, Tube on Three Sides Connector Tube to Tube
Poly-Flo Flareless tube fittings consist of a brass body, nut and sleeves. Use with PolyFlo, PVC or Nylaflow pressure tubing. The Poly-Flo fittings have the same configuration as Nylo-Seal fittings of the same basic part number.
261UB - NUT WITH SLEEVE Tube Thread Part Price O.D. Size Number Each 1/8 5/16-24 261UB-02 $0.99 3/16 3/8-24 261UB-03 $0.85 1/4 3/8-24 261UB-04 $0.95 262P Tube Thread O.D. Size 1/8 -3/16 -1/4 -- UNION Part Number 262P -02 262P-03 262P-04 Price Each $5.40 $4.50 $3.95 268P - MALE CONNECTOR Tube Pipe Part Price O.D. Thread Number Each 1/8 1/8 268P-02x02 $1.98 3/16 1/8 268P-03x02 $3.95 1/4 1/8 268P-04x02 $1.96 269P - MALE ELBOW Tube Pipe Part Price O.D. Thread Number Each 3/16 1/8 269P-03x02 $4.90 1/4 1/8 269P-04x02 $2.50 270P - FEMALE ELBOW Tube Pipe Part Price O.D. Thread Number Each 3/16 1/8 270P-03x02 $4.80 272P - MALE BRANCH TEE Tube Pipe Part Price O.D. Thread Number Each 3/16 1/8 272P-03x02 $6.50
Hose and tubing Insert Fittings are available in high density polyethylene or Nylon. Use polyethylene fittings with Tygon, nylon or soft rubber tubing to assemble low pressure instrument lines such as airspeed pitot and static lines. Use Nylon fittings in gravity-feed fuel lines and engine breather lines. Polyethylene Part Price No. Each 3/16Tx1/8P 0700-150 $0.46 1/4Tx1/8P 0700-153 $0.73 5/16Tx1/8P 0700-156 $0.68 ADAPTER Tube to pipe 3/8Tx1/8P 0700-158 $0.68 1/4Tx1/4P 0700-110 $0.76 3/8Tx1/4P 0700-162 $0.72 1/4Tx1/8P 0710-153 $0.98 ELBOW 3/8Tx1/8P 0710-158 $0.97 Tube 1/4Tx1/4P 0710-110 $1.15 to Pipe 3/8Tx1/4P 0710-162 $0.82 1/4Tx1/4T 0710-015 $0.75 Tube to Tube 3/8Tx3/8T 0710-020 $1.04 1/4Px1/8P 0725-153 $0.72 REDUCING 3/8Px1/8P 0725-161 $0.76 CONNECTOR 3/8Px1/4P 0725-162 $0.75 1/4Tx1/4Tx1/8P 0715-153 $1.04 TEE 3/8Tx3/8Tx1/4P 0715-162 $1.04 Tube to pipe 1/4Tx1/4Tx1/4P 0715-110 $0.99 3/16Tx3/16Tx3/16T 0715-011 $0.77 TEE 1/4Tx1/4Tx1/4T 0715-015 $1.04 All Tube 3/8Tx3/8Tx3/8T 0715-020 $1.04 1/4Tx1/4T 0705-015 $0.61 CONNECTOR Tube to Tube 3/8Tx3/8T 0705-020 $0.68 Fitting Type Size Fitting Type TEE Tube to pipe HDPE Natural Nylon Part Price No. Each 0701-150 $0.61 0701-153 $0.59 0701T-15 $0.92 0701-158 $0.75 0701-110 $0.78 0701-162 $0.64 0711-153 $1.05 0711-158 $1.07 0711-110 $1.09 0711-162 $1.07 0711-015 $0.98 0711-020 $0.93 0726-153 $0.86 0726-161 $0.79 0726-162 $0.98 0716-153 $1.14 0716-162 $0.92 0716-110 $1.07 0716-011 $0.83 0716-015 $1.07 0716-020 $1.07 0706-015 $0.72 0706-020 $0.72
264P - UNION TEE Tube Thread Part Price O.D. Size Number Each 3/16 -264P-03 $7.93 1/4 -264P-04 $5.60 266P - FEMALE CONNECTOR Tube Pipe Part Price O.D. Thread Number Each 1/8 1/8 266P-02x02 $3.65 3/16 1/8 266P-03x02 $3.60
These brass elbows and tees provide flexibility in the routing of lines which terminate in male pipe threads.
45 Street Elbow
Street Elbow
Street Tee
45 STREET ELBOW
Pipe Thread 1/8 1/4 3/8 Pipe Thread 1/8 1/4 3/8 Pipe Thread 1/8 1/4 3/8 Pipe Thread 1/8 1/4 3/8
Tube Insert
Part Number 3350x2 3350x4 3350x6 Part Number 3400x2 3400x4 3400x6 Part Number 3600x2 3600x4 3600x6 Part Number 3750x2 3750x4 3750x6
Price Each $2.55 $3.15 $2.80 Price Each $1.95 $2.15 $3.30 Price Each $4.75 $4.30 $10.00 Price Each $3.92 $7.25 $7.75 Price Each $0.99 $0.90 $0.51 $0.83 $1.77
90 STREET ELBOW
For pressure switches with 1/8 male pipe threads. For 1/4 O.D oil pressure lines.P/N 10-04846 ............... $9.85
TEE CONNECTOR
STREET TEE
REMOVAL TOOL
It is easy to install and remove using a choice of manual. P/N 05-02710 ............. $13.75
104
CLAMPS
Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge type. Cushion assures tight fit and eliminates vibration, thus preventing line abrasion.
Tube Dia. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 Dash No. DG2 DG3 DG4 DG5 DG6 DG7 DG8 DG9 DG10 DG11 DG12 DG13 DG14 DG15 DG16 DG17 DG18 DG19 DG20 Price Each $0.47 $0.32 $0.23 $0.41 $0.26 $0.55 $0.30 $0.33 $0.30 $0.66 $0.38 $0.69 $0.64 $0.68 $0.49 $1.15 $0.99 $1.30 $1.11 Dash No. WDG2 WDG3 WDG4 WDG5 WDG6 WDG7 WDG8 WDG9 WDG10 WDG11 WDG12 WDG13 WDG14 WDG15 WDG16 WDG17 WDG18 WDG19 WDG20 Price Each $0.44 $0.35 $0.36 $0.37 $0.39 $0.43 $0.37 $0.49 $0.43 $0.70 $0.60 $0.74 $0.66 $0.76 $0.66 $1.29 $0.88 $1.09 $0.87 Tube Dia. 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 1-15/16 2 2-1/16 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 Dash No. DG21 DG22 DG23 DG24 DG25 DG26 DG28 DG30 DG31 DG32 DG33 DG34 DG36 DG38 DG40 DG42 DG44 DG46 DG48 DG50 Price Each $1.17 $1.39 $1.77 $1.06 $2.23 $1.46 $1.47 $1.63 $2.40 $1.06 $1.63 $1.59 $1.65 $1.63 $1.47 $1.77 $1.89 $2.40 $1.76 $2.95 Dash No. WDG21 WDG22 WDG23 WDG24 WDG25 WDG26 WDG28 Price Each $1.35 $1.20 $1.37 $1.21 $1.38 $1.18 $1.33
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SNAPPER CLAMPS
Plain loop-type line support clamps, made of aluminum alloy meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensile strength of 50,000 PSI. Dash No. -D3 -D4 -D5 -D6 -D7 For Tube O. D. (In.) 3/16 1/4 5/16 3/8 7/16 Less 15% in Price Dash For Tube Each No. O. D. (In.) $0.22 -D8 1/2 $0.20 -D10 5/8 $0.45 -D12 3/4 $0.33 -D15 15/16 $0.62 -D16 1 lots of 50. May be assorted. Price Each $0.37 $0.47 $0.40 $0.67 $0.64
Less 15% in lots of 50. May be assorted. Tangential worm-screw type for use on fuel, oil, air and coolant lines. Worm drive provides uniform clamping pressure without distorting hose. The QS100 series has stainless steel band with cadmium-plated carbon steel thumb screw. To attach, just push housing to the desired position on the band, snugly around hose, & the threads of the worm screw will drop into the slots. Tighten thumb screw with finger pressure - no tools required.
QS100 Dash No. M6W M8W M10W M12W M16W Dia. Range (In.) Min. Max. 7/16 25/32 1/2 29/32 9/16 1-1/16 11/16 1-1/4 13/16 1-1/2 Price Each $1.71 $1.83 $1.84 $1.84 $1.88 QS100 Dash No. M24W M28W M32W M36W M40W Dia. Range (In) Min. Max. 1-1/16 2 1-1/16 2-1/4 1-9/16 2-1/2 1-13/16 2-3/4 2-1/16 3 Price Each $1.86 $1.72 $1.95 $1.84 $2.25
The best clamp for small diameter hose and tubing. Stainless steel band and housing with plated carbon steel screw. Applies an even circumferential pressure with less torque. 7/32 to 5/8 ..............P/N 6504 ............. $0.94 Ea. 7/16 to 7/8 ..............P/N 6506 ............. $0.92 Ea. Oetiker Stepless Screw Clamps feature a unique tongue-in-groove design to provide a perfect 360 seal. Their narrow band width of 9 mm is designed to fit grooved objects. They are ideal where specialty clamping needs have to be met and the application calls for a smooth inner surface such as on flexible duct sleeves. The tongue-in-groove design provides that stepless complete seal. Manufactured using 300 AISI series stainless steel. Clamping O.D. Price Clamping O.D. Price P/N P/N Range Inches Each Range Inches Each 028-9 13/16 - 1-1/8 $3.91 090-9 3-5/16 - 3-1/2 $4.10 031-9 15/16 - 1-1/4 $4.20 095-9 3-1/2 - 3-3/4 $4.85 032-9 1-1/16 - 1-1/4 $4.45 100-9 3-11/16 - 3-15/16 $3.95 036-9 1-1/4 - 1-7/16 $4.30 105-9 3-15/16 - 4-1/8 $4.30 040-9 1-3/8 - 1-9/16 $3.93 110-9 4-1/8 - 4-5/16 $3.97 045-9 1-9/16 - 1-3/4 $3.99 115-9 4-5/16 - 4-1/2 $5.50 050-9 1-3/4 - 2 $3.95 120-9 4-1/2 - 4-11/16 $3.60 055-9 1-15/16 - 2-1/8 $3.97 125-9 4-11/16 - 4-15/16 $3.65 060-9 2-1/8 - 2-3/8 $4.63 130-9 4-7/8 - 5-1/8 $3.65 065-9 2-5/16 - 2-9/16 $4.20 135-9 5-1/16 - 5-5/16 $4.55 070-9 2-9/16 - 2-3/4 $4.15 140-9 5-1/2 - 5-11/16 $5.75 075-9 2-3/4 - 3 $5.25 145-9 5-11/16 - 5-7/8 $3.80 080-9 2-15/16 - 3-1/8 $5.75 150-9 5-7/8 - 6-1/16 $3.45 085-9 3-1/8 - 3-5/16 $4.50 160-9 6-1/16 - 6-1/4 $3.95 165-9 6-1/4 - 6-1/2 $4.83 These line clamps are lightweight but tough enough for the most rugged applications. Feature single piece .030 thick aluminum construction. No more messy bundles. Each clamp is shaped to hold braided line, tubing, or wiring securely, without pinching. Secured w/ standard tie wraps, these claps keep movement and wear to a minimum. Can be adjusted to mount on any tubing from 3/4. Size P/N Price Size P/N Price 1/4 05-00004 $0.60 5/8 05-00007 $0.76 3/8 05-00005 $0.70 3/4 05-00008 $0.80 1/2 05-00006 $0.75 1 05-00009 $0.90 30 piece assortment includes 5 of each clamp P/N 05-02205................$22.55
LINE CLAMPS
Robust, durable one-piece design offers positive, tamper resistant seal For air and fluid media lines One-piece design offers quick and easy installation Smooth edges prevent damage to hose. 1/4....................... P/N 15-04628 .........$0.42 5/16..................... P/N 15-04870 .........$0.49 3/8....................... P/N 15-04816 .........$0.43
105
Poly-Flo tubing is a flexible, economical thermoplastic tubing fabricated from high molecular weight polyethylene for improved strength. The base resin has the greatest resistance to environmental stress cracking of all the regular polyethylenes. It meets A.S.T.M. D-1248-60T, Type 1, Class A, Grade 4 and Federal Specification LP-590, Type 2, Grade 7. Used for instrument or pneumatic lines. Use Nylo-Seal fittings (259-N inserts are required), nylon or polyethylene hose fittings such as 0710-153. Color - natural. Part No. 44-P 66-P 88-P Tube OD 1/4 3/8 1/2 Wall 0.040 0.062 0.062 Bend Radius 1.250 2.00 2.500 PSI at 75 F 190 205 150 PSI at 150 F 75 80 60 Price $0.39 $0.32 $0.78
NNR TUBING
Part No. 05-01009 05-01010 05-01011 05-01012 Part No. 05-01228 05-01229 05-01231 O.D. (In.) 1/8 3/16 1/4 3/8 O.D. (In.) 1/8 1/4 3/8 Wall (In.) .026 .039 .035 .075 Wall (In.) .026 .050 .075 Burst Min. Pressure Bend (PSI) Radius 1500 3/8 1500 5/8 1500 7/8 1500 1-1/2 Wt. (Lb/Ft) .004 .008 .015 .032 Price per Ft. $0.32 $0.28 $0.71 $0.66
PRESSURE RATINGS
Poly-Flo Nylo-Seal NSR** (Polyethylene) (Nylon 11) Burst Max. Work Burst Max. Work Pressure* Pressure* Pressure* Pressure* PSI PSI PSI PSI Room Temp. 250-600 75-160 2500 625 140F. 125-300 37-80 1800 425 230F. UNUSABLE 1400 350 280F. UNUSABLE UNUSABLE *Depends on tube size and wall thickness. Working pressure based on a safety factor of 4. **Satisfactory for continuous operation up to 180 F. Becomes embrittled above this point. Operating Temperature
NBR TUBING
Burst Pressure (PSI) 2500 2500 2500 Min. Bend Radius 3/8 7/8 1-1/2 Wt. Price (Lb/Ft) per Ft. .004 .015 .032 $0.35 $0.72 $1.83
Nylon Polypenco. pressure tubing is a super tough, low friction, high flexibility tubing that can be used for cable protectors or in short pieces, as small bushings and washers. Suitable for use in oil, air, vacuum, fuel and low pressure hydraulic lines. It resists abrasion and wears better than aluminum or steel tubing. Has an extremely smooth inner surface with a very low coefficient of friction. Used for brake lines, and also as a conduit for the rudder cables in the Rutan VariEze and Long-EZ. Rated 1000 psi. Use Poly-Flo fittings. Sold by the foot. Type OD ID PSI Part No. Price Standard Wall 1/8 .096 1000 05-00105 $0.15 Standard Wall 3/16 .138 1000 05-00110 $0.26 Standard Wall 1/4 .190 1000 05-00115 $0.34 High Bursting Pressure 1/4 .150 2500 05-04349 $0.60 High Bursting Pressure 3/16 .111 (appx.) 2500 05-04355 $0.26 Neoprene tubing is used in instrument hookups and for battery drains. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Not for use as fuel or oil lines. I.D. Wall Part No. Price/Ft 3/16 1/16 05-00200 $1.12 1/4 1/16 05-00300 $0.69 3/8 1/16 05-00400 $0.82 Tygon tubing is flexible, tough, abrasion-resistant and non-aging. Ideal or hookup of airspeed pitot and static lines (not recommended for pressurized applications). Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. 3/8 O.D. X 1/4 I.D. ...................P/N 05-00944 ........$1.46 Ft 1/2 O.D. X 3/8 I.D. ...................P/N 05-00945 ........$2.75 Ft This fuel line is blue in color and does not rot or deteriorate from the inside, clogging the carburetor or fuel system. It withstands 50 PSI and tensile strength is 8000 PSI. It is resistant to temperatures of -65 to 220F without deterioration, features exceptional resistance to gasoline, oil, oxygen, and ozone, and has high elastic memory allowing use of Delrin or nylon barbed fittings in low pressure applications without the need for external clamps. Description ID OD Part No. Price Bing Alcohol Resistant Fuel Line 1/4 3/8 05-00500 $1.48 Bing Alcohol Resistant Fuel Line 1/8 1/4 05-00560 $1.13 Nylon tubing is a popular choice for low pressure pneumatic applications because of its combination of flexibility and toughness. Nylon retains its performance integrity in elevated temperatures and generally, because of its higher pressure and temperature characteristics, Nylon will have a greater flow passage than composite tubing made from other material with the same outside diameter. Part No. OD ID Price 0500-165 7/8 5/8 $1.64 0500-180 1 3/4 $2.30
Super heavy wall clear polyurethane pulse line has an extra thick 3/32 wall that will not dampen crankcase pulse even on longer runs. Clear one piece urethane construction is not affected by fuel. Will not harden, crack, or become brittle with age. Can also be used as clear fuel line. Sold by the foot. Outside Diameter: 7/16". Inside Diameter: 1/4". Wall Thickness: 3/32" P/N 15-06094 ....... $0.99 Polyether-based Polyurethane Tubing offers excellent resistance to chemicals, kinking, abrasion, hydrolysis, oxidation, and ozone exposure. Generally stronger than Ether-based tubing, Ester-based Polyurethane Tubing features above average chemical resistance, a high level of resilience, and adequate energy absorption. Although Polyester-based Tubing is not recommended for applications that expose the tubing to water or moisture, it does enjoy a slight cost advantage over Ether-based tubing. O.D. Description Part Number Price 1/4 Clear Blue Polyurethane Fuel Line 15-04632 $0.89 5/16 Clear Blue Polyurethane Fuel Line 15-04874 $0.59 3/8 Clear Blue Polyurethane Fuel Line 15-04818 $0.89 Flexible polyurethane tubing has greater abrasion and tear resistance than any other type of plastic tubing. Wont age or oxidize. Excellent low temperature flexibility - avoids brittleness. Tensile strength 5900 PSI. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Sold by the foot. Mfg PN 0585-071 0585-107 0585-165 0585-180 OD 3/8 1/2 7/8 3/4 ID 1/4 3/8 5/8 1 Our PN 0585-071 0585-107 0585-165 05-04246 Price $1.53 $2.10 $5.93 $7.68
NEOPRENE HOSE
POLYURETHANE TUBING
TYGON TUBING
NYLON TUBING
Parkers fuel line hose includes a new thermoplastic barrier that helps protect our atmosphere from harmful hydrocarbons that escape through the carcass of ordinary fuel hose. This new hose surpasses all of CARBs stringent permeation requirements and is similar to SAE30R7 specifications. The Super-Flex FL hose also features an abrasion and weather resistant cover to help protect from external application abuse. Approved for biodiesel fuels that meet ASTM D 6751 requirements per UL guidelines for Biodiesel compatibility.4:1 Design factor Tube: Cover: Reinforcement: Temperature Range: Part No. ID (in.) 05-03597 1/4 05-03598 3/8 NBR with a thermoplastic barrier Black Hypalon Braided Polyester -30F to +257F (-34C to +125C)
Approx. Min. Max Price Reinf. OD(in.) OD(mm) wt. per Bend Rec. Per Braids 100 ft. Rad. WP Ft. 1 0.500 12.7 9.7 100 $4.75 1 0.625 15.9 1.30 100 $4.75
Prices Subject to Change Without Notice
106
This standard hose is used in med-pressure a/c hydraulic fuel, oil and coolant systems. An inner tube of seamless synthetic rubber is reinforced with a synthetic-impregnated single-wire braid over a single cotton braid and an outer cover of synthetic-impregnated oil-resistant cotton braid. Operating temperature -65 to 250F. Conforms to MILH8794 (supersedes MIL-H-5511A). Used with Aeroquip 491 hose fittings.
Max. Oper. For Hose I.D. Pressure** (PSI) Tubing Size 303-3 3/16 1/8 3,000 303-4 1/4 3/16 3,000 303-5 5/16 1/4 3,000 303-6 3/8 5/16 2,000 303-8 1/2 13/32 2,000 303-10 5/8 1/2 1,750 303-12 3/4 5/8 1,500 * Corresponds to dash no. of Aeroquip 491 hose fittings. ** Safety factor of 4. Hose P/N* Wt. per Ft. (Lb.) .120 .132 .156 .228 .264 .372 .456 Price Per Ft. $6.25 $6.90 $7.75 $7.95 $8.50 $9.68 $11.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
P/N 491-3
Aeroquip 491 hose fittings consist of an AN818 style nut, an externally threaded 37 nipple and an internally threaded hose socket. Fittings of sizes 3 through 6 have nuts and nipples of cadmium plated steel. Nuts and nipples for size 8 and larger are of anodized aluminum. Fittings conform to MS24587.
Part No. Tube Size (In.)* AN818 Nut Thread Size** 491-3 3/16 3/8-24 491-4 1/4 7/16-20 491-5 5/16 1/2-20 491-6 3/8 9/16-18 491-8D 1/2 3/4-16 491-10D 5/8 1-1/16-12 491-12D 3/4 1-1/16-12 * Corresponds to dash no. of Aeroquip 816 hose fittings. ** Safety factor of 4. Price Each $11.50 $9.45 $11.75 $12.25 $13.35 $21.75 $28.75
A low-pressure hose for instrument air & vacuum lines. Consists of an inner tube of seamless synthetic rubber, reinforced with a single layer of cotton braid and a synthetic rubber cover. Used with slip-over hose fittings such as the AN840 series, or with Aeroquip 471 hose fittings when connecting to AN type fittings. Conforms to Specification MIL-H-5593. Specify hose I.D. when ordering. Part No. 306-2 306-4 306-6 306-8 306-10 Hose Dimensions Burst Wt./ I.D. (In.) O.D. (In.) Pressure (PSI) Ft. (Lb.) 1/8 11/32 1,000 .056 1/4 15/32 1,000 .072 3/8 19/32 1,000 .096 1/2 3/4 750 .144 5/8 7/8 700 .168 Price Per Ft. $6.50 $3.40 $3.65 $6.25 $7.25
These hose and fitting assembly mandrels are designed for all straight fittings in Aeroquip 303 and Stratoflex 111 series. These hose types are common to most hydraulic, pneumatic, coolant, fuel and oil systems specified in MS33620 for aircraft applications. These quality tools are made from premium tool steel and bright nickel plated for long life. Available individually in sizes -3 thru -12 or in an assortment kit including all 7 sizes.
05-01885 05-01886 05-01887 05-01888 05-04241 05-04242 05-04243 05-04544 MILSPEC MANDRELS Hose Fitting 3/16 MS-3M 1/4 MS-4M 5/16 MS-5M 3/8 MS-6M 1/2 MS-8M 5/8 MS-10M 3/4 MS-12M Includes 1 each of the MilSpec Mandrels Price $18.50 $14.75 $14.70 $19.90 $21.75 $30.85 $38.50 $158.95
471-2D Part No. 471-2D 471-4D 471-6D 471-8D Tube Size 1/8 1/4 3/8 1/2
Aeroquip 666 medium pressure Teflon hose is widely used in aircraft applications handling fuel, oils, and other fluids. It is unaffected by all fuels, oils, alcohols, coolants, or solvents commonly use in aircraft. Construction of Aeroquip 666 hose is of spiral extruded Teflon resin for the inner tube with a reinforcement and outer cover of Type 300 Series stainless steel wire braid. The result is a lightweight hose able to withstand prolonged flexing and vibration under all service conditions. Aeroquip 666 hose is also use in hydraulic and pneumatic applications at pressures up to 1500 psi.
Hose Part No. 666-4 666-5 666-6 666-8 666-10 666-12 Hose I.D. (inches) .188 .250 .313 .406 .500 .625 Hose O.D. (inches) .312 .375 .466 .562 .656 .789 Max. Oper. Pressure 1500 1500 1500 1500 1500 1000 Wt. Per Ft. (lbs.) .08 .09 .11 .14 .19 .24 Price Per Ft. $7.90 $8.90 $11.75 $15.50 $18.60 $23.25
*Corresponds to tube O.D. of AN-type flared tube fittings. Not an Aeroquip dimension.
For use with Aeroquip 491 fittings. These tools are recommended to avoid damage to the sealing surface and to properly support the inner tube. Note: These are Aeroquip Factory Mandrels, which are highly recommended for best results. #491 #491 Hose Mandrel Hose Mandrel Fitting Price Fitting Price Size P/N Size P/N P/N P/N 3/16 491-3 S-1051-3* $89.90 1/2 491-8 S-1051-8 $73.75 1/4 491-4 S-1051-4* $74.75 5/8 491-10 S-1051-10 $87.75 5/16 491-5 S-1051-5* $109.50 3/4 491-12 S-1051-12 $150.95 3/8 491-6 S-1051-6* $71.65 *With Removable mandrel. Aeroquip Qty. Discount: 15% for 20 ft.; 20% for 50 ft.; 25% for 100 ft. or more (Per Item)
107
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aeroquip 816 straight hose fittings and 8891 90 hose fittings consist of a preassembled nut/nipple assembly and an internally threaded hose socket. The size 4 816-4 fitting has a cadmium plated steel nut and nipple. Sizes 6, 8 and 10 nuts and nipples, and all sizes of sockets, are anodized aluminum. Note: Aeroquip 816 fittings are not the same as AN816 fittings. Include the word Aeroquip with Part number when ordering.
Aeroquip 816 Price Part No. Each 816-4 $24.85 816-6D $27.50 816-8D $26.90 816-10D $36.85 Size* 1/4 3/8 1/2 5/8 Nut Thread Size** 7/16-20 9/16-18 3/4-16 7/8-14 Aeroquip 8891 Price Part No. Each 8891-4 $48.75 8891-6D $63.50 8891-8D $69.85 8891-10D $78.25
An inner tube of seamless, specially formulated synthetic rubber reinforced with a stainless steel partial inner braid and full-coverage stainless steel outer braid. Operating temperature -40 to 300F. Aeroquip 601 hose is widely used for aircraft fuel and oil lines where flexibility and light weight are prime considerations. Because of its lighter weight and lower operating pressure than type 303 hose, it is not recommended for hydraulic lines. Use with Aeroquip 816 hose fittings. Aeroquip 601/AE701 is a direct replacement for old 601 hose. AE701 hose has no shelf life and is the upgraded version of 601 hose. Hose Part For Tubing Hose I.D. Max. Oper. Wt. per Part No.* Size Pressure** (PSI) Ft. (Lb.) 601-4 1/4 7/32 1,000 .120 601-6 3/8 11/32 1,000 .156 601-8 1/2 7/16 1,000 .168 601-10 5/8 11/16 1,000 .204 Price Per Ft. $13.75 $13.25 $15.90 $19.75
*Corresponds to tube O.D. of AN-type flared tube fittings. Not an Aeroquip dimension. ** Same thread size as AN818 nut of same dash no. Less 10%, 6 - 11 Aeroquip fittings; Less 15%, 12 - 24 Aeroquip fittings; Less 20%, 25 or more Aeroquip Fittings May be assorted sizes and types.
Quantity Discounts Same As Aeroquip Hose Firesleeve Clamp Installation Tool - Band Width: 1/4 in - 3/8 in P/N 05-00447 ........................................ $123.95 Economy Firesleeve Clamp Tool - for 3/8 or 1/4 roll band. P/N 12-00684 .......................................... $23.85
Aeroquip Firesleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75. May be used for all fuel, oil, hydraulic, fire extinguisher & propeller feathering lines. Fire-proof hose lines as defined by FAA must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fireresistant lines must withstand a 5-minute exposure under these conditions. Fire-proof hose lines are obtained when the proper size Aeroquip Firesleeve is selected from the chart below and properly assembled. 900591B Clamps - used to secure firesleeve material on each end over the basic hose assembly. See chart for correct size. 900591B-1C ........................... P/N 05-02653 ................................. $2.10 900591B-2C ........................... P/N 05-02652 ................................. $2.55 900591B-3C ........................... P/N 05-02654 ................................. $2.65 Use Use With 900591B Price With 900591B Price Part No. Hose # Clamp Part No. Hose # Clamp Per Ft. Per Ft. 303 601 Dash # 303 601 Dash # AE102-8 -3 -4 -1C $8.75 AE102-16 -10 -10 -3C $14.90 AE102-9 -4 -5 -2C $9.25 AE102-18 -12 -3C $17.50 AE102-10 -5 -2C $9.25 AE102-20 - -12 -3C $16.25 AE102-12 -6 -6 -2C $10.90 AE102-22 -16 -16 -3C $21.65 AE102-14 -8 -8 -2C $13.85 AE102-24 - - $13.85 $26.75
Aeroquip Teflon hose is constructed with a conductive, seamless smooth bore inner tube covered with a stainless steel braid. Unattracted by fuel, oil, coolants and solvents used in aircraft systems. Service and shelf life of Aeroquip Teflon hose is unlimited for all practical purposes. They can be used in fuel, hydraulic and pneumatic applications at working pressures to 1500psi. Minimum burst pressures are 8000 psi sizes -3 to -8. Temperature range is -65 to +450 F. Hose assemblies prices are straight to straight. Call for 45 and 90 elbow pricing.Measurements are taken as follows:
Fittings Straight to Straight Straight to 45 Straight to 90 45 to 45 45 to 90 90 to 90 Measurement End to end (overall length) End of straight fitting to top of b-nut on 45 fitting End of straight fitting to center of 90 fitting Top of b-nut on 45 fitting to Top of b-nut on 45 fitting Top of b-nut on 45 fitting to center of 90 fitting Center of 90 fitting to Center of 90 fitting
Size -3 -4 -5 -6
Integral silicone firesleeves on Teflon 666 hose assemblies. This hose/sleeve combination meets the test requirements of TSO-C53A Type D and TSO-C75 Type IIIA and IIIB. The Silicone sleeve is applied directly onto the metal braid an fittings to form a smooth, tight bond. Hose flexibility is not impaired. Non-age sensitive for extra-long service life. Eliminates the use of band clamps. Temperature range -65F to +450F. Specify hose size and length of assembly in inches and eighths of an inch from sealing surface to sealing surface. Available in blue, brown, orange, or purple. Purple is lightweight. Call 877-4-SPRUCE (777823), or email info@aircraftspruce.com for pricing and availability. Size Aeroquip P/N Size Aeroquip P/N -8 AE3663161HXXXX -3 AE3663161BXXXX -10 AE3663161JXXXX -4 AE3663161EXXXX -12 AE3663161KXXXX -5 AE3663161FXXXX -6 AE3663161GXXXX
AEROQUIP AE466
Features: * No Wrenches Required * NHRA Approved * Retrofittable with existing hoses & hose ends * Eliminates the need for a wrench to seal the connection, Just hand tight * Eliminates crossthreading with the built in B-Nut guide * Prevents cavitation * Stays as a unit, no assembly required * Protects threads from F.O.D. (Foreign Object Damage) * Eliminates the need for safety wire * Reduces R & R time * Increased safety factor * Eliminates unscheduled maintenance * Eliminates hose twisting or binding * Greatly reduces contamination at the connection.
Size SSA-3 SSA-4 SSA-6 SSA-8 SSA-10 SSA-12 SSA-16 SSA-20 SPA-3 SPA-4 SPA-6 SPA-8 SPA-10 SPA-12 SPA-16 Thread Straight Straight Straight Straight Straight Straight Straight Straight Pipe Pipe Pipe Pipe Pipe Pipe Pipe Part No. 04-01966 04-01967 04-01968 04-01969 04-01970 04-01971 04-01972 04-01973 04-01974 04-01975 04-01976 04-01977 04-01978 04-01979 04-01980 Price CALL CALL $44.90 $48.75 $53.60 $55.80 CALL CALL CALL CALL $44.90 $48.75 $53.60 $55.80 CALL
SILICONE HOSE
ID 1/4 3/8 5/8 3/4 OD Wt / Ft. (Lb.) 0.45 .064 0.67 .144 0.95 .220 1.07 .276 Part No. Price / Ft 05-00659 $5.25 05-00660 $6.65 05-00661 $7.95 05-00671 $8.75
This black silicone fire sleeve has a temperature range of -65F to +2000F. The 5/8 I.D. Fits all E185, E225 & 0-300 engine breather tubes. The 3/4 I.D. fits O-470 I IO470 breather tubes. Sold by the foot. 1/4 ................................P/N 05-06832 ....................$4.35 5/8 ................................P/N 05-00672 ....................$6.95 3/4.................................P/N 05-04549 ....................$8.75
1/2 ID size for wires or other sizes for wire insulation or firesleeve for aircraft hose assembly. Colors: Blue Size 1/2 5/8 3/4 7/8 1" Part No. 05-04712 05-04713 05-04714 05-04715 05-04716 Price $6.90 $7.50 $7.90 $10.50 $11.85
108
HOSE ASSEMBLY
To make hose assembly of length L, cut hose to length J. Obtain J length by subtracting proper fitting allowances.
ASSEMBLY INSTRUCTIONS USING 601 HOSE AND 816 FITTINGS USING 303 HOSE AND 491 FITTINGS
To make hose assembly of length L, cut hose to length J. Obtain J length by subtracting proper fitting allowances.
CM WP
Hose & Fitting -3 -4 -5 -6 -8 -10 -12 Dash No. Fitting 1.30 1.30 1.48 1.54 1.88 2.00 2.00 Allowance* (In.) *Allowance for 2 fittings. step 1 Cut hose squarely to length. Use hose cut-off machine or fine tooth hacksaw. Do not remove cover. step 2 Place socket in vise. Do not overtighten vise on thin-walled sockets of lightweight fittings. Screw hose into socket until it bottoms. Back-off 1/4 turn. step 3 Tighten nipple and nut on assembly mandrel. step 4 Lubricate inside of hose and nipple threads liberally. Use lubricating oil, petrolatum or light grease. step 5 Screw nipple into socket and hose using wrench on assy tool hex. Nut must swivel freely when assembly tool is removed. Maximum allowable gap is 1/16 inch. L.P.S.-1 is an excellent lubricant for use in hose assembly.
step 1 - Cut hose squarely to length. Use hose cut-off machine or fine tooth hacksaw. To minimize wire braid flare-out, wrap hose with masking tape and saw through tape. Remove tape before step 2. step 2 - Insert hose in socket with a twisting, pushing motion until hose is in line with back of socket threads. step 3 - Important-mark hose position around hose at rear of socket. Use a grease pencil, painted line or tape. step 4 - Lubricate inside of hose & nipple threads liberally. Use SAE 30 lubricating oil. Avoid getting oil in the cutting spur of the nipple. step 5 - Carefully insert nipple and engage nipple and socket threads while holding hose in position with other hand. Make sure that hose does not push out of socket by observing mark made in step 3. step 6 - Complete assembly using wrench while continuing to hold in position. Maximum allowable gap is .041 in sizes 3, 4, & 5, and .031 in size 6 & up. step 7 - IMPORTANTcheck for hose push-out by observing hose position mark. None should be evident.
ME HA AP LG EP CS IN EL AV
Note: Hose push out after proof test should not exceed 1/32 on sizes 12 and up. None is allowable on smaller sizes.
TO PS BV
*10781-4 Clamp to be used to secure the Firesleeve material on each end over the basic hose assembly. End Dip for Firesleeve Specify size. $2.85 - $3.05 P/N 5027 ...................... $136.95
109
Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high tensile fiber cord. Cover - Synthetic rubber. Identification: LP-MIL-H-5593-size, date of manufacture, manufacturers code (CAGE) marked on one side of the hose. Stratoflex 193-size marked on other side of hose. Yellow markings are repeated every 12 inches. Application: Low pressure air and vacuum instrument systems. Vacuum service 20Hg sizes -2 thru -6; 10Hg sizes -8and -10. Temperature range: -65 to +165F / (-54 to +74C) Part No 193-2 193-3 193-4 193-6 193-8 193-10 Tube O.D. .35 .41 .48 .60 .75 .87 Hose ID. .125 .188 .250 .375 .500 .625 Max Press 300 250 200 150 150 150 Weight per In. (l.b.) .0038 .0050 .0058 .0079 .0015 .0138 Price Per Ft. $6.94 $3.50 $3.45 $3.95 $6.95 $9.25
110
DUCTING
AIRCRAFT FLEXIBLE DUCTING
CAT SCAT
CAT - CAT type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neopreneimpregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65 to over 350F. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications. SCAT - SCAT type ducting has the same type construction as CAT except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65 to over 550F. Not recommended for negative pressure applications.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CEET
SCEET
CEET - CEET type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT
except wire between plies. For use in hot or cold air applications and for conveying fumes at temperatures ranging from -65 to over 350F. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications.
SCEET - SCEET type ducting has two plies of silicone rubber-impregnated fiberglass, similar to
SCAT except wire between plies. Ideal for use in conducting extremely cold or hot air at temperatures from -80 to over 550F, and for conveying fumes. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications. Dash No. -2A -3 -3A -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -18 20 24 Inside Diameter 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/2 5 6 CAT Part Number 05-29801 05-29802 05-29803 05-29804 05-29805 05-29806 05-29807 05-29808 05-29809 05-29810 05-29811 05-29812 05-29813 05-29814 05-29815 05-29816 05-29818 05-29820 05-29824 Price Per Foot $4.60 $5.25 $5.50 $5.90 $6.50 $5.75 $6.25 $6.25 $6.75 $7.50 $7.65 $8.75 $9.50 $9.75 $9.45 $10.50 $10.75 $11.75 $12.50 Part Number 05-29901 05-29902 05-29903 05-29904 05-29905 05-29906 05-29907 05-29908 05-29909 05-29910 05-29911 05-29912 05-29913 05-29914 05-29915 05-29916 05-29918 05-29920 05-29924 SCAT Price Per Foot $6.25 $4.95 $5.25 $5.85 $6.50 $6.50 $9.50 $6.95 $7.90 $8.45 $8.95 $9.75 $10.75 $9.95 $10.85 $11.00 $12.95 $13.75 $16.75 CEET Part Number 05-30501 05-30502 05-30503 05-30504 05-30505 05-30506 05-30507 05-30508 05-30509 05-30510 05-30511 05-30512 05-30513 05-30514 05-30515 05-30516 05-30518 05-30520 05-30524 Price Per Foot $6.85 $5.75 $6.25 $6.75 $7.50 $7.50 $7.75 $7.90 $8.00 $8.50 $8.75 $9.85 $10.50 $11.25 $10.50 $11.90 $12.85 $13.75 $16.75 SCEET Part Price Per Number Foot 05-30601 $7.00 05-30602 $14.75 05-30603 $6.00 05-30604 $6.00 05-30605 $6.75 05-30606 $7.25 05-30607 $14.75 05-30608 $8.85 05-30609 $9.90 05-30610 $9.95 05-30611 $11.50 05-30612 $11.90 05-30613 $11.90 05-30614 $13.25 05-30615 $14.00 05-30616 $14.85 05-30618 $15.95 05-30620 $18.90 05-30624 $20.50
Diameters not listed are available as a special order in full lengths only. Order CAT 2-3/4 diameter for Whisperflow air vents. Full factory lengths are 10 ft to 13 ft pieces on CAT, CEET, SCAT, & SCEET, except 5/8 id (PN 05-30501 is only 9ft).
Short lengths of ducting can be spliced to eliminate waste. For permanent splices, an adhesive should be applied to the ends before joining. To relieve wire tension when cut, bend end of wire in slightly.
This cover is constructed of a light-weight stiffener panel, 1/2 foam padding and headliner fabric. A flap extends into the back side of the wing root frame and glues in place for a professional finish. P/N 09-17345....................... $85.50
111
SOUNDPROOFING INSULATION
E-A-R-COMPOSITE DAMPING FOAM NOXUDOL SOUNDPROOFING LIQUID
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ADC-224 is a mid-temperature skin damping composite of 0.25 thick damping foam fixed with 0.005 thick aluminum foil and backed with pressure sensitive adhesive. Used in aircraft for weight efficient damping and to reduce radiated noise. Meets FAR 25.853 (A) for fire resistance. Furnished in 27 x 48 sheets. P/N 09-00181 ....$148.95 / sheet Less 10% discount on 10 or more sheets
A paint-on soundproofing material that is applied to metal surfaces to reduce vibration and reverberant noise. Use to fill cracks and spaces where noise can enter. Buff color and can be painted. Paint engine mounts to increase fire resistance! Odorless and nontoxic when dry. Waterbased product. Non-Flammable. Shelf life: 1-year. Not FAA approved. Quarts .......... P/N 09-42740 .......$24.70 Gallon ........... P/N 09-00772 .......$96.75 This is a 1/8 thick by 2 wide self adhesive tape that can be placed on metal panels and wrapped around ducts to reduce vibration and reverberant noise transfer. Not FAA approved. 30 ft. rolls. 2 wide P/N 09-42745 ........................$23.75/ea. 1 wide P/N 09-00381 ..........................$8.65/ea.
Designed for damping resonant vibrations of thin sheet metal, these panels are pressure sensitive, specially compounded polyurethane damping foam with an aluminum foil backing. The adhesive on the foam is protected by a peel-off paper covering. It is an excellent insulator for conducted heat and is an excellent heat reflector. Fire-resistant and self-extinguishing per FAA test procedure. Excellent moisture resistance. Resistant to most solvents. Easily applied with only hand pressure for a permanent bond even on rough, irregular surfaces. Used extensively in commercial aircraft and highly recommended for metal home builts. Apply to firewall, fuselage anywhere a vibration problem exists. Wt.4 oz./sq. ft., 1/4 thick. Meets FAR 25.853 3M Sound Damp Panel 6 x 48............ P/N 09-30206 ......... $29.75 ea. 3M Sound Damp Panel 12 x 48.......... P/N 09-30212 ......... $55.75 ea. 3M Sound Damp Panel 18 x 48.......... P/N 09-30218 .......... $72.85ea. Less 15% on 12 or more pieces
This heavy duty, wear resistant vinyl mat with foam backing can be placed on aircraft floors to reduce noise & vibration. 54 width. P/N 09-42750 .......... $16.75/lin.ft. Floormat 4 wide X 25 Roll ................ P/N 09-00433 ............. $41.75/roll Floormat without foam backing .......... P/N 09-42751 .......... $13.75/lin.ft.
A 2 Mil. (50 micron) high strength aluminum foil coated with an aggressive, high temperature acrylic adhesive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces. Coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperature with superior low temperature performance below freezing - this is the ultimate in cold weather tapes. Recommended for use at normal and elevated temperatures also. Applications: Primarily used for vapor sealing fiberglass ductboard and sheet metal ducts; can also be used on FSK systems.tape described above.2 x 25 Yd. Roll. Description 1X 25YD 2X 25 YD Part No. 09-01273 09-01274 Price Description Part No. $11.35 4X25 YD 09-01275 $24.50 6X50 YDS 09-01276 Price $38.45 $59.50
Sound measurement indicates that sometimes the noise levels are so high in some aircraft that damage to hearing over time can result. This How-To manual discusses the advanced techniques to sound proofing the light aircraft and drastically reducing such noise. Information presented is applicable to all types of planes from puddle-jumpers to jets. P/N 09-42755 .................... FREE
ISD Chafe Tape is a durable Teflon material with a pressure sensitive adhesive which resists solvents, and oils. Designed specifically to prevent aluminum chafing between airframes and engine cowls. It helps prevent black streaking on aircraft exterior due to cowl chafing. Not FAA/PMA approved. Operable temperature range: -100F to +500F. Width: 1. Roll length: 6 yds. Tkns: .012 P/N 09-31805 ..................... $36.75/roll
This material is excellent for reducing noise levels in all types of certificated and homebuilt aircraft. It is a closed cell vinyl insulating material which will not absorb water or oil. Has fire retardant qualities and meets FAR 25.853a Appendix F, Pt1. It is smooth on one side for easy attachment to the inside cabin skins, sides, top and front firewall. Excellent for helicopters as well. Furnished in bulk 48 wide sheet, it is easily cut by scissors and attached with contact cement. Available in black only. The Flammability Report (Burn Certs) are available on request. Wt. / ThickLineal ness ft. 1/8 1/4 3/8 1/2 P/N 09Price Per. Thick- Wt. per P/N Lineal Ft. ness Lineal ft. 09$5.45 $13.50 $12.65 $14.50 3/4 1 2 1.4 lbs. 42727 2.0 lbs. 42730 4.0 lbs. 42760 Price Per. Lineal Ft. $20.50 $22.25 $31.85 $34.50
These 1 wide rolls of Teflon on fiberglass anti-chafe tape are excellent for use on engine cowlings to keep cowl components from chafing. The tape is available in 5 mil thick and 10 mil thick and comes with a silicone adhesive on the tape. Just peel back liner and install. Rolls are 1 wide x 36 yds long. 5 Mil Anti-Chafe tape .......... P/N 05-01024 .......$42.90/roll 10 Mil Anti-Chafe tape ........ P/N 05-01025 .......$56.85/roll
.25 lbs. 42719 .60 lbs. 42720 .80 lbs. 42723 1.0 lbs. 42725
UniWrap silicone rubber sealing tape bonds to itself permanently to protect, repair, join, or insulate virtually any type of part on which ordinary tape can be used. But the big difference between UniWrap and ordinary tape is that it fuses to itself permanently to form a homogenous mass and provides unprecedented protection and insulating characteristics. UniWrap uses no adhesives so it is non-tacky. It has a 12 month shelf life and after fusing is unaffected by moisture, cold, heat, ozone shock, or vibration. Meets MIL-I-46852 Type II as well as strict aerospace industry performance requirements. Available in red, black, gray, or white. Furnished in 10 yard rolls, UniWrap is 1 wide and 0.020 thick UniWrap (red) P/N 09-30450 .................$12.85 Off-white, 100% non-asbestos woven tape. Unaffected by most chemicals and temperatures. 1 x 15 ft. Roll P/N 09-31800 ........... $16.75 rl
Super Soundproofing Foam Mat for noise control: A closed cell vinyl-nitride noise control FOAM suitable for application to cars, boats, planes, home and office, anywhere a noise control mat is needed. Wont absorb moisture or odor, long lasting and durable. An excellent thermal insulator! (FAA Approved for aircraft, too!) Just apply with vinyl or contact cement to reduce and absorb sound. There may be small variances in the width of this product. 1/8 w/adhesive ......................P/N 09-01243 .......................$8.75 1/4 w/adhesive ......................P/N 09-01244 .....................$12.95 3/8 w/adhesive ......................P/N 09-00443 .....................$16.65 1/2 w/adhesive ......................P/N 09-00444 .....................$20.75 3/4 w/adhesive ......................P/N 09-01245 .....................$27.50 1 w/adhesive .........................P/N 09-01246 .....................$27.50 2 w/adhesive .......................P/N 09-01247 ................... $59.00
SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS!
112
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
No.
Aircraft Model
No.
Aircraft Model
BEECHCRAFT SX-01 Bonanza 35-E35 05-04256 $695.00 05-04256-1 $1,050.00 N/A Bonanza F35-M35 and A33-B33 (and SX-02 05-04257 $640.00 05-04257-1 $975.00 N/A older with tiny 3rd window added) Bonanza N35-P35, C33-E33, and SX-03 F33C (and older 05-04312 $640.00 05-04312-1 $1,127.00 N/A with long 3rd window added) Bonanza/Baron S35-V35/F33/A55B55 (and older SX-04 05-04313 $695.00 05-04313-1 $1,086.00 N/A with large baggage and long 3rd window added) Bonanza/Baron F33-G33 and B55SX-05 05-04314 $900.00 05-04314-1 $1,300.00 N/A E55 (with extended baggage) Bonanza/Baron SX-06 36-A36 and B58 05-04315 $895.00 05-04315-1 $1,565.00 N/A (through 1978 Bonanza/Baron A36-B36 and B58 N/A SX-07 (1978 and newer) 05-04316 $1,170.00 05-04316-1 $1,570.00 (with extended baggage) Bonanza 33/35/36 Windsh/d set (without facN/A N/A N/A SX-08 tory speedslope) 05-04317 $165.95 Includes upper material forward of instrument panel Bonanza 33/35/36 Windsh/d set (with factory speedN/A N/A N/A SX-09 slope) Includes 05-04318 $125.95 upper material forward of instrument panel N/A 9 ft. SX-10 Duke 05-04319 $1,370.00 N/A King Air 90 Coming Soon! King Air 300 Coming Soon! *Ensure you order the correct Bonanza kit by checking the following modifications: Bonanza 35-E35 with tiny 3rd window modification, order kit for F35-M35. Bonanza 35-M35 (or A33-B33) with large third window and hat shelf modification, order kit for N35-P35. Bonanza 35-P35 (or A33-E33) with large third window and expanded baggage modification, order kit for S35-V35B. PIPER Comanche PA24/ PA30 (through SX-11 05-04320 $820.00 05-04320-1 $1,075.00 N/A 1963) (*Floor not drilled for access) Comanche PA24/ SX-12 PA30 (1964 and 05-04321 $820.00 05-04321-1 $1,170.00 N/A 1965) Comanche PA24/ SX-13 PA30 (1966 and 05-04322 $820.00 05-04322-1 $1,170.00 N/A newer) Early Arrow, Cherokee, Warrior SX-14 05-04323 $748.00 N/A N/A 9 ft. PA28-160, 180, 235 Arrow, Cherokee, SX-15 Warrior PA28-160, 05-04324 $750.00 N/A N/A 9 ft. 180, 235 Cherokee Six, Seneca, Lance, SX-16 05-04325 $1,205.00 N/A N/A 11 ft. Saratoga PA32, PA34
PIPER CONT. PA46 Malibu, SX-17 05-04326 $1,495.00 Meridian SX-18 Navajo 05-04327 $2,100.00 SX-34 Aztec 05-04329 $1,275.00 Tomahawk Coming Soon! CESSNA SX-35 150 05-04330 $605.00 SX-36 152 05-04331 $605.00 SX-24 170 05-04332 $1,055.00 SX-20 172 05-04333 $745.00 SX-32 177, 177 RG 05-04334 $880.00 SX-37 180/185 05-04335 $745.00 182 (except earliSX-21 est without rear 05-04336 $745.00 window) 206 Coming Soon! 210 (except earliSX-22 est without rear 05-04337 $895.00 window) 310 (without rear SX-23 05-04338 $1,055.00 window) SX-24 310 05-04339 $1,055.00 SX-26 337, 337P 05-04340 $910.00 SX-25 340 05-04341 $1,650.00 SX-33 414A 05-04342 $2,105.00 SX-38 500, 501 Citation N/A N/A COMMANDER SX-43 112/114 05-06834 $910.00 MOONEY SX-27 M20 to M20E 05-04344 $820.00 SX-28 M20F to M20K 05-04345 $900.00 M20L to M20S Coming Soon! NAVION SX-31 A, B 05-04346 $915.00 VANS RV (EXPERIMENTAL) RV-6 (Firewall, SX-41 N/A N/A Sidewalls, Belly) RV-7 / RV-9 (FireSX-39 wall, Sidewalls, N/A N/A Belly) RV-8 (Firewall, SX-30 N/A N/A Sidewalls, Belly) RV-10 (Firewall, SX-40 Sidewalls, Roof, N/A N/A Belly) BULK MATERIAL SX2 x 36 x 48 SoundEx Sheet 2000 SX1-1/4 x 36 x 48 SoundEx Sheet 1250 SX1-1/8 x 36 x 48 SoundEx Sheet 1125 SX-875 7/8 x 36 x 48 SoundEx Sheet SXFW3/4 x 48 Firewall Matt 750 3/4 x 36 x 48 Black Mat SX-600 (Flame certified for Firewall) 1/2 x 48 Black Mat SX-500 (Flame certified for Firewall) SX-250 1/4 x 48 Black Mat SX-125 1/8 x 36 x 48 Black Mat SXB1/2 x 48 Belly Mat 500 SXB1/4 x 48 Double Bubble 250 SXB1/4 x 36 Double Bubble 250/36 SXT2 Aluminum Foil Tape 200 SXSoundEx Glue 1357
N/A N/A
N/A N/A
8 ft. 10 ft. 10 ft. 8 ft. 12 ft. 13 ft. N/A 8 ft. 6 ft. 7 ft. N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A N/A 05-04343-1 $4,244.00 N/A N/A N/A N/A N/A N/A N/A N/A
05-04351 05-04352 05-04353 05-04354 05-04356 05-04357 05-04358 05-04359 05-04360 05-04361 05-04362 05-04363 05-04364 05-04365
$154.50 per sheet $128.95 per sheet $117.85 per sheet $109.75 per sheet $42.50 $89.95 $27.85 $17.75 $19.50 $33.85 $11.25 $6.50 $14.95 $15.50 per roll ft. per sheet per roll ft. per roll ft. per sheet per roll ft. per roll ft. per roll ft. per roll ft per 6oz. tub
113
INSULATION MATERIALS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AIRCRAFT INSULATOR MATERIAL
THE INSULATOR
The Insulator is one of the finest sound proofing and thermal insulation materials available, and will last the life of the aircraft. The dual sided Insulator panels are ideal for installation on interior skin, floor, engine covers, doors, headliners, and bulkheads. The Insulator uses multi - layered fiber plys bonded to reinforced high performance foil to provide optimum barrier to acoustics, radiant heat, thermal heat, and moisture. Insulator is available in 4x 6 panels or by the lineal foot (4 wide). Install Insulator with Sticky Stuff spray adhesive (shown below) and Insul-Tape. Not FAA approved.
3M 9377 Tape has a differential adhesive system with a high-tack acrylic that bonds to the top-layer substrate and a rubber-based adhesive system that attaches to the flooring material. One side is black and attaches to the flooring material with an acrylic-based adhesive. The white side of the tape is a rubber-based adhesive that provides a bond to the floor surface. Firm application pressure helps develop better adhesive contact and improve bond strength. The bond strength will build over time reaching maximum strength at 72 hours. FAR-25-.853 P/N 09-02133 ................. $35.85
INSULATOR PANELS
Insulator one ply 4 x 6 sheet. Single sided only. 3/8 thick....................................................P/N 09-27400 .. $21.65 ea Discount: less 15% on orders for 20 sheets (assorted)
Orcotape OT-16A is a lightweight, pressure sensitive, reinforced, metallized polyvinyl fluoride tape which is designed to be used in the fabrication, repair & installation of thermal/acoustic blankets. It is the companion tape to be used with the Orcotek strip blanket to seal the edges. Furnished in 60yd rolls. 2 width.................. P/N 09-45040 ............$131.95/ea. 3 width.................. P/N 09-45045 ............$209.95/ea. 5 width.................. P/N 09-02554 ............$119.00/ea.
Stick Stuff is one of the best performing spray adhesives available. It is ideal for installing the Insulator and has many other uses. One spray can will install two 4 x 6 panels. P/N 09-27415.......$11.75/ea.
Aircraft insulation by the foot. This durable, state-of-the-art, light weight blanket meets the thermal and acoustic requirements of the major aircraft manufacturers and is now available for your airplane. The blanket consists of fiberglass enclosed in moisture barrier. It can be used as is or cut in special shapes. Use Orcotape OT-16A 2 or 3 tape to seal the open edge(s) of the blanket. Strip blanket available in 1 thick x 20 wide or 2 thick x 20 wide. 1 thick x 20 wide..............P/N 09-45015 ............$22.85/linear ft. 2 thick x 20 wide..............P/N 09-45020 ............$26.25/linear ft.
INSUL-TAPE
3M Interam Mat I-10A, 49 inches by 25 feet (one roll): Ceramic fiber based material that expands into low-density insulation blankets when exposed to high temperatures or flames. Outer foil layer is aluminum. P/N 03-00136 ..................$682.00
Insulating your aircraft made easy! Blanket is ready to install as is or can be modified to fit special areas. Each box contains all the materials to insulate your aircraft including an Orcotek strip blanket, tape, cutting knife, instructions and built-in work surface with measuring grid. Furnished as follows: 1 blanket-in-a-box contains 1 roll (1x20x100) Orcotek strip blanket, 2 rolls of Orcotape OT-16A (2), utility knife, dispenser box-work platform P/N 09-45005 ................. $2,079.00/box 2 blanket-in-a-box contains 1 roll (2x20x50) Orcotek strip blanket 1 roll of Orcotape OT-16A (3), utility knife, dispenser box/work platform P/N 09-45010 ................ $1,065.00/box
BLANKET IN-A-BOX
Valco Cincinnati multi-purpose sealant is a paste-like, one component material that cures to a tough, rubbery solid upon exposure to moisture in the air. Because it does not flow due to its own weight, this sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, and painted and many plastic surfaces. Valco mutli-purpose sealant has good resistance to weathering vibration, moisture, ozone and extreme temperatures. It may be applied in subzero weather without loss of extrusion or physical property characterisitics and is effective to -46C (-50F). Fully cured Valco multi-purpose sealant can be used for extended periods at temperatures up to 204C (400F), and for shorter periods as high as 218C (425F) 2 oz. tube ...................... P/N 09-00277 ......................$6.95 7 oz. tube ...................... P/N 09-00278 ....................$14.85 Originally designed for NASAs reentry spacecraft, VHT FlameProof is a scientifically formulated compound designed to withstand temps. up to 1500F (816C) VHT It survives where other paints cant, shields & protects, maintains the finish, prevents rust & corrosion, and resists oils & solvents. For aircraft applications the typical use is on high temperature steel components such as exhaust & turbocharging systems. Excellent for use as a heat resistant & anticorrosion coating on exhaust manifolds and turbine casings. Both Flat Aluminum and Flat Black are non-facing colors. Flat Aluminum 16 oz. aerosol spray............P/N 08-00713 .......... $11.95 Flat Black 16 oz. aerosol spray ...................P/N 08-00714 .......... $11.95
114
BAFFLING MATERIAL
A new material made from washed ceramic fibers with binders added to form a lightweight, flexible asbestos-free insulation. Withstands temperatures to 2300 F. Excellent for aircraft firewalls. Available in 24 wide rolls in 1/16 and 1/8 thicknesses. 1/16 Thick ........... P/N 05-02678 ......$5.85 Lin ft. 1/8 Thick............ P/N 05-02679 ....$10.00 Lin ft. Discount Less 15% On 50Ft. Per Size Used as a hi temp coating over Fiberfrax, or other pourus materials. Can also be used as an adhesive to bond Fiberfrax or other pourus material together. Coverage: 15 sq. ft. per pint & 120 sq. ft per gallon. Fiberfrax Adhesive Pt ............. P/N 05-00800........... $21.50 Fiberfrax Adhesive Gal ........... P/N 05-00900..........$173.95 Neoprene bar of proper Shore hardness for fabrication of shock absorber donuts. Used in Osprey II nose gear. Available in 2 sizes: 1/2 Th x 2 W ................ P/N 05-02000....... $10.50/ft. 3/4 Th x 3 W ................ P/N 05-02100....... $16.50/ft. Will not deteriorate in petroleum products. Recommended for oil and solvent service. Wt. 6 oz. per sq. ft. 1 Size: 1/16 thick x 36 wide roll. Sold in 36 1 width only. Price is per Lin. Ft. P/N 05-01000 ...............$3.30 Discount: Less 15% On 20 Ft. Heat-proof and fire resistant. Made of woven fiberglass. Non-metallic, commercial grade. Withstands up to 1000F. 2 wide x 1/16 thick. Wt. 4-1/2 lbs. per 100 ft. roll. ............................... P/N 09-31500 ............... $0.87/ft. Less 15% On 100 ft.
FIBERFRAX
This neoprene coated cloth is designed for applications where its superb heat and flame resistance provide an extra margin of protection for people and equipment. Self-extinguishing, it is used as aircraft firewall barriers, protective sleeves and tadpole tape covers, flat seals, gaskets, mounts and door seals. It is ozone and weather resistant, and can be used against caustics, gasoline, oil, water and steam. It does not support combustion and will operate in continuous temperatures from -40F to +200F. Thickness .070. Sold in 60 Width only. P/N 05-00600 .............. $58.85 ft. Cut from Pyroglass cloth above. 3x 84 ........ P/N 05-00700 ...... $29.95 Friction between baffle seal and cowl transfers engine motion and vibration
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PRE-CUT PYROGLASS CLOTH BAFFLE STRIP COWL SAVER BAFFLE SEAL MATERIAL
Baffle Seal Cowl
NEOPRENE BAR
HEAT-PROOF TAPE
This blanket is .250 thick, weighs only 9.5 oz/sq. ft. and is flexible enough to cover compound curves. The heat side of the blanket is covered with stainless steel, the other side is aluminum It is easy to rivet or can be glued into position. Sold by the running foot. Temp. range up to 1000F.24 wide P/N 05-00948 .......................$24.75 Less 15% on 25ft. roll
A premium nonslump sealant bonds to most common construction material to form a flexible seal. Superior Adhesion. Remains elastomeric and is weather resistant. This product is great for through penetrations and may also be used for fire rated construction joints. P/N 05-00949 .......................$21.25
Contains 24x48 sheet of Firewall 2000 and one tube of firewall caulk.. P/N 05-00950 .....................$119.95 Firewall blanket is black in color and comes 48 wide. Looks best when in 3 sections, anything larger has seams and stitching lines do not match well. Note: This material is used for cosmetic purposes on the inside portion of a firewall to cover up an unsightly firewall. It is not fireproof and is not an actual firewall material. Sold by the foot. P/N 09-00276..$42.25 /Linear ft.
FIREWALL BLANKET
Cowl Saver Baffle Seal Material has 10 times Less Friction! - One side is silicone and the other is the revolutionary friction free surface unique to the patent pending Cowl Saver. Cowl Saver dramatically reduces the friction between your cowl and baffle seals. Low Friction Saves You Money! - Reduces transfer of damaging engine vibration to the engine cowl Minimizes cowl chaffing and erosion from baffle seals. Extends baffle seal life. Reduces expensive cowl and cowl fastener repairs. Reduces fatigue and cracking in aluminum baffles and cowl skins. The cowling even goes on easier! - Unbeatable Performance. Ideal balance of flexibility and stiffness to insure a proper seal. Fiberglass reinforced. Meets industry standard AMS3320G specification. McFarlane quality you can count on! Not FAA-PMA approved Part Number Thickness Size Color Spruce Price CS085X36X36G .085 36 x 36 Gray 05-03403 $219.85 CS085X18X36G .085 18 x 36 Gray 05-03404 $124.50 CS085X3X108G .085 3 x 108 Gray 05-03405 $65.50 Accessories 6036 BAFFLE SEAL RETAINER STRIP - A baffle seal retainer strip used as a retainer for riveting baffle seals to baffles. 7/16 inch x 12 inch strips - Cut to desired length during installation. P/N 05-03399 ...............$2.20 RIVET KIT 2 - A baffle seal rivet kit containing soft Mil-Spec rivets that will not deform the baffles. Several sizes are included for various baffle thickness and hole sizes. P/N 05-03401 .............$13.95 BAFFLE-KIT-1 - A convenient kit that includes (1) CS085X3X108G Cowl Saver Baffle Seal Material, (1) RIVET-KIT-2 Soft Rivets, (5) 6036 Retainer Strip P/N 05-03402 .............$79.85 BAFFLE-KIT- 2 - This new baffle kit with more material. This kit is best for larger aircraft or curved baffle seals that cannot be cut from three inch strips. The new kit includes (1) 18x36 inch piece of Cowl Saver material, (2) Baffle Seal Rivet Kits and (10) Baffle Seal Retaining Strips. P/N 05-04108 ...........$148.75 BAFFLE-KIT- 3 - Part number Baffle-Kit-3 is a convenient kit that includes (1) 3 x 156 (13ft) Cowl Saver Material, (1) Baffle Seal Rivet Kit, and (7) Baffle Seal Retainer Strips P/N 05-04557 .............$99.85
INSPECTA-SHIELD
FAA approved replacement Engine Baffle. This material is easily identifiable by its textured finish. 32oz fiberglass reinforcement mat. Boasts a -60 to 550F range. Price Size Part No. Price $73.50 1/8 x 36 x 40 05-04657 $188.95 $114.95 1/8 x 36 x 40 05-04659 $199.75 $104.95 1/8 x 36 x 40 05-04661 $199.50
Color Size Part No. Black 1/8 x 3 x 9 05-04656 Red 1/8 x 3 x 9 05-04658 Blue 1/8 x 3 x 9 05-04660
SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS!
115
$49.75
$79.95 $68.75
Silicone (reinforced) with fiberglass cloth. Mil spec: AMS3320 Rev. G; Material Thickness: .093 (3/32) O.E.M Spec; Temp Range: -65 to + 550 .093X3 Scat Orange................................P/N 05-04717-1 ........... $3.75 .093X3 Red .............................................P/N 05-04717-2 ........... $3.75 .093X3 Black ...........................................P/N 05-04717-3 ........... $5.25 .093X3 Medium Blue ...............................P/N 05-04717-4 ........... $3.75
$118.95 PA-28 Fuel pump baffle seal. Models: PA28-140, 150, 160, 180 replacement seal for the fuel pump metal baffle that surrounds the fuel pump assembly. Scat Orange ............................. P/N 05-04706-1 .......................... $35.75 Red ........................................... P/N 05-04706-2 .......................... $35.75 Black ......................................... P/N 05-04706-3 .......................... $35.75 Medium Blue............................. P/N 05-04706-4 .......................... $35.75 Dark Blue .................................. P/N 05-04706-5 .......................... $35.75
The Spring-Steel reinforcement channel has Gripper teeth to hold firmly in place. And when your door is closed the seal is pinched between the airframe. You can not pull the seal out when the door is closed...however applying adhesive into the channel is recommended. Length: 9ft. P/N 05-02203 ......$114.75
GAP SEAL
Designed for experimental aircraft that have been identified as needing gap seals to improve control response and effectiveness. Features transparent, UV stable film with a long aging, acrylic adhesive. Remains flexible down to -40 deg. F. Easy to install with the use of simple hands tools. Kit includes 3M 8674 Film (PN 09-01643}, 86A Adhesion Promoter to ensure maximum adhesion, Scotchbrite pad (PN 09-01753) and 3M Application Solution (PN 06-00604) P/N 05-03480 ....................$89.75
116
U CHANNEL
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ANTI-CHAFE MOLDING
V Strip Canopy Channel 20 Ft. required for Long-EZ. #10 .....................P/N 05-01900 .............. $0.68 ft
V STRIP
QUARTER ROUND SOLID DOOR SEAL - Closed cell black neoprene with smooth outer surface. 1/2 Legs, 3/4 Curve, 1/2 Radius. 25 ft. Roll P/N 05-00000 ............................. $28.75 PIPER DOOR SEAL - Small cell sponge rubber. 25 foot
rolls JM189139. P/N 05-00010 ............. $62.50
GB4-4A: Baffle Seal Pop Rivet, Button Head. 1/8 Dia. x 3/16 Grip Requires a metal baffle strip or back-up washer to secure. Pkg. of 100 ...... P/N 05-56100 ..... $7.85 GB-A4: Back-up Washers Pkg of 150 ....... P/N 05-56130 ..... $4.25 GB-SF- 3/16: Baffle Seal Fastener (Post Type) for joining sides or overlapping of baffle material. Includes one male and one female piece. Each ................ P/N 05-56140 ..... $0.56 GB4-3AW: Baffle Seal Pop Rivet, Button Head, White. 1/8 Dia. x 3/16Grip. Pkg. of 100 ...... P/N 05-00132 ..... $6.90 GB4-3AB: Baffle Seal Pop Rivet, Button Head, Black. 1/8 Dia. x 3/16Grip Pkg. of 100 ...... P/N 05-00133 ..... $5.60 GBL4-4A: Baffle Seal Pop Rivet, Large Flange, Silver. 1/8 Dia. x 3/16Grip Qty. 100 ........... P/N 05-00134 ..... $6.75 GBL4-4AW: Baffle Seal Pop Rivet, Large Flange, White. 1/8 Dia. x 1/4Grip Qty. 100 ........... P/N 05-00135 ..... $8.20 Silicone Revolving Punch Tool: Makes various size holes in baffle material. Each ................ P/N 72............... $10.50 This seal is riveted to the firewall on the Cessna 150, 152, 172, and 182. Meets MIL SPEC: AMS3320-.093 black. 1-1/2" wide x 84" long. P/N 05-04489 ......$27.50
Makes attaching baffle material much easier. Includes 12 soft aluminum fasteners. Pkg. of 12 Sets ..... P/N 05-01829 ....$6.25
PIPER WING ROOT SEAL - Black packaged in 12-foot lengths, adequate for one wing root. 12 ft. Roll P/N 05-00030 ............................. $47.50 BEECH WING ROOT SEAL - Black, packaged in 12-foot lengths, adequate for one wing root. 12 ft. Roll P/N 05-00040 ............................. $59.75 J-3, PA-18 DOOR GAP SEAL - 24 length Standard color, black. P/N 05-00953 ............................. $22.50 Note: The above moldings are not FAA approved.
Revolutionary new seal design! Custom made from a special hybrid rubber compound, the new seal is superior to any seal on the market. The seal comes with pressure-sensitive adhesive to make the installation easier. The kit includes door seal, seal lube, installation instructions, engineering drawing, and Instructions for Continued Airworthiness (ICA). Seals, create an airtight and water tight closure. P/N 05-04639 .........................$54.95
117
EPDM WEATHERSTRIP
The kit includes: 15 Foot Roll with Adhesive, Anti-Chafe Seal and Catalyst.Sold in 15ft. rolls. P/N 05-00664 ..........$33.50
A Complete set of black silicone chafe seal for the upper cowl doors for Beech models 33, 35, 36. 3/8 wide X .020 thick. Kit includes silicone cement. P/N 05-00665 ................ $44.75 A Complete set of black silicone nose gear door seals designed to keep the nose gear doors from chafing against the airframe. Fits models 33, 35, 36. Kit includes silicone cement. ....... P/N 05-00666 ....$38.75
As a standard door seal the RB-5022 has worked well in many different applications such as on piper and some cessna applications. This is a solid 1/4 round seal it is 5/8"x5/8". It is manufactured to meet the MIL-R-6130C-type 2 neoprene spec. and the FAR.25.853-B burn spec. They recommend that you use their T-990 precleaner and 1100-2 glue to install it. P/N 05-04753 ..............................$5.25/ft.
A Complete set of black silicone chafe seals cut to the original design. These seals are cemented to the underside of the wing to reduce the chafing of the main landing gear doors when closed. P/N 05-00667 ................. $49.85 A set of two tail root seals for models 3336. P/N 05-00669 .................. $69.50
AMS3303 silicone seal temperature range -65 to +350. Beechcraft tail root seal. 15 foot length. P/N 05-00669 .................................. $69.50
A set of two upper wing seals for models 33, 35, 36, 55, 58. Includes lower wing seals (2)......P/N 05-00668 .....$166.95
This fiberglass reinforced silicone seal (1/16 thick) makes an excellent replacement for various airbox and heater box seals used in a variety of aircraft. Furnished as a 6 x 6 piece; Black. P/N 05-00662 .................$13.70
Developed from a special rubber compound that meets military specifications and FAA requirements for aircraft seals. Has a memory, compresses and conforms to the sealing surface providing a perfect seal. Comes with pressure sensitive adhesive that makes it easy to apply and bonds well with any metal surface painted or bare. Installs in the channel on the fuselage opening. Provides for an air- and water-tight seal. Detailed instructions, an engineering drawing for installation of the new seal, including instructions for adjustment of the door as well as removal of the old seal from the door(s). Please call or visit our website for additional photos and models. Description PA-28 Front Entry Door PA-28 Rear Baggage Door PA-32 Front Entry Door PA-32 Front Baggage Door PA-32 Rear Entry Door w/Cargo Door PA-34 Front Entry Door PA-34 Front Baggage Door PA-34 Rear Entry Door w/Cargo Door Mooney Aft Baggage Door Mooney Storm Window Seal Mooney Front Entry Door Not Recommended for years 1998 - 2009. Mooney All MK20 Series Front Entry Door Mooney Door Seals Experimental Part No. 05-01240 05-01241 05-01242 05-01243 05-01245 05-01240 05-01247 05-01248 05-04859 05-02483 05-03626 05-04858 Price $79.95 $49.50 $79.75 $58.50 $89.95 $79.95 $51.75 $89.95 $49.95 $19.95 $129.95 $79.95
This seal makes an excellent replacement for felt type seals or other neoprene P-seals found in various aircraft. Overall size is 1-3/8 with a 5/8 bulb. Similar to Cessna #S2729-1.Note: Use GBL4-4AB large flange (black) pop rivets to install (PN 05-00483). P/N 05-00663 .......... $8.25/ft.
This seal makes an excellent replacement for felt type seals or other neoprene P-seals sound in various aircraft. Overall size is 1-3/8 with a 7/8 bulb. Sold by the foot. Note: Use GBL4-4AB large flange (black) pop rivets to install (PN 05-00483). P/N 05-02144 ............... $9.50/ft.
AMS 3303 silicone seal -65 to +350 for Beechcraft T34 Canopy Seals. Package includes: 1 ea Canopy Seal 50.0 Long 2 ea. Canopy Bumper Seal 21.0 Long 2 ea Canopy Bumper Seal 48.0 Long P/N 05-04247 ..................... $119.50
19/23/24/33/35/36/50/55/58/76/77/95 Series Window Seal, Storm Window.(Framless) P/N 05-03613 ....................... $19.85
The new seal installed on the fuselage enables the door to fully close and be air and water tight. The new seals are FAAPMA certified for all Cessna single engine aircraft including the 336 and 337 twins. Cessna Entry Door Seal P/N 05-01610.................................$79.95 Cessna Window Seal P/N 05-01611.................................$49.95 Cessna Baggage Door Seal.......................... P/N 05-01612 ........$49.95 Cessna AFT ENT/CARGO Door Seal ........... P/N 05-01613 ........$89.95 Cessna 207 Front Bag Door Seal ................. P/N 05-01614 ........$49.95
SILICONE GLUE - This pure silicone lubricant will greatly improve the life
and sealing ability of door seals and rubber gaskets. P/N 05-04641 .....................$3.95
118
INTERIORS
Our Baggage Compartments are custom designed and manufactured to provide your aircraft with a sturdy and attractive area for storing baggage, books, charts, etc. If your aircraft is not listed, please send us the old baggage compartment to use as a pattern for a new one. Available in two colors: off-white or olive drab canvas. Note: Complete the part number with color choice. Use -1 for off-white, -2 for olive drab, -3 for tan, or -4 for grey. Baggage Compartments are special order & non-returnable Aircraft Aeronca 7AC Aeronca 11AC Cessna 120/140* Cessna 150* Cessna 172* Cessna 310* Ercoupe Fairchild 24 The Ultimate Door Seal compensates for ill-fitting doors and in-flight door movement, thus keeping a positive seal to reduce the high pitched sound which causes fatigue, anxiety, and progressive hearing loss in pilots and passengers. The Deluxe Electric model features a panel mounted air control valve which is fully automatic in flight with electric power supply module. The Deluxe model features a handheld manometer bulb mounted permanently coiled hose and mounting bracket and panel mounted air flow control valve. The Economy model is the same system as the Deluxe but features a self-contained thumb screw air flow valve mounted on a manometer bulb with storage bracket mounted on the door. Requires no hoses or wires to be run. All systems contain everything needed for installation. All components covered under F.A.A. STCs & PMA. Part No. 09-1726509-1727009-1727509-1728009-1728509-1729009-1729509-17300Price $49.75 $155.95 $158.95 $147.95 $158.95 CALL $128.95 $159.95 Aircraft Luscombe 8A Piper J3 Piper J4 Piper J5 Piper PA12 Stearman Taylorcraft Part No. 09-1730209-1730509-1730709-1731009-1731209-1731509-17317Price $90.75 $45.25 $94.00 $67.75 $107.95 $47.25 $47.25
BAGGAGE COMPARTMENTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SEAT SLINGS
These canvas slings are available in Off-White or Olive Drab. All seat slings include front and rear slings except: Aeronca 65CA.............. 1pc PA-12 ............................ 3 pcs Piper J-3.................... 3 pcs Taylorcraft .......................1 pc PA-22 .......................... 1 pc
Note: Complete Part Number with color. Use -1 for Off White or -2 for Olive Drab.
Aircraft Part No. Price Aeronca 65CA 09-17320- $157.95 Bellanca 09-17322- $84.00 Citabria 09-17325- $83.50 KR-1 & 2 09-17327- $73.00
Aircraft Piper J-3 Piper J-5 Piper PA-12 Piper PA-22 Taylorcraft
Part No. Price 09-17330- $97.00 09-17332- $127.95 09-17335- $126.95 09-17337- $117.95 09-17340- $145.95
1/2 diameter vinyl covered material that provides additional sealing and ornamental edging for the door opening. The windlace is mounted between door post structure and upholstery panels or trim. Install with sheet metal screws. Black color only. P/N 09-00281 ................... $9.90 / ft.
This cover is constructed of a lightweight stiffener panel, 1/2 foam padding and headliner fabric. A flap extends into the back side of the wing root frame and glues in place for a professional finish. P/N 09-17345............. $85.50
CALL FOR A QUOTE FOR YOUR AIRCRAFT 10 elastic mouth, square black vinyl pocket mounted on fiberboard. Includes hardware. ........P/N 09-17415 ..... $73.25 To keep your aircraft components clean from contamination by dust, grime and dirt, install these quality covers made from black vinyl. No mounting hardware included. Cessna 195 ..................P/N 09-17350 ...................... $39.50 Staggerwing .................P/N 09-17352 .................... $103.95 Stearman ......................P/N 09-17355 ...................... $73.50
P/N 09-17410
For adhering all types of rubber weatherstripping to metal. Light colored adhesive, very fast drying, exceptional bonding strength. Can be used for adhering vinyl trim head liners and side panels. 5 oz. tube, #8001............P/N 09-27200 .......$6.25 Adheres firmly to metal and has quick tack necessary for holding pads and linings in place securely. Can also be used for sealing windshields between rubber and 5 oz. tube, #8011 ............. P/N 09-27300 ........$7.85
3M WEATHERSTRIP ADHESIVE
glass.
P/N 09-17365
To keep your aircraft components clean from contamination by dust, grime and dirt, install these quality covers made from black vinyl. No mounting hardware included. Qty Part No. Each 09-17410 Each 09-17357 Pair 09-17360 Each 09-17375 Price $19.75 $40.75 $59.50 $16.50
This general purpose adhesive is used for bonding trim fabrics, floor mats, and rugs. Features quick tacking quality, does not bleed through fabric, and remains rubbery and flexible. Doesnt dry hard. Excellent for upholstery repairs. 5 oz. tube, #8031...........P/N 09-27210 .......$9.50
Aircraft Description PA-22 1 Pc. Control Column Boot PA-25 Gate Control Rod Boot J-3 Piper Shock Boots PA-25 Gate Control Rod Boot PA-25, SN25-2000 Shock Strut Boots, pair to -4171 Aircraft Description Aeronca 7AC Joy Stick Covers Cessna172 Steering Linkage (also fits 182) Covers Citabria Interior Boots Beech Bonanza Gear Boots for Main Gear Dust Boot for Retractor Beech Bonanza Nose Gear
Prices Subject to Change Without Notice
This fast drying adhesive develops strength very quickly. It has excellent heat resistance; temperature performance is from -5 to 300F. Meets specification requirements of MIL-A-1154C. Bonds neoprene, reclaim, SB-R, and butyl rubber to metal, wood, most plastics, and many other products. #1300L Qt Can .P/N 09-27220 ..............$39.75
AERO-SEAL CEMENT
Designed for door seals and moldings. Adheres rubber to wood, other rubber, fiberglass or metal. 4 oz. brush-top container. P/N 05-00955 ............... $12.50
119
HEADLINERS
Wool Fabrics Wool headlining fabrics are available in Off White, Tan or Grey. The fit is in the quality of the workmanship, therefore it can be made to conform to almost any curve. Mellohide VFR Mellohide VFR vinyl has a unique four-way stretch which easily eliminates tension wrinkles and produces a smooth, professional finish. Backing and facing aremildrew resistant. All materials exceed FAR 23-853 P/N 09-02004 ......................... FREE
This is a quality versatile wool headlining fabric. Wrinkles can be removed by applying water in a fine mist then using heat, such as a hair dryer, allowing wool to shrink. This gives a nice tight fit. Colors: Offwhite, tan and gray. Complete P/N with color choice using (-2) for Off white, (-3) for tan, or (-4) for gray. 54 inches wide; sold by the yard. P/N 09-17566-X.......... $29.25/yd.
HEADLINER WOOL
Headliner, rubber & gasket adhesive. Quart ................ P/N 09-17570 ................... $33.75
3M HEADLINER CEMENT
Vinyl outside, backed with 1/4 closed-cell insulation. If your aircraft is not listed, please send us your current firewall set to use as a pattern. 1-Piece Bulkhead Firewall Aircraft Aeronca 11AC Cessna 120/140 Piper PA20/22 Piper PA18 Piper PA28/140 Part No. 09-35910 09-35915 09-35925 09-35930 09-35935 Price $128.95 $128.95 $128.95 $128.95 $128.95
FIREWALL SETS
A high temp high strength contact type adhesive. Bonds metal, foam, decorative laminates, fabrics, headliners. Variable width spray pattern. Meets Fed. Spec. MMM-A-130B. 16.5 Oz. Can.............P/N 09-42652 ...... $7.60 ea.
Bulkhead and wrap-around pad 3 piece set. P/N 09-35950 ...........$216.95 Please specify model. Also specify if 8A is with or without dishpan. If with dishpan, specify if round or oblong. Standard ........................ P/N 09-35940 ...........$128.95 With Dishpan ................ P/N 09-35945 ...........$128.95
CITABRIA
Unique four-way stretch that easily eliminates tension wrinkles, producing a smooth professional finish. Backing and facing are mildew resistant. 54 width. Color: Off white. P/N 09-17564 ...............$23.75/yd. All wool, 1/4 thick felt for paddings. Firm but resilient construction for many aircraft applications. Gray/ brown mix. NOTE: Sold in Full 36 Width only. Sold per foot. P/N 09-31600 ..........$13.75/Lineal Ft.
FELT
LUSCOMBE 8A & 8E
82 CSK Washer Size 4 ..... P/N 04-00393 ....... $0.06 Size 6 .....P/N 04-00394 ...... $0.05 82 Oval Head Screw 4x1/2 - A-OV.... P/N O4X8 ..... $0.03 6x1/2 - A-OV.... P/N O6X8 ... $0.04 6x3/3 -A-OV..... P/N O6X12 ... $0.04 6x1 ..........P/N O6X16 ......... .$0.05 Snap Studs - Males snaps attached to self-tapping phillips head screws. For canopies #7 x 3/8 ............... P/N 04-01520 .................... .$0.30 #7 x 5/8 ............... P/N 13-03296 .................... .$0.09
UPHOLSTERY HARDWARE
CARGO NETTING POCKET MESH - MSG mesh products are developed with customers to ensure the highest quality standard in both product design and longevity. Black 50 wide ............P/N 09-00462 .......$19.95 / yd.
120
3M Polyurethane Protective Tape 8674 is made from a tough abrasion resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. it is formulated for resistance to ultraviolet light. Polyurethane Protective Tape 8674 provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. It can be installed in a minimum amount of time with simple tools. It can be painted or applied over painted surfaces. Polyurethane Protective Tape 8674 is constructed with a long-aging, solvent resistant, pressure sensitive acrylic adhesivethat is protected with an easy release poly liner. This tape is a transparent film and available in 2 liner configuration: Protective Tape 8674 has a single poly liner on the adhesive side. Protective Tape 8674DL has dual liners, one on each side of the tape. The adhesive side has a poly liner, and the liner on the top of the urethane tape is polyester. W L Color Clear Clear Clear Clear Clear Clear Clear Clear Clear Description 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape 3M 8674 Lead Edge Tape Part No. Price
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
09-01642 $19.50 09-00847 $63.75 09-01643 $37.75 09-00813 $139.50 09-01644 $55.60 09-00849 $179.50 09-01645 $74.75 09-00814 $260.95 09-00850 $364.95
3M Polyurethane Protective Boots SJ8665 are pre-formed and used extensively in private, commercial and military aircraft to fit the complex curvatures of a variety of applications. These boots are designed to help provide long lasting protection of randomes, wing and stabilizer tips, landing gear pods, composite parts, and other portions of aircraft from rain, moisture ingression, UV light, insects, sand, sleet, snow, and most other airborne particle erosion damage. The boots are part of a 3M family of high performance surface protection products available for various aerospace applications worldwide. Boot Application 3M P/N Our P/N Aero Commander 500-1000, Radome FP-20 09-00854 Aerostar 601 P Radome FP-127 09-00856 Beechcraft Baron Norton Radom (Honeycomb) FP-55 09-00857 Baron Non-Honeycomb (#58-410015-613) FP-68 09-00858 Baron Honeycomb Nose FP-69 09-00859 (#58-410017-603) Beech/Mitsubishi Diamond Radome FP-84 09-00860 Duchess Radome FP-129 09-00861 90,100,200,1300,1900,Most King Air, 65/ FP-5 09-00863 A65,70,80, A80,B80,U-8F, U-21A 99 FP-35 09-00864 1900& King Air Series Vertical Fairing Dome FP-173 09-00865 Bombardier Learjet 23,24,25,Radome (PN2411241-1) FP-7-1 09-00866 Learjet 33, 36 Wing Tip FP-13-1 09-00867 Learjet M-45 Navigational Lens Assy FP-195-1 09-00868 Learjet M-45 Radome FP-174-1 09-00869 Learjet 50, 55, 60, (PN5411212-1) Price $282.95 $338.95 $337.95 $303.95 $384.95 $385.95 $195.95 $510.00 $201.95 $232.95 $199.95 $195.95 $266.95 $266.95 Boot Application 3M P/N Cessna 208 Wing Mounted Radome FP-34 208 Prop Spinner FP-87 335,340,340A,401-421 FP-25 Radome Long Nose 310K-Q w/Norton Rad, 320, 310R (#4096) FP-90 310q w/Norton Radome PN4131 FP-130 310R w/Norton Radome PN4096 FP-114 Citation S, I, II, IV, V FP-29 Citation II, IV, VII FP-70 210 Centurian,182,206,337 w/Wing Pod FP-126 425-441 Series Radome FP-41 Piper Aztec (Turbo) C non Coleman/Apache FP-143 Aztec E-F Radome FP-136 Cheyenne I, PA31P, Mojave, PA31T1/3, FP-12 etc. Cheyenne II Cheyenne III, IV Navajo (except PA31P) Seneca Our P/N Price
09-00871 $281.95 09-00872 $439.95 09-00873 $256.95 09-00875 09-00876 09-00877 09-00878 09-00879 09-00880 09-00881 $263.95 $299.95 $299.95 $299.00 $439.95 $248.95 $284.95
FP-4 09-00886 $383.95 FP-24 09-00887 $199.95 FP-23 09-00888 $269.95 FP-54 09-00889 $302.95
A pre-mixed, water-based solution for applying 3M Polyurethane Protective Tape and Boots. Solution is provided pre-mixed in a ready to use squirt bottles. Allows wide width and contoured performed boots to be easily installed. P/N 06-00604 ....................... $41.50
06-00605
Tape Adhesion Promoter 86A is intended for use in enhancement of 3M Polyurethane Protective Tape adhesion levels to certain types of surfaces. It is most effective when used over polyurethane 05-03479 enamel surfaces. ..........P/N 06-00605 ....... $59.70 Adhesion Promoter Cloth (Sold Each) ..........P/N 05-03479 ....... $16.75
3M TAPE & RESIDUE REMOVE - Use for removal of polyurethane protective tapes, neoprene rubber and other tape residues; such as carpet tape from interior cabin composite surfaces. 16 Ounce.................................. P/N 05-02682 ..........................$27.80 Gallon ....................................... P/N 05-02683............................$96.75
121
Designed to help protect light aircraft from the damaging effects of rain, insects, sand, snow and sleet. A tough durable, protective tape for exposed surfaces. 3M #8672 Polyurethane Protective Tape is designed to help protect the leading edges of aircraft wings, struts, and horizontal and vertical stabilizers from airborne particle damage. Versions of this tape are used extensively for surface protection in both military and commercial aircraft applications. May be applied to clean metal or to commonly used aircraft paints over metal or fabric. Not to be used on props, helicopter rotors or balanced surfaces such as elevators or ailerons. Clear in color. Sold in full rolls only. 2 wide ........... P/N 09-20140.........$133.95 4 wide ........... P/N 09-20145.........$268.95 6 wide ........... P/N 09-20110.........$193.50 An excellent canopy seal which helps stop vibration. Recommended for use on Quickie. Size: 3/8 thick x 1/2 wide x 10 ft. P/N 05-01100.............$2.25 A general-purpose gray cloth tape with good adhesive qualities. 2 x 60 Yd. Roll ................ P/N 09-30900 .....$11.50
This patented slip-resistant material is an excellent alternative to black Wing Walk which has been used on aircraft for many years. This material is nearly clear (slightly opaque) and has an adhesive backing that requires heat or 1500 lbs. of pull to remove it from the surface on which it is applied. Imagine how much better a newly painted aircraft can look with a clear material which does not alter the paint design. The material is impervious to chemicals, compounds, and water and will expand and contract with the metal or fabric. Surface roughness of the material is about the same as standard black Wing Walk. Furnished in 16 x 30 sheets. .............. P/N 09-31810 ............... $32.85 Ea. The non-skid adhesive tape is excellent for wing walk applications. The clear is perfect for pilots wishing their step areas to blend in, not stand out. This tape meets all applicable Mil Specs and has superior adhesion qualities. Sold by linear foot. 24 Wide Clear................................P/N 09-31685 ..........................$4.90 6 Wide Clear..................................P/N 09-31645 ..........................$1.35 24 Wide White ...............................P/N 09-31680 ........................$10.00 Developed exclusively for Aircraft Door Seals by a major chemical company, this phenomenal new wing walk coating reduces the chance of slipping when climbing up on the wing. Unlike the mundane wing walk coating found on most aircraft, ULTRA WING WALK is a fast-drying polyurethane-based semi-gloss black coating with fine particles of rubber that adds class to any plane. ................P/N 05-04366 ...........$38.85
MD FOAM TAPE
3M DUCT TAPE
Armak general or 3M purpose crepe masking tape. Long shelf life. 1/4 x 60 yd. Roll .................... P/N 09-20101....... $1.53 ea. 1 x 60 Yd. Roll ...................... P/N 09-20100....... $2.50 ea. Has many uses in aircraft maintenance work. Strip over sharp corners to protect fabric. Strips under doped fabric will prevent fabric from sticking to parts. Pressuresensitive adhesive backing. Easily applied, easily removed.1 x 60 Yd. Roll ... P/N 09-17100.............$9.75 A pressure-sensitive transparent acetate film tape reinforced with glass strands. Possesses high tensile strength (375 lbs./inch width) and good impact strength. Especially effective for carton sealing applications. #RG-2A, 3/4 x 60 Yd. Roll ................... P/N 09-31200.............$2.95 A pressure-sensitive transparent polypropylene plastic tape for packaging & edging. Outstanding stretchiness/conformability. Waterproof, flame, abrasion and solvent resistant. #371, 2 x 110 Yd. Roll ......................... P/N 09-31300.............$1.93 Rescue Tape is a self-fusing silicone repair product with infinite uses. Most versatile and easy to use emergency repair product available. You can repair leaks on plumbing and hoses in a flash, use for electrical wiring or as shrink wrap, wrap tool handles, and much, much more. Incredible 700 PSI Tensile Strength, Insulates 8,000 Volts per layer, Withstands 500 F Degrees of heat! (260 C) ~ Remains flexible to -85 F! (-60 C), Creates a Permanent Air-Tight, Water-Tight Seal in seconds, Resists Fuels, Oils, Acids, Solvents, Salt Water, Road Salt, UV Rays. Description Color Part No. Price Rescue Tape Standard Roll 1x12x.020 Red 01-00989 $9.95 Rescue Tape Standard Roll 1x12x.020 Black 01-00990 $9.95 Rescue Tape Standard Roll 1x12x.020 Clear 01-00991 $9.95 Rescue Tape Industrial Roll 2x36x.030 Black 01-00992 $39.95 Rescue Tape Industrial Roll 2x36x.030 Red 01-00993 $39.95 Pliobond #20 is a viscous, quick setting highly versatile adhesive. Bonds metal; wood, plastics, fabrics; ceramics, glass, vulcanized rubber, paper, leather and concrete. Thin with MEK. 1/2 Pt. Brush Top Can . P/N 09-28000....$8.50 Pt. Can .......................... P/N 09-28100..$13.85 Qt. Can .......................... P/N 09-28200..$23.75 Discount Less 15% on 12 (Assorted)
MASKING TAPE
Black Wing Walk Compound is a special grit mixed into a tough black enamel material. Used to form non-slip surfaces on airplane wing walks. Apply with a coarse brush directly over regular finish after thoroughly cleaning the surface, and breaking the glaze if the surface is old. Thin with toluene as required. Conforms to MIL-W-5044. Randolph X-1567. Qt. ................... P/N X-1567-QT ...............$22.00
CLOTH TAPE
aircraftPliobond
adhesive
A durable, mineral coated, non-slip fabric for wing walks. Waterproof, weatherproof and unaffected by vibrations, heat, cold, gasoline or oil. Assures safe footing. Pressuresensitive backing should have additional coating of Pliobond to assure adhesion for applications. Sold by lineal foot. 12 Width (3M) ......... P/N 09-32250........$4.95 /Ft. 1/2 pt. ....................... P/N 09-28000.............. $8.50 1 pt. .......................... P/N 09-28100............ $13.85 1 qt. .......................... P/N 09-28200............ $23.75
POLYPROPYLENE TAPE
RESCUE TAPE
High-friction, fine-resilient textured, slip-resistant material. Reverse side coated with pressure-sensitive adhesive protected by a removable liner. Good for wet, barefoot traffic areas. Clear vinyl, light duty, 12 inches wide. Sold by the linear foot. 12 wide Clear .................................P/N 09-31650 ........................ $5.25 6 wide White...................................P/N 09-31655 ........................ $2.75 12 wide White.................................P/N 09-31660 ........................ $5.25 6 wide Black ...................................P/N 09-31665 ........................ $2.80 24 wide Black ................................P/N 09-31675 ........................ $9.95 RAC wing walks are not made from the usual, sandpaper-like material, which can decompose and scratch both the wing surface and your knees. Instead, they use a low profile, synthetic rubber, that combines a comfortable feel with good gripping power.The RAC wing walk comes pre-cut to 26 1/2 x 9 1/2. Installation is easy with the aggressive, self-adhering backing. Each wing walk comes rolled in its own, 4x4x10 box and installation instructions are also provided with each box. Black P/N 09-28210 ................................$21.65 ea.
3M SAFETY-WALK TAPE
PLIOBOND
122
AN900 GASKETS
Discount Less 20% For 100 Per Size 144 piece kit of copper crush washers in common sizes. Complete with durable plastic case with dividers and size chart. P/N 05-02220............$203.95 AN901 tube connection seals are temper. AN901 Tube Dash No. O.D. -4A 1/4 -5A 5/16 -6A 3/8
AN901 O-RINGS
fabricated from type1100 alum., H14 Price AN901 Tube Each Dash No. O.D. $0.98 -8A 1/2 $0.35 -10A 5/8 $0.31 -12A 1-1/16 Price Each $0.26 $0.95 $1.41
O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions and reducing friction and wear on moving parts. The use of O-rings as gaskets or static seals permits metal-to-metal contact and allows almost unlimited pressures under extreme vibration. All 0-rings should be lubricated before installation and constant lubrication should be provided for running seals to avoid excessive wear. Avoid sharp edges, threads, and cross-drilled ports over or through which rings must be installed. AN6227B and AN6230B 0-rings are manufactured to Spec. MIL-P 25732 for use in hydraulic systems using MIL-0-5606 hydraulic oils. MS28778 O-rings meet Spec. MIL-P-5510A and are suitable for MIL-0-5606 hydraulic fluid at 160 F. AN6227B Dimensions (In.) Price AN6227B Dimensions (In.) Price Dash# W I.D. O.D. Each Dash# W I.D. O.D. Each 1 1/16 1/8 1/4 $0.23 24 1/8 1-5/16 1-9/16 $0.38 2 1/16 5/32 9/32 $0.20 25 1/8 1-3/8 1-5/8 $0.38 3 1/16 3/16 5/16 $0.23 26 1/8 1-7/16 1-11/16 $0.40 4 1/16 7/32 11/32 $0.22 27 1/8 1-1/2 1-3/4 $0.55 5 1/16 1/4 3/8 $0.20 28 3/16 1-1/2 1-7/8 $0.56 6 1/16 5/16 7/16 $0.21 29 3/16 1-5/8 2 $0.62 7 1/16 3/8 1/2 $0.23 30 3/16 1-3/4 2-1/8 $0.86 8 3/32 3/8 9/16 $0.21 31 3/16 1-7/8 2-1/4 $0.87 9 3/32 7/16 5/8 $0.25 32 3/16 2 2-3/8 $1.07 10 3/32 1/2 11/16 $0.23 33 3/16 2-1/8 2-1/2 $0.99 11 3/32 9/16 3/4 $0.24 34 3/16 2-1/4 2-5/8 $1.02 12 3/32 5/8 13/16 $0.24 35 3/16 2-3/8 2-3/4 $0.89 13 3/32 11/16 7/8 $0.20 36 3/16 2-1/2 2-7/8 $1.13 14 3/32 3/4 15/16 $0.20 37 3/16 2-5/8 3 --15 1/8 3/4 1 $0.38 38 3/16 2-3/4 3-1/8 $1.18 16 1/8 13/16 1-1/16 $0.29 39 3/16 2-7/8 3-1/4 $1.21 17 1/8 7/8 1-1/8 $0.30 40 3/16 3 3-3/8 $1.56 18 1/8 15/16 1-3/16 $0.39 41 3/16 3-1/8 3-1/2 $1.69 19 1/8 1 1-1/4 $0.38 42 3/16 3-1/4 3-5/8 $1.55 20 1/8 1-1/16 1-5/16 $0.35 43 3/16 3-3/8 3-3/4 $1.30 21 1/8 1-1/8 1-3/8 $0.35 44 3/16 3-1/2 3-7/8 $1.93 22 1/8 1-3/16 1-7/16 $0.43 45 3/16 3-5/8 4 $1.92 46 3/16 3-3/4 4-1/8 $1.38 23 1/8 1-1/4 1-1/2 $0.53
See www.aircraftspruce.com for MS28775-026 thru MS28755-131 O-Rings.
O-RINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN6230B Dimensions (In.) Price AN6230B Dimensions (In.) Dash # W I.D. O.D. Each Dash # W I.D. O.D. 1 1/8 1-5/8 1-7/8 $0.64 6 1/8 2-1/4 2-1/2 2 1/8 1-3/4 2 $0.70 7 1/8 2-3/8 2-5/8 3 1/8 1-7/8 2-1/8 $0.73 8 1/8 2-1/2 2-3/4 4 1/8 2 2-1/4 $0.59 9 1/8 2-5/8 2-7/8 5 1/8 2-1/8 2-3/8 $0.85 10 1/8 2-3/4 3 See Page 911 for AN/MS O-Ring Equivalent Chart.
This AN/MS O-Ring Kit includes over 382 O-rings made of Nitrile Buna N 70 duro material. These rings have a temperature range of -6 to 275F and are for use with petroleum oils and fluids. Size range in kit is 0 through 30.(O-Ring Set An6227B-1, -30) P/N 05-02210 ... $85.00 70 Duro Nitrile 382 O rings Great kit for the homebuilder Sizes: -06 to -32 P/N 13-02804 ...........$24.95
These MS29513 series O-rings are resistant to fuel and are ideal for applications such as fuel injection connections and primers. A small amount of fuel proof grease applied to these O-rings helps the installation and operation of primers. Not resistant to automotive fuels.
Part Number MS29513-005 MS29513-006 MS29513-007 MS29513-008 MS29513-009 MS29513-010 MS29513-011 MS29513-012 MS29513-110 MS29513-111 MS29513-112 MS29513-113 MS29513-114 MS29513-115 MS29513-116 MS29513-337 I.D. 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 3/8 7/16 1/2 9/16 5/8 11/16 3/4 3 Nominal Size O.D. 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 3-3/8 W 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/16 Price Each $0.29 $0.24 $0.23 $0.24 $0.23 $0.20 $0.22 $0.26 $0.25 $0.25 $0.27 $0.29 $0.21 $0.29 $0.29 $0.97
123
These high quality aircraft wires and terminals are manufactured in Scotland by Bruntons Aero Products who first originated streamline wires in 1909. They feature the stronger rolled threads and are available in high polish or satin finish. Material is 316 high tensile stainless steel. Wires are also available in BSF or metric threads. Special wires with combination streamline and round section commonly used for biplane roll wires or seaplane float installations are available. Wires are manufactured to AN specifications and are 100% proof loaded. Wires ordered with terminal assemblies are supplied assembled. Quality certifications are provided with all orders. Aircraft tie rods carry tensile loads for bracing wings, tail assemblies as well as float installations. They may be ordered separately or with terminal assemblies (AN665 terminal, clevis pin, jam nut, cotter pin). AN specs define thread lengths as well as a fixed difference in length between rod length and pin center length (K). Order pin center lengths ONLY when AN665 terminals are used on both ends of the wire. All other installations must order rod length. Due to fluctuations in international exchange rates, the prices of Brunton tie rods are subject to change. We guarantee the lowest prices and fastest delivery on all Brunton tie rods. Request current pricing. Allow 8-10 weeks for delivery of Brunton tie rods.
Spring-Fast Composite Grommet Edging covers sharp edges of panels that come in contact with witre and cables and mechanically lock on indefinitely with finger pressure in only seconds per foot. They provide a significant time reduction in assemblies. A long-term reliability solution that replaces nylon caterpillar plastic gromments and associated solvents, adhesives, and ancillary materials to protect critical equipment from failure due to wire chaffing. Spring-Fast Grommet Edging is approved by the FAA and U.S. Department of Defense per NASM 22529/a and NASM 22529/2 for all aircraft applications. Meets FAR 25.853 for flammability and MIL 1344 for shock and vibration. Spring-Fast is available for 8 different sheet thickness ranges from 0.025 to 0.260 and can be purchased in either 10 piece packs of 12.75 long pieces, or 25 or 100-foot reels. Use Spring-Fast BAP and SL series for flanged lightning hole and three-axis contours. The BAP Series Flexi-Grommet is perfect for roll formed edges and small lightening holes. Where wires are routed in the same plain as the sheet metal, the Spring-Fast SL Series provides a trim characteristic for all edges with or without cabling nearby. Spring-Fast is used in a wide variety of tions: Lightening Holes Seating Fuselage Tail Sections Ferrules Electrical Power Centers IFE (In-Flight Entertainment) Ground Control EAU (Electrical Avionic Units) APU (Auxiliary Power Units) aviation and aerospace applica Wing Sections Intercostals Avionics Tactical Satellite Emulators Navigation Systems Racks Bulkheads Air Traffic Control PSU (Personal Safety Units)
Grommet seals have many applications. In race cars they serve to keep unwanted smoke and fumes from entering the drivers area while protecting lines from chafing and abrading on rough surfaces. In hot rods and custom car applications, they provide the perfect finishing touch to all through panel installations. Wiring, fuel and oil lines, air and liquid hoses, and all other lines that make up your rod or custom, can make an otherwise detailed installation look unfinished. Seals-It grommet seals add the well-organized, professional appearance you want. Grommet seals also have many other applications including: marine, commercial equipment, motor homes, etc. Grommet Seal 2 Hole Series Grommet Seal 1 Hole Series Dia. Hole P/N Price Dia. Hole P/N Price 1.5 n/a 05-02493 $12.70 2.0 n/a 05-02494 $12.80 All Rubber Blank 05-02510 $42.50 5-1/4 3.0 n/a 05-02495 $15.90 3.0 .250 05-02496 $15.95 1-1/2 2.125 05-02511 $42.50 3.0 .375 05-02497 $15.95 3.0 .500 05-02498 $15.95 2 Hole Blank 5-1/4 05-02512 $42.50 3.0 .625 05-02499 $15.95 2 Hole Blank 5-1/4 05-2519 $42.50 3.0 .750 05-02501 $15.90 05-02520 $42.50 2.750 1/4 3.0 .950 05-02502 $15.90 05-02521 $42.50 2.750 3/8 3.0 1.180 05-02503 $15.95 05-02522 $42.50 2.750 1/2 4.0 n/a 05-02504 $26.20 4.0 1.00 05-02505 $35.00 05-02523 $42.50 2.750 5/8 4.0 1.80 05-02506 $26.20 05-02524 $42.50 2.750 3/4 4.5 1.50 05-02507 $44.70 05-02525 $42.50 2.750 1 4.5 2.12 05-02508 $51.60 6.0 n/a 05-02509 $44.50 05-02526 $43.10 3.625 .700
MFG Sheet Package Our Price Number Thickness Size P/N Ea. M22529/2-1R .025-.036 Per Foot 05-00673 $5.50 M22529/2-1C-10PK .025-.036 10pcs/12.75l 05-00674 $59.85 M22529/2-2R .036-.063 Per Foot 05-00675 $5.50 M22529/2-2C-10PK .036-.063 10pcs/12.75l 05-00676 $59.85 M22529/2-3R .059-.074 Per Foot 05-00677 $5.50 M22529/2-3C-10PK .059-.074 10pcs/12.75l 05-00678 $59.85 M22529/2-4R .070-.093 Per Foot 05-00679 $5.50 M22529/2-4C-10PK .070-.093 10pcs/12.75l 05-00680 $75.50 M22529/2-5R .090-.111 Per Foot 05-00681 $5.75 M22529/2-5C-10PK .090-.111 10pcs/12.75l 05-00682 $75.50 M22529/2-6R .105-.134 Per Foot 05-00683 $6.90 M22529/2-6C-10PK .105-.134 10pcs/12.75l 05-00684 $75.50 M22529/2-7R .178-.198 Per Foot 05-00685 $6.50 M22529/2-7C-10PK .178-.198 10pcs/12.75l 05-00687 $86.75 M22529/2-8R .240-.260 Per Foot 05-00688 $7.90 M22529/2-8C-10PK .240-.260 10pcs/12.75l 05-00690 $87.75 See aircraftspruce.com for our complete selection of grommet edging 25ft. rolls are 20% discount off per foot prices
124
Manufactured of 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. For welding to steel tubing or riveting to aluminum tubing. All sizes fit inside of 3/8 O.D. x .035 wall steel tubing. Current Part No. MS27976-1 MS27976-2 MS27976-3 MS27976-4 Old Part No. AN481-1P AN481-2P AN481-3P AN481-4P Fork Width Clevis Pin Hole Dia. Overall Inside 1/4 1/2 17/64 1/4 5/16 9/64 3/16 1/2 17/64 3/16 5/16 9/64 Price Each $18.70 $17.75 $19.30 $15.70
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are internally threaded 1/4-28 to fit threaded 1/4 dia. rod. Used for engine controls. For experimental aircraft only. Current Part No. MS27975-1 MS27975-2 MS27975-3 MS27975-4 AN486-1032 Old Part No. AN486-1P AN486-2P AN486-3P AN486-4P Special Fork Width Clevis Pin Hole Dia. Overall Inside 1/4 1/2 17/64 1/4 5/16 9/64 3/16 1/2 17/64 3/16 5/16 9/64 3/16 7/16 3/16 Price Each $15.90 $15.75 $16.90 $16.90 $9.75
*Replaces AN115 - 16. DISCOUNT: Less 10% for 12, 15% for 25, 20% for 50 or more. May be assorted.
Part No MS51844-42 MS51844-43 MS51844-44 MS51844-45 MS51844-46 MS51844-22 MS51844-23 MS51844-24 MS51844-25 MS51844-26
Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicopress hand squeezers. Provides a bond that is even stronger than a standard splice. 18 Series sleeves are plain copper and 28 Series sleeves are zinc plated. Price Nicopress Cable Dia. Matl./Finish Ref. Each 100 18-1-C 1/16 Copper/Plain $0.13 $11.05 18-2-G 3/32 Copper/Plain $0.19 $16.15 18-3-M 1/8 Copper/Plain $0.38 $32.30 18-4-P 5/32 Copper/Plain $0.59 $50.15 18-6-X 3/16 Copper/Plain $1.14 $96.90 28-1-C 1/16 Copper/Zinc $0.11 $8.80 28-2-G 3/32 Copper/Zinc $0.19 $15.20 28-3-M 1/8 Copper/Zinc $0.52 $41.60 28-4-P 5/32 Copper/Zinc $0.58 $46.40 28-6-X 3/16 Copper/Zinc $1.07 $85.60
Manufactured of 4130 steel, heat-treated and cadmium plated. Minimum tensile strength 125,000 PSI. For welding to steel tubing or riveting to aluminum tubing. Part Thread Used With Price Number Size Tube Size Each AN490HT5P 1/4-28 5/16x.035 $19.90 AN490HT6P 1/4-28 3/8x.035 $13.75 AN490HT8P 1/4-28 1/2x.035 $14.65 AN490HT10P 5/16-24 5.8x.035 $17.25 AN490HT11P 5/16-24 3/4x.035 $13.75 AN490HT14P 3/8-24 3/4 x .035 $16.90 AN490HT15P 5/16-24 1/2x.058 $18.40 AN490HT16P 3/8-24 1/2x.058 $22.50
These copper stop sleeves are used on the ends of bare cables. Cable Dia. 1/16 3/32 1/8 5/32 3/16 Model No. ST2-2 ST2-3 ST2-4 ST2-5 ST2-6 Part No. 04-00899 04-00901 04-00902 04-00903 04-02061 Price Ea. $0.24 $0.35 $0.37 $0.55 $0.47
STOP SLEEVES
Permanently lubricated in-line swivel for rod end bearing or clevis fork. For applications where rod needs to swivel in a rotary motion to reduce binding while maintaining a straight line to control or stabilizer rod. For use on 1/2 rod and will fit 1/4 x 28 female rod end or clevis fork. P/N 05-01021 .................... $23.85 NAS287-25-3 3/32 cable size............. P/N 04-02064 ...................$13.95 NAS287-25-2 1/16 cable size............. P/N 04-02032 ...................$11.75 NAS287-35-4 1/8 cable size............... P/N 04-02065 ...................$15.75
These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a 6-40 lefthand thread. AN665-34R has a 1/4-28 right-hand thread. Order Terminal Assemblies if locknut, clevis pin, and cotter pin are required along with terminal. Otherwise, only terminals are supplied. *Note - Cad Plated Terminals are no longer being manufactured due to enviromental reasons. Once the cad plated stock is depleted the zinc plated terminals will be shipped. Please note that we can not guarantee cad plated terminals will be received. Dash No. Fork Pin AN665 Rt. AN665 Lt. Thrd. Inside Sgth. Hole only Price only Price Right Left Size Width (Lbs.) Dia. Ea. Ea. Hand Hand -10R -10L 6-40 .190 .109 1200 $10.50 $10.50 -21R -21L 10-32 .190 .150 2400 $11.75 $11.75 -34R -34L 1/4-28 .250 .203 4200 $19.95 $18.85 -46R -46L 5/16-24 .313 .203 4600 $27.50 $27.00 -61R -61L 5/16-24 .375 .203 6900 $29.85 $29.85 -80R -80L 3/8-24 .375 .266 10000 $39.90 $39.90 These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin. Description Part No. Price Description Part No. Price AN665-10R 05-02300 $11.00 AN665-10L 05-02400 $11.50 AN665-21R 05-02500 $11.90 AN665-21L 05-02600 $12.25 AN665-34R 05-02700 $19.75 AN665-34L 05-02800 $19.25 AN665-46R 05-02900 $27.75 AN665-46L 05-03000 $27.75 AN665-61R 05-03100 $29.65 AN665-61L 05-03200 $29.65 AN665-80R 05-03300 $42.75 AN665-80L 05-03400 $42.50
125
CABLE TERMINALS
The finest and best means of attaching fittings to cable. Properly swaged to the cable, these terminals will maintain the minimum rated breaking strength of that cable. These terminals are made of stainless steel alloy having the best swaging and corrosion resistant properties and have a polished finish.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Meet all requirements for Boeings BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fittings. All balls are manufactured from stainless steel as specified in MIL-DTL 781 and are certified to the appropriate standard(s). Dash Cable Sphere Strength Price No. Dia. Dia. Lbs. 2 1/16 .188 80 $0.66 3 3/32 .250 735 $0.84 4 1/8 .312 1200 $1.16 5 5/32 .375 1680 $1.63 6 3/16 .437 2520 $1.88
Breaking Pin Dash Cable Strength Hole No. Dia. Lbs. Dia. 2 1/16 480 .190 3 3/32 920 .190 4 1/8 2000 .190 5 5/32 2800 .250 6 3/16 4200 .313
Fork Width Price G .093 $7.75 .108 $8.50 .195 $11.00 .202 $13.85 .260 $16.75
Dash No. Short -S2RH -S2LH -S3RH -S3LH -S4RH -S4LH -S5RH -S5LH -S6RH -S6LH
Price Dash No. Each Long $4.60 -L2RH $4.90 -L2LH $5.45 -L3RH $5.65 -L3LH $5.98 -L4RH $5.90 -L4LH $6.25 -L5RH $6.55 -L5LH $6.80 -L6RH $7.50 -L6LH
Price Each $5.90 $6.45 $6.40 $5.75 $6.95 $7.60 $6.95 $7.25 $9.85 $9.50
Cable Thread Min. Breaking Dia. Size Strength (lbs) 1/16 6-40 480 920 2000 2800 4200
Part No. SA361-2 SA361-3 SA361-4 SA361-5 SA361-6 SA362-2 SA362-3 SA362-4 SA362-5 SA362-6 Cable 1/16 3/32 1/8 5/32 3/16 1/16 3/32 1/8 5/32 3/16
* Universally replaces the canceled AN669 & NAS650 parts identified by the same dash no. * AN100 thimble not included. ** For short barrels listed above. Use two per assembly.
Hole Dia .188 .188 .188 .250 .313 .188 .188 .188 .250 .313
Width .088 .103 .190 .197 .255 .093 .108 .195 .096 .125
Price $3.70 $4.20 $4.90 $9.75 $12.00 $2.60 $2.75 $3.75 $7.25 $9.25
Discounts: All Items This Section: Less 10% For 12 Ea. 15% On 50 Or More (Per Size)
126
7 X 7 FLEXIBLE CONTROL CABLE - Has seven strands of seven wires each. Used for control purposes where extreme flexibility is not required but where abrasion is a factor. 7 X 19 FLEXIBLE CONTROL CABLE - Has seven strands of 19 wires each. Its greater metallic area makes it stronger than 7 x 7 cable. Because of its fine wires the best service is obtained where abrasion is not too severe. These same wires, however, make it flexible to meet severe bending. 1 X 19 NON-FLEXIBLE CABLE - Is one strand of 19 wires. It has more metallic area than 7 x 7 or 7 x 19 constructions which makes it the strongest but also the least flexible. 1 x 19 is generally used for bracing purposes, drag and anti-drag wires. It is often used with swage type terminals. The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially better fatigue life than non-lubricated commercial cable. Aircraft cable requires extensive extra testing, documentation, certification to meet military specifications. Aircraft Spruce obtains its aircraft cable from domestic sources and the cable is certified to MIL Spec MIL, W-83420 and QPL Certified. These FAA-PMA approved cable assemblies are available in stainless or galvanized cable and are constructed of highest quality U.S. made materials. All components are fully traceable and each assembly is load tested and length stabilized. Over 2000 cable assemblies in stock. Custom cable assemblies can be fabricated to your specification. AS0510105 Series for Cessna 170, 172, 180, 182, and 185 AS0400107 Series for Cessna 150, and 152 AS1660300 Series for Cessna 188 AS62701 Series for Piper PA28, PA32, and PA34 ACA Series for Schweizer G-164 Call the Cessna/Piper parts specialist at 1-877-4SPRUCE with your Cessna or Piper cable assembly part number for pricing or for assistance in determining the part number you require for your aircraft.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CABLE FAIRLEADS
Nylon construction for external use. Two halves with retaining clip. 3/4O.D. x 3/4L P/N 05-05500 $2.75 Set 3/4O.D. x 1 L P/N 05-05600 $2.45 Set
Conforms to AD. 81-25-05. The heavy-duty, high tensile strength strut fork has rolled threads, an improved alloy with heartier design for added strength, and a permanent indentification mark to provide assurance of conformity for ease in field installation. Forks require a five year inspection per A.D. 93-10-06. FAA/PMA. J-3 & PA-11. Replacement for 13770-00. Includes bolt, nut, cotter pin & jam nut. Measures 5/16" bolt hole. Measures 7/16" x 20 thread NF3. ............ P/N 05-06000 ......$82.75 FAA/PMA. J-5 & PA-12, 14, 18, 20 & 22. Replacement for 4481-02. Includes bolt, nut, cotter pin & jam nut. 3/8" bolt hole. Measures 7/16" x 20 thread. ............. P/N 05-06100 ......$79.90 Wing strut barrels. ....................... P/N 05-05900 ......$15.90
McFarlane Beechcraft flight control cables and chains are coated with a corrosion inhibiting compound that meets Military Specification MIL-PRF-16173. This is the same compound used on all factory original Beechcraft flight control cables.FAA/PMA MCNAS30327-0590 Tab Actuating ......... P/N 05-04625.............$188.95 MCNAS30434-1520 ................................ P/N 05-04624.............$225.95 Fits 5/8 diameter pushrods. 1/4 - 28 threaded hole. Secure to aluminum pushrod with two cross riveted or bolted fasteners. Made from 6061-T6 5/8 diameter x 1-5/8 long rod. Two sizes available. Fits: 5/8 x .049 tube .............. P/N 05-01140 ........$9.90 Fits: 5/8 x .058 tube ............... P/N 05-01150 ........$9.90 Provides almost frictionless push pull and rotary movement of aileron and elevator push rods. Design is similar to that used in German sailplanes. Unit contains four nylon roller balls and provides 3.5 pushrod travel. Aluminum case size, 1.25 x 3.0 long. Fits 5/8 diameter pushrods. P/N 05-01110 ......................$10.85 ea. Fits 5/8 diameter pushrods. 3/16 pivot hole with .090 wide slot for bellcrank. Secure to aluminum pushrod with two cross riveted or bolted fasteners. Made from 6061-T6 5/8 diameter x 2-3/8 long rod. Two sizes available. Fits: 5/8 x .049 tube ..... P/N 05-01120...... $9.90 ea. Fits: 5/8 x .058 tube ..... P/N 05-01130...... $9.90 ea.
WIRE SWIVELS
OD 1/4
ID Length Cable Dia. Part No. 8-32 .240 3/32 Max 2361 P/N 06-01282 ........................ $0.77 ID Length Conduit Part No. .260 2 7/32 2386 P/N 06-01281 ........................ $1.55
ASSORTED SPRINGS
Spring Century Spring #186-C Rudder Return Spring Landing Brake Tension Spring* Landing Brake Part No. 01-27200 01-27300 01-27600 01-37500 01-27900 Application Spring Type Length Price ea. VariEze Tension 2 $3.80 Tension 4 1/2 $4.75 VE/Long-EZ Tension 10 $14.75 Tension 30 $11.75 Cozy Tension 12 1/2 $9.50
Stainless stainless steel wire .078" diameter. Sold by the foot. P/N 05-15510 ........................ $0.61
Pre-formed .025 thick aluminum fairings for rudder cable exit on RV fuselages. (None are supplied with the RV kits). Set contains (2) identical fairings - 1 for use on cables and 1 spare (could be used on elevator trim). Each will require some trimming to fit before riveting. P/N 12-00635.......................... $15.50
Complete flight control and trim chain kits for each of the 150 different cable groups required to service all single engine aircraft from the model 120 through model 185 airplanes. It is a tedious and time consuming job to research the part manuals for all of the cables required for a complete aircraft. McFarlane has done the research and has all of the part numbers required for your aircraft. We carry stock on all of the cables in either Galvanized-Carbon Steel or Stainless Steel. All components are fully traceable, high quality, and proof tested. Cable & Chain Kit CCKT206H-01S ...........P/N 05-04605 ....... $1,739.50 Cable & Chain Kit CCKT172175-13S ........... P/N 05-04599.....$1,246.43 Cable & Chain Kit CCKT182-13S ..............P/N 05-04603 ....... $1,140.08 Cable & Chain Kit CCKT206H-01G .............. P/N 05-04604.....$1,669.17 Cable & Chain Kit CCKT172175-13 ..........P/N 05-04598 ....... $1,503.13 Cable & Chain Kit CCKT182-13G ................ P/N 05-04601.....$1,650.51
127
TANGS
ULTRALIGHT SADDLES
S4352
P/N S4436 S4352 S4350 S4353 S4326 P/N S4451 S4453 S4456 S4459 S4460 S4462 S4482 P/N-Type 4300/I 4327/I 4328/I 4310/II 4315/I 4325/I 4329/I
Description Figure 8 2-Hole Flat 2-Hole Flat 2-Hole Bent 2-Hole Bent 3-Hole Flat 3-Hole Flat 3-Hole Bent 3-Hole Bent Anchor Tang SS EYE Bent
T 14G 16G 13G 13G 12G 14G 12G 14G 12G 14G 13G
A 2.0 2.0 2.0 2.0 2.0 1.91 1.91 1.86 1.86 1.91 1.13
B 1.38 1.25 1.25 1.24 1.24 1.09 1.09 1.04 1.04 1.19 .563
C .26 .26 .26 .26 .26 .26 .32 .26 .32 .26 .188
D .26 .26 .26 .26 .26 .26 .26 .26 .26 .50 --
Part No. 05-02076 05-02072 05-02073 05-02074 05-02075 05-02077 05-02078 05-02079 05-02080 05-02081 05-04371
Price $1.13 $1.31 $1.32 $1.56 $1.56 $2.60 $3.75 $2.60 $3.75 $3.25 $2.50
ALUMINUM BRACKETS
ALUMINUM SADDLES
A B C H .500 .750 .500 .750 1.000 1.000 .875 1.250 1.000 1.750 .625 1.250 1.000 1.750 .906 1.250 1.000 2.250 .670 1.250 1.250 1.250 1.062 1.500 1.250 2.375 .875 1.500 1.500 1.000 1.500 2.000
CABLE FITTINGS
1/16 Cable, Steel, AN111-3
P/N CF2710 .......$2.50 3/32 Cable, Aluminum P/N CF2700 .......$2.45 3/32 Cable, Aluminum P/N CF2705 .......$2.25 1/16 Cable, Stainless, AN111C-3 ... P/N CF2710S ....$1.66
Inserts into tube connector (1 x .049 wall). 7/16 dia. Cross hole 3/16 Cad2 Type 2 Yellow Chromate. P/N 05-02071....$2.95
NYLON WASHERS
Model NW2061 NW2059 NW2055 NW2045 NW1540 NWPW-3 NWPW-4 P/N 05-01971 05-01970 05-01969 05-01968 05-01967 05-01972 05-01973 O.D. 1.000 .875 .256 .875 .440 .625 .625 I.D. .256 .256 .500 .256 .190 .190 .250 Tkns Each .125 $1.12 .031 $0.52 .060 $0.52 .062 $0.32 .062 $0.18 .062 $0.52 .062 $0.39
Injection molded ABS plastic fairings used to cover hole in airframe where control cables emerge such as the rudder cables at the rear of the fuselage. May be installed on any airframe surface but is most normally used on fabric covered aircraft where they are bonded on with fabric cement and covered with a fabric patch. P/N 05-05750 ............ $4.35 pair
128
TURNBUCKLE COMPONENTS
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread. Order by proper AN number and add dash number and a letter to indicate length and strength required.
AN130 ASSEMBLY
LENGTH CABLE EYE AN 170 BARREL AN 155 FORK AN 161 CABLE EYE AN 170
AN135 ASSEMBLY
LENGTH BARREL AN 155 PIN EYE AN 165
CM WP ME
AN140 ASSEMBLY
LENGTH
AN150 ASSEMBLY
LENGTH FORK AN 161
BARREL AN 155
FORK AN 161
BARREL AN 155
AN 146 Assembly consists of 1 - AN 155 barrel, 1-AN161 Fork and 1 MS21260 Turnbuckle End. Dash No. -8S -16S -16L -22S -22L -32S -32L -46S -46L -61L -80L AN130 4-1/2 4-1/2 8 4-17/32 8-1/32 4-19/32 8-7/64 4-21/32 8-5/32 8-9/32 8-5/16 LENGTH (inches)* AN135 AN140 4-1/2 4-1/2 4-1/2 4-1/2 8 8 4-17/32 4-1/2 8-1/32 8 4-19/32 4-1/2 8-7/64 8 4-21/32 4-1/2 8-5/32 8 8-9/32 8 8-5/16 8 AN150 4-1/2 4-1/2 8 4-17/32 8-1/32 4-19/32 8-7/64 4-21/32 8-5/32 8-9/32 8-5/16 Strength (pounds) 800 1600 1600 2200 2200 3200 3200 4600 4600 6100 8000 PRICE (complete AN130 AN135 $33.25 $32.25 $29.00 $29.50 $34.50 $28.50 $31.75 $27.90 $39.50 $34.75 $33.75 $29.90 $40.75 $33.50 $42.90 $48.50 $58.25 $53.75 $102.95 $126.95 ----assembly)** AN140 AN150 $31.75 $34.85 $29.50 $32.75 $27.90 $39.90 $27.90 $34.65 $34.50 $43.60 $30.25 $38.50 $34.75 $46.25 $49.75 $47.50 $54.25 $59.00 $96.75 $114.95 --$111.95
HA AP LG EP CS IN EL AV TO PS BV
*Length measured with threads flush with ends of barrel. **Less 10% for 6 or more assemblies, 15% for 12 or more assemblies. May be assorted.
AN161 FORK
129
The ACC provides a strong positive connection with tensioning and maximum liner travel in a confined cable installation. Accommodates 3 standard cable terminals, (SA-110 plain ball, MS20664C ball & single shank, and AN111 cable bushing) including combinations of cable-to-cable & cable-to-bracket. It is light & compact without compromising safety. It utilizes an original design of overlapping walls and ridges to enhance the strength of each working surface. The ACC is precisioned CNC machined 7075 anodized aluminum. Stainless Steel Allen screws work in tandem to provide cable tensioning. 2 stainless tube-nuts provide additional structural security and prevent loosening with interlocking threads. 2 stainless steel pins are locked in place between the adjustment screws and provide an anchor for cable bushings or customized brackets. If necessary, longer adjustment screws can be used to accommodate insufficient cable lengths. Avail. Sizes Pin Dia. Part No. Price ACC-3 1/6, 3/32 .188 05-01341 $38.00 .032 .188 05-01342 $39.30 .032 1/4 05-01343 $45.80
Safety all turnbuckles with .040 dia. annealed safety wire using either the double or single wrap as described and illustrated. Do not reuse safety wire. Adjust the turnbuckle to the correct cable tension so that no more than 3 threads are exposed on either side of the turnbuckle barrel. Do not lubricate turnbuckles.
Another satisfactory double wrap method is similar to Method A. except that the spiraling of the wires is omitted as shown in figure (B).
SAFETY WIRE
The single wrap methods described and illustrated are acceptable but are not the equal of the double wrap methods. Pass a single length of wire through the cable eye or fork at either end of the turnbuckle assembly. Spiral each of the wire ends in opposite directions around the first half of the turnbuckle so as to cross each other twice. Thread both wire ends through the hole in the middle of the barrel so that the third crossing of the wire ends is in the hole. Again, spiral the two wire ends in opposite directions around the remaining half of the turnbuckle, crossing them twice. Then, pass one wire end through the cable eye or fork in the manner described above, wrap both wire ends around the shank for at least four turns each, cutting off excess wire.
Pass one length of wire through the center hole of the turnbuckle and bend the wire ends toward opposite ends of the turnbuckle. Then pass each wire end through cable eye or fork and wrap each wire end around the shank for at least four times, cutting off excess wire. After safety, no more than 3 threads of the turnbuckle terminal should be exposed.
130
PULLEYS
PULLEYS
Save the labor of re-oiling the control system every year! Aircraft pulley oil prevents pulley drag and stickiness. Pully Oil Pint..................... P/N 05-04178 ...........$24.50 Pully Oil Kit - Includes: 1 Pint of Pulley Oil, 1 Needle, 1 Each 4.5 Extension, and 1 Each 8 Extension P/N 05-04179 ...........$33.75 Pully Oiler Kit - Includes: 1 Needle oiler with oil, 1 each 4.5 extension & 1 each 8 extension P/N 05-04180 ...........$12.90
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN210A & AN210B (MS24566) Anti-Friction Bearing Control Pulley with phenolic body and ball bearing with seal. The AN210A pulleys are dimensionally the same as the B pulleys but have metal-shielded bearings rather than removable composition-seal type bearings. The low allowable design load of the -3A and -3B pulleys-is based on cable fatigue. AN210-1A, AN210-3A, AN210-1B and AN210-3B shall not be installed on frequently used aircraft controls to bend the cable more than 15 from a straight line. MS20220 (AN220) Flight Control Pulley with phenolic body and ball bearing with seal. Also available with aluminum body (MS20220A). The low allowable load limit of the -1 pulley is based on cable fatigue. When used on frequently used aircraft controls the cable wrap angle should not be more than 15 from a straight line. MS20219 (AN219) Aircraft Secondary Control Pulley with phenolic body and ball bearing with seal. MS20219A (AN219A) Pulley with anodized aluminum body and ball bearing with seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley shall not be installed in flight control systems. Examples of Part No.: Phenolic Body - MS20219-1 Aluminum Body - MS20219A1 NAS383 Series Pulley with phenolic body and graphite impregnated bronze sleeve. This is a low cost pulley widely used in aircraft, winches, cranes and remote mechanical actuation devices. A-223 and A-224 Pulleys with plain phenolic bore are used as guide and secondary control pulleys in production aircraft. BB-128-1 and BB-120-1 Pulleys have high pressure phenolic bodies and ball bearings with Teflon seals. Used in Christavia and many other aircraft.
ALUMINUM PULLEYS
Dimensions of these aluminum pulleys are same as equivalent size of MS20219 and MS20220 Phenolic Pulleys in table.
Part No MS20219A1 MS20219A3 MS20220A1 MS20220A2 MS20220A3 MS20220A4 Cable Size (in). OD 1/16, 3/32 1/16, 3/32 1/8, 5/32, 3/16 1/8, 5/32, 3/16 1/8, 5/32, 3/16 1/8, 5/32, 3/16 1.312 1.750 1.755 3.005 4.255 5.505 Groove Dia 1.00 1.438 1.255 2.505 3.755 5.005 Hub Dia. .423 .769 .475 .115 .115 .115 Bore Width Price ea Dia. .2500 .6250 .3125 .3125 .3125 .3125 .438 .438 .625 .625 .625 .625 $21.85 $47.50 $28.50 $37.50 $53.80 $62.25
PHENOLIC PULLEYS
Part Number Cable Size (In.) OD MS24566-1B 1/16,5/64,3/32 1.250 MS24566-2B 1/16,5/64,3/32 2.500 MS24566-3B 1/8,5/32,3/16 2.000 MS24566-4B 1/8,5/32,3/16 3.500 MS20219-1 1/16, 3/32 1.312 MS20219-2 1/16,3/32 1.750 MS20219-3 1/16, 3/32 1.750 MS20219-4 1/16, 3/32 2.625 MS20220-1 1/8,5/32,3/16 1.755 MS20220-2 1/8,5/32,3/16 3.005 MS20220-3 1/8,5/32,3/16 4.255 MS20220-4 1/8,5/32,3/16 5.505 A-223 1/16,3/32,1/8 1.000 A-224 1/16,3/32,1/8 1.750 A-138 (NAS) 1/16,3/32,1/8 1.250 A-123 (NAS) 1/16,3/32, 2.000 A-124 (NAS) 1/16, 3/32 2.500 A-130 (NAS) 1/8, 5/32 2.000 A-120 (NAS) 5/32, 3/16 3.000 BB-128 3/16 2.500 BB-120 3/16 3.000 Groove Dia .972 2.222 1.510 3.010 1.000 1.438 1.438 2.312 1.255 2.505 3.755 5.005 .688 1.375 .875 1.500 2.000 1.375 2.375 1.875 2.375
Load Price Hub Bore Width Limit Dia. Dia. (Lbs.) Each
SPECIAL PULLEYS
1-1/2 Inch Pulley For smooth control operation. Manufactured for aircraft float rudder operation, the pulleys can be used in virtually any application. Solid UHMW plastic for use in tough, caustic environments. Bushing insert is stainless steel with minimum lubrication required. Used with 1/16 thru 1/8 - 7x7 or 7x19 control cable. Bushing is clamped in pulley bracket. Pulley rotates on bushing. Pulley: 1-1/2 dia. x .283 wide. Bushing: 1/4 O.D. x 3/16 I.D. x .328 long. Weight: .26 oz. (including stainless bushing). P/N 05-29725 ....................... $5.25 ea. 2 Inch Pulley Larger cables, bigger job? Wherever you need a tough, durable pulley, look no further.Replace your old worn out, sticky pulleys with NAP UHMW plastic for smooth control operation. Used with 3/32 thru 3/16 7x7 or 7x19 control cable. Bushing insert is stainless steel with minimum lubrication required. Bushing is clamped in pulley bracket. Pulley rotates on bushing. Fits DeHavilland Beaver floats Pulley: 2 dia. x .470 wide. Bushing: 5/16 O.D. x 1/4 I.D. x .487 long. Weight: .58 oz. (including stainless bushing). P/N 05-29730 ..................... $11.65 ea.
.625 .777 .901 .901 .423 .423 .769 .423 .475 .475 .475 .475 -------------------
.1900 .1900 .2500 .2500 .2500 .2500 .6250 .2500 .3125 .3125 .3125 .3125 .2500 .2500 .2500 .2500 .2500 .3750 .3750 .2500 .2500
.297 .297 .484 .484 .438 .438 .438 .438 .625 .625 .625 .625 .281 .250 .265 .265 .265 .438 .438 .440 .440
300 $18.75 500 $22.00 600 $17.50 1200 $22.50 480 $21.50 480 $19.50 480 $35.75 920 $18.50 500 $19.90 1680 $26.50 2500 $28.50 2500 $40.50 --- $7.25 --- $6.97 --- $6.25 --- $10.50 --- $9.90 --- $7.95 --- $12.50 --- $21.85 --- $24.80
MCS378-1
MCS378-2
MCS378-3
PIPER PULLEYS
MCS378-4 MCS378-5
Aircraft Spruce stocks all pulleys required for Cessna single engine aircraft. Our MCS378 series pulleys replace the AN, NAS and S378 series pulleys commonly used on the Cessna aircraft. Pulley kits are available that contain all of the pulleys and cotter pins required for one aircraft. Approved Replacements for Cessna Pulleys -Cessna Model/Series
Fig. Ref. # 1 41171-000 1a 40991-000 2 41001-008 3 80421-000 4 481-609 5 11200-000 6 43001-000 7 43061-000 8 12983-000 9 10080-000 10 11008-000 11 12982-000 O.D. I.D. Part No. 2 3/4 3/8 05-02636 2 3/4 3/8 05-02637 2 3/4 5/16 05-02638 1 3/4 1/4 05-02639 1 1/2 1/4 05-02640 1 1/8 1/4 05-02641 1 1/4 05-02642 2 3/4 3/8 05-02643 2 3/4 3/8 05-02644 2 3/4 3/8 05-02645 4 3/8 05-02646 Pulley, adj. screw (alum.) dbl. groove 4 3/8 05-02647 Description Pulley, trimcrank with bushing (fiber) Pulley (no slot) Pulley w/ bearing (fiber)(41001-010) Pulley (fiber) Pulley (fiber) Pulley (fiber) Pulley (fiber) Pulley, Stablizer screw (aluminum) Pulley, double groove (aluminum) Pulley, trimcrank (aluminum) Pulley, adj. screw(alum.) single groove Price $52.50 $13.50 $32.75 $8.75 $7.90 $11.25 $13.75 $84.75 $46.85 $104.95 $118.85 $93.50 120,140,140A,150,A150,A-A150,F150,FA150,FRA150,152,A152,F152,FA152,170 ,172,F172,FR172,172RG,FP172,P172,R172,175,177,177RG,F177RG,180,182,A1 82,F182,FR182,R182, TR182,T182,185,A185,188,A188, A A188,T188,205,206,P 206,TU206,T206, TP206,U206,207,T207,208,210, P210, T210, T303, 310, T310, 320, 335, 336, 337, F337, P337, FP-337, T337, O-2, 340,401,402,404,411,414,4 21,425,441,500,501
*Replaces the listed Cessna part numbers in the specific aircraft illustrated parts catalogs. Installer must verify applicability prior to installation. Model No.* Replaces Cessna Part No.* MCS378-1 S378-1 and S378-1L MCS378-2 S378-2, A124, AN210-2B and NAS383-2 S378-3, S378-3L, A130, AN210-3B, MCS378-3 BB-208 and NAS383-3 MCS378-4 S378-4, A114, AN210-4B and NAS383-4 S378-5 S378-5 Part No. Price 05-03422 $23.50 05-03423 $35.50 05-03424 $26.75 05-03425 $35.75 05-03426 $84.00
131
BEARINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS
REP3H5** RE4H6 -1 .1900 .781 .437 .328 .281 B D W H A F Bore Outside Width Width Bore Diam. Inner Outter Shoulder Center Ring Ring Diam. to end MS Inner of Bearing No. Dash Ring Shank No. +.0000 +.010 +.000 +.010 (Approx.) +.010 -.0005 -.010 -.010 -.010 In. -.010 In. In. In. In. In. G L J Overall Thread DimenBead Length sion or Hex of Diam. Shank Across Hole +.010 Flats Depth -.010 In. In. In. K M Shank Thread Or Drill Diam. Size Inches
MS21152 MS21150
Size
-1 -2 -3 -4 -8 -9 -10
.375 .438
BV
REP4H6 REP4H8
-2 -3
.2500 .2500
.938 .938
.593 .593
.438 .438
.345 .345
1.875 1.625
2.344 2.093
1.219 .875
.12 .08
Bearings with the letter P in part number are new manufacture, with Plyoseals. Bearings without the letter P in part number are new surplus, with solid metal seals.
132
BEARINGS
Single row, ball, heavy duty. PTFE seals and CRES sealcaps. Exposed surfaces except bore, caps, and seals are cadmium plated. Prelubricated for life. Also offered with CRES 440C material and/or zinc nickel plating per OEM specifications
E C Corner Chamfer FAFNIR Shoulder Outside Width x 45 Width ANDMS Width Inner Outer Dia Bore Inner Outer Inner AFBMA Bore + .0000 Ring Ring 27640 +.000 Ring Ring Bearing Ring - .0005 +.0000 +.000 - .005 +.015 O. D. No. (Approx.) (in.) -.0005 -.005 (in.) + .015 - - .000 (in.) (in.) (in.) .000 (in.) (in.) KP3L* -3A .1900 .6250 .245 .203 .280 .005 .010 KP3 -3 .1900 .7774 .297 .270 .331 .005 .022 KP4 -4 .2500 .9014 .484 .335 .390 .005 .032 KP5 -5 .3125 1.2500 .558 .375 .469 .015 .032 KP6 -6 .3750 1.4375 .620 .469 .591 .015 .032 KP8 -8 .5000 1.6875 .620 .500 .768 .015 .044 B D W H A Pure Balls Moment Rating Moment Weight Price Constant Pounds Each Inch 1 (Approx.) Lbs. No. Size Inch 10 12 11 9 10 10 5/32 51.8 5/32 93.7 1/4 130 5/16 335 11/32 580 11/32 1060 12.08 10.13 8.84 6.77 5.44 4.46 .01 .03 .04 .09 .15 .21 $16.60 $17.75 $15.75 $21.50 $24.25 $31.95
KP SERIESAN200 / MS27640
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* Stainless steel shield (for Plya-Seals use KP3A which has same bore and O.D.) Equiv. Thrust Load = Thrust + .8 Radial Load + Moment Constant x Moment in Inch Lbs. Single row, ball, deep groove, medium duty. PTFE seals and CRES sealcaps. Exposed surfaces except bore, caps, and seals are cadmium plated. Prelubricated for life. Also offered with CRES 440C material and/or zinc nickel plating per OEM specifications
B D W H A Dia Outside Width Width Shoulder FAFNIR Inner Outer + Inner Dia. Bore AND MS Bore .0000 Ring Ring +.000 Ring AFBMA +.0000 +.000 27641 - .005 (Approx.) Bearing .0005 -.0005 -.005 (in.) (in.) No. (in.) (in.) (in.) KP3A 3 KP4A 4 KP5A 5 KP6A 6 KP8A 8 EW1/2 NORMA .1900 .2500 .3125 .3750 .5000 .5040 .6250 .7500 .8125 .8750 1.1250 .9690 .297 .281 .297 .313 .375 .250 .234 .219 .234 .250 .313 .250 .297 .380 .415 .495 .616 E C Corner Chamfer x 45 Inner Outer Ring Ring +.015 O. D. -.000 +.015 -.000 (in.) (in.) .005 .016 .005 .016 .015 .016 .015 .016 .015 .016 Max Static Non-Brinell Pure Rating Moment Moment Weight Price Rating Constant Pounds Each 1 Inch (Approx.) InchRadial Thrust No. Size Lbs. Lbs. Lbs. Balls 10 12 14 16 16 1/8 1/8 1/8 1/8 5/32 800 1100 1300 1400 2200 600 900 1000 1100 1700 51.8 73.8 100 130 250 12.08 10.17 8.76 7.68 6.14 .01 .02 .02 .03 .05 .03 $12.90 $12.75 $14.95 $13.95 $16.70 ----
KS SERIES MS27645
D W H A E C F Maximum Balls FAFNIR Outside Width Shoulder Corner Chamfer x 45 Static Rating Width AND MS Weight Bore Diameter I n n e r Outer Inner Width Inner Ring Price AFBMA Pounds Outer Ring (Approx.) 27645 + .0000 Ring Ring +.000 Bore O.D. Radial Thrust (Approx.) Each Bearing - .0005 +.0000 +.000 Ring +.015 -.000 No. Size - .005 Lbs. Lbs. No. (in.) -.0005 - . 0 0 5 (Approx.) +.015 -.000 (in.) (in.) (in.) (in.) (in.) (in.) KSP3L 3A .1900 .6250 .245 .203 .257 .005 .016 13 3/32 400 100 .01 $15.95 KSP3 3 .1900 .7774 .297 .270 .342 .005 .022 .275 12 1/8 800 200 .03 $18.95 KSP4 4 .2500 .9014 .484 .335 .400 .005 .032 .408 12 5/32 1100 300 .04 $21.70 KSP5 5 .3125 1.2500 .558 .375 .562 .015 .032 .408 13 3/16 1400 300 .10 $22.95 *KS6A 6A .3750 .8750 .313 .250 .475 .016 .016 .277 15 1/8 1000 200 .03 $23.25 * NOTE: These bearings are self-aligning for 10 in either direction except for KS6A (not AN200) which is self-aligning for 8 in either direction. Double row, ball, light and heavy duty. PTFE seals and CRES sealcaps. Exposed surfaces except bore, caps and seals are cadmium plated. Prelubricated for life. For use where high moment rigidity is required, DPP-W series only. Also offered with CRES 440C material and/or zinc nickel plating per OEM specifications B D W H A E C Maximum Static Outside Width Shoulder Corner Chamfer x 45 Balls Non-Brinell Weight FAFNIR Inner Outer Width MS Bore Dia. Price Diameter Inner Ring Bearing Pounds Ring Inner 27644 +.0000 +.0000 Ring Each Bore O. D. No. -.0005 -.005 +.000 +.000 Ring Radial Thrust (Approx.) No. Size (in.) (in.) -.005 (Approx) (Approx.) +.015 -.000 +.015 -.000 Lbs. Lbs. (in.) (in.) (in.) (in.) (in.) DPP3 -3 .1900 .7774 .495 .473 .302 .005 .02 20 5/32 2500 1700 .04 $25.00 DPP4 -4 .2500 .9014 .620 .491 .410 .005 .032 22 5/32 3000 1800 .06 $27.75 DPP5 -5 .3125 1.2500 .745 .687 .469 .015 .032 20 1/4 6900 4200 .17 $43.70 DPP6 -6 .3750 1.4375 .870 .794 .551 .015 .032 18 5/16 9700 5800 .26 --DPP8 -8 .5000 1.6875 .932 .856 .735 .015 .044 20 11/32 13000 7800 .38 $71.25 Double row, ball, self-aligning, heavy duty. PTFE seals and CRES sealcaps. Exposed surfaces except bore, caps, and seals are cadmium plated. Prelubricated for life. Also offered with CRES 440C material and/or zinc nickel plating per OEM specifications W H A E C Corner Chamfer Outside Width Shoulder x 45 Bore Dia. Inner Outer Width FAFNIR Inner MS +.0000 +.0000 Ring Ring Inner Dia. Bearing Ring 27643 -.0005 -.005 +.000 +.000 Ring Bore No. O. D. (in.) (in.) -.005 (Approx.) (Approx.) +.015 (in.) (in.) (in.) -.000 In. +.015 -.000 In. DSP3 -3 .1900 .7774 .500 .392 .304 .005 .022 DSP4 -4 .2500 .9014 .687 .464 .430 .005 .032 DSP5 -5 .3125 1.2500 .812 .656 .515 .015 .032 DSP6 -6 .3750 1.4375 .937 .750 .564 .015 .032 DSP8 -8 .5000 1.6875 1.000 .812 .775 .015 .044 B D Maximum Static Non-Brinell Weight Price Pounds Each (Approx.) Radial Thrust No. Size Lbs. Lbs. Balls 24 30 28 28 30 1/8 1000 200 1/8 13000 300 3/16 2600 600 7/32 3600 800 1/4 5000 1000 .04 .06 .16 .24 .36 $29.95 $32.60 $32.75 $79.60 $178.65 B
DP SERIESAN207 / MS27644
133
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FAFNIR AND AFBMA Bearing Number
K3L3
Extra Wide, Double Row, Ball Equipped with removable Plya-Seals Dimensionally interchangeable with the DW series, the GDW series is lubricatable through holes and a groove in the outer ring.
B D W H A E C Balls FAFNIR Pure Outside Width Shoulder Corner Chamfer x 45 Moment Width AND MS Moment Weight Diameter Inner Outer Width Bore Constant Inner Inner Ring Outer Ring AFB MA Rating Pounds +.0000 Ring Ring Bore 27647 1 +.000 O.D. +.015 Bearing (Approx.) - .0005 +.0000 +.000 Ring No. Size InchInch - .005 - .000 No. Lbs. Inches -.0005 -.005 (Approx.) +.015 -.000 Inches Inches Inches Inches Inches Inches DW4K2* -4A .2500 .6250 .562 .500 .344 .016 .016 16 3/32 121 3.49 .025 DW4K* -4 .2500 .7500 .875 .750 .435 .005 .016 14 9/64 365 2.27 .04 DW5 -5 .3125 .8750 .9375 .8125 .472 .005 .016 26 9/64 830 1.85 .07 DW6 -6 .3750 1.0625 1.1875 1.0625 .576 .005 .016 24 3/16 1830 1.38 .12 DW8 -8 .5000 1.4375 1.5000 1.3750 .715 .005 .032 22 17/64 4330 1.07 .29 EQUIVALENT THRUST LOAD = THRUST + .6 RADIAL LOAD + MOMENT CONSTANT x MOMENT IN INCH-LBS. *Bearing stamped DW4K. Bearing stamped DW4K2. These bearings are not to be used as track rollers, cam follower rolls and the like. * RETAINER TYPE
Price Each
B D W H A E C R Balls Maximum Shoulder Corner Corner Safe Weight Bore Outside Width Width Radius Diameter Chamfer x 45 Outer Working Pounds +.0000 Diameter InnerRing OuterRing Outside Inner Ring Inner Ring Bore Ring Load (Approx) -.0005 +.000 -.002 +.000 -.005 +.000 -.005 Diameter No. Size (Approx.) +.015 -.000 O.D. Radial Lbs. Inches Inches Inches Inches Contour Inches Inches Inches
.1900 .635 .687 .901 1.000 .245 .245 .484 .390 .203 .203 .335 .335 .280 .280 .390 .390 .005 .005 .005 .005 .020 Rad. .020 Rad. .015 Rad. .005 x 45 .015 x 45 .015 x 45 .550 .500 3.015 2.985 1.000 1.000 .990 10 11 11 11 1/8 5/32 5/32 5/32 200 200 400 500 .01 .20 .04 .06
The maximum safe working load is that radial load to obtain 100,000 feet peripheral travel life.
Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. Conform to MIL-F-3541.
GREASE FITTINGS
MS15001-1
MS15001-4 MS15003-5
MS15003-6
AS15002-1P
AS15003-5P
MS No. The ACS bearing regreasers restore bearings, rod ends and pulleys to like-new condition. O-ring in base of regreaser provides positive seal when bearing is secured by the threaded center post. Grease, entering under pressure at the grease fitting, is forced to flow through the bearing, flushing out the old grease and dirt, and recharging the bearing with fresh grease. Anodized aluminum construction. Available in five sizes. Bearing Bearing Size Regreaser Part No. O.D. Bore Number 3 10650-3 3/4 3/16 4 10650-4 1 1/4 5 10650-5 1-1/4 5/16 6 10650-6 1-1/2 3/8 8 10650-8 1-1/2 1/2 Complete Set of Five - P/N 12-11500 Price Each $14.50 $17.65 $18.25 $18.75 $25.90 $89.50
Thread
MS15001-1 1/4-28 MS15001-4 Taper AS15002-1P 1/4-28 AS15003-5P 1/8-PTF MS15003-5 1/8 Pipe MS15003-6 1/8 Pipe
Eff. Overall Tip Price Thread Length Angle Each Length .109 1/2 0 $0.87 .109 1/2 90 $1.69 .075 17/32 0 $3.80 .075 17/32 0 $5.25 .188 31/32 65 $1.73 .188 15/16 90 $1.98
These bright red Lubricaps are made of molded rubber and are used as grease fitting covers. The internal lip holds the cap in place and keeps out dirt, sand, and fluids. M-24529 (20% discount for 100/ each) P/N 04-01940 ...............$0.48
LUBRICAPS
134
BEARINGS
HEIM ROD ENDS MALE THREADED M AND HM SERIES
Rod Ends male threaded (HM M Series) Outer Member: Aircraft Quality Carbon Steel, Magnetic particle inspected, with protective coating for corrosion resistnce. Ball: 52100 Alloy Steel, heat treated, chrome plated. Inserts: Brass, 16 size has one piece carbon steel race. Heim M and MD series bearings are now manufactured in magnafluxed version only. As old stock is depleted, magnafluxed equivalents will be furnished as substitutes at current (higher) prices unless otherwise requested on the order. L in rod end number designates left hand thread. In this series, the D in rod end number (MD35 14) denotes drilled hole in the shank. Add suffix G to indicate lubricator is required. Example: HM-SG. Add suffix FG lo indicate flush type lubricator is required. Example: M34-14FG. Lubricator (G) (FG) available with minimum qty. required. Please Call for Pricing. DIMENSIONS Ball Length ball Housing Head Overall Flat to center Width Width Diam. Length Diam. of ball W H O D F G A +.000 +.005 +.010 +.010 +.010 Min -.005 -.005 -.010 -.010 -.010 .437 .328 .273 .750 1.560 1.935 1.000 .437 .328 .273 .875 1.375 1.812 .750 .437 .500 .437 .484 .250 .281 .312 .375 .437 .500 .562 .625 .328 .375 .304 .335 .187 .219 .250 .281 .344 .406 .437 .500 .273 .321 .354 .395 .187 .249 .306 .355 .447 .517 .750 .812 .812 .875 .469 .562 .625 .750 .875 1.000 1.375 1.812 1.562 2.312 .937 1.125 1.250 1.562 1.875 1.938 1.750 2.219 1.968 2.750 1.172 1.406 1.563 1.937 2.312 2.438 .750 1.062 1.000 1.500 .500 .625 .750 1.000 1.250 1.250 #29 .159 Max Static Approx. Radial Price Weight in Load in Each Pounds Pounds Aprox. 1,695 2,184 2,848 2,769 1,695 3,151 452 666 910 1,695 2,205 3,172 4,633 5,876 .05 .07 .07 .08 .06 .10 .02 .02 .03 .05 .08 .11 .16 .24 $33.25 $31.20 $24.20 $102.95 $41.25 $51.95 --$39.95 --$37.70 $33.00 $54.95 $19.40 --$205.95 $27.50 $210.95 $27.85 $41.50 $39.75 $24.95 $99.85 $33.40 --$99.65 $28.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Equiv. Bore Rod End Spherco No. No. B +.0015 -.0005 M34-14M NONE .1900 MD35-14 NONE .1900 MDL35-14 MD36-14 NONE .1900 MDL36-14 MD36-16M NONE .1900 MDL36-16 M44-14 NONE .2500 ML44-14 MD46-15 NONE .2500 MDL46-16 HM-2M NONE .1250 HML-2M HM-2AM NONE .1562 HML-2AM HM-3M TRE-3 .1900 HML-3M TREL-3 HM-4M TRE-4 .2500 HML-4M TREL-4 HM-5M TRE-5 .3125 TRE-6 .3750 HM-6M HML-6M TREL-6 HM-7M TRE-7 .4375 HML-7M TREL-7 HM-8M TRE-8 .5000 HML-8M TREL-8
Other Dimensions N Drill Diam. #33 .113 #33 .113 #29 .136 Ball Diam. 33/64 33/64 33/64 19/32 9/16 5/8 5/16 3/8 7/16 33/64 5/8 23/32 13/16 15/16 M Class 3A 1/4-28 5/16-24 UNF 3/8-24 UNF 3/8-24 UNF 1/4-28 UNF 3/8-24 UNF 6-32 UNC 8-32 UNC 10-32 UNF 1/4-28 UNF 5/16-24 3/8-24 UNF 7/16-20 UNF 1/2-20 UNF
#33 #21 .159 .586 1.125 2.125 2.688 1.375 #21 .159 .698 1.312 2.438 3.094 1.500 #3 .213 UNF= Universal Fine, UN=Universal Coarse
Manufactured by Triangle Mfg. Co., these bearings are spherical on the outside and are contained in a flanged, stamped metal cage, so they provide sliding, rotating, and pivoting motion. The bearings are available in nylon, bronze, or iron as shown in the table below. The FMN10 is used in the wing roots and on the torque tubes inside the fuselage of the Cozy Mark IV. Bearing Material Iron Bronze Nylon Iron Bronze Nylon Iron
Bearing Material Price Each Nylon Nylon Nylon Bronze Nylon Nylon $1.26 $1.60 $0.86 $3.97 $1.61 $0.96
135
BEARINGS
ROD END MALE THREADED
CM WP ME HA
Rod Equiv End Spherco Number Number
Outer Member: SAE 4130 steel heat treated to 175,000 PSI Cadium Plated. Ball: SAE 52100 Steel, Heat Treated, Chrome Plated. Inserts: Aluminum Bronze L in rod end number designates left hand thread. Add letter M to dash number for magnafluxed rod ends. This series is equipped with lubricators as shown. Add suffix FG to indicate flush type lubricator is required. Example: HMX-4FG. Additional costs will apply. Note: See Pg 150 for Aurora Equivalents to Heim HM & HF Series. DIMENSIONS Ball Length OverBall Housing Head Bore Flat to Cnte All Width Width Dia. Dia. of Ball Length B W H +.005 -.005 .281 .344 .406 .437 .500 O D F G +.010 -.010 1.937 2.312 2.438 2.688 3.094 A Min. 1.000 1.250 1.250 1.375 1.500 +.0015 +.000 -.0005 -.005 HMX-4G ARE 4-20 .2500 .375 HMXL-4G AREL-20 HMX-5G ARE- 5-20 .3125 .437 HMX-6G ARE 6-20 .3750 .500 .447 .875 .517 1.000 .586 1.125 .698 1.312 1.375 1.375 1.812 1.562 +.010 +.010 -.010 -.010 .355 .750 1.560 Other Dimensions N Drill Dia. #33 .113 #21 #21 #21 .159 #3 .213 15/16 5/8 Ball Dia. M Class 3A UNF 3/8-24 UNF 23/32 7/16-20 13/16 1/2-20 UNF 5/8-18 UNF 11,920 4,074 .30 7,240 7,620 2,946 3,367 .13 .18 $43.50 $214.95 $219.95 $43.80 $35.70 HMX-7G ARE 7-20 .4375 .562 HMXL-7G AREL 7-20 HMX-8G ARE 8-20 .5000 .625 HMXL-8G AREL 8-20 4,920 2,376 .09 Maximum Static Load Approx. in Lbs. approx Weight in Lbs. Radial Axial 3,260 1,710 .06 $68.85 $160.95 $39.70
Price Ea.
AP LG EP CS
33/64 5/16-24
SPECIFICATIONS:
HME SERIES
IN EL AV
Outer Member: Carbon steel-protective coated for corrosion resistance. Ball: Carbon steel-heat treated, chrome plated. Inserts: Aluminum. Liner: Self lubricating UNIFLON.
L in rod end number designates left hand thread. R in part number indicates woven uniflon. Example: HMR-3. *Uniflon The Heim Universal Corporations trademark for teflon lined rod ends and spherical bearings.
TO PS BV
Part No.
Thread Type B W .312 .312 .375 .375 .437 .437 .500 .500 .562 .562 .625 .625 H .250 .250 .281 .281 .344 .344 406 406 .437 .437 .500 .500 D .625 .625 .750 .750 .875 .875 1.000 1.000 1.125 1.125 1.312 1.312 F 1.250 1.25 1.562 1.562 1.875 1.875 1.938 1.938 2.125 2.125 2.438 2.438 A .750 .750 1.000 1.000 1.250 1.250 1.250 1.250 1.375 1.375 1.500 1.500 Thread Size .1900-32 .1900-32 .2500-28 .2500-28 .3125-24 .3125-24 .3750-24 .3750-24 .4375-20 .4375-20 .5000-20 .5000-20 E .437 .437 .515 .515 .625 .625 .718 .718 .812 .812 .937 .937 O .306 .306 .353 .353 .447 .447 .516 .516 .586 .586 .698 .698
Price
HME-3M Right Hand HMLE-3M HMLE-4M HMLE-5M HMLE-6M HMLE-7M HMLE-8M Left Hand Left Hand Left Hand Left Hand Left Hand Left Hand HME-4M Right Hand HME-5M Right Hand HME-6M Right Hand HME-7M Right Hand HME-8M Right Hand
.1900 .1900 .2500 .2500 .3125 .3125 .3750 .3750 .4375 .4375 .5000 .5000
$49.75 $136.95 -
136
BEARINGS
ROD ENDS FEMALE THREADED (F & HF SERIES)
SPECIFICATIONS: Outer Member: Aircraft Quality Steel, Cadmium Plated. Ball: SAE 52100 Steel. Inserts: Naval Bronze L in rod end number designates left hand thread. Add suffix G to indicate lubricator is required. Example: F35-14G. Add suffix FG lo indicate flush type lubricator is required. Example: HF-4FG. Add $3.00 to price for lubricator (G) (FG). Note: Standard Bearings Furnished Without Inspection Hole. If Hole Needed, Add M to P/N & At Higher Cost.
CM WP ME
Max Rad. Load Wgt. Price
Bore PN
Length Ball Flat Thread Thread Ball Dito ctr. DiamLength Size ameter of ball eter F +.010 -.010 1.375 1.375 1.062 1.375 1.375 1.375 1.375 1.375 1.469 1.062 1.062 1.312 1.312 1.375 1.375 A +.062 -.031 .750 .750 .437 .750 .750 .750 .750 .750 .750 .562 .562 .750 .750 .750 .750 M UNF-3B E REF O REF
Other Dimensions
HA AP
B +.0015 -.0005
W +.000 -.005 .437 .437 .437 .500 .437 .437 .437 .437 .593 .312 .312 .375 .375 .437 .437
H +.005 -.005 .328 .328 .328 .375 .328 .328 .304 .304 .438 .250 .250 .281 .281 .344 .344
D +.010 -.010 .750 .750 .750 .812 .750 .750 .812 .812 .938 .625 .625 .750 .750 .875 .875
K +.010 -.010 .468 .468 .375 .468 .500 .500 .468 .468 .500 .406 .406 .468. .468. .500 .500
N +.020 -.020 .312 .312 .312 .406 .406 .312 .312 .406 -
L +.010 -.010 .187 .187 .187 .187 .187 .187 .187 .187 .187 .187 .187 .187 .187 .187
FL3414M
.1900
.2500-28 .2500-28 .2500-28 .2500-28 .3125-24 .3125-24 .2500-28 .2500-28 .3125-24 .1900-32 .1900-32 .2500-28 .2500-28 .3125-24 .3125-24
.515 .515 .515 .593 .515 .515 .562 .562 .687 .437 .437 .515 .515 .625 .625
.273 .273 .273 .321 .0273 .273 .354 .354 .347 .306 .306 .353 .353 .447 .447
2850 2850 2850 2750 2850 2850 2850 2850 3700 1850 1850 2700 2700 3350 3350
.06 .06 .05 .08 .07 .07 .07 .07 .11 .03 .03 .05 .05 .08 .08
$104.95 $39.75 $38.90 $76.50 --$211.95 $39.80 $48.75 $75.50 $24.80 $41.75 $32.75 $49.25 $28.60 $39.75
LG EP CS IN EL AV TO PS BV
F44-14M .2500 FL4414M F45-19M HF-3M HFL-3M HF-4M HFL-4M HF-5M HFL-5M .2500 .250 .1900 .1900 .2500 .2500 .3125 .3125
*F34-14 Dimensionally the same as Fafnir REPB3N. **F35-14 Dimensionally the same as Fafnir REPB3N2
Protect the spherical bearing of rod ends. This patented design features a neoprene rubber seal bonded directly to an aircraft quality washer. The seal encapsulates the bearing and flexes accordingly with any change in angularity. This provides unprecedented protection from dirt and other types of contamination which may severely shorten the life of these important components. The rubber is engineered for wide range of temperature variation and is impervious to gasoline, oils, and most other common fluids. The steel washer is plated for protection from corrosion. Size 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 A .200 .257 .325 .386 .445 .515 .638 .763 B .326 .375 .450 .525 .610 .710 .900 1.00 C .442 .565 .710 .775 .910 1.125 1.250 1.375 H .096 .125 .200 .220 .250 .250 .250 .375 T .020 .025 .047 .047 .047 .047 .047 .047 Part No. 05-01434 05-2500 05-3125 05-3750 05-4375 05-5001 05-6250 05-7500 Price --$2.45 $2.45 $2.45 $2.45 $2.45 $3.05 $3.15
137
BEARINGS
UNIFLON LINED
CM WP ME HA AP LG EP CS IN EL AV TO
Rod End No. Rod End No.
HFE M SERIES
SPECIFICATIONS: Outer Member: Carbon steel, magnetic particle inspected, with protective coating for corrosion resistance. Ball: 52100 Alloy steel, heat treated, chrome plated. Race: Aluminum. Liner: Self lubricating UNIFLON. The letter L indicates Left Hand thread.
Dimensions Ball Length Ball Housing Head Overall Bore Flat to ctr. Width Width Dia. Length Dia. of ball B W H +.005 -.005 .250 . .281 .344 .406 .437 .500 .355 .750 1.312 .447 .875 1.375 .517 1.000 1.625 .586 1.125 1.812 .698 1.312 2.125 1.687 .750 1.812 .750 2.125 .937 .468 .500 .687 .375 .437 .562 .625 .750 .312 .406 .469 .531 .594 .187 .187 .250 .250 .250 .515 .625 .718 .812 .937 O D F G +.010 -.010 A K +.0015 +.000 -.0005 -.005 HFE-3M HFLE-3M .1900 .312 HFE-4M HFLE-4M .2500 .375 HFE-5M HFLE-5M .3125 .437 HFE-6M HFLE-6M .3750 .500 HFE-7M HFLE-7M .4375 .562 HFE-8M HFLE-8M .5000 .625 2.781 1.187 .875 2.375 1.062 .750 .306 .625 1.062 1.375 .562 .406 .312 .312 .187 .437 +.010 +.010 -.010 -.010 +.010 Min -.010 Other Dimensions J +.010 -.010 N L Ball Diam. M Class 3B 10-32 UNF 1/4-28 UNF Max. Static Approx. Radial Wt. (lbs.) Load (lbs.)
Price Each
$57.80 865 1,550 .03 .05 .08 .12 .17 .26 $34.90 $45.65 $99.50 $72.85 --$108.95 2,950 $26.30 ----$87.75 4,925 ---
Price Each
PS
HFX-4G
+.010 +.010 -.010 -.010 .355 .750 .447 .875 1.312 1.375
Ball +.010 +.010 +.005 +.010 Diam. -.010 -.010 -.005 -.010 .375 .437 .562 .625 .750 .312 .406 .469 .531 .594 .187 .187 .250 .250 .250 .515 5/8 23/32 UNF
Class w/ lubi- w/o lubri3B cator cator 1/4-28 3,260 6,680 .06 .08 .14 .18 .29 $34.25 $36.31 ------$53.00 $49.85 --Prices Subject to Change Without Notice
BV
HFX-5G HFXL-5G
HFXL-6G .3750 .500 HFX-7G HFXL-7G HFX-8G HFXL-8G .5000 .625 .4375 .562
13/16 7/16-20 7,620 13,660 UNF 15/16 1/2-20 11,920 19,340 UNC
138
BEARINGS
SPHERICAL BEARINGS
SERIES LS, LSS, LHA
CM WP ME
SPECIFICATIONS:
LS SERIES
Outer Member: Carbon Steel, with protective coating for corrosion resistance on all surfaces exposed after installation. Ball: SAE 52100 Steel, Heat Treated. Inserts: Brass.
LSS SERIES
Outer Member: 4130 or 4340 Alloy steel, heat treated, with protective coating for corrosion resistance on all surfaces exposed after installation. Ball: 52100 Alloy steel, heat treated, chrome plated. Inserts: Copper alloy
HA AP LG EP CS IN
LHA SERIES
Outer Member: 4130 or 4340 Alloy steel, heat treated, with protective coating for corrosion resistance on all surfaces exposed after installation. Ball: 52100 Alloy steel, heat treated, chrome plated. Dimensions Spherical Bearing No. Bore B +.0000 -.0005 LS-3 LS-4 LS-5 LS-6 LS-8 .1900 .2500 .3125 .3750 .5000 Outside Diam. D +.0000 -.0005 .6250 .7500 .8750 1.0000 1.3125 Ball Width W +.000 -.005 .281 .375 .437 .500 .687 Housing Width H +.000 -.005 .187 .281 .313 .375 .531 Chamfer C +.000 -.005 .016 .016 .016 .016 .044 Bsll Diameter E REF .406 .515 .625 .718 .937 Ball Flat Max Static Approx. Diameter Radial load Weight in In Pounds Pounds Approx. O REF .293 .354 .447 .517 .637 2960 5245 6550 8605 15600 .02 .04 .05 .08 .18 $17.45 $18.65 $29.80 $27.75 --Price Each
EL AV TO PS BV
The allowable static axial loads are one-fourth of radial loads given above.
139
AURORA BEARINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aurora P/N MM-3T MB-3T MM-4T MB-4T MM-5T MB-5T MM-6T MB-6T MM-7T MB-7T MM-8T MB-8T Aurora P/N MM-2 MB-2 MM-3 MB-3 MM-4 MB-4 MM-5 MB-5 MM-6 MB-6 MM-7 MB-7 MM-8 MB-8 In 1971 Aurora Bearing Company entered the rod end and spherical bearing market and soon became a major force in the rod end industry. Over the years, Aurora Bearing has retained its original business philosophy of furnishing a quality product at competitive prices and with service much faster than the competition. Aurora offers a complete line of standard and spherical bearings. In addition, special bearings can be designed and manufactured on request. Listed below are many of the most popular Heim bearing part numbers and the equivalent Aurora Bearing part number. On many of these items, the Aurora bearing offers substantial savings and faster delivery time. Unlisted Aurora bearings, quantity discounts and complete Aurora Bearing Company brochure available on request. SPECIFICATIONS: Body - Low carbon steel, cadmium or zinc plated at manufacturers option, dichromate treated. No. 16 series standard body is 4130 steel, not heat treated. Race - Low carbon steel, cadmium or zinc plated (manufacturers option), chromate treated. Ball - Allow steel, heat treated, hard chrome plated. The above specifications apply to most but not all Aurora bearings. Note: Bearings not furnished standard with grease fittings are available with grease fittings. Add suffix Z and $2.10 to price. Note: There is a $25.00 certificate fee applied to any Aurora Bearing order under $250.00.
AURORA BEARINGS
FEMALE
Heim P/N HF-2 HFL-2 HF-3 ----HF-4 HFL-4 HF-5 HFL-5 HF-6 HFL-6 HF-7 HFL-7 HF-8 HFL-8 Price Each $5.95 $5.90 $5.75 $6.25 $6.45 $5.95 $6.75 $6.75 $7.75 $7.85 $9.50 $9.20 $12.75 $12.00
FEMALE
Heim P/N HFX-4G HFXL-4G HFX-5G HFXL-5G ----HFXL-6G HFX-7G HFXL-7G HFX-8G HFXL-8G Price Each $15.50 $14.60 $15.75 $15.00 $16.95 $15.50 $21.70 $21.90 $26.85 $26.50
FEMALE
Heim P/N HFR-3 HFRL-3 HFR-4 HFRL-4 HFR-5 HFR-6 HFRL-6 HFR-7 HFRL-7 HFR-8 HFRL-8 Price Each $9.50 $8.00 $9.75 $8.90 $9.95 $11.50 $11.10 $11.23 $9.38 $16.50 $14.70
Refer to HEIM Bearing Chart On Previous Pages for Dimensions on Aurora Bearings.
140
AURORA BEARINGS
AURORA EQUIVALENTS TO HEIM M, ML, MD, F, & FL SERIES
CM
Aurora P/N GMM-3M-470 GMB-3M-470 GMM-3M-570 GMB-3M-570 GMM-3M-670 GMB-3M-670 GMM-3M-680 GMB-3M-680 GMM-4M-470 GMB-4M-470 GMM-4M-675 GMM-4M-680 GMB-4M-680 MALE Aurora Price $10.50 $11.95 $12.50 $27.70 $13.50 $21.25 $13.50 $28.30 $15.75 $32.25 $18.25 $39.75 $61.75 Heim P/N M34-14M ML34-14M MD35-14M MDL35-14M MD36-14M MDL36-14M MD36-16M MDL36-16M M44-14M ML44-14M MD46-15M MD46-16M MDL46-16M Aurora P/N GMW-3M-470 GMG-3M-470 GMW-3M-471 GMG-3M-471 GMW-3M-480 GMG-3M-480 GMW-4M-470 GMG-4M-470 GMW-4M-595 FEMALE Aurora Price $13.75 $25.50 $20.85 $32.10 $18.50 --$24.80 --$15.75 Heim P/N F34-14M FL34-14M F347-14M FL347-14M F34-16M FL35-14M F44-14M FL44-14M F45-19M
WP ME HA AP
LG EP CS
Aurora P/N COM-3KH COM-4KH COM-5KH COM-6KH COM-7KH COM-8KH COM-9KH COM-10KH COM-12KH COM-14KH COM-16KH
Price --$11.35 $13.95 $11.50 $22.75 $14.50 $14.70 $17.90 $26.95 $46.20 $51.50
IN EL AV TO PS
Rod End no. Right Hand Left Hand H Ref. A .015 D Ref.
CM-3S* CB-3S* .234 1.250 .625 CM-4S* CB-4S* .250 1.562 .750 CM-5S* CB-5S* .312 1.875 .875 CM-6S CB-6S .359 1.938 1.000 CM-7S CB-7S .406 2.125 1.125 CM-8S CB-8S .453 2.438 1.312 CM-10S CB-10S .484 2.625 1.500 CM-12S CB-12S .593 2.875 1.750 * Grease fittings not available on these sizes. Units
Dimension in inches C L N M +.062 .015 .010 Ref. .031 .750 1.000 .500 .437 1.000 1.031 .562 .500 1.250 1.219 .687 .593 1.250 1.562 .906 .812 1.375 1.750 1.062 .937 1.500 2.000 1.125 1.000 1.625 2.500 1.500 1.375 1.750 3.000 1.812 1.625 are supplied without grease fittings.
Thread UNF-3A 10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16
a Misalign Angle 50 50 50 50 50 50 50 50
Price Each $5.75 $5.75 $6.35 $6.85 $8.30 $10.75 $15.80 $23.70
BV
141
Built to conform with and exceed all requirements stipulated in Spec. MIL-J-6193A. High axial and torsional strengths, high strength-weight ratio, no replacement during anticipated service life of aircraft on most installations, permanent lubrication.
Price Ea $129.95 $94.85 $85.50 $85.50 $84.65 Weight Max lbs. .07 .09 .18 .24 .35 kg. .032 .041 .082 .109 .159
Dash #
MS20271-B6
+.000, -.002 +/-.015 +.031,-.000 +.004,-.025 +/-.015 Max Dia. (+.000, -.051) (+/-.381) (-.787,-.000) (+.102, -.025) (+/-.381) (+.102,-.025) Outside Dia. Overall Length Bore Depth Bore Dia. Insp. Hole Loc. Cover Dia. in mm 9.45 in 2.0 mm 50.80 66.67 69.85 80.95 92.07 in mm in .250 .375 .500 .625 .750 mm 6.35 9.52 12.70 15.88 19.05 in .437 .562 .687 .812 .937 mm 11.10 14.27 17.45 20.62 23.80 in .781 mm 19.84 .372 .495 .620 .745 .870 .500 12.70 .625 15.88 .750 19.05 .875 22.22 1.00 25.40
TORSIONAL OVERLOADS
AXIAL OVERLOADS
* Hex: 1/2 Inch *Thread: 5/16-18 *Ball: 10 mm P/N 06-00675 ............$0.68 P/N 05-07400
AP LG EP CS IN EL AV TO PS BV
Spring Century Spring #186-C Rudder Return Spring Landing Brake Tension Spring* Landing Brake
BOSTON GEAR PRODUCTS STEEL SPROCKETS - These sprock- BUSHINGS - As used on the
ets have many applications in a conSolitaire Sailplane. trol system. Hub type. Bushing Sprocket Chain No. of Price Part No. Size Teeth Price Part No. 05-03441 ......1/4 ......12 ......... $6.75 FF520-10 ......................... $0.44 25B15 ...........1/4 ......15 ......... $9.50 FF620 .............................. $2.95 05-03442 ......1/4 ......20 ....... $15.90 35B14 ...........3/8 ......14 ......... $8.50 ROLLER CHAIN - These chains fit above sprockets. 1/4 Chain - 10 Ft. ...................................... P/N 05-29325 ........... $62.85 3/8 Chain - 10 Ft. ..................................... P/N 05-29335 ........... $62.50 Extra Links - S25 ........................................ P/N 05-29300 ............. $2.65 Extra Links - S35 ........................................ P/N 05-29350 ............. $0.57 FB-35-1........Flange Bearing ...$1.10 G-481-G Gear ................ $35.95 FB-35-2........Flange Bearing ...$3.20 G-481Y-P Pinion ............ $20.50 FB-1012-4....Flange Bearing ...$2.90 NF-14-6-8 Bearing............ $1.20 FB-1013-8....Flange Bearing ...$2.50 NF-16-8-9 Bearing............ $1.20 FB-1620-10..Flange Bearing ...$6.00 FB-46-2........Flange Bearing ...$0.18
FLANGE BEARINGS
The most basic and widely used tapered bearing, the singlerow type consists of the cone assembly and the cup. It is usually fitted as one of an opposing pair. During equipment assembly, single-row bearings can be set to the required clearance (endplay) or preload condition to optimize performance. Single-row tapered roller bearings have positive roller alignment that ensures true rolling motion and generates a seating force that pushes the roller against the cone large rib. This seating force prevents the rollers from skewing off apex, thereby keeping them positively aligned and located against the cone large rib. P/N 05-29749...........................$16.90
BELLCRANK BEARINGS
Part No. BC4W10(AN218-4) Experimental Only BC5W11 BCP4W10* Bore 1/4 Flange Race Price Dia. Width Each 1-5/8 5/8 $19.75 $24.50 $94.65
ASSORTED SPRINGS
Part No. 01-27200 01-27300 01-27600 01-37500 01-27900 Spring Price Length Type Each VariEze Tension 2 $3.80 Tension 4 1/2 $4.75 VE/Long-EZ Tension 10 $14.75 Tension 30 $11.75 Cozy Tension 12 1/2 $9.50 Application
*Military P/N AN218P4 / MS20218-1. Certs Available. All bearings inspected per MIL-I45208A. 100% traceable. Currently installed on new and rebuilt certified aircraft.Prepacked with lubricant conforming to MIL-G-23827
142
THROTTLES CONTROLS
The ACS line of controls was manufactured by Aircraft Spruce and Specialty Company from 1980 to 1985. As of June, 1985 the controls have been manufactured by ACS Products Company in Lake Havasu City, Arizona. The manufacturing and inspection procedures have been approved by the FAA and original equipment manufacturers. The following engineering data will aid in properly identifying the control most suited to each individual requirement. Also shown are some available options for the controls such as plastic protective covering and steel sleeves for clamping the control to the aircraft structure. Made in the U.S.A. The A-790-12 vernier mixture control and the A-800-12 friction-lock throttle control are approved for Cessna 172, 172A thru Q; Cessna 150, 150A thru M, A150K, A150L, A150M; Cessna 152, A152. Other approvals pending. Order by Part Number and state Cessna model and serial number. A790-12 is 53 long. A800-12 length is based on serial number provided.
ACS CONTROLS
CM WP ME HA AP LG EP CS IN EL AV
ENGINEERING DATA
Control Model No. A810 A920 A930 A970 A1550
Control Type Button Lock (Wire End) Glide Free (Wire End) Ratchet (Wire End) Vernier (10-32) Vernier (Wire End) Friction Lock (10-32)
Decrease in Stroke per 360 of Bend 0.50 0.50 0.50 0.35 0.35 0.35
Control Type Friction Lock (1/4-28) Push-Pull (10-32) Push-Pull (1/4-28) Vernier (1/4-28) Push-Pull (10-32) with Bulkhead Fittings
Decrease fStroke per 360 of Bend 0.35 0.35 0.35 0.35 0.35
*Length of exposed wire. **Recommended minimum bending radius for all controls is 5 (never less than 3) All ACS controls can be supplied with a bIack Polyolefin (PO) protective cover. Price of the PO cover carries a base price of $3.00 plus the length of control in ft. multiplied by 1.50 for lengths to 10 ft. For lengths over 10 ft., use $3.00 base price plus $1.90/ft. for PO cover plus a 425 set-up fee. Example: Cost of PO cover on 5 ft. control is $3.00 plus 5 x 1.40 = $10.00. Cost of PO cover on 15 ft. control is $3.00 plus 15 x 1.90 - $31.50. Cadmium plated 2 long steel sleeves can be added to the casing to provide clamping points for securing the control to the aircraft structure. Specify sleeve location (measurement taken from under the panel nut to mid-point of sleeve). Sleeves are normally swaged to the casing but will be left unswaged when specified. Add $7.50 for installation of sleeves on A730 & A740 controls. Price/Sleeve $4.00 Threaded steel sleeves (bulkhead fittings) can be added to the casing to provide secure clamping of the control where it passes through a bulkhead. The cadmium plated sleeves are 2 long, with 1-1/2 length of 7/16-20 threads. Specify sleeve location (measurement taken from under the panel nut to mid-point of sleeve). Sleeves are normally swaged to the casing but will be left unswaged when specified. Add $7.50 for installation of sleeves on A730 & A740 controls. Price/Sleeve $6.00 STOCK CONTROLS - All stock controls are identified by a part number as shown in the descriptions of the controls. To order a stock control, specify control type, knob color, length to nearest 1/8 (measured as described in text), and any added features such as PO cover on flexible casing or steel sleeves centered at specified distances from panel nut (lengths of stock controls are in whole-foot increments and only lengths listed are stocked). Include 7-digit part number as shown in text. SPECIAL-LENGTH CONTROLS - If you require a special-length control, specify control type, knob color, length to nearest 1/8 and any added features such as PO cover, etc. Special-length controls carry a set-up charge in addition to the cost of the control (calculated as described in the texts). CUSTOM CONTROLS - If you do not find the type of control you require in this catalog, send a detailed sketch with dimensions, or the old control as a sample, to Aircraft Spruce & Specialty Co., 225 Airport Circle, Corona, CA 92880-2527 (1-800-824-1930). Custom controls are priced like similar stock controls but with a $35 set-up and engineering charge added, plus costs for any special parts which must be fabricated for the control. Vernier controls assure smooth operation - cannot creep. For coarse adjustment, depress center button and push or pull. For fine adjustment, turn knob. Smooth acting at all temperatures. Casing is made of tightly wound galvanized steel wire Inner shaft is stainless steel cable (Models A-750 and A-970) or stainless steel wire (Model A-790). Low-friction operation is provided by an internal extruded Teflon liner. Controls have 1-1/4 dia. plastic knob with 3/4 dia. aluminum release button. A protective black PVC cover is available as an option on controls. Choice of knob color - black, red or blue (FAA Color Code: Black - Throttle, Red - Mixture, Blue - Prop), and knob design (see below).
VERNIER CONTROLS
Mixture Control Prop Control Throttle Control (Red) (Blue) (Black) (FAA Color) Or White The FAA has recently adopted a standard configuration for cockpit control knobs in production aircraft type-certificated after August 11, 1986. The red mixture knob is to have six raised ridges whereas the blue prop control is to have the opposite profile with six grooves. The black throttle control knob is to have a smooth profile. The different knob contours assure positive identification by touch. Aircraft Spruce is proud to offer the ACS line of vernier controls with the new style FAA knobs at no extra charge. The throttles will be furnished with the smooth black knob, the mixture controls with the contoured red knob and the prop controls with the contoured blue knob. Look to Aircraft Spruce & Specialty Company for a complete selection of original installation or replacement controls at tremendous savings.
TO PS BV
ACS Rubber Grommets N-549-A (Small) P/N 05-02634 ............................. $2.95 ACS Large Black Knob A-663-A for the A-800 controls. 05-03416 .................................... $4.85
NOTE: The Grommets (rubber boots) fit all ACS 10-32 threaded end
controls, such as: A-750, A-800, A-770, A-1860, A-920, A-1550, A-1750, A-950, and A-1760.
143
THROTTLES CONTROLS
A-750 VERNIER CONTROL
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The A-750 vernier control has 10-32 threaded shaft for use with ball point or threaded terminal. Unique ball-socket construction permits the threaded end to swivel 8 in any direction. Casing has Teflon inner liner for low friction and heat resistance in high-temperature areas such as engine compartments. Features stainless steel end fittings, swivel, and end rod. Furnished with FAA-style knobs (Black, Red & Blue). Travel: 3-3/8. Wt. 1 lb. (4). Stocked in the following lengths (measurement taken from under panel nut to end of threaded shaft with knob pushed in). Order by Part No. Length Knob SPECIAL LENGTH CONTROLS - Use price of next longest control in chart (by Color 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. Black 05-07736 05-07748 05-07760 05-07772 05-07784 05-07796 foot) plus $20.00 set-up charge for controls under 10 feet, $40.00 for controls 10 feet and over. For controls longer than shown in chart, also add $1.45 per foot Red 05-07836 05-07848 05-07860 05-07872 05-07884 05-07896 for each foot over the longest length. Measure length from under panel nut to Blue 05-07936 05-07948 05-07960 05-07972 05-07984 05-07996 end of control with knob pushed in. Allow 2-3 weeks for special length controls. Price $73.75 $74.75 $76.00 $77.50 $79.25 $80.75 Glasair Prop Control A-750 Blue 80 long .............P/N 05-07980 ..........$88.65 3/4 - 16 UNF-2A THD. (SOLID-WIRE END) The A-790 vernier control has a .078 dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required. The Teflon liner provides low friction with heat resistance in high temperature areas such as engine compartments. Furnished with FAA-style knobs (Black, Red & Blue). Max. travel: 3-3/8. Stocked in the following lengths (measurement taken from under the panel nut to end of wire with knob pushed in). Order by Part Number. Length Knob SPECIAL LENGTH CONTROLS - Use price of next longest control in chart (by Color 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. foot) plus $20.00 set-up charge for controls under 10 feet, $40.00 for controls 10 Black 05-08036 05-08048 05-08060 05-08072 05-08084 05-08096 feet and over. For controls longer than shown in chart, also add $1.45 per foot for Red 05-08136 05-08148 05-08160 05-08172 05-08184 05-08196 each foot over the longest length. Measure length from under panel nut to end of Blue 05-08236 05-08248 05-08260 05-08272 05-08284 05-08296 control with knob pushed in. Allow 2-3 weeks for special length controls. Price $64.50 $65.25 $66.75 $68.50 $69.75 $71.50 Replacement Ball Bearing for A-790 Controls ......P/N 05-07700 ............... $2.00
The A-800 friction lock control provides positive locking at any power setting by turning the chrome collet locking nut. Unique ball-socket construction permits 10-32 threaded end to swivel 8 in any direction. Casing has Teflon liner for low friction and heat resistance in high-temperature areas such as engine compartments. Travel: 3-3/8. The 1-1/4 dia. solid knob is available in black or blue (blue knob has smooth profile, not FAA style). Stocked in following lengths (measurement taken from under panel nut to end of threaded shaft with knob pushed in). Order by Part No. SPECIAL LENGTH CONTROLS - Use price of next longest control in chart (by Length Knob foot) plus $20.00 set-up charge for controls under 10 feet, $40.00 for controls Color 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. 10 feet and over. For controls longer than shown in chart, also add $1.45 per Black 05-08636 05-08648 05-08660 05-08672 05-08684 05-08696 foot for each foot over the longest length. Measure length from under panel Blue 05-08836 05-08848 05-08860 05-08872 05-08884 05-08896 nut to end of control with knob pushed in. Allow 2-3 weeks for special length Price $67.50 $68.90 $69.95 $72.25 $72.75 $74.75 controls. Specify knob color (black, blue, red), overall length of control (from under panel nut to end of control) and stroke (2-1/4, 2-1/2). For controls over 72 long, add $1.50 per foot. For custom stroke (2-3/8, 2-3/4, 3-1/2) add $45 to cost of control. P/N 05-01436 ...................$159.95
A-800 VANS CONTROL CABLE FOR RV AIRCRAFT A-810 FRICTION LOCK CONTROL
(1/4-28 THREADED END)
The A-810 friction lock control is similar to the A-800 control but with 1/4-28 threaded end (non-swiveling). With Teflon liner. Travel: 3-3/8. Knob styles and length measurement same as for A-800. Stocked in the following lengths. Order by Part Number. Length Knob Color 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. SPECIAL LENGTH CONTROLS - Use price of next longest control in chart (by Black 05-09236 05-09248 05-09260 05-09272 05-09284 05-09296 foot) plus $20.00 set-up charge for controls under 10 feet, $40.00 for controls 10 Blue 05-09336 05-09348 05-09360 05-09372 05-09384 05-09396 feet and over. For controls longer than shown in chart, also add $1.45 per foot for Price $68.50 $69.85 $71.75 $63.00 $73.75 $75.50 each foot over the longest length. Measure length from under panel nut to end of control with knob pushed in. Allow 2-3 weeks for special length controls. 1/2 - 20 UNF-2A THD.
The A820 friction lock control is similar to the A-800 control but with a solid wire end like the A-790 control above. With Teflon liner. Travel: 3-3/8. Knob styles and measurements same as for A-800. Length Knob SPECIAL LENGTH CONTROLS - Use price of next longest control in chart (by Color 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. foot) plus $20.00 set-up charge for controls under 10 feet, $40.00 for controls 10 Black 05-09436 05-09448 05-09460 05-09472 05-09484 05-09496 feet and over. For controls longer than shown in chart, also add $1.45 per foot for Blue 05-09536 05-09548 05-09560 05-09572 05-09584 05-09596 each foot over the longest length. Measure length from under panel nut to end of Price $67.75 $58.95 $61.75 $62.50 $64.25 $65.50 control with knob pushed in. Allow 2-3 weeks for special length controls. The A-790-12 vernier mixture control amd the A-800-12 friction lock throttle control are approved for Cessna 172, 172A thru Q; Cessna 150, 150A thru M, A150K, A150L, A150M; Cessna 152, A152. Other approvals pending. Order by part number and state Cessna model and serial number. A790-12 is 53 long. A800-12 length is based on serial number provided. Note: For special length contros over 25ft. long, add extra $15.00 to the set-up fee. P/N A-790-12 ........... $142.95 P/N A-800-12 .......... $141.95 All ACS Products Controls are made in the U.S.A
144
THROTTLES CONTROLS
A-700 BUTTON LOCK DASH CONTROL
(7/16-20 UNF-2A THREADS / SOLID WIRE END)
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Provides a 10-lb. locking force for light and medium service applications. Black or Red anodized aluminum knob with aluminum release button. Has .062 dia. stainless steel wire core in flexible metal casing. May be shortened as req. Max. travel 3-1/2. Order by Part No. Length Knob Color 6 Ft. 7 Ft. 8 Ft. 10 Ft. Black 05-13172 05-13184 05-13196 05-13120 Red 05-13272 05-13284 05-13296 05-13220 Price $53.95 $54.85 $55.50 $63.75 Replacement Ball Bearing for A-700/A-1840 Controls P/N 05-02618 ............................ $2.00
Same as A-780 control above except has black powder-coated aluminum T-handle with aluminum release button. Order by part number. Length Knob Color 6 Ft. 7 Ft. 8 Ft. 10 Ft. Black 05-16872 05-16884 05-16896 05-16820 Price $67.75 $68.25 $69.90 $80.50
Simple design for push-pull operation with low friction characteristics. Has .050 dia. stainless steel wire core in flexible metal casing with polyethylene liner. May be shortened as required. Max. travel 3-1/2. Available with black or red plastic knob. Order by Part No. Knob Color Black Red Price 6 Ft. 05-13672 05-13772 $29.75 Length 7 Ft. 8 Ft. 05-13684 05-13696 05-13784 05-13796 $30.50 $31.75 10 Ft. 05-13620 05-13720 $36.65
Same as A-770 control above except has black powder-coated aluminum T-handle with aluminum release button. Order by part number. Knob Color Black Price Length 6 Ft. 05-16672 $66.75 7 Ft. 05-16684 $67.75 8 Ft. 05-16696 $68.50 10 Ft. 05-16620 $79.75
Same as A-700 control above except has black powder-coated aluminum T-handle with aluminum release button. Order by part number. Knob Color Black Price 6 Ft. 05-13572 $55.85 Length 7 Ft. 8 Ft. 05-13584 05-13596 $56.25 $56.25 10 Ft. 05-13520 $63.95
Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with 1 male & 1 female threaded end. The extensions provide the required increase in control length when threaded approximately half way onto the control. Furnished in 2, 3, 4, 5 and 6 lengths. All extensions have 10-32 threads. To order, add -2, -3, -4, or -5 to Dash number for length. P/N 10376 .............. $12.65/ea All ACS Products Controls are made in the U.S.A
145
THROTTLES CONTROLS
A-920 PUSH-PULL CONTROL
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Knob Color Black Red Blue Price Control Length 36 48 60 72 84
This control has 10-32 threaded ends with 8 swivel & 3-3/8 stroke. It has Teflon casing liner for use in high-temperature areas such as engine compartments, & .078 dia. stainless steel inner cable to minimize backlash. Stocked in the following lengths. Order by Part No. Part No. 05-12736 05-12748 05-12760 05-12772 05-12784 Price $42.50 $44.75 $45.50 $46.90 $48.65 Control Length 96 108 120 132 144 Part No. 05-12796 05-127108 05-127120 05-127132 05-127144 Price $49.75 $51.65 $56.90 $58.25 $59.65
Same as A-930 control except one end is .078 dia. stainless steel wire. Special-length controls not required as the wire end can be cut off to desired length. Order by Part No. Control Control Part No. Price Part No. Price Length Length 36 05-17036 $36.00 96 05-17096 $39.50 48 05-17048 $36.00 108 05-170108 $35.50 60 05-17060 $34.90 120 05-170120 $45.90 72 05-17072 $36.50 132 05-170132 $34.70 84 05-17084 $38.25 144 05-170144 $49.25
SPECIAL LENGTH CONTROLS Use price of 10 ft. control plus $1.45 per ft. or fraction of a foot, plus $20.00 set-up charge for controls up to 10 feet, $40.00 for controls over 10 feet. Allow 2 - 3 weeks. CONTROLS WITH COILED WIRE END Add $7.50 to cost. To order, add C to part number. Controls with coiled end have only 3 stroke rather than 3-1/2 on standard end controls. All ACS Products Controls are made in the U.S.A
Specify knob color (black, blue, red), overall length of control (from under panel nut to end of control) and stroke (2-1/4, 2-1/2). For controls over 72 long, add $1.50 per foot. For custom stroke (2-3/8, 2-3/4, 3-1/2) add $45 to cost of control. P/N 05-01435 ...........$159.95
146
FRICTION THROTTLE
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SPECIAL LENGTH CONTROLS - Use price of next longest stock length above plus $20 set-up charge. For lengths over 6 ft. also add $1.45 per foot. Allow 2-3 weeks. THROTTLE KNOB - Black solid plastic knob, 2 dia., with 1/4-28 internal threads. P/N05-29100 .........................$4.50
CONTROL HOUSING CLAMPS - AN742 plain loop type clamps to secure housing of throttles, dash controls, Bowden cable, etc. to airframe. AN742-D3 for 3/16 O.D .............................$0.22 AN742-D4 for 1/4 O.D ...............................$0.20 SLOTTED BRACKET CONTROL MOUNTNotch of end fitting locks into slot of bracket to secure control. Steel Construction. P/N 10465 ..........$19.50
Perfect for Alt Air and Carb Heat controls for the experimental/homebuilt market. Knobs can be engraved for $25.00 per knob. Custom laser marking of the knobs is available for $25.00 per knob. Receive a $15.00 discount for each additional knob with the same design.
Size Color 6Ft Black/Black 8Ft Black/Black 12Ft Black/Black Part No. Price Size 05-04607 $73.80 6Ft 05-04608 $76.50 8Ft 05-04609 $79.95 12Ft Color Clear/Black Clear/Black Clear/Black Part No. Price 05-04610 $73.80 05-04611 $75.90 05-04612 $79.95
Manufactured of duralumin and brass. Locks positively, will not vibrate loose. One-fourth turn locks it in any position and will hold up to 100 lbs. Standard travel 2-1/2. T-handle is 1-3/4 wide. Can be mounted from front or rear of instrument panel. Complete with wire and casing which may be shortened. SINGLE WIRE 5 Ft. Control................ P/N 05-15000 .................$37.85 8 Ft. Control................ P/N 05-15100 .................$22.95 12 Ft. Control.............. P/N 05-15200 .................$25.50 TWO WIRES - 8 Ft. Control................ P/N 05-15300 .................$54.95 The phenolic knobs are hard and stable. Unlike the soft injection molded knobs, they resist scratching and the effects of sunlight and age. Meet the latest F.A.R. require ments for shape. and color. When ordering please provide: Make, Model, and Serial. P/N 05-02486 ..............................$384.95 Allows easy installation of cables with oblique entry/exit angles. Includes the eyeball swivel, cable pass through, and line clasper. The Eyeball swivels up to 50 degrees and is clamped in place to complete installation. The hole is easily enlarged for other sizes.
Ball Matl. Aluminum
Appx. Wt. Model No. Hole Size .125 .188 .218 .240 .250 .260 .375 0.08 lb. SE961-B Part No. Price 05-03440 $25.95 05-00957 $25.95 05-01378 $25.95 05-01379 $25.95 05-00958 $26.50 05-00959 $25.95 05-01380 $29.25
THROTTLE CONTROL
CABLE SAFE
Steel
0.07 lb. SE961-S Part No. Price 05-00764 $34.75 05-00766 $31.75 05-01381 $34.50 05-01382 $34.75 05-00767 $35.65 05-00768 $34.50 -------
Aluminum
0.10 lb. TTp Part No. Price 05-00722 $36.85 05-00723 $34.75 05-01383 $36.85 05-01384 $37.50 05-00724 $34.75 05-00726 $37.85 -------
Allows a neat, clean throttle installation without a clunky splitter box. Supersmooth friction lock, heavy duty 0.062 inch stainless steel inner wires. Standard knob is egg shape and ball knob is sphere shape.
Description 4 Std Knob 6 Std Knob 6 Ball Knob Part No. 05-04385 05-04387 05-04389 Price $147.95 $156.85 $147.95 Description 6 Std Knob 4 Ball Knob 8 Ball Knob Part No. 05-04386 05-04388 05-04390 Price $145.95 $139.95 $156.85
147
THROTTLE QUADRANTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model TQX1 TQX2 TQX3 TQX4 TQX5 TQX6 TQX7 TQX8 These quadrants are made from aircraft quality anodized aluminum for long life and corrosion resistance brass friction plates are adjustable to fit individual preferences. Black anodized top plates are machined and engraved on a CNC mill to exacting tolerances for an excellent finish. side plates are laser cut insuring a perfect fit and feel. All hardware used meets AN standards. Note: All throttle qaudrants require a AN665-21R clevis with an AN393-11 clevis pin. The side mount style quadrants are intended for use in tandem airplanes such as the RV4, RV8, Sterdusters, Baby Great Lakes, One Design, Acro Sport & Sonerai. Center mount style is intended for use in side-byside aircraft such as RVs, Sonex, Thorp T18 & Pulsars.
3 CONTROL LEVER
Side Mount Curved Top Model: SMCT3L Wt: 10 Oz. 7-3/4 H x 4-3/4 W x 2 D P/N 05-00698 $199.95
2 CONTROL LEVER
Side Mount Flat Top Model: CT82F Wt: 8 Oz. 7-3/4 H x 4-3/4 W x 1-1/2 D P/N 05-00702 $174.50 Available in two lever designs. The 2-lever control has black plastic Throttle knob and red Mixture knob. The 3-lever control has blue Prop knob in addition to the throttle and mixture knobs. Built-in friction lock. Levers have 2-1/2 travel. Quadrants fit on left or right side of cockpit and can be used in tandem. Complete with aluminized Mylar knob inserts. Ends of throttle and prop levers have 3/16 dia. holes for attachment of push-pull controls with clevis terminals. End of mixture lever has .076 dia. hole to accept solid wire control such as Bowden cable. Made in the U.S.A. Two-Lever Quadrant ................................ P/N 05-00960..............$39.85 Three-Lever Quadrant (pictured).............. P/N 05-00961..............$51.75
3 CONTROL LEVER
Center Mount Curved Top Model: CMCT3L Wt: 12 Oz. 7-3/4 H x 7 W x 2 D P/N 05-00701 $218.95
2 CONTROL LEVER
Center Mount Curved Top Model: CMCT2L Wt: 10 Oz. 7-3/4 H x 7 W x 2 D P/N 05-00699 $199.50
3 CONTROL LEVER
Side Mount Flat Top Model: CT83F Wt: 10 Oz. 7-3/4 H x 4-3/4 W x 2 D P/N 05-00703 $198.50
2 CONTROL LEVER
Side Mount Curved Top Model: SMCT2L Wt: 8 Oz. 7-3/4 H x 4-3/4 W x 1-1/2 D P/N 05-00697 $178.95
Three main levers are chromed with anodized black Throttle knob, blue Prop knob and red Fuel knob. Also, equipped with red Emergency FCU override knob with Safety pin. Throttle and Fuel levers are designed with Beta stop. These 2 levers pull out and down for fuel idle and fuel cut off. Both of these levers are designed with Beta adjustable CAM Follower bearing movements. Stroke for Throttle, Prop and Fuel is 3-3/8 with 10-32 Rod Ends, Stroke for Emergency FCU override is 2-5/8, All 4 Levers are set up for A-950 push pull control with 10-32 threads. Throttle, Prop, and Fuel have front facing independent friction locking knobs. Not FAA Approved and for Experimental Use Only. P/N 05-03363 ....... $2,654.00
The Andair Throttle Quadrant has primarily been designed for the RV range of aircraft. Over several years of flying the RV6, Andair has designed some unique features that give this quadrant it's great looks and a solid feel. The handle of the throttle lever is angled to give the best ergonomic position and grip for the right hand, which will fall naturally to take up this position. On top of the handle is the optional flap control switch. This is a key safety feature which allows the pilot to deploy the flaps without taking his or her hand off of the throttle. This give much greater control on approaches and go arounds. The flap control switch consists of two color coded push to make buttons, one for flaps down and one for flaps up. Each lever has a small ball race at the lower end and is guided by Teflon pads at the top to give a feel that is both smooth and accurate. Along the base is a friction nut that can be used to lock all three levers, although this can be overridden with a gentle pressure. The mixture lever has a detent arrangement to positively hold it in the 'cutoff' position. Quadrant Includes Flap Switches, Propeller Lever, Mixture Lever Propeller Lever, Mixture Lever Flap Switches, Mixture Lever Mixture Lever Flap Switches Quadrant Only Flap Switches, Propeller Lever Propeller Lever Part No. 05-04481 05-04482 05-04483 05-04484 05-04485 05-04486 05-04487 05-04488 Price $452.95 $415.95 $295.95 $269.95 $258.95 $240.95 $295.95 $267.95
148
Model #1 This external reversing hook-up quadrant can be used in tandem for dual control. Available with 1, 2, or 3 lever. Weight: 10 oz. Body size: 3.5 x 4. Single lever quadrant ................P/N 05-15905 ...............$52.50 Two Lever Quadrant..................P/N 05-15910 ...............$54.75 Three Lever Quadrant ...............P/N 05-15915 ...............$63.25 Add -F to P/N and $10 to price for adjustable friction.
Designed to be more user friendly than standard control wheels. Mounting position can be raised or lowered one inch by rotating the mounting flange. All parts machined from 6061-T6 billet. The A-1310 Control has cavities for wiring, but does not come prewired or with a mic switch. They can be ordered with a hole drilled for the mic or can be drilled later. Wt: 26 oz. Mounting flange hole sizes: 3/4 or 7/8. Special smaller hole sizes: Add 10.00 3/4 Black Anodized ...........................P/N 05-02248 ...................$97.75 3/4 Bare Aluminum............................P/N 05-02279 ...................$96.25 7/8 Black Anodized ...........................P/N 05-02282 ...................$96.50 7/8 Bare Aluminum............................P/N 05-02284 ...................$97.00 These control wheels are identical in design to the new Beechcraft large rams horn style wheels. They are powder coated with a highly durable material in the same color as current Raytheon control wheels. Peeling or yellowing that occurs on older Beech wheels has been eliminated by the powder coating process. This control wheel is a direct replacement for the Beech/Raytheon 60-524080-13, 14 (for F33A, F33C, V35B, A36, and B36TC) and , -17 (for F33A, F33C, A36, B36TC, and 58) control wheels. Can be installed on many other aircraft using FAA form 337 for field approval. FAA Form 8130-3. Hand crafted black leather wrapping is available for these control wheels. Each wheel is individually hand laced and custom fitted to the wheel. We can also hand wrap your existing Beech control wheel in leather. Send your control wheel to Aircraft Spruce in Corona, CA and allow 3 weeks for delivery. An installation kit is required for each control wheel, which includes two thumb plates, a blank face plate, and mounting hardware. A Davtron MB800 digital chronometer installed in the faceplate of the control wheel is also available. The Basic Control Wheel (P/N 05-00545) now includes a white installation kit. If the black powdercoating option for this installation kit is desired it is an additional $50.00 Description Basic Control Wheel & White Install Kit Chronometer with custom faceplate Part No. 05-00545 05-00549 Price $638.00 $328.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model #2 This internal non-reversing hook up quadrant is often used on RV-4 and similar homebuilt aircraft. Available in 1, 2, or 3 lever models. Weight: 12 oz. Body Size: 3.5 x 4. Single lever Quadrant ..........P/N 05-15920 ...............$51.00 Two Lever Quadrant ............P/N 05-15925 ...............$59.75 Three Lever Quadrant .........P/N 05-15930 ...............$68.75 Add -F to P/N and $10 to price for adjustable friction.
Model #3 This internal reversing hook up quadrant is ideal for a variety of different aircraft models. Available with 1, 2, or 3 lever. Weight: 10 oz. Body size: 3.5 x 4. Single lever Quadrant .............. P/N 05-15935 ..............$54.95 Two Lever Quadrant ................ P/N 05-15940 ..............$59.25 Three Lever Quadrant ............. P/N 05-15945 ..............$68.75 Add -F to P/N and $10 to price for adjustable friction.
Model #4 This popular quadrant was specifically designed for use on RV-3 and RV-4 aircraft and is also applicable to many other homebuilt aircraft. Furnished in two lever model only and furnished with adjustable friction. Weight: 12 oz. Body size: 3.5 x 4. Two lever Quadrant .................P/N 05-15950 ............. $67.75
New lightweight, low cost wheel designed with the homebuilder in mind. Approximately same dimensions as above ACS control wheel but weighs only 15 oz. made of cast magnesium. Coated with light gray epoxy paint which can be used as finished or repainted if preferred. Drill blank mounting post as required.............................P/N 246-9 ...........$187.95ea Now flaking & peeling finish on worn control yokes can be remedied cost effectively by these pilot-installable, semi-flexible, molded grips which are available Grips with push-to-talk button built-into the top of the yoke (not the side). The Model SX-100 grips (pilot & copilot set) and optional, built-in, Model SX-101 plug-in push-to-talk button simply slip-over the thin, rams horn control yokes of Cessna 150, 152, 172, 177, Center Cushion Grumman-American AA-1, AA-5 and early Mooney aircraft. Their thick, padded feel and built-in push-to-talk button add comfort, convenience & value to vintage airplanes. The top-mounted, low profile, miniature push-to-talk button supplied completely wired with plug, jack and coiled cord, is less likely to be pressed by accident, get in the way or slip out of position than bulky, side-strapped, units. Complete your updated yoke configuration with a pair of new model SX-110 center cushions, richly finished in black. Cushions fit neatly over centers of any control yokes.
Description Application Part No. Price SX-100 Grips without Small Cessna Ram Horn - C150, 05-16600 $52.95 Push-to-Talk switch C172, C177, prior to 1973 (4ea) Cessna 150, 152, 172, 177, SX-101 Grips (set of 4) with Push-to-Talk Grumman-American AA-1, AA-5, 05-16630 $88.50 Pre 1964 Mooney Aircraft switch (left side) Cessna 150, 152, 172, 177, SX-101 Grips (set of 4) with 2 Push-to-Talk Grumman-American AA-1, AA-5, 05-16635 $122.80 Pre 1964 Mooney Aircraft switch (left & right) SX-110 center cush- Small Cessna Ram Horn - C150, 05-16610 $58.50 ion Set (Black) C172, C177, prior to 1973
Model #5 Panel mount quadrant can be an internal reversing or internal non-reversing. Available in S-series only. One, two or three levers. Friction or non-friction. Panel Mount Reversing listed below Single lever Quadrant .............P/N 05-02436 ..............$54.00 Two Lever Quadrant ...............P/N 05-02437 ..............$85.70 Three Lever Quadrant ............P/N 05-02438 ..............$68.50
Model #6 Twin-engine model: Non-reversing internal or reversing internal unit with a four-arm configuration. L-series only. Friction or non-friction. Twin Engine Reversing Internal listed below. Four lever Quadrant ...................P/N 05-02364 ..$81.75 Four lever Quadrant w/ Friction..P/N 05-02365 ..$92.50
This handle is 3-1/2 long and 1-1/4 round and fits all of the Homebuilders Quadrants above. The arm slot is offset to one side. It is molded urethane and is very durable. Add -1 or -1F (as applicable) to the Part No. and $25.00 to the price (example: 05-15925-1)
149
BEECHCRAFT ACCESSORIES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Designed & built by real-world pilots, manufactured to the highest standards. These products are built for those incomparable Beechcraft. Years of experience and the highest quality materials and construction result in the best products available for Bonanzas & Barons. All have FAA STC/PMA as applicable. Protect your investment with this heat treated lock. It installs quickly and simply ( no modification is needed) but cannot be removed without being unlocked. It is a permanent, direct replacement for the original equipment. Complete with the highest quality lock, instructions, and all hardware. P/N 05-00649 ............$346.95 Optional clipboard for clearances or notes makes a stable flight center. Spring-loaded, it snaps out of the way in seconds. Standard .....................................P/N 05-00650 .........$145.95 Deluxe (with Quick Release)......P/N 05-01335 .........$202.95 These high-strength knobs for Bonanzas are a big improvement over old, cracked original equipment and likely the best replacement knobs on the market. Bright color-coded space-age material will not crack or fade and will not get hot like aluminum knobs. P/N 05-00652 .................. $207.95 Push buttons only, with new screws P/N 05-00653 .................... $92.50 For new windows only on Mooney, Piper, Socata, Commander. P/N 05-01336 ...................$150.95
BEECHCRAFT ACCESSORIES
The DCT-01 has adjustable holding friction, that will keep the pull rod at the last set position. The DCT-01 has dual cable adjusters to syncronize the choke/throttle levers. The DCT-01 can be held to the airframe with the supplied clamp, or it can be bolted to the instrument panel. P/N 05-02492 .........................$69.95
Trikslide is a dual throttle input-mixer/slider designed especially for trikes and ultralight aircraft. Trikslide eliminates the interaction between two throttle cables. It will mount on any round or square structural member and provides smooth slide action with a full 2 stroke. Features aluminum and delrin construction with universal mounting clamps and a universal control cable connector which will fit all cable terminations. P/N 05-00782 ................. $59.95
Every Bonanza or Baron pilot will appreciate the quality workmanship in every one of these storm window hinge/latch kits. Professional construction means they work smoothly, and they fit standard factory window holes with no modifications. Complete hinge/latch kit ...... P/N 05-00654 ... $219.95 Latch & Stiker only .............. P/N 05-00655 ... $119.75 Hinges Only ......................... P/N 05-00656 ... $110.95
These PMA approved replacements for the Nose Gear Brace are used in early Bonanzas. Most of these aircraft have severely corroded nose gear braces as a result of lightening holes that allow moisture to enter and collect in the bottom of the housing. Even dry country aircraft are found to have corrosion. This is because many of these aircraft have been repainted and paint remover has entered the housing and is reactiviated when water enters the housing during aircraft washing. Applicability: Model 35 D-1 thru D6561 Model 33 CD-1 thru CD-370 Old unit (core) must be returned. FEATURES: FAA/PMA Approved direct replacement part. One piece aluminum stronter than OEM part. Durable corrosion resistant white powder coated finish. Weight increase of 4.56 lbs. beneficial for aft CG aircraft. Completely improved design eliminates potential for any corrosion. Upper and lower bronze bushings included. Grease fittings included. ................................. P/N 05-02463 ............. $3,895.00
Splits a single throttle input into three outputs for dual carburetor installations with oil injection. Clamp mounting. P/N 05-01824 ................... $31.95
High torque, 2.5.1 internal gear reduction.For dual carburetors. 825 degree rotation for fine throttle adjustment. Adjustable friction drag. Clamp mounting - no holes required. Made from weatherproof materials. P/N 05-01826 ...............$69.95
HAND THROTTLE
Beechcraft (Raytheon) Bonanza Intake Duct fits all 1964 on up: I0520 / TSI0520 & I0550 Beech Models: S35-V35-V35A-V35B-V35TC C33A, F33A, A36, A36TC, B36TC 3 ply with Nomex reinforcement. Includes Clamps. Available in Gloss Black, Gloss Red, Gloss Blue, and Matte Black. Gloss Black ...........P/N 05-06562 ......... $74.50 Gloss Red .............P/N 05-06564 ......... $74.50 Gloss Blue ............P/N 05-06565 ......... $74.50 Matte Black ...........P/N 05-06563 ......... $74.50
Convenient foot pedal throttle control. Aluminum/delrin construction with mounting hardware. Universal cable connector--fits all cable terminations. Designed especially for trikes and ultralight aircraft. P/N 05-01827 ..............$12.95
Installation Eligibility: Debonair: 35-A33, 35-B33, 35-33, E33, F33 Bonanza: G33, 35-C33A, E33A, F33A, F33C, N35, P35, S35, V35, V35A, V35B, 36, A36, A36TC, B36TC Baron: 20-21-3 95-55, 95-55, 95-B55, 59-C55, D55, E55, 58, 56TC, A56TC, 58TC, 58P RAPCO Tow Pin........................... P/N 05-01625..........................$22.90
This is a replacement for discontinued Main Gear Bolt part number CA101-810089-1. The new part number is CA101-810089-1A. This part has been tested and is superior in tensile strength and fatigue and crack resistance. Eligible for Beechcraft 1900 series aircraft, this is a life limited part that meets all requirements for the full 5 year/10,000 cycle life. The part number and serial number are engraved on the bolt head. P/N 05-04163 ............$255.95
150
FUEL TANKS
Float-action sensor in tank activates panel warning light when fuel supply is low. All-PBT unit, impervious to aviation fuel. Use AN 867-4 flange for mounting. Sensor...................P/N 6905-400 .......$31.75 Warning Light ........P/N 05-17660 .......$18.75 Bulb(GE-330) ........P/N 11-04016 .........$1.35
DISCOUNTS: 10% ON 6, 15% ON 12, 20% ON 50 Flop tubes for inverted flight are made from Aeroquip 701-6 flexible hose. End fitting swaged onto hose has a 1/4 male pipe thread attached to tank outlet. Available for any of the tanks listed, or others. Specify tank model and tube length. Minimum length available is 9 9 ........... P/N 05-20509 .... $64.85 10 .........P/N 05-20510 .....$64.50 11 ......... P/N 05-20511 .... $64.50 12 .........P/N 05-20512 .....$64.50 13 ......... P/N 05-20513 .... $64.50 Add $1.80 to 13 price for each additional inch. Specially machined AN912 fitting for connecting pickup tube to fuel tank. For 12 tubes & longer ......................... P/N 10380 ........................ $5.80 Specially machined AN912-12D for shorter than 12 P/N 10380-1 ................... $43.85
Header tank used for any aerobatic aircraft such as Pitts Specials etc. Comes with mounts to attach to existing tank straps, clamps and weld-in fitting for main tank. 16 x 7 in diameter. Holds approximately 2-1/2 gallons. Weighs 3 lbs. P/N 05-00913 ............... $348.95 Wing tank used to hold extra fuel or smoke oil in top wing of aerobatic biplanes. S1-S Wing Tank ..........................................P/N 05-00914 ......... $361.95 S1-C Wing Tank ..........................................P/N 05-00915 ......... $256.95 Experimental S2, Eagle Wing Tank ............P/N 05-00916 ......... $335.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This specially designed fuel tank drain fitting minimizes drain flow vortexing that allows water and contaminants to remain in tank no matter how many times the drain cycle is repeated. Threads are 1/8 NPT - brass throughout P/N 05-28900 ............$38.30
This fitting eliminates the need to put an angle fitting on standard adapter. 1/4 female pipe thread on side and bottom & 1 male pipe or 3/4 male pipe on bottom. Use with AN867-6 or 8. 1 Male Pipe .............P/N 05-20525 ..... $47.65 3/4 Male Pipe ..........P/N 05-20526 ..... $47.65
Finger strainers are strainers for fuel tank outlets. Standard size features a brass fitting with 3/8 male pipe thread which fits AN867-3 welding flange, and 1/4 female pipe thread for valve or fuel line fitting. Screen is 16 mesh brass. Large finger strainer has a 3/8-NPT x 1/2-M-NPT brass bushing with a T304 stainless steel screen. Standard .... P/N 05-17700... $6.75 Large .... P/N 05-04445 .....$18.50
FINGER STRAINERS
Aluminum MicroGrid is ideal for most composite aircraft structure applications and is nearly half the weight of the copper MicroGrid. Copper MicroGrid is recommended for use with carbon fiber structures. Two layers of MicroGrid are recommended over fuel tank applications. Aluminum MicroGrid (37 wide)....................P/N 05-02631 ..... $17.25 ft. Copper MicroGrid (18 wide) ........................P/N 05-02632 ..... $10.50 ft.
Weight - Lbs./SF Base Metal Thickness LWD Overall Thickness Open Area Aluminum 0.016 0.004 inch 0.080 inch 0.006 inch 68% Copper 0.029 0.003 inch 0.125 inch 0.005 inch 77%
ELECTRIC SENDER - Add $15.00 installation charge and cost of unit to price of tank. FUEL TANK HOLD DOWN STRAPS
Fabricated from.035 stainless steel. Straps are 1wide x 36 long. For VariViggen Starduster CAUTION: Electric sender should not be installed in a tank with flop tube to prevent possible entan& others. P/N 05-20400 ....................... $2.25 glement. Tank should be free of everything but flop tube. Use sight gauge with flop tube. Prices are based on tanks manufactured to the original plans as issued by the designer. Minor modifications such as changes in tank fitting sizes or locations can be made at additional charge. ANTI-CHAFE CHANNEL FOR Please submit all pertinent data with respect to desired changes at time of order. FUEL TANK STRAPS ALLOW 2-3 WEEKS DELIVERY TIME ON ALL TANKS. Neoprene rubber extrusions to hold 1 wide metal fuel tank straps. #9 Channel P/N 05-01800 ........ $1.33 Ft. CUSTOM TANKS AVAILABLE: SEND BLUEPRINT OR SKETCH FOR QUOTATION ADD $15.00 BOX CHARGE FOR CRATING TANKS FOR SHIPMENT
151
Curtis Superior Valve Co., Inc. Fuel and Oil Drain Valves have been the standard in the industry for over 60 years. Curtis valves are used in OEM applications and in the military aircraft. Most valves are made of high quality brass for resistance to corrosion and rusting ,giving them long service life and extended seal life. Most Curtis Valves have a spiral to open and twist to lock for easy fuel sampling and oil draining.
Model Number CCA-1250 CCA-1300 CCA-1350 CCA-1400 Valve* CCA-1550 Valve* CCA-1600 Valve* CCA-1650 Valve* CCA-1700 Valve* CCA-3400 Valve* CCA-3600 CCA-4300 Valve* CCA-4350 Valve* CCA-4800 CCA-4850 Valve* CCA-4950 CCA-5400 Lock Wire Drilled* CCA-5800-1 Valve Non-Locking* CCA-5800-3 Valve Non-Locking* CCA-6000 CCA-7250 CCA-7450 Valve* CCA-7500-1 Flush Valve CCA-31300 CCB-36100 CCA-36150 Valve* CCA-36400 CCA-39000 Valve* CCA-39500 Valve* CCA-39550 Valve* CCA-39560 Valve CCB-4320 Valve* CCB-36450AF Flush Valve CCB-36700 Valve* CCB-36750 Valve* CCB-37000 Valve* Thread Size 1/8 NPT 1/4 NPT 38 NPT 1/2 NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 1/2 I.D. Hose 1/4 NPT 7/16 20 NF3 9/16 18 UNF3 1/4 NPT 1/8 NPT 3/8 NPT 7/16 20 NF3 7/16 20 NF3 1/8 NPT 9/16 18 NF3 3/4 16 NF3 1/8 NPT 3/4 16 NF3 9/16 18 NF3 3/4 16 NF3 1/8 NPT 6/16 18 NF3 1/4 NPT 9/16 18 UNF3 5/8 18 NF3 5/8 18 NF3 7/16 20 NF3 3/4 16 NF3 1/8 NPT 1/8 NPT 1/2 NPT Installed Length 1.358 1.690 1.920 1.685 1.052 1.340 1.510 1.685 1.337 1.690 .625 .635 1.690 1.052 1.920 1.205 .620 1.205 1.234 1.483 1.052 1.437 1.234 1.342 1.054 1.234 1.340 1.084 1.054 2.000 .835 .755 1.058 1.058 1.685 (Body) .875 (Stem) Material B B B B B B B B B BC BC BC BC BC BC BC BC BC BC BC BC A BC AA BC BC SS BC B B BC AA BC SS B Part No. 05-04045 05-04046 05-04047 05-03060 05-01869 05-01870 05-01871 05-01872 05-01935 05-04048 05-03647 05-03648 05-04049 05-00686 05-04050 05-04056 05-03651 05-03694 05-04051 05-04052 05-03652 05-03653 05-04053 05-04054 05-03654 05-04055 05-03655 05-03693 05-01873 05-03656 05-03657 05-03658 05-03659 05-03660 05-03061 Price $11.75 $11.75 $16.50 $24.50 $11.50 $11.75 $15.50 $24.50 $12.90 $16.00 $17.75 $20.95 $18.75 $15.95 $18.50 $22.50 $18.50 $18.00 $22.75 $25.75 $12.90 $73.00 $24.75 $57.25 $15.65 $22.75 $31.50 $30.75 $26.90 $34.50 $16.75 $72.85 $11.50 $26.25 $31.50
05-01869 CCA-1550
08-06258
08-06257
Jabiru
Rotax
05-03540
Part No. Prices 05-03698 $32.75 05-03697 $34.50 08-06258 $49.95 15-05942 $34.50 15-05444 $34.50
P/N 05-04546
Helps with the installation and removal of Curtis flush mounted valves without damage. Eliminates the problem of damage as well as valve torque. Name Works with valve: Part No. Price CAA-1250, 1550, 4850, 7450, 12-02244 $48.50 CST-18 9950, 36150, CCB-36750 1700, 39550, 39560, 12-02245 $48.75 CST-78 CCA-1400,CCB-3700 CCA-1300, 1600, 3600, 4800, 12-02246 $48.50 CST-916 4900, 5900, 39000 CCA-1350, 1650, 2440, 2450, CST-1116 2460, 4320, 4950, 5400, 5800-1 12-02090 $48.50 CSTCCB-36450, CCB-36450-5 12-02280 $64.00 36450
Curtis Oil Drain Valves for Jabiru and Rotax Description Application Curtis Oil Drain Valve - 1/2 - 20 Brass Lockwire Jabiru 2200, 3300 Drilled Action-Spiral, Lock Open Curtis Oil Drain Valve - 12mm - 1.75mm Brass, Rotax 912F2, 912F3, Length 1.45 Lock Wire Drilled Action-Spiral, 912F4, 914F2, Lock Open 914F3, 914F4 Curtis 90 Degree Adapter for Jabiru and Rotax Jabiru 90 Degree Adapter CCA-2480 Jabiru 2200, 3300 Rotax Oil Drain Valve CCA-2450. For ExperiFor Rotax 912F2, mental Use Only. 1/2 - 20. Brass. Lockwire 912F3, 912F4, Drilled. Action: Spiral, Lock Open. 914F2, 914F3, 914F4 Jabiru Oil Drain Valve CCA-2460. For Experimen- For Jabiru 2200, tal Use Only. 12 mm - 1.75 mm Brass, Length 3300 1.45. Lock Wire Drilled. Action- Spiral Lock Open.
Rotax 90 Degree Adapter Thread Size: 12mm- Rotax 912F2,912F3, 08-06257 $49.95 912F4, 914F2, 1.75mm, Internal/External Brass CCA-2470 914F3,914F4 Oil Drain Valve Adapter Assembly Oil Drain Valve Adapter Assembly Rotax 05-03539 $85.50 Oil Drain Valve Adapter Assembly Jabiru 05-03540 $85.50
A simple push and twist action locks the CCB-39600 Series Quick Drain Hose in place and opens the drain. Fuel / oil flows through 5 of high grade vinyl tubing preventing spillage. Quick Drain Connector Hose Color CCB- 39600-1 CCB- 39600-2 CCB- 39600-3 CCB- 39600-4 CCB- 39600-5 Black Blue Yellow Silver Brass Used with Valves CCA-1400, CCA-1700, CCA-39550 CCA-1350, CCA-1650, CCA-4950 CCA-1300, CCA-1600, CCA-3400, CCA-3600, CCA-4800, CCA-4900, CCA-39000 CCA-4350, CCA-7250, CCA-36400, CCA-36650 CCA-1250, CCA-1550, CCA-4300, CCA-4850, CCA-9950, CCB-36750 Part No. Price 05-00138 $16.25 05-00139 $15.95 05-00141 $16.25 05-00142 $15.95 05-00143 $16.75
Auto Valve Valve No. Valve Thread Saf-Air PN PN PN CCA- 2500 1/8 NPT F391-18 SA-18 05-04885 CCA- 2600 1/4 NPT F391-14 SA-14 05-04886 CCA- 2700 3/8-24 UNF F391-32 SA-32 05-04887 CCA- 2800 7/16-20 UNF F391-72 SA-72 05-04888 CCA- 2900 1/2-20 UNF F391-82 SA-82 05-06490
This Curtis Quick Drain Security System is designed to accept a locking device that will prevent tampering and the theft of fuel. FAA TXO-C76 approved. The dash number on the model numbers below indicates the number of valves and locks included. System Contains: CCA-39650 Quick Drain Valves, CCA-39660 Quick Drain Locks, CCA-39670 Master Keys, and CCA-39680 Sample Cup Opener Part Number Contains Part No. Price CCA-39700-2 2 Tank Locking System 05-01239 $38.00 CCA-39700-4 4 Tank Locking System 05-01255 $73.85 CCA-39700-6 6 Tank Locking System 05-01256 $105.95
152
CAV-110H-4 CAV-160H-4 CAV-170H-4 CAV-180H-4 CAV-110 CAV-160 CAV-170 CAV-180 MODEL CAV-110 1/8 NPT - For Cessna 310 tip tanks; Mooney Mark 20 and 20A; all Ercoupe models; Bellanca, Taylorcraft model B; Stinson 108, 108-1, 108-2, 108-3; Voyager model 10 and 10A; Navion; Waco VK series and UPF; and Sea Bee. Fits all standard gascolators. MODEL CAV-160 1/4 NPT - For Piper models J-3, J-4, PA-11, -12, -14, -25, -16, -17, -18, -20, -22, -23, and -15 Tri-Pacer; Apache; Champion; Aeronca; Cessna T-50 and earlier 120 and 140 models; and Beechcraft AT-11 and C-18S. MODEL CAV-170 7/16-20 NF-3 - For all Cessna late 140A models, 150, 170, 170A, 170B, 172 and 175. MODEL CAV-180 3/8-24 NF-3 - For Cessna 180, 182, 185, 190, 195, 205, 210, 310, 310A, 310B, 310C and 336. CAV-100H-4, CAV-160H-4, CAV-170H-4, CAV-180H-4 - All four models come with 1/4 hose end. Note: All aircraft applications are for general reference only. Verify correct valve for your aircraft before ordering. Part No. Thread Price Part No. Thread Price CAV-110 1/8 NPT $12.90 CAV-170 7/16-20 NF $14.50 CAV-110H4 1/8 NPT $17.85 CAV-170H-4 7/16-20 NF $17.90 CAV-160 1/4 NPT $12.85 CAV-180 3/8-24 NF $14.50 CAV-160H-4 1/4 NPT $17.65 CAV-180H-4 3/8-24 NF $17.90 Replacement Seals Price Each MS29513-006 Tip (all models)...................................................... $0.24 MS29513-011 Seat (CAV-180) ..................................................... $0.26 MS29513-012 Seat (CAV-170) ..................................................... $0.26
Valve mounts in the sump, the same as original plug, with no projection. Cant be knocked off or opened by particles thrown from propellers. Opens only when operated with sampler cup, rod or wire. Clear cup permits inspection for water or contaminants. FAA approved. Part No. Thread Size Application Price Aeronca, Beech AT-11, D-18S, Piper F-391-14 1/4 NPT PA-11, 12, 18, 20, 22, Apache, cham- $23.75 pion, Howard Stinson, Waco VK, UPF, Seabee, Bellanca, F-391-18 1/8 NPT $23.00 T-Craft B, Navion F-391-32 3/8-24 Cessna 180, 182, 195 $21.85 F-391-72 7/16-20 Cessna 140, 150, 170, 172, 175 $23.00 F-391-82 1/2-20 Cessna Cardinal, 210 $21.00 Sampler Cup - Fits all F-391 Valves ......... P/N 05-17300 .............. $3.90
CM WP ME HA AP
SA32 SA82 SA53S SA18 SA72 SA187 SAF-AIR designed its line of flush mounted fuel drain valves to be an exact replacement for the Auto Valve F391 line of flush fuel drain valves. Unlike the Auto Valve, SAF AIR valves can be rebuilt. These valves offer a dependable, low-cost solution when a flush mount is needed. FAA & TSO-C76 approved. P/N Size Equiv. SA14 1/4 NPT F391-14 SA18 1/8 NPT F391-18 SA32 3/8-24 F391-32 Price $19.85 $19.85 $19.85 P/N Size Equiv. Price SA72 7/16-20 F391-72 $19.85 SA82 1/2-20 F391-82 $19.85 SA187 1/8 NPT F391-187 $19.85 SA53S 7/16-20 F391-53 $19.85
SA14
LG EP CS IN EL
Similar to the drain valves above with including the capability of locking in the open position making pre-flight check for contamination and water in the fuel system very easy. Models 1250 & 1250H are popular choices to install on gascolators. FAA & TSO-C76 APPROVED. P3750 C500 SA-60S SA5817-4C The F75 is used on wing tip tanks or any application where a 3/4-16 flush mounted fuel drain valve is needed. This aluminum valve is simple and clean to operate, using any standard sampling tube. Just push up on the center of the valve to sample fuel. Our new design allows all the fuel to enter the tube without leakage. This valve is designed for use on Cessna 310 through 441 model airplanes. The C500 is used on the bladder style wing tanks with a 1/2 diameter nozzle. The P3750 has a 3/8 NPT thread and is designed for use on those applications. Both valves provide push-to-test or push-and twist features for locking the valve open. Material is 360 brass. The SA5817-4C is used with a 3/416 bulkhead fitting to mount the valve flush with the outside skin of the plane. A hose is attached to the valve with a 7/16-20 fitting at the low point of the fuel system.Material is anodized aluminum. The SA-60S valve is the same as the CAV-160 except it is constructed of 304 stainless steel. Valve can be used in highly corrosive applications such as salt water. 4350-6L has a 7/16-20 thread and a long stem that can be cut to length for your application. Material is anodized aluminum. Part No. C500 P3750 F75 Thread 1/2 Tube 3/8 NPT 3/4-16 Price $14.50 $17.25 $75.80 Part No. SA-60S 4350-6L SA5817-4C Thread 1/4 NPT 7/16-20 3/4-16 Price $35.75 $64.50 $77.65 4350-6L F75
2500H 3750
AV TO PS BV
Part No. Size Price Ea. Part No. 1250 1/8 NPT $15.75 1250H 2500 1/4 NPT $15.75 2500H 3750 3/8-24 $14.50 3750H 4375 7/16-20 $15.75 4375H *These valves come with 1/4 hose adapter
Developed in compliance with Airworthiness Directive 85-06-04 for Piper aircraft. Fits most popular Piper aircraft, including J-3, 4, 5; PA-12, 14, 15, 16, 17, 18, 20 & 22. Fuselage kit includes a bushing, elbow, elastic grommet, hose, clamp, drain valve, warning sign & instructions (AD 85- 06-04). Wing kit incl. bushing reducer, drain valve, warning sign & instructions (AD85-06-04). Fuselage Tank Fuel Drain Kit ......................... P/N 05-01892 .......$42.50 Wing Tank Fuel Drain Kit ............................... P/N 05-01893 .......$23.25 Wing Tank Fuel Drain Kit/Flush Drain ........... P/N 05-01894 .......$21.75
These high quality fuel drain valve kits are FAA-PMA approved for a wide range of Cessna, Piper, and Beechcraft aircraft. These drain valves prevent drain nipple slippage, require no O-rings, feature corrosion free construction, and use the industry standard 1/8 pipe thread valve. Features: The valve can be rebuilt Fuel resistant o-ring - Fluorosilicone Push to test against the wing surface Specifications: Material: Valve 360 Brass, Housing Stainless Finish: Cadmium Part No. Price Plate Temperature: -100 to Description +350F (-73 to +177C) O- Kit for Cessna 05-03566 $136.95 Kit Beech 05-03567 $137.95 Rings: M25988-005 Pressure: Kit Piper 05-03568 $137.95 60 PSI max.
153
All-metal gascolator with S.S. screen, 1-7/8 dia. cadmium plated steel bowl w/quick drain. Top is CNC machined from 6061-T6 aluminum. Top casting has 1/4 pipe ports for 3/8 fuel line and one 1/8 pipe port for primer fitting. Wt: 8 oz. May be used with aviation and/ or auto fuel. Made in the U.S.A. P/N 10580............$69.50 Replacement Gaskets - For auto fuel 3/32 thick x 2-1/8 O.D. 10536-1 P/N 06-00441 ........$5.85 Replacement Screens 120 Microns Stainless Steel ..................... P/N 10543-1 ..........$2.15 74 Microns Stainless Steel ....................... P/N 05-03436 ........$2.70
ACS GASCOLATOR
The incredible GATS Jar allows a pilot to pour the fuel used in the preflight check back into the fuel tank without fear of water contamination. The jar uses a special separator screen that, when coated with avgas, forms a barrier to water and debris, yet allows passage of avgas. The GATS Jar also detects jet fuel in the event of inadvertent fueling of your aircraft with jet fuel. By using the GATS Jar, pilots can help protect the environment by pouring sample fuel back into the tank instead of on the ground. 12 oz. ...................... P/N 05-21250 ......................... $16.95 16 oz. ...................... P/N 05-04237 ......................... $18.95 Replacement actuator ................. P/N 17-00043 ........................... $5.95 The unique snap-on probe fits all quick-drain valves, stores compactly, and reduces spillage, loss, and probe breakage. The 4 (10.16cm) transparent cylinder has the octane color-coding molded in the side for quick reference. Also includes a chrome-plated screwdriver blade with both a Phillips and a slotted head. 4 .......................... P/N 05-00448 .................. $6.50 6 .......................... P/N 05-03386 .................. $7.50 This fuel sampler cup is designed for use with many popular fuel drain valves including the F391 drain valves used on many of todays productions aircraft. Wide bowl allows fuel sampling without fuel dripping onto the hands. P/N 05-17300 .............. $3.90 Protect yourself from fuel contamination by visually checking the fuel for water and debris. Clear cup with a reinforced steel pin that works with most aircraft. Measures 2-1/2 high x 1-3/4 diameter. Lifetime warranty. P/N 13-02353 .............. $5.50
New ACS high pressure gascolator. Lighter weight and simpler design than the ACS "classic" gascolator. Bailwire and attaching hardware have been eliminated. Threaded collar secures bowl to top. Tested to 50lbs. Bowl is cadmium plated and top and collar are anodized for corrosion protection. Made in the U.S.A. High Pressure Gascolator ............................ P/N 05-04248 ..........$99.65 Replacement Gasket 10536-1 ...................... P/N 06-00441 ............$5.85 Replacement 120 Micron Screen 10543-1 ... P/N 10543-1 ..............$2.15 Replacement 74 Micron Screen ................... P/N 05-03436 ............$2.70 CNC-machined out of 6061 aluminum for longer use. Anodized O ring seals for improved sealing capabilities, a bayonet tab locked bowl system. Direct replacement for factory parts. FAA-approved for many Piper, American Champion, Husky, Maule, Taylorcraft, Dynac and Cessna aircraft. Fits in existing Piper mounting brackets. Mounting brackets available for Cessna. Great for homebuilders also. All fittings and drain plugs are for display purposes only and are not included with Gascolator purchase. Aircraft Make and Model, Serial Number and N number required to make sure correct gascolator is ordered. Check the Aircraft Spruce website for aircraft cross-reference list or contact us for gascolator approved for your aircraft.
FAA-APPROVED GASCOLATORS
This deluxe version of the popular screwdriver type fuel checker features some great improvements in the product. A removable bronze (3/32 brazing rod) replaces the flimsy plastic stick. Magnified viewing area allows close inspection of contaminates, and 100% of the sample can be seen. A removable splash guard prevents a fuel shower on the user, and the guard stows flat along side when not in use. This tester incorporates a stronger design to resist cracking and breakage. P/N 05-17215............ $17.23 This compact fuel tester / double tip screwdriver combo measures the presence and percentage of alcohol in gasoline, and tightens errant screws. P/N 05-03439.............. $5.75
GASOHOL TESTER
SA3-10
oz. oz. oz. oz. Part No. 05-00840 05-02674 05-02675 05-00894
SA3-10A
Price $218.00 $219.95 $285.95 $283.00
EL AV TO PS BV
8130 Forms are not available for these gascolators. * Note: This unit does not require a bracket for installation.
Can be used on fuel injection systems up to 50 psi .Anodized inside and out to prevent corrosion. Has two 1/4 NPT ports for 3/8 fuel line, a 1/8 primer port, and a 1/8 NPT drain valve port. Mounting bracket not included. Now comes ready to mount to firewall. Gascolator ...........................P/N 05-00632 ........$78.95 Replacement Screen ...........P/N 05-25972 ..........$2.50
P/N 05-33031
USHER GASCOLATOR 4
Sump, Inspect, Collect, and Safely Pour Back fuel samples. The MultiSump+ now includes a fuel strainer! A micro-mesh stainless steel screen keep impurities and water from entering the fuel tank during pour back. In addition the MultiSump+ allows the pilot to sample and individually inspect fuel from each sump while a quick dump feature transfers fuel to the lower catch can thus eliminating emptying the tester after each sump. P/N 05-04653 ...........$24.95
For homebuilts. Used on VariEze and various gyrocopters. Rated to 10 PSI. Not recommended for fuel injected systems. Description Part No. Price 1/4 Fuel Filter (Metal) 05-33031 $6.25 3/8 Fuel Filter (Plastic) 05-04701 $6.75 1/4 Fuel Filter (Plastic) 05-33001 $5.95 1/4 Fuel Filter (Glass #804) 804 $14.75 3/8 Fuel Filter (Glass #806) 806 $14.75
FUEL FILTERS
Prevents return fuel flow during normal operation but provides by-pass fuel feed in an emergency if the fuel pump fails. Wt. 1 oz., 2-7/8 long. Use with tube fittings for 3/8 dia. fuel line. Anodized for corrosion resistance. P/N 10630 ................ $27.50
In-line, high-capacity, translucent filter with screen. Has standard 1/4 barb inlet and outlet tubes. P/N 05-01030 ..............$3.85 In-tank type. Brass construction with fine-mesh screen. Has standard 1/4 barb inlet and outlet tubes. P/N 05-01031..............$3.90
FUEL FILTER
P/N 05-33033
FUEL FILTER
P/N 804
Plastic in-line fuel with 3/8 inlet & outlet - metal version is 33033 with hoses and camps. Style: Fuel Filter. Height: 3.543. Outer Diameter: 1.826. Nominal Micron Rating: 30 P/N 05-04701..............$6.75
154
ANDAIR GASCOLATORS
CM WP ME HA AP LG EP CS IN EL AV TO PS
For use with any Andair valve. The kit includes everything needed to operate the valve remotely by way of a specially extruded tube. There is no riveting involved, just cut the tube down to length and fit together. To maintain the firm detent at each tank selection, there is a detent cap on the top of the valve. The special tube then fits into this. Then, so as to maintain the safety feature, where the valve cannot be inadvertently switched off, the button has been moved to the upper section. Like the standard valves, the button must be raised to switch the fuel of. The tube is available 6 or 12 long and 4 extension options are available. The extension must be ordered with the valve. (i.e. an extension cannot be retro fitted to a previously purchased valve).
Size (In.) 6 6 6
Price
Call or Email for price and availability
Size (In.) 12 12 12
Price
Call or Email for price and availability
7/16-20 05-00713 $64.50 9/16-18 05-00716 $64.50 1/4 05-00717 $64.50 hose 1/4 05-00718 $64.50 hose 3/8 05-00719 $64.50 hose 3/8 05-00721 $64.50 hose
ET 1JU 2UJ
6 12
CK250-B Yes 7/16-20 05-00714 $64.50 CK375-B Yes 9/16-18 05-29555 $64.50 CK250-H CK250H-B CK375-H CK375H-B No Yes No Yes
ET: with one universal joint on lower part of valve UJL: with one universal joint on the upper section of the valve UJU: with 2 universal joints.
Example: E-FS25f5-M-ET-6 = (6long, 1/2Left, Main, Right, Off, Straight Ext. Valve) E-FS20-20-D2-6M-2UJ-12 = (12long, 3/8duplex fuel selector extension with 2 UJs and 12 tube).
Includes mounting flange and backing plate. Mount your gascolator solidly on the firewall with this special bulkhead fitting. Simply drill a 5/8" hole through the firewall and a backing plate on the cabin side and rivet the 1-1/2" x 1/8" flange to the firewall. Connect the incoming fuel line to the AN6 male tube fitting on the cabin side. Screw the gascolator onto the 1/4" male pipe (on the engine side). Machined from mild steel (303 stainless steel). P/N 05-00907 ....................$18.85
* MIL-F-5504 Qualified * Qualified for use in MS28720 and AN6234 filter assemblies. * Operating Temperatures: -65F TO + 275F * Element Collapse:150PSID Minimum. * Filtration:10 Micrometers. * Hdraulic O-ring. * Media: microleat(c) elements (resin impregnated cellulose) * Bubble Test 100% AN No. A C D Part No. Price AN6235-1A 1.937/ 1.875 .859/ .813 .375/ .373 08-07076 $7.75 AN6235-34 3.500/ 3.4381.656/ 1.610 .875/ .872 08-07104 $14.50
BV
155
Used to switch the fuel in an appliction where there is a fuel injected engine that needs flow return. It allows you to pipe surplus fuel to the same tank from which it was drawn. This avoids the worry of overfilling the return tank or having an overly complicated fuel system. Engines that can benefit from this valve are Surburu, Continental, Rotax, and Diesel engines. The FS20-20-D2 has two 3/8 sections where as the new FS25-20-D2 has one 1/2 feed section and on 3/8 return section. The valves can be supplied with either male or female fittings. FS25-20-D2 DUPLEX VALVES - New to the range is the FS25-20-D2 which has a 1/2 feed ports and 3/8 return ports, for use in larger injected engines.
Model No. Part No. FS20-20-D2-6M 05-06926 FS20-20-D2-6F 05-06927 FS25-20-D2-6F 05-29562 FS25-20-D2-6M 05-29563 Description Thread Ports 3/8 Feed & Return 1/4 Pipe Male 3/8 Feed & Return 9/16-18a Female 1/2 Feed, 3/8Return 1/4,3/8pipe Female 1/2 Feed, 3/8Return 9/16-18, 3/4-16 Male Price $594.00 $594.00 $665.00 $647.00
This new duplex valve from Andair has been designed for the use with low flow rate fuel and vapor return systems. An example being the Turbo charged Rotax 912S. Base on the popular FS20x2, the FS22 retains the key features of small size and light weight. The return line valve usesour a new style PTFE disc, operated via the main ball valve allowing the return fuel to flow back to the tank from whicn it ws drawn. The FS22 is availab le in two forms, the FS22-2PD with its 1/8 female pipe fittings pointing downward (see image) or the FS22-2PS (sideways pointing fittings). Both valves include all of the safety features that appear in he full range of Andair Fuel Selectors.
Model No. Part No. Description Thread Ports Price FS22-D2-6F-PS 05-29564 3/8Feed,1/8Return 1/4,1/8Pipe Female $376.95 FS22-D2-6M-PS 05-29566 3/8Feed,1/8Return 9/16-18 Male $291.95 FS22-D2-6F-PD 05-29567 3/8Feed,1/8Return 1/4,1/8Pipe Female $378.00 FS22-D2-6M-PD 05-29568 3/8Feed,1/8Return 9/16-18 Male $247.95
The FS20x4 Fuel Selector is designed for high wing aircraft where it is possible to feed from both tanks simultaneously. Porting for the both position is done internally so there is no need to T the two tanks together. There is a 90 degree action between each tank selection, and the safety feature where the red button on the lever has to be raised to switch off the fuel. On the FS20x4 there are 3 ports. The lower port is the outlet to the engine and can be Male AN-6, Female 1/4NPT or a Banjo fitting which is a 360degree adjustable fitting with a male AN-6 end. Click here for more information on the fitting options. The inlet, side ports can be any of the 3/8 fittings that Andair supplies and are at the 9 Oclock and 12 Oclock positions when looking at the valve with the brass ball spindle pointing upwards (see image to left). At the 3 Oclock position there is a blanking plate that covers up a PTFE gland that opposises the forces of the other 2 PTFE glands. This cannot be removed. One of the great features of this unit is that when the selector is in the OFF position, there is no cross feed between each tank. So if you have your aeroplane parked on a slope, or if one tank is fuller than the other, no cross-feed will occur. FS20X4 Male.................................... P/N 05-02635 .................$258.95 FS20X2 Female ............................... P/N 05-29505 .................$249.00 FS20X1 Female ............................... P/N 05-29506 .................$258.95 FS20X3 Female ............................... P/N 05-29507 .................$249.00 FS20X5 Female ............................... P/N 05-29509 .................$248.50 FS20B4-M Banjo Male ..................... P/N 05-01419 .................$298.95 FS20F4 Female................................ P/N 05-01432 .................$249.00
FS20 3/8
FS25 1/2
156
FUEL VALVES
A full-flow plug valve with solid bottom and integral mounting bracket. Brass body and plug. Floating stem with O-ring prevents leakage. Packed with synthetic grease which resists gasoline and solvents. Indicating click on 3-port and 4-port valve (CN models) tells when handle is in full open or closed position. Tested to 30 PSI. Not FAA approved.
Model No. 6749 210-CL 05-01032 210-CN 05-01033 200-CL 05-01034 200-CN Part No. Imperial Equiv. 108HD-04 108HD-06 114-HD-04 114HD-06 Valve Type 3-Port* 3-Port* 4-Port** 4-Port** Pipe Thread 1/4 Female x 1/4 Female 3/8 Female x 3/8 Female 1/4 Female x 1/4 Female 3/8 Female x 3/8 Female Price $26.65 $29.96 $29.90 $33.50
*For 2 tanks. Flow is from either side to branch. **For 3 tanks. Flow is from any side to bottom outlet. Note: Order valve with 1/4 pipe threads for 3/8 dia. fuel line. Order valve with 3/8 pipe threads for 1/2 dia. fuel line. These pipe thread sizes are the ones normally associated with the indicated tube sizes.
This lever is a direct replacement for the lever that comes standard with the Home-built Shutoff Valve, part numbers 210-CN, 200-CL and 200 CN. It will also replace the lever that is shipped standard with nearly all of the Vans RV Series aircraft. The appearance is much nicer than the stock lever, it is red in color (the standard color relative to fuel) and needs no hardware other than what is sent with the valve. When mounted according to Vans plans the stock lever actually uses the handles as the pointer. P/N 05-03047 ......$39.50 Excellent for lubricating valves and slow moving components exposed to harsh chemicals and solvents. resists deterioration by chlorides, solvents, acids and condensate. Dow 3452 is a white, fluorocarbon thickened, fluorosilicone fluid based grease with a temp. range of -20 to 450F. z2 oz. tube. P/N 09-00333 ................. $49.75 This plate is designed to work with the Vans Series of Aircraft. The Vans kits do not provide the builder with a solution for determing what position the fuel selector is in, therefore leaving the builder to create his or her own solution for this situation. This plate used in combination with RV Fuel Lever clearly labels the valve as the fuel valve and gives the position of the valve. The aesthetics of the cockpit are improved and all labeling is chemically resistant. PN 05-03661 .......$42.95 The lightest (4 oz.) smallest (1.5 long), easiest to operate ball type (not plug) on-off fuel valve available. Light operating force makes it ideal for remote operation. Not FAA approved. Forged brass with 1/4, 3/8, or 1/2 female pipe ends. 1/4 NPT valve ........... P/N 05-23325 ......... $13.65 3/8 NPT valve ........... P/N 05-23330 ..........$13.75 1/2 NPT valve ........... P/N 05-01026 ......... $25.50 These 3-way Weatherhead valves, with 1/4 female pipe ports feature a Delrin-spool design for smooth operation. Handle mounted on 1-1/4 long shaft. Not FAA approved. Model No. 6749 3-Port Valve - Flow is from either side to middle port. P/N 6749 ...............$26.65 Model No. 6747 4-Port Valve - Flow is from any horizontal port to bottom port. P/N 6747 ...............$24.90
After a long development process, heres a completely new family of Fuel Valves. Hi-Tech Seals give easy operation and are suitable for all current fuels. The simplicity promises a long reliable life. The SPRL-V1 is a three/four way fuel selector offering left-off-right and both if required. There are 90 degrees between selections and the absence of a lower fitting reduces the depth required. These English fuel valves have some great features that make them better than the rest. Ceramic disks have no soft moving/rubbing seals to wear out, unlike other valves but also give an indefinite life with a very smooth light action. The lift and turn selector is instinctive, secure, and easier to use than the complex lift button type. The locking detents avoid accidental movements. The fixings match most installations, and the internal ports prevent cross feeds, unless selected to Both. Male AN fittings enable you to plumb straight into the aeroplane system with no extra fittings to buy. The lightweight alloy construction is anodized for protection; the Viton 0 ring seals are suitable for all current fuels. For experimental aircraft only. Fittings must be purchased separately. Please note that the accessories listed below are the the only compatible accessories; other standard accessories will not fit these valves. SPRL V1 3 way valve ................................ P/N 05-04450 ...........$159.95 SPRL V1 4 way valve ................................ P/N 05-04451 ...........$159.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ACCESSORIES
Must purchase these parts. Standard AN do not fit the valves. AN6 Male Fittings (pk of 3) ........................ P/N 05-04452 .............$11.65 AN8 Male Fittings (pk of 3) ........................ P/N 05-04453 ...............$9.95 NPT 1/4" Female Fittings(pk of 3) ............. P/N 05-04454 .............$10.95 NPT 3/8" Female Fittings (pk of 3) ........... P/N 05-04455 .............$11.65 SPRL On/Off V2 Male Valve ..................... P/N 05-06468 .............$91.75 SPRL V3-3P Duplex Valve ........................ P/N 05-06469 ...........$199.90 SPRL V3-4P Duplex Valve ........................ P/N 05-06470 ...........$199.90 We offer a remote drive so as to have the selector conveniently to hand while the valve and pipes are on the bottom of the fuselage or even on the front of the firewall. We include a flexible universal drive joint to accept small errors in alignment. The standard drive is 12 long but drive shafts up to 6 feet are available. The universal joint is modestly priced as it is not new, but for this usage a mil spec government surplus joint is ideal. P/N 05-06501 .............$99.00
We have sourced a high quality gear box to offer a right angle drive with obvious applications to rear engined aeroplanes like the Rutans and other installations where it is not convenient to drive the valve direct (eg. cubs where the valve is easier installed away from the seats and pedals)........................ P/N 05-06558 ...........$114.65 We include a flexible universal drive joint to accept small errors in alignment. The standard drive is 12 long but drive shafts up to 6 feet are available. The universal joint is modestly priced as it is not new, but for this usage, new, surplus is ideal. The drive tubes can be cut to any required length and simply push together. We assume that the aeroplane structure will prevent the parts separating once they are installed. Price per foot. 6 shipping limit. Note: Special order lengths available upon request. P/N 05-06557 .............$19.85
These stainless steel valves from Parker Hannifin are designed to resolve the corrosion problem, as well as age and wear issues. They are identical to the originals, and they use the same gaskets O-rings, and procedures. Installation is quick and easy. FAA Approved. The fuel selector valve is manufactured with new stainless-steel design for more durability and performance. Right ..... P/N 05-04881 .....$3,865.00 Left ..... P/N 05-04883 ..$3,865.00 This J-3 fuel valve includes a steel handle for use with the original pushpull shut off control. this valve is a significant improvement over the orig nal brass style fuel valve. The new valve has a stainless steel ball seated in an inert composite seat. This improved design eliminates the stiff operation and leaking around the shaft that the original design was prone to. PMA approved. P/N 05-00848.......... $141.95
The fittings enabled you to plumb straight into the aeroplane system with no extra fittings to buy. The lightweight alloy construction is anodized for protection; the Viton 0 ring seals are suitable for all current fuels. For experimental aircraft only. Fittings must be purchased separately; if needed, 3 AN-6 fittings come with the valve.
Fittings: AN8 Male NPT 1/4 OR 3/8 Female and banjo fittings are available, all seal to the valve with O ring system Standard AN fittings cannot mate directly to the valve. 1/4 Fitting Set ........................................... P/N 05-06471 .............$39.50 5/16 Fitting Set ......................................... P/N 05-06472 .............$39.50 3/8 Fitting Set ........................................... P/N 05-06473 .............$50.50 1/4 Large Fitting Set ................................. P/N 05-06474 ...........$108.95
157
Install between fuel tank and engine. A few squeezes prime your engine for easy starting. Primer Bulb 1/4 Tube Fit - Sm. (5 x 1-1/4) P/N 05-01046 .......$5.25 Primer Bulb 1/4 Tube Fit - Lg. (7 x 2) .....P/N 05-03690 ..........$16.80 Everything you need to add a plunger-type primer system to your aircraft. The kit includes the plunger, a reducer T fitting, 1/8 barb T fitting, and 10 feet of 1/8 pink urethane fuel line. P/N 05-01047 ...........................$22.75 Formerly manufactured by Gerdes Products, this primer has an anodized, all aluminum body and an engraved aluminum knob. The inlet and outlet ports are located on the back end of the pump and both are 1/8 pipe thread. Overall length is 4 and weight is 3.5 oz. New manufacture. ....................P/N 05-19920 ...........$122.95 This primer, originally produced by Kohler, is positively leak-proof. Its exceptional priming ability has made it popular with manufacturers of general aviation aircraft. Has 1/8 internal pipe thread inlet and outlet ports. Overall length 3-7/8. Wt. 2.3 oz. New manufacture. P/N 05-01048 .........................$248.95
PRIMER BULB
PRIMER KIT
ACS PRIMER
This aluminum handle is specially machined to fit the Allen fuel valves above. P/N 05-01915............. $32.85
ESSEX PRIMER
This set of fittings are used to make an extended handle shaft for the Allen fuel valves. One of the fittings fits on and clamps to the valve and the other one fits in the handle. The fittings are then welded in a piece of 3/8 x .035 4130 tube. The handle extension can be made as long as desired. P/N 05-01916 ......... $94.50 Designed for tank installation, with built-in filter. 90 rotation for ON-OFF. Has standard 1/4 barb outlet tube. P/N 05-01040 .............. $14.80 Designed for tank installation. Similar to above but without built-in filter. 90 rotation for ON-OFF. Has standard 1/4 barb outlet tube. P/N 05-01041 ................ $6.50 Twin-tank fuel selector valve. 3 positions: LEFT-OFFRIGHT. LEFT and RIGHT positions are 90 either side of OFF. Panel mount. P/N 05-01042 ................ $7.50 Panel mounted fuel on-off. P/N 05-01043 ............................. $8.75 This can be rotated through 360 then tightened and safety locked. Excellent for applications where space was limited. It can really be described as an adjustable 90 elbow fitting. P/N 05-29565 ........................... $58.50 Bushed 90 tank fitting with standard 1/4 barb outlet. Requires Rubber Bushing FTB01. P/N 05-01045 ............................. $1.71
These new electric solenoids are recommended by Co-Z Development Corp. as ideal electric engine primers for homebuilt aircraft. These normally closed 2-way valves are direct acting and have only two moving parts, a viton plunger and stainless steel spring. Can be installed in any position and are easy to inspect without removing from the line. Pipe size is 1/8 NPT. Orifice dia. 1/8. Wt. 5 oz. #1 port is out, #2 port is in. Will handle max. PSI of 60. Mounting Bracket - A universal stainless steel mounting bracket for the 1/8 NPT valves may be ordered separately. The mounting bracket can be assembled to the valve body utilizing the body mounting holes 2V Solenoid VLV 20CC02PV4B2A .......... P/N 05-04368............. $56.85 24V Solenoid VLV 20CC02PV4B2B ........ P/N 05-04369............. $59.50 Solenoid Mounting Bracket 4K007 ........... P/N 05-04370............. $12.25 Restoring primer pump operation - The kit is replaces the worn O-rings (2) on the primer pump used on non-fuel injected engine installations. The primer seals frequently are not re-lubricated until someone complains the primer isn't working or the engine is hard starting. This is most evident by the pump being hard or stiff to operate. Generally speaking, by the time the pump stops performing, the seals are worn (to the point that lube is of little value) and must be replaced. The kit contains the two O-rings, a packet of Seal Lube, and detailed instructions. P/N 05-03637 ........................$7.95 Polyurethane tubing, translucent blue in color. 1/4 ID. A superior, premium grade of urethane, the optimum material for ultralight fuel line. (Min. order, 4 ft.) P/N 05-01049 ................$1.25/ft. Polyurethane tubing, translucent pink in color. 1/8 ID. For primer systems. P/N 05-01050 .............. $0.66/ft. Connects engine pulse outlet to fuel pump pulse inlet. Outside Diameter: 3/8. Inside Diameter: 1/4. Thickness of the Wall: 3/32 P/N 05-01063 ................ $0.99/ft.
FUEL LINE
05-01036
Complete sets are furnished with both male and female units. Available in both panel mount (left) and in-line (center) styles, with or without internal automatic fuel shut-off. (1/4 tubing). The O-rings may not be compatible with some alcohol based auto fuels. In-line with shut-off P/N 05-01035 .......................................$12.95 In-line without shut-off P/N 05-01036 .........................................$5.50 Panel mount with shut-off P/N 05-01037 .......................................$18.50 Panel mount without shut-off P/N 05-01038 .......................................$15.75 of Delrin.
Perfect for feeding from 2 tanks, or for feeding two carburetors from 1 tank. All have standard barbed ends. Made T type, 1/4 ......... P/N 05-01051............$1.15 Y type, 1/4 ......... P/N 05-01052............$1.10 T type, 1/8 ......... P/N 05-01053........... $1.95 Required for installation of Fuel Flow Elbow described above. P/N 05-01039 .....................$0.88
05-01038
RUBBER BUSHING
158
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
GoatThroat Pumps have been in the industrial market for 15 years. Recently introduced to aviators, these pumps deliver fuel efficiently and directly to the filler downspout with a finger controlled discharge nozzle. Made of chemical grade polypropylene, GoatThroat Pumps can pressurize any container in seconds. Internal pressure relief valve opens at 7 psi, but 2 psi is all you need to deliver fuel safely to your plane. A drip-proof faucet dispenses small amount or gives steady flow. Containers remain upright, so there is no extra handing and little chance for accidental spills. Includes the fitting for a 55 gal. drum. 5 gal. can fitting sold separately. Fuel Transfer Pump.......................................... P/N 05-02196 .. $173.65 Adapter for Blitz 5 gal. can ............................... P/N 05-02197 .... $39.90 Adapter for Scepter 5 gal. can ......................... P/N 05-03031 .... $49.75
CLEAN FUNNEL
Clean Funnel is the funnel that keeps itself clean. Replacing the caps on each end after each use prevents left over fluid from dripping out, and keeps your work area or baggage compartment clean. No need to wipe your funnel out with a rag before reusing. Clean Funnel is ideal for use with fuel or oil as well as windshield washer fluid, detergents, antifreeze, hydraulic fluid, and more. Great for aircraft, automobiles, motorcylces, tractors, boats, ATVs snowmobiles, and more.
model 112
model 415
Model 112 (turquoise) has a 1 pint fluid capacity and a 12 vinyl tube attached to its spout, making it very handy to reach into small or tight spaces.
Model 415 (red) has a 1-1/2 quart capacity, 17 long with flexible spout, and spout I.D. is 9/16.
Scepters Flo n go Superflo fuel siphon pumps gas for easy, clean fill-ups in hard-to-reach fuel tanks. At-the-handle pump control allows for auto shut-off and restarts, as well as clean, hasslefree siphon control. The Superflo model is ideal for smaller engines including lawnmowers, trimmers, chainsaws, generators, blowers, edgers, snow throwers, or any small engine that requires refueling. The Superflo delivers a flow rate of 1 gallon (3.7 L) per minute when in siphon mode. Child safety lock included. PN 05-04568 ...................$63.00
FLO-N-GO SE PUMP
model 428
Model 428 (black) has 1-1/2 quart & 13-1/4 long with a flexible spout and 1-1/8 O.D. spout. Model # 112 415 428 Color Turquoise Red Black Part No. 12-00374 12-00375 12-00376 Price $6.75 $7.95 $7.95
159
FUEL CAPS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Pressure fuel caps are recommended for aerobatic installations. These caps are made with Buna-Nitrile gaskets for fuel resistance. These caps are non-vented for gravity fuel systems. It is highly recommended that a #40 (3/32) drill is used to drill a vent hole through the lower base plate and stud assembly using a drill press. Part No. Diameter (I.D.) Height Price Each 05-18399 1-3/4 -$115.95 05-18400 2 1-3/16 $48.50 05-18402 2-1/2 1-3/16 $41.40 This fuel selector plate is billet machined and anodized, with the text engraved on the plate. It is an efficient one piece design which is easy to install and factory guaranteed. FAA/PMA approved. Cessna 172 - 37 Gals. ......P/N 05-00227 ....$52.95 Cessna 170 - 37 Gals. ......P/N 05-00899 ....$61.95 Cessna 172 - 36 Gals. ......P/N 05-00901 ....$59.95 Cessna 180 - 55 Gals. ......P/N 05-00902 ....$52.95 Cessna 180 - 60 Gals. ......P/N 05-00903 ....$52.95 Cessna 180 - 79 Gals. ......P/N 05-00904 ....$52.95 Cessna 172 - 84 Gals. ......P/N 05-00905 ....$52.95 Cessna 182 - 55 Gals. ......P/N 05-00906 ....$59.95
The ACS Twist-To-Lock Flush Fuel Cap Assy is machined from 6061 aluminum billet. The cap is available in vented and non-vented configurations. The sealing element for the cap is an easily replaceable viton O ring. The bottom of the cap is secured to the bottom of the ring by a safety chain to prevent loss of the cap during flight. The mounting ring may be welded, riveted, bolted or molded onto the tank. ..............................Complete Set (non-vented) P/N 10600 ...................................................$53.75 Complete Set (vented) ........................P/N 10610 ................ $57.75 Replacement ORing .........................P/N 10609 .................. $3.95 This latest modification of the ACS Flush Fuel Cap (unvented) utilizes a Viton O-Ring as the sealing element between the cap and mounting ring. The Viton O-Ring is compatible with aviation fuels and auto gas. The cap with Viton seal is interchangeable with the old-style cap with rubber gasket. Machined from solid aluminum. Ring may be welded, riveted, bolted or molded to the tank. The bottom of the cap is secured to the bottom of the ring by a safety chain to prevent loss of the cap in flight. Mounting ring flange is 1/8 thick. Ring opening is 2-5/8 dia. Overall dia. 4-3/8. Complete Set (New-Style Cap w/Mounting Ring) P/N 05-01390 ................$46.25 New Style Cap Only .............................. P/N 05-01391 ................$39.95 Replacement VitonO-Ring (for New-Style Cap Only) P/N 05-01392 ..................$7.70
This fuel mat by Aviation Laboratories is made from heavy duty durable synthetic rubber. They are non-static and fuel resistant. Available with a center hole or a top offset hole. Size is 24 x 16, with a 4 diameter hole.
AVMAT-AVGAS1 (Top Hole) P/N 13-03588 ......................$83.50 AVMAT-AVGAS2 (Center Hole) P/N 13-03589 ......................$83.50 AVMAT-JET1 (Top Hole) ................................ 13-04925 ..............$83.50 AVMAT-JET2 (Center Hole) ............................ 13-04926 ..............$89.75
Piper PA 23 fuel cap part number CA16097N is an improved version of part number CA16097. This new part uses an improved elastomer with superior fuel resistance. The fuel cap is eligible for PA23 aircraft. P/N 05-04161 ...............$89.95 The 2 inch Piper PA-23 fuel caps are back. PMA Products, Inc. announced the return of their CA17672N fuel caps that are manufactured with improved rubber specifically formulated to prevent swelling. This part number replaces Piper part numbers 454-084 and 17672-000. Specifications: FAA-PMA Approved. Eligible Aircraft: Piper PA-23 (Beginning S/N 23-1, Ending S/N 23-1182) Piper PA-23-160 (Beginning S/N 23-1177, Ending S/N 23-2046). .......................................... P/N 05-06466 ............$140.95 Replacement fuel cap seal part number CA38241 has added eligibility for the Cessna Citation 525, 650, 680 and 750 aircraft. It is also approved for Beechcraft aircraft. This seal fits fuel caps with part number 991410613. Ideal and inexpensive! Dont pay $750.00 for a fuel cap when you only need to replace the seal! P/N 05-04162 ...............$49.75
While most FBOs do a great job of keeping fuel orders straight, mistakes can and do happen. As for pilots, sometimes its not feasible to stand around waiting for the fuel truck to ensure the right fuel is being poured into the aircraft tanks. FuelTape is a highly durable, weatherproof masking tape that clearly indicates to the fueler which grade of fuel must be used. Simply tear off a piece and stick it over the fuel caps and you have a low-cost, reliable system to keep your tanks safe. FuelTape is available in both 100LL or Jet A versions. The colors and design conform to FAA standards. FuelTape is a simple product that both eliminates mistakes and gives the pilot piece of mind that they can go off and handle other business. Sold by the roll. Av-Gas............................................................. P/N 05-06416 .........$7.25 Jet-A ................................................................ P/N 05-06417 .........$7.25
FUELTAPE
The UD-3 flush fuel cap assembly is an unvented cap similar in design to the #5 style cap. The aluminum mounting ring has a 2 dia. opening and an overall dia. of 3-3/4. It may be riveted, bolted or molded to the tank. It is currently used on many popular homebuilts such as the RVs, Lancair, Velocity & White Lightning. Specify flat or contoured adapter. UD-3 with Flat Adapter.......................... P/N UD-3-F ............... $44.85 UD-3 with Contoured Adapter ............... P/N UD-3-C............... $43.50 Usher O-Ring 2-325 Large.................... P/N 05-02146.............. $1.65 Usher O-Ring 2-012 Small .................... P/N 05-02147.............. $0.95
160
FUEL CAPS
These English fuel caps are used on most of the worlds super cars, bikes, and aeroplanes. They are beautifully made in forged and bright anodized aluminum. The high precision and easy to operate mechanism is very secure and non vented. They are designed to keep the fuel in and the water out. The lock is there to ensure that your tank is free from contaminants. Aero caps are used on Cirrus, Diamond, Cessna Corvallis, Lancair kits, Nemesis, Vans, Velocity and many more aircraft. Cap assemblies come complete with cap, gasket, and flanges as ordered. Two keys come with the locking version. Fixing can be by rivet, bolt, weld or glass in as appropriate. These are flush caps of outstanding quality which are ideal for virtually any homebuilt aircraft. Order the attach ring separately as needed. The 300 Series is 3-3/4 OD opening 1-3/4, 6 hole 3 pcd. C37 fits 2 and 2.25 Hoses. A512 & A508 CAPS 3 entry/ 5.5 OD. Feature special surface seal to avoid water/ice ingress. For Avtur Jet and diesel fuels. Glass-in also avail.
Description A36L Locking Cap Assy. 6-hole A36LFF Locking Cap Assy. Glass in A37L Locking Cap+ Hose Fitting 6 hole A37LFF Locking Cap Flush Glass in A36S Non-Locking Assy. 6-hole A36SFF Non-Locking Flush Glass in Cork Gasket for the A36S A37S Non-Locking+ Hose Fitting 6-hole A37SFF Non-Locking Flush Glass in + Hose Fitting R36 Attach Ring + Screws A512L 3 Cap, Locking - 12 hole A508L 3 Cap, Locking - 8 hole A512FF Locking (Glass-In) Cap P/N Price ea. 05-28651 $169.50 05-28652 $139.50 05-28653 $176.95 05-28654 $158.95 05-28656 $128.95 05-28658 $159.50 05-04537 $5.85 05-28659 $158.50 05-28657 $141.95 05-28661 $35.75 05-00045 $212.95 05-04538 $217.95 05-02650 $199.50
Locking bayonet type cap with gasket, fastens to filler neck with safety chain. Externally threaded to mate with tank flange. 1.5 dia. filler hole, 2.25 diameter at threaded base, 1-3/8 neck length. Complete with aluminum tank flange designed for welding to aluminum tanks. Inner surface threaded to receive filler neck. Not compatible with auto gas. Complete Set with Unvented Cap...........P/N 05-17800 ...........$38.65 Complete Set with Vented Cap...............P/N 05-17900 ...........$39.85 Aluminum Tank Flange ...........................P/N 05-01056 ...........$12.25 Cap Only (unvented) ...............................P/N 05-01057 .............$9.50 Cap Only (vented) ...................................P/N 05-01058 ...........$11.75 Gasket for above Caps ...........................P/N 05-01059 .............$1.95 Filler Neck ...............................................P/N 05-01060 ...........$15.90 Tired of hard to open gas caps and caps which leak? These retrofit gas caps offer easy fingertip action and secure sealing.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
VANS RETROFIT AERO 20L CAP - Flush fitting key action cap assembly
fits inside existing Vans flange. Easy action and secure seal. P/N 05-01006 ..... $104.95 This cap has secure sealing and easy finger tip operation. These caps are made from the highest quality modern engineering plastics with Viton o ring seals (which can be easily replaced if you should ever need to do so.) The mounting ring is anodized aluminum with the flange recessed SPRL-S-GS to give a perfect flush fit whether it is riveted under a metal skin, as in the RV series, or built into a composite structure. This cap is non vented and recommended to keep the fuel in, the water out and in the locking version, other unwanted items out of your tank. Size: 65 mm O.D.; Wt: 80 grams. SPRL caps are used SPRL-S on Europa, Compair, Glasair, lancair, Murphy, OMF, Rocket, velocity, Zenith and many more experimental aircraft. Non-Locking cap W/ Flush Flange SPRL-S ...... P/N 05-28662 ....$61.50 Locking cap W/ Flush Flange SPRL-L .............. P/N 05-28663 ....$78.85 Cap with Threaded Flange SPRL-G/S .............. P/N 05-28666 ....$64.75 Locking cap with Threaded Flange ................... P/N 05-28667 ....$89.50 Backnut to secure threaded flanges to skin (for 2.25 hose) P/N 05-00042 ....$10.85 Sprl Fuel Cap O-ring Kit .................................... P/N 05-02611 ....$14.75 A30-CIR is a screw threaded fuel cap the will fit almost flush to a skin, with the riveted flange on an adjacent tank or the back of a wet skin. This was designed to be fitted after painting, reducing the likelyhood of dirt/dust in the cap and the cost of masking/finishing operations. It is available with a locking or non locking cap. A30 L-CIR Locking ........................................P/N 05-06838 .......$146.95 A30 S-CIR Non-Locking ................................P/N 05-06837 .......$128.95 Rivet Flange for threaded A30 fuel caps P/N 05-06491 .........$69.85
604 Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 604 lock. P/N 05-03437 ...................... $9.95 605 -Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 605 lock P/N 05-04540 .................... $22.50 606 Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 606 lock. P/N 05-03388 .................... $22.50 607 Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 607 lock. P/N 05-03389 .................... $17.90 608 Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 608 lock. P/N 05-04541 .................... $15.25 609 Newton Fuel Cap Keys - Fits all Newton Fuel Caps with a 609 lock. P/N 05-04542 .................... $16.75
The unvented flush fuel cap operates with a lift and turn lever. This cap has a 3 opening for easy refueling. Cap & adapter ring are anodized clear for corrosion resistance. Cap is fastened to adapter ring with safety chain. Made in the U.S.A. 10700 Flush Fuel Cap ....P/N 05-04702 .......$349.50 Replacement O-Ring 10700 CAP .................P/N 05-04703 ...........$4.85
161
For diesel and jet fuel. Recommended in many operating manuals as the preferred, industry standard fuel additive for eliminating Hydrocarbon Utilizing Micro-Organisms (HUM Bugs) in fuel tanks. US Coast Guard Certified and is the only diesel additive that has been given a military MIL Spec number. 4 oz. .................... P/N 05-06865 ....................$16.95 16 oz ................... P/N 05-04963 ....................$18.85 1 qt. ..................... P/N 05-04962 ....................$28.50 1 gal .................... P/N 05-04961 ..................$115.95 5 gal .................... P/N 05-04960 ..................$515.00 55 Gallon ............ P/N 05-06866 ...............$3,673.00
PRIST HI-FLASH LO-FLO ANTI-ICING FUEL ADDITIVE Hi-Flash Hi-Flo vs. Hi-Flash Lo-Flo Whats the Difference? The two products are identical in chemical formula. Hi-Flo additive simply means the can delivers the product at a rate compatible with a 40 to 55 gall per minute fuel nozzle rate. Lo-Flo additive can deliver the product at a rate which is typical of avgas, which is 15 to 20 gallons per minute. LoFlo is also used in helicopters, which typically have to be fueled slowly. 8 oz. can ................... P/N 09-02048 ............. $6.95 Case (24 Cans) ......... P/N 09-02048-1...... $174.95
Turboline FS100 is a high-temperature fuel stabilizer and detergent additive designed to minimize carbon or coke deposits in turbine fuel combustion systems. Turboline FS100 is readily soluble in jet fuel. Batch blending into the fuel is acceptable, but the best procedure is proportional injection. Turboline FS100 is completely compatible with other fuel system additives such as FSII and Biobor JF. Turboline FS100 is fully approved for all operators using GE, Pratt & Whitney, Honeywell and all variants of the Turbomeca Arriel 1 & 2 engines. Operators with other Turbomeca engine models and Rolls-Royce can obtain approval on request. Please contact your local FAA authority, international authority, or OEM if you have specific questions concerning your equipment. Recommended Treatment Level for Turboline FS100 The optimum treatment level in the fuel is 625 ppm (vol). This treatment level equates to about 80 oz. of product for every1,000 gallons of fuel. Gallons of Jet Fuel x .000625 = Gallons of Addtive Gallons of Additive x 128 = Ounces of Additive. 16 oz. .................. P/N 05-06870 ....................$52.00 5 Gallon .............. P/N 05-06871 ...............$1,055.00 55 Gallon ............ P/N 05-06872 ...............$9,678.00
Designed to improve fuel lubricity and reduce fuel system wear. Applications LubriBor is specially formulated for use in lowsulfur diesel fuel, now required for all over-the-road vehicles, and may be used in other applications such as boating, industrial and construction equipment, mining and farm equipment. 16 oz ................... P/N 05-06867 ....................$23.50 5 Gallon .............. P/N 05-06868 ..................$279.95 55 Gallon ............ P/N 05-06869 ...............$2,176.00
The Hum-Bug Detector Kit is a low-cost, easy-to-use early warning system that will effectively identify hydrocarbon utilizing micro-organism contamination in all hydrocarbon fuels and oils. P/N 05-04964 ...............$21.75 Pro-Seal and similar products are two-part polysulfide integral fuel tank and fuselage sealants. We offer a Pro-Seal equivalent which is a B-2 type material and meets specification MILS-8802E, Type II, Class B-2. These kits are packaged in poly bags with nozzle, plunger and instructions. 2oz. sealant....................... P/N 09-38500 ......................$16.85 3-1/2 oz. sealant ............... P/N 09-38510 ......................$17.95 Accessories Nozzle for Pro-Seal Kits ................... P/N 02-00099 ........................$1.20 Economy Sealant Mixer ................... P/N 12-01792 ......................$16.85
Discount Schedule: Less 10% on 12 kits, less 15% on 20 kits (may be assorted).
These hand-operated dispensing guns are ideal for applying Pro-Seal type sealants in small quantities normally used by the home builder Available in two sizes for the two sizes of Pro-Seal offered above. 2-1/2 oz. Dispensing Gun................. P/N 09-38520 ............. $110.95/ea. 6 oz. Dispensing Gun ....................... P/N 09-38530 ............. $112.95/ea.
FUEL FRESH
The Pro Seal Air Powered Sealant kit includes: Techcon TS950 Sealant Gun with Pistol Grip Handle 2.5 oz. Versatile, pneumatic 2.5 ounce sealant applicator system with pistol grip handle. Techcon Extended Wiper Plunger (1 piece per kit) Techcon 2.5 Oz. Standard Density Disposable Cartridge (1 piece per kit) Opaque White Air Powered 2.5 Ounce Gun Kit ..................P/N 09-38540 .........$516.00 Air Powered 2.5 Ounce Gun Only...............P/N 09-38542 .........$516.00 Extended Wiper Plunger (Sold Each) .........P/N 09-00758 .............$0.67 2.5 oz. Std. Density Disposable Cartridge ..P/N 09-00759 .............$0.85
162
A two-part, polysulfide based product for use as a quick cure sealant for integral fuel tanks and fuselages. A thixotropic nonsag consistency and can be readily applied with a spatula or extrusion gun or vertical surfaces. It will cure to a fuel-resistant rubber at temperature above 20 degrees F and exhibits excellent tooling properties with very low shrinkage.
Class B-1/2 B-1/2 B-2 Size Pint 6 oz. 6 oz. Part No. 09-02634 09-02635 09-02638 Price $57.75 $29.00 $29.75
CM WP ME HA AP LG EP CS IN EL
PR-1776M Class B is a low density, high temperature aircraft integral fuel tank sealant. Service temperature range from -65F (-54C) to 250F (121C), with very limited excursions up to 360F (182C). Designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. Cured sealant maintains excellent elastomeric properties after prolonged exposure to aircraft fuels both jet fuel and aviation gas, and will resist limited contact to diphosphate ester based hydraulic fluids. Two-part, manganese dioxide cured Permapol P-5 modified polysulfide. Suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant. Shelf Life: 9 months .........P/N 09-02003 ........$312.95 A aircraft integral fuel tank slosh coating designed as a topcoat or barrier coating, cured to resist prolonged exposure to both jet fuel and aviation gas. It has a service temperature range from -100F (-73C) to 250F (121C), with intermittent excursions up to 275F (135C). PR-1005-L is a one part, synthetic rubber solution.Suitable for application by brush, fill-and-drain, dip, or spray. It cures at room temp. Test results are in accordance with MIL-S-4383 specification test methods. Color: Red; Dry time(77F): 20 mins.; non-toxic. Pint .......... P/N 09-00323 ... $107.95 Quart ....... P/N 09-00324 ... $207.50
A 100% solids epoxy system. It contains no solvents and no corrosive or carcinogenic substances to assure low toxicity and ease of application. Provides superior low temp. curing, impact and abrasion resistance, and cures in the presence of moisture or humidity. Brushes on easily. One 3 gallon kit can coat tanks of average size homebuilt. Note: Jeffco Fuel Sealer 9700 FCR(Part Number:09-42226) is made up of 2 parts. Part A and Part B. They both can be sold seperately. Part A is Part number:01-01062 and Part B is part number: 01-01063. 3 Gal Kit............................................P/N 09-42226 ....................$544.00
Fuel Tank Sealant Single Phase (one-part) A long lasting, permanently flexible Single Phase Polysulfide Sealant. Tackfree in 1 to 3 days, excellent resistance to oils, gasoline and diesel fuel Ideal for fuel tanks; cures to a firm flexible rubber seal with excellent adhesion qualities, can also be sanded and painted. ........................................ P/N 09-02544 ........... $8.95
C-236 Class A is a brushable, two-component, liquid polysulfide polymer system providing excellent fuel tank and fuselage seals. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals and petroleum products common to the aircraft industry. Maintains its flexibility and bond strength on most metal substrates like aluminum, stainless steel, steel, and many coatings under extremes of temperature, weathering and stress. Pourable liquid easily applied by brush. It has excellent tooling properties.
Class A A-2 A-2 Size Pint Pint 6 oz. Part No. 09-02614 09-02618 09-02619 Price $53.50 $52.50 $26.25
A long lasting, permanently flexible Dual Phase Polysulfide Sealant. Fast curing two part system where time of completion is the criteria; cures to a firm flexible rubber seal with excellent adhesion qualities. Excellent resistance to oils, gasoline and diesel fuel; ideal for fuel tanks, cures to a firm flexible rubber seal, a product more for the professional than the home builder. Approximately 45 minute application time. Sealant............................ P/N 09-02543 ......... $38.75 Empty 5.5oz. Cartridge ... P/N 09-02545 ........... $1.95
A two-component, manganese dioxide cured, liquid polysulfide polymer system providing excellent fuel tank and fuselage seals. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals and petroleum products common to the aircraft industry. Maintains its flexibility and bond strength on most metal substrates like aluminum, stainless steel, steel, and many coatings under extremes of temperature, weathering and stress. A thixotropic paste easily applied by extrusion, injection gun or spatula. It has excellent tooling properties.
Class B-1/2 B-1/2 B-2 B-2 B-2 B-4 B-4 Size 6 oz. 25 grams Pint 6 oz. 25 grams Pint 6 oz. Part No. 09-02623 09-02625 09-02626 09-02627 09-02629 09-02630 09-02631 Price $26.50 $27.75 $52.50 $27.25 $10.85 $52.50 $26.25
Formulated especially for fiberglass and composite Aircraft. LifeSeal offers a fast-curing, low odor, high adhesion, nonsagging, non-corrosive, non-yellowing formula. Permanent watertight seal for joints subject to structural movement. Will adhere to metal, glass, wood, Lexan, ABS and certain other products. Can be removed without damaging the aircraft finish is mildew resistant and Acid Free. LifeSeal packaged in half cartridges for convenience of working. Aluminum ........................ P/N 09-02540 ........... $8.35 Clear ............................... P/N 09-02541 ........... $7.45 Black ............................... P/N 09-02542 ........... $8.95
AV TO PS
This is impervious to all fuel types. Over 2,000,000 sold to date. It is the best way to repair and restore your fuel tank. Simple application, includes extensive application information and product information sheet. Will seal pinhole leaks and prevent rusting. 1 Pint will seal a 10-12 gallon tank. Good for all fuel types. Works well with all metal and fiberglass tanks. Note: For Experimental Aircraft Only! Quart ............................... P/N 09-03477 ......... $25.50 Gallon ............................. P/N 09-02566 ......... $83.50
BV
The application life of each sealant is specified by the dash number in the part number. Examples: AC-236 B-2 6oz. is 2 hour life. AC-250 B-1/6 2oz. is 1/6 hour life.
163
CORROSION TREATMENT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ACF-50 is a state-of-the-art compound for controlling corrosion on aircraft electrical and avionics systems and airframes. ACF-50 is designed for owners of strut equipped Piper aircraft to comply with new Piper bulletin 5280C requiring lift strut inspection. ACF-50 kills the corrosion process with just one application and will last for 24 months. Microswitches, cannon plugs, and relays will remain corrosion free. Plus, ACF-50 will easily free seized nuts, screws and bolts. ACF-50 is qualified under MilPRF-8130F, and manufactured under ISO 9000 Certified Processes. Try ACF-50, you will be truly amazed at the results. 13 oz. Spray Can(HAZMAT) ......................P/N 09-44350 .......... $11.95 32 oz. Bottle ...............................................P/N 09-00364 .......... $29.85 4 Liter can ...............................................P/N 09-44345 .......... $90.25 20 Liter Pail ...............................................P/N 09-00437 ........ $429.00
Black Bear Par-Al-Ketone is best known as one of the most rugged corrosion preventives available, performing successfully for over 40 years protecting aircraft components and machine parts in outdoor storage and for export. Qt......................P/N 09-26800 ...........$18.85 Gal. ...................P/N 09-26900 ...........$59.75
PAR-AL-KETONE
Corrosion X is an excellent penetrant, lubricant, and corrosion filter which confirms to Mil-C-81309E and is perfect for extended corrosion protection of airframes. It is also highly effective in protection of all components in the electrical / avionics systems. On existing corrosion, it penetrates oxidation, displaces lectrolyte and stops electrolysis. On corrosion free surfaces provides an ultrathin barrier to guard against moisture intrusion and corrosion attack. Treatment lasts 2 years or more, and Corrosion X is non-toxic. Corrosion X is a highly recommend treatment for extending the life of airframes. 16 oz. Aerosol ........................P/N 09-42220 .......... $15.26 16 oz. Trigger spray (can be shipped anywhere nonhazardous, unrestricted) ........P/N 09-00296 .......... $15.25 1 gal./3.8 ltr. ...........................P/N 09-44225 .......... $84.15
CORROSION X
Developed this formula for long term protection of aircraft components. Penetrates to fasteners and fixtures, where it displaces moisture, and will even loosen rusted parts. Boeing recommends it for fuselage, wing, and tail structures, engines and cowlings, landing gear and gear wells, control linkages, and avionics. Dries to a clean waxy film. Lubricates and protects all metals for months. Safe on most paints, plastics & vinyls. 12 oz. Aerosol can ..... P/N 09-01623 ......... $15.75 4 oz Drip Can ............. P/N 09-00378 ........... $7.85
4 oz Spray Can ........P/N 09-00379 ........ $7.45 Gallon Can ...............P/N 09-01622 ...... $99.00
Prevents rust and corrosion inside aircraft tubing structures. Tubeseal is a blend containing a very fine preservative oil (MIL-L-21260) which has a characteristic of climbing the tube wall and spreading over the entire surface to provide lasting protection. Penetrates and reveals very small pin holes in a weld and in time, due to exposure, congeal and seal the hole. 1 quart will treat 2 light aircraft fuselages. Complete instructions on label. Qt..................... P/N 03-14000 ...........$26.00 Pt. .................... P/N 03-14005 ...........$14.00
These pressure sprayers are excellent for applying Corrosion X and require no special training to operate. compact, convenient and easy to use, these sprayers have no moving parts and operates at 80 PSI shop air. At such a low CFM even some inexpensive diaphram compressors can deliver adequate power. Furnished with instructional video. Available in 3 sizes.
A grease-like silicone material which provides a moisture proof seal for ignition and electrical systems. More water repellent than waxes. Effective from -70 to 400 F. A low-loss dielectric.
Meets spec. MIL-I-8860. 5.3 Oz. Tube ..............P/N 09-27700 .......... $14.85
ECK is a coating used to prevent dissimilar metal corrosion of all metals including stainless steel, aluminum, copper, brass, cold rolled steel and black oxide. ECK prevents corrosion by providing a barrier between dissimilar metals, sealing out moisture and absorbing energy created by a dissimilar metal reaction. Product can be applied by aerosol or liquid on an unpainted or painted surface. Once applied the coating does not need to be reapplied during routine maintenance. ECK is dielectric and can be used on electrical connections. Size is 3.75 oz. P/N 09-02138 ..............$8.95
Pliobond #20 is a viscous, quick setting highly versatile adhesive. Bonds metal; wood, plastics, fabrics; ceramics, glass, vulcanized rubber, paper, leather and concrete. Thin with MEK. Available in 1/2 pint, pint, and quart sized. #PBC-20,1/2pt BrushTop Can P/N 09-28000 ...........$8.50 #PC-220, Pint P/N 09-28100 .........$13.85 #PC-320, Qt. P/N 09-28200 .........$23.75
PLIOBOND
A one part RTV paste which cures at room temp. to a tough rubbery white solid. Used for bonding, sealing and caulking where resistance to fuels, oils and solvents is required. Excellent on fuel line pipe threads, repairing fuel lines and tanks, bonding components exposed to fuels, oils & solvents. temp. range -85 to 400F. Stores refrigerated for years. 3 oz. tube............P/N 09-00383 ..........$93.75
General-purpose single-component silicone rubber. Adheres to metals, glass, paint, ceramics, most plastics, and wood. Cures to a firm silicone rubber in 24 hours at room temperature. Seals windshield glass, windows, repair worn rubber parts. #732 RTV (Clear), 4.7 Oz. Tube .................P/N 09-27800 ............$7.95 #732 RTV (White), 4.7 Oz. Tube ................P/N 09-27810 ............$6.95 #732 RTV (Black), 4.7 Oz. Tube ............ P/N 09-27815 ......... $6.95 #736 Red Silicone, 3 Oz. Tube .............. P/N 09-27900 ....... $11.50
164
WHIRLWIND PROPS
CM WP ME HA AP LG
65 lbs Aerobatic Governor P-940 Gray or White Composite 14
The 200C Series system consists of 2 carbon fiber blades with nickel leading edge erosion shields, aluminum hub and a composite spinner. This propeller is counter-weighted to prevent engine overspeed. This propeller can be flown in rain and off unapproved airstrips. Performance & Quality. This 200C Series propeller has been designed to maximize the aerobatic performance of your airplane! The exceptional performance is derived from advanced engineering developments, including the use of our latest airfoils. The 200C Series is a two-blade hydraulic constant speed propeller system designed for aircraft using the Lycoming IO-360 engine (180 - 200 hp). P/N 05-00568 ........................$9,960.00
The new 400C Series system consists of three carbon fiber blades with nickel leading edge erosion shields, aluminum hub and a composite spinner. This propeller is also counter-weighted to prevent engine overspeed. This propeller can be flown in rain and off of unapproved airstrips. Experience the exceptional performance of the 400C Series propeller system. Like the 200C Series, performance is derived from advanced engineering developments, including the use of our latest airfoils. The 400C Series is a three-blade hydraulic constant speed propeller designed for aircraft using the Lycoming IO-540 engine (260 - 300 hp). P/N 05-00569 ..................... $13,040.00
SPECIFICATIONS
Prop Model#: Engine Type: Engine HP: Max RPM: # of Blades: Diameter: 7755/C214 Lyc. O-360,IO-360 180 - 200 hp 2700 RPM 2 77 System Wt: Function: Control: Finish: Spinner: 47 lbs (213 Kg) Aerobatic Governor P-940 Gray or White Composite 13,14 Prop Model#: Engine Type: Engine HP: Max RPM: # of Blades: Diameter:
SPECIFICATIONS
7855/C415 Lyc. IO-540 260 - 300 hp 2700 RPM 3 78 System Wt: Function: Control: Finish: Spinner:
EP CS IN EL AV TO PS BV
The WhirlWind GA propeller series are ground pitch adjustable aircraft propellers featuring advanced aerodynamic and composite design. The high gloss urethane surface shows off the quality craftsmanship and attention to detail. The blade design is optimized for maximum efficiency and minimum noise. The blade structure is manufactured from theromoset epoxy/graphite composite matrix. This advanced composite structure ensures high strength and blade accuracy in all flight environments. Only WhirlWind propellers come standard with electroformed Nickel leading edge shields for superior fit and abrasion protection. The hub is CNC machined from aerospace aluminum and is dimensionally certified; all hubs are surface treated with shot peen for increased strength and cycle life and then Anodized for corrosion protection. Specifications: Engines: Rotax 912/914, Diameter: 2 blade - 68-70 in. 3 blade - 64-70 in., Weight: 2 blade - 8 lbs.3 blade - 11 lbs., HP/RPM: 115@5800 Description Part No. Price 2 Blade Prop 05-06851 $1,550.00 3 Blade prop 05-06850 $1,525.00 Accessories 9" Spinner For Prop 05-06852 $335.00 9.75" Spinner For Prop 05-06853 $335.00 11.3" Spinner For Prop 05-06854 $335.00
This kit was developed specifically to maintain the propeller and spinner on prop & spinner in pristine condition. P/N 09-23525 .......... $26.95 Perfect for precision setting of all ground-adjustable props, as well as precision alignment of control surfaces. P/N 05-31970 ........................... $37.80
PROP PROTRACTOR
De-icing in under 90 seconds with the push of a button! No Fluids! No Mess! Therm-X Hot Prop is a complete propeller deicing kit made up of Part 23 certified products (no more scrounging parts to build system) Available for 2 blade and 3 blade props (currently Continental only, Lycoming to follow) 12V or 24V 1 year Warranty Installation documentation Manufacturer provides support Weight 4.9 lbs. 2 Blade ..................... P/N 05-03383 ..............$3,685.00 3 Blade ..................... P/N 05-03384 ..............$3,895.00
The O-ring is A1633-11 or PRP909-6; commonly made by Parker Seal Company. Outside Diameter: .048 Length Under Flange: .096 Flange Diameter: .072 P/N 04-04566 .....................$1.47
165
PROPELLER GOVERNORS
CM WP
Manufacturer A governor is defined as a mechanical device which is used to sense the speed of a motive device and maintain its speed using mechanical feedback. Quality Aircraft Accessories has been overhauling Prop Governors for over ten years. Whether your requirement is for a Woodward, McCauley or Hartzell, Quality Aircraft Accessories has most governor models available on an overhaul/ exchange basis. Should you prefer to purchase the Prop Governor "outright", please add the core charge to the exchange price. Overhaul work is preformed by Quality Aircraft Accessories at their facility in Tulsa, Oklahoma. All overhauled Prop Governors are warranted for material and workmanship for a period of 180 days. Part No. Price Core Charge
ME HA AP LG EP CS IN EL AV TO PS BV
HARTZELL
A-SERIES Prop Governor B-SERIES Prop Governor C-SERIES Prop Governor D-SERIES Prop Governor E-SERIES Prop Governor E8-SERIES Prop Governor F2-SERIES Prop Governor F3-SERIES Prop Governor F4-SERIES Prop Governor F6-SERIES Prop Governor F8-SERIES Prop Governor H-SERIES Prop Governor 05-04721 05-04722 05-04723 05-04724 05-04725 05-04726 05-04727 05-04728 05-04729 05-04730 05-04731 05-04732 $1,465.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,275.00 $1,370.00 $1,275.00 $1,000.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00
MCCAULEY
Manufacturer C290D2 Prop Governor C290D3 Prop Governor C290D4 Prop Governor C290D5 Prop Governor DC290D1 Prop Governor DCFS290D7 Prop Governor DCF290D7 Prop Governor DCFTS290D10 Prop Governor DCFTS290D15 Prop Governor DCF290D8 Prop Governor DCFS290D9 Prop Governor Part No. 05-04735 05-04736 05-04737 05-04738 05-04739 05-04740 05-04741 05-04742 05-04743 05-04744 05-04745 Price $1,175.00 $1,274.00 $1,175.00 $1,175.00 $1,175.00 $1,325.00 $1,275.00 $1,465.00 $1,465.00 $1,325.00 $1,326.00 Core Charge $500.00 $500.00 $500.00 $500.00 $500.00 $600.00 $500.00 $600.00 $600.00 $600.00 $600.00
166
PROPELLERS
Powerfin is the only composite propeller manufacturer in the U.S. to offer a true Clark-Y airfoil which optimizes surface airfoil for thrust. Powerfin also allows for infinite pitch range with any increment. The pitch alignment tool supplied with every Powerfin takes the guesswork out of pitching your prop. Simply set the stop screw, clamp the tool to the hub, and turn the blade to the stop. The process takes less than 10 minutes for a 3 bladed prop. Powerfin features include superior aerodynamics, noise reducing tips, superior composite construction, very strong low profile hub, durable finish, 2 and 3 blade configurations, fits Rotax 75MM bolt pattern, adapters for every bolt pattern, 32 to 72 diameter, leading edge protection, speed set hub and a two year factory warranty against defects. Weight is 6.5 lbs. for 2 bladed Powerfin and 9.0 lbs. for 3 bladed Powerfin. Complete brochure available on request. General use propeller although specifically designed to run MODEL B significantly smaller diameters than most other props. The B-Model runs very well on a 582/2.58 as a three blade 60 for example, and can out produce our competition even when running much smaller diameters. Maximum possible diameter with this model is 65. Designed specifically for powered parachutes as a three MODEL C blade 64 on a Rotax 582/2.58, this design works well on Rotax 447s through Rotax 618 as well as the Hirth engines that fall between 40 and 80 horsepower. This is the propeller being sold as standard equipment on 6 of the top 7 ppcs. Maximum possible diameter with this model is 69. This is our smallest propeller - designed for MODEL E engines between 15 and 30 horsepower. These narrow blades allow for a maximum possible diameter of 53. Backpack ppcs are the target of this design although the blade has been proven very efficient on many older, fixed wing airplanes with diameter restrictions. This is the ONLY pitch adjustable prop available to backpack units. This is our largest propel- MODEL F ler - designed for larger two-stroke engines that use the higher gear reduction ratios and horsepower up to 115. This prop runs beautifully on a Rotax 503/3.47 as a three blade 66-70. A two place Kolb cant squeeze any more efficiency out of a 503/3.47 than with our F-model 68 prop. This prop is also the finest prop available for the Rotax 912, 912S, and 914 engines. Maximum possible diameter with this model is 75.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Homebuilt Props by Props Inc. Homebuilt props come with urethane leading edge protection and fiberglassed wrapped tips. Key Benefits: Durable, yet can save tear down cost in the event of a ground strike. Specifically designed for the use. Can be modified for fine tuning. Description VW, Jabiru, Suburu Gyrocopter, Airboats Mac, VW, Suburu C-90, O-200, O-235 O-320, O-290, O-360 Diameters 46 - 58 dia. 48 - 56 dia. 58 - 60 dia. 60 - 72 dia. Price $435.00 $435.00 $1148.00
Specify aircraft type, prop diameter, pitch, bolt pattern, pusher or tractor configuration, and mahogany or birch when ordering any homebuilt propeller. Allow 2-3 weeks for shipment of our custom propellers. Add $30.00 for 3-blade and $50.00 for 3 and 4 blade props-packing and shipping. Maple may be substituted for Birch according to availability. These high quality ultralight propellers are available in both birch and mahogany. The birch props are as split-resistant as mahogany but mahogany props with glass coating are 1/3 lighter than the birch. Mahogany props come with a glass coating - it is optional on birch props. Add $35.00 for leading edge protection on birch or mahogany props. Propeller reconditioning available on all ultralight props. Specify prop dia., pitch, bolt pattern, aircraft and engine type, birch or mahogany, and pusher or tractor configuration. Allow 2-3 weeks for delivery. Prop drilling included in price. Additional $18.00 for packing and shipping. Diameter (Specify) Pitch (Specify) 36 thru 40 Any (to 36) 41 thru 48 Any (to 46) 49 thru 54 Any (to 46) 55 thru 60 Any (to 46) 61 thru 66 Any (to 46) 67 thru 72 Any (to 46) Request quotation on prop pitch over 46 Price for Plain Prop Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote
To calculate the cost of a full propeller assembly, take the price for a single blade times the number of blades you need. Then add the cost of the hub you need.
For example: A three blade C-model propeller assembly will include three C-model blades ($420) and a standard three blade Apex hub ($195). The total is $620. All hub assemblies* include mounting hardware, optional locknuts for Rotax engines, and a 1/4 dowel pin used for setting the pitch.
The cost of each type of blade is the same regardless of the diameter.
BLADES
Blade Model Part No. Single Blade Price B-Model 05-06962 $189.00 C-Model 05-06963 $179.00 E-Model 05-06964 $169.00 F-Model 05-06965 $229.95 *All propeller and hub assemblies include mounting hardware for the Rotax A, B, C, or E box or the Hirth gearbox.
HUB ASSEMBLIES*
Hub Type For Blade Models Special Three Blade Apex E Standard Two Blade Apex B, C, & F Standard Three Blade Apex B, C, & F Standard Four Blade Apex B, C, & F Standard Five Blade Apex B, C, & F Rotax 912 Three Blade Apex B, C, & F Rotax 912 Four Blade Apex B, C, & F Rotax 912 Five Blade Apex B, C, & F Part No. 05-06973 05-06966 05-06967 05-06968 05-06969 05-06970 05-06971 05-06972 Price $289.95 $279.00 $299.95 $325.00 $350.00 $335.00 $350.00 $378.00
DynaVibe is an economical, state-of-the-art dynamic propeller balancer designed specifically for the aircraft industry. DynaVibe displays the magnitude and phase of propeller vibration allowing precise weight adjustments for balanced and smooth engine operation. * Economical - including: Dynamic Balancer Accelerometer with 30 ft cable Optical Pickup and Reflective Tape (Tach) Carrying Case No hidden costs or additional items to buy! * Accurate - Reports RPM, Vibration Magnitude * Results - Reduce vibration for a smoother flight, and decrease mechanical wear of engine and instruments DynaVibe Aircraft Prop Balancer ................P/N 05-04532 ......$1,495.00 DynaVibe Aircraft Prop Balancer with NIST P/N 05-04533 ......$1,644.00 DynaVibe Rotocraft Prop Balancer .............P/N 05-04534 ......$1,995.00 DynaVibe Rotocraft Prop Balancer with NIST .P/N 05-04535 ......$2,190.00 This extremely simple and sensitive tool uses the plum-bob and bevel principle to balance props both vertically and horizontally. It can be carried in a small tool box for easy use in the field and balances props accurately for smooth operation. The precision machined hub works with any prop designed with standard 1 center hole. Illustrated instructions included. P/N 13-17400 ...........$29.50
Shipping a two or three blade propeller assembly is $20.00. These prices are for all U.S. customers excluding Alaska and Hawaii. Most international orders will ship U.P.S. International - Expedited Service. If you wish a quote on an international order, please supply an address with a postal code so we can quote shipping prices.
167
PROPELLERS
PRINCE AIRCRAFT COMPANY P-TIP PROPS MCCAULEY MET-L-PROPS
Original equipment on most Cessna aircraft and popular with owners of many other designs. McCauley has earned an enviable reputation for producing high-performance propellers. Most popular numbers are available from local stock. The Met-L-Prop number designates the model, diameter and pitch. Example: CM7150 is a model CM propeller with a 71 inch diameter and 50 inch pitch. When ordering a new prop which requires a doweled spacer, both spacer and bolt kit are included. Spacers and bolt kits may also be ordered separately. When ordering, specify whether engine has a tapered or flanged crankshaft. Tapered crankshaft requires Kit No.B-4622-6. Flanged crankshaft requires Kit No.B-4622-9. Elliptical tip models 1A90/CF and square tip models 1B90/ CM having the same diameter and pitch are directly interchangeable except for CF7538 on Cessna 150G, H, J and K model seaplanes.
Standrd Cruise Our Engine Climb Prop Prop Prop Price** Beech A23-24 Lyc.I0-360-A2B,A2D BFA7762+ Call Bellanca 7ECA Cont. 0-200A ACM6948+ Call Bellanca 7ECA Lyc. 0-235-C2C CLM7246+ CLM7250 Call Bellanca 7GCA Lyc. 0-320-A2B GM7452 GM7455 GM7450 Call Cessna120,140 Cont. C-85 CM7148 CM7150 CM7146 Call Cessna120,140 Cont. C-90 CM7152 CM7154 Call Cessna 150A-F Cont. 0-200A MCM6950 Call Cessna150G-K Cont. 0-200A DCM6948 DCM6950 Call Cessna 150L Cont. 0-200A OCM6948+ Call Cessna 170A,B Cont. C-145 MDM7655 MDM 7656 MDM7653 Call Cessna 172 Cont. 0-300A,B MDM 7653 MDM7655 MDM7652 Call Cessna 172A-H Cont. 0-300C,D EM 7653 EM7655 EM7652 Call Cessna172I,K,L Lyc. 0-320E2D DTM7553+ Call Cessna 175 Cont. G0-300A,C MFC8467 Call Cessna 175A,B Cont. G0-300C,D MFC8467 Call Cessna 177 Lyc. 0-320-E2D TM7653+ Call Cessna 177A Lyc. 0-360-A2F EFA7656+ Call Great Lakes Lyc. 0-320-E2A EGM 7654 Call Luscombe 8A Cont. A-75 CM7447 CM7449 Call Piper J3 Cub Cont. C-85 CM7144 CM7146 Call Piper PA-18,18A Lyc 0-290-D2 GM8241` Call Piper PA-32 Lyc.0-540-F4B5 PFA8266+ Call Aircraft Model
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
WOOD P-TIP PROPELLER - Before the Carbon Fiber P-TIP Propeller, this had been considered one of the most efficient and lowest noise propellers available; the only wood/carbon fiber anti-vortex droop tipped propeller in the world. This propeller is a wood, fixed pitch propeller that relies on the forward pull of the propeller to automatically provide pitch change proportional to the amount of force being applied to the propeller disk. When a propeller operates at a slower airspeed than its maximum capabilities, it has a proportional pull in relation to the velocity of forward motion, so at takeoff and climbing condition the propeller will have its largest forward pull. Due to the scimitar shape, the tip of the propeller cones forward, as the coning angle changes the propeller will lessen pitch that provides shorter takeoffs and higher rates of climb. As the propeller increases in forward speed the disk pressure is reduced, this forces the propeller to increase pitch and top speed. This change in pitch is approximately four inches from takeoff to cruise. The droop P-TIP is to control the air spillage over the propeller tip that delays the tip vorticies which cause drag and turbulence within the propeller arc. A propeller, like a wing, works best when it has unturbulated air over the airfoil sections. The P-TIP delays the vorticies, the propeller then has smooth air to provide best thrust and a pronounced reduction in propeller noise. Additional benefit of the P-TIP design is the volume of air the propeller produces. When air flows through a standard tip propeller design, the airflow at the tip will flow over the propeller tip. As soon as it passes the tip it will tuck down behind the propeller blade giving a cone of air from the propeller smaller than the propeller diameter. For example, a 72 diameter propeller without a P-TIP will give a volume of air from the propeller of approximately 68 of diameter; a P-TIP propeller will provide 72 of air volume. This means that a 68 P-TIP will give the same volume of air as a standard tip 72 propeller. By reducing propeller diameter there is less frontal area or flat plate drag of the aircraft. Higher top speeds are the result without sacrificing takeoff or climb. Your benefit is a lightweight, pitch changing propeller that will give you the best of short takeoff, maximum cruise, and more flying enjoyment in a quieter cockpit. COMPOSITE P-TIP PROPELLER - Composite P-Tip Props retain the same qualities of the wood P-TIP but are more efficient and durable. Prince uses the reliable time proven wood core of hard maple, then completely encloses the blades in multiple layers of high tensile strength composites. The hardwood core absorbs the dangerous harmonic vibrations and benefits your airframe by smoothing the engine power pulses, and the composite wrapping allows the airfoils sections to be thinner, reducing drag while increasing durability and locks each blade into operating at precise angles. The best working propeller is one that is rigid enough to allow all blades to move alike, thin at the cord section to eliminate as much drag as possible, and strong enough to satisfy the large amounts of stress required during flight. Urea Formaldehyde adhesive meets Military Specifications to insure reliable operation and trouble free flying for the life of the propeller. Propellers are finished in a metal prop gray color, this shade will match nearly every paint scheme, the Durability and Ultrahigh Gloss finish is a two-part Urethane, machine buffed to achieve a propeller that reflects the quality of manufacturing like no other propeller available.
Note:Request Prince Propeller order form at time of order we will fax or mail form to you to complete to insure correct propeller is furnished for you application.
Applications and Prices for some Popular McCauley Props. All Models Available. Prices are the same for all props with the same letter prefix.
These McCauley De-Ice Brush Clusters from Rapco are FAA-PMA approved and are applicable to any aircraft using the McCauley style brush blocks. Two clusters per block are required. Brush clusters with dash numbers require one of each dash number per block.
Installation Cessna: T182 TR182 340A 402C 404 414A 421C 425 Cessna: T182 TR182 340A 402C 404 414A 421C 425 Cessna: U206G TU206G 210N P210N T210N 210R T210R 310P T310P 310Q T310Q 310R T310R 441 Cessna: U206G TU206G 210N T210N 210R P210N T210R T303 441 Raytheon: F33A V35B A36 B36TC 58 58A 58P 58PA 58TC 58TCA B200 B200C B200CT B200T Raytheon: F33A V35B A36 B36TC 58 58A 58P 58PA 58TC 58TCA B200 B200C B200CT B200T Raytheon: B200 B200C, B200T, B200CT A200CT Raytheon: B200 B200C, B200T, B200CT A200CT Fairchild: SA227-AT SA227-AC SA227-BC SA227-CC SA227-DC Part No. Price
Block No.
APPLICATION CHART
Aircraft Acro Sport Avid Flyer Baby Great Lakes Cozy Dragonfly Glasair Glass Goose Kitfox KR-2 Engine 0-320 Rotax 503 Rotax 532 C-80A 0-320 0-320 0-360 1834VW 2100VW 0-320 0-320 0-360 0-540 0-320 0-320 Rotax 503 Rotax 912 1835 VW 2100 VW Subaru 0-200 0-235 0-290 0-320 0-320 0-360 HP 150 52 64 80 150 160 180 60 82 150 160 180 270 150 160 46 80 55 80 75 100 118 140 150 160 180 Hub Dia./Pitch Thickness 71/48 3.7 68/34 2.1 71/35 2.1 66/48 3.25 68/72 3.7 68/74 3.7 68/76 3.7 52/45 2.75 52/48 2.75 68/72 3.7 68/74 3.7 68/76 3.7 69/113 3.7 64/62 3.7 64/64 3.7 68/30 2.1 68/47 2.25 52/48 2.75 52/50 2.75 53/68 3.7 58/68 3.7 58/68 3.7 60-72 3.7 62/72 3.7 62/74 3.7 68/76 3.7 Price Schedule F B B F F F F D D F F F F E E B B D D D E E E E E F
RAB40012 C40010 RAB40189 C40179 RAB40046 C40055 RAB40193 C40187 RAC40256C40257 1 RAC40256C40257 2 RAC40371C40363 1 RAC40371C40363 2 RAB40332 C40331
05-01326 $49.50 05-01327 $69.85 05-01328 $119.75 05-01329 $79.95 05-01330 $52.50 05-01331 $56.50 05-01332 $63.75 05-01333 $63.75 05-01334 $78.25
Lancair
P-Tip P-Tip $12.50 .. $18.65 $13.00 .. $19.20 $15.50 .. $23.10 $16.40 .. $24.40
MULTI-BLADE PROPS
Three-Blade ........ 2 Blade rate x 3 Up to 48 diameter ............$61.00 Four-Blade .........2 Blade rate x 4 49 - 110 ......................... $83.00
Prices Subject to Change Without Notice
168
SENSENICH PROPELLERS
SENSENICH METAL PROPS
CM
Most popular models of Sensenich metal propellers are available in local stock for immediate shipment. Installation bolt kit is furnished with each propeller. Attaching kit for flange shaft will be packed for all Continental installations unless taper shaft installation is specified. Propellers may be shipped via UPS. Partial List - Request Prices on Unlisted Models. Approximate Shipping Weight 40 Lbs. Aircraft Model* Engine Standard Prop Climb Prop Cruise Prop Our Price Aeronca 11AC Cont. A-65 74CK-0-46 Beech Model 23 Lyc. O-320 (160 hp) 74DM6-0-60 74DM6-0-56 Bellanca 7EC, 7FC, 7JC Cont. C-90 76AK-2-46 76AK-2-44 76AK-2-48 Cessna 120, 140 Cont. C-85 76AK-2-44 76AK-2-42 Cessna 150 thru 150K Cont. O-200 69CK-0-52 Cessna 152 Lyc. O-235 (110 hp) 72CKS6-0-56 72CKS6-0-54 Cessna 172 thru 172C Cont. O-300C, D 74DC-0-56 Cessna 170 Lyc. O-360 (180hp) 76EM8S5-0-56 76EM8S5-0-54 76EM8S5-0-60 Cessna 172 Avcon Conv. Lyc. O-360 (180hp) 76EM8S5-0-56 Cessna 172, 172A Lyc. O-360 (180hp) 76EM8 series Cessna 177 Lyc. O-360 (180hp) 76EM8 series Piper J3C65, L4, Cub Cont. A-65 74CK-0-46 74CK-0-44 Piper PA-11, Cub, J4A Cont. A-65 74CK-0-46 74CK-0-44 Piper PA-11, PA-18, Cub Cont. C-90 76AK-2-42 76AK-2-46 Piper PA-18 Super Cub Lyc. O-235-C1 76AM6-2-44 Piper PA-18 Super Cub Lyc. O-320 (150 hp) 74DM6-0-56 74DM6-0-54 74DM6-0-58 Piper PA-20 Pacer Lyc. O-235-C1 76AM6-2-50 76AM6-2-48 76AM6-2-52 Piper PA-22-108 Colt Lyc. O-235-C1B 76AM6-2-48 76AM6-2-50 Piper PA-20, PA-22 Lyc. O-290-D (125 hp) 74DM6-0-56 74DM6-0-54 Piper PA-22 Lyc. O-320 (150 hp) 74DM6-0-60 74DM6-0-58 Please see Piper PA-28-140 Cherokee Lyc. O-320 (150 hp) 74DM6-0-60 74DM6-0-58 our website Piper PA-38 Tomahawk Lyc. O-235 (112 hp) 72CK-0-56 or call for Piper PA-28 140, 4 Cherokee Lyc. O-320 (150hp) 74DM6-0-58 74DM6-0-56 quote. Piper PA-28 150 Cherokee B Lyc. O-320 (150hp) 74DM6-0-58 74DM6-0-56 Piper PA-28 151 Warrior Lyc. O-320 (150hp) 74DM6-0-58 Piper PA-28 151 Warrior/160 Lyc. O-320 (160hp) 74DM6-0-60 Piper PA-28 160 Cherokee B Lyc. O-320 (160hp) 74DM6-0-60 Piper PA-28 180 Archer Lyc. O-320 (180hp) 76EM8S5-0-60 Piper PA-28 180 Cherokee C Lyc. O-320 (180hp) 76EM8S5-0-60 Piper 181 Archer II (78) Lyc. O-320 (180hp) 76EM8S5-0-62 Pitts Special S1S and S2 Lyc. I0-360 76EM8-0-56 to -61 Taylorcraft BC65, BCD12D Cont. A-65 74CK-0-48 74CK-0-46 Taylorcraft BC12D85, 485, 19 Cont. C-85 74CK-2-46 74CK-2-44 Stoddard Hamilton Glasair ITD, FT,RG Lyc 0-320/160hp Stoddard Hamilton Glasair IITD, FT,RG Lyc 0-320/160hp Stoddard Hamilton Glasair IIITD, FT,RG Lyc 0-320/160hp Tri-R (KIS)/116 Lyc 0-235-L2C Vans RV-3/150, RV-4/150 Lyc 0-320/150hp Vans RV-3/160, RV-4/160 Lyc 0-320/160hp Vans RV-6/RV-6A150 Lyc 0-320/150hp Vans RV-6/RV-6A160 Lyc 0-320/160hp Zenith CH-2000/116 Lyc 0-235 (116hp) 72CK-0-46 72CK-0-48 Zenith CH-2000A/150 Lyc. 0-320 (150hp) 74DM6S5-0-58 *All models listed are land planes.
WP ME HA AP LG EP CS IN EL AV TO PS BV
For the Lycoming 0-235 (125 HP): 72 CK Series Propeller...............................72 CK Series Propeller ..................... P/N 05-01468 ................$3,171.00 For the Lycoming 0-320 (150 or 160 HP): 70 CM Series Propeller...................70 CM Series Propeller .................... P/N 05-01469 ................$3,438.00 For the Lycoming 0-360 (180 HP): 72 FM Series Propeller ..............................72 FM Series Propeller .................... P/N 05-01470 ................$3,447.00 Both Systems Include: High Performance Fixed-Pitch Aluminum Propeller Aluminum Propeller Extension Included 2 yr or 200hr warranty (whichever comes first) Personalized service Specify aircraft model, engine, & pitch (standard, climb, or cruise) when ordering. Also available for Murphy Rebel, Elite, Glasair, Thorp T-18, Tri-R, Midget Mustang, & many other homebuilts. Propeller Bolt Kit Price Application Part No. 76AK AN6H-32AS $286.95 76AM6 AN6H-33AS $306.95 76EM8 AN8H-46AS $298.00
Attaching Hardware Included A full 2 dia. reduction allowed for repairs Propeller system that can be serviced anywhere.
Propeller Bolt Kit Application Part No. 69CK AN6H-37AS These propeller bolt kits for Sensenich aluminum propellers include 72CK AN6H-37AS the bolts and washers for propeller attachment. 74CK AN6H-32AS
PROPELLER BUSHINGS
This propeller is STCs for Cessna 172s I thru P using Lycoming 0-320 series engines. It is available in pitches of 56 to 60 and no spinner change is required. Features a full 2 inch diameter reduction. Model 74DM7S14-0-56-60 (Specify pitch) ......................................... $2,562.95
169
PROPELLERS
SENSENICH WOOD PROPS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Original equipment on Piper, Aeronca, Taylorcraft, Cessna, Ercoupe, Fairchild, and others. Metal tipping and high lacquer finish. Bolts and mounting plates not included. 18 lbs. each. FAA approved for certificated aircraft. Also excellent for experimental aircraft. Aircraft Spruce is an authorized Sensenich factory distributor. *Props w/asterisk are most commonly used props & are normally in stock for immediate shipment.
STANDARD PROP
Aircraft Models Aeronca 7AC, 11AC, 11ACS Cessna 120, 140 Commonwealth 185 Luscombe 8A Piper J-3, J-4A, PA-11, A-17 Piper J-3 (Duster) Piper J-4E Piper J-4F, PA-15 PA-14, PA16, PA-18, PA-20 PA-20, PA-22 125,135 PA-18, PA18A T-Craft BC65, BC1265 L2, D65, DC065 T-craft BC12D BC12D1 Stinson 10, HW75 Cont. A70 W70Dk-40 05-01811 $1,661.00 Cont. A65 W72CK-42 05-W72CK-42 $1,365.00 W72CK-40 05-00583 $1,369.00 Engine Cont. A65 Cont. C85 Cont. C85 Cont. A65/C65 Cont. A65/C65 Cont. A75 Cont. A75 Lyc. O-145B Lyc. O-235C1 Lyc. O-290D/D2 Lyc. O-290D/D2 Cont. A65 Stnd. Prop W72CK-42 W74FK-45 W74FK-44 W76CK-42 W72CK-42 W70DK-40 W70DK-42 W70LY-36 W74FM-49 W74FM-54 W74FM-49 W72CK-42* Part No. 05-W72CK-42 05-01808 05-01809 05-01810 05-W72CK-42 05-01811 05-01812 05-01813 05-01814 05-01815 05-01814 05-W72CK-42 Price $1,365.00 $1,849.00 $1,829.00 $1,962.00 $1,365.00 $1,661.00 $1,661.00 $1,726.00 $1,830.00 $1,729.00 $1,830.00 $1,365.00 W74FM-47 05-01819 $1,829.00 W74FM-47 05-01819 $1,829.00 W76CK-40 W72CK-40 05-01821 05-00583 $1,961.00 $1,369.00 Climb Prop W72CK-40 W74FK-44 Part No. 05-00583 05-01809 Price $1,369.00 $1,829.00
We carry the complete Arrowprop Propeller Co. line of props used on airboats, ice sleds, hovercraft, bowfishing, air drives, and wind machines. These props are for use with engines such as Briggs & Stratton, Rotax, Cuyuna, Tecumseh, Hirth, Yamaha, Kawasaki, Onan, wisconsin, Kohler, Honda, and others. The props are available in diameters from 26 to 48 and with 2, 3, 4, 5, 6, or 8 blades. All propellers have a 1-3/4 prop hub except for 48 prop which have 2 hubs. CALL WITH YOUR REQUIREMENTS AND REQUEST QUOTATION. Each Tennessee propeller is solidly built by skilled craftsmen from the finest selection of hardwoods. The laminated propeller is carefully assembled, carved, balanced and finished. Standard Rotax hub bolt pattern (others available on request). When ordering, please tell us: 1. Engine type and displacement 2. Left hand or right hand drive 3. Pusher or tractor configuration 4. Gear or belt drive, and reduction ratio 5. Prop diameter and pitch Direction of prop rotation is determined by viewing rotation of prop from behind the aircraft. Left hand rotation is counter-clockwise, right hand rotation is clockwise. If you're not sure about prop size, give us a call.
Description Part No. 36 Prop 1.5 Hub TP36 42 Prop 1.5 Hub TP42 44 Prop 1.5 Hub TP44 48 Prop 1.5 Hub TP48 50 Prop 1.5 Hub TP50 52 Prop 1.5 Hub TP52 54 Prop 1.5 Hub TP54 58 Prop 1.5 Hub TP58 60 Prop 2 Hub TP602 66 Prop 2 Hub TP662 70 Prop 2 Hub TP702 Price $254.95 $309.95 $296.00 $340.95 $357.95 $357.95 $357.95 $296.00 $327.50 $342.95 $449.95 Description Part No. 36 Prop 2 Hub TP362 42 Prop 1.5 Hub TP42 44 Prop 2 Hub TP442 48 Prop 2 Hub TP482 50 Prop 2 Hub TP502 52 Prop 2 Hub TP522 54 Prop 2 Hub TP542 60 Prop 1.5 Hub TP60 64 Prop 2 Hub TP642 68 Prop 2 Hub TP682 74 Prop 2 Hub TP742 Price $345.95 $309.95 $371.95 $371.95 $389.95 $389.95 $308.95 $362.95 $401.95 $401.95 $449.95
TENNESSEE PROPELLERS
Hub Thickness Diameter 1-3/4 2 2-1/4 Stock No. 05-314-05-315-05-316- 30 ------36 ------38 ------40 ------44 --$185.95 --46 --$198.95 --48 --$202.95 --50 --$211.95 $220.95 52 --$216.95 $243.95 54 --$220.95 $247.95 56 --$225.95 $233.95 58 $225.95 $229.95 $238.95 60 $229.95 $256.00 $275.00 62 $238.95 $242.95 $251.95 64 $255.95 $260.95 $277.95 Order by P/N. Use basic P/N at top of column, and complete P/N with prop diameter. When ordering please give the following: 1. Specify clockwise or 6. Specify Aircraft model or prop counter-clockwise rotation pitch. For Vinyl Leading Edge 2. Specify pusher or tractor type. Add $20.00 Additional. For 3. Give center hole size. Polyester Leading Edge Add 4. Give bolt circle diameter $45.00 Additional. 5. Give number of bolt holes and sizes. Propeller
170
PROPELLERS
Warp Drives Advanced Composite Carbon Fiber propeller has a structural strength near that of metal propellers. Because of the stiffness achieved by using carbon fibers, the prop will do very little coning (bending forward) under power. Proper fiber placement allows the prop to flex torsionally for maximum cruise efficiency. The strongly fixed position of the blades along with optimum torsional performance translates into more thrust than conventional propellers. The interior structure of this new propeller is all carbon fiber - no fiberglass, no foam, no filler - an all carbon fiber matrix combined with top quality hybrid epoxies. Carbon fiber is one of the strongest building materials available. When properly engineered, carbon fiber can achieve the strength and stiffness of a metal part, as demonstrated by its wide range of industrial and aerospace uses. All propellers and blade types are available with Stainless Steel Leading Edge protection as an option at additional cost. 1. STANDARD ADVANCED COMPOSITE CARBON FIBER BLADES The Standard Carbon Fiber Blades can be used on Rotax, Arrow, VW and similar engines. 2. HIGH HORSE POWER ADVANCED COMPOSITE CARBON FIBER BLADES The Carbon Fiber HP Blades will be required for use on Lycoming, Continental and some auto conversion engines. Warp Drive offers two types of hubs of our propellers. First is our Standard Hub. This is an assembly of anodized aluminum plates and composite clamping blocks. It accommodates standard and custom hub bolt patterns of up to 3 1/8. The second type of hub is the HP Hub. This hub consists of two halves machined from solid aluminum. It is the same weight as the standard hub assembly and can accommodate Rotax, Arrow, VW, SAE I Continental, SAE II Lycoming and custom bolt patterns.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
WITH HP HUB
05-31940 ......................................$719.00 05-31945 ......................................$924.00
ORDERING A PROPELLER
We request all applicable information below when you are ordering: 1. Name, Address, Phone Number(s) 2. Vehicle - type, make, model, cruise speed, tractor/pusher, 3. Engine - make, horse power, 4. Reduction Drive - type, ratio. If there is no reduction drive, (State Prop RPM) 5. Hub Requirements - A) Bolt circle dia, B) Number of bolts, C) Bolt dims, D) Center hole dims, E) Drive lug dimensions (if applicable), 6. Propeller Description-rotation, diameter, structural limitation of diameter manufacturers suggested prop description, no. of blades, tractor or pusher.
The In-Flight Adjustable Pitch Ivoprop allows the pilot to change the propeller pitch in flight through a toggle switch mounted in the cockpit. Pressing the toggle switch one way sends an electric current through the graphite brushes to the slip rings and finally to an electric motor. Torque from the electric motor is channeled to a planetary gear drive which turns the lead screw. Torsional rods transmit movement from the center of the prop to the outside section of the blades, causing the blade to twist therefore changing pitch. Total time for the full range of adjustment is about 5 seconds. Mounts directly to any Rotax gear box (B or C0 and can be adapted to VW, Subaru, Hirth, Arrow and smaller Lycoming and Continental engines. Older model Ivoprop ground adjustable props can be converted to the In Flight System with the Retrofit Kit. In Flight adjustable hub comes assembled with complete instructions. Weight of 3 blade 72 In Flight Adjustable Prop including all required parts (furnished) is 9 lbs. Specify aircraft and engine make and model, and propeller diameter (48 to 76). Standard Ivoprop is for engines up to 100 hp. Medium Ivoprop is for engines around 100HP (52-74 prop dia.). Magnum Ivoprops are a high-horsepower version with wider blades and a bigger hub for engines up to 700 HP (56-76 prop. dia. ). Standard 2-Blade Ivoprop Kit ............. P/N 05-33205 ........ $1,079.00 Standard 3-Blade Ivoprop Kit ............. P/N 05-33210 ........ $1,238.00 Standard Retrofit Kit for Ground Adjustable Ivoprops P/N 05-33215 ........... $761.00 Medium 2-Blade Ivoprop .................... P/N 05-00694 ........ $2,174.00 Medium 3-Blade Ivoprop .................... P/N 05-00695 ........ $2,426.00 Medium Retrofit Kit for Ground Adjustable Ivoprops P/N 05-00696 ........ $1,503.00 Magnum 2-Blade Ivoprop Kit .............. P/N 05-33270 ........ $2,451.00 Magnum 3-Blade Ivoprop Kit .............. P/N 05-33280 ........ $2,755.00 Magnum 6-Blade Ivoprop Kit .............. P/N 05-33290 ........ $3,849.00 Magnum Retrofit Kit for Ground Adjustable Ivoprops P/N 05-33295 ........ $1,590.00
Converts In-Flight Adjustable Ivoprop into the constant speed propeller Plugs into existing wiring harness Size: 2 x 4 x 1 P/N 05-00601 ................. $347.00 ACCESSORIES
Description Part No. Price Pitch Block Set 9 DG UP9 $8.50 Pitch Block Set 11 DG UP11 $8.50 Pitch Block Set 13 DG UP13 $9.50 Pitch Block Set 15 DG UP15 $8.50 Pitch Block Set 17 DG UP17 $8.50 Bolt Sleeve Set UPSLEEVE $4.00 Replace LH Blade UP105P $73.50 Hub half 2 Blade UP1072 $35.00 Hub Half 4 Blade UP1074 $35.00 Description Pitch Block Set 10 DG Pitch Block Set 12 DG Pitch Block Set 14 DG Pitch Block Set 16 DG Pitch Block Set18 DG Hardware Pack Replace Blade RH Hub Half 3 Blade Part No. UP10 UP12 UP14 UP16 UP18 UPHDW UP105T UP1073 Price $8.50 $8.50 $8.50 $8.50 $8.50 $4.00 $73.50 $35.00
ULTRA-PROP
Select 2, 3, or 4 blade props. Each blade is moulded from a high strength glass-reinforced composite. High efficiency airfoil design means high thrust from a 59" diameter prop. One set of pitch blocks included, additional blocks available in 1 increments. Universal hubs made from high strength composite. Accommodates most popular bolt-mounting patterns. Each prop comes complete with all assembly and mounting hardware, and complete instructions. Black blades and hub are beautifully complemented by high impact polyester spinner. Blades can be trimmed to length, allowing custom prop diameters as small as 48".
Description Kit 2 Blade LH Kit 3 Blade LH Kit 4 Blade LH Kit 5 Blade LH Kit 6 Blade LH Part No. UP102L UP103L UP104L 05-06456 05-06458 Price $235.00 $285.00 $339.00 $440.00 $495.00 Description Kit 2 Blade RH Kit 3 Blade RH Kit 4 Blade RH Kit 5 Blade RH Kit 6 Blade RH Part No. UP102R UP103R UP104R 05-06455 05-06457 Price $235.00 $285.00 $340.00 $440.00 $495.00
ULTRA-PROP SPINNER - Kit includes white polyester spinner, mounting bracket, and all extra hardware for installation. Specify Quicksilver MX belt drive type with 1/4 inch mounting hardware or Rotax gear drive with 5/16 or 8 mm mounting hardware. Note: Designed for use on Ultra-Prop only. 1/4 MX ......... P/N 05-04958 ..........$59.95 5/16 Rotax ... P/N 05-04959 ..........$59.95
171
SPINNERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Designed specifically for fixed pitch wood or metal props installed on horizontal opposed engines with prop hub thickness not exceeding 3-5/8. Kit includes 8 diameter x 12 long spinner dome center hole is 2.68 diameter, two aluminum bulkheads, mounting hardware, templates for trimming dome to fit prop hub and complete installation instructions. Ideal spinner for homebuilts. Wt. 1-3/4 lbs. FAA approved for installation on many certificated aircraft such as Aeronca, Cessna, Luscombe, Piper, Stinson and Swift. FAA approval list on request. Note: ACS Plates will only work with ACS Domes. Made in the U.S.A. Complete Kit.................................. P/N 10005 ......................$283.95 Bulkheads Only: Front .................. P/N 05-02677 ...................$69.75 Rear .............................................. P/N 10004-R .....................$69.75 Dome Only .................................... P/N 10003 ......................$156.95
Aluminum spinner, 12-1/16 diameter, 13-1/4 long. Center hole is 2-5/8 diameter. Designed for installation on homebuilts with Lycoming 0-290, 0-320 and 0-360 engines. Spinner dome and bulkheads fabricated from .080 thick aluminum for durability. BN-3 spinner kits available for props with hub thicknesses of 3-7/16, 3-9/16, 3-3/4, 4-1/4, 4-11/16, 5 and 5-3/8. Wt. 3 lbs. Furnished with predrilled front and rear bulkheads, mounting hardware and trimming and installation instructions. To order, see How To Order Spinner Kits. Note: ACS Plates will only work with ACS Domes. Made in the U.S.A. Complete Kit .......................................... P/N 10060 ........... $234.95 Rear Bulkhead Only (Large) .................. P/N 10031 ............. $50.25 Front Bulkhead Only (Small) ................. P/N 10051 ............. $57.75 Dome Only ............................................. P/N 10022 ........... $121.95
Aluminum spinner, 9-7/8 diameter, 11-1/8 long. Center hole is 2-1/4 diameter Spinner dome fabricated from .080 thick aluminum for durability. Wt. 2 lbs. Furnished with mounting hardware and trimming and installation instructions. Used on Q2, Q200 and other homebuilts. To order, see How To Order Spinner Kits. Made in the U.S.A. Note: ACS Plates will only work with ACS Domes. Complete Kit............................................. P/N 10303 ............$176.95 Rear Bulkhead Only ................................. P/N 10302 ..............$53.00 Dome Only ............................................... P/N 10301 ........... $113.95 SN-4 Kit (undrilled bulkhead) ................... P/N 05-13200 ......$198.50 Optional Front Bulkhead (Not Incl.In Kit ) P/N 10304 ..............$59.75 Front Plate available for hub thicknesses of 3-3/8, 3-1/2 and 2-3/4 only. Please furnish the following information so that we may provide the proper spinner kit for your combination of prop hub thickness, prop bolt and prop bushing diameters, and bolt hole pattern. Spinner Model Prop Hub Thickness (T) Prop Bolt Dia. (d1) Prop Bolt Bushing Dia.(d2) Specify SAE #1 or SAE #2, SAE #3, or Rotax Pattern *Rotax & 4 Pattern are an additional $25.00 Also Available in 6 hole, 4 Bolt circle Diameter. Forward Facing Flange Additional $60.00 Fee ACS machine fee PN 05-04904 $25.00 * Note: SAE #1 = 4-3/8 dia.; SAE #2 - 4-3/4 dia.; SAE #3 = 5-1/4 dia.
PROP SPACERS
(6061 Aluminum with Prop Bolt Holes Drilled) Thickness P/N Price Thickness P/N Price 1/16 ............. 10055-1........$15.95 1/4 ...........10055-4 .... $22.95 3/8* ............ 10055-5 ..... $29.95 1/8 ............... 10055-2........$17.95 3/16 ............... 10055-3.........$21.95 *Furnished in two pieces: Specify SAE and bolt size. All are 1/4 and 1/8 thick special order. The BN-2 aluminum spinner kit features a 10 long dome and is 10-3/4 in diameter. It is furnished complete with a rear bulkhead and hardware kit.Note: ACS Plates will only work with ACS Domes. Made in the U.S.A. BN-2 Spinner kit w/drilled plate. . P/N 10340 ......$215.95 BN-2 Dome Only......................... P/N 10341 ......$139.95 BN-2 Rear Bulkhead only.................................... P/N 10342 ........$53.25 BN-2 Spinner kit w/undrilled plate. ...................... P/N 05-13500 $215.95 Aluminum spinner 10-1/8 diameter. Length of dome varies from 13-1/2 to 15-1/2, depending on prop hub thickness. Heavy duty construction. Furnished with predrilled front and rear bulkheads and streamlined fairing for pusher installations. Kits available for hub thicknesses of 3 to 5. For Lycoming 0-235 engines specify SAE #1 (4-3/8 dia.) or SAE #2 (4-3/4 dia.) bolt circle. Wt. 2-3/4 lbs. Furnished with mounting hardware and trimming and installation instructions. To order, see How To Order Spinner Kits. ACS Plates will only work with ACS Domes.Made in the U.S.A. Complete Kit .................................................... P/N 10105 ..........$283.95 Kit Less Fairing .............................................. P/N 10105-1 ....... $232.95 Front (Large) Bulkhead Only ......................... P/N 10102 ............ $55.50 Front (Large Heavy Duty) Bulkhead Only...... P/N 10102HD ....... $83.50 Rear (Small) Bulkhead Only .......................... P/N 10103 ............ $59.75 Dome Only ..................................................... P/N 10101 .......... $128.95 Fairing Only.................................................... P/N 10104 ............ $59.50 LG Bulkhead 3/8Bolt, 5/8 Bushing SAE1 ... P/N 05-03428 ....... $41.00 LG Bulkhead 3/8 Bolt, 5/8 Bushing SAE2 ... P/N 05-03429 ....... $55.50
This new super-light spinner dome weighs about 8oz. which drastically reduces the spinner assembly weight and the need for lead ballast in the nose of pusher-type aircraft. This weight savings, combined with the revolutionary new tapered spinner dome which reduces drag can increase the cruise speed of almost any pusher-type homebuilt. These spinners have been used on a modified VariEze to win several air races. This composite dome uses the AC-1 10102HD aluminum bulkheads and the 10104 fairing. The spinners bulkhead is spun from 6061 aluminum sheet. The premium bulkhead is turned from 6061 billet for more fatigue resistance and is grey anodized. AC-1 Advanced Composite Dome ..............P/N 01-28000 ........ $289.50 AC-1 10102HD Bulkhead (Standard) ..........P/N 10102HD .......... $83.50 AC-1 Bulkhead (Premium) ..........................P/N 05-04906 ........ $269.00 AC-1 Faring .................................................P/N 10104 ............... $59.50
172
SPINNERS
ACS SKULL CAP SPINNERS
5-inch diameter - For wood or metal props on Cont. A-65 to O-200 engines. Complete with mounting bracket and installation hardware. High-polish finish. Top quality. Made in the U.S.A. Polished ..P/N 10210 .................$56.50 Unpolished .................................................P/N 10211 .................$45.00 5 Skull Spinner Dome (only) Polished ......P/N 05-21600 ............$41.75 6-inch diameter - For Lycoming O-235 to O-360 engines and Cessna 170s. With mounting bracket and installation hardware. High-polish finish. Top quality. Polished ......................................................P/N 10220 .................$62.75 Unpolished..................................................P/N 10221 .................$52.75 6 Skull Spinner Dome (only) Polished ......P/N 05-21700 ............$49.50 Bracket & Hardware Only (Fits Either Spinner) P/N 05-21800 ............$11.90
For all props with standard Rotax 75mm bolt pattern. Spinner bulk head is predrilled and installs between prop and gearbox flange. Spinner installs with single bolt. 4 Diameter P/N 05-01129 ..........................$83.75 5 Diameter P/N 05-01131 ..........................$97.50 6-3/4 Diameter P/N 05-01132 ........................$123.95 7 Diameter P/N 05-04447 ........................$142.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Skull Cap Spinner Assembly (small) for Cessna, FAA/PMA Approved. For wood or metal propellers on A-65, A-75, C-85, and C-90 Continental Engines. Made in the U.S.A. Spinner Assembly ..... P/N 05-06844 ........$68.50 Dome Only ................ P/N 05-04829 ........$46.75 Bracket Only ............. P/N 05-04830 ........$18.85
12 diameter, 11-1/8 long. Similar to a Piper design and adaptable to many homebuilts. Fabricated from .080 aluminum for durability. Furnished with predrilled rear bulkhead. Wt. 2 lbs. Mounting hardware and trimming and installation instructions furnished. To order, see How to Order Spinner Kits.Optional Front Bulkhead available for 2 1/16 Hub Thickness. ACS Plates will only work with ACS Domes. Made in the U.S.A. Complete Kit (less Bulkhead).....P/N 10313 ............. $182.95 Bulkhead Only ............................P/N 10312 ............... $63.75 Dome Only .................................P/N 10311 ............. $119.00 Front Bulkhead ...........................P/N 10314 ............... $73.00 SN-5 Kit (Undrilled Plate) ...........P/N 05-13300 ........ $185.95 SN-5 Kit (Drilled Plate) ...............P/N 05-03433 ........ $189.75
These new composite materials spinners and bulkheads are FAA/PMA approved and STCs to replace aluminum spinners and bulkheads on the Piper aircraft models listed below. Bulkheads are constructed for maximum strength and resistance to fatigue due to vibration. Pipers metal versions often crack in 200-300 hours, whereas the composite assemblies have been tested over 4000 hours on a PA-28 with no failure. Spinners for twins & all P/N 05-00744 bulkheads are warranted against vibration fatigue for the life of the aircraft by the factory. Includes hardware & O-rings. Description Model PN Spinner Kit PA28-140/150/160 05-28350 Spinner Dome 150A, 150F, 150FA 05-01257 Spinner Dome 170B, 172, (1956-59) 05-01258 Spinner Dome 172XP 05-01259 Spinner Dome 172 Skyhawk (G-Q) 05-00744 Spinner Dome 182 P, Q Skylane 05-00746 Spinner Dome 177B, 177RG Cardinal 05-00747 Spinner Dome 210 (all 3 blade McCauley 05-00748 Spinner Dome PA-140/150/160 Cherokee 05-00749 Spinner Dome PA-24-180/250, PA23-150/160 05-00752 Spinner Dome PA-24-180/250, PA23-235/250 05-00753 Bulkhead PA30, PA23-250 (Aztec) 05-02659 Spinner Dome PA30, PA23-350 (C model & up) 05-02660 Spinner Dome PA28-151/161 Warrior 05-02662 Alt. Bulkhead PA28-151/161 Warrior 05-02658 Fwd. Bulkhead PA28-151/161 Warrior 05-02655 Spinner 310R, T310Q, T310R, T310P 05-00754 Rear Bulkhead PA28-161 Warrior 05-02663 Spinner Dome PA28-161 Warrior 05-02661 Spinner LH PA34-200T Seneca II 05-02665 Spinner RH PA34-200T Seneca II 05-02666 Bulkhead PA34-200T Seneca II 05-02664 Bulkhead PA31/-325/-350 Navajo 05-02667 Bulkhead PA31/-325/-350 Navajo 05-02668 Spinner Dome PA31/-325/-350 Navajo 05-02669 Spinner Dome PA31/-325/-350 Navajo 05-02670 Bulkhead only PA38-112 Tomahawk 05-02656 Spinner Dome PA28-235 05-00756 Fwd. Bulkhead PA28-180/181 Cherokee/Archer 05-00757 Spinner Dome only PA28-180/181 Cherokee/Archer 65805-00 Spinner Dome PA32R-300, PA32-260/300/301, 05-00758 PA28R-180/200, PA-235 Fwd. Bulkhead 05-00759 Spinner Dome PA38-112 Tomahawk 05-00761 Spinner Dome PA34-200 Seneca I 05-00762 Fwd. Bulkhead PA28-161 Warrior 05-02671 Spinner Dome PA34-200 Seneca I 05-00763 Price $868.00 $398.00 $680.00 $811.00 $389.00 $794.00 $791.00 $799.00 $364.00 $736.00 $909.00 $727.00 $977.00 $427.00 $418.00 $411.95 $759.00 $369.00 $461.95 $1,486.00 $1,486.00 $1,055.00 $949.00 $950.00 $1,295.00 $1,295.00 $439.95 $837.00 $347.95 $961.00 $614.00 $373.95 $713.00 $1,279.00 $425.95 $1,545.00
The SN-2 aluminum spinner kit features an 11.5 long dome and 11-5/8 dia. Furnished complete with a rear bulkhead & hardware kit. Note: ACS Plates will only work with ACS Domes. Made in the U.S.A. SN-2 spinner kit with drilled plates. P/N 10330 ..........$206.95 SN-2 dome only ................... P/N 10331 ..........$137.95 SN-2 bulkhead only ......................................... P/N 10332 ............$53.25 SN-2 spinner kit w/undrilled plates .................. P/N 05-13400 .....$144.00 For spinner kits with drilled plates, please furnish information required for spinners orders as noted on page 179.
UHS spinners are practical, attractive, and flight proven having enhanced the apperance of many different aircraft. The spinners are available in 8, 9, 10, 11, 12 & 14 diameters for various engine and propeller combinations. For GSC, Ivoprop, Warp Drive, and Power Fin propellers using Rotax, Lycoming, Cont. & Mosler engines, spinners are sent cut out and assembled.
For pre-drilled cut-outs we require the following information: 1. Make and size of engine. 3. Number of Blades. 2. Make of Propeller. 4. Size required. Given adequate information, we can also fabricate spinners for many other propeller-engine combinations. Call with your requirements and we will assess your particular application.
Size Description 8 9 P/N Price Size Description P/N Price
UHS Spinner 05-09400 $216.95 UHS Spinner 05-09500 $226.95 Spinner Kit Spinner Kit 05-09700 $215.95 05-09800 $252.95
10 UHS Spinner 05-09200 $201.95 11.5 11 UHS Spinner 05-09300 $216.95 13.5
Required for wooden propellers. Flange equivalent to Cont. P/N 3991. For use with A-65, C-85 installations or Lyc. 0-235 with SAE1 (43/8) bolt pattern. P/N 10351Cont........ List $256.00 ............ $34.75 Flange equivalent to Lyc. P/N 45688, for use with Lyc. 0-235 thru 0-360 engines with SAE2 Bolt Pattern engines. P/N 10352 Lyc......... List $114.40 ........... $36.75
173
CM WP ME HA AP LG EP
Bolt Circle SAE 1 (4.375) SAE 2 (4.75) SAE 2 SAE 2 SAE 2 SAE 2 SAE 2 SAE
Bolt Dia. 3/8 3/8 3/8 7/16 1/2 3/8 7/16 1/2
Part No. 05-02464 05-02465 05-02466 05-02467 05-02468 05-02469 05-02470 05-02471
Precision machined prop shaft extensions are available from Aircraft Spruce & Specialty Co. Dont settle for lesser quality at advertised savings. Prop extensions are machined from solid 2024 T-351 aluminum bar, and are supplied with clear anodized finish and stainless steel drive lugs (installed). 7 diameter prop side is recommended for 0-320 engines running wood props, and is required for 0-360 engines (or larger) running wood props. For Cont. 0-200, you may choose 5.5 diam on engine side. If prop is metal, please measure depth of drilled counterbore at all 6 bolt hole positions. Flange Engine Cont. A-65, A-75, C-85, C-90, 0-200 Lycoming 0-235 Lycoming 0-290 Lycoming 0-320 Lycoming 0-360 Lycoming O-540 X E SAE No. SAE 1 SAE 1 or 2 SAE 2 SAE 2 SAE 2 SAE 2 P SAE Bolt Circle 4-3/8 Lug Eng. Bolt Diameter Dia. 5/8 3/8 5/8 5/8 5/8 3/4 3/4 3/8 3/8 3/8 or7/16 1/2 1/2
PROP EXTENSIONS
PROP SPACERS
Solid Prop Spacers, 6 thru holes. The prop bolt goes thru the prop and spacer and threads into the engine. Bolt Diameter PRO SPACER 1.5x5 ROTAX PRO SPACER 2x5 ROTAX PRO SPACER 2.25x5 ROTAX PRO SPACER 3x5 ROTAX (SPOOL) PRO SPACER 4X5 ROTARY (SPOOL) Part No. 05-02472 05-02473 05-02474 05-02475 05-04418 Price $340.95 $340.95 $340.95 $361.00 $361.00
CS IN EL AV TO PS BV
PRICES ON PROP EXTENSIONS CAN VARY PER APPLICATION PLEASE CALL AND REQUEST A QUOTE FOR YOUR APPLICATION.
The FC WINDSPOON propeller, with its revolutionary shape called WINDSPOON, offers unrivalled performance. Its technical innovations have several consequences: Better performance. Lower fuel consumption Less Noise The very special profile of the FC WINDSPOON blade has been calculated to optimize the airflow over the whole surface of the WINDSPOON. The offset of the twisting results in better reduction of friction and a longer life. The FC WINDSPOON propellers are produced in accordance with the strictest standards of the industry, with unique equipment specially made to ensure the highest quality. Propeller is available in Two-Blade and Three-Blade. For engines with high power, its structure can be reinforced (FC-R WINDSPOON). The Inconel FC WINDSPOON blade is protected with Inconel metallic reinforcement. It increases the life of the propeller and also its performance due to a change in its inertial behavior. Available Diameter: 068
The aerodynamic design of this propeller has been designed to have a "constant speed" effect. The blades that are made from unidirectional layers of carbon fiber prepeg epoxy and their structure has been defined in order to obtain the maximum stresses in torsion and bending. Therefore the effect of "constant speed" is not related to the deformation of the blade but its geometry and its particular profile. Because of the extra flat profile and low chord,excellent performance is obtained in both: Aerodynamic and acoustic performance, but also in fuel consumption. Thanks to the "constant speed" effect, there is very small engine speed difference between the aircraft on ground and in flight. This propeller allows for excellent performance throughout the flight envelope including: Improved efficiency at takeoff and climb rate due to higher engine speed Many cruise extension A high user comfort Propeller is available in Two-Blade and Three-Blade. For engines with high power, its structure can be reinforced (SWIRL-R). The Inconel SWIRL blade is protected with Inconel metallic reinforcement. It increases the life of the propeller and also its performance due to a change in its inertial behavior. The DUC spinners are carried out in preimpregnated carbon fiber materials with on the surface woven carbon fabric. The mounting plate, entirely out of carbon, thickness 0.12" (3mm), is produced with the Carbon Forge process, also used for the manufacture of the DUC propeller hubs. This patented process makes it possible to increase considerably the mechanical characterestics of the composite parts.
DUC SPINNERS
SEE WWW.AIRCRAFTSPRUCE.COM FOR COMPLETE DISCRIPTIONS & PRICING ON ALL DUC PROPELLERS, SPINNERS, AND ACCESSORIES.
174
SMOKE SYSTEMS
All of the SA-100 series smoke system oil tanks are the same size (demensions). Models Differ by oil suction tube design, oil pump mounting location and oil tank configuration. Note: All kits are available with 12 or 24 volt DC smoke oil pumps. Please specify 12 or 24 volt DC when ordering.
CM WP ME HA AP LG
For Level and Non-Continuous inverted, positive G flight. Top mounted oil pump. All hardware for complete installation. Step by step instructions. Height (To top of fill cap is) is 15 Width (End where oil pump is mounted) is 11 Depth (Pump to opposite end of tank) is 8.5 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-01438 ............................................... $830.00
SA-101 For continious inverted flight. Top mounted oil pump. All hardware for complete installation. Step by step instructions. Height (To top of fill cap is) is 15 Width (End where oil pump is mounted) is 11 Depth (Pump to opposite end of tank) is 8.5 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-01439 ............................................... $830.00 NOTE: Add 1.5 to base on each side or end for bracket width.
SA-100HFor Level and Non-Continuous inverted, positive G flight. Side / End mounted oil pump. All hardware for complete installation. Step by step instructions. Height (To top of fill cap is) is 11 Width (End where oil pump is mounted) is 12 Depth (Pump to opposite end of tank) is 15 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-02888 .............................................. $830.00
EP CS IN EL AV TO PS BV
SA-101HFor continious inverted flight. Side / End mounted oil pump. All hardware for complete installation. Height (To top of fill cap is) is 11 Width (End where oil pump is mounted) is 12 Depth (Pump to opposite end of tank) is 15 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-02889 .............................................. $830.00 NOTE: Add 1.5 to base on each side or end for bracket width.
SA-102For Level and Non-Continuous inverted, positive G flight. Bracket mounted oil pump end or side. All hardware for complete installation. Step by step instructions. Height (To top of fill cap is) is 13 Width (End where oil pump is mounted) is 11 Depth (Pump to opposite end of tank) is 13 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-01440 ............................................. $830.00
SA-103For continious inverted flight. Bracket mounted oil pump end or side. All hardware for complete installation. Step by step instructions. Height (To top of fill cap is) is 13 Width (End where oil pump is mounted) is 11 Depth (Pump to opposite end of tank) is 13 Oil tank capacity: 3.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 5+ minutes P/N 05-01441 ............................................. $830.00 NOTE: Add 1.5 to base on each side or end for bracket width.
175
SMOKE SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Both of the SA-200 series smoke system oil tanks are the same size (dimensions). Models Differ by oil suction tube design.
For Level and Non-Continuous inverted, positive G flight. For continuous inverted flight. Any Dimension top. Any Dimension top. Pump can be mounted on top or any side surface. Pump can be mounted on top or any side surface. Fill cap and any other fittings installed where you want them. Fill cap and any other fittings installed where you want them. All hardware included for complete installation. All hardware included for complete installation. Height (To top of fill cap is) is 14 Height (To top of fill cap is) is 14 Width (End where oil pump is mounted) is 10 Width (End where oil pump is mounted) is 10 Depth (Pump to opposite end of tank) is 17.25 Depth (Pump to opposite end of tank) is 17.25 Oil tank capacity: 5.5 US Gallons Oil tank capacity: 5.5 US Gallons Approx. oil used per minute: .8 Us Gallons Approx. oil used per minute: .8 Us Gallons Approx. total run time: 7+ minutes Approx. total run time: 7+ minutes P/N 05-02887 ....................................................... $930.00 P/N 05-02891 .............................................. $930.00 NOTE: Add 1.5 to base on each side or end for bracket width. This 5.5 Gallon smoke system kit is for continuous inverted flight with oil pump mounted on the top of the oil tank. This particular kit has been installed in the baggage area of a CJ6A, T34A and RV7 to date. Use this kit when height is not an issue. Dimensions: Height (to top of oil pump) 16-1/4, Width (left to right) 13, Depth (end with label) 10 P/N 05-03398........................................................................$930.00 SA-200T Non-Continuous Inverted flight ....................... P/N 05-04479........................................................................$930.00 Note: Add 1.5 at base of tank on sides and ends for bracket width.
The kit includes: 1 Injector 2 Injector Mounting Clamps 1 AN-4 90 degree fitting 1 AN-4 Straight Fitting 1 Piece of Safety Wire 1 Installation Instructions Customer must provide: Engine Make , Engine Model and/or Exhaust Diameter at Injector Location (injector should be installed just after the Y in the header pipes on typical Lycoming O-360 / O-540 or similar and 15 or more before the end of the tail pipe on radial engines). NOTE: This injector is intended for PISTON ENGINES. P/N 05-06884 ...................$68.00
The kit includes: 1 Smoke Oil Pump 1 Molex Quick Disconnect Wire Harness 1 Instructions 1 90 Degree AN-6 Fitting 2 Straight AN-6 Fittings 2 14 Gauge Wire Butt Connectors Screws, Nuts Washers Mounting Hardware Customer Must Specify 12 Volt DC or 24 Volt DC. P/N 05-04477 .................$249.00
No more spills! Fill your smoke oil tank quickly and cleanly with this 8 gallon per minute smoke oil transfer pump kit. Made with high quality components including Goodyear rubber hose, heavy duty pump, dispensing nozzle with built in swivel and aluminum hose connection fittings with filter screen and clamps! All you will need to complete the kit is any automotive (or aircraft) type 12 Volt DC battery, and your container of smoke oil! The step by step instruction manual makes set up and use safe and easy. This kit will work with any smoke oil supply container. Included: Dispensing nozzle with built in swivel and barb fitting, Oil pump with built in on/off switch and 6 foot cable with clamps for connection to battery, 18 foot x id delivery hose and 13 foot x id suction hose, Suction screen barb fitting and oil pump barb fittings with clamps. P/N 05-04971 .......................... $214.00
Your headset will fit great with these low profile, unstructed, deluxe, normal dyed cotton and stone washed hats! Features: Embroidered company name and logo Contrasting grey under bill & sweatband Self-fabric sweatband & strap with brass buckle .... Khaki P/N 05-04480 ................................................$12.99 Forest Green .................................................P/N 05-06951 ............................ $12.99 Brown ............................................................P/N 05-06952 ............................ $12.99
Smoking Airplanes Premium Blend Smoke Oil is recommended for use with all Smoking Airplanes brand smoke system kits. Features: Brilliant white smoke Persistent hang time Equal or better than leading smoke oil brands. 5 Gallon .........................................................P/N 05-06949 ............................ $84.75 55 Gallon .......................................................P/N 05-06950 .......................... $684.75 TYPICAL PROPERTIES API Gravity 38.3 Viscosity, cSt @ 40 C. 4.3 Viscosity, SUS @ 100 C 40.2 Viscosity Index 95 Flash Point,. (F.) 240 (min) Distillation, Vol% IBP 500F (min) EP 625F (max) Pounds Per Gallon 6.94 Color Clear
Super*Dri Aviation Smoke Oil is specially formulated for use in all aircraft. Whether it is a Full Scale or Model airplane Super*Dri is the cleanest burning oil you can purchase. Its pure paraffinic base creates big billowing, persistent smoke. Super*Dri is less messy. There is virtually no mess to clean off your plane, unlike the others. Super*Dri is environmentally safe and biodegradable. Super-Dri Aviation Smoke Oil - 1 Gallon .........P/N 05-04972 ........... $29.85 Super-Dri Aviation Smoke Oil - 5 Gallon .........P/N 05-04975 ......... $178.50 Super-Dri Aviation Smoke Oil - 55 Gallon .......P/N 05-04976 ...... $1,198.00
176
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Most popular metal-to-metal seat belt. This 56 adjustable seat belt offers a heavy-duty combination of an all-nylon 2 wide herringbone webbing and a metal-to-metal quick release buckle. Buckle mates with harness adapters (Shoulder Harness Items 3B or 3C) for safety belt/ harness set or use belt alone. The end fittings for each side of the lap belt have a .325 in. dia. hole which allows for a fastener/bolt to slide through, depending on the design of the aircraft/aircraft seat is where it attaches.
P/N 13-00201 13-00202 13-00203 13-00204 Color Black Brown Tan Navy Blue Price $47.50 $47.50 $47.50 $47.50 P/N 13-00205 13-00206 13-00207 13-00210 Color Royal Blue Gray Red Green Price $47.50 $47.50 $47.50 $47.50
Two Person Seat Belt - Although FAA requires that each person be provided an individual seat belt, some early aircraft were licensed using an extra-long belt in the rear seat to accommodate two people. If it is not possible to modify the aircraft to accept two belts, a two person belt is permissible. Same metal-to-metal belt as illustrated in Figure 1 but rated at 3000 lbs. test. Length 60. Advise if different length is required. Twoperson belts with slide bars not acceptable by FAA. The 3 wide belt and 2 wide harness are of heavy-duty nylon webbing. P/N 13-00501 13-00502 13-00503 13-00504 13-00505 13-00506 13-00507 13-00510 Color Black Brown Tan Navy Blue Royal Blue Gray Red Green Price $56.75 $58.50 $58.50 $58.50 $58.50 $58.50 $58.50 $58.50
STYLE NO. 4 MILITARY STYLE SEAT BELT AND SHOULDER HARNESS COMBINATION
Harness has forged steel belt buckles permitting one-stroke release from both belt and harness. Stocked in Black. Complete Set(Black) .............P/N 13-01000 ............$240.95 Certified Belt Only ................P/N 13-01100 ............$169.95 Harness Only(Black) .............P/N 13-01200 ..............$73.50
OTHER COLORS
Olive Green Price Set Kit 13-04105 $240.95 Belt 13-04106 $167.95 Harness 13-04107 $73.50 Silver Grey Price Set Kit 13-04108 $229.95 Belt 13-04109 $167.95 Harness 13-04110 $63.00 Red Price Set Kit 13-04121 $240.95 Belt Harness 13-04123
If belts are needed to replace worn ones in an aircraft in which the attachment fittings have been installed and approved, it is customary to install belts with a slide adjustment bar which permits weaving webbing through existing fitting and through bar for secure installation. Drawing shows correct method of lacing the webbing through bar. Belt is 56 long x 2 wide.The end fittings for each side of the lap belt have a .325 in. dia. hole which allows for a fastener/bolt to slide through, depending on the design of the aircraft/aircraft seat is where it attaches.
P/N 13-00401 13-00402 13-00403 13-00404 Color Black Brown Tan Navy Blue Price $59.75 $59.75 $59.75 $59.75 P/N 13-00405 13-00406 13-00407 13-00410 Color Royal Blue Gray Red Green Price $59.75 $59.75 $59.75 $59.75
Royal Blue 13-04124 13-04125 13-04126 Brown 13-04127 13-04128 13-04129 Tan 13-04133
Price
Neutral
Price
$236.95 13-04118 $251.95 $167.95 13-04119 $181.95 $69.85 13-04120 $70.00 Price Navy Blue Price $240.95 13-04130 $240.95 $167.95 13-04131 $167.95 $73.75 13-04132 $79.95 Price $240.95
Same as style No. 2A above except with #442868 clip type end fittings. Standard equipment in White Lightning aircraft. Black only. P/N 13-19601 ........................... $59.75
This is a beautiful decal set for all the Piper Seat Belt Buckles. The seat belt buckles on Pipers are always being dinged and pitted and nothing looks worse than to have a beautiful interior with ugly belt buckles. With our new decals, the ugly belt buckles become an attraction instead of an eyesore.
Four Place Piper Set ....................... P/N 05-02448................ $24.00 Set Six Place Piper Set ......................... P/N 05-02449................ $33.50 Set NOTE: SEE NEXT PAGE FOR SHOULDER HARNESSES COMPATIBLE WITH THESE SEAT BELTS.
177
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Cam Lock Style with pads.
Harness with stitched-in webbing loops for use with any 2 wide seat belt. Belt simply slides through loops and secures. Harness is Y type with one attachment fitting furnished. Black Only ................ P/N 13-00601 .......... $54.50 Harness with two chrome-plated steel adapters on front webbing extensions which mate with metal-to-metal buckle for safety belt/harness set. Harness has two separate straps with two attachment fittings furnished. Lift buckle to release belt and harness. Order belt separately. P/N 13-00801 13-00802 13-00803 13-00804 Harness with two chrome-plated steel adapters on front webbing extensions which mate with metal-to-metal buckle for safety belt/harness set. Harness is Y type with one attachment fitting furnished. Lift buckle to release belt and harness. Order belt separately. P/N Color 13-00701 Black 13-00702 Brown 13-00703 Tan 13-00704 Navy Blue Price $82.50 $87.50 $82.50 $82.50 P/N Color 13-00705 Royal Blue 13-00706 Gray 13-00707 Red 13-00710 Green Price $82.50 $82.50 $85.75 $82.50 Color Black Brown Tan Navy Blue Price $81.65 $81.65 $81.65 $81.65 P/N 13-00805 13-00806 13-00807 13-00810 Color Royal Blue Gray Red Green Price $81.65 $81.65 $81.65 $81.65
CS-647 Fittings - Left & Right (As used on 3B & 3C harnesses) P/N 13-03957 ............. $32.75 /set
PLEASE VISIT OUR WEBSITE FOR A DETAILED DRAWING OF THESE SHOULDER HARNESSES.
NOTE: These shoulder harnesses mate with #1 and #2 seat belts on the previous page but the harnesses are not FAA approved for certificated aircraft. Only the seat bellts carry FAA approval.
Crow restraint systems feature 5 attach points and are available in Latch & Link or Cam Lock versions. For RV series aircraft, the Cam Lock version is most popular. These restraint systems are available with or without 2 inch sewn-on shoulder pads, which are the same color as the rest of the belts and harness. Available in black, grey, blue, or red. Specify aircraft model (RV-7, 7A, etc.) and tandem or side-by-side seating when ordering. Not FAA approved. For experimental aircraft only.
Our Part #
Crow Cam Lock Restraint RV-6A with Shoulder Pads RV-6A RV-7A Seat Harness Price Part # Color RV-9A Belt 40002P 40003P 40004P 40007P 5-Way Restraint Bolt-in 50 Seat Belt Blue Pull Up Adj. With Bolt-in Y-Type Harness Black & Anti Subma- Bolt-in rine belt Gray Bolt-in Red Bolt-in Bolt-in Bolt-in Bolt-in $159.00 $159.00 $159.00 $159.00 Price $159.00 $159.00 $159.00 $159.00
Crow Cam Lock Restraint RV-8A with Shoulder Pads Seat Our Part Harness Part # Color RV-8A Belt # 5-Way Restraint 50 Bolt-in Bolt-in 05-06422 40012P Red Seat Belt Pull Up Adj. Individual Har05-06423 40013P Blue ness & Anti-Sub- Bolt-in Bolt-in marine Belt Front 05-06424 40014P Black Seat Harness Wrap Bolt-in W/A Around Back Seat 05-06425 40017P Gray Bolt-in Bolt-in Harness Bolt-in
Crow Cam Lock Restraint RV-10A with Shoulder Pads Seat Our Part Harness Price Part # Color RV-10A Belt # 05-06430 40022P Red 5-Way Restraint Bolt-in Bolt-in $159.00 05-06431 40023P Blue 50 Seat Belt Pull Bolt-in Bolt-in $159.00 05-06432 40024P Black Up Adj. Individual Bolt-in Bolt-in $159.00 Harness & AntiSubmarine Belt Front Seat Harness 05-06433 40027P Gray Mount on Canopy Bolt-in Bolt-in $159.00 with bent 45 degree bolt in ends.
The Christen 820 Seat Belt/Harness System was designed specifically for use in unlimited-class competition aerobatic flying. The System holds the pilot firmly in the aircraft seat during high negative-g maneuvers and supports the body laterally against side forces during tumbling, slipping or knife-edge flight. Although of extremely light-weight design, all components are of the highest aviation quality, and the system is manufactured in full compliance with the requirements of FAA TSO C22f. The basic Christen 820 System consists of a black shoulder harness, lap belt and crotch strap. Also available are a lap pad, a secondary seat belt for backup safety, and accessory hardware to facilitate installation in a variety of aircraft. The lap belt, crotch strap, and shoulder harness are locked in a single buckle with flush latch which provides positive retention. All belts are released quickly and simultaneously by simply lifting the edge of the buckle latch. Standard end fittings attach to airframe brackets using 5/16 inch bolts (not included). All metal components bright chrome plated. All webbing 2 inches wide, black color. Includes detailed product manual. Meets FAA TSO C22f, 180 lb. Tensile. Maximum extended lengths of belt assemblies from end fitting to connector are: shoulder harness 50 inches, buckle lap belt 30 inches, connector lap belt 32 inches, crotch strap 26 inches. Weight 2.9 lb. Seat Belt/Harness System........................ P/N 05-01133 .....$918.00 Lap Pad (Black) ........................................ P/N 05-01134 .....$199.95 Crotch Strap Connector for 7/8 Tubing ... P/N 05-01135 .......$73.75 Crotch Strap Connector for 1 Tubing ...... P/N 05-01136 .......$75.25 Seat Belt Brochure ................................... P/N 05-01137 .........$0.95
178
CM WP ME HA
H Loop Style Y Fit Style Aero-Tuff lap belts and shoulder harnesses are made from certified two inch wide webbing, all steel hardware pieces are chrome or cadmium plated. The end fitting have 5/16" bolt holes. Aero-Tuff restraint systems comply with ASTM Light Sport Aircraft standards. The units are for use in Light Sport, experimental and ultralight aircraft. These restraint systems shall not be used in certified aircraft. Description H Loop Black H Loop Grey H Fit Black H Fit Grey Y Fit Black Y Fit Grey Part No. 05-04694 05-04695 05-04696 05-04697 05-04698 05-04699 Price $89.95 $88.00 $99.85 $98.50 $95.75 $92.00
The Hooker Aerobatic Harness kit is very popular with sport and competitive aerobatic pilots. The set includes two 1-3/4 military style seat belt, one 1-3/4 military style shoulder harness, one 1-3/4 crotch strap, one pad set and yoke assembly for front seat. With one pad set.................................P/N 13-00935 .........$332.95 With stainless ratchet tightener ..........P/N 13-00950 .........$419.95
AP LG EP
CS IN EL AV TO PS BV
The Aero-Tuff restraint system for the RV 3, 4,6,7, 8, 9, 10 and 12 features adjustable web straps and a rotary buckle for one twist release. Each unit is custom fit for the specific model of RV aircraft. Each strap is adjustable with an end fitting. The strap permanently attached to the rotary buckle is on the crotch belt. The restraint units comply with ASTM light sport aircraft standards. The five-point restraint system is rated at 1800 lbs. The units are not for use in type certified aircraft. Description Part No. Price RV 4 8 Seat Belt Front Crotch Black 13-07029 $249.95 RV 3 Seat Belt Crotch Black 13-07030 $250.95 RV 3 Seat Belt Crotch Gray 13-07031 $250.95 RV 4 Rear Seat Belt Crotch Black 13-07032 $250.95 RV 4 Rear Seat Belt Crotch Gray 13-07033 $250.95 RV 8 Rear Seat Belt Crotch Black 13-07034 $252.00 RV 8 Rear Seat Belt Crotch Gray 13-07035 $250.95 RV-4 Front Seat Belt Crotch Black 13-07087 $249.95 RV-4 Front Seat Belt Crotch Gray 13-07088 $249.95 RV-8 Front Seat Belt Crotch Black 13-07089 $257.95 RV-8 Front Seat Belt Crotch Gray 13-07090 $249.95 RV-6 Seat Belt Crotch Gray 13-07091 $269.95 RV-6 Seat Belt Crotch Black 13-07092 $269.95 RV-7 Seat Belt Crotch Black 13-07093 $266.95 RV-7 Seat Belt Crotch Gray 13-07094 $272.95 RV-9 12 Seat Belt Crotch Gray 13-07095 $299.00 RV-9 12 Seat Belt Crotch Black 13-07096 $269.95 RV-10 Rear Seat Belt Crotch Black 13-07097 $269.95 RV-10 Rear Seat Belt Crotch Gray 13-07098 $269.95 RV-10 Front Seat Belt Crotch Gray 13-07099 $269.95 RV-10 Front Seat Belt Crotch Black 13-07101 $269.95
This set of two beautiful seat belt placards installs on the buckle to add beauty and class to your seat belts. Each placard is silk-screened on chrome metallic Mylar and coated in a hard scratch-resistant clear epoxy that looks like crystal glass. They install quickly and easily with a special pressuresensitive bonding adhesive.
Piper Seatbelt Buckle Placard (Qty. 2) ... P/N 05-03638................. $8.95 Piper Seatbelt Buckle Placard (Qty. 4) ... P/N 05-03639............... $19.85 Piper Seatbelt Buckle Placard (Qty. 6) ... P/N 05-03640............... $27.75
179
CM WP ME HA AP
FAA Approved shoulder restraint systems in your aircraft provide the best possible safety for your crew and passengers. We developed these affordable systems for production aircraft in cooperation with the FAA, therefore each H-600 series comes with an FAA STC/PMA. Our high quality belts come in a full array of colors. The kits include one standard belt with a 3-bar slide (retain your present fitting), one Y style shoulder harness (with attaching hardware) and installation instructions. Our line of seat belts and harnesses is constructed with the highest quality materials and with careful attention to workmanship. Each installation kit shown includes one belt, one harness, attaching hardware and installation instructions. The standard seat belt with 3-bar slide and the Y-style shoulder harness included is shown and described further on page 179.
Spar AN4-6ABolt
MS20365 Nut P/N/ RB-7 Plate P/N RB-8 Bushing AN960-416 Washer
Triangular Fittng
Choose from the following kits for your FAA/STC/PMA approved installation For Cessnas! Color CESSNA 120/140 13-00901-1 13-00901-3 13-00901-5 13-00901-2 13-00901-4 13-00901-6 13-00901-8 13-00901-7 CESSNA CESSNA CESSNA 172, A-I,K,L150A-H, J-M 170A & B N, P A152/152 F172N, P 13-00902-1 13-00903-1 13-00904-1 13-00902-3 13-00903-3 13-00904-3 13-00902-5 13-00903-5 13-00904-5 13-00902-2 13-00903-2 13-00904-2 13-00902-4 13-00903-4 13-00904-4 13-00902-6 13-00903-6 13-00904-6 13-00902-8 13-00903-8 13-00904-8 13-00902-7 13-00903-7 13-00904-7 CESSNA 175A,B,C 13-00905-1 13-00905-3 13-00905-5 13-00905-2 13-00905-4 13-00905-6 13-00905-8 13-00905-7 CESSNA 180 A-H, J, K 13-00906-1 13-00906-3 13-00906-5 13-00906-2 13-00906-4 13-00906-6 13-00906-8 13-00906-7 182, A-H J-N, P-R T,TR182 13-00907-1 13-00907-3 13-00907-5 13-00907-2 13-00907-4 13-00907-6 13-00907-8 13-00907-7 CESSNA 185A-E A185E 13-00908-1 13-00908-3 13-00908-5 13-00908-2 13-00908-4 13-00908-6 13-00908-8 13-00908-7 CESSNA 206, U206A-F TU206A-F 13-00909-1 13-00909-3 13-00909-5 13-00909-2 13-00909-4 13-00909-6 13-00909-8 13-00909-7 CESSNA 207, 207A T207, T207A 13-00910-1 13-00910-3 13-00910-5 13-00910-2 13-00910-4 13-00910-6 13-00910-8 13-00910-7
LG EP CS IN EL AV TO PS BV
Black Brown Red Navy Royal Blue Tan Silver Gray Olive Green
KITS
Rear $189.95 ea. 13-00914-1 13-00914-2 13-00914-3 13-00914-4 13-00914-5 13-00914-6 13-00914-7 13-00914-8 Rear $233.95 ea. 13-00922-1 13-00922-2 13-00922-3 13-00922-4 13-00922-5 13-00922-6 13-00922-7 13-00922-8
FAA Approved!
35 Series A-G, R
Black Navy Brown Royal Blue Red Tan Olive Green Silver Gray Black Navy Brown Royal Blue Red Tan Olive Green Silver Gray
PA-22 S-150, 160, PA-22/22-108, 135, 150, 160, Front Seat Harness Kits ea.$169.95
Black Brown Red Navy Royal Blue Tan Silver Gray Olive Green 13-00916-1 13-00916-3 13-00916-5 13-00916-2 13-00916-4 13-00916-6 13-00916-8 13-00916-7
PA-28 Front Seat Harness Kits pr. $499.95 Includes seat belts, harnesses and hardware for front seats.
Black Navy Brown Royal Blue Red Tan Olive Green Silver Gray 13-00917-1 13-00917-2 13-00917-3 13-00917-4 13-00917-5 13-00917-6 13-00917-7 13-00917-8 For ceiling vent system, modication may be needed to the existing system for our seat belt/shoulder harness installation. Drawings & instructions are unavailable for this modication.
$169.95 each
13-00920-1 13-00920-2 13-00920-3 13-00920-4 13-00920-5 13-00920-6 13-00920-7 13-00920-8
FAA Approved!
180
Spar
FAA Approved!
FAA Approved!
FAA Approved!
SEAT BELTS
AEROBATIC/MILITARY
FULL RESTRAINT
The ultimate for aerobatic competition consists of 3 TSOd lap belt with lap restraint pads, 2 shoulder harness with shoulder harness restraint pads, plus a fully adjustable crotch strap. Unique features allow for quick comfort adjustment. Positive lock buckle with quick release. Safety and comfort primary in design. Retain your own aircraft fittings. Black. 1500 lb. rating. Experimental Only. Complete System P/N 05-06238 ....................................... $249.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FAA Approved!
Set includes one Cat. No. H-701 series seat belt with 3 bar slide and one Cat. No. H-702 series Y type shoulder harness with metal to metal hardware. Hardware not included. Retain your own aircraft fittings. ............................................................................$113.95 each set Color Part No. Black 05-06236-2 Navy 05-06236-8 Brown 05-06236-7 Royal Blue 05-06236-6 Red 05-06236-5 Tan 05-06236-9 Olive Green 05-06236-3 Silver Gray 05-06236-4
Metal fitting for attachment to seat belt buckle. Easily adjustable, harness combines with the 3 aerobatic seat belt for a matched set. Retain your own aircraft fittings. Experimental Only. Divided Harnesses Part No. Y-Style Harnesses Part No. Black 13-01200 Black 05-06232-2 Olive Green 13-04107 Olive Green 05-06232-3 Neutral 05-06234-1 Neutral 05-06232-1 Silver Gray 13-04110 Silver Gray 05-06232-4 Red 13-04123 Red 05-06232-5 Royal Blue 05-06234-6 Royal Blue 05-06232-6 Brown 13-04129 Brown 05-06232-7 Navy 13-04132 Navy 05-06232-8 Tan 13-04135 Tan 05-06232-9
END FITTINGS
Experimental Only.
P/N P/N 05-06237 05-06239 Description 3-Bar Slide Quick Disconnect Fitting Triangular End Fitting 2 Chrome Seat Belt Tip Ends
The placard is silk-screened on chrome metallic Mylar and coated in a hard, scratch-resistant clear epoxy that looks like crystal glass. Easy to install with a special pressure-sensitive bonding adhesive. Once installed, they will not come off. P/N 05-06242 ................................ $11.00 pr.
2 Webbing Color Part No. Black 05-06224-2 Navy 05-06224-8 Brown 05-06224-7 Royal Blue 05-06224-6 Red 05-06224-5 Tan 05-06224-9 Olive Green 05-06224-3 Silver Gray 05-06224-4 Neutral ---
3 Webbing Price/yd Part No. Price/yd $7.75 05-06223-2 $9.70 $8.50 05-06223-8 $9.70 $5.75 05-06223-7 $9.70 $8.50 05-06223-6 $9.70 $5.75 05-06223-5 $9.70 $8.45 05-06223-9 $9.70 $5.75 05-06223-3 $9.70 $7.95 05-06223-4 $9.70 --05-06223-1 $9.70
181
Cessna Shoulder Harness Kits * New Belt Assemblies -Shoulder & Lap Belts for Pilot & Co-Pilot * All Required Hardware Cessna 100 Model List * Instruction Manual Original Type * Supplemental Type Certificate Aircraft Models Certificate # STC, C100-114IR, Front Inertial Reel, Kit .... P/N 05-03131 .... $869.00 A-799 170 170A 170B Cessna STC, C100-114FS, Front Fix Strap, Kit ........................................ P/N 05-04193 .... $669.00
3A12
G33
* Replace Your Existing Shoulder Harnesses * Complete New Belt Assemblies - Shoulder and Lap Belts Cessna 100/200 OEM Replacement Front, Fixed Strap ........................................ P/N 05-03132 .... $249.00 Cessna 100/200 OEM Replacement Inertial Reel, Upgrade ............ P/N 05-03133 .... $349.00 Cessna OEM Replacement (all models) Rear Lap Belts ............................................. P/N 05-06887 ...... $79.95
172 172A 172B 172C 172D 172E 172F 172G 172H* 172I 172K *172F (USAFT41A) *172H (USAFT41A) 3A17 5A6 175 175A 175B 175C P172D
180 180S 180B 180C 180D 180E 180F 180G 180H 182 182A 182B 182C 182D 182E 182F 182G 182H 185J 182K 182L 182M 182N 182P 185 185A 185B 185C 185D 185E A185EA185F
3A13
177B Replacement Belt Assemblies OEM Replacement, 3-Point Restraint Systems * Replace Your Existing Shoulder Harnesses * Complete New Belt Assemblies - Shoulder and Lap Belts Cessna 177/177A Minor Change Kit ........... P/N 05-03135 ...... $20.00
3A24
PA 23 STC APPROVED MODELS PA-23 PA-23-160 PA23-235 PA-23-250 PA-E23-250 PA28/32 STC APPROVED MODELS PA28-140 PA28-150 PA28-160 PA28-180 PA28-235 PA28R-180 PA28R-200 PA28S-160 PA28S-180 PA32-260 PA-32-300 PA32S-300
3 Point Diagonal Systems * M20, A, B, C, D, E, F, G 3 Point Diagonal Harness Installation * M20J Replacement Seat Belts * Complete New Belt Assemblies - Shoulder and Lap Belts 3-Point System Minor Change Kit M20 A-G (Includes the Required Hardware for Two Pilot Positions) ................ P/N 05-03139 ...... $35.00 Mooney M20 Inertial Reel Upgrade Front Inertial Reel 1...................................... P/N 05-06891 .... $349.00 Mooney M20 Replacement Front Fixed Strap ......................................... P/N 05-06890 .... $249.00 Mooney Replacement Rear Lap Belt ........... P/N 05-06888 ...... $79.95
Color swatches for your desired color group are available to be shipped to you via priority mail. When you have chosen your color, you can place your order by phone (1-877-4-SPRUCE) or order online. Then return the color swatches to Aircraft Spruce and we will credit you the $25.00 charge when you place your order for seatbelts/harnesses. For domestic orders only. International customers, please call for pricing. Custom color belts/ harnesses are special order and are nonreturnable. Lead time is three weeks for a custom color order. P/N 05-03146............ $25.00
COLOR SWATCHES
182
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aeronca Chief 11AC, BC, CC 05-02177 $185.95 05-02229 $224.95 05-02228 Bellanca Viking 05-02188 $293.95 05-02231 $351.95 05-02330 Beech Bonanza Lft. 187 thru 250C $105.95 05-02227 $126.95 05-02226 G-35 Beech Bonanza Rt. 187 thru 251C $105.95 05-02233 $138.95 05-02232 G-35 Beech Bonanza Lft. 280C $195.95 05-02235 $234.95 05-02234 250 H-35-V-35, Baron 55 Beech Bonanza Rt. 281C $195.95 05-02237 $234.95 05-02236 250 H-35-V-35, Baron 55 Cessna 120-140 S/N 8001 301C $202.95 05-02239 $243.95 05-02238 to 8799 Cessna 120-140 S/N 8800 + up 300C $202.95 300SG $243.95 05-02240 Cessna 140A, 150, 152 303C $197.95 303SG $238.95 303G Cessna 170 1948-49 to S/N 310C $200.95 05-02242 $240.95 -18728 Cessna 170A S/N 18729 to 306C $210.95 05-02243 $252.95 05-02244 20676 Cessna 172 S/N 47747 to 05-02178 $269.95 05-02245 $323.95 05-02246 49544 Cessna 170B S/N 20267+up 312C $218.95 05-02247 $259.95 312G 1952 to 1955 Cessna 172 S/N 28000 to 312C $218.95 05-02247 $259.95 312G 47746 Cessna 172 S/N49545 to 313C $279.95 05-02250 $334.95 05-02249 50572 Cessna 172 S/N 50573 to 345C $279.95 345SG $334.95 345G 72884 Cessna 172 S/N 72885 & up 337C $259.95 05-02251 $313.95 337G
Cessna R172K 05-02179 $377.95 05-02252 $452.95 05-02179 S/N R2000 to R3199 Cessna 177, 177RG 329C $314.95 05-02253 $377.95 05-02254 Cessna 180 S/N 30000 to 309C $257.95 05-02255 $308.95 05-02256 31260 Cessna 180 S/N 31261 to 315C $303.95 05-02257 $364.95 05-02258 50355 Cessna 180 S/N 50356 to 316C $303.95 316SG $364.95 05-02259 51183 Cessna 182 S/N 315C $303.95 05-02257 $364.95 05-02258 33000-51556 Cessna 182 S/N 316C $303.95 316SG $364.95 05-02259 52556-53598 Cessna 182 S/N 53599 to 338C $332.95 05-02262 $399.95 05-02261 55844 Cessna 182 S/N 55845 to 339C $356.95 339SG $427.95 339G 64296 Cessna 205 325C $300.95 05-02263 $361.95 05-02264 Cessna 206 Piper PA-38-112 TomaS/N U206-0001 thru 325C $300.95 05-02263 $361.95 05-02264 $361.95 hawk U206-0437 S/N 78A0001 to 82A0122 Cessna P206 S/N 0001 thru 325C $300.95 05-02263 $361.95 05-02264 $361.95 Rockwell 112, 114 0160 Stinson 108 Lft. Cessna U206 S/N 0438+up 326C $357.95 05-02265 $427.95 326G $427.95 Stinson 108 Rt. T/Craft BC-12d,1946+up Cessna P206 S/N 0161+up 326C $357.95 05-02265 $427.95 326G $427.95 T/Craft BC-1940-41, Cessna 207 05-02180 $356.95 05-02269 $427.95 05-02268 $427.95 Pre-war BC-65 Cessna 210 S/N 57841 to 325C $300.95 05-02263 $361.95 05-02264 $361.95 Piper PA-28 Cherokee 58220 A-28, -140, -150, -160, -180, -235 Cessna 210 S/N 58221 to 05-02182 $300.95 05-02266 $361.95 05-02267 $361.95 58510 Cessna 152, A152, F152, Cessna 210 S/N 58511 to 58715 325C $300.95 05-02263 $361.95 05-02264 $361.95 FA152 Cessna 210 S/N 58716 to 58818 326C $357.95 05-02265 $427.95 326G $427.95 Cessna 152, A152, F152, Cessna 210 S/N 58937 + up 05-02183 $331.95 05-02271 $398.95 05-02270 $397.95 FA152 Cessna 310 S/N 35000 to 35546 05-02184 $318.95 05-02272 $381.95 05-02273 $381.95 Cessna 170B S/N Cessna 310 S/N 35547 to 39299 05-02187 $310.95 05-02275 $372.95 05-02274 $372.95 20267+up 1952 to 1955 Cessna 310 S/N 310-0001 to 05-02187 $310.95 05-02275 $372.95 05-02274 $372.95 Cessna 150, A150, F150, 310 K-0245 FA150 Cessna 310 S/N Looo1 to 05-02185 $463.95 05-02277 $556.00 05-02276 $557.00 PA-18,PA-19(L-18C) 310Q0400 PA-20,PA-22 Cessna 310 S/N Q0401+up 05-02186 $515.00 05-02280 $618.00 05-02281 $618.00 Cessna 172,P172,F172
$203.95 Ercoupe 415 or G-Bubble Grumman AA1, AA1A, AA1B $223.95 Grumman AA1,AAA-1A, AA-1B Canopy $351.95 Grumman AA5, AA-5A, AA5B $126.95 Luscombe 8 Series Mooney MK20-21,1959-64 $138.95 Lft. Mooney MK 20-21,1959-64 $234.95 Rt. Mooney 1965-1969 $243.95 (4 cabin Windows) Lft. Mooney 1965-1969 $243.95 (4 cabin Windows) Rt Mooney 1967-1969 $249.95 (6 cabin Windows 1 pc.) $238.95 Mooney M20J and M20K Piper J-3 -Piper PA-12-Round Top $252.95 Piper PA-12 Square Top Piper PA-15, 16, 17 $322.95 Piper PA-22 Tripacer, 108 Colt, Bubble $259.95 Piper PA-23 Apache S/N 1502 + up Rt. $259.95 Piper PA-23-250 S/N 27-2000 +up Lft. $334.95 Piper PA-23-250 $334.95 S/N 27-2000 + up Rt. Piper PA-24 Comanche $312.95 Lft. Piper PA-24 Comanche Rt. $377.95 Piper PA-25 Pawnee S/N 1-655 $377.95 Piper PA-25 Pawnee S/N $309.95 656 + up Piper PA-28 Cherokee $365.95 S/N 1 + up Lft. (.125) $363.95 Piper 28 Cherokee S/N 1 + up Rt. (.125) $365.95 Piper PA-28 Cherokee (.250) Lft. $363.95 Piper PA-28 Cherokee (.250) Rt. $399.95 Piper PA-32-260 S/N 1-7300076 Lft. $427.95 Piper PA-32-260 $361.95 S/N 1-7300076 Rt.
05-02189 $424.95 05-02290 400C $157.95 400SG 100C 101C 133C 134C $113.95 05-02292 $113.95 05-02294 $107.95 05-02296 $107.95 05-02298
05-02190 $140.95 05-02301 05-02192 450C 455C 456C 459C 463C $228.95 05-02303 $117.95 450SG $164.95 05-02305 $187.95 456SG $199.95 05-02308 $199.95 463SG
$261.95 05-02311 $261.95 $270.95 05-02313 $270.95 $270.95 05-02315 $270.95 $165.95 05-02317 $165.95 $165.95 05-02321 $165.95 $130.95 05-02319 $131.95 $130.95 05-02323 $131.95 $134.95 $133.95 490G 491G $133.95 $133.95
05-02194 $138.95 05-02316 05-02195 $138.95 05-02320 485C 486C 490C 491C 905C 907C 492C 493C 795C 508C 552C 553C 650C 651C 055C $110.95 05-02318 $109.95 05-02322 $111.95 $111.95 $131.95 $131.95 490SG 491SG 905SG 907SG
$157.95 05-02324 $157.95 $157.95 05-02325 $157.95 $145.95 05-02327 $145.95 $145.95 05-02329 $145.95 $459.95 05-02331 $459.95 $388.95 $147.95 $147.95 $222.95 05-02333 05-02335 05-02337 05-02339 $388.95 $147.95 $147.95 $221.95 ---$62.00
$123.95 05-02326 $122.95 05-02328 $383.95 05-02330 $324.95 $123.95 $123.95 $185.95 05-02332 05-02334 05-02336 05-02338
303/302C $221.95 303/302SG $266.95 303/302G $265.95 312/CMB $377.95 05-02353 312/CON $361.95 05-02359 360C $156.95 05-02348 $379.95 05-02354 $379.95 $363.95 05-02360 $363.95 $186.95 05-02349 $186.95 $194.95 05-02350 $194.95 $239.95 462G $239.95 $175.95 389G $175.95
183
WINDSHIELDS CANOPIES
HEAVY THICKNESS WINDSHIELDS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
STC Conversions We now carry these STC Conversion extra thick windshields which are FAA approved for the following aircraft and which install as easily as the standard .250 thick windshields. Available in 3 thicknesses.
Beech Bonanza F33 s/n CD-1235 CD 1254 Beech Bonanza G33 s/n CD-1255 CD 1304 Beech Bonanza F33A s/n CE-290 and up Beech Bonanza F33C s/n CJ-26 and up Beech Bonanza 33 thru E33A s/n CD-1 CD-1234,CE-1 - CE-289, CJ-1 CJ-25 Beech Bonanza H35 thru V35A-TC s/n D4866 D9068
Available In Three Thicknesses Part No. Thickness Price 269.312 .312 $869.00 269.375 .375 948.00 269.500 .500 1,098.00 Note: Verify that your serial number is eligible before ordering.
Beech Bonanza V35B thru V-35BTC s/n D9069 and up Beech Bonanza 36 & A36 s/n E-1 and up Beech Bonanza A36TC & B36TC s/n EA-1 and up Beech Baron 58 & 58A s/n TH-1 and up Beech Baron TC58 & 58TCA s/n TK-1 and up Beech Travelair 95 thru E95 s/n TD-1 TD-721
These canopies for homebuilt aircraft are made from the finest quality materials and are available in clear, green or smoke tint. All canopies are shipped via truck or UPS freight collect. Canopies are special order and are non-cancelable and non-returnable. Specify Clear, Green or Smoke Tint. Aircraft Thickness Price Acroduster I (29 or 34 long) 1/8 $395.00 Acroduster II 1/8 $795.00 Acrosport (29 or 34 long) 1/8 $395.00 Barracuda 3/16 $995.00 Berkut 1/8 $895.00 Cassutt Standard (flat wrap) 1/8 $275.00 Cozy Mark IV Canopy 1/8 $537.00 Cozy Mark IV Window Set 1/8 $244.00 Cozy Canopy 1/8 $480.00 Cozy Window Set 1/8 $244.00 EAA Biplane (single seat) (29 or 34 long) 1/8 $395.00 E-Racer 3/16 $795.00 Emeraude 3/16 $1095.00 GP-4 3/16 $995.00 KR-1 .080 $295.00 KR-2 1/8 $395.00 KR-2 (Super Canopy) 1/8 $650.00 Long-EZ 1/8 $795.00 Moni/monerai .080 $760.00 Osprey II Standard Canopy w/o rear windows 1/8 $480.00 Osprey II Bubble Canopy w/rear windows 1/8 $1150.00 Osprey II Rear Window set 1/8 $195.00 Pitts S-1 (bubble style, not factory Pitts) 1/8 $395.00 Quickie (Q1) .080 $395.00 Quickie 2 (Q2) 3/16 $675.00 RV-3 1/8 $495.00 RV-4 1/8 $795.00 Skybolt (rear seat) (29 or 34 long) 1/8 $395.00 Skybolt (full canopy) 1/8 $795.00 Sonerai I 1/8 $295.00 Sonerai II 1/8 $595.00 Sonerai II (extra visibility big canopy) 1/8 $795.00 Starduster I 1/8 $495.00 Starduster II 1/8 $895.00 Starduster II (rear seat only) 1/8 $495.00 T-18 Windshield 3/16 $240.00 VP-1 1/8 $795.00 VP-2 1/8 $795.00 Vari-Eze 1/8 $795.00 Request quote on unlisted models. We can furnish CUSTOM CANOPIES from 3 view drawings. Send detailed sketch or print for quotation.
INDIVIDUAL WINDOWS
Window Aircraft Model No. 231 Aeronca 232 7AC 233 234 225 Aeronca 226 11AC 227 342 Cessna 343 120/140 344 370 Cessna 374 170 362 Cessna 369 180 006 J-3 008 009 010 011 012 436 PA-12 437 438 439 015 PA-16,20 016 22 021 017 019 465 PA-18 466 467 468 469 020 Late PA-20 021 023 Description Left front sliding-forward Left front sliding-rearward Left or Right rear Right front door Left or Right front door (sliding) Left or Right rear (Door) (sliding) Left or Right rear Left or Right door Left or Right rear Left or Right skylight Left or Right rear Left or Right door Left or Right rear Left or Right door Skylight Left front triangle Left pilot sliding Left rear Right rear Right door Left front (sliding) Left rear Door Right rear Right door Right rear Left front stationary Left front sliding Left rear door Right door Right or Left rear Rear sliding Front sliding (left) Left pilot Left or Right square (rear) Left front pilot pilot-vented Each $32.95 $27.95 $44.95 $37.95 $28.95 $28.95 $31.95 $43.50 $31.50 $33.50 $38.00 $52.00 $31.50 $62.50 $34.95 $23.95 $34.95 $33.95 $27.95 $45.95 $28.00 $29.00 $28.00 $24.50 $31.95 $17.95 $27.95 $27.00 $17.95 $47.75 $24.50 $36.50 $36.50 $22.95 $22.95 $26.95 $13.00
TODDS CANOPIES
These optically perfect canopies are the very best quality available. They are superior in quality and less expensive than other sources. The Cozy and AeroCanard canopies include the windows, and the Berkut includes front and rear canopy. Prices include crating, and freight averages $70 to $100. Clear P/N 05-01145 05-01147 05-01149 05-00437 05-01152 05-00439 05-01154 05-01156 05-01158 05-01160 05-01162 05-01164 05-01166 05-01168 Price $400.00 $647.95 $400.00 $532.00 $375.00 $532.00 $701.00 $466.95 $425.00 $489.00 $513.00 $458.00 $455.95 $506.00 Tinted P/N 05-01146 05-01148 05-01151 05-00438 05-01153 05-00440 05-01155 05-01157 05-01159 05-01161 05-01163 05-01165 05-01167 05-01169 Price $450.00 $500.00 $500.00 $532.00 $425.00 $580.95 $534.00 $450.00 $475.00 $489.00 $425.00 $425.00 $499.95 $457.95
Aircraft Spruce stocks replacement windows for Cessna single and twin engine aircraft as well as all windshields and windows manufactured by LP Aero Plastics. Call or email Aircraft Spruce for quotation and specify year, serial number of aircraft and windows required. Call: 1-877-4SPRUCE Email: info@aircraftspruce.com Foam Sealing Tape 1/4x1/16 x 100 roll .... P/N Foam Sealing Tape 1-1/4 x 1/16 x 25 roll P/N Foam Sealing Tape 1-1/4 X 1/16.................. P/N Felt Adhesive-backed 3/32x1-1/2 .............. P/N
An adhesive backed, closed cell foam tapel. Can be wrapped around the edges of the windows to both cushion and seal. Do not stretch during application, it will pull back and leave gaps. Piper used this extensively in their window installations. The 1/4 tape IS used mainly for vent window gaskets. 1/4 x 1/8 x 10 Roll ............ P/N 05-04754 ...........$7.25 1-1/4 x 1/16 x 100 Roll .... P/N 05-04865 .........$39.75
FOAM TAPE
Aircraft AeroCanard Berkut Cozy III Cozy Mark IV ERacer Long EZ Varieze Christian Eagle Harmon Rocket KR2S Osprey RV-3 RV-4 RV-8
184
CM WP ME HA AP LG EP CS IN EL AV TO PS
CESSNA
For Model Glareshield Part No/ Price w/ 12V Lights Part No/ Price w/24V Lights Part No/ Price For Model Part No/
PIPER CONT.
Glareshield Price
120, 140, 150 (thru 05-03871 $295.00 05-03908 $365.00 05-03945 $365.00 F, 1959-1966), 150G thru L (1967-1977), 152 05-03872 $295.00 05-03909 $365.00 05-03946 $365.00 (1978-1986) 170, 170A (1948-1951), 172 05-03873 $295.00 05-03910 $396.95 05-03947 $396.95 (1956-1958) 170B, 1952-1956 05-03874 $295.00 05-03911 $396.95 05-03948 $396.95 172A thru D(196005-03876 $295.00 05-03913 $396.95 05-03950 $396.95 1963), 175 (all) 172 1959 only 05-03875 $295.00 05-03912 $396.95 05-03949 $396.95 172E thru N, 172P, 172Q, 172XP, 05-03877 $295.00 05-03914 $396.95 05-03951 $396.95 Stcd 172RG 1974-1986 (all) 180A thru H, 182 thru D, 185 thru 05-03878 $295.00 05-03915 $396.95 05-03952 $396.95 Stcd E, F Models Prior to 1974 180J, 185 (197405-03879 $295.00 05-03916 $396.95 05-03953 $396.95 1986) 182 (1962-1963) 05-03880 $295.00 05-03917 $396.95 05-03954 $396.95 182 1964-1965 (Early Slight Radius 05-03881 $295.00 05-03920 $396.95 05-03957 $396.95 on Top.) 182 (1969-1974) 05-03884 $295.00 05-03921 $396.95 05-03958 $396.95 182 (1975 only) 182 1976-1986, 182R 205 (1963-1965 early) 05-03885 $295.00 05-03922 $396.95 05-03959 $396.95 05-03886 $295.00 05-03923 $396.95 05-03960 $396.95
PA-28(1964-1967), PA-28-150, 160, 180, 05-03896 $295.00 05-03933 $396.95 05-03971 $396.95 Stcd 235 (Large Hump over Radio Stack) PA-32-260, 300, 301, 301T, 301FT, 301XTC, PA-32S-300, 05-03897 $295.00 05-03934 $396.95 05-03972 $396.95 PA-32R-300, 301T, Stcd 301(SP), 301(HP), PA-32RT-300, 300T PA-34-200, 200T, 220T PA-38 (all) For Model BE-23 05-03898 $295.00 05-03935 $396.95 05-03973 $396.95
BEECHCRAFT
Glareshield Part No/ Price w/ 12V Lights Part No/ Price w/24V Lights Part No/ Price
BE-33 1947-1961, 05-03899 $295.00 05-03936 $396.95 05-03974 $396.95 BE-35 1947-1961 BE-33 1962-1971, BE-35 1962-1971, 05-03901 $295.00 BE-55 1962-1971, BE-95 1962-1971 ---------
BE-33 1962-1971, 05-03903 BE-35 1962-1971, BEWith $365.00 05-03940 $466.95 05-03977 $466.95 55 1962-1971, BE-95 Plenum 1962-1971 BE-33 1972-1983, 05-03905 BE-35 1972-1983, BEWith $365.00 05-03942 $466.95 05-03979 $466.95 36 1971-1983, BE-58 Plenum 1971- 1983 BE-33 1962-1983, 05-03904 $295.00 BE-35 1962-1983 For Model Glareshield Part No/ Price ---------
MOONEY
05-03887 $295.00 05-03924 $396.95 05-03961 $396.95 w/ 12V Lights Part No/ Price w/24V Lights Part No/ Price
206 1965 (Late) -1967 Not avail. for 1968-1969, 210 1965 05-03888 $295.00 05-03925 $396.95 05-03962 $396.95 (Late) -1967 Not avail. for 1968-1969. 206 (1970-1986 ), 05-03889 $295.00 05-03926 $396.95 05-03963 $396.95 210 (1970-1986) 210 (1960-1961) 05-03890 $295.00 05-03927 $396.95 05-03964 $396.95 210 (1962 only) XP210 05-03891 $295.00 05-03928 $396.95 05-03965 $396.95 05-04096 $295.00 05-04097 $473.95 05-04098 $473.95
LIGHTS
PMA Approved Panel Rope Lights, 12 or 24 Volts DC, 18 or 34 Long. Illuminates instruments with 8 or 12 2000+ hour bulbs, respectively.
Lights 12 Volts, 8 Bulbs, 18 24 Volts, 8 Bulbs, 18 12 Volts, 12 Bulbs, 34 24 Volts, 12 Bulbs, 34 Part No. 05-03998 05-03999 05-03994 05-03995 Price $63.00 $122.95 $102.95 $109.50
336 (all), 337 (all) 05-03892 $295.00 05-03929 $396.95 05-03966 $396.95
PIPER
For Model Glareshield Part No/ Price w/ 12V Lights Part No/ Price w/24V Lights Part No/ Price
PA-23 (1956-1963) 05-03893 $295.00 05-03930 $396.95 05-03967 $396.95 PA-24, PA24-250, 05-03894 $295.00 05-03931 $496.95 05-03969 $497.95 260, 400, PA-30 (all) Stcd
PA-28-140, 150, 151, 160, 161, 181, 201T, 235, 236, PA-28S-160, 05-03895 $295.00 05-03932 $396.95 05-03970 $396.95 180, PA-28R-180, Stcd 200, 201, 201T, PA-28RT-201, 201T, PA-44-180, 180T
This Glare Shield kit provides the materials to produce a professional custom padded glare shield. The composite lay-up of material has passed the FAR 25.853 burn requirements and a burn certificate is provided with each kit. Kit includes 1.5 linear yards x 54 wide black SPT Leather-Like Vinyl, 1.5 linear yards x 48 wide 1/8 SPT open cell foam cushioning, two 1/16 x 8 x 50 ABS base material aluminum stiffener, bull nose material, template foam and cardboard template material. Complete easy to follow instruction sheet is provided to help you produce a professional looking padded glare shield that has the look and feel of leather. The electroluminescent Glow Strip Glare Shield Lighting (P/N 11-00848) fits nicely under this Glare Shield. P/N 11-06324 ...................$239.95
BV
185
Cee Baileys Aircraft Plastics has been producing superior replacement windows and windshields for light aircraft since 1955. These windshields are custom built to fit your aircrafts serial number. This handcrafting insures a perfect, distortion-free windshield, trimmed and ground to fit your aircraft with little or no modification. Optical qualities, contour, shape and fit are exceptional. All windshields and windows are FAA/PMA approved. Cee Bailey warranties its products against defective materials and workmanship. Most windows and windshields are available in clear, green, and solar grey. Prices are for clear. Add 15% to prices for green or grey tints. When ordering, specify model number, year, and serial number of the aircraft.
Price $183.00 $183.00 $373.00 $260.00 $299.00 $338.00 $391.00 $178.00 $500.00 $367.00 $296.00 $251.00 $251.00 $281.00 Make/Model 172 (S/N50573 to 72884) 180,182 (S/N52556 to 53598) 182 (S/N 53599 to 55844) 182 (S/N 55845 to 64296) 205, 206, U206, P206 207 210 (S/N 58716 to 58818) Ercoupe - Fornair (bubble type w/s) Grumman - AA1, AA1A, AA1B GrummanCanopy-AA1,AA1A,AA1B Luscombe 8 series Mooney M20, M20a/b/c/d/e prior to 1965 (2pc w/s) Mark21,M20c,Super21,M20e,Master M20d, Executive21 M20f, after 1965 Ranger M20c, Chaparral M20e, Executive M20f, Statesman M20g Navion A/B/D/E/F Std. or flush type (2pc w/s) Navion Rangemaster G&H 2pc w/s Price $365.00 $393.00 $400.00 $450.00 $400.00 $460.00 $454.00 $245.00 $302.00 $328.00 $230.00 $176.00 per side $118.00 per side $230.00 $137.00 per side $137.00 Make/Model Piper J-3 Cub PA-12 square top (late model) PA-12 square top (early model) PA-15/16/17/22 108 colt bubble Apache 23 (S/N 1502 & up) RorL Pawnee 25 (S/N 656 & up) Cherokee PA-28 (.125) RorL Cherokee PA-28 (.250) RorL Stinson HW-75 2pc Stinson Voyager108, 108-1/2/3 2pc w/s Taylorcraft BC-12D, 1946 & up Taylorcraft B 194041 Price $158.00 $261.00 $282.00 $285.00* $250/side $130.00 $142./side $172./side $176./side $171./side $229.00 $229.00
Yak 52 Windshield (4 sections) *all windows available canopy, side win- $395.00 dows, center fixed, aft siding, rear fixed Yak CJ69 (*all windows available canopy, fwd sliding,center fixed,aft $360.00 siding,rear fixed)
* A one-piece fiberglass fairing for Vans Aircraft RV6, RV7, RV9 series aircraft (Slider option) * Designed with generous overlap areas to fit any installation * Built from 4-layers of 8.8oz cloth and epoxy resin. Fully primed and ready for trimming/installation * Save 25+ hours and lots of mess versus the traditional build-up method * Large box is 30x3028, but just 8lbs. P/N 05-03664 ........................................................ $513.00 Micro Vortex Generators from Micro Aerodynamics, Inc. are available for a wide range of aircraft and can reduce stall speed, improve aileron response, improve cross wind control, and reduce landing and takeoff roll. The kits consist of vortex generators mounted on the wings, the horizontal stabilizer, and the vertical stabilizer. The generators are manufactured under FAA/PMA from 6063T6 aluminum and are curved to fit the contour of the wing. Included in the kits are installation tools, detailed drawings and instructions, templates for positioning VGs, spares, Loctite Depend adhesive and all the materials needed for the easy one-day installation. When ordering, specify aircraft, serial number, N number, paint name and number (additional $200.00 to match), make and model, and any modifications to aircraft. Generic VG kit used on LongEZ, RV-4/6/8, Rans, Murphy Rebel and others. Specify Aircraft make and model.
Make/Model CESSNA TWINS 310G thru 310Q 310R & T310R (ZFW & GWI - 180 lbs) 320B/C/D/E/F 310I & 310J 336 & 337 340A, 340, 335 (GWI 300 lbs) 401, 401A, 401B 402, 402A, 402B 402C (ZFW & GWI - 360 lbs) 411, 411A 414 414A, 414AW (ZFW & GWI - 350 lbs) 421, 421A 421B & 421C (GWI - 129 lbs) CESSNA SINGLES 120, 140 Series 150, 152 (all models) 170 Rag Wing 170A, 170B 172, 175 Series 177, 177A, 177B, 177RG, F177RG 180, 185 Series 180, 185 Vertical Tail Upgrade 182 Series 205, 206, 207 Series 210 (all models) BEECHCRAFT TWIN Baron 55 A/B/C/D/E Baron 58, 58A Hawker Beechcraft G58 Baron Baron 58TC, 58P Baron 55 Upgrade kit (w/older VG system) Duke 60, A60, B60 Twin Bonanza Travel Air BEECH SINGLES Musketeer, Sierra, Sundowner Bonanza 35 Series Bonanza 33, 36, A36, A36TC, B36TC Part No. 05-00602 05-00604 05-00605 05-04258 05-04404 05-00606 05-00607 05-00608 05-00609 05-00610 05-00611 05-00613 05-00614 05-00615 05-04393 05-04394 05-04189 05-00616 05-00618 05-04397 05-00617 05-04396 05-04469 05-00619 05-04470 05-00621 05-00623 05-04471 05-00624 05-00625 05-00626 05-00627 05-00628 Price $1,950.00 $2,450.00 $1,950.00 $1,950.00 $1,950.00 $2,950.00 $1,950.00 $1,950.00 $2,950.00 $2,450.00 $1,950.00 $2,950.00 $1,950.00 $2,950.00 $695.00 $695.00 $950.00 $1,450.00 $1,450.00 $1,450.00 $1,450.00 $150.00 $1,450.00 $1,450.00 $1,450.00 $2,450.00 $2,950.00 $2,950.00 $2,450.00 $950.00 $2,450.00 $1,950.00 $1,950.00 Make/Model Beechcraft Debonair 33 Hawker Beechcraft G36 Bonanza PIPER TWINS Aztec PA-23-250 Geronimo PA-23-180 Twin Comanche PA-30, PA-39 Seneca II (ZFWI - 168 lbs) Seneca I, III, IV, V Seminole PA-44-180, PA-44-180T PIPER SINGLE J-3, J-4, J-5, PA-11 (includes the horizontal stabilizer) J-3 Upgrade Kit - Tail VGs on underside of stabilizer provide full-span elevator authority and improve controllability. PA-12/PA-18 PA-15, PA-16, PA-17 PA-22, PA-20 PA-24 Comanche PA-28 All Models PA-32 Cherokee Six, Lance (except T-Tail) PA-32 Saratoga MOONEY M20, M20A, M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K, M20L, M20M, M20R, M20S ROCKWELL COMMANDER 112, 112TC, 112TCA, 114, 114A, 114B, 114TC, 115TC LAKE LA-4, LA-4A, LA-4P LA-4-200, Model 250 AMERICAN CHAMPION Aeronca Champ, Scout Citabria: 7AC, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7JC, 7KC, 7KCAB, 8KCAB, 8GCBC Aeronca Chief: 11AC, S11AC, 11BC, S11BC, 11CC, S11CC Aeronca Sedan: 15AC, S15AC AVIAT Husky A-1, A-1A, A-1B MAULE M-4, M-5, M-6, M-7 MT-7, MX-7, MXT-7, M-8 STINSON 108, 108-1, 108-2, 108-3, 108-5 TAYLORCRAFT Taylorcraft Series AGRICULTURAL Air Tractor, Ayres Thrush, Brave, Cessna 188, Dromader, Weatherly KIT PLANES RV, Murphy Rebel, Long EZ Part No. Price 05-04392 $1,450.00 05-04192 $1,450.00 05-00633 05-00634 05-00635 05-04472 05-04398 05-00636 $1,950.00 $1,950.00 $1,950.00 $1,950.00 $1,950.00 $1,950.00
RV WINDSHIELD FAIRING
05-00640 $695.00 10-04227 $150.00 05-00639 05-04399 05-00641 05-04401 05-00642 05-00939 05-00938 $695.00 $695.00 $695.00 $1,450.00 $1,450.00 $1,658.00 $1,450.00
05-04402 $1,450.00 05-00646 $1,450.00 05-00647 $1,950.00 05-00644 $695.00 05-04473 05-04190 05-00643 05-00645 05-04403 05-01208 $695.00 $950.00 $695.00 $695.00 $695.00 $695.00
186
VORTELATOR KITS
254 SERIES VORTELATOR KITS FOR HOMEBUILT AIRCRAFT
Can increase your homebuilt aircraft speed by 4 to 7.5 mph. This is accomplished by placing vortelators at certain critical locations which will cause the boundary layer to stay attached to flying surfaces for a greater distance, and to keep the boundary layer thinner. The net result of these two actions is that it reduces both the profile drag and skin friction drag components of the parasite drag. Contains a 100 foot roll of vortelator, more than enough for most homebuilts, plus clear instructions with pictures on how to determine where to, and how to, place the vortelators to increase your aircrafts speed. Though its not a requirement for homebuilt aircraft these vortelators are FAA STCd and manufactured under a FAA PMA because they are also approved for certified aircraft. That means you get the benefit of FAA certified aircraft parts. The booklet 120-1 Fly to use less fuel (PN 08-00732) includes an adhesive backed aluminum placard to list the working airspeeds of your aircraft.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Kit Number 254-AD 254-RV3 254-RV4 254-RV6/6A 254-RV7/7A 254-RV8/8A 254LANCAIR 254-T18
Description or Effect of Installing Vortelator Kit Delineates a procedure for determining where vortelators should be placed on an aircraft, for increased speed, by visualizing surface air flow through simple flight tests at straight and level flight at cruising speed. This kit is ideal for those aircraft models that do not have enough aircraft out in the field for Aircraft Development to economically warrant the time and expense of developing kits for. The vortelating of the airframes of these RV aircraft will give about a 4 to 5 MPH increase in speed and a decrease in the stalling of about 2 MPH. The vortelating of the propellers of these aircraft is more random in nature. From flight tests the increase in speed can be from 2 to 4 MPH depending on the propeller used. The vortelator kit for the RV6A takes about 8 hours to install on the aircraft. Between the decrease in stall speed and the increase in the aircrafts speed one gets about 7 MPH or more of additional MPH usage. The vortelating of the airframes of the Lancair 235, 320, 360 aircraft will give about a 4 to 5 MPH increase in speed. The vortelating of propellers of these aircraft is more random in nature. From flight tests the increase in speed can be from 2 to 4 MPH depending on the propeller used. The vortelating of the airframes of the T-18 aircraft will give about a 4 to 5 MPH increase in speed. The vortelating of propellers of the aircraft is more random in nature. From flight tests the increase in speed can be from 2 to 4 MPH depending on the propeller used.
Description Vortelator Kit 254-AD Vortelator RV3 Kit 254-RV3 Vortelator RV4 Kit 254-RV4 Vortelator RV6/6A Kit
Description Vortelator RV7/7A kit Vortelator RV8/8A kit Vortelator Kit for Lancair Vortelator kit for T18 254-T18
246-100 CESSNA VORTELATOR KIT - can increase Cessna speeds by up to 6 MPH. This is accomplished by placing vortelators at certain critical locations which cause the boundary layer to stay attached to flying surfaces for a greater distance, and to keep the boundary layer thinner. The basic procedure for installing the kit is to prepare the surface to which the vortelator is going to be applied by thoroughly cleaning the surface. Then simply peel the liner backing off the adhesive back vortelator and apply it to the cleaned surface. The vortelator is clear and therefore takes on the color of the surface to which it is applied. This vortelator kit is FAA STCd and manufactured under a FAA PMA approval. The kit comes with 200 feet of vortelator, more than enough for one airplane, and clear simple instructions on how to install the kit. The kit can easily be installed in one day and will add about 5 ounces of weight to the aircraft and not change the handling qualities of the aircraft. Please visit our website for a list of FAA approved Cessna models................................................................................................ P/N 08-00731 ............................................................................... $750.00 FLY TO USE LESS FUEL - Explains the working speeds of the aircraft such as, steepest climb speed, best rate of climb speed from 0 to 5,000 ft., best rate of climb speed from 5,000 to 10,000 ft., speed of most flight time per gallon of fuel, speed of most miles per gallon of fuel, speed of slowest decent power off, speed of shallowest glide. It explains these working speeds of the aircraft in simple to understand graphics, no complicated mathematical formulas used. And whats even better theres no need to do a time consuming flight test program to determine the working speeds of your aircraft. Or for that matter any type certified aircraft. This booklet gives simple multiplication factors, based on cruising speed, to determine the working speeds for your homebuilt aircraft. Knowing the speed to fly at to go the greatest distance or stay up the greatest amount of time can be critical under certain conditions. Flying your aircraft using the techniques described in this booklet will save on the cost of gasoline an item that will only continue to escalate in cost as time goes by. This booklet comes with an adhesive backed aluminum placard to list the working airspeeds of your aircraft Fly To Use Less Fuel booklet......................P/N 08-00732 ............. $19.95
Capable of increasing your aircraft speed and RPMs. This is accomplished by placing vortelators at certain critical locations on the propellers most inefficient highest air drag areas. The vortelators will cause the boundary layer to stay attached to the propeller surface for a greater distance, and to keep the boundary layer thinner. Though its not a requirement for ultralight or homebuilt aircraft these vortelators are FAA STCd and manufactured under a FAA PMA because they are also approved for certified aircraft. Contains a three foot strip of vortelator, more than enough to vortelate up to a three bladed propeller. Plus clear instructions with pictures on where to place the vortelators on the propeller. The vortelator kit weighs less than .05 ounces and takes less than a half hour to install. The vortelators have a pressure sensitive adhesive backing so the installation process is simply to clean the area of the propeller where the vortelators will be placed and stick them on to the propeller. Can be used on virtually all propellers that are attached to engines of less than 500 HP be they metal, composite, or wood are approved for the installation of vortelator kits. This kit is not recommended for propellers that are equipped with anti-icing devices. 259-100 Propeller Vortelator Kit for Ultralight Aircraft - Capable of INCREASING Your ultralight aircraft speed by 2 to 5 mph and increasing your engine speed by up to 150 rpm. P/N 05-01465........................................$33.75 259-200 Propeller Vortelator Kit for Homebuilt Aircraft - Capable of Increasing your homebuilt aircraft speed by 2 to 4 mph and your rpm by 20 to 50 rpm. Thats if you have a fixed pitch propeller. If you have a constant speed propeller, for a given RPM and manifold pressure the propeller will be at a slightly larger pitch giving you more speed. P/N 05-01466........................................$33.75 260-100 Propeller Vortelator Kit for Certified Aircraft - Of increasing your aircraft speed by 2 to 4 mph and your rpm by 20 to 50 rpm. Thats if you have a fixed pitch propeller. If you have a constant speed propeller, for a given RPM and manifold pressure the propeller will be at a slightly larger pitch giving you more speed. Please visit our website for a list of FAA approved propeller models P/N 05-01467......................................$104.95 The vortex generators are precision injected molded and made from UV stabilized clear polycarbonate material. This material is extremely strong and lightweight. 100 vortex generators will weigh approximately 1 ounce. The bottom of the vortex generator has a slight curve to match the wings airfoil. They have a full sweeping sail which wind tunnel testing has shown to be superior to those with a flat top. The vortex generator has a base of 1.0 X .40. There are many advantages to this kit: 1) increased lift, 2) slower stall speed by 4 to 6 MPH, 3) shorter landing distances, 4) shorter takeoff distances, 5) higher angle of climb, 6) tighter turns, 7) gentler stalls, 8) better aileron authority at slow speed, 9) aircraft is more controllable at slow speed, 10) in general increased total performance and safety. These kits come with clearly written installations instructions that allow you to determine where on the aircraft to install the vortex generators. also includes the number of vortex generators (VGs) listed in the table below for the kit selected. Plus a 3M very high bond adhesive tape. Kit No. Description of Vortex Generator Kit No. of VGs Part No. Price 261-AD1 Deluxe generic vortex generator STOL kit for homebuilt aircraft 150 05-01776 $375.00 261-AD2 Generic Vortex Generator STOL Kit for Homebuilt Aircraft 65 05-01780 $168.95 261-RV1 Vortex Generator STOL Kit for the RV-3 Aircraft 261-RV1 Vortex Generator STOL Kit for the RV-4 Aircraft 261-RV1 Vortex Generator STOL Kit for the RV-6/6A Aircraft 65 05-01777 $225.00 261-RV1 Vortex Generator STOL Kit for the RV-7/7A Aircraft 261-RV1 Vortex Generator STOL Kit for the RV-8/8A Aircraft
187
The Ventube is a plastic unit that consists of an exterior tube and a lockable interior tube with a cap. Air flow control is accomplished by extending or retracting the interior tube. Ventube enhances pilot and passenger comfort, allows reliable closure of the air vent, controls vent direction and flow, and reduces air vent noise and leakage. FAA approved for Cessna 120, 140, 150, 152, 170, 172, 175, 180, 182, 185, 190, 195, 205, 206, 207, 210-210F, and 305. Detailed instructions, STC, FAA Form 337, etc. are enclosed with each pair. P/N 05-04091 ............... $94.65/pr. Improves the cabin airflow in General Aviation aircraft, specifically Cessnas. Combined with Ventubes they enhance the pilot and passengers comfort (cooling & heating), allow reliable closure of the inlet air vents, control cabin air direction, increase cabin air flow, and reduce inlet air noise and leakage. The kit consists of two cabin exit vents, CEV, to allow the cabin air to exit into the aft fuselage and the fuselage exit vent, FEV in the modified inspection plate, to allow the cabin air to exit the fuselage of the aircraft. P/N 05-04080 .......... $76.75 Ventubes (pair) - controls air flow into the cabin. Cabin Exit Vents - allows air to exit to fuselage. Fuselage Exit Vent - allows air to exit the aircraft. P/N 13-03577 ........ $151.95 Knob adjustment permits complete control of cabin air. Mounts at four points in 2-1/2 dia. hole. P/N 13-03500 ........... $19.75 Aluminum 90 elbow type. Knurled collar rotates to control air volume. Mounts to a 2 1/2 in. Dia flange. For 11/4 Id scat ducting. Also good for cabin heat vents. P/N 05-04075 ........... $79.50 Large molded plastic vent with 40 swivel. Thumb operated closure controls degree of opening. Mounts in 2-1/2 dia. hole. Large orifice (1-3/4) provides maximum cooling. Mounting in floor of aircraft assures full cabin ventilation. Use with SCAT-11 ducting. Black ...............P/N 05-04073 ........... $18.50 Ivory ................P/N 05-04071 ........... $18.50 The Ultimate Ventilator is machined from aluminum block and comes with holes tapped for 4-40 screws. 1.75 disk articulates out into airstream and does not leak when closed. Very popular with T-18 & RV builders. P/N 05-04090 $93.50 Adjustable plastic ventilators for use as fresh air intakes or air exhausts. Easily installed in plastic windshield or metal cowling. Two sizes: MODEL A-2-100 Mounts in a 2 dia. opening. Can be turned to provide any degree of ventilation. The Off position is with the opening downward. P/N 05-01178 ......$15.25/pr. MODEL CC3251 Mounts in 31/4 dia. opening. Rotates to provide any degree of ventilation. Retracts to a closed position nearly flush with the mounting surface. P/N 05-01179 ......$17.75/pr. MODEL F325A Large tabs on lower flange and tapered profile make this vent ideal for higher airspeeds. Mounts in 3-1/4 opening in plastic windshield or metal cowling. P/N 05-04088 ......$13.75/pr. MODEL F318 Tapered in profile in back provides a more direct flow of air. Mounted in 3-3/16 opening in plastic windshields or metal cowling. P/N 05-04089 .......$13.75pr.
Manufactured under our FAA PMA from aircraft grade aluminum and are alodined to a mil-spec, ready to accept paint before installation. Included in each kit are installation tools, computer cut templates, detailed illustrated drawings and instructions, and Loctite Depend Adhesive for installing the vortex generators on your airplane. Description Part No. Price Cessna 310I/310J 05-04258 $1,950.00 Cessna 402B 05-04259 $1,950.00 Cessna 421C 05-04261 $2,950.00 Cessna (T)210 SER 05-04264 $1,450.00 Cessna P210N 05-04265 $1,450.00 Cessna P210R 05-04266 $1,450.00 Stolspeed VGs are streamlined for less drag and better appearance than other VGs. Stolspeed VGs have no sharp points and are flexible, so its easier to wash or cover the wings. The special 3M adhesive is removable without damaging aircraft paint. Stolspeed VGs have a very slim rounded fin to give them good flexibility, and a rounded, tapered base that flows into the wing surface. In clear material theyre almost invisible. 80 (Enough for the tail).................................... P/N 05-04458 ...... $69.95 120 (Enough for the main wing plus spares) .. P/N 05-04457 ...... $99.95
VISTA-VENTS
WHISPERFLO VENTILATORS
ULTIMATE VENTILATOR
Aluminum airline style eyeball air vent swivels to direct air where needed.Knurled collar of outlet rotates to control air volume. Mounts in 1-7/8 dia. hole. P/N 05-04065........ $194.95
AV TO PS BV
The extension on the back of these aluminum eyeball air vents is very narrow and allows little room to attach SCAT ducting. This adapter enables the user to attach 2 diameter SCAT ducting to the back of the vent using a stainless steep clamp. P/N 05-04067 ........ $17.65 This high quality, economical swivel air vent is made from 2024T351 aluminum and is available anodized black or grey. Diameter of the flange is 2.75 and the vent is designed to Front Back attach with a standard 2 air duct flange. The P/N 05-00779 vent hole of this eyeball swivel vent is 7/8. The knurled collar on the vent swivels 60 to adjust air volume anddirect air flow as desired. The vent features 4 mounting holes (1/8 dia.) which are spaced 2-3/8 apart or a mounting plate with a thickness of .71. Made in USA Eyeball Swivel Vent - Black ................P/N 05-00779 .......... $59.75 Eyeball Swivel Vent - Grey .................P/N 05-00787 .......... $59.75 These ball and socket air vents are injection molded T grade ABS. The vent orifice is 1 dia., and the ball swivels 45. The mounting flange is 2-1/8 square, and the distance between mounting hold centers is 1-11/16. Mounts in 1.75 dia. hole & uses 1-3/4 ducting. Wt: 1.25 oz. ea. Gray ......P/N 05-04082 ..... $17.95 White.... P/N 13-01943 . $17.95 Black .....P/N 05-04079 ..... $17.95 Beige.... P/N 05-04081 . $17.95
Solar Powered Cockpit ventilator installs in place of the normal can type vent while the aircraft is parked. An 8ft cord allows use with the panel on the glare shield or outside the aircraft when an outsidecover is used. The system provides a minimum of 7CFM airflow through the cabin per vent. The fan is a ball bearing design with a 10,000 hr design life. Made from aircraft grade aluminum. The Solar Panel is injection molded acrylic with an integral lens system. Standard .......................................P/N 05-04072 ..... $129.95 For Cessnas with ventubes ..........P/N 05-04074 ..... $113.95
Replaces the forward cabin vent. Features durable Wemac air vents, full/partial closure, directional control, and postive shut-off. All metal construction. Completely replaces the old style, plastic overhead fresh air vents in most Cessna 210 aircraft. Full system includes the forward center, and aft systems. STC approved. Full system..........................................P/N 05-04092 ......$1,538.00 Pilot & Co-Pilot....................................P/N 05-04083 .........$958.00 Center Vents (total of 2 units).............P/N 05-04085 .........$297.95 Rear Vents (total of 2 units)................P/N 05-04087 .........$490.95
188
DEFROSTER/AIR VENT
AveoAir Ball Vents are machined from 2024 aluminum alloy, and these lightweight vents are anodized in your choice of 5 color finishes. Installation is simple with the 2-piece design, no screws are required as they are simple thread together to hold securely. ONLY AVEO VENTS come with a choice of 3 rear standard SCAT tube coupler diameters so you can optimize your air flow. Choose from 1.5, 1.75 or 2.0 diameters (38 mm, 44 mm, 50 mm).
Black Silver Green Blue Gold 1.5 Inch 05-04198 05-04199 05-04201 05-04202 05-04203 $89.95 $92.50 $99.75 $99.75 $99.75 Black Silver Green Blue Gold 1.75 Inch 05-04459 05-04460 05-04461 05-04462 05-04463 $92.50 $92.50 $99.75 $99.75 $99.75 Black Silver Green Blue Gold 2.0 Inch 05-04464 05-04465 05-04466 05-04467 05-04468 $89.95 $89.85 $99.75 $99.75 $99.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This The round flange version of our large square-flange eyeball vent. Fits in a 2-3/4 hole, and has a 3 outside flange diameter. w/ 2 Scat Adptr., Black ........... P/N 05-04064 ....$163.50 w/ 2 Scat Adptr., Clear ........... P/N 05-04066 ....$163.50 w/ Plenum Nut, Clear ............... P/N 05-04414 ....$161.95 w/ Plenum Nut, Black............... P/N 05-04415 ....$161.95
These high quality vents have a nylon/delrin bushing encapsulated between the eyeball and the flange to protect the aluminum! With these vents you simply cut a hole, install the vent and tighten the plenum or retaining nut behind it and hook up the tubing! The vents include everything needed for install. On the small vents you can just directly attach a 2 scat tube to the vent - and on the large vents they have 2 plenums. These will come with a BAC part number on them, but thats because they are normally for the cockpits
Description 1 1/4 Aluminum Eyeball Vent - (Air outlet size). Anodized BLACK. OD is 2 and allows for direct connection of a 2 scat tube. AV125B 1 1/4 Aluminum Eyeball Vent - (Air outlet size). Anodized CLEAR. OD is 2 and allows for direct connection of a 2 scat tube. AV125C 1 3/4 Aluminum Eyeball Vent - (Air outlet size). Anodized BLACK. OD is 2 3/4 (hole size required for mounting). INCLUDES 2 Plenum Cup. AV1625B 1 3/4 Aluminum Eyeball Vent - (Air outlet size). Anodized CLEAR. OD is 2 3/4 (hole size required for mounting). INCLUDES 2 Plenum Cup. AV1625C PN 05-04061 05-04063 05-04084 05-04086 Price $117.85 $117.85 $124.95 $124.95
44% larger outlet diameter now you can get greater air flow in low speed aircraft and low-flow situations. Available with 1.5" or 2.0" diameter rear SCAT adapters and made to the same fine standards as the standard AveoAir vents. CNC machined from 2024 aluminum. Anodized in silver or black. Single-hand operation. Easy install. Fits all SCAT tubing. Adjustable air flow Black 1.5" ......................................P/N 05-04649 .......................$114.75 Black 1.75.....................................P/N 05-04935 .......................$114.75 Black 2" .........................................P/N 05-04650 .......................$114.75 Silver 1.5" ......................................P/N 05-04651 .......................$114.75 Silver 1.75 ....................................P/N 05-04936 .......................$114.75 Silver 2" .........................................P/N 05-04652 .......................$114.75
NACA INLETS
Small round-flange eyeball vent. Made from aircraft-grade 6061-T6 aluminum and hard anodized, it weighs just 3 oz. and mounts in a 2 round hole. Outside flange diameter is 2-1/4, and has 25 degrees of freedom from the vent centerline. The vent is secured with a mounting ring that will accept a 1-1/2 or 2 scat hose OR a plenum mounting nut. This vent has an opening of 1.2 which is larger then competitive vents that mount in the same size hole. w/ 1-1/2 Scat Adptr., Aluminum ............. P/N 05-04410 ............$151.95 w/ 1-1/2 Scat Adptr., Black..................... P/N 05-04411 ............$151.95 w/ 2 Scat Adptr., Aluminum.................... P/N 05-01903 ............$168.95 w/ 2 Scat Adptr., Black ........................... P/N 05-01904 ............$168.95 w/ Plenum Nut, Aluminum ....................... P/N 05-04412 ............$151.95 w/ Plenum Nut, Black .............................. P/N 05-04413 ............$168.95 Large square-flange eyeball vent. Made from aircraft-grade 6061-T6 aluminum and hard anodized, it weighs just 5 oz. and mounts in a 2-3/4 hole. The mounting flange is 3 square with a 2-1/2 mounting hole pattern, and has 25 degrees of freedom from the vent centerline (50% more than in our first generation vents.) This is a direct replacement for the whisperflo black plastic vents. Flows 30% more air and eliminates 99% of the leakage associated with the plastic vents when closed. Aluminum...P/N 05-04068 .. $168.95 Black ... P/N 05-04070 ...$153.95
This large NACA scoop is the largest inlet available anywhere. 0 axes of air flow 17", 90 axes total width, 10 inches with a 9" x 2" outlet or 18 square inches. A separate two-part duct can be purchased separately. This allows the user to take the air directly into a 2" or 4" hose connection. These parts are made with a high impact polycarbonate, formed at 375 F. They will remain stable and not delaminate at a high temperature, like the gel-coated fiberglass inlets. Cameron NACA inlet 006-TR-A (Scoop Only)....P/N 05-01701 ....$78.85 Cameron NACA inlet 006-TR-B (2 Req. for ea.)....P/N 05-01702 ....$44.50
Small square-flange eyeball vent. Made from aircraft-grade 6061-T6 aluminum and hard anodized, it weighs just 3 oz. Mounting flange is 2.20 square, with a hole mounting pattern of 1.70. Vent adjustment is 25 degrees of freedom from the vent centerline, amd has an opening of 1.2 which is much larger than vents typical of this size. Aluminum .............P/N 05-01905 .........$168.95 Black ....................P/N 05-01906 .........$168.95 Defrost vents designed to fit in AA series Grumman airplanes and can also be used in Experimentals. They will fit the original hole pattern on the Grummans, but the area where the scat tube is attached has been changed to a full round 1 12 dia. These parts have passed FAA burn tests. A sliding piece can be adjusted to vary the amount of air being used to defrost. The mounting area is 2 14 x 3 34, with six 6-32 attaching screws, not provided. Comes as a pair. P/N 05-04062 ............... $60.00
This light weight, infused aerospace carbon fiber fairing is perfect for finishing off those items that protrude from your airframe. Clean up the air flow and be pleasing to the eye. Perfect to clean up: cables; trim control rods; overflow hoses; general aerodynamic cover. This product is now supplied in a black carbon finish - NOT white gel coat as shown. Sizes: Width 1-1/2, 37mm plus flange. Length 7, 175mm plus flange. Depth 7/8 22mm. P/N 05-04863 ...................$18.75
189
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These universal spring loaded latches are designed for aircraft canopies, cockpit doors, and baggage doors. They are available in right hand and left hand models with different striker angle lock pins on the two models. These latches work great on a wide variety of experimental aircraft. Left hand latch (Lock Pin) P/N 05-04520...............................$33.95 Right hand latch (Lock Pin) P/N 05-04521...............................$33.95 Also available in retracted bolt lock type latch with blunt striker (left hand and right hand). Left hand latch (Retracted Bolt Lock) P/N 05-00895...............................$35.65 Right hand latch (Retracted Bolt Lock) P/N 05-00896...............................$35.65
2 heavy-duty channels of 2014T6 anodized aluminum provide smooth sliding tracks for canopy installations. Length 23 fully retracted, 45 fully extended. 22 travel. Wt:3.5 lbs./pair. Used on Pazmany 1 & 2, Skybolts & others. Instructions for installing these rails in the Pazmany PL-2 are available for $50 from Pazmany Aircraft Corp., P.O. Box 80051, San Diego, CA 92138. These instructions are a useful reference for installing channels in any homebuilt aircraft. P/N 03-49300 ................... $694.00/ea.
3D view Opening from Exterior Interior View Open Position This door latch was originally designed for a gull wing door with linkage rods extending both forward and aft, however it can be adapted to virtually any style door with appropriately designed linkage rods. The linkage rods are not included. Features: Identically keyed locks for set Armrest flush mount interior handle Spring loaded, flush mount exterior handle Spring ball detent for positive open/ closed stop action Specifications: Made from 2024-T3 aluminum Each latch weighs approx. 10 ounces Dimensions for applicability pictured below Driver travel approx. 1.25 forward and aft For linkage rods the following aluminum is recommended: 1/4 x 1/2 2024T3 ............................................ P/N 03-00104 ......................... $1.98 Left Hand Door Latch ...................... P/N 05-01415 ..................... $265.00 Right Hand Door Latch.................... P/N 05-01416 ..................... $265.00 Set of Left/Right Latches ................. P/N 05-01420 ..................... $530.00 Lock your RV with confidence. Finally, a lock for your sliding canopy that installs in minutes. Tools required are one 1/4 drill bit and a drill. All you have to do is drill a hole, deburr and start using your lock. No more worries about having your avionics or your personables in someone elses aircraft. P/N 05-01414 ......... $133.95 The gas spring is a self-contained counterbalance unit consisting of a piston and piston rod in a hermetically closed cylinder. The cylinder is factory-loaded with an inert gas at a given pressure. The outward force generated is continuous and linear at 45 lbs. Ideal for a canopy closure on homebuilts, as designed for George Meads Adventure. Stroke 3.15. P/N 05-01177 ............................$19.75
when the original factory seal remains intact, making it the perfect design for exterior installations. With a six year repack schedule and versatile mounting hardware, it is one of the most popular systems. SOFTPACK - The BRS Softpack is best suited for aircraft manufacturers that require a ballistic parachute mounted inside their aircraft. When mounted internally, this system also has a six year repack schedule.. VLS - Built specifically for aircraft with limited interior space, the VLS (Vertical Launch System) installs on top of the wing or fuselage. Upward firing works well with pusher designed aircraft.
BRS-6 System Maximum System DimenWeight Weight sion Part No. (lbs./kg) (lbs./kg) L x W x D 600/272 600/272 600/272 800/363 800/363 800/363 1,050/475 1,050/475 1,050/475 22/10 18/9 23/11 23/11 19/10 25/12 28/13 24/11 29/13 29/13 34/15 33/15 35/16 8x7 round 10 x10 x5.5 Price
DOOR STEWARD
600 Canister 600 Softpack 600 VLS 800 Canister 800 Softpack HD 800 VLS 1050 Canister 1050 Softpack HD 1050 VLS
18 x 11.5 13-04073 $3,660.00 x7.5 21.5 x 7 round 10 x 11 x5.5 13-04075 $3,718.00 13-04076 $3,481.00
18 x 11.5 13-04077 $3,954.00 x 5.5 21.5 x 7 round 10 x 11 x5.5 13-32445 $4,362.00 13-32446 $4,132.00
The Door Steward is an STC and FAA-PMA approved modification for aircraft doors. The modern gas spring greatly improves and replaces easily broken, malfunctioning mechanical type door stops and restraints that become ineffectual with repeated use and age. Pilots enjoy the fact that the Door Steward gently opens and firmly holds the door open. The Door Steward consists of a modern inert gas spring with all the necessary brackets and hardware. Detailed installation instructions are included and make it easy to install and requires virtually no maintenance. Model 200C10 Features: With the Door Steward the door will open and stay open when needed. No more door flopping around in wind gusts or prop wash from taxiing aircraft. The cost is usually much less than repairing or replacing existing OEM door stops. Great on float equipped aircraft when water taxiing.. FAA Approved on many single and light twins. Application Cessna 170,172, 175, 180, 182, 185, 205, 206, 207 and 210(nonpressurized) Beech model Series 33, 35, 36, 55, 56, 58 and 95 Piper Model Series 23, 24, 28, 30, 32, 34, 39, 40 and 44 Fwd Utility Door Cessna 206, 206H, U206, TU206 and 207 Cessna 177, 177A, 177B and 177RG Part No. 05-00922 05-03574 05-03575 05-04251 Price $347.00 $210.00 $150.00 $428.00
18 x 11 x 13-32445- $4,486.00 5.5 VLS 15 x 10.5 13-04079 $5,077.00 x6 18 x 11.5 13-04080 $5,313.00 x 5.5 20 x 8.5 x9 13-04081 $7,095.00 13-04082 $6,968.00
1350 Softpack LSA 1,350/612 1350 VLS 1350 High Speed 1600 Softpack HD 1,350/612 1,350/612 1,600/726
190
These 1 diameter spring loaded access doors can be riveted into your wheel pants. They open inward, so that using an appropriate tool, you can check pressure or inflate your tires easily without removing the wheel pants. Made of stainless steel which can be polished if desired. P/N 05-02124 .....................$22.75 ea.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Can be used on Pitts, Eagle, Skybolt etc. Preformed leading edge to replace metal leading egde. Adds strength to stock or modified wings. Set comes with all 5 pcs. to glue directly to the wings. For S-1 ...........P/N 05-00918 ..............$487.95 For Experimental S-2, Eagle, Skybolt P/N 05-00919 ..............$634.00
Spades used on aerobatic aircraft like Pitts Special. Comes with arm and plate P/N 05-00917 ........................ $199.75
SPADES
This line of carbon fiber cowlings are a part for part replacement for Cessna cowlings. These cowlings install just like the original Cessna parts, however no hardware is provided. North Central Aircraft Products are made of the finest quality carbon fiber and resin and are STCd and PMAd. Complete cowls are available on request.
172 Series - Upper Nose Cap - 300 Serial No. Description 28000-36965 Std. Nose Cap 36966-47746 Elliptical Nose Cap 47747-53392 1/4 Nose Cap-Cont. 67585-75034 Std. Nose Cap - Lyc. Single Light 63459-67584 Std. Nose Cap - Lyc. Dual Light 75035-76673 Std. Nose Cap- Camloc-Lyc. 75869-76516 Std. Nose Cap- Camloc-Lyc. 172 Series - Lower Nose Cap - 600 Serial No. Description 28000-36965 Std. Center Piece Nose Cap 36966-477-46 Elliptical Nose Cap 47747-53392 Cont. 3/4 Nose Cap 53393-67584 Cont. Standard Nose Cap 56513-75034 Std. Nose Cap - Lyc. No Light 75035-76673 Std. Nose Cap - Lyc. No Light 59224-63458 Std. Nose Cap - Lyc. Single Light 63459-75034 Std. Nose Cap - Lyc. Single Light 61899-63458 Std. Nose Cap - Lyc. Dual Light 63459-67584 Std. Nose Cap - Lyc. Dual Light 75869-76516 Std. Nose Cap - Lyc. No Light Part No. 05-04664 05-04665 05-04666 05-04667 05-04668 05-04669 05-04670 Part No. 05-04671 05-04672 05-04673 05-04674 05-04675 05-04676 05-04677 05-04678 05-04679 05-04680 05-04681 Price $850.00 $815.00 $270.95 $760.00 $760.00 $760.00 $760.00 Price $850.00 $815.00 $730.00 $730.00 $730.00 $730.00 $730.00 $730.00 $730.00 $730.00 $730.00
180/182 Series - Upper Nose Cap - 300 Serial No. Description Part No. Price 30000-32661 Upper Nose Cap- Ctr. Nose- Screws 05-04682 $790.00 32662-50661 Upper Nose Cap- Elliptical Nose- Screws 05-04683 $790.00 33000-51556 50662-50911 51557-53007 Upper Nose Cap - 185 Style - Screws 05-04684 $990.00 50912-51980 Upper Nose Cap - 185 Style - Camloc 05-04685 $990.00 51981-53203 Upper Nose Cap - Rev. CL Nose RH to Dzus 05-04686 $990.00 180/182 Series - Lower Nose Cap - 600 Serial No. Description Part No. Price 3000-32661 Lower Nose Cap- Ctr. Nose- Screws 05-04687 $930.00 62662-50661 Lower Nose Cap- Elliptical 05-04688 $810.00 Nose- Screws 33000-51556 50662-50911 51557-53007 50912-51980 Lower Nose Cap - 185 Style - Screws 05-04689 $1,040.00
Collard Slotted Fasteners $421.95 Collard Slotted 36 Fasteners Collard Slotted 26 Fasteners Phillips Head 1/4 Turn Fasteners 1/4 Turn Fasteners 1/4 Turn Fasteners $355.95 $215.95 $250.95 $477.95 $336.95 $295.95
68-73 51981-52284
185 Style - Camloc 05-04690 $1,040.00 Lower Nose Cap - Rev. CL Nose RH 05-04691 $1,040.00 to Dzus 73-81 52285-53203 Lower Nose Cap - Addes Landing Lights 05-04692 $1,350.00
191
FIBERGLASS COWLINGS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No. 04-01486 04-01473 04-01487 All parts are aircraft quality, hand layed for uniform thickness and light weight. Items are finished with grey primer gel coat which minimizes sanding and eliminates the need for primer paint. Note: Light sanding is required to remove mold release wax residue from surface of all fiberglass items prior to painting. Styled after the Piper Comanche, this cowl can be used on just about any homebuilt powered by the Lycoming engine. It is made in two parts, allowing the easy removal of the cowl without having to remove the prop. Used on the following airplanes: Starduster I and II, Playboy, EAA Bipe, Jodel D-11, Tailwind, Tempete & the Skybolt. Measures 35 wide by 21 high. Will accommodate a spinner approx. 12 in dia. P/N 05-01180 .............. $91.50
Identical to the MC-3B, but, has an opening for an oil cooler. Measures 35 wide by 21 high. P/N 05-01186 ........ $114.95
Similar in shape and dimensions as the MC-1A cowl except, it is manufactured as a one piece unit for those who prefer a cleaner front end. The MC-1B is a few inches larger than the MC-1A. P/N 05-01181 ............ $112.95
This nose cowl was designed for the T-18 pressure cowl system. A 4-inch prop extension is required and it is generally used with the MC-5 Bottom Cowl. Measures 36 wide by 20high. Face of center opening 12-1/2 O.D. P/N 05-00551 ........ $114.95
This design can be used with most any Continental or Lycoming engine. Used on the original Smith Miniplane but has been installed on the Pitts, EAA Bipe, Playboy, Flybaby & Baby Great Lakes. Measures 35wide by 19.5 high.Face of center opening 8-1/2 O.D. P/N 05-01182 ............ $114.95
Originally made for the Thorp T-18, this cowl has been used on several other types. The starter ring is enclosed when used with the Lycoming. Makes a nice front end on the CA-61 & CA-65. Measures 35W by 19.5 high. Face of center opening 13-3/8 O.D. P/N 05-01176 ........ $114.95
Suitable for just about any Lycoming powered aircraft, this cowl comes equipped with a bump that conceals the starter motor. It is the standard Pitts Special cowl but has been installed on these aircraft: Mong, Miniplane, Playboy, Emeraude, Playmate, Baby Ace, Junior Ace, EAA Bipe, Baby Great Lakes, Skyhopper and the Falconar F-11 & 12 series. Measures 35-1/2 wide and 22-1/2 high. Center opening 8-1/ 2 dia. P/N 05-01183 ............ $113.95
These Dzus over the center type latches are used extensively on cowl doors and other applications on aircraft such as Cessna, Piper, Grumman, and many homebuilts. Available in 2 styles as shown.
Same shape and size as used on the Piper PA-14. Can be used on the same aircraft as listed for the MC-3A design. For builders not wishing to use an electrical system and is seen on most Pitts Specials built for competitive aerobatics. 35 wide x 21 high. Center opening 9-1/4 dia. P/N 05-01184 ........ $114.95
These Dzus over the center type latches are used extensively on cowl doors and other applications on aircraft such as Cessna, Piper, Grumman, and many homebuilts. Model I latch: This latch provides 700 lbs. Ultimate strength and 100 lbs. Working strength. Pull up ability is 0.6 inch. Mounting holes will accept .156 in. diameter rivets or #6 round head screws. Order strikes separately. Part No. 05-01187 05-01188 05-01189 Description Dimensions (closed) Cowl Latch Model I Latch Strike C8 Latch Strike C7 Price Ea. $2.90 $0.63 $0.56
MODEL #2
For installation on Tailwind or Cougar. Used with 4 prop extension. Shape rounds out the boxy appearance of the standard design. Size: 35w x 22.5h. Has been installed on Starduster I and various Lycoming powered homebuilts. Face of center opening 11-3/4 O.D. P/N 05-01185 ....... $124.95
These Dzus over the center type latches are used extensively on cowl doors and other applications on aircraft such as Cessna, Piper, Grumman, and many homebuilts. Model II latch: This latch provides 220 lbs. of ultimate strength and 45 lbs. of working strength. Pull up ability is .2 inch. Mounting holes will accept .156 in. diameter rivets or #6 round head screws. Order strikes separately. Part No. 05-01190 05-04183 05-04184 Description Dimensions (closed) Cowl Latch Model II Latch Strike C9 Latch Strike C2 Price Ea. $2.95 $0.79 $0.54
These pins of stainless steel, are made to exacting standards. Pushing the button on top, it contracts and releases two (or four) balls at the end of the shank. These balls lock onto and release from the part for fast removal. The following types and sizes are most commonly used for hang gliders and not for structural aircraft. Request quote on special sizes (25 piece minimum). Less 10% for 12, Less 15% for 25, Less 20% for 50. May be assorted. Alternate MS Part No. Head Shank Leng. Price Part No. Type Dia. LG4C-T-0.343 --TEE 1/4" 0.343" $17.75 LG4C-T-1.40 MS17985-414 TEE 1/4" 1.400" $14.50 LG4C-T-2.10 MS17985-421 TEE 1/4" 2.080" $21.50
The Hartwell H-5000-2 is a unique spring-loaded, trigger action latch for cowling and access doors. Made of corrosion resistant steel. Rivet or spot weld to structure. Bolt Offset: .132. Trigger Offset: .102. Max. Depth: 1.23 P/N 05-01881 ........$158.95
FLUSH LATCH
192
FIBERGLASS COMPONENTS
From the latest design of John Thorp, this is a 2 piece cowl used on the T-18. Can be adapted to most homebuilts where the builder wishes to use cheeks. They have been installed on the Midget Mustang as well as the Miniplane. Makes a fine nose section. P/N 05-01213 ................. $69.75 Manufactured from the original T-18 plans and come ready to slip over the ends of the wing. Nav. Iights are normally installed by notching the leading edge corner of these fairings and installing Plexiglass. P/N 05-01214 ............... $175.95
For Starduster or Skybolt. Flat Gray finish, 18 wide. Can be upholstered or used plain. Contoured bottom for parachute. These are not chopped glass seats. Hand layed up for extreme lightness. Wt. 3 lbs. 10 oz. Note: This oversized item ships in a 21 x 21 x 21 box with a dimensional weight of 48 lbs. (56 lbs internationally) P/N 05-22600 .................................... $73.25
BUCKET SEATS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Fits the Acroduster or Skybolt. With flat mounting pad to accommodate a VHF antenna. Approx. Height 19 at front, 13 at back. Overall length, approximately 57. P/N 05-22200 ................. $124.95 These wing tips are constructed of hand laid-up fiberglass which is extremely strong, has great impact strength, and is resistant to chemicals. The Hoerner design of these wing tips reduce the vortex that emanates from the trailing edge of the wing tip thereby reducing drag on the aircraft, leaving more energy available for lift and speed. Stall speed is decreased and lateral stability is improved. You will see increased cruise speed, more positive aileron control, increased rate of climb, decreased take-off distance, and improved appearance with these tips. All STC and approval data is furnished. Cherokee Straight Wing Tips PA-28 140 thru 200R models. P/N 05-90000 .............. $783.00 pr. Cherokee Taper Wing Tips PA-28 151 thru 236 models P/N 05-91000 .............. $572.00 pr.
TURTLE DECK
Carburetor intake scoop with 4-1/4 x 8 rectangular opening. P/N 05-22500 ..........$49.85
Originally designed for the Smith Miniplane but can be used on other bipes. P/N 05-22100 ..........$31.75
HEAD REST
Fiberglass Cowl set fits Baby Great Lakes, Super Baby Great Lakes, and Buddy Great Lakes. Top and Bottom Cowl halves sold separately. Dimensions: 33x29x9-1/2 (PN 05-02883) 33x33x19 (PN 05-02884)
Top Nose Cowl P/N 05-02883...................$223.95 Bottom Nose Cowl P/N 05-02884...................$250.00
Cessna Wing Tips 140A, 150, 170B, 172, 175, 180, 182,185,210 (pre 1974 models only) P/N 05-94000 .............. $617.00 pr.
This fiberglass seat was designed to fit the Baby Great Lakes aircraft and is recommended by the designer. Dimension: 26x30x19 P/N 05-02885 ..............$250.00
Comanche Wing Tips All singles and PA-30 twins. P/N 05-92000 .............. $625.00 pr. Cherokee Stabilator Tips PA-28 taper and straight wings P/N 05-93000 .............. $388.95 pr. Bonanza Wing Tips 35 series thru P models P/N 05-95000 .............. $821.00 pr.
Keep gravel, mud, dew and grass out of your prop, off your wings and off your face with these easy-to repair fiberglass reinforced polyester wheel pants. Supplied in gel-coated finish, they have a small seam along the top edge, easily removed by sanding, if desired. Sorry, no mounting hardware is included. Easy to cut and customize. White, red
Wheel Pant Dimensions Size Width Height Length Opening Weight 4 5 9 22 4.4X12 1 5 7 9 23 5.5X13.75 1.3 6 8 9 28 8X15.75 11.5
Description Straight Wheel Pant 4 White Straight Wheel Pant 4 Black Primer Straight Wheel Pant 5 White Straight Wheel Pant 5 Black Primer Straight Wheel Pant 6 White Straight Wheel Pant 6 Black Primer Aero Wheel Pant 5 White
Other Products: DESCRIPTION PART NO. PRICE Aztec & Apache Wing Tips (PA-23 all models) 05-96000 $2,875.00 Apache Dorsal Fin (PA-23 150&160) 05-97000 $795.00 Beech Wing Tips 05-00769 $623.00 Call for Piper Tailcone (PA-28 & PA-32) 05-98000 Price Call for Piper Dorsal Fin (PA-28 & PA-32) 05-99000 Price Cherokee Taper Wing Tips C/W Replacement 05-02599 $573.00 Cherokee Dorsal Fin Fwd. 05-02601 $186.95 Cherokee Dorsal Fin Aft. 05-02602 $212.95 Cherokee Tail Cone Upper 05-02603 $214.95 Cherokee Tail Cone Lower 05-02604 $232.95 Cessna Wing Tips 05-02605 $514.00 Aztec/Apache Tip Tanks Hoerner Style 05-02606 $9,460.00 Apache Windshied 05-02607 $1,469.95 Seneca Wing Tips 05-02608 $703.00 Seneca Stabilator Tips 05-02609 $394.95
193
WHEEL FAIRINGS
All wheel fairings furnished with reinforcing bulkheads for added stability and cleanliness.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
5:00 X 5 fairing that is small and compact. The same shape and size as the early model Cessna 150 & measures 26 long by 7 wide. Has been used on the CA-61, Tailwind, T-18, Baby Ace, Cougar, or any homebuilt that requires this size. P/N 05-01215 .......... $198.50 Pair MF-2 - 5:00 X 5 teardrop style as used on the later model Cessna 150. Measuring 36 by 7, it has been installed on Tailwinds, Smyth Sidewinder, Cougar or any wheel this size. Overall size: 35L x 7-1/2W Opening Size:7.5W x 151/2L P/N 05-01216 .......... $204.95 Pair MF-3 - 5:00 X 5 with the long, narrow profile. A standard on Pitts Specials, Acro Sport, T-l 8, Cassutt & Midget Mustang. Truly a universal shape. Overall size: 39l x 7.5w Opening Size:4-3/4W x 101/2L P/N 05-01217 ........... $198.50 Pair MF-4 - 5:00 X 5 Thorp T-18 fairing. This style was one of our original developments specifically for the T-18 and has proven to be very popular. Like all other listed pants, it will fit any wheel this size. Overall size: 31.5L x 7-1/2w Opening Size:14.75wx 7L P/N 05-01218 ........... $198.50 Pair MF-5 - 6:00 X 6 wheel fairing in the same shape as the J-3 Cub but, scaled down to fit this size wheel. Popular on the bi-planes, Spezio and the parasols. Gives a very classic look to your airplane. Overall size: 30L x 9-1/2W Opening Size: 7-1/2W x 18-1/2L P/N 05-01219 ........... $198.50 Pair MF-6 - 6:00 X 6 fairing styled after the late model Cessna 172 and is used on just about any designed aircraft. Measure 42 by 8 and are very pretty. Overall size: 44L x 8-1/4W. Opening Size: 8-1/4W x 23-1/4L P/N 05-01220 .......... $198.95 Pair
MF-1A -
MF-7 - 6:00 X 6. Same size and shape as the Piper Cherokee fairings. A standard on the Stardusters, Skybolt and used on m any other designs. Overall size: 37L x 8W Opening Size: 13-1/2W x 7L P/N 05-01221 ....... $198.50 Pair MF-8 - 5:00 X 5 pant. Almost the same dimension as the MF-3 however, has more of a point on the tip. Also popular on the Pitts, Cassutt, T-18 and Midget Mustang. Overall size: 37-1/2L x 8W Opening Size: 14-3/4W x 6L P/N 05-01222 ........ $198.50 Pair MF-9 - J-3 Cub design for any biplane or parasol using the larger size wheels. Overall size: 29L x101/2W Opening Size:8-1/4Wx10L P/N 05-01223 ....... $198.50 Pair
MF-10 - 7:00 X 6. For aircraft using the larger wheels and also for the Stinson or Funk. Much lighter than the factory originals. Overall size: 31L x 11W Opening Size: 19L x 10W P/N 05-01224 ....... $198.50 Pair MF-11 - 6:00 X 6 wheel fairings. Same size and shape as used on the Tripacer, Pacer or Colt. More streamlined design than the MF-9. A nice installation on the Super Cub w/ 8.00 x 4 wheels. Overall size: 43L x 9-1/2w Opening Size: 9.5w x 18.5L P/N 05-01225 ....... $198.50 Pair MF-12 - 5:00 X 5 RACING FAIRINGS. Fits the V-Witt, Cassutt, Owl or any Formula One, Formula V or Bi-plane using this size wheel. Race proven. Overall size: 40L x 7-1/2W Opening Size: 4.5W x10-3/4L P/N 05-01226....... $198.50 Pair
Stop tow-bar wheel pant scuffing. & Avoid costly wheel pant repainting. Available in standard black, navy or burgundy. Fits models: Cessna 172 | 182 | 206 Cherokee Made from heavy-duty vinyl Padded backing Attaches quickly using Velcro(tm) Stores easily Personalization available Cover Navy...................................P/N 05-03048 ......................... $69.95 Cover Black ..................................P/N 05-03049 ......................... $69.95 Cover Burgundy ...........................P/N 05-03050 ......................... $69.95
FAA approved Laminar Flow Speed Pants will add up to 10.5 mph over bare wheels and up to 8 mph over stock wheel pants for all Piper PA-28 and PA-32 aircraft models. A special pressure recovery design improves rate of climb with most installations. At 10 pounds, these second generation Speed Pants are lighter and up to 5 times stronger than conventional Piper wheel pants. They are made of three layers of hand-laid, 10 ounce fiberglass which is oven cured with a high strength resin. Additional layers of cloth are applied to stress areas. A removable panel allows easy access to brakes. Wing to wheel fairing improve the aesthetics of the main gear. P/N 05-03627 .................... $2,995.00
194
CESSNA PARTS
(FAA/PMA APPROVED) CESSNA COWL FLAP C-170 TAILWHEEL SPRINGS RIGHT AND LEFT
These cowl flaps feature a replaceable stainless steel hinge that may be removed and replaced using screws. The specific model applicability for these cowl flaps are the C-180C, D, E, F, G, H, J and 180K; the 182B, C and D; 185, 185A, B,C,D, 185E, A185E and A185F. FAA Approved. Left................................................... P/N 05-03393................. $1,019.00 Right ................................................ P/N 05-03394................. $1,087.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Tailwheel Spring Assembly ......................P/N 06-15000 ............$199.75 Main Leaf Only .........................................P/N 06-15100 ..............$88.65
Cessna Adjusting Cam. - U0712502; Trim screw adjusting cam. FAA/PMA Approved. P/N 05-07010...................... $33.50
Early 120-140 (single bend, originally on SN 8001-14026) P/N 05-07055 .........$138.95 120-140 (SN 14027 and up) P/N 06-14800 .........$189.75 120-140 main leaf only (SN 8001-14026) P/N 05-07065 ...........$56.50 120-140 main leaf only (SN 14072 & up) P/N 06-14900 ...........$61.50
RUDDER BELLCRANK
FOR C-120, 140 & 170
P/N 05-07075 .........$292.95
Front Rod End .... P/N 05-07020...................... $88.75 Rear Rod End..... P/N 05-07025...................... $68.50
SK152-24A CESSNA RUDDER STOP FOR SHEET METAL BULKHEAD ALL METAL COWLING PARTS
FOR 120-140
Applicable on the following models: (172, 172A, B, C, D, E, F, G, H, I, J, K, L, M, N, P, Q) P/N 05-07030 ........ $229.00
1946 Cowling Items Lower Cowl Skin, Left P/N 05-07165 .........$897.00 Lower Cowl Skin, Right P/N 05-07170 .........$994.00 Nose Cowl Only P/N 05-07175 .........$716.00 FAA/PMA Approved. Also approved for 170, 170A, and 170B thru SN 25372. Cessna 140/170 left hand grill (U0452207) P/N 05-07180 .........$189.50 Cessna 40/170 right hand grill (U0452207-1) . P/N 05-07185 .....$189.50
Applicable on the following models: For 180180G, 182182G & 185185C P/N 05-07035........... $311.95 For all C-150, 152, 170A, 170B, 172, 180, 182 & 185 .....P/N 05-07040 .......... $59.25 This easy-to-install tail skid is designed to save the tail feathers on most single engine Cessnas. Made from 4130 aircraft steel, this tail skid fits Cessna 150, 152, 172, 177, and 182. P/N 13-17010 ....................$14.75
120-140 ............................ P/N 05-07190 ..............$788.00 140A ................................ P/N 05-07195 ...........$1,158.00
The problem * The exhaust pipe creates parasitic drag within the slip stream * Nonlaminar flow conditions occur at the opening of the cowl * Aircraft esthetics are affected by the protrusion of the pipe. The exhaust cuff solution eliminates non-laminar airflow about the exhaust port * Reduces cylinder head temperatures * Cruise performance increased * Enhances the esthetics of the aircraft Cessna Ehaust Cuff 206 & 210 ..........P/N 05-04474 ..................$195.00 Cessna Ehaust Cuff 340....................P/N 05-04475 ..................$395.00
McFarlane Aviation Products has developed a new tool to determine Flap track wear. McFarlane developed this tool to positively indicate when the flap track is worn beyond service limits. Flap Track Wear Gage Use to determine if a Cessna flap track is worn beyond service limits. Flap Track Wear Gage Instructions: Run the gage plug along each slot in each flap track while verifying that the gage will not enter the slot. Reposition the flaps as required to gage the entire length of each slot. If the gage enters a slot at any point the track is worn beyond service limits. The diameter of the gage is .6035 inches (diameter tolerance +.000/-.002)Periodically verify the gage diameter by measuring the age diameter with a calibrated micrometer. P/N 05-02145............$41.50
CW-172001 replacement for Cessna part #0700325-2 adapter assembly. Eligible for installation on Cessna 172, 172A, 172B, 172C, 172E, 172F, 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P, 172Q. P/N 05-04645............$89.50
195
CESSNA PARTS
CM WP ME
COMPONENT PARTS
HA AP LG EP CS IN EL AV TO PS BV
Arm (for -2 assy.)(U0413362-8) ...............P/N 05-07110 ............. $37.85 Arm (for -3 assy.)(U0413362-9) ...............P/N 05-07115 ............. $33.25 Bracket (U0413362-13) ............................P/N 05-07120 ............. $61.25 Knob (U0413359) .....................................P/N 05-07125 ............. $18.75 Extension Arm (U0413362-12) .................P/N 05-07130 ............. $58.25 Angle (left side)(U0413362-10) ................P/N 05-07135 ............... $7.25 Angle (right side)(U0413362-11) ..............P/N 05-07140 ............... $6.90 Pin (U0413362-14) ...................................P/N 05-07145 ............. $16.50 Pin (U0413362-16) ...................................P/N 05-07150 ............. $16.50 Pin (U0413362-15) ...................................P/N 05-07155 ............. $16.50 Spacer (U0413362-7) ...............................P/N 05-07160 ............... $7.25 Washer (2 reqd) .....................................P/N AN960-10 .............. $0.02 Washer (2 reqd).......................................P/N AN960-10L ............ $0.02 Screw........................................................P/N THA4-6 .................. $0.15
NOTE:Cessna 172 Spinner Dome PN 05-09045 will not work for 1960 Cessna 172A. Cessna spinner dome for - F, G, H, J, 150 K P/N 05-09030 ..$314.00 Cessna front plate for - 150 F, G, H, J, 150 K P/N 05-09035 ....$74.85 Cessna rear plate for - 150 F, G, H, J, 150 K P/N 05-09040 ..$284.00 Cessna spinner backplate for - early Cessna 170 & 172 for Contential 8 hole flanges .....................................................P/N 05-07265 ..$299.75 Cessna spinner dome for- early Cessna 170 & 172 for Contential 8 hole flanges ................................................................P/N 05-07270 ..$661.00 Cessna spinner kit - early Cessna 170 & 172 for Contential 8 hole flanges ................................................................P/N 05-07275 ..$951.00 Cessna dome for - 172 A-F................................P/N 05-09045 ..$522.00 Cessna front plate for - 172 A-F .......................P/N 05-09050 .. $432.95 Cessna rear plate for - 172 A-F .........................P/N 05-09055 .. $318.95 Cessna dome for - 172 I, K, L, M, N, & P ..........P/N 05-07280 .. $378.95 Cessna front plate for - 172 I, K, L, M, N, & P ...P/N 05-07285 ....$87.50 Cessna rear plate for - 172 I, K, L, M, N, & P ....P/N 05-07290 ..$259.00
CESSNA SPINNERS
Cabin Entry Step for Cessna Aircraft. Applicable to: 170, 170A, B - 18000 thru 27169 180,180A, B, C, D, E, F - 30000 thru 18051312 185, 185A, B, C, D, E, A185E* - 1850001 thru 1851300 * Partial model eligibility aLeft Cabin Access.............................. P/N 05-04176 .................$360.95 Right Cabin Access ............................. P/N 05-04177 .................$360.95
These aluminum spinners and spinner support spacers are FAA approved for installation on several models of Cessna 182 series aircraft using McCauley two blade constant speed propellers. The Spinner Dome replaces original Cessna p/n 0752637K200, 0752637-5 and 0752637-11. The Spinner Spacer replaces original Cessna p/n 0752620-1 and 0752620-3. The Spinner Dome is approved on the Cessna 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q and the 182R. The Spinner Support Spacer is approved on Cessna Models 180H, 180J, 180K, A185E, A185F, 182E, 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R, 210-5 (205), 210-5A (205A), 206, U206, P206 and the U206A. Spinner Dome U0752637K200 . . . . . . . 05-01901 ...... $673.00 Spinner Sport Spacer U0752620-3. . . . 05-01902 .......... $5.95
We carry FAA-PMA approved replacement trim control chains for Cessna 120 through 210 series aircraft. Call the Cessna/ Piper parts specialist at Aircraft Spruce (1-877-4-SPRUCE) for assistance in determining the correct chain for your aircraft. Part No. 05-00289 05-00291 05-00292 05-00293 05-00294 05-00295 05-00296 05-00297 05-00298 05-00299 05-00301 05-00302 05-00303 05-00304 05-00305 05-00306 05-00307 05-00308 05-00309 05-00311 05-00312 05-00313 05-00314 05-00315 05-00316 Price Ea. $6.25 $91.25 $145.95 $135.95 $43.25 $46.25 $45.00 $62.25 $69.25 $68.75 $79.00 $74.25 $83.25 $134.95 $122.95 $115.95 $139.95 $43.75 $67.00 $50.75 $67.00 $111.95 $72.75 $52.75 $159.85
DETAIL PARTS
3) Recess .................................. P/N 4) Lever ..................................... P/N 5) Clip ........................................ P/N 6) Pin ......................................... P/N 7) Housing ................................. P/N 8) Hook ...................................... P/N 9) Spring .................................... P/N 10) Pin ....................................... P/N 11) Shim .................................... P/N 12) Recess ................................ P/N 13) Hook .................................... P/N 05-07210 ...........................$31.50 05-07215 ...........................$29.25 05-07220 ...........................$22.50 05-07225 ...........................$14.00 05-07230 ...........................$25.50 05-07235 ...........................$29.50 05-07240 ...........................$18.00 05-07245 ...........................$13.85 05-07250 .............................$1.72 05-07255 ...........................$48.25 05-07260 ...........................$46.75
These FAA-PMA approved mounting plates are annodized for improved corrosion resoistance and will save over $100 compared to factory mounting plates. Approved with artial eligibility for the Cessna 150, 152, and 172. Verify approval for your aircraft with Aircraft Spruce prior to ordering. Cessna P/N Our P/N Price Each 0441225-1 (Left)............05-01497 .........$107.95 0441225-2 (Right) .........05-01498 .........$133.95 0441220-1 (Left)............05-01499 ..........$73.25 0441220-2 (Right) .........05-01501 ..........$57.75
196
CESSNA PARTS
Aircraft Spruce and Specialty stocks a large inventory of Cessna replacement parts. Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cessna part numbers and we will provide you with a prompt quotation. All of the parts listed here are authentic Cessna factory parts and all carry our low price guarantee. Please verify that the parts are correct for your Cessna model/ year by referring to the applicable Cessna parts manual prior to ordering. Call for Prices on Unlisted Cessna Parts
Part. No. S1258-1 SK172-1F S1093-1 NAS75-3-009 NAS77-3-23 NAS77-8-88 MS25171-1 MS25171-2 C156003-0101 C592001-0201 11-10574 B100142-1 S1991A1 S2020-2 S2106-2 S2160-1 S2237-3 S2416-1-31.0 0400213-6 0413613-1-279 0511242-1 1220114-1 1243030-5 1243030-6 1243030-7 1250860-29197 1298119-4 1414104-54 1513174-3 1513174-5 1555014-2 0523919 0523920 0523921 0541139 9910306-1 0711001-59 Price $13.50 $25.85 $0.19 $5.25 $3.95 $6.60 $1.16 $1.18 $52.85 $36.90 Static Wick Non Certified $12.95 Fuel Cap Gasket $12.75 Contactor $51.75 Drain Valve $22.60 Drain Valve $26.50 Switch $6.75 Seat Belt Bushing $1.72 Alt Belt $32.80 Compass Placards $1.44 Panel Nut $1.76 Seat Stop $76.50 Spacer $0.64 Shim $13.85 Shim $10.95 Shim $8.85 Clamp $110.95 Exhaust Spring $5.40 Bushing $17.75 Grey Panel Nut $6.90 Black Panel Nut $7.70 Clamp Half $10.75 Bushing $8.95 Roller $59.90 Roller $42.50 Plug $28.85 Westgate Gasket $32.75 Hinge Pin $17.25 Description Sump Strut Kit Flap Buttons Bushing Bushing Bushing Nipple Nipple Fuel Cap Static Wick Certified Part. No. 0713348-1 S2488-1 0756009-8 0851559-1 0756010-6 0756011-1 S1450-6B14-010 S1597-1-37.5 B3-5-1 S1921-1 U10C062-262M B40012 A2748 A2749 MS25253-1 1234665-10 S1906-1 S1906-2 S1230-17 S1230-19 RD0015H1600JBL 0441139-6 0541111-2 0441157-2 0441157-1 1250405-1 MS29513-338 AN6235-2A AN6235-3A 1250922-200 1250922-201 1250922-202 0750142-1 0756009-1 0741623-4 0441157-3 0556010-200 Description Stall Horn Stall Horn Reed Gasket Washer Plunger Standpipe Washer Belt V Filter Vac Clamp Clamp Brush Seal Seal Wiper Switch Tab Switch Switch Control Control Rheostat Shim Shim Shim Shim Nut O-Ring Filter Hyd Element Adapter Adapter Adapter Gasket Fuel Filter Tread Shim Adapter Assy. Price $23.65 $0.85 $26.85 $6.25 $139.95 $205.95 $3.60 $69.75 $2.95 $108.95 $51.00 $173.65 --$15.75 $11.75 $2,332.00 $21.50 $13.75 $56.75 $58.65 $1,889.00 $52.25 $156.95 $658.00 $110.95 $304.95 $1.45 $7.85 $14.50 $559.00 $629.00 --$32.25 $39.75 $17.25 $105.95 $963.00 Part. No. 1232040-5 79C1 S2485-1 S1577A1 S1579A2 S1580A1 S1588-1 S1588-2 0750143-2 0750143-3 0851559-2 S1915-1 S1915-2 S1994-1-1 S2334-3 S1258-1 S3010-1 S1104-3 S1105-4 C592001-0201 C592001-0203 S1704-1 1714000-22 16165 KM610-64 B3-11-1 S1477-3 S1477-08 NH1000897-30 NH1000897-40 NH1000897-50 NH1000897-60 DGR3 DGR6 SK152-25A Description Boot Drain Valve Drain Valve Contactor Contactor Contactor Gasket Gasket Deflector Bracket Washer Capacitor Capacitor Switch CHT Probe Sump Switch Rod End Rod End Wick Wick Roller Washer Wick Latch Gasket Nut Nut Clip Clamp Clamp Clamp Coupling ACU Regulator Rudder Stop Price $68.85 $135.95 $87.25 $88.75 $56.90 $81.75 $37.25 $29.90 $20.85 $10.60 $6.85 $106.95 $72.50 $29.70 $271.95 $13.50 $40.75 $24.50 $16.50 $36.90 $67.75 $2.80 $3.30 $49.50 $59.00 $31.75 $1.51 $2.25 $221.00 $433.95 $284.95 $313.95 $319.95 $169.95 $90.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Skybolt SK2003 is the FAA TSO-C148 approved direct replacement for the common CESSNA /LORD J7444 firewall platemounts. SK2003 -14 Southco Fasteners SK2003-24 Camloc or CLoc 2000 Series Fasteners SK2003-36 Camloc or CLoc 4000 Series Fasteners The newly improved SK2003 offers greater flex for cowlings with cumbersome alignment issues. Combined with the SK2003-AW alignment washer, the SK2003 can be easily positioned to align with the existing cowling holes. This allows the cowling fasteners to lock properly and effortlessly, removing the stress that is a common problem in original part failures. Fateners not included. Orig. Mfg. Part No. J7444-14 J7444-24 J7444-36or-42 New Part No. SK2003-14 SK2003-24 SK2003-14 Aircraft 67-On C150, 67-86 C172, 71-78 C177 73-86 C182 96-On C172 15% discount on 10 or more Part No. 08-00663 08-00664 08-00665 Price $21.75 $21.95 $22.75
Now easier than ever to install. No drilling of airframe required. All kits utilize new SK2003 cushioned shock mounts complete instructions with photographs. All paperwork included for logbook entry.
Aircraft C150 (67-On) C172 (6781) C172 (8286) C177 (All) C182 (7386) Kit SK203C150P4 SK203C172P4 SK203C172PQ4 SK203C177P4 SK203C182P4 Firewall Firewall Firewall Firewall Firewall to to to to to SK40S5 SK40S5 SK40S5 SK40S5 SK40S5 Stainless Stainless Stainless Stainless Stainless / / / / / Convert all fasteners to: Sides to SK26S51 Stainless Sides to SK40S5 Stainless Sides to SK40S5 Stainless Sides to SK40S5 Stainless Sides-replace 40S5 with SK40S5 Stainless Part No. 08-00666 08-00667 08-00671 08-00668 08-00669 Price $470.95 $598.00 $654.00 $634.00 $593.00
Partial Kit list Call for early screw cowling conversion kit and non-listed aircraft. Special tooling required #4P3/T26 tool set Note: In addition to normal hand tools, Unibit 1 and Unibit 3 stepdrills required. Intercylinder Baffles for Teledyne Six Cylinder Engines. Replaces Cessna Part Number 0750135-1 and 0851833-1 P/N 05-02362 ............ $69.25
INTER-CYLINDER BAFFLE
Improved fit and appearance. Form fitting, Trailing Edge Bulb for Cessna Flaps. (Cut on bevel to avoid crimping Flap Trailing Edge.) STC/PMA Approved. For application please call or visit our website. 79.5 length ................... P/N 05-00046 ....... $56.75
FAA-PMA approved for use as a minor alteration part on the following aircraft: Cessna Raytheon Maule Cessna/Reims Mooney Univair (Stinson) Piper Call for Specific Models - Easily field approved for other applications - Trim to exact length ....................... P/N 05-01254 ....................$149.95 Fittings and components are made from anodized aluminum, stainless steel, and brass. All critical swage connections are metal to metal for continued dependability. Vernier locking devices are precision formed and heat treated in critical wear areas. ................................... P/N 05-02209........... $337.50
THROTTLE CONTROL
The retaining nut threads onto the threaded section of the control on the back side of the instrument panel to secure the control. Replacement retaining nut p/n 6260 for all McFarlane MC6350 dual push-to-unlock controls. P/N 05-04581 ...................................................... $6.34
197
CESSNA CONTROLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model 120 140 140A 150 150A,B,C, D,E,F F150F 150G F150G 150H,I,J, K,L,M A150K,L,M
Throttle, Propeller, Mixture, controls are available for most Cessna single engine aircraft from the Cessna 120 through the 210 series. These FAA-PMA controls are ultra-smooth, flexible with no stretch, arctic tested to -50F, and tested to 250,000 cycles. They feature brass body assembly, teflon lined conduit, stainless steel ends, viton dust boots, aluminum friction lock, and a high quality phenolic knob (throttle, mixture, and prop).
Throttle Controls Serial No. Model No. 8000 thru 11846 MC0411091-7 11847 thru 15075 MC0411091-7 15200 thru 15724 MC0411091-7 17001 thru 59018 MC0411091-7 15059019 thru 15064532 F1500001 thru F1500067 15064533 thru 15067198 F1500068 thru F1500219 15067199 thru 15079405 A1500001 thru A1500734 MCS1222-11S MCS1222-11S MCS1222-14S MCS1222-14S MCC2995050202S MCC2995050202S MCC2995050202S MCC299505-0202 MC9863053-20 MC9863053-20 MC9863053-20 MC9863053-20 MC9863056-1 MC9863056-1 MC9863056-1 MC9863056-1 MC0411091-2 MCS1222-2S MCS1222-2S MCS1222-2S MCS1222-15S MCS1222-15S MCC299505-0102 MCC299505-0102 MC9863053-15 MC9863053-15 MC9863056-3 MC9863056-3 MC565-549-021 MC565-549-021 MC0411091-27 MCS1222-19 MCC299505-030 MCS1222-1S MCS1222-13S MCC2995050201S Part No. 05-00272 05-00272 05-00272 05-00272 05-00197 05-00197 05-00199 05-00199 05-00262 05-00262 05-00262 05-00262 05-00248 05-00248 05-00248 05-00248 05-00251 05-00251 05-00251 05-00251 05-00269 05-00206 05-00206 05-00206 05-00201 05-00201 05-00259 05-00259 05-00246 05-00246 05-00253 05-00253 05-00988 05-00988 05-00271 05-00203 05-00264 05-00204 05-00198 05-00261 Price $289.95 $289.95 $289.95 $289.95 $203.95 $203.95 $223.95 $223.95 $198.50 $198.50 $198.50 $198.50 $393.95 $393.95 $393.95 $393.95 $189.75 $189.75 $189.75 $189.75 $361.95 $223.50 $223.50 $223.50 $202.95 $202.95 $227.95 $227.95 $382.95 $382.95 $339.95 $339.95 $374.95 $374.95 $307.95 $449.95 $234.95 $179.85 $169.95 $245.95 Throttle Controls Serial No. Model No. 18052771 thru 18053000 MC9863053-5 33000 thru 18253598 MCS1222-1S 18253599 thru 18255844 MCS1222-6S thru 18258505 MCS1222-13S MCC299505182L,M,N,P* 18258506 thru 18261425 0201S 182P* 18261426 thru 18264835 MCC299505-0205 182P*,Q* 18264836 thru 18266590 MC9863053-5 F182P*,Q F18200001 thru F18200094 MC9863053-5 182S 18280001 thru 18280944 MC565-549-031 182T 18280945 and On MC565-549-031 T182T T18208001 and On MC565-549-031 T182 18267716 thru 18268615 MC9863056-7 R182* R18200001 thru R18200583 MC9863053-11 FR18200001 thru FR182* MC9863053-11 FR18200020 R182* R18200584 thru R18202041 MC9863056-6 FR18200021 thru FR182* MC9863056-6 FR18200070 TR182 R18200584 thru R18202041 MC9863056-7 A185E* 185-1301 thru 185-1599 MCC299505-0301 A185E* 18501600 thru 18502007 MCC299505-0301 A185E* 18502026 and 18502027 MCC299505-0301 A185E*,F* 18502008 thru 18502025 MCC299505-0501 A185E*,F* 18502028 thru 18503153 MCC299505-0501 188A, A188B* 18800833 thru 18802745 MCS2149-1 A188B* 18802746 thru 18803856 MCC299508-0301 205,205A 205-0001 thru 205-0577 MCS1219-1 206 206-0001 thru 206-0275 MCS1219-1 P206C,D,E P206-0420 thru P20600647 MCC299505-0101 U206C,D,E,F U206-0915 thru U20603521 MCC299505-0101 U206G*/ U20603522 thru U20604649 MC9863053-13 TU206G* U206G*/ U20604650 thru U20606439 MC9863056-2 TU206G* 206H 20608001 and On MC565-549-041 T206H T20608001 and On MC565-549-041 207, T207 20700007 thru 20700362 MCS1222-25A 207A*/ T207A* 20700363 thru 20700482 MC9863053-16 207A*/ T207A* 20700483 thru 20700788 MC9863056-4 210B,C,D 21057841 thru 21058510 MCS1219-1 210H,J,K,L 21058937 thru 21061573 MCC299505-0101 T210H,J,K,L T210-0308 thru 21061573 MCC299505-0101 210M/ T210M 21061574 thru 21062954 MC9863053-13 210N*/ T210N* 21062955 thru 21064897 MC9863056-2 P210N* P21000001 thru P21000150 MC9863053-13 P210N* P21000151 thru P21000834 MC9863056-2 Model 180K* 182,A,B,C,D 182E,F,G 182H,J,K Part No. 05-00249 05-00204 05-04606 05-00198 05-00261 05-00263 --05-00989 05-00989 05-00989 05-00257 05-00244 05-00244 05-00256 05-00256 05-00257 05-00264 05-00264 05-00264 05-00265 05-00265 05-00226 05-00184 05-00193 05-00193 05-00258 05-00258 05-00245 05-00252 05-00990 05-00990 05-00205 05-00247 05-00254 05-00193 05-00258 05-00258 05-00245 05-00252 05-00245 05-00252 Price $346.95 $179.85 $231.95 $169.95 $245.95 $226.95 --$277.95 $277.95 $277.95 $386.00 $342.95 $342.95 $380.95 $380.95 $386.00 $234.95 $234.95 $234.95 $391.95 $391.95 $507.00 $264.95 $379.95 $379.95 $234.95 $234.95 $396.95 $327.95 $376.95 $376.95 $218.95 $337.95 $346.95 $379.95 $234.95 $234.95 $396.95 $327.95 $396.95 $327.95
F150H,J, K,L,M F1500220 thru F1501428 FA150K,L 152* A152* F152* FA152* 152* A152* F152* FA152* 170, 170A,B* 170B* 172, 172A, B,C,D F172D 172E,F,G,H F172E,F,G,H* 172I,K,L,M F172M* 172N* F172N* 172N*,P,Q F172N*,P 172R 172S 175* 177 177A,B* 180,A,B,C, D,E,F,G 180H* 180H*,J FA1500001 thru FA1500120 15279406 thru 15282031 A1520735 thru A1520808 F15201429 thru F15201528 FA1520337 thru FA1520347 15282032 thru 15286033 A1520809 thru A1521049 F15201529 thru F15201929 FA1520348 thru FA1520425 18000 thru 25372 25373 thru 27169 28000 thru 17250572 F1720001 thru F1720018 17250573 thru 17256512 F1720019 thru F1720559 17256513 thru 17267584 F17201035 thru F1720151 17267585 thru 17271034 F17201515 thru F17201749 17271035 thru 17276673 F17201750 thru F17202254 17280001 and On 172S8001 and On 55001 thru 55703 17700001 thru 17701164 17701165 thru 17702539 30000 thru 18051445 18051446 thru 18051875 18051876 thru 18052770
Accessories Cessna Rod End S1104-3 ................... P/N 06-00684 ..................$24.50 Cessna ControlS1230-17 ..................... P/N 06-00686 .................. $56.75
Model 177B* 177RG* F177RG* 180A,B,C,D,E,F,G 180H*, J 182,A,B,C,D 182E,F,G 182E,F,G 182H,J,K 182L,M,N,P FR182P 182Q,R A185E* A185E* A185E*,F A185E*,F A188B* A188B* T188C U206, U206A,B, TU206A,B P206, P206A,B U206C,D,E,F TU206C,D,E,F P206C,D,E U206G, TU206G 207A, T207A 210E,F,G T210F,G 210H,J,K,L T210H,J,K,L 210M,N,T210M,N P210N Propeller Controls Serial Number P/N 17701371 thru 17702539 C299506-0105 177RG0001 thru 177RG1051 C299506-0105 F177RG0001 thru F177RG0160 C299506-0105 30000 thru 18051445 S1223-4 18051876 thru 18052770 S1223-4 33000 thru 18253598 C299506-0103 33000 thru 18253598 S1223-4 18253599 thru 18255844 S1223-6S 18255845 thru 18258505 S1223-3 18258506 thru 18265175 S1223-6 F18200001 thru F18200025 C299506-0102 18265176 thru 18268615 C299506-0102 185-1301 thru 18502007 C299506-0103 18502026 and 18502027 C299506-0103 18502008 thru 18502025 C299506-0201 18502028 thru 18503153 C299506-0201 18800833 thru 18802745 S2149-2 18802746 thru 18803856 C299508-0302 T18803297T thru T18803422T C299508-0304 U206-0276 thru U206-0914 S1223-4 U206-0276 thru U206-0914 S1223-4 P2060001 thru P2060419 S1223-4 U2060915 thru U20603521 C299506-0101 U2060915 thru U20603521 C299506-0101 P206-0420 thru P20600647 C299506-0101 U20603522 thru U20607020 9862067-1 20700363 thru 20700788 9862067-12 21058511 thru 21058936 S1223-4 T2100001 thru T2100307 S1223-4 21058937 thru 21061573 C299506-0101 T2100308 thru T2100454 C299506-0101 21061574 thru 21064897 9862067-1 P21000001 thru P21000834 9862067-1 Our P/N 05-00177 05-00177 05-00177 05-00209 05-00209 05-00268 05-00209 05-00207 05-00208 05-00211 05-00267 05-00267 05-00268 05-00268 05-00178 05-00178 05-00228 05-00187 05-00191 05-00209 05-00209 05-00209 05-00266 05-00266 05-00266 05-00241 05-00242 05-00209 05-00209 05-00266 05-00266 05-00241 05-00241 Price $310.95 $310.95 $310.95 $245.95 $258.95 $245.95 $245.95 $217.95 $271.95 $240.95 $240.95 $497.50 $258.95 $258.95 $394.95 $394.95 $502.00 $309.95 $511.00 $245.95 $245.95 $245.95 $221.95 $221.95 $221.95 $389.95 $260.95 $245.95 $245.95 $221.95 $221.95 $389.95 $389.95 Mixture Controls Model Serial Number P/N R172E,F,G,H,J,K R1722000 thru R1723454 9862066-6 185A,B,C,D,E 185-0238 thru 185-1599 C299507-0201 A185E,F* 18501600 thru 18502007 C299507-0201 A185E,F* 18502026 and 18502027 C299507-0201 A185F* 18502008 thru 18502025 C299507-0401 A185F* 18502028 thru 18503153 C299507-0401 188,188A 1880001 thru 1880572 S1220-13 A188 18800573 thru 18800832 S1220-13 188B, A188B* 1880833 thru 18802745 C299507-0301 A188B* 18802746 thru 18803856 C299508-0401 T188C T18803297T thru T18803422T C299508-0402 205, 205A 205-0001 thru 205-0577 S1220-3 206 206-0001 thru 206-0275 S1220-3 U206, U206A,B U206-0276 thru U206-0914 S1220-3 P206, P206A,B P206-0001 thru P206-0419 S1220-3 U206C,D,E,F U206-0915 thru U20603521 C299507-0101 TU206C,D,E,F U206-0915 thru U20603521 C299507-0101 P206C,D,E P206-0420 thru P2060647 C299507-0101 U206G, TU206G U20603522 thru U20607020 9862066-1 207, T207 20700001 thru 20700362 S1220-12A 207A, T207A 20700363 thru 20700788 9862066-5 210B,C,D,E,F,G 21057841 thru 21058936 S1220-3 T210F,G T210-0001 thru T210-0307 S1220-3 210K,L, T210K,L 21059200 thru 21061573 C299507-0101 210M,N, T210M,N 21061574 thru 21064897 9862066-1 P210N P21000001 thru P21000834 9862066-1 182S 18280001 - 18280944 C565-548-042 182T 18280945 - On C565-548-042 Our P/N 05-00239 05-00181 05-00181 05-00181 05-00183 05-00183 05-00195 05-00195 05-00182 05-00189 05-00191 05-00196 05-00196 05-00196 05-00196 05-00179 05-00179 05-00179 05-00237 05-00194 05-00238 05-00196 05-00196 05-00179 05-00239 05-00239 05-00994 05-00994 Price $442.95 $268.95 $268.95 $268.95 $476.00 $476.00 $497.95 $497.95 $468.95 $522.00 $511.00 $419.95 $419.95 $419.95 $419.95 $215.95 $215.95 $215.95 $328.95 $522.00 $330.95 $419.95 $419.95 $215.95 $442.95 $442.95 $294.95 $294.95
FOR CARBURETOR HEAT CONTROLS FOR CESSNA 140-185, VISIT OUR WEBSITE AT WWW.AIRCRAFTSPRUCE.COM.
198
CESSNA CONTROLS
Cowl Flap controls are available for most Cessna single engine aircraft from the Cessna 120 through the 210 series. These FAA-PMA controls are ultra-smooth, flexible with no stretch, arctic tested to -50F, and tested to 250,000 cycles. They feature brass body assembly, teflon lined conduit, stainless steel ends, viton dust boots, aluminum friction lock, and a high quality phenolic knob (throttle, mixture, and prop). Our P/Ns are interchangeable with Cessnas P/Ns; "AS" prefix denotes Aircraft Spruce! Model Serial Number Location P/N Our P/N Price Location P/N Our P/N Price R172K R1722000 thru R1723454 1 per A/C S1391-26 05-00222 $118.95 ------------------------FR172K FR17200591 thru FR17200675 1 per A/C S1391-26 05-00222 $118.95 ------------------------177B 17701371 thru 17702752 Left S1391-25 05-00221 $171.95 Right S1391-26 05-00221 $171.95 177RG 177RG0001 thru 177RG1366 Left S1391-27 05-00223 $129.95 Right S1391-27 05-00223 $129.95 180D,E 18050912 thru 18051183 Left S1245-1 05-00217 $211.95 Right S1245-1 05-00217 $211.95 180F 18051184 thru 18051312 Left S1245-1 05-00217 $211.95 Right S1245-2 05-00218 $143.95 180G 18051313 thru 18051445 Left S1245-3 05-00219 $202.95 Right S1245-2 05-00218 $143.95 180H,J 18051446 thru 18052770 Left S1572-1 --------Right S1245-2 05-00218 $143.95 180K 18052771 thru 18053203 Left 9860074-3 05-00232 $268.95 Right 9860074-4 05-00233 $321.95 182D 18253008 thru 18253598 Left S1245-1 05-00217 $211.95 Right S1245-1 05-00217 $211.95 182E,F,G,H,J,K,L,M,N,P,Q,R 18253599 thru 18268615 Left 9860058-3 05-00229 $231.95 Right 9860058-4 05-00231 $214.95 T182 18267716 thru 18268541 Left 9860075-3 05-00234 $372.95 Right 9860075-4 05-00235 $361.95 R182/TR182 R18200002 thru R18202041 Left 9860075-3 05-00234 $372.95 Right 9860075-4 05-00235 $361.95 182S, 182T 18280001 and On Left 580-703-024 05-01736 $223.95 Right 580-703-025 05-01737 $221.95 T182T T18208001 and On Left 580-703-024 05-01736 $223.95 Right 580-703-025 05-01737 $221.95 185, 185A,B,C 185-0001 thru 185-0776 Left S1245-3 05-00219 $202.95 Right S1245-2 05-00218 $143.95 185D,E, A185E,A185F* 185-0777 thru 18503153 Left S1572-1 --------Right S1245-2 05-00218 $143.95 A185F* 185603154 thru 18504448 Left 9860074-3 05-00232 $268.95 Right 9860074-4 05-00233 $321.95 205, 205A 205-0001 thru 205-0577 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 206, U206 206-0001 thru 206-0275 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 U206A,B,C,D,E,F* U206-0276 thru U20602199 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 P206, P206A,B,C,D,E P206-0001 thru P20600647 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 TP206A* P206-0161 thru P206-0274 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 TU206A* U206-0438 thru U206-0617 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 TP206A*,B,C,D,E P206-0275 thru P20600647 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 TU206A*,B,C,D,E,F,G U206-0618 thru U20607020 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 U206F*,G U20602200 thru U20607020 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 206H 20608001 and On Left 580-703-026 05-01738 $311.95 Right 580-703-027 05-01739 $424.95 T206H T20608001 and On Left 580-703-026 05-01738 $311.95 Right 580-703-027 05-01739 $424.95 207, 207A,T207,T207A 20700001 thru 20700788 Left S1244-29 05-00212 $168.95 Right S1244-30 05-00213 $131.95 210, 210A 57001 thru 21057840 Left 1213040-1 05-00224 $132.95 Right 1213040-2 05-00225 $376.95 210B,C,D,E,F,G,H,J,K* 21057841 thru 21059240 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 T210F T210-0001 thru T210-0197 Left S1244-5 05-00216 $191.95 Right S1244-31 05-00214 $99.85 210K*,L,M,N 21059241 thru 21064897 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 T210G,H,J,K,L,M,N T210-0198 thru 21064897 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 P210N* P21000001 thru P21000834 Left S1244-32 05-00215 $125.95 Right S1244-31 05-00214 $99.85 *Denotes partial model eligibility
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Universal Push to Unlock Controls MC6150/ MC6250 - Perfect for home built or custom projects! Quality stainless steel construction Teflon lined for smooth operation Heavy duty strength and long life 3" maximum travel and 15lb. locking forcem Anodized aluminum knobs in red, black, blue or clear Custom laser marking available. MC6150 Series: - Solid wire end Available in 4, 6, 8, 10 and 12 foot lengths Maybe cut to length. MC6250 Series: - 1032 threaded end Available in 4, 6, 8, 10 and 12 foot lengths
MC6150 Controls (Solid Wire End) Description Part No. Price Black Knob, 4Ft. 05-04151 $72.65 Black Knob, 6Ft. 05-04152 $75.75 Black Knob, 8Ft. 05-04153 $78.25 Black Knob, 10Ft. 05-04154 $81.00 Black Knob, 12Ft. 05-04155 $83.50 Clear Knob, 4Ft. 05-04490 $72.65 Clear Knob, 6Ft. 05-04491 $84.50 Clear Knob, 8Ft. 05-04492 $87.50 Clear Knob, 10Ft. 05-04493 $90.25 Clear Knob, 12Ft. 05-04494 $93.25 Blue Knob, 4Ft. 05-04495 $72.65 Blue Knob, 6Ft. 05-04496 $75.75 Blue Knob, 8Ft. 05-04497 $87.50 Blue Knob, 10Ft. 05-04498 $90.25 Blue Knob, 12Ft. 05-04499 $93.25 Red Knob, 4Ft. 05-04156 $73.00 Red Knob, 6Ft. 05-04157 $75.50 Red Knob, 8Ft. 05-04158 $78.85 Red Knob, 10Ft. 05-04159 $81.00 Red Knob, 12Ft. 05-04160 $83.50 MC6250 Controls (Threaded End) Description Part No. Price Black Knob, 4Ft. 05-04501 $83.50 Black Knob, 5Ft. 05-04502 $94.75 Black Knob, 6Ft. 05-04503 $85.75 Black Knob, 7Ft. 05-04504 $97.75 Black Knob, 8Ft. 05-04505 $99.25 Black Knob, 9Ft. 05-04506 $89.50 Black Knob, 10Ft. 05-04507 $101.95 Clear Knob, 4Ft. 05-04508 $93.25 Clear Knob, 5Ft. 05-04509 $94.75 Clear Knob, 6Ft. 05-04510 $73.00 Clear Knob, 7Ft. 05-04511 $97.75 Clear Knob, 8Ft. 05-04512 $99.25 Clear Knob, 9Ft. 05-04513 $89.50 Clear Knob, 10Ft. 05-04514 $101.95 Blue Knob, 4Ft. 05-04515 $83.50 Blue Knob, 5ft 05-04516 $94.75 Blue Knob, 6ft. 05-04517 $96.25 Blue Knob, 7Ft. 05-04518 $97.75 Blue Knob, 8Ft. 05-04519 $99.25 Blue Knob, 9Ft. 05-04522 $90.50 Blue Knob, 10ft. 05-04523 $101.95 Red Knob, 4Ft. 05-04524 $83.50 Red Knob, 5Ft. 05-04525 $94.75 Red Knob, 6Ft. 05-04526 $86.25 Red Knob, 7Ft. 05-04527 $87.50 Red Knob, 8Ft. 05-04528 $89.00 Red Knob, 9Ft. 05-04529 $101.95 Red Knob, 10Ft. 05-04530 $92.85
Wire clamps for solid wire controls for Cessna Aircraft. Wire clamps are used on solid wire controls including cabin air, mixture control, strainer drain, cabin heat, defrost, flap and many others. FAA-PMA approved for Cessna 120 through the 425 series aircraft. Unique design to reduce wire stress. Manufactured from heat treated stainless steel for better wear and corrosion resistance. *Please visit our website for part specifications and application information. Manufacturer Part No. Part No. Price MCS2323-1 05-04583 $11.60 MCS2323-2 05-04584 $23.93 MCS2323-3 05-04585 $23.93 MCS2323-4 05-04586 $15.25 MCS2323-5 05-04587 $10.90 MCS2323-6 05-04588 $22.90 MCS2323-7 05-04589 $21.70 MCS2323-8 05-04590 $23.93 MCS2323-9 05-04591 $23.93 MCS2323-10 05-04592 $23.93 MCS2323-11 05-04593 $13.85 MCS2323-12 05-04594 $23.93 MCS2323-13 05-04595 $19.38 MCS2323-14 05-04596 $19.80 MCS2323-19 05-04597 $23.93
This Aileron Direct cables eligible for installation in Cessna 188A and A188A aircraft, serial range 18800573 thru 18800707. This cable has also been added to the cable kit CCKT188-04 188A, A188A 1970-1971 Serial Number 18800573-18800707 P/N 05-04614 ................$122.50
199
05-04169 $280.95
05-04170 $282.95
Aileron Upper Inbd LH 05-03373 Aileron Upper Inbd RH 05-03374 Aileron Upper Otbd LH 05-03375 Aileron Upper Otbd RH 05-03376
MC0523800-10 Aileron Lower Inbd LH 05-03377 MC0523800-11 Aileron Lower Inbd RH 05-03378 MC0523800-12 Aileron Lower Otbd LH 05-03379 MC0523800-13 MFG P/N SKN-KT-AIL2 MC1624001-5 MC1624001-6 MC1624001-9 MC1624001-10 MC1624001-3 MC1624001-4 MC1624001-7 MC1624001-8 MFG P/N SKN-KT-AIL3 MC1220085-11 MC1220085-12 MC1220085-13 MC1220085-14 Aileron Lower Otbd RH Description Skin Kit 05-03380 P/N
05-04172 $355.95 05-04121 $113.95 05-04122 $113.95 05-04123 $105.95 05-04124 $105.95
05-04141 $1,498.00
Aileron Upper Inbd LH 05-04145 Aileron Upper Inbd RH 05-04146 Aileron Upper Otbd LH 05-04149 Aileron Upper Otbd RH 05-04150
Aileron Lower Inbd LH 05-04143 Aileron Lower Inbd RH 05-04144 Aileron Lower Otbd LH 05-04147 Aileron Lower Otbd R 05-04148 Description Skin Kit Aileron Upper LH Aileron Upper RH Aileron Upper LH Aileron Upper RH P/N 05-04142 05-04126 05-04127 05-04128 05-04129
200
CM WP ME HA AP LG EP CS IN EL AV
0543022-1; L $313.95 0543022-2; R $314.95 0743008-1; L 0743008-2; R 0743008-1; L 0743008-2; R $457.00 $457.00 $457.00 $457.00
This FAA-PMA approved stainless steel Cessna Fuel Screen Standpipe is the last one you will need to buy. Improved design eliminates corrosion pits and stripped threads. 1963 and on. P/N AS0756011-1 ...........$114.95
P/N 05-04427 TL-KT-1 ..P/N 05-04427 ....$88.75 TL-KT-4 ..P/N 05-04620 ..$129.75 TL-KT-6 ..P/N 05-04622 ..$108.95
Keep the exhaust and cold out of the cabin with these Kevlar/Fiberglass FAA/PMA approved Steering Rod Boots. These will last much longer & are less expensive than original Cessna boots. FAA/PMA approved Steering Rod Boot application chart for Cessna Model Series 150, 152, 172, 175, and 182 Aircraft.
Model 150 150A,B,C,D,E, F,G,H,J,K,L,M A150K, L, M F150F,G,H,J,K,L,M FA150K, L FRA150L,M 152 A152 F152 FA152 172 172A,B,C,D,E,F, G,H,I,K,L,M,N,P F172D,E,F,G,H, K,L,M,N,P FP172 FR172E,F,G,H,J,K 175 175A, B, C 182 182A, B, C, D Serial No. 17001 59018 15059019 15079405 A1500001 A1500734 F1500001 F15001428 FA1500001 F1500120 FRA1500121 FRA1500336 15279406 15286033 A1520735 A1521049 F15201429 F15201980 FA1520337 FA1520425 28000 46754 46755 17276673 F1720001 F17202254 FP1720001 FP1720003 FR17200001 FR17200675 55001 56238 56239 17557119 33000 53007 18253008 18253598 Part No. Price/
05-00277
$59.80
Before
05-00277 $59.80
After
This new fuel selector plate is billet machined and anodized, with the text engraved on the plate. It is an efficient one piece design which is easy to install & factory guaranteed. FAA-PMA approved.
05-00279
$84.50
05-00279 05-00279
$84.50 $84.50
Cessna 172 - 37 Gals. ............... P/N 05-00227................. $52.95 Cessna 170 - 37 Gals. ............... P/N 05-00899................. $61.95 Cessna 172 - 36 Gals. ............... P/N 05-00901................. $59.95 Cessna 180 - 55 Gals. ............... P/N 05-00902................. $52.95 Cessna 180 - 60 Gals. ............... P/N 05-00903................. $52.95 Cessna 180 - 79 Gals. ............... P/N 05-00904................. $52.95 Cessna 172 - 84 Gals. ............... P/N 05-00905................. $52.95 Cessna 182 - 55 Gals. ............... P/N 05-00906................. $59.95
This part replaces Cessna part number 0750121. This intake Heat Shield Deflector is vibration dampened to prevent cracking! It is made of polished stainless steel for better heat control. FAA approved. P/N 05-02361 .............. $114.95
Eligibility List Aircraft Models 175*, A,B,C P172 180, A,B,C,D,E,F,G,H,J,K 182,A,B,C,D,E,F,G,H,J,K,L,M,N,P,Q,R F182P,Q A182J,K,L,M,N T182 185,A,B,C,D,E/A185E,F 185,A,B/A188,A,B T188C 205,A 206 U206,A,B,C,D,E,F,G P206,A,B,C,D,E,/TP206A,B,C,D,E TU206A,B,C,D,E,F,G 207,A/T207,A 210,A,B,C,D,E,F,G,H,J,K,L,M,N,R/ T210K,LM,N,R P210N,R T210G,H,J Serial Numbers 56083 thru 17557118 P17257120 thru P17257188 30000 thru 18053203 33000 thru 18268615 F18200001 thru F18200169 A182-0001 thru A182-0148 18267716 thru 18268615 185-0001 thru 18504448 188-0001 thru 18803968T T18803297T thru T18803968T 205-0001 thru 205-0577 206-0001thru 206-0275 U206-0276 thru U20607020 P206-0001 thru P20600647 U206-0438 thru U20607020 20700001 thru20700788 57001 thru 21065009 P21000001 thru P21000874 T210-0198 thru T210-0454
TO PS BV
Description Left/Right/Off FAA PMA C120 AND C140 Left/Right/Both/off FAA PMA C120 AND C140
Model
Part No.
Price
For checking seat rail wear limits as per FAA A.D. 87-20-03, Effective 09/24-/1990 Seat Rail Directive The gauge is to be used for inspection of the Cessna seat rail wear. This gauge is designed to measure the actual radius wear near the seat stop holes. Notice the different sized steps in each corner. P/N 05-04428 ............................ $37.95
Our P/Ns are interchangeable with Cessnas P/Ns; AS prefix denotes Aircraft Spruce! Call our parts specialists at Aircraft Spruce for part number assistance.
201
These FAA-PMA replacement seat parts were developed to assist in complying with the parts replacement requirements of A.D. 87-20-03. This A.D. requires the periodic inspection and replacement of seat components of the entire Cessna light aircraft fleet. Our Parts are direct replacements for the wear related seat components. These seat parts are superior to the O.E.M. parts in many ways. Our rollers are fabricated from molydisulfide filled nylons for improved strength and self lubrication. All rollers are fully machined from extruded stock for finer surface finishes and higher strength. Our wear washers are tougher with far better wear and aging resistance. Seat rails were carefully engineered with small improvements for added strength, longer life, and easier installation without any sacrifice of full interchangeability with the O.E.M. parts.
Flap attachment kits are available for Cessna aircraft from Cessna 150 thru T210. Each kit contains FAA-PMA replacement rollers, bushings, and spacers for the flap attachment of one airplane. Our ASS14505N12-050 shims are stainless steel for better corrosion resistance. Individual FAA-PMA components are available on request.
Model 150 150 152 152 F152 F152 A152 A152 FA152 FA152 170B 172 172 172 177 175 180 182 182 185 188 205 206 207 210 210 T210 Serial No. 17001-15071128 15071129 & on 15279406 - 15285564 15285565 & on F15201429-F15201908 F15201909 & on A1520735-A1521014 A1521015 & on FA1520337-FA1520387 FA1520388 & on ALL 28000-17249544 17249545-17274009 17274010 & on ALL ALL ALL 33000-18253598 18253599 & on ALL ALL ALL 2060001-20601568 ALL 57001-21058220 21058819 & on T2100001-T2100197 Year 59-69 70-77 78-80 81 & on 78-80 81 & on 78-80 81 & on 78-80 81 & on 52-54 55-62 63-80 81 & on 68-78 58-62 53-82 56-62 63 & on 61-82 66-84 63-64 64-70 69-84 60-63 80 & on 64-66 Kit No. FLP-KT-1 FLP-KT-2 FLP-KT-2 FLP-KT-3 FLP-KT-2 FLP-KT-3 FLP-KT-2 FLP-KT-3 FLP-KT-2 FLP-KT-3 FLP-KT-1 FLP-KT-1 FLP-KT-2 FLP-KT-3 FLP-KT-4 FLP-KT-1 FLP-KT-1 FLP-KT-1 FLP-KT-3 FLP-KT-1 FLP-KT-3 FLP-KT-1 FLP-KT-4 FLP-KT-4 FLP-KT-1 FLP-KT-7 FLP-KT-6 Part No. Kit Price 05-00317 $269.95 05-00318 $275.95 05-00318 $275.95 05-00319 $243.95 05-00318 $275.95 05-00319 $243.95 05-00318 $275.95 05-00319 $243.95 05-00318 $275.95 05-00319 $243.95 05-00317 $269.95 05-00317 $269.95 05-00318 $275.95 05-00319 $243.95 05-00321 $404.95 05-00317 $269.95 05-00317 $269.95 05-00317 $269.95 05-00319 $243.95 05-00317 $269.95 05-00319 $243.95 05-00317 $269.95 05-00321 $404.95 05-00321 $404.95 05-00317 $269.95 05-00324 $351.95 05-00323 $467.95
ASS14503510-032 Wear washer kit (8 req/kit) .P/N 05-00587 ..$2.80 ea. Aircraft Spruce now offers a seat roller housing measuring tool for Cessna aircraft. This gauge is designed to facilitate inspection of seat roller housings for wear as required by mandatory FAA AD 2011-10-09. This gauge simplifies determining whether the housing is in or out of tolerance by allowing the areas of concern to be gauged as opposed to measuring individual attributes of each housing with calipers. Results are positive and quick with this gauge. P/N 05-06819 .........................$120.95
These seat stops and related hardware are available in convenient kits for your aircraft. Call for the correct kit part no. for your Cessna aircraft. Seat stop kit #1 (1 ea. AS0713074-1, 1 ea. MS24665-132-1, 1 ea. MS20392-1C21) P/N 05-00580 ............................$14.50 Seat stop kit #2 (1 ea. AS0511242-1, 1 ea. MS35265-41) P/N 05-00581 ............................$12.95 Seat stop kit #3 (1 ea. AS0713074-1, 1 ea. MS24665-132, 1 ea. MS203921C21, 2 ea. NAS43DD1-9) P/N 05-00582 ............................$19.85 Saf-T-Stop is an auxiliary seat stop mechanism approved by the FAA for use with Cessna seat track A. D. #87-20-03. Installs easily, sliding over seat track. Approved for: Cessna 150, 152, 172, R172, 175, 180, 182, 185, 190, 205, 206, 207, 210, 303, 337. Not a seat lock, Saf-T-Stop is designed to restrict rearward motion if the seat lock fails. P/N 13-18510 ....$37.85
SAF-T-STOP
05-00427 05-00428
$73.65 $74.75
For Cessna Roller Kit 141410-212 use: (1) Roller (P/N ASS155-1) (1) Bushing (P/N AS1414104-54) (2) Washers (P/N ASS1554-1)
These parts are generally used on the standard seats These parts are generally used on the infinitely adjustable seats.
For Cessna Roller Kit 1714000K200 use: (1) Roller (P/N ASS1704-1) (1) Bushing (P/N AS1414104-54) (2) Washers (P/N AS1714000-22)
parts for Cessna seats. Model Series Eligible 150, 152, 170, 172, 175, 180, 182, 185, 195, 210
FAA-PMA Application chart for replacement Description Part No. AS0311310 roller 05-00325 AS0311586 bushing 05-00326 ASS1554-1 washer 05-00421 AS1714000-22 washer 05-00419 AS1714000-41 washer 05-00422 AS1414104-22 bushing 05-00323 ASS1704-1 roller 05-00423 ASS1551-1 roller 05-00420
These template blanks are used to transfer holes from the old seat rail to the new seat rail when replacing Cessna seat rails. These templates are economical and convenient to use. One per seat rail is required. For seat rail series AS511240, AS511243, and AS24114002 use SRTEM2. All other seat rail series can use SRTEM1. NOTE: Models 150-152 do not require templates as the screw holes are predrilled. Model 177 cardinal seat rails require (2) SRTEM1 templates per rail. * Dimensions: * SRTEM1-1.5 x 38 x .025 * SRTEM2-2.25 x 30 x .025 SRTEM1 ................... P/N 05-00449 ..............................$5.25 SRTEM2 ................. P/N 05-00450 ..............................$5.70 Spacer sleeve: made of aluminum alloy 2024 overall P/N 06-00639.........................$0.43
CESSNA SPACERS
202
The UNIVERSAL SAFETY FOOT is a secondary seat stop for both pilot and co-pilot seats for the 100 & 200 earlier Cessnas. Prevents the seat from sliding backwards when the pins are NOT engaged in the seat rails. Meets the requirements of the MANDATORY COMPLIANCE CESSNA ISSUED OWNER ADVISORY SEB07-5A dated 5-14-2007. This advisory requires all earlier 100 & 200 model Cessnas to have a secondary seat stop installed within 24 months from the date of the advisory. Issued as a NO HAZARD INSTALLATION APPROVAL by the FAA dated 4-27-2006, the Safety Foot can be installed by the owner/operator of the aircraft. Due to its simple design, the Safety Foot can be installed in about 45 minutes and in most cases, the seats do not have to be removed from the aircraft. Clamped to the seat frame and integral with the existing seat retention and operating mechanism of the aircraft. Three Allen wrenches and a Setting Gage are the only tools required for the installation. The Setting Gage is provided in the kit along with detailed instructions. The product is warranted for 12 months from the date of purchase. P/N 05-04104 ......................$175.00
UNIVERSAL SAFETY-FOOT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* Less money and longer life! * Bronze bushings at the pivot points resist wear and vibration for longer pedal life. * Precision cast heat treated aluminum alloy * Power coat finish for durability and corrosion protection. * FAA-PMA direct replacement for Cessna (Part #1460320-1) Model AP2000-01 ................................... PN 05-04165...............$121.95
RE-BUSHED RUDDER PEDAL Model Numbers: 0760678-1, 0760678-2 and 1460320-1 * FAA approved repair for magnesium rudder pedals. * Worn and elongated pedal holes are reamed and fitted with bush ings for a longer life * Bronze bushings resist vibration and corrosion wear longer than the magnesium casting. * Fits most single engine Cessnas from 1963-1981, except for model 188 Model 0760678-1-R .............PN 05-04166 .........$97.25 ......$40.00 Core Model 0760678-2-R .............PN 05-04167 .........$70.75 ......$40.00 Core Model 1460320-1-R .............PN 05-04168 .........$83.25 ......$30.00 Core Core Credit Eligibility: Large Hole Dia. Max <0.490 Small Hole Dia. Max <0.275 Pedals worn beyond these limits are not eligible for core credit. Rebushed pedals may be returned for core credit but must follow the same criteria.
For the Cessna Cardinal 177RG aircrarft. McFarlanes blue vulcanized Viton rubber tip will outlast the original in any fuel! All metal, one piece design eliminates the flimsy C-clip. Model Serial No. Replaces 177RG 177RG0001 thru 177RG1366 2016021-4 F177RG F177RG0001 thru F177RG0177 2016021-4
* 1 each required for aircraft serial numbers 177RG0001 thru 177RG0282 and F177RG0001 thru F177RG0062. * 2 each required for aircraft serial numbers 177RG0283 thru 177RG1366 and F177RG0063 thru F177RG0177.
This is screw kit specifically for the Cessna 150/152 seat rails. This #10 Structural Screw Kit contains all screws and nuts required to install four seat rails.
Kit Contains: 40 MS27039-1-08 Screw 10-32 x .531 2 MS27039-1-09 Screw 10-32 x .594 2 MS27039-1-17 Screw 10-32 x 1.094 40 MS21044N3 Nut, Nylon Lock P/N 05-04107 ....................... $21.65
One side is embossed with a surface texture for improved locking strength and to make sure the washer does not slip while tightening. Features: * Up to four times the locking power for less! * FAA approved using stronger material than the original, allowing the standard washer to be eliminated. * Designed with six tabs instead of two. * Easier to use! * Cessna 180, 182, 185, 188, 205, 206, 207, 210, 310, 320, 411, and 414 model aircraft P/N 05-01742............................. $6.50
203
CESSNA PARTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These kits include two bushing sizes for each hinge location. This allows a selective fit and solves the common Cessna fit and interference problems. Hardened corrosion resistant stainless steel. Cessna models 120 thru 177 Convenient kits include all bushings, sintered bronze bearings, and hardware for one aircraft. All components are also available separately.
Model 120, 140, 140A (Bushing) 120, 140, 140A (Bushing) 150, 150A, B, C, D, E 150F, G, H, J 150K*, A150K* Eligibility Note 1 (150K S/N 15071129 THRU 15071621; A150K S/N A1500001 THRU A1500129) 150K*, L,M, A150K*, L,M Eligibility Note 2 (150K S/N 15071622 THRU 15072003; A150K S/N A1500130 THRU A1500226) A-150L, A-A150L F150F,G,H,J F150K,L*, FA150K* Eligibility Note 3 (F150L S/N 15000659 THRU F15000699; FA150K S/N FA1500001 THRU FA1500039) F150L*, M, FA150K*,L,M Eligibility Note 4 (F150L S/N 15000700 THRU F15001143; F150K S/N FA1500040 THRU FA1500081) FRA150L, M 152*, A152* Eligibility Note 5 (152 S/N 15279406 THRU 15285833; A152 S/N A1520735 THRU A1521025) 152*, A152* Eligibility Note 6 (152 S/N 15285834 THRU 15286033; A152 S/N A1521026 THRU A1521049) F152*, FA152* Note Eligibility Note 7 (F152 S/N 15201429 THRU F15201943; FA152 S/N FA1520337 THRU FA15203879) F152*, FA152* Eligibility Note 8 (F152 S/N F1501944 THRU F15201980; FA152 S/N FA1520388 THRU FA1520425) 172, 175 172A,B,C* 175A,B,C* Eligibility Note 9 (172C S/N 17248735 THRU 17249085; 175C S/N 17557003 THRU17557064) 172C*,175C* Eligibility Note 10 (172C S/N 17249086 THRU 17249544; 175C S/N 17557065 THRU 17557119) 172D,E,F,G,H,I,K,L,M,N,P* Eligibility Note 11 (172P S/N 17274010 THRU 17275963) 172P*,Q,R,S Eligibility Note 12 (172P S/N 17275964 THRU 17276654) 172RG, ,P172D, R172K F172D,E,F,G,H,K,L,M,N,P* Eligibility Note 13 (172P S/N F17202040 THRU F17202208) F172P* Note Eligibility Note 14 (172P S/N F17202209 THRU F17202254) F172, FR172E,F,G,H,J,K 177,177A,B,177RG,F177RG Elevator Bushing Kit MC0422215 EBC-KT-1 EBC-KT-1 EBC-KT-1 EBC-KT-2 EBC-KT-2 EBC-KT-1 EBC-KT-1 EBC-KT-2 EBC-KT-2 EBC-KT-3 EBC-KT-4 EBC-KT-3 EBC-KT-4 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 EBC-KT-5 Rudder Bushing Kit MC0431119K MCS1003-11A RBC-KT-1 RBC-KT-2 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-2 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-3 RBC-KT-4 RBC-KT-5 RBC-KT-6 RBC-KT-6 RBC-KT-7 RBC-KT-6 RBC-KT-6 RBC-KT-7 RBC-KT-6 MC0532104K
A universal joint attaches to each control yoke shaft behind the instrument panel. Slack or roughness in control yoke motion commonly indicates excess universal joint wear or corrosion that may necessitate replacement. MC0411257 - A universal joint attaches to each control yoke shaft behind the instrument panel. Slack or roughness in control yoke motion commonly indicates excess universal joint wear or corrosion that may necessitate replacement. Restores safe, responsive control. Cessna models 120 thru 185 P/N 05-04558 ................. $224.75
UJC-KT-1 - A universal joint attaches to each control yoke shaft behind the instrument panel. Slack or roughness in control yoke motion commonly indicates excess universal joint wear or corrosion that may necessitate replacement.Replace worn or corroded joints. Cessna models 150 thru A185
Part Number AN3-10A AN3-11A MC0411257 MC6183 MS21044N3 Kit Contents Description BOLT BOLT UNIVERSAL JOINT, Control Yoke SLEEVE, Pin Retention NUT, Lock, Nylon, 10-32 Qty 2 2 1 1 2
UJC-KT-2 - A universal joint attaches to each control yoke shaft behind the instrument panel. Slack or roughness in control yoke motion commonly indicates excess universal joint wear or corrosion that may necessitate replacement.
Kit Contents Description BOLT BOLT UNIVERSAL JOINT, Control Yoke NUT, Lock, Nylon, 10-32 Qty 2 2 1 2
P/N 05-04561 ................. $245.95 MC6183 - A universal joint attaches to each control yoke shaft behind the instrument panel. Slack or roughness in control yoke motion commonly indicates excess universal joint wear or corrosion that may necessitate replacement. The universal joints and the sleeve are available separately or together in the kit UJC-KT-1 for Cessna models 150 thru A185. Each convenient kit also includes installation hardware.P/N 05-04559 ..................... $4.40 Install it right on the plane. Simply drill out the two rivets holding your old latch system on your door. You will use these two same holes to install the Blue Sky Latch. The latch is made from TPE (thermal plastic rubber), it has excellent weather ability, and stands up to extreme temperatures. Next use a hack saw blade and cut off that point on your door stem. Then use a small hammer and tap the strike on the end. Align your door using the phillips head adjustment on your door stem. Your done. The Thermal plastic rubber acts a bumper as well as a latch. You get all the hardware including structural AN screws and elastic stop nuts in the kit. Step by Step installation guide with photos showing how easy it is to install. C150 & 152 ..........P/N 05-04563 ...........$39.95 C172 ....................P/N 05-04973 ...........$39.95 Makes installation of the aft flap roller, bushing and washers easy. Holds parts in alignment while inserting the bolt. Long handle allows access through the small inspection openings. Cessna 150 thru 210. ......................... P/N 05-04764 ....................$31.85
Unless otherwise noted, approval is for all serial numbers for each model listed. The eligibility for the kits also applies to the component bushings and bearings.
RUDDER BUSHING KIT COMPONENTS: 2 Bearings, 2 Bushings, 2 Bolts, 2 Washers, 2 Nuts, and 2 Pins. RBC-KT-1.................P/N 05-04569 .........$16.90 RBC-KT-2.................P/N 05-04570 .........$59.90 RBC-KT-3.................P/N 05-04571 .........$46.25 RBC-KT-4.................P/N 05-04572 .........$42.50 RBC-KT-5.................P/N 05-04573 .........$49.71 RBC-KT-6 ......................................................P/N 05-04574 .........$44.75 RBC-KT-7 ......................................................P/N 05-04575 .........$49.27
This unique tool is specifically designed to prevent damage when installing or removing sintered bronze elevator and rudder hinge bearings in Cessna aircraft. Seven piece kit for common bearing sizes. Heat treated stainless steel will last a lifetime. Kit comes in a convenient storage pouch. P/N 05-04869 .........................$65.50
A Supplemental Type Certificate (STC) that will increase the useful load of a Cessna 182P or 182Q by 150 to 160 pounds, and the ramp weight (in most cases) by 160 pounds. This STC requires no parts, no modifications, and no installation labor costs. .................. P/N 05-04889 ..................$750.00
204
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
172 I, K, L BAFFLES
172M BAFFLES
150 BAFFLES
Baffle Number Part No. Price AF0555298-3 ................................05-03121 ..............................$200.95 AF0555233-1 ................................05-03122 ................................$75.85 AF0555235-1 ................................05-03123 ..............................$201.95 AF055524-1 ..................................05-03124 ..............................$105.95 AF0555259-1 ................................05-03125 ................................$25.00 AF0555213-5 ................................05-03038 ..............................$105.95 AF0555250-9 ................................05-03039 ..............................$225.95 AF0555214-7 ................................05-03041 ..............................$105.95 AF0555259-14 ..............................05-03043 ..............................$225.95 172N Baffle Set ...........................05-03274 ..............................$995.00 Baffle Number Part No. Price AF0555309-1 ................................05-03035 ..............................$200.95 AF0555318-1 ................................05-03037 ..............................$116.95 AF0555213-5 ................................05-03038 ..............................$105.95 AF0555250-9 ................................05-03039 ..............................$225.95 AF0555211-9 ................................05-03040 ..............................$200.95 AF0555214-7 ................................05-03041 ..............................$105.95 AF0555307-1 ................................05-03042 ................................$25.00 AF0555259-14 ..............................05-03043 ..............................$225.95 AF0555215-4 ................................05-03126 ................................$76.50 172P Baffle Set ...........................05-03275 ..............................$978.00 Baffle Number Part No. Price AF1755004-1 ................................05-03147 ..............................$218.95 AF1755007-1 ................................05-03148 ..............................$100.95 AF1755009-1 ................................05-03149 ..............................$100.95 AF1755005-2 ................................05-03150 ..............................$201.95 AF1755010-1 ................................05-03151 ..............................$100.95 AF1755005-1 ................................05-03152 ..............................$201.95 AF1755008-1 ................................05-03153 ..............................$100.95 AF1755003-1 ................................05-03154 ..............................$218.95 177 Baffle Set ..............................05-03279 ...........................$1,335.00 Baffle Number Part No. Price AF0750128-20 ..............................05-01528 ..............................$261.95 AF0750128-19 ..............................05-01530 ..............................$106.95 AF0750128-21 ..............................05-01531 ................................$78.00 AF0750128-23 ..............................05-01532 ..............................$106.95 AF0750128-22 ..............................05-01533 ..............................$261.95 AF0750128 ...................................05-01550 ..............................$139.95 AF0750117-30 ..............................05-01552 ................................$39.00 AF0750135-4 ................................05-01561 ................................$25.00
172N BAFFLES
172P BAFFLES
152 BAFFLES
177 BAFFLES
180-182 BAFFLES
All baffles are bare 6061-T6 aluminum unless the powder coating option is chosen. The powder coating finish is a black and grey hammertone. Powder coating option available for an additional 15%. The silicone baffle seal material is available in orange, dark blue, and black. FOR DIAGRAMS AND ELIGIBILITY INFORMATION PLEASE VISIT OUR WEBSITE AT: www.aircraftspruce.com
205
206 EARLY MODEL Baffles Cont. AF1250100-15 ...............................05-03191 ..............................$139.95 AF1250100-41 ..............................05-03192 ..............................$257.95 AF1250100-12 ..............................05-03193 ................................$44.00 AF1250105-2 ................................05-03194 ................................$40.00 206 Early Model Baffle Set ........05-03280 ...........................$1,799.00
Baffle Number Part No. Price AF1255008-22 ..............................05-01560 ..............................$272.95 AF0750135-4 ................................05-01561 ................................$25.00 AF750135-1 ..................................05-01563 ................................$51.65 AF1255032-4 ................................05-01572 ..............................$318.95 AF0851700-96 ..............................05-01574 ................................$23.00 AF1255032-2 ................................05-01575 ..............................$290.95 AF1255025-1 ................................05-01576 ................................$40.00 AF1255010-10 ..............................05-01577 ................................$71.00 AF1255028-1 ................................05-01578 ..............................$194.95 AF1255011-5 ................................05-01579 ................................$28.00 AF1255008-12 ..............................05-01580 ................................$99.00 AF1255008-20 ..............................05-01581 ..............................$472.00 AF0750117-31 ..............................05-01582 ................................$39.00 AF1255032-3 ................................05-01584 ..............................$328.95 AF0750135-3 ................................05-01585 ................................$25.00 AF1255032-1 ................................05-01587 ..............................$219.95 AF1255009-8 ................................05-01588 ................................$96.00 AF1250966-1 ................................05-01589 ................................$69.00 AF0750152-3 ................................05-01590 ................................$21.75 AF1255011-51 ..............................05-03232 ................................$30.00 AF1255020-1 ................................05-03233 ................................$31.00 AF1250134-2 ................................05-03234 ................................$50.00 AF1255026-1 ................................05-03235 ................................$19.00 AF1250966-3 ................................05-03236 ................................$16.00 AF1250961-5 ................................05-03237 ................................$29.00 206 Late Model Baffle Set ..........05-03285 ...........................$2,778.00
185 BAFFLES
Baffle Number Part No. Price AF0750135-3 ................................05-01540 ................................$25.00 AF0750135-4 ................................05-01561 ................................$25.00 AF0750135-1 ................................05-01563 ................................$51.65 AF0851700-96 ..............................05-01574 ................................$23.00 AF0750117-31 ..............................05-01582 ................................$39.00 AF1250105-2 ................................05-03195 ................................$40.00 AF1250100-12 ..............................05-03196 ................................$44.00 AF1250100-41 ..............................05-03197 ..............................$257.95 AF1250100-15 ..............................05-03198 ..............................$139.95 AF1250927-1 ................................05-03199 ..............................$244.95 AF1250137-1 ................................05-03201 ..............................$244.95 AF1250135-3 ................................05-03202 ................................$41.00 AF1250100-8 ................................05-03203 ..............................$139.95 AF1250100-18 ..............................05-03418 ..............................$267.95 AF1250105-1 ................................05-03205 ................................$40.00 207 Early Model Baffle Set ........05-03281 ...........................$1,799.00
C-200 EARLY MODEL OIL COOLER BAFFLES 206 EARLY MODEL BAFFLES
Baffle Number Part No. Price AF0750135-4 ................................05-01561 ................................$25.00 AF0750135-1 ................................05-01563 ................................$51.65 AF0851700-96 ..............................05-01574 ................................$23.00 AF0750117-31 ..............................05-01582 ................................$39.00 AF0750135-3 ................................05-01585 ................................$25.00 AF1250105-1 ................................05-03068 ................................$40.00 AF1250719-1 ................................05-03069 ................................$50.00 AF1250100-23 ..............................05-03070 ..............................$311.95 AF1250100-8 ................................05-03071 ..............................$139.95 AF1250135-3 ................................05-03072 ................................$41.00 AF1250100-15 ..............................05-03073 ..............................$139.95 AF1250100-41 ..............................05-03075 ..............................$257.95 AF1250100-12 ..............................05-03076 ................................$44.00 AF1250105-2 ................................05-03077 ................................$40.00 210 Early Model Baffle Set ........05-03269 ...........................$1,972.00
Baffle Number Part No. Price AF0851700-96 ..............................05-01538 ................................$23.00 AF0750152-3 ................................05-01590 ................................$21.75 AF1250105-1 ................................05-03206 ................................$40.00 AF1250135-3 ................................05-03209 ................................$41.00 AF1250829-11 ..............................05-03210 ................................$72.00 AF1250105-2 ................................05-03211 ................................$40.00
All baffles are bare 6061-T6 aluminum unless the powder coating option is chosen. The powder coating finish is a black and grey hammertone. Powder coating option available for an additional 15%. The silicone baffle seal material is available in orange, dark blue, and black. FOR DIAGRAMS AND ELIGIBILITY INFORMATION PLEASE VISIT OUR WEBSITE AT: www.aircraftspruce.com
206
CM WP ME HA AP
Model Serial Number Qty Per A/C 180* 32151 thru 32661 2 180A,B,C,D,E 32662 thru 18051183 1 18OF,G,H,I,K 18051184 thru 18053203 2 182 33060 thru 33482 2 182A,B,C,D,E,F,G,H,J,K,L,M,N,P* 33483 thru 18262465 1 182P*,Q,R 18262466 thru 18268615 2 188,A,B 188-0001 thru 18802348 2 A188,A,B 188-0001 thru 18803968T 2 T188C T18803297T thru T18803968T 2 205,A 205-0001 thm 205-0577 2 206 206-0001 thru 206-0275 2 U206,A,B,C,D,E,F,G U206-0276 thru U20607020 2 P206,A,B,C,D,E P206-0001 thru P20600647 2 207,A 20700001 thru 20700788 2 210,A,B,C,D,E,F,G,H,J,K,L,M,N,R 57001 thru 21065009 2 310,B,C,D,E,F,G,H,I,J,K,L,N 35000 thru 310N0198 2 P/N 05-02136 ...................................................................................................... $45.50
LG EP CS IN
Model Serial Number Qty Per A/C 310P,Q,R/T310,P,Q,R 310P0001 thru 310R2140 6 320D,E,F 320D0001 thru 320F0045 6 335 335-0001 thru 335-0065 6 340,A 340-0001 thru 340A1817 6 401,A,B 401-0001 thru 401B0300 6 402,A,B,C 402-0001 and On 6 414,A 414-0001 and On 6 P/N 05-02137 ......................................................................................................$44.25
EL AV TO
Model Serial Number Qty Per A/C 310P,Q,R/T310,P,Q,R 310P0001 thru 310R2140 2 320D,E,F 320D0001 thru 320F0045 2 335 335-0001 thru 335-0065 2 340,A 340-0001 thru 340A1817 2 401,A,B 401-0001 thru 401B0300 2 402,A,B,C 402-0001 and On 2 414,A 414-0001 and On 2 P/N 05-02138 ......................................................................................................$44.75
PS BV
207
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
What Makes These Composite Parts Such An Excellent Value? * Stronger than factory originals with no weight increase. * Easily repaired with locally available fiberglass kits if ever damaged. * Exact replacements of original equipment means easy installation. * Money back guarantee if not completely satisfied!
STRUT CUFFS
Heres an unbeatable item for renovating your Cessna; a set of replacement strut cuffs. Order just one cuff to replace a damaged original, or get a set of four for a complete replacement. Photo Description 150/152 Strut Cuff Upper RH (SA-0522150-4) 150/152 Strut Cuff Upper LH (SA-0522150-3) 150/152 Strut Cuff Lower RH (SA-0421002-2) ---150/152 Strut Cuff Lower LH (SA-0421002-1) 150/152 Aerobat Strut Cuff Upper RH (SA-0421002-3) 150/152 Aerobat Strut Cuff Upper LH (SA-0421002-4) 150/152 Aerobat Strut Cuff Lower RH (SA-0522150-6) 150/152 Aerobat Strut Cuff Lower LH (SA-0522150-7) Part No. Price
05-03713 $72.50
05-03703 $69.95
150 Vertical Fin Cap (no beacon) 05-03715 $72.50 1966-74 (SA-0431013-3) ---150 Vertical Fin Cap (small beacon) 1966-74 (SA-0431017-1) 150/152 Vertical Fin Cap (small beacon) 1975&on (SA-04300111) 150 Rudder Top 1959-1963 (SA0430004-2) 150 Rudder Top 1964-1965 (SA0430004-8) 05-03714 $105.95 05-03716 $105.95 05-03717 $98.75 05-03718 $98.50
05-03702 $69.85
150/152 Rudder Top 1966-1974 05-03719 $98.50 (SA-0431013-1) 150 Rudder Top 1975&on (SA0430011-2) ---150 Rudder Bottom 1959-1965 (SA-0430004-1 ) 150 Rudder Bottom 1966&on (SA-0431005-1)
05-03707 $82.50
05-03704 $82.50
05-03705 $82.50
150/152 Wing-Tip (small droop) 05-03726 $275.00 LH (SA-0523565-29) 150/152 Wing-Tip (small droop) 05-03727 $275.00 RH (SA-0523565-30) ---150/152 Std. Small Wing Tip 05-03725 $265.95 (SA-0430008-3 ) 150 Dorsal Fin 1959-65 (SA05-03723 $265.95 0430004-4 ) ---150/152 Dorsal Tip 1966&on 05-03724 (SA-0431024-1) $32.50
05-03710 $98.50
150/152 Horizontal Stabilizer Tip 05-03711 $69.95 1964&on (SA-0430004-11) 150/152 Elevator Tips (left/right) 1964&on (SA-0430004-10) ---150/152 Elevator Tips (left/right) 1959-63 (SA-0430004-5)
WHEEL PANTS
Replace your original plastic wheel pants with high quality and durable fiberglass replacements. All wheel pants come with a 2 access plug for checking tire pressure. Original hardware is required for mounting. Photo Description 150/152 Wheel Pant 1971-74 RH (SA-0541223-16) 150/152 Wheel Pant 1971-74 LH (SA-0541223-17) 150/152 Nose Wheel Pant 1974&on (SA-0543079-3) Part No. Price
05-03731 $105.95
05-03728 $395.00
05-03729 $395.00
05-03730 $395.00
208
CESSNA 170/172/175
RUDDER & VERTICAL FIN CAPS
These parts are a snap to replace on most planes. Please note, indicate if you have a straight tail or a swept tail. It is also important to let us know if your fin cap needs to accommodate a strobe or beacon, and if so, if the light is front-mounted or center-mounted. Photo ------Description Part No. Price 172 Vertical Fin (no beacon) 05-03745 $75.00 1956-59 (SA-0531001-36 ) 172 Vertical Fin (large beacon) 05-03746 $120.95 1956-59 (SA-0531004-3) 172 Vertical Fin (no beacon) 1960-68 (SA-0531006-33) ---05-03747 $95.00
Here are some of our most popular items. These tips take a good deal of stress in just normal flying circumstances. Theyre also frequent victims of ramp rash. The original high impact plastic simply cant stand up to the task as well as fiberglass replacements from Stene Aviation. Plus, if these parts ever do withstand damage, theyre easily repaired with readily available fiberglass repair kits from you local automotive parts store. Photo Description Part No. Price 172 Horizontal Tip 1963 & on (SA-0532001-93) 172/175 Horizontal Tip Straight Tail (SA-0532001-61) 172 Elevator Tip 1963&on LH (SA-0532001-94) 172 Elevator Tip 1963&on RH (SA-0532001-100) 172/175 Elevator Tip Straight Tail (SA-0532001-62) 05-03744 $82.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
05-03743 $82.50
05-03742 $114.95
172 Vertical Fin (small beacon) 05-03752 $120.00 1960-68 (SA-0533009-1) 172 Vertical Fin (small beacon) 05-03748 $119.95 1960-68 (SA-0531009-1)
STRUT CUFFS
Heres an unbeatable item for renovating your Cessna; a set of replacement strut cuffs. Order just one cuff to replace a damaged original, or get a set of four for a complete replacement. Photo Description Part No. Price 172 Strut Cuff Upper 1973&on RH (SA-0523047-2) 172 Strut Cuff Upper 1973&on LH (SA-0523047-1) 05-03739 $79.85
172 Vertical Fin (small beacon) 05-03749 $120.95 1969-75 (SA-0531013-1) 172 Rudder Top 1976-85 (SA05-03753 $119.95 0531006-112) 172 Rudder Top 1997&on (SA05-03754 $98.50 0533155-2) 172 Vertical Fin (small beacon) 05-03750 $119.95 1976&on (SA-0531003-1) 172 Rudder Top 1960-68 (SA05-03751 $120.00 0531006-34) 172 Rudder Bottom 1960-68 (SA-0531006-35) 05-03756 $107.95 05-03755 $107.95 05-03757 $107.95
172 Strut Cuff Lower (all models) 05-03736 $74.85 RH (SA-0522150-2) 172 Strut Cuff Lower (all models) 05-03735 $75.00 LH (SA-0522150-1)
172/175 Rudder Bottom Straight Tail (SA-0531104) 172 Rudder Bottom 1969-80 (SA-0531006-80)
05-03726 $275.00
05-03766 $119.95 172 Wing Tip (small droop) 1968-72 RH (SA-0523565-30) 05-03727 $275.00
172 Brake Fairing 1974& on LH 05-03768 $125.95 (SA-0541224-1) 172 Brake Fairing 1974&on RH 05-03769 $124.95 (SA-0541224-2) 172 Wing Tip (small droop) 1973&on LH (SA-0723200-5) 05-03762 $275.00
WHEEL PANTS
Replace your original plastic wheel pants with high quality and durable fiberglass replacements. All wheel pants come with a 2 access plug for checking tire pressure. Original hardware is required for mounting. Photo Description 172 Wheel Pant 1974&on RH (SA-0541223-16) 172 Wheel Pant 1974&on LH (SA-0541223-17) 172 Nose Wheel Pant 1974 & on (SA-0543079-3) Part No. Price
05-03764 $275.00
05-03729 $395.00
05-03730 $395.00
05-03770 $35.00
209
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CESSNA FIBERGLASS REPLACEMENT PARTS FOR 177 What Makes These Composite Parts Such An Excellent Value? * Stronger than factory originals with no weight increase. * Easily repaired with locally available fiberglass kits if ever damaged. * Exact replacements of original equipment means easy installation. * Money back guarantee if not completely satisfied!
180/185 CONT.
STRUT CUFFS
Heres an unbeatable item for renovating your Cessna; a set of replacement strut cuffs. Order just one cuff to replace a damaged original, or get a set of four for a complete replacement. Photo Description Part No. Price 180 Strut Cuff Upper RH (SA0723605-4) 180 Strut Cuff Upper LH (SA0723605-3) ------180 Strut Cuff Lower RH (SA0723605-2) 180 Strut Cuff Lower LH (SA0723605-1) 05-03774 $82.50
STABILATOR TIPS
Here are some of our most popular items. These tips take a good deal of stress in just normal flying circumstances. Theyre also frequent victims of ramp rash. The original plastic simply cant stand up to the task as well as fiberglass replacements from Stene Aviation. Plus, if these parts ever do withstand damage, theyre easily repaired with readily available fiberglass repair kits from you local automotive parts store. Photo Description Part No. Price 172 Horizontal Tip 1963 & on (SA-0532001-93) 05-03744 $82.50
05-03845 $120.00
177 Brake Fairings 1972-74 RH 05-03848 $125.00 (SA-0741634-14) 177 Brake Fairings 1972-74 LH 05-03847 $125.00 (SA-0741634-13)
WHEEL PANTS
Replace your original plastic wheel pants with high quality and durable fiberglass replacements. All wheel pants come with a 2 access plug for checking tire pressure. Original hardware is required for mounting. Photo Description Part No. Price 177 Wheel Pant 1975&on RH (SA-0541223-16) 177 Wheel Pant 1975&on LH (SA-0541223-17) 177 Nose Wheel Pant 1975&on (SA-0543079-3) 05-03728 $395.00
05-03805 $170.00
05-03729 $395.00
05-03730 $395.00
05-03727 $275.00
180/185 Large Wing Tip 1962-69 05-03795 $375.00 LH(SA-1223000-7) 180/185 Large Wing Tip 1962-69 05-03796 $375.00 RH(SA-1223000-8) 180/185 Wing Tip (small droop) 1973&on LH(SA-0723200-5) 180/185 Wing Tip (small droop) 1973&on RH(SA-0723200-6) 05-03762 $275.00
05-03761 $265.00
210
CM WP ME HA AP LG EP CS IN
05-03799 $120.00
05-03777 $102.50
05-03778 $102.50
05-03806 $125.95
182 Horizontal Tip 1956-59 (SA05-03779 $85.00 0732613-1) 182 Horizontal Tip 1965&on (SA05-03780 $85.75 1232604-1)
STRUT CUFFS
Heres an unbeatable item for renovating your Cessna; a set of replacement strut cuffs. Order just one cuff to replace a damaged original, or get a set of four for a complete replacement. Photo Description 182 Strut Cuff Upper RH (SA0723605-4) 182 Strut Cuff Upper LH (SA0723605-3) 182 Strut Cuff Lower 1962&on RH (SA-0723612-4) 182 Strut Cuff Lower 1962&on LH (SA-0723612-3) Part No. Price 05-03774 $82.50
05-03773 $82.50
05-03726 $275.00
05-03776 $82.50 182 Wing Tip (small droop) 1969-72 RH (SA-0523565-30) 05-03775 $82.50 182 Wing Tip (small droop) 1973&on LH (SA-0723200-5) 182 Wing Tip (small droop) 1973&on RH (SA-0723200-6) ---182 Wing Tip (straight tip)1955-67 (SA-0723615-200) 05-03762 $275.00 05-03727 $275.00
EL AV TO PS BV
05-03784 $119.95
WHEEL PANTS
Replace your original plastic wheel pants with high quality and durable fiberglass replacements. All wheel pants come with a 2 access plug for checking tire pressure. Original hardware is required for mounting. Photo Description 182 Wheel Pant 1975&on RH (SA-0541223-16) Part No. Price
05-03728 $395.00
05-03792 $120.00
TAILCONE
Replace your wore and cracked tailcone with a stronger than factory original fiberglass tailcone from Stene Aviation. Photo Description 182 TailCone 1962&on (SA1212010-15) Part No. Price
05-03729 $395.00
05-03794 $275.95
211
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
What Makes These Composite Parts Such An Excellent Value? * Stronger than factory originals with no weight increase. * Easily repaired with locally available fiberglass kits if ever damaged. * Exact replacements of original equipment means easy installation. * Money back guarantee if not completely satisfied!
STRUT CUFFS
Heres an unbeatable item for renovating your Cessna; a set of replacement strut cuffs. Order just one cuff to replace a damaged original, or get a set of four for a complete replacement. Image Description Part No. Price 210 Strut Cuff Upper Right 1960---05-03817 $105.00 63(SA-1227002-4) 210 Strut Cuff Upper Left 1960---05-03818 $105.00 63(SA-1227002-5) 206/207 Strut Cuff Upper Right 1964---05-03821 $105.00 71(SA-1227002-10) 206/207 Strut Cuff Upper Left 1964---05-03822 $105.00 71(SA-1227002-11) 206/207 Strut Cuff Upper Right ---05-03826 $165.00 1972&on(SA-1227005-6) 206/207 Strut Cuff Upper Left ---05-03825 $165.00 1972&on(SA-1227005-5) 210 Strut Cuff Lower Right ---05-03815 $105.00 1960&61(SA-1227002-2) 210 Strut Cuff Lower Right ---05-03820 $105.00 1962&63(SA-1227402-6) 210 Strut Cuff Lower Left ---05-03819 $105.00 1962&63(SA-1227402-5) 205 Strut Cuff Lower Right ---05-03829 $120.00 1963&64(SA-1227401-4) 205 Strut Cuff Lower Left ---05-03830 $105.95 1963&64(SA-1227401-5) 206 Strut Cuff Lower Right 196471(SA-1227402-4) ---206 Strut Cuff Lower Left 196471(SA-1227402-3) 206/207 Strut Cuff Lower Right 1972&on(SA-1227010-2) 206/207 Strut Cuff Lower Left 1972&on(SA-1227010-1) 210 Strut Cuff Upper 1960-63 RH(SA-1227002-4) 210 Strut Cuff Upper 1960-63 LH(SA-1227002-5) ---210 Strut Cuff Lower 1960&61 RH(SA-1227002-2) 05-03824 $105.00 05-03823 $105.00 05-03828 $165.00
WING TIPS
Wing tips are a common victim of hanger and ramp rash. Maybe you thought the plane was going to clear those doors as you wheeled it back into the hanger...the first indication that you were wrong was that grating sound as the wing tip met metal. Heres the solution: replacement fiberglass wing tips from Stene Aviation. Image Description Part No. Price 206 Wing Tip (small droop) 1969-72 05-03726 $275.00 LH (SA-0523565-29) 207 Wing Tip (small droop) 1969&on 05-03726 $275.00 LH (SA-0523565-29) 206 Wing Tip (small droop) 1973&on 05-03762 $275.00 LH (SA-0723200-5) 206 Wing Tip (small droop) 1973&on 05-03764 $275.00 RH(SA-0723200-6) ------210 Wing Tip 1971&on LH(SA-1221111-203) 210 Wing Tip 1971&on RH(SA-1221111-202) 05-03835 $545.00 05-03834 $545.00
WHEEL PANTS
Replace your original plastic wheel pants with high quality and durable fiberglass replacements. All wheel pants come with a 2 access plug for checking tire pressure. Original hardware is required for mounting. Image Description Part No. Price 206 Wheel Pant 1975&on RH (SA05-03728 $395.00 0541223-16)
05-03827 $165.00 05-03817 $105.00 05-03818 $105.00 05-03815 $105.00 206 Wheel Pant 1975&on LH (SA05-03729 $395.00 0541223-17) 206 Nose Wheel Pant 1975&on (SA-0543079-3) 05-03730 $395.00
212
CM WP ME HA AP LG EP CS IN EL AV TO
This kit 118H has the additional hardware and instructions necessary for a first time installation for any of the lift strut fairings listed above. For those individuals that are not replacing their lift strut fairings, but wish to install the lift strut fairings as an initial installation P/N 05-04582 ......................................................................$38.75
Consist of two landing gear strut fairings that slip over the landing gear struts. These fairings are better than those manufactured by Cessna because they are made of fiberglass rather than a royalite type material, that bends and cracks after a short time on the aircraft. These fairings are all split so they slip over the landing gear strut. It is recommended, as with all plastics, they be painted for better UV protection. These kits are manufactured under a FAA PMA authority. Parts are listed with the Cessna number first, then Aircraft Spruces part number and price. Cessna Model 150L, 150M, A150L, A150M, 152, A152 172L thru 172R, R172K (172XP), 172SP 182P S/N 18260826 to 18263475 AND 182P S/N18263476 to 18264295 182P From S/N18264296, 182Q, 182R, 182S, T182R LH Fuselage 0441217-215 PN 05-03495 $140.00 1741005-239 PN 05-03496 $140.00 1741005-201 PN 05-03497 $140.00 0741052-201 PN 05-03499 $157.95 RH Fuselage 0441217-214 PN 05-03501 $159.95 1741005-240 PN 05-03502 $130.00 -----
PS BV
213
All 150, A150, 152, A152, 170A & B, P172, 175, 205 & L19. Also 172, 180, 185 for model year up through 1972. 182, 05-01526 206 for model year up through 1971. 207 from 1970 and up. (219-100) Kit 219-100 covers all of the above model aircraft and includes the plate lens. 172, R172K (172XP), 172RG, 180,185 for model year 1973 and up, 182,206 for model year 1972 and up. Kit 219-200 covers all the above model aircraft and includes the plate lens. 05-01545 (219-200)
EMPENNAGE TIPS
These empennage tips are made of fiberglass rather than the royalite type material that cracks after a short time on the aircraft. Fiberglass has the followCessna Tip Upper Tip Lower Tip Verticl Fin ing advantages over royalite type material, it is Models Rudder Rudder approximately six times stronger and 12 times 150F and 05-01518 stiffer, it resists ultra violet light and weathers up,A150, ----0431005-1-791 better, and it keeps its chemical composition 152, A152 $106.95 intact much longer. It is recommended, as with 05-01519 all plastics, they are painted for better UV pro- 150Fto 150L, ----tection. These kits are manufactured under a FAA PMA authorityTop line A150K, A150L 0431013-3-791 No Beacon $69.95 is Aircraft Spruce part number, middle line is Cessna part number. Bottom line is price. 150M and up 05-01520 05-01521
Cessna Models Tip Horizontal Tip Horizontal Fin L/H Fin R/H Tip Elev. L/H Tip Elev. R/H A150M and up, 152, A152 172K and up, 172RG, R172K(172XP) 172 1976 and up, 172RG, R172K(172XP) 0430011-1 $110.00 --0430011-2 $136.95 --05-01523 0531006-112 $111.95 --05-01522 0531006-80-791 $125.00 ---
150D, and 05-01513 05-01513 05-01514 05-01514 up, A150, 0430004-11-791 0430004-11-791 0430004-10-791 0430004-10-791 152, A152 $75.00 $75.00 $114.95 $114.95 172D and up, P172, 05-01515 05-01515 05-01517 05-01516 R172K 0532001-93-791 0532001-93-791 0532001-94-791 0532001-100-791 (172XP) $88.75 $88.75 $116.95 $116.95 172RG
---
----
Cessna flap gap speed kit consists of a gap seal on the lower flap gap that is an extension of the lower wing skin from the rear spar to the leading edge of the flap. The seal eliminate a high drag area plus reduce the amount of air leaking from the high pressure underside of the wing to the low pressure top side of the wing. The reduction in air leakage allows the wing to fly at a lower angle of attack for the same amount of lift, thus reducing drag. Please note it is NOT recommended to install a flap gap kit on those aircraft with wet wings because of the difficulty of resealing the wings to a gas leak free condition. This flap gap-kit is FAA STCd and manufactured under a FAA PMA authority. Also available is a hardware kit 114H containing enough hardware to install the flap gap kit. Kit No. Applicable to Cessna Models 114-200 150, 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, A150K, 150L, A150L, 150M, A150M 114-200 152, A152 114-100 170B 114-100 114-100 114-100 114-100 172, 172A, 172B, 172C, 172D, 172E, 172F, (USAF T-41A) 172G, 172H, (USAF T-41A), 172I, 172K, 172L, 172M, 172N, 172P, 172Q 175, 175A, 175B, 175C, P172D, R172E (USAF T-41B), (USAF T-41C &D), R172F (USAF T-41D), R172G (USAF T-41C or D), R172H (USAF T-41D), R172J, R172K Known as 172XP, 172RG 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 180J, 180K 182, 182A, 182B, 182C, 182D, 182E, 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R, R182, T182, T182R, TR182 Part No. 05-01622 05-01622 05-01620 05-01620 05-01620 05-01620 05-01620 Price $384.95 $384.95 $435.00 $435.00 $435.00 $435.00 $435.00
114-100 185, 185A, 185B, 185C, 185D, 185E, A185E, A185F 05-01620 $435.00 114-100 210-5 (205), 210-5A (205A) 05-01620 $435.00 114-100 210, 210A, 210B, 210C 05-01620 $435.00 Hardware kit 114H - To install the Flap Gap-Speed Kits above...................................... P/N 05-01621................................................................. $60.00
Cessna aileron gap kit consists of gap seals on the lower and upper aileron gaps that is an extension of the lower and upper wing skin from the rear spar to the leading edge of the aileron. The seals eliminate a high drag area plus reduce the amount of air leaking from the high pressure underside of the wing to the low pressure top side of the wing. The reduction in air leakage allows the wing to fly at a lower angle of attack for the same amount of lift, thus reducing drag. This aileron gap-speed kit is FAA STCd and manufactured under a FAA PMA authority. Also available is a hardware kit containing enough rivets to install the aileron gap kit. Cessna Models 150, A150, 152, A152, 170B, 172, 175, 180, 182, 185, 205 210 through 210C Aileron Gap Kit No. 05-01623 Price $198.95 Hardware Kit 05-01624 Price $21.00
214
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
05-01254 $149.95 05-01254 $149.95 05-01254 $149.95 05-01254 05-01254 05-01254 05-01254 05-01757 05-01254 05-01254 05-01254 05-01254 05-01254 05-01755 05-01755 05-01755 05-01755 05-01755 05-01755 05-02212 05-01755 05-01755 05-01747 05-01755 05-01755 05-01755 05-01755 05-02213 05-01755 05-01755 05-01755 05-01755 05-02213 05-02213 05-01757 05-01757 05-02213 05-02213 05-02212 05-02212 05-02212 05-02212 05-02212 05-02213 05-02213 05-01750 05-01750 05-01748 05-01748 05-01748 $149.95 $149.95 $149.95 $149.95 $508.00 $149.95 $149.95 $149.95 $149.95 $149.95 $185.95 $185.95 $185.95 $185.95 $185.95 $185.95 $119.95 $185.95 $185.95 $198.65 $185.95 $185.95 $185.95 $185.95 $119.95 $185.95 $185.95 $185.95 $185.95 $119.95 $119.95 $508.00 $508.00 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $122.95 $122.95 $159.95 $159.95 $159.95
PA-22, PA-22-108, PA-22-135 All PA-22S-135,PA-22All 150,PA-22S-150 PA-22-160, PA-22S-160 All PA-24-180 All PA-24-250 All PA-24-260 All with Carbureted Engine PA24-400 26-2 thru 26-148 PA-28-140 28-20002 thru 28-24999 PA-28-150, PA-28-160 28-1 thru 28-4377 PA-28S-160 28-1 thru 28-1760 PA-28-180, PA-28S-180 28-671 thru 28-4377 PA-28-235 28-10003 thru 28-11038 PA28-140 28-25000 thru 28-26956 PA28-140 28-7125001thru28-7725290 PA28-151 28-7415001thru28-7715314 PA28-161 28-7716002 thru 28-8616057 PA28-161 2816001 thru 2816110(Less2816066) PA28-161 Cadet 2841001 and On PA28-180 28-4378 thru 28-5152 PA28-180 28-5153 thru 28-5869 PA28-180 28-7105001 thru 28-7505261 PA28R-180 28R-30005 thru 28R-30481 PA28R-180 28R-30483 thru 28R-31279 PA28R-180 28R-7130001 thru 28R-7130019 PA28-181 28-7690001 thru 28-8290174 PA28-181 28-8390001 and On PA28-201T 28-7921001 thru 28-7921095 PA28R-200 28R-30482,28R-35001thru28R-35830 PA28R-200 28R-7135001 thru 28R-7635545 PA28R-201 28R-7737002 thru 28R-7837317 2837001 thru 2837061 PA28R-201 PA28R-201T 28R-7703002 thru 28R-7803372 PA28R-201T 2803001 thru 2803015 PA28RT-201 28R-7918001 thru 28R-8018116 PA28RT-201 28R-8118001 and On PA28RT-201T 28R-7931001 thru 28R-8031188 PA28RT-201T 28R-8131001 and On PA28-235 28-11040 thru 28-11393 PA28-235 28-7110001 thru 28-7210033 PA28-235 28-7310001 thru 28-7710089 PA28-236 28-7911001 thru 28-8211060 PA28-236 28-8311001 and On PA32-260 32-1111 thru 32-1320 PA32-260 32-7100001 thru 32-7800008 PA32-301T 32-8024001 thru 32-8424002 PA32-301T 32-8524001 and On PA32R-301T 32R-8029001 thru 32R-8229078 PA32R-301T 32R-8329001 and On PA32RT-300T 32R-7887001 thru 32R-7987146
FAA-PMA Approved Throttle Controls for aircraft manufactured by Grumman American, Gulfstream Aerospace Corp. or Tiger Aircraft LLC. McFarlane Aviation has developed a longer conduit terminal that allows extra clearance between the swivel joint and the air filter box at the clamp location.
215
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FAA/PMAD. Uncovered. Does not include glass. Replaces Piper P/N 51853-00. P/N 05-05035........... $379.95 FAA/PMAD. Uncovered, with pin. Includes handle and plunger. Does not include glass. Replaces Piper P/N 50173-00 P/N 05-05034 ............$487.95
FAA/PMAd LH Replaces Piper 41602-02 ... P/N 05-04978... $132.95 ea. RH Replaces Piper 41602-03 .. P/N 05-04979... $132.95 ea.
FAA/PMAd. Consists of two rear and front pedal assemblies. Replaces Piper P/N 40842-04 & 4084205 .................................. P/N 05-04980... $339.95 ea.
J-3 STEP
FAAPMAd. Includes all component parts listed below plus the PMAd header stacks. Fits all J-3 and homebuilts using A-65, A75, C85-8 and C90-8 engines without accessories. Uses treated aluminized mild steel stacks, including clamps. Complete System ........................................P/N 05-06461 ..... $1,275.00 Replacement system includes: Muffler.......................................................Replaces Piper P/N 71053-02 Tailpipe .....................................................Replaces Piper P/N 74501-00 Tailpipe Shroud ........................................Replaces Piper P/N 70912-00 Muffler Shroud ..........................................Replaces Piper P/N 70963-00 Muffler Clamps, two ..................................Replaces Piper P/N 70591-02 Tail Pipe Clamp ........................................Replaces Piper P/N 72691-00 Bracket .....................................................Replaces Piper P/N 70581-00 Stack, LH ..................................................Replaces Piper P/N 71082-00 Stack, RH .................................................Replaces Piper P/N 70671-00
FAA/PMAd. Exhaust stacks built to exact dimensions of J-3 header pipes of mild steel with long-life hot aluminized finish. Both Stacks .................................... P/N 05-04993 ..................... $472.95 LH Replaces Piper P/N 71082-00 .. P/N 05-04994 ..................... $248.95 RH Replaces Piper P/N 70671-00 .. P/N 05-04995 .................... $248.95
FAA/PMAd. Newly manufactured. Uncovered. Replaces Piper P/N 40643-00 P/N 05-05036 ................................. $506.00
FAA/PMAd. J-3, 4, 5, & PA-15, 17, PA-22 TriPacer & Colt Styles, PA-28-140 Cherokee Style. Also suitable for use on Lycoming powered homebuilts 108 hp thru 150 hp. 2 required for full system. Sold as each. Replaces Piper P/N 70591-02................ P/N 05-04985 ...........$31.75
FAA/PMAd. for full system-J-3, 4, 5, & PA-12, 14, 15, 16, 17, PA-18 Super Cub, PA-22 TriPacer & Colt Styles, PA- 28-140 Cherokee Styles. Also suitable for use on Lycoming powered homebuilts 108 hp thru 150 hp. 1 required. Sold as each. Replaces Piper P/N 72691-00 P/N 05-05253...........$23.95
FAA/PMAd. Uncovered. Replaces Piper P/N 41313-00 P/N 05-05037 ................................. $476.95
216
CM WP ME HA AP LG EP
FAA/PMAd. Includes fire wall and windshield frame. Replaces Piper P/N 23993-00 P/N 05-05013............$533.00
FAA/PMAd. Equipped with metal spar, LH or RH. Replaces Several Piper P/Ns P/N 05-05041 .......................................$291.95
FAA/PMAd. Replaces Piper P/N 23942-00 & 23952-00 P/N 05-05014 ................................. $105.95
FAA/PMAd. Used as replacement for damaged original. Fabricated of heavier material and completely heliarc welded for added strength. Replaces Piper P/N 00032-64 P/N 05-05063 ................................. $543.00
Bracket Assembly. FAA/PMAd. LH Replaces Piper P/N 21442-02 P/N 05-05045..............$95.00 RH Replaces Piper P/N 21442-03 P/N 05-05046..............$82.75
FAA/PMAd. Front with pitot tube Replaces Piper P/N 12931-00 .................. P/N 05-05067............$141.95 FAA/PMAd. Front w/o pitot tube Replaces Piper P/N 12571-02 .................. P/N 05-05068............$130.95 FAA/PMAd. Rear Replaces Piper P/N 12571-03 .................. P/N 05-05071............$105.95 FAA/PMAd. Jury Strut Fittings (Set of 4) Replaces Piper P/N 12581-00 .................. P/N 05-05069..............$72.25 FAA/PMAd. Jury Strut Innerconnect Replaces Piper P/N 12591-00 .................. P/N M-05-05070 .........$59.75
CS IN EL AV TO PS BV
FAA/PMAd. For wood spar wing only. Front and rear. Replaces Piper P/N 12801-00 & 12791-00 ....... P/N 05-05076............$141.95
FAA/PMAd. Completely fabricated. Ready to install landing gear with 1-1/4 axle. LH - Replaces Piper P/N 10033-00 P/N 05-05005............$534.00 RH - Replaces Piper P/N 10033-01 P/N 05-05006............$534.00
FAA/PMAd. Sold as a pair. Replaces Piper P/N 31073-00 ..................... P/N 05-05008..............$34.75
FAA/PMAd. For use with metal ribs only. Replaces Piper P/N 15572-00 & 15572-01 .. P/N 05-05079 ................................ $78.25
FAA/PMAd. J-3 Series s/n 2315 to s/n 8277 except s/n 2316, 2332 & 2353. Uses 1/4 bolt. Replaces Piper P/N 21-09 P/N 05-05009............$215.95 FAA/PMAd. J-3 Series s/n 8278 & up, uses 5/16 bolt. Replaces Piper P/N 30602-00 ........................................... P/N 05-05010............$237.95 M-100-000 M-101-000
FAA/PMAd. Kit consists of 6 pcs. of 3, 4 pcs. of 18 and 5pcs. of 20 long material to properly repair main and nose ribs and uprights for Piper style ribs. Replaces Many Piper P/ Ns .................. P/N 05-05043..............$99.75
FAA/PMAd. Fits both J-3 s/n 8278 and up, and L4 series. 15 length. Replaces Piper P/N 31392-00........... P/N 05-05011............$210.95
FAA/PMAd. Fits both J-3 s/n 8278 and up, and L4 series. 25 Length. Replaces Piper P/N 31382-00 .................. P/N 05-05012............$193.95
217
CM
FAA/PMAd. Fits J-3 & PA-11 aircraft. Uses control cable. Replaces Piper P/N 40901-02 ....................................... P/N 05-05074...........$283.95
WP ME HA
FAA/PMAd Replaces Piper P/N 60571-00 & 60571-01 P/N 05-05078 ........................................ $39.00
FAA/PMAd. Provides a source of ram air for both cabin and carb heat shrouds. 2 diameter. Replaces Piper P/N 72522-00 P/N 05-05044............$148.95
J-3 CONTROL STICK TORQUE TUBE ASSEMBLIES J-3 FRONT SEAT FRAME ASSEMBLY
FAA/PMAd. Replace your worn J-3 unit with a newly manufactured unit. Replaces Piper P/N 40223-00 .................. P/N 05-05004...........$608.00
AP LG EP CS IN EL AV TO PS BV
FAA/PMAd. Exact reproduction of J-3 throttle plate with imprinted wording. High quality, unpainted. Ideal for most light aircraft. Replaces Piper P/N 41501-00 ...................................... P/N 05-05081..............$36.00
FAA/PMAd. Exact copy of original J-3. Increase cabin heat by 70%. Now fly comfortably in the dead of winter. Attaches to LH heater manifold. Shipped complete with heater collector shroud, aeroduct tubing, and firewall airbox coupling. PMAd as modification part. Three pieces. P/N 05-04988............$221.95
FAA/PMAd. Exact replacement, aluminum. Ideal for most homebuilts.12 gal. tank, 17-1/2L x 13W x14-1/2H. Uses a CAV-110-H-4 drain valve, not included. Replaces Piper P/N 70723-00 ............................. P/N 05-04984............$513.00
FAA/PMAd. Use with Cont. engines. Has 7/16 bolt hole and requires our bushings. Replaces Piper P/N 71163-00 P/N 05-05007............$566.00
Kit includes mounting brackets, installation instructions and STC paperwork. Requires a gas cap, a 2-way shut-off valve and 3/8 x 1/4 brass fuel strainer which are not included. 11-1/2 Gallon Kit LH Wood Spar .......................................... P/N 05-04989............$624.00 RH Wood Spar ......................................... P/N 05-04991............$623.00 11-1/2 Gallon Kit LH Metal Spar........................................... P/N 05-04990............$623.00 RH Metal Spar .......................................... P/N 05-06839............$612.00
FAA/PMAd. For main fuel tank applications. Includes one each listed below and felt padding 180-150 .......................... P/N 05-06463..............$95.84 Front Upper .............................................. Replaces Piper P/N 70462-00 Front Lower .............................................. Replaces Piper P/N 70451-03 Rear Upper ............................................... Replaces Piper P/N 70472-00 Rear Lower ............................................... Replaces Piper P/N 70451-02
FAA/PMAd. LH Fairing Set Includes one each LH Wing Root Fairing, LH Fairing Top, LH Rear Fairing Bottom and LH Front Fairing Bottom. See Replacement Piper P/Ns Below ........................................................ P/N 05-05020............$164.95 FAA/PMAd. RH Fairing Set Includes one each RH Wing Root Fairing, RH Fairing Top, RH Rear Fairing Bottom and RH Front Fairing Bottom. See Replacement Piper P/Ns Below ....................................................... P/N 05-05021............$164.95 FAA/PMAd. Wing Root Fairing LH Replaces Piper P/N 60803-00 ............ P/N 05-05023..............$41.25 RH Replaces Piper P/N 60803-01 ........... P/N 05-05024..............$41.25 FAA/PMAd. Fairing Top LH Replaces Piper P/N 60772-00 ........... P/N 05-05025..............$42.75 RH Replaces Piper P/N 60702-01 ............ P/N 05-05026..............$42.75 FAA/PMAd. Rear Fairing Bottom LH Replaces Piper P/N 60782-00 ............ P/N 05-05027..............$35.75 RH Replaces Piper P/N 60782-01 ............ P/N 05-05028..............$35.75 FAA/PMAd. Front Fairing Bottom LH Replaces Piper P/N 60792-00 ............ P/N 05-05029..............$38.75 RH Replaces Piper P/N 60872-00 ............ P/N 05-05030..............$38.75
218
CM WP
ME HA AP LG
FAA/PMAd Metal, unpainted. Sold as a Set of 2 Replaces Piper P/N 60742-00 & 6074201 ................... P/N 05-05039..............$58.75
FAA/PMAd. Replaces Piper P/N 72911-00 P/N 05-05059..............$52.25 Front $169.95 Rear $193.95 Black ................................................. 13-00913-1.................. 13-00914-1 Navy ................................................. 13-00913-2.................. 13-00914-2 Brown ............................................... 13-00913-3.................. 13-00914-3 Royal Blue ........................................ 13-00913-4.................. 13-00914-4 Red ................................................... 13-00913-5.................. 13-00914-5 Tan ................................................... 13-00913-6.................. 13-00914-6 Olive Green ...................................... 13-00913-7.................. 13-00914-7 Silver Gray ........................................ 13-00913-8.................. 13-00914-8
FAA/PMAd Sold as a set of 2. Replaces Piper P/N 72651-00 & 72571-00 P/N 05-05060............$148.95
EP CS IN EL AV TO PS BV
Exact reproduction of the original. Raised metal lettering requires painting. 6-1/8 x 1-1/2. Replaces Piper P/N 480 921 P/N 05-04996 ................................ $24.25
Nose Up/Down markings need to be applied to plate. Replaces Piper P/N 41131-00 P/N 05-05040..............$29.25
FAA/PMAd. with Cutouts Five holes each of 3-1/8 dia. Replaces Piper P/N 00024-94 P/N 05-05018 ......................$61.00
It is a tedious and time consuming job to research the part manuals for all of the cables required for a complete aircraft. You not only gain tremendous time savings with McFarlane cable kits, you receive substantial price discounts. All components are fully traceable, high quality, and proof tested. See our website for a detailed list of kit components. PCKT200-03 Flight Control Cable Kit ........P/N 05-04629 ....... $1,880.34 PCKT200-07 Flight Control Cable Kit ........P/N 05-04630 ....... $1,896.07 PCKT200-04 Flight Control Cable Kit ........P/N 05-04631 ....... $1,896.07 PCKT200-08 Flight Control Cable Kit ........P/N 05-04632 ....... $1,911.77 PCKT200T-01 Flight Control Cable Kit......P/N 05-04633 ....... $1,569.04 PCKT200T-02 Flight Control Cable Kit......P/N 05-04634 ....... $1,584.76 PCKT200T-03 Flight Control Cable Kit......P/N 05-04635 ....... $1,553.33 PCKT200T-04 Flight Control Cable Kit......P/N 05-04636 ....... $1,569.04 PCKT220T-01 Flight Control Cable Kit......P/N 05-04637 ....... $1,563.35
FAA/PMAd. Blank instrument panel for Piper. Replaces Piper P/N 54703-00 .. P/N 05-05019..............$50.25
Torque Link Repair Kits for Piper Aircraft. Solves many wheel shimmy problems. Save up to 60%. Features: Convenient kits replace all common wear torque link components. Fits most prop driven Piper aircraft. Contains all FAA approved parts and standard hardware. Save time and money! No more research and ordering of individual parts.
FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade like the origional Buna N seals. All seals may be purchased seperately, or in convenient kits containing both the upper and lower seal for one fuel strainer.
Model No. FSP-KT-1 FSP-KT-2 FSP-KT-3 FSP-KT-4 MC751-882 MC753-205 MC757-255 MC751-898 CA751-871 MS29513-008 MS29513-043 Description Fuel Gasket Kit Fuel Gasket Kit Fuel Gasket Kit Fuel Gasket Kit Gasket, Upper Seal Gasket, Lower Seal O-Ring, Upper Seal Gasket, Lower Seal Gasket, Fuel Strainer O-Ring O-Ring Spruce Part No. 05-06821 05-06822 05-06823 05-06824 05-06825 05-06826 05-06827 05-06828 05-06829 05-00126 05-06830 Price $17.50 $12.50 $14.29 $9.50 $6.50 $11.25 $6.25 $8.75 $10.50 $0.24 $9.80
219
PIPER PARTS
CM WP
PA 20-22 PA 18
These durable ribs are direct replacements for the original style Truss type ribs originally used by Piper. These ribs are designed for the various modes of Piper including J-3 and PA-18 with metal spars. The ribs listed are the more commonly requested ribs for this series. Description Part No. Replaces Price Nose Rib.............................. 05-07365 ........... 12662-002 .......... $23.50 Nose Rib, Tip L/H ................ 05-07370 ........... 16192-000 .......... $24.85 Nose Rib, Tip R/H ............... 05-07375 ........... 16192-001 .......... $23.25 Full Rib ................................ 05-07380 ........... 13052-002 .......... $94.50 Full Butt Rib, L/H ................. 05-07385 ........... 10634-000 ........ $109.95 Full Butt Rib, R/H ................ 05-07390 ........... 10634-008 ........ $105.95 Full Tank Bay Rib, L/H ........ 05-07395 ........... 10653-000 .......... $97.50 Full Tank Bay Rib, R/H........ 05-07405 ........... 10653-006 ........ $100.00 Full I.B. Ail. Bay, L/H ........... 05-07410 ........... 13042-000 ........ $109.95 Full I.B. Ail. Bay, R/H........... 05-07415 ........... 13042-001 .......... $99.75 Full O.B. Ail. Bay, L/H ......... 05-07420 ........... 12902-000 .......... $93.75 Full O.B. Ail. Bay, R/H ......... 05-07425 ........... 12902-001 .......... $90.75 3/4 Rib ................................. 05-07430 ........... 13022-002 .......... $74.75 3/4 Butt Rib, L/H .................. 05-07435 ........... 10634-005 .......... $80.75 3/4 Butt Rib, R/H ................. 05-07440 ........... 10634-007 .......... $81.25 3/4 Tank Bay Rib................. 05-02397 ........... 10635-002 .......... $79.00
ME HA AP LG EP CS IN EL AV TO PS BV
Description P/N Price PA-11, For cowls using screws ............................. 05-07295......$906.00 PA-11, For cowls using Lion fasteners ................. 05-07305......$861.00 J-3 Eyebrow baffle LH ........................................... 05-00061......$418.00 J-3 Eyebrow baffle RH .......................................... 05-00062......$386.95 Front piece for Top cowl........................................ 05-00063......$307.75 Top cowl for J-3..................................................... 05-00064......$485.89 Bottom cowl for Continental powered J-3 ............. 05-00065......$529.50 Front piece for bottom cowl ................................... 05-00066......$374.95 Fuselage cowl ....................................................... 05-00067......$435.63 Top cowl for PA-11................................................ 05-00068......$132.95 Bottom cowl for PA-11 .......................................... 05-00069......$230.95 Side cowl for PA-11LH .......................................... 05-00071......$278.95 Side cowl for PA-11 RH ....................................... 05-00072......$278.95
PA-12
Bottom cowl ........................................................... 05-00078......$223.26 Top cowl ................................................................ 05-00079......$133.96 Fuselage cowl ....................................................... 05-00081......$732.00 Left side cowl......................................................... 05-00082......$302.95 Right side cowl ...................................................... 05-00083......$302.95
PA-12 & 14
Nose cowl for all serial numbers ........................... 05-07310......$890.33
(U86062-080) ................... P/N 05-07450.......... $88.70 Rear Liner Tube (U86062-079) ................... P/N 05-07455.......... $56.00
Yoke .....................................P/N 05-07465 ..... $198.50 Adjustment Screw ................P/N 05-07470 ....... $82.00
MCFARLANE CA452-538 PIPER STABILATOR BEARING WING NAVIGATION LIGHT BRACKET ENGINE MOUNTS
For use with Grimes Model E Type Light or equivalent ... P/N 05-07460 ................... $75.75 J-3 Continental Mount........ P/N 05-00873.......... $550.00 PA-11 Mount ...................... P/N 05-00874.......... $483.95
For years Piper PA28 and PA32 owners have been plagued with a Heater Temperature Control that will not stay positioned. This Heater Temperature Control Lock that can be installed in minutes and provides a positive adjustable lock for the Heater Control Lever. P/N 08-04939 .......... $75.75
220
PIPER PARTS
(FAA/PMA APPROVED) COMMON PIPER GROMMETS SPINNER ASSEMBLIES & COMPONENTS
CM WP
Short Spinner Assembly for Piper Models PA-12, PA-16, PA-18, PA-20 & PA-22 with O-235 or O-290 engines with AM series Sensenich propellers. Spinner Dome .........................................P/N 05-07670 ............$246.95 Front Plate ...............................................P/N 05-07675 ............$119.50 Back Plate ...............................................P/N 05-07680 ..............$93.75 Complete Assembly ................................P/N 05-07685 ............$449.00 PA-25 Spinner Components Assembly for Fixed Pitch Propellers serial numbers 2986-3691 Back Plate ..............................................P/N 05-07695 ............$148.95 Front Plate ..............................................P/N 05-07705 ............$118.75 Complete Assembly ...............................P/N 05-07710 ............$525.00 Spinner Components for 235 hp. with FA8452 McCauley Propeller. Dome Only .............................................P/N 05-07715 ............$376.95 Back Plate ..............................................P/N 05-07720 ............$202.95 Front Plate ..............................................P/N 05-07725 ............$163.95 Spinner Assembly for PA-18/18A, 150 hp.For Dm Series Propellers. Spinner Dome ........................................P/N 05-07730 ............$272.95 Front Plate ..............................................P/N 05-07735 ............ $109.95 Back Plate ...............................................P/N 05-07740 ............ $165.95 Complete Assembly ...............................P/N 05-07745... ..........$484.00
1) 2) 3) 4) 5)
Grommet, Tail ................................ P/N 05-07750 ......................$9.90 Grommet ........................................ P/N 05-07755 ................... $14.75 Grommet ........................................ P/N 05-07765 ..................... $3.80 Grommet ........................................ P/N 05-07770 ..................... $4.85 Grommet, Inspection Plate (original Piper type: 80122-49) P/N 05-07775 ..................... $6.75 6) Grommet, Strut............................... P/N 05-07780 ..................... $6.50
ME HA AP LG
7) Grommet, Tail (used on PA-25 and later PA-18s) P/N 05-07785 ................... $24.45 8) Grommet, Tail ................................ P/N 05-07790 ..................... $7.95 9) Grommet, Cover............................. P/N 05-07795 ..................... $9.75 10) Grommet, Pulley Cover................ P/N 05-07800 ..................... $8.75
EP CS IN
EL AV TO PS BV
This J-3 fuel valve includes a steel handle for use with the original pushpull shut off control. this valve is a significant improvement over the original brass style fuel valve. The new valve has a stainless steel ball seated in an inert composite seat. This improved design eliminates the stiff operation and leaking around the shaft that the original design was prone to. PMA approved. P/N 05-00848 ................. $141.95 FAA approved replacement throttle control. P/N 05-03397....................... $372.95
221
PIPER PARTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Heavy Duty Muffler STC/PMA P/N 05-03475 ............ $666.00
Pre-heat shroud PA-18 STC/PMA P/N 05-03457 ..................................$238.95 Front: 05-03468 Rear: 05-03469 PA-18, PA19 STC Heater Tanks - Front ...05-03468 ... $315.95 Heater tanks - Rear .....05-03469 ... $290.95 Due to normal wear and lack of lube, the door hinge clevis pins should be replaced from time to time to maintain the proper operation of the doors. The set includes 2 clevis pins, 6 washers, and 2 cotter keys. All the hardware is FAA approved for all Piper aircraft. P/N 05-03633 .................$9.90 The eyebolts are probably the most neglected parts on the plane. They hardly ever get lubricated and due to their exposure to the elements, rust in the pivot point can prevent the door from closing properly and should be replaced from time to time as they wear. The set contains two of the proper eyebolts and detailed installation instructions. The hardware is FAA approved for all Piper aircraft. Rear Door ..............................................P/N 05-03636 ...............$26.95 Front Door .............................................P/N 05-03635 ...............$35.70 Folding Jump Seats - 170, 172, 172S, 175, 180, 180K, 182, 182R, 185, A185F STC/PMA
HEADER TANKS
Piper no longer produces the trim handle, and an estimated 10% of 31,000 Pipers on the registry which utilize their handles. The OEM handles are a very weak link in the entire door assembly. Everything downstream of the handle is pretty secure. Therefore, Overhead Trim Door Replacement Replacement Handles they have improved the handle and Handles are STC'd and PMA'd for certified aircraft. Please call or visit our website for model eligibility. Each replacement handle is sold as a complete assembly and everything required to complete the installation. Piper Cabin Door Replacement Handle .......... P/N 05-04550 .....$208.00 Piper overhead Trim Replacement Handle ..... P/N 05-04551 .....$208.00 Vented Fuel Caps J3 thru PA-22 STC . P/N 05-03459 ............................ $58.85
180 Fuel Cap PA-12 thru PA-18 with 180HP Engine. P/N 05-03458 .......................... $98.75
REFUELING STEP
Description Folding Jump Seats - right hand pair Folding Jump Seats left & right hand pair
Main landing gear Long Step J3 thru PA19 STC P/N 05-03461 ................................ $216.95
Seat Track Tie Downs - Aircraft equipped with Cessna or McFarlane Seat rails. P/N 05-03467 .................$73.85
Weld on aircrat float fittings PA-12, -14, PN 0503476 PA-18 PN 05-03477 STC Float Fittings PA-12/14 P/N 05-03476 ................... $715.00 Float Fittings PA-18 P/N 05-03477 ................... $556.00
05-04476 COWL BUSHING R-RING MC69790-00 Material that outlasts the original nylon or glass filled teflon materials. Used on most 05-01764 Piper Cherokee models. Includes the retaining ring (snap ring) . P/N 05-01764..................... $16.50 COWL PLATE ASSEMBLY MC69791-000 - Stainless steel mounting plate with MC69790-00 teflon glass bushing and MC484-840 retaining ring. Upper cowl retaining part for most Piper Cherokee models. P/N 05-04476......................... $32.75 Restore solid latching of the doors to the fuselage Due to normal wear and lack of lube, the door latch clevis pin should be replaced from time to time to maintain the proper operation of the door. The set includes 1 clevis pin and 1 cotter key. All the hardware is FAA approved for all Piper aircraft. P/N 05-04644 ........................$5.50
Main Landing Gear Safety Cables (All STC) Standard Gear J-3, PA-11, PA-18, PA-19.................................... PN 05-03463 .................... $187.95 3 Extension Gear............................. PN 05-03464 .................... $220.95 Standard Gear PA-12, PA-14 ........... PN 05-03465 .................... $189.95 3 Extended Gear PA-12, PA-14 ...... PN 05-03466 .................... $220.95
Piper Eligibility PA-28-140,-150, -160, -180, -235; PA-28R-180,-200,-201,-201T; PA-28-181, -236, -201T; PA-28-181,-236, -201T; PA-32-260, -300; PA-32R-300; PA-32RT-300, -300T; PA-34-200 P/N 05-04197 ...... $89.75 ea. New Manufactured, FAA/PMA Approved, Stainless Steel Original Design, Exhaust Headers and Muffler with Safety Bail already installed. 1-Left exhaust stack ...........P/N 05-07475 ..$497.95 2- Right exhaust stack .......P/N 05-07480 ..$543.00 3- Muffler assy, less shroud.....P/N 05-07485 ..$573.49 4- Tailpipe ...........................................................P/N 05-07490 ..$187.95 5- Tailpipe Shroud ..............................................P/N 05-07495 ..$165.95 6- Muffler Shroud ................................................P/N 05-07505 ..$352.95 7- Slide Clip ........................................................P/N 05-07510 ....$38.90 8- Muffler stack connecting clamp (2 req.) .........P/N 05-07515 ....$26.25 9- Tailpipe brace clamp ......................................P/N 05-07520 ....$29.75 10- Muffler clamp ................................................P/N 05-07525 ....$19.85
222
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Constructed using all square tubing. FAA approved. P/N 05-00459 .................................... $546.00
Latching mechanism greatly improved over original. Utilizes push rods instead of wires. Powder coated. P/N 05-00460 .................................... $527.00 Bushings installed, powder coated and ready to cover. FAA-PMA approved. P/N 05-00461 .................................... $408.95
PA18 STABILIZER
FAA-PMA - complies with all A.D.s - high strength struts will not fail under wind or snow loads. $20 CRATE CHARGE FOR LIFT STRUTS Description Part Number Price PA 18 Front Lift Strut 05-00485 $499.00 PA 18 Heavy Duty Rear Lift Strut 05-00486 $546.00 PA 12-14 Front Lift Strut 05-00487 $497.00 PA 12-14 High Strength Rear Lift Strut 05-00488 $497.00 PA18 Rear Lift Strut 05-03868 $516.00 J-3 Front Strut 05-04931 $525.00 J-3 Rear Strut 05-04932 $525.00
Bushings installed, powder coated and ready to cover. FAA-PMA approved. P/N 05-00462 .......................... $429.00
PA18 ELEVATOR
Complete set of 6 turtle deck arches precut to correct size, weld on as is. FAA-PMA P/N 04-00469 ............................... per set $252.95
Bushings installed, powder coated and ready to cover. FAA-PMA approved. P/N 05-00463 .................................... $409.00
PA18 RUDDER
Weld on, FAA-PMA approved. Front left side......................P/N Front right side ...................P/N Rear left side ......................P/N Rear right side ....................P/N
PA 18 WING FITTINGS
05-00470 ........... $69.00 05-00471 ........... $66.25 05-00472 ........... $29.52 05-00473 ........... $28.25
Bushings installed, powder coated and ready to cover. FAA-PMA approved. P/N 05-00464 .......................... $347.95 $10 crate charge for all items above
Weld on, FAA-PMA approved. Left side ..........................P/N 05-00474 ......... $145.95 Right side .......................P/N 05-00475 ......... $268.95
Bushings installed, powder coated and ready to cover. FAA-PMA approved. P/N 05-00465 ............................ $70.50
PA18 TAILPOST
Weld on, FAA-PMA approved. Fits right or left side. P/N 05-00476 ......... $122.95
For fabric wing piper models, powder coated. FAA-PMA approved. P/N 05-00480 ............................ $54.25
FLAP HINGE-OUTBOARD
Weld-on float fitting for all models Piper Supercub, PA18. FAA approved by STC. Weighs less than similar fittings. $486.95 for a pair. P/N 05-02529.........$486.95
Oversized lifting handle can be used with winter gloves, 8 long with 2 clearance. Weld on, FAA-PMA approved. P/N 05-00477 ........... $31.75
PA 18 FUSELAGE HANDLE
05-07560 $1,159.00
For fabric wing piper models. Powder coated. FAAPMA approved. P/N 05-00478 ........... $51.25
AILERON HINGE
223
HA AP LG EP CS IN EL AV TO PS BV
Muffler Bail Welded inside muffler out let to guard against Flame Tube failure and obstruction of exhaust outlet. P/N 05-02150 ........................... $35.50
Without Jack screw tower. P/N 05-00504 ...................... $1,724.00 With Jack screw tower P/N 05-00505 ...................... $1,040.91 $20 CRATE FEE
New Stewart Warner fuel quantity transmitters have not been available for over 20 years, but we now have new FAA-PMA approved direct replacements for originally installed Stewart Warner type transmitters. They eliminate the need for expensive transmitter conversion kits that require replacement of fuel gauges and wiring. These fuel quantity transmitters are engineered to be compatible with the original fuel quantity gauge and wiring which uses reliable time proven technology. Convenient Kits FAA-PMA approved kits include one transmitter, one no leak Viton gaskets and five screw/seal assemblies. MC68101-02 .......................................P/N Accessories GASKET MC461-931 .........................P/N GASKET MC462-021 .........................P/N SCREW SEAL ASSY MC1802 ...........P/N 05-04870 ........ $244.00 05-04871 .......... $10.85 05-04872 ............ $7.35 05-04873 ............ $3.80
224
LUSCOMBE PARTS
(FAA/PMA APPROVED) LUSCOMBE 8E & 8F EXHAUST STACKS
CM WP ME
Complete Assembly ....................................P/N 06-14600 ........ $139.95 Main Leaf Only ............................................P/N 06-14700 .......... $46.85
Left Hand Exhaust Stack.............................P/N 05-07805 ........ $323.95 Right Hand Exhaust Stack ..........................P/N 05-07810 ........ $286.95
HA AP LG
EP CS IN
Left Hand Jack Strut (1) ..................... P/N Right Hand Jack Strut (1) ................... P/N Fork End (S-9) (2) .............................. P/N Left Hand Lower Leg (3) .................... P/N Right Hand Lower Leg (3) .................. P/N Left Hand Upper Arm (4) .................... P/N Right Hand Upper Arm (4) ................. P/N Tie Rod without fittings, 361/4 long (5) P/N Left Hand Jack Strut (Silflex).............. P/N Right Hand Gear Fairing .................... P/N
05-07885 ................ $429.00 05-07890 ................ $425.95 05-07895 .................. $54.75 05-07900 ................ $814.00 05-07905 ................ $808.00 05-07910 ................ $995.00 05-07915 ............. $1,075.86 05-07920 .................. $94.50 05-07930 ................ $418.95 05-07935 ................ $299.75
EL AV TO PS BV
Left hand aileron................................. P/N Right hand aileron .............................. P/N Left hand lift strut (metal wing) ........... P/N Right hand lift strut (metal wing) ........ P/N Carry-thru spar (front or rear) ............. P/N
05-00452 ............. $2,337.00 05-00453 ............. $2,576.44 05-00454 ............. $1,577.00 05-00455 ............. $1,590.00 05-00456 ................ $304.95
Fitting P/N 05-07985 .................. $171.40 Note: This fitting is welded 4130 steel and complies with all provisions of A.D. 79-25-05. This fitting is required only on those Luscombes with the round tip vertical stabilizer.
Fin, square tip..................................... P/N 05-07940 ............. $1,693.00 Rudder, square tip .............................. P/N 05-07945 ............. $1,078.00 Rudder Horn for square tip rudder ..... P/N 05-07950 .................. $75.90 Tailwheel Leaf Spring Assembly ........ P/N 06-14600 ................ $139.95 Main Leaf only .................................... P/N 06-14700 .................. $46.85 Rudder & Elevator Hinge Pin ............. P/N 05-07970 .................. $25.75 Rudder & Elevator Hinge Pin Bracket P/N 05-07975 .................. $15.50
225
LUSCOMBE PARTS
(FAA/PMA APPROVED)
CM WP ME HA AP LG EP CS IN EL AV TO
CONTROL CABLES
Nose Cowl ..................................... P/N Bottom Cowl .................................. P/N Top Cowl ....................................... P/N L/H Cowl ........................................ P/N R/H Cowl ....................................... P/N 05-07990....................$1,117.00 05-07995.......................$599.50 05-08000.......................$258.60 05-08005.......................$124.75 05-08010.......................$124.75
(GALVANIZED)
Note: Cowling is trimmed oversize requiring a finish trim for each individual airplane.
FIREWALL DISHPAN
Used on Luscombe with an electrical system. P/N 05-08015 .........$406.95
Brake Cable Assembly ............................P/N 05-08035 ............... $61.95 Elevator Cable, SN 1-4199 .....................P/N 05-08040 ............. $106.32 Elevator Cable, SN 4200 and up ............P/N 05-08045 ............. $111.95 Left Hand Rudder Cable .........................P/N 05-08050 ............. $103.49 Right Hand Rudder Cable .......................P/N 05-08055 ............. $103.49 Stick to Aileron Cable ..............................P/N 05-08065 ............. $120.82 Left Hand or Right Hand Aileron Balance Cable. 16 ft., 7/8 in. ......................................P/N 05-08070 ............... $97.32 Left Hand or Right Hand Aileron Balance Cable. 15 ft., 10-3/4 in..................................P/N 05-08075 ............... $91.25 Forward Trim Cable.................................P/N 05-08080 ............. $101.95 Aft Trim Cable Assembly (2 reqd) ..........P/N 05-08085 ............... $81.01
8A EXHAUST COMPONENTS
FITS ALL A-65 CONTINENTAL ENGINES
MANUALS
PS BV
8A Owners Manual P/N 13-00230 ............ $4.65 8E Owners Manual P/N 13-00235 ............ $4.40 8 Series Master Parts List, illustrated P/N 13-00240 .......... $18.50 Service Manual, early fabric wings P/N 13-00245 ............ $8.95
226
STINSON PARTS
(TYPE CERTIFICATE APPROVED) EXHAUST SYSTEM FUEL GAUGE & SENDER
DIRECT REPLACEMENT FOR ORIGINAL AC GAUGE AND SENDER
CM WP ME
Muffler SN 1-3109 .............................. P/N 05-08120 ............$747.00 SN 3110 and up ..................... P/N 05-08125 ............$747.00 Perforated Tube SN 1-3109 .............................. P/N 05-08130 ............$202.95 Perforated Tube SN 3110 and up ..................... P/N 05-08135 ............$200.06 Tailpipe, Left Hand SN 112-3109 .......................... P/N 05-08140 ............$271.95 SN 3110 and up ..................... P/N 05-08145 ............$266.95 Tailpipe, Right Hand Gauge ....................................P/N 05-08200 ...............................$148.95 Sender ...................................P/N 05-08205 ...............................$265.95
HA AP LG EP
For Franklin 150-165 hp. Stinson 108 Series ............. P/N 05-08215............$77.85 Leading Edge Slat for all 108 Series............... P/N 05-08220.....$352.95 Leading Light Lens .......................................... P/N 05-08225.......$44.75
SN 112-3109 ....................... P/N 05-08150 .......... $288.95 SN 3110 and up .................. P/N 05-08155 .......... $252.95
RUDDER ARM
CS IN
Carb. Heat Shroud .................................... P/N 05-08165 ...$313.95 Cabin Heat Shroud, For SN 744 & up ...... P/N 05-08170 ....$232.95 Shroud Clip................................................ P/N 05-08175 ..... $48.50
Wood Propeller Spinner Assembly ........... P/N 05-08180..........$499.00 Metal Propeller Spinner Assembly ............ P/N 05-08185..........$556.59
For 108, 108-1, 108-2, 150 hp. (SN 1-2249) P/N 05-08190 ............$118.95 For 108-2, 108-3, 165 hp. (SN 1-2249) P/N 05-08195 ............$119.95
108 Series Parts Catalog P/N 05-08230 ...........$19.75 General Service Manual P/N 05-08235 ...........$38.50 Service Bulletins and Letters P/N 05-08240 ...........$19.50 Stinson Specs, ADs and STCs P/N 05-08245 .............$8.75 108 CAA Operating Limits P/N 05-08250 .............$4.85 108-1 CAA Operating Limits P/N 05-08255 .............$6.85 108-2 CAA Operating Limits P/N 05-08265 .............$4.90 108-3 CAA Operating Limits ....................... P/N 05-08270 .............$5.25 108-1 Owners Manual ................................ P/N 05-08275 ...........$11.95 108-2 Owners Manual ................................ P/N 05-08280 ...........$12.50 108-3 Owners Manual ................................ P/N 05-08285 ...........$11.85 108-1 Seaplane Operating Limits................ P/N 05-08290 .............$4.85 108-2 Seaplane Operating Limits................ P/N 05-08295 .............$4.85 108-3 Seaplane Operating Limits................ P/N 05-08300 .............$5.50 108 Ski-Plane Supplement .......................... P/N 05-08305 .............$1.63 108-1 Ski-Plane Supplement....................... P/N 05-08310 .............$1.66 Appendix A Supplement .............................. P/N 05-08315 .............$1.51 Stinson Story of Aircraft Progress ............... P/N 05-08320 ...........$17.50 Stinson Time-Speed-Distance Computer .... P/N 05-08325 .............$9.85 Stinson Computer Instructions .................... P/N 05-08330 .............$5.50
STINSON MANUALS
EL AV TO PS BV
227
STINSON PARTS
(TYPE CERTIFICATE APPROVED)
CM WP ME
PITOT TUBE
HA AP LG EP CS IN EL AV TO PS BV
Applicable to 108 through 108-3 series Stinsons. Nose Cowl ................................. P/N 05-08335 ................. $939.00 Bottom Cowl .............................. P/N 05-00086 .............. $1,639.00 Left side Cowl ............................ P/N 05-00087 ................. $739.00 Right side Cowl .......................... P/N 05-00088 ................. $740.00
Left Fairing ................ P/N 05-08340.....$225.61 Right Fairing ............. P/N 05-08345.....$225.61
Cowl Fastener Assembly........................ P/N Cowl Fastener Pin .................................. P/N Cowl Fastener Receptacle ..................... P/N Receptacle Cup ...................................... P/N
Description No. Reqd P/N Price Aileron Idler Cable ..............................2...........P/N 05-08405 ......$85.75 Aileron Control Cable .........................2...........P/N 05-08410 ......$79.50 Flap Control Cable .............................2...........P/N 05-08415 ......$73.25 Rudder Cable1946, 1947................2...........P/N 05-08420 ......$95.00 Rudder Cable, 1948 ...........................2...........P/N 05-08425 ....$121.95 Aileron Idler Cable (in fuselage) .........1...........P/N 05-08430 ......$51.85 Control Column Cable, Left Half ........1...........P/N 05-08435 ....$102.95 Control Column Cable, Right Half ......1...........P/N 05-08440 ....$102.95 Up Elevator Cable ............................1...........P/N 05-08445 ......$76.50 Down Elevator Cable .......................1...........P/N 05-08450 ......$76.50 Upper Flap Control Cable (in fuselage) 1........... P/N 05-08455......$71.75 Elevator Tab Control Cable, SN 1 thru 2249 1........... P/N 05-08465......$65.75 Elevator Tab Control Cable, SN 2250 and up 1........... P/N 05-08470......$75.00 Rudder Trim Cable, SN 2250 and up 2........... P/N 05-08475......$46.75 Rudder Trim Driver Cable, SN 2250 and up 1........... P/N 05-08480......$65.75
CONTROL CABLES
STRUT FILLETS
Rear Lift Strut Upper Fillet Left P/N 05-08485 ......$142.95 Right P/N 05-08490......$128.95 Forward Lift Strut Upper Fillet Left P/N 05-08495 ........$66.75 Right P/N 05-08500........$63.25 Lift Strut, Lower Fillet, left. P/N 05-08505 ...............$147.95 Lift Strut, Lower Fillet, right P/N 05-08510 ...............$130.95
Front Strut ........................................... P/N 05-08385 ............ $1,037.00 Rear Strut ............................................ P/N 05-08390 ............... $979.00
228
RIBS
CM WP ME HA AP LG EP CS IN EL AV TO
Description Main Wing Rib Main Wing Rib Main Wing Rib Wing Tip Rib Aileron Bay Rib Aileron Bay Rib Aileron Rib Inboard Aileron Bay Rib Aileron Flap Rib - Inside Aileron Flap Rib - End Flap Bay Rib Flap Bay Support Rib Rib Tank Trailing Edge Nose Rib, Tank Area Wing Tip Ribs w/Strip Aileron and Flap Rib Rib - Trailing Tank Area Butt Rib Butt Rib Rib Assy. Butt Rib (wing with wing tank) Most 7 &11 Series 8gcbc 8kcab Most 7 &11 Series Most 7 &11 Series 8kcab 8gcbc 8GCBC Most 7, 8 & 11 Series Most 7, 8 & 11 Series 8GCbc 8GCbc
P/N 05-06122
Models
OEM P/Ns 5-142 5-376 5-357L (left) 5-357R (right) 5-143 5-181 2-1978L (left) 2-1978R (right) 5-377R (right) 5-374 5-375 3-445 3-446 5-373 5-378 (left) 5-378 (right) 3-1183 3-1516 4-1030 (left) 4-1030 (right) 3-445 4-1527 5-365 (left) 5-365 (right) 7-445L (left) 7-445R (right) 7-791L (left) 7-791R (right)
Part No. Price 05-06069 $109.95 05-06123 $105.95 05-06118 $78.75 05-06117 $59.00 05-06070 $96.00 05-06097 $119.75 05-06253 $20.95 05-05254 $467.75 05-06255 $79.00 05-06122 $129.95 05-06256 $69.00 05-06257 $19.50 05-06258 $33.25 05-06259 $69.00 05-06260 $79.00 05-06261 $79.00 05-05769 05-05802 05-05876 05-05877 05-06257 05-06262 05-06119 05-06120 05-06169 05-06170 05-06220 05-06221 05-06098 05-06099 05-06101 $43.50 $46.75 $249.95 $249.95 $19.50 $26.55 $240.95 $240.95 $145.95 $145.95 $212.95 $212.95 $35.50 $50.00 $86.75
7EC, 7FC, 7KC, 7ECA, 7GC, 7HC, 7KC, 7GCA, 7ECA, 7GCAA, 7KCAB 7ECA, 7GCBC, 7GCAA, 7KCAB, 8GCBC 7EC thru 7KCAB Most 7, 8 & 11 Series 8KCAB 8KCAB Most 7 & 11 Series Most 7 & 11 Series
P/N 05-06119 P/N 05-06120
Rib Replacement Sections for 5-142 Rear Section Most 7 &11 Series 5-185-1 Nose Section Most 7 &11 Series 5-185-2 Rear Section, w/support, same as 5-185-1, Most 7 &11 Series 5-185-5 P/N 05-06099 includes 1-8875 support Other Aeronca ribs are available. Please call for availability and price for your specific needs!
RIB COMPONENTS
Description Rib Reinforcement - Flap Bay Rib Reinforcement - Flap Inboard Forward Rib Reinforcement - Flap Inboard Aft Rib Stiffener Wing Tip Rib Strip Wing Tip Rib Angle 7gcb, 7gcba, 7gcbc 7gcb, 7gcba, 7gcbc 7gcb, 7gcba, 7gcbc Most 7 & 11 Series Most 7EC & up Series Most 7EC & up Series FAA/PMAd Models OEM P/Ns 2-1590 (left) 2-1590 (right) 2-1591 (left) 2-1591 (right) 2-1598 2-1599 2-699 4-1030-1 4-1030-2 Part No. 05-06263 05-06264 05-06265 05-06266 05-06267 05-06268 05-05691 05-05874 05-05875 Price $15.80 $15.80 $15.80 $15.80 $16.90 $15.40 $32.75 $10.50 $5.00
WING TIPS
FAA/PMAd Description Wing Tips - Fiberglass Wing Tips - Fiberglass Wing Tips - Fiberglass Wing Tip Bow - Metal Models 8KCAB 7EC, 7GC, 7GCA, 7FC, 7HC,7JC, 7GCB, 7GCBC, 7KC, 7ECA, 7GCAA 8GCBC 7AC, 7BCM, 7CCM, 7DC, 7EC, 7FC, 11AC, 11B, 11C
P/N 05-06166 P/N 05-06167
OEM P/Ns 7-1506L (left) 7-1506R (right) 5-267L (left) 7-1480L (left) 7-1480R (right) 7-440L (left) 7-440R (right)
Part No. Price 05-06269 $129.00 05-06165 $133.95 05-06270 $215.00 05-06271 05-06164 05-06166 05-06167 $199.00 $295.95 $299.95 $299.95
PS BV
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
229
Rear Spar L/R Front Spar L/R Front Spar Strut Attach Fitting Front Spar Attach Fitting Front Spar Root Fitting Rear Spar Root Fitting Wing Root Drag Wire Lug Wood Spar Nails
* Pricing and availability of spars is highly dependent upon price and availability of Sitka Spruce. Please call for current prices and delivery lead time.
P/N 05-06128
P/N 05-06109
Lift Struts Lift Struts Strut Fork Rear Strut Upper Fitting Front Strut Attach Fitting Strut Attach Fitting Strut Attach Fitting
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
230
OEM P/Ns 1-2527-1 1-2527-2 1-2595-1 1-2595-2 1-2299 2-694 1-9015L (left) 1-9015R (right) 1-9803 3-1448R (right) 3-1448L (left) 4-1553R (right) 4-1553L (left) 3-451L (left) 3-451R (right) 3-453L (left) 3-453 R (right) 3-452 3-454L (left) 3-454R (right) 3-455 3-639 3-535 1-2576 5-157 1-2339 1-2397 5-179R (right) 5-179L (left) 1-2396 1-10309 1-2576 B65PS
Part No. Price 05-05459 $38.00 05-06292 $25.36 05-05480 $83.50 05-05481 $83.50 05-05389 $26.75 05-05688 $111.95 05-06293 $97.28 05-06294 $97.28 05-06295 $14.25 05-05798 $56.75 05-05797 $56.75 05-05945 $60.75 05-05944 $60.75 05-05820 $34.75 05-05821 $34.75 05-05823 $26.00 05-05824 $26.00 05-05822 $23.75 05-05825 $21.85 05-05826 $24.75 05-05827 $20.00 05-05868 $40.00 05-05845 $189.50 05-05470 05-06079 05-05404 05-05728 05-06096 05-06095 05-05427 05-05348 05-05470 05-06296 $7.85 $71.50 $59.50 $50.50 $93.50 $93.50 $24.75 $51.25 $7.85 $6.65
CM WP ME HA AP LG EP CS IN
P/N 05-05914
P/N 05-06007
P/N 05-06075
P/N 05-06127
Description Instrument Panel blank no holes Instrument Panel Interior Panel Left Front Instrument Panel Lower Instrument Control Panel Radio Panel Cabin Speaker Cover Electrical Panel Blank Description Fiberglass Door Fiberglass Door Upper Door or Window Handle Assy. *Meets AN, MS, NAS, or MIL-Spec Photo Door Frame
P/N 05-06144
Models 7AC, 7BCM, 7CCM, 7DC 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC 7A, 7BCM, 7B, 7CCM, 7DC 7ECA, 7GCAA, 7GCBC, 8KCAB, 8GCBC 7ECA, 7GCAA, 7GCBC, 8KCAB, 8GCBC 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC 7ECA, 7GCAA, 7GCBC, 7KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB Models 7EC, 7FC, 7GC, 7HC, 7GCA, 7GCB, 7GCBA, 7KC 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB, 8GCBC
OEM P/Ns 5-150 4-1428 4-608 5-390 4-1734 2-1919-1 3-1387 4-1363 OEM P/Ns 7-1084-1 7-1265
Part No. 05-06075 05-05914 05-06007 05-06127 05-05967 05-05652 05-06297 05-05885 Part No. 05-06298 05-06144
Price $89.75 $99.75 $97.25 $114.95 $66.75 $66.00 $25.00 $34.00 Price $496.13 $604.00 $19.75 $299.95 $342.95 $22.65 $99.75 $39.25 $7.50 $8.00 $69.50 $9.75 $32.00 $1.20 / ft.
EL AV TO PS BV
C602-6222916A 05-06299 7-1457-1 (window) 7-1457-2 (lower) 1-2423 1-2594 1-3514 1-3514-1 1-3514-2 2-1451 7-1265-6 1-9927 4-655 05-06157 05-06158 05-05439 05-05479 05-05529 05-05530 05-05531 05-05615 05-06145 05-05597 05-06300
P/N 05-06157
Door Hinge Cabin Door Latch Cabin Door Stop Assy. Clamp Tube Brace Assembly Door Latch Wood Spacer Door Moulding Door Seal 3/8" round (Code 5)
7A, 7BCM, 7CCM, 7DC, 7EC 7AC, 7BCM, 7CCM, 7DC, 7EC, 15AC All models except 8KCAB All models except 8KCAB P/N 05-06158 All models except 8KCAB All 7 Series & 8KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB 7ECA, 7GCBC, 7GCAA, 7KCAB, 8KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
231
297
4-1487
Left or Right Door - Front Sliding Window (clear) Left or Right Door - Rear Sliding Window (clear) Left or Right Rear Window (clear) Left Front Pilot Window (clear)
SKYLIGHT
Skylight 7ACA, 7GCBC, 7ECA, 7GCAA, 7KCAB, 8GCBC, 8KCAB 288 7-1286 05-02818 (clear) 05-02819 (green) $124.95 $124.95
WINDOW SETS
Window Set - Includes one each right and left rear bubble windows, right door bubble window, left front swinging bubble window Window Set - Includes one each left front sliding window fwd., left front sliding window rwd. right and left rear bubble window and right door bubble
Rear Window Frame Rear Window Sill Strip (wood) Transom Window Frame
P/N 05-06176 P/N 05-06177
289, 290, 291 & 297 231, 232, 289, 290 & 291
05-06464 05-06465
$361.25 $344.95
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
232
Part No.
Price
05-06311 $1,805.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
4-1624OG
05-06312 $4,327.00
4-1624SG 4-1557K 4-1624K 2-1887 3-1537-1 (front) 3-1537-2L (left rear) 3-1537-2R (right rear) 1-2258 1-2358-2 1-2499 1-9850 1-9945-1 1-9945-2 2-7762 2-7763 2-796 2-796-1 1-2325 1-2519 1-9911 1-8966 1-2613L 1-2613R 2-718 3-1534
05-06313 $4,231.00 05-06314 $3,772.75 05-06311 $1,805.00 05-05641 05-05809 05-05810 05-05811 05-06315 05-05409 05-05457 05-06316 05-05592 05-05599 05-06317 05-06318 05-05726 05-05727 05-05396 05-05458 05-05596 05-05579 05-06319 (left) 05-06320 (right) 05-05703 05-05803 $66.75 $86.50 $90.00 $90.00 $20.00 $35.90 $34.00 $27.83 $10.00 $16.75 $64.75 $49.50 $119.95 $13.25 $25.50 $16.75 $40.25 $38.00 $29.50 $29.50 $74.50 $117.95 $87.00 $87.00
P/N 05-05809
Brake Torque Plate Brake Cable Eyebolt Brake Cable Brake Rod Parking Brake Cable Assembly Parking Brake Cable Cable Brake Assembly, LH Cable Brake Assembly, RH Parking Brake Balance Beam Tube, Parking Brake Beam Parking Brake Lever Release Plate Parking Brake Lever Spring Brake Pedal Connecting Rod Hydraulic Brake Line Assembly
P/N 05-05409
Brake Pedal Brake Link Toe Brake Rudder Pedal Bracket Toe Brake Master Cylinder
P/N 05-05872
05-06324 $46.85
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
233
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Description Fender, LH/RH Plate Cover for 7-1141 LH/RH Fender, LH/RH Wheel Pant Cover for 7-1301 LH/RH Wheel Pant Support Bracket Wheel Pant Support Tube
Description Landing Gear Axle Strut Scout Axle Scout Landing Gear - Left Spring Gear Axle Landing Gear Axle Fitting Axle Upper End Fitting (4" long) Axle Upper End Fitting (6-1/4" long) Landing Gear Axle Strut Landing Gear Axle Strut Landing Gear Yoke Plate Landing Gear Wheel Retaining Nut Landing Gear Axle Spring Axle Tube Axle Strut Tube Landing Gear Axle Assembly Wheel Pant Axle Nuts Tail Wheel Spring P/N 05-05555 Fitting Assembly
Model 7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCB, 7GCAA, 7GCBC,7HC, 7KCAB 7GCBC, 7ECA, 7GCAA, 7KCAB, 8KCAB
LH
P/N 05-06141
RH
LH -
RH
Price
7-1141LH 7-1141RH
05-06141 $466.95
2-1640LH 2-1640RH 05-06142 $466.95 7-1301LH 7-1301RH 05-06326 05-06327 $188.00 2-1945LH 2-1945RH 05-05654 05-05655 $41.75 2-100081
P/N 05-06327
7EC, 7ECA, 7FC, 7GCA, 7GCB, 7GCBA, 7GCBC, 7GCAA, 7HC, 7KCAB 7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7KCAB
05-05613 05-05546
OEM # 7-807 3-1549 7-1461L 3-1600 1-2260 Part No. 05-06222 05-06328 05-06329 05-06330 05-05379
$33.50 $70.25
Price $567.00 $154.00 $750.00 $318.95 $28.75 $39.95 $39.95
1-8790
1-9997-1 05-06331 1-9997-2 05-06332 7-1062 7-1080 1-2326 1-706 2-1917 2-1917-1 4-1138 4-1139 2-2145 2-1525 18854 18854-1 1555-1 1-2273 1-2119 1-10538 1-318 1-316
P/N 05-06136
05-06136 $730.00 05-06139 $744.00 05-06333 $29.00 05-06334 $29.50 05-06335 $181.65 05-06336 $90.93 05-06337 $429.00 05-05884 $650.00 05-06338 $52.50 05-06339 05-05555 05-05556 05-05536 05-05381 05-05373 05-06340 05-06341 05-06342 $17.00 $70.75 $9.50 $13.50 $7.25 $25.75 $28.61 $30.00 $13.75
P/N 05-05556 Stud Tail Leaf Spring P/N 05-05536 Fitting Fairing Clip (narrow) Oleo Packing Landing Gear Wheel Retaining Nut Landing Gear Oleo Strut Piston Spring Retainer
P/N 05-06340
NOTE: Some parts on this page are primed or varnished in accordance to FAA Approved Drawings.
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
234
CM WP ME HA
P/N 05-06066 P/N 05-06210 P/N 05-05988
P/N 05-05986
AP LG
P/N 05-05665
EP
Part No. 05-05729 Price $133.95
Aircraft Application 7A, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7ECA, 7FC, 7GC, 7GCAA, 7GCB, 7GCBC, 7KC, 7KCAB, 8KCAB, 11C
OEM # 2-816
CS IN EL AV TO PS BV
P/N 05-06080
P/N 05-06116
235
CM WP ME
P/N 05-06349
P/N 05-06215
Description
Models
Strap Length
7GCBC, 7ECA, 7GCAA, 7KCAB, 8GCBC, (8GCBC 35 gal. only) 7BCM 7ECA, 7GCAA, 7GCBC, 7KCAB 8KCAB 8KCAB 30.00" 23.38" 9.68" 28.375" 27.75" 77.875" 39.50" 11.00" 67.50" 45.50" 21.00" 29.63" 28.938"
HA AP LG EP CS IN EL AV TO PS BV
6 Gallon Aux. Fuel Kit LH/RH Fuel Tank Strap (inboard & outboard) for tank 7-10001 20 Gallon Fuel Tank LH/RH Fuel Tank Strap
OEM P/Ns 7-10001K (includes 2 tanks, hardware and plumbing) 7-10001L (left tank only) 7-10001R (right tank only) 7-1449L 7-1449R 7-1001LK 7-1001RK 2-942-8 7-1403L 7-1403R 2-761-9 2-761-10 2-761-1 7-772L 7-772R 2-942-2 2-942-5 2-761-1 2-761-2 2-761-3 2-761-5 2-761-6 2-761-7 2-761-8 4-1496 4-1498 1-8880-1 1-8880-2 1-10037 2-1577-2 1-2456-1 1-2593-2 1-2593-1 1-10522 1-2458 1-8871-8
Part No. 05-06348 05-06131 05-06132 05-06349 05-06155 05-06350 05-06351 05-05854 05-06151 05-06153 05-05716 05-06352 05-05709 05-06215 05-06216 05-05752 05-05758 05-05709 05-05710 05-05711 05-05712 05-05713 05-06560 05-06561 05-06353 05-06354 05-06355 05-05567 05-06356 05-05623 05-05445 05-05478 05-06357 05-06358 05-05448 05-05565
Price $2,199.00 $957.00 $957.00 $1,274.00 $1,274.00 $583.35 $583.35 $17.50 $1,653.00 $1,272.00 $33.00 $17.50 $30.50 $637.00 $637.00 $19.50 $221.95 $30.50 $30.50 $30.50 $33.00 $33.00 $22.75 $28.75 $39.95 $45.30 $43.70 $40.00 $37.50 $109.95 $34.25 $15.75 $8.85 $19.95 $29.75 $9.00
6 Gallon Fuel Tank LH/RH Fuel Tank Strap (inboard) for tank 7-772 Fuel Tank Strap (outboard) for tank 7-772 Fuel Tank Strap for tank 7-511 Fuel Tank Strap for tank 7-460 Fuel Tank Strap for tank 7-460 Fuel Tank Strap Fuel Tank Strap Fuel Tank Channel Support Wing Tank Channel Support Fuel Manifold, front Fuel Manifold, front Fuel Manifold, rear Fuel Manifold Assembly, rear Fuel Shut Off Tube Non-Vented Fuel Cap Vented Fuel Cap Fuel Tank Vent Fitting Fuel Shut Off Universal Joint Spacer
P/N 05-05478 P/N 05-05623
7CCM, 7DC, 7EC 7CCM, 7DC, 7EC 7CCM, 7DC, 7EC 11AC 7AC, 7CCM, 7DC, 7E 7AC 7KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB 8KCAB 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC 7ec, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7KC 7EC, 7ECA, 7FC, 7JC 7EC, 7FC, 7GC, 7GCA, 7HC, 7GCB, 7GCBA, 7GCBC, 7ECA, 7GCAA, 7KC, 7KCAB, 8GCBC, 8KCAB 7EC, 7ECA, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7JC, 7KC, 7KCAB, 8GCBC, 8KCAB 7A, 7BCM, 7CCM, 7DC, 7EC, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7HC Most 7 & 11 Series P/N 05-05445 Most 7 & 11 Series 8GCBC P/N 05-05448 Most 7 Series 7ECA, 7GC, 7GCA, 7GCB, 7GCBA, 7HC
AERONCA WING TANK KIT - For models 7AC, 7BCM, 7CCM, 7EC, 11AC, 11BC. Simple installation. Kit comes complete with
left and right hand tanks, fittings, fuel line, mounting brackets, installation instructions and drawings. Fuel capacity is 5 gallons for each tank. Includes two Cat. No. E-482-000 fuel caps. FAA/PMAd. P/N 05-06359 .................................................................................. $795.95 / set
236
CM
P/N 05-06043 P/N 05-06368 P/N 05-05950
Models 7AC, 7BC, 7CC, 7EC, 7FC, 7GC, 7GCB, 7HC, Firewall (no large holes) 7JC, 7KC, 7GCA, 7GCBA, 7GCAA, 7GCBC, 7KCAB, 7ECA, 8KCAB, 11AC, 11BC, 11CC Firewall (2 large holes) Same as 4-860-2 (but two holes like 4-1640) 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB. Firewall (2 large holes, w/bottom cut out, Scout) w/cutout Service Kit - Frame Reinforcement Kit Fitting, Belly Skin 7AC, 7BCM 7GCAA, 7ECA, 7GCBC, 7KCAB, 8GCBC
Description
WP ME HA AP LG EP CS IN EL AV TO PS BV
Models 8KCAB 7AC, 7ACA,7BCM, 7CCM, 7DC, 7EC, 7ECA, 7FC, 7GC, 7GCA, 7HC, 7GCB, 7GCBA, 7JC, 11AC, 11BC, 11CC *4-864 replaces 4-544 per service bulletin #19 P/N 05-05929 *4-865 replaces 4-543 per service bulletin #19 7ECA, 7GCAA, 7KCAB, 7GCBC 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB 7A, 7ACA, 7BCM, 7CCM, 7DC, 7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7KC, 7KCAB, 8KCAB, 11A, 11B, 11C All Models P/N 05-05990 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB 7AC, 7EC, 7FC, 7GC, 7GCA, 7HC 7A, 7B, 7BCM, 7CCM, 7DC, 7EC, 7FC 7ECA, 7GC, 7GCA, 7HC, 7KC, 8KCAB, 8GCBC 7AC, 7EC, 7FC 7ECA, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBC, 7HC, 7KC, 7KCAB, 8GCBC, 8KCAB 7AC, 7BCM, 7CCM, 7DC, 7EC, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7KC, 11AC, 11BC, 11C
OEM P/Ns Cat. No. Price 4-1701 (left) 05-06370 $601.65 4-1703 (right) 05-06371 $601.65 4-544 (left)* 05-06045 $606.00 4-543 (right)* 05-06046 $606.00 4-1699 (left) $527.15 4-1669 (right) 05-05960 $494.95 4-1479 05-05929 $566.00 1-2399 4-562 2-1905 2-698 3-471 3-1072 2-686 2-1534 1-2540 05-05430 $6.85 05-05990 $50.00 05-05646 $79.85 05-05690 05-05830 05-05764 05-05686 $92.50 $157.95 $186.95 $150.95
Elevators Elevator Frame Assembly, RH Guard Tab Cable Pulley Elevator Trim Tab Elevator Trim Cable Elevator Trim Control Cable Up Elevator Control Cable Up Elevator Cable Down Elevator Control Cable Down Elevator Cable Elevator Stop Bolt
Models
Part No.
Price
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
237
CM WP ME
P/N 05-05544 P/N 05-05371
Description Inter-Cylinder Baffle - Cylinder Head Inter-Cylinder Baffle Stiffener R.F. Cylinder Baffle Baffle Cylinder - Right Rear Cylinder Head Baffle Spring Rod Cylinder Head Baffle Spring Baffle, Crankcase
Cylinder Baffles Bracket Front Cylinder Baffle (Component to 7-477 & 7-478) Engine Baffle Assembly Engine Baffle Assembly
HA AP LG
P/N 05-06376
P/N 05-06180
P/N 05-06186
EP CS IN EL AV TO PS BV
P/N 05-05955
Engine Baffle Assembly Engine Baffle Assembly Engine Baffle Assembly Engine Baffle Assembly Engine Baffle Assembly Engine Baffle Assembly Crankcase Baffle Assembly
P/N 05-05814 P/N 05-05816
Engine Baffle Assembly Flange Air Heater Inlet Engine Baffle w/1" holes Engine Baffle Seal Material *Meets AN, MS, or Mil-Dpec
1-873 2-726 3-631 1-2424 1-1776 7-470 (right) 7AC, 11AC 7-469 (left) 7-471 (upper) 7-475 (right rear) 7-476 (left rear) 7AC, 11AC 7-477 (right front) 7-478 (left front) 1-2414R 7AC, 7CCM, 7DC, 11AC 1-2414L 3-1395R (right side) 7GCBC, 7KCAB, 7GCAA, 8KCAB w/150 hp only 3-1395L (left side) 4-1421 (left front) 4-1422 (right front) 7GCAA, 7GCBC, 7KCAB, 8KCAB 4-1427 (right rear) 4-1430 (left rear) 3-629 (left) 7BCM, 7CCM, 7DC, 7EC, 7FC, 7ECA, 7JC, 11B, 11C 3-630 (right) 3-1563R (right side) 3-1563L (left side) 4-1654 (right front) 8GCBC, 8KCAB 4-1653 (left front) 4-1656 (right rear) 4-1658 (left rear) 4-674 (left rear) 7CCM, 7DC, 11C 4-673 (right rear) 7CCM 4-684 (left front) 4-736 (right rear) 7BCM, 11BC 4-738 (left rear) 7ECA - LYCOMING O-235 4-1749 (left rear) 7DC, 11B, 11C 4-737-3 (left front) 7BCM, 7CCM 4-737-4 (left front) 7BCM, 7CCM, 7DC, 11B, 11C 4-739 (right front) 4-740 (upper) 7DC, 7EC, 7FC, 7JC, 7KC, 11B, 11C 4-741 (lower left) 4-742 (lower right) 4-879 (left front) 4-880 (right front) 7EC, 7FC 4-881 (left rear) 4-882 (right rear) 7A, 7BCM, 7CCM, 7DC, 7EC, 7FC, 7JC, 7KC, 11AC, 1-2442 11BC, 11CC 8GCBC 4-1657 Sold per square foot. T8071-1
Models 7AC, 7BC, 7CC, 7DC, 7EC, 7FC, 7JC, 11AC, 11B, 11C 7AC, 7BC, 7CC, 7DC, 7EC, 7FC, 11AC, 11B, 11C 7AC, 11AC 7BCM, 7CCM, 7DC, 7EC, 7ECA, 7FC, 7JC, 11B, 11C 7AC, 7BC, 7BCM, 7CCM, 7dc7ec, 7fc, 11a, 11b, 11c 7AC, 7BC, 7BCM, 7CCM, 7dc7ec, 7fc, 11a, 11b, 11c
Part No. 05-05371 05-05544 05-05706 05-05867 05-05440 05-06376 05-06180 05-06178 05-06182 05-06186 05-06188 05-06190 05-06191 05-05434 05-05433 05-05785 05-05783 05-05908 05-05910 05-05912 05-05915 05-05863 05-05865 05-05816 05-05814 05-05955 05-05954 05-05957 05-05959 05-06024 05-06022 05-06026 05-06030 05-06034 05-05970 05-06033 05-06032 05-06035 05-06037 05-06039 05-06041 05-06057 05-06059 05-06061 05-06063 05-05442 05-05958 05-06377
Price $17.75 $9.00 $24.75 $34.75 $5.00 $10.50 $111.95 $96.75 $66.75 $82.50 $73.25 $184.95 $172.95 $10.25 $10.25 $98.50 $108.95 $108.95 $123.95 $196.95 $211.95 $92.75 $90.75 $36.00 $43.00 $112.50 $129.50 $97.50 $169.95 $225.95 $111.95 $108.95 $109.95 $148.95 $118.95 $105.95 $105.95 $208.95 $92.75 $73.00 $53.50 $132.95 $144.95 $106.95 $132.95 $44.75 $73.50 $26.00
P/N 05-06059
If the baffle you need is not listed, please call and inquire. We have many more Aeronca, Bellanca and Champion baffles. Too many to list here.
OEM P/Ns 4-545* 4-1376 4-866 4-1697 1-2398-1 (painted) 1-2398-2 (unpainted) 1-3737 1-3737-1 AN23-40 AN394-71 1-2892-2 1-2280 1-2496-2 (left) 1-2496-3 (right) 1-2568 1-769
Part No.
Price
05-06047 $608.00 05-05890 $920.00 05-06047 $608.00 05-06378 $699.83 05-05429 05-06379 05-06380 05-06381 AN23-40 05-06382 05-06383 05-05384 05-05455 05-05456 05-06384 05-06385 $6.75 $5.45 $5.25 $5.50 $1.18 $0.82 $50.68 $80.00 $60.25 $60.25 $14.90 $12.75
Most 7EC and up Series, 8GCBC & 8KCAB (.25 ream) 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC 7, 8 & 11 Series 11B, 11C 7AC, 7BCM, 7CCM, 7DC, 7EC, 7GC, 7GCBC, 7CCA, 7GCBA, 7ECA, 7GCAA, 7GCBC, 7KCAB, 8KCAB, 8GCBC P/N 05-06384 11AC, 11B , 11C Most 7 Series Most 7 Series
P/N 05-06385
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
238
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
05-06388 $20.75
Cushioned Clamps - Loop-type, Cushioned, line support clamps, made of alluminum alloy. Cushion is non-fuel resistant. 5/8 Clamp* MS21919-DG10 MS21919-DG10 $0.30 1/8 Clamp* MS21919-DG2 MS21919-DG2 $0.47 3/16 Clamp* MS21919-DG3 MS21919-DG3 $0.32 1/4 Clamp AN742-4* MS21919-DG4 MS21919-DG4 $0.23 7/16 Clamp* MS21919-DG7 MS21919-DG7 $0.55 Pulley - Aileron Control 7ACA, 7ECA, 7GCAA, 7GCBC, 7KCAB 1-10309 05-05348 $51.25 Pulley - Fairlead (aluminum) Most 7, 8 & 11 Series 1-2395 05-06397 $15.50 Pulley Guard (rudder cable) Most 7, 8 & 11 Series 1-2398-1 05-05429 $6.75 (AN210) Pulley* MS24566-4B $22.50 MS24566-4B Anti Friction Bearing Pulley (Non-Metallic)* MS24566-3B MS24566-3B MS24566-3B $17.50 Pulley - Aileron Control Cable 7GCBC, 7ECA, 7GCAA, 7KCAB, 8GCBC 1-10365 05-06398 $32.00 Cylinder Head Baffle Spring Most 7AC-7FC, & 11Series 1-1776 05-06376 $10.50 Rear Rudder Pedal Spring Most 7 & 8 Series 1-2568 05-06384 $14.90 Rudder Pedal Spring Most 7 & 8 Series 1-769 05-06385 $12.75 Torque Tube Bearing Block (phenolic) Most 7 Series and 8KCAB 1-2599 05-06399 $56.47 Torque Tube Bearing Block (aluminum) 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB 1-10370 05-06400 $59.95 Fabric Hold Down Washer Most 7 & 11 Series 1-2331 05-06401 $0.21 Clamp -1-1/2" Diameter Tube 7CCM, 7EC, 7FC, 7HC, 7GCBC, 7ECA, 7GCAA, 7KCAB, 7KC 1-2939 05-05515 $14.75 Clamp Assembly 1-1/2" Diameter Tube 7CCM, 7EC, 7FC, 7GC, 7GCA, 7HC, 7GCB, 7ECA, 7GCAA, 1-2941 05-05516 $38.00 7KCAB, 7KC Bowden Cables - (solid wire ends). Spiral wound galvanized wire casing. Used for push-pull controls of any length. I.D. .078 and O.D. 7/32 dia. Bowden Cable Casing, 38-1/8" long 7ECA 1-2578-11 05-06402 $17.15 Bowden Cable Casing, 56" long 7ECA 1-2578-12 05-06403 $21.00 7AC, 7CCM, 7DC, 7EC, 7FC, 7GC, 7GCB, 7JC 1-2578-3 05-05472 $37.25 Bowden Cable Casing, 56" long Bowden Cable Casing, 24-3/4" long 7EC, 7BCM, 11AC, 11B 1-2578-4 05-05473 $42.00 Bowden Cable Casing, 16" long 11AC, 11B 1-2578-5 05-06404 $10.00 Bowden Cable Casing, 21" long 11AC, 11B 1-2578-6 05-05474 $42.00 Bowden Cable Casing, 23" long 11AC, 11B 1-2578-7 05-05475 $42.00 Bowden Cable Casing, 52-3/4"" long 7GCBA 1-2578-8 05-06405 $23.99 * Meets AN, MS, or Mil-Spec
Note on Model Eligibility: We have made every effort possible to detail installation eligibility for Aeronca parts based upon the best information we have available. If you are uncertain as to whether a specific OEM part number may be installed on your aircraft, you must consult either your aircraft owner or service manuals, or check with your mechanic. We do not warrant that models listed in the catalog are accurate in all instances. Please call us if you have questions about specific part numbers and model eligibility and we can research your question prior to your order.
239
CM WP ME HA AP
7AC Front Strut ....................................... P/N 7AC Rear Strut ........................................ P/N 11AC Front Strut ..................................... P/N 11AC Rear Strut ...................................... P/N Citabria Front Strut .................................. P/N Decathlon Front Strut, Left ...................... P/N Decathlon Front Strut, Right.................... P/N Decathlon Rear Strut ............................... P/N Scout Front Strut ..................................... P/N Scout Rear Strut ...................................... P/N
05-08515 ........... $536.00 05-08520 ........... $423.95 05-08525 ........... $478.95 05-08530 ........... $424.95 05-08535 ........... $535.00 05-08545 ........... $744.00 05-08550 ........... $768.00 05-08555 ........... $432.95 05-08565 ........... $449.50 05-08570 ........... $289.95
Nose Cowl ....................... P/N Fuselage Cowl (7AC only) P/N Top Cowl.......................... P/N Bottom Cowl .................... P/N
LG EP CS IN EL AV TO PS BV
................................... P/N
05-08575 ..............$64.70
with High Energy Taxi Spring .................... P/N with Standard Spring ................................. P/N Fits 7AC and 11AC ................................... P/N 7AC and 11AC Spring Only ...................... P/N
Oleo Case Frame (Uncovered) 7AC & 11AC Series .. P/N 05-08765.......... $579.24 Early Citabria ............ P/N 05-08770.......... $486.00
TAILWHEEL LEAF SPRINGS COMPLETE SETS EXHAUST SYSTEM FOR 7AC / 11AC
LH Stack ................... P/N 05-08705 ........... $240.95 RH Stack .................. P/N 05-08710 ........... $240.95 Heat Muff.................. P/N 05-08715 ........... $209.95
Citabria/Decathlon (short) P/N 05-08780 ..........$115.95 Scout (long) .......P/N 05-08785 ..........$176.95
Early Citabria Axle Strut .................................. P/N 05-08790 .... $600.00 Aeronca Axle Strut .......................................... P/N 05-08795 .... $707.50
240
CM
ERCOUPE WINDOW WELTS
WP ME HA AP
BOTTOM COWLS
P/N 05-08820 .............$585.00
Mooney Fairing (top in photo, approx. 17 inches long) P/N 05-08825 ............... $83.75 Ercoupe Fairing (bottom in photo, approx. 14-3/4 inches long)...................... P/N 05-08830 ............... $76.75
For Ercoupe, welded alum., SN 2623 &up P/N 05-08865 .......$1,745.00 For Forney, Alon P/N 05-08870 .......$1,637.00 For M-10 P/N 05-08875 .......$1,276.00
LG EP CS IN EL
This is the original type steering ball as used on Ercoupe, Forney and Alon. P/N 05-08845 ............... $10.50
For Forney, Alon and M-10 Models with gauge in left hand tank. Left Hand Tank (48147) P/N 05-08885 ............................. $1,562.00 Right Hand Tank P/N 05-08890 ............................. $1,562.00
This kit consists of rod-end bearing and all necessary hardware. It is FAA approved for all Ercoupe, Forney, Alon and M-10. For use with the part number 52035 push-rod that has the male threaded stud. (Steering Collar not included) ........................................................P/N 05-08905 ..................... $113.75 Push Rod........................................P/N 05-08910 ..................... $156.84
P/N 05-08895.............................$138.95
AV TO
Left Hand Stack (stainless) P/N 05-08920 ..........................$591.00 Right Hand Stack (Stainless) P/N 05-08930 ..........................$611.00 Muffler ............P/N 05-08935 ...$683.00 Carburetor Heat Shroud P/N 05-08940 ..........................$147.95 Cabin Heat Shroud P/N 05-08945 ..........................$225.95
PS
Lay out your instrument and radio arrangement using this blank Ercoupe Panel which has locating holes only for the two control columns. FAA field approval required. ....................... P/N 05-08900 .................. $291.95
BV
CABIN HEAT SHROUD ASSEMBLY FOR ALL ERCOUPE MODELS AFTER 1945
AIRCRAFT SPRUCE WEST
Prices Subject to Change Without Notice
241
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
NAVION PARTS
Aircraft Spruce is a factory authorized distributor for these Navion parts manufactured under FAA/PMA approval. These parts are eligible for installation on all Navion models unless otherwise noted. Description Fuel Selector Valve Main-off Fuel Selector Valve Main-Auxoff Fuel Selector Valve Left-Main-RGT-O Digital fuel qty gauge Main Digital fuel qty gauge MN/AUX Digital fuel qty gauge L/R Fuel level Transmitter 5 hole Fuel level Transmitter 6 hole Fuel level Transmitter AUX TNK Fuel level Transmitter TIP TNK Flush Fuel Cap Gear Switches Main Nose Mixture Cable-Vernier Propeller Cable-Vernier Baggage Door Overhead Panel Cable Roller Assembly Set of 4 Primary Monitor - CHT, EGT, and more Pilot & Co-Pilot Sholder Restraints Nose Gear Seal Kits Main Gear Seal Kit Aft. Equipment rack Texas Patch LH Texas Patch RH Canopy Felt with Inst Letter 28 Heated Pitot Tube Mast Sloped Windshield Navion P/N 147-30013-201 147-30013-202 147-30013-203 147-40002-1001 147-40002-1002 147-40002-1003 173-70010-20 173-70010-10 145-51071-4 161.30015.67 147-30012-150 147-40002-10 205-30001-1002 205-30001-1003 -Part No. Price
05-04271 $934.00 05-04272 $1,054.00 05-04273 $962.00 05-04274 $635.00 05-04275 $641.00 05-04276 $641.00 05-04277 $291.95 05-04278 $304.95 05-04279 $291.95 05-04280 $304.95 05-04281 $668.00 05-04282 $84.50
TaylorCraft Front Lift Strut.......................... P/N 05-08970......... $575.78 TaylorCraft Rear strut ................................. P/N 05-08975......... $543.15 Note: all post WWII will not work on a Taylor A/C F/L2M
Outboard Leading Edge (54 1/4) .............. P/N 05-08980........... $79.50 Center Leading Edge (57 1/4)................... P/N 05-08985........... $88.75 Inboard Leading Edge (64) ....................... P/N 05-08990........... $97.25 Note: all post WWII will not work on a Taylor A/C F/L2M
Applicable to B series and BC12D Continental powered Taylorcraft (cowl grills not included) P/N 05-09005 ...............$840.00
05-04288 $2,099.00
242
TAYLORCRAFT PARTS
SEALED TAYLORCRAFT LIFT STRUT ASSEMBLIES
CM
Front Clamp Rear Clamp
Aero Fabricators, the manufacturing division of The Wag-Aero Group, now has FAA approval to manufacture NEW sealed lift strut assemblies as well as approval to REPAIR and seal existing lift strut assemblies (as long as there is no corrosion) for Taylorcraft Models a, bc, bcs, bc-65, bcs-65, bc1265, bcs12-65, bc12-d, bcs12-d, bc12-d1, bcs12-d1, bc12d-85, bcs12d-85, bc12d-85, bcs12d-4-85, bf, bfs, bf-60, bfs-60, bf-65, bf12-65, bl, bls, bl-65, bls-65, bl12-65, bls12-65, fa-iii, 19, f19, f21, f21a, f21b, f22, f22a, f22b, f22a. These sealed lift struts satisfy the requirements of AD 2007-16-14. For pricing please call our friendly and knowledgeable customer service Associates at 1-800-558-6868 or if you have any questions ask for Tom (ext. 124). All FAA/PMAD. Description Rear Lift Strut w/clamp Rear Jury Strut clamp only Front Lift Strut w/clamp Front Jury Strut clamp only Remanufactured Front Sealed Lift Strut with out clamp Remanufactured Rear Sealed Lift Strut with out clamp 2.76 1.44 .049 Major 1.78 Minor Wall Thickness 1.06 .049 Cat. No. 05-05172 05-05173 05-05174 05-05175 05-06243 05-06244 Price ea. $520.00 $15.00 $625.00 $14.75 $333.95 $400.95
WP ME HA AP LG
TAYLORCRAFT PARTS
P/N 05-05176 P/N 05-05177 P/N 05-05178
Description Taylorcraft Trim Tab Frame For L24A, B and M models. Made of wood. FAA/PMAD Taylorcraft Trim Tab For L2, L2A and TG6. FAA/PMAD Taylorcraft Bungee Tool Taylorcraft Rudder For BC12D. Direct replacemnt for OEM P/ND-A410. FAA/PMAD
EP CS IN
P/N 05-05179
For BC12D. Direct replacemnt for OEM P/ND-A419. FAA/PMAd P/N 05-05180 ........... $475.00
TAYLORCRAFT STABILIZER
P/N 05-05187
EL AV TO PS BV
For BC12D. Direct replacemnt for OEM P/NDA420. FAA/PMAd P/N 05-05181 ......$375.00
TAYLORCRAFT ELEVATOR, RH
6 gallon Wing Fuel Tanks, For Models B, B12, BC, BC12D, BCS, BCS12D, 19, F19, F21. OEM P/N 1546. FAA/PMAd LH ............................................. P/N 05-05185...........................$459.95 RH ............................................ P/N 05-05186...........................$459.95
12 gallon Fuselage Fuel Tanks, For Models B12, BC12D, 19, F19. OEM P/N 0797. FAA/PMAd ............... P/N 05-05187...........................$645.00
Description OEM Part No. Nipple for #8-36 tie rods. FAA/ A-986 PMAd Tie Rod End Insert. FAA/PMAd A-4002 Tie Rod Fuselage Strap. FAA/ A-4001 PMAd Tie Rod Fin Strap. FAA/PMAd A-4008 Tie Rod Stabilizer Strap. FAA/ A-4009 PMAd
243
PACKAGE NO. 1 Includes 2 Cleveland 5.00-5 magnesium wheels & brakes plus (2) 6 ply tires & tubes. (Wt. approx. 28 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-00100 ........................... $1,483.00 B w/Goodyear Flight Custom II Tires (Goodyears latest design) P/N 06-00200 ........................... $1,678.00 C w/Lamb Tires & Tubes (11.400 x 5) P/N 06-00300 ........................... $1,326.00
The heavier-duty brake discs, linings and hardware in these kits will increase braking capacity for the heavier, faster-landing aircraft now being designed & built.
PACKAGE NO. 2 Package No. 1 plus 2 Cleveland #10-35 master cylinders. (Wt. approx. 30 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-00400 ........................... $2,552.00 B w/G.Year Flight CustomII Tires & Tubes P/N 06-00500 ........................... $2,730.00 C w/Lamb Tires & Tubes (11.400x5) P/N 06-00600 ........................... $2,378.00
#199-93 UPGRADE KIT - For #199-102 standard wheels and brakes. Upgrades current 40-78B/ 30-9 to new 40-230/30-181 specs. Consists of #66-106 linings, discs, shims, bolts, rivets and nameplates for 2 wheels & brakes. P/N 199-93 ............ $469.95 #199-156 KIT (AIRCRAFT TO 1500 LBS) - Kit consists of two 40-230 wheel assemblies and two 30-181 brake assemblies. Uses #66-106 linings. Fits 1-1/4 dia. axles. Used on Vari-eze. P/N 199-156 ....... $1,401.00 #199-152 KIT FOR LONG-EZ & COZY (AIRCRAFT TO 2200 LBS) - Kit
contains two 40-151 wheel assemblies and two 30-133 brake assemblies. Uses #66-55 linings. Fits 1-1/4 dia. axles. P/N 199-152 ....... $1,366.00
PACKAGE NO. 3 Includes 2 Cleveland 6.00-6 magnesium wheels and brakes plus two 4 ply tires and tubes. (Wt. approx. 32 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-00700 ........................... $2,488.00 B w/G.Year Flight CustomII Tires & Tubes P/N 06-00800 ........................... $2,743.00
Although magnesium wheels and brakes are considerably lighter, magnesium is subject to corrosion and should not be used for amphibious operation. Only organic linings should be used on all brakes. All parts of the 500 x 5 size wheels and brakes for amphibians are constructed of anodized aluminum for water resistance. Although a special 40-74 series of 600 x 6 wheels and brakes are manufactured for amphibious use, with chrome plated bearings and brake disc and water drainage holes, they are too costly for use on homebuilt aircraft. The use of standard Cleveland aluminum wheels with standard bearings on amphibian aircraft is suggested. If bearings are kept well greased, reasonable service can be expected, but earlier bearing replacement should be anticipated. 500 x 5 (Anodized Aluminum) Kit P/N 199-103 (Std. Disc) ........................ $1,453.00 Pr Kit P/N 199-103C (Chrome Disc) ............... $1,689.00 Pr 600 x 6 (Anodized Aluminum) Kit P/N 199-105 (Std. Disc) ........................ $1,564.00 Pr Kit P/N 199-105C (Chrome Disc) ............... $1,738.00 Pr 500 X 5 ALUMINUM NOSE WHEEL, P/N 40-87C ................... $818.00
PACKAGE NO. 4 Package No. 3 plus 2 Cleveland #10-35 master cylinders. (Wt. approx. 34 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-00900 ........................... $3,540.00 B w/G.Year Flight Custom II Tires & Tubes P/N 06-01000 ........................... $3,795.00
PACKAGE NO. 5 Includes 2 Cleveland 6.00-6 magnesium wheels & brakes plus two lowprofile lightweight 6-ply 15x6.00-6 tires & tubes. (Wt. approx. 32 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-01100 ........................... $2,557.00 B w/G.Year Flight Custom II Tires & Tubes P/N 06-01200 ........................... $2,676.00
PACKAGE NO. 6 - Package No. 5 plus 2 Cleveland #10-35 master cylinders. (Wt. approx. 34 lbs.) A w/McCreary Air Trac Tires & Tubes P/N 06-01300 ........................... $3,609.00 B w/G.Year Flight Custom II Tires & Tubes P/N 06-01400 ........................... $3,728.00 PACKAGE NO. 7 FOR DEFIANT Includes 2 Cleveland 6.00-6 magnesium wheels & brakes (P/N 199133X) plus (2) 6.00-6 McCreary 6 ply tires & tubes plus 2 master cylinders. P/N 06-01500 ........................... $1,987.00
Aeroshell #22 grease is recommended for lubrication of Cleveland wheel bearings and is also applicable to other similar wheel bearings. Meets Mil-G-81322. 14 oz. tube ..............P/N 08-05490 ........$14.65
244
W51LT/LXT
MMHE6B
CM WP
The W51LT/LXT is a 5 wheel with a 4.775 width with an additional 1.23 inch caliper spacing. Bearing spacing is 3.084 and axle spacing is 1.00. The total weight of this wheel and brake assembly is 9.2 Lbs. The bearing axle diameter is 1.25. Torque rating is 4266 in-lb for the W51LT and is 6143 in-lb for the W51LXT. W51LT is recommended for Cozy Mark IV and the W51LXT is used on the Glasair. W51LT .............................. P/N 06-00079 .............. $556.00 W51LT w/axles ................. P/N 06-00568 .............. $696.50 W51LXT ............................ P/N 06-00412 .............. $664.00 W51LXT w/axles ............... P/N 06-00569 .............. $769.50
The MHE6B E SERIES is a 6 wheel with 5.375 width with an additional 1.39 inch caliper spacing. Bearing spacing is 2.71 and axle spacing is 0.68. The total weight of this wheel and brake assembly is 5.8 lbs. The bearing axle diameter is 1.25. Use on various light support aircraft. Torque Rating (@450 PSI): 2085 in-lb. Order axles separately. MHE6B.............................. P/N 06-00444 ...............$543.00 MHE6BSC......................... P/N 06-00443 ...............$543.00
ME HA AP
W600XT
WE51
The WE51 is a 5 wheel with 4.3 width with an additional 1.39 caliper spacing. Bearing spacing is 3.27 and axle spacing is 0.945. The total weight of this wheel and brake assembly is 7.5 lbs. The bearing axle diameter is 1.25. Torque Rating (@450 PSI): 2085 inlb. Any 500X5 tire and tube combination can be used with this tire. WE51 ................................ P/N 06-00445 .............. $513.00 WE51 w/axles ................... P/N 06-00570 .............. $661.00
The W600XT is a 6 wheel with 6.3125 width with an additional 1.37 caliper spacing. Bearing spacing is 3.42 and axle spacing is 1.78. The total weight of this wheel and brake assembly is 11.9 lbs. The bearing axle diameter is 1.50. Torque Rating (@450 PSI): 6441 inlb. Static Capacity: 1860 lbs. Load Limit: 5580 lbs. Order axles separately. W600XT ............................ P/N 06-00413 .............. $673.00
LG EP CS
MH6B
W51L
MATCO mfg produces a superior 5 wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses 1.25 TAPER/ROLL bearings. The W51L is a 5 wheel with 4.6 width with an additional 1.23 caliper spacing. Bearing spacing is 3.084 and axle spacing is 1.285. The total weight of this wheel and brake assembly is 6.6 lbs. The bearing axle diameter is 1.25. W51L................................. P/N 06-01710 ..............$434.00
The MH6B is a 6 wheel with 5.375 width with an additional 1.24 caliper spacing. Bearing spacing is 2 and axle spacing is 2. The total weight of this wheel and brake assembly is 4.4 lbs. The bearing axle diameter is 0.625. The NEW MH6B is now produced as a CNC spun wheel with a Tenzalloy hub center and a NEW higher torque caliper. Torque Rating (@450 PSI):1540 in-lb. StaticCapacity:660 lbs. MH6B ................................ P/N 06-16810 .............. $459.00 MH6B-S ............................ P/N 06-00447 .............. $438.95
IN EL AV
W50CC
W60
The W50CC is a 5 wheel with a 3.7 width with an additional 1.75 caliper spacing. Bearing Spacing is 3.0 and axle spacing is 2.5. The total weight of this wheel and brake assembly is 4.5 lbs. excluding the axle assembly. This wheel uses a Lamb type tire which is 11x400x5 and requires a tube with a 90 degree valve stem. Torque Rating (@450 PSI): 1540 in-lb. W50CC ............................. P/N 06-00470 ...............$469.95
MATCO mfg produces a superior 6 wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses 1.25 TAPER/ROLL bearings. The W60 is a 6 wheel with 4.375 width with an additional 1.23 caliper spacing. Bearing spacing is 2.5 and axle spacing is 1.25. The total weight of this wheel and brake assembly is 7.1 lbs. The bearing axle diameter is 1.25. W60............................... P/N 06-02160 .................. $439.00
TO PS BV
Matco mfg produces a superior inch wheel and brake assembly for use with aircraft requiring less than lbs per wheel. This model uses inch bearings. This is a W60CCD .625 is a 6 inch wheel. The bearing axle diameter is .625 inches. P/N 06-00938...................................... $219.95
W60CC .625
Matco mfg produces a superior 6 inch wheel and brake assembly for use with aircraft requiring less than 660 lbs per wheel. This model uses 0.75 inch BALL bearings. (Check the product comparison table for other bearing and caliper configurations). The W60CCD.75 is a 6 inch wheel with 4.38 inch width with an additional 1.75 inch caliper spacing. Bearing spacing is 3 inches and axle spacing is 1 inches. The total weight of this wheel and brake assembly is 5.55 pounds. The bearing axle diameter is 0.75 inches. This is a set of one wheel and one brake. P/N 06-00939 .............$219.95
W60CC .75
245
ME HA AP LG EP CS IN EL AV TO PS BV
NOTE: Our prices include 2 wheels and 2 brakes (set) Matco Part No Aircraft Spruce Weight (lbs.) Tire Size Tire Type Price
246
CM WP
P/N 06-00471 P/N 06-00485 P/N 06-00486 P/N 06-00489 Matco P/N Our P/N Bearing Axle Dia. Load Limit (lbs.) Static Cap.(lbs.) Brake Reline Kit Weight (lbs.) Tire Size Tire Type Price W50CC 06-00470 0.625BB 2000 660 BRL-2 4.57 5 11.0 x 4.05 $469.95 W50CC.62D 06-00471 0.625BB 2000 660 BRL-3 4.82 5 11.0 x 4.05 $539.00 W50CC.75 06-00472 0.75BB 2000 660 BRL-2 4.57 5 11.0 x 4.05 $469.95 W50CC.75D 06-00473 0.75BB 2000 660 BRL-3 4.82 5 11.0 x 4.05 $539.00 W50CCD.75 06-00474 0.75BB 2000 660 2 BRL-2 5.35 5 11.0 x 4.05 $595.00 W50DCC.62 06-00475 0.625BB 2000 660 2 BRL-2 5.35 5 11.0 x 4.05 $595.00 W51CC 06-00476 0.625BB 2000 660 BRL-2 4.57 5 5.00-5 $469.95 W51CC.62D 06-00477 0.625BB 2000 660 2 BRL-3 4.82 5 5.00-5 $539.00 W51CC.75 06-00478 0.75BB 2000 660 2 BRL-2 4.57 5 5.00-5 $539.00 W51CC.75D 06-00479 0.75BB 2000 660 2 BRL-3 4.82 5 5.00-5 $539.00 W51CCD.75 06-00480 0.75BB 2000 660 2 BRL-2 5.35 5 5.00-5 $595.00 W51DCC.62 06-00481 0.625BB 2000 660 2 BRL-2 5.35 5 5.00-5 $595.00 W60CC 06-00482 0.625BB 2000 660 BRL-2 5.55 6 up to 6.00-6 $469.95 W60CC.75 06-00483 0.75BB 2000 660 BRL-2 5.55 6 up to 6.00-6 $469.95 W600CC 06-00484 0.625BB 2000 660 BRL-2 5.85 6 any 6 $489.95 W600CC.75 06-00485 0.75BB 2000 660 BRL-2 5.85 6 any 6 $489.95 W60CCD.62 06-00486 0.625BB 2000 660 2 BRL-2 5.55 6 up to 6.00-6 $595.00 W60CCD.75 06-00487 0.75BB 2000 660 2 BRL-2 5.55 6 up to 6.00-6 $595.00 W600CCD.62 06-00488 0.625BB 2000 660 2 BRL-2 5.85 6 any 6 $595.00 W600CCD.75 06-00489 0.75BB 2000 660 2 BRL-2 5.85 6 any 6 $595.00 W60CC.75R 06-00490 0.75TRB 2000 1185 BRL-2 5.85 6 up to 6.00-6 $489.95 W600CC.75R 06-00491 0.75TRB 2000 1185 BRL-2 6.15 6 any 6 $565.00 W60CCD.75R 06-00492 0.75TRB 2000 1185 2 BRL-2 6.25 6 up to 6.00-6 $616.00 W600CCD.75R 06-00493 0.75TRB 2000 1185 2 BRL-2 6.55 6 any 6 $623.00 W80CC-Z 06-00494 0.625BB 2000 660 BRL-1 8.75 6 4.80-8 $485.95
ME HA AP LG EP CS IN EL AV TO PS BV
247
Upgrade your experimental aircraft and save 6 to 10 Lbs with high performances BERINGER wheels and brakes. This complete wheels and brake set is designed to mount directly, replacing original equipment. Wheels are aluminum red anodized, machined from billet on CNC, with O-rings for Tubeless mounting. Brake calipers use sintered metallic pads and stainless steel pistons for increased life time. The kit includes: 2 main wheels with brake and stainless steel discs, tires (mounted on rims and pressure tested), axles, master cylinders, fluid reservoirs, parking brake valve, anti-lock regulator, stainless steel brake lines and detailed mounting procedure. Aircraft Model Description Part No. Price
Complete package as described above, with Michelin Aviator Van's RV6, 7, 9 06-01089 $3,875.00 Tires 5,00-5", 10ply Tubeless and 4 master cylinders Van's RV6A, 7A, 9A Complete package as described above, with Michelin Aviator 06-01090 $3,875.00 Tires 5,00-5", 10ply Tubeless and 4 master cylinders Complete package as described above, with Michelin Aviator 06-01091 $3,249.00 Tires 5,00-5, 10ply Tubeless and 2 master cylinders Visit our website for additional models.
num wheels. 2 - 5 calipers and 4-1/2 rotors. all lines and fittings. axles included 5/8 or 3/4. 5/8 precision ball bearings are 800 GVW. 3/4 precision ball bearings are 1100 GVW. Note: To be run tubeless, but tubes may be used. 3-3/4 lbs. per side wheel and brake. 6S X 5 - 5 Wide Wheel X 6 Diameter ........... P/N 06-01269 .....$588.00 6S X 6 - 6 Wide Wheel X 6 Diameter ........... P/N 06-01270 .....$588.00 5 BILLET ALUMINUM WHEEL - 5B X 5 W/ 6-3/8 Brake Assembly. kit includes. 2 - 5 billet aluminum wheels. 2 - calipers and 6-3/8 rotors. all lines and fittings. 1-1/4 precision ball bearings 1800 GVW per set. 3/4 precision ball bearings 1500 GVW per set. Note: Retro fits Cleveland brakes. Uses a tube with 90` valve stem ........ P/N 06-01273 .....$675.00
Van's RV8
Heavy duty hydraulic external disk brakes for use with all Hegar wheels. Black anodized billet aluminum, 1/8 thick steel disk. Set includes 15 feet of high pressure nylon brake line, fluid with bleeder kit, and fittings. Axles and master cylinders must be ordered separately. Specify 5/8 or 3/4 bearings. P/N 06-00326 .........................$442.95
Order the type of master cylinder(s) & actuator best suited to your aircraft. Standard keyed axles for all aircraft, except Quicksilver. Heel-Operated Master Cylinder....................... P/N 06-00328 ......$67.75 Joystick-Mounted Master Cylinder .................. P/N 06-00329 ......$86.75 Foot Linkage.................................................... P/N 06-00330 ......$99.95 Hand Linkage .................................................. P/N 06-00331 ......$90.25 Axles, 5/8 Standard, Set Of 2 ........................ P/N 06-00332 ......$36.85 Axles, 5/8 Quicksilver Set Of 2.................... P/N 06-00333 ......$63.25 Axles, 3/4 Standard, Set Of 2 ........................ P/N 06-00334 ......$36.10 Dual 7 T-Lever Master Cylinder Assy. 1/2 .... P/N 06-01280 ....$136.95 Dual 7 T-Lever Master Cylinder Assy. 5/8 .... P/N 06-01597 ....$136.95 Dual 7 T-Lever Master Cylinder Assy. 3/4 .... P/N 06-01598 ....$136.95
A quality built 6 wheel & brake designed for the homebuilt and ultralight flyer. Rated up to 2500 lbs. gross weight, these wheels easily accommodate 800 series tires for off-field landings and 600 series tires for low profile and an increase in speed. The brake disks made of cast iron provide for longevity and superior heat dissipation, while using Rapco brake pads to finish the system. The axles are 1-1/4 aluminum and use a 1-3/8 square bolt pattern. The kit does not include master cylinders, brake fluid line or axles and nuts. Each JDM brake and wheel including the axle weigh only 10.3 lbs. Kit includes 1 wheel and 1 brake. 6 wheel & Brake Assembly* (1-1/4 Tapered Roller Bearing) P/N 06-03475 .....$505.95 ea 1-1/4 Axle & Castle Nut.............................P/N 06-03480 .......$96.00 ea
True-Lock aviation fastener systems reduce premature wear on your wheel-end assembly parts (brakes, bearings, axles, including tires and wheels). The True-Lock system eliminates the conventional axle nut systems inherent inferior torque setting characteristics imposed by the castle nut and cotter pin (end-play). True-Lock is the only patented aviation wheel fastener system in the world that has been awarded an STC (Supplemental Type Certificate) by the FAA for axle nut technology. True-Lock LLC holds over 1,000 FAA certifications for aviation fastener design. All True-Lock fastener systems are guaranteed for the life of your aircraft and pay for themselves over time by reducing downtime and fewer replacement parts. So, If you want a wheel fastener system for your aircraft that sets the industry standard for vibration mitigation and cost reduction, then True-Lock is what you need. The True-Lock fastener system is the next generation of fastener technology: FAA Certification on over 1,000 aircrafts. Significantly increases safety and reliability. Reuseable & cost effective. Maintenance Free - requires no cotter pins or safety wire!
248
CM WP
BRL-1
Matco Part No. BRL-1* BRL-2* BRL-3* BRL-6* BRL-323
BRL-2
Our Part No. 06-00571 06-00572 06-00573 06-00574 06-00575
BRL-3
BRL-6
BRL-323
Price each $29.50 $28.50 $33.70 $59.85 $242.00
Azusalite wheels are made from engineering grade Nylon which combines high tensile and compressive strengths and good impact resistance. Excellent for many homebuilt and ultralight aircraft applications since they weigh 60-70% less than aluminum wheels. Azusalite wheels are offered in 4, 5 and 6 models. Replacement parts and unlisted accessories available on request. AZUSALITE 5 WHEEL Used as the main wheels on the Mohawk ultralight, this 5 inch wheel features 5/8 I.D. sealed ball bearings and uses a 4.10 / 3.50 x 5 or 5.00 x 5 tire and tube. P/N 06-02500 .......... $21.85
ME HA AP LG EP CS IN EL AV TO PS BV
AZUSALITE 4 WHEEL A 4 inch Azusalite wheel featuring 5/8 sealed ball bearings. Uses a 4.10 / 3.50 x 4 tire and tube. P/N 06-02600 .......... $16.75 AZUSALITE 6 WHEEL A 6 inch Azusalite wheel which comes complete with 5/8 sealed ball bearings. Uses a 4.10 / 3.50-6 or a 6.00-6 tire and tube. .................................................... P/N 06-02700 .......... $27.50 AZUSA TIRES & TUBES (SAWTOOTH TREAD)
4 .10 / 3.50 x 4 Tire & Tube P/N 06-02800 .....$19.75 Ea 4 .10 / 3.50 x 5 Tire & Tube P/N 06-02900 .....$24.25 Ea 4.10 / 3.50 x 6 Tire & Tube P/N 06-03000 .....$24.25 Ea
Matco Part No. MSCNNR4/035 MSC261P MSC262P MSC264P MSC268P MSC268P-04X01 MSC269P MSCNNR2/026 MSC161P MSC164P MSC168P MSC169P
Description Nylon II Tube .25 Ferrule and Nut Union, Brass Fitting T-Fitting, 1/8 NPT - 1/4 Compression Parker #X164p-4 Straight fitting, 1/8 NPT - 1/4 Compression Straight Fitting 1/16 Brass Elbow, 90 1/8 NPT - 1/4 Compression Nylon II Tube, .125 1/8 Ferrule and Nut T-Fitting, 1/8 NPT - 1/8 Compression Straight Fitting, 1/8 NPT - 1/8 Compression Brass Elbow, 90, 1/8 NPT - 1/8 Compression
Price $1.15 $1.78 $2.53 $5.90 $2.10 $8.24 $2.50 $0.63 $9.85 $3.85 $4.84
This top quality wheel and brake set is excellent for use on high-performance ultralights. Set incl.: 2 aluminum wheels & brakes with 5/8 bearings, 2 axles, 2 spacers, 2 brake bleeder seats & valves, 4 brake line fittings, 12 ft. of 1/4 dia. x .035 wall brake line & 1 vertical master cylinder. P/N 06-16800 ..........$598.00 Same as set #06-16800 except with 2 vertical master cylinders P/N 06-16840 ..........$697.00 Same as set #06-16800 except with 1 laydown style master cylinder P/N 06-16850 ..........$648.00 Same as set #06-16800 except with 2 laydown style master cylinders P/N 06-16860 ..........$697.00 AVAILABLE SEPARATELY: 6 Wheel & Brake .......................................P/N 06-16810 ..........$459.00 5 Nose wheel with 5/8 Bearings ..............P/N 06-16820 ............$79.50 A-4 Axle, 9.75 Long, 5/8 Dia....................P/N 06-16830 ............$43.90 Nose Wheels are aluminum red anodized, machined from billet on CNC, with O-rings for Tubeless mounting. Static capacity: 1440 Lbs (with appropriate tire). Aluminum axle for 5/16 bolt diameter. The kit includes: 1 nose wheel with tire (mounted on rim, pressure tested) and 1 aluminum axle.
See www.aircraftspruce.com for more information and available models.
Description Nose wheel 5 with tire 11x4.00-5 8ply and aluminum axle Vans RV6A, Nose wheel kit as described above, with 7A, 9A Michelin Aviator Tire 5.00-5 10ply Tubeless Weight: 8.9 Lbs Lancair 320, 360 Nose wheel kit as described above, with Lamb (retractable LG) Tire 11x4.00-5, 8ply Weight: 5.9 Lbs Lancair legacy Nose wheel kit as described above, with Lamb (retractable LG) Tire 11x4.00-5, 8ply Weight: 5.9 Lbs Glasair III (retract- Nose wheel kit as described above, with Lamb able LG) Tire 11x4.00-5, 8ply Weight: 5.9 Lbs Nose wheel kit as described above, with Zenair CH601 Michelin Aviator Tire 5.00-5 10ply Tubeless Weight: 9 Lbs Aircraft Model PN 06-01482 06-01097 06-01098 06-01099 06-01101 06-01102 Price $730.00 $720.00 $558.00 $558.00 $558.00 $720.00
actuating arm, 5/8 mounting hole, Description Price Anchor Style Brake #2208 $36.90 Round Style Brake #2270A $29.85 Brake Assy. 2272A (Right) $34.75 Brake Assy. 2272A (Left) $37.75 Brake Arm #2263 $1.29 Spring #2264 $0.62 Cam #8235 $4.80 Platform #2259A $6.25 Lined Shoes (1/side) #2260 $18.50
These 5 brakes are P/N Description used on Azusa #1175 wheels only. Features a 06-03450 Round Style Brake #2530 Brake Arm #2537 round aluminum back- 06-03455 Spring #2539 ing plate and actuating 06-03460 Cam #2533 arm which allows for 8 06-03465 06-03470 Lined Shoes (1/side) #2538 positions.
249
These master cylinders are the perfect choice for all Grove brake systems as well as use with other major brands that require a high pressure master Clevis End3/16 cylinder. Consider the following when selecting the hole, 1/4 wide slot proper master cylinder for your aircraft: 1.The style (with or without integral reservoir, etc.)
Eye Bolt End3/16 hole, 1/2 head diameter
Quality machined from 6061 billet. Top is retained by snap ring with O-ring seal. Supplied with vented 1/8 NPT cap plug. Anodized for corrossion resistance. 2.75 high 1.75 diameter Holds 2.42 fluid ozs. Weighs 3.6 ounces.
2.The pin-to-pin lengththis is the length between the upper and lower attach holes. 3.The attach type for the upper end (clevis, or eye bolt)
Eye Bolt End - 3/16 4.The attach type for the lower end (cross drilled, slotted, etc.) hole, 3/8 head diameter
Designed to attach to firewall or other remote location. Adequate capacity to serve both master cylinders. Outlet has 1/8 female NPT thread at bottom of reservoir. 067-054 ....... P/N 06-00819..... $39.95 Lower Attachment Inline Inline 90 Offset 90 Offset 90 Offset 90 Offset Inline 90 Offset 90 Offset Inline Inline 90 Offset Inline Weight 5.9 oz. 6.2 oz. 5.9 oz. 6.2 oz. 5.9 oz. 6.2 oz. 6.2 oz. 6.2 oz. 5.9 oz. 6.2 oz. 5.9 oz. 5.9 oz. 5.9 oz. Weight 5.9 oz. 5.9 oz. 6.2 oz. 6.2 oz. Price $158.85 $158.50 $159.50 $159.50 $168.75 $168.75 $168.75 $168.75 $168.75 $168.75 $168.75 $169.95 $168.75 Price $168.75 $168.75 $168.75 $168.75
Normal installation requires two (one for each master cylinder.) Supplied with 1/8 NPT fitting. Attaches directly to your master cylinder. 1.98 high; 1.38 diameter Holds 1.10 fluid ounces Weighs 1.5 ounces. 067-050 P/N 06-00818 ....$26.75
Displacement = 0.429 cu-in Stroke = 1.4
Grove P/N 670-1 670-2 670-3 670-4 670-8 670-13 670-14 670-15 670-16 670-17 670-18 670-19 670-20 Grove P/N 671-20 671-21 671-22 671-23
Our P/N 06-00594 06-00866 06-00104 06-00869 06-01286 06-00871 06-00872 06-00596 06-00873 06-00597 06-00875 06-00877 06-00878 Our P/N 06-00880 06-00882 06-00884 06-00887
Pin-to-Pin Length 7.5 8.0 7.5 8.0 7.25 8.0 8.0 8.0 7.5 8.0 7.5 7.5 7.5 Pin-to-Pin Length 7.5 7.5 8.0 8.0 Pin-to-Pin Length 5.0 5.5 6.0 Pin-to-Pin Length 7.5 8.0 7.5 7.5 7.5 7.5 Pin-to-Pin Length 7.5 8.0 7.0
Upper Attachment Clevis Clevis Clevis Clevis Clevis 3/8 Eye Bolt 3/8 Eye Bolt 1/2 Eye Bolt 1/2 Eye Bolt 1/2 Eye Bolt 1/2 Eye Bolt 3/8 Eye Bolt 3/8 Eye Bolt Upper Attachment 1/2 Eye Bolt 3/8 Eye Bolt 1/2 Eye Bolt 3/8 Eye Bolt Upper Attachment Clevis Clevis Clevis Upper Attachment Clevis Clevis 1/2 Eye Bolt 1/2 Eye Bolt 1/2 Eye Bolt 1/2 Eye Bolt Upper Attachment Clevis Clevis Clevis
Lower Attachment Cross Drilled Cross Drilled Cross Drilled Cross Drilled LowerAttachment Cross Drilled Cross Drilled Cross Drilled Lower Attachment Cross Drilled Cross Drilled Left Offset Right Offset Slotted 90 Slotted Inline Lower Attachment Cross Drilled Cross Drilled Cross Drilled
P/N 671-21
P/N 672-1
Weight 5.9 oz. 6.2 oz. 5.9 oz. 5.9 oz. 5.9 oz. 5.9 oz.
EL AV TO PS
Right Offset Tab 3/16 hole drilled 90 to fitting
Slotted -0.090 slot inline with fitting. 3/16 hole drilled 90 to fitting.
BV
Reservoir Volume 2.0 cu-in Displacement = .368 cu-in Stroke = 1.2 P/N 675-1
All master cylinders have a 5/8 bore, 1/8 NPT outlets, are rated at 1,000 psi for use with MIL-H-5606 hydraulic fluid.
250
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
From the chart below, select the proper static load rating, kinetic energy rating and brake torque for your aircraft. Choose from Aluminum or Magnesium Magnesium wheels weigh less than aluminum, but aluminum is more corrosion resistant. Both metals have similar strengths.
60 series but with heavier discs for greater kinetic Available in Aluminum or Magnesium energy and larger calipers for greater braking torque.
WHEEL NO.
STATIC DISC WEIGHT KINETIC BRAKING PISTON PRICE/ LOAD THICKCALIPER BRAKE AXLE DIA. LBS. ENERGY TORQUE DIA. SET (SEE RATING NESS NO. PAD NO. (INCHES) (SEE REF. FT-LBS. INCH-LBS. (INCHES) REF. 2) POUNDS (INCHES) 1) FOUR INCH WHEELS AND BRAKES 700 700 1,285 1,285 800 800 1,285 1,285 1,285 1,285 1,285 1,285 1,750 1,750 1,200 1,200 1,250 1,250 1,250 1,750 1,750 1,750 1,750 2,200 2,200 72,000 72,000 118,164 118,164 118,164 118,164 162,315 162,315 205,146 205,146 246,175 246,175 186,792 186,792 168,934 168,934 168,935 168,934 186,792 186,792 280,188 186,792 280,188 280,188 280,188 0.160 1,384 39-1A 1x1.250 0.160 1,832 39-2A 1x1.438 FIVE INCH WHEELS AND BRAKES 0.190 2,364 30-1A 1x1.500 0.190 2,364 30-1M 1x1.500 0.190 2,364 30-1A 1x1.500 0.190 2,364 30-1M 1x1.500 0.250 3,283 31-2A 2x1.250 0.250 3,283 31-2M 2x1.250 0.313 3,283 31-3A 2x1.250 0.313 3,283 31-3M 2x1.250 0.375 4,345 32-4A 2x1.438 0.375 4,345 32-4M 2x1.438 SIX INCH WHEELS AND BRAKES 0.250 5,052 36-2A 1x2.000 0.250 5,052 36-2M 1x2.000 0.190 3,947 31-1A 2x1.250 0.190 3,947 31-1M 2x1.250 0.190 3,868 30-7M 1x1.750 0.190 3,947 31-1M 2x1.250 0.250 5,219 32-2M 2x1.438 0.250 7,735 35-2A 2x1.750 0.375 7,735 35-4A 2x1.750 0.250 7,735 35-2A 2x1.750 0.375 7,735 35-4A 2x1.750 0.375 7,735 37-4A 2x1.750 0.375 7,735 37-4M 2x1.750 66-106 66-106 66-106 66-106 66-106 66-106 66-111 66-111 66-111 66-111 66-111 66-111 66-105 66-105 66-111 66-111 66-106 66-111 66-111 66-106 66-106 66-106 66-106 66-105 66-105 0.75 0.75 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 4.05 4.16 7.10 6.10 6.60 5.60 7.60 6.45 7.90 6.80 8.30 7.20 10.50 9.20 9.20 8.10 7.43 7.64 7.90 11.15 11.82 9.90 11.82 14.25 12.25 $508.00 $497.95 $633.00 $671.00 $853.00 $664.00 $705.00 $689.00 $713.00 $743.00 $767.00 $822.00 $846.00 $898.00 $853.00 $889.00 $857.00 $857.00 $885.00 $954.00 $998.00 $1,065.00 $1,002.00 $1,361.00 $1,484.00
40-101 06-00858 40-102 06-00859 50-101 50-201 51-101 51-201 55-112 55-212 56-113 56-213 57-124 57-224 60-162 60-262 61-111 61-211 65-207 65-211 65-222 66-152 66-154 66-252 66-254 67-174 67-274 06-00094 06-00860 06-00589 06-00862 06-00863 06-00864 06-00095 06-00867 06-00096 06-00870 06-00101 06-00798 06-00590 06-00799 06-00879 06-00881 06-00883 06-00885 06-00886 06-00888 06-00890 06-00892 06-00894
40-3A 40-1A 50-1A 50-1M 51-1A 51-1M 55-1A 55-1M 56-1A 56-1M 57-1A 57-1M 60-1A 60-1M 61-1A 61-1M 65-1M 65-1M 65-5M 60-1A 60-5A 60-1M 60-5M 67-1A 67-1M
251
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Genuine Aircraft Quality! Cast from aerospace grade materials Precision CNC Machined Timken Tapered Roller Bearings Felt Grease Seals
GROVE P/N 49-1A 49-3A 59-1A 59-1M 59-2A 59-2M 69-1A 69-1M
OUR P/N 06-00843 06-00842 06-00102 06-00911 06-00912 06-00913 06-00103 06-00915
WHEEL SIZE 4 Inch 4 Inch 5 Inch 5 Inch 5 Inch 5 Inch 6 Inch 6 Inch
STATIC AXLE LOAD WEIGHT PRICE DIA. RATING 700 lbs 0.75 1.98 lbs $184.95 700 lbs 0.75 1.87 lbs $176.50 1,285 lbs 1.25 3.90 lbs $257.00 1,285 lbs 1.25 2.90 lbs $308.95 800 lbs 1.25 3.40 lbs $258.95 800 lbs 1.25 2.40 lbs $306.95 1,750 lbs 1.50 6.00 lbs $307.95 1,750 lbs 1.50 4.80 lbs $352.95
TUBELESS WHEELS
Perfect for oversized tires such as the 26 Goodyear tire. Durable all metal valve stem. O-Ring seal between wheel halves. Axle Diameter 1-1/4 Static Load Rating 1,250lbs P/N 06-00916.........$938.00
APPROVED MODELS INCLUDE: J-3, J-4, J-5, PA-11, PA-12 PA-14, PA-15 PA-16, PA-17PA-18, PA-19 PA-20 Good news for owners of early Piper aircraft. Say good-bye to brake expander tube problems forever! No more soft brake pedal Easy Installation Improved braking and ground handling Maintain the classic cub look by installing modern disc brakes on your existing 800x4 wheels and tires. Use your existing wheels, tires, tubes, master cylinders and brake lines. STC Kit comes complete with all parts, special tools and STC documentation. Installation requires only standard hand and rivet tools. No modifications are required to be made on the gear leg, or any other part of the aircraft. P/N 06-00837 ........................ $799.95
AXLE SHIMS
Reduce Tire Wear Improve Ground Handling
Precision CNC machined from 2024T3 aluminum with clear anodized protective finish Weight 0.92 lbs. 1.25 diameter Static Load Rating 1,285 lbs.
Same as the 500x5 standard axle but with 1 extension to attach wheel pant. End tapped for 1/4-28 screw Weight 0.95lb.
Use with Grove 50, 51, 52, 55, 56, 57, & 58 and Cleveland 500x5 P/N 06-00917 ....$52.50 Precision CNC machined from 2024-T3 aluminum with clear anodized protective finish Weight 1.28 lbs. 1.50 diameter Static Load Rating 1,750lbs
Use with Grove 50, 51, 52, 55, 56, 57, & 58 and Cleveland 500x5 wheels. P/N 06-00601 .............$59.50
Use with Grove 60, 61, & 66 and Cleveland 600x6 wheels P/N 06-00919 ............ $76.50 Use with Grove 60, 61, & 66, and Cleveland 600x6 wheels. P/N 06-00602 .............. $82.75 Use with Grove 40-1A Wheel Weight 0.40lbswheels. P/N 06-00921 ...................$54.75 Use with Grove 40-3A Wheel Weight 0.38lbs P/N 06-00922 ... $56.85
400X4 AXLES
Same construction as the above axles, but with 1.25 diameter Use with Grove 65 Series Wheels.
Solid 7075-T6 aluminum with clear anodized finish. Diameter 0.75 Static Load Rating 700 lbs.
With wheel pant stub .... P/N 06-00923 .. $77.00 Without stub ................. P/N 06-00924 .. $73.85
252
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Main Wheel Standard Price Chrome Main Wheel Standard Price Chrome Price Aircraft Model Assy Disc Each Disc Assy Disc Each Disc Each 660x6 40-75B 164-15A $173.95 164-115A Homebuilts 500x5 40-78B 164-17 $164.95 164-117 $285.95 Cessna 207, T207 600x6 40-75D 164-36 $174.00 164-136 Homebuilts 600x6 40-59A 164-75 $163.95 164-175 $198.95 Cessna Caravan 1, & 208B 40-179 164-22201 $268.00 --General (High Energy) 40-151A 164-08500 $169.85 ----Cessna 210C 600x6 40-21 164-9 $149.90 164-109 General (Increased Energy) 40-230 164-09900 $159.95 ----Cessna 210 series P210, T210 600x6 40-75B 164-15A $173.95 164-115A Aerotek (Pitts) 600x6 40-75B 164-15A $173.95 164-115A 500x5 40-78B 164-17 $164.95 164-117 $285.95 Cessna 210N, P210N S-1 Series, S-2A Cessna 336 Series 600x6 40-67 164-7 $159.95 164-107 Bonanza 33, 35, 36 600x6 40-83 164-02505 $168.50 164-125B $797.00 1963-1965 600x6 40-75B 164-15A $173.95 164-115A Bellanca Citabria,Decathlon 600x6 40-28D 164-5 $145.95 164-105 $430.95 Gulfstream AA-1, A, B, AA-5, 600x6 40-86A 164-20 $127.95 164-120 Bellanca Champ 600x6 40-78B 164-17 $164.95 164-117 $285.95 Gulfstream AA-1,A,B,AA-5, 600x6 40-88C 164-20 $127.95 164-120 Viking 300A 600x6 40-75E 164-15A $173.95 164-115A $398.50 AA-5B, TR2 600x6 40-75E 164-15A $173.95 164-115A Cessna 150C 600x6 40-57 164-5 $145.95 164-105 $430.95 Helio H-295, 395, 600x6 40-75D 164-36 $174.00 164-136 Cessna 150D,E 500x5 40-78 164-17 $164.95 164-117 $285.95 391 600x6 40-97D 164-26A $127.95 164-126A Cessna 150F,G,H,J 600x6 40-97A 164-26A $127.95 164-126A $232.95 Maule M4, M5 Series 600x6 40-24 164-9 $149.90 164-109 Cessna 150K 600x6 40-97A 164-26A $127.95 164-126A $232.95 Mooney M20A, M20B Mooney 20C 600x6 40-86 164-20 $127.95 164-120 Cessna A150K, F150, FA150 600x6 40-113 164-40 $149.50 164-140 $235.95 600x6 40-24 164-9 $149.90 164-109 Cessna 152, F152, FA152 600x6 40-113 164-40 $149.50 164-140 $235.95 Mooney 20D, E 600x6 40-86 164-20 $127.95 164-120 600x6 40-97A 164-26A $127.95 164-126A $232.95 Mooney 20D, F,G,J,K Cessna 172 600x6 40-28 164-5 $145.95 164-105 600x6 40-113 164-40 $127.95 164-140 $235.95 Piper PA22-108 600x6 40-58 164-9 $149.90 164-109 Cessna 177,177RG, F177RG 600x6 40-113 164-40 $149.50 164-140 $235.95 Piper PA24-180,250 Piper PA24-260 600x6 40-84 164-19 $149.90 164-119 Cessna 177A, B 600x6 40-97A 164-26A $127.95 164-126A $232.95 Piper PA25 600x6 40-84A 164-33 $176.95 164-133 600x6 40-75B 164-15A $173.95 164-115A $398.50 Piper PA28 Series Cherokee/Warrior 600x6 40-28 164-20 $127.95 164-120 Cessna 180 600x6 40-75D 164-63 --164-163 --Piper PA32 Series 600x6 40-120C (1)164-21600 $173.95 --600x6 40-66 164-7 $159.95 164-107 $285.95 (1) Heavy duty 600x6 40-120(1)164-21600 $173.95 --Cessna 182H, J, K, L, M, N 600x6 40-97A 164-26A $127.95 164-126A $232.95 Archer 600x6 40-86 164-20 $127.95 164-120 Cessna 182N 600x6 40-113 164-40 $149.50 164-140 $235.95 Pathfinder 600x6 40-86B 164-20 $127.95 164-120 Cessna 182J, K, L, N, 600x6 40-97A 164-26A $127.95 164-126A $232.95 Cherokee 600x6 40-58 164-9 $149.90 164-109 600x6 40-32 164-7 $159.95 164-107 $285.95 Cherokee/Arrow 600x6 40-84 164-19 $149.90 164-119 Cessna 185, A, B 600x6 40-66 164-7 $159.95 164-107 $285.95 600x6 40-86 164-20 $127.95 164-120 Cessna 185C, D, E 600x6 40-75B 164-15A $173.95 164-115A $398.50 Dakota 600x6 40-86B 164-20 $127.95 164-120 Cessna A185E 1966 & Up 600x6 40-75B 164-15A $173.95 164-115A $398.50 Piper PA32 Series 600x6 40-90A 164-23 $168.95 164-123 1969 & Up 600x6 40-75D 164-36 $174.00 164-136 $285.95 Piper P34 Series 600x6 40-90A 164-23 $168.95 164-123 1967, 1968 600x6 40-66 164-7 $159.95 164-107 $285.95 500x5 40-78B 164-17 $164.95 164-117 Cessna 188, A188 600x6 40-75B 164-15A $173.95 164-115A $398.50 Piper PA38-112 600x6 40-90A 164-23 $168.95 164-123 600x6 40-67 164-7 $159.95 164-107 $285.95 Piper PA44 Cessna 205, 205A 600x6 40-113A 164-43 $157.95 164-143 600x6 40-75B 164-15A $173.95 164-115A $398.50 Rockwell Int. 112, 112A, B 112B, TC, TCA114 600x6 40-75H 164-15A $173.95 164-115A Cessna 206, U206A, 600x6 40-75 164-15A $173.95 164-115A $398.50 Schweizer SGS1-34 500x5 40-78B 164-17 $164.95 164-117 TU206A & Turbo 600x6 40-74 164-7 $159.95 164-107 Cessna U206D, D & Turbo 600x6 40-75D 164-36 $174.00 164-136 $285.95 Spencer Amph. S12E 600x6 40-86 164-20 $127.95 164-120 Cessna P206, A, TP206A 600x6 40-75 164-15A $173.95 164-115A $398.50 Taylorcraft F-19 600x6 40-97E 164-26A $127.95 164-126A Cessna P206, A,B,C,D,& Turbo 600x6 40-75B 164-15A $173.95 164-115A $398.50 Varga 2150A Waco 600x6 40-97A 164-26A $127.95 164-126A Cessna P206D,E,Turbo & 600x6 40-75D 164-36 $174.00 164-136 $285.95 Super Skylane Wing Derringer 600x6 40-84 164-19 $149.90 164-119 Aircraft Model
Price Each $398.50 $285.95 --$269.95 $398.50 $398.50 $285.95 $398.50 $196.95 $196.95 $398.50 $285.95 $232.95 $269.95 $196.95 $269.95 $196.95 $430.95 $269.95 $386.95 $911.00 $51.85 ----$196.95 $196.95 $269.95 $386.95 $196.95 $196.95 $272.95 $272.95 $285.95 $272.95 $269.95 $398.50 $285.95 $285.95 $196.95 $232.95 $232.95 $386.95
172, F172, R172, FR172 172, F172, 172RG 177 177RG 180, 185 182, F182 R182, FR182, TR 182 U206-TU206 210, T210, P210
253
Aerotek (Pitts) S-1, S-2A Air Tractor AT-300, AT-301, AT-302, AT-400A Air Tractor AT602 American Citabria, Decathlon American Champ Bellanca Viking 300A Beech 77 Skipper Beech G33 CD-1272 thru CD-1304 Beech 35, A35 Thru S35 Bonanza (Heavy Duty Opt.) V35, V35B, V35BTC Bonanza 35R 45 (TY-34) Baron 95-55, 95-A55 95-B55-95-B55A, 95-B55B, 95-C55, 95-C55A C55 (TE-1 & UP) Baron D55 Baron D55A E55 (1979 and on) 56TC (TG-1 thru TG-83) 95 (Travel Air) Bonanza 35-33, 35-A33, 35-B33, 35C33, 35-C33A E33A F33, F33A, F33C 35, A35 Thru S35, 35R V35, V35B, V35BTC Bonanza 36 Britten Norman BN-2 Cessna 150A,B,C Cessna 150C 1963 Cessna 150D,E Note: Not for 500X5 wheels Cessna 150F,G,H,J,K Cessna A150, 150K, F150, FA150 Cessna F152, FA152 Cessna 172 F,G,H,I,K Cessna 172 McCauley Cessna 172, F172 Cessna 177, 177RG, F177RG Cessna 177A, B
RA164-01700 06-00618 $79.85 RA164-03006 06-00414 $191.90 RA-164-22202 RA164-00500 RA164-01700 RA164-01501 RA164-06900 RA164-02504 RA164-02706 06-01566 06-00612 06-00618 06-00616 06-00631 06-00622 06-01496 $234.90 $87.90 $79.85 $79.90 $104.95 $83.50 $119.75
RA164-02706 06-01496 $119.75 RA164-02706 06-01496 $119.75 RA164-02706 06-01496 $119.75 RA164-02706 06-01496 $119.75 RA164-02706 RA164-02706 RA164-02706 RA164-02706 RA164-02706 RA164-02706 06-01496 06-01496 06-01496 06-01496 06-01496 06-01496 $119.75 $119.75 $119.75 $119.75 $119.75 $119.75
RA164-02504 06-00622 $83.50 RA164-02505 RA164-02201 RA164-00400 RA164-00500 10-03106 06-00621 06-00118 06-00612 $88.25 $79.00 $81.90 $87.90
RA164-01600 06-00617 $79.90 RA164-02601 RA164-04000 RA164-04000 RA164-02601 RA164-30440 RA164-30195 RA164-04000 RA164-04000 RA164-30440 RA164-02601 RA164-04000 RA164-30195 06-00623 06-00628 06-00628 06-00623 06-00578 06-00579 06-00628 06-00628 06-00578 06-00623 06-00628 06-00579 $81.90 $87.90 $87.90 $81.90 $79.90 $87.75 $87.90 $87.90 $79.90 $81.90 $87.90 $87.75
RA164-30440 06-00578 $79.90 RA164-30615-1 06-00580 $79.90 RA164-01501 06-00616 RA164-00700 06-00613 RA164-30651-1 06-00580 RA164-30615-3 06-00585 RA164-30440 06-00578 RA164-04000 06-00628 RA164-30615-3 06-00585 RA164-02601 06-00623 RA164-30388 06-00584 RA164-30615-2 06-00586 RA164-00700 06-00613 RA164-01501 06-00616 RA164-03601 06-00627 RA164-00700 06-00613 RA164-03106 06-01129 $79.90 $103.95 $79.90 $87.75 $79.90 $87.90 $87.75 $81.90 $88.75 $79.90 $103.95 $79.90 $87.75 $103.95 $249.95
Cessna 180 Cessna 182, F182 Cessna R182, FR182, TR182 Cessna 182 Cessna 182, A182 Cessna T182, TR182 Cessna 182G, H, J, K, L, M, N Cessna 185 McCauley Cessna 185, A, B Cessna 185C, D, E Cessna A185E 1969 & Up Cessna A185E 1967, 1968 Cessna 188, A188
Cessna 190, 195, T310P, 310R, T310R, Q T310R, 335, 340A, 401, 401A, 401B, RA164-00806 06-01520 411, 411A, 414 RA164-00700 06-00613 Cessna 205, 205A RA164-01501 06-00616 RA164-30398 06-00588 Cessna U206, TU206 McCauley RA164-30615-3 06-00585 Cessna 206,Turbo U206A,TU206A RA164-01501 06-00616 Cessna U206D, Turbo RA164-03601 06-00627 Cessna P206, A,TP206A RA164-01501 06-00616 Cessna P206, A,B,C,D,Turbo RA164-01501 06-00616 Cessna P206D,E,Turbo,Super Skylane RA164-03601 06-00627 RA164-01501 06-00616 Cessna 207, T207 RA164-03601 06-00627 RA164-30615-3 06-00585 Cessna 210, P210,T210 McCauley RA164-30398 06-00588 Cessna 210C RA164-00900 06-00614 Cessna P210 RA164-07800 06-00633 Cessna 210 series P210, T210 RA164-01501 06-00616 Cessna 336 Series RA164-00700 06-00613 Cessna 336 Series, 1963-1965 RA164-01501 06-00616 Cessna 337 S/N337-0001 Thru 33701193 RA164-02504 06-00622 T337 S/N 337-05260 & up T337E (S/N: 337-01194 & up) RA164-02706 06-01496 D.L.F. Holdings Tango RA164-09900 06-01311 International Aviation BN-2A MK111, RA164-02706 06-01496 -2,-3 (Trislander) General Avia F1300 RA164-05700 06-00630 Gulfstream AA-1,A,B,AA-5,AA-5B,TR2 RA164-02000 06-00620 RA164-01501 06-00616 Helio H-750, H-295, 391, 395 RA164-03601 06-00627 Homebuilts RA164-07500 06-00632 Industria Unidas A-9B RA164-02800 06-00624 Maule M4, M5, M6 Series RA164-02601 06-00623 Mooney M20A, thru Super 21 RA164-00900 06-00614 Mooney M20C,E,F,G,J,K RA164-02000 06-00620 Mooney 201 RA164-02300 10-03107 Pilatus Britten-Norman Ltd. BN-2A MK111 (Trislander) RA164-02706 06-01496 BN-2A MK111-2 (Trislander) BN-2A MK111-3 (Trislander) Piper PA22-108 RA164-00500 06-00612 Piper PA23-235 RA164-00206 06-00610 RA164-03206 06-00625 Piper PA23-250 RA164-05700 06-00630 Piper PA24-180, 250 RA164-00900 06-00614 Piper PA24-260 RA164-01900 06-00619 Piper PA25 RA164-03300 06-00626 Piper PA28 Early RA164-00500 06-00612 Piper PA28R-180 Early RA164-01900 06-00619 Piper PA28 Series Comman RA164-02000 06-00620 Piper PA28-236, PA32-300, PA32-301 RA164-02300 10-03107 Piper PA30 RA164-01000 06-00615 Piper PA32, -760, -300 RA164-02201 06-00621 Piper PA32, -660, -300 RA164-21600 06-00634 Piper PA32-300, 32R, -32RT RA164-21600 06-00634 Piper PA34-200, PA34-220T RA164-02300 10-03107 Piper PA38-112 RA164-01700 06-00618 Rockwell 112, 112A,112B RA164-04300 06-00629 Rockwell Int. 112TC, TCA114 RA164-01501 06-00616 Schweizer G-164A, 450 RA164-03006 06-00414 Schweizer 6164-B, -C, -D, 450 RA164-05806 06-01128 Taylorcraft F-19 RA164-02000 06-00620 Siai-Marchetti 260SW RA164-02300 10-03107 Varga 2150A RA164-02601 06-00623 Waco RA164-02601 06-00623 Wing Derringer RA164-01900 06-00619
$174.90 $103.95 $79.90 $79.90 $87.75 $79.90 $87.75 $79.90 $79.90 $87.75 $79.90 $87.75 $87.75 $79.90 $97.90 $115.95 $79.90 $103.95 $79.90 $83.50 $119.75 $84.90 $119.75 $199.50 $79.85 $79.90 $87.75 $109.95 $102.95 $81.90 $97.90 $79.85 $83.50
$119.75
$87.90 $188.95 $169.95 $199.50 $97.90 $79.50 $93.75 $87.90 $79.50 $79.85 $83.50 $111.95 $79.00 $99.85 $99.85 $83.50 $79.85 $87.90 $79.90 $191.90 $204.95 $79.85 $83.50 $81.90 $81.90 $79.50
254
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
All Cessnas using Cessna/McCauley Brakes B-30026 Skyhawk 172, Cardinal 177 All Skywagon 180 Skylane 182 H, J, K, L, M, N 185A, B 185C, D, E 185 with crosswind gear AGWagon Stationair-6 205, 205A Stationair-6 205, 205A (s/n 205-0481 & up) 206, U206A, D, E & Turbo models 207, T207 210C 210, P210, T210, 210N, P210N 303, T303 305A, B, C, D, E, F 310, 335 Skymaster 336 337, T337, 337B,C,D,E, T337B,C,D,E All Cessnas using Cessna/McCauley Brakes 66-55 66-55 66-55 66-2 66-55 66-2 66-55 66-2 66-55 66-55 66-55 66-4 66-55 66-44 66-55 66-33 66-2 66-55 B-30026
CIRRUS
SR-20 GRUMMAN AA-1,A,B,AA-5,AA-5A,AA-5B,Tiger,TR-2 AG-CAT G-154 Widgeon G44, G44A, Scan Type 30 MAULE - Jetasen/Rocket, Lunar/Rocket
Advise aircraft make, model and serial number to assure that correct brake lining part number is furnished Extra rivets, P/N 105-2, for all models listed in table .05 each
Pack of 4 linings 66-105 ...................... P/N 06-01309 ......$46.25 66-106 ...................... P/N 06-01310 ......$41.75 66-11 ........................ P/N 06-01564 ........$3.95
Designed especially to economically reline brakes, this riveting set is a handy tool for many other jobs where rivets are used to fasten leather, canvas, plastic and metal parts. Deluxe tool is screw-down type. Dlxe. Brake Lining Tool ................P/N 12-20810 ......................... $19.50 Brake Lining Tool .........................P/N 824 .................................. $14.50 Brake Lining Rivets 4-4 ................P/N 105-2 ................................. $0.03 Brake Lining Rivets 4-6 ................P/N 06-02300 ........................... $0.03
255
RAPCO P/N
Our Price Each $6.85 $6.85 $6.90 $19.90 $10.85 $10.50 $6.85 $10.50 $7.95 $11.85 $6.85 $6.85 $6.85 $6.90
Our P/N 0616959 16962 16965 16966 16968 16987 16987 01556 01557 01558 01559 01560 01561 01562 01563
Old Cleveland P/N 66-59 66-62 66-65 66-66 66-68 66-87 66-88 -----------------
New Cleveland P/N 66-108 66-62 66-65 66-66 66-68 66-109 66-109 066-09000 066-10000 066-07300 066-09100 066-09200 066-09700 066-06700 066-06400
RAPCO P/N RA66-108= RA66-62 RA66-65 RA66-66 RA66-68 RA66-109= RA66-109= RA066-09000 RA066-10000 RA066-07300 RA066-09100 RA066-09200 RA066-09700 RA066-06700 RA066-06400
Our Price Each $7.95 $10.85 $11.65 $10.55 $15.75 $8.35 $8.35 $24.00 $21.50 $26.75 $99.50 $179.00 $11.75 $15.75 $15.75
RA66-106 RA66-106* RA66-111 RA66-15 RA66-19 RA66-22 RA66-105 RA66-33 RA66-108 RA66-44 RA66-105 RA66-106 RA66-106* RA66-111
Kit P/N RA66-105-4K RA66-105-8K RA66-106-4K RA66-106-8K RA66-108-8K RA66-109-4K RA66-109-8K RA66-111-4K
No. of linings 4 8 4 8 8 4 8 4
Part No. 06-00643 06-00650 06-00651 06-00652 06-00681 06-00653 06-00682 06-00683
Kit Price $23.95 $49.85 $23.95 $49.85 $59.95 $29.95 $61.75 $24.85
RIVETS
* Use 2 each 66-106 linings to replace 1 each 66-3/66-57. ALL LININGS INCLUDE RIVETS Not for use on Stainless Steel Discs NOTE: Cessna Aircraft with Cessna / McCauley brakes use only RA66-109 linings. RAPCO P/N
RA105-00200-Cleveland RA105-00700-McCauley
Size
9/32 Long 1/4 Long
$/ea.
$0.14 $0.16
Complete with: Rivet Punch, Set and Anvil for setting rivets. More Convenient and easier to use than most punch style tools.Will not crack or distort brake linings. Can be used in vise or hand held. Brake Rivet tool RA825 ....................................P/N 10-02065 ......$26.50 Replacement Punch/Anvil RA825AP ...............P/N 10-02066 ........$5.75
This lining is a direct replacement for the 5009212 Rotor Brake Puck. This puck fi ts on Bell 206, Bell 206L1, 206L2, 206L3 Helicopters. It is the main rotor brake puck used to stop in emergancy conditions or heavy winds P/N 06-01306 ......................$157.95
All these brake pins are widely used in conjunction with the "Sintered" style brake linings. They are staked into place on the back plate and pressure plate assemblies in accordance with the brake maintenance manual. The RA177-00300 is a 5/16" pin designed for the back/pressure plates with 5/32" holes. The RA177-00400 is a 5/16 pin designed for the back/pressure plates with 3/16 holes. The RA177-01600 is a 3/8 pin designed for the back/pressure plates with 3/16 holes. RA177-00300 ..................................P/N 06-01215 .........................$2.20 RA177-00400 ..................................P/N 06-01499 .........................$1.89 RA177-01600 ..................................P/N 06-01501 .........................$1.90
256
CM WP
17
16
7 4 5 6 9 8 10
13 13
ME HA AP LG EP CS IN
Cleveland P/N 91-00702 91-04800 91-17401 61-00601 61-03901 92-00200 79-00300 101-02300 94-10300 95-10400 95-10200 079-00300 081-00100 183-00100 073-00300 063-00500 066-10600 15-00200 074-00200 064-00500 66-106 15-00200 68-00401 06-00011 075-00800 75-19300
Part No.
3 5
3 * * 8 * 19 20 18 10 12 11 23 17 21 22
161-5 161-00500 Inner Wheel Half Assy. 161-03100 161-03100 Inner Wheel Half Assy. 161-04100 161-04100 Inner Wheel Half Assy. 08231 214-00300 Cup-Bearing 162-00500 162-00500 Outer Wheel Half Assy. 162-01400 162-01400 Outer Wheel Half Assy. 162-02800 162-02800 Outer Wheel Half Assy. 162-03900 162-03900 Outer Wheel Half Assy. 08231 214-00300 Cup-Bearing 217-00100 217-00100 Grommet 101-07200 101-07200 O Ring 164-00400 164-00400 Brake Disc Assy. 164-17 164-01700 Brake Disc Assy. 08125 214-00400 Cone-Bearing AN4-31A 103-10800 Bolt AN4-22A 103-10500 Bolt AN960-416 095-10400 Washer AN365-428A 094-10300 Nut 153-00800 153-00800 Ring-Grease Seal 155-00200 155-00200 Ring-Snap 154-00600 154-00600 Felt-Grease Seal 158-00500 158-00500 Cap-Hub 102-25100 102-25100 Screw 095-15400 095-15400 Washer-Lock 157-00500 157-00500 Shield-Dust
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 6 6 6 6 3 3 3 3 3 3 3 3 4 2 2 4 4 4 2 2 2 2 2 2 2 1 1 2 2 2 1 1 1 1 1 1 1
1 1 1 1 1 1 2 2 3 3 6 3 2 2 1 1 1 1
2 3 4 5 6 7 8 9 10 11 12 13 14 12 13 15 16 17
3 2 2 1 1 1 1 1
06-01203 Cylinder Assy. 06-01204 Cylinder Assy. 06-01205 Cylinder Assy. 061-00601 Cylinder 061-03901 Cylinder 06-01206 Piston 062-00300 Piston AN6227B-23 O-ring (MS28775-218) 069-00400 Anchor bolt AN365-428A Nut (MS21044-N4) 095-10400 Washer (AN960-4-16) 095-10200 Washer (AN960-416L) 079-00300 Screw-Bleeder 081-00100 Seat-Bleeder 183-00100 Cap-Bleeder 073-00300 Pressure Plate Assy. 063-00500 Pressure Plate 066-10600 Lining 105-00200 Rivet 074-00200 Back Plate Assy. 064-00500 Back Plate 066-10600 Lining 105-00200 Rivet 06-01196 Shim 103-12100 Bolt 103-11500 Bolt 075-00800 Torque Plate Assy. 06-01201 Torque Plate Assy.
1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 3 1 1 1 3 2 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 3 1 1 1 3 2 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 3 1 1 1 3 2 1 1
1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 3 1 1 1 3 1 2 1 1
1 1 1 1 2 2 2 2 1 1 1 1 1 1 3 1 1 1 3 2
MODEL NO. 40-78 wheel with brake disc and 1-1/4 dia. bearings as
used on Cessna 150.
8
MODEL NO. 30-9 used with wheel 40-78........ P/N 30-9 ..........$419.00
5 5 2 4 17 16 3 6 6 7
EL
600 x 6 BRAKE ASSEMBLIES
AV TO PS BV
Qty. Per Assembly 30-56A 30-63A 30-63D 30-56 30-63 Price Ea.
FIG 2 3 5
Cleveland P/N 161-03000 161-02100 13836 162-02700 162-01900 13836 164-26A 164-02800 214-00200 AN5-35A AN4-37A AN960-516 AN960-416L AN365-524A AN365-428A 153-00400 153-00300 153-01500 158-00300 154-00300 154-01300 155-00100
Part Number 161-03000 161-02100 214-00100 162-02700 162-01900 214-00100 164-02601 164-02800 214-00200 103-20400 103-11200 095-10500 095-10200 094-10400 094-10300 153-00400 153-00300 153-01500 158-00300 154-00300 154-01300 155-00100
Description
Description
8 9 19 20 18 10
11 12
Inner Wheel Half Assy. Inner Wheel Half Assy. Cup-Bearing Outer Wheel Half Assy. Outer Wheel Half Assy. Cup-Bearing Brake Disc Assy. Brake Disc Assy. Cone-Bearing Bolt Bolt Washer Washer Nut Nut Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Cap-Hub Felt-Grease Seal Felt-Grease Seal Ring Snap
1 1 1 1 1 2 3 3 3 2 1 1 1 1 2
1 1 1 1 1 2 3 3 3 2 1 1 1 1 2
1 1 1 1 1 1 1 1 1 1 2 2 3 3 3 3 3 3 2 2 1 2 1 1 2 1 2 2
1 1 $288.95 1 $543.00 1 1 $27.25 1 $283.95 1 $635.00 1 1 $27.25 1 1 $127.95 1 $159.95 2 2 $42.75 3 $1.38 6 $1.16 3 $0.04 6 $0.02 3 $0.15 6 $0.10 2 2 $9.90 1 $9.90 1 $13.75 1 $42.75 1 1 $6.38 1 $6.90 2 2 $8.75
1 2 3 4 5 6 7 5 6 8 9 10 11 12 13 14 15 16 16 17
MODEL NO. 40-97A wheel with brake disc and 1.5 dia. bearings fits
Cessna 172, 182 P/N 40-97A .......................$699.00
091-02200 091-02200 061-01900 061-01900 062-01600 062-01600 101-05200 101-05200 073-01100 073-01100 063-01200 063-01200 66-105 66-155 RA105-00200 RA105-00200 074-01000 074-01000 064-01500 064-01500 66-105 66-105 RA105-00200 RA105-00200 069-00400 069-00400 AN365-428A 094-10300 AN960-416L 095-10200 081-00100 081-00100 079-00300 079-00300 183-00100 183-00100 AN823-4D 104-00500 AN4H-17A 103-11600 075-01600 075-01600 075-03700 075-03700 145-01000 145-01000
Cylinder Assy. Cylinder Piston O Ring Press. Plate Assy. Plate-Press. Lining RIVET Back Plate Assy. Plate-Back Lining Rivet Bolt-Anchor Nut Washer Seat-Bleeder Screw Bleeder Cap-Bleeder Fitting Tube Bolt-Lock Torque Plate Assy. Torque Plate Assy. Bushing
1 1 1 1 1 1 2 1 1 1 2 2 2 4 1 1 1 1
1 1 1 1 1 1 2 1 1 1 2 2 2 4 1 1 1 1 2 1
1 1 1 1 1 1 1 2 1 1 1 2 2 2 4 1 1 1
1 1 1 1 1 1 1 2 1 1 1 2 2 2 4 1 1 1
1 2
1 2
1 $464.95 1 $219.95 1 $59.75 1 $0.70 1 $79.80 1 $61.25 1 $13.50 2 $0.14 1 $139.95 1 $79.90 1 $13.50 2 $0.14 2 $23.90 2 $0.10 4 $0.02 1 $16.25 1 $10.65 1 $3.55 $6.50 $0.72 $235.95 1 $187.95 2 $18.00
257
This high performance shimmy damper is designed to last at least 10 yrs without maintenance and contains no hydraulic fluid, so it cannot leak. Priced at about half the cost of equivalent Cessna factory dampers. 5-yr warranty. All dampers are STCd and PMA approved. Features No Hydraulic Fluid: No periodic leaks or loss of damping. No servicing required. Reduced wear of nose gear linkages. Lower operating costs. Consistent damping from -30 to 150F: No loss of damping at temperature extremes. Reduced wear of nose gear linkages. Lower operating costs. No performance degradation over time and use: Reduced wear of nose gear linkages. Lower operating costs. Large diameter shaft: Increased durability. Lower operating costs. Simple Design:High reliability. Lower operating costs. Form, fit and function compatible: Simplicity of use (one-for-one replacement). Compatibility with existing installation. PN Lord # Installation Eligibility Price
Finally, a shimmy damper servicing kit. One of the most neglected components on Piper aircraft is the shimmy dampener. The shimmy damper aids nose wheel steering by reducing the shimmy of the nose wheel during takeoff and landing, and during high-speed taxiing. Even minor shimmying can lead to serious damage to the nose gear and engine mount and affect the airworthiness of the aircraft. The shimmy damper is a sealed unit that, until now, could not be serviced and required costly replacement. The STC and accompanying servicing kit allows the MAECO shimmy damper to be modified and serviced, restoring the shimmy damper to like-new condition and enabling it to perform as originally designed! The servicing kit installs in less than an hour by any A&P mechanic. Once modified, if the shimmy damper ever needs servicing again, the owner can service it with hydraulic fluid. Important: Enter Piper Aircraft Model, Serial number, and N number at time of order. P/N 06-00846 .......................... $162.95 FOR COMPLETE INSTALLATION ELIGIBILITY LIST SEE www.aircraftspruce.com
150G, H, J, K , L , M F150G, H, J, K, L, M, A150K, L, M FA150K, L FFRA150L, FRA150M 152 (ALL) 1978 thru 1985 (no letter designators) A152 (ALL) 1978 thru 1985 (no letter designators) FA152 (ALL) 1978 thru 1984 (no letter designators) 172, 172 A, B, C, D, E, F, G, H, I, $719.00 K, L, M, N, P, Q, R, S F172D, E, F, G, H, K, L, M, N, P, P172D, FR172E, F, G, H, J(REIMS ROCKET) R172K, FR172K 175, 175A, B, C 182B, C, D Note: The Lord Shimmy Damper PN 05-00443 will not work on Cessna 172 Years: 1956-1959
SE1051-3 Approved 150A - F 05-00444 Replacement $1,298.00 NOTE: Not for retractable gears. for Cessna # 0542119-2 SE-1068-5 Approved Cessna Replacement 182K-N 182P-T T282T
This nose gear shimmy damper from LORD Corporation is FAA approved for many models of Beech Aircraft. The patented technology provides consistent damping without maintenance. Instead of using fluids to resist motion, the shimmy damper features a unique rubber formulation with a high-tech lubricant to absorb nose wheel vibration. Length: 5-1/2. Long life - Demonstrated performance in excess of 5,000 ground-air-ground duty cycles, expecting a product life of more than 10 years of usage on typical, high-use, single-engine piston airplanes. Consistent damping From -30 degrees to +150 degrees F. FAA Approved. P/N 05-03421 .............. $648.00 A36TC G36 C35 G35 M35 V35 V35B E33C Barron 55 D55 58 Barron Beech Aircraft Eligibility List B36TC Bonanza 36 Bonanza 35 A35 D35 E35 H35 J35 N35 P35 V35-TC V35A V35B-TC E33 F33 F33A A55 B55 E55 56TC 58TC 58P A36 B35 F35 K35 S35 V35A-TC E33A G33A C55 A56TC
05-02610
$796.00
SE-1069-3 206H, P206B-E, T206H, Approved TU206B-G, U206B-G 05-00446 Replacement 207, 207A, T207, T207A, 210G- $760.00 for Cessna # H, 210J-N, 210R, P210N, P210R, 0743624-2 T210K-N SE-1070-7 Approved Replacement 05-03382 for Cessna # SE-1070-4 SE-2070-6
$2,238.00
05-04185
310, 310B, 310C, 310D, 310F, 310G, 310H, 3101, 310J, 310K, 310L, 310N, 310P, T310P, 3100, 13100, 310R, T310R,320, 320A, SE-1090-1 320B, 320C, 320D, 320E, 320F, $1,222.00 340, 340A, 401, 401A, 401B, 402, 402A, 402B, 402C, 411, 411A, 414, 414A, 421, 421A, 421B, 421C, 425, 404, 406, 441
258
CM WP ME
WHEEL COVERS
For 600-6 Cleveland wheels P/N 06-03710 .... $16.95 ea. For 500-5 Cleveland wheels P/N 06-00073 .... $19.95 ea. Furnished with screws for installation
HA AP LG EP CS
Part# BX44708 BX44708-4 BX44798 BX44799 BX44800 BX44785 BX44785-4 BX44863 BX44863-4
Model BX1000 BX1000 BX-AZUSA BX-AZUSA BX-AZUSA BX1320 BX1320 BX1500 BX1500
Rim Type WELDED WELDED Azusa Azusa Azusa SPLIT RIM SPLIT RIM SPLIT RIM SPLIT RIM
Axle Size 5/8 X 8 5/8 X 8 5/8 X 7.5 5/8 X 7.5 5/8 X 7.5 5/8 X 8 5/8 X 8 3/4 X 8 3/4 X 8
Price $436.95 $423.00 $439.95 $439.95 $439.95 $489.00 $521.00 $559.00 $575.00
IN EL AV TO
Band Brakes are simple, effective and economical for a variety of small, light-duty small vehicles, or as parking brakes. They were designed to work with either 4 or 4-1/2 diameter drums, but may work well with drums ranging in size from 3-7/8 through 4-5/8 O.D. 2 Piece Bonded Lining Comes with 1 band and 1 pin. Riveted End/Mounting Brackets Steel Brake Pin with Cable Hole Included Band Brake for 4.5 drum - Packaged PN 2555 P/N 06-00662 .......... $13.50
Figure No. 5 6 7 9 10 11
Description Felt, Grease Retaining Cone, Bearing Cup, Bearing Casting, Side Rivet, Brake Drum Drum, Brake (I.D. Must be turned after installation.)
PS BV
Brake Block (750-033) ......P/N 06-00013 ......$56.75 Spring (750-029) ...............P/N 06-00430 ........$7.60 Shield (750-093) ...............P/N 06-01042 ......$22.70
259
CESSNA
Main Tire Auxiliary Tire Model Name Tire Size Ply Tire Size Ply 120, 140 6.00-6 4 5.00-5 4 150, 152 Commuter,Aerobat 6.00-6 4 5.00-5 4 172 Skyhawk 6.00-6 4 5.00-5 4 R172 Hawk XP 6.00-6 4 5.00-5 4 172 Q Cutlass 6.00-6 6 5.00-5 4 172 RG Cutlass RG 15x6.00-6 6 5.00-5 4 175 Skylark 6.00-6 4 5.00-5 4 177 Cardinal 6.00-6 6 5.00-5 4 177 RG Cardinal RG 15x6.00-6 6 5.00-5 4 180 Skywagon 6.00-6 6 8.00SC 6 182, T182 Skylane 6.00-6 6 5.00-5 6 182RG,T182RG Skylane 15x6.00-6 5.00-5 4 185 Skywagon 6.00-6 6 8.00 SC 188 AG Wagon 22x8.00-8 10.00 SC 6 188 AG Wagon(optional) 8.50-10 6 10.00SC 205 6.00-6 6 5.00-5 6 206 Station Air 6.00-6 6 5.00-5 6 206, 207 Optional 8.00-6 6 6.00-6 4 207 Skywagon 6.00-6 8 6.00-6 8 208 (FLO) Caravan 8.50-10 8 22x8.00-8 208 (STA) Caravan 6.50-10 8 6.50-8 8 210 Centurion 6.00-6 8 5.00-5 6 T210, P210 Turbo, Centurion 6.00-6 8 5.00-5 10 T303 Crusader 6.00-6 8 6.00-6 6 T303 Optional 6.50-8 8 6.00-6 6 310, T310 6.50-10 6 6.00-6 4 320, 340 6.50-10 6 6.00-6 4 336 6.00-6 6 15x6.00-6 337 Super Skymaster 18x5.5 8 15x6.00-6 401, 402 6.50-10 8 6.00-6 6 404 Titan 22x7.75-10 10TL 6.00-6 6 411 6.50-10 8 6.00-6 6 414 Chancellor 6.50-10 8 6.00-6 6 421 Golden Eagle 6.50-10 8 6.00-6 6 425 Conquest I 6.50-10 10 6.00-6 6
Model C-17R BE 18 BE 18H BE 19 BE 23 BE23C,BE-A24 BE 24-R BE 33A BE 35 BE 36 BE 50 BE B55 BE C55 BE E55 BE 58 BE 60 BE 65 BE-80 BE-C90B BE-B200 BE-200T BE-99 BE-300/350 BE-2000 Model J3 PA18-135 PA18-150 PA22 PA23,160-235 PA23-250 PA24-180 PA24,250,260,400 PA25-150 PA25,236,260 PA28R-201 PA28-140 PA28-150 PA28-151,161 PA28-160 PA28-180 PA28-181 PA28-235 PA30 PA31 PA31 PA31T PA31P PA31T-500 PA32 PA32RT300 PA31P-350 PA34-220 PA36 PA38 PA42 PA44-180 600/601B (PA60) 601P(PA60-601P) 602P(PA60-602P) 700P(PA60-700P) PA46-350P PA34-270T PA44-180 PA32R-301 PA32R-301T PA28-181 PA28-161 Model MX-7-160 MXT-7-160 M-8-235 MX7-420 Name Staggerwing Twin Beech Twin Beech Musketeer Sport Musketeer Sundowner Super Sierra Bonanza Bonanza Bonanza Twin Bonanza Baron Baron Baron Baron Duke Queen Air Queen Air King Air Super King Air Super King Air Super King Air Starship 1 Name
BEECH
Main Tire Tire Size 7.50-10 11.00-12 8.50-10 6.00-6 6.00-6 6.00-6 6.00-6 7.00-6 7.00-6 7.00-6 8.50-10 6.50-8 6.50-8 6.50-8 6.50-8 19.5x6.75-8 8.50x10 8.50-10 8.50-10 18x5.5 22x6.75-10 18x5.5 22x6.75-10 H19.5x6.75-10
Auxiliary Tire Tire Size Ply 10.00SC 14.50SC 8TL 8.50-10 8TL 6.00-6 4 6.00-6 4 6.00-6 4 5.00-5 4 5.00-5 4 5.00-5 4 5.00-5 4 6.50-10 4 5.00-5 6 5.00-5 6 5.00-5 6 5.00-5 4 15x6.00-6 4 6.50-10 6TL 6.50-10 6TL 6.50-10 6TL 22x6.75-10 8TL 22x6.75-10 8TL 6.50-10 6TL 19.5x6.75-8 10TL 19x6.75-8 10TL
PIPER
Cub Super Cub Super Cub Tri Pacer Apache Aztec Commanche Commanche Pawnee Pawnee Arrow Cherokee Cherokee Warrior Cherokee Cherokee Archer Cherokee Twin Commanche Navajo Chieftain Navajo Pressurized Navajo Cheyenne 1A 6-300 Lance Mojave Seneca Brave Tomahawk Cheyenne IIIA Seminole Aerostar Aerostar Aerostar Aerostar Malibu Mirage Seneca V Seminole Saratoga II HP Saratoga II TC Archer III Warrior III Main Tire Auxiliary Tire Tire Size Ply Tire Size Ply 8.00-4 4 8.00SC Solid 6.00-6 4 8.00SC Solid 6.00-6 4 6x2.00 Solid 6.00-6 6 6.00-6 6 7.00-6 6 6.00-6 4 7.00-6 8 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 6 6.00-6 4/6 7.00-6 4 8x3.00-4 4 8.00-6 4 8x3.00-4 4 6.00-6 6 5.00-5 4 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 4 5.00-5 4 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 4 5.00-5 4 6.00-6 4 6.00-6 4 6.00-6 4 6.00-6 6 6.50-10 8 6.006 6.50-10 8 6.00-6 6 6.50-10 10 6.00-6 6 6.50-10 8 6.00-6 8 6.50-10 10 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 8 6.00-6 4 6.50-10 8 17.5x6.25-6 10 6.00-6 8 6.00-6 6 8.50-10 6 10x3.5-4 6 6.00-6 6 5.00-5 6 6.50-10 12 TL 17.5x6.25-6 10 6.00-6 6 6.00-6 6 6.50-8 8TL 6.00-6 6 6.50-8 8 TL 6.00-6 6 6.50-8 8 TL 6.00-6 6 6.50-8 8 TL 6.00-6 6 6.00-6 8 5.00-5 6 6.00-6 8 6.00-6 8 6.00-6 8 5.00-5 6 6.00-6 8 5.00-5 6 6.00-6 8 5.00-5 6 6.00-6 4/6 6.00-6 4 6.00-6 4 5.00-5 4 Auxiliary Tire Tire Size Ply 280/250-4 4 280/250-4 4 280/250-4 4 280/250-4 4
BELLANCA
Model 260A 17-30A 17-31A 17-31ATC 7GCAA 7KCAB 8KCAB 8GCBC Model MO-20 MO-21C MO-22 MO-20E MO-20F MO-20J MO-20K M-20K M-20M M-20S M-20R Model 112 112B 112TC, TCA 114 114A, B Name Bellanca Viking Super Viking Turbo Viking Citabria Citabria Decathlon Scout Name Ranger Super Mustang Chapparal Executive 201 Turbo 231 TSE Bravo Eagle Ovation Name Commander Main Tire Tire Size Ply 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 4 7.00-6 4 8.00-6 4 8.50-6 4/6 Auxiliary Tire Tire Size Ply 6.00-6 4 15x6.00-6 6/8 15x6.00-6 6/8 15x6.00-6 6/8 5.00-5 4 5.00-5 4 5.00-5 4 5.00-5 4 Auxiliary Tire Tire Size Ply 5.00-5 4/6 5.00-5 4/6 15x6.00-6 6 5.00-5 4 5.00-5 6 5.00-5 6 5.00-5 6 5.00-5 4 5.00-5 6 5.00-5 6 5.00-5 6 Auxiliary Tire Tire Size Ply 5.00-5 4 5.00-5 4 5.00-5 6 5.00-5 6 5.00-5 6
MOONEY
Main Tire Tire Size Ply 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 6.00-6 6 Main Tire Tire Size Ply 6.00-6 6 7.00-6 6 7.00-6 6 7.00-6 6 6.00-6 6
COMMANDER AIRCRAFT
MAULE
Name Main Tire Tire Size Ply 7.00-6 4/6 7.00-6 4/6 7.00-6 4/6 7.00-6 4/6
260
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Flight Custom III Goodyear Flight Custom III Tires are the ONLY General Aviation tires with Kevlar: Antioxidant formulation to help reduce cracking. Deeper Tread Depth. Wide Aquachannels. Kevlar belt package. Premium Wingstay formulation. Dual polymer tread compound. Get up to 20% more landings. Superior wet traction, enhanced treadwear. The Goodyear Flight Custom III offers up to 20% more landings to removal than its predecessor. Dupont tm and Kevlar (circleR) are trademarks or registered trademarks or E.I. du Pont de Nemours and Company. Results may vary based on proper maintenance, runway and operating conditions.
Flight Special II A popular replacement tire for light aircraft, the Flight Special is an unsurpassed combination of value and performance. Designed for long treadlife, this tire is built to last. Every strand of nylon cord in the casing has been triple tempered with time, tension and temperature to provide the ultimate in tire construction, uniformity and strength. FEATURES: Wide rib tread design and large footprint Enhanced tread compound for uniform wear and extended service life Triple-tempered nylon casing cord. BENEFITS: Enhanced traction Uniform wear and extended SERVICE LIFE: Excellent Treadwear. Eases installation of tubes in tires. Size: 13oz. DISCOUNT: LESS 15% ON 12 P/N 17-250................ $8.50 A B at the end of a description means BENT valve stem. An S at the end of a description means STRAIGHT valve stem. (1) For use in both 5.00-5 and G380x150-5 (15x6.00-5). (2) For use in both 6.00-6 and 15x6.00-6 tires. (3) For use in both 7.00-6 and 8.00-6 tires. (4) For use in 6.50-8, 19.5x6.75-8 & 22x8.00-8 tires. (5) Discontinued, call for Special Pricing. -Natural rubber aircraft tubes comply with the requirements of Goodyear QAI 2525, which the U.S. Military has accepted in lieu of MIL-I-5014. -Flight Mate (Butyl) tubes comply with the requirements of SAE document AS 50141.
TIRE TALC
GOODYEAR TUBES
Tube Size 5.00-4 Flight Mate 5.00-5 Flight Mate 6.50-10 Flight Mate 7.00/8.00-6 Flight Mate 7.50/8.50-10 Flight Mate 8.50-6 Flight Mate 8.90-12.50 Flight Mate 11.00-12 G15/6.00-6 Flight Mate* G15/6.00-6 Flight Mate* 17.00-16 18X5.5 G19.5X6.75-8 Flight Mate Description Avg. Weight (lbs.) Part No. Price Each Butyl Tube TR 67, B 1 06-04800 $87.95 Butyl Tube TR 67A (1), B 1 06-05000 $64.50 Butyl Tube TR 25, S 2 06-06000 $54.75 Butyl Tube TR 20, (3), S 2 06-06300 $54.25 Butyl Tube TR 25, S 3 06-07000 $76.85 Butyl Tube TR 20, S 3 06-01050 $122.95 Butyl Tube TR 15, S 6 06-01051 $93.75 Reg. Tube TR 13, S 7 06-01052 $92.50 Butyl Tube TR 67A, B 1 06-05305 $96.50 Butyl Tube TR 20, (2), S 1 06-05300-1 $49.75 Reg. Tube TR 91G, B (5) 14 06-01054 $352.95 Reg. Tube TR 67A, B (5) 2 06-01055 $143.95 Butyl Tube TR 15, (4), S 2 06-05700 $55.85
261
AP LG EP CS IN EL AV TO PS BV
18X4.25-10 6 16X4.4 4 16X4.4 6 16X4.4 6 16X4.4 10 16X4.4 12 18X4.4 6 18X4.4 10 18X4.4 10 18X4.4 10 18X4.4 10 18X4.4 12 14.5X5.5-6 LR2800 18X5.5 8 18X5.5 10 18X5.5 10 17.5X5.75-8 12 17.5X5.75-8 17 18X5.75-8 8 22X5.75-12 10 22X5.75 12 15X6.00-6 10 17.5X6.25-6 8 21X6.50-10 12 26X6.6 14 26X6.6 14 25.75X6.75-14 14 26.6.75-14 16 23X7.00-12 12 21X7.25-10 12 24X7.7 16 22X7.75-10 10 22X7.75-10 12 22X8.00-10 10 22X8.00-10 12 H26.5X8.0-14 14 H22X8.25-10 12 H22X8.25-10 14 34X9.25-16 18 H34X9.25-18 18 B24X9.5-10.5 18 H35X11.0-18 20 H38X12.0-19 20 26X6.6R14 14
262
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These fine nylon cord tires with rib tread design are rigidly tested to meet FAA Standard TSO-C62. Air Trac tires are original equipment on many of todays aircraft and offer great performance in an economical tire. Air Hawk are premium grade tires, cost more but provide longer service life. Performance, construction, and safety you can count on from Specialty Tires tires and tubes. Compare prices and get the best savings and faster service from Aircraft Spruce.
600 X 6, 4 PLY KIT - Consists of three 600 x 6 4 ply tires and tubes. Fits
PA-24-180 Comanche, PA-28 Cherokee, Beech Musketeer, Musketeer Sport, and Sundowner. W/Air Trac tires ................. P/N 06-21200 .... $374.95 W/Air Hawk tires ............... P/N 06-21205 .... $372.95 600 X 6, 6 PLY KIT - Consists of three Specialty Tires 600 x 6 6 ply Air Trac tires and tubes. Fits Piper PA-44 Seminole, PA-30 Twin Comanche, and Cessna 337. W/Air Trac tires ................. P/N 06-21300 .... $386.95 W/Air Hawk tires ............... P/N 06-21305 .... $398.95 6.00 X 6, 6 PLY / 5.00 X 5, 6 PLY KIT - Two Specialty Tires 6.00 x 6, 6 ply tires and tubes and one 5.00 x 5, 6 ply tire and tube. Fits Cessna 182, 182N; all 206 Skylane, Skywagon, and Station Air 207; Mooney 201, 220; Waco 250 260, PA-32 6-300 Lance. W/Air Trac tires ................. P/N 06-21100 .... $387.95 W/Air Hawk tires ............... P/N 06-21105 .... $404.95 6.00 X 6, 4 PLY KIT - Two Specialty Tires 6.00 x 6, 4 ply tires and tubes. Fits Bellanca Citabria 7ECA, 7GCA-A, 7GCBC and 7KCA-B. W/Air Trac tires ................. P/N 06-21110 .... $249.95 W/Air Hawk tires ............... P/N 06-21115 .... $248.95 6.00 X 6, 4 PLY / 5.00 X 5, 4 PLY KIT - Two Specialty Tires 6.00 x 6, 4 ply tires and tubes and one 5.00 x 5, 4 ply tire and tube. Fits Beech Super/Musketeer Sierra; Cessna 150, 172, 175, 177; Grumman AA1B, AA5; PA-28, 151, 180R, 200R. W/Air Trac tires ................. P/N 06-21120 .... $376.95 W/Air Hawk tires ............... P/N 06-21125 .... $386.95 6.00 X 6, 6 PLY / 5.00 X 5, 4 PLY KIT - Two Specialty Tires 6.00 x 6, 6 ply tires and tubes and one 5.00 x 5, 4 ply tire and tube. Fits Beech Debonair 33, 33A; Bonanza 33; Mooney 200, Mark 21C; Rockwell Commander. W/Air Trac tires ................. P/N 06-21130 .... $384.95 W/Air Hawk tires ............... P/N 06-21135 .... $391.95 6.00 X 6, 6 PLY / 6.00 X 6, 4 PLY KIT - Two Specialty Tires 6.00 x 6, 6 ply tires and tubes and one 6.00 x 6, 4 ply tire and tube. Fits Bellanca 206, Viking; PA-24-250, 260, PA-32-260, 300. W/Air Trac tires ................. P/N 06-21140 .... $382.95 W/Air Hawk tires ............... P/N 06-21145 .... $393.95 6.50 X 10, 8 PLY / 6.00 X 6, 6 PLY KIT - Two Specialty Tires 6.50 x 10, 8 ply tires & tubes & one 6.00 x 6, 6 ply tire and tube. Fits Cessna 340, 401, 402, 411, 414, 421; PA-31-300, 310, 350, PA-31P-425. W/Air Trac tires ................. P/N 06-21155 .... $603.00 W/Air Hawk tires ............... P/N 06-21160 .... $625.00 7.00 X 6, 6 PLY / 6.00 X 6, 4 PLY KIT - Two Specialty Tires 7.00 x 6, 6 ply tires and tubes and one 6.00 x 6, 4 ply tire and tube. Fits PA-23, 160, 235, 250. W/Air Trac tires ................. P/N 06-21165 .... $515.00 W/Air Hawk tires ............... P/N 06-21170 .... $526.00 8.50 X 6, 6 PLY KIT - Two Air Trac 8.50 x 6, 6 ply tires and tubes. Fits Bellanca Decathlon 8KCA-B and Scout 8GCBC. W/Air Trac tires ................. P/N 06-21175 .... $674.00
263
MICHELIN TIRES
CM WP
Size 11.00-12 Ply 10 6 6 8 8 12 10 8 10 6 6 10 8 Michelin AIR: The tire for demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelins toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the Posi-Fit bead construction reduces movement between the tire and the wheel for improved lateral stability. Michelin Aviator: A Michelin quality tire at a great price. Like the Michelin AIR, the Aviator offers exceptional balance, a new sidewall confi guration and an extra strong nylon casing. It also features the tough MX1000 tread compound for long life, and a specialized sidewall compound to protect against ultraviolet light. Speed (MPH) 160 160 160 160 160 210 120 160 210 190 160 210 190 160 190 160 190 160 190 190 120 160 120 120 160 120 120 120 160 120 120 120 120 120 120 160 120 160 190 120 120 120 120 160 120 120 160 160 160 160 120 120 120 120 120 160 160 160 160 120 190 190 Avg W Applications (lbs) Michelin Aviator 46 IAI 201, Bombardier DHC6, Casa 212, 235 (MLG) Beech 17, 24, Baron 58, 60, 77 - Bellanca 1730, 1731 - Cessna 172, 177, Michelin Aviator 7 182RG (MLG) - Cessna 336, 337 - Rockwell Intl 695, 700, 840 (NLG) Cessna 172, 177, 182 - Cirrus SR20, SR22 (MLG) - Cessna 336, 337 Michelin Air 7 (NLG) Michelin Aviator 9 Raytheon T6A Texan - Pilatus PC9 - Embraer Xingu - Fairchild SA226 (NLG) Michelin Air 9 Cessna Mustang (NLG) Michelin Aviator 14 Learjet 20, 31, 35, 36 (MLG) Michelin Air 11 Piper PA31, 42 (NLG) Michelin Air 11 Pilatus PC-12 (NLG) Michelin Air 12 Learjet 31, 35, 36, 55, (NLG) Michelin Air 13 Cessna CJ, CJ1, CJ1+, CJ2 (NLG) Michelin Aviator 8 Fairchild SA226, 227, Piper PA31 (NLG) Michelin Air 14 Beech King Air 200, 55 (MLG) - Socata TBM 700, 850 (MLG) Beech King Air 200, 99, 100 - Cessna 337 -Socata TBM700 (MLG) - BomMichelin Aviator 12 bardier DHC8 - Embraer EMB120, Fairchild SA226 (NLG) Michelin Aviator 14 Beech King Air 300, Baron 58, 60 - Fairchild SA226, 227 (MLG) Michelin Air 18 Beech King Air 200 (NLG), Beech 1900D (MLG), IJT36 (MLG) Beech 1900C (MLG), King Air 300 & 200 (NLG) - Tucano S312 (MLG) Michelin Aviator 16 Cessna Mustang (MLG) Michelin Air 20 Cessna CJ, CJ1, CJ1+, CJ2, CJ2+ (MLG) Michelin Air 19 Cessna 404 Titan, 441 Conquest II (MLG) Michelin Aviator 27 Cessna Citation SII, V, Ultra (MLG) Michelin Aviator 24 Cessna Citation I (MLG) Michelin Air 14 Cessna 208 (NLG) Michelin Air 35 Cessna 208 (MLG) Michelin Air 7 Robin Michelin Air 7 Robin Michelin Air 6 Eclipse 500 (NLG) Michelin Aviator 6 Michelin Air 6 Cirrus SR20, SR22 (NLG) Michelin Aviator 6 Michelin Aviator 7 Eurocopter Tigre (TLG) Michelin Air 6 Michelin Air 9 Michelin Aviator 9 Michelin Air 9 Michelin Aviator 9 Michelin Air 9 Michelin Aviator 9 Michelin Aviator 9 Michelin Air 9 Michelin Aviator 18 Piaggio P180, Piper PA-31 (MLG) Michelin Air 16 Cessna 208, 310, 335, 401, 402, 414, 421, 425, Piper PA-30, 31 (MLG) Michelin Aviator 16 Cessna 208, 310, 335, 401, 402, 414, 421, 425, Piper PA-30, 31 (MLG) Michelin Aviator 16 Cessna 425 Conquest I (MLG) Michelin Air 16 Beech King Air 90 (NLG) Michelin Aviator 17 Piper PA-42 (MLG) Michelin Aviator 16 Beech King Air C90 (NLG) Michelin Air 16 Cessna 425 Conquest I (MLG) Michelin Aviator 16 Bombardier CL215, 415 (NLG), Cessna 208 (MLG) Michelin Air 16 Michelin Air 13 Beech Baron 55,56 (MLG) Michelin Aviator 13 Pilatus PC7 (MLG) Michelin Air 11 Beech 33, 35, 36 (MLG) Michelin Aviator 11 Piper PA23 (MLG) Michelin Aviator 11 Beech 33, 35, 36 (MLG) Michelin Air 11 Piper PA23 (MLG) Michelin Aviator 13 Cessna 140, 185, 206, 207, 305, 01E, Socata Rallye Gulfstream 690, 680T - Rockwell Intl 685, 690, 695, 700, 840 (MLG) -PilaMichelin Aviator 25 tus PC12 (MLG) Beech 18, 50, 65, 70, 80, 88, King Air 90 - Cessna 188, 208, 308, 406 Michelin Air 25 - Gulfstream 500, 560, 680, 681, 685, 720 - Mitsubishi MU2 - Piaggio 149, 166, 136 - Rockwell Intl 500, 560, 680, 520 (MLG) Michelin Air 25 Gulfstream 690, 680T - Rockwell Intl 685, 690, 695, 700, 840 (MLG) Beech 18, 50, 65, 70, 80, 88, King Air 90 - Cessna 188, 208, 308, 406 Michelin Aviator 25 Gulfstream 500, 560, 680, 681, 685, 720 - MItsubishi MU2 - Piaggio 149, 166, 136 - Rockwell Intl 500, 560, 680, 520 (MLG) Michelin Air 14 High flotation, fixed gear Michelin Air 20 Cessna CJ3 (MLG) - Hawker Premier 1 (MLG) Michelin Air 22 Cessna Citation Encore, Encore+, 560 (MLG) Brand Part No. Price
06-01397 $682.00 06-00308 $126.95 06-01398 $164.95 06-01399 06-01401 06-01402 06-01403 06-01404 06-01410 06-01411 06-01414 06-01415 $225.95 $287.95 $449.95 $247.95 $247.95 $410.95 $426.95 $370.95 $378.95
ME HA AP LG EP CS IN EL AV TO PS BV
15x6.0-6 15x6.0-6 16x4.4 16x4.4 17.5x5.75-8 17.5x6.25-6 17.5x6.25-6 18x4.4 18x4.4 18x4.4 18x5.5 18x5.5
06-01416 $363.95 06-01417 $255.95 06-01422 $343.95 06-01423 $327.95 06-01424 06-01425 06-01426 06-01427 06-01428 06-01432 06-01434 06-01435 06-01436 06-00016 06-08052 06-01437 06-01438 06-01439 08-08080 06-00018 06-08058 06-00314 06-01441 06-01442 06-00017 06-01443 06-01444 06-08065 06-01445 06-01446 06-01447 06-01448 06-01449 06-01450 06-01451 06-01452 06-08070 06-00315 06-08059 06-01453 06-00316 08-08075 06-01456 $455.95 $423.95 $565.00 $515.00 $195.95 $623.00 $164.95 $152.95 $212.95 $105.95 $162.95 $139.95 $157.95 $153.95 $197.95 $133.95 $188.25 $153.95 $178.95 $142.95 $129.00 $209.95 $302.95 $265.95 $258.95 $277.95 $301.95 $313.95 $241.95 $359.00 $311.95 $296.95 $263.95 $193.95 $229.00 $201.95 $173.95 $229.95 $189.00
19.5x6.75-8 10 22x6.75-10 10 22x6.75-10 22x7.75-10 22x7.75-10 22x8.0-10 22x8.0-10 22x8.0-8 29x11.0-10 380x150-5 15x6.00-5 5.00-5 5.00-5 5.00-5 5.00-5 5.00-5 5.00-5 6.00-6 6.00-6 6.00-6 6.00-6 6.00-6 6.00-6 6.00-6 6.00-6 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-10 6.50-8 6.50-8 7.00-6 7.00-6 7.00-6 7.00-6 8.00-6 8.50-10 8.50-10 8.50-10 8.50-10 8 12 10 12 10 8 10 6 6 8 6 6 10 8 4 6 6 8 8 4 6 4 8 12 8 8 10 6 12 6 10 10 10 8 8 6 8 6 8 6 10 8 10 8
06-01457 $483.95 06-01458 $369.95 06-01459 $507.00 06-01460 $379.95 06-01461 $264.00 06-01463 $683.00 06-01464 $742.00
264
CM WP ME HA AP LG
EP CS IN
EL AV TO PS BV
265
500-5 10 ply high performance retreaded tires *Subject To Limted Core Availability* Their premium retreads are produced by: Aero Wheel & Brake Service Corp. Aero WBS holds FAA certification to retread high speed aircraft tires up to 225 MPH. Their sizes range from small piston engine aircraft through Regional Jet aircraft. 95% of the worlds airlines depend on retreads not only for cost control, but for the extended life they provide over most new tires.
Size 500-5 Standard 500-5 Monster retread 9/32nds tread depth 500-5 Elite - 2 wide hydro-grooves. With 9/32nds tread depth. 600-6 Standard 600-6 - Monster retread. Almost 12/32nds tread Depth 600-6 - Elite Premium 2 Groove Top of the line. 2 Wide Hydro-Grooves 15/600-6 Standard 700-6 Standard Ply 6 6 6 6 6 6 6 6 Part No. 06-01468 06-01469 06-01470 06-01472 06-01473 06-01474 06-01471 06-01475 Price $48.75 $69.95 $68.90 $59.95 $69.95 $79.95 $69.00 $97.65
RETREAD TIRES
266
Size 10/350-4 10/350-4 11/400-5 11/12TL 12.5-4.5 15/600-5 200-50 280/250-4 280/250-4 380/150-5 400-6 400-4 420-150 500-5 500-5 500-5 6x2 600-6 600-6 600-6 600-6.5 700-7.5 700-8 700-8 8.9 x 12.5 Size 11/400-5 11/400-5 300-4 13/500-6 400-6 410/350-5 800-6 Size 10/350-4 11/400-5 1100-12 12.5-4.5 15/600-6 15/600-6 18-5.5 19.5/675-8 22/800-8 280/250-4 29/1100-10 420-150 500-4 500-5 600-6 600-6.5 600-6.5 650/700-8 650-10 700/800-6 750-10 800-4 850-10 890-12.50
Ply 4 6 8 8 10 6 6 4 6 6 6 8 4 4 6 10 4 6 8 4 6 6 6 6
Description Aero Classic Premium Aero Classic Premium - HD Aero Classic Wide Channel Aero Classic Tubless Aero Classic Channel Aero Classic Rib Aero Classic Rib Aero Classic Premium Aero Classic Premium - HD Aero Classic Rib Aero Classic Rib Aero Classic Rib Aero Classic Rib Aero Classic All Weather Aero Classic All Weather Aero Classic All Weather Aero Classic Solid Tailwheel Aero Classic All Weather Aero Classic All Weather Aero Classic All Weather Aero Classic Rib Aero Classic All Weather Aero Classic All Weather Aero Classic Vintage Aero Classic Diamond (Stearman) Ply 2 8 4 2 2 2 4 Description Rib Tire Rib Tire Rib Tire Rib Tire Rib Tire Sawtooth Tire Sawtooth Tire Model Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Low Temp. Natural Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Low Temp. Natural Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Low Temp. Natural Tube, Low Temp. Natural Tube, Leakguard Butyl Tube, Leakguard Butyl Tube, Low Temp Natural Tube, Low Temp Natural Tube, Leakguard Butyl Tube, Leakguard Butyl Tube,Leakguard Butyl Tube, Leakguard Butyl Tube, Low Temp. Natural Tube, Leakguard Butyl Tube, Low Temp. Natural
Part No. 06-01238 06-01239 06-01240 06-01467 06-01241 06-01242 06-01243 06-01244 06-01245 06-01249 06-00944 06-00844 06-01250 06-01251 06-01252 06-01253 06-01044 06-01254 06-01255 06-01256 06-01257 06-01258 06-01259 06-01126 06-01518
Price $39.25 $52.75 $52.50 $582.00 $236.95 $140.95 $32.75 $39.50 $52.75 $117.95 $55.50 $54.00 $188.50 $89.85 $102.95 $148.95 $59.85 $124.95 $132.95 $148.95 $197.95 $379.00 $314.95 $267.95 $597.00 Price $14.85 $34.50 $31.50 $33.25 $15.85 $21.75 $77.65 Price $11.95 $12.65 $137.95 $63.95 $47.95 $115.95 $139.95 $59.95 $77.75 $12.25 $149.95 $102.95 $86.75 $56.00 $47.25 $102.95 $104.95 $52.50 $93.50 $51.50 $71.95 $159.50 $64.50 $138.75
Dimensions 4.10 x 3.50 x 4 3.40 x 3.00 x 5 4.10 x 3.50 x 5 11 x 4.00 x 5 13.5 x 6.00 x 6 4.80 x 4.00 x 8 3.40 x 3.00 x 5* 400x6 4.10 x 3.50 x 5 4.10 x 3.50 x 5 11 x 4.00 x 5 11 x 4.50 x 6 4.80 x 4.00 x 8 20 x 7.00 x 8
Ply 4 PLY 4 PLY 2 PLY 2 PLY 2 PLY 4 PLY 4 PLY -2 PLY -2 PLY --2 PLY
Part No. Price 06-10830 $25.50 06-10840 $37.50 06-10850 $29.75 06-10860 $27.90 06-10870 $37.00 06-10880 $24.00 06-00711 $29.90 06-01503 $7.85 06-00713 $21.75 06-00714 $8.25 06-00715 $14.85 06-00716 $12.50 06-00720 $8.95 06-01596 $119.85
CM WP ME HA AP LG
*2008 Shin tire superceded by Carlisle. This tire fills the size gap between the 5.00-5 aircraft tire and the 3.40-5 industrial tire. Looks like a scaleddown 5.00-5. Fits VariEze, KRs and most experimentals using 5 wheels. These tires require tubes. (tube-type). Formerly known as Lamb tires, these are superceded by Cheng-Shin. 11.400-5 (6 Ply) Tire ............ P/N 06-07400 ......$34.65 11.400-5 (8 Ply) Tire ............ P/N 06-07500 ......$34.50 11.400-5 Tube ................................................ P/N 06-07600 ........$9.75
TIRES
Part No. 06-00361 06-00362 06-00363 06-00364 06-00366 Part No. 06-00354 06-00355 06-00356 06-00357 06-00358 Nom. Size 300 x 4 400 x 5 400 x 6 500 x 6 800 x 6 W 3.2 3.9 4.1 4.8 6.0 Dia. 10.0 10.5 13.0 12.6 16.3 Price $31.50 $13.50 $15.85 $33.25 $77.65 Price $10.95 $8.85 $11.95 $12.65 $24.00
EP CS IN EL AV TO PS BV
TUBES
Size 300x4 3.50x5 600x6 400x5 800x6
LEAKGUARD TUBES
Valve TR-87 TR-87 TR-13 TR-67 TR-20 TR-67 TR-15 TR-15 TR-15 TR-87 TR-150 TR-67 TR-67 TR-67 TR-20 TR-20 TR-67 TR-15 TR-25 TR-20 TR-25 TR-12 TR-25 TR-15
Azusa Ribbed/Flat Profile Tires. Price per tire. Note: These are not automotive tires, extra inflation precautions are required. Size / Tire 11-400 X 5 / 7164 11-400 X 5 / 7046 11-400 X 5 / 7046-8 13-500 X 6 / 7168 410/350 x 6 13-500 X 6 / 7018 13-500 X 6C / 7087 13-650 X 6 / 7031 15-600 X 6 / 7169 15-600 X 6C / 7088 800 X 6 / 7007 16-650 x 8 /7024-2 16-650 X 8 / 7024-2 18-850 X 8 / 7002 18-950 X 8 / 7027 13-500 x 6 / 7018 15-600 x 6 / 7050-2 Ply / OD* / Innertube Width 2 / 3.2" 10.5" / 7131 4 / 3.9" 10.5" / 7131 8 / 3.2" 10.8" / 7131 2 / 4.8" 12.6" / 7133 4 / 4.0 12.5 / 7039 4 / 4.8" 12.6" / 7133 4 / 4.8" 12.6" / 7133 4 / 6.0" 12.5" / 7141 2 / 5.9" 14.8" / 7125 4 / 6.0" 15.0" / 7125 4 / 8.0" 16.0" / 7138 2 / 6.4" 16.4" / 7118 2 / 6.4" 16.4" / 7118 4 / 8.0" 16.5" / 7120 4 / 8.0" 17.4" / 7120 2 / 4.8" 12.6" / 7133 2 / 5.9" 14.8" / 7125 Part No. 06-01571 06-00362 06-01573 06-01568 06-00074 06-01572 06-01574 06-01575 06-01576 06-01577 06-01578 06-01609 06-01579 06-01580 06-01581 15-04692 15-06910 Part No. 06-00075 06-00822 15-04731 15-06300 06-01590 15-04869 06-01592 06-01593 Price $20.75 $13.50 $29.95 $28.75 $17.50 $22.75 $32.50 $38.75 $31.75 $54.85 $92.50 $43.75 $43.75 $58.50 $65.50 $24.75 $31.75 Price $7.95 $7.90 $27.50 $12.50 $11.75 $11.95 $20.50 $15.50
Valve TR-13 TR-87 TR-87 TR-87 TR-87 TR-87 TR-87 TR-87 TR-12
TR-20 TR-20
Part No. 06-00357 06-00716 06-00354 06-00945 06-01368 06-00714 06-00720 06-00358 06-00821 06-00765 06-01236
Price $12.65 $12.50 $10.95 $14.95 $18.75 $8.25 $8.95 $24.00 $159.50 $86.50 $130.95
Tubes AZUSA TUBE #7133 410/350X6 AZUSA TUBE #7131 340/300 X 5 AZUSA TUBE#7120 18-950 X 8 AZUSA TUBE #7116 11-600 X 5 AZUSA TUBE #7141 410/350X6 AZUSA TUBE #7125 15-600 X 6 AZUSA TUBE #7138 800 X 6 AZUSA TUBE #7118 16-650/750 X8
267
NOSE WHEELS
MATCO NOSE WHEELS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Our Part No. 06-00537 06-00539 06-00538 06-00540 06-00541 06-00542 06-00543 06-00544 06-00545 06-00546 06-00547 06-00548 06-00549 06-00550 06-00551 06-00552 06-00553 06-00554 06-00555 06-00556 06-00557 06-00558 06-00559 06-00560 06-00561 06-00562 06-00563
Dia. (in.) 6 6 6 6 4 4 4 5 5 5 5 6 6 4 5 5 5 5 5 5 6 6 6 6 6 6 8
Bearing Axle dia. 0.625 0.625 0.75 0.75 6.25 0.75 0.75 0.75 0.75 1.25 1.25 1.25 1.25 0.625 0.625 0.75 0.625 0.75 0.75 0.75 0.625 0.75 0.75 0.625 0.75 0.75 0.625
Bearing Type Sealed Ball Ball Ball Ball Ball Ball Taper/Roll Taper/Roll Taper/Roll Taper/Roll Taper/Roll Taper/Roll Taper/Roll Ball Ball Ball Ball Ball Taper/Roll Taper/Roll Ball Ball Taper/Roll Ball Ball Taper/Roll Ball
Width 5.325 5.325 5.325 5.325 3 3 3 3.88 3.88 3.88 3.88 3.5 4.5 3.25 4.38 4.38 4.38 4.38 4.38 4.38 4.38 4.38 4.38 5.38 5.38 5.38 3
Static Capacity (lbs.) 660 660 660 60 660 660 1185 1185 1185 1420 1420 1420 1420 660 660 660 660 660 1185 1185 660 660 1185 660 660 1185 660
Load Limit (lbs.) 2000 2000 2000 2000 2000 2000 3560 3560 3560 4260 4260 4260 4260 2000 2000 2000 2000 2000 3560 3560 2000 2000 3560 2000 2000 3560 2000
Weight (lbs.) 2.6 2.6 2.6 2.6 2.25 2.25 2.25 3.24 3.24 3.24 3.6 3.24 3.24 1.8 2.7 2.7 2.7 2.7 2.8 2.8 3.22 3.22 3.52 3.47 3.47 3.52 5.02
Price $78.50 $78.00 $78.65 $79.00 $82.25 $82.25 $117.95 $134.95 $134.95 $134.95 $134.95 $137.95 $129.85 $45.30 $78.85 $77.95 $77.50 $74.00 $124.95 $124.95 $78.65 $80.00 $124.00 $80.00 $80.00 $135.95 $93.75
MATERIAL: SPUN ALUMINUM MH6N MH6N-S MH6N.75 MH6N-S.75 MATERIAL: CNC CAST ALUMINUM NW40B NW40B.75 NW40R NW50 NW51 NW501.25 NW511.25 NW60 NW600 MATERIAL: DIE CAST ALUMINUM NW40EE NW50CC NW50CC.75 NW51CC NW51CC.75 NW50CC.75R NW51CC75R NW60CC NW60CC.75 NW60CC.75R NW600CC NW600CC.75 NW600CC.75R NW80CC-Z
Lightweight Nose Wheels are aluminum red anodized, machined from billet on CNC, with O-rings for Tubeless mounting. Static capacity: 1440 Lbs (with appropriate tire). Aluminum axle for 5/16 bolt diameter. Kit includes: 1 nose wheel with tire (mounted on rim, pressure tested) and 1 aluminum axle
A/C Model -
Description
PN
Price
PART NUMBER
Nose wheel kit as described above, with Michelin Aviator Tire 5.00-5 06-01097 $720.00 10ply Tubeless Weight: 8.9 Lbs
Lancair 320, Nose wheel kit as described above, 360 (retract- with Lamb Tire 11x4.00-5, 8ply 06-01098 $558.00 able LG) Weight: 5.9 Lbs Lancair Nose wheel kit as described above, legacy (re- with Lamb Tire 11x4.00-5, 8ply 06-01099 $633.00 tractable LG) Weight: 5.9 Lbs Glasair III Nose wheel kit as described above, (retractable with Lamb Tire 11x4.00-5, 8ply 06-01101 $558.00 LG) Weight: 5.9 Lbs Nose wheel kit as described above, Zenair CH601 with Michelin Aviator Tire 5.00-5 06-01102 $720.00 10ply Tubeless Weight: 9 Lbs
Direct replacement for Brock and Gerdes 4 nose wheel. Use with 2.80-4 8 diameter tire on VE, LE, Cozy, etc. or with 4.10-4 10 diameter tire on Cozy Mark IV Genuine Timkin Felt Seals CNC precision Machined to exact tolerances Weight 1.87 lbs. Corrosion resistant finish Static Load Rating 900 pounds. Model 49-3A P/N 06-00842.. $176.50 TIRE: Uses 2.80/2.50; 4 ply tire ..................... PN 06-08000..... $46.50
162-28 162-02800 Outer Wheel 1 1 - 1 - $340.95 162-36 162-03600 Outer Wheel - - - - 1 $365.95 08231 214-00300 Cup Bearing 1 1 1 1 1 $15.75 12 217-1 217-00100 Grommet 1 1 1 1 1 $5.96 161-31 161-03100 Inner Wheel Half Assy. 1 1 - 1 - $355.95 4 161-38 161-03800 Inner Wheel Half Assy. - - - - 1 $416.95 5 08231 214-00300 Inner Cup Bearing 1 1 1 1 1 $15.75 8 103-1050 AN4-22A Bolt 3 3 3 3 3 $0.39 * 095-10400 AN960-416 Washer 6 6 6 6 6 $0.03 * 094-10300 AN365-428A Nut 3 3 3 3 3 $0.10 153-1 153-00100 Ring-Grease Seal - - - 4 4 $9.75 9 153-8 153-00800 Ring-Grease Seal 4 4 - - - $11.35 21-104 153-00200 Ring-Grease Seal - - 4 - - $9.80 10 155-2 155-00200 Ring-Snap 2 2 2 2 2 $15.25 154-1 154-00100 Felt-Grease Seal - - - 2 2 $11.00 7 154-00600 Felt-Grease Seal 2 2 - - - $8.50 154-6 08125 214-00400 Cone-Bearing 2 2 2 2 2 $43.60 6 500 X 5 NOSE WHEEL with 1-1/4 dia. bearings. Model No. 40-77A, used on some models of Cessna 150, is typical of nose wheels used on general aviation aircraft. FAA-approved. P/N 40-77A............................ $595.00 600 X 6 NOSE WHEEL with 1-1/2 dia. bearings. Model No. 40-76A (not illustrated) is used on some models of Cessna 172 and 182. FAA approved. P/N 40-76A .......................... $564.00 2
TIRE:
The perfect nose wheel for light sport aircraft such as the KR and Soneri. Static Load Rating 900lbs Genuine Timkin Bearings Uses 3/4 Axle Felt Seals Weight 1.98 lbs Model 49-1A .............P/N 06-00843 ..... $184.95 Uses 400 x 8 ply tire ..............PN 06-00844 ........ $54.00 Uses 4.10 x 3.50 x 4 ply tire ...PN 06-08102 ........ $22.50 Cast aluminum wheels with 4 hub, for homebuilts and sailplanes. Used on Tri-Q conversion as nosewheel. 3-1/4 wide. Complete with 5/8 dia. ball bearings. Wt. 1-1/2 Lbs. P/N 06-16540 ..... $47.90 Ea.
GO-CART WHEELS
268
#199-52 NAVION Description Qty CONVERSION KIT Wheel Assy. 2 Brake Assy. 2 Complete kit for co version Spacer 2 to Cleveland 700 x 8 main Spacer 2 gear and 600 x 6 nose Nose Wheel Assy. 1 wheel on Navion Models Spacer 2 A, B, C, D, E, F, G & H. P/N 199-52 ........$4,215.00 Dust Shield 2 Screws 6 Washers 6 #199-52A NAVION Hydraulic Line 2 CONVERSION KIT Installation Drawing NLG 1 Kit for conversion of Installation Drawing MLG 1 maingear only. Supplemental type cert. 1 P/N 199-52A ...... $3,779.00
CM WP ME HA AP LG EP CS IN EL AV
Description Part Number Qty. Wheel Assembly 040-07502 2 Brake Assembly 030-05200 2 Installation Drawing (210 series) 50-34 1 Installation Drawing (180,185,206 Series) 50-35 1 Supplemental Type Certificate (210 series) 1 Supplemental Type Certificate (180,185,206 Series) 20-64 1
NOTE: Kit to be used only on aircraft with 6.00 x 6 tires.
Description Wheel Assy. Brake Assy. Bushing Bushing W & B Assembly Dwg. Installation Instructions Installation Instructions Installation Instructions Supplemental Type Certificate
Part Number 040-09701 030-06301 145-02200 145-01000 20-134 50-24 50-25 50-26
Qty. 2 2 8 4 1 1 1 1 1
P/N 199-48 ............................................................................................... $2,792.00 P/N 199-48C (Chrome) ............................................................................ $2,924.00 Wheel and Brake Conversion Kit (6 00 X 6) for Globe Swift Models GC-IA, GC-IB. NOTE: It will be necessary to change master cylinders and obtain the necessary axle hardware for conversion, Ref. dwg. 50-28. These parts can be obtained through Beech aircraft.
GLOBE SWIFT
Description Wheel Assembly Brake Assembly Installation Drawing Supplemental Type Certificate
Qty. 2 2 1 1
Description Brake Assembly Wheel Assembly Spacer W & B Assembly Dwg. Installation Drawing Supplemental Type Certificate
Qty. 2 2 2 1 1 1
Qty. 2 2 1
NOTE CESSNA CROSS REFERENCE NUMBERS (1) C-163030-113(LH) C-163030-114(RH) (2) C-163001-0104
Description Brake Assembly Wheel Assembly Spacer W & B Assembly Dwg. Installation Drawing Supplemental Type Certificate
Qty. 2 2 2 1 1 1
Qty. 2 2 1
TO PS BV
NOTE CESSNA CROSS REFERENCE NUMBERS (1) C-163030-011(LH) C-163030-112(RH) (2) C-163001-0104
Description Brake Assembly Wheel Assembly Spacer Spacer W & B Assembly Dwg. Installation Drawing Supplemental Type Certificate
Qty. 2 2 2 2 1 1 1
NOTE: It will be necessary to change master cylinders and obtain the necessary axle hardware for conversion, Ref. dwg. 50-27. These parts can be obtained through Beech aircraft.
269
MATCO mfgs MCMC-4 master cylinder uses a REMOTE reservoir. The MCMC-4 can be used in individual or dual brake applications. Buna-n orings are used in this assembly. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals. The MCMC-4 master cylinder measures 8.05 +-0.25 inches from end to end and 7.5 +-0.25 inches from mounting hole to mounting hole. A 0.625 inch diameter piston is used. Available stroke is approximately 1.388 inches and displacement is 0.43 cubic inches. The ports on all MATCO mfg master cylinders are 1/8 inch NPT (except the MC-4E). The MC-4 has an adjustable clevis. UNIVERSAL - Vertical or horizontal mounting with exterior reservoir. MC-4 ............................................................... P/N 06-11150.......$86.50 MC-4A (0.50 shorter than the MC-4) ............ P/N 06-11100.......$89.95 Replacement O-Rings for Master cylinders ... P/N 06-11200...$0.55/ ea
RESERVOIR
Repair kits are available for the following BERINGER parts: Hand master cylinder, Rudder pedal master cylinder, 2 and 3 piston brake caliper. Includes all wear parts: pistons, seals, screws, grease, repair procedure.
Description Repair kit for rudder pedal master cylinder HBA01: all piston seals, specific grease, ball bearings, copper seals, instructions Repair kit for 2 piston caliper : piston seals, pistons, specific grease, copper washer Repair kit for 3 piston caliper : piston seals, pistons, specific grease, copper washer
Part No.
Price
06-01116 $108.00
MATCO mfgs MCMC-5 master cylinder uses a INTERNAL reservoir. The MCMC5 can be used in individual or dual brake applications. Buna-n orings are used in this assembly. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals. The MCMC-5 master cylinder measures 8.25 inches from end to end and 7.7 inches from mounting hole to mounting hole. A 0.625 inch diameter piston is used. Available stroke is approximately 1.388 inches and displacement is 0.43 cubic inches. The ports on all MATCO mfg master cylinders are 1/8 inch NPT (except the MC-4E). The MC-5 has an adjustable clevis. The MC-5 can not be used in series with a second MC-5 or MC-5A
MC-5 VERTICAL
Brings exceptional brake feeling, using the AEROTEC three ball bearing patented system, aluminum red anodized, fully CNC machined. Available ONLY for DOT4 brake fluid. Weight: 10oz. Works in all postion. To mount on 0.86 (22mm) axle or directly on flat surface with 2 screws. DO NOT USE MINERAL 5606 FLUID Hand master brake cylinder for DOT4 built-in reservoir (red anodizing color) P/N 06-01485 ......................$387.95 Hand master brake cylinder for DOT4 built-in reservoir (red anodizing color) with parking brake pin P/N 06-01486 ......................$416.95
VERTICAL STYLE - Cylinder for vertical mounting, with steel housing and reservoir. MC-5........................................ P/N 06-11000.......$91.50 MC-5A (0.50 shorter than the MC-5) ............ P/N 06-00375.......$99.85 MC-7 MASTER CYLINDER - The black anodized MC-6 is designed to
attach to a 1 diameter control stick and function similar to a motorcycle brake. Designed for ultralight aircraft, it is completely self-adjustable as the lining wears and draws additional fluid from the cylinder. The 6:1 mechanical leverage allows the average pilot to generate 1,500 psi in the system. MC-7 ..........P/N 06-00014 ......$159.85
270
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Universal brake bleeder fitting. Fits all standard brake systems. 1/8 male NPT Seat is brass. Bleeder screw is stainless steel. P/N 11225 ....................... $6.95 Ea.
Our Brake Bleeder Tank features a hand operated pressurizing pump for field use. It fills and bleeds in one operation. The high-impact plastic reservoir great for petroleum and water-based hydraulic fluid. NOT for use with Skydrol. You get everything needed including a universal adapter which will fit onto all brake receptacles. Note: On Cleveland brake assemblies using a 79-3 bleeder screw the additional adapter 06-11414 is required. 225DX Economy Bleeder Tank ...............P/N 06-11413-1 ............$84.50 Option Adapter for Brake Bleeder ...........P/N 06-11414 ...............$19.75
This easy to use system allows you to quickly and easily bleed and flush your brakes without the aid of another person. By using a reverse flow system, combined with slow fluid flow, one person can fill an empty brake system in less tahn 15 minutes without having air in the brakes. Works on most high wing aircraft and does not require compressed air. This system is so easy that once you atrt the process you can walk away; come back in 15 minutes later and the job is done. Not FAA approved. P/N 06-00120 ................$85.35 Machined from 6061-T6 billet and anodized for improved corrosion resistance. Available with choice of filler port location for firewall or floor mounting. Capacity 5 oz. Size: 2-1/4 dia. x 2-1/2 long. Wt: 7oz. Specify style. P/N A-315 (firewall mounting) .................... $39.85 P/N A-315-1 (floor mounting). .................... $43.50
Lightweight translucent plastic reservoir with aluminum anodized cover and brake fluid level indication. No leakage of fluid with flexible gasket. Use only DOT4 brake fluid in this reservoir. Working capacity: 0.3 cu in, total capacity: 0.67 cu in. Includes: 1 reservoir, EPDM hose 1.5 ft, stainless steel clamp. .........................................P/N 06-01105 ...$69.75
Petroleum-base hydraulic fluid for use with brake and hydraulic systems with synthetic rubber seals. Meets specification MIL-PRF-5606H. Colored red. P/N 09-27110 ...... Pint ............................... $5.75 P/N 09-27000 ...... Qt. ................................ $9.85 P/N 09-27100 ...... Gal. ............................ $33.75
Machined from 6061T6 billet. Cap is threaded into body and sealed with a Viton o-ring for easy filling and cleaning. Cap and body have 1/8 female threads. 1-3/8 dia. x 2-3/8 high. Capacity 1.8 oz. Can be threaded directly into master cylinder port. Two units required on most installations (one per master cylinder). Supplied with vented plug in cap and 1/8 NPT male fitting in body. P/N 06-00391 ......$22.85 ea.
A mineral-based hydraulic oil with low temperature characteristics capable of operating over a wide range of temperatures. Oxidation inhibited, and contains a special antiwear additive. Dyed red for identification and leak detection purposes. Can be used in both aviation and non-aviation systems with synthetic rubber components, but should not be used in systems that incorporate natural rubber.Quart ....P/N 09-00774 ...................$7.95 Case ......................................................P/N 09-00773 ...............$173.00
Machined from 6061T6 billet and anodized for improved corrosion resistance. Attaching bracket is included for firewall or other installation. Extra capacity of 70 ml. Supplied with vented plug in cap and outlet has a female 1/8 NPT thread. P/N 06-01480 ............$39.65
This quality brake reservoir is manufactured from 6061 T6 aluminium and tig welded, finished in an anodized red. P/N 06-01494 ..........$175.00
Maxima Brake Fluid is now available in SYN DOT 4 Hi-Temp, DOT 4 and DOT 5 Silicone. The racing grade has a minimum boiling point of 600F which assures fade-free operation under the most severe use. All three Maxima Brake Fluids are advanced glycol blends with the latest additives to maintain your hydraulic brake and clutch system in top condition and prevent vapor lock. SYN DOT 4 Hi-Temp and DOT 4 are compatible with other DOT 3 and DOT 4 brake fluids. Features Exceeds current SAE J1703, J1S K2233 and U.S. and FMVSS116 DOT 3 & 4 specifications. Recommended for all U.S., U.K., Japanese and European motor cycles. Anti-vapor lock formula Mixes with other DOT 3 and DOT 4 brake fluids P/N 06-01497.............. $7.95
271
TAPER SHIMS
Miniature inline hydraulic manually operated ball valve. Fits in the bottom of the Master cylinder. Just pull the brake handle and hold the pressure and turn the lever on the ball valve. Let go of the handle and the ball valve holds the pressure until you release the lever back. 1/8NPT Female x 1/8/NPT Male Chrome Plated Brass Valve 1.7 overall length. P/N 06-00971 ....................$18.75
For builders using a 600x6/500x5/GAC/Azusa bolton axle, The solution to most minor alignment issues (0 to 3 adjustment). This simple solution uses a pair of specially tapered discs that are mated and rotated in any combination needed to orient each axle to its correct alignment. Each 3 dia. disc is machined and laser-cut from aircraft grade 6061 T6 aluminum. A pair of discs is used on each side. FAA-PMA approved (BDS-101) Sold as a set of 4 discs. P/N 06-00415 .................$118.50
DIAL-A-DEGREE SHIM
Innovative design allows control lever to be attached in any of four positions as well as on either side of valve body. Internal poppet valves insure easy, secure operation. Body is drilled for mounting with two 3/16" bolts. Valve body dimensions: 1.5"x2.0"x0.75". Control arm has 06-01261 45 of travel. Max operating pressure: 1,200 psi. For use with MIL-H-5606 Hydraulic Fliud. Weight: 0.32 lbs. Side or top inlet ports: 1/8"NPT * Outlet ports: 1/8" Female NPT or -4 Flare. Part No. 06-01260 06-01261 06-01262 06-01263 Inlet Top Side Top Side Outlet 1/8" NPT 1/8" NPT -4 Flare -4 Flare Price $169.95 $169.95 $168.75 $169.95
Aluminum valve as used in production aircraft with Model A-110 master cylinders for dual brake installations. Complete w/AN flare fittings. P/N 60-5 $439.00
Lightweight parking brake valve, aluminum anodized, fully CNC machined, for dual brake installations. Available for mineral-based fluid type MIL-H-5606 or DOT4 brake fluid. Complete with fittings, Wt. 6oz Max. operating pressure: 1450 PSI Features: Lightweight parking brake valve, Aluminum anodized. Available for mineral-based fluid like MIL-5606 or synthetic DOT4 fluid. Machined from billet on CNC. Max. input pressure: 1450 PSI
Description Part No. Price Beringer parking brake valve for DOT4 brake flu06-01107 $298.00 id, dash-3 fittings (3/8X24), red anodizing color. Beringer parking brake valve for mineral-based fluid MIL-H-5606, dash-4 fittings (7/16x20), blue 06-01108 $298.00 anodizing color.
Used on high pressure strut pump hose. High pressure connection with a swivel nut and female 1/8 NPT port on other end. P/N 06-11700 .........$15.95 Replacement Seal ...P/N SK2043-5 ......... $0.32
Light weight, and easy in-line installation The overall dimensions of this product are a slim 2.3" X 0.75" X 0.75". P/N 06-01267 .....$96.95
AN6287-1 strut valve for operating pressures up to 3000 PSI. Consists of a 3-piece stainless steel body, high-pressure valve core and MS20813-1B cap. P/N 06-00395 .......... $24.85
STRUT VALVE
#2300HV (Long Type, Length 1-3/16) Operating pressure range 70-2000 PSI from -10 to 165F. Conforms to AN8091. P/N 06-00397 .........$3.95 #9914A (Short Type, Length 7/8) Same operating range as #2300HV, but doesnt conform to AN809-1. P/N 06-00396 .........$1.80
A heat-resisting cap designed to withstand high pressure conditions. Has special rubber sealing washer. P/N 2525..................... $2.95 Ea.
272
AXLES
HOMEBUILDERS MAIN GEAR AXLES
This tools allows for safe, simple, & quick bungee replacements on all Piper Comanches. Requires no dangerous levers, jacks, or vices, & does not subject the bungee cord to damage. Detailed instructions included. Open End Ratchet for use w/Bungee Tool ...... P/N 12-00913 ..... $31.50
CM WP ME HA
500X5 AXLE - Machined from 2024T3 aluminum. Gold anodized per specification MIL-A-8625C, Type II for improved corrosion resistance. Length 5-3/4. Mounting bolt pattern is four equally spaced 1/4 dia. holes on 1-15/16 dia. bolt circle. Thread size: 1-1/4 x 16. P/N 11701 .......... $42.50 Ea. 500X5 AXLE - For 199-152 heavy duty discs (as used in Cozy). Same as #11701 axles above except 6 long and without undercut between bearings. P/N 11701-2 .............. $44.75 SPACERS FOR 500 X 5 AXLE - 2 required per axle when used with Cleveland wheels. Not required on 600x6 size. P/N 11716 ............ $4.95 Ea. EXTRA WIDE SPACER FOR 500X5 AXLE - 7/16 wide as used on 199152 heavy duty discs. 1 required per axle with P/N 11716 (Use Axle # 11701-2) P/N 11716-2 ......... $6.25 Ea. 600X6 AXLE - Similar to 500 x 5 size but 1-1/2 dia. x 6-1/4 long. Two 5/16 dia. and two 3/8 dia. mounting holes on 2-1/4 dia. bolt circle. Thread size: 1-1/2 x 16. P/N 11702 .......... $65.25 Ea.
#6035 (38-830)(Short Type) Operating pressure range 0-400 PSI from -65 to 350F. P/N 6035 ............ $0.55
For 500X5 Wheels w/Wheel Pant Stub - Diameter: 1.25 Material: Solid 2024-T3 aluminum w/anodized finish Hole Pattern: 1-15/16 bolt circle; 1/4dia. holes. Requires (2) P/N5710 spacers per axle. P/N 06-00601 .........................................$59.50
GROVE AXLES
AP LG EP CS
For 600X6 Wheels w/Wheel Pant Stub - Diameter: 1.5 Material: Solid 2024-T3 aluminum w/anodized finish Hole Pattern: 2.25 bolt circle; (2) 2-15/16 dia. bolt holes & (2) 2-3/8 dia. bolt holes. P/N 06-00602............... $82.75
500 X 5 AXLE - For use on welded type gear. Fabricated from 1-1/4
O.D. x .120 wall 4130N steel tubing. Precision ground for proper bearing fit. One end threaded 1-1/4 x 12 for round axle nut. 12 long. P/N 11703-1 ....... $31.75 Ea.
I.D.: 1.25", O.D.: 1.438", Thickness: 0.360", Used with 5015 axle, 1 (one) required per axle. P/N 06-01504 ...................... $5.95
IN EL AV TO PS BV
600 X 6 AXLE - For use on welded type gear. Fabricated from 1-1/2
O.D. x .120 wall 4130N steel tubing. Precision ground for proper bearing fit. One end threaded 1-1/2 x 16 for round axle nut. 12 long. P/N 11704-1 ....... $34.75 Ea. I.D: 1-1/4 O.D. 1-3/4, Thickness: 1/4, Used with 500x5 axle, 2 required per axle. P/N 06-00852 ...................... $5.90
Castle type nuts manufactured to MIL Specification MS21025 using 4140 steel. Mild steel nuts are not acceptable for use on certificated aircraft. 1-1/4 dia. nuts for 500 x 5 axles, 1-1/2 dia. nuts for 600 x 6 axles. Nut Type Matco ----ACS ACS Grove Castle Castle Castle Round Round Round Thread 5/8-18 1-1/4-16 1-1/2-16 1-1/4-12 1-1/2-16 1-1/4-12 Axle Type Matco Cessna Cessna Piper Piper Piper Part No. 06-11815 06-11800 06-11900 11725 11726 06-00937 Price $2.35 $11.75 $12.90 $8.90 $8.95 $15.50
AXLE NUTS
For use on flat spring landing gear, Cessna models 170, 172, 180, 182, 185 and 206. It is highly recommended to replace aluminum axles with these much stronger steel axles when operating on rough conditions, with larger wheels or on skis. FAA-PMA approved. P/N 05-00481 ................. $369.85
These 1-1/4 - 16 Castle axle nuts are similar in size & design to pn 06-11800 and are for homebuilts only. Used on Cozy and many other designs PN 01-00814 ................... $9.50
A custom fabricated 4140 steel heat treated shaft with rolled 1/2-20 threads on both ends Used a gear attachment on Cozy Mark IV. 10.75L. 2 required. P/N 01-00254 .......... $38.50
273
High pressure springs fabricated from alloy steel for top performance and long spring life. The Claude Gray shock absorber design has been service-proven on the EAA Biplane, Miniplane, Pitts and others. Over 1,000 pair in use. Length 6, 2 O.D., 1 I.D.. Wt. 4-1/2 lbs. per pair. Spring deflection 0.7 per 1,000 lb. force. Set of two springs. ...........................P/N 06-13200 ................ $95.75 Discount 10% on 6, 15% on 12
Landing gear strut packing seals shrink due to fluctuating weather conditions and age. This specially engineered hydraulic chemical additive leaves a protective coating on the strut shaft and allows the seal to expand to its normal size. It will stop strut leaks and is an excellent lubricant and corrosion preventative. Application is fast and easy - any owner or pilot can do the job in minutes. FAA approved. Single-Strut Kit ......................................P/N 06-13300 ................ $29.75 3-Strut Kit (Single Engine).....................P/N 06-13400 ................ $44.85 3-Strut Kit (Medium Twins)....................P/N 06-13500 ................ $55.75 Large Twin kit (16 oz0 ...........................P/N 06-00110 ................ $97.50 Granville Strut Additive (Pt.) ..................P/N 06-00111 ................ $73.50
*1st dimension is cross section; 2nd dimension is inside dia. of ring. HD - Heavy Duty, higher test rings. ***6 Rings for J-5. HDX - Extra Heavy Duty. CW (Cold Weather) shock rings available on Special Order basis. Prices are approx. twice that of standard shock rings. Add -CW to standard part number when ordering.
MIL-C-5651D TYPE I SHOCK CORD: This cord has a double cover of glazed cotton over natural cotton. It has 3 markers: 2 for the year and 1 for the quarter. The certifiable cord sizes of Type I are: 1/4, 3/8, 1/2, 5/8
SHOCK CORD
TYPE 1
Dia. Part No. (In.) 1/8 1/4 5/16 3/8 06-12100 06-12200 06-12300 06-12400 Price/Ft. Dia. Less Than 100 Ft. (In.) 100 Ft. Part No. $0.42 $37.80 1/2 06-12500 $0.67 $60.30 5/8 06-12600 $0.74 $66.60 $1.22 $109.80 Price/Ft. Less Than 100 Ft. $1.98 $4.60 100 Ft $178.20 $414.00
These cone spring hooks and locking rings are used as terminal fasteners. Insert cord through small end of cone. Apply and crimp locking ring about 1/2 from end of cord, pull cord back until locking ring contacts inside of fastener. Cut ends of cord may Shock Cord Size Fastener P/N Price/Set be sealed by dipping 1/4 06-12800 $0.85 in rubber cement. Set 3/8 06-12900 $1.26 includes cord and 1/2 06-13000 $2.25 locking ring.
This handy new tool installs standard shock rings on most aircraft without the great effort required in the past. This tool is designed for use with the shock cords shown above. Our price is the best anywhere. P/N 06-16600 ................ $237.95
Lower damage risk with the right tool Complete control of bungee shock cords coming off Complete control of bungee shock cords going on. E-Z instructions with detailed drawings Safe landings depend on new cords every few years. P/N 06-00419 .............. $79.85
Straight - Fits: PA-24, SN 24-1 through 24-4782 & 24-4784 through 24-4803 P/N 12-02095 ..... $59.50 Angled - Fits: All PA-30s, PA24, Serial number 244783, 24-4804 & up P/N 12-02094 ..... $89.50
PITTS - S1 quality landing gear at excepS1-11B SuperStinker tional pricing. NOTE:Request landing gear Baby Lakes layout sheet when placing VP1 - 1100B Free order or quotation Request for custom landing gear to verify Standing No Cables correct gear for application. Zenair CH701
These custom landing gear are fabricated from aircraft grade 2024T3 aluminum. After cutting and milling, they are annealed to O condition for bending, and then heat-treated to Aircraft Type Part No. Price T6 condition for exceptional KITFOX - Mod 3&4 TD 06-04025 $1,693.00 strength and durability. Top
06-03915 $1,300.00 06-04035 $1,575.00 06-04070 $1,125.00
274
RUDDER PEDALS
Professionally made black powder coated aluminum pedals as used in production aircraft. Approved by Rutan Aircraft Factory for use on the Defiant. 5W x 6L. Wt. 3/4 lb. ea. P/N 06-00392 ........... $68.75 Pr. Discount Less 10% on 6 Pr., 15% on 12 Pr., 20% on 20 Pr.
CM
P/N 06-00838 P/N 06-00839 P/N 06-00641
WP ME HA AP LG
For use with any standard master brake cylinders. 2-piece design. Completely finished, assembled, ready for installation. Wt. 2 lbs. each. P/N 11350 Set of 2 $93.65
Discount Less 10% on 6 Pr. 15% on 12 Pr., 20% on 20 Pr.
This rugged pedal set (left & right) features built-in stops, (4) 1/4 pre-drilled holes to allow adjustable rod connections and a 5/16-18 x 1-3/4 long mounting bolt. Wt 7oz. ea. length 6.5 P/N 06-00107 ............ $11.50 /set
The Saircorp/Flight Boss Ltd S-RPE Series Rudder Pedal Extensions fit most high wing Cessna aircraft from 1953 to 2008. Refer to Application Chart or AML for proper selection by visiting our website. These are constructed from high quality cast aluminum, have a durable Powder Coat finish and use Stainless Steel fasteners. They are strong, durable and built to last. Installation and removal is quick and easy, the extensions lock in place over your existing rudder pedals giving you that extra needed reach. Your existing rudder pedals do not need to be removed or altered for installation or removal of the extensions. No more struggling or submarining to get that extra needed rudder deflection. Even robust and taller pilots can benefit from the S-RPE Series Rudder Pedal Extensions, they allow you to set back and get the yoke out of your chest. They can be installed and used right seat, left seat or both. EXT S-RPE-C - fits most 1960s to 1980s ..... P/N 06-00838 ... $437.00 EXT S-RPE-CN - fits most 1980s to 2000 and up P/N 06-00839 ... $459.00 EXT S-RPE-CO - fits most 1950s to 1960s .. P/N 06-00841 ... $437.00
EP CS
4-1/2 Long.
These rudder pedals have been designed and optimized for the Lancair Legacy -- though they are easily integrated into other aircraft. They are overhead mounted, pilot adjustable and provide very precise, smooth rudder and brake control. Overhead mounting. Easily adjust for leg length by turning a small crank just behind the instrument panel. Brake master cylinders not included.* Weight: 8 lbs * Width: 14.4 in * Height: 10 in * Depth: 18 in * Rudder cables not included. Lancair ........................................... P/N 05-04406 ....................$1,259.00
IN
These Universal Heel Plates can be installed in any aircraft without fasteners or hardware. Velcro secures them to the floor or carpeting. The Heel Plates are available in 22 gauge stainless steel and are furnished with a clear finish. The stainless plates are available in brush finish only. Plates are 8 wide x 12 long with Velcro strips supplied, but not mounted, Sold in sets of two plates. Not FAA Approved. Stainless steel brush finish heel plates ............05-00839 .... $69.95 SPECIAL ORDER COLORS AVAILABLE
EL AV TO PS BV
Designed for single or two place tandem seating experimental aircraft. The pedals are aluminum castings and the hinge bracket and pedal pivot pin are constructed from 4130 steel tubing. The pedals have an attachment point (1/4 hole) at the top to link the toe brake from the rear cockpit to the front cockpit only 2 master cylinders required). To mount the pedals the builder will need 2 steel bushings 3/4 long to weld through the fuselage and a tube to put through the bushings and the bottom tube of the hinge bracket. Will work well in almost any homebuilt aircraft. Single Place Kit .............................. P/N 06-17015 ................. $229.95 Two Place Tandem Kit ................... P/N 06-17025 .................. $357.95
Designed for the Loehle 5151 Mustang/P-40 these rudder pedals can easily be adapted to many light sport planes and ultralights. Made from spaceage polycarbonate, a material that is used when strength, light weight and durability are a necessity. Sample rudder pedals were shot with a .22 long rifle at a range of 10 yds, bullets failed to penetrate the 1/8 inch thick polycarbonate. Builder will have to fabricate simple back plates from either 1/8 thick birch plywood or 1/8 thick aluminum. An easy to understand detailed drawing is furnished with each set of rudder pedals. Specifications: Wt: 5.2 oz., Width: 4-1/8, Height: 9. P/N 06-00001 ............................ $68.50
275
TAILWHEELS
LANG TAILWHEEL PARTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
1&2 A-501, A521 06-13601 1 3&7 A503, A507 1 06-01570 5&6 A-505, A506 1 4 A-504 06-13604 1 8 9 10 11 A-509 A-512, A560-1 A560-2 C-501 A-516 06-13608 1 06-13609 1 06-13610 1 06-13611 1 1 3 2 2
Price Ref Lang Price Part No. Qty Each No. No. Each --$4.95 16 A-522, -A-523 & A-524 06-13600 1 $19.75 $18.90 $15.90 17 A-521 06-13617 1 18 A-531 06-13618 1 $5.90 19 A-546 06-13619 1 $11.50 20 A-547 06-13620 1 $1.34 $0.05 $3.20 $18.80
$57.50 21 C-503 06-13621 1 $158.95 $6.00 22 A-554 06-13622 2 $13.60 $2.35 $2.85 $5.95 $1.42 $78.95 24 A-508 06-13624 1 $12.50 25 A-511 06-13625 1 $46.50 26 A-510 06-13626 1 $28.65
12 A-544, A545 06-13800 2 $127.95 23 A-525 06-13623 1 13 A-590 06-15800 14 A-548, A549 06-13614 15A A-518 13287 15B A-519 13286
THE ONLY TAILWHEEL TO MEET THE EXACTING REQUIREMENTS OF THE CHRISTEN EAGLES - The Lang Model D-501-A Tailwheel is full swivel, fully automatic and steerable. It is impossible to throw the Lang tailwheel into full swivel unintentionally regardless of rough field conditions or cross winds. This tailwheel will not lock in any position except steerable, but releases easily when plane is pushed sideways or backwards by hand or when maneuvering plane on ground using brakes. The Lang tailwheel fits both 1-1/4 and 1-1/2 leaf springs. Drop forged, heat-treated 4130 chromoly steel fork of single arm type. The cast aluminum wheel is grease packed for 100 hours service. The 6 x 2.00 solid rubber tire has interior wire reinforcement for added strength. Manufactured by ACS Products Co. under FAA-PMA. All replacement parts available. The Lang tailwheel is FAA-approved for installation on many light aircraft including Aeronca 7AC, Piper J-3 and PA-12, Cessna 140, Luscombe and Taylorcraft. Comparable to Scott Model 2000. Wt. 6 Lbs. OEM & DISTRIBUTOR PRICING AVAILABLE P/N 06-00398 ........................... $965.00
HUB ASSY (2 #12 Hub Halves, 3 #14Bolts & Nuts) .. P/N 06-13800 .$127.95 HUB ASSY W/ BEARING CUPS................................ P/N 06-13900 .$152.95 WHEEL ASSY (Hub Assy & 2 Bearing Cups & Cones) . P/N 06-14000 .$264.95 WHEEL & TIRE ASSY (Wheel Assy & 6 x 2 Tire) .... P/N 06-14100 .$379.95
We have 5 versions of Raven locking tailwheel assemblies. They come with polished stainless springs plus any and all brackets and tubing to mount the tailwheel. 4 models are for aircraft like the Pitts S-1 6 Weld-In Model etc. and are good up to 1250 lbs gross weight. The tailwheel assembly is 21 long and weighs 5lbs. 6 models are for aircraft like the Christen Eagle Pitss S-2 etc. and are good up to 1900 lbs gross weight. The tailwheel assembly is 24 long and weighs 7lbs. 4 weld in tube model, straight spring with tube to weld into fuse P/N 06-00121 ...................$417.00 4 bolt on model, angled spring with 3/8 hole and bracket for tail post P/N 06-00122 ...................$542.00 6 weld in tube model, straight spring with tube to weld into fuse P/N 06-00123 ...................$514.00 6 bolt on model, angled spring with 3/8 hole and bracket for tail post P/N 06-00124 ...................$684.00
4 Bolt-On Model
Tail wheel, fully CNC machined, static load: 330Lbs, for tyre 200x50 Aluminum anodized Tailwheel for 200x50 or 200x65 tube type tyre In 2 parts easily removable, with ball bearings Alloy: 2017 (AU4G) machined from billet on CNC For axis 08 mm (0.32) Weight: 9oz. P/N 06-00957 ...... $211.95
BERINGER TAILWHEEL
This is a replacement tail wheel for the Vans tail wheel assembly. The hub is made from 6061-t6 aircraft aluminum with a tire molded from 65 durometer SBR rubber. The design includes precision sealed bearings.5-1/2 Diameter X 1-1/2 Thick P/N 06-01284 ...... $129.85
276
TAILWHEELS
The Alaskan Bushwheel Tailwheel Assembly is an FAA-PMA (PMA # PQ1557NM, Supplement 9) eplacement part for the Scott 3200 assembly and parts contained therein, includes Heavy Duty Steering Arm. One Year Warranty. ABI-3200 Standard Tailwheel Assembly(3214 Standard Arm) ........................................... P/N 06-00836 ...........................$1,025.00 ABI-3200-3 direct replacement for the Scott 3200-3. .......................................................... P/N 06-01313 ...........................$1,161.00 ABI-3224A Standard Tailwheel Assembly(3214T Heavy Duty Arm)................................... P/N 06-00722 ...........................$1,025.00 ABI-3200B Tailwheel Tundra Assembly .............................................................................. P/N 06-00723 ...........................$1,890.00 ABI-800613-00 Pawnee 2-bolt Tailwheel Head .................................................................. P/N 06-00820 ..............................$294.85 ABI-2600A 4 wheel halves with 2.80x2:50x4 tire & tube mounted and ready to go.......... P/N 06-01190 ..............................$431.95
# Part No. Description Part No. Price 1 ABI-3216-00 Brackett Assy. 06-00724 $208.50 2 ABI-3241-3S**** Spacer 06-00725 $9.65 ABI-3243- Leaf Spring Adapter 06-00810 $48.65 3 02**** 1-3/4 to 1-1/4 ABI-3243- Leaf Spring Adapter 06-00811 $49.85 4 01**** 1-3/4 to 1-1/2 5 6 7 8 9 10 ABI-3207-00 ABI-3235-00 ABI-3233-00 ABI-3256-02 ABI-3206-00 ABI-3214T Fiber Thrust 06-00726 $6.35 Washer Thrust Plate Assy. 06-00727 $42.50 Compression 06-00728 $3.25 Spring Hvy-Dty Dust 06-00729 $22.90 Cap, Upper Thrust Washer 06-00730 $14.60 Hvy-Dty Standard 06-00731 $208.95 steering arm assy Standard Standard 06-00812 $208.95 steering arm assy PAWL 06-00732 $33.85 Hevt-Duty Dust 06-01264 $29.75 Cap, Lower Std. Duty Dust 06-00733 $28.75 Cap, Lower # 17 18 19 20 Part No. Description ABI-1863 Grease Retainer ABI-2504-1 Spacer AN960-816 Washer AN320-8 Shear Nut Cotter Pin Part No. 06-00746 06-00752 AN960-816 AN320-8 MS24665 -283 Price $8.45 $13.95 $0.06 $1.19 $0.03 $11.50 $2.30 $2.30 $7.75 $34.75 $5.50 $19.75 $1.63 $62.75
CM WP ME HA AP LG EP CS IN EL
21 MS24665-283 22 ABI-3222-00 23 24 25 26 27 28 29 30 ABI-3258-00 ABI-3258-01 ABI-3257-00 ABI-872* ABI-3225-00 ABI-3227-00 33475-008 ABI-S2*
Compression 06-00737 Spring Spacer 06-00738 Spacer 06-00739 Pin 06-00740 Axle (Heavy Duty) 06-00741 Tab Lock Washer 06-00742 Spacer 06-00743 Castle Nut AN310-8 Rim Spacer 06-00744 (Heavy Duty)
Std. Duty Dust 06-00813 $21.50 Cap, upper 13 ABI-3205-00 Bushing 06-00734 $15.60 Tailwheel Fork 06-00735 CALL 14 ABI-F1* (Heavy Duty) 14A ABI-3224** Tailwheel fork Std. 06-00736 $258.95 15 A4050 Cone Bearing 13286 $28.65 16 A4138 Bearing Race 13287 $46.50
* Parts not included in ABI-3200/ABI-3224A Assembly ** Parts not included in ABI-3200B Assembly Parts in red are not sold individually.
Wheel Half 06-00745 $114.95 (Heavy Duty) 32 ABI-7024 Bearng Race Seal 06-00746 $8.45 33 AN4-34A* Wheel Bolt AN4-34A $0.90 33A AN4-7A** Wheel Bolt AN4-7A $0.21 280 x 2.50 Tire 06-00748 $46.75 34A x 4** 35 33478-202 Self Locking Nut 33478-202 $0.10 AN960$0.03 36 1/4 Washer Flat Washer 416 37 T7201 Zerk Fitting 06-00753 $0.72 38 ABI-232-046 Dowel Pin 06-00749 $11.75 39 ABI-2602** Gasket 06-00750 $3.25 31 ABI-3244-00
**** Parts not included in assemblies.
The Model 2600 8 pneumatic tire and wheel assembly is used on the 3200, 3250, 3400 and 3425 Series tailwheel assemblies. The Model 3245-1 10 pneumatic tire and wheel assembly is used on the 3425 & 3450 Series tailPrice Ea. wheel assemblies. Total Wt. 3 lbs. 13 oz.
-$296.50 $4.70 $41.85 $3.45 $24.50 $12.50 $234.95 $28.50 $25.90 -$28.65 $8.25 $14.25 $0.02 $1.19 $0.02 $8.90 $2.35 $2.50 $6.95 $34.65 $5.60 $1.63 -------
3207 3234 3233 Spring, Compression 3235-2 Dust Cap 3206 Washer, Thrust 3214 Arm Assembly 3219 Pawl 3235-1 Dust Cap 3224 Fork Assy 13286 Cone Bearing 1863 Retainer, Grease 2504-1 Spacer 18107 Washer, AN960-816 18450 Nut, Shear AN320-8 18482 Pin, Cotter 3222 Spring 3258 Spacer 3258-1 Spacer 3257 Pin 3236 Axle Assy 3225 Washer, Lock 18443 Nut, Castle, AN310-8 3244 Wheel Assy 2600 Tire & Wheel Assy
Item No.
1 2 3 4 5 6 7 8 9 10 11 12 13
Part No.
3227 1863 1862 13286 13287 18438 33478-202 2598 2602 3228 06-08100 3223 3247
Description
Price Each
$7.50 $8.25 $8.75 $28.65 $46.50 $0.21 $0.10 --$2.45 $46.50 $54.00 $19.95 $21.50
AV TO PS BV
Spacer Retainer, Grease Spacer Bearing Cone (A-4050) Bearing Cup (A-4138) Bolt Nut, Self Locking Hub Gasket 8 Tire 10 Tire 8 Tube 10 Tube
2 2 2 2 2 4 4 2 1 1 1
2 2 2 2 2 4 4 2 1 1 1
277
TAILWHEELS
MAULE MODEL SFSA SOLID TAILWHEELS
CM WP ME HA AP LG EP
The SFSA tailwheel assembly is of the same type construction as the SFS-P8A unit except for the tire, which is a 6.50 x 2.50 soft rubber solid tire. Spring connector kit not furnished with this model. FAA-approved. Wt. 6 lbs. SFSA-1-4, for 1-1/4 Spring .............. P/N 06-16710 .................. $412.95 SFSA-1-2, for 1-1/2 Spring .............. P/N 06-16720 .................. $388.95 Replacement Tire & Bearings ........... P/N TW-23A .................... $143.00
An inexpensive 8 pneumatic tailwheel assembly which is steerable and full swiveling, with new improved single arm shimmy-free fork. All working parts heat treated. FAA approved. Wt. 7 lbs. Maule Tailwheel #SFS-P8A-1-4* .............P/N 06-16730 ...........$428.95 Maule Tialwheel #SFS-P8A-1-2** .............P/N 06-16740 ...........$428.00 McCreary Tire 2.80/2.50-4 4 Ply ...............P/N 06-08000 .............$46.50 McCreary Tube 280 X 250 X 4 ................P/N 06-08101 .............$19.95 * - For 1-1/4 Leafspring ** - For 1-1/2 Leafspring
CS IN EL AV TO PS BV
A new tailwheel with 8 pneumatic tire designed and engineered to meet the landing fields. SFS-P8B-1-4 ............... For 1-1/4 Leaf Spring SFS-P8B-1-2................. For 1-1/2 Leaf Spring SFS-P8B-3-4................. For 1-3/4 Leaf Spring
toughest conditions on all types of airports and Width ..............P/N 06-16750 ................$599.00 Width ..............P/N 06-16760 ................$599.00 Width ..............P/N 06-16770 ................$595.00
40 41 42 43 44
Description Part Number Part Number Retainer Washer TW-64 TW-64 1 Fork (with axle) Solid Rubber 06-00093 TW-61A-1 1 Axle TW-5 TW-5 1 Axle Sirclip Ring TW-6 TW-6 1 Bearing TW-A7 TW-A7 2 Inboard Wheelhalf, TW-30 TW-30 1 with bearings Tire, 8-inch 1 Tube 1 Outboard Wheelhalf TW-31 TW-31 1 Washer TW-A6 TW-A6 1 Lock Washer AN935-516 AN935-516 3 Bolt TW-A12 TW-A12 3 Hub Cap TW-32 TW-32 1 Hub Cap Sirclip Ring TW-33 TW-33 1 Cotter Pin AN380-3-3 AN380-3-3 1 Items 40 through 44 are used on the Old style & Pnematic tailwheel that have a shummy dampener. Adjusting Screw TW-40 1 Dampener Spring TW-41 1 Friction Block TW-42 1 Hex Housing TW-43 1 Bracket Assembly, TW-44-1-4 1 1-1/4 inch drilled Bracket Assembly, 1-1/2 inch drilled TW-44-1-21 -------
$0.78 $99.65 $31.75 $0.42 $74.75 $116.95 ------------$57.75 $0.95 $0.03 $1.89 $14.50 $1.56 $0.03
278
TAILWHEELS
P/N 06-01615
Matco tailwheels use a fiberglass reinforced nylon wheel with an operating load of 450 lbs. It takes over 5000 lbs to fail the wheel and it will hold up in the most rigorous conditions. Can be used with 1-1/4" or 1-1/2" leaf spring. These tailwheels are steerable, and are available with a 6 inch hard rubber solid tire or with 8" Shin pneumatic tire and tube for heavier aircraft. Tailwheel construction is anodized aluminum. Weight: 5 lbs.
P/N 06-01620
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Item Matco solid rubber tire tailwheel assy Replacement Tire (solid rubber) for T-6 Matco 6" Pneumatic the tailwheel assy. Replacement 6" Pneumatic Tire * Tube Matco 7" pneumatic tire tailwheel assy. Overall length of 10.50" and max width of this tail wheel with fully splayed arms is 9.29" and overall height is 10.2".
Part No. 06-01615 06-00004 06-00831 06-00832 06-01362 06-01620 06-01361 06-08000 06-08101
Price $149.95 $78.85 $178.95 $17.50 $201.15 $214.00 $239.00 $46.50 $19.95
P/N 06-00831
Matco 8" full swiveling pneumatic tire tailwheel assy Matco 8" pneumatic wide tailwheel assy. Overall length of 12.51". Max fully splayed arms is 9.29" and overall height is 15.7". Weight 8lbs. McCreary Replacement 8" Tire 2.80/2.50-4 4PLY McCreary Replacement Tube 8" 280 X 250 X 4
MATCO mfg produces a superior light weight dual fork seven inch tail wheel for use with tail dragger aircraft which require a lighter weight tail wheel-the T-7D. The T-7D tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees (earlier release available with optional steering arms WHLT-03A). The WHLTW37 wheel used on the WHLT-7D has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-7D features split rims for ease of mounting and dismounting its 7x1.75 tire and tube assembly. The T-7D tail wheel has a seven inch pneumatic tire and an overall length of 10.3 inches. Maximum width of this tail wheel with fully splayed arms is 7 inches and overall height is 10.3 inches. This machined aluminum tail wheel weighs 5.2 pounds. P/N 06-01527 ..................$380.17
MATCO DUAL ARM TAILWHEELS MATCO TAILWHEEL DUAL ARM 7 DUAL ARM TAIL WHEEL ASSEMBLIES INCH PNEUMATIC 8.5 INCH PNEUMATIC TIRE
The T-8WD tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees. The WHLNW40EE wheel used on the WHLT-8WD has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-8WD features split rims for ease of mounting and dismounting its 9x3.50-4 tire and tube assembly. Specifications: 8.5 inch pneumatic tire, Overall length of 11.7 inches, Maximum width of this tail wheel with fully splayed arms: 7 inches, Overall height is 11.9 inches, This cast aluminum tail wheel weighs 8.3 pounds. P/N 06-01531 ..................$435.62
The T-8LD tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees. The WHLTW37 wheel used on the WHLT-8LD has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-8LD features split rims for ease of mounting and dismounting its 200x50 (8x2) tire and tube assembly. Specifications: 8 inch pneumatic tire, Overall length of 10.8 inches, Maximum width of this tail wheel with fully splayed arms: 7 inches, Overall height: 10.8 inches, This cast aluminum tail wheel weighs 5.4 pounds P/N 06-01528 ..................$389.00
The T-10D tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees. The WHLNW50CC wheel used on the WHLT-10D has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-10D features split rims for ease of mounting and dismounting its 10x3.60-5 tire and tube assembly. Specifications: 10 inch pneumatic tire, Overall length of 13 inches, Maximum width of this tail wheel with fully splayed arms: 7 inches, Overall height: 13.3 inches, This cast aluminum tail wheel weighs 9.5 pounds P/N 06-01532 ..................$499.27
The T-8D tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees. The WHLTW40EE wheel used on the WHLT-8D has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-8D features split rims for ease of mounting and dismounting its 2.80/2.50-4 tire and tube assembly. Specifications: 8.5 inch pneumatic tire, Overall length of 11.6 inches, Maximum width of this tail wheel with fully splayed arms: 7 inches, Overall height is 11.8 inches, This cast aluminum tail wheel weighs 6.7 pounds. P/N 06-01529 ..................$399.51
LIGHTWEIGHT DUAL ARM TAIL WHEEL ASSEMBLIES 8.5 INCH PNEUMATIC TIRE
The T-11D tail wheel utilizes a dual fork configuration and incorporates a geometric release mechanism that allows the wheel to caster after reaching a steered angle of 40 degrees. The MH5N-S wheel used on the WHLT-11D has a .625 precision sealed ball bearing which is rigorously tested and designed to resist bearing fatigue providing a long bearing life. The arms and wings of the tail wheel fork assembly are composed of 4130 which is heat treated to a Rockwell 38-43 to ensure strength and are irridited to prevent corrosion. The tail wheel base and forks are cast and then black anodized to prevent corrosion as well. The wheel halves are die cast aluminum for light weight and superior strength. The T-11D features split rims for ease of mounting and dismounting its 11x6-5 tubeless tire assembly. Specifications: 11 inch pneumatic tire, Overall length of 13.5 inches, Maximum width of this tail wheel with fully splayed arms: 7 inches Overall height: 14 inches, This cast aluminum tail wheel weighs 9.6 pounds. P/N 06-01537 ..................$678.00
279
TAILWHEELS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
STEEL TAILWHEEL LEAF SPRINGS
Set No. 1 2 3 4 5 6 7* 8 9 10 Spring Width 1-1/4 1-1/2 1-1/2 1-1/2 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 Hole Dia. Fuselage End 7/16 Hole Dia. Tailwheel End 3/8 Distance Between Bolt Centers 12 Original Application Wt. No. of Lbs. Springs Part No. 06-14200 06-14300 06-14400 06-14500 06-14600 06-14700 06-14800* 06-14900 06-15000 06-15100 Price $115.95 $119.50 $132.95 $53.75 $139.95 $46.85 $189.75 $61.50 $199.75 $88.65 Piper J3, PA11, PA11, PA12, 3-1/8 3 PA14, PA15, PA17 3/8 3/8 10 T-Craft BC-12D 2-3/4 3 3/8 7/16 15 Aeronca 7AC, 11AC 3-1/2 3 3/8 3/8 15 Homebuilts 1-3/4 1 5/16 3/8 11-3/4 Luscombe 3-1/2 4 Main Leaf Only 11-3/4 Luscombe 1-1/2 1 5/8 7/16 13-1/8 Cessna 120-140 4 4 Main Leaf Only 13-1/8 Cessna 120-140 1-1/2 1 5/8 7/16 13 Cessna 170 5 5 Main Leaf Only 13 Cessna 170 1-3/4 1 DISCOUNTS LESS 10% ON 6, 15% ON 10 (ASSORTED) *P/N 06-14800 has two bends
A high and low frequency spring is used to upset the natural frequency of the tailwheel. The lighter spring is used on the left side. Compression Type Kit P/N 06-15150 ................ $43.85
TAILWHEEL TIRES
6X2 AERO CLASSIC SOLID TIRE Used on Scott 2000, Lang D-501A Tailwheels. Replaces Goodyear 6x2 tire. P/N 06-01044 ........ $59.85
6X2 GENERAL SOLID TIRE - A flexible rubber tire with four knobs on center hole. This is Scott P/N 1879 used on Scott Model 2000 tailwheels and some Scott 3-24B tailwheels. Also used on Lang D-501A tailwheel. Replaces Goodyear 6x2 (11 knobs) solid tailwheel tire.
P/N 06-15800 ...................... $78.95
Replace conventional springs with new compression type. Original tension type springs keep rudder post under continuous tension which wears the hinges. Compression type springs keep rudder neutral - no tension on post. Assures more effective steering action. Set of 2 stainless steel springs, (2) 1 chains, 4 connector clips: ........................ P/N 06-15600 ................ $24.85 Springs Only ................. P/N 06-15700 .............Ea $7.35 Connector Clips ............ P/N 06-15400 .............Ea $2.35 Chain ............................ P/N 06-15500 ............. $1.14/Ft
6.50 X 2.50 SOLID TIRE - Maule P/N 23 for Model SFSA tailwheels.
Tire Only ...................... P/N 06-00409 ............. $119.95 Tire w/ Bearings .......... P/N 06-00410 ............. $143.00
The Husky Tailspring is now available. The 3-leaf tailspring, mounting bracket & hardware is all included. This is a direct replacement for all of Sky International (Aviat Husky) tailsprings and eligible on all Husky aircraft, the A1, A1-A, A1-B and the new A1-C. Why do you need a new tailspring for your Husky? When a tailspring is sprung or weak and/or of poor design that it puts the camber angle of the tailwheel into a negative position, therefore causing the tailwheel to shimmy, be hard to steer and increases the wear on everything. P/N 06-01364 .............. $219.00
HUSKY TAILSPRING
2.80/2.50 X4 MCCREARY PNEUMATIC TIRE - Used on Scott Model 2600 8 wheel assembly. Tire .............................. P/N 06-08000 ............... $46.50 Tube ............................ P/N 06-08101 .............. $19.95
RUDDER ARMS
10 X 3.50 X 4 MCCREARY PNEUMATIC TIRE - Used on Scott Model 3450 tailwheel and Scott Model 3245-1 10 wheel assembly. Tire .............................. P/N 06-08100 .............. $54.00 Tube ............................ P/N 06-08102 ............... $22.50
400 X 4 AERO CLASSIC - used on Grove Model 49-1A; Tire: 11.5 Dia.
Looks like scaled down 500x5 tire. Tire .............................. P/N 06-00844 .............. $54.00 Tube ............................ P/N 06-08102 ............... $22.50
400X6 AERO CLASSIC - The New Light Sport Tire, 400-6 6 Ply with a Deep Aircraft Type Tread. Tire .............................. P/N 06-00944 ............... $55.50 Tube ............................ P/N 06-00945 ............... $14.95
280
LANDING GEAR
Trick Air has developed simple and reliable light aircraft skis of fiberglass composite construction which are aerodynamic and easy to attach and detach from your plane. So easy, in fact, they attach or detach in less than half an hour! These skis are made in the USA using the latest environmentally friendly technique in fiberglass called closed molding. This is a new green process of manufacturing the product. The 3000, 2250 and 1500 series skis have been static tested to exceed the requirements of TSO-C28 and have been TSO approved. EASY TO INSTALL - First time installation of hardware on the plane takes approximately 8 hours. After this initial Installation, it only takes 15 MINUTES PER SKI to install or remove the skis from the airplane. Skis are available in a white, sandable gray, Cub yellow, and Torch red finish.
Beringer Wheels & Brakes produced a new, extremely lightweight tailwheel assembly for the Pipistrel Sinus, with applications for other aircraft. The two-piece anodized aluminum wheel with sealed ball bearings and its 6-ply 200x50 tire and tube, assembled, weighs just 830 grams (29 ounces). It rides on the 8mm diameter Sinus axle; no aircraft modifications are required. The wheel and tire have a design load of 150kg (330 lb), which makes this assembly ideal for the Sinus. The tire is delivered already mounted and pressure-tested. It is ready for immediate delivery for use as a retrofit improvement, or for new installations. P/N 06-01583...............$278.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Wheel cover made of aluminum red anodized, fully CNC machined and laser engraved. Protect external bearing and axle nut. Fixed on rim with O-ring.
SKIS
Series 3000 series 3000-A series 2250 series 2250-A series 1500 series 1500-A series Suspension Strut Suspension Spring Gear Suspension Strut Suspension Spring Gear Suspension Strut Suspension Spring Gear Suspension Part No. 05-04373 05-04374 05-04375 05-04376 05-04377 05-04378 Price $7,755.00 $8,465.00 $5,795.00 $6,095.00 $5,195.00 $5,195.00
For Beringer 5 wheel ...............................P/N 06-00956 ...........$69.90 For Beringer 6 wheel ...............................P/N 06-01121 ...........$78.00
APPROVALS
The 3000 Series are STC approved for the following: Oleo Strut Maule Models Bee Dee M-4, M-4, M-4C, M-4S, M-4T, M-4210, M-4-210C, M-4-210S, M-4-210T, M-4-220, M-4-220C, M-4-220S, M-4-220T, M-5-210C, M-5-220C, M-5-235C, M-5-210TC, M-6-235, M-7235, MX-7-235, M-4-180V, M-5-180C, M-5-200, M-5-210C, M-6-180, M7-235A, M-7-235B, MX-7-160, MX-7-180, MX-7-180A, MX-7-180B Maule Spring Gear Models: MX-7-180AC, MX-7-180C, MX-7-160C, M-7-235C, M-8-235
Stainless steel clips between wheel rim and disc. Includes: 10 left and 10 right (set for 1 wheel), procedure. Set of 20. P/N 06-01111 ...........$39.00
These O-rings need to be replaced at each tire changing. Includes: 2 large O-rings and 1 small O-ring. For Beringer 5 wheel ....... P/N 06-01112 ..........$15.75 For Beringer 6 wheel ....... P/N 06-01113 ..........$15.75
Specific tire change tool for Beringer wheels with conical aluminum spacer to insert tire on wheel half. Plywood flanges maintain tire while positioning second wheel half with the O-ring. Includes: Plywood flanges, bolts with butterfly nut and conical aluminum spacer Tire change tool for BERINGER 5 wheels ..... P/N 06-01109 ...$158.00 Tire change tool for BERINGER 6 wheels ..... P/N 06-01110 ...$189.00 Full Lotus Manufacturing develops and manufactures inflatable floats for fixed wing aircraft and helicopters. They have extensive knowledge in fabric structural engineering and manufacturing, lightweight air retention membrane technology, and rotational molding. PLEASE VISIT WWW.AIRCRAFTSPRUCE.COM FOR A COMPLETE LISTING OF LOTUS FLOATS AND PRICING
The skid is 1 wide and 6 long. It is made out of 3/16 thick 347 Stainless Steel. It will accept up to a 1-3/4 O.D. 3/8 thread tie down ring. This skid will eliminate bending of the tie down ring and damage to the tail. This a must have for training aircraft. The skid is currently mounted on several experimental and certified aircraft. P/N 05-04383 ................... $68.75
These were designed especially for RV4s and Rockets but can be used on any aircraft with rudder cables that are installed down the side skins. The pedals are 6 tall and 3-1/2 wide, 1/2 diameter 6061 anodized aluminum bar. The kit includes; pedals, floor mounting brackets, cable clamps and chains. Pedals will fold out of hte way when not in use. P/N 05-04372 .............................. $141.95
281
CARBURETORS
REPLACEMENT CARBURETORS FROM KELLY AEROSPACE POWER SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Overhauling Lycoming and Continental carburetors & Providing FAA approved replacement parts for 20 years! Look to Kelly Aerospace Power Systems for Quality Fuel System Overhauled Units Aircraft Spruce & Specialty, as a factory distributor, offers a carburetor exchange program covering all popular Marvel Schebler/Facet general aviation carburetors. These carburetors are overhauled to the strictest industry standards and carry a full 6 month warranty (from date of installation). Most carburetors are available from stock or within a week and are furnished complete with gaskets. Due to the various configurations of carburetor installations, we suggest you retain your carburetor core until receiving the exchange unit. This will enable you to transfer all external fittings and installation hardware to the new exchange unit. All cores being returned for credit shall be, as removed from the engine, complete and not disassembled. A reduction in core credit is charged for missing or damaged parts. Precision Carburetors Precision Fuel Servos TCM Fuel Systems Romec Fuel Pumps Customer will need to Flow Dividers FAA/PMA Approved Replacement Parts provide core for overhaul in Fast Turn Time on Overhauls Carburetor Overhaul Quick Kits the event that our supplier Unmatched Quality Highly skilled/trained technicians does not have cores 100% calibration of fuel pumps and servos. available to overhaul
LYCOMING CARBURETORS
Price $696.00 $683.00 $763.00 $811.00 $794.00 $758.00 $683.00 $758.00 $758.00 $702.00 $758.00 $683.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $914.00 $758.00 $758.00 $758.00 $811.00 $683.00 $683.00 $758.00 $811.00 Core $600.00 $800.00 $800.00 $1,000.00 $1,000.00 $1,000.00 $600.00 $1,000.00 $1,000.00 $600.00 $1,000.00 $600.00 $1,000.00 $1,000.00 $1,000.00 $1,000.00 $1,000.00 $1,000.00 $800.00 $1,000.00 $1,000.00 $800.00 $1,000.00 $800.00 $800.00 $600.00 $600.00 $800.00 $800.00 Carb. Model MA-4SPA MA-4SPA MA-3A MA-6AA MA-3PA MA-4-5 MA-4-5 MA-3PA MA-4-5 MA-4SPA HA-6 MA-3PA MA-3PA HA-6 HA-6 MA-4-5 HA-6 HA-6 HA-6 HA-6 HA-6 HA-6 HA-6 HA-6 MA-4-5 MA-4SPA MA-4SPA MA-3A MA-4SPA HA-6 HA-6 HA-6
Carb. Model MA-3A MA-4SPA MA-4SPA MA-4-5 MA-4-5 MA-4-5 MA-3A MA-4-5 MA-4-5 MA-3SPA MA-4-5 MA-3SPA MA-4-5 MA-4-5 MA-4-5AA MA-4-5AA MA-4-5AA MA-4-5 MA-6AA MA-4-5 MA-4-5 MA-6AA MA-4-5AA MA-5 HA-6 MA-3PA MA-3PA HA-6 HA-6
Lycoming P/N 61547 69250 72394 71098 71710 66458 61383 66869 67713 62830 69540 68856 71546 71685 71139 71684 71684 71654 72407 72386 74121 73899 73257 20671 LW-15957 LW-16073 LW-16066 LW-15958
Vendor P/N A10-3103-1 A10-3678-12 A10-3678-32 A10-3878 A10-4164-1 10-2827 10-2983 10-3323 10-3391-1 10-3565-1 10-3634 10-3729 10-3856-1 10-3856-12 10-4025 10-4025-11 10-4025-12 10-4057-1 10-4218-1 10-4329 10-4404-1 10-4438-1 10-4495 10-4865 10-5219 10-5220 10-5220-E 10-5221 10-5224
Our P/N 10-03103-1 09-00984 07-00871 10-03878 07-00872 07-01405 07-01408 07-01411 07-01412 07-01413 07-01415 07-01416 07-01417 07-01418 07-01419 07-01420 07-01421 07-01422 07-01424 07-01426 07-01427 07-01428 07-01429 07-01430 07-01462 07-01463 07-01464 07-01465 07-01466
Lycoming P/N 77279 LW-16559 77585 77888 77939 LW-10064 LW-10196 LW-10619 LW-10540 LW-11222 LW-12097 LW-13133 LW-14016 LW-14689 LW-13757 LW-15380 LW-15504 LW-15981 LW-15626 LW-16062 LW-16413 LW-15663 LW-15674 LW-15985 72740 78728 13659 15496 15986 LW-16206 LW-15959 LW-15960
Vendor P/N 10-4910 10-4910-1 10-4953 10-4975 10-4978-1 10-5034 10-5042 10-5050 10-5054 10-5062 10-5092 10-5126 10-5142 10-5180 10-5189 10-5193 10-5200 10-5200-1 10-5206 10-5206-1 10-5206-11 10-5210 10-5211 10-5211-1 A10-4404 A10-5009 A10-5135 A10-5199 A10-5217 10-5227 10-5230 10-5235
Our P/N 07-01431 07-01432 07-01433 07-01434 07-01435 07-01437 07-01438 07-01440 07-01441 07-01442 07-01443 07-01444 07-01445 07-01446 07-01447 07-01448 07-01450 07-01451 07-01453 07-01457 07-01458 07-01459 07-01460 07-01461 08-01543 07-00873 10-05135 07-00234 10-05217 07-01467 07-01468 07-01469
Price $758.00 $758.00 $758.00 $758.00 $758.00 $811.00 $758.00 $683.00 $811.00 $763.00 $758.00 $683.00 $683.00 $758.00 $758.00 $811.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $758.00 $914.00 $763.00 $763.00 $696.00 $763.00 $811.00 $811.00 $908.00
Core $800.00 $800.00 $600.00 $800.00 $600.00 $1,000.00 $1,000.00 $600.00 $1,000.00 $800.00 $800.00 $600.00 $600.00 $800.00 $800.00 $1,000.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $1,000.00 $800.00 $800.00 $600.00 $800.00 $800.00 $800.00 $800.00
***NOTE***
Customer will need to provide core for overhaul in the event our supplier does not have cores available to overhaul. If you do not see your model # here please contact Aircraft Spruce Sales Department for pricing and availability . *All prices shown are with factory acceptable exchange carburetor. Send exchange carburetor core to Aircraft Spruce. Upon factory approval of core, you will be refunded the core charge.
CONTINENTAL CARBURETORS
Part No. A10-3168 A10-3237 A10-3649-1 A10-3859-1 A10-3965-1 A10-3965-11 A10-3965-12 A10-4115-1 A10-4171 A10-4191 A10-4233 A10-4240 A10-4439 A10-4457 A10-4893-1 A10-4894 A10-5067 A10-5082 A10-5128 A10-5192 A10-5284 Carb. Model MA-4-5 MA-3SPA MA-4-5 MA-4-5 MA-4-5 MA-4-5 MA-4-5 MA-3SPA MA-4-5 MA-4-5 MA-3SPA MA-3SPA MA-3SPA MA-3SPA MA-4-5 MA-3SPA MA-3SPA MA-3SPA MA-3SPA MA-3SPA MA-4-5 O.E.M. P/N 520120 530490 535207 538872 539883 539883 539883 627143 626789 626859 627365 627637 628945 629175 641139 633028 637035 640416 641860 646232 Our Part No. 07-01369 10-03237 07-01370 07-01372 07-01373 07-01374 10-03965-12 10-04115-1 07-01351 07-01375 07-01376 07-01377 10-04439 07-01378 07-00231 07-00842 07-01381 07-01382 07-01385 07-01386 07-01390 Our Price $758.00 $698.00 $758.00 $811.00 $758.00 $758.00 $811.00 $683.00 $758.00 $758.00 $683.00 $684.00 $683.00 $683.00 $759.00 $699.00 $683.00 $914.00 $683.00 $758.00 $755.00 Core $1,000.00 $800.00 $600.00 $1,000.00 $1,000.00 $1,000.00 $1,000.00 $800.00 $1,000.00 $1,000.00 $600.00 $600.00 $600.00 $600.00 $1,000.00 $800.00 $600.00 $600.00 $600.00 $1,000.00 $1,000.00
*All prices shown are with factory acceptable exchange carburetor. Add core charge on all models to each price shown. Send exchange carburetor core to Aircraft Spruce. Upon factory approval of core, you will be refunded the core charge. BE CERTAIN ALL FUEL IS REMOVED FROM THE CORE. FRANKLIN ENGINE CARBURETORS ALSO AVAILABLE. ADVISE EXACT ENGINE AND CARBURETORS ALSO AVAILABLE. ADVISE ENGINE AND CARBURETOR MODEL NUMBERS AND REQUEST QUOTATION
282
MARVEL-SCHEBLER CARBURETORS
MARVEL-SCHEBLER NEW CARBURETORS
Note: Customer will need to provide core for overhaul in the event our supplier does not have cores available to overhaul. Note: All Rebuilt & Overhauled Carb Purchases will be Charged an Additional $600.00 for Core. Carb. Model No. MA-4SPA MA-4-5 MA-4-5 MA-3SPA MA-4-5 MA-4-5 MA-3SPA MA-4SPA MA-4SPA MA-3PA MA-3SPA MA-3PA MA-3A HA-6 HA-6 HA-6 HA-6 MA-3PA MA-4-5 HA-6 HA-6 MA-4-5 MA-4-5 Model Number MA-4SPA MA-4SPA MA-4-5 MA-4-5 MA-4-5 MA-3PA MA-4-5 MA-4-5 MA-4-5 MA-3SPA MA-3SPA MA-4SPA MA-4SPA MA-3A MA-4SPA MA-4-5 MA-3PA MA-4-5 MA-3PA MA-3PA MA-4-5 MA-3A MA-4SPA HA-6 MA-3PA HA-6 HA-6 HA-6 HA-6 HA-6 MA-3PA MA-3PA HA-6 MA-4-5 MA-4-5 HA-6 HA-6 HA-6 MA-4-5 MA-4-5 OEM Part No. Our Part No. 10-3678-12--F 10-3859-1--F 10-4164-1--F 10-4240-1--F 10-4404--F 10-4893-1--F 10-4895-1--F 10-4910--F 10-5009--F 10-5050--F 10-5082--F 10-5142--F 10-5199--F 10-5219--F 10-5224--F 10-5235--F 10-5255--F 10-5267--F 10-5284--F 10-6001--F 10-6030-1--F 10-6045--F 10-6054--F OEM Part No. 10-3678-12 10-3678-32 10-3859-1 10-3878 10-4164-1 10-4233 10-4404-1 10-4404 10-4893-1 10-4894-1 10-4895-1 10-4910-1 10-4910 10-4953 10-5009 10-5034 10-5050 10-5054 10-5126 10-5142 10-5193 10-5199 10-5217 10-5219 10-5220 10-5224 10-5230 10-5235 10-5253 10-5255 10-5257 10-5267 10-5283 10-5284 10-5288 10-6001 10-6019 10-6030-1 10-6035-11 10-6054 08-06304 08-06327 08-06307 08-06329 08-06330 08-06309 08-06312 08-06333 08-06315 08-06336 08-06338 08-06340 08-06316 08-06342 08-06344 08-06346 08-06348 08-06353 08-06356 08-06358 08-06363 08-06366 08-06369 Rebuilt P/N 08-06325-1 08-06326-1 08-06371-1 08-06372-1 08-06373-1 08-06374-1 08-06376-1 08-06375-1 08-06378-1 08-06379-1 08-06380-1 08-06382-1 08-06381-1 08-06383-1 08-06384-1 08-06385-1 08-06386-1 08-06387-1 08-06388-1 08-06389-1 08-06390-1 08-06391-1 08-06392-1 08-06394-1 08-06395-1 08-06396-1 08-06397-1 08-06398-1 08-06399-1 08-06400-1 08-06401-1 08-06402-1 08-06403-1 08-06404-1 08-06405-1 08-06406-1 08-06407-1 08-06408-1 08-06409-1 08-06410-1 Our Price $1,648.00 $2,116.00 $2,116.00 $1,697.00 $2,116.00 $2,116.00 $1,644.00 $1,649.00 $1,649.00 $1,648.00 $1,649.00 $1,648.00 $1,473.00 $2,296.00 $2,293.00 $2,293.00 $2,293.00 $1,649.00 $2,116.00 $2,293.00 $2,293.00 $2,116.00 $2,117.00 Rebuilt Price $869.00 $869.00 $1,033.00 $1,033.00 $1,033.00 $869.00 $1,034.00 $1,034.00 $1,033.00 $869.00 $869.00 $869.00 $869.00 $759.00 $879.00 $1,033.00 $870.00 $1,033.00 $870.00 $870.00 $1,034.00 $759.00 $889.00 $1,033.00 $869.00 $1,032.00 $1,033.00 $1,033.00 $1,034.00 $1,034.00 $870.00 $869.00 $1,034.00 $1,058.00 $1,033.00 $1,033.00 $1,034.00 $1,034.00 $1,034.00 $1,034.00 Tempest Carb. Model No. OEM Part No. MA-4SPA MA-4-5 MA-3PA MA-4-5 MA-5 MA-3SPA MA-4SPA MA-3A MA-4-5 MA-4-5 MA-3PA MA-4-5 MA-4SPA MA-3PA HA-6 HA-6 MA-3PA HA-6 MA-4-5 HA-6 MA-4-5 MA-4-5 MA-4-5 Overhaul P/N 08-06325 08-06326 08-06371 08-06372 08-06373 08-06374 08-06376 08-06375 08-06378 08-06379 08-06380 08-06382 08-06381 08-06383 08-06384 08-06385 08-06386 08-06387 08-06388 08-06389 08-06390 08-06391 08-06392 08-06394 08-06395 08-06396 08-06397 08-06398 08-06399 08-06400 08-06401 08-06402 08-06403 08-06404 08-06405 08-06406 08-06407 08-06408 08-06409 08-06410 10-3678-32--F 10-3878--F 10-4233--F 10-4404-1--F 10-4865--F 10-4894-1--F 10-4910-1--F 10-4953--F 10-5034--F 10-5054--F 10-5126--F 10-5193--F 10-5217--F 10-5220--F 10-5230--F 10-5253--F 10-5257--F 10-5283--F 10-5288--F 10-6019--F 10-6035-11--F 10-6050--F 10-6102--F Overhaul Price $749.00 $759.00 $753.00 $753.00 $753.00 $743.00 $753.00 $753.00 $778.00 $769.00 $769.00 $742.00 $742.00 $705.00 $769.00 $754.00 $742.00 $753.00 $742.00 $743.00 $753.00 $705.00 $769.00 $940.00 $742.00 $907.00 $907.00 $907.00 $907.00 $907.00 $742.00 $742.00 $907.00 $778.00 $752.00 $907.00 $918.00 $907.00 $753.00 $753.00 Our Part No. 08-06305 08-06306 08-06328 08-06308 08-06331 08-06311 08-06332 08-06334 08-06335 08-06337 08-06339 08-06341 08-06317 08-06343 08-06345 08-06347 08-06349 08-06354 08-06357 08-06359 08-06365 08-06368 08-06370 Our Price $1,649.00 $2,116.00 $1,649.00 $2,117.00 $2,598.00 $1,649.00 $1,649.00 $1,650.00 $2,116.00 $2,117.00 $1,648.00 $2,116.00 $2,154.00 $1,649.00 $2,293.00 $2,293.00 $1,648.00 $2,293.00 $2,116.00 $2,293.00 $2,598.00 $2,116.00 $2,116.00 Please check with Aircraft Spruce on availability of cores at Marvel-Schebler.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A new float has been developed for the small MA series carburetors. The new floats are a solid blue epoxy material with a smooth skin. P/N 08-06508 .....................$113.95
Tempest MSA throttle minor repair kit (778-1007--F). All parts contained in this kit are covered under FAA/ PMA PQ0111NM and/or PQ1296CE. P/N 08-06539 .....................$132.95
283
CARBURETOR PARTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
46-462 46-486
These one piece Venturis replace old type primary and main Venturis in Marvel-Schebler carburators. Order by new Venturi part number. Old Main New 1-Piece Our Old Main New 1-Piece Our Venturi Venturi Price Venturi Venturi Price
Bendix/Precision (RSA-5, RSA-7da1, RSA-10 Overhaul/Exchange). Bendix/Precision (Flow Dividers Overhaul/Exchange. TMC Complete Fuel Injection Systems (IO-360, IO-550, L/TSIO360,TSIO-520, GTSIO-520, TSI Overhaul Exchange). TCM Individual Fuel Injection Components Throttle Assemblies, Control Assemblies (without throttle Pumps, Manifold Valves, Pressure Regulators, No Assemblies (cleaning, rejetting, calibrating). FAA/PMA Replacement Parts. Call or visit our website at: www.aircraftspruce.com for more info.
This Float Needle Seat Driver is applicable to Marvel-Schebler MA3 and MA4 carburetors and is quality made of alloy steel. It facilitates the easy removal of needle valve seats, prevents damage to the main casting and the new seat during installation, and insures proper torque application. Features 7/16 hex drive fitting. P/N 12-30190 ................ $72.50
46-F7 46-F8
$107.95 $76.95
46-A2 46-A70
46-F10 46-F12
$77.75 $84.75
Unique Elastomer Bearing Replaces Needle Bearing McFarlanes elastomer bearing is assembled with tension between the mating surfaces. This tension prevents micro-movement and its related metal erosion. The bearing contact area that transfers vibration motion from the heat box to the butterfly shaft is hundreds of times greater than that of the original needle bearing. This large surface effectively prevents localized metal erosion. Absorbs shaft and butterfly vibration Eliminates needle bearing failures Increases service life of all components Direct replacement for original parts. Proven Design: Tested to over 700,000 cycles while exposed to avgas, heat and vibration without any change in performance Extremely rugged and wear resistant in high temperature and fuel environments. Convenient: Discontinued part numbers through the factory are now manufactured by McFarlane Also available in kits containing the shaft, arm, bearing housings, monel rivets, and roll pin
CESSNA SHAFT Description Cessna Shaft MC0450068-2 Model: FA152 Serial No: FA1520337 thru FA1520425 Cessna Shaft MC0550180-16 Model: 172B,C Serial No: 17247747 thru 17249544 Cessna Shaft MC0550180-28 Model: F172D,E,F, G Serial No: F172-0001 thru F172-0319 Cessna Shaft MC0509068-6 Model: 172Q Serial No: 17275869 thru 17276516 Cessna Shaft MC1752078-4 Model: 177A,B Serial No: 17701165 thru 17702752 Cessna Shaft MC0750112 Model: 180* Serial No: 30000 thru 32150 Cessna Shaft MC0750126-19 Model: 180*, 180A,B Serial No: 32151 thru 50661 Cessna Shaft MC0750133-8 Model: 175, 175A Serial No: 55001 thru 56777 Cessna Shaft MC0750173-3 Model: 185, 185A,B, C,D,E/ A185E* Serial No: 185-0001 thru 185-1300 Cessna Shaft MC0750173-4 Model: A185E* Serial No: 185-1301 thru 18501832 Part No. Price 05-04430 $142.95 05-04431 $123.95 05-04432 $170.95 05-04433 $176.95 05-04434 $78.75 05-04435 $124.95 05-04436 $139.50 05-04437 $76.50 05-04438 $149.95 05-04439 $162.95
1984 FAA Service Bulletin A1-84 recommends replacing old Marvel-Schebler floats with the following float kits which feature metal floats to replace old plastic floats: Kit CF666-915 - For MA3, MA3-SPA, MA4-SPAP/N 07-00677 ...$107.95 Kit CF666-916 - For MA4-5, MA5, MA6 ...........P/N 07-00678 ...$118.85 Kit CF666-917 - For HA-6.................................P/N 07-00679 ...$118.95 Needle and Seats for MA3-4 #233-615 ............P/N 07-06617 .....$73.65 Needle and Seats for MA4-5 #233-614 ............P/N 07-06616 .....$87.75
NOTE: Many Marvel-Schebler replacement parts are no longer available from Facet. These are manufactured by Kelly Aerospace.
284
CARBURETORS
Kelly Aerospace Quick Kits are easy to use, and are designed to save you time and money. Quick Kits include not only the recommended replacement parts used in every overhaul, but the additional parts used by all fuel professionals to insure the job is done right. Kits include (where applicable): Throttle shaft lever, throttle shaft, throttle adjusting screw, throttle valve screws, inlet strainer screws, throttle body screws, mixture control lever screw, gasket kit, pump connection rod, throttle adjustment spring, throttle opening spring, idle adjustment spring, float lever shaft, pump stem, throttle shaft bushings, inlet strainer washer, pump stem retainer washer, mixture control lever washer, throttle body washers, throttle lever lock nut, float shaft cotter pin, throttle nut cotter pin, pump lever, pump plunger assembly and float valve seat assembly. KIT P/N CF286-00 CF286-01 CF286-02 CF286-03 CF286-04 CF286-05 CF286-06 CF286-07 CF286-08 CF286-09 CF286-10 CF286-11 CF286-12 PRICE $329.00 $479.95 $473.00 $467.00 $429.00 $538.50 $458.00 $486.00 $459.95 $469.00 $529.00 $504.00 $351.95 Lycoming Carburetors Lycoming Carburetors Continental Carburetors Franklin Carburetors P/N Quick Kit P/N P/N Quick Kit P/N P/N Quick Kit P/N P/N Quick Kit P/N 10-3856-1 CF286-06 10-5142 CF286-01 10-4457 CF286-02 10-2971-P CF286-02 10-3856-11 CF286-06 10-5180 CF286-10 10-4893 CF286-05 10-3007 CF286-06 10-3856-12 CF286-06 10-5189 CF286-10 10-4893-1 CF286-05 10-3063-2 CF286-06 10-3878 CF286-08 10-5193 CF286-08 10-4894 CF286-02 10-3148-1 CF286-06 10-4057 CF286-09 10-5199 CF286-00 10-4894-1 CF286-02 10-3479 CF286-06 10-4057-1 CF286-09 10-5206 CF286-10 10-4895 CF286-03 10-5069 CF286-02 10-4164 CF286-08 10-5206-1 CF286-10 10-4895-1 CF286-03 10-5093 CF286-00 10-4164-1 CF286-07 10-5206-11 CF286-10 10-5067 CF286-02 Continental Carburetors 10-4404 CF286-09 10-5210 CF286-10 10-5082 CF286-02 P/N Quick Kit P/N 10-4404-1 CF286-09 10-5217 CF286-04 10-5128 CF286-02 10-2848 CF286-02 10-4910 CF286-04 10-5219 CF286-11 10-5192 CF286-05 10-2948 CF286-02 10-4910-1 CF286-04 10-5220-E CF286-01 10-5284 CF286-05 10-3168 CF286-05 10-4953 CF286-00 10-5220 CF286-01 Lycoming Carburetors 10-3237 CF286-03 CF286-01 10-5221 CF286-12 P/N Quick Kit P/N 10-4978-1 10-3649-1 CF286-05 10-5009 CF286-04 10-5224 CF286-11 10-2827 CF286-07 10-3759 CF286-05 10-5009N CF286-04 10-5227 CF286-12 10-2983 CF286-00 10-3859 CF286-05 10-5034 CF286-07 10-5230 CF286-11 10-3103-1 CF286-00 10-3859-1 CF286-05 10-5042 CF286-00 10-5235 CF286-11 10-3323 CF286-07 10-3965 CF286-05 10-5045 CF286-10 10-5253 CF286-11 10-3346-1 CF286-02 10-3965-1 CF286-05 10-5045-1 CF286-10 10-5255 CF286-11 10-3391-1 CF286-06 10-4171 CF286-05 10-5050 CF286-01 10-5257 CF286-01 10-3565-1 CF286-02 10-4191 CF286-05 10-5054 CF286-09 10-5267 CF286-01 10-3634 CF286-06 10-4233 CF286-02 10-5062 CF286-04 10-5282 CF286-11 10-3678-12 CF286-04 10-4240 CF286-02 10-5092 CF286-10 10-5283 CF286-11 10-3678-32 CF286-04 10-4240-1 CF286-02 10-5126 CF286-01 10-5288 CF286-08 10-3729 CF286-02 10-4252 CF286-02 10-5135 CF286-04 10-6014 CF286-11 10-3856 CF286-06 10-4439 CF286-03
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
See which Part No. is for your application in the charts to the right.
ELLISON CARBURETORS
Ellison variable venturi throttle body injectors provide reliable fuel metering for a variety of homebuilt engine applications. Features include uniform fuel distribution, inverted flight operation, few moving parts, instantaneous response, easy starting, light weight, and low maintenance. When ordering, specify: Engine make, engine model/HP and displacement and RPM. MODEL EFS-3A Part Number Airflow Capacity* Fuel Regulation Application Fuel Pressure Requirements** Controllable Mixture Fuel Fitting 07-00959 SV Diaphragm Controlled >80 HP 1/2 - 3 PSI Yes 3/8 Flared Tube $1,025.00
The NA-S3A1 carburetor is no longer in production. Only the parts listed are carried in stock. Others may be special ordered. Originally used on Cont. A-65, A-75, A-80, C-75, C-85 and C-90 engines. Gasket & Ring Set (Incl. gaskets for under seat) P/N 07-02200 ........$71.75 P-14222 Steel Needle and P-17247 seat ......P/N 07-14222 ......$157.95 Needle (Delrin) ...............................................P/N 2523047 .......$125.95 Metering Jet (C-85) ........................................P/N 07-00684 ........$13.50 Metering Jet (A-65).........................................P/N 07-00685 ........$12.50 Throttle Shaft (Ref. #34 in Manual) not available.
Schebler Fuel Inlet Screen Gaskets for many Carbureted Aircraft The copper gaskets should be changed when finger screens are inspected at each annual inspection. P/N 07-01387 ...........................$3.75 Eligible Engine Model Series Marvel-Schebler / Facet Carburetor Models Eligible Continental Model Lycoming for Installation Series Model Series MA-3, MA-3PA, MA-3A, MA- A-65, A-75, C-85, C-90, O-235, O-290, 3SPA, MA-4SPA O-200, C-125, C-145, O-300 O-320 MC16-A108 GASKET FUEL INLET FAA-PMA - MarvelSchebler Fuel Inlet Screen Gaskets for many Carbureted Aircraft The copper gaskets should be changed when finger screens are inspected at each annual inspection. P/N 07-01389 ...........................$2.95 Eligible Engine Model Series Marvel-Schebler / Facet Carburetor Models Eligible Continental Model Lycoming Model for Installation Series Series MA-4-5, MA-4-5AA, MA-5, O-340, O-360, GO-300, O-470 MA-6AA, HA-6 O-435, O-540 MC16-A48 GASKET FUEL INLET FAA-PMA - Marvel-Schebler Fuel Inlet Screen Gaskets for many Carbureted Aircraft The copper gaskets should be changed when finger screens are inspected at each annual inspection. Sold as a 5 pack. P/N 07-01388 .........................$11.85 Eligible Engine Model Series Marvel-Schebler / Facet Carburetor Models Eligible for Continental Lycoming Model Installation Model Series Series MA-4-5, MA-5AA, MA-4-5AA, O-340, O-360, GO-300, O-470 MA-5, MA-6, MA-6AA, HA-6 O-435, O-540
285
BING CARBURETORS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
#17 #29 #25 #21 #17 #29 #25 #21 To Order, Specify: 1. Model indicated by engine number 277, 377, 447, 503, or 532. 2. With intake silencer or Without intake silencer. 3. Single Carb or Dual Carb. 4. Hand Choke or Remote Choke. Model # 54/36/2040 P/N 07-00303 ........................$327.95 Top O Ring #7 Air Screw O Ring Bowl Gasket #26 Float Needle Hinge Pin #10 Sieve Sleeve (Screen) Cable Grommet P/N 07-00304 .................................$34.75
19
20
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 30 39 40 41 42 46 47 48 49 50 51 52 53 54 55 56
Part No. 268-978-998 251-554 963-691-699 963-711-719 963-140-147 963-155 831-710 963-679 963-700 261-625 963-500 827-347 963-160 938-640 938-655 963-720 831-450 241-430 241-440 942-541 260-370 861-181 929-700 261-705 261-710 261-010 830-720 963-180 963-740 268-850 661-050 963-750 268-847 239-730 261-770 260-490 261-755 240-791 945-750 261-200 256-035 861-190 831-715
#12 New Spring Cup #56 Jet Needle O Ring #11 Clip
47
46 54
6 13 14
Description Main Jet Atomizer Needle Jet Jet Needle Idler Jet Air Screw O Ring Piston Mixing Tube Sieve Sleeve Clip New Style Spring Cup Mix Screw Spring Slide Spring Cover Plate O Ring Screw Adjuster Nut Grommet Indep. Float Pivot Pin Float Needle Clip Bowl Kit (bowl,24-27,55)
*Float Needle Valve not included
Price $8.50 $19.75 $14.25 $12.65 $26.25 $9.75 $2.70 $83.75 $17.50 $7.90 $6.75 $6.50 $7.25 $2.80 $5.25 $21.65 $6.25 $1.47 $3.85 $1.03 $2.85 $29.75 $1.85 $29.75 $1.53 $86.75
53 50 52 51 55 29 30 5 25 2 26 27 1 3 9 10 28 24
This float and bowl kit replaces a single float system. Includes clip float needle, float pin, float bracket, float chamber, and the float. P/N 261-010 ................ $86.75
Gasket $8.25 Bowl Clip $7.95 Piston $7.95 Sleeve $3.60 Spring $1.70 Housing $12.75 Piston $19.75 Spring $3.65 Housing $9.75 Rubber Cap $4.95 Choke Lever $22.75 Screw(51) & $2.40 Washer(52) Nut $1.11 Vent Tube $2.85 Float Arm $14.25 Jet Needle O Ring $1.39
Bing Remote Choke Kit (w/8 cable) .... P/N 07-00308 ....$72.50 Bing Remote Choke Kit (w/o cable) ..... P/N 07-00309 ....$54.75 Bing Aircraft Parts manual ................... P/N 07-00310 ....$13.25 Bing Plastic Crossover Vent Tube - 280mm long. Used on Bing type 84 carbs. ....................................... P/N 07-01360 ....$10.50
CARBURETOR SYNCHRONIZATION
CARBMATE - Quick & easy synchronizing by direct comparison of a set of carbs / Fuel Injector throttle bodies. Range adjstable from 2 to 0,05cmHg per LED. Hook up 2 or 5 cylinder with the optional adapter kit. PN 07-01265 ..............$109.95 SYNCHROMATE - Precise synchronizing by direct
comparison of a set of carbs / Fuel Injection throttle bodies.Fixed resolution of 0, 5cmHg. Includes absolute vacuum & wireless RPM measurement. Hook up 3 or 4 cylinders with the optional adapter kit. Synchromate ............................ PN 07-01266 ...............$221.95 W/ Rotax Accessory Kit............ P/N 07-01892 ..............$254.95
53
16
52 51
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 30 39 40 41 42 46 47 48 49 50 51 52 53 54
Part No. 268-980 261-692 261-606 261-643 963-140 963-155 831-710 261-635 963-130 261-625 261-650 227-635 963-160 938-640 239-700 261-660 261-670 241-430 241-440 942-541 260-370 963-192 929-700 261-705 261-710 963-170 830-720 963-180 963-740 268-850 661-050 963-750 268-847 239-730 261-770 260-490 261-750 240-791 945-750 261-200 256-033
Description Price Main Jet 135 --Atomizer $20.75 Needle Jet 262 $12.25 Jet Needle 8H1 $13.50 Idler Jet 50 $26.25 Air Screw $9.75 O Ring $2.70 Piston $68.50 Jet Stock $17.50 Screen $7.90 Holding Plate $7.50 Spring Cup $6.95 Mix Screw $7.25 Spring $2.80 Slide Spring $6.00 Cover $19.25 O Ring $7.50 Screw $1.47 Adjust. Screw $3.85 Nut $1.03 Grommet $2.85 Float $47.75 Pin $1.85 Float Needle $29.75 Clip $1.53 Bowl $33.75 Gasket $8.25 Bowl Clip $7.95 Piston $7.95 Sleeve $3.60 Spring $1.70 Housing $12.75 Piston $19.75 Spring $3.65 Housing $9.75 Rubber Cap $4.95 Lever $17.00 Screw(51) & $2.40 Washer(52) Nut $1.11 Vent Tube $2.85
286
21
CARBURETOR PARTS
CARBURETOR JETTING CHART FOR ROTAX UL ENGINES
Use this chart to identify part number you need, then use bottom chart to select correct part number to order.
CM WP
1 = Without Rotax intake silencer kit, with K&N RC1200 air filter, with or without Rotax after muffler kit.
ROTAX ENGINE 2771 2772 3771 3772 4471 4472 447DC1 447DC3 503SC1 Up to #3785371 503SC2 Up to #3785371 503SC1 From #3785372 Up 503SC2 From #3785372 Up 503DC1 503DC3 532SC1 532SC3 532DC1 532DC3 5821 5823
$8.25 MAIN JET 148 140 165 155 165 155 135 128 180 158 185 165 158 148 195 170 165 145 165 145
$12.25 NEEDLE JET 2.72 2.72 2.70 2.70 2.70 2.70 2.70 2.68 2.74 2.74 2.72 2.70 2.74 2.68 2.74 2.74 2.72 2.68 2.72 2.68
$11.50 JET NEEDLE 8L2 8L2 8O2 8O2 15K2 15K2 6G1 15K2 8G2 6H2 15K2 15K2 8L2 11K2 15K2 15K2 11G2 15K2 11G2 15K2
ME HA
2 = With Rotax intake silencer kit, with K&N CM0300 air filter, with or without Rotax after muffler kit.
AP LG EP CS IN EL AV TO PS
3 = With Rotax dual intake silencer kit, with K&N RC1200 air filters, with or without Rotax after muffler kit.
MAIN JET
125 128 130 135 138 140 145 148 150 155 158 160 162 165 170 175 180 185 190 195 200 205 220 = = = = = = = = = = = = = = = = = = = = = = = Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. No. R268-978 R261-085 R268-979 R268-980 R268-998 R268-981 R268-982 R268-995 R268-983 R268-984 R268-996 R268-985 R268-990 R268-986 R268-987 R268-988 R268-989 R261-080 R261-084 R268-992 R261-082 R261-087 R261-081 30 35 40 45 50 55 60 65
IDLER JET
= = = = = = = = Part Part Part Part Part Part Part Part No. No. No. No. No. No. No. No. R963-141 R963-143 R963-142 R963-144 R963-140 R963-147 R963-145 R963-146
An EAA member called his brother-in-law to ask if he knew of a way to hold the spring and plastic cup while changing the jet needle clip setting on a Rotax engine. Finding no solution, he decided to invent one; the handy Kwik Tune, a timesaving tool he launched at Sun n Fun. Kwik Tune helps remove and reinstall the aircraft throttle cable, cover, spring, and slide in a Bing carburetor. P/N 08-05206 ..........................$9.95
NEEDLE JET
2.62 2.68 2.70 2.72 2.74 2.76 2.78 2.80 2.82 2.94 = = = = = = = = = = Part Part Part Part Part Part Part Part Part Part No. No. No. No. No. No. No. No. No. No. R261-606 R963-691 R963-698 R963-697 R963-699 R963-693 R963-696 R963-695 R963-694 R961-022
The Silver Hawk EX, non-certified Fuel Injection System is proven technology drawn from decades of fuel metering engineering by Precision Airmotive. Manufactured as experimental, the new Silver Hawk kit provides experimental pilots with precise, dependable, and reliable fuel metering. Just what youd excpect from Precision Airmotive. At a price that will make you soar. Manufactured using the highest quality materials and components, the Silver Hawk EX features a machined finish with clear coat anodize. Designed for these major engine manufacturer applications: Lycoming 320, 360, & 540 series; Continental 470 series; Superior and others. Specifically engineered and built to meet the demands of aviations growing experimental segment. Precision Airmotive appointed worldwide network of factory authorized product support centers Backed by a Precision warranty program.
2H2 = Part No. R963-717 4E2 = Part No. R963-716 6G1 = Part No. R261-642 6H2 = Part No. R963-719 8G2 = Part No. R963-712 8H1 = Part No. R261-643 8L2 = Part No. R963-714 8O2 = Part No. R963-711 1O = Part No. R961-045 11G2 = Part No. R961-043 11K2 = Part No. R961-044 15K2 = Part No. R963-718
P/N 07-00693 ......................... $6.75 Lower numbers indicate smaller jet size or opening. Low numbers = lean. High numbers = rich. First needle number denotes mixture above half-throttle. Needle letter denotes mixture below half-throttle.
EX360-1
EX360-2
EX540-1
Description Application: Lycoming O-320 and IO-320 engines with 150/160 HP Application: Lycoming O-360 and IO-360 parallel valve engines with 160/180 HP Superior O-360 and IO-360 parallel valve engines with 180 HP Application: Lycoming O-360 and IO-360 angle valve engines with 200 HP Application: Lycoming O-540 and IO-540 parallel valve engines with 235-260 HP Continental O-470 engines
Price $2,527.00
07-00774
$2,589.00
BV
07-00775 $2,828.00
07-00776
$2,583.00
287
FUEL PUMPS
CM WP ME HA AP LG EP
Fuel Pump
The Buzz Pump AC2001 is lightweight positive displacement, high volume, manual dual stroke auxiliary fuel pump for experimental aircraft. The Buzz Pump has capacity to operate aircraft engines as large as 300 HP models at full power. Eliminates the connection to a complicated electrical system and expensive high-pressure electrical fuel pump. The Buzz Pump is constructed with high quality engineered materials and components. It will bolt directly into standard Christen and D2 pump bolt patterns. Specifications: Weight: 2.4 lbs. Aluminum billet housing construction Double O-ring shaft seals Triple precision bearing shaft support Metal valves for long life Pressure setting relief valve: 5-25psi 90 stroke angle for comfortable operation Housing dia.: 3.4 x 4.5 total length Pump handle length: 4.5 One input port and one output port @ 180 1/4-18 NPT tapped holes for fittings Standard finish is clear anodize (light gray color) Buzz Filter Sump AC2002, can bolt directly to the pump with an AN911-6D threaded nipple (not included) P/N 07-00654 ..........................$625.00 The Buzz Filter Sump, AC2002 is a fuel filter/moisture sump for high-pressure applications, 50psi ideally suited for precision fuel injection systems. The Buzz filter/sump can mount directly to the Buzz Pump AC2001 or to the fuselage or firewall. Easy to replace fuel filter. The Buzz Filter/Sump is engineered and constructed with high quality engineered materials and components and will mount directly to the Buzz Pump AC2001, with an AN911-6D threaded nipple. Specifications: High-pressure application to 50psi Weight: 13 oz. Aluminum billet housing construction Large O-ring sump seal 1/4-18 NPT tapped holes for fittings CG-12 Fram filter with easy to replace insertion chamfer Standard finish is clear anodize (light gray color) Curtis drain fitting *AN fittings not included. P/N 07-00655 ..........................$398.00 Genuine Mikuni fuel pumps. Replace original parts on Rotax, Hirth, & many other engines. Single Pump ...........................P/N 07-00777 ...........$21.75 Dual Pump ..............................P/N 07-00778 ...........$28.90
The Early Model Lycoming Fuel Pump The New Continental Pump OVERHAULED LYCOMING FUEL PUMPS All internal parts are replaced with new certified parts. The actuating arms are magnetic particle test inspected; cast parts are inspected for wear, corrosion and cracks. Bboth the older laminated and newer channel style fuel pumps are overhauled for normally aspirated, pressure carburetor, and fuel injected systems. Note: Customer will need to provide core for overhaul in the event our supplier does not have cores available to overhaul. MMO Description P/N Price Overhauled Lycoming & TCM Diaphragm Fuel Pumps 40174 Fuel Pump - Overhauled 05-02530 $242.95 40296 Fuel Pump - Overhauled 05-02531 $218.95 40595 Fuel Pump - Overhauled 05-19015 $238.95 41234 Fuel Pump - Overhauled 05-02532 $207.95 41270 Fuel Pump - Overhauled 05-02533 $207.95 41271 Fuel Pump - Overhauled 05-02534 $207.95 41272 Fuel Pump - Overhauled 05-02536 $237.95 41452 Fuel Pump - Overhauled 05-02537 $234.95 41617 Fuel Pump - Overhauled 05-02538 $211.95 41812 Fuel Pump - Overhauled 05-02539 $239.95 75246 Fuel Pump - Overhauled 05-02540 $218.95 75247 Fuel Pump - Overhauled 05-02541 $207.95 103396-01 Fuel Pump - Overhauled 05-02542 $566.00 103586-01 Fuel Pump - Overhauled 05-02543 $566.00 LW14282 Fuel Pump - Overhauled 05-02544 $233.95 LW15399 Fuel Pump - Overhauled 08-15399 $208.95 LW15472 Fuel Pump - Overhauled 05-19000 $209.95 LW15473 Fuel Pump - Overhauled 05-19010 $218.95 LW16335 Fuel Pump - Overhauled 05-02545 $234.95 LW16775 Fuel Pump - Overhauled 05-02546 $234.95 LW16947 Fuel Pump - Overhauled 05-02547 $239.00 RJ4033 Fuel Pump - Overhauled 05-02548 $504.00 R00253-1 Fuel Pump - Overhauled 05-02549 $560.00 R00253-2 Fuel Pump - Overhauled 05-02551 $560.00 R00253-501 Fuel Pump - Overhauled 05-02552 $555.00 R00253-502 Fuel Pump - Overhauled 05-02554 $554.00 AF1572 Fuel Pump - Overhauled 05-02555-1 $207.95 AF15473 Fuel Pump - Overhauled 05-02556-1 $209.95 New Lycoming Diaphragm Fuel Pumps AF15472 AF15473 4036/9076 6861 9051/9867 40585 40695 AF40585 AF40695 AF631391 Fuel Pump - New Fuel Pump - New 05-02555 05-02556 $250.95 $248.95 $322.95 $477.95 $498.95 $503.00 $487.95 $478.95 $325.95 $798.00 $84.65 $307.95 $777.00 $777.00 $798.00
CS IN EL AV TO PS BV
Single Pump ...........................P/N 07-01011 .............$7.95 Dual Pump ..............................P/N 07-01010 ...........$14.75
Rebuild Kits
Bing High-capacity pump. Use when tank is more than 5 away or significantly lower than engine. P/N 07-00779 ...$173.95 Diaphragm Repair kit. ...............P/N 07-01007 .....$34.85 Bing Low Vol. fuel pump...........P/N 07-01008 ...$106.95 Repair Kit for Low Vol pump.....P/N 07-01009 .....$27.95
The 8150 series high pressure electric fuel pump is a positive displacement cammed vane type used primarily in airborne applications. It features a low pressure relief valve and integral bypass valve. Applications include in-line fuel transfer priming of fuel-injected engines & emergency fuel pump. A permanent-magnet, explosion resistant motor is rated for continuous duty. These self-priming, lightweight (2.6 lbs. max.) pumps have been used for over 15 years by major aircraft manufacturers.
Flow Output Fluid Power Core Price Ea GPH 8150-B 35 Min. 4.5 PSI Av Gas 24V DC @ 2A $225.00 $776.00 Overhauled* * Customer overhauled only. O/H unit comes with 8130. New Fuel Pumps Not FAA approved. For Experimental Aircraft Only! Av Gas 14V DC @ 5A --$745.00 8163-A New 35 Min. 21 PSI MIL-G-5572 8170-A New 35 Min. 4.5 PSI Gasoline 12V DC @ 4A --$1,170.00 Model No.
Weldon 18000-A (14Volt) Replaces: Cessna C291504-0101, Dukes 4140-00-17 Weldon 18000-B (28Volt) Replaces: Cessna C291504-0201, Dukes 4140-00-15 18000-A Weldon Pump 14V ....... P/N 08-07082 ......$749.00 18000-A Weldon Pump 28V ....... P/N 08-07083 ......$823.00
This T-bolt quick release band clamp with mounting bracket fits all Weldon fuel pumps with 2-1/2 diameter motors. Made from certified aerospace quality stainless steel, this bracket offers secure holding power under extreme vibration. The band clamp rotates within the mounting foot to offer easy access to the quick release latch for a variety of mounting positions. P/N 05-00021 .............. $37.50 ea.
Overhauled TCM Centurion Fuel Pumps Fuel Pump - Overhauled 05-19030 Fuel Pump - Overhauled 05-19035 Fuel Pump - Overhauled 05-19025 Fuel Pump - Overhauled 05-02557 Fuel Pump - Overhauled 05-02558 Fuel Pump - Overhauled 05-02562 Fuel Pump - Overhauled 05-19045 Fuel Pump - Overhauled 05-19050 New TCM Centurion Fuel Pumps AF6561 Screen Kit 05-02560 AF16335 Fuel Pump - New 05-02561 AF40585 Fuel Pump - New 05-02564 AF40695 Fuel Pump - New 05-02565 AF631391 Fuel Pump - New 05-19050 $100.00 CORE CHARGE ON TEMPEST OVERHAULED FUEL PUMPS.
288
FUEL PUMPS
Proven to be a trouble-free mechanical pressure pump. Original equipment on numerous airframe installations and adaptable to most applications with one of 3 dual diaphragm types. Overboard vent of this design provides operating assurance throughout all flights. Engine Type Engine Model No. Our P/N Lycoming Part No. Our Price
O-235, O-290, O-320, 41271 $378.00 05-19000 Lycoming O-340, O-360, HO-360, 4-6 PSI (Core LW15472 GO-480, O-540, VO-540 05-02534 $100.00) IO-320, IO-360, AIO-360 41234 05-19010 $379.00 HIO-360, IVO-360, 25-30 PSI LW15473 (Core IO-540, IGO-540, IO-720 05-02532 $100.00) Continental Can be used on A/C 41272 $379.00 who (old 40595) LW15473 (Core formerly used low pres25-30 PSI $100.00) sure (15 PSI) carb. C-75(-12,-12F),C-90 05-19045 (-8,-8F,-12,12F) AF40695 $325.95 (Core $100.00)
C-90 (-16F), 0-200 05-19050 AF631391 $798.00 Adapt pump thread to AN fittings using AC Fuel pump adapters: P/N 75505 .. Fitting .. $43.75 or P/N 75505-1 . Fitting & O-Ring .$43.50
P/N 07-00783
P/N 07-00782
These fittings are designed to fit mechanical fuel pumps used on Lycoming engines. These fittings feature 3/8 AN flare outlets for connection to aircraft hoses, and are available in straight, 45 and 90 angle versions. Note: These fittings are not certified.
SOLID-STATE TYPE PUMPS - Measure less than 3 in any direction and weigh only 18 oz. Fuel is supplied as soon as the ignition is turned on so the engine will start faster at colder temperatures. Built-in pressure relief prevents flooding and assures fast re-starts on hottest days. The all-steel plated case is water tight. Mounts with two bolts. For best results, mount the pump close to the fuel tank and below the liquid level. The tank is self-priming to 18 fuel lift. Standard 12 V models require only 1 amp at max. delivery. All of the pumps shown feature a all nylon valve and plunger. FACET NO. 40104 - 12V Neg. Ground, 4. - 1.5 PSI Max.,25GPH. 1/8 x 27 internal pipe ports............................... P/N 40104 ................... $33.85 FACET NO. 40105 - 12V Negative Ground, 3.0 - 4.5 PSI Max., 30 GPH. 1/8 x 27 internal pipe ports...... P/N 40105 ................... $33.50 FACET NO. 40106 - 12V Negative Ground, 4.5 - 6 PSI Max., 30 GPH. 1/8 x 27 internal pipe ports...................... P/N 40106 ................... $33.65 FACET NO. 40163 - 12V Neg. Ground, 2.5-1.5 PSI Max, 17 GPH, 1/8 x 27 internal pipe ports............................... P/N 40163 ................... $53.50 FACET NO. 40164 - 24V Negative Ground, 4-C PSI Max, 30 GPH, 1/8 x 27 internal pipe ports ............................ P/N 40164 ................... $42.85 FACET NO. 40171 - 12V Neg. Ground, 3.5 - 2 PSI Max, 15 GPH, 1/8 x 27 internal pipe ports............................... P/N 05-40171.............. $48.50 FACET NO. 40288 - 12V Neg. Ground, 4.5 - 3.0 PSI Max, 30 GPH, 1/8 x 27 internal pipe ports. ........................... P/N 05-06860.............. $35.75 FACET NO. 40289 - 12V Neg. Ground, 0 GPH, 1/8 x 27 internal pipe ports......................................................... P/N 05-06861.............. $35.75 FACET NO. 40108/40154 - Aircraft Spruce now carries 12V and 24V electric fuel pumps which have AN-style 37 male dash 6 fittings built into the fuel pump to provide a simpler fuel line hookup than with the internal pipe threads on the older Facet fuel pumps. 4-6 Psi .................... P/N 40108 (12V) ......... $44.75 15 GPH. ................. P/N 40154 (24V) ......... $44.50 Facet filter for solid-state pumps ............. P/N 479735 ............. $4.45 ea. Facet Gasket & Filter FEP 42370 ........... P/N 05-01019................ $6.75 The pumps above do not feature an anti-siphoning valve and fuel will flow through them in event of pump failure.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
P/N 07-00780
Straight fitting P/N 07-00780... $3.30 45 fitting ....... P/N 07-00781... $9.85 90 fitting ........P/N07-00782 ... $7.50 Tee fitting w/1/8 pipe thread tapping for P/N 07-00781 fuel pressure ..P/N 07-00783 ..... $16.50
On the recommendation of Rutan Aircraft Factory, we now stock Aeroquip #2071-6-6S fitting which is a steel elbow with a swivel nut which fits the 37 flares on the Facet 40108 and 40154 fuel pumps. This Aeroquip fitting makes installation of the pumps easy & economical. P/N 04-05800 ............ $4.95
Designed to keep the fuel pump cooler in the hot engine compartments, and reduce the risk of fuel vapor lock. The cooling shroud will fit carbureted or fuel injector Lycoming engines using a diaphragm style pump. Made in the U.S.A. P/N 08-06097 ..................$63.85
Fuel Compatibility: All models of the Facet Posi-Flo Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. Reliability: Proven on thousands of original equipment applications. No bearings, electrical contacts, or diaphragms to wear out or fatigue. Lasts four to five times longer than many other electric pumps. Easy to Install-Easy to Service: Two bolt installation plus the small size makes installation easy. For best results, mount the pump close to the fluid or fuel tank and below the liquid level. Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes. Not FAA Approved.
PSI Lift Model Volts Max- Fitting Size Min. Min Dry 60300 60301 60302 12 12 12 4-2.5 1/8-27 INT 5-3.5 1/8-27 INT 7-5 1/8-27 INT 20 30 32 Check Valve Y Y Y Int.Positive Ext. Shut Off Fuel Valve Filter N EXT. N EXT. N EXT.
Fuel Compatibility: All models of the Facet High Performance Gold-Flo Solid State Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives. Reliability: An enhanced version of the Interrupter model. It has Solid State circuitry and will meet or exceed all performance specifications and is totally interchangeable. (These pumps have demonstrated an endurance life almost double that of the nearest competitor, according to our test data). Easy to Install-Easy to Service: Two bolt mounting makes installations easy. Nothing to adjust. The pump is self-priming to 24 inches vertical fuel lift. Vertical mounting is preferred to assure maintenance of rated pressures. An installation kit is available for replacement applications. The only service normally required is a simple cleaning of the filter and fuel inlet cavity. Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes. Available Features: 12 - 24 inches dry lift 20 - 45 GPH 1 - 8 PSI Transient Protection - 24 volt only State of the art Electronics Sealed Electronics Built in Anti-Siphon Valve (Positive shut-off) UL Certified VCA Certified Complies to Mil-std461D Replaceable 74 micron filter Built in magnet to collect metal particles for additional filtration 1.6 amp average Self Priming and Self Regulating 32 ounces and 5 inches Corrosion Resistant over 100 hours of salt spray Operating Temperature Range: -40F to 180F.
Facet No. 480545-12V Neg. Ground, 4-5 psi, 30gph. Incl. antisiphoning valve. Used on Maule aircraft. 478360E-12V Neg. Ground, 4-5 psi, 30 gph. W/o antisiphoning valve. Used on some Piper aircraft. 476088-24V Negative Ground, 4-5 psi, 30 gph. Used on some Piper and Grumman models. 480543-12V Neg. Ground, 6.5-7.5 psi, 45gph. Used by some engine rebuilders and aircraft modification shops. Facet filter for interrupter pumps. 480534E- 12V Negative Ground, 8.-6 psi, 45gph, 1/4-18 fitting 480564E- 24V Negative Ground, 4-5 psi, 32gph. Includes anti-siphoning valve. 1/4-18 fitting. Part # 480545 478360E 476088 480543 479729 05-00802 05-01003 Price $77.25 $75.85 $74.85 $93.95 $3.65 $79.95 $97.50
289
PUMPS
Pumps Model No. Part No. Price Volt GPM Approvals M-150S-AV-PO 08-07463 $376.00 12-Volt 15 GPM / 57 LPM M-3025-CB-AV-PO 08-07464 $643.00 12-Volt 25 GPM / 95 LPM M-3120-AV-PO 08-07465 $604.00 115-Volt 20 GPM / 75 LPM M-3130-AV-PO 08-07466 $989.00 115/230-Volt 30 GPM / 114 LPM
IN EL AV TO PS BV
Calibrated in Gallons Model No. & Part No. Price Calibrated in Liters Meter Model No. & Part No. Price Flow Range Use with
METERS
08-07464 MR-5-30-G8N, Aviation $643.00
08-07468
$229.00
Gasoline, Gasoline/Ethanol blends at levels designated as gasohol (E10 maximum), diesel, kerosene, aviation gasoline (AVGAS 100LL) and kerosene grade (JET A).
COMBOS
08-07469 08-07470 08-07471 Special Order. Please request a quote. M-3025CB-AV-PO / MR 5-30-G8N M-3120-AV-PO / MR 5-30-G8N M-3130-AV-PO / MR 5-30-G8N M-3025CB-AV-PO / MR 5-30-L8N M-3120-AV-PO / MR 5-30-L8N M-3130-AV-PO / MR 5-30-L8N $874.50 $825.00 $1,188.00 Special Order. Please request a quote.
290
The following gaskets are FAA-PMA approved for use on the following engines: W-670-6A, -6N, -16, -K, -M, -23, -24. Part No. Model Description COMPLETE OVERHAUL GASKET SET TOP OVERHAUL GASKET SET CYLINDER REPLACEMENT SET INTAKE PIPE SEAL AT CASE MAGNETO MOUNT GASKET (VMN TYPE) STARTER MOUNT GASKET OIL SCREEN HOUSING GASKET GASKET INTAKE PIPE AT CYL. CYL. BASE SEAL ACCESSORY CASE GASKET DUPLEX PUMP MOUNT GASKET DUPLEX INTERNAL GASKET ROCKER COVER ROCKER COVER RUBBER TYPE BLACK SEAL PUSH ROD TUBE LIFTER GUIDE GASKET LIFTER GUIDE GASKET RUBBER TYPE ROCKER HOSE . SEAL SCAVAGE OIL LINE BETWEEN CASES FUEL PUMP MOUNT GASKET ROCKER ELBOW GASKET SCAVAGE PUMP LEAD GASKET OIL OUTLET GASKET MAGNETO DRIVE GEAR SEAL FRONT SUMP GASKET REAR SUMP GASKET DUPLEX OIL PUMP SEAL SCAVAGE PUMP SEAL FUEL PUMP GASKET GENERATOR MOUNT GASKET TACH DRIVE GASKET SCAVAGE PUMP MOUNT GASKET AIR HORN TO CARB. GASKET CARBURATOR MOUNT GASKET MAGNETO MOUNT GASKET (SF7 TYPE) PUSH ROD TUBE GASKET PUSH ROD TUBE GASKET RUBBER TYPE STEP DRIVE TO CASE GASKET STEP DRIVE GASKET STARTER MOUNT GASKET (Thick) Price $507.00 $297.95 $56.95 $9.95 $9.95 $8.50 $4.35 $15.75 $5.50 $31.25 $8.50 $8.50 $5.95 $10.25 $5.95 $5.25 $6.75 $7.75 $4.25 $6.75 $2.50 $10.25 $3.40 $27.25 $5.95 $5.95 $17.25 $21.25 $6.75 $5.95 $4.35 $8.50 $8.50 $5.95 $8.50 $5.25 $6.75 $5.25 $6.75 $12.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
08-07232 TA22075 08-07233 TA22065 08-07234 YA22055 08-07235 YA2096-1 08-07236 YA2247-1 08-07237 YA2249-1 08-07238 YA2589-1 08-07239 YA2827-1 08-07240 YA2845-1 08-07241 YA3112-1 08-07242 YA3710-1 08-07243 YA3939-1 08-07244 YA20254-1 08-07245 YA20254-R 08-07246 YA20266-1 08-07247 YA20268-1
Contents Pump + Bracket (PX375-40A-525-F + KX10) Filter+ Pump+ Bracket (FX375-MK + PX375-40A-5-25-F + KX10) Filter+Pump+ Bracket Valve + Gascolator + Bulkhead fitting (FX375-MK + PX375-40A-5-25-F + KX10 + FS20x7-T + GAS375-F + BH375) Pump + Bracket + 2 x Gascolator Valve + Bulkhead fitting (PX375-40A-525-F + KX10 + 2off GAS375-F + FS20x7-T + BH375) Contents Pump + Bracket (PX375-40A-5-28-F + KX10) Filter + Pump (PX500-TC + FX375-MK) Filter+ Pump+ Bracket Valve + Gascolator + Bulkhead fitting (FX375-MK + PX375-40A-5-28-F + KX10 + FS20x7-T + GAS375-F + BH375) Pump + Bracket + 2 x Gascolator Valve + Bulkhead fitting (PX375-40A5-28-F + KX10 + 2off GAS375-F + FS20x7-T + BH375)
Price $722.00
07-01353
$770.00
07-01354 $1,094.00
08-07254 YA20748-1 08-07255 YA20889-1 08-07256 YA20951-1 08-07257 YA20952-1 08-07258 YA20977-1
Fuel System FS-S/DESuper LUX-360 Deluxe Engine Description Andair PN Size Pump Kit PK-540
07-01355 $1,195.00
PN 07-01356 07-01357
08-07262 YA22443-1 08-07263 YA22446-1 08-07264 YA22453-1 08-07265 YA22803-1 08-07266 YA22931-1 08-07267 YA24335-1 08-07268 YA24355-R 08-07269 YA500060-1
IO540IO580
07-01358 $1,100.00
07-01359
$995.00
291
BENDIX-SCINTILLA MAGNETOS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
8 9 10 11 11A 12 13 Ref. No. 1 2 3 4 5 6 7 Part No. 10-50727Y 10-400012 10-22067 10-357592 10-157134 10-81806 2-161-1 2-161-2 2-161-3 2-161-4 2-161-5 2-161-6 ------ 10-25788 10-90788-5 10-157123Y 10-157120Y 10-3503 2-199-1 2-199-2 Description Housing - Magneto Plate - Mag Ident Drive Screw - Ident Plate Oil Seal - Drive Shaft Vent - Mag Housing Bearing - Mag, Drive End Shim Washer - .0025 Shim Washer - .004 Shim Washer - .005 Shim Washer - .008 Shim Washer - .010 Shim Washer - .012 (Drive End Bearing) Magnet - Rotating Bushing - Drive Shaft Key - Woodruff Gear-Distrib., Small (S4) Gear-Distrib., Small (S6) Spacer-Brkr End Bearing Shim Washer - .002 Shim Washer - .004 Price Ea. $524.00 $21.75 $18.95 $3.95 $32.75 $2.85 $6.50 $3.00 $2.45 $3.20 $2.90 ------ $27.85 $1.74 $58.75 $38.65 $1.85 $1.96 $1.97 Ref. No. 13 Part No. Description 2-199-3 Shim Washer - .005 2-199-4 Shim Washer - .008 2-199-5 Shim Washer - .010 2-199-6 Shim Washer - .012 -------(Breaker End Bearing) 2-202 Bearing-Magnet, Brkr End 10-88543-1 Cam - Breaker 10-51354 Washer-Plain (Cam Screw) 10-35936-10 Screw - Cam 10-357164 Coil 10-50765 Clamp - Coil Core -------Washer - Lock 10-35937-8 Screw - Coil Core Clamp 10-5752 Clip - Primary Lead 10-16479 Screw Housing - Distributor Plug - Distributor 10-157135 $3.90 Housing Bushing - Ground Terminal 10-52949 Block - Distributor (S4) $83.50 10-52958 Block - Distributor (S6) $122.95 Spring-H.T. Cable 10-50737 $0.63 Contact Price Ea. $1.82 $2.15 $1.80 $1.81 ------$43.50 $31.85 $1.85 $2.35 $156.95 $5.95 ------$2.20 $2.80 Ref. No. 30 31 32 Part No. ------------10-357584 Description Washer - Plain Screw - Distributor Block Gear-Distrib., Large $72.65 (S4)** Gear-Distrib., Large $158.50 (S6)*** Washer - Felt $0.98 Ring-Retain. $0.81 (Distrib.,Gear) Brush - Carbon $7.50 Screw $2.47 Breaker Assembly* Washer - Plain $1.89 Screw $2.60 Washer - Lock Screw - Lead to Breaker ------Condenser $25.75 Cover - Breaker Screw - Breaker Cover $2.60 Oil Slinger - Drive Shaft $9.75 Price Ea. -------------
BENDIX MAGNETOS (Outright Purchase) S4LN-20 (RH) ............P/N 10-600644-1 ....... $1,334.00 S4LN-21 (LH) ............. P/N 10-500514-1 ......... $1,525.00 All above magnetos have impulse coupling.
REMANUFACTURED BENDIX MAGNETOS
S4LN-20(RH) 10-51360-29R .....$578.00 S4LN-21 .... 10-51360-26R ....... $580.00 D3000 .... 10-682555-11R .$1,534.00 S4LN-21(LH) 10-51360-37R .....$698.00 S4LN-21 .... 10-51360-37R ....... $698.00 1200....... 10-68255-14 ......$1,395.00 200 Series 10-16305-9 ..........$523.00 1200 .......... 10-34937-4............ $673.00 10-34931-1 ...........$508.00 10-51365-47R .....$670.00 D3000 ....... 10-68256-11....... $1,449.00 10-51360-27R ......$585.00 10-51360-28R .....$588.00 10-51365-39.......... $654.00 10-79020-10 .........$549.00 10-500516-4 ........$736.00 Exchange Price. Add $190.00 core charge to price above. Refundable with return of rebuildable exchange magneto. ALL MODEL NUMBERS AVAILABLE For a complete listing of Hartzell Engine Technologies and Tempest Overhauled Magnetos & replacement parts see www.aircraftspruce.com
Magneto Units per Replacement Engine 10-51360-27 (Rt. 1 A-65-8, A-75-8, S4RN-20 Side) 10-51360-28 (Lt. C-75-8, C-85-8 1 S4RN-21 Side) with original crankcase A65-8, A-75-8, C-75-8, C-85-8 with current crankS4RN-21 10-51360-28 2 case castings No. 6794 & No. 6795 C-75-12F, C-85-8F,C-85S4LN-21 10-51360-26 2 12F, C-90-12, C-115, C-125-2, S6LN-21 10-51365-39 2 C-145-2, C-145-4 E-165-2, E-185-2 (above Continental S/N 10111) E-185-3, E-185-9 (above S/N 10-51365-43 2 5937) (above S/N 20922), S6LN-20 E-225-4, E-225-8 (all), O-470-7 (above S/N 5937) GO-300A, GO-300B S6RN-21 10-51365-35 2 O-470-2, -4, -13, -A, -B, -E, -G, -J, -K, -L, -M, S6RN-25 10-79020-8 2 BGSO-526-A O-470-13A S6LN-23 10-52350-20 2 PE-150-2, -6 Packette S6LN-23 10-52350-20 1 FSO-526-A S6RN-26 10-85290-2 2 6A4-150-B3, 6A4-165-B3 S6RN-21 2 Franklin 6V4-178-B3, -B33, S6RN-21 10-51365-48 2 O-335-2, -3 Make Model *See Listing Below.
Engine
Magneto Type
Magneto Type Model 6V4-200-C32, -C33, O-335-2, S6RN-23 -3, -5, -6 Franklin 6A4-200-C6 S6RN-23 O-145-B2, -B3, -C2, -C3, S4LN-20 O-235-C, O-235-C1, -C1A, S4LN-21 O-320-A1A, -A2A, -B1A, -B2A, S4LN-21 O-340-A, -A1A, -A2A, -B1A, B2A, O-360S4LN-21 A, -A1A, -A1B , -B1A, -B2A O-290-G (single ignition) S4LN-21 GO-435-C2, -C2A, -C2B , -C2B2, -C2C, -C2E, GO-480, S6LN-20 -B, -B1A6, -B1C, -B1D, -C1A, -C1D6, -C2E6, S6LN-21 -F1A6, -F2A6, -F3A6, -F4A6 Lycoming O-435-19, -20, VO-435A, -A1A, -A1B, -A1C, -A1D, S6LN-20 GO-480-C1B6, -D1A, -G1B6, GSO-480-A1A6, S6LN-21 -A1C6, -B 1A6, -B1B6,-B1C6 O-435-6, -6A, -23, -23A, S6LN-22 -23B, -A1C (optional), O-480-1 S6LN-23 O-435-17, GO-435-C2, -C2A, S6LN-20 -C2B, -C2D, GO-480-B1, -B1B, -C2C6, S6LN-21 -F3B6, -F4B6 S6LN-20 O-540 S6LN-21 **New P/N 10-357584.
Magneto Units per Replacement Engine 10-52350-19 10-52350-21 10-51360-29 10-51360-30 10-51360-30 (25 Lag) or 10-51360-25 (35 Lag) 10-51360-25 10-51365-31 10-51360-32 10-51365-33 10-51365-34 10-52350-22 10-52350-23 10-51365-44 10-51365-45 2 2 1 1 2 2 1 1 1 1 1 1 1 1 1
14 15 16 18 19 20 21 22 23 24 25 26 27 28 28A 29
32A 10-357586 33 36 37 38 39 40 41 42 43 44 45 46 10-50752 10-9595 10-157158 10-14268 10-35936-6 ------------10-51676 10-157161 10-51678 35 10-92815-37
292
BENDIX-SCINTILLA MAGNETOS
BREAKER ASSEMBLIES Early S4, S6 Mags P/N 07-06305 (10-357173) with spring (current production) ..................................................... $34.75 Ea. P/N 07-06306 (10-357174) without spring (current production) ..................................................... $35.65 Ea. All above breaker assemblies used on either Right or Left Magnetos. Late S4/S6 Mags, S200 Mags* P/N 10-382584 (LH) .................................................... $39.75 Ea. P/N 10-382585 (RH).................................................... $37.50 Ea. Used on many late Lyc. engines. Note: Specify Bendix mag P/N e.g., 10-51369-29
BENDIX
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
REPLACEMENT COILS FOR CONTINENTAL ENGINES PER SERVICE BULLETIN NO. 637
TCM Ignition Systems has issued Service Bulletin No. 637 to retire from service certain older coils and rotating magnets. The Bulletin applies to many S-20, S-200, S-600, and S-1200 series magnetos as identified in this chart. Compliance with this Bulletin is required at the next 100 inspection, annual inspection, or progressive maintenance inspection, whichever comes first. Order by new coil part number. Magneto Series S-20 S-20 S-200 S-1200 Old Coil P/N 10-51303 10-76384 10-160886 10-163172 10-163209 10-160887 10-349271 Color Opaque amber to Dark Purple Opaque Amber to Dark Purple Opaque Amber New Coil P/N 10-357164 10-357165-1 10-391088-1 Color Our Price Bright Red to $156.95 Dark Red Bright Red to $156.95 Dark Red Blue to Olive Green $198.00 to Black
Replacement part for existing alternator filters. Wire wont break at the case and its clamp is made from heavy gauge steel. Double the capacitance compared to OEM alternator filters. For stubborn alternator noise, this Alternator filter combined with the Eliminator (P/N 11-08055) can trap a wide frequency range of electronic noise. Both of these filters have been thoroughly tested under a DO 160D and are FAA/PMA approved. P/N 11-08060..............$59.95
ALTERNATOR FILTER
MAGNETO FILTER
Eliminates ignition noise. Install in primary lead of magneto. Not FAA approved. P/N 07-03200 ..... $59.90 ea Attenuates both low and high frequencies of noise generated from bendix magneto ignition systems. This filter has been used by avionics shops, OEM aircraft manufacturers, and FBOs, to attenuate and suppress pulsating noise generated by their aircrafts magneto systems. The magneto filter is FAA-PMA approved and is compatible with the bendix series S20, S21, S200, D3000, D4000 magneto. 1000 VDC working voltage, 5000VDC break down voltage. Capacitance: .05 uf-self healing technology. Heavy duty mounting clamp. Temp. range: -35C to +80C. Max. current: 20 amps P/N 07-00713 .......... $68.80 #10-27165 - Factory recommended lubricant for bearings in Bendix magnetos. 1 Lb. Can ..... P/N 10-27165 .... $62.75 #10-391200 - For use on distributor block bushing. Provides proper shaft lubrication. 8 oz. can ...... P/N 10-391200 .. $64.50 1 oz. tube ..... P/N 07-02500 ...... $3.95 Stop Cutting Grommets! Stretch grommets over large plugs and fittings. Great for spark plug wires or molex plugs. P/N 11-06946 ........................... $24.75
1 2 3 4
1 1 1 1
NUT - Coupling (Ground Terminal) CROMMET Assy.(Ground Terminal) FERRULE - Inner (Ground Wire) SLEEVE - Insulating (Ground Wire)
For 20 series mags. Kit No. P/N 10-52305 . $74.65
No. Req. 1 1 1 1 1
Description NUT - Coupling (Ground Terminal) FERRULE - Outer (Ground Wire) FERRULE - Inner (Ground Wire) SLEEVE - Insulating (Ground Wire) WASHER - Ground Wire Contact
GROMMET STRETCHER
Part No. Price 10-40166-4 .....................$246.95 10-40166-6 .....................$252.95 10-40167-4 .....................$253.85 10-40167-6 .....................$249.95 10-40167-10 ...................$259.50 $40.00 core charge applies
P-leads for all aircraft using a Slick or Bendix Style Magnetos. This includes nearly all piston aircraft such as: Cessna, Piper, Grumman, Mooney, as well as many homebuilt and experimental aircraft. As a general rule cables should be replaced when ever wear is apparent. Broken ground leads should not be permitted. A drop in rpm is expected when one magneto of the two mags is shut off. Should the propeller be moved by hand and a functional hot magneto exists, the engine may fire causing injury. If there is no drop in rpm the owner should call a mechanic immediately. Bogert is using 14gauge MS27500 wire with aviation approved terminals. The shrink tube has an adhesive inside the sleeve to improve durability and reduce the possibility of corrosion. Cables are ready to install.
Length inches 30 36 42 48 54 60 66 7 84 96 108 120 132 144 156 168 180 192 204 216 228 240
293
CM WP ME HA AP LG EP CS IN
1 1 2 1 1 3 1 1 1 1 1 1
Contact Assy. Kit (3) Capacitor hese magneto repair kits are designed to simplify the Bendix magneto overhaul process Bearings by providing all of the commonly needed overhaul parts in one convenient kit. The Oil Seal Repair Kits contain the parts needed for minor repair such as a 500 hour inspection, Oil Slinger and the Deluxe Repair Kits contain the parts needed for major repair such as a magneto overWoodruff Keys haul. These parts are highest quality direct replacement parts and are approved for installaCotter Pin tion and use on certificated aircraft. The Repair Kit and Deluxe Repair Kit for the Bendix -200, Cam Screw -201, and -202 series magnetos contain two sets of contact assembly kits. Some parts that Felt Washer may be need replacing during magneto overhaul are not included in these kits. Felt Strip Snap Ring Carbon Brush
Bendix series
EL AV TO PS BV
Magneto P/N 10-51360-1 10-51360-3 10-51360-4 10-51360-6 10-51360-8 10-51360-10 10-51360-11 10-51360-12 10-51360-25 10-51360-26 10-51360-27 10-51360-28 10-51360-29 10-51360-30 10-51360-31 10-51360-33 10-51360-37 10-51360-40 10-51360-41 10-51360-45 10-51360-46 10-51360-47 10-51360-48 10-51360-54 10-51360-55 10-51360-58 10-51360-1 up to S.N.238468 10-51365-1 up to S.N.238469 10-51365-2 10-51365-5 10-51365-7 10-51365-9 10-51365-13 10-51365-14 10-51365-15 10-51365-16 10-51365-17 10-51365-20 10-51365-25 10-51365-26 10-51365-27 10-51365-28 10-51365-29 10-51365-30 10-51365-31 10-51365-32 10-51365-33 10-51365-34 10-51365-35 10-51365-39 10-51365-40 10-51365-41 10-51365-42 10-51365-43 10-51365-44 10-51365-45 10-51365-46 10-51365-47 10-51365-48 10-51365-53 10-51365-54 10-51365-57
Magneto Type
S4R(L)N -20,21
07-00855
$100.95
07-00854
$298.00
S4R(L)N -20,21
07-00825
$99.65
07-00856
$312.95
S4R(L)N -20,21 S4R(L)N -20,21 S4R(L)N -20,21 S4R(L)N -20,21 S4RN-21 S4R(L)N -20,21 S4RN-21 S4RN-21 S4R(L)N -20,21 S4R(L)N-20, 21 S6R(L)N-20, -21 S6R(L)N S6R(L)N -20,21 S6R(L)N -20,21 S6R(L)N -20,21
07-00855 07-00825 07-00855 07-00825 07-00860 07-00825 07-00860 07-00858 07-00825 07-00860 07-00862 07-00864 07-00862 07-00864 07-00862
$100.95 $99.65 $100.95 $99.65 $142.95 $99.65 $142.95 $131.95 $99.65 $142.95 $94.75 $94.75 $94.75 $94.75 $94.75
07-00854 07-00856 07-00854 07-00856 07-00859 07-00856 07-00859 07-00857 07-00856 07-00859 07-00861 07-00863 07-00861 07-00863 07-00861
$298.00 $312.95 $298.00 $312.95 $339.95 $312.95 $339.95 $338.95 $312.95 $339.95 $373.95 $368.00 $373.95 $368.00 $373.95
S6R(L)N -20,21
07-00864
$94.75
07-00863
$368.00
S6R(L)N -20,21
07-00862
$94.75
07-00861
$373.95
S6R(L)N -20,21
07-00864
$94.75
07-00863
$368.00
294
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
295
P/N BEND SLICK 8 CYL. ELBOW STRAIGHT Our P/n Price KA17012 X X X 08-01216 $509.00 KA17012E X X X 08-01217 $571.00
296
SLICK MAGNETOS
These new lightweight aircraft magnetos are being used by many new equipment manufacturers. Weigh only 3-3/4 lbs. compared to 6-1/4 lbs. for typical old style magnetos. All units carry a six-month warranty after delivery to the user. These new model magnetos are completely rebuildable. The old 4000/4100 magnetos may not be returned as an exchange unit for a new magneto of the same model. Most other Magnetos may be returned for core credit. Drive gears are not included. *When purchasing slick magnetos separately gaskets are not included. IF NO CORE IS RETURNED, ADD $150 TO THE PRICE OF A NEW MAGNETO.
CM WP
ALL SLICK MAGNETO AND HARNESS PRICES SHOWN ARE WELL BELOW SLICK FACTORY LIST PRICE. WE WILL BEAT ANY COMPETITORS ADVERTISED PRICE!
Slick Harnesses are available in Black and Red. Please Specify color choice at the time of order.
ME HA AP LG EP CS IN EL AV TO PS BV
4330
4301
4370
L.H., no Impulse L.H. with Impulse L.H. with Impulse R.H. with Impulse
$749.00
5/8-24
$366.95
4371
$834.00
3/4-20
$378.95
PLEASE REMOVE DRIVE GEARS BEFORE RETURNING MAGNETO CORES FOR CORE CREDIT.
Starts determined by engine manufacturer. Lag angles: 4350 - no lag, 4351 - 20 lag, 4281 - 5 lag. Magneto Flange Gaskets not included. Order Lic. #62224 or Cont. #535324.
4373 4316
$834.00 $979.00
5/8-24 5/8-24
$271.95 $274.95
6364
Continental GO-300
6367
Continental
5/8-24 $584.00
Rebate does not apply to Slick Magneto cores. Factory rebates subject to change by factory. Slick requires a minimum of 90-120 days to process rebates. Rebates are sent direct from Slick to the purchaser, not through Aircraft Spruce.
Slick Magneto upgrade kits available for most Continental & Lycoming Engines. Provide engine make & model and spark plug size and request quotation on applicable upgrade kit. 6300 Series Replaces 6210 & 6262 magnetos. Includes new improved case and bearings.
297
LG EP CS IN EL AV
K4520 K4317 Slick Kit Part No.
Part No.
K4517
Lycoming: 0-235-C1, C2A, E2A, F2A; G1, G2A, J2A 0-290-D 0-320-A1B, A2A, A2B, A3A, A3B B1A, B1B, B2A, B2B, B3A, B3B, C2A, C2B, C2C, C3A, C3B, C3C, D1A, E1A, E2A, E2H 10-320-B1C, B2A, E1A, E2A, AE10-320-E1A, E2A 0-360-A1AWD, A2A, A1H, A3A, A4A, A4J, B2A, C1A, C1G, C2A, D2A 10-360-A1B, B4A, AE10-360-A1D, B4A Lycoming: 0-235-C1, C2A, C2B, E2A, F2A, F2B; G1, G2A, J2A 0-290-D 0-320-A1B, A2A, A2B, A3A, A3B, B2B, B3A, B3B, D1A, D1C, D1F, D2A, D2C, E1A, E2A, E2H, E3H 10-320B1C, B2A, D1A, DIB, E1A, E2A A10-320-AIB, B1B, C1B AE10-320-DIB, D2B, E1A, E2A 0-360-A1A, A1AWD, A1FG, A1G, A1G6, A1H, A2A, A2F A2G, A3A, A4A, AHG, A4J, B2A, C1A, C2A, D2A 10-360-A1B, B4A, C1D6, F1A AE10-360-B4A Continental:C-75-12, 15 C-85-14, 15, C-9012, 14, 16, 16F 0-200-A, B, C Consists of 4333 AMAG + One Drive Gear A-65 All, A-75 All (Except -12,-15) C-85 All (Except-12, 14, & 15) Includes Drive Gears
Price Add $300.00 Core Charge to Magneto Shaft Rotation (Right or Left) - See all kits dataplate on current magneto ___________ Lag Angle __________________________ $1,937.00 b) Number of Direct Drive (Non-Impulse) Magnetos __________________________ c) Number of Retard Breaker Magnetos ___ d) Are the magnetos pressurized ? ______ e) Spark plug size (5/8 or 3/4) _________ 5. Do you want to upgrade from a single impulse to a dual impulse system? ______
$1,941.00
$2,196.00
$2,196.00
$2,048.00 $1,080.00 $2,364.00 If yes, you will need to purchase an M3154 Adapter or a magneto equipped with an Price Add $300.00 M3154 Adapter to be able to reuse the existCore ing harness. Alternately, purchase a new harCharge to ness configured for 6200 Series magnetos. all kits $2,413.00 $2,415.00 $3,057.00 $2,188.00 7. Are you upgrading a complete engine form a TCM/ Bendix to a Slick system ? _______ 6. Are you upgrading from a 600 Series to a 6200 Series magneto? ___________________________________
TO PS BV
K4335 K4334
Part No.
K6520
0-470, B-C1, C, E, G, G-C1, H, J, K, K-C1, L, L-C1,M, M-C1, N, P, R, S, U 10-470-A, C, D, E, F, G, H, J, K, L, LO, M, N, P, R, S, T, U, V, VO10-520-A, B, BA, BB, C, CB, D, E, F, G, H, J, K, L, M, MB, N, NB
K6320
If yes, purchase a complete Engine Upgrade Kit. Add $300.00 core charge to all kit prices (refundable with return of old Magnetos) Request quotation for kits for unlisted engines. * Plugs included.
298
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FOR A COMPLETE APPLICATION GUIDE AND PART NUMBERS PLEASE VISIT WWW.AIRCRAFTSPRUCE.COM
299
ME HA AP LG EP CS IN EL AV TO PS BV
1 $215.95
1 $81.50
300
SLICK START
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
LASAR, which stands for Limited Authority Spark Advance Regulator, is the first microprocessor based engine control system approved by the FAA for general aviation piston aircraft. With the system operating in its automatic mode, cylinder head temperature, manifold pressure, and engine speed (RPM) are monitored by the LASAR controller to establish and command the optimum ignition timing and spark energy to produce maximum torque from the engine. LASAR has an inherent mechanical magneto backup system that automatically assumes control if electrical power is interrupted or if the microprocessor detects a system fault. STC approval has been granted for most 320, 360 and 540 engines. Installation requires repalacement of standard magnetos with Lasar magnetos, a LASAR Control Box, which is mounted to the firewall, a low-voltage control harness that carries the electronic signals between the system components. Specify exact aircraft and Engine Models for quotation or Lasar systems. *When purchasing slick magnetos separately gaskets are not included. Benefits from LASAR include: * Better engine starting with 3 times more spark energy and higher output voltage. * Smoother transition in ignition timing from engine start to idle * Faster Rate of Climb * Increased spark plug life * EGT reduced by 150F on average * Up to 12% Reduced Fuel Consumption * Up to 8% Increased Horsepower. Components Part No. Price Components Part No. Price Champion LC1011-04 Lasar Controller 08-06167 $3,734.00 Champion 4771Slick Lasar Mag. 08-06224 $2,351.00 Champion LC1011-10 Lasar Controller 08-06168 $3,734.00 Champion 4755Slick Lasar Mag. 08-06162 $2,379.00 Champion LC1011-14 Lasar Controller 08-06169 $3,734.00 Champion 4776Slick Lasar Mag. 08-06163 $2,378.00 Champion LC101115 Lasar Controller 08-06170 $3,734.00 Champion 6755 Slick Lasar Mag. 08-06164 $2,414.54 Champion Lasar Controller Core Charge 08-14778 $250.00 Champion 6766 Slick Lasar Mag. 08-06165 $2,378.00 Champion 6776 Slick Lasar Mag. 08-06166 $2,414.54
The Slick Assembly Tool Kit is required to install all Slick Ignition Harness Leads on all magneto harness caps and spark plug termination ends. The complete kit includes: Pressing Tool, #72 Drill Bit, Pin Vise, Stripping Tool, Spring Assembly Tool, and Shield Stripper. Complete instructions for the use of this kit can be found in the Unison Industries L-1178 Service Manual. P/N 12-00720 ................................$189.50
These magneto repair kits and deluxe repair kits are designed to simplify the Bendix magneto overhaul process by providing all of the commonly needed overhaul parts in one convenient kit. The Repair Kits contain the parts needed for minor repair such as a 500 hour inspection, and the Deluxe Repair Kits contain the parts needed for major repair such as a magneto overhaul. These parts are highest quality direct replacement parts and are approved for installation and use on certificated aircraft. AB-200445SC-D and AB-200445SC-R kits contain two sets of contact assembly kits. Some parts that may be need replacing during magneto overhaul are not included in these kits.
4 CYLINDER KITS
Repair Kit Type MINOR MINOR MINOR DELUXE DELUXE DELUXE Tempest Kit P/N AB-484SC-R AB-485SC-R AB-200445SC-R AB-484SC-D AB-485SC-D AB-200445SC-D Part No. 10-04844 10-04845 10-04849 10-04851 10-04852 10-04855 Price $145.95 $142.95 $168.95 $375.95 $348.95 $374.95
6 CYLINDER KITS
Repair Kit Type MINOR MINOR MINOR DELUXE DELUXE DELUXE Tempest Kit P/N AB-684SC-R AB-685SC-R AB-200645SC-R AB-684SC-D AB-685SC-D AB-200645SC-D Part No. 10-04847 10-04848 10-04850 10-04853 10-04854 10-04856 Price $145.95 $142.95 $168.95 $399.85 $399.95 $424.95
301
Continental Engines Aero-Lite Part No. C16-2BS-II C16-4BS-II C16-2AS-II C31-1AS-II C9-2BS-II C1-5AS-II C3-2AS-II C1-1AS-II
Lycoming Engines
replaces replaces Aero-Lite replaces replaces Slick Champion Part No. Slick Champion M1730 M1740 M1978 M2007 M2015 M2045 M2130 M2351 CH11730 A20-2AS-II M2121 CH11740 A20-4AS-II M2154 CH11978 A30-1BS-II M2360 CH12007 A30-1AS-II M2364 CH12015 A30-3AS-II M2365 CH12045 A30-5AS-II M4001 CH12130 CH12351 CH12381 A45-10AS DUALS* M2917 10-821414-4 CH12121 CH12154 CH12360 CH12364 CH12365 CH14001
C16-11BS-II M2381
BENDIX MAGNETOS
Engine/Magneto Cont. A-65/S4 C-85/S4 C-90/S4 0-200/S4 LYC. 0-100/S4 0-235/S4 0-290/S4 0-320/S4 0-360/S4 Cont. A-65/SF4 A-75/SF4 Lyc. 0-100/SF4 0-235/SF4 0-290/SF4 Cont. E-185/S6 E-225/S6 O-470/S6 C-145/S6 O-300/S6 Lyc. 0-540/S6 IO-540/S6 Franklin165/S6 Cont.C-125-SF6 Lyc.0-435/SF6 Part No. 12301-02 12301-05 12301-06 12301-05 12301-21 12301-21 12301-21 12301-22 12301-22 12302-02 12302-03 12302-20 12302-20 12302-20 12305-10 12305-11 12305-13 12305-09 12305-09 12305-22 12305-22 12305-41 12307-08 12307-23
SLICK MAGNETOS
Engine/Magneto VW (M2266) * Lyc 0-235 (M2363) 0-290 (M2363) 0-320,0-360 (M2363) Cont. 0-200 (1780) C-75 (1780) C-85 (1780) C-90 (1780) Part No. 12304-32 12304-33 12304-33 12304-33 12304-31 12304-31 12304-31 12304-31
EISEMANN MAGNETOS
Engine/Magneto Part No. Cont A65/LA-4 12303-04 A75/LA-4 12303-04 C-85/LA-4 12303-07 E-185/LA-6 12306-12 Franklin 150/LA-6 12306-40 *This harness only comes with 4-leads. ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA/PMA harness is mandatory or if for use with 3/4 spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.
* Core deposit of $125 required unless dual magneto accompanies order. **Call for prices on 8-cylinder harnesses or individual leads. Note: For 90 brass spark plug elbow fittings, add $60 to 4-cylinder prices, and $80 to 6-cylinder prices. All other Aero-Lite harnesses normally ship within 2 days.
302
IGNITION SYSTEMS
Of all the E-MAG innovations, the self-powering capability of the P Model is the most significant. It solves the largest single issue faced by all electronic ignitions - their need for an uninterruptible power supply. Power back-up strategies that a) compromise ignition effectiveness, b) solve only half the problem, or c) require additional maintenance are less than ideal. Next-Generation ignitions need a better solution. So what does a next-generation electrical back-up need to do? Above all, it has to be reliable. When its needed, it has to work - period. It should operate for as long as needed. Whether its the last 10 minutes of a Sunday pleasure flight, or youre crossing the Atlantic. It should be maintenance-free. Benign neglect should not prevent it from working. On the rare occasion its needed, it should automatically engage without operator intervention. A simple and convenient pre-flight check should confirm its working properly. This P model ignition has an internal three phase brushless alternator that produce enough power to sustain the ignition when the engine is turning 800 rpm, or more. If the aircraft buss voltage goes off-line, the ignition has an internal alternator. With this arrangement, dual electronic ignitions can be run clean. No back-up batteries and no back-up magnetos. The P Model Built-In Alternator adds no (zero) mechanical contact/wear parts to the system. Adds only a few ounces of weight. Requires no additional hardware to install. Will operate as long as the engine is turning Description P Model (P-MAG) Ignition - Same as the E model above, but has a built-in backup alternator. E-Mag P Model Ignition with Alternator 4C Continental - Ignition compatible with most 4 cylinder Lycoming and Continental O-200 engines. Specify Ignition type as follows: Lycoming (and like) engine P114-L4, Continental O-200 engines P114-C4 E-MAG Aircraft Harness Part No. 07-01292 07-01311 Price $1,195.00 $1,172.00 $127.50 $227.95 $114.00
CM WP ME HA AP LG EP CS IN
07-01293 E-MAG Aircraft Harness - Trim-to-fit harness kit. Aircraft Harness kits include with the (one ignition) coil end fittings, tool, and appear on forms as Air Packs. 07-01294 (two ignition) E-Mag Gear Adapter Kit C 200 07-01805
Auto style custom fit kits. Include low-resistance spiral wound lead wire, end fittings, and tool. Description Part No. E-MAG 4 Wire Kit (One Ignition) with Auto Pack 07-01396
Price $123.95
Auto harness pre-terminated with auto plug adapters. Auto style harness with terminals and boots installed on both ends. Same wire used in their custom trim-to-fit kit. E-MAG Auto Harness - 4 Wire Kit (One Ignition) with Auto Pack 07-01403 $129.50 E-MAG Auto Harness - 8 Wire Kit (Two Ignition) with Auto Pack 07-01404 $231.95 E-MAG Spark plug adapters - 4 pk. 08-06753 $57.50
EIS-1 KIT
EIS-2 KIT
EIS-3 KIT
EIS-4 KIT
Electroair Ignition Systems come complete with everything needed to install the EIS. Comprehensive installation procedure leaves little room for error when installing your system. STCd for most Lycoming 4 cylinder engines. For more information on these kits and STC model list, please visit: www. aircraftspruce.com EIS-1 KIT 4-cylinder Electronic Ignition System comes with: Coil Pack, Controller, Mag Timing Housing, MAP Sensor, spark plug wires, instruction manual. Specify engine make and model. EIS-2 KIT 6-cylinder Electronic Ignition System comes with: Coil Pack, Controller, Crankshaft Timing Wheel, MAP Sensor, spark plug wires, instruction manual. Specify engine make and model. Part No. Price EIS-3 KIT Subaru EJ-22 4-cylinder Electronic Ignition System comes with: Coil Pack, Controller, Subaru Timing Wheel Kit ( replaces COG pulley & factory pick-up ), and instruction manual. EIS-4 KIT Rotorway RW 152 4-cylinder Electronic Ignition System comes with: Coil Pack, Controller, Trigger Wheel Kit ( mounts on V-Belt Pulley), spark plug wires, and instruction manual. Part No. Price
EL AV TO PS BV
08-05954 $1,592.00
08-05956 $1,270.00
The EIS-41000 Electronic Ignition Kit is a fully STCd kit for most Lycoming 4cyl engines. Replacing one magneto with the EIS-41000 will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000 adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000 are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Kit includes: all the required parts to replace the direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming engines. (Please refer to the eligibility schedule to verify the system can be installed on your engine Note: engines are being added regularly). Features: 4cyl Electronic Ignition for most Lycoming Engines. 10-15% gain in fuel efficiency. Improved Horsepower. Smoother, low RPM operation. Timing adjusts with altitude (MAP) P/N 08-07272 ...................................................... $2,890.00
303
Electronic ignition systems for Lycoming engines have been around for awhile but this may be a better idea - you be the judge. The manufacturer has taken the core control system of the EFII fuel injection system and pared it down to the ignition components. This allows them to offer a sinlge mag replacement high energy ignition system for your aircraft. And what is unique about that you ask? Well, the EFII system uses a very high energy inductive coil pack to deliver several times the spark energy of the most popular competitor system for more complete combustion. Secondly, once you have installed one of their ignition systems, you have opened the door for an easy upgrade in the future to the full electronic fuel injection and ignition EFII system. You can start now with a single or dual mag replacement ignition that utilizes their billet Hall effect crank trigger and proven engine computer and simply add the rest of the EFII fuel injection kit in the future if you choose to do so. This easy migration path between systems can not be matched by any other ignition or fuel injection company. In The Box: Ignition computer, high energy coil pack with integral magneto block off plate, Billet Hall effect crank trigger (no case drilling required), high quality silicon spark plug wires, 4 ea., automotive Iridium spark plugs, 4 ea., spark plug adapters, 4 ea., MAP sensor, Tefzel plug and play wiring harness with environmentally sealed connectors. P/N 07-01850 ...............$1,200.00
Electronic ignition systems for Lycoming engines have been around for awhile but this may be a better idea - you be the judge. The manufacturer has taken the core control system of the EFII fuel injection system and pared it down to the ignition components. This allows them to offer a dual mag replacement high energy ignition system for your aircraft. And what is unique about that you ask? Well, the EFII system uses a very high energy inductive coil pack to deliver several times the spark energy of the most popular competitor system for more complete combustion. Secondly, once you have installed one of these ignition systems, you have opened the door for an easy upgrade in the future to the full electronic fuel injection and ignition EFII system. You can start now with a single or dual mag replacement ignition that utilizes their billet Hall effect crank trigger and proven engine computer and simply add the rest of the EFII fuel injection kit in the future if you choose to do so. This easy migration path between systems can not be matched by any other ignition or fuel injection company. In The Box: Ignition computer, high energy coil packs with integral magneto block off plate, Billet Hall effect crank trigger (no case drilling required), high quality silicon spark plug wires, 8 ea., automotive Iridium spark plugs, 8 ea., spark plug adapters, 8 ea., MAP sensor, Tefzel plug and play wiring harness with environmentally sealed connectors. P/N 07-01851 ...............$1,850.00
This Bus Manager is an important safety device for aircraft that have critical electronics that require a protected essential bus. This would include aircraft that are running electronic fuel injection, electronic ignition, electric fuel pumps, or critical instrumentation. Provides a triple redundant essential bus for all critical electronic equipment. This redundency is crucial for engines that rely on uninterupted +12V power to critical items. The end user no longer has to attempt to come up with a home brew bus system for their plane. The Bus Manager has been professionally designed and over-built to faithfully provide extreme reliability. P/N 07-01852 ............$540.00
BUS MANAGER
The Accessory Kit for the Bus Manager consists of all the parts necessary to setup a Bus Manager based electrical distribution system for experimental aircraft. P/N 07-01853 ............$145.00
The EFII Boost Pump Module (BPM) brings a new level of installation simplicity and functionality to the fuel system of your aircraft equipped with Bendix, AFP or Precision Airmotive type mechanical fuel injection. The BPM reduces a time consuming and frustrating plumbing job to a simple and clean, easy to set up installation. It is used to supply a steady source of 30PSI fuel to your engine during take-off, landing, priming, or emergency situations. The BPM has integral back flow prevention and pressure regulation valving. P/N 07-01854 ............$649.00
304
LIGHTSPEED IGNITION
Light Speed Engineering, LLC (LSE) is a pioneer in the design and production of ignition systems for experimental aircraft. 22 years of research and development have been invested in producing the PLASMA CDI (Capacitive Discharge Ignition) system product line. LSEs PLASMA CD systems are the ideal replacement for yesterdays magneto technology. You can replace one mag with a PLASMA CDI or, for maximum performance, replace both magnetos with these state of the art systems. The Plasma CDI is a solid-state, high performance ignition system intended for todays home built aircraft. Light Speed Engineering currently offers two Capacitive Discharge Ignition Systems: the PLASMA II PLUS and the PLASMA III. Standard Plasma CDI kits include: direct crank sensor assembly, high tension leads, harness, spark plugs, spark plug adapters, and ignition coils with mounting bracket. One or two systems can be used. The Plasma II is Light Speed Engineerings basic electronic ignition system for aircraft. It is a lightweight, high-energy capacitor discharge system containing all of the essential Plasma CDI features. Its smaller size and lighter weight sets it apart from any other ignition source. Like all LSE ignition systems it features automatic ignition advance based on engine load and RPM, auto retard for starting and a standard pulse tachometer output. The Plasma II was designed to provide a high tech ignition source at the cost of magnetos.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Unshielded 7MM ignition cable consists of tinned conductor, rubber insulation, reinforced glass braid and Hypalon jacket that resists sun, weather, heat, chemicals and oxidation by ozone. Temperature range -65 to 250F. P/N 07-03700 .......$1.27 Ft.
Light Speed Engineering has introduced a new ignition system to its line of products. The new Plasma III Capacitor Discharge System is the latest high performance ignition for all 4-cyl and 6-cyl aircraft engines. Its long duration spark and optimized timing curve makes more horsepower and improves fuel efficiency- at all altitudes. Other benefits include quick starts, reduced maintenance, light weight, lower EGTs and up to 20% more range. As with all LSE ignitions, RPM and manifold pressure inputs are used for our proprietary timing curves. The Plasma III is also capable of displaying the current timing advance, manifold pressure and rpm on an optional lightweight LCD display. The Plasma III can easily replace one or both magnetos, making your engine run better under all conditions.
M2376
Seal Type Part No. 5mm Wire Seal One-Wire 526 5mm Wire Seal Two-Wire 375 5mm Wire Seal Three-Wire 376 5mm Wire Seal Slick 3-Wire M2376 5mm Wire Seal Slick 2-Wire M2375 5mm Wire clamp Slick 2-Wire M2755
P/N M2755
The Buzz Aero Model AC2003 cover is made to fit Lycoming straight valve cylinders. Available in red, white, blue or black anodizing. Specs: Wt: 9oz; Machined from billet aluminum; Nickel chrome plated stainless steel socket head cap screws supplied with kit; Set of gaskets supplied with each kit. AC2003 Applications: Lyc. 0-235, 0-290, 0, l0, Ll0-320, 0-340, 0- 360-A, B, C, D; l0-360-B; H0-360-A, B; Hl0-360-B, V0, lV0-360; 0- 540-A, B, E, F, G,
l0-540-C, D, J, N, R. Also Available by Special Order: AC2004 for Engines: l0-360-A, C, D; Al0-360-A, B; H0-360-A, C, D, Tl0-360-A; Ll0-360-C1E6; V0, G0-435; G0-480; l0, V0, TVl0-540; l0- 720, TV0-435. Rocker Rocker Rocker Rocker Rocker Rocker Rocker Rocker Description Part No. Cover 4 Cyl. Kit Red 08-00806-1 Cover 4 Cyl. Kit White 08-00806-2 Cover 4 Cyl. Kit Blue 08-00806-3 Cover 4 Cyl. Kit Black 08-00806-4 Cover 6 Cyl. Kit Red 08-00807-1 Cover 6 Cyl. Kit White 08-00807-2 Cover 6 Cyl. Kit Blue 08-00807-3 Cover 6 Cyl. Kit Black 08-00807-4 Call for Pricing! Call Call Call Call Call Call Call Call Price for price for price for price for price for price for price for price for price
305
Massive Electrode
5/8-24 thread 3/4- 20 thread
Fine-Wire Electrode
5/8-24 thread 3/4- 20 thread
UREB37E UREM37BY UREM38E UREM40E URHB32E URHB37E URHM38E URHM40E UREB36S UREM38S URHB32S URHB36S URHM38S
WP ME HA AP LG EP CS IN EL AV TO PS BV
x x x
x x x x x x x x x
x x x x x x x x x x x x x x x
x x x x x
x x
x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x
x x x x x
x x
x x x x x x x x x x x
x x x x x
x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x
x x x x
x x x x
x x x x x
x x x
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x
O-320: H1AD, H1BD, H2AD, H2BD, H3AD, H3BD O-320: B2B O-340: A1A, A2A, B1A O-360: A1A-nd, A1A-wd, A1AD, A1C, A1D, A1F, A1F6, A1F6D, A1G, A1G6, A1G6D, A1H, A1H6, A1LD, A1P, A2A, A2D, A2E, A2F, A2G, A2H, A3A, A3AD, A3D, A4A, A4AD, A4D, A4G, A4J, A4K, A4M, A4N, A4P, A5AD, B1A, B1B, B2A, B2B, B2C, C1A, C1C, C1E, C1F, C1G, C2A, C2B, C2C, C2D, C2E, C4F, C4P, D1A, D2A, D2B, F1A6 O-360: E1A6D, E1AD, E1BD, E2AD, E2BD, G1A6, J2A O-435: A, A2, C2 O-435: C, C1, K, K1 O-435: B O-435: 1/2 reach cyl., 25 O-540: L3C5D O-540: A1A, A1A5, A1B5, A1C5, A1D, A1D5, A2B, A3D5, A4A5, A4B5, A4C5, A4D5, B1A5, B1B5, B1D5, B2A5, B2B5, B2B5-wd, B2C5, B2C5-wd, B4A5, B4B5, B4B5-wd, E4A5, E4B5, E4B5-wd, E4C5, F1A5, F1B5, G1A5, G1A5-wd, G2A5, G2A5-wd, H1A5, H1A5D, H1B5D, H2A5, H2A5D, H2B5D, J1A5D, J1B5D, J1C5D, J1D5D, J2A5D, J2B5D, J2C5D, J2D5D, J3A5, J3A5D, J3C5D O-540: D1A5 R-680: 2, 5, 6, B2, B4, B4B, B4C, B4D, B4E, B5, B6, D5, D6, E1, E2, E3, E3A, E3B R-680: 4 TIGO-541: B1A, C1A, D1A, D1B, E1A, G1AD TIO-360: A1A, A1B, A3B6, C1A6D TIO-540: A1A, A1B, A1C, A2A, A2B, A2C, C1A, E1A, F2BD, G1A, H1A, J2B, J2BD, K1AD, N2BD, R2AD, S1AD, T2AD, V2AD TIO-540: AA1AD, AB1AD, AB1BD, AE2A, AF1A, AF1B, AG1A, AH1A, AJ1A, W2A TIO-541: A1A, E1A4, E1B4, E1C4, E1D4 TIVO-540: A2A TO-360: C1A6D, E1A6D, F1A6D TO-360: A1A6D TVO-435: A1A, C1A, D1A, E1A, F1A, G1A, G1B TVO-435: B1B, D1B TVO-435: 13/16 reach cyl. TVO-435: 1/2 reach cyl. VO-360: A1A, A1B, B1A VO-435: 13/16 reach cyl. VO-435: 1/2 reach cyl. VO-540: A1A, A2A, B1A, B1B, B1B3, B1C, B1D, B1E, B1F, B1H3, B2A, B2C, B2D, B2E, B2G, C1A, C1B, C1C3, C2A, C2B, C2C
x x x x x
x x x
x x x x
x x x x
x x
x x x x x
x x
x x x x x
x x
x x
x x
Not a complete list. To find the right Tempest Aviation Spark Plugs for your engine, see our complete application guide & engine cross reference at http://tempestplus.com
306
UREB37E UREM37BY UREM38E UREM40E URHB32E URHB37E URHM38E URHM40E UREB36S UREM38S URHB32S URHB36S URHM38S
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
CM
5/8-24 thread
3/4- 20 thread
All Champion Aviation Spark Plugs are identified by type designations selected by virtue of the plug design as applied to the following Spark Plug Number and Symbol Chart. The symbol is composed of a rating position number together with prefix & suffix numbers to indicate major plug design characteristics.
CM WP ME
1. RESISTOR None No Resistor R Mil-Spec. Resistor - Erosion protection 2. BARREL STYLE None Unshielded E Shielded 5/8-24 Thread H Shielded 3/4-20 Thread (All Weather Plug) 3. MOUNTING THREADREACHHEX SIZE
B - 18mm J - 14mm U - 18mm 13/16/2.06cm 7/8/2.22cm M 18mm 1/2/1.27cm 3/8/0.95cm 13/16/2.06cm L 14mm 1/2/1.27cm 1-1/8/2.85cm 13/16/2.06cm 7/8/2.22cm 13/16/2.06cm
R Push-wire90 to Center
HA AP LG
Note: The spark plugs listed are not for aircraft application DCPR7E Size 10mm 12 mm 12 mm 12 12 14 14 mm mm mm mm Description CR5HSB DCPR7E DCPR8E (Removable Terminal Nut) DCPR8E (Solid Terminal Nut) DR8EA BR8EIX B8ES (Solid Terminal Nut) B8ES (Removable Terminal Nut) BR8ES B7ES B9ES BR7ES BR9ES BR7EIX BR9EIX DP9EA-9 IK24 Part No. Price 08-06263 $2.25 08-00504 $3.60 08-01228 $3.55 08-07044 08-00693 08-00650 08-00730 $2.95 $2.40 $8.75 $2.35
EP CS IN EL AV TO PS BV
BR8EIX
14 mm 14 mm 14 mm 14 mm 14 mm 14 mm 14 mm 14 mm 12mm 14mm
08-07075 $2.45 08-00736 08-07039 08-07040 08-07041 08-07042 08-07045 08-07046 15-05219 15-05204 $2.40 $1.94 $2.15 $2.25 $2.40 $8.25 $7.95 $2.90 $12.95
* Shielded barrel thread size. Check barrel size - 5/8x24 or 3/4x20 threads before ordering and select proper plug number, See page 236 for Sparkplug Application Table. ** The Iridium S sparkplugs replace the Platinum and W Iridium types. Increased bore diameter improves scavenging action. Greater clearance volume can accept more combustion deposits. Single Iridium electrode offers greater resistance to lead attack. Easy to clean Easy to gap
Apply sparingly to second and third threads. Do not contact electrodes as it could short out the plug. Do not apply to shielding barrel threads. Unbreakable 4oz. bottle with applicator brush top.........................................P/N 2612 .................. $8.50
NOTE: Spark plugs are shipped in factory sealed plastic cases. Opened spark plug cases make the spark plugs non-returnable. Please do not open any spark plug until you are sure you have received the correct spark plugs for your application.
T-556 Spark Plug Thread Lubricant and Anti-Seize Compound helps to prevent galling and lubricates threads during installation. ................................................... P/N 12-00709 ........ $7.90
New surplus 18MM longreach, shielded, 3/4-20 barrel. FAA approved for Continental IO-470, GIO-470, TSIO-470, IO-520 & GTSIO-520. Not for 0-470, which uses short reach plugs. P/N 08-03699 ....... $9.35 ea
Made of solid copper to current aircraft standards. Available in 14 MM and 18 MM sizes. AN4027-2, 14MM ..................... P/N 07-01261........$0.59 ea AN4027-1, 18MM ..................... P/N 07-00877........$0.36 ea
SEE TOOL SECTION FOR FULL LINE OF CHAMPION SPARK PLUG TOOLS
These plugs are used to prevent rust and corrosion in engines while in storage. Contain silica gel which turns from blue to pink when moisture is absorbed. Reusable & refillable. The pink silica gel may be reactivated (after removing from reservoir) by heating for 16 hours at 250F. AN4062-1 (18MM) ....................... $6.90 ea SILICA GEL. Indicating type, for refilling plugs. 1/4 Lb. Bag......... P/N 07-00731 ........ $4.90 1 Lb. Can ........... P/N 07-03400 ...... $16.75
The new type folded steel sparkplug gaskets provide better sparkplug retention with no adverse effect on heat transfer. Endorsed by FAA. These gaskets are not to be reused. 18mm Gaskets ......................... P/N M677 .........$1.87 ea
307
REGULATORS - ALTERNATORS
HARTZELL (ELECTRODELTA) VOLTAGE REGULATORS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Mfg P/N VR286 VR500-0101 VR500-0102 VR515F VR515GA VR580 VR600 VR801 VR371 VR415F VSF7203A VR382 VR392 VR2000-28-2 VSF7403A VR200A VR300-14-20 VR300-14-35 VR300-14-50 VR300-28-25 VR300-28-40 Mfg. P/N VR300-14P-50 VR418-5 VR300-14-25 VR711 VR417-2 VR300-28-50 VR-300-14-40 VR300-14P-35 VR710 VR515G-2 Mfg. P/N GPM-001 OS60 OS100-0101 OS100-0102 OS200-0101 OS75-14 OS75-28 Mfg. P/N PT001
Description Replacement for 28V Voltage Regulator Cessna 9910126-1,-2,-3 27.7V Voltage Regulator Cessna C11004-0101, C611002-0102, -0105 28.8V Voltage Regulator Cessna C611004-0102 28V Voltage Regulator Cessna C611501-0102, C611005-0101 28V Voltage Regulator Cessna C611005-0103,-0102 28V Voltage Regulator Cessna C611008-0101 14V Voltage Regulator Cessna C611001-0101, -0102, -0201 28V Alternator Control Cessna C611007-0101 14V Voltage Regulator Zeftronic R15V0L 14V Voltage Regulator Zeftronic R15300 12V Voltage Regulator Zeftronic R1510N 28V Voltage Regulator Lamar B-00382-2 14V Voltage Regulator Lamar B-00392-1 28V Voltage Regulator N/A 24V Voltage Regulator Voltage Regulator VSF7403A 14V Voltage Regulator Piper 484121 14V Voltage Regulator Delco-Remy 1118736, E,1118904, 1119226 14V Voltage Regulator Delco-Remy 1118704 14V Voltage Regulator Delco-Remy 1118713, 1118884, 1119224C 28V Voltage Regulator Delco-Remy 1118951, 1118975, 1119218C 28V Voltage Regulator Delco-Remy 1119237,1119656 Hartzell (Electrodelta) Voltage Regulators (Factory Overhauled) Description Replacement for 14V Voltage Regulator Cessna 0413205-11 14V Voltage Regulators Zeftronic R15400 14V Voltage Regulator Zeftronic R1510L 14V Voltage Regulator Delco 1118384 14V Voltage Regulator Lamar B-00288-1 14V Voltage Regulator Christen 61235 28V Voltage Regulator N/A 14V Voltage Regulator Not PMAd 14V Voltage Regulator Cessna 0413205-10, Delco Remy 1119145E 14V Voltage Regulator Piper 584340, Prestolite FVR4002, 4016, 4024, Wico X18150 28V Voltage Regulator Schweitzer Aircraft Corp 269A4985 Hartzell (Electrodelta) Voltage Sensors & Monitors (Factory New) Description Replacement for 28V Ground Power Motor Cessna C593005-0101 14V Overvoltage Sensor Cessna C5930001-0101 28V Overvoltage Sensor Cessna C593003-0101 28V Overvoltage Sensor Cessna C593003-0102 28V Overvoltage Sensor Cessna C593004-0101 14V Overvoltage Sensor Zeftronic V1510A 28V Overvoltage Sensor Zeftronic V2510A Accessories Description Application Adapter Cable For use w/ VR415-F ONLY
Part Number 07-00920 07-00912 07-00913 07-00914 07-00915 07-00916 07-00884 07-00919 07-00718 07-00910 07-00921 07-00908 07-00909 07-00895 07-00922 07-00896 07-00899 07-00901 07-00902 07-00905 07-00906 Part Number 07-00904 07-00881 07-00623 07-00900 07-00918 07-00911 07-00907 07-01520 07-01521 07-01522 07-01108 Part Number 07-01275 07-00890 07-00887 07-00888 07-00889 07-00891 07-00892 Part Number 07-00893
Price $196.00 $109.00 $109.00 $164.00 $179.50 $189.00 $136.00 $323.00 $189.00 $219.85 $249.00 $259.00 $288.00 $399.00 $247.00 $109.00 $146.00 $146.00 $146.00 $246.00 $246.00 Price $255.95 $187.95 $123.95 $149.95 $226.95 $195.95 $254.95 $163.95 $286.95 $164.95 $168.95 Price $281.95 $92.75 $93.80 $96.25 $149.00 $124.85 $142.00 Price $96.75
OVERHAULED COMPONENTS
Alternators, generators, and starters which are remanufactured for installation in general aviation aircraft. Fully FAA approved.
EXPERIMENTAL ALTERNATORS
Part No. ES-6012 ES-6024 ES-6212 ES-6224 ES-7024 ES-10024 1100715R 1100716R 1100717R 1100718R 1100723R 1100747R 1100753R 1100792R Volt/Amp 14V60A 28V60A 13.8V60A 28V60A 28V70A 28V100A 12V70A 12V52A 12V70A 24V50A 24V50A 24V50A 24V65A 24V65A Price CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL
AEROTECH GENERATORS
Part No. DEL1101876 DEL1101877 DEL1101878 DEL1101879 DEL1101880 DEL1101881 DEL1101882 DEL1101887 DEL1101888 DEL1101890 DEL1101892 DEL1101897 DEL1101898 DEL1101899 DEL1101900 DEL1101901 DEL1101904 DEL1101905 DEL1101906 DEL1101908 DEL1101909 DEL1101910 Volt/Amp 12V12A 12V26A 12V13A 12V25A 12V26A 12V13A 12V26A 12V35A 12V50A 12V20A 12V35A 12V35A 12V35A 12V20A 12V35A 24V26A 24V25A 24V25A 24V25A 12V50A 12V50A 12V20A Price $311.95 $314.95 $312.50 $249.95 $249.95 $249.95 $249.95 $312.95 $226.95 $237.95 $249.95 $249.95 $237.95 $237.95 $248.95 $248.95 $250.95 $250.95 $250.95 CALL $319.95 $249.95
DELCO ALTERNATORS
Part No. DEL1101911 DEL1101912 DEL1101913 DEL1101914 DEL1101915 DEL1101917 DEL1101918 DEL1101923 DEL1105052 DEL1105053 DEL1105054 DEL1105055 DEL1105056 DEL1105057
Volt/Amp 24V25A 12V50A 12V35A 12V35A 12V50A 12V35A 12V35A 12V50A 24V40A 24V40A 24V50A 24V50A 24V40A 24V50A
Price $250.95 $319.95 $250.95 $248.95 $237.95 $248.95 $248.95 $250.95 CALL CALL $289.95 $397.95 $273.95 $282.95
DELCO STARTERS
Part No. Volt/Amp Price DEL1108234 24V $314.95 1108249R 12V CALL DEL1109471 12V $314.95 1109511R 12V CALL 1109517R 24V CALL 1109511R 12V CALL 1109518R 24V CALL 1109511R 12V CALL
Part No. Volt/Amp Price 1109511R 12V CALL 1109514R 12V CALL 1109651R 12V CALL DEL1109652 12V $299.00 1109656R 12V CALL 1109657R 12V CALL 1109660R 12V CALL 1109662R 24V CALL 1109678R 12V CALL 1109689R 12V CALL 1109687R 24V CALL 1109677R 12V CALL 1109678R 12V CALL 1109519R 12V CALL 1109518R 24V CALL 1109678R 12V CALL Minimum Core Charge on Delco Alt. and Starters $200.00 *Drive not included (DEL 1971890). For price see listing for drives. **Drive not included (DEL 1940969). For price see listing for drives.
Lamar Voltage Regulator DGR6-1 fits Cessna 150 thru Cessna 210 series aircraft. DGR6-1 is the PMA replacement for DGR6, C6110010101, C611001-0102, C611001-0201, and VR600. Manufactured in the USA. P/N 07-01897 .....................$148.95
Lamar Alternator Control DGR3-1 fits Cessna 150 thru Cessna 210 series aircraft. DGR3-1 is the PMA replacement for DGR3, C611005-0103, C611501-0102, and VR15F. Manufactured in the USA. P/N 07-01896 .....................$199.95
308
CM WP ME HA AP LG EP CS
LS
Aircraft Spruce carries the full line of alternators, and starters which are remanufactured by Hartzell for installation in general aviation aircraft. Fully FAA approved. All prices shown are exchange prices. Core charges are billed when unit is shipped. Core credit is issued upon return of acceptable like model core to Aircraft Spruce West in Corona, CA. NOTE: If core is not in stock at factory, customer must send core to Aircraft Spruce at time of order to have the core overhauled.
IN EL AV TO PS BV
309
CM
AL Series
ES4020 Series
ES4000 Series
As the OEM, Hartzell offers factory new alternators engineered specifically to meet the challenges and increased demands of todays aircraft electrical systems. Each unit is aviation designed & developed, no automotive parts used. For decades our alternators have been powering Lycoming/Continental engines with unmatched performance and reliability. No Core charges.
WP ME HA AP LG EP CS IN EL AV TO PS BV
Lighter, Tougher, and Proven! Introducing the brand new ALV-9610. The ALV9610 alternator is a direct replacement for gear driven heavyweight alternators on the Continental 520 & 550 engines.
Introducing the brand new ES-10024 28volt / 100amp aircraft alternator. The ES10024 alternator is a direct replacement for TCM part number 656802.
Weighing under 13 lbs., the ALV-9610 is up to 9 lbs. lighter than current heavyweight options. The ALV-9610 is a field proven design that has been in use for over 5 years with thousands of alternators operating on the world's top selling aircraft. FAA/PMA Approved. Features: Up to 9.6 lbs. weight savings (per engine) OEM Direct Replacement More power at engine cruise Built in noise cancellation Rugged design for extreme conditions More economical than overhauled units Two year warranty Specifications: 28 Volt / 100 Amp Prestolite Style Replaces TCM part numbers: 642056, .. 646491, 646842, 649304, as well as ALV- . 9510. P/N 08-07442.......... $688.00
Hartzell Lightweight Alternator ES7024-14, for experimental use. 28 Volt, 70 Amps. Weight: 7 lbs. Replaces TCM part number 657199. Features: All aircraft quality parts, no automotive parts High altitude brushes High speed bearings High temperature varnish on rotor and stator No modifications necessary for Retro-fit into any existing Ford style applications Two year warranty P/N 08-07444........... $525.00
The ES-10024 is a field proven design that has been in use for over 5 years with thousands of alternators operating on the worlds top selling aircraft. Prestolite Style - FAA/PMA Approved. Lightweight, cost effective, 2 yr. warranty. Features: Up to 9.6 lbs. weight savings (per engine) OEM Direct Replacement More power at engine cruise Built in noise cancellation Rugged design for extreme conditions More economical than overhauled units Two year warranty Specifications 28 Volt / 100 Amp Prestolite Style Replaces TCM part number 656802 P/N 08-07443........... $844.00
310
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Prestolite: VSF7201, 2, 2S, 3, 3A, 3S, 4 FAA-STC $201.95 Electrodelta: VSF7203A TCM: 649684-1 Piper: FAA-PMA 550-383
FAA-STC Zeftronics: R1510N (ACU), Plus V1510A $267.95 FAA-PMA (OVR) Piper: 450-392, 484-121, 66804-03, 756-055, 484-088 Beech: 169-380063 Wico: X16300B, X17990. Lamar: B00267-1, 2, B00331-1, 2. 07-00623 FAA-PMA $123.95 Delco Remy: 9000590, 1116393, 1116398 Electrodelta: VR200, A Commander: 1816110 Prestolite: FVR4004, 4224, 4011 RBM: 87-87102-21 Lycoming: LA-11357, 12747 Piper: 557-337 Lamar: B00371-1,-8,-14 07-00629 FAA-PMA $184.95 Electrodelta: VR371 Zeftronics: R1510L (ACU), Plus V1510A (OVR) Mooney: 800270-505, 880016-503 Electrodelta: VR415F Lamar: DGR1-1
Mooney: 880016-501 Beech: 35-380093-1,2,3 07-00626 FAA-PMA $274.95 Electrodelta: VR414, B00403-1 ; EM2073-1, 2 Oeco: 20053, 20065, 20137, 20437, 20082 Cessna: C611004-0101, C611002-0102, -0105 07-00631 FAA-PMA $112.95 Ford: C8FF/ C6FF-10316-A TCM: 636147 Electrodelta: VR500-0101 07-00632 FAA-PMA $115.95 07-00634 FAA-PMA $250.95 Cessna: C611004-0102 Electrodelta: VR5000102 Delco Remy: 9000591 Lycoming: 74292 TMC: 631656
Cessna: C611005-0103, -0101, -0102 Electrodelta: VR515F,G, GA Lamar: DGR3 Prestolite: VSF7403A, 3S, 4Piper: 550-381 Lycoming: LW10179, 77347
Prestolite: VSF7403A,3S,4. Piper: 550-381. 07-00636 FAA-STC $298.95 Lyc: LW10179, 77347 Zeftronics: R2510N + V2510A 07-00637 FAA-STC $89.50 Cessna: C593001-0101 Lamar: DG01 Electrodelta: OS60. Electromech: EM235
07-00638
Piper: 450-397, 484-183, 550-380, 450-393 Beech: 138-1 Wico: X-17621 Lamar: B00289FAA-STC $122.95 2, B00339-1 Electrodelta: OS75-14 DelcoFAA-PMA Remy: 1115831 Prestolite: FOC-4002B FAA-STC $94.85 FAA-PMA Cessna: C593003-0101, -0102 Electrodelta: OS100-0101 Electromech: EM233 Lamar: DG02-28 Other P/n: 138-3
07-00639
Piper: 484-182, 550-382, 584-043 Prestolite: 07-00640 FAA-STC $128.95 FOC4003A, B. Lycoming: 74804, 78060 Wico: X17634, X17620 Delco Remy: 1115832 07-00617 FAA-PMA $139.95 07-00618 FAA-PMA $137.85 07-00619 FAA-PMA $139.95 Delco: 1118736, 1118904, 1119226. VR30014-20. Cessna: 0413025-4, 5, 12 Delco: 1118704, 1119220, 1118-704, 1118892. VR300-14-35, 450-390. Cessna: 0413025-6, 8, 10
Delco: 1118884, 1118713, 1119224, Electrodelta: VR300-14-50. Cessna: 0413025-7, 9, 11 07-01367 FAA-STC $228.95 1119656 ,VR300-28-50. Cessna: 0850460-9
FOR A COMPLETE LISTING OF ALL PRODUCTS AND AIRCRAFT ELIGIBILITY LIST, VISIT WWW.AIRCRAFTSPRUCE.COM.
311
AL12-F60 AL24-F60 AL12-F60C AL24-F60C AL24-FS60 AL12-P70 AL24-P70 AL12-70 AL24-70 C28-150
07-00998 $482.00 07-00999 $484.00 07-01256 $483.00 07-01257 $488.00 07-01491 $659.00 07-01001 $488.00 07-01002 $499.00 07-01258 $554.00 07-01259 $542.00 07-01838 $1,247.00 Model # AL24-P70 Model # AL24-70* Model # AL12-P70 AL12-F60 AL24-P70 Model # AL12-P70 Model # AL24-P70 AL24-P70 Model # AL12-P70 AL12-P70 AL12-70 AL12-P70 AL24-P70 AL12-P70 AL12-C60 AL12-C60 AL12-C60 Model # AL24-P70
Twin Commander Aircraft Corporation 500-S Diamond Aircraft Industries GmbH DA-40 Grumman (Gulfstream, Tiger) AA-1, AA-1A, AA-1B, AA-1C AA-5, AA-5A, AA-5B, AG-5B, GA-7 AG-5B Mooney M20C, M20E, M20F, M20G, M20J Mooney (cont.) M20J M20M (Single alternator installations only) Piper (Without Airconditioning) PA-44-180, PA-44-180T PA-28-151, PA-32R-301 (SP), PA-32-301T, PA-32R, 301(HP), PA-32R-301T (SP), PA-32-301, PA-34-200, PA-38-112 PA-24-260 PA-23-235, PA-23-250 PA-23-235, PA-23-250 PA-44-180, PA-44-180T PA-28-140, PA-28-150, PA-28-151, PA-28-160, PA-28180, PA-28-235, PA-28R-180, PA-28R-200, PA-32-260, PA-32-300, PA-32R-300 PA-28-140, PA-28-151, PA-28-161, PA-28-180, PA-28235, PA-28R-200, PA-32-300, PA-32R-300 PA-28-151, PA-28-161, PA-28-181, PA-28-236, PA-28R-201, PA-28RT-201, PA-32-300, PA-32R-300, PA-32RT-300, PA-32RT-300T Vulcanair, S.P.A P68, P68B, P68C, P68C-TC, P68 OBSERVER, P68TC OBSERVER, P68 OBSERVER 2
OEM Part # 78314 OEM Part # ALU-8421LS OEM Part # ALE-6420 / ALY6420 LW-14310 DOFF-10300J ALU8421LS OEM Part # ALY-8420 / ALX8403 OEM Part # ALU6421LS ES-4009LS OEM Part # 751 346 551-984 ALX8403 ALX8403 ALU-8403 ALX8421LS 69670-00 (60 amp) 69670-03 (60 amp) 69670-04 (60 amp) OEM Part # ALU-8421LS
C611501-0102 0750217-1 1570213-6 C611503-0102 C611503-0102 1570213-7 9910591-5 9910591-11 OEM Part # LW14316
For Lycoming engines 235, 320, 360, 540, 720 and Superior engines O-360, IO-360, Plane-Power alternators AL12-P70, AL12-70*, and AL24-70* replace Lycoming and Superior certified 70amp alternators: LW14300, LW14302, LW14308, LW14310, LW14316, LW14319, LW14322, LW14324. *Comes with all new Plane-Power mounting brackets and hardware. The C28-150 is PMA FAA eligible on most Continental 520 and 550 Series engines with front mounted gear driven alternators. This Spectacular alternator in addition to providing a continuous 150A at X RPM will deliver 60A at 1000 RPM and weighing only 12.6 lbs! Also available without debris shield sold as model C28-150S.
Unlike automotive alternators, all Plane-Power Experimental Alternators are specifically engineered for Airplane Engines and have Dual Internal Fans designed for Airplane Engine Rotation the same as our Certified Alternators. 2 year warranty,
The AL12-EI60 kit comes with an internally regulated ultra compact lightweight AIRCRAFT alternator (6.9 lbs.) with an exclusive internal crowbar over-voltage protection circuit. The alternator is fully pilot controllable through unique internal wiring. The dual internal fans are designed for aircraft engine rotation for maximum cooling. The AL12-EI60 kit includes the tension arm, mounting brackets, required AN hardware, and V-Belt for Superior and most Lycoming* engines. 10 lb. 70amp also available. Also available 70 amp version only 2 additional lbs. The AL12-EI60-L , Plane Powers 60A LSA alternator which must be installed in combination with Sky-Tec LSA starter, provides the industrys lightest charging/starting package at 13.2 lbs. for Lycomings O-233, O-235, O-290, O-320 engines. Sky-tec starter to be purchased separately. Fits engines with 122 tooth ring gear and case mount engines. The EX14-50 kit is an internally regulated alternator kit for Small Block Continental Engines. The alternator (6.9 lbs.) includes an exclusive internal crowbar over-voltage protection circuit and is fully pilot controllable through unique internal wiring. The alternator includes dual internal fans designed for aircraft engine rotation. The kit also includes a pre-wired enable/field plug. The EX14-50 kit fits C75, C85, C90, C125, C145, E165, E185, E225, IO-240, O-200 and O-300. The FS1-14 Fly Safe back up alternator, internally regulated (13.6 volt +-0.3) with built-in overvoltage protection. Designed for use in experimental aircraft. FS1-14. Features a 30A continuous output, precision internal voltage regulator, fail-safe Over Voltage Protection, Shear Coupling Assembly, 6lbs installed weight, higher level of safety. 2-Year Limited Warranty. Weight: 6 Pounds. 12 volt/30 amp. Also availbale as a primary unit sold as model FS1-14B. Model Output Voltage Part No. Price Model Output Voltage Part No. Price AL12-EE70/C (Case Mount) 70 12 07-01005-1 $518.00 AL12-EI60/B (Boss Mount) 60 12 07-01313 $439.00 AL24-EE70/C (Case Mount) 70 24 07-01006-1 $530.00 AL12-EI60/C (Case Mount) 60 12 07-01313-1 $439.00 EX14-50 50 12 07-01268 $598.00 AL12-EI70/B (Boss Mount) 70 12 07-01414 $439.00 AL12-EI60-L 60 12 07-01839 $455.00 AL12-EI70/C (Case Mount) 70 12 07-01414-1 $439.00 FS1-14 Fly Safe 30 12 07-01857 $698.00 AL12-EE70/B (Boss Mount) 70 12 07-01005 $518.00 FS1-14B 30 14.2 07-01883 $700.00 AL24-EE70/B (Boss Mount) 70 24 07-01006 $530.00
312
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
BELT DRIVEN - Plane-Power Belt Driven Generator to Alterantor Conversion Kits include hardware and brackets to replace
your existing generator and regulator. Plane-Power STC Belt Driven Generator Conversions allow for increasing the size of the output wire and circuit breaker to allow for a maximum of 70 amps of output. All Plane-Power alternators feature dual internal fans specially designed for aircraft engine rotation to maximize cooling. Models available for both 12 and 24 volt as well as for both Lycoming and Continental installations.
Model SAL12-70 SAL12-70C TAL12-70 Output 70 (max) 70 (max) 70 (max) Voltage 12 12 12 Part No. 07-01301 07-01299 07-01302 Price $718.00 $783.00 $1,464.00 Model TAL24-70 TAL24-70C Output 70 (max) 70 (max) Voltage 24 24 Part No. 07-01304 07-01303 Price $1,556.00 $1,894.00
GEAR DRIVEN - Plane-Power Gear Driven Generator to Alterantor Conversion Kits replace your existing generator with an alternator which will provide higher output at lower rpm and allow for increasing the size of the output wire and circuit breaker to allow for a maximum of 50 amps of output. The ER14-50 uses your existing gear assembly. The entire gear assembly (ER14GR) may be purchased separately. Some older generators have larger diameter (5/8) shafts and require the gear support kit (G-Pack). Please call for details. The ER14-50 weighs 6.9 lbs Model Output Voltage Part No. Price ER14-50 50 (max) 12 07-01321 $714.00 and comes with a pre-wired enable plug, 50 amp gear driven Accessories alternator, alternator inoperative lamp, Seals and R1224B PowGear Drive designed for use with the ER14-50 07-01348 $90.00 er-Flex voltage regulator.
Plane-Power Power-Flex Voltage Regulators are FAA-PMA Approved. Available for most certified aircraft. Solid-state voltage regulators with over-voltage protection, field short (over current) protection, and reverse battery protection. PlanePower Power-Flex voltage regulators also support precision load sharing for twin applications and an alternator inoperative lamp. Power-Flex voltage regulators are designed to be setup in the field for 12 or 24 volt operation by a simple placement of the two internal jumpers. For smaller mounting placement on the R1224, installation aid 12-1021 may be used.
Description Replaces many Ford, Electrodelta, Prestolite, Interav, Wico, and FVR voltage regulators. Replaces voltage regulators on twin Cessnas, Beechcraft, and Vulcanair . Voltage 12 or 24 12 or 24 Part No. 07-01305 07-01306
R1224
Model R1224 R1224B
R1224B
Price $185.95 $185.95
Required for use with the existing drive gear when the generator shaft is over 0.5" in diameter. Uses existing gear from replaced generator.
313
B & C ALTERNATORS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The model L40 is a belt driven 40 amp 14 volt alternator system for Lycoming engines including alternator assembly, mounting hardware, and belt, ready to install. The alternator weighs 6.1 lbs. and measures 3.9 in diameter and 5.6 long. The model L40 alternator was specifically designed to meet the rigorous demands of todays weight sensitive homebuilt designs and has undergone extensive in-flight service testing. This system incorporates the latest state-of-the-art advances in solid state electronic power management as well as incorporating a factory new, modern lightweight alternator. Applicable to Lycoming 118 H.P. through the 300 H.P. engines. L40 Boss Mount P/N 07-06815 .........$424.00 Note On Models L40 & L60 Alternators, order as follows: L40 Case Mount (Narrow Deck Bracket) P/N 07-06810 .........$518.00 L40 requires voltage regulator see below Model L40 and L60 alternators require external regulators use: P/N 07-06742 (LR3C) for 14V, P/N 07-06786 (LS1A) for 28V LS1A converts alternator to 28V
B & C LIGHTWEIGHT ALTERNATORS MODEL SD-8 ALTERNATOR & REGULATOR MODEL L40 ALTERNATOR
The model SD-8 is a spline-driven, 14V alternator system for aircraft with an open vacuum pump drive pad. Features an ultra-reliable, brushless construction. A permanent magnet assembly supported on sealed ball bearings is spun around a fixed coil. With 8 amps of output, the model SD-8 is adequate for many VFR-day applications. The model SD-8 will power a solid state nav/com and transponder in addition to charging a battery for engine starting. In production for over 10 years, hundreds of model SD-8 systems are flying. The model SD-8 is used by top aerobatic pilots around the world. Also used as backup power source on more sophisticated homebuilts. Wt.:3.7lbs. Pricing includes adjustable, solid state voltage regulator. P/N 07-06770 .........$493.95 Over Voltage Kit 14V (required) ..................P/N 08-00658 ...........$68.95 Over Voltage Kit 28V (required) ..................P/N 07-00708 ...........$64.95 The SD-20 is a high-performance spline-driven alternator that mounts on a standard vacuum pump accessory pad. May be used either as a primary or a stand-by alternator for a rated output 20 amps @ 2500 alternator RPM. Constructed of all NEW materials (with absolutely NO re-manufactured content), the SD-20 is designed for durable service, with heavy-duty sealed ball-bearings, 2 cooling fans, a dynamically balanced rotor, and a special shear section designed into the drive coupling. The SD-20 is available for both 14 and 28 volt applications. and is externally-regulated. It may be appropriately matched with our LR3C, LS-1A, or SB1B Controllers (depending) on your application and electrical system configurations). Measuring 4.6 wide and 6 deep, and weighing only 5.75lbs., SD-20 will clear the tachometer cable and oil filter on stock Lycoming engines. P/N 07-06771 .............$695.00 Gear-driven, 14V alternator system for aircraft powered with Continental C85-12 engines. Features ultra-reliable, brushless construction. Permanent magnet assembly supported on sealed ball bearings is spun around a fixed coil. Use in the prototype Vari-Eze. Has also seen service on many Cassuts, Vari-Ezes, Q-200s. etc. In production for over 10 years, hundreds of 200G systems are in service. With 12 amps of output the 200G will support a modest VFR-night system load. Wt 4.25 Lbs. Pricing includes an adjustable solid state voltage regulator. You supply a Continental generator drive gear assembly. Gear must be shipped by the factory to Aircraft Spruce for installation. P/N 07-06575 ........ $409.00 New Drive gear............................................P/N 07-06500 .........$861.00 Over Voltage Kit 14V (required) ..................P/N 08-00658 ...........$68.95 Over Voltage Kit 28V (required) ..................P/N 07-00708 ...........$64.95 The Basic BAE-14/28 Auxiliary Power Supply is a manually deployed, air driven, emergency electric supply for small aircraft. The unit is capable of supplying electric power to drive a basic complement of flight critical instruments. If a primary electrical system failure should occur, the pilot deploys the miniature turboalternator. The flight can then be continued to the intended destination, or terminated at a convenient airport under more casual conditions. The TurboAlternator is a true stand-by power supply. In the event the aircraft loses its total electrical system the alternator will still function. The unit is self-exciting, thus it will work in the absence of the battery. The alternator was designed to be retrofit or original equipment on most small aircraft. Particular efforts was made to optimize the power output in the minimum package size and weight. The latest technology materials and techniques are used to achieve the high performance at a reasonable cost. The appropriate installation kit is included to reduce installation time and cost. The BAE-14/28 is currently STCd for seven aircraft models: Cessna 210, 206, 182, Piper PA-32, PA-28, Bonanaza, and Mooney. One Cardinal installation is flying on a 337. BPE-14 Turbo Alternator .............................P/N 10-00747 ........ $799.00 BAE-14/28 Auxillary Power Supply .............P/N 10-00748 ..... $2,199.00
Model L60 is a belt-driven, 14 or 28 volt alternator system for wide deck (boss mount) 118HP through 300HP Lycoming engines. The kit includes a NEW alternator, steel mounting bracket, belt tensioning arm, belt and mounting hardware, ready to install. Alternator with pulley installed weighs 8.5 Lbs. With 60 amps of output, the L6. Will provide sufficient power to operate electric heaters in the Eze type airplanes. Warning! It is unwise to use this (or any other high output alternator) unless true over voltage protection is also installed. The LR-3C linear regulator and alternator control system is recommended. L60 Case Mount .............................. P/N 07-06820 .......... $695.00 L60 Boss Mount ............................... P/N 07-06785 .......... $617.00 L60 requires voltage regulator see ABOVE
A 30amp gear-drive alternator for the Continental Engines (C-75 through O-300). After many customer requests for a gear-drive alternator with higher output, B&C Specialty Products introduces the latest product, model BC433-H. Wt: 4lbs.; size: 4dia. X 3.7 installed length. Features a billet aluminum mounting flange and creates 30 amps at cruise RPM. Ships with matching regulator. Sold without the Continental drive gear assembly (customer supplied), and requires the latest revision of the Hub (P/N 07-01327) and Retainer (P/N 07-01328) B&C has a limited supply of used drive gear assemblies, available at additional cost. NOTE: BC433-H requires purchase of PM/OV Kit 5051which provides crucial over voltage protection. P/N 07-00771 ................ $557.00
ACCESSORIES
505-1 B&C 14V Over Voltage Protection .. P/N 07-00772 .................. $68.75 Generator Hub Coupling 653983 ........ P/N 07-01327 ................ $275.95 Generator Attaching Retainer 653982 .... P/N 07-01328 .................. $24.75
More than just another regulator. The LR3C Controller combines three essential devices in one physical container, making it a lightweight, space-saving, and cost-effective alternative for any aircraft electrical system, while also mproving safety of flight. First, the LR3C operates as a quiet, linear regulator, P/N 07-06748 generating no audio or radio noise (in contrast to switching-type regulators). Second, it provides a vital safeguard for your aircraft electrical system with a solid-state, crowbar overvoltageprotection circuit. And third, the LR3C Controller functions as an important low-voltage monitoring and warning system. Used on all externally regulated alternators using circuit type B (one field lead grounded directly) except B&C alternators used in 28v sys tems. This 28v regulator will not work with a B&C alternator. The LR3C weighs approximately 9 ounces Select a location for mounting that will protect unit from heat, vibration, and water; the pilot side of the firewall, or inside the cabin near the instrument panel, is recommended. For experimental aircraft only LR3C (14V) ...........................P/N 07-06742 ............. $228.00 LR3C (28V) ...........................P/N 07-06748 ............. $229.50 LR3C Battery Temp Sensor ..P/N 07-06744 ............. $105.95
regulation.
A must for the PM alternators. The PM/OV was designed to give over voltage protection to the permanent magnet alternator. The yellow light will annunciate if the alternator switch is left off, or if the crowbar over voltage protection has been tripped. The capacitor will filter some noise, and help enhance the 14 Volt ..................P/N 08-00658 ..........$68.95 28 Volt ..................P/N 07-00708 ..........$64.95
Prices Subject to Change Without Notice
314
STARTERS ALTERNATORS
This extraordinarily light weight starter was specifically designed to meet rigorous demands of todays weight sensitive aircraft designs. Weighing only 10.2 pounds, B & C starters develop more torque than standard starters. The first lightweight starter to be developed, the B & C starter has been in production for over 16 years. It is manufactured from 100% new components and features total ball-bearing construction. The pinion gear is mechanically engaged with the ring gear before power is applied to the motor. Cantilevered pinion gear mounting requires no forward shaft support bearing thus eliminating cowl interference. If battery failure precedes engine starting, a positive spring retraction system insures pinion gear disengagement. STCd and PMAd versions for installation on certificated aircraft are available. STCd for aircraft powered by any of the following series of Lycoming engines: O-235 O-290 O-320 IO-320 AIO-320 AEIO-320 O-360 IO-360 AIO-360 AEIO-360 HO-360 HIO-360 O-540 IO-540 AEIO-540 HIO-540 TIO-540
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This new starter for the Continental 0-200 or 0-240 engine solves all the problems that other starters have had worn out clutches, cracked pinion gears, hard to find parts. In addition, the BC320 is 4.3 to 5.2 lbs. lighter depending on whether you are replacing a key-type starter or a pull-cable type starter. The BC320 starter is STCd for use in certificated aircraft and is available with, or without, the STC. Also available are two installation kits one for replacing a key-type starter, the other for replacing a pull-cable type starter. If you are replacing a key-type starter, you will need installation kit 501-1. Before installing the BC320, a needle bearing will need to be removed from your engine. To aid in removing this needle bearing, you may purchase Bearing removal kit, 501-2, for $119.00. If you do not care to keep this tool, you may return it and be refunded $80.00. If you are replacing a pull-cable starter, you will need installation kit 501-3. Before installing the BC320, you will need to cut off a steel shaft that is installed in your engine case. The new BC320 starter is a complete starter, ready to install, that will replace the existing motor, clutch, and pinion-gear. Tested by Continental with over 5000 start cycles without a problem. Recommended by Rutan Aircraft Factory. Except for paperwork, there are no differences between STCd starters and starters for homebuilts. A starter must be ordered to match your battery voltage.
FOR CERTIFICATED AIRCRAFT APPLICATIONS
Part No. 07-06700 07-06705 07-06710 07-06715 07-06716 Model No. BC315-100-1 BC315-100-2 BC315-100-3 BC315-100-4 BC320-1 Pinion Gear Teeth on Ring Pitch Gear LYCOMING 10/12 122 12/14 149 10/12 122 12/14 149 CONTINENTAL Battery Voltage Price 12 12 24 24 12 Pinion Teeth on Gear Pitch Ring Gear LYCOMING 10/12 122 12/14 149 10/12 122 12/14 149 CONTINENTAL Battery Voltage 12 12 24 24 12 $580.00 $579.00 $605.00 $619.00 $798.00
ACCESSORIES
115-09964 Brush Holder Assembly ...............P/N 07-00317 .........$35.50 295-29694 60 Amp. Circuit Breaker ..............P/N 295-29694 .......$34.80
This Jasco alternator kit is STCd for many aircraft including the early Cessna 150, 172, and 175 series as well as Beech Model 35s with early E series Continental engines. Applicable to Continental C-90, 0-200 and 0-300 engines. This kit includes 50 amp alternator, voltage regulator, over-voltage control, and STC documents. Available for 14V systems only. Well-proven over many years of use in a variety of aircraft. In stock for immediate shipment. STCd for Cessna 150-170, 172, 175, Beech 35 Series, Navion A. Skytronics Kit #6560-1. P/N 07-06900 ........ $686.00 Volts Amps Drive Alt. P/N 12 6555T 50 4 stud, 6 spline sqr pad 12 6560T 50 Round pad like Delco config. 12 6565T 50 6 stud, 16 spline rnd. pad 24 7555T 50 4 stud, 6 spline sqr. pad 24 7565T 50 6 stud, 16 spline rnd pad 24 7555H-72B 70 Hiller UH12E round pad 27 7655T 70 4stud, 6spline sqr. pad 7555H-72B Kit 7555H-72B 24 70 Alternator J12M24SPH Reg. Controller J12M24SPH 17-10 17-10 Resist. 150 omega 7655T Kit 7655T 24 70 Alternator J12M24SPH Reg. Controller J12M24SP 17-10 24 70 17-10 Resist. 150 omega Voltage Controler J12M20SP 12 Voltage Controler J12M24SP 24 Voltage Controler J12M24SPH 24 Voltage Controler J24-100SP 24 150 (omega) Resistor 17-10 24 75 (omega) Resistor 17-1 24 Terminal Conversion kit ESC-2 Kit P/N 6555-1 07-06900 6565-1 7555-1 07-75651 07-07555 07-00703 07-00702 07-07555 07-00314 07-01710 07-00703 07-00696 07-01710 07-00697 07-00696 07-00314 07-00698 07-01710 07-00699 07-00701 Price $849.00$ 686.00$9 19.00$85 6.00$918 .00$1,27 1.00$92 1.00 $1,462.00 $1,271.00 $187.95 $17.65 $921.00 $189.50 $17.65 $189.50 $189.50 $187.95 $210.95 $17.65 $18.50 $98.75
B & C ACCESSORIES
501-1 .....Installation Kit (key type) ..............P/N 07-06752 .......... $23.60 501-2 .....Bearing Removal Kit ....................P/N 07-06753 ........ $117.95 501-3 .....Installation Kit (pull cable) ............P/N 07-06754 .......... $73.75 The GenniPod wind generator has been designed and built for use on EXPERIMENTAL and Ultralight Aircraft. Utilizing a new solid state voltage regulation system, the GenniPod has been designed to target 13.5 volts at a 4 amp output. Final Phase testing demonstrated sufficient power for, Instrument panel gauges, GPS, Handheld NavCom, VW Ignition (point), and a fuel transfer Pump for those long cross country flights, (OSHKOSH!) Targeted airspeed for this unit was a cruise of 75 mph, and an aircraft Vne of 110 mph. Your GenniPod is delivered ready to mount on your airplane. Two wires, (Positive and Negative), will be linked to your electrical system. You will supply generator switch, 5 amp Breaker, and wiring to link the GenniPod to your system. A small motorcycle lead acid battery is also required These items are not supplied to allow you to build to your needs, and to keep our prices low. The GenniPod measures approximately 9 long, with a diameter of 7 at the prop. Weight will be approximately 3.5 pounds installed. P/N 11-07182 ................$249.50
The Tempest PowerFlite series of aviation engine starters represents a new state-of-the-art energy efficient design providing reduced current draw and long life. The PowerFlite starter mounts directly to existing TCM engines and is available in both 12 and 24 volt configurations. Tempest starter part numbers PL13459 (12v) and PL13484 (24v) are eligible on TCM engine models O-300-D, GO-300-D, IO-346, IO-360, L/TSIO-360, O-470, IO-470, TSIO-470, IO-520, TSIO-520, GTSIO-520, IO-550, TSIO-550 and TSIOL-550. Powerflite Starter 12V.........................P/N 08-07284 ..................$699.00 Powerflite Starter 27V.........................P/N 08-07283 ..................$699.00 See www.aircraftspruce.com for parts and accessories.
TEMPEST STARTERS
315
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
High Performance Armature Increased commutator bar length Thin laminations High quality magnetic alloy 12 & 24 volt winding configuration Redesigned Brush Holder Metal construction for heat sinking Offset brush position for increased brush contact area
Lightest Starter Available Weight 7.6 lbs. Perfect spin Sweet spot engine starts, doesnt drain your power like other starters Start efficiency Lowest inrush & operating current draw in the industry No mechanical Bendix Electromechanical solid-state solenoid Powerful permanent magnet Performance Easy installation Left or right mount FAA/PMA approved 2 Year Unlimited Hours Warranty *
The X-Drive aircraft starter is one of our most popular models because of its awesome power and compact size. Targeted toward Lycoming users that want one of the industries lightest but most powerful starter on the market, the X-Drive delivers the same high torque, low current draw, and superior duty cycle that had previously been available only to E-Drive customers. The introduction of the XDrive starter allows Hartzell Engine Technologies to service virtually all OEM and aftermarket Lycoming applications.* Kick-backs not covered Description Part No Price Only 7.6 lbs. Hartzell X-Drive Starter SRB-9021 08-06271 $394.00 Lightest Starter Available Hartzell X-Drive Starter SRB-9022 08-06272 $395.95 Hartzell X-Drive Starter SRB-9031 08-06273 $395.00 Hartzell X-Drive Starter SRB-9032 08-06274 $395.00 APPLICATION DATA GUIDE Hartzell X-Drive Starter SRZ-9021 08-06275 $358.00 Solenoid to the Left: (X-Drive series: see figure 1) Hartzell X-Drive Starter SRZ-9022 08-06276 $358.00 SRZ-9021 SRZ-9022 Hartzell X-Drive Starter SRZ-9031 08-06277 $358.00 (12 Volt - 149 tooth) (12 Volt - 122 tooth) Hartzell X-Drive Starter SRZ-9032 08-06278 $358.00 SRB-9021 SRB-9022 (24 Volt - 149 tooth) (24 Volt - 122 tooth) CROSS-REFERENCE CHART FIGURE 1 Solenoid to the Right: (X-Drive series: see figure 2) Sky-Tec P/N X-Drive P/N Sky-Tec P/N X-Drive P/N SRZ-9031 SRZ-9032 149-12PM SRZ-9031 122-12LS SRZ-9022 (12 Volt - 149 tooth) (12 Volt - 122 tooth) 149-24HT SRB-9021 122-12PM SRZ-9032 SRB-9031 SRB-9032 149-24LS SRB-9021 122-24LS SRB-9022 (24 Volt - 149 tooth) (24 Volt - 122 tooth) 149-24PM SRB-9031 122-24PM SRB-9032 (12/14 pitch works on a 149 tooth ring gear & 10/12 pitch FIGURE 2 works on a 122 tooth ring gear.) 149-12LS SRZ-9021
Robust spring design High performance field housing Rare earth neodymium magnets Small package Stronger flux field Improved temperature stability 9.5 lbs.
Starter system designed for maximum performance. Drive assembly integrates proprietary pinion gear, clutch, torque limiter, and actuator in one complete module. Available for coarse and fine pitch ring gears, clock-wise and counterclock-wise rotation. No periodic service or recurring maintenance required. 9.5 lbs.
APPLICATION CHART
E-Drive Number - Approved Alternative for the following: ERB-8011 MHB-4001 MHB-4002 MHB-4003 MHB-4005 MHB-4007 MHB-4010 MHB-4012 MHB-4013 MHB-4014 MHB-4016 MHB-4017 MHB-4019 MHB-4020 ERB-8012 MHB-4015 MHB-4002 MHB-6001 ERZ-8011 MZ-4205 MZ-4206 MZ-4207 MZ-4217 MZ-4218 MZ-4219 MZ-4221 MZ-4224 MZ-4222 MZ-4223 MZ-4225 MZ-6222 MZ-6224 ERZ-8012 MZ-4204 MZ-6204
MODEL
DESCRIPTION Clockwise rotation, 12 Volt, 149 tooth - 12/14 Pitch Gear Clockwise rotation, 12 Volt, 122 tooth - 10/12 Pitch Gear Clockwise rotation, 24 Volt, 14 9 tooth - 12/14 Pitch Gear Clockwise rotation, 24 Volt, 122 tooth-10/12 Pitch Gear
PART NO.
PRICE
ERZ-8011
07-01102
$386.00
ERZ-8012
07-01103
$386.00
ERB-8011
07-01099
$438.00
ERB-8012
07-01101
$435.95
316
CM WP ME HA AP
FACTORY OVERHAULED
Core $150.00 $150.00 $190.00 Part No. CALL 07-06501 07-06502 Price CALL $298.95 $296.95 Part No. 08-06180 08-06182 07-01110 07-01109 08-06179 08-06186 08-06188 Price $825.00 $676.00 $394.00 $558.00 $489.00 $691.00 $776.00
LG EP CS IN EL AV TO PS BV
Mfg. Ref. MC-6501 MHB-4004R MHB-4005R MHB-4008R MHB-4014R MHB-4016R MHB-4017R MHB-4018R MHB-4020R MHJ-4003SR MHJ-4004R MHJ-4005R MMU-4001R MZ-4204R MZ-4208R MZ-4214R MZ-4219R MZ-4220R MZ4222R MZ-4224R MZ-4225R MZ-4226R
P/N 07-06503 08-06206 08-06207 08-06203 08-06209 07-06504 08-06211 08-06212 CALL 07-06505 08-06204 08-06205 07-06506 CALL 08-06208 07-06513 CALL 08-06198 07-06509 CALL 08-06201 08-06202
Core $150.00 $175.00 $235.00 $134.00 $200.00 $200.00 $200.00 $200.00 $200.00 $190.00 $185.00 $300.00 $200.00 $165.00 $124.00 $100.00 $200.00 $200.00 $200.00 $200.00 $200.00 $200.00
Price $296.95 $726.00 $726.00 $413.95 $489.95 $538.00 $487.95 $489.95 CALL $327.95 $729.00 $798.00 $465.95 CALL $355.95 $268.95 CALL $430.95 $420.95 CALL $426.95 $426.95
The kit includes a duplicate 95 amp alternator to the original equipment, along with all the pulleys, belts, brackets and hardware for installation on the Lycoming IO-540 series engines. All system controls are panel mounted and the backup system is activated with a flip of a switch. STC Approved for Cessna 182, 182T, 182S. Installation during your next major maintenance event or annual should only add a few hours, company officials note, adding the system operates independently of the aircraft MCU, providing total electrical system redundancy. Alternator Kit Cessna 182/182T .........P/N 07-01490 ...............$4,675.00 Dual Alternator Kit Cessna 182S ........P/N 07-01804 ...............$4,585.00
Description Part No. Price EBB75A MZ series 42054207, 42174219. MHB 07-06515 $106.95 series 40014007 & 40104013 EBB124AMHJ series-All, MMU series-All, M24204, 07-06510 $104.95 MHB4015 EBB131AMZ series 4221 to 4223, MHB 4016 to 4019 07-06511 $93.50 EBB142A STARTER DRIVE ES EBB142A 07-06512 $105.95 Lamar 9301001-F 01 OVERHAUL KIT PM1201 & 07-01180 $81.75 2401 Series Starters includes shear pin
The Magnaflite lightweight starter listed in the table below will be superceded by the E-Drive and/or X-Drive starter listed therein. All Magnaflite P/Ns listed below that are currently installed, being installed or in inventory are in no way affected. Standard Limited Warranty, is in effect and returns for reason of supercedure will not be accepted. KAPS Part Number X-Drive Left Hand Solenoid X-Drive Right Hand Solenoid E-Drive MHB-6016 SRB-9021 SRB-9031 ERB-8011 MHB-6018 SRB-9021 SRB-9031 ERB-8011 MMU-6001 SRB-9022 SRB-9032 ERB-8012 MZ-6204 SRZ-9022 SRZ-9032 ERZ-8012 MZ-6222 SRZ-9021 SRZ-9031 ERZ-8011 MZ-6224 SRZ-9021 SRZ-9031 ERZ-8011 MZ-6226 SRZ-9021 N/A ERZ-8011
CONVERSION CHART
317
SKY-TEC STARTERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SKY-TEC ST2 & KCST2 MODEL STARTERS FOR SMALL CONTINENTAL ENGINES
SKY-TEC C12ST2 - FOR FACTORY KEYSTART STARTER FOR A65-12 THROUGH O-300C ENGINES
- 9.2 lbs., Bolt-off / Bolt-on, High Torque, Low-Current, Gasket Included, Replaces TCM starter & continuous running sprag clutch in TCM factory keystart engines. Now featuring internal, self-resetting Kickback Protection System - zero maintenance - no pin to shear. Featuring Sky-Tecs Exclusive KPS Kickback Protection System, Sky-Tecs NL-series of starters fit all Lycoming powered aircraft. Also available in Extended Cranking 24V SuperDuty versions /ec models (see table below). Unmatched duty cycle capabilities and durability on even the hardest starting 12V or 24V aircraft. Now available as factory original equipment on nearly all new Lycoming-powered airplanes. No other starter is manufactured to more exacting standards for quality, reliability and workmanship than Sky-Tec Lycoming starters. All NL-series starters are FAA-PMA certified as replacement parts for all non-geared, flat Lycoming engines. Sky-Tec NL-series starters fit without modification or 337 paperwork. At only 9.4 lbs., the NL-series is the lightest Bendix-free inline available. Generous two-year warranty. ModVoltage/ el Description No. 12 Volt (Also 12224 Volt SwitNL chable) 12 Volt (Also 14924 Volt SwitNL chable) 12 Volt (Also 14924 Volt SwitNLR chable) Pitch FAA-PMA Eligible Part No. Price
SKY-TEC KCST2 - STC-CERTIFIED CONVERSION KIT FOR FACTORY PULL-START ENGINES - STC Modification of Engine Required (removal
of OEM starter pinion shaft in rear of engine). STC Modification of Airframe Required (replacement of pull-start T-handle with Sky-Tecsupplied push button & wiring) High Torque, Low-Current, 9.2 lbs. Now featuring internal, self-resetting Kickback Protection System - zero maintenance - no pin to shear. Complete Conversion Kit includes: C12ST2/S Starter, Push Button Switch, Wiring Harness, Gasket, Instructions, STC for Airframe Modification, STC for Engine Modification SKY-TEC KEY-START C12ST2/SR - REVERSE TURNING for Continental GO-300 Engines ONLY - Internal, self-resetting Kickback Protection System - zero maintenance - no pin to shear. 6-8 lbs. lighter and significantly more reliable than the original, heavyweight factory starter. Also sold in a Kit (KCST2/SR) that includes the C12ST2/SR reverseturning starter, STC to modify the engine to install the starter, STC to modify eligible aircraft to replace the pull-type starter handle with the included push-to-start button, new gasket, push button wiring harness, instructions and PUSH TO START placard. Model: C12ST2/SR Weight: 8.9 lbs. Model C12ST2 (Starter only) ..............P/N 07-00614 ........ $564.00 Model C12ST2/S (Starter only) ..........P/N 07-00719 ........ $564.00 Model KCST2 conversion kit ..............P/N 07-00721 ........ $586.00 KCSW Switch and harness only .........P/N 07-00722 .......... $47.50 Model C12ST2/SR (Starter only) ........P/N 07-01855 ........ $564.00 Model KCST2/SR (Kit) ........................P/N 07-01856 ........ $527.00
10/12 (for Lyc 235, 290, 122- Tooth 320, 360, 540 07-00761 $431.00 Rng Gears) & 720 12/14 (for Lyc. 235, 290, 149- Tooth 320, 340, 360, 07-00762 $431.00 Rng Gears) 540 12/14 (for 149- Tooth Rng Gears)
Lyc. LIO-320, LO360, LTO-360, 07-00763 $431.00 LIO-360, LHIO360, & LTIO-540
Safe for all types of TCM starter adapters! Feature Sky-Tecs exclusive proprietary clutch design virtually eliminating starterinduced TCM starter adapter wear. FAAPMA certified replacement part approved for all TCM starter adapters including classic Style, improved style, permold, and sand cast engines. Simple bolt-off / bolt-on installation. Designed to crank no slower than TCM heavyweight OEM starters. Generous 2-Year factory warranty. Model C12ST3 12 Volt ....................... P/N 07-00766........$498.00 Model C24ST3 24 Volt ....................... P/N 07-00767........$527.00 The ST5 starter couples a high power 2.2 kW motor with an innovative solenoid-engaged (and disengaged) drive system completely disengages the powerful permanent magnet motor while the starter is unpowered eliminating possible TCM starter adapter wear while providing authoritative, high-torque starting. Positive solenoid enabled engagement and disengagement allows the TCM starter adapter to fully unwrap under all normal operating conditions thus greatly prolonging starter adapter life. C12ST5 ................................P/N 07-01341 ................................$512.00 C24ST5 ................................P/N 07-01342 ................................$556.00 6 Battery Cable Extension kit aids the installatin of starters in aircraft that have limited slack available in the aircrafts starter power cable. Generally not required for TCM starter installations. May be needed in some PM, and NL model Lycoming installations. P/N 07-00923 .................... $12.50 The lightest Lycoming starter ever at just 6.3 lbs. The 122-LSA is Lycomings factory OEM starter on the new O-233 LSA engine. An excellent 12V starter for O-235, O-290 and O-320 engines with 122-tooth ring gears. Plenty of torque, high cranking speed, low current draw. Features a precision machined housing specifically designed to mount the lightweight Plane-Power AL12-EI60 alternator - enabling the industrys lightest weight starter/alternator pairing at just 13.2 lbs. for both! Perfect for lightweight, Lycoming-powered LSA aircraft. Experimental. Starter 122-LSA..................................P/N 07-01806 .................$454.00 122-LSA Starter & AL12-E160-L Alternator Kit P/N 07-01806-1 ..............$898.00
12210/12 (for Lyc. 235, 290, 24 Volt Super NL/ 122- Tooth 320, 360, 540 08-07061 $488.00 Duty ec Rng Gears) & 720 14912/14 (for Lyc. 235, 290, 24 Volt Super NL/ 149- Tooth 320, 340, 360, 08-07059 $488.00 Duty ec Rng Gears) 540 & 14912/14 (for 24 Volt Super NLR/ 149- Tooth Lyc. LTIO-540 08-07060 $488.00 Duty ec Rng Gears) Newly Improved with internal, self-resetting Kickback Protection System! Now stronger and even more durable thanks to an improved strontium fortified aluminum alloy and beefed-up mount castings. Still one of the lightest Lycoming starters available at only 8.5 lbs. Spins twices as fast as most heavyweight OEM starters. Zero maintenance - no pins to replace in the event of a kickback. FAA-PMA approved for most Lycoming engines. Also available specifically configuredd to directly replace costly B&C starters on Robinson helicopters. Some airframe applications may require minor modification for best fit. Confirm aircraft fit, ring gear tooth count and voltage before ordereing. Generous 2-Year factory warranty. Model Voltage Description Part No. Price 122-12HT 12 Volt 10/12 Pitch (122 Tooth) 07-06250 $488.00 122-24HT 24 Volt 10/12 Pitch (122 Tooth) 07-06251 $531.00 149-12HT 12 Volt 12/14 Pitch (149 Tooth) 07-01840 $488.00 149-24HT 24 Volt 12/14 Pitch (149 Tooth) 07-01841 $531.00 Replaces B&C Starters 149-24HT-H 24 Volt on 24 Volt Robinson 07-01844 $531.00 Helicopters
Newly Improved! The original Flyweight starter that started the lightweight revolution is now even stronger and more durable thanks to an improved strontium-fortified aluminum alloy and beefed-up mount castings. Still one of the lightest Lycoming starters available at 8.25 lbs. Spins twice as fast as most heavyweight OEM starters. Zero maintenance. FAA-PMA approved for most Lycoming engines. Some airframe applications may require modification for best fit. LS model has the solenoid offset to the left side and PM model is offset to the right. Model Part No. Price Confirm aircraft fit, ring gear tooth count 122-12LS 07-06245 $380.00 and voltage before ordering. Generous 149-12LS 07-06246 $380.00 2-Year factory warranty. Note: The LS 122-12PM 07-06252 $380.00 Solenoid is at the 2:30 position and the 149-12PM 07-06253 $380.00 PM Solenoid is at the 7:30 position when 122-24PM 07-06249 $452.00 149-24PM 07-06257 $452.00 viewed from the front.
For complete listing of recommended Sky-Tec Starters by Aircraft make & model, please see the Aircraft Spruce website for a link to the Sky-Tec website
at www.aircraftspruce.com
318
LAMAR STARTERS
Lamar Permanent Magnet Starters represent the next generation in starter technology, setting new standards in performance and reliability. These new lightweight starters deliver exceptional torque to start virtually any general aviation piston engine in nearly any environment, yet weigh about 40 percent less than conventional starters. The key is Presicions patented permanent magnet motor design. It replaces the bulky windings of a conventional starter motor with lightweight permanent magnets. This revolutionary design not only eliminates considerable weight, but results in more efficient starter operation and improved performance under all conditions. During extensive performance testing, Lamar starters consistently provided quicker engine starts than conventional starters under a variety of operating conditions. These TBO starters are built to go the distance between engine overhauls. Conventional starters generally dont last. They usually have to be pulled off for repair or replacement at least once during the life of the engine. P/N 12V PM1203 PM1201 PM1201 PM1201 N/A PM1204 PM1201 PM1201 N/A PM1204 PM1201 PM1201 N/A PM1202 PM1201 PM1201 PRESTOLITE MZ-4204 MZ-4205 MZ-4206 MZ-4207 MZ-4208 MZ-4216 MZ-4217 MZ-4218 MZ-4219 MZ-4220 MZ-4221 MZ-4222 MZ-4223 MZ-4224 MZ-4225 MZ-4226 LYCOMING 76210 76213 76211 75699 75787 LW-10556 LW-14209 LW-14207 LW-14211 LW-14215 LW-15573 LW-17771 LW-15576 LW-16460 LW-18047 LW-18989 PRICE $528.00 $489.00 $489.00 $489.00 ----$489.00 $489.00 ----$489.00 $489.00 ----$489.00 $489.00 P/N 24V PM2401 PM2401 PM2401 N/A PM2401 PM2401 PM2401 PM2401 PM2401 N/A PM2401 PM2402 PM2401 PM2403 PM2401 N/A PM2402 646238 $538.00 PM2401 PM2401 N/A N/A PM2403 PRESTOLITE MHB-4001 MHB-4002 MHB-4003 MHB-4004 MHB-4005 MHB-4007 MHB-4008 MHB-4009 MHB-4010 MHB-4011 MHB-4012 MHB-4013 MHB-4014 MHB-4015 MHB-4016 MHB-4017 MHB-4018 MHB-4019 MHB-4020 MHB-4004 MHB-4005 MHB-4001 LYCOMING 76212 75700 76214 77879 78791 LW-11936 LW-12023 LW-12159 LW-14208 LW-14212 LW-14210 LW-14213 LW-14214 LW-15483 LW-15572 LW-15571 LW-15577 LW-15574 LW-18990 77879 LW-12787 LW-16207 PRICE $495.00 $495.00 $495.00 --$495.00 $495.00 $495.00 $495.00 $495.00 --$495.00 --$495.00 $505.00 $495.00 ----$495.00 $495.00 ----$505.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Lamar Technologies overhaul kits include all parts necessary for a normal major overhaul, as well as any special tools, lubricants, and thread compounds. In addition, a complete digital Overhaul and Parts manual is included. Description Part No. Price PM1201-OHK - Fits all PM1201/1202 starters 07-01269-1 $196.95 PM1203-OHK - Fits all PM1203 starters 07-01270-1 $196.95 PM1204-OHK - Fits all PM1204 starters 08-06007-1 $247.50 PM2401-OHK - Fits all PM2401/2402 starters 07-01272-1 $196.95 PM2403-OHK - Fits all PM2403 starters 07-01273-1 $196.95 PM2404-OHK - Fits all PM2404 starters 08-06009-1 $196.95
FOR A COMPLETE LISTING OF LAMAR STARTER OVERHAUL KITS & REPLACEMENT PARTS, SEE WWW.AIRCRAFTSPRUCE.COM
In addition to the factory new Lamar starters listed above, Aircraft Spruce also stocks overhauled Lamar starters. The PM1201 starter is ideal for the Lycoming O-320 & O-360 series engines and the PM2401 is applicable to the Lycoming O- 540 series engines. Like the new Lamar starters, these overhauled starters are FAA/PMA approved, fully bench tested, provide superior cold weather performance, utilize a patented permanent magnet design, use a planetary gear reduction for optimum speed and torque (110 RPM), and draw less amperage than lightweights to help lengthen battery life.
PM1201 starter ............... P/N PM2401 starter ............... P/N PM1204H starter............. P/N PM2404H starter............. P/N PM1207H starter............. P/N PM2407H starter............. P/N
08-01201 ..................$334.95 08-02401 ..................$365.95 08-06011 ..................$294.95 08-06015 ..................$319.95 08-06012 ..................$270.95 08-06016 ..................$303.95
The SuperSwitch is designed to replace all contactors on the aircraft with a wide variety of applications from master contactor through starter, external power, and alternator contactors. The SuperSwitch reduces weight and increase reliability through solid state technology. Both Bi-directional and Uni-directional functions allow multiple applications. Current limiting is available for special applications requiring Smart technology. Experimental only. Features: Up to 66% lighter weight 99% more reliable 5 to 44 volt operating range Replaces all mechanical contactors Solid state technology No moving parts Up to 600 amps momentary operation Up to 100 amps continuous Negative or positive turn on Specifications: Input: Input control current 5 to 44 volts Output: Operating DC voltage range 0 to 44 volts Maximum continuous current 100 amps Maximum surge current (IDM) - .1mS: 1200 Ambient operating temperature range: -40 C to 85 C Weight: Uni-directional .3 lbs Bi-directional .5 lbs Encapsulation: Potting or conformal coating Description Uni-Directional Superswitch- Neg. Bi-Directional Superswitch - Neg. Uni-Directional Superswitch- Pos. Bi-Directional Superswitch - Pos. Part No. 07-01283 07-01284 07-01383 07-01384 Price $119.95 $149.95 $119.95 $149.95
319
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Lamar MC10 is a master electrical control unit developed for 14V and 24V single engine experimental aircraft. It is designed to mount on the firewall or fuselage. It houses all the major electrical components except for the battery, starter, and alternator. the MC10 provides a greater degree of protection against moisture, dust and accidental electrical shorts along with the MC10 convenience of all the primary electrical components in one location. Features low installation cost, ease of installation and simplified troubleshooting and repair with several new performance & safety features. The MC10 embodies the following functions: Description Master (battery) (solenoid) control closing the master Lamar Master Controller only 14V Exper. switch on pilots panel connects the battery to the primary bus. 3 aircraft bus outputs, protected via Lamar Master Controller 28V Exper. resetable circuit breakers. Alternator Control; voltage Lamar XT2860 New Alternator 28 regulation, overvoltage protection, field output overload Lamar Master Control 14V Exp. MC-10 protection, alternator feeder fault protection Starter XT60 Lamar AC14-EXP 28V control (solenoid) Low voltage warning.(L model also includes overvoltage, over-current and reverse-current annunciation) Lamar GC07-EXP Generator Control Battery charge/ discharge ammeter drive (current shunt) Clock output Lamar GC11-EXP Generator Control (always-on) protected with easily accesible external mounted fuse. Lamar MC09-T1 Master Control Turbo Ground power receptacle & control (solenoid) with reverse polarity protection.
PM Starter
Part No. 11-03295 11-03298 07-00839 11-03295 11-05041 11-05042 11-05043 11-05055 Price $1,162.00 $1,197.00 $650.00 $1,162.00 $159.95 $1,414.00 $1,189.00 $3,750.00
07-01151
$177.95
07-01153 $352.95 07-01454 $246.95 07-01455 $240.95 11-04130 $182.95 07-01456 $209.95 07-01157 $209.95 07-01158 $537.00 07-01159 $3,429.00 07-01161 $630.00 07-01162 $196.95 07-01163 $177.95 07-01164 $177.95 07-01803 $424.95 11-03164 $239.95 07-01166 $238.95 07-01167 11-03163 07-01168 07-01169 07-01170 11-03166 11-03167 07-01171 07-01172 07-01173 07-01174 07-01175 11-03165 07-01176 $284.95 $252.95 $624.00 $75.50 $77.50 $162.95 $174.95 $81.75 $620.00 $367.95 $526.00 $558.00 $179.95 $378.95
Aviation grade solenoid for applications in continuous duty, fitting current GA production aircraft as well as legacy aircraft. Replaces both single terminal switched units, as well as the current double terminal switched units in production today. All units have multiple quality and functional tests prior to certification and delivery. Features: Replaces most contactors in general aviation. Available in 12 or 24 Volt. Available in Continuous or Intermittent. All units inspected and tested to performance standards Description X61-0028 12V Continuous X61-0029 24V Continuous X61-0030 12V Intermittent X61-0031 24V Intermittent Part Number 07-01875 07-01876 07-01877 07-01878 Price $49.95 $49.50 $81.85 $81.85
LAMAR SOLENOIDS
320
ENGINE PARTS
INTAKE HOSES
Lycoming 1-3/4 Intake Hose 69603 ..............$7.50 Cont. #22800 OUTER & Cont. #21185 INNER Hose (8 sets required for A-65 thru 0-300) P/N 08-03700 ..$6.60 Cont. #22800 OUTER Intake Hose 22800 ..............$4.95 Cont. #21185 INNER Intake Hose 21185 ..............$1.62 These gaskets are for the fuel injected IO series, sometimes referred to as the Angle Valve cylinder Lycoming They are not FAA approved and are not manufactured under a PMA. These are used on Angled valve Lycoming engines IO-360, IO-540, IO-720. P/N 08-05882 .. $5.85
INTAKE GASKETS
Cont. #21327 (4) for A-65 only. $1.27 ea Cont. #22250 (4) for C-85 0-300 .... $1.56 ea
Oil Pressure Screen Housing P/N 68974 .................................. $536.00 Oil ScreenP/N 62817.............................. $99.65 Oil Screen Housing Gasket P/N 61173 ...................................... $1.88 FOR OIL COOLER INSTALLATION ADD: SpringP/N 69436 .................................... $49.85 PlungerP/N 62415 ................................. $34.75 GasketP/N AN900-10 ............................... $0.44 Cont. Oil Screen .......P/N 08-01544 ..... $222.95 OIL COOLER PARTS SHOWN ABOVE NOT USED WITH THERMAL VALVE ASSY
LYCOMING PARTS TO CONVERT 0-235 WITH SPIN ON OIL FILTER TO OIL SCREEN
CM WP ME HA AP LG
Cont.. #21493 (08-05237) for A-65 thru 0-300 $1.25 ea Cont. #632837 Stainless Steel ........... $2.40 ea #77611 for 0-320 - not for H series ..... $7.70 ea Cont. #22022 (5/16-24) for A-65 thru 0-300 (8) ............................ $1.23 ea Cont. #MS20500-428 (1/4-28) for 0-470 (12) ...... $2.45 ea Lyc. #STD1410 (5/16-18) .. $2.30 ea
EXHAUST GASKETS
EXHAUST NUTS
Cont. #530162 for A-65 thru 0-300 (4 required) ....................$5.90 ea Lyc. #75906 for 0-235 thru 0-320 (4 req) ....$2.65 ea
Cont. #530019 for A-65 thru 0-200, Flanged Shaft ...................... $39.75 Ref. P/N Item Price
Cont. #24321 for A-65 and C-85, Taper Shaft ......................... $59.70 Lyc. #76940 for 0-235, 0-290 ................. $27.60
Cont. Engine Applications, A-65 thru 0-200 (1) each: -10: Oil sump drain plug thermometer hole in oil screen, suction tube assy ............$0.44 Ea -14: Oil relief valve .............................$0.58 Ea -22: Tach drive housing .....................$1.98 Ea -28: Oil pressure screen.....................$0.56 Ea
#2........ 352068 ........Oil Seal ....................................... $8.75 #3........ 530406 ........653983 Hub Coupling............. $275.95 #4.......07-01328 ......Attaching 653982 Retainer ....... $24.75 #5........ 626543 ........Bushing* .............................. $13.50 ea #6........ 530407 ........Sleeve....................................... $95.75 #7........ 531325 ........Gear........................................ $432.95 #8........ 530412 ........Slotted Nut................................ $33.00 #9........ 352179 ........Starter Gaslet ............................. $6.95 #10....... 35019 .........Generator Gasket ....................... $7.65
EP CS IN EL
*Note: 626543 is sold as a pair. If only one bushing is needed, order PN 08-06218 ........... $6.75
Lyc. #61173 for 0-235, 0-290 (1) (2 with oil cooler) ....................$1.88 Ea
For A-65 thru 0-200 Cont. #21051 (Top) ..............$2.55 Ea Cont. #21323 (Bottom)$1.88 Ea
Price Ref. P/N Item Qty. Each #1......628555-16 ...Hose .............(4) ........ $8.85 #2........ 530627 ......Spacer ..........(4) ...... $27.50 #3........ 530626 ......Seat ..............(8) ...... $18.75 #4........ 530740 ......Bushing ........(8) ...... $15.50 #5........ 530741 ......Washer .........(8) ........ $7.50 AN6-55 ......Bolt ...............(4) ...... $10.75 AN310-6 .....Nut................(4) ........ $0.97 MS24665-283 Pin ................(4) ........ $0.03
AV TO PS BV
These homebuilders Lycoming valve cover gaskets replace the original cork gaskets which come standard on Lycoming 0-235, 0-320 and 0-360 engines. NOT FAA approved. For experimental aircraft only. P/N 08-01187 ............. $3.95
Continental Inner Valve Spring Used on C90 & O-200 Engines P/N 07-24031...........$12.50
321
ENGINE PARTS
CONTINENTAL ENGINE PARTS LYCOMING ENGINE PARTS
O-235 L,N SERIES Price Each Price Each
71973 Gasket, intake ...................$1.46 SSRSTD-1196 Intake hose 1-1/2..........................$4.55 69603 Intake hose 1-3/4 ..............$7.50 73938 Intake Valve.....................$19.90 75089 Piston, high compression .........$127.95 75413 Piston, low compression...........$167.95 SSRLW-13444 Piston pin...........$84.60 SSRLW-18661 Push rod packing..........................$3.18 74241 Ring, compression steel cylinder ..............................$39.80 SSR73857 Ring, oil ctl steel cylinder............$31.75 69373 Bearing, rod, 8 req. .........$24.25 71105 Camshaft follower tappet ........... $106.95 SSR62869 Cyl base seal .............$5.50 STD-2180 Cyl drain hose .............$5.75 LW-11997 Crankshaft seal .........$39.95 SSR31C-12 Ex. stud ....................$6.45 STD-1410 Ex. nut .........................$2.30 41271 Fuel pump, mechanical ............$207.95 75906 Gasket, rocker 4 required. $2.65 77611 Gasket, no-blow ................$7.70 71973 Gasket, intake ...................$1.46 SSR61499-1 Gasket set, moh .......................$228.95 SSRSTD-1196 Intake hose 1-1/2 ........................$4.55 LW11901 Intake Valve ...............$86.95 SSRLW-13445 Piston pin...........$71.50 68028 Piston pin plug...................$8.60 SSRLW-18661 Push rod packing..........................$3.18 LW-11800 Spring, valve outer....$27.75
CM WP ME HA AP LG EP CS IN EL AV TO
C-85
Price Each
Price Each
643967 Ex. nut ..............................$2.45 SA643873 Exhaust Valve .........$155.95 653191 Gasket, rocker, angle .......$9.75 SSR628260 Gasket, no-blow ........$9.90 SSR536413 Gasket, intake ...........$0.60 646546-A1 Gasket set, moh .....$213.95 642917-1 Intake hose ..................$26.75 646263 Piston ............................$165.95 539467 Piston pin ........................$55.75 SA534610 Push rod packing ........$1.15 649226 Ring set, steel barrel ....$136.95 649226CP Ring set, chrm barrel $120.95 SSR539740 Rocker shaft.............$32.50 637837 Spring, valve, outer ...........$8.25 631521 Springs, valve, inner..........$4.90
639640 Bearing set, rod (2 req.) ..$15.50 21477 Cyl base seal.....................$0.79 530917 Crankshaft seal taper ....$49.95 SA402151 Ex. stud.......................$3.85 22022 Ex. nut ...............................$1.23 646612 Exhaust Valve .............$195.95 653728 Gasket, rocker .................$5.90 632837 Gasket, no-blow ..............$2.40 22250 Gasket, intake ...................$1.56 646539-A1 Gasket set, moh ....$118.95 21185 Intake hose ........................$1.62 641792 Intake Valve (30 degree) .$65.75 530019 Nose seal, flange sft......$39.75 530830 Piston pin.......................$62.50 539840 Push rod packing ............$1.57 649632-A1 Ring set, steel barrel$34.50
O,IO-360
SSA72877 Camshaft follower ....$90.50 SSR71481 Cyl base seal .............$3.35 LW-11997 Crankshaft seal .........$39.95 SSR31C-12 Ex. stud ....................$6.45 STD-1410 Ex. nut .........................$2.30 LW-19001 Exhaust Valve .........$243.95 LW15473 Fuel pump, mech. ....$379.00 75906 Gasket, rocker ...................$2.65 77611 Gasket, no-blow ................$7.70 71973 Gasket, intake ...................$1.46 SSR75439-1 Gasket set, moh .......................$267.95 69603 Intake hose 1-3/4 .............$7.50 75089 Piston, high compression .........$127.95 SSRLW-18661 Push rod packing..........................$3.18 74241 Ring, comp steel cyl ........$39.80 SSR73857 Ring, oil ctk steel cyl...................$31.75 LW11795 Springs, Valve, Inner ..................$17.50 LW-11800 Springs, Valve, Outer .................$27.75
O-290
69373 Bearing set, rod ...............$24.25 SSR72877 Camshaft follower ..$130.95 SSR71481 Cyl base seal .............$3.35 SSR31C-12 Ex. stud ....................$6.45 STD-1410 Ex. nut .........................$2.30 41271 Fuel pump, mechanical ............$207.95 75906 Gasket, rocker ...................$2.65 77611 Gasket, no-blow ................$7.70 71973 Gasket, intake ...................$1.46 SSR69371-1 Gasket set, moh .......................$261.95 SSRSTD-1196 Intake hose 1-1/2 ........................$4.55 Intake Valve 73938.....................$19.90 69841 Piston ............................$358.50 SSRLW-18661 Push rod packing..........................$3.18 62916 Ring, compression steel cylinder .........$97.00 69401 Ring, oil control steel cyl ......................$20.75 LW11795 Spring, Valve, inner ...$17.50 LW-11800 Springs, Valve, outer ..................$27.75 69373 Bearing, rod .....................$24.25 SSR72877 Camshaft follower ..$130.95 SSR71481 Cyl base seal .............$3.35 LW-11997 Crankshaft seal .........$39.95 SSR31C-12 Ex. stud ....................$6.45 STD-1410 Ex. nut .........................$2.30 LW-19001 Exhaust Valve .........$243.95
IO-520 TSIO-520
630826 Bearing set, rod .................$7.95 653888 Camshaft follower tappet .$196.95 SSR641066 Cyl base seal .............$6.95 PA641250 Crankshaft seal ..........$46.50 SSR401893 Ex. stud ......................$3.26 SSR638125 Ex. stud, rosan...........$6.50 Ex. nut MS20500-428.....................$2.45 643967 Ex. nut................................$2.45 SA643873 Exhaust Valve ..........$155.95 653191 Gasket, rocker ...................$9.75 SSR628260 Gasket, no-blow.........$9.90 SSR536413 Gasket, intake ............$0.60 642917-1 Intake hose...................$26.75 646283 Intake Valve .....................$89.75 654850 Piston IO-520 ................$164.95 630046 Piston pin .........................$45.50 SA534610 Push rod packing .........$1.15 652148 Ring set, steel cyl IO-520 ..$141.95
O-300
639640 Bearing set, rod (2 req.) $15.50 653851Camshaft follower tappet .$289.95 21477 Cyl base seal.....................$0.79 530917 Crankshaft seal .............$49.95 SA402151 Ex. stud.......................$3.85 22022 Ex. nut ...............................$1.23 646612 Exhaust Valve .............$195.95 530162 Gasket, rocker .................$5.90 627429 Gasket, no-blow ............$10.75 22250 Gasket, intake ...................$1.56 6465417-A1 Gasket set, moh ..$151.95 21185 Intake hose ........................$1.62 641792 Intake Valve (30) ........$65.75 646255 Piston ..........................$271.95 530830 Piston pin.......................$62.50 539840 Push rod packing ............$1.57 649632-A1 Ring set, steel barrel$34.50 625958 Springs outer ...................$8.50
O,IO-540
SSR72877 Camshaft follower .$130.95 SSR71481 Cyl base seal .............$3.35 13792 Crankshaft seal ...............$15.85 SSR31C-12 Ex. stud ....................$6.45 STD-1410 Ex. nut .........................$2.30 LW15473 Fuel pump, mech. ...$379.00 75906 Gasket, rocker, most .........$2.65 77611 Gasket, no-blow ................$7.70 71973 Gasket, intake ...................$1.46 SSR71569-1 Gasket set, moh .$357.95 69603 Intake hose 1-3/4 .............$7.50 73938 Intake Valve.....................$19.90 75089 Piston ............................$127.95 60828 Piston pin plugs ...............$11.50 SSR70310 Push rod packing .......$0.87 74241 Ring, comp steel cyl ........$39.80 SSR73857 Ring, oil ctl, steel cyl...................$31.75 LW11795 Spring, Valve, inner ...$17.50 LW-11800 Springs Valve, outer ...................$27.75
LYCOMING CYLINDERS
O-235C,E,H chrome stud .....$1,522.00 LW15318 O320H new assy $1,522.00 LW12427 O-360 new assy ...$2,139.00
LW12988 O540/HIO360 new assy ................................$2,738.00
PS BV
CONTINENTAL CYLINDERS
O200 new assy 654377A10 .$1,216.00
O-320
322
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Donaldson P10-4145, Fram CA-161-PL, Air Maze 13203 08-00721-1 Beech Baron - 95-C55 S/N TE-1 thru TE-451 except TE-50, 95-C55A S/N TE-1 Thru TE-451 Except TE-50, D55 S/N TEDonaldson P12-7996, CP-2004 452 Thru TE-492, D55A S/N TE-452 Thru TE-492, E55 S/N TE-768 Thru TE-1079, E55A S/N TE-768 Thru TE-1079 , 58 Air Maze 121128-2, 08-01024 S/N TH1-TH740 No sealing grease or gasket required for this application. Brackett BA-6210-1 Beech Bonanza/Debonaire - 35, A35, B35 S/N D2606 &UP, CBG35, 35-33, 35-A33, 35-B33, 35-C33, H35, J35, K35, M35, N35, P35, V35, V35A, V35B, S35, E33 all 225 H.P., E33A, F33, F33A, E33C, F33C, G33, 36, A36, A36TC, B36TC, Beech 35-380035-1-3-5-7 , CP-2003 G36, T-34 with STC SA1450SW. A45(T-34A) with STCSA1864SW, D45(T-34B) WITH STC SA1864SW, , A45(B-45) with Donaldson - P10-5304, P10- 08-00816-1 137627, Brackett - BA-7110, STC SA1864SW, A45(B-45) with SA1864SW, A45(T-34A) WITH STC SA1042GL, D45(T34B) with STC SA1042GL, BA-7210, BA-7410 A45(B-45) with STC SA1042GL. P/N C-P3276 is the install kit. Use P/N CP-2502 to replace gasket at annual. CPE-1957 Beech Musketeer - A23A, A23, A23-24, B23, 23 Brackett BA-104, Beech 169-3 08-07101 CP-1182 Bellanca - 14-19-3-A, 17-30 P/N CP-3276 Is the install kit. Use P/N CP-2602 To replace gasket at annual. Brackett BA-8110 08-00870 CPE-1957 Bellanca - 17-30A Brackett BA-104 08-00721-1 CPE-1957 Brantly B2B Fram CA161PL 08-00721-1 Brackett BA-4106, 140, CP-1150 Cessna - 120,Is the 150, 150A-M, A150K, A150L, A150M, 152, A152annual. Donaldson P10-7150, 08-00843 P/N CP-3274 install kit. Use P/N CP-2402 to replace gasket at Cessna C294510-0201 170A, 170B, 172, 172A-G, H, I, K, L, Q CP-1172 Cessna - 170,Is the install kit. Use P/N CP-2302 ToM, N, P, gasket at annual. P/N CP-3274 replace CPE-1173 Cessna - 172R, S Cessna - 180, (exception 1953-1955 models), 180A-H, 180J-K, 182, 182A-H, 182J-R, T182T S/N T18208001 AND ON, CP-1182 182T S/N 18280945 AND ON, 185, 185A-E, A185E, A185F P/N CP-3276 Is the install kit. Use P/N CP-2602 To replace gasket at annual. CPE-1202 Cessna - 182S, S/N >s 18280001 thru 18280944 CPE-1178 CIRRUS - SR-20, SR-22 No sealing grease required for this application. CPE-2175 CIRRUS - SR-22 with STC SA10925SC CP-2175 GREAT LAKES - 2T1A-1, 2T1A-2 CP-4423 ENSTROM HELICOPTER - F-28A CPE-1040 GRUMMAN - AG CAT G164B CPE-1957 LAVIA S.A. - PA25, PA25-235, PA25-260(PRIOR TO S/N 1477) Cessna C294510-0301, Donaldson P10-7172, Brackett BA-5110 Donaldson P198281, Fram 3559 Cessna 0750038-1-4, Donaldson P10-6150, Brackett BA-8110 Donaldson P19-8290, Fram CA3717 Brackett BA-111 BA-111 12009, P57A, AC-6486197 BA-101 CA151PL, A86A, AFP5 Brackett BA-105 Fram CA-161PL, Brackett BA-104 Brackett BA-4106 08-00902
08-07388-1 $207.95 08-00717-1 $211.95 08-00721-1 $219.95 08-00843 08-00902 08-01221 08-00843 08-00902 08-01031 $190.84 $182.95 $210.54 $190.84 $182.95 $208.69
CP-1150 LUSCOMBE - 8, 8A, 8B, 8C, 8D, 8E, 8F, T-8F P/N CP-3274 Is the install kit. Use P/N CP-2402 to replace gasket at annual. MAULE - M-4, M-4T, M-4C, M-4S, M-4-180C, M-4-180S, M-180T, M-4-220, M-4-220C,M-4-220S, M-4-220T, M-5-180C, Brackett BA-6110, CP-1172 MX-7-160, MX-7-180,M-5-210C, M-5-235C, M-5-210TC, M-5-220C, M-6-180, M-6-235, M-7-235 P/N CP-3274 Is the install Donaldson P12-6491 kit. Use P/N CP-2302 To replace gasket at annual. CPE-1178 MAULE - M-4-210, M-4-210C, M-4-210S, M-4-210T, M-5-210C No sealing grease required for this application. Brackett BA-111 Brackett BA-4106, CP-1150 MOONEY - M10the install kit. Use P/N CP-2402 to replace gasket at annual. P/N CP-3274 Is Donaldson P12-0494 M20D, M20G Fram 13219, Brackett BACP-1172 MOONEY - M20, M20A, M20B, M20C, CP-2302 To replace gasket at annual. P/N CP-3274 Is the install kit. Use P/N 6110, Donaldson P12-6491 Donaldson P10-4065 CP-1176 MOONEY - M20 E,F REPLACEMENT GASKET P/N-CP-2802 Brackett BA-6310 CP-1174 MOONEY - M20J (201) BRACKET BA-6210 CP-1175 MOONEY - M20K S/N 25-1000 & UP Donaldson P13-6287 MOONEY 600417-503, CPE-1179 MOONEY - M20M, M20R, M20S AM EDD4028, Donaldson P524257 Piper 454-118, Fram CACPE-1151 PIPER - PA-18 S/N 18-6964 and up O-320 122PL, Brackett BA-112 CPE-1040 PIPER - PA28R-180, PA28R-200, PA28R-200T, PA28R-201, PA28RT-201, PA28R-201T, PA30, PA-34-200, PA39, PA44Piper 460-630 180, PA44-180T Brackett BA-105 PIPER - PA23-235A, PA23-235B , PA23-250B, PA-24 S/N 1479 and up, PA24-180 S/N 1477 and up, PA24-250 S/N 1477 and up, Fram CA-161PL, Piper PRIOR TO S/N1477, PA28-140, CPE-1957 PA24-260, PA25-150, PA25-235, PA25-260 32-7640001 & UP, *PA32R-300, PA28-150, PA28-160, PA28-180 ,PA28-181,PA28RT460-632, Brackett BA-104, 201T, PA28-235,*PA32-260,*PA32-300 S/N *PA32RT-300, *PA32RT-300T, *PA32R-301 (SP), *PA34- PURO AFP-2, AC-6485710 200T, *PA34-220T, *PA36 W/CONT. *COVER PLATE CPE-0528 MAY BE REQUIRED WHEN REPLACING Brackett FILTER.
08-00896 $213.69 08-01020-1 $173.95 08-01263-1 $219.95 08-01032-1 $203.95 08-00717-1 $211.95 08-00721-1 $219.95
PIPER - J3, J3C-65, J3C-65S, J5A, J5A-80, PA-11, PA-11S, PA-12, PA-12S, PA-16, PA-17, PA-18, PA-18A, PA-18S, PABrackett BA-4106, CP-1150 18-105, PA-20-115 PA-20-135, PA-22-108,PA-22-135, PA-22-150,PA-22-160, PA-38-112 08-00843 Piper 460-638 P/N CP-3274 Is the install kit. Use P/N CP-2402 to replace gasket at annual. CPE-1956 PIPER - PA28-151, 161 REPLACEMENT GASKET P/N CP-2604. Brackett BA-16, Piper 560-679 08-01033 CP-2003 PIPER - PA-28-236, S/N 7311001 thru 7911282 P/N C-P3276 Is the install kit.Use P/N CP-2502 To replace gasket at annual. 560-854, P13-6602 08-00816-1 460-817 CP-3202 PIPER - PA-31-300, PA31-310, PA-31-325, PA-31-350, PA-32RT-300T 560-747 08-07405 P10-6590 Cessna C294510-0201 F150L, F150M, FA150K, FA150L, F152, FA152 CP-1150 REIMS/(Cessna) F150G, F150H, F150J, F150K,to replace gasket at annual. Brackett BA-4106 08-00843 P/N CP-3274 Is the install kit. Use P/N CP-2402 Donaldson P10-7150 F172E,F172G, F172H, F172K, F172L, F172M CP-1172 REIMS/(Cessna) - F172D, kit. Use P/N CP-2302 To replace gasket at annual. P/N CP-3274 Is the install CPE-1220 ROBINSON - R-44 CP-4422 ROBINSON - R44 II CPE-1104 ROBINSON - R-22 CP-2100 ROCKWELL COMMANDER - 100-180, 112, 112B CP-1172 SOCATA - TB9, TB10 P/N CP-3274 Is the install kit. Use P/N CP-2302 To replace gasket at annual. SOCATA - TB20, TB21, TB200 FOR THIS AIRCRAFT ONLY THIS FILTER SHOULD BE ORDERED FROM FACTORY CP-2003 ONLY. GASKET CP-122 MUST BE INSTALLED. P/N C-P3276 INSTALLATION KIT IS INCLUDED.USE P/N CP-2502 TO REPLACE GASKET AT ANNUAL CP-1150 TAYLORCRAFT - BF65, BF12-65, BFS65 P/N CP-3274 Is the install kit. Use P/N CP-2402 to replace gasket at annual. AMERICAN - AA-1, AA-1A, AA-1B, AA-1C, AA-5 CP-1150 TIGER AIRCRAFT/LLC/GULFSTREAMCP-2402 to replace gasket at annual. P/N CP-3274 Is the install kit. Use P/N CP-1960 TIGER AIRCRAFT / GULFSTREAM AMERICAN - AA5A CP-1958 TIGER AIRCRAFT/GULFSTREAM AMERICAN - TIGER AA-5B CP-1150 UNIVAIR - A-2, A2A (FORNEY) F-1, F-1A - P/N CP-3274 Is the install kit. Use P/N CP-2402 to replace gasket at annual. CP-1150 GLOBE/SWIFT - SWIFT GC-1A, GC-1B P/N CP-3274 Is the install kit. Use P/N CP-2402 to replace gasket at annual. CP-2010 WACO AIRCRAFT - UPF-7 Cessna C294510-0301 Brackett BA-5110 08-00902 Donaldson P10-7172 ROBINSON C771-1 08-00720-1 C-771-2 08-07380-1 ROBINSON A771-1 08-01021-1 Brackett BA-110 124748-019 Brackett BA-3910 08-05915 Brackett BA-5110 08-00902 Brackett BA-7110 Brackett BA-4106 Brackett BA-4210 AMS13202 Brackett BA-19 Brackett BA-4106 Brackett BA-4106 Brackett BA-4106 22756-B
$190.84 $195.46 $237.95 $223.95 $190.84 $182.95 $206.95 $228.95 $211.95 $199.95 $182.95
08-00816-1 $237.95 08-00843 08-00843 08-07307 08-01022-1 08-00843 08-00843 08-07389-1 $190.84 $190.84 $190.84 $210.95 $190.84 $190.84 $188.95
Challengers recharger kit includes non-aerosol bottles of air filter cleaner and air filter oil for recharging air filters. Restores airflow efficiency. P/N 08-05884 ........................... $14.95
If you do not see your application here, or for more CHALLENGER AIR FILTER ACCESSORIES, please call or VISIT OUR WEBSITE AT WWW.AIRCRAFTSPRUCE.COM
323
$54.85 BA4108 $74.85 BA24 $84.75 BA2405 N/A BA3805 N/A BA2705 $26.75 BA3 $72.50 BA8103-1 $28.75 BA11 $54.85 BA4108
324
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
325
AIR FILTERS
CM WP ME
Item Our P/N 08-00025 08-00026 These pleated paper aircraft induction air filters are manufactured in South Africa and are fully approved by the South African Dept. of Transport, Division of Civil Aviation. Strict quality control standards are enforced at all stages of manufacture. The filters feature aluminum frames and cured EA131 pleated elements with 96% micron rating. Rubber gaskets are waterproof, oil solvent, and chemical resistant. Mesh overlays are of stainless steel for enhanced strength, durability, and appearance. Not FAA approved at this time.
HA AP LG EP CS IN
3 4 5
P12-7996 (121128-2) 08-00019 TE946 thru TE1078 TH1 thru TH740 08-00020 P12-8219 (122601) 08-00021 P10-8700 P12-4439 (50-389070-23)
Tomahawk (PA38)
$98.75
5A 08-00022
P12-8167 (96-389005-1) 08-00023 TE1079 & after TE741 & after 08-00024 169-380035-7
$129.50
EL AV TO PS BV
5 Aircraft Type Cessna 150 Cessna 172 Cessna 336, 337A-H Cessna 172 RG Cutlass Cessna 177 Cessna P210N, R Cessna 182RG Cessna 182 Price $95.25 $96.00 $112.95 $105.95 $88.65 $126.95 $88.25 $132.95 $178.95 $198.95 $149.95 $122.95 $89.65 9 7 8 6
08-00032
125196
$108.95
08-00033
CA161
$82.00
4A 08-00003 C294510-0501 5 6 7 8 9 08-00004 C294510-0601 08-00005 C294510-0801 08-00006 C294510-0901 08-00007 0750038-4
08-00008 1250704-3 (Port) P206,A,B,C,D,E To S/N 64535 w/o Air T206,A,B,C,D,E Cessna 337 Cessna T310R
9A 08-00009 1250704-4 (Stb) 10 08-00010 1250846-1 11 08-00011 C294510-0501 12 08-00012 9910018-1 13 08-00013 9910018-2 14 08-00014 9910200-1 15 08-00015 9910141-1
326
AIR FILTERS
Filter for Continental for A-65 thru C-125*. ..............................................................................P/N A40599 ......................$73.50 Filter for Lycoming O-235, O-290, some O-320 (advise aircraft application) .........................P/N A40599 ......................$73.50 Aeronca 7AC, 11AC ................................................................................................................P/N 2-849 .........................$88.75 Carb. Intake Stud .....................................................................................................................P/N 24306 ........................$41.25 TCM Carb. Intake Pin ..............................................................................................................P/N 24308 ........................$20.50 *FOR NEW INSTALLATION - P/N 24306 & P/N 24308 ARE REQUIRED
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Our K&N Filters are the industry standard in excellence. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and provide secure attachment. These flanges can be stretched up to 1/8 (3mm) to fit in-between sizes. K&N Universal air filters are available in round, tapered, and oval designs, to fit just about any application. Use the dimensioned sketch and the selection chart to find the filter best suited to your application.
Part No.
08-01053 08-01273 08-04977 08-04980 08-04981 08-04978 08-01274 08-01275 08-04979 08-04976 08-04977 08-01278 08-01279 08-01280 08-04983 08-04984
Application
Rotax/Bing 36mm Mikuni 32mm Mikuni 34mm Kawasaki/Mikuni 32mm Mikuni 36mm Rotax/Bing 32mm Rotax/Bing 36mm Rotax/Bing 36mm Rotax 532/582 Dual Carbs Rotax 503 Dual Carbs Mikuni 34mm Rotax 503/532 Aerobatic carb. Rotax 912 Offset Rotax 814 Rd. Center Rotax/Bing 36mm Rotax/Bing 36mm
Throat
2 2-1/4 2-1/2 2-3/4 2-1/4 1-3/4 2-1/16 2-1/16 2-1/16 2-1/16 2-7/16 3-1/2 2 2-7/16 2-116 2-1/16
Length
2 4 4 3 4 2-1/2 4 4 3 3 4 4-1/2 2 5 3 3
Dia.
5-3/8 3-1/2 3-1/2 5 2 2 3 2 8-1/2 8-1/2 3-1/2 3-1/2 5-7/8 3-1/2 3 3-1/2
Style
Round Straight Round Straight Round Straight Round Straight Tapered Tapered Round Straight Tapered Dual Oval Dual Oval Straight Tapered Round offset Round Centered Round Straight Round Straight
Price $41.50 $28.25 $39.50 $103.45 $32.25 $35.85 $32.75 $36.50 $49.65 $49.85 $39.50 $28.85 $37.50 $29.75 $44.80 $35.75
Rubber end cap instead of chrome makes this filter less likely to create damage in the event of a prop strike. Also includes rubber boss for safety wire attachment. K&N Air Filter # SP2704 ........ P/N 08-06098 .. $24.85 K&N Air Filter # SP2706 ........ P/N 08-06099 .. $54.75 K&N Air Filter # RC-2314 ....... P/N 08-07291 $142.95 See website for engine applications.
K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements, providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.
6.5 oz. aerosol can - red ......... P/N F99-0504 ............. $5.95 8 oz. squeeze bottle - red ........ P/N F99-0533 ............. $5.85
This is the only cleaner formulated to clean K&N Filtercharger elements. The use of any other cleaning solution will void the filters warranty, and quite possibly could damage the cotton material. K&N Cleaner works to dissolve the dirt build-up and old filter oil, and can be washed away with water. It is biodegradable and safe on paint, chrome, cast aluminum, plastic, rubber, and vinyl when used as directed. Complete instructions on the bottle. NOTE: Do not use on polished or anodized aluminum. 12-fluid oz. squirt bottle ................................. P/N F99-0606 ..........$8.50
K&N Air Filter Cleaner is the only cleaner recommended to clean K&N Air Filter elements. K&N Air Filter Cleaner works to dissolve dirt build up and old filter oil and can be washed away with water. It is environmentally friendly and safe on paint, chrome, cast aluminum, plastic, rubber and vinyl when used as directed (do not use on polished or anodized aluminum). Complete instructions on bottle. 12 oz. Spray ............................... P/N 05-01944 ............. $8.50 1 Gallon Refill ............................. P/N 15-05451 ........... $26.50 5 Gallon Pail ............................... P/N 08-07461 ........... $81.40
K&N Sealing Grease provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N sealing grease is not to be used on clamp-on filter elements. 6 oz. Squeeze Tube. 8 oz. squeeze tube - black .........P/N 08-01093 .. $8.65
K&N Recharger kits contain K&N air filter cleaner and air filter oil for recharging any K&N Filtercharger Air Filter. Restores air flow efficiency so your K&N air filter performs like new! P/N 08-00722 ............................ $11.75
327
RAJAY AND GARRETT TURBOCHARGERS, PRESSURE RELIEF VALVES, WASTEGATES, AND CONTROLLERS BY HARTZELL
Our Janitrol heaters, rebuilt right at the factory by Janitrol Heater Products, a division of Hartzell feature new CermaKote combustion tubes and a more efficient, lightweight permanent magnet blower motor. These heaters are rebuilt to factory new tolerances and upgraded to the latest model configuration with a new serial number. These heaters are not affected by FAA AD Note 96-2007. Three year, 1000 hour limited warranty, 1500 hour TBO. CALL FOR PRICING!
ENGINE SAVER
Protect Your Engine With the Tempest EPS. All engines accumulate moisture when they are not run everyday. Moisture will oxidize and create rust in the engine causing potential damage as well as faulty oil analysis. AA1000 EPS pumps dry air into the engine oil filler cap and removes the moisture already in the engine. Continuous operation will prevent any additional moisture from accumulating. Removal of the moisture preserves and protects your engine. 110V.....................P/N 08-07192 ..........................$179.00 220V.....................P/N 08-07383 ..........................$309.95
ACCESSORIES
Replacement Desiccant for AA1000 EPS (1 lb) P/N 07-03400 ............................$16.75 Replacement Desiccant for AA1000 EPS (1/4 lb) P/N 07-00731 ..............................$4.90
AIM-A-SQUIRT
An oil supplement for all piston engine-powered aircraft owners and operators worldwide. AvBlend produces a wetting action that allows lubrication to penetrate the pores of an engines metal surfaces. Providing critical lubrication at start-up, AvBlend helps prevent accumulation of combustion chamber areas. Wear is reduced, engines stay cleaner and combustion chambers stay properly sealed. Proper cylinder sealing is essential for achieving optimum peak pressure and design-level output. FAA approved. 4-cylinder engines require 1 can at each oil change, and 6 cylinder engines require 2 cans. 12oz. can ..................P/N 08-05470 ...........$14.50 1Case (24 cans) .......P/N 08-05470-1 ......$319.00
#10-27165 - Factory recommended lubricant for bearings in Bendix magnetos. 1 Lb. Can......... P/N 10-27165 ........................... $62.75 #10-391200 - For use on distributor block bushing. Provides proper shaft lubrication. 8 oz. can.......... P/N 10-391200 ......................... $64.50 1 oz. tube ........ P/N 07-02500 ............................. $3.95 #10-39140-0 - Distributor block bushing coating P/N 10-39140-0 ...................... $151.95 #10-86527 - High temperature breaker/cam lubricant P/N 10-86527 ........................... $43.85
Engine Preservation Kit: recommended by engine manufacturers for storage of an engine longer than 90 days. Everything you need for long-term protection of your Lycoming & Continental engine. 4 Cylinder ..................P/N 08-07085 .........$180.00 6 Cylinder ..................P/N 08-07086 .........$270.00
328
A non-hardening sealant. Recommended for heating hose connections, close fitting metal parts and threaded connections. Resists water, gasoline, acids and alkalies. Temperature range -65 to 400F., pressures to 5000 PSI. Conforms to MIL-S-45180B, Type III. 4 Oz. Can #3H ...... P/N 09-28500....... $8.75 1 Pint Can #3D ....... P/N 09-28600..... $13.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These kits from Real Gasket Tennessee replace problematic pushrod tubes of continental engine models: A-65, A-75, C-75/85/90/125/145, 0-200, 0-300 and GO-300. The installation does not require loosing or removal of the cylinder and converts it to an independently serviceable spring loaded pushrod tube system, similar to IO-470, IO-520, and IO-550 continental engines. It also allows access and service to the lifters. The kit is designed for easy installation and uses real gaskets FAAPMA pushrod tube seals as used in the continental IO-470, IO-520 and IO-550 engines. For certified aircraft engines, form 337 is required. 1-cylinder kit ........P/N 08-00802 ......... $78.75 4-cylinder kit ........P/N 08-04444 ...... $249.00 6-cylinder kit ........P/N 08-44444 ...... $374.95 RG-17794-S/12 ...Pushrod Tube Seal ..............P/N RG-17864-S/12 ...Pushrod Tube Seal ..............P/N RG-10366 ............Oil Pan Gasket .....................P/N RG-17794-S/12 ...Valve Cover Gasket .............P/N RG-17794-S/12 ...Crankcase Cover Gasket .....P/N FAA Approved
Ready-to-use engine cleaner in convenient aerosol or squirt can. EB-1, 16 Oz. Aerosol..............P/N 09-29700 .......$4.70 Two-layer room temperature carbon digester and paint stripper. No flash point. Safe on all metals. Simply soak and pressure rinse or solvent rinse. 5 gal. pail contains parts soaking basket. HS-3, 1 Gal. Can (11 Lbs.).....P/N 09-29900 .....$31.75 HS-5K, 5 Gal. Pail w/ parts basket (Wt. 56 lbs., truck shipment reqd) ................................P/N 09-30000 ...$169.95 Factory-direct shipment on 50 gal. drums of Gunk and Hydro-seal. F.O.B. Charlotte, N.C.
08-00779 .......$4.15 08-00780 .....$52.25 08-00781 .....$31.75 08-00782 .......$9.90 08-00783 .....$38.95
LYCOMING TO-360-C,F, TIO/TIGO-541 Valve Cover Gasket (8 holes) P/N 08-07384 ................... $9.75
Lycoming Magneto Gasket model # LW12681. For Lycoming 0320 all letter designations EXCEPT the H series. P/N 08-00285...............................$1.80
Prevents corrosion and seizing of metal parts. Assures leakproof, pressure tight connections. Unaffected by water, oil, gasoline. Light Wt., #T20-66, 1 Lb. Can .......... P/N T20-66 ... $17.75 Medium Wt., #T25-66, 1 Lb. Can ..... P/N T25-66 ... $11.50
TITESEAL
LOCTITE High Temperature Gasket Sealant is a slow drying viscous paste. It remains pliable and flexible and is designed to seal flanges, threaded connections and fasteners at temperatures from -45 C to +315 C. It can be effectively applied to cork, paper, plastic and metal surfaces. Typical applications include sealing gaskets, flanges and threaded connections, aircraft heating systems, manifolds, pipe fittings, steam lines, gear boxes and cover plates. ................................ P/N 09-28425......$18.75 Seals and repairs a wide range of gaskets. Fills in uneven flanges surfaces. Seals pipe fittings, air ducts, boilers, plumbing connections and threaded assemblies. Dries fast, sets hard for sealing permanent or rigid assemblies. Easy to apply. Improves gasket sealing power, adds reliability to rigid or permanent assemblies. Eliminates delays. 3 oz., Tube, #1B ..... P/N 09-28415....... $5.50 11 oz, Tube, #1C.... P/N 09-28430..... $11.75 A non-hardening, heavy-bodied, pliable sealant for semipermanent assemblies. Use on threaded assemblies, over plates and hose connections, metal-to-metal applications. Temperature range -65 to 400 F., pressures up to 5000 PSI. Apply with putty knife or stiff bristle brush. Conforms to MIL-S-45180B Type II. 3 Oz. Tube #2B ...... P/N 09-28420...... $4.90 11Oz. Tube #2C ..... P/N 09-28400.....$12.25
Used worldwide in the automotive, aircraft and marine industries Liquid sealant designed to meet rigid requirements of OEM specifications. Non-hardening and resists extreme temperatures. Seals all gaskets and threaded connections. Prevents corrosion of bolts, studs and fitting threads. Resistant to gasoline, oils, steam, salt-water, antifreeze and propane. Withstands temperatures from -50 F to 400 F. 4oz. .................. P/N 08-07218 ......................$7.75 16oz. ................ P/N 08-07217 ....................$12.65
Standard for break-in on new or overhauled engines and for carbon removal from cylinder heads, piston rings, valves, etc. Mix with regular oil for perfect engine operation to -20F. Lubricates tight nuts, control hinges and landing gear. Dust repellent. 4 oz. ...................... P/N 09-27515 ................. $3.95 Qt. ......................... P/N 09-27500 ................. $8.85 Pint......................... P/N 09-27505 ................. $7.85 Gal. ....................... P/N 09-27600 ............... $36.75
For speedy help in removal of rusted or frozen studs, nut and bolts; frees up cables, slides and linkage; unequalled wherever a lubricant and penetrant are required. Lasting lubricating qualities. 8 Oz ..................... P/N 09-39608 .......................$5.75 32 Oz ................... P/N 09-39632 .....................$16.90
329
ENGINE PREHEATERS
RED DRAGON ENGINE PREHEATERS E-Z HEAT AIRCRAFT ENGINE PREHEATERS
CM WP ME HA AP LG EP CS IN
MH310 This model is the same as MH-300 except it uses 115 VAC to power the 08-04305 $348.00 fan. Wt: 17lbs. This Red Dragon preheater is a cart style self contained preheater. Includes preheater, cart, battery box, fuel cyl- 08-04315 $456.00 inder, and elbow. Excellent for FBOs. Wt: 58lbs. MH300 Model Description Part No. Price Preheating engines for winter operations is at best a miserable chore and at worst can be a disaster for the plane, the pilot & flight operations - until the development of the E-Z Heat Aircraft Engine Heater. The E-Z Heat was designed to provide very efficient engine heating for virtually all propeller driven aircraft. The heaters consist of a flexible synthetic pad that easily conforms to the contours of the oil pan. This pad will heat 12 qts of oil from -40 to +60F in an hour while using approximately 300 watts of electricity. The heater is 1/32 thick. which enables the immediate heat transfer from heater to engine. The heaters are thermostatically controlled, so leaving them plugged in overnight means the plane will be ready to go in the morning. Normally, complete pre-heating takes only 3-5 hours for the entire engine to be nice and warm. With this new lighted plug, the owner simply needs to look out the window or peek in the hangar to see if they remembered to plug in their E-Z Heat engine pre-heater. Molded into the male plug end is a newly designed light emitting diode (LED). This LED allows the operator to visually recognize if there is electrical power to the preheat system even from a distance. FAA approved for certificated aircraft. End your cold weather starting problems and reduce premature engine wear with the installation of our proven Specifications: Power Consumption: 300 watts or less / Thermostatically Controlled Power Requirement: 110/120 volts (models 441 and 540 are available in 220 volts). Installation: The adhesive is already on the pad. All you need to do is peel and stick it on! (excluding model 470) Preheat Time: 3 to 5 hours on cold soaked engine, although, since unit is thermostatically controlled, it may be left on overnight, or all the time. Cowl covers and prop covers are recommended for extreme cold weather, they also reduce preheat time. Lite Brite Plug: With this new lighted plug, the owner simply has to look out the window or peek in the hangar to see if they remembered to plug in their E-Z Heat engine pre-heater! (excluding model 470) Weight: Only 9 ounces! Heat Transfer: Convection/conduction, the safest way of heat transfer available. No flames or glowing elements are potential fire hazards. P/N 07-00756 07-05315 07-05100 Application Cont. A-65 to o-200 (round) Cont. A-65 to 0-200 (rectangle) Cont. C-125 to 0-300, E-165 to E-225, IO-360 to Tl0-360 Lyc. 0-235, 0-290, 0-320* Cont. 0-470, l0-470, 0-520, l0-520 Lyc. 0-320*, 0-360, l0-360, 0-540, l0-540C, D, T10-540C O-470, IO-470, O-520, Heater # 260 270 440 Price $149.95 $149.95 $149.95
For quick engine starts in cold weather. Propane heated air is blown directly into engine compartment by a 12V fan (can be used to heat cabin, thaw ice or warm hanger).12V comes from either plane or car battery with no appreciable electrical drain. Easy-to-operate electric igniter allows you to ignite heater with a push of a button. Entire unit weighs only 14 lbs. 100% safety control stops fuel flow should flame 08-04300 $317.00 go out. Complete with 5ft. of pressure propane hose, excess flow valve, regulator, safety control and 10ft. power cord with alligator clips to attach to battery. All UL approved. Now includes high limit safety control package - provides total protection from over-heat situations and will effectively shut down fuel upon an over-heat situation. Use standard propane bottles.
EL
H175
AV
--
TO PS BV
----
Carrying Case - Strong Plastic Case with lock, for model MH300. (20.25x 08-04320 $46.90 9.5x 9.5) 12V Cigarette Lighter Adapter Plug 08-04330 $16.95
Lyc. IO-360A & C Series Cont. 0-470, l0-470, 0-520, l0-520 l0-550 Lyc. 0-540, TIO-540 (except C), l0-720
--
Propane Quick Disconnect set - For Rapid Connect & Disconnect of Fuel 08-04340 $22.00 Line from Propane Bottle w/o Tools (even under pressure) Propane Bottle - Std. Refillable Bottle (5 Gal. Cap. or 20 Lbs.) Supplies Min. 08-04351 $55.00 2 Hours of Heating. (Empty) Soft Carring Case - This soft carring 08-01218 $21.95 case is for 115V preheaters only. Red Dragon Disposable Cylinder Adapter - Has a shut off valve and is 08-01295 $26.85 disposable usually for 1 preheat.
----
The E-Z Heat Engine Preheater system fits the Rotax motors and many other light sport aircraft on the market today. The system consists of two heater pads connected with a common Light Bright power cord. Installation is easy by peeling and sticking a pad on both the sump and on the oil tank to assure the engine gets the proper amount of heat. P/N 07-01860 .........$149.95
330
ENGINE PREHEATERS
Constructed of solid aluminum, known for their dependability, performance, and overall value. An improved design saves time and money by allowing easy transfer to other engines or reinstallation after overhaul. Ea. 08-04425 kit includes 2 adapter plates, 1 flat and 1 curved (curve fits Continental sumps).The applicable adapter 08-04425 plate is simply screwed to the heater plate. This assembly is then adhered to the engine sump with thermally conductive adhesive (included). When necessary to remove the preheater, simply remove 4 screws! Specifications: 330W (08-00425) or 220W (08-00372). Thermostatically controlled 170200F. Thermal fuse to prevent overheating should thermostat fail and heater become dislodged. FAA/PMA approved for over 600 engines. 2-yr, no hassle warranty. Application: Continental (except kidney shaped)5x4-3/8x7/8. P/N 08-04430 ................$199.95 Application: Lycoming (except as below), Continental (except kidney shaped), Franklin, Garrett, & Marathon. 2-yr. warranty. Size: 5x 4-3/8x 5/8 (7/8 w/curved plate) P/N 08-04425 ................$189.95 Application: Lycoming IOs w/air intake on bottom (IO 360A1A, for example); for engines where a smaller footprint required; typically mounts on side of sump. 2-yr warranty. Size: 5x 2-7/8x 5/8 P/N 08-00372 ................$189.95 Replacement Parts Replacement Adhesive ....................... 08-01054 .........................$12.50 Replacement Adhesive Kit ( includes Applicator, Tie wraps, and Safety Wire) 08-01055 .........................$15.90
Compact: NC5A = 6 x 17.25, NC5B = 6 x 15. Lightweight: 6lbs, 6oz average weight. Multi Fuel: *100LL aviation gas - Leaded or unleaded auto gas - White Gas - Kerosene . Diesel - JP4 and JP8 jet fuel. Approximately 20,000 BTU: Type of fuel and pressure in bottle affect output. Shockcorded legs: Slide the legs away from the clips and they seat themselves in the base. Stainless Steel Burner Chamber. No Battery or Other Electrical Power Required. Fast Setup and Takedown - Even with mittens on!. No Tools Required 6 X 17.25 ............ P/N 05-04767 ..........$594.00 6 X 15 ................. P/N 05-04768 ..........$594.00
CM WP ME HA AP LG EP CS
Kennons insulated engine covers are custom made fro the specific year, make and model of aircraft for a a snug fit. Kennon makes it own engine blanket material using a bonded fiberfill that doesnt need to be quilted to stay in place, which can destroy the loft and put thousands of needle holes in the cover where heat can escape. The outer shell is made of red, blue, or black polyester rather than nylon, increasing the useful life of the cover and the inner layer is fluorescent orange which can be used as a signaling device in the event of an emergency. Flaps for oil doors to check or fill the oil and cowling inlet flaps for preheating purposes can be added for $25.00 each. Insulated prop and spinner covers are also available. 2-Seat A/C (sml) . 07-00983..$395.95 4-6 seat A/C (reg.).. 07-00984 .$409.95 Twin Eng. A/C ... 07-00985..$769.99 Spinner Cover . 07-00987 ...$98.95 Prop Cover ........ 07-00988....$49.95
HotStrip is thin and lightweight like a silicone pad, but made of steel for maximum durability. Works either as a stand-alone sump heater or integrated with the Hot Band Cylinder Heating Systems. Bonds to the bottom or side of oil sump and electrically heats the oil. Features dual heating elements for redundancy. System includes two 100W elements thermostat, and power cord. FAA Approved for: Lycoming 0-235; All 290, 320, 360 series; All 435, 480, 540, 541 series; Continental IO-346; All 300, 600 series; E-165, E-185, E-225, All 470, 520, 550 series. P/N 08-00688 .........$189.00
IN EL AV
SAFE-HEET is a thin flexible pad that is bonded to the engine oil sump. The kit is complete with materials and step-by-step instructions. A log book entry is all that is required for permanent installation; No S.T.C. or 337 form required. There are no airframe modifications required. SAFE-HEET can be used with a timer or the 707 temperature controller, and uses standard 110 A.C. voltage. We recommend using the SAFE-HEET 707 Temperature Controller to cure the adhesive for faster installation. MODEL 700 Dimension: 4 x 4.................. P/N 05-04420 ..........$158.50 MODEL 720 Dimension: 4 x 7.................. P/N 05-04421 ..........$158.50
The Reiff preheat system for Rotax 912 and Rotax 914 aircraft engines is an engine-mounted electric preheat system designed for easier cold-weather starts. The preheat system consists of a 100-watt metal hot strip element, which is epoxied to the bottom of the crankcase, and a 50-watt band heater that is clamped to the oil tank. The Reiff is FAA-approved, and includes a thermostat to keep the oil from exceeding 150 F. 110V. ........ P/N 08-06219...........$268.75 220............ P/N 08-06219-1 .......$268.75
TO PS BV
331
Preheat system for Rotax 912/914 series engines. Kit contains heating elements for each cylinder, crankcase, and oil sump. P/N 08-07395........................$642.00
Preheat system for Jabiru 3300 engine. Includes heating elements for each cylinder and oil sump, complete wiring harness and installation hardware. P/N 08-07088........................$574.95
Heated floor mats come in matched sets of two with a total heat output of 500 watts. They are interconnected with a harness and contain a thermostat in the power cord for temperature control. Each mat is 12 X 18 in size. P/N 08-07396........................$634.00
The RANS aircraft heater is the answer to the winter flying chills. It is very lightweight, inexpensive and installs easily in just two hours. This heater utilizes ram air & the heat off the engine muffler. Operation is simple. Slipstream air is forced through the heater inlet, passing over the muffler, picking up the heat and delivering it to the cabin or pod via an Aeroduct hose. Contains no moving parts. Fits Rotax mufflers P/N 05-17400 .........$209.95
NEAT HEATER
STAY- WARM Engine Saver will keep your oil in the sump at a constant temperature of 80 to 100F., allowing for immediate circulation on start up. There is no installation required since all you do is take out your engine dipstick and insert the STAY-WARM Engine Saver in its place and simply plug into a 110V outlet. (220V adapter available) Prior to flight simply remove and re-insert the engine dipstick. It only uses 90 watts, or the equivalent of a light bulb, so there is no fear of burning the oil and inexpensive to keep in your oil sump plugged in at all times, which is recommended for best results. The one size fits all 24 stainless steel tubing is semi flexible to fit most Continental and Lycoming 4 and 6 cylinder engines (does not matter if it is too long, as the heating element is at the bottom). P/N 12-02830 ...................$36.50
A neat and compact, powerful heater system for your Light Sport Aircraft! Never fly cold again. Installs quickly and easily in any aircraft with a liquid cooled power plant. Specifically Designed For the Rotax 912 and 582. Features: Powerful 300 CFM Fan Draws Only 3.4 amps Simple on/off controls Completely Shut Coolant Off In Summer Tested, Proven Design to 250 Deg at 25 psi. Infinite Mounting Possibilities Safe and Reliable Easy to Install/Service One Year Parts Replacement Warranty
Specifications: Dimensions: 7.5 x 6.75 x 3.75 Weighs only 6 lbs pounds Neat Heater .........................P/N 08-07376 ........$393.95 Neat Heater Install Kit .........P/N 08-07377 ........$197.95
332
Tempest Oil Filters feature a MAGNETIC secondary filtration system that attracts steel particles too small to be caught in the filter media.* Base Plate Thickness: .187 * Burst Pressure: 700 psi * Media Size: 311 sq. in. * AA48108 & AA48109: *Bypass Relief Valve TCM specs: 12-14 psi *Patented PC Housing.
Filter No. Our Part No. AA48103-2 08-01266 AA48104 08-01267 AA48162 08-48162 Cessna 162 LSA Price $16.75 $16.75 $17.75 Filter No. AA48108-2 AA48109 AA48110-2 AA48111 Our Part No. 08-01268 08-01269 08-01270 08-01271 Price $16.75 $17.50 $16.75 $16.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aircraft Model E33, F33, A35 thru S35 120, 140, 170, 172, 180, 182, 185,205,210, 310 C thru Q, 310R M20, M22 PA-18, PA-22, PA-23, PA-24, PA-25, PA-28, PA-30, PA-31, PA-34, PA-60 Price $21.75 $21.75 $21.75 $21.75 Price $21.75 $21.75 $20.75 12 Pack 08-00905-12 08-00906-12 08-00907-12 08-00908-12 12 Pack 08-00909-12 08-00910-12 ----
Filter P/N CH48109-1 CH48110-1 CH48110-1 CH48110-1 Price $247.95 $258.95 $257.95 $258.95 Price $247.95 $259.95 ---
Filter P/N CH48103-1 CH48104-1 CH48108-1 CH48109-1 Filter P/N CH48110-1 CH48111-1 CFO-100-1
The new filter has all the features which have made the Tempest oil filter so popular, including the magnetic secondary filtration system, and higher burst pressure. Full Can Thickness:.019. Base Plate Thickness:.100. Burst Pressure:275-325. Media Size:118 sq. in. P/N 08-07226 ............$19.95
FM engine mounted oil filter adapters eliminate the need for oil screens and provide increased filtering capabilities for longer engine life. Being engine mounted with no external lines, they reduce mess during oil changes and increase the time between oil changes. Includes adapter, filter, gaskets and STC. (CO-300 Pictured). Note: Tempest filters are included with FM adaptors. Price listed is for one adapter each. FM Model Aircraft Application Engine Application Part No. Price
The remote mount oil filter kit by Airwolf Filter Corp. replaces the Lycoming oil screen and housing allowing every aircraft to have an oil filter and to locate it on the firewall where its easy to get to. The adapter takes up no more space on the engine than the original part, so even the tightest installations can benefit from it. Your Vernatherm and oil temp bulb are reused and transferred directly to our adapter, everything else is included. Universal STCd kit fits any Lycoming powered Single/Multi engine airplane less than 450hp. All other STCd for specific aircraft. Hoses not included unless where indicated. Perfect for Tight Installations in: * Avion
* Aeronca * Bellanca *Beech *Cessna *Cozy MK-IV * Glasair * Grumman * Lancair *Long EZ *Maule *Mooney * Piper * Pitts * RV *Skybolt *T-18 *Vari-EZ * Velocity Fits Lycoming Series Engines: 0-235, 290, 320, 340, 360, & 540
Application Lycoming Filter Relocation Kit - Requires existing Lycoming 77852 Spin-on adapter. Application does not include helicopters. STCd Pratt & Whitney R985 Kit P&W R985 Kit, Stearman P&W R1340 Kit, T-6/Harvard Gorilla Pump for radial engines with slip on fittings. P&W R1340 Kit, T-6/Harvard Gorilla Pump for radial engines with Aeroquip flare type fittings. AFC-K015-D P&W R1830 Kit, DC-3/C-47 AFC-K015-E R985 Kit, Beach-18, Staggerwing, DGA-15 P&W R1340 Kit, Otter AFC-K015-G P&W R985/1340 Kit, AG-Cat AFC-K015-H P&W R1340 Kit, AT301/401/501 R1340 Kit, Thrush/S2D (Snow) AFC-K015-L P&W R985 Kit, FC-K015-K P&W R985 Kit, Weatherly ; Gorilla Pump for radial engines. AFC-K016-A - Curtis Wright R755 Kit [Small Radials] Gorilla Pump for radial engines. Part No. Price 08-00038 $535.00 08-00039 $914.00 08-00995 $816.00 08-07385 $913.00 08-07386 $798.00 08-00997 08-00998 08-00999 08-01001 08-01002 08-01003 08-01004 08-07297 $1,295.00 $815.00 $914.00 $914.00 $909.00 $914.00 $811.00 $927.00
T.A.F.-L
Cessna 120, Cessna 140, Cessna 150, Luscombes, Taylorcrafts, Cubs Cont. C-75Note: Will only for Cubs 12 C-85-12 with pressure cowls (totally 08-00631 $248.95 O-200 encloses the engine). Will O-200A not work on Cubs that cylinders stick out through the cowling. Cont. C-125, C-145, CO300 Cessna 170, 172, Globe 08-00632 $329.95 Swift, Maule 08$417.00 00633*
CO-300
Cont. O-470, Bellanca Viking, Cessna C6LC-S Cont. IO-470, 182, 55 series Beech Cont. IO-520 Baron Cont.O-470 IO-470, IO520 Cessna 205, 206, 207, 210,310, Beech Bonanza & Debonair, Navion, Meyers, Twin Commander,Widgeon
08-07298 $523.00
AFC-K016-B - Curtis Wright R1820 Kit [T-28]; Gorilla Pump for radial engines. 08-07299 $995.00 AFC-K016-C Curtis Wright R1820 Kit [Sikorsky S-58] 08-07300 Gorilla Pump for radial engines. AFC-K016-D Curtis Wright R1820 Kit [DC-3] 08-07301 Gorilla Pump for radial engines. AFC-K016-E Curtis Wright R1820 Kit [Grumman Tracker] 08-07302 Gorilla Pump for radial engines. Lycoming Homebuilt Kit 08-05605 STCD Husky Kit AFC-K005 08-05635 STCD Super Cub Kit AFC-K006 08-05630 STCD Universal Lycoming Kit 08-05660 STCD Lycoming Kit-Fits all with Single Drive,Dual Magneto Engines. 08-05665 STCD Lycoming Kit - Fits All IO-720 Engines 08-05670 STCD Universal Continental Kit - Fits A50, A65, A75, A80, C75, 08-05675 C85, C90, C125, O-200, & IO-240 Engines. STCD Continental Kit-Fits C145,O300,GO300,&IO360A,C,D,G,H,J,K 08-05680 STCD Continental Kit (O470, IO470, IO520, TSIO520, GTSIO520, 08-05685 & IO550 Engines) STCD Continental Kit (O470-11 & -15 Military Engines used on T34 08-05690 & Cessna 305 Birddogs.) STCd Continental Kit - Fits E-165, E-185, E-205, E-225 08-05700 STCD Continental Kit (TIO360, IO520BA, C, M, TSIO520 B, D, E, J, 08-05800 K, L, N, U, BE, VB, WB & IO550B, C Engines) STCd Continental Kit - Fits W-670 Radials(Stearman) 08-05805 STCD Continental Kit - Fits W-670 Radials (Waco) 08-05810 STCD Franklin Oil Filter Kit 08-05815 Replacement Filter Standard Length (Champion oil filter) CH48108-1 Replacement Filter Long (Champion oil filter) CH48109 $1,234.00 $1,234.00 $995.00 $474.00 $1,029.00 $798.00 $524.00 $528.00 $575.00 $528.00 $519.00 $524.00 $595.00 $544.00 $724.00 $535.00 $531.00 $895.00 $21.75 $21.75
C6LC-L
08-00634 $417.00
C6SC
Maule, Cessna 172 Hawk XP, Cessna 337, Cessna 336, Cessna 0-2, Mooney Cont. IO-360 08-01038 $427.95 M20-K, Piper Turbo Arrow II & IV, Piper Seneca II, PA-34-200T, Cessna 175
Cont. O-47011, Cont. Cessna L-19 Bird dog 08-01037 $499.95 O-470-15 * WILL NOT FIT AIRCRAFT WITH FLOATS C6LC11/15 825-701(825-703) Oil Filter - Rotax 912. Original factory replacement filter. P/N 08-06100 ...........................$19.95
333
Makes aircraft oil changes easy. The hand actuated valve when attached to the oil drain port permits engine oil changes from the ground without removing the engine cowling. The spring loaded E-Z Drain valve cannot be accidentally opened. Actuation of the valve requires a combination push/twist motion. It also contains a dual seal arrangement which combines both an O-ring & metal-to-metal seal to prevent accidental leakage of oil through the valve. FAA Approved for use on the engines listed. Incorporates fine Aeroquip quality hose. Installation eligibility listing furnished with each unit. Engine Application Thread Price Cont. C-90, O-200, GO-300, IO-360 AE99950G TSIO-360, O-470, IO-470 TSIO-470, 5/8-18 $219.95 IO-520, TSIO-520, GTSIO-520 AE80666H Cont. O-300, late C-145 1-18 $687.50 AE80664H Lycoming Engines 1/2NPT $169.95 Valve O-Ring, All Models ...... MS28775-011 ...........................$0.23 Ea. Interface O-Ring .................... AE99950G MS28775-113........$0.26 Ea. AE805555H MS28775-118 ......$0.21 Ea.
Not to be used on Piper Models PA-28R-200, PA-28R-201, PA-28RT-200.
Part No.
This 90, spin on oil filter adapter is FAA approved for replacement of existing oil pressure oil 8 amp alternator screens or spin-on filter adapters on Lycoming 0-235; O, IO, LIO, AIO, AEIO-320; O, IO, LIO, HO, Return from oil coolHIO, TIO, AEIO-360; O, IO, HIO, er. Must use 45 fitting to clear oil filter TIO, LTI, AEIO-540 & IO-720 series engines. It is CNC milled To oil cooler from solid aluminum billet and fits perfectly without interference with the magnetos, vacuum pump, or the mechanical tach drive. Adapter kit comes complete with new gasket, new aluminum washer for the vernatherm, new copper gasket for the oil temperature sensor, sealant for the gaskets, & new Lycoming bolts for mounting the adapter. Wt: 4lbs. Uses CH48108 or CH48109 filters. Adapter Kit w/ STC (for certified A/C) ........... P/N 08-00195 .......$447.00 Adapter Kit w/o STC (for homebuilt A/C) ...... P/N 08-00196 .......$385.00 Required Items: B&C Oil Temp Probe Adapter ....................... P/N 08-07092 .........$14.50 B&C Vern-a-therm Opening Plug .................. P/N 08-07093 .........$49.75
Changing engine oil has never been easier. With the Saf-Air oil Drain Valve, no wrench is needed to remove the drain plug. A simple push and turn of the Saf-Air valve locks it in the open position. The valves are made completely from aluminum & stainless S6250 steel parts. FAA & PMA APPROVED Part No. Engine Application Thread Price S6250 Cont. (same as Aeroquip AE99950G) 5/8-18 $79.50 S1000 Cont. (same as Aeroquip AE80666H) 1-18 $85.75 P5000 LYC (same as Aeroquip AE80664H) 1/2NPT $85.75 M12175 ROTAX 912, 914 12mm x 1.75 $38.75 S7516 Cont lO-520-E 3/4-16 $84.50 P7500 Franklin Engines 3/4 NPT $84.75 S5020J Jabiru 2200 / 3300 1/2-20 $38.75 M20150 Subaru 2.2L / 2.5L 20-1.50mm $41.50
F62
Perfect for a close clearance engine oil drain application such as on the Piper Arrow. These low profile oil drain valves are designed to clear retractable landing gears & other restrictions. The valve is very affordable and can be rebuilt. It is a simple procedure to sample or drain hot oil. The valve is made from 360 brass & 302 stainless steel. FAA & PMA APPROVED. Mfg. No. Part No. Engine Application Thread Price F62 05-00981 Continental 5/8-18 $114.95 F10 05-00982 Pratt & Whitney 1-18 $114.95 F50 05-00983 Lycoming 1/2-18 NPT $114.95 This is exactly what Lancair IV owners have needed for their continental engine! Forget the huge mess when changing oil! Engineered to fit and will not interfere with the retracted nose strut! Finally, makes oil changing simple and easy in your Lancair IV! Fits any 5/8"-18 thread drain plug. Brass and steel construction; yellow zinc plated dust cover provides protection between changes. Drains via hose directly into container. P/N 08-01298 ...........$97.50
All Engines with Dual Magnetos. Includes Converter $671.00 Plate Assembly and Does Not Include Filter
All Lycoming spin on oil filter adapter kits above include adapter, oil filter assembly, adapter plate, gaskets, & attaching hardware. LW-14969 kit also contains oil cooler bypass valve assembly, 2 elbows, & 2 oil seals for oil cooler installations.
Designed to provide sport plane builders and owners several improvements over the standard Lycoming oil screen or filter hardware. This device locates the filter in the vertical plane for two unique advantages. 1) The filter is now in free space, permitting installation with tight engine to firewall clearance (that would otherwise be limited to an oil screen). 2) The filter is easily accessible without contortions or broken knuckles. 3) When it is time for filter changes . . . a prick punch in the top of the filter allows oil to drain back to the sump such that none is spilled during removal. No accessory case, lower cowl, or nose gear cleanup is required after filter removal. Kits Include: * Housing * Filter * O-Ring and Washer Exper. Oil Filter Housing Kit CH48109-1 filter...P/N 08-00977 ...$309.95 Exper Oil Filter Housing Kit CH48108-1 filter....P/N 08-00976 ...$309.95 Exper Adapter only ............................................P/N 08-00975 ...$289.00 STCd Oil Filter Housing Kit CH48109-1 filter ...P/N 08-01237 ...$329.95 STCd Oil Filter Housing Kit CH48108-1 filter ...P/N 08-01236 ...$333.95 STCd Adapter only ...........................................P/N 08-01094 ...$309.00
Changing hot engine oil has never been easier! With the SAF-AIR oil drain valve, no wrench is needed to remove the drain plug. A simple push and turn of the SAF-AIR valve locks it in the open position. The valve is made completely from anodized aluminum and stainless steel components. These materials are used throughout the aircraft industry due to their strength and durability. FAA & PMA APPROVED. Description S7516 P7500 P5000 M20150 Part No. 05-00984 05-00985 07-00879 05-00987 Price $84.50 $84.75 $85.75 $41.50 Description S6250 S5020J M12175 S1000 Part No. 06-00637 05-00986 07-00876 07-00880 Price $79.50 $38.75 $38.75 $85.75
334
OIL SYSTEMS
CHRISTEN 801 INVERTED OIL SYSTEM
Christen 806-4 Breather Tee. Christen 809 Breather Adapter Christen 803 Oil Separator Standard Lycoming Breather Port Plugged Overboard Breather Line Standard Lycoming Oil Pick-up Tube Sump screen removed. Christen 804-V Sump Fitting Christen 810-S Oil Strainer fitting
This accessory kit for Lycoming engines provides normal engine lubrication with minimal oil loss during aerobatic flight. It functions as a selfcontained extension of the normal engine oil and breather systems. Can be installed in a few hours without engine disassembly. Part No. 801-4 801-6 811-V 811-A Description
For four-cylinder engines. Includes 802 Oil Valve (with plug wrench and plugs for unused ports), 803 Oil Separator, 806-4 Breather Tee, and product manual which provides detailed instructions for application. Weight: 4.75 lb. installed. For six-cylinder engines. Same as 801-4 Kit, but is supplied with 806-6 Breather Tee. Weight: 4.75 lb. installed. For vertical-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 804-V Sump Fitting (vertical type) with crush gasket and MS20822-10D elbow. Weight: 0.50 lb. installed. For horizontal-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 805 Sump Plug with insertion tool, 804-A Sump Fitting (angular 360 swivel-type) with crush gasket and wrench for swivel clamping screw. Weight: 0.36 lb. installed. For horizontal-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 805 Sump Plug with insertion tool, 804-S Sump Fitting (straight-type) with crush gasket. Weight: 0.33 lb. installed. For engines with forward breather ports such as the O-235 and O-290 models. Includes 809 Breather Adapter with gasket. AN84212D hose elbow, and MS20913-6D plug for forward breather port. Weight: 0.53 lb. installed. For addition of oil ports to engine sumps. Includes two 812 Weld Bosses and quantity of 5% silicon-aluminum welding rod (type 4043) Weight: 0.12 lb. installed. Same as 812-2 Kit, except with only one 812 Weld Boss for addition of single sump port. Weight: 0.06 lb. installed. Stainless steel spring wire. Installed inside breather hose to permit relatively sharp bends without collapsing or kinking. 10 x 47/64. Weight: 0.12 lb. installed. Stainless steel spring wire. Installed inside breather hose to permit relatively sharp bends without collapsing or kinking. 10 x 63/64. Weight: 0.12 lb. installed. All hoses and fittings required for deluxe show-plane quality installation on four-cylinder engines. Includes Aeroquip braided stainless steel hose for oil lines, MIL-H-6000 rubber-fabric hose for breather lines, thin abrasive cut-off wheel for professional-quality hose cuts, AN and MS fittings (blue anodized), Aeroquip hose end fittings (blue and red anodized), and miniature stainless steel hose clamps. All materials are factory new; no surplus. Weight Excluding Hose: 1.53 lb. installed.
A high-quality welded and powder-coated aluminum assembly designed to save oil vs. direct overboard crankcase breathers in normal flight operations. Features an extrahigh-volume design offering enhanced inverted flight performance in entry-level aerobatic aircraft, allowing oil to be retained and returned to the engine during shortduration inverted and limited negative G maneuvers. The angled design makes it a perfect fit for Sonex Aircraft angled firewalls, while retaining compatibility with traditional vertical firewall installations in other aircraft. Comes with comprehensive installation instructions suitable for a wide-range of engine installations. P/N 08-07107 ................. $106.95
CM WP ME HA AP LG EP CS IN EL AV TO PS
These kits for sump mods come with fittings and welding rod. Aluminum Sumps (most 4 cyl) One boss... P/N 08-00789.... $35.00 Two boss... P/N 08-00790.... $65.00 Magnesium Sumps (most 6 cyl.) One boss... P/N 08-00791.... $60.00 Two boss... P/N 08-00792.... $95.00
811-S
$446.95
Raven systems consist of the valve with three pipe plugs, tank, mount, and clamps. The tank is constructed from aluminum and is tig welded using stainless steel internal parts prevent corrosion. Valve is machined from solid aluminum, and all parts are power coated black or white. Valve is 5-1/2h x 1-1/2 x 1-1/2 & weighs 1.85 lbs, 5 tank is for 4 or 6 cylinder applications, & 4 tank is for 4 cyl. applications only. tank-black ...........P/N 08-00796 ......... $724.00 tank-white ...........P/N 08-00800 ......... $735.00 tank-black ...........P/N 08-00797 ......... $784.00 tank-white ...........P/N 08-00801 ......... $724.00
807-4
$1,433.00
807-4 Economy Hose & Fitting Kit 807-6 Economy Hose & Fitting Kit
$607.00
These kits include same items as Aviat Factory Kits but are packaged by Aircraft Spruce.
$627.00
10-page detailed manual - describes system operation & procedure for selecting proper components for each engine model. P/N 05-20600 ............. $17.50 ea.
These sump fitting kits come with specialized fittings, washers , O rings needed to install the kit. Sump kit for Horizontal screen 4 or 6 cyl. Lyc. P/N 08-00787 .... $427.00 Sump kit for Vertical screen 4 or 6 cyl. Lyc. P/N 08-00788 .... $279.00
Multiple port gravity operated ball valve. It is cast aluminum with textured white epoxy enamel finish and all internal steel parts are cadmium plated. Normally installed on firewall or on engine mount. Designed for fittings to be installed either at side or front or both. Requires 3 AN816-10D nipples for hose connection. Wt. 1.75 lbs. installed. P/N 08-06745 ........ $349.00 Features welded aluminum construction with a textured white epoxy enamel finish. All internal parts are cadmium plated, and unit includes stainless steel positioning clamps. Normally installed on fire wall or on engine mount. Requires 2 AN84212D or -16D hose elbows and one AN823-10D hose fitting. Wt. 2.8 lbs. installed. Applicable to all Lycoming engine applications. Used to replace a worn out or broken oil separator on Christen 801-4 systems only. P/N 08-06740 ................. $446.00
For engines that have horizontal oil filters, this system will eliminate the problem of oil dripping down into the engine and on the firewall while the filter is being removed. A tray is supplied that catches the oil coming from the engine flange and filter while it is being unscrewed. The oil in the tray pours down a hose connected to the bottom of the tray. The filter can now be removed and thrown away. Includes the welded aluminum tray, oil filter wrench and hose. Full set of instructions included. ...................................P/N 08-00974 .......... $59.75
SLIME FIGHTER
BV
335
The filter element is made from medical grade, type 304 stainless steel micronic filter cloth providing unmatched protection against oil contamination and resultant engine damage. A rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The unique twist lock design allows for easy disassembly, inspection and cleaning. The quad-ring gasket doubles the seal between the filter and the engine . The filter housing is carved out of a solid piece of 6061 T6 billet aluminum with cooling fins, which not only looks good but aids in dissipating heat. Features: Cleanable and Reusable High Flow Rate Unique Twist Lock Design Exteriors Fins Unaffected by Water, Heat, or Pressure Safety Wire Attachments 360 degrees Environmentally Friendly.
Challenger CP-48103C 13/1616 Thread w/o relief valve CP-48104C 13/1616 Thread w/o relief valve CP-48108C 3/4-16 Thread w/o relief valve Replaces Our P/N Engine Model Price
$498.95
LYCOMING $295.00 CH48103-1 08-06017 O-320, IO320, O360,IO-360, LO-360, TO-360, HIO-360, LTOCH48104-1 08-06018 $295.00 360, LHI0-360 SERIES $295.00
$474.00
Reduce oil consumption and remove harmful water vapor with Airwolfs Walker Air/Oil Separator. The AirSep distills and recirculates crankcase oil vapor generated by normal operation, extending engine life. The Airwolf Walker AirSeps uses a tiny amount of vacuum pump discharge air, to help condense the oil inside the AirSep, and to overcome crankcase pressure to return collected oil to the engine while the engine is running. The competitive systems are only gravity flow so no oil returns into the engine until the engine is completely shut off. Thus, one system is large enough to clean both the engine breather oil and wet vacuum pumps discharge. It comes with a lifetime warranty on workmanship and material of all new AirSeps produced. STCd MiniSep, 3/4 Inlet ......................................... P/N 08-05887 ......$395.00 MiniSep, 1 Inlet ............................................ P/N 08-07188 ......$395.00 MiniSep, 5/8 Inlet ......................................... P/N 08-07189 ......$395.00 Wet Vacuum Pump MiniSep, 5/8 Inlet ......... P/N 08-07190 ......$395.00 These air oil separators are proven and tested to help keep your kit plane or experimental A/C free & clean from oil splatter. Totally serviceable and easy to maintain by removing the lid , rinse inspect and reinstall. The design allows for easy installation in the breather line by the use of hose clamps. Oil from the separator is returned thru tubing to a port in your engine's Small Med./Lg. housing or by returning at the base of the engine crank case. Made from durable 6061T6 Aluminum, tig welded and anodized in a flat gold an for high quality finish & corrosion protection. Suitable for most engines such as Lycoming, Continental,Jabiru, MP radials & most engines & Radials up to 1200HP for the (SP0900). Small.............................................. P/N 08-07286 .......................$295.00 Medium .......................................... P/N 08-07287 .......................$335.00 Large ............................................. P/N 08-07288 .......................$365.00 Easy Clamp Bracket Mount ........... P/N 08-07289 .......................$170.00
CONTINENTAL CH48108-1 08-06019 6-285, IO-346, IO-360, TSIO-360, O-470, IO-470, LIO-470, TSIO-470, IO-520, CP-48109C 3/4-16 Thread w/ relief CH48109-1 08-06020 TSIO-520, GTSIO-520, LTSIO-520, IO-550 valve SERIES LYCOMING CP-48110C O-235, IO-320 3/4-16 Thread w/ CP48110-1 08-06021 SERIES LIO-320, Nipple w/o relief AIO-3230, AEIO-320, valve O360,IO360, AIO-360, HIO-360,LIO-360, TIO-360, LHIO-360, CP-48111C 3/4-16 AEIO-360, O-540, IOThread w/nipple CH48111-1 08-06022 540, HIO-540, TIO-540, w/o relief valve AEIO-540, LTIO-540, TIO-541, IO-580, IO720 SERIES Bombardier-Rotax 912 F2, 912 F3, 912 F4, CP-9124C 8245-706 08-07174 912 S2, 912 S3, 912 w/ relief valve S4, 914 F2, 914 F3, 914 F4
$295.00
$295.00
$295.00
$195.50
CHALLENGER ACCESSORIES
Bonanza Gasket Gasket C140 150 152 Gasket C170 172 Gasket c180 182 185 Gasket PA28-151, 161 Gasket Mooney 20E, F Gasket Mooney M20J Gasket Oval Gasket Piper Round Gasket C177 Cardnal 08-01041 08-01043 08-01044 08-01045 08-01046 08-01047 08-01048 08-01049 08-01050 08-01264 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95 $9.95
The filter element is made from medical grade, type 304 stainless steel micronic filter cloth providing unmatched protection against oil contamination and resultant engine damage. A rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The unique twist lock design allows for easy disassembly, inspection and cleaning. The quad-ring gasket doubles the seal between the filter and the engine . The filter housing is carved out of a solid piece of 6061 T6 billet aluminum with cooling fins, which not only looks good but aids in dissipating heat. Features: Cleanable and Reusable High Flow Rate Unique Twist Lock Design Exteriors Fins Unaffected by Water, Heat, or Pressure Safety Wire Attachments 360 degrees Environmentally Friendly. P/N 08-07174 ..........$195.50
CHALLENGER STAINLESS STEEL MICRONIC OIL FILTER FOR ROTAX 912/914 ENGINES
336
These 4 inch diameter reservoirs have beaded outlets for 5/8 I.D. hoses and a mounting flange for easy firewall attachment. These units are of a new, improved design and the reservoir body is now a spun aluminum bowl for optimum performance. The oil separators minimize oil loss and allow free breathing of the engine. They are recommended for experimental aircraft use only and are not STCd for any certificated aircraft. Size: 4dia.x 3-3/8h. P/N 10570................................. $49.50 Designed to remove oil from the engine crankcase breather line providing the builder with a cleaner plane, less oil consumption, and prolonged engine life from maximum cooking, cleaning, & lubrication. Fashioned after Tony Bingeliss proven design, these separators incorporate several enhancements, including O-ring seals for the lid. Fabricated from aircraft quality materials, TIG welded, and alodyned for corrosion control. They can be firewall or cooling baffle mounted with the cushion clamp provided. The design allows for easy installation in the breather line by the use of hose clamps. Oil from the separator is returned thru tubing to a port in your engines housing. Should your engine not have an available oil return port, RMJ-Aero can provide a Self Sealing Clamp-On Adapter utilizing your engines oil filler neck. Installation of this adapter is easy for both flying and aircraft under construction. When clamped in place around the filler neck, the adapter provides a return port for separated oil and an integral seal, which prevents leakage. Installation & maintenance guidelines are included. Description Oil Separator for Lycoming (3/4 inlet/outlet) Oil Separator for Cont. (5/8 inlet/outlet) Adapter for Lycomings Adapter for Continentals Part No. 08-00571 08-00572 08-00577 08-00578 Price $249.00 $254.95 $31.25 $28.50
The M-20 Air/Oil Separators for crankcase breathers have set the performance standards for aviation. A simple performance test for any separator is to fill the engine Model oil to the full mark and take a 2 hour flight. 400 Only with the M-20 will the oil still read full Model with none blown out on the belly. This dif300 ference makes them preferred over all others. Only the M-20 Separators carry FAA approval for all 1600 makes and modelos of certified piston aircraft from 45 hp to 950 hp. They are also applicable to all homebuilts and foreign made aircraft with similar power. No vacuum pump connection is used, since the addition of as little as 1/16 PSI will make a new engine perform like it is run-out. M-20s vent the crankcase pressure and use only gravity for returning the oil. The -A and -B suffix varies only in the direction of the oil return tube. On the -A models the direction is away from the inlet, on the -B towards the inlet. The -As generally favor Lycoming, Franklin and radials, the -Bs favor Continentals. Either may be mounted in-line; the -B may also be firewall mounted since it has a blank side. Typical Airplane Models Part No. Price Model 300-A, 45 to 315 hp 08-00182 $396.00 Model 300-B, 45 to 315 hp 08-00409 $396.00 High Horsepower Airplane Models Part No. Price Model 400XL-A, 315 to 950 hp 08-00413 $462.00 Model 400XL-B, 315 to 950 hp 08-00861 $462.00 Helicopter Models Part No. Price Model 300H-A, 45 to 315 hp 08-00411 $436.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This is a 3-1/4 dia. can reservoir with a 3/4 or 5/8 od hose barb outlet, 1/8npt curtis drain valve on bottom of can, and a fire wall mounting bracket. Item also available with a 5/8 od hose barb outlet, please call or email for price & availability. It keeps oil in can and off belly of airplane then can be drained later with petcock. Helps to keep crank case condensation to a minimum. Recommended for experimental aircraft use only not STCd for certified aircraft. 3/4 od hose barb outlet .............................P/N 08-00765 ...........$98.75 5/8 od hose barb outlet ..............................P/N 08-07219 ...........$98.75 AeroMag is a powerful high-tech magnet assembly that fits around your oil filter to trap and hold steel particles against the inner wall of the filter canister. These are the particles that are missed by the standard aircraft filter. This results in fewer damaging wear particles recirculating in your oil, and prolonged engine life. Install is simple, and there are no moving parts. AeroMag fits all Lycoming & Continental engine filters. For experimental aircraft only (FAA approval pending). P/N 08-01088........... $82.25 AeroMag for 3 Dia. Filters (Rotax) ........... P/N 08-01235........... $59.75
AEROMAG
337
OIL COOLERS
MEGGITT TROY OIL COOLERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MEGGITT TROY South Wind 8406R (formerly Harrison P/N 8526250). Applicable to all Lycoming installations from 4-cylinder 0-235 through 6-cylinder IO-540 engines. Inlet & outlet ports accept 3/8 pipe fittings. Fits Beech B-19 Sport (0-320-E2C), C-23 Sundowner (0-360-A4G), Muskateer (0-360-A2G), Cessna 172 Skyhawk (0-320-E2D), 177 Cardinal (I0-360-AF6D), 177 Cardinal (0-0-360-A1FG), 177 Cardinal RG (0-360-AFGD), Mooney Ranger (0-360-A2D). Size: 7.75l x 3.5d x 4.75h. Wt.: 4 lbs. Model 8406R .................. P/N 8406R .... $615.00
Model 8432R--Fits BeechA24R Sierra (IO-360-A2B), Mooney Chaparral
(IO-360-A1A), Mooney Mark 22 (TIO-541-A1A). Weight 4 lbs. size: 5-3/4Hx8Wx3-5/8L ............................... P/N 8432R .... $697.00 Model 10611R - Fits Piper Single Engines....... P/N 10611R .. $682.00 Model 10599R - Fits Cessna and Stoddard ..... P/N 10599R .. $645.00 Model 10578R - Fits Gulfstream AA-1 ............. P/N 10578R .. $820.00 Model 10610R - Fits Cessnas .......................... P/N 10610R .. $650.00 Model 10614R - Fits Piper, Cessna, Mooney .. P/N 10614R $1,182.00 Model 10568R - Fits Gulfstream AA5B, GA-7 .. P/N 10568R .. $623.00 Note: The oil coolers manufactured by MEGGITT TROY formerly Stewart Warner will fit the aircraft listed but in most cases are not furnished with the FAA/PMA certification for those aircraft. The exceptions are P/N 8406R and P/N 8432R are furnished with FAA/PMA approval for certain Mooney aircraft. For all other applications, Form 337 field approvals are required for installation on certificated aircraft. Call for further information.
Aero Classics now offers the General Aviation community the largest number of FAA-PMA (Federal Aviation Administration - Parts Manufacturing Authority) approved oil coolers in the world. Remote-mount oil coolers for piston and turbine engines, mount to the airframe 8000357 or engine baffle instead of directly to Bar & Plate the engine. Hoses are used to connect the oil cooler to the engine. This type of oil cooler is used with most non-Continental engines including all Lycoming engines. All FAA-PMA approved with supporting FAA 8130-3 documentation unless otherwise noted. All Aero-Classic coolers come with a full two year warranty. Features: Corrosion Protection per MIL-C-5541, Class 1A. Pressure tested to 400 psig. Optimized internal oil flow design. Light-weight. Low cost. Two year warranty Note: Models 8000081, 8000706 & 8000942 are for experimental aircraft only. Not FAA-PMA Approved. Model No. 8000075 8000074 8000081* 8000215 8000216 8000353 8000328 8000343 8000356 8000357 8000590 8000661 8000618 8000706 8000942 8000950 8000997 8001201 FAA/PMA Approved 7 Row Drawn Cup YES 9 Row Drawn Cup YES 10 Row Drawn Cup NO 13 Row Drawn Cup YES 17 Row Drawn Cup YES 18 Row Drawn Cup YES Bar & Plate YES 9 Row 2 Pass Drawn Cup YES Bar & Plate YES Bar & Plate YES Bar & Plate with Valve YES 13 Row Drawn Cup YES Bar & Plate with Valve YES Bar & Plate NO Bar & Plate NO Bar & Plate with Valve YES Bar & Plate with Valve YES 7 Row Bar & Plate YES Description Part No. 08-00640 08-00641 08-00642 08-00643 08-00644 08-00808 08-00809 08-00810 08-00811 08-00812 08-07408 08-07409 08-07410 08-07411 08-07412 08-07413 08-07414 08-07415 Price $246.00 $248.00 $244.95 $239.95 $338.95 $429.00 $478.95 $498.95 $689.00 $689.00 $1,949.00 $384.95 $1,730.00 $688.00 $989.00 $1,679.00 $1,989.00 $467.00
Lightweight, compact oil cooler improves cooling in closely cowled homebuilts. Mounts in any position. Furnished with 4 ft. of 5/16 I.D. hose and 4 clamps. Size 7-1/2H x 12-3/4L x 3/4D. P/N 403 ...................................$56.50
PosiTech factory new oil coolers are designed for use on experimental aircraft such as RV-4, 6, & 8, Glastar, Lancair, & Europa. Offered at exceptional savings compared to equivalent coolers. 2-yr/2000-hour warranty. Posi- No.of Tech Oil Part No. Tubes P10578C P10568C P20002C P20003C P20004C P20005C P20006C P20008C P10634C 4 5 6 7 8 10 11 14 12 Overall (WxHxD) 8x 3.68x 3.62 8x 4.17x 3.62 8x 4.66x 3.62 8x 5.15x 3.62 8x 5.64x 3.62 8x 6.62x 3.62 8x 7.11x 3.62 8x 8.63x 3.62 8x 7.60x 3.62 8x 5.64x 3.62 8x 6.13x 3.62 8x 7.11x 3.62 11.25 x 5.35 x 1.25 PC No. 4213MN 4212MN 4211MN 4220MN 4215MN 4216MN 4219MN 4221MN 4222MN 4214MN Applications Our P/N
Price
O-360 08-01286 $164.00 IO-360 IO-360 IO-540 4215 4216 4219 $188.85 $189.00 $189.00
Aeros new HE Series (High Efficiency) FAAPMA oil coolers are designed to be direct replacements for Stewart Warner (today known as Meggitt) oil coolers most of which do not have FAA-PMA. Aero-Classics new HE Series oil coolers are intended to be a competitively priced option for those whose aircraft came with a Stewart Warner oil cooler. The HE Series come with full FAA-PMA documentation, an industry leading 2YR/2,000HR warranty, and heat rejection capabilities that match or exceed the competition. Aeros new HE Series oil coolers are approved for use on many Beech, Cessna, Grumman, Mooney, Robinson Helicopter, and other popular aircraft makes. Listed below is the SW part number and the corresponding Aero-Classics HE Series replacement part number.
SW Part No. 10578R 10877A 10599R 8406R 10568R 10614R 10610R 10611R 10634R 8432R 8432S 10865B 10880A 10891A 10886A 8406R Aero Part Description No. 8001535 4 Row 6 Long Core 8001588 6 Row 7 Long Core 8001599 8 Row 8 Long Core 8001602 6 Row 6 Long Core 8001640 5 Row 6 Long Core 8001643 14 Row 6 Long Core 8001646 10 Row 6 Long Core 8001649 11 Row 6 Long Core 8001652 12 Row 6 Long Core 8001689 8 Row Dual Pass 6 Long Core 8001694 8 Dual Pass 6 Long Core 8001701 16 Row 7 Long Core 8001713 16 Row Dual Pass 7 Long Core 8001718 14 Row Dual Pass 6 Long Core 8001723 16 Row 7 Long Core 8001733 6 Row Bar & Plate 8 Long Core Part No. 08-07425 08-07426 08-07427 08-07428 08-07429 08-07430 08-07431 08-07432 08-07433 08-07434 08-07435 08-07436 08-07437 08-07438 08-07439 08-07440 Price $413.00 $509.00 $524.00 $484.00 $419.00 $676.00 $565.00 $594.00 $632.00 $597.00 $652.00 $872.00 $918.00 $699.00 $842.00 $484.00
IO-540, 08-01287 $249.50 Heli. IO-540 08-01288 $249.00 Variou 4214 $186.95
8 Two P20104C Pass 9 Two P10641C Pass 11Two P10631C Pass P010904 9
4217MN Various 08-01289 $250.00 4218MN Various 08-01290 $188.85 4228MN Rotax 08-01291 $168.95
338
OIL COOLERS
Aero-Classics engine mounted oil coolers for Continental powered aircraft offer high quality features such as a CNC machined base for reliable, leak-proof mounting. Aeros line of Continental 8000545 10 Non-Congealing front mounted oil coolers feature a hassle free design that accommodates Universal 7th Stud both 7th stud and non-7th stud engine cases - eliminating the chance of getting the wrong oil cooler. The oil coolers on Continental engines often mount directly to the engine and do not require hoses. All FAA-PMA approved with supporting FAA 8130-3 documentation, and full two year warranty.
Spruce Model TCM Description Part No. No. PN 8000545 639171 10 Non-congealing Universal 7th Stud Front Mount 08-04961 8000677 654595 10 Non-congealing 7th Stud Only Front Mount 08-04962 8000319 639151 11 Non-congealing Universal 7th Stud Front Mount 08-04963 8000307 654593 11 Non-congealing 7th Stud Only Front Mount 08-04964 8000531 639152 11.5 Non-congealing Universal 7th Stud Front Mount 08-04965 8000127 652759 11.5 Non-congealing 7th Stud Only Front Mount 08-04966 8000683 626189 12 Bolt Congealing Non 7th Stud Front Mount 08-04967 8000687 652671 12 Bolt Congealing 7th Stud Front Mount 08-04968 8000925 627392 8 Bolt Front Mount 08-07418 8000440 654580 Rear Mount 08-07419 8000464 646685 Rear Mount 08-07420 8000934 646880 8 Bolt Rear Mount 08-07421 8000953 654585 Rear Mount 08-07422 8000960 654572 Rear Mount 08-07423 8001213 655090 Rear Mount 08-07424 Price $680.00 $679.00 $628.95 $628.95 $685.00 $679.00 $657.00 $658.00 $589.00 $817.00 $814.00 $619.00 $1,258.00 $786.00 $1,244.00
The Tundra Cover is designed to fit your Rotax radiators either from the front or rear. It is in-flight adjustable so you have complete control of your engines temperature at all times. In-Flight adjustable to give you complete control of your engines temperature at all times. Control the Tundra Covers from the cockpit with precision and ease. Can adjust full open (giving approx. 80% airflow) to full closed or anywhere in between. Installs easily with all hardware supplied using only simple tools. PN 13-05601........................... $295.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A new ground adjustable Oil Cooler Cover is now available for your Rotax 912 or HKS engine. Comes complete and ready to install. Theres a better way to get your engines oil temps back in the green, so get rid of that Duct Tape and cardboard! PN 13-05602............................. $73.60 The new Airwolf Oil Chiller is 20 aircraft quality aluminum fins that are precisely bent to mold around the outside of any standard oil filter. These fins total a whopping 600 sq/in of cooling area to suck the heat from your oil filter, thereby cooling your engine oil. The fins are gold anodized and quickly secured to the oil filter with two hose clamps. Easy on..easy off. Everything you need is in the kit. Lower your oil temperatures today with our Poor Mans oil cooler. P/N 08-07394 .......................$149.95 Designed to regulate the oil temperature on engines like the Rotax and Jabiru. If you are flying time and time again and the engine temperature is only getting to say 85C the water will remain in your oil as a contaminant and can go on to destroy your engine with corrosion problems. Additionally, warmup is achieved very quickly on even the coldest of days because the thermostat diverts the oil flow from the oil cooler. Made in the USA these special oil thermostat units are designed to quickly allow your engine to reach and maintain its optimum operating temperature even on the coldest of days. CNC machined from 6061-T6 the unit is anodised with the type 2 surface finish to protect the thermostat long-term against corrosion. All of the hardware is aircraft grade and the oil thermostat unit is finished to the highest possible standards and is supplied with hose nipples to fit the most common oil tubing diameter used by Rotax and Jabiru. There are a number of benefits in using an oil thermostat in your aircraft which include fuel savings resulting from quick warmup times and engine operation at optimum oil temperature which also increases engine life because the engine is being operated at the correct oil temperature. P/N 08-07212 .......................$146.95
NDM is one of the worlds largest volume manufacturers of FAA approved oil coolers. An approved supplier to both Lycoming and Continental, as well as many airframe manufacturers, NDM holds FAA/PMAs for most of these oil coolers. NDM oil coolers are manufactured utilizing the vacuum oven brazing process rather than the less costly Controlled Atmosphere Brazing (CAB) method used by others to save costs. Utilizing the vacuum oven process guarantees a high quality product and lower warranty returns. If you are not sure which NDM oil cooler is FAA Approved for your aircraft, please provide the aircraft model & serial number and we will determine the correct oil cooler for your application. Part No. 08-00739 08-00740 08-00741 08-00742 08-00743 08-00744 08-00745 08-00746 NDM P/N 20001A 20002A 20003A 20004A 20005A 20006A 20007A 20008A Stew.t Warner P/N N/A 8406R N/A 10599R N/A 10611R N/A 10614R Price $321.95 $326.95 $356.95 $393.95 $425.95 $476.95 $428.95 $509.00
The first new aircraft oil cooler design in 50 years. Computer modeling and flight testing have been used to develop coolers that deliver significantly lower oil temps with no increase in oil cooler size or oil pressure drop. Designed as a direct replacement for popular oil coolers used in experimental aircraft, the X- SERIES oil coolers are built to Airflow Systems specifications and certified aircraft oil cooler standards.Flight testing on the popular RV series of aircraft has shown oil temperature drops of 10 -15 degrees F for coolers of the same size in the same location. Not FAA approved. Model 2002X 2006X 2008X Horsepower Up to 150 hp 160 hp to 280 hp 280 hp to 390 hp PN 08-06153 08-06154 08-06155 Price $324.95 $438.95 $548.00
912 Oil Cooler Hose 13mm high heat hose for 912-914 oil coolers. Sold by the yard. P/N 15-06907 ...........................$7.50 These side louvers let hot air out of your engine compartment - or, if they are installed with the louvered openings facing forward, to bring cool air into the engine compartment, enhancing performance and service life of the engine and under-hood components. Helicopter owners often mount these over their oil cooler to let cool air in and help reduce operating temperatures. Complete with do-it-yourself instructions and hardware. Rest a set on your plane, hood or fender- see just how good they look! P/N 05-04969 .........................$99.00
OIL DIPSTICKS
This economical duct system provides the aircraft builder with a simple way to route cooling air to Stewart Warner style oil coolers. Manufactured from .040 aluminum, this kit was designed for use on RV series aircraft but is ideal for virtually any homebuilt using a firewall mounted oil cooler. Kit includes baffle duct, oil cooler duct, hardware, & installation instructions. P/N 08-05000 ........... $42.85 ea
New manufacture oil tank dipsticks stamped with proper calibration markings.
Dipstick Long Neck 13-3/4 ......................P/N 08-00037 ..............$42.50 Dipstick Short Neck 9-1/2 .......................P/N 08-04612 ..............$33.75 Dipstick 6 Qt. Short Neck 11-3/4 for O-200, C-90 P/N 08-04613 ..............$46.00 Dipstick 4 Qt. Ercoupe long Neck 18-3/4 P/N 08-04614 .............. $49.50
339
A cost-effective service to enhance your aviation maintenance practices. Aviation Oil Analysis by ALS Laboratory Groups Tribology Division (formerly Staveley Services Fluids Analysis) brings you a stateof-the-art oil analysis program designed specifically for aircraft owners. Oil analysis is an early warning system that reduces downtime, lowers maintenance costs, and helps you spot troubling issues before they become serious problems. Aviation Oil Analysis has updated their packaging to reduce transit times and keep you up to date with your results. A small vial, mailing bag, and information form are furnished with order. Upon receipt at the laboratory in Phoenix, AZ, the oil sample is analyzed and a full report is forwarded within 24 hours. Note: insufficient postage will cause a delay in receipt of your sample, please consult your local post office or contact the laboratory (1-800-445-7930) regarding current postage rates.
An approved Lycoming engine oil additive for prevention of oxidation of all metals. Designed for use in engine oil at 1:10 concentration, VpCI (Vapor Phase Corrosion Inhibitors) will protect your engine from corrosion (in solution and in all void spaces) for up to 3 years during storage. For hydraulic oil and gearbox assemblies. Performs effectively under the adverse conditions of 100% relative humidity, and in the presence of such corrosive species as chlorides, sulfur compounds or hydrogen sulfide. There are no hazardous chromates, nitrites or phosphate inhibitors, and it utilizes the finest paraffinic petroleum distillates as carriers. Possesses an exceedingly high flash point, enhancing in-plant safety when compared to common oil protectants. It comes in concentrate form, which is easily diluted with lubricating, hydraulic or preservative oils, saving shipping and inventory expense. Not only effective on ferrous metals, but also effective on zinc, aluminum, galvanized steel, copper, cadmium, silver, brass and many other alloys. Can be upgrade most lubricants in their anti-corrosion ability. Passes through 1 micron filter. Conforms to MIL-PRF-46002C. Conforms to MIL-I-85062 (Additives to oils). Conforms to MIL PRF-16173E. NATO 6850-66-132-6100. NSN 6850-01470-3358 P/N 09-02002 .............................$19.75 Designed to dramatically improve the performance of all mineral based , semi-synthetic and fully synthetic motor oils in the areas of corrosion protection, wear reduction, and seal protection. Designed to make regular engine oil what it needs to protect and lubricate any engine. A synergistic blend of advanced oil additives from all over the world, designed to reduce wear, curb deposit formation and more importantly protect engines against rust and corrosion. It contains multiple corrosion inhibitors for both ferrous and non-ferrous metals. A combination of ashless anti-wear compounds, anti-oxidants designed to reduce carbon deposits and special seal conditioners to prevent oil weeping. Camguard is FAA accepted and approved for use in piston engine aircraft oils meeting SAE-1899 standards. Compatible with piston aircraft oils, passenger car motor oils, most marine oils, and heavy-duty diesel oils. Camguard aircraft oil additive 1 pint .................. P/N 08-07096.....$24.95 Camguard aircraft oil additive Case of 4 pints ... P/N 08-07097.....$92.50 Camguard auto oil additive 1 pint ...................... P/N 08-07227.....$23.75 Camguard auto oil additive Case of 4 ............... P/N 08-07228.....$92.50 Camguard marine oil additive 1 pint .................. P/N 08-07229.....$23.75 Camguard marine oil additive Case of 4 ........... P/N 08-07230.....$92.50 Camguard Small Engine Supplement(pint) ....... P/N 08-07402.....$12.50 A modern synthetic blend that surpasses the lubrication and protection ability of petroleum oils. Formulated with clean-burning synthetics, it will not foul spark plugs. High film strength components ensure complete protection against piston seizure and scuffing due to inadequate lubrication.Special additives protect against rust and corrosion. Leaves your engine free of harmful deposits and offers essentially smoke-free operation when used at the recommended ratios. P/N GS001 .......................................$8.75
This kit includes a sample bottle, shipping container and the paperwork. Upon receipt, your sample will be processed within 24 hours with the results emailed or mailed from Lab One in Phoenix, AZ. Can be used on any reciprocating or turbine engine and helicopter transmissions and tail rotors. P/N 08-01222 .............. $12.95
Helps you detect abnormal engine wear and even predict impending engine trouble. It provides a comprehensive analysis of both the larger wear particles in the oil filter and the finer wear particles in the engines oil. You will get a detailed report on the filter element and the oil that is based on the state of the art analytical techniques and lab results interpretation. The report will be generated with in 24 hrs of the receipt of the sample. Each Kit Contains the following items: Customer Information Form (CIF) Plastic Oil Filter Bottle Oil Sample Bottle Oil Sample Hose User label for Oil Filter Bottle User label for Oil Sample Bottle Shipping label address to Aviation Laboratories *The laboratory analysis of the oil filter debris and oil sample included in the price of the kit (if sent with the oil filter). The filer can be returned; however, the cost of this is not included in the price. P/N 08-01051 ................. $112.95
A fine lubricating and preservative oil used to prevent corrosion in internal combustion engines during extended storage. MIL1-21260. Quart ........P/N 09-42450 .......... $24.00 Gallon ......P/N 09-42455 .......... $89.00
Mobil AGL Synthetic Aviaion Gear Lubricant offers measurably better wear protection for transmissions operating at high temperatures than Type I (MIL-L-7808) and Type II ( MIL-L-23699) turbine oils, as well as wear resistance that is especially beneficial to military and other helicopters operating under unusual stresses. Mobil AGL is formulated with synthesized hydrocarbon-based fluids. The combination of a naturally high viscosity index and a unique proprietary additive system help enable the gear lubricant to provide outstanding performance in extreme service applications at high temperatures, well beyond the capabilities of mineral oils. Note: ExxonMibil recommends Mobil AGL for use in helicopter transmissions only. Before using Mobil AGL, operators should confirm the OEMs approved transmission lubricants. Size: 5 Gallon. P/N 08-07406 ...............................$307.95 One-time metal treatment that virtually eliminates friction in all internal combustion engines which improves performance (horsepower), reduces wear, and extends engine life. Also decreases fuel consumption, reduces oil consumption, and lowers operating temperatures. Impregnates the engines bearing surfaces, forming a dry film lubricant that lasts no matter how many times the oil is changed. Continental A-65, C-85, and C-90 engines take the Half Kit. Most Lycoming and Continental engines used in light aircraft take the Single Kit. Turbocharged and Radial engines take from 2 to 6 Single Kits. Call for details if you have any questions on the quantity of Microlon needed for your application. Microlon CL-100 Aircraft Kit (Single) ...........P/N 09-35805 ........$119.95 Microlon CL-100 Aircraft Kit (Half) ..............P/N 09-35810 ..........$68.25
A modern synthetic blend that surpasses the lubrication and protection ability of petroleum oils. Formulated with clean-burning synthetics, it will not foul spark plugs. High film strength components ensure complete protection against piston seizure and scuffing due to inadequate lubrication.Special additives protect against rust and corrosion. Leaves your engine free of harmful deposits and offers essentially smoke-free operation when used at the recommended ratios. P/N GS001 .......................................$8.75
340
An ashless dispersant oil specifically developed for aviation piston engines. It combines non-metallic additives with selected high viscosity index base oils to give exceptional stability, dispersancy and anti-foaming performance. Based on the average ambient outside temperature at engine start-up the most common grades are SAE 40, SAE 50 and SAE 60, which equates to AeroShell Oil W80, W100 and W120 respectively. Traditionally, the choice is associated with climatic zones - AeroShell W80 for cold climate regions (-17 - 21C), AeroShell Oil W100 for temperate regions (15 - 30C) and AeroShell Oil W120 for warmer climates (above 26C). One Gallon ..................................... P/N 08-00344-1.....................$29.75 Case (4 Gallons)............................. P/N 08-00344 ........................$89.00 Avco Lycoming has approved oil additive LW-16702 that contains an anti-scuffing agent and can dramatically reduce engine wear. This additive is applicable to all Avco Lycoming piston aircraft engines, and factory recommends use at every oil change or every 50 hours, whichever occurs first. For 6-8 qt. sump, use one 6 oz. can, for 12-15 qt. sump, use (2) 6 oz. cans, for 17-19 qt. sump, use (3) 6 oz. cans, for 23 qt. sump, use (4) 6 oz. cans. P/N 08-05600 . $34.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PENNZOIL OIL
Two-cycle oil for air-cooled engines. Recommended by engine manufacturers for air- and water-cooled engines. 8oz. Single Bottle............................ P/N 08-06261 ..... $1.85 16 oz. Single Bottle ........................ P/N 08-01240 ..... $1.85 Case of 24 8oz. Bottles .................. P/N 08-06260 ... $42.00
AeroShell Oil Sport Plus 4 is ideal; as it is extremely resistant to the immense sheer forces that occur in areas of high-pressure contact such as high-speed gearboxes, valve trains, bearings, pistons and liners. This is where the blend of base oil and additives is most crucial. AeroShell Oil Sport Plus 4 is made up of a blend incorporating synthetic technology and high performance additives to provide long lasting protection. In addition, detergents in the oil keep important areas, such as the pistons and cylinders, clear of carbon based particles that tend to adhere to these surfaces. So when you change your oil to new AeroShell Oil Sport Plus 4, you are not only removing dirt from your engine, you are also replenishing the additives used to protect your engine during normal operation. DO NOT use AeroShell Oil Sport Plus 4 in
engines that are designed to use Ashless Dispersant aviation piston engine oils such as AeroShell W Oils. This includes air cooled Teledyne Continental Motors, Textron Lycoming and Jabiru engines.
Mineral Grease #5 (MIL-G-3545C) ....................... P/N General Purpose Grease #6 (MIL-PRF-24139A) .. P/N Synthetic Grease #7 (MIL-PRF-23827C) .............. P/N Mineral Grease/Helicopter #14 (MIL-G-25537C) .. P/N Synthetic Grease #22 (MIL-PRF-81322G) ............ P/N Synthetic Lithium Grease #33 (MIL-PRF-23827C) . P/N Syn. High Pressure Grease #33MS(MIL-G-21164D). P/N
AEROSHELL GREASES
4 Cycle Sport Plus 4 Oil (Liter) .......................P/N 08-07048 ........$13.95 4 Cycle Sport Plus 4 Oil (Case of 12) .............P/N 08-07047 ......$149.95 X/C oils provide easy starting and quick lubrication under low temperature conditions. Provides film strength and low wear under high temperature conditions. Provides excellent protection against engine deposits, ring groove carbon, piston lacquer, crankcase sludge and oil oxidation. Contains ashless dispersant which keeps engine clean. With more than 10 years of outstanding field performance, X/C oil meets Avco-Lycoming & Teledyne Continental engine specifications.
Description X/C 20W-50 Av. Oil 20W-50 Mineral oil Qt. P/N 08-05300 08-05310 Price/Qt. $5.50 $4.95 Case P/N 08-05301 08-07198 Price/Case $59.50 $59.00
This heavy duty multipurpose grease gun can be loaded with 14 ounce cartridges, bulk loaded, or loaded through a dispenser. Lever action design permits accurate control of grease flow Comes with 6" nozzle and P/N 08-07180 ....................$26.50
Mobilgrease 28 meets the quality level of U.S. Military Specification MIL-G-81322E, General-Purpose, Aircraft, and is approved against U.S. Military Specification DOD-G-24508A (Navy) for shipboard auxiliary machinery. It can be designated U.S. Military Symbol WTR and NATO Symbol G-395. Grease 28 ........................... P/N 08-06157........................... $9.75 Case.................................... P/N 08-07400....................... $409.95 Mobligrease33 is a true multipurpose aviation grease intended for use in highly loaded anti-friction bearings, gears, and actuators as well as instruments, high speed bearings (though not recommended for wheel bearings), and general airframe lubrication, over operating temperatures from 100 F to 250 F. Cartridge ...P/N 08-07407-1 ....$12.75 Case ....P/N 08-07407 ..$528.00 Mobil Jet Oil II helps keep oil systems clean. That can mean less maintenance more flying and greater revenue. Mobil Jet Oil II has a history of helping to keep aircraft where they belong - in the air generating revenue. Today, about 160 major airline use Mobil Jet Oil II in more than 11,000 gas turbine engines. QT. ............................. P/N 08-00763 ......$13.95 Mobil Jet II Case ........ P/N 08-00764 ....$316.00 Mobil Jet Oil 254 is a third-generation synthetic lubricant made from a specially prepared hindered-ester base stock fortified with a special chemical additive package. The result is a product having superior thermal and oxidation stability that resists deterioration and deposit formation, while maintaining the physical characteristics required by builder and military specifications. Because of this, the physical properties of Mobil Jet Oil 254 are similar to currently available, earlier-generation turbine lubricants. QT.......P/N 08-07374-1 .... $15.85 Case ....... P/N 08-07374 ....$373.95
MOBIL GREASE 28
X/C 25W-60 is the first and only multiviscosity aviation oil designed and approved for radial engines originally designed to run on 120 grade. Pilots and mechanics will notice immediate benefits with X/C 25W-60 over single grade oils. Benefits such as improved oil flow at startup, quicker warm-up time, cooler operating temperatures and a cleaner operating engine. X/C 25W-60 also has proven corrosion protection in extreme conditions. X/C 25W-60 can be used year-round, during break-in and on to TBO. P/N 08-00885 ...................... $23.75 Exxon Elite 20W-50 is a multigrade oil with the flexibility to lubricate effectively over a wider range of temperatures than monograde oils. Compared to a monograde oil, a multigrade oil provides better cold-start protection and a stronger lubricant film at typical operating temperatures. Other benefits include lower oil consumption and better fuel economy as a multigrade oil, Exxon Elite 20W-50 has all these intrinsic advantages. Meets SAE J1899 Meets MIL-L-22851D (obsolete) U.S. military approved Contains anti-wear/anti-scuffing additive required by some Lycoming engines FAA approved fluid for Alternative Method of compliance w/AD-80-04-03-R2, paragraph b.1 Quart....... P/N 08-00392 .....$8.65 Case...... P/N 08-00432 ..... $83.00
341
Clean Funnel is the funnel that keeps itself clean. Replacing the caps on each end after each use prevents left over fluid from dripping out, and keeps your work area or baggage compartment clean. No need to wipe your funnel out with a rag before reusing. Clean Funnel is ideal for use with fuel or oil as well as windshield washer fluid, detergents, antifreeze, hydraulic fluid, and more. Great for aircraft, automobiles, motorcylces, tractors, boats, ATVs snowmobiles, and more. Model 112 (turquoise) has a 1 pint fluid capacity and a 12 vinyl tube attached to its spout, making it very handy to reach into small or tight spaces. Model 415 (red) has a 1-1/2 quart capacity, 17 long with flexible spout, and spout I.D. is 9/16. Model 428 (black) has 1-1/2 quart & 13-1/4 long with a flexible spout and 1-1/8 O.D. spout.
CLEAN FUNNEL
Drip Trap is a mat made of corn stalks which captures oil, coolant, and other aviation fluids that can drip from the aircraft. Drip Trap measures 20 x 20 and can absorb up to 6 quarts of oil. It wont blow away, can be driven on, wont tip over like a drip pan, and can be walked on without tracking the fluids on the hangar floor. Excellent for use with aircraft, cars, SUVs, trucks, motorcycles and in shops. When Drip Trap is fully saturated just dispose of it and replace. Drip Trap is the environmentally friendly and economical way to capture and contain drips and spills. P/N 13-04950 .............. $22.95
HA AP
model 428
DRAIN MATE
LG EP CS IN EL AV TO PS BV
Price $6.75 $7.95 $7.95 The patented Drain Mate is a handy new pilot tool that works like a second pair of hands. Great for complete draining of motor oil bottles and other fluid containers, Drain Mate saves time, money, and frustration. Simple to use. The spring clamp attaches to the funnel, bucket or bowl. Bend or flex it to near vertical drain position, then insert bottle for final draining (after conventional bulk removal). Depress finger tabs to clamp/ unclamp bottle. The Drain Mate can also be used for other draining chores around the hangar, home, garage, marina, and shop. P/N 08-00570 ............ $9.95
These disposable funnels are very popular among aircraft owners and pilots for adding engine oil. They store flat, clean and dry in a recloseable bag, and eliminate the messy cleaning when using a regular funnel. Also ideal for brake fluid, resins, and paints. Furnished in pack of 10 funnels. Pack of 10.... P/N 08-00040 ........$3.10
The drip pan is 54-1/2 x 32-1/2 x 2 and is manufactured out of an extremely durable and chemical resistant plastic (high density polyethylene). White in color, our drip pan is neat and clean in appearance and allows for easy visual inspection and monitoring of any engine leaks. The size and design of the drip pan will collect virtually any leaking fluids and eliminate the need for five quart pails and other messy collection containers. It is also a convenient place to pour fuel samples. Specifically designed for general aviation. P/N 08-06700.........$148.50
The OIL-SAVER is simple in appearance, but a great deal of research has gone into its design. It consists of a basic rectangular funnel thats molded to hold six inverted oil bottles, the contents of which gradually drain out and into the depository of choice -- usually another oil bottle, leaving the plastic bottles clean enough for recycling. And with thousands of funnels already in use, they have proven to be versatile, practical tools that allow you to save money and recycle. Features: Innovative, Customer Friendly, Multi-purpose Containment Residual Liquid Reclamation, Pro-active, Money-making Design, Exceeds Recycling Standards, Convenient Storage, Global Application, No Assembly Required, Green / Enables Consumer to Take Pre-emptive Steps to Protect the Environment. P/N 08-07391 .................. $12.95
These newly developed oil Drip Pans are designed to protect floors from those irritating drips of oil, fuel and hydraulic fluid. They are overlapping to prevent drips from getting between the pans. Their interlocking feature allows various pan sizes to be joined, protecting floors from all shapes and sizes of aircraft. Their lightweight and durable plastic design makes for easy set-up and clean-up. The interlocking feature allows various pans to be joined, protecting floors from all shapes and sizes of aircraft, cars, buses, trucks and more! 24 X 30 ...............................P/N 08-07378 ................................. $29.95
DRIP PANS
STC SA4024NM Drain oil in wind or shop with little clean up. - Save money on clean up, solvent, labor and parts. - Oil
goes into bucket with out splashing or spilling. Approved for Cessna Aircraft Models: 210J through 210 R, T210J through T210R, P210H through P210R, 337 through 337H, T337B through T337H, and P337H 310 through 310R, T310P through T310R 320 through 320F, 340, and 340 A401 through 401B, 402 through 402C, 404, 411, 411A, 414, 414A, and 421 through 421C Description Single Engine Cessna Oil Quick Drain Kit Includes:, 1 STC Paper Work, 1 Probe, 1 Valve With o-ring, 1 AN900-10 Gasket Twin Engine Cessna Oil Quick Drain Kit Includes: 1 STC Paper Work, 1 Probe, 2 Valve With o-ring, 2 AN900-10 Gasket Nylon probe only Part No. Price
342
Oil Valve The Spill Stopper Takes the mess out of adding oil On/Off control No more spills Re-usable ......... P/N 13-02833 $1.95
ZX1 Supergrease is the only Lithium Complex based grease reinforced with ZX1 Micro-Oil! During operation, the nonparticulate ZX1 migrates from the grease to the components forming an extremely durable substrate film, which becomes the wearing surface. It is designed to work at extreme loads and temperatures when conventional lubricants have proved inadequate. For use in all environments, high speed, and high-pressure applications including oil fields, marine, industrial, agricultural, aeronautical, and automotive. For use on all bearings; slides and screws; swivel packings; rack and pinions; operating at extreme pressures and temperatures in hostile environments such as mud, water, steam, salt water, acids and alkalis. ZX1 Supergrease has a shear strength to cater peak loads well beyond the scope of other greases. ZX1 Supergrease is available in a 400 g cartridge and 500 g tub. Cartridge 400G ............................P/N 08-07273 ...........................$24.25 Tub 500G.....................................P/N 08-07274 ...........................$29.95
ZX1 SUPERGREASE
CM WP ME HA AP LG
Distinctive Features: Attractive, userfriendly design Wide-mouth drain pan / lid make oil changing easy and neat. Snug-fitting top prevents spillage. Large capacity. Holds oil and filters for at least two average oil and oil filter changes. Size: 4-1/2 gallons. Color: Yellow Unique filter tray. Filters drain on tray allowing for clean handling and removal. Environmentally friendly. Containers lid and tray are made of postconsumer recycled plastic. P/N 08-04975 .......................$13.85
ProLuber is a device that is added on to your oil system to give you prestart oil pressure. You just turn on the ProLuber for a couple of seconds, watch your oil pressure gauge rise, and then start the engine when the pressure reaches the desired level. It is able to generate 40-60 lbs. of oil pressure in your engine before you hit the ignition switch. Simple to install and requires no drilling through your oil pan or the block. Complete kit for installation. P/N 08-00197 .................. $465.00 Service reminder decal NEXT AIRCRAFT SERVICE DUE decal is black text on white semigloss background with FILL IN blanks. Removable decal is designed to adhere to any surface and not leave residue behind, perfect for aircraft rentals, owners, CFIs, trainers, service/repair stations, POH, log books, instrument panels, windows. Decal measures 3 x 3. Blank fields include: Tail Number Oil and Filter Change (Last and next hour and date) Annual Inspection Due Date (Month and Year) ELT Battery Due Date (Month and Year) Transponder Test / Inspection Due Date (Month and Year) Altimeter & Static System Test Due Date (Month and Year) 100 Hour Inspection (Last and Next) P/N 09-02137 .....................................$0.45
EP CS IN EL AV TO PS BV
NPG+ is new coolant providing dramatic improvements in heat transfer and viscosity that make the new fluid a pour-in, not requiring changes to cooling system components. NPG+ waterless coolant virtually eliminates boil over in gasoline or diesels - the waterless coolant allows engines to tolerate running hotter, without boiling over, and allows the cooling system to run at very low or no pressure. Because there is no water in the system engines operating with NPG+ will be free from corrosion and electrolysis, and the engines will run well no matter how hard they are driven or how hot or cold the environment is. Specified coolant for Rotax Aircraft Engines, Type 912 and 914 (series). P/N 08-04535 .............$38.50
AV-2 Aviation 2-Cycle Oil is a low-smoke formula specially formulated for Rotax Aircraft Engines. For over 12 years, AV-2 has proven its formula to be superior, not by exaggerated claims or hyped advertising, but by literally millions of trouble free flight hours. The custom blend of 50% high quality mineral base and 50% synthetic oils is designed to lubricate vital engine parts without leaving carbon deposits. AV-2 also protects your engine against rust & corrosion even during prolonged storage, a protection not found in straight synthetic oils. AV-2 is specially formulated for use in Dykes ring equipped Rotax Aircraft Engines. P/N 15-04992 ...................................$29.95
Rotax 4 stroke, 4 cylinder engines require special protection from high temperatures and gear wear. The semi-synthetic blend of our AV-9 is specially formulated to handle the unique operating conditions found in Rotax 4 cylinder engines with built-in gearboxes. Gearbox components are protected from premature failure with blended additives found in AV-9. The semisynthetic blend will also suspend lead from aviation fuels. Specially formulated and blended, AV-9 is the ideal choice for Rotax 4 cylinder 4 stroke engines. P/N 15-04994 .....................................$7.65
343
Clean up oil-based spills without wasting absorbency on water. Unlike rags or floor sweep, PIG WaterRepellent Oil-Absorbent Mat quickly soaks up gas and oil but repels water from rain, slush, washdowns, ponds and sumps and more! Safely absorbs and retains oils and oil-based liquidsincluding lubricants and fuelswhile actually repelling water. Eight layers of 100% polypropylene are thermally bonded to make PIG Mat the strongest mat on the market; wont rip, fray or fall apart, even when saturated Exclusive dimple pattern speeds wicking of liquid toward dry spots on pad, so messes disappear fast, cleanup is simple and you use each pad to full capacity. *3 each 15x20 Pads ..................... P/N 08-07354 ......................... $4.85 100 each 15x20 Pads .................. P/N 08-07318 ....................... $63.85 30x150 ft. Roll ............................... P/N 08-07321 ....................... $89.95
This handy tool guides oil around skid plates and cross members right into your oil drain for guaranteed no-mess oil changes! It quickly bends, molds and holds any shape, so you can customize the perfect channel to drain liquids without making a mess. Thick, pliable nitrile rubber coating is highly compatible with common automotive fluids and works in temperatures from -30F to 450F . Edges can be molded around filters or drains to create a leakproof seal; Tool stays in place for hands-free draining and channeling Cleans easily with cleaners and degreasers; stores flat or rolls up to take along in your tool box or glove compartment Great for draining oil and other fluids from any type of vehicle or equipment, including cars, trucks, motorcycles, aircraft, boats, forklifts, generators, snow blowers, mowers and more. *14.5x6.5 Funnel .......................... P/N 12-03147 ....................... $19.95 29x5 Funnel ................................. P/N 12-02599 ....................... $29.95
Eliminate messy drum storage areas without touching a mop or rag! Precut to fit on 55-gallon drums, PIG Drum-Top Pads quickly absorb drips or overfills to help keep your shop clean and safe, so you can focus on repairing vehicles. Precut with holes for 3/4 and 2 bungs to provide a perfect fit on steel 55-gallon drum tops Eight layers of 100% polypropylene are thermally bonded to make PIG Mat the strongest mat on the market; wont rip, fray or fall apart, even when saturated Highly absorbent material traps liquids, so it wont drip or leave behind fibers when you pick it up; spend less time collecting used absorbent between jobs. 5 Pads ............................................ P/N 08-07328 ....................... $11.50 20 Pads .......................................... P/N 08-07329 ....................... $37.50 Keep your PIG Mat within an arms reach for easy access and hassle-free dispensing. The PIG Magnetic Roll Holder attaches to any metal surface to keep Mat off the floor and close at hand. Holds one 15W x 50L PIG Mat Roll (P/N 08-07320 or P/N 08-07315) for easy one-hand dispensing Durable, powder-coated steel resists chips, rust and corrosion Powerful magnets keep Roll Holder firmly in place during dispensing; can be removed and relocated in seconds.14.5 Magnetic Roll Holder .....P/N 08-07331 ............. $28.00 Dispense PIG Mat the convenient way with this handy roll holder! Its free-standing, locking metal frame adjusts to accept a wide variety of rolls and is collapsible for compact storage. Adjust center bar to change width; choose 16 to save space and keep small rolls from sliding or 33 to maximize PIG Mat supply Folds for storage in tight spaces; locks open for hassle-free moving Tilted design positions Mat roll above rear support for enhanced stability when dispensing Durable painted steel resists rust and corrosion for long life. Mat Roll Dispenser ......................... P/N 08-07332 ....................... $69.85 Respond to spills fast so you can get back to work. Our hi-viz Kit has the supplies you need for quick cleanups, and its so affordable you can stock every spill-prone spot in your shop or stash one in each fleet vehicle for better liability protection! Moldable Socks surround equipment, drums or tanks and contain spills to keep them from spreading into walkways; also great for catching liquid that seeps under overhead doors Mat Pads and Socks safely soak up and retain oil, coolants, water, grease, gasoline, solvents, auto fluids, paint overspray, battery acid and most other liquids Bright nylon Bag stands out, so you can find it when you need it; makes a great insurance policy and simplifies reg compliance. Universal Spill Kit............................ P/N 08-07326 ....................... $43.75 Help keep extreme-traffic walkways dry and safe with this highly durable, absorbent Rug. Heat-fused TRAFFIC MAT Rug wont rip or fray, even under wheeled traffic, so its perfect for ensuring heavy-use, splash-prone areas stay clean and injury free. 100% polypropylene material is heat fused and needle punched for incredible durability; wont ball or fray, even under wheeled traffic Roll out to add traction and absorbency near parts washers, paint areas, work benches, doorways, service bays and other high-wear areas Safely absorbs and retains oil, coolants, water, grease, gasoline, solvents, auto fluids, paint overspray, battery acid and most other liquids Self-extinguishing material helps eliminate fire hazards; melts instead of burning if contacted by direct flame. *36x150 Ft. Standard Mat ............. P/N 08-07322 ..................... $132.95 36x100 Ft. Polybacked Mat ........... P/N 08-07323 ..................... $179.50
This Tablet goes anywhere to clean up drips, spills or splatters throughout the shop. Easier to use than floor sweep, so it reduces cleanup time. And with no damaging dust and grit to track around, the shop stays cleaner! Eight layers of 100% polypropylene are thermally bonded to make PIG Mat the strongest mat on the market; wont rip, fray or fall apart, even when saturated Exclusive dimple pattern speeds wicking of liquid toward dry spots on Pad, so messes disappear fast, cleanup is simple and you use each Pad to full capacity Convenient pop-up tabs let you hang the Tablet anywhere you need it *15 each 14x14.25 Pads .............. P/N 08-07314 ....................... $11.95 100 each 15x20 Pads .................. P/N 08-07312 ....................... $62.75 15x50 ft. Roll ................................. P/N 08-07315 ....................... $19.99
Genuine PIG Mat is the better way to soak up drips, spills and splatters, and spend more time repairing vehicles. Easier to use than floor sweep so it reduces cleanup time. And with no damaging dust and grit to track around, the shop stays cleaner! Safely absorbs and retains oil, coolants, water, grease, gasoline, solvents, auto fluids, paint overspray, battery acid and most other liquids Eight layers of 100% polypropylene are thermally bonded to make PIG Mat the strongest mat on the market; wont rip, fray or fall apart, even when saturated Use Mediumweight Pads for persistent leaks and mid-sized spills; strong enough to last all day at workstations, in service bays or under equipment. *3 each 15x20Pads ...................... P/N 08-07353 ......................... $4.50 100 each 15x20 Pads .................. P/N 08-07313 ....................... $74.75 30x150 ft. Roll ............................... P/N 08-07316 ..................... $118.95 Wrap flexible, self-contained PIG Socks around tanks, drum areas and puddles to halt the spread of liquid while the Socks thirsty absorbent filler absorbs it. Easier to use and clean up than messy floor sweep! Moldable Socks surround equipment, drums or tanks and contain spills to keep them from spreading into walkways; also great for catching liquid that seeps under overhead doors Contained absorbent makes cleanup quick and easy Thirsty 100% PIG Mat filler; polypropylene is highly absorbent and chemical resistant Polypropylene skin is chemical and tear resistant; reduces dust and holds in liquid, even when fully saturated Safely absorbs and retains oil, coolants, water, grease, gasoline, solvents, auto fluids, paint overspray, battery acid and most other liquids. *2 Universal Socks ......................... P/N 08-07324 ......................... $8.75 12 Universal Socks ......................... P/N 08-07327 ....................... $39.85 12 Water Eepelling Socks (oil only) P/N 08-07325 ....................... $59.50 * Designates item pictured.
344
Loosen or tighten your spark plugs with this handy tool. P/N 13-03921 ...................... $3.35
Black flexible plastic heavy duty handle.Tested to 40F P/N 13-03865 ...................... $4.95
Rivets or screws to any flat surface and holds two spare 14mm plugs. Tough polycarbonate plastic with spring-loaded plug anchors keeps plugs dry and protects gaps. P/N 13-03870 ...................... $3.95
Two piece shields for use over cables or wires with large end-fittings or existing installations. Single piece for use where the cable or wire may pass through the hole. Flat shields designed for use on wooden or composite firewalls using a fire resistant sealant to prevent leaks. Both types of shield available in flat or with dimple to accommodate rubber grommets up to outside diameter. Actual hole size in 2 piece shields is slightly larger than indicated to prevent chafing cable. Ream pilot hole in single piece shields oversize for the size grommet used. Use grommets that fit tightly around the cable or wire to insure a good seal. Shields may be installed with screws, bolts and plate nuts or rivnuts. Install cable and grommet in firewall. Locate the shield to insure that it is centered on the cable - then drill attach holes in firewall. Shields predrilled with 5/32 mounting holes. If more than one cable passes through grommet fire resistant sealant must be applied to grommet. Caution: Any holes drilled in the firewall are potential source of carbon monoxide in the cockpit. Extreme caution must be exercised when installing firewall shields in your aircraft. They do not provide the necessary seal around cables or wires to prevent carbon monoxide, smoke or fire from entering the cockpit. The shields are designed only to protect the sealing material (grommets/gaskets) from excessive heat.
CM WP ME HA AP LG
Single Piece 3/16 Hole with Rubber Backing P/N 61-175 ..............$9.50
The perfect replacement rope for worn-out manual starters. P/N 13-03922 ........... $0.45 per ft.
Original NGK. Black. 5000 ohm resistance. P/N 08-00737 is used on threaded type plugs. P/N 08-04960 is used on solid top plugs. P/N 08-00737 .............. $2.60 P/N 08-04960 .............. $2.60
Single Piece 5/16 Hole 3/4 Dimple For Grommet P/N 61-225 ..............$9.50
EP CS IN
High-quality multi-strand copper core unshielded wire. 7mm diameter. For all Rotax and most other engines. Replaces Rotax Part No. 965-158. P/N 11-04105 ........ $1.11 per ft.
Two Piece 3/8 Hole 1 Dimple For Grommet P/N 61-375 ............$11.50
PosiFlex coupler for Quicksilver For 377/477 w/o high-thrust mod ............... P/N 05-01985 ..........$249.95 For all high-thrust mods ............................. P/N 05-01986 ..........$239.95
FLEXDRIVE
Two Piece 3/8 Hole 1-1/4 Dimple For Grommet P/N 61-475 ............$11.50
EL AV TO
Getting the right oil-to-gas ratio is no problem with this tough polypropylene cup. Just fill the cup with oil to the ratio level desired, and mix with gasoline. Ratios from 16:1 to 50:1. Graduated in ounces and CCs for filling chain cases, etc. 18 oz. capacity. Cup ............ P/N 08-01091 ...................$3.95 Lid.............. P/N 08-03677 ...................$1.70
RATIO-RITE CUP
Two Piece 1/2 Hole 3/4 Dimple For Grommet P/N 61-300 ............$11.50
Heres a safe and easy method of fuel transfer. A simple jiggle of the Syphon Mate establishes the flow, and then air pressure maintains it. Never wears out, and its guaranteed for three years. The outlet end is 1/2 standard pipe thread for easy attachment to a garden hose, if needed. P/N 05-01018 ............ $7.95
SYPHON MATE
Two Piece 1/4 Hole 3/4 Dimple For Grommet P/N 61-250 ............$11.50
PS BV
The primary purpose of the clutch is to disengage the prop from the engine allowing it to start and operate at idle without vibration. When the engine is idling (below 2350 RPM) the prop is not turning. Installation of the clutch replaces the gear box flywheel and the hardy disk. Added weight is approx. 3 Lbs. P/N 10-04811 ........ $519.00
Two Piece 3/8 Hole 3/4 Dimple For Grommet P/N 61-275 ............$11.50
345
CESSNA
Aircraft Common Name 152, 152A Skyhawk 172I, J, K, L, M, N, P P172D R172E Skylark Cardinal Skylane Skywagon 175, A, B, C 177, A, B 180, A thru H 182, A thru R R182, TR182, T182 185, A thru F, A185F 188 Stationair 206, U206, A thru G, P206,A thru E TP206, A thru E, TU206, A thru G 207, A, T207, T207A Yates Aircraft A188B Conversion Centurion 210, A thru C 210, D thru H, J Model P/N 94150-40 94011-20 94110-40 94017-01 94110-40 94011-20 94110-40 94110-40 94011-02 94110-40 94110-40 94030-01 94031-01 94030-01 94031-01 94030-01 94031-01 94007-01 94110-40 94030-01 (2) 94031-01 (2) 94030-01 (2) Centurion 210K thru N 94031-01 (1) 94031-02 (1) 94030-01 (2) Turbo Centurion T210F thru H 94031-01 (1) 94031-02 (1) 94030-01 (2) Engine Price All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All $72.65 $103.95 $74.65 $177.95 $74.65 $103.95 $74.65 $74.65 $109.95 $74.65 $74.65 $118.95 $127.95 $118.95 $127.95 $118.95 $127.95 $296.95 $74.65 $118.95 $127.95 $118.95 $127.95 $218.00 $118.95 $127.95 $218.00 $118.95 $127.95 $218.00 $118.95 $194.95 $298.50
BEECHCRAFT
P/N 94150-40 94150-01 94150-01 94150-01 7351231-3 7351231-3 94150-01 94110-40 94011-04 94031-03 94031-03 96068-01 96071-01 96115-01 94011-04 94110-40 94011-02(2) 94011-20(2) 94150-40 Engine Price All All All All All All All All All All All All All All All All All All All $74.65 $129.95 $162.95 $162.95 $387.50 $344.95 $255.45 $129.95 $74.65 $109.95 $103.95 $72.65 $72.65 $74.85 $74.85 $74.85 $126.95 $126.95
S-35-V35, A, B, C33A, E33A, C, F33A, C, 36 A36 19A E50, G50, H50, F50, J50 56TC, A56TC 58P 58TC A24, A24R, B24R, C24R, D55, D55A, E55, E55A, 58, 95-C55, 95-C55A 99-55, 95-A55, 95-B55, 95-B55A C35-G35 60, A60, B60 65, A65, 65/80, 65/88, 65-A80, 65-B80, 70 76 95, B95, A, D95A, E95
Note: (1) Denotes 1ea. per engine. (2) Denotes 2 ea. per engine. All others require 4 engine
GULFSTREAM
Aircraft Model 111 P/N 94011-02(02) 94011-20(02) 94011-02(02) 94011-20(02) 94110-01 94110-40 94110-40 94110-40 94001-01 94110-40 94011-20 94011-20 Engine Price All All All All All All All All All All All All $109.95 $103.95 $109.95 $103.95 $118.95 $74.65 $74.65 $74.65 $175.95 $74.65 $103.95 $103.95 Skymaster Skynight Common Name 310B, C 320, A thru C 320D, E, F ALT. 336 337, A thru F Aircraft Pressurized Centurion P210N, R Turbo Centurion T210J thru N
94031-01 (1) 94031-02 (1) 94030-01 (2) 94021-01 (1) 94021-02 (1)
IN EL AV TO PS BV
Common Name Cirrus Cirrus Cougar Tiger
112, B, T, TC, TCA Twin Commanders 500 500A 560A, E, F 680, E, F, FL, FLP 685 720 GA-7 AA5B
Note: (1) Denotes 1ea. per engine. (2) Denotes 2 ea. per engine. All others require 4 engine * AIRCRAFT SERIAL NUMBERS
VANS
Aircraft P/N Common Name RV-3 RV-4 RV-6 Model 94011-20 94011-20 94011-20 All All All $103.95 $103.95 $103.95 Engine Price
P337H T337, B thru F 340, A 401, A, B Business Liner 402, A thru C Titan 404 411, A
CIRRUS DESIGN
Aircraft Model SR20 SR22 P/N 94006-01 94001-01 Engine Price All All $159.50 $175.95
Chancellor
414, A
Note: (1) Denotes 1ea. per engine. (2) Denotes 2 ea. per engine. All others require 4 engine
346
MAULE
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PIPER
Aircraft Common Name Model Cherokee 140 PA28-140 PA28-140 PA28-140 Cherokee 150 PA28-150 Cherokee 160 PA28-160 Warrior Warrior PA28-151 PA28-161 P/N 94150-01 94011-02 (2) 94011-20 (2) 94011-02 (2) 94011-20 (2) 94150-01 94150-01 94011-02 (2) 94011-20 (2) 94011-02 (2) 94011-20 (2) 94150-01 94150-01 94110-02 94011-20 94011-20 94011-20 94011-20 94011-20 94011-02 94110-01 94110-01 94011-04 94110-02
MOONEY
P/N 95167-01 94150-01 Engine Porche 0-360-A1A IO-360-A1A IO-360-A1A Price $738.00 $74.85 $109.95 $109.95 $103.95 TSIO-360 ALL 0-360-A1A, D 0-360-A1A $159.50 $414.95 $72.65 $74.85 $72.65 $72.65 $72.65 $72.65
Chaparral(Super 21) M20E 1965 & Newer 94011-02 Executive 201 231 M20F M20J M20K CAP231 M20A M20A Master Ranger Ranger Mark 21 Statesmen M20D M20B M20C M20G 94011-02 94011-20 94006-01 94016-44 94150-40 94150-01
Cherokee180 PA28-180 PA28-180 Cherokee Six PA32-300 Archer Archer II Arrow Arrow II Arrow III Dakota PA28-180 PA28-181 PA28R-180 PA28R-200 PA28R-200 PA28R-201 PA28-236
Turbo Arrow II PA28R-201T 94006-01 Turbo Arrow III PA28R-201T 94006-01 Comanche 250 PA25-250 Comanche 260 PA24-260 Comanche 400 Lance II Saratoga Saratoga S.P Tomahawk Brave Pawnee 235 Pawnee 260 PA24-400 Cherokee Lance PA32R-300
LANCAIR
P/N 94150-41 94150-41 94150-41 94001-01, (2) 94011-20, (2) 94017-01 94001-01 Engine 0-235 0-320 0-320, 0-360 TIO-550, TIO-520 TIO-550, TIO-520 All IO-550 Price $118.95 $118.95 $118.95 $175.95 $103.95 $177.95 $175.95
PA32RT-300 94110-02 PA32-301 94011-02 (2) 94011-03 (2) PA32R-301 94011-02 (2) 94011-03 (2) PA38-112 PA36-300 PA25-235 PA25-260 94150-01 94110-02 94110-01 94110-01
Note: (1) Denotes 1ea. per engine. (2) Denotes 2 ea. per engine. All others require 4 engine
SIAI MARCHETTI
Aircraft P/N Common Name Model F260 S208 94110-01 94110-01 All All $118.95 $118.95 Engine Price
SOCATA
Aircraft P/N Common Name Rallye Model 235C, E 94011-20 0-540-B4B5 $103.95 Engine Price
Note: (1) Denotes 1ea. per engine. (2) Denotes 2 ea. per engine. All others require 4 engine * AIRCRAFT SERIAL NUMBERS
347
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AVIAT
A-1 S-1 S-1S, -2A
These compression type couplings consist of bonded rubber joints pressed into the sockets of metal hubs. These dynafocal engine suspensions provide proper flexible support to isolate engine vibrations and reduce noise transmission to airframe structure in all aircraft applications. Careful design assures maximum strength to hold the engine under ultimate load and emergency conditions. Suspensions also distribute loads in most desirable patterns, control engine motions, accommodate thermal expansion and manufacturers tolerances.
PROMPT SHIPPING GUARANTEED! IF YOU REQUIRE UNLISTED LORD MOUNTS, PLEASE CALL US FOR YOUR BEST PRICE. WE BEAT ALL COMPETITORS PRICES! LET US KNOW OF ANY LOWER PRICE AND WE WILL BEAT IT!
Aircraft Model Application/ Engine Lyc. O-360-C1G/A1P Lyc. O-320 Lyc. O-360-B4A, A1P Lyc. O-320-E2C Lyc. O-320-E2D Lyc. O-360-A4G Cont. IO-346-A Lyc. IO-360-A2B Lyc. O-360-A4K Lyc. IO-360-A2B Lyc IO-360-A1B6 Cont. IO-470-K Cont. IO-520-B Cont. IO-470-K Cont. IO-520-BB Cont. IO-470-N Cont. E185-8 Cont. E185-11 Cont. E225-8 Cont. O-470-G Cont. IO470-C Cont. IO-470-N or-C Cont. IO-520-BB Cont. IO-520-BB Cont. TSIO-520-UB Cont. TSIO-520-D Lyc. GO-435-C2/C2E Lyc. GO-480-F1A6 Lyc. GO-480-G2F6 Lyc. GSO-480-B1B6 Lyc. IGSO-480-A1B6 Cont. IO-470-L Cont. IO-470-L Cont. IO-520-CB Lyc. TIO-541-EIB4 Cont. IO-520-CB Cont. IO-550-C Cont. TSIO-520-L/-LB Cont. TSIO-520-WB Cont. TSIO-520-L/-LB Cont. TSIO-520-WB Lyc. TIO-541-EIC4 Lyc. IGSO-480-AIE6 Lyc. Lyc. Lyc. Lyc. TO-360-CIA6D O-360-AIG6D O-235-L2C IGSO-540-AID No. per A/C 8 8 8 4 4 4 4 4 4 2 ea* 2 ea* 4 4 4 4 4 8 4 4 4 4 4 4 4 4 4 8 8 4 4 4 8 8 8 8 8 8 8 8 8 8 8 4 4 2 ea* 2 ea* 4 4 4 6 Part No. J-1552 J-7401-2 J-7401-2 J-7402-16 J-7402-16 J-7402-16 J-10778-4 J-10778-4 J-7402-16 J-10778-14 J-10778-16 J-7518-2 J-10520-1 J-7518-2 J-10520-1 J-10520-1 J-2245-1 J-3804-26 J-3804-26 J-7518-2 J-7518-2 J-7518-2 J-10520-1 J-10520-1 J-10520-1 J-10520-1 J-3804-10 J-3804-10 J-3804-10 Use J-7525-1 & J-6545-1 J-7518-2 J-9613-5 J-10778-16 J-9613-9 J-10778-16 J-10778-16 J-12453-12 J-12453-12 J-12453-12 J-12453-12 J-9613-9 J-7525-1 J-6545-1 J-9613-49 J-9613-50 J-7402-1 J-7525-1 & J-6545-1 LM427SA7 Price Each $39.95 $44.95 $44.95 $95.50 $95.50 $95.50 $226.95 $226.95 $95.50 $419.50 $231.95 $139.95 $156.95 $139.95 $156.95 $156.95 $107.95 $144.95 $144.95 $139.95 $139.95 $139.95 $156.95 $156.95 $156.95 $156.95 $178.50 $178.50 $178.50 $93.95 $104.95 $139.95 $279.50 $231.95 $219.00 $231.95 $231.95 $155.95 $155.95 $155.95 $155.95 $219.00 $93.95 $104.95 $145.95 $115.95 $97.50 $93.95 $104.95 $562.00 $562.00 $562.00 $97.50 $97.50 $562.00 $3,456.00 $3,456.00 $562.00 $562.00 $562.00 $225.00 Aircraft Model Application/ Engine Lyc. IO-540-K Lyc. IO-540-KIE5 Lyc. IO540-G, K Franklin 2A-120A, B Cont. O-200-A Lyc. O-235-C1 Lyc. O-320-A2B Lyc. O-320-A2D Lyc. O-320-E2A Franklin 2A-120A, B Lyc. O-360-C1E Lyc. O-360-C2E Lyc. O-360-C2E Lyc.IO-320-E1A Lyc. AEIO-320-E1B Lyc. AEIO-320-E2B Lyc. AEIO-360-H1A Cont. C-85 Cont. C-90 Cont. O-200-A Lyc. O-235-L2C Lyc. O-320-E2D Cowl Mount Cowl Mount Cowl Mount Cowl Mount Lyc. O-320-D2J Lyc. O-320-H2AD Cont. IO-360-K Lyc. O-360-A1F6 Lyc. O-360-AL/N Cowl Mount Cowl Mount Cont. GO-300-E Cont. IO-360-D Cont. GO-300-A Cont. GO-300-C, D Cont. GO-300-E Lyc. O-320-E2D Lyc. O-360-A2F Lyc. O-360-A1F6D Lyc. IO-360-A1B6 Cont. O-470-A, J Cont. O-470-K Cont. 0-470-K, R Cont. O-470-R, U Cont. O-470-R, U Accessory Mount Panel Mount Lyc. O-540-L3C5D Lyc. O-540-L3C5D Cont. IO-470-F Cont. IO-520-D Cont. IO-520-D Cont. O-470-R Cont. IO-520-D No. per A/C 4 4 4 8 8 4 4 4 4 8 4 4 4 4 4 4 4 8 8 8 4 4 ----4 4 4 2 ea* Part No. Price Each $199.50 $199.50 $199.50 $15.50 $15.50 $119.95 $119.95 $119.95 $119.95 $15.50 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $15.50 $15.50 $15.50 $97.50 $145.95 $17.75 $17.75 $26.50 $49.50 $145.95 $145.95 $121.95 $145.95 $203.95 $145.95 $203.95 $26.50 $49.50 $104.95 $121.95 $104.95 $104.95 $104.95 $145.95 $145.95 $145.95 $197.50 $167.95 $188.00 $104.95 $104.95 $104.95 $104.95 $27.85 $12.90 $135.95 $135.95 $104.95 $104.95 $104.95 $104.95 $104.95
BELLANCA
17-31, 17-31A 17-31A 17-31TC,17-31ATC 7ACA 7ECA 7ECA 7GCAA, 7GCBC 7GCAA, 7GCBC 7KCAB 7KCA 8GCBC-CS 8GCBC-FP 8GCBC 8KCAB 8KCAB-CS 8KCAB-FP 8KCAB-180 J-9868-5 J-9868-5 J-9868-5 J-3608-1 J-3608-1 J-6230-1 J-6230-1 J-6230-1 J-6230-1 J-3608-1 J-6230-1 J-6230-1 J-6230-1 J-6230-1 J-6230-1 J-6230-1 J-6230-1
BEECHCRAFT
19 B19, M19A 23 23 A23-24 C-23 24,A24,A24R,B24R C-24R B33, C33 C33A E33, F33 E33A/C, F33A/C G33 35, A35, B35 C35, D35, E35, F35 E35, F35, G35 H35 J35, K35, M35 N35, P35 S35,T35,V35,V35A,B 36, A-36 A36TC V35A-TC B50 C50 D50, D50B/C/E E50, F50, G50, H50 G50, G50, J50 55, A55, B55 55, A55, B55, B55A C55(1967), D55, D55A,E55,E55A 56TC, A56TC 58 58 (1984-on) 58P 58P 58TC 58TC 60, B60 65, A65, 70 76TC 76 77 80, A80, B80, 88 C90, C90A E90, F90
CESSNA
120-140 140A 150, 150A-L 152, 152 Aerobat 172 I-P 172P F172P F172P F172 172 172N 172 172RG 172Q 172P,Q 172 P172 R172E,K 175 175A, B 175C 177 177A 177B 177RG 180 180 180A-H 180H, J 182, 182A-R 182, 182A-N 182H-N T182 TR182 185, 185A-E 185 A185F 188 188 J-3608-1 J-3608-1 J-3608-1 J-7402-1 J-9613-49 J-7444-14 J-7444-14 J-7444-24 J-7444-36 J-9613-49 J-9613-49 J-9613-42 J-9613-49 J-9613-72 2 ea* J-9613-49 J-9613-72 -- J-7444-24 -- J-7444-36 4 J-6545-1 4 J-9613-42 4 J-6545-1 4 J-6545-1 4 J-6545-1 4 J-9613-49 4 J-9613-49 4 J-9613-49 4 J-9613-59 2 ea* J-3804-14 J-3804-15 4 J-6545-1 4 J-6545-1 4 J-6545-1 4 J-6545-1 -- J-14290-4 -- J-6984-64 4 J-9613-12 4 J-9613-12 4 J-6545-1 4 J-6545-1 4 J-6545-1 4 J-6545-1 4 J-6545-1
PWC PT6A-21 PWC PT6A-28,-135,6 LM427SA7 135A H90 PWC PT6A-34B 6 LM427SA7 95, 95A, 95B Lyc. IO-360-B1B 8 J-7402-1 D95A, E95 Lyc. IO-360-B1B 8 J-7402-1 A100 PWC PT6A-28 6 LM427SA7 B100 GA TPE331-6-252B 4&2* LM821SA49 LM821SA50 200, 200C, 200CT PWC PT6A-41 8 LM427SA7 A200/C/CT PWC PT6A-41 8 LM427SA7 B200 PWC PT6A-42 8 LM427SA7 C90,E90,C99,200/C /CT, Overhaul kit for Barry 8 LM427SA12 A200/C/CT, B200/C/CT/T Controls P/N5906-2SA5
348
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
J12453-1 J12453-2
$155.95 $163.95
J-6545-1 J-12453-1 J-12453-2 J-6984-64 J-12453-1 J-12453-2 J-6545-1 J-12390-1 J-12390-1 J-9613-58 J-9613-58 J-7764-4 J-9613-58 J-9613-31 J-9613-31 J-9613-31 J-9613-58 J-9613-58 J-9613-58 J-9613-58 J-9613-58 J-9613-54 J-9613-54 J-9613-58 J-9613-54 J-9613-54 J-9613-40 J-9613-53 J-3804-28 J-6113-5 J-6113-5 J-7402-24 J-7402-24 J-7402-24 J-7402-24 J-9613-49 J-9613-59 J-6230-1 J-7402-16 J-7402-1 J-7402-1 J-7402-1 J-7402-16 J-9613-12 J-9613-12 J-7402-1 J-10520-1 J-9613-40 J-9613-58 J-9613-75 and J-9613-76 J-7518-4 J-6230-1 J-6230-1
PA-31-310 PA-31-325 PA-31-350 PA-31P-350 PA-31T-1, -500 PA-31T-620 PA-31T-620XL,-31T2 PA-32-260 Lyc. O-540-E4B5 PA-32-260 (s/n Lyc. O-540-E4B5 570-up) PA-32-300 Lyc. IO-540-K1A5 PA-32-300 Lyc. IO-540-K1G5, K1A5 PA-32R-300 Lyc. IO-540-K1G5D PA-32R-300 (s/n 141-up) Lyc. IO-540-K1G5D PA-32RT-300 Lyc. IO-540-K1G5 PA-32RT-300T PA-32-301 PA-32R-301 PA-32-301T PA-32R-301T PA-34-200 PA-34-200, 200T PA-34-220T PA-36-285 PA-36-300 PA-38-112 PA39 PA-44-180 PA-44-180T PA-46-310P PA-46-350P PA-60-360 PA-60-600A PA-60-600B PA-60-601P Lyc. TIO-540-51AD Lyc. IO-540-K1G5D Lyc. IO-540-K1G5D Lyc. TIO-540-S1AD Lyc. TIO-540-S1AD Lyc. L/ IO-360-C1E6 Cont. TSIO-360-E, EB Cont. L/ TSIO-360-KB Cont. 6-285 Lyc. IO-540-K1G5 Lyc. O-235L2C Lyc. IO-320-B1AC1A Lyc. 0-360-E1A6D Lyc. T0-360-E1A6D Cont. TSIO-520-BE Lyc. TIO-540-AE2A Lyc. IO-360-E1A Lyc. IO-540-K1F5 Lyc. IO-540S1A5 Lyc. IO-540S1A5
$135.95 $135.95 $144.95 $129.95 $889.00 $889.00 LM-423-SAI2 $806.50 J-7402-20 $104.95 J-3804-27 $136.95 $136.95 $128.95 $183.95 $128.95 $128.95 $157.95 $352.95 $146.95 $135.95 $146.95 $289.00 $133.95 $207.95 $207.95 $499.50 $183.95 $95.50 $146.95 $133.95 $133.95 $289.00 $289.00 $146.95 $219.00 $219.00 $219.00
J-3804-27 J-3804-40 J-3804-31 J-3804-40 J-3804-40 J-3804-37& J-3804-39 J-9613-19 & J-9613-12 J-9613-19 & J-9613-55 J-9613-40 J-9613-58 J-9613-58 J-14090-7 J-3804-31 J-7402-16 J-9613-19 J-9613-40 J-9613-40 J-9613-55 J-9613-55 J-9613-12 J-9613-9 J-9613-9 J-9613-9
PIPER
PA-23 PA-23-160
COWL MOUNTS
Cessna150,172,177 ........................... P/N J-7444-14 .................... $17.75 Cessna 182 ........................................ P/N J-7444-24 .................... $26.50
349
ENGINE MOUNTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Standard rings furnished with 2-3/4 I.D. retainers, completely welded, ready for mount assembly. The Dynafocal ring kits contain all tubing cut and bent, with 2-3/4 I.D. retainers, ready to weld. Dynafocal Ring for Lyc. 0-235 to I0-360 (200 HP) ....... P/N 33521.... $197.00 Dynafocal Ring for Lycoming 0-320B........................... P/N 33521-B $308.95 Dynafocal Ring Kit for Lyc. 0-235 to I0-360 (200 HP) . P/N 33522.... $149.85 Retainer Cups & Rings Kit ........................................... P/N 33253.... $104.50 (includes 8 cups & 4 rings - everything in #33522 kit above except the tubing) Engine mount ring for most Lyc. l0-540s...............P/N 08-00795 ..... $294.00
This ring mount for Rotax 912/914 engines is 4130 chrome-moly construction, powder coated, and fits all 912 and 914 engines. Not FAA approved, but built using the same processes and quality control required for certified parts. Standard color is white. Options include additional clearance for a 12-volt high-amp starter cable connection and powder coating in other colors. The mount is furnished with installation instructions and the required shim washers recommended by Rotax. Mounting hardware is not included. Rotax 912/914 (WHITE) P/N 08-07113 ........... $656.00 Rotax 912/914 Special Color P/N 08-07152 ........... $923.00
Sandwich assemblies of natural rubber and specially blended synthetic compounds bonded to 2 metal plates. Normal installation requires 4 assemblies, each consisting of 2 sandwich mountings and 1 spacer. Satisfactory performance requires that the spacer be designed to the correct length to precompress each mounting to guarantee proper positioning of the mountings. Set consists of eight bonded sandwich mountings equivalent to Lord Mount No. J-7402-5 (2 Dia.) and four 4130 steel spacers with mounted rubber shoulder. Use with dynafocal engine mount rings using 2-3/4 I.D. retainer cups. Used on many homebuilts including the Defiant and Long-EZ ......P/N 08-03500 .........$449.00 Designed for use on aerobatic aircraft such as Christen Eagle and Acro. Same style as homebuilt type but inner core has been beefed up and elastomers added to encapsulate the spacer. 2-inch diameter. Includes a set of 8 Mounts and 4 spacers to make one complete engine set of 4. Note: Mounting hole is 7/16 and requires AN7 bolts for installation. 50401-300 w/4 Spacers ..............................P/N 08-03600 .........$247.00 DISCOUNT: LESS 10% ON 6 SETS, 15% ON 10 SETS, 20% ON 20 SETS
Barry Controls is a manufacturer of many aircraft engine mounts of both experimental and certified types. They also manufacture engine mounts for experimental and kit airplanes of various makes and models. Please call or visit our website for application information. P/N 94016-08...........................$437.95
These new bushings offer superior damping qualities and do not harden over time as original mounts can do. They are molded from hi-tech silicone rubber which offering a much lower compression set which reduces engine sagging over time. Silicone also withstands a very wide temperature range and is compatible with grease and oil. These mounts are not PMAd or FAA approved and are for use on experimental aircraft only. Not an approved replacement for Lycoming 71032 bushings. Sold in set of 8 bushings. P/N 08-00662 ................... $39.50 /Set
These Lord J-7402-24 mounts fit the engine mount for Lyc. 0-360 manufactured by CG Parts. P/N 07-01115 .........$112.95
All altitude mounts for vibration isolation and shock prevention in all directions. Available in soft, medium, or hard rubber. Soft .............................P/N 08-07049 ..............$15.75 Medium .......................P/N 08-01013 ..............$12.75 Hard ............................P/N 08-07050 ..............$10.75 Snubbing Washer .......P/N 9810145-01804 ......$1.24 LORD Flex-Bolt Sandwich Mounts are designed to protect equipment and machinery against damaging vibration. These mounts provide high loadcarrying capacity and assure long life. Provide lowcost mounting systems which are compact, lightweight, easy to install and maintenance-free. Model C D Thread Part No. Price J-4624-45 .75 .75 5/16-18 10-01557 $6.75 J-4624-57 .75 .62 5/16-18 08-07196 $6.25
The SK2003A Series Mounts were specifically designed around the latest generation Cessna/Lord J7444-42 Series Mount. The SK2003-14A, -24A, and -42A all have the same flex feature as the J7444-42. They look and install exactly the same as the Cessna/Lord part it replaces using the same fastener length. The SK200314A, -24A, and -42A are fixed depth, Non-Adjustable Platemounts. The -14ADJ, -24ADJ, and -42ADJ are adjustable and can be adjusted without removing the cowling for an exact fit. Model Application Part No. Price SK2003-14A Cessna PN J7444-14. Used On - 08-07222 $14.65 67-On C150 (10ea), 67-86 C172 SK2003-14ADJ (11ea), C172XP (13ea) 68-78 08-00663 $21.75 C177 (14ea) SK2003-24A Cessna PN J7444-24. Used On - 08-07223 $15.95 SK2003-24ADJ 73-86 C182 (14ea) 08-00664 $21.95 SK2003-42A 08-07208 $19.85 Cessna PN J7444-36 and -42. SK2003-42ADJ Used on -97, C172 R & S (14ea) 08-00665 $22.75 SK-SP5 SKYBOLT CLOC TOOL - Adjust CLoc 4000 Series Adjustable Receptacle and Mounts. .................. P/N 08-07210 .......................$39.90
These engine mount bushings are made of a special urethane formula which outlasts most other mounts. They have been in use on O-540, IO-540 and TI-540 series engines for years, and are now available to the experimental aircraft market. Includes two bushings, one spacer and two washers. Specifications: These small ear type bushings are applicable to the following engine models: O-540A1A, -A1A5, -A1B5, -A1C5, -A1D, -A1D5, -A2B, -A3D5, -B1A5, -B1B5, -B2B5, -B2C5, -B4B5, -C1B5, -E4A5, -E4B5, -E4C5, -G1A5, G2A5, -F1A5, -F1B5 IO-540-A1A5, -B1A, -B1A5, B1C5, -C1B5, C4C5, -D4A5, -E1A, -E1A5, -E1B5, -E4A5, -G1A5, -G1B5, -G1C5, -G1D5, -G1E5, -G1F5, -D4A5, -K1A5, -K1A5D, -K1B5, -K1C5, -K1d5, -K1E5, -K1F5, -K1G5, -K1G5D, -K1J5D, -T4A5D, -T4B5D, -N1A5, -R1A5, -S1A5, -C4D5D TIO-540-A2C, -S1AD P/N 08-07393 ...........$29.95
Lord Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide uniform stress distribution. This, plus high strength bonding and the use of specially compounded elastomers, provides maximum service life. Square 24 lb........................ P/N 08-07183 .................... $8.45 Square 30 lb........................ P/N 15-05391 .................. $14.25 Holder 30 lb......................... P/N 15-06524 .................. $34.00 Holder 45 lb......................... P/N 15-05499 .................. $73.95
These engine mount bushings are made of a special urethane formula which outlasts most other mounts. They have been in use on smaller 4 cylinder Lycoming engines from the 0-235 series to the GO-480 series for years, and are now available to the experimental aircraft market. Specifications: These cone type mounts are applicable to the following engine models: O-235-C1, -C1B, -C2A, -C2C, -F, -F1B, -G2A, O-290-D, -D2, -D2B, -D2C, O-340-A, O-340-B, O-320-A2A, -A2B, -A2C, -A3A, -A3B, -A3C, -B2A, -B3A, -B3B, -B3C, -E1A, -E2A, IO-320-E2A, O-435-A, -A2 GO-480-B, -B1A6, -B1B, -B1C, -B1D, -C1B6, -D1A, -F6, -F1A6, -F2A6, -F4A6, -G1A6, -G1D6, -G2D6, -G2F6, -G1H6, -G1J6. P/N 08-07392 .............$5.95
350
EXHAUST COMPONENTS
STAINLESS STEEL FIREWALL PENETRATION KIT 3/4
Expanded on short leg to slip over a 2" O.D. tube to divert air in two directions. Especially handy for close to the firewall applications. Also available with non-expanded short leg. Weight is 1.7 ounces. P/N 08-07304 ..................$31.75
T TUBE CONNECTOR
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
During the testing phase of our all stainless steel heater bypass box, we were astounded at the affects of a simulated engine fire on aluminum firewall components. Watching how fast the aluminum melted away (only 16 seconds) took us by surprise. It became very apparent that fireproofing the firewall was more important than most people realize. After many months of trial and error, a fireproof pass through was designed. The firewall Penetration Kits offer a fireproof method of getting wires and cables trough the firewall in a clean, professional looking manner that allows easy removal for replacement if necessary. Testing was initiated on most common methods of wire and cable penetrations available on the market. Simulated engine fire was directed at the stainless shields with rubber grommets, high temperature silicone, eyeball fittings, plain rubber grommets and several untried methods. All failed the fire test with the exception of the steel eyeball, and it only accepts one cable. The kit comes complete with stainless steel fabricated fitting, fire sleeve tubing, two ALL stainless steel hose clamps and a tube of fire block sealant to seal the ends from moisture and gasses. Includes installation instructions. Fireproof seal of the firewall for penetration of wires and cables. Seals out moisture and gasses. Easy replacement of wires and cables if necessary. Very clean looking installation. Available in three sizes. To determine the size you need, plan where you want to run your wire and cable bundles. Use a tie strap or twist tie to bundle the wires and cables. Measure what size holes the bundle will fit through and choose the NEXT LARGER size (see installation instructions.) You need enough clearance between the bundle and stainless fitting to push the second fire sleeve into the fitting creating the fireproof, chafe proof seal. Typical installation. Wires can be run straight out or turned back to attach on firewall reducing vibration. There are so effective that they received an STC under Advisory Circular AC 20-135 Power plant Installation and Propulsion Systems Component Fire Protection Test Methods, Standards and Criteria. Firewall Penetration Kit 3/4" ......................P/N 09-00978 ............ $44.50 Firewall Penetration Kit 1/2" .....................P/N 09-02601 ............ $36.95 Firewall Penetration Kit 1" .........................P/N 09-00979 ............ $47.65
With 2 offshoot. If you are running 2.5 tubing in one area and 2 to another, this is your part. Weight is 1.8 ounces. P/N 08-07303 ..................$38.90
This is a DL-010 Y Tube, modified with a shut-off valve in the straight run tube. The shut-off valve enables the builder to divert the flow of air from the straight tube and direct all or part of the air flow to the angled tube. Furnished with one stainless steel hose clamp. Weight is 2.9 ounces. P/N 08-07296 ..................$59.85
This is a direct replacement for the VA175 (Vans part number). The VA175 directs warm air in the RV-10 tunnel to both sides equally. With the Modified VA175, air can be directed all to one side, partially to one side, or both sides, through the controllable (cable actuated) flapper on the inside of the unit. P/N 08-07306 ..................$59.95
Three models of the all stainless steel heater bypass boxes are offered. The engine side control lever comes with a backing plate that attaches to the cabin side of the firewall and has a 2 inch scat tube outlet so a tube can be attached in the cabin that directs air where wanted. All stainless steel construction offers a fireproof closure in case of an engine fire. New flapper design offers better seal to keep out hot air when closed.
Expanded on one end to 2 I.D. to slip over a 2 O.D. tube to regulate or shut off air. Also available non-expanded for in-line applications. Weight is 2 ounces. P/N 08-07305 ..................$67.50
HEATER BYPASS VALVE WITH CABIN SIDE CONTROL LEVER FOR RV-7, RV-8 AND RV-9
P/N 08-01311 ..............$96.00
HEATER BYPASS VALVE WITH ENGINE SIDE CONTROL LEVEL P/N 08-01311-1 ...........$94.50
Over the years we have seen failure of the rivets that hold the exhaust heat shield to the mounting bracket. The solution was to spot weld the stainless steel mounting bracket to the stainless steel heat shield thus eliminating the possibility of rivet failure. Adding additional spot welds insures reliability. They are offered in two sizes, 2 inch and 4 inch to cover most applications. Exhaust Shield 2 P/N 08-07351 ..................$11.50 Exhaust Shield 4 P/N 08-07352 ..................$12.95
EXHAUST SHIELDS
351
EXHAUST COMPONENTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CESSNA RISER HALF CLAMP 0750161-25
Cessna Riser Half Clamp 0750161-25, for Cessna 172R and 172S. P/N 05-04890 ......................$54.75 These boxes were developed for builders who want a simple, light, all stainless box that will fit in tight places, as it does not extend forward of the firewall as far as a standard box. Shown in the photo is a left unit. The box is available in both left and right units. The hole spacing is correct for the pre-punched holes in the RV-10 firewall, but they can be mounted on any firewall. For ease in cable routing, the arm on the box is adjustable using the provided lock nuts. Everything in the unit is stainless steel, including bushings and rivets. It is furnished with a closed-cell silicone gasket. Weight is 9.8 ounces. Please note that these boxes are a direct replacement for the aluminum box available from Vans. The RV-10 uses both a left and a right unit, and they also can be ordered separately. If you are not sure which one(s) you need, refer to your firewall plans drawings. Right ...............................P/N 08-04958 .............$139.50 Left unit is a special order part. Please contact us to order.
This unit is designed to slide over the end of the 2 O.D. tube protruding from a cabin heat box that extends through the firewall. The short end of this unit is expanded to 2 I.D. Two stainless steel clamps are furnished with the unit. If you use scat tube, the 90 angle allows you to run the scat tube parallel to the firewall and away from undesirable areas (brake pedals, etc.) Constructed of seamless 6061T4 .028 wall tube. Weight: 1.4 oz. P/N 08-00863 .......... $26.50
2 DIAMETER 90 TUBE
This box is identical to the deluxe stainless steel cabin heat box, except that the inlet is 2 OD so that it can be used on larger heat muff applications where the builder is using 2 scat tubing. This box is currently being used on the MICCO certified aircraft. Weight is 7.2 ounces. P/N 08-04013 ........ $119.95 P/N DL-008 - 2.5" inlet and 2.5" outlet. The inlet is positioned 90 degrees to the outlet, versus straight through in all of our other boxes. The mounting plate, shaft, flapper and bushings are all stainless steel. The rest of the box is anodized aluminum. This box is certified and is the box currently being used on all Cirrus aircraft. Furnished with silicone gasket. Weight is 6.3 ounces. Certs are available from us. P/N 08-04959..............$258.95
Y tube is designed to be used with the Homebuilders cabin heat box to make warm air available to 2 or more locations in the aircraft. Constructed of seamless 2024T6 tube, it weighs only 2 oz. These tubes are expanded to 2 I.D. on the inlet end to slip over and clamp to the 2 O.D. tube of the cabin heat box. Due to the very light weight, Y tubes can be installed in scat tubing as well as attaching directly to cabin heat boxes. One stainless steel clamp is included with Y tube. Due to the light weight of only 1.7 oz., the non-expanded Y-tube can be placed anywhere in a run of tubing to give more options for heating additional areas of the aircraft. Furnished w/2 stainless steel hose clamps Standard Y tube....................................P/N 08-04100 .......... $31.85 Non-expanded Y tube...........................P/N 08-04130 .......... $29.85
2 DIAMETER Y TUBE
This in-line valve connects to 2 SCAT ducting. It comes complete with cable end and can be hooked up in any combination to direct air to either heater outlets or defrost outlets. Actuating lever is adjustable to any position. Very popular on RVs & other homebuilt aircraft. P/N 08-00053 ........ $107.95
P/N DL-015 - This box is identical to the standard cabin heat box, P/N DL-001, except that the air intake is parallel to the firewall rather than coming straight in from the heat muff. This gives the builder the option of running scat tube parallel to the firewall. Total weight is 5.2 ounces. Furnished with a flange gasket and four mounting rivets. Can also be bolted to firewall. P/N 08-04957 ....................$109.50
These superior quality heat muffs are made entirely of 6061 and 5052 aircraft grade aluminum, offset from the center to clear the close cowling of most homebuilts. The muff can be installed anywhere on P/N 08-03900 the exhaust system where there is 12 of straight pipe, baffle, or even on an aft vertical baffle. The reason for using forced air through the muffs rather than just taking warm air from the low pressure plenum is that in order to have cabin heat you have to have forced air. The muff is constructed so that it can be used for either cabin heat or carb heat, or P/N 08-00473 both, as there is 1 outlet & 1 inlet. The muff is split and piano-hinged to clam-shell over the exhaust pipe. This is necessary if you have downturns on your exhaust pipes and do not want to cut off the downturns should you later want to remove the muff. Stainless steel clamps are furnished with the muff. Inlet and outlets are 2 dia. and will fit 1.75 dia. pipes. The standard 9 body has 1 inlet & 1 outlet and generally used for cabin heat (wt:10.4 oz.). The shorter 6.5 body 1 inlet & 1 outlet and generally used on the front crossover section of the exhaust to duct heat to the carburetor box (wt: 8.9oz.). Standard 9 body .......... P/N 08-03900 .....$126.95 Standard 6.5 body ....... P/N 08-00473 .....$126.95
Aluminum muffs for models 7AC and 11AC exhaust stacks. Fit either left or right side. P/N 05-08715..........$209.95
Heli-arc welded aluminum muff with rustproof stainless steel fins for clamping to stack. Similar in design to the new Cessna type. Furnished with attaching clamps. Muff w/2 Outlet ...................... P/N 08-02400 ....$82.00 Muff w/ 2.5 Outlet .................. P/N 08-02500 ....$81.75
352
P/N DL-002 - This cabin box is our first modification to our standard heat box. The only difference between this and the standard is that the deluxe cabin heat box has one inlet and two outlets; the second outlet must be used to dump and route, via 2 scat tube, the warm air away from the low plenum area when heat is not being used in the cabin. (It is very important not to run the dump tube to another box on the other side of the firewall, because a constant flow of air is necessary to ensure that the heat muff does not overheat.) The weight on this unit is 5.5 ounces. P/N 08-04005 .......$120.95
P/N DL-001 - This cabin heat box has been engineered to be the smoothest, most efficient and lightest heat box built. Fabricated from aircraft-grade aluminum with stainless steel shaft, arm and flapper. Originally designed for use on the popular RV-4 homebuilt, but is applicable to most other designs. Total weight is only 5.2 ounces. Furnished with a gasket flange for the forward side of the firewall for leak-free ducting of warm air to anywhere the builder wants it. Inlet and outlet are 2 inch OD 6061-T4 seamless alum. The body of the box is constructed of 5052-032 alum. The outlet tube extends through the firewall so that scat tubing can be attached to route the warm air. Superior craftsmanship and quality. Over 4,000 sold to date. P/N 08-04000 ................$106.95 ea.
CM WP ME HA
View 3
This air grid carburetor heat box designed to fit the Piper PA-15 Vagabond. Dimension: 11 x 3-1/2 x 4 P/N 08-06290 ...............$175.95
AP LG EP
P/N DL-005 - This box is identical to the deluxe stainless steel cabin heat box, except that the inlet and outlet are 2 OD so that this box can be used when the builder wants to use 2 scat tubing throughout the project. (This box was used on the Cirrus SR20 certified aircraft. The SR20 now uses the DL-008 box listed below.) Weight is 6.3 ounces. P/N 08-04015 .......$129.50
TUBING CONNECTORS
2 ALUMINUM FLANGE - Accepts 2 scat tube. Flange
allows riveting to firewall, baffles, etc. Wt: 0.2 oz. P/N 08-04135 ............... $9.90
CS IN EL AV TO PS BV
P/N DL-006 - This box was recently developed in response to customer requests. With the exception of brass shaft bushings, this box is constructed entirely of stainless steel, including all SS blind rivets. Like the deluxe boxes, this unit has a 2 inlet and 2 outlets. For the added durability of all stainless steel, the box still only weighs 10 ounces. P/N 08-04025 ...............$139.50 ea.
The carburetor heat box and air grid are designed specifically for the Ellison TBI P/N 08-00813 to eliminate carburetor icing problems. There must always be a constant flow of air through a heat muff. The carburetor heat box has an automatic dump of hot air View 1 when carb heat is not being used, thereby eliminating the chance of heat muff burnView 2 out. The box has a 2.5 inlet for ram air and a 2 inlet for carb heat. The box is made of 5052 aluminum, stainless steel and 6061P/N 08-00814 T4 tube. The mounting surfaces, shaft, flapper, arm and rivets are stainless. In addition, the box is strengthened in the mounting hole area to eliminate the possibility of metal fatigue. A 4 inspection/ mounting hole with a cover plate secured by nut plates and screws is locate on the bottom of the box (not visible in the photo.) The purpose of the air grid is to eliminate air flow turbulence. The 1/2 stainless steel vanes straighten the air before it reaches the throat of the carburetor and achieves better air/fuel distribution. This is a proven performance enhancement technique. Carburetor Heat Box ........................ P/N 08-00813 ..............$214.50 Air Grid ............................................. P/N 08-00814 ................$94.75 Extra Gaskets................................... P/N 08-00815 ..................$8.75
Custom built aluminum box mounts to firewall. Lever on butterfly may be attached to push-pull control for close adjustment of cabin air flow. Two 2 intake ports, one 2 outlet. Wt. 1 lb. 7-1/2 long. Fine quality construction. P/N 08-01500 ................ $113.95
Easily assembled and designed so that it can be modified for custom applications. Kit includes construction plans and directions along with installation hints for the popular Vans RV series of homebuilt aircraft. Controlled by ratchet type control cable such as ACS model A740 (P/N 05-12500). Order control cable separately. P/N 08-04460 ...................$52.85
353
EXHAUST SYSTEMS
CM WP ME HA AP LG EP CS IN EL
C-T206/T210 Aircraft C-150 OEM Part No.
Aircraft PA28-235
OEM Part No. 65012-00 65813-00 68718-03 65038-00 65039-00 67517-00 LW12127 LW12437 40310-09 40310-08 40310-10 68718-00 65038-00 65039-00 68796-00 68793-00 W15859 78463-10 78463-10 77669-02 86299-07 186 189 35-950005-1 35-950005-3 701-4 701-20 701-5 701-19 35-950004-9 35-950005-61 35-950005-57 35-950004-7 492-27 35-950005-61 35-950005-57 96-950002-55 96-950002-57 96-950002-59 96-950002-61
PA28-236
C-152 C-170B/172
PA32-260 PA32-300 PA32R-301-T PA34-200-I PA38-112 PA44-180 B-33 & 35A-G B-V35/A36
C-177 C-177RG
C-180 C-180/182
B-35H-P
B-55/58
$536.00 $506.00 $506.00 $506.00 $293.95 $292.95 $185.95 $184.95 $530.00 $530.00 $819.00 $232.95 $232.95 $561.00 $561.00 $531.00 $530.00 $625.00 $625.00 $577.00 $577.00 $611.00 $509.00 $638.00
AV TO PS BV
PA28-151/161/ 180/191 PA28R-180/200
96-950002-31 96-950002-7 96-950002-33 96-950002-9 B-Sundowner 099001-127 B-Sport 099001-126 B-Sierra 099001-131 3-1493R Bellanca Citabria 3-1493L Bellanca 8KCAB 099001-046 Bellanca 8GCBC 099001-046 Bellanca 7GCAA 099001-050 Bellanca 7ECA 099001-049 Grumann AA1 Yankee 099001-113 Grumann AA1 A&B 099001-137 Grumann AA5 Traveler 099005-148 GrumannAA5ACheetah 099005-195 Grumann AA5B 099001-191 Tiger Mooney M20 630060-501 630060-503
Riser Cyl. #3 Riser Cyl. #4 Riser Cyl. #5 Riser Cyl. #6 Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH) Muffler (OH)
08-00202 08-00203 08-00204 08-00205 08-00206 08-00207 08-00208 08-00209 08-00210 08-00213 08-00214 08-00215 08-00217 08-00218 08-00219 08-00220 08-00221 08-00222 08-00223 08-00224
Note: (N) or (OH) after description indicates New (N) or Overhauled (OH) condition. All overhauled parts carry a care charge. Please Order according to Our Part No.
354
50256
P/N A40522 for Continental A-65 through C-125. Also fits Lyc. 0-235, 0-290, 0-320 engines with MA3SPA, MA4SPA carburetors. Complete assembly includes heat box, filter, gaskets. studs and pins. Not for Certified Aircraft, Homebuilts Only.
Part No. 50256 A40599 35923 24306 24308 21323 08-01300 Price $175.95 $73.50 $8.50 $41.25 $20.50 $1.88 $498.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Thermo-Tecs new Heavy-Duty Spray Adhesive is a fast-drying, quick-bonding, high temperature contact adhesive. Use it wherever you need a secure, long-lasting, easy-to-apply bond. It is available in a generous 16.75 oz. can. P/N 08-01026 .............$13.50 Finish off a clean and well-protected Exhaust Insulating Wrap application. Will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids. The 11 oz. coating comes in black and aluminum colors. Black .........................P/N 08-06725 .............$9.85 Aluminum ..................P/N 08-06730 .............$9.95 The easiest to apply, Black Satin also requires bead or sand-blasting of all parts. It does not, however, require oven curing or burnishing. One 4oz bottle will cover one average exhaust system and will provide a long-lasting flat black finish. 4 oz. .................P/N 13-01024 ............ $17.80 This heat shield is placed on exhaust where fuel lines, cable, etc. are close to exhaust and where heat may be a problem. Mounts with stainless radiator type clamp (not included). Fits exhaust pipes up to 2.5 diameter. Very popular on RVs and other homebuilt aircraft. Single Unit ........P/N 08-00050 .......... $14.75 Double Unit ......P/N 08-00051 .......... $21.75
Component Heat Box Filter Gasket Studs (4 required) Pins (4required) Bottom Carb. Gasket A40522 Assembly
HI-HEAT COATING
For Cont. 0-200 engine as used on Cessna 150. Also fits Cessna 120, 140, and PA-22 Tripacer. Order filter, gaskets, studs & pins separately. Not FAA/PMA Approved. P/N 641534 ............$173.95 Cable B Nut ............P/N 05-16245 .............$7.95 Heat Box for Cessna 170 - Similar to P/N 641534 above, but larger P/N 08-01625 .........$227.95 Similar to Cessna 170 box. Fits Lyc. 0-360, 0-470, etc. Uses brackett BA-5110 filter...............................................P/N 08-01630 .........$268.95
Lycoming O-320 and Continental A65-100 Carb Heat Boxes. The 100-320 is 2-1/2 diameter height is 1 smaller flange. Lycoming O-320 Carb Heat Box w/Tube ......... P/N 05-01388 ....$224.95 Lycoming O-320 Carb Heat Box w/o Tube ...... P/N 05-06841 ....$219.95 Lycoming A65-100 Carb Heat Box w/Tube ..... P/N 05-01387 ....$246.95 Lycoming A65-100 Carb Heat Box w/o Tube .. P/N 05-06840 ....$224.00
Designed for airplanes and rotorwing aircraft with engines in pusher configuration using MA3/MA4 carburetors (not MA4-5). Uses same baskets as J-3 & C-150 boxes........................... P/N 08-00855 ............... $208.50
This box is an improved redesign of the original heat box. It eliminates the possibility of engine stoppage caused by worn parts plugging the carburetor intake. Without Filter ......................... P/N 08-01600 .......$194.50 VE/LE Heat Box Repair Kit ... P/N 08-01610 .........$17.75 VE/LE Filter Only ................... P/N 08-01615 .........$29.90 VE/LE Filter Cleaner Kit (cleaner & oil) P/N 08-01620 .........$11.75 Heat damaged O-470 & O-520 engine mounts are a definite problem area. You can easily protect these engine mounts from further damage with these heat shields The aircraft manufacturers overlook providing heat protection in these areas when they designed and produced the aircraft. INSPECT ENGINE MOUNTS. Flaking paint, deterioration or pitting leads to cracking, and breakage in other words, an UNSAFE CONDITION. If you want long-lasting protection from corrosion damage, the solution is install custom engine mount heat shields that are FAA & STC/PMA approved. Avoid downtime and save money on airplane maintenance with this practical new device. The heat shields are built from an extremely durable 6061-T6 aluminum alloy and install in minutes. The complete kit includes installation hardware, instructions & copy of the Supplemental Type Certificate. For Cessnas: Heat shield kit for 180, 180A-H, 180J, 180K, 182, 182A-R P/N 08-01660 .....$169.85 Heat shield kit 185A-E,A185F. Fits Standard and 3 bladed mounts. ......................................................................... P/N 08-00767 .....$206.95 Replace. Intake Shields (heavy duty) PMAd .. P/N 08-00769 .......$29.25
These high quality carburetor heat boxes are available for most common Lycoming & Continental engines. Not FAA approved. (Shown here with tube) K1F Heat Box w/o tube ..........P/N 08-01601 .....$156.95 K1M Heat Box with tube.........P/N 08-01602 .....$166.95 KO320 Heat Box with tube .....P/N 08-01603 .....$168.95 KO360 Heat Box with tube .....P/N 08-01604 .....$156.95
This carburetor intake box bracket mounts on top of the heat box and attaches to the engine to provide support for the heat box. Fits Cessna 150. P/N 08-01305 ...................$43.85 Prevent carburetor heat box cracking - a common problem on Cessna 150 aircraft and Cont. O-200 engine. Kit consists of actuating shaft, 2 bearing assemblies and arm. Kit no. FG100 fits Cont. 0-200-A, B, C Engines. Kit No. FG105 fits Cont. 0-300-A, B, C, D, E engines. Model FG100.......................... Kit No. 08-01309 ......................... $64.75 ModelFG105 ........................... Kit No. 08-01310 ......................... $62.25
These kits include new shaft & bearings. Kit for Cont. C-85, C-90, 0-200 Engine P/N 07-00110 ...... $42.75 Kit for Cont. C-145, 0-300 Engine P/N 07-00120 ...... $43.50 Requires FAA form 337 for installation on certified aircraft
Use this kit to repair an elongated hole in the carburetor heat box actuating arm. Kit comes complete with new bolt and attaching hardware made of stainless steel. P/N 07-00130 .......$13.75
CARB HEAT BOX ARM HOLE REPAIR KIT CARBURETOR INDUCTION MANIFOLD (INTAKE SPIDER)
For O-200 engine ................ P/N 35145A-1 ........ $385.95 For A-65,C-75,C-85 & C-90 engines. P/N 35145 .............. $298.50
355
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Engine Application Cont., O-470 Cont. A-65, C-75 thru C-90, O-200, O-300 Lycoming
This high quality exhast/engine studs produced from corrosion resistant 321 stainless steel in 5/16" X 18"-5/16" X 24" standard thread size are a direct replacement for the TCM Continental part number 402-151 stud. FAA/PMA approved for the Continental engines C-75, C-85, C-90, O-200 series engines, and o-300 (early) series engines. P/N 08-07282 .......................... $9.85
The original Exhaust Insulating Wrap was developed over 14 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec -- Thermal Conduction Technology (TCT) -- that conducts heat across the wraps surface. This coating controls heat build-up and dissipation. The Header Wrap is sold in 2 wide, 50rolls with a low profile 1/6 thickness. P/N 09-41600 ........................... $47.75 Now you can get everything you need for a complete, professional installation of our Exhaust Insulating Wrap, all in one package.Kits include Exhaust Insulating Wrap, Hi-Heat Coating and Snap Strap; available in Black and Original. 2 Original, 1 Roll .............................P/N 08-07204 .......................$56.75 2 Original, 2 Rolls ...........................P/N 08-07205 .....................$114.95 2 Black, 1 Roll ................................P/N 08-07206 .......................$61.75 2 Black, 2 Rolls...............................P/N 08-07207 .....................$129.95 Flexible clamp on pipe heat shield blocks over 95% of the damaging radiant heat of the exhaust.Provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs. Installs in minutes. Incorporate Thermo-Tecs proprietary coating technology developed by ThermoTec, Thermal Conduction Technology. 6X 1 ........................P/N 08-07073 ...........$23.50 6 X 2 .......................P/N 08-07074 ...........$34.90 The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap -- and more. The high-temperature stainless steel straps have a narrow profile to fit tight spots, and can be cut to the exact length needed. Snap Straps secure with easy-to-use slide-through fasteners. . 9 12 pack ..........P/N 08-13150 ............$25.75 18 6 pack ...........P/N 08-13160 ............$17.75
Produced from corrosion resistant 321 in 5/16 x 18 standard thread size and are a direct replacement for the Lycoming part number 31C12 stud. Stop stud corrosion and rust out problems, stop expensive cylinder repair costs cause by broken studs, allow easy removal of exhaust systems for gasket replacement or inspection, but does not feature a safety wire hole (refer to p/n 08-06780 for safety wire hole feature). FAA approved for all Lycoming engines from 0-235 through 0-540. ... P/N 08-06279...... $3.95 With safety wire hole feature ............................. P/N 08-06780.... $11.50 Stud for Continental Engines O-470, IO-470 ( 1/4x20-1/4x28) P/N 08-07281...... $9.50 These gaskets are manufactured in a 1-piece design in 7/64 thick steel. They have a split metal inner ring which provides an absolute seal and they are guaranteed not to blow off. Engine manufacturers parts. Continental P/N 627429 for all A, C and E Series ..................$10.75 Ea Continental ..................................... P/N 628260 for 0-470-R ...$9.90 Ea Lycoming P/N 77611 for 4 & 6 Cylinder Engines..................... $7.70 Ea
SNAP STRAPS
Continental P/N 21493 (now P/N 632837 stainless steel) Cont.#21493 for A-65 to 0-300 (4) ..............P/N 08-05237 ...... $1.25 Ea Cont. #632837 Stainless Steel ................................................. $2.40 Ea Lycoming 0-320 except h series .................P/N 77611 ............$7.70 Ea
Keep heat where you want it with this hi-tech aluminized heat blanket. Thickness, 0.060. Furnished in 36x40. Sheets (10 Sq. Ft.) P/N 08-06735 ...............$78.85 ea. * Can be used for various uses* Can be used as a header blanket* Improve driver comfort* Protect engines components* Continuous heat up to 1100 degrees F* Reflects 90% of radiant heat up to 3000 degrees F. * Size: 26" x 40" Sheet P/N 08-07162 ....................$103.95
ALUMINIZED HEAT BARRIER STOPS UNWANTED HEAT TRANSFER KEVLAR HEAT SHIELD
2 gaskets used per cylinder, with raised beads interlocked facing the exhaust stack flange. Eight required for 4 cyl. engine, 12 for 6 cyl. engine.
Side view Cross Section
Engine Model Number All Lycoming Engines except IO-540-B,-E,-M,-WD,IGO-540-B,IGSO540-B,TIO-540 series,TIO-541 series TIGO-541 series, IO-540-B,-E,M,-WD,IGO-540-B,IGSO-540-B TIO-540 Series, TIO-541 Series, TIGO-541 Series A-65 Series, C-85 Series, C-90 Series, )-200 Series,O-300 Series, GO-300 Series, E-185 Series,E-225 Series, O-470-A, -E, -J, IO-470-J, -K
Airborne Price P/N Each (Use 2/Cyl.) 160 161 157 $14.25 $13.30 $8.75
Handles continuous temperatures up to 1100deg F. Reduces radiant heat inside vehicle. Dampens muffler noise and vibration. Includes stainless steel straps for installation. Neat attractive appearance and is abrasion resistant. P/N 08-07201..............$124.50
Genuine Rotax replacement spring for use with Rotax exhaust systems 277/377/447/503,618,912 UL,912 ULS. 66mm (2.60) hook distance. Part #938-795 Spring 2-1/4 with a 5/8 diameter. P/N 08-06101 .................$3.28
Express Sleeves are just the thing that our customers have been looking for. An new easy to use sleeving which is a combination of a high temperature insulation material to a highly reflective mylar foil with a Velcro closure. The sleeving is designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap around the wire, and reclose the sleeving. Express Sleeves reflect over 90% of radiant heat, is fireproof and fire resistant, and just looks good. Express Sleeves come in 1 1/2 diameter in 3, & 12 lengths. Size 1-1/2 X 3 1-1/2 X 12 Part No. Price Size 09-02060 $26.85 1/2 x 3 09-02061 $103.95 1/2 x 12 Part No. 08-07202 08-07203 Price $24.50 $93.50
EXPRESS SLEEVES
STAINLESS STEEL
Continental A & C Series ...............P/N 33101 .... $12.75 Continental IO-470 thru IO-520......P/N 33103 .... $13.75 Lycoming 0-235 thru IO-360 .............................P/N 33102 .... $12.95 Lycoming IO-540 ...............................................P/N 33104 .... $12.75 Ea Ea Ea Ea
Thermo-Guard FR offers the best in head and sound insulation. This lightweight, durable shield does everything: reduces sound, absorbs vibration, protects from radiant heat and provides an extra layer of insulating padding. The product features 100% synthetic fiber felt that provides sound and comfort control and high-tech foil heat barrier that blocks more than 90% of radiant heat. 48x72 1-Sided ........P/N 08-01028 ..........$41.50 48x72 2-Sided ........P/N 08-01029 ...........$59.75
THERMO-GUARD FR
356
Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings. Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a duel-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. P/N 08-00610 .......................... $35.25 Lamination of a high-temperature fabric to a highlyreflective foil is the makeup of Thermo-Sleeve, which provides protection from radiant heat for hoses and wires. Thermo-Sleeves ultra light-weight construction provides more insulating than traditional bulky rubber-coated fiberglass. The aluminized sleeving reflects over 90% of radiant heat, and is fireproof & oil resistant. Comes packaged in 12-ft lengths, and sold in 5 different inside diameter sizes. 12 1/2 ID .......P/N 08-00605 .. $48.75 12 1 ID ...P/N 08-00606 .$66.75 12 1-1/2 ID....P/N 08-00607 .. $79.95 12 2 ID ...P/N 08-00608 .$95.95 12 2-1/2 ID ..P/N 08-00609 $112.95 Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000F. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance. Note: Clean surface before applying. Adhesive is rated up to 300 F. Dont apply to any parts of exhaust system. This product is designed to block radiant heat only! 12 x 12 ...P/N 08-00630 ... $11.50 12 x 24 ....P/N 08-00600 .. $19.75 The Header Manifold Blanket provides excellent heatretention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away, offering protection from abrasion and harmful liquid spills. Available in two sizes: (2) 20 by 24 blankets for V6 & V8 applications, and (1) 36 x 40 blanket for straight 6 & 4 cylinder engines. 20x24 ....P/N 08-00603 ..... $85.75 36x40 .... P/N 08-00604 ..$84.75 This unique spark plug & ignition wire protector comes in five sporty colors; red, orange, blue, black & natural.These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install & non-flammable. 4-Pack .....P/N 08-01027 .....$26.75 6-Pack ..... P/N 08-01030 . $39.95 Graphite Black Wrap offers the same unrivaled performance and insulating properties as our original exhaust wrap and more. Traditionally, high-heat coating spray had to be applied to the exhaust wrap to color it black. Now new Graphite Black Wrap eliminates the process of coating the wrap with its patented Thermal Conduction Technology (TCT) high-heat color pigment. Graphite Black Wrap is available in 2 widths, in 50-ft rolls. P/N 08-00596 ........................... $49.75 Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by ThermoTec; improved Thermal-Conduction-Technology (T-C-T). Creates more horsepower & reduces underhood temps, increases exhaust scavenging, withstands continuous heat up to 2000F, contains no asbestos. Sold in 1 or 2 wide, 50 ft rolls with low profile 1/16 thickness. 1X50 ................P/N 08-11031 .......... $28.85 2X50 ................P/N 08-11032 ......... $50.00 Lightweight yet durable, the aluminum Micro Louver Air Shield features micro air louvers, which allow air to flow through the metal shield. The movement of the vehicle creates dynamic air flow, cooling by natural convection. The textured surface created by the micro air louvers creates more area for heat dissipation. The Micro Louver Air Shield is flexible yet durable; it bends and flexes easily by hand, making a custom fit trouble-free. 12X24.............P/N 08-11710 .......... $31.25 24X24.............P/N 08-11720 .......... $51.00 48X24.............P/N 08-11740 .......... $88.50
COOL-IT MAT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
THERMOSLEEVE
The ultimate protection for spark plug wires and boots from conductive and radiant heat. The dual-purpose sleeve has a surface that reflects over 90% of radiant heat, while the inside silica-based fabric prevents conductive heat from penetrating. P/N 08-00612 ..$17.50
Designed to protect, improve performance, and eliminate turbo lag of a turbo charger. Fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications. 4 cyl. kit ........... P/N 08-00613 ....$96.75 68 cyl. kit ....... P/N 08-00614 ..$118.95 The 40x 24 mylar Heat Shield is made up of woven silica with a flexible mylar finish. Can be installed between the catalytic converter, muffler, or any other component to reflect radiant heat away from the undercarriage of the car. The kit includes all necessary fasteners. P/N 08-00616 .............$58.80 Made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temperature silica felt center and a durable mylar composite facing. Uses Thermal Conduction Technology (TCT), developed by Thermo-Tec. 8x 12 ......P/N 08-00617 ....$58.75 10x 18 ....P/N 08-00618 ... $84.50 18x 18 ....P/N 08-00619 ..$101.95 18x 24 ....P/N 08-00620 . $107.95 24x 24 ....P/N 08-00621 ..$115.95 24x 36 ....P/N 08-00622 . $122.95 Starters take in a lot of damaging heat that destroys the windings of the starter & solenoid. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters. P/N 08-00611 ................... $27.75 Thermo-Shield protects hoses & wires from radiant heat. Used in applications where it is difficult or not practical to disconnect one end of the hose or wire. The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance. 15x 1.5 roll. P/N 08-00602 ................... $16.95 Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses and wiring. The combination of aluminum, silica, and stainless steel is combined to produce a sleeving that is flexible, lightweight, and strong. The aluminumsilica combination can be slit for applications such as wire looms or hose covering without disconnecting the ends of the wire or hoses. ThermoFlex Aluminum can withstand extreme temperatures of up to 750F. Packaged in 10 ft. lengths. 5/8 ........P/N 08-00623 ......$44.75 1.25 ..... P/N 08-00626 ......$64.75 0.75 ......P/N 08-00624 ......$47.25 1.5 ....... P/N 08-00627 ......$73.50 1 ...........P/N 08-00625 ......$58.75 3 .......... P/N 08-00628 ....$117.95 The Fireproof Shifter Boot is made up of woven silica with a flexible Mylar finish. The shifter boot was developed as a fire barrier for high speed engine fires, which can burn away rubber boots in seconds. P/N 08-00615 ............................$28.75
TURBO KIT
THERMO SHIELD
THERMOFLEX
357
Power Flow Systems, Inc., the world leader in designing, manufacturing, and retailing of FAA Certified High Performance aircraft tuned exhaust systems. Their Tuned Exhaust System is totally different. When you break down their exhaust system, you have two sets of pipes; the primary (header/collector combination) and the secondary (pipe after the collector). The primary contains four independent tubes that all join at the 4-1 Collector. As each exhaust puff of spent fuel travels through the primaries, it leaves a vacuum behind. In their tuned exhaust system, they have adjusted the length of each tube so that the vacuum reaches the collector just in time to suck out the exhaust from the next cylinder. The exhaust gases are not only being pushed out by the cylinder, but extracted by the vacuum, so a bigger, fresher charge will enter the cylinder during the next cycle. A tuned exhaust system really promotes a smoother, cooler, and finally more powerful running engine. Benefits with Power Flow Systems: Kit Contents: Shorter Take Off Roll Kit includes everything to bolt on a Greatly Improves Rates of Climb Complete Replacement Exhaust System More Usable Power New Headers, Heater, & Muffler Fuel Savings at Current Speeds No blow gaskets, Nuts, Lock washers, Smoother Running Engine Flat washers, Cotter pins etc. Runs cooler at Current Speeds Stainless Steel Construction Go up to 8 knots faster Up to 40% thicker than stock Mandrel Bent Tubes to maintain New Improved Heating System consistant interior dimension
Price $5,500.00 $200.00 $3,726.00 $3,925.00 $4,250.00 $4,225.00 $3,925.00 $4,125.00 $4,225.00 $4,425.00 $3,725.00 $3,925.00 $4,025.00 $4,225.00 $3,925.00 $4,125.00 $4,225.00 $4,425.00 $3,925.00 $4,125.00 $4,225.00 $4,425.00 $5,190.00 $5,400.00 $5,600.00 $3,690.00 $3,890.00 $3,990.00 $4,190.00 $3,990.00 $4,190.00 $4,290.00 $4,490.00 $3,990.00 $4,190.00 $4,290.00 $4,490.00 Short Stack Ceramic Mooney M20 Polished (B,C,D,G) w/ O-360 Ceramic Mooney M20 Polished (E,F,J) w/ IO-360 Ceramic Diamond DA 40 Polished Ceramic Raytheon Polished Beechcraft 23 (O-360) Ceramic Polished Piper PA-28150, 160 w/ Conical Mounts (Below Serial #1761) Classic Polished Piper PA-28150, 160 w/ Dynafocal Short Stack PolMounts ished (Below Serial #1761) Short Stack Ceramic Classic Polished Classic Ceramic Classic Ceramic Short Stack Polished Airplane Glastar & Sportsman 2+2 Experimental/ Homebuil Type of System Polished Ceramic Classic Polished Clssic Ceramic Piper PA-28- Short Stack Polished 140 Short Stack Ceramic Power Flow P/N PFS-16104 PFS-16104-Ceramic PFS-14150 PFS-14150-Ceramic PFS-14150-InternalC PFS-14150 - InternalCCER PFS-14150 PFS-14150-InternalInternalP PFS-14150-InternalPCER PFS-14151 PFS-14150-Ceramic PFS-14151-Ceramic PFS-14151-InternalP Our P/N Price 08-04986 $2,695.00 08-05981 $2,895.00 08-05924 $3,775.00 08-05982 $3,975.00 08-05983 $4,075.00 08-05984 $4,275.00
08-05985 $3,775.00
08-05987 $4,075.00 08-05988 $4,275.00 08-04985 $3,775.00 08-05986 $3,975.00 08-05989 $3,975.00 08-05990 $4,075.00
Short Stack Ceramic PFS14151-InternalPCER 08-05991 $3,975.00 Classic Polished Piper PA-28180 Short Stack Pol(Below Serial ished #1761) Clssic Ceramic PFS-14150 PFS-14150-Ceramic PFS-14150-InternalP PFS-14150-InternalPCER PFS-16101 PFS-16101-Ceramic PFS-16201 PFS-16201-Ceramic PFS-15102 PFS14152-Ceramic PFS-14152 PFS-13804-Ceramic PFS-113804 08-05992 $3,775.00 08-05993 $3,975.00 08-05994 $4,075.00 08-05995 $4,275.00 08-00694 $4,190.00 08-05996 $4,390.00 08-01219 $4,590.00 08-05997 $4,790.00 08-05949 $4,990.00 08-05998 $4,490.00 08-05950 $4,290.00 08-06000 $4,490.00 08-05999 $4,290.00
Grumman AA-5 (below serial #640) Grumman AA-5 (above Serial #640) & Grumman AA-5A Grumman AA-5B & AA-5B
358
EXHAUST SYSTEMS
All exhaust stacks are heli-arc welded using Type 321 stainless steel tubing for light weight and long service life. Stainless steel stacks weight 50% less than a set in mild steel. All stacks are custom made and the workmanship is consistently of exceptional quality.
WHEN ORDERING, SPECIFY COMPLETE MODEL NUMBER AND HP OF ENGINE AND AIRCRAFT TYPE.
Basic exhaust pipes for Pitts Special, Smith Miniplane, Acro Sport, Starduster and many other homebuilts with Lycoming engines O-235 through O-360. This exhaust system fits under the intake tubes, starting at the rear cylinders, around the front intake tube, then points aft. Two mufflers (P/N 33205) or two tail pipes (P/N 33204) can be used with this system. With stainless swivel joints for vibration dampening and for positioning of tail pipes through 25 range. Wt. 7-1/4 lbs. SYSTEM FOR LYCOMING ENGINES THRU 180 HP Set of two basic stacks only, consisting of: Right Hand, P/N 33202 & Left Hand, P/N 33203 Set of Two .......................... P/N 33202/33203 ......................$779.00 (Tail Pipes not included.) System for Lyc. O-320B (Fuel-Injected) Tightest system for this engine. P/N 33270-1 ............................. $845.00 (Tail Pipes not included.)
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A exhaust system allows your engine to breathe properly by reducing back pressure and by picking up the correct firing order of the cylinders. This results in increased HP compared to an untuned exhaust. The added HP will be evident as higher takeoff RPM, higher cruise speed and lower fuel consumption. This crossover system fits all Lycoming engines from O-235 to IO-360 (180 HP) with bottom or aft mounted carburetors or fuel injection controllers. It is designed for tight cowling and in most cases no cowling modification will be necessary. If fit is the problem, custome tighter crossover systems are available by special order (Additional charges may apply). The system has slip joints between cylinders and ball joints where tail pipes or mufflers connect to collector tubes to prevent cracking due to expansion and vibration and to allow for positioning of the tail pipes. The exhaust system can be ordered in the following combinations: 1. With straight tail pipes 2. With two mufflers (no heat exchangers) 3. With two mufflers (one heat exchanger) 4. With two mufflers, both with heat exchangers. All mufflers include removable 8 tail pipes. Heat shrouds have one inlet and one outlet for 2 or 2-1/2 flex tubing Compression Springs - used on Exhaust System Ball Joints. 6 required per system. P/N 33703 ............................... $5.75
2 Dia. Inlet & Outlet .................P/N 33206-1 ................$365.00 Ea. 2-1/2 Dia. Inlet & Outlet ...........P/N 33206-2 ................$382.95 Ea. When ordering muffler with heat exchanger, advise if inlet & outlet pipe diameter other than 2 or 2-1/2 is preferred. When ordering muffler with heat exchanger, advise diameter of inlet and outlet pipe preferred (2, 2-1/2 or other).
Designed to fit Lycoming engines 0-235 to 0-360. Mild steel. These stacks do not fit Pitts Special. Applicable to many home builts. Wt. 7.25 lbs. P/N 08-01900.............. $629.00
NOTE: PRODUCTS ON THIS PAGE ARE FOR EXPERIMENTAL AIRCRAFT AND ARE NOT FAA APPROVED. ALL EXHAUST SYSTEMS ARE SPECIAL ORDER AND ARE NON RETURNABLE
359
EXHAUST SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This custom stainless exhaust system was designed specifically for the Cozy Mark IV aircraft. For Lycoming O-235 to O-360 (180 HP or less) P/N 33702 .................$875.00 For Lycoming IO-360 (200 HP) Angle Valve Engine P/N 33702-1..............$895.00 Replacement Cozy Extension Spring P/N 33704 ................$7.75 ea Cozy Inside Cowl Exhaust ....................... P/N 08-07342............$995.00 This stainless steel exhaust system is specifically designed for the Osprey Aircraft. Ideal for amphibians as the tailpipe exits vertically upward. Fits aircraft using the following engines: O-235 thru O-360. RH & LH Stacks Only P/N 33420 ......$625.00 ADD OPTIONS: Muffler Only ............. P/N 33422 ......$195.00 Muffler with Heat Exchanger ................................P/N 33424 ... $345.00
Fabricate your own exhaust system with these precision-formed type 321 stainless steel components.
This universal stainless steel exhaust system is designed for experimental aircraft using Continental A65 thru O-200 engines. Consists of 2 manifolds, left hand manifold has heat shroud with 2-1/2 connection for carb heat. Muffler outlet are 3 long. Tailpipe extensions may be required, sold separately Mufflers ...........P/N 33401 ............. $898.00 8 Tailpipe Extensions. Furnished with slip joint and pin clamp. P/N 33402 ............. $115.00 THIS SYSTEM IS PATTERNED AFTER A CESSNA 150 SYSTEM, BUT WILL NOT FIT A CESSNA 150 OR 152.
Price $41.75 $46.50 $39.75 $49.75 $41.75 $40.65 $42.85 $42.57 $51.75 $39.50 $52.50 $52.00 $46.75 $65.02 $67.80 $59.90 $85.00 $77.85 $69.50
Fits Lycoming IO-540 (Angle Valve Engine) (Includes Custom 2-1/4 Tailpipes With Cabin heat shroud) (Optional studding to increase cabin heat available) P/N 08-02105 ...................... $1,496.00
WHEN ORDERING EXHAUST SYSTEMS, PLEASE SPECIFY COMPLETE MODEL NUMBER & HP OF ENGINE AND AIRCRAFT TYPE
Designed specifically for tightly cowled engines. Exhaust fits inside of intake tubes. Applicable to: For Continental C-85 thru O-200 P/N 33601 .............. $695.00 For Lycoming O-235 thru O-360 ................ P/N 33602 ...............$695.00
Stainless tubing 6L welded onto stainless exhaust flange. 1-1/2x .035 for Continental (doesnt fit 0-240) P/N 13352 ................$66.50 1-3/4x .035 for Lyc. .............P/N 13354 ................$53.50
Stainless type 321 welded tubing for exhaust stacks. Tubing Size Price P/N (O.D. x Wall) per Ft. 1-1/2 x .035 03-16300 $21.25 Tubing Size Price P/N (O.D. x Wall) per Ft. 1-3/4 x .035 03-16400 $22.93 2 x .035 03-16500 $24.85
NOTE: PRODUCTS ON THIS PAGE ARE FOR EXPERIMENTAL AIRCRAFT AND ARE NOT FAA APPROVED. ALL EXHAUST SYSTEMS ARE SPECIAL ORDER AND ARE NON RETURNABLE
360
EXHAUST SYSTEMS
Long-EZ exhaust system fits all Lycoming 4 cylinder engines. P/N 08-00832 ........ $775.00
Lancair legacy exhaust system, left & right hand maniflolds with tailpipes and cabin heat shroud. Fits IO-550 Continental. Exh. Sys. 33805-1 ..P/N 08-00838 ..... $1,675.00 Exh. Sys. 470-550 ..P/N 08-02103 ..... $1,675.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
With this configuration the exhaust tips are located where the cooling air exits. This design eliminates cutting the cowling for exhaust exit and improves propeller efficiency by moving the exhaust pulses inboard, closer to the center of the prop hub. Fits Lycoming O-320 & O-360 parallel valve engines. P/N 08-00833 ............. $938.00
Fits Lyc. O-320 to O-360 with vertical induction. P/N 08-00839 ..... $1,624.00 Fits Lyc. engines w/ horizontal induction up to 180HP P/N 08-00840 ..... $1,495.00
Includes exhaust system with (1) heater muffler, (1) non-heater muffler and tailpipes. Fits Lycoming O-235 and O-360 with vertical induction. P/N 08-00842 ......... $1,345.00
Velocity exhaust system fits 6 cylinder Lycoming parallel valve and angle valve engines. Parallel ..........P/N 08-00836 ........ $773.00 Angled ...........P/N 08-00837 ........ $773.00
Mustang II Crossover Exhaust System Lycoming O-235 through O-360 (Comes with Custom Tailpipes) (Vertical Induction Intake) P/N 08-07337 ......................$1,192.00
PN 08-02100-Fits Lycoming O-320 (Vertical Induction Intake) (Must use short miniature light weight Sky Tec starter for clearance) (Optional studding to increase cabin heat available) PN 08-02102-Fits Lycoming O-360 (Vertical Induction Intake) (Must use short miniature light weight Sky Tec starter for clearance) (Optional studding to increase cabin heat available) P/N 08-02100 ...........$1,675.00 P/N 08-02102 ...........$1,675.00
Crossover exhaust system Continental IO-240 (Tailpipe Not included) P/N 08-07338 .........................$825.00
Aero-Cad 4-Pipe Exhaust Manifolds Lycoming 0-235 through IO-360 200 HP P/N 08-07343 .........................$852.00
Manufactured from aircraft quality 321 stainless steel tubing. Set of two stacks or purchase each side individually. Patterned after Aeronca style exhaust. Fits Continental C90 Thru 0-200. Not FAA approved. Wt. 3-1/4 lbs. Set of two P/N 08-02001 ......................................$636.00 Right side P/N 08-02101 ......................................$318.95 Left side P/N 08-02201 ......................................$318.95
Crossover Exhaust System Lycoming IO-360 200 HP & IO-390 210 HP Angle valve engine. NOTE: Photo shows optional tailpipes,P/N 33204-18 (08-00827) tailpipes are not included, but can be purchased seperately. 4 Cyl. Lyc. Croosover Exhaust 200HP.........P/N 08-07341 .......$975.00 18 Tailpipes 33204-18.................................P/N 08-00827 .......$213.95
361
EXHAUST SYSTEMS
VETTERMAN RV EXHAUST SYSTEM
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Vetterman Exhaust has been manufacturing exhaust systems for the Vans Aircraft RV series since 1990. Exhaust systems for all RV models & Vans approved engine models are available. All systems are manufactured from MIL Spec 321 stainless steel, which is mandrel bent, trimmed to length and tack welded on a Lycoming engine. This method assures the best fit possible. All systems incororate ample slip & ball joints which greatly reduces breaking potential. All systems include blow proof gaskets, stainless exhaust nuts & washers for installation. Also include tail pipe mounting kits or pipe support brackets. Some systems also include a cabin heat muff.
AIRCRAFT RV-3 RV-3 RV-3 RV-4 RV-4 RV-4 RV-4 RV-4 7-7A,8-8A, RV-6,7,8,9A RV 7-7A RV8 RV 8A
DESCRIPTION O-320 Conical Mount 4 pipe sys. O-320 Dynofocal Mnt. 4 pipe sys. O-360 Dynofocal Mnt. 4 pipe sys. O-320 Conical Mount 4 pipe sys. O-320 Dynofocal Mnt. 4 pipe sys. O-360 Dynofocal Mnt. 4 pipe sys. O-320 Dynofocal Mnt. X-over sys. O-360 Dynofocal Mnt. X-over sys. *Includes tail pipe mounting kit *Includes tail pipe mounting kit *Includes tail pipe mounting kit *Includes tail pipe mounting kit *Includes tail pipe mounting kit
P/N 08-00583 08-00584 08-00585 08-00586 08-00587 08-00588 08-00589 08-00590 08-00591 08-00592 08-00593 08-00594 08-00595
PRICE $737.00 $742.00 $732.00 $732.00 $733.00 $733.00 $763.00 $767.00 $946.00 $945.00 $929.00 $842.00 $966.00
NOTE: EACH OF THESE SYSTEMS WILL NOT INTERCHANGE BETWEEN AIRCRAFT AND ENGINE MODELS. THESE SYSTEMS ARE DESIGNED AND INTENDED FOR USE ON RV AIRCRAFT ONLY. PRICES DO NOT INCLUDE SHIPPING CHARGES.
362
CM WP ME HA AP
BEECHCRAFT 33/A33/B33/35
Description / OEM # Heat Muffler RH/#186-30 Muffler RH / #189 Stack Assy RH/#35-950116 Stack Assy LH/#35-950118 Part No. 186-30 189 BES-0001 BES-0002 Price $455.95 $237.95 $445.95 $445.95 Price $234.95 $368.95 $453.95 $472.95 Price $434.95 $376.95 Price $419.95
LG EP CS IN EL AV TO PS BV
CESSNA 152/A152
Aircraft Description/OEM # Part No. Cessna 152 (S/N 735-975) Muffler/#454009-5 CEM0025 & A152 (S/N 978 & up) Muffler/#454009-6 CEM0024 Price $309.00 $319.00 Price $477.95 $477.95 Price $324.95
BEECHCRAFT C33A/36/A36
Aircraft Description / OEM # Part No. C33A,E33A,F33A Muffler LH/#701-20 701-20 C, S35, 36, A36 Heat Muffler RH/#701-19 701-19 C33A, 36, A56 Collector LH / #35-9016-1S 08-00853 C33A, 36, A36 Collector RH / #35-9016-3/5S 08-00854
CESSNA 170/172
Aircraft C170,172, A Cont 0-300/C145 Description / OEM # Muffler LH / #0550157-9 MufflerRH / #0550157-32 Part No. 221-9 221-32 Part No. 568-110
CESSNA 172B-H/175
Aircraft Cessna C172B-H & 175 B-D Cessna R172 Aircraft C172 O-320 C172 O-320 C172 O-320 C172 O-320 Description / OEM # Muffler LH&RH / # Muffler / #1455009-3
CEM0023 $385.95 Part No. W1754007-1 W1754008-1 W1754009-1 W175010-1 Price $169.95 $145.95 $145.95 $158.00
CESSNA 172
Description/OEM # Stack/#1754007-1 Stack/#1754008-1 Stack/#1754009-1 Stack/#1754010-1
PIPER PA-18
Description / OEM # Muffler / #12433-15 Part No. PIM0006-100 Part No. Price $419.95 Price
PIPER PA-28
Aircraft Description / OEM # PA-28-140, -140 Muffler w/o shroud / 150, 160 #99482-00 PA-28-151,161,180,181 Muffler (2 req.)/#66894-03 PA-28R,180, Muffler (2 req.)/#67517-00 200, 201, 236 3 req. for 236 PA32-300,32-760001 Muffler (3 req.) 67517-00 & up, PA32-R300 PIM0001 $359.00 PIM0007 $262.95 PIM0004 $283.00 PIM0004 $283.00 Price $800.00 $800.00
CESSNA 180/182/185
Aircraft Description / OEM # Cessna C180,C182, Muffler/#0750161-28/89 & 185 late model 180B,C,D,E,F Heat Muffler 0750130-44 Heat Muffler 0750130-9 182B,C,D,E,F Heat Muffler 0750130-12 210B s/n58086&up Heat Muffler to M LH/#1250250-5 C210B Muffler RH 1250251-16 C210B Collector LH 1250263-2 C210B Collector RH 1250264-2 Part No. Price CEM0002 $332.95 CEM0001 $310.95 CEM0006 $403.95 CEM0009 $383.00 650-43 650-92 650-25 650-36 $493.95 $309.95 $429.95 $429.95
PIPER34-200 SENECA I
Item Left hand Tailpipe Core Right hand Tailpipe Core OEM No. 78463-10 78-463-18 Part No. 08-05885 08-05886
This clamp is used on the exhaust system. The spot weld on the V Band is failing. The failure could result in the release of high-temperature gasses inside the engine compartment and possibly cause an in flight fire according to the published AD. P/N 05-04866.............................................................$583.50
363
EXHAUST SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO
Part No. REAL are twice as thick as typical gaskets and have been hot oil and dry heat tested at 300F. Only REAL gaskets seal uneven surfaces, eliminate corrosion, and reduce maintenance costs. They may be reused, are installed dry, and maintain screw torque. Indefinite shelf life. Highly recommended by Rutan Aircraft Factory. The material used on this System is 1-3/4 O.D. x .035 wall 321 stainless steel. This system is designed for use with Lycoming engines up to 180 H.P. Bending is performed using an inside mandrel which the tube is drawn over during bending to maintain the inside diameter. Flanges are made from 1/4 Stainless Steel. This heavy material greatly reduces warping and cracking. Tail pipes are fitted with a stainless steel spring-type swivel ball joint. This flexible joint not only allows for easy alignment of the tail pipes through the opening in the bottom cowling; but most important, this joint allows the engine and tail pipes to move independently, and greatly reduces the chance of cracking. One heat muff has been provided on the front cross-tube. This muff is intended for carburetor heat. If an injection system is being used, this muff can be used for cabin heat. An optional cabin heat muff can be ordered when carburetor heat requires the use of the standard heat muff. All hardware is provided to install the system. Stainless steel nuts, bolts, washers, blow-proof exhaust gaskets, two stainless clamps for attaching tail pipes to the firewall or engine mount. Building brackets and positioning mixture and throttle cables is always a hassle. A bracket which simply bolts to the engine case and positions the cables in front of the mixture and throttle arms for easy attachment is available as an option. A U-type clamp attaches cable housing securely in place RV-4 Crossover Exhaust System P/N 08-05785 ......................$825.00 NOTE: THIS SYSTEM WILL NOT FIT LYCOMING, 0-320-H2AD OR H3AD ENGINES The material used on these systems is 1-3/4 O.D. x .035 wall 321 stainless steel tubing. 2 models are available; one for Lycoming engines up to 180 H.P. and the other for the Lycoming IO-360 (200 H.P. engine). Bending is performed using an inside mandrel which the tube is drawn over during bending to maintain the inside diameter. Flanges are made from 1/4 stainless steel. This heavy materialgreatly reduces warping & cracking. Tail pipes are attached to the header with a slip joint. Simply slide the tail pipes onto the header, position the end of the pipe as desired in the bottom opening, and attach with the stainless steel retaining clamp. One heat muff has been provided on the front cross-tube. This muff is intended for carburetor heat. If an injection system is being used, this muff can be used for cabin heat. An optional cabin heat muff can be ordered when carburetor heat requires the use of the standard heat muff. All hardware is provided to install the system. Stainless Steel nuts, bolts, washers, blow-proof gaskets, 2 stainless clamps for attaching tail pipes to the firewall or engine mount. U-type clamp attaches the cable housing securely in place. RV-6/RV-6A Crossover Exhaust Sys. (To 180 H.P.) P/N 08-05790........ $803.00 RV-6/RV-6A Crossover Exhaust Sys.* (To 200 H.P.) P/N 08-05795........ $867.00 Optinoal Cabin Heat Muff ............................ P/N 08-00679.......... $92.50 *Will not work with front mounted injectors The RV-6/RV-6A exhaust systems are recommended for these aircraft only. For other expermentals, the RV-4 system may fit better under cowls as it is built tighter to the engine.
75906
530162
17727
632310
632459 67193
71450
532451
534857
Application
PS BV
Price Ea.
Part No.
Applicaion
Price Ea.
Part No.
Application
O-470;IO,TSIOIO-540-B,E,M; TIORG-534857 0-235; 0-290; O,IO,LIO-320; 470;IO,TSIO-520 RG-71450 540-A; $8.75 O-340;O-360-A,B,C,D; IGO, IGSO-540-B. RG-632310 IO, TIO, TSIO-360. RG-75906 IO-360-B; HO-360-A,B;HIO$8.65 360-B; VO,IVO-360;O-540RG-632459 GTSIO-520; TSIO-520-BE. A-65; C-75, 85, 90, 145, A,B,E,F,G; IO-540-C,D,J,N,R. RG-530162 $7.85 175; O-200; O-300. RG-67193 IO-360-A,C,D; AIO-360-A,B; HO-360-A,C,D; TIO-360-A; LIO-360-C1E6;VO,GO-435; GO-480; IO,VO,TVIO-540; IO-720; TVO-435; E-185; E-225; IO-346; $7.75 RG-532451 O-470-A,E,J; IO-470J,K 4A-235, 6A-335, 6A4-150, 6A4-165, 6A4-200, 6A5-335, 6A5-350.
$7.85
RG-17727
$7.65
364
GASKETS
These homebuilders Lycoming valve cover gaskets replace the original cork gaskets which come standard on Lycoming 0-235, 0-320 and 0-360 engines. These new gaskets are molded from high temperature silicone rubber and do not harden over time so they can be re-used again and again. This hi-tech silicone rubber offers a much lower compression set, so it is superior at maintaining an oil-tight seal for the life of the engine. NOT FAA approved. For experimental aircraft only. P/N 08-01187 .............................. $3.95
These gaskets are for the fuel injected IO series, sometimes referred to as the Angle Valve cylinder Lycoming, as well. these gaskets are molded from the same hightemperature silicone rubber as the O series gaskets above, and do not harden over time, so they can be reused again and again.This hi-tech silicone rubber offers a much lower compression set, so it is superior at maintaining an oil-tight seal for the life of the engine. They are not FAA approved and are not manufactured under a PMA. These are similar to Lycoming part number 67193 used on Angled valve Lycoming engines IO-360, IO-540, IO-720. P/N 08-05882 .............................. $5.85
CM WP ME
High quality, economical stainless and copper beaded gaskets. Extra thick spiral woundstyle available Blow Proof
Use As Replacement For: OEM P/N Airborne P/N Superior P/N 630365 N/A SA630365
HA AP LG EP CS IN EL AV
RA-970
N/A 632837 21493 627429 631544 537379 628260 75118 73720 67196 77611 77611
970
N/A SA 632837
08-05270
$7.85
CONTINENTAL
RA-632837
157
RA-627429
999
A-65, A-75,C-85-12F, C-90-8F,12F, 14F, 08-05237 -16F,E-165,E-185,E-225,O-200-A,B,O-300A,C,D,O-470-A,E,J E-165, E-185, E-225O-200-A, B, O-300-A, C, SA 627429 08-05229 DO-470-A, E, J SA631544 O-470-B, G, K, L, M,P, R, S, U O-470-B, G, K, L, M,P, R, S, U,IO-470-D, U, V, TSIO-470-B TSIO-520-B, C, D GTSIO-520-C, D 08-05244
$1.25
$8.65
RA-631544
158
$1.25
RA-628260
972
SA628260
08-05260
$7.85
RA-75118
160
N/A
LYCOMING
RA-77611
SL77611 SL15619
$1.55
N/A
RA985
3503
R-985-AN-1,-3,-4,-6,-6B,-10,12,-12B,-14B
08-64452
$8.65
TO PS BV
Governor Gasket
Gasket part number 365533 is no longer available from Precision Airmotive. The new gasket, part number 2577258 is available and should be used in place of 365533. P/N 07-01312..............................$0.81
Propeller governor gasket for Lycoming 0-320 A & E Series engines. P/N 72053 ................... $1.69
365
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This FAA approved process utilizing Poly-Fiber Dacron polyester and the unique Poly line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.
Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the Master Eligibility List in the latest revision of Poly-Fiber Procedure Manual No. 1.
POLY-FIBER FABRIC
UNCERTIFIED LIGHT
1.87 oz lightweight fabric recommended for covering ultralight aircraft. This fabric will be unstamped. It is not approved for certified aircraft except on plywood surface. 72 Width P/N 09-02001 ................ $8.40 /Lineal Yd. If youre thinking of building a fabric-covered airplane but are wondering what the covering process is like, this is the perfect answer. You get a practice frame, fabric, tapes, needles, rib lacing cord, thermometer, instructions, and all the coatings you need to work through the Poly-Spray stage. Theres enough of everything to do the entire process twice. Youll see how easy and enjoyable fabric covering really is. P/N 09-06220 ......... $62.50
MEDIUM WEIGHT
3.16 oz standard fabric recommended for normal service on all types of aircaft regardless of speed, wing loading or horsepower. 72 Width P/N 09-01600 .............. $11.95 /Lineal Yd.
HEAVY DUTY
3.5 oz Recommended for severe operating conditions and very high wing loading aircraft where a very tough, durable, low elongation, high tension fabric is required and weight is not critical. Great for agricultural, aerobatic and bush planes. 72 Width P/N 09-01700 .............. $13.30 /Lineal Yd.
POLYESTER PADDING
Non -woven, 45 wide, 3 oz. per yard. Used under fabric on wing leading edge and turtle deck to smooth rough surfaces. P/N 09-01750 ........ $7.20 * Style - L indicates Linear Cut *Style - B indicates Bias Cut. Part No. Style # Roll Width Roll Length 09-02200 Med. 1 25 yds. 09-02400 Med. 1-1/2 25 yds. 09-02450 Med. 2 25 yds. 09-02500 Med. 2 50 yds. 09-02900 Med. 3 25 yds. 09-03300 Med. 4 25 yds. 09-03350 Med. 6 25 yds. 09-02300 Light 1 25 yds. 09-02350 Light 1-1/2 25 yds. 09-02705 Light 2 25 yds. 09-02700 Light 2 50 yds. 09-03100 Light 3 25 yds. 09-03400 Light 4 25 yds. 09-03545 Light 6 25 yds. 09-03565 Bias 2 25 yds. 09-03570 Bias 3 25 yds. 09-03580 Bias 4 25 yds.
The Official Poly-Fiber how-to manual. Its a whole covering course in a book. A spiralbound classroom, as the ads say. 151 pages of clear, non-jargon, step-by-step instruction, the entire Poly-Fiber system, from basic materials to blue ribbon. In plain language & has a sense of humor all its own. Entire PolyFiber catalog of products is included. P/N 09-06000 ............ $9.95 Poly-Fiber Color Card #50 P/N 09-00234 ............FREE
Aircraft Fabric Covering is a must for anyone who wants to cover their own airplane. This 2-hour comprehensive DVD presents every aspect of the Poly-Fiber fabric covering process in detail, and in easy-to-understand language. From preparing the airplane for covering to spraying on the colors, you are guided step by step through the entire process by a professional EAA SportAir fabric instructor. When used in conjunction with the Poly-Fiber manual, Aircraft Fabric Covering removes the mystery surrounding this important process in the construction or restoration of your airplane. Information covered includes: Preparing surfaces Attaching the fabric Tightening the fabric Applying the first coat of Poly-Brush Tying rib-lacing knots Applying finishing tapes Spraying UV-blocking chemical Poly-Spray Applying the color coats. DVD .....................P/N 13-40428 .........................$35.50
Solvent used to remove coatings for repairs, for clean up, and to release cemented seams. NOT used to thin or reduce any products. Qt. .................... P/N 09-40835 ................... $14.30 Gallon............... P/N 09-40845 ................... $41.25
POLY-FIBER MEK
366
POLY-BRUSH
A high-solids aluminum-pigmented, 1 part, air drying resin used after the Poly-Brush preliminary coating to protect fabric from UV and prepare for a smooth finish. Thin 4:1. Poly Spray (Qt.) ....................... P/N 09-04400 .......$25.20 Poly Spray (Gal.) ..................... P/N 09-04500 .......$83.60 Poly Spray (5 Gal.) .................. P/N 09-04600 .....$413.10
POLY-SPRAY
This green primer is fast drying, corrosion inhibiting, and has application and curing qualities down to 35F. It is a heavy duty chemical and solvent resistant amine cured primer. Mixing ratio is 2 parts base, 1 part catalyst. Order in kits. Quart Kit (Yields2 1/2 quarts) Incl. catalyst and reducer....................P/N 09-00352 .......... $74.60 Gallon Kit (Yields 2 1/2 Gallons) Incl. catalyst and reducer....................P/N 09-00353 ........ $298.00 Base: Quart .........P/N 09-05605 ........ $48.35 Gallon .......P/N 09-05610 ...... $165.40 Catalyst: Pint............P/N 09-05615 ........ $18.75 Quart .........P/N 09-05620 ........ $31.80 Reducer E-500 (Reduce 50%) Quart .........P/N 09-01163 ........ $15.75 Gallon .......P/N 09-01108 ........ $37.15
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray and Poly-Tone. Blend #R-65-75 is recommended as the standard reducer in normal weather, 6575F. #RR-8500 is a retarder-reducer with slower drying time. Recommended for temp above 85 & warm humid weather. #65-75 #RR-8500 Qt. ............ P/N 09-04700......$15.20 Qt. ........ P/N 09-04750.... $15.40 Gal. .......... P/N 09-04800......$47.80 Gal........ P/N 09-04850.... $48.25 5 Gal. ....... P/N 09-04900....$230.70 5 Gal. ... P/N 09-04950.. $230.90
POLY-FIBER REDUCERS
This blended solvent improves flow-out and prevents blushing under high temperature or high humidity conditions. Improves gloss. BR-8600 (Qt.) ............... P/N 09-40830........... $14.00 BR-8600 (Gal.) ............. P/N 09-40840........... $49.00
POLY-FIBER RETARDER
This white heavy duty chemical and solvent resistant amine cured primer, the excellent primer from Stits is fast drying and corrosion inhibiting. It can be applied and cured to temperatures down to 35F. Mixing ratio is 2 parts base, 1 part catalyst. Quart Kit (Yields 2 1/2 quarts) Incl. catalyst and reducer ................. P/N 09-00285 ................ $75.00 Gallon Kit (Yields 2 1/2 Gallons) Incl. catalyst and reducer ................. P/N 09-00438 .............. $298.00 Base: Quart ........ P/N 09-05625 ........$48.35 Gallon ....... P/N 09-05630 ...... $165.40 Catalyst: Pint ........... P/N 09-05615 ........ $18.75 Quart ........ P/N 09-05620 ........ $31.80 Reducer E-500 (Reduce 50%) Quart ........ P/N 09-01163 ........ $15.75 Gallon ....... P/N 09-01108 ........ $37.15
Excellent cement for all types of fabrics. Shelf life unopened is 2 years. Pint ............... P/N 09-05110............$14.40 Quart ............ P/N 09-05000............$27.25 Gallon ........... P/N 09-05100............$99.80
POLY-TAK CEMENT
A durable semi-gloss, 1-part, air drying flexible paint available in over 50 popular aircraft colors. Recommended as the standard finish for the Poly-Fiber cover process. Also may be used over suitably primed metal components of fabric covered aircraft. Fabric damage is more easily repaired when Poly-Tone finish is used. All pigments are non-bleeding or fading. Will not oxidize with age. Poly-Tone is always thinned to 4 to 1with Poly Fiber Reducer (65-75 or 8500).
POLY-TONE FINISH
An excellent clear gloss epoxy varnish for interior and exterior use. It provides superior weather durability and excellent chemical and solvent resistance. Can be used over a one component varnish primer if desired. Mixing ratio is 2 parts base, 1 part catalyst. Can be ordered as a kit which includes base, catalyst and reducer, or each component separately. Quart Kit (Yields 2-1/2 quarts) Incl. catalyst and reducer..................... P/N 09-00349 ......... $65.35 Gallon Kit (Yields 2-1/2 Gallons) Incl. catalyst and reducer..................... P/N 09-00350 ....... $217.80 Base: Quart ........P/N 09-05645 ........ $37.60 Gallon .......P/N 09-05650 ..... $127.55 Catalyst: Pint ...........P/N 09-05655 ........ $15.85 Quart ........P/N 09-05660 ........ $26.55 Reducer E-500 (Reduce 50%) Quart ........P/N 09-01163 ........ $15.75 Gallon .......P/N 09-01108 ........ $37.15 A chemical curing accelerator for use in EP-420 Epoxy Primer and EV-400 Epoxy Varnish according to directions on base component listing. Reduces polymerization time, not solvent evaporation. 1/2 Pint .................P/N 09-04650 ............ $9.00
4 Whites: QUART GALLON Insignia White (#105) ............................$24.50 ..................$88.80 Juneau White (#110) ............................$24.85 ..................$77.20 Glacier White (#117) .............................$24.85 ..................$88.75 Daytona White (#120) ...........................$24.85 ..................$89.50 All other colors (Color Card #50) ........................................No Charge
POLY-TONE FINISHES
TO ORDER POLYTONE: Create the part number for the Polytone you require: Color-PQ (for Quart) or Color-PG (for Gallon) Example: 100-PQ is 1 Quart of Color #100
Used for additional UV Protection in ultralight airplanes. 1 fl.oz. blocks 1Quart Polytone 1/2 Pint Blocker (8 fluid oz) .........................P/N 09-02053 .......... $23.75 RJ-1200 Quart .........................P/N 09-05200 .......... $24.50 Gallon........................P/N 09-05300 .......... $80.50
A fine lubrication and preservative oil used to prevent corrosion in internal combustion engines during extended storage. MIL-21260. Quart .....................P/N 09-42450 .......... $24.00 Gallon ....................P/N 09-42455 .......... $89.00
367
Each color group in chart below is listed from light to darker shades. Free Poly-Fiber color chart available on request. Color Card #50.
CLEAR
100................(Aerothane Only)
WHITE
105................Insignia White (Eagle White) 110................Juneau White 117................Glacier White (Federal 17038) 120................Daytona White
BROWN
205................Bermuda Tan 203................Elsinore Brown
BLUE
165................Lakeland Blue 170................Bahama Blue 173................AN Blue (True Blue) (Federal 15102) 318M.............Piper Trainer Blue 177................Eagle Blue 176................Insignia Blue (Federal 15044 Blue)
CREAM
132................Sun Valley Ivory 125................Tucson Cream 131................Diana Cream
YELLOW
242................Ag Cat Yellow 136................Lemon Yellow 139................Federal Yellow 145................Lockhaven Yellow 240................Champion Yellow Titanine Yellow 140................Orange Yellow (Schweizer Yellow) (Thrush Yellow) (Orange Yellow) 143................Cub Yellow 146................J3 OEM Yellow
GREY/SILVER
210................Polar Grey 220M.............Nevada Silver 213A .............Federal 36321 Grey 213................Ag Cat Grey 219................Jasper Grey 222M.............Rancho Silver
BLACK
215................Dakota Black (Eagle Black)
AERO-THANE ADDITIVES Description Size Part No. Urethane Catalyst U-865 1/2 Pint 09-05400 Urethane Catalyst U-865 Quart 09-05500 Urethane Reducer UE-820 Quart 09-05600 Urethane Reducer UE-820 Gallon 09-05700 Urethane Retarder UR-826 Quart 09-05800 Urethane Retarder UR-826 Gallon 09-05900
MILITARY CAMOUFLAGE
TO ORDER AEROTHANE:
Create the part number for the Aerothane you require: Color-AQ(quart) or G (gallon). Add -K (kit) if catalyst is required. Example: 100-A-Q-K is 1 quart of color #100 with catalyst included.
Used to make Aerothane and Enamel match the semi gloss finish of Polytone, or to make either Aerothane, Polytone and Enamel Full Military Flat. Use 1 Pint, to flatten 1 Quart .....................P/N 09-02052 ...........$22.55 Use 1 Qt. & 1 Pint, to flatten 1 Gallon.........P/N 09-02051 ...........$43.15
212................Oak Green 208................Federal 14087 142A .............Eagle Yellow (Olive Drab) (Orange) 208A .............Federal 24064 182................Pumpkin Orange Green 183................International Orange GREEN 180................Cruiser Orange 157................Cuby Sport Trainer RED (Green) 189................Madrid Red 151................Everglades Green 187................Eagle Red 156................Portland Green 191................Pontiac Red 160................Forest Green (Toreador Red) GOLD 190................Tennessee Red 301M.............Reno Gold (Federal 11136) TO ORDER (Insignia Red) 195................Santa Fe Red POLY-FIBER COLORS: (Maroon) Simply specify Poly-Fiber 196................Boston Maroon color number from chart 197................Stinson Maroon above, either PolyTone or AeroThane, and quart or gallon.
ORANGE
Thermometer is accurate from 100F to 400F / 50C to 200C. Easy-to-read dial. Adjustable pan clip. Durable stainless steel. P/N 09-37475 ..................$14.40
CALIBRATION THERMOMETER
The Black Baron Iron was designed specifically for use on small aircraft. The exclusive roll bars fit into fillets and undercambers. The flat sole is for sheeted and open structures, and its beveled edges provide constant heat without marks. The toe is rounded and flat best performance. The coating is 100% blackstone making the iron slide like butter, even on tacky surfaces with almost no adhesive buildup. An advanced hi-tech thermostat reduces temperature drift to only 5 Ordinary irons can vary up to 40, causing surface bubbles. Get the best get Black Baron. 110V .................P/N 09-37411 .......... $23.85
With a classic design and a wide range of convenient features, The Classic iron brings simplicity and style back to ironing. A SmarTemp indicator light ensures youre ironing at the right temperature, while the 3-way auto shutoff provides added security and peace of mind. Wrinkle-Fighting Power. Aluminum Soleplate. Steam On/Off Button. Ironing Made Easy. 3-Way Auto Shutoff. Anti Drip. Fabric Guide. Button Groove. Pivoting Cord P/N 09-00980 ......$34.50 Includes large iron and standard small iron, a glass thermometer and silicone heat sink compound. P/N 09-37420 .......... $95.00
IRON KIT
This Teflon coated sealing works on a variety of coverings and has adjustable heat setting. Its an AC unit which operates at 170 watts. The temperature range is approximately 100-350F. Has a 1-year warranty. 110V .................P/N 09-37400 ...........$27.75 220V .................P/N 09-37401 ...........$48.85
For more accurate thermal transfer during iron calibration. 1 oz. Syringe P/N 09-37450 .......... $15.80
368
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This kit includes the items most commonly needed to complete your PolyFiber covering project. Kit Includes: 4 - 1 Disposable Brushes, 3 - 2 Disposable Brushes, 4 - 2 opening 6 long Spring Clamps, 1 - CB-9 Pinking Shears, 10 - 1/2 Glue/Acid Brushes, 1 - Black & Decker Classic Iron, 1 Hobbico Fabric iron 110V, 1 - Silicone heat sink compound, 1 - Thermometer, 1 - 12 Straight Needle, 1 - 12 Curved Tip Needle, 1 - 6 Curved Needle, 2 - Gallon Paint Saver Lids, 1 - V-plore 330 series mask only, 1 - X-plore P100 Combo cart pkg. P/N 09-06230 .............$170.95
Mixing liquid is a combination of catalyst and thinner to be used only with Mark II for Metal paint. Included in Mark II kits above, but also available separately. See directions for mixing, thinning, and application above. Shelf life is two years in unopened package. Quart .............P/N 09-03695 .......... $45.15 Gallon............P/N 09-03696 ........ $149.50 Used to thin Mark II for Metal paint after it has been combined with Mark II Mixing liquid. Included in Mark II kits above, but also available separately. thinning is generally unnecessary when Mark II is sprayed. However, if orange peel results, you may use Mark II Thinner with 5 parts mixed Mark II paint. Shelf life is four years in unopened storage. Pint ................P/N 09-03697 ............ $9.00 Quart .............P/N 09-03698 .......... $14.00 Gallon............P/N 09-03699 .......... $53.00 The Poly Fiber Covering Kit from Aircraft Spruce includes all of the materials generally required to recover a wide variety of small aircraft (see list below) except the fabric. When you order this Covering Kit from Aircraft Spruce, you can also order the presewn fabric envelope or fabric yardage you will need to cover the aircraft. Aircraft Spruce is the best choice for your covering materials requirements. Count on Poly Fibers largest distributor ...Aircraft Spruce!
Only the Cyclone has Varishake, adjustable haking power that automatically compensate for can size. A Cyclone will give you superior mixing power to quickly and completely separate and disperse individual metallic and pigment particles so you can match intensity and pitch exactly. Then, at a touch, your Cyclone will give your batch an extra gentle agitation while you are painting, to hold the batch in the fully mixed condition. Cyclone helps eliminate problems with panel to panel uniformity. Features: Clamps cans quickly, easily, positively. Thoroughly mixes most products in 60 to 90 seconds. Breaks up and resuspends well settled solids. Accepts pint through four-liter cans, including U.S. gallon, Imperial gallons, square gallons, and aerosol cans. (Some 5.1 cans, also 1/4 and 1/2 pts. stacked or with spacers.). Quiet. Mounts solidly. Rugged construction. Engineered and manufactured in the U.S.A. Cyclone Shaker .............P/N 09-00902 ........ $662.00 Cyclone Pedestal ..........P/N 09-00903 ........ $134.95
369
$48.00
Flap (60)
$48.00 $64.25 $38.50 Aileron (30) $25.50 $25.50 $48.00 $25.50 $30.75 $12.50 $12.50 $38.50 $25.50
$48.00 $64.25
Fuselage (20) $154.95 $296.95 $296.95 $90.00 $141.95 $196.95 $115.95 $205.95 $192.95 $334.95 $102.95 $253.95 $90.00 $201.95 $115.95
Flap (60)
Antiques Cessna Airmaster BMooney Mite Cessna T50/UC78 AN. American B25 Commonwealth Porterfield 35/70 BCulver Cadet Rearwin Sportster
Homebuilts CCassutt 111M AChipmunk Corbin Jr. Ace EAA Bipe Fokker Tri-Plane Meyer Toot Pietenpol Stampe SV4C DVolksplane I DVolksplane II 1 Does not include fabric for plywood wings - order separately. For individual wing envelope pricing, divide the number of wings on your CWittman Tailwind Part # 09-705 09-717 09-706 09-718 09-707 09-719 09-708 09-721 Price $709.00 $296.95 $1,252.00 $192.95 $1,046.00 $644.00 $399.95 $657.00 Antiques Skyranger ADeHavilland Heron Stinson 10/10A/10S Fleet Stinson AT19/V77 Funk Stinson SR5C Part # 09-722 09-710 09-723 09-711 09-724 09-712 09-725 Price $990.00 $386.95 $1,218.00 $593.00 $1,771.00 $1,073.00 $1,174.00 Model BGrumman TBMS Stinson SR9 BMeyer OTW Taylorcraft 15 Monocoupe DTravel Air 4000 AMooney 20A Piper PA-18 Part # 09-713 09-726 09-714 09-727 09-715 09-728 09-716 09-450 Price $412.95 $1,325.00 $576.00 $1,046.00 $606.00 $309.95 $72.00 $1,220.00
aircraft into the wing price. A Tails Only
B
COMPLETE SETS
370
ULTRALIGHT SAILS
Our sails are made in the United States by a top flight sail loft. These sails are made from the highest quality 3.9 oz. Dacron, many of them from the original OEM sail patterns. These sails are guaranteed to fit properly. All sail sets come complete with tail feathers and fuselage covers, except where noted. All sail orders are on custom-fabricated basis. Therefore, please allow an average of three weeks for delivery. There are no refunds on sail sets unless they are defective. Non-refundable 100% deposit or credit card purchase required. A wide selection of sail colors are available. Contact Aircraft Spruce for details on colors, patterns, and custom work. Prices subject to change without notice. Model Part No. Price Model Part No. Price MXL Sport 2 Complete Sail Set 09-01746 $1,750.00 Teratorn Aircraft MXL Sport 2 Wing Sail Set 09-01747 $1,425.00 Tierra 2-Place Sail set(excludes cabin enclosure) 09-01780 $1,845.00 MXL Super Sport Complete Sail Set 09-01748 $1,650.00 Tierra Complete Sail Set 09-01781 $1,856.00 MXL Super Sport Wing Sail Set 09-01749 $1,299.00 Tierra Wing Surface set 09-01782 $1,345.00 Sprint Complete Sail Set 09-01751 $1,225.00 T/A Complete Sail Set 09-01783 $1,198.00 Sprint Wing Sail Set 09-01752 $859.00 T/A Wing Surface Set 09-01784 $1,031.00 Sprint 2 Sail Set 09-01755 $1,335.00 Teratorn W/S Complete Sail Set 09-01785 $835.00 Sprint 2 Wing Set 09-01760 $965.00 Tierra Aileron Surface Set 09-01786 $227.95 GT 400 Complete Sail Set(Includes Pylon Cover) 09-01761 $2,315.00 Elevator Surface Set 09-01787 $155.95 GT 500 Complete Sail Set 09-01790 $2,306.00 Tierra Horizontal Stabilizer 09-01788 $194.95 GT 400 Wing Surface Set 09-01770 $1,265.00 T/A Horizontal Stabilizer 09-01791 $95.00 GT 500 Wing Surface Set 09-01771 $1,335.00 Tierra Vertical Stabilizer 09-01792 $85.00 GT 400/500 Wing Flap Set 09-01772 $215.00 T/A and Tierra Rudder 09-01793 $122.95 GT 400/500 Aileron Set 09-01773 $215.00 Star Flight Aircraft GT 400 Pylon Fairing 09-01774 $525.00 TX 1000 and 2000 Complete Sail Sets 09-01794 $1,252.00 GT 400/500 Stabilizer/Elevator Set 09-01775 $275.00 TX 1000 and 2000 Wing Surface Sets 09-01795 $1,136.00 GT 400 Rudder 09-01776 $145.00 Elevator Surface Set 09-01796 $100.00 GT 500 Rudder 09-01777 $245.00 Horizontal Stabilizer 09-01797 $105.95 GT 400 Vertical Stabilizer 09-01778 $50.00 Rudder Surface 09-01798 $95.00 GT 500 Vertical Stabilizer 09-01779 $1,447.00 Hurricane, Avenger & Phantom Aircraft 09-01799 $1,447.00 Complete Sail Set GT 500 Door Set (Left & Right) 09-01762 $825.00 Wing Surface Set 09-01801 $1,197.00 Wizard Aircraft Aileron Surface Set 09-01802 $270.00 Weight Shift Complete Sail Set 09-01808 $1,058.00 Elevator Surface Set 09-01803 $140.00 J-3 Complete Sail Set 09-01809 $1,169.00 Horizontal Stabilizer Surface Set 09-01804 $140.00 J-3 Wing Surface Set 09-01810 $965.00 Upper Vertical Stabilizer 09-01805 $80.00 T-38 Complete Sail Set 09-01811 $1,350.00 Lower Vertical Stabilizer 09-01806 $50.00 T-38 Wing Surface Set 09-01812 $1,170.00 Rudder Surface 09-01807 $105.95 J-3 & T-38 Elevator Surface Set 09-01813 $90.00 Advanced Aviation J-3b & T-38b Elevator Surface Set 09-01814 $90.00 Cobra A or B Complete Sail Set 09-01855 $1,724.00 J-3 & T-38 Rudder A or B 09-01815 $95.95 Cobra A or B Wing Surface Set 09-01856 $1,445.00 Flight Star Aircraft Cobra Aileron Surface Set 09-01857 $250.95 Flight Star Complete 2 Place Sail Set 09-01816 $2,162.00 Cobra Horizontal Stabilizer 09-01858 $165.95 Flight Star Complete Single Place Sail Set 09-01817 $1,614.00 Cobra Elevator Surface Set 09-01859 $140.00 Flight Star Wing Surface Set 09-01818 $1,090.00 Cobra Rudder Surface 09-01860 $115.95 Flight Star Aileron Surface Set 09-01819 $305.95 Explorer Complete Sail Set 09-01861 $1,776.00 Flight Star Elevator Surface Set 09-01820 $143.95 Explorer Aileron Surface Set 09-01862 $175.00 Flight Star Horizontal Stabilizer Surface 09-01821 $139.95 Explorer Wing Surface Set 09-01863 $1,327.00 Flight Star Vertical Stabilizer 09-01822 $75.00 Explorer Wing Flap Set 09-01864 $160.95 Flight Star Rudder Surface 09-01823 $95.00 Explorer Horizontal/Elevator Set 09-01865 $275.00 Flight Star 2-Place Left & Right Wing 09-01824 $1,327.00 Explorer Vertical Stabilizer 09-01866 $140.00 Rotec Rally Aircraft Explorer Rudder Surface 09-01867 $150.95 Rotec Ralley 2b & Champ Complete Sail Set 09-01826 $1,075.00 Explorer Gap Cover 09-01868 $95.00 Rotec Ralley 2b & Champ Wing Surface Set 09-01827 $890.00 Buccaneer 2 & Carrera 180 09-01869 $2,337.00 Rotec Ralley Sport Complete Sail Set 09-01828 $1,115.00 Buccaneer 2 Wing Only 09-01870 $1,223.00 Rotec Ralley Rally 3 Complete Sail Set 09-01829 $1,390.00 Buccaneer 2 Aileron Set 09-01871 $225.00 Rotec Ralley Rally 3 Wing Surface Set 09-01830 $1,235.00 Buccaneer 2 Vertical Stabilizer 09-01872 $179.95 Rotec Ralley Rally Wing Tip Option 09-01831 $90.00 Buccaneer 2 Rudder Surface Set 09-01873 $150.95 Rotec Ralley 2b & Champ Elevator Surface Set 09-01832 $90.00 Buccaneer 2 Stabilizer/Elevator 09-01874 $280.00 Rotec Ralley 2b & Champ Horizontal Stabilizer 09-01833 $90.00 Buccaneer 2 Gap Cover 09-01876 $95.00 Rotec Ralley Sport Elevator Set 09-01834 $110.95 Buccaneer 2 Flap Set 09-01877 $170.00 Rotec Ralley Sport Rudder 09-01835 $105.95 Buccaneer SX Sail Set 09-01878 $2,156.00 BI-RD Aircraft Carrera Complete Sail Set(Includes Pylon Cover) 09-01879 $2,245.00 BI-RD Complete Sail Set 09-01836 $1,526.00 Carrera Complete Sail Set BI-RD Wing Surface Set 09-01837 $1,218.00 09-01880 $1,249.00 Aileron Surface Set Carrera Wing Surface Set 09-01881 $225.00 09-01838 $140.00 Carrera Wing Surface Set 09-01882 $669.00 Elevator Surface Set 09-01839 $95.00 Carrera Wing Flap Set 09-01883 $173.95 Horizontal Stabilizer Surface Set 09-01840 $95.00 Carrera Aileron Set 09-01884 $150.95 Vertical Stabilizer Surface 09-01841 $45.10 Carrera Pylon Fairing 09-01885 $281.95 BI-RD Rudder 09-01842 $85.00 Quicksilver Aircraft Condor Aircraft MX Complete Sail Set 09-01736 $975.00 Condor Complete Sail set 09-01843 $1,160.00 MX Wing Surface Set 09-01737 $729.00 Condor Wing Surface Set 09-01844 $940.00 MX Qualifier Complete Sail Set 09-01738 $1,246.00 Elevator Surface Set 09-01845 $105.95 MX Qualifier Wing Set 09-01739 $1,089.00 Horizontal Surface 09-01847 $105.95 MX Tapered Stabilizer Option 09-01763 $60.00 Rudder Surface 09-01848 $90.00 MX Horizontal Stabilizer 09-01765 $80.00 Weedhopper Aircraft MX Rudder Surface 09-01768 $95.00 Weedhopper Super Nova Set 09-01849 $1,620.00 MX-MXL Elevator Set 09-01764 $95.00 Weedhopper C or B Complete Sail Set 09-01850 $1,475.00 MX2 Complete Sail Set 09-01740 $1,015.00 Weedhopper C or B Wing Surface Set 09-01851 $1,295.00 MX2 Wing Surface Set 09-01741 $744.00 Weedhopper Stabilizer/Elevator Surface Set 09-01852 $290.00 MX2 H.P. Complete Sail Set (X-tra Ribs/ Weedhopper Sub Fin Surface 09-01853 $55.00 09-01742 $1,150.00 Tapered Stabilizer) Weedhopper Rudder Surface 09-01854 $85.25 Quicksilver Weight Shift Rudder 09-01769 $85.00 Quicksilver Weight Shift Complete Sail Set 09-01743 $875.00 FOR A COMPLETE LISTING OF ULTRALIGHT SAILS, COLOR MXL Complete Sail Set 09-01744 $1,595.00 CHARTS, AND DIAGRAMS, PLEASE VISIT MXL Wing Surface Set 09-01745 $1,250.00 www.aircraftspruce.com MXL Aileron Surface Set 09-01766 $259.00 MXL Tapered Stabilizer 09-01767 $100.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
371
CECONITE FABRIC
CECONITE 101 (3.4 oz.) - Much stronger and far more durable than cotton. It has a probable lifetime durability. 70 Width .. P/N 09-00700 ..$13.30 /lin. yd CECONITE 102 (2.6 oz.) - A fine weave medium weight fabric to be used as a replacement for intermediate weight cotton fabric as described in TSOC15. 70 Width .......... P/N 09-00900 ......$11.95 /lin. yd UNCERTIFIED LIGHT - 1.7 oz., lightweight fabric recommended for covering ultralight aircraft. This fabric will be unstamped. It is not approved for certified aircraft except over plywood surfaces. 66 Width ........... P/N 09-00921 .......$8.40 /lin. yd
This FAA approved process utilizing Ceconite polyester fabrics and the Randolph line of finishes assures a beautiful, durable, weather-resistant cover job every time. The Ceconite cover process was issued Supplemental Type Certificate No. SA4503NM in 1997, and this number will apply to all aircraft. Note: Only Randolph materials may be used through the topcoat paint to comply with STC requirements. Randolph finishes are required for approval. Ceconite is approved for use on most certified aircraft. To be sure, check the Approved Model List in the latest revision of Procedure Manual 101 for the Ceconite Aircraft Covering Process.
CECONITE TAPES
New Super Seam Fabric Cement. Not compatible with original nitrate-based Super Seam. Used to attach Ceconite Fabric to structures. High solids nitrate based cement approved in the Ceconite STC. 1 Qt. ........................P/N 09-18100 .............. $27.25 1Gal.........................P/N 09-18200 .............. $99.80
yds...................... 09-41111 ......................... $16.05 yds...................... 09-41116 ......................... $17.65 yds...................... 09-41120 ......................... $30.20 yds...................... 09-41125 ......................... $23.20 yds...................... 09-41135 ......................... $27.80 yds...................... 09-41145 ......................... $32.40 yds...................... 09-41166 ......................... $45.00 yds. .................... 09-41251 ......................... $16.05 yds. .................... 09-41255 ......................... $17.65 yds. .................... 09-00298 ......................... $23.20 yds. .................... 09-41252 ......................... $30.20 yds. .................... 09-41253 ......................... $27.80 yds. .................... 09-41254 ......................... $32.40 yds. .................... 09-41256 ......................... $45.00
For use on curved edges. 2 ...................... 25 yds. .................... 09-41165 ......................... $32.45 3 ...................... 25 yds. .................... 09-41170 ......................... $46.15 4 ...................... 25 yds. .................... 09-41175 ......................... $57.35
Star-Tak is a vinyl-based cement that is used to cement aircraft fabric to steel, aluminum, wood, or composite surfaces. It is also used to join fabric together in overlapped cemented seams. It dries to the touch in 15 to 20 minutes in normal temperatures. In two hours, it develops a bond strong enough to allow heat shrinking the fabric. Quart .................... P/N 09-02583............... $27.25 Gallon................... P/N 09-02584............... $99.80 Gray Sealer is used to seal Ceconite fabric prior to spraying Silver Urethane Fabric Primer. This coat prevents pinholes in the Silver Urethane Fabric Primer. Gray Sealer is also used to apply Ceconite finishing tapes. It is tinted translucent gray to help see it when applied. Quart .................... P/N 09-02577............... $25.55 Gallon................... P/N 09-02578............... $85.00 5 Gallon................ P/N 09-02579............. $420.00 Thinner for Gray Sealer. Mix three parts Gray Sealer to one part Sealer Reducer. Shelf Life: Four years, unopened in protective storage. Not affected by freezing. Quart .................... P/N 09-02580............... $15.40 Gallon................... P/N 09-02581............... $48.25 5 Gallon................ P/N 09-02582............. $230.90
Silver Urethane Fabric Primer is a polyurethane product that serves two purposes: to build the coating over the fabric to prepare for paint, and to protect the fabric from UV radiation. Silver Primer uses a metallic-like flake additive. This proven system results in a positive metallic light block and reflection to both visible and invisible UV without relying on chemical UV light blockers. Quart .................... P/N 09-02585............... $28.75 Gallon................... P/N 09-02586............. $101.20
Silver Urethane Fabric Primer Catalyst is the only catalyst that can be used with Silver Urethane Fabric Primer. Note that unlike other catalysts it is mixed at a four to one ratio of primer to catalyst. 1/2 Pint ................. P/N 09-02587............... $34.50 Quart .................... P/N 09-02588............... $78.20
A special blend of solvents specifically formulated for use with Ranthane and Star Gloss Silver Urethane Fabric Primer. Gallon................... P/N 09-02590............... $31.00
114 pages of step-by-step instruction on how to cover your airplane with the Ceconite/Star Gloss system, helpful photos, great nostalgic cartoons, extra words of wisdom, and a delightful sense of humor. Includes catalog of products, everything from fabrics to top coat paint. P/N 09-02576 .................... $10.00
372
FABRIC TAPES
A layer of 2.7 oz. Dacron fabric strips or tape laminated into a layup as if it were an extra ply of glass. The peel coat wets out with epoxy like glass cloth and cures along with the rest of the layup. However, the Dacron does not adhere structurally to the glass and when peeled away it leaves a surface ready for glass-to-glass bonding without sanding. Requirements for Small Aircraft: For Expermental Aircraft. 3 Rolls of 1 x 50 Yds. Tape 2 Rolls of 2 x 50 Yds. Tape 1 Roll of 3 x 50 Yds. Tape 1 Roll of 4 x 50 Yds. Tape Width Smooth Edge Pinked 50 Yd P/N Price/ P/N Price/ Roll 09Roll 09Roll 1 15000 $6.50 15450 $6.90 2 15100 $14.25 15500 $13.75 3 15200 $21.75 15600 $21.75 4 15300 $28.75 15700 $29.00 6 15400 $44.25 15800 $44.25 Discount Schedule for Dacron Tapes: Less 10% for 12 Rolls (assorted) Less 15% for 25 Rolls (assorted). Request quote on larger quantities.
Advantages: Save TIME with easy installation Save OPERATING COSTS with improved energy efficiency Save REPAIR COSTS with long lasting quality at high temp Save ON PRICE with quantity discounts CHARACTERISTICS Fibers Ceramic Application Insulation with bolt holes Weave Style Drop Warp Thickness .125 in Bolt Diameter Up to .75 in Continuous Service 1,800F Maximum Use 2,300F Durability High Strength Coating Plain or Vermiculite Avail. Type Width ThicknessRoll Length Part No. Price 1/8 Thickness - Plain 2 .125 100ft. 05-03510 $106.75 1/8 Thickness - Ver2 .125 100ft. 05-03511 $133.90 miculite Coated
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Poly/Dacron blend is excellent as peel ply for composite lay-ups, and for covering expermental aircraft. 2.7oz. 64-66 #604 ....P/N 09-00300 ....$4.75/yd. 1.8 oz. X 64 #611 .....P/N 09-00100 ....$3.90/yd. 2.97 oz. X 62 #605 ...P/N 09-00500 ....$3.95/yd.
Use to melt drain holes and inspection rings in polyester fabric. 35 Watt, 900F tip. Tip is replaceable & long life coated. P/N 09-37430 .......................... $77.25
SOLDERING IRON
Only synthetic threads and rib lacing cords should be used with Dacron covering to insure uniform strength. Waxed linen rib cord Conforms to PMA# TQ0075NM and STC# SA1008WE. Material Dacron Machine Sewing Thread Dacron Hand Sewing Thread Quantity 500 Yds. 250 Yds. Part No. 09-03900 09-04000 Price $15.25 $11.75
2 prong plug
This handy tool gives you a fast, drum-tight, mirror smooth finish. Its ideal for heat-shrinkable covering films. Get a professional finish with less time and effort. 1-year warranty. Features: Includes removeable wide nozzle 1000-watt heating power Heavy-duty fan motor Textured, composite hand-grip 3-position, hot/cool/off switch Adjustable air intake baffle Weight: 15 oz 5.5 AC power cord with P/N 12-00527 ......................$27.50
A superior quality cement for strong splice joints. Use to cement tapes, rings and grommets to fabric cover. 1 Pint ...........................P/N 09-17800 .................$12.90 1 Qt ..............................P/N 09-17900 .................$17.75 1 Gal. ...........................P/N 09-18000 .................$56.75
This Pocket thermometer can eliminate 80% of your iron-on covering problems. These problems are caused by your irons temperature varying as much as 60 while in use, which causes bubbles and sags. If you are using an iron other than Black Baron, this thermometer is a must in monitoring iron temperatures. P/N 09-37500.............$7.50
POCKET THERMOMETER
A fine quality tool to test fabric covered aircraft for minimum FAA requirements without removing or punching holes in fabric. Also used to test struts for inside rusting as required by FAA on all Piper aircraft with struts. P/N 09-14900 ........ $294.00
373
PTI Specialty Paint & Coatings, exclusively from Aircraft Spruce & Specialty Co., are featured in space, aerospace and aviation applications throughout the world -- the Space Shuttle and Space Station projects, the Patriot and Stinger missile projects and in refurbishing of landing gear for commercial aircraft. Now, Aircraft Spruce brings PTI products to General and Sport Aviation. See all PTI Paint Products at www.aircraftspruce.com 1. Paint Strippers Note: Strong professional recommendation These products have been specifically formulated to work together. Maximum adhesion, durability and performance is achieved 3. Topcoats: A chemical resistant when these products are applied as a system. To Purchase Your Specialty Paint System Polyurethane with UV protectors Simply tell us the make and model of your aircraft, and the Federal 595 Color see chart on our website at: www.aircraftspruce.com Need a custom color that is not on the chart? 4. PTI Polykick to accelerate drytime Ask us, we can help you with that too. 5. Cleaners 2. Primers: Acid Etch and Epoxy
PTI-MEK is virgin (not recycled) MEK that may be used to clean and prepare the substrate for painting. PTI-MEK may also be used to clean brushes, paint guns and other painting tools. PTI-Acetone is virgin (not recycled) Acetone that may be used to remove lacquer finishes, for cleanup after painting, and to soften lacquers or acrylics that set up in spray guns or hoses. Acetone is not effective on urethanes and should not be used. Use MEK for cleanup on urethane products. Use only virgin acetone. Recycled acetone can damage virtually anything to which it is applied. H. PTI-Toluene is virgin (not recycled) toluene that may be used as a reducer for enamels and other coatings in the alkyd family. Do not use with PTI chromate and chromate free primers. Instead, use PT-1022X66 reducer. PT-1045 is a reducer specially formulated to compliment the PTI Air Dry Wash Primer. PT-1022X66 is a reducer specially formulated to compliment the PTI chromate and chromate free primers. PT-1003 Type II is a reducer specially formulated to compliment the PTI Epoxy primer.
Part No. 09-00967 09-00943 09-00942 09-00972 09-00971 09-00974 Price $2,218.00 $21.25 $45.75 $17.95 $32.50 $17.95 Description Acetone Gal. Toluene Qt. Toluene Gal. Part No. 09-00973 09-00976 09-00975 Price $32.50 $18.25 $27.75
PTIs Epoxy Primer is a low VOC (volatile organic compounds) epoxy polyamide solvent primer which conforms to the military specification MIL-P-23377 Rev. E. This coating is highly recommended for use on aluminum and all plated or unplated metallic surfaces to insure maximum protection against corrosion. This primer may be used as an interior or exterior primer that insures maximum adhesion of any paint or lacquer finish coats. NOTE: Before applying, refer to the technical data sheet for this product. *Must be shaken for 15 min. on a paint shaker. Description Yellow QT KIT Yellow GAL KIT Green QT KIT Green GAL KIT Epoxy Thinner QT Epoxy Thinner Gal Part No. 09-00934 09-00932 09-00935 09-00933 09-00937 09-00936 Price $82.50 $228.95 $82.50 $228.95 $21.25 $45.50
EPOXY PRIMER
PTIs Zinc Chromate Primer is formulated to exceed the performance standards in the Federal Specification TT-P-1757. This primer promotes maximum adhesion to bare aluminum and steel and is recommended for that purpose. PTIs zinc chromate primer is a formulation proven to perform.
Description Part No. Price Zinc Chromate Yellow Spray 13 oz. Zinc Chromate Yellow QT Zinc Chromate Yellow Gal Zinc Chromate Yellow 5Gal Zinc Chromate Green Spray 13 oz. Zinc Chromate Green QT Zinc Chromate Green Gal Zinc Chromate Green 5Gal 1022X66 Reducer QT 1022X66 Reducer Gal 09-00901 09-00919 09-00922 09-00952 09-00895 09-00917 09-00918 09-00953 09-00956 09-00954 $9.95 $40.50 $86.50 $388.95 $9.95 $39.75 $86.50 $388.95 $15.90 $35.75
PTIs Air Dry Wash Primer requires no sanding and is a polyvinyl butyral zinc chromate formulation that may be used to prime all plain or plated metallic surfaces. Priming surfaces with this primer will ensure maximum adhesion of all bake or air-dry finish coats (including lacquer finish coats). The finely ground emulsions of zinc chromate pigment, resins and phosphoric acid hardeners are virtually non-settling. For the best results follow the instructions on the technical data sheet. This primer exceeds the performance standards specified in Department of Defense specification (DOD) 15328 and Military Specification MIL-8514. Description Yellow Acid Etch Primer QT. Yellow Acid Etch Primer Gal. Yellow Acid Etch Primer 5Gal Green Acid Etch Primer QT Green Acid Etch Primer Gal Green Acid Etch Primer 5Gal Reducer 1045 QT Reducer 1045 GAL Part No. 09-00948 09-00946 09-00944 09-00949 09-00947 09-00945 09-00951 09-00950 Price $31.25 $72.75 $306.95 $30.75 $72.75 $306.95 $16.50 $35.75
PTIs Zinc Oxide Primer is formulated to exceed the performance standards in the Federal Specification TT-P-1757. Promotes maximum adhesion to bare aluminum and steel. Formulated to provide a high performance primer that is considered a safer, more environmentally friendly, alternative to the zinc chromate primer.
Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Oxide Oxide Oxide Oxide Oxide Oxide Oxide Oxide Description Yellow Spray 13 oz. Primer Yellow QT Primer Yellow Gal Primer Yellow 5Gal Green Spray 13 oz. Primer Green QT Primer Green Gal Primer Green 5Gal Part No. 09-01617 09-00961 09-00959 09-00957 09-00904 09-00962 09-00960 09-00958 Price $9.95 $42.25 $90.50 $392.95 $9.95 $41.95 $89.95 $388.95
PT-573 is a two component epoxy based primer. PT-573 is capable of filling small holes and imperfections before topcoating. PT-573 provides a smooth, sandable base coat that improves the adhesion and appearance of the topcoat. Because of PT-573s unique formula, this primer also provides excellent rust and corrosion protection. This sandable primer is compatible with PTIs epoxy and Polyurethane topcoats.
Description PTI 573 Sandable Primer 2 gallon PTI 573 Sandable Primer 1 gallon PTI 573 Sandable Primer Quart Part No. 09-02311 09-02312 09-02313 Price $137.95 $79.95 $58.25
374
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Chemical and solvent resistant. It is a TUF/FILM epoxy primer that conforms to MIL-PRF -85582D. It is especially recommended to inhibit corrosion of aluminum and other plated or unplated metallic surfaces. That being said this primer is also able to be used on composite surfaces. The Water Reducible Epoxy Primer has one of the lowest VOC levels of any primer of its kind on the Navys QPL. This primer should be used with PTI topcoats to provide maximum adhesion and corrosion protection. May be used with any other manufacturers paint or lacquer finish coats. Light Green Primer Quart ............................................... P/N 09-02679.............................. $108.95 Light Green Gallon Primer kit with Catalyst .................... P/N 09-03436.............................. $172.50 Dark Green Primer Quart ............................................... P/N 09-02681................................ $58.50 Dark Green Primer Gallon .............................................. P/N 09-02682................................ $95.00 Catalyst Pint ................................................................... P/N 09-02683................................ $33.50 PTIs Anti-seize Compound is a silicone base grease with a high pigmentation of micro fine molybdenum disulfide. It is heat stable and will not decompose or form a gum deposit. It is effective under light or medium bearing loads on steel to bronze, metal babbit, zinc, nylon, Teflon or hard-anodized aluminum surfaces. Normally it is suitable for operating temperatures of -65 F to + 1000 F. Pint .................P/N 09-02901 .............$80.75 Quart ..............P/N 09-02902 ...........$125.95
Formulated to help epoxy and polyurethane topcoats flow to their maximum ability. Keeps the coating open to allow bubbles to escape and the surface to flow in high temperature conditions. Refer to the manufactures technical data before using this product. 4 oz.................P/N 09-02672 .............$11.75 8 oz.................P/N 09-02673 .............$16.75 16 oz...............P/N 09-02674 .............$11.75
Moly spray is unequaled as a lubricant for machine tools, plastic molding machines, paper and textile making equipment, oven mechanisms, and sheet metal and tube bending operations. Provides lubrication on surfaces for which a wet or liquid lubricant is undesirable. P/N 09-02903 .....................................$13.50
Used as an additive to slow down the dry time of fast drying paints and primes. During hot and dry temperatures, coatings have a tendency to solvent pop and/ or dry spray. This retarder keeps the material wet allowing it to flow, dry, and cure as it should. 4 oz.................P/N 09-02675 ...............$8.50 8 oz.................P/N 09-02676 .............$16.75 16 oz...............P/N 09-02677 .............$30.00
375
HOW TO ORDER:
Add the following dash numbers after the Base Part No. listed in the chart for the size and type desired. For PTI Polyurethane:: Qt. Size add -13 Gal. Size add -14 For PTI Enamel:: Qt. Size add -23 Gal. Size add -24 Qt. Size add -33 Gal. Size add -34
EL AV TO PS BV
Other products used with: Use only with PTI Polyurethanes. Typical Uses: PTI PolyKick is formulated to accelerate the cure time for PTIs polyurethane formulations. 4 oz. ..................... P/N 09-02670........................$11.75 8 oz. ..................... P/N 09-02671........................$16.75 This kit will provide all the materials needed to paint any RV or similar size aircraft. The kit consists of: Green Acid Etch Primer & Reducer Yellow Epoxy Prime, Catalyst, & Reducer Polyurethane White topcoat, with catalyst & Reducer -Clear coat sold separately Additional colors are available upon request, for an additional cost. Paint KIT .......................................P/N 09-02074 ........................$999.00 Clear Coat Kit ...............................P/N 09-02073 ........................$257.95 These samples are an approximate computer representation of the actual color and are to be used for reference only. P/N 09-01969 ...........................................FREE
PLANE SIZE Small Plane: Cessna, Beechcraft Medium Plane: Lear Jet, Gulfstream Large Plane: Commerical Embraser Commuter Extra Large Plane: Airbus, 747
Always refer to Technical Data before use for mixing instructions and curing times. Description Size PN Price Polyurethane Catalyst Gal 09-01256 $120.95 Polyurethane Catalyst Qt 09-01964 $56.50 Polyurethane Thinner Qt 09-01657 $16.70 Polyurethane Thinner Gallon 09-01658 $35.60
www.aircraftspruce.com
376
CM WP
FAA/PMA
In January 2005, Certified Coatings Products received FAA-PMA (Federal Aviation Administration Parts Manufacturing Approval) for use on Ceconite fabric. The products have always been approved for use on any other fabric. (PMA#PQ2435NM)
ME HA AP LG EP
*Add 5% to 10%, as needed, of this blend of fast-cutting, highboiling solvents to prevent dope blushing under conditions of high humidity. Also improves flow by slowing drying time. Certified Coatings offers only a limited number of colors in butyrate dope which have been selected as standards. The colors will match as closely as possible the corresponding color on the Randolph selection card reproduced in this catalog.
CS IN EL AV TO PS BV
To Order: Use Product # plus QT for Qt., 1G for Gal. and 5G for 5 Gal. Ask for Certified Coatings Products Co. color chart. ...........................................................P/N 09-02118 ............................................................... FREE
ALUMINUM PASTE - Mix 4 ounces of Aluminum Paste to 1 gallon of Certified Coatings N/T Butyrate Dope. 1 Lb. ............ P/N 09-02417 ............$22.85
This non-tautening butyrate UV barrier can be sprayed or brushed over nitrate or butyrate coatings for optimum ultra-violet ray protection. Quart ................P/N 09-12300 .......... $42.25 Gallon ...............P/N 09-12310 .......... $71.25 5 Gallon ............P/N 09-12320 ........ $310.95
CERTI-FILL SILVER
Removes urethanes, epoxies, lacquers, primers, enamels, vinyls, varnishes, acrylics, shellac and polyesters. Washing off with water leaves a clean film-free surface that is ready for refinishing. Product of Certified Coatings Products Co. 1 Qt. .................P/N 09-05701 .......... $16.50 1 Gal.................P/N 09-05710 .......... $26.75 5 Gal.................P/N 09-05715 ........ $116.95
377
Sunmight Waterproof is made with quality water resistant paper backing for flexibility and outstanding finish. Special resin technology reduces possible curling problem during wet sanding operations. Features:Wet or dry sanding for all surface, Finest finishing even under wet sanding, Long durability without tearing or curling, Superior cutting for hand sanding. Specifications: Grain: Grit 220~800 Aluminum Oxide; Grit 1000~2000 Silicon Oxide, Backing: Latex Paper, Bond: Resin over Resin, Coating: Closed Coat, Grit Range: 220-2000, Box: 250. Grit Part No. Price Grit Part No. Price 600 09-03114 $29.25 220 09-03108 $29.50 1000 09-03115 $32.50 240 09-03109 $26.85 1200 09-03116 $29.90 280 09-03110 $29.25 1500 09-03117 $29.90 320 09-03111 $29.25 2000 09-03118 $32.50 360 09-03112 $26.85 400 09-03113 $29.25
Sunmight Film is a premium product with strong and even surface film backing that allows better surface finish and longer life. It is also great for corner and edge sanding without problems with tearing. Specifications: Grain: Premium Aluminum Oxide, Backing: Polyester Film, Bond: Phenolic Resin, Coating: Open Coat, Grit Range: 36-2000, Box: 50. Price $47.85 $47.85 $47.85 $47.85 Grit 240 320 400 500 Part No. 09-03123 09-03124 09-03125 09-03126 Price $47.85 $47.85 $47.85 $47.85
TOP PAINT STRIPPER - EF 6600-B (Brush/Spray type) Environmentally Advantaged TOP Paint Stripper 6600-B has been specially formulated for aircraft and marine applications. * Boeing Certified (D6-17487) * No Methylene chloride, No Phenols, No Chromates, no chlorinated solvents * PH neutral * Low odor * High Flashpoint; non-flammable * No heat needed * Ideal for removing multiple layers of paint * Easily rinsed from parts with either steam or high pressure water. Note: 55 Gallon drums are shipped direct for customer from factory in Canada.
Size 1 Gal Can 5 Gal Pail 55 Gal Drum Part Number 09-02139 09-02140 09-02141 Price $57.85 $243.95 $1,356.00
Sunmight God is a premium paper product made with high quality grain, latex paper and strong resin. This provides better performance and longer life. Features: Aluminum Oxide resin paper, Open coat, Tear resistance, Good Sharpness and longer lasting life, High performance without clogging, Excellent finish. Specifications: Grain: Premium Aluminum Oxide, Backing: Latex Paper, Bond: Phenolic Resin, Coating: Open Coat, Grit Range: 80-320, Box: 100. Price $23.95 $21.50 $21.50 $21.50 Grit 180 220 240 320 Part No. 09-03104 09-03105 09-03106 09-03107 Price $21.50 $21.50 $21.50 $21.50
FABRIC REJUVENATORS
Sunmight Film is a premium product with strong and even surface film backing that allows better surface finish and longer life. It is also great for corner and edge sanding without problems with tearing. Features: Open coat stearated, Excellent Cutting Performance, Longer lasting life with durability, Perfect sanding surface, Especially, excellent for contour snading without folding. Specifications: Grain: Premium Aluminum Oxide, Backing: Polyester Film, Bond: Phenolic Resin, Coating: Open Coat, Grit Range: 80-320, Box: 100. Grit 80 100 120 180 Part No. 09-03092 09-03093 09-03094 09-03095 Price $32.50 $26.75 $29.25 $26.75 Grit 220 240 320 Part No. Price 09-03096 $26.75 09-03097 $26.75 09-03098 $26.75
378
Used only on Grade A cotton or Irish Linen. A premium high solids nitrate dope that tightens natural fabric as it dries. Not for use on Ceconite or heat-shrunk synthetic fabrics. Thin 1:1 w/286 Nitrate Thinner. Quart ......................P/N 210-QT ...........$14.65 Gallon ....................P/N 210-1G ...........$44.10 5 Gallons ...............P/N 210-5G .........$212.35
Used to soften older dope coatings which exhibit cracking or ring-worming. Restores plasticizers in aged finishes to add flexibility. Only works on aircraft painted with butyrate dope; will not work on polyurethane topcoat finishes. Quart ......................P/N 09-14505 ..........$27.20 Gallon.....................P/N 09-14510 ..........$81.65 5 Gallons ................P/N 09-14515 ........$400.15
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Initial coating for Ceconite or heat shrunk polyester fabric. Additional plasticizers slow shrinking after application. Thin 1:1 with 286 Nitrate Thinner. Quart ............P/N W-7868-QT....... $16.05 Gallon...........P/N W-7868-1G ....... $47.85 5 Gallons ......P/N W-7868-5G ..... $231.50
Rand-O-FillG-6303 is a non-tautening butyrate material designed as the aluminum spray coat over Rand-OProof G-6302, over Nitrate Clear Dope or Butyrate clear Dope. Allow to dry. Wet sand to desired smoothness. Wash and allow surface to completely dry before applying following coat. Thin as needed with Butyrate Thinner. Quart ................P/N G-6303-QT ....... $18.45 Gallon ...............P/N 09-01018 .......... $55.55 5 Gallons ..........P/N 09-01019 ........ $269.25 A fine mesh paste which is easier to use than powder. Mix 4 oz. by weight of paste to one gallon of clear butyrate dope before thinning. 1 Lb. .................P/N 09-14500 .......... $21.10
Initial coating for Ceconite or heat shrunk polyester fabric. For use on open cockpit aircraft where tinted dope is not desired. Thin 1:1 w/286 Nitrate Thinner. Quart .................. P/N E-4964-QT ......... $15.95 Gallon................. P/N E-4964-1G ......... $47.60 5 Gallons............ P/N E-4964-5G ....... $230.60
Used 1:1 to thin butyrate dopes & pigmented butyrate colors. Quart ..................... P/N 9703-QT ............ $11.30 Gallon .................... P/N 9703-1G ............ $42.75 5 Gallons ............... P/N 9703-5G .......... $210.00
Special formulation of nitrate dope and additives for the initial coat on Ceconite fabric and for applying tapes. This is the recommended first coat in the Ceconite/ Randolph system. Thin 1:1 with 286 Nitrate Thinner. Quart ....................P/N G-6302-QT ........ $16.20 Gallon ....................P/N G-6302-1G ........ $49.90 5 Gallons ...............P/N 09-01017 ......... $233.40
Prevents blush in nitrate and butyrate products. Also used to slow nitrate and butyrate drying in high temperatures. Quart ..................... P/N Y-9910-QT .........$14.80 Gallon .................... P/N 09-01048 ............$46.75 5 Gallons ............... P/N 09-01049 ..........$213.65
For use as a build coat after E-4964 Non-Tautening Nitrate (Clear) on open cockpit aircraft where tinted dope is not desired. Thin 1:1 with 9703 Butyrate Thinner. Quart ......................... P/N 09-00817.......... $16.70 Gallon........................ P/N 09-00818.......... $49.90 5 Gallons ................... P/N 09-00819....... .$241.45
Used only on Grade A Cotton or Irish Linen to tighten the fabric as it dries. Not for use on Ceconite or heat-shrunk synthetic fabrics. Thin 1:1 with 9703 Butyrate Thinner. Quart .................. P/N 9701-QT.............. $15.60 Gallon .................. P/N 9701-1G .............. $46.60 5 Gallons ............. P/N 9701-5G ............ $224.40
This non-taughtening butyrate dope features an increased level of plasticizer and will not tauten excessively. Takes longer to dry than standard butyrates. Tinted. Used to apply finishing tapes. Additional plasticizers slow shrinking. TINTED LIGHT TAN BUT DRIES CLEAR. Recommended initial build butyrate coating to follow Rand-O-Proof in the Ceconite/Randolph system. Thin 1:1 with 9703 Butyrate Thinner. Gallon ...............P/N 09-00788 ...........$50.15 5 Gallons ..........P/N 09-00789 .........$242.50
This specialty product is used as a spray on the bottom of aluminum floats on amphibious aircraft to protect them from marine growth. Reduce with Randolph 286 Nitrate Thinner. Qt ................................P/N 09-00830 ................$17.50 Gal...............................P/N 09-00831 ................$52.75 5 Gal ...........................P/N 09-00832 ..............$258.05
55 Gallon Drums - For 55 gallon drum of Randolph product, use basic P/N D55 - Example: 210-D55
Battery Box Black Paint is an asphaltic coating used to provide protection from battery acid in battery boxes and compartments. It is generally applied with a brush or roller to any metal area that may be exposed to leaking battery acid. Shelf life: Guaranteed 2 years from date on manufacture in sealed container in protected storage. Coverage: 225 square feet per gallon with one coat. Mixing: Stir well before use.Thinning: Use out of the can. If thinning is necessary, thin five parts paint to one part 286 Nitrate Thinner. Application: Apply with a brush. Three coats will provide the best possible protection to epoxy primed metal surfaces.Qt. .................... P/N 344-QT ................... $16.85 ALL mixed paints are special order and are non-returnable.
379
RANDOLPH FINISHES
RANDOLPH COLOR PRODUCTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
RANDOLPH COLORED NON-TAUTENING BUTYRATE DOPE - The final color coat applied over
fabric in the Ceconite/Randolph system. Available in 50 standard colors. Thin one to one with 9703 Butyrate Thinner. One thinned gallon covers approximately 200 sq ft with one coat.
COLORS Reds B-3534 Madrid Red B-9163 Colorado Red M-9522 Tennessee Red M-9530 Vermillion Red W-3665 Pontiac Red J-9555 Cadillac Red H-9150 Santa Fe Red X-5680 Boston Maroon* X-5749 Stinson Maroon Standard Colors M-9526 Cruiser Orange C-2065 Ocala Orange E-6427 Aeronca 7AC Yellow M-9512 Lemon Yellow M-9501 AN Orange Yellow F-6285 Cub J-3 Yellow M-9521 Lock Haven Yellow Y-5783 Dallas Yellow* D-9270 Ag Cat Yellow N-3353 Federal Yellow F-2406 Federal Green F-5830 Montego Green* Y-6350 Forest Green* W-3554 Lakeland Blue W-9506 AN True Blue H-9170 Bahama Blue X-5700 Miami Blue M-9502 Insignia Blue Z-7245 Sun Valley Ivory M-9518 Diana Cream X-5260 Tucson Cream* Q-1050 New Insignia White W-9170 Tropic White K-7641 Vestal White B-4243 Juneau White J-9545 Daytona White Q-1916 RandolphWhite F-7790 AG Cat Gray R-4870 Neutral Gray R-8174 Platinum Gray Y-6100 Polar Gray H-6117 Black R-8175 Sandalwood* Y-9775 Hickory Brown R-4869 Olive Drab* (Glossy) E-6428 Aeronca 7AC Orange P-8600 Cessna Tiger Orange Metallic Colors W-8427 Tampa Green* W-8430 Newport Blue* M-9514 Silver B-9916 Reno Gold
BUTYRATE For Fabric Only Qts. Gals. $22.00 $24.20 $24.20 $24.20 $24.20 $24.20 $24.20 $30.75 $24.20 $24.20 $22.00 $25.65 $24.20 $22.00 $22.00 $22.00 $22.00 $24.20 $22.00 $22.00 $22.00 $27.75 $22.00 $24.20 $22.00 $22.00 $22.00 $26.25 $24.20 $24.75 $23.50 $17.60 $17.60 $23.75 $17.60 $19.35 $22.00 $22.00 $22.00 $22.00 $22.00 $22.00 ---$22.00 $22.00 $22.00 $22.00 $22.00 $22.00 $38.50 $84.70 $84.70 $93.15 ---$84.70 $84.70 $84.70 $84.70 $84.70 $84.70 $84.70 $77.00 $84.70 $77.00 $84.70 $77.00 $84.70 $84.70 $84.70 $77.00 $84.70 $84.70 $77.00 $98.00 $84.70 $77.00 $84.70 $84.70 $84.70 $84.70 $83.75 $63.80 $70.20 $87.00 $63.80 $63.80 $77.00 $84.70 $77.00 $77.00 $77.00 $77.00 $77.00 $77.00 $104.95 $84.70 $84.70 $84.70 $77.00 $84.70
Mark II For Metal Only Qts. Gals. $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $59.25 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $58.75 $48.35 $48.35 $48.35 $48.35 -$66.75 $59.00 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $66.75 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $239.95 $200.50 $200.50 $200.50 $194.95 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $192.95 $147.45 $147.45 $147.45 $147.45 $147.45 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50 $200.50
RANTHANE HIGH SOLIDS CATALYST Pint ............... P/N 09-00328 ...............$33.50 Use w/ High Solid Polyurethane Qt.................. P/N 09-00400 ...............$63.15 RANTHANE ACCELERATOR - Qt. .......... P/N D-7201-QT.............$44.85 RANTHANE REDUCER - Qt.................. P/N G-4200-QT ............$14.00 Gal. ............... P/N G-4200-1G .............$49.00 The FAA has approved the use of Ranthane over Poly-Fiber. To order Ranthane colors, please specify Randolph color from chart on right and specify quart or gallon.
NOTE: Randolph paints are now manufactured by Consolidated Coatings and will not exact match old Randolph colors. If you are ordering to match old Randolph colors, please provide a paint sample that can be matched by the factory.
MARK II THINNER - Used as needed to thin Mark II for Metal after combining with Mark II Mixing Liquid to increase flow out. Pt .....................P/N 09-02195 ................$9.00 Qt .....................P/N 09-02196 .............$14.00 Gal ...................P/N 09-02197 .............$53.00
Formulated to be heat resistance and maintain good gloss and color retention. For use in the painting of engine crank cases and cylinders, after major overhaul or for general maintenance. Can also be used on engine mounts and supports. Service temperature is 300-350 degrees F. Reduction: Thin to correct spray viscosity with #257 Enamel Thinner(approximately 20% reduction). Application: Spray two coats. Allow to dry to the touch between coats. Quart Gallon Part No. Price Part No. Price 303 Black 303-QT $22.00 303-1G $57.35 D-5973 Continental Gold D-5973-EQ $22.00 D-5973-EG $65.95 G-5436 Lycoming Gray G-5436-EQ $22.00 ----Color
Fast drying thinner for use with Randolph Aircraft Enamels and Fast Dry engine Enamels. Qt. ...........P/N 257-QT ..............$12.00 Gal. .........P/N 257-1G ..............$46.00
A precision tool to accurately measure paint viscosity when spraying automotive and aircraft finishes. Consists of a nylon cup with a precisely sized small hole in the bottom. As paint flows through the hole, time the rate of flow. Adjust viscosity by adding thinner as required to produce recommended flow for product being used. P/N 01-25400............................$13.50
How to Order:Use these dash #s to complete Randolph color part #s: Butyrate: Qts -BQ, Gallons -BG; Example: P-8599-BG ALL mixed paints are special order and are non-returnable.
380
Leaves plastic substrates clean for coating, will not soften or distort plastic; removes contaminants such as mold, release agents, fingerprints and grease. Aerospace Plastic & Leather Prep can be used on all plastics and leather. 16 oz. Aerosol. P/N 09-03587 .....................$13.95
SEM Leather & Vinyl Repair Compound 38422 is a unique compound that successfully repairs cuts and abrasions on leather or vinyl. This product has exceptional strength, flexibility and can also be used to fill minor imperfections. Works effectively on leather and vinyl substrates to create a durable and long lasting repair. This product is packaged in an easy-to-use tube, which helps to prevent waste and is a great value for any shop! P/N 09-03578 .....................$21.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
38373 SEM SOLVE removes adhesives, wax, road tar, grease and paint overspray. 20 oz. Aersol. P/N 09-03577 .......................$9.95
SEM SOLVE
40523 SEM Low Voc Rubberized Undercoating is a paintable, fast-drying, asphalt free coating for rust proofing, sound deadening, chip resistance and corrosion protection. Less than 40% VOC. 24 oz Aersol. P/N 09-03581 .....................$11.75
38363 SEM SAND FREE softens the substrate promoting adhesion on difficult to sand areas. 16 oz. Aersol. P/N 09-03576 .....................$13.85
SEM Trim Black 39143 is the industry standard for restoring faded and peeling exterior trim parts. This paint coating offers maximum adhesion on stainless steel and chrome. 20 oz. Aersol. P/N 09-03579 .....................$11.50
SEM Vinyl Prep 38343 cleans soil, wax and grease from vinyl substrates while it softens and prepares the surface for adhesion of topcoat. Great for use with SEM flexible coatings. 16 oz. Aersol. P/N 09-03575 .....................$13.85
SEM COLOR COAT is formulated to match, restore or change color on most vinyl surfaces, flexible and rigid plastics, carpet and velour. Fade resistant and flexible, COLOR COAT is not a dye, but a permanent paint coating. 16 oz. aerosol.
Color 15003 Phanton White 15013 Landau Black 15043 Shadow Blue 15103 Super White 15143 Sandstone 15163 Presidio 15173 Camel 15183 Warm Gray 15233 Gloss Black 15243 Satin Black 15283 Pescadero Sand 15303 Graphite 15393 Medium Gray 15603 Sailcloth White 15763 Storm Gray Part No. 09-03556 09-03557 09-03558 09-03559 09-03561 09-03562 09-03563 09-03564 09-03566 09-03567 09-03568 09-03569 09-03571 09-03572 09-03573 Price $12.98 $12.95 $12.98 $12.98 $12.85 $12.98 $12.98 $12.98 $12.98 $12.98 $12.98 $12.98 $12.98 $12.98 $12.85
38338 SEM SCUFF & CLEAN prepares bumpers or panels when refinishing or blending. Its abrasive action improves adhesion of repair and refinishing materials. Pint. P/N 09-03574 .....................$18.95
SEM CLASSIC COAT uses advanced technology to provide superior adhesion and flexibility when changing or restoring the color of most leather and vinyl. CLASSIC COAT is a fade resistant coating that wont chip or peel and is available in many of todays popular OEM colors.
Color Part No. Price
The SEM AEROSPACE SURE-COAT process restores aircraft interior leathers, vinyl and plastics at a fraction of the cost of replacement. The SEM AEROSPACE SURE-COAT process (SCLA-101), cleans, repairs, and restores interiors to a like new condition without changing the aircrafts burn certification. All products have passed vertical burn testing requirements under Federal Aviation Regulations and have been shown not to add flammability to the aircraft interior surfaces. AEROSPACE SURE-COAT is a waterborne coating system that offers excellent flexibility and outstanding adhesion for a variety of aerospace applications. Sure coat dries quickly and may be brushed or sprayed to change or enhance current color while maintaining the texture and look of leather, vinyl and plastic. P/N 09-03586 .....................$54.82
17013 Midnight Black 17033 Lt. Parchment 17043 Med Graphite 17053 Med Parchment 17083 Dk Graphite 17093 Black 17103 Dark Gray 17013 Lt Gray 17123 Lt Neutral 17133 Med Dk Pewter 17163 Med Gray 17173 Shale 17203 Very Dk Pewter 17223 Taupe 17243 Ivory
09-03537 09-03538 09-03539 09-03541 09-03542 09-03543 09-03544 09-03546 09-03547 09-03548 09-03549 09-03551 09-03552 09-03553 09-03554
$13.98 $13.98 $13.98 $13.98 $13.98 $13.98 $13.98 $13.98 $13.98 $13.98 $12.95 $13.98 $13.98 $13.98 $13.98
SEM SURE-COAT is a waterborne coating system offering excellent flexibility and outstanding adhesion for a variety of interior and exterior automotive, marine, aerospace and commercial applications. SURE-COAT allows the user to change or enhance the current color while maintaining the texture and look of leather, vinyl and plastic. It will not get brittle with age nor soften or crack within normal temperature ranges. SURE-COAT Mixing system contains 9 toners and 3 clears that can be mixed to match almost any color and dries quickly when brushed or sprayed. Contains one each: 16004 SURE-COAT Cross Linker 70400 SURECOAT Dauber Bottle A16018 Black A16088 Silver A16508 Red Oxide A16518 Indo Yellow A16528 Quindo Red A16538 Thalo Blue A16548 White A16568 Thalo Green A16598 Yellow Oxide A16705 High Gloss Clear A16715 Satin Gloss Clear A16725 Low Luster Clear. Also includes: Pint labels and A70034 Fleet Color Selector P/N 09-03585 ...................$610.26
381
3M ABRASIVES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ID 7445 Grade MED Color Blue For use with 5 diameter Stikit Discs. density foam and a 45 tapered edge These lightweight, shock-resistant pads face (blue) that provides excellent disc allows quick, easy removal. Size 5 x 3/4 Part No. 09-01535
Has medium for flexibility. have a vinyl adhesion yet Price $35.50 Grade 600 360 400 320 280
A silicon carbide Wetordry abrasive product constructed on a C weight, intermediate paper backing. Can be run wet or dry.9x11 sheets. Price $1.41 $1.50 $0.89 $0.92 $0.89 Grade 240 220 150 120 100 Part No. 09-01529 09-20600 09-01532 09-20550 01-37700 Price $1.40 $0.96 $1.52 $0.99 $1.26
Use with 5 diameter Stikit Discs. Made with soft density foam for conformability. Has 1 inch wide strap for holding the pad to the operators hand. Size 5 x 1 Part No. 09-01448 Price $12.50
Constructed of durable aluminum oxide; works well for most wood species. The open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade and a special loading resistant coating makes this disc a good choice when loading is a problem. The C weight, paper backing is more durable for extended disc life and harsher sanding applications. Style # 236U 236U 236U 236U 236U 236U 236U 236U 415U 415U 415U 415U 415U 415N Grade P80 P100 P120 P150 P180 P220 P240 P320 80 100 120 180 220 320 Weight C C C C C C C C A A A A A A Size Qty. 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 100 5 x NH 125 5 x NH 125 5 x NH 125 5 x NH 250 5 x NH 250 5 x NH 250 Part No. 09-01572 09-01573 09-01574 09-01575 09-01576 09-01577 09-01578 09-01579 09-01558 09-01559 09-01560 09-01562 09-01563 09-01450 Price $34.50 $49.50 $49.50 $43.95 $30.50 $32.75 $49.50 $51.75 $33.00 $15.75 $42.75 $88.75 $31.50 $46.60
Flexible web for finishing, blending, and polishing. Conformable for access to hard-to-reach areas. Great for general use on a variety of materials. Use manually or on an in-line sander. Description 3M Clean and Finish Medium 3M Clean and Finish Fine Size 4 x 30 FT. Roll 4 x 30 FT. Roll Part No. Price 09-01500 $56.75 09-01501 $43.50
Rubber backup pads available in different degrees of hardness for varying grinding applications. Backup pad designed to support 3M Roloc abrasive discs. This pad has a -20 INT thread which allows it to be mounted directly to tools with -20 EXT threaded shaft or the included 1/4 diameter shank that fits 1/4 collet chucks or drill chucks. Description 45902 - 3 Med. Disc Pad and Shank Replacement Parts 45092 - 3 Med. Disc Pad 1/4 inch Diameter shank Part No. Price 09-02129 $17.75 Part No. Price 09-01554 $16.50 09-01557 $2.45
Most universally used in a variety of applications. Excellent starting point to clean, finish, grain, denib and defuzz. May be used by hand, with a hand pad block, or on an in-line sander. Grade ID Part No. Price VFIN 7447 09-01503 $1.15
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Grade ACRS AMED AVFN ACRS Size 1.5 1.5 1.5 2 Part No. 09-01510 09-01511 09-01512 09-01506 Price $0.76 $0.72 $1.25 $1.20 Grade Size Part No. AVFN 2 09-01505 AMED 3 09-01509 ACRS 3 09-01508 AVFN 3 09-01507 Price $1.17 $1.98 $2.35 $1.98
Tight and dense, this pad is the most aggressive and durable web. Excellent for heavy cleaning, deburring, and finishing. May be used by hand, with a hand pad block or on an in-line sander. ID 7440 Part No. 09-01504 Price $2.95 Size 2 2 3 3
High performance and durability for deburring and finishing applications. Threaded attachment system secures the wheel to the holder. Grade MED 2A MED 6A MED 2A MED 6A Part No. 09-01514 09-01516 09-01515 09-01517 Price $3.35 $4.00 $6.25 $7.25
Conformable web and fine mineral are excellent for fine finishes, light cleaning. Among our least aggressive abrasive hand pad. May be used by hand, with a hand pad block or on an in-line sander. Grade SFIN Part No. 09-01415 Price $1.15
Bristles are idea for cleaning, blending and deburring. 2.................... 09-01416............. $3.80 3.................... 09-01417............. $4.40
Brush-like bristle disc removes coarse coatings from the large, open areas of a work piece. Works on right angle tools quickly and easily with little or no pressure. Size 2 x 5/8 2 x 5/8 2 x 5/8 Grade Tapered 120 GRDE Tapered 50 GRADE Tapered 80 GRADE Part No. 09-01520 09-01518 09-01519 Price $12.25 $12.25 $11.90
382
3M ABRASIVES - ADHESIVES
Wheel is designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Ideal for use on a wide variety of utility type cut off tools. Do not use on tools without guards.
High strength, fast contact-type adhesive. Fast contact strength buildup for many decorative laminates. Only needs 1 minute of drying time. Size Part No. Price 24 oz 09-01376 $23.85
CM WP ME HA AP LG EP CS
ID
Size
Part No.
Price
01985
3x1/32x3/8
09-01521
$3.95
01994
4X1/32X3/8
09-01524
$5.30
Two-part epoxy adhesive with a 1:1 mix ratio, 25 minute work life and exhibits very high peel strength. Moderately flexible and the gray version has exceptional shear adhesion. Use to bond rubber, metal, wood, plastics, and masonry products. Size 1.7 oz 1.7 oz Color Gray Translucent Part No. 09-01403 09-01402 Price $22.75 $18.50
82238
3X1/32X1/4
09-01570
$5.50
88755
4X1/32X1/4
09-01580
$4.60
01986 5 Pack
3X1/16X3/8
09-01523
$29.25
Exhibits much higher shear and peel strengths compared to DP100 Adhesive. It has a 1:1 mix ratio, a 4 minute work life, and is slightly flexible when cured. Clear in color. 1.7 oz. package. P/N 09-01401 ..................$19.75
Two Styles Available: Cut & Polish/Unitized Wheel7A Medium grade (harder) Use to radius and deburr edges of aluminum parts. These wheels give a uniform brushed satin finish to parts and deburr quicker and easier than hand finishing. These wheels are discs of Scotch-Brite web compressed and bonded to form a rugged, dense wheel. Wheel size: 6 dia. x 1 wide x 1/2 thru hole. .............................................P/N 12-00875 ............$71.50 Light Deburring Wheel-7S Fine Grade (Softer) Light deburring 7S Fin 6 x 1 x 1. This wheel has a 1 thru hole. To fit 1/2 order P/N 12-01585. ...................................P/N 12-00948 ............$63.25 3M Flange Adapter 3 45035 1/2..............P/N 12-01585 ..............$4.25
A flexible, two-part adhesive that cures at room temperature and provides high strength bonds with good performance in shear and peel. Can be used to bond rubber, metal, wood, most plastics, and masonry products. Size 1.7 oz Color Gray Part No. 09-01375 Price $19.90
This adhesive provides tape-like bonds on many lightweight materials. It adheres in seconds, yet has an extra-long tack range that allows you to lift and reposition materials. 16 oz. Can. P/N 09-01377 .................$19.25
Mixing nozzle will perform to your requirements. With consistent air pressure for easy uniform application, the Duo-Pak cartridge will give you the flow rate needed. Fast, convenient way to simultaneously meter, mix and apply twopart adhesives and potting compounds. System features handy 3M Scotch-Weld EPX Cartridges that snap quickly into the durable, lightweight Scotch-WeldEPX applicator. A slight squeeze on the trigger advances the plunger into the cartridge. Accurate measurement and the mixing nozzle provides thorough mixing and precise placement of material. Ideal system for assembly, maintenance and in-field service. Size 50 mL 50 mL Color EPX Metal Applicator w/Plunger EPX Mixing Nozzle 9742 Part No. 09-01371 09-01372 Price $62.25 $2.25
IN EL AV TO PS BV
3M Scotch-Weld DP601 is a self-leveling, gray, rapid setting, two-component polyurethane adhesive. It is packaged as 1:1 ratio liquids in duo-pak cartridges. With the squeeze of the trigger, the components are automatically mixed and easily dispensed as a bubble-free liquid. DP601NS is the same as the DP601 except it is a non-sag, gray, rapid setting, two-component polyurethane adhesive. Description DP601 (Self-leveling) DP601NS (Non-Sag) Size 12 oz 50 ml Color Gray Gray Part No. 09-01413 09-01412 Price $27.25 $9.95
This Plunger is for the Scotch-Weld EPX Plus II Applicator. The Scotch-Weld EPX Plus II Applicator is used to Dispense 3M Scotch-Weld Adhesives in Duo-Pak Cartridges. The applicator is a low-cost portable, self contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied. P/N 09-01380 ...................$68.50 50 mL Mixing Nozzle 9742 ................. P/N 09-01372 .....................$2.25
Applicator nozzle designed for both the 200 mL and 400 mL applicators. P/N 09-01408 ..............................$2.95
383
3M ADHESIVES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
UPC 1300L 1300L 1300L 1300 1300 1300 1300 A flexible, two part, room temperature curing epoxy with high peel and shear strength. Scotch-Weld epoxy adhesive 2216 B/A is identical to 3M ScotchWeld Epoxy Adhesive EC-2216 B/A in chemical composition. Scotch-Weld epoxy adhesive EC-2216 B/A has been labeled, packaged, tested, and certified for aircraft and aerospace applications. Scotch-Weld epoxy adhesive 2216 B/A may be used for aircraft and aerospace applications if proper Certificates of Test have been issued and material meets all aircraft manufacturers specification requirements. 24 month shelf life. SIZE COLOR 2 oz. Gray Pint Gray Quart Gray DESCRIPTION Adhesive 2216 B/A Adhesive 2216 B/A Adhesive 2216 B/A PART NO. 02-00045 02-00113 02-00114 PRICE $43.80 $139.50 $186.95
A brushable, neutral-colored contact adhesive for bonding many decorative laminates, aluminum, steel, plywood, panels, wood and wood veneer, masonry, rubber, canvas and other porous and non-porous materials to each other or to themselves. P/N 09-01364 ................... $26.85
One-part, high strength, very fast setting adhesive cures at room temperature. Adheres to difficult to bond substrates such as EPDM rubber, aluminum, and flexible vinyl. Comes in a 1 oz. Bottle. Clear. P/N 09-01368 ..................$27.25
This fast drying adhesive develops strength very quickly. It has excellent heat resistance; temperature performance is from -5 to 300F. Meets specification requirements of MIL-A-1154C. Bonds neoprene, reclaim, SB-R, and butyl rubber to metal, wood, most plastics, and many other products. 5oz. Tube. reddish Brown in Color. P/N 09-01361 ................. $15.75
This instant adhesive has a fast set time of 5 to 40 seconds. Excellent adhesion on metal, plastic and rubber. Bonds resist shock and impacts. A cyanoacrylate adhesive. Comes in a 1 oz. bottle. P/N 09-01366 ..................$27.75
It is ideal for use with all 3M Cyanoacrylate Adhesives for a broad range of industrial and electronic applications. It is also ideal for use with CA-5, CA-9, or CA-50 Gel for many wire tacking and coil terminating applications. P/N 09-01407 ................. $10.75
A high performance contact adhesive that provides a long bonding range and excellent initial strength. 1357 Grey/OLIV..................................... P/N 09-01362.................$93.75 1357 Neutral 1G .................................... P/N 09-01373.................$85.95
Super adhesive for door seals and other applications. Many customers have had difficulty finding EC1300L adhesive (or equivalent). Search no more! This super adhesive has exceptional bonding strength, is fast drying, and firmly bonds the seals making your installation easier! They recommend you order the adhesive when you order your new seals. One tube is enough for installing all the seals on your aircraft when applied in accordance with the seal installation instructions. A free acid brush is included with each order. P/N 09-27200 ................... $6.75
A clear, non-staining high strength adhesive with exceptional resistance to plasticizer migration. Develops tack very rapidly. Can be used to bond many flexible, rigid and extruded vinyls to metal and many other surfaces. Comes in a 1 qt. can. P/N 09-01365 ................. $51.25
Specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas. 1qt. bottles. P/N 09-01451 ..................$24.50
Lower viscosity, sprayable version of Scotch-Weld Neoprene High Performance Rubber and Gasket Adhesive 1300. Has excellent adhesion to metal, baked enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl rubber. not for EPDM rubber. Size Color Part No. Price 1 qt 09-27220 $41.50 Gallon. 09-01712 $122.95 5 Gallon 09-01713 $447.95 YELLOW 5 oz. 09-01708 $15.50 Quart 09-01709 $47.75 Gallon 09-01710 $131.95 5 Gallon 09-01711 $463.95
The 3 inch buffing pad is designed to get you into tight areas not accessible with a conventional polisher. Pads are hook-and-loop backed. Pads are sold each. P/N 09-01452............................ $4.10
384
3M PRODUCTS-CLEANERS
3M PERFECT-IT PAINT FINISHING SYSTEM
Improve buffing and polishing productivity and finish faster with more consistent results. Includes the following: 3M Perfect-It Rubbing Compound - P/N 09-02999 3M Perfect-It Low-linting Wool Compound Pad - P/N 09-03001 3M Perfect-It Machine Polish - P/N 09-03004 3M Perfect-It Foam Polishing Pad - P/N 09-03005 3M PerfectIt Ultrafine Machine Polish - P/N 09-03006 3M Perfect-It Ultrafine Foam Polishing Pad - P/N 09-03007. Items are also sold separately. P/N 09-03010 ............... $198.00 Fast-acting liquid hardening agent designed to be used with 3M Sprayable Polyester Filler (PN05825 or 05856), and/or 3M Fiberglass Resin (PN05833 or 05834). 22oz. tube P/N 09-01434 ................... $3.90
3M LIQUID HARDENER
CM WP ME HA AP LG EP
Ultra high gloss paste wax with exceptional durability for use on automotive paints. Shines and protects new and like new pint finishes, producing a deep high gloss, lustrous, durable, wet look finish. P/N 09-01443............................$17.50 Enables 3M Superbuff Compound Pad users to use the 3M Perfect-It Foam Polishing Pad without having to remove the 3M Superbuff Adaptor 05710 from the shaft of the polisher. Fits all standard 5/8 in shaft slow-speed polishers. 7 x 3/4. P/N 09-01426 ..$44.75
Contains chopped fiberglass. Repairs holes, cracks and tears in fiberglass. Repairs holes in metal. Smooth spreading. Waterproof. Can be used with Fiberglass Mat (PN05837) or Fiberglass Cloth (PN05838) to reinforce large repair areas. 1 Gal. Can ....................P/N 09-01431 .........................$44.95
Designed for spreading body and fiberglass fillers, finishing putties, and resins. Sharp edge. Flexible. Durable. Easy to clean. Cured fillers pops off easily. Available in 4 or Assortment (1 each 4, 5 and 6). 4 .......................P/N 09-01435 ......................$0.76 Assortment ........P/N 09-01436 ......................$4.55
3M SPREADERS
Effectively refines scratches in business jet cabinet clear coats using polyesters and polyurethanes. Also used for refining scratches on painted aircraft surfaces created during the defect removal process, as well as removing paint oxidation on painted aircraft surfaces. Can be used on aircraft cabinetry or painted surfaces. * No Silicone * Non-corrosive ...........P/N 09-02173 ............ $19.75 SuperBuff Buffing pad 05703 ....................P/N 09-02174 ............ $27.90
Provides easy clean up of most types of adhesives. Quickly removes waxes, road tars, grease, oil and similar materials. Will not harm paint, vinyl or fabrics when properly used. 24 oz. Can. Pale yellow in color. P/N 09-01379 ..................$25.25
A liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents. 24 oz. Can. Clear in color. P/N 09-01393 ...............$25.75
CS IN
Portable masker designed to dispense Overspray Protective Sheeting (PN06727). Can be used horizontally, vertically or wall mounted. Spring loaded end frame designed for easy loading of Overspray Protective Sheeting. Paper is not included with masker. P/N 09-01441 ............... $102.50 Designed to be used with Fiberglass Cloth (PN05838) and/or Fiberglass Mat (PN05833). Waterproof when cured. Liquid Hardener (PN0536) included. For metal and fiberglass. Thick formulation resists sags or runs.1 Qt. P/N 09-01433 .................$23.85
Multi-purpose product that is effective as a demoisturant - displaces moisture and dries out electrical apparatus. 24. oz. Can. Light Amber in color. P/N 09-01370 .............................. $16.25
3M 5-WAY PENETRANT
EL AV
3M FIBERGLASS RESINS
Cures tack-free in 15-20 minutes reduces sandpaper loading. Creamy texture. Smooth spreading. Easy smoothing. Vacuum processed to minimize pinholes. 1 Qt..........................P/N 09-01428 ................. $10.25 1 Gal. .......................P/N 09-01429 ................. $19.50
Designed to clean carpets and upholstery. Releases both oiland water-based soils from carpet and upholstery. Aerosol foam is sprayed directly on spot with minimum of overspray. Requires no rinsing. Wipe or blot area with a clean, absorbent cloth. P/N 09-01722 ..............................$9.85
TO PS
Tack-Free and Stain Resistant. Two component, selfleveling putty designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas or other imperfections. Available in quart and handy squeeze dispenser no mess. Fills pinholes in body fillers and small imperfections in metal and fiberglass. Cures tack-free in 30 minutes. Flowable, brushable. Easiest sanding 3M Polyester Putty. Minimizes staining that can occur with basecoat/clearcoat systems over body filler. Vacuum processed to minimize pinholes. Excellent adhesion to galvanized, aluminum and thoroughly cured and sanded factoryapplied paint surfaces. P/N 09-01432 ................. $31.75
Ideally suited for stainless steel, chrome, laminated plastics and aluminum surfaces. With a high-gloss formula, it wipes clean with no streaks or buildup, resists fingerprints and masks surface blemishes. Pleasant lime fragrance. Contains no petroleum distillates. P/N 09-01721 ............................$12.25
BV
385
Its as simple as pressing together and pulling apart. When your product calls for thousands of easy openings and closings, 3M Scotchmate Reclosable Fasteners pull through for your. Tiny, stiff hooks mesh with pliable loops for quick secure fastening. In addition, provide a solution as strong as you need. No adhesive, nylon and sewable hook so can be easily attached to many substrates. Sold by the foot. Velcro Fastening Tape 2 Black ...................09-22223 .................. $2.35 Hook 2 SJ3402............................................09-01388 .................. $1.36 Loop 2 SJ3401 ............................................09-01387 .................. $1.07
General purpose ear muffs. Wide, forked headband and multi-position large ear cup create a comfortable, secure fit. Economical, lightweight design. Replaceable, soft sealing cushions. Noise Reduction Rating: 23dB*. P/N 09-01494 ..................$13.25
Smooth dirt resistant surface, tapered design to fit the ear canal, provide added comfort and hygiene. Hypo-allergenic material. Each box contains 200 pairs, and each package is easy to dispense. Noise Reduction Rating: 29dB*. P/N 09-01493 ....................$0.25
Flame resistant, rubber adhesive, nylon, woven loop reclosable fastener and meets F.A.R. 25.853 paragraph (a)(1)(i) 60 second vertical burn test. Mates with SJ3519FR, black. This flame resistant product is coated with a unique flame resistant synthetic rubber based adhesive. High temperature performance. Bonds wells to paper and cardboard, paint, bare and painted metal, glass, sealed wood and many plastics. Hook 2 x 50 yds. ...................... P/N 09-02598 .........................$189.95 Loop 2 x 50 yds........................ P/N 09-02597 .........................$189.95
Flame Retardant Sealing Tape 398FRP is a glass cloth tape with an acrylic adhesive for many applications requiring high adhesion, an abrasion-resistant backing and flame retardant properties. The tape meets flame retardancy requirements of F.A.R. 2x36 yards .......... P/N 09-01728 ................$42.75 3x36 yards .......... P/N 09-02135 ................$61.50
A durable, mineral coated, non-slip fabric for wing walks. Waterproof, weatherproof and unaffected by vibrations, heat, cold, gasoline or oil. Assures safe footing. Pressure-sensitive backing should have additional coating of 3M 1300L (located on pg 388) to assure adhesion for aircraft applications.
A flame retardant, very conformable, double-sided, pressure-sensitve, closed-cell acrylic foam tape with a PE film liner. Bonds high, medium and medium/ low surface energy substrates. Provides handling convenience, cushioning, damping, and impact resistance. 40 mil thick. Black color. 1 X 3 .......................P/N 09-02998 ................. $19.99 3 X 3 .......................P/N 09-03054 ................. $29.99
COMFORMABLE TREADS Part No. 09-01485 09-01486 GENERAL PURPOSE Description Safety Walk 24 INCH W Safety Walk 610 2 W Safety Walk 610 4 W Safety Walk 610 12 W Part No. 09-31675 09-01482 09-01483 09-32250 Price $9.95 $1.80 $1.82 $4.95 Price $2.35 $2.35
3M 9377 Tape has a differential adhesive system with a high-tack acrylic that bonds to the top-layer substrate and a rubber-based adhesive system that attaches to the flooring material. One side is black and attaches to the flooring material with an acrylic-based adhesive. The white side of the tape is a rubber-based adhesive that provides a bond to the floor surface. Firm application pressure helps develop better adhesive contact and improve bond strength. The bond strength will build over time reaching maximum strength at 72 hours. FAR-25-.853 P/N 09-02133 ................. $35.85
A premium grade vinyl electrical insulating tape, its aggressive adhesive and elastic backing ensure easy, water-resistant conformation to irregular surfaces in low temperatures, yet will not ooze or melt in high temperatures. 3/4 wide X 33 Long. P/N 09-01465 ................... $5.85
386
3M TAPE - MASKING
This 3M tape is particularly suitable for pin striping, multicolor and other custom painting applications. It is a thin, conformable green polypropylene film tape with a special finish that resists paint runoff. The adhesive adheres instantly and offers good holding power, resists lifting and curling. Stretchable and easy to handle. Provides an extremely fine color-line separation for decorative painting of aircraft. Scotch No. 218. Width 1/8 1/4 3/8 1/2 3/4 1 Length 60 Yards 60 Yards 60 Yards 60 Yards 60 Yards 60 Yards Part No. 09-20200 09-20300 09-20350 09-20400 09-20500 09-01348 Price $12.90 $9.65 $18.90 $10.95 $13.95 $17.75
A medium-firm, acrylic, pressure sensitive adhesive that featuring an excellent balance of good initial adhesion (quick stick) and good shear holding power. It is ideal for bonding together a wide variety and dissimilar materials such as metals, glass, wood, paints, and many plastics. Size Color Part No. Price 2x36yds White 09-01343 $39.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Polyethylene coated cloth with rubber adhesive for applications requiring good strength and moisture resistance. Applications include holding insulation materials P/N 09-01727 ............................$29.25
Dead-soft aluminum foil tape. Applications include masking of sensitive components to protect from damage during aircraft paint stripping. In white goods appliances, tape provides an excellent moisture barrier, helps reflect and dissipate heat. Size 1.5 x 60 Yards 1 x 60 Yards 2 x 60 Yards 3 x 60 Yards 3/4 x 60 Yards P/N 09-01382 09-01381 09-01383 09-01385 09-01386 Price $39.85 $27.85 $54.75 $77.50 $21.75
A high performance paper masking tape to be used in the medium temperature paint bake operation. A smooth crepe paper tape that is treated with a heat and solvent resistant coating. Part No. 09-01340 09-01331 Price $5.50 $8.25
15.0 mil, white closed cell acrylic foam carrier with film liner and all purpose adhesive. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C. 1 in width, 72 Yards per roll. P/N 09-01397 ................$161.95
5903 is a poly tape comprised of heavy duty polyethylene film and synthetic rubber adhesive. It is UV weather resistant and removes cleanly for up to a month with little or no adhesive residue on most opaque surfaces without deteriorating or fading. Used for window and door masking, outdoor holding and protecting surfaces including stucco, concrete, brick, and a variety of construction surfaces where removability is important. P/N 09-02136 .....................$8.75
45.0 mil thick, white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C. Size 1x36yds 2x36yds Color White White Part No. 09-01360 09-01389 Price $103.95 $198.95
Tape guide pin molded into the M3000 KML frame. Guide pin aids tracking of the masking tape onto masking paper while dispensing. Tack-Down Tape Dispenser (PN06789) allows easy on-off mounting. Provides fingertip access to an extra roll of masking tape. Includes 12 cut off blade. Making film is not included with dispenser. P/N 09-01442 ..................$58.75
3M Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications Color Blue Black Yellow White Size 2 x 36 Yards 2 x 36 Yards 1 x 36 Yards 1 x 36 Yards Part No. 09-01344 09-02179 09-01338 09-02076 Price $17.90 $30.75 $10.95 $16.50
3M VINYL TAPE
Size 3/4 1
Ideal for long-term masking projects when tape must be left on for up to a week. Removes cleanly and easily for up to seven days without leaving adhesive residue. Size Part No. Price Part No. Price 1-1/2 09-01422 $6.75 09-01420 $3.45 2 09-01423 $8.50 09-01421 $4.50
Strong, flexible and pliable. Formulated to resist penetrations of solvents, lacquers or enamels. Comes in 1000 rolls. Description Part No. Price Gray Masking Paper 12 09-01353 $54.75 Gray Masking Paper 18 09-01354 $73.70 Gray Masking Paper 24 09-01355 $79.50 Gray Masking Paper 36 09-01356 $132.95
387
3M PRODUCTS
3M SCOTCH-WELD THREADLOCKER
CM WP ME
THREADLOCKER 3493 PURPLE - For fasteners less then 5/16. Low removal torquer 50 mL........... P/N 09-01628 ...........$31.95
3M PPS Cup and Collar, 16023 Large hard cup that supports and holds the PPS large flexible liner, part number 16024. If filled to the top, this cup will hold 32 fl oz. P/N 09-01717 .................. $18.95
Hard cup that supports and holds the PPS mini flexible liner, part number 16114. If filled to the top, this cup will hold 6 fl oz.P/N 09-01720 .................................... $25.50
3M NOVEC
HA AP LG EP CS IN EL AV TO PS BV
- Effectively removes oils, greases adn handling soils from electric motors, electrical equipment, precision devices and other electromechanical or sensitive devices. Based on proprietary 3M solvent technology; it is non-flammable, non-ozone depleting and contains no HCFCs, HFCs, nPB or HAPs. 12oz can, 6 can per case. PN 09-01703 ............................................. $18.90
Small, hard cup that supports and holds the PPS small flexible liner, part number 16000. P/N 09-01715 .................. $34.90
Adaptor converts DeVilbiss TGHV 530 Siphon Feed and all Full Size Siphon Feed Guns with North American 3/8 Female-18 Thread NPS guns for use with 3M Paint Preparation System. P/N 09-01716......................$21.75
With the 3M Headlight Lens Restoration System, you will use a 1200-1600 rpm drill equipped with a backup pad and sanding discs to remove the yellowed layer from the headlight lens surface. A higher rpm drill could generate excessive heat and can cause damage to the headlight lens that is difficult to remove. A lower rpm drill does not work efficiently for this process. Two sanding steps will follow to refine or reduce the sand scratches that are made when removing the yellowed layer. Finally, 3M Headlight Lens Polish and a foam pad will remove the fine scratches and put the final clarity on the headlight lens. Kit Includes: 1 - Disc Pad Holder 1 - 3M Soft Interface Pad 6 - 3M Sanding Discs 4 - 3M Finishing Discs 1 - 3M Trizact Disc 1 - 3M Headlight Lens Polish, 1oz 1 Buffing Pad 1 - Step by Step Directions PN 09-02109 .............$17.25
3M premium fillers with adhesion promoters, offer the very best in all-around performance. Our premium fillers adhere to virtually any surface including wood, metal, aluminum, galvanized steel, fiberglass and concrete. They are also non-staining, non-shrinking, creamy and are great for building plugs, patterns, molds, prototypes and general repair to composite parts. 3M premium fillers are easy to sand and are manufactured with only the highest quality ingredients. Description Size Part No. Price Marson Platinum Body Filler Quart 01-01090 $15.85 Marson Platinum Body Filler Gallon 01-01091 $36.75
3M BODY FILLERS
3Ms line of reinforced filler products offers users a unique and flexible array of repair solutions. Each product is reinforced with short fiberglass strands, long fiberglass strands or milled fiberglass. These reinforced fillers are significantly stronger than regular fillers and are waterproof. Great for repairing fiberglass and rust holes in metal. Description Size Part No. Price Dynatron Ultra-Glass Reinforced Filler Quart 01-01097 $13.50 Dynatron Ultra-Glass Reinforced Filler Gallon 01-01098 $30.50 Dynatron Dyna-Glass Reinforced Filler Quart 01-01073 $13.25 Dynatron Dyna-Hair Reinforced Filler Gallon 01-01103 $39.50
REINFORCED FILLERS
3M standard fillers are the economical choice for gap filling, fairing, smoothing and general repair. They are also great for plug, pattern and tooling departments for creating and building shapes, curves and intricate elements to molds and patterns. They are easy to mix, apply, and sand, and have a quick cure time. Great for quick repairs to fiberglass, wood, metal concrete and aluminum. Description Size Part No. Price Dynatron Ultralite Advanced Body Filler Quart 01-01084 $9.50 Dynatron Dynalite Body Filler Quart 01-01072 $10.50 Dynatron Dynalite Body Filler Gallon 01-00368 $20.75
3M finishing putties have excellent adhesion to wood, metal, aluminum, e-coat, galvanized metal, fiberglass, SMC, epoxy, concrete and primer/paint. These finishing putties are ideal for repairing or filling smaller dents, scratches, gouges and voids. Each product is non-shrinking, non-staining, cures quickly and sands exceptionally well. Description Part No. Price Dynatron Dyna Maxx Finishing Putty - Quart 01-01086 $21.75 Dynatron Dyna Maxx Finishing Putty - 1/2 Gallon 01-01087 $41.50 Dynatron Putty Cote Advanced Body Filler 01-01089 $28.50 1/2 Gallon
388
3M SPRAYERS POLISHERS
Introducing the 3M Accuspray System, the equivalent of having a brand new primer spray gun for a fraction of the cost. Provides the equivalent of a brand new primer spray gun for a fraction of the cost. Kit contains 1 spray gun, 3 atomizing heads and 1 air flow control valve. The innovative replaceable atomizing head allows for the following benefits: Reduces Primer Consumption: minimizes overspray Boosts Productivity: lowers primer spraying time, decreases primer sanding time, reduces clean-up Maximizes Benefits of the 3M PPS System: reduces gun cleaning time, uses less solvent for clean up, decreases hazardous disposal cost, improves productivity and profitability HG09 Gun ..................................P/N 09-03016 ..........................$156.95 Head Refill Kit .............................P/N 09-03060 ............................$17.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Convenient introductory pack contains a variety of grades of Roloc Bristle Discs 2-inch diameter x 5/8-inch trim with a disc pad holder for an optimized finish. 2 Disc ..........................P/N 09-03014 ........$72.50 3 Disc ..........................P/N 09-03015 ......$100.95
ACCESSORIES
Description 3m Perfect-It Rubbing Compund 3m Perfect-It Low-linting Wool Compound Pad 3m Perfect-It Foam Compounding Pad 3m Perfect-It Wool Compounding Pad 3m Perfect-It Machine Polish 3m Perfect-It Foam Polishing Pad 3m Perfect-It Ultrafine Machine Polish 3m Perfect-It Ultrafine Foam Polishing Pad 3M Quick Connect Adaptor Part No. 09-02999 09-03001 09-03002 09-03003 09-03004 09-03005 09-03006 09-03007 09-03008 Price $41.75 $28.75 $23.50 $26.00 $36.85 $24.75 $47.85 $26.75 $39.75
This brown, 5.3 mil (0.134 mm) glass cloth tape (5451) impregnated with PTFE and silicone adhesive. It is a heat seal tape. Provides a high temperature release surface for protection and insulation such as the bar underneath where the hot wire seals plastic film. The reinforcement provided by the woven glass cloth adds tensile strength and tear resistance. Low Coefficient of Friction: Self-lubricating nature of PTFE film tape can help improve the processability of many web materials. Excellent Heat Resistance: High temperature PTFE glass cloth tape provides long lasting performance on many heat sealing machines. Anti-Stick/Release: Release nature of PTFE film tape facilitates clean up of hot plastic extrusion coating by not allowing plastic build-up on rollers. Chemical Resistance: PTFE film tape provides chemical barrier for harsh design environments. Conformability: PTFE film tapes hug rollers for easy application and effective service. ................................................P/N 09-03011 ......$121.95 3M PTFE Extruded Film Tape 5491 is PTFE extruded film with silicone adhesive, provides an exceptionally slick surface when applied and resists curling during unwind. Chemical resistant surface for sealing and masking. Extruded, calendered film tapes that resist curling during unwind and provide an exceptionally smooth surface when applied. Extruded PTFE film tapes lie flatter than typical skived PTFE film tapes. Thicker backing helps extend the service life, compared to thinner versions, when subjected to abrasion or wear. Provides excellent chemical resistance except to organic solvents. Note: The silicone adhesive will be attacked by commercial organic solvents and is not recommended for applications requiring organic resistance. ......P/N 09-03012 ......$149.95
3M finishing glazes are the right choice when contouring and finishing surfaces or repairing minor surface imperfections prior to painting. Each product is self-leveling and easy to apply and sand. They will not stain/bleed through paint and adhere to most surfaces, including primed and painted surfaces. Description Size Part No. Price Dynatron Dyna Maxx 24fl. oz Tube 01-01094 $26.85 Finishing Glaze Dynatron Xtra Glaze 24fl. oz Tube 01-01095 $18.50 Finishing Glaze Dynatron Dyna-Glaze 24fl. oz Tube 01-01096 $23.50 Finishing Glaze A special, flexible spreading edge makes precise application of body fillers, putties and glazes a breeze. Cured body filler will easily pop off the spreader, allowing it to be reused. Description Color Size Part No. Price Dynatron Spreader Yellow 3 x 4 01-01105 $0.40
3M FINISHING GLAZES
3M SPREADERS
Clean, wax-free surface for mixing body filler. Cured body filler can be easily removed, allowing repeat uses or use the disposable paper board that offers a non-porous, wax-free surface and easy disposal. 3M Paint Buster Hand Cleaner is a non-toxic and non-caustic creamtype hand cleaner that removes enamel and urethane paints, varnish, lacquer, putties, and adhesives. Superior performance without the use of skin damaging solvents. Almost no odor, non runny, easy-to-squeeze tube. 9.75 oz Tube.........................................P/N 09-03018 ........$19.50 Description Dynatron Mixing Board Marson Disposable Paper Mixing Board Size 12 x 11.5 Part No. Price 01-01107 $3.75
3M MIXING BOARDS
3M Tartan Box Sealing Hand Dispenser is an economical, easy to use box sealing tape dispenser. It applies 3 inch (72 mm) box sealing tape. P/N 09-03019 ............................$25.50
3Ms Fiberglass Resin and Resin Kits use the exact same highstrength polyester resin that is used to manufacture high performance watercrafts, snowmobiles, bathtubs and showers. Polyester resins can be used alone or in conjunction with fiberglass mat, cloth or tape to create waterproof repairs to wood, metal, concrete, stainless steel, aluminum and fiberglass. Great for repairing large rust holes in metal and large fiberglass areas where lamination must be rebuilt. Compatible with all paints, including gel coat and marine paints. Quart. P/N 01-01104 ....................... $37.25
3M FIBERGLASS RESIN/KITS
389
MEGUIARS PRODUCTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SoftBuff foam pads are safer than wool pads because they will not leave scratches or buffer swirl marks. When used to apply Meguiars cleaners, polishes & waxes, these unique, fiber-free foam pads add incredible gloss and depth of color to all fiberglass & painted finishes. Turn dull, oxidized wheels and metal stunningly bright in just minutes! Meguiars proprietary formula cuts quickly to remove oxidation, but without scratching. Gentle polishing oils finish the surface for blindingly bright shine. Formulated to work quickly with Meguiars DynaCone wheel polishing tool or by hand. Not for use with painted or clear-coated wheels. Quantity: 8 ounces. P/N 09-03439 ..............................$8.00
For superior UV protection and shine on rubber, vinyl and plastic that lasts weeks, look no further than Meguiars Ultimate Protectant. Utilizing break-through UV clearcoat technology, Ultimate Protectant offers superior UV protection with shine that significantly outlasts conventional products, creating a rich shine and darkness on interior surfaces, while bringing new life to exterior trim, moldings and tires. Quantity: 16 ounces. P/N 09-03437 ..............................$9.00
PLASTIC CLEANER (NO. 17) - Safely removes fine hairline scratches and grime from clear plastic windows and windshields, acrylic and polycarbonate surfaces. Follow with an application of Plastic Polish (No. 10) to restore perfect clarity. 8 Oz ............. P/N 09-23500........... $7.75
Makes trim and plastic look like new, with extended durability that lasts for weeks! Restore new life to all exterior plastic, vinyl and rubber trim such as bumpers, moldings, door handles, rearview mirror housings and windshield cowlings. Utilizing breakthrough UV clearcoat technology, Meguiars Ultimate Black significantly outlasts conventional protectants and trim-care products. This durable formula dries almost instantly and, once cured, will not streak when treated surfaces get wet. Quantity: 12 ounces. P/N 09-03442 ..............................$8.00
FINAL INSPECTION (NO. 34) - Mists on and wipes off to remove fresh contaminants and maintain a showroom shine... anywhere, anytime. High lubricity formula removes dust, fingerprints, contaminants and fine scratches. Contains optical brighteners for a high gloss shine. It is paintable, safe for use in a paint shop environment and safe on all paint finishes, including clear coats. 16 Oz. .......... P/N 09-00446 .........$6.95 1 Gal. ........... P/N 09-00445 .......$31.75 VINYL & RUBBER CLEANER/CONDITIONER (NO. 40) - Gives a clean, natural looking luster to rubber and vinyl surfaces. Cleans the surface while restoring its original color. Prevents fading, cracking & drying. Avoids typical synthetic shine of conventional protectants. Contains UV protectants to extend life of vinyl & rubber. Great for use on tires, rubber trim, under hood detailing. Perfect for vinyl surfaces, including dashboards, door panels, vinyl tops and interiors. 16 Oz. .......... P/N 09-23450 .........$9.90 1 Gal. ........... P/N 09-23460 .......$29.50 POLYMER SEALANT (M-20) - Polymer Sealant outshines any other wax or polymer product. It has a unique blend of polymers, silicones and imported waxes which create a brilliant high gloss finish that outlasts all other waxes. Polymer Sealant is safe and effective on all paint finishes, including clear coats. 16 oz...... P/N 09-00764 ....$17.50 64 oz...... P/N 09-00185 ....$39.00 W-1000 8 & W-5500 5-1/2 FINESSE POLISHING PADS - (with convenient screw-on backing plate) Match
Whether youre a seasoned professional or a weekend warrior who wants show quality, swirl-free results, this is the tool for you. Meguiars Dual Action Polisher greatly reduces the amount of time it takes to apply paint cleaners, polishes and protection products and produces results far superior to applying these products by hand. And because of its dual action - rotation and orbit, you never have to worry about burning the paint. *G110 includes (polisher, "D" handle, custom hard case, W67DA backing plate, wrench, manual) P/N 09-02358 ........ $206.95
up with any rotary buffing tool. Both multipurpose pads produce a swirl-free, high gloss finish with added depth of color and reflection. W-1000 ........ P/N 09-23510 .... $13.50 ea
W-7000 8 CUTTING PAD - Offers aggressive cleaning ability without leaving swirl marks, scratches or other blemishes. Its quick-change anchor-loop backing matches up with all popular types of hook and loop buffer backing plates. P/N 09-23470 ...... $14.00ea W-9000 8 FINISHING PAD - The finest finishing tool to create the ultimate high gloss, swirl-free finish! Its quickchange anchor-loop backing matches up with all popular types of hook and loop buffer backing plates. P/N 09-23480 ...... $13.75ea W-65 6-1/2 PROFESSIONAL BACKING PLATE The perfect partner to all SoftBuff foam buffing pads with quick-change anchor loop backing. P/N 09-23490 ...... $18.75ea
W7207 - SOFT BUFF 2.0 FOAM CUTTING PAD - New foam technology cuts through moderate surface defects with fewer swirls. 7" pad size reduces chatter resulting in easy buffing. Hightech laminate provides durability and is machine washable. Recessed backing for easy centering. P/N 09-02359 .............................. $14.75 W8207 - SOFT BUFF 2.0 FOAM POLISHING PAD - Eliminates minor surface defects while restoring gloss. 7 pad combined with new technology provide a smooth buffing experience. Hightech laminate provides durability and is machine washable. Recessed backing for easy centering. P/N 09-02360 ...................$12.50 W9207 - SOFT BUFF 2.0 FOAM FINISHING PAD - All new soft foam technology removes light swirls and creates a luxurious high gloss finish. Smooth buffing experience with minimal fatigue. High-tech laminate provides durability and is machine washable. Recessed backing for easy centering P/N 09-02361 ......... $11.75
390
MEGUIARS PRODUCTS
GOLD CLASS CAR WASH SHAMPOO & CONDITIONER Meguiars Gold Class Car Wash Shampoo & Conditioner is a rich and luxurious product designed to both wash and condition paint in one easy step. The premium formula gently foams away tough dirt, road grime and contaminants without compromising wax protection. Ultra rich paint conditioners clear away debris to reveal color and clarity, leaving paint looking radiant. 16oz.. ........... P/N 09-02330 .........$8.50 64oz. ............ P/N 09-02331 .........$8.25 1 Gal ............ P/N 09-02332 .......$15.25 GOLD CLASS WAX - Elegant, timeless, premium...Since its introduction, Meguiars Gold Class Liquid Wax has inspired automotive enthusiasts worldwide to pamper, condition and protect their treasured investments. Our unique and proprietary blend of conditioners nourish and enrich paint to create clear, deep reflections and brilliant shine. Carnauba and polymer protecting agents reflect damaging UV rays, remove fine swirls, and create strong, long-lasting protection to preserve your finish. Liquid ........... P/N 09-02333 .......$11.50 Paste............ P/N 09-02334 .......$14.75
MEGUIARS CLASSIC
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
GOLD CLASS RICH LEATHER LOTION, SPRAY & WIPES - Meguiars Pamper and protect your leather in one easy
step with Meguiars improved Gold Class Rich Leather Cleaner & Conditioner Lotion, Spray and Wipes. The enhanced, premium blend of moisturizers and nutrients now with aloe for improved conditioning - quickly absorbs into leather for a natural, nongreasy finish. The convenient spray format is great for large areas or when working on perforated leather. The wipes feature 25 thick, textured wipes saturated with our enhanced, premium blend of moisturizers and nutrients deeply nourish fine leather. Each contains advanced sun-blocking agents and UV sunscreens to help defend against premature wear and fading. Lotion ........... P/N 09-02346 .........$7.50 Spray ........... P/N 09-02316 .........$8.90 Wipes ........... P/N 09-02317 .........$6.75
GOLD CLASS TRIM DETAILER - Gold Class Trim Detailer features innovative technology pioneered by Meguiars to instantly restore color and richness to faded and discolored trim and molding. Trim is protected so well that the like new appearance lasts for weeks, not days. Trim Detailer also helps to remove unwanted contaminants and wax residue. 10oz. ............ P/N 09-02336 .........$3.75
MEGUIARS GOLD CLASS ALL PURPOSE CLEANING WIPES - Meguiars combines its strongest cleaning and degreasing
formulas in a disposable wipe. Designed for multi-surface use including vinyl, metal, rubber, chrome, plastics & fabrics, Meguiars Gold Class wipes are environmentally safe, nonabrasive and non-toxic. Packaged 25 to a container, the 7x 9 wipes store easily in gloveboxes, trunks or bulkheads. They are powerful enough to clean road grime from wheels and engines, or salt spray from fiberglass hulls, yet safe on hands. P/N 09-01651 ............ $5.95
NXT GENERATION TECH WAX 2.0 - NXT Generation Tech Wax 2.0 is a scientific breakthrough that introduces a new dimension of gloss and protection. This improved formula produces unbelievably deep, vibrant color and a dramatically clear wet-look. New Hydrophobic Polymer Technology provides relentless water beading and protection against oxidation, corrosion, UV rays and surface degradation. Hydrophobic means water-fearing and this new breakthrough technology builds such incredible protection and surface tension that water beads up and just glides off your paint finish, wash after wash! Liquid............ P/N 09-02328 .......$16.75 Paste ............ P/N 09-02329 .......$15.50
391
MEGUIARS PRODUCTS
MEGUIARS CLASSIC MEGUIARS ACCESSORIES
WATER MAGNET MICROFIBER DRYING TOWEL Meguiars ultra plush Water Magnet reduces drying time with less wring-outs by absorbing up to two times the water of traditional terry towels. The extra large 22 x 30 waffle texture wrings out easily and leaves a spot-free finish. X2000 Single pack P/N 09-02351 ..............................$7.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SCRATCHX 2.0 - Keep ScratchX 2.0 close at hand for quick removal of isolated paint scratches or blemishes whenever they occur. Competitive products either hide the blemish or scratch the finish. Meguiars exclusive microabrasive system enables ScratchX 2.0 to remove paint blemishes fast while restoring brilliant high gloss. The new and improved formula can be applied by hand or with a DA. P/N 09-00304 ..............................$8.85
SOFT BUFF TERRY TOWELS - Meguiars Soft Buff Terry Towels are thick and plush to provide superior absorbency and a swirl-free finish. The towels are pre-washed for instant absorbency and lint-free performance. P/N 09-02352 ..............................$7.95
PLASTX CLEAR PLASTIC CLEANER & POLISH - This easyto-use, rich gel formula quickly restores optical clarity to both rigid and flexible clear plastics. Cutting-edge advancements in Meguiars exclusive Microscopic Diminishing Abrasive Technology (MDAT) remove light oxidation, chemical degradation, surface contamination, stains and light surface scratches with ease. Special highly water resistant polymers provide long lasting durable protection to keep your clear plastics clear and beautiful longer. We recommend applying PlastX with a High Tech Applicator Pad or Ultra Plush Super Terry and using an Ultra Plush Super Terry or Supreme Shine Microfiber for the final wipe-off. P/N 09-02324 ..............................$7.35
MICROFIBER WASH MITT - Meguiars extra thick Microfiber Wash Mitt is the ultimate choice for show car perfect finishes. The clear coat safe Microfiber lifts and traps dirt and grime for a brilliant, swirl-free finish. The comfort-fit cuff and soft inner lining make this wash mitt a pleasure to use. P/N 09-02355 ..............................$4.80
Rich, dark, high-gloss tire protection that lasts for weeks! Our advanced, long-lasting formula endures, even through washing and rain, and dries quickly eliminating overspray, runs and drips. Proprietary macropolymers and copolymers protect against UV damage and tire browning. The end result is that your tires stay black with a rich, dark, high-gloss shine for weeks longer than ordinary tire-shine products. See for yourself why Endurance is the enthusiasts favorite for high-gloss shine that lasts! Quantity: 24 ounces. Trigger Spray Bottle version. P/N 09-03441 ..............................$8.25
EVEN COAT MICROFIBER APPLICATOR PADS - Meguiars Even Coat microfiber applicator is
the ultimate pad for swirl free, show car perfect results. Gentler than a foam pad, this applicator is ideal for ultra fine polishing and waxing. Its large, 5 inch surface area allows for faster polishing and waxing. P/N 09-02356 ..............................$3.70
Our best performing, longest lasting aerosol! Endurance is a significant advancement in tire protection technology. Proprietary macropolymers and copolymers protect against UV damage and tire browning. The end result is that your tires stay black with a rich, dark, high-gloss shine for weeks longer than ordinary tire-shine products. See for yourself why Endurance is the enthusiasts favorite for high-gloss shine that lasts! Quantity: 15 ounces. P/N 09-03440 ..............................$8.75
Tough on grime and safe for your engine! Our non-caustic formula penetrates and cleans even the hardest to reach areas, quickly removing dirt, grease and grime, yet will not damage rubber and plastic components. Biodegradable formula is quick and easy to use. Works great for wheel-well cleaning, too! Quantity: 16 ounces. P/N 09-03438 ..............................$5.75
392
FOAM CUSHIONING
Virtually eliminates mist. Requires less maintenance. Blows less heat up the stack. Uses up to 50% less material. Delivers better pattern control. Reduces overspray up to 90% Eliminates high-pressure flop and tiger stripes.
CM WP ME HA
ABS thermoplastic fire-rated sheet material can be used as a base material for making of glare shields and side panel backing. Easily cut, drill, saw, and grind this ABS sheeting. The plastic sheets have an excellent ductility and formability. Meets FAR 25.853 burn requirements. Smooth flat surface on one side and a matte finish on the other side. Color: Black. Sheet size is .063 x 23.5 x 54. P/N 11-02054 ...................... $73.65
Leather-Like Vinyl has the ultra-soft leather feel without the leather cost. It can be used for seats, wall panels and headliners. Meets FAR 23.853(a) flammability requirements. It provides superior wear resistance (100,000 cycles), abrasion resistance and excellent tailorability. Width is 54 and weight is 27 oz. per linear yard. Available in camel, gray and black. Pricing is per linear yard. Sample provides a smallpiece of each. Burn certificates are available upon request. Gray ................. P/N 11-02056 .........$49.85/yd. Black ................ P/N 11-02057 .........$49.50/yd. Camel .............. P/N 11-02059 .........$49.50/yd. Sample Kit includes small piece of each Sample Kit ....... P/N 11-02061 ...........$1.99/yd.
The GTS-3800 is highly productive for nearly all fine finish applications. Easily spray stains, lacquers, oils, enamels, urethanes and automotive finishes. Plus, it atomizes many water-based latex and acrylic coatings, multi-color and other higher viscosity coatings. Turbine Stages 3 Turbine Air Working Pressure 6 psi (.414 bar, 41.4 kPa) max. Turbine Air Outlet Flow Rate 80 cfm (2265 lpm) max. Gun GTS-980 Non-Bleeder Style with Fluid Set #3 Cup 1 qt (1 liter) High-Flex Turbine Air Hose Length Standard units incl. 30 ft (9 m). Use 60 ft (18 M ) max. Power Cord No. 16 AWG, 3 wire, 6 ft (1.8 m) Electrical Rating 12A at 120 VAC Weight: Complete 34 lb Dimensions: 18 in. x 15-1/2 in. x 16 in. P/N 12-15780 ................$954.00
AP LG EP CS
Color-Bond restores or changes the color of leather, vinyl, ABS plastic, PVC, polycarbonate, acrylic, fiberglass, lexan and thermal plastic urethane permanently. It is dry to the touch in 45 seconds and fully bonded in 10 minutes. It will not crack, flake or peel & gives complete grain simulation. You can change color over and over and never obscure the grain or affect the hand. It is now OEM approved by the Ford Motor Company. After 3-1/2 years of testing, the specification that Color-Bond passed is the first of its kind and is approved for worldwide use. Color-Bond will be distributed to the 5,200 Ford Quality Service Parts dealers of North America. It will also be used for repair of instrument panels, door panels and seats in all of the assemble plants. Color-Bond is excellent for restoration of aircraft seats, side panels, glare shields, and other items. Aircraft Spruce & Specialty Co. has been appointed as the aviation distributor for Color-Bond. Color #3 Eggshell White #106 Black #108 Prairie Tan #107 Gray #105 White #103 Navy Blue #103 Navy Blue #254 Natural Tan #231 Ivroy #94 Jag Tan Size 6 oz. Spray 12 oz. Spray 12 oz. Spray 12 oz. Spray 12 oz. Spray 6 oz. Spray 12 oz. Spray 6 oz. Spray 12 oz. Spray 6 oz. Spray Part No. 13-01496 13-01495 13-01497 13-01498 13-01499 13-05120 13-01883 13-02477 13-02588 13-01881 Price $12.75 $12.75 $12.75 $12.75 $12.75 $12.75 $12.75 $13.25 $12.75 $12.95
IN EL
Our most powerful and versatile sprayer offers everything you need on the job for high productivity. This unit is loaded with features and can spray the broadest range of materials.
AV TO
Turbine Stages 4 Weight: Complete 39 lb Turbine Air Working Pressure 8 psi (.552 bar, 55.2 kPa) max. Turbine Air Outlet Flow Rate 82 cfm (2321 lpm) max. Gun GTS-980 Non-Bleeder Style with Fluid Set #3, #4 and #5 Cup 1 qt (1 liter) High-Flex Turbine Air Hose w/Quick disconnects Standard units include 30 ft (9 m). Use 60 ft (18 M ) max. Power Cord No. 12 AWG, 3 wire, 15 ft (4.6 m) Electrical Rating 14A at 120 VAC Dimensions: 18 in. x 15-1/2 in. x 16 in. P/N 12-15950 ...........$1,652.00
PS BV
GRACO ACCESSORIES
Molecubond color chart................... P/N 09-00327 .................... $3.95 The color chart can be viewed on our website at: www.aircraftspruce.com DESCRIPTION 30 ft. Replacement Hose Superflex Hose 54 P/N 12-00016 12-74660 PRICE $92.25 $32.75
393
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Brush Width 1/2 1 2
Capstrip Web
Used to secure fabric to metal ribs in wings and control surfaces. Replaces rib-stitch cord or P-K screws. Provides a more secure and streamlined installation. Drastically reduces covering time. FAA-approved for aircraft listed. Easily adapts to homebuilts with metal ribs. Spacing between clips, 3. Spacing may be reduced to 1-1/2 on highperformance aircraft by using 2 wires, with clips inserted in alternate holes that are spaced 1-1/2 apart. Fabricated from stainless steel wire. Supplied in 25-ft. continuous coils. 25-Ft. Coil............................ P/N 09-19400 ................ $15.50
3 ....... Curved .......... Needle 3C ...... P/N 09-18705 ..... $2.75/ea 6 ....... Curved .......... Needle 6C ...... P/N 09-18710 ..... $2.70/ea 12 ..... Curved Tip .... Needle 12C .... P/N 09-18720 ... $21.40/ea 12 ..... Straight ......... Needle 12....... P/N 09-18725 ..... $6.95/ea 18 ..... Curved Tip .... Needle 18C .... P/N 09-18730 ... $22.15/ea Needle Assortment includes 1 each of the following: 3 curved, 6 curved, 12 curved, 12 straight, 18 straight. P/N 09-18735 ........ $38.00 Made from the highest quality steel. Heat treated, nickel plated. 2-1/4 ...... Curved ....... 18 Gauge .......P/N 09-18300 ....... $1.26/ea 4 ............ Straight ...... 15 Gauge .......P/N 09-18400 ....... $2.70/ea 10 .......... Straight ...... 13 Gauge .......P/N 09-18500 ....... $3.05/ea 14 .......... Straight ...... 13 Gauge .......P/N 09-18600 ....... $7.75/ea 18 .......... Straight ...... 12 Gauge .......P/N 09-18700 ....... $4.65/ea Used to hold fabric in place temporarily in covering operation. Plated steel, 1-1/2 L. 100 Pins ....................... P/N 09-18850 ........ $4.29 Used on some aircraft models to attach fabric to metal wing ribs and empennage ribs instead of rib lacing. Truss-head, type A self-tapping sheet metal screws. Size #4 x 1/4. Stainless Steel, Phillips Head .......... P/N T4X4 ...........$0.03/ea Stainless Steel Type A, Phillips ....... P/N 4RX1/2SS ...$0.04/ea Stainless Steel Type A, Phillips ....... P/N T4X6 ...........$0.04/ea 1/8 diameter. Used to seal tubing vent holes. P/N 04-01496 ................$0.08/ea
INSTALLATION KITS
Aircraft Model Aeronca-Champion Piper All Models Stinson Taylorcraft STC No. SA150S0 SA126S0 SA615S0 Original Equipment Part No. 09-19500 09-19600 09-19700 09-19800 Feet Reqd. 225 175-250 175 225
All install kits $38.95. No clips are included. Order separately. *If clips are used to secure fabric on controls, add 50 ft. Individual spring steel clips used to attach fabric to metal ribs. Eliminates rib stitching. 5% Discount on purchase of 100 P/N 09-19900 .............$0.78 Tac Rags pick up dust like a magnet. Use Tac Rags in final cleaning or dusting of surface before applying enamel, lacquer or synthetic paints. Wipe surface gently to remove all dust, lint and fine sand particles from metal, wood or plastic surfaces. Tac Rags are anti-static, epoxy compatible, and remain soft and tacky indefinitely. Individually packaged.Size: 18 x 36. P/N 09-20000 ............ $0.85 ea. ............$9.18/Dzn This 3M tape is particularly suitable for pin striping, multicolor and other custom painting applications. It is a thin, conformable green polypropylene film tape with a special finish that resists paint runoff. The adhesive adheres instantly and offers good holding power, resists lifting and curling. Stretchable and easy to handle. Provides an extremely fine color-line separation for decorative painting of aircraft. Scotch No. 218. 1/8 x 60 Yds. ...........P/N 09-20200 .......... $12.90 1/4 x 60 Yds. ...........P/N 09-20300 ............ $9.65 3/8 x 60 Yds. ...........P/N 09-20350 .......... $18.90 1/2 x 60 Yds. ...........P/N 09-20400 ..........$10.95
TAC RAGS
Use these 1/8 dia. Pop rivets to attach fabric to the ribs on Champion/Bellanca aircraft. 100 Rivets. P/N 09-18900 ............................$22.35
Aluminum washers may be use in place of original plastic washers under screws and pop rivets to attach fabric to metal wing or empennage ribs. Plastic, 1/8 I.D. x 1/2 OD P/N 09-19000 ............................$29.50 Aluminum, 0.128 ID x 1/2 OD x 0.016 P/N 09-19100 ..............................$7.30 Manufactured from virgin cellulose acetate butyrate resin.
Grommet Part No. O.D. I.D. Type Flat AN231-1 1-1/4 3/8 Flat AN231-2 3/4 5/16 Price each $0.19 $0.18 Price Grommet Part No. O.D. I.D. each Type Seaplane* AN231-4 1-1/8 $0.18 Aluminum 09-19110 3/4 1/4 --
WASHERS
DRAIN GROMMETS
*Depressed center LESS 15% ON QTY. OF 100 (per Part No.) Plastic rings, 4-5/8 O.D. x 3-1/2 I.D. x .050 thick, molded from virgin cellulose acetate butyrate resin. To be cemented to fabric as inspection plate retainer. 20% Discount on 100 or more. P/N 09-19200 .................$0.55 ea Glued over inspection rings to prevent accidental removal. P/N 09-18750 .................$5.25 ea
WOOD BRUSHES
INSPECTION RINGS
Horse hair with metal handle. #1- 3/8 Wide ............................. P/N 09-21400 ..... $0.24 ea. ...$3.65/dz. #2- 1/2 Wide ............................. P/N 09-21500 ..... $0.37 ea. .. $3.65/dz. Grade B fabric patches for quick repairs on Grade B & Dacron covering. Smooth edge, 2.5 dia. Also available in Dacron which are more durable & less noticeable on aircraft exterior. Less 10% For 12 or More. Grade A cotton patches......... P/N 09-17700 ... $5.50/ea Dacron Dollar Patches .......... P/N 09-17705 ... $0.98/ea Ceconite C101 ....................... P/N 09-00162 .. $7.75/ea. Ceconite C102 ....................... P/N 09-00163 .. $7.75/ea. PF P-103 Med. ...................... P/N 09-18750 .. $5.25/ea. P99 Heavy Duty .................... P/N 09-00164 .. $7.75/ea.
This is a clear window, aircraft inspection cover that is a cover replacement for a 3.5 inspection ring. The plate is made from Lexan plastic, can be used with an inspection hole size of 3.38 minimum up to a 3.56 maximum, and should not be installed on aircraft traveling at speeds in excess of 250 knots. It can be cleaned with standard aircraft windshield cleaners. P/N 09-02114 .........................................$8.85
394
CM
1 3 2
WP
4
PIPER INSPECTION FRAMES
Paint can lid with pour spout, yellow, material: Polypropylene. For Use With 1 gallon paint cans. P/N 09-03592 ............$6.25
ME HA AP LG EP CS
The only reusable paint can lid that seals to the inside of all one gallon cans. This keeps the paint out of the lid channel for a perfect re-seal. It keeps all contaminates out of your paint. As it was designed for accurate pouring, it also has a quality screw cap on the pour spout for easier access to trim paints, primers & sealers that are used often, in smaller quantities. Pourit eliminates hazardous paint spill, saves clean-up time and reduces material waste. It is washable and reusable. This product should be used anytime you open a round one gallon can. P/N 09-01756 ............................ $2.65
Front & Rear Strut Opening Reinforcements - Set of 4 P/N 09-00334 ..................... $6.90 Naugahyde Cable Seal Kit - 2 slotted fuselage and 2 aileron punched cable seals ......................................... Set of 4 ... P/N 09-00335 ... $6.40 Front Trim Yoke Inspection Frame..... Set of 2 ... P/N 09-00336 ... $5.50 Underwing Inspection Ring Grommet Set of 2 ... P/N 09-00337 ... $5.90 Tear Drop Reinforcement ................... Set of 2 ... P/N 09-00338 ... $9.75
POLYESTER FLANNEL
POURING PAL
Use for cleaning, scuffing, deburring and finishing by hand with water or solvents. Will never rust. P/N 09-01753 ................ $1.15/ea Just Snap It On! One size fits pint, quart, gallon and 4 liter paint cans. Snaps onto inner rim of paint can to keep paint out of the gutter and ensure a goo seal after use. P/N 09-22210 .........$0.66
PAINT STRAINERS
IN EL AV
TO PS
P/N 09-01496 P/N 09-01497 Helps provide worker protection against certain non-oil based particles. Comfortable, easy to use, and promotes greater worker acceptance increasing wear time. Features 3Ms patented filter media, nose foam, and adjustable noseclip that helps provide a secure seal and helps reduce eyewear fogging. Workplace applications: woodworking, grinding, sanding, sweeping, bagging, other dusty operations. Description 8210 Standard dust mask Vented dusk mask Part No. 09-01496 09-01497 Price $0.98 $1.91
Super Straws reduce or eliminate messes from overspray. The high grade plastic is extremely chemical resistant and can be used with various lubricants, harsh degreasers, and compressed gases. Super Straws increase the range and utility of aerosol products by using a 16" high grade plastic tube to access those hard to reach places. Easily cut to any length using a knife or scissors, Extend-A-Lube Super Straws are proudly manufactured, packaged, and sold in the U.S.A.! P/N 09-02398 ................... $2.95
BV
395
Fluorescent Paint (Red/Orange) Up to 4 times brighter than other colors. Ideal for aircraft, boat - wherever visibility is vital. For best results, use over light colored base. #18-1301 ................................ $7.85/ea. Chrome Paint restores new chrome appearance to chromed surfaces. #20-199 .................................. $7.75/ea. Scratch Filler Primer Ideal for filling nicks, scratches, and minor surface imperfections. They dry fast, are sandable, and provide a smooth uniform surface for top coats. #7-3500 - Red Oxide .............. $5.20/ea. #7-4500 - Platinum Gray ........................................ $7.50/ea.
Excellent adhesion to aluminum and steel Tempos Aircraft Enamel has been especially formulated to adhere to aluminum and steel; providing excellent corrosion resistance. Recommended applications are all interior and exterior aluminum and steel surfaces, including wheels, landing gear and inside door hatches. For propeller blades, we recommend Epoxy Propeller Coating. Neutral Gray Enamel Primer #750 ...................... $6.95/ea. 09-00985 .................... Black ...............................$6.95 09-00989 .................... Gloss White ....................$6.95 09-00987 .................... Medium Gray ..................$6.85 09-02070...................... Flat Black ........................$6.95 09-00988 .................... Flat White........................$6.95 Resists heat to 500F . Tempos Aircraft Engine enamel withstands the high heat demands of aircraft engines. This modified chain-stop alkyd enamel formula has excellent corrosion and fuel resistance. All Tempo spray products feature the exclusive adjustable Fanspray valve which offers a professional spray pattern so anyone can paint like a pro. The extra-width pattern evenly coats about 3 times the area with each pass compared with an ordinary spray valve. Packaged in 11 oz. to 16 oz. cans, depending on product. WARNING: POSSIBLE LINK BETWEEN CHROMATE PIGMENTS AND LUNG CANCER Several independent technical studies have suggested that excessive inhalation of zinc chromate dust may cause lung cancer. If conditions are such that this limit may be exceeded, additional protective equipment is required. A respirator that has a NIOSH/MESA approval TC-23C. See catalog for respirators that meet this requirement. Lyc. Gray ...........................................P/N 219 ................................$6.75 Olds Cont. Gold .................................P/N 239 ................................$6.75 Gloss Black .......................................P/N 09-00995 .......................$6.95 Chevy Orange Engine .......................P/N 09-02405 .......................$6.85 Dries in under 15 minutes Tempos Aircraft Lacquer is ideal when a very fast dry is required. This blended nitrocellulose lacquer formula can be applied to all interior and exterior aluminum and steel surfaces, including wheels, landing gear and inside door hatches. When additional corrosion protection is required, we recommend Tempo Aircraft Enamel. Clear .......................... P/N 809 .................... $7.50 Blk Acrylic .................. P/N 09-01032 .......... $5.95
AIRCRAFT ENAMEL
Etches and primes in one easy step. Can be used under all todays automotive finishes. Perfect for spot repairs. Creates superior adhesion on most plastics, fiberglass, bare steel, aluminum and stainless steel. Color: Green. 12oz. Spray Can P/N 09-02099 ................... $9.75
CAN-GUN
AIRCRAFT LACQUER
Krylon High Heat & Radiator Paint is ideal for mufflers, radiators, and engine blocks. Withstands temperatures to 1200F. Guards against rust. Available in three colors. 12 oz. aerosol cans. 12 oz. Aersol. Aluminum ...................... P/N 15-05467 ........$12.25 White ............................. P/N 15-08254 ........$12.50 Black ............................. P/N 15-08255 ........$12.25
Maximum adhesion to bare aluminum and steel Tempos Zinc Phosphate and Zinc Oxide Primers are recommended for priming bare metal. These primers provide maximum bonding to bare aluminum and steel. Tempos Primers have been the workhorse in the aviation industry for many years. Zinc Oxide has been recently introduced to provide a safer, healthier alternative to Zinc Chromate with equal performance. The A-701 Yellow and A-702 Green Zinc Phosphate Primers meet the performance standards outlined in Federal Specification T-P1757A. They also exceed the 800 hours of salt spray fog test (ASTM #B117). A-701 will replace A-901 Yellow and A-702 will replace A-902 Green. Yellow (12oz.) A-701 ........................ P/N 09-02128 ........................$7.95 Green (12oz.) A-702 ......................... P/N 09-02127 ........................$8.25
Superflite engine enamels are fast-drying enamels developed specifically for air-cooled aircraft engines used in light duty aviation industries. The Superflite enamels feature superior adhesion, heat resistance, and a gloss finish. Cure Schedule: Dry to touch: 15 minutes, Dry to handle: 60 minutes Dry through: 24 hours To recoat: Before 60 minutes , or after 72 hours Benefits: Topcoat - Air dry or low temperature cure, For use on bare metal or painted surfaces Specifications: Shelf Life: 12 months at recommended storage temperatures, Heat Resistance: Up to 400 degree F. Lyc. Grey Paint Quart .................................................P/N 09-02558 .................................................... $21.85 Lyc. Grey Paint Spray .................................................P/N 09-02556 ...................................................... $9.85 TCM Gold Paint Gallon ...............................................P/N 09-02560 .................................................... $99.50 TCM Gold Paint Quart ................................................P/N 09-02557 .................................................... $21.50 TCM Gold Paint Spray ................................................P/N 09-02550 ...................................................... $9.85 Gloss Paint Black Quart..............................................P/N 09-02559 .................................................... $22.25
396
AKZO interior epoxy primer #463.12-8 is a chemically cured 2-component epoxy primer designed to provide maximum protection from various chemicals, hydraulic fluids, aviation fuels, hydraulic fluids, and corrosive causing media. Drying time to touch is 15 minutes and to recoat is 1-24 hrs. Shelf life: 2yrs, Color: Green. Used extensively in military and aerospace applications and popular with aircraft builders. Uses 1 gallon of primer and 1 gallon of catalyst. 2 gal. kit ....................P/N 09-24735 ........ $182.95 TR-19 Thinner ...........P/N 09-00439 .......... $94.25
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This white heavy duty chemical & solvent resistant amine cured primer is fast drying and corrosion inhibiting. Can be applied & cured to temps down to 35F. Mixing ratio is 2 parts base primer: 1 part EP-430 Catalyst. Order in kits. Quart Gallon Product Part No. Price Price Part No. W2248/EP420 09-00573 $83.75 09-00574 $289.95 Primer White kit Epoxy White base 09-00564 $48.35 09-00565 $165.40 Rand E-500 09-00566 $15.00 09-00567 $58.80 Reducer Rand EP430 09-00570 $20.65 09-00571 $35.00 Catalyst (pt)(qt)
ALODINE NO. 1001 An invisible coat to provide in-depth corrosion proofing to the brightened aluminum surface and act as a firm barrier against the elements and continued corrosion. Covers 250 sq.ft. per quart. Qt ............ P/N 09-01628 .... $31.95 Gal. ......... P/N 09-01629 .... $49.75
This green primer is solvent resistant, amine cured, fast drying and corrosion inhibiting. Can be applied & cured to temperatures down to 35F. Mixing ration is 2 parts base primer: 1 part EP-430 Catalyst. Order in kits. Quart Gallon Product Part No. Price Part No. Price Rand B6433 09-00575 $84.00 09-00576 $285.95 PrimerGreen kit Epoxy Green 09-00568 $48.35 09-00569 $165.40 base Rand E-500 09-00566 $15.00 09-00567 $58.80 Reducer Rand EP430 09-00570 $20.65 09-00571 $35.00 Catalyst (pt)(qt)
ALODINE NO. 1201 After precleaning with Alumiprep 33 or Metal Prep 79, rinse with water. Apply Alodine without dilution by brushing or swabbing with sponge. Rinse with water and surface is ready for paint. This is a visible coating which leaves the surface with a golden coloration. The alodized surface provides protection against weather and firmly bonds paint. One quart treats about 200 sq. ft. HAZARDOUS. Qt. .......... P/N 09-01619 ........ $17.95 Gal. ........ P/N 09-01618 ........ $39.85
Aquaprep is a safe, superior cleaner for use on any metal or hard surface and is designed to replace solvent cleaners. It may be used on painted, primed, or bare metal surfaces. It is non-staining, provides improved cleaning and improved corrosion resistance, and is compatible with MetalPrep and Alodine. Designed to remove sealers, wax, grease, silicone, and crayons. Try some new Aquaprep on your next metal cleaning project. Covers 400 sq.ft. per quart. 1 Gal. ........... P/N 09-42100 ...... $51.85
An excellent clear gloss epoxy varnish for interior and exterior use. It provides superior weather durability and excellent chemical and solvent resistance. Can be used over a one component varnish primer if desired. Mixing ratio is 2 parts base varnish: 1 part EV-410 Catalyst. Order in kits. Quart Kit (yields 2.5 qts) Incl. EV-410 Catalyst & E-500 Thinner P/N 09-00670 ............. $59.40 Gallon Kit (yields 2.5gal) - Incl. EV-410 Catalyst & E-500 Thinner P/N 09-00671 ........... $198.00 Base: Quart ...............09-00666 ................. $43.25 Gallon ...............09-00667 ............... $146.70 Catalyst: Pint ...................09-00668 ................. $18.25 Quart ...............09-00669 ................. $30.55 E-500 thinner (Reduce 50%) Quart ...............09-00566 ................. $15.00 Gallon ...............09-00567 ................ $58.80
A chemical curing accelerator for use in W-2248 EP-420W Epibond Epoxy Primer, B-6433 EP-420G Rand-O-Plate Epoxy Primer, and EV-400 Epoxy Varnish according to direction on base component label. Reduces polymerization time, not solvent evaporation. 1/2 Pint .............P/N 09-04650 ............... $9.00
Touch-N-Prep Alodine 1132 no-rinse conversion coating effectively phosphates most metals including aluminum, ferrous and galvanized substrates. Doesnt require rinsing, and can be air dried or force dried with hot air or an infra-red lamp. High density acrylic tip of the Touch-N-Prep applicator can be modified with a single edge razor blade to form any shape. The application method controls the amount of coating applied to the surface. Covers 20 sq.ft. P/N 09-01630 ....................$76.85
A mild solvent blend formulated to remove oil, silicone, wax, and other contaminants from all metal surfaces before priming. Also removed tape gum from painted surfaces and acrylic windshield materials. Qt ......................P/N 09-40810 ............. $11.95 Gal ....................P/N 09-40820 ............. $44.95
397
STEWART SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
An Easy-To-Apply Glass-Like Finish With Many Incredible Protective Properties For Almost Any Aircraft Surface. In tests it resists blow-torch heat (yes, blow-torch flame) above 2000F It is impervious to virtually any chemical. It is excellent for hardness, flexibility, impact and scratch resistance, adhesion, and corrosion protection. On any aircraft, EverShield has applications from nose cone to tail cone. Wiped on a prop, this incredible film sheds bugs, pebbles, salt spray, whatever. On an exhaust, it seals the metal from corrosion and by refraction reduces heat transmissions to cowling and elsewhere. On leading edges bugs slide off. Over the entire plane, the slick surface fortifies the boundary layer, reduces drag. It is non-hazardous (like all SS products). Cleans up with water (or solvents). Grips most any surface, from stainless steel, to plexiglass, to paint. EverShield is a true breakthrough miracle coating. Theres nothing comparable available. Once you use it youll continue to find a myriad of applications. Better give it a try soon. STEWART SYSTEMS EVERSHIELD is a two-component, ceramic clearcoat/chemical treatment system designed for Original Equipment Manufacturers (OEM) to protect the substrate over which it is applied from corrosion and oxidation. Will not yellow, chip, crack, or peel. If gouged or damaged, the finish will not experience creepage and is repairable. A low VOC and EPA compliant coating. Considered non-hazardous by EPA definitions and does not contain lead or chromates. Please follow local and state regulations in the proper use and disposal of this product. Size Part No. Price 2 oz. 09-00465 $37.85 4 oz. 09-00466 $65.50 8 oz. 09-00467 $75.50
Stewart Systems EkoStrip is an environmentally safe paint stripper that can be sprayed, brushed or rolled on your painted surface. EkoStrip is not solvent borne and does not dry out and stop working overnight. In most cases the stripping action will take place in 2-4 hours. EkoStrip has no harsh odors, is not caustic and is biodegradable. 1 Gallon ....................... P/N 09-03080 .....................$58.85 5 Gallon ....................... P/N 09-03081 ...................$255.95 Stewart Systems EkoPoxy Primer/Sealer is a high quality water based Epoxy primer for use on many substrates. Stewart Systems EkoPoxy can be used on interior and exterior surfaces where there is more chance of corrosion from the environment. Excellent adhesion to bare metals, resists flash rusting which can occur with latex based primers. Stewart Systems EkoPoxy has superior chemical resistance, is fast drying and mar resistant. Stewart Systems EkoPoxy is low in VOCs and compatible with a wide range of top coats including EkoPoly Top coat. Nonhazardous, nonflammable and water cleanup, Stewart Systems EkoPoxy is your best choice for Primer. Quart White ...........................P/N 09-03066 ...........$49.65 Quart Smoke Grey ................P/N 09-03068 ...........$54.85 Quart Charcoal Grey .............P/N 09-03070 ...........$49.95 Quart Green ..........................P/N 09-03072 ...........$52.25 Gallon White ..........................P/N 09-03067 .........$189.95 Gallon Smoke Grey ...............P/N 09-03069 .........$198.95 Gallon Charcoal Grey ............P/N 09-03071 .........$189.95 Gallon Green .........................P/N 09-03073 .........$189.95
A water-based product that eliminates rust. First, rust is converted to ferric iron, a black organic compound. Second, a coating of clear acrylic is formed over the coated area. The surface that remains after the transformation can be either left black or coated with Stewart Systems wide range of products for the desired outcome. Product tests have shown that it has extended the life of equipment or products for several more years after probable replacement. Can be used on all rusted surfaces. P/N 09-00482...............$45.75
EkoEtch Aluminum Etch is a concentrated combination acid based detergent and degreaser. Removes scale, corrosion, light oil, processing fluids and brightens aluminum. A non-hazardous, water reducible and non-flammable. Use it to prepare both old and new aluminum surfaces before applying Stewart Systems Primer/ Sealers. P/N 09-00473...............$24.85 Stewart Systems EkoBond EkoBond is a revolutionary water based cement for the application of fabric. EkoBond has extreme bond strength for fabric to fabric and fabric to non-fabric surfaces in both peel and shear tests. EkoBond is very user friendly since it has very little odor and can be used in a closed shop with no health or fire hazards. EkoBond dries quickly and will not attack primers or enamel paints. EkoBond is non-flammable and environmentally friendly. Quart ................P/N 09-41195 ................$53.75 Gallon ..............P/N 09-41200 ..............$168.95 EKOBOND LINEN - For the look of old linen with the convenience of Dacron. EkoBond linen will make the fabric look just like old cotton, while giving you not only the antique look, but also the strength and durability of EkoBond. Quart ................P/N 09-03064 ................$53.75 Gallon ..............P/N 09-03065 ..............$171.95 Part of the Stewart Aircraft Covering System, Stewart Systems EkoFill seals the fabric, provides UV protection, fills the weave and acts as a primer for application of EkoPoly. On fabric airplanes, all covering, rib stitching and tapes are complete and the fabric has been cleaned with EkoClean before applying EkoFill. EkoFill is used on Dacron/polyester fabric, glass cloth, gel coat and composite materials. It has excellent adhesion, superior high build properties and is an outstanding UV barrier on fabric and composite surfaces. EkoFill dry sands very easily with open coat sand paper. EkoFill is non-flammable, has little odor and is water cleanup. Grey Quart ............P/N 09-06700 ...........$49.65 Grey Gallon ..........P/N 09-06800 .........$163.95 White Quart ..........P/N 09-03087 ...........$49.50 White Gallon .........P/N 09-03088 .........$155.95
Stewart Systems Primer Sealer is a high quality, water-based single component primer, not requiring any catalyzing agent. Performance obtained is equal or superior to that of two-component, catalyzed epoxy systems. Primer Sealer offers good coverage, excellent durability, and ease of application, as well as being a low VOC and EPA compliant coating. It is a low VOC (Volatile Organic Compound). high performance production coating. It is considered non-hazardous by EPA definitions and does not contain lead or chromates. The solid and semi-solid sludge produced in spraying and clean up can be flocculated; dried and sent to a Class B landfill. Check with your local and state regulations for proper handling. Quart White ...........................P/N 09-00464 ...........$36.50 Quart Smoke Grey ................P/N 09-03074 ...........$39.85 Quart Charcoal Grey .............P/N 09-03076 ...........$36.50 Quart Green ..........................P/N 09-03078 ...........$38.75 Gallon White ..........................P/N 09-00481 .........$117.95 Gallon Smoke Grey ...............P/N 09-03075 .........$121.95 Gallon Charcoal Grey ............P/N 09-03077 .........$173.95 Gallon Green .........................P/N 09-03079 .........$121.95 EkoClean Heavy Duty Cleaner/Degreaser concentrate is used with the Stewart Covering System to clean fabric before application of EkoFill. For cleaning fabric, EkoClean is diluted 30-1 with water, and lightly applied with a spray bottle, and rinsed with clear water. EkoClean is a non-butyl, water soluble, concentrated degreaser and general purpose cleaner. In stronger concentrations EkoClean attacks grime, exhaust stains and grease spots from painted surfaces. EkoClean does not contain phosphates and is USDA approved. Quart.................. P/N 09-03089...............$13.75 Gallon ................ P/N 09-03090...............$48.85
coat, offering outstanding coverage, durability and ease of application. EkoSeal is a low VOC, EPA compliant coating. Use on wood spars and plywood before installation of fabric. Wood sealer is resistant to UV yellowing in exterior applications and is also available in a satin finish. Size: 1 quart. Quart Clear .......................... P/N 09-03082............$41.75 Quart Satin ........................... P/N 09-03083............$41.75 E-1850-EkoSeal Sanding Wood Sealer E1850 is a wood sealer with a sanding filler added to fill light voids and grain in wood products. After sanding, apply EkoSeal Wood Sealer or any other top coat. Size: 1 quart. Quart Clear .......................... P/N 09-03084............$46.85
398
Nuvites surface finish enhancement and protection echnology offers the highest-performance surface maintenance and protection systems available. These products are designed to be used on your aircraft, boat, recreational vehicle, truck, auto or other vehicle anywhere, anytime. Nuvite has the answer for your operations in an EPA-sensitive environment.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Same easy wipe on, let dry, wipe off surface cleaner with enhanced cleaning and oxidation removal capabilities. Ideal for tough cleaning due to long intervals between cleanings. Leaves a beautiful shine and an effective UV protective barrier. Qt. ............P/N 09-00583 .......... $11.95 Gal. ..........P/N 09-00582 .......... $34.95 Dry Wash Cleaner and Polish (Routine dry wash cleaning with gloss enhancement and UV protectant barrier) - Use for routine cleaning where wetwashing is not possible or gloss enhancement is desired. Contains non-abrasive media to remove even stubborn soiling. Cleans dirt, carbon and oil and leaves a protective barrier against UV deterioration of paint. Can also be used to clean bare metal surfaces. Apply with mop, spun cotton pad, towel or by hand. Agitate uniformly over area to be cleaned, spreading material to a very thin layer. Let dry completely and buff off by hand with clean terry towel. Supplied ready-to-use. Qt. ............P/N 09-00581 .......... $10.95 Gal. ..........P/N 09-00580 .......... $32.95
NuVite CitriCut is a citrus based airframe wetwash and wipedown cleaner. Pleasant citrus smelling wet wash or wipe down cleaner that is especially friendly to the environment. Works great for standard wet washing with mops or scrub pads. When used as a wet wash, water sheets off, minimizing water spotting. CitriCut is also handy for hand debugging or hand wipe down without need for rinse -so there is no need for water or floor cleanup. Spray CitriCut at 1:8 from hand trigger sprayer for hand debugging or wipedown and wipe with terry towel until clean. Use a clean towel to buff up surface shine. No need to rinse surface. Supplied as concentrateuse 1:8 for hand wipe down or 1:16 in wet wash water. P/ N 09-00584............................$12.95
Clean & Polish in One Step! Two quarts of Famous Nuvite NuPower II cleaner/polish. Will clean tough dirt & oil and give your paint a slick, shiny New Paint look and leave a protective coating against the suns U/V damage. Includes three terry application towels and two special finishing gloss microfiber cloths. For Nuvite NuPower II details see Part No. 09-00581 & 09-00580. P/N 09-02026 ................$59.50 Restore Your Paint to Look Great Again! Two quarts of super Nuvite NuPol heavy-duty cleaner and paint restorerwill clean up a really grimy one, removing paint surface oxidation to reveal the bright color paint you once had, and leave an amazing super shine with UV protection! Includes two special spun fiber application pads and three terry polishing cloths. For Nuvite NuPol details see Part No. 09-00583 & 09-00582. P/N 09-02027 ................$58.25
Nuvite engineers have formulated a system of polishes to meet the needs for almost any metal and paint polishing project. New metal to antique, the formulations in the NuShine II Polishing System will give superior definition, highlights, imagery, clarity, and will retain the finish longer than normal polishes. Nuvites NuShine II graded polishes use high technology materials with programmed abrasive characteristics and are blended with superior carriers to offer the ability to produce cutting action when needed, yet offer micron-level finishing in the finer grades that produces highest reflectance and image excellence. Grade S (for final finishes) The finishing grade that gives the really deep, clear image when used as a final finish over a properly prepared, oxidation-free surface. 0.5 Lb. jar ........P/N 09-00578 .......... $35.95 Grade G6 (SS & titanium or heavily oxidized aluminum) When a heavy cut of the surface is needed, G6 may be a good answer. G6 has a high-tech abrasive system that is designed to do a quick, aggressive cut, and immediately break down to a finer cut, similar to Grade C. Use when there is heavy oxidation on the surface of aluminum, or even when very light corrosion is evident. Can also be used to blend surface scratches in aluminum. Can also be used for polishing stainless steel. 0.5 Lb. jar .....P/N 09-00586 .......... $35.95 Grade C (for unpolished aluminum and repolishing degraded brightwork) - C is a cutting grade polish that we recommend to prep for using Grade S. Use Grade C to begin polishing on clad aluminum that has never been polished. Will also remove the cloudy/hazy white background found in many otherwise good polish finishes. 0.5 Lb. jar .........P/N 09-00587 .......... $35.95
Nuvite C-49 SuperCleaner is the most versatile and effective cleaner you can buy when you want to clean fabrics, leather, carpet, plastics, laminates and even metals! In other words, for cleaning all types of surfaces generally found in commercial & private aviation, building or institutional interiors, RV, truck and marine interiors, or even home interiors! P/N 09-02089 ..................$6.95
Nuvite SS-9-3 is the championship-caliber answer to the need for an effective and safe all-purpose liquid alkaline cleaner. It will clean the toughest of underbelly grease, oils and fluid leakage at full strength, or can be diluted to 1:12 to make an easy-to-use debugger and whole-airframe wipedown fluid that leaves a beautiful squeaky-clean and shiny surface that does not need to be rinsed. It works great for in-place cleaning during other airframe or engine maintenance. P/N 09-02084 ..................$5.50
Nuvite Leather Guard helps you keep that brand-new, supple, fine finished leather look and feel for luxury aircraft, RV or automotive seating, fine furniture or institutional use. Leather Guard is the finest enrichening formula available for leather nutrition . P/N 09-02091 ................$11.95
Polishes for both metal and paint finishing that will provide the finest surface finish available. Has been shown to outperform all other aviation, automotive and marine polishes in side-by-side testing by users throughout the world. Affords the operator the choice to select the grade of polish to match the needs of the surface to be polished, be it brand new, oxidized in use, or with atmospheric corrosion. NuShine II not only polishes paints and metals to an incredibly deep, clear and image-reflecting surface, but also imparts a protective chemical barrier to inhibit corrosive oxidation to the metal. Grade F9 1/2 lb............................... P/N 09-02086 ........................$35.95 Grade F7 1/2 lb............................... P/N 09-02087 ........................$35.95 Grade F7 1 lb.................................. P/N 09-02087-1.....................$49.95 GradeGrade A 1/2 lb. ..................... P/N 09-02088 ........................$35.95
399
POLISHES CLEANERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aero Gloss polish is used by 80% of the worlds major airlines. It is now available to the general aviation and experimental aircraft market. Removes turbine soot and exhaust stains from paints. It is an excellent plexiglass polish and can be applied with a power buffer. It takes 1-2 pints and 3-4 hours to polish an average Cessna 182 with Aero Gloss. Pint ...................P/N 09-38100 ...........$19.95 Gallon ...............P/N 09-38101 ...........$79.90 5 Gallon. ...........P/N 09-02180 .........$289.95 This exceptional new polish cleans off dirt, stains and oxidation and restores the original bright color of the aircraft leaving a dazzling shine. StarBrite also cuts fuel consumption and boosts speed by reducing drag an amazing 5.5%. Contains no wax, oils or acids. 16 fl.oz. .............. P/N 09-23900 ...... $22.75 Top Gun Ultra Finish is the ideal one-step product for all aircraft finishes. The product removes surface contaminates and oxidation though a unique chemical process, rather than using harsh abrasives. The coating left behind is not a wax, but an extremely hard and durable sealant. This affords superior long term protection (up to 12 months or longer), and easier cleaning of your finish. Once applied, bugs and corrosive elements remove more easily. Use Top Gun Ultra Finish to add brilliance to your aluminum and magnesium alloys. It is also very effective in restoring clarity to plexiglass windshields, side windows, and lenses. 16 fl. oz. Made in the U.S.A. 16 oz. ...........P/N 09-00192 ...........$16.75 Polymer Wetcoat removes mild oxidation leaving your autos finish protected for one full year. No other product can make that claim. A combination of polymeric resins and 100% premium carnauba creates the most durable finish on the market. 16 FL. OZ. P/N 09-00157 ..................$19.95
AERO GLOSS
Met-Alls Detail Polishing Kit will produce a show room finish on bare metal, painted surfaces and fiberglass using Met-All polishes and premium bonnets. Each bonnet features a recessed loop back so the edge and face can be effectively used with less concern for marring the finish. Change pads quickly and easily. Ideal for polishing aircraft, cars, motorcycles, boats etc. P/N 09-00448 ................... $34.50
Blue Magic produces a deep mirror shine. The oxide residue left after polishing is easily wiped off with a rag. A small amount will polish a large area. Airshow aerobatic pilot Chuck Lischer, Jr., whose high performance Swift is shown here, recommends Blue Magic as the best polish available for polished aluminum aircraft. #500 1 lb. Can......................P/N 09-24600 .......... $13.25
Anti-static, Anti-fog Will remove marks from crayons, magic markers and paint oversprays Removes residue glue from protective backings and masking tape Evaporating properties in the formula - cleaning is quick and easy without leaving any streaks or swirl marks Resists fingerprints Seals pores in plastic and leaves a protective coating Pleasant clean aroma Gives plastic a clear, lustrous look. 7 oz.............. P/N 09-00518........ $7.95 14 oz............ P/N 09-00517........ $9.75
Extremely mild abrasive compound, with anti-static and antifog properties in its formula Ideal for the removal of surface scratches and blemishes from windshields or heavy cleaning of all plastic materials Water soluble, excess can be wiped off with a wet sponge or cloth Easy to use. 15 oz. ........... P/N 09-00519 ......... $11.75 Recommended by LP Aero Plastics and other leading aircraft windshield manufacturers, our 210 Plastic Cleaner & 210 Plus will help keep your windshield crystal clear and scratch free for safe, enjoyable flying. Our Windshield Care Kit Contains: (1) 7 oz. 210 Anti Static/Anti-Fog cleaner & polish, (1) 7.5 oz. 210 Plus Anti-Static plastic scratch remover, (100) 9x 16 Sontara Aircraft Wipes. P/N 09-00521 ..........$38.75
Seal-A-Plane provide an unbelievable shine that seals and protects the finish; we have also found that the exhaust and bugs dont like to stick to the surface and can be removed with just a damp cloth. Unlike products that were designed for the automobile industry, Seal-A-Plane is for aircraft and protects the aircraft surfaces from harmful UV rays and corrosion. Common waxes breakdown in the sun. Seal-A-Plane actually gets harder in the sun and is stable up to 500 degrees F. Seal-A-Plane contains no silicones and is non corrosive. It normally only requires application once a year (depending on the planes operating environment) and can be used on any surface including fiberglass and Plexiglas. Never before has there been a product on the market like Seal-A-Plane. Turbine owners especially will appreciate a product that is available that will remove the ugly exhaust stains. One 16 ounce bottle will be enough for most single engine planes and two will do most light twins. P/N 09-01650 ............................$24.95 Master Formula Sealer Gloss Protective Sealer waterproofs, protects and seals any hard surface. It leaves a durable, glossy protective coating thats easily maintained and lasts up to one full year. Master Formula Sealer Gloss is excellent for use on any metal or painted surface. These surfaces include all car finishes including clear coasts, gel coasts, plastics fiber glass. They also include all metal surfaces such as aluminum, chrome, brass, stainless steel, gold, silver and more. 16oz. 12OZ. ................ P/N 09-02077..$22.75 An aluminum polish which removes and prevents pitting. Makes aluminum shine with mirror-like brilliance. Nontoxic, non-abrasive and non-flammable. A non-silicone product which resists further corrosion. Meets military specifications. 1 Lb. Can ..............P/N 09-24200 ...........$10.90 2 Lb. Can ..............P/N 09-24300 .......... $17.75
SEAL-A-PLANE
Bring new life to your plastics with Clearview. Developed to clean, polish and protect all types of clear and colored plastics Helps hide small scratches by filling them with a fine protective coating. Wipes on & off easily with no smudges or residue. Anti-static. Spray can. 16 oz. .............. P/N 09-00531 ............ $5.50
MET-ALL
Simple but effective system of six polishes designed to polish painted surfaces, aluminum 22916T6 & 2024T6 both clad and bare, and other metals including steel and titanium. All polishes are color coded to reduce cross contamination and aid in taking the guesswork out of any polishing procedure. When used properly, The Granitize System will produce a smooth, highly reflective mirror-like surface on brightwork that can be treated with Xzilon molecular adhesion to maintain the finish. FINISH
Dissolves and removes bugs without scrubbing - no elbow grease is required! This is a quick, time saving product. Just spray, wait and wipe. Finally a product that solves messy problems without being messy!! Unlike other formulations, when sprayed, Bug Blaster instantly attacks bug proteins and acids. You will not have the dripping, messy run-off you have with conventional bug removers. Perfect for use in paint shop environments where run-offs need to be avoided. 32 OZ ........................... P/N 09-02080 ...... $18.75 1 GALLON .................... P/N 09-02081 ...... $38.25
400
POLISHES CLEANERS
Rolite Metal and Fiberglass Polish will restore the original brilliance of virtually any metal surface, as well as being ideal for fiberglass and plexiglass parts. Rolite products are preferred by many EAA members maintaining bare aluminum aircraft as well as by commercial airlines and prop shops worldwide. Will create a mirror-like shine like you have never seen. Recommended for maintaining brilliant propellers and spinners. 10 Oz. Can .......P/N 09-42555 ...........$17.50 2 Lb. Can..........P/N 09-42560 ........... $33.75 A super-fine, high quality aircraft cleaner/polish that improves the appearance of alcald aluminum. It removes light to medium oxidation, soil, and jet blast residue with ease. Finished gloss and reflection of aluminum: extremely high. 1 Lb. Jar ...........P/N 09-00183 ...........$63.85
Excellent for cleaning and polishing stainless steel and aluminum leading edges and nose cones. Use Peek to restore tired looking paint surfaces. Removes scratches from Perspex windscreens and helicopter bubbles. Peek protects against the elements. The use is simple, the results conclusive. 100 ml tube................... P/N 09-02390 ........$12.25 500G mousse ............... P/N 09-02392 ........$21.95 1000 ml can .................. P/N 09-02391 ........$39.98
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Researched and developed for the commercial aircraft industry. This precision aluminum polish is widely used by many domestic airlines. Manufactured to meet all Boeing and McDonnell Douglas Specifications (Boeing D6-17486; CSD1, Type 1 &V). Supra 90 will give you a mirror-like shine on your aluminum (or any other metal) surface that was never before believed possible! 2 Lb. Can..........P/N 09-42420 ........... $65.75
Plas-Tec cleans, shines, and protects todays high-tech plastics. Plas-Tec is a non-aggressive, optically clear cleaner that lifts fingerprints and smudges, leaving a protective, antistatic coating that resists dirt build-up. Plas-Tec is excellent for use on acrylic, Lexan, or Plexiglass windshields and windows as well as aircraft instrument panels, and many other applications. 4 oz. Can ..........P/N 09-00308 ............ $4.50 16 oz. Can ........P/N 09-00309 ............ $9.50 1Gal. Can .........P/N 09-00310 .......... $29.75
Maas polish removes fine scratches, prevents clouding on plexiglass windshields and windows, reduces air resistance, and repels moisture. It is used by major air carriers and has provided them with a 10% savings on fuel due to Maas ability to substantially reduce parasitic drag and friction on the leading edges of the aircraft. Excellent for use on anodized or bare aluminum, painted surfaces, plastics, plexiglass, and fiberglass. 1 lb. can ....... P/N 09-23545 ....$17.95
The Sun Protector. Protect your aircraft interior by using Rolites maximum sun block formula. Contains no solvents, silicone oils, or petroleum distillates. Its anti-static formula will produce a shine on your vinyl or leather seats without being slippery or tacky. And will actually repel dust! Comes in spray pump bottle. 8 oz. Bottle ........... P/N 09-42435 ......... $8.95 Developer for high speed aircraft applications. Voodoo Wax is the wax of choice for Team Voodoos P-51 Mustang Unlimited Air Racer. The Voodoo Wax formula is ideal for application on aircraft, boats, automobiles and motorcycles. Voodoo Wax Cleaner Polish contains the finest blends of ultra fine polishing agents, polymers and imported waxes. Voodoo Wax Cleaner Polish rapidly cleans and removes fine and medium scratches, oxidization, water spots and environmental contaminates leaving a deep, rich luster and durable finish. Safe for clear coat and non-clear coat finishes, cleans and restores Lexan and Plexi-Glass. Voodoo Wax Cleaner Polish is the ideal companion product to use prior to Voodoo Wax Racing Formula. P/N 09-01594 ...........$16.95 Voodoo Wax Cleaner Polish contains the finest blends of ultra fine polishing agents, polymers and imported waxes. Voodoo Wax Cleaner Polish rapidly clans and removes fine and medium scratches, oxidization, water spots and environmental contaminated leaving a deep, rich luster and durable finish. Safe and clear coat and non-clear coat finishes. Cleans and restores Lexan and Plexiglass. Voodoo Wax Cleaner Polish is the ideal companion product to use prior to Voodoo Wax Racing Formula. P/N 09-01593...........$16.95
BRILLIANIZE
ACTION CHIPKIT
Just spray it on, let it work, and gently wipe off with a soft cloth. The surface is clean, protected and will be even easier to clean the next time! Now you can safely Clean and protect just about anything in your life that gets messy.Plastic surfaces, are found everywhere. Aircraft, autos, watercraft, kitchens, motorcycles, watches, and the list goes on. Once you clean the surface, Speed Clean leaves an invisible velvety smooth surface that helps dust and dirt from sticking to it. Cleaned surfaces will be static & dust free for weeks, and everything will be even easier to clean the next time. Available in a 2 oz. travel bottle of a 12 oz. bottle. 12 oz......P/N 09-01962 .....$12.75 2 oz. .... P/N 09-01962-2 .... $5.85
BUG & EXHAUST REMOVER - Bug Off is a presoak bug and exhaust remover designed to remove organic matter, bug juice, and engine exhaust soot from surfaces of aircraft, automobiles, and trucks. Bug Off dissolves most dried up bug matter and exhaust soot in seconds. It eliminates scrubbing and does not affect painted surfaces. 1 Qt. (Spray Bottle) .........................P/N 09-35710 ............ $9.75 1 Gal. Refill .....................................P/N 09-35712 .......... $22.50
BUG-OFF
401
Novus Plastic Polish #2 removes fine scratches, haziness, and abrasions from most plastics. With repeated use, it will restore faded and discolored plastics. Contains mild abrasives, but is non-toxic and has no strong odor. Creates a deep shine which resists scratching, marking, and aging. 8 oz.. ...... P/N 09-38120....... $6.50 64 oz.. .... P/N 09-38125..... $25.50 Novus No. 3 removes heavy scratches and abrasions from most acrylic surfaces. This is an aggressive polish and is not intended for use on coated plastics or polycarbonates. Requires both Novus No. 1 and No. 2 polishes for final finishing. 8 oz.. ...... P/N 09-38130....... $7.50 64 oz ...... P/N 09-02397..... $33.25
Plexus was developed for use in aviation, specifically for cleaning and protecting aircraft windshields and painted surfaces. Its quite simply the most effective product you can buy for cleaning, polishing and protecting all clear and colored plastics and painted surfaces. Plexus is easier to use, and leaves a noticeably cleaner, more lustrous finish than conventional polishes. It protects by actually sealing the pores in plastic making it more resistant to debris, oil, bugs or scratches. Because its anti-static, it repels dust and lint. Its perfect for windshields and the leading edges of the wings, as well as for removing exhaust stains and cleaning wheel wells. Also, Plexus polishes without harmful abrasives. It leaves an invisible, micro-thin layer of wax without smears or smudges. It dries to a crystal clear luster, leaving no oily, sticky or tacky residue. Its the ultimate detailer for your aircraft. So, if youre looking for a better way to save time, money and help protect your valuable investment, its clearly brilliant. Plexus. Clearly the best. Plexus contains no CFCs, so its safe for the environment. And because its an aerosol, there is virtually no waste. 7 Oz. Can ............. P/N 09-29715..........$15.25ea 13 Oz. Can .......... P/N 09-29710..........$17.85ea Removes grease, stains and insects. Retards fogging. Rain repellent, anti-static. Cleans Plexiglas, fiberglass, stainless steel and painted surfaces without scratching. #403D Pint Can ............................P/N 09-00344 ............ $7.75
No need to wash or prepare. Cleans, conditions and restores. Protects & beautifies. Removes dirt and stains. Excellent on tires. Protects against stains, soils, oils, salt and dirt. Unaffected by temperature, weather or sunlight. Prevents cracking and deterioration. 8 oz.. ...... P/N 09-42520..... $21.70 Is an eco-freindly, non-abrasive, non-flammable, non-yellowing, non-glare, static-free clear plastic cleaner and preservative, excellent for cleaning Mylar, Lexan, Plexiglas, AS-2, plastic windows and windshields on motorcycles, boats, aircraft, autos, formica and other structural plastics. 8 fl. oz. P/N 09-02549 ..................................$12.85
A superior no-wax, non-yellowing formula containing polyethylene poymers. This product not only gives a super slick surface to your windshield and windows, but can also be used on your entire aircraft, including all the painted gloss surfaces, aluminum & fiberglass. Ease of application and removal is unmatched. Sold in 16 oz. bottles. .....................P/N 09-42055 .......... $16.50 Sprayway plastic cleaner contains no chemicals or abrasives that will cause damage to transparent surfaces. This formula is anti-static, anti-fog, fast-drying, non-streaking, and it reduces glare. It also repels finger smudges, dirt, and dust. Great for use on acrylics, plexiglass, lexan, glass, and polycarbonates. No. 848 meets the following miitary and commercial specifications: MIL P5425 MIL P25690A Douglas Aircraft CSD-1 ANSI/ ASTM F484-77 Boeing Letter-Lexan 9600. Product is free of ozone-depleting chlorfluorocarbons (CFCs) P/N 09-42060 ............................. $8.50
Developed by an A&P and manufactured since 1993, Scratch Off has become the leading Plexiglas and Lexan restoration system worldwide and is guaranteed, when used as directed, to permanently improve the clarity of aircraft windows and windshields. Scratch-Off is being used worldwide and highly recommended by airframers, aircraft window/windshield manufactures and enthusiasts to restore optical clarity back to aircraft windshields and windows. The 8 panel instruction booklet walks you through a step by step process on how to determine where to start the process as all four steps are not always needed. Standard Kit ..............P/N 09-42600 .......... $36.75 Deluxe Kit .................P/N 09-00252 .......... $65.75 Please see our website for a complete list of all kit details. This is the original Poly-Sand process. Consists of a series of cloth-backed cushioned abrasives which when used in proper sequence will restore the finish of plastics. Also used for fine finishing of wood and precious metals. Recommended by Rohm & Haas Co., manufacturers of Plexiglas. Kit includes series of Poly-Sand cushioned abrasive cloth tapes, all required accessories and instructions. PCA Kit #40 ..............P/N 09-24800 ...........$26.75 Unigrit Finishing Papers & Sanding Blocks use precise, uniform grit particles to eliminate deep sanding scratches and the need for compounds. More economical to use because they work faster, last longer and wont load up as quickly as conventional sanding products. FINISHING PAPERS SANDING BLOCKS Sheet Part Price Block Part Price Grit Grit Size (in) No. Each Size (mm) No. Each 1000 5.5x9 09-23580 $2.95 1000 60x30x20 09-23640 $16.95 1200 5.5x9 09-23590 $0.91 1500 60x30x20 09-23650 $17.00 1500 5.5x9 09-23610 $0.79 2000 60x30x20 09-23660 $17.00 2000 5.5x9 09-23620 $0.96
Plexi-Clear is an anti-static aircraft plexiglass cleaner, protectant, and polish. Plexi-Clear produces a microscopic, high luster, soil retarding and water repellent finish to all aircraft plexiglass and plastic and makes small scratches less visible,leaving a surface that is fresh, lustrous, and protected. Plexi-Clear dries perfectly with no smears, no scratches, no smudges, no oily, tacky or sticky residue.Plexi-Clear can be applied in seconds, in one easy step. Boeing and MIL spec Approved. P/N 09-37960 ...... $12.95ea How much faster? In just a matter of minutes you can treat your entire airplane. You can coat paint, bare metal, composite and fabric surfaces. Windshields, glareshields and even your interior. Just a simple spray, wipe, hand buff and you are done. Your baby will not only shine but you will have added great UV protection as well as environmental protection. Dust, dirt, soot, bird droppings are easy to clean on a SpeedCoat protected airplane - David LoPresti Features * 16 oz Bottle * One bottle is more than enough to treat an average sized aircraft. * Long shelf life. * Environmentally friendly. * Silicone Free. * No residue buildup. * Hand only applications. * No mechanical buffing required. P/N 09-02107 ...........$37.80 WinBRIGHT is safe to use on any polycarbonate, acrylic, or plexiglass window. Developed for aircraft transparencies, but perfect for any plastic surface:AIRCRAFT, MOTORCYCLE WINDSCREENS, BOATS, AQUARIUMS, CONVERTIBLE WINDOWS, INSTRUMENT PANELS, BIMINI TOPS, SAFETY GLASSES, RVs, CDs This professional strength spray with Micro-Brighteners leaves surfaces sparkling clear and clean. Removes, dust, dirt, stains, smudges and finger prints. Optical clarity improves with extended use. Clean surface with water first, then simply spray WinBRITE onto a dampened flannel cloth and polish into the surface of the window until polish disappears. Contains no wax, solvents or ammonia and leaves no residue or build-up. 8OZ Spray ............ P/N 09-02079 ........$13.75
SPEEDCOAT
402
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A easy on and even easier off polish, wax and light hand glaze, all in one bottle. Deep cleans, deep shines, and gently removes light oxidation, fine scratches, buffer swirl marks. It's deep penetrating high gloss finish is safe on all windows, paint surfaces chrome trim and wheels. Repels dirt, bugs and even brake dust on aircraft and vehicle Sheds water like crazy. 16 oz. ................P/N 09-02436 ...........$14.95 Gallon ...............P/N 09-02437 ...........$68.75 When wax alone is not enough. Body Shop Safe - No wax or silicone. Can apply by hand. Deeply penetrates as it cleans, polishes, a controlled 1500 cut safely removes heavier oxidation, fine surface scratches, swirl marks and is an excellent color restorer.Follow with a coat of BootyWax Purple Glaze to Seal the Deal with an even deeper shine. 16 oz. ................P/N 09-02438 ...........$21.50 Gallon ...............P/N 09-02439 ...........$82.65
Deep cleans the way for a micro sanding-polishing action that waxes and seals itself all in one step saving you time and money. Great protection against all future harsh weather elements, sun, water lines, mildew, salt and river scum. 16 oz. ................P/N 09-02440 ...........$28.85 Gallon ...............P/N 09-02441 .........$156.50
A WashnWax concentrate that is a non-abrasive rich, sudsing formula fortified with the BootyWax to assure a great shine every time! A multi-purpose product that sheds water like crazy. 16 oz. ................P/N 09-02562 ...........$14.95 Gallon ...............P/N 09-02568 ...........$36.75
BOOTY WASH
CP/S CLEANERPOLISH/SEAL-COAT
Removes oxidation and dirt out of the paint layer and restores the original brilliance, color and gloss. Hard rubbing is not required. Is designed for a light pressure manual application. Can be applied in direct sun or on a hot surface, however, expect best performance when the surface is not hot to the touch. Proper application will provide the best results and will maximize the resin seal-coat. P/N 09-00784 ........................... $22.95
Thor Aircraft Concentrate is specifically formulated to dissolve the residue of exhaust, grease, dirt and oil. It is safe on all surfaces such as ferrous metals, aluminum, plastic. rubber, painted and unpainted surfaces. Also a non toxic, non-corrosive, non hazardous product. Use 1 to 2 quarts of product per 5 gal. of water, depending on how heavily soiled the aircraft is. P/N 09-02122 ................$15.65
This product is designed to be used when wet, this foam like material will safely scrub away bugs, bird droppings and any other contaminants. It can be used on Plexi-glass and all painted surfaces. P/N 09-00898 ..................$3.95
AEROSHELL FLIGHT JACKET POLISHES AND CLEANERS AEROSHELL FLIGHT JACKET POLISH - Frees leather
AEROSHELL FLIGHT JACKET PLEXICOAT - Increases visibility of aircraft windows. Protects Plexiglas and glass surfaces from UV yellowing and clouding. Removes and prevents light scratches. Commercial Aviation Certified. Contains no silicone. (16-oz. Bottle) P/N 09-00393 ................................. $12.95
of ground-in dirt. Works well on vinyl, plastic, & rubber. Contains no silicone. P/N 09-00392 ........................... $14.65
When you do not have access to water, this is the product for you. Simply spray it on and wipe it off. This unique product also has a polish in it to protect the painted surface. It also contains a corrosion inhibitor which protects the painted surface. Thor Aero Dry Wash is especially safe on plexiglass. 8oz. ...................P/N 09-01325 ............ $2.10
AEROSHELL FLIGHT JACKET OIL & EXHAUST REMOVER - Non-abrasive formula removes exhaust residue
without removing Aeroshell Flight Jacket Polish or damaging paint. Safe for all paint surfaces.16 oz P/N 09-00394 ............................. $8.25 AEROSHELL FLIGHT JACKET INTERIOR CLEANER - Flight Jacket Interior Cleaner frees leather of ground-in dirt and debris. Can also be used on interior trim surfaces including vinyl, plastic and rubber (not recommended for cloth). P/N 09-00395 ............................. $6.95
This a 10 foam block that is completely filled with a one threaded green nylon. This brush will effectively remove oil, grease, exhaust fumes, and other oily residues. 60 length metal handle not included, order separately.
Thor Aero Brush ....................P/N 09-00897 ....$13.75 Handle For Brush .................P/N 09-02097 ......$7.85
Moisturizes and protects leather and vinyl from wear and UV rays. Dries without leaving an oily residue. No messy overspray. Contains no silicone.(7.5-oz. Bottle) P/N 09-00396......................................$7.95
403
Cut through corrosion quickly, loosen stubborn nuts, and pentrate rust faster than the competition. Its formulated to adhere to surfaces and last longer, but because its greater than 90% bidegradable, its good for the environment too. 8 oz. Spray. P/N 09-03523 ..........$9.29
Mean, green, and made to clean. When you think of Grime Off, think stained bellies, hard to reach landing struts, engines, and deceased bugs. Available in a 12 oz. foaming aerosol spray, 16 oz. spray, or wipes-24ct. 12 oz. Spray Foam .........................P/N 09-03507 ..........$9.29 16 oz. Aersol ..................................P/N 09-03508 ........$13.29 24 Pack of Wipes ...........................P/N 09-03509 ........$14.59
Fix squeaks and creaks in minutes with LubFix, a long-lasting green formulation with the staying power to outlast heavy usage on door and air stair hinges, gear, flaps, and ailerons. LubFix will lift it right off. A safe, effective alternative to petroleum-based lubes and greater than 90% biodegradable. 8 oz Spray. P/N 09-03526 ..........$9.29
FBO sized pail, these are perfect for removing bugs and exhaust stains. Your techs need to keep their hands clean and grease free. This is the solution. It is easy to pull out a wipe, do the job, and discard it. No dealing with rags or paper towels. Continental and American Airlines buy these in the 75 wipe buckets and go through pallets of them. 75 Pack of Wipes ..................P/N 09-03511 ........$46.59 5 Gallon .................................P/N 09-03513 ......$132.99 55 Gallon ...............................P/N 09-03514 ...$1,264.99
Made from 100% soy beans harvested between Americas shores, it is the toughest non-toxic cleaner and lubricant available. Simply Soys 100% biodegradable formula cuts through commercial-grade corrosion and rust. Lub Fix is completely safe for food areas, child, pe, and food environments. 8 oz Spray. P/N 09-03527 ..........$9.29 Made from a solvent-free, environmentally safe formula, Gas Off extra-large, 100% biodegradable wipes thoroughly suspend and absorb smells from your hands, power tools, clothing, and more. Continental Airlines mechanics swear by them, as do the mechanics at my FBO before breaks, meals, and climbing into my plane. Throw a couple of these in your flight bag. 12 Pack of Wipes ...........................P/N 09-03522 ........$17.29 24 Pack of Wipes ...........................P/N 09-03521 ........$14.59
Line of sight in an airplane is critical. You dont want to trust your windshield to just any cleaner that may leave a haze. When you need something that will do the job and leave a streak-free clean, trust Grime Off Windshield Cleaning Spray & Wipes. They cut through grease and grime and leave both plastic and glass surfaces streak and residue free. 24 Pack of Wipes ...................P/N 09-03517 ........$13.29 oz. Spray ...............................P/N 09-03518 ........$13.29
After removing bugs and grime with a De-Ice Boot Cleaning Wipe, restore the boots luster with a quick coating of Simply Soy applied with a De-Ice Boot Conditioning Wipe. Features: Large 7x12 Durable Cotton Wipes Certified to Boeing D6-17487 pH neutral 100% biodegradeable 100% non-toxic; inhalation, ingestion, dermal Zero VOCs volatile organic compounds Made in the USA. 24 each. P/N 09-03515 ........$14.59
Simply Soy De-Ice Boot Conditioning Wipes contain a soybased formulation which thoroughly conditions and restores rubber de-icing boots and tires. After removing bugs and grime with a De-Ice Boot Cleaning Wipe, restore the boots luster with a quick coating of Simply Soy applied with a De-Ice Boot Conditioning Wipe. This wipe will add a nice protective layer that also makes it more difficult for the next round of bugs to adhere to the boot. 24 each. .........P/N 09-03516 ........$14.59 This is the perfect utility foamer for any small job, anywhere around the house, the farm, the shop or the work site. Just add the diluted chemical or soap, pump it up and youre good to go! The Lafferty Pump Up Foamer creates a rich, clinging foam that adheres to the surface longer to put an extra kick into your cleaning! Its great for the car wash / detailing shop for pre-soaks, bug & tar solutions, wheel & tire cleaners and lawn & garden. Its portable so it works anywhere you can go. 1.5 Gallon ............................P/N 09-03528 ........$80.99 3.0 Gallon ............................P/N 09-03529 ......$102.99
Remove over 95% of the most common stains in carpets and upholstery with Green Carpet, according to the Carpet & Rug institute. Green Carpet has none of the hazardous chemicals present in other commercial solutions, which we find particularly inviting with the relative tight quarters and limited ventilation typical of most aircraft. 12 oz. Foaming Aerosol. P/N 09-03519 ..........$9.29
This biodegradable, non-toxic brake cleaner is the safe alternative to what is currently on the market. It quickly removes brake fluid, grease and oil without the hazardous vapors of existing products. This non-chlorinated, non-flammable product is tough on the things it needs to be tough on, while being gentle on users. 12 oz. Spray ...........P/N 09-03525 ..........$9.29
Adjustable spray nozzle. Great for indoor and outdoor watering. Wide mouth for easy filling. Comfortable grip handle and thumb trigger. Viton O-rings. Translucent tank for easy view of product level. Applications: carpet spot cleaning, restroom cleaning and car washes. Unique nozzle which produces smooth, thick foam with foaming product. Easily converts to regular spray nozzle. 64 oz capacity. ........P/N 09-03536 ........$44.99 Features: Cover 500 ft2 in 2 1/2 minutes 16 minutes foaming time per 20 gallons of chemical solution Up to 12 ft. usable foam throw distance Wall Mount model requires external chemical solution tank Tanks hold RTU chemical solution Includes: Lockable, stainless steel enclosure Stainless steel cart with stainless steel casters High density polyethylene tanks Yamada pump with Teflon diaphragms Machined polypropylene foamer body Discharge hose, stainless steel ball valve, foam wand and fan nozzle 20 Gallon. 2 Wheel......... P/N 09-03531 .............$1,357.99 20 Gallon. 4 Wheel......... P/N 09-03535 .............$1,529.99
Dont just protect it from rust and corrosion, Shield It with this advanced rust prevention and anti-corrosion lubricant. We all fight corrosion in our aircraft. Shield It is the answer. Safe for almost all surfaces including wood, glass, vinyl, metal and plastics not under stress. Shield It evaporates to leave a long-lasting dry film. Greater than 90% biodegradable. 7.5 oz spray. ....................P/N 09-03524 ..........$9.29
404
ALL KLEER
A special blend of natural ingredients and a chemical formulation called SUPPLEXIN which is designed to beautify, soften, deodorize, preserve, and protect against damaging agents found in the everyday usage of your vehicles interior. This product cleans, conditions, preserves, and protects in one easy step. Contains no harmful silicons, or adverse active ingredients. Blocks harmful UV rays. 12oz. .......P/N 09-01056 .........$27.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The convenient 13-ounce can is ideal for use on acrylic, stretched acrylic, poly carbonate, glass, and coated glass. It may also be used for cleaning many other sources including aircraft interiors, goggles, helmets, lenses, and plastic and metal surfaces. Prist cleaner contains no abrasive cleaning agents and cleans without scratching glass or plastic surfaces. This prevents scratches in acrylic windshields that necessitate costly replacement. Unlike other cleaners, Prist cleaner dispenses as foam and leaves no residue. The cleaning agent soaks into the dirt, grease and insects to remove them with minimum effort. Suitable for interior and exterior cleaning, Prist cleaner prevents static charge buildup with regular use. 13oz. Can ............... P/N 09-02049 ............$5.95 Case (12 Cans) ...... P/N 09-02049-1.......$77.25 Put a coat of Pilots View Polish on your aircraft windshield and Improve your vision up to 300% in the rain. This product will shed the rain in a huge way! Ideal for GPS, Avionics, Plexiglas Windows and much more! This Product Will Not Scratch Anything! Safe on: Eyeglass/Sunglass lenses, Anti-reflective, protective-coated and shaded lenses, sun visors and plexi windshields 1 oz. Spray ........................ P/N 09-01583...................$3.90 27 oz. Sprayer ................... P/N 09-01584...................$7.95 Kit (27 oz. Sprayer / 1 oz. Spray).......... P/N 09-01585.................$10.95 A non-stick high-gloss all-weather sealant. The finest polish for your car, airplane, boat, motorcycle, glass, stainless steel, fiberglass, chrome, Carbon Graphite, and RV in the worlds market. Filters out UV Rays, turns to glass on and within your paint. Contains Glassplexin. Bonds molecularly to your paint. The most revolutionary polish ever developed. Beyond 22nd century technology. Lasts up to five years. 12oz. P/N 09-01055 ........................... $27.50 Another innovation of Ultra 2000 MFG Intl, Inc. Beyond 22nd century technology. GLARE Spider is the most advanced swirl, spider web, and scratch removal product in the market. Ultra high purity metal interlinked fusion of glass particles to Glassplexin forming a unique highly advanced swirl mark remover polish. GLARE Spider fills in permanently, it is NOT a temporary solution - not found anywhere. 12oz. ....... P/N 09-01061 .........$26.75
PRIST ACRYLIC, PLASTIC AND GLASS CLEANER: FOR ALL TYPE OF WINDOWS
The Clay Bar in a Bottle. Smoothes and removes stubborn blemishes before polishing! Wont rescratch your paint like a regular Clay Bar. Fast and very easy to use. The MOST advanced claying system for your vehicles finish ever developed! Restores Color Picks up Debris. Fallout, Insects, & Dirt Particles like a Magnet! Smoothes paint like glass Preps paint before polishing 12oz. ........P/N 09-01059 ...........$23.50
GLARE LIQUI-CLAY
The ultimate all in one tire appearance protection product! Glare Tire Magic will filter out harmful Ultra Violet Rays from the sun. Extreme temperature resistant formula for all climates. Stops tires from cracking and fading. Gives a beautiful rich natural high gloss finish. Splatter resistant formula. Easy to use - just spray and wipe! 16 oz. ...... P/N 09-01058 .........$10.50
Restores all paints, removes & reverses oxidation, and fills in scratches. Glassplexin actually fills in the surface scratches and reverses oxidation to bring the painted surfaces to a new level of beauty not available with any other compounds. One step compound: NO WAX! NO SILICONE! NO POLYMER! Great for all clear coats Easy to apply. Works quickly! Saves time! Removes swirl marks from all paint including clear coats Preps paint with the most advanced ingredient - Glassplexin 12 oz. .......P/N 09-01064 ...........$23.25
GLARE SPIDER
Glare Turbo Action Wheel Cleaner is the most powerful, effective, & fastest working wheel cleaner on the market. Safe for ALL types of wheels - Aluminum, Chrome, Magnesium - as well as clear coated & painted wheels. Makes your wheels look show room bright and shiny the easy and safe way. Removes and dissolves dirt, grime, brake dust, and grease. Spray on Glare Turbo Action Wheel Cleaner to dirty wheels & hose off with clean water to get your wheels looking like new again! 16oz. ....... P/N 09-01063 .........$8.75
Ultimate protection for Cars, Planes, Boats, Motorcycles, Fiberglass, Plastic, Stainless Steel, Chrome, Carbon Graphite & Polished Aluminum. Now in a convinient and easy to use spray formula. Contains Glassplexin and lasts up to six months. Bonds molecularly to your paint. The most exciting polish ever developed. Beyond 22nd century technology. P/N 09-01057 ........................... $23.75 Cleans your vehicle, keeps your shine. The most advanced wash ever developed. A PH balanced concentrated wash. Safe for all paints and finishes including the new clear-coated paints. New technology that leaves your vehicle clean and glossy like no other vehicle wash can. Contains Glasplexin. 12oz. ................P/N 09-01062 ..................$11.50
GLARE Professional Polish A nonstick high-gloss all-weather sealant. The finest polish for your car, airplane, boat, motorcycle, glass, stainless steel, fiberglass, chrome, Carbon Graphite, & RV in the worlds market. Filters out UV Rays, turns to glass on and within your paint. Contains Glassplexin. Bonds molecularly to your paint. The most revolutionary polish ever developed. Beyond 22nd century technol-
ogy. Lasts up to 5 years. GLARE Micro-Finish We burn out the competition. A nonstick high-gloss all-weather sealant that lets paint breathe. Contains Glassplexin. Ultimate scratch and oxidation remocoval for Cars, Planes, Boats, Motorcycles, Fiberglass, Plastic, Stainless Steel, Chrome & Polished aluminum. For use with GLARE Professional Polish. GLARE Ultra Wash Cleans your vehicle & keeps your shine The most advanced wash ever developed. A PH balanced concentrated wash. Safe for all paints and finishes including the new clear-coated paints. New technology that leaves your vehicle clean and glossy like no other vehicle wash can. Contains Glasplexin . Glare Micro Finish - 12 oz. ..........................P/N 09-02362 .......... $26.95 Glare Micro Finish - Gallon .........................P/N 09-01065 ........ $237.95 Glare Pro Polish - Gallon ............................P/N 09-01066 ........ $237.95 Glare Ultra Wash - Gallon ...........................P/N 09-01060 ........ $105.95
405
MICRO-GLOSS POLISH
Micro-Surface Finishing Products, Inc. FAA Repair station #KY2R969K, has been a leader in acrylic restoral for the past 30 years. The following kits were developed for use with standard power tools. Micro-Mesh is approved by Boeing/McDonnell Douglas, the Military and FAA. All kits come with easy to read instructions. Designed to save you both money and time, these kits will restore acrylic back to optical clarity using a minimum of steps. Re-order individual components as you need them. All kits restore up to 100 sq. ft. MAINTENANCE KIT - Remove scratches, halos and haze. 5 White Foam Sponge Pad. 5 TufBuf, All Natural Lambswool Polishing Pad. 5 Back-up Pad. 8 Ounce Bottle Micro-Gloss. 8 Ounce Bottle Anti-Static Cream. 2 Cotton Flannel P/N 09-24715 ..................$69.85 LIGHT DAMAGE REMOVAL KIT - Remove minor scratches and scuff. 2-5 Loop Back Discs, Micro-Mesh 1500, 2-5 Loop Back Discs, Micro-Mesh 2400, 2-5 Loop Back Discs, Micro-Mesh 3600, 5 White Foam Sponge Pad, 5 TufBuf All Natural Lambswool Polishing Pad, 5 Back-up Pad, 8 Ounce Bottle Micro-Gloss, 8 Ounce Bottle Anti-Static Cream 2 Cotton Flannel P/N 09-24720 ..................$97.50 HEAVY DAMAGE REMOVAL KIT - Remove crazing, scratches, and gouges. 5-5 Loop Back Discs, Wet/Dry 120 Grit, 5-5 Loop Back Discs, Wet/Dry 220 Grit, 5-5 Loop Back Discs, Wet/Dry 400 Grit, 2-5 Loop Back Discs, Micro-Mesh 1500, 2-5 Loop Back Discs, Micro-Mesh 2400, 2-5 Loop Back Discs, Micro-Mesh 3600, 5 White Foam Sponge Pad, 5 TufBuf All Natural Lambswool Polishing Pad, 5 Back-up Pad, 8 Ounce Bottle Micro-Gloss, 8 Ounce Bottle Anti-Static Cream, 2 Cotton Flannel P/N 09-24725 ................$104.95
This unique formula is custom blended to clean and rejuvenate fine leather surfaces. Leather Cleaner with Conditioner features a unique protective barrier that, when used regularly, helps to prevent soiling from stains such as dirt, grease, ink, grime and body oils. P/N 09-02120 .................. $17.95 This unique formula is custom blended to clean and rejuvenate fine leather surfaces. Leather Cleaner with Conditioner features a unique protective barrier that, when used regularly, helps to prevent soiling from stains such as dirt, grease, ink, grime and body oils. 16 oz. P/N 09-02121 .................. $18.75 Perrone Ink Remover will help to effectively remove most ink and highlighter stains from finished leather surfaces. Removes lipstick and other stains quickly and effectively. Will not harm the finish system of finished leather. 2oz P/N 09-02122 .................. $11.75
LEATHER CONDITIONER
INK REMOVER
Excellent for restoring polycarbonate such as Lexan on aircraft, boats, cars, & motorcycles. Will restore up to 100 square feet material. Kit includes: 5 disc w/ loop 2400 MicroMesh 5 disc w/loop 3600 MicroMesh
5 random orbital or drill back-up pad 5x 3/4 TufBuf lambswool polishing pad (2)11.5x 12 flannel sheets Instructions 5 white sponge pad 8 oz. Micro-Gloss #5 8 oz. Micro-Gloss 8 oz. Final Finish
Specifically designed for leather cleaning, Perrones Leather Cleaning Brushes dig out tough soils and stains from the pores of natural and corrected grained leather. For best results use in conjunction with Perrones cleaning products. Can also be used for suede and nubuck. Sturdy Wood Block with 3-1/2x2 Bristle Bed P/N 09-02123 .................. $18.90
PLEXIGLASS LENSE REPAIR KIT - Removes crazing, scratches, scuffs, and haze from navigation light lenses, recognition light lenses and landing light lenses. Not necessary to remove lense to restore to optical clarity. PN 09-02171 ....................$13.50 SCRATCH AWAY HEADLIGHT RESTORE KIT - This
kit will remove haze, cloudiness, and light scratches. Process will resurface the lense rather than fill in scratches. Once the process is complete, damage will not return. This is a spot repair kit. We also have larger kits available. PN 09-02170 ....................$14.95
P/N 09-00490 .....................$91.50 This kit is designed for craftsmen for use in hand finishing applications and without the mess of steel wool, rottenstone or pumice. MicroMesh may be used on bare or finished wood with wet or dry application method. A high reflective finish, satin or matte finish can be achieved, depending on how many MicroMesh steps are completed. This makes it an excellent product for spot matching of finishes. P/N 09-24705 ...........$38.50 Protect your investment by restoring crazed, scratched, hazy lenses. Perfect for recognition light lenses, navigation light lenses, and landing light lenses. Lenses can be restored on the plane without removal. Soft Touch pads in this kit fit nicely in your hand and allow you to polish both concave and convex surfaces with ease. Dry pads, store and reuse again and again. P/N 09-01603 ..............$11.95
ACRYLIC HEADLIGHT LENSE RESTORATION KIT - Easy to use double sided MICRO-MESH SOFT
TOUCH PADS make removing cloudiness and haze from lenses, lense covers, tail lights, tail light blackouts, and bug deflectors a snap! Each kits contains: 3 IN. x 4 IN. double sided pads in 120/220, 400/1500, 2400/3600, 4000/12000, 1 oz. bottle MICRO-GLOSS liquid abrasive, and 2 cotton flannel cloths. Clean, dry, and reuse over and over - A FANTASTIC VALUE! PN 09-02172 ....................$32.75
406
CLEANERS POLISHES
Specifically developed for aircraft windshields. Flight Bright CLEAR provides optimum visibility without harming the windshield or paint. Features: Easy to use Streak-free Anti-static Non-abrasive Prolongs windshield lifespan NonYellowing Formulation 2.5 oz. ......................P/N 09-00792 .............$2.85 22 oz. ........................P/N 09-00793 ...........$16.50
Provides long-term protection and an impressive high gloss finish. No wax or free silicones. Safe for all types of paints, clear coats, graphics, fiberglass and plexiglass. Features: Easy to apply High gloss finish Leaves no white powdery residue Acid rain and sun fading protection. P/N 09-00794 .................................................. $15.95 Arrival Metal Polish is a first-class liquid polish designed to give your aircraft a premium shine in no time. It is the ultimate polish for the restoration and maintenance of unpainted metals. Arrival also works great in the removal of rust and oxidation. P/N 09-01090 ..............................................$13.75 Flight Bright ILSTM uses a gentle balance of moisturizers and lanolin oils to nourish, preserve and enhance fine leather. With regular use, this conditioning cream penetrates and softens leather to prevent dryness and cracking. Yellow application sponge included. Features: Moisturizes Nourishes Softens P/N 09-00802 .............................. $8.95
Driven Marine Polish is the most highly advanced formulation of premium grade polymer polish on the planet. Sheeting action reduces water spots that wipe clean. Nothing sticks. Harmful elements cant bite in. Easy to apply in sun or shade. Super high gloss wet look with incredible depth & clarity. Long lasting. Holds up under intense heat from sun and severe winter cold for up to one full year. Maximum U.V. inhibitors prevent sun damage. Excellent for use on aircraft. P/N 09-00777 ................. $18.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Driven Premium Polymer Wash safely cleans all automotive and marine finishes without stripping polish or wax. Activated by water, this unique combination of cleaning agents foams away surface contaminants while brightening and nourishing the finish with a full spectrum of protective polymers. Biodegradable. pH balanced. Safe for clear coat and fiberglass gel coat. Super concentrate provides more washes per bottle. Sheeting action is highly effective in the reduction of hard water spots. Rich foamy lather.Will not streak. Brightens and extendspolish protection and shine. Excellent for use on aircraft. P/N 09-00780 .......... $15.00
PRE-FLIGHT WASH
(CONCENTRATE)
Highly concentrated, commercial-strength, gloss-enhancing wash. Contains no acids, silicones, waxes or damaging sodium chloride. Its thick foaming action delivers a thorough but gentle cleansing for any aircraft. Features: Will not remove polish Non-abrasive Streak-free rinsing Quick drying Wash .........................P/N 09-00803 ...........$10.50 Gallon........................P/N 09-00804 ...........$63.75 Specially formulated to remove exhaust and oil from airplanes. Quickly cuts through carbon & grease. Solventfree, causticfree GEAR-UP removes stains and ink from fine leather, upholstery & carpets. Features: Cuts through grease & oil in seconds Non-corrosive Solvent-free. 2.5 oz. ..... P/N 09-00795 .............$2.50 22 oz. ...... P/N 09-00796 ...........$14.50 1 Gallon .. P/N 09-00797 ...........$68.75 Specially formulated to soften and neutralize the acidic proteins found in bugs. TAKE-OFF safely removes bug residue without removing polish or damaging paint, clear coat, glass, plastic, metals & chrome. Features: Powerful & effective Will not remove polish Excellent spot cleaner for bugs inbetween regular washings Ready-to-use as a presoak for bugs before washing 2.5 oz ........................P/N 09-00805 .............$2.50 22 oz. ........................P/N 09-00806 ...........$14.50 1 Gallon ....................P/N 09-00807 ...........$68.75
The ever-popular A2Z thick foam formula safely removes brake dust, grime and grease. Easy-to-use (spray on, hose off), no scrubbing required. Acid-free - Safe for ALL types of wheels, hubcaps and tires. Tip: Make sure your wheels and tires are cool to the touch before applying and clean one wheel/tire at a time. For extremely dirty wheels/tires, agitate with a soft sponge or brush. P/N 10-04938 ............ $6.75
M-Ron Glass is not your ordinary wax. It is a CLEANER & WAX so you are not waxing over a dirty surface or getting a waxy build up. Thats why M-Ron Glass gives you such an AMAZING SHINE! Because of how this works, it is recommended that once applied; let it sit and bake in the sun for 15 to 30 minutes. You will get a deeper shine and a higher luster than you would if you were to apply it and take it off right away. It will NEVER bake itself to the surface! 12 oz.........................P/N 09-03483 .......... $15.95
Spray Shine was designed for the finest of finishes, car show enthusiasts, new car dealers and people who really like to take care of their vehicles. Just a quick spray and wipe will give your ride a complete new shine! Use Spray Shine on paint, glass, chrome, plastic, tile, lamps stoves, refrigerators, microwaves, mirrors, computer screens, etc. Spray Shine will give a high gloss surface an amazing CLOUD FREE SHINE! 16 oz.........................P/N 09-03485 .......... $10.95
Gives your aircraft that just-polished, slippery feel and highgloss wet-look! Fast and easy to use. Petroleum-free, silicone- free, Flight Bright GO-AROUND safely removes dust, bugs and mild grime. Features: Wont scratch, streak or smear Anti-static gloss enhancer Leaves no oily film 2.5 oz. ..........P/N 09-00798 ...... $2.50 22 oz ............P/N 09-00799 .... $16.50 1 Gallon .......P/N 09-00801 .... $73.50
LVC Leather Vinyl Conditioner is a non-greasy conditioner designed for interior use but also works great for keeping leather or vinyl roofs or covers looking and feeling like new. LVC is a mild cleaner but a serious conditioner that allows the leather to breathe, and actually does help to protect leather and vinyl from the elements, keeping them SOFT and SUPPLE with NO GREASY FILM! 8 oz...........................P/N 09-03484 ............ $6.95
The complete Flight Line Kit comes with a custom-made, compartmentalized, easy-access, leak-proof gear bag. Each of the following Flight Bright products are included: *CLEAR Windshield Cleaner *FINAL APPROACH Polish & Sealant *GEARUP Exhaust & Oil Remover *GO-AROUND Waterless Wash & Detailer *ILS Interior Leather System *PRE-FLIGHT Wash Concentrate *TAKE-OFF Bug Remover *AIRCRAFT WINDSHIELD WIPES *ANTI-STATIC HAND PAD * MULTIFIBER POLISHING CLOTH *ARRIVAL METAL POLISH *Also included is a Flight Bright T-Shirt. P/N 09-00808 ........................... $115.95
407
TRI-GUARD
Liquid Carnauba Wax the ultimate in shine, durability and protection. Liquid Carnauba Wax will safely protect your finish from the effects of insect stains, acid rain, engine exhaust and other finish eaters. Our unique formula Liquid Carnauba Wax contains the highest-grade #1 yellow carnauba wax the best in the world! The special ingredients are designed to protect and preserve all aircraft finishes, including clearcoats. Its easy-on, easy-off application is a plus. For use on newer finishes. P/N 09-02020 ........................... $18.75
To ensure the most effective results, proper preparation is key. Tri-Guard Prep Cleaner is formulated for use before each application of Tri-Guard De-Ice Boot Protectant. It effectively cleans the de-ice boot of all old boot treatments, ensuring the best results. 16 oz. ..................... 09-02030 .................... $14.95 1 Gallon.................. 09-02031 .................... $69.95
Rejuvenating Liquid Carnauba Wax restores oxidized finishes to their original beauty. Our rejuvenating wax contains the same rich ingredients as Liquid Carnauba Wax with the addition of a mild rejuvenating polish. In one easy step, Liquid Carnauba Rejuvenating Wax safely strips away oxidation from old painted surfaces. The result: a polished gleam that lasts. Carnauba doesnt leave a buildup of wax because you apply it with one thin coat. It goes on and wipes off with ease. For use on finishes that have oxidation P/N 09-02021 ..........................$20.80 Wash Wax Mop Kit: ALL you need to get started with the New Waterless Wash Wax Mop. The Wash Wax Mop was specifically designed for aircraft and is the only mop with two sides. One wet and one dry. Now you can waterless wash and wax with the reach and leverage of an extension pole. This allows you to clean a much larger area faster and with less effort, all from the safety of the ground. No ladder needed. Customers report time savings up to 50% over waterless hand application. Simply spray Wash Wax ALL on the Wet Side of the mop, wipe the aircraft with the wet side, flip the mop over, and wipe dry with the dry side. Includes: (1) Mop head with two (2) Microfiber Mop pads , (1) Deluxe Mop Pole, (1) Pack of four (4) Microfiber Mop pads, (1) Pack of four (4) Aero Towels (1) Gallon of Wash Wax ALL, (1) 16oz spray bottle, (1) 16oz Wash Wax ALL (Degreaser), (1) Aero Scrubber Pad with Handle and an Aero Bag to store and carry the kit. Wash Wax Mop Kit ........................................... P/N 09-03502 ... $414.28 Replacement Waterless Mop Pads (4) ............. P/N 09-03503 ..... $29.95 Dend is a technologically advanced cleaner that has been developed for the discriminating owner and professional. This specially formulated cleaner, with a wax component can be used as a wet-wash or a dry-wash application. And because of the built-in rinsing agent in Dend, if the product dries on the surface, simply re-apply and buff to a shine. This aviation-approved product is safe for the environment and offers a great value because it is shipped in a concentrate. This means you add the water and lower the per gallon price. Dilute 50 to 1 or 40 to 1. Dend is biodegradable, non-toxic, non-flammable and contains no phosphates, silicone or Teflon 4 oz. ............................................. P/N 09-03443............................ $9.95 Quart............................................ P/N 09-03444.......................... $56.25 Gallon .......................................... P/N 09-03445........................ $169.75 5 Gallon ....................................... P/N 09-03446........................ $566.95
Formulated specifically for aircraft finishes. Aero Surface Wash quickly penetrates and loosens oil and grease without stripping the wax. Its advanced, highly concentrated cleaning formula cuts through stains, dirt and acid rain. It revives colors and dries without streaking or spotting. Gentle, yet effective, Aero Surface Wash is safe for all aircraft exteriors. 16 oz. ................ 09-02014......................$10.80 1 Gallon ............ 09-02039......................$45.95
One of our best sellers! Cleaning gel formulated for acrylic windshields. Unlike other window cleaners, Windshield Gel doesnt streak or leave a residue. Windshield Gels unique blend of ingredients penetrates and lifts dirt allowing a clean wipe off and a sparking, streak-free finish. It cleans, shines, and protects without scratching. Safe on all surfaces. Its antistatic qualities and excellent vertical cling are specially formulated for acrylic windshields. 16oz. ................. 09-02017 ................. $18.50 1 Gallon ............ 09-02018 ................. $62.95
WINDSHIELD GEL
The Proper Aircraft Window Polish removes fine scratches and helps restore clarity to aircraft windows. Manufactured to meet milspec PP560B specifications, Aircraft Window Polish is safe and effective for use on all acrylic aircraft windows. It removes cumulative surface soils, produces a smooth, lustrous finish and is nontoxic, antistatic and noncorrosive to adjoining aluminum surfaces. Simply apply the polish, let dry, and wipe it off. The results? Clear, clean, residue-free windows. P/N 09-02019............................ $10.80
WINDOW POLISH
PermaShine is designed to protect new textured plastics from fading and to restore the appearance of faded textured plastics. PermaShine will provide permanent protection and gloss enhancement for textured TPO plastics, and it sticks so well that a pressure washer cannot blow it off. PermaShine can be applied by spray gun or roller for added convenience. Features: There is nothing else on the market that works like PermaShine - it is totally unique. Permanently restores the appearance of faded textured plastics; not the quick-fading shine that silicone dressing provide. PermaShine's adhesion to textured plastic is so good that it cannot be blasted off with a pressure washer. 11OZ Aerosol ...............................P/N 09-02408 ..........................$21.50 Quart.............................................P/N 09-02407 ..........................$59.95 Gallon ...........................................P/N 09-02406 ........................$199.95
408
Removes hard water spots from paint, gelcoat, plastic, chrome, aluminum and stainless. Clear Coat safe, waterbased. To prevent water spots, use Wash Wax ALL. Use Aero Scrubber to softly scrub without scratching. Pint ........................P/N 09-00507 ..................$8.50 1/2 Gallon..............P/N 09-02523 ................$18.00 Polish ALL is an easy-on, easy-off, liquid finishing polish. It will remove oxidation and fine scratches from paint, plastic (Aircraft Windows), aluminum, and other metals. Polish ALL can be applied by hand or with a power polisher. Keep the finish clean and protected after polishing by applying Wash Wax ALL. 8 oz. ......................P/N 09-00508 ................$12.95 1/2 Gallon..............P/N 09-02524 ................$43.85 Safely removes surface contaminants such as over spray, tree sap, Acid Rain & Rail Dust allowing wax to bond better. Use on paint, plastic, glass, chrome, gel coat and other surfaces. For use on aircraft, RVs, cars, boats, and motorcycles. 2 oz. ......................P/N 09-00512 ................$19.95 The Aero Scrubber is a soft, non-scratching, long-lasting, reusable scrubber pad. Use with Wash Wax ALL to help remove bugs from leading edges or use with Wash Wax ALL (Degreaser) or Belly Wash on tough cleaning jobs such as aircraft bellies, engine areas, wheels and tires. Pack of 5 Pads ......P/N 09-00509 ..................$7.95 Scrubber Kit - Includes 4 pads and one holder P/N 09-01616 ................$19.95 Aero Towels are an All purpose reusable Microfiber towel. Super soft, absorbent, long-lasting and lintfree. The best towel for all of your aircraft cleaning needs. Four (4) washable 16x16 Aero Towels per package4 pack .........P/N 09-00510 ..................$8.50 AeroDiapers are soft, absorbent, lint-free, 100% cotton 1-ply diaper for all your cleaning and polishing needs. 12 washable 16x18 Aero Diapers per package ...........................P/N 09-00511 ................$27.95 ALL you need to get started with Wash Wax ALL Kit includes: 16oz Wash Wax ALL, 16oz Wash Wax ALL (Degreaser), 4oz Belly Wash, Aero Scrubber Pad , Package of 4 Aero Towels Starter Kit ................P/N 09-00513 ................$39.95 The Leather Vinyl Care Kit is ALL you need to clean, restore, and protect leather and vinyl in one kit. Kit Includes: one 16oz Leather Soap, one 16oz Leather Care, one package of 4 Aero Towels, one mini Aero Scrubber, and a 4oz Wash Wax ALL.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AERO SCRUBBER
AERO TOWELS
AERO DIAPER
All you need to get those stubborn bugs and hard to clean bellies looking new again. The Aeroscrubber Bug and Belly Kit includes two soft, non-scratching, long-lasting, reusable Aero Scrubber pads, an Aero Scrubber handle, 4oz Wash Wax ALL, 4oz Belly Wash and two Micro Fiber Aero Towels. Bug and Belly Kit ...........P/N 09-01616 ................$19.95 4 of our most popular products packaged to fit in your glove box. Kit includes: 4oz Wash Wax ALL, 4oz Wash Wax ALL (Degreaser), One Aero Towel and a mini Aero Scrubber. Travel Kit ................P/N 09-00515 ..................$9.95
TRAVEL KIT
The Wash Wax Mop was specifically designed for aircraft and is the only mop with two sides. One wet and one dry. Now you can waterless wash and wax with the reach and leverage of an extension pole. This allows you to clean a much larger area faster and with less effort, all from the safety of the ground. No ladder needed. Customers report time savings up to 50% over waterless hand application. Simply spray Wash Wax ALL on the Wet Side of the mop, wipe the aircraft with the wet side, flip the mop over, and wipe dry with the dry side. Wash Wax Mop.......................................P/N 09-02526 ................$99.75 Mop Pads (Pack of 4) .............................P/N 09-02527 ................$21.50 Mop Scrubber ( 1 each) ..........................P/N 09-02528 ................$29.95 Mop All - a multi surface floor and glass cleaner that is formulated to be used with the Wash Wax Mop. Safe to use on all floor types.
409
Aircraft Carpet and Upholstery Stain Remover is a powerful stain and spot remover. Will remove stains caused by grease, dirt, wine, coffee, juice, soft drinks, tea, food and more. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-02658 ........... $15.50
Quick Turn keeps aircraft looking just waxed. Will remove harmful contaminants before they damage aircraft surfaces. Use Quick Turn between flights or as often as needed when wet washing or waxing is not required. Product is safe for use on exterior painted surfaces, polished aluminum and de-ice boots. Not intended for interior use. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-02657 ........... $22.95
QUICKTURN
Ultra Magnum is a non-corrosive, heavy duty alkaline cleaner designed to remove carbon, oil and bugs from aircraft exterior painted surfaces. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-03478 ........... $17.75
Microfiber Detailing Cloths make cleaning your aircraft easy, inside and out. These scratch and lint free cloths work well on aircraft instrumentation, windows, gauges, screens, painted and unpainted surfaces. Can also be used for applying and removing Cessna Detailing Products on aircraft surfaces. The multi-dimensionally knit fabric will not unweave or wear out, but due to the quantity of dirt lifted and trapped, the cloths should be frequently machine washed. The cloths will withstand several hundred washings with standard laundry detergents. Terry cloth applicators are used for applying wax and cleaning leather seats. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-02660 ........... $15.25
Carry all of your JetStream Aviation Products cleaners and accessories in this convenient and stylish bag. P/N 09-02662 ........... $65.00
Plexiclear is an aircraft Plexiglass cleaner, protectant and polish. Produces a high luster, soil retarding and water repellant finish to aircraft Plexiglass, leaving a lustrous surface. Will dry with no smears, smudges or oily residue. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-02712 ........... $12.95
PLEXICLEAR CLEANER
Will effectively clean, condition and preserve the beauty of new and worn leather. Will not bleed onto fabric. Contains no silicone or heavy waxes that can damage stitching or become slippery. This Cessna detailing product has been approved by Cessna Aircraft Company. It has been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning product that is among the best in the industry. P/N 09-02659 ........... $14.75
This Cessna detailing kit has been approved by Cessna Aircraft Company. The products provided in the Aircraft Cleaning Kit have been developed and tested by industry professionals specifically to protect and safely care for your aircrafts exterior and interior. Cessna remains committed to its legendary customer service by authorizing and approving this safe, reliable, and high quality cleaning kit that is among the best in the industry. Cessna has built a reputation for rising above the competition and their approval of this Aircraft Cleaning Kit is another example of their continuous attention to customer care. Your Cessna Aircraft Cleaning Kit contains the following detailing products: Flyers Speed Wax (16 oz) Quick Turn ( 16 oz) Ultra Magnum (16 oz) Plexiclear (16 oz) Leather Cleaner (8 oz) Stain Remover (8 oz) Terry Cloth Applicators (2) Microfiber Cloths (2) Care Guide Carry Bag P/N 09-02661 ......... $119.95
410
POLISHES CLEANERS
AEROLIFE POLYSHINE AIRCRAFT POLISH
Aircraft Polish with Tef Easy to use liquid Polymer formula polishes and protects, acts like a glaze to eliminate microscopic imperfections in the aircraft finish, helps reduce drag, adds to increased speed and keeps the bugs off leading edge components. Contains UV inhibitors for protection from the UV rays, is PH compatible for the new LSA market place. Contains No Silicone. For optimum performance application aircraft must be clean, AeroLIFE PolyShine with Tef is a Premium Aircraft Polish and Sealer, contains no cleaning agents. May be applied by hand or machine by the professional AeroLIFE complete line of cleaning products can be found at www. aerolifeindustries.com all products Made In the USA. 8 oz. P/N 09-02536 ............. $6.50 Specially formulated to address polishing of clear coat paints, enamels, lacquers, acrylics, powder-coated surfaces, polycarbonates, ABS plastics, glass, fiberglass, Corian, and cultured marble. Can also be used as a second step on all metal surfaces. Creates an unmatched finish and treats the surface with a protective barrier when applied as directed. 8oz bottle. P/N 09-02570 ........... $18.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Ideal for all rotorcraft and fixed wing. 16 oz. P/N 09-02534 ............. $9.25
Emulsifies oil and scum, the non-foaming biodegradable formula cleans without Phosphates. The water-based degreaser also cleans aircraft carpets, upholstery, fabrics and leaves a pleasant fragrance. Economical concentrate 50/50 ratio saves money; one gallon makes two gallons of cleaner and can be applied with a power washer or by hand. Can also be used in the engine compartment and is safe on rubber products and hoses. The ladies love this product for washing machines, as it does a great job removing oil from work clothes. Can also be used to clean up oil spills. 1 oz. ............................. P/N 09-02539 ............. $2.95 Gallon .......................... P/N 09-02533 ........... $28.75
Cutting edge technology lead to the creation of this next level formula. We recommend this product for all surfaces as a Final Step. It is a PDF (Petroleum Distillate Free) blend that offers the highest degree of reflective qualities while adding a barrier that protects against oxidation, UV rays and acid rain. The product can be applied by hand or by buffer. Leaves crystal clear results and No Swirls when applied as directed. A must on reds and blacks. 8oz bottle. P/N 09-02571 ........... $18.95
Optical quality (short weave) used in the camera, optical & telescope industris. Very high quality does not collect debris and lasts forever. They have washed these 100s of times and they still work perfectly. P/N 09-02572 ............. $4.75
AeroWax Aircraft Wax is made from Poly-Carnauba. Easy Application and Aerospace Developed. 16 oz. P/N 09-02535 $14.95
Adhesive & Sealant Remover (#AL13045) For fast clean-up and removal of sealants, and is ideal on residue from decals, labels and adhesives. Release will remove Loctite 5910 in a matter of seconds (Loctite #5910 is used to reseal the gearbox to the engine Rotax 912 series) 1 oz. ............................. P/N 09-02538 ............. $6.25 16 oz. ........................... P/N 09-02537 ........... $26.95
AEROLIFE RELEASE
This kit is specially designed to be used as an application and removal system of our products when using by hand. The materials have been developed using specially developed foams and optical quality micro-fiber cloths. The foams do not create static and produce an absolute scratch free result. Can be washed and resused many times. P/N 09-02575 ........... $14.95
Formulated to give incredible results on the following metals: Aluminum, brass, bronze, chrome, copper, gold, magnesium, nickel, pewter, platinum, silver, stainless steel, and sterling silver. Not recommended for use on plated surfaces with the exception of chrome. Can be safely and effectively used on paint, clear coat and power-coated surfaces. Can be applied by hand or by buffer. 8oz bottle. P/N 09-02569 ........... $16.95
This Pad is made from material that is compatible with Metal Armor Products. It is designed as a by hand applicator for their products. It produces no static and produces scratch free results. Can be washed and re-used many times. Can also be used as applicator for other products. P/N 09-02573 ............. $3.49
Clean Your Oil Stains with No Water, No Pressure Washer, In Less Time and For Less Cost with ReKRETE Waterless Concrete Cleaner! Power washing sends detergents and oils directly into the storm water systems. ReKRETE s bio-enzymes consume stains reducing contaminated water run off. ReKRETE works with its own specific gravity by penetrating deep into the pores of the concrete where petroleum-based stains are trapped. ReKRETE then breaks down the hydrocarbon chain of the petroleumbased stains. Once the chain is broken ReKRETE decomposes and dissolves the hydrocarbons with bio-organic compounds that actually consume the stains. 10-lb ............ P/N 09-03498 ........$30.00 20 lb ............ P/N 09-03499 ........$58.00 30 lb ............ P/N 09-03501 ........$86.00
This pad was designed to act as a removal device of (spent) material after it has been used. The pad is very absorbent and collects the residue before using the polishing cloth. The pad can be washed and re-used many times. It is static free and produces no scratches. P/N 09-02574 ............. $3.49
411
POLYGONE 310-AG
POLYWIPES
DIGESIL NC GEL
DIGESIL NCX
Red Canvas Pouch with black trim. Kit contains 10 Polyscrapers, each having its own pocket. Pouch can be rolled and secured with black tie. ............................................................................................................................ P/N 09-02458 ................................... $48.50
POLYSCRAPER KIT
412
CM WP ME HA
Cleans Disinfects Degreases Deodorizes Removes Stains Tough Task Cleaner - Spray Nines no-nonsense power tackles your worst cleaning jobs, even when others fail. And it does it FAST! Money Saver - The only product necessary to clean up facilities & maintenance costs. One does it all formula reduces chemical use and gets the job done with less labor in less time than the competitors. Broad Spectrum Disinfectant - EPA-registered disinfectant kills harmful germs like HIV1, Staphylococcus aureus, Salmonella choleraesuis & E. coli in just 45 seconds. Also helps prevent cross contamination. Authorized by USDA for use in federally inspected meat & poultry plants with an C-1 rating. 24 oz. Multi-Purpose.............................. P/N 09-01974..................$5.50 25 oz. Multi-Purpose.............................. P/N 09-01975..................$4.95 32 oz. Multi-Purpose.............................. P/N 09-01976..................$6.95 1 Gallon Multi-Purpose ........................... P/N 09-01977................$17.85 5 Gallon Multi-Purpose ........................... P/N 09-01978................$69.95 55 Gallon Multi-Purpose ......................... P/N 09-01979..............$657.50
AP LG EP CS IN EL AV TO PS BV
The BOSS Aircraft Cleaning Pad is the most advanced aircraft cleaning pad available. The BOSS Aircraft Cleaning Pad will safely clean bugs, carbon, fuel residues, dirt, grime, etc., from all your aircraft surfaces, leaving your plane the cleanest its ever been or your money back. Safe for all paints, clear coat, plastics, graphics, Boss Pad metals, etc. & Holder Works extremely well with soap & water, waterless cleaners or just a small amount of chemicals! Reusable Eco-friendly Requires no harmful chemicals Best product to use to clean leather or vinyl interiors The pads chosen to clean the Blue Angels Cleans your car just as well as your aircraft Aircraft Cleaning Pad ............................. P/N 09-03474..................$3.95 Aircraft Pad Holder (flat) ......................... P/N 09-03475................$15.95 Aircraft Pad Holder (curved) ................... P/N 09-03476................$17.95
413
COMPOSICLEAN BUCKET-WASH
Super Spray-Wax is neutral pH and SAFE on all aircraft. Will not attack composite components or assist corrosions. With real Carnauba wax and other cleaning and conditioning additives, this product is sure to satisfy. Provides a great shine and superior protection. Try it with one of our MicroFiber cloths. 1 Quart with commercial quality trigger sprayer. P/N 13-05255 .................. $19.65
This multi-purpose ALKALINE cleaner is very effective at breaking down grease, oils, carbon & other stains. Use with brush or rag to agitate for tougher Stains & soils. 1 quart with commercial quality trigger sprayer. This is not a neutral pH product. P/N 13-05256 ................ $10.95
MicroFiber is a man-made product that consists of two fibers, Polyester and Polymide. The Polyester is the scrubbing and cleaning fiber, while the Polymide is the absorbing and quick drying fiber. Each square inch in a MicroFiber towel contains approximately 90,000 MicroFibers. MicroFiber is a lint free, non-abrasive, and hypoallergenic products. Unlike ordinary cotton towels that move, or push, the dirt and dust from one point to another, MicroFiber actually gets underneath the dirt and lifts it from the surface. It then stores the dirt particles in the towel until it is washed. MicroFiber is very absorbent and can hold up to seven times its weight in moisture providing streak-free cleaning. MicroFiber cloths are safe on all surfaces. Keep MicroFiber cloths clean and separate from cotton towels. To ensure the effectiveness of your MicroFiber Towels only wash with other MicroFiber Towels. If MicroFiber is washed with cotton is will grab onto the cotton fibers and hold on to them. Washing by hand with mild hand soap is the best way to maintain this high quality cloth. MicroFiber cloths along with Composiclean Super Spray-Wax will provide a great streak free deep shine even in direct sun. When buffing off Super SprayWax, it is best to NOT let cloth get to saturated, dryer is better. Try a MicroFiber cloth with Composiclean View Polish for streak-free window cleaning. P/N 13-05259 ................ $16.85
surfaces of an airplane.
Super Squeegee is perhaps the most versatile squeegee youll ever own. It works great and is extendable from 12 to 22. It is designed to be used in a back n forth motion saving time and effort. Its perfect for use on the irregular and curved P/N 13-06323 ................ $12.95
Composiclean View Polish will probably be the best glass cleaner you will ever use, try it around the house too. Use View-Polish on windscreens, side windows, plastics, Lexan, acrylic and glass. You will see No streaking! ViewPolish is guaranteed to leave no film. Non-caustic-nonflammable, Non-ammonia formula dries fast and contain no CFCs that deplete the ozone layer. View-Polish is also a great bug remover for the leaning edges, wheel pants, car grills etc. Spray product onto area to be cleaned (the thick foam helps it hang there), wait 2 to 3 minutes then wipe clean. Give View-Polish a try with our MicroFiber cloths, youll love it! Offered in big 19oz aerosol can. P/N 13-05257 .................. $8.95
Soft chenille mop has 180 Swivel Head, handle extends up to 45. Includes 1 replacement head cover. P/N 13-05261 ................ $19.95
This is a Composiclean Solar-Screen statically attached to the inside of a window looking right into the sun. Comes in 6 x 9 and 9 x 12. Great for airplanes, cars, boats, RVs and can be cut to fit inside motorcycle & ski helmets too. 6X9 ..... P/N 13-05263 .................. $5.75 9X12 ..................... P/N 13-05262 .................. $8.95
1 - 64oz Composiclean Bucket-Wash with pump top 1 - 32oz Composiclean Super Spray-Wax with trigger sprayer 3 - Plush 14 x 14 Micro-Fiber cloths 1 - Super-Soft Chenille wash mitt 1 - 11 Composiclean Super Squeegee P/N 13-05264 ................ $79.95
414
These high quality 16x16 Microfiber Cloths are machine washable and wont scratch, mar or streak surfaces. Features; lint-free non-abrasive machine washable eco-friendly Green inexpensive and long-lasting P/N 09-02043 ...............................$3.20
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
TIRE CLEANER
SUPER TRIM ADHESIVE #1081 - A high temp high strength contact type adhesive. Bonds metal, foam, decorative laminates, fabrics, headliners. Variable width spray pattern. Meets Fed. Spec. MMM-A-130B. P/N 09-42652 ................... $7.60 V & S DRY SILICONE SPRAY- Exceptionally high quality dry silicone lubricant that stops adhesion of urethane foam backings, foam rubber and other non-sliding materials to metal, wood or rubber. Non-staining, will not harm painted surfaces. P/N 09-42654 .............................. $5.95 CITRUS CLEANER #609 - Can be used safely on many surfaces to remove adhesives, grease, inks, and residue from various tapes. Environmentally safe, biodegradable and pleasantly scented. P/N 09-42656 ............. $12.95
After washing your aircraft leave it wet, then spray WaxAs-U-DRY on the surface. After the water sheets away, you dry the surface with a chamois towel. The result is high gloss shine without spending the afternoon buffing. A one step spray wax is a blend of water reactive polymers and waxes that are safe for all painted surfaces, windows, trim & wheels. P/N 09-00370 .........$11.75
WAX AS-U-DRY
One of the most significant long term enemies to aviation is corrosion. Strike Hold is a potent anti-corrosive and has a dielectric strength of 38,000+ volts so it can also be used on electrical contacts and connections. It finds the small spaces which allow filiform corrosion to form. Its capillary action will quickly encapsulate metals by flowing against gravity and under overlapping sheets of metal. It is a highly penetrating and mobile liquid with CFCs and is non-flammable by flame projection test as opposed to other liuids containing butane or propane propellants. The lubricant in Strike Hold doesnt harden or become brittle. It completely seals out water with a shield film. The carrier agent evaporates (unlike ACF 50) and does not leave a dust collecting film to recontaminate a surface. The flash point is in excess of 450F and the freezing point is -85F. This product is heavier than water and does not damage polymers, rubber or plastics. Strike Hold can be used on virtually any surface that is susceptible to corrosion and that needs lubrication. 2 oz. Squirt Bottle ..................... P/N 09-02412 ...............................$3.50 8 oz. Squirt Bottle ..................... P/N 09-02593 .............................$10.85 13 oz. Spray Can ...................... P/N 09-00890 .............................$20.75 32 oz. Spray Bottle ................... P/N 09-02594 .............................$45.80 1 gallon bottle ........................... P/N 09-02595 .............................$18.85
The secret formula used in the film and photography industry, is now available for the aviation community! Eliminate fingerprints, streaks, dust, dirt, oils, from your avionics, glass cockpit screens, electronic flight bags, GPS screens, Laptop, and plasma screens. Aero 600 tested for well over three years by professionals in the aviation industry with outstanding results. Its designed to have industrial strength; be powerful, yet mild and gentle to your screens. We keep a bottle in the side pocket of our corporate aircraft and have been using it exclusively to clean our instruments, laptop screens and even our eyeglasses. It never streaks and helps keep the dust at a minimum.Nina Anderson, Hawker pilot. Aero 600 is also safe for use on Laptop & TFT LCD screens, LCD, Plasma & Projection TVs (LCD and Projection screens have a soft membrane in place of glass which can easily be degraded by harsh chemicals. Plasma screens have a thin delicate protective coating which also can be damaged. P/N 09-02040 .............................$14.85 The Worlds most effective UV-screening product. AAP leaves a like-new, non-oily, anti-static finish that does not attract dust. Protected surfaces not only last much, much longer, but are easier to maintain. AAP treated surfaces repel soiling and stains, clean up easier and stay clean longer. 100% prevention of UV caused slow-fade - Plastics, Plexiglass, Lexan, Door Seals, Wing and Prop De-icing Boots, Tires, Vinyl & Leather Interiors. 32 oz. ........................ P/N 09-02413 .......................$26.95 2 oz. .......................... P/N 09-02414 .........................$3.95 Stewart Systems ProPolish is the perfect metal polish to use in conjunction with Stewart Systems EverShield. ProPolish holds its shine longer than most other polishes and is very easy to use. Wipe on, wipe gently until polish is black, and wipe off. Repeat until you achieve the desired shine. Use SS ProPolish on bare metal or chromed surfaces, and then apply EverShield to make the shine permanent. SS ProPolish is available in green for cleaning and white for finishing. Green 8 oz. ......................P/N 09-02054 ................$13.85 White 8 oz. .......................P/N 09-02055 ................$13.85 Green 16 oz.. ...................P/N 09-02056 ................$18.70 White 16 oz. .....................P/N 09-02057 ................$18.70
THERMAPLEX BIO GREEN BEARING GREASE - Environmentally responsible, biodegradable grease. Qualified to the USDA Biopreferred program. NLGI 2 grease that prolongs bearing life. Provides outstanding extreme pressure performance. Offers superior rust and corrosion protectionDelivers exceptional water resistance P/N 09-02367...........................$10.95
415
CLEANERS WIPES
X-IT CARBON REMOVER & CLEANER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
X-IT Carbon Remover & Cleaner from Pantheon Chemical is a revolutionary aerospace chemistry powerful enough for difcult cleaning applications, but safe enough for daily routine aircraft cleaning & maintenance. X-IT Carbon Remover & Cleaner is safe on all surfaces (rubber, plastic, metal, painted or unpainted) & quickly removes heavy carbon, dirt, grease, grime and oil. X-IT Carbon Remover & Cleaner is non-toxic, non-corrosive, nonhazardous, odorless, and aqueous-based. 32oz. spray bottle ......................... P/N 09-00768 ....... $7.85 Carb Cleaner &Remover Gal........ P/N 09-00769 ..... $24.65 Carb Cleaner &Remover 5 Gal .... P/N 09-00770 ..... $68.75 Carb Cleaner &Remover 55 Gal .. P/N 09-00771 ... $574.00
Hydrasolve is a thickened, heavy duty, water soluble gel degreaser formulated for efficiency an dperformance in a broad range of cleaning and degreasing applications. It will easily and safely remove carbon exhaust, exhaust tracks, hydraulic fluid, thrust reversers, soot areas, oil & bugs. Hydrasolve is a gel product that clings to the surface being cleaned and has the ability to rinse spot free. it will not smear, but lift and suspend soils, making rinsing easy & complete. Meets Boeing & McDonnell Douglas approvals. 1 gal. ............ P/N 09-00528 ...... $25.75 5 gal. pail ..... P/N 09-00529 .... $118.95
HYDRASOLVE
Uniformly premoistened towel Superior terpene blend Deep cleaning, non-scratching abrasives quickly remove embedded dirt and grime Fast acting Disposable Eliminates the need for soap, water and a sink Improves workplace productivity by reducing costly clean-up time Does not require water Easy to carry and store Convenient Bucket of 72 Towels P/N 09-02546 ....................... $18.75
Purple Metal Polish is in a class of its own. This is truly a no-rub metal polish. When you see just how easy it actually is to polish aluminum, chrome, brass and even plastic, you will be totally amazed. Specially formulated for easability, durability and a super high quality shine. It is a super quick and easy maintenance product. Purple Metal Polish contains a superior abrasive along with Hi-tech cleaners and sealers to safely clean, shine and protect all metal surfaces without scratching! Also removes scratches from acrylic windshields. P/N 09-02860 ........................... $13.85
This 6 by 6 wipe is an excellent choice for cleaning chrome piston cylinders and struts. The wipe is presaturated with top of the line hydraulic fluid: Royco 756. It is lint and static free, made of 100% cotton cloth woven and finished without starch, binders, or any foreign substances. The cloth finish gives this wipe a softer and better dirt-trapping capacity and has incredible retention to minimize fluid drip. P/N 09-02668 ................$2.45
T-500 Paint Sealant with PTFE-M is more than a wax or polish. T-500 provides a tough, long-lasting, mirror-like finish that protects paint longer. Works great on aircraft, cars and boats. Fast Wing will increase performance by reducing parasitic drag. The performance of the aircraft actually increased due to the slick surface the Teflon Sealant left on the paint. 100% Satisfaction Guaranteed. 16 oz. (1 pint) ...........P/N 09-00186 ..........$17.95
This 6 by 6 wipe is an excellent choice for cleaning chrome piston cylinders and struts. The wipe is presaturated with top of the line hydraulic fluid: Royco 782. It is lint and static free, made of 100% cotton cloth woven and finished without starch, binders, or any foreign substances. The cloth finish gives this wipe a softer and better dirt-trapping capacity and has incredible retention to minimize fluid drip. P/N 09-02669 ................$2.45
Fast Wing T-600 vinyl & Leather Protector wipes dry leaving that lustrous new look finish. It creates a anti-static surface that helps repel dust and dirt, without leaving an oily residue. Fast Wing T-600 leaves a non-glare finish that is especially important to pilots and race car drivers. 16 oz. (pint)............................. P/N 09-00188 .................. $6.95
Originally designed to remove over spray, Fast Wing T-11 cleans and restores the paint to the original luster without the use of harsh abrasives found in most rubbing compounds. Rubbing compounds almost always use some sort of abrasive material, such as volcanic ash, which can leave microscopic scratches. Abrasives may actually accelerate the oxidation process. 16 oz. (pint) ...............P/N 09-00187 ............$8.95
Want a product that really takes the elbow grease out of polishing? This is a very Hi-Tech chemical designed to clean and deoxidize all metal surfaces without streaking, hazing, burning or damaging the surfaces. Removes scale, road film, most acid stains and even rust on Chrome! It is the easiest and safest way to prep the metal before polishing. It really works great! Can be used with most cream type polishes. If your aluminum has a milky look to it even after being polished, try this Aluminum Deoxidizer before polishing, you will achieve a Crystal Clear Shine. P/N 09-02859 ..............$13.85
ALUMINUM DEOXIDIZER
Safety Wash is a mild neutral PH water based exterior wash & wax concentrate designed to be gentle on your aircraft. It provides detergency and built-in easy rinse characteristics that will enhance gloss and eliminate the risk of streaking. Formulated for general routing washing of aircraft. Meets Boeing & McDonnell Douglas approvals. Safety Wash is NOT designed to clean heavily soiled areas. 1 gal. ................... P/N 09-00526 ........$23.50 5 gal. pail ............ P/N 09-00527 ......$106.95
SAFETY WASH
Water Sprite is an exclusive PVA material that gently cleans and dries fine finished surfaces. It actually lifts off residual dirt and grime away from the surface, leaving it clean and dry. It is not affected by mildew, bacteria or common household chemicals. It is used in place of a sponge or towel and when wet, can be used immediately upon removal from its package. It is individually packaged in a reusable plastic tube for convenient storage, moist or dry, in glove compartment or trunk. Size 3.0 square feet. P/N 09-03062 ..............$12.95
416
CLEANERS DEGREASERS
AVL LUBRICANTS & RUST INHIBITORS
AVL LIGHT - The premium light lubricant and rust inhibitor that penetrates and displaces moisture fast, leaving a delicate coating for excellent lubrication and rust protection. A fine, light film that resists the accumulation of dust and dirt. Ideal for drying and protecting electrical connectors and delicate machinery. Can sprays upright or inverted. P/N 09-02106 ............ $4.75 AVL MEDIUM - The premium medium lubricant and corrosion preventor is specifically designed to penetrate and displace moisture fast. It leaves a medium weight oily coating for long term lubrication and rust prevention. Can sprays upright or inverted. P/N 13-02963 ............ $4.85 AVL THICK - The premium thick lubricant and corrosion preventor penetrates and displaces moisture. It stops corrosion on contact leaving a thick coating for long term lubrication and corrosion prevention. Can sprays upright or inverted. P/N 13-02964 ............ $4.45 Unique cleaning & anti-corrosion chemistry delivers superior performance and materials-safety all in one. Cuts through tough, built up grease, oil, dirt, pollution, insect residue & impact soils. Gets its superior cleaning from a unique triple play cleaning formula. 2 high performance surfactants and new generation grease lifter/cutter combine to get the soil away from the aircraft surface quickly and keep it away so it can be cleanly rinsed away. Also able to go into oil/water separators and have oil break from solution. Extreme Simple Greens safety upon aircraft materials and precision cleaning surfaces comes from a combination of proven anti-corrosion agents. Time tested coupling agent allows these to work together to battle corrosion & hydrogen embrittlement. This makes it safe to put through pressure washing equipment, rack wash systems, dip tanks & parts washers, without any equipment damage. 32 oz......P/N 09-00809 .......$10.95 Gallon......P/N 09-00810 ... $18.85 5Gal. ......P/N 09-01236 .......$82.50 Spray.......P/N 09-01241 ... $49.75 55 Gallon Drum .........................P/N 09-01606 .......................... $587.00 Simple Green Pro HD is a non-toxic, non-corrosive, professional grade product developed for multi-purpose contractor applications including use on floors, walls, industrial equipment, appliances; automotive or recreational vehicle cleaning and degreasing; commercial kitchens and baths; and for pressure washing, parts washing, ultrasonic cleaning, and more. It quickly eliminates tough grease and grime, removes stains, and is safe on metal surfaces. Simple Green Pro HD is your one-stop cleaner and degreaser! P/N 09-02399 ............................$14.85 Non-toxic and Biodegradeable. Pre-moistened, quick and versatile with no color and no added scent. Non-abrasive and abrasive sides. .........................................09-01297 ... $13.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The powerful flushing action and a high solvency formulation makes cleaning metal parts faster and easier. Penetrates quickly into hard to reach areas, cleaning thoroughly. AVL NO CHLOR Cleaner/Degreaser does not contain any 1,1,1 Trichloroethane or any solvents or CFCs known to deplete the stratospheric ozone layer. Evaporates quickly leaving no residue. Removes oil and grease on contact. This is the best non-chlorinated degreaser we have ever produced. 14 oz. P/N 13-02961 ................. $5.80
The premium aviation cleaner that penetrates fast, cleans and degreases, removes dust and dust buildup without leaving a noticeable film or oil residue. Both penetrate and dry quickly. Ideal for air and ground, electrical and avionics, and sensitive mechanisms. Non-flammable. P/N 13-02958 ..........................$12.65
Use for equipment and machinery degreasing, parts washers and dip tanks, mechanized applicators. Non-toxic & biodegradeable, non-abrasive & non-flammable. 24 oz. (Trigger Spray) .......P/N 09-01298 ....... $7.95 1 Gallon .............................P/N 09-01299 .....$17.85 Simple Green Hand Gel is the safer solution for heavy-duty hand cleaning. With over 25 years of environmental leadership, Simple Green has customized a hand cleaner that has the powerful cleaning ability of Simple Green All-Purpose Cleaner/Degreaser, while being easy on the hands. It contains natural pumice to enhance the cleaning of stubborn dirt and grease; and lanolin for moisturizing and protecting skin. 5 oz. ..............................P/N 09-01301 ............... $1.78 1 Gallon (pump) ............P/N 09-01302 ............. $16.95
AVL Fast Acting Cleaner/Degreaser II is a highly concentrated solvent designed to remove dirt, grease, oil and grime from metallic and non-metallic surfaces. Cleaning is quick and simple without the danger of injury to working parts. Ideally suited for use on electronic motors even while running, electronic equipment, ignition systems, geneerators, power tools, etc. It is non-flammable and non-conductive so it can be used while motors and equipment are operating. Cleans & degreases very fast and dries quickly leaving little residue. P/N 13-02960 ........ $7.50
A citrus scented degreaser and cleaner designed for the aircraft industry. This surface degreaser is non-irritating but will remove heavy encrustations. Mach #1 (formally known as Big Orange Plus)combines solvent power with an emulsifier system that removes hydraulic fluids, fuel stains, and exhaust soot. P/N 13-00031 ..............$19.85
MACH #1 DEGREASER/CLEANER
15 depth soak basin at deepest point). Stainless steel workshelf, flex spigot & nylon flow-thru brushClean out plug for easy draining, includes filter kit and circulating pump. Overall dims: 36L x 24W x 39H. ................................P/N 09-01303 ........... $998.00
AVL glass cleaner is safe on all plastics and glass. It contains no ammonia. This foaming glass cleaner cleans and leaves a shiny finish with no residue. It easily removes bugs and grime from windshields and all surfaces. 15 oz. P/N 13-02959 ............$4.90
Crazy Clean is an all purpose cleaner which is excellent for removing fuel stains, exhaust stains, an dgrease and grime from your aircraft. Ideal fro removing bugs from leading edges. Crazy Clean produces a cinging foam which cleans and deodorizes and leaves a clean, not waxy surface. Keep a can in the airplane to use when travelling. Recommended by Aviation Consumer. 15 oz. aerosol can. P/N 09-00563 .............................$6.95
Clean & deodorize grease filters/traps. 24 oz. (Trigger Spray) ....... P/N 09-01306............ $6.50 1 Gallon ............................. P/N 09-01307.......... $15.75
Dissolves soap scum & mineral deposits. Deodorizes-contains no bleach, ammonia or phosphorus. Non-abrasive & non-flammable. Spray....... P/N 09-01308 .....$5.95 Bottle ....... P/N 09-01309 ...$12.90
417
TOWELS CLEANERS
MICROFIBER CLEANING TOWELS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These non-abrasive, super absorbent cleaning towels are excellent for cleaning plexiglass, rotors, props, and fronts of aircraft to remove bugs and dirt without fear of scratching. Microfiber needs only water to work due to its unique construction. Used extensively on aircraft, boats, RVs, and motorcycles. Available in Terry style (16X16, blue) and in Chamois style (16X 24, gold). Terry style .................P/N 09-00272 ....... $2.75 ea Chamois style ...........P/N 09-00273 ........$6.65 ea
The heavy-duty oil and solvent disposable wiper to replace cloth. Excellent for machine shop use. Each .................. P/N 09-03473 ...................$0.35 Pkg of 10........... P/N 09-02996 ...................$3.95 Pkg of 50........... P/N 09-02997 .................$14.95
Nevr-Dull Stain Remover is a proprietary blend of natural cleaning agents, plant-based surfactants, biocatalysts and enzymes. This specially blended enzyme-based stain remover is strong enough to remove all protein matter from hard surfaces, as well as carpeting and fabrics. Safe to use around people and animals. Ideal for use in hospitals, bathrooms, offices, automobile interiors and boats. Strong enough to use in commercial and industrial settings, but safe enough to use in the home. Features: Works on hard surfaces, carpet and any fabric Enzyme-based formulation Non-caustic and environmentally friendly No-caustic and environmentally friendly No harsh chemical fumes or vapor Removes food stains, mold, mildew, blood and much more Ideal for cleaning hard-to-reach spots like tile, grout and corners Safe to use around people and animal Renewableplant-derived formulation, phosphate free, no glycol ether, ozone safe, phthalate free P/N 09-02363 ................$7.50
The Mystic Maid Microfiber Cleaning Cloth will clean all hard surfaces to a streak-free brilliance without chemicals. No cleaning agents, soap, or detergent is needed; just the cloth and water. Simply wet the cloth, wipe the surface, and the cloth leaves a brilliant surface that air-dries in seconds. Machine washable and reusable for countless applications. Removes grease, dirt, and dust. Excellent for cleaning the aircraft windscreen and on leading edges for bug removal. 13x 20 cloth ............P/N 09-00191 ........$9.95 ea
Nevr-Dull Glass Cleaner is an environmentally friendly glass and surface cleaner that leaves a streak-free shine. Use on a variety of surfaces that include plastics, glass, mirrors, chrome, automobiles, boats and especially Strata, EZ2CY and Eisen glass. Ideal for use in hospitals, bathrooms and offices. Strong enough to use in commercial and industrial settings, but safe enough to use in the home. P/N 09-02364 ................$7.25
AERO WIPEASE
AERO WIPEASE CABIN & INTERIOR WIPES - A new convenient and easy
way to clean and shine your aircraft or boat cabin and interior. Anti-static and lint free with UV protection to use on Plastic, Glass, Vinyl, Trim, Dash, Laminated Wood and Leather. Keeping your aircraft or boat looking like new also works well on your automobile. Moisture Lock Lid. 35 Wipes. P/N 09-01238 ...................$6.95
Nevr-Dull Hand Sanitizer is a fast drying, non-sticky foam that contains unique conditioning and moisturizing ingredients. Skin is left feeling soft, silky and smooth, not dry or gooey. Proven to reduce S. Aureus by 99.99% in as little as 15 seconds. 1.7 oz pump bottle size. Fast acting effective in as little as 15 seconds. Will not stain clothing. Kills 99.99% of most common germs. Biodegradable . No alcohol non drying . Towel and rinse free use. No polymer thickeners or silicones. Nonflammable. Passes security check points including airports P/N 09-02369................$3.95
Tough Dupont Sontara AC aircraft wipes are the smart choice bor both aircraft manufacturing and maintenance. Their strength and durability make them ideal for a wide variety of general purpose & pre-paint applications. Sontara AC wipes leave surfaces clean because theyre exremely low-linting. Tackles tough cleaning agents without falling apart. every Sontara AC is clean right out of the box. No chemical residues or stains. Sontara is specially engineered to resist snagging on metal parts and corners. Superior to paper wipes which snag & tear. Outperforms cheesecloth which leaves strings behind when it snags on a rivet. Sontara AC is great for wiping surfaces dry because it contains no additives that hamper absorbency. 9 x 16 Wipes (Box of 100) ................P/N 09-00369 .......... $18.75 12 x 16 Wipes (Box of 125) ..............P/N 09-00368 .......... $49.75
Protect-All makes everything look better - cleans and polishes in one easy step. Works on vinyl, rubber, plastics, painted surfaces, fiberglass and chrome. Use Protect-All on the entire aircraft, inside and out, including windshields. 6oz. spray can..09-00556 ... $6.50 13.5oz. spray ...09-24900 ... $9.75 1/2 Gallon Jug ..09-00599 .. $33.85 1 Gallon. Jug ....09-00601 . $49.50
A non-abrasive, anti-static, water repellent wash that replaces soapy detergent products and eliminates rinsing when washing aircraft and other surfaces. No hose is needed. Quick & Easy Wash conserves water.Removes oxidation, stains and heavy grime with a strong cleaner or polishing compound before using Quick & Easy Wash for the first time. From then on use 1/2 oz. (1 capful) in a bucket with 2 qts of water for an average size plane. Use 1 oz per gal. for larger aircraft Wash a section at a time then just chamois, towel or squeegee dry! This is especially important where water use is restricted. Because you dont need to rinse, you can wash in your hangar and airplane tie-downs. Pint ....................P/N 09-24910 .............. $8.95 Quart .................P/N 09-24920 ............ $15.90
Cleans and polishes all metals including: Silver, gold, brass, copper, pewter, glass, steel, aluminum & chromium. NevrDull removes rust and tar from automobile and motorcycle chrome. Excellent for Mag & chrome wheels, boat fittings, workshop tools, fishing gear, sinks, showers & campers. 5 oz. .........P/N 1035605 ..............$6.95 Cleans and polishes all metal including: silver, gold, brass, copper, pewter, glass, steel, aluminum and chromium. Removes rust and corrosion instantly. NEVR-DULL removes rust and tar from automobile and motorcycle chrome. Leaves no deposits in the crevices of metal work. Excellent for: Mag and chrome wheels, boat fittings, workshop tools, fishing gear, sinks, showers and campers. P/N 09-24350....................... $36.50
1-Step Application: Cleans, Polishes, Seals Removes: Oxidation, Wax build-up, Stains, Surface scratches, Hard water spots For: Fiberglass, Gelcoat, Enamel, Polyurethane painted surfaces. 32oz. PN 09-01659 .................... $15.95
NEVR-DULL POLISH
Use on 100s of surfaces indoors and outdoors. Removes: Black streaks, grease and oil, stains, bugs, mildew, soap scum and more! Extra heavy-duty and super concentrated, it not only removes the heaviest black streaks quickly and easily, but may be diluted for 100s of uses indoors and outdoors. Use full strength for big jobs and dilute to make gallons of multi-purpose cleaner. Biodegradable PN 09-01660 .............................$12.25
418
CLEANERS POLISHES
PPC AIRCRAFT CLEANERS PERFECT DETAIL SURFACE ENHANCER
Perfect DetailTM is the nations leading choice for producing wet look shine! A light mist instantly produces maximum depth of gloss and flawless glassy brilliance on clear coat, black, and all other paint finishes. It works especially well on all other non-porous surfaces (such as chrome, glass, etc.) while lightly cleaning and accenting soft surfaces such as vinyl, rubber, and leather. For engine detailing Perfect DetailTM cant be beat! Perfect DetailTM is anti-static and slippery, enabling it to resist dust, dirt, and abrasion better than any product. 18 oz. ........................P/N 09-00165 ...........$10.75 1 Gallon ....................P/N 09-00166 ...........$46.50 Formula 2TM Cleaner/Protectant is a chemically unique multipurpose liquid which thoroughly cleans, beautifies, and protects all leather, rubber, vinyl, and finished wood products in one easy sstep with no greasy film! Due to its unique chemistry, Formula 2TM can also be used on painted and plastic surfaces. When applied sparingly to such surfaces it dries to a slick smooth, invisible coating resistant to mud, fingerprints, food splatters, soap scum, water spotting, etc. On leather, rubber, and vinyl Formula 2TM first dissolves away imbedded grime, then penetrates and softens the material to give it new life and flexibility, at the same time providing a lustrous, weather-resistant finish to prevent future deterioration. 20 oz. ....................P/N 09-00174 ..........$10.50
CM WP ME HA AP LG EP
Water-based BellyWashTM is highly concentrated for versatility and cost-effectiveness in any aircraft surface maintenance situation. It can be applied in any manner spray, brush, wipe, power washer, etc. and can be diluted with water by as much as 80:1 for routine cleaning in commercial application. Stubborn stains are dissolved almost on contact using full strength Belly WashTM, making it perfect for keeping troublesome aircraft bellies and wheel well areas in like-new condition. When used to remove concealing grime and petroleum-based residues form the aircraft engine area, Belly WashTM makes it possible to perform a more thorough inspection when checking for potential maintenance problems. 18 oz. ........................P/N 09-00168 ...........$12.95 1 Gallon ....................P/N 09-00169 ...........$48.75 One major performance factor the aircraft owner/operator can improve upon is complete removal of all parasitic drag resulting from impacted air debris on the leading edges. Wing CleanTM is specifically formulated to both safely and effectively dissolve the problem. Wing CleansTM water-based non-solvent spray-soak-rinse application dramatically improves an aircrafts flightready condition. Routine use of Wing CleanTM, in series with PPCs Perfect DetailTM and/or Prestige Protective Polish, produces a microcellular separation barrier on leading edge surfaces, making future bug removal a progressively easier task. 18 oz. ........................P/N 09-00170 .............$9.65 1 Gallon ....................P/N 09-00171 ...........$39.75 Crud Remover made with water is an environmentally safe replacement for heavy-duty petroleum cleaning solvents. Its extremely powerful degreasing and defatting abilities enable it to dissolve diesel fuel, soot, and oily deposits on contact, grease and heavy grime in seconds, and virtually any stain from any surface including cloth in a matter of seconds! It also loosens bolts. It can be applied in any manner spray, brush, wipe, or soak and simply rinses off with water. 18 oz. ........................P/N 09-00172 .............$9.85 1 Gallon ....................P/N 09-00173 ...........$43.75
EasyTM Aluminum Polish is a unique liquid formula that produces a mirror-like shine in seconds on smooth aluminum, magnesium, stainless, brass, nickel, etc. Its ability to melt oxidation and simultaneously bring up the metals true brilliance cant be matched by any other polish. The application of EasyTM allows its exclusive acrylic polymer barrier to lock onto the metals polished surface to resist staining, tarnish, and weathering effects indefinitely. The fine mirror finish can easily be maintained with a quick touch up application of product as desired. 8 oz. ............... P/N 09-00177 .................$10.75
CRUD REMOVER
RealTM Wheel cleaner is the first detergent-based single product able to clean brake dust and corrosion from any type wheel in seconds! It works on contact to remove corrosion from older unfinished or neglected metals (aluminum, copper, brass, bronze, zinc) and is great for antique restoration. RealTM Wheel Cleaners exclusive detergent action saves both time and money when detatiling any vehicle. 18 oz. ...................... P/N 09-00178 .......................$7.95
CS IN EL AV TO PS BV
Aero Glaze is a high-grade protector and restorer. Removes oxidation, fuel stains, soil, insects and exhaust deposits. Aero Glaze retards corrosion, resists stains and prevents paint deterioration. 1 Gallon ................P/N 13-00030 .......... $54.75 Kleen Jet is a biodegradable aircraft industry cleaner and degreaser. It is a water-soluble, non-flammable, non-toxic concentrate that leaves no oily film or residual gumminess. Removes carbon, oil, grease, insects and inhibits corrosion and rust. 1 Gallon ................P/N 13-00029 .......... $27.50 A citrus scented degreaser and cleaner designed for the aircraft industry. This surface degreaser is non-irritating but will remove heavy encrustations. Big Orange Plus combines solvent power with an emulsifier system that removes SKYDROL, hydraulic fluids, fuel stains. exhaust soot. 1 Gallon ............P/N 13-00031 ...........$19.85 Fleet Wash aircraft wash and wax is an effective cleaner that leaves a wax-like surface on the washed aircraft. Contains a high percentage of W-300. Fleet Wash leaves a high luster, waterrepellent surface which helps to repel dust. 1 Gallon ............P/N 13-00032 ...........$18.95
Naturally NewTM Tire Dressing utilizes PPCs advanced water-based polymer technology to produce an effective, cost-efficient dressing that actually protects rather than destroys the integrity of the sidewall. Naturally NewTM exactly describes the lustrous sheen imparted on contact with this instant action formula. The dry, semi-permanent barrier is both water repellent and resistant to dust, dirt etc. Naturally NewTM Tire Dressing adds maximum beauty while conditioning to keep that new tire look during the treadlife of the tires 18 oz. ........................P/N 09-00179 ............ $9.95
FLEET WASH
SunBlocks newest product features cleaning and protection for leather that prevents stains and cracking. The SunBlock Cleaning System for leather interiors keeps your leather soft and supple by maintaining the moisture in the leather and preventing the destructive effects of everyday use while preserving the leather topcoat. Regular use of SunBlock Leather Cleaner and SunBlock Protection Cream will maintain the original look and feel of the leather without affecting the leathers breath-ability. This kit is safe for all leather except Suede or Nubuck. Contains; 1- 5oz. Bottle of SunBlock Leather Soft Cleaner 1- 5oz Bottle of SunBlock Leather Protection Cream 1- Soft Cloth 1- Sponge P/N 06-01048............................$19.95
419
Supreme Glaze is a semi-flowing paste cleaner wax that cleans, shines, resurfaces, all aircraft painted surfaces while bringing out the brilliance of the original color. Supreme Glaze safely removes light to medium oxidation and scratches. Excellent for use on carbon exhaust stains associated with aircrafts such as King Airs. Supreme Glaze contains color brighteners and will protect against oxidation, salts, UV rays, hydraulic fluid, insect residue and acid rain. Can be used by hand or machine polisher. 16 oz. Bottle ..............P/N 09-37980 ...........$20.75
This wax is perfect for waxing between flights. This remarkable spray on/wipe off wax is water based. No streak. No Smear. No white residue. Gives a super gloss, super fast. 16oz. trigger spray. 09-01678 ............................ $13.75
SpeedWax is a specially formulated waterless aircraft polish and high gloss protectant Dry-Wash. This product is Carnauba Rich & is easy-on, easy-off. With Flyers there is no need to pre-clean any surfaces before using. Due to EPA regulations, cleaning aircraft with soap and water is becoming more and more regulated. Flyers SpeedWax is the answer to the ever increasing EPA regulations. This product will allow you to clean your aircraft in a reasonable amount of time, leaving the surface of your aircraft highly protected. 16 oz. bottle ..........P/N 09-42015 .......... $15.75 SKAI METAL POLISH - Skai Metal Polish is designed to polish and restore aluminum or stainless steel to a mirror image. Used for polishing aircraft leading edges, spinners, engine inlets, thrust reversers and bare aluminum skins. Also safe for use on aircraft paint for removing heavy oxidation and stains. Skai Metal Polish is also very economical. A one pound container will normally equal several pounds of our competitors products. Skai makes very little mess when you are polishing and will not sling over the aircraft if used properly. Skai is non-abrasive, fast cutting and quick to clear under a buffer. Surfaces treated with Skai are protected and resistant to oxidations MIRROR IMAGE - Mirror Image Brightwork Swirl Remover is designed to remove swirls in polished metal caused by machine buffing. Mirror Image can also be used as a light maintenance polish between machine polishing jobs. Contains corrosion inhibitors and anti-oxidation agents for long lasting protection on all polished metal. Mirror Image will produce 100% protection while sealing the polished metal. 1 Lb. can. Polish .......P/N 09-41713 .......... $44.95 Mirror Image 5 oz. roll Swirl Remover.........P/N 09-41715 .......... $29.95 Neoprene Aircraft Squeegee has been improved by adding locking threads for pole attachment and is now constructed from white plastic instead of metal. Will remove water from un-even aircraft surfaces safely and smoothly. You will save time and dozens of wet towels while completely drying any size aircraft in just minutes. P/N 09-42025 ...........$24.95 Buffing Pads are made from 100% wool with a 1-1/2 inch pile. These pads can be used for all of your brightwork and paint polishing needs and will cut through oxidation quickly and wear evenly for extremely smooth polishing. Our buffing pads can also be washed and re-used multiple times for long lasting life. They do not have velcro backing and are designed to be used with a threaded nut and backing plate. P/N 09-42035 ...........$13.65 Absolutely a must tool when buffing.The Buffing Pad Spur Cleaner is used to break down compound build- up without removing the pad from the machine polisher. When buffing, your pads fill up with polishing compounds not allowing to perform properly. The Buffing Pad Spur Cleaner will quickly and efficiently remove this build-up, restoring the pad to its full potential. P/N 09-42045 .......... $12.85
Flitz Waxx Protectant is a water-based super-premium white carnauba & beeswax product. Will not dull aluminum, billet aluminum and magnesium like other waxes can. Thats because Flitz waxx protectant contains no silicone. 100% compatible with Flitz Polish. Use on: All painted surfaces, clearcoat, gelcoat, ceramic coatings, lacquer, aluminum, stainless steel, Emron, powdercoat, polyurethane, fiberglass, acrylic sheet, eisenglass, acrylics and plastics. Features: Ultra-creamy texture. Pleasant smell. No white residue. Outstanding performer for airplane / auto / truck / boat. Environment friendly. The ultimate in UV and rain protection. Body Shop safe - Silicone Free. Protects up to 6 months in fresh water / 3 months in salt water. 16 oz. .....................................P/N 09-03482 ..............$25.25
multi-purpose polish.
Flitz is a non-abrasive metal polish which can be used on all metal surfaces including polished aluminum, painted surfaces, and fiberglass. It is easy to apply and remove, and leaves a protective film to protect shiny surfaces up to 4 months A very popular 1.76 oz. Tube .......P/N 09-42405 ............ $9.50 5.29 oz. Tube .......P/N 09-01676 .......... $18.36 2.2 Lb. Can ...........P/N 09-42415 .......... $47.50
The Flitz 8 Polishing & Buffing Ball is made of a viscos materialwhich is a cooling material vs. lambs wool or cotton which is a heating material. This way it doesnt burn the paint and can be used to buff leading edges without having to tape them. This ball works wonders with Flitz Products and makes polishing much easier, faster and more effective in less than half the time. It fits all drills and air tools and will buff out scuffs, oxidation tarnish, pitting, corrosion on all metals, paints, fiberglass, plastics, and wood. Re-usable & washable. P/N 09-00554 .......... $35.70
AIRCRAFT SQUEEGEE
The Flitz microfiber cloths are 30 times finer than cotton and are great for buffing out waxes and polishes by hand. They will wash windows without chemicals (just use water) and will not streak or leave lint. Size: 16x16. P/N 09-00556 ............ $6.50
Use on metal, painted, or buffed aircraft surfaces to clean and maintain a beautiful shine. Good on spinners and prop blades too! Made from specially woven cotton fibers with a unique cleaning formula that lifts loose dirt and dust up and away from the surface. Use every time you fly to maintain a shine all year round! Reusable more than 50 times. P/N 09-00345 ..........$12.85
Super Shine is a no-run, all purpose spray cleaner and protector. Just spray on Super Shine and let its foaming action lift off dirt and grease from all washable surfaces. Surfaces stay cleaner longer, while fogging and static build-up is eliminated. Ideal for use on plastic windows. Plexiglas, windshields, vinyl, leather, glass, tires and trim, chrome, fiberglass, acrylics, veneers, and painted surfaces. Non-toxic and meets California Clean Air Act. Widely used in aviation, racing/automotive, motorcycle, & marine industries. 15 oz. Spray Can ..........P/N 09-42580 ....... $5.40 ea
420
CTI Cleaner - Deoxidizer is great for removing hairline scratches and light to medium oxidation.Its mild abrasion creates a clean, smooth surface. Does not contain any shine components. Follow with polish or wax. ................... 1GAL P/N 09-00413 ..........$64.25 16OZ. ......................P/N 09-00414 ............ $9.90
CYCLO CLEANER-DEOXIDIZER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CTI 1 Pass Express removes light scratches and environmental contaminants in one operation. Restores showroom color and brilliance, and protects finishes with a brilliant weather resistant silicone film. Excellent on any paint surface, including clear coats. 1GAL .......................P/N 09-00416 .......... $53.25 16OZ. ......................P/N 09-00417 .......... $13.95
CTI Polish & Protective Sealant is a high poly sealant that will give your surface 12-18 months of durable protection and brilliant gloss. Restores your paint to its original new car shine. Great for use on all painted surfaces. Cannot be sold to residents in the following states: CA, CT, DE, DC, IL, IN, ME, MD, MA, MI, NH, NJ, NY, OH, PA, RI, VT, VA, WI 1GAL .......................P/N 09-00418 .......... $64.25 16OZ .......................P/N 09-00419 ............ $9.50
CTI Free Flite Protective Sealant is a mild deoxidizing agent specially formulated to bond to bare metal. It removes those fine polishing swirl marks seen only in direct sunlight and leaves a protective coating that prevents further oxidization. For use on metal only. Cannot be sold to residents in the following states: CA, CT, DE, DC, IL, IN, ME, MD, MA, MI, NH, NJ, NY, OH, PA, RI, VT, VA, WI 1GAL .......................P/N 09-00423 .......... $37.95 16 OZ ......................P/N 09-00422 .......... $14.50
Cleaner Paint Deox Paint Compound Paint Swirl Removal. With Velcro ...............P/N 09-35727 ........... $4.40 Without Velcro ..........P/N 09-35700 ........... $5.90 WHITE FINISHING PADS - Extreme Shine Final Wax Buff Wax Application Sealant Metal Sealant With Velcro ...............P/N 09-35735 ........... $4.60 Without Velcro ..........P/N 09-35736 ........... $5.50 GREEN POLISHING PADS - Sealant Paint Polish Paint Cleaner Metal Sealant With Velcro ...............P/N 09-35732 ........... $3.40 Without Velcro ..........P/N 09-35711 ........... $6.50 Note Polishing Pads with Velcro require the RUBBER PAD HOLDERS P/N 09-35730 listed with the Cyclo accessories COTTON TERRY PAD COVER - Final Wax Buff Upholstery A 100% cotton terry cover. Perfect for cleaning interior surfaces and for buffing, polishing, and drying exterior surfaces. P/N 09-35755 ........... $3.50 FASTCUT 600 GRIT DISC - Tile and Grout Ice Hockey Rink Walls Rust Removal - This coarse nylon pad is strong, durable, and specifically designed for rough surface areas. P/N 09-35737 ............ $1.21
CTI Free Flite Cleaner - Polish is an aggressive rubbing compound for badly oxidized aluminum. It removes corrosion, oxidation, and surface film, leaving a hard polished finish. Popular with airlines for decades. For use on metal only. 1QT .........................P/N 09-00424 .......... $18.75 5GAL .......................P/N 09-00425 ........ $212.85
GRAY ULTRA SOFT UPHOLSTERY BRUSH - Upholstery Fine Carpets Fine Interiors P/N 09-00689 .......... $21.85 AQUA SOFT CARPET BRUSH - Fine Carpets Durable Carpets Auto & RV Carpets & Upholstery P/N 09-00690 ......... $20.75 WHITE STANDARD CARPET BRUSH - Auto & RV Carpets & Interiors Tile & Grout Durable Carpets P/N 09-35742 ......... $20.75 BLACK STIFF SCRUB BRUSH - Tile & Grout Truck Bed Liners. P/N 09-35740 ......... $21.75 Rubber Pad Holders ....................................P/N 09-35730 ........... $9.95 Flat Wrench .................................................P/N 09-35745 ............ $5.25
CYCLO BRUSHES
The Cyclo Dual Head Orbital Polisher is the most effective means of polishing available today. Even in the hands of a novice, it is safe to operate and provides professional results every time. The difference lies in the tool's overall balance and its patented dual heads. The dual heads operate in a synchronized motion, providing the most effective results without fear of heat buildup; damage to trim pieces, moldings and gaskets; swirl marks, holograms and more. The low-vibration and balanced design allow for a more even application and better control when operating. Electric Polishers. The Cyclo Aviation Polishing Kit includes the Cyclo Polisher, two Cyclo wool polishing pads, two Cycloe green polishing pads, and one 1 lbs. can of MET-ALL aluminum polish. This kit will enable you to polish the painted and aluminum surfaces on your aircraft to a high shine quickly and easily. For complete line of Cyclo accessories see the Aircraft Spruce website or catalog. Specifications: Power Supply: 115 Volts, 60 Hertz, 220 Watts Motor: alternating current, semi-enclosed 24-bar commutator Speed: 3000 orbits/minute Output: 1/3 H.P. (.25 Kw) Weight: 6.5 lb (2.9 kg) Head Rotation/Diameter: clockwise 4" Electric Cord: 10 feet length, 16 ga/3SJTOW Housing: Heavy-duty cast aluminum - polisher only P/N 09-02553 .......................$364.95
421
DE-ICER PRODUCTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Age Master #1 rubber protectant helps extend the life of your deicers so you can cut maintenance costs, slow deterioration and aging, extend service life and save money. Age Master #1 protectant isnt just a surface coat. It penetrates neoprene rubber to help retard damage from ozone, weathering and pollutants to help your de-icers stay strong and flexible. And now its economical, long lasting and easy to apply. Just follow the simple BF Goodrich guidelines. Wipe or brush on Age Master #1 protectant every 150 flight hours or at least semi-annually, for continuing protection. Age Master #1, the only rubber protectant recommended by BF Goodrich. Meets military specification MIL-P-11520E. Age Master #1 protectant is a staining material. Avoid contact with painted surfaces. Apply sparingly and let dry thoroughly before flying in rain to prevent run-back. Quart .................... P/N 09-42545 ....$189.95 Icex coating boosts your de-icer performance so you fly with greater confidence by helping your de-icers shed ice at peak efficiency. Icex coating chemically bonds with rubber de-icer surfaces and forms a slick film that makes your de-icers slippery. It will lower the adhesive bond between ice and de-icer surfaces so your de-icers break the frigid grip of ice better and faster! Icex coating is easy to apply and economical, too. A single application provides 50 flight hours of added ice fighting protection on leading edge de-icers and 15 flight hours of protection on prop de-icers. Get Icex coating in quart cans for an attractive uniform satin finish on your de-icers. One is enough to treat a complete single or twin-engine aircraft. Quart .................... P/N 09-42530 ....$294.00 16 oz. Spray ......... P/N 09-42531 ....$174.50 BF GOODRICH DE-ICER CEMENT 8 oz. can . P/N 09-42535 ......$72.50
TKS 406B contains a mixture of glycol and alcohol and offers good ice protection capability (freezing point below -60C). Principally used for in-flight ice protection, TKS 406B can also be applied to remove frozen deposits of snow, ice and frost from stationery aircraft on the ground. TKS 406B is designed for use in cold concentrate form (as supplied) and is available in 2.5 gallon, 5 gallon, 30 gallon, and 55 gallon containers. Features: Ice Protection capability Fully biodegradable Simple to use Note: NO HAZ SHIPPING FEES (UP TO 250 GAL) Description TKS406B Ice Protection Fluid 2.5 gal. TKS406B Ice Protection Fluid 5 gal. TKS406B Ice Protection Fluid 55 gal. TKS406B Ice Protection Fluid 250 gal. Part No. 09-02401 09-02402 09-02404 09-02984 Price $59.95 $109.95 $968.00 $3,565.00
Measure then release desired amount On/off valve Extension tube P/N 12-02586 ..................$12.85
Shinemaster Prep is a surface coating that cleans de-icing boots & prepares the de-icer for Shinemaster. Shinemaster is a wax surface coating that enhances the appearance of pneumatic de-icing boots. Simply clean the boots with Shinemaster Prep per the instructions, then apply a couple of coats of Shinemaster treatment per the instructions. New boots look spectacular and old boots look like new. Compatible with Agemaster No. 1 and Icex products. Shinemaster Prep (qt) ....... P/N 09-42532 ...... $59.95 Shinemaster (pt)................ P/N 09-00325 ...... $87.50
Sooner or later, most pilots get into icing conditions and an icefree propeller may be the ticket to safety. Years of testing have shown Ice-Away to stay on for several hours in icing cconditions. Ice-Away facilitates propeller ice shedding and enhances safety. Simply spray Ice-Away on the propeller leading edges and reapply as necessary P/N 09-00264 ........................$19.85 Rain B Gon will dramatically improve your wet weather flying, riding or driving visibility. A hydrophobic coating technology that forms a chemical bond and causes the raindrops to bead up and blow away from the windshield. Rain B Gons innovative technology is designed especially for plastic Acrylic and Lexan windshields, and has no alcohol which can harm plastic. It is safe to use on glass windshields also. Can be applied on painted surfaces, and aids in easy removal of salt, ice, frost, insects and mud. 8 oz. spray bottle P/N 09-03487 ...........................$9.95 Aircraft with bleed air rain removal systems, such as Cessna Citation and Learjet, need to have their windshields treated to help disipate the rain. Repcom rain repellant was the recommended product, but it is no longer available. Rain-X is manufactured by the same company and it is the same formulation. While not FAA approved, it works well in dispersing water on the windshield. *Not Recomended for plexiglass or acrylic products, such as, windshields or windows on small general aviation aircraft. Benefits: Improves driving visibility Repels rain Helps reduce sleet and snow from sticking Rain-X transparent polymer coating causes rain to "bead up" and roll off glass surfaces P/N 09-42500 ...........................$4.95 A protective treatment which leaves a clear, smooth, non-stick surface. Visibility is improved by repelling rain, bugs, frost and road film. Raindrops bead up and are blown away while flying. P/N 09-01279 .................................. $5.95
RAIN B GON
Another quality product from Rapco, Bootsaver seals pin holes by bonding with the boot material. It is black in color and can be smoothed to blend with the boot surface. ................................ P/N 09-41705 ...... $67.50
PBS Prep is formulated for use before each PBS Boot Sealant application to avoid dulling and hard to remove build-up. PBS Prep will effectively clean pneumaticde-ice boots of all old treatments assuring the best results possible when applying PBS Boot Sealant. Failure to prepare de-ice boots with PBS Prep may result in dulling due to build-up. Qt. PBS Prep ...................P/N 09-41711 ........... $26.85 Qt. PBS Sealant ...............P/N 09-41712 ........... $53.75
RAIN AWAY
BOOTSEDGE WAX REMOVER / MULTIPURPOSE CLEANER - This is a non-corrosive, bio-degradable and non-hazardous. Great for cleaning: Pneumatic de-icers Exhaust stacks Exhaust soot Landing gears Aircraft underside Hard to clean areas P/N 09-02396 ............. $29.95
Easy to apply and long lasting, Raincoat has a special wax blend that is suspended in a mixture of alcohol and water which is safe for all plastics. These waxes are hydrophobic, that is, they hate water. They repel water by beading up the drops. Because those beads of water have less contact with your plastic optics, the larger ones run off with gravity or the wind. The remaining water will appear as smaller and more rounded droplets rather than a smear that distorts your vision. By repelling the water, the trapped dirt and salts stay off your lenses or shields. So you will not need to clean them as often. Aso, it has been reported that ice and snow find it difficult to stick to plastic surfaces coated with Raincoat Advanced Water Repellent Coating.. P/N 09-03427 ........................$14.85
422
CLEANERS AEROKROIL
ALL-SPRAY DETAILERS
The All-Spray Detailer packages All- Spray cleaner and a disposable Microfiber Towel into a portable Wet/ Dry combo pack. This on-thego Detailer is designed for a quick, single-time aircraft window cleaning application. Stow these window detailers in the back of the aircraft or in the glove box. The Detailer measure 3.25 x 4.5 when folded in half. A package of 10 makes a great gift. P/N 09-02375 ...............$3.95 This product meets Garmin G1000 Pilot Guide specs for cleaning and is safe to use on glass panels. EZCLEAR Instrument Cleaning provides a safe, effective way to remove fingerprints and dust from glass panels, instruments and more. The kit contains three EZCLEAR Cleaning Packs and one Polishing Cloth; these items have been specifically paired together to ensure safe and effective screen cleaning. Per the instructions, the user wipes the surface with the Cleaning Pack and then dries the area with the Polishing Cloth. The Cleaning Packs are ammonia free, aviation-grade and will not remove or damage any anti-reflective coating. The Polishing Cloth is washable. This kit will last between 3-4 months depending upon frequency of use. P/N 09-02394.............................$14.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Detailers All-Spray is an aviation grade, anti-static detailing spray that will quickly restore a brilliant luster to acrylic surfaces. All-spray is ideal for cleaning aircraft windows, instrument panels, landing light and navigational lenses. It is also great for cleaning clear plastic boat windows, convertible windows, helmet shields, motorcycle windscreens, CDs, aquariums, skylights, displays, and other Plexiglas, Lexan, Acrylite and Lucite plastic surfaces. 8 o.z. ........... P/N 09-02383.............................$8.75 32 o.z. ......... P/N 09-02379...........................$27.95
This kit packages All-Spray Window Cleaner, Disposable Microfiber Towels, on-the-go All-Spray Detailers and a small polishing cloth all in one. All-Spray is a premium, aviation grade, cleaning spray that will give windows a residue-free, smooth polished appearance. After using this anti-static product, there will be no micro particles of dirt and dust left on the window to reflect the light, thus making the window easier to see through; the window will feel smooth and waxed to the touch. All-Spray is ammonia-free. The small kit includes: 1 - All-Spray (Qty: 8 fl. oz.), 10 - Microfiber Towels (16 x 17), 3 - All-Spray Detailers, 1 - Small Polishing Cloth P/N 09-02378...........................$28.95 The large kit includes: 1 - All-Spray (Qty: 32 fl. oz. ), 50 - Microfiber Towels (16 x 17, 15 - All-Spray Detailers, 1 - Large Polishing Cloth P/N 09-02382.........................$123.95
These disposable Microfiber Towels are a generous 16 x 17 inch size and are made of the highest quality, aviation-grade Microfiber. Use these scratch-free/lint-free towels with AllSpray (PN: 09-02379) to leave your aircraft windows clean, smooth and brilliant. 10 Pack P/N 09-02384..............................$7.45 50 Pack P/N 09-02376............................$28.50
This Polishing Cloth is an aviation grade, re-usable microfiber cloth designed to remove any residue, dust or fingerprints from aircraft windows. Can also be used to go over painted surfaces and helps restore a brilliant shine. The smaller cloth can be used on avionics and helps remove dust and fingerprints. Large Cloth: 22 x 25 Small Cloth: 7.5 x 7.5
Large Polishing Colth (22 X 25 inches) ........ P/N 09-02380 ............$8.95 Small Polishing Cloth (7.5 X 7.5 inches) ...... P/N 09-02377 ............$6.75
Rid Odor Sport is a product that nearly every owner of a Single Engine/Multi Engine both pressurized and non-pressurized need! Why? Because there are two things that nearly ever aircraft owner fights, whether they hanger their aircraft or tied down. Moisture and Bacteria are the two major reasons why cabin spaces have terrific problems with "Odors". Rid Odor Sport is chemically engineered and designed to be attracted to ALL Malodor molecules and the reasons for them being there. Everything that is organic is surrounded by atoms. All atoms have one thing singularly in common and that is that they are oriented with a positive (+) charged molecules. Rid Odor Sport is designed so that the each molecule inside our formula is constructed with a negative (-) charged molecule. When Rid Odor Sport is pump sprayed into the vicinity of all of the Malodor Molecules (+) , the Rid Odor Sport Molecules (-) are attracted and drawn in by Malodor molecules. Once they collide, the Sports molecule bonds to the malodor and destroys the malodor molecule. Unlike other products that just mask over the odor, Rid Odor destroys the malodor and leaves the inside of the cabin smelling like new ! 2 oz. Pump Spray ......................P/N 09-02609 ............$7.95 8 oz. Trigger Spray ....................P/N 09-02610 ..........$12.75
Corrosion, compression, chemical reactions, thermal variations, and electrical interrelationships are the primary factors which contribute in varying degrees to frozen metal parts. For example, in some instances, loosening a frozen metal part requires that the molecular bond of oxidation be broken at the first molecular level. This requires that a chemical bond be broken in an often-inaccessible location that literally exists in infinitely small spaces. Based on a unique proprietary formula and manufacturing process, Kano created a molecule which had an inherent means of expedient self propulsion which would penetrate into spaces which are immeasurably small. In the lab, it was nicknamed Creeping Oil, Kreeping Oil, and finally Kroil. To these penetrating properties were added the ability to disrupt the existing corrosive bond while remaining chemically neutral to the base metal. Since not all frozen parts are caused by corrosion, additional research has provided for the inclusion of other molecular properties assuring that the final molecular architecture would also be capable of loosening frozen metal parts when other factors such as compression were more responsible for the problem. The result is Kroil, the worlds largest selling penetrating oil. Guaranteed to penetrate, lubricate, and loosen frozen metal parts or it costs you nothing! 13 oz Aersol ............ P/N 09-02665 ..........$16.95 16.5 oz Aersol ......... P/N 09-03022 ..........$19.65
423
LPS PRODUCTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A deep penetrating formulation attacks rust and corrosion to free frozen parts. LST has an extremely low surface tension that combines with a powerful foaming action to provide complete surface coverage, better penetration and improved moisture displacement. LST Penetrant lubricates and protects against rust and corrosion. 11 oz. aerosol can. ......... P/N 09-01916.............. $9.75
Provides a dry, thin lubricating film. Resists oil, dust and dirt build-up. Fast acting penetration. Displaces moisture Loosens rusted or frozen parts. Provides a short term, light corrosion resistant barrier. Nonconductive Ideal for delicate mechanisms. Used worldwide in aviation. Safe on paint and most plastics. Inverta Spray Valve allows user to spray in an upright or inverted position NSF H2 registered . 11oz. (312g) aerosol .............. P/N 09-25900......... $13.75 1 gal. (3.78 l) ............................. P/N 09-26000......... $49.00 Strong, multi-purpose lubricant and penetrant with added corrosionprotection. Provides a nondrying, light, oily film for use on indoor/outdoor equipment. Reduces wear caused by friction and corrosion. Displaces moisture Loosens rusted or frozen parts. Provides up to one year of protection. Nonconductive Safe on paint and most plastics. Inverta Spray Valve allows user to spray in an upright or inverted position. NSF H2 registered 11oz. (312g) aerosol .............. P/N 09-26100......... $11.95 1 gal. (3.78 l) ............................. P/N 09-26200......... $48.50 * Forms a transparent, soft, waxy film for protection & lubrication * Inhibits rust & corrosion, protects steel parts indoors for up to two years * Penetrates to displace moisture * Does not contain chlorinated solvents or silicone * Nonconductive * Safe on most surfaces * Stops rust and corrosion * Provides non-sling lubrication * Provides anti-seize coating * Safe to use on rubber, fabric, plastics and paints * Inverta Spray Valve allows user to spray in an upright or inverted position * NSF H2 registered #129027: (aerosol); #059849 (bulk) 11oz. (312g) aerosol ................................. P/N 09-26300......... $14.95 20fl. oz. (591ml) trigger ............................. P/N 09-01223......... $22.75 1 gal. (3.78 l) ................................................ P/N 09-26400......... $72.85 Patented formula Patented US #6,342,471. Electrical contact cleaner. Cleans electrical parts without harming plastics. * Non-flammable * Plastic safe * Non-conductive * No residue * Replaces HCFC 141b contact cleaners * Fast evaporating * Conforms to CARB VOC requirements. 10 oz. spray can. P/N 09-26210 ......... $26.50
Prevents seizure up to 1800F (982C). Lead free. Protects against seizure, heat-freeze, galling, rust and corrosion. Brushes easily. Highly adhesive on both wet and dry surfaces. Will not run, drip or settle out. Conforms to MilPRF-907E. Ideal for use on stainless steel and for joining dissimilar metals. Copper color 1/2 lb. can ................ P/N 09-02908 .................. $14.85
LPS Magnum Teflon Lubricant provides ultra-high lubricity, plus the additive strength of Teflon for high-temperature, high-pressure environments. In even the most demanding situations, extend equipment life and reduce maintenance. 11 oz.. Spray Can .......................P/N 09-26430 ......... $14.75
Meets FDA regulation for incidental food contact. Silicone-rich formula. Water-based formula. Colorless, odorless & non staining. Ideal for rubber and plastic surfaces. Eliminates sticking, binding and squeaking. Does not contain chlorinated solvents. Safe on most surfaces NSF H1 registered. 13oz. (368g) aerosol .............................P/N 09-26410 ...........$11.95
* Zinc purity greater than 99% * Works like a hot-dip on ferrous metals indoors and outdoors * Withstands water temperature up to 212F (100C) and continuous dry heat up to 750F (400C) * Commonly used as a flash rust preventive on welded areas * Long term protection * Flexible coating will not yellow, chalk, crack or peel * Electrochemically protects bare metal * Dries to touch in 3 to 5 minutes * 14oz. (397g) aerosol P/N 09-26425 ...........$19.25
* Heavy-duty performance * Power blast spray * Nonflammable * Removes oil, greases, dirt and tar * Nonchlorinated * Fast evaporating * Non-conductive * No rinsing * No residue * NSF C1 registration #129029: (aerosol); #129028: (bulk) * Canadian Food Inspection Agency (CFIA) approved 20 oz................P/N 09-26415 ...........$36.00
* High performance industrial cleaner that cleans on contact * Ideal for removing grease, tar, oil & adhesives * Fast acting, deep penetration * Natural based * Does not contain chlorinated solvents * Flash point above 100F (38C) * Non-conductive * Low residue * Safe on all metals and most plastics * Inverta Spray Valve allows user to spray in an upright or inverted position * NSF C1 registered #129025: (aerosol); #059830: (bulk) 15oz. (425g) aerosol ...............P/N 09-00311 ...........$15.75 1gal. (3.78l) ................................P/N 09-00312 ...........$91.75 5gal. (18.93l) ..............................P/N 09-00313 .........$388.00
All purpose, value lubricant which displaces moisture, loosens rusted or frozen parts and protects metal against corrosion. Does not contain chlorinated solvents or silicones. Safe to use on most surfaces. High flash point of 175F (79C). Inverta Spray Valve allows user to spray in an upright or inverted position. NSF H2 registration. 11oz. (312g) aerosol. P/N 09-00148 .............$7.25
* Penetrating action instantly removes oil, grease, wax, dirt, moisture, tar and other contaminants * Removes conformal coatings * No ozone depleting chemicals * Fast evaporating * Safe to use on most surfaces * Does not contain chlorinated solvents * No rinsing, no residue * Inverta Spray Valve allows user to spray in an upright or inverted position * NSF C1 registered #059845: (aerosol); #059846: (bulk) * Canadian Food Inspection Agency (CFIA) approved 15 oz. spray ..........P/N 09-26470 ...........$21.75
* Nonflammable * Removes oil, grease, wax, dirt, moisture, tar, brake fluid and other contaminants * Fast evaporating * Low odor * Quick penetration * No residue * Non-conductive * NSF K1 registration # 059809: (aerosol); # 059810: (bulk) 19oz. (539g) aerosol ...........P/N 09-26407 ...............$10.75 1gal. (3.78l) ............................P/N 09-26408 ...............$69.25
Reduced VOCs (Volatile Organic Compounds). Conforms to CARB (California Air Resources Board) requirements for. VOC emissions. Fast evaporating. Ideal for electronic and fine parts. Cleans and degreases delicate precision mechanisms. Safe on plastics. Penetrating action removes oil, grease, dirt, flux and other contaminants. Does not contain chlorinated solvents. No residue P/N 09-02045............................ $18.75 * Low VOC (Volatile Organic * Compounds) content * Complies with CARB/OTC (California Air Resources * Board/Ozone Transport Commission) Rules * Instantly removes brake fluid, dust, grease and oil * Improves brake performance * Helps stop disc brake squeal * Powerful jet spray and high solvency * Can be applied without disassembling the brake unit * No ozone depleting chemicals * Fast evaporating * Does not contain toluene * Does not contain chlorinated solvents * No rinsing or no residue * 14oz. (397g) aerosol P/N 09-02119............................ $11.75
* ATTENTION: Volatile Organic Compounds (VOCs) Government Regulations: Product cannot be purchased, sold or used in the states listed below. CA, CT, DC, DE, IL, IN, ME, MD, MA, MI, NH, NJ, NY, OH, PA, RI, VA
424
LPS PRODUCTS
LPS STRONG STEEL STICKS
Easy-to-use, hand-kneadable stick for immediate repairs to steel equipment and surfaces. Ideal for stopping leaks, even works on underwater applications. Permanently fills gaps and holes in metal, concrete, wood, fiberglass, and ceramics. Has a working time of 4 minutes, and will fully cure in 30 minutes to form a durable mass which can be machined, drilled, and painted. Can be used for many types of repairs, such as plumbing, electrical, ceramic, vehicle, equipment, and machinery. It is ideal for patching holes and cracks in pipes, drums, and tanks.4 oz. stick ................................................... P/N 09-26444 ....................$12.75 LPS SA-X X-treme Degreaser is ideal for removing grease, oil, tar, and dirt. LPS SA-X is water based and has a super powerful formula for cleaning machinery, equipment, parts, floors, and many other surface. SA-X can be diluted with water and it requires less product than traditional water-based cleaners in many applications. LPS SA-X X-treme Degreaser is available in a ready-to-use 28 fl.oz. trigger sprayer and bulk concentrate in a 1 gallon container, 5 gallon pail, and a 55 gallon drum. Features: Water-based, High Alkalinity - pH: 12.0 - 13.0, Super aggressive formula Non-flammable, Removes greases, oil, tar, and dirt, Economical: can be diluted with water Efficient: requires less product than traditional water-based cleaners to get the job done Rinses clean with no residue Safe on most metals, Trigger spray bottle is ready-to-use, Value Performance Specifications: Appearance: Red, Odor: Cherry Specific Gravity: 1.001.03 pH: 12.0-13.0 Boiling Point: >200 F Volatiles: >80% 12 oz. .......................... P/N 09-02605 ........................$7.75 Gallon ......................... P/N 09-02606 ......................$18.85 5 Gallon ...................... P/N 09-02607 ......................$79.50 55 Gallon .................... P/N 09-02608 ....................$584.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
LPS Electro 140 Contact Cleaner is the high flash point, fast penetrating, non-residue cleaner alternative to CFCs for fine parts. The Electro 140 Contact Cleaner flash point is above 140, making it safer to use in areas where flammability may be a concern. It is free of any known stratospheric ozone depleting substances - like CFCs, HCFCs, and 1,1,1 trichloroethane. Electro 140 has a low odor & is effective for flux removal and immersion cleaning. 11 oz.. Spray Can ....... P/N 09-26465 ........ $15.75
Warning: Due to VOC Regulations CA, OR, WA, CO states laws prohibit use, sell, or purchase of this product as of 01/2008.
LPS NoFlash is a vaporous solvent cleaner alternative to CFCs thats safe to use on most surfaces. Its nonconductive and nonflammable, so it can be used while equipment is in operation to avoid costly downtime. NoFlash Electro Contact Cleaner penetrates and evaporates quickly, dislodging oil, grease, dirt and other materials from precision mechanical and delicate electrical/ electronic parts leaving no residue. P/N 09-26412 ..........$32.75
Reduced VOCs (Volatile Organic Compounds) Conforms to the VOC regulations of CARB (California Air Resources Board), OTC (Ozone Transport Commission) and LADCO (Lake Michigan Air Directors Consortium) Quick penetration. Safe on plastics. No residue. Ideal for electronic and fine parts. Does not contain any chlorinated solvents. Removes dirt, dust, flux and other contaminants. NSF Nonfood Compounds Program Listed Category Code: K2 Registration # 142149. Inverta Spray Valve lets you spray in an upright or inverted position. Applications: Circuit Breakers , Connectors , Contacts Controls Fluid Systems Generators , Instrumentation , Keyboards , Magnetic Tape Heads , Motors Office Equipment, Printed Circuits , Relays ,Semiconductor Assemblies Sensors , Switch Gears , Switches , Telecommunication Equipment , Telephone Equipment, Terminals , TV Tuners Specifications: Size: 11oz, Surface Tension: 17.3 dynes/cm @77 F KB Value: 24, Specific Gravity: 0.64 - 0.66 @ 77 F Flash Point: 0 degree F, VOC Content: 74%, 48I g/L, 4.0l lb (aerosol) Propellant: HFC 134a Nonvoltiles: 50 ppm maximum P/N 09-02563 ......................$14.95
Quick penetration. Does not contain any chlorinated solvents. No residue. No rinsing. Fast drying. Safe on metal and plastics. Inverta Spray Valve lets you spray in upright or inverted position. Value Performance. P/N 09-00151 ........................$14.75 Warning: Due to VOC Regulations CA, OR, WA, CO states laws prohibit use, sell, or purchase of this product as of 01/2008. Replacement P/N for these states is # 09-02045* *On previous page.
Reduced VOCs. Instant cleaning action, no residue. Excellent for removing grease, grime, oil, and adhesives. High solvent strength. Moderate evaporation. Excellent alternative to Methyl Ethyl Ketone (MEK). Ideal for cleaning equipment. Not a Hazardous Air Pollutant (HAP). No ozone depleting chemicals (ODC). NSF registered category code C1, registration #142147. Inverta Spray Valve P/N 09-02372 ......................$16.75
A non-flammable contact cleaner that removes oil, grease, dirt and other foreign materials from precision mechanical and delicate electrical/electonic parts. Fast evaporating. No flash point. No rinsing. 15 oz.. Aerosol .............. P/N 09-00153 ...............$21.75
Hard film rust & corrosion protectant. Multi-year protection of metal surfaces. Resists dirt buildup, dripping & puddling during application. Penetrating, water-displacing formula. Excellent to use in high risk area. Inspectable, removable film. Resists water, acids, alkalis, salt spray, corrosive, elements.1 Gal P/N 09-00150 ...................$136.95
425
A modern blend of detergents and corrosion inhibitors designed to safely clean aircraft glass, plexiglass and other surfaces (pH 10.60.5). Applications include: Windows Interior surfaces Galley areas Overhead compartments. Not for use on energized equipment. 16 oz ................P/N 09-39630 .............$4.25 A halogenated solvent-based cleaner/degreaser that is chemically stable and extremely effective in heavy duty cleaning applications. Fast-acting, non-flammable, and evaporates quickly leaving no residue. Extremely effective solvent for cleaning and removing corrosion inhibiting compounds. Contains no HAPs. Removes carbon buildup. High dielectric strength of 26,800 volts. Allows for east visual inspection. Prepares metal surfaces for painting on adhesive bonding. Evaporates fast leaving no residue. 20 oz. aerosol.............P/N 09-39690 ..............$21.75 Attention:Volatile Organic Compounds (VOCs) Government Regulations: Product cannot be purchased, sold or used in the states listed: CA A revolutionary alternative to 1,1,1 Trichloroethane and other chlorinated solvents. Cleaner and degreaser that effectively removes grease, oil, dirt and other contaminants from motors, parts and equipment. Exhaust trails Hinges Antenna mounts Static tubes Wheel wells Struts & tubes Galleys Seat tracks Cargo doors Cargo tracks. Not for use on energized equipment. 20 oz P/N 09-39642 ................................... $19.00 A long-term corrosion inhibitor that provides extended protection for all metal parts and assemblies, both in storage and during shipment. Easily removed with solvent cleaners. Seat and cargo tracks Landing gear, wheel wells & keel beam Fuselage structure Wing to body fairing Pins Hinges Wing front & rear spar Lower fuselage interior Wing interior structure Horizontal stabilizer Ground support equipment Chains and cables Air conditioning ducts Lap joints Skin panel edges Emergency escape hatches Bulkheads Entry and cargo doors. Not for use on energized equipment. 20 oz. P/N 09-39655 ............................... $12.50 A long-term indoor and outdoor corrosion inhibitor for machined surfaces and assemblies subjected to long periods of storage or adverse conditions during shipment. Its firm, waxy film is highly resistant to humidity and salt spray and never becomes brittle. Petroleum solvents may be used to dilute the product to vary the film thickness or to remove it after application. Applications include: Completed assemblies Seat tracks Chains and cables Landing gear Wheel wells Faying surfaces Air conditioning ducts Lap joints Skin panel edges Fuselage Landing gear and bilges Emergency escape hatches Bulkheads Entry & cargo doors. Not for use on energized equipment.16 oz. P/N 09-39657 ....................................$14.75
AVIATION DEGREASER
CRC HV Switchgear Cleaner & Lubricant is a one-step cleaner, lubricant and corrosion inhibitor for metering. It penetrates to coat contacts and provides corrosion protection on switchgear mechanisms. The Power Jet spray nozzle allows application from greater distance overhead with a Hot Line tool adapter. HV Switchgear Cleaner and Lubricant is recommended for use on metering, distribution and substation class switchgear contacts, including URD and OVH applications. P/N 09-02611 ............................$22.85 An alcohol-based precision cleaner that is 100% free of CFCs. Ideal for applications where lower flashpoint solvents may be used. It evaporates rapidly and completely and is harmless to most plastics. Applications include: Switchgears Circuit breakers Telecommunication equipment Fusible connecting devices Motors Generators Relays Terminals Rheostats Instrumentation Communications equipment. Not for use on energized equipment. 16 oz.......P/N 09-39620 ...........$16.50 A solvent-based, high strength cleaner that effectively loosens and helps remove paint., adhesives and sealants. It helps protect equipment surfaces by eliminating damage caused by excessive scraping. Applications include: Dissolves and aids removal of paints, lacquers, adhesives and varnish Removes graffiti from metal and stone Removes conventional and formed-in-place gaskets on motors, pumps & flanges. Not for use on energized equipment.16 oz. ....P/N 09-39622 ... $10.95 A general purpose quick tack adhesive especially formulated to bond to many foils, plastics, papers, foams, metals, cardboards and cloths. P/N 09-02431 ........................... $15.65
A quick drying light-duty degreaser for use in industrial, electrical, electronic and aviation applications. Its 99% pure formula aggressively dissolves grease, dust, dirt, lint, oils and flux from most non-plastic surfaces. 12oz. .....P/N 09-02423 ............$9.50 Water-soluble formula removes corrosion quickly and economically. Neutralizes acid spills. Restores battery output and reduces voltage leakage due to contaminants. Assures maximum battery current flow and promotes longer battery life. 11 oz. P/N 09-02424 ......................................$8.25
Formulated to meet strict environmental requirements without sacrificing performance. It is a safe and versatile product for all of your cleaning needs. .........P/N 09-02419 .......... $33.85
CRC GREEN FORCE MULTI-PURPOSE CLEANER CRC GREEN FORCE HEAVY DUTY CLEANER
An environmentally preferable alternative to conventional water based solvent cleaners and degreasers. It quickly removes petroleum based soils such as grease, grime, and oil found in manufacturing environments. P/N 09-02420 ........................... $43.50
A unique penetrant that immediately drops the temperature of the area in contact with the spray. The freeze shock action cracks rusted surfaces allowing it to reach deeper & work more effectively than other penetrants. 11.5 oz. ...........P/N 09-02426 ............$8.95 Ideal where a dry lubricant is required or where petroleum products must be avoided. Resists dirt, dust and oil build-up. Wide effective temperature range up to 850F constant. 10 oz. P/N 09-02427 ......................................$9.95 Superior lubrication and durability in any weather or temperature. Perfect for use as a break-in lubricant for bearings or as a general purpose lubricant and corrosion inhibitor for tools, machinery and equipment. 10 oz. P/N 09-02428 ....................................$10.75
Ideally suited to clean soiled glass and other hard surfaces. It effectively cuts greasy films and soils, leaving surfaces sparkling clean. 32 oz. ......................P/N 09-02421 ......... $10.50 Gallon .....................P/N 09-02422 ......... $32.50
426
LUBRICANTS
Loctite Threadlocker used on a standard fastener can eliminate expensive locking devices while you increase the reliability and quality of your assembly. One drop prevents loosening. 2 removable strengths for large & small applications and permanent strength for locking parts you never want to take apart. #222 Threadlocker (permanent, for small screws) 10 ml...... P/N 09-42605...... $14.50 50 ml......P/N 09-42610 .. $39.65 #242 Threadlocker (removable, for large screws) 10 ml...... P/N 09-42615...... $16.75 50 ml......P/N 09-42620 .. $39.90 #262 Threadlocker (permanent, for large screws) 10 ml...... P/N 09-42625...... $16.75 50 ml......P/N 09-42630 .. $43.25 Excellent for use on exposed valve plungers, cylinder rods, and other o-rings. It lubricates without causing deterioration of rubber and is water resistant. Good for low pressure vacuum and pneumatic systems. 4 oz. tube ......P/N 05-00773 ....... $8.95 Anti-seize sealer for threaded aluminum alloy parts exposed to gasoline, oil, water, air or vacuum. Good lubricating qualities. Will not harden or set. Will not freeze joints at low temperatures. Non-corrosive, insoluble in gasoline, oil or water. 1 Lb. Can .............P/N 09-25200 ......... $44.50 Multi-purpose lubricant. Forms a wearing film on working surfaces. Excellent protection against rust and corrosion. Recommended for controllable pitch props, wheel and magneto bearings, general greasing. 14 oz. Can ...................P/N 09-25400 ....................$14.00 6 Lb.. Can ....................P/N 09-25500 ....................$64.75 Displaces moisture on any metal surface, preventing rust, corrosion or oxidation of the surface. Used on switches pulleys, wheel housings, seam areas. Non-gumming, non-conductivesafe for all electrical systems. 12 oz. Spray P/N 09-00347 ........ $8.50
LOCTITE THREADLOCKER
Penetrating lubricant with Teflon, corrosion inhibitors, moisture displacers and solvents to soften and remove dirt and corrosion. Will not cause corrosion. Use on aircraft cabin door hinges, landing gear hinges and struts. Loosens rusted bolts and other fasteners. 12oz. aerosol can P/N 09-42540 ...... $15.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PARKER-O-LUBE
Tri-Flow is revolutionizing the way you clean, protect and lubricate all of your moving parts with the introduction of Foaming Superior Lubricant and Foaming Citrus Cleaner Degreaser. Tri-Flows powerful foaming action clings to both horizontal and vertical surfaces to allow for deep penetration and accurate application. Tri-Flow Foaming products are ideal for use on bicycles, firearms, sporting equipment, manufacturing equipment, and more! P/N 09-02082 ...... $10.85
SEALUBE
A powerful blend of quick acting solvents to free parts frozen by rust, corrosion or paint. Harmless to metals. 11 oz. Aerosol Spray................ P/N 09-25800 ..................... $3.65 Inspection Lacquer is used in production on compression fittings, studs, nuts, parts, and assemblies after they are in proper torque or position. Widely used as Anti-Sabotage Lacquer. Inspectors can visually detect any movement or tampering; Torque Seal becomes brittle and will crack. Excellent adhesion to all metals and to most other surfaces. Dries fast. Torque Seal is packaged in convenient 1/2 oz. poly squeeze tubes. Available in 6 high visibility colors. Yellow ......................................... P/N 09-25807 ............................ $1.95 White .......................................... P/N 09-02411 ............................ $2.65 Blue ............................................ P/N 09-25809 ............................ $1.95 Green.......................................... P/N 09-25808 ............................ $1.95 Orange........................................ P/N 09-25810 ............................ $1.95 Red ............................................. P/N 09-02033 ............................ $1.95 F-925 Skydrol RESISTANT SEAL An inspection lacquer used in areas where aircraft hydraulic fluid (Skydrol) might come in contact with the seal. A fast drying material that has excellent adhesion to most substrates. It becomes hard and brittle so that visually any movement can be detected. Available in 1/2 oz. squeeze tubes. Color YELLOW and PINK Yellow ..........................................................P/N 09-25811 .............$3.25 Pink..............................................................P/N 09-03486 .............$3.10 Used on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position. Service personnel or inspectors can quickly spot any changes or tampering with equipment. Sentry Seal has excellent adhesion to metals, including aluminum, magnesium, titanium, stainless and copper, and is non-corrosive to these metals. It is packaged in handy metal tubes. Squeeze the tube to extrude the Sentry Seal through the small hole to form a bead (narrow stripe) across the parts. The surface dries in about one minute, then it will start to polymerize and become brittle as it dries completely. Available in blue. P/N 09-28512 .............................$4.80
LIQUID WRENCH
WD-40 PENETRANT/LUBRICANT
Lubricates and protects - MCKAY Graphite Spray lubricates and leaves a fast drying graphite film on all automotive, marine and industrial parts before and after assembly. Keeps gears, valves, heads, shafts, rocker arms, engines, transmissions and all metal parts operating quietly and efficiently by reducing heat and friction. Keeps valves and valve seats carbon-free. Leaves a dark metal-like finish that adds a high quality look to all repair work. prevents rust, corrosion and shelf deterioration. Non-abrasive, non-flammable, non-corrosive, non-toxic. Harmless to Anti-freeze and coolants. 12 Oz. Spray P/N 09-25600 ........ $4.15
EZ Turn is a specialty lubricant/sealant used for fuel and oil line valves and is resistant to high temperatures. It is expecially effective where high octane fuels and aromatics are present. EZ Turn is also extremely efficient as a gasket paste and anti-seize agent. EZ Turn will not gum, crack or dry out. Each shipment is independently tested. Excellent for tapered plug valves, aircraft engine manufacturing, and marine applications. EZ Turn is the functional equivalent of fuel lube. 5 oz. tube ..... P/N 09-00306 ...... $11.85 1 Lb. can ...... P/N 09-00180 ...... $22.75 Prevents galling, seizing and corrosion of metal parts from 65F to 2000F. Acts as a low speed lubricant and maintains a corrosionresistant coating at high temperatures. Makes aluminum and stainless steel joints disassemble quickly, easily. Excellent lubricant for press fit assembly. Works on industrial engine parts, boilers, outdoor motors, cables and internal combustion engines. Conforms to MIL-A-907D. Improves reliability at high temperatures. Saves time, labor. 1 oz. tube ............. P/N 09-28410 ........ $4.20
Loctite 598 Black High Performance RTV Silicone Gasket Maker retains high flexibility and oil resistance for longer gasket life. Temperature range is -75F to 625F (-59C to 329C) intermittent. Low odor, non-corrosive. Resistant to most chemicals and solvents. Fills gaps to 0.25. P/N 09-03532 .......... $26.50
This oiler has the famous Microlon resin suspended in a lightweight oil to lubricate, penetrate and prevent rust. It is excellent for lubricating bearings, threaded parts, hinges, pocket knives, chains, rollers, fishing gear, chain saws, guns, garage doors..... just about anywhere that friction causes noise and resistance. Furnished in a handy pen size oiler with a pocket clip. .25 Fluid Ounces. P/N 09-00756..........................$7.95
Loctite QuickStix C5-A Copper Grade Anti-Seize Stick provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. Protects metal parts to 1800F. Prevents rust, corrosion, seizing; eases disassembly. Fine or coarse threads. P/N 09-03533 ...... $14.25
427
LUBRICANTS
BOELUBE LUBRICANTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A Space Age Lubricant developed by The Boeing Company that fights friction at the interface of the cutting edge and theworkpiece. The reduction of friction at these surfaces minimizes heat generation and concurrent chip weld. Tools retain their cutting edge longer, leading to closer tolerances and prime chip yield. Manufactured frompersonal care ingredients, Boelube is non-toxic, non-irritating and biodegradable. Boelube is non-corrosive, non-flammable, chemically stable and free of halogens, heavy metals, sulfur, phosphorus, silicone, petroleum or paraffin wax. Drilling - Tapping - Reaming - Abrasive Belts - Files - Deburring Tools Grinding Wheels - Chisels - Band, Circular and Hand Saw Blades. Boelube Solids improve tool life by reducing heat build-up in belt, disc or wheel grinding operations. Apply the push-up tube to the tool before start up. Individual Boelube Blocks are ideal for grinding operations. 1.6oz Push Tube ........................... 09-01731 .............................. $3.55
BOELUBE 90 is non-toxic, non-irritating, environmentally safe synthetic lubricant that is effective for machining many types of materials. BOELUBE 90 will provide superior lubricity leading to better finish and longer tool life. BOELUBE 90 is compatible with Aluminum, Titanium, Graphite, Composites, Honeycomb, Inconel, Kevlar, Wood, Ferrous and Non-ferrous Metals. BOELUBE 90 is recommended for Drilling, Deburring, Broaching, Forming, Grinding, Milling, Gun Drilling, Routing, Reaming, Oil Hole Tools, Sawing, Punching and Tapping. BOELUBE 90 is best utilized in One-Shot or Mist Applications, and is ideal for applications where Cold-Cut or Positive-Lube units are utilized. 4oz Bottle ................................... 09-01734 ................................... $7.75 Gallon ......................................... 09-01733 ............................... $118.75
BOELUBE 70104 is non-toxic, non-irritating, environmentally safe synthetic lubricant manufactured from personal care ingredients that is effective for machining many types of materials. BOELUBE 70104 will provide superior lubricity leading to better finish and longer tool life. BOELUBE 70104 is non-corrosive, non-flammable, chemically stable, and free of Halogens, Silicone, Petroleum, Paraffin Wax, Sulfur, Phosphorus and Heavy Metals whether added or present in any of its ingredients. BOELUBE 70104 is compatible with Aluminum, Titanium, Graphite, Composites, Honeycomb, Inconel, Kevlar, Wood, Ferrous and Nonferrous Metals. BOELUBE 70104 is recommended for Drilling, Deburring, Broaching, Forming, Grinding, Milling, Routing, Reaming, Gun Drilling, Oil Hole Tools, Sawing, Punching and Tapping. Handheld lubricant ...........................09-01732 ..............................$8.50 Boelube Pastes provide excellent lubricity and are extremely cost effective in single point work such as Tapping, Drilling and Reaming. A small amount of Paste applied to the tool is all that is required to obtain a high quality finish and extended tool life with little or no clean-up required. Brush it on or dip tool in paste. Boelube pastes are also ideal for Forming and Bending as well as in Drop Hammer, Verson Press and Spin Forming applications. Boelube Pastes provide closer tolerance parts and extended diaphragm and die life. We furnish 70307 meduim (blue) paste. 4oz Jar .................. 09-01735....................................$6.95 JAD All Purpose Cleaner (MA-102) has the ability to remove heavy soils, grease oil, and carbon on Aircraft related surface and will not leave residue. It has been shown to remove fungus growth in hard to reach areas by Spray on Wipe-Off eliminating alcohol (ex. interior walls on aircraft) and rinses easily. Special ingredients are designed to clean the new non specular paint system or the semi-gloss system. Concentrate: Must add water. Specifications: Biodegradable: Yes, Poly X Wiring: Safe, PH: Below 10.0, Stability: Stable in hard or soft, hot or cold water, Odor: Low-Pleasant, lemon scent, Phosphates: None, Rinsibility: Superior-Streak Free, Cleaning Ability: Excellent. 24 oz. Spray ............................ P/N 09-03457 ...............................$14.95 5 Gallon ................................... P/N 09-03456 .............................$120.95 55 Gallon ................................. P/N 09-03466 .............................$698.00
JAD Hangar Deck & Flight Line Cleaner (MA-117) is a concentrated liquid compound especially formulated for use in cleaning aircraft carrier flight deck, flight line areas, and hangar floors. Formulated to be used manually or dispensed through automatic scrubbing machines. Creates less of a hazardous - slippery surface as with most hangar floor cleaners. The low foam characteristic makes it a desirable flight deck and flight line cleaning compound. Normally diluted 1 part cleaner to 1 part water for the first heavy duty scrubbing on heavily soiled surfaces. Dilutes 1 part cleaner to 19 parts water for normal flight deck and flight line cleaning. Specifications: Non-Flammable, Non ODS, Biodegradable, Non-Photochemically Reactive. 5 Gallon ................................... P/N 09-03465 .............................$150.95 55 Gallon ................................. P/N 09-03472 .............................$772.00 JAD Equipment Cleaner & Degreaser (MA404) is a biodegradable, true water-based cleaner, approved for total equipment wash. It comes ready to use and is extremely effective in removing greases, oils, hydraulic fluids and soils from flaps, wheels, wheel wells, and hard to degrease areas. Also excellent for cleaning racks and related components to remove carbon, grease and oil. Special ingredients are designed to clean the new Non-Specular paint system or the Semi-Gloss system. Non-Flammable, Low pH, Non-Carcinogenic, and Ozone Safe. 24 oz. Spray ............................ P/N 09-03464 ...............................$16.75 5 Gallon ................................... P/N 09-03463 .............................$209.95 55 Gallon ................................. P/N 09-03471 ..........................$1,788.00
JAD All Purpose Performance Cleaner (MA-102PRF) has the ability to remove heavy soils, grease oil, and carbon on Aircraft related surface and will not leave residue. It has been shown to remove fungus growth in hard to reach areas by Spray on Wipe-Off eliminating alcohol (ex. interior walls on aircraft) and rinses easily. Special ingredients are designed to clean the new non specular paint system or the semi-gloss system. Ready-to-use. Specifications: Biodegradable: Yes, Poly X Wiring: Safe PH: Below 10.0, Stability: Stable in hard or soft, hot or cold water, Odor: Low-Pleasant, lemon scent, Phosphates: None, Rinsibility: SuperiorStreak Free, Cleaning Ability: Excellent. 24 oz. Spray ............................ P/N 09-03459 ...............................$19.75 5 Gallon ................................... P/N 09-03458 .............................$209.95 55 Gallon ................................. P/N 09-03467 ..........................$1,772.00
(Average aircraft the size of Piper J-3, PA-11, PA-25, Aeronca, Taylorcraft)
45 ..Yards Ceconite 102 5 ..Gal. Non-Tautening Nitrate Dope 10 ..Gal. Non-Tautening Butyrate Dope 7 ..Rolls 2 Ceconite Tape 1 ..Ceconite Rib Lacing Cord 1 ..Ceconite machine Thread 10 ..Gal. Colored Butyrate Dope 2 ..Rolls 1/2 Reinforcing Tape 1 ..Gal. New Seam Fabric Cement 5 ... Gal. Nitrate thinner 24 ..Inspection Rings 100 ..Drain Grommets 30 ..Gal. Butyrate Dope Thinner 100 ... Drain Grommets 10 ... Gal. Silver Butyrate Dope
428
LOGO DECALS
Our full line of authentic aircraft logos are produced on state-of-the-art long lasting UV coated pressure sensitive adhesive vinyl. They are precision cut by a specially programmed computer and have no clear background. Other brands of decals can be produced cheaply but the clear background tends to yellow, rendering unsightly over time. With our custom cut decals, only the letters themselves go on the aircraft giving the lettering a truly professional look which will last as long as the aircraft paint. Please order by part number shown. Many other logos and styles are available, as well as other colors. Call for quotation or send $2.00 for our complete logo and decal catalog. For quote on custom logo decals, send sketch and details. FOR OTHER LOGOS AVAILABLE. Send $$2.90 FOR COMPLETE LOGO AND DECAL CATALOG P/N 09-43736
CM WP
5.75h x 13.25w Black ....09-43502 ..... $9.95 White ...09-43504 ..... $8.95
Black ................... 09-43558 Silver................... 09-43560 1.25h x 14.5w $13.95 ea Full Color ............ 09-43598 8.5h x 7.75w $9.95 ea
ME HA AP LG EP
1-5/8h x 10-3/4w Black ...09-43506 ... $11.95 White ...09-43508 ... $11.95
Full Color 09-43500 ............. $9.95 ea 1-Color 09-43602 ............. $8.95 ea 2-1/2h x 5-1/4w
Black 09-43646 ........... $13.95 ea White 09-43648 ........... $13.95 ea Gold 09-43650 ........... $18.95 ea 4-1/8h x 13-1/2w
Black ................... 09-43698 White .................. 09-43700 2.5hx 8.75 $17.95 ea Black ................... 09-43652 White .................. 09-43654 3h x 7w $14.95 ea Black ................... 09-43702 White .................. 09-43704 3h x 14.5w $13.95 ea
Black ................... 09-43519 White ................. 09-43522 Red ..................... 09-43524 Blue .................... 09-43526 6h x 10.5w $19.90 /pr
Black ................... 09-43612 1.5h x 11-3/8w $13.95 ea Black ................... 09-43576 White .................. 09-43578 4.5h x 9.5w $12.95 ea
CS IN EL AV
Black ................... 09-43528 White .................. 09-43529 Red ..................... 09-43532 Blue .................... 09-43534 6h x 10.5w $21.50 pr 17.5hx8.875w Gold Bkgrnd, Black Border P/N 09-43580 ....$37.90 pr.
Black ................... 09-43670 White .................. 09-43672 2.5h x 17-3/8w $11.95 ea Black ................... 09-43722 White .................. 09-43724 Gold outline on both. 3h x 5.5w $15.95 ea
Black ................... 09-43540 White .................. 09-43542 Gold .................... 09-43544 2h x 8.25w $12.95 ea.
TO PS BV
Black ................... 09-43546 White .................. 09-43548 4-1/4h x 10w $12.95 ea.
Black ................... 09-43632 Silver................... 09-43634 1.5h x 13w $12.95 ea Black ................... 09-43636 White .................. 09-43638 1.25h x 12.75w $13.95 ea
Black ................... 09-43550 White .................. 09-43552 1.75h x 10w $12.95 ea.
Small Black......... 09-43587 Small White ........ 09-43589 4h x 10w $22.75pr. Large Black ........ 09-43591 Large White ........ 09-43593 7.75h x 19w $35.90 pr. Red&Black w/Silver Bkgrnd 09-43640 2-1/8 x 61/2 $14.25 ea
Small: 4H x 8W Left..... 09-43732-1.. $14.75 Right .. 09-43732-2.. $14.95 Large: 6H x 12W Left..... 09-43734 ..... $17.95 Right .. 09-01955 ..... $17.95
Black ................... 09-43686 White .................. 09-43688 2.5h x 18-5/8w $8.95 ea.
429
LOGO DECALS
CM WP ME HA AP LG EP
09-43755(White) ............$18.00 ea. Full Color ........................ 09-43748 2h x 6.75w $7.95 ea Black ............................... 09-43782 3.25h x 3.25w $12.95 ea Black & Silver ................. 09-43751 1.25h x 8-3/8w $13.00 ea Black ............................... 09-43808 White .............................. 09-43809 2.5h x 12.75w $15.95 ea 3 .............09-43740 .........$4.95 ea 4.5 ..........09-43741 .........$6.95 ea Not available in lefts and rights only available as shown. Black ............................... 09-43746 2.25h x 6.75w $12.95 ea Black ............................... 09-43802 1.5h x 13w $9.95 ea Black ............................... 09-43829 White .............................. 09-43831 2.75h x 19w $13.95 ea
Left,Black ....09-43832 Right,Black .09-43833 Black ............................... 09-43780 White .............................. 09-43781 9.25h x 23.5w $18.95 ea 1.5h x 11.75w $25.95 ea.
Left, Black....................... 09-43837 Right, Black .................... 09-43838 1.5h x 7.5w $15.95 ea
Left, Black....................... 09-43784 Right, Black .................... 09-43785 5.25h x 5-3/8w $10.95 ea
CS
Black ............................... 09-43756 White .............................. 09-43757 3.5hx16-5/8w $23.95 ea
Left, Black....................... 09-43813 Right, Black .................... 09-43814 Left, White ...................... 09-43816 3h x 3.5w $17.95 ea
IN EL AV TO PS BV
Full Color-screened ........ 09-43764 8.25h x 9w $19.95 ea Black ............................... 09-43758 White .............................. 09-43759 5/8h x 8.25w $9.95 ea
White .............................. 09-43791 2-1/8h x 8.25w $10.95 ea Black ............................... 09-43774 4-3/8h x 10w $11.95 ea
Black ............................... 09-43792 9-7/8h x 46.75w $33.95 ea Black ............................... 09-43778 White .............................. 09-43779 4-3/8h x 10w $11.00 ea
Left, Black....................... 09-43824 Right, Black .................... 09-43826 Left, White ...................... 09-43827 Right, White .................... 09-43828 4-3/8h x 5-7/8w $13.95 ea
430
LOGO DECALS
CL-311-1-3/16h x 10-3/4w P/N 09-43981 (Blk) P/N 09-43982 (Wh) $10.95 ea. GL-016 3/4h x 5-1/2w P/N 09-44011 (Blk) $11.95 ea. PL-0191- 1/8h x 9-1/2w P/N 09-44043 (Blk) $11.95 ea. HB-124 4- 1/2h x 16-1/2w P/N 09-44077 (Blk) P/N 09-44078 (Wh) $19.95 ea.
CM
HB-098L&R- 5-1/4h x 13w P/N 09-44106 (Blk) P/N 09-44107 (Wh) $25.90 /pr
LE-001 - 3-1/8h x 10-1/4w P/N 09-44013 (Blk) P/N 09-44014 (Wh) $13.95 ea.
WP ME HA
CL-359 - 1-1/2h x 11-1/2w P/N 09-43985 (Blk) P/N 09-43986 (Wh) $13.95 ea. CL-179 - 1-1/2h x 15-1/8w P/N 09-43987 (Blk) $13.95 ea.
MR-001 1h x 5-1/2w P/N 09-44016 (Blk) P/N 09-44017 (Wh) $15.60 ea.
PL-091 3h x 23-1/2w P/N 09-44048 (Blk) $15.95 ea. PL-083 2h x 20-5/8w P/N 09-44051 (Blk) $15.95 ea.
HB-126 8h x 24-1/4w P/N 09-44079 (Blk) P/N 09-44080 (Wh) $25.95 ea.
HB-097L&R - 5-1/4h x 13w P/N 09-44108 (Blk) P/N 09-44109 (Wh) $25.95 ea.
ML-053L&R - 1-1/2h x 9w P/N 09-44018 (Blk) $25.90 ea. RL-018 6-1/2h x 7w P/N 09-44053 (Blk) $13.95 ea.
HB-096L&R - 5-1/4h x 13w P/N 09-44111 (Blk) P/N 09-44112 (Wh) $12.95 ea.
AP LG
CL-126 - 2-1/2h x 13-5/8w P/N 09-43989 (Blk), $13.95 ea. CL-299L&R - 1-5/8h x 24w 09-43992 (Blk) 09-43994 (Gd) $13.95 ea. CH-060 - 3/4h x 7-1/4w P/N 09-43997 (Blk) P/N 09-43998 (Wh) $12.95 ea.
HB-027 2-1/2h x 12w P/N 09-44084 (Blk) $21.95 ea. HB-015 - 3h x 6-1/2w P/N 09-44113 (Blk) $11.95 ea.
P/N 09-44021 (Blk) P/N 09-44022 (Wh) $16.70 ea. ML-017 1-3/4h x 18w P/N 09-44023 (Blk) $17.95 ea.
HB-102 - 2-1/2h x 14-3/4w P/N 09-44087 (Blk) P/N 09-44088 (Wh) $12.95 ea.
EP
HB-016 2h x 12w P/N 09-44116 (Blk) $11.95 ea.
RL-016 3h x 16-1/2w P/N 09-44058 (B/G) $15.95 ea. ML-012 - 1-1/2h x 4-1/4w P/N 09-44026 (Blk) P/N 09-44027 (Wh) $14.95 ea.
HB-046 - 3-1/8h x 10-7/8w P/N 09-44089 (Blk) $19.95 ea. HB-035 - 1-1/4h x 6-7/8w P/N 09-44118 (Blk) $9.95 ea. HB-090 - 3-1/4h x 12-1/2w P/N 09-44091 (Blk) $12.95 ea.
CS IN EL AV TO
CR-031 6-3/8h x 12w P/N 09-43999 (Blk) P/N 09-44001 (Wh) (up to 15w) $19.95 ea. ET-001 - 1-3/4h x 15-1/2w P/N 09-44002 (Blk) P/N 09-44003 (Wh) $14.95 ea.
NL-004 3-1/4h x 12w P/N 09-44028 (Blk) P/N 09-44029 (Wh) $19.95 ea. PL-128 - 2-1/4h x 18-1/2w P/N 09-44031 (Blk) P/N 09-44032 (Wh) $15.95 ea. PL-248 1-1/2h x 10w P/N 09-44033 (Blk) $12.95 ea. PL-073 - 1-5/8h x 14-1/4w P/N 09-44036 (Blk) P/N 09-44037 (Wh) $12.95 ea. PL-116 - 2-3/8h x 10-7/8w P/N 09-44038 (Blk) P/N 09-44039 (Wh) $12.95 ea.
VL-005 3h x 13w P/N 09-44063 (Blk) P/N 09-44064 (Wh) $14.95 ea.
HB-065 - 1-1/4h x 8-1/2w P/N 09-44121 (Blk) P/N 09-44122 (Wh) $9.95 ea. MS-070 2-1/2h x 20w P/N 09-44126 (Blk) $12.95 ea.
ET-002 - 1-3/4h x 15-1/2w P/N 09-44004 (Blk) P/N 09-44006 (Wh) $16.95 ea.
WL-004 - 3-1/4h x 15-1/4w P/N 09-44066 (Black, Gold, & Red) $29.95 ea.
HB-125 - 2-1/2h x 8-1/2w P/N 09-44093 (Blk) P/N 09-44094 (Wh) $10.95 ea.
FU-002 - 4-3/4h x 16-1/2w P/N 09-44007 (Blk) P/N 09-44008 (Wh) $17.95 ea.
PS BV
MS-061 -
GL-002L&R -4-1/2h x 15w (Full Color on Tail) P/N 09-44009 $39.95 ea.
PL-058 - 1-3/4h x 3-1/2w P/N 09-44041 (Blk) P/N 09-44042(Wh) $13.95 ea.
MS-061 3h x 3-1/2w P/N 09-44133 (Rd) P/N 09-44134 (Wh) $10.00 ea.
431
LOGO DECALS
CM WP ME HA AP
BE-0304.75h x14.5w $16.95 ea P/N 09-43929 (Blk) CL-164 BL-065 2hx10-7/8w $13.95 ea P/N 09-43932 (Blk), 09-43933 (Wh) (Black, White or OPT.) P/N 09-43962 (Blk) P/N 09-43963 (Wh) 1-1/2h x 15-1/2w $12.95 ea. AC-001 7h x 8w P/N 09-01967 White, Blue, & Yellow $9.90 ea AC-002 7h x 8w P/N 09-43221 White, Red, & Black $9.95 ea CL-340 - L & R P/N 09-43952 (Blk) P/N 09-43953 (Wh) 6h x 10-1/2w $21.90 pr. CL-214 - L & R P/N 09-43954 (Blk) P/N 09-43955 (Wh) 6h x 10-1/2w $19.95 pr. CL-487 - L & R P/N 09-43956 (Blk) 6h x 10-1/2w $19.90 pr. CL-032L & R P/N 09-43958 (Blk) P/N 09-43959 (Wh) 6h x 10-1/2w $19.95 pr. BE-0211/2h x 12w $11.95 ea P/N 09-43927 (Blk), 09-43928 (Wh) CL-454 (Black, White or OPT.) P/N 09-43960 (Blk) P/N 09-43961 (Wh) 1h x 27w $19.95ea.
1943 Between 29 June and 14 August, the official national insignia incorporated white sidebars and an overall red surrounding.
AL-007 - 1h x 8-1/8w $10.95 ea P/N 09-43922 (Blk), 09-43923 (Wh), 09-43926 (Silver)
STRAIGHT SLANTED WAVY WIDTH PRICE WIDTH PRICE WIDTH PRICE 4 7.5 $7.50 7-1/2 $8.50 4 $8.50 6 10.5 $9.50 10-3/4 $13.50 6 $11.50 8 14 $15.50 14-1/2 $17.50 8 $16.95 10 17.5 $21.50 18-1/4 $25.95 10 $26.85 12 20.5 $29.90 21-1/4 $34.95 12 $31.50 Please order by part number. Use basic part number at top of chart, and complete part number with height of decal. Example: Wavy flag, 8 high is P/N 09-43108. Prices per pair (left & Right).
LG EP CS IN EL AV TO PS BV
1943-1947 The red surround of the official insignia was quickly changed to a blue surround During its 4 years use this insignia appeared on more aircraft than all its predecessors combined.
1947-Present With the reorganization of the Defense Department and the creation of the USAF, red bars were added to the official national insignia. A variation of this insignia appears officially without the blue surround on F-15 aircraft.
P/N 09-432
STYLE 4A STYLE 6A
P/N 09-433
P/N 09-434
PRICING
SIZE Style 1 Style 2 Style 3 Style 4AStyle 6A 10 $65.00 $45.50 $49.95 $36.50 $25.00
1.5h x 18w White Left & Right (pair) P/N 09-43936 .....................$37.90 (Gold Wing Black type) Right side P/N 09-43934 ................$18.95 ea 8h x 7-3/4w P/N 09-43939 (Black, Red, Blue) $17.85 ea. P/N 09-43940 (Black) $11.95 ea CL-089 2h x 3-3/4w P/N 09-43941 (Full Color) $11.95 ea
BE-005 -
CL-297
(Black, White or OPT.) P/N 09-43964 (Blk) 1-1/2h x 10-1/4w $13.95 ea.
1917, 1921-1941 1942-1943 Introduced prior Some aircraft in to the American the European entry into World and MediterraWar I and offi- nean theaters cially adopted unofficially incorporated a after the war. yellow surround in British style.
15 $72.25 $52.50 $58.50 $42.50 $43.20 20 $87.50 $62.50 $69.75 $52.50 $45.00 25 $99.50 $74.50 $82.50 $64.50 $62.50 30 $120.50 $93.50 $115.95 $83.50 $75.50
CL-327
35 $175.50 $149.50 $155.50 $129.50 $101.80 Please order by part no. Use basic part no. under each style number and complete part no. with size of decal. Example: Style 3 decal in 25 size is P/N 09-43425
P/N 09-436-- P/N 09-439--
CL-178 CL-225 - L & R P/N 09-43942 (Blk) P/N 09-43943 (Wh) 6h x 10-1/2w $19.95 /pr CL-071 - L & R P/N 09-43944 (Blk) P/N 09-43945 (Wh) 6h x 10-1/2w $21.90 /pr CL-071 - L & R P/N 09-43946 (Blk) P/N 09-43947 (Wh) 6h x 10-1/2w $21.90/pr CL-257L & R P/N 09-43948 (Blk) P/N 09-43949 (Wh) 6h x 10-1/2w $21.90 /pr CL-112L & R P/N 09-43950 (Blk) P/N 09-43951 (Wh) 6h x 10-1/2w $19.90 /pr
Size 2-1/2 x 15 Size 2-1/2 x 11 Distinctive aircraft identification names, either stencils for painting or black vinyl lettering for easy press-on application. Aircraft Cessna Piper Vinyl Part No. Price/Set 09-33800 $8.50 09-34000 $8.50 Stencils Part No. Price/Set 09-33900 $10.95 09-34100 $8.50
CL-102 (Black, White or OPT.) P/N 09-43972 (Blk), P/N 09-43973 (Wh) 1/3/4h x 11-1/2w $12.95 ea. CL-485 (Black, White or OPT.)
PROPELLER DECALS
Sold In Pairs Only
Black 09-42838 ... $5.95 pr. White 09-02986 ... $5.95 pr.
432
DECALS - PLACARDS
Proudly display the Red, White, & Blue. Colorful vinyl pressure-sensitive U.S. Flag decals in right & left hand pattern. 2.5 x 4 .................P/N 13-01485 ..........$5.95 4 x 6.5 .................P/N 09-35400 ..........$7.85 6 x 10.5 ...............P/N 09-35500 ........$11.95
CM WP ME HA AP LG EP CS IN EL AV TO
This is an embroidered patch, oval in shape, and approximately 3-1/2, colors are Red/ White/Blue. ........... P/N 13-02703 ........ $3.50
CHECKLIST PLACARDS
PS BV
NO STEP DECAL - No Step, 1x5 Decal-black letters P/N 1040 .............................................$2.25 NO LIFT DECAL - No Lift Decal. Color: Black on
Emergency 09-42826 ........$2.75 Transponder Codes 09-42828 ........ $2.50 White. Size: 1/2 x 2-1/2 P/N 104212........................$1.35
433
DECALS - PLACARDS
CM WP ME HA AP LG EP CS IN EL AV
MFG BY AIRCRAFT SPRUCE All amateur-built aircraft must have a nameplate. Etch or stamp required data on this indestructible stainless steel nameplate. Conforms to FAA requirements. Size: 3x 4-1/4. P/N 09-01997 ................... $6.95ea
NAMEPLATE
Suitable for all aircraft. Made of .015 acid-etched stainless steel. Size: 3x 2. P/N 09-00761 ........ $3.35ea
These Passenger Warnings must be displayed in the cockpit of all amature-built aircrafts. The dry transfer passenger warning placards available in black, & white lettering. Actual Size of the Dry Transfer Placards: Simply remove the protective backing and 3.25w x .75h rub on the desired area. The vinyl placard has brilliant red lettering on a white background. Simply remove the paper backing and apply.
Actual Size of the Vinyl Placards: 4.25w x 1.125h
decal back. No EXPERIMENTAL Single-piece up 12 with adhesiveters. Oneneed to line individual let step operation. Just remove protective backing and apply to any clean surface. 2 black letters on clear Mylar base. Decal Size: 2-1/4 x 19. Set of 2..................... P/N 09-33400 ..................$4.95
LIGHT-SPORT DECALS - Similar to our EXPERIMENTAL Decals, complies with marking requirements for LSA. Available in: 2x14-1/4 Black on Clear ................ P/N 09-00762 ....................$2.25 Black on White ................ P/N 09-00782 ....................$2.25 White on Clear ................ P/N 09-00783 ....................$2.25 Bright red on white vinyl. Letters are 1 high. Decal size: 1-3/8 x 4-3/8. P/N 09-33500 .................. $1.25ea
1x5 Decal-black letters. P/N 1040 ............................. $2.25
FUEL OCTANE DECALS MIN. FUEL OCT. 80/87 MIN. FUEL OCT. 100/130
Handsome vinyl placards have brilliant red lettering on a white background. Simply remove paper backing and apply. Size: 1 x 2-7/8. 80/87 red on white ..............P/N 09-33610 ........$1.85 pr. 100/130 green on white ......P/N 09-33615 ........$1.85 pr. 100/130 red on white ..........P/N 09-33700 ........$1.85 pr. 100/130 red on white ..........P/N 09-33710 ........$1.85 pr.
THROTTLE
THROTTLE
DRY TRANSFER TYPE Over 200 pressure sensitive labels and words
conveniently grouped for ease of transfer to airplane controls or instrument panel. Available in two type sizes (see illustration) and in black or white lettering (specify). Large Black ......... P/N 09-34600 Large White ......... P/N 09-34700 Small Black.......... P/N 09-34800 Small White.......... P/N 09-34900 $9.75 Set
FACTORY BUILT - Aircraft ID plate factory built made of aluminum. Not FAA Approved. Engraving included. When ordering please provide: Make, Model, S/N, N# for factory built aircraft only. P/N 09-00447 .......................................... $13.95 EXPERIMENTAL ONLY - Aircraft ID plate factory built made of aluminum. Not FAA Approved. Engraving included. When ordering please provide: Make, Model, S/N, N# for factory built aircraft only. P/N 09-40000 .......................................... $13.95
TO PS BV
FUEL PLACARDS
80 Octane-half red/blue, round. P/N 09-42804 ....... $4.50 ea. 100 Octane, Low Lead Only Blue P/N 09-42806 ....... $4.85 ea. 100 Octane Only P/N 09-42808 ....... $4.50 ea.
HOMEBUILDERS TYPE Self-adhesive vinyl markings for the Long-EZ but applicable to many other aircraft. P/N 01-37800 ............$2.85 Set SOFT ALUMINUM DECALS P/N 09-34200 P/N 09-34300 Soft Aluminum Decals Letters are 1-1/4H X 3-3/4L with black lettering. $4.45 ea. 09-42801 .............. $12.95 pr.
FUEL 80/87 MIN. GRADE AVIATION GASOLINE or UNLEADED AUTO GASOLINE 87 MIN. ANTIKNOCK INDEX PER ASTM SPEC D-439
09-42814 ......................... $4.50 ea
P/N 09-34400
P/N 09-34500
434
PLACARDS
1x 5 ............P/N 09-42850 5/8x 3-1/4 .P/N 09-42842 1x 5 ...P/N 09-42844 .$2.50 ea 5/8x 3-1/4 ...P/N 09-42848 .. $2.50ea
INOPERATIVE
1x 5 ..... 09-42856 ..... $2.50ea 1/4x1-3/4 ...09-42862 .... $1.95ea
All the placards & decals on this page are produced on long lasting UV coated pressure sensitive adhesive vinyl. They are computer cut using no clear background so they wont yellow. These are all top quality decals which will enhance your aircrafts looks for years to come. Do not settle for cheap imitations. Highly recommended as the easiest and most effective way to apply painted 12 stenciled N numbers on any aircraft. These come prespaced and aligned horizontally or vertically and assure a professional looking job. Shipped factory-direct to you within 48 hours. Provide exact N number when ordering. Special order - Non-returnable. Please specify horizontal or vertical. 6 Characters on each strip or less. Made of Vinyl. 12 Strip (straight) (right/left)...............P/N 09-00287 .... $56.95 set 12 Strip (slanted) (right/left) ...............P/N 09-00288 .... $56.95 set
The fastest and easiest way to apply registration numbers. These numbers come pre-spaced and aligned and are ready to apply in one simple operation. These are top quality numbers which are shipped factory direct to you. Provide exact N number when ordering. 6 Characters max. on each) Color choices are black, white, red, blue, or gold. Standard type style is helvetica. Military block, drop shadow, or outline styles are also available. Please specify your N number, color, orientation, and print style in the special instructions of the online order form. Colors Available: * Black * White * Tomato Red (Light Red) * Cardinal Red (Dark Red) * Olympic Blue ( Sky Blue) * Bright Blue * Sapphire Blue * Light Navy * Metallic Gold * Metallic Silver * Green * Brown Note: Drop Shadow style is double the cost due to it being two colors. Straight 12 Strip (6 Characters max. on each) P/N 09-41910 ......... $56.95 pair. Slanted 12 Strip (6 Characters max. on each) P/N 09-41922 ........ $56.95 pair. Slanted 12 Drop Shadow Strip (6 characters max. on each) P/N 09-03434 ....... $112.95 pair We now offer new 12 vinyl N numbers as now required for return flight to the U.S. from foreign countries. Available in black, gold, red, white or blue. Numbers are slightly slanted. Basic part number is 09-387xx. Second to last digit is for color. 1 Black, 6 Gold, 7 Red, 8 White, 9 Blue. For last digit, put in number or letter needed. Please Note: N-Numbers ship via priorty mail only to all U.S. domestic customers. See our website for a complete listing of Part Numbers Slanted 12 Individual #s ................................... $10.25 / pair
CM WP ME HA AP LG EP CS IN EL AV TO
Vertical or horizontal lettering individually spaced and aligned. Advise number. Stencils will be made-to-order and shipped in about two weeks. Straight Set of 2 (Right/Left) ...............P/N 09-00289 .... $13.50 set Slanted Set of 2 (Right/Left) ..............P/N 09-00290 .... $13.50 set
Individual vertical numbers and letters. Pressure sensitive vinyl for easy application. Black only. No slanted numbers available. Basic part no. is 09-3310x. For last digit, put in number or letter needed. ..........$1.25 ea. Helvetica Straight ..... $4.50/letter Helvetica Slanted ........... $5.25/letter Monument Block......$9.00/ letter Monument Block Slant.. $9.00/ letter Vinyl Figure 3 Slant Black # 3 ................... P/N 09-02386............. $1.75 Vinyl Figure 3 Slant Black # 5 ................... P/N 09-02387............. $1.75
N4804K N425WT
N2510T N100MD
N6979N N51ER
Precut sticky paper masks for spraying registration numbers. Used by Piper and other aircraft manufacturers. Order two of each character for vertical stencils. Slanted stencils are furnished in pairs (R/L), so order one pair of each character. Order by part number. For last digit, put in number or letter needed. 3 Inch Vertical Figures ........................P/N 09-3280x ....... $1.25 Ea 12 Inch Vertical Figures ......................P/N 09-3290x ....... $6.25 Ea 12 Inch Slanted Figures......................P/N 09-3300x ......$13.50 Pr Painting Options: These stencils offer you two methods of spraying lettering incorporated in a single stencil. You can: (1) Letter after the body color has been applied or (2) Letter before the body color has been painted. This second method provides recessed, protected lettering and eliminates masking.
Number Strips assure handsome registration numbering in minutes. Complete made-to-order 3 registration number on adhesive application strip individually spaced and aligned (NOT A FILM). Lay strip on aircraft and remove backing. Permanent number remains bonded to aircraft. A real time saver. Will outlast paint - look better. Available in black, white or gold. Vertical or horizontal lettering. Specify vertical or horizontal lettering and color. Colors Available: * Black * White * Tomato Red (Light Red) * Cardinal Red (Dark Red) * Olympic Blue ( Sky Blue) * Bright Blue * Sapphire Blue * Light Navy * Metallic Gold * Metallic Silver * Green * Brown 3Straight ........ Right & Left ............. P/N 09-00294 ............... $17.25 set 3Slanted ........ Right & Left ............. P/N 09-00302 ............... $14.95 set Letter styles available for your aircraft. 3 and 12 vinyl strips.
PS BV
Allows for stenciling of every letter and number. NOTE: Illustration is portrayal of item you actually receive - each kit contains 3, 12 and 24 sizes. P/N 09-42831 ........... $43.75
435
PLACARDS
80 100 OCTANE
ONLY 09-42604 $4.50ea 09-42809 $0.65 ea. or 10 for $4.88
80/87 OCTANE
ONLY 09-42817 $4.50ea
100 OCTANE
ONLY 09-42608 $4.50ea
JET FUEL
ONLY 09-42821 $4.50ea
ONLY THE OF THIS AIRCRAFT IS PERMITTED TO
WARNING PILOT
THIS DOOR
09-42823
$2.50ea
Aircraft Model Helicopter (Universal) Single Engine (Universal) Mooney M20/21 Piper PA28 Cher/Warrior/Archer II Piper PA32 Cher/Lance/Saratoga Piper PA32 Apache/Aztec Piper PA34 Seneca I/II/III Piper PA30/39 Twin Comanche Piper PA31T/42T Cheyanne Cessna 100/200 Cessna 300 Series Cessna 400 Series Cessna 425/441 Cessna Jet 500 Series Beech Bonanza V35 Beech Baron 55/58 Beech Duke 60 Beech Queen Air 65/88 Beech King Air 200/300 Beech Jet 400 Series Exterior Kit Beech King Air Saber Jet 40/60 Hawker Jet 500 Westwind Jet 1100 Gulfstream 690-1000 Challenger Jet 600 Falcon Jet 10/20 Lear Jet 20 Series Lear Jet 30 Series Lear Jet 50 Series Rockwell 112/114 Rockwell Gulf Stream 690
P/N 09-44201 09-44202 09-44203 09-44204 09-44206 09-44207 09-44209 09-44211 09-44205 09-44213 09-44210 09-44220 09-44235 09-44245 09-44216 09-44251 09-44217 09-44218 09-44250 09-44255 09-01956 09-44219 09-44280 09-44223 09-44224 09-44227 09-44228 09-44260 09-44265 09-44231 09-44232 09-44233
Price $37.50 $37.50 $49.95 $42.75 $48.75 $62.00 $62.75 $66.75 $131.95 $29.95 $133.95 $83.50 $112.00 $172.95 $96.85 $123.95 $133.95 $157.00 $162.95 $238.75 $154.95 $193.00 $164.00 $209.00 $244.95 $169.00 $139.95 $165.00 $198.95 $165.00 $53.85 $131.00
Die cut decal kits are available on request. Call for quotation.
436
GYROS
An air operated instrument which indicates aircraft attitude through 360 in roll & 360 in pitch. The pictorial airplane remains fixed during gyro operation but may be adjusted by the pilot for changing conditions. The upper half of the horizon bar and the mask are light blue color. Sky is blue and ground is brown. Zero pointer and airplane wings are yellow. Numerals and markings are white on dull black background. Vacuum port and air inlet ports 1/4 NPT. Gauge port 1/8 NPT. Size: 3-3/8x 3-3/8x 6-3/8. Wt:1.9lbs. Standard equipment in production Cessna & Piper aircraft. If instrument panel is tilted, special order gyro is required.*Lighting tray must be purchased to attach to the bezel for lighting.
Model 5000B .................................................P/N 5000B .................$939.00 Model 5000B-20 (Black/Blue)........................P/N 10-00389 .........$1,022.00 Model 5000B Lighted (tray sold separately)..P/N 10-01071 ......... $1,118.00 Model 5000B with 8 panel tilt .......................P/N 5000B-42 .........$1,080.00 Model 5000B-F w/Vacuum Failure Flag ........P/N 5000B-F...........$1,152.00 Model 5000B w/Fail. Flag...............................P/N 10-00132 .........$1,316.00 5000B Light Tray 14V....................................P/N 10-00111 ..............$54.75 5000B Light Tray 28V....................................P/N 10-00112 ..............$54.75
Model No. RCA26EK-11 RCA26EK-12 RCA26EK-13 RCA26EK-14 RCA26AK-1 RCA26AK-2 RCA26AK-2-8 RCA26AK-3 RCA26AK-4 RCA26AK-4-8 RCA26BK-2 RCA26BK-6 RCA26BK-8 RCA26BK-9 RCA26BK-12 MS3116E8-4S 444-0011-01
Lighted bezels have anti-reflective glass. Lighted gyros do not include lamp trays. All gyros calibrated for zero degree panel tilt. Mating Connector not included with gyro. FAA Certified as a primary or standby gyro (FAA advisory circular AC20-41A) Approved to (Shown with optional Replace you turn coordinator (FAA advisory circular slip indicator installed) AC91-75) Optional Features: * Panel Tilt Inclination: 0 to 10 degrees, Standard tilts 0, 5, 7-1/2, 8, & 10 * LightingL 5, 14, 28 Vdc external lamp tray, 12-inch leads. * Incliometer: Slip Indicator, ball type, bezel mounted. * Mating Connector: Part No. 10-02756 Specifications: * Panel mount: Standard 3-1/8 inch round cutout, rear mount * Length: 8.1 inches maximum * Weight: 2.6 lbs. maximum, C/G 3.25 inches from mounting face * Input Power:14Vdc input-1500 mA starting & 1400 mA running; 28Vdc input-600 mA starting & 550 mA running. * Dial Presentation: Fixed pointer, rotating dial, with symbolic airplane. * Operating Temperature Range: -30C to +50C, -22F to +122F * Certification: FAA TSO-C4c * Limited Warranty: 12 Months from date installed / 6 months shelf life. All lighted gyros must order tray separately. Standard 28 Vdc, Lighted Bezel, and Slip Indicator... P/N 10-02748 .$1,983.00 Standard 14 Vdc, Lighted Bezel, and Slip Indicator... P/N 10-02749 .$1,967.00 Standard 28 Vdc, Lighted Bezel ...................... P/N 10-02750 .$1,895.00 Standard 14 Vdc, Lighted Bezel ...................... P/N 10-02751 .$1,895.00 Standard 28 Vdc, and Slip Indicator ................ P/N 10-02752 .$1,895.00 Standard 14 Vdc, and Slip Indicator ................ P/N 10-02754 .$1,896.00 Standard 28 Vdc .............................................. P/N 10-02753 .$1,870.00 Standard 14 Vdc .............................................. P/N 10-02755 .$1,745.00 Mating Connector ............................................ P/N 10-02756 ......$76.85 Lamp Tray, 14 Vdc, 12-inch leads ................... P/N 10-02757 ......$59.50 Lamp Tray, 28 Vdc, 12-inch leads ................... P/N 10-02758 ......$59.85 The RCA22 Series of vacuum artificial horizon are controlled by air driven precision gyros to present the pilot with pitch and roll information. The attractive color scheme of blue sky and brown ground presents a realistic spherical display of flight. Unless otherwise indicated all instruments have a dark blue/ brown display, fixed pointer and are unlighted. This is the standard display. Instruments equipped with a warning flag will let you know when vacuum has dropped below 3.8 inch Hg. Flag retracts from view at 4.3 inch. Hg. Instrument fits in a standard 3 1/8 panel cutout. Meets of exceeds all requirements of FAA TSO C4c
and Aeronautical Standard AS396B.
The RCA26 Series is the top of the line and has been designed for precision and reliability. The RCS26EK Series is a 12-30VDC instrument. You have a choice of a fixed or moveable pointer, and a 14 or 28 volt lighting. Performance characteristics include roll indication of 360. Pitch 30. Pitch trim range 7. Slip Indicator can be added upon request. Mating connector (MS3116E8-4S) is also available. Pictured is the RCA26EK-11 Description Part No. Price Fixed Pointer, unlit. Tilt must be 10-02524 $2,076.00 specified at the time of order. Fixed Pointer, lighted. Voltage and 10-02526 $2,171.00 tilt must be specified at time of order. Moveable pointer, unlit. Tilt must 10-02527 $2,088.00 be specified at time of order. Moveable pointer, lighted. Voltage and tilt must be specified at time of 10-02528 $2,229.00 order. Standard look, 14V, Lighted, Move- 10-00608 $2,192.00 able pointer, Stationary roll dial. Standard look, 14V, Lighted, fixed 10-01683 $2,195.00 pointer, moveable roll dial. Standard look, 8 Tilt, 14V, Lighted, 10-00392 $2,187.00 fixed pointer, moveable roll dial. Standard look, 14V, Moveable 10-01118 $2,079.00 pointer, sationary roll dial. Standard look, 14V, Fixed Pointer, 10-01392 $2,079.00 Moveable roll dial. Standard look, 8 Tilt, 14V, Fixed 10-00391 $2,064.00 Pointer, Moveable roll dial. Standard look, 28V, Lighted, Move- 10-01119 $2,196.00 able pointer, Stationary Roll Dial. Standard look, 28V, Fixed Pointer, 10-01393 $2,098.00 Moveable Roll Dial. Standard look, 28V, Moveable 10-01120 $2,078.00 pointer, Stationary Roll Dial. Standard look, 28V, Lighted, Fixed 10-00466 $2,187.00 pointer, Moveable Roll Dial. 5 Tilt, 28V, Lighted, Moveable 10-01122 $2,196.00 pointer, fixed roll dial Connector 10-00791 $24.95 A slip indicator/inclinometer for all the RCA26 series & RC Allen 10-04623 $149.95 vacuum horizons
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model No. RCA22-7 RCA22-7-8 RCA22-7F RCA22-11 RCA22-11 RCA22-11 RCA2211F RCA2211F RCA22-15
Description Standard display, tilt must be specified at time of order. Standard Display, with 8 Tilt. Standard Display with a warning flag. Standard display, lighted 14V, Tilt must be specified at time of order. Standard display, lighted 28V, Tilt must be specified at time of order. Standard display, lighted 28V, 8 tilt Standard display, lighted, with a warning flag. (14V) Standard display, lighted, with a warning flag. (28V) Display is blue over black Tilt must be specified at time of order.
Part No.
Price
10-01371 $759.00 11-03607 $759.00 10-00504 $858.00 10-00502 $856.00 10-01391 $856.00 10-03635 $856.00 10-00094 $967.00 10-03574 $977.00 10-01109 $766.00
Fully adjustable LCD screen is bright and highly visible. There are two models to choose from; The RC 2600-2, which is a 2 inch instrument and the RCA 2600-3, which is a 3 inch instrument. Same size as traditional RCA 2600-2 RCA 2600-3 horizons and can be easily installed in a standard panel cutout. FAA TSO-C4c certified and is designed to be a direct replacement for any Electric Attitude indicator. Totally electronic and contains no mechanical gyro. These light weight instruments are ideal for light sport and home built applications. The precision and stability qualities of these instruments also make them suitable for larger aviation applications such as business aircraft and rotorcraft. The RCA 2600 is capable of aerobatic type maneuvers with a full 360 degrees of pitch and roll without the typical tumbling of mechanical gyros and without any harm to the instrument. Similar to our RCA 26EK Series horizon gyro and RCA 15EK Series Directional gyro, the RCA 2600 Series instrument is multi-volt and can be installed in either a 14 volt or 28 volt aircraft. The unit is self-contained and installs just like a standard horizon. RCA2600-2 (2 Inch Gyro) ........P/N 11-07324 ....$2,596.00 RCA2600-2 with 8 tilt ..............P/N 11-09199 ....$2,573.00 RCA2600-3 (3 Inch Gyro) ........P/N 11-07325 ....$2,595.00 RCA2600-3 with 8 tilt ..............P/N 11-08142 ....$2,635.00 2600 Inclinometer Option .........P/N 10-03862 .......$147.50 A battery-based emergency power unit designed to give you at least an hour of auxiliary power when you need it the most. Paired with the new RCA 2600 Digital Horizon, the ESP can provide up to 6 hours of backup power. The ESP can be easily mounted behind the instrument panel and can power your new R.C. Allen instrument, or retrofit your existing Attitude gyro in an emergency. Comes complete with a wire harness and panel-mounted status light. Recharges itself during flight and does not drain the aircraft battery when aircraft power is off.FAA TSO-C179 14V ..................... P/N 10-04171 .......................$625.00 28V ..................... P/N 10-04525 .......................$625.00
437
GYROS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
5000B-36 Sigma Teks Attitude Gyros are selected as standard equipment by aircraft and autopilot manufacturers worldwide. They are the recognized industry leaders, offering features and options that improve safety and enhance pilot convenience. The unique warning flag and cageable options are significant features extremely useful upgrades for owners of light general aviation aircraft. The warning flag model instantly alerts the pilot to a loss of pneumatic power, especially important during busy operations when panel scanning is focused on the attitude gyro. The unique cageable attitude provides for quick erection and display alignment; a high priority for aerobatic aircraft owners and for aircraft operations that require short stops. Sigma Teks highly reliable and proven attitude gyros are available with electrical pitch and roll outputs for autopilot and other stabilization applications. ARINC style bezel, display graphics, colors, inclinometer, internal lighting, and various panel tilts are all available options. Sigma Tek Gyros can be customized for compatibility with any instrument panel. An air operated instrument which indicates compass headings through 360 degrees. The gyro is functional during dives, climbs or banks up to 55 degrees displacement from level flight. Dial has matte white numerals and markings on a dull black background. Vacuum port and air inlet ports 1/4 NPT. Gauge port 1/8 NPT. Size: 3-1/4 x 3-1/4 x 6-1/2. Wt. 2.6 lbs. Standard equipment in production Cessna and Piper aircraft. New manufacture. * All lighted units must purchase light tray separately. Model 4000B (Unlighted).............................P/N 4000B ..........$941.00 Model 4000B-31 (Lighted - Tray sold separately) .P/N 10-00588 ..$1,080.00 Model 4000B w/ Heading Bug.....................P/N 10-00469 ..$1,170.00 4000HR-3 w/Bug ( Tray sold separately) ...........P/N 10-00095 ..$1,363.00 Model 4000C Autopilot DG..........................P/N 4000C .......$1,697.00
RCA11A-8 RCA11A-15 The RCA-11A series of vacuum directional gyros utilize and air driven precision gyro that controls a vertical rotating azimuth gimbal. The R.C. Allen Model RCA11A has been designed to provide a long life of accurate operation even when subjected to severe operating requirements. This instrument is engineered with a minimum of machined parts, providing lower initial cost and lower maintenance cost through its lifetime. The RCA11A is non-tumbling within 85 limits in pitch and roll and can be easily installed in any 3 1/8 panel cut out. Full freedom design allows accurate indication, even after extreme maneuvers. Stainless steel is used at wear points, with aluminum investment and die casting. A knob is provided to reset the gyro, when compared to the magnetic compass. the RCA11A-8 features the standard display. Meets of exceeds all requirements of FAA TSO C5c and Aeronautical Standard AS397. Dimensions: Length: 6.7 Height: 3.4 Width: 3.4 Weight: 2.3 Pounds Model No. Description Part No. Price RCA11A-8 Standard Display 10-01370 $759.00 RCA11A-8F Standard Display with Flag 10-01680 $857.00 Cardinal Heading markers N., S., RCA11A-15 10-00390 $883.00 E., & W. (Piper/cessna display) RCA11A-16B RCA11A-17B RCA11D-4 RCA11D-5 RCA11D-7 Standard Display, Lighted, 14 10-01369 $972.00 Volt. Standard Display, Lighted, 28 10-01389 $796.00 Volt Single Pointer, 400hz Autopilot 10-01117 $1,494.00 with heading bug. Dual Auto Pilot with Heading 10-03430 $1,494.00 Bug With Heading bug Only 10-02931 $1,375.00
Lighted gyro is compatible with S-Tec autopilots (S-Tec Model 6406) Gyro Only ............ P/N 10-00587 ...........$2,126.00 Accessories 14 Volt Light Tray P/N 10-00111 ................$54.75 28 Volt Light Tray P/M 10-00112 ................$54.75
These units are factory-overhauled gyros that are like new and carry the same warranty as a new units. Provided installation is within 6 months of factory ship date, full replacement warrarnty is 12 months from date of installation. Exchange core must be a like core* and the core must be returned no later than 20 days from the invoice date to receive core credit. *Like cores include: any 4000B series Sigma Tek/EDO-Aire core as exchange for a 4000B-30 any 5000B series Sigma Tek/EDO-Aire core as exchange for a 5000B-36 *All lighted units must order light tray separately. 4000B-30 Description Sigma-Tek Model No. Our PN Core Price Attitude Gyro 5000B-36 10-03360 $275.00 $525.00 Directional Gyro 4000B-30 10-03359 $275.00 $519.00
Replace Troublesome Learjet DN-101 or DN-104 Gyros with Dependable 10,000 Hour Sperry/Honeywell Gyros The Insight Gyro 4000 is based on the best heading system in the industry, the Sperry/Honeywell C-14A. The C-14A rotors are equipped with long life ceramic bearings rated for 10,000 hours. Combining the C-14A with special interface circuitry in a compatible package, the Gyro 4000 is a plug-in replacement for the old JET DN-101 or DN-104. STCd for Learjet: 23, 24, 25, 28, 29, 31, 35 and 55 DN-101,104 equipped Learjets as a direct replacement. P/N 11-05199 ............$8,893.00
The RCA15 Series electric directional gyro employs and electrically driven gyro motor and is a direct reading, azimuth indicator. Rotor run up time is 3 min. They have a built in inverter which converts aircraft DC power to the required AC voltage and frequency. May be used in both fixed wing and rotor wing aircraft and is easily installed in standard 3 1/8 panel cut out. Power failure flag drops into view when Pictured is supply voltage is lost or has dropped below a level RCA15AK-1 for proper operation of the gyro. Azimuth indication range 360. Altitude operation -1,000 to 40,000 feet. Internal 3 phase inverter prodeces high starting torque and increases gyro roto speed. Internal lighting provides even light distribution at any intensity level. calibrated to an accuracy of 3 maximum drift error after 10 minutes of 1.5 scorsby motion. Electrical Requirements: Starting Current @ 14 VDC: 2.4A Max Running Current @ 14 VDC: 1.2A Starting Current @ 28 VDC:; 1.4A Max Running Current @28 VDC .6A Reccomended Circuit Breaker 3A Dimensions:Length: 6.7 Width; 3.4 Height: 3.4 Weight; 2.3 pounds Meets of exceeds all requirements of FAA TSO C5c and Aeronautical Standard AS397.
Model RCA15AK-1 RCA15AK-2 RCA15BK-1 RCA15BK-2 RCA15AK-16 RCA15AK-17 RCA15BK-16 RCA15BK-17 Description 14 VDC, Lighted 14 VDC 28 VDC, Lighted 28 VDC 14 Volt, 400HZ, 5K. 14 Volt,Heading Bug only. 28 Volt, 400HZ, 5K. 28 Volt,Heading Bug only. Part No. 10-01681 10-01390 10-01682 10-00501 10-02530 10-02529 10-02533 10-02532 10-00791 10-04623 Price $2,195.00 $2,089.00 $2,195.00 $2,079.00 $2,889.00 $2,738.00 $2,889.00 $2,738.00 $24.95 $149.95
Accessories
MS3116E8-4S Mating Connector Mini Slip Indicator - Add 444-0011-0 this to your new or current Electric Gyro Horizon. Replaces 444-0007-01.
438
GYROS
Engineered as a primary or standby artificial horizon in fixed-wing aircraft and helicopters, this indicators single connection makes installation a snap. This indicator is standard equipment on many OEM aircraft including the Beech Baron and Bonanza. Featuring 10-32 volt DC operation, antireflective glass, long-life lighting and 7,500 hours MTBF, this is a cost-effective and safe alternative to unreliable vacuum systems. 4300-311 - 10/32V, lighted, 0-20 Without btty P/N 10-00751...................$3,395.00 4300-313 - 10/32V, Lighted, 0-20, Delta P/N 10-03899...................$3,395.00 Emergency power supply MD420 .. P/N 11-05540...................$2,075.00
This Gyro Horizon is controlled by an air driven precision gyroscope to present the pilot with pitch and roll information, through the full 360 pictorial presentation leads to faster interpretation of airplane attitude. A zero pitch adjustment knob is provided. Dims: 3-1/8 x 3-1/8 x 8 max. Similar to Air Italia Gyros. NonTSOd for Experimental Aircraft Only ..........P/N 10-22955 .........$577.00 Gyro with 8 tilt ............................................P/N 10-02242 .........$671.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FEATURES: Weighs just 1.8 lbs. One pound less than most electric directional gyros Multi-voltage 1032 volt DC, remains valid until the aircraft main battery discharges to 10VDC Direct replacement for many AIM205 and RC Allen RC15A units Designed specifically for use in high vibration applications Warning flag monitors rotor speed and power input Anti-reflective glass enhances visibility and reduces fatigue Approved to FAA TSO-C5e and RTCA DO-160E Requires less than half the power of standard DG units Long-life LED lighting, user selectable to 5, 14 or 28 volt input One year limited warranty SPECIFICATIONS; Power Input: 1032 VDC, Current Rating: At 14 VDC Start: 1.4A Max., Run: 0.44A nominal, At 28 VDC Start: 0.6A Max., Run: 0.22A nominal, Lighting: Internal LED lighting switchable to 5, 14 or 28 VDC input; wired through main connector, Weight: 1.9 lbs., Length: 4.7 inches, MTBF: 2,500 hours, Mating Connector: MS3116F8-4S ,Mounting: Rear panel mount in standard 31/8 round panel cutout 3300-10 no lighting .............................P/N 10-02821 .....$3,295.00 3300-11 14V LED Lighting .................P/N 10-04773 .....$3,706.00 3300-11 28V LED Lighting .................P/N 10-04774 .....$3,706.00 Mating Connector MS3116F8-4S .......P/N 10-00791 ..........$24.95
This factory new electric attitude gyro fits the standard gyro instrument cut-out. Features push-to-cage knob, low power/power failure flag, longer life & reliability due to lower operating temp.; Black case, black adjustment knob, & bright yellow/green airplane marker with sky blue/brown ground dial. Roll & loop without worry. Size: 6.4, Wt: 2.4 lbs., Power: 14VDC req. MS3116E8 connector (included). Non-TSOd for Experimental Aircraft Only.
Description Artificial horizon, 14V Artificial horizon, 14V, lighted Artificial horizon, 14V, 8 tilt Artificial horizon, 14V, 8 tilt, lighted Artificial horizon, 28V Artificial horizon, 28V, lighted Connector for electrial gyro Part No. Price 10-04671 $1,525.00 10-04672 $1,598.00 10-04673 $1,499.00 10-04674 $1,598.00 10-00102 $1,598.00 10-00103 $1,733.00 10-00791 $24.95
Fly with confidence and peace of mind with the Lifesaver gyro. Even if every other system in your aircrafts avionics panel goes dark, the Lifesaver powers on. The only attitude indicator with a selfcontained battery backup, it delivers one full hour of emergency attitude reference. 1 hr of precious time to pull you through when trouble strikes and all other power fails. Optional sli p indicator can be installed anytime. No removal of gyro necessary. Benefits: Field replaceable lighting, Anti-reflective glass enhances visibility and reduces fatigue, Battery life 3 years in average aircraft environment, 10-32 VDC replacement for use in either 14 or 28V aircraft, May be installed in place of an existing turn coordinator or turn, and slip indicator per FAA advisory circular AC91-75. 14V Gyro With Battery ...........................P/N 10-00750 ......$4,075.00 Slip Indicator ..........................................P/N 10-00764 .........$223.95 Remote Battery Mounting Kit ................P/N 10-00763 ........$241.95 Replacement Battery Pack ....................P/N 10-01054 ........$249.95 3/32 Front Mount Adapter ....................P/N 10-00765 ..........$86.75 1/2 Front Mount Adapter ......................P/N 10-00766 ........$151.00
The vertical rotating azimuth card is controlled by a precision gyroscope air-driven. The directional gyro will give correct heading information through 60 of aircraft attitude in roll and pitch, 360 in yaw. A caging knob is provided to reset the gyro to the magnetic compass. Similar to Air Italia Gyros. NonTSOd for Experimental Aircraft Only. P/N 10-22950 ........ $576.00
The Directional Gyro is a gyroscopic navigation instrument designed to provide the pilot with a constant directional reference that is not subject to characteristics of a magnetic compass that cause errors. The vacuum type is operated by the air flow generated by the aircrafts vacuum system while the electrical type is operated by the aircrafts power supply. Non-TSOd for Experimental Aircraft Only.
Part No. Price 10-01798 $1,519.00 10-01796 $1,549.00 10-01799 $1,578.00 10-01822 $1,526.00
Size Model No. Description 3-1/8 DG02E-3H 14V with heading indicator 3-1/8 DG02E-3HL 14V, lighted, with heading indicator 3-1/8 DG02E-3BH 28V with heading indicator DG02E3-1/8 28V, lighted, with heading indicator 3BHL
Falcon gyros can tolerated some aerobatic flight, but aerobatics can reduce the life of the gyro. It is recommended that the gyros be rem oved when the aircraft will be performing extensive aerobatic maneuvers. The Falcon electric gyros have caging knobs, but the vacuum gyros do not.
The high quality electric attitude indicator replaces the turn and bank and may be installed in the same panel location, freeing up crowded panel space. Installation of these units is straight-forward. It has an inclinometer for use in standard rate turns and a failure warning flag to indicate loss of gyro RPM. When used together with the Castleberry Emergency Power Unit, Model EPU 28-24RMT, this instrument provides the pilot with a welcome margin of insurance in case of aircraft electrical power failure. Features: Inclinometer Power failure flag Pull to cage knob Backlit Standard 3 1/8 in. diameter Model No. Description Part No. Price 300-14EL 14V Gyro ** 10-02823 $2,395.00 300-14EL 14V Gyro With 8 Tilt 10-02828 $2,195.00 300-14EL 28V Gyro With 8 Tilt 10-02829 $2,385.00 300-14ELP 300-14EL With Auto Pilot outputs.* 10-02826 $3,592.00
*Please Specify at time of order 14 or 28V or tilt if desired. **Light Tray required.
TSOd emergency power supply, Model EPU 2824RMT that can replace some older non TSOd units made by Terra and AIM that are no longer in production. This unit provides a 24 VDC output up to 5 Amps for 30 minutes for emergency buss power to operate the standby attitude gyro with extra capacity of up to 4 amps for other critical instrument or avionics. This is economical insurance in a 7.5 pound package for aircraft frequently involved in IFR operations. Emergency Power Supply EPU-2 ................P/N 11-05822 .... $1,272.00 EPU Connector.............................................P/N 11-07713 ......... $71.00 Rack Mount and Connector for EPU-2 .........P/N 11-05823 ....... $286.00 Component Maintenance Manual.................P/N 11-00187 ....... $441.95
439
400 Series replacement clutches for Rapco standby pneumatic systems are available in 12 volt or 24 volt. They can be purchased either new or as an overhauled exchange. A core charge will be added to the purchase price of exchange units and refunded with the return of a repairable 400 series core. Description Description Price 400 NEW clutch, 12V 10-02656 $766.00 400 EXC Clutch, 12V 10-23949 $428.95 Remanufactured exchange
Short stops (engine off less than twelve minutes) and some aerobatic maneuvers may cause your attitude gyro to tumble or precess from its vertical reference. When the rotor is spinning, the gyros normal erection system is slow and can take several minutes to correct a large erection error. This non-locking caging feature allows the pilot to quickly align the gyro display and rotor to gyro case reference. The attitude gyro should only be caged for quick alignment during straight and level VFR flight using well defined earth horizon for reference or prior to take off. All lighted gyros must order tray separately. P/N DESCRIPTION PRICE 5000B Standard Gyro, Unlighted (non-cageable) $939.00 5000B-F Standard Gyro w/Vacuum Failure Flag (non-cageable) $1,152.00 5000M-1 With Caging Knob, 0 Panel Tilt $1,695.00 5000M With Caging Knob, 0 Panel Tilt, Lighted $1,598.00 5000M-2 With Caging Knob, 8 Panel Tilt $1,552.00 5000M-5 With Caging Knob, 8 Panel Tilt, Lighted $1,656.00 5000B-46 With Inclinometer, 0 Panel Tilt $1,295.00 5000B-45 With Inclinometer, 0 Panel Tilt, Lighted $1,465.00 5000B-51 With Inclinometer, 8 Panel Tilt $1,295.00 5000B-53 With Inclinometer, 8 Panel Tilt, Lighted $1,895.00 5000M-3 With Caging & Inclinometer, 0 Panel Tilt $2,079.95 5000M-6 With Caging & Inclinometer, 0 Panel Tilt, Lighted $2,033.00 5000M-4 With Caging & Inclinometer, 8 Panel Tilt $1,979.00 5000M-7 With Caging & Inclinometer, 8 Panel Tilt, Lighted $2,081.00 10-00111 5000B Light Tray 14V $54.75 10-00112 5000B Light Tray 24V $54.75 The revolutionary VAC-2 adapter provides a direct replacement for the Lycoming vacuum pump pad adapter casting. The VAC-2 design provides a standard vacuum pump pad with provision for inverted oil pick-ups. Normally there is a T fitting mounted on the firewall that supplies the inverted oil. For many engines when this T fitting is used, the oil pressure will drop down into the yellow on the oil pressure gauge for three to five seconds when inverted. On some aircraft this drop in oil pressure will cause the prop to cycle because of lack of oil pressure. With the VAC-2 adapter installed you do not have this drop in oil pressure. By using the VAC-2 adapter you have (1) the best inverted oil pickup, (2) a stock vacuum pump pad adapter. Used in place of Christen T fitting. The VAC-2 comes complete with oil seal installed, gaskets. and MS 20822-10D fitting. Just slip vacuum pump gear assembly and washer into VAC-2 and install on engine. The standard Lycoming vacuum pump gear assembly and washer will fit into the B & C adapter. (Gear and washer shown are not included.) VAC-2-4 for 4 Cylinder Engines ...........P/N 07-06790 .........$185.00 VAC-2-6 for 6 Cylinder Engines ...........P/N 07-06795 .........$185.00 Manufactured by Precise Flight, Inc., this Standby Vacuum System, SVS V, is a new solution to the old problem of in-flight vacuum pump failures. It operates on a differential between manifold pressure and ambient pressure which is directed through a shuttle valve system to drive the flight instruments. When the vacuum pump fails, the pilot simply turns on the SVS system and adjusts engine power settings while observing the instrument suction gauge to obtain adequate differential to operate the instruments. Kit includes low vacuum light and installs in 2-4 hours. STCd for most aircraft. This kit can provide peace of mind on all flights and, if that pump ever fails, can be a real life saver. P/N 10-00400...........................$485.00
The instrument Source Warning indicator for Pressure systems is designed to alert pilots of the loss of pressure prior to the gyros tumbling. This early warning can be critical in giving the pilot enough time to react to the situation properly and avoid spatial disorientation. The kit connects to the pressure gauge via a tee fitting and will only work on aircraft equipped with PRESSURE systems. This generally is confined to various Beech Bonanza models. Please double check your system type before ordering this kit. This kit is not STC'd but is usually installed as a minor modification. P/N 11-08458 .............$79.95
The Precise Flight Vacuum Warning Indicator will provide the pilot with immediate warning of failure of the vacuum system, providing valuable time prior to gyro failure. An inexpensive system that can alert the IFR pilot immediately in the event of vacuum failure. P/N 11-02205 ............................ $79.95
VENTURI
2 VENTURI - This small aluminum venturi
provides 2 Hg vacuum for operating turn/bank indicator. Has 1/8 NPT port. Use 1/4 tubing for hookup. Wt. 3.5 oz. P/N 15045 ........... $47.50 4 VENTURI - This venturi develops 4 Hg suction from double-throat venturi and 10 long horn. Used to operate a directional gyro or gyro horizon. When operating a directional gyro there is sufficient capacity to also operate a turn/bank. All aluminum construction. May require a suction regulator. Wt. 0.9 lb. ....... P/N 15050 ..... $66.85 9 VENTURI - This super venturi is similar in appearance to the 4 venturi but with redesigned air passages and a recontoured, long (11-1/4) horn. It pulls enough vacuum to operate a gyro horizon, directional gyro and a turn/bank. Must be used with a suction regulator. P/N15052 .......... $69.75
The Aero Safe Guardian I Standby/ Pressure system is designed to provide the pilot with the most reliable standby source of instrument air available for single engine aircraft. STCd for most Bellanca, Beech, Cessna, and Piper single engine aircraft. Specify aircraft make, model, year, and serial number when ordering. Vacuum system ........P/N 10-00267 ..... $2,033.00 Pressure system .......P/N 10-00268 ..... $2,159.00
Prices Subject to Change Without Notice
440
Built-in voltage regulator allows it to be used in either 14V or 28V systems. Small, compact unit and weighs only 1.2 lbs. Incorporates a small power out warning window which is black when normal current is being supplied but turns red in the case of electrical power failure. This turn and bank is now being used in many production aircraft. New installation requires electrical connector and cable clamp. New manufacture by Electrical Gyro Corp. Size: 3-3/8 x 3-3/8 x 3-3/4 long. Unlighted ....................................P/N 1234T100 ........$979.00 14V Bezel-Lit ..............................P/N 10-22614 ......$1,183.00 28V Bezel-Lit ..............................P/N 10-22628 ......$1,183.00 MS3106A-10SL-3S Electrical Plug Connector.............$13.95 MS3057-4A Cable Clamp ..............................................$4.60 The unit is an electrically-driven gyroscope. The inclinometer, by movement of a ball in relation to the lubber lines, indicates the slip angle of the aircraft while in a turn. A power flag drops into view whenever the voltage drops below a level which is required for proper operation of the gyro. It incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power supply system. It has a DC-AC-DC converter. Power Supply: 10-30VDC, Electrical Consumption: Max. 1.0A at 11-26VDC Max. 0.35A at 26 to 30VDC, Operating Range: 2 min. Turn, Weight: 18 oz./0.5 kg, Length: approx. 5 inchesUnlit ...................................P/N 10-22515 ......$1,059.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Engineered for a long service life, the new B model turn coordinator features a proven AC rotor powered by a solidstate inverter. This creates less heat behind the panel. By utilizing a brushless rotor design, this instrument has one of the top ratings in the industry 4800 hours MTBF. A direct replacement for most 3-pin turn coordinators, it is perfect for use in high-performance aircraft and cold-climate applications. The well-known Z models are an industry standard. Value priced and reliable they are in more aircraft than any other brand. All 3-inch turn coordinators operate from 10 to 32 volts DC for convenience and reliability. 1394T100-7Z 10-32v, UNLIT ...................P/N 1394T100 ...........$728.00 1394T100-3Z 14v, LIT ..............................P/N 10-22514 ............$896.00 1394T100-10RB (Cessna, KAP 140, Autopilot) P/N 10-02311 .........$1,575.00 MS3106A-10SL-3S Electrical Plug Connector .P/N 10-00789 ..............$13.95 MS3057-4A Cable Clamp.........................P/N 10-00959 ................$4.60 Note: 3A & 8A models have brushless rotors to reduce air noise
Certified to FAA TSO C3b. OEM standard - proven reliablity. Includes power warning indicator. Features: 4500 hours MTBF, more than double the original Z design Brushless AC rotor operates on 14 or 28 VDC. Proven reliability through HALT (Highly Accelerated Life Testing) requirements and OEM usage since 1999. Improved Off warning flag pulls out of view when rotor is up to speed. Is a direct replacement for the popular 1394T100-7Z and most standard 3-pin turn coordinators. 1394T100-7B Unlighted 12-32V ...............P/N 10-02108 ............$874.00 28V unit- 14V Bezel Lighting ....................P/N 10-01024 .........$1,036.00 Unlighted G300A Autopilot, ARC .............P/N 10-02653 .........$1,580.00 1394T100-14RB Low Wing Turn Coordinator Autopilot - For use on low wing aircaft. ..............................................P/N 10-04022 .........$1,575.00 3-1/8 cut out, 3-3/4 long. Small and lightweight, excellent for homebuilt aircraft. For 14V or 28V systems. Features power out warning flag. Unlighted. Includes electrical plug connector and cable clamp. Unlit 0 Panel ..........................P/N 10-22510 .........$493.00 Unlit 8 Panel ..........................P/N 10-02261 .........$498.95 Lit 0 Panel ..................................................P/N 10-02262 .........$599.00 Lit 8 Panel ..................................................P/N 10-02263 .........$584.00 Connector MS3106A-10SL-3S ....................P/N 10-00789 ...........$13.95 Cable Clamp MS3057-4A............................P/N 11-04969 .............$6.75 The basic flight instrument for co-ordinated turns. Available in two styles: Rectangular model fits easily in cramped panel space. Square model matches a 2-1/4 instrument hole, fits on either side of the panel. Both feature finely crafted metal cases and precision ball and tube assemblies. Square .......................................... P/N 10-03812..........................$89.95 Rectangle ..................................... P/N 10-03857..........................$89.50 In turning, instantly register slightest departure from the correct banking angle. Bank scale has white markings on black background. New manufacture. Available in 2 models: 10-10 Scale, 2.25 between mounting holes.P/N 10-00600 ... $103.95 20 - 20 Scale, 5 between mounting holes... P/N 10-00700 ..... $62.75
instrument is powered by an electrically driven DC precision gyro with an inclinometer. It gives the pilot turn and bank information. The RCA56 series is an all volt instrument, with a power warning flag, a black or white ball inclinometer and either lighted or nonlighted. DIMENSIONS: Length: 6 1/4 in. Max Width: 3 3/8 in. Max Height: 3 3/8 in. Max Weight: 1.9 lbs. Meets or exceeds requirements of FAA TSO C3bNew manufacture by A.I.D. RC Allen. New installation requires plug connector & cable clamp. RCA56-3B, UNLIT........ P/N 10-01684 ................$899.00 RCA56-3BL, LIT ........... P/N 10-02138 ................$876.00 Plug Connector ............ P/N MS3106A-10SL-3S...$13.95 Cable Clamp ................ P/N MS3057-4A0...............$4.60
Similar to the air driven model but the gyroscope is electrically driven. Connection is by electrical plug. Power: 14 or 28V DC. New manufacture. 28V, 4 Min Turn Yellow markings P/N 10-03429.....................$1,180.00 14V, 2 Minute Turn...................... P/N 10-00499.....................$2,000.00 14v, 2 Minute Turn 14/28 V Lit ..... P/N 10-02587.....................$1,235.00 Plug Connector............................. P/N MS3106A-10SL-3S$ ........$13.95 Cable Clamp................................. P/N MS3057-4A ........................$4.60 AN5820-1 Turn & Bank indicator completely overhauled and certified to FAA requirements. Fresh matte-white dial markings with doghouses. Power: 1.8 to 2.2 Hg vacuum produced by a 2 venturi or vacuum pump. Size: 3.25x 3.25x 4.75 long. Weight: 1.5 lbs. 1 year warranty.P/N AN5820-1 .......$526.00 Consists of an overhauled and certified Turn & Bank indicator, 2 venturi, hoses, fittings and instrument screws. P/N 10-00300 .........$593.00
Widely used in the turbo-prop market as standard equipment, this dependable instrument fits into the tightest panel space. The AC brushless rotor offers great reliability. Internal lighting options of 5, 14 and 28 volt offer greater flexibility. These were factory installed on the DeHavilland Dash 8 and Boeing Chinook CH47 14V Turn & Slip ..................... P/N 10-00305 ............................$1,858.00 28V Turn & Slip ..................... P/N 10-00310 ............................$1,858.00 Plug Connector...................... P/N MS3106A-10SL-3S ................$13.95 Cable Clamp.......................... P/N MS3057-4A ...............................$4.60
This in-dash mounted inclinometer is lightweight and fits a standard 2-1/4 instrument hole. Used on Kitfox aircraft & ideal for virtually any homebuilt. P/N 10-00705 ......$53.00
441
Kit includeds Vacuum Pump Vacuum Regulator Vacuum Gauge Gyro Filter Asssembly 6-5/8 Hose & Clamps 6-3/8 Hose & Clamps 4-1/4 Hose & Clamps Pump Inlet & Outlet Fittings Gyro Inlet Fittings Gyro Outlet Fittings Gyro to Vacuum Gauge Fitting Installation Instructions Model 215CCHK ................... P/N 10-02004 .............$884.00 Model 216CWHK .................. P/N 10-02005 .............$766.30 Model AA3215CCHK ............ P/N 10-01134 .............$925.00 Model AA3216CWHK ........... P/N 10-01135 .............$903.00
Cooling shrouds have been proven to reduce pump operating temperature and therefore extend service life. Testing has proven reduction in operating temperature by as much as 15%. Saves money - extends service life of dry air pumps. AA20T fits all 200/240 series pumps. AA40T fits all 400 series pumps. Sigma - Tek pumps are not eligible. AA207 ..........................P/N 10-02796 .........$57.50 AA40T .........................P/N 10-02797 .........$59.90
Tempest Wear Indicator Tool Kit. Kit includes: 3 Star Lockwashers (82-50122-2A2), 3 Hole Plugs (82-50122-2A1), 1 WIP Tool (82501222A6T) P/N 10-04814 ........$38.75
Electric auxiliary dry air pumps are recommended for single engine aircraft flown in IFR conditions as a back-up in the event the primary vacuum pump fails. These pumps are FAA-PMA approved as direct replacements for Airborne pumps previously installed under STC eligibility and STC approval for these pumps for many additional aircraft is pending. 28VEC .................. Electric Auxiliary Dry Air Pump Model AA4A2-1 ..... P/N 10-00585............$1,438.00 14VEC .................. Electric Auxiliary Dry Air Pump Model AA4A3-1 ..... P/N 10-00584............$1,644.00 Tempest dry air pumps, from Aero Accessories, are 100% new production and use all new components. They are FAA-PMA approved replacements for like and similar models on many installations. These pumps are available in the 200, 240, and 400 series. The AA215CC series come with a 1-year, unlimited hour warranty and the AA241CC, AA242CW, and the AA441CC and AA442CW series come with a 1-year, 500 hour warranty. Warranties expire 2-years from date of manufacture. $100.00 Core Charge applied to Overhauled Pumps *Core Rebate available for new pumps.
10-24800-1 $451.95
10-23600-1 $594.00
442
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PNEUMATIC FILTERS
MODEL AAD9-14-3 AAD9-14-5 AAD9-18-1 AA2J4-4 AA2J4-6 AA2J4-7 AA1J7-1 AA1J7-2 ARB3-5-1 DESCRIPTION Filter Filter Filter Filter Line Mounted Filter Line Mounted Filter Gyro Filter Assembly Gyro Filter Assembly Garter Filter PART NO. 10-00923 10-00924 10-01354 10-01946 10-01946 10-01947 10-01948 10-01949 10-01333 PRICE $18.75 $18.95 $18.90 $33.85 $33.85 $33.85 $41.75 $49.95 $2.95
MISCELLANEOUS PARTS
MODEL 82-06768 82-50130B 82-50130BP 82-50195 82-50195P 82-50195A 82-50195AP 82-50155DP AA9144 AAD5-77-1 AAF7-236-1 AAF7-236-2 DESCRIPTION PART NO. PRICE Coupling 10-01951 $63.25 Flange Gasket 10-01952 $2.40 Flange Gasket-Package of 10 10-01953 $25.85 WIP Plug-New Pumps Only 10-01954 $4.90 WIP Plug-New Pumps Only-Pkg. of 10 10-01955 $43.75 WIP Plug-O/H Pumps Only 10-01958 $7.75 WIP Plug-O/H Pumps Only-Pkg. of 10 10-01959 $61.50 LRT Diverter Kit 10-01961 $12.50 Prop Governer Gasket 10-01962 $14.75 WIP Plug-O/H Pumps Only-Pkg. of 10 10-01963 $38.25 Aux. Switch 14 Volt DC 10-01964 $342.95 Aux. Switch 28 Volt DC 10-01965 $343.95
443
$200 CORE CHARGE Due to a shortage of cores Vacuum / Pressure regulators may not be in stock. Customer may need to ship their unit to Aircraft Spruce for overhaul.
AV TO PS BV
$200 CORE CHARGE Due to a shortage of cores Vacuum / Pressure regulators may not be in stock. Customer may need to ship their unit to Aircraft Spruce for overhaul.
444
CM WP ME HA AP LG EP CS IN EL
RA1K8-6-10 - This 152 fitting with 5/8 hose and 3/8 NPT is used in most outlet threaded ports of 200 series vacuum pumps and is a FAA PMA direct replacement for the Airborne. P/N 10-00396 ....... $38.75 RA1K31-4-6-4 - This 3/8 and 1/4 hose, 1/4
NPT, T fitting is used in most threaded ports of the flight instruments and is a FAA PMA direct replacement for the Airborne Model 1K31-4-64. P/N 10-00397 ...........$24.75
RA1K10-4-6 - This 3/8 hose, and 1/4 NPT fitting is used in most inlet threaded ports of the flight instruments and is a direct replacement for the Airborne Model 1K10-4-6. ........ P/N 10-00398 ......................................$14.75 RA1K10-6-10 - This fitting with 5/8 hose and 3/8
NPT is used in most inlet and outlet threaded ports of the 200 series vacuum pump. The fitting is 5/8 hose with 3/8 NPT threads. The Rapco, Inc. fitting is a FAA PMA direct replacement for the Airborne Model 1K10-6-10.. P/N 10-01849 ...............$27.75
Kit with RAP215CC Pump - For engines with COUNTER CLOCKWISE turning accessory drives. ...................... P/N 11-00099 ........... $698.00 Kit with RAP216CW Pump - For engines with CLOCKWISE turning accessory drives..................................... P/N 06-00635 ............ $698.00 Kit Without Pump.................................... P/N 10-02010 ............ $527.00
Fully adjustable, cleanable, and rebuildable. (2) 1/2 NPT ports make it fully adaptable to all aircraft. Vacuum Regulator/Firewall Adapter............P/N 10-00769 ........ $385.00 Adapter, 5/8 x 1/2 hose.............................P/N 10-00770 .......... $95.00 Adapter, 5/8 x (2) 1/2 hoses .....................P/N 10-00771 .......... $95.00 Adapter, 5/8 x (2) 3/8 hoses .....................P/N 10-00772 .......... $95.00
This valve is used in many MultiEngine General Aviation applications. The Rapco, Inc. FAA PMA MultiEngine manifold check valve is a direct replacement for the Airborne Model 1H5-1. P/N 10-01131 ........ $737.00
Our supplier remanufactures run-out Pesco and Garwin wet pumps to factory specifications. FAA Approved. Note: Pump Drive is included.
Basic Kits These FAA/PMA kits include rotor, vanes,gasket, and drive coupling. For Airborne 211/212 Pumps P/N 10-00901 .......... $98.50 For Airborne 200 cc/cw Pumps P/N 10-00902 .......... $99.85 For Airborne 241/242 Pumps ......................P/N 10-00903 .......... $85.95 For Airborne 441/442 Pumps ......................P/N 10-01001 ........ $147.95 Deluxe Kits These FAA/PMA kits include rotor, coupler, external spline, bushing, blades, nut, cushion washer and band gaskets. Washer and gaskets not included on 200CC kits. Installation instructions included.For Airborne 211/212 pumps .................P/N 10-01901 ........ $143.95 For Airborne 241/242 pumps ......................P/N 10-01903 ........ $187.95 For Airborne 441/442 pumps ......................P/N 10-01904 ........ $187.95
Pesco 194 pump ......................................P/N 10-00028 ........ $474.00 Pesco 207 pump ......................................P/N 10-00029 ........ $579.00 Garwin G455 pump .....................................P/N 10-00027 ........ $479.00 Garwin G450 pump .....................................P/N 10-00026 ........ $479.00 Add $125.00 core charge to purchase price. Like cores in repairable condition may be returned to Aircraft Spruce West for full core credit. Return cores via UPS and reference invoice number.
AV TO
215/216 Pump Stator Housing 82-50122A P/N 10-00919 ..........................$80.75 $15.00 Core Charge 241/242 Pump Stator Housing 82-50122-1 P/N 10-00920 ........................$108.95 $35.00 Core Charge 441/442 Pump Stator Housing 82-50122-2 P/N 10-00921 ............................$256.95 $15.00 Core Charge
The Airwolf 3P194-F pump incorporates new manufacturing techniques, employs superior bearings to those found in dry pumps, an dis machine to extremely tight tolerances. Replaces all 211/212, 215/216, 242/244 Series Airborne / Champion / Rapco / Tempest / Dry Vacuum Pumps, Pesco 3P194-F Garwin G-455 Wet Vacuum Pumps & Sigma Tek 1U128006 Dry Vacuum Pumps, regardless of direction of pump rotation. This pump works on ALL aircraft that do not have deice boots. Comes with a 2,000 hr, 10 year warranty Airwolf Factory Warranty. $100.00 Core charge applies. P/N 10-00707 ................... $1,599.00
PS BV
445
VACUUM PUMPS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
RAPCO FAA approved quality dry air pumps are available in brand new replacement models or overhauled. All are backed by warranty. BRAND NEW RAPCO DRY AIR PUMPS are FAA-PMA approved and come with an inspection port to help determine replacement time. An exclusive internal shaft seal helps to keep out destructive oil and solvents. Mounting gasket included. Warranty period for 200 series is three year 1300 hours, 240 and 400 series is 1 year 500 hours, whichever comes first. No core charge on new pumps. Core rebate available.
Rapco New Dry Air Vacuum Pumps Rapco Part Our Part Number Number RAP215CC New Rapco Pump RAP215CC 10-23925 RAP215CC-9 New Rapco Pump RAP215CC-9 10-03401 RAP216CW New Rapco Pump RAP216CW 10-23935 RAP241CC New Rapco Pump RAP241CC 10-23950-1 RAP241CC-13 New Rapco Pump RAP241CC-13 10-03447 RAP241CC-15 New Rapco Pump RAP241CC-15 10-03448 RAP242CW New Rapco Pump RAP242CW 10-23960-1 RAP242CW-4 New Rapco Pump RAP242CW-4 10-03449 RAP242CW-10 New Rapco Pump RAP242CW-10 10-03450 RAP441CC New Rapco Pump RAP441CC 10-01126 RAP441CC-3 New Rapco Pump RAP441CC-3 10-03074 RAP441CC-7 New Rapco Pump RAP441CC-7 10-03075 RAP441CC-9 New Rapco Pump RAP441CC-9 10-03076 RAP441CC-17 New Rapco Pump RAP441CC-17 10-03077 RAP441CC-23 New Rapco Pump RAP441CC-23 10-03078 RAP442CW New Rapco Pump RAP442CW 10-01127 RAP442CW-4 New Rapco Pump RAP442CW-4 10-03079 RAP442CW-6 New Rapco Pump RAP442CW-6 10-03080 RAP442CW-8 New Rapco Pump RAP442CW-8 10-03081 RAP442CW-12 New Rapco Pump RAP442CW-12 10-01128 RAP442CW-14 New Rapco Pump RAP442CW-14 10-03082 RAP442CW-20 New Rapco Pump RAP442CW-20 10-03083 Description Price $289.00 $293.00 $289.00 $473.95 $473.95 $473.00 $474.00 $473.95 $473.95 $729.00 $719.00 $724.00 $719.00 $719.00 $721.00 $719.00 $719.00 $724.00 $719.00 $729.00 $724.00 $719.00
The Sigma-Tek 1U128-006 is a pump which carries a warranty for 2-years or 1000 hours. It uses an aluminum rotor and rotor housing, making the pump very resistant to damage from ingestion of foreign objects, excessive loads or engine oil. It provides clean, dry air for operation of air driven instruments in aircraft operating at medium altitudes. Pump rotates clockwise or counterclockwise in vacuum or pressure mode. May be mounted in either a vertical or horizontal position. FAA approved as a direct replacement for all instrument pumps but is not intended for supplying air to deicing boots. Mounting gasket furnished. Install suction regulator in line to instruments. Delivers 6 In. Hg vacuum (2.9-8.5 minimum CEM) or 6 In. Hg pressure (3.7-8.5 minimum CEM) from 1500 to 4000 RPM. No core charge. P/N 10-02778 ........ $539.00
The Sigma Tek 1U478-003 piston air pumps unique design features give virtually maintenance free operation with unprecedented long life and is backed by a full 5 year/2,000 hours warranty. Will replace 200 series and 1U128 series instrument vacuum pumps. Contains no brittle carbon rotor and vanes to shatter, making this pump highly resistant to damage from foreign objects or excessive loading. This pump operates either clockwise or counterclockwise engine pad rotation in the vacuum or pressure mode. Each port is clearly marked. May be mounted in any orientation. Mounting gasket furnished. Sigma Tek recommends using our high flow fittings, always use P/N 58B423-003 (90 degree long) and 58B423-004 (90 degree short) fittings where applicable. FAA-PMA approved. PN 10-01133 ..........$725.00
OVERHAULED DRY AIR PUMPS by RAPCO are FAA approved and shipped with FAA form 8130-3. Mounting gasket included. Warranty period for 200 series is two years 1000 hours, 240 and 400 series is one year 400 hours, whichever comes first.
Rapco Overhauled Dry Air Vacuum Pumps Rapco Part Our Part Number Number 211CC Overhauled Pump 211CC 10-23930 211CC-9 Overhauled Pump 211CC-9 10-23931 212CW Overhauled Pump 212CW 10-23940 215CC Overhauled Pump 215CC 10-03084 216CW Overhauled Pump 216CW 10-03085 241CC Overhauled Pump 241CC 10-23950 241CC-13 Overhauled Pump 241CC-13 10-03086 241CC-15 Overhauled Pump 241CC-15 10-03087 242CW Overhauled Pump 242CW 10-23960 242CW-4 Overhauled Pump 242CW-4 10-03088 242CW-10 Overhauled Pump 242CW-10 10-03089 441CC Overhauled Pump 441CC 10-02349 441CC-3 Overhauled Pump 441CC-3 10-03090 441CC-7 Overhauled Pump 441CC-7 10-03091 441CC-9 Overhauled Pump 441CC-9 10-03092 441CC-11 Overhauled Pump 441CC-11 10-03093 441CC-13 Overhauled Pump 441CC-13 10-03094 441CC-17 Overhauled Pump 441CC-17 10-03095 441CC-23 Overhauled Pump 441CC-23 10-03096 442CW Overhauled Pump 442CW 10-02350 442CW-4 Overhauled Pump 442CW-4 10-03097 442CW-6 Overhauled Pump 442CW-6 10-03098 442CW-8 Overhauled Pump 442CW-8 10-03099 442CW-10 Overhauled Pump 442CW-10 10-03101 442CW-12 Overhauled Pump 442CW-12 10-02351 442CW-14 Overhauled Pump 442CW-14 10-03102 442CW-16 Overhauled Pump 442CW-16 10-03103 442CW-18 Overhauled Pump 442CW-18 10-03104 442CW-20 Overhauled Pump 442CW-20 10-03105 Description Price $194.00 $194.00 $194.95 $198.50 $198.50 $382.95 $382.95 $382.95 $384.00 $382.95 $382.95 $498.00 $498.00 $494.50 $498.00 $498.00 $498.95 $498.00 $498.00 $498.00 $498.00 $498.00 $498.00 $498.00 $524.00 $498.00 $498.00 $500.95 $498.00
Arizona Aircraft Accessories is an FAA Approved overhaul facility which remanufactures run-out Airborne vacuum pumps to factory specifications. Warranty on 211/212 series pumps is 1-year/1000 hours and on 240/440 series pumps warranty is 1-year/400 hours. Weight: 211/212/240 series= 3 lbs.; 441/442 series = 4 lbs. 10-00068 ........................$197.95 10-00069 ........................$197.95 10-00070 ........................$292.95 10-00071 ........................$289.00 10-00072 ........................$357.00 10-00073 ........................$357.00
215cc pump ..................................P/N 216cw pump .................................P/N 241cc pump ..................................P/N 242cw pump .................................P/N 441cc pump ..................................P/N 442cw pump .................................P/N
Call for RMA before sending pump to Aircraft Spruce West for overhaul.
These kits are easy to install onto Airborne, Edo-Aire, & Sigma-Tek dry air pumps. Keeping the air pump cool can extend pump life and help prevent premature pump failure. Model RA20A, For 200/240 series pump. .......... P/N 10-23955 ... $49.85 Model RA40A, For 400 series pumps ................ P/N 10-23965 ... $57.85 Model RA30E, For EDO Aire/Sigma-tek pump .. P/N 10-23975 ... $48.00
These parts fit Airborne 200 & 400 series pumps.
Shear Coupling ..........................P/N 82-0067 ....... $14.00 ea Standard Bushing.......................P/N 82-20095 ..... $14.85 ea This tool efficiently places the retaining nuts on the vacuum pump mounting studs on Lycoming engines, saving time and frustration for the aircraft mechanic. Use this tool to start the nuts on the studs, and complete the operation using the Rapco wrench (10-13911). Made in the U.S.A. P/N 10-01052 ............ $30.50 FAA-PMA Approved ARB3-5-1 ................................... P/N 10-00922.............................. $2.95 AAD9-14-3 ................................. P/N 10-00923............................ $18.75 AAD9-14-5 ................................. P/N 10-00924............................ $18.95 AAD9-18-1 ................................. P/N 10-00937............................ $18.90 Case hardened steel, with nickel-chrome plating for corrosion resistance. Slip resistant vinyl grip. Rare earth magnet allows efficient and easy installation of hard-to-get-to install nuts. Eligibility: Fits all 200, 240, 400 and 3200 series vacuum pumps. .........P/N 10-02654 .......... $24.95
Add Core Charge to purchase price of Overhauled models. 200 Series $100.00, 400 Series $200.00 To receive core credit return repairable Rapco or Airborne aluminum cores to Aircraft Spruce West via UPS and reference invoice number.
The RA716 Pump Wrench provides superior access to the vacuum pump flange nuts. This new tool is made from quality hardened steel with corrosion resistant nickel plating. The shank is shaped to provide easy access to tight areas between the pump and accessories. The open end head is laser cut providing a close tolerance fit on the nut. Plastic coating on the handle provides a firm grip .P/N 10-13911 $22.75
446
FAA/PMA Approved 2H3-2 ...................... P/N 10-03458......... $379.95 2H3-6 ...................... P/N 10-03460......... $266.95 2H3-12 .................... P/N 10-03461......... $258.95 2H3-23 .................... P/N 10-03462......... $277.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN5829-2 manually adjustable needle valve complete with locking collar and mounting flange. For reducing vacuum to 2 Hg for operation of turn/bank. Manufactured by ACS Products Co...........................................P/N AN5829-2 .............. $23.65
RAPCO RA2H3-19 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. 5/8 Hose Fitting (Pump),Two 3/8 Hose Fittings (Instrument)Replaces Airborne PN.2H3-19, Piper PN. 492-240 P/N 10-04780 ..........$399.50
RAPCO RA2H3-23 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. 5/8 Hose Fitting (Pump), Two 3/8 Hose Fitting (instruments). Replaces - Airborne PN. 2H3-23, 133A4, Piper PN. 492-272 P/N 10-03009 ..........$194.00
RAPCO RA2H3-6 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. 5/8 Hose Fitting (Pump), 5/8 Hose Fitting (instruments). Replaces - Airborne PN. 2H3-6, 133B3, Aero Accessories PN. 2H3-6, Piper PN. 584-324 P/N 10-03918 ..........$194.95
RAPCO RA2H3-48 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. AN-8 Threaded Fitting, Thread OD 7/8 (Pump), 5/8 Hose Fitting (instrument) Replaces - Airborne PN. 2H3-48, Aero Accessories PN. AA2H3-48 P/N 10-03921 ..........$249.00
RAPCO RA2H3-11 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-51 garter filter. Two AN-8 Threaded Fittings (Thread OD 7/8). Replaces - Airborne PN. 2H311, 133A13 P/N 10-03919 ..........$594.00
RAPCO RA2H3-12 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. 5/8 Hose Fitting (Pump), Two 3/8 Hose Fitting (instruments). Replaces - Airborne PN. 2H3-12, 2H3-16, 133A16, Cessna PN. C482001-0401 P/N 10-00289 ...$189.95
RAPCO RA2H30-9 PRESSURE REGULATOR This FAA Approved Rapco pressure regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. 5/8 Hose Fitting (Pump), 5/8 Hose Fitting (instruments). Replaces - Airborne PN. 1H309, 2H30-9 P/N 10-03147 ..........$249.95
RAPCO RA2H3-15 VACUUM REGULATOR This FAA Approved Rapco vacuum regulator is designed to maintain a constant setting at various pressure altitudes. Adjustable setting. Vacuum regulators come with the RAB3-5-1 garter filter. One AN-8 Threaded Fitting (Thread OD 7/8). Replaces - Airborne PN. 2H3-15 P/N 10-04842 ..........$594.00 Aircraft Spruce offers RAPCO FAA-PMA approved filter replacements for Airborne assemblies. De struc tive con tami na tion abounds within an aircraft environment. Without proper filtration, system dirt and dust from the cabin as well as cigarette smoke will take its toll. This results in the replacement of expensive gyro instruments and other components. Your operating costs can be significantly reduced when filters are changed on a scheduled basis. RAPCO in-line and central filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. As a RAPCO distributor, Aircraft Spruce offers these replacement filters at exceptionally low prices.
Prices Subject to Change Without Notice
447
CM WP ME HA AP LG EP CS IN
Part No. 1J7-1
Increase gyro life with Airborne gyro air filter. Incorporates a 0.3 micron filter element that protects gyro instruments by filtering out tobacco smoke and cabin dust. Small, lightweight, easily installed. Fits most planes. Dual 3/8 beaded tubes simplify 2-gyro installations. Price $65.00
B3-5-1
Description Vacuum Instrument Central Gyro Air Filter: 0.3 micron pleated paper element with two 3/8 installation tubes. Vacuum relief & pump inlet foam garter filter: Foam Garter filter. Fits Airborne 133 & 2H3 Regulating Valves. Replacement element used in Airborne 1J2 Series Inlet filter (except 1J2-2) Replacement element used in Airborne 1J2-2. Replacement Filter for Airborne1J7-1 Gyro filter Assy. Line mounted Filter 3/8x3/8 non-beaded tube.53/4long.
$2.95
Case: Molded ABS Plastic. Weight: 1.4 oz. Part No. Range 10-01010 3-7 IN. HG. 10-02465 3-7 IN. HG. 10-02466 3-7 IN. HG. 10-02467 2-6 IN. HG. 10-02358 3-7 IN. HG. 10-02468 2-6 IN. HG. 10-02469 2-6 IN. HG. 10-02470 2-6 IN. HG. 10-02471 0-10 IN. HG. Dial Markings GA 4.5-5.2, RR 4.5 & 5.2 GA 4.75-5.25, RR 4.75 & 5.25 GA 4.5-5.0 GA 3.8-4.4, RR 3.8 & 4.4 B&W GA 4.0-5.0 GA 4.5-5.4, YA 2.0-4.5, RR 6.0 GA 3.5-5.0, RR3.5 B&W Price $152.95 $163.95 $163.95 $163.95 $157.95 $163.95 $163.95 $161.95 $161.95
Constructed of high temperature, high impact material, the CV1J4 transparent housing allows the aircraft mechanic, pilot or owner to visually monitor filter contamination when referenced with an internal Change Indicator decal. This revolutionary new design will aid in identifying malfunctioning or inoperative system components that cause premature air pump wear and avoid replacement of clean filters usually replaced annually or based on aircraft operating hours. When installed in a Vacuum gyro system between the air pump and gyro instruments, the CV1J4 Clear View air filter will prevent contamination of gyro instruments from carbon dust created by air pump failure. The CV1J4 filter is a direct replacement for Airborne 1J4-6 and 1J4-7 filters. FAA/PMA approved for Beechcraft Singles & Twins, Piper PA31, 31P, -300, -310, -325, -350, PA-31P-350, PA31T2, PA-34-200T, Grumman GA-7, Rockwell 700, standard equipment on all Mooney aircraft. P/N 10-00450 ........$67.50
Case: Molded ABS Plastic. Weight: 1.4 oz. Part No. 10-02364 10-02365 10-12305 10-02366 Range 0-25 PSI 0-25 PSI 0-25 PSI 0-25 PSI Dial Markings GA 5.0-10, YA 10-21 GA 15-21, YA 21-25, RR 14.9 GA 15-21, RR 24 GA 2.5-7.5, YA 7.5-21 Price $220.95 $220.95 $220.95 $220.95
EL AV TO PS BV
This FAA-PMA approved kit includes a CV1J4 clear view filter, necessary hardware, a copy of the STC and detailed instructions for smooth installations. An adhesive backed label is provided for recording kit installation data in aircraft log books. .........P/N 10-00451 ................. $99.75
Miniature 1 round case instrument. Used in many production aircraft. A real space saver. P/N 10-01100 ........................... $86.75 FOR EXPERIMENTAL AIRCRAFT ONLY. NOT FAA APPROVED
These units are designed to save space in cockpit panels. These gauges utilize an internal diaphragm for accuracy and reliability. Miniature 1-1/4 instrument. Case: Molded ABS Plastic. Weight: 1.4 oz. Part No. Range Dial Markings 10-01105 3-7 IN. HG. GA 4.25-6.25 10-02462 3-7 IN. HG. GA 4.25-5.2, RR 4.25 & 5.2 10-02463 3-7 IN. HG. GA 4.5-5.2, YA 3.8-4.5, RR 3.8 & 5.2 Price $162.95 $164.95 $164.95
Similar to kit for Cessnas above. FAA approved for most PA-28 and all PA-38. P/N 10-00452 .................... $99.75 Model Year A/C Serial No. 150K, L, M 1970-1977 15071129 to 15079405 A150K, L, M 1970-1977 A1500001 to A1500734 152 1978-1985 15279046 to 15286033 A152 1978-1985 A1520735 to A1521049 172 I, K, L, M, N, P, Q 1968-1985 17256513 to 17276516 R172K 1977-1961 R1722000 to R1723454 172RG 1980-1985 172RG0001 to 172RG1191 177, A, B 1968-1978 17700001 to 17702752 177RG 1971-1978 177RG0001 to 177RG1366 182R 1985-1986 18268435 to 18268615 T182 1981-1985 18267716 to 18268541 R182 1983-1986 R18201929 to R18202041 TR182 1983-1986 R18201929 to R18202041
These units are designed to save space in cockpit panels. These gauges utilize an internal diaphragm for accuracy and reliability. Case: Cast Aluminum. Weight: 4.7 oz. Part No. 10-02362 10-02363 Range 2-8 IN. HG. 2-8 IN. HG. Dial Markings B&W GA 4.5-5.5 Price $154.95 $162.95
448
AIRSPEED INDICATORS
These quality UMA, non-TSOd airspeed indicators are available in MPH, Knots or Dual Scales. Note: An inverter is required for the Internal Lighting Option (P/N 10-02083 UMA 14V LIGHT INVERTER) Description 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 Dual 3-1/8 Dua 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual 3-1/8 Dual Range Markings Dial 20-80 mph 20-100 mph 20-120 mph 20-140 mph 20-160 mph 40-180 mph 40-200 mph 40-240 mph 40-260 mph 40-280 mph 40-300 mph 20-80 mph Knots 20-100 mph Knots 20-120 mph Knots 20-140 mph Knots 20-160 mph Knots 40-180 mph Knots 40-200 mph Knots 40-240 mph Knots 40-260 mph Knots 40-280 mph Knots 40-300 mph Knots 20-140 mph/20-120 Knots 40-160 mph/20-135 Knots 40-180 mph/20-150 Knots 40-200 mph/40-170 Knots 40-240 mph/40-205 Knots 40-260 mph/40-225 Knots 40-300 mph/40-250 Knots 40-350 mph/40-300 Knots 40-260 Knots/50-300 mph 40-300 Knots/40-340 mph UMA Range Markings on NON-TSO Units Part No. 10-04905 10-04910 10-04915 10-04920 10-04925 10-04930 10-01029 10-00512 10-01030 10-01031 10-01032 10-01033 10-01034 10-04950 10-04955 10-01035 10-04965 10-04970 10-00514 10-01036 10-01037 10-01038 10-00511 10-02200 10-02300 10-02400 10-02600 10-01039 10-01040 10-01041 10-01042 10-01043 10-02792 Price $168.95 $168.95 $168.95 $181.95 $181.95 $168.95 $168.95 $168.95 $168.95 $168.95 $168.95 $168.95 $168.95 $168.95 $181.95 $181.95 $168.95 $168.95 $168.95 $168.95 $168.95 $168.95 $181.95 $181.95 $181.95 $181.95 $181.95 $181.95 $181.95 $181.95 $181.95 $181.95 $125.00
These 8000 series United airspeeds are TSOd for instalation on certificated aircraft. Factory new. Available in dual scale MPH/knots, or in MPH or knots only. Fits standard 3-1/8 panel hole. Wt: 0.7 lb. Not Lighted.
Range 40-200mph/40-170kts 0-250mph/40-200 kts 40-300mph/40-260 kts 0-260 knots 0-170 knots Part No. 10-00190 10-00191 10-00192 10-00201 10-00198 Price $603.00 $598.00 $602.00 $610.00 $603.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Available with custom range marks ...........P/N 10-02614 .........$145.00 Add -1 to P/Ns above for internally lighted airspeed indicators. For an additional $128.00 The true airspeed indicator corrects the indicated airspeed for changes in temperature and pressure encountered as aircraft changes altitude. By aligning outside temperature and pressure altitude with setting knob, movable airspeed scale is rotated proper amount so pointer registers true airspeed. Factory new 8100 series by United. TSOD for certificated aircraft. Dual scale. Not Lighted. Add $145.00 for custom range marks & specify exact range marks needed. Series 8100 8125 8100 8125 8130 8140 Range 0-200mph/170kt 0-250mph/215kt 40-170 Knots 0-200mph/170kt 0-260 Knots 60-350 Knots Part No. 10-00203 10-00204 10-00216 10-00217 10-00218 10-00219 Price $655.00 $655.00 $655.00 $655.00 $655.00 $699.00
These quality UMA airspeed indicators are available in MPH, Knots or Dual Scales.
3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 Single Scale P/N Price 40-160MPH TSOD 10-03250 $479.95 40-180MPH TSOD 10-03251 $478.00 40-200MPH TSOD 10-03252 $477.95 40-240MPH TSOD 10-03253 $480.95 40-260MPH TSOD 10-03254 $479.95 40-280MPH TSOD 10-03255 $479.95 40-300MPH TSOD 10-03256 $479.95 Single Scale P/N Price 40-160K Not TSOD 10-03257 $479.95 40-180K Not TSOD 10-03258 $477.95 40-200K Not TSOD 10-03259 $479.00 40-240K Not TSOD 10-03260 $478.95 40-260K Not TSOD 10-03261 $479.95 40-280K Not TSOD 10-03262 $479.95 40-300K Not TSOD 10-03263 $478.95 Dual Scale 3-1/8 160MPH TSOD 3-1/8 180MPH TSOD 3-1/8 200MPH TSOD 3-1/8 240MPH TSOD 3-1/8 260MPH TSOD P/N Price 10-03270 $479.95 10-03271 $480.95 10-03272 $478.95 10-03273 $477.95 10-03274 $479.95
UMA indicators are FAA TSOd to C2d specifications. Installable in a fixed wing aircraft with a reciprocating or Turboprop Engine. Must be installed in a temperature Dual Scale (MPH/Knots) controlled environment from -55 to +85 C, to a max alwith multicolor titude of 25,000 ft. UMA offers indicators with full scale markings ranges available, from 160 to 300 in MPH or Knots.
UMA Part NO. T16-210-121 T16-211-121 T16-210-141 T16-211-141 T16-210-142 T16-211-142 T16-210-160 T16-211-160 T16-210-161 T16-211-161 T16-210-180 T16-211-180 T16-210-200 T16-211-200 T16-210-240 T16-211-240 T16-210-260 T16-211-260 T16-210-300 T16-211-300 T16-210-400 T16-211-400 T16-212-240 T16-212-260 T16-212-280 T16-212-300 T16-212-320 T16-212-380 T16-212-400 T16-212-440 Range 20-120 MPH 20-120 Knots 20-140 MPH 20-140 Knots 30-140 MPH 30-140 Knots 40-160 MPH 40-160 Knots 20-160 MPH 20-160 Knots 40-180 MPH 40-180 Knots 40-200 MPH 40-200 Knots 40-240 MPH 40-240 Knots 40-260 MPH 40-260 Knots 40-300 MPH 40-300 Knots 40-400 MPH 40-400 Knots 40-240 KmH 40-260 KmH 40-280 KmH 40-300 KmH 40-320 KmH 40-380 KmH 40-400 KmH 40-440 KmH Part No. 10-03577 10-03578 10-03579 10-03580 10-03582 10-03583 10-03584 10-03585 10-03586 10-03587 10-03588 10-03589 10-03590 10-03591 10-03592 10-03593 10-03594 10-03595 10-03596 10-03597 10-03598 10-03599 10-03602 10-03603 10-03604 10-03605 10-03606 10-03607 10-03608 10-03609 Price $507.00 $506.00 $506.00 $502.00 $505.00 $506.00 $398.95 $506.00 $506.00 $506.00 $503.00 $510.00 $506.00 $498.95 $506.00 $506.00 $506.00 $506.00 $506.00 $506.00 $564.00 $564.00 $506.00 $506.00 $506.00 $506.00 $506.00 $506.00 $550.00 $564.00
Dual Scale P/N Price 3-1/8 205K Not TSOD 10-03276 $479.95 3-1/8 240K Not TSOD 10-03277 $479.95 3-1/8 260K Not TSOD 10-03278 $480.95 3-1/8 300K Not TSOD 10-03279 $480.95 3-1/8 300MPH TSOD 10-03275 $479.95
A fine quality instrument of new manufacture for the exceptional homebuilt aircraft. Matte-white dial markings. Fits standard 2-1/4 instrument panel opening. Space saving dims: 2-3/8x2-3/8x3.25L. All ranges available in knots. Range P/N 20-100 MPH 10-03992 20-120 MPH 10-03993 20-140 MPH 10-03994 0-120 Knot 10-03995 40-180 Knot 10-00508 Range P/N Range P/N 40-160 MPH 10-03996 40-240 MPH 10-04000 40-180 MPH 10-03997 40-260 MPH 10-04001 40-200 MPH 10-03998 40-300 MPH 10-04002 40-140 Knot 10-00507 40-160 Knot 10-01787 40-200 Knot 10-00509 40-240 Knot 10-00510 ALL MODELS...............................$195.95
449
AIRSPEED INDICATORS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Falcon Gauge Airspeed Indicators have been one of the most chose flight instruments by kit plane builders and pilots. There are many great advantages to using these gauges: excellent slow speed characteristics; very progressive increments; a variety of ranges, light weight; short length, and affordable price. All Falcon Gauge Airspeed Indicators are housed in an aluminum case and consist of all metal parts. Available ranges: mph, knots, km/hr; single range reading or dual range readings. Non-Tsod. Model No. ASI200M-3 ASI180M-3 ASI080M-3 ASI100M-3 ASI120M-3 ASI140M-3 ASI150M-3 ASI160M-3 ASI080N-3 ASI100N-3 ASI120N-3 ASI140N-3 ASI160N-3 ASI180N-3 ASI200N-3 ASI220N-3 ASI120K-3 ASI150K-3 ASI200K-3 ASI300K-3 Length 3.5/97.3mm 3.5/97.3mm 2.2/56.5mm 2.2/56.5mm 2.2/56.5mm 3.5/97.3mm 2.2/56.5mm 3.5/97.3mm 3.5/97.3mm 2.2/56.5mm 2.2/56.5mm 3.5/97.3mm 3.5/97.3mm 3.5/97.3mm 3.5/97.3mm 3.5/97.3mm 2.2/56.5mm 2.2/56.5mm 2.2/56.5mm 2.2/56.5mm Range 30-200 MPH 30-180 MPH 0-80 MPH 0-100 MPH 0-120 MPH 0-140 MPH 0-150 MPH 0-160 MPH 0-80 Knots 0-100 Knots 0-120 Knots 0-140 Knots 0-160 Knots 0-180 Knots 0-200 Knots 0-220 Knots 0-120 KPH 0-150 KPH 0-200 KPH 0-300 KPH Part No. 10-02918 10-03000 10-02905 10-02910 10-02915 10-02916 10-02225 10-02917 10-02896 10-02897 10-02898 10-02899 10-02900 10-02217 10-02218 10-02219 10-02625 10-02221 10-02222 10-02223 Price $167.95 $136.95 $134.95 $167.95 $163.95 $167.95 $167.95 $167.95 $168.95 $167.95 $167.95 $167.95 $167.95 $167.95 $167.95 $167.95 $163.95 $167.95 $167.95 $167.95
Falcon Gauge True Airspeed Indicators have a sub-dial and window. The pilot can set the dial to coincide the outside temperature with the flight altitude for immediate and accurate true airspeed reference. It is a high precision airspeed indicator which makes for a nice feature and impression in an experimental aircraft cockpit. It also features all parts made with metal, aluminum case housing, short length and light weight. Non-Tsod Dual Range: mph inside/knots outside or knots inside/mph outside Single Range: mph or knots Size: 3-1/8 Length: 2.2 or 56.5mm Weight: 10.5 oz. or 301g Model No. ASIT260M-3 ASIT260M-3L ASIT210N-3 ASIT210N-3L ASIT2210N-3 ASIT220N-3L ASIT240M-3 ASIT240M-3L ASIT241MN-3 ASIT241MN-3L ASIT262MN-3 ASI262MN-3L ASIT214NM-3 ASIT214NM-3L ASIT226NM-3 ASIT226NM-3L Range 40-260 MPH 40-260 MPH, Lighted 40-210 Knots 40-210 Knots, Lighted 40-220 Knots 40-220 Knots, Lighted 40-240 MPH 40-240 MPH, Lighted 40-240 MPH/210 Knots 40-240 MPH/210 Knots, Lighted 40-260 MPH /220Knots 40-260 MPH/220 Knots, Lighted 40-210 Knots/240 MPH 40-210 Knots/240 MPH, Lighted 40-200 Knots/260 MPH 40-200 Knots/260 MPH, Lighted Part No. 10-02235 10-02236 10-02237 10-02238 10-02240 10-02239 10-02248 10-02249 10-00001 10-02214 10-00004 10-02234 10-00002 10-02233 10-00003 10-02216 Price $225.95 $341.95 $225.95 $377.95 $281.95 $342.95 $225.95 $340.95 $274.95 $310.95 $225.95 $377.95 $225.95 $342.95 $225.95 $310.95
Falcon Gauge Airspeed Indicators have been one of the most chose flight instruments by kit plane builders and pilots. There are many great advantages to using these gauges: excellent slow speed characteristics; very progressive increments; a variety of ranges, light weight; short length, and affordable price. All Falcon Gauge Airspeed Indicators are housed in an aluminum case and consist of all metal parts. Falcon Gauge Dual Dial Airspeed Indicators provide dual readings and are suitable for higher performance type aircraft flying at moderate to high speeds. Matte-white dial markings, housed in a sturdy protective aluminum case. Weight: approx. 10.5 oz./301g Length:2.2 or 56.5mm Size: 3-1/8 Model No. ASI164MN-3 ASI186MN-3 ASI208MN-3 ASI252MN-3 ASI306MN-3 ASI316KN-3 Range 20-160 MPH/140 Knots 30-180 MPH/160 Knots 30-200 MPH/180 Knots 30-250 MPH/220 Knots 40-300 MPH/260 Knots 30-300 KPH/160 Knots Part No. 10-02227 10-02228 10-02901 10-02229 10-02230 10-02231 Price $135.95 $164.95 $166.95 $167.95 $166.95 $166.95
Falcon Gauge Miniature Airspeed Indicators are designed for ultralights. They offer ultralight pilots an affordable alternative to other higher priced indicators found in the market today without compromising the pilots needs for a quality gauge that provides accuracy, light weight, compactness and safety. Their excellent slow speed performance provides an extra measure of safety by assuring accurate speed readings when flying low or critical stall speeds. Weight: approx. 2.8 oz. or 80g Length: 2-9/16 or 41mm Part No. 10-02605 10-02610 10-02615 10-02620 10-04198 10-02226 10-04069 Price $149.95 $149.95 $149.95 $145.95 $145.95 $149.95 $149.95
Range 0-80 MPH 0-100 MPH 0-120 MPH 0-140 MPH 0-120 KPH 0-140 KPH 0-120 KNOTS
The Kit Cole Clarifier Removable The Kit Cole Clarifier is a non FAA approved coated, high quality glass lens provided in a kit that allows you to temporarily attach it to your altimeter face for all of your VFR & LSA flying needs. The kit comes complete with a non-permanent, clear bonding gel and instructions for installation. This product is sold as a removable visual aid and is not intended for IFR use on TSOd altimeters. The Kit Cole Clarifier is not sold to be permanently bonded to your altimeter face by any non FAA approved techniques. The FAA Approved Kit Cole Clarifier The Kit Cole Clarifier (US Patent No 7,313,962, 7,404,322) is a FAA approved coated, high quality glass lens provided in a kit that is attached to your altimeter face for all of your VFR & LSA flying needs. This product is sold as a visual aid and is intended for IFR use on TSOd altimeters. Special order only must send in altimeter to have bonded. Kit Cole Clarifier Removeable .....................P/N 10-02838 ...........$64.75 Kit Cole Clarifier - FAA Approved ................P/N 11-07785 .........$189.95
Sigma-Teks precision airspeeds are original equipment on a variety of aircraft and over 144,000 have been delivered worldwide. Select from a single MPH scale or dual scale showing MPH / Knots. New manufacture. TSOD for certificated aircraft unlit. Add $95 for custom range markings. (Specify exactly)
Description SigmaTek Airspeed 40-200MPH SigmaTek D/S Airspeed 40-200MP SigmaTek Airspeed 40-250MPH SigmaTek D/S Airspeed 40-250MP SigmaTek Airspeed 40-300MPH SigmaTek D/S Airspeed 40-300MP
450
P/N 10-03897
0-100 MPH Pitot 10-02925 $259.95 0-120 MPH Pitot 10-02930 $306.95 0-160 MPH Pitot 10-02935 $364.00 0-75 MPH Venturi 10-02940 $272.95 0-75 MPH Pitot 10-02945 $269.95 0-100 MPH Pitot 10-02950 $290.95 0-120 MPH Pitot 10-02955 $386.95 0-160 MPH Pitot 10-02960 $398.00 0-200 MPH Pitot 10-02965 $369.95 0-200 MPH Venturi 10-03897 $312.95
The mini altimeter is a remarkable instrument. Through the use of an accurate single pointer design, the 0-5,000 and 0-10,000 altimeters are able to squeeze precision and reliability into a 2-1/4 instrument which is less than 2 deep. All altimeters are designed with Kollsman windows, glass faces, precision jewelled movements and a rugged combination metal and plastic case. Static porting is standard. 0-5000 ft. Altimeter, Inches ................ P/N 10-24100 ......... $373.95 0-5000 ft. Altimeter, Millibar ............... P/N 10-24105 ......... $449.50 0-10000 ft. Altimeter, Inches .............. P/N 10-24115 ......... $365.95 0-10000 ft. Altimeter, Millibar ............. P/N 10-24125 ......... $330.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Customizable range markings can be added to match aircraft operating handbook. Affordable, certified 2-inch instrument which can be used as standby or primary indicator. Combine with a Mid-Continent MD15 Altimeter and 4200 Attitude Indicator for a complete standby package designed for tight panel applications. Approved to FAA TSO-C2d. Integral long life 5, 14 or 28 volt LED lighting. Anti-reflective glass enhances visibility and reduces pilot fatigue. Rear-mounted in standard 2 1/4 cutouts horizontally, vertically or individually. Designed and built in the USA. One year limited warranty.
Model MD25-160 MD25-200 MD25-260 MD25-300 MD25-350 MD25-400 2-Inch 2-Inch 2-Inch 2-Inch 2-Inch 2-Inch Description 20-160 knots, 40-200 knots, 40-260 knots, 40-300 knots, 40-350 knots, 40-400 knots, Lighted Lighted Lighted Lighted Lighted Lighted Part No. 10-04761 10-04763 10-04764 10-04765 10-04766 10-04767 Price $1,420.00 $1,420.00 $1,420.00 $1,420.00 $1,420.00 $1,420.00
Through the use of an accurate single pointer design, the 0-10,000 altimeter is able to squeeze precision and reliability into a 3-1/8 instrument which is less than 2,2 deep. Designed with a Kollsman window, glass face, precision jewelled movements and a rugged combination metal and plastic case. Static porting is standard. Weight: 230g P/N 10-03831 ......... $259.00 The Series 2000 Digital Altimeter is a precision instrument providing altitude readings from -100 to +30700 feet in 10 steps. A standard 3-1/8 instrument powered from 1135V DC & uses a highly visible backlighted liquid crystal display. Displayed data includes Altitude, Baro Ref & Vertical Speed. A programmable altitude alert function combines both audio and visual (LED) outputs. An oxygen alert cautions when over 12500 feet. All data is output in computer compatible RS-232 format. Model 2000 devices display pressure in Hg while Model 2001 units are in mBar. 2 options can be added to the basic (-1) model; OAT (-2) includes temperature sender and also computes and displays Density Altitude, Mode C (-4) is a standard TSO-C88a compatible encoder. Both options are included in the (-3) versions. Wt., 8 oz. Depth behind back of instrument panel, 3-7/8. 2-yr factory warranty. Model 2000-1 2000-2 2000-3 2000-4 P/N 10-24040 10-24050 10-24060 10-24070 Price $399.50 $498.95 $597.00 $498.95 Model 2001-1 2001-2 2001-3 2001-4 P/N 10-24041 10-24051 10-24061 10-24071 Price $405.95 $499.95 $597.00 $498.95
Designed for hang gliders but can be mounted on low speed aircraft as an airspeed indicator. Easy to read. Mounting bracket clamps to 7/8 or 1 1/8 dia. tube. Short bracket is 3 long, Long bracket 15 long. Wind Meter (0-55 mph) .......P/N 10-04100 ...........$18.85 Wind Meter (0-80 mph) .......P/N 10-04105 ...........$18.85 Short Bracket ......................P/N 10-04200 .............$5.75 Long Bracket .......................P/N 10-04300 .............$6.75
HALL WINDMETER
Air speed 60 MPH kit, 2 round, with 303GW sender with 510A-1 propeller & 323B mount & 205-SS-SS 5 cable and 692B-323 bullet case with 323B mount, 2GM60R P/N 10-01295 .........$177.95
Yellow, red, green and white, pressure sensitive. Just pull off backing and place on instrument lens. P/N 10-03905 ...... $2.95/set
Unlike mechanical altimeters, the Taskem 5000 is insensitive to the high vibration of 2-stroke engines frequently used on ultralight aircraft. This has literally shaken many mechanical altimeters. The 5000 is all solid state and can withstand severe shock and vibration without damage. It has a full 4.5 digit liquid crystal (LCD) display with large, 1/2 high characters. Because the LCD uses direct drive, it is easily readable from most viewing angles and does not disappear when viewed from an angle or does not washout in bright sunlight. Includes a backlight for night or dusk viewing. The altitude range extends from below sea level to well above the need for supplementary oxygen. The limits are -1000 to 19,990 ft. (-305 to 6,093 meters). Increments are in 10 ft./1m steps. The instrument is powered from DC in the range of 730V and is protected for accidental polarity reversal. A 9V battery is a common power source and a battery holder for this is provided on the back, external to the case. An alkaline battery will provide over 40 hours of operation, without the backlight illuminated. The backlight is not powered in the ON power switch position to conserve battery life. Feet ........P/N 10-24010 ........ $265.95 Meters ....P/N 10-24020 ........ $265.95 Designed for general aviation use, the Altilert is a portable device to help the pilot maintain an assigned or desired altitude. Its use is simple. Fly to your desired altitude and turn the unit on. The Altilert learns your current altitude (by sampling barometric pressure, just like your altimeter) and stores this information. As your altitude drifts, an error signal is generated. At approximately +/- 100 ft. (or 50 ft. in Precision Mode), the red indicator flashes quickly and is accompanied by a piezo horn. The horn can be silenced by pressing the push button switch. Alarms will clear upon return to your original altitude. A new desired altitude can be set by turning the unit off and back on at any time. SPECIFICATIONS: Size: 1.5h x 4L Wt: 5 oz. (including battery) Battery: 9V (not included) Battery Life: 24 hrs+ Dual Sensitivity Levels Audible Alarm. P/N 10-01727 ......................... $149.00
The Vector combines an altimeter, vertical speed indicator, barometer, compass and a precision timepiece in one compact wristwatch-sized case. The instrument allows altitude measurement in feet or meters, up to a max. 27,000 ft., accurate to plus or minus 10 ft. It also provides instantaneous vertical ascent & descent rates in either feet/second or meters/ second. The backlit display is easy to see in all lighting conditions. The barometer displays current barometric pressure and trends for accuracy, and deviation adjustment to correct for differences between true and magnetic north. Reliable & accurate, this new instrument provides time, day and date, as well as three daily alarms, a stopwatch and countdown timer. The unit is also waterproof to 100 ft.P/N 10-19325 ......... $199.00
451
ALTIMETERS
CM WP
Range 0-20000 ft.
Designed to help the pilot determine altitudeby measuring existing atmospheric pressure, this altimeter translates this measurement into heightabove-sea-level. This is indicated on the dial of the instrument in feet, which requires setting the barometric pressure in the Kollsman window. Standard 3-1/8 size.
Scale Inches Inches Millibar Inches Inches Millibar In/Mil In/Mil In/Mil In/Mil Millibar Millibar Manufacturer United (TSO) United (TSO) United (TSO) United (Lighted) United (Lighted) United (Lighted) United (Lighted) United (Unlighted) United (Unlighted) United (Lighted) United (Lighted) United (Unlighted) P/N 10-04550 10-04570 10-04560 10-00929 10-00930 10-00931 10-00932 10-00933 10-02696 10-02697 10-02698 10-02699 Price Ea. $987.00 $1,069.00 $947.00 $1,070.00 $1,182.00 $1,329.00 $1,086.00 $981.00 $1,075.00 $1,200.00 $1,452.00 $1,085.00
This UMA standard altimeter utilizes a single pointer and is designed to meet the needs of the low-cost Non-IFR user. This altimeter utilizes a single pointer and adjustable barometric scale, viewed through a Kollsman Window. Can be ordered in inches of mercury or milibar. Available in feet or meters. Aluminum case. $161.95 ea Part No. 10-22965 10-02436 10-02369 10-05120 10-05125 10-05126 10-05127 Range 0-20,000 Ft. 0-10,000 Ft. 0-5,500 Ft. 0-5,500 Ft. 0-10,000 Ft. 0-20,000 Ft. 0-3,000 M Dial Markings B &W B &W B &W B &W B &W B &W B &W Scale w/ IN HG w/ IN HG w/ IN HG w/ Milibar w/ Milibar w/ Milibar w/ Milibar
ME HA AP LG EP CS IN EL AV TO PS BV
0-35000 ft. 0-20000 ft. 0-20000 ft. 0-35000 ft. 0-20000 ft. 0-20000 ft. 0-20000 ft. 0-35000 ft. 0-35000 ft. 0-35000 ft. 0-35000 ft.
True airspeed all the time! No need to correct the barometer, the altimeter does it automatically for the pilot. Compatible with most Air Data Systems 35,000 ft., dual barometric scale Internally lighted light tray included TSO C10d certified Standard D.C. voltage barometric output Mounts in standard 3 1/8 panel cutout Requires just 5 depth behind the panel 1/8 NPT static port Connector included Manufactured by United Instruments. P/N 10-02718......... $2,495.00
This UMA standard altimeter utilizes a single pointer and is designed to meet the needs of the low-cost Non-IFR user. This altimeter utilizes a single pointer and adjustable barometric scale, viewed through a Kollsman Window. Can be ordered in inches of mercury or milibar. Scale is available in feet or meters. $308.95 ea Range Dial Markings Scale 0-10,000 Ft. B &W w/ IN HG 0-20,000 Ft. B &W w/ IN HG 0-10,000 Ft. B &W w/ Milibar 0-20,000 Ft. B &W w/ Milibar
Reliable for primary or standby use, these altimeters provide flight critical data with a three-pointer or counter drum pointer display. The compact, 2-inch size is ideal for complex panel installations. Lighting is included. These altimeters are used in many popular OEM and STC packages. Call for application assistance.
Model MD15-211 Description Part No. Price
Falcon Gauge light weight altimeters feature a nonsensitive altimeter on a 3-1/8, single pointer, and a barometric window. A setting knob allows the pilot to set the barometric reading to the correct field elevation or barometric pressure setting. They are weight conservative, economical, yet very precision and accurate instruments that provide excellent altitude measuring capabilities; designed for ultra-light airplanes. 3-1/8 is non-sensitive. Standard Types are either feet reading with barometric window inches of mercury or millibars reading; or meters reading with barometric window millibars reading. Length: 2 3/8 Weight: 10.7 oz. Part No. Range Price 10-05100 6,000 ft./12,000 ft Inches $158.50 10-03422 10,000 ft./20,000 ft. Inches $156.95 10-02251 6,000 ft., Millibars $154.50 10-02252 10,000 ft., Millibars $165.95 2-1/4 is sensitive. Single Pointer, and a barometric window. A setting knob allows the pilot to set the barometric reading to the correct field elevation or barometric pressure setting. They are weight conservative, economical, yet very precision and accurate instruments. It is suitable where space and weight is a consideration. This type is available in Feet or Meter reading, the baro-metric window can be either in inches of mercury or in millibars reading. Length: 2 3/8 Weight: 3.6 oz. Model No. Part No. Range Price ALTN6INF-2 10-02205 5,500 ft, Inches $194.50 ALTN10INF-2 10-04510 10,000 ft, Inches $194.95 ALTN6MBF-2 10-04070 6,000 ft., Millibars $202.95 ALTN10MBF-2 10-04071 10,000 ft., Millibars $196.95 ALTN3ME-2 10-02207 3,000 Meters, Millibars $198.00 ALTN6ME-2 10-02254 6,000 Meters, Millibars $198.00
Size Model No. Range Part No. Price
2-Inch 20K, 3-ptr., Right-hand knob, Mil., 10-04753 $3,812.00 lighted MD15-212 2-Inch 20K, 3-ptr., Left-hand knob, Mil., lighted 10-04754 $3,812.00 2-Inch 20K, 3-ptr., Right-hand knob, In., MD15-221 10-04755 $3,812.00 lighted 2-Inch 20K, 3-ptr., Left-hand knob, inches, 10-04756 $3,812.00 MD15-222 lighted 2-Inch 35K, 3-ptr., Right-hand knob, Mil., 10-04757 $3,987.00 MD15-311 lighted
MD15-312 2-Inch 35K, 3-ptr., Left-hand knob, Mil., lighted 10-04758 $3,987.00
2-Inch 35K, 3-ptr., Right-hand knob, In., 10-04759 $3,987.00 lighted MD15-322 2-Inch 35K, 3-ptr., Left-hand knob, In., lighted 10-04760 $3,987.00
MD15-321
1. Three Pointer Altimeter with Barometric Window and Low Altitude Warning Stripes is a modern type. The easy to read striped sector will show while flying below 16,000 ft. 2. Three Pointer Altimeter with a Barometric Window enables the pilot to adjust the altimeter to the barometric conditions existing at the point of landing. 3. Two Pointer Altimeter without Barometric Window. This type of altimeter is designed to meet the demands of some pilots who either live or fly the areas barometric pressure beyond 28.1 to 31 inches of mercury, or 950 to 1050 millibars, or some pilots prefer to set the altimeter to0 altitude before taking off without regard to the barometric pressure. By installing this altimeter, the pilot can fly anywhere in the world without having to care about the barometric pressure changes. Non-TSOd.
452
Precision die-cut black anodized aluminum masks simplify installation of small instruments in large instrument panel cut-outs. 3 types available. #1: Large AN-type artificial horizon cut-out to 3-1/8 size P/N 10-05900 .............. $11.40 #2: Large AN-type directional gyro cut-out to 3-1/8 size. P/N 10-06000 .............. $13.75 #3: 3-1/8 size cut-out to 2-1/4 size ..... P/N 10-06100 .............. $10.95
REDUCING MASKS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A handy much needed tool to have for those difficult to make 3 ATI cut outs that everyone complains about. A rugged tool made of alloy steel with a 5860 RC hardness for long life. Simply drill mounting holes and cut opening file to template. P/N 10-00153 ...............$32.50
DRILL JIG AND FILING TEMPLATE FOR THE 3 ATI INSTRUMENT CUT
ALTIMETER BUG
Quick fix for a hard to cut out opening. Plate is .500 wider than instrument. For easy mounting, material is .080 aluminum P/N 10-00154 .............. $10.50 Reduce from 2.25 to 2 diameter instrument. For oil pressure, ammeter gauge etc. P/N 10-00155 .................$8.50
REDUCING PLATE FROM 2-1/4 DIA. INSTRUMENT COVERS FOR PARTIAL PANEL PRACTICE
INSTRUMENT BUGS
Sold in 4 packs of 25 (for a total of 100 sticky notes). These round pads are white with a light blue ASA logo, and fit any aviation instrument. Perfect for partial panel practice or jotting down quick notes. P/N 13-21776 ................ $6.25 This angled instrument mount allows replacement of a 3-1/8 gauge with a 2-1/4 gauge. It places the gauge at a 20 angle toward the pilot for easier reading and reduced glare. Made from 20% glass fiber filled Lexan. P/N 10-06800 .......... $19.95 ea
INSTRUMENT COVERS
These white stick on instrument size covers are ideal for partial panel practice or to cover an actual failed instrument. These covers are reusable and are furnished in a package of 5 covers P/N 10-00066 .............$3.50
Partial Panel Instrument Cover: Hard plastic instrument cover with single mini suction cup attached. Easy to remove and easy to use. 2 3/4. P/N 17-00222...............$2.95 Designed with static cling polyester, the IIA will stick to your glass instrument face without licking and will stay there until you want to remove it. Practicing instrument failures during flight is a requirement by the Federal Aviation Administration for your practical test. One package includes four Inoperative Instrument Aids. Developed by a Certified Instrument Flight Instructor with the intent to improve instrument instruction. measures 3 in diameter. P/N 13-04173 ............................. $8.95
Cover ups for PFD and MFD screens for glass cockpit training. For partial panel practice & actual instrument failures. * Reusable, 3 per pack * Cling type plastic covers, with lift tab * Zip lock plastic bag for convenient storage. P/N 13-06116 ................ $6.95
3ATI Reducers to 3 1/8" - Use a 3ATI hole cut out to mount 3 1/8'' diameter instrument. Plate can be shimed to instrument panel thickness . Simple installation. Heat-treated aluminum .080 thick with black anodize finish. P/N 07-01331 .................$16.75 3ATI Reducers to 2 1/4" - Use a 3ATI hole cut out to mount 2 1/4' diameter instruments. Plate can be shimed to instrument panel thickness, comes with 4 rivets. Simple installation. Heat-treated aluminum .080 thick with black anodize finish.BACK PLATE 3.8 X 3.8 P/N 07-01330 .................$16.75
Use these plates to attractively cover unused panel cutouts. Aluminum and plastic plates have raised center, which brings the plug face about even with the front surface of the panel. Plastic plate for 2-1/4 Cut-Out............................ P/N 10-06900 ... $3.95 Plastic plate for 3-1/8 Cut-Out............................ P/N 10-07000 ... $6.95 Plastic plate for standard altimeter hole .............. P/N 10-07100 ... $8.85 Aluminum plate for 2-1/4hole, black wrinkle ...... P/N 10-00427 ... $9.75 Aluminum plate for 2-1/4hole, no paint .............. P/N 10-00428 ... $9.75 Aluminum plate for 3-1/8hole, black wrinkle ...... P/N 10-00429 . $11.50 Aluminum plate for 3-1/8hole, no paint .............. P/N 10-00430 . $10.75 Plastic plate for 3ATI hole, black fire retardant ... P/N 10-00433 ... $8.50 Aluminum plate for 3ATI hole, black wrinkle ....... P/N 10-00434 . $11.50 Aluminum plate for 3ATI hole, no paint ............... P/N 10-00436 . $10.50 Plastic plate for half ATI hole, black fire resist. ... P/N 10-00437 ... $6.95
Use this template for precise positioning of instrument holes and mounting screw holes in panel. For both 2-1/4 & 3-1/8 dia. instruments. With transfer punch for marking screw hole centers and instructions. P/N 12-14600 ........................... $17.95
453
VSI - ACCELEROMETERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Accelerometers register to g forces acting on the airframe during turbulence or aerobatic maneuvers. One pointer gives a continuous reading, the other two indicate maximum positive and negative loads. Easy to reset by pushing the push to reset knob. All models are mechanical and offer precision, accuracy, reliability and durability. They are very easy to operate with no wiring necessary. Whether flying acrobatic or not, this G-Meter provides the pilot valuable information for a winged airplane and helicopter without having to spend astonishing figures. Size 3-1/8 3-1/8 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 Part No. 10-00936 10-00935 10-09800 10-04072 10-04073 10-02049 10-04074 10-00840 Range -5g to +10g -2g to +5g -5g to +10g - white pointers -5g to +10g - orange pointers -5g to +10g, Lighting 24V -5g to +10g, Lighting 12V -5g to +10g, Lighting 5V -2g to +5g Price $389.95 $419.00 $396.00 $458.95 $727.00 $595.00 $718.00 $399.00
The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. This instrument is temperature compensated and is provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system.
Manufactured by United Instruments. Used in most production aircraft. Size: 3-1/8 x 3-1/8 x 4, Wt. 0.7 lb. TSO-C8b. Unlighted VSIs 0-2000 FPM .............................. P/N 10-05200 ......................... $498.00 0-3000 FPM .............................. P/N 10-20400 ......................... $498.00 0-4000 FPM .............................. P/N 10-20500 ......................... $499.00 0-6000 FPM .............................. P/N 10-05250 ......................... $898.00 Lighted VSIs 0-2000 FPM .............................. P/N 10-00925 ......................... $616.00 0-3000 FPM .............................. P/N 10-00926 ......................... $616.00 0-4000 FPM .............................. P/N 10-00927 ......................... $616.00 0-6000 FPM .............................. P/N 10-00928 ...................... $1,018.00
This instrument, mounted in the aircraft panel with its face in the vertical plane, register to g forces acting on the airframe during turbulence, or aerobatic maneuvers. One pointer gives a continuous reading, the other two indicate maximum positive and negative loads. A reset knob is provided. The mechanism is locked for shipping. Interchangeable with MS282025-1. Specifications: Dim: 2-1/4 X 2-1/4 X 4 Weight: Approx. 7lbs Range: -5g to +10g. P/N 10-09800 ..........................$396.00
This reconditioned instrument, mounted in the aircraft panel with its face in the vertical plane, register to g forces acting on the airframe during turbulence, or aerobatic maneuvers. One pointer gives a continuous reading, the other two indicate maximum positive and negative loads. A reset knob is provided. The mechanism is locked for shipping. Interchangeable with AN5745. Specifications: Dim: 3-1/8 X 3-1/8 X 3 Weight: Approx. 8lbs Range: -5g to +12g. P/N 10-09710 ..........................$359.95
This instrument mounts in a standard 2-1/4 instrument panel cutout. New manufacture with brilliant easy-to-read matte-white numerals on black background. Size: 23/8x 23/8x 31/4 long. Part No. 10-05500 10-00079 10-05550 10-05560 10-05570 10-05580 10-05600 10-05610 10-06910 11-07239 Name Vertical Speed Vertical Speed Vertical Speed Climb Rate of Change Cabin Climb Vertical Speed Climb Rate of Change Range 0-2,000 Ft. 0-3,000 Ft. 0-4,000 Ft. 0-4,000 Ft. 0-4,000 Ft. 0-4,000 Ft. 0-6,000 Ft. 0-6,000 Ft. 0-6,000 Ft. Price $266.50 $270.95 $296.95 $315.95 $315.95 $315.95 $296.95 $315.95 $315.95 $49.95
The GT-50 is a Six Function: Accelerometer - Clock Voltmeter - Temperature for Experimental Aircraft. G-Meter: * Continuous Instantaneous Display to +12/-10 Gs * Records and Saves Max and Min Gs * 30 Degree (Sonex) Tilted Panel Compatible Flight Timer: Automatically Records Flight Time Clock: 12 or 24 Hour Format Timer/Stopwatch Voltmeter
Features: * Best G-Meter Value Available * Extreme Operating Temperature Display * Soft Orange Backlight * 2-1/4 Panel Mounted * Weighs 2.5oz * Includes Pre-Wired Connector * 12-28 Volt Compatible ......................... P/N 10-03691........ $159.00 Flight Data OAT Probe GT50 ...................... P/N 10-03694.......... $29.00
These extremely sensitive Winter instruments provide instantaneous indication of changes in vertical speed. Mechanical operation, with vario flask included. 2 1/4" and 3 1/8" sizes, 1000 fpm, and 1500 fpm ranges
WINTER VARIOMETERS
Falcon Gauge Vertical Speed Indicators (Rate of Climb), have been installed in thousands of planes. Available in climb ranges from 2,000 feet per minute to 3,000 feet per minute, and 10 meters per second. This precision aircraft instrument provides immediate climb and descent information with an easy to read dial and is extremely reliable and durable. Over several decades, they have been servicing and satisfying pilots and kit plane builders worldwide. The 2-1/4 altimeter is perfect for the ultra-light models and where space and weight are a factor of consideration. Part No. Size Range 2,000 ft/min 3,000 ft. / Min. Length Weight Price
10-05205 3 1/8 Description 2-1/4" 1000 FPM 2-1/4" 1500 FPM 3-1/8" 1000 FPM 3-1/8" 1500FPM Part No. 10-03813 10-03819 10-03830 10-03839 Price $559.00 $685.00 $698.00 $583.00 10-05210 3 1/8
10-02246 3 1/8 10 meter/second 4.25/105mm 12.7 oz $154.50 10-01643 2 1/4 10-00983 2 1/4 2,000 ft. / Min. 10 Meters / Sec. 4.8/112mm 4.8/112mm 9.2 oz $228.95 9.2 oz $237.95
454
CM WP
Kits come with special self-locking black pan head screws nylon washers, and alignment guide pin. Precision machined Nut Ring instrument mounting kit. Designed to slide on from the back side of the instrument using the alignment guide pin inserted through a screw hole. Pulling on the alignment pin from the front side of the panel allows you to hold the instrument in correct alignment in the panel. Specially designed self-locking pan head black brass mounting screws and nylon washers are then easily installed from the front. Countersunk self-locking black brass screws are also available. Extra screws & washers are sold in packs of 12. The nylon washer keeps from chipping the instrument panel. All self-locking screws are extra long to accommodate the extra thickness of light wedges and internally lighted instruments. Nut Rings can be installed without removing hoses, tubing, or electrical connections. Designed to replace grasshopper nuts. PMAd. Alignment guide pin sold separately.(P/N 10-03696) Model MK-01 MK-02 MK-03 MKNR-05 MKNR-06 AP-01 Description 3-1/8 Std. 3-1/8 ALT/VSI 2-1/4 Std. Pan Head Screws Countersunk Screws Accessories Alignment Mounting Kit Part No. 10-00335 10-00336 10-00337 10-00338 10-00339 10-03696 Price $8.65 $8.65 $8.65 $9.87 $9.50 $1.75
ME HA
CNC Machined from aircraft grade aluminum. The adapter face is raised .075 to give the flush panel look. Easy to install and easily painted. See www.aircraftspruce.com for specifications. Model Description Part No. Price MK-620 3-1/8 Blank 10-00340 $13.50 MK-621 3-1/8 ALT/VSI Blank 10-00341 $13.50 MK-622 3-1/8 ALT/VSI Plug 10-00342 $19.75 MK-623 3-1/8 to 2-1/4 10-00343 $19.75 MK-624 2-1/4 Blank 10-00344 $13.50 MK-630 KI525 Blank 10-00345 $13.50 MK-631 KI525 to 2-1/4 10-00346 $19.75 MK-632 KI525 to 3-1/8 10-00347 $19.75 MK-633 KI525 to 3 ATI 10-00348 $17.75 MK-640 3 ATI Blank 10-00349 $13.50 MK-641 3 ATI to 2-1/4 10-00350 $19.75 MK-630 3 ATI to 3-1/8 10-00351 $19.75
AP LG EP CS IN EL AV TO PS BV
Take the frustration out of mounting instruments with the use of Superior Panel Technologys EZ Nuts. Adhesive tape securely holds nut ring in place. No realignment if instrument is later removed. Aluminum bezel is treated to prevent corrosion. The pressed in stainless steel inserts eliminate the problem of striped threads. Simply cut off one corner if only three screws are needed. Save labor time when compared to grasshopper nuts. Includes four 1-1/2 non-magnetic black oxide stainless steel, pan-head screws. Stronger than brass. Includes four black nylon washers to prevent marring of the panel. *100 degree countersunk screws available and are sold in packs of eight. 3-1/8 Bezel ................................P/N 11-01830 ............ $8.95 2-1/4 Bezel ................................P/N 11-01831 ............ $8.95 Black-Oxide Stainless Steel Countersunk screw package (set of 8) .....................................P/N 11-06546 ............ $3.95 Black-Oxide Stainless Steel Pan head screw package (set of 8) .....................................P/N 11-09911 ............ $2.95
These hinged pitot tube protectors open automatically in take off at speed of about 40 mph and close automatically at end of landing roll. Model No. 1 2 3 4 Part No. 10-02000 10-02100 10-04968 10-04969 Fits Pitot Tube Sizes 1/4 O.D. 1/2 O.D. 3/16 O.D. 3/8 O.D. Price $7.65 $7.65 $7.65 $7.65
This 3 x 24 orange vinyl streamer with black letters, features a grommet for a clip ring to attach anywhere on the aircraft. High visibility, fire resistant material. P/N 15200 ..................$6.85
PITOT SHIELDS are a fail-safe pitot tube cover that will protect the pitot tube from contamination by insects, debris and ice while the airplane is on the ground. It is friction-fit to the pitot tube and has a calibrated flat-plateforward design that, upon reaching a specific velocity, will release from the pitot tube and fall harmlessly away, allowing for normal airspeed indications. The cover utilizes EVA foam that is UV resistant and stable at temperatures reached by heated pitot tubes. It is a highly visible color with the words REMOVE BEFORE FLIGHT printed and visible from all directions. This pitot tube cover is soft, but tough. It will not damage aircraft surfaces when it comes off during ground roll, nor will it be a potentially hazardous foreign-object on the runway. For 5/8 pitot tube.......................P/N 10-00491 .......... $19.95 For 3/4 pitot tube.......................P/N 10-00492 .......... $18.95 For Piper pitot tube ....................P/N 10-00493 .......... $18.95
455
PITOT TUBES
UNHEATED PITOT TUBES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AN5812 PITOT TUBE - This heated pitot tube mounts under the
wing. Used on Mooney, Beech, Piper, Maule, American Aviation aircraft, Glasair & Glastar. Threaded outlet fits 1/4 size AN tube fittings. Use 2.023x.857x.049 4130 Streamline Tubing to fabricate mount. AN5812-12 (12V) (10 amp.) .................. $879.95 AN5812-1 (24V) (15 amp.) .................... $837.00 Phenolic connector receptacle P/N 10-00032............................. $69.50
leading edge of spar. Aluminum tube 24 long, 1/4 dia. May be cut to shorten. P/N 15133 ................$19.85
L-SHAPED TYPE Flange mounted L-shaped model for under-the-wing mounting. 1/4 dia. aluminum tube. P/N 15135 ................$28.75 L-SHAPED PITOT-STATIC TUBE Same design with static tube added. For pitot tube cover order #15220 or 10-02100 (flip up). P/N 15144 ..............$34.85 STRAIGHT TYPE PITOT-STATIC TUBE Clamp-mounted for leading
edge of wing. 14-1/2 long. May be shortened, formed or shaped to best angle of attack. 1/4 dia. aluminum tubes. All installation hardware furnished. P/N 10-01800 ...........$26.75
STRUT TYPE PITOT-STATIC TUBE Simple L-shaped design for clamping to strut. 1/4 dia. aluminum tubes. P/N 10-01900 ...........$32.50 MAST-MOUNT PITOT TUBE - Designed for mounting in 3/4 O.D. x
.049 wall aluminum tubing (not furnished). Machined from solid aluminum. Polyethylene fitting for 1/4 I.D. hose included. P/N 15170 ................$35.85 Pitot system combines pitot and static functions in one tube. Used for years on many different aircraft. Comes complete with mounting block to install it. P/N 10-00476 .........$198.00 This pitot-static sump bottle collects moisture in the aircrafts static system which prevents water damage to panel mounted instruments. Used in many Cessna aircraft. Measures 1.625 dia. x 4.75 long. Cessna ......................P/N 10-00630 ...........$13.50 Aluminum static port for mounting through 9/16 dia. hole in side of fuselage. Base has 1/8 NPT female port for connecting to static line (polyethylene fitting included). Install with 3/32 dia. flush rivets. P/N 15160 ...............$16.85 Aluminum static port mounts from outside of fuselage through 9/16 dia. hole. Secure to skin with 9/16 Pal nut & lock washer on inside. Includes (1) 0700-153 polyethylene fitting. P/N 15165....... $19.50 Aluminum static port mounts from outside of fuselage through .560 dia hole. Secure with four countersunk 100o 3/32 rivets. Includes one 0700-153 polyethylene fitting. P/N 15175 ............................. $18.90 Aluminum single engine cessna type static port. External mounted through a 19/64 hole. Can be used on fabric, composite or aluminum. No need for rivets. 1-3/8 dia.x1 depth. Ideal for homebuilts of all types. P/N 10-00250 .......................$17.75 This aluminum static port is designed for high performance composite aircraft. Simply bond through the fuselage from the outside. Base has a 1/8 NPT for connecting to the static line. Furnished with installation instructions. Sold in set of 2. P/N 10-00229 ...................... $39.95
AN5814 PITOT-STATIC TUBE - Same design as AN5812 pitot tube but with heated static tube added. Used on Glasair & Glastar (Piper No. 305-12). AN5814-12 (12V) (20 amp.) ........................................... $2,024.00 AN5814-2 (24V) (15 amp.) .............................................. $1,876.00 AN5813-1 PITOT TUBE - The AN5813-1(PH500) is the standard replacement heated pitot tube for twin Cessnas with 24V systems. Draws 3-4 amps and measures 93/4 long. Mounts in 1.18 diameter tube. Dull finish. P/N 10-00064 ........ $954.50
The AN5812 heated pitot tube has been used on a wide variety of aircraft over the years and is now available for experimental aircraft. Made from brass and weighing 1.5 lbs, these imported pitot tubes meet the AN specifications. Model No. Description Part No. Price 12-AN5812 12V, standard 10-00984 $589.00 12-AN5812-1 12V, for RVs 10-04199 $586.00 12-AN5812-2 12V, left and right drain holes 10-04201 $586.00 24-AN5812 24V, standard 10-00985 $580.00 24-AN5812-2 24V, left and right drain holes 10-04202 $579.00 PT-001 non-heated, 1 drain hole 10-04224 $346.95 PT-002 non-heated, left and right drain hole 10-04225 $346.95 30-PT1000 Mounting bracket for standard 10-01063 $37.50 30-PT2000 Mounting bracket for RVs 10-02276 $99.00 The Gretz Aero GA-1000 is molded from a very high-tech polymer material that has nearly the same thermal conductivity as that of metal. This design has electronics embedded in the Pitot tube. Comes with a small electronic control module to control the heat of the Pitot as well as to provide information to the pilot regarding thermal and heater performance of the Pitot tube. A 3/16 diameter multi-conductor cable that has a LED board already attached that will mount conveniently on the panel. Will fit the Gretz mounting bracket kits that were designed for other popular Pitot tubes. Come with the electronic control module, the LED board and cable, Pitot mounting screws, electronic control module mounting hardware, and complete instructions for installation and use. P/N 10-01715 .................$425.00 The Gretz GA-500 is the same shape and color as the heated GA-1000 Pitot tube, but does not include the heater, electronic instructions, etc. It will mount into the same Gretz mounting bracket kits. P/N 10-01716 .................$125.00 This non-heated non-IFR welded pitot tube assembly. It is intended for the experimental VFR aircraft market. The tube and mast are from 4130 tube welded in a fixture to assure alignment. The orifice is produced from aircraft grade aluminum. The pressure tube is polyethylene for easy connection to the aircraft pitot system. Dimension: 6 x 5 x 2-1/2 P/N 10-03637 .....$148.95
STATIC PORTS
Incorporates the mount and the tube in one convenient unit, making it no longer necessary to have a separate mount. This unit further enhances the building experience as there is no protruding mast from the wing if it is to be stored during the building process. Made from a single piece of 6061 aluminum making it strong and long lasting. The unit has been lightened in the interest of weight savings. Not for IFR use. P/N 10-03633 ..........................$199.00
This Falcon Gauge Mounting Bracket for Pitot Tubes works with heated and non-heated tubes.Material: Aluminum Alloy Standard Mounting Bracket ................................P/N 10-01063 ... $37.50 Mounting Bracket for RVs .................................P/N 10-02276 ... $99.00 Avionics engineers needing AN5812-mount pitot tube and AN5814-mount pitot-static tube compatibility but requiring the latest in low-power, low-mass, and small-size technology can now specify SpaceAge Control 4380-tpe air data probes. Meet FAA TSO C16a deicing requirements. Weighs in just 1/4 pound, and have a power consumption of just 45 watts continuous.
Description 4450-03 Pitot-Static 28V 4450-04 Pitot-Static 28V Drain Hole Top Bottom Part No. 10-03640 10-03641 Price $1,069.00 $1,069.00
The pitot tube is the sensor for aircraft instruments. It consists of a cylindrical tube open at the front to sense total pressure (measuring pressure for airspeed indicators) and slotted along the sides to sense static pressure. These pressures must then be carried to the instruments by hoses. ..................P/N 10-03854 ... $29.25
456
SPACEAGE PITOT
This angle of attack instrument is designed for experimental aircraft pilots. The AOA Professional includes a four color liquid crystal display and a aural voice system which warns of critically high AOA, gear position errors and installation/hardware errors. There are no ugly probes, vanes or protrusions to slow you down or accumulate ice. For Composite Construction P/N 10-00016 ....................... $1,479.00 For Metal Construction P/N 10-00736 ....................... $1,479.00
CM WP ME
Developed in the UK by Nigel Reddish, these stall warners have been installed in many RV series aircraft. the vane is ground adjustable and installation is simple. Includes a micro switch and vane. For experimental aircraft only.Note: The Mark 2 Version is practically the same as the Mark 1, the only difference is the vane on the Mark 2 is longer. The installation is the same as the Mark 1.only. Mark I .................... P/N 10-00189....................... $89.95 Mark II ................... P/N 10-02686....................... $89.95 The RiteAngle Basic, is a high quality AOA system for aircraft without flaps. This is the most accurate low cost AOA system available to customers today. Note: The Basic system is for aircraft without flaps only. The RiteAngle Basic uses electronics not available during earlier designs of RiteAngle systems. Although operationally similar to prior RiteAngle products, the RiteAngle Basic is a totally new, more efficient, economical design. It is a modern up to date system, that accurately determines your aircrafts angle of attack. This series uses our proven, easy-to-understand, five LED display. Green indicates Safe, Amber indicates Caution, and Red indicates Danger. The On Speed AOA, 1.3 Vso will be correct, regardless of bank angle, density altitude, or any of the other variables where the airspeed might be inaccurate P/N 11-10388 .....$315.00 The RiteAngle Buddy also uses electronics not available during design of the initial RiteAngle systems. Although it is similar to the prior RiteAngle systems, for aircraft with no flaps, The RiteAngle Buddy operationally, is a totally new design using an enhanced display. Note: The Buddy is for aircraft without flaps only. The RiteAngle Buddy is a modern, up to date system that accurately determines your aircrafts angle of attack. This series uses an improved easy-to-understand LED display. This instrument is designed to FAA standards. Green indicates safe, amber indicates caution, and red indicates danger. P/N 11-06626 .....$410.95 Ema AOA Basic And Buddy Sensor ........ P/N 11-10392..............$50.00
Designed for those tight panels, requiring simplified features but still uses revolutionary patent pending sensing techniques. This angle of attack instrument is only 1/2 wide by 1-3/4 by 1-1/4 deep overall and will fit on or under your glare shield or between instruments as a panel mount in either the vertical or horizontal position. The display is a three color LED ladder and includes the same aural voice warnings as the AOA Professional. It can be powered with a 9V battery or by standard 14 or 28 aircraft bus systems. Excellent for RVs, Glasairs, Lancairs, and other homebuilts. For Composite Construction P/N 10-04792 .......................... $874.00 For Metal Construction P/N 10-04793 .......................... $874.00
HA AP LG EP CS IN EL AV TO PS BV
Warns by light and horn of any danger of an approaching stall regardless of the flight maneuver. Never signals unless a stall is imminent. Consists of an instrument panel unit (fits standard 2.25 hole) containing a warning horn & signal light, and a small vane wing unit which operates a relay. Operation of the instrument doesnt depend upon air speed but rather on the air flow conditions of the wing. Complete with installation kit & instructions. Installation time: 2-6 hours.
Description Complete Lit Lift Detector Horn & Light Model 164R (12V) 164S (24V) 164 R (12V) S (24V) Part No. 164R 164S 164 10-22712 10-22724 Price $2,978.00 $2,958.00 $1,898.00 $1,459.00 $1,089.00
Few pilots need reminding of the catastrophic consequences of an unintentional stall at low level.
A frequent sequence of events is distraction of pilot attention, leading to lack of speed control, with the stall rapidly followed by rotational entry into a spin. Steep ground impact follows all too quickly. We all know about this, but why do stall accidents continue to kill pilots and their passengers year after year? Factors include the rapidity with which our low inertia aircraft lose airspeed, their sensitivity to gusts, the higher frequency of engine failure - and so on. However, very few Experimental and PFA aircraft are fitted with audible stall warners, and yet we are flying aircraft that need them. Virtually every certified production light aircraft has a stall warning system as standard. The ACI Stall Warner is for experimental aircraft only. P/N 10-00235 ........... $311.00
With the RiteAngle Elite system you have the advantage of having a system which was designed to the FAA guidelines for use on certified aircraft, without all the expense of tracking of parts and having it assembled by a PMA facility, and of course not having to pay for the time, effort, and work involved in getting the STC! The RiteAngle Elite is a modern, up dated system that accurately determines your aircrafts angle of attack. Easy to understand - Green Safe, Amber Caution, Red Danger. There are no computed values, the vane actually measures the relative wind. Ema Elite Angle Of Attack ....................... P/N 11-10389............$750.00 Ema AOA Small Vane Option.................. P/N 11-10390..............$49.95 Ema Elite Enhanced Display Opt ............ P/N 11-10391............$175.00
MPL 500 Series switches offer pressure, vacuum, and differential sensors, sensitive to as low as 0.05 in/H 2 O. Their accuracy and reliability offer the designer an excellent general purpose low pressure to electric interface for monitoring and control applications. Miniature size and low cost make the 500 Series ideal for OEM applications. MPL 503 is a Range B switch, which is 0.50 to 3.00 in/H2O P/N 11-02379 ........................... $47.50
457
The AOA 2000 REK Enhanced Classic 2 1/4" Display Kit incorporates the same great performance of the Standard Classic Kit plus it has an inline display disconnect connector, a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings. 16 (5mm) ultra birght, colored LED readout of available lift when calibrated to the aircraft. The kit comes complete with all parts including the AOA probe, mounting hardware, 9"x9" mounting plate, fittings, 25 ft of blue and white hoses, AOA interface module, display, prewired interconnect cables, installation and calibration manuals. P/N 11-10455 ............$1,050.00
The Alpha Systems AOA Mechanical Kit includes everything needed to install an angle of attack gauge in any aircraft. This kit includes probes, probe mounting plate, all fittings, 21ft. of hoses, the AOA gauge, and custom dash mount with mounting plate. PN 11-06446 ..........$745.00
The Alpha Systems AOA mechanical kit includes everything needed to install an angle of attack gauge in any aircraft. This kit includes probe, probe mounting plate, all fittings, 21 feet of hoses and the AOA gauge with a 2-1/4 standard panel instrument opening mount. PN 11-05599 ..........$695.00
The AOA 3000VEK Enhanced Classic 4 Vertical Display kit incorporates the same great performance of the Standard Classic kit plus it has an inline display disconnect connector, a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings. 16 (5mm) ultra birght, colored LED readout of available lift when calibrated to the aircraft. The kit comes complete with all parts including the AOA probe, mounting hardware, 9x9 mounting plate, fittings, 25 ft of blue and white hoses, AOA interface module, display, prewired interconnect cables, installation and calibration manuals. P/N 11-10456 ............$1,050.00
The Alpha Systems AOA electronic kit includes everything needed to install an angle of attack display in any aircraft. This kit includes probe, probe mounting plate, all fittings, 21 feet of hoses, the AOA digital control module with audio beeper, power cord and round LED display with a 2-1/4 standard panel instrument opening mount. PN 11-05596 ..........$895.00
The AOA 3000HEK Enhanced Classic 4 Horizontal Display kit incorporates the same great performance of the Standard Classic kit plus it has an inline display disconnect connector, a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings. 16 (5mm) ultra birght, colored LED readout of available lift when calibrated to the aircraft. The kit comes complete with all parts including the AOA probe, mounting hardware, 9x9 mounting plate, fittings, 25 ft of blue and white hoses, AOA interface module, display, prewired interconnect cables, installation and calibration manuals. P/N 11-10457 ............$1,050.00
The Alpha Systems AOA electronic kit includes everything needed to install an angle of attack display in any aircraft. This kit includes probe, probe mounting plate, all fittings, 21 feet of hoses, AOA digital control module with audio beeper, power cord and 4 bar graph LED vertical display. PN 11-05597 ..........$895.00
The Enhanced Ultra 2 1/2 Vertical AOA Display kit features include an inline display disconnect connector, a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings and a 16 (5mm) ultra birght, colored LED readout of available lift when calibrated to the aircraft. The kit comes complete with all parts including the AOA probe, mounting hardware, 9x9 mounting plate, fittings, 25 ft of blue and white hoses, AOA interface module, display, prewired interconnect cables, installation and calibration manuals. P/N 11-10458 ............$1,300.00
The Alpha System AOA electronic kit includes everything needed to install an angle of attack display in any aircraft. This kit includes probe, probe mounting plate, all fittings, 21 feet of hoses, AOA digital control module with audio beeper, power cord and 4 bar graph LED horizontal display. PN 11-05598 ..........$895.00
Visit our website to see how it works and to download product brochures.
The Enhanced Ultra 2 1/2 Horizontal AOA Display kit features include an inline display disconnect connector, a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings and a 16 (5mm) ultra birght, colored LED readout of available lift when calibrated to the aircraft. The kit comes complete with all parts including the AOA probe, mounting hardware, 9x9 mounting plate, fittings, 25 ft of blue and white hoses, AOA interface module, display, prewired interconnect cables, installation and calibration manuals. P/N 11-10459 ............$1,300.00
Heated Probe has a built in heater of 12V DC that minimizes the potential for ice build up on the leading edge of the probe. Probe comes complete with high temperature fittings and tubing. It is a drop in replacment and can be used or upgraded in the existing Alpha Systems AOA mounting plate. 12V Heated Probe ........P/N 11-09983 .........$157.95 24V Heated Probe ........P/N 11-09984 .........$157.95
The Enhanced Legacy line of AOA display kits utilize ultra bright LED driven colored segments to give the pilot AOA readout when calibrated to the aircraft. Kit features a direct stereo connection of a built-in audio interface system for multiple selectable tones or voice warnings with display connector quick disconnect, electronic pushbutton calibration. The Enhanced Legacy display is housed in a billet aluminum case and comes standard with panel mount brackets. Additional glare shield mounting options allow for the display to be mounted above the glare shield in the pilots peripheral vision. Kit includes probe, probe mounting plate, all fittings, 25 ft of hoses, instruction manual, AOA digital control module, power cord, aux cable and 2 1/2 chevron style, LED driven dsplay. P/N 11-10460 ............$1,600.00
458
COMPASSES
Factory-new Airpath compasses as used in almost all production aircraft. 2.25 size. Model Mounting C2300 Panel C2300- S. Hemisphere Panel C2300-L4 Panel C2300-L4- S. Hemisphere Panel C2400-L4P Pedestal C2400-L4P - S. Hemisphere Pedestal C2400-L4VT Overhead C2400-L4VT - S. Hemisphere Overhead 14V ......P/N 11-04016 $1.35 ea Lighting None 12V Red 12V Red 12V Red 12V Red 12V Red 12V Red 12V Red P/N 10-01340 10-01342 10-01341 10-01387 10-01343 10-01344 10-01345 10-01346 Price $134.50 $139.95 $155.95 $159.50 $174.00 $184.95 $216.95 $228.95
AIRPATH COMPASSES
Kit consists of diaphragm, 1/2pt of compass fluid & face glass gasket. Repair Kit (with fluid) P/N 10-08000 ....................................$16.95 Repair Kit (without fluid) P/N 10-08020 ....................................$15.75 10-00505 Compass Fluid: 1/2 Pint 10-00368 10-01659 P/N 10-08100 ......................................$1.60 Quart .......................................................... P/N 10-08200 ..........$5.25 Airpath Compass Deviation Card Holder ... P/N 10-01658 ..........$1.50 Deviation Card ........................................... P/N 10-01659 ..........$0.75 CB21-914H - Inner gasket ........................ P/N 10-00505 ..........$6.95 C21-915G Spacer gasket .......................... P/N 10-00368 ..........$1.85 Diaphragm Only ......................................... P/N 10-01386 ..........$6.50 Glass Compass Lens for C2300/C2400 series compasses. P/N 10-08010 ........$17.65
10-08100 10-01386
The Precision Vertical Card Compass is a totally new concept for todays aircraft. It is a dry compass, designed to replace the float/liquid type compass; no more leaking fluid or backward azimuth readings. It uses eddy current damping and as such has no overshoot. It consists of a 2vertical rotating dial which is compared with a fixed miniature airplane (lubber line) to present the magnetic heading of the aircraft at all times. Heading information is more natural because the heading is read at the 12 oclock position and off the nose of the miniature aircraft. The compass card rotates and presents all quadrants in their true relation to line of flight. Requires no power (except for lighting) to operate. Fully TSOd. Installed in many current production aircraft and helicopters. Size: 2-7/8H x 2-3/8W x 2-1/8D. Wt. 0.6 lb. After installation, compass must be compensated using standard compensation procedures. Also used in sailplanes. Bracket / mount is required for installation and is not 14V............................ P/N 10-00421.......... $288.95 included with unit. 28V............................ P/N 10-00423.......... $288.95 For Southern Hemisphere Add -S0 to Part Number.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
C24-730A Houding for C2400L4P Top Panel Mount P/N 10-04696 ...................$19.25 C24-727A Housing for C2400L4VT Windshield Mount. P/N 10-04697 ...................$20.50 C2400 W/R INNER CASE - Replacement Compass only for Model 2400L4VT. P/N 10-04718 ...................$98.50 These compasses are very similar to the Airpath C2400 style compasses above but are priced more cally. New manufacture. Not certified. Model No. Description Part No. Northern Hemisphere MCPN-2 Panel Mount 10-02067 MCPN-2L Panel Mount, Lighted 10-02069 MCDN-2 Pedestal Mount 10-02071 MCDN-2L Pedestal Mount, Lighted 10-02070 Southern Hemisphere MCPS-2 Panel Mount 10-02068 MCPS-2L Panel Mount, Lighted 10-02243 MCDS-2 Pedestal Mount 10-01704 MCDS-2L Pedestal Mount, Lighted 10-02070
C2300 & economiPrice $93.75 $99.75 $109.95 $109.50 $99.85 $102.95 $112.95 $109.50
It is easy to read presentation and see the complete 360 degree dial in proper relation to your aircraft heading. 14V, lighting. 2-1/4 Model Description Part No. Price Improved for install on metal airMCVC-2L-A 10-04173 $199.95 craft, 12-14V light Improved for install on metal airMCVC-2L-A-M 10-04174 $228.95 craft, 12-14V light with bracket Vertical Card Compass Universal 30-V-0001 10-04175 $24.85 Mounting Bracket
COMPASS COMPENSATOR
It is easy to read presentation and see the complete 360 degree dial in proper relation to your aircraft heading. 12V DC, lighting. 2-1/4" P/N 10-04489 .................$229.95
It is easy to read presentation and see the complete 360 degree dial in proper relation to your aircraft heading. 12V DC, lighting. 2-1/4 P/N 10-04490 .................$246.95
Use this .005 x 5 x 12 metal strip to shield the precision PAI-700 compass from magnetic interference in the instrument panel. P/N 11-00973 .......... $19.75
This small non-magnetic screwdriver blade is ideal for adjusting magnetic compasses. This blade is durable, corrosion resistant, & can be put on a key chain until needed. ............P/N 10-07930 ............. $4.35
459
The MD-11 carburetor temperature gauge & B-5 temp. probe are designed to help eliminate carburetor icing by early detection, reduce spark plug fouling, extend engine life, increase range & power, and maximize fuel economy. Designed for use with most Marvel-Schebler & Bendix float type carburetors. FAA approved. Mounts in 2-1/4 instrument hole. 14V carb air temp indicator only .................P/N MD-11-3 ......... $510.00 28V carb air temp indicator only .................P/N MD-11-4 ......... $510.00 B-5 probe only .............................................P/N B-5 .................. $320.95 Mating Connector ........................................P/N 10-01563 .......... $11.90 14V Carburetor Air Temperature Kit ...........P/N 10-02759 ........ $777.00 28V Carburetor Air Temperature Kit ...........P/N 10-02760 ........ $747.00
PRICE $273.95
Delivers extremely accurate readings due to its fully integrated, 4 magnet correction facility. Same features as Pegasus, but is mounted with a fully adjustable bracket. This allows the compass to be mounted in a variety of positions located away from magnetic influences. Size: 20-3/8h x 2-1/4w. Navigator comes in lighted or unlighted versions; 3yr. warranty.
P/N NV-2A NV2C-12 P/N NV2C-12SH NV2C-12V-SH NORTHERN HEMISPHERE LIGHT PRICE P/N NONE $243.00 NV2C-28 12V BLUE $272.00 SOUTHERN HEMISPHERE LIGHT PRICE P/N NONE $273.95 NV2C-28 12V LIT $273.95 LIGHT 28V BLUE PRICE $268.00
PRICE $273.95
Fits into a 2-1/4 or 3-1/8 instrument cut-out (or optional bracket) on the panel. The system works on normal 12 or 24V aircraft electrical systems. No temp gauge, no worries about humidity, no graph. Enables an interface with the audio panel, effectively piping the ice alert warning sound right into the headset. The ICEMAN is a sealed, solid state unit weighing only 5oz and is currently approved by the FAA in the United States, certified by the CAA, by Transport Canada, and validated in Australia. Probe is included with the system. The Iceman is approved for most general aviation aircraft. Approval list available on request Iceman System (2-1/4) ...............................P/N 10-00057 .........$369.00 Replacement Probe.....................................P/N 10-00059 ...........$58.75 Remote Mounting Brckt (for 2-1/4 only) .....P/N 10-00060 ...........$12.50 Patch Cord kit ..............................................P/N 10-00057-1 ........$20.75 3 Front Plate...............................................P/N 10-02163 ...........$13.00 Made in USA. Available in three (3) different mounting configurations (Panel Mount, Remote Mount and Universal Mount) thus providing flexibility for any aircraft installation. GIVES UP TO 5 MINUTES WARNING TIME by illuminating a RED visual ice warning light. LIGHT WEIGHT less than 13 ounces. SIMPLIFIED INSTALLATION keeps installation cost down approx. 1 to 3 man-hours. WARRANTY 3-Years on Electronics Box and 1-Year on Probe. FAA-STC SA489EA APPROVED for normal, utility and acrobatic airplanes and helicopters equipped with Continental, Franklin and Lycoming type engines and Precision Air-Motive (Facet or Marvel-Schebler) MA-2, MA-3, MA-3A, MA-3SPA, MA-4, MA-4-5, MA-4SPA, MA-5, MA-6, MA-6AA and HA-6 series carburetors. Installation on other aircraft not specified on the STC may be performed via FAA Form 337. FAA-PMA APPROVED for installation on Type Certificated aircraft. Panel Mount, 12V (107AP-12)....................P/N 10-09900 ..........$374.95 Panel Mount, 24V (107AP-24) ...................P/N 10-03707 ..........$315.00 Remote Mount, 12V (107AP-R-12) ............P/N 10-03708 ..........$498.95 Remote Mount, 24V (107AP-R-24) ............P/N 10-03709 ..........$424.95 Universal Mount, 12 (107AP-U-12) ............P/N 10-03697 ..........$429.95 Universal Mount, 24 (107AP-U-24) ............P/N 10-03698 ..........$435.95 Spare Probe (107AP-P)..............................P/N 10-03710 ..........$187.95 Flow: Instantaneous Display of Fuel Flow , Used: Fuel Used , Remaining: Fuel Remaining , Endurance: Time or Distance Remaining , Required: Fuel Required to Active GPS Waypoint , Reserve: Fuel or Time Remaining at Active GPS Waypoint , Efficiency: Miles Per Gallon (or Liter) Displays Fuel Flow and Fuel Used for Each Engine (Two Engine Systems) Features: Communicates with Handheld or Panel Mount GPS , User Selectable Units (Gallons, Liters, Nautical Miles, Statute Miles) , Low Fuel Warning , Best Fuel Computer Value Available , Large Extreme Operating Temperature Display , Soft Orange Backlight with Automatic Brightness , Weighs 2.6oz 12-28 Volt Compatible , Includes Floscan 201B6 Transducer 0.6-60 Gallons/Hour , Includes Pre-Wired Harness , Connector is pin to pin compatible with many JPI, Hoskins, and Shadin Systems . FC-10 Single Engine (additional sender req.) .. P/N 10-03150 ... $369.95 FC-10 Twin Engine ........................................... P/N 10-03151 ... $535.00 FC-10 With Out Sender .................................... P/N 10-03152 ....$235.95
Designed to be installed on the glareshield using the same location holes required for other compass installations. The compass rose suspended in a silicone-based fluid and features silicone seals to eliminate the problem of leaks and fluid evaporation. Metal expansion bellows allow for flexing in high-altitude, unpressurized flight. The display shows 140 of heading, as opposed to the 90 view offered by standard compasses. TSOd Navigator comes in 6, 12, & 28V configurations, with a 3 year warranty.
Northern Hemisphere Description NV2A-2400 UNLIT COMPASS NV2C-2400 LIT COMPASS 12V NV2C-2400 LIT COMPASS 28V Southern Hemisphere Description NAV TSOD COMPASS 28VLIT SH NAV NV2A-2400 UNLIT COMPASS SH NV2C-2400 LIT COMPASS 28V SH NV2C-2400 LIT COMPASS 12V SH NAV TSOD COMPASS UNLIT SH Accessories INSTALL KIT NAV.SERIES COMPASS Part No. 10-00401 10-00467 10-00468 Part No. 10-02131 10-02132 10-02134 10-02133 10-02129 Part No. 10-02123 Price $246.95 $254.95 $254.95 Price $273.95 $261.95 $235.95 $273.95 $246.95 Price $40.75
Designed to indicate very accurate magnetic headings. The compass card is graduated in 1/2 degree intervals and the compass is supplied with a calibration chart indicating any deviations in minutes of arc. Ideal for use with larger aircraft. A specical reverse-read version (954-2399REV ) is available to indicate the same headings as those read from the aircraft instruments during the compass swing operation, when viewing from the front of the aircraft. Magnetic headings are viewed through a magnified prism and a special mounting Tripod is available (non-magnetic tripod) to ensure steady readings PN 1004231 Warranty: 3 years Accuracy: Better than 30 Minutes Tilt: 7 Degrees Standard Compass ........P/N 10-04230 ........$2,474.00 Reverse Read Compass.. P/N 10-04817 ......$2,474.00 Tripod............................... P/N 10-04231 .........$865.00
Designed to meet demanding requirements of the Aviation and Military environments where accurate bearings are required. Supplied with a calibration certificate and can be configured with reversed readings to assist with aircraft wings. Ideal for use with small to medium aircraft. The liquid damped card is divided in 2 degree increments.Warranty: 3 years. Dial Markings: DegreesTilt: 15 Degrees. Standard Compass ........P/N 10-04232 ........$1,294.00 Reverse Read Compass P/N 10-04816 ........$1,334.00
Designed for the experimental aircraft owner who wants instantaneous flight information previously reserved only for transports and private jets. Features complete Winds Aloft information, Airspeed information including: True Airspeed and Mach number, Altitude information such as Density Altitude and Vertical speed, and both Total and Saturated Air Temperature. Complete with GPS communication enabling it to display fuel computer data. The Performance Computer function calculates, instantaneously, Percent Horsepower based on the engine manufacturers power chart. Backup Tachometer and Manifold Pressure indications. Compatible with most handheld and panel mount GPS units. ...................................P/N 10-03154 ..... $699.00
460
ENGINE GAUGES
2-1/4 UMA MANIFOLD PRESSURE GAUGES
Manifold pressure is one factor used to obtain correct power setting of the engine. The indicators are temperature and altitude compensated. Matte-white dials. Units are new. Manufactured by UMA. 2-1/4 Gauge, 10-50 Hg. .......... P/N 10-11200 . $131.95 2-1/4 Gauge, 10-35 Hg. .......... P/N 10-11250 . $131.95 UMA optional internal lighting .. P/N 11-07239 ... $49.95 FAA Approved for Aeronca 7ECA, 7GCAA, 7KAB, 7GCBC, 8KCAB, 8GCBC. Model 13340-00 Kit is designed for panel holes of 2 1/16 diameter to 2 1/8 diameter, equipped with an adapter to fit a 5/8- 18 female thread. For panel holes exceeding 2 1/8 diameter and up to 2 3/4 diameter, accessory washers are available for easy installation. Capillary tubes for AVOX Systems Oil Temperature Gauges are a standard 5 long. Range: 100F to 250F. P/N 10-04647 ................. $199.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Falcon Gauge Manifold Pressure Gauge is designed and manufactured for use on aircrafts and is a standard diaphragm pressure instrument. This indicator is temperature and altitude compensated. Manifold pressure is one of the factors required to obtain the correct power setting of the aircraft engine. 10-50 IN HG ................................................ P/N 10-02269 ........ $176.95 10-35 IN HG ................................................ P/N 10-02270 ........ $166.85
Brass fitting used to shorten long capillary bulbs for use in light aircraft engines. Internal 5/8-18 threads mate with fitting on bulb. External 5/8-18 threads fit into engine. P/N 95527 .......................... $6.90 AN5771-2 Military style gauge with sq. case. Mounts in 2-1/4 dia. hole. New surplus. Matte-White Dial (0-150 PSI) P/N 10-00955 ................. $249.95
A quality gauge which is complete with all installation fittings. Range is 100-250 F. 5/16-18 female capillary adapter fitting. 60 lead length Not FAA approved. P/N 10-00954 ................. $113.95
P/N 10-00080
3-1/8 Gauge, 10-35Hg. P/N 10-00080 ................ $232.95 3-1/8 Gauge, 10-50Hg. P/N 10-11300 ................ $232.95 UMA optional internal lighting P/N 11-07239 .................. $49.95
Scotts quality Oil Pressure Gauge features 0-120 PSI range and 1/8 NPT thread on flared tube fitting. Not FAA Approved P/N 10-00956 ................. $228.95
Displays the differential pressure between the fuel system and air box on turbo charge engines where it is necessary to maintain constant fuel pressure that is above the airbox pressure. Sender sold separate. (Requires the use of a 1EU007D UMA different pressure sneder.) 1 1/4 ........................................................... P/N 10-00979 ........ $177.95 Sender 0-7 PSI ............................................ P/N 10-00980 ........ $118.95
This kit contains 4 Weatherhead brass fittings with 1/8 pipe thread & 6 ft. of 1/8 Nylo-Seal tubing. Compatible with most mechanical oil pressure gauge installations. P/N 10-12000 ..................... $5.50
Presently in use in government and general aviation industry under liquid and gaseous conditions, this sensing device exceeds stringent U.S. Military Specifications for response time, burst pressure, and AC high potential tests. P/N 10-01668 ...........................$158.50
Rochester oil pressure gauges have matte-white dial with black bezel. Mount in 2-1/16 dia. hole. 1/8 NPT port fits AN910-1D coupling. New mfg. 0-50 PSI ...................... P/N 10-22301............. $83.50 0-80 PSI*..................... P/N 10-00015............. $39.75 0-120 PSI .................... P/N 10-22302............. $47.50 *Chrome Bezel
Oil temperature range is -50 to 150C, oil pressure 200 psi, fuel pressure 0-25 psi. The pressure gauges operate by direct connection to the appropriate system and the oil temperature by an electrical resistance bulb probe. New installation requires Cannon plugs & cable clamps for instrument and resistance bulb. Certified Overhauled Unit - Gauge ............... P/N 10-12800 ....... $595.00 3-IN-1 White Electric Gauge Farenheight .... P/N 10-03144 ....... $595.00 MS3106A-14S-2S Cannon Plug P/N 10-00790 ......... $10.95 MS3057-6A Cable Clamp for Instrument ..... P/N 10-00957 ........... $3.30 MS28034-1 Res. Bulb,1-7/8 (#563BH) ...... P/N 10-00953 ....... $148.95 MS3106A-12S-3S Cannon Plug (Res.Bulb) P/N 10-00958 ......... $15.85 MS3057-4A Cable Clamp for Res. Bulb ...... P/N 10-00959.......... $4.60
Our Torque Indicators are a wet line, direct reading bourdon tube type instru-ment, housed in a 2 diameter case. Unit can be calibrated over a wide rage of PSI input to direct read torque. Units can be furnished to your specifications. Indicate needed pressure input and pressure-to-torque conversion. This unit cannot be damaged by oil back up in vent line. DIMENSIONS: 2 diameter x 2.125 length, Weight: 0.4 lbs, Power: Wet line direct reading pressure gage
Model No. / Part No. 27-3007-1 P/N 10-03441 27-3007-4 P/N 10-03442 27-3007-7 P/N 10-03443 Description 0 to 1800 FT/LB, Green Arc 0 - 1628, Red Line at 1628 0 to 75 P.S.I, Green Arc 0 - 64.4, Red Line 64.4 0 to 75 P.S.I 0 to 53 Price $469.95 $469.95 $469.95
Rochester oil temperature gauges have matte-white dial with black bezel. Mount in 2-1/16 dia. hole. New manufacture. Furnished with one 5/8-18UNF X 5/8-18UNF adapter nut. Available in the following temperature ranges and capillary lengths. P/N 10-11600 ................................... 100-250F .... 60 Cap .........$83.75 P/N 10-11700 ................................... 100-250F .... 72 Cap .........$91.50 P/N 10-11800 ................................... 00-250F ...... 144 Cap .......$89.95 10-11900 .......................................... 100-250F .... 48 Cap .........$91.50 Adapter Nuts Only: 44-0024 5/8-18UNF x 5/8-18UNF .......$9.95
Housed in a 2 diameter case, this instrument can be calibrated in C or F. Oil Temperature is sensed by a MS280341 resistance bulb. DIMENSIONS: 2 Dia. x 3.12 L Weight: 0.4 lbs Power: 28VDC Connector: MS3112E8-4P 29-1004-10 - Green Arc 0 C -110 C, Yellow Arc -40 C - 0 C Red Line -40 & 110 C ...................................... P/N 10-03445 .................$375.95
461
These factory new fuel pressure gauges from UMA fit standard 2-1/4 panel hole. They are mechanical, wetline gauges and require no sending unit. 0-25 PSI ....................... P/N 10-02356 ............ $180.95 0-50 PSI ....................... P/N 10-00316 ............ $180.95 0-10 PSI ....................... P/N 10-22201 ............ $180.95 0-30 PSI ....................... P/N 10-22203 ............ $180.95 0-100 PSI ..................... P/N 10-22205 ............ $179.50
This reliable and rugged instrument is designed using a moving coil type movement for aircraft use. The electronic pressure gauge connects to pressure transducer which mounts directly to aircraft engine. Made in USA. Order transducer P/N 10-22209 separately. 0-15 PSI (pictured above) ...........P/N 10-22209 ..... $131.95 0-30 PSI.......................................P/N 10-22210 ..... $131.95 0-80 PSI.......................................P/N 10-02060 ..... $131.95 UMA Pressure Sender 1EU100G for 0-80 PSI ( for P/N 10-02060)......................P/N 10-01060 ..... $112.95
These factory new oil pressure gauges from UMA fit standard 2-1/4 panel hole. They are mechanical, wetline gauges and require no sending unit. 0-50 PSI ....................... P/N 10-22240 ............ $179.50 0-130 PSI ..................... P/N 10-22242 ............ $180.95 10-100 PSI ................... P/N 10-02357 ............ $179.50
This mechanical, direct hook-up pressure indicator is ideal for monitoring the engine pump cooling system. Suitable to a wide variety of homebuilt aircraft applications. Made in USA. 0-10 PSI (water) P/N 10-22247 $167.95
This reliable and rugged instrument is designed using a moving coil type movement for aircraft use. The electronic pressure gauge connects to pressure transducer which mounts directly to aircraft engine. Made in USA. Order transducer separately. 0-80 PSI ......................P/N 10-22245 ..... $132.95
Case is molded ABS plastic. Wt:1.4oz. white dial markings. 25-125 PSI. P/N 10-22251
Case is molded ABS plastic. Wt:1.4oz. white dial markings. 0-10 PSI. P/N 10-22252
Black and
This instrument is designed to be durable yet lightweight. Excellent for a wide variety of homebuilt aircraft applications. Made in USA. Order probe separately. 0-300F .......................P/N 10-02058 ..... $131.95 Probes 1/8 NPT (Rotax) ........P/N 10-00968 ....... $62.85 3/8-24 (automotive) ....P/N 10-00969 ....... $62.75
This mechanical, direct hook-up pressure indicator is ideal for monitoring the engine pump cooling system. Suitable to a wide variety of homebuilt aircraft applications. Made in USA. -15 to +15 PSI P/N 10-22249 $180.95
This instrument is designed to be durable yet lightweight. Excellent for a wide variety of homebuilt aircraft applications. Made in USA. Order probe separately. 100-300F ........................P/N 10-22285 ..... $131.95
2-1/4 inch UMA Electronic (UMA P/N 12-360-300F) Water Temperature Gauge, Range: 100-300 deg. F P/N 10-02058 ...........$131.95
This 2-14 flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter required. Wt: 9.8 oz. Indicator (0-30) ........P/N 10-02441 .........$168.95 Indicator (0-40) ........P/N 10-22250 .........$179.50 Indicator (0-50) ........P/N 10-22265 .........$178.95 Indicator (0-60) ........P/N 10-02442 .........$179.95 Transmitter ................P/N AN5785 ...........$198.95
While rumors have been circulating regarding a new way to maximize on space, saving instruments, UMA has now developed a product line that can combine any three electronic instruments into a 3-1/8" case. Standard product is with black and white dials, but UMA's reputation is to provide custom range markings and to meet customer demand for specific design. THe 3-in-1 can now satisfy space saving, custom markings, and combine any selection of 3 instruments into a 3-1/8" opening to fit your needs ...Customization is Great!! *Note - Senders are required and sold separately. P/N 10-03452 ....................$411.95 UMA Range Markings ......................P/N 10-02792 ....................$125.00
1-1/4 Dia. New manufacture by UMA. 0-10 PSI Fuel Press.........P/N 10-12100 ...........$178.95 0-35 PSI Fuel Press.........P/N 10-12200 ...........$178.95 0-50 PSI Fuel Press.........P/N 10-12300 ...........$178.95
462
2-1/4 inch UMA Electronic (UMA P/N T12212U300F000) Water Temperature Gauge Range: 100-300 deg. F TSO2-1/4, 100-300 F TSOd P/N 10-02428 ..................$188.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Electronic Oil Pressure Gauges connect to a pressure transducer and connects to the gauge with wires. Standard dial markings are black and white. 2-1/4, 2-1/4 inch 2-1/4, UMA Electronic 2-1/4, Oil Pressure Gauge 2-1/4, Case: Valox 420 2-1/4,
Plastic Weight: 4.7 oz.
These gauges use either thermistor or electronic sensors. Standard markings are black and white. 2-1/4, -60-120 F TSOd.....................P/N 10-04670 .................$188.95 2-1/4, -20-120 F ................................P/N 10-02391 .................$131.95
0-60 PSI, TSOd ....P/N 10-02415 ...$181.95 0-80 PSI, TSOd ....P/N 10-02416 ...$181.95 0-100 PSI, TSOd ..P/N 10-02417 ...$188.95 0-100 PSI ..............P/N 10-02424 ...$131.95 150 PSI .................P/N 10-02761 ...$131.95 SENDER NOT INCLUDED
TSOd Carburetor Temperature 2 1/4 gauge. Range from -60 - 120F. NOTE: This is the standard black and white gauge. For color range markings as shown you must add the color range markings part no. to your order. P/N 10-03465 ...............$188.95 UMA Color Range Markings ..................P/N 10-02792 ...............$125.00
Electronic Fuel Pressure Gauges connect to a pressure transducer and connects to the gauge with wires. Standard dial markings are black and white. 2-1/4, 0-7 PSI, TSOd ....... P/N 10-02412...$188.95 2-1/4, 0-15 PSI, TSOd ..... P/N 10-02413...$188.95 2-1/4, 0-60 PSI, TSOd ..... P/N 10-02414...$188.95 2-1/4 inch UMA Electronic 2-1/4, 0-15 PSI ................. P/N 10-02421...$131.95 Fuel Pressure Gauge 2-1/4, 0-30 PSI ................. P/N 10-02422...$131.95 Case: Valox 420 Plastic 2-1/4, 0-60 PSI ................. P/N 10-02423...$131.95 Weight: 4.7 oz. SENDER NOT INCLUDED
Electronic Manifold Pressure gauges connect to a pressure transducer which connects to the aircrafts engine and indicates the absolute pressure in the intake manifold of the aircraft. These units are very precise and avoid plumbing issues. Standard markings are black and white. 2-1/4, 5-35 IN. HG............................................P/N 10-02389 .. $131.95 2-1/4, 5-50 IN/ HG............................................P/N 10-02390 .. $132.95 SENDER NOT INCLUDED
Electronic Hydraulic Pressure gauge connects to a precision, high pressure transducer which mounts directly to the aircrafts hydraulic system. Standard markings are black and white. 2-1/4 inch 2-1/4, 0-2000 PSI, TSOd UMA Electronic P/N 10-02459 ......$181.95 Hydraulic Pressure Gauge Case: Valox 2-1/4, 0-2000 PSI .......P/N 10-02458 ......$131.95
420 Plastic Weight: 4.7 oz.
The digital Outside Air Temperature (O.A.T.) is available in either Fahrenheit or Celsius. Standard models use a Red LED display. 2-1/4, -40-60 C, 270 ...........P/N 10-02387 ...$185.95 2-1/4, -40-140 F, 270 .........P/N 10-02388 ...$185.95 2-1/4, 0-100 C .................................................P/N 10-00205 ...$218.95 2-1/4, -40-165 F ..............................................P/N 10-00206 ...$218.95 SENDER INCLUDED These 2-1/4 dual amp voltmeters are ideal for any aircraft where panel space is limited. Amperage is displayed at all times, and simply push a button to display voltage. Complete with gauge and shunt. Voltage range 0-30 volts. Range: 30 amp..................P/N 10-14680 .........$261.95 60 amp..................P/N 10-14685 ......... $261.95 80 amp..................P/N 10-14690 ......... $261.95 100 amp................P/N 10-14695 ......... $261.95 0-150 amp ............P/N 10-00082 ......... $261.95 UMA Optional internal lighting.....................P/N 11-07239 ...........$49.95 These new manufactured ammeters offer accuracy, rugged construction, and contemporary styling. Made in U. S. A. Furnished with shunt. Size: 2-1/4. Range: 0-30 (0 center) .....P/N 10-14650 .........$178.95 0-60 (0 center) .................P/N 10-14655 ......... $177.95 0-80 (0 center) .................P/N 10-14660 ......... $178.95 0-100 (0 center) ................P/N 10-02788 .........$175.95
2-1/4 inch UMA Electronic Oil Temperature Gauge Case: Valox 420 Plastic Weight: 4.8 oz.
These rugged aircore gauges work with either thermocouple or thermister probes. Standard markings are black and white. 100-300 F, TSOd ...... P/N 10-02443 .....$188.95 SENDER NOT INCLUDED
AMMETERS
These gauges are available for either thermocouple or thermistor probes. Standard markings are black and white.
P/N 10-02057
2-1/4, 100-300 F - compatable with VDO ..... P/N 10-02426 .... $131.95 2-1/4, 100-600 F - 90 sweep for use with thermocouple powered aircraft.................................................................. P/N 10-02429 .... $118.95 2-1/4, 100-600 F - 270 sweep for use with internal powered aircrat P/N 10-02057 .... $131.95 Type J CHT Probes 10mm Spark Plug Ring ................................... P/N 10-00960 ...... $61.25 12mm Spark Plug Ring ................................... P/N 10-00961 ...... $62.85 14mm Spark Plug Ring ................................... P/N 10-00962 ...... $62.75 18mm Spark Plug Ring ................................... P/N 10-00963 ...... $61.75 3/8-24 Bayonet w/snap .................................. P/N 10-00795 ...... $88.50
WUMA Ammeter shunt 30AMP, 60AMP, 80AMP, and 100AMP. Shunt 30AMP 1C1 ........P/N 10-02072 ...........$31.85 Shunt 60AMP 1C2 ........P/N 10-02073 ...........$31.85 Shunt 80 AMP 1C3 .......P/N 10-02352 ...........$31.25 Shunt 100AMP 1C4 ......P/N 10-02074 ...........$32.75
463
Turbine FlowTransducer
Electronic, Fuel/Air-box Differential Pressure gauges and senders are designed for the Rotax 914 engine but have other applications where differential pressures need to be measured. It eliminates having to calculate the fuel/air-box differential pressure by looking at two separate 2-1/4 inch UMA Fuel gauges and having two separate senders. Airbox Pressure 2-1/4 0-7 diff. PSI (U) Case: Valox 420 P/N 10-00979 ................................ $177.95 Plastic SENDER NOT INCLUDED Weight: 4.8 oz.
Description Part No. 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02392 Range/Sweep: E-F/270 Sender: (C) 0-5V 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02393 Range/Sweep: E-F/180| Sender: (C) 0-5V 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02394 Range/Sweep: E-F/270 Sender: (F) 240/30 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02395 Range/Sweep: E-F/180 Sender: (F) 240/30 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02396 Range/Sweep: E-F/180 Sender: (F) 0-30 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02397 Range/Sweep: E-F/270 Sender: (F) 0-90 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02398 Range/Sweep: E-F/180 Sender: (F) 0-90 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02399 Range/Sweep: E-F/270 Sender: (F) 78-6 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02401 Range/Sweep: E-F/180 Sender: (F) 78-6 ohms 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02410 Range/Sweep: E-F/ Sender: (C) 0-5V 2-1/4 inch UMA Electronic Fuel Quantity Indicator 10-02411 Range/Sweep: E-F/ Sender: (F) 240/30 ohms
Price $188.95 $188.95 $181.95 $188.95 $188.95 $188.95 $181.95 $188.95 $188.95 $111.95 $132.95
UMAs pressure senders offer high reliability and accuracy at an affordable cost. They use precision solid state sensors and are designed for rugged use in just about any environment. Description UMA Pressure Sender (U) UMA Pressure Sender (U) UMA Pressure Sender (U)(G)(D) 1/8-27 NPTF Connection(s) 1 Cable 5/8-18 Mounting Thread UMA Pressure Sender (U) UMA Pressure Sender (U) UMA Pressure Sender (U) UMA Pressure Sender (U) UMA Pressure Sender (U) UMA Pressure Sender T1EU35(G)(D) UMA Pressure Sender T1EU100(G)(D) UMA Precision Sender (A) UMA Ashcroft Precision Sender (A) UMA Ashcroft Precision Sender (A) UMA Ashcroft Precision Sender (A) 0-7 PSI 0-35 PSI 0-70 PSI 0-100 PSI 0-150 PSI 0-60 InHg Absolute 0-35 PSI 0-100 PSI 0-30 PSI 0-150 PSI 0-2000 PSI PSI 0-7 PSI Differential Part No. 10-00980 10-01057 10-01058 10-01059 10-01060 10-01061 10-01062 10-02646 10-02647 10-02418 10-00530 10-02420 Price $118.95 $112.95 $112.95 $112.95 $112.95 $112.95 $118.95 $151.95 $151.95 $175.95 $175.95 $175.95
TO PS BV
(U) All 1BX Temperature Probes contain a thermistor for temperatur sensing. 6 Lead Wires. (J) All 2B1X & 2B0X Temperature Probes use Type J Thermocouple. 6 Lead Wires.
(K) All 2B2X & 2B3X Temperature Probes use Type K Thermocouple. 6 Lead wires
UMA P/N 1B1 1B2 1B3 1B4 1B5F 1B6 1B7 1B8 1B10 1B11 2B10 2B12 2B14 2B18 2B01 2B02 2B20 2B21 2B30
Sizes Thread:1/8 NPT, 1/2 Hex Head Thread: 3/8-24, 5/8 Hex Head (Auto) Thread: 5/8-18, 7/8 Hex Head (Lyc.) Thread: 10mm x 1.5 Pitch (Rotax 912 & 914) Thread: 3/8-24, 2-1/4 OAT F Thread: 16mm x 1.5 Pitch Thread: 12mm x 1.5 Pitch Thread: 1/4-20 (Carb. Temp.) Thread: 1/4-28 Thread: 1/4-18 NPT 10mm Spark Plug Ring 12mm Spark Plug Ring 14mm Spark Plug Ring 18mm Spark Plug Ring Bayonet Type: 1/8 NPT Bayonet Type: 3/8-24, w/snap Clamp Size: 1-5/8 - 2-1/2 Length: 1 Tip Clamp Size: 1 - 2 Length: 1 Tip Clamp Size: 8mm, Bayonet Length: (Rotax)
Our P/N 10-00968 10-00969 10-00418 10-00973 10-02374 10-02375 10-02376 10-01156 10-02377 10-02378 10-00960 10-00961 10-00962 10-00963 10-02448 10-00795 10-04791 10-00966 10-00967
Price $62.85 $62.75 $61.25 $61.25 $73.75 $61.25 $61.25 $62.85 $61.25 $61.25 $61.25 $62.85 $62.75 $61.75 $85.70 $88.50 $73.75 $73.75 $73.75
464
AP LG EP CS IN EL AV
OIL PRESSURE
Description Oil Pressure Gauge 0-80psi Oil Pressure Gauge 0-130psi
FUEL FLOW
Description Fuel Flow 0-8 6PH Fuel Flow 0-20 6PH Fuel Flow 0-30 6PH
MOUNTING INFORMATION
weight: 4.2 oz. 1.50 square
FUEL QUANTITY
Description Fuel Qty. Ind. (Float 240-30) Fuel Qty. Ind. (Cap. 5v) Sender (Float type 240-30 ohms) Sender (Capacitance 0-5V)
OIL TEMPERATURE
Description Oil Temp. Gauge 100-300F 1-1/4 inch VDO - TSOd Electronic Temperature Gauges 100-300 deg F Oil Temp. Probe 3/8-24 (Automotive) Oil Temp. Probe 5/8-18 (Lyc./Cont.) Oil Temp. Probe 10mm (Rotax 912/914)
AMMETER
Description Ammeter 30 Shunt incl. Ammeter 100 Shunt incl. Ammeter +60 Ammeter +80
FUEL PRESSURE
Description Fuel Pressure Gauge 15psi Fuel Pressure Gauge 30psi Fuel Pressure Gauge 0-80 psi
WATER PRESSURE
Description Water Press. Gauge 0-15psi Water Press. Gauge 0-30psi
TO PS
2.75
WATER TEMPERATURE
Description Water Temp. Gauge 100-300F Description OAT (-25) -40C OAT (-10) -110F
VOLTMETER
Description Voltmeter 18-36V Voltmeter 9-17V
FLAP INDICATOR
Description Flap Position Indicator 0-30 Flap Position Indicator 0-40 Flap Position Indicator up-full Flap Indicator Transducer
BV
MANIFOLD PRESSURE
Description 5-35 5-50 1.375
465
CM WP ME
UMA No. Size & Type 1 1/4 OIL PRESS 1 1/4 OIL PRESS 1 1/4 OIL PRESS 1 1/4 OIL PRESS 1 1/4 OIL PRESS 1 1/4 OIL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 FUEL PRESS 1 1/4 WATER PRESS 1 1/4 WATER PRESS 1 1/4 WATER PRESS 1 1/4 WATER PRESS 1 1/4 HYDRAULIC PRESS 1 1/4 GEARBOX OIL PRESS 1 1/4 OIL TEMP 1 1/4 OIL TEMP 1 1/4 WATER TEMP 1 1/4 WATER TEMP 1 1/4 CHT 1 1/4 EGT 1 1/4 CARB. TEMP 1 1/4 GEARBOX TEMP 1 1/4 TURBINE TEMP 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. 1 1/4 FUEL QTY IND. Range / Sender Sender Range 0-80 PSI (VDO) 0-130 PSI (VDO) 0-60 PSI (ASHCROFT) 0-100 PSI (ASHCROFT) 0-150 PSI (ASHCROFT) 0-10 BAR 0-15 PSI (VDO) 0-30 PSI (VDO) 0-80 PSI (VDO) 0-15 PSI (ASHCROFT) 0-30 PSI (ASHCROFT) 0-60 PSI (ASHCROFT) 0-100 PSI (ASHCROFT) 0-150 PSI (ASHCROFT) 0-15 PSI (VDO) 0-30 PSI (VDO) 0-15 PSI (ASHCROFT) 0-30 PSI (ASHCROFT) 0-2000 PSI (ASHCROFT) 0-100 PSI (ASHCROFT) 40-150 0C 100-300 0F 40-150 0C 100-300 0F 50-300 0C 100-900 0C -60-120 0F 100-300 0F 0-1000 0C EMPTY TO FULL (cap 5V) EMPTY TO FULL (cap 5V) EMPTY TO FULL (float 240-30 ohms) EMPTY TO FULL (float 0-30 ohms) EMPTY TO FULL (float 0-90 ohms) EMPTY TO FULL (float 78-6 ohms) EMPTY TO FULL (float 10-180 ohms) EMPTY TO FULL (float 240-30 ohms) EMPTY TO FULL (float 0-30 ohms) EMPTY TO FULL (float 0-90 ohms) EMPTY TO FULL (float 78-6 ohms) EMPTY TO FULL (float 10-180 ohms) Markings & Sweep B&W B&W B&W B&W B&W B&W B&W B&W B&W B&W B&W B&W B&W GA 59-115, RR@ 59-115 B&W B&W B&W B&W B&W B&W B&W B&W B&W B&W B & W (Thermocouple) B & W (Thermocouple) B&W B&W B & W, 5V INPUT B & W (2700) B & W (1800) B & W (2700) B & W (2700) B & W (2700) B & W (2700) B & W (2700) B & W (1800) B & W (1800) B & W (1800) B & W (1800) B & W (1800) Part No. 10-00037 10-00533 10-00534 10-00535 10-00536 10-00537 10-00538 10-00539 10-00540 10-00541 10-00542 10-00543 10-00544 10-00545 10-00546 10-00547 10-00548 10-00549 10-00550 10-00551 10-00555 10-00556 10-00557 10-00558 10-00561 10-00562 10-04670 10-00564 10-00565 10-00566 10-00567 10-00568 10-00569 10-00570 10-00571 10-00572 10-00573 10-00574 10-00575 10-00576 10-00577 Price $164.95 $188.95 $187.95 $187.95 $186.95 $188.95 $188.95 $188.95 $187.95 $188.95 $188.95 $187.95 $187.95 $186.95 $188.95 $186.95 $188.95 $188.95 $188.95 $157.95 $188.95 $188.95 $188.95 $188.95 $188.95 $188.95 $188.95 $148.95 $157.95 $181.95 $188.95 $181.95 $188.95 $188.95 $188.95 $188.95 $188.95 $181.95 $188.95 $188.95 $188.95
HA AP LG EP CS IN EL AV TO PS BV
TO4 113V 080P 000 TO4 113V 130P 000 TO4 1135 060P 000 TO4 1135 100P 000 TO4 1135 150P 000 TO4 1135 010B 000 TO4 112V 015P 000 TO4 112V 030P 000 TO4 112V 080P 000 TO4 1125 015P 000 TO4 1125 030P 000 TO4 1125 060B 000 TO4 1125 100P 000 TO4 1125 150B 000 TO4 115V 015P 000 TO4 115V 030P 000 TO4 1155 015P 000 TO4 1155 030P 000 TO4 1145 2K0P 000 TO4 11A5 100P 000 T12 113U 150C 000 T12 113U 300F 000 T12 115U 150C 000 T12 115U 300F 000 T12 116J 530C 000 T12 117K 1K7F 000 T12 118U 120F 000 T12 11AU 300F 000 T12 11T5 1K0C 000 T18 1125 1C10 000 T18 1125 2C10 000 T18 112F 1F10 000 T18 112F 1F20 000 T18 112F 1F30 000 T18 112F 1F40 000 T18 112F 1F50 000 T18 112F 2F10 000 T18 112F 2F20 000 T18 112F 2F30 000 T18 112F 2F40 000 T18 112F 2F50 000
Ammeters are not TSOd 15 11S0 P30A 000 15 11S0 P60A 000 15 11S0 P80A 000 15 11S0 P1CA 000 1 1/4 AMMETER (2700) (w/shunt) 1 1/4 AMMETER (2700) (w/shunt) 1 1/4 AMMETER (2700) (w/shunt) 1 1/4 AMMETER (2700) (w/shunt) -30 to 30 A -60 to 60 A -80 to 80 A -100 to 100A
NOTE:
These Ammeters are NOT TSOd
Senders sold separately, optional internal lighting available, Range Markings available at additional cost.
466
CM WP ME HA AP
RCA40A-6 - 2 Prop Tachometer, Green Arc from 0 RPM to Red Line at 1700 RPM
RCA40AB-07
LG
Model No. 12-5000-1 12-5000-2 12-5000-3 12-5000-4 12-5000-5 Range (Amps) 0 to 16 VDC 0 to 30 VDC 0 to 60 VDC 0 to 100 VDC 0 to 200 VDC Part No. 10-02567 10-02568 10-02569 10-02570 10-02571 Price $758.00 $763.00 $758.00 $758.00 $758.00 RCA41A-07 Many years of experience were drawn upon in the design and development of these tachometers. Only the best time tested and field proven features were used. These instruments use a three phase alternating current synchronous motor powered by a remote tach generator. The simplicity of design results in a twofold gain: increased reliability and ease of overhaul. Dimensions: 2 diameter x 5. Weight: .7 lbs. Power: Tach Generator, MIL-G-9398. Connector: MS3106A-14S-5S Description 2 Prop Tachometer 2 Prop Tachomerter 2 Prop Tachometer 2 Prop Tachometer 2 Prop Tachometer Lit 2 Prop Tachometer Lit 2 Prop Tachometer Lit 2 Percent Tachometer 2 Percent Tachometer 2 Percent Tachometer 2 Percent Tachometer 2 Percent Tachometer Lit 2 Percent Tachometer Lit 2 Percent Tachometer Lit 33-2025 $156.95 Model No. RCA40A-06 RCA40A-07 RCA40A-09 RCA40A-10 RCA40AB-06 RCA40AB-07 RCA40AB-09 RCA41A-06 RCA41A-07 RCA41A-08 RCA41A-09 RCA41AB-06 RCA41AB-07 RCA41AB-09 Part No. 10-02616 10-02617 10-02618 10-03431 10-02619 10-02621 10-02622 10-02623 10-02589 10-03433 10-02588 10-02624 10-02626 10-02627 Price $857.00 $856.00 $857.00 $857.00 $956.00 $956.00 $956.00 $857.00 $857.00 $857.00 $843.00 $956.00 $956.00 $956.00 RCA41A-07 - 2 Percent Tachometer, Type MU-1 (MIL 25623A)
EP CS IN EL AV TO PS BV
For use with ammeters and voltammeters with a 50 MV rating. Dimensions: 2 x 1-1/4 x 1-5/8 Weight: .5 lbs approx. Description Shunt - 30 amps Shunt - 50 amps Shunt - 55 amps Shunt - 60 amps Shunt - 75 amps Shunt - 80 amps Shunt - 100 amps Shunt - 120 amps Shunt - 125 amps Shunt - 150 amps Model No. 12-902-1 12-902-2 12-902-8 12-902-3 12-902-4 12-902-6 12-902-11 12-902-9 12-902-5 12-902-10 Part No. 10-02574 10-02575 10-02576 10-02577 10-02578 10-02579 10-02580 10-02581 10-02582 10-02583 Price $112.95 $112.95 $112.95 $112.95 $112.95 $112.95 $112.95 $112.95 $112.95 $112.95
An amber light will come on at the moment of low voltage condition which will inform the pilot of attention needed to the alternator, generator, or voltage regulator. Any of these conditions allowed to continue will result in a weak or completely discharged battery condition and loss of radio and electrical equipment. Indicator light features a built in dimmer and press to test with amber lens. Lights will trigger at 13 volts for 14V systems and 25 volts for 28V system. Accuracy, plus or minus 0.2 volts. Size: 1/2 Dia. 3 Depth required behind panel. Weight: .2 lbs., Power: less than 1/10 amp. Fuse supplied with kit. Model No. 33-2013A 33-2013 33-2025A 33-2025 Description 14 Volt, Red Lens Low Voltage Warning System 14 Volt, Amber Lens with Dimmer Low Voltage Warning System 28 Volt, Red Lens Low Voltage Warning System 28 Volt, Amber Lens with Dimmer Low Voltage Warning System Part No. Price
10-02573 $154.50
467
CM
P/N 15000 P/N 15001 P/N 15006 P/N 15007
WP ME HA AP LG EP CS IN EL AV TO PS BV
The Quartz + series of hour meters provide performance and reliability. Features include a highly reliable drive mechanism and odometer gear train combined with the accuracy of quartz crystal timing. Accurate to +/0.02% from -40 to 185F. Total digital quartz readout is 9999.9 hours. Easy-to-read white numerals on black face dials. Sealed against dirt and moisture. Meets requirements of spec. MIL-L-3971B. Power: 10 32 V DC. Models 85094, 85001 and 85011 read Total Hours. Model 85012 reads Flight Hours. Hobbs Hour Meter 85094 +...................P/N 15000 ..................... $26.75 Hobbs Hour Meter 85001 +...................P/N 15001 ..................... $66.85 Hobbs Hour Meter 85011 +...................P/N 15006 ..................... $76.85 Hobbs Hour Meter 85012 +...................P/N 15007 ..................... $67.85 PRESSURE SWITCH FOR HOBBS HOUR METERS Normally open. Closes at 4 PSI. Single circuit with 2 insulated terminals. Switch has silver contacts enclosed in weatherproof case. 1/8 male pipe thread connection. P/N 10-00813 ............$31.85 Water Compatible Pressure Switch for Rotax engines. P/N 10-00326 ....................$23.75 TEE CONNECTORS - For pressure switches with 1/8 male pipe threads. For 1/4 O.D oil pressure lines. P/N 10-13300 ....................$31.95 For pressure switches with 1/8 male pipe threads. For 1/4 O.D oil pressure lines. .............. P/N 10-04846 ....................... $9.85
Features 6-digits with an hour glass as a running indicator - operates only when engine is vibrating. Install anywhere with no wired connection or power source to operate. Internal battery supplies all the necessary power for the gauge to operate for years of service. Total operating hours are always shown on the LCD display. Compact tamper-proof meter is sealed against the environment to provide years of service. ENM Hourmeter DC Power ........................ P/N ENMDC ..............$37.50 ENM Hourmeter AC Power ........................ P/N ENMAC ..............$69.75
Now both a digital tachometer and an hourmeter in the same low cost and small size package! No power required yet there is a large 7 segment LCD display. Solid state electronics with quartz crystal technology make this instrument highly reliable. Easy to install - just wrap the attached wire around your spark plug cable. The case is completely sealed, it operates in a wide temperature range and the service interval is programmable. P/N TLPT14 ..............$46.85
All solid state. Mount from front or back of panel in 1 3/8 by 7/8 hole. Requires 12 VDC. P/N CUR701 .............$35.00
CURTIS HOURMETER
873 871 876 Mounts in 3-Hole Flange Bracket Mount in Standard 2-1/4 Mounting 2.54 Bolt 2-1/32 - 2-1/8 Instr. Hole Circle 1.45 Dia. Holes Panel Hole Standard equipment in most production aircraft. Operate on any DC voltage from 4-40V. Recommended for use on aircraft because they start or stop instantly when power is applied or removed. Furnished with mounting hardware. If meter is connected improperly it will not operate but meter will not be damaged. The running indicator indexes every 6 seconds. Model 871 ..............12/24V ............. P/N 56456-3 .......................$65.50 Model 873 ..............12/24V ............. P/N 56457-3 .......................$68.90 Model 876 ................ 12V ............... P/N 56458-4 .......................$71.85 RPM reading adjustable from 1 spark per 2 revolutions to 8 sparks per revolution. One TINY-TACH now works for most gas engines. RPM display from 1 to 19,000. RPM update time 1/2 second. Hour meter records total actual running time on your engine. Job timer can be reset to record run time for record keeping. Coax cable transmits signal without EMF interference. 1 Antenna cable winds around your spark plug wire to give you the RPM reading clean and simple to attach. Signal strength can be controlled by the antenna wire. Standard cable length is 6 feet. This unit is potted to prevent damage from moisture and vibration. Lithium battery life 5+ years, not replaceable. One year warranty. TT2A Standard Model ................................P/N 10-04182 .......... $48.50 For Diesel Engines - 6mm transducer .......P/N 10-04016 .......... $95.00 For Diesel Engines - 1/4 inch transducer ..P/N 10-04017 .......... $95.00
These new manufacture voltmeters offer accuracy, rugged construction, and contemporary styling. Made in USA. 2 1/4 Range: 9-16V ....................P/N 10-14620 ......... $131.95 20-32V ..................P/N 10-02064 ......... $131.95
VOLTMETERS
This tiny and portable RPM meter and hour meter unit is chip controlled, fully programmable, and is suitable for both two and four stroke engines: one product fits all engines. It keeps in memory the max RPM and the time the engine has been running: both values are resettable. Its two small batteries last for years before needing to be replaced. A strong velcro for fixing is included. Features: * Velcro set for attaching the RPM-H * 2m cable * Batteries Included * One product fits all engines in the market thanks to programmable chip * Battery can be replaced, virtually is a life long product * it registers max RPM of the life of the engine, which are resettable. P/N 10-03573..........................$98.95
The Visual Instruments Flap Indicator system provides a means for owners of older aircraft to upgrade their troublesome indicators to a modern, more reliable design. The system includes a new transmitter, a modern digital display, and all parts necessary to perform the upgrade. The new display incorporates a color LED bar graph. The appearance is similar to flap indications shown on modern glass cockpits. Positions of more than 10 flap are indicated in a different color. This allows for easy identification during an emergency procedure such as a balked landing (go-around). The LEDs are very viewable from a wide angle. This is particularly useful since the indicator on many Cessna models is located on the right side of the panel. The display automatically adjusts to the ambient light for IFR or night operation. The Flap Indicator system includes all necessary parts and typically takes a mechanic approximately 2 hours to install. 5 year factory warranty. STCd for installation on early model Cessna 172s, 182s, 205s, 206s, & 210s. P/N 10-00240 .........................$495.00
468
INSTRUMENTS
INSTRUMENT MOUNTING PODS
This quality manufacture outside air temperature gauge features a moving coil meter movement housed in a 2 diameter case. Operated by MS28034-2 type resistance bulb. Size: 2-3/8 x 2-3/8 x 2-1/4. Wt. 1 lb. Power: 14 or 28 VDC. Range -45C/-50 to 120C. P/N 29-3003-14 ..... $498.95 P/N 29-3003-28 ..... $375.95 Connector: ..............P/N 11-02023 ............ $7.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
An economical, high-quality, easy-to-install solution to your instrument mounting problems. Made of vacuum-molded white and black ABS plastic with attractive black matte ABS faces. The white pod may be easily spray-painted with acrylic enamel to match your aircraft. Twopiece mounting brackets fit snugly around 1 tubing, secured with screws provided. Available for 2, 3, 4 or 5 instruments with the face precut and mounting holes drilled for either 2-1/4 or 2 instruments. Blank face plates also available. May be used horizontal or vertically. When you order, specify either 2-1/4or 2 instruments holes or blank face plate. Instruments not included. P/N 10-01513 10-01517 10-01521 10-01525 10-01529 10-01530 10-01531 10-01533 10-01534 10-01535 10-01536 10-01537 Instr Instr. 2-1/4 Color Price P/N 2 Hole Hole 2 White $42.25 10-01538 2 3 White $57.25 10-01539 3 4 White $53.25 10-01540 4 5 White $58.50 10-01541 5 2 Black $43.50 Blank 3 Black $54.25 10-01542 2 4 Black $54.25 10-01543 3 5 Black $66.50 10-01544 4 2 Hole 10-01545 5 2 3 4 5 White White White White $42.25 $60.25 $54.25 $48.75 10-01546 10-01547 10-01548 10-01549 2 3 4 5 Color Black Black Black Black Price $42.25 $54.25 $54.25 $66.50
This quality new manufacture cabin air temperature gauge features a moving coil meter movement housed in a 2 inch diameter case. Operated by MS28034-2 type resistance bulb. Size: 2-3/8 x 2-3/8 x 2-1/4. Wt. 1 lb. Power: 14 or 28 VDC. 14V 29-4000 .........29-4000-14 ............ $233.95 28V 29-4000 .........10-03146 ............... $249.95 MS28034-2 Resistance Bulb .......................MS28034-2 ............ $164.95
White $42.25 White $60.25 White $39.95 White $60.25 Black Black Black Black $39.95 $54.25 $54.25 $66.50 Model No. / Part No. 18-1000-1 P/N 10-03435 18-1000-2 P/N 10-03436 18-1000-3 P/N 10-03437 18-1000-4 P/N 10-03438
Consists of three independent gages contained within a standard 3 diameter case. Oil temperature and cylinder head temperature gages are moving coil meter movement operated by MS28034-1 and AN5546-1 resistance bulbs respectively. Connection for the temperature gage is by cannon type connector: P/N MS3106A-14S-2S. FAA TSO Approved C47. Description Price
SHOCK MOUNTS
For vibration and shock proofing on instruments and radios.
28 VDC Oil Temp. 50-250F, Oil Press. 0-200 $649.00 PSI, Cylinder head temperature 100 to 500F 28 VDC Oil Temp. 20 to 120F, Oil Press. 0 to $649.95 200 PSI, Cylinder head temp. 50 to 250F 14 VDC Oil Temp 50-250F, Oil Press. 0-200 $649.95 PSI, Cylinder head temp. 100-500F. 14VDC Oil Temp 20 to 120F, Oil Press 0 $649.95 200 PSI, Cylinder head temp. 50 to 250F 18-1002 SERIES - This gage consists of three moving coil meter movements within a 3 diame-ter case. Oil temperature is sensed by an MS28034-1 resistance bulb and cyl-inder head temperature is sensed by an AN55461 resistance bulb. Oil pres-sure is sensed by a VDO Transducer. Connection is made by a single cannon type connector: Part Number MS3106A-14S-6S.
LORD J-14290-4 INSTRUMENT SHOCK MOUNT 5 lb rating Metal mounting plate .144 dia. base
hole (screw size: #6) .195 dia. center hole (screw size #10) Aircraft: Cessna 182, 182A-182N P/N 08-00381 ............$27.85
Model No. / Description Price Part No. 18-1002-1 Oil Temp 50 - 250F, Oil Press. 0 - 120psi, $649.95 P/N 10-03439 Cylinder temp. 0 - 500F Oil Temp 50 - 250F, Green Arc 100 - 200F, Red line at 249F, Oil Press. 0 18-1002-5 120psi, Red line 10psi & 100psi, Yellow Arc $998.00 P/N 10-03440 10psi - 30psi, Green Arc 30psi - 60psi, Yellow arc 60psi - 100psi, Cylinder Temp 0- 500F, Green Arc 220 - 420F, Red Line 460F
The RTC-2 is a 2.25 aviation Real Time Clock featuring a two time zone system, stopwatch, countdown timer, alarm and OAT (Outside Air Temperature) display. It is primarily intended to show UTC time (also known as Greenwich Mean Time, GMT or Zulu time) together with a local time to facilitate ordinary ATC time reporting. P/N 11-06443 ........ $225.00
Mounts through 3/8 dia. hole in windshield or cowling. Convenient scale reads in both Centigrade and Fahrenheit. Stem length is 4. Face diameter 2-1/8. Sunproof crystal. P/N 10-15500 ...........$82.65
469
CLOCKS TIMERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part no. 10-15508 Model LC-2
A fine quality instrument to satisfy all cockpit clock/ timer needs. 12 or 24 hour clock, 24 hour elapsed timer with time-out or hold feature, month and date. Will operate on internal battery for 2 years or can be connected to electrical system. 12 or 28V DC operation. Does not include internal battery.
Description Panel Mount Aircraft Powered 14/28V Price $334.95 $995.00 $825.00
10-15512 LC-2A-5 King Air, 28 volts 10-15513 LC-2A-6 Beechcraft 28V Clock
Displays local and Zulu time. May be set to display in a 12 or 24-hr format. A 10-year lithium battery keeps the clock running even if the aircraft battery is removed. Displays an Up Timer, that will start running when the engine is started. Acts as an automatic Flight Timer. The Up Timer may be started, stopped or reset. A Recurring Alarm may be set to alert you at appropriate time intervals. Displays a Down Timer. Displays an Engine Timer. Acts as a Hobbs Meter. When the engine starts, the Engine Timer will run. Specifications: 2-1/4 mount. 3.65 Depth. 10 Oz. Unit. Viewable in direct sunlight. Backlit for night operation. Operates from 7.5 to 35 volts at .3 amps. P/N 10-01612 ................. $289.00
The LC-6 is a 5-function, liquid crystal display, aircraft quartz chronometer. All functions contained in a single Large Scale Integrated Circuit (LSI) bonded directly to a printed circuit board. Features 6-digit local time or GMT stopwatch, 100-hour remote-activation timer, presettable down-counter. Unit mounts into standard 2.25 panel cutout, back-lit, may be wired into aircraft instrument panel lighting system (14 or 28V). P/N 10-15503 ........................... $619.95
Tachometer: Monitors both left and right ignition systems. Works with magnetos and electronic ignition. Warns when an ignition system has failed. Engine Hour Meter: Saves engine hours in "tach time" or actual time. Flight Timer: Automatically records flight Time. Features: Large and easy to read digits. Extreme operating temperature display. Soft orange backlight with automatic brightness. 2-1/4" panel mounted. Weighs 2.6oz. Includes pre-wired connector. 12-28 volt compatible P/N 10-03898 ...................$159.95
Reads your Altitude Encoder and displays your current altitude as seen by ATC. Display indicates when your current altitude is above or below your Programmed Target Altitude. A Level off Alarm occurs as you approach your Programmed Target Altitude. Displays Density Altitude based on your current OAT reading. Degrees F and degrees C. A Timer may be set as an UP or Down counting Timer. A Recurring Alarm may be set to alert you at appropriate time intervals. Displays Local and Zulu Time. The Local Clock may be set to display in a 12 or 24-hr format. Meets FAA requirements for a clock. Specifications: 2-1/4 mount. 3.65 Depth. 10 Oz. Unit. Viewable in direct sunlight. Backlit for night operation. Operates from 7.5 to 35 volts at .3 amps. P/N ASC-5 ...........$483.00
Includes a feature-rich aircraft chronograph with constant viewable Outside Air Temperature - all in one 2 1/4 mount instrument. For experimental aircraft. Programmable Features - CT1 allows you to configure the instrument just the way you need it. All clock functions are available in both 12 and 24 hour format with instant indication of the current operating format. Local time is calculated as an offset from UTC. Just set your offset. Programmable to 23 hrs/30 min. either side of the date line. Other features: MultiFunction Flight Timer Down Timer Outside Air Temperature Hi-Tech Temperature Sensor TSO & STC Certificate pending (Oct 2005) Dimensions: 2.45 X 2.45 X 1.6 Weight: 8oz. Power: 6V-40VDC P/N 10-01719 ........ $424.95
Designed for accuracy, this precision clock is manufactured to meet rugged aircraft environmental standards. High-quality, solid state quartz movement. Comes with a factory one year limited warranty. Features: FAA/PMA approved. Precision quartz movement. Transient and reverse polarity protected. One year limited warranty. Continuously powered by aircraft battery. Low power consumption (3mA). Fits standard 2-1/4 panel hole Specifications: Dimensions: 2.5 x 2.5 x 3.2 inches max. Weight: 0.5 lbs.. Altitude: -1,000 to +55,000 feet. Mounting: Front or rear panel. Standard Quartz Electric Clock (unlit) ......... P/N 10-00459........ $227.95 Lighted Quartz Electric Clock (14V) ............ P/N 10-00460........ $259.95 Lighted Quartz Electric Clock (24V) ............ P/N 10-04615........ $268.95
These clocks are constructed for easy installation in a wide variety of aircraft. The rugged quartz movement is accurate within 2 seconds in 24 hours under normal operations and runs accurately in temperatures from -30180F. The clock kit includes a power harness, mounting screws and installation instructions. The clock features adjustable red elapsed time hands. P/N 10-22812 (12V) ..... $117.50 P/N 10-22824 (24V) ..... $117.50
Three clocks packed into one convenient, easy to use clock, providing the pilot with standard time, flight time and elapsed time. The bright red LCD display is easy to read day or night by adjusting brightness control. Regular time recorded in hours, minutes, and seconds. Four switches provide control and mode selection. Fits standard 2-1/4 instrument cutting hole. Includes Connector. ...................... P/N 10-00370...................... $239.95 Replacement Connector................ P/N 11-04970........................ $17.25
FAA PMA approved. Precision quartz movement. Compact 2 1/4-inch size fits standard panel cutout. Transient and reverse polarity protected. Original equipment for many major aircraft manufacturers Low power consumption (3 mA). Continuously powered by aircraft battery One year limited warranty. MD-90-1 8-32VDC ........ P/N 10-04771 .... $241.95 MD-90-L 14V Lighted .... P/N 10-00460 .... $259.95 MD-90-L 28V Lighted .... P/N 10-04615 .... $268.95 MD-90-L 14V Lighted .... P/N 10-00460 .... $259.95 MD-90-L 28V Lighted .... P/N 10-04615 .... $268.95
470
CLOCKS TIMERS
Battery-operated quartz aircraft clock reads out 12 or 24 hour formats in bright digital display, and has stopwatch & alarm features. Includes yoke attachment for mounting directly in front of the pilot, and the yoke clip holds charts, approach plates, etc. Uses one watch battery (included). 1yr warranty. A great clock & approach timer. Flight Clock (for Piper) .......P/N 13-31200 ...........$19.75 Flight Clock (for Cessna & all others) P/N 13-31210 ...........$18.95
Essential onboard aircraft, the Navitec chronograph is designed to make readings easier for pilots on both time and timing: Large 30 minutes chronometer eye zone. Red marks for standards STR 1 & 2 (sustained Turn Rates). Indexes and graduated rotating bezel in superluminova. Constructed in 316L stainless steel, T1 is equipped with Swiss movement ETA G10.211. Silver ......................P/N 10-04819 ........ $318.95
NAVITEC CHRONOGRAPH T1
CM WP ME HA AP LG EP CS IN EL AV
5 timers in one package! A combination of 12/24 hour digital chronometer, plus stopwatch, plus 3 countdown timers is about as close to timed maneuver perfection as a pilot can get. Large LCD digital readouts and large push-buttons make reading and operating easy. Memory stores each waypoint, tank change or approach count-down preset. When time is up, timer element flashes and counts up. The Flight Timer Amplifier is very compact and includes a speaker volume control & external output jack for audio annunciation. 5-in-1 w/ piezo alarm (No LED)...................P/N 13-01833 ......... $24.85 5-in-1 w/ red LED ........................................P/N 13-00095 .......... $47.75 5-in-1 w/ red LED & audio alarm .................P/N 13-00391 .......... $69.85 Flight Timer Amplifier ..................................P/N 13-01941 .......... $86.25
The jumbo LCD display on this electronic timer displays time in hours, minutes and seconds. Includes clock feature, electronic alarm, clip, stand, magnet and hanging hole for versatile use. AAA Battery included. P/N 17-00240 .......... $12.50
The Dual Channel Timer times 2 activities at once. One channel times hours, minutes, and seconds. Second channel times minutes and seconds. Dual LCD readout shows both times. Memory recalls previous time settings Includes clip, stand, magnet and hanging hole for ease of use 4L x 1W x 2.4H. AAA battery included. P/N 17-00241 .......... $14.25
ELECTRONIC STOPWATCH/TIMER
This easy-to-use stopwatch counts up to 60 minutes, then recycles automatically. As a timer, it counts down from 100 minutes in minutes and seconds. Features loud tone when timing period is complete, a large LCD digital display, and soft-touch buttons which are easy to set. Stands or hangs for convenience. 1.5V battery included. By Westbend. P/N 13-31380 ........$19.95
Features of this electronic timer include a continuous running clock that displays hours, minutes, seconds, and AM/PM mode, three timing channels that count to and from 100 hours, and three distinctive alarms. Additional Features: Memory recalls previous time setting. Times three activities at once. Alarm beeps for one minute and counts up to show elapsed time. Easy-to-read large LCD display. Clip, stand, magnet and hanging hole for versatile use. Specifications: One AAA battery included. 2.5 x 3 x 1. P/N 17-00239 .......... $18.00
Ergonomically designed and engineered for reliability, ease and convenience, the ASA Flight Timer should be considered essential equipment for all aviatiors. Features: Large LCD backlit display, multi-function clock and three simultaneous timer options. Exclusive digital notepad for squawk codes or frequencies, stores up to 12 approach times, audible and visual alarms. P/N 13-02357 $39.75
GMT, LT & ET ET Counter (UP/DOWN), Visual Alarm Model 800 AA Memory Battery (Optional) Input Voltage 11 to 28 Volts
External Output for Optional Audio Alarm (ET) NVIS (NVG) Option Green A Available for Beechcraft yoke Internal Lighting
TO PS BV
The Bodytronics Model 100 stopwatch strikes a great balance between price and performance. You will not find a better quality stopwatch at this price! ......................P/N 13-02954 .............$9.90
Description Part No. Price GMT, LT, & ET Digital Clock 5 Volt Lighting (800) 10-03323 $139.95 800-5V With Battery Holder (AA) 10-03305 $147.95 800-5V With Night Vision Lighting Green A 10-03324 $229.95 800-5V NVG With Memory Battery Holder (AA) 10-03325 $229.95 GMT, LT, & ET Digital Clock 14V Lighting (800) 10-04508 $139.95 800-14V With Memory Battery Holder (AA) 10-02050 $147.95 800-14V With Night Vision Lighting Green A 10-03330 $229.95 800-14V NVG With Memory Battery Holder (AA) 10-03331 $229.95 GMT, LT, & ET Digital Clock 28V Lighting(800) 10-24535-28 $139.95 800-28V With Memory Battery Holder (AA) 10-02051 $147.95 800-28V With Night Vision Lighting Green A 10-03335 $229.95 800-28V NVG With Memory Battery Holder (AA) 10-03336 $229.95 800-5V, Illuminated Buttons, Battery Holder 10-04730 $308.95 800-14V, Illuminated Buttons, Battery Holder 10-04574 $308.95 800-28V, Illuminated Buttons, Battery Holder 10-04575 $308.95 800-5V NVG, Illuminated Buttons, Battery Holder 10-04576 $463.95 800-14V NVG, Illuminated Buttons, Battery Holder 10-04577 $463.95 800-28V NVG, Illuminated Buttons, Battery Holder 10-04578 $463.95
471
DAVTRON INSTRUMENTS
DIGITAL CHRONOMETERS AND CLOCKS DIGITAL CHRONOMETERS AND CLOCKS
MB800 (BEECHCRAFT YOKE) MB800 Illuminated Buttons
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MODEL 803
UT, LT, FT, & ET FT & ET Visual Alarm External Output for Optional Audio Alarm(FT/ET) Aircraft Voltage OAT F & C (12Ft. Temperature Probe) Internal Lighting AA Memory Battery Input Voltage 11 to 28 Volts NVIS (NVG) Option Green A
Description Part No. Price UT, LT, FT, & ET Digital Clock 5V Lighting, Volt10-03304 $425.95 meter, OAT (F & C) UT, LT, FT, & ET Digital Clock 14V Lighting, 10-25520-14 $424.95 Voltmeter, OAT (F & C) UT, LT, FT, & ET Digital Clock 28V Lighting, 10-25520-28 $424.95 Voltmeter, OAT (F & C) 803-5V With Night Vision Lighting Green A 10-03342 $549.00 803-14V With Night Vision Lighting Green A 10-03343 $549.00 803-28V With Night Vision Lighting Green A 10-03344 $549.00 C307PS Temperature Probe 12Ft. Coax (Analog) 11-04603 $64.75 Audio Alarm Son-Alert 11-04610 $44.50
GMT, LT & ET ET Counter (UP/DOWN), Visual Alarm Input Voltage 11 to 28 Volts Description
MB800-5V MB800-14V MB800-28V MB800-5V MB800-14V MB800-28V MB800-5V MB800-14V MB800-28V MB800-5V MB800-14V MB800-28V MB800-5V MB800-14V MB800-28V MB800-5V Buttons MB800-14V Buttons MB800-28V Buttons
External Output for Optional Audio Alarm (ET) NVIS (NVG) Option Green A Available for Beechcraft yoke Internal Lighting Part No. Price
10-03341 10-02649 10-02651 10-04581 10-02906 10-03340 10-04582 10-04583 10-04584 10-04585 10-04586 10-04587 10-04588 10-04589 10-04590 10-04591 10-04592 10-04593 $139.95 $139.95 $139.95 $139.95 $139.95 $139.95 $236.95 $236.95 $237.95 $236.95 $235.95 $236.95 $308.95 $308.95 $308.95 $463.95 $463.95 $463.95
MODEL 800
GMT, LT & ET ET Counter (UP/DOWN), Visual Alarm Model 800 AA Memory Battery (Optional) Input Voltage 11 to 28 Volts
External Output for Optional Audio Alarm (ET) NVIS (NVG) Option Green A Available for Beechcraft yoke Internal Lighting
(Black) (Black) (Black) (Cream) (Cream) (Cream) (Black) NVG Green A (Black) NVG Green A (Black) NVG Green A (Cream) NVG Green A (Cream) NVG Green A (Cream) NVG Green A (Black) Illuminated Buttons (Black) Illuminated Buttons (Black) Illuminated Buttons (Black) NVG Green A, Illuminated (Black) NVG Green A, Illuminated (Black) NVG Green A, Illuminated
5 volt and 28 volt lighting units need at least 20 volts on main power input for clock to operate. For 14 volt systems, order a clock with 14 volt lighting.
Description Part No. Price GMT, LT, & ET Digital Clock 5 Volt Lighting (800) 10-03323 $139.95 800-5V With Battery Holder (AA) 10-03305 $147.95 800-5V With Night Vision Lighting Green A 10-03324 $229.95 800-5V NVG With Memory Battery Holder (AA) 10-03325 $229.95 GMT, LT, & ET Digital Clock 14V Lighting (800) 10-04508 $139.95 800-14V With Memory Battery Holder (AA) 10-02050 $147.95 800-14V With Night Vision Lighting Green A 10-03330 $229.95 800-14V NVG With Memory Battery Holder (AA) 10-03331 $229.95 GMT, LT, & ET Digital Clock 28V Lighting(800) 10-24535-28 $139.95 800-28V With Memory Battery Holder (AA) 10-02051 $147.95 800-28V With Night Vision Lighting Green A 10-03335 $229.95 800-28V NVG With Memory Battery Holder (AA) 10-03336 $229.95 800-5V, Illuminated Buttons, Battery Holder 10-04730 $308.95 800-14V, Illuminated Buttons, Battery Holder 10-04574 $308.95 800-28V, Illuminated Buttons, Battery Holder 10-04575 $308.95 800-5V NVG, Illuminated Buttons, Battery Holder 10-04576 $463.95 800-14V NVG, Illuminated Buttons, Battery Holder 10-04577 $463.95 800-28V NVG, Illuminated Buttons, Battery Holder 10-04578 $463.95
GMT, LT, FT, & ET FT & ET Visual Alarm External Output for Optional Audio Alarm(FT/ET) Bright Sunlight Readable displays Illuminated Displays
Model 850 N Size Memory Battery Model 877 AA Memory Battery Input Voltage 11 TO 28 Volts NVIS (NVG) Optional Green A (850 & 850-2) Price $416.95 $416.95 $553.00 $553.00 $615.00 $416.95 $416.95 $553.00 $615.00 $553.00 $416.95 $416.95 $553.00 $615.00 $553.00 $408.95 $408.95 $408.95 $408.95 $408.95 $408.95 $44.50
MODEL 811 Six-digit Display on all 3 Functions. Time Function (12 OR 24HR Selectable) FT & ET Bright Sunlight Readable Displays Memory Battery Included Input Voltage11 to 28 Volts NVIS (NVG) Option Green A Description Part No. Price LT, FT, & ET Clock 10-24550-14 $423.95 LT, FT, & ET Clock 811 With Gray Face11-05873 $423.95 plate Model 811 With Night Vision 10-03346 $559.00 Accessories / Replacement Parts 811 Dropping Resistor 811 Memory Battery Pack 811 Inverting Cable 811B Female Connector (Standard Cable) KW-505FDigital Display for Model 811B Part No. 11-04607 10-24560 11-04608 11-04609 11-04613 Price $2.95 $21.50 $23.75 $23.75 $44.75
Description Part No. GMT, LT, FT, & ET Clock 5V Lighting (850) 10-03310 850A-5V-With Gray Faceplate 10-03311 850-5V With Night Vision Compatibility (Green A) 10-03306 850A-5V-NVG With Gray Faceplate 10-03347 850-2-5V Rear Mount Night Vision (Green A) 10-04725 GMT, LT, FT, & ET Clock 14V Lighting (850) 10-03312 850A-14V With Gray Faceplate 10-03348 850-14V With Night Vision Compatibility (Green A) 10-03349 850-2-14V Rear Mount Night Vision(Green A) 10-04726 850A-14V-NVG With Gray Faceplate 10-03350 GMT, LT, FT, & ET Clock 28V Lighting (850) 10-03313 850A-28V With Gray Faceplate 10-03314 850-28V With Night Vision Compatibility (Green A) 10-03351 850-2-28V Rear Mount Night Vision(Green A) 10-04727 850A-28V-NVG With Gray Faceplate 10-03352 GMT, LT, FT, & ET Clock 5V Lighting (877) 10-03308 877A-5V With Gray Faceplate 10-03309 GMT, LT, FT, & ET Clock 14V Lighting (877) 10-24545-14 877A-14V With Gray Faceplate 11-05879 GMT, LT, FT, & ET Clock 28V Lighting (877) 10-24545-28 877A-28V With Gray Faceplate 11-05880 Audio Alarm Son-Alert 11-04610
472
DAVTRON INSTRUMENTS
MILITARY CHRONOMETER
MODEL M880 Military clock Two button control system Control switch has remote capability Sunlight readable displays N.V.G. Filter, Green A or BG7B Manual dimming of the display Full 6 digit display selectable, GMT, LT, ET Elasped time is count up or down Keep alive battery (2 year life) GMT full 6 digit hours/minutes/seconds Local Time, 24 hour, 4 digit
Part No. 11-08021 11-08022 Price $1,283.00 $1,095.00
CM WP ME HA AP LG EP CS
Description GMT, LT & ET Clock with night vision compatibility for military (BG7B) GMT, LT & ET Clock with night vision compatibility for military (Green A)
M307FCE OAT (F) & OAT (C) Voltage Bright Sunlight Readable Displays Input Voltage 11 TO 28 Volts. M307FCI Complete with 12 FT. Digital Probe. Description Part No. Price O.A.T. F & C (307FC) 10-08513 $200.95 O.A.T. F & C Cabin Air (307FCI) 11-05881 $200.95 O.A.T. F & C & Voltmeter (307FCE) 10-04552 $231.95 M307CD M307FD
M307FC
Description Celsius Differential Intercooler (307 CD) Fahrenheit Differential Intercooler (307 FD)
IN EL AV TO PS BV
473
3-1/8 Tach
In 1985 AC discontinued production of the popular RT series of mechanical tachometers. We now offer Mitchell tachometers to fill this void. These tachs feature exceptional accuracy and reliability. Mitchell tachs come with a 2-year factory warranty. Range on all models is 500 - 3500 RPM. Determine the correct part number for your application from the chart below, and order by our part no. from the charts shown here. All Mitchell tachs are FAA approved for certificated aircraft. $30.00 for custom range marks (specify ranges). $12.50 to set hours (specify hours) Mitchell P/N Our P/N Price Mitchell P/N Our P/N Price Mitchell P/N Our P/N Price D1-112-5025 10-24625 $177.00 D1-112-5034 10-24634 $177.00 D1-112-5023 10-24623 $177.00 D1-112-5032 10-24632 $233.95 D1-112-5029 10-24629 $209.00 D1-112-5122 10-24622 $177.00 D1-112-5028 10-24628 $177.00 D1-112-5024 10-24644 $177.00 D1-112-5030 10-24630 $209.00 D1-112-5124 10-24624 $219.00 2-1/4 Tach 2566 Cruise RPM Clockwise.................P/N 98480-2 ..................... 2-1/4 TACH (98480-2) ...............$209.00 2300 Cruise RPM Clockwise.................P/N 10-02046 ................... 2 1/4 TACH ................................$209.00
Stewart Warner No. AC Type Direction of Rotation Average Cruise RPM APPLICATION (REPLACEMENT FOR ORIGINAL EQUIPMENT INSTALLATIONS) Aero Commander: A9, A9A, A9B Aeronca: 15AC Sedan Alon: F1, F1A, A-2, A-4 & 415C. D, E, F, G (Including Ercoupe and Forney) Grumman/American: AA-1, AA1A, AA-5 Beech: C35, D35, E35, F35 Bellanca/Champion: 7EC, 7FC, 7GC, 7HC,7GCB, 7K, 7ECA, 7GCAA, 7GCBC, KCAB, 8KCAB, 260, 14-19, Viking 300, TurboViking Call: A2, A3, A4, A5, A9 Cessna: 120, 140, 170, 180, 182, 185 (with IO-470 eng.) 188, 336, 337 Culver: Cadet Lake Aircraft: C-1, C-2, L-4, LA-4SC, LA5 Mooney: Mark 20, 20A, 20D, 21, 200, 201, 202, 220 Piper: PA12, PA16, PA18, PA20, PA22, PA23, PA24, PA25PA28,PA30,PA32,PA39 Rockwell: 112, 114 Taylorcraft: 19,15A, 20, 20AG, Zephyr Temco: (Swift; GC-1, GA-1B) Beech: 35, A3S, B35, 35R Aeronca: Champion, Chief (early models) Piper: PA15, PA18, (W/TCM eng) Aeronca: Champion, Chief (late models) Champion: 7AC, 11AC, 7CCM Beech Bonanza Models: G35 thru V35, V35TC, 36, A36, 95, B95, B95A, D95AAll Musketeer Models. All Debonair Models Cessna:150,152, 172, 177, 185 & 188 (with IO-520 eng), 206, 207, 210, 310, 320 Helio: H250, H391, H392, H395 Navion: E, F, G Stits: SA9A, SA9B Bellanca/Champion: 7AC Stinson: 105,108 Aero Commander (Ayres Corp.) B1A, S2B, S2C, S2D, S2R Stearman: A75 (P & W eng.) Cessna; 175 Grumman; G164 Maule: M5/6/MX7-180, M5/6/7/MX7-235
Mitchell P/N
HA AP LG EP CS IN EL AV TO PS BV
55-35-7 D1-112-5023 P-551-AZ RT-7 Clockwise 2300
55-35-11
D1-112-5025
P-551-TA
RT-11
Clockwise
2566
*The specific tachometer listed is best suited if the installation has this approximate cruise rpm. Direction of rotation must be compatible with the previous tachometer that was used. For three decades, Superior Labs, Inc. (SLI) has supplied the aircraft OEM's with the finest quality and most reliable mechanical tachometers in the industry for new production aircraft and can be customized for a variety of aircraft applications. These are now available to the public as aftermarket tachometers. Specifications: Accuracy to within 25 RPM Range 0-3500 RPM Diameter 3-1/8" Length 3-1/2" Weight: 13 Oz. Two Years Warranty Most Models .............. $326.95
Custom made cables to exact specifications. Over-length cables can cause problems - order one that fits the installation. Select the proper length from the listing below, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Measure original cable from end of Ferrule to end of Ferrule when fully extended. Left lay is standard on all stock tach cables. Tach Cables have male ends only. 7/8-18 on one end and 5/8-18 on the other. No female ends. When ordering special length tach cables specify aircraft, engine make, model & dash number. Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16 per 360 degrees of bends. Tach Cable Assy Lengths to 4ft (Add $2.50/Ft. for Longer Lengths) 4 foot length ............ $48.95 Inner Cable Only Length is 4ft (Add $0.90/Ft. for Longer Lengths) P/N ......................... $26.00 TACH CABLE LENGTH
Various Aeronca Chief Aeronca Champ Bellanca Cruisair Cessna 120, 140 Cessna 175 Cessna 170,172,180 Mooney 10-02675 10-15700 10-15700 10-15800 10-15900 10-16000 10-16100 10-16200 22 29-1/2 29-1/2 26 29 25 37 36 Mooney Navion Piper J3, J5 Piper PA-22 Stinson Universal Use Various 10-00012 10-16400 10-16500 10-16600 10-16700 10-16900 10-16910 46 42 34 32 35 48 52
TACHOMETER CABLES
TACHOMETER CAP
474
TACHOMETERS
These tachs have high resolution and easy to read displays. The analog model has a 250 sweep which provides great resolution in both the 3500 & 7000 ranges. The digital model has a bright LED display. Separate power source required. All tachs require power from a 14 or 28V system. Installations are simple with instructions included. 3500 ANALOG TACH - Lyc./Continental (to replace mechanical tachs) Current: 37 milliamps Size: 2.25rnd. X 2.75deep. Magnetic pickup (6 ft. cable length) included with P/Ns 10-02141 and 10-02140 (T1A9). 6 ft. harness, sending unit, and .156 diameter tang adapter included with P/N 10-00083 (1A3-4). 0-3500 RPM, 4 cyl., Pulses:1 ......... P/N 10-02140 .$244.95 0-3500 RPM, 4 cyl., Pulses:2 ............................ P/N 10-00083 .$255.95 0-3500 RPM, 6 cyl............................................. P/N 10-02141 .$243.95 7000 ANALOG TACH - Current: 37 milliamps; Size: 2.25 round X 2.75 deep Rotax 19-519-206......................P/N 10-01854 .......$135.95 Rotax 912 ..................................P/N 10-01853 .......$135.95 Rotax 912/914 Lit ......................P/N 10-02053 .......$140.95
UMA has one of the most extensive line of tachometers available on todays market. They manufacture tachometers for a wide variety of engines and ignition systems used in ultralights, kit planes, and most general aviation aircraft.3-1/8 ....................................... P/N 10-02116 ...............$300.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
FOR 4 CYLINDER 3-1/8 0-3500 RPM (2 Pulse) .............. P/N 10-00120 ...............$328.95 Owners of Lycoming &d Continental powered airplanes now have an electronic, analog alternative to the old cable driven tachometer. The new UMA tach is certified to FAA TSO C49b standards for fixed wing aircraft. The system uses a tach sender mounted on the engine in place of the mechanical cable and is connected to the indicator with a single, 3-conductor cable. The 3 1/8 indicator utilizes a high torque pivot and jewel movement. The hour meter can be factory set to start at any desired RPM point. This unit gives the pilot the analog display that is easiest to scan and provides electronic accuracy and ease of installation. Custom dial markings in color & internal Electro-Luminescent lighting are available at extra cost. UMA manufactures a complete line of TSOd & non-TSOd gauges & instruments in the USA.
UMA Model# Range Dial Marking Part No. Price T19-801-10 0-3500 RPM Black & White 10-01221 $419.95 T19-801-11 0-3500 RPM Green Arc 500-2700 & Red Line 2700RPM(Lyc.) 10-01222 $412.95
These electronic tachometers use a 250 sweep meter movement to withstand high levels of vibration and register flight time accurately. The hour meter counts flight hours at RPM settings of 1800 & higher. Power: 12-28VDC. 2-year warranty.
Description Part no. Price 3-1/8 For Rotax 912 Engine B & W Markings, 10-00119 $233.95 built-in hourmeter 0-7000 RPM 3-1/8 For Rotax 912 Engine Color Markings 10-04223 $256.95 2-1/4 For Rotax 912 Engine Color Markings 10-01852 $161.95 3-1/8 *To replace Mechanical Tachometer 0-3500 RPM (readsCW or CCW; B&W Dial Only) 10-00120 $328.95 Furnished w/mechanical sender 3-1/8 *To replace Mechanical Tachometer 0-3500 RPM (Green Arc 500-2700 - Red 2700) Furnished w/ 10-00121 $349.95 mechanical sender * P/N 10-00120, 10-00121, 10-24870, & 10-24885 tachs eliminate the problems associated with mechanical tach cables, and the sending unit is a direct replacement for the tach cable. All models are analog style tachs with hour meters and can read RPM for either clockwise or counter-clockwise revolutions. Sender included. **Slick Mags Only
Range
3 1/8 Analog Tachometer with hourmeter. 4 Cylinder. 0-3500 RPM. Records engine time above a set RPM point. Standard set point is 1800 RPM. Engine Type: Continental/ Lycoming. TSOd Magnetic pickup for Slick or Bendix Magnetos (6 ft. cable length), alternative to p-lead connections. For Bendix Mags ......................................... P/N 10-04867........ $301.95 For Slick Mags............................................. P/N 10-04868........ $299.00
CLamps to ultralite tubing or motorcycle handle bar. Swivels 360 at any angle. Furnished with chrome plated installation hardware. SINGLE TACH (Tachometer requires no sender.)
Powered By Mag Mag CDI CDI CDI CDI Mag Mag Mag CDI CDI CDI Application 2/4 cyl. dist/mag & 1/2 VW 2 or 6 imp alt (Rotax, 2Si, Hirth, Arcticat) Jabiru 5 imp alt. Jabiru 6 imp alt. 2/4 cyl. dist/mag & 1/2 VW 3/6 cyl. dist/mag except GEO 2 or 6 imp alt (Rotax, 2Si, Hirth, Arcticat) Jabiru 5 imp alt. Jabiru 6 imp alt. RPM 0-5000 0-8000 0-5000 0-8000 0-3500 0-3500 0-3500 0-5000 0-3500 Head Type Round Round Round Round Round Round Square Square Square Part No. 10-02926 10-02928 10-02923 10-01302 10-00480 10-00481 10-01275 10-01294 2AT33-2 Price $109.85 $93.75 $83.00 $105.95 $99.50 $104.95 $121.95 $118.95 $89.95 $113.95 $108.95 $99.50
WESTACH TACHOMETERS
Provides diagnostic and performance information about the aircraft engine and ignition system not normally available with current mechanical or electrical/electronic tachometers. Eliminates problems resulting from inaccurate tachometers. STC approved for primary installation, not just secondary. Also incorporated into the P-1000 is a highly accurate engine hours clock, and an RPM Trap memory that recalls the highest RPM achieved by the engine. Both features are enabled with a touch of a button. The P-1000 is housed in a rugged, light-weight aluminum standard 3-1/8 inch MS style case. Installation is simple. Only four wires are connected, all of which are located under the panel! The P-1000 is the ideal aircraft tachometer, for upgrades or new designs, providing the conscientious pilot with high reliability, accurate RPM reading, and valuable diagnostic information. P/N 10-01592........ $609.00 Mechanical tachometers are notoriously inaccurate. The TruTach II Optical Digital Tachometer measures the true speed of your propeller from inside or outside the aircraft. Just point it at the propeller or rotor blades and TruTach II will directly display the rotational speed with a resolution of 1 RPM. No connection to aircraft systems is required and measurements may be made at any speed setting from 240 to 70000 RPM. Direct display is available for 2, 3, 4, and 5 blade propellers. Digital Signall Processing assures rock-solid display in single and multi-engine aircraft as well as helicopters. The compact 4-inch instrument weighs just 4 ounces and may be used with fast turning ultra-lights and kit plane propellers. Automatic shut-off turns the unit off if you forget. Includes an Impact resistant case and standard 9 volt battery providing 150 hours of operation. P/N 10-01021 ................ $194.95 2 Round Gauge Tachometer - Universal for single or dual ignition. EGT range: 700-1700F EGT probe (clamp type) Sender not included P/N 10-01628 .................. $85.50
0-8000 Square 2AT8A-2/6 0-3500 Square 10-00478 0-3500 Square 10-00479 Head RPM Part No. Type 3500 10-01305 Square 8000 10-01690 Square 3500 10-01689 Square 8000 3500 3500 3500 10-00829 Square 10-01691 Round 10-01693 Round 10-01692 Round Round
SQUARE
ROUND
Magneto 2/4 cyl. dist/mag & 1/2 VW Magneto 2 or 6 imp alt Coil Ignition (Rotax, 2Si, Hirth, Coil Ignition Arcticat) Magneto 2/4 cyl. dist/mag & 1/2 VW Magneto 2 or 6 imp alt Coil Ignition (Rotax, 2Si, Hirth, Coil Ignition Arcticat)
8000 10-01694
This tachometer is driven with power supplied by a transducer on the engine tach drive. Range 0-3500 RPM. Wt. 6 oz. Includes Gauge, sender, and tang. Complete kit .......P/N 10-00805 ...... $185.95 Sender only ........P/N 10-02084 ........ $67.75 Tang only ..........P/N 444-2 ................ $5.75
KY3GA3-1/2A - 500-3,500 RPM with hourmeter kit, 3-1/8 sq., 1/2 to 1 ratio. adjustable, with 303 DGT sender, 444-2 tang, 208-SS-SS cable. PN 10-02644 ...........$218.00 K3GA3-1/2A - Tachomter 500-3,500 RPM kit, 3-1/8 square, 1/2 to 1 ratio. adjustable with 303DGT sender, 444-2 tang, 208-SS-SS cable. Does not come with a sender. PN 10-02643 ......$122.95
Mitchell 2-1/4 Inch Mechanical Recording. FAA-TSO Approved. D1-112-5240 Special-Rotax 912 P/N 10-02744 ......................... $239.95
1A3-4
Unit 1A3-4 Includes: Sending Unit, and .156 dia. tang adapter. P/N 10-01706 ......................... $110.95 T1A9 Magnetic pickup for Slick or Bendix Magnetos (6 ft. cable lengths) Slick ..........P/N 10-02432 .....$86.25 Bendix .......P/N 10-02433 .....$86.25 T1A9
475
Alcors probe (thermocouples) reliability is legendary in the aviation community, designed to give years of dependable and accurate service.
GROUNDED THERMOCOUPLES
EGT Clamp Type (86255) DESCRIPTION EGT Clamp Type Probe min/ max dia.-1.5to 3.25) 86255 (Yellow/Red, Chrome/ EGT Screw-In Type (86240) Alumel) with Weld Boss (28113) EGT Screw-In Probe, fitting 86240 dims: 7/16 x 20 threads (Yellow/Red) less boss EGT Screw-In Probe, fitting EGT Screw-In Type (86245) (Reverse Stagger Leads) dims- 7/16 x 20 threads 86245 (Yellow/Red, reverse stagger with Weld Boss (28113) leads) less boss 28113 Weld Boss CHT Bayonet Probe (Black/ CHT Bayonet Type (86251) 86251 and Adapter (28202) Yellow, Iron/Constantan) AN5541-1 28202 CHT Bayonet Probe Adapter CHT Gasket Type (86202) CHT Gasket Style Thermocouple. Type: J Black and Yellow. Grounded 86202 Style: Gasket. Size: 18 mm. EGT/CHT Leads Resistance: .13 + .16 - .05 . Weight: 0.12 lbs. IMPORTANT! EGT systems & components with red/brown color codes are not compatible with systems & components using red/yellow codes. ALCOR
3-1/8 GAUGES
Alcor Systems are FAA Approved and the grounded probes have a 5Yr factory warranty, the ungrounded probes have a 1yr factory warranty, and the instruments have a 3yr factory warranty.
EGT Internal light 24V Type K EGT Type K Fahrenheit red and yellow CHT Type J, Fahrenheit black & yellow EGT Type K, Fahrenheit (Green Arc) EGT Type K,Fahrenheit (No Green Arc) CHT Type J, Celsius Black & Yellow EGT 240 Lead Type K, Fahrenheit (Green Arc) TIT/TIT Type K, Fahrenheit Red & Yellow EGT/EGT Type K Red & Yellow EGT/CHT Type K & J, Fahrenheit CHT/CHT Type J, Fahrenheit EGT Type E Fahrenheit Red and Brown. Designed for twin engine aircraft. EGT/EGT 24V Type K. Designed for twin engine aircraft. EGT/EGT Type K CHT/EGT Type J & K, Fahrenheit CHT/CHT Type J Farenheit TIT/TIT Type K, Fahrenheit switch Syringe Assembly TCP 5-Gallon Can TCP 55-Gallon Drum TCP Quart w/Perm. Draw Tube Model Model Model Model N, Screw-In (1/4 NPT) H, Screw-In (1/4 NPT) J1, Screw-In (7/16-20) K, Screw-In (1/4 NPT)
86255 86255 86275 10-01012 86281 10-01013 EGT PROBES, Type E 86149 10-01014 86153 10-01015 86156 86156 CHT Probes 86146 AN5546-1 86202 86202 86251 86251 86252 86253 10-04949 10-04951
46155 10-00128 46156 46156 46157 10-03860 46224 10-00999 Meters, Dual 3-1/8 w/ TCP 73061 05-21500 73099 05-01429 73100 05-01430 73107 05-21300 EGT Probes, Type K 86143 10-01005 86159 10-01006 86160 10-01007 86161 10-01008
Parts and Accessories 35309 10-04953 86188 10-04954 35291 10-04956 35311 10-04957 86261 10-04958 28187 10-04959 Ungrounded EGT Probes 86307 10-86307 86341 10-04952 86308 10-86308 86309 10-86309 86310 10-86310 86343 10-86339 Accessories 28113 10-01017 28202 28202 28204 10-01018 42523 10-01019 80825 80825 80827 80827 Vernier 93882 10-01020 Alcor, CHT Parts 28202 28202
476
WESTACH INSTRUMENTS
Guaranteed accurate within 2% with a 1-yr. warranty. Weight - an unbelievable 4oz. These instruments are self powered by the thermocouple, except for the lighting. 100-700F ........................... P/N 2A1...............$68.75 25375C ........................... P/N 2A1-2 ...........$69.75 SENDERS: CHT Senders have 4 ft. leads. 14mm gasket type (VW, Rotax) P/N 712-4W ........$28.50 18mm gasket type (Cont,Lyc.) P/N 712-5W ........$28.75 Bayonet type 3/8 x 24 thread P/N 712-7D .........$58.75 Bayonet type 1/8 NPT thread ....................... P/N 712-7DJ .......$56.50 (All Rotax) ..................................................... P/N 712-912K .....$58.75 700-1700F/350-950C ...... P/N 2A2...............$65.85 100-1900F/100-1000C ..... P/N 2A2-1 ...........$64.75 400-900C .......................... P/N 2A2-2 ...........$66.50 4000-1600F/200-850C .... P/N 2A2-7 ...........$66.50 SENDERS - Clamp type senders with 3/16 diameter probe. EGT Senders have 4 ft leads. 1 long tip .......................... P/N 712-2DWK ...$42.75 1/2 long tip .................................................... P/N 712-20DWK .$42.75 Long tip 1/4 threads ...................................... P/N 712-4D .........$52.75 3/8-24 for Lycomings...................................... P/N 712-4D1 .......$52.75 Long tip for VW (1/12 OD tailpipe)................ P/N 712-24DWK .$43.25 (All Rotax)....................................................... P/N 712-32DWK .$43.25 Bayonet K type, EGT probe for Rotax ......... P/N 712-4D6K .....$59.50 Exposed Tip, model 712-20DWKE - Hose clamp style 1/2 probe. P/N 10-01300 ......$52.50 Note: Westberg 712 Series Thermocouples are for Non-TSOd CHT & EGT Gauges only. They have two small pins which are the same size. 100 - 260F ..................... P/N 2A9-2* ...........$64.75 Sending Unit ..................... P/N 399S7............$29.85 *Use Sender #399S9-7/8 for Cont & Lyc Engines. (5/8-18 Thread) ................. P/N 399S9............$45.75 Guaranteed accurate within 2% with a 1-year warranty. Weight an unbelievable 4oz. K2A8MM . 0-80 PSI (w/sender) P/N 10-01292 .........$318.95 Sending Unit (Available Separately) P/N 387-12S .............$29.85 This specially constructed instrument offers accuracy and durability in a lightweight (3.5oz) package. Perfect for home-built and custom applications. K2A8-8MM. 0-15 PS w/Sender(SET) P/N 10-01553 .........$295.75
2-1/4 Non-TSOd fuel quantity indicators available for single or dual tanks. Require 0-5Vcapacitance senders (not incl.) Instrument (Single) ............. P/N 2A7V .........$65.50 Instrument (Dual) ................ P/N 2DA4V ....$119.95 2A7-2, 0-30 OHM ............... P/N 10-04125 ...$61.50 2A8-37, 10-180 OHM ......................................... P/N 10-04129 ...$60.75 2A7-4, 78-6 OHM ............................................... P/N 10-04127 ...$61.50 2A7, 240-30 OHM, Uses Float Sender .............. P/N 11-01210 ...$59.85 2A7-31, 0-90 OHM, Uses Float Sender ............. P/N 10-04128 ...$61.50 2A7-3 0-900 (Propane) Uses Float Sender ....... P/N 10-04126 ...$61.50 2AHT7V, Full Sweep Meter................................ P/N 10-04121 ...$95.25 Sender (6-12Depth) ......................................... P/N 10-00797 .$129.50 AP-24-D120-5V Sender (12- 24 Depth) P/N 10-03875 .$126.95 395-5-5 6 Capacitance, non-bend sender ........ P/N 10-04344 .$129.95 395-5SB-5 Sender (6-12 Depth-Bend.) ........... P/N 10-00798 .$131.95 395-5S-1B-5 Sender (12-24 Depth-Bend) ....... P/N 10-01262 .$127.95 AP24B5-D120-SV Sender (24, 5 bend. section) P/N 10-04412 .$129.50
CM WP ME HA AP LG EP CS
2C7V, 2 Round ................. P/N 10-04119 ...$55.75 2C7-4, 5-78 OHM, Uses Float Sender P/N 10-04124 ...$50.75 2C7-2, 0-30 OHM, Uses Float Sender P/N 10-04122 ...$58.50 2C7, 240-30 OHM, Uses Float Sender .............. P/N WS2C7 ......$59.50 2C7-3, 0-10 OHM, Propane, Uses Float Sender .. P/N 10-04123 ...$50.75 2CHT7V-5, Fuel Sweep Meter ........................... P/N 10-04120 ...$69.95
OIL TEMPERATURE
Westach frequency meter 0-70 Hz, 2 round, 110 vac. P/N 10-04205 .....................$56.85
OIL PRESSURE
Dual OP 80 psi / WT 100-260f, 2 round, 8 to 30 vdc, Use with 387-80V2-C, white dial P/N 10-04219 ...................$110.95
IN EL AV
FUEL PRESSURE
2-1/4 Size 0-30 PSI & 0-50 PSI. 2A4-14 - 0-50 IN HG (square) not altitude compensated...................... P/N 10-04178 .....$59.00 2A6-6 - 0-30 IN HG ..... P/N 10-04797 .....$63.50
WESTACH VOLTMETER
2" round.
Provides instant icing check of carburetor. 2A3-1 - 2-1/4 square, -50C to 50C P/N10-01243 ............$68.75 2C3-1 - 2 round, -50C to 50C P/N 10-03949 ...........$59.50 Sending Unit - Fits 1/4-28 Thread P/N 399W .................$42.75
TO PS BV
Range Pat No. 18-28 VOLT 10-04184 15-50 VDC 10-04185 0-300 VDC 10-04186 100-200 VDC 10-04187 0-80 VDC
10-04188 $54.95
Range 0-200 VDC 0-100 VDC 200-400 VDC 60-90 VDC 0-150 VOLT w/ threaded studs 0-300 VAC w/ threaded studs
Pat No. Price 10-04193 $49.25 10-04194 $54.50 10-04195 $49.75 10-04196 $53.75 10-04203 $56.65 10-04204 $52.50
100 to 260F, for aircraft and helicopters using coolants other than oil. ... P/N 10-01301* ...$63.75 Sending Unit ................... P/N 10-01249 ....$29.85 Order one Type 381 Fuse Adapter for each tachometer installation as a safety measure against magneto failure. P/N 10-17000 ......$9.95
COOLANT TEMPERATURE
* These instruments may be powered by connection to 12V battery, magneto, distributor or alternator. If installation is to be made using other than 12V electric power, order one Magneto Adapter, P/N 103-18 ($6.30) and one Fuse Adapter, P/N 10-17000 ($6.30) for each instrument. For 24V operation, order one Adapter, P/N 329-24 ($2.30) for each instrument.
477
WESTACH INSTRUMENTS
WESTACH INSTRUMENTS FOR ULTRALIGHTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Westach Ammeter, amp -30-0-+30A adc, 2 1/4 square, 50 mv f/s. Model with or without shunt. With Shunt P/N10-01267 ....................... $102.95 Without Shunt P/N 10-04116........................ $65.50 -60 to +60A, & #237-3A Shunt P/N K2A6-15 .................Set $104.95
AMMETERS (SQUARE)
Westach Ammeter, amp -60-0-+60 adc, 2 1/4square, 50 mv f/s. With Shunt ......... P/N 10-01277...................... $104.95 Without Shunt .... P/N 10-04114........................ $61.25
Single CHT ... 10-00419 ....$61.75 Single EGT ...... 10-01268 ...$57.50 Thermocouple for CHT (14MM) ............P/N 10-01227 .................$28.50 Probe for EGT .......................................P/N 10-01225 .................$42.75 SINGLE TACH (Tachometer requires no sender.) ....................... $105.95 P/N RPM Powered By P/N RPM Powered By
2CT5-2 2CT8-2
P/N
0-5000 0-8000
Mag Mag
CDI CDI
Powered By
Westach Ammeter, amp -30-0-30 adc, 2 round, 50 mv f/s. Note: Gauge does not include shunt. Range: -600-30 adc. Size: 2 round. Shunt: Model 237-30 Ammeter 2C6-22 .............P/N 10-04108 .......... $55.65 Shunt #237-30 .................P/N 10-01306 .......... $42.50
Mag Mag
CDI CDI
Westach Ammeter, amp -60-0-60 adc, 2round, 50 mv f/s. Note: Gauge does not include shunt. Range: -60-0-60 adc. Size: 2 Round. Shunt (Not Included): Model 237-60 Ammeter 2C6-15 .............P/N 10-04104 .......... $54.50 Shunt #237-60 .............................................P/N 10-01298 .......... $41.50 Westach Ammeter, amp 0-60 adc, 2round, 50 mv f/s. Note: Gauge does not include shunt. Range: 0-60 adc. Size: 2 Round. Shunt (Not Included): Model 237-60 Ammeter 2C6-11 .............P/N 10-04102 .......... $54.75 Shunt #237-60 .................P/N 10-01298 .......... $41.50
Cylinder Head Temp. Range: 100-700F. Use 48 Type J thermocouples. Input: 9.81 mv @ 400F, Weight: 2.7 oz. P/N 10-01791 ........ $109.95
WESTACH TACHOMETERS
FOR DUAL IGNITION
2 3 2 3 Round .........................P/N Round .........................P/N Square ........................P/N Square ........................P/N 10-01302 ........ $105.95 3CT8A-2/6 ...... $119.95 2AT8A-2/6 ...... $113.95 3AT8A-2/6 ...... $123.95
Power Range, 5V-40V, Record running time of engine. P/N 2A10-2 ......................... $109.95 No sender required.
HOURMETER
For the rotorcraft pilot, the rotor tachometer is a valuable aid to safe flight. Utilize a stateof- the-art Hall-effect sensor to accurately gauge rotor RPM based on the rotational positions of a series of magnets which are easily mounted on the rotor shaft or hub. Sensor and magnets are supplied with the gauge along with complete assembly instructions. 12 volt DC power required. Square style, 2 1/4 inch.
0-500 Tooth ...10-03808 .. $266.95 0-500 Mag. Pulse .... 10-03809 ... $258.95 0-800 Tooth ...10-03810 .. $168.95 0-800 Mag. Pulse .... 10-03811 ... $235.95
Check generator & alternator charging 6-16 VDC ............................ P/N 2A5................. $65.75 0-35 VDC........................... P/N 2A5-2 ............. $63.85 No sender required.
VOLTMETERS
For those instruments requiring 12V DC, this low output regulator/rectifier provides sufficient power to operate up to 2 WESTACH instruments. Converts lighting coil AC to 12V DC. Includes instructions, wiring harness. P/N 329-LPA ............$31.50 Proximity sensor, Hall effect sender for Bendix mag. 9/16 - 24 thd. 5-12 VDC. Weight: 7 ounces P/N 10-00863 ....................$59.95 Complete extension leads, with connector terminals, for extending CHT or EGT leads up to Complete extension leads, with connector terminals, for extending CHT or EGT leads up to 10 ft. without affecting accuracy. Longer lengths give low reading, requiring recalibration of instrument. 18 Lead ..P/N 10-17900 ..$10.50 4 Ft. Lead .... P/N 10-18000 . $11.85 6ft Lead ...P/N 10-18100 ..$13.25 8 Ft. Lead .... P/N 10-18200 . $14.45 10ft Lead .P/N 10-18300 ..$15.50 12 Ft. Lead .. P/N 10-18350 . $16.50 TSOD 2-Conductor EGT/CHT Extension Leads with sockets and sleeves at both ends. Westach TSOD EGT/CHT 6ft Extension ............ P/N 10-02161 . $11.75 Westach TSOD EGT/CHT 8ft Extension ............ P/N 10-02162 . $12.85 An internal lighting fixture may be added to all 2-1/4 & 3-1/8 instruments. Comes with clear bulb and red & green boots. P/N 186 ......................... $5.75ea TSO Cable 2-Conductor 3 W /Socket ...........P/N 10-02096 ..........$9.95 TSO Cable 2-Conductor 15 W/ Socket .........P/N 10-02095 ........$13.50 TSO Cable 2-Conductor 10 W/ Socket ........P/N 10-02094 ........$12.50 Bullets are used to connect sockets and sleeves together on the back of Westach instruments. P/N 10-02795................$0.29
Boost 0-30 psi, 2-Inch round, with 220-9, 203-17, 203-21 P/N 10-04155 ................................$48.25
SELECTOR SWITCHES
These switches are used with the Westach CHT, EGT, or CHT/EGT gauges to allow multiple cylinder engine analyzing. Switches included with Engine Analyzer kits & Add-On kits on following pages, or can order separately below. Non-TSOd. These switches have two small connectors of same size. 2-Position ..................P/N 254-2F .............. $33.25 4-Position ..................P/N 254-4F .............. $39.85 4-Position (Dual) .......P/N 254-4DF* .......... $64.75 6-Position ..................P/N 254-6F .............. $46.25 6-Position (Dual) .......P/N 254-6DF* .......... $71.75 *To convert dual EGT/CHT to Engine Analyzer. FAA APPROVED SWITCHES 4-Position ..................P/N 254-20EP ..........$46.50 6-Position ..................P/N 254-21EP ..........$55.60 6-Position (Dual) .......P/N 254-21EDPP .....$86.00 These switches are furnished with 96 leads.
478
WESTACH INSTRUMENTS
TWO INSTRUMENTS IN ONE 2-1/4 SIZE CASE - PERFECT FOR THE HOME BUILDER All pressure instruments come complete w/pressure senders only (matched to instrument). On all other instruments, order senders at bottom of page.
CM WP
DUAL EGT-CHT
700-1700F EGT 100-700F CHT P/N 2DA1 $117.95
ME HA
DUAL CHT
100-700F P/N 2DA8 $118.95 Celsius version P/N 2DA8-2 $118.95
DUAL
TACHOMETER CHT 0-5000 rpm/100-700F P/N 2DA9-5-2 $149.95
DUAL VOLT-AMMETER
6-16V/0-30 A OUTSIDE AIR TEMP P/N K2DA10-21 $153.95 -50 to +50 C. 6-16KV/0-60 amp P/N 2DA3-8 $118.50 P/N K2DA10-18 $159.95 Order 399W & 399-0T Complete with Shunt Senders Separately
AP LG EP
TWIN CHT
3-1/8 Size; Wt. 10 Oz., 3-1/8 Size, Wt. 10 Oz. 100-800F 700-1700F P/N 3DA8...$124.95 P/N 3DA2...$117.95 Order 2 thermocouples
TWIN EGT
RECORDING TACHOMETER
3-1/8 size Runs directly off magneto. 12V power required to run Hour Meter 0-3500 RPM ... P/N Y3AT32 ....$216.95 0-5000 RPM ... P/N Y3AT5-2...$239.95
CS IN EL AV
All Pressure Instruments come complete with Pressure Senders only (matched to Instrument). On all other instruments order senders at bottom of page.
Four electric instruments in one standard size 3-1/8 aircraft case. Weight - only 6 oz. Guaranteed for accuracy within 2%. 1 year warranty. Get four like readings or four different ones. Order Senders below except for pressure instruments.
QUADS
QUAD CHT
P/N 3AQ1..$308.95
QUAD EGT.
P/N 3AQ2..$267.95
For custom quad gauges, request quotation & exact location of each function as shown in the diagram.
TO PS BV
POSITION #2
CHT: 100 - 700F EGT: 400 - 1400F, 600 - 1600F OP (378 series only): 0-80#, 0-100# FP (378 series only): 0-15#, 0-80# FL: E - 1/2 - F Volts: 6-16 OT: 100 - 260F AT (outside air temp.): -60 to +100F Temp: 100 - 260F CT (carb. temp.): -60 to +100F CAT (chrg. air temp.): 100 - 400F RPM: 0-3500, 0-4000, 0-5000, POSITION #3 0-7000, 0-10000 CHT: 100 - 700F AMP: -60 to + 60, EGT: 600 - 1600F -100 to +100 OP (378 series only): MPH: 0-70 0-80#, 0-100# KPH: 0-100 FP (378 series only): WP: 0-40# 0-15#, 0-80# FL: E - 1/2 - F Volts: 6-16 OT: 50 - 250F, 100 - 260F POSITION #4 100 - 300F, CHT: 100 - 700F, 150 -300F 25 - 375C WT: 100 - 260F EGT: 400 - 1400, AT (outside air temp.): 600 - 1600F -60 to +100F OP (378 series only): RPM: 1000-7000 0-15#, 0-80#, 0-100# OT: 40 - 130C FP (378 series only): 0-80# FL: F - 1/2 - E Volts: 6-16, 18-28 OT: 100 - 260F WT: 100 - 260F Temp: 100 - 260F RPM: 1000-7000 AMP: -30 to + 30, -60 to +60
EGT Oil Pressure-387-12S (for old style gauge).............$29.85 712-2DWK (Long Life) 1 Tip ........... $42.75 Oil Temp-399S7 1/8 NPT.......... P/N 10-01249 ......$29.85 712-20DWK 1/2 Tip......................... $42.75 Oil Temp-399S9 (cont., lyc.) ...... P/N 10-01236 ......$45.75 712-4D (1/4 Plpe Bayonet) ............. $52.75 Fuel Level- 6-12 Depth ............ P/N 10-00797 ....$129.50 712-4D1 (3/8-24 for Lycomings) ..... $52.75 Fuel Level- 6-12 Depth-Bendable 712-4D6K P/N 10-00798 ....$131.95 (.8-1MM Bayonet for Rotax) ............. $59.50 Fuel Level- 12- Depth-Bendable 712-4D2 (1/8 NPT) .......................... $51.75 P/N 10-01262 ....$127.95 CHT Temp Send- 10X1.5mm thread, 1 tip, 4 lead, with crush 712-5W (18 MM Thermocouple) ...... $28.75 washer 1,750 ohms @ 100F ...... P/N 10-02641 ......$43.75 712-4W (14 MM Thermocouple) ...... $28.50 Temp Send 10X1.5mm thread, 5/8 tip, 4 lead, with crush 712-7D (3/8-24 Bayonet) .................. $58.75 washer 1,750 ohms @ 100F ...... P/N 10-02642 ..... $45.85 712-9W (10MM Thermocouple) ....... $28.85 Westberg SS Trans-0-100 psi, 1/8 npt P/N 10-02640 ....$223.95
WESTACH SENDERS
POSITION #1
CHT: 100 - 700F EGT: 600 - 1600F OP (378 series only): 0-80#, 0-100# FP (378 series only): 0-15# PRES: 0-100# FL: E - 1/2 - F Volts: 6-16 OT: 100 - 260*F RPM: 1000-7000
479
WESTACH INSTRUMENTS
CM WP
K33X K29PCX
ME HA
K30X K31X
AP LG EP CS IN EL AV TO PS BV
EGTModel: 2A2P-TSO TSO C43A EGT 700-1700f gauge, 2-1/4 square, w/ adjustable red pointer, Gauge only no senders, Use with 713 series type K thermocouple. P/N 10-04532 ...... $105.95
CHT/EGTModel: 2DA1-TSO TSO C43A Dual EGT/CHT 2-1/4 square, EGT: 7001700 f / CHT: 100-700f, Gauge only no senders, Use with 713 series type J&K thermocouples. P/N 10-04535 ...... $158.50
EGT/EGTModel: 2DA2-TSO TSO C43A Dual EGT 2-1/4 square, EGT: 700-1700 f, Gauge only no senders, Use with 713 series type K thermocouples. P/N 10-04536 ...... $162.95
OIL TEMPERATUREModel: 2A9-2-TSO TSO C43A Oil temp 100-260F, 2 1/4 square, 12/24 vdc. 2A9-2 Gauge ................. P/N 10-04534 ...... $124.75 399S9 TSOd Sender .... P/N 10-04540 ........ $49.85
CARB TEMPERATUREModel: 2A3-1-TSO TSO C43A Carb temp gauge, 2-1/4 square, 12/24 vdc, 90 degree meter, -50 to+ 50, color range markings: yellow arc -10c to 10c, with 18 cable. 2A3-1 Gauge ................. P/N 10-04533 ...... $106.95 399W-TSO Sender ........ P/N 10-04541 ........ $47.50
Note: Westberg 713 Series Thermocouples are for TSO'd CHT & EGT Gauges only. They have one small pin and one large gold color pin.
480
CM WP ME HA AP
CHT (0-600F)
EGT (0-1600F)
Gauge P/N 10-01093 ........ $49.85 Screw-in Sender10-00808.... $89.95 Gasket Sender ...10-01368 .. $86.75 Probe P100.........10-00808 .. $89.95 Wire Ext.(XS-6)...10-01688 .. $36.50
Gauge ..........P/N 10-01094 .. $49.85 Sender .........P/N 10-01591 .. $87.75 Probe P110 .P/N 10-00376 .. $95.50 Wire Ext.(XS-6 P/N 10-01688 .. $36.50
P/N 10-01088 ....................... $36.85 Gauge Sender P/N 10-01089 ........ $42.25 Sender 0-60 PSI Gauge P/N 10-02478 ........ $38.75 Sender P/N 10-01085 ........ $49.75
LG EP CS IN
AMMETER (40-0-40)
Gauge ......P/N 10-01080 ...... $36.85 Gauge ......P/N 10-01086 ...... $36.75 Gauge ......P/N 10-01082 ...... $38.75 Gauge ......P/N 10-01084 ...... $36.75 Shunt .......P/N 10-01081 ...... $14.95 Sender .....P/N 10-01087 ...... $53.85 Sender .....P/N 10-01083 ...... $38.75 Shunt .......P/N 10-01085 ...... $49.75
VOLTMETER (8-16V)
FUEL LEVEL
EL
270 Sweep Electrical Gauges
AV TO PS
Tach.........P/N 10-01076 ...... $45.75 Gauge ......P/N 10-01092 .......$36.75 Gauge ......P/N 10-01108 .......$36.85 Tach/Gen. Sender P/N 10-01077 ...... $74.75 Tach./Sender Tang. P/N 10-03148 ...... $12.75
BV
481
MITCHELL INSTRUMENTS
MITCHELL AIRCRAFT INSTRUMENTS
CM WP ME HA AP LG EP CS IN EL AV TO PS
Mitchell Aircraft Instruments is a high quality, economical line of gauges which is ideal for the homebuilt aircraft market. These electric instruments are lighted, allow easy installation, and feature a 2 year factory warranty. Order gauges and senders separately as shown. 12V operation unless other wise noted. Gauges fit 2-1/4 panel hole. For 24 volt operation, order P/N PE-111-4074 Resistors ($3.50 each) for each instrument.
OIL TEMPERATURE
100-250 100-250 100-250 120-300 120-300 120-300 F F F F F F Gauge ................ P/N Sender (Rotax) .. P/N Sender (LYC) .... P/N Gauge ................ P/N Sender (Rotax) .. P/N Sender (LYC) .... P/N 10-25000 ..$53.50 10-25005 ..$19.95 10-25175 ..$33.50 10-25010 ..$53.50 10-25015 ..$19.95 10-25180 ..$39.95
Rotax Senders are 1/8-18 NPT, Lycoming Senders are 5/8-18 VNF.
FUEL LEVEL
P/N 10-25130(10-180 OHM) .$53.50 P/N 10-02719(0-90 OHM) .....$53.50 P/N 10-02721(0-30 OHM) .....$73.50 P/N 10-02722(240-33 OHM) .$53.50 Sender ......P/N 10-25135 .....$53.50
FUEL PRESSURE
0-30 0-30 0-15 0-15 PSI PSI PSI PSI Gauge ................P/N Sender .................P/N Gauge..................P/N Sender .................P/N 10-25060 ...$59.95 10-25065 ...$37.50 10-25058 ...$59.95 10-25065 ...$37.50
VOLTMETER
P/N 10-25105 (8-16V) ...... $46.75 P/N 10-02747 (12-31V) .... $53.50 No Sender required.
TURBO
Mechanical Turbocharger Gauge. Gauge is mechanical. No sender required. P/N 10-25140 .... $53.50
OIL PRESSURE
BV
0-100 PSI ..................P/N 10-02706 ................. $53.50 0-150 PSI ..................P/N 10-02712 ................. $53.50
FUEL PRESSURE
0-15 PSI ............................P/N 10-02702 ...........$53.50
482
CM WP
$37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $37.50 $19.95 $33.50 $19.95 $39.95 $19.95 $33.50 $19.95 $39.95 $19.95 $33.50 $39.95 $46.95 $13.95 $14.00 $25.50 $69.50 $13.95 $14.00 $25.50 $69.50
ME HA AP LG EP CS IN EL AV TO
10-10170
D1-211-6102
CHT 100F-600F
$106.95
10-02745 D1-211-6109 Voltmeter Gauges 10-10164 D1-211-6086 10-10165 D1-211-6087 Ammeters Gauges 10-10174 D1-211-6104 10-10176 D1-211-6106 Fuel Quantity Gauges 10-02730 D1-211-6071 10-03610 D1-211-6072 10-03613 D1-211-6073 10-10158 D1-211-6074 10-10160 D1-211-6075 10-10162 D1-211-6076 10-03614 D1-211-6077 10-03615 D1-211-6078 10-03616 D1-211-6079 10-03617 D1-211-6080 10-03618 D1-211-6081 10-03620 D1-211-6082 Blank 10-02740 D1-211-6010
CHT Rotax 120F-300F Voltmeter 8-16 volts (FAA/PMA Voltmeter 12-31 volts ammeter 45-0-45 amp ammeter 75-0-75 amp (FAA/PMA) right Fuel 240-30 omh left Fuel 240-33 ohm Fuel gauge 240-33 ohm right Fuel 10-180 omh (FAA/PMA) left Fuel 10-180 ohm (FAA/PMA) Fuel gauge 10-180 ohm (FAA/PMA) right Fuel 0-30 ohm left Fuel 0-30 ohm Fuel gauge 0-30 ohm right Fuel 0-92 ohm left Fuel 0-92 ohm Fuel gauge 0-92 ohm blank face gauge (FAA/PMA)
External Shunts $106.95 10-10184 PS-211-9100 $106.95 10-10185 PS-211-9101 Sender Resistance (E- F) $86.75 240 - 33 Ohms $86.75 240 - 33 Ohms $86.75 240 - 33 Ohms $86.75 10-25135 PS-211-8038 $86.75 10-25135 PS-211-8038 $86.75 10-25135 PS-211-8038 $106.95 0 - 30 Ohms $106.95 0 - 30 Ohms $106.95 0 - 30 Ohms $86.75 0 - 92 Ohms $86.75 0 - 92 Ohms $86.75 0 - 92 Ohms $46.75
$42.75 $42.75
Fuel Sender 10-180 ohm (FAA/PMA) Fuel Sender 10-180 ohm (FAA/PMA) Fuel Sender 10-180 ohm (FAA/PMA)
Step 3 - Select your frame for your gauge(s) from the list below Select what postion your gauge(s) will go into. Postions are counted left to right (block style), top to bottom (vertical) starting at #1 Spruce # 10-02964 10-04084 10-02739 10-04083 10-04079 10-04020 10-04082 10-01710 10-04080 10-01711 10-02738 10-01712 10-01708 Mitchell # Gauge Capacity PM-211-9811 1 Gauge PM-211-6826 2 Gauges PM-211-6808 2 Gauges PM-211-6824 3 Gauges PM-211-6809 3 Gauges PM-211-6825 4 Gauges PM-211-6823 4 Gauges PM-211-6805 4 Gauges PM-211-6810 5 Gauges PM-211-6806 5 Gauges PM-211-6807 6 Gauges PM-211-6804 6 Gauges PM-211-6803 6 Gauges Configuration Price 1 Gauge $53.50 1 Wide 2 High $79.95 2 Wide 1 High $53.50 1 Wide 3 High $84.95 3 Wide 1 High $79.95 2 Wide 2 High $89.95 1 Wide 4 High $94.75 4 Wide 1 High $66.75 1 Wide 5 High $105.95 5 Wide 1 High $73.50 1 Wide 6 High $80.00 6 Wide 1 High $80.00 3 Wide 2 High $80.00
Horizontal or Vertical Style Spruce # 10-04097 10-04081 10-04091 10-04090 10-01709 10-03915 10-04089 10-04085 10-04087 10-04086 10-04088 10-04092 Mitchell # Gauge Capacity PM-211-6802 6 Gauges PM-211-6822 7 Gauges PM-211-6833 7 Gauges PM-211-6832 8 Gauges PM-211-6801 8 Gauges PM-211-6800 8 Gauges PM-211-6831 9 Gauges PM-211-6827 9 Gauges PM-211-6829 10 Gauges PM-211-6828 10 Gauges PM-211-6830 12 Gauges PM-211-6835 15 Gauges Block Style Configuration 2 Wide 3 High 1 Wide 7 high 7 Wide 1 High 8 Wide 1 High 1 Wide 8 High 2 Wide 4 High 9 Wide 1 High 3 Wide 3 High 2 Wide 5 High 5 Wide 2 High 2 Wide 6 High 5 Wide 3 High Price $119.95 $118.95 $139.95 $139.95 $93.50 $99.95 $148.95 $149.95 $159.95 $159.95 $185.95 $199.95
PS BV
483
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Size 3 1/8 3 1/8 2 1/4 2 1/4 2 2 3 1/8 3 1/8 2 1/4 2 1/4 2 2 8X1.0mm Clamp Clamp Description Size Description
Falcon Gauge Tachometers feature both clockwise and standard pointer type configurations. Falcon Gauge Universal Tachometers can be used for both point and Ducati ignitions. Size Description 3 1/8 3 1/8 CHT / EGT DUAL
Falcon Gauge Temperature Gauges work with most 2 cycle 2 cylinder engines. Range 100-700F / 700-1700F Square 0-340C/ 400-900C 700-1700F / 0-8000 RPM 100-700F / 0-8000 RPM 0-340C / 0-8000 RPM 100-700F / 700-1700F Square 0-340C/ 400-900C Square 100-700F / 0-8000 RPM 0-340C / 0-8000 RPM 100-700F / 700-1700F 0-340C/ 400-900C Part No. Price 10-02794 $99.75 10-02296 $77.00 10-02297 $88.75 10-02298 10-02314 $88.00 10-01404 $92.25 10-01405 $69.95 10-02317 10-02318 $86.50 10-01400 $74.75 10-01401 $72.50
Range Part No. Price 0-3500 RPM, TH3-1/8 Clockwise Tach. 500-2750 RPM 10-02273 $122.95 007CC Color Markings Standard Pointer 0-8000 RPM 2 TR-001D 10-00831 $67.50 Type Tach. CDI 0-8000 RPM Standard Pointer 2 TR-003 Universal Point 10-01615 $73.50 Type Tach. and CDI 0-8000 RPM Standard Pointer 2-1/4 T2-001U Universal Point 10-00816* $79.50 Type Tach. and CDI 0-8000 RPM Standard Pointer 2-1/4 T2-004 For MZ 202 10-04039 $72.85 Type Tach. Engine 0-8000 RPM Standard Pointer 3-1/8 T3-001U Universal Point 10-00817* $81.50 Type Tach. and CDI *Works with Rotax-point & CDI Ignition, but not 912/914 engines.
Model
3 1/8 EGT / TACH DUAL 3 1/8 CHT / TACH DUAL 3 1/8 2 1/4 CHT / EGT DUAL 2 1/4 2 1/4 CHT / TACH DUAL 2 1/4 2 CHT / EGT DUAL 2
Size 3 1/8 3 1/8 2 1/4 2 1/4 2 Round 2 Round 3 1/8 3 1/8 2 1/4 2 1/4 2 Round 2 Round 10 x 1.5 mm 10mm 12mm 14mm 18mm
Falcon Gauge Cylinder Temperature Gauges work with most 2 cycle 2 cylinder engines. Description Model Range Part No. 100-700F / 100C3-002 10-02280 700F C3-002C 0-340C / 0-340C 10-02281 FALCON 100-700F / 100C2-002 11-03960 GAUGE 700F CHT / CHT C2-002C 0-340C / 0-340C 10-01421 DUAL 100-700F / 100CR-002 10-00486 700F CR-002C 0-340C / 0-340C 10-01416 C3-001 100-700F 10-02283 0-340C 10-02284 FALCON C3-001C C2-001 100-700F 11-03958 GAUGE CHT C2-001C 0-340C 11-03959 SINGLE CR-001 100-700F 10-01412 CR-001C 0-340C 10-01413 Screw-in type, 4 CP-001 feet metal shield 10-04051 wire 10mm dia. ring, 4 ft CP-010 10-01438 metal shield wire FALCON CHT 12mm dia. ring, 4 ft CP-012 10-02286 SENDER metal shield wire 14mm dia. ring, 4 ft CP-014 10-02287 metal shield wire 18mm dia. ring, 4 ft CP-018 10-02288 metal shield wire
Price $77.00 $77.00 $82.00 $82.25 $74.75 $74.75 $49.85 $49.85 $47.50 $49.75 $43.75 $43.75 $36.75 $16.90 $17.50 $17.50 $18.95
OP-0602 Rnd. 60 PSI 10-04063 $67.50 001R Oil Pressure 2-1/4 OP-080-001 80 PSI 10-04060 $67.50 2-1/4 OP-100-001 100 PSI 10-04058 $67.50 OPT0802 Rnd. 120-300F / 80 PSI 10-04052 $118.95 001R OPT0802-1/4 Oil Press / 120-300F / 80 PSI 10-04054 $122.95 002 Oil Temp. OPT100120-300F / 100 Dual 2 Rnd. 10-04053 $119.00 001R PSI OPT100120-300F / 100 2-1/4 10-04055 $122.95 002 PSI 1/8 1/8 NPT 1/8 NPT Oil OTS-001 10-03406 $17.25 NPT Oil Temp. Temp. Sender 10X Oil Temp. Oil Temp. Sender OTS-002 10-03407 $41.50 1.5mm Sender For Rotax 914, 912
The Falcon Gauge Fuel quantity indicators resistance Empty R=240 Ohms Full R=40 Ohms. The Falcon Gauge Fuel quantity sender is electronic capacity type. 12 can be cut down to 9.5 24 can be cut down to 12.5 Size Description Model Part No. Price 2-1/4 Single Gauge, 5V Input F2-001-5 10-02264 $52.50 2-1/4 Dual Gauge, 5V Input F2-002-5 10-02265 $80.25 2 Round Single Gauge, 5V Input FR-001-5 10-03873 $53.50 2 Round Dual Gauge, 5V Input FR-002-5 10-03874 $78.75 12 12Bendable Sender, 5V Output FP-012-5 10-03419 $79.50 24 24Bendable Sender, 5V Output FP-024-5 10-03421 $76.75 2 Round Single Gauge 185 Input FR-001 10-02266 $49.95 Falcon Gauge extension wire is used to lengthen the existing wire that comes with engine gauges. It is temperature compensated wire. Available in lengths of 4-10 ft, 2 or 4 conductors. Pins must be crimped onto wire.
Size 4 4 6 6 8 8 10 10 Model No. Wire-042 Wire-044 Wire-062 Wire-064 Wire-082 Wire-084 Wire-102 Wire-104 Description 2 Conductor, 4 Feet 4 Conductor, 4 Feet 2 Conductor, 6 Feet 4 Conductor, 6 Feet 2 Conductor, 8 Feet 4 Conductor, 8 Feet 2 Conductor, 10 Feet 4 Conductor, 10 Feet Part No. 10-02339 10-02340 10-02341 10-02342 10-02344 10-02345 10-02346 10-02347 Buy $5.75 $7.50 $7.35 $11.65 $9.25 $11.75 $13.75 $17.85
484
BELITE INSTRUMENTS
Air Speed Indicator is calibrated for slow flight and designed to provide much more precise measurement of low and slow airspeeds than nonprecision steam gauges.Provides airspeed information with a visual LED display. Uses a solid state pitot pressure sensor device, which converts into a visual representation of speed. 2.25 Bezel 28-82 MPH With 1.75 Square Bezel P/N 10-04376 ....$129.95 28-82 MPH With 2.25 Round Bezel ............... P/N 10-04378 ....$129.95 35-135 KIAS With 2.25 Round Bezel ............. P/N 10-04622 ....$128.95 Straight Pitot Tube, black powdercoat ............. P/N 10-04382 ........$9.95 Bent Pitot Tube, black powdercoat .................. P/N 10-04383 ......$14.95
Provides immediate slip and skid information, simulating and improving upon the classic ball inclinometer. In enclosure with 9V battery and power switch. 3x2x1 portable With 1.75 Square Bezel.......... P/N 10-04366....$64.95 With 2.25 Round Bezel...................................... P/N 10-04368....$64.95 3x2x1 with 9V battery and power switch - portable P/N 10-04369....$84.95 State-of-the-art, low cost, true solid state gyro based turn indicator. Calibrated to exactly match existing turn rate coordinators, (at 3 degrees per second for a 2-minute turn), it is cleverly configured so that the LEDs show 3x2x1 portable when this rate is not being met by the pilot. More precise than traditional mechanical gyro instrument. With 1.75 Square Bezel.................................. P/N 10-04385 ....$119.95 With 2.25 Round Bezel................................... P/N 10-04386 ....$112.95 3x2x1 with 9V battery and power switch - portable P/N 10-04388 ....$139.95 The Belite Turn Coordinator shows a digital gyro based Turn Rate Indication and solid state Bubble Inclinometer simultaneously, producing a standard turn coordinator display. The turn rate indicator includes new technology which automatically calibrates itself every time it is turned on, so it does not have to be re-centered. In addition, power consumption has been reduced. 2.25 Bezel. P/N 10-04795 ....$187.95 This G Meter shows how strong the bumps are! It depicts G forces up to +/-6Gs. The precision, solid state accelerometer inside exceeds the capabilities of older mechanical units. With 1.75 Square Bezel .......... P/N 10-04735 ......$94.50 With 2.25 Round Bezel ........... P/N 10-04736 ......$94.50 1.75 Bezel 3x2x1 with 9V battery and power switch - portable. P/N 10-04737 ....$112.95 Pilots dream of having a fuel gauge that actually works. Heres one that does! Uses LEDs to provide a range of 0% to 100% in calibrated steps. Single With 1.75 Square Bezel P/N 10-04390 ......$69.95 1.75 Bezel Single With 2.25 Round Bezel.. P/N 10-04392 ......$74.95 Dual With 1.75 Square Bezel ......................... P/N 10-04738 ......$94.50 Dual With 2.25 Round Bezel ... P/N 10-04739 ......$94.50 This is a high precision device that provide a quick visual indication of engine temperatures with an LED column for each parameter. LEDs use color to alert pilot when things start getting hot; the display LEDs switch from bright yel2.25 Bezel low to ultra bright amber at high temperatures. EGT / CHT With 1.75 Square Bezel .............. P/N 10-04740 ....$168.95 EGT / CHT With 2.25 Round Bezel ................ P/N 10-04741 ....$168.95 Dual CHT With 1.75 Square Bezel ................. P/N 10-04742 ....$168.95 Dual CHT With 2.25 Round Bezel .................. P/N 10-04743 ....$168.95 Dual EGT With 1.75 Square Bezel ................. P/N 10-04744 ....$168.95 Dual EGT With 2.25 Round Bezel .................. P/N 10-04745 ....$168.95
BELITE INCLINOMETERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Above Ground Altimeter measures from field elevation of the airport (rather than mean sea level). Its calibrated in 100-foot increments from 0 to 1200 feet. The new air computer allows it to automatically zero for reset. With 1.75 Square Bezel ............P/N 10-04360 .....$99.95 With 2.25 Round Bezel .............P/N 10-04361 .....$99.95 1.75 Bezel 3x2x1 with 9V battery and power switch - Portable P/N 10-04363 ...$119.95
Vertical Speed Indicator displays rates of up to 600 FPM, depending on model. No buttons to push, yet provides vertical speed information using a dimmable LED display that can be adjusted for viewing in bright daylight or reduced lighting conditions. Available in dual function instrument with Air Speed Indicator and Above Ground Altimeter. With 1.75" Square Bezel .......... P/N 10-04350 ...$129.95 3x2x1 portable With 2.25 Round Bezel.......... P/N 10-04351 ...$129.95 3x2x1 with 9V battery and power switch - Portable P/N 10-04352 ...$140.95
Air Speed Indicator is calibrated for slow flight and designed to provide much more precise measurement of low and slow airspeeds than nonprecision steam gauges. Vertical Speed Indicator displays rates of up to 600 FPM. No buttons to push, yet provides vertical speed information using a dimmable LED display that can be 2.25 Bezel adjusted for viewing in bright daylight or reduced lighting conditions. 28-82 mph ASI/VSI With 1.75 Square Bezel .... P/N 10-04681...$199.95 28-82 mph ASI/VSI With 2.25 Round Bezel ..... P/N 10-04682...$199.95 35-135 KIAS ASI/VSI With 2.25 Round Bezel.. P/N 10-04683...$199.95 Air Speed Indicator is calibrated for slow flight and designed to provide much more precise measurement of low and slow airspeeds than nonprecision steam gauges. Available in 28-82MPH in 1.75 square and 2.25 round. Above Ground Altimeter measures from field elevation of 1.75 Bezel the airport (rather than mean sea level). Calibrated in 100foot increments from 0 to 1200 feet. The new air computer allows it to automatically zero for reset. With 1.75 Square Bezel....................................P/N 10-04749 ...$188.50 With 2.25 Round Bezel.....................................P/N 10-04750 ...$188.50 Vertical Speed Indicator displays rates of up to 600 FPM, depending on model. No buttons to push, yet provides vertical speed information using a dimmable LED display that can be adjusted for viewing in bright daylight or reduced lighting conditions. Above Ground Altimeter mea2.25 Bezel sures from field elevation of the airport (rather than mean sea level). Its calibrated in 100-foot increments from 0 to 1200 feet. The new air computer allows it to automatically zero for reset. With 1.75 Square Bezel....................................P/N 10-04751 ...$188.50 With 2.25 Round Bezel.....................................P/N 10-04752 ...$188.50 The Fuel Line Water Detector capable of detecting water in the fuel tank or fuel line. A discrimination between water and fuel is detected and provides an alarm signal to the aircraft operator when water is detected (even in minute quantities). The technology also provides an all clear indication when the water has passed through the detector. Water detection probes may be placed, for example, at low points in fuel tanks, or inline (between the fuel tank and the fuel selector in the engine compartment). Prevents accidents and improves flight safety. Provides a warning signal which may be used in simple applications to trigger an alarm on the instrument panel. ........................................................... P/N 10-04794 .........$140.95
Large
Small Volt Meter - Dimensions are 0.8 x 1.3. 8-19.99 volts. No backlight. Power source is from the system 7-19.99 volts. 300 micro amps nominal. Recommended for continuous power monitoring. Large Volt Meter - 3-3/4 display with backlight. Monitors 8-39.99 colts. Small .................................. P/N 10-04395....$69.95 Large .................................. P/N 10-04746....$65.75
(9 INSTRUMENTS)
Full Panel: Includes: Battery Condition Voltmeter, CHT/EGT Gauge, Fuel Gauge, Above Ground Altimeter, Turn Rrate Indicator, Inclinometer, G Meter and Air Speed Indicator. Half Panel: Includes four instruments plus the Volt MiniMeter. This is a metal panel with hardware and wiring, but the builder must make the harness and assemble. Empty Panel: Choose and install your own instruments. Holds nine instruments. Full metal panel. Empty Full Panel for 1.75 square gauges ....... P/N 10-04666 ......$99.95 Empty Full Panel for 2.25 round gauges ......... P/N 10-04747 ......$94.50 Empty Half Panel for 1.75 square gauges....... P/N 10-04748 ......$94.50
485
MICROFLIGHT GAUGES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AC or DC Powered 2 1/4 HO031 .......... P/N 10-01507 .............. $49.25 2 HO030 ................ P/N 10-01506 .............. $37.50 Senders and probes are not included umless specifically noted. See lower half of the page for senders, probes, and other accessories. 2 gauges are round. 2 1/4 gauges are square.
MICRO-1000 oil pressure electric includes 1/8 NPT SDR. 2 1/4 OP031 .......... P/N 10-01574 .............. $71.85 2 OP030 ................ P/N 10-01572 .............. $58.75
2 1/4 VM031 .......... P/N 10-01641 ..............$46.50 2 VM030 ................ P/N 10-01639 ..............$34.75
DC VOLTMETER
Includes 1/8 NPT Sender 2 1/4 OT031 .......... P/N 10-01588 ..............$59.85 2 OT030 ................ P/N 10-01586 ..............$48.85
Includes 1/8 NPT Sender. All electrical gauges have air core movements. 2 1/4 WT031.......... P/N 10-01652 .............. $58.85 2 WT030................ P/N 10-01650 .............. $48.75
WATER TEMPERATURE
HOUR METER
2 1/4 AG031 .......... P/N 10-01319 .............. $39.95 2 AG030 ................ P/N 10-01317 .............. $33.85
AMMETER 30 AMPS
ADP06 .................... P/N 10-01313 ............... $4.90 ADP07 .................... P/N 10-01314 ............... $5.50 ADP08 .................... P/N 10-01315 ............... $5.50 Nylon tubing with brass fittings. OP032.1 ................. P/N 10-01575 ............. $14.70 OP032.2 ................. P/N 10-01576 ............. $17.90
METRIC ADAPTER
TUBING KIT
6-23 Probe. Adjustable, 6-23; 240-33 ohms standard: 5-hole ASME pattern. Requires mounting kit. FGP031 .................. P/N 10-01489 .............. $26.65 Single-station senders for water and oil temperature gauges. WT030.2 ................. P/N 10-01384 ............... $8.75 OT030.2.................. P/N 10-01587 ............... $9.75 Works well with plastic and other tank. Includes threaded attachment ring, gasket, and hardware. Standard 5-hole SAE pattern. FMK01 .................... P/N 10-01501 ................ $8.75
TEMPERATURE SENDERS
SENDER ADAPTERS
Color tint lamp boots. Set of Boots. Changes your instrument backlighting to red for night flying. LB001 ..................... P/N 10-01556 .............. $0.95
APPLICATION NOTE: Most current production Rotax engines require 1/8NPT temperature and pressure senders.
THERMOCOUPLES
BAYONET TYPE
Threaded Fitting with 1/8 ...................P/N AN4076 ............$24.50 Pipe thread to mate with bayonet type thermocouple.
THERMOCOUPLE LEADS
HEAVY-WEIGHT AN SPEC. WIRE LEADS
8 Ohm Resistance, Iron-Constantan, 90 In.
P/N 8 Ohm Resistance, Iron-Constantan, 144 In........P/N 8 Ohm Resistance, Iron-Constantan, 20 Ft. ........P/N EGT E.W. Rings P/N 42535 ...... $35.50 42536 ...... $45.75 42537 ...... $58.75 11-05672 . $62.75
CHT Probe, Type J, Style AN 5541-1 P/N AN5541-1 ..........$62.70 EGT Probe, Type K MM-111.......................P/N 11-01022 ..........$59.50 CHT Probe, Type K .....................................P/N 11-01023 ..........$61.50 Cessna CHT Probe S2334-3 - Must be used with the new Rochester Gauges. Cannot be used with the old Stewart Warner Gauges P/N 06-00703 ........$271.95 Note: These probes will only work with a grounded system.
486
MICROFLIGHT GAUGES
Superior to any other type of pyrometer available. Unlike competing brands, these units are temperature compensated. That is, when the ambient temperature changes, MICRO-1000 pyrometers still read the same. And we guarantee that, when properly installed, these pyrometers will be accurate within 2%. Like other MICRO-1000 gauges, these units come with our standard 2-year CP131 EP131 EP130 warranty. Order gauges, probes, and extension leads separately. NOTE: MICRO-1000 pyrometers are not compatible with other thermocouple probes. Order Micro-1000 Probes. 2% Accuracy Easy-to-Read Dial Backlighting Standard Temperature Compensated Shock & Vibration Resistant Designed & Built for Aircraft
CM
CYLINDER HEAD TEMP.
2-1/4 ... P/N 10-01424 ...$112.95 2 ......... P/N 10-01423 .....$99.85 0-600F Includes 14mm ring probe
WP ME HA
OIL PRESSURE
2-1/4 ... P/N 10-01570 ....$91.75 2.......... P/N 10-01567 ....$79.50 Includes 1/8NPT sender
OIL TEMP.
2-1/4 ... P/N 10-01583 .....$62.50 2.......... P/N 10-01579 .....$49.85 Includes 1/8NPT probe
AP LG
MICRO-1000 LEADS
7-ft. CHT - Leads required ...............P/N 10-01442 .......... $21.60 15-ft. CHT - Leads required .............P/N 10-01443 .......... $46.75 7-ft. EGT - Leads required ...............P/N 10-01480 .......... $17.75 15-ft. EGT - Leads required .............P/N 10-01481 .......... $33.75 NOTE: For a complete CHT or EGT set, order Gauge, Probe, and leads The CHT probe (above left) is a high quality Chrome/Constantan E type. A more expensive material than that of the more commonly found J type, the E type probe produces much greater accuracy at lower temperatures (less than 600F). Extension wire is of the same material as the thermocouple to preserve the accuracy and temperature compensation qualities. NOTE: The 15 extension leads may be shortened up to seven feet. The EGT probes are high-quality Chrome/Alumel K types. Choose the weld-on boss type (above) for new engine installations. Choose the clamp-on type (above) to replace the existing probe. Order gauges, Micro-1000 probes and extensions separately. Note: These are K type grounded probes, not for use on digital gauges. For use with Micro-1000 gauges. Scaled 0-600F 2-1/4 CH131 ..... P/N 10-01426 .................. $68.75 2 CH130 ........... P/N 10-01425 .................. $59.50
AMMETER - 12 VDC
2-1/4 ... P/N 10-02335 .... $47.50 2 ......... P/N 10-02334 .... $41.65 No shunt required
VOLTMETER-12 VDC
2-1/4 ... P/N 10-01638 .....$39.75 2 ......... P/N 10-01637 .....$38.50 With color arc
EP CS IN
CHT
WATER TEMP.
2-1/4 ....P/N 10-01649 ... $59.95 2...........P/N 10-01646 ....$48.75 Includes 1/8NPT probe
EL AV
Scaled 0-600F 2-1/4 CH141 ........ P/N 10-01429 .................. $99.50 2 CH140 .............. P/N 10-01428 .................. $99.50
DUAL CHT
Scaled 800-1700 F 2-1/4 EG131 ....... P/N 10-01464 .................. $76.50 2 EG130 ............. P/N 10-01463 .................. $59.50
EGT
HOUR METER-12VDC
2-1/4 ... P/N 10-01505 .....$36.75 2 ......... P/N 10-01504 .....$28.75 With minute hand
TO PS
2-1/4 EG141 ....... P/N 10-01467 .................. $98.75 2 EG140.............. P/N 10-02093 .................. $99.50 VDO Float Probes - 240 ohms......... P/N 10-00826 ....... $47.70 Fuel Probe Mounting Ring ............... P/N 10-01502 ....... $26.50 VDO Temperature Probes - 1/8NPT Water Probe 1/8 NPT ..................... P/N 10-01648 ....... $11.75 Oil Probe 1/8 NPT........................... P/N 10-01580 ....... $14.95 Oil Temp. Probe 3/8 NPT ............... P/N 10-01582 ....... $16.50 VDO CHT Probe - Type J 14mm ring type ................................ P/N 10-01439 ....... $28.50 VDO EGT Probe - Type K Weld-on Boss. .................................. P/N 10-01461 ..... $138.95 Oil Pressure Sender 1/8 NPT ....................... P/N 10-01568 ....... $41.75
DUAL EGT
VDO PROBES
BV
2-1/4 CE141 ........ P/N 10-01409 ................ $105.95 2 CE140............... P/N 10-01408 ................ $101.95
DUAL CHT/EGT
487
MICROFLIGHT GAUGES
STANDARD MICROFLIGHT ENGINE GAUGES
CM WP ME
Standard gauges are a low cost solution for monitoring engine performance. The gauges on this and part of the next page are light-weight, inexpensive alternatives. These gauges are not temperature compensated; changes in ambient temperature will affect their readings. Unlike our MICRO-1000 gauges, they do require shock mounting. All gauges come with a 1-year warranty which covers any malfunction. Prices include probes with 4-ft. leads. Gauges leads may be extended with 18-gauge wire. C at end of P/N indicates temperature scale in degrees celsius.
DUAL CHT
2-1/4 ... P/N CH005 ... $133.95 2-1/4 ... P/N CH005C $133.95 Includes probe
DUAL EGT
2-1/4 .... P/N EG005 ... $147.95 Includes probe
HA AP LG
2-1/4, 0-700F ..P/N CH004 ....$73.75 2-1/4, 0-350C ..P/N CH004C .$75.25 Includes probe
CHT/EGT COMBINATION
CHT PROBE
J type sending unit with 4-ft. lead. 14 mm .... P/N CP001.... $25.75 10 mm .... P/N CP002.... $16.90
EP CS IN
2-1/4 .....P/N CE003 ....$150.95 3-1/8 for 2-cycle engines for single 2-1/4 for 2-Stroke Engines Ignition Single Ignition (all) ..P/N TA006 .. $79.50 2-1/4 .....P/N CE003C .$128.95 Includes probe Ducatti Ignition... P/N TA023 ... $81.50 Ducati Ignition.........P/N TA021 .. $69.85 For lighting coil operation For lighting coil operation No power required. No power required.
CHT/EGT COMBINATION
2 ..... P/N CE001 .........$129.00 2 ..... P/N CE001C ......$131.95 Includes probes
EL AV TO PS BV
2, 0-700F ....P/N CH001 ....... $69.75 2, 0-350C ....P/N CH001C..... $70.00 Includes probe
K type sending unit with 4-ft. lead. P/N EP001 .......$31.00 8 mm threaded EGT Probe (for new 2-stroke Rotax) P/N EP002 .......$34.75
DUAL TACH/EGT
2 round gauge Tachometer Universal for single or dual ignition. EGT range: 700-1700F EGT probe (clamp type). P/N ET002R ........ $85.50
DUAL CHT
2 ............ P/N CH002 ..........$126.95 2 ............ P/N CH002C ........$126.95 Includes probes
DUAL EGT
2 ...........P/N EG002 ............$139.00 2 ...........P/N EG002C .........$139.00 Includes probes
ORDER ONLINE!
www.aircraftspruce.com
0-8000 RPM TACHOMETER
2 for 2-Stroke Engines Single Ignition (all) P/N TA001 .. $73.50 Ducati Ignition....P/N TA020 .. $67.50 For lighting coil operation
488
CM WP ME HA AP
The MAP60-A, Manifold Absolute Pressure Gauge provides an accurate digital display of your engines intake manifold absolute pressure. Commonly found and used in high performance aircraft with constant speed propellers, and/or with boost devices such as super and turbochargers. The MAP60-A is set up to use the UMA 5-60 InHg absolute pressure transducer. The display will show manifold pressure in tenth of an inch increments, from 5.0 to 60.0 InHg. The LOW and HIGH user settable alarms can be set over the entire range. The HIGH alarm in this case might be set to alert the pilot to a OVERBOOST condition. When activated the built-in 85dB alarm will sound and the display will flash. The External Alarm output would most likely be used to activate an annunciator/warning OVERBOOST condition light. Five levels of backlighting can be selected and then all setup, and alarm values will be saved to a nonvolatile memory. Senders not included. MAP60-A .........................................................P/N 10-02872 ....................... $154.95 N1EU50A Pressure Sender ............................P/N 10-01062 ....................... $118.95
The P60-A DIGITAL PRESSURE GAUGE, can be used to display ENGINE OIL(AO), DRIVE OIL(ADO), WATER(AW), or FUEL(AF)pressures in PSI or Bars. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, and Stewart-Warner (sender not included). The sender type is easily selected with the front panel keys. LOW and HIGH pressure alarms can be set over the entire range of the instrument/sender. When activated the P60-A built-in 85dB alarm will sound and the display will flash. Five different levels of internal backlighting can be selected, and then all setup, calibrations, constants, alarm values, sender type, and lighting level are all saved to a nonvolatile memory. Terminal C comes Factory preset to use as an External Alarm signal. This 5V,10mA signal voltage could be used in conjunction with the optional ER-1A electronic relay to control a backup/secondary piece of equipment (electric water pump / fuel pump) or simply used to illuminate a panel warning light. NOTE: Alarm functions must be activated or enabled to utilize them. P60-A Engine Oil Pressure Gauge.................... P/N 10-02874 ....................... $158.95 P60-AD PSRU Oil Pressure Gauge .................. P/N 10-02875 ....................... $154.95 Water/Coolant Pressure Gauge ........................ P/N 10-02876 ....................... $154.95 P60-AF Fuel Pressure Gauge ........................... P/N 10-02877 ....................... $154.95 Hydralic Pressire Gauge (with sender) .............. P/N 10-02878 ....................... $198.95
LG EP CS IN EL AV TO PS BV
The T60-AE DIGITAL TEMPERATURE GAUGE provides an accurate digital display for Engine Oil(AO), Drive Oil(ADO), or Engine Water(AW) TEMPERATURES in either degrees F or C. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, Stewart-Warner, and others(senders not included). Sender type is easily selected using the front panel keys. LOW and HIGH temperature alarm limits can be set over the entire range of the instrument/sender. When activated, the built-in 85dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press. Five different levels of internal backlighting can be selected. Then all setup, calibrations, constants, alarm values, sender type, and lighting level selected are all saved to a nonvolatile memory. Terminal C can be programmed as an External Alarm output. ..... T60-AE Engine Oil Temperature Gauge ...........P/N 10-02881 ....................... $154.95 T60-AD PSRU Oil Temperature Gauge ............P/N 10-02882 ....................... $154.95 T60-AW Water Temperature Gauge .................P/N 10-02883 ....................... $154.95 The PY60-AE DIGITAL EGT/CHT GAUGE works with both J and K type thermocouples to provide accurate monitoring of your engines cylinder head or exhaust gas temperatures, from -4-2012F (-20-1100C). LOW and HIGH temperature alarm limits can be set from 32-2012F (0-1100C). When activated, the built-in 85dB alarm will sound and the display will flash. The highest temperature seen is automatically saved to a nonvolatile memory, and can be displayed or reset at any time. Five different levels of internal backlighting can be selected, then all setup, calibrations, and constants are also saved to nonvolatile memory. PY60-AE Exhaust EGT Gauge .........................P/N 10-02884 ....................... $233.95 PY60-AC Exhaust EGT Gauge .........................P/N 10-02885 ....................... $224.95
The F60-A DIGITAL FUEL GAUGE provides an accurate digital display of fuel remaining, trip fuel and total fuel used. Fuel remaining can be displayed up to 6550 liters or gallons, or as a percentage (0-100%) with user selectable display dampening to help prevent unwanted fluctuations in rough air. The F60-A is programmed for use with all known resistive American and European level senders made by VDO, Teleflex, Mercury, GM, Stewart-Warner, Centroid, Faria and others. LOW and HIGH fuel alarms can be set over the entire range. When activated, the built-in 85dB alarm will sound and the display will flash. Five different levels of internal backlighting can be selected, then all setup, alarm values, sender type and maximum tank capacity are saved to a nonvolatile memory. The External Alarm output on Terminal C can be programmed to activate an annunciator warning light, such as LOW FUEL or to control one of our ER-1A remote relays for the possible transferring of fuel from another tank. When the transfer mode is selected (tFEr), the pump will turn ON at the selected LOW alarm value, and OFF, when the fuel reaches the HIGH alarm setting. The gauge display will flash during the pumps operation. P/N 10-04908 is the correct sender for this unit. Will work up to 150 PSI. For experimental use only, not for use on certified aircraft. Specifications: Power Supply; 9.5-33.0 VDC (.018 amp nominal). Operating Temp: 32-122F(0-50C). Size/ Weight: 2.475 square, low profile...easily stackable bezel, with standard aviation 2.250 raised round ring. Standard 2.625 diameter mounting hole layout at 45 degrees. Proprietary unique bezel design allows user the option of either front or rear mounting our gauges in their panel. Gauge depth behind panel: surface mounted approx. 2.60, rear mounted, approx. 2.90. Weight approx 2.3oz.. Accuracy: Limited only by sender accuracy.. Sender: Works with 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohm (and/or their inverse) level senders by VDO, Teleflex, GM, Stewart-Warner, Mercury, Faria,and others (both American and European) Also available in capacitance (0-5V), and 4-20mA sender versions.. Alarms: 85dB internal LOW and HIGH level alarms, settable from 000.0 to 6553. External alarm output (5V,10mA(max). Display: 4 digits, Liters, Gallons, or %. 000.0 to 6553 gallons or liters Five levels of backlighting.. Output: Terminal C can be used as an External Alarm signal,(5V, 10mA) for a LED warning light... or as a control signal for an ER-1A relay and a possible fuel transfer pump. F60-A Fuel Gauge (pictured)............................. P/N 10-02868 ...................... $139.00 Fuel Flow Gauge FU-60-A ................................ P/N 10-02869 ...................... $232.95
489
The T60-A Temperature Gauge displays water or engine oil temperature in either degrees F or C. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, Stewart-Warner, and others. (senders available separately) Sender type is selected with the front panel keys. LOW and HIGH temperature alarms can be set over the entire range of the instrument/ sender. When activated, the built-in 85dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press. Five levels of backlighting can be selected. Then all setup, calibration constants, alarm values, sender type and lighting level selected are saved to nonvolatile memory. Terminal C can be programmed as an External Alarm output. This could be used in conjunction with an ER-1A electronic relay to control optional equipment such as an electric radiator cooling fan, or to simply activate a warning/annunciator light on your panel. NOTE: The T60-AE ( Engine Oil Temperature Gauge ) is compatible with the Rotax 912S / 914 Series supplied with 1000-75 OHM ( 68F-320F ) Oil Temperature Sensor. T60-A Oil Temperature Gauge for Rotax ........P/N 10-04877 ....................... $149.95
The F60-OPR Oil Pressure Gauge provides an accurate digital display of Engine Oil Pressure. The F60-OPR is programmed for use with the ROTAX Factory installed Honeywell Oil Pressure Transducer. Low and High alarms can be set over the entire range. When activated, the built-in 85dB alarm will sound and the display will flash. Five different levels of internal backlighting can be selected, then all setup and alarm values are saved to a nonvolatile memory. The External Alarm output on Terminal C can be programmed to activate an annunciator warning light, such as Low or High Pres or to control one of our ER-1A remote relays. F60-OPR Oil Pressure Gauge.........................P/N 10-04873 ....................... $149.95
The F60-FPR Fuel Pressure Gauge provides an accurate digital display of the fuel systems pressure. The F60-FPR can be specifically used with the ROTAX 912S/ 914 series engine with the Mechanical Fuel Pump, in conjunction with a F60-FPT (0-15PSI Fuel Pressure Transducer) LOW and HIGH pressure alarms can be set over the entire range. When activated, the built-in 85dB alarm will sound and the display will flash. Five different levels of internal backlighting can be selected, then all setup and alarm values are saved to a nonvolatile memory. The External Alarm output on Terminal C can be programmed to activate an annunciator warning light, such as Low or High Pressure or to control one of our ER-1A remote relays. F60-FPR Fuel Pressure Gauge for Rotax .......P/N 10-04875 ....................... $139.95
The V55-A Battery/System Voltage Monitor gauge provides an accurate low cost digital instrument for battery/ system voltages between 9.5-33.0 VDC. You can set independent LOW and HIGH voltage alarms. The V55-A built-in 85dB alarm will sound and the display will flash. Five levels of backlighting can be selected and then all setup, calibration constants and alarm values are saved to nonvolatile memory. Terminal C can be selected and used as an External Alarm output signal. (5V, 10mA max). V60-A Voltmeter............................................. P/N 10-02886 ........................ $156.95
The AM60-A Digital Ammeter provides an accurate low cost digital instrument for monitoring your aircrafts electrical load (amps), and is programmable to use a 5.0 to 900 amp shunt. (available separately). Up to 90.0 amps the AM60-A can display your load current in tenths of an amp. Above 90 amps current is displayed in full amps. The AM60-A can be powered by any voltage between 9.5 and 33.0 Volts. Five levels of backlighting can be selected using the front panel keys and backlighting can be turned ON/OFF remotely. All setup, calibrations, and constants are saved to nonvolatile memory AM60-A Digital Ammeter ............................... P/N 10-02864 ........................ $136.95 Ammeter With 150A Shunt ............................ P/N 10-02932 ........................ $149.95 ADI AM60 85AMP Shunt only ....................... P/N 10-02893 .......................... $45.95 ADI 150AMP 50MV DC Shunt....................... P/N 10-04879 .......................... $46.75 ADI 450AMP 50MV DC Shunt....................... P/N 10-04880 .......................... $59.75
The CT60-A Clock/Timer is an accurate 12/24 hour format clock with a resettable down-counting timer with eight time-of-day settable alarms. The clock is Factory calibrated, but can be adjusted with the front panel switches and calibrations saved to nonvolatile memory. The clock is accurate to within five seconds per day, and is Factory calibrate to within one second per day. The CT60-A has a large LCD display, yet draws only 0.018 amps. Five levels of backlighting can be selected and all setup, calibration constants and alarm values are saved in nonvolatile memory. CT-60A Clock/Timer ...................................... P/N 10-02865 .........................$138.75
490
TL ELEKTRONICS INSTRUMENTS
High performance, small dimensions & weight - an ideal instrument suitable for all types of engines Set value limits at 2 levels (Warning & Alarm) for all measured values. In case these values are exceeded the instrument will warn you in time of any possible engine damage Configure display to show temperature, pressure, rotations, battery voltage, engine hours, OAT, fuel consumption as you wish using the configuration program delivered with the instrument. Size: 3-1/8 Digital eng. instr. for combinate engine values measuring ................................................. P/N 10-00893 ............................$856.00 Thermocouple probe for EGT (type K) M8x1 screw type - for all engines ......................... P/N 10-00894 ..............................$75.50 Thermocouple probe for CHT (type J) 12mm hole - for all engines ................................... P/N 10-00895 ..............................$42.65 Thermocouple probe for CHT (type J) 14mm hole - for all engines .................................................................. P/N 10-00896 ..............................$59.95 Thermocouple probe for CHT (type J) 18mm hole - for all engines .................................................................. P/N 10-00897 ..............................$59.95 Oil or water temp. sender (0 to 110C/230F) for Rotax 2-stroke ..................................................................... P/N 10-00898 ..............................$59.95 Oil or water temp. sender (0 to 150C/300F) for Rotax 4-stroke ..................................................................... P/N 10-00899 ..............................$59.95 Passive oil pressure sender (0 to 145 PSI, 1/8-NPT) for all engines ............................................................... P/N 10-00904 ..............................$75.75 Active oil pressure sender (0 to 145 PSI, 1/8-NPT) for all engines .................................................................. P/N 10-00905 ............................$350.95 Metal hi-quality flow sensor (0-30 gph)-all engines............................................................................................ P/N 10-00906 ............................$324.00 Passive speed sensor-all eng. (inductive sensor).............................................................................................. P/N 10-00907 ..............................$39.95 Active speed sensor-all engines (hall effect 3-wire sensor) 5-30V power supply req. ...................................... P/N 10-00909 ............................$148.95 Active speed sensor-all engines (hall effect 3-wire sensor) 5V. ....................................................................... P/N 10-00910 ............................$148.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Measure immediate fuel flow of your engine in liters/ hour or liters/100 km and average fuel consumption Set limit values at 2 levels (Warning & Alarm), for all measured values. In case these values are exceeded, the instrument will warn you prior possible failure or damage of the engine Display at any time the fuel levels in the left, right or both fuel tanks. Size: 2-1/4 Fuel computer without fuel-flow sensor............. P/N 10-00870 ..$444.95 Metal high-quality flow sensor for all engines ... P/N 10-00871 ..$325.00 Fuel Qty Sender Float (240-30 OHM) ............... P/N 10-00056 ....$37.75 Active cap. fuel level sender (all aircraft) .......... P/N 10-00798 ..$131.95 Active fuel pressure sender (all aircraft) ........... P/N 10-00873 ..$255.95
FUEL COMPUTER
Measure rotations & engine hours with the option to trigger the counting from a certain engine rotation rate (by your choice) so that you can divide taxing from flight time Set value limits at 2 levels (Warning & Alarm) for all measured values. In case these values are exceeded the instrument will warn you in time of any possible engine damage Several separate users with pilot/student option suitable for several owners or in flight schools, where the instructor selects the student and the time will be measured only against his/her name. Size: 2-1/4 Digital RPM w/ engine-clock & stop-watch ..... P/N 10-00886 ....$309.00 Digital RPM w/ engine-clock, stop-watch & internal speed sensor P/N 10-00887 ....$556.00 Use the thermometer to measure up to 4 temperatures and oil pressure Use the automatic choke function using the modelers servo regulated by thermometer according to any of the measured temperatures e.g. CHT Set value limits at 2 levels (Warning and Alarm) for all measured values. In case these values are exceeded the instrument will warn you at time of any possible engine damage Set the form of display either by gradual switching of measured temperatures on the display at intervals selected by you (SCAN function) or displaying the closest temperatures to the limit values that you have set. Size: 2-1/4 Therm. for 4 temp. & press. w/choke control P/N 10-00874 .... $369.95 Thermocouple probe for CHT (type J) 12mm hole - for all engines P/N 10-00876 ...... $59.95 Thermocouple probe for CHT (type J) 14mm hole - for all engines P/N 10-00877 ...... $59.95 Oil or water temp. sender (0 to 150C/300F) for Rotax 4-stroke. P/N 10-00879 ...... $28.75 Using the accelerometer measure the operational values of your aircraft on the vertical axis Set value limits at 2 levels (Warning and Alarm) for all measured values. In case these values are exceeded the instrument will warn you in time of any possible damage to the aircraft Always be informed of values approaching the limits, which could result in damage to the aircraft Always be aware of exceeded values from the previous flight after switching on the instrument Start of logging is carried out by a switch on the undercarriage or by an internal / external pressure sensor on attaining your selected speed. Size: 2-1/4. Digital accelerometer..........................P/N 10-00889 .................$431.95 Digital accelerometer w/ internal airspeed sens. P/N 10-00890 .................$579.00
THERMOMETER
Intelligently managed voice activators (VOX) Listen to your favorite music e.g. from CD/cassette directly to your headphones or attach your intercom to your mobile telephone Control your intercom digitally using keys & displays Record and play pre-takeoff or landing checklist directly to your headphones (checklist can easily be created on your PC and recorded into the intercom) In case of accident simply switch on emergency broadcast, which will be re-played at short intervals and transmitted using a RDST w/pre-recorded message. Size: 2-1/4 Intercom w/voice alarm, checklist & digital voice rec. P/N 10-00867 .$459.00 Connection cable for mobile phone.................... P/N 10-00868 ...$26.40 Connection cable to VHF airband-transceiver ... P/N 10-00869 ...$52.75
INTERCOM
2 instruments for the price of one altimeter & mode C encoder for all types of transponder Set value limits at 2 levels (Warning & Alarm) for multiples Display QNH or QFE levels with the option of setting zero The instrument will provide a warning if an insufficient oxygen altitude is reached The instrument will signal low altitude, e.g. after opening of undercarriage, MDA, approach. Size: 2-1/4 P/N 10-00891 ....$522.00
G ACCELEROMETER
First volt-ampere meter with 3-phase measurement of voltage, current & frequency Connect up to 3 circuits for measuring current and voltage, for example instrument panel circuit, light circuit and flash and other circuit Check the activity of the three-phase voltage converter for an artificial horizon using your voltmeter with the option of checking 400 Hz frequency Set value limits at two levels (Warning and Alarm) for minimum & maximum voltage and current. Set the form of display either by gradual switching of voltage and current on the display at intervals chosen by you (SCAN function) or by displaying lowest or highest current-voltage. Size: 2-1/4 Digital volt-ampere meter & frequency meter P/N 10-00883 .....$379.00 Current shunt sensor for measuring to 50amps (for all aircraft) P/N 10-00884 .......$59.95
VOLT-AMPERE METER
TL-3424-RAS ACCELEROMETER
The TL-3424 is complete weight acceleration management. The instrument incorporates a high-precision sensor for measuring acceleration in the vertical axis. The SAS version also incorporates a sensor for measuring the indicated airspeed, which enables the activation of memory recording. Both versions enable to utilize an undercarriage scanner that can also activate memory recording. P/N 10-02312 ......................... $564.00
491
AE FUEL GUARDIAN
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Safety-fly 700 is a useful universal control device for ultralight aircrafts that monitors in real-time, by means of warning lights and an acoustic buzzer, all the engine pre-alarm parameters listed below using the standard sensor signals installed on the Rotax engine, thus avoiding engine problems. Safety-fly 700 displays and checks: pre-alarm cylinder heads pre-alarm engine oil temperature pre-alarm minimum and maximum engine oil pressure green light for regular oil temperature fuel light for open taps the position of flaps on 3 levels timer set to 2 minutes The calibration is done directly by the pilot, by means of the existing instruments installed on the dashboard. Safety-fly 700 is supplied with wiring harness, connectors and operating manual. 3 year warranty. Made in Italy. P/N 10-04934 .....................................................................$265.95 This system gets your attention before you have to switch tanks. When the annunciator light flashes, you will know your precise fuel quantity and also the time to engine shut-down for that tank. HOW DOES IT WORK? - The optical fuel sensor is a non-contact sensor mounted in a single hole in the fuel tank. It operates by bouncing a beam of light into the sensors lens. If it is reflected back into the sensor, there is no liquid present. If it is not reflected back, it is dissipated into the liquid media. The sensor output is pulled down, or activated.The electronics constantly monitors the sensor outputs of both tanks. When a low fuel level is detected, the appropriate light starts to blink, getting the pilots attention immediately. After the pilot sees the alarm, he can press the acknowledge button. This action turns the light on solid (continuous) denoting a low fuel quantity. This function of the annunciator eliminates the distracting flashing action of the lights for the pilot, yet he can still see that he has a low fuel indication. The AE Fuel Guardian also has an audio output that can be wired into the aircraft intercom or audio system if desired. The audio beep is only present when the annunciator lights are flashing. The AE Fuel Guardian annunciator lights can also be wired into the aircraft dimmer bus if desired for night flight. This system is 100% solid state and is compatible with 12VDC or 24VDC electrical systems. The installer sets the sensors to provide low fuel warning at whatever level is desired. System includes (2) annunciator panel lights, (2) optical sensors, (1) push button, Sensor drive and annunciator electronics enclosure, wiring, and lettering decals. For Experimental aircraft only. Kit With One Sensor ...................P/N 10-01811 ..............$149.00 Kit With Two Sensor ...................P/N 10-00399 ..............$210.00 One Button, Multi-function,Aircraft Annunciator - Fuel Gauge, Several styles available (with low fuel warning and caution zones) Volt Meter & Current Meter (with low & high warnings and caution zones) A full service Aircraft Annunciator, Fuel Gauge, Oil Level Gauge, Volt Meter & Current Meter. Will display many different aircraft warnings. All devices feature user programmable alarms. Utilizes a push-button LCD display that is backlight with a 3 color LED. All functions are fully programmable by the user. The push-button/display can be used for programming, acknowledging the alarms, and paging thru up to 16 different screens or "annunciator points". Can automatically scan thru each screen or it can be done manually using the push-button. The pilot has the ability to mask or unmask annoyance alarms. NOTE: Input devices not included. It is up to the user to provide input devices such as fuel senders, shunts, oil level sensors and input switches to drive the AG6 DISPLAY & PUSH BUTTON P/N 10-04180 ..................$169.95
Originally designed for small Lycoming engines, but can be utilized on several other engine types as well. Utilizes a 1/2 NPT fitting so that it can be inserted directly into the oil pan of most small Lycoming Engines. The 5/8 x 5/8 square bolt head of this sensor has been drilled (0.08 dia.) to accept a safety wire. Material: Stainless Steel construction Switch: Normally open when normal oil level, 30V @ 0.35Adc max. Temperature: -20F to +280F You can utilize the flashing panel light, a relay, or utilize your own panel indicator. The maximum current draw for any light or relay is 0.2Adc. The light can be mounted in the instrument panel using a 0.249 to 0.254 diameter mounting hole. The light supplied will operate from a +12Vdc system. To make this system +24V compatible, you will need to add a 12V zener diode in series with our flashing panel light. AE Low Oil Level Sensor (sensor ONLY) ...............................................P/N 10-01812 ....... $99.00 AE Low Oil Level Sensor with blinking red LED (LED blinks when oil level is low) .....................................................P/N 10-03891 ..... $109.95
The AFPR is a "Smart" Auxiliary Fuel Pump Relay. This device allows the pilot to flip oneswitch and quickly drain the contents of the auxiliary fuel tank without over stressing the auxiliary fuel pump. The AFPR will pump down the auxiliary fuel tank, and then automatically shut the fuel pump off when no fuel is detected. The AFPR includes a very reliable optical fuel sensor that can be easily installed in the auxiliary fuel tank or in the fuel line. The AFPR can be operated in and one of four modes of operation. The AFPR also has an output that can be used for a light to indicate when the fuel pump-down has been completed. Input Power: 12Vdc or 24Vdc, 0.1A max. Enclosure: 3.5 x 2.25 x 1.25 (89mm x 57 x 32mm ) Fuel Sensor Mounting Hole: 0.475 (12mm) P/N 10-04343 ............$129.95
RELAY BOARD USE: Control your Flap & Elevator Trim motors. This board allows you to use any inexpensive switch [Single Pole, Double Throw, (ON)-OFF-(ON), Spring Loaded, 3 Position] to control your flap and elevator trim motors. You can series as many switches as you desire control your flap & elevator trim motors. Free connection diagrams for relay boards and airspeed switch for several typical systems. AIRSPEED RELAY USE: Flap Deployment Protection at High Airspeeds When our relay board is used with our airspeed switch, you can protect you flaps from being actuated in the downward direction when your airspeed is too high (above the white arc). We provide the end user with easy connection diagrams for several different systems. Automatic Speed Adjust for Elevator Trim Motors Many have complained about the fast adjustment speed of elevator trim motors at high airspeeds. When our relay board is used with our airspeed switch, it eliminates this problem. You will have two speeds, fast for slower airspeeds, and slower for high airspeeds. The slower speed is adjusted by supplying this relay board a lower motor drive voltage. RELAY BOARD SPECIFICATIONS Each board includes two independent, Single Pole, Double Throw Relays. Relay contacts are protected against inductive sparking generated from switching inductive loads such as motors. For use on 12Vdc systems. Switch currents up to 10 Amps. Boards are stackable to 3 levels high for saving panel space. Mounting hardware included AE Relay Board One .......................... P/N 10-01814 ....................$45.25 AE Relay Board Two Staked ..................P/N 10-01815 ................$63.75 AE Relay Board Three Staked ........... P/N 10-01816 ....................$79.00 AE Airspeed Switch & Board ..................P/N 10-01817 ................$93.00
SAFETY-FLY 700
492
AEROSPACE LOGIC
Available in 4 or 6 cylinder configurations Supports most type K thermocoupleprobes Displays information in C & F with automatic conversion of all setup parameters Accuracy to within 1F Displays temps from 0F 1900C / 0C1040C (EGT); 0F 700C / 0C371C(CHT) High speed scan and acquisition rates. While others update information every 5 seconds and more, our instrument provides precise information every 1 second! Analog bar type and digital display Select between any of these powerful display pages: 1) Any specific cylinder. Choose the cylinder you wish to monitor and change to the next whenever you wish. 2) Sequential step through each cylinder with 5 second delay. 3) Auto select. Selects the hottest cylinder, updated every 1 second. 4) Switch between any selectable function and the auto function and return to the last monitored setting without any data loss! User programmable high and low limits Internal and external brightness control (user programmable) 9V-33V operating range Only 2.2 deep Fits std 2.25 mounting holes Full 1 year warranty.
Part No. 10-00447 10-02154 Model No. CHT-100-4 CHT-100-4V Description Cylinder Head Temperature Instrument Cylinder Head Temperature Instrument with Built in Voltmeter Cylinder Head Temperature Instrument with 18mm Ring Probes Cylinder Head Temperature Instrument with 18mm Ring Probes and built in Voltmeter Cylinder Head Temperature Instrument with Bayonet Probes Cylinder Head Temperature Instrument with Bayonet Probes and Built in Voltmeter Cylinder Head Temperature Instrument Cylinder Head Temperature Instrument with Built in Voltmeter Cylinder Head Temperature Instrument with 18mm Ring Probes Cylinder Head Temperature Instrument with 18mm Ring Probes and built in Voltmeter Cylinder Head Temperature Instrument with Bayonet Probes Cylinder Head Temperature Instrument with Bayonet Probes and Built in Voltmeter Clock and Outside Air Temperature Degrees F Clock and Outside Air Temperature Degrees C Exhaust Gas Temperature Instrument Cylinders 4 4 4 4 4 4 6 6 6 6 6 6 ALL ALL 4 4 4 4 6 6 6 6 Price $445.95 $499.95 $544.00 $598.00 $643.00 $696.00 $464.95 $520.00 $640.00 $651.00 $760.00 $812.00 $424.95 $322.95
Displays fuel level of two separate tanks on color coded bar graph indicators and a digital readout of fuel quantity on a 4-digit display. Fully user programmable from the front panel. For use with 0-5V sensors/ transducers. Fits standard 2-1/4 mounting hole. Voltage: 9-33 VDC. Displays fuel in US gallons.
Part No. 10-00304 10-01767 10-01768 10-01769 10-01770 10-00303 Model No. FL-100-R FL-100-R (44) FL-100-R (67) FL-100-R (108) FL-100-R (711M) FL-100-6 Description Dual Fuel level Indicator for Senders with a Maximum Resistance of 300 Ohms Dual Fuel level Indicator for Senders with a Maximum Resistance of 44 Ohms Dual Fuel level Indicator for Senders with a Maximum Resistance of 67 Ohms Dual Fuel level Indicator for Senders with a Maximum Resistance of 108 Ohms Dual Fuel level Indicator for Use with Cessna Pennycap Capacitive Fuel Senders Dual Fuel Level Indicator for Senders with a DC Voltage Output of 0v-5v Price $622.00 $549.00 $545.00 $545.00 $622.00 $580.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
10-00449 CHT-100-4RP 10-01752 CHT-100-4VRP 10-00723 CHT-100-4BP 10-01754 CHT-100-4VBP 10-00454 10-01755 CHT-100-6 CHT-100-6V
Your OL-100 Oil Pressure and Temperature Indicator will provide you with years of reliable service and generally outlast the life of your aircraft.Every reading you will see displayed on your instrument has been validated at least 256 times before you see it. This all happens in less than a second. When you see the result you know the instrument is functioning correctly as it is monitored by an independent microprocessor just to ensure that it is functioning correctly. In turn the main processor validates the independent monitoring processor.
Part No. 10-01779 10-01780 Model No. OL-100-TK OL-100-TKV Description Oil Pressure and Temperature Instrument with Pressure and Temperature Senders Oil Pressure and Temperature Instrument with Pressure and Temperature Senders and Built in Voltmeter Price $735.00 $697.00
10-01756 CHT-100-6RP 10-01757 CHT-100-6VRP 10-01758 CHT-100-6BP 10-01759 CHT-100-6VBP 10-01719 10-01761 10-00439 10-00441 CT1-F CT1-C EGT-100-4 EGT-100-4P
$445.95
Exhaust Gas Temperature Instrument with Probes Exhaust Gas Temperature Instrument with 10-01762 EGT-100-4V Built in Voltmeter Exhaust Gas Temperature Instrument with 10-01763 EGT-100-4VP Probes and Built in Voltmeter 10-00443 10-00445 EGT-100-6 EGT-100-6P Exhaust Gas Temperature Instrument
10-01784
$734.00 $489.95 $742.00 $459.95 $754.00 $515.00 $782.00
Exhaust Gas Temperature Instrument with Probes Exhaust Gas Temperature Instrument with 10-01764 EGT-100-6V Built in Voltmeter Exhaust Gas Temperature Instrument with 10-01765 EGT-100-6VP Probes and Built in Voltmeter
Clock and Outside Air Temperature kit choose F or C. Includes instrument and digital temperature sensor. For experimental aircraft, TSO and STC in progress. P/N 10-01761 ..................$322.95
Fuel Pressure and Ammeter kit. Includes instrument with integrated voltmeter, solid state fuel pressure sender and 30A current shunt.
Part no. 10-01773 10-01774 10-01775 Model No. FP-100-K30 Description Price $666.00 $624.00 $624.00
Manifold and fuel pressure combination instrument. Instrument contains an integrated manifold pressure sensor and requires 0.5v-4.5v fuel pressure input (0-100 PSI at full scale) Features: Manifold Pressure 0.2-50 in.Hg Fuel Pressure 0-60 PSI Use as either manifold, fuel or both pressure instrument Programmable display formats Integrated MP sensor Remote mount FP sender External alarm output All limits and functions are user programmable P/N 10-01766........ $562.00
Fuel Pressure, Ammeter, and Voltmeter Instrument w/ External 30A Shunt Fuel Pressure, Ammeter, and VoltmeFP-100-K60 ter Instrument w/ External 60A Shunt Fuel Pressure, Ammeter, and VoltmeFP-100-K100 ter Instrument w/ External 100A Shunt
Intelligent Tachometer Kit. Works with all magneto based ignition systems. Complete with instrument, data download cables, all sensors and installation hardware. For experimental aircraft, TSO and STC in progress. P/N 10-01776 .................................. $490.95
PLEASE SEE OUR WEBSITE FOR ADDITIONAL MODELS, INCLUDING STCD MODELS.
493
$1,034.00
Easy Push Button Calibration Simple push buttons make calibration easy and accurate. No sensitive screw adjustments to make. Place the probe in tank, connect power and press EMPTY. Fill tank and press FULL. Calibration is complete. Steady Readings - Digital filtering minimizes the effects of fuel slosh providing greater accuracy. Proven Design - Designed specifically for the aircraft that are subject to harsh environments, such as vibration, temperature, and electrical noise. Probes designed for industrial applications can fail under these conditions. Proven reliability with over 10 years of history. SAE 5 Hole Bolt Pattern - Industry standard flange mount compatible. Unique Press fit installation option - Simply drill a 1/2 hole and use a rubber bushing to seal and hold the probe in place. No Moving Parts - Nothing to wear out. Output - 0 to 5 Volts Compatible Fuel Quantity Gauges - UMA P/N: 18-110-1C1 (P/N 10-01717), 18-210-1C1 (P/N 10-01717);Westach P/N: 20A4V (P/N 10-01255) & 2A7V (P/N 10-01246) and other 0-5V gauges. Mounting Options: Unique Pressfit Installation - Can be mounted in plastic tank by drilling a 1/2 hole. A rubber grommet is used to hold the probe in place. Standard SAE 5-Hole Bolt Pattern - A backing plate and seal are used to secure the probe to the tank. Standard Lengths of 12, 18, & 24 inches. Flange mount with standard SAE 5-hole pattern, or rubber grommet press fit. Probes may be shortened up to 1/2 of their measurable length. 0, 3, or 5 inch bendable section. 2 or 5 set points. Ordering: (LL-BB-SS-MM) LL - Length (12, 18, 24 inches or 25 to 48 inches custom) BB - Bendable Section (NB= non-bendable, 3B= 3 inch, 5B= 5 inch) SS - Set points (1S= Empty, 2S= Empty/Full or 5S= Empty,1/4,1/2,3/4,Full) MM - Mounting method (PF= Press Fit Bushing, FM= Flange Mount Gasket) Example: A 12, non-bendable, 2 set point probe using a press fit mounting part number would be 12-NB-2S-PF.
Description Standard, 1 Or 2 Set Point, Pf Or Fm Mounting Standard, 5 Set Point, Pf Or Fm Mounting Standard Sae 5-hole Flange Mounting Kit Advanced Npt Model, 1,2,or 5 Set Point, Npt Mount. Accessories Wire For Capacitance Fuel Probe Fuel Tank Bushing ISS Fuel Sender Gasket Part No. 10-00257 10-00258 10-00259 10-00256 Part No. 11-03996 05-01039 10-01097 Price $89.00 $139.95 $20.80 $189.95 Price $1.10 $0.88 $1.65
$477.95 $139.00
The Skysports fuel monitoring system is a capacitance system which has no float and no moving parts except the needle on the gauge. Used in hundreds of various ultralight, homebuilt, and military aircraft, these fuel systems have been very popular due to their accuracy and durability. The Skysports fuel probe electronically measures the level of fuel in the tank, and sends the signal through the wire harness to the gauge. Available for single or dual tank use and for 12 or 24 volt operation. The system includes the gauge, probe, 8 ft. wire harness, mounting hardware, & instructions. The SkySports 240-33ohm fuel systems are no longer available. They have been replaced with a new 0-5V system. These new systems, (listed below) can be used on both 12 or 24 volt aircraft. The older 240-33ohm gauge and probes are not interchangeable with the new 0-5V gauge or probes. However the installation of the systems are the same. Note:The Skysports 240-33ohm older style probes are only available as special order upon request.
INDIVIDUAL COMPONENTS
Description 2 Gauge Only 2-1/4 Gauge Only 12 Straight Probe 6 Straight Probe 24 Straight Probe 12 with 3 bend probe 24 with 3 bend probe 12 with 5 bend probe 24 with 5 bend probe Installation Kit Part No. 10-04119 10-01246 10-03758 10-03753 10-03773 10-03746 10-03774 10-03761 10-03776 10-03731 Price $55.75 $65.50 $82.75 $79.85 $84.50 $82.75 $86.75 $82.75 $86.75 $21.85
494
These Digital/Graphic Instruments are solid state and hold their accuracy over time and a range of environmental conditions. The colorful Graphic Analog display emits green, yellow, or red lights enabling the pilot to spot problems immediately without interpreting a needle. Gauges mount in 2-1/4 instrument holes.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
TACHOMETER - R-1, TACHOMETER: STCd, PMAd and TSOd as PRIMARY REPLACEMENT. Features a 210 degree graphic analog display with green, yellow, and red LEDs. Accurate 10 RPM resolution digital display. Flight Timer. Tach Timer. Peak RPM Recorder. Automatic Mag Drop Calculation. Connects to both P leads through isolators (no magnetic pick-ups required). 2 1/4 Mount. 3.65 Depth. 10 Oz. Unit. Superior sunlight viewability. Backlit. Operates from 7.5 to 30 volts @ .3 amps. Note: This instrument may come with labels on the faceplate rather than silkscreening, depending on youre a/cs required markings.. P/N 10-25200 ........... $440.95 OIL PRESSURE/TEMPERATURE - OPT-1, OIL TEMP/
PRESSURE: STCd, PMAd and TSOd as PRIMARY REPLACEMENT. OPT-1 features dual 90 degree graphic analog displays w/ green, yellow, and red LEDs. Accurate to 1 PSI and 1F Resolution. External Oil Press and Temp Transducers (no oil in the cockpit). 2 1/4 Mount. 3.65 Depth. 22 Oz. Kit. Superior sunlight viewability. Backlit. Operates from 7.5 - 35 volts @ .3 amps. Note: This instrument may come with labels on the faceplate rather than silkscreening, depending on youre a/cs required markings. P/N 10-25205 ........... $499.00
STCd, PMAd - EGTs, CHTs TIT, Oil Temp, OAT, Carb. Temp + others, up to 8 channels. Manual and Auto Diagnostics (Scan) Modes. Auto Detects the hottest EGT or CHT. Factory-set EGT Over-Temp Limit (1650F). SR-8A Factory-set EGT Under-Temp Limit (1100F). Factory(SINGLE set CHT Over-Temp Limit (500F). Differential Limit set DISPLAY) from back panel (95F or 195F). Selectable Scan Rate + Number of Channels to be Scanned. 2 1/4 Mount. 5.35 Depth. 16 Oz. Instrument. 1 F Resolution. Accuracy; 1/2%. Superior Sunlight Viewability. Backlit. Operates from 7.5 to 35 volts @at .3 amps.
Model Description Part No. Price SR-8A SR-8A Instrument only (no probes or cables) 10-25220 $425.99 4 Cyl. SR-8A Package w/ 4 p-110 EGT probes, 4 SR-8A-4 10-00599 $916.00 P-100 CHT probes, 8 ea 6 Cables (uses all 8 inputs) 6 Cyl. SR-8A Package w/ 6 P-110 EGT probes, 2 SR-8A-6 10-00603 $915.00 P-100 CHT probes, 8 ea 6 Cables (uses all 8 inputs)
VA-1A-XX, VOLTS/AMP - STCd, PMAd as PRIMARY REPLACEMENT. (For use with External Shunt. Discharge and High Voltage Warning Lights. 100 amp capability (or order VA-1A-300 for 300-amp capability). .1 volt and .1 amp Resolution. Accuracy: 1%. 2 1/4 Mount. 2.5 Depth. 9 Oz. Unit. Superior sunlight viewability. Backlit. Operates from 7.0 to 40 volts @ .1 amp. P/N 10-01378 ................VA-1A-50 (S-50 external shunt) ...........$369.95 P/N 10-01394 ................VA-1A-300 (S-300 external shunt) .......$378.95 P/N 10-03207 ................RSVA-3 Remote Switch .........................$89.75
The UBG-16 input channels. Any of the following options can be added at any time. Each option uses 1 input channel unless otherwise noted.
UBG-16 features include: Sixteen input channel capability. Any channel may be set to display EGTs and CHTs, TIT, and Oil Temp in either digital or bar graph display, O.A.T, Carb. Temp, Cowl Temp, Other Temp, Oil Pressure, Fuel Pressure, Manifold Pressure, Gyro Pressure, R.P.M.,Fuel flow, Bus Voltage or Amps. Engine Analysis is performed automatically with sixteen pilot programmable Over-Temp limits and sixteen UnderTemp limits, a differential limit and a shock-cooling limit. Note: Unit is STCd/PMAd. Can only be used as a secondary engine monitor. For primary see the MVP-50.
Description 4-Cylinder Package. Includes 4 EGT probes, 4 CHT probes, 8 ea 6 harnesses and Data Recorder (MUX-8A) 6-Cylinder Package. Includes 6 EGT probes, 6 CHT probes, 12 ea 6 harnesses, and Data Recorder (MUX-8A) Software for analyzing downloaded software UBG-16 Remote Head option.. Must be purchased at the Remote same time as the UBG-16 UBG-16Electronics International Ubg-16 Engine Analyzer 4 Cylinder 4G-MEM UBG-16Electronics International Ubg-16 Engine Analyzer 6 Cylinder 6G-MEM Model UBG-164M UBG-166M EGView Part No. Price 10-00593 $1,638.00 10-00594 $1,635.00 10-01219 10-02763 $125.00 $105.95
Description Flow Transducer Use w/ engine-driven fuel pumps up to 350 HP. 1/4 female NPT, .6-70+ GPH, .6 PSI drop @ 30 GPH, 2.3 PSI drop @ 60 GPH TRANSDUCER For 350 to 550 HP engines or gravity-feed engines, 1/4 NPT, 2 to 125+ GPH, .05 PSI drop @ 20 GPH, .2 PSI drop @ 40 GPH. Secondary Fuel Pressure Includes PT-30GA Pressure Transducer. (Can be used with The FM-FP UBG-16 and also with the FP-5L (Fuel Flow/ Pressure w/ GPS Interface instrument) Secondary Oil Pressure Includes PT-100GA FM-OP Pressure Transducer. (For use with UBG-16 or FP-5(L). Secondary RPM Connects directly to the Mag FM-RPM Switch. (For use with UBG-16 or FP-5(L) Secondary Volts/Amps w/S-50 Shunt Volts uses 1 input channel and Amps uses 1 input channel (i.e., FM-VA monitoring volts and amps require the use of two of the UBG-16s input channels. FM-GYROGyro Vacuum Includes Pressure Transducer. Secondary Manifold Pressure Includes Pressure FM-MP Transducer.
Part No.
Price
10-25337 $249.00
10-25336 $224.95 10-04818 $175.00 10-25342 $214.95 10-25339 $175.00 10-25338 $217.95
495
Positively the best Fuel Flow/Horsepower Instrument there is! Nothing else even comes close. The FP-5Ls High-Powered Features Include: HORSEPOWER, to 1 percent hp. No other fuel gauge provides this! FLOW, displayed in Gallons, Pounds, Liters or British Gallons. AUTOMATIC K-Factor Calibration for UNSURPASSED ACCURACY. FUEL DISPLAYS: Used for Flight, Used Since Fill Up, MPG, Fuel Required to. Destination, Fuel Remaining, Time to Empty. SCAN MODES: Manual and Automatic. RECURRING FUEL USED ALARM Pilot Programmable. 2 LOW FUEL ALARMS Pilot Programmable w/ Red Warning LED. FUEL REMAINING displayed to 1/10 Gal. AUTOMATICALLY CALCULATES AND DISPLAYS Time to Empty, Fuel Req to Dest, and Fuel Reserve.. Displays Nautical and Statute Miles per Gallon. Multiple Data Outputs & Inputs, Handhelds & Panel Mounts. One-of-a-kind AUXILIARY Channel can be used to monitor an additional function (choose one):EGT, TIT, CHT, OAT, Carb Temp, Oil Temp, Cowl Temp, Fuel Pressure, Gyro Vacuum, Manifold Pressure, Volts or Amps. Specs: 2-1/4 mount, 3.65 deep, 28 oz. pkg, Backlit for Night Operation, Superior Sunlight Viewability, External Warning Line. Operates from 7.5 to 30 volts @ .3 amps. Models FP-5L FP-5L w/ FT-60 & Pressure FP-5L-60 FP-5L-90 Description Fuel Flow w/ Horsepower & GPS input/output (instrument only; no transducers) Includes FT-60 Flow Transducer (for engines up to 350 HP) & PSI Transducer Fuel Flow w/ Horsepower & GPS input/output, includes FT-60 Flow Transducer Fuel Flow w/ Horsepower & GPS input/output, includes FT-90 Flow Transducer Part No. 10-01217 10-25310 10-01045 10-01050 Price $575.00 $917.00 $598.00 $563.00
FP-5L FUEL FLOW, PRESSURE, HORSEPOWER AND GPS PMAd & STCd PRIMARY REPLACEMENT INSTRUMENT
The entire line of Electronics International digital instruments offers precise readings at exceptional prices. All gauges are accurate to 1%. They are FAA-approved under STC No. 1626NM. Furnished complete with all probes & leads.
SigleDescription Engine: E-1 Single-Channel EGT or CHT, STCd, TSOd, PMAd 2 1/4 Mount, 2.5 Depth, 12 Oz. C-1 Kit, EGT, CHT or TIT, PRIMARY REPLACET-1P MENTS STCd, TSOd, PMAd w/ OverE-1P Temp Warning Light, 2 1/4 Mount, 2.5 C-1P Depth, 12 Oz. Switchable from EGT to CHT (1 of ea), EC-1 STCd, TSOd & PMAd. 2 1/4 Mount, 2.5 Depth, 16 oz STCd, TSOd, PMAd. - EGT/OAT/CHT Ice EAC-1 Zone Warning Light (from 10 to 39 degrees Celsius), STCd, TSOd, PMAd - CARB TEMP/OAT CA-1 w/ Ice Zone Warning Light. (from 10 to 39 degrees Celsius) OAT w/ Ice Zone Warning Light, STCd, A-1 PMAd, TSOd (light comes on between 10 and 39 degrees F). E-4 EGT and CHT instruments, STCd, TSOd and PMAd. Four Channels (EGT or CHT) C-4 E-6 EGT and CHT instruments, STCd, TSOd and PMAd Six Channels C-6 Part No. 10-01355 10-01338 10-01373 10-02762 10-01339 10-01358 10-00806 10-01351 10-01307 10-01356 10-01348 10-01357 10-01350 Price $279.00 $276.00 $307.95 $319.95 $307.95 $364.00 $419.00 $339.00 $249.95 $557.00 $554.00 $649.00 $641.00
E.I. INSTRUMENTS
10-01355
10-01339
10-01348
10-01373
SigleDescription Part No. Price Engine: 10-00807 $505.00 EC-1P 3-1/8 STCd/PMAd/TSOd PRIMARY replacement Instruments w/ OverTemp TC-1P Lights. 10-02736 $505.00 FOR TWINS - Orders for following instruments MUST specify type of probes: EGT hose clamp, TIT (hose clamp, 1/8 NPT, 1/4 NPT or 7/16 x 20). CHT, and OverTemp Limits. Dual Display EGT (1 L & 1 R), Over-Temp 10-01447 $599.00 EE-1P Lights, 3-1/8 mount Dual Display CHT (1 L & 1 R), OverTemp 10-02735 $598.00 CC-1P Lights, 3-1/8 mount Dual Display TIT (1 L & 1 R), OverTemp 10-02733 $600.00 TT-1P Lights, 3-1/8 mount EC-1PT TC-1PT Dual Display 1 EGT & 1 CHT w/ OverTemp Lights, 3-1/8 mount Dual Display 1 TIT & 1 CHT w/ OverTemp Lights, 3-1/8 mount 10-02731 10-02732 $599.00 $585.00
FOR TWINS - Not Primary Replacement Instruments, but STCd, PMAd, TSOd. Same order requirements and specifications as above: E-2 C-2 EC-2 (one display, switchable from left to right engine, either EGT or CHT) (one display, switchable from EGT, L/R and CHT L/R). 10-00098 10-01661 10-01359 $498.00 $589.00 $641.00
496
replaces over 15 Engine Instruments and 50 Functions in a single, full color, enhanced TFT glass display instrument. It features excellent viewability, even in direct sunlight. The MVP-50 is an unrivaled Engine and Aircraft System Monitor with an easy-to-read and easy-to-use format. There are Pilot-Programmable colors, ranges and limits and a voice alarm for each instrument displayed. Its System Page displays trims, flaps, wheel status lights, many system parameters and annunciators. This is the most powerful engine and system analyzer on the market, featuring the following displays: Bar Graph (with Scan and Hottest Cylinder modes), Rich-of-Peak, Lean-of-Peak, Full Digital, Normalized and Differential. The MVP-50Ps instant red and yellow visual warnings, as well as voice annunciators for all Programmed Limits, eliminate the need to constantly scan an entire panel for possible problems. In-Flight Data: The MVP-50P provides many Flight Data Screens to reduce cockpit clutter and pilot workload. Some of these screens are: Fuel Management, Timers, Clocks and Date, Weight and Balance, Data Recording, Custom Checklists (Start, Taxi, Run-up w/ Mag Drop, Take Off, Landing, Emergency and more!), Custom Flight Plans, General Information (Aircraft Performance, Engine Diagnostics, VSI Lights, Airspeed, VFR Minimums, Altitude Table, Light Gun Signals, Transponder Codes, Frequencies, Real-Time Out (providing telemetry for UAV racers, etc.), plus additional Screens, including: Flight Log, Max Data Log, Min Data Log and others. And its easy to create your own Custom Screens and download them to the MVP-50P through its USB port. Compatible with OP Technologies and Chelton. EGView Charting Software is also available for use with the MVP-50P. Other Functions Included: Help Screen; EGT & CHT Differentials; Shockcooling; Horsepower; Weight & Balance Data and Graph; GPS Interface and Data; Fuel Efficiency; Fuel Used for Trip; Fuel Used Since Fill Up; Time to Empty; Distance to Empty; Fuel; Time and Distance to Way Point; Fuel Reserve; Time Reserve; Distance Reserve; Up and Down Timers; Flight and Tach Timers; Engine Hours; Date; Local and Zulu Time; Voice Warnings; Data Recording: selectable .33 6 min., 665 hours @ 6 seconds!
Experimental MVP-50P-4 MVP-50P-6 MVP-50P-7 MVP-50P-8 Description 4-Cylinder Pkg 6-Cylinder Pkg 7-Cylinder Pkg 8-Cylinder Pkg 8-Cylinder MVP-50P-8W Water-Cooled Pkg Part No. 10-01192 10-01191 10-03174 10-03175 Experimental Description Price MVP-50P-9 9-Cyl. Radial Pkg $4,163.00 $4,571.00 MVP-50P-12W 12-Cylinder Water-Cooled Pkg $4,675.00 $5,443.00 MVP-50P-4- 4-Cyl. Aerosance Pkg FADEC 10-03178 $4,605.00 MVP-50P-6- 6-Cyl. Aerosance Pkg FADEC Part No. Price 10-03176 $5,442.00 10-03177 $4,715.00 10-03173 $4,163.00 10-03172 $4,163.00 Certified Description MVP-50P-4-C 4 Cylinder Certified MVP-50P-6-C 6 Cylinder Certified MVP-50P-8-C 8 Cylinder Certified Part No. Price 10-03867 $4,997.00 10-03868 $5,398.00 10-03869 $6,268.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
497
ASC-5A - Displays Local & Zulu Time in 12 or 24 hr format, Up & Down Timers w/ alarms, Altitude (as seen by ATC), and OAT. Several programmable alarms, including Assigned Altitude, Level Off, Deviation Alarm and an Approach Alarm + a recurring alarm to alert you at a programmable interval, for checking fuel. P/N 10-02914 ..... $483.00
SC-5 - Displays Local (12 or 24-hour format) & Zulu Time. 10-year Lithium battery keeps the clock running even if the a/c battery is removed. Displays an Up Timer, which starts running when the engine is started, acting as an automatic Flight Timer. The Up Timer may be started, stopped or reset. Recurring Alarm may be set to alert you at appropriate time intervals, e.g., if set for 30 minutes, there will be an alarm at 30 minutes, 60 minutes, 90 minutes, etc. Alarm can be used as a reminder to check fuel level or switch tanks at set time intervals. P/N 10-01612 ..... $289.00 FUEL LEVEL INSTRUMENTS
For TC holders, STC holders or Experimental Aircraft No STCs. FL-1CA Fuel Level Instrument . The FL-1CA is to be used w/ EIs P-300C Capacitive Fuel Probe (custom order probe length from 6 to 20). The FL-1CA features a 210 degree Arc of LEDs for an excellent field of vision reference and a Digital Display. Can display in gallons (one or one-half gallon increments), pounds or liters. Specifications: 2 1/4 Mount, 3.65 Depth, 10 Oz. Unit, Viewable in direct sunlight and Backlit for night operations. Model Description Part No. Price
The FL-1CA is to be used w/ EIs P-300C capacitive fuel probe (order from 6 to 20 long). 210 degree LED arc + a digital display. Can display in gallons (one or one-half 10-00386 gallon increments), pounds or liters. Specifications: 2 1/4 Mount, 3.65 Depth, 10 Oz. Unit, Viewable in direct sunlight and Backlit for night operations.
$32.95 $35.00
$879.00
10-03202 $3,550.00
FL-1CA
$399.95
10-03249
Model
10-03264
10-03265
10-03267
10-03268
Price $790.00
12V The FL-2RA-12 designed to be used on a 12-volt system w/ resistive fuel probes. Features a 210 degree FL-1RA- LED arc + a digital display. Max resistance between 10-03209 $399.95 90-270 ohms. Can display in gallons (one or one-half 12/24 24V gallon increments), pounds or liters. Specifications: 2 1/4 Mount, 3.65 Depth, 10 Oz. Unit, Viewable in 10-00388 $415.95 direct sunlight and Backlit.
The FL-2 is a fuel level instrument featuring dual 90 degree LED arcs + a digital display. The FL-2 can display in gallons (one or one-half gallon increments), 11-03788 pounds or liters. Specifications: 2 1/4 Mount, 3.65 Depth, 10 Oz. Unit, Viewable in direct sunlight, Backlit, Operates from 7.5 to 35 volts at .3 amps.
FL-2CA
$394.00
Description Part No. RPM INSTRUMENT, TSOd, PMAd (no STCs). Digital 1% Resolution Display + 210 degree LED arc disR-1-N1 play with green, yellow and red LEDs. 2 1/4 Mount, 10-03249 3.65 Depth, 10 Oz. Viewable in direct sunlight, Backlit, Operates from 7.5 to 30 volts @ .3 amps. RPM Instrument displayed in RPM. TSOd, PMAd (no STCs). Digital 10 RPM Resolution Display + 210 R-1-N2 10-03264 degree LED arc display with green, yellow and red LEDs. 2-1/4 Mount, 3.65 Depth, PRESSURE OR TORQUE INSTRUMENT, TSOd, PMAd (no STCs). 1 PSI or 1% Resolution + 210 deM-1T 10-03265 gree LED arc display with green, yellow and red LEDs. 2 1/4 Mount, 3.65 Depth, 10 Oz. Instrument. Backlit. INERT-Turbine Temperature Instrument IN Celsius. TSOd/PMAd (no STCs). Digital display (1 degree C M-1-ITT 10-03266 resolution) + 210 degree LED arc with green, yellow
$790.00
$790.00
$790.00
a fuel featuring dual 90 FL-2RA- The FL-2 is analog level instrumentdigital display. The degree LED displays and a 11-03789 12/24 FL-2 can display in gallons (one or one-half gallon increments), pounds or liters. FL-2 Specifications: 2 1/4 FL-2RA- Mount, 3.65 Depth, 10 Oz. Unit, Viewable in direct sun11-07104 7.5 to 35 24 light, Backlit, Operates from the time ofvolts at .3 amps. Please specify 12/24 volt at order.
$398.00
$389.95
and red LEDs. 2 1/4 Mount, 3.65 Depth, 10 Oz. Turbine Outlet Temperature INC. TSOd/PMAd (no M-1-TOT 10-03267 $790.00 STCs). OPT-1- AC BUS VOLTAGE & FREQUENCY, TSOd/PMAd 10-03268 $790.00 FV-60 (no STCs). The -60 instrument is for a 60 Hz. bus and the -400 instrument is for a 400 Hz. bus. AcOPT-1- curate Digital Display can be switched between Volt10-03269 $790.00 FV-400 age and Frequency, displays in Volts and Hz. 2 1/4 Mount, 3.65 Depth, 10 Oz. Instrument.
498
A remote switch may be used to upgrade many single-channel E.I. instruments to multi-channel EGT and/or CHT engine analyzers. This is an excellent way to insure your engine is operating properly. Specifications for all switches: Body - 1x 1x 1.5 depth, front panel - 2x 1.15, STCd / PMAd RS-4-1S - Upgrades any unit to read four channels of EGT or CHT, Package includes: Unit, (3) 6 cables, (3) probes. Specify probe type with order. P/N 11-01688 .........$290.95 RS-4-2S - Upgrades any two channel unit to read four channels of EGT and CHT, Package includes: Unit, (6) 6 cables, (3) EGT probes, (3) CHT probes P/N 11-01689 .........$419.95 RS-6-1S - Upgrades any unit to read six channels of EGT or CHT, Package includes: Unit, (5) 6 cables, (5) probes. Specify probe type with order.P/N 11-01690 .......$394.50 RS-6-2S - Upgrades any 2 channel unit to read six channels of EGT and CHT, Package includes: Unit, (10) 6 cables, (5) EGT probes, (5) CHT probes P/N 11-01691 .........$617.00 RS-8-1S - Upgrades any unit to read eight channels of EGT or CHT, Package includes: Unit, (7) 6 cables, (7) probes. Specify probe type with order. P/N 11-01692 .........$468.95 RS-12-1S - Upgrades any unit to read 12 channels of EGT or CHT, Package includes: Unit, (11) 6 cables, (11) probes. Specify probe type with order. P/N 11-01693 .........$666.00 REMOTE SWITCHES for use w/ EI 1 or 2 channel EGT/ CHT instruments. STCd, PMAd Electronics International gauges are available to replace your Primary Engine Instruments. Available for single and twin engine applications. RS-5-1PS - Upgrades any primary TIT/CHT unit to read 4 channels of EGT or CHT, Package includes: Unit, (4) 6 cables, (4) probes. 15 oz. kit Specify probe type with order......................P/N 11-01694 ........ $365.95 RS-5-2PS - Upgrades any primary TIT/CHT unit to read 4 channels of EGT and CHT, Package includes: Unit, (8) 6 cables, (4) EGT probes, (4) CHT probes. 2.2 lb. kit ...........................P/N 11-01695 ........ $490.95 RS-7-1PS - Upgrades any primary TIT/CHT unit to read 6 channels of EGT or CHT, Package includes: Unit, (6) 6 cables, (6) probes. 27 oz. kit. Specify probe type with order. ...............P/N 11-01696 ........ $457.95 RS-7-2PS - Upgrades any primary TIT/CHT unit to read 6 channels of EGT and CHT, Package includes: Unit, (12) 6 cables, (6) EGT probes, (6) CHT probes. 3.2 lb. kit .......................................P/N 11-01697 ........ $666.00
REMOTE SWITCHES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PROBES
The RC-1 is a Tach Drive cap. The thread pattern is 7/8 x 18 and fits most Tach Drive Lines. P/N 10-04836 .................. $4.95
499
Single Engine - 2.25 Bezel Protect Your Engine By: Saving Fuel On Every Flight By Leaning Accurately And Safely Revolutionary New Leaning Process See Lean Peak In Order And Temperature Spread Seeing Simultaneous EGT, CHT, TIT Bars And Temperatures Save Time Trouble-Shooting Continuous Probe Diagnosis That Confirms System Integrity Extensive List Of Primary Approved Aircraft Models SD Card Software Updates FAA & TC Primary STC EGT, CHT, & TIT Also available with Carburetor Temperature and/or for G1 Field Update Kit, see Accessories.
Description 4 Cylinder Standard 6 Cylinder Standard 4 Cylinder Turbo 6 Cylinder Turbo Carburetor Temp. Option Head Only Part No. 10-04916 10-04917 10-04918 10-04919 Accessories 10-04922 10-04921 Price $1,235.00 $1,365.00 $1,365.00 $1,495.00 $176.00 $1,034.00
GEM PROBES
GEM 602 Wire Harness .....................P/N #2870 EGT Probe ..............................P/N #2852 CHT Spring Probe ...................P/N #2853CHT Gasket Probe ...................P/N #2855 CHT Adapter Probe* ...............P/N #2856 CHT Probe**............................P/N 10-03576 ........... $199.00 2870 .............$69.85 /ea. 2852 .............$69.85 /ea. 10-00827 ......$69.50 /ea. 2855 ...........$178.50 /ea. 2856 ............$189.00/ea.
*Use with factory spring probe **Use with 3/8 x 24 threaded factory probe
G2 Series Single Engine Color Monitor - Complete System - 2.25 Bezel Save Fuel, Save Money, Save Your Engine! Affordable Engine Monitoring you cant afford to be without. Top reasons to install a G2: Best lean of peak process in the industry The only nozzle balance analysis, the key to lean of peak The only probe diagnostic scree Comprehensive data log - windows files SD card Over the web software updates - constant improvement GEM plug compatible - easy install Best technical support
Description 4 Cylinder, Single Engine, 2.25 Bezel 6 Cylinder, Single Engine, 2.25 Bezel 4 Cylinder Turbo, Single Engine, 2.25 Bezel 6 Cylinder, Single Engine, 2.25 Bezel 4 Cylinder Turbo, Dual Engine, 2.25 Bezel 6 Cylinder, Dual Engine, 2.25 Bezel Accessories 4 or 6 Cylinder G2 Upgrade Head Only Part No. 10-04924 10-04926 10-04927 10-04928 10-04929 10-04931 10-04932 10-04933 Price $2,093.00 $2,275.00 $2,223.00 $2,405.00 $2,353.00 $2,535.00 $1,684.00 $1,294.00
The E3 universal engine monitor combines in one compact 2.25 format instrument all that is needed to monitor most smaller aircraft engines from two-stroke ultralight engines to medium sized four strokes such as from Rotax, Continental and Lycoming. Also most automotive engine conversions can benefit from the use of the E3 engine monitor. P/N 11-06442 .......$280.00
The original GEM was a solitary player. The G3 instrument has two control knobs that operate combination rotary and push button switches. The top knob in general controls screen selection while the bottom knob controls items within the given screen. Each screen assigns its own functional needs to the controls that may change depending on context. A screen may also label the controls with guidance information like Push to exit. The G3 is also designed to expand and grow with the times. Less than half of its true potential has been released at this time. The instrument can be updated to acquire new features by loading the SD card via the internet. Another great feature is why not have the G3 instrument diagnose itself? Then you dont have to disassemble the airplane or even touch the wiring. The probe diagnosis page indications are in green for normal readings and red for readings that fail the criteria set at the bottom of the screen. System Monitors: EGT, CHT, Fuel Flow, RPM, Manifold Pressure O, il Temp/Pressure, OAT, TIT, Carb Temp, HP%, Prop Balance, Clock/Calendar GEM G3 4 Cylinder 2.25 ................... P/N 10-03195 ..............$2,985.00 GEM G3 4 Cylinder Turbo 2.25 ......... P/N 10-04685 ..............$3,330.00 GEM G3 6 Cylinder 2.25 ................... P/N 10-03196 ..............$3,215.00 GEM G3 6 Cylinder Turbo 2.25 ........ P/N 10-04686 ..............$3,561.00 GEM G3 4 Cylinder 3-1/8.................. P/N 10-04687 ..............$3,892.00 GEM G3 6 Cylinder 3-1/8.................. P/N 10-04688 ..............$4,030.00 GEM G3 6 Cylinder Turbo 3-1/8 ....... P/N 10-04689 ..............$4,334.00 Upgrade from GEM 602, 603, 610 to 63 4 Cylinder Upgrade ............................ P/N 10-03198 ..............$2,295.00 6 Cylinder Upgrade ............................ P/N 10-03197 ..............$2,491.00 A new concept in fuel flow computers, True Flow 500 is designed to give pilots a simple and efficient way of reading fuel information directly on the GPS fuel pages. Eliminates tedious installation and set-up proce and set-up proceuredures that are required for other fuel flow computers. Install True Flow 500 on top of the engine and connect fuel lines, GPS power, ground and RS232 RX input. Works on fuel infected or carburated engines, but not on carburated engines with a fuel return line. Many other STCs for installation on certificated aircraft. Unit is TSOd for Beechcraft Aircraft Only. P/N 11-01913 .........$743.00
Graphic Engine Monitor Twin Engine - Normally Aspirated or Turbo-Charged with Data logging for 2, 4, 6, 7, 8 and 9 Cylinder. Designed for twins, the GEMINI 1200 has all of the same advanced features as the GEM 610. ALL NEW 1200 UNITS ARE FACTORY CALIBRATED.
Features: Display up to 30 temperatures. IAT Temperature. Side-by-side display of Left/Right or Front/Rear Engines. 4 digit readout of any EGT, CHT, TIT, OAT and IAT. Primary Instrument Replacement STC
Part No. 10-18815 10-18820 10-18825 10-18830 10-18835 10-18840 10-02142 Model GEMINI GEMINI GEMINI GEMINI GEMINI GEMINI 1200-021 Description Twin Engine, 4 cyl., normal asp. Twin engine, 6 cyl., normal asp. Twin Engine, 4 cyl., turbo (1T) Twin Engine, 4 cyl., turbo (2T) Twin Engine, 6 cyl., turbo (1T) Twin Engine, 6 cyl, turbo (2T) Insight OAT Probe Price $3,330.00 $3,606.00 $3,983.00 $4,189.00 $4,353.00 $4,539.00 $139.85
GEM-610 SYSTEMS
Graphic Engine Monitor Single Engine - Normally Aspirated or Turbo-Charged with Data logging for 4 or 6 Cylinder. ALL NEW GEM 610 UNITS ARE FACTORY CALIBRATED. Features: Selectable Fahrenheit/Celsius Temperatures. Normalization Mode: allows easy observation of any change in EGT . during cruise flight. Lean Mode: is used during cruise to identify the leanest cylinder. See www.aircraftspruce.com for a complete list of features. Specifications: Size: 2-1/4 panel mount. Weight installed is 3 lbs. Power: 10-30VDC. Single Engine 4-cyl. GEM-610 ................P/N 10-18845 ..... $1,894.50 Single Engine 6-cyl. GEM-610 ................P/N 10-18846 ..... $2,123.00 Single Engine 4-cyl. turbo GEM-610 ......P/N 10-18805 ..... $2,031.00
500
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
10-28080 $3,820.75
EDM-760-6C with Fuel Flow 201 3-1/8 (Fuel Pump) 10-00640 $5,010.75 EDM-760-6C with Fuel Flow 231 3-1/8 (Gravity Fed) 10-02851 $5,010.75 EDM-760-4C 3-1/8 (No Fuel Flow) 10-28085 $3,944.00
EDM-760-4C with Fuel Flow 201 3-1/8 (Fuel Pump) 10-00639 $4,160.75 EDM-760-4C with Fuel Flow 231 3-1/8 (Gravity Fed) 10-02847 $4,160.75
Trade-in Price for EDM 700. Basic Gem, (Use old Sys10-03611 tem wire harness and EGT/CHT/TIT Probes) Accessories Description EDM 700 Transducer (Fuel Pump) EDM 700 Transducer (Gravity) JPI EDM RPM Option Part No. 10-27089 10-27094 10-01720
ACCESSORIES
Description Part No. 10-27112 10-27113 11-09232 11-09233 Price $36.75 $69.00 $343.95 $545.00 EDM PC Interface Cable + EZ Trends (Free with new instrument) Fuel Flow Without Transducer Fuel Flow With Transducer
All Systems which include Fuel Flow come with Transducers. 201 Transducer is for Aircraft with Fuel Pumps. 231 Transducer is for Gravity Fed Aircraft.
Functions included on EDM-740: All in One Engine Instrumentation that works. Start saving fuel today with JPI's exclusive Over lean (LOP) feature. All functions also show up in large digital display. Same as the EDM-830 plus now with Fuel Level and Fuel Pressure. User selectable landscape or portrait mode. For experimental aircraft only. RPM Propeller, MAP Manifold Pressure, % HP Percent of Horse Power, EGT Exhaust Gas Temp., CHT Cylinder Head Temp, O-T Oil Temperature, O-P Oil Pressure, OAT Outside Air Temp., VDC Voltage, GPH Gallons per Hour, REQ Required to destination, USD Fuel used, H:M Endurance, MPG Miles per Gal, CLD Shock Cooling on all cylinders, DIFF Gami spread, USB Memory stick Data Recording, EZTrends Graphing program Optional functions:TIT Turbine Inlets Temp., F-P Fuel Pressure, CDT Compressor Discharge., AMP Current amps, CRB Carburetor Temp , L-Tank Fuel Quantity, level, R-Tank Fuel Quantity, level EDM 740 4C Experimental ................. P/N 11-08058 ........... $2,699.00 EDM 740 6C Experimental ................. P/N 11-08059 ........... $2,925.00
501
JPI EDM-730/830
LF, Lean Find, automatically finds first & last cylinder to peak. Displays histogram of each cylinder that peaks.
True TFT Transflective Custom Display Display brightness increases with ambient brightness, always sunlight readable. All gages have a Variable Scale and alarm limit to fit your engine. New form factor, panel size: 6w X 4h X 2.9d. Records all engine parameters at 2 to 255 second intervals. Plot the data with EZplot. All probes and transducers supplied. High Flow transducer (120 GPH) included in EDM930T Compatible with and transmits RS-232 data to most MFDs, also sold less the display. PISTON FUNCTIONS: Tachometer/Hobbs Manifold Air Press 6 EGT/CHT Oil Temp. Oil Press Fuel Quantity Fuel Press OAT Carb. Temp TIT, TIT-2 CDT GMT Votls/Amps 1-2 Differential EGT Shock cooling GPH Fuel remaining Fuel Endurance Fuel required to GPS waypoint Fuel used Percent of horse power Receives data from any GPS and transmits data to any GPS. FAA TSO PRIMARY
Description JPI EDM-930 (4) Cylinder Primary STC JPI EDM-930 (4) Cylinder Primary STC 4 Tank System JPI EDM-930 (4)Cylinder Primary STC No Tank System JPI EDM-930 (6) Cylinder Primary STC JPI EDM-930 (6) Cylinder Primary STC 4 Tank System JPI EDM-930 (6) Cylinder Primary STC No Tank System JPI EDM-930 (7) Cylinder Primary STC JPI EDM-930 (8) Cylinder Primary STC JPI EDM-930 (9) Cylinder Primary STC Part No. 10-02111 10-04731 10-04909 10-02112 10-04732 10-04911 10-02632 10-02633 10-02634 Price $5,467.00 $6,090.00 $5,136.00 $5,900.00 $6,524.00 $5,583.00 $7,893.00 $8,172.00 $10,082.00
The EDM-800 instrument has all the advanced functions of the EDM700, but incorporates some new features that can only be found on JPI products. No longer do pilots have to waste time looking up and guesstimating the present percentage of horsepower (HP). There are new easily readable digits located at the top of the EDM display which continually show the percentage of horsepower being used, and can also display RPM. What is truly unique about this new feature is that it can also display HP over lean. HP can be displayed for either carbureted or injected engines, even if they are turbocharged. Now you can be sure that you are within the horsepower limits of your engine, and in IFR conditions, this can be quite a task. At the present time HP is only available on single engine 4 and 6 cylinder engines. The EDM-800 calculates percent of horsepower in an Over lean condition. Lycoming & Continental horsepower charts stop at peak EGT on the first cylinder to peak. Gami has developed a method of going over lean on all cylinders. When you are over lean, every ounce of fuel is burned and used to create horsepower and heat. Cooling is accomplished by excess air in the combustion chamber. JPI has developed an algorithm to calculate horsepower based on fuel consumption and other factors. To obtain HP in this over lean condition you must have an EDM-800 engine analyzer which includes fuel flow, RPM, MAP, OAT, Memory and Gami tuned injectors. In addition to JPIs HP function, the EDM-800 also has a Memory Module that can store up to 25 hours of engine data, which can be downloaded to a laptop or palmtop PC. When using the memory function, all functions of the EDM will be recorded, including Fuel Flow and HP. Description Part No. Price EDM-800-4C w/Fuel Flow 201 2-1/4(Fuel Pump) 10-02854 $2,779.50 EDM-800-4C w/Fuel Flow 201 3-1/8(Fuel Pump) 10-02021 $3,077.00 EDM 800-4C w/Fuel Flow 231 2-1/4(Gravity Fed) 10-02855 $2,779.50 EDM 800-4C w/ Fuel Flow 231 3-1/8(Gravity Fed) 10-02843 $3,077.00 EDM-800-6C w/Fuel Flow 201 2-1/4(Fuel Pump) 10-02856 $3,395.75 EDM-800-6C w/Fuel Flow 201 3-1/8(Fuel Pump) 10-02857 $3,693.25 EDM 800-6C w/Fuel Flow 231 2-1/4(Gravity Fed) 10-02859 $3,395.75 EDM 800-6C w/Fuel Flow 231 3-1/8(Gravity Fed) 10-02858 $3,693.25
The EDM-960 is the latest graphic engine analyzer for Piston Engine Twins from JP Instruments. The EDM-960, STCd as Primary engine instrument, takes the best from their EDM-760 and adds total engine display monitoring including Tach, % Horsepower, Hobbs, Manifold Pressure, EGT, CHT, Oil Pressure, Oil Temp, Fuel Flow, Outside Air Temp, Volts, and Amps plus optional Fuel Pressure, Fuel Quantity, and Turbine Inlet Temp. Each individual engine display has a scale and alarm limit to fit your particular airplane. As with the popular EDM-760, the EDM-960 has internal memory that records all engine parameters that can be recalled and displayed on your computer to keep track of the health of your engine. Plus: warnings for shock cooling and excess temperatures, leaning assist for both lean of peak, and rich of peak. Description JPI EDM-960-6C Twin JPI EDM 960-6C Twin 4 Tank System JPI EDM 960 6C No Tanks JPI EDM-960-4C Twin JPI EDM 960-4C Twin 4 Tank System JPI EDM 960 4C No Tanks JPI EDM-960-7C Twin JPI EDM-960-8C Twin JPI EDM-960-9C Twin Part No. 10-03726 10-04734 10-04914 10-03727 10-04733 10-04913 11-07750 11-07751 11-07752 Price $15,782.00 $16,625.00 $15,195.00 $14,526.00 $15,514.00 $13,956.00 $18,041.00 $18,525.00 $22,582.00
502
CM WP ME HA AP LG EP CS IN EL AV TO
These compact engine instruments from have a bright red display and feature central remote and individual alarms on all gauges. The gauges are easily stackable in a homebuilt aircraft panel, and come complete with sensors. Specify voltage. NOT FAA APPROVED. Tachometer - Features quartz crystal and accuracy of 1 RPM. Resolution is 10RPM and includes red line alarm. Specify engine and magneto models, number of cylinders, voltage, and red line. P/N 10-24900 ........................ $420.75 Manifold Pressure - Features resolution of 0.1 inches mercury, accuracy of 0.1 Hg, solid state sensor, and over boost alarm. Range: 0-50. P/N 10-24910 ....................... $297.50 Outside Air Temperature (O.A.T.) - Features resolution of 1 and has range of -40 to 195F. P/N 10-24940 ....................... $250.75 Oil Temperature - Features resolution of 1 and over temperature alarm of 235 F. P/N 10-24960 ....................... $250.75 Volt/Ammeter - Features resolution alarm. Volt/100 amp-14V........................P/N Ammeter Shunt - (100 Amp) .......P/N Volt/100 amp-28V........................P/N of 0.1 volts/amps and discharge 10-24920 ........................ $250.75 10-24925 .......................... $63.75 10-24921 ........................ $250.75
Oil Pressure - gives readout in PSI and features resolution of 1 PSI and an under pressure alarm. P/N 10-24930 ........................ $250.75 Turbine Inlet Temperature (T.I.T) - Features resolution of 1 or 10 and a Hi-temperature alarm at 1650 F. P/N 10-24950 ........................ $250.75 Fuel Pressure - Features Resolution of 1 PSI and under pressure alarm. Slimline Injected 10-32 PSI ......... P/N 10-24970-30A .............. $250.75 Slimline Carb 1-8 PSI .................. P/N 10-24970-30B .............. $335.75
PS BV
4 or 6 Cylinder. Configured like the EDM-700 or EDM-800, this is STCd as the Primary Replacement for certified aircraft. Includes one primary function; CHT, Oil Temp, or T.I.T. To add a function, select P/N 10-00647, 10-00648, or 10-00649. Fuel Flow may also be added (P/N 10-00650), but the Transducer is sold separately.
503
A precision magnetic gauge for narrow vertical tanks. Rubber float travels on spiral rod to record 05-16900 fuel level on hermetically sealed side-reading dial marked E, 1/4, 1/2, 3/4, F. All aluminum construction. Housing has 1-1/2 NPT male threads for connection to threaded bushing (see below). Available in two lengths: Length L 15, Float Travel 12-3/4 ............. P/N 05-16900.......... $69.85 Length L 19, Float Travel 16-3/4............. P/N 05-17000 $78.50 Welding Bushings - 6061 aluminum, 2-1/4 O.D., 1/4 wall. Available in 1 & 2 length. Use with welding ring to provide base for attaching to fuel tank with bolts or rivets. Ring may be welded at any point along bushing to permit depth adjustment. Specify bushing length. For use with Spiral Action Gauge. 1Bushing .......................P/N 10362-1 ........... $14.25 2Bushing .......................P/N 10362-2 ........... $15.75 Welding Ring - 6061 aluminum, 4-3/8 O.D., 2-1/4 I.D. to fit above welding bushings. For use with Spiral Action Gauge...................................... P/N 10363 ................ $4.40 These fuel senders are designed for top mounting in unpressurized aluminum, stainless steel, or plastic fuel tanks in all types of marine vessels. They include special features and protection from corrosion problems (internal and external to the fuel tanks) which make them the quality standard for the industry. Standard configuration, with the lead hole at 12:00, has the float arm swinging at 3:00. The float arm on this sender is 24" [609mm] long measured from the pivot point allowing it to be cut to an appropriate length to gauge any tank depth from 6" [152mm] to 25" [635mm]. The float and the washers are furnished unassembled to the float arm. The cutting and crimping process is to be done prior to the float assembly. The fuel sender is equipped with a thick film resistance card with a range of 0 to 90. The recommended gasket for use under the head is made of nitrile rubber and must be ordered separately. P/N 10-02045 ...................$21.65 Lever-action gauge measures fuel level from full to empty on fractional dial. Matte-white markings on 2 black dial with red No Take-off sector below the 1/4 full mark. Cork float has 4 travel. Wire arm 12 long may be cut off to required length, wire bent to 90 angle to secure cork float. 1-13/16 between mounting hole centers. Hermetically sealed dial assembly has magnetically driven, silicone-damped or position pointer to prevent flutter. ............................ P/N 05-16700 ...... $77.85 Accessories Replacement Fuel Float .................................. P/N 05-03395 ........ $2.20 Weld Adapt FLANGE 10361 ........................... P/N 10361 ........... $10.45 Gasket for 05-16700........................................ P/N 15-4 ................ $3.25
The affordable Shadin F/ADC-200 Fuel/Air data computer maximizes aircraft range and fuel economy by providing automatic updating to your GPS for true air speed, winds aloft, wind components, density altitude, OAT, pressure altitude, fuel flow rate, fuel used, fuel required to destination, fuel endurance, and more. Interfaces with most popular GPS units including Bendix King KLN series, Garmin 150, 155, 165, Trimble 2000/3000 series, and Arnav. Please specify aircraft make/ model, engine make/model, serial number of aircraft, and GPS make/ model at time of order. P/N 10-24768 ........Please Call
IMPORTANT: For all Shadin orders, please specify engine make and model number; aircraft make and model number; specify gallons, pounds or liters on readout and if Loran or GPS will interface. Specify make and model. SHADIN SYSTEMS PRICING
Prices for Shadin Microflo, Digiflo, & Miniflo systems vary according to aircraft/engine models. Call Aircraft Spruce for your best pricing on any Shadin system. Aircraft Spruce guarantees to meet or beat any competitors current advertised prices. This Datcon fuel gauge and senders are designed for use with 12 volt electrical systems in automotive, marine and homebuilt aircraft applications. The gauges have a round 2 diameter case with chrome bezel. Mounting brackets and instructions are furnished. 24033 Ohms. Gauge No. 100177 with steel case P/N 100177 $34.85 Lighting Kit (12V) ....................................P/N 06215-00 ............ $4.65
This direct reading fuel quantity gauge is usable in tank depths up to 9 such as Luscombe & Aeronca. Not FAA approved. Excellent for homebuilt aircraft. Displays fuel level from full to empty. Size: 1-1/2 diameter face. Fuel Gauge ............................. P/N 05-00029 ..................... $43.00 Rebuild kit for Fuel Gauge ...... P/N 05-00031 ....................... $9.25
This Fuel Level Sender has removable mounting plate which can rotate 180 to mount on either right hand or left hand position. For tanks 6-15 deep. P/N 05-16710 ....................$31.50
Use the Gas Gauge Tool Set to remove or install gauges. It helps prevent damage to chrome inner & outer nuts. Available in standard (economical version) and deluxe (heavyduty version). The tool used on the standard (outer nut) has been specifically designed to work on the original or new style nut. The tool used on the deluxe (inner nut) has a tight fitting handle, which you will need to hammer in. This offers you better leverage & sure grip. Heavy-duty version. Standard.................................P/N 05-06813 .......$9.85 Deluxe ....................................P/N 05-06814 .....$21.75 Gas Gauge Float comes in two versions (Epoxy-Coated Cork and Modern Neoprene Cork). Epoxy-Coated Cork Float: When replacing the float on the wire, follow it with a washer and a drop of solder to secure the float in place. Modern Neoprene Float: - This float is alcohol and gas resistent, and will not sink. It is not affected by modern ethanol based fuels. Highly recommended. USA made. Epoxy-Coated Cork Float: ......P/N 05-06818 .......$1.75 Modern Neoprene Float: .......P/N 05-06815 .......$6.95 Gas Gauge Nut available in two versions: Inner - Chrome Plated - Small .........P/N 05-06816 .......$7.85 Inner - Chrome Plated - Large .........P/N 05-06817 .......$8.35
Float type fuel sight gauge used in Stearman dusters. Plastic tube with fuel level marking and 3/4 male pipe thread fitting. 16 long overall, 8 tank depth. 5-1/2 travel. Use AN867-6 Aluminum Welding Flange to mate with above gauge. P/N 10435....... $69.25 Aluminum Welding Flange to mate with above gauge. P/N AN867-6 ...................... $11.50
504
INSTRUMENT HOOK-UPS
1. Make sketch of instrument layout. 2. Draw lines showing routing of tubing from instruments to the fire wall or other locations. 3. Determine diameters of instrument lines. 1/4 diameter tubing is used for most instruments. The artificial horizon and directional gyro should have at least 3/8 diameter lines. 4. Select the required AN or Nylo-Seal fittings.
CM
It is good practice to put some form of water trap in both the pitot and static lines. It should be placed at the lowest practical point in the system between the pressure source and the instrument. The trap can be a simple T-fitting with a cap:
HELPFUL HINTS
WP ME HA AP
The aluminum lines (1/4-in. diameter) will be flared and attached to the fittings with AN818-4D nuts and AN819-4D sleeves.
LG EP CS IN EL AV TO PS BV
*Use AN816 Nipple and Nyloseal 266-N Female Connector to transition from AN-type fittings to Nyloseal fittings.
Each connection between the aluminum lines and the fittings requires either all AN818-4D nut and AN819-4D sleeve (1/4-in. line) or an AN8186D nut and an AN819-6D sleeve for 3/8-in. line. *Turn/Back vacuum set at 2 In. Hg.
These instruments are overhauled and certified at our affiliated instrument repair facility and are available on an outright purchase basis (stock permitting). For outright purchase, you will be billed the purchase price plus core charge. Core charge is credited upon return of acceptable core. We can also overhaul your instrument at the price shown, and no core charge will be billed. Allow 2-3 weeks for overhaul of your instrument. If in stock, outright purchases can ship within 2 days. Warranty details are included with the instrument. To send in your instrument for overhaul or to return a core, please contact Aircraft Spruce Customer Service in advance for an RMA number and then ship instrument to Aircraft Spruce East in Georgia. Model Overhauled 5000 Series Standard Overhauled 4000 Series Standard Overhauled 1U367-002-2 Overhauled 5934 Series Overhauled 5950 Series Overhauled 371 Series Overhauled 671 Series Overhauled 7000 Series Overhauled 8000 Series Overhauled 8025 Series Overhauled 8030 Series Overhauled 8040 Series Overhauled 8100 Series Overhauled 8125 Series Overhauled 8130 Series Overhauled 8140 Series Description Attitude Gyro Directional Gyro Attitude Gyro Altimeter Altimeter Altimeter Altimeter VSI (Vertical Speed Indicator) Airspeed Indicator Airspeed Indicator Airspeed Indicator Airspeed Indicator Airspeed Indicator Airspeed Indicator Airspeed Indicator Airspeed Indicator Core Charge $125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $0.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 $100.00 PN 10-03111 10-03114 10-03117 10-03119 10-03120 10-03121 10-03122 10-03123 10-03125 10-03126 10-03127 10-03128 10-03129 10-03130 10-03131 10-03132 Price $645.00 $645.00 $398.00 $0.00 $197.00 $197.00 $197.00 $0.00 $224.95 $197.00 $197.00 $197.00 $197.00 $197.00 $197.00 $197.00
OVERHAULED INSTRUMENTS
505
GILL BATTERIES
CM WP ME HA AP LG EP CS IN EL
G-25S 18 30
G-242 G-35
Founded in 1920 in Redlands, CA, Gill has become the OEM original equipment battery for Raytheon, Cessna, Learjet, Mooney, Piper, Ayres, Airtractor, Maule, and many other manufacturers. Gills 600 series batteries have proven to be the high performance, high discharge lead-acid batteries need by jet and turbo-prop aircraft. Gills line of sealed recombinant batteries are now available in most popular sizes and are FAA approved. Gill also provides batteries for battery powered carts which are available by special order. NOTE: Part Numbers with an asterisk (*) ship with acid.
12 VOLT DRY CHARGED BATTERIES FOR GENERAL AVIATION SINGLE & TWIN ENGINE AIRCRAFT
AH @ 30 Min. Wt. Electrolyte Emer. Model 1 hr. (filled) (qts.) rate Cap.(amps) Application (Aircraft) Part No. Price
Aerostar: 600, 601, 601P Beech: 19, 23, 24, 55, 58, 77 Cessna: 11-01833* $151.95 120, 140, 150, 170, 172, 175, 177, 310, 320, 340 Piper: PA-11, 11-01673 $147.95 PA-36, PA-38, Beech: 17, 18, 19, 23, 24, 33, 35, 36, 50, 76 Bell: 47G-5 Cessna: 180, 182, 185, 188, 195, 206, 207, 210 Mooney: 11-01832* $186.95 M20, M20B, M20D, M20G, M20J, M20K Piper: PA-11, PA-12, PA-14, PA-16, PA-18, PA-22-25, PA-28, PA-30, PA-32, PA-34, 11-01672 $179.95 PA-39, PA-44 Maule: M-4-210, -4-210C, -4-230C, -4-180C, -5-210C, -5-220C, -5-200, 11-03791* $224.95 -5-235C, -5-180C, -6-235, -6-180, M-7-235, MX-7-180, MX-7-235 11-03624 $214.95 11-04011* $900.00 Ayres Corp. S-2R 11-01685 $874.00
24 VOLT DRY CHARGED BATTERIES FOR GENERAL AVIATION SINGLE & TWIN ENGINE AIRCRAFT
Electrolyte AH @ 30 Min. Wt. Emer. Model 1 hr. (filled) (quarts) rate Cap.(amps) Application (Aircraft) Part No.
Price
G-240 G-241
8 8
13 13 17 17 30 30 32 32
3 -3 -3 -3 --
4 -4 -4 -4 --
11-01655* $322.95 11-01683 $313.95 11-01656* $308.95 Cessna 152, 172, 182, 172R, 172S 11-01681 $299.95 Cessna: 152, 172, 177, 182, 207, 210, 336, 337 Piper: PA-23, 11-01657* $327.95 PA-31, PA-36 11-01675 $327.95 Cessna: 152, 182, A152, 172, 172R, 172RG, 172S, T182, R182, 11-01658* $354.95 TR182, T303, 210 (S/N 21059503 & ON), T210M, T210N, T210R, 188, 188A, 188B, A188, A188A, A188B AND T188C Cirrus: 11-01678 $345.95 SR20, SR22 Slingsby Aviation, Ltd.: T67M260, T67M260-T3A Beech: A60 Cessna: 310, 335, 340, 402, 404, 414, 421 Piper: 11-01555* $349.95 PA-31 11-01543 $336.95 11-01660* $367.00 11-01670 $354.00 11-01661* $364.95 Airtractor: AT-300, AT-400 Piper: PA-23, PA-31 11-01680 $351.95 11-01772* $409.95 Piper PA-31P-350 11-01662 $385.95 Cessna 152, 172, 182
12 VOLT VRLA BATTERIES FOR GENERAL AVIATION SINGLE & TWIN ENGINE AIRCRAFT (SEALED)
AH @ 30 Min. Wt. Model 1 hr. Cap.(amps) (filled) rate Application (Aircraft) Part No. Price
AV TO PS BV
G-25
G-35S 23
40
Cessna: 120, 140, 150, 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, 150L, 150M, 170, 170A, 170B, 172, 172A, 172B, 172C, 172D, 172E, 172G, 172F (USAF T-41A), 172H (USAF T-41A), 172I, 172K, 172L, 172M, 172N, 172P, 172Q, 172R, 172S, 175, 175A, 175B, 175C, 177, 177A, 177B, 310, 310A (USAF 25.0 U-3A), 310B, 310C, 310D, 310E (USAF-U-3B), 320, 320-1, 320A, 320B, 320C, 11-01316 $149.95 320D, 320E, 320F, 340 Piper: PA-11, PA-36-285, PA-36-300, PA-36-375, PA-38-112 Aerostar: PA-60-600 (Aerostar 600), PA-60-601(Aerostar 601), PA-60-601P (Aerostar 601P), PA-60-602P (Aerostar 602P) Raytheon: 19A, 23, A24, D55, E55, E55A, 58, 58A, 77 Sky International: A-1, S-1S, S-1T, S-2, S-2A, S-2S, S-2B Beechcraft: 23, 35, 36, 50, 76 G-35S Bell: 47G-5 Cessna: 180, 182, 185, 188, 195, 206, 207, 210 Maule: M-4-210, -220, -180, M-5-180, -210, -220, -235, -200, -210TC, M-6-180, -235, M-7-235, MX-7-180, MX-7-235, MXT-7-180, MT-7-235, 29.0 11-01679 $187.95 MX-7-160, MXT-7-160, MX-7-180A, MXT-7-180A, MX-7-180B, M-8-235 Mooney: M20, M20B, M20D, M20G, M20J, M20K Piper: PA-12, PA-14, PA-16, PA-18, PA-22, PA-23, PA-24, PA-25, PA-28, PA-30, PA-32, PA-34, PA-39, PA-44
G242S G-243S
G-246
10 13
17 20
11-01665 $366.95
28.8 A188A, A188B AND T188C Cirrus: SR20, SR22 Mooney: M20M, M20R Slingsby 11-01666 $354.95
Free UPS Ground* Shipping in 48 States No UPS Hazardous Charge ~ Pay Price of Battery - Thats It! FULL MFG. WARRANTY SHIPPED SAME DAY ORDERED *Batteries up to 50 lbs.
NOTE: The data in the Application section above is intended as a reference guide only. Some installations may vary and require airframe or battery box modification. Some applications may require field approval and some listings are pending FAA approval. Verify correct battery model for your aircraft before ordering. Dry charged Gill Batteries are furnished with electrolyte (except overseas) unless requested otherwise.
506
GILL BATTERIES
NOTE: Part Numbers with an asterisk (*) ship with acid.
24 VOLT DRY CHARGED BATTERIES FOR TURBO PROP AND JET APPLICATION
Model ElectAH 30min Wt.lbs rolyte 1hr. E.C. (filled) (quarts) rate (amps) Application (Aircraft) Dassault: Fan Jet Falcon Series C-F Raytheon Beech: 65-90, 65-A90, 65-A90-1(JU-21A, U-21A, RU-21A, RU-21D, U-21G, RU-21H), 65-A90-4(RU-21E, RU-21H), B90, C90, E90, F90, 99, 99A, 100, A99, A99A, A100, A100A, B100, 200, A100-1(U-21J), 200C, 200CT, 200T, A200(C-12A) OR (C-12C), A200CT(C-12D), OR (FWC-12D) OR (RC-12D), OR (C-12F) OR (RC-12G) OR (RG-12H) OR (RC-12K) OR (RC-12P), B200, B200C, (C-12F) OR (UC-12F) OR (UC-12M) OR (C-12R), B200CT, B200T, 300, B300, 300LW, B300C, MU-300-10, 400, 400T, Hawker 1000 Bell: 204B, 205A, 205B, 205A-1, 212, 222U, 412 Cessna: 208, 208B, 425, 441, 500, 501, 550, 551, S550, 560, 560XL Embraer: EMB-110P1, EMB-110P2 Learjet: 23, 24 series, 25 series, 28 series, 29 series, 35 series, 36 series, 31, 31A, 55, 55B, 55C series Gulfstream: G-159 Israel Aircraft Industries: 1121, 1121A, 1121B, 1123, 1124 Lockheed-GA: 1329-23 series Mitsubishi: MU-2B, MU-2B-10, -15, -20, -25, -26, 26A, -30, -35, -36, -36A, -40, -60 Pilatus: Pilatus-PC-12 Piper: PA-31T, -31T1, -31T2, PA-42 and PA-42-720 Rockwell: NA-265 series; Aero Commander: 680T, 680V, 680W, 690, 690A Sikorsky: S-76A, S-76B, S-76C Socata Group Aerospatiale: TBM-700 Dassault: Fan Jet Falcon Series C-F Beech: 65-90, 65-A90, B90, B100, C90, E90, 99, 99A, 100, A99, A99A, A100, A100A, F90 Embraer: EMB-110P1, EMB-110P2 Learjet: 23, 24 series, 25 series, 28 series, 29 series, 31, 31A, 35 series, 36 series, 55, 55C Gulfstream: G-159 Israel Aircraft Ind.: 1121, 1121A, 1121B, 1123, 1124 Lockheed-GA: 1329-23 series, 23A, 23D, 23E Mitsubishi: MU-2B, MU-2B-10, -15, -20, -25, -26, -26A, -30, -35, -36, -36A, -40, -60 Rockwell: NA-265 series; Aero Commander: 680T, 680V, 680W British Aerospace: DH.125-400A, HS.125-600A, HS.125-700A, BH.125-600A, BAE.125-800A, Jetstream series 3101 Hawker Siddeley, Beechcraft Hawker: DH.125, HS.125, BH.125 MesserschmittBolkow-Blohm GMBH: BO-105S Part No. Price
CM WP ME
G-641
G-6381E 43 70 80
11-01557* $1,234.00
---
11-01545
$1,228.00
9 G-638E 37 60 73 ---
G-6381C
24 14 18
40 25 30
55 40 54
11-04158* $1,083.00
HA AP LG EP CS IN EL AV TO PS
G-6381C
43
70
80 ---
GE-51E
G-638C
37
60
95 ---
24 31 22 10 31 22 10
40 55 35 16 55 35 16
55 80 56 32 80 56 34
GE-54C
GE-50C GE-51C GE-54C
11-01607 $1,065.00 11-04160* $646.00 Beech: 65, A65, 65-80, 65-A80, 65-B80, 65-88, 70 11-01608 $618.00 Bell: 206, 206A, 206B, 206B-1, 206L, 206L-1, 206L-3 McDonnell Douglas (Hughes) : 369, 369A, 369H, 11-02448* $1,032.00 369HM, 369HS, 369HE, 369D, 369E, 369F, 369FF, 500N, 600N with STC kit SR01427LA installed Schweizer 11-01684 $998.00 Aircraft Corporation: 269D (333) Dassault: Fan Jet Falcon Series C-F Beech: 65-90, 65-A90, B90, C90, E90, 99, 99A, 100, A99, A99A, A100, A100A Embraer: EMB-110P1, EMB-110P2 Learjet: 23, 24 series, 25 series, 28 series, 29 series, 35 series, 36 11-04155* $1,246.00 series Gulfstream: G-159 Israel Aircraft Ind.: 1121, 1121A, 1121B, 1123, 1124 Lockheed-GA: 1329-23 series Mitsubishi: MU-2B, MU-2B-10, -15, -20, -25, -26, 26A, -30, -35, -36, -36A, -40, -60 Rockwell: NA-265 series; Aero 11-01609 $1,218.00 Commander: 680T, 680V, 680W Dassault: Fan Jet Falcon Series C-F Beech: 65-90, 65-A90, 65-A90-1(JU-21A, U-21A, RU-21A, RU-21D, U-21G, RU-21H), 65-A90-4(RU-21E, RU-21H), B90, C90, E90, F90, 99, 99A, 100, A99, A99A, A100, A100A, B100, 200, A100-1(U-21J), 200C, 200CT, 200T, A200(C-12A) OR (C-12C), A200CT(C-12D), OR 11-01557* $1,234.00 (FWC-12D) OR (RC-12D), OR (C-12F) OR (RC-12G) OR (RG-12H) OR (RC-12K) OR (RC-12P), B200, B200C, (C-12F) OR (UC-12F) OR (UC-12M) OR (C-12R), B200CT, B200T, 300, B300, 300LW, B300C, MU-300-10, 400, 400T, Hawker 1000 Bell: 204B, 205A, 205B, 205A-1, 212, 222U, 412 Cessna: 208, 208B, 425, 441, 500, 501, 550, 551, S550, 560, 560XL Embraer: EMB-110P1, EMB-110P2 Learjet: 23, 24 series, 25 series, 28 series, 29 series, 35 series, 36 series, 31, 31A, 55, 55B, 55C series Gulfstream: G-159 Israel Aircraft Ind.: 1121, 1121A, 1121B, 1123, 1124 Lockheed-GA: 1329-23 series Mitsubishi: MU-2B, MU-2B11-01545 $1,228.00 10, -15, -20, -25, -26, 26A, -30, -35, -36, -36A, -40, -60 Pilatus: Pilatus-PC-12 Piper: PA-31T, -31T1, -31T2, PA-42 and PA-42-720 Rockwell International: NA-265 series; Aero Commander: 680T, 680V, 680W, 690, 690A Sikorsky: S-76A, S-76B, S-76C Socata Group Aerospatiale: TBM-700 Hawker Siddeley Beechcraft Hawker: DH-125, HS-125, BH-125 Messerschmitt-Bolkow-Blohm 11-04157* $1,101.00 GMBH: BO-105S 11-01610 $1,089.00 11-03809* $742.00 11-01686 $688.00 11-04192* $633.00 11-01612 $633.00 11-09842* $667.00 11-01547 $592.00 Gulfstream Commander: 500, 520, 560, 560A, 560E, 680, 680E, 720 North American: AT6-C, 11-03808* $698.00 AT6-D, AT6-F, T-6G, SNJ-5, SNJ-6, SNJ-7 or any BC-1A, AT6, AT6-A, AT6-B, SNJ-2, SNJ-3, SNJ-4 11-01682 $682.00 converted to 24 volts per North American Drg 121-954004, P51 11-03810* $584.00 Airtractor: AT-301, AT-301A 11-03623 $569.00 11-01558* $639.00 11-01546 $607.00
Application (Aircraft) Bell: 206A, 206B, 206L, 206L-1, 206L-3 with STC SR01406LA McDonnell Douglas(Hughes):
Part No.
Price
35 70 42
44 369, 369A, 369H, 369HM, 369HS, 369HE, 369D, 369E, 369F, 369FF, 500N, 600N with STC Kit 11-06245 $1,677.00 85 60
SRO 1427LA installed. Schweizer Aircraft Corporation: 269D (333) Same applications as the G-6381E above 11-05171 $2,063.00 British Aerospace: DH.125-400A, HS.125-600A, HS.125-700A, BH.125-600A, BAE.125-800A, Jetstream series 3101 Hawker Siddeley, Beechcraft Hawker: DH.125, HS.125, BH.125 11-07462 $1,783.00 Messerschmitt-Bolkow-Blohm GMBH: BO-105S
Free UPS Ground* Shipping in 48 States No UPS Hazardous Charge ~ Pay Price of Battery - Thats It! FULL MFG. WARRANTY SHIPPED SAME DAY ORDERED *Batteries up to 50 lbs. NOTE: The data in the Application section above is intended as a reference guide only. Some installations may vary and require airframe or battery box modification. Some applications may require field approval and some listings are pending FAA approval. Verify correct battery model for your aircraft before ordering. Dry charged Gill Batteries are furnished with electrolyte (except overseas) unless requested otherwise.
Battery electrolyte (battery grade sulfuric acid) in sealed polyethylene pouch with self-contained dispenser tube, packaged in sturdy cardboard container. Specific gravity 1.285. Detailed filling & disposal instructions on container. 2 Qts.................P/N 11-00300 .............$6.95 3 Qts.................P/N 11-00305 .............$9.85
11-01316
11-01679
11-01666
BV
Price
Weight 25 Lbs. (full) Electrolyte: Not Needed 28.8 Lbs. (full) Electrolyte: Not Needed
Part No.
11-01316 $149.95
507
CONCORDE BATTERIES
CM WP ME
RG-25 RG-25XC RG-35A RG-35AXC RG-24-11 RG-24-11M RG380E/44
Since their introduction in 1986, several styles of RG Batteries, likewise known as VRSLAB, SLAB, or AGM batteries, have been developed by Concorde Battery Corporation. Concorde Battery has a dedicated Research and Development Department that is continuously improving and refining its recombinant gas product line. Formed in 1977 Concordes factory was dedicated to manufacturing dry charged (vented or flooded electrolyte) aircraft batteries. In 1985 Concorde developed its first recombinant gas battery with absorbed glass mat separators. Now, with the proven reliability of Concordes recombinant gas (RG) aircraft batteries and great acceptance in both military and commercial appllications, over 90% of its manufacturing has been changed over from dry charged to RG production. *NOTE* - The STC for some aircraft is available at an additional cost please call 877-4-SPRUCE (777823) if applicable to your aircraft.
HA AP LG EP CS IN EL AV TO PS BV
Concordes line of sealed lead acid batteries is designed with larger positive and negative plates for more capacity and greater starting power even at sub-zero temperatures. They feature real aircraft quality terminals, patented copper alloy internally threaded terminals brass terminal bolts with conical silicon bronze lock washers, recommended 70 pound terminal torque, more than 20% higher capacity than earlier models, and a molded carrying or lifting handle. These valve regulated sealed lead acid batteries feature fully aerobatic sealed construction; no spillable electrolyte or flammable gas emissions. XC or AXC in the model number indicates extra cranking power, and M in the model number indicates manifold venting. Battery Connect Amp Our Our Amp Part No. Part No. Battery Type Connect Hour Volt Part No. Price Type Type Hour Volt Part No. Price Type RG-25 Sealed Lead Acid A 22 12 11-03879 $188.95 RG-12LSA Sealed Lead Acid A 11.00 12 11-09455 $218.95 RG-25XC Sealed Extra Crank A 24 12 11-03880 $216.95 RG24-15 Sealed Lead Acid A 13.60 24 11-03878 $479.00 RG-35A Sealed Lead Acid A 29 12 11-03881 $238.95 RG24-15M Sealed Lead Acid A 13.60 24 11-04951 $479.00 RG-35AXC Sealed Extra Crank A 33 12 11-03882 $254.00 RG24-16 Sealed Lead Acid A 13 24 11-05112 $469.95 RG-24-11 Sealed Lead Acid A 11 24 11-03876 $429.95 RG24-20 A 19 24 11-00174 $595.00 RG-24-11 M Sealed Lead Acid A 11 24 11-03877 $449.00 RG380E/44* Sealed Lead Acid E 42 24 11-03883 $2,457.00
CB25
CB25XC
CB35AXC
CB35A
CB24-11
CB24-11MXC
The Platinum Series battery line from Concorde features more cold cranking amperes for one minute at 0F, and more 30 minute emergency capacity than any other brand. Platinum Series batteries provide more one hour capacity than any other brand as well as more high rate performance. These batteries utilize real aircraft quality copper alloy terminals with silicone bronze bolts and conical washers. The batteries listed in the chart below which are not described as Platinum are the original series of Concorde lead acid batteries.
BATTERY WARRANTY
(Applicable to Gill and Concorde) The manufacturer will replace with a new battery without charge (except for transportation) any battery which fails in service within 90 days. Addition of any chemical other than water or battery grade sulfuric acid voids this warranty. After expiration of Service Guarantee, adjustment will be made on pro-rata basis based on unused months of service. Batteries that are broken, discharged or fail due to freezing or abuse are not covered.
Part No. 11-06405 11-05837 11-01571 11-01572 11-06244 11-03776 11-03769 11-03771 11-03772 11-03773
Battery Type CB25 with acid CB25 without acid CB25XC with acid CB35AXC with acid CB35AXC without acid CB-35A with acid CB-35A without acid CB24-11 with acid CB24-11 without acid CB24-11M without acid
Ampere Hour Weight (lbs.) 20 Ah 20 Ah 25 Ah 34 Ah 34 Ah 29 Ah 29 Ah 10 Ah 10 Ah 10 Ah -22.0 28.5 -32.5 -28.5 -27.0 28.0
Volts 12 12 12 12 12 12 12 24 24 24
Price $198.95 $189.95 $224.95 $269.00 $262.95 $245.95 $229.95 $433.95 $417.95 $448.95
NOTE: Some installations may vary and require airframe or battery box modification. Some applications may require field approval. Verify correct battery model for your aircraft before ordering. There may be a charge for STC paperwork on certain batteries.
Free UPS Ground* Shipping in 48 States No UPS Hazardous Charge ~ Pay Price of Battery - Thats It! FULL MFG. WARRANTY SHIPPED SAME DAY ORDERED *Batteries up to 50 lbs.
RG-443 BATTERY
RG-380E/40L BATTERY
RG-500 BATTERY
RG Valve regulated sealed lead acid battery. Lear-jet models 40 & 45. STC #ST01173WI FAA-PMA supplement #59. Emergency Battery ICA calls out the first Cap Check at 12 months or 2000 hrs; subsequent checks at 12 months or 1000 hrs. 24V, Wt: 27 lbs P/N 11-02948 .................$2,364.00
RG-380E/40L and temperature sensor TSC6A Concorde #5-0242. RG valve regulated sealed lead acid battery. PIAGGIO P-180. Replacement for Ni-Cad battery. STC #SA01653LA. FAAPMA Supplement #74 Engine starting, reliable power in the event of a generator failure. 24V, Wt: 86 lbs. P/N 11-02949 ................ $3,023.00
Primary Aircraft Purpose: Helicopter Series Voltage: 24V Rated Capacity C1 = 1 hour Rate in ampere hours:17 Max Weight: 42 lbs. / 19.1 kg P/N 11-04738 ................ $2,519.00
508
A portable, light weight unit designed to provide the operator with an economical, easy, and accurate means for capacity testing aircraft batteries. Fully automatic testing for 12 Volt AND 24 Volt Lead Acid or Nickel Cadmium Aircraft Batteries. Powered by the battery being tested - No AC power required. Constant current load adjustable in one ampere increments from 10 to 50 ADC. 50 mv resolution. 10 LBS / 4.5 KG Kg. Length 12 (30 cm). Width 9 (23 cm). Height 10 (25 cm). LCD display. Over temperature protection. Audio alert when capacity test is complete P/N 11-07388 ...... $1,372.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Light weight / High strength aluminum case, Fully automatic: 3 stage charger can be left on the battery for long periods, Charge Status LEDs: Power on, charging and full charging. Features: Light weight / High strength aluminum case. Fully automatic: 3 stage charger can be left on the battery for long periods. Charge Status LEDs: Power on, charging and full charging. Circuit protection: reverse polarity and short circuit protected (fused). UL and CE approved. Power cord length 6 feet and 4 foot Charger cord with ring terminals included Charge control: Modified constant current charge to a constant finishing voltage, then to a float standby. Supported with a 2 year warranty Specifications: Input: 100-240VAC 50/60Hz 3 Amps. Output: 12 VDC 5A. Dimensions: 6.5W x 3.5H x 1.8D. Weight: 1.8 pounds. P/N 11-09985 ........... $99.95
The BC-6000 Battery Capacity Tester from Concorde. The BC-6000 is designed to accurately test and report on batteries ranging in capacity from 10AH - 50AH. Plugged into a a USB port, the BC-6000 will create test reports directly from your computer. Tests both 12V and 24V lead acid batteries with capacity ratings from 10 AH to 50 AH. Constant current load in 1 Amp steps. Battery powered operation. No AC power required. LCD display. 50 MV voltage resolution. Overtemperature protection. Automatic audio warning upon completion of capacity test. P/N 11-10482 ...... $1,475.00
Small, lightweight. Smart state-of-theart software. Charger starts when battery requires charge Adjusts to all Gill 24V batteries. LED progress indicators: indicates battery charge level. Smart Circuit will not overcharge battery. Circuit Protection - reverse & short protection Sleep mode when battery is charged. Specifications: Input: 110120VAC @ 60 HZ 3.4 amps, Output: 27 VDC Nominal 7.7 Amps, Oper. Temp.: 23-104F, Wt: 3.3 lbs......................................P/N 11-01541 .........$319.95 Gill 24 60187 - 220V international...............P/N 11-07862 .........$319.95
The BC-7000 Battery Capacity Tester from Concorde. Create accurate reports straight from the computer. USB Port access required. Fully automatic testing for 12 Volt AND 24 Volt Lead Acid or Nickel Cadmium Aircraft Batteries. Tests both 12V and 24V lead acid batteries with capacity ratings from 0.5 AH to 50 AH. Adjustable End Point Voltage (EPV). Battery discharge mode to 1V EPV. Adjustable Constant Current loads in 0.1 Ampere increments from 0.5 Ampere to 15 Ampere plus or minus 1.5%. Adjustable Constant Current loads in 1.0 Ampere increments from 15 Ampere to 50 Ampere plus or minus 1.0%. Universal AC power input 85~264vac (47 to 63Hz). 10mv voltage resolution. Overtemperature protection. Audio warnings for completion of capacity test or a malfunction of the process. P/N 11-10483 ...... $2,164.00
This Parasitic Load Tester Adaptor (PLTA) measures the parasitic load / drain on aircraft batteries when the master switch is off and the aircraft is inactive. The adaptor is designed to mate with a MS3509 style quick disconnect receptacle. Measuring parasitic load is easy to do by connecting the PLTA between the battery receptacle and the aircraft mating plug. The PLTA is a molded polypropylene body equipped with separate test leads for connection to a digital multimeter (DMM). It is rated for loads up to 10 amperes and is equipped with a 10 amp fuse. P/N 11-09841 ..................... $59.75
The BC-8000 has been designed to provide the operator with a cost effective battery charger and capacity tester in one unit. The step by step digital display is easy to program in order to set it and forget it. For use on Nickel Cadmium or Lead Acid Batteries. Capacity Tester Features: Adjustable constant current load in 0.1 Ampere increments from 0.5 Ampere to 15 Ampere (+/- 1.5%) Adjustable constant current load in 1.0 Ampere increments from 15 Ampere to 55 Ampere (+/- 1.0%) USB 2.0 port for PC connection BC Report Utility software for hard copy printout of test results Charger Features: Adjustable output from 3.0 to 36.0 Vdc Adjustable output amperes from 0.05 to 25 Adc Constant voltage (CV) or constant current (CC) charge Adjustable charge time from 1-999 min Single or two step charge routine Common Features: Universal AC power input 90~264vac (47 to 64Hz) 10mv voltage resolution 4 line LCD display Over temperature protection Audio warning when capacity test is complete or if the unit malfunctions Real time internal clock with battery backup P/N 11-10484 ...... $4,182.00
509
BATTERIES - CHARGERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Power Sonic sealed maintenance-free batteries allow safe, trouble-free operation in any position. You never need to add electrolyte; gases generated during over charge are recombined in a unique oxygen cycle. Under normal operating conditions, 4 or 5 years of dependable service can be P/N 11-03153 expected in standby applications, or between 200 and 1000 charge/discharge cycles, depending on depth of discharge. Temp. range: -76 to +140F. 3-AMP BATTERY - Model: Powersonic PS-1230, PPS SKU: 35L116S1 Shipping Weight: 3 lbs, Dimensions: 5.23L x 2.64W x 2.36H, Voltage: 12 Volts, Capacity: 3 Amp Hour(s), Chemistry: Lead. P/N 11-03153 ............. $24.85 18-AMP BATTERY - Model: Powersonic PS-12180NB, PPS SKU: 35L105S3, Shipping Weight: 14 lbs, Dimensions: 7.13L x 2.99W x 6.57H, Voltage: 12 Volts, Capacity: 18 Amp Hour(s), Chemistry: Lead. P/N 11-03154 ............. $61.50 26-AMP BATTERY - Model: Powersonic PS-12260NB, PPS SKU: 35L107S1, Shipping Weight: 18 lbs, Dimensions: 6.56L x 6.97W x 4.92H, Voltage: 12 Volts, Capacity: 26 Amp Hour(s), Chemistry: Lead P/N 11-03155 ............. $84.50
POWERSONIC BATTERIES
Odyssey batteries, with an eight year design life saves you time and money because you do not have to replace your battery as often. It is also the ONLY battery that is capable of delivering a large number of deep cycles up to 400 when fully discharged or 11-01651 11-02233 up to 500 when discharged to 80%. Plus, the battery is specially designed for high vibration applications. Unlike conventional batteries that need to be recharged every six to twelve weeks, the Odyssey battery will maintain up to 50% state of charge after 2 11-01945 years if stored at room temperature (77F). At temperatures lower than 77F, storage times will be even longer. The cranking power of Odyssey batteries is double to triple that of equally sized conventional batteries, even when the temperature is as low as -40F. Odyssey batteries may be shipped worry free by UPS/ Federal Express or air. 2 Year Warranty. Part No. Dimensions Weight Cranking Amps Price 11-08080 6.7 x, 3.90 x 6.89. 13.2 625 for 5 seconds $106.67 11-08081 7/8 x 3-3/16 x 5 1/8 11.7 545 for 5 seconds $137.31 11-08082 7.0 x 3 3/8 x 5 1/8 12.6 545 for 5 seconds $156.71 11-02233 7-1/5 x 3 x 6-6/5 15 Lbs. 680 for 5 seconds $150.48 11-01651 6-9/16x 6-7/8x 5-11/16 24 Lbs. 925 for 5 seconds $210.06 11-01945 73/16x 31/16x 69/16 15 Lbs. 680 for 5 seconds $190.30
ATPs UltraStart-Red & UltraBat-13 batteries are the ultimate in high power density non-spillable SLA batteries. Ideal for starting light aircraft engines for ultralight and experimental aircraft and other internal combustion engines. Typical applications include all Rotax 2 stroke engines and HKS 4-stroke engines. For engines 100HP and up UltraStart-Red - Voltage: 12.6 VDC, Energy: 5AH cap., Peak current: 250A instantaneous, Weight: 4.4 lbs., Size: 2.7l x 3.5w x 5.0h UltraBat-13 Voltage: 12.6 VDC, Energy: 13AH cap., Peak current: 650A instantaneous, Weight: 10.8 lbs., Size: 3-3/8l x 7w x 5h UltraStart-Red ........................................P/N 11-00375 ........... $89.95 UltraBat-13 .................................................P/N 11-00378 ......... $179.95 Battery box for UltraStart-Red................P/N 11-01997 ........... $32.75
Full Spectrum Power makes no compromise in the design and construction of their lightweight batteries. These batteries deliver the highest current, at consistent voltage, powering the worlds fastest motorcycles. Full Spectrum Power is the only battery company in the powersports market that uses real, certified cells from A123 Systems. These are the finest cells on the planet. Every Full Spectrum Power battery is designed and manufactured in the USA, using engineering and assembly methods derived from years of working with factory race teams in AMA Superbike, Supercross, Motocross, Drag Racing, Land Speed Racing, and Flat Track. Technology which was only available to the factory teams is now available to everyone! Full Spectrum batteries are now available to the Ultralight & LSA market. Not FAA Approved for Aircraft use.
This hold down bracket for the Odyssey PC 680 battery can be easily mounted in any orientation. Color: Black. P/N 11-01853 .......... $38.75 Yumicron CX technology is OEM's choice for longer battery life, lower maintenance and more cranking power. The YuMicron CX was the first small engine starting battery to use "lead calcium" technology. This special technology means the YuMicron CX generates more power, requires less maintenance, and lasts longer than any other conventional battery. Specifications: Battery Family: YuMicron CX, Battery Type: Y50-N18LA-CX, Voltage: 12 Capacity: 20 Dimensions: 8.125" x 3.5625" x 6.4375" Weight: 11.2 lbs. Metric Dimensions: 205mm x 90mm x 162mm Metric Weight: 5.1 kg, Acid Volume: 47.3 oz., Amps: 2 Electrolyte needed: 47.3 oz. P/N 11-09496 ........................$96.50 This unique tool is designed to provide positive tightening of battery terminals on all popular brands of lead/ acid aircraft batteries without over-torquing and without the danger of an electrical short. The tool is made from steel for rugged service and is fully insulated with a rubber hand grip for protection against electrical shorts. P/N 12-16200 .......... $10.85 Battery Corrosion Guard forms a thin protective coating that will neutralize battery acid on all treated areas. It is an excellent way to clean the battery, hold down straps, and all metal parts you want to protect including cables, clamps, box, and posts. Excellent for aluminum battery boxes. Widely used in the aircraft, truck, and boat industries. 3 oz. can ........... P/N 11-00310........... $16.65 8 oz can ............ P/N 11-00320........... $24.75 11 oz. can ......... P/N 11-09615........... $31.50 PowerPulse is not a charger. It's a performance device designed to help batteries charge faster and provide maximum performance and power. This patented unit uses a revolutionary ReNew-IT Pulse Technology to safely prevent the main cause of battery problems and failure. Used extensively by the consumers and the U.S. Military worldwide for almost ten years. PowerPulse can be powered in two different ways. The PowerPulse system can also be used together with an existing charging system. In fact, it will work even faster and stronger. This means batteries can be both charged and desulfated at the same time. 12V ..................P/N 11-07464 ........................$45.75 24V ..................P/N 11-10461 ........................$49.95
PULSE SERIES
PULSETECH POWERPULSE
PULSE P4 BATTERY - Save 10 lbs. over a stock battery with twice the
power 500 cranking amps / 10 amp hour capacity Integrated Protection Circuit (IPC) Heat, impact, and water resistant case 100% Made in the USA Dimensions: 4.5 in (L) x 3.5 in (W) x 3.75 in (H) Weight: 3.3 lbs. Common Applications include: 1300cc inline 4-cylinder sportbikes; 1200cc twins; Drag racers using total-loss ignition systems. P/N 11-10705 ......$329.00
510
Available as standard fiberglass battery box or as gel coated version. Gel coated battery box is same dimensions but with white gel coating and with the mount integrated into the box. Fiberglass Battery Box ....................................P/N 11-11007 .....$107.30 Met-Co-Aire Battery Box White .......................P/N 11-05614 .....$128.75 Maintenance-free operation Excellent shelf life Long cycle life Can be mounted on its side Delivered fully charged and ready for use No corrosive gas generation 300 Starting AMPS Warranty 1 year or 100 hours. Quality construction provides superior resistance to shock and vibration DOT AND IATA approved for shipment by air as dry cells Note: FOR EXPERIMENTAL AIRCRAFT ONLY. P/N 11-03156 ........$143.95 These manifold vented batteries work well in home builts with low amperage requirements, putting out a lot of power for their size and weight. Made by Yuasa General in Reading, Pa. 27.1oz. electrolyte required to fill (not furnished). YB14LA2 , 12V, 14AH - This model being used in the VariEze & Long-EZ. Easily handles the load of starting a Lyc. 0-235 engine. Size: 5-9/32l x 3-1/2w x 6-11/16h. Wt. 10 lbs. P/N 11-01847 ..........$52.75 YB16-B, 12V, 18AH - Used in the Solitaire sailplane, VariEze, Long-EZ & other homebuilts without starter. Size: 7lx4wx6.25h. Wt: 12.7 lbs P/N 11-01848 ..........$50.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Battery Racks Model Dims. 8H x 5-3/16W HR-25 7-7/8L 8H x 5-3/16W VR-25 7 7/8L 8H x 5-3/16W HR-35 9-7/8L 8H x 5-3/16W VR-35 9-7/8L
YUMICROM BATTERIES
Firewall battery box for Cessna Models 170, 170A, 170B, 180 thru 180K, 185 thru 185E, A185E, A185F STC Approved: SA02333AK-D. Note: Does not include battery. ...... P/N 05-04766 ................$378.00
Replace Piper Battery Boxes * Metal & Plastic replacement approved. * Stainless Steel Construction * Brass screw-in vent-tubes. * Better than original drain tube * Battery Box Modification included.
BOX 06-Bba 06-Bba 06-Bba 06-Bba 06-BBc 06-BBc 06-BBc 06-BBc 06-BBc 06-BBc 06-BBc 06-BBc 06-BBc 06-BBa 06-BBa 06-BBa 06-BBa 06-BBa 06-BBa 06-BB 06-BB 06-BB 06-BB 06-BB 06-BB 06-BB 06-BBa 06-BBb 06-BBb 06-BBb 06-BBb 06-BBb 06-BBb MODEL PA-18 PA-18 PA-18 PA-18 PA-20 PA-20S PA-22 PA-22 PA-22 PA-22 PA-22S PA-22S PA-22S PA-24 PA-24 PA-24 PA-24 PA-24 PA-24 PA-28 PA-28 PA-28 PA-28 PA-28 PA-28 PA-28 PA-30 PA-32 PA-32 PA-32 PA-32 PA-32 PA-32 135 135 108 135 150 160 160 135 150 180 250 260 400 260B 260C 140 150 151 160 161 180 181 260 300 301 260B 260C 260D A AS S AIRCRAFT S/N ALL SN ALL SN ALL SN 18-1215-18309025 934 & Up ALL SN ALL SN 1021, 1022, 1024 AND UP ALL SN ALL SN ALL SN ALL SN ALL SN 103-243687 ALL SN ALL SN ALL SN ALL SN * Call For 4247-4300 ALL ALL ALL ALL ALL SN SN SN SN SN BOX MODEL 260E 300B 300C 300D 300E 301T 300 (C/R) 235 236 140B 140C 140D 140E 150B 150C 160B 160C 160S 180B 180C 180D 180E 180F 180G 201T B-235 C-235 D-235 E-235 F-235 150 200 201 201T 201T 180 B C 06-BBb PA-32 06-BBb PA-32 06-BBb PA-32 06-BBb PA-32 06-BBb PA-32S 06-BB PA-32 06-BBb PA-32S 06-BBa PA-39 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28 06-BB PA-28R 06-BB PA-28R 06-BB PA-28R 06-BB PA-28R 06-BB PA-28RT 06-BB PA-28S 06-BBa PA-30 06-BBa PA-30 AIRCRAFT S/N ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN ALL SN
Battery Box Bumper Seal. 1103M foam with sticky back. Mil Spec: AMS3195E Bumper Seal 1 P/N 11-05613 ............................ $4.95 Bumper Seal 1-1/2 P/N 11-05612 ............................ $4.95
Special Tester designed for testing aircraft batteries. Requires only small amount of fluid & ideal for close quarters. Float calibrated from 1.100-1.300 Sp. Gr. in 5 intervals. ................. P/N 11-01674............. $24.50
This simple locking device is designed to disable the battery from the electrial system which cuts off all power to the aircraft unattended many pilots disconnect the battery and locck the panel door. However, many panel locks are easy to pick and pry open. If a thief is able to unlock the panel door, it is simple to reconnect the battery. Then all on would have to do is go inside the plane through the emergency door, which is often left unlocked with a key, the engine can easily be started and the plane can be flown away. The batter lock is constructed using a tough space age plastic polymer and a seven pin round ball bearing lock that is impossible to pick which in turn prevents aircaft theft and increases security. ....... P/N 11-02753 ........... $319.95 The Battery Mat is the worlds only acid neutralizing and absorbing mat designed for use beneath any lead-acid battery. Each mat is simple, efficient, and cost-effective. Its ideal for use with all aircraft, as well as standard and heavy duty equipment. The acid-neutralizing and absorbing fabric is patented and manufactured with recycle material in the U.S. Battery Mat absorbs and neutralizes battery acid that may leak or result from a boil over, prevents corrosion, cushions vibration shock, is simple to use and install, and is safe to handle. Width: 12. Sold by linear ft. P/N 11-00170...........$4.95 Ft Improve Starting Performance. Easier Removal & Installation of Battery. May prolong life of battery and starter. Less expensive to modify existing box than to replace. Compatible with our famous Low Loss Cable Kits! Eliminate extra connection on outside of the battery box. Do away with the troublesome braided negative strap. Nylon Flanges replacement or experimental..... P/N 11-02892.... $37.50 Nylon Flanges STCd / PMAd........................... P/N 11-02893.... $51.90
BATTERY MAT
28-771600128-8216236 ALL ALL ALL ALL ALL ALL ALL ALL ALL SN SN SN SN SN SN SN SN SN
06-BB White ....................................P/N 06-BB Stainless ...............................P/N 06-BB Black.....................................P/N 06-BBA White ..................................P/N 06-BBA Black ..................................P/N 06-BBA Stainless ............................P/N 06-BBB White ..................................P/N 06-BBB Black ..................................P/N 06-BBB Stainless ............................P/N 06-BBC White..................................P/N 06-BBC Black ..................................P/N 06-BBC Stainless ............................P/N
Prices Subject to Change Without Notice
11-06951 .....................$569.00 11-04420 .....................$525.00 11-04421 .....................$556.00 11-06952 .....................$631.00 11-06953 .....................$618.00 11-06954 .....................$583.00 11-06955 .....................$631.00 11-06956 .....................$618.00 11-06957 .....................$583.00 11-06959 .....................$631.00 11-06958 .....................$618.00 11-06960 .....................$583.00
Aircraft using Concord CB-35A and RG-35A batteries must install two PN 1-1-6 adapter plates to the battery posts before completing the Battery Box Modification. These adapter plates raise the battery post height to equal the post height of standard G-35 series batteries. P/N 11-02891............$39.50
511
BATTERY CHARGERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Over 70 years of manufacturing experience assures, the user of the finest line of battery chargerssolid state circuitry, non-aging silicon rectifiers at low prices. All chargers furnished with complete operating instructions. One year warranty
JAC1212, JAC0524, & JAC0724 - Fully Automatic - World-Wide Universal Input, Electronic ChargerIntelligent chargers follow battery impedance to end of charge cycle for all battery types. Fully automatic. Red LED P/N 11-00885 indicates AC power on, yellow LED indicates Shown battery is charging, green LED indicates float mode. Aluminum case. Amps Volts Size Weight Part No. Price 12 12 6.5W x 3.5H x 1.8D 1.8 lbs. 11-00890 (2) $76.65 5 24 6.5W x 3.5H x 1.8D 1.8 lbs. 11-00885 (1) $79.50 7 24 6.5W x 3.5H x 1.8D 1.8 lbs. 11-00889 (1) $89.75 (1) DC cordsets 3 long: with ring terminals or XLR connector. (2) With stripped leads MODEL JAC2024H - Intelligent chargers follow battery impedance to end of charge cycle for all battery types. Fully automatic. Green LED indicates AC power on, yellow LED indicates battery is charging, yellow LED off indicates float mode. Charge control: constant current charge to a constant voltage, then to a float standby. Current limiting. Fully automatic 3 stage charger can be left on the battery in maintaining/float mode. Can be set for any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries. Cyclic voltage: FLOODED 2.5 volts/cell; GEL & AGM 2.4 volts/cell. 2.6 volts/cell for 36 & 48 volt batteries. May be preset to customers specification for battery type. Not intended for use as a DC power supply. Continuous - 100% duty cycle. Low voltage start: will start charging a deeply discharged battery with terminal voltage less than 4 volts. Reverse polarity and short circuit proof. Aluminum case. AC Input 115/230 volts, 50 or 60Hz Input voltage autosensed. 20 AMPS / 24 Volts. 10W x 7.5H x 3D. 6.5 lbs P/N 11-00891 ............. $268.95 MANUAL CHARGERS
Manual chargers must be disconnected when battery is charged to prevent overcharging and damage to the battery. Normal indcation that battery is charged is when ammeter stabilizes for one hour.
The Battery Maintainer is the best device available to ensure that your battery will always be topped off and fully charged. It has the capacity to keep any 12 volt battery charged with as little as one full hour of sunlight per day. The life of your battery will be dramatically extended by using the Battery Maintainer. It features a diode to prevent the battery from discharging on cloudy days or at night. It is constructed with a glass face and black molded base. Size: 5-1/4 x 11 x 3/8 thick. Output: 100 ma 16 VDC full sunlight. Connects to battery via 12V hot cigarette lighter plug in aircraft. For 24 volt use two units. LED Light not included. P/N 01-28312 .......... $42.85 Accessories Part No. Price DC CIG Jack W/Cover & Fuse Wiring 11-06356 $11.00 DC CIG Jack W/Cover (Tabs for Wiring) 11-06357 $9.00 Bracket 11-06358 $3.25 Inline DC Jack 11-06359 $3.00 Cover 11-06360 $1.95 DC Power Plug 11-06361 $4.75 Clamp Red+black Battery Clamp W/Wiring 11-06362 $14.95 Eyelet Red+Black Battery Eyelet Connection 11-06363 $12.99 W/Wiring Fused Pre-Wired 24VDC Power Point (With 11-06364 $29.95 Jacks installed) Fused Pre-Wired 12VDC Power Point (With 11-06365 $29.95 Jacks Installed) 12FT Soloar panel Extension Cable 11-06366 $19.95
This fully automatic charger can be left on the battery indefinitely. Features include indicator lights, overload protection, reverse polarity protection, and small size (4 x 3 x 2). Charges, maintains, and conditions 12V batteries in stored vehicles, such as aircraft, cars, motorcycles, mowers, etc. Ten foot long cordset includes quick change battery clips and ring terminals. Wt: 2 lbs. P/N 11-04407 ........................... $31.80
Solargizer is the only one of its kind in the world. It is not a battery charger, but a proven, patented electronic device designed to eliminate the #1 cause of battery problems and failures sulfation. Whether you deal with aircraft, ground equipment, or virtually any other type of vehicle, Solargizer will dramatically extend the like of your battery, increase performance efficiency, reduce recharge time, extend battery capacity so your battery runs longer between charges, and even maintain a charge indefinitely no matter how long your aircraft or vehicle sits unused. Solargizer is small, weatherproof, and easy to install. Because it keeps batteries in optimum working condition, the Solargizer system helps reduce downtime, battery maintenance and replacement costs. And it even protects our environment by reducing the number of batteries needlessly discarded every year. 24 Volt w/ Battery Clamps ........................P/N 11-11692 ........ $267.95
Keep cellphones and all personal devices charged. When electricity is unavailable simple attach 12volt (car style) adapter to the handheld power pack, plug in and go stay connected 300 hours of talk/standby time (Results may vary) 9 AA Batteries included. P/N 11-04739 .......$39.95
Instant and accurate battery condition status: indicates if battery is healthy or in need of charging Instant status of your alternator/charging system: determines whether battery or alternator is at fault. Non-Aviation / Not for Aircraft. P/N 11-04302 ..................... $16.75 The ZEUS Power Bank is a portable battery charger that can charge many electronic devices via USB port, such as MP3 players, mobile phones, cameras, portable gaming devices, and other USB compatible devices. The ZEUS Power Bank comes with everything you see in the photo , a user guide and travel bag. Its easy, portable and perfect for anyone on the go! Ideal for long flights, outdoor activities where anytime anywhere remote charging is needed. NOTE: Recharge the power bank through any computer via USB port or with a 5V wall adaptor. Not all USB Wall chargers will work with the power bank and it may be damaged if not charged with a compatible USB power source. P/N 11-09964 ...................... $59.95
The Xtreme Charge X2 is a dual-station, 12-volt maintenance charger. The Xtreme Charge X2, works with all types and sizes of 12-volt lead-acid batteries. P/N 11-06866 ........ $169.95 Your Battery M.D. Portable and cordless the BC3000 is a lightweight fully automated battery analyzer assessing the health of all lead-acid aircraft batteries with an ampere hour range of 1-59. Connect the battery using the included quick battery connection adapters, the unit automatically senses and selects 12 or 24 volts, set the battery rating and press start, thats it. One hour later your test is complete and the health of your battery is displayed P/N 08-07161 ..............................$1,343.00 PERFECT COMPANION FOR MRX! A home and auto charger perfect for charging on the go. Charges 2 or 4 AA and AAA batteries in 2-3 hours at home or away. Comes with 4 AA batteries and both car power adaptor & home charge adaptor. Charge indicators show when batteries are ready. "Trickle charge" capability keeps batteries at full charge. P/N 11-04524 .....................$20.75
512
Plug n Run - No buttons to push! Precision-set for Standard Aviation Batteries and using an array of microprocessor controlled sensors. Actively monitor your batterys voltage, amperage acceptance and temperature at all times. When used as a maintainer, it is guaranteed to maximize your batterys life and storage capacity. The temperature compensated long-term float (maintenance) stage can add years of service, and patented full-time high frequency sweep pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure. One-year 100% money back guarantee, five-year no hassle warranty. Qualifies for FREE DMM - See details on this page. BatteryMINDer 12248-AA-S2 ............... P/N 11-07739 .............. $189.95 BatteryMINDer 12248-AA-S3 ............... P/N 11-07742 .............. $189.95 BatteryMINDer 24041-AA-S2 ............... P/N 11-07740 .............. $195.00 BatteryMINDer 24041-AA-S3 ............... P/N 11-07741 .............. $195.00
CM WP ME HA AP LG EP CS
Plug n Run - No buttons to push! 220-240 Volt versions of the 12-V and 24-V are available. Specific to sealed or wet aircraft batteries only. CE Approved, with easily replaceable cord set to match country of use. Designed in concert with Concorde, Gill and Odyssey. One-year 100% money back guarantee, five-year no hassle warranty. BatteryMINDer E12248-AA-S2 ............. P/N 11-09379 .............. $197.95 BatteryMINDer E12248-AA-S3 ............. P/N 11-09380 .............. $197.95 BatteryMINDer E24041-AA-S2 ............. P/N 11-09381 .............. $197.95 BatteryMINDer E24041-AA-S3 ............. P/N 11-09382 .............. $197.95 For your car, truck, boat, motorcycle, motorhome golf car, farm equipment, ATV, an more!
Supplies up to 25 amps of ground power from 100-240 VAC, as far as 300 feet (91.44 meters) from the source. Approved by the major aircraft battery manufacturers in the U.S., it safely charges all 24 Volt sealed, AGM, Gell and flooded (wet cell) lead-acid batteries including Optima, Odyssey and Interstate AGMs. Also for two 12 Volt series-connected. Dedicated desulfation, optional equalization and long-term float (maintenance) mode help recover lost capacity enabling many marginal batteries to pass FAA airworthiness test. Power supply mode enables use of glass panel displays and other avionic electronics without draining your battery. LCD panel shows battery voltage, amperage, temperature, time and amp-hour acceptance. One-year 100% money back guarantee, fiveyear no hassle warranty. Qualifies for FREE DMM - See details on this page. BatteryMINDer 28252-AA ..................... P/N 11-09378 .............. $889.00
5- STAGE CONSTANT CURRENT-VOLTAGE CHARGER / MAINTAINER / DESULFATOR - Microprocessor controlled. For all sealed, AGM, Gell and flooded (wet cell) lead-acid batteries including Optima, Odyssey and Interstate AGMs. Actively monitors your batterys voltage, amperage acceptance and temperature at all times, these chargers work through a series of charging and diagnostics stages. When used as a maintainer, it is guaranteed to maximize your batterys life and storage capacity. The temperature compensated long-term float (maintenance) stage can add years of service, and patented full-time high frequency sweep pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure. Not for Aviation. One-year 100% money back guarantee, five-year no hassle warranty. Qualifies for FREE DMM - See details on this page. BatteryMINDer 12248 (12V) ................. P/N 11-02006 ............. $142.95 BatteryMINDer 24041 (24V) ................. P/N 11-02007 ............. $145.95 POWER SUPPLY / CHARGER / MAINTAINER / DESULFATOR - For all 24V sealed, AGM, Gell and flooded (wet cell) leadacid batteries including Optima, Odyssey and Interstate AGMs. Also for two 12 Volt seriesconnected. Actively monitors your batterys voltage, amperage acceptance and temperature at all times. When used as a maintainer, it is guaranteed to maximize your batterys life and storage capacity. The temperature compensated longterm float (maintenance) stage can add years of service, and patented high frequency sweep pulse desulfation is designed to reverse and eliminate battery sulfation, the #1 cause of early battery failure. Supplies up to 25 amps of power from 100-240 VAC. Dedicated desulfation, optional equalization and the long-term float (maintenance) mode help recover lost capacity. LCD panel shows battery voltage, amperage, temperature, time and amphour acceptance. Not for Aviation. One-year 100% money back guarantee, five-year no hassle warranty. Qualifies for FREE DMM - See details on this page. BatteryMINDer 28252 ........................... P/N 11-09897 .............. $879.00
#1 1 2 3 4 5
#2
#3
#4
Accessories for use with 28252-AA ONLY 11-09561 ELCTC ELCON Type Connector optional ABS-2825 Temperature/Voltage 11-09558 included Sensor A2ELCON Anderson Gray to 11-09559 optional ELCON-type 11-09560 A2RT 11/32 Ring Terminals optional A2GPU-1 Anderson to Cessna-type 11-09562 optional GPU Plug Assembly
IN EL AV TO PS BV
12-V / 24-V w/15A Pwr Plug. Works with ALL BatteryMINDer products. P/N 11-07209 ....................$9.75
12 VOLT 1.33 AMP CHARGER-MAINTAINER-CONDITIONER (DESULFATOR) - A 3-mode maintenance charger -desulfator that extends performance and life of all types and sizes of 12 Volt lead acid batteries. It automatically dissolves harmful power-robbing sulfation using safe, low voltage, patented, high-frequency pulse technology3. Included Accessories: Battery Clip Cord Set with Qwik Connect, Ring Terminal Cord Set with Qwik Connect BatteryMINDer 12117 ........................... P/N 11-11671 ................ $49.50 BATTERY AND ALTERNATOR CONDITION TESTER - Instant and accurate battery condition status: indicates if battery is healthy or in need of charging or replacement. Determines whether battery or alternator is at fault. Non-Aviation / Not for Aircraft. ..... P/N 11-04302 ................ $16.75
513
An early warning detection system that is simple, flawless, & reliable. Detects alternator failure, broken/slipping belts, leaky diodes, regulator failure or if you forgot to turn OFF the master switch after tie down. Uses a reliable MicroCircuit and will never need repair. Has a pulsing red panel mounted LED that is larger and 15 times brighter than normal LEDs and will alert you at the first sign of trouble. Weighs only 1.5 oz. and installs quickly. The LED begins to pulse every time you first turn on the master switch and hit the starter key/button and will go out as the Alternator/Generator comes on so you know everything is alright before you depart. First Alert is now armed & ready to detect any in-flight electrical problems. Size: 3.25 length x 2 width x 1.25 height. Indicate your aircraft voltage when ordering. P/N 11-01259 .............$159.00
KWIKSTART MODEL 6255 - Exclusive Heavy-Duty Sealed Lead Acid/AGM Battery. Built-in Charger recharges unit with AC cord (included). Instantly Jump-Starts WITHOUT the need for another vehicle. 12 Volt DC Accessory Outlet to Power and/or recharge DC Electronics. 1700 Peak Amps. LED Battery Status Indicator. 32 Heavy-Duty Cables for True Portability and Technician Ease of Use. Unit includes DC to DC cigarette lighter cord Patented. Weight: 22 LBS P/N 11-08698 .............$179.00 MODEL 6275 KWIKSTART - Two 12 Volt 22 AH Heavy-Duty Sealed Lead Acid/AGM Battery provides Best in Class Performance. Smart 1000 mA Internal Charger with Built-In Overcharge Protection - Prolongs battery life. Up to 100 Hours of Portable 12 Volt DC. Two Position ON/OFF Switch with Easy-to-Read LED Battery Status Indicator. 12 Volt DC Accessory Outlet to Power and/or Recharge DC Electronics. Heavy Duty Clamps with 2AWG 66 Long Cables. Use Any Standard Extension Cord to Charge. Unit includes DC to DC cigarette lighter cord. P/N 11-08699 .............$343.95 MODEL 6295 KWIKSTART - Two 12 Volt 22 AH Heavy-Duty Sealed Lead Acid/AGM Battery provides Best in Class Performance. Jump start 24 volt systems with over 700 CCA of power. Smart 1000 mA Internal Charger with Built-In Overcharge Protection - Prolongs battery life. Up to 100 Hours of Portable 12 Volt DC. Three Position 24V/OFF/12V Switch with Easy-to-Read LED Battery Status Indicator. 12 Volt DC Accessory Outlet to Power and/or Recharge DC Electronics. Heavy Duty Clamps with 2AWG 66 Long Cables. Use Any Standard Extension Cord to Charge. Unit includes DC to DC cigarette lighter cord P/N 11-08701 .............$441.95
Flexible thin clear Fiber, that is energized by the inverter designed by AvTek. The fiber needs 66Vac at a specific frequency which when energized develops this Cool-Blue-Neon, that is embedded in the substrate. The gas is NOT free flowing. Use your imagination and Light YOUR panel the way you want. Unlike other panel lighting that comes ONLY in round screw-on White Light Filaments. Each five foot TekLitez Fiber is Snap connected at the inverteryou can purchase one or more or add more in the future. 9 v Battery or you can connect to your buss, and use your own dimmer. TekLitez allows you to illuminate Square instruments. Use under the panel for better chart reading. Snap to install. The small thin E.L.F. is Super-Glued into place. The inverters is 2 cube, which goes anywhere behind the panel. Sold in 5 foot lengths per kit which will illuminate approx 5 or 6 large round instruments (includes inverter). Life expectancy is over 80,000 hours. TekLitez Sold ONLY at Aircraft Spruce. Has No FAA-PMA intended for Experimental Aircraft. Consult your I/A or FSDO before installing. 9 Volt Battery, No alteration. Owner Install. Can be wired into panel dimmer switch. P/N 11-07169.......................... $115.95
AVTEK TEKLITEZ
Do your Panel Instruments Bounce and become erratic? Does your Starter turn your Engine SLOWLY and you have a new fully charged battery? Do you see an ugly corroded Battery Post soon after you clean the Post? These are symptoms of BAD Ground/Bonds. When the Resistive Corrosion is developed at the Starter the result is slow turning during starts. Mechanics miss-diagnosing the problem and a NEW Starter is purchased needlessly. Kit includes: * FAA-APPROVAL * Three (3) Jumper One for the panel, starter and your battery...and Aluminum Fasteners * DVD step by step how to Power-Point Presentation * Sealant . P/N 11-07359 ......$125.50
1.25A. The Battery Tender Plus is a 1.25 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Included is a quick connect harness for hard to reach areas. *DO NOT USE P/N 11-03015 WITH GILL OR CONCORDE AVIATION BATTERIES. Voltage Amps Description Part No. Price 6Volt 1.25A Battery Tender Charger 11-04085 $42.85 12Volt 1.25A Battery Tender Charger 11-03157 $43.75 POWER TENDER PLUS - 12V @ 5A 24V @ 2.5A WATERPROOF, Shock & Vibration Resistant, Lightweight (LESS THAN 4 POUNDS), compact charger designed for either portable operation or permanent mounting. Charges and maintains both flooded and sealed, maintenance free, AGM, lead acid batteries. Float / Maintenance function maintains batteries at proper storage voltage without the damaging effects caused by trickled chargers. The Power Tender PLUS is easy to use, its rugged, its compact, its packed with power, and its backed by the reputation of the undisputed battery charger industry leader, DELTRAN. Note: Part does not come the Alligator clips. PN 11-06403. Note: Not for use with Gill or Concorde Aviation Batteries. Voltage Amps Description Part No. Price 12Volt 5A Power Tender Plus 11-03016 $81.95 24Volt 2.5A Power Tender Plus 11-03015 $79.95 Power Tender Alligator Clip ................. P/N 11-06403....................$4.35 120 VAC /60 Hz input. Includes Ring Terminals and Alligator Clips with BLACK (6V & 12V) QDC. Note: Not for use with Gill or Concorde Aviation Batteries. 6V, .750 Amps................ P/N 11-05163 .....$29.85 12V, .750Amps ............... P/N 11-05164 .....$29.95
This 12V female cigarette lighter receptacle is made from stainless steel and is ideal or homebuilt panels. 292568 P/N 11-01294 .............$8.90
This is a kit that comes with a FAA-TSO Approved Cigarette lighter power adapter and plug-in USB 5V converter. Just Plug in your USB socket into your Cigarette Lighter Power Adapter and get 5 volt USB power out. Lone Star Aviations FAA-TSO approved Power Adapter is an exciting new product that will aid pilots, crew and passengers with a new power option to operate or charge many consumer devices. Examples include: Charging Cell-SAT Phones, iPad, iPhone, iPods, MP3 Players, Bose, Zulu Headsets. P/N 11-09492 ......$129.50
Perfect for portable GPS systems, cell phone chargers, laptop power supplies, or anything else you would plug into your car during a road trip. 12V Aircraft: If your aircraft runs on 12V you will not need any extra equipment to operate 12V equipment, and it comes with a a rubber cap marked with DC12V. 24V Aircraft: Please note, you will need a 28V to 12V convertor to power most 12 volt consumer electronic devices. Non TSOd .......................................................P/N 11-04862 .......... $59.85 TSOd ..........................................................P/N 11-09432 .......... $84.95 DC Converter 28-14VDC TSO ....................P/N 11-03309 ........ $249.95 SD Converter 24-13.8VDC TSO .................P/N 11-04894 ........ $499.95
514
CHARGERS - APUS
OPTIMATE DIAGNOSTIC DESULFATING CHARGERS AND TESTERS
Designed to supply filtered DC bus power through standard APU receptacle in private and commercial aircraft. Up to 25 or 50 amp is available for operating avionics and flight control systems when the master switch is activated. It can also charge the battery through the plug at a 10 amp rate. Output is current limited, and will withstand starting loads. Voltage is limited to prevent battery overcharging. DC Current and voltage are displayed on panel meters, voltage accurate to 00.00 NOTE: Available with piper plug too.
Model P/N DC DC Amps Volts 25 25 25 14 28 28 AC Power 117 volts 60hz. 3 amps 117 volts 60hz. 6 amps 117 volts 60hz. 6 amps Dimensions Wt. H.W.D. 8.5x10x12 8.5x10x12 8.5x10x12 Price Piper Plug 11-07068 APU14v/25A Piper Plug 11-07067 APU28v/25A Cessna Plug 11-08146 APU28V/25A 22 $645.00 33 $696.00 33 $696.00
CM WP ME HA AP LG EP
25 amps of auxiliary power to prevent battery drain while checking aircraft controls and avionics. Battery status is monitored by a digital volt meter accurate to 00.00, and a Tri-color LED. If left connected, will charge and fully maintain battery. Available with plug as shown, or Piper plug. Plugs into standard 117v 60 Hz. receptacle. Max current draw, 6 amps on 24 volt model (APU24v/25A), 3 amps on 12 volt model, (APU12v/25A). Warranty: (3) years. Charger with Plug 12V.............................P/N 11-05662 ............ $596.00 Charger with Plug 24V.............................P/N 11-05661 ............ $695.00
SOLAR PULSE
CS IN EL AV TO PS BV
OPTIMATE PRO-S has a charging system able to save a neglected *sulfated battery that cannot accept charge from a standard charger or the engine charging system. Battery power is optimized during bulk, absorption & cell balancing charge modes, and then tested to verify charge retention. Battery life is extended if left connected to OptiMate PRO-S when vehicle/craft/equipment is not in use. Initializes, desulfates & charges 1 x 12V battery at a time from small to large. P/N 11-07222......................... $166.50 OPTIMATE PRO-2 OptiMate PRO-2 initializes, desulfates & charges 2 x 12V batteries at a time or a 24V system, made up of 2 x 12V batteries. The OptiMate Pro-2 has two independent charging systems able to save a neglected *sulfated battery that cannot accept charge from a standard charger or the engine charging system. Battery power is optimized during bulk, absorption & cell balancing charge modes, and then tested to verify charge retention. Battery life is extended if left connected to OptiMate PRO2 when vehicle/craft/equipment is not in use. Note: This charger cannot be used on a 24V battery. A battery discharged over time that has built up chemical resistance to charging, but otherwise undamaged and measuring at least 2V. PN 11-07223.......................... $236.95 *A battery discharged over time that has built up chemical resistance to charging, but otherwise undamaged and measuring at least 2V.
* Unique solar charger provides clean, quiet energy * Cleans battery plates of large, damaging lead-sulfates so batteries can accept, store and release MAXIMUM power when you need it * Helps offset energy-robbing key-off parasitic loads (see chart below) * Works with all lead-acid batteries (flooded cell, AGM and gel) * Ideal for virtually any kind of vehicle and equipment in areas with out access to electrical power * Low-profile industrial-strength solar panel mounts flat (no frame required) so its virtually indestructible * Prevents the normal loss of battery power on vehicles stored out side no matter how long they sit unused even months at a time * Helps extend battery life up to 3X longer * Choose from three models: 2-Watt, 5-Watt and 6-Watt * The 5-Watt solar panel is almost HALF THE SIZE of other 5-watt panels yet offers full 5-watt power * The smaller 5-watt panel provides more installation options * The 6-watt model is ideal for emergency rescue and law enforcement vehicles because it has a unique rectangular solar panel designed to easily mount on any light bar * 2- and 5-Watt models include 17-feet of wire between circuit box and solar panel, and the 6-Watt includes 14 feet of wire * Five-year limited warranty 2WATT ................P/N 11-07120 ...........$89.95 5WATT.................P/N 11-07121 .........$159.95
The PulseTech Pro-12 Charge/Maintenance System. It is designed to keep new batteries factory-fresh while they rest on the shelf waiting to be installed or sold. Batteries that sit idle suffer from damaging sulfation buildup (lead sulfate deposits on the battery plates). This buildup is the main cause of battery problems and failure. The Pro-12 uses our scientifically-proven ReNew-IT Pulse Technology to keep these deposits off the plates. By removing these energydampening deposits, your batteries are stronger than ever. This means your shelf-life warranty issues and other battery-related expenses are reduced dramatically. P/N 11-07122 ............................$174.95
515
Aerovoltz Lithium Iron Phosphate batteries are designed to replace the lead acid batteries that currently power most of the two and four cycle engines in Aviation. Features: Up to 80% smaller than the stock battery. Up to 10 lbs. lighter than the stock battery. Designed, developed, and assembled in the USA. Completely dry technology so batteries can be mounted in any direction. Non-toxic and recyclable. Impact and water resistent. No special charger required Description Part No. Price Aerovoltz Lithium Battery (EVO2-4 CELL) 11-10028 $99.00 Aerovoltz Lithium Battery (EVO2-8 CELL) 11-10029 $156.50 Aerovoltz Lithium Battery (EVO2-12 CELL) 11-10030 $179.95 Aerovoltz Lithium Battery (EVO2-16 CELL) 11-10031 $269.00 Aerovoltz Battert Management System 11-10032 $78.85 Balance Charger (120 volt) The Aerovoltz battery charger system is the only charger on the market designed specifically to work with the Aerovoltz EVO2 battery. The balance mode balances the voltage of each cell or cell pack while charging. The primary advantage of the balance charger is the balance charging funciton. Features: Plugs directly into the batteries BMS port. Able to balance charge all the cells individually for max power and durability. Can double the expected life of the EVO2 battery. Has Charge, Fast Charge, Balance Charge, and Storage Charge Functions. Specifications: 14.5-16V Balance Charger Kit-120 V. P/N 11-10032 ....................$78.85
Compact, lightweight and highly portable power units. Red Box systems may be carried safely on board all aircraft. They are designed to give continuous high quality DC power for crew training, aircraft servicing in the workshop, on the ramp or in the field. This continuous power supply is ideal for diagnostic work, pre-flight checks or for continuous powering of equipment during operations, without draining the onboard aircraft batteries. There is a range of built in safety features and the units are simple to use. This switchable unit will produce a steady 14.4 or 28.8 Volts up to the fully rated output current with power factor correction. The power supplies are multi-fan cooled with built-in thermal management for operation up to 50C ambient environments. The safety features include over current and short circuit protection. The power modules conform to EMC standards for noise emissions and immunity. Model RBP525 RBP550 RBP575 RBPS100 TOWBAR Description 25 Amp Power Unit 50 Amp Power Unit 75 Amp Power Unit 100 Amp Power Unit Towbar Part No. 11-09824 11-09825 11-09826 11-09827 11-09828 Price $1,056.00 $1,463.00 $2,113.00 $2,875.00 $163.00 $455.00
Watts 10 20 40
The Zamp Kicker Battery Maintainer is designed to fully charge and maintain a battery at proper voltages without the damaging effects caused by unattended bench top and trickle chargers. The Zamp Kicker correctly charges any type of lead-acid, gel and AGM battery. Zamp Kicker Battery Maintainer available in 10 watt or 20 watt. Includes: Solar panel mounts, hardware, connectors, wire, and charge controller and 6 amp waterproof controller. Amps Dimensions Part No. Price 6 11w x 13l x 1h 11-10027 $169.00 6 16.4:w x 17.5w x 1h 11-10026 $243.00 Dim. closed: 16w x 17L x 3h 6 11-10025 $338.00 Dim. open: 32w x 17L x 1.5h
These are a micro processor-controlled low battery alarm. The purpose of this product is to alert you of low battery voltage. This will allow you to prevent damage to the battery. Featuring a wide range of settings, the Low Battery Alarm can be preset to meet voltage specifications. The device comes with an LED indicator for visual reading along with a buzzer to warn of low voltage. Multi-color LED configurations indicates the battery status. Applications: Battery Backup Systems, RV house batteries, Trolling motor battery, Marine batteries, Auxiliary Power Units (APU), Travel trailers, Power gate backup battery, Generator battery, Battery backup safety equipment, Bass Boat Central Approved Manufacturer, Bass Boat Supplies and Accessories. Low Battery Alarm XL (5V to 24V) ..............P/N 11-10010 .....$34.95 Low Battery Alarm XXL (6V to 36V) ...........P/N 11-10011 .....$57.85
The 6.5-watt portable solar pack module offers a unique solution for reliable and portable solar power for cell phones, PDAs, and other small personal electronics. The SUNLINQ 6.5-watt weighs less than half of a pound and when folded is compact, lightweight and easily stored and transported. The low maintenance design provides an optimal electrical path and rugged durability. Built-in grommets allow for hanging, mounting or laying in any position. The 12-watt portable solar pack module offers a unique solution for reliable and portable solar power for Sat phones, GPS, battery charging, etc. The SUNLINQ 12 watt weighs less than one pound and when folded is compact, lightweight and easily stored and transported. The low maintenance design provides an optimal electrical path and rugged durability. Built-in grommets allow for hanging, mounting or laying in any position. The 25-watt portable solar pack module offers a unique solution for reliable and portable solar power for vehicle battery charging, including boats and RVs and laptop computers. The SUNLINQ 25 watt weighs less than two pounds and when folded is compact, lightweight and easily stored and transported. The 25-watt SUNLINQ is made from a special urethane material giving it the utmost in durability and water resistance. The low maintenance design provides an optimal electrical path and rugged durability. Built-in grommets allow for hanging, mounting or laying in any position. Cables included with SUNLINQ are one each, CLA receptacle, CLA vehicle power outlet, battery clamps, 4 in. barrel connector, and 8 ft. extension cable. Description Part No. Price SUNLINQ 6.5 WATT Module 11-06192 $93.50 SUNLINQ 12 WATT Module 11-06193 $189.95 SUNLINQ 25 WATT Module 11-06194 $386.95
516
QUICK CHANGE TROLLEY The Start Pac QC trolley is a light weight accessory for either the Start Pac Models 1324-2QC, 1628QC, 2300QC or the 6028QC P/N 11-06775 ..........$288.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MODEL 1324-1 QC - * 13 AMP hours @ 10 Amp Hour Rate * 1300 AMPS Peak Current complete with built in charger, power plug and cables. * 15.5x4x11.75 * 35 LBS. Complete * Units are 24 VDC output with a universal charger that will accept 90-240 VAC 50/60 hertz. Will start turbine or piston engines up to 500 horse power. Has a 4.5 amp charger and will provide a charge time of approx. 4 hours. Will give two to three starts between charges. This portable unit is mainly designed for emergency starting in remote locations. This unit is not designed for repeated daily starts or maintenance functions. 1324-1 QC ..........................................P/N 11-04538 .......$1,065.00 1324-1 QC-RBS (Battery Set) ............P/N 11-07231 ..........$524.00
The entire aircraft electrical system can be powered up for GPS programming and electrical maintenance. Thus the on board aircraft battery can be saved for starting. Do not use for starting as starter motors require far more amperage than is available from the StartPac Portable Power Supply. Not for battery charging. Made in the USA.
MODEL 2300 QC - Built in chargers, power plug and cables. 24/26 VDC output, with universal chargers that will accept 90-240 VAC 50/60 hertz. * 26 AMP hours @ 10 Hour Rate * 2300 AMPS Peak Current * Trolley avail. * 19.2x7.5x11.5 * 69 LBS. Complete. For starting engines up to 1500 horse power and give four to six starts between charges. This unit has a dual redundant 4 amp chargers.. When plugged into an AC source, 8 amps at 28VDC, is available for maintenance functions without depleting the batteries. Recharge time is approx. 3-1/2 hours. 2300 QC .............................................P/N 11-06780 .......$2,080.00 2300QC-B (Batteries) .........................P/N 11-06781 ..........$825.00
MODEL 6028 QC - Built in chargers, power plug and cables. Units are 28.5 VDC output, with universal chargers that will accept 90240VAC 50/60 hertz. * 26 AMP hours @ 10 Hour Rate * 2300 AMPS Peak Current * Trolley avail. * 19.2x7.5x11.5 * 77 LBS. Complete. Will start the largest electrically started turbine or piston engines including the Garrett TPE331. Will provide a faster and cooler start than most ships aircraft batteries, thus increasing turbine life. Various maintenance duties can be performed with this pack that requires more than 24 volts for checkout. This unit has dual redundant chargers with a total of 7 amps output with a recharge time of approximately 4 hours. 6028 QC .............................................P/N 11-06783 .......$2,685.00 6028 QC-B (Batteries) ........................P/N 11-07189 .......$1,008.00
MODEL 53105 - Specifications: * Maximum continuous 105 amps +5%. No duty cycle. * AC input 190-240 Volts. * Over current protection. * Over voltage protection. * Over temperature protection. * Forced air cooling. * 8 foot power cable. * Weights 26 lbs./11.80 kilos complete with power cable. * 14.5x7x13.75. A 28.5 Volt continuous DC power supply when plugged into 220Volt single-phase AC power. Will deliver full 105 amp DC output, but will not provide enough current for engine starting. 53105 .............................P/N 11-06834 .......$1,790.00
The following dimensions apply to each of the 3300s: 38x21x20 Handle Height 48. Avoid discharging the batteries completely as damage can result.
MODEL LI2800 QC - A full 28VDC battery pack and will provide superior starts on all electrically-started turbine engines. It has dual, redundant chargers with a total of 7 amps output and a recharge time of approximately 4 hours. * 28 AMP hours @ 10 Hour Rate * 2400 AMPS Peak Current * L 19.2 x W 7.5 x H 9.75 * 46 LBS. Complete. Utilizes the latest technology in Lithium batteries. (can be left in a completely discharged state without causing damage) Li2800 QC ...........................................P/N 11-06782 .......$3,596.00
FOR ADDITIONAL GROUND POWER UNITS PLEASE CALL OR VISIT OUR WEBSITE AT WWW.AIRCRAFTSPRUCE.COM
517
The Bycan PS-1450 Aircraft Ramp Power Supply and Battery Charger is a dual-purpose aircraft flight line service and maintenance tool. The unit has a filtered 14 volt DC power supply with up to 50 amperes capability for tests of aircraft electrical systems and a secondary mode for recharging run-down batteries. The PS-1450 plugs directly into the aircraft APU connector and is tied to the electrical system when the master switch is activated. The battery charging mode is selectable by a front panel switch. The charging process is fully automatic. When the charge is in progress a red LED is illuminated. This is replaced by a green LED when the aircraft battery is fully charged. The on/off switch on the unit also resets the unit. The 28 volt version, PS-2850 provides 50 amperes of filtered DC at 28 volts. Dimensions: 9 x 12 8. Weight: 38lb. Bycan Power Supply/Charger 14V ..............P/N 11-09195 .........$584.00 Bycan Power Supply 14V 50Amps ..............P/N 11-09196 .........$569.00 Bycan Power Supply 14V 50HZ ..................P/N 11-09197 .........$598.00 Bycan Power Supply 14V Piper...................P/N 11-09198 .........$629.00
The all new Patent Pending Start Pac model Li2000QC utilizes the latest technology in Lithium batteries. These batteries provide the same power as the lead-acid type but are 42% lighter and 32% smaller. In addition, lithium batteries have two other major advantages: twice the battery life of leadacid batteries, no sulphation problems (can be left in a discharged state without causing damage to the battery plates). This compact portable Lithium Ion starting unit is a full 28VDC battery pack and will provide superior starts on small to medium size turbine engines. It has a built in charger with a total of 3.5 amps output and a recharge time of approximately 6 hours. Specifications: 20 amp hours at 10 Hour rate, 2400 AMPS Peak Current, 30 lbs. complete, Dimensions: L 16 x W 3.75 x H 12, Patent pending, Not to be used as an aircraft battery charger, Lithium ion batteries can be damaged by deep discharges. Do not run the batteries down below 23 volts, a spike during a start is okay. Voltages below 23 begin the damage to the batteries. At 18 volts, the batteries will be damaged beyond repair..............................................P/N 11-09516 .......$2,625.00
The PS-2850 plugs directly into the aircraft APU connector and is tied to the electrical system when the master switch is activated. The battery charging mode is selectable by a front panel switch. The charging process is fully automatic. When the charge is in progress a red LED is illuminated. A green LED replaces this when the aircraft battery is fully charged. The on/off switch on the unit also resets the unit. The 14-volt version, PS-1450 provides 50 amperes of filtered DC at 14 volts. P/N 11-07870 .........$768.00
The all new Start Pac Model Li2800 QC Twin Pac utilizes the latest technology in Lithium Batteries. These batteries provide the same power as the lead-acid type but are 42% lighter and 32% smaller. The multi-purpose Li2800QC Twin Pac can be easily broken down into 2 separate units for easy transport and shipping. In addition, lithium batteries have two other major advantages: twice the battery life of lead-acid batteries, no sulfation problems (can be left in a discharged state without causing damage). This powerfully versatile Lithium Ion Twin Pac starting unit is a full 28VDC battery pack and will provide superior starts on all electricallystarted turbine engines. It has dual, redundant chargers with a total of 7 amps output and a recharge time of approximately 4 hours. Specifications: 56 AMP hours at 10 hour Rate, 4800 AMPS Peak Current L 19.2 x W 7.5 x H 9.75 each unit, Twin Pac trolley L 19 x W 23 x H 12 not including removable handles 109 lbs. Complete with Twin Pac Trolley, 46 lbs. complete for each unit when separated. Not to be used as an aircraft battery charger Lithium ion batteries can be damaged by deep discharges. Do not run the batteries down below 23 volts, a spike during a start is okay. Voltages below 23 begin the damage to the batteries. At 18 volts, the batteries will be damaged beyond repair. P/N 11-09517 .......$7,421.00
The PS-28100 will furnish up to 100 amps at 28 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory. 100 amperes filtered 28 volt supply. Aircraft APU connectors furnished. Operates from 120/208/220/240 VAC, 60 Hz . 8 foot DC cable furnished. Ferro-resonant regulated supply . DC current limited Front panel meter, controls. Portable, weighs only 62 lb. One year warranty Extensive testing by FBOs. Dimensions:10 x 13 x 9. Weight: 62lb. 28V, 100AMP - Standard Plug ................ P/N 11-07822.............$998.00 28V, 100AMP - Piper Plug....................... P/N 11-07823.............$998.00 28V, 100AMP - Pilatus PC-12 ................. P/N 11-07824.............$998.00 28V, 100AMP - Eclipse E-500 ................. P/N 11-07825.............$975.00
The PS-14100 will furnish up to 100 amps at 14 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory. 100 amperes filtered 14 volt supply. Aircraft APU connectors furnished. Operates from 120/208/220/240 VAC, 60 Hz . 8 foot DC cable furnished. Ferro-resonant regulated supply . DC current limited . Front panel meter, controls . Portable, weighs only 61 lb. One year warranty . Extensive testing by FBOs. Dimensions: 10 x 13 x 9. Weight: 61 lbs. Bycan Power Supply 14V Standard ............ P/N 11-09191 .........$678.00 Bycan Power Supply 100V 50HZ ................ P/N 11-09192 .........$697.00 Bycan Power Supply 14V Piper................... P/N 11-09193 .........$739.00 Bycan Power Supply 100V 50MZ Piper ...... P/N 11-09194 .........$759.00
518
6142 - Jumper Cable with special Piper singlepin plug on one end and alligatorclamps on other end. P/N 6142 ................$219.00
Used on #6141 and #6142 jumper cables. (above) P/N 11-06202 ............... $37.75
These portable power supplies are an excellent way to power your avionics on the ground while you train or practice in the cockpit. Especially helpful in learning how to operate glass cockpit avionics and panel mount GPS units. To use the Portable Power Supply plug the cord into an AC wall outlet, and then connect the 3-pin plug into the external power receptacle on your aircraft. Furnished with Cessna style 3-pin plug. Manufactured in U.S.A. Features: Charge control: constant current charge to a constant voltage then to a float standby. Current Limiting. Fully automatic 3 stage charger can be left on the battery in maintaining/float mode. Can be set for any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries. Continuous - 100% duty cycle. Low voltage start: will start charging a deeply discharged battery with terminal voltage less than 4 volts. Reverse polarity and short circuit proof. Aluminum caset. Includes Battery Clip Adapter. 12V Port Power Supply 3 Pin Plug ...............P/N 11-05084 ........$214.95 12V Port Power Supply Piper .......................P/N 11-05085 ........$194.95 24V Port Power Supply 3 Pin Plug ...............P/N 11-05086 ........$308.00 24V Port Power Supply Piper .......................P/N 11-05087 ........$238.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Mates with 11041 socket. Electrical conductors and connections are designed for maximum efficiency and long life. With ground return terminal. Single pole. Brass female contact with spring-grip tension provides solid engagement with the socket. Cable clamp holds wires firmly in place. Diecast housing. Accepts up to 0AWG cable. P/N 11-03159 ............... $22.75
Self-grounding socket. Single pole. Diecast housing, spring-loaded door. Solid brass contact, 3/8 (9.5mm) diameter, with insulated tip to prevent short circuits. Rubber boot protects terminals and connections. Accepts up to 0AWG cable. Fits 2 (50.8mm) diameter hole. Flange holes 21/64 (8.6mm) diameter, 2 15/16 (74.6mm) on centers. Mates with 11042 plug. P/N 11-00500 ............... $24.85
The Bycan RB-14/28-25 Red Baron APU is designed to operate avionics equipment in private and commercial aircraft. It will output 14 or 28 volts DC at up to 25 amperes. The voltage is filtered to eliminate hum and is regulated against input AC line voltage changes. The output DC voltage and current are displayed on front panel meters. The DC is also protected by a circuit breaker. The RB-14/28-25 plugs directly into the APU receptacle on the aircraft. It comes equipped with either the standard three-prong connector or the Piper coaxial connector. Both connectors can be supplied, optionally at a slight extra cost. DC cable length is 8.The AC line cord is normally 8 in length, but special lengths up to 50 are available. The housing is steel, powder coated in red, for optimum flight line safety. Rubber feet and handle are included. Features: AC Line Voltage: 115v, 60 Hz AC Current Drain: 7 amperes Max DC Output: 14 or 28 volts, up to 25 amperes. Weight: 35 lbs (16 Kg) maximum Size: 10 x 8 x 8 (25 x 20 x 20 cm) Warranty: Two years from date of purchase Regulation: 13.75V 1.5v, 27.5V 2.5v. Standard Connector ......................P/N 11-02142 ...................... $675.00 Piper Connector ............................P/N 11-02143 ...................... $718.00 The Bycan BA-14/2850 Aircraft Ramp Power Supply and Battery Charger is a multi- purpose aircraft flight line service and maintenance tool. The unit has a filtered 14 & 28 volt DC power supply with up to 50 amperes capability for tests of aircraft electrical systems and a secondary mode for recharging run-down batteries. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service. The BA-14/2850 plugs directly into the aircraft APU connector and is tied to the electrical system when the master switch is activated. Selection of output voltage is by a front panel switch which is protected by a switch guard. Closing the guard forces the switch to the 14 volt position. The battery charging mode is selectable by a front panel switch. The charging process is fully automatic. When the charge is in progress a red LED is illuminated. This is replaced by a green LED when the aircraft battery is fully charged. The on/off switch on the unit also resets the unit. Piper & Cessna Plugs 110V (2 Adapters) ....... P/N 11-06390 . $1,495.00 Cessna Plug 220V (1 Adapter) * For Europe .. P/N 11-06391 .$1,595.00 Cessna Plug 220V (1 Adapter) ........................ P/N 11-06392 .$1,495.00 The 2860A GPU represents a dramatic departure in ground power design for aircraft owners, maintenance facilities, and aircraft manufacturers. Its lightweight, easily portable design utilizes the latest high-efficiency switching-mode power technology to provide massive amounts of stable, noise-free DC power from a standard 120-volt AC receptacle. Features: Output: 28 VDC, 60-amps continuous. Stable, noise-free DC power, safe for todays advanced cockpit systems. Digital output meters for both voltage and amperes, with overload warning. Includes detachable output cable with AN2551 compatible connector. Compact, lightweight design utilizes 6 highly efficient digital switching-mode power modules for greater reliability. Built-in cable management with cord winder bumpers. Specifications: Designed for horizontal or vertical operation Input: 105-125 Volts AC, 50-60 Hz, up to 20 amperes Output: 28 +/- 0.5 Volts DC, 60 amperes continuous Weight: 23.8 lbs (10.8 kg) including output cable Dimensions: 7.25H x 14.6 W x 13.75D (18.1 cm x 27.6 cm x 34.9 cm) One Year Limited Warranty P/N 11-09684 .$1,095.00
This external power receptacle is designed to mount in a hole in the skin of aircraft. Hole is then covered with hinged access door (not included). Mates with AN2551 type plugs. Model 4621B. P/N AN2552-3A............ $69.95
The Plug & Jump is a very portable unit which can be carried in the aircraft at all times because it is so lightweight. It can be used to start the aircraft from an ordinary car using standard jumper cables. It comes in two models; The Universal Model is used for Cessna, Beechcraft, etc. (3 pin plug) and the Piper Model is a single pin. The Plug and Jump is a simple conduit of power from any external power source to the aircraft. It is not a battery in and of itself. The Plug n Jump can be used for either 28V or 14V systems. Universal Model ...............................11-00971 ..............................$74.50 Piper Model .....................................11-00972 ..............................$79.50
(Battery Solenoid) - Applicable to all homebuilts. Continuous duty. 12V and 24V. Not for certified aircraft. Features: * High current capacity control * Isolated or grounded coils * Enclosed in dust-resistant case * Longer steel encasement permits lower heat rise and more sensitive operation on Type 71 111-226 (12V)...............................................P/N 11-03161 ..........$24.75 111-226 (24V)...............................................P/N 11-05799 ..........$28.75
MASTER RELAY
(Starter Solenoid) - For 12V intermittent duty. Adequate current capacity for most engines. P/N 11-03162 ............$9.85
STARTER RELAY
519
POWER PANELS
POWER PANELS FOR HOMEBUILTS VERTICAL POWER VP-X
CM
Mini Power Panel
WP ME HA AP LG EP CS IN EL AV TO PS BV
Homebuilders Power Panel Based on a heavy duty printed circuit board that eliminates the bus bars an provides a user serviceable and logical arrangement of all power system components. Only DC rated switches and quality resettable thermal circuit breakers are utilized. Connections to the panels are via screw type terminal blocks. The avionics sub bus is filtered. All metal parts are stamped aluminum. Lexan overlay on the faceplate. Complete documentation and suggested wiring diagrams are included. Standard Power Panel: 8 Switches: Fuel Pump, Landing Light, Strobe Lights, Navigation Lights, Panel Power, Pitot Heat, Radio Master, and a Cessna type split master switch for master solenoid and alternator field control. 18 Circuit Breakers: Fuel Pump, Landing Light, Strobes, Nav Lights, Panel Power, Pitot, Alternator Field, Gyros, Gauges, Trim, and Spare, (on Radio Bus) Radio1, Radio 2, GPS, Transponder, Audio, Avionics. Dims & Wt: 2.25H x 13.00W x 7.50D, approximately 3.0 lbs. Mini Power Panel: 6 Switches: (main panel) Fuel Pump, Landing Light, Strobe Lights, Navigation Lights, Panel Power, (side panel) has a Cessna type split master switch for master solenoid and alternator field control. 13 Circuit Breakers: Fuel Pump, Landing Light, Strobes, Nav Lights, Panel Power, Engine Instruments, & Spare, (on Radio Bus) Radio1, Radio 2, GPS, Transponder, Avionics, (side panel) 30 amp alternator output breaker. Dims & Wt: (main panel) 2.375H x 8.375W x 6.50D, (side panel) 2.375h x 2.5w x 2.0d, approximately 2.5 lbs. Homebuilders Panel ......... P/N 11-11675 ....... $659.00 ea Mini Power Panel .............. P/N 11-11680 ....... $536.00 ea
The Light Sport Power Panel was designed for LSA and light aircraft applications. It offers a new degree of flexibility in modern Glass Panel equipped aircraft. The electrical power bus is split into three segments including the Main Bus, Radio Bus and the Essential bus. The Radio Bus is switched and filtered. The Essential Bus can wire direct to the Main Bus or easily connected to a back up system such as the Composite Design Power Guard to allow dependable, constant power to critical flight and engine instruments. As with all Composite Design power systems, this panel is rugged, serviceable and dependable. Specifications: 6 Switches: Fuel Pump, Landing Lite, Nav Lite, Strobes, Radio Bus Master, and Cessna type split master for Master Solenoid and Alternator Field. 14 Circuit Breakers: Main Bus - Fuel Pump, Landing Lite, Nav Lite, Strobes, Panel Power, Accessories Radio Bus (Filtered) Radio 1, Radio 2, Transponder, GPS, Audio Panel Essential Bus EFIS#1, EFIS#2, Flight Instruments, Engine Data Dimensions & Weight: 2.375H x 10.5W x 6.5D, approx 2.25 pounds. 28V ...................... P/N 11-09207 ............ $598.00 14V ...................... P/N 11-09206 ............ $589.00
The VP-X integrates with many popular EFIS products enabling you to monitor and control your entire electrical system on the EFIS display. In addition using the EFIS for attitude, navigation, and engine information, you now can use the EFIS display to monitor the health of your electrical system, view and control the status of individual circuits, and respond to circuit faults. Vertical Power offers these capabilities through the use of a patented electronic circuit breaker (ECB) technology that is at the core of all of our products. Of course, ECBs provide circuit protection like old-fashion thermal circuit breakers, but ECBs do a lot more than just detect circuit faults. ECBs are intelligent, configurable, and offer capabilities not otherwise available with old-style breakers. For example, ECBs can detect a burned-out landing light or disable the starter circuit while the engine is running. The VP-X supports a single bus electrical architecture with a single or dual alternator configuration. It additionally supports the ability to measure the voltage on an aux battery. There are enough circuits to wire a typical RV (including the RV-10), Glastar, Lancair Legacy, Velocity, Cozy, or other 2 to 4 place aircraft. Specifications: Power: 4-32 volts DC, 60A max continuous Weight: 1.9 lbs Mounting: Includes mounting bracket which attaches on side of VP-X. User can fabricate own mounting bracket as well. Connectors: Three power connectors, Ethernet for configuration, and two 25-pin d-sub connectors Operating Temperature: -25 to +85 deg C Certification: The VP-X is for use only with experimental and light sport aircraft. Note: Either a wiring harness kit or connector-only kit is required with the VP-X system. Vertical Power VP-X-PRO ................... P/N 11-09293 ..............$1,789.00 Vertical Power VP-X Sport .................. P/N 11-09294 ..............$1,189.00 VP-X Pro Wiring Harness .................... P/N 11-09295 .................$395.00 VP-X Sport Wiring Harness ................. P/N 11-09296 .................$365.00 VP-X Sport Connector-Only Kit ........... P/N 11-09834 .................$139.95 VP-X Pro Connector-Only Kit .............. P/N 11-09835 .................$149.95 Crimp Tool (Req. w/ Connector-Only kit) P/N 11-09836 ...................$56.75 The Radio Stack Power Panel is designed to fit neatly in the 6.25 radio stack format. It is well suited for LSA and light aircraft applications, offering a new degree of flexibility in modern Glass Panel equipped aircraft. The power bus is split into three segments including the Main Bus, Radio Bus and the Essential Bus. The Radio Bus is switched and filtered. The Essential Bus can be wired directly to the Main Bus or easily connected to a back up system such as the Composite Design Power Guard. This allows dependable, constant power to critical flight and engine instruments. As with all Composite Design power systems, this panel is rugged, serviceable, and dependable. P/N 11-10081 ........................... $650.00 This Avionics Switch is a solid-state SMT device designed to replace the conventional mechanical relays earlier used. The switch incorporates MOSFET (Metal Oxide Silicon Field Effect Transistor) transistors for switching the high current with no moving parts and no any electrical arc to prevent fuel fumes ignition. The Avionics Switch requires only one toggle switch of any quality and any type to control the power for up to 7A each, different electronic / avionic equipment The Avionics Switch is enclosed in an aluminum enclosure for EMI/RFI protection and for easy installation onto the aircraft. P/N 11-04335 ........................... $152.00
The Power Guard Module manages up to 10 Amps of secondary power for aircraft accessories that require backup power. Typical accessories include electronic ignition, electronic engine/ flight instrumentation and EFIS systems. The module works with a small 7-10 A secondary battery. The on board circuitry includes a secondary battery master relay, primary power controls, filter and charging circuit. Dims: 4.75L x 2.75W x 1.2H ......................... P/N 11-02044 ............ $135.95
520
RC ALLEN ESP
Lone Star Aviations 70 amp filter attenuates EMI-RFI noise generated from alternator, generator systems, gear motors, blowers for a/c systems and other higher current noise sources. The 70 amp filter also can be used to filter the aircrafts avionics buss to filter RF, NAV, GPS, as well as other navigational equipment. The filter is FAA- PMA for certificated aircraft as well as for experimental aircraft. P/N 11-04849 ........$219.75 Lone Star Aviations 100 amp filter (FEED THRU) (Fail Safe Design) attenuates both low and high frequency, (10hz to 30 mhz) of EMI-RFI noise generated from the aircrafts alternator systems to the aircrafts dc buss. This filter, (100 amp Fail Safe design) is used by OEM aircraft manufacturers to attenuate 100% of the on board noise before it penetrates the aircrafts dc buss. The filter is FAA- PMA pending for certificated aircraft but can be used on experimental aircraft. P/N 11-04850 ........$349.95 The Eliminator is a low pass double (LC) PI type filter designed to suppress both low and high frequency line noise. The filter may be connected at the source of the noise or on the input of the effected component. P/N 11-08055 .........$148.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
In the event of aircraft power failure, the MD835 automatically supplies 24.5 VDC power for critical or standby equipment. 4.5 Amp-hour battery with friendly Lithium Nanophosphate cell chemistry Lightweight 4.8 lbs. 8 lbs. less than legacy lead acid designs. Input Voltage: 2432 VDC. 5V module connector available. Direct replacement for PS-835/PS-855 or forward-fit installations. Minimal scheduled maintenance required: 2-year capacity check, 10-year replacement life. Dimensions (approx.): 3.1H x 12.6L x 2.3W Mounts in standard ATR Rack. Maintains full charge by recharging during normal flight operations. Remote mounted self-test switch required. FAA TSO C179 certified. Part 23 AML STC pending. Qualified to RTCA/DO-160F and RTCA/DO-311. Designed and built in the USA. One year limited warranty. MD835 .......................... P/N 11-08713 ..............$3,195.00 5V module connector .... P/N 10-04776 .................$995.00
DC-to-AC static inverter produces 115 volts at 60 Hz for 500 watts of wall outlet power from an aircrafts 28 VDC input. Smaller and lighter than traditional inverters, the MD50 has the same connector and footprint of legacy designs, plus overload and short-circuit protection up to 150 percent of the rated load. Supplies power for various cabin accessories, such as laptops, cell phones and iPods, Compact design. Remote On/Off feature, 500VA rated output power, 85-90% efficiency, Input voltage: 20-36 VDC, Input current: 20A at 28 VDC input, Output voltage: 115 VAC, Frequency: 60 Hz 1%, Single phase, true sine wave output, Overload and short-circuit protection up to 150% of rated load, Rated from -65 Fto +160F (-55C to +71C), FAA TSO-C73 certified and RTCA DO-160F qualified, Designed and built in the USA., USA, Two year limited warranty P/N 11-09613 .........................$2,773.00
The Lone Star Aviation USB 2 Amp Power Converter Plug (LS03-05021) is the updated model of the LS03-05020. Its the same small size but with even more power for onboard charging of iPads, iPhone, iPods, cell phones and most things that use USB power to charge. This model is recommended for iPad owners as it has enough power to charge during heavy use. P/N 11-10454 ...................$49.95
This classic DC to AC solid- state peanut inverter provides a reliable source of 26 volt, 400 Hz, AC power. Versatile, compact and lightweight, it is ideal for use with Stormscope bootstrap and multifunction display installations. Specifications: * Input: 28VDC @ 0.75 amp. (MD26-28) * 14VDC @ .150 amp. (MD26-14). * Output: 26 VAC,400 Hz, Single Phase,
Power Adapter USB Socket. Just plug the USB socket into your Cigarette Lighter Power Adapter and get 5 volt USB power out. Perfect for charging cell phones, iPads, iPods, GPS, PDA, Laptop and many consumer electronic devices. This is a kit that comes with a FAA-TSO Approved Cigarette lighter power adapter and plug-in USB 5V converter. 12V AIRCRAFT: If your aircraft runs on 12V you will not need any extra equipment to operate 12V equipment with your Power Adpater, and it comes with a rubber cap marked as DC12V. 28V AIRCRAFT: Please note, the USB Plug is able to convert 28V input into 5V USB output without additional equipment. However, In order to power most 12 volt consumer electronic devices you will need a Converter to get 12V output. P/N 11-10394 .................$149.95
Simultaneously provides one primary power output and three lighting power outputs. Pitot/Static ports or optional electrical input provides ability to work in automatic mode without pilot intervention. Arms at beginning of flight. Activates instantly upon power loss. Recharges during flight. Turns off after flight. Utilizes sealed lead-acid cells for reliability and cold weather performance. Lighting outputs can power LED or incandescent lighting at 5, 14 or 28 VDC. Remote, mini-annunciation switch (with automatic dimming) controls test and manual operations. Quality Mil-Spec connectors included. Field replaceable battery module(s). Amp-hours of power at 18V: 2.5 Ah. Total system weight: 5.0 lbs. Designed and built in the USA. One year limited warranty. P/N 10-04770 ............$2,298.00 Morningstars superior series switching provides many advantages compared to shunt controllers. Series regulation reduces FET heating and lowers voltage stress on the power FETs. A series configuration also improves protection against lightning surges and reduces switching noise. The series design improves charging accuracy. In PWM, series switching becomes self-correcting for temperature and system voltage drops. P/N 11-04618 ................$70.50
Designed to ELIMINATE onboard ground loop noise problems in an easy to use module. Plugs in between your portable device and your aircrafts audio system. Was designed with a low frequency isolation audio transformers that isolates normal audio from unbalanced AC noise interference. Incorporates RCA, 2.5mm and 3.5mm connectors that ensures compatibility with numerous consumer devices currently used in modern aircraft. Easy Plug and Play Installation, Approval Types: Form 337, Portable Device 1 year Limited Warranty Ultra small footprint Custom configurations Portable device P/N 11-09493 ...........................$89.95
Lone Star Aviations new 12V STEP-UP Converter is the smallest (3 x5 x 2), most efficient (93-95%) and the most versatile STEP-UP aircraft converter in our industry today. RTCA/DO 160D tested to operate 28V NAC/COM radio equipment such as KX 155, KX 165, KY 196A, KY 196B, and Motorola VHF transceivers on 12V aircraft. Additional 28V electronic devices are HSI, cameras, audio panels, battery backup systems, etc. FAA Approved Under TSO-C71 Now Approved LS0305002B-MS Features: * Ultra-Small size 2.5 x 4.5 x 2.0 * 93-95% Efficiency rating * Light Weight 275 grams / 0.606 lbs * Optional Connector: MS 3102 Receptacle * Potentiometer for output adjustments * Universal Mounting * LED Status Indicators * Operating Temp: -55C to +70C * Circuit Protection: OV, UV, SC, SP, RP, OC * Regulation Load: +/- .5% * Ripple Input/Output: 20-25mVp-p * Transient response time .5 ms * Easy Installation * FAA TSO-C71 Approved (Pending) Step-up 14V DC to 28V DC Converter .......P/N 11-02888 .........$449.95 Step-down 24VDC to 12VDC Converter .....P/N 11-03309 .........$249.95 Connector Kit 5 Pin DB Style ......................P/N 11-06001 ...........$49.95
521
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Ameri-King AK-550 is a FAA TSOd approved Regulated DC to DC Power Booster Converter. It transforms an unregulated input from a 12 Vdc to a regulated +28 Vdc output to a bootstrap mode. It may be installed in a pressurized area, controlled or non-controlled temperature at altitudes up to 55,000 feet. Its locations include Electrical/ Avionic equipment rack, behind or beneath aircraft panel, or cabin pressure bulkhead. Installation is extremely simple. All necessary Accessories are provided, including mating MS connector plug and MS cable clamp. 11-00064 ............ $328.95 11-09316 ............ $595.00 11-01453 ............ $734.00 11-01454 ......... $1,392.00
AK-550-6C (6 amp) GA Applications ......P/N AK-550-6 (6 amp) ....................................P/N AK-550-12 (12 amp) ................................P/N AK-550-24 (24 amp) ................................P/N
AMERI-KING DC / DC CONVERTER
The Ameri-King AK551 is a FAA TSOd approved Regulated DC to DC Power Reducer Converter. It transforms an unregulated input from a 24Vdc battery to a regulated +13.8 Vdc output in a Reducer mode. Applications include critical communication navigation digital Equipment: AM/FM/CD receivers; it may be installed in pressurized or non pressurized area, controlled or noncontrolled temperature at altitude up to 55,000 feet. Its locations include Electrical/Avionic equipment rack, behind or beneath aircraft panel, or cabin pressure bulkhead. Mating connector plug is provided. AK-551-9 (9 amp) ..................P/N 11-00066 ............ $189.95 AK-551-18 (18 amp) ..............P/N 11-01455 ............ $316.95 Ak-551-40M (40 amp) ............P/N 11-01456 ............ $950.00
EXP TRAY EX-110- he EXP BUS mounting tray is the ultimate in quick build time savings. The tray comes Pre-punched, and pre-assembled with rocker switches prewired to the PC board. All the builder needs to do is to cut a single rectangular hole in the panel, connect the battery, alternator, and all of the load wires to the proper terminals on the EXP BUS2 PC board mounted in the chassis. 14V DC systems (not recommended for 28V aircraft). Replaces all but one circuit breaker in most homebuilt aircraft, and includes the master switch, master relay, and the avionics master switch. The avionics output bus provides six protected circuits, and automatically shuts off when the starter is engaged. Three master bus outputs operate items such as panel lights, gyros and engine instruments. Switched outputs include the alternator field, Beacon/ Strobe output, nav light output, aux fuel pump output, two landing light outputs, and two spares. All outputs are overload protected, eliminating the need for fuses or circuit breakers, and saving the labor of installing and wiring them up. P/N 11-00430 ............. $418.00 EXP 2V - he Expbus II is a lifesaver when wiring up your homebuilt project. The EXPBUS II is a complete electrical system on a special high current, printed circuit board. 14V DC systems EXP-2V (not recommended for 28V aircraft) For a small P/N 11-00431 additional charge, we can configure your board with any size (1 to 11 amps) breakers in any position. Size: 7.8 long by 3 deep by 1.9 tall. Weight 0.8 lbs. P/N 11-00431 ............. $299.00 IND 2 - Annunciators for each solid state breaker on the EXP BUS * Over and undervoltage warning lights * Ammeter display * Instrument light dimmer circuit * Single ribbon cable installation to EXP Bus IND-2 The Indicator module is an accessory for the EXP P/N 11-00432 BUS DC LOAD CENTER. This optional accessory provides several enhancements to the basic load center, all mounted in a small panel mount module, 4.6 inches long, and 2 inches wide. The module extends 2 inches in depth, behind the panel. The module provides an annunciator output for each fused output on the LOAD CENTER, which illuminates if the circuit is tripped. It also provides OVER and UNDER VOLTAGE annunciators, an AMP-METER indicator, and a light dimmer circuit for the instrument lights. P/N 11-00432 ............. $134.95 BRKT 2 - Mounting brackets to simplify mounting the PC board in the aircraft. Put things where you want them to be. Free Shipping on this item. P/N 11-00433 ............... $21.95 EXP 110 Tray unlit x/ Battery Back up . P/N 11-08430 ............. $469.95 An instrument panel mounted warning light which provides an indication of abnormal buss voltage. A flashing light indicates a buss voltage greater than 15.5VDC. A steady light indicates a buss voltage below 12.5 volts DC. The weight of the device is 4.5 oz. and operating voltage is 9 to 20 volts DC. Operating current exclusive of lamp load is 0.1 amps. Lamp load: .02 amps maximum. P/N 07-06830...................... $89.75 Advanced regulator/rectifier circuit provides steady 13.8 volt output regardless of load. Maximum output 220 watts, 16 amps. 10v signal pulse output for digital or MaxPac tachs. Accepts AC input from 15 to 100 volts. Can be used with AC strobe. Features: * Extremely clean filtered DC output * Electronics designed to deliver 16 amps producing 220 watts * Efficiency: No consumer or dummy load required for proper operation * A beautiful and rugged lightweight package weighs just 16 ounces and is 3.5 x 2.5 x 1 inch * Protection from the environment: complete epoxy encapsulation to insure all-season operation * Ease of installation: crimp type ring terminals and wiring schematics provided with every unit P/N 11-03168 ...........$57.75 Powers radios, intercoms, music players, and all digital gear Eliminates all the electrical noise from your system Provides fully-regulated power at your choice of voltage (adjustable) Protects gear from all forms of power spikes, noise and over-voltage Prevents in-flight problems including flaky operation and failures Replaces most outboard power adaptors from other manufacturers May be used in multi-unit installations Specs: Voltage out - 9.6-15.3V (adjustable, regulated within 1%) Voltage in - 12-16V Current out - 1.0A continuous, 3.0A intermittent Size - 3.6 x 2.6 x 1.1 inches Weight - 4.4 oz *Note: Smoothie is a sophisticated noise filter and secondary voltage regulator - it does not replace the primary regulator used to power mechanical systems and charge the aircraft battery. P/N 11-05792 ..............$148.50
Prices Subject to Change Without Notice
11-04330
DC-DC Converter, Device to reduce voltage from 28V to 12V. Allowing the user to operate 12V items in a 28/24V airplane. The device is fully electronic, no passive elements generating heat. It is fully protected and fused. A green LED indicates normal and abnormal conditions (overload). The unit is enclosed in a small precision machined aluminum box with integrated heatsink. Input is via a fused lighter plug and output is via a female light receptacle. Size: 1.3x 1.3x 2.3; Weight: approx. 5.0 oz. .......3 AMP.28-12V DC-DC Converter ............................................ P/N 11-04330 ...... $41.50 10 AMP.28-12V DC-DC Converter ...... P/N 11-04331 ...... $89.75 Y-COUPLER Heavy duty device that allows user to split the output of their cigarette lighter outlet in their airplane or to be used in conjunction with one of the above Cockpit Voltage Converters (running multiple items of one converter). This device is fuse protected (6.0A) 02YC Y-Coupler ................................... P/N 11-00401 ...... $11.75 INVERTER A device to produce Alternating Current out of a Direct Current Source. This device will generate 110V AC from a 28/24V DC Source (load limit is 150W continuous, 200W peak). Plug it in to your airplane lighter receptacle and have a household 110V AC outlet. This device is fuse and electronically protected against overload, over temperature, over and under voltage. Dims: 1.77x 2.87x 6.06; Wt: 12.77 oz. 110I 28-110V Inverter .......................... P/N 11-00402 ...... $86.75
522
Two axis relay deck to be used for both elevator and aileron servos. P/N 11-10512 ....................$79.00
RELAY DECK
CM WP ME HA AP LG EP
The Volt USB adaptor conveniently charges USB electronics through your cars 12-volt outlet (cigarette lighter). Features include a red LED charge indicator on charger top and spring loaded tip. Spring loaded tip fits most outlets. Note: Colors are assorted. Color possibilities include Orange, Black, Fuscia, Green, Red, Blue, Red, or White. Specifications: Power conversion: 12V Automobile Charger to USB. 5.0v output. Size: 2.2 x 1. Weight: .6 oz. CE certified P/N 11-10518 ......................$8.95
The Jolt / Volt USB Combo pack includes the Jolt Rechargeable USB Mini Light and the Volt 12V USB Charger/Adaptor. Jolt USB Mini Light: Recharges in any USB output device such as PCs or USB Car adaptors. Glows red when charging. Glows green when fully charged. Rubberized, soft grip case. Steady on and flashing modes. Color: Black Volt 12V USB Charger/Adaptor: 5.0v output. Red LED charge indicator on charger top Conveniently charges USB electronics through your cars 12-volt outlet (cigarette lighter). Spring loaded tip fits most outlets. Size HxD: 2.2x 1. Weighs just .6 oz.. CE certified. Color: Black. P/N 11-10517 ....................$17.95 Wired with 22 gauge wiring. 7/16 stainless steel shaft with custom machine bushings to fit any diameter shaft. Comfortable grip. Made with lightweight glass-filled Wellman nylon. Rotates easily to any position. Made in the USA. For use in Experimental Aircraft Only. Model Functions Part No.. Price
CS IN EL AV TO PS BV
LVC 2088 should be used with every Rotax Model 914 aircraft engine to help insure that electrical power is available to power the engine fuel pump under all conditions. Isolates the internal engine alternator from the aircraft electrical system if a low voltage condition develops in the electrical system. This helps insure that the fuel pump continues to operate. The Rotax Model 914 aircraft engine requires an electrically powered fuel pump for operation. The 2088 LVC satisfies the 2 independent power source requirements for the fuel pumps shown in the Rotax Model 914 installation manual. If a low voltage condition develops in the electrical system for any reason, the LVC instantly and automatically disconnects the output of the internal alternator from the electrical buss to assure power is available for the fuel pump. If the low voltage condition is corrected, the LVC will automatically reconnect the alternator. 2088 LVC is enclosed in a water resistant metal box. It should be mounted close to the engine using the tabs on the box.. The unit provides a convenient location for attaching the required 22000uf capacitor, the wiring to the regulator C terminal and one of the electrical fuel pumps. The fuel pump wiring is internally fused, so no external fuse is required. An output for an optional warning light is provided. P/N 11-10501 ..................$194.95
Two function control stick Index trigger button 11-10508 Additional button underneath trigger Ambidextrous design CS-2 Four function control stick Two trigger buttons Two face buttons Ambidextrous design CS-4 Eight function control stick Four-way hat switch Trigger button and index button Ambidextrous design CS-6 Eight function control stick Four-way hat switch Two face buttons Trigger button and index button Ambidextrous design CS-8
$99.00
11-10509
$119.00
11-10510
$129.00
11-10511
$139.00
523
STICK GRIPS
INFINITY MILITARY STICK GRIPS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Infinity Aerospace designed these grips with safety, comfort, functionality, durability and aesthetics in mind. The ergonomic design is contoured to the shape of your fingers and includes a fatigue reducing hand rest at the base. The non-glare matte black finish is abrasion and impact resistant for long life, yet easily removable, maintainable & repairable. Matching customized right & left hand models available. All the major cockP/N 11-00031 pit functions can be at your finger tips. Thousands have already been installed in over 50 models of aircraft. Features: 6 long fits stick ODs from 5/8 to 1-1/4 Includes 3 ft of shielded cable w/17 conductors. Color coded pre-wiring & installation schematic Made from lightweight high impact, durable high temp. tolerant flame retardant & flash resistant injected ABS material Wt: 12 oz. Easy removal for maintenance, customizing or repair. Description Military Stick Grip A/C with Flap/Brake (Right) Military Stick Grip A/C with Flap/Brake (Left) Military Stick Grip A/C without Flap/Brake (R) Military Stick Grip A/C without Flap/Brake (L) Military Stick Grip with Spoilers (Right) Military Stick Grip with Spoilers (Left) Replacement Switches for extra customizing: Momentary push-button switch ON/OFF (8636) SPDT push-button Toggle [spring loaded-to-center ON/OFF/ON] 11-00218 $11.75 11-00219 $11.75 11-00220 $11.75 Part No. Price
11-00031 $174.00 11-00032 $174.00 11-00033 $175.95 11-00034 $175.95 11-00036 $175.95 11-00667 $175.95
Ray Allen Company G1 and G2 series stick grips use modern, flush fitting push-button switches to control one or two axis electric trim. When one grip is used, these switches can be wired directly to RAC trim servos. This G101 G207 G301 eliminates the need to wire G205 relays in your trim system. However, if two grips are used, you will need either relays or a switch to transfer the control of trims from one grip to the other. The grip itself is made of semi-soft UV and oil resistant foam. The upper switch housing is made of nylon with a lightly textured finish. The G101 grip (4.75 height) features a momentary contact switch on top that can be used as a PTT button. (Old MAC Model G1) P/N 11-09930 .......... $36.95 The G205 grip (5.25 height) has 5 functions which include a PTT and a 4 SPDT,momentary contact switches. These switches are rated at 5 amps and can be used for other purposes. (Old MAC Model G5) P/N 11-09920 ........ $109.85 The G207 grip (5.4height) has to additional momentary contact pushbutton switches mounted on top that can be used for controlling functions on avionics, auto-pilot, etc. (Old MAC Model G7) P/N 11-09925 ........ $148.95 The G301 stick grip feature four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way hat type activator. 6.5 (165 mm) tall. P/N 11-08644 .......... $64.50 The G303 stick grip has two trim switches, a faceplate slotted vertically for 1-axis trim and a PTT switch. P/N 11-02538 ........ $114.50 The G305 stick grip has 4 trim switches, a faceplate slotted vertically and horizontall for 2-axis trim and PTT switch. P/N 11-02539 ........ $139.75 The G307 stick grip has 4 trim switches, a faceplate slotted vertically and horizontall for 2-axis trim and PTT switch. P/N 11-02540 ........ $157.75 Ray Allen stick grips are designed to fit any stick size up to 1 in diameter with the use of spacers. Two nylon spacer are included with each grip enabling easy installation on 3/4, 7/8 and 1 sticks. All Ray Allen grips come as a complete kit and include pre-cut and stripped, Teflon insulated wire. A die-cut label sheet is also supplied in the G205 and G207 grips The control stick grips from Flight Grip are modular in design to allow maximum flexibility when specifying switches to control the various electrical items on your aircraft and for ease of installation and assembly. Two off-the-shelf configurations are listed below. The Model #2 grip provides for control of two functions using the #4 #2 rocker trigger switch. The trigger switch features momentary contact either side of center, with spring return to center OFF action. The Model #4 grip is the same as the Model #2, but adds two push-button switches for thumb activation in the top cap of the grip. The switch mounted closest to the thumb rest is a latching type (push on push off), and the remaining switch is a momentary type. Left hand grips are available with all the same switch options. Grips are designed to fit 1-1/8 OD control sticks and adapter bushings are available to adapt to 1, 7/8 and OD control sticks. #2 (Right Hand-2 Functions) .............. P/N 11-02000 ................. $126.95 #4 (Right Hand-4 Functions) .............. P/N 11-02050 ................. $149.95 #2L (Left Hand-2 Functions) .............. P/N 11-06753 ................. $118.95 #4L (Left Hand-4 Functions) .............. P/N 11-06754 ................. $164.95 Adapter Bushing 1............................. P/N 11-06755 ................... $17.50 Adapter Bushing 7/8.......................... P/N 11-06756 ................... $18.65 Adapter Bushing 3/4.......................... P/N 11-06757 ................... $18.65 These homebuilt control grips are made of high-strength urethane plastic, finish painted in matte black and come complete with all necessary hardware (AN screw, nut, washers). Available unbored or bored to accept 7/8, 1, or 1-1/8 diameter tubing. Grip Bore Part No. Price Right Unbored 11-01010 $71.50 Right 7/8 Bore 11-01015 $72.25 Right 1 Bore 11-01020 $71.50 Right 1-1/8 Bore 11-01025 $71.50 Left Unbored 11-01010-L $63.25 Left 7/8 Bore 11-01015-L $71.65 Left 1 Bore 11-01020-L $69.50 Left 1-1/8 Bore 11-01025-L $63.25 11-02010 $72.00 All of these grips (except Neutral Unbored unbored) are available w/PTT Neutral 7/8 Bore 11-02015 $71.85 Switch at $74.50 Add -1 to Neutral 1 Bore 11-02016 $72.00 end of part number for PTT. Neutral 1-1/8 Bore 11-02017 $71.50
FLIGHT GRIPS
Toggle [ON/Center OFF/Momentary ONON/OFF/ON] 11-00221 $9.95 Spacers/Adapters: 1 OD x 3/4 ID (i.e.-for Lancairs & canard tubes) 11-00222 $22.85
1 OD x 7/8 ID (i.e.-for Glasairs & RV co-pilot tubes) 11-00223 $16.90 Infinity Switch with China Hat (Right) 11-04757 $17.80
Teak wood is beautiful and absorbs sweat, preventing any sticky slime build-up. The grips come in standard, master and ultra styles in left & right hand. The standard grip comes with a push button on top with special dust-proof cover. Normally used for a push-to-talk button, open switch and good for 250,000 cycles min. The master grip has a larger head to accommodate a 4-way trim switch & pushto-talk button. The trim switch is the same one used with the M.A.C. systems. The ultra grip has a larger surface to accommodate the 4-way trim and autopilot and/or air brake with the push-to-talk located near the tip of the index finger. The ultra can handle a total of four switches, when using the air brake, in its head. Configurations can also be custom designed. All grips come with buttons and 3/4 or 1 standard bore. Larger bores available.
Rubberized urethane with granular like non-slip surface. 7/8 I.D. Stick Grip................. P/N 11-00100 ......... $12.95 ea 1 I.D. Stick Grip.................... P/N 11-00101 ......... $12.95 ea 1-1/8 I.D. Stick Grip ............. P/N 11-00102 ......... $12.95 ea
524
RAC INDICATORS/SENSORS/ACCESSORIES
designed to be installed in the cockpit and give an indication of the servo output shaft position. The ten LEDs are the brightest available for superior visibility in sunlight, but can be dimmed for night flight. It can be installed horizontally or vertically. 3 wires as small as 28 gage connect the indicator directly to a Ray Allen servo (or a position sensor). The face plate measures 1.75 x 0.75x 1.1deep. The RP3 is the standard position indicator included in R.A. trim systems. Labels are not included. See labels below. P/N 11-02020 ......................$96.75 GWL-1 GEAR WARNING LIGHTS This 6 light indicator is designed to be installed in the cockpit and give an indication of the landing gear position. The lights are high intensity LEDs and are inset to probide maximum visibility in bright sunny conditions. The top lights are yellow and the bottom are green. Six 26-gage wires connect the lights directly to the gear safe/unsafe switches (not included). The faceplate measures 1.35x 1.75 x 1.5deep. Gear warning lights come with labels pre-installed. P/N 11-01575...........$105.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
POSITION INDICATOR/ROCKER SWITCH LABELS Finish off your panel with these high quality labels. Rocker switches and needle indicators require a LARGE label, LED indicators use a SMALL label. Elev 1 shows trim down at top of label. Rudder - Large ...........................................P/N 11-01819 ............ $0.55 Rudder - Small ...........................................P/N 11-01820 ............ $0.55 Aileron - Large............................................P/N 11-01816 ............ $0.55 Aileron - Small ............................................P/N 11-01815 ............ $0.65 Elev 1 - Large .............................................P/N 11-01822 ............ $0.55 Elev 1 - Small .............................................P/N 11-01821 ............ $0.55 Wing Flap - Large.......................................P/N 11-01818 ............ $0.55 Wing Flap - Small .......................................P/N 11-01817 ............ $0.55 Cowl Flap - Large .......................................P/N 11-01576 ............ $0.55 Cowl Flap - Small .......................................P/N 11-01814 ............ $0.55 POS-12 POSITION SENSOR When combined with a Ray Allen indicator, this sensor can be used to measure the position of wing flaps, cowl flaps, or many other mechanisms.Small enough to be installed anywhere, size: 2.7l x 0.8w x 0.5h. (note: T2 & T3 servos have their own built-in sensors) 1.2 travel. P/N 11-01321 ...........$36.50 POS-5 POSITION SENSOR - Same as POS-12 Sensor. Measuring only 2.7(69 mm) x .5(13 mm) x .8(20 mm) , its small enough to be installed almost anywhere. 5(13 mm) travel. P/N 11-08092 ...........$37.90 REL-2 SERVO RELAY DECK This device converts the momentary contact action of the ROS-4 4-way switch, or any SPST pushbutton switch, into a DPDT action that is necessary to operate Ray Allen servos. You will need one of these relay decks for each servo in your installation. Measures 1.6 (40 mm) x 1.8 (49 mm) x 1.1 (28 mm). P/N 11-05312 ...........$47.60 SPD-1 SERVO SPEED CONTROL Enables you to slow the speed of your trim servo to suit your individual installation. Size: 2x 0.5x 0.8. P/N 11-02078 ...........$48.85 REG-1 12V REGULATOR Enable you to operate servos and indicators in aircraft having 28V electrical systems. Converts all input voltages up to 35V to 12V. Capable of supplying 1 amp of current allowing you to operate 2 trim systems simultaneously. Size: 2x 0.5x 0.8. P/N 11-02036 ...........$48.25 RAY ALLEN BEZEL ONLY WITH HARDWARE- -They make an excellent addition to any instrument panel. The bezel was designed to integrate a professional appearing label near the switch.The bezel measures 1.25 (32 mm) x 1.35 (34 mm). P/N 11-08642 .......... $11.95 RC8-7 CLEVIS/PUSHROD KIT RC8-7 Clevis/Pushrod Kit - 11-02040. Contains two 8/32 threaded clevis forks, one 7 stainless steel pushrod and clevis pin hardware. NOTE: This clevis and pushrod kit is not compatible with Ray Allen POS series position sensors. RC8-7 Kit ...........................P/N 11-02040 .......... $27.95 T4 Pushrod Kit...................P/N 11-02042 .......... $15.35
T2-10A
*T2-7A = exact replacement for MAC 4A servo.*T2-10A = exact replacement for MAC 6A servo. *T3-12A = exact replacement for MAC 8A servo. *T4-5 is exact replacement for the Mac S9 servo.
Operating Voltage .....................12-14 VDC No Load Current ...............................75 ma Weight ................................... 2.5 oz. (71 g) Max Thrust ........................30 lbs. (13.5 kg) Output Shaft Movement .......... 0.5 (13mm) Output Travel Time .................. 15 seconds Length ................................... 2.25 (57mm) Width ..................................... 2.25 (57mm) Height.................................... 0.77 (20mm) Output Shaft Movement Travel Time 0.7 in. 10 sec. 1.0 in. 16 sec. 1.2 in. 19 sec. 0.5 in. 15 sec. Price ea. $298.00 $298.00 $319.95 $298.95 Price ea. $154.75 $158.50 $178.50 $264.50
SERVOS ONLY
Output Shaft Movement Travel Time 0.7 in. 10 sec. 1.0 in. 16 sec. 1.2 in. 19 sec. 0.5 in. 15 sec.
*T2-7A = exact replacement for MAC 4A servo. *T3-12A = exact replacement for MAC 8A servo.
*T2-10A = exact replacement for MAC 6A servo. *T4-5 is exact replacement for the Mac S9 servo.
RS2 ROCKER SWITCH - Very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting & allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75 (44mm) x 1.0 (25mm) x 1.47 (37mm) deep. Included with trim systems or can be purchase separately. P/N 11-02035 ................$27.95 ROS-4 FOUR-WAY SWITCH - This compact multi-action switch can be installed inside your control stick grip to activate both elevator and aileron trims. ROS-4 has a SPST action so it must be used in conjunction with a relay deck to operate Ray Allen servos. Rated at 1 amp. P/N 11-02075 .................... $79.50 Rans Elevator Trim System features a trim tab actuated by a push-pull wire. By turning the trim wheel, the wire moves the trim tab. The system has the look and feel of a standard aircraft trim wheel. The trim tab is constructed of sheet aluminum and can be adapted to the trailing edge of many homebuilts and ultralights. The trim tab is sized for both low & high speed aircraft and since it is mechanical, requires no battery or power source other than the pilots hands. Trim Sys. less Tab (no panel or flap lever mount) ..P/N 11-09955 ...$249.95 Trim Sys. with Lower Panel...............................P/N 11-09960 ...$293.95 Trim Sys. Flap Mount ........................................P/N 11-09965 ...$282.95 Trim Sys. without Wheel ...................................P/N 11-09970 ...$102.95
RAC SWITCHES
10/32 THREADS CLEVIS WITH HARDWARE - Contains 10/32 threaded clevis forks, stainless steel pushrod and clevis pin hardware. Included with Ray Allen trim systems, or can be purchased separately. Note: This clevis and pushrod kit is not compatible with Ray Allen POS series position sensors. P/N 11-08643 .......... $12.90 WC2 5-WIRE TEFLON INSTALLATION CABLE This durable, flexible wire cable is highly recommended for Ray Allen installations. 5 separate color coded, 26-gage, 19-strand, silver-plated, FEP Teflon insulated wires inside a tough, all Teflon sheathing. 20 ft. roll.............................P/N 11-01577 .......... $27.75 25 ft. roll.............................P/N 11-01578 .......... $34.50 50 ft. roll.............................P/N 11-01579 .......... $68.35
525
These Trim Relay Boards allow control of an aircrafts trim motors from the typical switches found in most stick grips. As the switches in the grips are too small to handle the motor loads and usually do not have the required number of poles, the TRB offers a simple, elegant solution that is easy to wire and understand. The boards have a per axis rating of 10A at 12 volts, (24V units are also available). 4.00L x 2.50W x 1.00H. P/N 11-09849 ....................................$49.95
3 Axis trim relay and buffer board has been designed to allow easy control of trim motors from small grip mounted or remote switches. Three Axis control is possible with each of the circuits being configured in a double throw format. Off circuit conditions apply ground to both motor wires providing an effective braking actions. Board will work with single or winding DC motors. Other remote controls are possible such as auto pilot disconnect or recognition lights and more. Relays are continuous DC rated at 10 Amps. Dimensions are 5.6L x 4W x 1.0H P/N 11-02043 ..................................$134.95
Description 12V DC 24V DC 12V DC 24V DC 12V DC W/ Relay 24V DC W/ Relay 24V DC W/ Relay
Used with Ignition System S-200, S-600, S-700 S-200, S-600, S-700 S-1200 S-1200 S-200, S-600, S-700 S-200, S-600, S-700 S-1200
TRIM SWITCHES
TRIM SWITCH CA3112 - The CA3112 is identical to the S-Tec 3112 switch but precision machined from aircraft aluminum and will not crack or break like the OEM version. P/N 11-07354..............$279.50
This 6 light indicator is designed to be installed in the cockpit and give an indication of the landing gear position. The lights are high intensity LED's and are inset to provide maximum visibility in bright sunny conditions. The three top lights are YELLOW and the three bottom lights are GREEN. Six wires as small as 26 gage connect the lights directly to the gear safe/unsafe switches (not included). The faceplate measures 1.35(34 mm) X 1.75"(45 mm) and it is 1.5(38 mm) in depth. Ray Allen gear warning lights come with label pre-installed. GWL-1 PN 11-01575 This indicator is also available with BLUE top lights for SEAPLANE useage. GWL-1B PN 11-07963 Description Gear Warning Lights GWL-1 Gear Warning Lights GWL-1B Part No. 11-01575 11-07963 Price $105.95 $165.00
TRIM SWITCH CA100-1 - The CA100-1 switch is used on a certified aircraft. It uses MIL-SPEC switches (SPST) and precision machined from aircraft aluminum and will not crack or break like cheap plastic switches. It has a nice tactile click action. P/N 11-07355..............$359.00
The Two Place Trim Mixer is solid-state equipment designed to replace the traditional mechanical relays earlier used for two pilots to operate the aircrafts trim system while adding the advantages of logic functions found in electronic equipment. The mixer incorporates MOSFET (Metal Oxide Silicon Field Effect Transistor) transistors for switching the high current with no moving parts and no electrical arc to prevent fuel fumes ignition. The trim system is formed of the following elements: A mixer unit and the following which should be provided by the user: -Two Chinese Hat switches on both front and rear sticks (or left and right sticks). -Two DC trim motors (such as the MAC Servo with or without connections to position indicator) -Harnesses -An SPST switch (option). P/N 11-02876 ...............................................$193.00
526
TCW TECHNOLOGIES
An electronic control module that controls the operation of the engine starter system. Improves the safety and security of push-button or key-switch starting systems by providing an interlocked and time limited operation of the engine starter. SmartStart controls standard aviation starter contactors and provides simple integration of control stick switch or panel mounted start switches. SmartStart includes inputs for interlock and arming switches and provides a 1 minute timer for activating the starter contactor and includes an armed LED that indicates when the engine may be started. Helps avoid unintentional activation of the engine starting system. Available with an optional airspeed switch that ensures in flight restarting of the engine may be accomplished at anytime without the need to press the arming button. Hidden arming switch provides improved anti-theft protection. Door/canopy interlock provides improved safety. Compatible with standard keyed mag/starter switch.
Description Smartstart Module SmartStart Module Kit - Includes: module, wiring harness, and airspeed switch Accessories Description Smartstart Wiring Harness Airspeed Switch 40 Knot for 2 speed function Part No. 11-08499 11-08502 Part No. 11-08501 11-08665 Price $67.50 $148.50 Price $40.50 $44.10
SMARTSTART MODULE
Provides aircraft bus voltage surge and sag protection for the connected electrical equipment. The IPS system allows electronic equipment such as engine monitors, EFIS and GPSs to be operational before and during engine starting. Used with aircraft engine monitors it ensures the pilot can monitor critical engine operating parameters such as oil pressure during the engine starting process. Ensures the connected electronic equipment is provided with a stabilized source of power even when the aircraft battery voltage drops significantly. Additionally provides surge protection by actively clamping the regulated output voltage. Features a panel mounted low voltage warning light which may be used to provide a pilot warning when the aircraft bus voltage falls below 12 volts. 4 amp ..................... P/N 11-08495 ................$265.50 8 amp ..................... P/N 11-08496 ................$328.50
Combines a Ni-mh battery pack, a charger and switching logic in one convenient package. An engineered solution to enable an endurance bus for critical loads found in aircraft. It simplifies the wiring and installation of a source of back-up power by integrating all of the key elements into a single enclosure. Provides back-up power to electronic loads such as EFIS, GPS, Autopilots, and engine monitor systems. Nickel metal-hydride battery pack and a matched charging system to ensure the battery is properly charged and maintained. Includes switching circuitry to provide a stable source of output power during normal and emergency operations. Provides signals to other equipment such as EFIS systems to communicate the operating state of the back-up bus as well as the state of the battery. Connects to the standard aircraft power bus and provides an output to critical equipment that requires back-up power. Additionally, the IBBS system provides surge and sag protection for connected equipment, allowing operation of critical equipment during engine starting. Specifications: Input Voltage: 10-15 volts DC Input Current: 9.75 amps max continuous Output Voltage: 10-12 volts DC during back-up operation Output Current: 6 amps continuous, 9 amp peak for radio transmissions Battery:Internal sealed Ni-mh Charger: Integral high performance fast charger Surge Protection: 16 volt active clamp, 1500w 10/1000uS waveform Wiring: CPC connector with Mil-spec machined connections Enclosure: Cast aluminum,4.74 x 3.13 x 2.17 Weight: 2.5 lbs Temperature range: Operating -10 C to 60 C, charging 0 C to 40 C
Description TCW IBBS Accessories TCW IBBS Wiring Harness with CPC Connector TCW IBBS mating CPC connector for field wiring. TCW IBBS Charger Part No. 11-08503 Part No. 11-08504 11-08505 11-09444 Price $337.50 Price $76.50 $15.30 $94.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Intelligent Power Stabilizer, IPS, is an electronic power converter for critical electrical equipment found in general aviation aircraft. The IPS system provides aircraft bus voltage surge and sag protection for the connected electrical equipment. The IPS system will operate over an input voltage range from 10 volts to 30 volts and provides a regulated output voltage of 24 volts. The IPS system allows electronic equipment such as engine monitors, EFIS and GPSs and radios to be operational before and during engine starting. This important feature allows the pilot to load flight plan data into the aircraft GPS prior to starting the engine, thereby saving fuel and operating expense. When used with aircraft engine monitors it ensures the pilot can monitor critical engine operating parameters such as oil pressure during the engine starting process. P/N 11-09712 .................$292.50 Designed specifically to operate the lighting circuits used in homebuilt aircraft. Provides control of up to 4 lighting circuits plus dimmable control of up to 3 channels of instrument and cabin lights. The 4 lighting circuits may be used to control landing lights, taxi lights, strobe lights and navigation lights. Each channel is independently powered and controlled. Provides a wigwag function between two of the lighting circuits. Each dimmable channel may include incandescent or LED lighting up to 1 amp. Specifications: Input Voltage: 10-30 volts DC Output Voltage: 4- Switched circuit rated at 10 amps each, 3 - Dimmed circuits rated 1 amp each Dimmers: True DC:DC converter with full power filtering and regulated 2-12 volt outputs Inputs: All switch inputs are low current closures to +voltage Wig-Wag: 150 cycles/minute between channel 1&2; 1 minute warm-up time Wiring: Standard 15-pin D-sub connector (male on controller) for connection to switching panel. Enclosure: Overall dimensions 4.7" x 3.7" x 1.2"; Cast aluminum Weight: 1.0 lb P/N 11-08497 .................$346.50 Universal switch airspeed kit (USW-1) includes an ASW-1 airspeed switch and a Universal SwitchSPDT controller. This combination of components allows for the switching of electrical loads up to 10 amps and up to 30 volts based on aircraft speed. The airspeed set point is factory calibrated to 100 knots, however, it may be field adjusted to switch at any speed between 55 and140 knots. Provides both a normally open and a normally closed contact for controlling any electrical load up to 10 amps. The system works with aircraft power systems from 10-30 volts. P/N 11-08498 ....................$85.50
An electronic speed control system for standard electric trim servos found on many homebuilt aircraft. It replaces other speed controllers and relay modules with an electronic solution that resolves issues such as run-away trim and failure to operate conditions. Features: Electronic servo controller with speed control run-away protection Time limited operation prevents trim servo run-away conditions Servo travel limited to 3 seconds per trim switch actuation Reverse function switch allows pilot to recover from a stuck or failed trim switch Eliminates many other components, no extra relay decks or speed controllers needed Very simple wiring, no extra parts needed for pilot and co-pilot trim switches Designed for standard electric trim servos, such as the Ray Allen T2 & T3 series Short circuit proof, reverse polarity protected 1 axis, 2 axis models available For Experimental aircraft only NOT TSO'd Made in USA -- patented Specifications: Input voltage: 10-30 volts DC Output voltage: User adjustable 6-12 volts DC 1 amp maximum Inputs: Trim switch inputs, closure to ground pilot/co-pilot switches wired in parallel 2 speed switch, closure to ground output: Time limited, controlled DC voltage to servo Time limit factory set to 3 seconds Wiring: Standard 15-pin D-sub connector (male on controller) pre-made wiring harness with ON/OFF/Reverse switch available Enclosure: Overall dimensions 5.7" x 2.5" x 1.5" Weight: 6oz.
Description Safety-Trim Single Axis Servo Controller Safety-Trim Single Axis, 2 Speed Servo Controller Safety-Trim Dual Axis Servo Controller Safety-Trim Dual Axis, 2 Speed Servo Controller Accessories Description Safety-trim 8 ft wiring harness for single axis controller Safety-trim 8 ft wiring harness for dual axis controller Airspeed Switch 100 Knot for triggering 2 speed function Part No. 11-08506 11-08529 11-08530 11-08531 Part No. 11-08532 11-08533 11-08534 Price $166.50 $220.50 $256.50 $310.50 Price $58.50 $76.50 $44.10
Designed specifically to operate DC motor actuators, particularly the Vans Aircraft series of Flap Actuators used in RV type homebuilt aircraft. Connects to the standard up-off-(down) switches commonly used to control flap operation and directly drives a Vans flap actuator. Vfe protection by sensing airspeed and preventing flap deployment above a set airspeed. Allows for Pilot and Co-pilot flap switches and resolves the possible conflicts if the switches are operated in opposite directions. Requires NO sensor and is fully compatible with Safety-Trim servo controllers. Specifications: Input voltage: 10-30 volts DC, reverse polarity protected Output voltage: Overload protected, 2 amp continuous, 5 amp peak Inputs: Flap switch inputs are closures to ground Pilot and Co-pilot switches separately wire to IFC controller Air speed switch is a closure to ground Output: Time limited flap up voltage limited to 15 seconds Wiring: Standar 15-pin Dsub connector (male on controller) pre-made wiring harness available Enclosure: Overall dimenions: 5.7" x 2.5 x 1.5" Weight: 4oz
Description Flap Control Flap Control Harness Airspeed Switch 100 Knot for triggering 2 speed function Part No. Price 11-08493 $202.50 11-08494 $58.50 11-08534 $44.10
527
CM WP
MFG BY ACS PRODUCTS CO. 11-03169 These fine quality switches are being used in many production aircraft such as Cessna, Schweizer, Ayers and Air Tractor. They provide on and off electrical control of both magnetos on single engine aircraft. The key-operated switches mount from rear of panel in 7/8 dia. hole. Available with or without starter position. Made in the U.S.A. A-510-5 Without Starter Position., Supplied with switch plate and two keys. (diode not required) ........ P/N 11-03169..... $104.95 A-510-2 With Starter Position., Supplied with switch plate two keys. (diode included) ........................... P/N 11-03170..... $124.50
11-03170 MODEL NO. A-510-5K, Includes ignition switch without starter position, two aircraft locks (one door and one baggage lock)* and two keys mated to ignition switch and locks. (Diode not required) .......................................................... P/N 11-03171..... $128.95 MODEL NO. A-510-2K, Includes ignition switch with starter position, two aircraft locks (one door and one baggage lock)* two keys mated to ignition switch and locks . (diode included)............................................................................... P/N 11-03172..... $148.85 * Baggage lock may be modified to second door lock if preferred.
ME
Part No. 11-03668
HA AP LG EP CS IN EL AV TO PS BV
Plate without start - A-2255-A1 .................... P/N 11-03668 ......................... $1.75 Plate With start - A-2255-A .......................... P/N 11-03667 ......................... $1.75
The door and baggage locks furnished with the ignition switches above are also available separately. Set of two locks (one door and one baggage lock) furnished with one key mated to both locks. The baggage lock may be used as second door lock if preferred. ............................................................................................................. P/N 11-01600 ................................................ $39.50 Universal Blank Key (uncut) for ACS door and Baggage Lock ..................... P/N 11-03175 ................................................... $3.95 ACS Double Sided Blank Key uncut with black cap ...................................... P/N 05-03666 ................................................... $5.50
MODEL NO. 10-357290-1, Without Starter Position. Includes two keys. Furnished with Switch Plate ................................$278.95 MODEL NO. 10-357200-1, With Starter Position. Includes two keys. Furnished with Switch Plate ................................... $333.95 MODEL NO. 10-357210-1, With push to start feature. Includes two keys. Furnished with Switch Plate............................ $399.75 ACS IGNITION SWITCH DEALER DISCOUNTS: 6-10 LESS 5%, 11-19 LESS 10%, 20-99 LESS 15%, 100+ LESS 20% (ASSORTED)
This is required for all new A-510-2 and A-5102K ignition switches for compliance with ACS Service Bulletin SB92-01. Diode Assembly for Starter Solenoid with one or Two Coil Contacts P/N 16050-2 ...................................... $7.80
BENDIX SWITCH PLATES Without Starter Position ................................................ Switch Plate No. 10-51127 .......................... $3.85 With Starter Position ..................................................... Switch Plate No .10-126676 ........................ $4.60
The Electronic Ignition Commander provides information and control solutions for experimental aircraft powered by Lycoming and Continental aircraft engines WHICH UTILIZE THE P-MAG ELECTRONIC IGNITION. Two different displays offered (2 1/4" Standard Instrument Display or Rectangular EFIS Display). Features: Continuous verification of timing mark synchronization and a Preflight screen that reports the timing syn chronization and condition of the ignition harnesses and spark plugs. Monitor E/P-mag operation. Three user definable timing map shifts in addition to the default A & B curves. Useful for running at high altitudes, auto fuel, or when it is desirable to use a different than standard timing curve. Dimmable screen for night flight. Sunlight readable Organic LED display with no viewing angle restrictions. Configurable tachometer with Hobbs meter function. Pilot adjustable RED line with multiple YELLOW RPM Ranges. Configurable LED warning light when running in YELLOW restricted ranges. Standard tachometer display with optional Manifold Pressure. Remote update capability allows you to update you EICommander from any computer. 2-1/4 Standard Instrument .........................P/N 11-10041 ....................................$600.00 Rectangular EFIS ........................................P/N 11-10042 ....................................$700.00
528
CIRCUIT BREAKERS
Klixon 7270 series circuit breakers were designed to utilize less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. Inherently resistant to shock and vibration, the Klixon disc element is capable of calibration within close tolerances throughout the service life of the breaker. Features: Tripfree operation, Snapacting thermal element, Small size, Light weight, MIL-C-5809 qualified, High interrupting capacity, Typical use: Aircraft and ground support equipment. Specifications: Vibration: 10G minimum, 50500 Hz (other vibration levels available). Mechanical Shock: 30G. Acceleration: 10G. Weight: 39 grams maximum (7270-1 and 7271-8). Interrupt Current: 4,000 amps at 30 VDC;3,500 amps at 120 VAC, 400 Hz. Endurance: 5,000 cycles: 120 VAC. 400 Hz, inductive;5,000 cycles: 120 VAC 400 Hz, resistive;5,000 cycles: 30 VDC, inductive;2,500 cycles: 30 VDC, resistive;5,000 cycles: Mechanical, no load. Description Current Rating Part No. Price 7270-5-3 3 amps 11-08344 $213.95 7270-5-5 5 amps 11-08345 $164.95 7270-5-7.5 7.5 amps 11-08346 $164.95 7270-5-10 10 amps 11-08347 $164.95 7270-5-15 15 amps 11-08348 $168.95 7270-5-20 20 amps 11-08349 $164.95 7270-5-25 25 amps 11-08350 $164.95 7270-5-30 30 amps 11-08351 $146.95 7270-5-35 35 amps 11-08352 $164.95 Klixon 7274 series are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The commercial grade version is the Klixon 7277 series. The 7274 features a tripfree, indicating reset button and is available in standard ratings from to 20 amps. A wiping action contact design assures low voltage drop, faster trip time and high reliability in low voltage applications. They are available in standard ratings from to 20 amps. A water resistant panel seal designed to fit over the push button actuator is available for applications that require this type of protection. Features: Uses minimum space, Light weight, Trip free, MIL-C-5809 qualified, Low amp, High vibration resistance, Typical use: Military airborne vehicle and equipment protection. Specifications: MS#: MS26574-1.5. Vibration: 10G minimum, 50500 Hz (other vibration levels available). Mechanical Shock: 35G. Acceleration: 10G. Weight: 7274-2 (MS 26574): 28 grams maximum; 7274-4 (MS 26574 A): 28 grams maximum; 7274-11 (MS 22073): 33 grams maximum; 7274-69 (MS 22073V): 33 grams; 7274-70 (MS 26474L): 33 grams. Interrupt Current: 0.505 amps: unlimited at 28 VDC; 7.5015 amps: 2,000 amps at 28 VDC; 0.501.50 amps: unlimited at 120 VAC, 400 Hz; 25 amps: 800 amps at 120 VAC, 400 Hz; 7.5020 amps: 500 amps at 120 VAC, 400 Hz. Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive; 5,000 cycles: 120 VAC, 400 Hz resistive; 2,500 cycles: 30 VDC inductive; 5,000 cycles: 30 VDC resistive; 10,000 cycles: Mechanical, no load Description Current Rating Part No. Price 7274-2-1.5 1.5 amps 11-08353 $21.85 7274-2-2 2 amps 11-08354 $21.75 7274-2-2.5 2.5 amps 11-08355 $21.75 7274-2-3 3 amps 11-08356 $21.75 7274-2-4 4 amps 11-08357 $21.75 7274-2-5 5 amps 11-08358 $21.75 7274-2-7.5 7.5 amps 11-08359 $21.75 7274-2-10 10 amps 11-08360 $21.75 7274-2-15 15 amps 11-08361 $21.75 7274-2-20 20 amps 11-08362 $21.75 A lightweight, high performance, nonambient temperature compensated circuit breaker. The series features a tripfree design that prevents the circuit breaker from being closed manually on overload. Features: Miniature size, Light weight, Tripfree design, Current rating: 5 amps, AS58091 qualified (MS25244), High vibration resistance, Typical use: Aircraft, avionics and electrical systems. Specifications: MS25244-5. Voltage Drop: 0.25. Vibration: 10G. Mechanical Shock: 30G at peak. Acceleration: 10G. Weight: 38.9g. Operating Altitude: 65,000 ft Description Current Rating Part No. Price 3TC7-5 5 amps 11-08374 $47.25 3TC7-7.5 7.5 amps 11-08375 $46.85 3TC7-10 10 amps 11-08376 $47.25 3TC7-15 15 amps 11-08377 $46.50 3TC7-20 20 amps 11-08378 $47.25 3TC7-25 25 amps 11-08379 $46.50 3TC7-30 30 amps 11-08380 $46.85 3TC7-35 35 amps 11-08381 $46.85
Their light weight and small size make them especially well suited for aircraft, avionics and electronic systems. The Klixon trademark has set the standard for aerospace circuit breakers and the TC series offers the endurance and reliability required by exacting military specifications. The 2TC series breaker ratings are coordinated so any rating will trip before another rating twice its capacity in the event of a fault. of up to 6,000 amps letthru current. This results in improved overall equipment performance since only the smallest faulted circuit is interrupted, while larger circuits remain operational. Ambient compensated circuit breakers let designers specify smaller gauge wire where the circuit breaker and wiring are exposed to different ambient temperatures. They are especially suited for application where ambient temperature exceeds the 160F (71C) maximum of nonambient compensated thermal circuit breakers. The TC series may be applied where operating temperatures are as high as 250F (121C) with no derating of the circuit breaker. This eliminates the need for cooling air and allows substantial weight, space, and cost savings. The complete line of TC series circuit breakers is tripfree. The circuit breaker cannot be maintained closed during an overload even with the actuator button held closed. For its miniature size, the 2TC series offers unusually high current interrupting capacity. Overloads can be safely interrupted without affecting calibration or operating performance in the standard 2TC series for: Overloads up to 6,000 amps at 28 VDC Overloads of 2,0003,500 amps at 120 VAC, 400 Hz. Features: Miniature size, Light weight, Tripfree design, High vibration resistance, High interrupting capacity, Coordinated ratings, AS58091 qualified (Also: Military Approvals, FAA PMA), Typical end use: Aircraft power distribution systems Specifications: Vibration 10G minimum, 50500 Hz (other vibration levels available) Mechanical Shock 50G. Acceleration 10G Description Current Rating Part No. Price 2TC2-1 1 amps 11-08382 $21.75 2TC2-2 2 amps 11-08383 $21.75 2TC2-2-1/2 2.5 amps 11-08384 $21.75 2TC2-3 3 amps 11-08385 $21.75 2TC2-4 4 amps 11-08386 $21.75 2TC2-5 5 amps 11-08387 $21.75 2TC2-7.5 7.5 amps 11-08388 $21.75 2TC2-10 10 amps 11-08390 $21.75 2TC2-15 15 amps 11-08394 $21.75 2TC2-20 20 amps 11-08395 $21.75 2TC2-25 25 amps 11-08396 $21.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Klixon 6752-100 series thermalmagnetic circuit breakers are designed and manufactured to meet stringent military standards with the reliability of the 6752 design. The 6752-100 is similar to the 6752-12 in size, and includes current ratings ranging from 50 to 100 amps. The higher interrupting capacity, vibration resistance and longer cycling life of the 6752-100 series exceed previous military standards. In addition, the 6752-100 series provide ambient compensation, fault coordination of all ratings an option for auxiliary circuits. The 6752-100 series circuit breakers maintain their performance capabilities by means of a thermal compensator in the temperature range of -40C to 70C. A deionizing grid and magnetic assist enable the 6752-100 series to successfully interrupt four fault currents of 6,000 amperes two at sea level and two at 60,000 feet on either a 120 VAC, 400 Hz system or a 30 VDC system. Features: Proven reliability and performance of the 6752 series circuit breaker, Tripfree design, Circuit protection unaffected by temperature fluctuations MIL-C-5809 qualified, Ambient compensated, High vibration resistance, High interrupting capacity: 6,000 amps, Typical use: Military, Specifications: Vibration: 10G, 502,000 Hz (other vibration levels available). Mechanical Shock: 30G. Acceleration: 10G. Weight: 113.6 gram (0.25 pound) maximum. Interrupt Current: 120VAC, 400 Hz: 3,500 amps; 28 VDC: 6,000 amps. Endurance: 5,000 cycles: 120 VAC, 400 Hz inductive;5,000 cycles: 120 VAC, 400 Hz resistive; 2,500 cycles: 28 VDC, 400 Hz inductive; 5,000 cycles: 28 VDC, 400 Hz resistive; 5,000 cycles: Mechanical, no load Description 6752100-50 6752100-60 2752100-70 6752100-75 6752100-80 6752100-90 6752100-100 Current Rating 50 amps 60 amps 70 amps 75 amps 80 amps 90 amps 100 amps Part No. 11-08397 11-08398 11-08399 11-08400 11-08401 11-08402 11-08403 Price $193.95 $193.95 $233.95 $193.95 $193.95 $189.50 $189.50
529
CIRCUIT BREAKERS
KLIXON 7270 & 7271 CIRCUIT BREAKERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Klixon 7270/7271 series circuit breakers 7271-3-15 were designed to uti7271-8 lize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems. The units are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 72713). In each of these Klixon circuit breakers, 7271-3 the bi-metallic element Series 7270-1 assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the Klixon disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. FEATURES: Trip-free Snap-acting Thermal Element Simplicity of Design Lightweight High Rupture Capacity - 3500 Amps, 120 VAC, 400 Hz 4000 Amps, 30 VDC Small Size Part No. Price Part No. Price Part No. Price 7270-7-10 $149.50 7271-3-25 $124.95 7270-1-3 $124.95 7270-7-15 $155.95 7271-3-35 $111.95 7270-1-5 $124.95 7270-7-20 $158.95 7271-8-3 $113.95 7270-1-7.5 $121.95 7270-7-25 $172.95 7271-8-5 $103.95 7270-1-10 $123.95 7270-7-30 $155.95 7271-8-71/2 $112.95 7270-1-15 $118.95 7270-7-35 $198.75 7271-8-10 $113.95 7270-1-20 $124.95 7271-3-3 $111.95 7271-8-15 $103.95 7270-1-25 $125.95 7271-3-5 $124.95 7271-8-20 $108.95 7270-1-30 $124.95 7271-3-7.5 $121.95 7271-8-25 $99.85 7270-1-35 $109.95 7271-3-10 $124.95 7271-8-30 $99.85 7270-7-3 $161.95 7271-3-15 $124.95 7271-8-35 $108.95 7270-7-5 $155.95 7271-3-20 $111.95 7270-7-7.5 $131.95 The last dash no. in the Part Number is the Amperage rating
Make your panel a plug and play panel with these heavy-duty electrical connectors. The connectors are designed for either panel mount or free hanging. Connectors are available in 4, 6, 9, 12, 18, 24, and 36 pin configurations. Choose the pins and sockets based on wire size. The pins and sockets are top quality and are gold/nickel plated. The plugs are sold in pairs and include both the plug and the connector. Part No. Configuration Price 11-02147 4 pin $8.95 11-02148 6 pin $10.45 11-07356 9 pin $11.75 11-02149 12 pin $11.85 11-02150 18 pin $12.95 11-07357 36 pin $15.50 Part No. Wire Gauge Size Price 11-02153 24/20 $1.14 11-02154 18/16 $1.20 Part No. Wire Gauge Size Price 11-02155 24/20 $1.29 11-02156 18/16 $1.51 SEAL-ALL CRIMP TOOL - Crimp tool works with all Seal-All Terminals and seals. Its compact, low-cost parallel jaw design eliminates terminal rocking. P/N 11-06592........................$37.95 Connectors SPT015/16 SPT152/153 SPT039/40 SPT017/18 SPT442/43 SPT019/20 Pins SPT103-1 SPT099-1 Sockets SPT105-1 SPT101-4
This circuit breaker has no mechanical parts, except for the reset switch. The power switching and control components are completely solid state. It has the added benefit of over- voltage and under-voltage protection. It will turn off if the input voltage foes too high, protecting valuable avionics or other equipment. NOT FAA APPROVED. For experimental aircraft only. Model No. Amps Volt Part No. Price ECB-28-01 1 28 11-01156 $76.50 ECB-28-02 2 28 11-01157 $76.50 ECB-28-05 5 28 11-08703 $76.50
STATIC DISCHARGERS
ESD-1 STATIC WICK - Length: (including
mounting base) 7.65 inches. (discharger element) 4.75 inches. Weight: Less than 4.5 grams. Airspeed: To 150 knots. Altitude: To 20,000 feet msl. Temperature: +85C to -55C, MILSTD0202C, Method 102A, Condition D. Solvents: No physical changes after one hour immersion in aviation gasoline, jet fuel or hydraulic fluids. Equivalent to Cessna P/N C592001-0201. Note: This is Non-Certified Version. Fully Qualified to MIL-D-9129D P/N 11-10574........... $12.95
The 7277 series circuit breakers is physically and electrically identical to the 7274-2 style circuit breaker, with the exception that the 7277 series has wider calibration limits. Originally developed as an alternative to slow blow fuses, the trip free 7277 is used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data process7277-1 7277-2 ing and telecommunications equipment, computers, Aux. Switch Contact flight simulators, construction, material handling and other industrial electronic equipment. FEATURES: The 7277 series is designed for applications that do not require the tighter performance characteristics and approvals of our military circuit breakers. Small size Light Weight Inexpensive Auxiliary switch 7277-1 Only Longer Push Buttons 7277-5 Only Temp. C +25 Min Ult Traip 110% Max Ult Trip 150% Trip Time - Seconds 200% 500% 1000% 2-35 .15-1.75 .028-.8
STATIC WICK
Comes with 2 holes to rivet to trainline edge and plain wire extension. Eligible For Installation: Beech Baron 58, Cessna 402, Eurocopter: BK117, BK117 C-2 P/N 11-04154 .... $49.50
* Performance characteristics and dimensions are equivalent to 7274 Calibration: 1/2 - 20 amps* Part No. 7277-5-1 7277-5-2 7277-5-3 4200-005-4 7277-5-7.5 7277-5-10 7277-5-15 7277-1-1 7277-1-2 Price $29.85 $29.85 $29.85 $29.65 $29.90 $29.85 $17.95 $38.75 $38.25 Part No. 7277-1-3 7277-1-4 7277-1-7.5 7277-1-10 7277-1-15 7277-2-1/2 7277-2-3/4 7277-2-1 7277-2-1.5 Price $38.25 $38.25 $38.25 $37.90 $37.89 $85.75 $17.95 $17.95 $17.95 Part No. 7277-2-2 7277-2-2.5 7277-2-3 7277-2-4 7277-2-5 7277-2-7.5 7277-2-10 7277-2-15 7277-2-20 Price $17.95 $88.50 $17.95 $17.95 $17.95 $18.50 $17.95 $17.95 $17.95
For general aviation aircraft (speeds below 300 mph). Mounting: (2) #4-40 screws, 100% countersunk. Length:8.75 Weight: 0.17 oz. P/N 11-16630........... $54.60
For general aviation & business class aircraft. FAA/PMA, MIL-9129D. Mounting: (2) #8-32 flat head screws. Length: 7-15/32. Wt: 0.53 oz. P/N 11-16325......................... $72.75
Prices Subject to Change Without Notice
530
CIRCUIT BREAKERS
These bi-metallic single pole breakers weigh less than 2oz. and especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Max. operating voltages: 32 VDC & 250 VAC (to 400 Hz). W23 SERIES W31 SERIES W58 SERIES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
White band around body of reset button becomes visible if breaker trips. Has heater wire for fast tripping. 8-32 screw terminals.
These are combination single pole switches and circuit breakers. Has a plain steel toggle w/ rating inscribed on tip. 8-32 screw terminals.
Recessed reset button has red band around it for visible trip indication. 6-32 screw terminals.
P&B P/N W23X1A1G1 W23X1A1G2 W23X1A1G3 W23X1A1G4 W23X1A1G5 W23X1A1G7.5 W23X1A1G10 W23X1A1G15 W23X1A1G20 W23X1A1G25 W23X1A1G30 W23X1A1G35 W23X1A1G40 W23X1A1G50 W31X2M1G5 W31X2M1G10 W31X2M1G15 W31X2M1G20 W31X2M1G25 W31X2M1G30 W31X2M1G35 W31X2M1G40 W31X2M1G50 W58XC4C12A1 W58XC4C12A2 W58XC4C12A3 W58XC4C12A4 W58XC4C12A5 W58XC4C12A7 W58XC4C12A10 W58XC4C12A15 W58XC4C12A20 W58XC4C12A30
Aircraft Application Cessna Piper 111-201-105 111-202-105 111-203-105 111-204-105 CB-2305A S-1232-5 454656 CB-2307A CB-2310A 454657 CB-2315A 454658 CB-2320A 454659 CB-2325A 454660 CB-2330A 454661 CB-2335A 454663 CB-2340A 454665 CB-2350A 454662 Beech
431-201-101 431-202-101 431-203-101 431-204-101 435-205-101 435-207-101 435-210-101 435-215-101 435-220-101 435-230-101
S-1360-1A,-1L S-1360-2A,-2L S-1360-3A,-3L S-1360-4A,-4L S-1360-5,-5L S-1360-7,-7L S-1360-10,-10L S-1360-15,-15L S-1360-20,-202 S-1360-30,-302
Prices Ea. $29.90 $31.50 $19.45 $49.85 $21.75 $21.95 $20.75 $20.85 $21.75 $19.65 $21.75 $21.75 $21.90 $20.85 $25.50 $25.50 $25.50 $25.50 $25.50 $25.50 $25.50 $25.50 $24.50 $6.75 $7.90 $6.75 $11.80 $5.50 $6.85 $5.50 $5.50 $5.50 $6.95
Feature a bi-metallic snap-acting disc as the sensing element. Widely used in production and military aircraft. The most popular models are illustrated. Models PSM and PSM-N are available in the following ampere ratings: 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neckmounting style is wanted by placing N after ampere rating. Example: PSM-10N (P/N 11-04244) $94.25 Ea. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM. Example: PDLM-50 (P/N 11-04241) .. $136.95 ea.
These heavy duty circuit breakers are ideal for use with aircraft alternators and other applications using high amperage. 10-32 screw terminals. Size: 1-3/8d x 1-3/8h x 1/2w. 60 Amp P/N 11-02191 ......................... $16.00
W33S2N1Q series breakers are 2 pole rocker actuated. Pole 1 is switch only, pole 2 is series trip overload sensing. These breakers are non-lighted with white rocker. W33S4B1Q series breakers are also 2-pole rocker actuated. Pole 1 is switch only, pole 2 is series trip overload sensing. These breakers feature 20 amp max. switch & amber plastic rockers.
Item / Description W33S4B1Q-5 Amber 24VDC W33S4B1Q-10 Amber 120VAC W33S4B1Q-15 Amber 120VAC W33S4B1Q-20 Amber 120VAC W33S1N1Q-5 Black W33S1N1Q-10 Black W33S1N1Q-15 Black W33S1N1Q-20 Black W33S2N1Q-5 White W33S2N1Q-10 White W33S2N1Q-20 White Amps 5 10 15 20 5 10 15 20 5 10 20 Part No. 11-01887 11-01888 11-01889 11-01976 11-01977 11-01978 11-01979 11-01980 11-01981 11-01890 11-01983 Price $35.95 $41.90 $27.75 $33.25 $26.75 $34.40 $28.90 $32.95 $37.85 $29.90 $29.90
These circuit breakers have no mechanical parts, except for the reset switch. The power switching and control components are completely solid state. They have added benefit of overvoltage and undervoltage protection. Will turn off if the input voltage goes too high, protecting valuable avionics or other equipment. The circuit breakers operate differently than conventional ones in the following ways: If the circuit breaker trips, the switch will remain in the up or on position, but a red LED will illuminate indicating the condition. To reset the circuit breaker, the switch is set to off, then back to on. Removing power from the circuit breaker via a master switch and then restoring power will perform the same function. If a short or overcurrent condition exists at the output, the circuit breaker will continue to trip off after a reset. The electronic circuit breaker is a 3-terminal device. In addition to the usual 2 terminals, a ground reference is required for the electronics to operate and as a reference for the overvoltage & undervoltage protection. The 14V circuit breakers will shutdown with an overvoltage of 16V & undervoltage of 10V. The 28V will shutdown with an overvoltage of 33V & undervoltage of 20V. Available in 14V & 28V versions, with the following current levels: 1A, 2A, 5A, 10A. Not FAA Approved. For experimental aircraft only. Model No. ECB-28-01 ECB-28-02 ECB-28-10 ECB-28-05 Amps 1 2 10 5 Volts 28 28 28 28 Part No. 11-01156 11-01157 11-01159 11-08703 Price $76.50 $76.50 $76.50 $76.50
These heavy duty 70 AMP circuit breakers are ideal for use with aircraft alternators and other applications using high amperage. 10-32 screw terminals. 1 3/8 D x 1 3/8 H x 1/2 W. P/N 11-05652 ......................... $17.85
These fuseholders are non-indicating, plate mounted. The body is molded black phenolic. Knob grips fuse and pulls it from holder when knob is removed. Spring provides contact pressure on ends of fuse. For use with fuse size 1/4 x 1-1/4. Type HKP. P/N 11-13400 ................ $1.87 Nylon Twist-Lock in-line fuseholder. Supplied with 8 loop of 14-gauge wire and 1 spring to accommodate AGC fuses. Simple twist-lock allows easy fuse removal & replacement. P/N 11-04010 ................ $3.35 Bayonet knob in-line fuseholder. Supplied with 8 loop of 14-gauge wire and 1 spring to accommodate AGC fuses. Simple twist-lock allows easy fuse removal and replacement. P/N 11-01359 ................ $2.75
FUSE HOLDERS
AGC-type fuses are glass-enclosed with a single fuse element. Fast acting to protect sensitive instruments and radios. Fuse dimensions 1/4 dia. x 1-1/4 long. Part No. 11-03743 11-03746 11-03749 11-03753 11-03754 11-03744 Amp Price Each Rating 1 $0.29 2 $0.24 3 $0.48 5 $0.39 7 $0.53 10 $0.38 Part No. 11-03745 11-03747 11-03748 11-03750 11-03751 Ampere Price Each Rating 15 $0.22 20 $0.48 25 $0.48 30 $0.48 35 $0.48
FUSES
531
SWITCHES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Ultra-miniature switches are rated at 6 amps at 125V AC and 4 amps at 28V DC. Solid silver contacts. Terminals are gold flashed to inhibit oxidation and to provide easier soldering. Case material is green diallyl phthalate resin. Bushing thread size: 1/4-40, usable in panel thickness up to 1/4. Micro Switch Co. have discontinued the manufacture of the 8A and 8H type switches, so switches by alternate manufacturers will be furnished. In most instances, Alco switches will be supplied. Switches furnished complete with locking ring and attaching hardware. Alco Sw. Micro Sw. Toggle Price Contact Part No. Part No. Circuit* Each MTA-106D 8A1011 SPST 01 $9.85 MTA-106E 8A1021 SPDT 02 $10.95 MTA-106G 8A1041 SPDT 04 $15.85 MTA-206N 8A2011 DPST 01 $12.85 MTA-206P 8A2021 DPDT 02 $11.75 MTA-206S 8A2041 DPDT 04 $22.25 JMT-226 8A2061 DPST 06 $22.50 MTA-306D 8A3011 3PDT 01 $23.25 MTA-406N 8A4011 4PDT 01 $24.50 * See Toggle Circuit Table TOGGLE CIRCUIT TABLE LEVER/CIRCUIT Circuitry* Toggle RELATIONSHIP
Circuit One Side 01 02 04 05 06 On On (On) On On Center None Off Off Off None Other Side On On (On) (On) (On)
Prevents inadvertent operation of the switch. Switch can be operated only when the spring-loaded guard is lifted up. Returning guard to the down position forces the switch lever to the off position. Single-hole type for neck-mount switches such as AN3021 and AN3027. 3-hole type for panel-mounted switches such as AN3023. Color: Red. MS25224-1 (one hole) .............. $11.50 Ea. MS25224-2 (3 holes)................. $19.85 Ea. Spring Loaded Switch Guards. Klixon switch guards can be used with 2 or 3 position switches. Covers are molded out of Thermoset molding materials. Guard covers are spring loaded to either close or lock in an open position. Description Pos. Color Code Part No. Price Phenolic 2 Red 2 11-06221 $23.75 Metal 2 Green 4 11-06222 $36.60 Phenolic 3 Red 9 11-06223 $14.75 Phenolic 2 Red 10 11-06224 $14.75 Phenolic 2 Red 11 11-06225 $24.75 This versatile split red master switch has been used in virtually all single engine Cessna models since 1970 and can be used in most light aircraft with single alternator systems. Left rocker normally used for alternator and right half for battery. Order mount separately. Red Switch..............P/N 11-15900 ................$29.70 Beige Switch ...........P/N 11-05733 .................$38.50 Mount ......................P/N 11-15910 ...................$1.84 This is a split switch used in many production aircraft featuring an On-Off switch on left for rotating beacon and On-Off switch on right for anti-collision strobe. Switch is grey. New manufacture. P/N 11-14910 ................$9.65 AN3021-1 Toggle switches are available with 2 or 3 operating positions, one or three hole mounting and a variety of circuitry and electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full AN standard size and Ultra Miniature 1/2 size. The leading manufacturers of toggle switches are Micro Switch, Alcoswitch, Cutler Hammer, and JBT (now Cutler Hammer). Orders will be filled with switches of manufacturer whose product is available in local stock.
Mfgrs. P/N JBT - MS No. JBT - MS No. JBT - MS No. JBT - MS No. JBT - MS No. JBT - MS No. JSBT-MS No. JBT - MS No. Size 1/2 Miniature 1/2 Miniature 1/2 Miniature Full Standard Full Standard Full Standard Full Standard Full Standard Contact SPDT SPST SPDT DPDT DPST DPDT DPDT DPST Toggle Circuit * 1* 2* 3* 1* 2* 3* 5* 7 Price $16.50 $10.90 $14.50 $31.75 $16.50 $29.75 $23.90 $25.75
MS25224 SWITCHGUARDS
*Use the 01 circuitry for On-Off switch. In hook-up, use center terminal & one side terminal. Leave other side terminal blank. The operating sequence above is repeated in multipole devices. Each pole has double-throw circuitry and consists of three terminals which exit at the bottom of the switch case. The keyway is a helpful reference when you are applying a switch with the momentary (ON) circuit at one of the extreme lever positions. Are your switch covers faded by the sun or just looking grimy? These replacement switch covers fit on nearly every typical switch in Cessna Twins. Switch cover sets are available for 300 series twins (4 red, 3 black, and 18 white switches) and 400 series twins (4 red, 3 black, & 23 white switches). Also available are sets of 30 mini-switch covers for audio panels, prop sync, fuel transfer pumps, DME, etc. 300 Series ............................ P/N 11-22210 ................... $29.95 400 Series ............................ P/N 11-22220 ................... $29.95 Mini Switch Package ............ P/N 11-22230 ................... $14.85 Dress up the appearance of your panel and color code your toggle switches with high quality vinyl covers that do not have a nipple at the end of the cover. Available in various colors. Standard Size Red ............11-00815 ..........$1.35 Green .......11-00817 ....... $1.35 White .........11-00816 ..........$1.35 Blue ...........11-00819 ....... $1.35 Yellow ........11-01698 ..........$1.35 Black .........11-02823 ....... $1.35 Mini Size Red ............ 11-00820 ..........$1.35 White ........11-00821 ....... $1.35 One-piece bushing and case construction, furnished with beveled nut for finished appearance. It has a relatively high current carrying capacity (3 amps at 125V AC) and a life expectancy of 10,000 operations at rated current. Momentary type SPDT switch, ideal for use as a mic switch on control wheel. Furnished with. 205 dia. black pushbutton. Body is .354 dia. x .650 long. Mounts in 1/4 dia. hole. P/N 11-03909 ................... $13.90 Skylox is a unique product that will provide safety to your aircraft ground service crews. The circuit breaker safety lock is easy to use and is an innovative safety solution, all at a very low price. Simple to use. Just squeeze and place over an open circuit breaker to prevent accidental closing of breaker circuits being serviced. Regular round Skylox for standard size breakers and Skylox L for larger sizes. Hexagonal shape easily differentiates between the two sizes. Add Skytags for added safety. Red with white letters and all white backs for adding notes or special instructions. NOTICE! Skylox are designed for use by ground maintenance crews during ground maintenance procedures only! Skylox are NOT to be used during flight operations. Danger ..... P/N 11-07737.....$2.20 Warning....P/N 11-07738 .....$2.50 Large ....... P/N 11-07734.....$4.65 Standard ..P/N 11-07736 .....$3.75
TOGGLE SWITCHES
AN3027-7
AN No. AN3021-1 AN3021-2 AN3021-3 AN3027-1 AN3027-2 AN3027-3 AN3027-7 AN3027-4 MS No. MS35058-21 MS35058-22 MS35058-23 MS35059-21 MS35059-22 MS35059-23 MS35059-27 MS35059-24
* See Toggle Circuit Table Circuitry with Toggle at: TOGGLE CIRCUIT TOGGLE TABLE CIRCUIT *Available toggle lever CODE positions & circuits (*) UP CENTER DOWN **Momentary contact - when 1 On Off On the toggle lever is placed in 2 On None Off a momentary position and 3 On None On then released, the toggle 4 On Off On** lever automatically returns 5 On* Off On** to a neutral position. 6 Off None On*
7 On Off None
A quality momentary SPST switch, perfect as a starter button, Comes with a special boot that keeps out dust and weather. P/N SPB01 ..........................$4.90
Normally open. Found in many Piper aircraft. Color: Black. #8631ZBD2 ........... P/N 11-01899 ..................$8.50
532
CM WP
Otto Controls has been making the switches used in a majority of military and commercial flight grips manufactured for the last 40 years. Otto has evolved from a switch supplier into a major gri supplier with flight grips in numerous military and commercial aircraft. These rugged grips are the same as our military qualified grips but without the expensive threaded connector. Grips have a 1.15ID which can be adapted to a 3/4 or 7/8 joystick with separate sleeves sold below. 2-posi4-Way PushOtto Our Price Grip Kit tion Trim Button Part No. Part No. Each Trigger Switch Switch B8 G2-0048 1 1 3 11-00751 $598.00 Cobra G2-0049 1 1 4 11-00752 $569.00 T4-0204 4-WAY SWITCH FOR B8 - Four way trim with a large hat style button. Fits into the trim position of the G2-0048 and G2-0049 flight 11-07956 $183.95 grip kits. Can handle up to a 1 amp inductive load at 28VDC. Joystick O.D. 3/4 shaft 7/8 shaft Grip/Joystick Sleeve Part No. Our Part No. 302379 11-00753 302380 11-00754 Price $36.75 $58.00
Electrical: (at 28VDC or 115VAC, 60/400 Hz.) Load Amperes Life (Nominal) Resistive 16 25,000 Inductive 10 25,000 Motor 1/2 HP 25,000 No. of Poles OTTO No. Circuit 1 T7-131A1 on-off 1 T7-131B1 on-on 1 T7-131C1 mom-off 1 T7-131D1 mom-on 1 T7-131E1 mom-of-mom 1 T7-131F1 on-off-on 1 T7-131G1 mom-off-on 2 T7-231A1 on-off 2 T7-231B1 on-on 2 T7-231C1 mom-off 2 T7-231D1 mom-on 2 T7-231E1 mom-off-mom 2 T7-231F1 on-off-on 2 T7-231G1 mom-off-on Note: MOM designates Momentary On. Our P/N 11-00755 11-00756 11-00757 11-00758 11-00759 11-00760 11-00761 11-00762 11-00763 11-00764 11-00765 11-00766 11-00767 11-00768 Price ea. $10.90 $10.90 $10.90 $10.90 $10.90 $10.90 $10.90 $16.25 $10.75 $11.85 $10.95 $11.75 $15.90 $11.75
ME HA AP LG EP CS IN EL AV TO
Military MS27718 qualified. High reliability, rugged. Solder turret for wire attachment. 303 stainless toggle, 15/32 bushing version has a waterproof seal. Specifications Electrical: (at 28VDC or 115VAC, 60/400 Hz.) Life Load Amps (full load) Resistive 5 30,000 Inductive/Motor 2 30,000 No. of MIL Poles No. 1 MS27718-21-1 1 MS27718-22-1 1 MS27718-23-1 1 MS27718-26-1 1 MS27718-27-1 1 MS27718-31-1 2 MS27719-21-1 2 MS27719-22-1 2 MS27719-23-1 2 MS27719-26-1 2 MS27719-27-1 2 MS27719-31-1 Note: MOM designates Life Load Amps (full load) Lamp 1 30,000 Mechanical Life n/a 100,000 Our P/N 11-00772 11-00773 11-00774 11-00775 11-00776 11-00777 11-00778 11-00779 11-00780 11-00781 11-00782 11-00783 Price ea. $22.50 $20.85 $23.75 $23.75 $25.50 $23.75 $23.75 $24.25 $24.85 $25.75 $24.75 $23.00
MIL qualified. Dustproof, snap action, solder terminals, rugged reliable construction.
P1 MOMENTARY SWITCHES
SPECIFICATIONS
OTTO Circuit No. T3-11111 on-off-on T3-11121 off-on T3-11131 on-on T3-11141 mom-on T3-11151 mom-off-mom T3-11161 mom-off-on T3-11211 on-off-on T3-11221 off-on T3-11231 on-on T3-11241 mom-on T3-11251 mom-off-mom T3-11261 mom-off-on Momentary On.
Electrical: (at 28VDC or 115VAC, 60/400 Hz.) Load Amperes Life (Nominal) Resistive 10 25,000 cycles Inductive/Motor 5 25,000 cycles Lamp 3 25,000 cycles PRESS FIT Button MIL No. Otto No. Color MS25089-1AL P1-12121 Red MS25089-1A P1-12122 Black MS25089-1AW P1-12129 White Our Part No. 11-00745 11-00746 11-00747 Price $12.50 $12.45 $11.50
Push and the P5 series switch holds on push again and the P5 switch turns off. Positive tactile feedback is featured so the operator is clearly aware the switch mode has been executed. The button returns to the original position after each actuation. To guard against front panel splash and dirt, the P5 series is sealed at the button with OTTOs patented rolling sleeve principle.The terminals are sealed with epoxy, providing a seal against flux during wiring and behind panel dirt and moisture. The combination of sealing provides smooth operation over a wide temperature range. Watertight sealing to 1meter (IP68) pressure is also available. Load Resistive Inductive Amps 10 5 Life (full load) 25,000 25,000 Price $14.90 $14.85 $11.25 Load Motor Lamp Amps 3 1 Life (full load) 25,000 25,000
THREADED BEZEL Button Our MIL No. Otto No. Price Color Part No. MS25089-1CR P1-32121 Red 11-00748 $11.75 MS25089-1C P1-32122 Black 11-00749 $11.50 MS25089-1CW P1-32129 White 11-00750 $12.75
PS BV
Switch Part No. Price Thread Mount 11-00769 $13.75 Red Thread Mount 11-00770 $13.75 Black Thread Mount 11-00771 $16.00 White
533
SWITCHES LIGHTS
SILVER SWITCH CONTACTS (MOST)
CM WP ME HA AP
17-410 17-420
Commercial 12 VDC Illuminated & Non-Illuminated Toggle, Rocker, Push-Button, Pull Switches... Incandecent & L.E.D. Indicator Lights...Switch Guards...Lever Covers
LEVER SWITCHES
20 AMP SILVER CONTACTS
NonIlluminated On-Off On-On On-Off-On ( Single Pole 11-103 11-107 11-123 )=MOMENTARY Price $3.70 $5.00 $4.70
ROCKER SWITCHES
SILVER CONTACTS
Single Pole 14-100 14-101 14-102 14-103 14-104 Non-Illuminated On-Off Off-(On) On-On On-Off-On (On)-Off-(On) Price $1.75 $4.75 $3.50 $2.95 $4.70 Double Pole 14-200 14-210 14-220 14-225 Price $4.60 $6.00 $8.50 $9.25
Illuminated Red Green Amber Blue Clear 11/16 Lever 11-115 11-116 11-117 - - --$6.90 Ea.
Illuminated Single Pole (20 AMP, OnOff-OFF) Red Green Amber Blue Price 14-305 14-306 14-307 14-308 $5.75
DASH LIGHTS
Replaceable Lamp MTG. Price HOLE 17-410 17-411 17-412 17-413 1/2 $4.75 Replacement bulb........P/N BA7-12.........$0.97 Jumbo 17-420 17-421 17-432 17-423 3/4nut $6.75 17-440 17-441 17-442 17-443 1nut $16.75 Non-Replaceable Lamp - *4 Wire Leads *17-165 *17-466 *17-467 -1/2 *$5.25 17-210 17-211 17-212 -9/32 $8.50 Red Green Amber Blue
PUSH BUTTON
Off-(On), 5 AMP Mounting Hole: 1/2 Aluminum Guard.....................P/N 15-112 ................ $9.85 Off-(On) / Push On-Push Off, 20 AMP Mounting Hole: 1 Red Button ...........................P/N 15-132 ................ $7.50 Black Button .........................P/N 15-133 ................ $7.50 Off-(On), 40 AMP, Sealed Mounting Hole: 5/8 Screw Terminal .......................P/N 15-100 ................ $6.75
LG EP CS IN EL AV TO PS BV
17-210
LEGEND LIGHTS
Illuminated words. Dimensions: 7/8 x 11/16 x 1-3/8 Mounting Hole: .629 Diameter (16 mm) Color Red Green Blue Part No. 11-06000 11-06060 11-06065 Price $14.95 $14.95 $15.50 Color Orange Yellow Clear Part No. 11-06050 11-06055 11-06070 Price $14.95 $14.95 $14.95
PULL SWITCHES
Pull On/Push Off, 75 AMP Chromed ..................... P/N 16-140 ................$9.75 ea.
REPLACEMENT BULBS
12 Volt ........................ P/N 31-963.1 ................... $1.96 24 Volt ........................ P/N 31-963.2 ................... $3.95 NOTE: Order labeling (words) separately from list below.
.25 Tab Terminal 20 AMP at 12/24VDC 15 AMP at 125VAC 1/2 panel hole size.
Single Pole Price *12-100 $3.95 *12-101 $5.75 *12-102 $6.75 12-103 $5.40 12-104 $7.45 ( )=Momentary
Lone Star Aviations line of LED panel indicators are available in a RED, Green, or Amber lenses. The indicators are TESTED by a PRESS to TEST function. The panel indicators are available in 14V and 28V, and non-dimmable and dimmable versions. Are installed into a (.468 mounting hole)in the aircrafts instrument panel. The indicator is a MS 25041 aluminum body and standard T1-3/4 led. Indicators are also available in 28vdc with standard led bulb as well as an FAA T1-3/4 bulb at 28vdc Description Color Volt Part No. Price Volt Part No. Price Non-Dim Red 14V 11-08768 $36.85 28V 11-08676 $64.25 Non-Dim Green 14V 11-08769 $36.75 28V 11-08677 $64.25 Non-Dim Amber 14V 11-08770 $36.75 28V 11-08678 $64.25 Dim Red 14V 11-08764 $39.50 28V 11-08673 $79.50 Dim Green 14V 11-08766 $39.50 28V 11-08674 $79.50 Dim Amber 14V 11-08767 $39.50 28V 11-08675 $79.50
534
This is a general purpose heat shrinkable tubing with a wide scope of applications including harnessing, wire bundling, strain reliefs or any application where components or cables must be insulated or packaged. Material is an irradiated, thermally stabilized, modified polyolefin which is vastly superior to thermoplastic type materials. Flexible & flame retardant. Shrinkable by any hot air source such as an electric hair dryer or any heating device delivering at least 250F. One person can complete installation in seconds. No need for special skills. Meets spec. MIL-I-23053B. Standard length - 4 ft. Min. purchase 4 ft. per size. Sold only in full 4 ft. lengths.
Expanded Size 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 1/16 1/8 1/4 3/8 1/2 Expanded I.D. .063 .093 .125 .187 .250 .375 .500 .750 1.000 .063 .125 .250 .375 .500 Recovered Nominal I.D. Wall .031 .017 .046 .020 .062 .020 .093 .020 .125 .025 .187 .025 .250 .025 .375 .030 .500 .035 White .031 .017 .062 .020 .125 025 .187 .028 .250 .025 Part No. 11-00700 11-00800 11-00900 11-01000 11-01100 11-01200 11-01300 11-01400 11-01500 11-09443 11-04029 11-04028 11-04030 11-04027 Price / 4 ft. Piece $1.83 $1.31 $1.89 $2.25 $2.35 $2.48 $2.85 $2.85 $4.25 $1.65 $2.60 $2.35 $2.70 $3.15
CM WP ME HA AP LG EP CS
Discount: 25% Discount on 12 or more 4 Lengths ( Per Size) Always order the largest size which will fit snugly over the component being covered. Wall thickness will be less if recovery is restricted during shrinking. Tinned copper tubular braid. Very flexible multi-strand braid. Excellent way to shield spark plug wires to reduce radio frequency interference (RFI). Fits over standard spark plug wire. Use 1/2 heat shrink to secure the ends. Shielding Braid per foot ....................... P/N 11-02463 .................. $0.77 Heat Shrink Tubing, 1/2, 4 ft. length ... P/N 11-01300 .................. $2.85 Used for static shielding on short lengths of wire or cable and for flexible bonding connections and ground straps. Made of extra flexible tinned copper wire. Rolled flat for spooling.
P/N 858 863 864 868 865 Nominal Flat Width 1/8 1/4 3/8 1/2 5/8 Current *Capacity Amps. 16 32 46 53 53 Wt./100 Ft. Lbs. 0.7 1.5 2.5 3.3 3.4 Price Per Ft. $0.34 $0.45 $0.94 $0.95 $0.99 100 Ft. $28.90 $38.25 $79.90 $80.75 $84.15
IN EL AV TO PS BV
This shielded and jacketed aircraft wire conforms to MIL-C-27500 and replaces MIL-C-7078/3. It incorporates MIL-W22759/18 basic wire and features a Tefzel insulation, a shield of tin-plated copper braid and a jacket of Tefzel. It is temperature rated to 150C & voltage rated at 600V. Top quality wire to military specifications.
Wire Gauge 22 20 18 16 14 12 8* Wt./1000 Ft. Lbs. 10.8 13.1 16.5 19.3 26.2 36.0 88.6 Part No. 11-14422 11-14420 11-14418 11-14416 11-14414 11-14412 11-14408 Price Per Foot $0.86 $0.66 $1.33 $0.96 $1.47 $1.90 $5.75 Price 100 Ft. $73.10 $56.10 $113.05 $81.60 $124.95 $161.50 $488.75
Clear PVC tubing for cable protection. Commonly called spaghetti. Meets Spec. MIL-I-63ID.
AWG Size 9 7 5 2 5/16 3/8 I.D. .118 .148 .186 .263 .312 .375 Wire Wall .020 .020 .020 .020 .025 .025 Size 20-22 16-18 12-14 8-10 6 4 Part No. 11-02200 11-02300 11-02400 11-02500 11-02600 11-02700 Price/Ft. $0.20 $0.28 $0.19 $0.21 $0.35 $0.38 100 Ft. $16.00 $22.40 $15.20 $16.80 $28.00 $30.40
VINYL TUBING
Vinyl tubing for gas lines,1/4 I.D. x 3/8 O.D... P/N 0500-071 .. $0.48 Ft. This premium vinyl tubing is recommended for use in extremely cold temperatures where tubing can be prone to becoming stiff and brittle. Manufactured to Spec. MIL-I-7444B, this tubing can be coiled and bent easily and will retain some flexibility even in extreme temperatures. Sold in 50 ft. and 100 ft. coils in the sizes listed below.
AWG Size 9 7 5 2 5/16 Wire Size 20-22 16-18 12-14 8-10 6 I.D. (In.) .118 .148 .186 .263 .312 Wall (In.) .020 .020 .020 .020 .025 50 Ft. Coil Part No. Price 11-16195 $11.75 11-16175 $14.75 11-16155 $17.25 11-16125 $19.75 11-16165 $25.25 100 Ft. Part No. 11-16190 11-16170 11-16150 11-16120 11-16160 Coil Price $24.25 $30.25 $35.25 $39.90 $51.25
15% Discount on 100ft. (Per Part No.) * 8 Gauge shielded wire is used in converting generator systems to alternators. Conforms to MIL-C-27500.
Description Part No. Price Per Foot 2-Conductor Shielded Wire - 22 Gauge 11-05650 $0.99 3-Conductor Shielded Wire - 22 Gauge 11-05651 $0.99 4-Conductor Shielded Wire - 22 Gauge 11-07773 $1.63 5-Conductor Shielded Wire - 22 Gauge 11-06580 $2.10 6-Conductor Shielded Wire - 22 Gauge 11-07774 $2.40 8-Conductor Shielded Wire - 22 Gauge 11-09782 $2.70 Note: For 406 Mhz ELT installations: Use 11-05651 3 conductor for the Kannad AF Compact Use 11-07773 4 conductor for the Artex ME406 & 11-07774 for Artex ME406 with GPS interface.
COAXIAL CABLE
This expandable sleeving is used in many aircraft applications and is used extensively in warbirds and in race cars. Flame retardant. Color: black. Sold in 100ft. lengths.
Size Rng 3/32-1/8 1/4-3/4 1/2-3/4 1/4-5/8 Part No. 11-01900 11-01901 11-01902 11-01903 Price $18.60 $32.80 $58.50 $39.50 Size Rng 1/21-1/4 3/41-1/2 1-1/42-1/2 1-1/23 Part No. 11-01904 11-01905 11-01906 11-01907 Price $89.90 $107.95 $236.95 $334.95
EXPANDABLE SLEEVING
NOTE: SOME WIRE ON THIS PAGE IS SOLD IN SPECIAL INCREMENTS ONLY (i.e.: 10 FT., 20 FT., 30 FT., ETC.) (As Noted) - Extra 15% discount for 1000 ft. (off the 100 ft. price) on all items on this page.
535
BATTERY CABLE
Heat-Shrinkable crimp butt splices completely insulate and protect electrical connections from water, condensation, salt and corrosion. Provides strain relief and protects against wire pull-out and vibration in the most rugged environments. Qualified to MIL-S-81824/1. BLUE Side 1 AWG: 20-16 -- I.D. dimensions Sealing Insert Max. no. of wires (mm/in) Crimp barrel size range 2.79(.110) 2 779-2680(CMA) 0.39-1.34(mm) Side 2 Sold by the Piece Sealing Insert Max. no. of wires 2.79(.110) 2 Blue (Tin-plated) .............................P/N 11-04427 ......................... $1.95 Blue (Nickel-plated) ........................P/N 11-04428 ......................... $5.90
The cable can be cut to length, jacket removed and conductors stripped to custom specifications. Awg Size: 18 Thickness: .016" Nominal O.D: .032" Applications: Public address systems, Intercoms, Internal telephones, Remote control circuits, Suitable for EIA RS-232 applications P/N 11-08280 ..................... $1.98 /ft.
One-step, heat-shrinkable wire and cable interconnection devices are a labor saving alternative to conventional wire and cable termination methods. Create strong, soldered connections. Consist of a heat-shrinkable sleeve and a premeasured, fluxed solder band. When heated, the tubing shrinks and the solder melts, making reliable, insulated terminations. .125SM ...................P/N 11-04480 .............$1.80 .200MD ...................P/N 11-04481 .............$0.93 .300LG ....................P/N 11-04482 .............$1.64 Consist of a heat-shrinkable, transparent, polyvinylidene fluoride sleeve with an inner, pre-fluxed, solder preform and two thermoplastic sealing inserts. When heat is applied, the solder melts and flows to provide a superior connection between the ground lead and the shield. The two thermoplastic sealing inserts melt and the outer sleeve shrinks to provide an environmentally protected termination. .125 ..........................P/N 11-07902 .............$0.58 1/4" ...........................P/N 11-07903 .............$0.57 .300 ..........................P/N 11-07905 .............$1.16
SOLDER SLEEVES
Side 1 Sealing Insert Max no. of wires 4.32(.170) 2 Side 2 Sealing Insert Max no. of wires 4.32(.170) 2 Red (Tin-plated) .............................P/N 11-04425 ......................... $1.38 Red (Nickel-plated).........................P/N 11-04426 ......................... $3.75
RED
AWG: 26-20 -- I.D. dimensions (mm/in)Crimp barrel size range 1900-6755(CMA) 0.95-3.37(mm) Sold by the Piece
YELLOW
AWG: 16-12 -- I.D. dimensions (mm/in) Crimp barrel size range 1900-6755(CMA) 0.95-3.37(mm) Sold by the Piece
Side 1 Sealing Insert Max no. of wires 4.32(.170) 2 Side 2 Sealing Insert Max no. of wires 4.32(.170) 2
Provides shielding when placed around electronic equipment proir to instalation. 4x4 mil. Sold by the inch. P/N 11-04483 . $3.95/inch
Yellow (Tin-plated) .............................. P/N 11-04429 .....................$2.35 Yellow (Nickel-plated).......................... P/N 11-04430 .....................$5.95
These color coded caps can easily be installed and removed from Klixon and similar type circuit breakers. Colored caps are used to flag designated circuit breakers for flight check and other purposes. In addition, they greatly improve grip. Wont shake loose and rattle like others can.
White ........P/N 11-04455 .....$2.35 Orange ....P/N 11-04456 .....$2.35 Red ...........P/N 11-04457 .....$2.35 Blue .........P/N 11-04458 .....$2.35 Yellow .......P/N 11-04459 .....$2.40 Black .......P/N 11-04460 .....$2.35 Gray ..........P/N 11-04461 .....$2.35 Green ......P/N 11-04462 .....$2.35 Discount: 10% Discount on 6 or more of the same Part number.
Circuit Breaker Safety Locks - With & Without Tags. Prevents the inadvertent closing of circuit breakers connected to equipment that is under repair or removed from the aircraft. Easily installed and removed from Klixon and similar type circuit breakers. Safety locks come both with and without tags. All locks are red, tags are red with white lettering. Tags measure 2x3/4. No Tag ......................................P/N 11-04463 ............ $3.75 Remove Before Flight ...............P/N 11-04464 ............ $7.95 Inoperative ................................P/N 11-04465 ............ $8.75
536
The Daniels AFM8 is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. Originally developed for the Air Force, the AFM8 meets the need for a miniature tool accommodating wire sizes 20 thru 32 AWG. The cycle controlled precision ratchet assures consistently accurate crimps every time. The tool has a built-in eight step selector knob for ease in dialing the correct crimp depth setting for the wire being used. P/N 11-04443 ......................... $299.75 The Daniels AF8 has virtually limitless application within the specified wire range of 12 thru 26 AWG. Over 1,000 turret heads or positioners are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The eight impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. The precision ratchet controls cycling on the tool in both directions of handle movement. This assures the same, accurate crimp every time. Its like having a quality control inspector at every work station. P/N 11-04442 .......................$283.95
CM WP ME HA AP LG
Male BNC/SMA Female adapter. Configuration: Straight Connector 1: BNC Male. Connector 2: SMA Female. P/N 11-10463 ........................... $14.85
Connector - RF Plug Housing Gender = Plug Terminate To Coaxial Cable Coaxial Cable Termination Type = Crimp P/N 11-08415 ........................... $48.85
This inexpensive, manual tool is lightweight and easy to use in the placement and/or removal of a terminal in a housing.
RF/Coaxial Adapter. Dimensions: a 1.25; b .562. Connector Type: Intra-Series Coaxial. Convert From: BNC Plug. Convert To: BNC Plug P/N 11-08416 ........ $5.50
BNC STRAIGHT ADAPTERS PLUG/PLUG 50 OHMS BNC STRAIGHT ADAPTERS JACK/JACK 50 OHM
20-24 AWG.
Insertion tool for grounding blocks and locking connectors. The AMP insertion tool for MATE-N-LOK pins. Contact sizes P/N 11-04437 .......... $27.50
EP CS IN EL AV TO PS BV
RF/Coaxial Adapter. Connector Type: Intra-Series Coaxial. Convert From: BNC Jack. Convert To: BNC Jack P/N 11-08417 ........ $6.85
Insertion tool for grounding blocks and locking connectors. The AMP insertion tool for MATE-N-LOK pins. Contact sizes 20-24 P/N 11-04438 ............. $26.75
TNC CONNECTOR AMP MALE, DUAL CRIMP RG142-400 TNC CONNECTOR AMP RIGHT ANGLE, MALE, DUAL CRIMP RG58
P/N 11-04449 .................. $46.25
This insertion & extraction tool consists of a handle, a cap, six insertion/ extraction tips, a plug, and a .050-in. hex wrench. The handle of the tool provides storage for the tips, plug and hex wrench. The insertion/extraction tips convert the tool for the appropriate product and are used to insert or extract connector contacts. Each tip is color coded according to specific type and wire size. The hex wrench is used to tighten the set screw which secures the tip in the tool handle. P/N 11-04436............. $26.50
P/N 11-04453 .........................................$65.75 TNC CONNECTOR FEMALE, DUAL CRIMP RG58 P/N 11-04453 .........................................$65.75
The insertion of contacts during assembly or replacement during repair is quick and easy with the appropriate tools. The tools have to fit the contacts and the connectors if assembly and repair are to be carried out correctly. Plastic Body, Metal Tip Insertion & Extraction Too l After youve installed the pins on the wiring to a connector, this tool will help you set the pins correctly into the connector housing. This tool is also absolutely necessary to use for extracting a proken pin for replacement or moving a misplaced pin for relocation. Insert and extract all your connector pins & sockets with this premium tool. It will work with both standard and high-density pins. 16 AWG Blue/White ................................. P/N 11-04431.............$16.50 20 AWG Red/White .................................. P/N 11-04432.............$14.95 24-20AWG Red/White .............................. P/N 11-04433.............$12.75 22 AWG Green/White............................... P/N 11-04434.............$14.95 22-28AWG Green/White .......................... P/N 11-04435...............$6.50
537
ELECTRICAL TERMINALS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No. 11-03913 11-04837 11-03914 11-08287 11-03915 11-03916 A B 1.38 .56 1.38 .56 2.50 1.00 2.50 1.00 2.50 1.00 2.50 1.00 Dimension C D E F .06 .40 .63 .16 .06 .40 .63 .16 .06 .56 .82 .31 .06 .56 .82 .31 .06 .56 .82 .43 .06 .56 .82 .56 G .41 .41 .56 .56 .68 .82 H .76 .76 .95 .95 .95 .95 Dash No. -1S Red -1S Black -2S White -2S Black -3S White -4S White Price Each $1.16 $1.22 $1.18 $1.69 $1.18 $1.16 Excellent lacing material. Permanently flexible. Resists oxidation, impervious to petroleum products. Holds tension on knots indefinitely. Perfect for holding wire bundles, tubing, etc. Rectangular crosssection 3/32x 5/32. P/N 11-12200 ...................$0.59/Ft. Flat braided tape manufactured from 100% high tenacity, continuous filament polyester fiber. This product conforms to the requirements of MIL-T-43435B; Type II, Size 3, Finish C. The tape is uniformly impregnated with a synthetic elastomer coating to improve knot holding and tying characteristics. Ideal for spot tying. 500 yd. rolls. Width: .085 (10%); Thickness: .014 (.003); Tensile Strength: 50 Lb. (min.); Elongation: 40% (max.) Natural ..............P/N 11-02012 ..........$17.75 Black.................P/N 11-02013 ..........$19.85 Flat braided tape manufactured from 100% high tenacity, continuous filament nylon yarn. This tape is impregnated with a specially formulated microcrystalline, fungicidal wax. Conforms to the requirements of A-A-52080-B-3. Recommended for continuous lacing. 500 yd. rolls. Width: .077 (min.) / .094 (max.); Thickness: .011 (min.) / .017 (max.); Tensile Strength: 50 Lb. (min.); Wax Content: 15-32%; Elongation: 40% (max.) Natural ..............P/N 11-12170 .......... $19.50 Black.................P/N 11-12160 .......... $19.85
KOROSEAL LACING
KNIFE DISCONNECTS
Terminal & Splice Kit ...................................P/N 11-50000 ...........$99.95 Above w/15 Drawer Cabinet .......................P/N 11-50005 .........$133.95 Above w/Cabinet and 604252-1 tool ...........P/N 11-50010 .........$153.95
FOR KIT COMPONENTS VISIT www.aircraftspruce.com OR CALL OUR SALES TEAM AT: 1-877-4-SPRUCE
Protects connections with applicator brush protects electrical connections and terminals against corrosion. Ideal for battery switches, instrument panel terminations, bilge pumps and electrical connections. Dielectric, resists moisture by filling in wire nuts and butt connector ends. The water-based formula is environmentally friendly, non toxic, non-flammable, odor free, will not harden in container, and easy to clean up with water. 4oz. Bottle P/N 09-42565 .................... $10.50
538
CM WP ME HA AP LG
SEAL-ALL CONNECTORS
(MALE AND FEMALE SHELLS ONLY) SINGLE CONDUCTOR KIT
Terminal Kits (includes 6 each-male, female terminals and 12 seals). Will work with all Seal-All Shells. Note-the male terminal pin goes into the female shell. 24-22 Ga Wire MANF P/N - WHT2422............ P/N 11-06588 ........$8.95 20-18 Ga Wire MANF P/N - WHT2018............ P/N 11-06589 ........$8.95 16-14 Ga Wire MANF P/N WHT1614 .............. P/N 11-06590 ........$8.95
Heavy Duty Connector-42 amps continuous maximum current rating. For 12-10 gauge wire. Complete 2 conductor kit P/N 11-06591 ...............................$16.95
Crimp tool works with all Seal-All terminals and seals. Its compact, lowcost parallel jaw design eliminates terminal rocking. Seal-All Crimp Tool............................. P/N 11-06592 ...................$37.95
EP CS IN EL AV TO
4 CONDUCTOR KIT
Crimps Seal-All terminals and seals in one cycle. Features two double Cavities, an orientation block and a ratchet mechanism to ensure that each crimp cycle is completed. Factory calibrated to be used only with Seal-All terminals and seals. Wire range 20-14. Pro Seal-All Crimper P/N 11-06593 ..........................$134.95
4 CONDUCTOR KIT
A must have tool for working with Seal-All shells and terminals. Designed to depress Seal-All rentention barbs to allow terminal removal from shells. Seal-All Tool P/N 11-06594 .....................$8.60
5 CONDUCTOR KIT
These MS25226 series buss bars are used as replacement bars for MS27212 board assemblies.
BUSS BARS
PS BV
# of Holes 4 8 16 8 4
Price
6 CONDUCTOR KIT
MS25226-8-4
03-00135 $17.25
539
CABLE TIES
This all nylon cable tie is designed Part No. to hold cables securely. Bundling 11-04230 strength military requirements. 11-04229 11-04058 Installs in just seconds. Cat. # Length L-4-18 4 L-7-50 7 L-14-50 14 Price $0.06 $0.09 $0.28
P/N 11-03768 ........................$5.25 11-04039 ...............................$0.09 P/N 11-04230 ........................$0.06 11-04229 ...............................$0.09 P/N 11-04058 ........................$0.28
Color-coded MS25036 nylon ring w/self-insulated grip. 20% Discount on 100 Wire Range: 16-14 Cont. Wire Range: 22-18 P/N Bolt Hole Price P/N Bolt Hole Price RB14-8 8 $0.74 11-03864 4 $0.78 RB14-10 10 $0.93 11-03865 6 $0.82 RB14-14 1/4 $0.73 11-03866 8 $0.82 Wire Range: 12-10 11-03862 10 $0.86 RC10-6 6 $0.92 11-03863 1/4 $1.20 RC10-8 8 $0.67 Wire Range: 16-14 RC10-10 10 $0.89 11-04093 4 $0.60 RC10-14 1/4 $0.86 11-03869 6 $0.79 RC10-38 3/8 $0.95
Nylon Bulkhead seals are used when electrical harnesses or tubing is passed through bulkheads in pressurized and nonpressurized aircraft. Seal, Square, 1-1/8 Hole............P/N 11-04059 .............$9.50 Seal, Elliptical, 3/4 Hole .............P/N 11-04061 .............$9.50 Seal, Elliptical, 1/2 Hole .............P/N 11-04060 .............$8.50 Seal, Square, 1-3/8 Hole............P/N 11-04062 ...........$21.50
With a contoured locking head, the Cobra configuration is safer, more flexible and stronger than existing cable ties. Safer because the (often barbed) stub is now deflected into a pocket at the rear of the head. More flexible because the flat lock section curves to the bundle contour and stronger because the Cobra uses an inline geometry, eliminating the stress points of traditional cable ties. Bundles down to 3/8 diameter and meets new AS 3361 specs. Features pick-proof underside lock & all rounded edges.
Color UV Black UV Black Natural Natural UV Black UV Black Black Natural Black Natural Natural Qty. 100 1000 100 1000 100 100 Tensil 50 Lbs. 50 Lbs. 50 Lbs. 50 Lbs. 50 Lbs. 50 Lbs. 120 Lbs. 120 Lbs. 18 Lbs. 18 Lbs. 18 Lbs. Length/Width 7.5 x .178 7.5 x .178 7.5 x .178 7.5 x .178 11 14 14 x .178 14 x .178 4 x .178 4 x .178 4 x .178 Part No. 11-01883 11-01884 11-01885 11-01886 11-08033 11-08034 11-02416 11-02417 11-02464 11-02466 11-02467 Price $4.95 $44.50 $4.35 $39.85 $8.95 $9.25 $17.50 $16.25 $1.90 $1.85 $14.75
STANDARD - Kit includes: 100 low profile blk Cobra ties , the rugged
Cinch&Trim application gun and an instruction manual. Gun applies traditional as well as low profile ties. Black 7.5 Ties P/N 11-06319 ................................ $45.00 Natural 7.5 TiesP/N 11-06320 ............................. $44.95 HEAVY DUTY - Kit includes: heavy duty Cinch & Trim application gun , qty. 25 Cobra low profile 14 inch 120 lb ties blk . and an instruction manual. Gun applies traditional as well as low profile ties. Black 14 Ties P/N 11-04729 ................................ $49.85 Natural 14 TiesP/N 11-04730 .............................. $49.75
C-200 Wraps ties from 18 to 50 lbs with auto tension setting & a rugged die cast aluminum body. Applies traditional ties as well as low profile ties. P/N 11-02468 ........................... $39.75
540
BOGERT CABLES
Benefits: Starting performance improved, both hot & cold Eliminates nearly all voltage drop between battery & starter Starter current draw reduced Faster cranking, crank longer on the same battery Prolonged battery and starter life Less stress on battery & starter system Helps assure confidence in passengers Reduces the personal frustration and irritation factor Exceeds Piper Service Bulletins SB836 and SB836a Aircraft Application PA-12 PA-16 PA-18 PA-20 PA-22 PA-23-150/160 PA-23-250 PA-24-180/250 PA-24-260 PA-31T PA-24-260 PA-24-400 PA-25-235/260 PA-25-235/260 PA-28-140 PA-28-150/160 PA-28-151 PA-28-161 PA-28-180 PA-28R-180 PA-28-181 PA-28R-200 PA-28R-201 PA-28R-201T PA-28RT-201 PA-28RT-201T PA-28-201T
Contents: STC & AML Copy Sample log book entry Sample 337 sample entries Formula for figuring weight & balance, & C.G. Change Easy to follow instructions Schematic listing part numbers for all cables in the kit Flexible 1 gauge M22759, cut to length & assembled Cut to the correct length Assembled with slim-head style terminals Insulated with shrink tubing Part No. 11-15150 11-15152 11-15154 11-15156 11-15158 11-15160 11-15162 11-15164 11-15168 11-15184 11-15170 11-15172 11-15174 11-15176 11-15178 11-15180 11-15182 11-15186 11-15188 11-15190 11-00250 11-00251 11-00252 11-15192 11-00253 11-15194 11-15196 Our Price $372.95 $335.95 $524.00 $533.00 $533.00 $533.00 $559.00 $559.00 $1,095.00 $203.95 $279.95 $264.95 $257.95 $257.95 $279.95 $257.95 $422.95 $637.00 $590.00 $590.00 $251.95 $251.95 $365.95 $192.95 $477.95 $723.00 $723.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Super Cub Pacer Tripacer/Colt Apache Aztec (4&6 place) Comanche (Battery AFT) Comanche (battery fwd of firewall) Cheyenne Comanche (AFT) Comanche Pawnee Pawnee (SN25-7556153 & up) Cherokee Cherokee Warrier Warrier II Cherokee Arrow Archer II Arrow II Arrow III Turbo Arrow III Arrow IV Turbo Arrow IV Turbo Dakota
Part No. Our Price Aircraft Application 11-00247 $226.95 PA-28-235 Cherokee 11-00248 $129.95 PA-28-236 Dakota 11-15102 $250.95 PA-30 Twin Comanche 11-15104 $179.95 PA-31-300 Navajo 11-15106 $179.95 PA-31-310 Navajo 11-15108 $556.00 PA31-325 Navajo 11-15110 $535.00 PA-31-350 Navajo 11-15112 $332.95 PA-31P Navajo 11-15114 $229.95 PA-31T1 Cheyenne I 11-15166 $1,095.00 PA-32R-301T --------------11-15116 $226.95 PA-32-260/300 Cherokee Six 11-15118 $305.95 PA-32R-300 Lance 11-15120 $309.95 PA-32RT-300 Lance 11-15122 $306.95 PA-32RT-300T Lance 11-15124 $289.00 PA-32-301 --------------11-15126 $337.95 PA-32R-301 --------------11-15128 $301.95 PA-32-301T Turbo Saratoga 11-15130 $309.95 PA-34-200 Seneca I 11-15132 $336.95 PA-34-200T Seneca II 11-15134 $337.95 PA-34-220T Seneca III 11-15136 $337.95 PA-36-285 11-15138 $336.95 PA-36-300 11-15140 $337.95 PA-36-375 11-15142 $330.95 PA-38-112 Tomahawk 11-15144 $271.95 PA-39 C/R Seminole 11-15146 $330.95 PA-44-180 11-15148 $330.95 PA-44-180T Turbo Seminole
541
The FPS-Plus is a full service, automatic, flap positioning system. This system operates similar to the Cessna type flap systems that many pilots were trained in. The pilot can easily go from one flap position to another with one quick press of the flap button. All flap stop positions (from 0 to 10, your choice) are easily, user programmable. This system is also fairly simple to retrofit it to your already flying aircraft. The Plus feature of this system, allows you to program an elevator trim position for each flap position. Your elevator trim will be automatically adjusted, for every different flap setting that you choose. NO more manual tweaking of the elevator trim is needed for every different flight configuration. The pilot can now pay more attention to the actual flying the aircraft, rather than tweaking the correct amount of elevator trim for every different flight configuration. Flying is made much more enjoyable. If you desire to retract the flaps fully, all you have to do, is press the flap up button for more than 1 second. The flaps will be automatically retracted to their full up position. The elevator trim is also automatically adjusted to your cruise trim position. Features: Full Automatic Flap Positioning with or without Automatic Elevator Trim Compensation Step and Proportional Modes Designed for +12v and +24v Systems Compatible with Most Motors and Indicators Setup is Fully User Programmable No Limit Switches to Install Specifications: The system will operate on +12Vdc or +24Vdc systems. Maximum amperage for each motor, 10A. Dimensions (overall) 3 x 5.75 x 1.25 Footprint 3 x 5.75 Mounting 2 holes in bottom flanges, 0.156 dia, 5.375 apart Weight < 4oz. FPS-Plus Reflex Operation -All features of this system are exactly the same as our FPS-Plus. The exception is, when you press the Flap Up Button for more than a second, it returns the flaps to the zero degree position, not full up. This is an advantage when initiating a go-around and touch and goes. It is also an advantage when your flaps are in any down position, and you want to return the flaps to the take-off position. FPS-PLUS with Elev. Trim ..........................P/N 11-02980 .........$269.00 FPS-PLUS without Elev. Trim .....................P/N 11-02981 .........$189.00 FPS - PLUS REFLEX..................................P/N 11-06440 .........$285.99
FLAP LINEAR ACTUATOR AS USED ON LANCAIR ES, LANCAIR 300 & 360
The K-Sun LABELShop BEE3+ is the professionals choice for heat-shrink tube identification and general custom labeling of wires, cables, panels, terminals, face plates, tools and equipment. The BEE3+ offers 10 different heat-shrink tube sizes and colors! Includes: K-Sun LABELShop BEE3+ Printer with Rubber Base Bumper Guard AC or DC Adapter Black hard plastic case (1)1/2 black on white tape (1)1/2 black on white heat-shrink tube cartridge Nylon wrist strap 6 AA Batteries Tape liner cutter tool Owners manual Features and Functions 4 Heat-Shrink Tube Sizes, 3 Color Combinations 3-Year FREE Printer Warranty Automatic Tape and Heat-Shrink Tube Cutter Keyboard: 67 Key QWERTY-Compatible Keyboard LCD Display: 12 Characters, 2-Lines Dot Matrix Standard LCD Print Preview: Shows Label Design and Type Style Print Speed: All Tapes Print 6mm Per Second or 2.36 Per Second Power: Runs on Batteries: 6 AA, AC Power Adapter: 115-240V Complies with California Energy Reduction Requirements and Power Management: Automatic Power Off Specifications Printer Dimensions: 7.4(wide) x 2.3(high) x 8.8(deep). Printer Weight: 1.23 Lbs. Printer Construction: High Impact Plastic with Rubber Base Guard. P/N 11-10505 ...................... $249.95
The FL1 (FL1-24) ACTUATOR offers a unique standard of performance, durability and reliability. The compact design incorporates wellproven part, like the high efficiency ball screw, a sturdy gear box assembly and fitted with compact high quality DC motor. DC motors are available in both 12 & 24 volt. All to give the best performance with unsurpassed operational life. The actuator is self-locking within the dynamic load range. The actuator is manufactured with the capacity of 1500 N maximum dynamic load and 2200 N is static. The stroke is 150 mm and with speed of 10-15 mm per second. 12 volt actuator ...................... P/N 05-66223 ..............................$987.00 24 volt actuator ...................... P/N 05-66224 ..............................$968.50 The FL2 LIMIT SWITCH and CONTROLLING UNIT makes it possible to set the actuator for the desires stroke length. It also protects the actuator from running against the mechanical end stops, thereby avoiding damage. It is durable and can be used in most environments. It includes the aluminum profile tube, in which is mounted the protection tube of the actuator. Two limit switch units are attached to the profile tube and can be adjusted to any position. The magnet rod is attached to the end of the adjustment tube and runs in a groove in the profile tube. When the magnet, which is attached to the free end of the rod, approaches the switch unit, the latter is activated. The switches are connected to the control unit, from which the relays disconnect the power to the motor. Dimensions: Overall Length: 210 mm, Extended 360 mm. Width: 86 mm, Motor Diameter: 140mm. P/N 05-66225 ...................... $215.50 FL1A CLEVIS ATTACHMENT Galvanized clevis head and journal fitting with a quick coupling. It allows simple and rapid attachment of actuator P/N 05-66226 ........................ $29.85
542
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
An approved anti-collision strobe light system must project light 360 around the aircrafts vertical axis. One or more strobe lights can be used.
An approved anti-collision strobe light system must project light + or - 30 above and below the horizontal plane of the aircraft. One or more strobe lights can be used. The + or - 75 projected light is required since July 18, 1977.
INSTALLATION LOCATIONS
LOCATIONS ON THE AIRCRAFT FOR ANTI-COLLISION STROBE LIGHTS, TO COMPLY TO THE LIGHT PATTERN REQUIREMENTS
ENCLOSED WING TIP Enclosed wing tip anti-collision strobe lights, require a third strobe light on the tail or vertical fin, to fill in the required light envelope. This is an approved anti-collision system.
FUSELAGE In a fuselage mounted anticollision strobe light system, a minimum of two strobe lights are necessary to get the required vertical coverage. This is an approved anti-collision system.
For strobe system recommendations for certified aircraft and for Whelen/ Aeroflash/ Grimes/ Cessna cross reference lists please visit our website
WWW.AIRCRAFTSPRUCE.COM
543
MODEL 90340 SERIES STROBE ANTI-COLLISION/LED POSITION LIGHT ASSEMBLY (FOR COMPOSITE WINGTIP STRUCTURE) - Same as
90340 series with addition of 3 feet of braided bonded protection. SPECIFICATIONS: LED Navigation Light Power Consumption: 0.5 amps @ 14 VDC, 0.25 amps @ 28 VDC Weight: 0.60 lbs. (272gm) 14 VDC, 0.65 lbs. (295gm) 28 VDC Exposed Height: 2.70 (69mm) LED Colors: Aviation Red, Aviation Green & Aviation White 1.1 lbs. (499gm) Lens: Clear RFI coated glass: strobe, Clear Polycarbonate: Navigation Lights
Model # Approvals 9034001 FAA TSO-C96a/TSO-C30c Typ II & III 9034002 FAA TSO-C96a/TSO-C30c Typ I & III 9034003 FAA TSO-C96a/TSO-C30c Typ II & III 9034004 FAA TSO-C96a/TSO-C30c Typ I & III 9037501 FAA TSO-C96a/TSO-C30c Typ II & III 9037502 FAA TSO-C96a/TSO-C30c Typ I & III Description Pos Grn, 14V Pos red, 14V Pos Grn, 28V Pos red, 28V Pos Grn, 28V Pos red, 28V Part No. 11-05625 11-05626 11-05627 11-05628 11-06598 11-06599 Price $325.95 $325.95 $299.95 $325.95 $408.95 $469.95
MODEL A600 PG/PR SERIES - A600 PG/PR series wing tip anti-collision, forward position and tail position lights, all in one compact unit. Tail position light eliminates the need for a tail mounted position light. Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and the taillight lamp is 25 watts. SPECIFICATIONS: Weight: 0.8 lbs. (363gm) Position Lamps Power Consumption: 4 amps @ 14 VDC; 2 amps @ 28 VDC Exposed Height: 2.4 (61mm) Length: 5.63 (143mm) Width: 1.7 (43mm)
Model # A600PG14 A600PG28 A600PR14 A600PR28 A600PGD1 A600PGD2 A600PRD1 A600PRD2 9000612 9000613 Description Pos Grn, 14V Pos Grn, 28V Pos red, 14V Pos red, 28V Pos green, 14V, FAA TSO-C30b / FAA/PMA radio-shielded Pos Grn, 28V, FAA TSO-C30b / FAA/PMA radio-shielded Pos red, 14V, FAA TSO-C30b / FAA/PMA radio-shielded Pos red, 28 V, FAA TSO-C30b / FAA/PMA radio-shielded FAA TSO-C30b used on Cirrus Pos green, 28V, radio-shielded, Pos red, 28V, FAA TSO-C30b used on Cirrus radio-shielded, Approvals FAA TSO-C30b / FAA/PMA FAA TSO-C30b / FAA/PMA FAA TSO-C30b / FAA/PMA FAA TSO-C30b / FAA/PMA Part No. 11-03220 11-03245 11-03221 11-03246 Price $268.95 $267.95 $268.95 $268.95
11-03636 $316.95 11-03732 $310.95 11-03638 $322.95 11-06335 $322.95 11-07602 $269.95 11-07603 $240.95
MODEL 71110 SERIES STROBE ANTI-COLLISION/LED POSITION LIGHT ASSEMBLY - 71110 series is a wing
tip mounted strobe anti-collision/position light assembly utilizing LED's for the forward position lights. The LED's provide a significant reduction in current draw over conventional position light bulbs. The strobe light lens assembly is radio shielded for maximum EMI/RFI protection. Direct replacement (exact footprint) for the Whelen Model A650PG/PR series without replacing the current strobe power supply. Navigation light portion is wired with flying leads. SPECIFICATIONS: LED Colors: Aviation Red, Aviation Green LED Navigation Light Power Consumption: 0.25 amps @ 14 VDC or 28 VDC Weight: 0.45 lbs. (204gm) 14 VDC, 0.50 lbs. (227gm) 28 VDC Exposed Height: 2.70 (69mm) Lens: Clear RFI coated glass: strobe, Clear Polycarbonate: Navigation Lights
Model # Approvals 7111001 FAA TSO-C96a / TSO-C30c Type II 7111002 FAA TSO-C96a / TSO-C30c Type I 7111003 FAA TSO-C96a / TSO-C30c Type II 7111004 FAA TSO-C96a / TSO-C30c Type I Description Pos Grn, 14 V Pos red, 14 V Pos Grn, 28 V Pos red, 28 V Part # 11-05630 11-05633 11-05635 11-05636 Price $293.50 $293.50 $293.50 $293.00
NOTE: All non-FAA approved Whelens parts are signified by a () in the approval column. Parts without FAA approval may still be purchased, however, installation of these parts on U. S. Type Certificated products may require additional FAA approvals.
544
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MODEL 70946 SERIES - A combination LED forward position/strobe lights designed to replace the existing combination nav/strobe lights typically seen mounted on most general aviation and helicopter applications (ref Whelen A650PG/PR Series). (28VDC Only). Green .......................P/N 11-05009 ..........$495.00 Red ..........................P/N 11-05010 ..........$495.00 MODEL 70821 SERIES - A remote streamlined strobe light assembly. Easily mounted on the wing tip for anti-collision or on the vertical fin for ground recognition. It is recommended for the wing tips on Cessna single engine aircraft 1970-71. It can be added as a low profile ground recognition light when mounted on the vertical fin or fuselage. A mounting adapter plate facilitates mounting. SPECIFICATIONS: Weight: 0.3 lbs. (136gm) Exposed Height: 1.8 (46mm) Length: 3.5 (89mm) Width: 1.8 (46mm)
Model # 7082100 7082101 7082103 Approvals Description Standard unit, clear lens Radio-shielded, clear lens Radio-shielded, red lens Part No. 11-03287 11-70821-01 11-70821-03 Price $175.95 $228.95 $319.95
MODEL A470A SERIES - A470A series remote strobe light assembly is compatible with all Whelen power supplies. It can be installed on the fuselage or the vertical fin. The unique polycarbonate optic lens and reflector design, re-directs stray light rays into the horizontal plane to provide the maximum 360 of uniform light coverage possible. Available in three different lens colors, aviation red, aviation white and split aviation red/white. Available in radio-shielded configurations. All assemblies require either the model H102 or H103 mounting adapter. SPECIFICATIONS: Weight: 0.3 lbs. (136gm) Exposed Height: 3.75 (95mm) Diameter: 2.5 (64mm)
Model # Approvals Description Part No. Price A470AR FAA/PMA Standard assembly, red lens 11-03273 $88.50 A470AW FAA/PMA Standard assembly, white lens 11-03277 $94.50 A470AS FAA/PMA Std assy, split red/white lens 11-03259 $88.50 A470ADR FAA/PMA Radio-shielded asy, red lens 11-03714 $166.95 A470ADW FAA/PMA Radio-shielded assy, white lens 11-03291 $234.95 A470ADS FAA/PMA Radio-shielded assy, split red/white lens 11-04976 $164.95
MODEL 50626 SERIES STROBE TUBE ASSEMBLY - 50626 series strobe tube assemblies are used with the following model numbers listed in chart below:
Model # 5062600 5062601 5062602 5062603 Description 6 6 w/Grom 12.5 w/Grom 2 w/Grom Used on Model 9011102 Model 9034000 - 07, 20, 21 Model 7111001 - 04 Model 9034008, 09 Model 9037501, 02 Part No. 11-07681 11-07682 11-07683 11-07685 Price $71.50 $71.50 $71.50 $71.50
MODELS A610 & A612 - A610 flash tube and A612 glass
lens are used for installing wing tip strobes in single engine Cessnas 1972 and later. The existing position light retainer is modified to accommodate the lens, and the flash tube is mounted directly behind. The unique magnifying design of the A612 lens increases the light intensity by two to three times in the horizontal plane. These items may be used for custom instalA612 lations or as spare parts for existing light assemblies. The A612 lens is available in Aviation Red and an RFI coated version. Lenses meet material requirements of MIL-C-7989B Class B. SPECIFICATIONS: Drawing Number A612: 90005 A610 Flash Tube Weight: 0.09 lbs. (41gm) A612 Lens Weight: 0.08 lbs. (36gm) A610
Model # Approvals A610 FAA/PMA A610M FAA/PMA 5027601 FAA/PMA 5027602 FAA/PMA A612 FAA/PMA A612D A612DR Description Standard unit, 6 leads Molex connector, 6 leads 14 leads 12.5 leads Standard clear lens Radio-shielded, clear lens Radio-shielded, red lens Part No. 11-03213 11-03734 11-07611 11-07612 11-03222 11-03735 11-07614 Price $72.85 $75.25 $66.75 $68.50 $31.75 $87.90 $257.95
MODELS H102 & H103 - Designed for the model A470A or model A450 series remote strobe lighthead assemblies. The model H102 allows flush mounting of the lighthead to the skin of the fuselage or the vertical stabilizer on later model Cessna Single engines. The H103 is designed for strobe assemblies to be installed in the standard 3-3/4 (95mm) dia. H103 rotating beacon mounting hole. Model # Approvals Description Part No. Price H102 FAA/PMA Flush mount adapter 11-03243 $11.75 H103 Rotating beacon mount adapter 11-03284 $45.75 MODEL A450 SERIES - A450 series remote strobe light assembly is compatible with all Whelen power supplies. It can be installed on the fuselage or the vertical fin. The Pyrex Glass lens (clear only) makes the assembly suitable for use in severe vibration, chemical and moisture conditions (i.e. agricultural aircraft). Requires either the model H102 or model H103 mounting adapter. SPECIFICATIONS: Weight: 0.3 lbs. (136gm) Exposed Height: 2.25 (57mm) Diameter: 2.5 (64mm) Model # Approvals Description Part No. Prices A450 FAA/PMA Standard assembly, clear lens 11-03280 $183.95 SA418-1 Gasket for A450 11-03690 $8.75
H102
MODEL 90358 SERIES SELF-CONTAINED LED ANTI-COLLISION/ LED POSITION LIGHT ASSEMBLY - (For Fixed
Wing, TSO-C96a Class II (400 ecp) 90358 series is a selfcontained all LED wing tip mounted anti-collision/position light assembly utilizing LEDs for both the anti-collision, forward & tail position lights, eliminating the need for a tail mounted position light. The LEDs provide a significant reduction in current draw over conventional position light bulbs, and strobe power supplies. The all inclusive LED design virtually eliminates EMI/RFI interference. All current source and flasher circuitry is contained within the attached flasher box. SPECIFICATIONS: LED Navigation Light Power Consumption: 0.25 amps @ 28 VDC EACH LED Anti-Collision Light Power Consumption: 0.5 amps @ 28 VDC LED Colors: Aviation Red, Aviation Green & Aviation White Weight: 1.3 lbs. (590gm) Exposed Height: 2.80 (71mm) Exposed Width: 2.64 (67mm) Exposed Length: 7.29 (185mm) Depth: 3.00 (76mm) Lens: Clear Hard Coated Polycarbonate
Model # Approvals Description Part No. Price 9035801 FAA TSO-C96a/TSO-C30c Typ II & III Pos Grn, 28V 11-06170 $1,157.95 9035802 FAA TSO-C96a/TSO-C30c Typ I & III Pos red, 28V 11-06171 $1,080.00
545
MODEL 71080 SERIES LED BEACON FOR ROTORCRAFT, (150 EFF. CD) (14 VDC & 28 VDC) - 71080 series LED
beacons are FAA TSO compliant self-contained LED anti-collision lights (Ref. Class I - 150 effective candlepower). They are designed to replace a range of products. Refer to models and descriptions below. ELECTRICAL: Models ending: 8001, 8004, 8005, 8014, 8015, 8020, 8051, 8055: 12 Flying Leads. Models ending: 8007, 8017, 8008, 8018: MS3102R10SL-3P Connector MECHANICAL: Models: 8004, 8014, 8008, 8018are designed to replace existing beacons utilizing a 5-Hole 7108051 mounting pattern on a 4.656 diameter bolt circle (Whelen 70285 series/7090501 series or 70900 with A440 adapter). Models: 8005, 8015, 8007, 8017are 3 opening designed to fit inside an A440 mounting adapter, mounting holes to fit in place of rotating beacons, Whelen Model HRCFA, or 7090004, -05 series LED beacons SPECIFICATIONS: Current: 0.87 amps average, 3.0 amps peak Weight: 0.65 lbs. (295gm) (8001 & 8051) Lens: Clear polycarbonate Dimensions: 2.6 (66mm) diameter, exposed height, 3.74 (95mm) (8001 & 8051)
Model # 7108001 7108001 7108051 7108004 7108014 Approvals Description LED red, 28 VDC Rotocraft (no adapter) Part # Price
MODEL 90520 SERIES LED FLASHING BEACON (RED & WHITE LEDS) - 90520 series LED beacons are FAA TSO
compliant self-contained LED anti-collision lights (Ref. Class I - 100 effective candlepower). They are designed to replace strobe lightheads as small as the A470A with available models to replace HR self-contained beacons (HRCFA) or our legacy 70900 LED beacon. Mounting plate included with as9052051 sembly. Refer to models and descriptions below. ELECTRICAL: Models ending: 2001, 2004, 2005, 2014, 2015, 2051, 2055: 12 Flying Leads Models ending: 2007, 2017, 2008, 2018: MS3102R10SL-3P Connector MECHANICAL: Models: 2004, 2014, 2008, 2018 are designed to replace existing beacons utilizing a 5 Hole mounting pattern on 4.656 diameter bolt circle (Whelen 70285 series / 7090501 series or 70900 with A440 adapter). Models: 2005, 2015, 2007, 2017 are 3 opening designed to fit inside an A440 mounting adapter, mounting holes to fit in place of rotating beacons, Whelen model HRCFA, or 7090004, -05 series LED beacons SPECIFICATIONS: Current: 0.67 amps Average, 3.0 amps Peak Weight: 0.65 lbs. (295gm) (-01 & -51) Lens: Clear polycarbonate Dimensions: 2.6 (66mm) Diameter, Exposed Height, 3.74 (95mm) (-01 & 51)
Model # Approvals Pend. Description Part No. 9052001 LED red/white, 28 VDC & mount 11-07615 LED red/white, 14 VDC & mount 11-07616 9052051 LED red/white, 28 VDC & 5 hole mount 11-07617 9052004 9052014 9052005 9052055 FAA TSO-C96a Class I 9052015 9052007 9052017 9052008 9052018
LED red/white, 28 VDC & 5 lower mount LED red/white, 28 VDC, 3.75 adapter LED Red/White, 14 VDC 3.75 adapter same as 9052005, lower mount LED red/white, 28 VDC, 3.75 adapter same as 9052007, lower mount LED red/white, 28 VDC & 5 hole mount LED red/white, 28 VDC & 5 lower mount
11-06173 $547.00
LED red, 28 VDC & Mt. 11-06174 $567.00 LED red, 14 VDC & Mt. 11-07656 $781.00 LED red, 28 VDC & 11-07687 $643.00 5-Hole mount Same as 8004, lower Mt 11-07688 $643.00 11-09909 $620.00 11-07689 $665.00 11-07690 $665.00 11-07691 $665.00 11-07692 $665.00 11-07693 $665.00 11-07694 $665.00
LED Red, 14 VDC, 3.75 7108055 FAA TSO-C96a adapter Class I (150 ecp) LED red, 28 VDC, 3.75 7108005 adapter 7108015 same as 8005, lower Mt LED red, 28 VDC, 3.75 7108007 adapter 7108017 same as 8007, lower Mt. LED red, 28 VDC & 5 7108008 hole mount 7108018 same as 8008, lower Mt.
11-07618 $543.00 11-07619 $618.00 11-09908 $618.00 11-07620 $597.00 11-07621 $561.00 11-07622 $561.00 11-07623 $543.00 11-07624 $543.00
MODEL 70285 SERIES - 70285 series self-contained CometFlash strobe anti-collision light. It utilizes the same lens/reflector and strobe tube as the model HRCFA, however, its vibration resistant, heavy-duty construction is specially designed for helicopter applications. It has a fixed mounting adapter and an MS input connector. Available in three different lens colors, Aviation red, aviation white, and split aviation red/white and in radio-shielded configurations. FAA approved as a direct replacement for any rotating beacon that uses a 3-3/4 dia. mounting hole. Unit will operate between 10 to 30 VDC. SPECIFICATIONS: Weight: 1.5 lbs. (680gm) Height: 8.0 (203mm) Diameter: 3.7 (94mm) Power Consumption: 3.2 amps @ 14 VDC, 1.6 amps @ 28 VDC
Model # Approvals 7028521 7028522 7028523 7028524 7028525 7028526 7028527 7028528 Description Shielded, red lens Shielded, red lens with .31 mask White lens Split red/white lens Red lens Shielded, red lens with .29 mask White lens, with lock wire Shielded, split red/white lens Part # 70285-1 11-07696 70285-3 70285-24 70285-5 70285-6 11-07698 70285-2 Price $666.00 $669.00 $640.00 $528.00 $640.00 $662.00 $545.00 $646.00
MODEL HRCFA SERIES - HRCFA series is a self-contained CometFlash strobe anti-collision light. The unique polycarbonate optic lens and reflector design re-directs stray light rays into the horizontal plane to provide maximum 360 of uniform light coverage. Available in three different lens colors, aviation red, aviation white and split aviation red/white and in radio-shielded configurations. FAA approved as a direct replacement for any rotating beacon that uses a 3-3/4 (95mm) dia. mounting hole. Can be installed in the vertical fin or the fuselage. Fuselage installation requires the A440 mounting adapter. Operates between 10 to 30 VDC. SPECIFICATIONS: Weight: 1.5 lbs. (680gm) Height: 7.25 (184mm) Diameter: 3.7 (94mm) Power Consumption: 3.2 amps @ 14 VDC, 1.6 amps @ 28 VDC Model # Approvals Description Part # Price HRCFAR FAA/PMA Std. assy, red lens 11-16214 $364.95 HRCFAW FAA/PMA Std. assy, white lens 11-16212 $364.95 HRCFAS FAA/PMA Std assy, split red/white 11-16216 $364.95 HRCFADR FAA/PMA Radio-shielded, red lens 11-07625 $437.95 HRCFADW FAA/PMA Radio-shielded, white lens 11-07626 $437.95 HRCFADS FAA/PMA Radio-shielded, split red/white 11-07627 $437.00
90028 series wing tip strobe light used on Beech aircraft with commonality wing tip 1974 & later. It is a direct replacement for 30-0467-( ), 30-1331-( ) and the 30-1467-( ) series. NOTE: Do not use with Cannon plug. Light assembly, 45 mounting bracket. Weight: 0.4 lbs. (181gm) Exposed Height: 1.87 (48mm) Length: 4.37 (111mm) Depth: 2.25 (57mm) P/N 11-00712 ......................... $165.95
NOTE: All non-FAA approved Whelen parts are signified by a () in the approval column. Parts without FAA approval may still be purchased, however, installation of these parts on U. S. Type Certificated products may require additional FAA approvals.
546
MODEL 90088 SERIES LED ANTI-COLLISION LIGHT - 90088 series is a self-contained LED anticollision beacon. It's solid-state circuitry and LED light source obsolete the "old style" mechanical oscillating beacons as well as the Whelen 90044 series quartz halogen flashing beacons. Benefits include no moving parts, no EMI/RFI, no inrush current spikes and crisp on/off cycles. There are several models available to provide compatibility with existing mounting patterns and profiles, thus eliminating the need to alter the aircraft. SPECIFICATIONS: Power Consumption: 0.45 amps @ 28 VDC LED Color: Aviation RED Weight: 1.8 lbs (816gm) (unless otherwise noted) Exposed Height: 2.70" (69mm) Lens Color: Clear glass Replaces: Whelen: 90044 Series and Grimes: G9950-( ), 40-0100-( ), 30-2140-( ), 40-0117-( ), 40-0127-( ), 30-2647-( ) To determine the model required for replacement, the following information is needed: upper or lower mounting, number of mounting holes (5 or 8), weight & position installed. Beacons installed on the rudder. Top replacement on Gulfstream II & III require a 9008812 in conjunction with the optional 16 hole mounting plate, P/N 06-170618-00.
Model # 9008811 9008812 9008813 9008814 9008815 9008816 9008817 9008818 9008819 Approvals FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III FAA TSO-C96a Class III Description Lower, 5 hole, standard assembly, cable pigtail Upper, 5 hole, standard assembly, cable pigtail Upper, 5 hole, 2.25 lbs. rudder mount (Citations) Upper, 5 hole, 2.25 lbs. cable pigtail (Beech Barons) Lower, 5 hole, (MS27508E10A5P connector) Upper, 5 hole, (MS27508E10A5P connector) Lower, 5 hole, 2 drain holes (Hawker 800) Upper, 8 hole, 1.9 lbs, cable pigtail Lower, 8 hole, 1.9 lbs, cable pigtail Part # Price 11-05004 $1,039.00 11-05005 $1,039.00 11-07629 $1,055.00 11-07630 $1,096.00 11-07631 $1,055.00 11-07632 $1,055.00 11-07633 $1,054.00 11-07634 $1,054.00 11-07635 $1,096.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model # A440
11-03238 Model # 7050900 7050901 7050902 7050903 7050904 7050905 7050907 50519001
MODEL 90044 SERIES - 90044 series self-contained, 150 watt, quartz halogen flashing anti-collision light. Factory installed on Lear 31, Falcon 900 and Cessna Citation X. It is also a direct replacement for oscillating beacons on most corporate aircraft. 5-Hole SPECIFICATIONS: Weight: 1.6 lbs. (726gm) to 2.5 lbs. (1134gm) Height: 5.5 (140mm) Power Consumption: 3.25 amps @ 28 VDC Replaces: G9950-( ), 40-0100-( ), 30-2140-( ), 400117-( ), 40-0127-( ), 30-2647-( ) To determine model required for replacement, the following information is needed: Lens color (red or white), upper or lower mounting location, number of mounting holes (5, 8, or 9), weight and position installed. Beacons installed on the rudder.Top replacement on GII and GIII require 9004401 or 9004402 in conjunction with the 16 hole mounting plate, P/N 06-170618-00.
Model # 9004401 9004402 9004403 9004404 9004417 9004418 9004419 9004420 Remarks Std. Assy Std. Assy Std. Assy Std. Assy Std. Assy Std. Assy Std. Assy Std. Assy 2.50 lbs. 9004435 FAA TSO-C96a (Westwind) 2.25 lbs., cable pigtail 9004457 FAA TSO-C96a (Beech Barons) Approvals FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a FAA TSO-C96a Lens Mount Base red upper 5 hole white upper 5 hole red lower 5 hole white lower 5 hole red upper 8 hole white upper 8 hole red lower 8 hole white lower 8 hole Part # 11-03293 90044-02 90044-03 90044-04 90064-17 90044-18 90044-19 90044-20 Price $832.00 $832.00 $832.00 $832.00 $832.00 $832.00 $832.00 $832.00
MODEL 90350 SERIES SELF-CONTAINED LED GROUND RECOGNITION LIGHT ASSEMBLY - 90350 series is a self-contained
all LED ground recognition light assembly. The design is intended to provide a solution to the needs for ground recognition lighting on a wide variety of aircraft. All current source and flasher circuitry is contained within the base plate. Unit is flush mounted to aircraft surface eliminating the need for large cutouts in the aircraft structure. Item ships with flying leads. SPECIFICATIONS: Power Consumption: 0.28 amps Avg. @ 28 VDC LED Colors: Aviation Red Lens: Aviation Red, Polycarbonate Weight: 0.2 lbs. (91gm) Exposed Height: 1.48 (38mm) Exposed Width: 1.64 (42mm) Exposed Length: 4.61 (117mm) Model # Approvals Description Part # Price 9035000 Red, 28 VDC 11-06172 $279.95 MODEL 71055 SERIES LED BEACON - 71055 series beacons are FAA TSO compliant self-contained LED anti-collision lights. They are designed to replace existing quartz halogen flasher beacons installed as original equipment on single engine Cessnas from 1967 and later (contact factory for details). They can also replace remote mounted strobe lights (ref. Whelen A470 series) allowing for removal of the strobe power supply. Internal mounting plate provided with choice of mounting holes to retrofit most existing mounting patterns. STC SA615EA approved. SPECIFICATIONS: Power Consumption: 01-0771055-00 - 1.2 amps Avg. / 11-04542 - 0.6 amps Avg. LED Color: Aviation RED Lens: Clear Polycarbonate Weight: 0.52 lbs. (236gm) Exposed Height: 3.09 (78mm) Exposed Diameter: 2.60 (66mm) Model # Approvals Description Part # Price FAA TSO-C96a LED beacon 14 7105500 11-04541 $494.00 Class III VDC, red FAA TSO-C96a LED beacon 28 7105501 11-04542 $487.00 Class III VDC, red 38Replacemnt Lens 025088511-10407 $7.65 Gasket 00
NOTE: All non-FAA approved whelwn parts are signified by a () in the approval column. Parts without FAA approval may still be purchased, however, installation of these parts on U. S. Type Certificated products may require additional FAA approvals.
red upper 8 hole 90044-35 $832.00 red upper 5 hole 11-01968 $895.00
MODEL 90033 SERIES SELF-CONTAINED LIGHT ASSEMBLIES - 90033 series self-contained, 150
watt, quartz halogen flashing anti-collision light which is factory installed on Beechcraft. It is also a direct replacement for oscillating beacons on most corporate aircraft. SPECIFICATIONS: Weight: 0.6 lbs.(272gm) to 0.9 lbs. (408gm) Height: 4.4 (112mm) Power Consumption: 5.5 amps @ 28 VDC
Lens Mount Base red Part # Price lower 2 hole 90033-1 $550.00
2-Hole
Model # Approvals Remarks FAA TSO- 18 cable, no 900331 C96a connector FAA TSO- 18 cable, no 900332 C96a connector
FOR ADDITIONAL 90044 AND 90033 SERIES LIGHTS PLEASE CALL OR VISIT OUR WEBSITE AT WWW.AIRCRAFT SPRUCE.COM
547
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ries are fully FAA TSO compliant forward position lights. LED's provide a significant reduction in electrical current draw over conventional light bulbs. The 71105 is our latest design and lowest priced forward position light. Direct replacement for Whelen Model W1285 series (Version STC'd on Learjet Aircraft). SPECIFICATIONS: LED Navigation Light Power Consumption: 0.25 amps @ 14 VDC or 28 VDC LED Colors: Aviation Red, Aviation Green Weight: 0.20 lbs. (91gm) 14 VDC, 0.25 lbs. (113gm) 28 VDC Exposed Height: 2.70 (69mm) Lens: Clear Polycarbonate Model # Approvals Description Part # Price 7110501 FAA TSO-C30c Type II Position grn, 14V 11-05629 $205.95 7110502 FAA TSO-C30c Type I Position red, 14V 11-05631 $205.95 7110503 FAA TSO-C30c Type II Position grn, 28V 11-05632 $187.95 7110504 FAA TSO-C30c Type I Position red, 28V 11-05634 $189.95
MODEL 71015 SERIES LED FORWARD POSITION LIGHTS - 71015 series are FAA TSO
compliant forward position lights. They are compatible with the Whelen W1250 position light mounting as well as any other make that uses the same mounting pattern. SPECIFICATIONS: Power Consumption: 0.3 amps @ 28 VDC LED Color: Aviation Red; and Aviation Green Weight: 0.2 lbs. (91gm) Exposed Height: 1.33" (34mm) Length: 2.41" (61mm) Model # Approvals Description Part # Price 7101501 FAA TSO-C30c Type II Grn position, 28V 11-05011 $274.95 7101502 FAA TSO-C30c Type I Red position, 28V 11-05012 $270.00
MODEL 71011 SERIES LED TAIL POSITION LIGHTS - 71011 series are LED tail position
lights designed to replace the existing old style tail lights typically seen mounted on most general aviation, corporate, and helicopter applications. They have all the advantages associated with using LEDs as a light source, improved reliability, and reduced operating costs. Now offered with a 14 Volt version. SPECIFICATIONS: Power Consumption: 0.5 amps @ 14 VDC; 0.3 amps @ 28 VDC LED Color: Aviation White Weight: 0.2 lbs. (91gm) Exposed Height: 1.36" (35mm) Mounting Hole Pattern: 1.75" (45mm) Model # 7101102 7101103 7101112 7101113 Approvals Description Part # FAA TSO-C30c Type III Vert 28V 11-05013 FAA TSO-C30c Type III Horz. 28V 11-05014 FAA TSO-C30c Type III Vert 14V 11-06325 FAA TSO-C30c Type III Horz. 14V 11-06326 Price $239.00 $249.00 $254.95 $239.95
MODEL W1250 SERIES - W1250 series wing tip position light is designed for use under a wing tip fairing. It uses a 26 watt incandescent lamp and is a direct replacement for the brand G A1815A Series. Specify 14 or 28 VDC. SPECIFICATIONS: Weight: 0.3 lbs. (136gm) Height: 1.25 (32mm) Length: 2.75 (70mm) Power Consumption: 2 amps @ 14 VDC, 1 amp @ 28 VDC Model # Approvals Description Part # Price W1250PR1 FAA TSO-C30b Type I Position red, 14 V 11-04264 $157.95 W1250PR2 FAA TSO-C30b Type I Position red, 28 V 11-03282 $157.95 W1250PG1 FAA TSO-C30b Type II Position grn, 14 V 11-04263 $98.75 W1250PG2 FAA TSO-C30b Type II Position grn, 28 V 11-03278 $157.95 MODEL A555A SERIES - A555A series tail mounted position light which uses a 25 watt halogen lamp. The suffix V or H in the part number designates the aircraft mounting screw locations in respect to the light shield. V designates vertical mounting and H indicates horizontal mounting on the aircraft. Supplied with a 2 position AMP connector. Specify 14 VDC or 28 VDC. Replaces the brand G A2064 series. SPECIFICATIONS: Exposed Height: 1.4 (36mm) Mounting Diameter: 1.06 (27mm) Power Consumption: 2 amps @ 14 VDC, 1 amp @ 28 VDC Weight: 0.1 lbs. (45gm) Model # Approvals Description Part # Price A555AV14 FAA TSO-C30b Type III Vert, 14 VDC 11-03256 $116.95 A555AV28 FAA TSO-C30b Type III Vert, 28 VDC 11-03267 $119.50 A555AH14 FAA TSO-C30b Type III Horz. , 14 VDC 11-03270 $114.95 A555AH28 FAA TSO-C30b Type III Horz. , 28 VDC 11-03275 $116.95
MODEL 70966 SERIES - 70966 series LED tail position light, is a high quality, long lasting, modern alternative to incandescent & halogen tail position lights. It offers significant technological upgrades over previous products. Utilizing LED technology, the following advantages are offered: Long Life (approx. 20,000 hours); Reduced Power Consumption (compared to alternative light sources); Shock & Vibration Resistant (no fragile filament to burn out); Light (produces bright white light) and No EMI or RFI Interference. 3 Year Warranty. SPECIFICATIONS: Exposed Height: 1.64 (42mm) Length: 2.60 (66mm) Width: 1.74 (44mm) Power Consumption: 0.3 amps @ 28 VDC Weight: 0.3 lbs. (136gm) Model # Approvals Description 28 VDC - no connectors Part # Price
11-01228 $448.95
NOTE: All non-FAA approved whelwn parts are signified by a () in the approval column. Parts without FAA approval may still be purchased, however, installation of these parts on U. S. Type Certificated products may require additional FAA approvals.
548
MODEL 90361 SERIES LED LANDING LIGHT (EXTERNAL MOUNT) PAR-36 STYLE - 90361
series is a self-contained all LED landing light assembly. The design is intended to provide a solution to the needs for a taxi & landing light on a wide variety of aircraft. All current source and electronic circuitry is contained within the housing. Unit is available in several mounting configurations to retrofit existing typical PAR-36 lighting. Outer lens allows for mounting externally on aircraft, option of diffusion lens available upon request. Item ships with flying leads. Contact your OEM for installation eligibility on your aircraft. SPECIFICATIONS: Power Consumption: 1.5 amps @ 28 VDC Weight: 1.3 lbs. (590gm) Exposed Diameter: 4.70" (119mm), Overall Depth: 2.87" (73mm) Lens: Clear Polycarbonate
Model # Approvals 9036110 9036115 9036120 9036125 Description "U" bracket mounting LED taxi, assy with spreader optic, 14V "U" bracket mounting LED taxi, assy with spreader optic, 28V Part # Price 11-06181 $632.00 11-06182 $632.00 11-06183 $632.00 11-06184 $621.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MODEL 71144 'GOOSENECK' LED LIGHT ASSEMBLY 71144 assembly features a positive off position and rheostat controlled light intensity. Models including 'side' mounted intensity control are which is designed for the S76D. 28 VDC Only. SPECIFICATIONS: Power Consumption: 0.06 amps @ 28 VDC LED Colors: Aviation White Weight: 0.46 lbs. (209gm) Black Nylon Hood: fixed in position
Model # 7114416 70190R12 70190B12 Approvals Description 16 adj map light, 28V - Wht 16 adj map light, 28V - Red 16 adj map light, 28V - Blue Part # 11-07701 11-07731 11-07732 Price $273.95 $228.95 $228.95
MODEL 71125 SERIES LED RECOGNITION LIGHT 71125 series LED recognition light is designed to provide supplemental lighting for a wide variety of aircraft applications. Provides all of the advantages of LED's as a light source, no EMI/RFI, low current draw, low heat, long life. Perfect for vibration prone areas. Item ships with flying leads. Several different beam spreads available. Designed to replace the Whelen A775 series. Version containing integrated MS connector also available. Can be used in conjunction with 71115 Flasher control assembly. Contact your OEM for installation eligibility on your aircraft. SPECIFICATIONS: Power Consumption: 0.9 amps @ 14 Volts, 0.45 amps @ 28 Volts Lens: Clear polycarbonate LED Color: Aviation White Weight: 0.3 lbs. (136gm) Overall Width: 3.25" (83mm) Overall Depth: 1.25" (32mm) Overall Height: 1.95" (50mm) Model # Approvals Description Part # Price 7112510 10 degree beam pattern, 14V 11-06164 $264.95 7112511 20 degree beam pattern, 14V 11-06165 $292.95 7112512 90 degree beam pattern, 14V 11-06166 $291.95 7112513 30 degree beam pattern, 14V 11-07702 $279.95 7112520 10 degree beam pattern, 28V 11-06167 $272.95 7112521 20 degree beam pattern, 28V 11-06168 $264.95 7112522 90 degree beam pattern, 28V 11-06169 $264.95 7112523 30 degree beam pattern, 28V 11-07703 $279.95 MODEL A775 SERIES - A775 series recognition light assembly which produces up to 22,000 beam candlepower using only a 35 watt lamp. SPECIFICATIONS: Drawing Number: 70110 Weight: 0.14 lbs. (64gm) Width: 3.25 (83mm) Height: 1.75 (44mm) Depth: 2.25 (57mm) Power Consumption: 2.5 amps @ 14 VDC, 1.25 amps @ 28 VDC Model # Approvals Description Part # Price 7011001 FAA/PMA Molex connector (Piper), 14V 11-07704 $45.65 7011002 FAA/PMA Molex connector (Piper), 28V 11-07705 $44.75 A77514 12 leads, 14 VDC 11-03741 $44.50 A77528 12 leads, 28 VDC 11-03742 $45.70
MODEL 70844 SERIES LED POST LIGHTS - The model 70844 series are LED (Light Emitting Diode) instrument post light assemblies. Designed to illuminate the instrument panel, and function as instrument mounting bolts. High quality, long lasting, modern alternative to standard incandescent post lights. Utilizing LED technology, the following advantages are offered: Long life - approximately 20,000 hours. Reduced power consumption -compared to alternative light sources Shock and vibration resistant, no fragile filament to burn out Light - produces bright white light. No EMI or RFI interference Specifications: Wt: .03 lbs. Exposed Height: 1 w/o spacer Width: 1.74 Power consumption: .02 amps @ 14 V / .02 Amps @ 28V
Model No. 7084400 7084401 7084402 7084403 Whelen P/N Description 01-0770844-00 14V, 1.0 post 01-0770844-01 14V, 1.5 post 01-0770844-02 28V, 1.0 post 01-0770844-03 28V, 1.5 post Replacement light hood Part No. 11-01215 11-01216 11-01217 11-01218 11-07775 Price $37.50 $37.65 $37.25 $37.50 $0.48
INSTALLATION CABLE KITS - Cable kits include all required connectors for hooking up the strobe light to the power supply only. Warning placards included. All cable is 16 gauge 3/C shielded. The cable diameter is .275 (7mm). Weight is .050 lbs. per linear foot. (Kits do not include switches or breakers) Model # Approvals Description Part # Price HS5 5 Cable kit 11-04204 $33.75 HT10 10 Cable kit 11-08173 $34.50 HS30 30 Cable kit 11-03285 $49.75 HD60 60 Cable kit 11-02667 $92.75 HDT390 90 Cable kit 11-02668 $109.00 HT Install kit only 11-02669 $17.95
The Model A715-1 landing light is standard equipment on new Beechcraft, and will retrofit into older aircraft, as well. Accommodates PAR 36 sealed beam lamp. Order lamp separately (#4509 - 100W, 12V; #4594 or #4613 100W, 24V; Wt. 1/2 lb. Size: 4-3/4 dia. x 6-1/2 long x 2-1/8 deep. P/N 11-03281 ................ $149.50
MODEL 71141 SERIES LED LANDING LIGHT (INTERNAL MOUNT) PAR-36 STYLE - 71141 series is a selfcontained all LED landing light assembly. The design is intended to provide a solution to the needs for a taxi & landing light on a wide variety of aircraft. All current source and electronic circuitry is contained within the housing. Unit is available in several mounting configurations to retrofit existing typical PAR-36 lighting. Unit is designed to be mounted internally behind existing lens. Item ships with flying leads. Contact your OEM for installation eligibility on your aircraft. SPECIFICATIONS: Power Consumption: 1.5 amps @ 28 VDC Weight: 1.0 lbs. (454gm) Exposed Diameter: 4.46" (113mm), Overall Depth: 1.90" (48mm) Lens: Clear Polycarbonate Model # Approvals Description Part # Price LED landing/taxing light 7114112 11-06185 $485.00 internal mount LED landing/taxing light 7114122 11-06186 $519.00 internal mount
REPLACEMENT CONNECTORS - Replacement connector kits and assemblies for cables. Model # Approvals Description A441 3 Position male with pins kit A442 3 Position male with sockets kit A444 2 Position male with pins assy A446 2 Position female with sockets assy A447 4 Position male with pins A448 4 Position female with sockets Part # 11-03211 11-03212 11-03700 11-03702 11-07706 11-07707 Part # Price $4.95 $4.95 $4.95 $4.95 $5.25 $4.80 Price
549
NO. 1 Two A600-PG/PR Wingtip Strobe Lights, (1) A413A-HDA-CF-14/28, remote mounted Power Supply (400 Effective Candles) and HD-60 Installation Kit. P/N 11-03000 (14V) ........ $1,023.00 P/N 11-03100 (28V) ... $1,023.00 NO. 2 Two A600-PG/PR Wingtip Strobe Lights, (2) A490A,TS,CF Power Supplies (400 Effective Candles) and HT Installation Kit. P/N 11-03200 (14V) ................... $1,169.00
TWO LIGHT SYSTEM (With Local Power Supplies) - (2) A650-PG/PR Wingtip Strobe Lights, (2) A490A, TS, CF, Power Supplies (400 Effective Candles) and HT Information Packet. 14V ..... P/N 11-03600 ....$1,078.00 28V ...... P/N 11-03610 $1,078.00
(Same Kit but w/A490T, CF Power Supplies below)
14V ..... P/N 11-03605 ....$928.00 28V ...... P/N 11-03615 .. $928.00 NO. 5 TWO LIGHT SYSTEM (With Remote Power Supply) - (2) A650PG/PR Wingtip Strobe Lights, (1) 413A,HDA-CF-14/28,CF remote mounted Power Supply (400 Effective Candles) & HD-60 Installation Kit. 14V ............... P/N 11-03800................................ $932.00 28V ............... P/N 11-03805................................ $926.00 NO. 6 THREE LIGHT SYSTEM (With Local Power Supplies) - Two A650-PG/PR Wingtip Strobe Lights, one A500 Tail Position/Strobe Light, (vertical) three A490A,TS,CF Power Supplies (400 Effective Candles Wingtip Strobes, 300 Effective Candles Tail Strobe) and HT Information Packet. 14V (A-500-Vert) . P/N 11-04000-14-V.. $1,538.00 14V (A-500-Hor) .. P/N 11-04000-14-H . $1,538.00 28V (A-500-Vert) . P/N 11-04000-28-V.. $1,538.00 28V (A-500-Hor) .. P/N 11-04000-28-H . $1,538.00
(Same Kit but w/A490T, CF Power Supplies below)
This compact, lightweight strobe kit is very popular with builders of a variety of todays homebuilt aircraft. Kit includes: 2-A610 flash tube assys., 2-A612 magnifying lenses, 2-A490T,CF power supplies and 1-HT installation Kit. P/N 11-00923 ........ $724.00
Kit # 11-05600
Popular with Long-EZ, Q2, Q200 builders and others using a lightweight, low amperage generator or alternator. It consists of: (2) A600-PG/PR Wingtip Strobe Lights, (1) A413A, HDS-14/28 (Single Flash 20 Joules) remote mounted Power Supply, HD-60 Installation Kit (Draws less than 4A - 14V & produces 400 effective Candles.) P/N 11-05600 ............. $1,014.00
(A-500-Vert) . P/N 11-04010-14-V.. $1,312.00 (A-500-Hor) .. P/N 11-04010-14-H . $1,312.00 (A-500-Vert) . P/N 11-04010-28-V.. $1,307.00 (A-500-Hor) .. P/N 11-04010-28-H . $1,307.00 NO. 7 THREE LIGHT SYSTEM (With Remote Power Supply) - (2) A650PG/PR Wingtip Strobe Lights, (1) A500 Tail Position/Strobe Light, (vertical) one A413A,HDA-CF-14/28 remote-mounted Power Supply (400 Effective Candles Wingtip Strobes, 330 Effective Candles Tail Strobe) & HD,T3-90 Installation Kit. 14V............... P/N 11-04400....... $1,031.00 28V............... P/N 11-04500....... $1,031.00
Designed to determine whether power supply is operating normally. Kit contains troubleshooting procedures. Also contains adapter for testing some Grimes and Hoskins strobe light systems. P/N 11-06800 ....... $128.95
550
551
WHELEN STROBES
STROBE SYSTEM PARTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Model # A402R A402W A402R/W A406 A409 A414A, HDH, CF A417-1 A421-1 A425 A426 A427 A427-M A427-4 A428 A428-C A428-D A429 A430 A435 A440 A441 A442 M441 M442 A444 M444 A445 A446 A450 A455 A457A A457A-D A465 A466A-1 A467 A469B A469D-K
Description Red Optic Lens White Optic Lens Split Red/White Optic Lens Flash Tube Assembly Clamp Ring Assembly HDH,CF Power Supply Interconnecting Cable Warning Decal Tail Strobe Lens Retainer Wingtip Strobe Lens Retainer Flash Tube Assembly Flash Tube Assembly with Molex Connector Rubber Pad Spacer Wingtip Strobe Lens Wingtip Strobe Radio Shielded Lens Wingtip Strobe Radio Shielded Lens plus A426 Retainer assy.
Part No.
Price
Model # A470-D
Description
Part No.
Price
11-03254 $27.65 11-03271 $27.75 11-03248 $32.70 11-03687 $83.75 11-03688 $11.95 11-03632 $475.95 11-03658 $1.45 11-03691 $3.90 11-03692 $18.60 11-03233 $31.85 11-03219 $78.89 11-03272 $77.25 11-03693 $7.50 11-03236 $51.75 11-03694 $78.25 11-03290 $106.95
Radio Shielded Remote Strobe Head 11-03291 $234.95 Assembly, Specify Color Strobe Head Assembly, Shielded A470-A-D-S Red/White 11-04976 $164.95 11-03714 $166.95 A470-D-R-SU Radio Shielded Remote Strobe
A490 TC CF A490 TC CF A500-V-D-14 A500-V-D-28 A500-H-D-14 A500-H-D-28 A500-VD-M-14 A500-VD-M-28 A500-HD-M-14 A500B-V-14 A500B-V-28 A500SP-28 A502 A506 A506-B A506-M A506-SP A507 A508-14 A508-28 A509 A510-14 A510-28 A512-V-28 A540 A600PG-D-14 A600PG-D-28 A600-PGD-M-28 A600-PRD-M-14 A600-PRD-M-28 A605 A606 A610 A610-M A612 A612-D A615 A616 A625 A625-D A626 A626-D A627 A628 A629 A650
14V Power Supply 28V Power Supply 14V Radio Shielded Tail Position Strobe Light Head Assy. Vertical Mount 28V Radio Shielded Tail Position Strobe Light Head Assy. Vertical Mount Radio Shielded Tail Position & Strobe Light Head Assembly Horizontal Mount Radio Shielded Tail Position & Strobe Light Head Assembly Horizontal Mount Radio Shielded Tail Position & Strobe Light Head Assembly Vertical Mount with Molex Connector Radio Shielded Tail Position & Strobe Light Head Assembly Vertical Mount with Molex Connector Radio Shielded Tail Position & Strobe Light Head Assembly Horizontal Mount with Molex Connector Tail Position & Strobe Light Head Assembly (Beech) Tail Position & Strobe Light Head Assembly (Beech) Tail Pos. & Strobe Assy. (Beech) Flash Tube & Socket Assembly Flash Tube & Socket Assembly Flash Tube & Socket Assembly Flash Tube & Socket Assembly Flash Tube & Socket Assembly Lamp Socket Assembly for A555 Halogen Lamp for A500,A555, A600 Halogen Lamp for A500,A555, A600 Lamp Shield for A500 and A555 Lamp Assembly for A500 & A555 Lamp Assembly for A500 & A555 Tail Position & Strobe Light Head Assembly (Gulfstream Commander) Long Mounting Adapter Radio Shielded Wingtip Strobe Light with Forward & Tail Position Light Assembly Radio Shielded Wingtip Strobe Light with Forward & Tail Position Light Assembly Radio Shielded Wingtip Strobe Light w/ Forward & Tail PositionLight Assembly (Molex Connector) Radio Shielded Wingtip Strobe Light w/ Forward & Tail Position Light Assembly (Molex Connector) Radio Shielded Wingtip Strobe Light w/ Forward & Tail Position Light Assembly (Molex Connector) Base Plate Assembly Retainer Flash Tube Assembly Flash Tube Assembly Magnifying Lens Radio Shielded Lens Retainer Assembly Lens for A600 Tail Light Gasket for A600 Tail Light Tail Strobe Head Radio Shielded Tail Strobe Head Assembly Retainer Lens Radio Shielded Lens Retainer Assy. Flash Tube Assembly Retainer Lens Gasket Wingtip Strobe Head Assembly
11-02661 $249.95 11-06406 $246.95 11-03721 $198.95 11-06407 $199.75 11-03717 $210.95 11-06327 $214.95 11-03722 $207.95 11-06329 $209.95 11-03719 $207.95 11-03715 $290.95 11-03716 $292.95 11-03720 $270.95 11-03723 $200.95 11-03274 $134.95 11-03724 $259.95 11-03725 $129.85 11-03726 $247.95 11-03240 $18.80 11-03216 $23.50 11-03208 $23.75 11-03727 $9.90 11-03728 $32.00 11-03266 $32.50 11-03729 $164.95 11-03730 $79.50 11-03636 $316.95 11-03732 $310.95 11-03732 $310.95 11-03638 $322.95 11-06335 $322.95 11-03733 11-03260 11-03213 11-03734 11-03222 $98.75 $25.95 $72.85 $75.25 $31.75
Wingtip Strobe Head Assembly 11-03695 $154.95 (Replaced by A650) Tail Strobe Head Assembly Flash Tube Assembly WRM-65 Mounting Adapter, forHR,DF & SA,DF AMP Connector and 3 Pins AMP Connector and 3 Sockets Molex Connector and 3 Pins for Piper Installation Molex Connector and 3 Sockets for Piper Installation AMP Connector and 2 Pins Molex Connector and 2 Pins for Piper Installation Switch Label AMP Connector and 2 Sockets Strobe Head Assembly Gasket Tail Light Lens for A500 and A555 Radio Shielded Tail Light Lens Assembly for A500 Spring Radio Shielded Lens Gasket for A470 Flash Tube Assembly Radio Shielded Kit for A469A 11-03696 $123.95 11-03697 $83.50 11-03699 $20.75 11-03211 $4.95 11-03212 $4.95 11-04215 $7.50 11-04216 $7.50 11-03700 $4.95 11-04217 $7.50 11-03701 $3.15 11-03702 $4.95 11-03280 $183.95 11-03703 $7.50 11-03227 $31.85 11-03704 $82.25 11-03707 $13.25 11-03708 $75.25 11-03709 $8.25 11-03225 $74.65 11-03711 $79.00
11-03735 $87.90 11-03230 $61.75 11-03261 $8.25 11-03228 $114.95 11-03659 $159.75 11-03229 $33.25 11-03736 $89.75 11-03263 $79.85 11-03737 $21.50 11-03660 $8.25 11-03215 $109.95
NOTE:
All Whelen Replacement parts reflect at least 30% discount off factory list price. AIRCRAFT SPRUCE WEST
CORONA, CA (877) 4-SPRUCE
552
WHELEN STROBES
Description Part No. Wingtip Position & Strobe (Radio A650-PG-D-14 11-03639 Shielded) Head assy. Wingtip Position & Strobe (Radio A650-PG-D-28 11-06336 Shielded) Head assy. Wingtip Position & Strobe (Radio A650-PR-D-14 11-03642 Shielded) Head assy. Wingtip Position & Strobe (Radio A650-PR-D-28 11-06337 Shielded) Head assy. Radio Shielded Wingtip Strobe & A650-PGPosition Light Head Assemble w/ 11-06338 D-M-28 Molex Connector . A730 Tail Flood Light Assembly 11-03740 A1610-14 Power Supply 11-03666 C-70178-1 Power Supply (Single Flash) 11-04132 C-70188-1 Power Supply 11-04133 C-70190-1 Goose Neck Light (12 Long) 11-04134 Self Contained Strobe 70285-1 70285-1 RadioShielded Red Self Contained Strobe Radio 70285-2 70285-2 Shielded Red with Mask 70285-3 Self Contained Strobe White 70285-3 70285-5 Self Contained Strobe Red 70285-5 Self Contained Strobe Radio 70285-6 70285-6 Shield Red with Mask 70294-1 Power Supply 70294-1 H102 B Mounting Adapter 11-03243 H103 A Mounting Adapter 3-3/4 11-03284 HR-CF200-14 14V Power supply for HR or SA 11-03838 SA402 Lens Assembly for SA & A450 11-04259 Flash Tube Assembly for SA & SA406 11-03250 A450 W1282 Forward Position Light Lens Retainer 11-03232 W1283 Forward Position Light Gasket 11-03209 W1284-G Forward Position Light Lens (Green) 11-03206 W1284-R Forward Position Light Lens (Red) 11-03207 W1285-2 Forward Position Light Base 11-03244 W1284C Lens, Clear 11-04117 W1290-14 14 Volt Position Light Bulb 11-02602 W1290-28 28 Volt Position Light Bulb 11-02604 90029-1 Combination Wing-tip Light Assy. 90029-1 90029-2 Combination Wing-tip Light Assy. 90029-2 90029-3 Combination Wing-tip Light Assy. 90029-3 90029-4 Combination Wing-tip Light Assy. 90029-4 Anti Collision Beacon Assy. Red 90033-1 90033-1 90033-2 Anti Collision Beacon Assy. White 90033-2 34-0226010-91 Lamp Quartz 150 Watt 11-05091 Model # Price $281.95 $278.95 $275.95 $279.95 *A358 $286.95 $318.00 $493.95 $399.00 $464.00 $233.95 $666.00 $646.00 $640.00 $640.00 $662.00 $554.00 $11.75 $45.75 $360.95 $146.95 $73.75 $34.75 $8.75 $38.75 $37.75 $74.75 $108.95 $29.50 $28.85 $1,069.00 $1,069.00 $1,104.00 $1,104.00 $550.00 $523.00 $42.65 A359 Base Assembly Spacer CALL 11-03684 $25.50 $9.85 Model # A343 *A354 70348-01 Post Light (28V 10-32Thread) (RD) 70339-01 $74.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* Requires dash numbers for lens color and finish. Please contact factory.
01-0790095-02 Fixed Landing Light (PAR 46) 01-070095-02 $222.95 38-0240063-00 Sealed Beam Gasket (PAR 46) 19-270407-000 Clamp Ring (PAR 46) 19-250147-000 Clamp Ring (PAR 36) 38-0240197-01 Sealed Beam Gasket (PAR 36) 38-0240197-01 $15.25 19-270407-000 $33.50 19-250147-00 $37.25
INTERIOR LIGHTING
Model # A300-14 A300-28 A315HIR2 A315-HI-B-14 A315-LO-B-14 A315-LO-B-28 A325-ML-14 A325-ML-28 *A350-14 *A350-28 A360-14 A360-28 A360SW 70339-1 70339-02 70339-03 70339-04 70348-00 Description Part No. Price 14V Map Light Assembly 11-03673 $142.95 28V Map Light Assembly 11-03674 $138.95 28V Cockpit Utility Light - Red 11-03678 $72.75 14V Cockpit Utility Light - White 11-03675 $92.25 14V Cockpit Utility Light 11-03679 $30.75 28V Cockpit Utility Light 11-03680 $32.25 14V Reading Light Assembly 11-03294 $259.95 28V Reading Light Assembly 11-03682 $154.95 14V Post Light Assembly 11-03205 $38.95 28V Post Light Assembly 11-03210 $38.95 14V Dome Light Assembly Overhead 11-03685 $122.95 28V Dome Light Assembly Overhead 11-03686 $110.95 Dome Light Assembly w/Switch 11-03629 $136.95 Floodlight Assembly (14V) 70339-1 $127.95 Floodlight Assembly (28V) 70339-02 $126.95 Floodlight Assembly (14V Switch) 70339-03 $143.95 Floodlight Assembly (28V Switch) 70339-04 $148.95 Post Light (28V 10-32Thread) (IW) 70339-00 $74.50
Rotating Beacon Replacement- The round mechanical rotating beacon was used on the vertical fin of all Barons from 1961 thru 1969. Models using this light are 95-55 (1961), A55 (1968-1969). Note: The B55 Baron continued to use this beacon until production stopped in 1982. Model# WRM-10 WRM-25 WRM-30 Description Lexan Dome Clamp Ring Gasket Part No. 11-03257 11-04272 11-04273 Price $25.75 $25.25 $10.75
MISCELLANEOUS HARDWARE
Model# GLJ-106 GLJ-111 GLJ-126 Description Lamp Retainer Lamp Assembly Lens Retainer Assembly Part No. Price 11-03811 $29.50 11-03812 $125.95 11-03813 $116.95
ALL PRICES ON THIS PAGE REFLECT AT LEAST 30% DISCOUNT OFF WHELEN FACTORY LIST PRICES.
553
WARNING SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
*Provides an instantly recognizable voice warning directly in your headset if low vacuum (or pressure) or low voltage develops. * Includes a red warning light mounted close to the gyro instruments. Many aircraft are equipped with backup vacuum systems, however you must first know that your instrument power system has failed before any of these backup systems are engaged. You must know you have a problem before you have a problem. Volt & Vac Alert consists of a small electronic unit that can be mounted anywhere in the aircraft. It connects to aircraft voltage, instrument power (vacuum or pressure), and the aircraft audio system. If the voltage falls below 12v or 24v the voice message CHECK VOLTAGE CHECK VOLTAGE will be heard. Should the gyro power fail, the pilot will hear the voice message CHECK GYROS, CHECK GYROS directly in his headset. The voice message will sound once, and then the red warning light will illuminate until the problem is fixed. The unit can be used in 12v or 24v aircraft with either vacuum or pressure gyro power systems. It can be installed in pressurized or un-pressurized aircraft. Sold as a complete assembly with everything necessary for the installation except a 1 amp fuse or circuit breaker. STCd for most general aviation aircraft P/N 10-00393 ..........$479.95 Whenever the existing stall horn sounds, the pilot will hear the instantly recognizable voice message STALL, STALL from the built in speaker, and directly in his headset. If the gear warning horn sounds, the pilot will hear the voice message CHECK LANDING GEAR, CHECK LANDING GEAR alerting of the problem. No more confusion over which horn is sounding. These voice messages are in addition to the original horn sounds. The Voice Alert consists of a small electronic unit about 2-1/2 by 3-1/2 in size that can be mounted almost anywhere in the cockpit. The installed weight of the unit is less than 1 lb. The unit is supplied as a complete kit consisting of the electronic unit, a pre-wired cable assembly, and all the connecters and mounting hardware. The only other item required is a 1 amp fuse or circuit breaker. Installation is easy, and can be performed by an A&P mechanic or an avionics shop. The system is approved for both fixed and retractable gear aircraft.
Description Part No. VOICE ALERT 2040-1-1 produces voice messages for gear and stall warnings, and can be programmed with up to 8 10-03713 additional warning voices such as altitude, vacuum, fuel, pressures, etc. Supplemental system only. VOICE ALERT 2040-1-2 produces stall and gear voice mes10-00394 sages in the pilots headset. Supplemental system only. VOICE ALERT 2040-1-1P similar to the 2040-1-1 except approved for installation as primary replacement for existing 10-03714 warning units like Cessna Electronic Dual Warning units VOICE ALERT 2040-1-2P similar to the 2040-1-2 except approved for installation as primary replacement for existing 10-03715 warning units like Cessna Electronic Dual Warning units Price $623.00 $525.00 $785.00 $697.00
VOICE ALERT
Designed to provide an additional margin of safety for amphibian pilots by providing a backup electronic means of verifying landing gear position for both water and runway landings. Consists of a small electronic box (about 2.5 inch by 3.25 inch weighing less than 1 lb) that can be mounted anywhere in the aircraft, and 2 panel mounted switches with lights. The system is activated by airspeed. The activation speed can be set by a simple screwdriver adjustment. On takeoff, as the airspeed exceeds the activation speed, the system becomes active. There is a time delay built in to prevent false triggering. When the system becomes active, the lights in the panel switches will illuminate for 6 sec, to alert the pilot that the system is active. The pilot can perform a self test. Can be temporarily disengaged for slow flight. As the aircraft slows below the activation speed for a landing, the landing sequence is initiated. Panel switches are marked "L" for land, and "W" for water. If the gear is in the correct position, the voice message "GEAR O.K." will be heard. If the gear is not in the proper position, the voice message "CHECK LANDING GEAR, CHECK LANDING GEAR" will be heard. This message will continue until the speed is increased above the activation speed, or the gear is placed in the proper position. When installed in aircraft having multiple gear indicating lights, the system will respond with the "CHECK LANDING GEAR" voice warning if it determines that any of the wheels are in the wrong position. Also responds with the warning if the gear indicating lights loose power. Also incorporates an airspeed activated electronic switch which closes whenever the airspeed is above 45 mph. This can be used to activate a transponder, Hobbs meter etc. Supplied as a complete kit consisting of the electronic module, a pre-wired, color coded cable, switches, connecters, mounting hardware etc. The only other item required is a 1 amp fuse or breaker. STCd for many amphibian aircraft and aircraft on amphibian floats P/N 11-07537.....................................$795.00
* Provides both voice and visual warning if the landing gear is not in the correct position for either a runway landing or a water landing. * Airspeed activated, activation speed is easily set from 45 to 90 mph. * Works with aircraft having 2, 4, or 8 gear indicating lights or simple switches that provide gear position. Consists of a small electronic module (2.5 inch by 3.25 inch weighing less than 1 lb), and a panel mounted switch with light. The system is airspeed activated. The activation speed can be easily set using a screwdriver. On takeoff once the speed has exceeded the activation speed, the system activates. A time delay is built in to prevent false triggering due to speed fluctuations. The light in the switch illuminates when the system is activated. The pilot can perform a self test of the system. Can place in a disengage mode which temporarily disengages the system for slow flight. If the aircraft has flaps, a flap switch can be added to cause the landing sequence to be initiated whenever the flaps are fully extended. The unit also includes an airspeed activated switch which closes whenever the airspeed is above 45 mph. This can be used to activate a transponder, Hobbs meter etc. The unit is sold as a complete system including the electronic unit, a pre-made cable assembly, a pre-wired switch, connecters, mounting hardware etc. Expermental aircraft. P/N 11-02258 .............$584.00 An essential bus management circuit designed to protect power sensitive and critical electronics. Starting currents are usually high enough to cause battery voltage to drop below tolerable limits for many electronics systems. The result could leave you without engine instrumentation until EFIS reboots (up to 30 seconds). Protection includes low voltage drop out and essential backup in the event of primary power loss. Filtration on the secondary supply and secondary battery charging are also an integral parts of the circuit. A secondary battery is required for the Power Guage we recommend a 5-12 Amp battery for emergency supply. Several control modes are possible with the system allowing for installation and operational flexibility. Load Ratings: 7A continuous, 10A 10% duty. Dims: 4.75l x 2.75w x 1.2h P/N 11-02044 ..................$135.95
NOTE: This system is not FAA approved. It is intended for installation in Experimental category aircraft only. For Experimental amphibian aircraft consists of a small electronic module (2.5 inch by 3.25 inch weighing less than 1 lb), and a panel mounted switch with light. The system is airspeed activated. The activation speed can be easily set using a screwdriver. On takeoff, once the speed has exceeded the activation speed, the system activates. A time delay is built in to prevent false triggering due to speed fluctuations. The light in the switch illuminates when the system is activated. The pilot can perform a self test of the system.Disengage mode which temporarily disengages the system for slow flight. During this period, the light in the switch flashes indicating the system is disengaged. Pushing the switch again re-engages the system. As the aircraft slows for landing, the system enters the landing mode. The light turns off, and the electronics then checks the gear position lights to determine the gear position. If the aircraft has flaps, a flap switch can be added to cause the landing sequence to be initiated whenever the flaps are fully extended. A switch can be added to the throttle so that closing the throttle with the gear up will cause the warning voice message to be heard. The unit also includes an airspeed activated switch which closes whenever the airspeed is above 45 mph. This can be used to activate a transponder, Hobbs meter etc. The unit is sold as a complete system including the electronic unit, a pre-made cable assembly, a pre-wired switch, connecters, mounting hardware etc. P/N 11-07538 ...............$558.00
The Gear Alert uses an electronic sensor to detect the presence of the ground during landing. If the wheels are up, it instantly sounds a voice warning directly into your headset. It is a full time positive warning system and does not depend on throttle position or airspeed for operation. Gear Alert is supplied as a complete kit with all mounting hardware, doubler plates, connectors, and a pre-wired and tested cable assembly for fast and easy installation. 1 yr warranty. FAA Approved. STCs for most single and twin engine aircraft including Cessna up through the 400 series, Beech uo through King Air series, Piper up through the Chieftain, Mooney and others. P/N 11-21135 ............................$1,438.00
GEAR ALERT
554
Measuring only 4" high by 2 3/4" diameter, it weighs less than 5 ounces! Special dual xenon flashtube arrangement provides ultra-bright flash visible for over 3000' in daylight, much more at dusk and dawn. No separate power pack is required, all electronics are fully contained in the strobe itself. Lens is available in clear, red or green. Each strobe draws less than 300ma. Mounting bracket included. Buy two for wing-tip installation. Must be run from 12 volt battery. Dimensions: 4"x 2.75"(dia) Weight: 4.5 ounces. Features: Operates on 12VDC (12 lead is hardwired to unit) Completely self-contained Water-resistant Ultra-compact Meets FAR 103 Bright 8 joule flash 40 flashes/minute Strobe 12VDC Clear ........................... P/N 11-07769 ....................$47.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ACCESSORIES
Strobe Lens Clear............................... P/N 11-07772 ......................$4.75 Strobe Lens Red................................. P/N 11-07770 ......................$4.75 Strobe Lens Green ............................. P/N 11-07771 ......................$4.75
The Gretz Aero GA-TB2 is a very small audio tone generator used to make an audio tone annoucement through your headset advising of a user selected warning function. This warning tone can be used to get your attention for one of a variety of events. P/N 11-06491 ....................$49.95 The Gretz Aero GA-AM Audio Mixer is a must have economical item if you have two or more audio sources in your aircraft. If you do not want to install a very costly and panel-space-hungry audio panel, the GA-AM is for you. The GA-AM is light, small and mighty for what it does. It can be mounted out of sight behind the panel in any convenient location with no clumsy modules to have to tie up into your wire harness. Up to nine audio sources can be fed into this device. All of the audio sources are wide range adustable for balance to your system. There is even a wide range output level adjust to make the GA-AM compatable with all intercoms without having to tinker with matching resistors. P/N 11-06490 ..................$149.50
Mounted on vertical fin of many Cessna and other production aircraft models. Fully FAA-PMA approved. Only 2.5 dia., 2.5 high. Weighs 6 oz. Unit available with red or clear Fresnel dome. Has 125W quartz bulb. Draws 10 amps nominal at 12V. Use 12 or 14 Ga. wire for hookup. Kit consists of light assembly and 12V/24V power supply. Specify bulb voltage and red or clear dome. 12V Kit (Clear Lens)157-0001C ............ P/N 11-05906...........$124.95 12V Kit (Red Lens) ............................... P/N 157-0001R ........$124.95 24V Kit (Clear Lens)157-0002C ............ P/N 11-05907...........$124.95 24V Kit (Red Lens) ............................... P/N 157-0002R ........$124.95
Description Flasher Red Lens Clear Lens Quartz Lamp 24 Volt/150W Quartz Lamp 12 Volt/125W Gasket Clamp Ring Socket & Plate Assembly Mounting Plate Assembly Aeroflash Resistor 100 W Ref No. A B C D D E F G H Part No. 150-0015 111-0001 111-0004 040-0003 040-0028 080-0001 073-0002 073-0021 073-0055 012-7426 Price $59.75 $13.50 $12.90 $22.00 $19.50 $7.30 $8.30 $10.95 $25.90 $28.85
Helps pilots monitor critical electrical system. STC approved. Features a Multi Color LED display, which is easily viewable from a wide angle. In the event of an alternator/generator failure, the LED display indicates the reserve battery capacity. The display automatically adjusts to the ambient light for IFR or night operation and also serves as a reminder to turn off the electrical system after flight. Comes in either 12V or 24V models and includes all necessary hardware and FAA Documents. The display must be set to Dot mode for FAA approved installations. 12 Volt Digital Voltmeter ..................P/N 10-00752 ............ $87.95 24 Volt Digital Voltmeter ..................P/N 10-00753 ............ $87.95
A high-intensity anti-collision strobe system producing 10 joules. FAAPMA approved. Mount on top or belly of fuselage or on vertical fin. The Xenon lamp is designed to produce symmetrical illumination pattern of light 360 around the aircraft and 70 above and below the horizon. Less than 3 dia., 2-1/2 high. Mounts in 7/8 dia. hole and is secured by two screws. Draws 2 amps nominal at 12V. Kit includes light, remote power supply and 15 ft. cable. Light has clear Fresnel lens and strobe tube. Wts: Light 6 oz., Power Supply 20 oz. Hardware NOT included. 12V Kit ....................................... P/N 156-0007 .................$153.95 24V Complete Kit ....................... P/N 156-0002 .................$153.95 12V Power Supply ..................... P/N 152-0007 ...................$93.95 24V Power Supply ..................... P/N 152-0010 ...................$93.95 Flash Tube Only ........................ P/N 073-0141 ...................$31.40 Flash Tube Assy ....................... P/N 153-0001 ...................$98.50
Solid State Power Supply for each wing tip. Complete with two power supplies, two strobe tubes, lenses and retainer. Specify 12-14V or 24-28V. FAA approved . Used on Grumman aircraft.
Price $329.00 $314.95 $358.95
Kits consist of: Part No. (2)-152-007, 12V Power Supply, (2)-153-008, Light Assy. 156-0010 (2)-152-0010, 24V Power Supply, (2)-153-0008, Light Assy. 156-0011 (2)-152-0021, 24V Power Supply Explosion Proof, (2)-153156-0011EX 0008, Light Assy.
These non-PMAd remote nav/strobe light kits are excellent for ultralights and homebuilts. Kit includes one red light assembly, one green light assembly and two power supplies. Single flash, 12V kit ..... P/N 156-0039-12V ......... $374.95 Single flash, 28V kit ..... P/N 156-0039-28V ......... $374.95 Double flash, 12V kit.................. P/N 11-04762 ................. $396.95
These non-PMAd remote nav / strobe /position light kits are excellent for ultralights and homebuilts. Kit includes one red light assembly, one green light assembly and two power supplies. The nav lights include clear position lights on rear of assemblies. Single flash, 12V kit ..............P/N 156-0049-12V $446.00 Single flash, 28V kit.....................................P/N 156-0049-28V $442.95 Double flash, 12V kit ...................................P/N 11-04763 ........ $464.95
555
AEROFLASH STROBES
AEROFLASH FAA/PMA AIRCRAFT APPROVAL LIST
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aeroflash Original P/N 40-6 40-0010 150-0002 151-0001 152-0004 153-0008 073-0270 152-0004 152-0008 150-0015 151-0001 150-0015 151-0001 40-6 40-0010 40-14 40-0027 73-0165 111-0016 150-0008 150-0010 151-0002 151-0006 152-0004 152-0010 153-0006 151-0008 151-0009
Current P/N 040-0003 040-0028 Same Same 152-0007 Same Same 152-0007 152-0007 Same Same Same Same 040-0028 040-0028 040-0003 073-0270 Same Same 150-0015 151-0001 151-0005 152-0007 152-0010 153-0009 11-02103 11-02104
Description
Price $22.00 $19.50 $109.75 $64.50 $93.95 $112.95 $38.70 $93.95 $93.95 $59.75 $64.50 $59.75 $64.50 $19.50 $19.50 $22.00 $38.70 $19.90 $109.75 $59.75 $64.50 $118.95 $93.95 $93.95 $98.85 $203.95 $111.95
24V/150W QUARTZ LAMP AA1B, AA5A, AA5B 12V/125W Bulb 14V Single or Dual Flasher AA1B, AA5A, AA5B 14V Light Assembly. Red Lens AA1B, AA5A, AA5B 14V Power Supply AA1B, AA5A, AA5B Strobe Assembly AA1B, AA5A, AA5B Varga P/N U-Type Flash Tube Assembly 2150A 14V Power Supply 2105A 12V Power Supply Single Flash Rockwell P/N DVA-2 14V or 28V. Single. or Dual Flasher, DVA-2 112, 112B, 112TC, 112TCA, 114 14V Light Assembly Red Lens 112, 112B, 112TC, 112TCA, 114 Great Lakes P/N DVA-2 12V.-14V. or 24V.- 28V. Sgle or Dual Flsr ,DVA-22T-1A-1,-2 14V Light Assembly Red Lens 2T-1A-1, -2 C17312-3 12V/125W Bulb 150, 172, 177, 177RG, 180, 12V/125W Bulb 182, 185, 188, 206, 207 C17312-1 24V/150W QUARTZ LAMP 210, 337, 28 Volt Version of 185, 188, 206, 207 C622006-0108 U-Type Flash Tube 150, 172, 177, 177RG, 180 C622006-0103 Wing Tip Clear Dome 150, 172, 177, 177RG, 180, 182, 185, 188, 206, 207, 210 C594501-0204 28 Volt Single or Dual Flasher A2E 337 C594502-0102 14V or 28V. Single/ 150, 172, 177, 177RG, 180, Dual Flasher DVA-2 185, 188, 296, 207, 120 C621001-0106 14V Lamp Assembly 150, 172, 177, 177RG, 180, Red Lens X1E-6 182, 185, 188, 206, 207 C621001-0102 28V Lamp Assembly 210, 337, 28 Volt Version of Red Lens X2E 206, 207, 185, 188 C622008-0101 14V Power Supply 150, 172, 177, 177RG, 180, 182, 185, 188, 206, 207, R172, 210 210, 28 Volt Version of 185, 188, 206, 207, R182, 150, C622008-0102 28V Power Supply 172, 177, 177RG, 180, R172 C622006-0107 Wing Tip Strobe Assembly 150, 172, 177, 177RG, 180, 182, 185, 206, 207, 210 Not FAA Approved 24-28V Red Tear Drop Lt Assy Helicopter Not FAA Approved 24-28V Red Light Assy w/ Mt Plate Helicopter
This non-PMAd kit for experimental aircraft only includes (1) 12V clear lens assy. & (1) 12V single flash remote power supply. output 10 joules. Model 156-0029SF Kit........................ P/N 11-00979 ................. $243.95 Replacement Clear Dome .................. P/N 11-00980 ................... $22.75 Replacement Gasket .......................... P/N 11-00981 ..................... $5.90 Replace. Flashtube w/pos. lamp ........ P/N 11-00982 ................. $136.95
P/N 156-0017 consists of: $157.95 One-152-0007 12 Volt Power Supply One-163-0001 Light Assembly One-073-0217 Cable Assembly P/N 156-0018 consists of: $157.95 One-152-0010 24 Volt Power Supply One-163-0001 Light Assembly One-073-0217 Cable Assembly P/N 156-0018EX consists of: $168.50 One-152-0021 24 Volt Power Supply Explosion Proof One-163-0001 Light Assembly One-073-0217 Cable Assembly Spare Parts for Light Assemblies:
Price $93.95 $93.95 $109.95 $6.25 $25.90 $6.80 $8.40 $31.40 $13.50 $12.90 $7.30
152-0007 12 Volt Power Supply Clear Anodized 152-0010 24 Volt Power Supply Gold Anodized 152-0011 12 Volt Double Flash Power Supplies (each draws 2.7 amps and weighs 1.33 lbs.)
Ref # A B C D E F G H
P/N 152-0007 152-0010 152-0021 073-0271 073-0055 101-0020 080-0008 073-0141 111-0001 111-0004 080-0001
Description 12V Power Supply Clear Anodized 24V Power Supply Gold Anodized 24V Power Supply Explosion Proof Blue Anodize Cable Assembly Mounting Plate Assembly Hold Down Ring Gasket Strobe Flashtube Red Lens Clear Lens Gasket
152-0021 24V Power Supply Explosion Proof Blue Anodize B C D E 073-0270 Strobe Flashtube 101-0084 Lens Retainer 080-0018 Gasket 111-0016 Clear Dome
Red ............................ P/N 156-0019R ..............$507.00 Green......................... P/N 156-0019G..............$557.00 Spare Parts:
Ref # P-N Description Price ea. A 152-0024 24V Power Supply $175.95 B 111-0068 Clear Dome $35.50 C 040-0043 Strobe Flashtube $63.25 D 101-0238A Hold Down Bracket $14.00 111-0066 Red Navigation Dome $17.60 E 111-0067 Green Navigation Dome $17.95 040-0046 Navigation Lamp $24.00 F *080-0046 O-Ring Gasket $9.80 *080-0042 Flange Gasket $10.80
*Not Shown
556
W1285 series are the same design as Grimes Model E. Available with red or green lens and 12V or 24V bulb. W1250 W1285 PG/PR are FAA approved position lights and are designed to fit underneath the wing tip fairings. W1285 14V 28V 14V 28V 14V 28V 14V 28V Green W1285 Assembly Green W1285 Assembly Red W1285 Assembly Red W1285 Assembly
CM
W1250
WP ME HA AP LG EP CS IN EL AV TO PS
$209.00 $286.95 $215.95 $216.95 $98.75 $157.95 $157.95 $157.95 $29.50 $28.85
W1250 Green W1250 Assembly 11-04263 Green W1250 Assembly 11-03278 Red W1250 Assembly 11-04264 Red W1250 Assembly 11-03282 Replacement Bulbs 14V W1290 Bulbs 11-02602 28V W1290 Bulbs 11-02604
GRIMES MODEL B - Early type wing light with flat mounting pad. Mounts on tip of wing. Wt. 7oz Order by part number. SINGLE CONTACT Model B wing w/#93 Bulb New Surplus ......................... $142.95 Green, 14V ....................................P/N A-2430-1-G Red, 14V ....................................... P/N A-2430-1-R
Wing tip light plate is welded or screwed to wing tip bows to attach teardrop type position lights. Tail light plate is welded to rudder to attach Model S tail light. Model E Wing Light Plate . P/N 11-06900 . $25.50 ea Model S Tail Light Plate .... P/N 11-07000 . $24.85 ea
8000 SERIES (LED) ANTI-COLLISION BEACON - LED based self-contained, High Impact Polycarbonate Optical Lens. Lighter, Brither, Cooler Longer Life (up-to 50,000 hrs.) and draws less than 1 amp. (.13 amps) @ 12vdc. Weighing in at 3.5oz. it stands 3" high and 2.5" in diameter. P/N 11-07241 (Red) ........................... $81.25 P/N 11-07246 (Clear) ......................... $79.65 MODEL 918 (LED) TAIL LIGHT TL918 TAIL LIGHT - LED based Tail Light that weighs only 1.5oz. High Impact Polycarbonate Optical Lens. Up-to (50,000 hrs.) life. Draws .13 amps @12vdc. It measures approximately 1.6 high and 1.4 diameter. P/N 11-07242 ...................... $96.75 MODEL 927 (LED) ANTI-COLLISION BEACON - Completely Completely Self-Contained LED Based Anti-Collision Beacon 927ACB - RED High impact polycarbonate optical lens. Upto (50,000 hr.) life. Draws .14 amps@12vdc. It measures approximately 1.6 high and 1.4 diameter. Thats right, it is in the same package as the Tail Light! Lighter, Brighter and Cooler, and weighs only 1.6 oz. Flasher included. P/N 11-07243 (Red) ................ $109.50 P/N 11-07244 (Clear) .............. $110.95 ELECTRONIC (IN LINE) FLASHER MODEL PSA-EF - High Impact Polycarbonate Case. An (in line) 12vdc up-to 5amp flasher to flash all those lamps you always wanted to flash. 1 x 1 x 1/2, wt .8oz.P/N 11-07245 ....................... $27.50
These indicators identify your wingtips when taxiing at night, and assure your nav lights are working. Installs in minutes with just a screwdriver, and you dont disconnect the lights to do it. Works with high-or-low-wing aircraft, thick wing too. Designed for use with Grimes #A-1285 & #B-6345 nac lights, which means practically all aircraft. P/N 5122 ........ $10.95
Upgrade your Indicating, Position, or Recognition lights to LEDs. These lamps fit standard S.C. Bayonet Indexed Base Sockets (Bay15S). Converts common Incandescent Lamps to LED Lighting without modifications. (Use a new clear plastic lens for maximum brightness) and you are ready to go. They last longer, run cooler, and draw less than .15amps. Non-PMA. Description Part No. Price LED75 12V Red Lamp 11-07744 $32.50 LED75 12V Green Lamp 11-07745 $32.50 LED75 24V Red Lamp 11-07746 $33.75 LED75 24V Green Lamp 11-07747 $33.75 LED75 TPL-12 Tail Position Lamp 11-07748 $33.75 LED75 TPL-24V Tail Position Lamp 11-07749 $33.75
T1284PC-Clear, polycarbonate lens high impact polycarbonate optical lens, for use with new LED lights. Direct replacement for your standard red, green and clear glass navigation lens. Use with standard 1283 nav lens gasket. P/N 11-09299.............................$14.85
BV
557
AVEOFLASH LIGHTING
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Aurora series AveoFlash LSA is the incredibly popular light of the light sport, kit, experimental and ultralight industry. At only 83 grams, and with an extremely aerodynamic shape and minimal footprint, the AveoFlashLP LSA light is now standard on most leading S-LSA and kit planes. With synchronization as a standard feature, the LSA light is a complete solution for navigation, position and strobe to all international aviation requirements and standards. Available with a variety of mounting adapters and custom composite fairings, the LSA light is extremely easy to install. Encapsulated in the exclusive AveoDiamidium formulation, these are virtually unbreakable. Exclusive limited aircraft lifetime warranty there is no risk to ever need to buy another set of wing lights due to LED burnout. Aveos policy is simple, IF IT FAILS THEYLL REPLACE IT! Integrating the most technologically-advanced and brightest LEDs available in the world to the amazing and all-new exclusive AveoOptimizer circuitry, the futuristic E-Series are marked as LP, for low profile. At a fully 25 mm (1 inch) lower overall height than the 2008 AveoFlash lights. Current consumption (for 12V): steady 0.24A flash 1.65A (@ 200ms)...................................................... P/N 11-07360............$681.00 AveoEngineering introduces the exclusive next-generation AveoMaxx Premiere 6-in-1 embedded wingtip light solution (LandingTaxi-WigWag, Nav-Pos-Strobe wing lights not included and must be purchased separately). Unlike all the Brand X LED landing light products out there, which are just a collection of commercial TIR lenses placed over some industry standard single LEDs, the AveoMaxx is the worlds first ultra-high power LED landing light module, incorporating the amazing Aveo MaxiChip power and performance. The AveoMaxx uses far less power than competitive products illuminated by mercury-arc, high intensity discharge, or halogen lamps, which means they help to reduce air pollution from carbon emissions. Mercury and Lead-free, this RoHS compliant environmentally - friendly technology helps reduce power consumption and the amount of hazardous waste entering the environment. Finally, a green aircraft light! Please note that this light contains the landing/taxi/wigwag functions and has a mount on its housing for the addition of wing lights. AveoFlash LSA and Ultra wing lights are sold separately and either model is compatible with and able to be mounted on this lights housing. P/N 11-09675............$595.00
14 Volt Navigation/Position/Strobe LED wing lights [from the AveoEngineering Aurora Series of AveoFlash lighting] At less than an inch in height (0.87 inch/22 millimeters), the new PowerBurst wing light will save you on drag. It is a value light that does not sacrifice anything in performance nor in standards as do other economy-priced lights offered by other light manufacturers. Aveo's exclusive and highly advanced optics and chromed reflector system, unmatched power and led management circuitry, and famous lowest-drag profile in the industry are all combined into this product. Plus there is a 3 year limited warranty from Aveo on led burnout. Meets ALL DO160F Environmental Standards These lights are popular for ultralights, kits, sport, LSA and experimental aircraft. PLEASE NOTE: The PowerBurst is only for 14 volt applications. Sold as a pair of lights: one green/white, one red/white. P/N 05-04877 ................$396.00
An extra-performance model of the wildly successful AveoFlash E-SeriesLP, the new Ultra led wing lights feature even more LEDs packed into the same space and are optically optimized through Aveos comprehensive optics software. The Ultra is for those customers who want phenomenal brightness and can afford the slightly higher cost. Every Aveo LED light comes with the Exclusive free-replacement lifetime warranty to your aircraft -- they are the last lights you will ever need to purchase. This pair of wing lights has a red/ white and a green/ white led lighting combination for navigation/ position/ strobe. The voltage input range is from 9 32 volts. NO external power supply or strobe box is needed. These aircraft lights meet both TSO C30c and C96a design specifications and EXCEED the requirements of TSO C30c, C96a, SAE AS 8037 and AS8017a, plus DO-160B. P/N 11-07933 ...............$783.00 2-in-1 Position & Strobe , popular miniature anticollision light for Trikes, PPC, UAVs, ultralights Extremely lightweight at only 53 grams 9-32 volt input range No external power supply or strobe unti, an Aveo world first Light synchronization feature Unbreakable Diamidium encapsulation Exclusive Lifetime Warranty Red - 9-32V ............................................. P/N 11-08127............$339.00 White - 9-32V............................................ P/N 11-08134............$339.00 PosiStrobeXP, a higher performance mini-position / strobe, the all-new and super bright PosiStrobeXP. Integrating the most technologically-advanced and brightest LEDs available in the world to the amazing and all-new exclusive AveoOptimizer circuitry. White / White 9-32V. Exclusive limited aircraft Lifetime Warranty. P/N 11-07361............$305.00 The RedBaron Maxi version incorporates 40 of the brightest LEDs available in the world today, with chromacity and intensity compliant to all international aviation and safety standards. The optical performance is incredible, and these are the ideal replacement unit for any anticollision light system in existence. Features: Popular miniature anticollision light for certified aircraft requirements, Extremely light weight, 9-32 volt DC input range No external powersupply or strobe unit, Lightsynchronizationfeature, Minimumdragprofile, Unbreakable Diamidium encapsulation Exclusive Life time Warranty, Unmatched circuit technology Advanced computer and goniophotometer engineered optics. White P/N 11-08425 ...................$739.00
POSISTROBE MINIMAX
POSISTROBEXP
Exhaustively engineered to the finest optical angles and to ranges that far exceed all certification standards, and also thoroughly and rigorously tested to the latest DO-160F environmental testing standards. Incorporating special highly reflective chrome reflectors that are designed by special software to optimize angular intensities to design requirements, the Andromeda lights are ideal for aircraft that want to be seen at the maximum distance possible, while still enjoying extremely low electrical draw and the absolute minimum drag profile. Encapsulated in the exclusive AveoDiamidium formulation, the Andromeda lights are virtually unbreakable and with the exclusive aircraft lifetime limited warranty, there are very few owners who would ever need to buy another set of wing lights again. The Aurora model of the Andromeda is currently available in the HSLP unibody construction................................. P/N 11-08427.........$1,097.00
The Aveo Trike Mount Systerm is an extremely lightweight adapter to mount your Aveo lights to your trike or ultralight frame. Mount system versions include adapters for holding the Aveo Wing, Posistrobe, and Powerburst lights. Features: Aluminum construction with stainless bolts. Extremely lightweight. Hinged at two points to permit quick angular mount adjustment to meet lighting requirements. Aveo Lifetime Warranty. 9-32 volts Aveo lights operation. For Wing Light ...................................P/N 11-09976 .....................$89.00 For Posistrobe ...................................P/N 11-09977 .....................$89.00 For Powerburst ..................................P/n 11-09978 ......................$89.00
558
AVEOFLASH LIGHTING
The RedBaron Mini is a cousin to the RedBaronXP, the worlds smallest and brightest total coverage LED anticollision light. The new RedBaron Mini resulted from requests by high-performance racing aircraft, super lightweight UAVs in the defense industry, and aircraft/helicopter manufacturers who wanted an upper and lower anti-collision light due to mounting area constraints. The answer came in this incredible new light, only 27 mm high and only 110 grams in weight. Exceeding all TSO intensity requirements and all DO-160F environmental requirements, the RedBaron Mini is now the worlds smallest anti-collision light. White ..... P/N 11-10534 ....$495.00 Red ........ P/N 11-10535 ....$495.00 Incorporates 36 of the brightest LEDs available in the world today. White. ....................P/N 11-08423 ...................$575.00
REDBARONXP
If you are replacing a Whelen anticollision light, this adapter by Aveo is designed to match up perfectly with your existing mounting site. Adapter works for following Whelen models: A450 A470A 7108001 7108006 7108051 7105500 7105501 9052001 9052051 Specifications: Universal holes (4x1.75 x 4x1.625, 4x1.25). Color: Silver. P/N 11-10631 .....................$69.00
Introducing the Aveo MaxiMini - the ultimate recognition light. Spawned from the incredible technology of the incredible and unmatched RedBaron AntiCollision series, the new MaxiMini is the worlds brightest and smallest recognition light, at only 27 mm high and weighing only 85 grams. The MaxiMini only comes in aviation white led color, since it is 43% brighter than red leds, which means you will BE SEEN, NOT SORRY for sure! And of course, the EXCLUSIVE AVEO LIFETIME WARRANTY means your investment is protected. The MaxiMini, when only the best and the brightest will do. Features include: Exclusive Lifetime Warranty, Unbreakable Diamidium encapsulation, 9-32 Volt Input Range, Vibration Proof, Waterproof, Lowest Drag Profile recognition light, Anodized aluminum finish, Extremely light weight............ P/N 05-04934 ....$599.00
AveoEngineering introduces the exclusive next-generation AveoMaxx landing/taxi/wigwag light module. Unlike all the Brand X LED landing light products out there, which are just a collection of commercial TIR lenses placed over some industry standard single LEDs, the AveoMaxx is the worlds first ultra-high power LED landing light module, incorporating the amazing Aveo MaxiChip light-emitting surface power and performance assembly. The AveoMaxx technology features a solid state light source that integrates the benefits of both LED and laser technologies. A unique lattice structure results in maximum surface emission from a one square centimeter massive LED source - resulting in uniform and unequalled brightness over the entire LED chip face, exceeding up to 2500 lumens per chip. This optical power and brightness for the first time allows an LED-configured light to replace arc or halogen lamps in applications like landing lights, where arrays of traditional LEDs cannot. With an amazing lumen retention level of over 70% after 60,000 hours, and 100,000 hour design life, these lights will far exceed the lifetime of the aircraft. Features include: AveoMaxx configuration incorporates the internal custom optic RockyReflector system Taxi Light and WigWag function from the exclusive custom optics of a second proprietary RockyReflector module with 18 integral Hi-Power LEDs dedicated to these functions alone Integral custom PowerOptimizer supply and AveoSmartController circuitry eliminates bulky external strobe or power boxes as pioneered only by Aveo in all of its products for more than 3 years 5 Options of heat pipe and heat sink integral to the housing for maximum operating efficiency For inside-cowling or other location mounts, the AveoMaxx is an aero dynamically streamlined module that is versatile enough to be mounted in the optimum location for your particular aircraft. In the cockpit, simply add Aveo RockRack led-backlit custom icon rocker switches for the ultimate control of your entire aircraft lighting system, with specific icon switches to control all functions AveoMaxx features an adjustable tilt mounting system the Aveo Maxx lights can be set to the optimal angles for your aircraft operating requirements with the simple turn of a screwdriver The AveoMaxx uses far less power than competitive products illuminated by mercury-arc, high intensity discharge, or halogen lamps, which means they help to reduce air pollution from carbon emissions. Mercury and Lead-free, this RoHS compliant environmentally - friendly technology helps reduce power consumption and the amount of hazardous waste entering the environment. Finally, a green aircraft light! P/N 11-09676 ...................$573.00 Aveos incredible capacitive-sensing technology from its highly popular EyeBeam Touch products has now been engineered into an even smaller footprint, providing a one-color LED cabin/cockpit/area lighting product for those with limited installation space or only simple lighting needs. With one light finger touch you can control the power and the brightness scale and the light easily swivels to put the beam where you want it. No mechanical switches to fail, no bulbs to burn out. The EyeBeam Mini comes with a variety of easily-applied color faceplates, with standard colors of silver and black. The EyeBeam Mini is made from anodized aircraft grade aluminum. Cockpit and cabin lighting, especially on aircdraft, helicopters, boats, recreational vehicles and trucks are plagued by problems from vibration... the EyeBeam product line from AveoEngineering overcomes this with a vibration-proof product that has the exclusive Aveo lifetime warranty. Featuring: 9-32 volt input range No external power supply Swiveling light permits light beam control Capacitive sensing touch controls No mechanical switches to fail Exclusive Lifetime Warranty Unmatched circuit technology Silver .........................................P/N 11-09678 ...................$168.95 Black .........................................P/N 11-09679 ...................$168.95 EyeBeam Dome - Remote Touch Control Interior LED Light The EyeBeam Dome was developed to meet the requests of an interior dome light for all aircraft, that would complement the amazing Aveo EyeBeam products, and their unique touch-controls. Long gone are the days of mechanical switches which can corrode and spark, etc. Available with a remote control finger-slide panel for intensity and operation. Black .........................................P/N 11-10627 ...................$211.95 Silver .........................................P/N 11-09679 ...................$211.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The AveoMaxx uses far less power than competitive products illuminated by mercuryarc, high intensity discharge, or halogen lamps, which means they help to reduce air pollution from carbon emissions. Mercury and Lead-free, this RoHS compliant environmentally - friendly technology helps reduce power consumption and the amount of hazardous waste entering the environment. Finally, a green aircraft light! All fit the standard PAR 36. The brightest model (intensity of 30) contains TCAS sensing for automatic trigger of recognition wig-wag mode. 30 (brightest) .....................................P/N 05-06492 ...................$975.00 20.......................................................P/N 05-06493 ...................$825.00 16.......................................................P/N 05-06494 ...................$725.00
The AveoMaxx uses far less power than competitive products illuminated by mercury-arc, high intensity discharge, or halogen lamps, which means they help to reduce air pollution from carbon emissions. Mercury and Lead-free, this RoHS compliant environmentally - friendly technology helps reduce power consumption and the amount of hazardous waste entering the environment. Finally, a green aircraft light! The AveoMaxx Atlas is smaller than the Hercules and requires an optional adapter for PAR 36 replacement use. Perfect for nosegear applications and use with smaller aircraft. 15 (brightest) .....................................P/N 05-06495 ...................$725.00 10.......................................................P/N 05-06496 ...................$649.00
559
Introducing the revolutionary EyeBeam Touch LED Cockpit/Map/Cabin light system. With both red and white led lights included as standard and led backlighting of its touch control panel, the EyeBeam Touch light swivels to adjust your beam to where you want it. Integral Capacitive Sensing processor technology in the EyeBeam Touch means no more buttons to locate and push and no more mechanical failures. Just a simple swipe of your finger to adjust brightness on the dimming slide bar is all it takes. For those flimsy headliners in your cockpit there is finally a light that will not be pressed into your roof to select what you need! The EyeBeam Touch light is available in white, black or silver finish. Extra face plates available and sold separately. Capacitive sensing technology means a simple light touch of your finger, with or without gloves, to turn the light on/off, select red or white led lighting, and adjust the brightness -- all with the quick touch of your finger. The advantages of capacitive sense technology now used in many smartphones and other electronic devices are clear: Eliminates ugly and worn-down mechanical buttons and sliders LEDs replacing bulbs means extremely low electrical load Resistant to environmental factors: water, temperature, humidity Power supply: 9-32 volts Current Cunsumption:110 mA @ 12Volts Capactive Sensing Interface with LED backlighting 9 incremental step capacitive sensing slide bar for brightness adjust 2 x Red LEDs 2 x White LEDs Swiveling Beam 2024 Anodized Aluminum Construction Description Part No. Price AveoFlash Eyebeam Touch White Finish 11-07864 $169.00 AveoFlash Eyebeam Touch Black Finish 11-07865 $169.00 AveoFlash Eyebeam Touch Silver Finish 11-07866 $169.00 Accessories Part No. Price AveoFlash Replacement Faceplate White 11-07867 $8.95 AveoFlash Replacement Faceplate Black 11-07868 $9.90 AveoFlash Replacement Faceplate Silver 11-07869 $8.95 AveoFlash Sticker Adhesive for 11-08129 $5.00 Replacement Faceplates The popular Aveo EyeBeam Touch capacitive sensing controlled cockpit and cabin lights are now available in NVG configuration, that is they include green LED lighting compatible with night vision equipment. Also included with the NVG model EyeBeam is the standard selection faceplate locations of white, red and blue LEDs too, so whatever your operational conditions there is a lighting option to match it available from this amazing product. With one light finger touch you can control power, white LED, red LED, green LED, blue LED or the brightness slider scale easily with no mechanical switches to fail and no bulbs to burn out. The EyeBeam NVG also features as standard in its firmware automatic light dimming to OFF and automatic ON for the light when coupled to a door microswitch sensor. With a standard 2 minute delay programmed in. The EyeBeam overcomes this with a vibration-proof product that has the exclusive Aveo lifetime warranty. Features: 9-32 volt input range, No external power supply, Swiveling light permits light beam control, Capacitive sensing touch controls, No mechanical switches to fail, Exclusive Lifetime Warranty, Unmatched circuit technology. Specifications: Power supply: 9-32 Volts, Current consumption: 110 mA @ 12 Volts, Capacitive Sensing Interface with LED backlighting, 9 Incremental steps capacitive sensing slide bar for brightness adjust, Swiveling Beam, 2024 Anodized Aluminum Construction Description Part No. Price Silver Eye Beam Touch NVG 11-08444 $239.00 Black Eye Beam Touch NVG 11-08445 $239.00 Accessories Description Part No. Price Silver Faceplate 11-08429 $8.95 Black Faceplate 11-08428 $8.95
SWITCHES Description Lighting 10 pk - Nav, Strobe, Taxi, landing, Beac/AC, Cockpit, map, Panel, Wig-Wag, On/Off Avionics 10 pk - Autopilot, Nav1, Nav2, Generator, Avionics Master, Weather, Standby Vacuum, Comm, Camera, Music Ice & Heat 10 Pk - De-ice, Prop De-ice, Cabin Heater, Fan, Defrost, Carb heater, Boots, TKS, Pitot Heat, Seat Heat, Alternator Pumps 10 Pk - Fuel Pump, Fuel Pump, AUX, Transfer Pump, HUD Pump, Boost Pump, Boost Pump High/Boost Pump Low, Prime, High/Low, On/Off General 10 Pk - Emerg Bus, Up/Down arrow, MagL, MagR Aux, On/Off, High/Low, Aux Master, Avionics Master, Pitot heat Engine & Airframe 10 Pk - Standby ALT, Battery Master, Starter, Elec Ignition, Speed Brake, parachute, Elec Trim, Left Mag, Right Mag Auxiliary 19 pack - Cockpit, Fuel Pump, Aux, Standby ALT, Alternator, Standby Vacuum, MAP, Prop De-ice, Autopilot, TAXI, Weather, Panel, Fan, Beac/Ac, Landing, NAV, Cabin Heat, De-Ice, Strobe Red switch top with icon Battery Master Red switch top with icon Avionics Master Blank Red Top Blank Black Top SWITCH BOTTOMS Switch Bottom part - red - 12V Switch Bottom part - green - 12V Switch Bottom part - blue - 12V Switch Bottom part - white - 12V TAB TERMINALS Aveo 14 gauge Tab Terminal 12 pack. Aveo 14 gauge Tab Terminal 24 pack. Aveo 14 gauge Tab Terminal 60 pack. Aveo 14 gauge Tab Terminal 100 pack. MOUNTING COMPONENTS End Module Middle Module Single Module Connector (1 per switch) Removing Tool - 2 required to remove the switch.
Part No.
Price
11-07826 $22.85 11-07827 $22.85 11-07829 $22.85 11-07832 $22.85 11-07830 $22.85 11-07831 $23.75
11-06640 $72.59 11-06641 11-06642 11-08420 11-08421 $4.70 $4.70 $4.70 $4.65
560
The TRIPLE MAGNUM 3 LIGHT STROBE Driver is a 12 volt DC operated system. It fires 3 strobe heads in a double wink pattern. The two wing tip lights alternate between left and right while the tail, or third light is synchronized to flash every time one of the wing tips are flashing. Resulting in about 140 flashes per minute. Driver box measures 4 X 7 X 1 , weighs 17.2 ounces. Current draw with 3 standard heads is about 3 amps. If using two COMBO heads and one standard head it is about 3 Amps . Triple Magnum 3 Light DRIVER BOX ONLY - 12 volt Model TRI3-DO .............................. P/N 11-01355 ...........$230.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
TRI 3 DRIVER with 3 STANDARD HEADS, Streamline or Round. - with 3 standard SL or ROUND FRESNEL heads, please specify. Complete with 75 of wire, plugs, pins, adaptor plates (for flat or curved surface mounting) and all the installation hardware. TRI3-SL P/N 11-01829 ...........$375.00 TRI 3 DRIVER with 2 COMBO HEADS & 1 STREAMLINE, ROUND FRESNEL or TAILLIGHT HEAD - The TRIPLE MAGNUM 3 light system with 2 COMBO & a choice of either 1 Standard Streamline Head, 1 Round Fresnel head or 1 Round Tail Light without LEDs (Additional cost for the Round Tail Light) for the third head, please specify. Complete with 75 of shielded wire, plugs, pins, adaptor plates (for flat or curved surface mounting) and all the installation hardware. (Please specify choice at time of order) TRI3-SLC ............................ P/N 11-05125 ...........$579.95 TRI 3 DRIVER with 3 COMBO HEADS - The TRIPLE MAGNUM 3 light system with 3 COMBO heads, please specify Streamline Combo or Round Tail light Combo for third head. Complete with 75 of shielded wire, plugs, pins, adaptor plates (for flat or curved surface mounting) and all the installation hardware. The tail COMBO heads both have a strobe and white LEDs to be used as a STROBE and WHITE tail light. TRI3-SLCW P/N 11-05119 ...........$599.95 KIT #2 IS A SET OF SPECIAL HEADS - For builders of RV 7, 9, & 10 aircraft or any other kit that has like mounted wing lights. Due to the wing light configuration on these aircraft, the white rear facing LED on the regular Combo head is of no use. A white position or tail light is then needed. They are STROBE and RED / GREEN Position light equipped heads WITHOUT the white LEDs, a 3 strobe driver box, that fires both wing strobes in an alternating double wink pattern and a third STROBE and LED equipped round tail light for mounting at the rear of the aircraft. The tail strobe fires in sync with each wing. Also, included is 75 feet of 5 conductor shielded wire, plugs, pins and mounting hardware. Total power draw for this system is about 4 Amps at 14 volts. TRI3-RV ........................ P/N 11-05834 ...........$584.00
561
LSA and EXPERIMENTAL aircraft line of lights. Made in the USA, called the LTR which stands for Landing-Taxi-Recognition. The LTR consists of 9 extremely bright LEDs, focused through special lenses. This results in a white beam of light that has been measured with a light meter to be 2 1/2 times the brightness of a 55 watt halogen lamp while drawing 1/3 the current and 1 1/2 that of an HID lamp at about the same current. Powered by 12 to14 volts DC it uses only 1.35 Amps of power. The LTR dimensions are 3 Dia. X 1 deep and weighs less than 6 ounces. Flashing it on & off can be accomplished with an led flasher from your local auto parts store. You must see the LTR in operation to believe the light output. Sold with a money back satisfaction guarantee. P/N 11-06854...........................$229.00 The HOT BOX is a complete electrical system intended for use with an electric starter equipped engine. The box contains a heavy duty regulator, starter solenoid, custom length cables, labeled terminal strips, a fuse panel and many more features. Hot Box with Regulator HB ..................... P/N 11-05144..............$240.00 Hot Box no Regulator HB ....................... P/N 11-05145..............$208.95
The SunRay Plus is a wing-mounted LED (Light Emitting Diode) landing light with a builtin wig wag feature in addition to its standard operation as a landing/taxi light. The SunRay Plus is a very intense light source that uses 4 high power LEDs to produce up to 1,000+ lumens of light and 30,000 candela using 10 watts of power. Each SunRay Plus light uses less than half the power of an equivalent 55 watt halogen light while producing more usable light in a more narrow beam. The LED light source last up to 50,000 hours of constant operation, so you will never have to replace this light once it has been installed. It will outlast both Halogen and HID lamps. The SunRay Plus is protected against overheating with a built in protection circuit, is protected from lightning transients and ESD, voltage spikes, reverse voltage, and undervoltage conditions. Polycarbonate leading edge windows are commonly used with wingmounted landing lights, and are typically available for most airplane types from a number of third-party suppliers. This light is small enough to fit in the wingtip cutout found in Vans RV kits. Specifications: Power: 17 Watts, Voltage: 9-36 VDC, Lumens: 1,000+, Lens Material: Polycarbonate, Candela: 25,000+, Beam Angle: 10 Degrees, Rated Life: 50,000 Hours, Temperature Range: -55C to +70C, Weight: 5 oz, Dimensions: 2.7 x 2.7 x 1.7 P/N 11-09348 ......$289.95 An all LED navigation/position/ strobe designed for the wingtips of an aircraft and exceeds 400 effective candela for the anti-collision light. The Pulsar is the same size as the traditional forward and rear facing position light with anti-collision. The Pulsar does not require an external power supply and will retrofit the mounting footprint of traditional legacy lighting. Specifications: Voltage Range: 9-36 VDC, Length: 5.6, Current Draw at 12VDC: 1.7 Amp Avg / 4.5 Amps Peak Width: 1.8, Power Consumption: 20 Watts Avg, Depth: 1.5, Strobe Power Supply: Built In, Weight: 4 Oz, Strobe Synchronization: Built In, Heat Sink Material: Clear Anodized Aluminum, Thermal Protection: Built In, Lens Material: Polycarbonate, Nav/Position Light: Exceeds 100 candela, Screw Mount: 3x 6-32 Machine Screws, Strobe: Exceeds 400 effective candela, Rated , Temperature Range: -55C to +70C P/N 11-09349 ........................$985.00
This unique LED lighting system operates from a standard 9 volt battery. The system is designed to replace one or more inspection panels on the bottom of each wing with a new inspection panel and a battery operated LED light. This LED will provide lighting around the aircraft for loading passengers or assisting in preflight inspections during night time operations. The LED has been designed and tested specifically for aircraft applications where altitude and temperature fluctuations can destroy certain components of a standard LED. The unit is also equipped with an indicator to assist the pilot in finding the switch in the dark. A timing feature allows the operator to run the light for either 3 or 15 minutes after which time the unit will shut itself off. Available with your choice of 5 different sized inspection panels. STC d for many models of Cessna Aircraft. Visit or website for aircraft eligibility list. Description Part No. Price Courtesy Light with 5-1/16 Inspection Panel (Most Common) 11-05741 $119.85 Courtesy Light with 5-11/16 Inspection Pane. 11-05742 $119.85 Courtesy Light with 6-1/32 Inspection Pane. 11-05743 $119.85 Courtesy Light with 6-13/64 Inspection Pane. 11-05744 $120.95 Courtesy Light with 7-9/16 Inspection Panel. 11-05745 $119.85
The new LED technology allows excellent navigation lights with only approximately 10% of the input power, compared with conventional navigation lights. The casting in a high-optical plastic makes the EPL (Electronic Position Light) absolutely insensitive against water, vibrations and other environmental influence.
The efficiency of the output is much higher than with conventional electric light bulbs. The self-warming of the EPL is low and can be determined as safe. To avoid overheating, the heat balance is controlled electronically. As a precaution you must pay attention to ventilation with a cover installed, so that no heat accumulation within the casing can appear. This may be assumed by suitable constructive measures. These lights are manufactured in Germany. EPL Wing Tip Light Set(1 red, 1 green) ....... P/N 11-05120 ........$349.95 EPL Tail Light .............................................. P/N 11-05121 ........$229.50 EPL Wing / Tail / Strobe Light ...................... P/N 11-05122 ........$358.95 EPL ELL 4 Light Set ..................................... P/N 11-05123 .....$1,070.00
The LED task light features a rain and brake light, two separate functions in the same package. The LED task light module has a high flash rate which is important in attracting attention in low visiblitity conditions. This is a three wire unit with wires for Brake, Rain and battery negative. It uses LOW power, so minimal that you can power it from a single 9 volt battery. Low drain on battery and alternator equals more horsepower, more valuable horsepower available to win races. No resistor to install or break like other LED lights. Specifications: 18 Super Bright White LEDs, Solid State LED Less power than an incandescent bulb which uses 1.8 amps ore more, High vibration resistant, Waterproof, Made In USA, Operating voltage range 5vdc to 18vdc, Dimensions: 2.7x2.5x0.89 P/N 11-02881.............................$74.95
Recessed mount convenience light. 3 Bright LEDs behind a frosted panel. Recessed mount with hardware. Dimensions: 2.25 x 2.25 x .5 depth. #6 mounting holes with snap on cover. 12 Volt DC or 24 Volt DC, very low power drain (0.1mA). Applications: Mounts flush into foot wells, door panels, and side panels. Ideal as a convenience light, mp light, or chart light. 12V White ................. P/N 11-09266.................$13.90 12V Red ................... P/N 11-09267.................$13.90 12V Blue ................... P/N 11-09642.................$12.90 12V Green ................ P/N 11-09643.................$12.90 24V White ................. P/N 11-09268.................$13.90 24V Red ................... P/N 11-09269.................$13.90 24V Blue ................... P/N 11-09644.................$12.90
562
AEROLEDS
Designed as a LED drop in replacement for the existing GE4509 PAR 36 aircraft lights. Landing light projects 30,000 candela using 30 Watts/3 AMPs max of power. Taxi light projects 10,000 candela. Mounts with existing ring clamp. Power consumption: 30 Watts Max; Current Draw at 12VDC: 3 Amps Max Available in taxi or landing lights. Clamp Mount: Par 36 Ring Clamp. Over-temp Sense Protection; ensures our 50,000 hour lifetime guarantee. Low-voltage Sense (shuts down half the LEDs in emergency, low voltage conditions) Specifications: Power: 30 Watts, Voltage: 9-36 VDC, Lumens: 2,400, Weight: 10 oz, Dimensions: 4.2 x 4.2 x 1.5. Landing Light ............................... P./N 11-09351........................$384.00 36LX Taxi Light............................ P/N 11-09352.........................$389.95 They strongly recomend adding the Pro-tech lens coating which comes with a lifetime warranty on the lens for damage caused from rocks and debris.. ......................................... P/N 11-08143...........................$34.50
LED drop-in replacement for your existing GE4509, PAR36 aircraft lights. It comes with an integrated wig-wag or pulse feature built into the light that is recommended to be used throughout your flight to increase recogniton from other pilots. Landing light projects 45,000 candela using 45 Watts/3.75 AMPS max of power. Taxi light projects 15,000 candela. Power consumption: 45 watts Max; Current Draw at 12VDC: 3.75 Amps Max Available in taxi or landing lights. Clamp Mount: Par 36 Ring Clamp. Built in Wig/Wag (stand-alone or synchronous with any of our other products). Over-temp Sense Protection; ensures our 50,000 hour lifetime guarantee. Low-voltage Sense (shuts down half the LEDs in emergency, low voltage conditions) Specifications: Power: 45 watts, Voltage: 9-36 VDC, Lumens: 3,600 Weight: 10 oz, Dimensions: 4.2 x 4.2 x 1.5.PMA APPROVED Landing Light ............................... P/N 11-09353.........................$437.00 36HX Taxi Light ........................... P/N 11-09355.........................$489.95 They strongly recomend adding the Pro-tech lens coating which comes with a lifetime warranty on the lens for damage caused from rocks and debris. ......................................... P/N 11-08143...........................$34.50
The 1600 is a wing-mounted LED (Light Emitting Diode) landing light with a built-in wig wag mode in addition to its standard operation as a landing/ taxi light. Made from extruded aluminum, is a very intense light source that uses 8 high power LEDs to produce up to 1600 lumens of light using just 24 Watts of power. The product is ideal for closed or open environments. Each uses one fourth the power of an equivalent 100 Watt halogen light while producing as much usable light. The LED light sources last up to 50,000 hours of constant operation. The unit is completely sealed and is very rugged. The 1600 is protected against overheating with a built in protection circuit, is protected from lightning transients and ESD, voltage spikes, reverse voltage, and undervoltage conditions. For installation on experimental category airplanes. Sold each......................................................P/N 11-05797 ....... $324.95 Mounting Kit (Single) ....................................P/N 11-08144 ......... $19.95 Pro-Tech Lens Coat .....................................P/N 11-08143 ......... $34.50 An all LED navigation/strobe designed for the wingtip cutouts of an aircraft and project a 90 degree light coverage for the experimental market. NS90 does not require an external power supply and will retrofit the mounting footprint of legacy lighting. It is recommended that the SunTail be sold with the NS90 for aft position/strobe to enhance recognition. Specifications: Power: 10 Watts, Voltage: 9-36 Vdc, Weight: 4oz. P/N 11-08170 ................$759.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Power: 85 Watts . Voltage: 10-36 VDC. Lumens: 6,500+. Weight: 20 oz. Dimensions: 5.6 x 5.6 x 2.3. 46 Landing Light .......................... P/N 11-09347.........................$895.00 46 Taxi Light ................................ P/N 11-09350.........................$895.00 Over 17,000 lumens, drawing 224 watts. Allows the aircraft to be visible from 10 miles away, day and night. Specifications: Voltage Range: 15-36VDC, Current Draw at 28VDC: 8 Amps Max, Power Consumption: 224 Watts Max, Thermal Protection: Built In, Landing Lens Candela: 290,000+, Taxi Lens Candela: 105,000+ Landing Beam Angle: 10 Degrees Taxi, Beam Angle: 10 Deg up, 40 Left/Right, Total LED Lumens: 17,000+, LED Count: 8, Height: 8 Round, Width: 8 Round, Depth: 2.7, Weight: 35 Oz, Heat Sink Material: Black Anodized Aluminum, Lens Material: Polycarbonate, Clamp Mount Option: PAR 64 Ring Clamp, Rated Life: 50,000 Hours, Temperature Range: -55C to +70C. ..... P/N 11-09458 ..............$1,586.00 The 01-1200-A Sunbeacon B is an all LED red 360 degree beacon that exceeds 150 effective candela. It is suitable for mounting on the top or bottom of a fuselage, or on the vertical stabilizer to provide a highly visible red beacon that can be seen from any direction around the aircraft. Sunbeacon Red ........................... P/N 11-10475.........................$868.00 Sunbeacon White ........................ P/N 11-10476.........................$985.00 The MicroSun is a wing-mounted LED (Light Emitting Diode) landing light with a built-in wig wag mode in addition to its standard operation as a landing/taxi light. The MicroSun is a very intense light source that uses 12 high power LEDs to produce up to 1500+ lumens of light using 20 Watts of power. The MicroSun is equivalent to an AeroSUN 1600. P/N 11-07779 ..................$334.50 SunTail is designed to perform the tail position/strobe functionality on the rudder of the aircraft. The design addresses all the shortcomings of the existing line of competitive products and can synchronize its strobe with any of the AeroLEDs wingtip family of nav/strobe and nav/position/strobe products. Suntail does not require an external power supply and will retrofit the mounting footprint of legacy lighting. SunTail was intended to meet or exceed all of the FAA requirements for certification. White Experimental .......................... P/N 11-07781 ....................$369.00 Red Experimental ............................. P/N 11-10474 ....................$369.00 White Certified .................................. P/N 11-10479 ....................$464.95
An all LED navigation/strobe designed for the wingtips of an aircraft and projects 180 degree light coverage. NS180 does not require an external power supply and will retrofit the mounting footprint of legacy lighting. It is recommended that the Suntail be sold with the NS180 for aft position/strobe to enhance recognition. Power: 18 Watts. Voltage: 9-36 Vdc. Weight: 4oz Experimental...........................................P/N 11-08171 ..............$868.00 Certified ..................................................P/N 11-10477 ...........$1,079.00
An all LED navigation/position/strobe designed for the wingtips of an aircraft and project a 180 degree light coverage that exceeds 400 effective candela for the anti-collision light. NSP does not require an external power supply and will retrofit the mounting footprint of traditional legacy lighting. Experimental P/N 11-08172 ..............$895.00 Certified P/N 11-10478 ...........$1,122.00 All LED navigation/position/strobe designed for the wingtips of an aircraft and projects a 180 degree light coverage. ExP does not require an external power supply and will retrofit the mounting footprint of legacy lighting. Specifications: Voltage Range: 9-36VDC, Current Draw at 12VDC: 1 Amp Avg / 2.5 Amps Peak, Power Consumption: 13 Watts Avg, Strobe Power Supply: Built In, Strobe Synchronization: Built In, Thermal Protection: Built In, Position Light: FAR Compliant, Strobe: FAR Class 1 Equivalent, LED Count: 16, Length: 5.63, Width: 1.85, Depth: 1.3, Weight: 4 Oz, Heat Sink Material: Clear Anodized Aluminum, Lens Material: Polycarbonate, Screw Mount: 3x 6-32 Machine Screws, Rated Life: 50,000 Hours, Temperature Range: -55C to +70C ............................................... P/N 11-06577 ..................$849.95
AEROLEDS RV KITS
RV KIT OPTION 1:
Pulsar NS90 Pair (Nav/Strobe for wingtip cut out), SunTail (Position/Strobe). Requires NO POWER SUPPLY. P/N 11-09921 ...............$1,129.00
RV KIT OPTION 2:
Pulsar NS90 pair (Nav/Strobe for wingtip cut out), SunTail (Position/ Strobe), Two 1600s landing lights for the leading edge. Requires NO POWER SUPPLY. P/N 11-09922 ...............$1,695.00
RV KIT OPTION 3:
Pulsar NS90 pair (Nav/Strobe for wingtip cut out), SunTail (Position/ Strobe), Two Sunray Plus landing lights for wingtips. Requires NO POWER SUPPLY P/N 11-09923 ...............$1,595.00
RV KIT OPTION 4:
Pulsar ExP pair (Nav/Position/Strobe), Two 1600 landing lights for the leading edge. Requires NO POWER SUPPLY P/N 11-09924 ...............$1,395.00
563
BEACONS DIMMERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Made for easy installation to fit the tube that makes up the wing tip of most Ultralights. Powered by 12VDC and drawing only 1/3 amp each, these lights are just the thing for the Ultralight flyer that wants to add that special touch of position lights to his bird for those twilight flights. These easy to mount lights measure 1-3/8 x 4-3/8. Please note that these lights are NOT TSOd for VFR night flight...P/N 11-01356 ...........$36.75 This anti-collision flasher meets Part 103 ultralight dawn to dusk flying requirements. The units draw 2.7 amps at 14V (nominal). It has a clear Lexan Polycarbonate lens and a 35W halogen lamp. Mounting bracket shown is also included. P/N 10-01490 .............. $87.75
DC-POWERED FLASHER
ULTRALIGHT BEACONS
These miniature self-contained units use solid state circuitry for reliability and a lexan lens that is UV protected and shatter resistant for durability. Now available with an internally regulated flashing LED Lamp. .14 amps & 50,000 hr expected life. 12V DC power source required for both units. Wt. less than 7 oz. Size: 3 H x 2-5/8 W. For Experimental Aircraft Only Beacon, red lens ................. P/N 11-03008 .......$72.25
This self contained 14 Volt beacon uses surface mounted LED (Light Emitting Diode) technology and meets FAA requirements for anti-collision light systems in both airplane and rotorcraft categories. Measures 1.7 inches in diameter, 3.5 tall and weighs 8.4 oz. Average current draw at 14V is 0.6 Amps with peak input current of 1.2 Amps. Flash rate of 60 per minute and will not produce EMI or RFI interference. Aviation Red LEDs through a clear Polycarbonate Fresnel lens. Projected life for the LEDs is up to 100K hours. Mount with a #1032 stainless steel stud that is in the bottom center of the base. NOT TSOD P/N 11-05111 ................$233.95
The EA-1050 is designed for experimental aircraft. The microcontroller-based design is reliable, light-weight, consumes minimal current, and uses very little panel real estate. The industrial grade surface mount components used are shock/vibration resistant and provide a wide operating temperature range. The large red LED flashes for 60 seconds when alternator output voltage drops to 13V (normal output is ~14V). It then goes to continuous illumination until the condition is rectified. The flashing draws immediate attention to the condition -continuous illumination is not a pilot distraction thereafter. The voltage drop could be the result of an alternator malfunction or an overloaded system. Check by switching off a high load device, like landing light or strobes. If the ALT light goes off, the alternator is not malfunctioning but you are sourcing more voltage from your battery than the alternator is replacing. If the ALT light remains on, the alternator is malfunctioning and all non-essential electrical systems should be shut down immediately to conserve remaining battery voltage. The LED activates when the master switch is turned on and goes out after engine start, assuming the alternator side of the master is on and alternator output is normal. Observing this should be a checklist item, as it indicates that conditions are normal and the annunciator unit is functioning prior to flight. The flashing LED serves as a reminder to turn off the master switch after engine shutdown. Its also a helpful reminder to turn on the alternator switch after engine start (recommended starting procedure). The entire unit is less than 1 sq. in. x 0.5 deep. A drill template is provided for attaching the LED bezel unit to the panel. Complete installation and electrical connection instructions are also provided. P/N 11-02451...........................$89.95
The two dimmers include a single channel model. Both use pulse wave modulation, or PWM electronic design for precise control of LED lighting such as LED instrument panel lighting, baggage, utility, map or post lights. The self-contained products are designed for easy installation and feature integrated on/off switches on each rheostat. Rated at 18 Watts per dimmer channel, the dimmers are capable of operating a large number of interior lighting products and are engineered to provide additional over-current, over-voltage and reverse polarity protection. Single Channel Pilots Light Dimmer Single Channel Dimmer is ideal for LED Light Strips, General Panel Lighting or Series of Lights (such as map or baggage lights). The rotating control has its own on/ off switch. * 1.5A (18W) 12V dimmer using PWM (pulse wave modulation) for precise control * Integrated on/off switch and smooth action rotating control * Just 1.75 x 1.75 inches square. 1/4 shaft with high quality knob * Screw down terminals for input and output wiring. *Very easy to install. * Powerful enough to operate numerous panel lights and convenience lights * To install, drill 1/4 hole, wire input and output to screw terminals and install. 2-Channel Pilots Light Dimmer Dual Channel (2 channel) Dimmers can be used with any combination of lighting - Dual Color LED Light Strips or for controlling 2 different sets of lights. Each channel has its own ON/OFF switch and dimmer control. * Each channel controls 1.5A (18W) using pulse-wave modulation for precise control * Controls LED or incandescent lighting, up to 18W each channel * Dual integrated on/off switches and smooth action rotating control * Permits complete independent operation of each channel (on/off & dimming) * Just 2.5 x 1.75 inches square. Dual 1/4 shafts with push-on knobs * Screw down terminals for input and output wiring. *Very easy to install. * Powerful enough to operate numerous panel lights and convenience lights Specifications: * Mode of Operation: Continuously variable, pulse width modulation (PWM) * Supply Voltage: 8 to 20 VDC working voltage, up to 30VDC momentary. Dimmer must be fused at power source * Output Voltage Range: From zero VDC to supply voltage * Output Current Range: Up 1.5A * Max Continuous Output Current: Full rated current up to 105F (40C), 75% of rated current up to 115F (46C) * Ambient Temp Range: Minus 40F (-40C) to 115F (46C), with restriction as noted * Size: About 1-3/4 inch square * Weight: 30 to 40 gm, depending on wired connection type * Heat Sink: Electrically isolated from voltage and acts as a circuit enclosure. Max. temperature rise under load is about 40 F (22C) above ambient. Description Single Channel PWM Dimmer 12V Single Channel PWM Dimmer 24V Two Channel PWM Dimmer Part No. 11-06674 11-07286 11-06675 Price $33.75 $35.85 $48.50
Portable battery operated strobe which is an ideal addition to a pilot survival kit. Flash can be seen up to 3 miles and operates for 3-7 hours on AA batteries. It is impact & weather resistant; size: 3.5 on each triangular side; wt: 3.5oz. w/batteries. Includes storage pouch, belt/visor clip, magnet, & other attachment accessories. Furnished with clear dome. ....P/N 11-08200 .......... $19.95 Dome only (Price/ea.) Amber .... P/N 11-08205....... $3.50 Red .P/N 11-08210 ............ $3.50 Green..... P/N 11-08215....... $3.50 Blue .P/N 11-08220 ............ $3.50 Clear ...... P/N 11-08225....... $3.50 Black Bakelite knob. Fluted grip. brass bushing with set screw. in diameter x 7/16 high. Fits potentiometers for Superior Panel Technology dimmers. P/N 11-07344..............................$4.50
564
These lights work great in overhead consoles and tight spaces. 30 degree adjustable angle, 360 degree adjustable rotation. LED technology draws less current (40 mA max.) and last much longer, (20,000+ hours.) and are fully dimmable. The light is availabe in three light color version, two housing colors, and two voltages. The light colors are four red LED's, four white LED's, and two red/two white LEDS that can be lit separately with a SPDT switch (not included.) The housing colors are black or clear anodize. There are two voltages: 14 and 28. The light has a 1.45" flange and mounts in a 1.25" hole. The light requires 1" behind the mounting surface and is only 5/8" in front. It will accept up to 0.2" thick mounting surface. Model Description Body Part No. Price 1512R-14V 4 Red 14V L.E.D.s Alum. 11-07489 $112.95 1512R-28V 4 Red 28V L.E.D.s Alum. 11-07490 $110.95 1512W-14V 4 White 14V L.E.D.s Alum. 11-07491 $116.95 1512W-28V 4 White 28V L.E.D.s Alum. 11-07492 $108.95 1512RW-14V 2 Red 2 White 14V L.E.D.s Alum. 11-07493 $116.95 1512RW-28V 2 Red 2 White 28V L.E.D.s Alum. 11-07494 $116.95 1512R-14V 4 Red 14V L.E.D.s Black 11-07495 $108.50 1512R-28V 4 Red 28V L.E.D.s Black 11-07496 $110.95 1512W-14V 4 White 14V L.E.D.s Black 11-07497 $116.95 1512W-28V 4 White 28V L.E.D.s Black 11-07498 $116.95 1512RW-14V 2 Red 2 White 14V L.E.D.s Black 11-07499 $108.95 1512RW-28V 2 Red 2 White 28V L.E.D.s Black 11-07501 $116.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The body of the maplight is constructed of aircraft grade 6061 T6 aluminum and black anodize treated for protection from corrosion. The LED bulbs and internal components are high quality components, and are engineered to withstand 150% of their rated voltage without damage. The wire is tefzel coated mil-spec wire used in certified aircraft and the component potting material is a two part epoxy making this maplight highly vibration and shock resistant. The average bulb life of the LED used in this product in excess of 20,000 hours of use and the maplight draws only 20 milliamps of power with virtually no heat produced. The red LED used in this maplight gives the most light available in environments where night vision must be retained. This LED Maplight is built to be durable, simple to operate, lightweight and compatible with dimming systems. Each LED maplight is tested twice during production for maximum quality and customer satisfaction. The LED maplight is intended for use in Experimental, Amateur-Built aircraft only. MAPLIGHT I - 4 LEDS Color Voltage Part No. Price Red 12 11-04387 $51.85 Green 12 11-04388 $57.25 White 12 11-04389 $59.75 Red 24 11-04390 $57.85 Green 24 11-04391 $59.50 White 24 11-04392 $59.75 MAPLIGHT II - 6 LEDS Color Voltage Part No. Price Red 12 13-06620 $69.50 White 12 13-06621 $65.50 Blue 12 13-06622 $69.50 Green 12 13-06623 $69.00 Red 24 13-06624 $69.25 White 24 13-06625 $68.85 Blue 24 13-06626 $69.00 Green 24 13-06627 $69.00 MAPLIGHT II - 6 LEDS Dual Color White/Red 12 13-06628 $73.50 White/Blue 12 13-06629 $72.00 White/Green 12 13-06630 $69.95 White/Red 24 13-06631 $73.00 White/Blue 24 13-06632 $70.00 White/Green 24 13-06633 $56.75 Accessories Surface Mount Adapter SMA/MMII .............P/N 13-06651 ...........$15.50
LED MAPLIGHTS
Taxi Lights
HID Lighting provides the brightest illumination available. Increase Safety Increase Visibility 6X Brighter than Standard Lights 5000 Hour Bulb Life Reduce Heat & Power Consumption For Experimental Aircraft Only Only 35 Watts, Equivalent to 200 Shape Voltage Part No. Price Round 12V 11-05588 $568.00 Round 24V 11-05589 $568.00 Rectangle 12V 11-05590 $568.00 Rectangle 24V 11-05591 $568.00 Round 12V 11-05582 $568.00 Round 24V 11-05583 $568.00 Rectangle 12V 11-05584 $568.00 Rectangle 24V 11-05586 $568.00
Provides the most powerful flash circuitry available to the light-plane market. Computer-controlled design allows the pilot to select from several different flash patterns, sequencing four ultra-bright compact flash heads, alternating two pairs of flashes, or operating either two or four flash heads with either a fast double or quadruple flash. A powerful 60 joules of energy.. Operates from any 12-30 volt DC source. Current draw: 5.5 amps @ 12VDC Input power: 70 watts Output power: 60 watts System weight: 4 lbs Power pack size: 5 x 6 x 2 P/N SUPERNOVA ....$164.50
Kit consists of (2) GE #4509 12V, 100W sealed beam lamps, brackets for installation, switch, switch plate, 60 ft. of 2-conductor hookup wire & instructions. Size: 4.5hx5.25w x2.25d w/ bulbs installed. Complete Kit .......P/N 11-08000 ..$111.95 Replacement #4509 Bulbs P/N 11-03796 ....$13.80 Switch Plate only P/N 11-14900 ......$3.90
565
Designed for use in experimental aircraft, these LED lights are excellent for cabin lighting, work station lighting, interior lighting, or cargo space illumination. They feature small size (2 x 3), low power draw (less than 95ma, and weigh less than 3 ounces. the basic module consists of 3 rows of LEDs potted with epoxy in a strong plastic housing. This makes it extremely resistant to vibration and moisture. The modules are very efficient, and are available in 12 or 24V and in super bright white or red colors. Furnished with a diffused light pattern and a 3 ft. cable length. No on-off switch. Example Uses for These Convenient Lights Include: Cabin Lighting Work Station Lighting Interior Illumination of Work Area (Without Loss of Night Vision) Illumination of Operator Controls Cargo Space Illumination Benefits: Small Size - Only 2 x 3 Low Power Draw - Typically Less Than 95mA Customizable to Meet your Unique Needs Low Cost Weight is Less Than 3 Ounces 12V Red LED.........................................P/N 11-02880 .............. $104.95 24V Red LED.........................................P/N 11-02883 ................ $85.50
CABIN LIGHTS
Dimmable LEDs encased in a flexible resin strip. Identical to standard Flexible LED strips but with twice the LEDs. Permits independent control of the RED and White or Blue and White colors. Ideal for using White lights for loading/unloading or in cloudy conditions and MIX or use of colored lighting during dusk or night conditions.
INTERIOR CONVENIENCE AND MAP LED LIGHTING - Three very bright LEDs in an ABS housing.
Compact size, just 2 long. #4 holes for horizontal mountnig. 12 volts, low current draw (under 40 mA). Ideal for map lighting or utility installations Red .................... P/N 11-05527 ........ $7.95 Blue ................... P/N 11-09649 ........ $7.95 Green ................ P/N 11-09650 ........ $7.95
35 length, 3/8 width and 1mm high. Installs in minutes with doublesided tape Power consumption no greater than 160mA. Description P/N Price 12V Dual Flexible LED W001-Dual Red 11-05511 $49.90 12V Dual Flexible LED W001-Dual Blue 11-05512 $54.50 24V Dual Flexible LED W001-Dual Red 11-08410 $52.75 24V Dual Flexible LED W001-Dual Blue 11-08411 $49.90
Four (4) very bright LEDs. Compact size, just 1.5 long. #4 mounting holes 12 or 24 volts. Flood type wide area lighting. Ideal for map lighting, dome or utility installations. Black or Chrome Base.. Chrome Base only comes in White and Red 12V. For exprimental aircraft only Case Light Volt Part No. Price Volts Part No. Price Black White 12V 11-09651 $7.95 24V 11-09654 $7.95 Black Red 12V ----24V 11-09655 $7.95 Black Green 12V 11-09652 $7.95 24V ----Black Blue 12V 11-09653 --24V 11-09656 $7.95 Chrome Red 12V 11-05526 $7.90 24V -----
For production aircraft OR experimental aircraft The same quality Dimmable LEDs as our standard Flexible LED instrument Lights but with a Cigarette Lighter plug and in-line dimmer control Ideal for non-permanent installation in aircraft and other vehicles Power is supplied by the Cigarette Lighter plug (12 Volt systems only) In-line dimmer controls lighting level Available in Red, White or Blue LEDs. Ideal for mounting under glare shields for instrument panel lighting Can be trimmed every 2-1/2 inches (every 3 LEDs) Easy-to-install, waterproof, shockproof and require no inverter to operate. Draws only 83 mA, 12 volts DC, and has a service life of over 10,000 hours LED is 35 length, 3/8 width and 1mm high. Description P/N Price Flexible LED With Cigarette Lighter W003- CLA Red 11-05513 $43.50 Flexible LED With Cigarette Lighter W003- CLA White 11-05514 $43.50 Flexible LED With Cigarette Lighter W003- CLA Blue 11-05515 $43.75 Flexible LED Cigarette Lighter Dimmer Kit only 11-05516 $9.95 The BattPack Battery Backup System can be used as an emergency/secondary power source for aircraft lighting. The 14V or 28V system will provide up to one hour or more of lighting for the FiberLite instrument lighting system (that uses LEDs light sources) or the Glow Strip (electroluminescent lamp) glare shield lighting system or for other low current draw lighting such internally lighted instruments. The system includes the battery holders, a three position switch (normal, off, emergency), engraved placard and tefzel hook up wire. 14V - BP12V...........P/N 11-06595 .................$47.85 28V - BP24V...........P/N 11-06596 .................$57.85
566
Emits blue LED light from both sides. Poly Carbonate, Poly Crystalline Silicon fixture. Maintenance Free. LED Visibility over 1/2 mile. Nickel Metal Hydride Batteries. Secures to asphalt or concrete w/2 part epoxy. Approximately: 4 x 4 x . Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. Blue BSL05DTW ............... P/N 11-09385.............. $39.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Emits green LED light from both sides. Poly Carbonate, Poly Crystalline Silicon. Maintenance Free. LED visibility over 1/2 mile Nickel Metal Hydride Batteries Secured to asphalt or concrete w/epoxy. Approximately: 4 x 4 x . Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. Green BSL-05DCL ............ P/N 11-09394.............. $39.95
Emits Green/Red LED light. Poly Carbonate, Poly Crystalline Silicon. Maintenance Free LED visibility over 1/2 mile Nickel Metal Hydride Batteries Secures to asphalt or concrete w/epoxy. Approximately: 4 x 4 x . Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. Green BSL-05DTH............ P/N 11-09387.................. 2.95
Applications: anywhere high-intensity task lighting or map lighting is needed. Features: Bright Gooseneck LED fixtures with 1 Watt LED, Powerful, dimmable and No RF Interference Heavy-duty construction, Beam dispersion 60 degrees, Includes mounting hardware, Dimensions: Length: 11 (base to top); Flexible shaft length is 8.75. Head is 2; Width: 0.75 inches (at head), 12 Volt DC, very low power drain (0.15 mA). On/Off switch optional. 12V White LED with switch ............. P/N 11-09281.............. $37.50 12V Red LED with switch................ P/N 11-09282.............. $44.75 12V White LED with out switch ....... P/N 11-09283.............. $33.95 12V Red LED with out switch ......... P/N 11-09284.............. $42.75
Emits White LED light from both sides. Poly Carbonate, Poly Crystalline Silicon. Maintenance Free. LED visibility over 1/2 mil. Nickel Metal Hydride Batteries Secured with 2 part epoxy Approximately: 4 x 4 x . Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. White BSL-05DEL ............. P/N 11-09386.............. $39.95
Surface mount convenience light. 2 Bright LEDs behind a frosted panel. Surface mount with hardware. Dimensions: 2.5 x 1.25 x 5/8. #6 mounting holes. 12 Volt DC or 24 Volt DC, very low power drain (0.1mA). Applications: foot wells, door panels, side panels, map light, chart lights or anywhere a dimmable, bright LED light is needed. Part No. Price Volts Part No. Price 11-09255 $11.90 24V 11-09258 $11.90 11-09256 $11.90 24V 11-09259 $11.90 11-09640 $11.90 24V 11-09641 $11.90 11-09257 $11.90 24V 11-09261 $11.90
Emits Red LED light from one single side. Poly Carbonate, Poly Crystalline Silicon. Maintenance Free Nickel Metal Hydride Batteries. Secures with 2 part epoxy. Approximately: 4 x 4 X . Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. Red BSL03AOM ............... P/N 11-09389.............. $35.95
Applications: Side panels, overhead consoles, door panels, exterior application (waterproof) Features: Bright LED fixtures with Watt LEDs Powerful & Dimmable, Installs in a 3/4 hole with self-locking nut, Designed for overhead consoles or side panels, Mounts in panels up to 3/4 thickness Dimensions: 1.25 length x 1 top flange; mounts in 3/4 diameter hole; depth is just 1 1/8; installed flush height is 1/8 Fresnel lens and clear plastic housing Waterproof and vibration resistant 12 Volt DC, very low power drain (0.1 mA) 12V White ............. P/N 11-09278 ............ $8.95 12V Red ................ P/N 11-09279 ............ $9.50 12V Blue ............... P/N 11-09280 ............ $9.50
Emits light from all sides. Poly Crystalline Silicon, ABS Plastic. Super Bright Red LED light. Mounted to post or pipe. Approximately: 9 diameter x 6 height. Designed to withstand 20 tons PSI. Built for extreme weather conditions. Three (3) to five (5) year life span, Maintenance FREE Batteries charge in approximately four (4) hours using the suns energy. Operate all night (8 or more hours on a full charge). LED brightness equates to 35 lumens. Red Beacon VRH-4704 .... P/N 11-09384.............. $47.95
The Adhesive Epoxy Pads are a non toxic, zero V.O.C., performance thermoplastic adhesive designed to adhere raised pavement markers to the concrete or asphalt surface. When heated with a propane heat torch, a Pad liquefies and fuses with the surface and the marker providing a bond that will last throughout the markers lifetime. Size: 5 x 5. P/N 13-10451................ $4.00
567
Description AK-551-LD-S 1 POT 6AMP 0-28V AK-551-LD-S 1 POT 12AMP 0-14V AK-551-LD-S 1 POT 12AMP 0-28V AK-551-LD-S 1 POT 18AMP 0-14V AK-551-LD-S 1 POT 18AMP 0-28V AK-551-LD-S 1 POT 24AMP 0-14V AK-551-LD-S 1 POT 24AMP 0-14V AK-551-LD-D 2 POT 12AMP 0-14V AK-551-LD-D 2 POT 12-AMP 0-28V AK-551-LD-D 2 POT 24AMP 0-14V AK-551-LD-D 2 POT 24AMP 0-28V AK-551-LD-Q 4 POT 24AMP 0-14V AK-551-LD-Q 4 POT 24AMP 0-28V AK-551-LD-O 8 POT 24AMP 0-14V AK-551-LD-O 8 POT 24AMP 0-28V
Part No. 11-06228 11-06229 11-06230 11-06231 11-06232 11-06233 11-06234 11-06235 11-06236 11-06237 11-06238 11-06239 11-06240 11-06241 11-06242
Price $100.00 $196.95 $196.95 $292.95 $292.95 $364.00 $364.00 $185.00 $185.00 $364.00 $364.00 $364.00 $364.00 $713.00 $713.00
The CLA 500 is a Multiple Circuit, Solid State Cockpit Lighting Assembly that will accommodate (4) independent dimmer lighting circuits such as instruments, sub panels, avionics, eyebrow, overhead, flood, and post lamps etc. The CLA 500 unit itself measures 5l x 4.7w x 1.5h; wt: 0.8 lbs. The unit is rated at 14/28VDC input at 2.5 amps max per circuit. The CLA 500 comes complete with 4 on/off dimmer control switches and connector assembly.The CLA 500 carries a full 1 yr factory warranty. Not TSOD P/N 11-05700(14v) ................... $259.00 P/N 11-04592(28v) ................... $254.95
COCKPIT LIGHTS
11-06003
Economical solution for the dimming of aircraft interior lighting. This heavy-duty solid state dimming kit by Superior Panel Technology includes a potentiometer with built-in off switch and 115W power transistor mounted to a heat sink. The supplied colored Mil Spec wire and very easy to follow wiring diagram allows the aircraft builder to customize the wiring harness to fit individual needs. When compared to rheostats, this unit provides more even dimming when a combination of LEDs, incandescent bulbs and electroluminescent lamps (such as SPTs Glow Strips) are used. Appropriate for both 14V and 28V systems. Knob sold separately ........................................P/N 11-00846 ..............$67.95 Control Knob ...........................................P/N 11-07344 .................$4.50
MOD1 OVERHEAD CONSOLE - The Mod1 Overhead Console is mounted to top of cabin or top wing skin with four stainless steel screws into the four standoffs or posts on Console. All lights are ordered separately. Weight: 3.8 oz. P/N 11-06003 ..............$27.65
MINIATURE EYEBALL COCKPIT LIGHTS - A compact, low current draw, (now all LED), lightweight light for instrument panel, chart reading, or baggage area illumination. The MOD1 Cockpit Light is available in three models: Soft White W - (viewing sectl. charts) Red R (for total area night vision protection) Green G 11-07800 - (well adapted for Night Vision Goggles). A black acrylic ball with aperture rotates in a rugged 1.5 diameter ABS body for full swivel adjustment. Mounts with three black screws included.Originally used on Voyagers around the world flight. White .......................... P/N 11-07800 ..............$18.75 Red ............................. P/N 11-03141 ..............$18.75 Green ......................... P/N 11-08480 ..............$18.75
These high quality cockpit lights are engineered to match the eyeball swivel vents on the page on Air Vents in this catalog. Simple twist on/off operation provides white beam for cockpit lighting. Made from 2024T351 aluminum. Diameter: 2.75. Has 4 mounting holes (1/8dia.) which are spaced 2-3/8 apart on a mounting plate with a thickness of .71. Made in USA. Black (no bulb) .......... P/N 05-01401.......... $68.85 Gray (no bulb) ........... P/N 05-01402.......... $68.85 Order 14V or 28V 14V............................ P/N 11-04197............ $1.29 bulb separately 28V............................ P/N 11-04172............ $3.25
The A200-DDC Intensity Controller will support up to ten instruments in a single installation. It provides infinitely variable, uniform intensity control for all instruments. These units are TSO qualified with all 200 Series instruments and is STCd as a primary replacement instrument component under all flight conditions (day/night VFR and IFR). DC Power Source: Input voltage 6 to 36 VDC. Power consumption 250mA (maximum brightness). P/N 10-04809 ...........................$110.95
Red, Blue and Green lights independently dimmable with emergency battery that automatically operates in case of total power failure at the same adjustment. Attached with Velco in any position and connected to the power with cigarette lighter cord (provided), or directly connected to the harness in the vehicle with a fuse of 2 Amp in line. The combination of the 3 colors creates the perception of white light. Measurements: 2.36x1.58x1.22. Input Power: 12 volts to 28 volts. Warranty: One year warranty parts and labor in the factory P/N 11-06482 ...........................$189.00
568
DIMMERS
Kit includes a Mil.Spec Potentiometer, Mil. Spec Power transistor mounted to a heatsink and a wiring harness. Breaker Size: 2A @ 14V, 1.5A @ 28V, Operating Range: 0-32 VDC, Current: 1.4A@ 14V, .7A@28V, Power: 20W .... P/N 11-02082 ..........$153.95
5-35 VDC 0-12.5A Control 350 Watts in a 1-1/4 Diameter package. Complete compact, light weight, powerful, solid state dimmer. Great for light wedges. FAA STC Approved. PMAd . Features: Aircraft Lighting Boat Cruiser Cabins. Instrument Panels. Hundreds of DC Lighting Control applications P/N 11-05738.............. $214.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
These high-quality rheostats are used in production aircraft to dim instrument panel lights. Size: 1-9/16 dia. x 2-1/4 long. Mounts in 3/8 dia. panel hole. Shaft is 1/4 dia. w/flat for knob set screw. New manufacture. Power Rating: 25 Watts. 0-8 OHM Panel light dimming retrostat P/N 0144 .............................................$32.85 0-15 OHM Panel light dimming retrostat P/N 0146 .............................................$46.75
Extreme long life, low temperature operation, high current capability, noise free operation and small size makes it a ideal landing light controller for all aircraft. This new STC version sports eight functional pulse, flash and steady state modes of operation. It is also an ideal replacement for old technology controllers requiring large heavy heat sinks and or noisy relays as part of the installation. STCd .................................................... P/N 11-06998.............. $239.00 NON-STCd ........................................... P/N 11-05737.............. $245.95
Finger grip knob or rheostats. 1-1/2 Diameter, 1/4 Hole. P/N 11-07967 .............$9.65
12-35 volts @ 10 Amps per channel - 2 channels, Ring Connectors, Controlled Output: 0 to 12-35 VDC , 0 to 10 A per channel. No outboard heat sinks, rheostats, or other packages. STC, PMA, RTCA/DO-160E SEC 21: qualified. Configure for Wig Wag or Wing and taxi light pulsing, single light pulsing etc. Increased safety for your passengers and yourself. Hundreds of DC Lighting Applications. Emergency Vehicles. Assembled in the USA P/N 11-08175.............. $239.00
Choose from 2, 3, or 4-circuit heavy-duty 115W light dimming systems by Superior Panel Technology. Circuit board design with pin connector allows for easy and neat wiring. Mil Spec Tefzel color-coded wire is included.. Unlike rheostats, this system will provide even dimming of incandescent lights, electroluminescent lamps (such as the SPT Glow Strips) and LEDS when used in combination on the same circuit. A separate control switch (with circuit breaking off position) is included for each circuit. Knobs sold separately. 2 Circuit .....................P/N 11-02046 .........$119.00 3 Circuit .....................P/N 11-02047 .........$211.95 4 Circuit .....................P/N 11-02049 .........$249.95 Control Knob .............P/N 11-07344 .............$4.50
Specifications: 5-35 volts @ 15 Amps. Ring Connectors. Controlled Output:. 0 to 5-35 VDC - 0 to 15 A Capacity: 75 Watts @5 VDC. 180 Watts @12 VDC. 360 Watts @24 VDC. 420 Watts @28 VDC. 700 Watts @35 VDC Features: Aircraft Lighting. Comply to Cessna AD 93-24-15 about cockpit fires. We have the AMOC allowing this installation for the MaxDim.. Excellent control of Nulite instrument lighting. Excellent LED control. Smaller DC motors. STC, PMA, RTCA/DO-160E SEC 21: RFE Qualified. Instrument Panels. Nulite dimmers. UMA pre-inverter dimmer. Avion Glare shield pre-inverter dimmer. Boat Cruiser Cabins. LED lit panels. Hundreds of DC Lighting Control applications. Assembled in the USA. Includes: MaxDim unit, installation instructions, color coded terminals, reference panel label, STC printout for your logs, installation template, and knob. ............................... P/N 11-08176.............. $239.95
12 to 35 VDC, 0-15 A per channel, Control 1050 Watts In a 1-1/4 Inch Diameter Package. Complete compact, light weight, powerful, solid state dimmer. ......................................... P/N 11-08177.............. $324.00 Features: 3 outputs with a tracking capability - One output is the Master, and the other two can be set to track the master from 0 to any set voltage behind the master. This allows items on the dimmer bus to be grouped according to their relative brightness. Photocell light sensor automatic control capability Low cost Performance: Voltage range: 0 to Input supply - .6V Output current - Depends on ventilation - Each channel is capable of 5 amps, practical dissipation limitation is ~ 5 amps total for all channels. (For 28 volt systems, current limit is 1 A per channel) Unit connections are made through a DB15 connector, and are easy to integrate into the rest of the aircraft wiring. P/N 11-02244 .......................... $149.95
For Complete info on Dimmers and MaxDim Mini Control Units please visit our website at www.aircraftspruce.com
Single Channel, complete, compact, light weight, powerful, solid state dimmer. 5 to 35 VDC, 0-5 A per channel, control over 175 watts channel in a .85 inch square by 3 package. Applications and features: Aircraft instrument panel lighting. Excellent control of Nulite instrument lighting. Smaller DC motors. Instrument Panels. Nulite dimmers. UMA dimmer. Avion Glare shield dimmer. Boat Cruiser Cabins. LED lit panels, Excellent LED control. Hundreds of DC Lighting Control applications. Included: MaxDim Mini unit. Installation instructions. Color coded terminals. Reference panel label. STC pending printout for your logs. Installation template. Knobs. Single Dimmer Control .......................... P/N 11-09753.............. $197.50 Dual Dimmer Control ............................. P/N 11-09752.............. $286.00
569
INSTRUMENT LIGHTING
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Dimensions 0.5W x 25L 0.5W x 25L 1.5W x 18L 1.5W x 18L The UMA EL Light Bezel System replaces instrument post-lights, provides a uniform light around the dial of each instrument using a solidstate electro-luminescent element rather than a incandescent bulb. The bezels have a design life of 5,000 operating hours. The system consists of a bezel or wedge, DC to AC inverter, and a connector kit. The bezel fits over the instrument face, and is available in a variety of configurations to accommodate various adjusting knobs. The bezel mounts either between the instrument face and the panel, or between the panel and the overlay. The bezel is held in place by the instrument mounting screws. The DC to AC inverter provides power for as many as 12 bezels or about 25 sq. inches of lighting. To facilitate installation and maintenance a connector kit is supplied with each bezel. Colors are White, Aviation Green, and red, with white being the only FAA approved color. The PMA is based on a STC for Beechcraft King Air 90s. To assist you in filing a FAA form 337, the approved data package used for the King Air installation is available from UMA, or can be downloaded on or website. Copies of previously issued 337s are available upon request. * Inverter is required. Must be ordered separately. Model No. Size 2-30-W 2-30-G 2-30-R 2-31-W 2-31-G 2-31-R 2-33-W 2-33-G 2-33-R 2-34-W 2-34-G 2-34-R 2-35-W 2-20-W 2-20-G 2-20-R 2-21-W 2-21-G Cut-Out Light Part No. Price
3-1/8 SINGLE (Left or right) WHITE 10-00794 $52.50 3-1/8 SINGLE (Left or right) GREEN 10-02089 $49.95 3-1/8 SINGLE (Left or right) 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 NONE NONE NONE CENTER CENTER CENTER DOUBLE DOUBLE DOUBLE RED 2-30-R $51.75 $51.85 $49.95 $51.75 $49.95 $61.25 $59.95 WHITE 2-31-W RED 2-31-R
FiberLites, by Superior Panel Technology, offers an innovative FAA approved instrument and label lighting system that uses fiber optics to evenly illuminate aircraft instruments with easily accessible, long lasting, LED light sources. Fiber-optics are affixed to specially designed bezels that are sandwiched between the instrument and the panel for appearance of an internally lighted instrument. The advantages of using FiberLites over other lighting devices are a) easier wiring, three LED light sources will light up all the instruments on most panels b) the LEDs are very long lasting, however, if they ever do need to be replaced, they are easily replaced without having to remove any instruments c) FiberLites provide even 360 degree lighting around the instrument, d) the instrument is not altered in any way e) FiberLites can be used to backlight printed labels. The following items are included in the FiberLite package. a) Three LED light sources with appropriate resistor (must specify 14 or 28V system). b) Eight 3 1/8 instrument bezels c) You can substitute TWO 2 inch bezels for each 3 1/8 inch instrument light. For example a package could consist of SIX 3 1/8 and FOUR 2 instrument lights. Bezels come in 3 sizes (3 1/8 standard with four screw holes (FL318), 3 1/8 with cut-out in corner that can be rotated either for a right or left hand cut-out (FL318CO) and the 2 bezel with four screw holes (FL214). Please specify the bezel sizes, and quantity and the voltage of the aircraft.The Superior Panel Technologys Pulse-Width Modulation Dimmer is recommended for dimming the LEDs. Optional 14V or 28V battery back-up systems are available and recommended. See Accessories. Aircraft spruce and spt have worked together to offer a discount on the fiberlites and pwm dimmer when ordered as a package. 3 LED Package ..................................... P/N 11-04009 .....$254.95 3 LED Package with PWM Dimmer ...... P/N 11-10601 .....$349.95 Individual Parts Pricing:
2-1/4 inst. ................................................. P/N 3-1/8 inst. ................................................. P/N 3-1/8 inst w/cut out................................... P/N 14V LED Light Source .............................. P/N 28V LED Light Source .............................. P/N Solid State Dimming Kit ............................ P/N Battery Back Up 14V................................. P/N Battery Back Up 28V................................. P/N 11-04000..........$26.95 11-04002..........$26.95 11-04003..........$26.95 11-03998............ $2.25 11-04001............ $3.10 11-00846..........$67.95 11-06595..........$47.85 11-06596..........$57.85
2-1/4 SINGLE (Left or Right) WHITE 10-00792 $52.50 2-1/4 SINGLE (Left or Right) GREEN 10-02087 $49.95 2-1/4 SINGLE (Left or Right) 2-1/4 2-1/4 NONE NONE RED 2-20-R $49.95 $51.85 WHITE 2-21-W
2-21-R 2-1/4 NONE RED 10-00793 $49.95 INVERTERS FOR UMA LIGHTING 5V (JETS) ................ P/N 10-02086............$56.25 14V........................... P/N 10-02083............$56.85 28V........................... P/N 10-00986............$56.85 Each inverter will run up to 12 lighting wedges. Rheostat................... P/N 6002 ...................$21.85 Elec. Wire Kit* .......... P/N 10-02085..............$8.75 *Contains AMP connector and connecting pins
UMA, Inc. now offers an ultra-thin (0.006) flexible self-adhesive long-life light strip based on the same technology that is used in our EL Light Bezel. Since there is no filament, these light strips are not bothered by vibration or rapid changes in temperature. Perfect for use under a glare shield, or for any other interior lighting need (both aircraft and automotive). Length may be cut as needed. Available colors are Aviation Green & White/Blue. Power Inverter required. Color Part No. Price White/Blue 10-00321 $56.85 Aviation Green 10-00322 $56.25 White/Blue 10-00323 $76.25 Aviation Green 10-00324 $76.25
Backlight the lettering on reverse engraved panels using FiberLites fiber-optic panels. The panels can be cut to width and normally one fiber-optic panel can illuminate all the text for switches and breakers on a panel. The fiber-optic panels are 3 x 8.5 and come with the needed connectors and three LEDS (either green or white). The panels can also be used as mini flood lights over breakers and switches. Fiber-Optic Back Light Kit Green ..................P/N 11-08561 ........$149.95 Fiber-Optic Back Light Kit White...................P/N 11-08562 ........$149.95
570
Superior Panel Technology has developed a brighter, more uniform and longer lasting Glare Shield lighting system. The 18 x 1 Glow Strip electroluminescent lamps provide a beautiful fluorescent-like aviation green or a white light output. The ultra-thin lamps (.065 including the adhesive backing) are very flexible and conform to the curves of the underside of the glare shield. The Glow Strips meet the FAA 23.853 burn test. Inverters ARE included with the kit. A solid state dimmer and battery back-up system is available and recommended (see part numbers below). THE ONLY MANUFACTURER THAT OFFERS A LIFETIME WARRANTY AGAINST LAMP FAILURE. Green Single Glow Strip - 14V ...............................P/N 11-00847 .........$119.50 Two Glow Strips - 14V ................................P/N 11-00848 .........$159.50 Two Glow Strips - 28V ................................P/N 11-00849 .........$159.50 White Single Glow Strip - 14V ...............................P/N 11-10525 .........$119.50 Two Glow Strips - 14V ................................P/N 11-10528 .........$159.50 Two Glow Strips - 28V ................................P/N 11-10529 .........$159.50 Accessories Solid State Dimmer .....................................P/N 11-00846 ...........$67.95 BattPack Battery Backup 14V - BP12V ......P/N 11-06595 ...........$47.85 BattPack Battery Backup 28V - BP24V ......P/N 11-06596 ...........$57.85 Pilot Light Pro serves two main functions. It provides hands free panel lighting, as well as map lighting. using the latest in LED technologies it delivers 19 hours of continuous use. Pilot Light Pro is delivered with two AA Procell 1500 batteries installed, and may also optionally be installed using ships power. The internal circuit board will cut off the internal battery source once ships power is turned on. Loss of ships power will return the unit back to it's battery source, leaving you with light to work by in the advent of any problem i.e. loss of alternator. Quick Installation: Installation is quick and easy if using battery only option, simply peel and stick using 3M power lock. The panel light is fully adjustable see our web site for installation instructions. Wiring to ship's power will require a Licensed A&P and a 337 Form, field approval may be required by local Fisdo. Blue ................................................ P/N 11-07819 ......................$124.95 Red ................................................. P/N 11-07836 ......................$124.95 Green.............................................. P/N 11-07837 ......................$124.95 For those who lack mounting space for Pilot Light Pro, or simple just want Map Lights. Map Light Pro uses the same AA Procell 1500 batteries and yields 24 hours of continuous use. P/N 11-07820 ........................$74.95
CM WP ME HA AP LG EP CS IN EL
P/N 11-07953
P/N 11-07954
P/N 11-07952
P/N 11-07955
AV TO PS BV
LIGHTSAVER
An "airfield in a suitcase" solution. A fast-deployed, 40 light kit of our Landing Strip Light. Used for expeditionary, improvised or temporary airfields. Suitable for a 4,000' runway, if placed at typical 200' intervals (max.). Order multiple kits for longer runways. Operators Liability- The system has been designed to be operated under normal visual meteorological conditions for night flying by a pilot with normal vision. The system is utilized at the operator's discretion and risk. The suppliers accept no liability whatsoever whether implied or explicit for any incidents/accidents that may incur. The operator must ensure that trained personnel operate the system and are made fully aware of aviation safety and that the runway remains clear of animals, pedestrians and obstructions at all times during landings and takeoffs. Only competent and currently night rated pilots may use this system. Use by student pilots training for night rating is prohibited. Landing Strip Light Kit - 40 light basic kit, packed in a Pelican 1660 wheeled equipment case for ease of storage, handling, and set up. 180 lb. (82 kg) per kit. Description Part No. Price Landing Strip Light Kit with 40 Lights 11-07953 $4,248.00 Landing Strip Light Kit Jr. with 10 Lights 11-07954 $925.00 Landing Strip/Runway Light - Not available for sale to European Union at this time, not 11-07952 $112.00 RoHS compliant. Helicopter Landing Zone Light Kit - includes a rugged case, five strobes with bases, pace- 11-07955 $593.00 out line, instruction manual and safety guides.
571
11-04408 $388.95
11-04625 $386.95
XeVision super bright Xenon metal halide arc discharge landing & taxi lights for experimental aircraft. Light so bright and white youd swear its daylight; 500,00 candle power (3200 lumens) for our 35 Watt and more than 750,000 candle power (5400 lumens) for our 50 Watt systems up to more than 8 times brighter than a standard 100 watt incandescent sealed beam. High HID efficiency means less than half the current draw and about of the radiated heat of standard or Halogen lamps. XeVision offers reliable HID pulsing capability based on the proprietary XeStrike series ballasts and the patented XePulse and new XePulse II pulsing module. All XeVision HID lighting systems are tested up to 100,000 feet altitude. XeVision systems are warranted up to 35,000 feet for continuous fail-safe operation. XeVision offers retrofit kits for direct replacement or complete lighting system kits for new aircraft installation, different lamp shapes/sizes available. Many installation locations are possible now with a variety of lamp shapes and sizes, extremely small form factor, and lower lamp housing temperatures. They are especially suited for tight spaces in composite aircraft. XeVision reflectors are made of metal, not plastic. High Intensity Discharge (HID) lighting is the most significant breakthrough in aviation lighting since the development of modern sealed beam lamps. XeVision offers highest quality at a very competitive price with a 5 year warranty and up to 3,000 hour typical lamp life. XeVision HID aviation lighting systems are DO-160E certified (35,50, and 75 watt models) The XeStrike proprietary ballasts XV1D or XV4D are an integral part of all XeVision aircraft lighting systems with the following features: 12 or 24 VDC voltage input., Designed for pulsing or dimming of HID Xenon bulbs with the XePulse HID control module., Designed for 35 watt or 50 watt output, 75 watt for special applications only., Extremely low EMI/RFI in combination with third generation D1S bulbs with integrated igniter and double shielded silicone cables., Digital power control for pre-programmable start-up algorithm. XeVision conversion kit & components XeVision XV-36-SL Standard landing light conversion kit . With XV1D or XV4D ballast and D1S bulb. XV-36-SL 35 Watt XV-36-SL 50 Watt XeVision XV-36-ST Standard taxi light conversion kit . XV1D or XV4D ballast and D1S bulb. XV-36-ST 35 Watt XV-36-ST 50 Watt XeVision XV-46-SL Landing light conversion kit . XV1D or XV4D ballast and D1S bulb. XV-46-SL 35 Watt XV-46-SL 50 Watt XV-46-ST - Taxi light conversion kit. XeVision XV-46-ST taxi light conversion kit XV1D or XV4D ballast and D1S bulb. XV-46-ST 35 Watt XV-46-ST 50 Watt XV-22 - Landing or taxi light for external use like gear struts. XV1D or XV4D ballast and D1S bulb. XV-22 35 Watt XV-22 50 Watt XV-23 - Landing or taxi light in wing area or externally as on a gear structure. With XV1D or XV4D ballast and D1S bulb. XV-23 35 Watt XV-23 50 Watt Key features & other information Beam angle 9 horizontal & vertical. PAR 36 size. Preferred Application - PAR 36 conversion, lamp diameter 4-5/16 P/N 11-01760 $468.95 P/N 11-05038 $521.00 Beam angle 55 horizontal & 10 vertical. Preferred Application - PAR 36 conversion, lamp diameter 4-5/16 P/N 11-01761 $468.95 P/N 11-05037 $516.00 Beam angle 10 horizontal & vertical. Preferred Application - PAR 46 conversion, lamp diameter 5-11/16 P/N 11-01762 $468.95 P/N 11-05204 $516.00 Beam angle 50 horizontal & 8 vertical. Preferred Application - PAR 46 conversion, lamp diameter 5-11/16 P/N 11-01763 $468.95 P/N 11-05208 $516.00 15 horizontal & 10 vertical. Landing/taxi light conversion designations Preferred Application - Lamp fixture, rectangular, only 2.25 high 4.7 wide, and 4.2 deep. P/N 11-01765 $467.95 P/N 11-05209 $516.00 20 horizontal & 8 vertical. Preferred Application - Lamp fixture, rectangular, only 2.25 high 4.7 wide, and 4.2 deep. P/N 11-01764 $467.95 P/N 11-05210 $516.00
11-05124 $221.95
Pulselite For General Aviation Aircraft. Solid state unit unit pulses two 125-watt channels or one 250-watt channel. The Pulselite System is designed to increase your aircraft's conspicuity. It pulses up to two 125-watt landing, taxi or recognition lights in patterns that create an illusion of exaggerated motion. Your aircraft becomes more visible for miles, even in fog or smog. P/N 11-17514 ...................$259.00
Increase the visibility of your aircraft and give yourself that extra margin of safety. This solid state flashing system alternately flashes your landing lights so pilots in other aircraft and controllers in the tower will be able to see our aircraft much easier. The flasher unit extends the life of your landing lights since they run much cooler and its easy to install by following the comprehensive installation instructions. One toggle switch is added to the panel, giving you the option to switch the lights from the flashing mode to the landing mode. Choose the flashing unit based on the wattage of bulb used in the aircraft. For 14V systems only FOR EXPERIMENTAL AIRCRAFT ONLY. 50W bulbs................. P/N 11-02070 ...............$139.95 100W bulbs............... P/N 11-02071 ...............$169.95
572
REPLACEMENT LAMPS
Our long life incandescent and halogen lamps offer greater light output with increased life and reduced costs. All lamps feature heavy filament construction. Improved design and manufacturing techniques produce a lamp far superior in service with lower cost to the user and packaging provides maximum protection in shipping, handling and storage.
Universal 12V125W 24V150W U303 U327 U330 U387 U1163 U1512 U1524 U1687 U1940 U1982-SP UA-7079B-12 UA-7079B-24 UA-7512-12 UA-7512-24 Grimes Whelen Gen. Electric GE-303 GE-327 GE-330 GE-387 Cessna C17312-3 303 327 330 Piper Aeroflash 40-0028 40-0003 Our P/N 040-0028 040-0003 11-01948 11-01949 11-01950 11-01951 11-01953 11-01954 11-01955 11-01956 11-01958 11-01960 11-01962 11-01963 11-01964 11-01965 Price $19.50 $22.00 $3.10 $0.65 $0.53 $0.54 $12.75 $16.75 $17.75 $12.75 $10.75 $25.85 $21.85 $21.85 $16.75 $16.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
11-01954 11-01955
11-01964
040-0028 040-0003
11-01965
11-01962
11-01963 11-01958
11631 1512 1512 1524 1524 1687 1940 WRM-1940 GE-1940 1940 LP-1982SP GE-1982SP 761-214 1-7079B-12 A-7079B-12 A-7079B-24 A-7079B-24 A-7512-12 W1290-14 A-7512-12 A-7512-24 W1290-28 A-7512-24 753-478
This flash tube replaces Grimes P/Ns 30-0467, 30-1467, 30-1331, 30-1172-5, & 30-0515 series. Used on many Cessna aircraft. W55-0221-1 ..............P/N 11-02780 .......... $65.25
Replace burnt out Grain of Wheat Bulbs that are used to illuminate many instrument panels & instruments. These blue-white silicone booted lamps are filtered for illuminating integrally white-lighted aircraft instruments and panels as called out in MIL-L-27160. Available in 14/28V. 14V........... P/N 11-02052......... $4.95 28V........... P/N 11-02053......... $5.00
Replaces miniature lamps: # 328, 345, 350, 7335 (5/6V), 330, 382, 394 (12/14V), 327, 376, 387 (24/28V) P/N 11-09629 ................$7.50
Replaces miniature lamp: # 6MB, 44, 47, 755, 1302, 1847 (5/6v); 12MB, 57, 386,756, 1445, 1815, 1889, 1893 (12/14v); 1437, 24MB (24V); 28MB, 313, 757, 1819, 1829 (28V); 48MB (48V); 60MB, 1835 (60V); 120MB, NE51H, 967 (120VAC); 130MB (130V) P/N 11-09628 ................$7.50
Parmetheus PAR36/46 LED lights are a drop-in replacement for outdated Halogen lamps. PMA Approved, lightweight, low-current and moisture resistant, they provide stable light output for thousands of operating hours. LED lighting is the ideal technology for aviation applications. Whelen LED lights are time and field-tested for reliability and long-life performance under the tough conditions required by Fire, Emergency, DOT and Law Enforcement professionals around the world. PMA Approved LED PAR 36 Landing Light 28V ...................P/N 11-08292 ........$229.00 LED PAR 36 Taxi Light 28V .........................P/N 11-08293 ........$229.00 LED PAR 36 Landing Light 14V ...................P/N 11-08294 ........$229.95 LED PAR 36 Taxi Light 14V .........................P/N 11-08295 ........$239.00 LED PAR 46 Landing Light 14V ...................P/N 11-09523 ........$239.00 LED PAR 46 Landing Light 28V ...................P/N 11-09524 ........$269.00
Drop-in replacement for traditional incandescent lights. The Teledyne LED Alphabeam Landing & Taxi light will replace the following incandescent replacement lamps: 4313, 4509, 4591, 4594, 4596. Features: FAA PMA Approved Draws less power Longer life than incandescent bulbs Ruggedized for shock and vibration Meets applicable DO-160 environmental requirements Reduced maintenance costs Specifications: Lamp type: PAR 36 LED Technology 45W 12 30 VDC MBCP: 170,000 4.5 Bulb Diameter 2.75 Max Overall Length P/N 11-08459 ..............$285.00
573
GE REPLACEMENT LAMPS
MINIATURE LAMPS FOR COCKPIT/WING/TAIL LIGHTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Lamp No. Primary/Application B-31/2 Bulb 7/16 (11mm) Diameter GE-PR2 Flashlight-2D Cells GE-PR3 Flashlight-3D Cells GE-PR6 Flashlight-2D Cells GE-PR7 Flashlight-3D Cells GE-PR12 Flashlight-5D Cells GE-PR18 Flashlight-6D Cells B-6 Bulb 3/4 (19mm) Diameter GE-1308 Reading Light GE-1309 Aircraft Interior GE-1317 Emergency Landing G-31/2 Bulb 7/16 (11mm) Diameter GE-356 Map Light GE-1450 Indicator G-41/2 Bulb 9/16 (14mm) Diameter GE-55 Panel Indicator GE-57 Panel Indicator GE-425 Lantern-4F Cells GE-456 Instrument G-5 Bulb 5/8 (16mm) Diameter GE-302 Aircraft GE-1315 Emergency Lighting G-6 Bulb 3/4 (19mm) Diameter GE-81 Wing/Tail GE-303 Cockpit Light GE-304 Cockpit Light GE-623 Aircraft - 2 Filaments GE-1251 Aircraft - 2 Filaments GE-1252 Aircraft - 2 Filaments S-8 Bulb 1 (25mm) Diameter GE-305 Wing/Tail GE-305AF Wing/Tail-All Frosted GE-306 Wing/Tail GE-307 Wing/Tail GE-308 Wing/Tail GE-315 Wing/Tail GE-705 Aircraft GE-1619 Instrument GE-1665 Aircraft GE-1665AF Aircraft - All Frosted GE-1680 Wing/Tail GE-1691 Aircraft - 2 Filaments GE-1692 Marine - 2 Filaments GE-1777 Aircraft Tail Light GE-2232 Spiral Lead GE-2233 Spiral Lead S-11 Bulb 1-3/8 (35mm) Diameter GE-309 Aircraft GE-311 Wing/Tail T-1 Bulb 1/8 (3mm) Diameter GE-685 Aircraft GE-718AS15 Aircraft - 1 Filament T-13/4 Bulb 7/32 (5.5mm) Diameter GE-85 Indicator
Volts Amps/Watts 2.38 3.57 2.47 3.70 5.95 7.20 28 28 6 28 24 7 14 5 28 28 2.5 6.5 28 28 28 28 28 28 28 28 28 28 28 28 6 28 28 6 28 28 12.8 28 28 28 28 5.0 5.0 28 .50A .50A .30A .30A .50A .55A .56A .52A .51A 17A .035A 2 CP 2 CP .50A .17A .17A 1.0A 1.02A .30A .30A .37A .23A .23A .51A .51A .51A .67A .67A .90A .51A 4.1A .80A .80A 4.1A .61A .61A 1.52A 6.43A .766A .90A 1.29A .06A .115A .04A
11-03076 $2.35 11-04162 $3.85 11-03075 $3.35 11-04184 $3.65 11-03077 $7.25 11-04194 11-04195 11-03079 11-03080 $1.49 $0.88 $2.45 $1.15
11-03038 $4.15 11-03037 $3.35 11-04196 11-04172 11-04173 11-03041 11-03039 11-03040 11-04174 11-03027 11-04175 11-04176 11-04177 11-04180 11-03028 11-03025 11-03034 11-03035 11-04165 11-03029 11-03030 11-04014 11-03031 11-03033 $2.90 $3.25 $3.20 $1.75 $0.93 $4.25 $3.90 $3.10 $4.95 $3.45 $1.29 $3.95 $4.35 $3.95 $3.90 $3.25 $2.65 $8.25 $8.75 $6.95 $1.95 $2.40
11-03036 $4.95 11-04178 $3.95 11-03042 $1.18 11-03043 $1.63 11-03044 $2.30
Lamp No. Primary/Application Volts Amps/Watts Part No. GE-327 Eyebrow/Post Lt. 28 .04A 11-04015 GE-328 Panel Indicator 6 .20A 11-04181 GE-330 Eyebrow/Post Lt. 14 .08A 11-04016 GE-334 Panel Indicator 28 .04A 11-04182 GE-387 Panel Indicator 28 .04A 11-04185 GE-388 Panel Indicator 28 .04A 11-03045 T-21/4 Bulb 9/32 (7.5mm) Diameter GE-786 Emergency-Halogen 6 2.0A 11-03046 T-3 Bulb 3/8 (9.5mm) Diameter GE-1978X Navigation 10 100W 11-03047 GE-1982 Navigation 28 75W 11-03048 T-31/4 Bulb 13/32 (10mm) Diameter GE-43 Indicator 2.5 .50A 11-03049 GE-44 Panel Indicator 6.3 .25A 11-04186 GE-316 Instrument 6 .70A 11-03050 GE-400 Aircraft 28 .10A 11-03054 GE-757 Indicator 28 .08A 11-03053 GE-1813 Wing/Tail-All Frosted 14.4 .10A 11-04166 GE-1815 Indicator 14.0 .20A 11-03052 GE-1816 Map/Dome Light 13 .33A 11-04167 GE-1818 Panel Indicator 24 .17A 11-04168 GE-1819 Panel Indicator 28 .04A 11-04169 GE-1820 Panel Indicator 28 .10A 11-04170 GE-1873 Aircraft 28 .17A 11-03056 GE-464 Aircraft 28 .17A 11-03055 GE-1864 Panel Indicator 28 .17A 11-04171 T-4 Bulb 1/2 (13mm) Diameter GE-1986 Navigation 28 250W 11-03058 GE-1987 Navigation 28 150W 11-03057 T-5 Bulb 5/8 (16mm) Diameter Electric Discharge Lamps GE-1978X Navigation 10 100W 11-03047 GE-1982 Navigation 28 75W 11-03048 GE-5004CW Cool White A.C. 4W 11-03060 GE-5004WW Warm White A.C. 4W 11-03061 GE-5008CW Cool White A.C. 8W 11-03063 GE-5008WW Warm White A.C. 8W 11-03064 GE-5013CW Cool White A.C. 13W 11-03066 GE-5013WW Warm White A.C. 13W 11-03067 GE-5104WW Warm White A.C. 4W 11-03062 GE-5108WW Warm White A.C. 8W 11-03065 GE-5113WW Warm White A.C. 13W 11-03068 T-7 Bulb 7/8 (20mm) Diameter GE-1940 Rotating Beacon 14 3.57A 11-03794 Cockpit & Wing/Tail Lights GE-53 Panel Indicator 14.4 1 CP 11-04193 GE-67 Clock, tail, cargo area 13.5 8 11-01394 GE-89 Cockpit Light 13 6 CP 11-04197 GE-93 Wing/Tail 12.8 15 CP 11-04199 GE-94 Wing/Tail 12.8 15 CP 11-04200 GE-313 Cockpit Light 28 .17A 11-04179 GE-336 Post Light 14 .08A 11-04183 GE-356 Map Light 28 17A 11-04184 GE-1073 Illuminator Lights 12.8 1.80A 11-04012 GE-1141 Wing/Tail 12.8 1.44A 11-04161 GE-1495 Panel Indicator 28 .30A 11-04164
Price $0.88 $1.40 $1.35 $1.22 $0.96 $1.19 $7.60 $22.30 $20.25 $1.65 $0.97 $4.35 $1.84 $1.46 $1.81 $1.37 $1.58 $2.60 $1.58 $1.65 $5.60 $1.55 $1.66 $69.75 $31.75 $22.30 $20.25 $7.35 $7.35 $7.05 $7.05 $6.00 $7.95 $5.35 $6.85 $6.90 $12.75 $0.99 $1.59 $1.29 $2.60 $3.45 $1.85 $0.88 $3.65 $2.60 $1.25 $3.15
P/N 11-03796
Lamp No. Primary/Application Volts Amps/Watts Part No. PAR36 Bulb 41/2 (114mm) Diameter GE-4509 Landing Spotlamp 13 100W 11-03796 GE-4595 Navigation 13 100W 11-03081 GE-Q4509 Landing 13 100W 11-03902 GE-4313 Landing 13 250W 11-03795 GE-Q4631 Landing 13 250W 11-03083 GE-4505 Navigation 28 50W 11-04188 GE-4589 Cockpit Flood 28 50W 11-03084 GE-4593 In-Air Refueling 28 50W 11-03085 GE-4591 Landing 28 100W 11-03802 GE-4594 Navigation 28 100W 11-03803 GE4627 Flood 28 100W 11-03088 GE-4713 Logo 28 150W 11-03089 GE-4587 Taxiing 28 250W 11-03090 GE-4596 Landing 28 250W 11-03806 GEH-7604 Landing Spotlamp 12.8 50W 11-04023 PAR46 Bulb 53/4 (146mm) Diameter GE-4551 Taxiing 28 250W 11-03093
The 4509Q lamp is a direct replacement for the standard 4509 lamp. While the amps & wattage are the same, the rated design life of the 4509Q is 4 times longer (100 hrs. vs. 25 hrs.) and 4509Q has nearly double the candlepower and narrower beam disbursement. Galaxy 4509Q Landing Light Bulb .................P/N 11-02220 ............$19.65 Galaxy 4509 Landing Light Bulb ....................P/N 11-02219 ..............$7.95
574
CM WP ME HA AP
Advantage Avionics specializes in avionics installations and upgrades. Whether you want to upgrade an instrument, install a complete IFR radio stack, have a plug and play experimental panel built, or have an entertainment system installed, they can do it all. They can manufacture new panels for your older aircraft and make it look like it just rolled out of the factory. They know that every pilot and aircraft owner has different need and wants, and thats why their recommendations and installations are tailored to each and every customer. From conventional panel layouts to full glass cockpits, and simple radio installations to full IFR radio packages, just about any dream can become a reality at Advantage Avionics. Come visit their facility at Chino airport (KCNO) and take a look around while enjoying a fresh cup of coffee. We invite you to see how they take care of you and your aircraft to provide the best service possible. They want to earn your business with true professionalism, honesty, and a comfortable experience.
LG
The Aircraft Spruce and Specialty Panel Builder allows you to plan your panel without having to search all over the internet and keep track of all your findings. Using drop down menus, you can easily search our large inventory of avionics & instruments by category.This tool displays every piece of equipment you will need for your panel, enabling you to get quotes quickly and simplify the ordering process. Your data can be saved so you can build your panel at your own convenience. If you need a complete custom panel built for your aircraft, Aircraft Spruce is your best choice for best quality and lowest cost. Contact our Avionics Sales Manager for a quote on your new panel at; ryandeck@aircraftspruce.com.
EP CS IN EL
RV Panel
Lancair Panel
AV TO PS
Pulsar Panel
Velocity Panel
BV
IMPORTANT NOTICE
Aircraft Spruce & Specialty Co. cannot accept a return of any instrument or avionics equipment that has been installed and/or altered in any way. All returns must include all components and accessories and all original packaging. All returns must be in new, saleable condition. Credit or replacement will be issued at our discretion pending inspection and testing by the manufacturer. Warranty repairs can be sent directly to the manufacturer with a copy of our invoice.
575
aera 510 adds support for NEXRAD imaging and other great XM WX satellite weather capabili- 11-08045 ties. It also comes with detailed terrain mapping, $1,099.00 Garmins patented Panel page, preloaded street Americas maps and touchscreen control. aera 550 With higher-resolution 9 arc-second terrain graphics, offers detailed aviation and automotive mapping with preloaded SafeTaxi charts and AOPA Airport Directory. Also includes built-in support for premium auto navigation and traffic features. 11-08046 $1,249.00 Americas 11-08052 $1,099.00 Pacific 11-08051 $1,099.00 Atlantic
aera 560 Garmins premiere fly/drive touchscreen portable, with support for XM WX satellite weather capabilities. It also comes with preloaded 11-08047 SafeTaxi charts, AOPA Airport Directory, City Americas $1,599.00 Navigator NT street mapping, and support for premium auto features.
With its 3D Vision navigation technology, advanced electronic flight bag capabilities, XM Weather capabilities and much more, the touchscreen aera 796 ushers in the next era of aviation portables Revolutionary new 3D Vision technology shows a virtual 3-D behind-the-aircraft perspective of surrounding terrain derived from GPS and the onboard terrain database a feature previously only available in our panel-mount avionics. Simply slide your finger across the touchscreen to rotate the view and show land and water features, obstacles, runways and airport signposts in relative proximity to the aircraft. Internal GPS provides position updates at a rate of 5 times per second (5 Hz). aera 796s bright 7 diagonal high-definition sunlight-readable display makes detailed mapping easy to see in any lighting conditions and works in both portrait and landscape mode. The physical design has been optimized to fit on the yoke or for use as a knee-mounted device. There are only 4 touch keys on the bezel representing Back, Menu, Direct-to and Nearest for quick navigation to the most frequent used functions. All other functions are quickly accessed through Intuitive onscreen icons with labels. This unique touchscreen interface even allows you to quickly pan across the map screen and pinch to zoom. Fullfills the role of either a Class I or Class II electronic flight bag, greatly reducing the need to rely on paper charts in the cockpit. Initial georeferenced VFR sectional and IRF enroute charts come preloaded that show your aircrafts position overlaid directly on the relevant chart. When in IFR map mode, the 796 can display victor airways, jet routes, minimum enroute altitudes and leg distance, much like whats found on traditional enroute charts. A scratch pad feature also allows you to quickly jot down clearances and other pertinent notes while in route, while a checklist viewer allows you to create customized and interactive electronic checklists. Also allows for a top-down view of your entire route. To help you navigate around unfamiliar airports, SafeTaxi provides detailed taxiway diagrams and position information for over 1,000 U.S. airports, while a private airport and heliport database greatly expands your emergency nearest options. FBO, ground transportation, lodging and other facility information for most U.S. airports are also available through preloaded AOPA Airport Directory Data; international pilots may choose to opt for global AC-U-KWIK airport directory data instead. A GXM 40 smart antenna is included with aera 796, giving you access to high-resolution weather and audio entertainment right in the cockpit (XM subscription required). XM WX Satellite Weather includes next generation radar (NEXRAD), aviation routine weather reports (METARs), terminal aerodrome forecasts (TAFs), temporary flight restrictions (TFRs), lightning, winds aloft and more for the U.S. and Canada. In addition, the 796 can receive PIREPs, turbulence forecasts, icing forecasts and more. The weather data can be laid directly over the units navigation and topographic map databases. Plus, with 170+ channels of digital music, news and programming through your aircraft headset or cabin audio system, youll stay informed and entertained. Allows for simultaneous connectivity with other hardware. With an optional Garmin GTX 330 Mode S Transponder Interface, you can access Traffic Information Service (TIS) alerts, where available, right on the device while also sending frequencies to a Garmin SL30/40 radio or relaying position reports to other devices. aera 795 Americas ................................. P/N 11-10034..........$2,199.00 Accessories 795/796 Power Data Cable 795/796 AC Power Home Dock 795/796 Carry Case Part No. 11-10044 11-10045 11-10046 Price $59.95 $139.50 $46.95 aera 796 Americas with XM Weather ......... P/N 11-10033 .......$2,499.00 Accessories 795/796 Battery Pack 795/796 Lap Mount Touchscreen Clean Cloth Part No. 11-10047 11-10048 11-10049 Price $187.95 $46.95 $4.75
576
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Price $21.95 $42.95 $149.95 $28.50 $51.75 $27.50 $44.95 $74.50 $294.00 $7.25 $234.95 $33.85 Price $17.85 $32.85 $12.95 $24.75 $12.95 $159.95 $105.95 $19.95 $13.95 $34.95 $74.95 Price
Part No.
11-10724 $899.00 11-10725 $899.00 11-10726 $899.00 11-10727 $899.00 11-10728 $799.00 11-10729 $899.00 11-10730 $899.00 11-10732 $100.00 11-10733 $100.00 11-10734 $100.00 11-10735 $100.00 11-10736 $100.00 11-10737 $129.00
The GDL 39 portable ADS-B receiver combines a dual-link ADS-B receiver and a GPS receiver into a single unit that streams ADS-B traffic and subscription-free weather to Garmin aviation portables, iPads and a wide array of other mobile devices. The GDL 39 provides wireless support for the aera 796/795 and compatible mobile devices, such as the iPad, via built-in Bluetooth connection. Other Garmin portables including the GPSMAP 696/695 and the aera 500 series can connect to the GDL 39 with a single cable.
577
Full-featured GPS navigation with Jeppesen database and comprehensive towers-and-obstacles database. Users can quickly download and store map data from a variety of optional MapSource CDROMs. Whether on land, sea, or air, the GPSMAP 96C is the smart, versatile way to get there: Extensive Jeppesen database includes airports, identifiers and services Comprehensive U.S. database of obstacles and towers helps alert pilots of potential hazards Graphic HSI steering cues with GPS-derived VNAV provide added orientation Built-in autoroute basemap and optional MapSource marine, topo & city street mapping downloads let you move seamlessly from plane to car to boat to hiking boots. Features: Unit dimensions: 2.7W x 6.2H x 1.4D, Weight: 7 ounces, Display size: 3.0 diagonally, Display resolution: 180x240pixel, four-level gray FSTN display, Usable storage capacity: 23 MB, Battery life: Up to 25 hours in battery save mode, Antenna: Quad-helix, WAAS capability: WAAS GPS receiver for enhanced lateral/vertical guidance, Waterproof:(submersible in one meter of water for up to 30 mins.), Routes, Tracks, Waypoints: 50 reversible routes (300 waypoints each), 20 saved tracks (500 trackpoints each), TracBack technology and 1,000 waypoints with graphical icon identification. GPSMap 96C Americas Color ....................P/N 11-02820 .........$495.00 GPSMap 96C Atlantic Color........................P/N 11-02827 .........$495.00 GPSMap 96C Pacific Color .........................P/N 11-02828 .........$495.00
Navigate worry-free anywhere you go with the waterproof, impact-resistant PN-60w. Its high-end GPS features and unrivaled selection of included maps, aerial imagery, and boating charts are ideally suited for use on land or water. The PN-60w also enables 2-way satellite text messaging and interactive SOS when paired with a DeLorme inReach (see accessories). No other GPS offers such a broad array of navigation and communication solutions. Features: Enjoy blazing-fast-performance with high-sensitivity 32-channel chipset and dual-core processor. Daylight readable 65k color screen lets you read the PN-60w in any light conditions. Determine direction while stationary with tilt-compensated 3-axis electronic compass. Determine precise elevations with sensitive barometric altimeter. Save waypoints and tracks as .gpx files, to internal memory or to SD cards, with no maximum limits. Store all the maps and aerial imagery you need with 3.5 GB of internal memory and support for SD cards up to 32 GB. Extend battery life with power management features. Box Includes: Earthmate PN-60w GPS, Topo North America 9.0, Free MapPack Subscription, Quick Start Guide, 2 lithium AA batteries, USB data-transfer cable for PC-GPS data exchanges, 5 regional discs of pre-cut PN-Series maps, and Sturdy lanyard. P/N 11-10450 ................ $349.95
Use the inReach satellite communicator by itself and stay connected with pre-loaded text messages, delivery confirmation, SOS, and remote tracking. Or, pair inReach with a PN-60w (see accessories) for exclusive twoway messaging and reliable GPS navigation. Features: Two-way satellite messaging. Interactive SOS. Message delivery confirmation. Pole-to-pole global coverage. inReach users can communicate directly with one other to share information and locations. You can also post messages to Facebook and Twitter and enable remote tracking so others can follow your travel online. Box Includes: inReach for PN-60w GPS, Quick Start Guide, Micro USB cable, 2 lithium AA batteries, and Lanyard. For Earthmate GPS ............................ P/N 11-10449 ................ $249.95 For Android Phones ........................... P/N 11-10448 ................ $249.95
Trade-in only applies towards a purchase of a new Garmin unit listed below (one unit per trade-in). Trade-in must be complete, having all accessories, and the unit must be in good cosmetic and working condition. Any unit not meeting this requirement can receive a lesser trade-in value or have the unit returned. 1. Purchase a new GPSMAP 695, 696, or Aera 500, 510, 550, 560. 2. At the time of order, our sales representatives will give you your customer number and order number to use when sending in your trade-in unit. 3. Once you receive your new Garmin unit, please call our customer service number at 800-861-3192 and reference your customer number and order number to receive an RMA to ship your trade-in to Aircraft Spruce and Specialty. 4. After we receive your trade-in, we will verify that the unit is complete and in good cosmetic and working condition. Once verified we will credit you the trade-in value. Units with missing accessories will add delay to the credit process. GPSMAP 496..............................................$900.00 GPSMAP 495..............................................$750.00 GPSMAP 396..............................................$650.00 GPSMAP 296..............................................$500.00 GPSMAP 196..............................................$200.00
*Verify current trade-in values at time of order by calling 877-477-7823 or email us at info@aircraftspruce.com. We will beat any other suppliers price on any unit. Aircraft Spruce no longer accepts the Pilot III, 90 Series, 195 or 295 for trade.
Used Garmin GPS units are subject to availability. Please call 877-477-7823 for availability and current prices. Used Used Used Used Used Used Used Garmin Garmin Garmin Garmin Garmin Garmin Garmin Description GPSMAP 196 GPSMAP 296 GPSMAP 396 GPSMAP 495 GPSMAP 496 GPSMAP 695 GPSMAP 696 Part No. 11-02713 11-03593 11-04737 11-07063 11-07064 11-10051 11-10050 Price $350.00 $650.00 $895.00 $995.00 $1,195.00 $1,250.00 $1,399.00
578
Now youve got a choice. The quick reference books feature easy-to-use tabbed pages for concise procedures and navigation help in a compact size, prefect for someone who wants complete information or is new to a system. The cards provide all the essential information in a 5 x 8 full-color, hard plastic card for those who are already familiar with their system. Either way, Qref keeps you in the know, quickly and easily.
GPS Model Garmin aera GPSMAP 195 GPSMAP 196 GPSMAP 295 GPSMAP 296 GPSMAP 396 GPSMAP 495 GPSMAP 496 GPSMAP 696/695 GMX200 GNS 430 GNS 480/CNX80 GNS 530/430 G1000 Card G1000 non WAAS G1000 WAAS Garmin Cirrus AIRMAP 2000C AIRMAP 600C AV8OR AV8OR Ace GEOPILOT II EKP-II EKP KLN 89B KLN 90B KLN 94 KLN GX Series Avidyne Entegra version 3-5 Avidyne Entegra version 6-7 Card P/N 13-07064 13-06355 13-06356 13-06357 13-06360 13-06362 13-06362 13-06362 13-06363 13-06353 --13-06418 13-06354 13-06417 ------13-06365 13-06364 13-06348 13-07066 13-06347 13-06322 13-06368 13-06367 13-06366 13-06369 ----Price $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 --$13.95 $13.95 $13.95 ------$13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $13.95 $17.25 ----Book P/N 13-07063 13-06291 13-06292 13-06293 13-06294 13-06295 13-06313 13-06315 13-06316 --13-06288 13-06289 13-06290 --13-06423 13-06424 13-06425 13-06317 13-06318 13-06287 13-07065 13-06286 13-06285 ------13-06422 --13-06358 13-06359 Price $27.95 $19.95 $19.95 $24.95 $24.95 $29.95 $21.95 $25.95 $27.85 --$29.95 $29.95 $29.95 --$48.95 $48.95 $48.95 $21.75 $16.95 $29.95 $28.95 $24.95 $29.95 ------$23.95 --$48.95 $48.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
GARMIN SAFENAV
Make trip planning simple for your next outdoor adventure with MapSource Trip and Waypoint Manager. This computer software allows you to transfer waypoints, routes and tracks between your Garmin device and your computer. For reference, Trip and Waypoint Manager provides general worldwide maps that include interstates, motorways, political boundaries, principal cities and towns, oceans and other general reference details to place your GPS data in context. Provides basic worldwide maps to help you understand your GPS data in context, including major interstates, boundaries, oceans, principal cities and towns, and other general reference details. Offers an easy and convenient way to archive your GPS data for future use. Does not contain detailed maps. You cannot use this product to load maps to your Garmin device. P/N 11-02703 .............................$22.95 Features a rugged, touchscreen along with a built-in basemap with shaded relief, a high-sensitivity receiver, barometric altimeter, electronic compass, microSD card slot, picture viewer and more. Even exchange tracks, waypoints, routes and geocaches wirelessly between similar units. Touch and Go - A tough, 3-inch diagonal, sunlightreadable, color, touchscreen display. Durable and waterproof, it is built to withstand the elements. Share your waypoints, tracks, routes and geocaches wirelessly other Oregon and Colorado users. Supports Geocaching.com GPX files for downloading geocaches and details straight to your unit. Locates your position quickly and precisely and maintains its GPS location even in heavy cover and deep canyons.Built-in electronic compass that provides bearing information even while youre standing still, and its barometric altimeter tracks changes in pressure to pinpoint your precise altitude. P/N 11-07247 ...........................$499.99 The Aviation Suite FlightPad 10 is a full-featured touch-screen GPS offering moving map over VFR Sectionals, Terminal Procedure Publications and detailed information on over 19,000 airports. In addition the FlightPad 10 contains a 17-function E6B, graphical weight & balance calculator and NNumber lookup. Coverage includes United States, Puerto Rico, Virgin Islands, and Pacific Territories. Purchase Includes: Aviation Suite FlightPad 10, AC Power Adapter, 12 Volt DC Power Adapter, External GPS Antenna. Size: 10.5 x 6.6 x 0.4. Weight: 1.6lb. Aviation Suite FlightPad 10 ..................P/N 11-10417 ....................$499.95 Aviation Suite Renewal 1 Year ...........P/N 11-10418 ....................$99.99
The Jeppesen Training CDS let pilots learn at their own pace, practicing procedures at the comfort and safety of a computer desktop, rather than flying heads-down. Easily and quickly get the users familiar with operations by using a visual hands-on approach.
Part No. 11-02442-1 11-02848-1 11-04514-1 11-04766 13-05646 11-04767 Price $52.25 $43.75 $79.50 $69.95 $139.95 $41.75
Description Jeppesen GPSMAP 196 Interactive Jeppesen GPSMAP 296 Interactive Jeppesen GPSMAP 396 Interactive Jeppesen GPSMAP 496 Training CD JS202402 JEPP 430W/530W WAAS CD Jeppesen Weight & Balance Graphic Planner CD
Pilot-friendly manuals are available for most receivers. Our task-oriented manuals are simplified directions that lead you step-by-step through all the GPS operations. Includes descriptions of all pages.
Description G1000W WAAS Manual G1000W WAAS Ebook Manual GNS-430W WAAS Manual GNS-430 Guidebook GNS 430W with Memory Jogger GNS-530 Guidebook G1000 Guidebook GPSMAP 295 Learn How to Use Your GPS 496 GPSMAP 695/696 Manual GPSMAP 695/696 Ebook Manual GPSMAP 695/696 Guidebook GPSMAP 496 Guidebook GPSMAP 396 Guidebook GPSMAP 296 Guidebook GPSMAP 296 Owners Manual GPSMAP 196 Guidebook Garmin G300 Manual Garmin G300 Ebook Manual Garmin G900X Manual Garmin G900X Ebook Manual Bendix/King KLN-90B Guidebook Bendix/King KLN-900 Guidebook Bendix/King KLN-90B/900 Guidebook Bendix/King KLN-89B/94 Guidebook Part No. 13-05694 13-09879 13-05129 11-04307 13-11587 11-04308 11-04309 11-04310 11-05024 11-07937 13-09880 11-07937 11-05581 11-04311 11-04312 11-02698 11-04313 11-09130 13-09877 11-09093 13-09878 11-04303 11-04304 11-04305 11-04306 Price $49.95 $49.45 $39.95 $49.50 $29.95 $39.95 $39.95 $37.95 $74.95 $35.75 $35.95 $35.75 $35.75 $40.00 $36.75 $24.95 $36.75 $49.95 $35.95 $54.95 $49.25 $39.95 $45.00 $45.00 $39.95
GPS MANUALS
This is not your typical "Cook Book" approach to learning the GNS430/530W. The manual contains 62 pages of text and dozens of colored pictures, the same pictures you would see in real-life when operating the unit. Written by Keith Thomassen. P/N 13-06831 ..........$52.95
579
GPS PROTECTORS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Pre-cut navigation screen protectors provide excellent protection from scratches. The antiglare layer reduces unwanted reflections, increasing contrast, clarity, and viewing comfort even with the use of polarized lenses. This film is thick enough to protect the screen, yet thin enough to have no effect on touch screen sensitivity. Light tack adhesion provides for residue-free removal. Does not require special cleaners. Available for: ADR, Anywhere Map, Avidyne, Apollo, Chelton, Eclipse Avio, Garmin, King, Vista Nav, and more. Description Flight Bag NAV Map LS-800 CNX-80 Aspen EFD PRO 1 pc. Avidyne 2 pc. Avidyne 5 pc. Piper Models 1pc FlightMax 500 1pc Chelton IDU 4 pc. 2G-430 4 pc. 2G-430 2PC C-P 3PC Eclipse Avio 1PC G-1000 1 pc AV8OR 2PC G-1000 3PC G-1000 Garmin 430 Garmin 480 Garmin G600/G500 Garmin 696 Garmin aera GMX-20 GMX-200 196,296,396,496 KMD 250 King KMD550 CIS-1000 AV8OR Ace Part No. 11-07140 11-07141 11-07142 11-07143 11-07144 11-07145 11-07146 11-07147 11-07148 11-07149 11-07150 11-07151 11-07152 11-07153 11-08214 11-07154 11-07155 11-07157 11-07158 11-07161 11-09441 11-08217 11-07163 11-07164 11-07165 11-07166 11-07167 11-07168 11-08216 Price $21.25 $22.25 $13.50 $16.50 $28.75 $48.00 $72.00 $14.50 $16.50 $43.25 $57.75 $57.75 $96.00 $34.75 $14.85 $48.00 $81.75 $12.95 $13.95 $31.75 $18.75 $14.85 $16.50 $17.50 $13.95 $12.50 $14.95 $22.25 $18.75
Clear-Nav is the aviation version of transparent GPS antennas using the design, development and manufacture of technologically advanced antenna systems for wireless applications. Features: Flick the GPS antenna from your dash-board, or the from the air-stream. Easy to install on plexi-glass, lexan or perspex windshields (Code X77P) .... also works well when installed on the inside of fiberglass upper fuselage (for glass version please ask for Code X77G). UV resistant and virtually damage proof once it is installed. The supplied high quality RG174 thin (1/8") coaxial cable is easy to route around frame(s) and cabin linings. Specifications: Radiator: 2 x half-wave dipole 90 degrees phase shift(RHCP when Installed with adhesive side to sky), Antenna Gain: (Passive) 3dBi, LNA Gain: (Active) 27dB, System Gain: 30dB = Antenna + LNA, VSWR: < 1.2:1 @ Band center LNA Operating Voltage: +3 ~ +5v, Connector: MCX For Garmin 296, 396, 496, 430, 530 .........P/N 11-08586 .............$69.95 For Garmin 696 .........................................P/N 11-08536 .............$69.95
Designed, tested, and assembled entirely in the USA. Although it was developed and tested for many hours in Piper Aircraft and with a variety of Garmin GPS products including the brand new Garmin AERA line; it may be adapted to other applications and GPS units due to the utilization of a universal mounting plate and the ability of the windshield post clamp to fit any post size from 7/16 inch to 5/8 inch. This mount may also be permanently mounted in experimential aircraft. Note: It may be necessary to relocate the Magnetic compass in some aircraft if it is installed too close to the top of the glare shield. P/N 11-08297 ................$62.50
The pre-cut Navishield screen protectors provide excellent protection from scratches. The anti-glare layer reduces unwanted reflections, increasing contrast, clarity, and viewing comfort even with the use of polarized lenses. This film is thick enough to protect the screen, yet thin enough to have no effect on touch screen sensitivity. Light tack adhesion provides for residue-free removal. These EZCLEAR products meet Garmin G1000 Pilot Guide specs for cleaning and is safe to use on glass panels. EZCLEAR Instrument Cleaning provides a safe, effective way to remove fingerprints and dust from glass panels, instruments and more. Click here to see EZCLEAR featured in the February 2011 edition of AOPA Pilot. The kit contains three EZCLEAR Cleaning Packs and one Polishing Cloth. Description GPS Protection Kit for Garmin aeras GPS Protection Kit for AV8OR Part No. 11-09429 11-09431 Price $26.45 $26.45
This angled kneeboard accommodates virtually every handheld GPS or PDA. The circular base is slightly cone-shaped for a leg-conforming fit and is wiggle-free secured around either upper leg with a velcro tape. The GPS or PDA attaches with velcro on a slant surface, which is angled about 30 and permits a perpendicular view on the screen. P/N 11-01285 ..................$19.95
This product meets Garmin G1000 Pilot Guide specs for cleaning and is safe to use on glass panels. EZCLEAR Instrument Cleaning provides a safe, effective way to remove fingerprints and dust from glass panels, instruments and more. The kit contains three EZCLEAR Cleaning Packs and one Polishing Cloth; these items have been specifically paired together to ensure safe and effective screen cleaning. Per the instructions, the user wipes the surface with the Cleaning Pack and then dries the area with the Polishing Cloth. The Cleaning Packs are ammonia free, aviation-grade and will not remove or damage any anti-reflective coating. The Polishing Cloth is washable. This kit will last between 3-4 months depending upon frequency of use. P/N 09-02394 ........................ $14.85
580
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No.
Price
Part No.
Price
Part No.
Price
Garmin GPSMAP 696 Americas Garmin aera 560 Americas Garmin Power Data Cable Garmin Power Data Cable AirGizmo Panel Dock AirGizmo Panel Dock Garmin SL 40 COM with 11-07126 $7,601.00 Garmin SL 40 COM with harness harness 11-05049 $5,386.00 Garmin GTX 330 Mode S Garmin GTX Transponder w/ Harness 320A Transponder Ameri-King AK-350 w/ Harness Encoder Ameri-King AK-350 GARMIN PACKAGE L Encoder Garmin GMA 240 Audio Panel with basic GARMIN PACKAGE B GARMIN PACKAGE G* harness Garmin aera 500 Garmin aera 500 Americas Garmin aera 560 Americas Americas Garmin Power Data Cable Garmin Power Data Cable Garmin Power Data Cable 11-07127 $5,429.00 AirGizmo Panel Dock AirGizmo Panel Dock AirGizmo Panel Dock Garmin SL 40 COM with Garmin SL 40 COM with Garmin SL 40 COM with 11-05045 harness $4,518.00 harness harness 11-05050 $5,326.00 Garmin GTX 327 Garmin GTX 327 Garmin GTX 327 Transponder w/ Harness Transponder Transponder w/ Harness Ameri-King AK 350 w/ Harness Ameri-King AK-350 Encoder Ameri-King AK-350 Encoder GARMIN PACKAGE M Encoder Garmin GMA 240 GARMIN PACKAGE C Audio Panel with basic GARMIN PACKAGE H* harness Garmin aera 510 Garmin aera 510 Americas Garmin aera 560 Americas Americas Garmin Power Data Cable Garmin Power Data Cable Garmin Power Data Cable 11-07128 $5,826.00 AirGizmo Panel Dock AirGizmo Panel Dock AirGizmo Panel Dock Garmin SL 40 COM with 11-05051 $7,116.00 Garmin SL 40 COM with Garmin SL 40 COM with 11-05046 $4,894.00 harness harness harness Garmin GTX 327 Garmin GTX 330 Mode S Garmin GTX 320A Transponder w/ Harness Transponder w/ Harness Transponder w/ Harness Ameri-King AK 350 AK-350 Encoder Ameri-King AK-350 Encoder Encoder Garmin aera 500 Americas Garmin Power Data Cable AirGizmo Panel Dock Garmin SL 40 COM with 11-05044 $4,496.00 harness Garmin GTX 320A Transponder w/ Harness Ameri-King AK-350 Ecoder
GARMIN PACKAGE I GARMIN PACKAGE D GARMIN PACKAGE N*
Garmin GPSMAP 696 Americas Garmin aera 510 Garmin Power Data Cable Americas AirGizmo Panel Dock Garmin Power Data Cable Garmin SL 40 COM with 11-07124 $5,881.00 AirGizmo Panel Dock harness Garmin SL 40 COM with 11-05047 $4,975.00 Garmin GTX 320A harness Transponder w/ Harness Garmin GTX 327 Ameri-King AK-350 Transponder w/ Harness Encoder Ameri-King AK-350 Encoder
GARMIN PACKAGE J GARMIN PACKAGE E
Garmin GMA 240 Audio Panel with basic harness Garmin aera 560 Americas Garmin Power Data Cable 11-07129 $6,385.00 AirGizmo Panel Dock Garmin SL 40 COM with harness Garmin GTX 327 Transponder w/ Harness Ameri-King AK 350 Encoder
GARMIN PACKAGE O
Garmin GMA 240 Audio Panel with basic Garmin GPSMAP 696 Garmin aera 510 harness Americas Americas Garmin GPSMAP 696 Garmin Power Data Cable Garmin Power Data Cable Americas AirGizmo Panel Dock AirGizmo Panel Dock Garmin Power Data Cable Garmin SL 40 COM with 11-07125 $5,984.00 11-07130 $6,624.00 Garmin SL 40 COM with 11-05048 AirGizmo Panel Dock $6,683.00 harness harness Garmin SL 40 COM with Garmin GTX 327 Garmin GTX 330 Mode S harness Transponder w/ Harness Transponder w/ Harness Garmin GTX 327 Ameri-King AK-350 Ameri-King AK-350 Transponder w/ Harness Encoder Encoder Ameri-King AK 350 Encoder
* CAN SUBSTITUTE A GPSMAP 496 FOR A AERA 560 FOR THE SAME PRICE. MUST SPECIFY AT TIME OF ORDER.
581
Securely mounts Bendix/King AV8OR GPS. Installs easily in a standard 6.25" opening. Designed to allow quick and easy removal of your portable GPS. Includes right angle extension cable for weather antenna. Gives your instrument panel a professional, finished look. Width: 6.25" Height: 4.00" P/N 11-07782 ....................$109.95
Securely mounts the Garmin GPSMap 695/696. Designed to allow quick and easy removal of your portable GPS. Made from durable, high quality plastic similar in appearance to the GPS itself. Gives your instrument panel a professional, finished look. Garmin 695/696 Panel Dock .............................P/N 11-09439 ...$168.95 Horizontal Tilt.....................................................P/N 11-07310 .....$46.85
Designed to securely mount your AV8OR ACE in the panel, the AV8OR ACE Panel Dock is the perfect companion to this GPS from Bendix/King. Designed to match the styling of the rest of the avionics in your panel. It fits a standard 6.25 radio stack. The AV8OR ACE can be snapped into the Panel Dock with either the standard battery or the extended battery attached to the GPS. P/N 11-08589 ....................$139.95
Designed to securely hold your Garmin 196, 296, 396, or 496 portable GPS. It fits nicely in a standard 6.25 avionics stack. Allows you to quickly remove your portable GPS from your plane for upgrades, flight planning, or for use in your car or boat. The Panel Dock is shipped with a set of mounting hardware necessary for attaching it to an avionics stack. P/N 11-03509 ............... $88.50
Now you can mount the beautiful, detailed display of the AvMap EKP-IV directly in your instrument panel using the AirGizmos EKP-IV Panel Dock. The AirGizmos EKPIV Panel Dock is designed to hold the AvMap securely yet it allows you to easily remove your portable from your plane whenever the need arises. The AirGizmos EKP-IV Panel Dock offers easy installation, quick release, hassle-free management of cables, and elegance of design................ P/N 11-04371........... $109.95 This GPS has a nice large screen to go with its small size. Our Panel Dock is designed to hold the GeoPilot securely in your panel while allowing it to be easily removed for portable use. Made from durable, high quality plastic similar in appearance to the GPS itself. Gives your instrument panel a professional, finished look ..............P/N 11-05615 .......... $96.95
The Garmin 295 is held safely and securely, but can be easily removed in a matter of seconds. The external power and antenna connections are made at the back of the unit, and the cables are secured from falling into the panel with special keyholes machined into the dock. ............................... P/N 11-04315............. $89.95
The Vertical Tilt Adapter angles the viewing angle of the GPS so it is more readable when the GPS is mounted at the bottom of a tall instrument panel. This adapter fits the same opening as the Panel Dock itself, so adding the vertical tilt should be very easy for existing installations. REQUIRES P/N 11-03509. P/N 11-05029 ...................... $24.95
Fits in a standard 6.25 radio stack. Power and antenna cables are organized and managed. The included WxWorx weather receiver bracket provides additional organization in the cockpit by providing a secure mount for the WxWorx receiver box.P/N 11-06855 ....... $109.95
AirGizmos Horizontal Tilt Bracket angles the GPS at a fixed angle of 15 degrees, providing a much more convenient viewing angle. This adapter fits in the same panel cutout as the Panel Dock, so if you already have a Panel Dock you can attach this adapter without having to modify your installation. REQUIRES P/N 11-03509. P/N 11-04671 .................... $21.95
The cables supplied by Lowrance fit through keyhole slots on the back of the unit. The release latch at the top of the Panel Dock permits quick removal of the device for use in another vehicle or simply for security purposes..................... P/N 11-04372............$109.95
Now you can move the XM antenna from plane to plane, or from vehicle to vehicle. It is designed to mobilize your costly 496 XM antenna. It helps to maintain the clean look of a permanenet installation by organizing the antenna cable. Using a simple twist & lock mechanism (no tools required) the base will lock your antenna into the preinstalled cradle, and your 396 XM antenna is ready to go!P/N 11-04694..................... $74.95
Lowrance makes a low cost handheld GPS that is just the perfect size for many panels. Our Panel Dock will allow the AirMap 600c to be nicely mounted in your panel while still allowing it to be easily removed and used as a handheld. Made from durable, high quality plastic similar in appearance to the GPS itself. Gives your instrument panel a professional, finished look. P/N 11-05616..............$62.95 Would you like to be able to permanently mount the GPS or XM Weather antenna from your favourite GPS? If so, the Aero Cover is for you. It fits all of the major brands of GPS and XM weather antennas. It will protect your antenna from the elements. It is streamlined and attractive. Best of all, it gets your antenna out of your way. P/N 11-04777.............$64.95
The AirGizmos Antenna Dock is designed to mobilize your costly 496 XM antenna. It helps to maintain the clean look of a permanenet installation by organizing the antenna cable. Package includes: base, cradle, beenbag assembly, and two cables. P/N 11-07007 ...........$117.50
XM Antenna Cable Straight, 2 meter extension for Garmin XM Weather Antenna P/N 11-04780............. $13.95
Dont have room to install the Garmin XM Antenna inside your plane? The Aero Dock gives you the option of mounting it on the outside. The AirGizmos Antenna Dock is designed to mobilize your costly 396 XM antenna. It helps to maintain the clean look of a permanent installation by organizing the antenna cable. Using the AirGizmos Aero Dock you can freely move ONE XM antenna from location to location, avoiding high costs of additional equipment and service subscription. Kit includes: 1 cradle, 1 base, 1 cable, mounting hardware. P/N 11-04778............. $74.75
582
The AV8OR ACE offers all the features of the smaller AV8OR, plus displays all FAA IFR charts (subscription required), including own ship position on Hi/Lo enroute charts, approach plates, and airport diagrams. Other features include: compact size - fits on most aircraft yokes placing a big screen right in front of the pilot, simplified airway navigation - being a dedicated GPS portable with IFR airway navigation and smart airway automatic routing, 7 inch diagonal touch screen interface simplifies planning, selecting waypoints and entering identifiers, portable glass panel which provides modern GPS-derived altitude information with HSI and courselines on the top half of the screen, XM weather, XM Radio and traffic capability, flight guide, fuel pricing and local services directory, graphical weight and balance for fueling and loading, GoDrive car navigation gets you to your final destination and includes over 2 million points of interest in the U.S. and Canada, and lastly it plays music, movies, photos, and even serves as a speakerphone for any Bluetooth enabled cell phone. Description Part No. AV8OR Ace Go Fly - Americas 11-07925 AV8OR Ace Go Fly - Americas with WX Weather 11-08466 AV8OR Ace Go Fly Atlantic 11-07928 Go Fly/Go Drive Aviation & Car Database Description Part No. AV8OR Ace Go Fly/Go Drive - Americas 11-07923 AV8OR Ace Go Fly/Go Drive - Atlantic 11-07926 Price $1,035.00 $1,608.00 $999.00 Price $1,199.00 $1,199.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
11-07923 cover North/South America for aviation database and USA/ Canada for road maps. 11-07926 covers Europe/Africa/Middle East for aviation database and Europe for road maps (does not include Russia). Accessories Carring Bag Display Mounting Bracket Windshield/Yoke Mount Auto Dashboard Mount Single RS 232 SRL Cable 7.4 WHR Battery 12-28V adapter 90 14.8 WHR Battery 120/220V Adapter 90 PC to USB. Cable Replacement Stylus Part No. 11-08105 11-08106 11-08107 11-08109 11-08110 11-08113 11-08114 11-08115 11-08116 11-08117 11-08108 Price $26.75 $14.75 $59.65 $50.75 $13.50 $42.75 $34.75 $82.75 $42.75 $11.95 $7.25
Large 7 Touch Screen GPS offers unprecedented spacial awareness and a simple to use intuitive interface. A sleek buttonless design. Please note that this unit only offers USA chart information at this time. Includes: iFly 700 GPS, Suction Mount, AC Power Adapter, 12-28V DC (Cigarette Lighter) Power Adapter, 4 GB SDHC Card, Remote Carrying Case 2 months Enhanced (IFR) Subscription. Features: 7 Color Samsung Touch Screen with 800 x 480 resolution. 20-Channel SiRF III GPS Receiver. FAA Sectionals, Terminal Area Charts, IFR Low Enroutes, App/Dep Plates and more; please note that this unit only offers USA chart information at this time. Public and Private Airport Database. Multiple Display Modes: Sectional, Night, Track-Up and more. Touch and Drag panning and scrolling. Customizable Instrument overlays. Airport Taxi Diagrams. Simple Update process using a USB flash drive. MP3 Player, Movie Player, Photo Viewer and more. Optional External Antenna. Optional Power Supply. (Provides 4+ hours at full brightness)
Description Adventure Pilot iFly 700 Adventure Pilot iFly Antenna Adventure Pilot iFly 700 External Battery Part No. 11-09329 11-09495 11-09494 Price $549.00 $23.75 $86.75
Sunny days are no issue with the iFly 720. Perfect for those bright open cockpits. Automatic Wi-Fi Updating. Connect to a Wi-Fi hotspot to enjoy fast and easy automatic data updates. iFly Streets is Included. Now you can go straight from the runway to the highway with iFly Streets. The iFly 720 outperforms the competition with a faster dual-core processor and memory. An advanced power circuitry ensures clean power for the ultimate safety and stability. Whats in the Box: iFly 720 Sunlight Readable Moving Map GPS, 12V-28V DC Adapter, 110V AC Power Adapter, Multi-point articulating suction mount, Remote control, Soft Case, and 2 months of VFR/ IFR Updates. Note: When data on your iFly expires, you will use a Wi-Fi Internet connection or a USB Flash Drive to perform an update. Dimensions: 7.25 x 4.5 x 0.75. Screen Resolution: 800 x 480. Weight: 12 ounces. LCD Size: 7.0 inch. Power Requirement: DC 12V~28V. GPS Type: SiRF Star III. Operating Temperature: 14F to 140F. Storage Temperature: -4F to 176F. P/N 11-10480 .................$724.00
er kit for the Honeywell AV8OR & AV8OR Ace. The connection for this is a bluetooth receiver (no cable required to interface the two units). Includes: Basic Receiver, Bluetooth Interface Module, Portable Antenna, AC & DC Adapter, Mounting Hardware P/N 11-06712 .......$573.00 WX WEATHER RS 232 KIT - This is the weather kit for the Honeywell AV8OR and AV8OR Ace. The connection for this is a USB cable (Cable required to interface the two units). Includes: Basic receiver, RS232 Interface Module Specific to the Honeywell AV8OR and AV8OR Ace Handheld, Portable Antenna P/N 11-06713 .......$515.95
ACCESSORIES
WX WEATHER PORTABLE ANTENNA - Small and portable, the XM Radio antenna allows you to receive a satellite signal from XM Radio and XM WX Satellite Weather (subscriptions required). A 23-ft. cable ensures flexible installation to the WxWorx receiver via an SMA connection. The antenna features a magnetic mount that firmly affixes it to metal surfaces, with rubber feet to prevent scratching. NOTE: This antenna is not compatible with the original WxWorx receiver (Model WXP03). P/N 11-06716 .........$27.95 AUDIO CABLE - Code:AUDCAB ..................P/N 11-06729 .........$15.75 WX WEATHER DC POWER SUPPLY - 50 ft. extension cable for the XM Digital Antenna Code:DCDC2 .......................P/N 11-06730 .........$18.95 WX WEATHER DC POWER WITH PLUG - Code:DCDCLUGS P/N 11-06731 .........$19.50 WX WEATHER AC POWER SUPPLY - Code:ACDC2 P/N 11-06732 .........$17.75
583
Pocket Plates Software with 6 months of Updates. Entire 12,000+ page library of current NACO (FAA) approach procedures for the lower 48 states for display on a Pocket PC (PDA) computer, or Windows laptop or tablet PC. Included with the plates are all ephemera: performance, Arrivals and Departures. Exact reproductions of current procedures as published by the Charting Office. Updated online by subscription every 28 days. Satisfies requirements for Part 91 usage. Real-time GPS Position - Pocket Plates contain all underlying fixes, intersections, airports and navaids in map coordinate format. Plates are calibrated, a simple process that takes about ten seconds, consisting of identifying two objects on the plate such as a fix and the airport. Product components - Consists of a Plate Manager that installs on your laptop or desktop PC, and a Plate Viewer for displaying the procedures on a Pocket PC. The Plate Manager selects which plates you store on your Pocket PC or Tablet; performs automatic Auto-Pilot Updates of the plate library, and prints our hard copies of plates as backup for specific routes. Select approaches either by typing in an airport identifier or by tapping on geographic regions of the country. The procedure is intuitive and very fast and there are no fragile paper plates to remove from a binder. Storage Options - The entire 12,000page U.S. plate library and the Plate Manager are stored on a Windows PC in under 1 Gigabyte of disk space. Plates are stored for viewing on Pocket PC or Raven computers using a memory card. A 1-gigabyte card will store the entire library with about 200 MB left over. Compatibility - Pocket Plates is supported for Pocket PCs with ARM processors such as iPAQs and Toshibas, and Windows 2000/XP computers. It is not currently supported on Casio Pocket PCs. P/N 11-02239...$214.95 The powerful G-Force vacuum base can withstand 23g of shear force, making a sturdy, lasting bond wherever you have a smooth, non-porous surface. That includes glass, plastic, even gelcoat. Creates a stable, reachable platform for your portable GPS that makes programming a breeze Take it from airplane to auto. It even works in the boat. All G-Force Mounts include appropriate mounting hardware and an easy-to-follow User Guide. Mount for Early Garmins - The G-Force Mount docks directly to the OEM cradle supplied by Garmin International with its GPS/MAP models 195 through 496 and all Lowrance AIRMAP models. Other Garmin models and units from other manufacturers may require an interface cradle at additional cost. Cradles are not included with purchase. P/N 11-08097 .................$42.75 Mount for Garmin 695/696 - This G-Force GF2 Mount is all you need to turn your portable, large-format GPS into a heads-up display that will confirm your skill to think past the yoke. In the time it takes to unravel your headset, your portable, large-format GPS will look like a fixed addition to your panel instrument array. P/N 11-08099 .................$73.25 GF1.2 Aera Mount - The G-Force GPS Mount Manages your cockpit Resources, Restores your priorities, Returns valuable seconds to your command P/N 11-08773 .................$42.75 GF3 Antenna Farm - Collects Garmins multiple antennas on the GForce GF3 Mount, and locates them under the window canopy for superb clear satellite contact. A great way to manage that tangle of antenna wires. P/N 11-08101 .................$41.95 GF7 Camera Mount - Now, High-Speed Photography is a One-handed No-Brainer. Attach your lightweight camera or video to this G-Force GF1 Mount, fitted with an industry standard 1/4-20 camera stud. P/N 11-08103 .................$42.50 GF27 Camera Mount -Twice the holding power means double security. Dock your heavier camera to the G-Force GF2 Mount, fitted with an industry standard 1/4-20 camera stud. P/N 11-08104 .................$79.50
G-FORCE MOUNTS
The SEPTA is a fully functional touch screen GPS with the real estate to show full size approach plates, with the aircraft position clearly shown on the plate. Complete sectional and enroute charts, along with a high resolution terrain elevation database insures that the flight environment is always clearly shown on the brilliant seven-inch, fully sunlight-readable display. The SEPTA is a complete standalone GPS, no programs to install, no operating system to learn, and no waiting for it to boot up. Nothing is brighter than the SEPTA. The display is the brightest in the industry, there isnt a GPS available with a brighter screen. Ordinary Tablet computers are not optimized for use in the bright light of an aircraft cockpit and are typically only a fraction as bright. Other portable GPS units are typically 30 to 50 percent as bright as the SEPTA. The SEPTA is a full featured GPS system, packed with the features that people love about Anywhere Map, like high resolution terrain, Geo-Referenced Charts, Cones of Safety, Emergency landing mode, Extensive VNAV, online updating, rich surface features, 100LL.com fuel prices, approach plates, sectional charts, low/high enroute charts and much more. Like all Anywhere Map products, it includes a suite of virtual instruments that can overlay the map, including an HSI, Turn rate, Rate of Climb, heading and speed, and virtual glideslope. The SEPTA is housed in a rubberized case with convenient grips, an elegant and rugged docking connector and a removable / replaceable battery. Screen brightness is controlled by two pushbuttons, up and down. All other controls are via the big bright and beautiful touch screen. ...................P/N 11-09907 ............$1,495.00
Secure cameras to any smooth surface including: motorcycles, cars, airplanes, and more. Fat Gecko's suction cups are so strong they can safely secure hold a camera weighing up to six pounds. Allows for 360 tilt, 360 turn, and 360 rotation for all the best filming angles in any activity The 1/4 x 20 tripod mounting screws means you can use virtually any digital still or video camera on the market. Equipped with a removable extension tube so you can film around tire wells or over windshields.
Description Fat Gecko Camera Mount Fat Gecko Quick Release GPSMAP 696 - A quick and easy attachment of the Garmin 695 & 696 GPS units to be used in conjunction with the Fat Gecko. Fat Gecko Mini Mount - Single suction cup, with a 3 extension bar. Tested to carry 4 lbs. Fat Gecko Mini Tree Antenna - Gives users a quick and easy way to mount GPS antennas and others out of the way. To be used in conjunction with the Fat Gecko Mini Mount Part No. Price 11-07877 $79.99 11-07918 $18.95 11-07917 $38.95 11-07919 $23.95
584
GEO PILOT II
High Performance at an Affordable Price - The Geopilot II PLUS, the new portable aeronautical navigator developed by AvMap, is highly performing but truly affordable. GeoPilot II PLUS is faster than ever thanks to the new 300 MHz processor, more compact and practical with the built-in battery and GPS receiver, and an extra serial port available for connection with PC and autopilot devices. Large Display, Safe Navigation - AvMap GeoPilot II PLUS displays all the information you need on a wide 5 color LCD. The display is sunlight-readable and equipped with a sensor for automatic brightness control and an audio video input.The information are clearly visible and the map page is fully customizable. Weather Conditions - With an optional antenna you can receive constantly updated XM/WX weather conditions: NEXRAD (next generation radar), and Lightning information are displayed on the map. Enhanced Situational Awareness With the TAWS GeoPilot II PLUS displays your position in relation to surrounding terrain. With the new Crossed Airspace Predictor function, you can get a preview of the airspaces that you will cross along your flight, while the Crossed Airspace Advisor provides warnings during the flight on airspaces being crossed. Most Accurate Information - The cartography preloaded on the SD memory card includes the Jeppesen navigation database with terrain and vertical obstructions. The Map also includes and Victor Airways, marine objects, ULM Aerodromes and private airports.This enhanced database provides more navigation and emergency nearest options. Multifunctional: Navigate by Sky and Land! - AvMap GeoPilot II PLUS is engineered for aeronautical as well as terrestrial use as it can fit perfectly in your aircraft and in you car. With the 2GB SD Card preloaded with Tele Atlas Maps of Europe or North America GeoPilot II PLUS converts into an advanced car navigator with turn-by-turn vocal instructions! SD included at no extra costs! Hardware: Dimensions (mm): 140x100x35.4 Weight: 390g Display: LCD TFT 5 (12,7 cm) with audio - video input Display brightness: 400 nits Automatic brightness control: Yes + Night Palette for night flying Display Colors: 64 k Display resolution: 320x240 pixels GPS Receiver: Built-in Sirf Star III 20 channels Processor: Arm9 300Mhz RAM: 32 MB Memory Support: Secure Digital (SD) 256 / 512 MB Battery: Built-in Li-Ion rechargeable battery Power supply: Charger 10/35 V DC Built-in Speaker: Yes External GPS antenna serial Port Operating System: AvMap Software update: Free 2D view: Land Elevation (color coded topographic map showing the altitude of the terrain) Turn-by-turn vocal instructions: Yes, with built-in speakers (only for terrestrial navigation). Full flight planning capability: Up to 15 flight plans of up to 100 legs each Editable aircraft checklist, Trip computer, Full nav data Page, Full simulator functions, TAWS - Terrain Awareness and Warning System: Yes + Crossed Airspace Predictor and advisor, Integration with other on board navigation systems, Full or split HSI / RMI screen with data fields Content of the box : SD memory card, Flexible holder with suction cup, Quick start guide P/N 11-05814 .......$599.00 ACCESSORIES AvMap WX/XM Package ...............................P/N 11-07066 .......$599.00 Airgizmos Panel Dock for Geopilot II+...........P/N 11-06855 .......$109.95
GEOPILOT II PLUS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AvMap presents EKP V the next step in the evolution of aeronautical GPS, redefining the role of the GPS inside the cockpit. Fully Portable A brilliant 7 display, with built-in battery and GPS, only 0.8 thick. EKP V is slim and light, yet very powerful: with built in u-blox 5 GPS receiver, built-in battery and speakers.
585
The XGPS150 is very simple to use. There is a quick set up process that includes pairing your device with the Receiver. Once this is done, the Receiver will automatically connect to the device it was last paired with, and you will be able to use it with hundreds of apps that require location information. The XGPS150 also comes with a useful GPS Status Tool App (available free on the iTunes store, not required for the device to work). The App is a simple utility application for use with the XGPS150. It shows detailed information from the XGPS150 including: Your location (or whether the device is still determining where you are) How many satellites the device sees and the signal strength of each satellite. The battery level of the XGPS150, and whether or not it is charging. Confirmation the XGPS150 is successfully connected to your iPad/iPod touch/iPhone P/N 11-09941 ......................$99.99
Premium GPS with top-of-the-line mapping, sensor navigation and multimedia capability. Fully loaded with over 3GB of detailed topographic outdoor maps and content in a high performance GPS computer with electronic compass and altimeter. Unparalleled easeof-use with combination of simplified touch screen interface and "hot key" physical buttons to quickly access all primary features. Unparalleled ease-of-use with combination of simplified touch screen interface and hot key physical buttons to quickly access all primary features. Multi-recreational with dedicated outdoor features and a large range of mapping options preloaded on plug and play Micro SD cards or web download.
Price $389.00 $87.95 $87.95 $87.95 $87.95 $87.95 $87.95 $87.95 $87.95
This small GPS receiver provides position information to aviation apps such as Wing X and ForeFlight to provide a moving map display on Apple iPad, iPhone, and iPod Touch. It features a simple set up procedure, 32 channel GPS receiver, wireless Bluetooth and a rechargeable battery for over 10 hours of GPS use. This small (3.1 x 1.25 x 1/2) receiver uses Bluetooth to wirelessly connect GPS to your Apple device. Compatible with iPad 1 and 2, iPhone 3G, 3Gs, 4GS and iPod Touch 2G and 3G. Features: STT SmartTouchTechnologie - to turn on or turn off, Highsensitive 32-channel GPS chip, NMEA und iPhone protocol, iPhone/iPod operating system from OS 3.0.1, iPad operating system, Over 10 hours of operation, Only 11,3 mm thin and 47 g in weight. Compatibility: iPod touch 4G, 3G, 2G, iPhone 4, 3GS, 3G, iPad 2, iPad. In The Box: GNS 5870 MFI Receiver, Charger cable, Cigarette-lighter socket adapter, Manual. .................................................... P/N 13-10270...............$99.95
Description Part No. Lowrance Endura Sierra 11-09720 US/CANADA: Road Turn-by-Turn Navigation micro SD. 11-09722 Complete NAVTEQ road detail for USA and Canada. GREAT LAKES: Advanced Outdoor microSD. 20ft topo contours with advanced hillshade. Covers MI, WI, OH, 11-09723 IN, WV, KY, and IL. MIDWEST: Advanced Outdoor microSD. 20ft topo contours 11-09724 with hillshade. Covers MN, IA, MO, ND, SD, NE, and KS. NORTHEAST: Advanced Outdoor microSD. 20ft topo contours with advanced hillshade. Covers ME, NH, MA, 11-09725 RI, CT, NJ, VT, NY, PA, DE, MD, and VA. ROCKIES: Advanced Outdoor microSD. 20ft topo contours with advanced hillshade. Covers MT, ID, WY, CO, 11-09726 UT, NM, and AZ. SOUTH: Advanced Outdoor microSD. 20ft topo contours 11-09727 with advanced hillshade. Covers OK, AR, LA, and TX SOUTHEAST: Advanced Outdoor microSD. 20ft topo contours with advanced hillshade. Covers TN, NC, SC, 11-09728 GA, FL, AL, and MS. WEST COAST: Advanced Outdoor microSD. 20ft topo contours with advanced hillshade. Covers CA, NV, OR, 11-09729 and WA. Accessories Handheld Accessory: Cradle and Handle Bar Mount, Quickly remove or move between bikes, Power cable can 11-09731 be attached while mounted Endura GPS Carrying Case: nylon; includes velcro belt strap, 11-09732 caribiner clip, and internal pocket for microSD cards.
$28.95 $19.50
Bad Elf provides GPS information to popular aviation apps using a high quality 66 channel WAAS GPS. It works with all iOS devices such as iPad, iPhone and iPod Touch. Bad Elf plugs into the bottom of the iPad or iPhone and includes a USB port which can be used to sync and charge the iPad iPhone not or iPhone. Furnished with a detachable lanyard. included. Compatible with iPad 1 and 2, iPhone 3G, 3GS, 4GS, and iPod Touch 1G-4G. Specifications: 66-channel MTK GPS chipset, Fast GPS lock times Up to 10Hz update rate, SBAS/WAAS/ EGNOS/MSAS Assisted GPS (when network available), Micro-USB port and 6ft cable provided for charging / syncing during use, App available to update satellite data and firmware, Max altitude: 60K feet, Max speed: 1000 mph................................................. P/N 13-10273...............$99.95
Multi functional electronic instrument that incorporates a sophisticated audio interface system with a high level input to accept external MP3, GPS and Cell phone products, a highly accurate digital Altitude Alert System, a digital Tank Timer for fuel Management, and a power management system designed to get the most out of its on board battery. By plugging the unit directly into the existing headphone jacks ( phones and mic) the unit performs a seamless interface connection that allows the pilots headphones to continue to use the ships audio while at the same time provides the Aux I/O to be used with an MP3, Iphone, or Blackberry. Cell Phone audio is of course conditioned and routed through the system providing noise reduction and safety. Has a self contained VOX (Voice Operated Xchange). This feature mutes any audio coming from the Aux input any time there is audio activity on the intercom or radio. Internal Altitude Alert System is built around the highly accurate Bosch Digital I2C Pressure Sensor. The accuracy of this device allows the FC-The Tank Timer System that is supplied with the FC-1 is designed to keep the pilot aware of how much fuel is being burned. The FC-1 system uses a common 9 volt alkaline battery. Estimated life of the battery is approximately 25 active hours under typical operation. This can vary depending on usage. If for some reason the system is not shut down after a flight the unit will automatically go into sleep mode 2 minutes after either the left or right tank alarm is activated. Description Matchbox Flight Companion FC-1 Matchbox Altitude Alert AA-1 Matchbox Tank Timer TT-1 Matchbox Audio Interface AI-1 DVM-828 Voltage Monitor Part No. Price
11-09630 $259.00 11-09634 $126.95 11-09633 $67.95 11-09631 $139.95 11-09998 $39.75
586
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Garmin is changing the course of aviation yet again! Introducing the GTN 650 next generation touchscreen avionics. This panel-mount unit is certified and approved for installation in hundreds of makes and models of general aviation aircraft. The GTN 650 has GPS/NAV/COM capabilities and new features like intuitive touchscreen operation, graphical flight planning, victor airway and high-altitude jet route navigation, remote transponder, SafeTaxi and more. Thanks to built-in terrain, mapping and obstacle databases, the GTN provides a greatly enhanced, high resolution presentation of the surrounding area. A built-in terrain elevation database shows color-coded alerts when potential terrain conflicts are ahead. Full Class B TAWS alerting is also available as an option. The SBAS/WAAS equipped GTN 650 series lets pilots fly GPS-guided LPV glidepath approaches down to ILS-comparable minimums. In addition, precise course deviation and roll steering outputs can be coupled to select autopilots so that IFR flight procedures may be flown automatically. This includes all ARINC 424 leg types, excluding RF legs (for example, when coupled with a G500/G600 Flight Display, the aircraft can fly fully coupled missed approaches, including heading legs). Included: Garmin GTN 650 System (Black) Garmin GTN Americas Database or Garmin International Database Garmin GA 35 WAAS Antenna Garmin GTN Harness For certified aircraft please see our partner USA avionics shops. Pricing below is for an experimental aircraft only with harness. Garmin GTN 650 Americas w/ harness ..........P/N 11-09702 .$10,222.00 Garmin GTN 650 International w/ harness .....P/N 11-09706 .$10,694.00
Introducing the next generation of aircraft navigation. The GTN 625 is a 2.64-in.-tall standalone GPS navigator that puts a wealth of features like high-resolution terrain mapping, graphical flight planning, traffic display and more right at your fingertips. With the GTN 625s revolutionary new touchscreen interface, youre rarely more than two taps away from all of the systems primary functions. Traditional concentric knobs are also available for those who are used to that style of data input. The GTN family makes it easier than ever to get where youre going. Graphical flight planning capabilities allow you to edit your entire route using the map screen and easily enter new waypoints or modify existing ones. The systems robust 15-channel GPS receiver generates five position updates per second. Packed full of multifunction display capabilities, the GTN 625 brings enhanced situational awareness to your cockpit. With high-resolution terrain mapping including topography features, cities, airports, terminal areas, SUAs and more and optional Class B TAWS alerting, youll find your way around the airspace safely and with ease. The system even allows you to load and follow Victor and jet airways. On the ground, built-in Garmin SafeTaxi U.S. airport diagrams give you geo-referenced runways, taxiways, FBOs and hangars. Couple the system with a GDL 69 series datalink receiver and XM subscriptions, you can overlay NEXRAD radar right onto your moving map display and receive satellite music. Or add a Garmin traffic system and pinpoint other aircraft in your vicinity. The GTN 625 can control the GTX 32/33 remote transponder, which could also save you valuable panel space. The GTN 625 features a front-loading SD card reader, so you can easily update your databases. In The Box: GTN 625, Cleaning cloth, SD card with databases, Installation kit, Simulation software DVD, Familiarization video DVD, Pilots guide, Cockpit reference guide, Complimentary database update certificate. ................................................................P/N 11-09973 ...$7,923.00
587
TWith fingertip annunciation and flight information in the pilots primary view, Annunciation Control Units (ACU) offer MD41-1510 important features in an efficient design. As an interface with popular NAV and GPS systems, the ACU provides vital safety information including MD41-1468A waypoint, approach status and integrity alerting. Vertical Approved to strict TSO stanView dards, Mid-Continent ACUs are engineered as a compact, MD41-1408A affordable solution to the challenge of installing several switches. Most versions are configured 14V or 28V with vertical or horizontal mounting and feature long-life lamps with automatic photocell dimming.
GARMIN WAAS ACU - GNC 420W, GNS 430W/530W Model No. Configuration Part No. Price 28V Horz. for Garmin MD41-1510 10-04768 $1,124.00 GTN650/750 14V Horz. for Garmin MD41-1512 10-04769 $1,124.00 GTN650/750 MD41-1464A Horizontal, 14V (head only) 10-02665 $1,067.00 MD41-1468A Horizontal, 28V (head only) 10-02663 $1,067.00 MD41-1474A Vertical, 14V (head only) 10-02666 $1,067.00 MD41-1484W Horizontal, 14V WAAS 10-02657 $649.00 MD41-1488W Horizontal, 28V WAAS 10-02659 $649.00 MD41-1494W Vertical, 14V WAAS 10-02660 $649.00 MD41-1498W Vertical, 28V WAAS 10-02661 $649.00 GPS 400/500, GNC 420/520, GNS 430/530 MD41-1404A Horizontal, 14V (head only) 10-02669 MD41-1404A Horizontal, 14V (with remote relay) 10-02670 MD41-1408A Horizontal, 28V (with remote relay) 10-02667 MD41-1418A Vertical, 28V (head only) 10-02672 MD41-1418A Vertical, 28V (with remote relay) 10-02671
588
CM
A Level 2 Mode-S transponder with exciting datalink traffic capabilities. Sharing the same keypad & digital display with the popular GTX 327, the GTX 330 adds to the features with an outside air temperature display (temp. input required), altitude monitor with voice audio alert, and density altitude computations (temperature input required). But the real excitement lies in the GTX 330s datalink traffic capabilities through the FAAs Traffic Information Services. GTX 330 promises to deliver effective traffic information to the GA cockpit in busy terminal environments at a fraction of the cost of current traffic systems. The TIS system is available through 124 Mode-S Traffic Control radar sites throughout the U.S. Aircraft within a 60nm (expected to increase to 90+nm) radius of a Mode-S radar site will receive traffic advisories and warnings from ATC via Mode-S datalink, and this info will be displayed on Garmin 400/500 series products. This system will display 8 nearest targets within a 7nm radius and 3,500 feet of the aircraft. Pilots will receive both visual traffic information (via 400/500 series products) and radio alerts of traffic in the area. The GTX 330 meets all requirements of the Mode-S mandate in Europe, which requires Mode-S for IFR traffic by 2003 and all VFR traffic by 2005. GTX 330 will be offered in diversity & non-diversity models to meet the requirements of a variety of aircraft and operations. The GTX 330D (diversity model) is the first panel-mount diversity-model transponder available. 2 year warranty.
The GTX 330 can only be sold over the counter to experimental aircraft owners with a pre-wired harness. Please call 1-800-826-3160 for partner shop location for certified installs. (price of installation not included)
WP ME HA AP LG EP CS
All-in-one GPS/Nav/Comm solution. It features a WAAS-certified GPS, 2280-channel capacity comm and 200-channel ILS/VOR with localizer and glideslope. High-speed 5 Hz processing makes navigation calculations and map redraw rates five times faster than earlier GNS series navigators. Built-in WAAS navigation capabilities. It is approved to fly LPV glideslope approaches without reference to ground-based navaids of any kind. Featuring an advanced 15-channel receiver capable of five position updates per second, GNS 430W meets the FAAs stringent TSO C146a standards for WAAS sole means navigation providing vertical and lateral approach guidance into thousands of U.S. airports previously inaccessible in IFR conditions. 4-inch high-contrast display with brilliant colors makes it easy to read and interpret pilot-critical information. Conveniently scan information from wide viewing angles, even in direct sunlight. Integrates built-in terrain and navigation databases, providing a clear, concise picture of where you are and where youre heading. The 430Ws huge Jeppesen database, updated with front-loading data cards, contains location reference for all airports, VORs, NDBs, Intersections, Flight Service Stations, published approaches, SIDs/STARs, Special Use Airspace and geopolitical boundaries. GNS 430W with harness (Exper. A/C) ....P/N 11-06750 ..........$8,522.00 GNS 430W/530W Wiring Harness ..........P/N 11-06749 .............$695.00 Navishield 430 Screen Protector.............P/N 05-04224 ...............$12.95 Flight Plan Migrator Kit ............................P/N 11-07592 .............$418.50 Flight Plan Data Card ..............................P/N 11-07593 .............$324.00
The Garmin GNS 530W/430W can only be sold over the counter to expermental aircraft (must verify) with harness. For certified aircraft, it must be installed by a Garmin Dealer. Please call 1-800-826-3160 for partner shop location for certified installs. (price of installation not included)
Description
GTX-330 Mode S Transponder w/ Harness
Computer based training program for the pilot who wants an audio-visual, hands-on way to quickly master the Garmin 530/430 GPS. Windows and Mac compatible. Jeppesen GNS 530/430 Advanced P/N 13-05645 ........$109.95 Jeppesen GNS 530/430 Interactive P/N 13-05644 ........$159.95 Jeppesen GNS 530/430 Training P/N 13-05646 ........$139.95 With the intro of the GTX 327, Garmin revolutionizes a part of the panel that has been long overlooked. This full-featured, TSO certified transponder brings a unique level of functionality and utility to your airplane. Its solid state transmitter provides 200 watts nominal power output and eliminates the need for a cavity tube which will eventually fail and require expensive replacement. And since the GTX 327 design is 100% solid state there is no warm up time, lower power consumption and lower heat emission. All of which translates to a longer service life. Some of the GTX 327 biggest features are the easiest to see. Among them, the easy-riding DSTN Liquid Crystal Display which reverses yellow numbers out of black for optimal viewing. An innovative keypad makes entering a squawk code a snap. And a dedicated VFR button allows for quick and easy 1200/VFR squawking. The GTX 327 also offers two important timing functions. The first screen shows the current time and count up timer. The second indicates flight time and a count down timer. Together they represent a whole new standard in transponder utility. GTX 327 with Harness ....................... P/N 11-00329 .............. $1,839.00 The GTX 327 can be sold over the counter to certified & experimental aircraft owners with a pre-wired harness.
NOTE: The GTX 330 & GTX 327 DO NOT include an antenna. Experminental Aircraft can order TED Transponder antenna P/N 11-17995 for $17.95
IN EL AV TO PS BV
The GI 102A and GI 106A course deviation indicators (CDI) from Garmin feature rectilinear meter movements, resolver output for GPS interface, and internal GPS mode annunciation & VLOC. Works with the Garmin 430W, 530W, & SL 30. The 102A is VOR/ Call For LOC CDI and the 106A is VOR/LOC/GS Special Price! CDI. Size: 3.25w x 3.25h x 4.625d. The GI 102 is designed for VFR use. The GI 106A is designed for IFR installations. GI 102A CDI P/N 11-18980 .....$1,938.00 GI 106A CDI P/N 11-05768 .....$2,070.00
For a quote on complete custom panels for experimental aircraft please emal: avionics@aircraftspruce.com
589
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Non-TSOd so its priced really low. Yet, it includes an intercom and will support dual COMM, dual NAV, dual AUX receivers, and dual music audio inputs plus up to three unswitched inputs for telephone ringers, altitude alerts, or other warning tones. Pilots can connect up to two dedicated music sources to the rear connector (e.g. XM music and CD player) and over-ride one of those sources at any time by plugging-in a device (e.g. MP3 player) into the 2.5 mm front jack. The music sources volume can be increased or decreased with the GMA 240 by pulling out the copilot volume knob. The 2.5 mm front jack also makes it easy for pilots to make and receive cell phone calls. It has a full-duplex telephone interface with intercom isolation capability. Specifications: * Weight: 15.5 oz (440 g) * Dimensions: 1.3 x 6.29 x 7.12 * Power: Input voltage range: 11-33 Vdc, 4.3 W normal * Temperature range: -20C to +55C * Altitude: 55,000 MSL unpressurized * Transceiver inputs: 3 (including TEL) * Receiver inputs: 4 * Alert inputs: 3 * Input impedance: 500 Ohms * Input isolation: 60 dB min * Bandwidth: 100 Hz to 6.5 kHz * Music inputs (stereo): 2 * Music gain: -20 dB @ min. volume, +26 dB @ max. volume ..........P/N 11-06619 ...............$845.00 Powerful 760 channel comm radio with a 200 channel VOR, glidescope and localizer receiver. Built-in course deviation indicator may be displayed and the SL 30 interfaces with most common mechanical CDIs and HSIs. The SL 30 can be shipped for installation in any aircraft and does not require dealer installation. SL 30.........................................P/N 11-03581 ........... $3,950.00 SL 30 With Harness ..................P/N 11-05109 ........... $3,895.00 The Garmin GMA 340 audio panel is compact and lightweight, making it an excellent choice for panels with limited space. Audio panel features include 3 transceiver inputs, 5 receiver inputs, and 2 unswitched inputs. The intercom provides 6 positions, 3 volume controls, 2 VOX level controls, 6 VOX circuits, and 2 stereo music imputs. This unit features 3 stereo headphone outputs and 2 speaker outputs, and the marker beacon receiver features input impedance of 50 ohms. Size: 6.8d x 6.29w x 1.3h. Power req.: 11-33 VDC GMA 340 Audio Panel.......................... P/N 11-18960 ...........$1,295.00 GMA 340 with basic harness ............... P/N 11-08061 .............$1,345.00 GMA 340 with Harness (2 place) ......... P/N 11-07172 ............$1,850.00 GMA 340 with Harness (4 place) ......... P/N 11-07170 .............$1,850.00
Monitor ATIS while never leaving your assigned ATC channel. The SL 40 always gives priority to the active channel, meaning youll never miss a transmission. With 10-watt transmit power and only 35-watt DC input, the SL 40 is power efficient and cool running. Features: 760 channels; frequency range 118 to 136.975 mHz; tunes to National Weather frequencies; 16-character, high-intensity, alphanumeric LED display; transmit status indicator; capacity to store and recall 8 user-defined and previous frequencies. SL 40 ................................... P/N 11-02203 ............$1,849.00 SL 40 With Harness ............ P/N 11-08032 ............$1,777.00
Note: Per Garmin we cannot sell the GMA 350 to certified aircraft. For experimental aircraft please contact us for the wire harness form that is required and allow 2-3 weeks to ship. The first truly all-digital audio panel, Garmins GMA 350 introduces a number of new technologies to the cockpit, including voice recognition, 3-D audio processing, advanced auto squelch and more. Features: Intuitive front panel layout with cursor control and volume indicator. Six/Seven position intercom: pilot, copilot, four or five passengers. Three stereo headset amplifiers: pilot, copilot, and passengers. Two stereo music source inputs Five selectable intercom operational modes. Independent pilot, copilot, and passenger volume controls. Individual VOX processing for each mic input. Automatic selection of radio audio source when corresponding mic is selected. Split COM transceiver function. Copilot may transmit and receive on one COM while pilot transmits and receives on another. Voice recognition. Automatic audio adjustment for ambient noise. 3-D Audio. Marker beacon receiver with lamp driver outputs. GMA 350 Audio Panel.......................... P/N 11-09667 .............$1,996.00 GMA 350H Audio Panel ....................... P/N 11-09668 .............$2,246.00
The Garmin GMA 350 can only be sold over the counter to expermental aircraft (must verify) with harness. For certified aircraft, it must be installed by a Garmin Dealer. Please call 1-800-826-3160 for partner shop location for certified installs. (price of installation not included)
A replacement for our GA 29 GPS antenna, this robust and passive antenna is packaged in a low-profile waterproof housing and provides three easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks). Includes surface, pole and under-deck mounting brackets, mounting hardware, antenna cable (32 ft/10 m) and installation instructions. P/N 11-08669 .............................$53.50 Your global positioning system receives its positional information at 1575.42 MHz. The communications radios on-board your aircraft typically broadcast in the 121.5 MHz range. That is a wide separation in frequency bandwidth but its not the complete picture. Your comms are also producing harmonics which can produce significant noise at the GPS frequency. Now you can filter that signal and avoid potentially hazardous situations. A simple low cost way to clean up the receivers frequency environment. The TED 4-70 notch filter installs quickly and easily via standard BNC bayonet couplings, in-line between radios and antenna. The 4-70 rejects in excess of 50dB of 1575.42 signal at the source. Each filter is individually tuned and checked to assure maximum performance. Of course, the 4-70 also passes strenuous environmental criteria so important in aircraft applications. Major GPS manufacturers recognize this problem & recommend using the 4-70 on new and retrofit installation. P/N 11-02204 ............................$96.50
590
HONEYWELL
Solid state, 760 frequency COMM transceiver, 200-channel NAV receiver, 40 channel glidescope receiver and built-in VOR converter, 10W, 14V. Simultaneous, digital, gas-discharge display of active and standby NAV & COMM frequencies or select digital display of radial from the VOR or VORTAC in lieu of standy NAV frequency. Push button frequency flipflop. Meets DO-156 frequency selectivity requirements. 14V............................P/N 11-03399 ......$5,264.00 28V............................P/N 11-00199 ......$5,229.00 Large, self-dimming, microprocessorcontrolled gas discharge readouts and solid-state electronic tuning provide fast, accurate selection of all 200 Nav & 760 Comm frequencies. On the COMM side, the KX165 system gives you 10W minimum transmitter power for maximum range and clarity. And on the NAV side, the KX165s useful Radial feature offers you an instant readout of the radial youre on (from the active VORTAC station), digitally displayed in the standby NAV frequency window. The KX-165A is TSOd and offers 32 channels of com frequency memory, an additional CDI mode. The GPS Quick Tune feature allows the pilot to select and remotely tune the standby com & nav freq. from the KLN94 GPS 28V .. P/N 11-00644 ....$3,395.00 These high-quality, time-tested systems make stay ahead frequency pre-planning effortless. Both the NAV and COMM frequency displays incorporate the popular flip-flop preselect feature. This function allows pilots to set up en route or approach frequency changeovers well in advance of the actual transition point of ATC handoff sequence, for true stay ahead flight management. By selecting the NAV and COMM frequency in the Standby (STBY) display, pilots can flip-flop it into active status at the press of a button. Large, self-dimming, microprocessor controlled readouts and solid-state electronic tuning provide fast, accurate selection of all 200 NAV and 760 COMM frequencies. Both the KX 155 and KX 165 feature a built-in 40-channel glideslope receiver. Both model are also available without the glideslope. KX 155 w/o Glide Slope (14V) ..................... P/N 11-00868 .....$3,952.00 KX 155 w/o Glide Slope (28V) ..................... P/N 11-00869 .....$3,959.00 KX 155 w/Glide Slope (14V) ........................ P/N 11-00871 .....$4,375.00 KX 155 w/Glide Slope (28V) ........................ P/N 11-00872 .....$3,375.00 KX 155 NAV w/KI208 Indicator (14V) .......... P/N 11-03403 .....$5,047.00 KX 155 w/GS & KI209 Indicator (14V) ......... P/N 11-03404 .....$5,899.00 KX 155 w/GS & KI209 Indicator (28V) ......... P/N 11-03406 .....$5,940.00 KX 155 NAV w/KI208 Indicator (28V) .......... P/N 11-03405 .....$4,945.00 Approach KX-155 NAV Cable ...................... P/N 11-05668 ........$139.95 KING KX 155A 28V w/ Install No GS........... P/N 11-04404 .....$4,214.00 KING KX 155A 28V w/ GS & Install ............. P/N 11-04405 .....$4,375.00 KING KX 155A/KI209A w/ GS...................... P/N 11-04406 .....$4,875.00 The KX-125 is ideal as a replacement radio, a primary system for homebuilts or a very affordable back-up. pDespite its low price, it comes with a complete list of features. For example, its COMM section provides 760 frequencies, flip-flop frequency selection, a built-in audio amplifier with sidetone and audio leveling, direct tuning, stuckmicrophone alert, and even remote transfer of both COMM and NAV frequencies. Its separate NAV section offers 200 frequencies, including localizer. 14V ...................P/N 11-03402 ......$3,937.00 With Harness....P/N 11-05026 ......$4,308.00
With the anticipation of additional frequency allocations, Bendix/ King has designed the KY 96A and KY 97A to operate on 760 frequencies from 118.00 MHz to 136.975 MHz. You can switch between active and standby frequencies. Simply tune the desired frequency into the standby window (STBY) while monitoring the USE channel-when the time is right, simply push the frequency transfer button to transfer the standby frequency into the active window. A remote switch may be installed as an additional means of providing the flip-flop function. Up to nine channels can be easily programmed by the pilot into the memory of the KY 96A or KY 97A. The KY 96A & KY 97A remember displayed frequencies and stored frequencies without batteries or external hookup during power shutdown or in the event of a power interruption and have an easy-to-read, illuminated LCD display. KY 96A (28V) ........................................... P/N 11-03411..... $2,984.00 KY 96A (28V) With Harness........................ P/N 11-03849..... $3,030.00 KY 97A (14V) ........................................... P/N 11-03410..... $3,341.00 KY 97A Unit only ......................................... P/N 11-02583..... $2,897.00 KY 97A (14V) With Harness........................ P/N 11-05028..... $3,131.00 Accessories King Install Manual KY96A/97A .................. P/N 11-18005........ $231.95 KY 96A / KY 97A Install Manual CD ........... P/N 11-02374............ $5.95 Harness ONLY for KY 96A ......................... P/N 11-04021........ $229.95 Approach KY 96A / 97A COM Cable .......... P/N 11-05666........ $102.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The KT76A is a panelmount, class 1-A transponder and provides maximum performance at any altitude up to 35,000 ft. A compact unit with Large Scale Integrated (LSI) circuitry, reducing both weight and power requirements. All Mode A & Mode C transponders perform the same functions: replying to radar interrogations, providing Air Traffic Control (ATC) with positive identification, and showing your ground speed on the Controllers radar monitor. If you have an encoding altimeter or blind encoder, the transponder will transmit your altitude as well. KT76A 06 14V (Transponder) .................P/N 11-02438 ......... $1,849.00 KT76A 06 14V With Harness ..................P/N 11-02436 ......... $2,099.00 28V Dropping Resistor ............................P/N 11-00913 ............ $142.95 Replacement Bulb Container ..................P/N 11-00522 .............. $19.95
The KT-76C is the finest panel-mounted Mode A/C transponder to allow for sequential push-button squawk code entry. To ease pilot workload, the push of a single button switches to a user-preset VFR code, such as 1200. Best of all, its bright microprocessor-driven gas plasma display is easily read in all light levels. The new unit features a bright, gas plasma display that shows the selected transponder code and, in a new feature, the encoder altitude output.The KT 76C will fit directly into the existing location of a KT 76A. However, in 28V installations the existing dropping resistor must be bypassed. Unit operates from 11-33VDC. Available with or without antenna. Without KA 61 Antenna...........................P/N 11-03413 ..... $2,804.00 Without KA 61 Antenna With Harness ....P/N 11-05034 ..... $2,879.00 With KA 61 Antenna Without Harness ....P/N 11-03414 ..... $2,979.00 With KA 61 Antenna With Harness .........P/N 11-05033 ..... $3,048.00 This unit measures a trim 1.3 x 6.3 and weighs just 2.8 lbs. The 28V KY196A delivers 16W minimum transmit output power and the 14V KY197A delivers 10W minimum transmit output power. Both units incorporate solid-state construction, with a digital frequency synthesizer generating all COMM frequencies. Despite their wide range of capabilities, the KY 196A and KY 197A were designed to be easy to read and logical to operate. For example, the active frequency is clearly distinguishable from the standby, with both displayed in separate, dedicated windows. Total frequency storage capacity is eleven, including those in USE and STBY. The 118.00MHz to 136.975MHz range of the KY-196A & KY-197A provide 760 COMM frequencies. An audio leveling feature automatically amplifies weak audio signals and mutes strong signals. KY 197A (14V) ............................................P/N 11-03848 ... $4,695.00 KY 196A (28V) ............................................P/N 11-03415 ... $4,305.00 KY 196B 8.33 KHZ Com Transceiver .........P/N 11-03417 ..... $5,295.00
Honeywell Crown Series can only be sold over the counter. Silver Crown series can only be sold to expermental aircraft (must verify) with harness. For certified aircraft, it must be installed by a Honeywell Dealer. Please call 1-800-826-3160 for partner shop location for certified installs. (price of installation not included)
The KI203, KI208, KI204, & KI209 indicators feature an internal VOR/ LOC converter and are compatible with the KX155 transceiver. The KI203 & KI204 have rectilinear meter movement, while the KI208 & KI209 feature pivot needle action. The KI206 has rectilinear meter movement and works with the KX165 & KNS80. The KI209 includes GPS interface capability. Size: 3.125 x 8D; Weight: 1.5lbs. KI 203 NAV Indicator.................. P/N 11-03407 ..................... $2,923.00 KI 204GS Indicator ..................... P/N 11-03408 ..................... $2,962.00 KI 209A GS Indicator ................. P/N 11-03409 ..................... $1,395.00 KI 208 NAV Indicator.................. P/N 11-00876 ........................ $950.00 KI 208A 14/28V with install ........ P/N 11-07599 ..................... $1,695.00 KI 209 GS Indicator .................... P/N 11-00878 ..................... $1,524.00 KI 206 GS Indicator .................... P/N 11-04209 ..................... $2,379.00 Approach KI 204 Indicator Cbl. .. P/N 11-05669 ........................ $102.95
591
With unmatched GPS accuracy, Direct-To operation, built-in CDI output and a host of other pilot-friendly features, the King KLX135 provides the navigation capability youd expect from the leader in panel-mounted avionics. Key features include storage capacity for up to 250 user-defined waypoints and as many as ten flight plans of up to 20 waypoints each; an OBS mode for flying specific radials/bearings; and supplemental calculations for estimated distance, bearing, time & fuel. KLX-135A includes a moving map display of flight plan waypoints, navaids, and special use airspace, in addition to an enhanced high contrast LCD display for easy readability.
Description Part No. Price KING KLX 135A Americas 14V 11-03391 $4,193.00 KING KLX 135A Americas 14V With Harness 11-02018 $3,827.00 KING KLX 135A Americas 14V (Unit Only) 11-02582 $3,089.00 *Antenna NOT included KING KLX-35A ATLANTIC 14V 11-03389 $4,185.00 KING KLX 135A Atlantic 14V W/Harness 11-02724 $4,923.00 KING KLX 135A PACIFIC 14V 11-03390 $3,946.00 Accessories Part No. Price KLX 135A PILOTS GUIDE 006-08789- 0000 $146.95 KING INSTALL MANUAL KLX 135A 006-10500- 0003 $221.95
Bendix/Kings easy-to-use KMA 24 & KMA 24H systems are self-contained, all solid-state and stand only 1.3 high in your Silver Crown stack. The slant top package tailors it for the top slot in your instrument panel. KMA 24 controls as many as 3 transceivers and 6 receivers, including the internal marker beacon receiver and its automatically dimmed 3-light presentation. KMA 24H controls up to 5 transceivers and 5 receivers, or 4 transceivers and 6 receivers. KMA 24H includes the internal marker beacon receiver & VOX intercom, which provides unprecedented flexibility. KMA 24 with HF ............................... P/N 11-03841 ................$1,559.95 KMA 24 with HF Auto ....................... P/N 11-03381 ................$1,559.95 KMA 24 with Tel Auto....................... P/N 11-03382 ................$1,559.95
The KMD 250 is intended for piston singles. The MFD offers most of the advantages of the KMD550 and 850 displays but without the radar and terrain awareness and warning system (TAWS) interfaces, systems the vast majority of singles dont need. KMD 250 is slightly smaller than the 550 or the 850. With a 3.8 diagonal display, compared with the 5 screen of the KMD 550, the size difference is slight. The 250 measures 3 high, compared to 4 for the 550. The software and remaining capabilities on the KMD 250 are nearly identical to those on the KMD 550, so pilots familiar with one of Honeywells other MFDs will have an easy time transitioning to the new hardware. TSO Certified. America with GPS & Harness .... P/N 11-05165..... $4,995.00 America with Harness ................ P/N 11-05167..... $4,517.00 Pacific with Harness ................... P/N 11-05168..... $4,549.00 Atlantic with GPS & Harness ..... P/N 11-05169..... $4,748.00 Atlantic with Harness ................. P/N 11-05170..... $4,549.00 The KLN 35A is a standalone GPS identical to the KLX 135A except without the COMM transceiver. The KLN 35A provides accurate satellite navigation capability with moving map displays for increased situational awareness. It features Jeppesen NavData for data base updates via 3.5 diskette. The moving map display shows flight plan waypoints, navaids, and special use airspace, and the KLN35A has enhanced, high contrast LCD display for optimum readability. The KLN 35A is an outstanding GPS value with the Bendix/King reputation for quality avionics products. KLN 35A (Americas) ............................. P/N 11-03394 ..........$2,832.00 KLN 35A (Atlantic)................................. P/N 11-03392 ..........$2,597.00 KLN 35A (Pacific) .................................. P/N 11-03393 ..........$2,816.00 KLN 35A America with harness ............ P/N 11-02719 ..........$2,646.00 KLN 35A America (Unit Only) ............... P/N 11-02730 ..........$1,781.00
Features: Solid state unit containing funcitons of an isolation transformer and an audio control panel Models availab le that operate on 14 or 28V without power supply section International model available with third COMM switching function for HF transceiver operation (labeled HF instead of EXT, no electrical changes) Push-button Flat pack confguration measuers only 1 in height can be integrated into 500 output audio system Can control as many as 3transceivers and 5 receivers Can be used as passenger address, ramp hailer, or intercom Can be coupled w/KR-22 Marker Beacon Receiver/Lights to provide complete audio panel/marker package 14 or 28V operation TSOd KA 134 Audio Panel ....................................P/N 11-03383 ..... $2,250.00 Install Kit KA 134 W/ Harness .....................P/N 11-00087 ........ $293.95
The Bendix/King KR 22 Marker Beacon Receiver is a fully independent panelmounted unit with its own audio output and self-test feature. The unit is all solid-state, and its compact size makes it an easy fit in virtually any panel.A crystal-controlled superheterodyne receiver and 3-light presentation ensures that the KR 22 will give precise visual and aural indications of marker beacon passage. Excellent receiver selectivity eliminates interference. Headphone audio is provided, or if speaker output is desired, the KR 22 may be interfaced with the KA 134 or other audio control panel. P/N 11-03843 ..... $1,325.00
Honeywell Crown Series can only be sold over the counter. Silver Crown series can only be sold to expermental aircraft (must verify) with harness. For certified aircraft, it must be installed by a Honeywell Dealer. Please call 1-800-826-3160 for partner shop location for certified installs. (price of installation not included)
The KI 208A VOR/LOC Indicator with VOR/LOC Converter and GPS Switching Relays has internal lighting. Internal relays allows from switching between VHF Nav and GPS. It is used with the KX 155 or KX 155A and KLN 89, KLN 89V, or KLN 94. Specifications: * Weight: 1.00 lbs. (0.45 kg) * Width: 3.25 in. (8.26 cm) * Power Required: 14/28 VDC @ 60 mA max. * Height: 3.25 in. (8.26 cm) * Length: 8.00 in. (20.32 cm) * Lighting Power: 14/28 VDC P/N 11-07599 ......................................................$1,695.00
PS BV
KMA 24H-52 KMA 24H-70/71 KA 51B KN 53 KN 62A/64 KN 63 KN 72 KT 76A KT 76A / 76C KNS 80 KR 86 KR 87 KLN 90B
KDI 572
592
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
**Note: Unit is not TSOd (non-certified)** A210 25 Comm Transceiver (replaced version A210 21). New version is now capable of 25kHz and 8.33kHz channel pitch. The new A210 25 will use the CS A210 version 1.3. Older software will not work for programming the new versions. The software is backwards compatible. Innovative airband thats easier to install and see in more places! Large, bright OLED display offers many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. Easy channel selection allows you to monitor two channels simultaneously. GPS memory function. 12V/24V DC power source. Intercom functions. The IC-A210 has a built-in voice activated intercom function allowing the pilot to talk with the copilot via the headset. The IC-A210 has adjustable audio level and squelch control functions. Easy installation. The IC-A210 neatly fits inside the common mounting brackets used on most airplanes including Icoms IC-A200. Two types of rear-panel adapters are included, allowing for streamlined plug-in connectivity. Description ICOM A210 Panel Mount ICOM A210M Mobile Mount Part No. 11-05618 11-05836 Price $1,499.99 $1,699.99
MB-113 Rear Panel Adapter - For installation into a D-sub 15-pin connection system equipment. P/N 11-08413 .............$66.50
The PS-80 offers quick, easy installation of the IC-A210 in one compact desk-top unit that combines a power supply, speaker, microphone, headphone and antenna connectors. Power Supply is user selectable for 110 or 220/240 V AC operation and supports a full 7 Watt transmitter output. Large internal speaker booms out 5 watts of audio. Microphone, headphone and antenna connectors are standard in the PS-80 so no wiring is necessary. Just plug in your selected hand or desktop microphone or headphone and outside antenna and youre on the air. Optional SM-6 Desktop Microphone, HM-7 or MIC Hand Microphone and B-ANT Base Station Antenna to complete the package are available and sold separately. Radio not included (use 11-05839 for complete system) Specifications: * Input voltage: * 117 V AC +/- 10%, * 220 V AC +/- 10%, or * 240 V AC +/- 10% (selectable) * Output voltage: 13.8 V DC +/- 5% (negative ground) * Output current: 6 A * Duty rate: 1 hour for maximum current * Ripple voltage: Less than 20 mV rms * Useable Temperature Range: -10C to +40C; +14F to +104F * Dimensions (projections not included): 200(W) x 200(H) x 300(D) mm; 7.9(W) x 7.9(H) x 11.8(D) in * Weight: 6.0 kg; 13.2 lb Icom PS-80 Base Station Only....................... P/N 11-00802 ..... $735.00 Icom IC A210 COM Panel Mount(not TSOd) . P/N 11-05618 .. $1,499.99 Icom IC A210 & PS 80 Base Station ............. P/N 11-05839 .. $1,999.99 Icom A210B PS-80 Microphone ..................... P/N 11-18581 ..... $189.95
The MX 11 Comm is designed as a slide in replacement for the Narco Com 11, Com 11B, Com 111, Com 111B, and Com 120. The unit will replace the com 10 and Com 110 when the Nav 10 and Nav 110 are not used in the system. The MX 11 is warranted for 2 years. The MX 11 is the same unit as the earlier MX \-11 except it does not come with the tray. P/N 11-18815 .........$895.00 Direct replacement for Narco MK12A Nav/Com. P/N 11-18846 ......$1,575.00
MX 12 NAV/COM
An ideal Nav/Com unit to replace King KX 170 & 175 series Nav/Coms. 14VDC. Features active & standby display w/flip-flop capability, plus storage capability in Nav and Com. P/N 11-18830 ......$1,495.00 The MX 300 Nav/Comm is designed to replace the RT 328T, RT 308C, RT 328T, RT 328A, RT 528A, RT 328C, RT 528E, RT 328D, and RT 508A. The MX 300 is available in the black face plate shown above or in a beige face plate to match many Cessna panels. The MX 300 operates on 13.75 vdc with 7 Adc maximum current in transmit. With Black Face Cover.......................... P/N 11-18835 ...........$1,635.00 With Tan Face Cover ............................ P/N 11-04825 ...........$1,595.00 MX 385 is a direct replacement for RT385 & RT485 series Nav/Com units. Features active & standby displays w/flip-flop capability plus storage in Nav & Com.; 28VDC. Black Face............................................. P/N 11-18845 ...........$1,595.00 Tan Face ............................................... P/N 11-09203 ...........$1,595.00 Note: All Michel radios are furnished standard with black face. Tan face for Cessna panels are available at same prices on special order. At last, it is back! The MG-200 Glide Slope Receiver, a marvel of avionics engineering from TKM. Measuring only 3 inches wide by 6 inches long by 1 inch high, this 40 channel, totally solid state receiver is capable of handling your Nav/Com needs. Using standard 25 DB connectors, it is easy to wire and install. Just wire the connector, plug it in, mount the receiver with four fasteners and run the wires to the receiver. That is it except the paperwork! P/N 11-06868 ...........................$933.00
MX 300 NAV/COM
The Icom IC-A110-05B is rugged and reliable for serious ground crew communications. The IC-A110-05B can plug right into an AC wall (110W) receptacle. Great for FBOs. The unit features a front mounted speaker, free from any obstacle blocking and puts out 10W of power for the external speaker. *Covers the 118-136.975 frequency range. Features: * Equipped EEPROM system provides maintenance free memory backup capability, without the use of a separate backup battery * Various scan functions, such as VFO and priority scans are available * Limited number of keys for simple manipulation, but providing advanced multi-functions * A total of 20 memory channels are available * 36 W (pep) of powerful output, 9W (Carrier) output. * Excellent durability to cope with even the toughest workplace Specifications * Dimensions: 150(W)x 50(H) X 180(D) mm * Weight: 1.5kg; 3lb. 5 oz. * Warranty 2 years * Power supply requirement: 13.75 VDC and 27.5 VDC * Current drain: Transmitting: 5.0 A max, Receiving: 4.0 A * Operating temperature range: IC-A110(-30 C to +60 C); IC-A110EURO(-20 C to +55 C) * Frequency stability: IC-A110 (5 ppm) Icom IC-A110-05B Base Station...................... P/N 11-02781 .$1,099.99 Icom B-ANT Building Antenna ......................... P/N 11-18581 ....$189.95 Icom K220A Magnetic Mount Car Antenna ..... P/N 11-06196 ......$52.50 Icom K220C Hole Mount Car Antenna ............ P/N 11-06197 ......$33.75 Icom OPC-871 Headset Adapter ..................... P/N 11-06198 ....$123.95
MX 385 NAV/COM
593
The STX 165 Sports a professional 1/2 3ATI Bezel that compliments any aircraft panel. Its bright OLED display is readable in virtually all lighting conditions and automatically dims for night time operations. Check out just a few of the STX 165 features. Built-in Encoder: Simplifies installations and lowers cost. Three Timer Functions: Elapsed Flight Time, Up Timer, Down Timer Pressure Altitude Display: See what altitude your transponder is reporting to Center Optional OAT Probe Input: Displays Outside Air Temp.,Density Altitude, Icing Alert Small and Light Weight: 7.4 behind the panel depth, 1.3 lbs. Specifications: Electrical Input Voltage: 11-33 Vdc Current Requirements: 500mA@28Vdc Power Output: 200 Watts Nominal Transmitter Freq: 1090 MHz Receiver Freq: 1030 MHz Receiver Sensitivity: -74dBm Nominal at 90% reply rate Dimensions: 1.78H x 3.5W x 7.34L Weight: 1.30Lbs Alt. Encoder: Built-in 35K Encoder; External RS-232 OAT Probe: Sandia STP 78 (Optional) Temperature: -20 degrees to +55 degrees C Altitude: -1000 to 35,000 Ft. Certification: DO160F; DO178B Level C; TSO C74d; TSO C88a Sandia STX 165 Panel Mount .....................P/N 11-09251 ......$1,588.00 Sandia STX 165R Remote ..........................P/N 11-09252 ......$1,634.00 Sandia STX 165 OAT Option ......................P/N 11-09253 .........$329.95
The Garrecht Transponder VT-01 is a flexible and modular system concept, in a compact size (57mm) with a very low current and integral alticoder. Available as Class-1 (125 Watt) or Class-2 (71 Watt) System. Specifications: Cetification i.a.w: ETSO-2C112a, ED-73B VT01 Min. RF Output power @ UltraCompact Antenne: Class 1: 125 Watt Class 2:71 Watt. Integral alticoder: Yes Weight control unit: 0,21 kg. Weight main unit: 0,61 kg Supply voltage: 9-32 V DC Power consumption (operation) @ 13,8 V (1200 Mode A/C or 50 Mode-S replies): Class 1: 0,24 A Class 2:0,22 A Power consumption (on Ground) @ 13,8V (Squitter active): Class 1: 0,17 A Class 2: 0,16 A Power consumption (Standby) @ 13,8 V: 0,005 A Interfaces: RS232 + CAN OPERATIONAL LIMITS Max. Altitude: Class 1: 40.000ft Class 2: 15.000 ft (4.572 m) Max. TAS: Class 1: 250 kts (463 km/h) Class 2: 175 kts (324 km/h MTOW: Class 1: 5.700 kg Class 2: 5.700 kg Transponder Class 1 ............................ P/N 11-04529 ............$3,617.00 Transponder Class 2 ............................ P/N 11-04530 ............$2,396.00 Transponder UltaCompact Class 1 ...... P/N 11-05869 ............$2,247.00 Transponder UltaCompact Class 1 ...... P/N 11-05870 ............$2,986.00 The KRT2 VHF-AM transceiver has a full graphic LC-display that allows for easy reading under all light conditions, including full sun. Push button and display illumination can be dimmed. The KRT2 is, of course, prepared for 8.33 kHz spacing that will become the new international standard for airborne communication. Switching between the 8.33 and the 25 kHz mode is therefore made effortlessly simple. Standard or dynamic microphones can be used. A built-in-test facility increases flight safety. The dual watch mode that allows scanning of two different channels is included. The KRT2, with its integrated VOX/Intercom circuit, allows communication between pilot and co-pilot. Specifications: Frequency Range: 118.000 MHz to 136.990 MHz Channel Selection: 8.33 or 25 kHz (select automatically) RF-Output Power: >6 W (carrier power) Receiver Sensitivity: >12 dB sinad @ 2 uV Input Voltage Range: 9 V DC to 36 V DC Operating Temperature Range: -20C to +55C, for short time up to +70C Current Consumption: 1,6 A@12 V DC (transmit), 110mA@12 V DC (receive standby) Certification: ETSO-2C169a, ED-23B Class 4, C, TSO-C169a, Class 6, H1 & H2 Function: dual watch mode, integrated VOX/Intercom Weight/dimensions: 360g /65 x 65 x 144 (+plugs) mm. Transceiver ........................................... P/N 11-10691 ............$1,465.00 Harness with open end ........................ P/N 11-10692 ...............$146.00 Harness with jacks for dual seat .......... P/N 11-10693 ...............$179.00 Swan Neck Mic..................................... P/N 11-10694 ...............$154.00
594
CM WP
3M
3M WX-10 Stormscope 3M WX-10A Stormscope 3M WX-11 Stormscope 3M WX-8 Stormscope 11-06005 11-06006 11-06007 11-06008
KING CONT.
King KLN-94 IFR-Approach GPS / Moving Map unit only King KLX-135A VFR GPS King KMA-20 Audio Panel & Marker Beacon Receiver King KMA-24 Audio Panel & Marker Beacon Receiver King KMA-24H (-50 Series) Audio Panel and Intercom King KMA-24H (-70 Series) Audio Panel and Intercom King KMA-26 Audio Panel, King KN-53 NAV Receiver King KN-53 NAV Receiver with Glidescope King KN-62 DME King KN-62A DME King KN-62A DME (-01 Version) King KN-64 DME King KNI-520 GPS / VOR / LOC / Glidescope Indicator King KNS-80 NAV / RNAV / DME / Glidescope Receiver King KNS-81 NAV / RNAV / Glidescope Receiver King KR-21 Marker Beacon Receiver King KR-22 Marker Beacon Receiver King KR-85 ADF Receiver King KR-86 ADF Receiver and Indicator King KR-87 ADF System with Non-Slaved KI-227 Indicator King KR-87 ADF System with Slaved KI-227 Indicator King KT-70 Mode S Transponder King KT-71 Transponder King KT-76 Transponder King KT-76A Transponder King KT-76C Transponder King KT-78 Transponder King KT-78A Transponder King KT-79 Transponder King KX-125 NAV / COMM / Indicator King KX-155 NAV / COMM, 14 Volts King KX-155 NAV / COMM, 14 Volts with Glidescope King KX-155 NAV / COMM, 28 Volts King KX-155 NAV / COMM, 28 Volts with Glidescope King KX-155A NAV / COMM with Glidescope King KX-165 NAV / COMM, 14 Volts King KX-165 NAV / COMM, 14 Volts with Glidescope King KX-165 NAV / COMM, 28 Volts King KX-165 NAV / COMM, 28 Volts with Glidescope King KX-170B NAV / COMM King KX-175B NAV / COMM King KY-196 COMM Transceiver King KY-196A COMM Transceiver King KY-196E COMM Transceiver King KY-197 COMM Transceiver King KY-197A COMM Transceiver King KY-96A COMM Transceiver King KY-97A COMM Transceiver 11-06084 11-06085 11-06086 11-06087 11-06088 11-06089 11-06090 11-06091 11-06092 11-06093 11-06094 11-06095 11-06096 11-06097 11-06098 11-06099 11-06100 11-06101 11-06102 11-06103 11-06104 11-06105 11-06106 11-06107 11-06108 11-06109 11-06110 11-06111 11-06112 11-06113 11-06114 11-06115 11-06116 11-06117 11-06118 11-06119 11-06120 11-06121 11-06122 11-06123 11-06124 11-06125 11-06126 11-06128 11-06129 11-06130 11-06131 11-06132 11-06133 11-06134 11-06135 11-06136 11-06137 11-06138 11-06139 11-06140 11-06141 11-06142 11-06143 11-06144 11-06145 11-06146 11-06147 11-06148 11-06149 11-06150 11-06151 11-06152 11-06153 11-06154 11-06155
ME HA AP LG EP CS IN EL AV TO PS BV
ARC
ARC (Cessna) IN-385A ARC (Cessna) IN-386A ARC (Cessna) IN-514B ARC (Cessna) IN-525B ARC (Cessna) R-446A ADF Receiver ARC (Cessna) RT-328T NAV / COMM ARC (Cessna) RT-359A Transponder ARC (Cessna) RT-385A NAV / COMM ARC (Cessna) RT-459A Transponder ARC (Cessna) R-485B NAV / COMM ARC (Cessna) R-443B Remote Glideslope Receiver 11-06009 11-06010 11-06011 11-06012 11-06013 11-06014 11-06015 11-06016 11-06017 11-06018 11-06019 11-06020 11-06021 11-06022 11-06023 11-06024 11-06025 11-06026 11-06027 11-06028 11-06029 11-06030 11-06031 11-06032 11-06033 11-06034 11-06035 11-06036 11-06037 11-06038 11-06039 11-06040 11-06041 11-06042 11-06043 11-06044 11-06045 11-06046 11-06047 11-06048 11-06051 11-06052 11-06053 11-06054 11-06056 11-06057 11-06058
ARNAV
ARNAV STAR 5000 VFR GPS Navigator
CENTURY
Century NSD-360A Non-Slaved Compass System (HSI) Century NSD-360A Slaved Compass System (HSI)
COLLINS
Collins ADF-650 ADF System Collins ADF-650A ADF System Collins GLS-350 Remote Glidescope Receiver Collins IND-350 GPS / VOR / LOC Indicator Collins IND-350A GPS / VOR / LOC Indicator Collins IND-351 GPS Collins IND-351A GPS Collins IND-650 ADF Indicator Collins IND-650A ADF Indicator Collins MKR-350 Marker Beacon Receiver Collins RCR-650 ADF Receiver Collins RCR-650A ADF Receiver Collins TDR-950 Transponder Collins VHF-251 COMM Transceiver Collins VIR-351 NAV Receiver
GARMIN
Garmin GI-102A Garmin GI-106A Garmin GNC-250 VFR Garmin GNC-250XL VFR Garmin GNS-430 - 14 or 28 Volts Garmin GNS-430 IFR - 28 Volts Garmin GNS-530 IFR Garmin GPS-150 VFR Garmin GPS-150XL VFR Garmin GPS-155 IFRGarmin GPS-155XL IFR Garmin GTX-327 Transponder II Morrow / Garmin AT Apollo 360 Map Moving Map II Morrow / Garmin AT Apollo 360 VFR II Morrow / Garmin AT Apollo 820 Flybuddy VFR II Morrow / Garmin AT Apollo GX-50 IFR II Morrow / Garmin AT Apollo GX-55 IFR
L-3
L-3 (Goodrich) WX-1000 Stormscope L-3 (Goodrich) WX-1000+ Stormscope L-3 (Goodrich) WX-900 Stormscope L-3 (Goodrich) WX-950 Stormscope
MCCOY
McCoy MAC-1700 NAV / COMM McCoy MAC-1700 VTX NAV / COMM
INSIGHT
Insight Strike Finder
NARCO
Narco AT-150 Transponder Narco AT-50 Transponder Narco AT-50A Transponder Narco COM-810 COMM Transceiver Narco COM-811 COMM Transceiver Narco DME-890 DME Narco ID-824 VOR / LOC Indicator Narco ID-825 VOR / LOC / Glidescope Indicator Narco MK-12D NAV / COMM ARC (Cessna) Replacement Narco MK-12D NAV / COMM with Glidescope Narco MK-12E NAV/COMM ARC (Cessna) Replacement Narco MK-12E NAV/COMM with Glideslope Narco NAV-121 VOR / LOC Indicator / NAV Receiver Receiver / NAV Receiver / Marker Beacon Receiver and Indicator
KING
King KA-134 Audio Panel King KA-44B ADF Loop / Sense Antenna King KCS-55A Compass System (HSI) King KCS-55A Compass System (HSI) with Bootstrap Output King KDI-527 DME Indicator King KI-201C VOR / LOC Indicator King KI-202 GPS / VOR / LOC Indicator King KI-203 VOR / LOC Indicator King KI-204 VOR / LOC/ Glidescope Indicator King KI-206 GPS / VOR / LOC / Glidescope Indicator King KI-208 VOR / LOC / Glidescope Indicator King KI-209 VOR / LOC / Glidescope Indicator King KI-209A GPS / VOR / LOC / Glidescope Indicator King KI-211C VOR King KI-214 VOR King KI-227 ADF Indicator (Non-Slaved -00 Version) King KI-227 ADF Indicator (Slaved -01 Version) King KLN-89 VFR GPS Navigator King KLN-89B IFR-Approach GPS / Moving Map King KLN-90A IFR-En Route GPS / Moving Map King KLN-90B IFR-Approach GPS / Moving Map King KLN-94 IFR-Approach GPS / Moving Map System 11-06059 11-06061 11-06062 11-06063 11-06064 11-06066 11-06067 11-06068 11-06069 11-06071 11-06072 11-06073 11-06074 11-06075 11-06076 11-06077 11-06078 11-06079 11-06080 11-06081 11-06082 11-06083
SANDEL
Sandel SN-3308 Electronic HSI (EHSI)
TERRA
Terra TRT-250D Transponder
TKM
TKM MX-11 COMM Transceiver TKM MX-170B NAV / COMM TKM MX-300 NAV / COMM TKM MX-385 NAV / COMM 11-06156 11-06157 11-06158 11-06159
595
Remote mounted 24-pole unit features eight Nitrogenfilled relays (3 poles per relay) with Gold-plated contacts Ideal for GPS/VOR transfer and audio switching applications. Relays are activated individually by voltage or ... ground keying or as a group by ground keying. FAA PMA Approved (certified to 55,000 ft.) Versatile Mounting - Horizontal, Vertical or flat mount configurations. Fail-safe fault monitoring through interlocking of all internal relays. Adjustable dimmer output for external annunciations. Quality MIL-SPEC connector kit included. Specifications: Width: 2.86, Height: 1.52 , Depth: 2.6, Weight: .75lbs Remote Relay Unit 14VP/N 10-02125 .............. $848.00 Remote Relay Unit 28V......................P/N 10-02127 ................. $848.00 The AvMaster Relay is the first and only self contained, fail-safe, avionics master relay package to protect expensive radio tear at an affordable price. The AvMaster Relay is installed between the power bus and the protected radios. The Avionics Master Switch then controls the AvMaster Relay only and not the radios directly. Not only does the AvMaster Relay protect the system from transient electrical spikes during normal operations, its four parallel relay controlled, surge protected circuits allow for individual fusing that separate all radios from each other. The avionics master switch is a great idea. It protects against the large power surge potential during start up and shut down. Its also useful to prevent premature wear of each radios switches and allow the benefit of maintaining the volume settings. But, it has a major weakness. An Avionics Master Switch becomes a potential single point of failure. If it fails, ALL radios shut down! A second Avionics Master Switch has been used as the solution to this problem. However, this offers no spike protection while on and it still connects all radios together. An overload in one radio can potentially spill over to the whole avionics circuit and take them all out. The fail-safe design of the AvMaster Relay eliminates the need for a backup Avionics Master Switch. If the Avionics Master Switch ever fails, the pilot wont even realize it until after the flight is over and the Avionics Master Switch doesnt shut down the radio stack. The radios will just be controlled individually until the problem is resolved. The AvMaster Relay will pay for itself with fewer repairs over the increased lifetime of the avionics stack. 14 Volt ................................... P/N 11-04857 .............................. $148.95 28 Volt ................................... P/N 11-04858 .............................. $126.95 FAA TSOd approved remote Relay Assembly. It is designed to provide Switching Function, for HSI / CKE Data Inputs, between NAV (VOR) Receiver and the approached certified GPS receiver. The Assembly consists of a 24 pole buit-in relay to simplify installation of the Switching Function. All Relays have gold-plated contacts and are Nitrogen filled for high reliability. Consists of 2 sub-groups, A & B. Subgroup A includes 20 poles switching; A failure detection pole built in; and an ILS auto override (to reverse to NC (NAV) position upon ILS frequency is turned in). Subgroup B includes 2 poles switching. Each subgroup is controlled independently. Protection includes input power reverse polarity, power transient. All relay coils are protected against EMI and transient switching. Installation is extremely simple. All necessary hardware is provided. AK-950-R8-14V 8 Poles Relay Assy. ......... P/N 11-01407 .... $148.95 AK-950-R8-28V 8 Poles Relay Assy. ......... P/N 11-01408 .... $148.95 AK-950-R12-28V 12 Poles Relay Assy. ....... P/N 11-01409 .... $223.95 AK-950-R12-14V 12 Poles Relay Assy. ....... P/N 11-01410 .... $212.95 AK-950-R24-14V 24 Poles Relay Assy. ....... P/N 11-01411 .... $355.95 AK-950-R24-28V 24 Poles Relay Assy. ....... P/N 11-01412 .... $355.95 AK-950-R48-14V 48 Poles Relay Assy. ....... P/N 11-01413 .... $639.00 AK-950-R48-28V 48 Poles Relay Assy. ....... P/N 11-01414 .... $639.00 9500001B Connector Kit, 78 female mach. pins, crimp type Assy. P/N 11-01415 ...... $28.25 The AN-21 is a light and warning tone generator for use in experimental aircraft. A total of twenty-one circuits can be monitored, sixteen channels are activated by ground and five by positive input. Each channel activates a light and emits a warning tone when triggered. The AN-21 also includes a Windows Programming Utility to enable the user to configure it for each specific installation. Each channel, when activated, has an associated user programmable output which can be programmed to do the following: Steady light, Flashing light, Alert Tone with steady or flashing light. Features: Master Caution - User selected channels can trigger a Master Caution Annunciator Test Function - Causes all lamps to illuninate to check the bulbs Dim - Causes all Lamps to illuminate a selected lower brightness for night operation. P/N 11-04701 ................. $298.00
Features: 3 in. model fits standard panel cutout. Lighted. All-metal construction with ball bearings in critical areas FAA TSO and ETSO approved for use with all GPS and VOR systems High-quality rectilinear meter movements Annunciations for NAV, GPS and Back Course True course resolver output Pin-for-pin replacement for Collins Micro Line IND 350 Series CDI Can be used to replace old-style navigation indicators Compatible with WAAS GPS receivers Quality Mil-Spec connectors included Specifications Voltage input: 14 VDC or 28 VDC Current input: 0.3 amps max Standard cutout (3 1/8-inch round) Weight: 1.4 lbs. Altitude: 0 to 55,000 ft. Rear mount panel mounting MD200-302 CDI .................................. P/N 11-10022 .............$1,420.00 MD200-303 CDI Course Deviation...... P/N 11-10023 .............$1,610.00 MD200-307 CDI Glideslope Course Deviation P/N 11-10024 .............$2,364.00
596
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Lone Star Aviations new 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile avionics cooling fan in our industry today. This New blowers universal mounting bracket makes it easy to set-up and install on a verity of aircraft Install immediately on experimental, sport and soon on general aviation, business, rotor-craft, commercial class aircraft as well as Land-Mobile, Marine and Military Vehicles. Specifications: * Light Weight: 52 grams, 0.115 lbs * Enclosure: Aluminum, (powder coated) * Vdc, amperage: 12 = 10.215.8Vdc, 0.320ma * Vdc, amperage: 24 = 18.2-28.5Vdc, 0.300ma * 1 port = 5/8 inch x 1.0 * Max Static pressure: H2O = 0.64 * Max Air Flow: 6.7 CFM * Universal Mounting Bracket: (4)(mt)(h) * Operating Temp: -55C to +70C * FAA-PMA (pending), 6-30-08 * Ultra-Small Size: 2.0H x 1.00W x 2.0L * Easy Installation: (4 x 6-32) * 1 year Limited Warranty Description Part No. Price Lonestar 12 VDC Blower Kit LS03-02040 11-06567 $129.95 Lonestar 24 VDC Blower Kit LS03-02041 11-06568 $129.95
The ACF528 is a FAA-PMA'd five port cooling fan that produces cooling air for one to five avionics units. Supplying up to 20 cubic feet of air per minute at 28 Vdc, the ACF528 can easily cool an entire stack of avionics. The ACF528 uses a brushless blower motor to provide years of reliable RunQuiet operation. Specifications: * Operating Voltage: 28Vdc * Current Draw: 480mA (850mA startup) * Size: 5.13" x 6.77" x 2.1" * Weight: 1.18 lbs * Certification FAA-PMA: DO160C P/N 11-08020 ....................$265.00
The AK950-FTR RFI DC line filter is the only TSO approved RFI filter available. The AK950FTR was designed to replace all Hisonic RFI filters. It replaces Hisonic RFI-40, RFI-70, and RFI-100 filters. Works on 40-100 amp operation, working voltage is 30VDC. FTR1 designed to reduce noise from alternator or generator. AK950-FTR (pictured) .................................P/N 11-00182 ...........$96.75 AK950-FTR1................................................P/N 11-00183 ...........$78.75
The ACF 314 and ACF 328 simultaneously cool up to three avionics units. Operating on 14Vdc and 28 Vdc respectively the ACF 314 and ACF 328 supply up to 20 cubic feet of cooling air per minute, helping maintain your avionics at a proper operating temperature. SANDIA Aerospace cooling fans use high quality, brushless blower motors and or RunQuiettm technology. These units are FAA PMAs and have passed stringent envrionmental testing to ensure years of reliable service. Specifications: Operating Voltage: 14Vdc Current Draw: 960mA (1.7A at startup} Size: 5.18 x 5.18 x 2.1 Weight: 1.18 lbs. P/N 11-06345.......................... $179.85
The SAFE 128 is an axial fan that is designed to attach directly to an avionics units cooling port. Providing a nominal 20 CFM (no load) of cooling air. The SAFE 128 provides an alert output whenever the fan RPM drops below a preset level. Specifications: * Voltage: 28 Vdc * Current Draw: 100mA nominal <.250mA Startup * Size: 2.36 x 2.87 x 1.44 * Weight: .25 lb. * Certification: PMA,DO160D * With Fault Detention P/N 11-08019 ....................$185.95
The SAFE 528 is a five port cooling fan that provides a fault output anytime the fan RPM drops below a predetermined value. The SAFE 528 is ideal for use with flight display systems that require cooling as part of the certification. The SAFE 528 uses a brushless DC motor to provided 20 cubic feet of air with reliable RunQuiettm operation. Specifications: * Operating Voltage: 28Vdc * Current Draw: 400 MA Nominal (550MA stratup) * Size: 5.13 x 6.77 x 2.1 * Weight: 1.23 lbs. * Certification: FAA-PMA Pending P/N 11-08017 ....................$549.95
597
XCOM TRANSCEIVERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Glider Speaker - Clear sound and easy to understand 5 watts output 8 ohm. P/N 11-05676............................$46.50 Designed from the ground up the XCOM offers superior performance under the demanding and noisy conditions experienced in many amateur built aircraft. With low power consumption this radio is ideally suited to use in gliders, homebuilts, and ultralights. A full 6-Watt carrier and 20 Watt PEP output ensure that you will be heard above the general chatter in a busy airspace and the VOX intercom system with music input will enhance your enjoyment of the flight. With expanded receive range from 108 MHz, the XCOM760 provides NOAA Weather reception ensuring that you are always aware of impending weather conditions. The XCOM 760 will also operate down to a 108 MHz so you can receive the VOR channels. Additional safely enhancements such as duel watch allows the pilot to listen to the standby frequency while still monitoring the primary frequency. The XCOM 760 also has 99 memory channels, large volume and channel selector knobs and well spaced buttons. This radio is extremely easy to operate even when wearing flight gloves and you can even check the condition of your battery with the built in voltage monitor. Software update capability and Internet downloads mean that you are always provided with the latest features. The XCOM 760 offers superior quality, enhanced features and improved performance over many of the more expensive airband radios, without the high cost found in other brands. FEATURES: New easier to read LCD screen Several software updates Memory scanning of up to 99 memory channels Streamlined software increasing reliability and performance Music/Second comm input is now user selectable for another VHF, UHF or Music input Added sidetone volume adjustment Improved AGC controls for close and powerful stations Improved speaker output for glider operations 760 VHF Panel Mount .....................P/N 11-02206 ................. $1,495.00 Side by Side Standard Harness ......P/N 11-07387 .................... $349.95
he newest addition to the XCOM range is the XCOM VHF Remote Head option. Interfacing with the XCOM VHF, this tiny unit provides remote access to all of the capabilities of the XCOM VHF Radio in one quarter of the space. Ideal for training situations, tandem seat aircraft, limited space installations or simply to provide easy access for both pilot and co-pilot, this unit duplicates the entire XCOM VHF display and provides full access to all functions (except power on) from the front panel of the radio. The connection between the remote head and the XCOM VHF radio is via a simple cable allowing all of the controls on either panel to be duplicated on the remote. When the master unit is changed, the remote head follows and vice versa. For example, if the pilot in the front seat of the aircraft adjusts the radio to 123.450 then the remote display also adjusts to show 123.450. If the toggle button is pressed on the remote, then the frequencies are toggled on both units. All of the XCOM features apart from powering on can be duplicated with a remote head option. The remote head is extremely small, being less than 1 1/2 deep (40mm), allowing it to be installed in places where the XCOM will not fit such as in the very tight confines of the panel in the Pitts Special P/N 11-04399 ........ $504.00
Instructional DVD explaining the complete operation and set-up of the XCOM VHF Transceiver. 30 minutes duration. P/N 11-05674 ............ $4.20
Designed for the XCOM VHF aircraft transceiver but equally suitable for any other radio or instrument with the same 2 1/4 inch mounting hole. Can also be used in the Marine or automotive environment. Manufactured from 2 mm thick 304-2B grade stainless steel for strength and corrosive resistance. Two 6.5 mm holes are provided for conveniently mounting switches such as the intercom ON/OFF/Isolate and the backlight switch. Blanking plugs are factory fitted to maintain the appearance if the holes are not used. Can be installed in any orientation e.g. left, right, top or bottom; switches can be mounted horizontally or vertically. P/N 11-05678 .......... $73.00
The Power Mate regulator is designed to provide a clean DC power source to charge a 12Volt battery when connected to a single phase alternator found on Rotax and Jabiru engines. The output voltage is electronically stabilised and preset to a maximum output voltage of 14.5 V. @ 8 Amps. The Power Mate has inbuilt overload protection and is supplied with a 15 amp fuse and mounting instructions. Used on hundreds of aircraft worldwide with fantastic results removing engine electrical noise. Short circuit proof, overheating and over voltage protected, water and vibration proof, extends battery life. P/N 11-05673.......................... $354.95
This water jet cut bracket is ideal for mounting two XCOMs side-by-side in a normal aircraft rackmount system. Cut to the exact size required it will save you time and trouble in fitting a dual XCOM system to your aircraft. Comes mill finish in 2 mm aluminium ready for painting. P/N 11-05679 .......... $42.75
Switch mode voltage converter with soft shutdown and intelligent control. Input Voltages 15 to 38 Volts, Output 13.2 Volts 7 amps. Compact, efficient, short circuit protected, reverse polarity protected, overload protected. Perfect for warbirds. Made in the UK. Lightweight 195 grams (6.8 oz), Mounting bracket supplied. P/N 11-05680.......................... $210.95
Boom Microphone - More than 1200 made and used all over the world, 3 year guarantee. P/N 11-05675..........................$166.95
Seamlessly connect a Stereo or Mono Video Camera, Tape Recorder or Digital Voice Recorder into your aircraft headsets and record all communications between the Pilot and Co-Pilot, ATC and other Aircraft. Perfect for making your own aviation videos with crystal clear narration, flight training or many other uses. P/N 11-05658............................ $54.25
Electrolytic Capacitor - 22, 000 uF 25V and absolute requirement to prevent regulator spikes on Rotax, Jabiru and other engines, the manufacturer recommend installing the electrolytic capacitor in nearly every installation to help protect your radio and other avionics from overvoltage. P/N 11-07992 .............................$69.50
ELECTROLYTIC CAPACITOR
598
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The TRA 3000 Radar Altimeter, combined with the TRI40 Radar Indicator, provides precise AGL information from 2,500 feet down to 40 feet. This real-time system offers an extra measure of operational safety during landing, navigation, and hovering. It is especially useful in flying search and rescue missions, forestry operations, pipeline maintenance, offshore helicopter operations, aeromedical emergency medical services, border patrol, and electronic news gathering operations. The transmitter / receiver and antenna fit in a single lightweight & aerodynamic unit that is easy to install. TRA 3000 with TRI 40 ...........................P/N 10-02519 ........... $5,978.00
For critical flight regimes, the new TSO-certified RA-4000 Radar Altimeter provides todays pilots with highly accurate and reliable above-groundlevel (AGL) information. This real-time system enhances operational safety during approaches, nighttime operations, and hazardous flight above rough terrain. One of our newest radar altimeters, the RA-4000 is especially valuable when flying search and rescue missions, forestry operations, pipeline maintenance, off shore helicopter ops, aero-medical emergency services, border patrol, and electronic news gathering operations. The RA-4000 Radar Altimeter is designed to be easily integrated with electronic flight information systems (EFIS), flight director systems, and terrain awareness and warning systems (TAWS), possessing serial inputs. Proven and precise, the RA-4000 offers improved situational awareness for a broad range of fixed and rotary wing aircraft. Designed for applications where accuracy is needed down to zero feet, such as helicopter and seaplane operations, the RA-4000 provides precise AGL information from 2000 feet down to ground level. RA-4000 ................................................P/N 10-03976 ......... $11,376.00
For critical flight regimes, the new FreeFlight Systems RA-4500 Radar Altimeter (TSO-C87) provides todays flight crews with dependable, highly accurate and economical above-ground-level (AGL) information. This real-time system enhances operational safety during approaches, nighttime operations, and hazardous flight above rough terrain. The newest radar altimeter model, the RA-4500 is especially valuable when flying search and rescue missions, forestry operations, pipeline maintenance, off shore helicopter ops, helicopter emergency medical services (HEMS), other aero-medical emergency services, border patrol, and electronic news gathering operations. The RA-4500 Radar Altimeter with its ARINC 429 output can be easily coupled with modern electronic flight information systems (EFIS), flight director systems, and Terrain Awareness and Warning Systems (TAWS). Proven and precise, the RA-4500 offers improved situational awareness for a broad range of fixed and rotary wing aircraft. Designed for applications such as helicopter and seaplane operations where accuracy is needed down to zero feet, the RA-4500 provide precise AGL information from 2000 feet down to ground level. RA-4500 ................................................P/N 10-03977 ......... $12,466.00
599
The SAE5-35 altitude encoder from Sandia is small (1 high), lightweight (12 oz.) and utilizes Gillham Grey code in 100 resolution for optimum performance and accuracy. Features two RS232 outputs in 10 foot resolution, simplifying installations. All connectors are on the same side for easy mounting, and digital calibration eliminates analog drift. Altitude In-Flight Monitoring (AIM) mode alerts the pilot when he strays off altitude. Requires virtually no warm up time and uses very little power. Fully TSOd and backed by factory 3 year warranty. Power: 11-33VDC. P/N 11-00665 ......................... $359.00 The SAC 7-35 is FAA TSO Approved as an altitude encoder. It provides standard Gillham Grey code for legacy transponders and RS-232 data for the new generations of transponders. Altitude Alerting. The SAC 7-35 has SANDIA Aerospaces exclusive AIM (Altitude Inflight Monitoring) that alerts the pilot anytime he deviates more than 100 feet from his selected altitude. Fuel Flow. The addition of a fuel flow transducer (two for a twin) and your SAC 7-35 provides all the fuel flow data your navigation systems needs to monitor your fuel situation. Airdata Computer. The SAC 7-35 is a full up TSO'd Airdata Computer offering all of the functions and capabilities of systems costing thousands of dollars more. The SAC 7-35 has multiple interface formats that allow it to provide data to a wide variety of avionics systems. Designed and manufactured to most exacting standards, you can depend on SANDIA Aerospace products to provide years of reliable service. And every product is backed by a three year warranty and personal service support. P/N 11-07938.......................$2,176.00 The SANDIA aerospace SAC 7-35-01 is an airdata computer and data translator that interfaces the Garmin 400W/500W navigators Downlinked Aircraft Parameters in ARINC 429/743 format to the Collins TDR 94D for ADS-B out capabilities. Functions: Altitude Encoder. The SAC 7-35 is FAA TSO Approved as an altitude encoder. It provides standard Gillham Grey code for legacy transponders and RS-232 data for the new generations of transponders. Altitude Alerting. The SAC 7-35 has SANDIA Aerospaces exclusive AIM (Altitude Inflight Monitoring) that alerts the pilot anytime he deviates more than 100 feet from his selected altitude. Fuel Flow. The addition of a fuel flow transducer (two for a twin) and your SAC 7-35 provides all the fuel flow data your navigation systems needs to monitor your fuel situation. Airdata Computer. The SAC 7-35 is a full up TSOd Airdata Computer offering all of the functions and capabilities of systems costing thousands of dollars more. The SAC 7-35 has multiple interface formats that allow it to provide data to a wide variety of avionics systems. P/N 11-09321.......................$3,612.85
The ACK A30.9 (Mod 9) encoder is ideal for use with most GPS and TAWS systems, and works well with most of todays mode S transponders. Feature Gray code in 100ft. increments and RS-232 in 10 or 100 feet increments. Furnished with a 4 ft. harness, pre-wired jack, quick release mounting tray, fittings, static line, and installation manual. Reports altitude to 42,000 ft. One Year Warranty. P/N 11-02375 $239.50
The Ameri-King AK-350 is the most advanced blind altitude reporter on the market, extremely accurate and reliable, the AK-350 is compatible with all transponders, is TSO-C88 approved, and reports altitude to 30,000 ft. Only 3.5x 2x 4.75 and weighs 0.4 lbs. Perfect for pressurized or non-pressurized installations and uses 14V or 28V power. Installation is very simple; all accessories and installation instructions are included. 3 year extended warranty. The AK-35, AK-40 and AK-50 encoders are designed for aircraft flying at altitudes higher than 30,000 ft. Model # Max. Altitude AK-350 30,000 ft. AK-35 35,000 ft. AK-40 40,000 ft. AK-50 50,000 ft. AK-60 62,000 ft. Part No. 11-12010 11-12011 11-12012 11-12013 11-01250 Price $168.95 $520.00 $748.00 $748.00 $1,255.00
Reliable service for over 10 years. * Pin for pin replacement for most other manufacturers encoders. * Comes with Mating Connectors with Cable Clamps, and Mounting Bracket. * Optional: Available with two independent RS232 serial data ports selectable message protocols for most popular avionics interfaces. Programmable for 100 and 10 resolutions. See Part No. 11-06983 * Optional: Available with adapter plates that will allow the installer to mount the unit in another manufacturers mounting tray. Specifications: * Size: 2.5W x 3.42H x 1.38L.* Weight: 5.9 oz. * Will operate on either 14 or 28 VCD at 0.270 Amps. There are two versions of this model: Standard Version SSD120-30N Version SSD120-30N-MOD1 for NARCO AT-5A, 6A, 50, 50A Transponders. The Narco AT-5A, AT-6A, AT-50* or AT-50A transponder will not accept data from the SSD120-(XX)N() Altitude Digitizer. A recent modification to remove the output decoupling capacitors is required and this version includes that modification. 30,000 ft. Range ............................... P/N 11-06489 ................... $267.00 35,000 ft. Range ............................... P/N 11-09608 ................... $335.95 SSD120-30N-MOD1 ......................... P/N 11-09916 ................... $386.95
Reliable service for over 10 years. Pin for pin replacement for most other manufacturers encoders. Optional: Available with adapter plates that will allow the installer to mount the unit in another manufacturers mounting tray. * Will operate on either 14 or 28 VCD at 0.270 Amps. There are two versions of this model: Standard Version SSD120-30N-RS232 Version SSD120-30N-RS232-MOD1 for NARCO AT-5A, 6A, 50, 50A Transponders. The Narco AT-5A, AT-6A, AT-50* or AT-50A transponder will not accept data from the SSD120-(XX)N-RS232 Altitude Digitizer. A recent modification to remove the output decoupling capacitors is required and this version includes that modification. 30,000 ft. Range .............................. P/N 11-06983 ....................$329.00 35,000 ft. Range .............................. P/N 11-09609 ....................$464.95 SSD120-3N-RS232-MOD1.............. P/N 11-09917 ....................$341.95
The Icarus Model 3000U Altitude serializer connects to the existing Mode C encoder in the aircraft. It converts the gray-code into a decimal format and sends it to the GPS receiver using a serial connection. It will function with Trimble,Garmin 150, Northstar, and Apollo GPS receivers. Features: Northstar has tested and approved the 3000U for use with its GPS receivers. Garmin has tested and approved the 3000U for use with its approach approved GPS receivers. Trimble Navigation has tested and approved the Model 3000U for use with its GPS aviation receivers. IIMorrow has tested and approved the Model 3000U for use with all of its GPS aviation receivers. Note: Please advise if transponder is a Narco AT-50 or 50A. or a Wilcox 1014. Specifications: Weight: 5oz. Power requirements: 10 to 30 vdc at 20 ma. (must be fused) Size: 4.2 x 3 x 1 P/N 11-04692 ......................... $256.95 EC2002 will accurately report the aircrafts altitude from -1000 to +35,000ft. The altitude output will be via the 10 line Gillham Gray code. Accuracy has been measured as a 40 foot drift over 35,000 feet. Lowest power requirements of any altitude encoder today. Typical current consumption of 10 90mA, this makes it the logical choice for all battery only operators. Small size and light weight make installation very simple. The chassis is flanged, and is predrilled with mounting holes for easy attachment. The connections consist of the well know DB-15 electrical connector with pin assignments identical to many existing encoders, and a 1/8 NPT fitting which is an industry standard for aircraft equipment. These connections make it compatible with all ATC transponders currently available. P/N 11-05105 .............. $332.95
600
BECKER AVIONICS
The BXP6403-2-(01) is a compact and lightweight single block Mode-S transponder. It is certified according to ETSO-2C112b and is suited for VFR and IFR operations up to 15000 feet. The transponder is equipped with extended squitter and SI code function and it provides an interface to the central aircraft data system. It allows ELS, supports EHS, as well as ADS-B via extended squitter. The Mode S ICAO address and additional fixed data are stored in a separate address module, AM64001-(01), which is plugged on to the transponder and remains in the aircraft when the transponder is exchanged. The BXP6403-2-(01) is designed for slide-in mounting (tray available) and fits into a 160.3 x 41.28 mm cut out. The use of an adapter (available as accessory) allows for retrofit in a KT 76 A tray. Description Part No. Price
Bxp6403-2-(01) - Mode S Transponder with installation kit for retrofit of kt76a - for vfr installation type 175 watt power output, extended squitter Bxp6403-1-(01) - Mode S Transponder with installation kit for retrofit of kt76a - for ifr installation type 250 watt power output, extended squitter Mode S Tansponder with installation kit for new installation. Class 2 for vfr installation type 175 watt power output, extended squitter Mode S Transponder with installation kit for new installation. Class 1 for ifr installation type 250 watt power output, extended squitter
Single block Mode-S transponder. It is certified according to ETSO-2C112a and is suited for VFR and IFR operations up to 15,000 feet. Equipped with extended squitter and SI code function and it provides an interface to the central aircraft data system. It allows ELS, supports EHS, as well as ADS-B via extended squitter. Designed for panel mounting and fits into a 2 inch cut out. BXP6401-2-(01)............................. P/N 11-05326....................$2,595.00 Becker 1K6401 Harness ............... P/N 11-07192.......................$200.00 The CU 5401 - ( ) control unit is designed for installation in the instrument panel of aircraft. The dimensions of the unit correspond to the ARINC standard for instruments. All controls are located on the front panel of the unit. The 15-pole unit connector is mounted on the back of the control unit. CU 5401 Control Unit .................... P/N 11-07858.......................$775.00 ATC 4401 Remote Harness .......... P/N 11-07320.......................$160.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The ATC 4401 has been designed as a part of the Becker Compact Line for all aircraft and helicopters where small dimensions and light weight are essential. It has the same look and similar size as the successful transceiver AR 4201. The mounting behind the panel is as simple as for the AR 4201. The sunlight readable display is illuminated for night operations. Despite the small size, the operation is simple and straight forward. It even allows the one button recall of two preselected codes. In The Box: ATC 4401 175W Mode C Connector Kit (Solder type) Specifications: Weight: 1.59lbs Width: 2.41in Length: 2.41 in Depth (w/0 connector): 7.55in Warranty: 2 years Power Requirement: 14-28 VDC TSO/JTSO C74c, C88a ATC 4401 175W ........................P/N 11-01094 ......................$1,995.00 ATC 4401 250W .........................P/N 11-01095 ......................$2,245.00 ATC 4401 Harness .....................P/N 11-07874 ..........................$160.00 Even smaller and lighter than its forerunner - the legendary AR 3201 - it is ideal for installation in gliders, motor gliders and small aircraft due to its low power requirement and 2 1/4 inch round panel cutout. Features: 118 - 136.975MHz, 25 kHz, 760 Channels, 7W Power Output, 5W Min., Sunlight Readable LCD, Active / Preset Frequencies, Channel Mode, Memory Up to 99 Channels, TSO/JTSO C74c, C88a Specifications: Width: 2.41, Length: 2.41, Depth (w/o connector): 7.55, Weight: 1.47lbs, Warranty: 2 years Power Requirement: 14 VDC ......................P/N 11-01566 ..... $1,395.00 AR 4201 COM Harness ..............................P/N 11-07086 ........ $178.95 Outside Air Temp Sender............................P/N 11-02190 ........ $117.95 Smaller and lighter than its legendary forerunner AR 4201 due to implementation of state-ofart DSP (Digital Signal Processing) technology. It is mountable in the 2 1/4 inch standard instrument panel recess, equipped with a highly efficient AM-transmitter, offering easy switching between the 8,33 and the 25 kHz mode. A built-in-test facility increases flight safety. The dual monitor mode allows scanning of two different channels. Specifications: Frequency from 118.000 MHz to 136.990 MHz 8,33 or 25 kHz channel spacing RF-Output Power: > 6 W Supply voltage 9 to 36 V DC P/N 11-08550 ..... $1,838.00
The CU 5209 control unit is used to operate and control the RT 3209 or CM 4201 VHF-Transceiver. Both enable voice communications on 760 channels in the 118.000 MHz to 136.975 MHz frquency range with a channel spacing of 25 kHz. The mechanical construction of the control unit is such that it can be installed without limitation in aircraft. There is no restriction with regard to installation in the instrument panel or installation by rigid attachment to the fuselage in any aircraft, including rotary wing aircraft, in the verified environmental categories. Specifications: Fits into a standard 2-1/4 (57mm) round instrument cut out, Depth: 2-1/2, Weight: .57 lbs, 14 to 28 VDC, Power Required Note: The CU 5209 can only work with the CM 4201 or RT 32309 remote com. CU 5209 Control Unit .................... P/N 11-07857.......................$725.00 RS232 to RS422 Adapter - Essential for proper communication with the CM 4201 and the control unit, CU 5209. P/N 11-07964................$71.50 Control Unit for the BXP 6402 series transponders. Together with the Mode-S transponder BXP 6402, the control unit CU 6401 forms the aircraft part of the air traffic control system. CU 6401-1 .............. P/N 11-07859.......................$918.00
REMOTE COM / TRANSPONDER COMBO PACKAGES MODE C COMBO 175 - Includes: CU 5209 Remote Com Head, CM
4201 Remote Com, CU 6401 Remote Transponder Head, 6402 250W Remote Transponder, Solder Connector Kits for All Units Note: Package ...............P/N 11-03513 .......... $4,895.00 MODE C COMBO-250 - Includes: CU 5209 Remote Com Head, CM 4201 Remote Com, CU 5209 Remote Transponder Head, ATC 4401 250W Remote Transponder, Solder Connector Kits for All Units Package ...............P/N 11-07848 .......... $5,195.00 MODE S 150 COMBO - Includes: CU 5209 Remote Com Head, CM 4201 Remote Com, CU 6401 Remote Transponder Head, 6402 150W Remote Transponder, Solder Connector Kits for All Units. Package ...............P/N 11-07849 .......... $5,595.00 MODE S 250 COMBO - Includes: CU 5209 Remote Com Head, CM 4201 Remote Com, CU 6401 Remote Transponder Head, 6402 250W Remote Transponder, Solder Connector Kits for All Units .... Package ...............P/N 11-07851 .......... $6,395.00 Must order 11-07875 remote bracket with these packages. Bracket.................P/N 11-07875 ............. $150.00 The BXP 6402-2R-(01) remote controlled Mode-S transponder forms, together with the corresponding control unit, the airborne component of the Air Traffic Control (ATC). It functions in accordance with the secondary radar principle and allows air traffic control to locate, identify and track aircraft. BXP 6402-2 150W Remote .................... P/N 11-07860...........$2,630.00 BXP 6402-1 250W Remote .................... P/N 11-07861...........$3,285.00 BXP 6402 Remote Harness ................... P/N 11-07195..............$295.00
COM / TRANSPONDER COMBO PACKAGES MODE C COMBO 175 - Includes: Becker AR 4201 Com and the ATC
4401-1 175W transponder P/N 11-01096 ........$3,415.50 MODE C COMBO-250 - Includes: AR 4201 Com, ATC 4401 175W Transponder, Solder Connector Kits P/N 11-07853 ........$3,585.00 MODE S 150 COMBO - Includes: AR 4201 Com, BXP 6401 150W Transponder, and Solder Connector Kits for Both Units P/N 11-07854 ........$3,825.00 MODE S 250 COMBO - Package consists of AR 4201 Com, BXP 6401 250W Transponder, Solder Connector Kits for Both Units P/N 11-07856 ........$4,525.00
The ATC 4401-2 remote controlled transponder forms, to gether with a corresponding control unit, the airborne component of the Air Traffic Control Radar Beacon System ATCRBS. It functions in accordance with these secondary radar principle and allows the respective ground stations to locate, identify and track aircraft. ATC 4401-2 175W Remote .................... P/N 11-07846...........$2,195.00 ATC 4401-2 275W Remote .................... P/N 11-07847...........$2,432.00
601
Enables pilots and installation engineers to customize the VHF communication radios in any aircraft. Ideally suited for installations where minimum panel space is to be used. It utilizes a small, lightweight CU 5209 control unit, which fits into a standard 2 1/4 (57 mm) round instrument panel cutout, and is only 2 1/2 deep. The lightweight remote transceiver unit, AR 3209 (11) is mated with this control head, to complete the system. It can be installed at any convenient place in the aircraft. Both, active and preset frequencies are displayed. Up to 20 preset frequencies can be easily entered in channel mode from the front panel, and stored in non volatile memory. Note: Will only work with the CU5209 Control Unit RT 3209 Remote COM Unit ................... P/N 11-07844...........$3,095.00 RT 3209 Remote harness ...................... P/N 11-07196..............$180.00 CU 5209 Control Unit ............................. P/N 11-07857..............$725.00
Designed and manufactured in Australia, the Micro Air 760 VHF transceiver is ideal for aircraft requiring compact size and low power consumption. It has many of the features not found in radios costing much more and includes features not available in any other units. Its compatible with a variety of speaker & microphone combinations including all general aviation microphones. Standard model mounts in a standard 2-1/4 panel hole and weighs only 19.4 oz. It has been proven in high noise environments such as Rotax 2-stroke engines and is excellent for gliders, Ultralights, a general aviation aircraft. A unique LED multifunction annunciator located at the top right of the unit provides several alerts, and an external memory toggle switch allows remote control of the memory frequencies. Transmit output: 4W, Size: 2.56 x 2.44 x 7.779d, 14V. Standard 2-1/4 model ..................... P/N 11-18700....... $1,044.00 760 Harness rev Q .................................... P/N 11-06306.......... $283.95 M760 Twin Gold Harness.......................... P/N 11-07113.......... $233.95 Boom Mic BM470-E .................................. P/N 11-02864.......... $125.95 Boom Mic BM470-D .................................. P/N 11-08148.......... $125.95 Spaker Box SP01 ...................................... P/N 11-02865............ $43.00 The Microair Avionics T2000SFL Transponder is a mode 3A/C aircraft transponder designed to operate in an ATCRBS environment. The T2000SFL has been designed to meet RTCA/DO-144 requirements, and has been tested to DO-160D for environmental and EMC requirements. The T2000SFL software has been developed and approved under RTCA/DO 178B requirements. The T2000SFL is a small lightweight transponder with low power requirements. The T2000SFL is compatible with any C88a compliant altitude encoder, and offers the following features: * Mode 3 A response (4096 codes) * Mode C altitude response * SPI indent response * Encoder Altitude displayed * Altitude Alert (HI / LO) * Voltage alter (OV / UV) * Security coding of serial number * Option to power encoder only in mode C operation. T2000 Transponder ................................... P/N 11-00990....... $2,458.00 EC2002 Altitude Encoder .......................... P/N 11-05105.......... $332.95 Harness T2000SFL Dynon ........................ P/N 13-08295.......... $199.00 Harness T2000SFL Enigma ...................... P/N 13-08296.......... $193.95 Ameri-King Encoder AK-350 30K.............. P/N 11-12010.......... $168.95 T2000 Harness AK-350 ............................. P/N 11-01361.......... $196.95 T2000 Coaxial Cable Kit 3.2M .................. P/N 11-02862............ $45.25
This transceiver is ideal for aviation professionals, who need the ultimate in performance and reliability. Because of efficient design and rugged construction, the AR 3209 transceiver is particularly well suited to demanding military operational environments. 760 channels may be tuned in the frequency range of 118.0 to 136.975 MHz, and 20 preset channels can be stored for immediate recall. It has an output of 10 W, with a power supply of 28 VDC. The complete system is housed in a single compact unit, which mounts in standard 5 3/4 DZUS rails. It does not require the remote boxes, interconnecting cables, or forced air cooling of older generation equipment. AR 3209-11 Tranceiver .......................... P/N 11-08131...........$4,495.00
MICROAIR COMBO KITS TRANSPONDER KIT TSO - Includes: T2000 Transponder, Ameri-King
AK-350 Encoder, T2000 Wire Harness, Transponder Antenna, & Coax Kit Package ...............P/N 11-02866 .......... $2,887.00 TRANSPONDER KIT NON TSO - Includes: T2000 Transponder, EC2002 Encoder, T2000 Wire Harness, Transponder Antenna, & Coax Kit Package ...............P/N 11-05811 .......... $2,439.00 WORKS COMBO KIT- Includes: T2000 Transponder, EC2002 Encoder, Transponder Antenna, M760 Tranceiver, 4 place Voz Intercom, 2 wiring Harnesses, & Coax Kit Package ...............P/N 11-02867 .......... $3,568.00 A special version of the T2000 Transponder, designed for operation in unmanned aircraft. This product is NOT TSO'd due to the OEM nature of the management software. It can help you to open ATC controlled airspace for your product, by making the UAV visible to ATC controllers. The UAV operator will be able to enter an ID code given by ATC, into the T2000UAV-L, to make the UAV uniquely identifiable. Transponder capability will make your UAV visible to TCAS operators, which affords great safety for commercial aircraft operators. The transponder will reply to all mode A and mode C interrogations, and will accept barometric altitude Gray scale (Gillham Code) data. It was designed for very low power consumption, which permits prolonged operation on battery. Can however still pulse out a 200W signal. Light at only 454g (16oz), and easy to istall. Available with either a standard BNC connector or standard TNC connector loaded on the rear face of the chassis. T2000UAV-L TNC Connector ................ P/N 11-07934............$3,395.00 T2000UAV-L BNC Connector................ P/N 11-07935............$3,105.00 A flexible gooseneck microphone. Mounting consists of a steel plate, with right angle flange for attachment of the flexible boom. Boom is fabricated from flexible aluminium conduit, with a conical aluminium housing at the tip to accommodate the microphone capsule. Offers superior noise cancellation and is terminated with a single core shielded 24awg wire. Approx 3m of free wire is provided for connection to the radio. Length: 470cm (18.5). Cable Length: 3m (9 8). Weight: 480g (17oz). Microphone type: Omni directional with effective range 25-100mm (1-4). Current Drain: 5-10mA Impedance: (600 ohm). Sensitivity: -80dB. Frequency Response: 60Hz to 12Hz MIC-45 ................................................... P/N 11-08148...............$125.95
With its new set of features the Becker GK 415 provides excellent durability and reliability in demanding operating environments, capable of being hand-carried in its durable bag, installed in any vehicle or fixed as a low base station. Specifications: Supply Voltage: External 10.0 32.0 VDC via charging device for 115/230 V, AC internal 12 V, 2.2 Ah Dry-lead-acid battery Power Consumption: Receive Current: 70 mA Transmit Current: 2.5 A Frequency Range: 118.000 136.975 MHz Frequency Channels: 760 Channel Spacing: 25 kHz Memories: 99 Storage Height: 3.15 Width: 6.29 Depth: 10.63 Weight: 6.61lbs Warranty: 2 years Com is TSO/ JTSO C74c, C88a GK 415 5W VHF/AM Mobile Tranceiver ........ P/N 11-01097 ....$2,650.00 GK 415 10W VHF/AM Mobile Tranceiver ...... P/N 11-07845 ....$2,650.00
Simply install the appropriate Approach hub for your instrument panel (basic, VFR or IFR), select the appropriate Approach cables for your avionics, and plug it in and your done. Upgrading and replacing avionics only requires a new Approach cable and future maintainability is greatly enhanced eliminating most hand writing and troubleshooting. All cabling is Milspec Tefzel and complies with FAA AC43-13B. STEP 1: Select the appropriate Approach Hub for your instrument panel configuration. Basic instrument panel configuration ............... P/N 11-01457 .. $199.95 VFR instrument panel configurations .............. P/N 11-01458 .. $372.95 IFR instrument panel configurations ................. P/N 11-01459 .. $575.00 Pro G Hub for Garmin Stacks ........................... P/N 11-01893 .. $489.95 STEP 2: choose the Approach cables for your specific avionics. SEE A COMPLETE LISTING OF APPROACH CABLES AT www.aircraftspruce.com
602
4-place mono intercom and now sports the same style tray and chassis the PMA8000B uses. The new sleek bezel is populated with tactile Elastomeric pushbuttons We have also changed from the two 44-pin Molex connectors to a single 44-pin sub-D connector, making the harness a lot easier to build. \PMA6000BAudio Panel ................................. P/N 11-08074 .... $995.00
Call For Special Prices!
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
An integrated Intercom and CD player designed specifically for aircraft installations. Incorporates PS Engineerings exclusive IntelliVox, automating the digitally controlled intercom squelch. Has music and intercom volume controls. 5 back-lit CD push button controls with LED mode annunciation In ISO mode, the pilot hears only aircraft radio traffic, without music or intercom interruptions. In crew mode, the pilot and copilot hear the internal CD player and radio traffic. Automatic fail-safe feature (EMG) connects the pilot directly to the aircraft radios if power is removed from the unit. Both the pilot and copilot have transmit capability over the aircraft radios. In ALL mode, all intercom positions hear the aircraft radios and the CD Player, with PS Engineerings proprietary SoftMute circuit. Can now be ordered with the MP3 player option. Installation is the same, and the units look identical, the units that can play MP3 discs. PCD 7100-P Hi-Fi Stereo Std. Rack width CD Player P/N 11-00541 ........ $799.00 PCD 7100 - 6-Pl Stereo IntelliVox w/MP3...P/N 11-01851 ..... $1,099.99 An inflight entertainment system specifically designed for general aviation airplanes. Can play CDs & MP3 recordings, and contains an AM/FM receiver. Not an adaptation of automotive technology. Meets all of the FAA TSO standards to ensure no interference with other avionics, fits in the normal radio stack and plays through any standard aircraft audio control. Approved for installation under an STC. Has soft mute feature that lowers volume from the entertainment system for the pilots when a comm signal is received. Passengers hear uninterrupted entertainment. The AM/FM receiver is designed & certified to not interfere with the VOR/LOC frequencies, not an easy task for FM, and has special logic that helps it discriminate between broadcast signals on the same frequency. At altitude, AM/FM radio receives competing broadcast signals because frequencies are assigned based on the receiver being on the ground. Identifies the strongest signal and rejects any others on the same frequency, so you hear only one radio station at a time. No external antenna required. A thin strip antenna can be mounted inside any cabin window, where it is out of the way while still providing excellent AM/FM reception. P/N 11-01767 ......$1,695.00
Lends itself nicely for upgrading an existing Bendix/King KMA 24 audio panel. KMA 24 pin compatible. None of the existing wires going to the KMA 24 have to be disturb, thus reducing the amount of installation. Renown 6-place IntelliVox automatic Voice Operated Relay (VOX) intercom system, adjusting a squelch circuit is a thing of the past. Provides 3-com capability with the option to easily convert Com 3 to a full duplex cellular telephone interface. Also has the pioneered Split Mode. Allows the pilot to be on Com 1 while the copilot is on Com 2. Also expandable to accommodate up to 12 places (10 passengers) with the addition of the 11606 IntelliPax. Has four un-switched and un-muted inputs. * Height: 1.3 inches * Width: 6.25 inches * Depth: 6.8 inches * Weight: 1.5 inches * Power Requirements: 12 to 24 VDC * Warranty: 2 Years * Unit is TSOD. PMA 7000H was designed specifically for helicopter and other applications where large seat count and high end-low cost capabilities are required. Adds 3 more passenger positions (total of 7 with Pilot and Copilot seats), Cockpit Voice Recorder (CVR) output, and Push-To-Talk Intercom (PTT-ICS) function. (better known as Hot-Mic) * Height: 1.3 inches * Width: 6.25 inches * Depth: 6.8 inches * Weight: 1.5 pounds * Power: 12 to 24 VDC * Warranty: 3 years * Unit is TSOD PMA7000B Audio Panel ................................. P/N 11-01635 . $1,395.00 6 Place expansion for 7000............................ P/N 11-02544 .... $399.95 7000CD Audio Panel with CD and MP3 ........ P/N 11-01850 . $2,099.00 7000H Audio Panel ........................................ P/N 11-07001 . $2,099.00
Designed specifically for the experimental and LSA owners. Without the traditional functions such as Marker Beacon Receiver, Speaker Amplifier, as well as avoiding the costs of certification, the PMA5000EX provides an unprecedented level of price/performance for the homebuilt.Capabilities: IntelliVox automatic VOX system with selectable "Extreme Noise Capability" Cellular telephone input with "DuTel" distribution Monitor Mode allows automatic muting of non-primary radio Front panel utility jack for phone Split mode for dual audio panel capability 2 - Differential, hi-fidelity stereo music source inputs 3 - Isolation modes 4 - music mute modes 5 - unswitched inputs Dedicated front panel music volume control Selectable music distribution for passengers 2 - Front panel switched inputs 60 second auto-mute mode RAM (Radio Master Mute) 1-year Pro-Support Warranty. P/N 11-08289 ......$895.00 MB 10-is a 3-light 75 MHz Marker Beacon receiver and indicator. This provides the necessary Marker Beacon lights and audio indications necessary for an Instrument Landing System (ILS) approach. A switch labeled Hi/Lo/TST allows the pilot select high or low sensitivity as well as test and mute modes. * Height: .95 inches * Width: 2.80 inches * Depth: 4.85 inches * Warranty: 1 year * Unit is TSOD Standard .........................P/N 11-05621 .............. $595.00 Remote Mount ................P/N 11-10014 .............. $595.00
On all PS Engineering audio panels, a wiring harness must be done by PS Engineering or a PS Engineering dealer or the warranty is void.
Designed from the outset as an upgrade/replacement for the popular KMA24 71. Many of the enhancements include; a powerful headset audio amplifier, and high-performance IntelliVox intercom, dual audio capability in a single box, full duplex mode for wireless operations, and expansion capability with stereo IFE input. Can accommodate 5 transceivers. A monaural system, the PAC24 can include a music input. SoftMute silences music during radio traffic, but allows music other times. Incorporates a split mode that will allow a single audio panel to separate two pilots on different transceivers. When combined with IntelliPax expansion system, the dual PAC24 can be a 14-place system. The audio amplifier is capable of providing 120 milliwatts (mW) into general aviation headphones. Horizontal Mounting. P/N 11-01293 ..............$1,995.00 Vertical Mounting..........P/N 11-05507 ..............$1,995.00 PS ENGINEERING ACCESSORIES PS Engineering cellphone cable. ........P/N 11-04376 ...................$28.95 PS Engineering music cable ...............P/N 11-04377 ...................$28.95 Digital Recorder Aural Warning System w/ 4 unswitched inputs P/N 11-05158 .................$499.95 FM Radio Adapter (allows interfacing of non-standard aviation radios) P/N 11-05159 .................$349.95 4 Channel Summing Amplifier.............P/N 11-05160 .................$195.00
Engineered for 10,000 hrs. of performance, (minimum), these flame retardant speakers sound clearer and last longer. The magnet assemblies are heavier than original equipment, yet the overall speaker depth is only 2. The voice coils are heat-proof to withstand high power levels & the gaskets are treated with a moisture barrier, for unprecedented reliability. P.C. = Pin cushion.
Mag. Prog. Imp. Wt. Power Depth Price (ohms) (oz.) Watts) 11-04649 6 x 4 x 1.878 P.C. Oval 4.8C 3.2 10 1.550 $31.65 11-04646 6 x 4 Round 4.8C 3.2 10 2.018 $27.85 Part No. Size in inches & Description
603
Turning back to a more traditional design ,the COM 2000 features dual concentric knob controls, displayed active and standby frequency with push button flipflop, 15 memory locations with user defined alphanumeric channel identifiers and a manual squelch control. Its 3/8 character display is easy to read from any angle and in any lighting condition. This mighty little radios all metal construction is designed to serve all your communication needs well into the future. Large 3/8 display character 8 watt transmitter 1 inch high and 9 inches long Dual concentric knob controls 15 memory locations with user-defined alphanumeric channel identifiers Non-volatile memory Manual squelch control All machined aluminum construction RS232 interface Photocell dimming. P/N 11-10569 .............. $995.00
This unit is a step down voltage converter that drops 28 volts DC down to 13.8 volts DC. This unit would be required to operate either our COM 760 TSO or INS 422 TSO units in an aircraft or vehicle that are 28 volts DC. Specifications: Physical Dimensions: L 4.0 (10.16 cm) x W 4.625 (11.75cm) x H 1.250 (3.18cm) Weight: 0.75 lbs Power Requirements: Current 2.0A Continuous with 5.0A Intermittent P/N 11-02963 .... $152.95
COM 2000 continues the tradition of hard working, affordable avionics by Val Avionics. The smallest panel mounted COM radio available today. Features dual concentric knob controls, displayed active and standby frequency with push button flip-flop and a manual squelch control. Its 3/8 character display is easy to read from any angle and in any lighting condition. All metal construction. 0 P/N 11-06411 ......................$996.00
The INS 429 is a high quality, multifunction, fully integrated navigational instrument displaying VOR, LOC, Glide Scope, Marker Beacon, and GPS/NAV inputs. Not only does it sport its own internal receivers, it will also display course deviation information from an external NAV or GPS source. A perfect solution for a crowded panel. Not TSOD (for experimental aircraft only). P/N 11-05592.......................$1,890.00
604
Remote mounted multi-regional DVD drive which allows you to view DVDs from any region around the world. The unit also is a CD/MP3 player. Requires PCU (Passenger Control Unit) for operation. PN 11-04495 Specifications: * Operating Voltage: 11-33 VDC * Current Draw: 0.2 Amps * Antenna: Externally mounted (included) * Weight: 1.2 lbs. * Dimensions: 6.25(L)x5(W)x1.25(H) P/N 11-04496 ......... $4,443.00
AI DVD/CD PLAYER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Passenger Control Unit with IR remote. Controls remote-mounted I.C.E. components. Sirius Satellite Radio. DVD/CD, or MP3 player. Two distinct channels allow some passengers to receive one source while others receive a second source. Specifications: * Operating Voltage: 11-33 VDC * Current Draw: 0.2 Amps * Weight: 0.75 lbs. * Dimensions: 125(L)x5.5(W)x2.00(H) P/N 11-04495 ........... $1,350.00
10", 12",15" TFT active-matrix LC flat-panel display. Panel mount only. FAA/PMA Approved Extra-Wide Viewing Angle High-Intensity Backlight Drawn-Aluminum Enclosure Rounded Safety Corners Seek Up/Down Tuning NTSC Input Signal 1500 NIT 28 Volts DC Description Part Number Price AI 10" Flat Panel Display 11-07255 $3,995.00 AI 10" Flat Panel Display Flip Down Display 11-07258 $5,195.50 AI 12" Flat Panel Display 11-07256 $4,695.50 AI 15" Flat Panel Display 11-04509 $5,415.00
AI 7 WIDE SCREEN
7 wide-screen format with optional touch screen Specifications: * Input Signals: 1 VGA and 2 NTSC * Resolution: 800 x 600 * Viewing Angles: (right/left/above/below)65/65/40/65 * Brightness: 1500 NIT * Operating Voltage: 18-33 VDC @ 750 mA * Weight: 2.5 lbs. * Dimensions: 5(H) x7(W)x1.5(D) * Mounting: Bulkhead, headrest, or articulating arm
Standard ...................P/N 11-04499 .... $1,669.00 With Arm ...................P/N 11-04502 .... $1,850.00
The AI-DVD AM/FM Stereo & Disc Changer System allows you to view DVD movies or listen to your favorite CDs or radio station. Features: DVD audio, DVD video video CD & music playback Anti-shock memory Floating mechanism Front & rear program capability 5V high voltage preamp outputs 18 FM and 6 AM presets Full function remote control Auxiliary input AI-DVD / 8 Disc Changer ............................P/N 11-01173 .... $4,385.00 The AI-Amplifier is the perfect companion to all our entertainment products. Enjoy your favorite music without the extra weight and confinement of headphones. Specifications: * FAA/PMA Approved * 20 Watts Per Channel Maximum * Low Distortion * 28 Volt * 2 Channel Output * 5.75 X 5 X 2 Inches * Weighs 1.5 Pounds. 28V P/N 11-19504 ..................... $1,084.00
Remote mounted Sirius Satellite Radio module with antenna. 120 streams of coast-to-coast digital quality sound including NFL and NASCAR (available 2007). Specifications: * Operating Voltage: 11-33 VDC * Current Draw: 0.2 Amps * Antenna: Externally Mounted (included) * Weight: 1.2 lbs. * Dimensions: 6.25(L)x5(W)x1.25(H) P/N 11-04497 ........... $2,495.00
AI - AMPLIFIER
Remote mounted video amp with 2 video inputs & 6 video outputs. 6 individual 12 VDC power supplies at 0.75 amps each. Specifications: Operating voltage: 18-33 VDC Current Draw: 2.5 Amps Wt: 1.0 lbs. Dims: 6.25(L)x2(W)x1.75(H) P/N 11-04498 ............ $1,410.00
AI VIDEO AMP
605
The Monroy ATD-300 provides that continuous traffic awareness in a compact size. Detects all transponder type replies from nearby traffic and displays their proximity and their altitude on a bright 8-character dot matrix display. Simultaneously, a clear female voice provides voice alerts in relation to traffic proximity. It even has a test mode to verify onboard transponder opeation. All of this and more in the size of an alumminum box (2.75w x 0.75h x 5d) no bigger than your intercom. With the Plug N Fly feature you jut plug the ATD-300 into the cigarette lighter (for power) and the aircraft headphone jack (for voice feedback) and you are ready to fly. No panel space or installation is required. Velcro and mounting brackets are provided for location on top or bottom of the instrument panel and in the panel. The unit comes with a detachable antenna, cigarette lighter power cord, and headphone cable for Plug N Fly setup. The ATD-300 Traffic-Watch provides multiple capabilities that enhance the safety of flight, such as: Traffic Range up to 5nm High/Low Voltage alarm Traffic MSL Altitude Auto Mode Display Voltage Indication ATD-200 Interchangeable Traffic relative altitude readout Host transponder altitude/code readout Bright LED 8 character dot matrix display Specifications: Weight: 10 oz.; Frequency: 1090 MHz; Max Range: 5nm. ................... P/N 11-02449.......... $549.00 ANT-300 Antenna 5x3x1 single BNC .... P/N 11-08481.......... $464.00
RK2010 Kit -18 dual stack,flange,FAA-PMA,STCd 11-02608 $467.40 RK2015 Kit - 18 dual stack, flanged outer,FAA11-02609 $467.40 PMA,STCd RK2020 Kit -18 dual stack, reduced outer,FAA11-02610 $467.40 PMA,STCd RK2025 Kit -18 dual stack, reduced outer,FAA11-02611 $467.40 PMA,STCd RK3010 Kit - 18.0 triple stack, flanged outer + Full 11-02612 $565.25 Dim. Center Rail Tray Mount Kit - FAA-PMA, STCd RK3015 Kit - 18.0 triple stack, flanged outer+reduced 11-02613 $565.25 dim. Center Rail Tray Mount Kit - FAA-PMA, STCd RK3020 Kit - 18.0 triple stack, flanged outer + Full 11-02614 $565.25 Dim. Center Rail Tray Mount Kit - FAA-PMA, STCd RK3025 Kit -18.0 triple stack, reduced outer+reduced 11-02615 $565.25 dim. Center Rail Tray Mount Kit - FAA-PMA, STCd RK4000-12 Kit - Standard Closeout Panel - Chem 11-02616 $166.25 Film - 12 Kit - FAA-PMA, STCd RK4000 - 12A Kit - Standard Closeout Panel - Black 11-02617 $185.25 Anodized - 12 Kit - FAA-PMA, STCd
PCAS XRX-ONYX is the first ever portable, passive, stand-alone collision avoidance system for general aviation to offer direction from within the cockpit. PCAS, or Portable Collision Avoidance System, is Zaons solution for providing high-quality, low cost traffic information to the general aviation pilot. XRX-ONYX is our flagship model, providing a complete picture in a simple, easy-to-use device. PCAS represents our third generation of proven traffic detection technology. XRX-ONYX is truly a Plug and Go device with its built-in antenna system and built-in display. XRX-ONYX ONYX UPGRADED SYSTEM - The new XRX-ONYX, is an upgraded version of the current XRX--A system. The differences include: * The code for the new product is XRX-O-A * Improved housing in a new black color (Tough-as-nails polycarbonate housing is semi-transparent and attractive) * Software Version 2.1 contains: Minor user interface enhancements, Forward compatibility with integrated systems. An industry first, XRX-ONYX detects threat aircraft direction from within your cockpit using a cutting-edge, proprietary, self-contained antenna design. With direction, locating and identifying traffic is simple and easy, and traffic information is three-dimensional, which means it can be displayed on third-party systems, such as moving map GPS devices. Read more about this below. P/N 11-06504 ....... $1,395.00 XRX BARE WIRE POWER/DATA CABLE - Get XRX Traffic hard wired into your third-party moving map system. Provides hook-up for both the data port (DB9) and the power jack on the XRX. The other end of the 68 cable has tined leads ready for hook-up directly to your third party system. Uses a single lightweight cable for both power and data transmission. P/N 11-06243 ............ $29.75 The worlds smallest collision avoidance device. MRX displays range and relative altitude of the closest threat, with continuous monitoring of the top 10 threats within the 5 NM scalable detection window. Altitude detection is scalable up to +/- 5000 ft. At 2.5 (65mm) W x 4.2 (107mm) D x 0.6 (17mm) H, MRX is smaller than adeck of cards. MRX uses an easy menu-driven interface and audio annunciations for traffic advisories and alerts. The unit boasts a built in solid-state altimeter for always relative altitude information, and built-in temperature compensators and overtemp protection. Information is displayed on the high-brightness LED display (dimmable). MRX also monitors aircraft bus voltage and host transponder output. The unit is powered by aircraft power (12-40 VDC adapter included) or 2 AA Batteries (with 8+ hours of use). MRX is half the size, 1/3 less price, portable and offers better accuracy and many more features than the ATD-300. P/N 11-05223............ $499.00
Zaon Accessories Zaon MRX Antenna Extender Zaon International Converter Zaon Home and Auto Charger Zaon Bose Headset Audio Adapter Zaon Helicopter U174 Audio Adapter Zaon Xrx - Garmin 396/496 Interface Cable Zaon XPD-X Wire / Power / Data Cable Zaon Battery Pack Z60-W Zaon Medium Battery Z60-W Zaon MRX installation Hardware Kit Zaon Xrx - Garmin 695/696 Interface Cable Zaon 396 496 XRX Traffic Cable Zaon to AVMAP EKP-IV Cable Zaon to AV8OR Cable Zaon Bluetooth Module Zaon aera Series Traffic Cable Zaon XRX Ram Suction Cup Mount Part no. 11-04518 11-04522 11-04524 11-04525 11-04526 11-05267 11-06243 11-07027 11-07046 11-07043 11-07107 11-05267 11-07714 11-06944 11-08025 11-08307 11-08024 Price $39.90 $24.75 $20.75 $95.00 $59.95 $84.50 $29.75 $184.95 $178.00 $37.85 $82.50 $84.50 $32.95 $41.25 $199.00 $134.95 $44.50
The R5 is a passive collision avoidance system. It detects transponder replies of aircraft flying in your vicinity and displays simultaneously both squawk code, altitude, vertical trend and estimated distance of the 3 closest threats. The R5 will increase your ability to visually locate threat aircraft and better apply the FAA See and Avoid concept. The R5 has been designed to be very robust against interference coming from DME equipment and other sources of disturbance. Offers significant operational improvements over previous generation products at a very attractive price. The R5 comes with a 3 year manufacturer warranty. P/N 11-02782 ......$779.00
This custom audio cable is 100% compatible with all Bose 6-pin connector headsets, including noise reduction circuitry, and is stereo compatible. One simple cable is all you need! Replaces standard headset audio cable. 6-foot straight cable into Y. P/N 11-04525 ...........$95.00
606
CM WP ME
Building and ordering your RAM Mount is easy. All you need to know is what you need to mount and choose where you would like to mount it, we take care of the rest. Building a RAM Mount solution usually consists of 4 parts, base, arm, adaptor and cradle/holder. Use the example image to the right for reference.
3. 1. = 2. 4.
HA AP
STEP 1: BASES
Model No. Description Part No. Prices RAM-B-224-1U RAM 3.3 Dia Suction Cup w/Ball 11-06449 $13.98 RAP-B-121BU RAM Universal Yoke Clamp w/Ball 11-05866 $15.90 RAM-B-202U RAM Round Base w/Ball 11-07069 $6.53
RAM-B-231ZU RAM Rail Base w/ball & Zinc Ubolt. 3/4 - 1-1/4 dia. rails. 11-03460 $12.33
RAM-B-108B- RAM V-Base Rail Yoke Clamp STRAP40U for Breechcraft and Bonanza RAM-B-259U RAM 1 Ball Glareshield Base
STEP 4: CRADLE/HOLDER
Model No. RAM-HOL-AP9U RAM-HOL-AP10U RAM-HOL-AP8U RAM-HOL-AP8LU
RAM-B-224-1U RAM-B-108B RAP-B-121BU RAM-B-202U Suction Cup -STRAP40U Yoke Clamp Flat Surface V-Base Base
Description RAM Holder for Apple iPhone 4G RAM Holder for Apple i-Pod Touch 4th Gen RAM Holder Apple iPad & IPad 2 RAM Locking Holder Apple iPad & iPad 2 - cradle with dial combination lock RAM Holder Apple iPod Touch 2nd & 3rd Generation RAM Holder Apple iPhone 3G/s RAM Holder for Apple i-Pod Touch 1st Gen RAM Holder for Apple i-Pod Nano Touch & Nano 3rd Gen. RAM Holder for Apple iPhone 1st Gen. RAM Holder for Apple i-Pod Nano 1st & 2nd Gen. RAM Universal Tablet Holder, Picture on next page RAM Universal Tablet Holder, Picture on next page RAM Universal Tablet Holder, Picture on next page RAM Universal Tablet Holder, Picture on next page RAM Holder Garmin GPSMAP 695/696 RAM Holder Garmin Nuvi 200W & 250W, 2xxW & 2xxWT RAM Holder Garmin Oregon RAM Holder Garmin E-Trex RAM Holder Garmin GPSMAP 176, 196, 276, 376, & 496. RAM Holder Garmin 76C Series RAM Holder Garmin Nuvi 880 850 860 RAM Holder Garmin Nuvi 3750, 3760T & 3790T RAM Holder Garmin GPSMAP 62, 62S, &62ST RAM Holder Spot Satellite Unit RAM Holder Spot 2 Satellite Unit RAM Holder for Electronics with Belt Clip RAM Universal PDA Holder RAM Universal Plastic Radio/ GPS Holder RAM Holder Multi-Pad (Note Pad holder) Ram Spring Loaded Cradle For Iphone And Ipod Touch
LG EP CS IN EL AV TO PS BV
Adapter Part No. Diamond 11-09454 Diamond 11-09764 Round Round 11-08577 11-08578
STEP 2: ARMS
RAM-B-201U-A 2-7/16 LONG RAM-B-201U 3-11/16 LONG Model No. RAM-B-201U-A RAM-B-201U RAM-B-201U-C Description RAM Double Socket Short Arm RAM Double Socket Med. Arm RAM Double Socket Long Arm RAM-B-201U-C 6 LONG Part No. Prices 11-03458 $9.80 11-01255 $12.47 11-09323 $18.72
Diamond 11-08583 Diamond 11-08582 Diamond 11-06432 Diamond 11-06433 Diamond 11-06431 Diamond 11-06430 Diamond 11-09766 Diamond 11-09767 Diamond 11-09768 Diamond 11-09887 Round 11-08576
STEP 3: ADAPTER
RAM-B-202U ROUND ADAPTER
Diamond 11-06471 Diamond 11-08585 Diamond 11-01923 Diamond 11-01925 Diamond 11-06477 Diamond 11-06475 Diamond 11-09769 Diamond 11-09770 Diamond 11-07508 Diamond 11-08581 Diamond 11-01917 Diamond 11-05488 Diamond 11-06450 Diamond 11-08579 Diamond 11-10087
Multi-Pad on Yoke
607
CM WP ME HA AP LG EP
1.
RAM-HOL-TAB2U Universal Tablet Hldr Tablets in thin cases NOOKcolor BlackBerry PlayBook Dell Streak Samsung Galaxy
RAM-HOL-TAB4U Universal Tablet Hldr Tablets in thin cases + Rugged Case Samsung Galaxy NOOKcolor BlackBerry PlayBook Dell Streak RAM-HOL-TAB5U Universal Tablet Hldr Tablets w/no cases Samsung Galaxy Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak
RAM-HOL-TAB3U Universal Tablet Hldr Tablets in covers/cases Apple iPad Apple iPad 2 HP Slate HP TouchPad Lenovo LePad
SPECIALTY MOUNTS
Order your complete mounting solution by choosing your mount and then cradle. You can reference the 2 step process below.
Fast, simple, and cost effective are all things that describe the EZ-Strap and Little Buddy Mounts. Great for small devices like smart phones and PNDs. Simply choose your favorite EZ-Strap or Little Buddy and then choose any cradle/holder that incorporates the Diamond adapter pattern (diamond adapter purchase is not required).
2. + =
CS IN EL AV
Description Adapter Part No. Prices RAM Universal Floor Diamond 11-09771 $33.65 Mount RAM Cessna Aircraft Seat RAM-B-131-202U Round 11-09436 $89.75 Rail Mount RAM Cessna Aircraft Seat RAM-B-131-238U Diamond 11-09773 $94.50 Rail Mount
RAP-SB-187U EZ-Strap
Model No.
RAP-SB-180U RAP-SB-187U
RAM Little Buddy Adhesive Mount 11-08584 $9.20 RAM EZ-Strap Rail & Yoke Mount 11-09774 $10.75
X-GRIP
Model No.
TO PS BV
The NEW RAM X-Grip is perfect for the modern pilot. Sleek, user friendly, and universal, the RAM X-Grip is the right cradle for the techno savvy pilot. Pats. Pend. Features: 1. Spring loaded holder expands and contracts for perfect fit of your device. 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts. 4. Single socket technology allows for multiple adjustment angles and articulation of device.
Magnifying Glass for GPS. Intended for RAM-MAG-1U use with diamond adapter and cradle 11-04299 $25.85 RAM-CIG- RAM 12 Volt Red/White Light Adaptor. 11-08580 $6.10 LIGHT-8U Plugs into 12v receiver
11-02080 $5.95
RAM-HOL-UN7BU
Model No.
RAP-SB-180-UN7U RAP-SB-187-UN7U
Description Part No. Prices
Ram Mounts are made in the USA and backed by a Lifetime Warranty.
RAP-SB-180-UN7U RAM X-Grip w/Little Buddy 11-09775 $26.75 RAP-SB-187-UN7U RAM X-Grip w/ EZ-Strap Mount 11-09776 $26.75 RAM-HOL-UN7BU X-Grip Cradle w/1 Ball Adapter 11-09777 $25.00
608
LOBSTER MOUNTS
UN-327 SUCTION BASE - Suction Base Only, If you are already using a Bolt-On or MC/ATV base, this allows you to easily transfer your device to your car or any place with a smooth surface. The Suction Base attachment ball is capable of being titled for extra versatility in positioning your device. This base, like the other products is produced for use in aviation and marine environments where being compass compatible and corrosion resistant are import. P/N 11-06616 .................$24.95 SH-334 SHRIMP SUCTION MOUNT WITH CAMERA TOP Our Suction Base attachment ball is capable of being tilted for extra versatility in positioning your device. The Camera Top (UN-310) has a removable 1/4-20 camera stud. It also features a mounting surface with holes and slots, which accommodate the AMPS standard (1.496 x 1.181) pattern for direct attachment to numerous electronic devices. This base, like our other products, is produced for use in aviation and marine environments where being compass compatible and corrosion resistant are important. P/N 11-06617 .................$31.50
CM WP ME HA AP LG EP CS IN EL
UNIVERSAL MC-ATV CLAMP - Base only! For an additional anchor point we offer this universal rail-clamping base, designed to fit square or round tubing from 3/4 inch to 1-1/2 inch diameter (by adding a 1/4-20 x 3 bolt, this base will fit up to 1-3/4 tube). This rugged base is made from extruded aluminum, an aluminum ball, and includes stainless steel hardware. Weight - Unit 0.5 lbs. P/N 11-04709 .................$24.85 UNIVERSAL CRADLE - The Cradle comes with four grip
fingers and one stop finger, which are capable of being positioned in any of the eight slots on the body. Rubber pads for the grip fingers and stainless steel hardware are provided. In the short direction, the grip fingers are adjustable from 1-1/2 to 3-1/4, and in the long direction, the grip fingers adjust from 4-1/2 to 5-1/2. For longer devices, the fingers on top could be left off, allowing the device to overhang the cradle base. This product, like our other products is produced for use in aviation and marine environments where being compass compatible and corrosion resistant are important. P/N 11-04710 .................$16.75
SHRIMP SERIES BOLT-ON WITH CAMERA TOP - A removable 1/4-20 camera stud, universal mounting ball-base and mounting flange, lanyard loop; accommodates the AMPS bolt up pattern (AMPS is a 1-1/2 by 1-3/16 screw hole pattern used in many portable electronic products). Aluminum alloy and reinforced composite parts with stainless steel hardware. P/N 11-04711 .................$16.75 SHRIMP SERIES MC/ATV CLAMP WITH CAMERA TOP - Same as our Bolt-On model, while adding a universal
rail-clamping base, designed to fit square or round tubing from 3/4 inch to 1-1/4 inch diameter (by adding a 1/4-20 x 3 bolt, this base will fit up to 1-3/4 tube). This rugged base is made from extruded aluminum, an aluminum ball, and includes stainless steel hardware. P/N 11-04713 .................$31.50
SHRIMP SERIES SUCTION + CRADLE - Our Suction Base attachment ball is capable of being tilted for extra versatility in positioning your device. Cradle (UN-198) comes with four grip fingers and one stop finger, capable of being positioned in any of the eight slots on the body. Rubber pads for the grip fingers and stainless steel hardware are provided. In the short direction, the grip fingers are adjustable from 1-1/2 to 3-1/4, and in the long direction, the grip fingers adjust from 4-1/2 to 5-1/2. For larger devices, the finger may be left out at the top allowing the device to overhang the cradle base. This mount, like our other products is produced for use in aviation and marine environments where being compass compatible and corrosion resistant are important. P/N 11-04716 .................$38.90
The rotating mount attaches to the Garmin yoke mount supplied with the GPS units. The GPS then mounts on the product and allows the GPS unit to be rotated so the passenger can view the unit if mounted on the pilots side. If used on the co-pilots side, then the pilot can rotate the GPS so he/she can view it as well. Note: The rotating mount is used for the Garmin GPS units (295,196,296,396) Rotating Mount-Pilot rotates right................. P/N 11-04661 ..........$64.85 Rotating Mount-Copilot rotates left............... P/N 11-04662 ..........$64.85
AV TO PS BV
SHRIMP SERIES MC/ATV + CRADLE - A universal railclamping base, designed to fit square or round tubing from 3/4 inch to 1-1/4 inch diameter. Made from extruded aluminum, an aluminum ball, and includes stainless steel hardware. Cradle comes with four grip fingers and one stop finger, capable of being positioned in any of the eight slots on the body. Rubber pads for the grip fingers and stainless steel hardware are provided. In the short direction, the grip fingers are adjustable from 1-1/2 to 3-1/4, and in the long direction, the grip fingers adjust from 4-1/2 to 5-1/2. For larger devices, the finger may be left out at the top allowing the device to overhang the cradle base..P/N 11-04717 ................$38.90
The photo illustrates the Model 241 040 fitted to a blank instrument panel. An adaptor plate (included with the mount) fits any standard 2-1/4" instrument panel hole so, generally, it can be fitted without any modifications to your airplane. If your application needs it, we can supply this mount with a 3-1/8" panel adaptor plate. If you don't have an unused panel hole, a viable alternative is to drill two holes and simply bolt the mount directly to your panel. The "footprint" area is only 2" x 0.5" so there's probably going to be somewhere you can make it fit. Naturally, you need to be certain this is appropriate, sensible and legal for your installation before drilling holes in your airplane. P/N 11-07238...........................$149.00
609
700mW* loud audio - Because air band radios are usually operated in high-noise environmetns, it is essential for the radio to provide loud clear audio. The IC-A14/S series employs a BTL amplifier that doubles the audio output, offering loud and clear audio thatll cut through cabin or tarmac noise. (*internal speaker only) Full keypad type or Simple keypad type - The ICA14 full keypad type allows you to input the channel or frequency directly and has an exclusive button for the 121.5MHz emergency channel. The IC-A14 receives NAV and WX channels. The IC-A14S simple keypad type provides simpler operation with a minimum of buttons that is suitable for ground crews. Compact, light weight and rugged body - The IC-A14/S series is compact (only 120.mm tall) and light weight (approx. 350g including antenna and BP-232N). The water resistant construction, equivalent to IPX4, provides reliable operation in wet conditions. Large capacity LithiumIon battery pack - With the 2000mAh large capacity Lithium-Ion battery pack, BP-232N, the IC-A14/S series provides stable output power and 18 hours long (approx.) operating time*. The BP-261, battery case takes 6 AA (LR6) alkaline cells for convenient battery backup. * Typical operation, Tx:Rx: Stand-by=5:5:90. 200 channels with memory banks - A total of 200* memory channels can be named with an 8-character channel name for easy recognition. For fast and simple operation, these channels can be grouped into 10 memory banks*. *IC-A14 only. The IC-A14S has 100 memory channels and memory banks are not available. Description Part No. Price ICOM IC-A14S Simple Keypad Version 110V 11-05903 $249.99 ICOM IC-A14 Full Keypad Version 110V 11-05904 $249.99 ICOM IC-A14S Simple Keypad Version 220V 11-06187 $249.99 ICOM IC-A14 Full Keypad Version 220 11-06188 $249.99
Accessories for A14 Description Model Antenna A4 A5 A6 A23 A24 FAB02AR Speaker Microphone HM173 Headset Adapter PAOPC499 Alkaline Battery Case (6 - AA Batt. Req.) BP261 7.2v 2000mAh Li-Ion Battery BP232N Desktop rapid Charger for BP230, BP231, BP232 BP160 Batteries. AC adptr. 110V - Used with the BP-160, it charges BC-145SA the BP-232N in approx. 3 hours AC adptr. 230V - Used with the BP-160, it charges BC-145SE the BP-232 in approx. 3 hours Belt Clip - Swivel type Belt Clip - Alligator type Drop In Desktop Charger 110V Cig Lighter Adptr Cbl for BC179 (12-24V) Drop In Desktop Charger 220V Rapid Charger (BC160-01) AC Adptr for use w/ BC119N & BC160 6 Way Rapid Chgr. w/ BC157(6-AD106 Req.) DC Pwr Cbl for BC119N or BC160 DC Power Cable for BC121N MB93 MB94 BC179-01 CP22 BC179-02 BC160-01 BC145 A/E BC121N OPC515L OPC656 Part No. 11-05031 11-05832 11-18537 11-06210 11-06211 11-07339 11-08672 11-08671 11-06212 11-06213 11-06214 11-06215 11-06218 11-06219 11-06220 11-05020 11-18533 11-05022 Price $29.95 $79.85 $47.50 $57.75 $52.50 $54.75 $62.75 $19.95 $8.85 $8.50 $37.65 $54.75 $37.65 $22.75 $9.75 $229.95 $18.50 $9.75
11-00612 $8.95 11-05020 $229.95 11-05002 $8.75 11-03494 $9.95 11-05832 $79.85 11-18529 11-08813 11-09425 11-09317 11-09346 11-10076 11-10075 11-10575 $22.50 $24.50 $29.95 $12.95 $6.95 $12.25 $11.85 $98.75
The Icom IC-4088A is a compact, inexpensive transceiver, water resistant and very easy to use. Channel changing is as simple as pushing the up/down keys. The radio can be controlled with only 5 button and a volume control knob. The easy to read LCD shows information at a glance.Other outstanding features includes: Economical AA alkaline batteries (3 not supplied) provide 30+ hrs of use, low battery indicator provides warning of battery condition when using alkaline batteries, rotary type antenna folds down behind radio, optional Ni-Cd battery pack and rapid charger, compact body fits neatly in your hand, and auto power-off timer (two hours). This radio is excellent for use in communicating with friends at airshows. P/N 11-18608 ..................$132.95
Accessories for icom IC-A4 Description AD-81 Desktop Charger Adapter BC-124 AC Adapter BC15702 is the power supply unit for the BC-121 CP-12 Cigarette lighter OPC-254l DC Power Cable for IC-A4, IC-A5, & IC-A23 BC-133 Trickle Battery Charger OPC-474 Cloning Cable (hanheld to handheld) OPC-752 Headset adapter MB-74N Alligator type belt clip MB-87 Swivel Belt Clip Nylon Carrying Case CP12L - Cigarette Lighter adapter (For use with A22, A23, A4, A5) w/ noise filter. Will only charge from 12 volts FA-801AR - Antenna OPC-254L - Power cable Part No. 11-18621 11-00615 11-05603 11-18594 11-18607 11-05689 11-02124 11-18602 11-05593 11-05686 11-18617 11-18604 11-05031 11-18607 Price .$15.75 $87.25 $91.75 $31.85 $16.85 $31.85 $15.25 $59.90 $9.75 $4.85 $23.95 $34.75 $29.95 $16.85
BC121N Icom 110v Power Supply For BC121n And & BC-197 BC197 Chargers
610
HANDHELD TRANSCEIVERS
Retaining the basic features of the very popular IC-R5, the IC-R6 has a new design and new features. 100 kHz 1309.995 MHz* wideband coverage. While the IC-R6 receives an ultra wideband frequency range, the radio provides superior sensitivity and receiver characteristics that is insusceptible to interference. Amateur stations, AM, FM, short wave broadcasts, TV audio* and a variety of utility communications can be caught and listened to. Frequency range depends on version. Analog TV audio only. Cannot decode digital TV audio. The IC-R6 has 100 channels per second high speed scan capability*. With the supplied rechargeable Ni-MH cells (1400mAh 2), the IC-R6 provides up to 15 hours of continuous receive capability*. At 50 mW output using external speaker. 1300 memory channels with 22 memory banks. The VSC opens the squelch only when a modulated signal is detected and ignores un modulated beat noise. The IC-R6 can be powered by rechargeable Ni-MH cells, or with alkaline batteries. Run the IC-R6 using the AC adapter, BC-196S, or opt for a cigarette lighter cable, CP-18. When used the optional drop-in charger stand BC-194 with the AC adapter or cigarette lighter cable, you can easily start charging the Ni-MH cells, while eliminating the need to connect the power source to the DC power jack of the receiver. Usable temperature range: +14 F to +140 F. Antenna impedance: 50 ohm (SMA). Dimensions:58(W) x86(H)x29.8(D) mm. Weight: 7.1 oz United States Version ........................P/N 11-08477 ...................$226.95 International Version..........................P/N 11-08476 ...................$229.95 The VXA-220 features 5 watts TX power output, loud audio (700 mw), long life nickel metal hydride battery, larger LCD display, 250 memory channels with programmable 8 character alpha numeric display, submersible design (3 feet for 30 minutes), NOAA weather receive ( 10 channels). All of this is backed by the manufacturers 3 year parts and labor warranty. The VXA-220 uses the same accessories as the popular VXA-300. Includes: VXA-220 COM , FNB-83: 1400 mAh Ni-MH battery, CD-32: Charging Cradle, CN-3: SMA TO BNC Adapter, FBA-25A: Alkaline Battery Tray, ATV-10: Helical Antenna (Q3000194), E-DC-5B: DC cable with 12v cigarette lighter plug, PA-48B: 110VAC Overnight charger, CT-96: Headset Adapter Cable. Note: The 220v model comes with the PA-48C: 220VAC Overnight charger. VXA-220 PRO VI 110V ..............P/N 11-05054 ......................... $215.00 VXA-220 PRO VI 220V ..............P/N 11-07029 ......................... $215.00 Yaesu CD-32 Charger Cradle ....P/N 11-09277 ........................... $41.90 The VXA-300 Aviator Pilot III is the result of over 45 years of engineering know how. The pilot III features a more powerful audio amplifier than ANY other handheld airband transceiver and comes supplied with a 1400 mAh nickel metal hydride battery pack that provide almost double the battery capacity of Icoms IC-A23 or IC-A5! Includes: VXA-300: 5W Portable VHF Transceiver with VOR, ATV-10: Helical Antenna (Q3000194), CN-3: SMA to BNC adapter, FBA-25A: Alkaline Battery Tray, FNB-83: 1400 mAh Ni-MH battery, CD-28: Charging cradle, E-DC-5B: DC cable with 12v cigarette lighter plug, PA-48B: 110VAC Overnight charger, CT-96: Headset Adapter Cable. Note: The 220v model comes with the PA-48C: 220 VAC Overnight charger.
Part No. Price 11-02716 $245.00 11-04342 $245.00 VXA-300 PILOT III ACCESSORIES (Included) Description Part No. Price ATV-10 - Rubber Duck antenna (included) 11-04343 $22.00 CT-96 - Headset Adapter For VXA-300,700, 710 11-02562 $10.75 NC-88B -110V,12hr charger. Req. CD-28 charging stand 11-09461 $23.85 CD-28 - Overnight desktop charger cradle. Requires 11-04346 $9.90 NC-88 wall charger Yaesu Vertex 220v Wall Charger For Vxa 220 300 710 11-09915 $24.95 FNB-83 - 7.2v 1400mah Ni-MH battery (included) 11-04347 $33.90 Clip-14 - Swivel belt clip (included) 11-04340 $7.20 VXA-300 PILOT III ACCESSORIES (Optional) Description Part No. Price CN-3 SMA to BNC Antenna Adapter - Antenna Adapter 11-16957 $9.75 For VXA-150, VXA-210, VXA-300, VXA-700, VXA-710 E-DC-5B - 12V Cigarette Lighter Adapter for all Yaesu 11-16961 $24.75 Standard airband transceivers. MH-44B4B - Speaker Mic for VXA-700,300,710 11-02381 $49.95 Rubber Duck Antenna for VXA-100/150/210 11-00827 $14.50 VXA-300 VXA-300/C Description
A first in aviation communications! Yaesu Standard has combined over 50 years experience in amateur radio communications and our expertise in aviation communications to make the worlds first Air Band, VOR Navigation and VHF Business Band Radio receive handheld transceiver! Includes: VXA-710: 5W Portable Multiband Transceiver with VOR, ATV-9: Helical Antenna (Q3000188), CN-3: SMA to BNC adapter, FNB-80LI: 1400 mAh Ni-MH battery, PA-48B: 110VAC Overnight charger, CT-96: Headset Cable. Note: The 220V model comes with the PA-48C: 220VAC Overnight charger. Yaesu Transceiver w/ 117V Charger .............. P/N 11-04337 .... $297.00 Yaesu Transceiver w/ 220V Charger .............. P/N 11-04338 .... $319.00 Accessories (Included) Description ATV-9 Dual Band Rubber Duck Antenna CT-96 Headset Adapter NC-72B 120 Volt 12 Hour Charger FNB-80LI 7.2v 1300mah Li-Ion Battery Accessories (Optional) Description Swivel Belt Clip PC Programming kit for VXA700 only CN-3 SMA to BNC Antenna Adapter E-DC-5B 12 V Cigarette Lighter Adapter FBA-23 Alkaline Case for VXA-700, 710 CSC-88 Soft Case for VXA-700, 710 MH-44B4B Speaker Microphone CD-15A Desktop Rapid Charger (117V) 220v Wall Charger For VXA 220 300 710
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No. 11-02561 11-02562 11-05864 11-02563 Part No. 11-04340 11-02564 11-16957 11-16961 11-02565 11-02566 11-02381 11-02567 11-09915
Price $22.00 $10.75 $24.75 $96.50 Price $7.20 $72.00 $9.75 $24.75 $32.50 $19.85 $49.95 $38.75 $24.95
AR-108 is a full-featured handheld Air-Band Scanner with weather channels. The AR-108 is small, rugged and compact. The features include 10 weather channels; 9-digit/24 icon backlit LCD display; 99 programmable memory channels; selective channel steps; scans from either the pre-programmed memory channels or the entire aviation frequency band; key lock; key beep tone on/off; battery power saver; powered by 2 AA batteries. Includes: scanner, antenna, beltclip and manual. 1yr warranty. P/N 11-18505 ........ $97.50 Accessories AR-108 Protective Case ................................ P/N 11-04997 ........ $12.80
Yaesu Standard E-DC-6 DC cable; plug and wire only. P/N 11-08490 ..........................$8.50
High-quality Push-To-Talk switch. Universal In-Line PTT Switch W-103 P/N 11-07087 ....................... $18.95 The CBE-210 is a DC battery eliminator for ICOM handheld radios such as the IC-V8, F3GT, F4GT, & F21GM. One end plugs into a 12-13.8VDC lighter socket. The coiled cord links the lighter plug to the battery housing, which clips onto the back of the radio. The CBE-210 includes Voltage & Current-limiting circuitry; noise filtering circuitry is also built into the housing. 5A fuse is located in the Cig Plug. P/N 11-08252.......................... $23.95
611
The BC370CRS scanner is a multifeatured conventional channel scanner with All Hazards alert. You can easily enter and store frequencies for police, fire/emergency, marine, air, amateur, and other radio services into 300 channels distributed over ten banks. The scanner also alerts you when NOAA (National Oceanic and Atmospheric Administration) or any broadcast station the scanner is tuned to issues an EAS (Emergency Alert System) signal. These alerts are issued for severe weather, homeland security, and law enforcement events (such as Amber alerts). P/N 11-04736 ......... $234.95
This antenna kit attaches to the inside of the windshield & dramatically improves portable nav/ coms transmit, receive, and VOR performance based on extensive field testing. It is portable and ideal for those who cant use an ANT-SB. Simply attaches ones own flexible antenna to inside of windshield with BNC, coax, suction cup adapter. Works with any handheld radio using BNC connections. P/N 11-18603 .............. $28.95
Aviation radio communications are now available to you with Gleim's Aviation Radio Receiver. Monitor the entire aviation frequency band! This radio is very portable, easy to operate, and extremely cost effective. Enjoy Listening to aircraft and air traffic control communications and build your proficiency in "pilot speak". This radio receiver is an integral part of GLEIM's Watching Airplanes Course- a tool to assist those interested in aviation to learn more about it. The KA11Air receiver comes with two AA batteries, the earphones, and external antenna. ...... P/N 13-06717 .................. $63.50
Monitors the entire aircraft band without tuning! Passive design, can be used onboard aircraft, no local oscillator, generates and creates no interference whatsoever!! Great for air shows! Patented circuit and design! For decades we have been known for our novel and creative product designs. Well, check this one out! An aircraft receiver that receives all nearby traffic without any tuning. It gets better... there is no local oscillator so it doesnt produce, and cant produce, any interference associated with all other receivers with an LO. That means you can use it onboard aircraft as a passive device! And what will you hear? The closest and strongest traffic, mainly, the one youre sitting in! How unique is this? We have a patent on it, and that says it all! P/N 11-04735 ......................... $159.95
612
SORCERER AS AUTOPILOT
DIGITRAK AUTOPILOT
This display is like an artificial horizon in roll and actually moves in unison with it. This makes the transition from viewing the horizon much easier than the reverse display of the turn coordinator. Uses a solid state gyro instead of a spinning rotor. The Pictorial Turn & Bank is superior to a turn coordinator in all ways. It looks and flies like the roll display of an artificial horizon. It agrees with the real horizon, so one does not have to reverse his or her sensing when entering or exiting IMC. The roll response is without lag just as it is in an artificial horizon. Of most importance, it is easier and safer for the non-instrument pilot to fly. 12-28 Volts - Weight-6oz 2-1/4 ................... P/N 11-02834........... $480.00 3-1/8 ................... P/N 11-02628........... $530.00 The Gemini ADI is a glass replacement for the ADI. Touch Screen. Sunlight readable. Fits Standard 3.125 Cut-out. Velocity Vector Display. Pitch Atitude Display. Full access to all ports. Bank Angle Display. Vertical Speed Display. Track DG. Slip / Skid Indicator. Standard Rate Turn Indicator. Low Airspeed Warning P/N 11-10451........... $995.00 Features: GPS-Slaved solid-state DG Digital Ground Track Selector GPS Nav Mode True Control Wheel Steering Altitude Hold Altitude adjust for baro change Built-in ADI: Bank angle is instantaneous gyro data. Pitch is gyro enhanced vertical speed. Direction is an electronic DG showing track. Extreme bank angle is enunciated by flashing red arrows which indicate required stick motion to correct unusual attitude. Low airspeed warning is enunciated by flashing A-S on the display. 12-28 Volts only Programmer Dimensions 3.4H x 3.4W x 4.7D Standard weight including servo 6lb P/N 11-04675........ $3,850.00 Bank angle is instantaneous gyro data. Pitch is gyro enhanced vertical speed. Direction is an electronic DG showing track. Extreme bank angle is enunciated by flashing red arrows which incidcate required stick motion to correct unusual attitude. Low airspeed warning is enunciated by flashing A-S on the display. Solid state rate gyros for pitch and roll. Built in GPS (optional) Backup battery (optional) Power: 12-28 Volts ADI 2 is 2.5H x 2.5W x 6.75D. ADI 3 is 3.4H x 3.4W x 4.6D. Description TruTrak ADI 2 With GPS Option TruTrak ADI 2 Without GPS TruTrak ADI 3 Without GPS 120KNT + Part No. 11-05735 11-05736 11-05655 Price $1,400.00 $1,250.00 $1,050.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Yaw Damper employs a solid state rate gyro to damp out short term yaw oscillation, and a transverse accelerometer to control rudder position long term, so as to keep the ball centered. The Yaw Damper can be added to the DFC-200 or Sorcerer autopilots. 2.05 H x 4.12 W x 1.69 D 12-28 volts Standard Weight including servo 3.25lb (Servo Must be Purchased Separately) P/N 11-02972 .......$1,425.00 Failsafe Automatic Pitch Trim can be added to any system with vertical speed select. TruTrak is the only company serving the experimental market to offer Failsafe Automatic Pitch Trim; this ensures that a single failure will not cause runaway trim. Automatic Trim can be added to the Yaw Damper. 2.05 H x 4.12 W x 1.69 D 12-28 volts Weight 4lb P/N 11-02970 ..........$350.00
AUTOMATIC TRIM
DIGIFLIGHT IIVS - Fits Standard 2.25 Round Instrument Hole Built-in Digital Slaved Directional Gyro Digital Track Selector GPS Nav Mode Altitude Hold 12-28 Volts All Solid-State Sensors Simple Intuitive User Interface Climb and Descend on Vertical Speed Trim Sensing Pitch Servo that Annunciates for Trim Lighter and Smaller then Comparable Systems True Control Wheel Steering* Dims - 2.5H x 2.5W x 5.5D Flat Dims 1.6H x 4.3W x 5.5D Standard weight including servos 6lb TruTrak Digiflight IIVS ..............................P/N 11-02633 .........$3,350.00 TruTrak Digiflight II VS FLAT ...................P/N 11-03147 .........$3,350.00 DIGIFLIGHT IIVSGV - Fits Standard 2.25 Round Instrument Hole Optional Flat Rack Mounting Built-in Digital Slaved Directional Gyro Digital Track Selector GPS Nav Mode GPS Steering Altitude Hold All Solid-State Sensors 12-28 Volts Simple Intuitive User Interface Climb and Descend on Vertical Speed Trim Sensing Pitch Servo that Annunciates for Trim. Vertical GPS Steering (GPSV) Dims: 2.5H x 2.5W x 5.5D Flat Dims - 1.6H x 4.3W x 5.5D Lighter and Smaller then Comparable Systems True Control Wheel Steering* Standard weight including servos 6lb TruTrak Digiflight IIVSGV RND ................P/N 11-05549 .........$4,700.00 TruTrak Digiflight IIVSGV FLAT ...............P/N 11-03151 .........$4,700.00
Designed to interface with Garmin G3X Fits Standard 2.25 Round Hole Built-in Ground Track DG Track Select Mode Altitude Hold VS Select Mode EFIS Mode (Lateral and Vertical Steering) Control Wheel Steering Pitch Trim Annunciation 12-28 Volts 2.5 H x 2.5 W x 5.5 D P/N 11-08553 ................$2,990.00 ( Easy Installation ) Can be used alone or with any roll servo Autopilot Only panel space required is for engage/ disengage button Solid-state gyroscopically-controlled pitch axis Flight dynamics equal to higher priced systems Control Wheel Steering Available with vertical speed select (Altrak VS) 12 Volts only Programmer Dimensions 3H x 0.9W x 2.8D Standard weight including servo - 3 lb................... P/N 11-02032........ $1,550.00 TruTrak Altrak VS .............. P/N 11-02631........ $1,850.00
Gyro / VS pitch display. Bank Angle Display. Built-in Ground Track DG. High Bank Angle Warning. Low Airspeed Warning. Specifications: 2.5 H x 2.5 W x 6.625 D Without GPS ................... P/N 11-08539........ $1,250.00 With GPS ........................ P/N 11-08540........ $1,400.00
TRUTRAK GX PILOT
FLIGHT DIRECTOR transitions to an airspeed mode in which airspeed is held at or above a minimum value preset to the specific aircraft. The main thing that sets this new EFIS apart from other units is flyability Beyond flyability is ease of operation - The use of labeled soft keys makes the unit so simple to operate that a manual is not even necessary. Picture quality second to none - This system is bold and readable (more like the painted lines in good old steam gauges). Sunlight readability and viewing angle beyond all others. - Readable in ALL lighting conditions and can be seen at the widest viewing angle of any system in comparable price range. ........... P/N 11-05969 .. $2,800.00 EFIS AP III EFIS built-in dual axis AP - AS ....P/N 11-05988 .. $8,000.00 EFIS AP IV EFIS built-in dual axis AP - HB....P/N 11-05991 .. $7,250.00 EFIS AP IV EFIS built-in dual axis AP - AS ....P/N 11-05994 .. $7,250.00 12-28 Volts. EFIS GP is available in three bezel types: FM - Front Mount, DC - Diagonal Corner, AS - Avionics Stack. FM: 6 H x 7.25 W x 3.3 D. DC: 5.85 H x 6.45 W x 3.3 D. AS: 5.85 H x 7.05 W x 3.3 D. Features: Airspeed, Altimeter, Artificial Horizon: Attitude, Velocity Vector, Vertical Speed Indicator, Track DG, Current Selected Waypoint, Distance to Waypoint, HSI: GPS CDI, Slip / Skid Ball, Standard Rate Turn Indicator, Bank Angle Indicator, Adjustable Heading Bug, Altitude Bug, Round or Rectangular Airspeed and Altimeter, High Bright / Sunlight Readable LCD.......P/N 11-08463 ..CALL FOR QUOTE 2 Axis Autopilot Option ....................P/N 11-08563 ..CALL FOR QUOTE
TRUTRAK EFIS SG
TRUTRAK EFIS GP
613
This pro Pilot autopilot product, the GX PRO, is designed for use with the Garmin G3X EFIS System. It is available in two models: GX PRO Instrument Mount - It mounts in a standard 3-18 instrument cutout. When driven by a G3X EFIS, it has full GPSS and GPSV capability without the need for an ARNIC 429 data interface, thus lowering the cost substantially. Includes 2 servos and servo installation kit. P/N 11-09714..........$2,995.00 GX PRO Stack Mount - This includes a metal sleeve that may be mounted into a radio stack, allowing the unit to be removed from the front. It has the same characteristics as the instrument mount system. Includes 2 servos and servo installation kit. P/N 11-09715..........$3,095.00
GX PRO AUTOPILOT
TRIO AVIONICS
The Commander 2900K is Lone Star Aviations Docking Station for BENDIX/ KING/HONEYWELL KLN 900 DZUSMounted GPS. The portable docking station is designed to let you explore the KLN 900 features in a non-flying environment...in the comfort of your home or office. Operation is simple and fast, just slide your KLN 900 into the Commanders Tray and you are ready to go. P/N 11-04911 ..........................$379.00 Lone Star Aviations Docking Station for Garmins GNS 430/530 Flight Management System. The Commander is a portable Docking Station designed to let you explore the Garmin GNS 430/530 features in a non. Features:Simulate your route of flight and published approaches. Access sids and stars. Program and store flight plans. Simulate approaches. Enter and store waypoints. Reduce your learning curve. Operating your GNS430/530 in flight will become automatic. GNS-430...................................... P/N 11-04864......................... $249.00 GNS -430 INT.............................. P/N 11-04865......................... $259.00 GNS-530...................................... P/N 11-04866......................... $269.00 GNS-530 INT............................... P/N 11-04867......................... $279.00 The Commander 2000 GNS480 is a Docking Station designed to allow you to explore the Garmin GNS-480(CNX-80) features in a nonflying environment. Features: * Simulate your route of flight and published approaches * Access sids and stars * Program and store flight plans * Simulate approaches * Enter and store way points * Reduce your learning curve * Operating your GNS-480(CNX-80) in flight will become automatic P/N 11-04916 .......................... $259.00 Lone Star Aviations 2900 Station has been designed for the KMD 150, KMD 250 equipment so that the user can practice their GPS, Display and all of its functions in a non flying environment. The 1 port cooling fan (LS03-02013) plugs into the rear accessory panel and provides 6-8 CFM of cooling to the KMD 150/250 receiver. The KMD connectors plug into the rear panel of the Commander Station for an easy set-up so you can get right into the training mode. P/N 11-04922 .......................... $279.00
Lone Star Aviations Commander Station has been designed for the Wulfsberg C-5000 Control Head equipment so that the pilot can practice GPS, control head functionality at his or her own pace in a non flying environment. The 1 port cooling fan ( LS03-02013) plugs into the rear accessory panel and provides 6-8 CFM of cooling to the C-5000 receiver. P/N 11-04928 ............................... $379.00
Prices Subject to Change Without Notice
614
Brand New from Lone Star, Commander GTN-650 Docking station designed for one of Garmins new exciting products. Comes with everything you will need to run your GTN650, including a chassis mounted avionics cooling fan.P/N 11-10593..................$348.75
The Trans-Cal Model ATS-400 is designed to test, display and simulate the output of Altitude Reporting Equipment, which conform to the ICAO Standard for SSR Pressure Altitude Transmission. In accordance with the U.S. National Standards for I.F.F. Mark X (SIF)/Air Traffic Control Radar Beacon System SIF/ ATCRBS. The ATS-400 will also display the output of altitude reporting equipment which transmit serial data in either RS232, RS422, RS485 or ARINC 429 Label 203. The ATS-400 may be used in the aircraft or on the bench making this an extremely versatile piece of test equipment. P/N 11-09607 ......................$1,595.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Brand New from Lone Star, Commander GTN-750 Docking station designed for one of Garmins new exciting products. Comes with everything you will need to run your GTN750, including a chassis mounted avionics cooling fan.P/N 11-10594..................$348.75
The EET-200 provides the avionics technician a clean, quick and reasonably priced method of emulating an altitude encoder output by providing a known good altitude code source to aide in isolating each data bit D2 through C4. Simply unplug the altitude encoder and substitute the EET-200; rotating the knob will move the transponder through a variety of preprogrammed altitudes testing each data bit in sequence. P/N 11-09606 .........................$347.95 The NC 2210 Tester is optimized for ramp testing of navigation and communication equipment. The unit provides test signals for marker beacon, communication, localizer, glide slope, and VOR. Also included, is a wide band comm receiver to permit evaluation of comm transmitter AM fidelity. The TKM NC 2210 is a NAV-COMM Ramp Tester. The unit has improvements over the 2200, which it replaces. The improvements include the following: Higher RF power Precise localizer and glide slope deflection Calibrated VOR bearings at 10 degree increments Crystal controlled modulation frequencies Longer battery life Internal antenna with adjustable length Smaller size. Specifications: Size: 3.8 x 7.4 x 2.3 Weight: 1.3 lbs. Power: Internal battery with over 2 hours running time (110VAC charger included) Warranty: 2-year from date of purchase. P/N 11-01813 ......................$1,435.00
Pre-wired in the take home mode. Simply slide your KLN90A/B, KLN89/B, KLN35 Series, and KLX-135 Series GPS or GPS-COM, into the tray and explore your GPS receiver as if you were flying. Practice actual flight or approach at home, store flight plans, and learn all of your units functions. Update your units database via the internet using a desktop or laptop computer & save up to $300/year. Appropriate connector is shipped free via UPS Blue Label from the factory. Additional connectors, cooling fan, Argus and moving map interface available. 2000K Station ............................P/N 11-18478 ...........................$240.95 2000K 220VAC..........................P/N 11-04876 ...........................$269.00
COMMANDER 2000K
Lone Star Aviations Docking Station for the Commander 2900 2101/CUGR GPS System is designed to allow you to explore the FreeFlight Systems 2101/CUGR features in a non-flying environment. Ideal for Guard Units, EMS, Law Enforcement, DEA, Boarder Patrol, etc. staff training. Unit does not include cable. P/N 11-04926 ..........................$379.00
The 3300 is designed to test ATC transponders on the bench as well as when they are installed in aircraft. As such the 3300 contains an interrogation transmitter. The intended range of the interrogation is less than 100 ft. When used for Ramp testing the interrogation signal is comprised of pulse groups (PG) transmitted at a PRF of 2353 PG/S P/N 11-08560 ......................$2,095.00 The TKM MC 60 is designed to provide a display for a variety of Nav signals including ILS, LOC, Back course, LOC, GS, GPS, and MB. The VOR display includes a Left and Right bar graph with an OBS and a tracking mode with reciprocal selection. When a GPS is selected by grounding the enableline, GPS is displayed in the OBS window and VOR and LOC functions are disabled. When the GPS is not enabled the VOR/LOC selsction is made by the ILS enable line from the associated Nav receiver. Back Course selection is made by grounding the back course enable line. The digital display includes OBS, bearing, LOC, BAC, and GPS. The bar graph display contains 10 dots forLeft, Right, Up, and Down. The center dot is used to indicate valid signals for LOC, VOR, or GPS. A Glide Slope light indicates a valid Glide Slope signal. P/N 11-04594.....................$497.00
MC 60 NAV CONVERTER
LONESTAR ACCESSORIES
Description 1 Port Dock Station Cool Fan Multi-Signal Coverter KA-20 Mounting Bracket MX-20 Power Supply and Cable Kit USB to Serial Converter 150, 155, 165 Garmin Connector II Morrow with GX-55 II Morrow GX60 Connector II Morrow GX50 Connector CNX-80 Power / Simulation Harness Garmin 100 Connector 250, 300 Garmin Connector II Morrow 2001 Connector USB Military Cable KLN-89B-94 Data Cable KLN-88-Power Cable KLN-35A Power Cable KLN-89B 94 Power Cable KLN-90A/B Power Cable KLX-135 Power Cable KLN-900 & A/C Panel KLN-900 Power Cable SD Converter TSO 24-13.8 VDC DC Converter TSO 24-16 VDC DC Converter 24-19VDC TSO 6 Port Cable Kit 36 6 Port Cable Kit 60 Part No. 11-04859 11-04892 11-04873 11-04869 11-04884 11-04899 11-04900 11-04904 11-04906 11-04918 11-04903 11-04902 11-04901 11-04891 11-04882 11-04881 11-04880 11-04879 11-04878 11-04874 11-04913 11-04912 11-04894 11-04895 11-04898 11-04914 11-04915 Price $57.00 $752.95 $59.95 $479.95 $58.95 $38.95 $48.95 $58.95 $86.75 $86.75 $79.50 $48.95 $38.95 $99.95 $48.95 $48.95 $48.95 $48.95 $58.95 $58.95 $49.95 $86.75 $499.95 $499.95 $499.95 $39.95 $49.95
Quick Shot is a compact, rugged binder type manual which shows detailed wire pin-outs for a wide variety of general aviation avionics equipment. Each page is removable and very durable. The wiring diagrams in Quick Shot Volume 1 include Apollo/UPS, Bendix, Garmin, Icom, Sandel Mid-Continent, Sigtronics, United, Telex, David Clark, PS Engineering, Narco, Val, and many more. P/N 11-01623 ........................... $56.50
A revolutionary product that allows you to easily install and connect avionics into an existing aircraft or one you are building. Designed to accept and connect most NAV/GPS/COM, modern audio panels, intercoms, VOR indicators, moving map displays, HSIs, RMIs, ADFs, annunciators, mode control and almost any send and receive RS-232 formatted device. Approachs custom cables are made to connect with the Fast Stack Pro Hub and associated avionics and come with connectors installed. Virtually No Hand wiring Lower Upgrade Costs Single Point Grounding P/N 11-04731 .......................... $582.00
PRO HUB
615
ELTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The COSPAS/SARSAT search and rescue network will discontinue monitoring the current 121.5/243.0 MHz frequencies as of Feb. 1, 2009. The 121.5/243.0 MHz frequencies will continue to be monitored on a voluntary basis by overflying aircraft and utilized by the current search and rescue organizations. After this date, the COSPAS/ SARSAT will monitor only 406 MHz. The 406 MHz aircraft ELT, defined by COSPAS/SARSAT operational specifications, incorporates many new features and improvements for search and rescue. To comply with the new requirements, Pointer, Inc is pleased to announce the Model 8000 series ELT. The transmitter design incorporates the functional and programming requirements of COSPAS/SARSAT specification CST.001, FAA RTCA DO-204 and TSO-C126. The Pointer ELT Model 8000 series transmits phase modulated aircraft identification data on the 406 MHz frequency to quickly identify an emergency . The unit also transmits 121.5 MHz frequency for airborne and ground search operations. Optional features include factory or field programming of the microprocessor as a separate module and internal GPS. The approval program is in process and have completed COSPAS/SARSAT testing. FAA testing has begun. EBC-102A Signal only ELT .................... P/N 11-02575 ............ $529.00 EBC-502 Portable Cabin Mount ELT ..... P/N 11-02576 ............ $489.00 EBC GS21 ELT Battery.......................... P/N 11-04771 .............. $32.50 The all new E-04 ELT is a direct replacement for the more than 62,000 model E-01 ELTs (by ACK) on the market today. The new E-04 fits directly into the current E-01 mounting trays and uses the same remote control panel indicator. The E-04 external antenna will utilize your current antenna mounting and wiring installations. Undergoing certification testing, ACK is not accepting orders for the E-04 until ELT certification process is complete. Features: * Accepts GPS position imput data from Bendix/King. Garmin, Nema 0183 GPS * New antenna is swept back 20 degrees, and features a molded plastic base. * 5 watts @ 406MHz for 24 hours, and 100 Mw @ 121.5 MHz for 48 hours. * New simple plug in audible alert indicator. * New lithium battery pack offers a 5 year battery life, and makes it substantially lighter. * Can use Ameri-king remote panel indicator Description ACK E-04 406MHZ ELT Kit ACK E-04 406MHZ ELT Kit INTL. Accessories ACK E-01 TO E-04 Retro FIT Kit ACK E-01 TO E-04 Retro FIT Kit INTL. E-04 Whip Antenna RCPI Cable For ACK 406/121.5 MHZ ELT Part No. 11-06395 11-09582 Part No. 11-06396 11-09231 11-10465 11-09971 Price $598.00 $625.00 Price $549.00 $603.00 $99.95 $18.75 Emergency Beacon Corporations ELTs are among the most popular on the market today due to their size, weight and convenience. EBC-102A is the smallest cabin mounted ELT available. Operating the toggle switch on top of the unit allows manual activation or pre-flight testing of the EBC-102A. The EBC-502 is fully approved by the FAA and FCC under TSOC91a . It uses a 9V battery pack and comes complete with a handhold lanyard, mounting bracket, and batteries. It is easily installed and requires no external antenna or cabling.
EBC ELTS
The Model 3000 (AF/AP) and 3000 (AF) which have been in production for twenty years are now revised to incorporate the upgrades of RTCA DO-183 for emergency locator transmitters.The new models, designated 3000-10 (AF/AP) and 300011 (AF) are interchangeable with existing units in form, fit and function. The 3000-10 and 3000-11 transmitters incorporate an alkaline battery pack specifically designed to endure the short term extreme thermal variations and mechanical shock requirements of RTCA DO-183. Installed weight is 2.0 lbs. Emergency voice transmission is provided on the 3000-10 transmitter if desired. Size: 3 Size: 3 1/2W x 7 5/8H x 2-3/4D. P/N 3000-10 ..... $464.00 P/N 3000-11 ...... $448.50 Accessories: Battery pack, 2-year Alkaline ... P/N 11-17950 ....... $22.95 Mounting bracket assembly ..... P/N 2017 .............. $49.50 Master switch guard kit ............ P/N 2021 .............. $11.75 Remote panel switch kit ........... P/N 2019 .............. $52.50 2019-10 Remote switch kit ....... P/N 11-05889 ....... $52.75 Fixed (remote whip) antenna ... P/N 3001 .............. $59.75 Coaxial antenna cable.............. P/N 3002 .............. $39.50 Telescopic antenna w/tether .... P/N 2006 .............. $35.25
ELT Replacement antenna................................P/N 11-17961 .... $43.50 ACK E-01 ELT G-Switch E-01G........................P/N 11-05537 .....$49.95 RCPI Unit / Remote Switch / E-01 (E-01-05) ....P/N 11-05262 .... $47.75
We now offer the complete line of ELT replacement battery packs. These top quality battery packs are factory new & meet or exceed FAA TSO-C91a and are also Transport Canada approved. Request current price on any ELT replacement battery or ELT, not shown here. NOTE: ELT Replacement Batteries are non-returnable due to shelf-life. Application Part No. Price Application Part No. Price Narco (2 yr.) (ELT10) Bp-1010 BP-1020 Dorne & M. (2 yr.) 11-17920 $24.95 11-17945 $25.85 Approved for Canadian use. BP-1045 EBC102/302 (2 yr.) - GS-21 11-17925 $23.75 BP-1015 Sharc-7 (2 yr.) 11-17955 $21.95 BP-1035 Garrett R88 (2 yr.) 11-17930 $33.65 452-0130 Artex 110-4 11-17957 $79.95 BP-1005 Merl/Larago (2 yr.) 11-17935 $43.75 P/N 11-04758 EBC 502 - GS-52 11-02577 $59.95 BP-1040 Martec Eagle 11-17940 $59.75 452-3063 ELT-200 11-14935 $41.85 BP-1026 CIR-11 11-17910 $49.90 BP-1030 Pointer (2 yr.) 11-17950 $22.95
616
ELTS
Encapsulated electronics and battery packs to provide for added protection against shock, moisture, and other environmental hazards. Built-in monitor that emits a loud beeping tone if the ELT is activated. Can be activated either automatically or manually. Should be installed in the cabin of the aircraft. Allows for easy removal of the ELT in case of an actual emergency - just disconnect the external antenna coax cable and attach the survival antenna. The EBC 406 AF-Series should be installed in the tail section of the aircraft for those who prefer that ELT location. In that case, a remote unit is provided for the aircraft panel so the the ELT can be controlled by the pilot. Survival antenna is used when the transmitter is removed from the aircraft. All EBC 406 ELTs have a built-in self test feature that allows the pilot to check 406 power and the antenna-coax connection. Both cabin and tail mount ELTs use an external antenna. Features: Operating Freqs: 406.028 MHz and 121.5 MHz Output Power on 406 MHz: 5W for 24 Hours at -20C Output Power on 121.5 MHz: 50mW min for 50 Hours at -20C Operating Temperature: -20C to +55C Useful Battery Life: 5 Years or 1 Hour of Cumulative Use Modulation 406 MHz: Biphase L (16KOG1D) Modulation 121.5 MHz: Swept Tone 1600Hz to 300 Hz, 2-4 Times/Second Automatic Activation: Velocity Change of 4.5 feet per Second Altitude: 50,000 feet Decompression: 8000 feet to 40,000 feet High Pressure: -15,000 feet Humidity: 95% for 50 Hours Shock Performance: Withstands 500Gs on 6 axes Vibration: Withstands 10 Gs Immersion: Withstands 24 hours in Salt Water Warranty: 2 Years, Made in the USA.
Model Description For fixed wing aircraft. Includes transmitter, survival EBC 406AP antenna, mounting bracket, external whip antenna with cable & battery pack. For cabin/cockpit installation. For fixed wing aircraft. Includes transmitter, survival antenna, mounting bracket, external whip antenna EBC 406AF with cable, remote control monitor with connector kit & battery pack. For aircraft tail installation. EBC Same as AP system but with omni-directional helicop406APH ter activation system. For helicopter use only. Same as AF system but with omni-directional helicopEBC ter activation system. 406AFH For helicopter use only. Same as AF system but with omni-directional helicopEBC ter activation system. For helicopter use only. (Inter406AFH national Version) EBC Cabin mounted tri-frequency ELT (406.028, 121.5 and 406HM 243.0 MHz) Non-reflective flat black for night vision equipment contractility. With integral antenna, omni-diEBC406HM-INT rectional helicopter activation system and battery pack. Same as EBC 406AP but finished in non-reflective flat EBC black for night vision equipment compatibility. Tri-fre406APM quency signal. Comes with external rod antenna. Same as EBC 406AF but finished in non-reflective flat EBC black for night vision equipment compatibility. Tri-fre406AFM quency signal. Comes with external rod antenna. Same as EBC 406APM but with the addition of an EBC omidirectional helicopter activation system. For cabin 406APHM mounting. Comes with external rod antenna. Same as EBC 406AFM but with the addition of an omiEBC directional helicopter activation system. For tail mount406AFHM ing. Comes with external rod antenna. Model GS-46 BB-12 BB-12M BB-14 Part No. 11-05917 Price $998.00
The AK-450 ELT from Ameri-King is FAA TSO-C91a approved & meets FCC rule for improved satellite detection. It features voice transmitting capability, visual on lights for both ELT main unit and remote panel, and uses standard Duracell batteries (included). Includes low drag aircraft antenna, portable antenna, remote control panel, wiring and coaxial cable assembly, handheld lanyard web, mounting tray and clamp. Size: 4.27w x 2.95h x 5.64l. Wt: 2 lbs.,10 oz. 2 yr factory warranty ATTENTION: 2009, the international COSPAS-SARSAT satellite system will no longer provide satellite-based monitoring of the 121.5/243 MHz frequency. After the date of the satellite termination, in 2009, 121.5 MHz signals transmitted from ELTs operating on the lower frequency will only be detected by ground-based receivers such as local airport facilities or air traffic control facilities or by overflying aircraft......................................................P/N 11-02790 .............$179.00 ELT for helicopter (6 axles) AK450-1 ......P/N 11-01249 .............$626.00 AK-450 Cable Assembly .........................P/N 11-04973 ...............$12.85 AK-450 Remote Switch ...........................P/N 11-04937 ...............$46.75 AK-450 Coaxial Assembly .......................P/N 11-04938 ...............$11.95 2 Year Warranty ......................................P/N 11-05793 ...............$46.75 AK-450 antenna 450017 .........................P/N 11-03303 ...............$38.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
11-05918 $1,235.00 11-05919 $1,394.00 11-05920 $1,562.00 11-10009 $1,562.00 11-05921 $1,114.00 11-07240 $1,178.00 Intl 11-05922 $1,750.00 11-05923 $1,977.00 11-05924 $1,885.00 11-05925 $2,128.00 Price $159.95 $155.95 $155.95 $123.95 $255.95 $247.95 $102.95 $1,098.00 $1,592.00 $68.50 $49.00
*Mic jack feature not available on 406 MHz ELTs FAA TSOd approved, EASA ETSOd approved, 406 MHz ELT Emergency Locator Transmitter Types (AF) Automatic Fixed, & (AP) Automatic Portable. It transmits aircraft position data, immediately and accurately, on triple (406 Satellite /243 Military /121.5 Civilian) MHz frequencies. Having triple frequencies insures your distress message reaches both NOAA Satellite Operation and US Air Force AFSR Ground Operation, Search and Rescue Team, with 100% fully confidence, due to transmitting on both 243.0 MHz Military and 121.5 MHz Civilian bands, for immediate ground search dispatch. Package Includes: * AK-451 w/ Battery (AF/AP ELT) * Portable Antenna * Whip, Rod, or Blade Antenna * Remote Switch * Prefabricated 25 Foot Wiring Harness Assembly * Audible Buzzer Monitor * Six Foot Coaxial Cable Assembly * Mounting Tray * Velcro Holder * Portable Soft Case
ELTS PROGRAMMED FOR US REGISTERED AIRCRAFT Model No. Description Part No. Price AK-451-2 ELT W/ Whip and Port Antenna. 11-06677 $699.00 AK-451-2D AK451ELT Dual w/Whip & Port Antenna 11-10472 $579.00 AK451ELT W/Whip & Port Antenna W/GPS AK-451-23 11-08304 $1,183.00 interface. AK-451-3 ELT W/ Rod 3 and Port Antenna. 11-06678 $1,294.00 AK-451-4 ELT W/ Rod 4 and Port Antenna. 11-06758 $1,475.00 AK-451-5 ELT W/ Blade and Port Antenna. 11-06679 $1,799.00 AK-451-6 ELT 406/GPS/NAV POS/Whip and Port Ant. 11-06680 $1,950.00 AK-451-12 ELT w/ Multi Axes G Switch for Hel. & Dual Ant. 11-06691 $1,466.00 AK-451-13 ELT Set w/GPS & Opt Multi Axes 11-06692 $2,857.00 AK-451-14 ELT Set 406 Rod/Port Ant./Helicopter 11-06970 $1,349.00 AK-451-15 EL Set 406 for Helicopter 11-06969 $1,203.00 AK-451-16 ELT Set/Helicopter/Opt Multi Axes 11-06971 $1,609.00 AK-451-17 ELT Set/Helicopter/GPS/NAV POS 11-06972 $2,658.00 AK-451-18 ELT Set 406/GPS/NAV POS/Helicopter 11-06973 $3,038.00 INTERNATIONAL PROGRAMMED ELTS - Can be programmed for international registered aircraft (specify when ordering). Model No. Description Part No. Price AK-451-CAN ELT W/ Whip and Port Antenna. Canadian 11-06966 $719.00 AK-451-23 ELT W/ Whip Antenna & GPS Interface. for 11-08667 $1,183.00 CAN Canada registered aircraft. AK-451-INT ELT with Whip and Port Antenna. Int. 11-06968 $699.00 AK-451-INT AK-451 2D ELT Dual Freq/Whip Antenna 11-10573 $579.00 AK-451-INT ELT with Rod 3 hole antenna 11-07563 $1,279.00 AK-451-INT ELT with Rod 4 hole antenna 11-07566 $1,475.00 AK-451-INT ELT with Blade antenna 11-07568 $1,825.00 AK-451ELT with Whip antenna heli. 11-07560 $1,466.00 HELI AK-451ELT with GPS/NAV antenna whip 11-07569 $2,145.00 GPS AK-451-GPSELT with GPS/NAV antenna rod 3 hole AK-451-GPSELT with GPS/NAV antenna rod 4 hole AK-451-GPSELT with GPS/NAV antenna blade 11-07570 $2,579.00 11-07571 $2,795.00 11-07572 $3,115.00
Accessories Part No. 5 year lithium battery pack for any of EBCs 406 ELTs 11-05926 Mounting bracket for EBC 406AP series ELTs 11-05927 Mounting bracket for EBC 406HM, APM and APHM 11-05928 Mounting bracket for EBC 406AF series ELTs 11-05929 Remote Control Monitor for EBC 406AF series ELTs with 11-05930 RCM-1 connector kit External whip antenna for both EBC 406AP and AF se11-05931 ANT-406W ries ELTs. Two frequencies Survival tape antenna for all EBC 406 ELTs. Three fre11-05932 ANT-406T quencies. External rod antenna for helicopter or high speed use. For 11-05933 ANT-406R use with three frequencies 406 ELTs. ANT-406B Blade antenna for high speed use. Three frequencies 11-05934 CB-1 6ft. cable between ELT and antenna 11-05935 Manual Operation and Installation Manuals 11-05936
ACOSPAS-SARSAT & FCC approved, 406 MHz Satellite PELT Personal Emergency Locator Transmitter, triple (406 Satellite /243 Military /121.5 Civilian) MHz frequencies. Having triple frequencies insures your distress message reaches both NOAA Satellite Operation and US Air Force AFSR Ground Operation, Search and Rescue Team, with 100% confidence, due to transmitting on both 243.0 Military and 121.5 Civilian bands, for immediate ground search dispatch, narrowing the searching time to the minimum. The Position accuracy of the 406 MHz satellite signal is about 110 meters at 9.5 degree Cross Track Angle (found in Satellite Qualitative Test at a COSPAS-SARSAT approved Laboratory). Features: Applicable to all Aviation Uses such as Flying, Gliding, etc. Harsh/ Robust/ Heavy Duty PELT in an enduring composite Emergency Carrying Case. Ultra long lasting Battery Package, up to 78 hours @ -20 deg C, end of life, 10 years useful life time Lithium type, LiMnO2, 4 D-Size. P/N 11-06305 .................... $465.00
ACCESSORIES Part No. Installation Adapter Kit 11-06988 AK-451 ELT Replacement Battery 11-06686 ELT ID Software Reader 11-06974 Optional Mil Spec Remote wiring harness Assembly, 25 11-06760 Whip Ant., General Aviation, 250 knots, 406/121.5MHZ 11-06690 Rod4, Business Jet, 350 knots, 406/243/121.5 MHZ. 11-06761 Btty Pack Lithium, LIS02, 4D Cells, 87 Hrs Lasting, 5 Year Life 11-06685 Rod3, Business Jet aircraft, 350 knots, 406/243/121.5 MHz 11-06689 AK-451 Mount Tray 11-09966 AK-451 Audio Buzzer 11-09967 AK-451 T Adapter 11-09968 AK-451 Hex Key Tool 11-09969
Price $13.50 $144.95 $341.95 $49.50 $125.95 $884.00 $29.50 $488.00 $24.00 $37.50 $6.75 $1.34
617
ELTS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
KANNAD 406 AF-COMPACT ELT KIT - Designed for all light
aircraft requiring a very compact automatic fixed ELT that is fully FAA TSO-C126 approved. The robust and reliable shock sensor will automatically activate the ELT in the event of a crash, the pilot can also manually activate the ELT in case of emergency. Features: * Ultra small size and light weight ideal for any general aviation aircraft. * Six year lithium manganese battery. * Complete kit with install manual.. * Two frequency transmitter (121.5 / 406 MHz) * Weight ( Including batteries): 1.87 lbs With Rod W/ Whip Price Price Antenna Antenna USA 11-05786 $812.00 11-09525 $1,045.00 11-09526 $1,204.00 Canada 11-05786 $812.00 11-09670 $1,045.00 11-09671 $1,204.00 International 11-06314 $811.00 11-09527 $1,045.00 11-09528 $1,204.00 ELT Only Price
Weighing in at just 1.873lb and measuring just 6.89 x 3.90 x 3.40 inches the INTEGRA boasts a number of new and innovative features in a very small easy to install package. The INTEGRA transmits on both the international 406MHz satellite search and rescue system and on 121.5MHz for local direction finding. The minimum operating temperature of the unit is -20C. The internal battery life of the INTEGRA is 6 years. 406 ELT AF U.S. ...................................P/N 11-09325 ...............$896.00 406 ELT AFH (Heli.) U.S. ......................P/N 11-09327 ...............$935.00
KANNAD ANTENNAS
KANNAD ACCESSORIES
618
ELTS
The Artex ME-406 is a single output ELT. Two emergency frequencies (121.5 and 406.028 MHz) utilize the same RF output, requiring only one coax cable to connect to the new series of Artex single input antennas. The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 MHz. Every 50 seconds for 440 milliseconds the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system.The mounting hardware for the ME-406 Series is compatible with all previous models of Artex 406 MHz, as well as the ELT200 Series, ACK, Pointer Model 3000 ELT and Narco ELTs. Current owners of Artex 2-frequency ELT can re-use the remote switch in the cockpit as well as the wiring harness from the cockpit to the ELT thus greatly reducing installation costs.
USA PROGRAMMED ELTS Part No. Description Price 11-03492 Artex ME406 ELT w/ whip antenna. $939.00 11-03493 Artex ME406 ELT w/ rod antenna. $1,489.00 INTERNATIONAL PROGRAMMED ELTS Artex No. Part No. Description Price Artex ME406 ELT w/ whip antenna. Can be ME406 11-04652 programmed for international registered aircraft $939.00 (Specify when ordering). Artex ME406 ELT w/ rod antenna. Can be ME406 11-06370 programmed for international registered air- $1,495.00 craft (Specify when ordering). ACCESSORIES Description Part No. Price Artex ME406 whip antenna 11-06978 $218.95 Artex ME 406 Rod Antenna 11-08597 $739.00 5-Conductor AWG 22 Shielded Wiring for ELT to Remote 11-06580 $2.10 Switch Installation. Recommended by Artex. Artex ME406 Replacement Battery Kit 11-05277 $147.95 Artex ME406 Mounting Tray 11-07191 $27.95 Artex NAV Remote Switch Kit 11-08542 $59.95 Artex No. ME406 ME406
The Artex ME-406 HM is a single output ELT. Two emergency frequencies (121.5 and 406.028 MHz) utilize the same RF output, requiring only one coax cable to connect to the new series of Artex single input antennas. The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 MHz. Every 50 seconds for 440 milliseconds the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system.The mounting hardware for the ME-406 Series is compatible with all previous models of Artex 406 MHz, as well as the ELT200 Series, ACK, Pointer Model 3000 ELT and Narco ELTs. Current owners of Artex 2-frequency ELT can re-use the remote switch in the cockpit as well as the wiring harness from the cockpit to the ELT thus greatly reducing installation costs.
USA PROGRAMMED ELTS Artex No. Part No. Description ME406 HM 11-04966 Artex ME406 HM ELT w/ rod antenna. INTERNATIONAL PROGRAMMED ELTS Artex No. Part No. Description Artex MA406 HM ELT w/ rod antenna. Can ME406 HM 11-05670 be programmed for international registered aircraft (specify when ordering). ACCESSORIES Description Part No. 5-Conductor AWG 22 Shielded Wiring for ELT to Remote 11-06580 Switch Installation. Recommended by Artex. Artex ME406 replacement battery kit 11-05277 Price $1,949.00 Price $1,998.00
Emerging Lifesaving Technologies has presented the first ELT with internal GPS approved for General Aviation. Along with the 406MHz emergency signal, Copas/ Sarsat satellites will read your specific GPS location during a crash. The GPS automatically updates every 15 seconds and upon activation bursts a 5 watt signal within 25 meters every 50 seconds to the Global Satellite System. Search and Rescue will be notified of your location within minutes. The ELT406GPS mounts with most standard ELT configurations from previous manufacturers. GPS data comes from the internal module in the ELT- 406GPS. There is no need to install expensive interface modules and retrieve GPS information from existing systems. The antenna houses both 406 MHz and GPS passive antenna in a sleek blade configuration. A replaceable 5 year battery pack is easily installed by the owner/operator. With American Ingenuity and American Engineering, Emerging Lifesaving Technologies is committed to keeping all of their products Made in the U.S.A. Specifications: Output Power: 5W (440ms/50sec) for 72 hours @ -20C to +50C. GPS Cycle Time: Every 15 seconds. Battery: 5-Year Lithium (LiMn02). Weight: ELT Transmitter - 2.5 lbs Mounting Tray - 0.3 lbs. Total Weight: 2.8 lbs. Dimensions: 7.715 L x 3.660 H x 4.200 In the Box: 406 ELT Mouting Tray Antenna 406/GPS Remote Switch 6 Feet of GPS coax cable BNC 6 Feet of 406 coax cable SMA ELT and antenna install kit Description Part No. Price E.L.T. 406 with internal GPS USA 11-08053 $1,199.00 E.L.T. 406 with internalL GPS International 11-08456 $1,199.00 E.L.T. 406 Helicopter 6G with internal GPS USA 11-08150 $1,499.00 E.L.T. 406 Helicopter 6G w/ internal GPS Intl. 11-08457 $1,499.00 Accessories Part No. Price 8-Conductor Shilded Wire, 22 Gauge 11-09782 $2.70 E.L.T. 406 ELT Battery Pack 11-08152 $212.50 Universal Mounting Tray 11-08153 $63.75 9 whip antenna 11-08154 $84.15 406 GPS Dual Mid Speed Antenna. 250 KTAS 11-08155 $339.15 at 35k feet 406 GPS Dual High Speed Antenna. 600 KTAS 11-08156 $594.15 at 50K feet Remote switch with Aural Alert 11-08164 $84.15 406 Coaxial Cable BNC to BNC 11-08161 $58.65 GPS Coaxial Cable SMA to SMA 11-08160 $33.15 Antenna Install Kit: Mounting Template, 8 Wash- 11-08163 $18.50 ers, 8 nuts ELT Install Kit 11-08162 $63.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This product allows an upgrade to an Artex 5-Wire 406 MHz ELT using an existing 2-wire configuration. The 2-Wire Remote Interface allows two wires from the existing wiring harness to connect the cockpit remote switch to the ELT for simplified, cost-efficient installation. P/N 11-07776 .................. $396.00
Uses the proven technology of the ME406 and attaching a removable wrap-around auxilliary flex antenna. Allows the disconnection of the ELT from the installed aerial antenna, removal of the transmitter from a downed aircraft and after attaching the flexible antenna the distress call is again transmitted with full signal strength. Although Search and Rescue authoritiese recommend to remain in close proximity to the aircraft, using the ME406/P in its portable version enables to wait for the Search and Rescue crews in areas sheltered better from the environment. USA Programmed .......................................P/N 11-05671 .....$2,249.00 International Programed ..............................P/N 11-06985 .....$2,249.00 Operates on the latest SAR frequency of 406.025 MHz & 121.5 243 MHz. Ready to connect to the Artex ELT NAV interface. Includes ELT transmitter, LiMnO2 5-year battery pack, mounting bracket, remote switch, horn/buzzer, coax cables, high speed blade antenna, installation hardware, and installation and operation manual. The C406-1 is approved for aircraft operating speeds up to Mach 1, and C406-2 is approved for speeds up to 350 knots. COSPAS/SARSAT, FAA TSO C126 & JTSO2C126 Approved. C406-1 ELT with 110-340 Blade Ant. U.S. ...P/N 11-02984 ... $3,833.00 C406-1 ELT with 110-340 Blade Ant. Intl......P/N 11-09320 ... $3,833.00 CC2 ELT with Rod Antenna ..........................P/N 11-02985 ... $3,281.00
Monitors 406 ELTs in real time, displays and decodes messages, measures and displays RSSI (receiver signal strength), and displays distance to beacon. Automatically receives all past, present, and future Cospas Sarsat channels with -125 dBm sensitivity (software adjustable sensitivity). Automatically maps the location of the decoded GNSS location data into Google Earth for easy viewing and access to a detailed geographical interface Data is XML formatted for use in database applications. Can send alerts via email and/or SMS text messaging. Capable of logging data with a time stamp. Connects to user PCs with a USB cable or Ethernet interface which allows for remote management and diagnostics; power is supplied through connection to a PC USB port or an AC adapter. Multiple units can be connected together for a wider range of coverage. Rugged aluminum design can sit on a desk or be mounted on a wall. Includes USB cable (2 meter length), AC to USB adapter, ethernet cable (2 meter length), molded 406 MHz monopole antenna, GPS active antenna (5 m cable length), certificate of calibration, operators manual, and user interface software. Optional components: high performance outdoor antenna P/N 11-10473 ............... $4,495.00
619
AQUALINK PLB
The SARLink is light in weight and small enough to be easily carried in a pack or pocket by pilots, hikers, hunters, kayakers, climbers, skiers, snowmobilers or any other outdoor enthusiast. Performing a full functional self test of the PLBs internal circuitry, battery voltage & power, and 406 MHz transmission gives you peace of mind knowing your PLB will work the moment you need it most. ACR Exclusive: Built-in GPS acquisition test mode allows you to test GPS functionality up to 12 times over the life of the battery. Tap in to the same field-tested rescue technology used by the U.S. Military, U.S. Coast Guard, NATO Special Forces and Arctic explorers. Internal 66 channel gps. High intensity strobe light. Non hazmat battery. Typical performance 35 hours. Mounting holster included Limited 5 year manufacturer warranty. Not approved for use in australia & new zealand USA ........................... P/N 11-08057 ...............$369.00 Canada...................... P/N 11-10402 ...............$409.00 Broadcasts a unique registered distress signal that not only tells rescuers where you are, but who you are. The onboard GPS can fix your position to within 100 meters and then utilizes a powerful 406 MHz signal to relay your distress call to orbiting SAR satellites. As local Search and Rescue is deployed, a separate homing signal and integrated LED strobe light guide rescuers to your location. Size: 2.25 x 5.88 x 1.29 (5.72 x 14.94 x 3.28 cm) Weight: 8.9 oz (258g) with lanyard Waterproof: 16.40ft (5 m) @ 1 hr., 33 ft (10 m) @ 10 min. USA ......................... P/N 11-08339 ...............$495.00 Canada.................... P/N 11-10403 ...............$495.00
Get Found FAST with a PLB as small as a mobile telephone. Fits easily into backpacks, on lifejackets...put it just about anywhere, and get found anywhere in the world! No subscription fees are required, and weighs just 5.3 oz. * Haz-Mat: Non-hazardous Shipping: Air or ground. **NOT APPROVED FOR USE IN AUSTRALIA & NEW ZEALAND** P/N 11-07323.............$249.00 Features a built-in GPS receiver combined with a 406 MHz transmitter and 121.5 MHz homing signal. In the event of an emergency, an alert signal is transmitted to COSPAS-SARSAT satellites and forwarded to a rescue coordination center within typically 3 minutes. **NOT APPROVED FOR USE IN AUSTRALIA & NEW ZEALAND** P/N 11-02256.............$563.00
Minimum of 48 hours continuous operation. Compact, light weight, small size. Easy and intuitive activation. Waterproof to 10 meters and buoyant Subscription-free and no call charges. 5 year battery life User replaceable battery 406 MHz international messaging & 121.5 MHz homing signal P/N 11-08711 ................2.95
New Enhancements: Enhanced GPS Extra Message Button Tracking message queuing Safety flaps over 911 and help message Replaceable button cover (see left) Illuminated buttons Intrinsically safe Sent message light Case included (see below) Enviromentally safe packaging Features: Check In: Lets contacts know where you are and that youre okay. Track: Acquires your GPS location every 10 minutes for 24 hours. Alert SOS: Alert emergency assistance request with your exact location to GEOS every 5 min up to 4.7 days. Ask For Help: Request help from friends and family every 5 min for 1 hour. Up to 10 contacts phone & email. Removable Case: Arm Band, Carabiner & Car Dash attachment. Spot 2 Orange ............................... P/N 11-07878 .......................$169.99
The distress signal is relayed by the Cospas-Sarsat LEOSAR satellites to the ground stations (LUT) that calculate its position thanks to the Doppler Effect. With a built-in GPS, the GEOSAR satellites receive the signal and position within 5 minutes. The ground breaking new XS-4 GPS Personal Locator Beacon is a compact and versatile 406 MHz emergency location beacon. The XS-4 GPS transmits two signals simultaneously, one to the subscription free Global 406 MHz international Search And Rescue (SAR) satellite system. The other (121.5 MHz) is a homing signal designed to speed up the local recovery response process. Once activated, the signals will continue to transmit for at least 24 hours. The powerful 406 MHz 5 watt output transmission ensures that a call for help gets through to the international SAR authorities whatever the conditions. This PLB is programmed for USA residents for worldwide use. Cannot be registered for customers outside the USA XS-4 GPS PLB For U.S. ..................... P/N 11-08468 ..................$269.95 XS-4 GPS PLB For Canada ............... P/N 11-09324 ..................$297.95
Using state-of-the-art satellite technology, SPOT HUG monitors a virtual security perimeter around your boat. SPOT HUG will instantly alert the appropriate parties even from remote areas beyond cellular coverage. 100% satellite-based for maximum coverage. Unauthorized Movement alert notification to Asset Monitoring Center Receive Daily Status update message with boats location and any sensor notifications Sensor Alert monitoring and notification for bilge, engine and battery monitoring. Configure up to 4 monitoring sensors. Key FOB for easy wireless activation. Wireless Keypad security and messaging system. Uses battery power or direct line power. Easy to install. P/N 11-09611.............$399.95 Simply pair your smartphone with SPOT Connect, and get connected to a global satellite network that lets you send messages and GPS coordinates from virtually anywhere on the planet. Update Twitter and Facebook. Send email and text messages. Request non-emergency help from professional service providers. And in the case of a critical emergency, send an SOS message requesting emergency assistance. P/N 11-09612.............$149.95
SPOT HUG
SPOT CONNECT
620
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
With a range of feature previously unavailable in general aviation, the Shadin Avionics AMS-2000 Altitude Management and Alert System brings advanced instrumentation to new levels of function and affordability. The Shadin Avionics AMS-2000 uses information from Mode-C altitude encoder to deliver: Time-based Altitude Alerting, rather than fixed altitude buffers. Automatic calculation and display of Density Altitude. Real-time display of IVS without the inherent lag of your aircrafts static system. Calculation and display of Aircraft and Engine Performance Percentage, at your demand. These are but a few of the Standard features that are make the AMS2000 the best value in advanced altitude monitoring instrumentation: 8 FAA approved. TSO C88a, DO-160B. An appropriate audio and visual warning broadcast upon deviation outside a user-selected envelope surrounding your assigned altitude. Smooth capture of your cruise altitude is facilitated by a level-off warning sounded and displayed at a userdefined distance from target altitude. Alerts you just above your preselected Decision Height or MDA. Gear-down reminder. Displays density altitude and aircraft/engine performance percentage. Digital display of altitude from -1000 to +62,000 feet in 100 foot increments. Adjustable audio alert tone and level. Compatible with most Mode-C transponders in current production. Standard rectangular 1/2 ATI configuration. Made in the U.S.A., the AMS-2000 features a 12-month warranty. The AMS-2000 coupled with the Falcon Altitude Encoder provides all advanced altitude alert functions previously noted, plus the following high-resolution altitude management functions: Time-based level-off warning sounded and displayed 15 seconds from target altitude--smooth capture is assured regardless of climb or descent rate. Digital display of altitude from -1000 to +62,000 feet in high resolution, 10-foot increments. Digital reading of Instantaneous Vertical Speed (IVS). Deviation envelope is adjustable in 10 foot increments P/N 10-03711 ..... $1,964.00 Falcon Altitude Encoder ..............................P/N 11-12035 ..... $1,323.00
Spidertracks is the affordable, satellite-based flight tracking system designed specifically for aviation to bring peace of mind to pilots and their families. With a portable spider unit on board, the pilots friends can follow the flight in real time on-line so they know the pilot is safe, and so they can share the fun of flying on-line. Automatic alerting and simple messaging mean the pilot can tell those they trust that they are safe or when they need help. The SOS is sent automatically as soon as the system loses contact with the aircraft, so help can be dispatched quickly when needed. Features: Streamlined design, Integrated keypad, Simple to use, Compatible with Aviator & Fleetpro websites, Global coverage in real time, Portable, Mark button text and email messaging, Automatic SOS alerting with Spiderwatch active tracking service, Manual SOS, Manual or automatic activation of Spiderwatch, Type certification not required, AFF compliant. Specifications: Dimensions: 3.5 x 4.7 x 1.0 (89mm x 119mm x 25mm), Weight: .35lb, Power Consumption: Operating <100mA at 12 V DC with reverse polarity protection., Operating Temp: -13 - +158 F, Frequency: L1, 1575 MHz, Channels: <- 50, Position accuracy: within 8., Operating parameters: 59,000. Speed limit of 500 KNTs. Power Source: Vehicle auxiliary power. The cigratte lighter plug supplied can be hard wired by a LAME. P/N 11-09789.......... $995.00
Todays modern avionics integrate many functions with your GPS, but standard installations leave many important features untapped. The TAS 1000 MultiFunction Data Source was specifically designed to supply all the information needed to fill in the missing pieces of your GPS or MFD display in real-time. TAS 1000 provides the pilot with a wealth of useful information all based on real time measurements of airspeed, altitude, temperature, fuel flow, heading, ground speed and track. Designed to interface with many brands of GPS, TAS 1000 unlock many previously hidden data pages in most GPS navigators, In addition to TAS 1000s in flight advisory function, TAS 1000 can also serve as a backup altimeter, airspeed indicator or fuel flow meter. The TAS 1000 is designed for use in any piston, turboprop, or jet aircraft and provides a full compliment of features when interfaced to a slaved compass system or HSI, fuel transducers, and compatible GPS system. TAS 1000 will deliver a useful subset of features even if all the interfaces are not available. The Windicator is an integral part of the TAS1000 system. It presents a previously unavailable graphical display of the winds aloft in real time. The Windicator information alone is so useful that it makes the TAS 1000 installation worthwhile. TAS 1000 system options include an altitude encoder to provide altitude information to a transponder or GPS unit as well as alerting the pilot with overspeed, altitude, approach & altitude difference alerts. MUST BE DEALER INSTALLED. Part No. Insight No. Description Price TAS1000 Sys. for Piston Engine 11-00626 1000-001-P Aircraft (Incl. 1 Windicator) 18,000ft. $2,850.00 Alt- 250kt max. TAS1000 for turbo-charged Piston & 11-00627 1000-001-T Turboprop aircraft (Incl.1 Windicator) $4,275.00 55,000ft. Alt-500kt max. 11-00628 1000-002 Windicator (replacement) $795.00 Expansion Module (Alt. encoder, 11-00629 1000-003 $495.00 Alt. Serializer, & Overspeed warn.) Fuel Injection - Fuel flow smart sensors for Piston Engine aircraft 11-00630 1000-004-1 Spine Mount, 201, Fuel Injected $477.95 11-10414 1000-004-4 Spine Mount, 231, Gravity Fed $515.95 11-10412 1000-004-2 Firewall Mount, 201, Fuel Injected $477.95 11-10415 1000-004-5 Firewall Mount, 231, Gravity Fed $515.95 11-10413 1000-004-3 Inline Mount, 201, Fuel Injected $477.95 11-10416 1000-004-6 Inline Mount, 231, Gravity Fed $515.95
The KFD 840 integrated Primary Flight Display (PFD) stands at the forefront of the new Apex Edge Series from Bendix/ King by Honeywell. Its combination of the latest technology, size, affordability and full functionality make it unique in general aviation. Large 8.4" diagonal LCD display with high resolution and excellent sunlight readabilitybut is sized for easy installation in existing piston engine cockpits. A self-sufficient unit with an embedded Air Data module and MEMS Attitude and Heading Reference System (ADAHRS). Features: Full width horizon ADI Easy-to-read vertical tapes for altitude and airspeed Large 8.4" diagonal display Separate course and heading knobs Integrated ADAHRS Customizable checklist page Optional battery backup. Specifications: Size: 8.5" W x 7" H x 7.3" D Weight: < 8 lbs Screen Diagonal/Display Size: 8.4" Active Matrix LCD Power: 11-33 VDC Resolution: 640 W x 480 W (307, 200 Pixels) CERTIFICATION: DO-178B, Level C; DO-160E; Fully TSOd INTERFACES: Full set of analog and digital interfaces to work with the more popular autopilot systems; KX-155/165 compatible analog interfaces, plus a full set of ARINC;429 and RS-232 interfaces to work with the popular digital NAV and GPS systems; Additional available digital interfaces to support future growth. This unit is install only. P/N 11-08469 ........................................$11,995.00 + Installation
621
DYNON
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Dynons EFIS-D10A is a full-featured Electronic Flight Information System in a small package. This instrument fits into a standard 3-1/8 panel hole, making it an ideal candidate for replacing vacuum and electric attitude indicators. In addition to a full complement of flight instruments, the EFIS-D10A also has a built-in HSI and autopilot capability. EFIS-D10A features and options: Sunlight-readable, 4 color display with full dimming control Attitude Indicator, Heading, Altimeter, ASI, VSI, Turn Coordinator / Slip/Skid Ball, HSI, OAT, TAS, Angle of Attack, Voltmeter Altitude encoder output Dual-axis autopilot Backup battery 25 User-defined checklists Dynon three-year factory limited warranty EFIS-D10A Instrument (with out battery) .................. P/N 10-00844 ...........$2,150.00
DYNON EFIS-D10A
EFIS-D10A OPTIONS
Description Internal Li-Ion Backup Battery Remote Compass (EDC-D10A) OAT Probe (requires EDC-D10A) D10 Flush Mount Bracket Optional AP74 Vertical Optional AP74 Horizontal Part No. 10-00755 10-01046 10-01823 10-00757 10-03565 10-03566 Price $129.95 $99.95 $66.75 $19.95 $450.00 $449.00 Description AOA/Pitot Probe (unheated) Wiring Harness Encoder Converter Module (serial to parallel convertor for gray code transponders) USB-Serial Converter Roll Servo Kit RV10 Part No. 10-01157 10-01158 10-01159 10-01824 10-04076 Price $196.50 $79.50 $79.85 $21.50 $795.00
Dynons EFIS-D100 includes all of the instruments and features of the EFIS-D10A, but on a brilliant 7 widescreen display with full dimming control. The larger size allows for multiple information pages to be displayed side-by-side in a split-screen format, enabling you to have full PFD while also displaying HSI, timers, or engine monitoring information from your Dynon EMS. Additionally, the EFIS-D100 is available in an optional Super-Bright Screen format, improving its readability and overall performance in all light conditions. Dimensions: 6.95 W x 4.90 H x 4.51 D Includes Dynon three-year factory limited warranty EFIS-D100 System (includes remote compass, mounting tray & USB-serial converter.....................................................P/N 10-01705 ........$2,487.00 EFIS-D100 System with Super Bright Screen.....................................................................................................................P/N 10-02155 ........$2,495.00
DYNON EFIS-D100
EFIS-D100 OPTIONS
Description Internal Li-Ion Backup Battery OAT Probe AOA/Pitot Probe (unheated) Roll Servo Kit RV10 Part No. Price 10-00755 $129.95 10-01823 $66.75 10-01157 $196.50 10-04076 $795.00 Description Part No. Wiring Harness 10-01158 Encoder Converter Module (serial to parallel con10-01159 verter for gray code transponders) Price $79.50 $79.85
Because some like to keep it simple, Dynon offers the EFIS-D6 and EFIS-D60 as basic, even more affordable Electronic Flight Information System (EFIS) solutions. Perfect for pilots who want to save panel weight, space, and installation time compared to a conventional analog gauges, the EFIS-D6 and EFIS-D60 feature all the amenities of a traditional six-pack while also adding a voltmeter and altitude encoder. The EFIS-D6 fits into a standard 3-1/8 panel hole, making it an ideal candidate for replacing vacuum and electric attitude indicators. The EFIS-D60 maintains the same profile and 7 screen as the EFIS-D100, and is available in the Super-Bright screen version only. EFIS-D6 / EFIS-D60 features and options: Sunlight-readable, color display with full dimming control Attitude Indicator, Heading, Altimeter, ASI, VSI, Turn Coordinator / Slip/Skid Ball, Angle of Attack, Voltmeter Altitude encoder output Backup battery Dynon three-year factory limited warranty. Accessories Part No. Price Description EFIS-D6 EFIS-D60 With Super Bright Screen EFIS Wiring Harness Part No. 10-03865 10-03866 10-01158 Price $1,549.00 $1,845.00 $79.50 EFIS/FLDEK Wiring Harness EFIS Backup Battery D180 D100 D60 OAT Probe D180 D100 D60 D10A D6 Flush Mount Bracket D10A D10 D6 10-01158 10-00755 10-01823 10-00757 $79.50 $129.95 $66.75 $19.95
The HS34 HSI Expansion Module was designed to enhance the capability of Dynons best-selling EFIS products. The panel-mounted HS34 not only expands the HSI functionality of your EFIS-D10A, EFIS-D100, or FlightDEK-D180, but also enables several new features for any Dynon instrument to which it is networked: Allows Dynon EFIS to interface with multiple radios and GPS devices simultaneously Includes multiple interfaces to accommodate analog, ARINC-429 and RS-232 inputs Accepts signals from marker beacon receivers and DME devices Backlit to facilitate night flight conditions Designated control knobs for adjusting Heading, Course (OBS), or general purpose values such as barometer. Designated NAV and Bearing Source selection buttons Simple 2-wire connection to Dynon EFIS instruments. Dimensions: 1.639 W 4.903 H 4.951 D Dynon three-year factory limited warranty Dynon HS34 HSI Expansion Model - Vertical ...................P/N 10-02590 ................$645.00 Dynon HS34 HSI Expansion Model - Horizontal ...............P/N 10-02773 ................$646.00
622
DYNON
The Dynon EMS-D10 offers more engine information in less space then ever before full engine monitoring with up to 27 separate inputs on a highly readable 4 display, installed in your standard 3-1/8 panel hole. A designated Fuel Computer page allows the pilot to see fuel levels for up to 4 tanks, fuel pressure, fuel flow, fuel used, fuel remaining, time remaining and fuel required to destination all on one optimized display. To keep the classic look and feel of the Dynon product family, the EMS-D10 utilizes the same highly-visible display, keypad, and bezel as the best-selling EFIS-D10A and will provide engine information to your Dynon EFIS through a simple 2-wire connection. As an added safety feature, the EMS-D10 also features programmable alarms which can be displayed on screen, through a separately mounted indicator light, or by an audible annunciation through your intercom. EMS-D10 features and options: Sunlight-readable, 4 color display with full dimming control Replaces up to 16 different types of gauges Individual displays for up to 6 EGT and 6 CHT inputs Customizable displays for Tachometer, Fuel Pressure, Oil Pressure, Oil Temp, Manifold Pressure, Volts/Amps, Carb Temp, OAT, Coolant Temp /Pressure, Hobbs/Tach Time Fuel level display for up to 4 tanks Fuel flow measurement with fuel computer display Customizable settings for Green/Yellow/Red parameters on all inputs Inputs for flaps/trim position sensors and contacts Programmable visual and audio alarms 25 User-defined checklists Dynon three-year factory limited warranty P/N 10-01160 ...............$1,665.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
EMS OPTIONS
Description Capacitance to Volt Converter Fuel Flow Sensor USB-Serial Converter D10 Flush Mount Bracket EGT Thermcouple Ext Wire CHT Thermcouple Ext Wire Part No. 10-02159 10-01165 10-01824 10-00757 10-01167 10-01168 Price $49.95 $148.00 $21.50 $19.95 $0.99 $0.99
Featuring all of the same inputs and features of the EMS-D10, the Dynon EMS-D120 brings full engine monitoring to your panel on a stunning 7 wide-screen display. The larger size allows for multiple information pages to be displayed side-by-side in a split-screen format, enabling you to have full view of your primary engine inputs while also viewing your fuel computer, engine timers, or flight information from a Dynon EFIS. Additionally, the EMS-D120 is available in an optional Super-Bright Screen format, improving its readability and overall performance in all light conditions. Dimensions: 6.95 W x 4.90 H x 4.51 D Includes Dynon three-year factory limited warranty EMS-D120 System (no engine sensors or wiring harnesses) .......... P/N 10-01825 .......... $1,859.00 SENSOR INPUTS EMS-D120 w/ Superbright Screen .................... P/N 10-02156 .......... $2,129.00 6 - EGT (Type K Thermocouple)
6 - CHT (Type J Thermocouple) 2 - Fuel Level (Resistive [0-1 K ohm] or Capacitance [0-5 volt]) 2 - RPM (Frequency)2 - Contacts 1 - Manifold Pressure (Voltage) 1 - Oil Temperature (Resistive) 1 - Oil Pressure (Resistive) 1 - Fuel Pressure (Resistive) 1 - Fuel Flow (Frequency) 1 - Amps (Shunt) 1 - Volts 1 - Turbine Inlet Temperature (Type K Thermocouple) 3 - General Purpose (Either resistive or voltage for OAT, Fuel Tanks 3 & 4, Coolant Temp/Press, Carb Temp)
EMS OPTIONS
Description Capacitance to Voltage Converter Fuel Flow Sensor USB-Serial Converter EGT Thermcouple Ext Wire CHT Thermcouple Ext Wire Part No. 10-02159 10-01165 10-01824 10-01167 10-01168 Price $49.95 $148.00 $21.50 $0.99 $0.99
The FlightDEK-D180 combines Dynons best-selling EFIS and EMS (Engine Monitor System) instruments into one brilliant 7 sunlight readable display, giving you an unparalleled assortment of functions in one easy-to-use, very powerful instrument. Pilots may elect to display both EFIS and engine monitor functions simultaneously in split-screen format or switch over to a full screen EFIS or EMS via simple hotkey commands allowing for full monitoring of any combination of PFD, engine sensors, fuel computer, HSI, and timers. Like all other Dynon instruments, the FlightDEK-D180 comes with a 3-year warranty and free lifetime software updates. Additionally, the FlightDEK-D180 is available in an optional Super-Bright Screen format, improving its readability and overall performance in all light conditions. Dimensions: 6.95 W x 4.90 H x 4.51 D Includes Dynon three-year factory limited warranty DEK-D180 w/ Superbright Screen. .......................P/N 10-02157 ................. $3,295.00
DYNON FLIGHTDEK-D180
FLIGHTDEK OPTIONS
Description Battery OAT Probe AOA/Pitot Probe (unheated) AOA/Pitot Probe (heated) Encoder Converter Module Fuel Flow Sensor EGT Thermcouple Ext Wire CHT Thermcouple Ext Wire OAT HS34 HSI Expan. Mdl. Vertical HS34 HSI Expan. Mdl.Horizontal Capacitance to Volt Converter Wiring Harness Roll Servo Kit RV10 Part No. 10-00755 10-01823 10-01157 10-02158 10-01159 10-01165 10-01167 10-01168 10-01176 10-02590 10-02773 10-02159 10-01158 10-04076 Price $129.95 $66.75 $196.50 $449.00 $79.85 $148.00 $0.99 $0.99 $36.95 $645.00 $646.00 $49.95 $79.50 $795.00
SEE WWW.AIRCRAFTSPRUCE.COM FOR LISTING OF ALL ENGINE SENSORS, HARNESSES, & PACKAGES
623
DYNON
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
PACKAGE A
Dynon FlightDEK D180 w/ Super Bright Dynon EFIS Harness Garmin SL 30 NAV/COM w/ Harness Garmin GTX 327 Transponder w/ Harness Note: D180 does not come w/ engine harness. P/N 11-07133..............$8,746.00 Dynon Avionics servos are dimensionally identical to other leading servos for drop-in upgradability. Behind the scenes, though, the SV line of servos are all-new. A lightweight aluminum case houses a stainless steel gear train to optimize weight while not sacrificing strength. The servo control arm is captured by a castellated nut and secured by a cotter pin, just like other critical interfaces in your aircraft. Each servo is managed by its own microprocessor, making the servo an active, smart extension of the autopilot. This simplifies the control-surface-toservo calibration, and prevents the servo from driving itself endlessly like other servos can. As an ultimate mechanical failsafe, a simple and effective shear pin is employed to let you break the servo free of the aircraft control surface in an emergency.
Description Part No. Price RV-6 Roll Servo + Mounting Kit (Includes Servo mounting kit RV-6 roll 10-03555 $825.00 (fuselage):101020-001, pkg SV32L (long output arm): 100854-001 RV-7/8/10 Roll Servo + Mounting Kit (Includes Servo Mounting kitRV-7/8/10 roll (R wing): 101020-003, pkg SV32 ( std. output arm): 10-03556 $795.00 100854-000 RV-9 Roll Servo + Mounting Kit (Includes Servo Mounting kit-RV-9 roll 10-03557 $795.00 (R Wing):101020-004, pkg SV32 (std. output arm): 100854-000 Description Part No. Price RV-6/7/9 Pitch Servo + Mounting Kit (Includes Servo Mounting Kit10-03559 $795.00 RV-6/7/9 Pitch: 101020-005, pkg SV32 (std. output arm): 100854-000) RV- 4/8 Pitch Servo + Mounting Kit(Includes Servo Mounting kit- RV-4/8 10-03560 $795.00 Pitch : 101020-002, pkg SV32 (std. output arm): 100854-000 RV-10 Pitch Servo + Mounting Kit: (Includes servo mounting kit RV-10 10-03893 $824.95 pitch (fuselage):101020-006, pkg SV42 (std output arm): 101058-000
SEE WWW.AIRCRAFTSPRUCE.COM FOR LISTING OF ALL ENGINE SENSORS, HARNESSES, & PACKAGES
SkyView is the latest glass-panel solution from Dynon Avionics, featuring a full PFD with synthetic vision, moving map with terrain and obstacles, engine monitor, and autopilot. Very bright, high-resolution screens with full dimming control provide excellent visibility in all conditions, while two multi-position control knobs allow easy user input. The full-color PFD features a full set of flight instruments over a highly-detailed 3D synthetic vision display, while your aircrafts position is shown on a moving map with colorcoded terrain, obstacles, and airport/airspace information. In addition, the SkyView will accommodate full engine monitor display and a dual-axis autopilot through the Skyview 7 Display Skyview 10 Display addition of optional Dynon hardware. SkyView systems come standard with Dynons three-year factory limited warranty. SkyView system features and options: 10 display screen, 1024x600 resolution and 1350 nits brightness 7 display screen, 800x480 resolution and 1200 nits brightness Synthetic Vision / 3D terrain PFD featuring Altimeter, ASI, Compass/Heading, VSI, OAT, TAS, Turn Coordinator / Slip/Skid Ball, HSI, GPS Ground Track, Angle of Attack GPS / Moving Map with color-coded terrain, obstacles, airports & airspace Engine Monitor with fullycustomizable display Dual-axis Autopilot Altitude encoder output Backup battery Convenient program and data updates via USB memory stick Unlimited future expandability including include external video display, weather data, traffic, and complete Com radio, Nav radio, and transponder control. Dimensions: 10 display: 10.32 W x 7.06 H x 2.14 D 7 display: 7.64 W x 5.51 H x 2.14 D
Description SkyView 7 Display (includes main wiring harness) SV-D700 SkyView 7 Display (Display Only) SkyView 10 Display (includes main wiring harness) SV-D1000 SkyView 10 Display (Display Only) SV-ADAHRS-200 SkyView ADAHRS - First SV-ADAHRS-200 SkyView ADAHRS - Dual & 201 SV-EMS-220 SkyView Engine Monitoring Module SV-GPS-250 SkyView GPS 5Hz Receiver Module SV-BAT-320 SkyView Backup Battery SV-HARNESSDynon Display Harness with Wiring D37 SV-MAP-270 SkyView GPS Navigation Software Enhancement SV-ETHERNETDynon Ethernet Cable 3CC 101406-000 Skyview ARINC Adapter SV-VPX-290 SkyView Vertical POwer Unlock Code Network Cable Both ends with conSV-NET-3CC nectors, 3 long SV-NET-6CC Network Cable Both ends with connectors, 6 long Model No. Part No. 10-03933 10-03935 10-03932 10-03934 10-03936 10-04018 10-03938 10-03939 10-03940 10-03941 10-04678 10-04679 10-04520 10-04810 10-03942 10-03943 Price $2,579.00 $2,465.00 $3,395.00 $3,295.00 $1,175.00 $1,941.00 $574.00 $198.50 $178.50 $93.50 $495.00 $24.95 $469.95 $266.95 $39.90 $44.00 Description Network Cable 1 end with connector, 1 end with pins only, 10 Network Cable 1 end with connector, SV-NET-15CP 1 end with pins only, 15 Network Cable 1 end with connector, SV-NET-20CP 1 end with pins only, 20 SV-NET-SPL Network Splitter Network Autopilot Servo Wiring Kit SV-NET-SERVO Includes 20 Lycoming/Superior/Continental 4 EMSKIT-L4C Cylinder, Carbureted Lycoming/Superior/Continental 6 EMSKIT-L6C Cylinder, Carbureted Lycoming/Superior/Continental 6 EMSKIT-L6F Cylinder, Fuel Injected EMSKIT-RTX Rotax 912 EMSKIT-J33 Jabiru 3300 RV10 Roll Servo Kit RV10 01411-000 SkyView XPDR M-S C-1 101412-000 SkyView XPDR M-S C-2 100403-003 Dynon EMS Fuel Flow Sensor 100654-000 Dynon Capacitance to Volt Converter 101409-000 Dynon SkyView XPDR M-S C-1 101410-000 Dynon SkyView XPDR M-S C-2 SV-NET-10CP Model No. Part No. 10-03944 10-03945 10-03946 10-03948 10-04491 10-04827 10-02306 10-04831 10-02307 10-02310 10-04076 10-04518 10-04519 10-01165 10-02159 10-04518 10-04519 Price $49.75 $54.85 $59.00 $65.00 $54.75 $698.00 $735.00 $827.00 $294.00 $550.00 $795.00 $2,099.00 $1,695.00 $148.00 $49.95 $2,099.00 $1,695.00
DYNON PACKAGES
OPTIONS
Description Add a PM 501 intercom Add PM 1200 high noise intercom Part No. 11-11800 11-01671 Price $269.95 $429.99
PACKAGE C
Dynon D100 w/ Super Bright Dynon EFIS Harness Garmin SL 30 NAV/COM w/ Harness Garmin GTX 327 Transponder w/ Harness P/N 11-07135.............$7,970.00
PACKAGE F
Dynon D100 w/ Super Bright Dynon EFIS Harness Dynon D120 w/ Super Bright Icom A210 COM Garmin GTX 327 Transponder w/ Harness Note: D120 does not come w/ engine harness. P/N 11-07138...............$7,836.00
PACKAGE D
Dynon D100 w/ Super Bright Dynon EFIS Harness Icom A210 COM Garmin GTX 327 Transponder w/ Harness P/N 11-07136...............$5,549.00
PACKAGE G
Dynon FlightDEK D180 w/ Super Bright Dynon EFIS Harness Dynon HS 34 HSI Vertical Module GNS 430W w/ Harness GTX 327 Transponder w/ Harness Note: D180 does not come w/ engine harness. P/N 11-07139..............$13,998.00
PACKAGEB
Dynon FlightDEK D180 w/ Super Bright Dynon EFIS Harness Icom A210 COM Garmin GTX 327 Transponder w/ Harness Note: D180 does not come with engine harness. P/N 11-07134..............$6,294.00
PACKAGE E
Dynon D100 w/ Super Bright Dynon EFIS Harness Dynon D120 w/ Super Bright Garmin SL 30 NAV/COM w/ Harness Garmin GTX 327 Transponder w/ Harness Note: D120 does not come w/ engine harness. P/N 11-07137...............$10,000.00
624
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The centerpiece of the EFIS Horizon is its primary flight display. Combined into 1 intuitive display is attitude, navigation and the aircrafts current state. The EFIS Horizon includes a moving map displaying all US airports and navaids, plus user created waypoints. Engine data is provided to the Horizon EFIS via the proven and well known Engine Information System products. Features include split screens, convenient controls, integrated navigation and attitude, active redundancy, continuous self-testing and a dedicated AHRS processor. All versions of the EFIS Horizon Series I, and EFIS Series I Display unit require a GPS to display GPS related data, and/or an EIS Model 4000 / 6000 / 9000 to display engine data. These items are not included, and must be purchased separately unless otherwise indicated.
SCREENS
Model MFD-WS MFD-HS MFD-HX HS-8.4 Model AHRS-1-PKG AHRS-2-PKG Model ARINC-429/P GPS-HS/INT GPS-HS/EXT GPS-RAIM-HS/INT GPS-RAIM-HS/EXT XM-WEATHER/CPU XM-WEATHER/USB USB-EXT ---Model H/ENG-LYC-4 H/ENG-LYC-6 H/ENG-CONT-4 H/ENG-CONT-6 H/ENG-912 H/ENG-J4 H/ENG-J6 Part No. 11-07476 11-07477 11-07479 11-07480 Part No. 11-09212 11-07478 Part No. 11-09213 11-09214 11-09216 11-09217 11-09218 11-09219 11-09221 11-09222 11-09783 11-09791 11-09792 Part No. 11-09242 11-09243 11-09244 11-09245 11-09246 11-09247 11-09248 Description Grand Rapids Horizon WS 6.5. Grand Rapids Horizon HS 6.5 Grand Rapids Horizon HX 6.5 Grand Rapids HS-8.4 OPTION Price $2,000.00 $2,000.00 $4,000.00 $600.00 Price $3,000.00 $4,000.00 Price $475.00 $400.00 $400.00 $750.00 $750.00 $950.00 $550.00 $15.75 $1,750.00 $850.00 $900.00 Price $1,350.00 $1,550.00 $1,350.00 $1,550.00 $975.00 $995.00 $1,195.00
OPTIONS
Description Grand Rapids Arinc 429 H OPT Grand Rapids Internal GPS OPT Grand Rapids External GPS OPT Grand Rapids INT RAIM GPS OPT Grand Rapids EXT RAIM GPS OPT Grand Rapids Weather S/HS/WS Grand Rapids Weather HX Grand Rapids USB Extention AutoPilot Servos Standard Version AutoPilot Servos Roll Servo Version AutoPilot Servos Pitch Servo Version
ENGINE PACKAGES
Description Grand Rapids 4CYL LYC Horizon Grand Rapids 6CYL LYC Horizon Grand Rapids 4 CYL CON Horizon Grand Rapids 6CYL CON Horizon Grand Rapids Rotax 912 Horizon Grand Rapids JAB 2200 Horizon Grand Rapids JAB 3300 Horizon
Add full-featured autopilot capability to any GRT EFIS. Features: Servos support all autopilot features provided by the EFIS, including: Heading select, ILS approach coupling, GPS approach coupling, Climb/Descent to selected altitude, Climb/Descent on IAS or vertical speed, Synthetic approach coupling, Automatic approach capture, VOR coupling Fail-Safe Servo Design: Clutchless - Minimizes possibility of inadvertent servo jam, Shearable Output Arm - disconnects servo mechanically in the rare case of an internal servo jam, Limited Authority - Pilot may override the servo by simply moving the control stick Safe Design Features: Servo arm retained by castle nut., Case retained with safety-wired fasteners such that the geartrain can not separate to potentially jam flight controls. Servo torque sensing provides Trim Up/Down indication to prevent unexpected loss of pitch control Unexpected disconnect or mode change generates EFIS alarm Autopilot Servos Roll Servo Version ................................................P/N 11-09791 .........................................................$850.00 Autopilot Servos Pitch Servo Version ..............................................P/N 11-09792 .........................................................$900.00 Autopilot Servos Standard Version ..................................................P/N 11-09783 ......................................................$1,750.00
625
SCREENS
(Internal AHRS included on the S200. S100 does not have an AHRS used for MFD)
Description Grand Rapids Sport EFIS 6.5 Grand Rapids Sport MFD 6.5 Grand Rapids SX-8.4 Option
Price $3,000.00 $2,000.00 $600.00 Price $600.00 $495.00 $395.00 $474.95 $950.00 $15.75 $1,750.00 $850.00 $900.00 Price $1,195.00 $1,375.00 $1,195.00 $1,375.00 $900.00 $930.00 $1,030.00
OPTIONS
Model SX-SV SX-GPSV GPS-S-INT ARNIC-429-E XM-WEATHER/ CPU USB-EXT ---Model S/ENG-LYC-4 S/ENG-LYC-6 S/ENG-CONT-4 S/ENG-CONT-6 S/ENG-912 S/ENG-J4 S/ENG-J6 Part No. 11-08484 11-09548 11-09547 11-09546 11-09219 11-09222 11-09783 11-09791 11-09792 Part No. 11-09549 11-09550 11-09551 11-09552 11-08485 11-08487 11-08488 Description SV OPT VERT A/P OPT Sport INT GPS ARINC S OPT Weather S/HS/WS USB Extension AutoPilot Servos STD. V AutoPilot Servos Roll AutoPilot Servos Pitch Description 4CYL LYC Sport 6CYL LYC Sport 4CYL CON Sport 6CYL CON Sport ROTAX 912 Sport JAB 2200 Sport JAB 3300 Sport
ENGINE PACKAGES
EFIS Integra TL-6524 is a multifunctional flight monitoring system integrating all primary flight instruments (Altimeter, Vertical Speed Indicator, Air Speed Indicator, Compass, Accelerometer, Chronometers, Turn & Bank Indicators, Angle Of Attack Indicators, IAT, OAT etc.). The EFIS Integra also combines navigation (HSI, CDI with connection to the popular Garmin SL30) and 3-D terrain for use worldwide. The wide viewing angles, brilliant colour and direct sunlight readability of the display will give you a new dimension in EFIS instrumentation. Proven, state of the art technology and components will provide you with comfortable, user-friendly control. The Integra controls are fully ambidextrous and provide functions that have previously only been dreamt of - listening to your favourite music after inserting your flash drive into the front panel USB port, 3-D visualization of terrain, integrated 3-axis autopilot, direct voice warnings into your headphones, etc. Features: * Voltage: 10.0 to 32.0 Volts * Backlights internal or external: 5V, 12V or 24V * Current consumption: 500 to 750 mA @ 14 Volts * Maximal voltage and signal current: 30 Volts, 1 Ampere * Measurement: +/-1% * Operating: -20C to 70C (-4F to 158F) temperature range * Relative humidity: 95% without condensation * Load: +/-20 g * Vibration: 1 to 200 Hz * Weight: 750 grams (0,55 lbs) * Dimensions: 192x149x90 mm (7.550x5.860x3.540 inch) Benefits: * Option to select required language - English by default * Option to simply update firmware by inserting a Flash drive containing the newest firmware version * Option of pre-setup of glass cockpit according to the particular aircraft type saved in a Flash drive * Shows a graphical previous flight directly on the glass cockpit display * Shows a checklist including the voice output * Shows a flight logbook including name of pilot (student and instructor), date, time and position of take-off and landing * Download the history of previous flights to a Flash drive or directly to a PC Description Part No. Price Integra TL-6524 System 10-03469 $2,815.00
ACCESSORIES
Description TL-6524 Backup Battery TL-6524 Remote Compass TL-6524 Premium Autopilot Key TL-6524 Silver Autopilot Key TL-6524 Gold AutoPilot Key TL-6524 Servo W/ Magnetic Clutch TL-6524 Terrain of Europe TL-6524 Terrain of Asia TL-6524 Terrain of Africa TL-6524 Terrain of North America TL-6524 Terrain of South America TL-6524 Terrain of South Pacific Part No. 10-03470 10-03471 10-03472 10-03473 10-03474 10-03475 10-03476 10-03477 10-03478 10-03479 10-03480 10-03481 Price $214.95 $358.95 $482.95 $1,373.00 $2,460.00 $1,518.00 $187.95 $187.95 $187.95 $187.95 $187.95 $187.95
This modular Electronic Flight Instrument Systems (EFIS) was specifically designed to allow homebuilt and light sport aircrafts to finally incorporate the latest technology in glass cockpit into the perfect plane at an affordable price! It's uniqueness relies on the combination of all Primary Flight , Engine and Navigation monitoring functions into a fully integrated 10.4 inch Touch-Screen Computer. These Multi-Function Systems provides pilots with: Easy to Scan Touch-Screen Display, L1000c Feel the power at your fingertips as you effortlessly navigate through your flying software of choice with just a tap of a finger. The EFIS 1831 is equipped with a 10.4" touch-screen LCD. Natural resolution of 800x600 pixels with LED backlight of 1000 nits for sunlight operation and a manual dim for night flying. External displays are also available. AHRS and Engine monitoring functions Your choice of EFIS will depend on your AHRS of preference. AHRSbasic will provide you with only a primary flight display. If you would like to monitor your engine gauges, perhaps your choice of AHRS would be AHRS-G or even AHRS - Gplus. You can always upgrade your AHRS system with an Engine POD module. Flight Software System of choice No pilot wants to get stuck in the air fumbling through an unfamiliar program. This Electronic Flight System allows you the flexibility to choose the navigation program you are most comfortable with, such as APIC, Voyager, Anywhere Map, just to name a few. Depending on the software of choice you can enjoy features such as Built-in Terrain, Airspaces, Weather reports, Winds, TFRs etc. If you decide not to purchase a navigation software, you can still enjoy all AHRS and Engine monitoring functions through the standard Levil-Primary Flight Display software (LPFD). EFIS - 1831 Basic (No Engine POD)............ P/N 11-08166 .....$3,485.00 EFIS - 1831 Basic (Engine POD G) ............. P/N 11-08167 .....$3,765.00 EFIS - 1831 Basic (Engine POD G Plus) ..... P/N 11-08168 .....$4,226.00
EFIS & EMS Integra TL-6624 is a multifunctional system that monitors both your flight and engine. TL-6624 integrates all primary flight instruments (Altimeter, Vertical Speed Indicator, Air Speed Indicator, Compass, Accelerometer, Chronometer, Turn-indicator with Inclinometer, Angle of Attack Indicator, internal air temperature, external air temperature, etc.). The EFIS Integra also includes navigation systems (HSI, CDI with connection to the popular Garmin SL-30) and worldwide 3-D terrain maps. It also integrates all primary engine instruments (RPM, Fuel Flow Pressure Indicator, Exhaust Temperature Indicator, Cylinder Head Temperature Indicator, Oil and Water Temperature Indicator, Fuel Level Indicator, Fuel Pressure Indicator, Voltmeter, Ampere Meter, Timer, Internal Air Temperature Indicator, External Air Temperature Indicator, etc.) In addition the EMS Integra includes Propeller Control for Constant Speed and Engine Choke Control. The EMS Integra is designed for use with all engine makes and models. P/N 10-03482 .................$3,939.00
SEE WWW.AIRCRAFTSPRUCE.COM FOR A LIST OF PROBES, SENDERS, AND ACCESSORIES FOR THE INTEGRA TL-6624.
626
MGL AVIONICS
Based on the digital technology intruduced in the V10, the V6 provides the same powerful 6W transmitter and modulation system. Designed for 25Khz spacing with 8.33Khz compatible operation selectable, the dual scan receiver boasts the fastest scanning time which means no loss of reception quality during receive of the standby channel. 100 channel storage and channel operating mode compatible with the V10. Four place, dual circuit intercom system with full isolate. Each intercom microphone input has its own level control and VOGAD noise suppression system. Dual PTT inputs. Black box flight recorder audio output. The intercom outputs are fully stereo with a dedicated stereo music input plus two auxiliary channels for mobile phone and EFIS annunciators. The V6 radio fits a standard 2 1/4 round instrument hole from the rear and provides simple mounting due to captive nuts. Wide Operating voltage range: 12V to 28V DC. VHF-6 Transceiver .............................. P/N 11-10464 .............$1,082.00 Standard Harness................................ P/N 11-10533 ................$179.95
MGL's air band VHF transceiver is the first commercial product of its kind to utilize modern receiver and transmitter technology. All audio processing and much of the receiver and transmitter circuitry is fully digital resulting in an outstanding quality experience unavailable with traditional technology. VHF Airband transceiver based on modern digital signal processing technology with built in multi-mode dual circuit intercom system. Small Size: Fits in a round 3 1/8 instrument hole, but has a mounting depth of only 2.2 + connectors! Light Weight: Approximately 8.8 oz (about 0.5 lb). One of the lightest out there! Powerful: 6 full Watts of transmit power. Transceiver .......................................... P/N 11-07817 .............$1,065.00 Harness ............................................... P/N 11-07818 ................$169.00
8.4 Perfect Fit The Voyager is IDENTICAL in PRICE and FUNCTION to the Odyssey. The only difference is the size. The Voyager is a comprehensive flight, engine and navigation instrument designed for Experimental and Light Sport aircraft. Like the Enigma, the Odyssey/Voyager is a hardware and software concept that promotes a flexible, powerful EFIS platform together with a software application system that is highly user-modifiable. The Voyager shares all software features with the Enigma, but differs in the following ways: Larger screen (8.4 diagonal). High resolution full VGA active TFT display - one of the best we have found! Faster processor for future functionality. 2 user-configurable rotary knobs and 7 function keys. ARINC 429 interface for communication with traffic alert systems (TIS and ZAON XRX) and for communicating with high-end digital autopilots (GPS Steer and Vertical Nav). CAN (automotive bus) for reading the ECU of automotive engine conversions. Analog +/- 150mA NAV inputs to display CDI/LOC/GS when connected to older analog Nav radios Low... Weight: Under 4 lbs. Current Draw: Only 1.5 Amps @ 12 Volts High... Screen brightness (800-1000 nits). Reliability. Flexibility (any screen layout you want!). Feature count (more instrument options available than most EFISs) P/N 11-06963 ...................$3,900.00 The XTreme EMS is based on a 4.3 sunlight readable, wide viewing angle, high resolution LCD display. It integrates an SD card reader (for software updates and for engine data recorder), 5 function buttons, a rotary control. It can be connected to standard MGL Avionics RDAC (engine monitor) boxes (required). The XTreme EMS is designed to fit a standard 3 1/8 round instrument hole. The body is located off-center allowing the unit to replace instruments on the right side of a standard 6-pack configuration or any other location that currently occupies two instruments. Due to the light weight and very low mounting depth no complicated mounting brackets or trays are needed. Power use is low and operation from much less than 12V to around 28V is fully supported EXtreme MS ...................................P/N 11-10393 ......................$850.00 RDAC XB 12 CH Thremocouple ....P/N 11-05552 ......................$230.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A compact 3 1/8 format instrument all that is needed to monitor most smaller aircraft engines from two-stroke ultralight engines to medium sized four strokes such as from Rotax, Continental and Lycoming. Most automotive engine conversions can benefit from the use of the E3 engine monitor. 66 different engine setup configurations possible Universal, programmable rev counter (engine RPM) with digital and analog readout, with a programmable high alarm limit Programmable engine Hobbs meter (password protected) and running timer (flight timer) with automatic flight log Can monitor up to four programmable thermocouple channels for EGT and CHT probes with a user programmable high alarm limit A universal temperature sender input with a user programmable low and high alarm limits A universal pressure sender input with a user programmable low and high alarm limits Supply voltage measurement up to 30V with a user programmable low and high alarm limits Maximum recorded values for all measured values are stored in non-volatile memory High accuracy: Built in thermocouple linearization curves and cold junction compensation Thermocouple temperature probes can be common K, J or E-type thermocouple probes Uses standard automotive temperature and pressure senders Special Rotax 912/914 engine monitor mode utilizing the standard built in Rotax NTC CHT probes Supports the new Rotax 912/914 4-20mA oil pressure sender. P/N 11-05578 .......................$315.00 The XTreme EFIS is a mini-EFIS unit based on a 4.3 sunlight readable, wide viewing angle, high resolution LCD display. It integrates an SD card reader (for software updates and for flight data recorder), 5 function buttons, a rotary control and a basic GPS navigator (functions available in future firmware release). It can be connected to standard MGL Avionics AHRS sensors and RDAC (engine monitor) boxes. It also integrates a CAN Aerospace compatible communications interface that will be used with future versions of MGL Avionics sensors. Standard RS-232 ports are also available. The XTreme is designed to fit a standard 3 1/8 round instrument hole. P/N 11-08757 ....................$1,150.00
The Odyssey is a comprehensive flight, engine and navigation instrument designed for Experimental and Light Sport aircraft. Like the Enigma, the Odyssey is a hardware and software concept that promotes a flexible, powerful EFIS platform together with a software application system that is highly user-modifiable. As an EFIS hardware platform, the Odyssey provides state of the art multi-processor based processing utilizing components chosen for absolute robustness in radiation intense environments such as found at high altitudes. This is coupled with intense low power design methods to further maximize overall system application and reliability. The large amount of flexibility built into the base system allows the adaptation of the Odyssey to almost any mission and aircraft. Due to low system cost, the Odyssey is equally suited to very light aircraft, gliders and rotorcraft, while providing enough flexibility to be utilized by even twin-engine aircraft with full dual engine monitoring. 10.4 Display MGL Odyssey Generation 2 ..... P/N 11-05835 .. $3,900.00 To complete these systems: Select a RDAC engine Unit, Select Sensors, Order Attitude/Heading Sensor (SP-28, SP-4), Select accessories.
Optional accessory MGL Servo link kit. Kit includes: (1) Alu tube 30 cm (1) Rod end bearing RHT with fitting and nut (1) Rod end bearing LHT with fitting and nut (4) Rivets P/N 11-10423 .......................$995.00
This sensor can be used to measure DC currents in aircraft power systems in a wide range from less than 4A to as high as 120A depending on installation and configuration. The sensor connects to an EFIS system via spare RDAC inputs. Inputs CHT1,CHT2,oil pressure or oil temperature can be used and these can also be used on a second RDAC unit (consider a low cost RDAC VD as second RDAC if required). G1 and G2 EFIS systems can support up to 4 of these sensors while Enigma can support 2. P/N 11-10422 .........................$49.75
627
MGL AVIONICS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Enigma is a comprehensive flight, engine and navigation instrument designed for Experimental and Light Sport aircraft. The large amount of flexibility built into the base system allows the adaptation of the Enigma to almost any mission and aircraft. Due to low system cost, Enigma is equally suited to very light aircraft, gliders and rotorcraft, while providing enough flexibility to be utilized by even twin-engine aircraft with full dual engine monitoring. Please note: Select RDAC model and engine senders
for engine functions, and select Attitude/Heading sensors (SP-4 and SP-2) for AHRS funtions. P/N 11-05555 ...............$2,550.00
SENDERS
Model CHT10 CHT12 CHT14 CHT18 CHT Bayo EGT EGT Clamp Lg EGT Clamp Sm Water temp. Prec. Sender Oil Temp OP-VDO Flowsend 201A-6 201B-6 201C-6 FP-100 UMA FP-35 UMA FP 7 PSI UMA CNV-AT GT1 Keyring Airtalk MNEA Cab Ferrite Ferrite - Clip Batt 12v 1.2Ah Batt 12v 2.5Ah Tach-Slick Tach-Bendix SD 1GB Shunt CAP Transorb Description Part No. Type-K CHT Thermocouple,10mm spark plug 11-05561 Type-K CHT Thermocouple, 12mm spark plug 11-05562 Type-K CHT Thermocouple, 14mm spark plug 11-05563 Type-K CHT Thermocouple, 18mm spark plug 11-05564 Type-K CHT Therm, bayonet-style 3/8-24 11-05565 Type-K EGT Thermocouple, M8 x 1 thread 11-05567 Type-K EGT Therm., Clamp-Type Lg. (<1.5 dia) 11-05568 Type-K EGT Therm., Clamp-Type Sm. (>1.5 dia) 11-07842 Water Temperature Sender 11-05566 Precision Water/Oil Temperature Probe 11-05570 Oil Temp, 5/8-18 UNF thread (Lyc/Cont) 11-08070 Oil Pressure 150 PSI, VDO 360-004 11-08066 Fuel Flow Sensor 11-05559 Floscan 201A-6 Fuel Flow Sensor 30 GPH A 11-08071 Floscan 201B-6 Fuel Flow Sensor 60 GPH B 11-08072 Floscan 201C-6 Fuel Flow Sensor 80 GPH C 11-08073 Fuel Pressure 100 PSI (fuel injected engines) 11-08067 Fuel Pressure 35 PSI (carbureted engines) 11-08068 Fuel Pressure 7 PSI (Rotax/Jabiru engines) 11-08337 Serial to Parallel Converter - Ultra/Infinity Sngl 11-05723 Gear Tooth Speed Sensor 11-05725 Download Keyring Device, Incl. Airtalk PC Cable 11-05726 Airtalk PC Cable with Serial Adapter 11-07810 NMEA to Airtalk Cable for fuel computer 11-08331 EMI Ferrite Bead Intereference Suppresor 11-08064 EMI Ferrite Bead Intereference Suppresor Clip-on 11-08332 12V 1.2Ah Backup Btty - Sealed Lead-Acid 11-08065 12V 2.5Ah Backup Btty - Sealed Lead-Acid 11-08065 UMA Tach Pickup for Slick Mags 11-08334 UMA Tach Pickup for Bendix Mags 11-08335 1GB SD Card with North American Databases 11-05569 50mV Shunt - 50 Amp 11-08330 10,000uF / 25V Electrolytic Capacitor 11-05724 33V High Speed transorb 11-05727
Altitude to 40 000 ft (12 195 m) calibrated, 1ft dynamic resolution Airspeed ASI analog and digital, TAS digital Stopwatch Glide and climb ratio to 1/99 QNH 960 to 1 060 mb (28.3 - 31.3 Inch of Hg) QNE 1013 mb quick select (29.9 Inches of Hg) Time of day, Date for flight log entries Air time since take-off (or lesson time) Ambient temperature using external sensor Up to two Fuel level using flow sender or optional level sender Fuel flow using optional flow sender Current range estimate (range at current speed and fuel burn) Fuel bingo estimate (time until tank empty) Range calculator using manually entered ground speed Air distance made good Voltage. Supply to unit. Usually 12V battery. VSI +/- 9 990 ft/minute (50.7 meters per second) range Flight log storing up to 200 entries Hobbs meter, presetable to current engine time Density altimeter Barometer for ambient pressure Aircraft registration number display Maintenance timer Warnings for engine temperature, speed high, speed low, maximum altitude, low fuel level, etc Alarm output to switch a warning lamp Audio alarm output to drive a panel speaker or low level output for alarm tone injection into a suitably equipped headset or intercom system. Master and slave modes for dual instrument setup Measuring take-off run to 50 ft (15.24 m) above ground level Artificial horizon (requires SP-4) Slip indicator (requires SP-4) Rate of turn indicator (requires SP-4) Compass (requires SP-2) Air talk link for connection to; - PCs and Laptops using optional cable - Stratomaster Black Box flight recorder - Stratomaster Ultra secondary instrument - Key ring flight log download device - Compass and AHRS sensor packages. P/N 11-05550................................... $945.00
11-05707 $245.00
The Stratomaster Extreme is a glass cockpit primary flight and EMS system for use in light aircraft. The Extreme is designed specifically for outdoor use in aircraft with open cockpits. Able to give excellent viewing quality in poor light conditions under low and high temperatures, the Stratomaster Extreme is the most complete and compact light aircraft instrumentation package available on the planet today. Providing a multichannel EMS as standard, the Extreme gives you the ability to keep a close watch on your engine and to optimise your engine performance. The EMS is highly configurable in true Stratomaster fashion and is therfore suitable for a large range of engines from small two-stokes to four cylinder four strokes. Rotax engines are of course usable from the 447 to the 914 but the EMS is not limited to just Rotax engines - connect just about anything you like, from VW to Jabiru to 2SI. P/N 11-05571 ...............$1,195.00
628
EFIS SYSTEMS
Cheetah FL 190 has all the capabilities and ability to upgrade of the Flight Cheetah line at a price that is affordable for every cockpit. The FL 190 runs on a combination of hard keys and touch screen access (stylus not required) Package includes: Flight Cheetah FL 190 display Complete TrueMap software package WAAS GPS Receiver by US Global SAT AC power adapter DC power adapter (accepts 9-28 volts) 4 cell Rechargeable Lithium ION Prismatic Battery. Specifications: Intel Atom 1.3GHz Processor 1gb DDR2 Ram 7 diagonal High Contrast LCD. 16GB SLC Solid State Hard Drive (32GB option available) 802.11 a/b WIFI Resolution 1024x600 1 USB 2.0, H/P jack, DC in. Dimensions 8.2 x 4.6 x 0.8 Weight 1.48 lbs. True Flight Cheetah FL190 Display ........... P/N 11-04828 ........$1,524.85 True Flight WXWORX Receiver ................ P/N 11-04830 ...........$595.00 True Flight WXWORX Software ................ P/N 11-04831 ...........$195.00 True Flight XRX Traffic Software ............... P/N 11-04832 ...........$181.95 True Flight Electric Attitube Ind. ................ P/N 11-04834 ...........$795.00
With the FL 210 you get the an optimal combination of affordability, incredibly high quality bright display, and a range of capabilities unequaled by anything else you will see out there in the industry (see comparison below). The FL210 is comparable to the certified panel install MFDs in the $10,000-$20,000 range but with far more capabilities, and a far more affordable upgrade path for the future. Package includes: Flight Cheetah FL210 display Complete TrueMap software package WAAS GPS Receiver by US Global SAT AC Power Adapter DC Power Adapter (accepts 9-28 volts) Video and instructional manuals. Specifications: 1gb DDR2 Ram 6.5 diagonal High Contrast LCD. 16GB SLC Solid State Hard Drive Resolution 640x480 3 Hi-Speed USB 2.0 Ports Dimensions 8.06 H x 5.44 W x 1.93 D. Weight 2.7 lbs. True Flight Cheetah FL210 Display ........... P/N 11-04829 ........$2,995.00 True Flight WXWORX Receiver ................ P/N 11-04830 ...........$595.00 True Flight WXWORX Software ................ P/N 11-04831 ...........$195.00 True Flight XRX Traffic Software ............... P/N 11-04832 ...........$181.95 True Flight Electric Attitube Ind. ................ P/N 11-04834 ...........$795.00
The Vertical Power VP-400 is a next-generation backup EFIS that complements todays primary EFIS products and incorporates its own independent solid-state gyros, GPS receiver, and electronic circuit breaker system. The Vertical Power VP-400 is a back-up EFIS that flies your aircraft safely to the best runway in an emergency. The best airport is the one with the longest and widest runway that is pointed most directly into the wind that you can still safely glide to without impacting terrain or obstacles. THAT is the airport you want to glide to in an emergency! Your existing GPS nearest function understands none of these things. The VP-400 is built using the same field-proven hardware and software technology as our other products. Its been proven in hundreds of experimental aircraft over thousands of flight hours. And you can easily wire backup circuits for critical avionics to eliminate any single point of failure concerns. The VP-400 system includes a display, GADAHRS (GPS, air data, attitude, heading reference system), and one power distribution unit (PDU). Requires connector-only kit or wiring harness kit. Note: You do not need a crimp tool if youre ordering the wiring harness kit, which has the terminals already crimped on the wire. Crimp tools are only needed for connector-only kit. Description VP-400 Accessories VP-400 Wire Harness Kit VP-400 Connector Only Kit VP-400 PDU Mounting Tray VP-400 Display Angle Bracket Crimp Tool Part No. 11-10546 Part No. 11-10547 11-10548 11-10549 11-10550 11-09836 Price $7,728.00 Price $579.00 $289.95 $115.95 $77.50 $56.75
CM WP ME HA AP LG EP CS
HADRON MULTINAV
From a fully featured synthetic vision EFIS to a marine chart plotter, the Hadron is packed with features to make your travel easier and more pleasant, all in a lightweight portable unit. For flying it acts as a combined MFD / PFD including all main instruments like 2D Moving Map and HSI, 3D Topographic textured vision (3DTTV), attitude, compass, altimeter, rate of climb, ground speed, wind data, waypoint and distance indication, fully featured flight planning and many more. With the built-in Collision Avoidance System you will be able to rapidly identify
The Vertical Power VP-400 is a next-generation backup EFIS that complements todays primary EFIS products and incorporates its own independent solid-state gyros, GPS receiver, and electronic circuit breaker system. The Vertical Power VP-400 is a back-up EFIS that flies your aircraft safely to the best runway in an emergency. The best airport is the one with the longest and widest runway that is pointed most directly into the wind that you can still safely glide to without impacting terrain or obstacles. THAT is the airport you want to glide to in an emergency! Your existing GPS nearest function understands none of these things. The VP-400 Duo system includes a display, GADAHRS (GPS, air data, attitude, heading reference system), and two power distribution units (PDUs). The Duo is recommended for true dual-independent bus electrical architecture (two batteries, two master contactors, two independent alternators, and a cross tie contactor) or a single bus architecture that needs more circuits than a single PDU can provide. Requires connector-only kit or wiring harness kit. Note: You do not need a crimp tool if youre ordering the wiring harness kit, which has the terminals already crimped on the wire. Crimp tools are only needed for connector-only kit. Description VP-400 DUO Accessories VP-400 DUO Wire Harness Kit VP-400 DUO Connector-Only Kit VP-400 PDU Mounting Tray VP-400 Display Angle Bracket Crimp Tool Part No. 11-10551 Part No. 11-10552 11-10553 11-10549 11-10550 11-09836 Price $10,625.00 Price $966.00 $389.00 $115.95 $77.50 $56.75
IN EL AV TO PS BV
and avoid traffic conflicts. While driving it acts as a complete GPS navigator with highly optimized routing and 3D / 2D display. For sailing it provides marine charts and synthetically generated 3D view of the sea floor and shoreline. And thats not all... The Hadron is also equiped with Wi-Fi and Bluetooth connectivity and can provide features like web browser, e-mail client, media player etc. Using the Wi-Fi connection you can download weather data, NOTAMs or other valuable information right before your trip. Using the Bluetooth a number of accessories can be connected to the Hadron like the Topwing Inertial Unit to provide real time, 9DOF attitude and acceleration data.OF attitude and acceleration data. See www.aircraftspruce.com for complete specifications Multi-Nav ................................................... P/N 11-09913 ........$2,375.00 Inertial Unit ................................................ P/N 11-09914 ...........$595.00
629
CAMERA SYSTEMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
1080p Single camera with quick release audio cable. Video - 5 Megapixel Sensor, H.264 Codec, .mov file type Audio Standard - GA audio headset interface (6ft cable), AAC Audio Compression Lens - Wide Angle Lens: 135: High Definition, 110: Standard Definition, Dual alignment lasers Memory - Removable MicroSD, Capacity: 16GB (2GB included), Average Record Time HD >> 30 min / GB, SD >> 60 min / GB Body - Water Resistant Aluminum Shell, TRail Mount System Battery & Power - Removable Lithium-Ion Battery, Record Time: Up to 2 hours, Charge via USB to computer or chargers (sold separately), Charge time: 3 hours (average) P/N 11-09357 ...........$598.95 Motocam 360 4 Camera System with Quick Release Cable - 4 Cameras with a 4 Channel Control Box, 4 Camera Cables, and 4 Mounts. P/N 11-09361 ........$2,199.99
1080p Single camera with quick release audio cable. Video - 5 Megapixel Sensor, H.264 Codec, .mov file type. GPS - Built-in GPS receiver, Time to first fix using AssistNow Service Audio Standard - GA audio headset interface (6ft cable), AAC Audio Compression Lens - Wide Angle Lens: 135: High Definition, 110: Standard Definition, Dual alignment lasers Memory Removable MicroSD, Capacity: 16GB (2GB included), Average Record Time HD >> 30 min / GB, SD >> 60 min / GB Body - Water Resistant Aluminum Shell, TRail Mount System Battery & Power - Removable Lithium-Ion Battery, Record Time: Up to 2 hours, sold separately) P/N 11-09359 ...........$648.95 Motocam 1080P 4 Camera System with Quick Release Cable & GPS- 4 Cameras with a 4 Channel Control Box, 4 Camera Cables, and 4 Mounts. P/N 11-09363 ........$2,283.00
MOTOCAM 1080P SINGLE CAMERA WITH QUICK RELEASE CABLE & GPS
1080P Single camera with quick release audio cable and integrated LCD. Features: Sensor type: CMOS, Water Resistance: 0.5m, Video resolution: 1080p, 720p & WVGA, Video format: H.264, File format: .MOV, Frames per second: 30 FPS, Video format: 16:9, Lens Rotation: 300, Recording Angles: 127 in 1080p, 170 in 720p & WVGA, White balance: Auto, Exposure: Auto / Manual (advanced users), Zoom: Digital x4 (in 720p & WVGA mode), Standard GA audio headset input (6ft cable), AV Output: HDTV out (cable included), Battery: 1110mAh rechargeable lithium-ion. Power-Save option saves batteries by powering down the screen, Built-in memory: 32 MB SDHC memory capacity: Supports memory cards up to 32 GB Photo resolution: 5 Megapixel LCD screen: 1.5 colour TFT Lens focal range: 0.5m to infinity. P/N 11-09358 ..........$599.95 Motocam 1080P Dual Camera System with Quick Release Cable & LCD- 2 Cameras with a 4 Channel Control Box, Camera Cables, and Mounts. P/N 11-09616 ........$1,499.00 MOTOCAM 1080P 4 CAMERA W/ QUICK RELEASE CABLE & LCD - 1080p 4 camera with quick release audio cable and integrated LCD. Camera Mounts: Choose flat Mount (4), Ubolt mount(4), or strap mount(4). ................. P/N 11-09362 ............$2,299.95 Wireless................... P/N 11-10003 ............$2,499.00
MOTOCAM 1080P SINGLE CAMERA WITH QUICK RELEASE CABLE & LCD
1080p Single camera with quick release audio cable, integrated LCD, integrated GPS Video: Sensor Type: 1/3.2 5M pixels CMOS, Light Sensitivity: Low-light sensitivity (>1.3V/ lux-sec), Video Format: H.264 in Quicktime format (.mov) for Windows and Mac OS. Exposure Control: Vivid, Negative, B&W, Sepia, Art modes Photo Resolution: Supports 3 megapixel and 5 megapixel, Photo Burst Capture: Continuously 3 photo and 5 photo bursts Capture Modes: Single Shot, Countdown Timer: 5s and 10s settings Night Mode and White Balance adjustments Audio: Standard GA audio headset interface (6ft cable), Audio Format: 48kHz (Max.) ADPCM Power: Removable Lithium-Ion Battery, Record Time: Up to 2 hours GPS Module: Maps location where the video was shot on Google Maps, Shows corresponding acceleration and altitude on Google Maps Compatible with Windows XP, Windows 7 and Windows Vista Operating Systems Requires use of Quick Time 7 or greater, Not compatible with Mac OS. P/N 11-09360 ...........$698.95 Motocam 1080P 4 Camera System with Quick Release Cabel, LCD, and GPS - 4 Cameras with a 4 Channel Control Box, 4 Camera Cables, and 4 Mounts. P/N 11-09364 ........$2,399.95
MOTOCAM ACCESSORIES
MOTOCAM 16GB MICRO SD CARD - MotoCam 16GB Micro SD Card w/ Adapter P/N 11-09366 .................$54.25
MOTOCAM 1080P STRADDLE - For MotoCam 1080P camera systems P/N 11-09367 .................$38.95
With the largest lens of any PoV camera, the Contour+ captures beautiful 1080p video. The 2.8" aperture, 170 wide-angle rotating lens delivers the truest, high quality image with minimal distortion and fisheye. It records and streams Full HD in all its glory - all from Contour's unique, awardwinning form-factor. The Contour+ is specifically set up for capturing the perfect visuals. The reason is a market-leading mix of camera technology, from a six-element glass lens and 1080p video quality, to adjustable white balance for dialing in the details of each location. The Contour+ also expands normal perspective with an F 2.8, 170 superwide-angle lens, integrating peripherals and backdrops that would get cropped with a narrower focus. In addition, we incorporated a 270 rotating lens to allow you mount or position the camera in an infinite number of ways. The camera also connects via an HDMI port, allowing live streaming of HD video via monitor or TV - to quickly and easily watch and enjoy your videos. This eliminates the lag time of downloads and transfers when checking footage on location or back home. NOTE: Camera may be used for aircraft use, but it is not designed specifically for use in aircraft. Additional hardware may be needed if mounting on a plane. (Hardware not available through this manufacturer.) P/N 11-10406 ......................$499.99
CONTOUR+ CAMERA
The A/V-ator HD system records in-flight video at 1080 resolution, while recording crystal-clear aircraft radio/intercom audio with Light Sport Groups proprietary noisereduction circuitry. GPS speed, altitude, and position data are encoded with the video. Also included, are enhanced optical components which minimize the rotating propeller distortions that are common on CCD-camera video systems. P/N 11-10019 ......................$595.00
630
CAMERA SYSTEMS
MOTOCAM CAMERA SYSTEMS
4 CAMERA SHOCKBOX DIGITAL VIDEO RECORDING SYSTEM
Package Contents: * Sony 550 CCD color camera (4) * 12 foot camera cables (4) * RAM ball and socket camera mounts (4 set) * Stereo audio communication cable (1) * 4Gb SD memory card (1) * Video Editing Software (1) * TV & PC video transfer cables (2) * Charger(1) PN 11-07112.......... $1,799.95 The AV-HD is a high definition aircraft camera system which records video in full 1080P HD featuring a built-in LCD screen. AV-HD is compact and loaded with features. Using the included Headset Adapter Cable, the AV-HD is capable of recording crisp headset audio as well. Camera, recorder, and cable are all water resistant, rugged and built for harsh environments! Features an advanced lens system that mitigates the propeller in the video providing a pleasant translucent blur. Wide Field-of-View of 170 degrees providing the widest angle available. Mounting is a snap using the built in 2.0 LCD and one of the many camera mounts included in the system. A cigarette power plug adapter is included. Videos can be easily downloaded using the USB cable or straight from the SD card. Video files can be viewed on a PC or a Mac with no special software needed, and can be easily uploaded to YouTube. P/N 11-09963 ........$499.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The UDVP recorder offers two channels of video with multiple user interfaces, media types, and modules. The UDVP Sport Plus 2 System includes everything you will need to start recording whether it be airborne recording or any other aviation application. Sport Plus 2 Systems include the UDVP Recorder, (2) WD-600 Wide Angle Bullet Cameras and all of the basic accessories for mobile recording. Solid metal, waterproof connections and 360 degree shielded cabling designed for harsh environments and airborne digital video recording. Feature the only prop filtering technology built into a camera. Designed for general aviation applications. UDVP Sport Plus Dual Camera Systems ..... P/N 11-09595 .....$2,199.00 Aviation Headset Adapter Cable .................. P/N 11-09596 ..........$79.99 Record Start/Stop Switch ............................. P/N 11-09599 ..........$69.99
run-time.
The Advanced Travel Mount (ATM) is a small, lightweight portable travel system designed to provide stabilized video shoots at an economical price. The user supplies their own camera and power. The ATM system requires no assembly. Simply attach the camera and power up to the gyros. Maximum camera weight is 10 lbs. The system comes with a one year warranty. The ATM systems are used in helicopter and fixed wing aircraft. Helicopters, cars, boats, ATV's, etc. The ATM is a camera tripod with accessories and weighs 16 lbs plus camera weight. It must remain portable and cannot be bolted to the airplane, helicopter, or vehicle. It is usually placed on the seat next to the camera operator and the seat belt is used to secure it. It can also be taped or strapped down. There are two power cables included. One cable can be used on a small rechargeable (user supplied) 12 V 18-35 amp battery (available at Aircraft Spruce). The second cable is a cigarette adapter and can be used in a 12 V source of least 10 amps. The ATM flys under FAR91.21 for Portable Electronic Equipment. Note: This is a portable camera stabilizer and does not attach to the helicopter or aircraft, they do not need an STC or 337. In The Box: 1 ATM Gyro Platform, 2 KS-8 Tungsten Gyros, 1 - 2 Output 12 Volt Inverter/ Power Cables, 1 - Molded Travel Case. P/N 11-09854..................... $11,495.00
The UDVP recorder offers two channels of video with multiple user interfaces, media types, and modules. The UDVP Pro Plus 2 System includes everything you will need to start recording whether it be airborne recording or any other aviation application. Pro Plus 2 Systems include the UDVP Recorder, (2) WD-600 Wide Angle Bullet Cameras and all of the basic accessories for mobile recording. Solid metal, waterproof connections and 360 degree shielded cabling designed for harsh environments and airborne digital video recording. Feature the only prop filtering technology built into a camera. Designed for professional users with the highest video quality, featuring Military grade cabling and connectors for determinant installations. The UDVP-Pro also has the ability to upgrade to Full HD. DVP Pro Plus Dual Camera System ............ P/N 11-09594 .....$2,799.00 Aviation Headset Adapter Cable .................. P/N 11-09597 ..........$79.99 Record Start/Stop Switch ............................. P/N 11-09598 ..........$69.99 The Flight Recorder Pro is a patented and portable flight recorder. The unit captures and records high quality video from two small cameras, as well as GPS data and audio from internal and external communications in the cockpit. Captured imagery includes the pilots view and the instrument panel as well as the pilots manipulation of the flight controls. The data is saved to a small personal memory card which can then be downloaded and reviewed, analyzed and tagged over the Internet. Package includes: Netbook, 2 - Webcams, GPS cable and accessories. Features: Video record two views - both instrument panel and external horizon views, Audio record the cockpit and ATC communication, View your flight recording with GPS track overlaid on Google Earth, Share tagged segments of your flight with others - anytime, anywhere P/N 10-04513 ........$1,795.00 The Best Economical and Efficiency Solution Applied by GPS BT-Q1000XT adopts the latest GPS chip-set MTK II bringing you the highest performance and longest battery life for your special commercial requirements. With it reliable and durable design, BT-Q1000XT is definitely the best choice to improve your bottom line: lower the cost and improve efficiency. Make your business having more bargaining power and competitive advantages over your competitors. Powerful Software Integrated with Google Map P/N 11-08343 ....................$110.00
Mounts a traditional camcorder (i.e. Sony) 360 degrees of rotation 50 degrees of tilting ability Optional stick grip with built in hat switch Remote switch control Weight - 7lbs Dash mounted LCD screed to see what the camera is seeing Vibration dampening built into mounting bracket.
Description Part No. Basic Kit - Includes camera mount system 11-04318 with remote switch Deluxe Kit - Includes camera mount system 11-04319 with remote switch and LCD screen Super Deluxe Kit - Includes camera mount 11-04320 system, built in grip switch, & LCD screen Price $750.00 $981.00 $1,245.00
Features of the Acculock Black Box Camera include 2CH video recording, GPS module (speed & location info), exclusive viewer playback, indoor infrared recording, and an online map (Google). Great for planes and cars P/N 11-10444 ......................$499.00
631
ANTENNAS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Here is a new series of aircraft antennas specifically designed to be used without a ground plane. This means that composite aircraft and fabric covered aircraft can now have their antennas mounted totally within the structure. These antennas are designed using the latest engineering technology. Laboratory measurements show them to have better electrical characteristics than currently available products. The unanimous reports from pilots who have been using them confirm that they out perform everything now available on the market. One antenna model works for communication, navigation, and for ELT (Three antennas in the aircraft, but all the same design), and this design is tolerant to installation errors. They will work in metal airframes when a plastic or fiberglass wing tip or similar plastic component is available to provide the mounting structure. The VHF antennas, 5T and 5I, differ only in the location of the BNC connection. The 5T is configured to allow the coax cable to be routed flat along the mounting surface of the airframe. This antenna model would be appropriate for a composite aircraft where the antenna would be mounted in the fuselage or fin and the coax would be close to the skin and be attached periodically for strain relief. In either case, the antenna can be used as a retrofit on in service aircraft or in new installations. The 5I series has the BNC connection positioned so that the coax cable would route out and away from the antenna mounting surface. This configuration is offered for antenna installations such as wing tips of fabric aircraft. If the antenna is mounted on the inside of the tip, the coax route is directly inward toward the wing root and the BNC connection is located near the spar to provide support for the cable. Both antennas are identical in their electrical performance. Features: Inside mounting. Use with composite skins. Use with fabric covered airframes. Glue or bond to the airframe. Light weight. Wide service temperature, No ground plane corrosion, Mount anywhere inside, Maximum range with low VSWR. Model VHF series designed for comm or nav or ELT. Guaranteed against failure for the life of the airframe. Adapts to existing airframes or to in process construction. Model 5I (straight BNC connector) NAV/COM Antenna ......................................... P/N 11-04261.................................... $118.95 Model 5T (right angle BNC connector) NAV/COMM Antenna................................ P/N 11-04262.................................... $118.95 Model L2 Transponder Antenna ............................................................................ P/N 11-04212...................................... $98.95 GPS antenna kits from Comant enable you to install a low profile aerodynamic GPS antenna to the exterior of your aircraft. These antennas are all FAA approved under TSO C129, provide superior GPS signal acquisition, and are resistant to ice build-up in flight. All kits come complete with 10 of coax cable. Call with Comant Part No. for pricing on the Comant C1401, C1405, CI-406, OR CI4510 series antenna you require. These antennas are designed for aircraft up to 600 knots and feature a rectangular footprint. Available in active or passive models. Height: 0.75. 50 ohms.
CI 401 ANTENNAS
Magellan w/detachable antennas except 5000A, Garmin 55, 89, 90, 95, 100, 150, 155, 165, 250, Skyforce, and panel GPS requiring 26 dB gain CI4510-6KC w/pass thru holes Bendix King KLX100 CI4510-7KC CI4510-6K2C or CI4510-7K2C $528.95 $547.95 $524.95
technician.
632
COMANT ANTENNAS
COMANT DME/TRANSPONDER ANTENNAS
COMANT DME/TRANSPONDER (CI 100 SERIES) - All Metal
Blade DME/Transponder antenna designed and developed for Mach 2 military aircraft. Design is unique in the blade and mounting base are die-cast as one piece with no dielectric material in the airstream. Standard six-hole mounting configuration. See Order Options for available connectors
Connector BNC TNC C HN N ORDER OPTIONS Model Part No. CI 100 11-06812 CI 100-2 11-06813 CI 100-3 11-06814 CI 100-4 11-06815 CI 100-5 11-06816 Price $222.95 $252.95 $309.95 $370.95 $286.95
COMANT DME/ TRANSPONDER (CI-110-41-30) Frequencies Covered 960 -1220 MHz. All metal, low profile antenna is designed for business jet and commercial high speed aircraft. With a popular four hole mount and connector with short path to ground, this antenna is ideally suited for those aircraft equipped with standard and Mode S transponders. Tough one-piece construction provides 175 lbs. side load capability. Moisture failure is prevented with completely sealed construction. P/N 11-06821 .........$368.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CI-101 TRANSPONDER ANTENNA Frequencies Covered 10301090 MHz. Transponder antenna with top loaded stub monopole. Contact points are made from beryllium copper. Mounts through a single 0.600 diameter mounting hole. P/N 11-17970 ................. $99.50
COMANT DME/ XPDR (CI-110-61-30) - Frequency 960 -1220 MHz. All metal, low profile antenna is designed for business jet and commercial high speed aircraft. Six hole mount and connector with short path to ground. Suited for those aircraft equipped with standard and Mode S transponders. Tough one-piece construction provides175 lbs. side load capability. Moisture failure is prevented with completely sealed construction. P/N 11-06823 .........$315.95 COMANT DME/ TRANSPONDER (CI-305) - Frequency 960-1220. Miniature high speed DME/ Transponder - one of the smallest DME/Transponder antennas available from Comant. Less than 2.75 inches high, featuring a very low-drag frontal profile. Strong, lightweight and easy to mount using four external mounting holes through base. P/N 11-06824 .........$204.95
COMANT DME/ TRANSPONDER (CI -105-3) - Frequencies Covered 75 MHz. Antenna configuration specifically designed for external applications using a three hole flange mounting. BNC female connector. P/N 11-06810 .........$309.95
COMANT DME/XPDR (CI -105-6 & 105-7) - Frequency 960-1220 MHz. Comant CI 105-3 DME/ Transponder antenna. Ant signed for external applications using a three hole flange mounting. BNC female connector. CI 105-6 connector - BNC . P/N 11-06811..$280.95 CI 105-7 connector - C ...... P/N 11-06817..$346.95
COMANT DME/ TRANSPONDER (CI-105-9) - Frequency 960-1220 MHz. Antenna assembly encased in a glass reinforced polyester molded shell. Comes standard with a 6 extension coax cable and BNC connector. This model offers standard two stud mounting, where the studs are extended to 1 inch in length. P/N 11-06818 .........$236.95
COMANT DME/ TRANSPONDER (CI -105-16) Frequency 960-1220 MHz. Was designed specifically for the Honeywell Bendix- King KA60. This unit offers the extended length two-stud mounting found on the KA60. Tested to the tougher DO-160D environmental requirements, this antenna offers the best in ruggedness and performance. P/N 11-06819 .........$140.95
COMANT IRIDIUM (CI-490-1) - Dual-band passive antenna operates at Iridium frequencies, with continuous transmit and receive coverage from 1616 to 1626.5 MHz. Can also operate separately as a passive GPS antenna. Iridium delivers essential communications services to and from areas where terrestrial communication are not available. P/N 11-07078 .....$489.95
633
COMANT ANTENNAS
COMANT RADIOPHONE / DME ANTENNAS COMANT RADIOPHONE / DME ANTENNAS
COMANT VHF COMMUNICATIONS (CI-291) Frequencies Covered 118-137 MHz Upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO 186A MOPS. P/N 11-17991...........$189.95 COMANT VHF COMMUNICATIONS (CI-292-1 - Frequencies Covered 118-137 MHz. Designed specifically for top mounting on an aircraft. Upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS. P/N 11-05093...........$217.95 COMANT VHF COMMUNICATIONS (CI-292-2) - Upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO 186A MOPS. P/N 11-29202...........$229.95 COMANT VHF COMMUNICATION (CI-248-5 - Frequencies Covered 118-137 MHz. Developed for Cessna 182 and 182T aircraft. The only VHF antenna with a built-in notch filter, that allows installation in close proximity to GPS antennas without co-sight interference. P/N 11-05585...........$317.95 COMANT VHF COMMUNICATIONS (CI-108) - Frequencies Covered 450-470 MHz Suitable for either top or bottom mounting. Upgraded to the RTCA DO-160D environmental requirements with DO-186A MOPS. Optional leading edge protection - CI 108-L. CI-108 ............... P/N 11-07079...........$673.00 CI-108L ............. P/N 11-07080...........$474.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
COMANT UHF (CI-177-20) - 450-470 MHz. A rugged monopole antenna particularly wellsuited to the harsh environments experienced on the underside of an aircraft. Features standard4-hole mounting, diecast metal base and radiator encased in glass laminate housing. P/N 11-06836 .....$615.00 COMANT UHF (CI-200) - 450-470 MHz. Rugged monopole antenna particularly well-suited to the harsh environments experienced on the underside of an aircraft. Features a very compact 3-hole mounted die-cast aluminum base with the radiator encased in a glass laminate housing. P/N 11-06837 .....$385.95
634
COMANT ANTENNAS
COMANT VOR / LOC / GS ANTENNAS
COMANT GLIDE SLOPE (CI-193) - Frequencies Covered
329-335 MHz (GS) For interior mounting for GS reception. P/N 11-05200 ...........$178.95
CM WP ME HA AP LG EP CS IN EL AV
COMANT VOR/GS (CI-205-3) - Frequency 108-118 MHz (VOR/ LOC) 329-335 MHz (Glide Slope) Mounting on the aircraft vertical stabilizer or helicopter tail boom. Set includes a pair (2) of towel bar sensor elements each with a single BNC output connector and a one-piece dual coax interconnect signal combiner harness with a single BNC connector output. Provides for a single cable routing to the avionics location. P/N 11-17985 ........$1,393.00 COMANT VOR/LOC/GS (CI-215) - Frequencies Covered 108118 MHz (VOR/LOC) , 329-335 MHz (GS) Detachable elements featuring two integrally molded mounting legs or spacers for increased strength. P/N 11-17926 ...........$424.95
COMANT VOR/LOC/GS (CI-259E) - Frequencies Covered 108-118 MHz (VOR/LOC), 329-335 MHz (GS) Fixed elements for helicopter aircraft. P/N 11-06809 ...........$308.95
cell Broadband Systems (ABS). Single and twin engine piston aircraft for applications of this antenna design. Some light turbine and light jets. Consult your FBO or installation shop for best application information. VHF 118-137 MHz GPS 1575.42 MHz / 26.5 dB Gain P/N 11-06789 .........$576.00 COMDAT VHF/GPS CI-2680-201 - Dual function high speed antenna for twins and light jets. Featuring VHF and GPS in a single antenna. Designed for use with Garmin GPS panel mount receiver units requiring 17.0 dB gain. Not compatible with most portable GPS receiver systems. VHF 118-137 MHz GPS 1575.42 MHz / 17.0 dB Gain P/N 11-06790 .........$576.00
COMDAT GPS (CI-401-221) - GPS antenna with TNC connector. Meets RTCA DO 160-D operating standards including direct effects lightning. Operate with 26.5 dB panel mount GPS receivers. Certified FAA TSO-C144 for GPS and GPS WAAS Class Gamma 1 equ. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. Not compatible with most portable GPS receiver systems. GPS 1575.42 MHz / 26.5 dB Gain P/N 11-06795 .........$422.95 COMDAT GPS CI 408-20/ ACTIVE - Designed for airborne
applications with aircraft speeds up to 600 KTAS. Drop-in replacement for many popular GPS applications. RTCA DO 160D operating standards including direct effects lightning. GPS 1575.42 MHz - 28.0 db Gain P/N 11-06796 .........$589.00
COMDAT VHF/GPS/XM (CI 2480-400) - Frequency 1575.42 MHz 26.5dB Gain GPS 2332.5 - 2345.0 MHz XM WX 118137 MHz VHF VHF, GPS and XM Weather Data in a single, combined antenna. Built-in 80dB low pass filter protects both GPS and XM antennas against unwanted VHF interference. 26.5dB GPS amplifier. Helicopter rated. P/N 11-05853 ......$1,038.00 COMDAT VHF/GPS/XM (CI-2680-400) - Triple function VHF/ GPS/XM Weather antenna for twin and light jet aircraft. Certified FAA TSO C144 for GPS and GPS WAAS Class Gamma 1 equipment. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. Not compatible with most portable receiver systems. VHF 118-137 MHz GPS 1575.42 MHz / 26.5 dB Gain XM 2332.5 - 2345.0 / 30 dB Gain P/N 11-06786 .........$995.00 COMDAT ANTENNA (CI 2680-500) - Frequencies VHF 118137 MHz XM 2332.5 - 2345.0 30-34dB Gain. VHF/GPS/XM For twin and light jet aircraft. Provides 80 dB of VHF harmonic suppression. Requires Avidynes DC50 coupler switch for dual VHF/Data Link functionality. Certified FAA TSO-C144 for GPS and GPS WAAS Class Gamma 1 equipment. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. P/N 11-05855 ......$1,182.00
COMANT SPLITTER (CI-5120) DUAL VOR/ LOC/ GS - 108-118 MHz & 329-335 MHz. For use with Garmin GNS 580 and similar systems. Splits single coax antenna input into equally proportioned VOR/ LOC/GS outputs. P/N 11-06826 .........$197.95 CI-502 Dual VOR Coupler Allows the simultaneous use of two VOR receivers from one VOR antenna. P/N 11-17975 ............... $148.95 CI-503 Dual GS Diplexer Permits operation of two glide slope receivers from one glide slope antenna. P/N 11-17976 ............... $137.95 CI-505 VOR/GS Triplexer Permits operation of two NAV & one glide slope receiver from 1 VOR/LOC antenna. P/N 11-17977 ............... $159.95 CI-507 Single VOR/GS Diplexer Provides the operation of one VOR and one glide slope receiver from one VOR/GS antenna. P/N 11-17980 ............... $137.95 CI-509 COMANT COUPLER MARKER BEACON - Permits the use of two marker beacon receivers from one marker beacon antenna. P/N 11-06852 ............... $137.95 CI-601 COMANT DUPLEXER - Designed to provide operation between two transceivers and one antenna. P/N 11-06827 ............... $924.00 CI-1125 VOR/GS Quadraplexer Permits operation of two NAV & two glide slope receivers from 1 VOR/LOC antenna. P/N 11-03777 ............... $191.95
TO PS BV
635
DM C63-3/A ANTENNA
Custom designed templates improve the antenna sealing process, making it more precise, efficient and cost-effective. Each Sealing Guide template is custom designed to correspond to an individual antenna. They consists of 2 pieces, one inner part and one outer part. The inner template adheres to the base of the antenna, the outer template is placed on the body of the aircraft surrounding the antenna. Sealant is applied to the gap between the templates. Sealant is applied to the gap between the templates. When the templates are removed and discarded, the sealant is left to cure, resulting in a clean, precise and smooth seal. Each template is custom designed to correspond to an individual antenna. You will no longer need to laboriously cut and paste various lengths of tape, trying to fit them around the irregular antenna shape. The Sealing Guide template consists of 2 pieces, one inner part and one outer part. Application is simple. The inner template adheres to the base of the antenna, and the outer template is placed on the body of the aircraft surrounding the antenna. Sealant is applied to the gap between the templates. The templates are then removed and discarded. The sealant is left to cure, resulting in a clean, precise and smooth seal. Incorporating the Sealing Guide system into your sealing process will significantly reduce labor time. For use with the following antennas: CI-105-9, CI-105, CI-105-16, AV-74 CI-105-3 CI-100 Series, CI-105-6, CI-105-7, CI-110-40 Series, CI-110-41 Series, CI-110-60 Series, CI-11061 Series, S65-5366-850L, S65-5366-890L, S655366-2L, S65-5366-3L, S65-5366-7L, S65-5366-8L, S65-5366-10L, S65-5366-10LC, S65-5366-11L, S65-5366-116L, S65-5366-119L, S65-5366-144L, S65-5366-145L, S65-5366-168L, S65-5366-4 Series, AV-741, DM N150 Series, DM N170 Series CI-275-2, CI-275-5, CI-310-20, CI-310-22, CI-310-25 CI-305 CI-105-20, CI-105-22, CI-105-24, CI-105-25, CI-150-250-L CI-118-10, CI-118-1, CI-118-9, CI-118 CI-200, CI-175 CI-121, CI-122, CI-177, CI-177-1, CI-177-13, CI-177-3, CI-177-4, CI-177-20, CI-291, CI-292-1, CI-292-2, CI-292-3, CI-292-4, CI-222, CI-222-1, CI-4510, CI-317, CI-317-1,CI-405 Active Series, CI-405-26 Active, AV-10, AV-14, AV-17 CI-248-5, CI-248-30, CI-248-180, CI-2480-100, CI2480-101, CI-2480-200, CI-2480-201, CI-2480-204, CI-2480-206, CI-2480-300, CI-2480-301, CI-2480-304, CI-2480-400, CI-2480-401, CI-42010, CI-420-16, CI-420-220, CI-420-221, CI-420224, CI-420-230, CI-420-420, CI-420-421, 2.704.40, 110-338 CI-401 Series ACT, CI-401 Series PAS, S67-157516, S67-1575-52, S67-1575-82, S67-1575-132, S67-1575-133, S67-1575-134, S67-1575-135, S67-1575-145, AV-GPS, DM N1021-1 CI-145, CI-2680-500, CI-2680-400, CI-2680-401, CI-119, CI-138, CI-139, CI-196 CI-119, CI-138, CI-139, CI-145, CI-145-1, CI-196, CI-238 CI-211, CI-211-1, CI-211-1-L, CI-211-16, CI-211-L CI-408-20, S67-1575-20, S67-1575-39, S67-1575-49, S67-1575-59, S67-1575-14, S67-1575-76, S67-1575-86, S67-1575-98, S67-1575-96, S67-1575-136, S67-1575-863, S67-1575-109, S671575-137 CI-108, CI-108-1, CI-108-1-L, CI-108-L CI-164, CI-165 Part No. Price 11-06653 $23.85 11-06653 $23.85
11-06656 $25.85
11-06658 $26.95 11-06660 $25.85 11-06666 $26.95 11-06662 $36.75 11-06663 $26.95 11-06665 $26.95
11-06666 $26.95
Blades are low profile antennas which incorporate high side load strength, a sealed construction against water and Skydrol, and lightning protection circuits. Reduced maintenance costs. P/N 11-08338 ..........$232.95
11-06670 $30.95
636
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
RA MILLER TRANSPONDER/DME ANTENNA (AV-74) Constructed of an acrylonitrile-styrene-acrylic (ASA) shell. Supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for Comants model CI-105. Application: DME/Transponder Frequency: 960 to 1220 MHz Impedance: 50 Ohms Nominal VSWR: 1.5 to 1 Maximum Connector: Type BNC Female Max Weight: 0.2 lb Max Height: 3.4 RF Power Capacity: 2.5 kW Peak P/N AV-74 .............................$108.95
VHF DIPLEXER COUPLER - Splits the signal from a single antenna into two NAV receivers; eliminating the need for a second antenna. Application: Navigation Frequency: 108 to 118 MHz Impedance: 50 Ohms Nominal VSWR: 1.4 to 1 Maximum Connector: (3) Type BNC Females Max Weight: 3.5 oz Insertion loss: 3 dB Avg / 5 dB Max Isolation: 30 dB Minimum Dimensions: 2 x 1-3/3 x 1-1/8 RF Power Capacity: Receive only P/N AV-547 .............................$92.50
VHF DIPLEXER SPLITTER- Splits the signal from a VOR NAV antenna into NAV and glide slope receivers. Application: Navigation & Glide Slope Frequency: 108118 & 328-335 MHz Impedance: 50 Ohms Nominal Connector: (3) Type BNC Females Max Weight: 3.5 oz Filtering: 30 dB Min / 40 dB Avg Insertion loss: 1 dB Maximum Isolation: 38 dB Min Dimensions: 2 x 1-3/3 x 1-1/8 RF Power Capacity: Receive only P/N AV-570........................... $97.75
637
CM WP ME HA AP LG EP CS IN EL AV TO
Watts
ANTENNA DM N4-17/N - VOR/ LOC/GS BAL. LOOP SYSTEM (DM N4-17/N) Single Output -- Frequency VOR/LOC 108-118 MHz -- GS 329335.3 MHz Frequency Range: VOR/ LOC 108-118 MHz GS 329-335.3 MHz VSWR: 5.0:1 max Polarization: Horizontal Radiation Pattern: VOR/ LOC Omnidirectional GS Forward Pointing Gain: 0 +/- 2 dB Impedance: 50 Ohms Lightning Protection: dc short Weight: 1.32 lbs Connector: BNC Female Cable Length: 27 inches Side Load: 17 psi FAA Approval: C34e, C36e, C40c D0138 ENV. CAT. AA5XXXXXHDXS P/N 11-05859 .................$956.00
CABLE ASSEMBLY AV-6 Cable assembly consisting of 50 foot of RG-58/U low loss transmission line, a PL-259 connector at one end and a BNC male connector at the other. Commonly used with the P/N 11-06992 ..............$65.75
VEHICLE COM ANTENNA AV-3 - is a low profile snap-in mounting quarterwave antenna for use on surface vehicles. It has a solderless cable connection at the antenna and is supplied with 12 feet of cable and PL-529 connector. Application: VHF Communications Frequency: 118 to 137 MHz Impedance: 50 Ohms Nominal VSWR: 1.5 to 1 Maximum Polarization: Vertical Pattern: Omni-Directional Connector: Type PL-259 Max Weight: 2.50 lb Max Height: 55 Max (field cuttable) RF Power Capacity: 100 Watts P/N AV-3 .........................$83.50
ANTENNA AV-741 - Designed for use with ANTENNA AV-12 - is a VOR receive only antenna which uses a highly efficient technique of molding the elements directly into a high-impact thermo-setting bakelite center insulator. A 25 ft cable with integral balun is also supplied. with the AV-12L Application: VOR Receive Only Frequency: 108 to 118 MHz Impedance: 50 Ohms Nominal VSWR: 2.2 to 1 Maximum Connector: N/A Max Weight: 5.5 oz (14 oz with cable) Width Across Tips: 29-1/2 RF Power Capacity: Receive only P/N AV-12 ............................$162.95 P/N AV-12L ...........................$195.95
DME/Transponder sets. Constructed from an aluminum casting which is capable of withstanding particle erosion at high speeds. Designed to operate at speeds up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.35 lb @ 250 mph. Application: DME/Transponder Frequency: 980 to 1220 MHz Impedance: 50 Ohms Nominal VSWR: 1.4 to 1 Maximum Polarization: Vertical Pattern: Omni-Directional Connector: Type Max Weight: 0.5 lb Max Height: 3.3 RF Power Capacity: 4 kW Peak, 0.1 kW continuous P/N 11-06995 .................$322.95
ANTENNA AV-15 - Used with aviation, land mobile radio QUICKIE ANTENNA KIT - Simple
installation procedure produces excellent communications antenna. Order additional kit for navigation antenna. P/N 11-09800 ...........................$18.50 Toroids Only - Used in our quickie antenna kit for composite aircraft. P/N 11-09900 .......................$0.78 ea. and flight phone bands. Chrome-plated ball tip provides low noise static discharge. Designed to operate at speeds up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.75 lb @ 250 mph. P/N 11-06993 .................$137.95
ANTENNA AV-64 - Marker beacon antenna designed for very low drag. Supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.22 lbs @ 250 mph. P/N 11-06994 .................$115.95
PS BV
Kit is an economical replacement for the Cessna factory style antenna used on all the smaller Cessna aircraft. This antenna will work on most aircraft except those with a moveable tail such as the Mooney. Replacement Kit ................. P/N 11-12300 ...................$23.50 For new installations .......... P/N 11-02655 ...................$33.95
ANTENNA AV-530 - Designed for broadband communications. Has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. Supplied with a weather-sealing gasket and mounting hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. P/N 11-06696 .................$154.95
638
ANTENNAS
Designed by Bob Archer utilizing concepts common to military aircraft and space vehicles. The antenna performance is superior to most in use today in private aircraft. Antennas must be installed in accordance with the installation instructions. These antennas are designed to be installed inside fiberglass or other non-conductive wing tips or tail caps of metal or other conductive material aircraft.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
to fit inside larger fiberglass wing tips on metal (conductive that is) airplanes such as T-18s, RVs Bonanzas etc. The wing tips must have internal dimensions of at least 11x24 and generally fit better on the bottom surface. The VSWR is normally less than 2.0:1 over a frequency band of 108-127 Mhz but could be higher due to installation factors. Left Side ..............P/N 11-21015-1 ........ $94.50 Right Side ............P/N 11-21015-2 ........ $93.75 MODEL 1A Wing tip Com antenna. looks the same as Model 1 above and fits the same tips as those above but tuned for the Com band. Offered because of pressure from RV builders. Does not perform as well as Model 2 Com antenna but users report good communications at ranges greater than 50 miles. Should be installed so that the maximum height of the tip is utilized to get the most vertical polarization. Left Side ..................P/N 11-21016-1 .....$93.75 Right Side ................P/N 11-21016-2 .....$95.00 MODEL 2 - Tail cap Com antenna for metal conductive airplanes installed inside a tail top fiberglass fairing with inside dimensions of at least 10 high x 12 long. VSWR is normally less than 2.0:1 over a COM frequency band of 118-136 Mhz. Left Side......................P/N 11-21020 ........$93.75 MODEL 3 - Wing tip VOR antenna of same general design as the Model 1 but of a narrower design to fit Mooney tips with internal dimensions of 8 x 24. VSWR less than 2.0:1 over the frequency band of 108 to 118 Mhz. Left Side ................P/N 11-21010-1 ...... $95.00 Right Side ..............P/N 11-21010-2 ...... $95.00 MODEL 4 - Wing tip VOR antenna designed for smaller tips than Model 3 and with a 10 degree flare on the top portion and a curled aft portion. VSWR less than 2.0:1 over the frequency band of 108 to 118Mhz. Right Side ............ P/N 11-21025-1 ....... $94.50 Left Side .............. P/N 11-21025-2 ....... $93.75
STYLE 1 OR 2 ANTENNAS
NOTE: Wingtip antennas come in RH and LH types. The -1 suffix indicates the installation of the antenna on the lower inside surface of the left wingtip or the upper inside surface of the right wingtip. The -2 suffix indicates the installation of the antenna on the upper inside surface of the left wingtip or the lower inside surface of the right wingtip. The Air Whip uses a unique common-mode inductive core made of VHF ferrite material to isolate the feedline from the main body of the antenna. There is no need to provide a groundplane as is the case with ordinary quarter-wave whips. A better antenna for Ultralight and Light Sport Aircraft. Highperformance half-wave end-fed design. Pre-tuned, ground-plane-freeperfect for composite/fabric aircraft. Installs in minutes without soldering or drilling on any inside surface. High-efficiency, wide bandwidth = greater range and clarity. Pre-wired mil-spec BNC connector - ready to plug-and-play. Receives VOR with appropriate radio. COM/VOR ............ P/N 11-03018 ....$128.95 These VHF antennas are stainless steel including all hardware. Insulators are made of Delrin, which resists extreme cold or high temperatures and is non-breakable. Antennas are available in straight and 45 or 90 angles. 118136 mHz range. Weight: 3 oz. Not FAA approved. Straight ........... P/N 11-04516 ... $21.50 45 .... P/N 11-04517 ...$21.50 Transponder ... P/N 11-02759 ... $21.50 90 .... P/N 11-00648 ...$21.50
COAXIAL CABLE - RG-58U Tinned copper conductor, solid polyethelane dielectric. Standard cable for radio installations. For experimental aircraft only. P/N 11-04258 ............ $0.58 ft....... $40.60/100ft. TYPE RG-400U Tinned copper conductor, PVC Type IIA jacket. FAA approved for certificated aircraft. P/N 11-09202 . $4.20/ft $357.00/100ft. BNC COAXIAL ANTENNA CONNECTORS FOR RG-58U CABLE
Male .............. P/N 11-03992.........$2.93 Female .......... P/N 11-03993.........$3.50
ANTENNA WIRE
ANTENNA INSULATORS
Used as an antenna ground in composite aircraft. P/N 11-12900..........................$23.90 Used in our quickie antenna kit for composite P/N 11-09900............................$0.78
aircraft.
Replace your rusty antenna Will never rust Fits most high/low wing light aircraft The safest! Ceramic safety insulator Easy to install The finest stainless ADF antenna you can buy Note: Not for Mooney aircraft or any aircraft with a movable empennage. Economy stainless ADF ANT.kit..............P/N 11-12300 .............. $23.50 ADF stainless ANTENNA kit....................P/N 11-02655 .............. $33.95
TED TRANSPONDER ANTENNA - This monopole transponder/DME antenna meets the same specifications and is a direct replacement for the CI-101 and AV-22 antennas. Exceptional performance and value. P/N 11-17995 ..................$17.95
639
AVIONICS TOOLS
KLEIN WIRE STRIPPERS / CUTTERS 26-20GA ROUND BARREL CRIMPER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Klein wire strippers and cutters cut, strip, gauge and loop a wide range of wire types and sizes. Made of strong, hardened steel with comfortable handles, these tools are durable and long lasting. Part No. Description Price
4-Way Indent Tool, Round Pin, 20-26 AWG, RS232 D-sub. High-grade steel construction for outstanding performance. P/N 11-08685............$166.95
The Daniels AFM8 is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. Originally developed for the Air Force, the AFM8 meets the need for a miniature tool accommodating wire sizes 20 thru 32 AWG. The cycle controlled precision ratchet assures consistently accurate crimps every time. The tool has a built-in eight step selector knob for ease in dialing the correct crimp depth setting for the wire being used. P/N 11-04443 ......................... $299.75 The Daniels AF8 has virtually limitless application within the specified wire range of 12 thru 26 AWG. Over 1,000 turret heads or positioners are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The eight impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. The precision ratchet controls cycling on the tool in both directions of handle movement. This assures the same, accurate crimp every time. Its like having a quality control inspector at every work station. P/N 11-04442 .......................$283.95 The PRO-CRIMPER II Hand Tool provides the versatility of general-purpose service of generalpurpose service tools along with the reliability and ease of use of many premium-grade tools For versatility, 75 die sets (available separately) are interchangeable, including those for open-barrel contacts and terminals. Additionally, many of these die sets have multiple cavities for crimping a variety of contact or terminal sizes. Pro Crimper II 58433-3...................P/N 12-01379 .......... $174.95 O-Crimp Die 58435-1 .....................P/N 12-01380 .......... $173.95 Hex Crimp Die 58436-1..................P/N 12-01381 .......... $188.95 Pin & Socket 58495-2 ....................P/N 12-01382 .......... $169.95 This tool is designed to crimp insulated and noninsulated 10 to 20 AWG solderless terminals & connectors. It has easy-to-read tool markings to identify the insulated or noninsulated crimping dies. Its tapered nose design works well in tight places and has specially hardened cutter in th nose for quick, clean cuts. Size: 9.75. Lifetime warranty. .............................................. P/N 12-00698 .................. $36.50
Strips 16 to 26 AWG stranded wire, easy-to-read 12-00234 wire gauge markings, comfortable handles with cushion ridges.
$12.95
Solid and Stranded. Double-dipped comfort grips with curved handles, cuts, strips, loops and gauges 12-00236 20-30 AWG solid wire and 22-32 AWG stranded $18.90 wire, cleanly shears 6-32 & 8-32 screws, coil spring provides fast, self-opening action.
Solid and Stranded. Double-dipped comfort grips with curved handles, cuts, strips, loops and gauges 12-00235 10-18 AWG solid wire and 12-20 AWG stranded $19.75 wire, cleanly shears 6-32 & 8-32 screws, coil spring provides fast, self-opening action.
Strips 10 to 18 AWG solid wire, easy-to-read wire 12-00233 gauge markings, comfortable handles with cushion $14.75 ridges.
CRIMPING/CUTTING TOOL
This handy tool gives you a fast, drum-tight, mirror smooth finish. Its ideal for heat-shrinkable covering films. Get a professional finish with less time and effort. 1-yar warranty. Features: Includes removeable wide nozzle 1000W heating power Heavy-duty fan motor Textured, composite hand-grip 3-position, hot/cool/off switch Adjustable air intake baffle Wt: 15 oz 5.5 AC power cord w/2prong plug. P/N 12-00527 .......... $27.50 This soft air velocity of this heat gun increases the surface temperature to the required working temperature much faster than conventional heat guns and maintains a higher temperature for faster completion of the application. Features double insulation, two temperature selections of 570F and 1000F, and a unique impact resistant heating element. Operates on 120V AC at 11.6 amps. Air volume 14.8 cu. ft. per minute. Wt. 1-1/2 lbs. ....................................................... P/N 09-00354 .................. $99.75
Crimpmaster Crimp Tool Frame Only. 1.26lb. 30-506 Crimp tool ................. P/N 11-08686 .$73.50 Die Set Hex for the 30-506 ... P/N 11-08687 .$53.75
for #22 to #10 AWG (.324mm2 - 5.261mm2) Insulated Ring Tongue Terminals and Splices Features: Provides good and consistent crimp every time, Dies change quickly and easily with a screwdriver, Interchangeable dies provide versatility in a single tool, Cushioned, comfort-grip handles 30-500 Crimp tool .......................................... P/N 11-08688 .........$87.00 Die set 26-16 AWG for 30-500 tool ............... P/N 11-08689 .........$46.75 The DMC HX4 Crimp tool features a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on this model, thus eliminating the cost associated with maintainaing and calibrating bulky inventories of single purpose tools. Length: 11 Weight: 11 oz. H4X Crimp Tool ..................................................P/N 11-08690 ..$257.95 Die set 5-24 AWG...............................................P/N 11-08691 ..$155.95
3/32" Ballpoint Hex Socket Driver for use on hex head screws and nuts. *This tool is commonly used with most avionics units like Honeywell Bendix/King and Garmin. P/N 12-02063 .................. $4.65
Quick Shot is a compact, rugged binder type manual which shows detailed wire pin-outs for a wide variety of general aviation avionics equipment. Each page is removable and very durable. The wiring diagrams in Quick Shot Volume 1 include Apollo/UPS, Bendix, Garmin, Icom, Sandel Mid-Continent, Sigtronics, United, Telex, David Clark, PS Engineering, Narco, Val, and many more. P/N 11-01623 ........................... $56.50
Suggested Crimp Tool for RAYCHEM Heat Shrinkable Crimp Butt Splices. P/N 11-08692 ................$153.95
640
INTERCOMS
AVCOMM AC-2EX PORTABLE INTERCOM
Expandable, stereo and portable AvComms new AC-2EX may possibly be the only intercom you will ever need! Measuring a mere 5.1 by 2.85, the AC-2EX is designed to produce powerful communications you can depend on. The compact design makes it easy to carry in your flight bag, a feature pilots who rent aircraft will especially appreciate. Need 4 positions? Simply add the AC-2XM module to accommodate additional passengers. FEATURES: AVCOMMs Expandable Portable: 2 to 4 place Rugged compact design Two 9V batteries with quick access or 12-28V DC power Stuck mic indicator & Power-transmit LED For use with mono or stereo headsets Pilot priority PTT Fail safe feature Wt: 14.1 oz. Full 3 year factory warranty. AC-2EX intercom ........P/N 11-02264 .........$196.95
Skycom 200 Portable Intercoms measure just 2.25x1.38x 2.75. Features adjustable volume and squelch, y-adapter for 2 PTT switches & uses 9V battery power. * The skycom 200 4-place (11-11865) comes with a 2-place intercom and a 5 foot extension cable that connects to another 2-place remote intercom for passengers in the backseats.
CM WP ME
SkyCom 200 2-Place Intercom ......................P/N 11-11860 ....... $96.50 SkyCom 200 4-Place Intercom ......................P/N 11-11865 ..... $118.95
SKYCOM 400 PORTABLE INTERCOMS features dual volume controls, pilot/crew/pass, pilot/co-pilot isolate, auxiliary music input & 9V battery or cigarette liter operation. SkyCom 400 4-Place ....................... P/N 11-11875............... $149.95
HA AP
MultiComm is the first complete, fully-integrated multi-function intercom, radio-interface and power supply system for ultralights and lisght-sport aircraft. With its unparalleled low-noise operation, rich sound quality and unique operating features, you now - finally - have the cabin sound you always wanted. Includes everything you need to get up-and-running, prewired and plug-and-play. MultiComm has multi-pass active and passive filters in the intercom and power supply to take all the noise out, while optimising the voice bandpass for maximum speech intelligibility. MultiComm is unique in providing four distinct operating modes to give you independent control over each individual mics activation for both intercom and radio in a variety of combinations. Radio sidetone feeds your transmitted audio back to your headphones, confirming that you are transmitting as expected and allowing you to adjust your speech for maximum effectiveness. P/N 11-05791 .........$547.00
Two place portable/built-in expandable intercom with outstanding, clean stereo sound. Individual squelch circuits and PTT jacks. Stuck mic warning (visual and audio alarm). Automatic failsafe pilot communication to radio with loss of power to the intercom. Accessory inputs for Stall Warning, Altimeter Alert, Collision Avoidance & Engine Monitor, etc. (for built-in use). Standard cell phone interface. No deterioration of sound as battery weakens Powered by two 9V batteries. Auxiliary power input (on the side). Automatically compatible with mono or stereo headsets or a mix. Optional mounting flanges allow installation in ultralights and LSA. Anodized aluminum case. Additional features include Mil-Spec quality cabling, music input for MP3 players, CD, etc. and auto music muting with manual override. 3-year warranty. DRE Stero Intercom ................................. P/N 11-09576............$366.95 DRE-205E Aux. Power Cord .................... P/N 11-09585..............$14.75 DRE Aux. Power Cord Ol Style ................ P/N 11-09586..............$13.50 DRE-205E Mounting Brackets.................. P/N 11-09577..............$12.50
PS Engineerings renowned voice activated intercom (VOX) eliminates clipped words and shouting. Other features include individual volume and squelch controls for the pilot and copilot. Independent microphone circuits allow individuals who are speaking to be heard, and keep background noises shut out. Music can be added to the intercom for in-flight entertainment. Automatic muting when the intercom is active, or intercom and radio (PM 1000II-series) ensures uninterrupted communications. PS Engineerings SoftMute gradually returns the music to the original level when conversation stops. Although monaural, the music fidelity is still excellent. In most airplanes, you wont notice the lack of stereo separation. The PM 1000 is an effective 2-place intercom, with individual volume and squelch controls, while the 4-place PM 1000II adds a transmit indicator lamp, and music muting during radio traffic. The PM 1000II, 11-11922, has pilot isolate mode that allows the pilot to concentrate on flying, while the passengers enjoy music and conversation. The PM 1000II with CREW mode (P/N 11-11920) allows for separate intercom for the pilot and copilot positions, as well as separate music sources for front and back. On all PS Engineering intercoms a wire harness must be done by PS Engineering or a PS Engineering dealer or warranty is void. For a quote on 11-11922 PM 1000II with out crew wire harness , on 11-11920 PM 1000II with crew wire harness, or on 11-02553 please call 800-826-3160. Specifications: Height: 1.25 inches, Width: 3.0 inches, Depth: 5.50 inches, Weight: 12 ounces, Power Requirement: 12-24 VDC, Warranty: 1 year, Unit is TSOD PM1000II 4-Place Intercom .................... P/N 11-11922 .........$309.95 PM1000II-w/Digital Recorder .................. P/N 11-11906 .........$419.95 6-pl. for expansion module...................... P/N 11-02555 .........$399.95 PM1000II-w/ Internal Crew ..................... P/N 11-11920 .........$449.95 PM1000II-w/Crew & Recorder ................ P/N 11-11908 .........$479.95 PM1000 2-pl. for dual audio panels ........ P/N 11-02553 .........$429.95 Jack Kit (4-Place) ................................... P/N 11-11910 ...........$35.00
LG EP CS IN EL AV TO PS
An Audio Mixer is Required any time there is more than one Audio Source. This unit mixes and amplifies six audio inputs. Mounts behind the instrument panel. For Example: * Communications Radio Audio * Navigation Radio Audio * EFIS Warning Audio * Music Player Audio * Traffic Warning Audio Specifications * Aux. Audio Input * Compact (2.5 X 3.4 X .6), Lightweight (2.1 oz) * 12-28 Volt Compatible * No Special Tools Required For Installation P/N 10-03427 ..............$84.75
Our Four place intercom is packed with features only found in much more expensive units. * Failsafe feature for pilot in the event of power loss * Pilot isolate switch * Oprates on one 9 volt battery * Adjustable squelch (mute) * Voice activated (VOX) * Built in push to talk switch * Music in / Record out jacks P/N 13-06088 ..........................$106.75
BV
641
INTERCOMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Aerocom III is a 2-place stereo portable intercom with IntelliVox, a completely automatic VOX squelch. Each microphone computes the difference between speech and cabin noise. It opens instantly when somebody talks and only the microphone spoken into is active. This prevents unwanted background noise from entering the audio system. Powered by a 9V battery (10 hrs of use) or aircraft power. Features low battery alert. By using external push-to-talk buttons (not included), both the pilot and copilot positions have the ability to transmit over the aircraft radio. The aerocom III will route stereo music to the headsets through the optional music cable. The music automatically mutes when there is intercom activity or radio traffic.There are two modes controlled by a top-mounted switch. In ALL mode, both positions hear radio communications, music, and have intercom capability. In the ISO mode, only the pilot side is connected to the aircraft radios, without intercom or music distractions. The copilot position continues to have music, and intercom communications with an expansion unit if installed.The aerocom III is expandable to 4-places with the Aerocom EX expansion unit available by special order. This contains separate music input and dedicated IntelliVox processors. Specifications: Size: 4.375l x 3.250w x 1.500h; Wt: 10 Oz.; Power: 9V batt. or 12/24V aircraft power Battery Life: Approx. 10 hrs.; Headphone output: 40m w/channel into 150, < 1% THD; 3dB mic frequency range: 350 Hz to 4500 (to reduce noise); 3 dB music frequency range: 180Hz15,000Hz P/N 11-00427 ...................$299.95 Expansion Unit (adds 2-places) ........ P/N 11-01108 ...................$139.95 The worlds first stereo intercom to be FAA-TSO approved. Available in 4- & 6-place versions. The 4-pl. PM 3000 (P/N 11-11931) features pilot isolate and All reception modes. The PM 3000 6-place (P/N 11-00851) intercom includes a CREW mode. In CREW mode, the pilot & copilot are on one intercom channel, while passengers have conversation on another. Constant squelch adjustments are eliminated with the PM 3000. A single squelch knob controls multiple circuits making the intercom one of the quietest to use, even in the noisiest airplanes. The 6-place PM 3000 provides for two independent stereo entertainment inputs. This gives the passengers and the crew each the option to listen to their music device. The PM 3000 has an automatic fail-safe interconnect to the aircraft systems. If power to the intercom is disrupted, the pilots headset is automatically connected to the aircraft radio. With the PM 3000 installed, both pilot and copilot have transmit capability over the aircraft radio. A 2-color LED shows green when power is on, and red during radio transmissions. This feature acts as a stuck microphone indication. On On all PS Engineering intercoms a wire harness must be done by PS Engineering or a PS Engineering dealer or warranty is void. For a quote on the PM 3000 4 place or 6 place please call. PM 3000 4-Pl. Stereo Intercom (w/o digital recorder) single music input. Installation hardware includes four sets of headset jacks, a music jack and reversible (horizontal and vertical) metal mounting plate. P/N 11-04843 ...$419.99 PM 3000 4-Pl.w/ digital recorder w/o Crew ...... P/N 11-02556 ...$539.95 2-1/4 Mounting plate (w/o crew)...................... P/N 11-00394 .....$17.95 PM 3000 6-Pl. Stereo Intercom (w/o digital recorder) dual music input. Installation hardware includes six sets of headset jacks, two music jacks and reversible (horizontal and vertical) metal mounting plate. P/N 11-00851 ...$549.95 2-1/4 Mounting plate (w/ crew)........................ P/N 11-00393 .....$17.95 PM 3000 6-Pl. Stereo Intercom (w/digital rec.) P/N 11-02557 ...$639.95 or the pilot who is interested in the basics and then some, the PM501 panel mount inter- com provides the pilot with standard features along with a few features found in more expensive systems.This four channel intercom features individual power output amplifiers for each headset, true pilot isolate for uninterrupted radio communications, music input w/ unprecedented high monaural music input, music muting during ICS communications w/ soft mute for easy listening entertainment, & PS Engineerings top quality squelch circuit. *The PM 501 does not come with jacks. For a quote on the wiring harness please call. Specifications: Height: .90 inches, Width: 2.60 inches, Depth: 4.85 inches, Weight: 8.5 ounces, Power Requirement: 12-24 VDC, Unit is not TSOD P/N 11-11800 ....$269.95
he PM 1200 is a 2-place panel mount intercom designed for the loudest of aircraft. If you fly Warbirds or other extremely noisy aircraft, PM 1200 is perfect. Incorporating IntelliVox with our new Active Mic Processor (AMP), the PM 1200 dynamically reduces noise inadvertently picked up by the Mic. It also supplies up to 120mW of headset audio. On all PS Engineering intercoms a wire harness must be done by PS Engineering or a PS Engineering dealer or warranty is void. For a quote on the PM 1200, or the PM 1200 blind mount click here. Specifications: Height: 1.25 inches, Width: 3.0 inches, Depth: 5.50 inches, Weight: 12 ounces, Power Required: 12-24 VDC, Warranty: 1 Year, Unit is not TSOD P/N 11-01671 .....................$429.99 The SCI-4 from Sigtronics features dual squelch indicator lights and dual volume and squelch controls to control volume and squelch independently for front and back seats, crew/pilot isolate and pre-wired harness for easy installation. The SCI-4 is RFI and EMI immune and measures only 1x 2.5. Includes all hardware and jacks needed for installation. SCI-S4/S6 Intercoms have the same features as SCI-4/6 Intercoms plus music inputs. 5-yr warranty. Made in USA. SCI-4 4-place .................................P/N 11-00027 .............$349.00 SCI-6 6-place .................................P/N 11-00028 .............$379.00 SCI-S6 Stereo 6-place ...................P/N 11-00425 .............$479.00 SCI-S4 Stereo 4-place ...................P/N 11-00424 .............$450.00
5-year warranty and a sure-fit for all students, instructors and aircraft renters. All have a music input and Aux output for recording lessons and radio communications. Both pilot and co-pilot positions have PTT jacks. Powered by an internal 9V battery (included), good for 40 hours of operation in airplanes lacking a cigarette lighter socket. A 4 Aux power adapter is included. When using the power cord, the battery is by-passed, preserving the life of the battery. The 2-place SPO-22, 4-place SPO-42 and 6-place SPO-62 are compatible with all standard aircraft headsets. The 4-place and 6-place models have a satellite box for rear seat positions to keep unwanted headset cords out of the pilots way. A special HIGH-NOISE model, perfect for Ultra-lights and Kit aircraft, is available in all configurations. It filters out background noise, lowers the input level at mic amp, increases output signal, and mic interface can be modified to interface with Icom radios. Also features a sidetone modification. Made in USA. For 2 People (Standard) .....................P/N 11-02794 ........ $187.00 For 2 People (High Noise) ..................P/N 11-02793 ........ $210.00 For Up To 4 People ............................P/N 10-19115 ........ $210.00 For Up To 4 People (High Noise) .......P/N 11-01799 ........ $252.00 For Up To 6 People ............................P/N 11-02798 ........ $244.00 Optimized for the High Noise Environment. Sigtronics 2-place Sport 200 & Sport 200S Intercoms are designed specifically for LightSport and Ultralight aircraft. Tested at ambient noise levels of up to 120dB, their Sport series intercoms will outperform all other intercoms on the market. modes of operation, voice activated squelch and push to intercom perfect for open cockpit aircraft, give the Sport 200 intercoms maximum flexibility and performance. To this they added special internal circuitry to optimize the intercoms for the most demanding high noise environments. Use Satellite Radio, MP3 or CD players as your audio source with stereo headsets for true stereo sound. With full or partial music muting for intercom and full mute for radio reception and transmission, you will be able to enjoy your music and never miss a radio call. Size: 1 x 2.5 x 4deep. For even more convenience you can mount the intercoms horizontally or vertically. All hardware including headphone and microphone jacks are included with these easy to install intercoms. Weight: 4.5 oz., Jacks & wiring harness: 5.5 oz.; Input power: 11VDC - 32VDC; Current: 0.06 am SPORT 200S Stereo panel mount int. .......P/N 11-02885 .........$279.00 SPORT 200 Intercom .................................P/N 11-02884 .........$199.00
Offers the simplicity of IntelliVox- automatic intercom squelch. Designed with the kit and homebuilt in mind, the PMA 4000 has 2 Com and 2 Nav inputs, along with 4 additional unswitched inputs. The PMA 4000 is a monaural 4-place intercom. A speaker amplifier is included. The copilot volume control can also be remote controlled, for tandem aircraft. On all PS Engineering intercoms a wire harness must be done by PS Engineering or a PS Engineering dealer or warranty is void. For a quote on the PMA 4000 harness please call. PMA 4000 w/o Recorder ...P/N 11-01634 .........$775.00 2-1/4 Mounting plate ........P/N 11-00395 ...........$19.95
This new faceplate fits the Sigtronics SPA-400, SPA-600 and SBD-800 voice-activated panel mount intercoms. Designed to adapt these compact units to the standard 2-1/4 instrument hole, the new printed bezel increases mounting flexibility and customer convenience. Made of durable and lightweight ABS plastic. P/N 11-08500 ................$9.95 Ea.
642
INTERCOMS
Measuring only 1 x 2-1/2 x 4 deep, only 4.5 oz, the SPA-400 and 6-place SPA-600 are FAA TSOd and can be mounted either horizontally or vertically. Also available in special HIGH-NOISE model SPA-400N for Ultra-lights, and open cockpit aircraft, kit aircraft and warbirds. The se intercoms allow you to put push-to-intercom buttons in the aircraft to eliminate VOX mode when desired. This is especially good for opencockpits where wind noise can be a problem. The SPA-400N simulates side-tone because some radios that are currently used in these markets do not have it. The SAS-440 and SAS-640 intercoms feature Sigtronics exclusive Auto-Squelch. One touch of the squelch button and the intercom perfectly sets the squelch level to your headsets and the aircraft noise level. All Sigtronics intercoms are voice activated with a 5-year warranty and operate on any voltage from 12V to 24V. Made in USA. 2 Thru 4 Way (Standard SPA-400 .........P/N 11-02791 ........ $216.00 6 Way (Standard) SPA-600 ...................P/N 11-02801 ........ $252.00 4 Way (High Noise) SPA-400N ..............P/N 11-02792 ........ $237.00 2 Thru 4 Way (Auto Squelch) SAS-440 .P/N 11-02804 ........ $324.00 6 Way (Auto Squelch) SAS-640 ............P/N 11-02816 ........ $360.00 Retrofit stereo switcher-use with previously installed SPA-400 intercom - RES-401 ..........P/N 11-02796 ........ $129.00
The IIsx is the worlds most popular 2-place, portable intercom. The modular design offers expansion capability to the backseat if needed. * Expandable to 4-place portable with optional SR-4 expansion module * Auxiliary inputs and outputs for music or recording flight information * Low-battery indicator and pilot isolate * Uses aircraft power or 9-volt battery Flightcom IISX 2 place includes: IISX Intercom Cigarette lighter adapter Co-pilot transmit cable Flightcom IISX 4 place includes: All parts in the 2 place SR-4 expansion module Flightcom IISX 2 Place .................................... P/N 11-08700 ...... $99.00 Flightcom IISX 4 Place .................................... P/N 11-08710 .... $138.95 SR-4 Remote Expansion module .................... P/N 11-04260 ...... $30.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The SPA-4S is a 2 or 4 place voice activated intercom with inputs for stereo music. It is a small, compact system that allows it to fit in space critical panels. The SPA-4S uses the industry standard Sigtronics squelch, fast on slow off for hands free communication. The music will full mute during ATC communication and partial mute during intercom communication. Each intercom comes complete with all necessary mounting hardware, jacks, and two 4-foot pre-wired harnesses. The SPA-4S only requires 1 X 2.5 of panel space, mounts horizontal or vertically, is 4 deep, and weights 5.5 oz. The SPA-4S intercom can easily upgrade the SPA-400. The SPA-4S uses the same panel hole pattern and interface cable as the SPA-400. A second cable is provided for the music inputs and headphone outputs. The SPA-4SN is available for the high noise amateur built aircraft. As with all of Sigtronics products, the SPA-4S is RFI and EMI immune. Power: 11-32 VDC. Standard SPA-4S ......................... P/N 11-00567 ............. $289.00 High Noise SPA-4SN ................... P/N 11-00568 ............. $311.00
Stereo intercom features include 6-place capability, instant music muting, and pilot isolate so you could focus on your flight and eliminate backseat chatter. * 3-place transmit capability * Easy to adjust squelch and volume controls * Instant music muting, pilot isolate Specifications: * Weight: 5 oz * Length: 5 * Width: 2.4 * Height: 1.2 in * Not TSOD * Two-year warranty Flightcom 403 intercom includes * 403 Intercom * Connector kit * 6 place stereo jack kit * 2-1/4 hole face plate & vertical/horizontal face plates Switches are provided in installation kit to allow individual headphone positions to select either stereo or mono mode, allowing the use of monaural headsets 403 w/o recorder w/ jack kit ............................ P/N 11-17605 .....$229.00 Stereo input and output jack kit....................... P/N 11-18755 .......$51.75
The 403 is a 6-place panel mount, voice-activated mono intercom. This easy to use intercom is designed to fit almost anywhere in the panel. Includes:* 403MC Intercom * Connector kit * 4 place mono jack kit. Features: * 3-position transmit capability * Selectable muting and pilot isolate * Auxiliary input for music or alerts * Rectangular faceplate can be mounted horizontally or vertically Specifications: * Weight: 3.6 oz * Length: 2.62 in * Width: 2.37 in * Height: 1 in * Not TSOD * Power requirement: 12-28 VDC * Two-year warranty ........................... P/N 11-08755 ....................$149.00 2-place stereo activated intercom enhances the fun of flying, as well as safety, by optimizing communication clarity. Features include 2-place capability, instant music muting, and pilot isolate so you can focus on your flight. Easy to use and designed to fit almost anywhere in the panel. Switches provided in installation kit allow individual headphone positions to select either stereo or mono mode. Weight: 5.0 oz. Size: 5 in. L X 2.4 in. W X 1.2 in. H Power Requirements: 0.16 amp, 12-28 VDC 403LSA P/N 11-07871 ...............................$189.00 Digitally controlled, intercom system suitable for nearly every 2 or 4 place aircraft. Features a full VOX (Voice Activated) intercom with second com ability, music input with muting and the ability to use different branded headsets without compatibility issues. Successfully mated to the leading handhelds as well as panel-mounted Icom, Narco, King and the like. Measuring only 2-1/8 x 1 x 3-7/8 or (53 x 24 x 100mm) and with a panel size of only 1 x 2 1/8 (53 x 24mm), its one of the smallest and lightest intercoms in the world and only draws 60 ma (at 14 V) during operation. Mount horizontally or vertically. No voice clipping. Nothing is lost in conversation between the pilot and passengers and the digital voice control provides clear and crisp communication at all times. Monitors and reduces background noise when the voice circuit is open. One simple DB15 connector is all thats needed, on top of the Intercom is the RS-232 port for future software updates. 2 com inputs cater for a primary airband com and a secondary VHF, UHF or Marine band transceiver. Additional input for CD player, FM Radio or MP3 player is available with auto muting to enable seamless communication in the cockpit. Voltage: 10-30 VDC. 2 yr warranty. P/N 11-02207 ........ $495.00
PA200 Worlds Smallest Portable Intercom. A solid VOX intercom offering clear communications. Adjustable volume control and squelch control allows for easy adjustment for all ambient noise levels. 2 push-totalk switches can be used with the intercom allowing transmission through the radio. Unit is ideal for rental aircraft. PA 200R is also available for motorsports. FEATURES: On/Off volume control Adjustable squelch circuitry Fail-safe capability Y-adapter for 2 pushto-talk switches Powered by one 9V battery (24 hours) Size: 2.25 x 1.38 x 2.75 3-yr unconditional warranty Wt: 8 oz. (227 grams) PA-200T ....... 11-02712 ....$115.00 PA-200IK .....11-11530 ....$130.00 PA-200ET ..... 11-11525 ....$140.00 PA-200IC .....11-03544 ....$130.00 PA exp box ... 11-03541 ......$32.95 PA-200V ......11-03545 ....$130.00 PA-200TA24 . 11-03542 ....$140.00 PA-200TA23 11-03543 .....$140.00 PA-200R ....... 11-03547 ... $130.00 The stereo version PA-400ST intercom is a portable design that has been used successfully in general aviation for over 18 years. No other intercom on the market has the features and capabilities of the PA-400ST intercom. This particular series has been recently modified to include a cell phone jack for your safety and convenience. Before using in an aircraft we recommend that you take a check-ride in your living room and become familiar with all the features of your new intercom. A hook-up diagram is included in this guide along with brief description of each function and each control setting. PA400ST ....................... P/N 11-03548 ..............$175.00
XCOM INTERCOM
4 place portable intercom with pilot isolate capability. Features: Exclusive Electronic Noise Reduction circuits. Up to 110db of Noise Reduction. Continues Audio, No missed Syllables or Words. Built-in Cellular Phone Interface, includes patch cable. Pilot/ All Switch. 9 Volt Battery or External DC Operation, Cigarette Lighter Adaptor included. Auxiliary Stereo Audio Input with Radio Mute and Intercom Audio Mute. Light weight, 10 oz. Push-to-Talk Button for Keying the Comm Radio. Pilot and CoPilot Radio PTT Jacks. Small Size: 5.5 x 1.5 x 3.2 Three Year Warranty ....P/N 11-17669 .......... $260.95
Exclusive Background Noise Reduction Technology Continuous Audio, No Missed Syllables or Words Up to 110db of Noise Reduction Single Volume Control Built-In Cell Phone/Aux Audio Interface 9 Volt Battery Operation External DC Power Jack and Power Cord PTT for Keying Comm Radio Small Size: 4 x 2.5 x 1.5 Compatible with headsets with Electret Microphones Three Year Warranty. P/N 11-09736 ...............................$169.95
643
INTERCOMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The ITC-401-ENRI 2-place intercom features the Enhanced Noise Reduction Intercoms circuit in a basic, small package. With ENRI, the problems common with voice activated intercoms are eliminated. There are no squelch controls to adjust, no automatic squelch circuits that keep changing levels, only one single volume control. ENRI continuously monitors background noise picked up by the headset microphone and eliminates it, even while talking. Excellent for open cockpit aircraft. 9V Battery Operation Pilot/All Switch Available with cable and standard plugs or ICOM A-22, A3 and A4 Cable & Plug 3 year warranty 4L x 2.5W x 1.5D. P/N 11-00544 .........$169.95 ITC-401-23 - Plugs directly into Icom A5 & 23 with out the need for additional cables P/N 11-01005 .........$169.95 ITC-401/1-ENRI - Plugs into Icom A22, A3, A4 with out need for additional cables P/N 11-00825 .........$169.95
The ITC-2003-ENRI features ENRI technology, a unique design, a small panel control unit and a remote intercom unit. The small control panel consisting of a Volume control and a Pilot/All switch measures only 1w x 1.3d x 1h. The second part, the intercom unit is only 4.6x 3.1x 1.7 and included mounting tabs. Because of D.C. switching and control between the panel control and the intercom, the mounting location is not critical. Simply mount the intercom unit in an easy to reach location, run cables to the headphone jacks, power and a small six conductor cable to the panel control unit. The Electronic Noise Reduction feature is exclusive to FlightTech Intercoms and allows for quiet communications without the background noise common to Voice Operated Squelch controlled intercom. With ENRI, the microphones are active at all times, ENRI monitors the background noise and eliminates it allowing only the headset users voice to pass. Power: 12V or 24V P/N 11-00172 .........$365.95 With preassembled 2-place cable ...............P/N 11-00822 .........$365.95
ATC-2P (2-passenger), ATC-4P (4-passenger) & ATC-6P (6-passenger) panel-mounted intercoms are so compact that they fit most anywhere in the aircrafts panel. Designed to mount either horizontally or vertically, these panel-mounted intercoms will fit in any homebuilt, business aircraft, or general aviation aircraft in production today, and offer stereo or mono sound. The panel-mounted intercom has an exclusive Softcomm feature of a back-up battery (9V) that affords power to the Intercom when the aircrafts master power is shut off or fails in flight. The battery is automatically switched off when aircraft power is present and on when absent. The panel-mounted intercom offers SoftComms features of Recorder-In and Recorder-Out. A miniature remote audio panel houses this feature and can be located anywhere the pilot prefers. This allows recording of clearances, flight lessons, enroute weather and flight events. The ATC-2P, ATC-4P, & ATC-6P panel-mounted intercoms come complete with mounting instructions, wiring diagrams, all required microphone and headphone jacks, audio recorder jacks, and bi-directional mounted nomenclature plates. These intercoms are supplied with pre-tested 8 ft. cable assembly terminated into a DB25 pin connector. Size: 1hx2.5wx6d. Power 12Vdc. Wt:6.25oz., 3yr warranty. ATC-2P ...... 2-Place Intercom (mono) ......... P/N 11-11812 .... $199.95 ATC-2PS .... 2-Place Intercom (stereo) ........ P/N 11-02216 .... $212.95 ATC-4P ...... 4-Place Intercom (mono) ......... P/N 11-11822 .... $211.95 ATC-4PS .... 4-Place Intercom (stereo) ........ P/N 11-05313 ....$222.95 ATC-6P ...... 6-Place Intercom (mono) ......... P/N 11-11824 .... $241.95 ATC-6PS .... 6-Place Intercom (stereo) ........ P/N 11-11807 .... $242.95
The MiniVOX two place portable intercom is designed for the student pilot and renter pilot requiring a basic low cost voice operated intercom. Measuring 4 x 2.5 x 1.5, the MiniVOX features adjustable Squelch and Volume controls, on-board Push-To-Talk button and up to 25 hours of operation from a 9V battery. Ease of operation, long battery life and a small size make the the new MiniVOX an ideal entry level intercom. Weighs less than 10 oz. Made in the USA. P/N 11-02126 .........$124.95
The ITC-402P Enhanced Noise Reduction Intercom is a small,easy to install intercom designed for the pilot who flies a two or four place aircraft. Featuring single control volume control operation,the pilot and passenger can enjoy quiet communications on those long cross country trips. The ITC-402P includes a stereo auxiliary audio input.To prevent missing ATC communications, the music is muted when either audio from the communication radio is present or there is intercom audio. The new ITC-404S-P has full auxiliary Stereo in and Stereo out, with dual function muting. Features: Enhanced Noise Reduction Technology No Squelch circuits or controls Size: 2.1w x 1.2h x 3.1l Single Volume Control Operation Pilot/All Isolation Switch Pilot and Copilot Push-to-Talk Switch Inputs Stereo Music Input w/Muting 12 to 28VDC operation.Cellular Phone interface, include phone cable.
Description Part No. Price Electronic Noise Reduction Intercoms ITC-404SP 2-place portable intercom w/ENRI w/ cables and jacks 11-00926 $219.95 4-place stereo intercom panel mount Note: Will ITC-404SP 11-01354 $279.95 not work w/ the unamplified dynamic mic. Model
ITC-401TC is different from the rest of the ITC-401 series in that the Noise Reduction control is located on the front of the intercom, rather then an internal Set and Forget adjustment The ITC-401TC is available in versions with cables and plugs for panel mount jacks as well as handheld radios and they include the following: ITC-401TC, Standard cable and plugs for panel jacks P/N 11-03201 ........................$169.95 ITC-401TC-1, Cable and plugs for the ICOM, A22, A3, A24, & A P/N 11-03202 ........................$169.95 ITC-401TC-23, Cable & plug for the ICOM A23 & A5 P/N 11-03203 ........................$169.95
Ideal for the renter pilot or as a permanent intercom without the installations concerns associated with a panel mount intercom. Features: Exclusive Electronic Noise Reduction circuits. Up to ITC- 110db of Noise Reduction. Continues Audio, No missed Syllables 2001- or Words. Built-in Cellular Phone Interface, includes patch cable. ENRI Pilot/All Switch. Specifications: 9 Volt Battery or External DC Operation, Cigarette Lighter Adaptor included. Auxiliary Stereo Audio Input with Radio Mute and Intercom Audio Mute. Light weight, 10 oz. Push-to-Talk Button for Keying the Comm Radio. Pilot and CoPilot Radio PTT Jacks. Small Size: 5.5 x 1.5 x 3.2 Three Year Warranty.
Model ITC-2001-ENRI ITC-402P-ENRI ITC-404SP-ENRI ITC-2001-I Model ITC-404S-P ITC-404S-P ITC-2003 ITC-2003 ITC-404S-P Description Part No. Electronic Noise Reduction Intercoms 2-place portable intercom w/ENRI 11-17668 Same as above but w/ cables and jacks 11-00926 4-place stereo intercom panel mount 11-01354 2 Place Intercom for use with 11-07010 (ICOM A22, A24 AND A6 Radios) Description Part No. Pre-Assembled Cables 2-place Cable 11-01377 4-place Cable 11-01378 2-place Cable 11-01379 4-place Cable 11-01380 Interface Cable 11-01381 Price $232.95 $219.95 $279.95 $234.95 Price $130.95 $138.95 $130.95 $138.95 $29.95
These top quality, economical intercom systems are perfect for any type aircraft and are compatible with any standard headset. Features include automatic on/ off power, panel controls for volume and gain and a pilot isolate switch (ATC-4 only). The intercoms are 9V DC portable or panel mountable with pilot and copilot transmit as a standard feature. These intercoms can be used with other equipment to record instructions or play cassette music. The new model of the ATC-2 has reduced size and weight, and a front-panel mounted PTT switch. The improved ATC-4 and ATC-6 also have a new dual transmit design. All units have aux power cord and stereo cable. With pilot isolate and push-to-talk switch. Model ATC-2T is a 2-place portable intercom designed for the student pilot. It has a recording feature that allows all CFI and ATC instruction to be recorded on a standard cassette player for future study. It is 9V battery powered and is compatible with all general aviation headsets and radios. 2-Place Portable (mono) ATC-2Y ..............P/N 11-05818 ........ $176.95 4-Place Portable (mono) ATC-4Y ..............P/N 11-05819 ........ $184.95 4-Place Portable (stereo)ATC-4S ..............P/N 11-05905 ........ $211.95 These Softcomm Intercoms are specially designed to operate with todays transceivers in mind. The ATC2I models are full featured intercoms with Record-In and Record-out, a PTT switch mounted in the face place and a AUX power input for using aircraft power instead of the 9 VDC battery(S), Listen to CBs, CD players and AM/FM radios while in flight. Features music MUTE circuit, volume control and squelch adjustment. Housed in a rugged ABS case with a space for 2 batteries, these intercoms are compact and fully portable.
Model ATC-2I-A23 ATC-2I-A20 ATC-2I-A22 Description Icom, IC-A23, IC-A5 Icom, Delcom and Bendix King radios Icoms A-22 compact transceiver P/N 11-02217 11-07700 11-07710 Price $175.95 $173.95 $173.95
644
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Used to improve both hearing protection and speech communications. Each earpiece includes a miniature speaker that reproduces speech signals from the aircraft audio system. The replaceable compliant foam tips attach to the earpiece and contain a pathway for the sound to travel from the transducer to the ear. Provides the highest level of hearing protection available by any method including active noise reduction. (ANR) The noise-canceling microphone is a high fidelity noise canceling Electret Condenser microphone. Include a music input in the Volume control box. This button could also be used as a backup in case of other system failures. Balance and comfort are the result of its elegantly simple design. P/N 11-02923...........$525.00 Clarity Aloft Aviation Headsets are the result of our commitment to the highest standards in aviation communications. These headsets contain the most technically advanced components brought together from diverse experts in audio communications. All the features youll love from the original with TSO Certification and additional features like: Music Input. Equipped with a music input in the volume control box that will accommodate most music devices through a 1/8 inch plug. P/N 11-05794...........$695.00 Lets you wirelessly connect to multiple Bluetooth devices for phone calls, music, and more. Tailored Digital Signal Processing gives it the clearest sound available today. Purchase includes: Headset, carrying case, owners guide, starter supply of eartips (package of 12), and 2 AA batteries. Features: Light, low profile headband Full spectrum noise reduction Professional grade microphone with added Digital Signal Processing 2 Bluetooth devices can be linked simultaneously Bring your most used tool into the cockpit your phone can be as indispensible in the air as it is on the ground Enjoy music and movies on your iPod or iPad clear and powerful sound will have you experiencing them like you never could in an airplane before Connect to more than one device - you dont have to choose between your phone and your other devices, giving you the best functionality Seamlessly transition from music to a call the optional autofade will bring down the volume when calls from the radio or phone come in Independently adjust the volume - dual controls allow you to set your cockpit radio volume and the volume from your phone and devices separately at exactly your preferred level Connect with just the sound of your voice - use your smartphones voice-activated dialing feature to let loved ones know when youll be landing. P/N 11-10420...........$795.00
645
LIGHTSPEED HEADSETS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A distinctive new look and continuous innovation make the new Zulu the ultimate blend of design, technology and high performance. The new Zulu once again sets the standard by which all premium ANR (active noise reduction) headsets are measured. Check out these new features! Quiet - With patent-pending Microport Vent technology, the new Zulu offers greater ANR consistency and performance over a deep, broad range of low frequency noise. The magnesium ear cup is superior at blocking out high frequency noise. Comfort - Weighing in at about 13 ounces, the new Zulu Lightcomfort design includes new plush ear seals, exceptional fit and 15% less side pressure. Durability - A low profile, stainless steel headband provides lightweight durability and excellent cabin clearance. Bluetooth Connectivity - The New Zulus full-function Bluetooth connectivity provides enhanced sound quality for voice, music or compatible audio devices. Cell Phone/Music Connection - An integrated control box auxiliary input offers and additional option for connecting a cell phone, music player or other audio device. Front Row Center (FRC) - Concert-class fidelity and sound reproduction come alive in Lightspeeds exclusive Front Row Center feature by automatically adding a dynamic surround-sound quality to music. ComPriority - Never miss important radio communications with Lightspeeds patented ComPrioirty which lowers the volume of an auxiliary device automatically during radio or intercom transmissions. Stereo or Mono - Easily match audio panel inputs with a quick switch to stereo or mono. Description Part No. Price Zulu-Circumaural, Anr, Straight Cord, Dual 11-09692 $900.00 Ga Plugs, Battery Power Zulu-Circumaural, Anr, Straight Cord, Single 11-09716 $900.00 Lemo Connector, Panel Powe Zulu-Circumaural, Anr, Coil Cord, Single 11-09717 $900.00 Lemo Connector, Panel Power Zulu-Circumaural, Anr, Coil Cord, Single 11-09718 $900.00 U-174 Connector, Battery Power Zulu-Circumaural, Anr, Coil Cord, Dual Ga 11-09719 $900.00 Connector, Battery Power Zulu-Custom 11-09721 $900.00
Try on the latest addition to the Lightspeed line of premium headsets for a new flying experience. With the fit, comfort, features, and value youve come to expect from Lightspeed, Sierra is best in class. ANR and Bluetooth connectivity bring top-of-the-line features to Sierra. Plush ear seals and sturdy construction add to Sierras durability. A wired input for audio devices and Auto Music Mute enrich your flying. A reversible headband design allows microphone placement on the left or right. Sierra is everything youve been looking for in a value ANR headset. Features: ANR - Active noise cancellation over a broad range of low frequency noise bring state of the art technology to Sierra. Comfort and Durability - At 16 ounces with plush ear seals and solidly designed ear cups, extended wearing is a breeze. Bluetooth Connectivity - Allows wireless connection from Bluetooth phones. Stereo streaming (A2DP) is not available with Sierra. Music Connection - An integrated control box input allows you to connect a music player. Auto MusicMute - Receiving radio communications is a snap with MusicMute which automatically decreases a music player by 80 percent, lessening the chance of missing important interactions. Power Source and Connectors Two AA batteries, Dual GA. Weight - 16 oz. 5-Year Lightspeed warranty P/N 11-08588 ........................$600.00
3G SERIES ACCESSORIES
Description 1 Soft Leather Seals Music Patch Cord Cell Patch Cord P/N 11-01987 11-01989 11-01990 Price $22.50 $5.95 $7.50
ACCESSORIES
Part Number Price Buy Zulu Head Pad 11-08723 $9.75 Aviator Sunglasses 13-10005 $350.00 Aircraft Spruce accepts the return of most models of headsets for credit towards the purchase of certain high end ANR headsets. Please Call or email our sales team for pricing and availability on trading in your headset at 877-477-7823 or info@aircraftspruce.com. One Headset per trade-in must be complete and in working condition per our inspection.
XL SERIES ACCESSORIES
Description P/N 11-01988 11-01994 Price $19.85 $42.95
No matter how many times you fly, you feel itthat breathtaking taste of freedom as you rise through the clouds and survey the horizon. And now, Lightspeed Aviation has developed the perfect companion to enrich and enhance your flying experience: Lightspeed Aviator Sunglasses. Lightspeed Aviator Sunglasses are the only aviator glasses designed exclusively to fit perfectly with your Lightspeed headset. Designed and made in Italy, the lightweight frames are made with the same flexible spring steel as the Lightspeed Zulu headband. The sleek low-profile design fits gently against your head assuring a solid seal with your Lightspeed headset. And the removable anti-glare, non-polarized flip shaded lenses allow you to quickly transition from un-obscured sunlight to reading maps in a dark cockpit. Now you can fly safer with greater freedom by eliminating the hassle of needing to change from prescription glasses to sunglasses. Simply present your Lightspeed Aviator Sunglasses to your preferred optician. Your optician will use the clear lenses from your Aviator Sunglasses as a production guide for your personalized prescription lenses. Accessories Include: Hard carrying case, soft fabric bag and cleaning cloth. P/N 13-10005.............$350.00
HEADSET ACCESSORIES
Description MACH 1 Wind Screen 2pack Wind Screen - Zulu, 3G, QFRc, XLC Dual headset flight bag P/N 11-00358 11-08575 11-01996 Price $4.95 $3.35 $29.95
646
SIGTRONICS HEADSETS
AIRCRAFT SPRUCE SKYCOM & SKYPRO HEADSETS
SKYCOM II SERIES - Offer a family of
products with a different look, fit and performance from the traditional headset design. While >30% lighter in overall weight, they offer better quieting with greater comfort and P/N 11-08279 user features. They were designed around the best hearing protectors offered in the Industrial Safety world to offer maximum passive noise rejection. The thin, flexible wireframe headband design easily contours to your head, limiting clamping pressure yet maintains a very low profile for canopy clearance. The earseal system offers a larger ear opening with numerous options for type of seal available. The Boom mounts under the cup and is reversible for use on both sides. All models include dual volume controls, Electret N/C mics with adjustable gain, Stereo/Mono compatibility, a carry bag, and a 3 year warranty. Model-specific features include Cellphone interface, and stereo music interface with muting, and ANR performance with a convenient small/inline, 2 AA battery solution. Skycom II: 11 Oz, 24 dB ............................ P/N 11-02658....... $89.95 SkyCom II: with Cell interface .................... P/N 11-08278..... $119.95 Skycom II ANR: Cell/Music w/muting ......... P/N 11-08279..... $229.95
All Sigtronics headsets and intercoms are specifically designed for high-noise environments and are RFI and EMI immune, giving you clear, interference-free transmission even in fabric or composite aircraft or in use with handheld radios.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SKYCOM I SERIES - Was first offered over 10 years ago and is designed around the traditional, oval-shaped headset design used for over 40 years in aviation. It feaP/N 11-09098 tures a steel headband, large headpad, and metal yoke/pivot system. Earseals mount around a protruded flange and are easily replaceable. The reversible boom mounts on the side of the cup and offers two styles on the models offered. All models offer electrets N/C mics and and a one year warranty. The ANR model offers over 15dB of additional cancellation using a detachable 9 volt battery module Skycom 40-A: 18 oz, 24 dB ....................... P/N 11-09099....... $94.00 Skycom 80-A: 18 oz, 23 dB ....................... P/N 11-09098..... $235.00 Skycom ANR: >15 dB ANR........................ P/N 11-02214..... $129.00
These seals fit SKYCOM H-40A, SKYCOM ANR, and SKYPRO H-80A headsets. Replacement Gel Ear Seals ................... P/N 11-04680.... . $23.95/pr. Replacement Foam Ear Seals. .............. .P/N11-04681...... $11.95/pr.
8 Series superlight headsets are full-size quality headsets available at just 11.9 oz., delivering comfort, and performance. A new lightweight, custom flex boom stays where you put it, even in the roughest conditions. S-58 features new, durable, non-glare powder-coated black hardware and Sigtronics sky-blue earcups. The new ergonomic headpad and custom fit gel seals deliver comfort and eliminate hot-spots. A new microphone configuration cancels unwanted noise before it can get into the system. Sigtronics 5-year warranty, custom padded bag, easy-grab volume controls, ultra foam windscreen & exclusive clothing clip are included. Wt. 11.9 oz. Flex boom. Mono........................... P/N 11-19105 ............... $237.00 Stereo ......................... P/N 11-02803 ............... $267.00 Helicopter ................... P/N 11-02813 ............... $252.00 S-68 headsets include all of the S-58 features plus high-performance black earcups and 14K Gold Plated hardware. P/N 11-19125 .. $252.00 Stereo ................P/N 11-02805 ........ $272.00 Helicopter...........P/N 11-02815 ........ $260.00 SIGTRONICS S-40 is a high performance headset featuring an electret microphone, and fully articulating mike boom with full swivel action. The S-40 offers dual volume controls and soft, pliable polyurethane ear cushions for optimum comfort. The S-40 weighs 16 oz. It is made in the U.S.A. and carries a 3-year factory warranty. Earcups are royal blue. The S-40-S only has dual volume controls (stereo) P/N 11-02795 ........ $162.00 Stereo .................P/N 11-02809 ........ $194.00 Helicopter ..........P/N 11-02213 ........ $191.00 S-45 series headsets are the same as the S-40 headset, except they have airflow headpads and gel earseals for maximum comfort. ... P/N 11-02797 ............ $194.95 Helicopter .............. P/N 11-02810 ............ $274.95 Stereo .................... P/N 11-02811 ............ $229.00
SERIES 8 HEADSETS
S-20 incorporates the M-80 microphone, designed specifically for use in high noise environments with its excellent noise canceling properties. The microphone gain is set to operate over a wider range of aircraft radios, even handheld - the ultimate test. S-20 Headset ................ P/N 11-02799 ............ $144.00
HEADSET/INTERCOM PACKAGES
2 Skycom H-40A Headsets 1 Skycom 400 Intercom (portable) Headset Bag Push-To-Talk Switch ...... P/N 11-11885 ........ $382.95
warranty.
Eliminate scratching the top of your canopy by using the Sigtronics S-8 headset. features a behind the head headband with quick adjust hook-n-loop strap that fits the shape of your head, a flex boom and gel ear seals. The S-8 has a passive noise reduction rating of 24 dB. 5 Year P/N 11-00645 ..............$259.00
647
Undercut Comfort-Gel Ear Seal for Improved Comfort. Low Impedance Most popular noise attenuating headset ever produced for use with military radios. Standard headset of the U.S. Air Force, NATO and most airborne command centers. AWACs, under command of NATO and the United States, use the H10-76 both in the cockpit and the communication operations. Headset of choice of M.A.T.S. pilots. Also used in ground support operations. Coiled cord terminates into a U-174/U plug. P/N 11-02226...........$266.91
Made of lightweight advanced composite materials. Features include: Portable battery power module accepts connector from headset and connector on communication cord to aircraft. Powered by 6 AA batteries, has power on LED, and guarded on/off switch. Dual volume controls let you adjust the level for each ear. Custom comfort headpad suspension system adjusts to your head like a pillow. Gel filled earseals are contoured to your ears. Universal flex boom. NRR-22Db passive noise reduction rating plus 12Db to 17Db when ENC is turned on.CALL FOR SPECIAL PRICES ! Part No. Description Price
Fixed wing headset (ENC) with straight, 5ft. cord Snap Lock-Quick release connector/battery power module H20-10XL with mating headset and cord assy connectors/coil $756.09 cord assembly with mating battery connector and panelintercom plugs Fixed wing Headset (ENC) w/straight, 5ft. cord,Snap Lock-Quick Release Connector and panel mount modH20-10XP ule with mating headset connector, on/off toggle switch. $717.03 Connectors/Coil Cord Assembly with mating battery connector and Panel-Intercom Plugs Helicopter Headset (ENC) with coiled, 5ft. (extended) H20- cord, Snap Lock-Quick Release Connector and panel 10HXP mount module with mating headset connector, on/off $730.05 toggle switch
DC H20-10X HEADSETS
Provides David Clark quality without the hot spots, clamping, or weight discomfort. Features a certified noise reduction rating of 23 dB and weighs only 13.4 oz. Drastically reduced headband force, new soft air-flow pillow headpad, flo-fit gel ear seals, M-7A noise cancelling electret mic, and low profile volume controls with detect settings. 5 yr warranty. P/N H10-13.4 ........................................................$306.90 P/N H10-13.4S (stereo) ....................................... $311.55 P/N H10-13H (Helicopter, 5ft. coiled cord) .......... $320.85
Same features as the popular H10-13.4 Headset and has been especially designed to comfortably fit a child. Extremely lightweight and has a new headband assembly which allows you to adjust the headset to your childs head for a perfect fit every time. The new Super Soft Foam-filled Headpad and Flo-Fit Gel Ear Seals, also add to the headsets long-term wearing comfort. When your child grows, a conversion kit is available, to convert your H10-13Y to a David Clark Model H10-13.4 .........................P/N H10-13Y ........$306.90 Conversion kit.............P/N 11-11950 .........$29.75 H20-10 headset features the Custom Comfort System which is a whole new concept in headset in comfort. Includes a headband suspension assembly that can be adjusted to a perfect comfort level, a pillow soft floating headpad for maximum cushioning with no hot spots, and a larger contoured Flo-Fit gel ear seals which mold softly to your head. P/N H20-10 ...........................$327.36 P/N H20-16 (for helicopters) .$339.45
The H10-13X aviation headset has the most advanced Electronic Noise Canceling (ENC) technology assuring an amazingly quiet flight. Available in the most popular and comfortable headset style. H10-13X Features: Quiet Performance Youll hear and feel the difference immediately. When ENC is turned ON, noise cancellation actually improves by an additional 12-17 dB. Thats better total protection than any other headset available today. 5 year warranty. Outstanding Comfort - Lightweight at just 17oz. w/advanced comfort features. Super soft gel ear seals with new exclusive Velvet Fleece surface, combined with reduced headband pressure and a soft foam-filled pillow headpad create a comfort level never before experienced. Superior Communication Intelligibility - The ENC system and the exclusive M-7A noise cancellation electret mic provide unsurpassed performance and clear, crisp transmission and reception. Stereo compatible for use with stereo intercom and cabin entertainment systems. Model Description Part No. Price $628.68
Fixed wing headset (ENC) with straight, 5ft. H10- cord to Battery Power Module to straight 5ft. 11-03819 13X cord with A/C Panel-Intercom Plugs (hardwired) Fixed wing Headset (ENC) with straight, 5ft. cord, Snap Lock-Quick Release Connector/ H10- Battery Power Module with mating Headset 11-03820 13XL and Cord Assy Connectors/Coil Cord Assembly with mating battery connector and PanelIntercom Plugs Fixed wing Headset (ENC) with straight, 5ft. H10- cord, Snap lock-Quick Release Connector 11-03821 13XP and Panel Mount Module with mating Headset Connector, on/off Toggle Switch Helicopter Headset (ENC) with coiled, 5ft. (extended) cord, Snap Lock-Quick Release H10- Connector/Battery Power Module with mating 11-03817 13HXL Headset and Cord Assy Connectors/Coil Cord Assembly with mating battery connector and Panel-Intercom Plug Helicopter Headset (ENC) with coiled, 5ft. H10- (extended) cord, Snap Lock-Quick Release 11-03818 13HXP Connector and Panel Mount Module with mating Headset Connector, on/off Toggle Switch.
New Comfort gel, undercut ear seals. Battery Power Module - One 9 volt battery for up to 25 hours of operation. Pilot Selectable Automatic-Shut Off Feature. Five foot (extended) coil cord terminating with a 10 pin quick release connector. Coiled cord assembly connects Battery Power Module to panel intercom/radio. Same headset can be used with optional panel mount. (H10-56HXP) Dual volume controls let you adjust the level for each ear. Exclusive, patented flex/wire boom for easy, precise microphone placement. Super soft foam filled pillow headpad. NRR 27 dB passive noise reduction rating plus 17 dB to 22 dB when ENC is turned on. Weight (without cord assembly): 22 oz. Description Part No. Price MODEL H10-56HXL 11-03828 $736.56 MODEL H10-56HXP 11-03829 $698.43
MODEL H10-56 - Hinged wire boom with the M-101 amplified Dynamic microphone. Conforms to MIL-M-27291A. Coil Cord (5 extended) with U-174/U Plug. FAA TSO Approved C57 Cat. B and C58a. Exceeds RTCA/DO-214 Standards. Weight (without cord assembly): 20 oz.
$717.03
$679.83
$730.05
11-03827 $332.94
$691.92
648
David Clark comfort fit. For use w/handheld mic. With 18 coil cord which extends to 6 ft, & PJ-055B plug. P/N H10-00 ........................ $205.53
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Accepts 6 AA batteries. The protective cover keeps battery terminals from accidental contact with conducting surfaces while stored. Having a Spare Battery Cartridge, loaded and ready, will minimize time without electronic noise cancellation when batteries drain. P/N 11-02019 ...........$15.50
This new XL-9V 9V battery pack is easier to operate, wear and store. It is 50% smaller and 50% lighter than previous battery packs. It runs off a single 9V alkaline battery to provide power to the headset ENC system. The XL-9V features an Auto Shut Off function to save the battery if the power switch is left on when the headset is not in use. P/N 11-01783 ...........$97.65
8 new headset design advances make the David Clark H10-20 a must see. The completely flexible boom assembly can be adjusted for perfect microphone placement. The M7A microphone is the most advance noise-cancelling amplified electret mike available. Features a redesigned air-flow headband with liquid-filled ear seals for optimum comfort. Comes with volume control and a 5yr warranty. Made in the U.S. Straight Cord .............P/N H10-20.............$302.25 Coiled Cord ...............P/N H10-21.............$306.90 Helicopter ..................P/N H10-26.............$314.34
H10-20 HEADSET
Ear Seals have redesigned to be softer, more supple and form fitting, with a unique undercut shape that provides more room for your ears. This exclusive design makes for a larger, yet lighter ear seal. This new ear seal is now standard on the entire line of DC aviation headsets. New Ear Seal Features: 26% lighter 60% more surface area in contact with your head provides greater comfort by dissipation of necessary headband pressure 30% more interior volume creates more room for your ear P/N 11-01782 ....................$22.50
Excellent grooved gel/foam filled ear seals. Made to DCCI standards and very comfortable. Excellent alternative/replacement ear seals for most of the David Clark aviation, ground support, two-way, and vehicle intercom headsets. Note: Does not fit the David Clark H-20 series or X-11. P/N 11-09330 ....................$16.85 Ground Support Headsets are designed to facilitate communication when background noise or distance makes it extremely difficult to communicate. During ground-support operations, communication is critical to ensure the safety of everyone in the vicinity as well as the protection of the aircraft from accidental damage.
This dual headset, used by the Air Force, features foam filled ear cushions with an M-1/DC amplified dynamic noise cancelling mike. With 6 feet straight cord, PJ-055B headphone plug and PJ-068 mike. plug. P/N H10-30 ........ $251.10
The H10-36 headset features the M-1/DC dynamic mic and coil cord which extends to 5 ft., with U-174/U plug for helicopter installations. P/N H10-36 ............$263.19
Features unique foam/air-flow headpad, low-pressure headband, Flo Fit Gel ear seals, and dual volume controls. Also features the M-7A advanced noise cancelling amplified electret mic. Customize your H10-60 with 3-position headset pressure adjustment, boom guide lock, headband size adjustment, and cord selection. P/N H10-60 ........................ $345.96
MODEL H7010 - Noise Attenuating Headset * M-101 Noise-Cancelling Microphone * 30-inch straight cord with U174/U plug * Noise-shielded microphone (muff) with On/Off switch * Soft headpad and ear seals guarantee exceptional comfort * Snap-fastened nylon straps secure microphone muff to mouth * Corrosion-resistant, chrome plated headpad/stirrup assembly * Extremely durable and reliable * NRR 26dB P/N 11-07116 ......................... $269.85 MODEL H-133C/AIC - Noise Attenuating Headset * M-101/ AIC Noise-Cancelling Microphone * 30-inch straight cord with U93A/U plug * Noise-shielded microphone (muff) * Soft headpad and ear seals guarantee exceptional comfort * Snap-fastened nylon straps secure microphone muff to mouth * Corrosion-resistant, chrome plated headpad/ stirrup assembly * Heavy duty and extremely reliable * For noise levels to 140dB P/N 11-07117 ......................... $289.95
Series K Helmet provides the ability to convert all David Clark Over-The-Head style (Except H20-10 & H10-80) headsets into a Helmet/ Headset assembly. The Kit and a David Clark headset gives both impact and hearing protection in addition to clear, normal conversation in high noise environments. The Series K Helmet Kit consists of a helmet shell with nape pad and a helmet liner. Lightweight, the combined weight of the Helmet/Headset assembly is 42 oz. Helmet Kit ..................... P/N K10..............$359.00 This ballistic Nylon Carry Bag is black on black, with the DC logo subtly embroidered in the lower right corner. This bag has been carefully chosen for its simplicity, quality and workmanship and is a fitting complement to any David Clark Headset. P/N 11-00642 .....................$19.50
A unique dual impedance headset for use in civilian and military style aircraft. The Model H10-66 features include new comfort gel, undercut ear seals, hinged wire boom with the M-101 amplified Dynamic microphone, and a Noise Reduction Rating (NRR) of 27 dB. P/N H10-66 ...................... $379.44
Undercut Comfort-Gel Ear Seal for Improved Comfort. Low Impedance. Most popular noise attenuating headset ever produced for use with military radios. Standard headset of the U.S. Air Force, NATO and most airborne command centers.Coiled cord terminates into a U-174/U plug. P/N 11-02226 .................. $266.91
649
SENNHEISER HEADSETS
CM WP ME HA AP LG EP CS IN EL AV TO
SENNHEISER HMEC 250 HEADSET SENNHEISER S1 PASSIVE HEADSET SENNHEISER S1 DIGITAL HEADSET
Sennheiser S1 Digital The Quiet Revolution. The Sennheiser S1 Digital aviation headset is designed to give you maximum control over noise levels in the cockpit, so you can focus on the joy of flying. At the push of a button, the S1s exclusive NoiseGard/digital technology accurately analyzes the cockpits noise levels to achieve superior noise cancellation during all phases of flight-from take-off to landing. Smart adapt digital ANR customizes and optimizes noise reduction to your aircraft / your fit Headband tension adjustment so you can choose how tight / loose you want it Treble boost for customized audio clarity Ear pad comfort zones reduce the squeeze on your glasses Bluetooth connectivity for both music and cell phone Optimized audio filters optimize clarity for communications and music S1 Digital ............................... P/N 11-09919 ................ $1,095.00 Headset P-XLR-3 Adaptor ...... P/N 11-10052 ..................... $64.95 Headset P-CIG Adaptor.......... P/N 11-10053 ..................... $74.95 S1 GA Headset Lemo Panel Mount Adaptor P/N 11-10039 ..................... $99.95
Highest performance, outstanding wearing comfort, feature packed, and state-of-the-art design the new Sennheiser S1 Passive is the ultimate passive aviation headset. Highest security is ensured by Sennheisers renowned sound quality, ActiveGardTM and passive noise attenuation for clear communications. The auto mute function automatically switches off your music or cell phone calls during ATC communication. Adjustable contact pressure and a special sunglass zone provide the perfect balance between comfortable fit and optimum passive noise attenuation. The state-of-the-art design, powered by BMW Group DesignworksUSA, makes the S1 Passive as good looking as it is comfortable - even on the longest flights................................................................. COMING SOON
The HMEC 26 is the premium headset for commercial and business aviation. It is lightweight, comfortable, and offers the best combination of ANR and passive performance for jet aircraft. The HMEC26-T is Talk-Through equipped for direct cockpt communication Up to 16dB ANR, and 11dB passive attenuation. Flip-away headphone allows singlesided listening. Operating time with 2 AA batteries approx. 60 hours (auto shut-off) Superior audio quality / modular cable concept BV-K model has Cell/MP3 input and volume controls Peak-Level-Protection eliminates volume peaks ETSO C57a & 58a and TSO C-139 approval / 5 year warranty HMEC 26-BV-K with L/R volume control ......... P/N 11-07945 .....$805.00 HMEC 26-B-K .................................................. P/N 11-07944 .....$731.00 HMEC 26-T w/ Talk-Through (Headset Only) . P/N 11-07949 .....$588.00 BV-K Cable for HMEC 26-T............................. P/N 11-08056 .....$284.00 B-K Cable for HMEC 26-T ............................... P/N 11-08054 .....$208.00 HME 26-K passive model ................................ P/N 11-07950 .....$424.00
PS BV
The HMEC 250 offers a unique foldable, Lightweight design. Best for those quieter cockpits. 3 year warranty. HMEC 250 is Talk-Through equipped ANR powered by 2 AAA batteries Highest wearing comfort Peak-Level-Protection Audio input for Cell/MP3 Weight 10 oz HMEC 250 .............. P/N 11-07030..$499.00 HME 95 passive...... P/N 11-09139. $229.00 Conformal Ear Seals. P/N 11-07032....$30.00
The HMEC 46-1 is a very lightweight, on the ear design; ideal for commercial and business jets. Up to 16 dB ANR Flip-away headphone for single-sided listening. Operating time with 2 AA batteries approx. 100 hours (auto shut-off) Superior audio quality / modular cable concept. Peak-Level-Protection eliminates volume peaks BV-K model has Cell/MP3 input and volume controls ETSO C57a & 58a and TSO C-139 approval, 5 year warranty HMEC 46-1-BV-K with L/R volume control ...... P/N 11-05274 .....$696.00 HMEC 46-1-B-K............................................... P/N 11-05272 .....$521.00 HME 46-K passive model ................................ P/N 11-05247 .....$399.00 HME46 Headset Only ...................................... P/N 11-10466 .....$274.00 V-K Cable Only ................................................ P/N 11-10467 .....$219.00
650
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
gel ear seals with the industrys first double bump design to keep the gel in place. Other gel seals tend to squash out over time. Deluxe gel seal will block out noise for increased noise reduction. Fits Headsets Inc. and other top brand general aviation headsets. ........................................................P/N 11-06496 ............... $22.50 PILLOW TOP HEADPAD - Enjoy your flight with Pillow Top headpad. 100% sheepskin eliminates the pressure on the top of the head. Made to fit all general aviation, over-the-head headsets with 5/8 headbands. ..............................P/N 11-06495 ............... $24.50
HELICOPTER TO GENERAL AVIATION ADAPTER - Helicopter to General Aviation adapter converts helicopter to general aviation. ...............................P/N 11-09584 ............... $49.95 GENERAL AVIATION TO HELICOPTER ADAPTER - General Aviation to Helicopter Adapter converts general aviation application to helicopter. ..........P/N 11-09583 ............... $55.85 ELECTRET MICROPHONE FOR HEADSETS INC. 1000/4000/6000, D502- BNC clear hear electret microphone. P/N 11-06501 ............... $24.85
24dB NRR hearing protection Noise-canceling electret mic Rugged Mil-Spec cabling Dual volume control stereo Pillow top head pad New Full flex boom design Gel ear seals Cotton cloth ear covers Wind block mic muff Weight: 15 oz. 3 year warranty Additional features include high fidelity headphone drivers for music, gold-plated plugs, rugged ABS ear cups and chrome stainless steel headband combined with the best audio components makes the stereo Headsets Inc.-4001 the affordable aviation industry leader. Headsets Inc. 4001PNR Headset Black .. P/N 11-08093.............$167.95 Headsets Inc. 4001 PNR Headset White P/N 11-09566.............$159.95
AUTO SHUT-OFF BATTERY BOX FOR HEADSETS INC. 6000 ,D700 - Will extend the battery life by automatically turning
off after 4 minutes of inactivity. The flashing LED acts as a reminder. P/N 11-07179 $31.75
POWER SUPPLY FOR PANEL MOUNT HEADSETS INC. 6000, D800 - For 12V or 24V aircraft. You can save on batteries by
powering the ANR system from aircraft power. Has 2 voltage regulators, a DC-DC converter for isolation, and an in-line 1/4 amp fuse. Specify 12 or 24 volt aircraft when ordering. P/N 11-07180 ............... $38.75
HEADSET THUMBSCREW - This black threaded thumbscrew allows adjustment of the headband on all model Headsets Inc. headsets. P/N 11-09588 ................. $4.50
Powerful ANR performance Noise-canceling electret mic Rugged Mil-Spec cabling, chrome plated plugs Dual volume control stereo Pillow top head pad New Full flex boom design Gel ear seals Wind block mic muff Auto shut-off battery pack Auxiliary power input jack 20-hour battery life Weight: 16.5 oz. 3 year warranty D3P01 Personal Headset Bag
Ear cups with internal baffle-plate providing the strongest ANR in the industry. With 18-20dB of noise reduction @ 200Hz with an effective range from 20 to 600Hz, it is guaranteed to exceed the performance of any production ANR headset.
HEADSETS INC.-1000/6000 CLAMP JOINT BRACKET - The clamp joint bracket mounts under the headset thumbscrew and holds the crossover cable in place when adjusting the headband. P/N 11-09589 ................. $0.50 HEADSETS INC.-1000/6000 STIRRUP CLAMP - The Stirrup Clamp is adjoined to the stirrup and holds the crossover cable in place along the stirrup on each side of the headset. P/N 11-09590 ................. $0.39 DUFFEL STYLE FLIGHT BAG D3002- Six compartments, dual zippered flap on the center compartment with a Velcro strip. On each end has a zippered pocket, and two smaller acces compartments P/N 11-07373 ............... $32.75 PERSONAL HEADSET BAG, D3P01 P/N 11-07784 ............... $17.95
Headsets Inc. 6001B ANR Headset Black P/N 11-08094 .............$399.00 Headsets Inc. 6001T ANR Headset Tan . P/N 11-10074.............$399.00
651
AVCOMM HEADSETS
A new, intercom-powered hands-free LED flashlight thats built into the headset microphone. Never require batteries. Provides power to the LEDs without a battery pack! Has a backup power system that provides 30 minutes of power in case of power failure. Integrated version powered by the aircraft intercom system (No battery pack required)
AVCOMM AC-747FL HEADSET - Comes with GA and Helicopter cords Key Features: Ships Power FLITELite - no battery pack or wires required! Exclusive PNR technology and plug and fly design. Full flex boom Ultra-lite micro samarium cobalt speakers. Each ear cup features an independent volume control. M-60 microphone with active filtering chip Deluxe Comfort Package included Full five-year factory warranty Converts easily by plugging in either the general aviation straight cord or the helicopter coil cord (both included with the headset). FACTORY INSTALLED Stainless steel headband with easy thumbnut adjustment Deluxe comfort headpad Acoustic foam earseals ALSO INCLUDED 100% cotton ear covers Acoustic mic muff PN 11-05606 ........$299.95
AVCOMM AC-900 FL HEADSET - Exclusive patented PNR (passive noise reduction) technology. Key Features: Patented PNR audio technology and full spectrum stereo response Ultra-lite Neodymium speakers M65 microphone with active filtering chip. Full flex boom Built-in push-to-talk. Mono-stereo switch built into the cord Each ear cup features an independent volume control Deluxe gel ear seals Full five-year warranty. Gold plated mic and headphone plugs PN 11-02263 ..................$228.95
652
FLIGHTCOM HEADSETS
Offering a level in pilot comfort and acoustic performance, the passive version of the new Denali weighs in at a scant 10.5 oz., yet provides outstanding noise attenuation. Denali Passive Headset (blue) .................... P/N 11-00012.............$273.00 Flightcoms Classic ANR Headset is built with comfort features not found in similar headsets. With overstuffed Confor foam ear seals and larger than normal headband, the classic aviation style provides extended comfort and performance. Comfort: Classic ANRs Confor Foam ear seals, and a wide polar fleece headpad ensure comfort. Innovation: A volume control on each dome allows for independent adjustment. Noise reduction: We keep it quiet with our advanced hearing protection technology. Confor Foam ear seals effectively block out sound. Noise reduction rating is enhanced by 14 to 18 dB at certain key low frequencies. Comes with a durable nylon carry case Precision flex boom with noise canceling electret microphone 9-volt battery Chrome headband with a washable polar-fleece headpad Stereo/mono switch ensures audio compatibility Mic muff and carrying case included In-line, drop-and-go Provides an additional 14-18dB noise attenuation at key low frequencies Weight: 17.9 oz. Dual-volume controls allow for independent volume adjustment in each ear dome 3-year warranty Standard ....................................P/N 11-01326 ...................................................... $329.00 Helicopter ...................................P/N 11-09178 ...................................................... $325.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This headset provides supreme comfort and fit through its washable polar fleece headpad, silicone gel ear seals and cloth ear seal covers. Features include noise cancelling electret microphone, precision flex boom, dual volume controls, stereo/ mono switch, 22dB noise reduction rating and all top quality components. Wt 17.9oz. 3-yr factory warranty P/N 11-08760 .........$159.00 This headset combines the proven performance and affordability of the popular 4DX Classic headset with the comfort of the air pillow headpad. Features of the 4DLX Classic include combined foam and liquid ear seals, precision flex boom, noise cancelling electret microphone, stereo/ mono switch, cloth ear seal covers, mic cover and 3-yr factory warranty. 24dB noise reduction rating Wt 16.8oz P/N 11-17115..........$119.00
The lightest weight headset available from Flightcom and replaces old model 4.2. The F20 has a new, durable construction and updated appearance along with new features such as a volume control and an improved flexible boom. Also included is a set of 30dB ear plugs to help give you noise attenuation along with the comfort of a lightweight headset. The F20 has stereo/mono capability, a noise cancelling electret mic, weighs only 4.6 oz, and includes a mic muff. 3-year factory warranty. P/N 11-17615 ...........................$108.00 The 4DX Classic is an entry-level headset with classic Flightcom ruggedness. With an easy-to-position wire articulated boom and a ventilated foam rubber headpad and combined liquid and foam ear seals, the 4DX Classic is comfortable and affordable. Noise canceling electret microphone Single-volume control Stereo/ mono switchable NRR 24dB Weighs 16.9 ounces Mic muff and cloth ear seal covers included Three-year warranty P/N 11-17110............ $99.00 Newly designed battery box includes SAT/cellphone support, auxiliary input and improved battery monitoring. Active Noise Reduction (ANR) provides an additional 14-18dB noise attenuation. ANR is powered by two AA batteries providing up to 50 hours average operation. Versatile flexible microphone boom for precise adjustment. Cord configuration optimized for flight deck and cargo compartment crews. In-line, quick disconnect jack on mic boom for chemical defense suit and boom replacement. Sure Power System? (SPS) shuts off ANR when no audio is present. 5 ohm, M-87 dynamic microphone meets MIL 2654212E, mounted on flex boom. U-174/U (4 Conductor) plug. 6-conductor, shielded, coiled comm cable. Approved for use on USAF KC-135, C-5 and C-130 (all types except J). USMC approved. Also available in passive models. NSN 5965-01-5213223. Includes carrying case. Two-year warranty P/N 11-10396..........$729.95
Flightcoms E-13 is a classic style headset designed for rugged cockpit environments. The headset prevents noise fatigue and enhances communication through ANR technology. Features: Glove Rugged comm. cable bend relief provides increased durability Steel spring chrome headband and stirrups with scratch resistant ABS eardomes Standard comfort features include protein leather covered dual density foam ear seals and washable polar fleece headpad U-174/U (4 Conductor) plug 6-conductor, shielded, coiled comm cable 5 ohm M-87 dynamic microphone meets MIL2654212E In-line quick disconnect jack on the mic boom for chemical defense suit and boom replacement Dome-mounted volume control DO-160D tested ? environmental and explosive proof Passive noise attenuation 21dB NRR Two-year warranty. P/N 11-10395..........$295.00
ACCESSORIES
HEADSET BAG - Padded nylon headset bag with 2 chart-size mesh pocket .............................................. P/N 11-07371 ........$18.75 COMFORT SEALS ........................................................................................................................................ P/N 11-17130 ........$38.75 GEL-FLO SEALS .......................................................................................................................................... P/N 11-17135 ........$31.25 LEATHER EAR SEALS - 103-0019-10 Protein Leather Ear Seals. Fits all Denali headsets. ...................... P/N 11-05947 ........$46.75 CLOTH EAR SEAL COVERS - Fits dome style headsets 4DX, 4LX, 4DLX, & 5DX. .................................. P/N 11-08467 ........$15.50 P/N 11-07371 POLAR FLEECE HEADPAD - Fits 4DX, 4DLX, 5DX & Classic ANR. Velcro closure. ................................ P/N 11-08313 ........$25.75 DENALI HYGIENE KIT - Ear seals, headpad and mic muffs. ...................................................................... P/N 11-04855 ........$65.50 5DX HYGIENE KIT - 2 gel ear seal, 2 cloth ear seal covers, 3 mic muffs and 3 securing o-rings. ............. P/N 11-08592 ........$28.95 A9 MIC - Eiminates distortion and background noise, provides enhanced voice clarity. Can be used as a replacement microphone for virtually all headsets with wire booms. .......................................................................................................... P/N 11-08765 ........$54.75 LARGE MIC MUFF........................................................................................................................................ P/N 11-17649 ........$17.50 P/N 11-08765 SMALL MIC MUFF - With o-ring (3 pk). For use on F20............................................................................. P/N 11-08591 ........$13.50 POLAR FLEECE HEADPAD - Fits 4DX, 4DLX, 5DX & Classic ANR. Velcro closure. ................................ P/N 11-08313 ........$25.75 FLIGHTCOM COPILOT TRANSMIT CABLE - Requires separate PTT. (Not compatible with iNova.) ....... P/N 11-08309 ........$11.75 FLIGHTCOM CIG LIGHTER ADAPTER - Adapter to power intercom from aircraft power. ........................ P/N 11-08310 ........$12.95 PTT SWITCH GOLD - Push-to-talk switch with durable gold contacts......................................................... P/N 11-08311 ........$22.85 P/N 11-08317 FC-06 MIC Y ADAPTER - Allows pilot and copilot to share a single Mic jack. Req. separate PTT for each position. P/N 11-08314 ........$15.65 4 PLACE JACK PACK - Switchcraft mic and stereo headphone jacks & hardware to install up to four positions. ............... P/N 11-08315 ........$32.75 FLIGHTCOM FC-07 GA TO HELICOPTER ADAPTER - Dual plug to single plug adapter ................................................... P/N 11-08316 ........$49.95 OPEN COCKPIT MIC MUFF - High density muff installs over existing muff on Classic headsets to block wind noise. ........ P/N 11-08317 ..........$7.85
Combo# Description (Combo includes:) 1A 2 Flightcom 4DX hdsts, (1) IISX 2 pl. intercom & (1) P-T-T switch 2 Flightcom 4DX hdsts, (1) IISX 4 pl. intercom & (1) P-T-T switch 1B 2 Flightcom 4DLX hdsts, (1) IISX 2 pl. intercom & (1) P-T-T switch 3A 2 Flightcom 4DLX hdsts, (1) IISX 4 pl. intercom & (1) P-T-T switch 3B 2 Flightcom 5DX hdsts, (1) IISX 2 pl. intercom & (1) P-T-T switch 3C 3D 2 Flightcom 5DX hdsts, (1) IISX 4 pl. intercom & (1) P-T-T switch
653
TELEX HEADSETS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Ascend is ideal for commercial pilots with diverse needs and discerning standards. A simple procedure allows you to change the connector, remove the boom, or add a battery. Ascends advanced noise reduction system specifically targets common cockpit noises, such as wind noise and avionics cooling fans. Improves upon the Active Noise Reduction in the popular ANR 500 & 850 models and the passive noise reduction of the Airman 850. ANR power can be delivered without batteries through the mic plug, or with the convenient rechargeable battery module. Rechargeable long-lasting battery Ascend with PJ Connectors ........................... P/N 11-08535 .... $598.00 Ascend with XLR (Airbus type) Connectors ... P/N 11-08574 .... $589.00 Accessories Ascend Carrying Case ................................... P/N 11-08564 ...... $27.50 Ascend Temple Pad PAD .............................. P/N 11-08565 ........ $9.95 Ascend Filler Module ...................................... P/N 11-08566 ...... $18.50 Ascend Audio Input Cable.............................. P/N 11-08567 ...... $48.50 Ascend International Power Adapter.............. P/N 11-08568 ...... $24.75 Ascend N. America Battery Charger .............. P/N 11-08569 ...... $75.85 Ascend Battery ............................................... P/N 11-08570 ...... $55.65 Ascend Headband Pad .................................. P/N 11-08571 ...... $14.25 Ascend Mic. Windscreen ................................ P/N 11-08572 ........ $7.95 Ascend Ear Cushion (pair) ............................. P/N 11-08573 ...... $26.25 Designed for students, new pilots, and value-conscious experienced fliers. Offers comfort, excellent hearing protection and value. Provides an impressive 20+ dB of passive noise protection and a topquality noise canceling electret microphone. A lowprofile headband for even weight distribution plus patented ComfortCam technology, a three-click tension adjustment system for a custom fit. Special earpieces with foam ear-seals pivot two ways to conform to any wearer while detent sliders adjust the headband. P/N 11-04564 ............. $189.00
Combines superior ANR protection, a noisecanceling electret microphone, and fully adjustable boom. Include Telexs patented ComfortCam technology that allows you to quickly and easily control the tension of the ear cups. Low profile headband. Utilizes impactresistant headband design with stainless steel reinforced stress points. Cell Phone/Audio Adapter. Advanced Microphone Technology. Boom Microphone. Flight Bag. Weight: 14.2 oz/403 grams. Runs on 2 AA batteries P/N 11-04562 ....................... $459.00
TELEX STRATUS 30
This headset from Telex features a single side soft ear tip receiver with superior noise cancelling amplifier. The electret microphone is fully adjustable for use on the right or left side. Order push-to-talk switch for aircraft not so equipped. P/N 11-09600 .................... $259.00
A featherweight headset which is the lightest in the industry (2.5 oz.). Features a miniature noise-cancelling electret microphone that provides superior 400 Hz hum rejection. Microphone pivot arm pivots 310 for use on left or right side. The optional Telex PT-300 push-to-talk switch is recommended for use with the Airman 750. P/N 11-09500.........$363.95 Airman 750 Airbus plug P/N 11-09302 .........$255.00 Foam Ear Cushions for 750/760 ........................$4.95
Includes Telexs innovative cell phone/MP3 adapter that allows you to attach both your cell phone and MP3 player at the same time. Features a plush, thick foam headband pad and newly designed, more comfortable ear cushions. Individual volume controls for each ear cup and a stereo/mono select switch. Impact-Resistant Headband Design. Flight Bag. Weight: 13.6 oz/386 grams P/N 11-04563 ................$329.00
The Airman 750SS is 25% lighter than the Airman 750. Its effective weight (without the cord) is only 2.4 oz. Many pilots prefer the ergonomics of a single sided headset. It eliminates the need to pull off one of the earphones when listening to cockpit conversations. P/N 11-01123 ................ $225.00
Allows you to power the headset from the aircraft panel, standard alkaline batteries, or rechargeable batteries. A built-in battery recharger that recharges when plugged into a wall socket, the aircrafts panel power or even your cars 12-volt power outlet. Ensures more than 50 hours of battery life. Telexs patented ComfortCam to eliminate clamping. A unique headband construction that distributes weight evenly for a perfect fit, plus thick foam headband pad. Telexs innovative cell phone/MP3 adapter which allows you to attach both your cell phone and MP3 player at the same time. Flight Bag. Weight: 14.2 oz/403 grams. Runs on 2 AA batteries 30XT headset .............................P/N 11-04561 ........ $569.00 AC/DC 30XT Adapter .................P/N 11-04576 .......... $22.50 Cuts noise 3 ways by providing 24dB passive attenuation for high frequency noise outside the ANR range, 15dB of analog ANR for noise reduction below 1000 Hz, and up to 50dB of digital tonal noise reduction. DSP (Digit Signal Processing) allows the Stratus to predict recurring cabin noise and fine tune the Active Noise Reduction for the ultimate in hearing protection. Patented Comfort Cam tension adjustment allows for a custom fit, as do the heat sensitive slow recovery foam ear cushions, which conform to the users head during wear. Extra thick cushions and pad reduce headband tension and provide a luxurious feel. Overmolded rubber earcups, volume control knobs and comfort cams offer ease of handling, and add to the comfort package. Features Capable of battery or panel power Stereo/mono switch Auto shut-off feature saves battery Dual volume controls Reversible mic for pilot/copilot operation 18 oz. Collapses for ease of portability. Incl. Deluxe carrying case P/N 11-04560 ................... $729.00
Uses Active Noise Reduction technology to provide up to 12dB of noise attenuation ensuring the clearest in-flight communication. Weighs less than 4 oz. Combines set and forget volume control with never worrying about a battery pack. Power to the ANR is provided by mic bias (active intercom) eliminating the need for battery packs or panel power. By drastically reducing wind noise in jet cockpits, the Airman ANR 850 helps to reduce fatigue. The Telex Airman ANR 850 is unsurpassed in clarity, comfort and convenience. ................ P/N 11-01880 .... $450.00 Telex Airman ANR 850 (Airbus Application) ... P/N 11-05464 .... $445.00 Telex 850 Leather Ear Seals........................... P/N 11-04332 ...... $23.75
TELEX AIRMAN 760 HEADPHONE - A featherweight headphone unit designed for use with hand-held microphones. For long term comfort, an adjustable clothing clip removes the cord weight from the head of the user. P/N 11-09300 .............. $92.00
TELEX HEADPHONES
Windscreen (750,Pro III,ANR500) ...............P/N 11-01112 ............ $6.25 Cushions (750, 760) ....................................P/N 11-01113 ............ $4.95 Gel cushion-Full cushion headsets .............P/N 11-01114 .......... $29.95 Windscreen-Full cushion headsets .............P/N 11-01115 ............ $7.50 Foam Cushion - Full cushion headset ........P/N 11-01117 .......... $19.75 Mic Muff for Dynamic mic ............................P/N HS036.1 ............. $3.95
TELEX ACCESSORIES
654
PLANTRONICS HEADSET
Two Place Electret ...... P/N 11-05327 ....... $257.55 1303-1 LSA - Comm/Stereo/Electret P/N 11-07907 ...... $257.55 1303-2 LSA - Comm/Stereo/Dynamic P/N 11-07908 ...... $257.55 1303-3 LSA - Comm only / Electret P/N 11-07909 ...... $239.15 1303-4 LSA - Comm only / Dynamic P/N 11-07911 ...... $239.15 1303-10 GA-Comm/Stereo/Electret ..............P/N 11-07913 ...... $257.55 1303-11 GA-Comm/Stereo/Dynamic.............P/N 11-07914 ...... $257.55 1303-12 GA-Comm Only/Electret..................P/N 11-07915 ...... $239.15 Single Headset, Electret ......P/N Single Headset, Dynamic ....P/N Headset, General Aviation ...P/N Dual Headset System, Electret P/N
SPORT-LINK INTERCOMS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Combines a unique lightweight design and advanced technology to deliver the ultimate in comfort and reliability. The noise-canceling microphone enables clear, uninterrupted communications between air and ground. Its compact under-the-ear design ensures a secure, comfortable fit for extended wear, yet is convenient to carry and stow. Features: * Hear every word through superior audio quality * 5-foot cord with one each PJ055 and PJ068 plug. * FAA approved M200 Headset Dual Plugs .................. P/N 11-07311 .................$145.95 MS200 For Airbus............................... P/N 11-08905 .................$182.95
SPORT-LINK HEADSETS
The Nav-Data Technologies deluxe headset has one of the best passive noise reduction ratings of any headset available at any cost. There are many reasons to own the Nav-Data Headset : * Switch selectable stereo or mono operation * Dual volume controls * Gel earseals for extra comfort and noise attenuation * Super padded head band for comfort during long flights * Full flexible mic boom stays where you put it! * Noise canceling electret mic * Weighs only 14.3 ounces P/N 13-06087 ............................$92.50
EM-1 features conservative dark green ear cups, an Oregon Aero SoftTop padded headband, gel ear seals, and place-it-anywhere mic boom which makes it ergonomically friendly. Stereo capable with individual volume controls for each ear and a switch on the cord for mono or stereo audio. New ANR modules are made of softer material for better noise absorption. Ear cups are also rubberized for the same reason. A separate battery box is used and shares a cord with the mic/phone jacks, eliminating the need to unite 2 separate cords. The cords are heavily reinforced at attach points to avoid wear or breakage. The cords separate at the end so you can find a convenient place to stow the battery box in the cockpit. Optional power sources allow the EM-1 to be powered by the aircrafts electrical system, a cigarette lighter, or rechargeable battery. Comes with a 3-yr warranty, headset bag, the Oregon Aero SoftTop, & gel ear seals. P/N 11-00512 ........ $359.00
Dual Helmet System, Electret ... P/N 11-05496..$947.55 Dual Helmet System, Dynamic..P/N 11-05497..$708.35 Single Helmet System, Electret P/N 11-05498. $340.35 Single Helmet System, Dynamic P/N 11-05499..$289.75
Dual Detach System, Electret...P/N 11-05500 ..$947.55 Detach Helmet / Electret Headset only P/N 11-05502 ..$340.35 Detach Helmet / Dynamic Headset only ............P/N 11-05503 ..$289.75 GA Detach Helmet - Lynx ..................................P/N 11-09183 ..$238.28 GA Detach Helmet - Rad ...................................P/N 11-09184 ..$238.28 GA Detach Helmet - Pilot USA ..........................P/N 11-09185 ..$238.28 GA Detach Helmet - David Clark .......................P/N 11-09186 ..$238.28 GA Detach Helmet - Zulu ...................................P/N 11-09181 ..$238.28 C1 Single Helmet only, Electret P/N C1 Single Helmet only, Dynamic P/N C2 Single Helmet only, Electret P/N C2 Single Helmet only, Dynamic...................... P/N Single Face Shield (C1) ................................... P/N
Description Icom A4, A3, A22, A24, A6 PTT Icom A5, A23 PTT JRC/Icom A20, A21 PTT FRS / GMRS PTT (dual plug version) General Aviation PTT - shielded General Aviation PTT - unshielded Cell Phone Cord Music Cord Power Cord
The Super Soft Top headset is the ultimate in comfort. Put this headset on and feel the difference! It contains two layers of foam and one layer of polyester wool that is covered with a 90% cotton fabric for maximum humidity absorption. Easy to install, it fits the following headsets: All David Clark models, (except DC20-10 series) All Pilot Avionics models, (except PA-1776, PA-1779,Premier,Concord HNE,& Commander series) All Marv Golden MGs * All Sigtronics All ASAs * All Softcoms All Flightcom models (except F-20 & Eclipse) P/N 13-00358 ............................$15.99
SPORT-LINK ACCESSORIES
HEADSET COMFORTOP
Description Intercom - Pac Speaker, Extended range Mic. Boom Dynamic Mic. Electret Mic. Electret Noise Cancelling Mic.LB1 Electret Noise Cancelling Mic.LB2 Heavy Duty Wind Screen Peak Visor Helmet Extension
Replaces the original head pad with a sheepskin pad providing optimum comfort. P/N 11-03014 ....................$28.75
Constructed of plush 3/4 thick sheepskin & genuine leather. Does your headset feel uncomfortable and create a sore spot on the top of your head after wearing it for just a short time? If so, you need our plush, super soft sheepskin and leather headset cushion! The soft sheepskin rests on your head instead of the uncomfortable headset pad. Designed to fit all headsets with its adjustable velcro closure. Extra velcro across top also holds your flashlight for nighttime flying. Relieves all contact and pressure on the top of your head for even the longest trips. P/N 13-40730 ...................$15.90
WARNING: - SLC helmets are not designed for safety or to protect against head injury, falling debris, impact, concussion, heat, cold, the elements or any type of injury. They are solely to facilitate communications.
655
3M PELTOR HEADSETS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
With analog and digital active noise reduction This lightweight headset is ideal for use with single/twin engine aircraft planes or with helicopters (with separate adapter cable). It uses both analog and digital active noise reduction for better attenuation. Digital technology cancels propeller and engine noise Single, Twin engine, or Helicopter settings Noise-canceling gentex gooseneck microphone Gel-filled cushions White earcups help reduce heat Peltor stainless steel spring arm headband provides even pressure all day Leather headband Leather headset bag Folds for storage Durable cables 5 year warranty NRR 23dB P/N 11-07590 .........$568.00
These passive aviation headsets from Peltor features a new hygiene kit for increased comfort level and include an aviation carrying case. Color: Midnight blue. Lifetime warranty. Peltor stainless steel spring arm headband provides even pressure all day. Peltor stainless steel spring arm headband provides even pressure all day. 7000 SERIES STARTER AVIATION HEADSET - Includes deluxe carrying case, foam/liquid earseals, single volume control know, 180 electret swivel boom mic, folding headband, midnight blue cups, Lifetime warranty. NRR 24 dBA. P/N 11-01580 ................. $260.00 These passive aviation headsets from Peltor feature new gel earseals, new goose neck boom design, new shielded cable assembly, and a Lifetime warranty. Deep earcup design for increased comfort and higher attenuation. Aviation carrying case included. Peltor stainless steel spring arm headband provides even pressure all day. Color is midnight blue.
Peltor blends them masterfully with Nordica, the aviation headset developed to soar far beyond the expectations of the most discriminating pilots. Features: Lightest weight headset available. 9.8 ounces. Three dual-color designs. Crisp, clear reception/transmission. Countoured, low profile ear cups. Peltor stainless steel spring arm headband provides even pressure all day. Headset Carry Bag optional Nordica Sport Headset Grey .............................. P/N 11-04554 $139.95 Nordica Sport Headset Blue............................... P/N 11-04555 $139.95 Peltor Deluxe Carrying Bag ............................ P/N 11-01586 .. $34.75 Peltor Foam/Liquid Sealing Ring .................... P/N 11-01587 .. $16.25 Peltor Gel Seaing Cushions ........................... P/N 11-01588 .. $45.75 Peltor Cloth Ear Covers .................................. P/N 11-04557 .... $7.25 Peltor Microphone Windscreen....................... P/N 11-04558 .... $9.25 Peltor Clothing Clip ......................................... P/N 11-04559 .... $6.00
Peltor blends them masterfully with Nordica the aviation headset developed to soar far beyond the expectations of the most discriminating pilots. Cellphone/ MP3 Audio Jack. Includes Headset Carry Bag and Cellphone and MP3 compatible cables. Peltor stainless steel spring arm headband provides even pressure all day Lightest Weight Headset Avail. Only 9.8 ounces Dual-Color Design Crisp, Clear Reception/Transmission Contoured, Low Profile Ear Cups NRR 23 dB. Grey ............... P/N 11-05248........... $189.95
7000 SERIES PREMIUM AVIATOR HEADSET Includes deluxe carrying case, gel earseals, single volume with independent earphone level control, premium 180 swivel electret boom mic, shielded cable assembly. Deep earcup design for increased comfort and higher attenuation. Peltor stainless steel spring arm headband provides even pressure all day. Lifetime warranty. NRR 26 dBA. Midnight blue cups ......................... P/N 11-01582 ................ $299.00 7000 SERIES PREMIUM HELICOPTER HEADSET - Same as the Premium Aviator headset, but come with a single plug helicopter format cable assembly, midnight blue cups. NRR 26 dBA. Midnight blue cups ........................... P/N 11-01585 ................$299.00
Worktunes is a self-contained AM/FM noise attenuating headset (NRR 26db) which provides hearing protection combined with an AM/FM radio to provide. Features include: Easy finger tip controls 5 preset stations Volume limited to a safe 82 dB level Gel/Foam cushions MP3 cord included Peltor stainless steel spring arm headband provides even pressure all day. Wide, soft padded headband, flexible antenna. Quick and easy tuning and volume adjustments P/N 11-01589 .............. $81.75 The only muff that lets workers listen safely without removing their muffs. When workers lift their muffs, they lower their protection. Now Peltor puts safe listening at their fingertips. Just push the button on the PTL muff and speech & sounds outside the muff cup can be heard inside-clearly and safely. After 30 seconds, the muff automatically returns to its full protection with an NRR of up to 26 dB. Listen again? Just push again. Its that simple. P/N 11-04310 ...........$37.95
3M PELTOR EARMUFFS
This new headset, designed for low impedance helicopter intercom systems, leads the 3M Peltor line, with advanced comfort and performance features Twin Cup/Double Shell ear cup design provides high attenuation NRR 30 dB Top exit cables allow for easy connection to overhead intercoms Coiled cables extend for console mounted intercoms. P/N 11-08712 .........$329.50
The Aviation 8103 helicopter headset has an ambientnoise compensated dynamic differential microphone, specially designed for aviation intercom systems. The microphone amplifier is designed for intercom systems with 5 Ohm impedance. The frequency range is adjusted for good speech recognition. The earphones have a limited frequency range, to give the best possible speech recognition in the ambient noise of a helicopter. Peltors two-point suspension of the shells on a broad headband ensures total comfort and consistent noise attenuation. The spiral polyurethane cable has a moulded NATO-standard connector equivalent to the Nexus TP-120. P/N 11-08704 .........$199.85
Incorporating 3M Peltor`s technology in both earcup design and electronics makes this MT Series hard hat headset an ideal choice for clear, crisp 2-way communication in high-noise areas. Designed for hearing protection, durability, and comfort. *The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided. Note: Push-to-talk adaptor required Features: Soft foam earcushions Noise cancelling boom microphone Deep earcup design for all day comfort Possible applications such as heavy equipment operators, airport workers, construction, manufacturing, agricultural, racing Specifications: Material: Foam plastic metal Noise Reduction Rating: 21 Decibel P/N 13-11586 .........$304.75
Designed for industrial users working in high noise environments. They offer versatility along with the hearing protection, durability and comfort. Clear, concise ground crew communications and reliable hearing protection during ground support operations. Features the latest in Bluetooth wireless technology. Excellent flexibility when synched up to your existing communication system. Transmit and receive communications without the need for interconnecting cords and wires. Earcups fold over headband for compact storage. P/N 11-09779 .........$399.00
Deluxe Carrying Bag .......................................... P/N 11-01586 .. $34.75 Foam/liquid sealing ring w/ foam inserts - sold as a pair P/N 11-01587 .. $16.25 Gel sealing cushions - sold as a pair ................. P/N 11-01588 .. $45.75 Mic Muff for MT22/MT24 .................................... P/N 11-18535 .. $12.95 Peltor Cloth Ear Covers .................................. P/N 11-04557 .... $7.25 Peltor Microphone Windscreen....................... P/N 11-04558 .... $9.25 Peltor Clothing Clip ......................................... P/N 11-04559 .... $6.00 MT70 Metal Mic Boom - 220 ohm dynamic noise cancelling microphone, military standard. 2-pin nexus plug. Used on all MT series headsets P/N 11-08062 .. $89.50
656
Passive: 25dB (NR) Active: Additional 20-22dB Auto Shut-off Cell/Satellite phone interface Auxiliary audio interface for music or audible checklist/ warnings Mono/Stereo Capability Dual Volume control Custom padded protective case Powered by 9 volt battery Battery life: 25-30 hrs 12.9 ounces (366 grams) Five-year warranty Made in U.S.A
Model PA-1779T PA-1779TH (Helicopter) PA-1779TP (Panel Mount) PA-1779TB (Bose Connect)
Model Part No. Price PA-1771T 11-02110 $375.00 PA-1771TH (Helicopter) 11-03537 $400.00
Active Noise Reduction: 16-19dB Passive Noise Reduction Cell/Satellite phone interface Auxiliary audio interface for music or audible checklists/ warnings All flexible microphone boom Noise canceling electret mic Pillow top head pad Mono/stereo capability Twin layer silicone gel ear seals Cloth ear seal covers Dual Volume Control Padded protective case 9V Alkaline Battery Battery Life: 25-35 hours 13.9 ounces (389 grams) Three year warranty
Part No. 11-03550 11-06505 Price $295.00 $320.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Passive Noise Reduction: (NRR) 24dB Cell/Satellite phone interface Auxiliary audio interface for music or audible checklists/ warnings Full flex memory microphone boom Noise canceling electret microphone Sheepskin fleece head pad Mono/stereo capability Twin layer silicone gel ear seals Individual volume controls Soft padded headset case Five Year Warranty
Model PA-2170T PA-2170TH (Helicopter) Part No. 11-04940 11-03553 Price $179.95 $210.00
Passive: (NRR) 23dB Push-to-talk switch Mono/Stereo capability Dual volume control All flexible mic boom Twin layer foam/gel ear seals Padded Protective bag Triple-plated black hard Weight: 13.4 ounces Washable fleece headpad Auxiliary audio inter-face for music or audible checklist/warnings Cell/Satellite phone interface Three year warranty
Model PA-1181T PA-1181T-P (Pink) PA-1181TH (Helicopter) Part No. 11-03554 11-07326 11-03555 Price $185.00 $185.00 $210.00
Passive Noise Reduction Weighs 14.5 ounces Cell/Satellite phone interface Auxiliary audio interface for music or audible checklists/warnings Half Metal / Half Flex memory microphone boom Noise canceling electret mic. Super Cushion Head Pad Mono/stereo capability Confor foam leatherette ear seals Individual volume controls Soft padded headset case Three Year Warranty
Part No. 11-03556 11-03557 Price $145.00 $170.00
Passive Noise Reduction: (NRR) 24dB Auxiliary audio interface for music or audible checklists/warnings Half Metal / Half Flex microphone boom Noise canceling electret microphone Air-Foam headpad Mono/stereo capability Foam ear seals Individual volume control Warranty: Three Year Warranty
Model PA-1161T PA-1161TH (Helicopter) Part No. 11-04063 11-03559
Passive Noise Reduction:(NRR)24dB Auxiliary audio interface for music-CD, IPOD, MP3 or Sony Playstation. Flex memory microphone boom Noise canceling electret microphone Small Headband for Perfect Fit Mini Super Cushion headpad Mono/stereo capability Foam ear seals Individual volume control Weight:13.9oz (389grams) Warranty:ThreeYearWarranty
Model Part No. Price Passive: 25 dB PA-1151ACB (Boys) P/N 11-09660 $120.00 Active: Additional 20-22 dB PA-1151ACG (Girls) P/N 11-03540 $120.00 Auto Shut-off Cell/Satellite phone interface Auxiliary audio interface PA-1176M MILITARY HEADSET PA-1166M MILITARY HEADSET Checklists & Warnings Passive: 24dB Passive: 24dB Totally self-contained unit Shielded coiled cord with U174/U Shielded coiled cord with U174/U Mono/Stereo capability Metal-Flex sliding mic boom Metal-Flex sliding mic boom Dual volume control M-87 dynamic mic M-87 dynamic mic Gel ear seals, Noise canceling electret mic Super cushion headpad Super cushion headpad Custom padded protective case Padded Protective Bag Padded Protective Bag Rechargeable NiMH battery M-101 dynamic mic also avail. M-101 dynamic mic also avail. Usage time: 45-50 hours Weight; 14.5 oz (406 grams) Weight; 14.5 oz (406 grams) Weight: 14.5 ounces 3-year Warranty 3-year Warranty Five-Year warranty, Made in USA Model Part No. Price Model Part No. Price Model Part No. Price PA-1176M101 11-06542 $195.00 PA-1166M101 11-06544 $275.00 PA-1779M87 11-06539 $575.00 PA-1176M87 11-06543 $215.00 PA-1166M87 11-06545 $290.00 PA-1779M101 11-06538 $550.00
MICROPHONES
A. PA-3 ............. P/N 11-06557 .....$29.95 B. PA-5 ............. P/N 11-06558 .....$38.50 C. PA-7 ............. P/N 11-06559 .....$38.85 D. PA-9 ............. P/N 11-06560 .....$39.75
WINDSCREENS
A. PA-10 ...... P/N 11-06562 ............$3.35 B. PA-10L .... P/N 11-04026 ............$3.95
657
SOFTCOMM HEADSETS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
24 db passive NRR Mono/Stereo switchable Built-in PTT switch Black gel and foam earseals included M-56 electret mic 66 Flexible Heavy Duty Cables Wt: 15.1oz. head weight 5 year warranty P/N 11-03756 .........$167.95
23 db passive NRR 5 year warranty Mono/Stereo switchable Extra large thick soft ear seals M-56 electret mic 66 Flexible Heavy Duty Cables Weight: 13.9 oz. head weight P/N 11-04761 .........$153.95
The C-200 headset features a contoured head pad for a soft, comfortable fit, a flex boom articulating fulcrum with adjustable mic boom and mic muff, and a small power pack with low battery LED indicator. The C-200 is cell phone ready and is complete with interface jack, interconnect cable and hands free adaptor. Other features include silver black dones with silver letting, gel and foam filled ear seals; stereo/mono switch and dual volume controls, noise canceling electret mic and RF immune M-56 amplifier, -24 db passive and -19 ANR, and pushto-talk switch on ear dome. Wt: 14 oz. Power: 9V battery. 3 year warranty. Made in the USA. Specifications: Head Weight: 14.2 oz. Total weight: 18.5 oz. NR Rating: -24 db Passive, -19 db active Warranty: 3yr Unconditional. P/N 11-03019 ........$329.95 The C-300 headset features a fail safe power feature which automatically converts to a full performance -24 dB passive headset should ANR circuit fail. The C-300 is cell telephone ready with amplified volume, detachable cable supplied for ground phone use in noisy environments. Supports Cell Phones equipped with a 2.5mm 3 conductor hands free jack. Listen to both Cell-phone and ATC at same time. The C-300 has noise attenuation of -19db active ANR and -24 db passive, a unique noise absorbing material, positive set flex boom, soft foam ear seals, cloth covers and mic muff. Made in the USA. Specifications: Weight: 16.2 oz Total Weight: 21.7 oz NR Rating: -24 db Passive, -17 db active Warranty: 3yr Unconditional ......P/N 11-03020 .........$398.00
C-200 CENTURION
22 db passive NRR 3 year warranty Mono / Stereo switchable Lightweight foam ear seals M-56 electret mic 66 Flexible Heavy duty cables Wt: 11.9 oz. head weight P/N 11-03759 ........ $164.00
23 db passive NRR Mono only Lightweight foam ear seals M-56 electret mic 66 Flexible Heavy Duty Cables Wt: 12.3 oz. head weight 3 year warranty. P/N 11-03761 .........$106.95 Stereo ...................P/N 11-03762 .........$119.95 Helicopter .............P/N 11-04131 .........$185.95
23 db passive NRR Mono only Lightweight foam ear seals M-56 electret mic 66 Flexible Heavy Duty Cables Wt: 12.5 oz. head weight 3 year warranty P/N 12-01087 ...........$99.00
22 db passive NRR Mono only Lightweight foam ear seals M-56 electret mic 66 Flexible Heavy Du ty Cables Wt: 11.4 oz. head weight Folds into Ball 3 year warranty. P/N 11-03763 ...........$99.00 C-45-10A Black With Audio P/N 11-06368 ...........$99.50
22 db passive NRR Mono only Lightweight foam ear seals M-56 electret mic 3 year warranty 66 Flex HD Cables Wt: 11.4oz. head weight Folds into Ball P/N 11-02654..............$99.00
24db passive NRR Mono/Stereo switchable M-57 electret mic Fully flexible mic boom 66 Flexible Heavy Duty Cables Wt:14 oz. C-80 head weight Wt: 15.6 oz. 3 conductor cell phone compatible 3 yr warranty P/N 11-00211 .........$171.95
22 db passive NRR Mono only Smaller lightweight foam ear seals M-56 electret mic 66 Flexible Heavy Duty Cables Wt: 11.0 oz. head weight Folds into Ball 3 year warranty Red .......................P/N 11-03764 ...........$88.75 Purple ...................P/N 11-07123 ...........$87.00 C-45-10A - Red with audio plug for CD, DVD, MP3 players or handhelds video games. P/N 11-05946 ...........$99.00
Non-Reflective Black Metal Frame with Fixed Metal Stirrups. Gun Metal Grey Domes with Silver Lettering. A Black Two-Piece, 4-way Adjustable wire Mic boom. Extra-Soft, Foam Ear Seals. STEREO/MONO Switch with Dual Volume Controls. Mic Muff and Cloth Ear Covers ** Included ** A ribbed Foam Head Pad and Black Adjustable Metal Head Band. RF immune M-56 Amplifier and Noise Canceling ELECTRET microphone. Gold Plated Communication cable Plugs for noise-free audio. P/N 11-05728 ................$122.95
22 db passive NRR 17 db active NRR Mono/Stereo switchable M-56 electret mic 66 Flexible Heavy Duty Cables Wt: 14.5 oz. head weight Incl. child & adult lightweight foam ear seals Folds into Ball 3 yr warranty Purple ......................P/N 11-01283 ...............$246.95 Black ........................P/N 11-09529 ...............$243.95 Grey .........................P/N 11-09530 ...............$246.95
658
HEADSETS
Features for this headset include an extra thick ventilated cushion headpad and ear seals for maximum comfort, earphones wired in parallel for safety and reliability, adjustable boom microphone that can be placed on left or right side of mouth, and high performance noise cancelling microphones. Additional Features: Corrosion proof chrome plated steel in accordance with demanding government specifications PU cord up to 5 feet long, shielded cable for near perfect E.M.I/R.F.I. protection PU cord and plug configurations for specific aircraft Lock nut construction for customized fit. Set it once it fits you right every time Earphones (300 ohms ea.) wired in parallel for safety and reliability. Earphones compatible with 150-1000 ohm systems. Listen Volume Control allows you to adjust to a comfortable level Flexible tension boom assembly for more comfortable and precise microphone placement Microphone Windscreen Noise Reduction/Sensitivity: 21dB PU cord and plug dual plug configurations for specific aircraft P/N 17-00238 .........$131.95 Features for this headset include an extra thick ventilated cushion headpad and ear seals for maximum comfort, earphones wired in parallel for safety and reliability, adjustable boom microphone that can be placed on left or right side of mouth, and high performance noise cancelling microphones. Additional Features: Corrosion proof chrome plated steel in accordance with demanding government specifications PU cord up to 5 feet long, shielded cable for near perfect E.M.I/R.F.I. protection PU cord and plug configurations for specific aircraft Lock nut construction for customized fit. Set it once it fits you right every time Earphones (300 ohms ea.) wired in parallel for safety and reliability. Earphones compatible with 150-1000 ohm systems. Listen Volume Control allows you to adjust to a comfortable level Flexible tension boom assembly for more comfortable and precise microphone placement Microphone Windscreen Noise Reduction/Sensitivity: 21dB PU cord and plug dual plug configurations for specific aircraft. P/N 17-00237 .........$131.95
The Venture 30 Passive stereo headset combines affordable quality, durability, and features for new pilots and passengers young and old. The 17 ounce weight, open-cell foam PVC ear seals, ventilated foam-rubber head pad, and shallow speaker design deliver adaptable fit. The 24dB passive NRR enables clear communication. A stereo/mono switch and single volume control optimize hearing. The powder-coated black headband matches natural black ear domes. P/N 11-10585 ....$109.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The 17 ounce weight, open-cell foam PVC ear seals, wide and comfortable air-pillow head pad, and shallow speaker design make a very comfortable headset. With 24dB passive NRR, everyone will enjoy clear communication. A stereo/mono switch and dual volume controls optimize hearing. A powder-coated black headband complements the fresh look of onyx black ear domes. A lightweight carrying bag is included. Fixed Wing ....................... P/N 11-10584 .........$139.00 Helicopter......................... P/N 11-10583 .........$179.00
This headset weighs a mere 17 ounces and comes with supple ComLeather ear seals and washable polar-fleece head pad for long-wearing comfort. Like other Flightcom Venture series headsets, the Venture 70 provides a 24dB NRR barrier against cockpit noise. Dual volume controls with stereo/ mono switch optimize hearing. The powder-coated black headband and carbon fiber print ear domes look professional in any cockpit. A lightweight carrying case is included. P/N 11-10581 .........$179.00
This headset helps to ensure four important goals of todays airline communications: safety reliability health protection convenience. The hands of the pilot are completely free from any communication chores, thus ensuring full prompt response to all flight events. Thus, the headset contributes to flight safety. By being tightly, yet comfortably, positioned on the pilots head, above the ear, the headset allows to separate all important communications from cockpit noise, thus contributing to flight reliability. Noisy cockpits produce fatigue and stress on pilots. The headset nearly eliminates this problem, thus contributing to the pilots health protection. Comfort and conveniene are evident by a simple look at the headset. AX20 straight cord up to 5 feet long . Stirrup pivot assembly, such that cups can provide universal fit; Comfortable, extra tick, headpad cushioning; cushioned ear seals for the best possible noise attenuation and comfort; Shielded cable for near perfect E.M.I./R.F.I. protection; Corrosion-proof chrome plated steel; parallel earphone wiring; adjustable volume control; 150 to 10,000 ohms compatibility; Universal mike boom assembly for precise placement of microphone; High performance, noise cancelling microphone. P/N 17-00235 .........$131.95 This headset helps to ensure four important goals of todays airline communications: safety reliability health protection convenience. The hands of the pilot are completely free from any communication chores, thus ensuring full prompt response to all flight events. Thus, the headset contributes to flight safety. By being tightly, yet comfortably, positioned on the pilots head, above the ear, the headset allows to separate all important communications from cockpit noise, thus contributing to flight reliability. Noisy cockpits produce fatigue and stress on pilots. The headset nearly eliminates this problem, thus contributing to the pilots health protection. Comfort and conveniene are evident by a simple look at the headset. AX40 straight cord up to 5 feet long. Stirrup pivot assembly, such that cups can provide universal fit; Comfortable, extra tick, headpad cushioning; cushioned ear seals for the best possible noise attenuation and comfort; Shielded cable for near perfect E.M.I./R.F.I. protection; Corrosion-proof chrome plated steel; parallel earphone wiring; adjustable volume control; 150 to 10,000 ohms compatibility; Universal mike boom assembly for precise placement of microphone; High performance, noise cancelling microphone. P/N 17-00236 .........$115.95
AX-20 HEADSET
Weighing in at 17 ounces with super-thick ComLeather ear seals and washable thick polar-fleece head pad, this headset is designed to maintain the comfort demanded by experienced pilots spending long hours in the left seat. With 24dB passive NRR and an additional 14-18dB ANR, noise wont prevent you from hearing radio traffic or using your MP3 and your Sat/Cell phone through the dual-input battery box. Auxiliary inputs are muted when communications are received. The Sure Power system shuts off ANR to preserve battery life when no audio is present longer than 15 minutes. A stereo/mono switch and dual volume controls optimize hearing. The chrome headband with carbon fiber print ear domes put this into a class of its own with the latest in style complemented with outstanding features and reliability. Includes a heavy-duty padded carrying case. Fixed Wing ....................... P/N 11-10580 .........$229.00 Helicopter......................... P/N 11-10579 .........$269.00
AX-40 HEADSET
The 17 ounce weight, open-cell foam PVC ear seals, wide and comfortable air-pillow head pad, and shallow speaker design make a very comfortable headset. With 24dB passive NRR and an additional 1418dB ANR, noise fatigue and clear communication shouldnt be an issue. A stereo/mono switch and dual volume controls optimize hearing. A powder-coated black headband complements the fresh look of onyx black ear domes. A lightweight carrying bag is included. P/N 11-10582....................$299.00
Weighing in at 17 ounces with super-thick ComLeather ear seals and washable thick polar-fleece head pad, this headset is designed to maintain the comfort demanded by experienced pilots spending long hours in the left seat. With 24dB passive NRR and an additional 14-18dB ANR, noise wont prevent you from hearing radio traffic or using your MP3 and your Sat/Cell phone through the dualinput battery box. Auxiliary inputs are muted when communications are received. The Sure Power system shuts off ANR to preserve battery life when no audio is present longer than 15 minutes. A stereo/mono switch and dual volume controls optimize hearing. The chrome headband with carbon fiber print ear domes put this into a class of its own with the latest in style complemented with outstanding features and reliability. Includes a heavy-duty padded carrying case. P/N 11-10578 .........$429.00
659
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Headset has a 34 dB noise attenuation rating making it one of the quietest passive headsets on the market today. The electret noise-canceling Microphone has stateof-the-art voice quality and is compatible with all current Comtronics intercoms and radio interface cables. Headset cables can be terminated with a single plug or configured with two plugs for general aviation use. Earmuffs can be adjusted up or down. All Comtronics helmets and headsets are designed for high noise environments and open cockpit flying including ultralights, powered parachutes, auto-gyros and all sport planes. Weight: 1 lb. (Black) P/N 11-07425 .................$227.95 MODEL-3000 HEADSET - The Model-3000 Headset offers 30 dB noise attenuation. They are light-weight and have dark green muffs. Ear seals are fluid foam-filled cushions and very comfortable. Can be fitted with our PRO-COM Helmet. Gel/Foam Ear Seals are optionally available. This headset can also be used for high noise environments Weight: 1 lb.(Dark Green) P/N 11-09942 .................$191.95 PRO-LITE SUPERIOR STEREO HEADSET - This headset uses either ultralight or general aviation audio and has a second pair of speakers for High Fidelity Stereo Music. Outstanding audio! Music Speakers Frequency Response: 15 - 25000 Hz 3.5 mm Stereo Music Jack on Ear Cup Comes with Music Cord Comfortable Gel/Foam Ear Seals can be added for extra comfort and noise attenuation NRR 33 - 45 dB Can also be used with our PROCOM Helmet Weight: 1 lb. w/ Electret Mic (Blue)........................... P/N 11-09943 .................$265.00 Listening Only (Blue) ........................... P/N 11-07429 .................$165.00 COM-AIR MODEL-5000 GENERAL AVIATION HEADSET - Similar to Model-3100 Headset General Aviation Plugs and Audio Can also be fitted with our PRO-COM Helmet Also available is a General Aviation - to - Ultralight Adapter Gel/Foam Ear Seals can be added Weight: 1 lb. (Black) P/N 11-09944 .................$265.00
COMTRONICS ULTRA-PRO FULL FACE Comtronics Full-Face fiberglass helmets are complimented by an Air Channel technology vent system, quick release shield system, padded chin bar, adjustable chin and top vents, rear exhaust vents, breath spoiler, padded D-ring retention system, UV clear protects paint and graphics, and DOT approved. The helmet interior has a comfortable liner, fitted ear cups with a pair of 2-inch speakers to enhance audio reception and built-in electret microphone. Color choices: Metallic White, Metallic Silver, Gloss Black, Flat Black, Graphic Red (pictured), Graphic Blue (pictured), and Graphite Metallic. Sizes available: Small, Medium, Large, X-Large, and XX-Large.See sizing chart above. ...........................................................................$479.95
Each includes: Two helmets and the intercom specified. System Aero-Pro Aero-Pro Headset Ultra-Pro 2000 Ultra-Pro 2000 Intercom Part #
Each includes: Two headsets and the Intercom specified. System Aer-Com Aer-Com Aer-Com Aer-Com Headset Model 3100 Model 3100 Model 3000 Model 3000 Intercom Ultra-Com II Dual-Com II Ultra-Com II Dual-Com II
Aero-Pro Ultra-Pro Standard Ultra-Com II 11-07401 Aero-Pro Ultra-Pro Standard Dual-Com II 11-07402
Each includes: Two helmets, two headsets and the intercom specified. System Aero-Pro Aero-Pro Headset Pro-Com Pro-Com Intercom Ultra-Com II Dual-Com II Part # 11-07417 11-07418 Price $780.00 $830.00
COMTRONICS HELMETS
Helmet Size XX-Large X-Large Large Medium Small Helmet Size Selection Chart Head Size 7-5/8 & up 7-3/8 to 7-5/8 7-1/8 to 7-3/8 6-7/8 to 7-1/8 6-5/8 to 6-7/8
COMTRONICS ACCESSORIES
Description Helmet Bag - Fleece Lined Coiled Cord - Helmet/Headset Option Gel/Foam Ear Seal Cushions Face Shield - Clear Face Shield - Smoke Ulta Paq II - Heavy duty pack for the Ultra-Com II intercom Dual Paq II - Heavy duty pack for the Dual-Com II intercom Peak Visor Windscreen - Foam / Dynamic Windscreen - Leather / Dynamic Windscreen - Foam / Electret Windscreen - Leather / Electret Ultra to GA adapter Ultra to Heli Adapter GA Dual Plug Part No. 11-07437 11-07438 11-07439 11-07440 11-07441 11-07442 11-07443 Price $47.75 $45.00 $39.95 $29.85 $29.00 $34.95 $39.95
COMTRONICS ULTRA-PRO 2000 - Earmuffs are attached to a spring steel wire frame which is secured to the inside surface of shell. This arrangement provides a more positive seal for noise reduction caused by the engine, propeller and wind. The UltraPro 2000 Flight Helmet is available in Blue, Metallic White, Metallic Silver, Metallic Red, Metallic Wine, Gloss Red, and Gloss Black. Sizes include Small, Medium, Large, X-Large, and XX-Large.......$344.95
COMTRONICS ULTRA-PRO STANDARD - The ULTRA-PRO Standard Helmet also has a plush fully upholstered liner and beaded foam inner shell with the new ultra-soft chin pad design. A feature unique to the Comtronics ULTRA-PRO Standard Helmet, the flip-out ear muffs allow easy entry and ability to converse with a student or passenger while making pre-flight inspections. The Ultra-Pro 2000 Flight Helmet is available in Blue, Metallic White, Metallic Silver, Metallic Red, Metallic Wine, Gloss Red, and Gloss Black. Sizes include Small, Medium, Large, X-Large, and XXLarge ...........................................................................................$344.95
11-07444 $8.60 11-07445 $9.95 11-07446 $9.95 11-07447 $9.95 11-07448 $9.95 11-09433 $129.95 11-09957 $57.95 11-09805 $57.95
Interface cables are designed to connect our helmets or intercoms to your transceiver. Different interface and custom cables available. Cable For: Part No. Price Icom A6/A24/A14 11-07450 $129.95 Vertex VXA 220/300 11-07451 $110.95
PLEASE SEE AIRCRAFTSPRUCE.COM FOR A COMPLETE LISTING OF MODELS AND PART NUMBERS.
660
Rugged Air brings new stereo audio performance with the same proven reliable cup and headband design. With Clear Hear stereo speakers and a 24 dB noise reduction rating ATC will come through loud and clear. Always be heard with the all new designed EM56 noise reflective cup microphone with wind blocking foam mic muff. Other features include volume control, 3.5mm music input port for Ipods and MP3, Foam Fit ear seals, and adjustable stainless steel headband. Finish it off with a backup ATC push to talk, gold plated plugs, tough molded Y-Block, and Total Shield cabling. The Rugged Air RA454 headset is the perfect choice for all of your flying adventures. Full Factory 7 Year Warranty. P/N 13-09911 ........................$148.95
Headset with 24 db NRR, Clear Hear performance audio speakers, volume control and 3.5mm music input jack for Ipods and MP3. With Foam Fit ear seals, stainless steel headband and Deep Pocket ear canals student pilots and flight instructors will enjoy the all day comfort of the RA250. Never miss an instruction with the superior Clear Hear 50mm audio performance speakers. Always be heard with the all new designed EM56 noise reflective cup microphone and wind block foam mic muff. 7 year factory warranty Rugged Air is bringing new audio technology with the same proven reliable cup and headband design. Finish it off with gold plated plugs, tough molded Y block, music input port, Total Shield cabling, and EM56 noise reflective microphone the RA200 is the perfect choice for all of your aviation adventures. P/N 13-09292 ........................$106.00 Rugged Air brings new audio technology with the same proven reliable cup and headband design. With Clear Hear performance speakers and a 24 dB noise reduction rating ATC will come through loud and clear. Always be heard with the all new designed EM56 noise reflective cup microphone with wind blocking foam mic muff. Other features include volume control, 3.5mm music input port for Ipods and MP3, Foam Fit ear seals, and adjustable stainless steel headband. Finish it off with Military grade U174 plug, tough long lasting coil cord, and Total Shield cabling. The Rugged Air RA600 headset is the perfect choice for all of your flying adventures. Full Factory 7 Year Warranty. P/N 13-10015 ........................$148.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Rugged Air aviation headset with 24 db NRR, Clear Hear performance audio speakers, dual volume control stereo weather proof push to talk on the dome and 3.5mm music input jack for Ipods and MP3. With Foam Fit ear seals, stainless steel headband and Deep Pocket ear canals student pilots and flight instructors will enjoy the all day comfort of the RA900. Never miss an instruction with the superior Clear Hear 50mm audio performance speakers. Always be heard with the all new designed EM56 noise reflective cup microphone and wind block foam mic muff. 7 year factory warranty Rugged Air is bringing new audio technology with the same proven reliable cup and headband design. Finish it off with gold plated plugs, tough molded Y block, music input port, Total Shield cabling, and EM56 noise reflective microphone the RA900 is the perfect choice for all of your aviation adventures. P/N 13-09293 ........................$199.00
Rugged Air brings new audio technology with the same proven reliable cup and headband design. With Stay Put full flex boom, Clear Hear performance speakers and a 24 dB noise reduction rating ATC will come through loud and clear. Always be heard with the all new designed EM56 noise reflective cup microphone with wind blocking foam mic muff. Other features include volume control, 3.5mm music input port for Ipods and MP3, Foam Fit ear seals, and an adjustable stainless steel headband. Finish it off with Military grade U174 plug, tough durable coil cord, and Total Shield cabling. The Rugged Air RA620 headset is the perfect choice for all of your flying adventures. Full Factory 7 Year Warranty. P/N 13-10016 ........................$199.00
The Rugged Air RA950-ANR aviation headset with Active Noise Reduction, Clear Hear performance audio speakers, dual volume control stereo, and easy access 9v battery pack with mono/stereo switch. With urethane Gel ear seals, fully adjustable spring steel headband and Deep Pocket ear canals, pilots and flight instructors will enjoy the all day comfort of the RA950-ANR. Never miss ATC with the superior Clear Hear ANR audio technology blocking out the background noise. Always be heard with the all new designed EM58 noise cancelling microphone and wind block foam mic muff. 2 year factory warranty Rugged Air is bringing new ANR audio technology with the same proven reliable cup and headband design. Finish it off with gel ear seals, comfort top head pad, quick change 9v battery compartment, Total Shield cabling, and EM58 noise reflective microphone the RA950-ANR is the perfect choice for all of your aviation adventures. P/N 13-09294 ........................$374.00
661
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This headset-helmet-intercom-radiolink does it all! Wear the headset with or without the helmet. Fly without the intercom or link up to the passenger as well as to your radio. The Radiolink handles everything for you. Lightweight, comfortable and easyto-wear. Tops in performance, comfort and reliability. Self-powered. 3-year warranty. Complete! 2 helmets with face-shields, headsets with builtin intercoms, push-to-talk switch and radio Interface. Please specify radio.
Description Comunica Headset Blue Accessories Helmet Pad Front and or Back Helmet Pad Side Comunica PTT Green Stick Throttle Comunica Headset Solo flight plug Part No. CSLINKB Part No. CSLPADBANLONG8 CSLPADBANSHORT8 CSLPTTS CSLSPLG Price $189.00 Price $10.00 $10.00 $43.00 $10.00
Pink Powder Puff Pilot headsets, available in PNR and ANR models, are built by a leading avionics manufacturer that specializes in FAA-qualified aviation headsets. Each Powder Puff Pilot headset is hand-made by skilled engineers, and built with an electret microphone and advanced special noise attenuation technology to provide a comfortable audio environment. Both models feature a flexible boom assembly that allows you to adjust the mic to a position that's just right for you. Powder Puff Pilot is so confident of the quality of our headsets, we offer a 3-year warranty on all headset parts and service. Another guarantee: the distinctive Powder Puff Pilot logo in pink on pink on the non-mic earcup is certain to keep flyboys' hands off your headset! Operating Instructions: ANR, PNR. Specifications and Noise Attenuation Data: ANR, PNR . Warranty. Active Noise Reduction (ANR) or Passive Noise Reduction (PNR)? The ANR headset can isolate, offset, and cancel environmental noise. Compared with conventional (PNR) headsets, the ANR model reduces background noise to provide a quieter, more comfortable flight. Its noise-canceling circuitry increases comfort and decreases pilot fatigue, improving communication and safety. This ANR model accommodates both stereo and mono intercom systems. The PNR model offers a more affordable optionespecially suitable for student pilots and passengersdelivering a perfect combination of noise reduction, clear sound, and comfortable fit. PNR headsets obstruct annoying noise and amplify communication signals for crystal clear voice transmission. Description Powder Puff ANR Headset Powder Puff PNR Headset Part No. 11-08095 11-08096 Price $285.95 $182.95
Visco-elastic foam sewn into cool, washable wear-resistant fabric. Eliminates top-of-head hot spots. Self-wicking fabric controls heat buildup by evaporative cooling of perspiration. Eliminates bob and roll when mounting external equipment. Lighter weight than other liners. Fitting only takes a few minutes. Testing shows these helmet liners reduce skin temperature 1.5F compared to existing liner systems. Both liners come in four thicknesses: 1/4, 3/8, 1/2 and 5/8. The most commonly used thickness is 3/8. Visit our website for Cleaning Instructions, and Sizing
Zeta Helmet Liners Size Thickness Part No. Price Size Thickness Part No. 12 12 12 12 13 13 13 13 14 14 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 11-09857 $89.95 15 11-09858 $89.95 15 11-09859 $89.95 15 11-09861 $89.95 15 11-09862 $89.95 16 11-09863 $89.95 16 11-09864 $89.95 16 11-09866 $89.95 16 11-09867 $89.95 17 11-09868 $89.95 17 11-09869 $89.95 17 11-09871 $89.95 17 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 Price 11-09872 $89.95 11-09873 $89.95 11-09874 $89.95 11-09875 $89.95 11-09876 $89.95 11-09877 $89.95 11-09878 $89.95 11-09879 $89.95 11-09881 $89.95 11-09882 $89.95 11-09883 $89.95 11-09884 $89.95
High class anthracite look, metal frame - hand adjustable, no tools required. Very comfortable headband resulting in no pressure points due to light overall weight Operates as mono or stereo headset with volume and balance controls and very good audio quality. Super soft gel ear seals with soft material allows for a good acoustic seal even if you are wearing glasses. Very high passive noise suppression figures over the full audio band. Filtered, noise canceling microphone. Gold plated connectors and high quality, long life cable. Reversible microphone boom. The headset features two volume control knobs - one on each earcup. Specifications: Stereo and mono operation, Soft silicone gel filled earcups, Gold plated Headphone and Microphone plugs, Metal swivel gooseneck and metal microphone boom, Extremely light and strong at only 20.5oz / 580g, Excellent passive noise reduction rating of 27dB, Clear frequency response from 20-17,000Hz, distortion free through entire range, Adjustable open foam cushioned headband, Quick response noise canceling filter amplified electret microphone with wind muff, Conforms to FAA TSO C57a and TSO C58a P/N 11-09437 .........$127.00
14 14
Zeta II Helmet Liners Size Thickness Part No. Price Size Thickness Part No. 15 15 15 15 16 16 16 16 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 11-07970 $89.95 17 11-07971 $89.95 17 11-07972 $89.95 17 11-07973 $89.95 17 11-07974 $89.95 18 11-07975 $89.95 18 11-07976 $89.95 18 11-07977 $89.95 18 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 Price
11-07978 $89.95 11-07979 $89.95 11-07980 $89.95 11-07981 $89.95 11-07982 $89.95 11-07983 $89.95 11-07984 $89.95 11-07985 $89.95
662
HEADSETS
HS-1A Headset features: * Earcups of high-density acoustic foam * High fidelity speakers * Electret, noise-canceling microphone * Gold-plated microphone and headphone plugs *High-grade, multistrand wire * Stereo/mono capability * Large, dual controls * Microphone muff * Adjustable headband with easy thumb screws * Quality foam ear seals and light weight add to overall comfort * Sleek, all-Black design with ASA silver wings silk-screened on each earcup * Sturdy and reliable - yet reasonably priced for maximum value * Lifetime warranty. HS-1 Headset features: * Lifetime warranty * Stereo / mono capability * Earcups of high-density acoustic foam * High fidelity speakers for clear, natural sound * Electret, noise-canceling microphone reduces background noise and allows clearest voice transmission * Gold-plated mic & headphone plugs ensure best connection & resist corrosion * High-grade, multi-strand wire improves cable life * Large, dual controls for quick, easy volume adjustment of each ear * Microphone muff * Adjustable headband with easy thumb screws eliminates hot spots and accommodates eyeglasses and any head size * Quality foam ear seals and light weight add to overall comfort * Sleek, all-Black design with ASA silver wings tastefully silk-screened on each earcup * Sturdy and reliable - yet reasonably priced for maximum value. ASA Airclassics Headset HS-1A ........ P/N 13-06671 ..................$113.95 The Standard SafetyCell (pictured)utilizes sophisticated solid state circuitry to mix your cell phone and radio signals together and bring them into your headset where you can hear them clearly. It is small enough to fit in the corner of your flight bag and only weighs 6 oz. It does not require any batteries. It is compatible with any cellular telephone that accepts a hands free system (i.e. has a 2.5mm jack on the phone). Some phones do require an adapter to work properly. This unit works without batteries so you must have a VOX style intercom for it to work properly. NOTE: This will only work in an extremely quiet environment; the Standard SafetyCell is not amplified. The Amplified SafetyCell is similar to the Standard SafetyCell but power packed with features. It is our most popular model. The amplified SafetyCell filters your radio and cell phone signals, cleans them up and then amplifies your cell phone volume by as much as 600%, depending on your phone/headset combination. This is the unit you will want if your plane is on the noisy side or if you have mature ears. Must be plugged into your VOX mic jack to work properly. It can also be used with the optional battery pack for out of the plane use. The Bose 6 Pin SafetyCell model is for those that have a built in Bose headset and do not use the Bose battery pack. This model is an amplified SafetyCell that is especially altered for the Bose headset circuitry. No batteries are required. The Bose 6 pin model fits between your headset and the panel to give you seamless intergration of your cell phone and radios. The standard Bose locking connectors are supplied. The Helicopter SafetyCell amplifies the cell phone by an incredible 12db and uses the standard military (NATO Style) single plug interface. This is the loudest SafetyCell we make! Safety Cell Standard ...................................P/N 11-03003 ...........$99.00 Safety Cell (Amplified) .................................P/N 11-01350 .........$156.95 Safety Cell Bose 6 pin .................................P/N 11-03009 .........$269.00
Features: AVCOMMs exclusive P/NR audio technology Perfect for kids or those who need a smaller headset Simple & affordable desigN Larger volume control knob easy for a child to use Ultra-lite Neodymium speakers Lighter weight for added comfort Higher noise attenuation Acoustic mic muff included Full 5 yr factory warranty.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Features: AvComms exclusive P/NR audio technology Full spectrum stereo response Each ear cup features an independent volume control Ultra-lite Neodymium speakers Built in Push-toTalk M-65 mic w/active filtering chip 4-way adjustable wire boom Deluxe Comfort package incl. Full 5yr factory warranty P/N 11-02261 ........$178.50
Features: Exclusive P/NR technology and plug and fly design Converts from general aviation to helicopter use (both cables included) Full flex boom Ultra-lite Neodymium speakers Each ear cup features an independent volume control M-65 microphone with active filtering chip Deluxe Comfort Package incl. 5yr factory warranty P/N 11-02262 ..........$256.95
Features: P/NR audio technology and full spectrum stereo response Ultra-lite Neodymium speakers M-65 microphone with active filtering chip Full flex boom Built-in push-to-talk Monostereo switch built into the cord Each ear cup features an independent volume control Deluxe comfort package with deluxe gel ear seals Full 5yr warranty. P/N 11-02263 ........ $228.95
Features: Simple & affordable P/NR performance Incredible voice clarity Higher noise attenuation Ultra-lite Neodymium speakers Volume control and easy to adjust stainless steel headband Acoustic foam ear seals and acoustic mic muff M-65 microphone with active filtering chip Lightweight; 13.4 oz. 5yr. factory warranty. P/N 11-02259 .........$109.85
AVCOMM ACCESSORIES
FLIGHT BAGS
P3-A01 P3-002 P3-A02 P3-A03 P1-005 P1-006 P1-007 P1-009 P1-004 P1-022 P1-024 P1-041 P2-001V2 P2-004 P2-005 P2-009 AC-I0410 P2-010 P2-120 P2-121 Personal headset bag Duffle style flight bag Deluxe duffle style flight bag Deluxe flight bag Foam ear seals - pair/jumbo Foam ear seals - pair/small Foam ear seals - pair/large Deluxe gel ear seals - pair Deluxe cloth ear covers-black Acoustic mic muff Acoustic mic muff AvComm deluxe head pad Deluxe PTT switch Adapter - GA to helicopter Adapter - helicopter to GA Headset extension cord - 5ft. Solderless Radio Adapter Headset splitter Gen. aviaiton coil cord - AC-747 Gen. aviation straight cord Part No. 11-02275 11-02276 11-02277 11-02278 11-02279 11-02280 11-02281 11-02282 11-02283 11-02284 11-02285 11-02286 11-02287 11-02288 11-02289 11-02290 11-02269 11-02291 11-02292 11-02293 Price $18.50 $32.75 $53.85 $72.75 $10.75 $11.75 $11.95 $23.75 $6.95 $3.35 $5.75 $15.80 $37.75 $38.65 $41.75 $47.85 $59.90 $57.50 $39.95 $48.70
We are glad to offer you the opportunity to trade-in your old headset and upgrade to a new top-of-the-line headset. There is a chart below which contains the trade-in values for you current headset as well as the headsets that are eligible for our trade-in program. All headsets must be in working condition with all original accessories included. Full credit will be given if your headset meets our criteria. All trade-in headsets are subject to inspection. Some headsets due to their age do not have any resale value and will not be returned to the customer. One headset per trade-in. Only applies to the purchase of: Lightspeed Zulu Bose A20 David Clark X-11 Beyerdynamic HS600 Sennheiser HMEC 460 Telex Stratus 50 Digital
Trade-up Model Headset Bose X David Clark X11 Telex Stratus 50 Sennheiser HMEC 400 Series Any David Clark* Any other manufacturer headset Trade Credit Amount $350 $325 $325 $300 $150 $50
COMFORT ACCESSORIES
*Will accept the following headsets (H10-13.4, H10-20, H10-30, H10-56, and H10-60) ** All Headsets must be equipped with current style plugs**
663
MICROSYSTEM ACCESSORIES
Part No. Radio Equipment Description Price 11-05368 Twin Jack Adapter Converts the headset to twin jack plugs. $163.95 11-05369 Audio Adapter Connects a Walkman or mobile telephone. $190.00 11-05370 Radio Adapter * Connects one headset to a radio. $423.95 11-05371 Radio Interface unit * Connects one or two headsets to a radio. $434.95 Powers two headsets and a radio. For Type B connections only and these radios: ICOM Radio/Power Inter- A3, A22, A6, A24 and ICA5, A23 with the 11-05378 $421.95 CT-44 adapter. Vertex Standard VXA-100, face unit * 120, 150, 200, 210 with the CT-44 adapter. All other radios will require special order. Velcro Mount PTT 11-05372 Velcro fixing PTT Switch. $75.00 Switch Screw Mount PTT 11-05373 Screw fixing PTT Switch. $53.75 Switch 11-05374 PTT Extension Lead Two Metre extension lead for PTT Switch. $64.25 PTT Connector and 11-05375 Special PTT connector with two metre lead. $29.25 Lead Audio Input/Output Connects a Walkman to an Audio 11-05376 $39.95 Lead Adapter or Power Interface. Connects a mobile telephone to an $54.50 Audio Adapter. Connects aircraft battery to Power Interface. $54.50 Used to filter aircraft power supply. $116.95 Used with very noisy power supply. $58.75 Used to prevent feed-back with Icom A2/ 11-05382 Radio Power Filter $90.25 A20 Radios. Radio Power Adapter Used to connect Icom A6/A24 radios to 11-05383 $114.95 11V13 a Power Interface. VHF Antenna -Short 11-05384 Antenna for use with airband radios. $93.00 Flexible VHF Antenna -1/4 11-05385 Antenna for use with airband radios. $100.00 Wave Whip 11-05386 Antenna Extension Lead Five metre extension for antenna. $45.50 11-05387 Adapter LA-25 Used to connect Cobra FRS and GMRS radios. $25.00 11-05388 Adapter LA-30 Used to connect Yaesu VXA 100 radios. $25.00 Used to connect Yaesu VXA 11-05389 Adapter LA-44 $80.00 100/120/150/200/210/220 radios. Mobile Telephone Lead * 11-05379 Power Supply Lead 11-05380 Power Supply Filter 11-05381 Large Power Filter 11-05377 11-05390 11-05391 11-05392 Used to connect Icom A5/A6/A23/A24 radios. Used to connect Vertex Stadard radios. Used to connect Yaesu VXA 300/700 radios. Used to connect various radios to a 11-05393 Power Lead Adapters Power Interface. Adapter CT-44 Adapter CT-91 Adapter CT-96 $47.50 $46.00 $46.00 $44.75
MICROSYSTEM PACKAGES
Package Contents Price One Micro System Headset, Dual Micro System Charger, One Headset $565.00 Switching Adapter, One Headset Bag One Micro System Headset, One Headset Coupling Adapter, One $466.95 Headset Bag Two Micro System Headsets, Dual Dual Micro System Charger, One Headset 11-05342 Headset $1,032.00 Switching Adapter, One Headset CouPackage pling Adapter, Two Headset Bags One Micro System Headset, One MiSingle cro System Helmet, Dual Micro SysHeadset11-05343 tem Charger, One Headset Switch- $924.00 Helmet ing Adapter, One Helmet Visor, One Package Headset Bag, One Helmet Bag Add-on One Micro System Headset, One Headset- Micro System Helmet, One Headset 11-05344 $826.00 Helmet Coupling Adapter, One Helmet Visor, Package One Headset Bag, One Helmet Bag Two Micro System Headsets, Two MiDual cro System Helmets, Dual Micro SysHeadset- tem Charger, One Headset Switch11-05345 $1,749.00 Helmet ing Adapter, One Headset Coupling Package Adapter, Two Helmet Visors, Two Headset Bags, Two Helmet Bags
MICROSYSTEM COMPONENTS
Part No. System Equipment Micro System 11-05346 Headset 11-05350 Micro System Helmet 11-05351 Micro System Helmet 11-05352 Micro System Helmet 11-05353 Micro System Helmet Helmet Visor 11-05354 Standard 11-09310 High Visibility Visor 11-05364 Leather Helmet 11-05347 Headset Coup. Adap. 11-05348 Headset Switch Adap. 11-05349 Dual Charger 11-05356 Visor Extension 11-05357 Helmet Bag 11-05358 Headset Bag 11-05359 Headset Exten. Lead 11-05360 Panel Exten. Lead 11-05361 Headset Panel Adap. Description Price Self contained intercom headset. $419.00 $268.95 $268.95 $269.95 $268.95 $78.95 $83.75 $348.95 $40.75 $20.75 $117.95 $48.75 $14.75 $12.85 $102.95 $123.95 $88.00 $131.95 $166.95 $123.95 $169.95 $443.95 $40.25 $33.75 $109.75 $40.00
*Please specify the make and model that will be used with this product.
EU certified protective helmet. S EU certified protective helmet. M EU certified protective helmet. L EU certified protective helmet. XL Attaches to the helmet with screw fixings. For use with Lynx helmets Soft leather helmet for headset. Connects two headsets together. Switch-on a single headset. Wall charger headsets. Wind deflector chin guard for visor. Cloth bag for a helmet and visor. Cloth bag to protect a headset. Used to extend the headset leads. Extension lead with panel socket. Converts lead socket into panel. Used to connect several 11-05362 Headset Lead Splitter headsets together. Connects several interface 11-05363 Headset Lead Comb. units together. 11-05365 Helmet Goggles For use with either type of helmet. 11-05366 Double Helmet Bag Large bag for complete systems. Connects in-line with a headset Radio Splitter + and provides connections for an 11-07092 Coiled Radio Lead additional device. Connecting different radios to 11-07093 Coiled Radio Leads portable interface equipment. Connecting different radios to 11-07094 Straight Radio Leads portable interface equipment. Charges two headsets at the 11-07095 Car Charger same time. 11-07096 Audio Output Lead
Connecting professional recording equipment to the Micro System
The Pilot System is a range of headsets and helmets for use in light aircraft and helicopters. The main advantage of these products are that they provide an integrated headset and helmet system for use in aircraft which have standard twin jack intercom equipment already installed.
Part No. 11-05394 Description Price Standard general aviation headset. $446.95 Interchangeable lead for Pilot 11-05395 Twin Jack Headset Lead $71.75 headset. Interchangeable lead for Pilot 11-05396 US NATO Headset Lead $97.50 headset. Interchangeable lead for Pilot 11-05397 UK NATO (Euro) Headset Lead $78.25 headset. System Equipment Pilot System Headset + Lead
NOTE: Pilot System uses the same helmet, helmet visor, visor extension, leather helmet, helmet goggles, helmet bag, headset bag, and double helmet bag as the Micro System. Order part numbers as shown for Micro System Components.
The relai System is a range of headsets and helmets for direct connection to hand-portable radios. This equipment also provides the facility to use a helmet with the headset and is used mainly by pilots of single seat aircraft, Paramotor pilots and airport ground crew.
*Please specify the make and model of radio that will be used with the Relai System Headset.
Description
Relai System Headset + Radio Module. Lynx Avionics Relai System headsets to be used with the following radios: Alinco, Cobra, Delcom, Icom A2/A20/ A21,JRC,Maxon,Motorola,Radio Shack, Yaesu FT-23R,YAESU 2000 Lynx Avionics Relai System headsets to be used with the following radios: ICOM A3/A4/A6/A22/A24 ICOM A5/A23 Allows Lynx Avionics Relai System headsets to be used with the following radios:ICOM A3/A4/A6/A22/A24/ ICOM A5/A23
HELMET SIZES:
To obtain the correct size of helmet, use a tape measure to measure the circumference of your head just above the ears. Small: 55-57cm Medium: 57-59cm Large: 59-61cm Extra Large: 61-63cm. Small: 22 Medium: 23 Large: 23.5 Extra Large: 24.5
NOTE: Relai System uses the same helmet, helmet visor, visor extension, leather helmet, helmet goggles, helmet bag, headset bag, and double helmet bag as the Micro System. Order part numbers as shown for Micro System Components.
LYNX ACCESSORIES
Part No. Spare Parts 11-05403 Ear Seals Type 1 Foam (Two) 11-05404 Ear Seals Type 2 Gel (Two)
Microphone Wind Shield Large (37mm ) Microphone Wind Shield 11-05406 Small (25mm )
Description
For use with all Lynx headsets For use with all Lynx headsets Used in an open cockpit. For use with all Lynx headsets. Used in an enclosed cockpit. For use with all Lynx headsets.
11-05405
664
PUSH-TO-TALK SWITCHES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ECONOMY PUSH-TO-TALK SWITCH - Similar to PT-300, this top quality switch is offered at considerable savings. Features gold contacts for durability. Fully guaranteed. P/N 11-12100 ................... $13.75 DAVID CLARK C10-15 PORTABLE PUSH-TO-TALK SWITCH Compatible with all general aviation headsets, recommended for use with David Clark. Dual plunger switch assures positive contact. High quality features are incorporated in every aspect of this switch. P/N C10-15 .......................$67.75 PTT-400 PORTABLE PUSH-TO-TALK SWITCH - Designed so that the pilot may push downward to invoke the radio transmit function, instead of the traditional sideways activation of typical strap-on PTTs. Secures to the top of the vertical handle of the contol yoke with provided velcro tape. Housed at the top of a thin, 1/2 dia. cylindrical enclosure, the soft-touch red push button is rated for 50,000 failure-free operations. 5ft. coiled cable terminates with standard plug & jack. Fast and easy plug-in installation, in virtually any aircaft. P/N 11-02072 ...........$33.80 SIGTRONICS PUSH-TO-TALK SWITCH - This versatile yoke mounted switch features a sealed aluminum alloy case and mounts in a .380 diameter hole. Button is red thermoplastic. P/N 11-02926 ...................$21.75 NAV-DATA PUSH-TO-TALK SWITCH - Finally, an affordable Push-to-talk switch. Heavy duty construction. With dual internal contacts. Also equiped with a strap to attach to any yoke control. P/N 13-06089 ....................$24.95
MODEL 711K
COTTON CANVAS HELMET FOR DAVID CLARK HEADSETS Brown with Leather Ear Cut-Outs Small.......................P/N 11-10525-S............. $61.75 Medium ...................P/N 11-10525-M ............ $61.25 Large ......................P/N 11-10525-L ............. $61.50
MODEL 711L
FLEECE LINED GOATSKIN HELMET FOR DAVID CLARK HEADSETS Black (Small) ..........P/N 11-10515-S..............$75.85 Black (Medium).......P/N 11-10515-M .............$79.75 Black (Large) ..........P/N 11-10515-L ..............$79.75 Black (X-Large).......P/N 11-10515-1 ..............$79.25 Brown (Small) .........P/N 11-10520-S..............$75.85 Brown (Medium) .....P/N 11-10520-M .............$79.75 Brown (Large) .........P/N 11-10520-L ..............$79.75 Brown (X-Large) .....P/N 11-10520-1 ..............$79.85
MODEL 711M
MESH FOR DAVID CLARK Small.......................P/N 11-10555-S..............$65.75 Medium ...................P/N 11-10555-M .............$64.75 Large ......................P/N 11-10555-L ..............$65.75 X-Large ...................P/N 11-10555-XL............$65.75
PROFLIGHT PTT SWITCH - Quality, affordable Pushto-Talk switch by ProFlight. P/N 13-10444 ....................$18.95
MODEL 712
TRADITIONAL GOATSKIN FLYING HELMET Black (Small) ..........P/N 11-10530-S..............$57.65 Black (Medium).......P/N 11-10530-M .............$57.65 Black (Large) ..........P/N 11-10530-L ..............$57.65 Black (X-Large).......P/N 11-10530-1 ..............$57.65 Brown (Small) .........P/N 11-10535-S..............$57.65 Brown (Medium) .....P/N 11-10535-M .............$58.25 Brown (Large) .........P/N 11-10535-L ..............$57.65 Brown (X-Large) .....P/N 11-10535-1 ..............$57.65
TELEX 66T TRANSISTORIZED MICROPHONE - Dynamic, noise-cancelling, hand-held mic. Built-in amplifier is adjustable for full transmitter output. Meets specifications for aircraft and mobile applications. Impedance 50-600. Wt: 9oz. Complete with 5 ft. coiled cord and hanger bracket. Also available with right-angle plug - specify model 66TRA. P/N 66T ..................$141.95 Right angle plug ................P/N 66TRA .............$139.50
MICROPHONES
MODEL 712C
TRADITIONAL COTTON CANVAS FLYING HELMET Small.......................P/N 11-10550-S..............$49.50 Medium ...................P/N 11-10550-M .............$49.50 Large ......................P/N 11-10550-L ..............$49.50 X-Large ...................P/N 11-10550-1 ..............$52.25
MODEL 712L
Black (Small) ..........P/N Black (Medium).......P/N Black (Large) ..........P/N Black (X-Large).......P/N Brown (Small) .........P/N Brown (Medium) .....P/N Brown (Large) .........P/N Brown (X-Large) .....P/N 11-10540-S............. $59.50 11-10540-M ............ $59.50 11-10540-L ............. $59.50 11-10540-1 ............. $59.50 11-10545-S............. $59.50 11-10545-M ............ $59.50 11-10545-L ............. $61.25 11-10545-1 ............. $58.50
DAVID CLARK M-I/DC AMPLIFIED DYNAMIC HEADSET MIC - The M-1/DC Amplified Dynamic headset microphone is a noise canceling type designed to operate in place of carbon and amplified dynamic microphones. P/N 11-09230 ...........$71.75
Note: Specify size by completing part no. with -S, -M, -L, or -1 for XL. Small (19-20) Med.(21-22) Large(23-24) XL(25-26)
DAVID CLARK M-1A AMPLIFIED DYNAMIC HEADSET MIC - The M-1Amplified Dynamic headset microphone
is a noise canceling type designed to operate in place of carbon and amplified dynamic mics. P/N 11-09225 ..........$67.85 HEADSET MICROPHONE A1060 BLACK - Proper shielding improves noise immunity in aircraft with heated windshields, power inverters, and other sources of electrical noise. Fits all C40 Model Headsets (David Clark, Softcomm, Telex, etc.) A1060 fits all C40 Models ...........................P/N 11-04838 ...........$28.75 Microphone windscreen covers all headsets .P/N 11-04840 .............$1.85
Now available for aviation helmets the David Clark patented combination flex/wire boom allow for easy, perfect microphone positioning. Each kit is complete with attachment assembly, microphone & cover, and boom with 16 cord for installation. M-7A mic and flex/boom assy Kit for Aviation helmets (High impedance / Civilian radio systems. Model 40688G-24 P/N 11-00866 ..... $105.95 M-87/A1C mic & flex/boom assy. Kit for Aviation helmets (Low impedance/military radio systems. Model 40688G-23 P/N 11-00867 ....... $84.95
665
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Description Comfort covers David Clark Style (sold as a pair) Mic Muff -Protects mic on all David Clark and standard size headset mics. This is not a foam muff. Mic Protector M77 Gel Earseals - Provide optimum comfort and fit all David Clark Headsets. David Clark Undercut Comfort Gel Ear Seals Foam-Filled Ear Cushions - Soft and durable covers with an all polyurethane core. Fits all David Clark headsets. Foam Headband - A light, foam filled headband which snaps on all David Clark Headsets for great comfort. H20-10 Gel Ear Seals Headset Bag- Nylon Carry bag, Black on Black. DC M-4 Mic Muff
Bluetooth (wireless) technology allows the use of Bluetooh cellphone and iPod / MP3 player with any General Aviation headset. GA Version P/N 11-06553 ...........................$249.00 Helicopter Version P/N 11-06613 ...........................$274.00 Bose Version P/N 11-06614 ...........................$299.00 Military Version P/N 11-09226 ...........................$349.99
Electret Microphone -Matches David Clark M-4 or 11-05896 $45.75 equivalent. DC Mic Muff - Fits standard electret 11-09201 mic. Foam mic muff w/O-ring. $3.35
Use with an iPod or iPhone to stream music to up 2 different BlueLink Adapter at the same time. Features: Bluetooth 2.1 + EDR, compatible with Bluetooth receivers, Made-for-ipod and works-withiPhone Bluetooth Transmitter, Multi-stream stereo music streaming capability, Tiny size, smaller than other Bluetooth Transmitters for iPods, iPhones, Bluetooth 2.1 + EDR, compatible with Bluetooth receivers ........................ P/N 11-09254 ......$59.99
Mic Muff M-7 - Designed to operate in place of carbon and amplified dynamic microphones. It will not operate 11-08282 $79.95 in circuits that do not supply a DC bias voltage. Low-Hi Impedance Adapter 11-08283 $159.95 Stop Gap - These eyeglass adapters place a soft coupler between the side of the head and the ear seal to 11-04785 $4.85 prevent any noise leak and assure a comfortable fit.
STRAIGHT CORD (5 FT) WITH PJ-068 & PJ-05 40133G04 - Increases the versatility of the H10-60 headset.
Plugs into the dome connector. P/N 11-05948 .....$76.50
Connect your headset to your cell phone using Avcomms cell phone adaptor. Allows you to have conversations on your cell phone through your headset. Gold plated plug for improved conductivity. For GA dual headsets. P/N 11-09340 ......$89.95
COIL CORD (5 FOOT) WITH PJ-068 & PJ-055 PLUGS 40133G-05 - Increases the versatility of the H10-60 headset. Plugs into the dome connector. P/N 11-05949 ...$106.95
COIL CORD (5 FOOT) WITH U-174/U PLUG 40133G-06 Increases the versatility of the H10-60 headset. Plugs into the dome connector. P/N 11-05950 .....$78.50
This bluetooth adaptor allows wireless telephone connections to Lynx equipment. It can be used with an audio adaptor or any interface from the latest range of portable radio equipment. All handsfree functions can be controlled from the adaptor. When used with radio equipment, it supports the radio priority audio mute function and any bluetooth audio is automatically reduced in volume during radio reception. In addition, to further simplify use in an aircraft, the adaptor will automatically answer telephone calls after three rings. Features: Rechargeable (USB), providing a minimum of eight hours talk time and three hundred hours standby time from each charge Plug-in connection lead Built-in belt clip, may be mounted for convenience using velcro. P/N 11-09457 ...................$99.00
PLUG ADAPTER 18253G-16 - Converts PJ-068 & PLUG ADAPTER 18253G-18 - Converts U-174/U to PLUG ADAPTER 18253G-19 - Converts NATO to CLOTH HELMET - To accommodate David Clark headsets.
Size 7-1/4 ................ P/N 11-04783 ............$191.95 Size 7-1/2 ................ P/N 11-04784 ............$198.50
The Bluetooth Audio Adapter allows wireless connections to a Lynx Micro System headset and can also be used with two separate audio or telephone leads. The adapter is powered from the headset. or from a Radio/Power Interface, and does not require charging. Once paired with a telephone, all of the main handsfree functions can be controlled from the adapter, including: voice dialling. call transfer. call reject and last number redial. The adapter can also be used with audio players to make a wireless music connection. The adapter can be used with Lynx Audio Input/ Output Leads, Audio Output Leads or Mobile Telephone Leads. The leads may be used in any combination. When used with the appropriate lead, the adapter allows the connection of mobile telephones, music players and sound and video recording equipment. For connection to recording devices. the adapter provides output at Microphone Level (with Audio input/Output Lead) or Line Level (with Audio Output Lead). The adapter is particularly useful for adding audio devices to an existing system or to increase the number of audio connections in general. The adapter is backwards compatible with all Lynx Micro System products. P/N 11-10446 .................$449.00
666
HEADSET ADAPTERS
CELL PHONE HEADSET ADAPTERS
Our cell phone headset adapters connect your cell phone to the headset and intercom system in your aircraft. The pilot can use the cell phone while ATC communications remain the priority at all times. These adapters enable you to close flight plans or get IFR clearances from the aircraft, contact FBOs or other services from the aircraft, or call anyone you wish. Will not work with Nokia 8000 series phones. Universal adapter .......................P/N 11-02230 .........$109.95 Bose adapter ..............................P/N 11-02231 .........$122.95 Helicopter adapter ......................P/N 11-02232 .........$146.95 PS Engineering, Incs The Muse, as simple and low cost way of interfacing your favorite entertainment device into your aviation headset. The Muse is a miniature Personal Music Device (PMD) that allows connection of an entertainment source directly to your headset without complicated wiring or permanent installation--no rocket science here. About the size of a 9-Volt battery, The Muse mates with stereo or mono headsets and has no effect on radio transmissions or intercom functions. P/N 11-09045 ........................... $349.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
General Aviation Digital Audio Recorder Adapter: This product allows you to interface your Digital Audio/Video Recorder with the aircraft intercom system. Great for creating your own aerial videos without excess cabin noise. Works with devices that use a 3.5mm Stereo External Mic Input like GoPro HD Video Cameras and Digital Voice Recorders. P/N 11-10531 ............. $49.95 The ANR Adapter is a product that will transform a current aviation headset into a high-tech active noise reduction unit. The ANR Adapter comes as a kit and includes a pair of inserts that fit more than 20 different headset models. Installation requires fitting the inserts, drilling a small hole in one earcup for the power receptacle, and soldering the original cable leads to the kit replacement parts. (uses two 9-volt batteries). IMPORTANT: It is mandatory that you use silicone gel type earseals. The original earseals (dry or liquid filled) are not as airtight as gel seals, and in addition do not dampen sound and vibration as effectively. The result is that the ANR units will greatly underperform (20-50%) and will be more likely to malfunction. David Clark type ...................... P/N 11-11955........... $159.50 Peltor ....................................... P/N 11-11956........... $179.00 A standard ANR upgrade kit comes with a 6 long addon power cable which tie-wraps to your original audio cable, and it requires that you drill a 1/4 hole in the left earcup (next to where the main cable enters the cup). The AMP cable replaces your original cable and has the DC power wires, audio wires and mic wires all in 1 cable. The result is more esthetically pleasing and no additional hole is required in the left earcup. P/N 11-03012 ................$29.95
The PSA0017C addresses the problem of attempting to use an aviation headset to listen to a portable music device while connected to the aircraft intercom. The PSA0017C resolves both of these issues easily. Implementation of dual low-noise amplifier stages cleanly boosts music signals to levels expected by general aviation headsets, while providing enough power to clearly hear the entire range of audio frequencies without distortion. Active auto mute silences the music whenever activity is detected on the intercom, thus ensuring that intercom activity and ATC communication is never missed. The included 9 volt battery provides 2530 hours of useful battery life. The low battery indicator provides advance indication of battery expiration. P/N 11-06246............................ $99.95 The IRC0014 series intercom recording cables addresses the problem of attempting to use a standard microphone interface to record a signal intended to drive a 600 ohm aviation headset. The integrated electronic circuitry steps the signal down to levels expected by the recording device, preventing oversaturation of the recording device and thereby eliminating any distortion. Additional protection is provided via AC coupling, ensuring that only the audio signal is passed while DC power remains isolated to the respective equipment. At low levels, DC power interference can reveal itself as a high-pitched squeal in the recorded audio. If enough voltage is present, irreparable equipment damage can occur. P/N 11-06247............................ $29.95 This adapter works with your existing intercom by pumping your music into any available mic jack, allowing it to be distributed through the intercom to everyone wearing a headset. Plug one end into the aircraft's mic jack and the other into your media player's headphone jack. * Compatible with ipod, iphone, mp3, CD, laptops, and most other portable media players * Music in your headset without costly upgrades * Listen to music through the aircrafts speaker during pre-flight * Plugs into standard mic jack * Just Plug and Play! No more wearing uncomfortable in-ear headphones under your aviation headset. No need for an expensive new intercom or new headset. This will work in any intercom system with an available mic jack. Maintain the comfort and quiet of you current headset; just add your favorite music! Also works great in many airliners. P/N 11-07541................$19.95 For headsets with single 5/8 wide headband springs (Aviall, David Clark, etc.) and Telex ProAir 2000E and ANR-type headsets. Eliminates top-of-the-head pressure. P/N 11-02858 ............................. $11.60
Connects twin jack headset or helmet Works with speakers from 8 to 600 Ohms Accepts dynamic, electret or carbon microphones ANR power to microphone jack tip Headset volume control Maintains selective PTT operation and muting Water resistant bayonet locking connector Supplied with fixing kit Twin Jack Headset Converter ................ P/N 11-09306 ....$220.95 Single Jack Headset Converter .............. P/N 11-09307 ....$220.95 US NATO Jack Headset Converter ........ P/N 11-09308 ....$221.95 UK NATO Jack Headset Converter ........ P/N 11-09309 ....$220.95
HEADSET CUSHION
PatchCord has electronic circuitry specifically designed to enable direct hook-up between a 600 headphone jack and the mic jack of tape recorders and / or most video cameras. The PatchCord has been designed to enable you to record on any tape recorder or video camera, both sides of all your radio communications and all mic equipped persons in the aircraft when used with intercom. If not equipped with intercom, PatchCord enables you to record both sides of all your radio communications if aircraft radio has sidetone. The most advantageous way to use PatchCord is with the intercom and voice actuated tape recorder. Student Pilots: Great learning aid Playback of previously recorded tape enables students to review the entire flight lesson, whether it be ATC clearances or flight instruction Great study aid for the FAA written test Save recorded tapes of flight lessons as a momento of your student pilot experiences. Other Pilots: Assists in studying for additional FAA ratings Back up your memory and your notations by recording your IFR clearances Record in-flight ATIS and weather reports, enabling you to play back and review in detail that part of briefing you need to know Use tapes to improve your radio proficiency Have your own tapes if you have a problem with ATC. P/N 13-01456 ...................$34.75
MICROPHONE WINDSCREENS
PA-10S - Flightcom Denali. Sigtronics S-58. Peltor 7000 Pro Gt. Bose ANRs. PN 11-05809 ........ $1.25 M-87 - Any headsets using M-87 Microphones
(usually the mics in helmets such as Gentex or Gallet) PN 11-05810 ...................$1.20 For considerably less than the cost of a new headset, you can upgrade the headset you already own to improve comfort and performance. Youll experience improved intelligibility and transmission clarity, and youll enjoy pain-free, cool, dry ears. Comes with: A-SoftTop Headset Cushion, B- SoftSeal Ear Cushions, C- SoftSkin Ear Seal Covers, D- HushKit Passive Ear Cup Noise Attenuation Kit, & E- MicMuff Microphone Cover. David Clark Upgrade Kit ....................P/N 11-07808 ...................$129.00 Bose Headset Upgrade Kit .............P/N 11-06309 .....................$92.50
667
HEADSET ACCESSORIES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Individual Oregon Aero Upgrade components are available for the Headset & Helmet models listed.
OREGON AERO SOFTTOP HEADSET CUSHIONS - Eliminates top-of-head pressure. 100% plush sheepskin wool. Keeps head cool or warm. Moistureproof, self-wicking action. Flexible leather backing. Customized mount of either rubber extrusion or nylon with hook/loop wrap. 10006 SoftTop Headset Cushion for David Clark and David Clark Clones ............................................................... P/N 11-10905 ... $31.00 10006D SoftTop Headset Cushion with D ring for David Clark and David Clark Clones............................................ P/N 11-10906 ... $30.85 10020 SoftTop Headset Cushion for Bose Aviation Headset X* and Bose A20..................................................... P/N 11-08679 ... $29.95 10016 SoftTop Headset Cushion for FlightCom Denali, LightSpeed QFR, Sennheiser 100/300, Telex Air 3000,3100,3500,4000,4100,4105,A NR 150, Echelon 100/150, ANR1-D,MRB-600 ... P/N 11-10915 .... $31.00 10017 SoftTop Headset Cushion for Peltor 7000 series P/N 11-10903 ... $31.00 OREGON AERO SOFTSEAL EAR CUSHIONS - Conform to your head. 200-300% more volume for total comfort. Smooth, soft, washable synthetic leather cover over temperature and pressure sensitive visco-elastic foam core. Great with eyewear or earrings. Eliminate ear pressure. Attach with flange, adhesive ring or snap-on mount, depending on headset type. 20005 SoftSeal Ear Cushions (1 1/8) for David Clark and David Clark Clones............................................ P/N 11-10917 ... $49.95 20034 SoftSeal Ear Cushions for ANR David Clark and David Clark Clones other than X11 ...................................... P/N 11-10920 ... $49.95 20007 SoftSeal Ear Cushions for Bose Aviation Headset X* and Bose A20..................................................... P/N 11-08680 ... $49.95 20020 SoftSeal Ear Cushions for Peltor 7000 Series, LYNX, and Sennheiser HMEC 200/222 Headsets .............. P/N 11-10921 ... $56.75 20002 SoftSeal Ear Cushions () for SPH-4B*, SPH-5* P/N 11-10928 ... $49.95 20050 SoftSeal Ear Cushions () For Plastic Ear Cups In SPH-4* and HGU (Sonex) Helmets ............................... P/N 11-08681 ... $49.95 OREGON AERO SOFTSKIN EAR SEAL COVERS - Keep your ears even drier and cooler and add to product life by slipping SoftSkin Ear Seal Covers over SoftSeal Ear Cushions. Self-wicking reduces perspiration buildup. Especially helpful in hot, humid climates. They fit loose, not tight like a drum (this is important because tight cloth covers produce pressure on the ear, causing pain). 29118 SoftSkin Ear Seal Covers (1 1/8) for David Clark and David Clark Clones P/N 11-10930 ... $10.95 29034 SoftSkin Ear Seal Covers for 3/4 SoftSeal Ear Cushions P/N 11-10929 ... $11.00
The Worlds Greatest Headset Is the One You Already Own! With an Oregon Aero Upgrade! For best results and best value, we recommend the complete Headset Upgrade Kit which includes all necessary components custom-designed for these headset types.
MILITARY HEADSET UPGRADE KIT FOR DAVID CLARK TYPE HEADSETS Electret mic: 83006E. Dynamic Military Mic: #83006DM Includes: SoftSkin Ear Seal Covers, MicMuff Microphone Cover, HushKit Passive Ear Cup Noise Attenuation Kit, SoftSeal Ear Cushions, SoftTop Ear Cushions PN 11-06310..............$132.95 David Clark H10-76 P/N 11-07808.............$129.00 The J-Hook Aviation Headset Hanger is designed to be installed on one of the tube crossmembers in the cockpit of aircraft with exposed tubing upon which to hang your headsets when not in flight. These types of aircraft include Huskies, Cubs, Citabrias, etc. Machined from 6061-T6 aluminum with stainless steel hardware for a lifetime of service. Mounts on 3/4 or 7/8 tubing J-Hook Headset Hanger 3/4 .....................P/N 11-02409 .............$39.85 J-Hook Headset Hanger 7/8 .....................P/N 11-02410 .............$39.85 Hang your headset out of the way in a handy fold down bracket. Secure headset with hold down hook & loop strap. Headset Hanger - folds neatly out of the way when not in use. Strong extruded aluminum - black finish Mount with 2 screws Made in USA..P/N 11-08615 .............$34.85 No longer will you have to throw your expensive headset on the glare shield, the seat, or hang it on the control wheels. This easy to install device gets the headset up and out of the way so that it is easier to get into and out of the cockpit without fighting loose headsets. It also protects the headset by getting it up and out of the way. P/N 11-09312 .................. $18.95 Gel ear seals conform to the shape of your head, resulting in an airtight fit which is required for proper anr performance. If your earseals are the older dry foam or liquid filled they must be replaced. P/N 11-03011........ $21.50 Quickly being able to call ATC or flight service provides a backup in the event of a radio failure. Stay in touch with family and loved ones to let them know your status. Control your Bluetooth enabled MP3 player and cell phone though the easy to use interface. Delivers the highest quality audio possible to all general aviation headsets. With a backlit screen and keypad the E6B and flight timers are easy to use in any light condition. Free downloads for new flight tools and functions. Integrated E6B Flight Computer. Wired port for cell and Satellite phones that dont have Bluetooth Input port allows GPS, XM music or any source to be used. Caller ID, direct dial, and redial functions. Voice dial feature with one touch. Download phonebook and call list entries and dial direct. Stream Bluetooth music and control with advanced control panel. Output port allows recording of ATC or narrate to a video camera. Automatic cut-out with radio / ATC transmissions. Ambient light sensor for day/night autodimming. Fuel timer keeps track of tank changes for you. 3 stopwatches let you keep track of time. Approach timer with two sets of approaches. Generates power required to operate most ANR headphones. Convenient and quick access with the included knee strap.
Description Comlink Pro Angel Blue Comlink Pro Angel Blue Heil Comlink Pro Angel Black Comlink Pro Angel Black Heli Comlink Pro Angel Green Comlink Pro Angel Green Heli Comlink Pro panel Power Cable Comlink Pro XL Interface Cable Comlink Pro Helicopter Panel Interface Cable Comlink Pro Helicopter Headset Interface Cable Part No. 11-08543 11-09208 11-08544 11-09209 11-08545 11-09211 11-08546 11-08547 11-08548 11-08549 Price $449.00 $449.00 $449.00 $449.00 $449.00 $449.00 $24.99 $24.99 $32.99 $36.99
HEADSET HANGER
OREGON AERO HUSHKIT PASSIVE EAR CUP NOISE ATTENUATION KIT - Testing shows the HushKit Passive
Ear Cup Noise Attenuation Kit performs better than ANR headsets in the 700-7000Hz mid-range where hearing loss Dramatically improves noise attenuation and intelligibility. 92005 HushKit Passive Ear Cup Noise Attenuation Kit for David Clark and David Clark Clones P/N 11-10934 ... $29.95 92056 HushKit Passive Ear Cup Noise Attenuation Kit for HGU-56 Helmets P/N 11-06312 ... $29.95 92050 HushKit Passive Ear Cup Noise Attenuation Kit for SPH-4, SPH-4B , SPH-5 or HGU (Sonex) helmets. P/N 11-06311 ... $29.95 OREGON AERO SOFTSEAL/HUSHKIT COMBO - An ear seal and insulation kit in one one giant shock absorber. Replaces triangular leather earpad or upgrades plastic Ear Cup. Eliminates pain. 28734 SoftSeal/HushKit Combo for Telex 750 and 850 ( thick) P/N 11-10918 ... $55.25 28034 SoftSeal/HushKit Combo for HGU Civilian Helmets ( thick) P/N 11-08682 ... $79.95 28118 SoftSeal/HushKit Combo for HGU Civilian Helmets (1 1/8 thick) P/N 11-08684 ... $79.95
Eliminates cockpit noise from radios and intercom. Greatly improves intelligibility. MicMuff functions as an acoustic baffle and must be used on all headsets installed in the communications system. Adaptable to all mics, electret or dynamic. Doesnt blow away. Amplified Dynamic MicMuff Mic Cover .............P/N 11-10937 ... $13.95 Electret MicMuff Mic Cover ...............................P/N 11-10938 ... $13.95 Military Dynamic (M-87) MicMuff Mic Cover .....P/N 11-10939 ... $13.95
EVERY HEADSET MICROPHONE USED IN AN INTERCOM SYSTEM MUST HAVE THE MICMUFF INSTALLED IN ORDER FOR THE MICMUFF TO BE EFFECTIVE! THE ONLY EXCEPTION IS PUSH-TO-TALK INTERCOM SYSTEMS.
668
AVIONICS ACCESSORIES
MIC & PHONE JACK HOUSINGS
SINGLE HOLE BLACK ALUMINUM HOUSING - Single-hole
aluminum housing for single cord headset jacks (Nexus Jack TJT-120). Description Part No. Price Single Hole Black 11-09989 $24.95 Single Hole Beige 11-09990 $24.95 Single Hole Aluminum 11-09991 $24.95
2 HOLE SURFACE MOUNTED MIC & PHONE JACK HOUSING - If panel space is scarce or you'd prefer
to locate your headphone jacks in a more convenient spot, this housing is perfect. Mounts flush to any flat surface. Heat-treated aluminum with a powder coat finish. Jacks not included. (See electrical section). Description Part No. Price Surface Mount, Black 10-01595 $16.50 Surface Mount, Beige 11-01120 $14.95 Surface Mount, Aluminum 11-01130 $14.95 TWO HOLE ALUMINUM HOUSING - Two-hole aluminum housing (no paint) for single cord headset jacks / Nexus Jack TJT-120. Description Part No. Price Two Hole Black 11-09994 $25.95 Two Hole Beige 11-09992 $22.00 Two Hole Aluminum 11-09993 $25.95
P-642A. Molded, cord mounting type. Screw-on shell. Headphone Stereo Plug 3-Circuit SWC 260 Takes SWL-12B mating jack P/N 11-08308 ..........$9.95 Headphone Mono Plug, 2-Circuit PJ-055B Takes JJ-034 mating jack P/N 11-04065 ..........$8.95 Microphone Plug, 3-Circuit PJ-068 Takes JJ-033 mating jack P/N 11-03918 ........$16.75 PANEL JACKS -Made to specification MIL-J-541. Contact springs are of special alloys for long life. Insulation is high dielectric strength phenolic. Tinned terminal lugs for 11-04936 easy soldering. Short frame. Mounts by 3/8-32 threaded bushing and nut. Open circuit until plug inserted.
11-03907 11-05995
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
2 HOLE RECESSED MIC & PHONE JACK HOUSINGS This versatile mic and phone jack housing has a powder coat finish. With this recessed housing in place in a side panel, your jacks are out of the way. Comes with a clamp to hold housing securely in place. Jacks not included. Size: 3.0" x 3.75" x 1". Description Part No. Price Recessed Mount, Black 11-01140 $18.50 Recessed Flush Mount, Beige 11-01150 $16.95 Recessed Flush Mount, Aluminum 11-01160 $19.75
Stereo Headphone Jack, 3-Circuit SWC-12B P/N 11-04936 ..........$2.55 Mono Headphone Jack, 2-Circuit JJ-034 ....... P/N 11-03907 ..........$3.65 Microphone Jack, 3-Circuit JJ-033 ................. P/N 11-05995 ..........$5.25 Insulated Flat Washer (SWC S1028) Tan...... P/N 04-00975 ....$0.29 ea. Insulated Flat Washer (SWC S1029) Black ... P/N 04-00976 ...$0.66 ea. Mini Stereo Jack 1/8 diameter ...................... P/N 11-09332 .........$3.85 Mini Stereo Plug 1/8 diameter....................... P/N 11-09333 .........$7.45
U-172/U MICROPHONE JACK (NSN 5935-00-6657599), Mates w/U-173/U, PJ-292, or MP-101. 2-conductor jack w/nickel-plated beryllium copper contacts assembled into nylon body.P/N 11-00697 ............ $5.50
4 HOLE SURFACE MOUNTED MIC & PHONE JACK HOUSING - If panel space is scarce or you'd prefer to
locate your headphone jacks in a more convenient spot, this housing is perfect. Mounts flush to any flat surface. Heat-treated aluminum with a powder coat finish. Jacks not included. (See electrical section). Housing only! Description Part No. Price Black wrinkle finish 11-01195 $18.95 Tan wrinkle finish (Pictured) 11-00365 $18.95 Aluminum (unpainted with holes) 11-00366 $18.95 Aluminum (unpainted NO holes) 11-00367 $17.85 4 HOLE RECESSED MIC & PHONE JACK HOUSINGS - Modified to allow plugs to enter from the opposite side, being recessed they are out of the way. When jacks are plugged in they are flush with the edge of the housing. Made of aluminum, with a powder coat finish. Comes bagged with housing, clamp, mounting screw. Dims: 4W x 5L x 1.06H; Cutout req.: 3.25W x 4.43L Description Part Number Price Black wrinkle finish 11-01939 $27.85 Tan wrinkle finish 11-01940 $28.75 Aluminum (unpainted with holes) 11-01941 $28.75 Mic & Phone Jack Bracket 90 degree under the dash. Also for switches, fuses etc. . A sturdy and attractive mount, sides are formed to hide wires, .063 thick heat-treated aluminum. Black wrinkle powder coat finish. Five styles to choose from for most any installation. Easily installed.
1/8 STEREO PLUG (3.5MM) Black plastic handle w/ solder terminals & cable clamp. P/N 11-00705 ............ $2.25 U174/U PLUG TP-101 - Mates with NEXUS Series
TJ-120and TJ-102 jacks and jack TJ-101. One piece monel contacts integrally molded into glass filled nylon plastic. P/N 11-09335 .......... $36.75
MIC OR PHONE JACK MOUNT VERTICAL 4 HOLE Bracket- (4) Hole Vertical for Mic & Phone Dimensions2.3w x 2.5h x 1.0 deep. P/N 11-01190 ......................$12.50
MIC OR PHONE JACK MOUNT HORIZONTAL 4 HOLE - Bracket- (4) hole horizontal for either Mic
or Phone Dimensions- 4.5w x 1.5h x 1.0 deep. P/N 11-01942 ......................$13.95
669
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
HEADSET EXTENSION This heavy duty extension allows a general aviation headset using PJ-068 & PJ-055B or equivalent plugs to be extended by 5ft. Ideal when aircraft radio or intercom does not allow headset cords to reach comfortably. P/N 11-10640 .......$47.75
MICROPHONE EXTENSION This heavy duty extension allows a .206 mic jack to be extended by 5ft. Great for customizing an aircraft with rear passenger microphone jacks. P/N 11-10625 .......$20.95 HELICOPTER HEADSET EXTENSION Extends a
headset that uses a U-174/U, U-93A/U or equivalent plug. 5 ft. in length. P/N 11-00688 .......$48.95
.206 JACK Y ADAPTER This adapter converts a headset with a single .206 plug into one with 2 (standard .206 mic & .25 phone plugs). Length: 9. P/N 11-00682 .......... $32.75 .25 JACK Y ADAPTER This adapter converts a headset with a single .25 plug into 1 with 2 (standard .206 mic & .25 phone plugs). Length: 9. P/N 11-00683 .......... $31.50 .206 PLUG Y ADAPTER This adapter converts a headset w/ dual .206 mic & .25 phone plugs into one plug (.206) headset. Length: 9. P/N 11-00684 .......... $33.75 .25 PLUG Y ADAPTER This adapter converts a headset w/ dual .206 mic & .25 phone plugs into one plug (.25) headset. Length: 9. P/N 11-00685 .......... $29.95
U-75/U EXTENSION Extends a headset which uses U-75/U plug 5 ft. in length. P/N 11-00689 .....$104.95
Y ADAPTERS
DUAL HEADSET Y ADAPTER This heavy duty
adapter converts one .25 phone jack into two. Perfect for those who want to connect two headphones to one a/c radio headphone jack. Can be used with stereo or mono headphones and jacks. Length: 2 ft. P/N 11-10610 ...........$27.90
DOUBLE HEADSET Y ADAPTER This heavy duty adapter converts one set of a/c radio panel jacks, (.206 mic and .25 phone) into two sets. Can be used with any general aviation headset using PJ-068 & PJ-055B or equivalent plugs. P/N 11-10635 ...........$58.25 DUAL MICROPHONE Y ADAPTER This heavy
duty adapter converts one .206 aircraft radio microphone jack into two. Perfect for those who want to add another push-to-talk position to the radio. Length: 2 ft. P/N 11-10615 ...........$29.95
TRIPLE HEADSET ADAPTER This high quality adapter converts a set of radio or intercom mic and phone jacks into 3 sets. Sets are one, three and five feet respectively. Great for adding a pair of headset to the back of the aircraft without requiring major installation. P/N 11-00680 ...........$79.95 DUAL HELICOPTER Y HEADSET ADAPTER This
adapter allow a single helicopter radio or intercom jack (TJ-120, TJT-120, TJT-102) to be used by two headsets. Length: 1 ft. Great for adding an additional space for headset without costly installation. P/N 11-00681 ...........$59.95
DIGITAL AUDIO RECORDER ADAPTER FOR GA HEADSETS - This adapter allows you to interface
your video recorder with the aircraft intercom system. Great for creating your own aerial videos without excess cabin noise. Can also be used to listen to music etc. by plugging into something like an iPod or MP3 player. P/N 11-10486 .......... $34.95 24 CONDUCTOR COIL CORD - This coil cord incorporates 24 individual 22-gauge wires, which is the minimum gauge required to connect typical PTT, Autopilot Disconnect, Map Light, Trim and other control wheel-mounted switches. The coiled section of the cord has a retracted length of 6 inches and a generous 18 inches of free length on either end, allowing electrical components to be connected without splicing additional wire. P/N 11-09937 ........ $249.00
This adapter reduces a single .206 microphone plug to a 3.5mm mini plug. 5 in length.(JB-35) P/N 11-02749 ..................$23.75
This adapter allows you to record conversations through your headset into a portable tape recorder. (JB-40) ............... P/N 11-02750 $15.75
VIDEO RECORDER ADAPTER GA/HELICOPTER This product allow you to interface your video recorder with the aircraft intercom system. Great for creating your own aerial videos without excess cabin noise. Records sounds transmitted through the intercom system only. Std Version ........................... P/N 11-00692 .......$29.95 Helicopter Version ................ P/N 11-00693 .......$38.75
Three-way splitter with USB output. USB charger output to 5V/500ma. Triple socket with 12V output. A fuse is included. DC 12V using only. P/N 11-09741 .......... $14.75
CD PLAYER GENERAL AVIATION ADAPTER This product allow you to interface your portable CD Player with a general aviation headset. ................. P/N 11-00694 .......$32.50 LOW TO HIGH IMPEDANCE ADAPTER This adapter
converts a low impedance mic & military headset into higher impedance for use in general aviation aircraft. Standard Version .........................P/N 11-10645 ... $67.95 Helicopter Version .......................P/N 11-00706 ... $74.50
670
This adapter allows you to plug your standard aviation headset into your zpc while using flight simulator to feed sound into your headset with high fidelity and mic for high quality verbal communication. Plug & play, no software needed. Requires a 9V battery, not included. Great companion to our fight-sim set-up. P/N 11-02751 .................$56.50 (TJ-101) Mates with series TP-120, TP-102 plugs and plugs PT-101, U-93-A/U, and U-174/U. Nickel Plated beryllium copper contacts molded into a black plastic body. P/N 11-02744 .......... $19.75 (TJ-105, U385/U, M64/22-01) Mates with series TP-105, U-384/U, M642/14-01. Nickel plated beryllium copper contacts molded into a red plastic body. P/N 11-02745 ...........$39.85
PC TO HEADSET ADAPTER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
IPOD/MP3 ADAPTER
AIRBUS ADAPTER
Model: PA-89/A20. Converts your 6-pin connector to a dual GA plug. Adapter measures approximately 21 P/N 11-09422 .................$46.75
Model: PA-89H/A20 Converts your 6-pin connector to a single helicopter plug. Adapter measures approximately 21 P/N 11-09423 .................$56.75
Description PA-50 Push-to-talk use with or without Intercom PA-70S Headphone Extension (5ft) PA-71 Microphone Extension (5ft) PA-72S Dual Headset Adapter PA-72H Dual Helicopter Headset Adapter PA-73S Dual Headphone Y Adapter PA-74 Dual Microphone Y Adapter PA-75 Helicopter to GA headset Adapter PA-76 GA to Helicopter Headset Adapter PA-77S Headset Extension (2 Jacks, 2 Plugs) PA-77H Helicopter Headset Extension (5ft) PA-78 Mono Replacement Headset Cable (Chrome Plugs) PA-79 Mono/Stereo Replacement Headset Cable (Chrome Plugs) PA-79DNC M/S Headset Cable: For use with PA-1779, PA-1776, PA-2 PA-80S GA Video Recorder/CD Player Adapter PA-80H Helicopter Video Recorder/CD Player Adapter PA-81 Airbus Aircraft Headset Adapter PA-82 Headset Adapter for ICOM A22,A24 Transceiver PA-82.4 Headset Adapter for ICOM A4 Transceiver PA-82B Bose Headset Adapter for IC-A6, A22,A24 PA-82H Helicopter Headset Adapter for IC-A6, A22,A24 PA-83 Europe NATO to US NATO Headset Adapter PA-84 US NATO to Europe NATO Headset Adapter PA-85 Headset Adapter for ICOM A5, A23 Transceiver PA-86A Amplified Cell Phone Adapter GA (Twin Plug) Version PA-86AH Amplified Cell phone Adapter Helicopter Version PA-86AB Amplified Cell phone Adapter (Panel Power) BOSE PA-87 Impedance Converter Hi (GA) to low Military PA-87H Impedance Converter Hi (Heli) to low Military PA-88 Amplified Impedance Converter low (MIL) to Hi (GA) PA-88H Impedance Converter Low (MIL) to Hi (Helicopter) PA-89B Power Supply for Panel Power BOSE Headset PA89/A20 Bose A20(6-Pin) to GA Adapter PA89H/A20 Bose A20(6-Pin) to Helicopter Adapter PA89A/A20 Bose A20(6-Pin) to Airbus XLR Adapter PA89BH Bose X panel Powered to Helicopter Adapter PA-90S Triple Headset Adapter PA-91 GA (Twin Plug) Headset to (.25) Single Plug Adapter PA-92 (.25) Single Plug Headset to GA (Twin Plug) Adapter PA-93B GA to Bose Plug Headset Adapter PA-93BH Helicopter Headset to Bose Plug Adapter PA-94 Helicopter Ground Crew Extension Cable W/PTT (3ft.) PA-95 Headset Adapter for Vertex Transceiver PA-96 PC to GA (Twin Plug) Headset Adapter PA-97 Airbus Plug to GA Headset Adapter PA-98 Inline Helicopter Volume Control PA-99 Inline GA Volume Control PA-100B Oxygen Mask Microphone Adapter for Bose Plug Headset
Part No. 11-07712 11-06517 11-10625 11-06518 11-03562 11-06519 11-10615 11-10650 11-10630 11-06520 11-00688 11-03563 11-03564 11-06521 11-00694 11-03565 11-03566 11-02116 11-03567 11-06523 11-06524 11-06525 11-06526 11-00618 11-03568
Price $18.95 $19.95 $20.95 $44.95 $59.95 $27.95 $29.95 $35.85 $37.95 $39.90 $48.95 $31.95 $35.95 $37.65 $32.50 $43.95 $39.95 $49.85 $40.95 $58.75 $58.75 $68.95 $68.95 $39.50 $88.95
11-06527 $111.95 11-06528 $159.95 11-06529 11-06530 11-10645 11-06531 11-03570 11-09422 11-09423 11-09997 11-09996 11-03571 11-00685 11-03572 11-06533 11-06602 11-06534 11-03574 11-03575 11-06535 11-06536 11-06537 11-06603 $51.95 $61.95 $67.95 $72.95 $69.95 $46.75 $56.75 $59.95 $85.95 $65.95 $29.95 $29.95 $57.95 $64.50 $80.95 $43.95 $39.85 $35.95 $49.50 $49.50 $76.85
TOP BACK
AWW PTT HOUSINGS - Housings measure 1 inch in length, 1/2 in diameter with a mounting width of 1/2. Mounts with (2) #4 countersunk screws. TOP...................P/N 11-07340 ........................ $112.95 P/N 11-07341 ......$113.95 HOUSING FOR MICROMINI MOMENTARY SWITCH
P/N 11-07342 ........................ $113.95
671
TEST EQUIPMENT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Designed specifically for internal timing of aircraft magnetos and for synchronizing magnetos to aircraft engines. Eliminates all guesswork and provides a greater safety factor by creating perfect timing quickly and easily. Simply attach three clips to the magnetos and adjust until both bright lights flash in sync and the buzzer changes pitch. Fail-safe circuitry, variable pitch buzzer. Heavy-duty 3x 5x 2-1/8 unbreakable case. Wt. 1.5 lbs. Complete with 18 gauge lead wires 36 long and instructions. P/N 12-01013 .......... $88.75 U.S. Industrial Equivalent ................P/N TP105 ................$56.85 The Aircraft Timing Indicator Model E25 is a unique device that locates the relative relationships between the crankshaft, magneto point openings, camshaft and valve timing. Easily attached to the propeller spinner with mounting bands that are included with the unit, the E25 quickly and accurately (within degree!) locates top dead center. The result: the all-aluminum Model E25 speeds up and improves the process of timing magnetos to the engine. With its easy-to-read dial and 18mm, hardened aluminum piston stop, the E25 is a snap to use. Note: Piston Stop is sold separately. PN# 12-18100 E25 Timing Indicator ............................. P/N 12-01014 ............. $59.50 Replacement Piston Stop ....................... P/N 12-18100 .............. $17.50 U.S. Industrial Equivalent TP102 ........... P/N 12-01167 .............. $59.75 Measures the change in inductance in the magneto coil when the points open and close. Simply shorting the clip leads together will not indicate a point closing, therefore eliminating any false reading caused by loss of contact to the magneto grounding terminal. Adjust magneto timing accordingly. 100% solid state, compact 3/4 x 3 x 5 size, long battery life. Color coordinated leads are 4 ft. long. Comes in strong anodized aluminum case. Dual Magneto Synchronizer w/Tweeter ........... P/N 12-16901 .....$43.50 Dual Magneto Synchronizer w/o Tweeter ........ P/N 12-16902 .....$38.75 Single Magneto Timing Light w/Tweeter .......... P/N 12-16903 .....$68.75
EASTERN ELECTRONICS TEST EQUIPMENT MAGNETO TIMING LIGHT - MODEL E50 HIGH VOLTAGE CABLE TESTER MODEL E5
Gives a fast, accurate test of high voltage aircraft ignition cables. Simply connect 3 wires, push test button and test is completed. The E5 will instantly indicate in its test window both good and defective cables - no waiting for indication to appear. Fail-safe circuitry. Heavy-duty lead wires. Compact 3 x 5 x 2-5/8 case. Wt. 1-1/2 lbs. P/N 12-01016 .......... $88.75
Eliminates guesswork by allowing you to locate the exact location and cause of your engines loss of efficiency. Field tester for 2 years by Teledyne Continental Motors, and approved for use on Teledyne Continental Engines by their Engineering and Field Services Group. Complete instructions with each unit. M models have built-in master orifice.* Not approved by TCM. E2A - for cylinders < 5 bore ...................P/N 12-01012 ......... $78.50 E2A-1000 - for cyl. > 5 bore ..................P/N 12-01017 .......... $78.50 E2M - for cylinders < 5 bore ..................P/N 12-01015 ........ $107.85 E2M-1000 - for cyl. > 5 bore* ................P/N 12-00692 ........ $107.85 E2A-12mm (Rotax) for cyl. < 5 bore ......P/N 12-00693 .......... $78.50 12 mm Adapter .......................................P/N 12-01018 .......... $15.65 18 mm Adapter .......................................P/N 12-18202 .......... $15.50 U.S. Industrial Equivalent........................P/N TP104 ............... $54.95 14MM Adapter.........................................P/N TP171 ............... $13.50 18MM Adapter.........................................P/N TP104-9A ......... $12.95
Master Kit Includes: Marksman Receiver UltraSonic Emitter Headphones 12 inch Air Probe Contact Probe Carrying Case Features: Converts & Amplifies Ultrasonic Sound Into Audible Natural Sound for Accurate Diagnosis. Finds Problems Before They Result in Major Breakdowns Frequency Response: 36,000 - 44,000 Hz Detects Air Brake, Compressed Air, Vacuum, EVAP System and Other Pressurized Leaks Quickly and Effortlessly Pinpoints Gear and Bearing Wear in Wheel Hubs, Transmissions, Transfer Cases, Differentials and Electric Motors. Check for Electrical Discharge Associated with Insulation Breakdown, Carbon Tracking and Arcing Finds Air and Water Leaks Passed Faulty Seals, Gaskets and Weather Stripping in Passenger Cabs, Trailers and other Non-Pressurized Enclosures. Power Requirement: One Standard 9-Volt Alkaline Battery Each for Receiver & Emitter. P/N 12-01745...........................$698.75 This small test kit is designed to allow the aircraft mechanic a convenient and economical way to purchase the basic small engine test equipment. This kit contains: 1 - TP104 Cylinder Pressure Tester, 1 - TP105 Magneto Timing Light, 1 - TP102 Timing Indicator, 1 - TP103 High Voltage Cable Tester, 1 - TP216 Tool Box P/N 12-02349..............$237.95
Comes complete with on-off safety valve to eliminate pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushings, etc. LESS THAN 5 BORE - Specifications: Orifice size is .040. precision gauges matched to within +/-2%. 18MM plug adapter. 24 pressure hose. Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request. Note: For use with engines of 5 Bore Diameter or smaller per AC43.13 REV 1B. P/N 12-02344 .......... $59.95 GREATER THAN 5 BORE -Specifications: Orifice size is .060. precision gauges matched to within +/-2%. 18MM plug adapter. Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request. Note: For use with engines with Bore Diameters greater than 5 per AC43.13 REV 1B. ........P/N 12-02345 .......... $69.75
Now you can conveniently check the calibration of your pressure tester before each use without disconnecting the tester. Comes with complete instructions. Includes hose and spark plug adapter. 5 Bore Diameter or smaller ........................P/N 12-02346 .......... $86.95 Bore Diameters greater than 5...................P/N 12-02347 .......... $92.50 This tool makes compression testing easy. Wrench free way to test that allows for exhaust system and baffling clearance. Tester is manufactured with quality-welded construction and offers a spark plug thread with O-Ring seal. It has a standard air fitting. .................P/N 12-01060 .......... $28.95 12mm Extension P/N 05-06883 .......... $31.85 A replacement plug adapter with an 8-1/2 reach to work around manifolds, baffiling, harnesses, support structures, and anything else that gets in your way. The T-handle lets you to screw and unscrew the extender into the port without a wrench. The quick connect coupler makes it a snap to hookup and disconnect your tester. Note: For use with ATS models 2E and 2EM Compression Testers. 1 lbs (0.5Kg) weight. 18MM aviation engine plug threads 8-1/2 long to clear obstacles Standard ............P/N 12-02380 .......... $33.95 Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Locate shorts without wasting fuses. Audio tone indicates positive with a high pitched tone and negative by a low pitched tone. Has 2 white LEDS that flood the work area with bright light. Power Probe III - Black ............................ P/N 12-02822.............$169.95 Power Probe III - Blue ............................. P/N 12-02821.............$169.95 Power Probe III - Red .............................. P/N 12-02820.............$169.95
POWER PROBE
672
A pneumatic systems test kit that allows aircraft technicians to test the aircraft deice boot system in the hangar, via shop compressed air, rather than having the need to operate the aircraft engines on the ramp or run-up area. For Gulfstream Astra G100, G150, and G200 aircraft. This test equipment will eliminate: The need to fuel and/or defuel the aircraft for engine operation and system testing; aircraft towing/ taxiing to and from the approved engine run-up areas; testing deice boot systems with loud aircraft engines; excessive man hours for aircraft engine operation and system testing. P/N 12-02936 ........ $610.00
CM WP ME HA AP LG
The Time-Rite unit is the number one choice of aviation mechanics for precisely timing engines. It is assembled by hand and tested to the strictest standards to preserve the original craftsmanship. The unit has specialized arms and calibrated scales to accurately locate Top Dead Center (TDC) and then enables you to set the timing angle with dead-on accuracy. Kit includes: One 18 mm Time-Rite unit, one 14 mm Cone to adapt for 14mm use, a complete set of scales for 14mm and 18mm engines, a complete set of arms for 14mm and 18mm engines, an instruction manual, and a fitted case. P/N 12-02872 ........ $599.95
The Protractor is a precision, highly accurate and simple to use device for checking, setting or changing propeller pitch. The resolution and repeatability is 0.05 degree and the accuracy is +/- 0.1 degree. It is powered with a standard 9 volt battery with approximately one year use life. The Angle Cube can be used for other angle measuring applications such as checking and adjusting wing incidence, rotorcraft blade angles and tail-dragger ground angles. Aside from aircraft or airboat use, the gage can be used for measuring or setting table saw blade angles, machining or drilling angles or any other application requiring precision angle measurement. Magnets on three sides can be used to hold the unit to appropriate surfaces. When the Angle Cube is magnetically attached to the protractor clip, the unit becomes a simple and accurate tool to measure blade angles. P/N 12-02640 .......... $93.85
4 mm diameter 1300mm working length (available in other lengths and diameters) Steel braid insertion probe, water and oil proof, temp to 90 C Forward view, 2 ways of articulation ...................... 120/120 up down Comfort grip with adjustable LCD screen Video output easily connects to capture device KIT includes: Flexible Portable Videoscope Battery Charger Standard Storage / carrying case Portable VideoScope 4MMX1300MM .........P/N 12-02583 ..... $6,545.00 Portable VideoScope Carry Case ...............P/N 12-02584 ........ $289.00
EP CS IN EL AV TO
The Model AT201 diagnostic Listening Tool is a versatile, time-saving tool which is ideal for use in any application where there is movement of mechanical parts, air, gas, or fluid. Ideal for use on commercial, general aviation, or homebuilt aircraft and helicopters for application such as air leak and vacuum detection, bearing wear, worn or chipped gears, engines, turbines, and compressors, hydraulics, fuel injectors, flow valves, instrument failure, and more. Audiotech Probe can quickly and accurately pinpoint the trouble spot so that the problem can be fixed quickly the first time. Diameter of small mic at end of probe is 3mm. AAA battery included. Perfect for homebuilders, A & Ps, A & Es, and A & Is. P/N 12-21420 .......... $18.50
AUDIOTECH PROBE
Full function, fuse protected, auto-ranging multimeter that measures AC/DC voltage, milivolts, amps, miliamps and microamps, resistance and audible continuity, capacitance, frequency, temperature (k type thermocouple included), data hold function, relative measurement function, transistor and diode test function. P/N 12-02703 .......... $39.95
MULTIMETER
1. 4.0 mm diameter 1300mm working length (available in other lengths and diameters) Steel braid insertion probe, water and oil proof, temp to 90 C Forward view, 2 ways of articulation 150/150 up down Universal type video out, easily connects to display and computer via USB cable. Built-in recorder and onboard hard drive with 40gig memory capacity. (optional-not included) KIT includes: Flexible Videoscope Probe (Interchangeable with other dia. Probes), Integrated video and lightcable 5ft in length, TFT LCD Display and VPU with built-in lightsource for clear, wide and magnified image, Rugged carrying case, Remote control for ease of operation at distances up to 6 ft. Digital Videoscope 4MMX1300MM .............P/N 12-02581 ..... $7,426.00 Heavy Duty Carry Case ..............................P/N 12-02582 ........ $389.00
PS BV
673
INSPECTION SCOPES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Visual Optics new video based inspection scope, the VS3610WW, gives you the latest in remote video technology. The Video Stik is for remote inspection of areas generally inaccessible to the naked eye. IT comes with a distal video camera at the end of a 36 shaft for internal inspection of engines, A/C systems, interior structures of walls, and other industrial and simi liar applications. Imaging and illumination is provided by a full color image sensor and dual solid state LEDs which are controlled by an on/off rocker switch. The 2.5 full color LCD screen allows the user to observe live video from the distal camera. The unit is powered by 4-AA batteries. The Video Stik is shipped with a protective case for storage. Accessory Mirror allows user to see 90 degrees to axis of the shaft. The Magnet accessory will pick up approx 1/4 lb. Features: High resolution remote color camera 2.5 full color viewing monitor 10mm shaft diameter Waterproof, Flexible shaft 36 standard shaft length High output LED illumination 5 hrs operation on 4-AA batteries (included) Mirror and Magnet accessories included Video Output for recording Poly pro storage case Specifications: Shaft Length: 36 Water Resistant Distal Tip Dia: 0.42 Maximum W/ Accessories: 0.46 Maximum Viewing Angle: 55 Degrees Viewing Distance: 0.4 to Infinity Resolution: 320x240 pixels Viewing Monitor: Color 2.5 LCD Video outport: RCA - NTSC signal Shaft Radius: 2.5 Minimum Power: Alkaline AA batteries (4) Battery Life: 4hours Storage Temp: -4F to 158F (-20 to +70) Operating Temp: 32F to 113F(0 to 45) Accessories: Mirror and Magnet Warranty: 1 Year. VS36-10WD - 36 Length, 10mm Diameter..... P/N 12-01744 .....$259.95 VS24-6W - 24 Length, 5.8mm Diameter ........ P/N 12-02690 .....$251.95 VS72-10W - 72 Length, 10mm Diameter ....... P/N 12-02691 .....$331.95
Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Model L Dia Description Part No. Price
VO18-4H 18 4mm VO24-4H 24 4mm VO36-4H 36 4mm VO18-6H 18 6mm VO24-6H 24 6mm VO36-6H 36 6mm
Halogen / Lithium Bulb/Mir12-01729 $291.95 ror/Magnet Kits Included Halogen / Lithium Bulb/Mir12-01730 $254.95 ror/Magnet Kits Included Halogen / Lithium Bulb/Mir12-01731 $351.95 ror/Magnet Kits Included Halogen / Lithium Bulb/Mir12-01732 $291.95 ror/Magnet Kits Included Halogen / Lithium Bulb/Mir12-01733 $303.95 ror/Magnet Kits Included Halogen / Lithium Bulb/Mir12-01734 $351.95 ror/Magnet Kits Included
Features: Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Highly affordable
VT-FLED SERIES - Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Model Length Diameter Includes Part No. Price Inspection Scope, VT2412-01739 $345.95 24 4mm Battery, White LED 4FLED Flashlight, Mirror, MagVT24net & Suitcase Style 24 6mm 12-01740 $292.95 Carrying Case 6FLED VT-FLUV SERIES - All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this. The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Model Length Diameter Includes Part No. Price VT24Inspection Scope, Battery, 12-01741 $375.95 24 4.3mm 4FLUV White LED Flashlight, UV Flashlight, Mirror, Magnet & VT2424 6mm Suitcase Style Carrying Case 12-01743 $375.95 6FLUV
THE SEEKER 200 VIDEO BORESCOPE SYSTEM - The Seeker 200 Video Borescope
Inspection System features a 2.4-inch LCD color monitor for real-time viewing, with a 12mm flexible camera probe that retains its configured shape for inspecting hard-to-reach areas. A standard 1-meter probe length is provided with the unit and optional probes up to 10 meters (32.8 feet) are available. The Seeker 200 is ideal for use in automotive maintenance, electrical repair, plumbing applications, HVAC/R and the visual inspection of otherwise inaccessible areas. Includes: 3.3ft(1m)optional: up to 16ft., Extension Tools: (Mirror, Magnet, Pick-Up Hook) , 1 9V Battery , Blow Mold Case , Instruction Manual. Working Temperature: 32 to 113F (0 to 45 C). Power Source: 1 9V battery .............P/N 12-02296 ..................$127.95
Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO LED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Briefcase style instrument case Highly detailed imaging with 7400 pixels High output LED lighting - 2 White LEDs in tip No bulbs to change - Ever Superior optics provide easier viewing Spring Lok Design - Longer reach w/o drooping Waterproof shaft Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Model L Dai VO18-10W/W 18 10mm VO24-10W/W 24 10mm VO36-10W/W 36 10mm VO48-10W/W 48 10mm Description LED / Lithium Mirror/ Magnet Kits Included LED / Lithium Mirror/ Magnet Kits Included LED / Lithium Mirror/ Magnet Kits Included LED / Lithium Mirror/ Magnet Kits Included Part No. Price 12-01735 $291.95 12-01736 $303.95 12-01737 $351.95 12-01738 $397.00
DELUXE PROFESSIONAL VIDEO INSPECTION SYSTEM - The Seeker 300 Video Borescope System offers a large 3.5-inch LCD color monitor and a 12mm or 5.5mm flexible, configurable camera probe with adjustable LED lighting. The Seeker 300 is ideal for use in automotive maintenance, electrical repair, plumbing applications, HVAC/R and the visual inspection of otherwise inaccessible areas. This Video Borescope Kit also includes a mirror, magnet and pick-up hook that can be attached to the end of the probe. Includes: 3.3ft(1m)optional: up to 16ft. Extension Tools: (Mirror, Magnet, Pick-Up Hook) . 1 9V Battery . Blow Mold Case . Instruction Manual. 12mm Probe .......................................P/N 12-02297 ..................$169.50 5.5mm Probe ......................................P/N 12-02652 ..................$256.95 WIRELESS VIDEO INSPECTION SYSTEM DCS400 - The Seeker 400
Video Borescope System is ideal for any application requiring the inspection of hard-to-reach or hard-to-see areas. 3.5in. (88.9mm) TFT-LCD Wireless Color Monitor, can be detached from the unit for remote viewing up to 32.8ft. (10m) away 3.28ft. (1m) Flexible Waterproof (IP67) Obedient Probe retains configured shape. Standard Length: 3.28ft. (1m). (17mm) diameter Camera-tipped Probe has built-in adjustable LED lighting. Records in Still Photo (JPEG) and Video (AVI), or view it live. Records up to 3 hours continuously NTSC or PAL compatible. Choices of 10 menu languages. Includes: MicroSD Memory Card, Extension Tools: (Mirror, Magnet, Pick-up Hook), Video Interconnect Cable, USB Cable, Magnetic Base Stand, AC Adaptor, 4 AA Batteries, Blow Mold Case, Instruction Manual 12mm Probe .......................................P/N 12-02298 ..................$299.99 9mm Probe .........................................P/N 12-02653 ..................$288.00 5.5mm Probe ......................................P/N 12-02654 ..................$427.95
674
INSPECTION SCOPES
Features a fixed 12mm diameter, 1 meter long, waterproof camera probe and USB connection to view images and video on your computer. USB computer interface. Works with Windows 7, Vista and XP. 12mm (0.47 in.) diameter camera tipped probe is flexible and strong. Camera pixel resolution: 320 x 240. Adjustable light intensity from two built-in LEDs. 1m (3.28 ft.) flexible shaft retains configured shape to suit various applications. Probe is water, oil and dust proof to IP67 standards. Elegant ergonomic design. Clear image quality both up close and far away. P/N 12-02655 ....................$49.99
CM WP ME
The Seeker 300 Video Borescope System offers a large 3.5-inch LCD color monitor and a 5.5mm flexible, configurable camera probe with adjustable LED lighting. Ideal for use in automotive maintenance, electrical repair, plumbing applications, HVAC/R and the visual inspection of otherwise inaccessible areas. This Video Borescope Kit also includes a mirror, magnet and pick-up hook that can be attached to the end of the probe. 3.5 (88.9mm) Color LCD Screen for crystal clear image, superb clarity and viewing effect. 5.5mm or 12mm diameter Cameratipped Probe is flexible and strong with built-in adjustable LED lighting, and is slim enough to perform automotive engine check-up. Flexible Probe retains configured shape to suit different inspection needs. Probe Length: Standard: 3.28ft. (1m), Optional: up to 16ft (5m). View findings instantaneously Includes: 3.28ft. (1m) Flexible Probe, Extension Tools: (Mirror, Magnet, Pick-Up Hook), 1 9V Battery Blow Mold Case Instruction Manual. 5.5 mm Probe .....................................P/N 12-02652 ..................$256.95 12mm Probe .......................................P/N 12-02297 ..................$169.50 3 Meter Probe Extension ....................P/N 12-02396 ....................$34.25 2 Meter Probe Extension ....................P/N 12-02397 ....................$25.75
Features wireless transmission of video and images to your computer up to 30 feet away and a Skype enabled streaming video for remote viewing over the internet. Built-in radio transmitter wirelessly transmits (up to 10 feet) live video signal to the RCV100 USB video receiver, this enables the video to be viewed on a Windows PC and streamilined live over the internet. Works with Windows 7, Vista and XP. 12mm (0.47 in.) diameter, 1m (3.28 ft.) long, flexible-obedient, far focus camera-tipped probe is water, oil and dust proof to IP67 standards. Optional probe extensions of 1m, 2m, and 3m (3.28 ft., 6.56 ft., 9.84 ft.) are available for the 12mm probe. In addition to the 12mm (0.47 in.) diameter probe, this unit can also accept optional 9.0mm (.35 in.) and 5.5mm (.22 in.) camera tipped probes. Adjustable light intensity from built-in LEDs. Flexible-obedient probes retain configured shape to suit various applications. Includes: Custom Hard Case, Transmitter Handle with 12mm Diameter x 1m Long, Flexible-Obedient Probe 3 Accessory Tools: (45 Mirror, Magnetic Pick-Up, Pick-Up Hook), RCV100 Wireless USB Video Receiver, Interface Cable, Software on Mini-CD Instructional Manual, 3 Year Limited Warranty. P/N 12-02656 ..................$171.95
HA AP LG EP CS IN EL
Portable, hand-held, complete borescope system with monitor, camera and video. Kit Includes: Charger Lens module cable 39.4 (1 M) SD memory card 30.45 and 60 mirrors USB to 5-pin mini-B cable Video cable Cleaning cloth Cotton swabs Instructions Heavy duty water proof blow mold case P/N 12-02299 ..................$857.00
A portable, hand-held borescope system with monitor, camera, video and wireless data transmission. Operate the instrument anywhere without the cable. The complete kit includes: Main monitor, 33 ft (1m) camera probe, 33 ft (1m) SD card, 30 45 and 60 mirrors, instructions and waterproof blow mold carrying case. Borescope System .............................P/N 12-02301 ...............$1,114.00 Probe Extensions - 3 Meters ..............P/N 12-02396 ....................$34.25 Probe Extensions - 2 Meters ..............P/N 12-02397 ....................$25.75 With SoundStik, you hear the problem; it lets you hear at frequencies you cant hear! All moving parts. gases, and liquids pruduce a broad range of sounds because of friction with their surroundings. The SoundStik is designed to listen to a non-audiblc unique range of Ultra Sounds which are extremely useful in the automotive, industrial and service trades. Ultrasound Technology allows smart, cost effective preventative maintenance and quick findings of potential or existing problems in major areas including air/vacuum leaks, electrical noise, friction wear, seal/fit integrity and fluid turbulence...............P/N 12-02711 ..................$399.00
VOscopes new user friendly picture and video storage device allows you to directly download and save from our popular VS 10mm VideoStik series inspection scope. An excellent way to document and provide important and supportive information to your customers. A must-have for mechanics or professionals working in automotive, marine, maintenance, law enforcement, diesel or home inspection trades. .....................P/N 12-02710 ..................$165.00
The Seeker 400 Video Borescope System is ideal for use in Plumbing, Construction and Restoration, HVAC/R and any other application requiring the inspection of hard-to-reach or hard-to-see areas. 5.5, 9, or 12mm diameter probe, 1m (3.28 ft.) long, flexible obedient and waterproof to IP67 standards. 3.5 in. (88.9mm) diagonal TFT-LCD Wireless Color Monitor can be detached from the unit for remote viewing up to 32 ft. (10m) away. 4x zoom feature. 180 image flip feature. Both monitor and handle use rechargeable li-ion batteries which can be charged at the same time using the included oneinto-two charging cable. System comes complete with batteries and charger. Two adjustable LED lights inside the tip of the probe illuminate dark spaces for clear inspection. View results in real-time, record video and capture/save still photos (JPEG), up to 3 hours of video (AVI). NTSC or PAL compatible. USB and video interconnect cables are included. Built-in magnets and stand facilitate hands-free operation. Choice of 5 menu languages: English, French, Spanish, Chinese and Portuguese. Comes with 45 mirror, magnetic pick-up and pick-up hook accessories for probe tip Includes: Custom Hard Case, Pistol Grip Camera Handle, 9mm Diameter, 1m (3.3 ft.) Long Flexible-Obedient Probe, Detachable, Wireless Monitor, 2GB Micro SD Memory Card, 3 Accessory Tools: (45 Mirror, Magnetic Pick-Up, Pick-Up Hook), USB and Video Interconnect Cables Built-in Magnets, 2 li-ion Rechargeable Batteries with AC Adapter/ Charger, Instruction Manual, Three Year Limited Warranty. 5.5mm Probe ......................................P/N 12-02654 ..................$427.95 9mm Probe .........................................P/N 12-02653 ..................$288.00 12mm Probe .......................................P/N 12-02298 ..................$299.99 3 Meter Probe Extension ....................P/N 12-02396 ....................$34.25 2 Meter Probe Extension ....................P/N 12-02397 ....................$25.75
AV TO PS BV
675
1
Preclean inspection area. Spray on Cleaner, wipe off with cloth.
4
Shake can and spray on a thin film of Developer.
5
Inspect. Defects will show as bright red lines in white Developer background.
Apply penetrant. Wipe to remove Allow short pene- Penetrant from tration period. surface. Use Cleaner, moistened towel if surface is rough.
A quick, easy way to make shop and in-field inspections of landing gear, airframe and components. Highly sensitive Spotcheck dye penetrants which give clear, bright red indications. Locates very fine cracks on the surface of ferrous and non-ferrous components, equipment and structures. Reveals cracks on materials with surface temperatures as high as 350F. Perfect for testing welds before thorough cooling. Convenient spray cans make application easy and contain no fluorocarbon propellants. Non-flammable. Materials meet applicable specifications for dye penetrant inspections (ASME, ASTM and MIL specs). Considered flammable and hazardous by UPS.
Locates all leaks in petroleum- and synthetic-based aviation fluid systems! Checks an entire system in just minutes! Ideal for use as part of a diagnostic/ preventive maintenance program for commercial and military aircraft fuel and fluid systems! Features: FAST The quickest way to inspect for leaks in aviation fuel, lubrication and hydraulic systems. SAFE Specially formulated to accommodate the host fluid. Will not damage the fluids properties or any of the systems components. VERSATILE Allows inspection of the entire system under virtually all operating conditions. Ideal for both inflight and static testing. COST EFFECTIVE Super-concentrated. Use less per dose! Glows a bright green under UV light.See our website for suggested dilution ratios. 16 oz. .............................................................P/N 13-07351 .......$176.95 8 oz. ...............................................................P/N 13-07350 .........$94.85 Optimax UV LED Flashlight Kit......................P/N 13-07347 .......$742.85 Leak Detection Kit ALK-365 ..........................P/N 13-07348 .......$795.00 Tritan Board Beam UV Lamp 365 .................P/N 13-07349 ....$1,736.00 Cobra Borescope 7400 Pixel .........................P/N 13-07352 .......$369.00 Marksman II Ultrasonic Diagnostic Tool Kit ...P/N 13-11730 .......$590.00
PLEASE VISIT OUR WEBSITE FOR ALL KIT DETAILS LISTED ABOVE.
Since 1866, Garland Manufacturing has been supplying America with top-quality products made from the finest water buffalo rawhide. Today, theyre the leader in the manufacture of soft-faced mallets and hammers of unsurpassed quality. All Garland products are manufactured in the U.S.A. to ISO 9002 international quality standards. They combine superior craftmanship with the best materials and then field-test their products extensively on a range of surface finishes to meet the requirements of the industries in which theyre used. Industries ranging from foundries and electrical manufacturing to jewelry and woodworking. Their mallets and soft-faced hammers are preferred by both craftsmen and production workers.
Garlands all-rawhide mallets are made of tough, long-wearing, water buffalo rawhide. Theyre ideal for use on broad-faced striking surfaces in a broad range of applications.
Size 0 2 4 6 Size 7 10
Head Length Weight Part (Inches) (oz.) No. 2 2 12-00749 3 6 12-00750 3-1/2 11 12-00751 4-3/4 24 12-00752 Head Length Weight Part (Inches) (oz.) No. 2-1/2 8 12-00753 3-1/2 20 12-00754
Garlands rubber mallets are designed for general-purpose applications. All sizes deliver solid, mar-free blows. Face Dia. Head Length Weight Part Size Price (Inches) (Inches) (oz.) No. 1 2-1/4 3 17 12-00755 $29.90 2 2-1/4 3-7/8 19 12-00756 $32.50 3 2-1/2 4-1/2 32 12-00757 $39.75 Nylon mallet works great for shaping metal. Head Length: 3 1/2. Face Diameter: 1 1/2. Hammer Length: 10 P/N 12-02895 ............ $8.95 The split-head hammer does the work of six different hammers because the face can be easily changed. Available in two sizes. Many materials & surfaces. Die moving or positioning. Assembly. Electric Motor Repair. Propeller Repair. Foundry. Face Dia. 1-3/4 2-3/4 Head Length Weight Part No. Price 3-1/4 2.5 lbs 12-00965 $34.25 4 5.25 lbs 12-00966 $52.25
RUBBER MALLETS
NYLON MALLET
676
For 1/8 to 1 O.D. metal tubing. Makes clean, right-angle cuts with no burrs or chips to clog tubing. Roller type with flare cut-off groove, fold-away reamer and spare cutting wheel. Wt. 6-1/2 oz. Hi-Duty Tube Cutter P/N 12-00382 ............$26.85 Replacement Cutter Wheel P/N 75015 ...................$8.75 Replacement Reamer Blade P/N 79318-01 ............$10.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Each tool bends one size. Open side type slips over tube at any point. Makes smooth short-radius bends up to 180 with minimum effort. No marking, scraping or flattening of tubing. Calibrated to show angle of bend. Wide hook grips tube securely. Suitable for bending annealed copper, aluminum, steel, stainless steel and hard copper tubing of bending temper.
Tubing O. D. 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Bender Model No. 364-FH-02 364-FH-03 364-FHA-04 364-FHA-05 364-FHA-06 364-FHA-08 364-FHA-10 364-FHA-12 Part No. 12-20002 12-20003 12-20004 12-20005 12-20006 12-20008 12-20010 12-20012 Bending Radius 3/8 7/16 9/16 11/16 15/16 1-1/2 2-1/4 3 Price $69.75 $86.95 $89.95 $115.95 $87.95 $84.95 $217.95 $326.95
Designed for use in tight quarters where other cutters wont fit. For 1/8 to 5/8 O.D. tubing. Requires only 13/16 swing radius. Perfect for instrument panels, control cabinets, machine tools, etc, Size: 111/16x 1-5/16 x 7/8. Wt. 2-1/2 oz. P/N 12-01277 ............$23.75
Exceptionally handy in close quarters - only 3-1/2 overall length. Makes clean, right-angle cuts without flattening tube. Cuts 1/8 to 3/4 O.D. tubing. Enclosed feed mechanism. Wt. 5 oz. Junior Cutter P/N 12-01576 ............$14.95 Replacement Cutter Wheel P/N 32633 ...................$7.25
Tool quickly adapts to all sizes in its range by changing forming wheel and block. Long handles re-position during bend for best leverage. Calibrations show precise bend angle. Benders for 3/8 through 3/4 O.D. tubes are as illustrated. Benders for 1/4 and 5/16 O.D. tube in #350-FHA kit are one piece type. Kits furnished in steel tool box. Model 350-FHA Kit- For 1/4,5/16,3/8,1/2,5/8& 3/4 Tube ...................................... P/N 12-20100 .$497.50 Model 360-FHA Kit- For 3/8,1/2,5/8& 3/4Tube . P/N 12-20200 .$654.95 For bending annealed copper, aluminum, brass, steel and stainless steel tubing. Multi-tube design does the work of three conventional lever type benders. Calibrated markings for making accurate left-hand, right-hand and offset bends. (for 1/8, 3/16, 1/4 O.D.) P/N 12-01577 ............................$23.85 Calibrated markings for making accurate left-handed, righthanded and offset bends. 90 start requires less effort-making bending fast and easy. For 1/4, 5/16, & 3/8 (6 & 8 mm) O.D. tubing. 15/16 radius to center of tube.(for 1/4,5/16,3/8 OD) P/N 12-01578 ............................$49.50
The mini tube cutters compact design is ideal for tight spots under sinks and behind appliances. It cuts copper, brass and aluminum tubing from 1/8 to 1 1/8. Extra cutter stores inside knob. Includes retractable deburring blade. P/N 15-07093 ..............$7.85
T-1295 Heavy Duty Segmented Flaring Tool (37) Tool Flares: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2, O.D. tubing. Forms 37 flares in annealed stainless steel (MIL-T-6845 or AMS-5566), cold drawn stainless steel, and annealed copper, brass, steel or aluminum. Bar has vice extension. Wt.: 3lbs. P/N 12-01166 ..........$744.00
WEATHERHEAD
The AN braided stainless steel hose cutter makes quick work of cutting hoses to length. It features long handles for better leverage and a rubber no-slip grip. It can cut any braided stainless steel line up to size 12 AN. .........................P/N 12-02574 ...........$53.50 This economical tool will cut soft pipe and tubing up to 1-1/4 outside diameter. The blade is tefloncoated and reverses for double the useful life of the blades. .......................P/N 12-20020 .....$14.25 ea. Replacement Blades...............................P/N 12-20025 .......$5.85 ea. Seal Plastics lightweight tubing shear only 3 overall in length, easily cuts all thermoplastic tubing and other types of non-wire reinforced hose....P/N 12-02580 ...........$10.65 Pkg of 5 blades......................P/n 12-02579 ..............$4.85 Designed to replace the original Parker beading tools. Compact design. Capable of tubing wall thickness from .035 to .065 thick
Size 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 1-3/4 2 Set of all 9 Description EZ-BEADER TP885A EZ-BEADER TP885B EZ-BEADER TP885C EZ-BEADER TP885D EZ-BEADER TP885F EZ-BEADER TP885G EZ-BEADER TP885H EZ-BEADER TP885I EZ-BEADER TP885J EZ-BEADER Tubing Beader Part No. 12-00354 12-00355 12-00356 12-00357 12-00358 12-00359 12-00360 12-00361 12-00362 12-00363 Price $25.90 $31.50 $36.75 $41.25 $58.90 $82.50 $73.85 $73.85 $72.50 $369.95
Hard chrome-finished cone makes exceptionally smooth, high strength flares with a radius at base of flare instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. For tubing sizes: 3/16, 1/4, 5/16, 3/8, 1/2 and 5/8 O.D. Wt. 1 lb. 11 oz. Not for use on Stainless Steel Tubing. P/N 12-01581 ............$73.50
Faceted, hard chrome finished cone rolls out perfect flares above die block, then automatically burnishes flare face. Slip-on yoke permits use in tight quarters. Heat treated dies grip tubing without scoring. Flares and burnishes: 3/16, 1/4, 5/16, 3/8, 1/2 and 5/8 O.D. tubing. Wt. 1-1/2 lbs. Works on some Stainless Steel Tubing but not warranted for Stainless. P/N 12-01582 ............$93.75
Operates on same principle as Imperial #507-FA but flares 1/8 (primer line) and 3/4 tubing as well. Size: 4W x 4D x 8H. Wt. 2-1/2 lbs. Excellent tool for bench - not for close-quarter work. Not for use on Stainless Steel Tubing. P/N 12-01575 ............$88.65
Forms 37 flare to AN standards in steel, stainless steel (including MIL-T 6845), titanium, an other metal tubing. Three rollers in flaring cone roll out 37 flare above die block. Extension on yoke for clamping in vise. Furnished in plastic kit. Wt. 2-1/2 lb. P/N 12-01579 ..........$298.50
677
This U.S. made 37 Double Lap Flaring Tool makes flares to AN standards in soft copper and aluminum tubing for 3/16 1/2 O.D. Also makes single 37 S.A.E. standard and oversize flares. Adapters revolve for quick size change and act as positioning gauge for tube. For portable use or can be vise mounted. Sliding handle gives maximum leverage. Wt. 4 lbs. P/N 12-00205 ....... $595.00
The 470-FH Triple Head 180 Tube Bender bends 4 diameters of tubing with just one tool! It handles soft copper, aluminum and thin-walled steel tubing in 3/16, 1/4, 5/16 & 3/8 diameters. Like the heavy duty 464-FH, it features the patented ROTO-LOK twostage handle that allows east fabrication of bends up to 180. It also features optimized bending grooves that allow the user to bend the tubing in the smallest radius possible to enable tighter turns and minimize the space taken by the bends. Soft copper - .030-.032 wall. 304 stainless steel .030-.032 wall. P/N 12-01042 ...........$34.75 The newest addition to our ATS Pro Rivet Squeezer Line is built for hard use, but we must admit its also one of the best looking squeezers weve ever seen. Its an all stainless steel design thats constructed to last a lifetime. The unique unibody styling is drop forged for extra strengh and CNC machined to tight tolerances. The yoke (also stainless steel) is engineered to be half the weight of other yokes, yet retain full strengh. Finally, the whole thing is beautifully finished in a brush satin look and highly polished surfaces. Has a very solid feel, and professional look that will complement anyones toobox. Squeezes up to 5/32 aluminum (1/8 seel) rivets. Works with any rivet sets, or diple dies having a 3/16 (.187) shank. Adjustable ram does not need shims. Lifetime warranty. Features:1.5 Yoke Drop forged from Stainless Steel for unmatched strength and durability Clasic bushed stainless steel finish. Adjustable ram does not need shims Squeezes aluminum rivets up to 5/32 and steel rivets up to 1/8 Comfort grip rubber handles 4lbs shipping weight. P/N 12-01620 ........................ $104.75
Our 37 Double Lap Flaring Tool Kit includes the double lap flaring tool above which forms 37 double lap flares to AN10078 in soft copper and aluminum tubing (wall thick- ness to .040). Flares tubing sizes 3/16, 5/16, 3/8, and 1/2 O.D. Also includes a tubing cutter, an inner-outer reamer, and a plastic carrying case. A quality tool kit which is made in the U.S.A. P/N 12-00210 ....... $595.00 Forms 37 flares aircraft grade stainless steel (MIL-T-6845), titanium, and other metal tubing, both soft and hard. Positive stop gauge assures correct size of flare. The three rollers in the flaring cone roll out 37 flares above the die block while burnishing the flare face to a smooth finish. A built in extension on the yoke can be clamped in a vise for extra support. Satin chrome and black nickel finish. Complete kit includes flaring tool and reaming yoke. P/N 12-02423 ....................$398.00 Standard Model (403)- Designed especially to economically reline brakes, this riveting set is a handy tool for many other jobs where rivets are used to fasten leather, canvas, plastic and metal parts. ...... P/N 824.............. $14.50 Brake lining Rivets... P/N 06-02300 .. $0.03ea Deluxe Model (404) - Our deluxe model brake relining tool makes it virtually impossible to botch a brake relining job. The threaded screw action of the rivet insertion tool insures a perfect roll on brake rivets every time without damaging the liner. Standard Model (Not Threaded) .............P/N 824 ....................... $14.50 Deluxe Model (Threaded)........................P/N 12-20810 .............. $19.50 Punch Non-Threaded / Brake Relining for model 403 P/N 12-01171 ................ $3.75 Punch Threaded / Brake Relining for model 403 P/N 12-02575 ................ $5.95 Anvil Punch / Brake Relining for model 404 P/N 12-01170 ................ $3.75 Brake Lining Rivet 4X6............................P/N 06-02300 ................ $0.03 BR1007 Rivet Set for Reline ...................P/N 12-01173 ................ $6.75
The Rivet Squeezer Kit is designed to take on any riveting task. It contains the new ATS Heavy Duty Rivet Squeezer, a Bench Mount Kit, plus and extra 1-1/2 yoke head to reach into tight areas. Youll also get a complete set of squeezers and dimple dies in a convenient holder. Ats Pro Lifetime warranty. 14 lbs (6.5Kg) shipping weight. P/N 12-02406 ........................ $340.95 This Professional Riveting Kit has all the tools you need to drive rivets like a pro... It contains the best-selling ATS Pro Series 3X Rivet Gun, a selection 4 of our most popular Bucking Bars (141, 142, 148, and 149), plus a complete assortment of Rivet Sets to install Universal Head (AN470) or Flush (AN426) rivets in sizes 3/32 to 3/16. And it all comes to you in a stylish molded case to keep things neatly organized. This is the prefect field kit to take with you anywhere -- it has the riveting tools you need conveniently laid out in one handy ready-to-go package. The Professional Riveting Kit is a part of our ATS-PRO Series, so you can rest assured that your tool investment will be well protected by an Unconditional 30 Day Money Back Guarantee, and industry-leading ATS Pro Lifetime Warranty. 19lbs shipping weight. P/N 12-01698 ..................... $257.95
The Parker Beading Tool has been the number one choice of aircraft mechanics for making clamping beads in metal tubes. To this day, no other tool even comes close to matching its quality. So by special arrangement, the manufacturer tooled up to recreate this classic tool in every detail. In the process they have added a few enhancements of their own, such as ground, hardened, and polished surfaces for mar-free beads in aluminum, copper, brass, and mild steel tubes ranging from 1/4 to 1 diameter. Meets MILSPEC MS33660D and SAE AS5131 standards. P/N 12-01049......... $393.00
ATSs newest compression riveting kit features a USA made unit that is completely interchangeable with Chicago Pneumatic 0214 series squeezers. The complete package includes: one 1 1/2 C Squeezer Yoke, one Longeron Yoke and a complete 17 pc. Rivet Squeezer/Dimple Die Mix. 1/8 maximum rivet capacity. Accepts all squeezer sets with .187 shank. Requires 80-90 psi at 3 cfm. 13 lbs (6Kg) shipping weight. P/N 12-03146 ........................ $599.95
678
HANDI-CLAMPS
This tool incorporates a 3/8 stroke and 5/8 ram adjustment. The full 360 yoke can be locked in any position in relation to the handles. Uses standard squeezer sets with 3/16 shank diameter. Yoke depth: 1-1/2. Model AT502AH-D..............................P/N 12-00400 .........$259.95 To develop maximum power, the riveter must drive the rivet near the end of the riveters stroke. For maximum power the combined length of the two rivet sets must be of the correct length. Determine the correct length as follows: WHEN TWO CUPPED RIVET SETS ARE USED The sum of the two rivet sets L dimension should equal the closed height dimension of the yoke minus the total thickness of the material being used. WHEN TWO FLUSH SETS ARE USED The sum of the two rivet sets L dimension should equal the closed height dimension of the yoke minus the overall length of the rivet after it is driven. WHEN ONE CUPPED SET & ONE FLUSH SET ARE USED The sum of the two rivet sets L dimension should equal the closed height dimension of the yoke minus the total thickness of the material being riveted and the height of the finished rivet head driven by the flush set. If necessary, select rivet sets a little short and shim to proper length with hardened shims listed in the table. The closed height dimension of the yoke referred to above is the opening available when jaws of plunger are in extreme closed or forward position with both rivet sets in place. Assorted Squeezer Set. 5-piece, consisting of rivet sets for 3/32,1/8 and 5/32 AN470 rivets, and one flat set. Shank dia. 3/16. P/N 26-5 .................. $18.95
CM WP ME HA AP LG EP CS
Side-Grip clamps are designed to clamp at the edge of the work area. Ideal for holding work pieces of all types, particularly during bonding, sealing or gluing operations. Plier-operated. Spring loaded. Constant clamping force. Color-coded for easy identification. Use TP74 or US902 installation tool. Made in the USA EFF. Body Clamping Body Part No. Depth Price CAP (GAP) Length (Reach) 12-01161 0-1/2 1/2 2-3/16 $1.85 12-01143 0-1/2 1 2-3/16 $2.25 12-02643 0-3/4 1 2-7/16 $2.85
Makes possible the changing of rivet sets without removal of retainer spring. For .402 shank dia. rivet sets. P/N AT-114C3 ..... $4.35/ea. Large radii at critical points to prevent breakage. Slightly crowned, highly polished face designed for rapid flush riveting where a smooth skin surface is essential. Shank dia. .401. Part No. AT-107A-1 AT-107A-3 Face Dia. 1 1-1/4 Length 2-3/4 3-3/4 Price $22.45 $24.00
Part No. 207/206-3-P 207/206-3-R 207/206-3-S 207/206-4-P Price $35.25 $33.00 $32.50 $31.85 Part No. 207/206-4-R 207/206-4-S 207/206-5-P 207/206-5-R Price $32.75 $32.25 $31.00 $33.25
When ordering, Basic Part No. Size No. - Body Letter. PN PER PUNCH 1 DIE
Cup surfaces are highly polished and guaranteed to conform with rivet heads. Carried in stock in AN470 (MS20470) universal-head cup shape. Overall length, 3-1/2, .401 dia. centerless-ground shank. AT-100A-3-3/32 ............ 3/32 ...................... $6.75 AT-100A-3-1/8 .............. 1/8 ........................ $7.80 AT-100A-3-5/32 ............ 5/32 ...................... $7.95 AT-100A-3-3/16 ............ 3/16 ...................... $8.95 Same tool as AT100A but has 10 bend 1 back from the cup to allow added clearance. Permits easier riveting where obstructions are encountered. AT-101A-3-3/32 ................... 3/32 ......................... $6.75 AT-101A-3-1/8 ..................... 1/8 ........................... $8.35 AT-101A-3-5/32 ................... 5/32 ......................... $8.35 AT-101A-3-3/16 ................... 3/16 ....................... $12.75 Designed to squeeze 1/16 - 5/32 rivets and dimple 1/16 3/16 in material up to .040 thickness. Takes standard 3/16 shank rivet squeezer sets. With adjustable ram and 2-piece C-yoke of heat treated stainless steel. Throat depth: 1.5. Gap: 1-1/4. Overall length: 14. Best quality squeezer on the market. P/N 12-00300........... $131.95
IN EL
AV TO PS BV
679
COUNTERSINK CUTTERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No. AT484-2 AT484-12 AT484-21 AT484-31 AT484-32 Head Dia. D #40 #30 #21 #11 #10 This kit provides countersinking versatility with nine different 1/2 diameter cutters, six of the most commonly used foot pieces, and a high-speed bearing-constructed microstop. The microstop controls cutting depth in .001 increments, from 0 to 5/16. Cutters-ground on-centers to ensure concentricity-are 100, with pilot diameters #40, #30, #21, 3/32, 1/8, 3/16, and 1/4. P/N 12-00824.....................$228.50
AT 409 SERIES STRAIGHT SHANK COUNTERSINK WITH INTERCHANGEABLE CUTTERS AND PILOTS
Designed for operating in angle drills with 1/428 threads and in the AT441SLS Micro Stop Countersink. Has 1/4-28 threaded shank. Cutter angle 100. AT455D-4 has 7/16 dia. cutter head. Use with AT484 pilots. P/N AT455D-4 ....$13.85
AT484 replaceable pilots have a .086 dia. shank with a flat to accommodate the set screw of the AT455 cutter. An undercut permits the head to seat on the cutter angle. Order by P/N ........$10.50 ea. Part No. AT484-56 AT484-57 AT484-59 AT484-61 AT484-63 Head Dia. D 3/32 1/8 5/32 3/16 7/32
AT484 PILOTS
Assembly, consists of AT418E (1/2) cutter, AT416 pilot and AT409-1, 1/4 straight-shank. Has a collet-type shaft to securely hold the replaceable pilot. When ordering specify: Part number of cutter and pilot dia. Assembly Example: AT409 with 100 cutter A418E & 1/8 pilot. (AT416-57) ............ Adapter only............P/N AT409-1 ...........$11.25
Three-straight flute replaceable pilot cutters with female thread. These cutters are designed with extra deep flute to permit numerous resharpenings and radial clearance to assure fast smooth cutting. For Replaceable Pilots Refer to AT416 Series. Used With AT418
AT441 HS Micro Stop Countersink, similar to the AT442SLS unit, except with 1/428 female threaded nose to accommodate AT455 cutter. P/N 12-01591.......................$26.85
A precision tool for production countersinking. Ball thrust bearing for absolute depth control. Adjusts in .001 increments, with positive adjustment lock. Skirt accepts cutters up to 5/8 dia. Has 1/4-28 male threaded shaft for use with AT418 cutters. Can be assembled and disassembled without special tools. Split shaft and taper locks pilot in place when cutter is tightened. Order cutters and pilots separately. P/N AT442-SLS ...................$96.75
Same type cutter as described above except with 120 Cutter Angle. 7/16 Cutter Diameter. P/N AT418D-7 .....................$34.75
Fit AT418 cutters. Undercut permits head to seat on cutter angle. Order by Part No. in table below. Order by part Number. .......... $8.50 Ea. Part No. AT416-2 AT416-12 AT416-21 AT416-31 AT416-32 Head Dia. D #40 #30 #21 #11 #10 Part No. AT416-56 AT416-57 AT416-59 AT416-61 AT416-63 AT416-65 Head Dia. D 3/32 1/8 5/32 3/16 7/32 1/4
2 Models available-one with NEEDLE bearing and one with BRONZE bushings. .001 increment depth adjustment. Positive adjustment lock. 1/4 dia. shank. 9/32 shaft travel. 9/16 cutter capacity. For 1/4-28 threaded cutters. Comes with NO-MAR foot piece. Rated at 3,000 RPM. Made in USA. With Bronze Bushings P/N 12-01412 ...........$36.25 With Needle Bearings P/N 12-00940 ...........$36.75
COUNTERSINK SETS
Countersinks made of high-speed steel, 3-fluted and 14 - 28 threaded. Set includes #40, #30, #21, #10, and 1/4.
Countersink 82 degree 5 pc. set ............. P/N 12-02883 ..............$42.95 Countersink 120 degree 5 pc. set ........... P/N 12-02884 ..............$42.95
Use these sets with your hand squeezer. Will set brake rivets eliminating the possibility of cracking your brake pads. P/N 12-00550 ....................$39.90
This panel dimpling tool is used for dimpling thin sheet metal panels to accept the 2700 Series C-Spec Fasteners. It can also be used to dimple panels to accept FJ4 Series Flush-Head Z-Spec Fasteners. This tool is made from premium tool steel and is bright Zinc plated. ........................... P/N 12-02855 ..............$23.65
Die Grinder Arbor (Mandrel). Holds your cutoff wheels. It has a 1/4 shank for use in most drills and die grinders. Can accomadate either 1/4 or 3/8 cutoff wheel through hole sizes. P/N 12-02924 ......................$4.95
680
HAND SEAMER
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Wide, deep jaws machined for smooth parallel fit Forms precise folds and seams 1 deep x 3-1/2 wide throat P/N 44R ...................$21.75
Handy crimping tool to disperse excess metal. Depth of throat 1-1/8. Overall length 9. Wt. 1 lb. P/N 111 ...................$79.95
Designed for fast, accurate 32 notch in sheet metal. Hook design of jaws permits notching to exact desired depth without slippage. Springreturn jaws. Capacity 20 ga. Wt. 1 lb. P/N 141 ......................... $86.75
ROPER-WHITNEY NOTCHER
COMBINATION PUNCH & DIMPLING DIE SETS For #5 Jr. punch. Punch and dimple in one
operation. 3/32, 1/8 or 5/32 100 punch & dimpling die sets. 1/8 ......................#12-02500 ................$71.65 3/32 ....................#12-02600 ................$79.25 5/32 ....................#12-02700 ................$61.25
These aircraft-type fluting pliers are a dropforged quality tool. Non-marring working surfaces of jaws specifically designed for use on aircraft components. Comfort grip handles. P/N 12-00500 ..........$15.75
FLUTING PLIERS
A real time saver for flanging lightening holes. Non-marring. Easy to use. Nylon rollers and ball bearings assure long life. P/N 12-00600............$18.65
For bending and forming. Makes clean, smooth bends and forms up to 90 in metals. 18 & 30 handle up to 16GA aluminum. 40 handles is up to 20GA sheet metal, 18GA aluminum. All include brake bars. Clamps not included. Made in USA. Up to 18 width stock ................... P/N 12-02800 ................$39.75 Up to 30 width stock ................... P/N 12-02810 ................$99.50
Designed to bend solid round, square and flat alloys into nearly any shape and angle. FEATURES: Works on solid materials up to 3/8 diameter. Coils and bends wires of many sizes. Includes dies for 1/2, 3/4, 1, 1 1/4 & 1-1/2 diameter bends. Constructed of 3 x 3 aluminum base 1 thick with a 12 handle 7/8 in diameter. Made in the USA. 1 year Replacement Warranty. P/N 12-00934 ..........$31.75 Constructed of 4 x 6 aluminum base 1 thick with a 16 handle 7/8 diameter. Bends solid round, square and flat iron. FEATURES: Works on solid materials of up to 3/8 round and square (1/2 wide flat). Coils and bends wire of many sizes. Bends metal to any shape and degree of angle. Include dies for 3/8, 3/4, 2, 3 & 4 diameter bends. Installs on any vise. Ideal for hobbyists, prototype shops and do-ityourselfers. Made in the USA. P/N 12-00935 ..........$54.75
This small, compact brake is excellent for all tough fabrication and repair jobs. The radiused dies make it possible to form those difficult materials such as 2024T3, 4130, and stainless without fear of cracks. Features solid steel bar construction, heavy duty clevis hinges, and portable bench mounting. Includes 2 sets of assorted width reversible dies with 1/16, 1/18, and 3/16 radii, plus complete instructions. Ideal for machine shops, aircraft, race car, boat builders, avionics installers, & auto repair shops. P/N 12-02850 ......$1,398.80
For many homebuilders, the production of high quality aircraft metalwork can be a daunting prospect. There can be hundreds of intricate fittings to produce and many will require accurate bending. Magnum Bender has a BIG capacity and is capable of bending 1/8 thick x 6 wide 4130N. Magnum bender uses sets of interchangeable bending bars each with two different radii to produce high quality bends, up to, and including 90 degrees. Bending bars are hardeneded and polished and allow for material spring back. The Magnum Bender is available as a metric version, with 3 bending bars offering 1,2,3,4,5 and 6mm radii. Each machine is supplied with two pairs of operating levers, 1 ft. long and 2 ft. long. Metric .........................P/N 12-01551 .......$1,065.00
MAGNUM BENDER
The Porto-Metal Former makes the specialty angle needed in minutes. Can be used on the work bench or in a vise to make inside angles, outside angles, straight bends - even circles, to a radius as small as 3. Jaws are made of hardened alloy steel. Works 18 gauge soft steel, 20 gauge stainless, 16 gauge aluminum BACK up to 2 in width. 45 to 1 leverFRONT age for powerful press. Special malleable iron body will not break as we have found with cheaper imitations. Order #LSH-71 metal shrinker for inside angles. Order #LST-82 stretcher for outside angles. Wt. 12 lbs. each. #LSH-71 Shrinker......................................P/N 12-19800 .......$172.95 #LST-82 Stretcher .....................................P/N 12-19900 .......$174.65 Combination Shrinker/Stretcher Tool ........P/N 12-02950 .......$239.95 Either unit can be converted into its opposite by ordering complete conversion kit, includes jaws, blocks & wire.
681
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Specifically for the installation of all CherryLOCK Rivets. Recommended primarily for 1/4 diameter CherryLOCK rivets. It can be used to install all diameters and lengths as indicated on the tool capacity charts. Low recoil, low noise and a comfortable fit in the operators hand. It can be operated in any posi-tion with one hand. The H681 Series pulling heads fit directly on this tool to install both bulbed and standard NAS type 2000 Series CherryLOCK Rivets. With the proper adapters and pulling heads, this tool can install other types of rivets. P/N 12-02983 .............$10,995.00 For high speed, reliable installation of the most popular sizes of aircraft Lockbolts. Incorporates a bayonet attachment for quick change of pulling heads. This tool can also be used to install blind bolts and blind rivets. A comfortable grip for one handed operation in any position. Compatible with Huck 352 & 230 riveter pulling heads. P/N 12-03011 ...............$1,692.00
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G800. P/N 12-03006 ..................$143.25
Installs: 5/32, 3/16 & 1/4 NAS Style. LockBolt Includes: G84 LockBolt Power Riveter - Stroke: 9/16, Pulling Force: 5, 750 lbs (2,608 kgs), Weight: 7.7 lbs (3.5 kgs). H513-08-35 Pulling Head. H513S-05-20 Pulling Head Cherry 5/32 D LockBolt. H513S-06-20 Pulling Head MaxiBolt 3/16 LockBolt. P1395 Molded Carrying Case. 269C5 Grip Gauge LockBolt. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. All Necessary Manuals. P/N 12-03013 ...............$4,400.00
The G800 is an ergonomic, lightweight hand powered riveter capable of installing a wide variety of blind fasteners. The all metal design makes this compact and robust tool ideal for use in rugged shop environments or field repair. Exceptional power with low hand effort for increased productivity. Mounting system (same as G704B) compatible with popular pulling heads including H782, H781-456& H753A-456. Leak-proof design with advanced seals & built-in redundancies. Ergo design with internal shock absorber & cushioned handle. Adjustable lever easily accommodates different hand sizes. Stroke: 3/4". Pulling Force: Up to 6000 lbs. Weight: 1.7 lbs (0.8 kgs). P/N 12-03004 .................$674.00
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G84. P/N 12-03012 ..................$135.60
G800CRM CherryMAX Hydraulic Hand Riveter Kit Includes: G800 CherryMAX Hydraulic Hand Riveter - Stroke 3/4, Pulling Force up to 6000 lbs, Weight 1.7 lbs. H781-456 Pulling Heads. H753A-456 Pulling Heads. 269C5 Grip Selector Gauge. 269B12 Grip Selector Gauge. Molded Plastic Case. All Necessary Manuals (except -6 all aluminum) P/N 12-03005 ..............$2,642.00
Installs: 5/32 & 3/16 MS Blind Bolt & LockBOLT, 1/8, 5/32 & 3/16 Cherry MAX Includes: G83 Lightweight LockBolt Hand Riveter - Stroke: 7/16, Pulling Force: 3, 750 lbs (1, 701 kgs), Weight: 4.95 lbs (2.3 kgs). H513S-05-20 Pulling Head Cherry 5/32 D LockBolt. H513S-06-20 Pulling Head 3/16 LockBolt. H701B-456 Pulling Head Straight 3/4 x 1 3/4. H753A-4562 CherryMAX Pulling Heads RT Angle 2 1/4 x 5 7/16 x 3/8. H781-456 Cherry Pulling Head Offet 1/8-5/32-3/16. H83B-5MB Pulling Head MaxiBolt 5/32D. H83B-6MB Pulling Head MaxiBolt 3/16 D G83/G84. P1393 Plastic Box. 269B12 Maxibolt Gauge. 269C3 CherryMAX Grip Gauge. 269C5 Grip Gauge LockBolt. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. 744-300 Adapter. All Necessary Manuals P/N 12-03008 ...............$5,075.00
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G784. P/N 12-03002 ..................$333.10 The G702A is a pneumatic-hydraulic tool designed specifically for installation of nut plate rivets. Its durable, all metal housing makes this tool ideal for use in rugged shop environments. The H702-3NPR pulling head fits directly on the tool to install -3, -4, 2.5 mm & 3mm nut plate rivets. 10 angled head allows user to work using a natural hand position. A comfortable grip for one handed operation in any position. Air Pressure: 90 PSI (6.2 bar) min./110 PSI (7.6 bar) max. Cycle Time: approximately one second. Noise Level: 71 dB (A). Vibration: less than 2.5 m/s2. Air Consumption: .09 SCF / cycle (2.55 L / cycle). Stroke: 3/4. Pulling Force: 1,100 lbs (499 kgs). Weight: 3.5 lbs. P/N 12-02985 ...............$1,286.00
Installs: 5/32 & 3/16 MS Blind Bolt & NAS Style LockBolt Includes: G83 Lightweight LockBolt Hand Riveter - Stroke: 7/16, Pulling Force: 3, 750 lbs (1, 701 kgs), Weight: 4.95 lbs (2.3 kgs). H513S-05-20 Pulling Head Cherry 5/32 D LockBolt. H513S-06-20 Pulling Head 3/16 LockBolt. H83B5MB Pulling Head MaxiBolt 5/32D. H83B-6MB Pulling Head MaxiBolt 3/16 D G83/G84. P1393 Plastic Box. 269B12 Maxibolt Gauge. 269C5 Grip Gauge LockBolt. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. All Necessary Manuals. P/N 12-03009 ...............$5,187.50
Includes: G784 Cherry Universal Power Riveter 12 High, 8 lbs., 15/16 Stroke. P1395 Molded Carrying Case. TLC852 CherryLock Selector Card. TLC864 CherryLock Process Manual. 269C3 CherryMAX Grip Gauge. 700A77 Bleeder Bottle. Note: No Pulling Heads Included. P/N 12-03001 ...............$4,338.00
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G83. P/N 12-03010 ..................$203.05
Installation of CherryLOCK rivets. Will install nearly all diameters of CherryLOCK rivets up to a half-inch grip, A group only. With proper adapters & pulling heads this tool can be used to install other types of rivets. A comfortable grip for one handed operation in any position. Pulling heads not included with riveter. Air Pressure: 90 PSI (6.2 bar) min./110 PSI (7.6 bar) max. Noise Level: 69.7 dB (A). Vibration: less than 2.5 m/s2. Air Consumption: .27 SCF / cycle (7.65 L / cycle). Stroke: 7/8. Pulling Force: 2,600 lbs (1, 179 kgs). Weight: 8 lbs (3.6 kgs) P/N 12-02998 ...............$3,057.00
Designed for high speed, reliable installation of the most popular sizes of aircraft Lockbolts. By bending the rubber pin deflector sideways, 1-1/2 additional clearance can be obtained. This tool can also be used to install blind bolts and blind rivets. A comfortable grip for one handed operation in any position. Compatible with Huck 352 & 230 riveter pulling heads. Stroke: 7/16. Pulling Force: 3, 750 lbs (1, 701 kgs). Weight: 4.95 lbs (2.3 kgs). P/N 12-03007 ...............$1,383.00
Installation of CherryMAX and nut plate rivets. This tool utilizes straight, offset and right angle pulling heads, all of which can install -4, -5 and -6 diameter CherryMAX bulb type rivets in all head styles, materials and grip lengths. Extensions are available for extending the pulling heads to reach limited access areas. 10 angled head allows user to work using a natural hand position. A comfortable grip for one handed operation in any position. Same weight as the G702A, with the power of much larger tools. P/N 12-02995 ..................$845.00
682
CM WP
Used for flush trimming Cherry rivets. P/N 12-02977 ....................$29.95
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G747. P/N 12-02996 ..................$178.80
ME HA
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G746A. P/N 12-02994 ..................$219.00
Cherry Grip Gauge Lockbolt. Material thickness & grip. P/N 12-02979 ....................$19.00
AP LG
All the seals, O-rings, gaskets and hardware required for routine maintenance of your Cherry blind riveters. A must for any in-house repair facility. For Tool G704B. P/N 12-02990 ..................$185.30
EP
SPLIT POWER RIVETER G704B-40SH
Designed specifically for the installation of CherryMAX rivets in applications with extremely limited access. The tool transmits power from the power unit through a flexible hose to a small, lightweight head. By utilizing the proper pulling head, design problems and operator fatigue can be greatly reduced. Equipped with an 8 foot hose. Pulling heads not included with riveter. Hose Length: 10 (305 cm). Stroke: .518. Pulling Force: 3136 lbs (1423 kgs). Weight: 4.5 lbs (2.0 kgs) (power unit only) P/N 12-02987 ...............$2,085.00
Installs: NAS 9301 to 9312 (1/8 to 3/16). MS90353/4. MS21140/1. TAF S TYPE (1/8 & 5/32). MS20604/5 (3/32). Includes: G747 Cherry Lightweight - Installs CherryMAX Rivets. H701B-456 Pulling Head Straight 3/4 x 1-3/4. H747-3NPR Pulling Head. H753A-456 CherryMAX Pulling Heads RT Angle 2-1/4X5-7/16X3/8. H781-456 Cherry Pulling Head Offet 1/8-5/32-3/16. P1393 Plastic Box. 269C3 CherryMAX Grip Gauge. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. All Necessary Manuals. P/N 12-02997 ..............$2,469.00
CS IN EL AV TO
Installs: -4, -5, -6 CherryMAX. Includes: G746A Power Riveter Cherry 1/8,5/32,3/16 A Rivets. H701B456 Pulling Head Straight 3/4 x 1-3/4. H753A-456 CherryMAX Pulling Heads RT Angle 2-1/4X5-7/16X3/8. H781-456 Cherry Pulling Head Offet 1/8-5/32-3/16. P1393 Plastic Box. 269C3 CherryMAX Grip Gauge. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. All Necessary Manuals. P/N 12-02992 ...............$3,368.00
Designed specifically for the installation of CherryMAX rivets in applications with extremely limited access. The tool transmits power from the power unit through a flexible hose to a small, lightweight head. By utilizing the proper pulling head, design problems and operator fatigue can be greatly reduced. Equipped with an 8 foot hose. Pulling heads not included with riveter. Hose Length: 3 (91.5 cm). Stroke: .518. Pulling Force: 3136 lbs (1423 kgs). Weight: 4.5 lbs (power unit only). P/N 12-02989 ...............$1,659.00
Installs: SST & -3, -4, -5, -6. CherryLock A. Includes: G746A Power Riveter Cherry 1/8,5/32,3/16 A Rivets. H955-3 Pulling Head. H955-4 Pulling Head H9555 Pulling Head. H955-6 Pulling Head. P1393 Plastic Box. 269C3 CherryMAX Grip Gauge. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. All Necessary Manuals. P/N 12-02993 ...............$3,397.00
Installs -4, -5, -6 CherryMax. Includes: 6704B Power Riverter - Cap = 1/8-3/16 Wt. = 4 1/2 lbs. H701B-456 Pulling Head Straight 3/4 x 1-3/4. H753A-456 CherryMAX Pulling Heads RT Angle 2-1/4X5-7/16X3/8. H781-456 Cherry Pulling Head Offet 1/8-5/32-3/16. P1393 Plastic Box. TLC816 CherryMAX Process Manual. TLC865 CherryMAX Selector Guard. 269C3 CherryMAX Grip Gauge. 670A20 Stem Catcher Bag. 700A77 Bleeder Bottle. P/N 12-02988 ..............$3,285.00
Pulling head is integral part of tool. Great in areas with limited access or power limitations. The G30 is an efficient, compact and lightweight tool for installing Cherry LOCK A rivets. Overall length: 9 1/4 (23.5cm). Weight 0.8 lbs.. P/N 12-02982 ..................$232.95
PS BV
683
Maxibolt Pulling Head. Straight head style. Maxibolt Diameters: 5/32, 3/16. P/N 12-03109 ..................$648.00
Cherry MS Straight Pulling Heads - H9040 Series. H9040-4C ........................................... P/N 12-03127 ...............$1,036.60 H9040-5C ........................................... P/N 12-03128 ...............$1,036.60 H9040-6C ........................................... P/N 12-03129 ...............$1,036.60 H9044-8C ........................................... P/N 12-03130 ...............$1,036.60
Pulling heads to install U type Maxibolts. Will fit G83 or G84-LS (w/744-700 adaptor). 12-03099 ..................$446.25 12-03102 ..................$446.25 12-03108 ..................$572.90 12-03111 ..................$782.35
Maxibolt Pulling Head. Offset head style. Maxibolt Diameters: 3/16. P/N 12-03112 ...............$1,387.35
These pulling heads fit directly onto Cherry G902 and G746A Power Riveters. Cherry P/N Rivet Dia. Inches Part No. Price H902-3NPR -3 (3/32) 12-03125 $309.95 H902-4NPR -4 (1/8) 12-03126 $382.65
This pulling head aids installation of MAXIBOLTs in limited access applications. For use with G744 tool. For use with Cherry shift washer type only. Use 744-200 adapter for G83/G84. Head style Rivet Dia. Inches Part No. Price Right Angle 5/32" 12-03094 $1,981.60 Right Angle 3/16" 12-03095 $1,981.60 Right Angle 1/4" 12-03097 $2,210.50
Flush style pulling heads will install both universal and countersunk rivets. These pulling heads fit directly onto Cherry G902-15 riveters. H9015-3C ........................................... P/N 12-03121 ..................$536.15 H9015-4C ........................................... P/N 04-01515 ..................$540.00 H9015-5C ........................................... P/N 12-03123 ..................$533.30 H9015-6C ........................................... P/N 12-03124 ..................$533.30
This pulling head installs 1/8, 5/32 & 3/16 Nominal & Oversize CherryMAX Rivets (G744 only). P/N 12-03103 ..................$422.10
The H955 Series pulling heads fit directly on the G701A, G704B, G746A and G747 riveters. The heads in this series are capable of installing 3/32, 1/8, 5/32 and 3/16 diameter rivets in all materials and head styles and grip lengths. Stems feed through the pulling head and are ejected out the back of the tool. H955-3: 3/32 ..................................... P/N 12-03136 ..................$396.95 H955-4: 1/8 ....................................... P/N 12-03137 ..................$422.10 H955-5: 5/32 ..................................... P/N 12-03138 ..................$422.10 H955-6: 3/16 ..................................... P/N 12-03139 ..................$442.10
CherryMAX Right Angle Pulling Head installs 1/4 Nominal & Oversize CherryMAX Rivets (G744 only). P/N 12-03096 ...............$1,881.00
The Cherry brand H782 is a new universal, off-set pulling head capable of installing a broad variety of pull-type fasteners. Its strength, light weight and compact dimensions make it ideal for a diverse range of applications including restricted spaces. The H782 is capable of installing CherryMAX rivets, CherryLOCK A code rivets, MaxiBolt S type blind bolts, MBC rivets, SPR rivets, NAS1398 A & AB code products, MS90353/4, MS21140/1, 4, 5, NAS1719, 1720 & 1721 and pull-through type nut plate rivets. Note: Uses CherryMAX mounting system (G704B, G746A, G747). P/N 12-03091 ..................$612.00
CherryMAX Offset Pulling Head installs 1/4 Nominal & Oversize CherryMAX Rivets (G744 only). P/N 12-03093 ...............$1,401.05
For use with G83 & G84 tools. For use with Cherry shift washer type only. H83B-5MB ......................................... P/N 12-03098 ..................$446.25 H83B-6MB .......................................... P/N 12-03101 ..................$446.25 H84A-8MB ......................................... P/N 12-03107 ..................$527.50 H84C-8MB .......................................... P/N 12-03110 ..................$583.05
The H886 series right angle s fit directly on the G701A, G704B, G746A and G747 power riveters to install CherryLOCK A brand rivets in 3/32, 1/8, 5/32 and 3/16 diameters in all materials, head styles and up to -04 grip length. 12-03113 ...............$1,021.20 12-03114 ...............$1,021.20 12-03115 ...............$1,021.20 12-03116 ...............$1,021.20
684
RIVET GUNS
The Cherry G-28 is a lightweight (13 oz.) ruggedly compact hand tool designed to efficiently set a broad range of Cherry commercial rivets. A unique torsion spring keeps the lever arm in place, ready to accept rivet after rivet. The G-28 comes with two popular size nosepieces, 728A9-4 (to set Cherry N Rivets - 1/8 dia. & Cherry Q Rivets - 1/8 dia.) and 728A9-6 (to set Cherry N Rivets - 5/32 & 3/16 dia. & Cherry Q Rivets - 5/32 & 3/16 dia.), one of which is stored securely out of the way in the riveter handle. P/N 12-03000 ..............$115.95 The Cherry G-29 Hand Riveter is an efficient, compact, lightweight tool for installing Cherry NUT-PLATE rivets. It comes equipped with a 728A9-3 nosepiece to install 3/32 rivets and has a 728A9-104 nosepiece stored in the handle for installing 1/8 rivets. The G-29 Riveter is 9-1/4 long, weighs just 13 ounces and is intended for use when access or power limitations prevent the use of Cherry power tools. P/N 12-00701 ..............$114.95 The Cherry G-27 Hand Riveter is designed specifically for the most efficient installation of 1/8 CherryMAX Rivets. The G-27 Riveter is intended for use where access or power limitation prevents the use where access or power limitation prevents the use of Cherry pneumatic power tools. Overall length of the G-27 is 9-1/4, the net weight is just 13 ounces and the pulling head is an integral part of the tool. P/N 12-03105 ................$89.75 This rivet kit includes 200 assorted Klik-Fast rivets in popular sizes. The molded plastic case houses and protects the tool and rivets. Weight 4 lbs. P/N 12-03100 ................$97.85 This unique tool for 1/8 120 countersunk Pop rivets attaches to the Cherry G-28 standard hand Pop rivet gun. Simple design makes dimpling foolproof, quick and easy, with no cracking of metal. For use on aluminum to .040 thickness. P/N 17014 ............ $10.75 For uniform spacing of rivets, bolts, nails, etc. Unique fan design expands to 36. Equally spaces up to 20 holes between 2 given points. Made of 301 stainless steel. P/N 12-11700 ............... $38.75 10 Hole spacer P/N 12-00184 ............... $24.75 Allows operators to set up to 14 rivets per minute - twice as many as can be set by standard hand tools. The RiveDrill is ergonomically friendly, requiring just 6.6 lbs. of pressure to operate, compared to 77.2 lbs. required for hand tool operation. Excellent for working on aircraft, autos, or boats. The RiveDrill can be quickly inserted into a 3/8 reversible power drill as any standard drill bit would and is able to set any standard blind rivet up to 3/16 aluminum. The shank of the rivet is expelled when the drill is operated in the reverse mode. (For cordless electric power drills, a minimum 12V battery is recommended.) Nosepieces for 1/8, 5/32, & 3/16 sizes are included. P/N 12-00253 ...............$69.50 Ergonomic, lightweight design. Only one hand required to locate, drill & countersink both holes. Easily convert rivet spacings with interchangeable foot attachments. Available in single wing, double wing & mickey mouse models. Accomodates all nutplate spindle spacings from 0.219 to 1.125. Fully adjustable feed rate. 600 or 7,000 RPM P/N 12-01376 ......$3,624.00 Rotates 360 and rivets in any position. High leverage handles for added power. Hardened steel construction for long life. Extended nose for hard to reach places. Will pull 3/32, 1/8, 5/32, and 3/16 rivets. Model TP844............................ P/N 12-00365.............$56.85 Its design enables the rivet nuts to be seated tighter than with conventional tools. This fastening tool has unique uses! The rivet nut possesses far greater load bearing capability than a regular sheet metal screw! Proudly made in U.S.A. Use it instead of a sheet metal screw. For use with aluminum or steel rivet nuts.Kit includes Rivet Nut Tool, Stabilizing Rod, and Qty 1 each of 6-32, 8-32 and 10-32 rivet nuts. P/N 12-00968 .....................$19.65
So controllable you can easily buck rivets as small as 3/32 to as large as 3/16. P/N 12-18340 ........ $129.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
3/32, 1/8, 5/32 and 3/16 rivets. 3-1/2 (5 pcs. straight, includes flat) P/N 12-18341 .......... $28.95 3-1/2 (4 pcs. offset) P/N 12-18342 .......... $27.90 5-1/2 (4 pcs. straight) P/N 12-18344 .......... $29.90 Professional Hand Plier Rivet Tool is 50% easier to use then other hand tools. A patented compound link designed does the work for you. A shorter grip opening ergonomically designed for one hand operation. Grips cover the length of the lever and body, and soft handles are contoured to fit the hand. The wrench and nosepieces (3/32, 1/8, 5/32, & 3/16) are stored in the handle of the tool. Excellent for use on Cherry and other standard pop rivets. Features: Robust aluminum casting and vanadium steel handle design Setting capacity: aluminum rivets up to 3/16 (4.8 / 5.0mm) body diameter Contoured handle grips for comfort Rivet retaining handle design for one-handed riveting Supplied with nosepieces for 3/32, 1/8, 5/32 & 3/16 (2.4mm, 3.2mm, 4.0mm & 4.8mm) rivets Supplied nosepiece wrench Length: 9.65 (245mm) Weight: 1.3 lbs. (0.6 kg) P/N 12-00178 ...........$28.85 Includes four nosepieces to set rivet diameters from 3/32 up to 3/16. Convenient lock chain keeps handles closed when tool is not in use. Made in U.S. P/N 12-18352 ...........$38.95 3M Riveters Tape 685 Transparent Film with Green Adhesive, 1.7 mils (.043 mm) Polyester film with a rubber-strip coated along edges of tape only and tackfree center Window P/N 12-18355 ..................... $9.65 Ideally suited to the needs of the aircraft homebuilder. Develops 3,500 lbs. of pulling force which permits the installation of all Cherry Commercial Blind Rivets or any other Pop type rivets through 1/4 diameter as well as all CherryMax rivets through 3/16 diameter. Will not pull Cherry Lock rivets. Quickly converts to a threaded blind nut setter. The kit includes the D100 hydraulic tool with adapters for blind rivet and blind nut installation, rivet nosepieces for 1/8, 5/32 and 3/16 diameter blind rivets, blind nut pull-up studs with nosepieces for 6-32, 8-32, 10-32 and 1/4-28 Rivnuts, operating instructions and a rugged Plastic storage case. Size: 12-1/2 x 8-1/4 x 3. Weight: 3 lbs. P/N D100-RN Kit .....................$352.95 No larger than a compact drill motor, will install virtually any straight-pull blind rivet with installation loads of 3500 lbs. or less. All blind rivets from 3/32 dia. up to and including 1/4 dia. Can install CherryMax rivets. It utilizes a patented two-valve hydraulic pump actuated by 90 to 130 PSIG air pressure. Collect/jaw assembly remains stationary while the outer sleeve-nosepiece assembly is hydraulically moved, creating sufficient load to install the rivet. Furnished with three nosepieces for 1/4, 1/8, 3/16 & 3/32 rivets. Wt. 29 oz. P/N 09-01070 .........$558.95
RIVET KIT
3M RIVETERS TAPE
RIVEDRILL
Includes: 1pc Rivet Gun (choose size 2X, 3X or 4X), 1pc Type A -Bucking Bar, 1pc Type B -Bucking Bar, 1pc Brass Regulator, 1pc Air Tool Fitting, 4pcs 3.5 Straight Rivet Set (3/32, 1/8 5/32, 3/16), 1pc Standard Flush Set (Surface: 1, Length: 2.5), 1pc Beehive Spring, 1pc Retainer Spring, 1pc Marvel Air Tool Oil (Made in USA)
Gun 2X 3X 4X Length 6-11/16 7-5/16 8-1/2 BPM 2580 2160 1740 Cap. 1/8 3/16 1/4 Bore 1/2 1/2 1/2 Shank .401 .401 .401 Stroke 2-1/4 2-7/8 3-1/16 Weight Part No. 3. lbs 12-02682 3.2 lbs. 12-02686 3.4 lbs. 12-02687 Price $197.00 $197.00 $197.00
This 25 ft. air vacuum hose snaps back to a compact 20 coil for easy storage. Includes non-corrosive brass male fittings. Excellent for air tools using a compressor. 100 PSI working pressure. Oil resistant polyurethane construction High visibility color. 1/4 NPT air inlet P/N 12-00218 .....................$10.75
685
LUFKIN NO. W921OME Has 1/2 blade, 3 meters long (equal to about 10 ft.). Markings are on one side only, with millimeters on upper edge and inches to 16ths on lower edge. White face. P/N 12-19700 ..........$11.75
This 12-ft. steel tape measure with 1/2 blade is graduated in tenths & hundredths of inches and also in fractions of inches (32nds). Very handy for all aircraft construction. A must for building composite aircraft. P/N 33-272 ..............$17.90
L722 Wrench Type Riv-Nut installation tool for the larger size fasteners 5/16 up to 1/2, tool comes with long arm allen wrench with plastic handle for easy installation.
L722 wrench type header 5/16-18 3/8-16 1/2-13 M10 Part No. 12-00920 12-00922 12-00927 12-00930 Price $52.75 $49.75 $82.25 $79.50 L722 wrench type header 5/16-24 3/8-24 1/2-20 Part No. 12-00921 12-00926 12-00928 Price $49.75 $49.50 $82.50
Smart Tool is a unique digital inclinometer with up to 0.1 of repeatable accuracy. Place Smart Tool anywhere and it provides an accurate digital readout of angular reading instantly with no interpretation or guesswork needed. It measures and displays any angle through 360, and readings can be relative to any angle. Smart level even calculates complicated slope measurements in either percent or inches per foot. It is sunlight viewable, features 3 sensitivity settings, and has 120-hour battery life with auto shutoff. Smart Tool is ideal for fixture work, tube bending, metal forming, body work, drive shaft angles, camber, caster, and A-arm angles, and a wide variety of other applications in the aircraft and race car building industries. Also ideal for coordinating and aligning flight control surfaces. Compact & rugged, Smart Tool is powered by any 9V battery. Smart Tool in 24 rail ......................P/N 12-21365 .........$163.95 Smart Tool in 48 rail ......................P/N 12-21370 .........$175.95 MODEL 200M (2-3/4 Dia. Dial) - Very versatile tool ideal plumb bob. Magnetic base and center hang hole. Body of high impact ABS plastic. Dial protected by acrylic cover. Angle and rise chart on back. P/N 12-14800 ...........$23.85 Very popular with aircraft builders, mechanics and woodworkers. Used for flight control surface rigging, setting propeller angle, and aircraft leveling and more. Features: Full 360-degree measuring range with maximum resolution and accuracy of 0.1 degree. Simple 30 second calibration procedure using only the top flat edge of a table or desk. Alternate zero button to set zero starting point at any angle (commonly used for aileron, flap and elevator rigging). Display hold button to freeze reading when measuring in tight spaces. Readout stays upright even when protractor is upside down. Dimensions: 7.5 x 5 x 3. Total weight: 16 oz. P/N 12-02651 ...........$98.95 The Pro 360 Digital Protractor is a revolutionary measuring tool that provides an immediate, digital reading of all angles in a 360 circle.The machined aluminum frame is a rigid, light weight, ultraprecise platform that allows the state-of-the-art sensor and its microprocessor circuit to provide unsurpassed accuracy throughout the Protractors 360 range. Typical used by aircraft builders, maintenance personnel and airport operators. P/N 12-20125 ....$224.95
Kit includes: TP726A, TP726B, TP726C, TP726N, and handy case. Perfect for field repair and experimental use Easy to use - inserts from one side of the work in seconds Excellent for close quarters, overall height less mandrel 1-1/2 Uses 3/4 open end or socket wrench TP726N Notcher manually operated Made in the U.S.A. Model TP726A / 6-32 TP726B / 8-32 TP726C / 10-32 TP726N/Notcher TP726K / Kit Part No. 12-00348 12-00349 12-00350 12-00351 12-00352 Price $47.65 $42.50 $42.50 $21.75 $133.50
The L-1000 economy hand rivnut tool is recommended for slotted rivet nut fasteners. Adequate for aluminum, brass, steel and stainless steel fasteners. Made in U.S.A. Order by part number. L-1000M is same tool, except in metric sizes.
Model L-1000 L-1000 L-1000 L-1000 L-1000M Thread Size (60-32) (8-32) (10-32) (1/4-28) (M6) Part No. 12-13645 12-13650 12-13655 12-13660 12-13675 Price Ea. $45.75 $45.75 $45.75 $45.75 $49.75
The PRO-3600 is accurate to 0.01 and has an RS-232 compatible serial port for a computer interface and SPC records keeping. P/N 12-00759 .........$355.95
This high quality, durable rivet cutter features all steel construction and cuts 1/16 to 1/4 diameter rivets. It is adjustable for 1/4 to 3/4 long rivets. P/N 12-16840 ...........$42.50
This handy rivet cutter, w/ 2 hardened blades, cuts rivets of any standard dia. from 3/32 to 3/16 without burring. The length of the cut rivet can be varied from 3/16 to 5/8 by means of 8 adjustable leaves attached to the cutting head. Plastic coated grips. Wt. 2 lbs. P/N 12-00200 ...........$36.85 Cuts 5 different diameter rivets, as well as wire and screws to 7 different lengths. Made of hardened and ground steel, this rivet cutter can be easily fastened to a workbench or held in a vise. Accepts rivet diameters 1/16, 3/32, 1/8, 5/32, 3/16, Will cut to lengths: 5/32, 7/32, 9/32, 11/32, 15/32, 17/32. P/N 12-00262 .............. $133.95
RIVET CUTTER
The Riv-Nut Puller was designed for installation of steel and aluminum rivet-nuts. High speed, push-pull action. Available in sizes 6/32, 8/32, and 10/32. Rivnut Puller 6/32 ........................................... P/N 12-02886 ........$95.95 Rivnut Puller 8/32 ........................................... P/N 12-02887 ........$95.95 Rivnut Puller 10/32 ......................................... P/N 12-02888 ........$95.95 Rivnut Puller Conversion Kit 8/32 ................... P/N 12-02880 ........$36.50 Rivnut Puller Conversion Kit 10/32 ................. P/N 12-02881 ........$36.50 Rivnut Puller 6/32 w/ 2 Conversion KitS ......... P/N 12-02885 ......$148.50 Rivnut Stem Replacement 6/32 ...................... P/N 12-02889 ........$22.95 Rivnut Stem Replacement 8/32 ...................... P/N 12-02890 ........$22.95 Rivnut Stem Replacement 10/32 .................... P/N 12-02891 ........$22.95 Rivnut Puller Conversion Kit 8/32 ................... P/N 12-02880 ........$36.50 Rivnut Puller Conversion Kit 10/32 ................. P/N 12-02881 ........$36.50 Rivnut Puller 6/32 w/ 2 Conversion Kit ........... P/N 12-02885 ......$148.50
RIV-NUT PULLERS
686
Aircraft structures are sensitive to tool damage during manufacture, servicing and repair but the numerous plastic and composite materials available in our products are able to deliver the levels of strength and durability required of tools systems whilst conforming to aircraft manufacturer specifications. Strong ribbed backing air chisels that are easily reshaped. Designed to fit standard air chisel tools with a 0.401 diameter shank, this scraper system maintains the damage reduction and non-marring properties of our hand tools but is suited to heavy-duty and higher volume material removal while reducing operator fatigue.
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MASTER INSTALLER KIT - Soft, yet strong, all Bojo tools are made tough enough to scrape, but not hard enough to damage. Set of 7. P/N 12-00976 .......$19.95
Multi Wedge non-marring tool sets allow homebuilders and avionics installers to remove panels, dash trim bezels, and other interior moldings, including door panels, without causing damage. Excellent for use in aviation, auto restoration, body work, electronics installation, upholstery etc. The Orange Set (3400) P/N 12-01671 is made of a softer polyethylene plastic blend for prying dash bezels, trims, and moldings without damaging the vehicles interior. The Black Set (3500) P/N 12-01672 is made of a more expensive high impact polycarbonate plastic for prying harder materials such as thin walled aluminum engine covers and sheet metal panels. Product Benefits: Thin tip to fit into tiny gaps Wide surface area to displace force, therefore reducing damage Flexible Slick surface for ease of prying Built-in handle Non-marring surface Slim powerful angle Curved tip for easy prying Thing tip for tight gaps Multi Wedge Set Orange (Soft) 3400 ............ P/N 12-01671 ........$10.85 Multi Wedge Set Black (Hard) 3500 .............. P/N 12-01672 ........$11.75 Both Multi Wedge Sets - Orange (Soft) / Black (Hard) 3400/3500 P/N 12-01673 ........$18.50 This Muli-purpose scraper has a 2 1/4" wide blade ideal for more coverage. This scraper is ideal for lighter duty jobs. It has a blade cover for safety and a hole in the handle to hang for convenience. This scraper is disposable and does not have replacement blades available. P/N 12-02371 ......................$6.50
Use this pneumatic pistol grip sealant gun to apply smooth, uniform material exactly where you want it. Comes with body, 10 ft. hose, and 2 1/2 oz. zinc-plated corrosion resistant retainer. Hanson-style air fitting on hose. Gun with 2.5 oz. Retainer .............................. P/N 12-02921 ......$124.95 Gun with 6 oz. Retainer ................................. P/N 12-02920 ......$124.95
Sealant cutter quickly and safely removes thick applications of seam sealant for aircraft maintenance and repair. Eliminates the need for harsh chemicals. Saves time and effort. 1/4 x 28 Threaded Shank. .40 Diameter ................................................. P/N 12-02879 ..........$6.35 .83 Diameter ................................................. P/N 12-02878 ..........$6.50
SEALANT CUTTERS
MULTI-PURPOSE SCRAPER
These tools are full machined and/or laModel 1 ser cut, which helps them retain a sharp edge. The tools are used by many deModel 2 fense contractors and Naval air stations for sealant application, sealant removal, paint removal, acrylic canopy contact, Model 3 and general use. They are made from cell cast acrylic or black nylon as noteed. These tools can be resharpened on an abrasive belt or disc. Note: 15% Model 4 Discount on 12 or more (Per P/N)
Material Acrylic Nylon Acrylic Acrylic Part No. 12-02360 12-02361 12-02362 12-02363 Price $1.65 $5.50 $2.10 $2.80
687
TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Recoil System is the simple way to repair stripped or damaged threads. It provides stronger and more efficient threads which have great holding power. The system is quick and easy to use and is ideal for alloys and other light materials. The recoil insert, which is larger in diameter than the tapped hole, is compressed during installation then allowed to spring back, permanently anchoring into place. The Recoil System consists of Recoil stainless steel helically wound precision inserts, high quality HSS taps and installation tools.
Kit P/N 34600* 34040* 34050* 33050** 34060* 34070RC* 34080* 35060*** 35080*** 33004** 34004* Size 3/16 - 10-32 1/4 - 28 5/16 - 24 5/16 - 18 (UNC) 3/8 - 24 7/16 - 20 1/2 - 20 M6x1 (Metric) M8x1.25 (Metric) UNC Range Kit UNF Range Kit Inserts Per Kit 10 10 10 10 10 5 5 10 10 50 50 Price $42.50 $64.50 $50.00 $64.50 $49.85 $81.95 $98.95 $61.50 $67.50 $308.00 $328.95
RECOIL KITS
5 Way all purpose wire 9" long made of hardened steel matte black permanent finish with bright clear markings. Makes it an attractive & easy to use product. Features long comfortable plastic grip handles. A one piece tool that shapes & cuts wire 5 different ways. Specifications: Standard wire cutter crimps insulated terminals 22-14 12-10, Shears 5 bolt sizes 4-40 6-32 8-32 10-24 10-32, Crimps non-insulated terminals 10-12 14-16 1822, Strips wire 10-22 awg P/N 11-08077 ..........................$13.95
This 12 point, full ratchet crimping tool terminates precision BNC connectors in size RG 55,58,59,62,141,142,223,303 and 400. This crimper is built to MS22520 specifications and die set is included with the crimper. Specifications: Cable Groups: RG 55/58/59/62/141/142/223/303/400 P/N 12-02378 ........................$130.95
*UNF - Unified Fine Thread **UNC = United Coarse Thread *** Metric = Metric & Spark Plug (ISO) For use on flush skin butt joints. This tool quickly and easily finds the cut line on the overlap of new metal. The lower leg slides under the new metal and hooks on the adjacent skin and the upper leg scribes the new skin as it pulled along. This tool is adjustable to suite the desired gap at the skin joint. This tool is especially handy when the old skin that is removed is damaged beyond usefulness as a pattern Note: For use on aluminum only.P/N 12-00746 ...... $33.75 The Screwstick is a pocket screwdriver which accepts any common 1/4 tip. An extra tip is stored in the stainless steel shaft, and a heavy duty magnet holds tips firmly in place. A steel torque driver for stubAborn applications is stored in the shaft. A rubber finger grip for holding plus a heavy duty pocket clip are included. Ideal for aviation, automotive, & many other applications. Great for mechanics. P/N 12-20105.............$4.50
High carbon, heat-treated steel crimping tool that has a unique design that provides a high strength/ weight ratio that crimps a broad range of 22-10 AWG terminals and connectors. P/N 12-01146 ...........$57.50
The AT508K features serrated jaws for improved gripping and a slip joint for improved leverage. Ideal for all common cannon connector applications. P/N AT508K ........$22.85
3/32" Ballpoint Hex Socket Driver for use on hex head screws and nuts. *This tool is commonly used with most avionics units like Honeywell Bendix/King and Garmin. P/N 12-02063 .................. $4.65
These versatile Master Key Chucks are available in two sizes (small & large) which open sizes 1/4 to 3/4. These tools allow you to open over 1200 different key chucks. Save wear on chucks by always having the proper key size available. The squared center of the keys opens acetylene tanks. Made of treated steel with black oxide finish. Small ............................. P/N 12-30165............. $15.25 Large............................. P/N 12-30170............. $16.75 All Sharp is an innovative diamond sharpener that provides 4 different grit sizes on the same tool. All Sharp sharpens and fine sharpens tools and bits and cleans burrs on hard to reach parts and equipment. Its tough stainless body will not rust and All Sharp fits in any tool tray or pouch. Model ST-7 .......................P/N 12-21430. .........$17.50
MASTER CHUCK
Ever been on your back looking up at a bunch of white wires or in a really tight space where only your arms and shoulders would fit and wonder, how am I going to tell the difference between all of these wires? this wire marking tool will allow you to do just that. The wire marking tool works on wire from 24 ga to 8 ga. This tool is perfect for every mechanic and do it yourselfer. Mark just one wire or all of your wires before you start or while installing in just seconds. 4 and 12 pack of markers sold separately. Wire Marking Tool ........................................P/N 12-02497 ..........$32.75 4 pack colors: Black, Blue, Red, Green ........P/N 12-02501 ............$9.50 12 pack colors: Black, Blue, Green, Red, Orange, Yellow, Purple, Brown, Turquoise, Lime, Berry, & Aqua. ..................P/N 12-02503 ..........$21.50
Generals Cordless Power Precision Screwdriver is ideal for ultra-delicate applications such as computer and electronics repair, hobbies and crafts. The 100+ RPM motor features forward and reverse controls, and the quick-change chuck allows for effortless swapping between 1/8 Slotted, Phillips and Torx bits. Features: Cordless Precision Screwdriver (2 AAA alkaline batteries included) 10+ hours of power 100+ RPM motor with forward and reverse controls Super-torque drive Quickchange chuck Ergonomic design allows for various comfortable grips Precision bit assortment (1/8 drive) Phillips: #00, #0 Slotted: 1/16, 1/8 Torx: T5, T6 P/N 12-02308 ..........................$29.96
The Tork-It Model 36 precision torque screwdriver is a micro-setting device that is adjustable from 2 to 36-lbs. in 0.5 -lb. increments. The tool complies with ANSI type 3 class A style 1screwdriver grip torque wrench standards. Tork-It is supplied with a 1/4 pin-lock hex bit holder. 6-piece Hex-BIt set of 1.5mm, 2mm, 2.5mm, 12-14335 3mm, 3/32 & 7/64 can be ordered separately. Tork-It Screwdriver ... P/N 12-14330 ...... $158.75 Six Piece Hex Bit Set ........................... P/N 12-14335 ........ $15.80
This heavy duty screw extractor is designed with a .401 shank to fit most standard rivet guns and is held in place by a retainer spring. The square tip will accommodate 3/8 socket tool bit holders with inserts for removing hex, square, Phillips, or standard screws. Manufactured from high grade shock resistant tool steel. P/N 12-01632 ...............................$8.90 Useful in removing screws that are corroded or have stripped heads .401 Parker taper shank for use in rivet gun 3/8 square drive with wrench. Use standard Phillips or Slotted insert bits Rivet gun required P/N 12-00827 ........... $36.75
Industrial rated bits for extra long life Heat treated 1/4 & 5/16 nut drivers Interchangeable bits fit both Philips & Slotted screws Bits: 3/16 Slotted; 9/32 Slotted; #1 Philips, #2 Philips. P/N 12-14000 .............$7.85
688
LATHES MILLS
This is the machine you dont have to baby. The Micro Lathe is a rugged, precision instrument. Its machined, ground and stabilized steel bed has a lifetime ball bearing spindle, coupled with a 6-speed positive v-belt drive. Spindle speeds in geometric progression from 525 to 5200rpm provide the power to HOG 1/8-inch cuts in mild steel or the speed and accuracy to dust a few tenths. Other big lathe features include large .001 graduations on the cross slide dial, an allangle tool post and a carriage depth stop. Adjustable gibs provide full compensation for carriage and cross slide wear. 2-yr. factory warranty. 15 bed. Comes factory assembled. The Unit pictured is a basic unit (P/N 12-00171) with an optional 3-Jaw Chuck, Boring bar(1097E), Tailstock (1150), Drill Chuck (1091), 1/4 HP 1725 RPM Motor (1021w), Motor Mount Bracket (1022), Mounting Board (1023), and Pulleys (1162 with 3M 500 belt). All accessories are sold separately and are not included in the base price. Note: Photo shows Lathe with all accessories which are not included (Available separately). P/N 12-00171 is basic lathe unit only. P/N 12-00171 ..................$179.50
General Specifications: Overall working accuracy: 0.0005 Max. bearing run out: 0.0004 Headstock normality to bed: .0004 in max error Max. taper bed dovetail over pins: 0.0001 All machine dovetails: 45 Bed width: 2 5/16 Cross slide dial graduation: 0.001 Cross slide screw: 1/4-20 adjustment for back-lash take-up provided (jam nut arrangement) Carriage travel: 0.600 1 rev. of hand wheel Max. spindle speed recommend: 7000 rpm Motor requirement: 1/8 1/4 HP Pulley type: Std. 5/8 bore, multistep V-belt Length of headstock on ways: 2.875 Length of carriage on ways: 3.000 Width of cross slide on carriage: 2.000 Tool post: may be adjusted for angle cutting (chamfer, boring, etc.) Capacity: Swing over bed: 4.5 (max. turning dia.) Swing over cross slide: 2 3/8 Overall length of bed: 15.5 Overall length of lathe: 16.5 Tool bit size: 1/4 Drill chuck capacity: 0 to 1/2 Distance between centers: 9.75 Carriage travel: 9 Cross slide travel: 1.75 Spindle Specifications: Sealed precision ball: 1.5748 O.D. 0.6692 I.D. Spindle nose: 3/4 16 (3/4 SAE) Spindle hole: 0.343 Spindle ID taper: 15 (30 included) Max. collet diameter: 9/32 Pulley size: 5/8 bore
MICRO LATHE
The AT429SXC Micro Miller features a .75 horsepower 20,000 RPM Sioux Tools motor. Cutter capacity is 3/4 and the unit will cut steel, aluminum and stainless steel. Spindle size is 1/4-28 and inlet pipe tap is 1/4 NPT. Air requirements: 90 PSI. Tease trigger allows slow start up & exhaust porting is through the bottom of the handle. P/N AT429SXC ...... $465.95 Cutter Size -1 -2 -3 -4 -5 -6 -7 Cutter Dia. 5/16 3/8 7/16 1/2 9/16 5/8 3/4 Skirt Part No. AT429A-1 AT429A-2 AT429A-3 AT429A-4 AT429A-5 AT429A-6 AT429A-7 Skirt Price $24.25 $25.50 $24.25 $24.25 $24.25 $24.50 $24.50 Cutter Part No. AT429B-1 AT429B-2 AT429B-3 AT429B-4 AT429B-5 AT429B-6 AT429B-7 Cutter Price $20.75 $20.75 $20.75 $21.75 $22.75 $22.25 $27.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Plywood Planer-Scarffer attachment enables you to make consistent scarf cuts quickly and easily. Easy installation and removal allows your planer to be readily used for scarffing as well as a regular planer. The Planer-Scarffer attachment is easily installed on the Makitan 1900B, Makitan 1911B and the Porter Cable 9125 planers. The attachment is not limited to these particular models or makes. With the Planer-Scarffer attachment, you can purchase standard size sheets of plywood and then join them together. This saves the extra cost of larger sheets and the shipping charges that would be required. By scarffing 4x8 sheets together, save 60% or more in the price of the plywood and make the cost more bearable. The attachment is mounted on a power-planer and cuts an 8:1 bevel. 2 models are available. One fits a 4-3/8 planer for plywood up to 1/2. The other is designed for a 3-1/4 planer and can be used on plywood up to 3/8. Specify planer type when ordering. 3-1/4 for Porter/Cable 9125 ........P/N 12-20110-1900 .............. $129.00 4-3/8 for Makita 1912B................P/N 12-02414 ....................... $164.95 3-1/4 for Makita N1900B .............P/N 12-20111-1911 .............. $129.00
Accessories 3-jaw chuck Boring bar Tailstock Drill chuck 1/4 1725 RPM Motor Motor mount bracket Mounting board Pulleys 20 L Pulleys 12-1/2 L
Part No. 12-01602 12-01603 12-01604 12-01605 12-01606 12-01607 12-01608 12-01609 12-01710
Price $57.85 $4.80 $35.95 $9.50 $144.95 $4.75 $6.95 $23.25 $23.95
The Micro Mill has effortless, chatterless table and mill head movement. This is due to the unique design of our oversized gibs, ground steel ways, massive carriage, steel bed and vertical mill head support which makes the Micro Mill ready for CNC upgrade if you desire. Our small mill is really a scaled down big mill with manual operation. Other big mill features include large 0.001 graduations on friction adjustable micrometer dials for X, Y, and Z controls. Adjustable gibs provide full compensation for X, Y, and Z mill-ways wear. It all adds up to the best value in small mills. 15.5 table, power switch & cord included. Comes factory assembled. 2-yr. warranty. P/N 12-00170 ........$739.00 General Specifications:
Manual CNC Height: 21-3/8 26-3/8 Width: 17 22 Depth: 16.75 21 Weight: 65 lbs. 85 lbs. Max. bearing run out: 0.0004 Dovetails, X-axis: 45; Y-axis: 90 Capacity: Working Axis Travel: X=9.5, Y=5.5, Z=6.0 Maximum Z-Distance to Table: 9.0 Z-Axis Swivel: 90 Column Rotation: up to 180 Spindle Head Rotation: 90 6 Spindle Speeds: 525 to 5200 RPM Z-axis: Steel box-ways Pulley type: Std. 5/8 bore, multistep V-belt Construction: steel, hard anodized aluminum on all moving components adjustable brass gibs and precision ground steel-ways. Spindle Specifications: Maximum Spindle Speed: 7000 RPM Sealed Precision Ball Bearing: O.D.=1.5748, I.D.=0.6692 Spindle Nose: 3/4 -16 (3/4 SAE) Spindle Hole: 0.343 Spindle ID taper: 15 (30 included) Max. Collet Diameter: 9/32 Pulley size: 5/8 bore
MICRO MILL
Simple and easy to construct using a sanding drum and other readily available items. Allows you to make neat and efficient scarf joints with all types of plywood, varying in thickness from a 1/4 inch down to .4 mm with a professional finish that all woodworkers like to achieve. Safe to use, easy to handle and portable. A fun gadget to use for the amateur or experienced woodworker alike. In The Box: Now includes: Dust removal attachment, 30 inch by 20 inch blueprint and instructions. ............P/N 12-02819 ......................... $15.00
Build this magnificent wood tool chest from our detailed professional plan. Its the kind of chest a craftsman dreams of. Features 10 drawers in the sturdy base, 12 more drawers plus a large top bin in the removable upper section. Overall size is 25W x 10-5/16L x 27H. Ideal for the aircraft builder or aircraft mechanic. Plans only for Wood Tool Chest. P/N 12-18350 ............................$24.95
Machinists and woodworkers show your skill. Impress potential customers when they come into your shop, and see such a nice cabinet like this. This cabinet has removable trays for easy access to all hand tools. This cabinet when built by my plans, will have room for all your hand tools. As a bonus it has wheels on it for easy mobility. Size of this unit when completed 32W x 19D x 68H P/N 12-00978 ........................... $16.95
689
Initially designed for the RV3, RV4 and RV6 builders, this kit has proven to be very popular with virtually all aircraft home builders. It contains our most popular rivet hammer and is an excellent tool kit for RV builders. Weight: 40 lbs. P/N 12-01145 ......................$695.00
Part No. 02-R18C-12 02-R18C-28 02-306-21 02-306-30 02-306-40 02-441 04-M-1/8 04-M-3/32 04-1120 04-17 02-22022 Pcs. 3 3 1 1 1 1 175 325 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Jobber's Length Drill Integral Pilot Cutter Countersink Cage 'M'Type Fastener Fluting Plier Rivet Cutter Multi-Burr w/5 Blades Cleco Plier Rivet Set, 3-1/2" O.A.L. Flush Set, 3-1/2" O.A.L. Offset Rivet Set, 3-1/2" O.A.L. Part No. 07-20-500 07-91 08-112 08-638 08-647 08-670 09-RH-2 10-420-2A 17-3XSP 26-200-4703 26-200-4704 26-200-4705 26-210 4263PDSB 4264PDSB 62-54404 JSM-705 TP44 Pcs. 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 Description Offset Flush Set, 3-1/2" O.A.L. Mushroom Rivet Set Bucking Bar Handi Retainer Spring Hand Rivet Squeezer, 2" Yoke USATCO Rivet Gun Cupped Squeezer Set Flush Squeezer Set Spring Back Punch &Die Plastic Kit Box 3/8" Reversible Air Drill Hand Seamer
04-62 07-10-4703 07-10-4704 07-10-4705 07-10-4706 07-10-500 07-20-4703 07-20-4704 07-20-4705 07-20-4706
WHEELING MACHINE
(BENCH MODEL)
Clearly, this is the most popular of in-home English Wheels. Metal Ace offers extensive anvil configurations to meet your needs. Plus, with the new gusseted frame, its the strongest benchtop wheel on the market. Trick out your custom-built bike or complete hobby projects without breaking the bank. These English wheeling machines provide outstanding performance on small jobs like motorcycle tanks, tank covers, seat cowls and aircraft fillets. Versatile use - mount on bench, clamp in vise or use with optional welded stand. Proudly made in the USA. Features: Thickness capacity for steel is 18 gage;16 gauge with optional stiffener brace. Features can be rolled into the center of a 44 panel. Can be mounted to a bench, clamped in a vice or used with the optional welded floor stand. Optional wheels and stand sold separately. Anvil yoke is adjustable on both sides of the axle support with thumb screws so the anvil wheel can be trued with the upper wheel. Specifications: 3.25 radius lower anvil 8 upper wheel 22 throat depth Reinforced frame 18 gauge mild steel capacity .080 AL capacity Made in the USA. Wheeling Machine MA 22B ................................P/N 12-00571 . $658.00
ACCESSORIES
Radius Wheel 5 22B-5.00 .................................P/N 12-02026 ....$92.00 Radius Wheel 5 22B-5.00 Narrow ....................P/N 12-02027 ... $96.70 Radius Narrow Offset Wheel 5 22B-5.00NO......P/N 12-02028 ... $92.00 Radius Wheel 5 Set of 3 22B-5.00SET ............P/N 12-02029 ..$278.50 Optional Stand for Wheeling Machine MA22B-STAND P/N 12-00575 ..$202.95
WHEELING MACHINE
(U-WELD MODEL)
This English Wheel U-Weld Kit supplies the components to make your own English wheel, minus the steel tubing. A detailed assembly booklet is provided and the complete kit includes all the key components of the turn-key MetalAce 44F English Wheel. Other kits on the market come with smaller 2 wide x 2 1/2 diameter anvil wheels, smaller diameter upper wheels, and require more assembly. The screwlift quick release cam unit is fully assembled. Components proudly made in the USA. Features: Set of 6 lower anvil wheels, 3 wide x 3 diameter Upper wheel, 3 wide x 8 diameter Upper wheel yoke assembly with axle and spanner Anvil yoke assembly Screwlift quick release cam assembly Set of 4 caster wheels Assembly instruction manual Made in the USA. Specifications: 8 x 3 upper wheel 2.50 R, 3.75 R, 6.00 R, 12.00 R, 24.00 R and Flat lower anvil wheels. MA44F-KIT - Components and bill of materials to build a 44F English Wheel. P/N 12-00570 .................... $1,582.00 MA44F - Fully assembled English Wheeling Machine P/N 12-02294 .................... $2,516.00
690
TOOL KITS
The Master Kit Builders Kit (TP176MKB) contains all the tools supplied in the RV tool kit plus many more. It is designed to supply all the major, most commonly used tools for the building sheet metal aircraft. These items can be used on RVs, Zenair, Questair and Mustang Aeronautic Kits as well as many, many others. A huge savings can be realized by purchasing this kit over the individual tool price. Wt. 50 lbs. P/N 12-00832 ........ $874.00
Part No. 02-R10C-1/4 02-R18C-12 02-R18C-30 02-R18C-40 02-306-21 02-306-30 02-306-40 02-441 04-M-1/8 04-M-3/32 04-1120 04-17 02-22022 04-63 07-10-4703 07-10-4704 07-10-4705 07-10-4706 07-170 07-20-4703 07-20-4704 07-20-4705 07-20-4706 07-20-500 07-90 Pcs. Description 1 2 Jobbers Length Drill 4 6 1 1 Integral Pilot Cutter 1 1 Countersink Cage 175 M Type Fastener 325 1 Fluting Plier 1 Rivet Cutter 1 Multi-Burr w/5 Blades Cleco Plier w/Comfort 1 Grips 1 1 Rivet Set, 3-1/2 O.A.L. 1 1 Flush Mushroom Set 1 w/Guard 1 1 Offset Rivet Set, 3-1/2 O.A.L. 1 1 1 Offset Flush Set, 3-1/2 O.A.L. 1 Mushroom Rivet Set Part No. 08-112 08-638 08-647 08-670 09-RH-2 10-37001 10-420-2A 17-3XSP 18-DS-1/4 18-DS-10 18-DS-30 18-DS-40 26-200-4703 26-200-4704 26-200-4705 26-210 4263PDSB 4264PDSB 53-120 53-70453 61-13551 62-54405 JSM-705 TP44 Pcs. Description 1 1 Bucking Bar 1 1 1 Handi Retainer Spring POP Swivel Hand 1 Riveter Hand Rivet Squeezer, 1 2 Yoke 1 USATCO Rivet Gun 1 1 Drill Stop 1 1 1 1 Cupped Squeezer Set 1 2 Flush Squeezer Set 1 Spring Back Punch ! Die 1 1 POP Dimple Tool 3 Piece Aviation 1 Snip Set 1 Hole Cutter 1 Plastic Kit Box 1 3/8 Reversible Air Drill 1 Hand Seamer
This kit meets most school requirements for basic sheet metal tools. These high quality tools will take the student through school and into the profession for years of outstanding service. It contains the most popular rivet hammer and is a great starter kit. Wt. 14 lbs. P/N 12-01127 ........ $359.00
Part No. Pcs. 0210A-3/32 3 0210A-1/8 3 0210A-5/32 3 0210A-3/16 3 0210A-1/4 3 02-306-21 1 02-306-30 1 02-306-40 1 04-M-1/8 10 04-M-3/16 10 04-M-3/32 10 04-M-5/32 10 02-441 1 04-501 1 04-62 1 08-670 1 Description Jobbers Length Drill Part No. Pcs. Description 09H-2 1 Handi Retainer Spring 09B-2 1 Beehive Retainer Spring 09-140 1 Power Regulator 17-3 1 Rivet Gun 07-10-4703 1 07-10-4704 1 Rivet Set, 3-1/2 O.A.L. 07-10-4705 1 07-10-4706 1 07-170 1 Mushroom Set w/ Guard 18-D -10 1 18-D -21 1 Drill Stop 18-D -30 1 18-D -40 1 62-297 1 Canvas Tool Bag JSM-705 1 3/8 Reversible Air Drill
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
M Type Fastener Countersink Cage Rivet Cutter Cleco Plier Bucking Bar
This kit is designed for all new Glastar kit aircraft. The tools included are recommended by the manufacturer, specifically for the assembly of the sheet metal portion of the kit. Many of these tools are of top quality, and designed to last. They are all covered by a 30 day unconditional money back guarantee. P/N 12-00831 ........ $924.00
Part No. 02-2962-21 02-2962-30 02-2962-40 02-306-21 02-306-30 02-306-40 02-306-30-120 02-441 02-501-12-40 02-501-6-30 02-501-6-40 02-C1-H 02-R10B-1/16 02-R10B-1/4 02-R10B-11/64 04-200 04-20SL 04-20SR 04-22022 04-3090-1/2 04-62 04-EL-1/2-1/2 04-EL-3/4-1/2 04-K380 Pcs. 1 1 1 1 1 1 1 1 3 3 3 1 3 3 3 1 1 Description HREADED SHANK DRILL PILOT CUTTERS COUNTERSINK PILOT COUNTERSINK 120 COUNTERSINK CAGE 12 AIRCRAFT EXTENSION DRILL 6 AIRCRAFT EXTENSION DRILL DRILL SETS 60 (NUMBER SIZES) JOBBERS LENGTH DRILL Part No. 04-M-1/8 04-M-3/16 04-M-3/32 04-K380 04-M-1/8 04-M-3/16 04-M-3/32 07-10-4703 07-10-4704 07-10-4706 07-170 08-638 08-647 08-721 08-760B-1 09-140 10-37001 1245 17-3XSP 20-127-4S 53-211-4263 53-211-4264 53-420-2A 53-RBH-2 61-860 62-54405 CP-785 Pcs. Description 150 M TYPE SHEET 25 METAL FASTENER 250 1 DEBURRING TOOL 150 M TYPE SHEET 25 METAL FASTENER 250 1 RIVET SET, 3-1/2 1 O.A.L. 1 MUSHROOM RIVET 1 SET 1 1 BUCKING BAR 1 1 1 1 1 1 1 2 2 6 2 1 1 1 POWER REGULATOR 360 POP RIVETER 12 FLEX RULER RIVET GUN 90 ANGLE DRILL ATTACHMENT RIVET SQUEEZER PUNCH & DIE SET HAND SQUEEZER KIT BEEHIVE & HANDI RETAINER SPRING CENTER PUNCH & SCRIBE KIT BOX-PLASTIC & METAL AIR DRILL,REVERSABLE 3/8 CHUCK
This 121-piece complete Aircraft mechanics Kit is excellent for aircraft restoration, repair and manufacturing. It is ideal for the A & P mechanic, student and homebuilder. Kit comes with everything from sheet metal tools to riveting tools in a two-drawer tool chest. This kit includes the top quality riveting hammer manufactured in the U.S.A. Wt. 48 lbs. P/N 12-01126 .........$764.00
Part No. 02-2962-21 02-2962-30 02-2962-40 02-306-21 02-306-30 02-306-40 02-441 02-1120 04-200 04-5S 04-501 04-6 04-62 04-EL-1/2-1 04-EL-1/2-1/2 04-M-1/8 04-M-3/16 04-M-3/32 04-M-5/32 04-WNX-1/8 04-WNX-3/16 04-WNX-3/32 04-WNX-5/32 07-10-4703 07-10-4704 07-10-4705 07-10-4706 07-10-500 07-170 07-20-4703 3-1/2 O.A.L. 07-20-4704 07-20-4705 Pcs. Description 1 Threaded Shank 1 Adapter Drill 1 1 1 Integral Pilot Cutter 1 1 Countersink Cage 1 Fluting Plier 1 Chip Chaser 1 Hand Metal Punch Kit 1 Heavy-Duty Rivet Cutter 1 Nibbling Hand Tool 1 Cleco Plier 3 Side Grip Fastener 2 10 10 MType Fastener 10 10 5 5 Wing Nut Fastener 5 5 1 1 Rivet Set, 3-1/2 O.A.L. 1 1 1 Flush Rivet Set Flush Mushroom Set 1 w/ Guard 1 Offet Rivet Set, 1 Offset Rivet Set, 3-1/2 1 O.A.L. Part No. 07-20-4706 07-20-500 08-112 08-638 08-647 08-670 10-420-2A 149-1 15-1580 17-3XSP 18-DS-10 18-DS-21 18-DS-30 18-DS-40 20-127-4S 20-M3 26-200-4703 26-200-4704 26-200-4705 26-210 46-231-1 46-231-2 46-231-3 46-231-5 53-70453 Snip Set 62-54405 75HP575 JSM-705 TP44 Pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Offset Flush Set Bucking Bar Hand Rivet Squeezer, 2 Yoke Wrench (for Cone Jaw Chuck) Junior Air Vac Rivet Gun Drill Stop 90Angle Drill Attachment Cone Jaw Chuck Cupped Squeezer Set Flush Squeezer Set Strap Duplicator 3 Piece Aviation Plastic Kit Box Sheet Metal handbook 3/8 Reversible Air Drill Hand Seamer
CHIP CHASER OFFSET SNIPS LEFT HANDED OFFSET SNIPS 1 RIGHT HANDED MULTI/BURR-5 5 1 BLADES INCLUDED SPRING TENSION 2 CLAMPS A-1/2 D-3-1/2 CLECO PLIER FOR 1 SHEET METAL FASTNERS 10 SIDE GRIP FASTENER CAPACITY-0-1/2 10 REACH 1 DEBURR TOOL W/ 1 3/4 BLADE
This kit is designed especially for the assembly of the Mustang Kit aircraft. It is comprised of over 300 items, specifically required in the fabrication and assembly of this aircraft. This 317 piece kit includes:
1 1 1 1 1 SM10-4705 Rivet Set 1 A1007-234X QC Retainer Spring 1 TP346 Heavy Duty Rivet Cutter 1 TP61K Stop Countersink Kit 1 TP722 Fluting Pliers 130 TP75-1/8 Cleco Fasteners 25 TP75L-1/8 Cleco Fasteners 80 TP75-3/32 Cleco Fasteners 1 TP74 Cleco Pliers 1 TP44 Hand Seamer 1 TP227G Duckbill Pliers 1 TP266 Deburring Tool 1 TP888-3 Hand Rivet Squeezer 1 TP116A Squeezer Sets 1 TP751 Bucking Bar 1 TP670 Bucking Bar 1 SM181 Swivel Flush Rivet Set TP83(3x) or TP84(4x) Rivet Gun TP91 Flush Rivet Set SM10-4703 Rivet Set SM10-4704 Rivet Set 5 TP641HC Handi-Clamp 25 TP75L-3/32 3/32 Cleco Fasteners 1 TP81 Hand Nibbler 4 TP49-30 Drill Bits 4 TP49-3/32 Drill Bits 4 TP49-40 Drill Bits 4 TP49-1/8 Drill Bits 2 TP49-12 Drill Bits 2 TP49-3/16 Drill Bits 1 TPA5611 Unibit Drill 1 TP294HD Auto Center Punch 1 TP735K Hand Pack Trial Kit 1 TPFS6 Flat File 1 TP4263 Dimple and Die Set 1 TP4264 Dimple and Die Set 1 TP216 Tool Box
MUSTANG KIT
Virtually all the tools you need for riveting in kit form. Intended for professional sheet metal mechanics, serious home builder/students. Packed in a sturdy molded plastic case. #1 selling kit.
Description 3/32 Rivet Set, 3-1/2 O.A.L. 1/8 Rivet Set, 3-1/2 O.A.L. 5/32 Rivet Set, 3-1/2 O.A.L. 3/16 Rivet Set, 3-1/2 O.A.L. 1/8 Rivet Set, 5-1/2 O.A.L. 5/32 Rivet Set, 5-1/2 O.A.L. 3/16 Rivet Set, 5-1/2 O.A.L. Flat Rivet Set Offset Flush Mushroom Set Flush Mushroom Rivet Set w/ 07-170 Guard 07-20-4703 3/32 Offset Rivet Set, 3-1/2 O.A.L. 07-20-4704 1/8 Offset Rivet Set, 3-1/2 O.A.L. Part No. 07-10-4703 07-10-4704 07-10-4705 07-10-4706 07-11-4704 07-11-4705 07-11-4706 07-11-4703 07-140 Part No. 07-20-4705 07-92 08-111 08-112 08-669 08-670 09-140 09-RB-2 09-RH-2 17-___ 62-14 Description 5/32 Offset Rivet Set, 3-1/2 O.A.L. Flush Mushroom Rivet Set Bucking Bar Bucking Bar Bucking Bar Bucking Bar Power Regulator Beehive Retainer Spring Handi Retainer Spring Rivet Gun Molded Plastic Carrying Case
Kit with TP83(3x) Gun ........................P/N 12-00240 ..................$298.00 Kit with TP84(4x) Gun ........................P/N 12-02011 ..................$296.00
Kit w/ TP83 gun (3x)..........................P/N 12-00347 ...................$723.00 Kit w/ TP84 gun (4x)..........................P/N 12-00498 ...................$718.00
691
RIVETING HAMMERS
RIVETING HAMMERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Part No. US1X US2X US5X US7X US 3X
These high quality riveting hammers are excellent for all light aircraft metal riveting applications. They feature a convenient offset handle (except Model US3AA which is straight handle) and come complete with retainer spring and regulator. All models feature metered teasing trigger, made in U.S.A.
2X
The standard tool used in aircraft manufacturing plants such as Boeing, Rockwell, Lockheed etc., is completely interchangeable with Chicago Pneumatic. These tools are slow hitting with excellent finger tip control. Accepts all .401 shank rivet sets and attachments. All guns are brand new and carry a full 1 year warranty.
Weight (Lbs.) 1/2 2-1/4 2.7 1/2 2-7/8 3.4 1/2 3-1/16 3.6 Price $148.95 $148.95 $148.95
Part No. Blows / Min. Capacity Alum. Bore Stroke 2X 3X 4X 2580 2160 1740 1/8 3/16 1/4
Capacity Weight Stroke Length (Lbs.) Alum. Bore 1/8 9/16 1-1/2 5-11/16 2 1/8 1/2 2-1/4 6-11/16 2-1/4 1/4 3/4 2-11/16 6-11/16 4-3/4 3/8 3/4 5-13/16 8-5/16 6
In the early stages of developing a truly recoilless/fatigueless riveting hammer, it was determined that the tools must meet certain goals. The main goal being a reduction in lowfrequency vibration in accordance with ISO Standard #5349-1986. In this standard are guidelines for the US 3R measurement and assessment of human exposure to hand-transmitted vibration. As a result, the following has been achieved: Ergonomic design: To maximize user comfort by achieving a relaxing, comfortable, lightweight and balanced tool Compact tool size: Since aircraft riveting is never standard, a tool that will allow the best overall access Retain user touch: A metered trigger which provides single or multiple blows per minute while maintaining the ability to set rivets in seconds Further dampen noise output. Least amount of parts: No similar tool is produced with fewer parts, thus enhancing reliability, but keeping it simple enough so that maintenance can be done by anyone. Independent testing* has shown these tools will greatly lessen job-related effects of prolonged exposure to vibration & boost user productivity.
This X type feathering trigger riveter is the only rivet gun that allows you to slowly begin riveting without damage to the skin. This is critical in performing riveting operations. This gun is used by aircraft mechanics worldwide. Its also the perfect tool for kit builders. NOTE: Long term exposure to low frequency vibration caused by riveting may be harmful to your hands and arms. We suggest you take frequent breaks when riveting to reduce this exposure. Features: * Takes .401 shank rivet sets * Lightweight aluminum handle * Price includes spring retainer & regulator (TP97) * Precision machined hardened and ground valve * Sure Grip powder coated finish * Teasing trigger * Precision machined and hardened cylinder for long life. Made in the U.S.A. 2X Rivet Gun (1/8 Capacity) ............. P/N 12-02004 ................. $148.95 4X Rivet Gun (1/4 Capacity) ............ P/N 12-02008 ................. $129.95
Virtually all the tools you need for riveting in kit form. Intended for professional sheet metal mechanics, serious home builder/students. Packed in a sturdy molded plastic case. #1 selling kit. Visit www.aircraftspruce.com for a complete list of kit contents. P/N 12-00240 ................. $298.00
SPECIFICATIONS
Capacity Part No. Bore Stroke Alum. Steel US3R 3/16 5/32 1/2 3 US5R 1/4 3/16 1/2 5 Blows per minute 1900 1400
Part No. Rivet Set dia Overall Length Weight Air Inlet Price US3R .401 7-7/8 3 Lbs. 1/4 NPT $379.95 US5R .401 9-7/8 3.5 Lbs. 1/4 NPT $384.00 Heavy duty industrial tools are manufactured to exacting standards to insure long service life. All critical parts, including the yoke, are fabricated from 4130 steel and heat treated to Rc 42-46. These rivet squeezers have earned a reputation for durability and reliability through years of service on the production lines of major airframe manufacturers such as Grumman, Piper, Beech and Cessna. Easily operated by one hand. All replacement parts and other yoke designs available. Features feathering throttle. MODEL 3000 6000 Max. Force 3000 6000 Rivet Capacity Dural 3/16 3/16 Steel 5/32 5/32 Standard Yoke Reach 2 2 Air Hose Size 1/4 1/4 Set Travel 9/16 9/16 Recommended Line Pressure 90PSI 90PSI Weight 6 LBS. 6 LBS. 3000...................................... P/N 12-03400 ................................ $593.00 6000...................................... P/N 12-03500 ................................ $688.00 SPECIFICATION Converts your conventional hand pop riveter into an economical RivNut installer tool. Size Part No. Price 6-32 ........... 12-13680........$11.75 8-32 ........... 12-13681........$11.75 10-32 ......... 12-13682........$11.75
Holder includes 3/32, 1/8, 5/32 and 3/16 cups for AN470 rivets, plus 3 flat sets for AN426 rivets. To be used with pneumatic or hand rivet squeezer. P/N 12-00555............................. $89.50
RIVET SIZE
Holder includes springback dimple dies for 3/32, 1/8 and 5/32 rivets. To be used with pneumatic or hand rivet squeezer. P/N 12-00560 ............................. $94.85
SCREW SIZE
Holder includes springback dimple dies for 6-32, 8-32 and 10-32 screw sizes. To be used with pneumatic or hand rivet squeezer. P/N 12-00565 .............................. $99.75
692
Designed to be used with a riveting gun or by striking with a hammer. For aid with dimpling and/or riveting applications. Acts as a holding fixture for .187 shank dimple dies or rivet sets. Weight: 4 lbs. P/N 12-00805.....$36.50
BUCKING BLOCKS
CM WP ME HA AP LG EP
*Can be used with TP93 Bucking Block ***Example: To order L = 3-1/2 - 1/8 Rivet specify: SM10SP-4264 Model # SM10SP*** SM10SD Cuppings For 100 Rivets (AN426) L 3-1/2 3-1/2 3/32 4263 Type Punch Die 1/8 4264 5/32 4265 Price $59.75 $39.30 3/16 4266
NOTE: These flush sets are universal for any diameter rivet. Order by part number referencing the length and diameter of the flush set required.
NOTE: These flush sets are universal for any diameter rivet. Order by part number referencing the length and diameter of the flush set required.
Description P/N Twin Blade Cutter 909 Moil Point 911 Body Ripper 1955 Panel Cutter 1957 Metal Trimmer 1959
Price Description P/N $18.75 Chisel 910 $13.50 Rivet Buster 912 $10.25 Spotweld Breaker 1960 $85.25 Scraper 905 $15.90 Flush Set SM97
CS IN EL AV TO PS BV
Retainer springs comes in two styles: Quick Change Type: Designed to make possible speedy changing of rivet set in rivet gun. Beehive Type: Designed as a fixed type to securely hold rivet set in rivet gun. Rivet Hammer Model # 1X-2X-3X-4X 5X-7X-9X E3-E5 100B-200B AVC12-AVC13 3R-5R Beehive Type Quick Change Type Part No. Price ea. Part No. Price ea. A1006-234X $7.75 A1006-579X $7.75 A1007-234X $4.90 A1006-234X $7.75 A1007-100B $7.50 A1007-234X $4.90 A1006-AVC $9.75 A1006-234X $7.75
RETAINER SPRINGS
Stubby Microstop 1/4-28 Threaded Shank for use in angle motors. Adjustable in 0.001 increments. 1/4-28 female threads. 1/2 cutter capacity. Rated for 3,000 RPM use. P/N 12-02893 .................... $19.25
STUBBY MICROSTOP
NOTE: These flush sets are universal for any diameter rivet. Order by part number referencing the length and diameter of the flush set required.
Excellent for limited access areas. Shank: 0.401. Surface Face: 1 x 1 1/2. P/N 12-02892 .................... $34.95
Spring loaded center punch for 1/8 OR 3/32 and larger rivet heads. This spring loaded center punch works great with universal aluminum head rivets, oval head and round head rivets. 1/8 ....................................... P/N 12-02464 ........$34.95 3/32 ..................................... P/N 12-02934 ........$34.95 For back riveting flush rivets on RV control surfaces and other homebuilts. Has a plastic Delrin sleeve with spring to hold multiple sheets of aluminum together while riveting. 0.401 shank x 4-1/8 inches long. Back Rivet Set 3-1/2 long ................. P/N 12-07100-3...........$31.80 ea.
T Flush Set New. Surface: 1 1/2 x 1/2. Overall Length: 5 3/4. Weight: 0.50 lbs.. Shank: 0.401. P/N 12-02894 .................... $14.95
T FLUSH SET
693
BUCKING BARS
CM WP ME HA
12-01308 1-1/2 Lbs $16.85 12-01309 1-1/4 Lbs. $16.60 12-01310 2-3/8 Lbs. $16.75 12-01311 1-1/4 Lbs. $16.75 12-01312 3-5/16 Lbs. $26.50 12-01302 2-3/4 Lbs. $33.75 12-01303 3 Lbs. $16.85 12-01305 3 Lbs. $16.75 12-01306 2 Lbs. $16.75 12-01307 1-3/4 Lbs. $16.85
Our bucking bars are cast with ductile iron to insure non-porous finish which is very important in order to have a highly polished finished surface. They are heat treated to 38-42 RC and therefore can be repolished many times without changing hardness. This wide selection of sizes, shapes, and weights enables the aircraft builder to pick the proper bar for his job. Made in the U.S.A.
AP LG
12-01313 1-1/4 Lbs. $17.00 12-01314 1/2 Lbs. $16.50 12-01315 1-1/2 Lbs. $60.75 TP-683 3-1/4 Lbs. $16.85
EP CS IN EL AV TO PS BV
12-00828 2-1/4 Lbs. $59.95 12-00841 1-1/2 Lbs. $17.95 12-01289 1-1/4 Lbs. $16.75 12-01290 1 Lb. $16.95 12-01284 6 Lbs. $36.75 12-01285 1-1/2 Lbs. $16.85 12-01319 1-3/4 Lbs. $52.85 12-01320 2-1/2 Lbs. $36.75
12-01281
3 Lbs.
$16.95
12-01286
3/4 Lb.
$36.50
$16.75
12-01292
2 Lbs.
$19.75
12-01294
2 Lbs.
$27.50
AT-618
1 Lb.
$16.85
$16.85
694
CM
5.25 lbs. ................................................ P/N 12-02907 .................$19.95
WP
The V-Drill Guide is like a portable drill press for precision alignment. Vgroove along the bottom of the guide allows for perpendicular alignment with all drill sizes on round parts and corners. Bottom surface is precision ground to assure stability and accurate perpendicular alignment on flat surfaces. Drill guide is sized for drill bit sizes: 1/8" to 3/8", and made for 17 standard drill sizes (1/8 to 3/8 in 1/64 increments). Guides are made from special nickel alloyed steel that is heat treated for durability. Drill Straight - Every Time! Drill Guide comes with a handy plastic storage case and is 100% American Made Quality. Features: Accurate - 90 degree V-groove along the bottom - automatically squares up the drill with the surface Portable - Pocket size - Reusable plastic storage tube Built to Last - Special nickel alloyed steel High Quality - Natural steel finish - non-plated - Heat-treated for durability. P/N 12-02937 .....................................$22.45
ME HA AP LG EP
V-TAP GUIDES
CS IN EL AV TO PS
The STI (Screw Thread Insert) V-Tap Guides are for Helicoil type taps to repair striped out threads. STI V-TAP Guide (Unified Course Threads): Can handle standard ground STI hand tap sizes: 9/16-12, 1/2-13, 7/16-14, 3/8-16, 5/16-18, 1/4-20, 12-24, 10-24, 8-32, 6-32. P/N 12-02940 ...................$20.66 STI V-TAP Guide (Unified Fine Threads): Can handle standard ground STI hand tap sizes: 5/8-18, 9/16-18, 1/2-20, 7/16-20, 3/8-24, 5/16-24, 1/4-28, 10-32, 8-36. P/N 12-02941 .......................2.95
BV
This starter kit contains the most commonly used bucking bars. Multifinished surfaces for numerous applications. Heat treated for durability. 1 AT638 Bucking Bar 1 AT681 Bucking Bar 1 AT647 Bucking Bar 1 AT670 Bucking Bar P/N 12-00840.................... $156.95
695
Used for hand dimpling of skins and small parts and for hand riveting of parts, assemblies, and spars. This tool maintains alignment of the dies to each other, and insures proper alignment to the work surface for superior dimpling results over either rivet gun or free-hand dimpling methods. Features include: 22 deep x 4 tall throat Heavy wall 1 x 2 steel tube arm Heavy wall aluminum channel base Bronze 1/2 I.D. guide bushings for shafts Heat treated and centerless ground stainless steel driver shaft (2) one shaft has flat end for riveting with rivet gun & one shaft accepts 0.187 shanks for dimple dies & sets. 1.5 extension shaft for dies Adjustable die holder block. Rivet Tool Return Spring Kit now included (Spring, collar and wrench). Great for one handed dimpling of skins and parts. Uses rivet, dimple and die sets with .187 shank. (Dies and sets sold separately) P/N 12-00177 ................. $213.95 DRDT-2 (AKA Dash 2) is a welded steel c-frame rivet dimpler. Replaces the common impact c-frame rivet dimplers of the past. With its ample mechanical advantage, dimpling is fast, easy, less fatiguing and safe on the skins. With a fully adjustable set holder you can achieve consistent and accurate dimples. The DRDT-2 incorporates a new low force spring return system that prevents skin damage from the accidental release of the handle without increasing the force required to dimple. 22 throat depth allows dimpling of up to 44 wide sheets. The relief under the lower frame member provides dimpling access to spars, ribs, leading edge skins. Designed and analyzed using state of the art engineering tools the DRDT-2 can handle all your dimpling needs on your project. The DRDT-2 is painted with an industrial powder coat giving one of the toughest finishes available. Features: Weight: 60 lbs Size: 28X16X3 Capacity: Up to 22 depth Gap: 4 Skin thickness: Up to 0.040 Aluminum. Dimple Dies: 3/16 shank Diameter. Rivet Dimpler ...................................... P/N 12-00907 ..................$399.00 Dimple Die Rivet Set .......................... P/N 12-00560 ....................$94.85 Dimple Die Screw Set ........................ P/N 12-00565 ....................$99.75
Tired of battling those rivet shanks stuck in the ribs and under other underlying structures after you have drilled the heads off and removed the skin? The Rivet Shank Removal Pliers will make short work of this unpleasant task and turn a two man job into a one man job. A handy, patented tool whhich will reduce labor time and costs. P/N 12-00745 ...........$65.50
This air-powered shear cuts straight lines or curves up to 180 inches/minute. An ideal shear for any aircraft builder. Cuts up to 18 gauge mild steel. Width of cut: 7/32. Length: 8-1/4. Wt. 2.14 Lbs. P/N 12-01330 ............................. $375.00
POWER SHEAR
This air-powered router is very light weight and features a straight handle and rear exhaust. Base is 1-1/2 and router guide is included. RPM: 20,000. Router shank: 1/4. Length: 6. Wt.: 1-1/2.12 Lbs. Made in U.S.A. P/N 12-01321 .........$285.95
ROUTER
This handy, economical tool removes chips and burrs on metal between sheets after rivet holes have been drilled. A recommended tool for any aircraft builder involved with sheet metal work.Router P/N 12-01304 .............$6.75
CHIP CHASER
(3) pieces for access into the most demanding applications. Each plier has a full 11 reach. Medium carbon steel, hardened, fully polished. Cushion PVC handles. Vinyl storage pouch. Model TP942............P/N 12-00364 ........... $35.75
The new M8R and M9R compound action snips possess the same outstanding durability as all the other products in the wide Wiss compound action line, but feature a right-angle blade that allow greater reach in overhead and other awkward applications. And like every other Wiss compound action snip, both the M8R and M9R have a unique blade edge, shaped to allow the material to set deeper and serrated to hold it tight during the cut. M8R - Compound action right angle blade cuts straight to left P/N 12-02007 .......... $24.85 M9R - Compound action right angle blade cuts straight to right. P/N 12-02006 .......... $24.85
HOLE DUPLICATORS
(DRILL BUSHING TYPE)
Provide an accurate means of drilling duplicate matching holes in overlapping sheets. Hole to be duplicated is drilled though bushing when pilot is in place......................................................................... $12.75 ea Part No. Pilot & Drill Size Part No. Pilot & Drill Size AT532-61 #40 (.098) AT532-63 #21 (.159) AT532-62 #30 (.129) AT532-65 #10 (.194) Lock on drill with set screw. Regulate hole depth, cushion the breakthrough. Eliminate surface marks & reduce drill breakage. #40 Drill P/N 12-08800 ........................$0.95 #30 Drill P/N 12-08900 ........................$0.95 #28 Drill P/N 12-09000 ........................$1.77 #21 Drill P/N 12-09100 ........................$1.15 #20 Drill .......P/N 12-09200 .. $0.96 #12 Drill ..... P/N 12-09300 ....$1.47 #10 Drill .......P/N 12-09400 .. $0.95 1/4 Drill ..... P/N 12-09500 ....$1.39 One of the smallest angle head designs for closequarter drilling operations. Made in USA. Features: 2800 rpm 90 angle head Rear exhaust 1/4 drilling capacity 59/64 angle head height 1/4-28 threaded spindle 12-5/8 length 78DB P/N 12-00241 ......... $324.50
DRILL STOPS
The ACAT 90 Degree Right Angle Drill is a high-precision, powerful, durable drill. 3200 RPM. Weight: 1.8 lbs. Length: 10 1/4. Accepts industry standard 1/4- 28 threaded bits. P/N 12-02859 ........ $247.95
ANGLE DRILL
These air powered pistol drills feature ergonomic design and use .90 H.P. motors. Sound level is a low 84 db while production output remains high with these high quality drills. Made in U.S.A. Part No. 12-00816 12-00815 12-00813 RPM Capacity Length Weight Price 4,500 1/4 6 2 lbs $526.00 1,800 3/8 6-1/2 2.6 lbs. $165.95 500 3/8 7-1/2 2.13 lbs. $661.00
696
Stanley brand professional hand pop rivet tool. Unique head design swivels 360 for riveting in any position, at any angle. Extended nose for hard to reach places. Built in handle latch. Die-Cast aluminum & hardened steel construction. Molded grips. Includes (4) interchangeable steel nose-pieces for: 3/32, 1/8, 5/32, & 3/16 P/N 12-00889 ................$46.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
A 10 thread extension is used for boring holes in hard-toreach places. Primary use is in the installation of the landing gear on the LongEZ and Cozy aircraft. 3/4 bore does not have 1/4 pilot and must use the pilot received with the 5/8 boring tool. 5/8 dia. w/1/4 pilot ....P/N 12-00219 .....$55.75 3/4 dia. w/o pilot.........P/N 12-00220 .....$39.50
COUNTERBORE
This deluxe dimple die kit has all the most commonly used dimple dies in one package--at a special price. This kit includes: 11113/32 Dimple Die Set 1- #14870 Female Die / 3/8 Dia. 1/8 Dimple Die Set 1- #14871 1/8 Female Die / 3/8 Dia. #6 Screw Dimple Die Set 1- #8 Screw Dimple Die Set #4520 Organizer Block for Dies P/N 12-00868 ..........................$231.95
2 Models available-one with NEEDLE bearing and one with BRONZE bushings. .001 increment depth adjustment. Positive adjustment lock. 1/4 dia. shank. 9/32 shaft travel. 9/16 cutter capacity. For 1/4-28 threaded cutters. Comes with NO-MAR foot piece. Rated at 3,000 RPM. Made in USA. With Bronze Bushings ........... P/N 12-01412 ......$36.25 With Needle Bearings ............ P/N 12-00940 ......$36.75
6 piece set of the most commonly used squeezer sets shown above: 3/32 & 1/8 cup sets; 1/8 modified cup set; 1/8 & 1/4 flush sets; & 1/16 by 3/8 dia. flush set; plus #4510 organizer block. P/N 12-00882 ...........$48.75
SET OF 4 RIVET SETS - 5-1/2 long sets. Used for hard to reach rivets in corners. High alloy steel and heat treated. Shanks are precision ground. Cuppings are polished. 3/32 Double Offset Rivet Set .....................P/N 12-00936 .......... $21.95 AVERY 1/8 Dbl. Offset Rivet Set ...............P/N 12-00873 .......... $25.50 5/32 Double Offset Rivet Set .....................P/N 12-00937 .......... $24.95 3/16 Double Offset Rivet Set .....................P/N 12-00938 .......... $28.75 4-PC Double Offset Rivet Set .....................P/N 12-00939 .......... $92.25
This angle drill kit includes a drill attachment with quality ball bearing construction for long life. Kit includes 12 threaded drills in assorted sizes and lengths, a mini 3-jaw chuck with 1/16 to 1/4 diameter capacity, and a molded storage case. Made in the U.S.A. Drill Sizes: 1 2 1 1 1 1 ea. ea. ea. ea. ea. ea. #2140 #3140 #3127 #3112 #4140 #20379 #40 stubby 1 ea. #2130 #30 stubby #40 short 2 ea. #3130 #30 short #27 short 1 ea. #3121 #21 short #12 short 1 ea. #3114 #1/4 short #40 long 1 ea. #4130 #30 long Mini 3-jaw chuck P/N 12-00883 ....................... $186.95
Avery cutting polishing wheels are a uniform blend of minerals and resins molded into wheel form with rugged, dense construction that provides aggressive polishing and blending action without removing excess base materials. These wheels generate uniform finishes and can remove minor surface imperfections. Use these wheels with a die grinder for deburring holes and edges. Small wheels are more versatile than large (6) wheels. Can be used on hand held parts or parts in the jig. These wheels are the same density, grade, and mineral type as the 7A MED 6 wheel. Kit Contents: (1) #936 Mandrel + (2) 1 x 1 x 3/16 Wheels (1) #932 Mandrel + (2) 2 x 3/4 x 1/4 Wheels ...........P/N 12-00876 ........$55.85 1 x 1 x 3/116 Hole Wheel ...........................P/N 12-01997 ..........$8.85 Mandrel for 3700 ............................................P/N 12-01996 ..........$8.50 2 x 3/4 x 1/4 Hole Wheel ............................P/N 12-01999 ..........$7.75 Mandrel for 3719 ............................................P/N 12-01998 ..........$9.75
Made in the U.S.A. High Speed Steel 1/4 -28 Threaded Shanks 100 3-Flute Precision Ground For Use in Micro-Stop Countersink Units 8 Sizes Available Pilot Size #40 (3/32 rivet) #40 (3/32 rivet) #30 (1/8 rivet) #27 (#6 screw) #20 (#8 screw) #12 (#10 screw) 5/32 (5/32 rivet) 3/16 (3/16 rivet) 1/4 (1/4 rivet) Decimal Equiv. .0980 .0980 .1285 .1440 .1610 .1890 .1560 .1875 .2500 Body Dia. 3/8 1/2 3/8 1/2 1/2 1/2 1/2 1/2 1/2 Part No. 12-00879 12-00942 12-00880 12-00943 12-00881 12-00944 12-00945 12-00946 12-00947 Price $13.75 $13.95 $13.90 $13.95 $13.75 $13.95 $13.95 $13.95 $13.95
Two Styles Available: Cut & Polish/Unitized Wheel7A Medium grade (harder) Use to radius and deburr edges of aluminum parts. These wheels give a uniform brushed satin finish to parts and deburr quicker and easier than hand finishing. These wheels are discs of Scotch-Brite web compressed and bonded to form a rugged, dense wheel. Wheel size: 6 dia. x 1 wide x 1/2 thru hole. .............................................P/N 12-00875 ............$71.50 Light Deburring Wheel-7S Fine Grade (Softer) Light deburring 7S Fin 6 x 1 x 1. This wheel has a 1 thru hole. To fit 1/2 order P/N 12-01585. ...................................P/N 12-00948 ............$63.25 3M Flange Adapter 3 45035 1/2..............P/N 12-01585 ..............$4.25
Marks easily on metal, ceramic, glass, plastic, wood and paper. Markings are fast drying, permanent, weatherproof. Wont rub off, run, fade, chip, peel or blister. The surface can be wet, dry, rough, smooth or oily. Efficient on any horizontal, vertical or inclined surface. Long-lasting 6 ball point tube with non-clogging paint. Black ...... P/N 12-11901 .........$7.50 Red ......... P/N 12-11907 ....$7.50 White ..... P/N 12-11908 .........$7.50 Yellow ..... P/N 12-11911 ....$7.50
TEMPIL MARKERS
Use when drilling in sheet metal to help eliminate drill breakage & surface marks. Safely keeps drill from going too far through the work. Drill stops have a coiled spring to cushion the drill breakthrough & prevents the drill chuck from marring the work surface. Color coded for easy identification. P/N 12-00867 ...........$11.50
697
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This custom made UHMW polyethylene plastic mallet is great for dimpling skins. Blows are more solid and much quieter than with steel hammers. Will outlast wood mallets. Hammer head measures 2.5 round x 4 long with 12 handle. Wt: 16oz. P/N 12-00605 ......... $39.75
New improved design. Heat treated 4130 steel investment casting with rolled threads. This special set holder is made to replace the rigid (2-9/16) set holder standard to most CP214 style pneumatic squeezers. This adjustable set holder will eliminate the need to shim the dies and sets with shim washers. Adjustments are faster & easier. P/N 12-00615 ...........$85.00 Note: Only for yokes with 1 thick base or less. Will not work in tandem units.
This custom made UHMW polyethylene plastic forming mallet is great for metal forming. Smooth radiused surfaces will not marr surface. Long life, split resistant. Mallet head measures 2.5 round X 5 long w/ 11 handle; Wt: 14 oz. Great combo to the shot bag. P/N 12-00607 ...........$39.65
For dimpling in hard to reach places. Works with any hand pop rivet tool. Can be used over & over. Works for both 100 & 120 pop rivets. Extra nails included (Uses standard hardware store nails). 2 sizes available. 3/32.........P/N 12-00613 ...........$24.75 1/8...........P/N 12-00614 ...........$24.50
For those builders that want to try their hand at metal forming this leather shot bag is a must have item. Leather shot bag made from 3/4 oz. top grain cowhide. The bag is double stitched and fills through a 1 opening sealed with Velcro. The bag is 12 round and 1-1/2 thick. Use lead shot #8 - #7.5; or sand - mortar quality type (shot can be purchased at local sporting goods or gun stores). P/N 12-00606 ...........$47.25
Note: The pop rivet dimplers show above are made with 100 angles, same as regular dimple dies. They will work with either solid flush rivets (AN-426 100) or with pull type rivets such as a AVEX rivets (120), etc. The dimple formed with these pop rivet dies will not be as sharp as dimples formed with regular dimple dies. This is because you get more pressure with a squeezer or a hammer than with a pop rivet puller; however, the dimples formed with pop rivet dimplers are adequate for occasional use in tight or hard-to-use places.
Has VISE GRIP locking feature to aid clamping & holding work. Use for straightening and bending rib and bulkhead flanges. Made with 7 vise grip plier. Jaws are made from 3/16 X 1 X 3-1/2 stainless steel with machined radius. TIG welded & polished. P/N 12-00608 ...........$58.75
U.S. MADE -- ATI Brand. New design flush rivet set with swivel action eliminates problem of rivet gun alignment with the work surface + rubber guard to reduce slippage while flush riveting. .401 shank X 1-1/4 dia. polished face. Built-in retaining spring. P/N 12-00741 .......... $44.75
Back riveting requires a hard flat surface to act as a bucking bar while you set the shop head of the rivet. Our plate is a perfect hard & flat surface for Back Riveting. 3/8 thick X 4 wide X 15 long. Low carbon steel plate with flat ground surface. Weight 10 lbs. P/N 12-00618 ..................$64.50
Make narrow & precise flutes for straightening ribs and bulkheads easier & better than pliers with molded jaws. Made with 7 VISE GRIP pliers. Pins are 3/16 dia. stainless steel. TIG welded & polished. P/N 12-00609 ...........$49.75
FLUTING PLIER
For forming flanges around lightening holes. Made from 2024 aluminum and hard black anodized. Ball bearing style rollers. Comes with spare set of rollers. P/N 12-00619 .......... $19.75
Made for dimpling in restricted and hard to reach places where regular dimple dies wont fit. Made with 7 VISE GRIP plier. Machined tool steel dimple dies are T.I.G. welded to the VISE GRIP jaws then polished. 2 sizes available (3/32 and 1/8). 3/32.........P/N 12-00611 ...........$49.90 1/8...........P/N 12-00612 ...........$51.50
Replacement rollers for our edge rolling & hole flanging tools (above). P/N 12-00621 .............$2.95
SPARE ROLLER-SET OF 2
Offset cutting tool, leaves 2 clean, finished edges. 8.5 length, .75 lb. Model TP133 - (Right hand snip, cuts left & straight)........................................ P/N 12-00366 ......................... $24.50 Model TP134 - (Left hand snip, cuts left & straight) P/N 12-00367 ......................... $22.75
LEVER SNIPS
Famous for cutting ease, keeping their edge and making clean, sharp cuts. Hardened molybdenum steel blades, serrated jaws and vinyl com12-01155 fort grips. Capacity 18 gauge (.049) steel. Length 9-3/4. Wt. 14 oz. P/N 12-01155- Cuts left, from tight curves to straight. ....................$17.65 12-01190 P/N 12-01189- Cuts right, from tight curves to straight. ....................$17.65 P/N 12-01190- Cuts straight (or wide curves left or right in light stock)....$17.65 12-01189
This offset blade design allows the sheet to pass under your hand. The steel forged blades keeps metal from stretching and causing puckering marks along the cut edge. 16 gauge mild steel capacity. 1.63 lbs. Model TP299 ............P/N 12-00369 ........ $53.85
Offset blades keep hands safely above material. Long cuts are easy because offset blades flow material away from blades. Light weight cast magnesium handles. Blades are easily replaceable. 13" long with 3" cut. P/N 12-02421...........................$34.75
Irwin offset snips handle virtually every cutting job in sheet metal - linoleum, carpet, tile and other materials. They are easier to use than conventional metal snips, and cut in 3 directions. Irwin snips feature forged steel blades, a unique curved handle for comfortable fit in the hand, and an exclusive pinchpoint wire cutter. They cut in three directionsstraight, sharp angles in one direction, and 5 diameter circles in the opposite direction. Irwin offset snips make difficult cuts easy - they can make tight circular cuts, cut easily through corrugated metal, and cut solid and stranded wire. Available in right or left cutting models. IRWIN (Right Cutting) ........P/N 12-00187 ...........$17.75 IRWIN (Left Cutting)...........P/N 12-00186 ...........$17.50
698
This handy device holds a marking pen and has an adjustable stop for running along the edge of a part. The adjustable stop allows variable edge distance for rivet layout, etc. One thumbscrew holds the pen (pen sold separately) and the other thumbscrew holds the adjustable stop. Made from delrin (plastic) material. Comes ready to use with (1) Pilot marking pen. P/N 12-00630 ...............$18.90 Set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish. Instructions included. P/N 12-00631 ...............$22.65 For pre-bending skin edges on lap joints and butt joints before riveting. Edge rolling will prevent skin edges from curling up during riveting. Machined round body made from 2024 aluminum. Hard black anodized finish for wear resistance. Ball bearing style nylon rollers (non marking); + spare set of rollers and instructions included. P/N 12-00632 ...........$23.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
One gauge measures -3, -4, -5, & -6 rivets. Used to check for proper length of rivets BEFORE setting. Eliminates measuring and guessing of rivet lengths. Works for both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet sizes permanently stamped. Gold anodized finish. Instructions included. P/N 12-00633 ............................$11.75
Initial fitting of control surfaces require multiple installation and removals of the parts to fit, trim, and adjust everything. These temporary assembly pins make the task quicker and easier. Pins are 3/16 diameter with tapered points and angle bends for easy installation. The pins are threaded so the pin holder can be removed this is necessary to prevent damage should you move the control surface too far during fitting. To remove pins just screw holder back on pin and remove pin. Packaged in sets: 6 pins / 2 holders. P/N 12-00627 ...........$18.90
US made. High speed steel, precision ground, three flute burring cutter. 3/8 diameter X 100 with 1/4-28 threaded shank. Same style as a countersink but without the pilot. P/N 12-00625 .......... $17.75
Reversible cutter for both 2-1/4 and 3-1/8 instrument panel holes. Easy to use even with instrument panel installed in aircraft. Allows for close work with other instruments already installed. 4 lbs (2Kg) shipping weight. P/N 12-02743 ..........................$134.75
Install or remove retaining rings of the Waldes Tru-Arc type with ease. Quality pliers made of heat-treated steel with vinyl covered handles. Kit includes two pair of pliers and two sets of four replacement tips to handle the most common sizes of both internal and external rings. Furnished in plastic box. P/N 4440R ................$25.95
This new tool lightly grips the heads of bolts and screws for easier insertion into tight or blind spots. No more dropped or lost parts. Tool has one end for -3 (3/16) fasteners and one for -4 (1/4) fasteners. 12 overall length. P/N 12-00628 ...........$20.75
BOLT GRIP
Heavy malleable iron body with latex-treated nylon webbing. For gripping and turning of round, hex or square parts without marring the surface.Indispensible tool for use in close quarters where ordinary pliers cannot be used. Tool is 11-1/2 long with 18 strap. Capacity 3. Wt. 1-1/2 lbs. P/N 3004 ..................$46.25
STRAP WRENCH
We stock straight shank and straight flute Chucking Reamers in a wide range of sizes.
CHUCKING REAMERS
Used to quickly deburr edges of sheets up to 1/8 thick. Save time and motion deburring edges of parts. Precision ground Carbide V shape blade with hex aluminum handle. Nonremovable cutter style. P/N 12-00629 ...........$21.85
699
SHOT BAGS
MODEL SLP1
MODEL SLP2
These slappers are made from grade A select midwestern grown hard maple for toughness, stiffness and durability. With an ergonomically designed grip area, the hand MODEL SLP3 MODEL SLP4 and wrist are positioned in a neutral and natural condition. Finished with protective oil that resists staining and guards against moisture penetration. 4 different shapes: gentle, medium, flat, and radius face. The new thinner cross-section of 2-1/4 allows working a tighter radius in more confined areas. Each slapper comes with a leather face cover to eliminate marring of the metal. Model Shape Overall Surface Face Weight Part No. No. Style Length Length Width (Lbs.) SP1 Gentle 14 8.5 2.25 1.3 SP2 Medium 14 8.5 2.25 1.3 SP3 Flat 14 8 2.25 1.3 SP4* Radius 14 8.5 2.25 1.3 SLP-001L Replacement leather cover & hardware 12-02311 12-02314 12-02315 12-01003 12-01004 Price $54.75 $54.75 $54.75 $54.75 $6.90
HARDWOOD SLAPPER
The most widely used selection of panel beaters and dollies for most metal shaping needs, provessional grade in a molded plastic box. Each hammer is color-coded for either shrinking (blue) or stretching (red) forming tasks. The 3 panel beaters included are the dinging, shallow-domed face a nd pick hammer combo. The dollies included are the thin toe, utility, curved and heel shapes, providing the user with the best combination kit on the market. See the individual sections on panel beaters and dollies for more specifications on each item. 8-piece kit includes: DT2566, DT2560 & DDT2537 panel beaters CP548, CP552, CP553, & CP554 dollies Blow molded plastic case. All tools made from medium carbon steel, forged, heat treated and mechanically polished for years of continuous service. Weight: 16.5 lbs.; size: 16.5L x 14W x 4H. P/N 12-01011 .............$151.95
12-01010 12-01009
12-01008
12-01007 12-01006 Model No. CP548 CP552 CP553 CP554 CP555 CP556
These professional series hand dollies are a complete selection of shapes and weights for most forming needs. These dolies can be used with panel beaters or wood slappers. Dollies weight and shapeimpacts the flow of the metal. Choose weights according to sheet metal thickness. Medium carbon steel, forged, ground, heat treated and mechanically polished for years of continuous use. Part No. 12-01005 12-01006 12-01007 12-01008 12-01009 12-01010 Price $28.50 $28.85 $29.50 $29.90 $39.25 $39.75
Simple, but necessary forming tool allows you to create new flanges or straighten out damaged flanges. Can be used effectively by taking to an existing body panel or locked in bench vise and create an exact radius edge using any flat faced panel beater or wood slapper. T-dollies are fabricated out of carbon steel hardened and zinc plated to provide years of service life. Extra long flat handle. Heads have radius ends. Model No. DCTD01 DCTD02 DCTD03 DCTD 3-pc. kit (8lbs.) Size (inches) 1x 8 3/4x 6 1x 8 Part No. 12-01019 12-01020 12-01021 12-01022 Price $14.85 $15.90 $17.85 $46.50
T-DOLLIES
12-01027 12-01029
12-01028
12-01030
These professional series panel beater hammers are uniquely balanced acting as a natural extension to the users own hand. Creating excellent feel and feedback each an devery time you contact the metal. Each hamer style is color coded for easy recognition: MODELS: DT2537 & DT2566 are Stretching. MODELS: DT2560 & D2569 are Shrinking. A 1.6 1.5 1.6 1.6 L 5.5 5.4 3.8 3.8 B 1.5 1.6 Part No. 12-01027 12-01029 12-01028 12-01030 Price $32.75 $32.95 $32.75 $32.95
Model Head Overall No. Wt./lbs Length DT2537 .67 13 DT2566 .57 13 DT2560 .70 13 DT2569 .70 13
These extended depth plastic mallets allow deeper reach and a more aggressive and fuller finished shape. The UHMW polyethylene heads are lightweight, resistant to wear and non-marring. Hickory handles with full round shafts. When paired with shot bags, very creative, roughed out forms can be accomplished. Overall Head Weight head Part No. Price dia. (lbs.) lgth 7 2 .70 12-01031 $47.50 8 2-3/4 1.3 12-01032 $48.50 7 3 1.5 12-01033 $52.75
Small radius dia. DBM01 1/2 DBM02 3/4 DBM03 1 Model No.
700
CM WP ME HA AP
Max Capacity 16 Ga (.050) Aluminum 19 Ga (.040) Mild Steel 21 Ga (.035) Stainless Steel
Used For Aircraft & Racecar, Construction & Repair. Includes Choice of 1 Set of 2-1/2 OD ($65 value) Rolls 24 Power Drive Bead Roller Model 210-24 .... P/N 12-02744 ....$695.00 36 Power Drive Bead Roller Model 200-36 .... P/N 12-02745 ....$895.00
Bead Rolls Sets Sold Separately Model 210-24M P/N 12-02746 ....$450.95 OD 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/8 3-1/4 3-1/2 3-3/4 4 5 6 7pc Set 1- 3 ( MINUS 2-1/4 & 2-3/4 ) 9pc Set 1- 3 13pc Set 1- 4 Part Number 12-02778 12-02779 12-02780 12-02781 12-02782 12-02783 12-02784 12-02785 12-02786 12-02787 12-02788 12-02789 12-02790 12-02791 12-02792 12-02793 12-02794 12-02796 12-02795 Price $105.00 $105.00 $120.00 $120.00 $130.00 $130.00 $146.95 $145.00 $145.00 $195.00 $195.00 $195.00 $210.00 $210.00 $260.00 $310.00 $665.00 $1,995.00 $897.00
LG EP CS IN EL AV TO PS
SEE WWW.AIRCRAFTSPRUCE.COM FOR ROUND ROLL AND STEP ROLL PART NUMBERS.
Wire Bead Roll Step 3 OD 2-1/4 3-1/8 Part Number 12-02797 12-02798 Price $105.00 $115.50
BV
Above Bead Rolls = $65.00 Per Set Model 201-125-WBS Wire Bead Roll (3pc. Set) P/N 12-02769 ....$200.00 See www.aircraftspruce.com for 100+ Bead Roll Selection
701
CM WP ME HA AP LG EP CS IN EL
Economical & versatile. Bench press accepts tooling for punching round, square & oblong holes; punching louvers; creating radius corners; & shrinking or stretching metal. Punch/flare tooling & instrument hole punches. Easily mounted with included adapters. Can also Be used as arbor press. Model 2200-M P/N 12-02770 ....$575.00
LOUVER PUNCHES
A Rugged, Robust Machine for the occasional metalworking project to the professional craftsmen. All wheels (anvil & top) are heat treated, hard turned & ground for accurate precision metal forming. 26-1/2 Deep Throat 2-1/2 OD - 2 Wide Anvils 7 OD - 2 Wide Top Wheel Cam Action Release on Top wheel For Easy Anvil Change Adjustable Anvil Wheel Angle 3 x 4 x 1/4 Tube Construction For Minimum Deflection Kick Wheel Manual Pressure Adjustment Anvil Wheels In Radius Of 2-3/8,3-1/4,5, 8-1/2,12 & Flat Model 2900 .......................................... P/N 12-02812 ............$1,425.00
PLANISHING HAMMER
Speed up fabrication time on complex multi form aluminum and steel panels for making those impossible to find replacement parts. 4600 Hits Per Minute @ 90 PSI Rear Adjuster Sets Load Force & simplifies Anvil Changes Foot Pedal Control for Hands Free Operation 9 Radius Anvil Heads Included: 3/4 , 1-1/2, 2, 3, 4, 6, 8, 12 & Flat 12 Model 2700.................................... P/N 12-02813 ...............$850.00 24 Model 2700-24 ............................. P/N 12-02814 ...............$999.00
AV TO PS BV
The ULTIMATE Box & Pan Brake has a unique 3 Finger design. Incorporating moveable segmented bed fingers & apron fingers as well as upper radius fingers. Radius fingers allow forming aircraft and racecar panels using 3003 to 2024 T3 aluminum, .062 mild steel & .0375 stainless steel . Bend combinations that were extremely difficult if not impossible before are easily formed. Features include wrenchless upper set back adjustments, 3-1/2 depth of box, 2 down leg,1 front to rear adjustment & 1/4 reverse bend capabilities. A complete set of upper radius fingers (your choice), bed fingers, apron angle fingers, and counterweight(s) are standard equipment. Ultimate 48 16ga Box & Pan Brake With Radius Fingers Model 2800-48-16 ........................................... P/N 12-02799 .$3,450.00 Upper Radius Finger Kits (radius is measured inside of bend) 12 KIT 1/16 2800-A255-K12 (12) P/N 12-02801.............$275.00 1/8 2800-A260-K12 (12) P/N 12-02803..............$275.00 3/16 2800-A270-K12 (12) P/N 12-02805..............$275.00 1/4 2800-A280-K12 (12) P/N 12-05807..............$275.00 5/16 2800-A290-K12 (12) P/N 12-02809..............$343.95 48 KIT 1/16 2800-A255-K48 (48) P/N 12-02802..............$835.00 1/8 2800-A260-K48 (48) P/N 12-02804............$835.00 3/16 2800-A270-K48 (48) P/N 12-02806..............$835.00 1/4 2800-A280-K48 (48) P/N 12-02808..............$835.00 5/16 2800-A290-K48 (48) P/N 12-02811..............$835.00
15 x 15 Cast Aluminum Pads 1500 Lbs Per Pad Capacity Lbs. or Kg Reads to 1 Lb. / 1/10% Accurate Displays All Information at Once Zero All Pads at Once or Individually 40 Hr. Battery Life (rechargeable) Certification Available At Optional Cost. Deluxe Aircraft Scales include custom length cables with Deluxe Stainless Steel connectors and software to calculate center of gravity height. 4500 lbs. Model 50297 ........................................ P/N 12-02816 ............$1,115.00
702
Black Max spiral screw extractor grips screw firmly with its tapered, left-handed spiralflutes. Intended to remove screw manually with T-handle tap wrench or equivalent. Features: Black oxide coating for maximum corrosion protection and cutting performance Black oxide coating combined with a tough carbon tool steel construction ensures longer life Extractor size is permanently etched on the tool for quick and easy reference. Specifications To remove Bolts/Screws: 3/32 to 5/32 Use Drill Bit Size: 5/64 Shank Diameter: 1/8 Point Diameter: 0.060 Description 3/32 TO 5/32 5/32 TO 7/32 7/32 TO 9/32 9/32 TO 3/8AND 1/8 PIPE 3/8 TO 5/8AND 1/4 PIPE 5 PIECE SET Part No. 12-02873 12-02874 12-02875 12-02876 12-02877 12-02882 Price $2.29 $2.29 $2.29 $2.89 $3.45 $10.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The JackClamp 2 Clamp Kit includes 2 JackClamps, 2 Spreader Jaw Accessories, 2 V-Jaw Accessories, 2 JackClamp Foot Accessories, and a convenient carry-all bag. The JackClamp is a multi-use clamp for a variety of different projects. The 12 JackClamp features standard and metric rulers and is capable of clamping over, under, inside and through different configurations. This tool does what other clamps are mechanically unable to do including re-configuring to function as a hoist , jack, or spreader. The Spreader Jaws allow even more flexibility with the JackClamp including spreading materials with a gap as small as 1/4. The V-Jaws secure clamping and can hold round stock or irregular shapes. The Foot accessory allows for hand free jacking and works great for cabinet installation. Note: JackClamp 2 Clamp Kit includes 2 JackClamps, 2 Spreader Jaw Accessories, 2 V-Jaw Accessories, 2 JackClamp Foot Accessories, and a convenient carry-all bag. .................. P/N 12-02852 ................$186.95
The unique V-Jaw JackClamp accessory allows secure clamping including holding round stock and irregular shapes. P/N 12-02848 ..................$14.75
The Ryobi cordless Hand Planer has the power of a corded hand planer when powers through the toughest jobs. The rear mounted kickstand keeps blades from contacting surfaces when the unit is placed shoe down between operations. The pommel front handle and rear handle designed with overmold for added comfort. Dust ejection adjusts for left or right exhaust. All these great features are a part of the Ryobi ONE+ system which has have 40 tools and batteries. Depth adjustment knob adjusts from 0-1/64. Dual carbide blades for smooth, accurate planning. Rear mounted kickstand keeps blades from contacting a surface when the planner is set down between aperations. Extended front for balance and accuracy. MFG Brand Name : Ryobi. MFG Model # : P610. MFG Part # : P610 18 V Planer .......................................... P/N 12-02824 ................$100.00 BI P100 ONE+ Nickel-Cadium 18-V Rechargable Battery P/N 12-02825 ..................$57.25 P131 ONE+ 18-V IN-Vehicle Charger . P/N 12-02826 ..................$57.25
RYOBI PLANER
The Spreader Jaw JackClamp accessory allows more flexibility with your JackClamp including spreading materials with a gap as small as 1/4. P/N 12-02849 ..................$14.75
The JackClamp durable Foot accessory allows hands free jacking. P/N 12-02847 ....................$9.75
Kit includes: (1) 18 Volt Planer - The Ryobi cordless Hand Planer has the power of a corded hand planer when powers through the toughest jobs. The rear mounted kickstand keeps blades from contacting surfaces when the unit is placed shoe down between operations. The pommel front handle and rear handle designed with overmold for added comfort. Dust ejection adjusts for left or right exhaust. All these great features are a part of the Ryobi ONE+ system which has have 40 tools and batteries. (1) P100 ONE+ Nickel-Cadmium 18-Volt Rechargable Battery - The Ryobi ONE+ Nickel-Cadmium 18-Volt Rechargeable Battery provides extended run-time and works with all present and past Ryobi 18-volt ONE+ tools and chargers. (1) P131 ONE+ 18-Volt In-Vehicle Charger - The Ryobi ONE+ 18-Volt In-Vehicle Charger is compatible with all past and present Ryobi 18-volt ONE+ NiCd and lithium-ion batteries. It plugs conveniently into a vehicles 12-volt DC outlet and takes less than an hour to charge the batteries fully. ..................................................... P/N 12-02827 ................$215.95
The JackClamp Accessory Kit includes the Spreader Jaw, V-Jaw, and Foot accessories for the JackClamp. The Spreader Jaw allows even more flexibility with the JackClamp including spreading materials with a gap as small as 1/4. The V-Jaw secures clamping and can hold round stock or irregular shapes. The Foot accessory allows for hands free jacking and works great for cabinet installation. Note: JackClamp Accessory Kit includes the Spreader Jaw (1 pair), VJaw (1 pair), and Foot (1) accessories for the JackClamp Parallel Bar Clamp. P/N 12-02853 ..................$41.95
The Spinning Ratchet driver hand tool is a highly versatile ratchet driver that allows the operator to work in tight fitting areas that no other ratchet driver can. Snap any 3/8 male socket attachment into the handle end and any 3/8 female socket or attachment on to the driver end to get the needed reach or angle for the job at hand. The Spinning Ratchet tightens and loosens nuts and bolts like a standard ratchet driver as well as by twisting or spinning the handle in place. A must for any mechanic or handyman. ...................... P/N 12-00742 ..................$25.90
703
Can be used to knock out those hard to reach stubborn fasteners. Available in 1/8", 5/32", 3/16", and 1/4" tip diameter. Also available in a 4 piece set. Size 1/8 Part No. 12-02927 12-02926 12-02928 12-02929 12-02925 Price $13.95 $13.95 $13.95 $13.95 $55.95
The Digital Fractional Caliper brings you three universal systems of measurement, making it an equally practical choice for both professional and do-it-yourself projects. The high-contrast digital display easily switches between inches, millimeters and fractions, with guaranteed accuracy to 0.001. In addition, the rugged stainless steel design delivers accurate readings of inside, outside, step and depth measurements. The Fraction+ comes with a foam padded plastic case for safe storage when not in use. Features * Stainless Steel Caliper. * Tri-Mode digital display inches, millimeters, and fractions. * For making inside, outside, depth and step measurements. * Resolution 0.0005 (0.01mm). * Accuracy 0.001 (0.02mm). * Auto on/off feature preserves battery life. * Bar scale is graduated in inches and millimeters. * Free-wheeling friction roller advances and retracts slide. * Extendable depth gage for use in slots and small holes. * Etched and filled black graduations. * Convenient foam-padded case for storage. Digital Fraction Caliper - 6 .........................P/N 12-02012 ...........$39.50 Digital Fraction Caliper - 8 .........................P/N 12-02013 ...........$52.75 Digital Fraction Caliper - 12 .......................P/N 12-02014 ...........$79.95
Three universal systems of measurementGuaranteed accuracy to 0.001. Delivers accurate readings of inside, outside, step and depth measurements. This 3 caliper fits conveniently into your pocket for working in the field. Range 0-3 (0-76mm) Resolution 0.0005 (0.01mm or 1/64). Accuracy 0.001 (+/- 0.02mm). Auto on/off feature preserves battery life.Free-wheeling friction roller advances and retracts slide. Extendable depth gage for use in slots and small holes. Replacement Battery - SR54 or LR54 P/N 12-02307 ........... $16.75
Center It is a jig used to drill holes in pipe or tube stock. To use the Center It, simply place it on your drill-press table, run the bit down (with the motor off) to hold the centered jig on the bit, then bolt the jig to the press table. No clamping of the tube is necessary; the angled flats of the jig hold it in a centered position. Your holes are automatically centered on the tube with no center-punching necessary. If the tube is too fat to drill in a single operation, simply turn it over. The device is useful to kitplane builders who have to drill several holes in a single tube or many tubes because no clamping or center-punching of the tube is required. It also makes short work of drilling. P/N 12-20815 ...... $13.85
DIGITAL CALIPER
0-6 Digital caliper with measuring resolution of .0005; large LCD display and hardened stainless steel measuring faces and slide. Masures in inches or milimeters. Includes plastic case. P/N 12-02705 ........... $17.35
0-1 Dial indicator with measuring resolution of .001; equipped with mounting lug on back of body for multiple mounting options. P/N 12-02709 ........... $24.95
DIAL INDICATOR
Light and portable, this tool provides straight and true holes every time. Your electric hand drill will perform like a professional drill press. The easy, accurate way to drill any curved surface: Simply place the Drill Rite VGuide on any type of pipe or round stock, from 1/2 to 2 1/2 in diameter. Swing the gate closed and lock it down. Insert the proper drill bit in the guide bushing and drill a precisely accurate hole. Includes super hardened drill bushings for popular 3/16 and 1/4 holes for rivets and aircraft hardware. Precision made in the U.S.A. from high quality aircraft grade aluminum. P/N 12-00836. ......... $51.75
One piece heat treated tool steel jig. Use for accurate & fast drilling of rivet holes for plate nuts. Has flexible handle design. Use for both on lug (both holes on 1 side) & two lug (holes on both sides) style nut plates K1000 & K1100 style nutplates. #6 Plate Nut Drill Jig....................................P/N 12-03041 ...........$46.25 #8 Plate Nut Drill Jig....................................P/N 12-03042 ...........$46.50 #10 Plate Nut Drill Jig..................................P/N 12-03043 ...........$46.25
0-1 Professional grade micrometer with measuring resolution of .0001; carbide anvil faces for long life and durability. Includes plastic case. P/N 12-02707 ........... $39.95
704
A handy air powered vacuum works off an air compressor and is simple to use. Attached 12 clear plasticflex tube can easily get into tiny spaces to clean. The canvas bag is easily removed for cleaning. P/N 12-01474 ...........$16.00 Ideal for removing chips and burrs from between metal after drilling rivet holes. Each chaser features a plastic molded handle and flexible steel blade with hook on the end. Blades are 5.5and 2.5 long. 2.5 ...................P/N 12-01597 .............$2.85 5.5 ...................P/N 12-01476 .............$3.25 Swivel action of this tool makes deburring holes fast and easy. Shaft includes a 1/4-28 threaded holder. *Flute De-burring cutter sold separately - PN 12-00625........................P/N 12-01478 ...........$12.75 Accessories Swivel Handle Only .....................................P/N 12-00623 ...........$17.75 Extension Shaft only....................................P/N 12-00624 .............$8.50 HSS 3 Flute De-burring cutter .....................P/N 12-00625 ...........$17.75 Designed to remove surface blemishes in aircraft sheet metal. Hard chrome plated. Comfort grip handle. P/N 12-01479 .............. $8.70
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CHIP CHASER
BURNISHING SPOON
Used in limited access areas, requires less travel per activation. P/N 12-01480 .............. $4.90
CLECO PLIERS
long wear and tool life. .187 (3/16) shank. *2 Flush sets required for Flush Head Rivets. 1 Flush and 1 Cup required for Round Head Rivets. *Sold as individual items / not a pair Descriptipn Part No. Price Description Part No. Price Flush 1/2 12-01559 $1.71 Flush 1/8 12-01466 $1.71 Cupped 1/8 12-01561 $2.30 Flush 3/16 12-01554 $1.71 Cupped 5/32 12-01562 $2.50 Flush 5/16 12-01556 $1.71 Cupped 3/16 12-01563 $2.30 Flush 3/8 12-01557 $1.75 Flush 7/16 12-01558 $1.71 Holds 3/16 die sets Adjustable set holder Stainless steel construction. 1-1/2 ..........P/N 12-01547 .......... $49.85 3 ................P/N 12-01548 .......... $61.75 For any .187 shank diameter squeezer. 3/32 ..................P/N 12-01468 .......... $11.75 1/8 ....................P/N 12-01564 .......... $11.75 5/32 ..................P/N 12-01565 .......... $11.80 3/16 ..................P/N 12-01566 .......... $11.85 Economy Dimple Die Set Includes: 3/32, 1/8, 5/32, 3/16 P/N 12-01467 .......... $46.75
*Useful in removing screws that are corroded or have stripped heads *401 Parker taper shank for use in rivet gun *3/8 square socket end *Use standard Phillips or Slotted insert bits *Rivet gun required *1/4 hex adapter not included 4 Tool........................... P/N 12-01567 .......$18.95
This tool permits you to set the desired cut depth to help eliminate mistakes and skin damage. 1/4 Shaft travel Depth adjustable in .001 increments 1/4-28 Female Threads Rated for 3,000 RPM P/N 12-01470 ...........$21.50 This high quality, durable rivet cutter features all steel construction and cuts 1/16 to 1/4 diameter rivets. It is adjustable for 1/4 to 3/4 long rivets. P/N 12-01471 .......... $39.85 2.5" Straight & Offset Rivet. Made of steel and heattreated for long tool life. The precision made cups are highly polished. .401 shank Length: 2.5" Cup Sizes: 3/32", 1/8", 5/32" & 3/16" For AN470 rivets 2.5" Straight 3/32".............................P/N 12-02318 ........................$6.80 2.5" Straight 1/8"...............................P/N 12-02319 ........................$6.50 2.5" Straight 5/32".............................P/N 12-02320 ........................$6.35 2.5" Straight 3/16"............................P/N 12-02321 ........................$6.80
MICRO-STOP
Use when drilling in sheet metal to help eliminate drill breakage & surface marks. Safely keeps drill from going too far through the work. Drill stops have a coiled spring to cushion the drill breakthrough & prevents the drill chuck from marring the work surface. Color coded for easy identification. #10..........P/N 12-01488 ......$0.95 #20 .......... P/N 12-01489 ......$0.95 #30..........P/N 12-01490 ......$0.95 #40 .......... P/N 12-01491 ......$0.95 #1/4.........P/N 12-01492 ......$0.95 #5/16 ....... P/N 12-01493 ......$0.95 Where torque application accuracy is critical these tools meet the requirement. They offer excellent rigidity and surpass other wrenches in overall quality and efficiency. Wrench Type A is for sizes 1/2, 9/16, 5/8, and 3/4 hex nuts. Wrench Type B is for 3/8 and 1/2 internal hex. Type A 1/2 ................................ P/N 12-01525 ............................$14.85 Type A 9/16: .............................. P/N 12-01568 ............................$14.85 Type A 5/8 ................................ P/N 12-01569 ............................$14.85 Offset blades keep hands safely above material. Long cuts are easy because offset blades flow material away from blades. Light weight cast magnesium handles. Blades are easily replaceable. 13 long with 3 cut. P/N 12-02302 ............................$44.50
DRILL STOPS
705
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
For drilling an accurate hole in overlapping sheets. The Bushing type duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. P/N 12-01498 is pictured. Part No. 12-01494 12-01495 12-01496 12-01497 12-01498 Price $6.85 $6.85 $6.85 $6.85 $6.85 Description #10 13-1/4 #20 13-1/4 #30 13-1/4 #40 13-1/4 1/4 13-1/4 Part No. 12-01499 12-01501 12-01502 12-01503 12-01504 Price $9.85 $7.75 $9.85 $7.75 $9.85
The tool features serrated jaws for improved gripping and a slip joint for improved leverage. Ideal for all common cannon connector applications. P/N 12-01531 ......................... $14.85 Set of four gauges for -3, -4, -5, -6 rivets. Each gauge measures Minimum height and Minimum diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish. P/N 12-01533 .............$9.85 One gauge measure -3, -4, -5, -6 rivets. Used to check for proper length of rivets Before setting. Eliminates measuring and guessing of rivets lengths. Works for both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped. Blue anodized finish. P/N 12-01534 ............$4.95 Use these different length extensions in your 90or 45 drills. 1/4-28 male threads on one end and 1/4-28 female threads on other. 2 .................. P/N 12-01535 ..................$3.50 4 .................. P/N 12-01536 ..................$3.50 6 .................. P/N 12-01537 ..................$3.50
Description #10 6-1/4 #20 6-1/4 #30 6-1/4 #40 6-1/4 1/4 6-1/4
For drilling an accurate hole in overlapping sheets. The inverted type duplicator allows you to locate a hole from the back of an overlaping sheet. #10 #21 #30 #40 1/4 drill sizes, 6-1/4 or 13-1/4. PN 12-01507 is pictured. Part No. 12-01505 12-01506 12-01507 12-01508 12-01509 Price $6.85 $6.85 $6.85 $6.85 $6.85 Description #10 13-1/4 #20 13-1/4 #30 13-1/4 #40 13-1/4 1/4 13-1/4 Part No. 12-01510 12-01511 12-01512 12-01513 12-01514 Price $6.10 $9.85 $9.85 $9.85 $9.85
Description #10 6-1/4 #20 6-1/4 #30 6-1/4 #40 6-1/4 1/4 6-1/4
For inserting into drilled holes already bored and marking exact center for opposite hole. Available size: 5/16, 1/4, 3/16, 5/32 and 1/8 Description Part No. Price Description Part No. Price 5/32 12-01772 $1.15 5/16 12-01775 $1.15 1/8 12-01771 $1.30 1/4 12-01774 $1.15 3/16 12-01773 $1.15 This tool allows the quick removal of burrs and roughness from the edges of sheet metal. .25 or .187 in diameter grooved blade with safety shield. Safety-grip plastic handle. P/N 12-01527 .............$9.50
Use these different length extensions in your 90or 45 drills. 1/4-28 male threads on one end and 1/4-28 female threads on other. Comes in three different lengths1?2?4. 2................................... P/N 12-01541 .......... $3.85 4................................... P/N 12-01542 .......... $3.85
A slim design thats only 11/16 outside diameter. Used for those narrow areas that cant be reached with a standard micro-stop. 1/4 Shaft 1/4-28 Female Threads Adjustable in .001 increments 1/2 Cutter Capacity Rates for 3000 RPM use. P/N 12-01790 ........... $19.50 This micro-stop reaches into very confined areas. 5/16 Quick-change Shaft or regular chuck 1/4-28 Female Threads Adjustable in .001 increments 3/8 Cutter Capacity Rates for 3000 RPM use P/N 12-01789 ........... $42.75 1/4 Shaft 1/4 -28 Female Threads Adjustable in .001 increments 11/16 Cutter Capacity Rates for 3000 RPM use P/N 12-01788 ........... $25.50 Made of steel and heat-treated for long tool life. The precision made cups are highly polished. .401 shank. Length: 5.5. Cup Sizes: 3/32, 1/8, 5/32 & 3/16. For AN470 rivets Size Straight Price Offset Price 3/32 12-02326 $7.50 12-02330 $8.25 1/8 12-02327 $7.50 12-02331 $8.25 5/32 12-02328 $7.50 12-02332 $7.35 3/16 12-02329 $6.85 12-02333 $7.35 This rivet set has a soft face to prevent damage to the fastener when inserted or removed. Fits into any standard rivet gun or air hammer that supports .401 shank tooling. Surface: 1 Length: 3 1/8 Nylon Rivet ................................ P/N 12-02342 .......... $8.35 Aluminum Rivet ......................... P/N 12-02343 .......... $8.75
SLIM MICRO-STOP
EDGE BREAKER
Air Swivel Connector W/ Regulator (Pictured to the left) ...................................P/N 12-01530 ...........$11.50 Air Swivel Connector .......P/N 12-01529 .............$9.95 Air Swivel Regulator ........P/N 12-01545 .............$7.95
This rivet set has a soft face to prevent damage to the fastener when inserted or removed. Fits into any standard rivet gun or air hammer that supports .401 shank tooling, 3 1/8 overall length. ......... P/N 12-01543 ......$8.20
Rivet set adapter sleeve, .401 shank. Made of hardened steel (SKD11) and is open at both ends to allow maximum riveting power. P/N 12-01544 .......$13.20 Nylon These top quality twisting lock pliers with automatic return are economically priced and extremely durable. Features a sharp cutting edge and will twist up to .060 dia. safety wire. Length 6& 9. Foreign made. 6................. P/N 12-01472 .......$19.90 12............... P/N 12-01473 .......$19.75
Aluminum Radius Check is a hand-held tool which can be used to check the radius of parts and panels used in the construction or restoration of aircraft. Also used extensively in the restoration of antique and classic automobiles. P/N 12-21595 .......... $35.85 16 leaves, especially for checking radius of inside and outside fillets and corners. Checks 1/32 to 17/64 by 64ths. P/N 432A ................. $22.50
RADIUS CHECK
These Camloc Pliers are used to depress #2600, #2700 and #4000 series Camloc (C-LOCK) studs so they can be properly installed. Pliers are manufactured from forged steel and feature polished bearing surfaces to avoid scratching the stud as it s being installed. The grips are rubber cushioned for extra comfort and to reduce slipping. P/N 12-01475 .............. $16.75
CAMLOC PLIERS
706
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
RED BOX FLUSH RIVET SET RED BOX 3.5 RIVET SET
Size 3/32 1/8 5/32 3/16 Size 3/32 1/8 5/32 3/16 Straight 12-02051 12-02052 12-02053 12-02054 Straight 12-02334 12-02335 12-02336 12-02337 Price $5.65 $5.50 $6.25 $5.90 Price $7.90 $8.65 $7.35 $7.35 Offset 12-02322 12-02323 12-02324 12-02325 Offset 12-02338 12-02339 12-02340 12-02341
P/N 12-02050 .............................................$7.25 Price $5.85 $5.85 $5.85 $5.85 Price $8.85 $7.85 $7.85 $7.85
Narrow type fluting pliers are used for straightening out or coaxing sheet metal into the correct shape. This tool makes narrow and precise flutes in sheet metal. P/N 12-01782 ........................ $16.75 This tool holds your rivet, small bolt, or screw so you can get into those hard-to-reach areas. .. P/N 12-01791 ......................$6.85
RIVET HOLDER
se with your rivet gun to easily remove Huck and HiLok type collars. Shank: 0.401 Size includes 1/8, 5/32, 3/16 & 1/4 Overall Length: 5 1/2 1/8.......................P/N 12-02275 ............... $15.95 5/32.....................P/N 12-02276 ............... $15.95 3/16.....................P/N 12-02277 ............... $15.95 1/4.......................P/N 12-02278 ............... $15.95 5.5 & 7.5 Flush Set Made of steel and heat-treated for long tool life. Faces are polished to a high luster for smooth, precise riveting. .401 shank Surface: 1 Length: 5.5 & 7.5 5.5: .........................P/N 12-02273 ............... $12.85 7.5 ..........................P/N 12-02274 ............... $15.75
2 inch diameter turnbuckle wrench easily rotates turnbuckle while chain tool holds the cable ends in precise alignment and prevents them from rotating. P/N 12-01795..........................$28.75 This tool consists of two clamps joined by sprocket type (bicycle) chain. When clamped to cable and fittings at each side of the turnbuckle, anchor the cable to allow free adjustment of the turnbuckle. The adjustment becomes a two hand instead of three hand adjustment. P/N 12-01794..........................$25.75 Useful for quickly tightening and loosening a nut or bolt particularly where other types of P/N 12-01797............................$5.50
TURNBUCKLE WRENCH
use with Jiffy style rivet gun. Made of steel and heattreated for long tool life. The precision made cups and highly polished. 401 shank, Length: 1-3/16, Cup Sizes: 3/32, 1/8, 5/32 & 3/16, For AN470 rivets 3/32 x 1-3/16 ....P/N 12-02381 ................. $5.95 1/8 x 1-3/16 ......P/N 12-02382 ................. $5.95 5/32 x 1-3/16 ....P/N 12-02383 ................. $5.95 3/16 x 1-3/16 ....P/N 12-02385 ................. $5.95 ECONOMY JIFFY OFFET RIVET SETTER - For use with Jiffy style rivet guns. Made of steel and heattreated for long tool life. The precision made cups are highly polished. 401 shank, Length: 1-3/4, Cup Sizes: 3/32, 1/8, 5/32 & 3/16, For AN470 rivets 3/32 x 1-3/4 ......P/N 12-02387 ................. $6.45 1/8 x 1-3/4 .......P/N 12-02388 ................. $6.45 5/32 x 1-3/4 .....P/N 12-02389 ................. $6.45 3/16 x 1-3/4 ......P/N 12-02390 ................. $6.45 ECONOMY RIVET GUN PUNCH - For use to remove rivet after collar is split. Made of steel and heat-treated for long tool life. 401 shank, Length: 3-1/2, Punch size includes: 3/32, 1/8, 5/32 & 3/16 & 1/4 3-1/2 x 1/8 ........P/N 12-02392 ................. $6.95 3-1/2 x 5/32 ......P/N 12-02393 ................. $6.95 3-1/2 x 3/16 ......P/N 12-02394 ................. $6.95 3-1/2 x 1/4 ........P/N 12-02395 ................. $6.95
Scraper Blade, 2 wide x 6.5 long x 3/8 thick. Designed for use with a rivet gun (.401 shank). Phenolic scrapers are perfect for safely removing sealant, adhesives, stickers, labels, grime, and more. P/N 12-01796..........................$11.95 Made of 4130 steel and heat-treated to perfection. 7 long x 1 wide Body thickP/N 12-01793............................$9.85 Designed to use when installing Hi-Lok style fasteners. Includes set screw and Allen key. 1/8............................ P/N 12-01785 ...........$6.75 5/64.......................... P/N 12-01786 ...........$6.75 3/32.......................... P/N 12-01787 ...........$6.75
PHENOLIC SCRAPER
SKIN WEDGE
ness 1/4
HEX KEYS
Has a 5/16 quick change shaft on one hand and 1/4 -28 female threads on the other. Allows you to chuck threaded drill bits or countersinks into a quick-change chuck. . P/N 12-01781 ...........$6.25 Excellent for limited access areas. 60 Angle .401 shaft P/N 12-01777 ........................ $30.75
60 C-SET
ECONOMY JIFFY FLUSH RIVET SETTER - For use with Jiffy style rivet
gun, polished flush surface Length: 1-3/16, For AN470 Rivets P/N 12-02386 ................. $5.85
FORD WRENCH
Allows tool change in seconds. Designed for drilling bits, countersinks, etc. with quick-change ends. 3/8 x 24 thread. P/N 12-01778 ........................ $15.00 This C-Rivet Set bends around obstacles and allows you to reach into awkward areas for riveting. 3/16 diameter hole for any squeezer sets or dimple dies with 3/16 shaft 401 shaft P/N 12-01776 ........................ $28.75
General-purose adjustable wrench Sliding Jaw Forged from Crescent special Analysis Tool Steel Chromeplated Precision Machined
11 Wrench ....................... P/N 12-01784 .................. $23.75 Designed to quickly and efficiently mix all types of prefilled Semkit packages. Has a 1/4 shank. Chuck it up in your drill to mix Semkit sealant tubes. P/N 12-01792 .................. $16.85
SEALANT MIXER
707
ATS6100 1/4 (6.4 mm) Jacobs Chuck Two-stage (Low/High) Control Trigger 5-7/8 (150 mm) Overall Length 1.54 lbs (.7 kg) 2,800 RPM Free Speed P/N 12-01424 ............................ $93.75
708
Includes: Precision for Wood Blade Progressor Wood Blade Tight kerf blade -- T244D Zero-clearance Insert Non-marring Footplate Carrying Case Features: 6.4 Amps Precision Control system One-Touch blade change Quick bevel adjust cast aluminum foot Constant Response circuitry T-shank machined plunger Robust 3-point connection No blade play On/off blower switch 4-position orbital control Variable speed trigger Variable speed dial Lock on button Adjustable dust blower keeps cutting line clear P/N 12-01765 ...... $186.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
MODEL NO. ROS20VSK - Features: Best all-around sanding performance and convenience. Twist-off translucent dust canister shows dust level and detaches easily. Ant-spillback design prevents dust from spilling on removal. Bosch Microfilter system traps dust particles as small as 1/2 micron. Hook-Tight hook-and-loop disk attachment ensures firm grip of standard hook-and-loop sanding discs. Comfortable, ergonomic soft-grip top and body Integral pad dampening system prevents swirl marks Soft microcellular backing pad ensures smooth, fine finish on flat or contoured surfaces. Variable-speed dial allows matching of speed to work piece and task. P/N 12-01766 ........ $98.25 MODEL 3365 - Includes: (2) WoodrazorTM Blades,
Guide Fence, Blade Wrench, Chip Bag. Features: Powerful 5 Amp Motor, 18,000 RPM. ElectronicallyCounterbalanced Single-Blade System automatically positions blade at ideal cutting angle. Eliminates uneven planing caused by misaligned blades. Equipped with Bosch Woodrazor micrograin carbide blades, which resist fractures from nail and staple strikes. Ratcheting Depth Knob. No need to rezero the depth. Chip Ejection Switch. Edge Guide Fence. Has a protective shield that covers the section of blade not in use. Lock-off Release Button. Park Rest Stand Double insulated, UL listed, complies to OSHA. P/N 12-01767 ...... $109.95 This drill includes a new ergonomic design for outstanding comfort and durability. The 4-pole open frame motor provides more power in a smaller size and the durashield housing is constructed to withstand jobsite conditions. Includes: (2) - 18V High Capacity Lithium-ion SlimPack Batteries (1) - Lithium-ion Battery Fast Charger (1) - Doublesided Philips Drive Bit (1) - Carrying Case Features: Optional Flexible Power System (FPS) Provides Choice of Max Run Time or Minimum Weight Ratcheting Single Sleeve in. Chuck- For one handed bit changes LED Light- Great for dark or enclosed areas Soft-Grip Wrapped Housing - Fits comfortably in hand for extended working time Variable Speed Trigger- Provides maximum control Bosch Lithium-ion HC batteries - Provides up to 50% more runtime, cold weather performance in -4 deg temps, and fuel gauge Bosch Advanced Lithium-ion Technology delivers optimized performance through Electronic Cell Protection (ECP), Unique Pack Design which keeps the battery cooler, and Electronic Motor Protection (EMP) which protects motor in heavy duty applications. P/N 12-02948 ...... $226.95 Features: 6 Amps, 11,000 RPM Lock-on/off switch for extended use applications Service MinderTM brushes Eliminates guesswork, stops the tool when preventative maintenance is required Epoxy Coated Field Windings Provides ultimate protection against abrasive dust and metal debris 5/8 -11 Spindle wide flexibility for mounting most popular accessories Spindle Lock For quick wheel changes Double insulated, UL listed, complies to OSHA 2-Position auxiliary handle specifically designed and angled to a natural position for maximum comfort and control. P/N 12-02685 ...... $169.85
MODEL 22618 - Features: Innovative Hammer & Anvil System delivers up to 1,950 in/lb of torque 1/2 Square Drive Anvil Soft-grip handle, not the user, absorbs the impact during fastening applications Reduces fatigue and stress, provides maximum cushioning and comfort Cutting-edge, high-performance motor and all-metal gears Super fast operating speed, delivering a category-best 3,200 BPM and 2,800 RPM Optional Gear Box Cover For Added Protection Lightweight 4.6 pounds and 6.5 inches in length Incredibly versatile for use in dozens of drilling, fastening and driving applications Aluminum gear housing with protective rubber front Variable-speed trigger For complete control Externally accessible brushes For easy brush replacement Multi-purpose reversible tool hook Multiple-position swivel LED lighting system Increases visibility - great for dark or enclosed areas P/N 12-01757 ...... $317.95
MODEL 22618 - 12V Battery for medium-duty jobs. 14.4V Battery for heavy-duty jobs. The Most Powerful Impact Wrench In The Line Up! 18V Battery for heavy-duty jobs. Faster and more powerful than standard impact drivers. The most lightweight driver in the line up. 9.6V Battery for medium-duty jobs Includes (2) -- 2.4A-h Batteries - BAT181 (1) -- 30 Minute Charger BC130 (1) -- Tool Hook - IMPKHOOK (1) -- Carrying Case - Included (1) -- Gear Box Cover P/N 12-01758 ...... $306.95
The Lithium-Ion Jig Saw (JSH180-01) is up to 30% lighter weight than the leading competitor and up to 10% smaller. The 1 handed blade insertion and ejection offers most convenience and ease of use while the small grip diameter reduces user fatigue during extended use applications. Includes: (2) 18V Lithium-Ion FatPack Batteries - BAT618, (1) 1-Hour Charger, (1) Carrying Bag. Specifications: Battery/Charger: 1 Hour Charger. Bevel Angle Range: 45 Degrees. Length: 10.24. Max. Capacity in Steel: 3/8. Max. Capacity in Wood: 3 1/2. No Load SPM: 0-2, 700. Stroke Length: 1. Voltage: 18V. Weight (lbs.): 5.3. P/N 12-02958 ...... $423.00
Powerful 6.0 amp motor, 16,500 RPM for fast stock removal and a smooth finish. Electronically-counterbalanced, single-blade system automatically positions blade at ideal cutting angle. Reduces drag and provides fast operation and a smooth finish. Eliminates uneven planing caused by misaligned blades. Equipped with Bosch Woodrazor micrograin carbide blades. Ratcheting depth knob that allows for fool-proof setting of depth increments from 0 to 1/16 (1.5 mm). Also features an edge guide fence. A protective shield covers the section of blade not in use. Amperage: 6.0. Cord Length: 10. Country of Origin: Malaysia. No Load RPM: 16,500. Planing Depth: 0 - 1/16 (1.5 mm). Planing Width: 0 to 3-1/4. Rabbet Depth: 5/16. Rating: 120V AC. Shoe Length: 11 - 1/8 P/N 12-02823 ...... $188.95
709
SUNEX TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
SUNEX AIR RATCHET SX3825
3/4 Impact Wrench. 1400 ft.lbs. of quiet power. One hand forward/reverse. Quiet Tech exhaust system delivers 90 dBA. Weighs only 7.55 lbs. .. P/N 12-02613 ......................................... $571.00 1/2 Impact Wrench with 2 extended anvil. 750 ft.lbs. of quiet power. 1100 ft.lbs. of breakaway torque. One hand forward/ reverse. Quiet Tech exhaust system delivers 82 dBA. Weighs only 4.3 lbs. P/N 12-02612 ................... $235.95 3/8 Impact Wrench SX4335 P/N 12-02610 ................... $236.95
3/8 Air Ratchet. 50 ft. lbs. of quiet power. 80 dBA makes it the quietest in its class. Weighs only 2.7 lbs. P/N 12-02615 ................. $148.95
1/2 Impact Wrench. 750 ft.lbs. of quiet power. 1100 ft.lbs. of breakaway torque. One hand forward/reverse. Quiet Tech exhaust system delivers 82 dBA. Weighs only 4.3 lbs.. P/N 12-02611 ................... $242.95
3/8 Impact Ratchet Wrench. 300 ft. lbs. of quiet power. One hand forward/reverse. Quiet Tech exhaust system delivers 79 dBA. Weighs only 2.75 lbs. P/N 12-02616 ................. $221.95
1/4 Straight Die Grinder. 25,000 max. RPM of quiet speed. Only 85 dBA. Weighs only 0.9 lbs. P/N 12-02617 ................... $66.75
1/4 Angle Die Grinder. 20,000 max. RPM of quiet speed. Only 82 dBA. Weighs only 1.1 lbs. P/N 12-02618 ................. $112.95
1/4 Air Ratchet. 30 ft. lbs. of quiet power. 84 dBA makes it the quietest in its class. Weighs only 1.45 lbs. ... P/N 12-02614 ...................... $148.95
3 Reversible Cut-Off Tool. Reversible spark direction with 18,000 max. RPM. Strong 0.9 horsepower motor. Only 83 dBA. Weighs only 3.6 lbs. P/N 12-02619 ................... $102.95
2 ANGLE GRINDER
SXC606 Specification
Wheel Size (In.) Length (In.) Maximum Speed (RPM) Air Inlet (In.) Minimum Hose Diameter (In.) Avg. Air Consumption (CFM) Weight (Lbs.)
* Built-in regulator * Accepts .401 Parker taper shank chisels * Ideal for standard duty applications * 3 pc. chisel set included * Quick change retainer sprping P/N 12-01934 ..................... $41.75
* Durable comfort grip * 90 angle head for restricted areas * 360 adjustable rear exhaust directs air away from work * Built-in speed regulator * Locking throttle lever for safety * High-torque motor for maximum efficiency PN 12-01942 ......................$113.95
710
SUNEX TOOLS
SUNEX SOCKET SETS 1/2 DRIVE STANDARD 13 PIECE SAE IMPACT SOCKET SET 3/8 DRIVE MASTER 29 PIECE METRIC IMPACT SOCKET SET
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2650 Includes: 7/16 1/2 9/16 5/8 11/6 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 P/N 12-01945..........................$63.50 * CR-MO alloy steel for long life * Fully guaranteed * Heavy duty blow mold case 3329 Includes: 14 Standard Sockets:: 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 14 Deep Sockets:: 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm P/N 12-01955........................$126.95
CM WP ME
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2651 Includes: 7/16 1/2 9/16 5/8 11/6 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 P/N 12-01946..........................$79.50
3/8 DRIVE MASTER DEEP 28 PIECE SAE & METRIC IMPACT SOCKET SET
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2652 Includes ;10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 26mm 27mm P/N 12-01947..........................$48.75
* CR-MO alloy steel for long life * Fully guaranteed (excludign adapter) * Heavy duty blow mold case 3360DD Includes: 14 Deep SAE Sockets:: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 14 Deep Metric Sockets:8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 1/2 (F) x 3/8(M) Adapter 3 Extension P/N 12-01956........................$116.95
HA AP LG EP CS IN EL AV TO PS BV
1/2 DRIVE DEEP MASTER 29 PIECE SAE & METRIC IMPACT SOCKET SET
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2653 Includes: 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 26mm 27mm P/N 12-01948..........................$79.50
* CR-MO alloy steel for long life * Fully guaranteed * Heavy duty blow mold case 5153DD Includes: 13 Deep SAE Sockets: 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 14 Deep Metric Sockets: 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 26mm 27mm 2 Deep Flip Sockets: 3/4 P/N 12-01949........................$229.00
1/2 DRIVE DEEP SPINDLE NUT 4 PIECE METRIC IMPACT SOCKET SET
* Deep design for GM & Chrysler spindle nut applications * CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2838 Includes: 30mm 32mm 34mm 36mm P/N 12-01951..........................$71.85
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 2840 Includes: GM Hubcap Lock Remover, GM Sprocket Hubcap Remover, Ford & Chrysler Hubcap Lock Remover, Large Univ. Locking Lug Nut Remover, Large Wheel Cover Lock Remover, Remover for Stripped 18mm Lug Nuts, Oversize Wheel Lock Remover, GM M & F Body Wheel Lock Remover, Lug Nut Remover Punch P/N 12-01952..........................$59.50
* CR-MO alloy steel for long life * Fully guaranteed * Heavy duty blow mold case 2669 Includes 19 Standard Sockets: 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 26mm 27mm 30mm 19 Deep Sockets: 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 26mm 27mm 30mm P/N 12-01950........................$189.00
1/2 DRIVE EXTRA THIN WALL 9 PIECE SAE & METRIC WHEEL PROTECTOR IMPACT SOCKET SET
* CR-MO alloy steel for long life * Fully guaranteed * Heavy molded storage tray 3325 Includes: 12 Standard Sockets: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 12 Deep Sockets: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 P/N 12-01954........................$112.95
* Durable outer sleeve and insert protects high polished wheels and lug nuts from damage * Fully guaranteed * Heavy duty blow mold case * CR-MO alloy steel for long life 2849 Includes 6 SAE Sockets: 3/4 (light green) 13/16 (purple) 7/8 (green) 15/16 (brown) 1 (silver) 1-1/16 (black) 3 Metric Sockets: 17mm (blue) 19mm (yellow) 21mm (red) P/N 12-01953..........................$93.75
711
SUNEX TOOLS
SUNEX WRENCH SETS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* High density, dropped forged alloy steel for strength * Raised panel design * Comes with sturdy metal clip for storage 9707 Includes: 942-1-5/16, 956-1-3/4, 944-13/8, 960-1-7/8, 948-1-1/2, 964-2, 952-1-5/8 P/N 12-01967 .....................$114.95
* Fully polished drop forged alloy steel * 1/2 Drive * Reusable blow mold storage tray 9722 Includes: 97746-1-5/8, 97752-2, 97748-13/4, 97754-2-1/8, 97750-1-7/8, 97756-2-1/4 P/N 12-01972 ......................$89.25
* Canvas pouch included * Raised panel design * High density, dropped forged alloy steel for strength 9714 Includes: 712-3/8, 726-13/16, 714-7/16, 728-7/8, 716-1/2, 730-15/16, 718-9/16, 732-1, 720-5/8, 734-1-1/16, 722-11/16, 736-1-1/8, 724-3/4, 740-1-1/4 P/N 12-01970 .......................$56.25
* Fully polished drop forged alloy steel * 3/8 Drive * Mounted on a convenient storage rail 9710M Includes: 971010-10mm, 971015-15mm, 971011-11mm, 971016-16mm, 971012-12mm, 971017-17mm, 971013-13mm, 971018-18mm, 971014-14mm, 971019-19mm P/N 12-01969 ......................$32.85
* Fully polished drop forged alloy steel * Mounted on storage rail for convenience * Reusable blow mold storage tray 9730 Includes: 97324-24mm, 97328-28mm, 97325-25mm, 97329-29mm, 97326-26mm, 97330-30mm, 97327-27mm, 97332-32mm P/N 12-01973 ......................$55.25
* Canvas pouch included * Fully polished drop forged alloy steel * 15 and 60 angled ends for added convenience 9914 Includes: 991401-3/8, 99140813/16, 991402-7/16, 991409-7/8, 991403-1/2, 991410-15/16, 9914049/16, 991411-1, 991405-5/8, 9914121-1/16, 991406-11/16, 991413-1-1/8, 991407-3/4, 991414-1-1/4 P/N 12-01975 .......................$73.25
1/4 air die grinder. Built-in regulator. Exhaust directed away. Lever throttle for positive lever control. Die Grinder .................... P/N 12-01124 ..........$59.50
Muffled handle exhaust. Heavy-duty, ball and needle construction. Pneumatic. P/N 12-01122.....................$106.50
* Canvas pouch included * Fully polished drop forged alloy steel * 15 and 60 angled ends for added convenience 9914M Includes: 991404M-6mm, 991408M-13mm, 991403M-7mm, 991409M-14mm, 991402M-8mm, 991410M-15mm, 991401M-9mm, 991411M-16mm, 991405M-10mm, 991412M-17mm, 991406M-11mm, 991413M-18mm, 991407M-12mm, 991414M-19mm P/N 12-01976 .......................$57.75
* Lever throttle for positive speed control * Ball detent socket retainer * Rear exhaust * Also available: 1/4 head kit
SX1068 Specification Free Speed(RPM) @90PSI Torque (ft.lbs.) @90PSI Square Drive Min. Hose Size Recommend Air Pressure (PSI) . Average Air Consumption (CFM) Sound Level (dBA) Length(In.)
* 3/8 Drive * Fully polished drop forged alloy steel * Mounted on a convenient storage rail 9708 Includes: 970802-3/8, 970810-5/8, 970804-7/16, 970812-11/16, 970806-1/2, 970814-3/4, 970807-9/16, 970818-7/8 P/N 12-01968 .......................$27.85
* Ring socket retainer for rapid socket changes * Front bumper for added protection * Built-in regulator for added protection * Reliable dog clutch mechanism for dependable service * Reliable dog clutch mechanism for dependable service P/N 12-01937 ..................... $88.75
* Fully polished drop forged alloy steel * 1/2 Drive * Reusable blow mold storage tray 9720 Includes: 97732-1, 97734-1-1/16, 97736-1-1/8, 97738-1-3/16, 97740-1-1/4, 97760-1-3/8, 97744-1-1/2 P/N 12-01971 .......................$62.25
* Built-in regulator * Accepts .401 Parker taper shank chisels * An excellent general purpose hammer * Quick change retainer spring P/N 12-01935 ..................... $42.75
712
SUNEX TOOLS
SUNEX 20 TON CAPACITY AIR BOTTLE JACK
* Designed for operating either manually or pneumatically * Air hose can swivel in any direction * Fitted with safety valve to prevent overloading * Two piece handle allows for easy pumping * Extension screw gives added height when necessary * Minimum air pressure required is 90 PSI, 7 Bars * Double spring return 4920BAH Specifications: Capacity (Tons)-20, Power Lift (In.) -7, Closed Height (In.) -10.5, Raised Height (In.) -20.1, Add. Screw Adj. (In.)-3.5, Base P/N 12-01958 ....................$308.95 * This combination makes for the ultimate cart * The locking drawer and locking top are keyed the same, so the user only has one set of keys * Clip-on roller-bearing slides on drawer * Large, easy to maneuver 4 wheels: 2 locking and 2 standard, Chrome 16 gauge steel frame, Durable powder coated finish, 3 deep shelves, Available colors: red, blue, black & yellow 8013A Specifications: Load capacity (lbs.)-350, Shipping weight (lbs.)-69.5 P/N 12-01963 ....................$233.95 * 2 locking mechanism for stability * Made from cast iron with steel handle threads 87602 Specifications: Base Swivel- 360 deg. P/N 12-01961 ....................$123.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
* All four sized spark plug sockets in one convenient set * Fully polished chrome vanadium alloy steel for durability * Universal joint design for easy access in confined areas * Rubber inserts hold spark plug securely during installation and removal * Includes new 9/16 size * Convenient blow mold case * Fully guaranteed 87602 Specifications: 8844-9/16, 8844-5/8, 8844- 3/4, 8844-13/16 P/N 12-01966 ......................$39.75
* For general purpose metal cutting 3 x 1-/16 double reinforced * Use with 3/8 arbor * Do not exceed 20,000 RPMs * Comply with ANSI B7.1/OSHA regulations. 87602 Specifications: Diameter (In.)-3, Qty. Included -5, Max RPM -25,000 P/N 12-01965 ......................$10.50
* Includes 5 flat tip drivers and 3 Phillips tip drivers * Hardened chrome vanadium shafts * Vapor blasted magnetic tips * Packaged in heavy molded plastic tray for storage * Hex bolsters on most sizes for extra turning power 87602 Specifications: 98061-3/8 x 8, 980625/16 x 6, 98063-1/4 x 4, 98064-3/16 x 3, 98065-1/4 x 1-1/2, 98066-#2 Phillips x 4, 98067-#1 Phillips x 3, 98068-#2 Phillips x 1-1/2 P/N 12-01974 ......................$13.95
* Bright, flexible work light * Has two 6 grit wheels: coarse 36 and medium 60 * Each wheel has protective spark guard and adjustable eye shield * Mounting holes and rubber feet make grinder easy to mount on a stand (optional - part #5003 or 5005) or use on an approved worktable or workbench * Conveniently placed, easy to use on/off switch * Long, 6-foot power cord * Cast iron base for durability * Ball bearing construction for smooth operation * 1/2 Arbor accepts standard 6 wheel * UL & CSA Listed * Includes: eye shields ( RS500119B) & tool rests ( RS500135B) 5001A Specifications: Power-1/2 HP Motor, No Load speed .3450 RPM Motor -3.5 Amp, Voltage -115V/60Hz, Shipping Wt. (Lbs) -22 P/N 12-01959 ....................$156.95
* 1 Rugged steel tube construction * Oversize frame for added comfort * Tapered frame and head reast for extra clearnace in tight areas * 3-1/2 Heavy duty chrome finished casters with rubber tread * 5-Position stick shift headrest adjustment sytem * Rear drop frame design for extra leg comfort 8515 Specifications: Length (In.)-45.5, Width (In.)-19, Height (Headrest Down)5, Height (Headrest Up)-9.5, Shipping Weight (lbs)-29.0, Bed Size-30.625 x 16.5 x 2.5 P/N 12-01964 ....................$186.95
* Can be assembled to make a two or three jaw puller when additional stability is needed * Reversible jaw design for added versatility and a broader range of pulling capability * Ideal for pulling gears, bearings, pulleys and other press fit parts 3908 Specifications: Maximum reach (in.)-5.5, Maximum spread (in.) -7 P/N 12-01957 ......................$35.25 * Sets all conventional, standard blind rivets and all structural blind rivets, mono bolts and t-rivets up to and including 3/16 diameter in all materials * Comes with nose pieces in 3/32, 1/8, 5/32, and 3/16 sizes * Features a pulling (traction) power of 1,983 lbF @90PSI * Forged aluminum handle * Nose pieces stored conveniently underneath base of gun * Minimum air pressure required is 90 PSI, 7 Bars * Includes blow molded storage case SX0918T Specifications: Air Pressure (PSI) -75-90, Stroke Length (In.) -11/16, Height (In.) -12-3/8, Weight (Lbs.) -3.70, Min. Hose Size (I.D.) -3/8, Air Inlet Size (NPT) -1/4. * Tips available on special request. P/N 12-01933 ....................$262.95
* 8016 - 3 Drawer Unit * 8011 - Large Locking Screwdriver/Pry Bar holder * 8004 - Side Work Bench * 8014 - Leg extension Drawer liner sold separately Note: This item is purchased as a complete unit with the accessories listed above. 8013ADLX Specifications: Load capacity (lbs.)-350, Shipping weight (lbs.)-115.5, Color: Blue-8013ABLDLX, 8844-13/1613/16 P/N 12-01962 ....................$467.95
Includes angle blade pry bars in lengths of 12, 17 and 25 and boast a handle specifically designed to ensure a no slip grip allowing the user maximum leverage and control. Each pry bar also has hardened, tempered blades for unmatched strength and durability. Specifications Weight: 4.1lbs Length: 25.8 Height: 1.9 P/N 12-02451 ......................$51.50 Helps to get you into those tight spots and help you with removal, fastening, and pick up of fasteners and parts. Features: Includes: 1/4 Magnetic Bit Driver, 1/4 Socket Driver, and a 2 in 1 Magnetic Claw Pick-Up Tool. Flexible ends bend to desired angles. Extra long 24 length shafts. 1/4 Bit Socket accepts all standard bits. 1/4 Socket Driver can be used with all 1/4 sockets and bit sockets. P/N 12-02450 ......................$38.75
713
Polisher is ergonomically form fitting, light weight and easy to use Ball bearing mounted motor Includes reversible side handle for left or right hand operation Built-in regulator for adjusting free speed range from 1,500 to 2,500 RPM RPM: 2,500 CFM: 6 Pad Size: 7 Noise dB: 93 Air Inlet: 1/4 Max Pressure: 100 Length: 13 Weight: 4.8lbs P/N 12-02555 ...................$175.95 The V716P is ideal for polishing and buffing paint, metal, wood or plastic. It has an adjustable speed control and a unique muffler design. Side handle is standard equipment and fits either the left or right side of polisher. Free Speed: 0-4,000 RPM Motor: 1 HP Average Air Consumption: 8 CFM Air Inlet Size: 1/4 NPT Spindle Size: 5/8-11 Sanding Pad: 7 Weight: 6 lbs. P/N 12-02556 ...................$359.95 Mini-size and light weight for easy use in tight areas Designed for extended use Powerful high torque motor Lever throttle trigger Built-in air regulator for positive speed control Special high speed ball bearings for vibration-free performance Rubber grip for non-slip feel and insulates from cold air Muffling system with rear exhaust RPM: 2,500, CFM: 10.5, HP: .3, Pad Size: 3, Noise dB: 80, Air Inlet: 1/4, Max Pressure: 90, Length: 6.30, Weight: 1.8lbs, Warranty: 1 year P/N 12-02557 ...................$209.95 Rear exhaust directs air away from work surface Equipped with silencer to reduce noise Precision air motor with exceptionally high turning force Precision ball bearings for longer life Can be used for internal and external finishing Quick change belt replacement system Built-in speed regulator Reaches normally inaccessible areas Light weight ergonomic handle design for control and comfort Rubber grip for non-slip feel and insulates from cold air Grind off contact wheel or platen 360 head rotation provides versatility for every job RPM: 16,000, CFM: 14.2, HP: .37, Noise dB: 80, Air Inlet: 1/4, Max Pressure: 85, Vibration: 3.8, Length: 10-7/16, Weight: 2, Warranty: 1 yr. P/N 12-02558 ...................$249.95
7 ANGLE POLISHER
1/4 Angle Type Air Die Grinder VT3000A Lightweight - powerful compact design All ball bearing construction for longer tool life Self-locking safety throttle lever to prevent accidental starts Ergonomic positive grip Rear exhaust P/N 12-02551 .....................$92.25
Industrial duty Durable precision machined and hardened steel gears Precision air motor with exceptionally high turning force High quality ball bearings for longer tool life Safety throttle lever Ergonomic square handle design for positive grip Rear exhaust P/N 12-02552 .....................$96.25
Heavy duty performance and power in a light weight grinder Ergonomic rubber grip for greater operator com fort and safety Precision machined and hardened steel gears Precision air motor with exceptionally high turning force High quality ball bearings for longer tool life Safety throttle lever Front exhaust P/N 12-02554 ...................$192.95
Compact, low profile angle head enables easy access to tight areas Light weight and powerful Comfortable lever throttle One hand quick reverse lever Ergonomic design with elastomer handle grip for improved comfort Heavy duty ball and needle bearing construction Planetary gear reduction balances the drilling load and maximizes performance Precision air motor with exceptionally high turning force P/N 12-02559 ...................$148.95
714
This manual tubing bender comes standard with the following round tube die sets: 3/8 OD x 2 CLR; 1/2 OD x 2.25 CLR; 9/16 OD x 2.5 CLR; 5/8 OD x 3 CLR; 3/4 OD x 3.5 CLR; and 7/8 OD x 4.25 CLR. It also includes a 3/4 Square x 3.75 CLR and 1 Square x 4.25 die sets. Sturdy cast iron frame that can be bench or pedestal mounted for ease of use. Even though this tube bending machine is very powerful, it has been designed to take up little shop floor space. This is the perfect manual tubing bender for the home hobbyist, metal artist, or small fabrication shop with low run requirements. Specifications: Capacities Round Tube(OD): 7/8 max Capacities Square Tube: 1 max Wall Thickness: .047 max Bend Angle: Up to 180 deg Power: Manual Shipping Dimensions (L/W/H): 25/15/6.5 Shipping Weight: 61 lbs P/N 13-08972 ...................$189.95 This bending machine is extremely powerful and can bend up to 2-1/2 OD mild steel with a wall thickness of .120 and 2 OD chromoly with a wall thickness of .120. Also has three unique speeds. The proper speed for each application depends on the material type, OD and wall thickness. Speed one (4 degrees per pull) has the most torque and would be used for bending 2 OD Chromoly or 2-1/2 OD mild steel. Speed two produces 8 degrees (for intermediate materials), while speed three produces 12 degrees (for lighter gauge materials) with each pull. Operator can bend to 200 degrees without re-pinning. It ships via UPS in four separate boxes to keep freight rates reasonable. Some assembly is required. P/N 13-08973 ...................$927.00 This bending machine can be fitted with hundreds of round and square tubing die sets as well as round pipe dies sets with a maximum center line radius up to 7. This manual tube bender uses a large diameter indexing plate that allows the fabricator to bend up to 206 degrees (180 degrees plus spring back) in one shot without having to re-index and re-pin common on most other manual pipe benders on the market. Each pull of the handle bends the material approximately 8 degrees. When requirements are for lighter gauge materials this tube bending machines indexing unit can be shut off and the handle can be put into a manual override housing that allows the operator to simply walk around the manual bender and bend without the power of the indexing unit. Includes the stand, degree dial, and handle. P/N 13-08974 ................$2,235.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
All Specs based on 60,000 PSI (42 kg/mm2) Tensile Strength - Mild Steel. Specs are to be used as a base line for purchase purposes only. Baileigh Industrial cannot control Variations in Material.
This quality English wheel is a heavily built floor stand unit that can handle smoothing compound curves into mild steel and aluminum sheet metal for restoration or bodywork on autos, planes, cycles and much more. This machine has an 18-gauge mild steel capacity and has an ample 28 throat depth. The EW-28 English wheel comes standard with an 8 X 2 upper roll and includes six lower anvil rolls with varying crowns. The radius included for the six lower rolls are 2, 3, 4, 6, 8, and 12. Like other Baileigh English wheels, the machine comes intact with only minor assembly required (no welding required). The frame members are constructed of heavy walled square tubing that is electro welded to a truss system offering little flex at maximum capacity. Specifications: Capacity (Mild Steel): 18 ga Throat Depth: 28 Shipping Dimensions(L/W/H): 36/34/15 Shipping Weight: 191 lbs P/N 13-09001 ...................$679.95
Baileighs quality English Wheels have a generous 40 throat depth, and ship complete with five bottom anvils and one 7 upper wheel. It has a rugged electro welded frame and stand for ease of use and years of quality shaping and forming metal. The EW-40 English wheel has an 18 gauge mild steel capacity and a 13 gauge aluminum capacity. Like all Baileigh metal forming machines the EW-40 is a quality machine for a reasonable price. This machine is in stock for quick deliveries. Specifications: Capacity (Mild Steel): 18 ga Throat Depth: 40 Shipping Dimensions(L/W/H): 72/36/15 Shipping Weight: 388 lbs P/N 13-09003 ................$1,459.00
715
This coping machine can be vertically mounted in a drill press, or for larger pieces it can be horizontally mounted on a weld bench and powered by a portable drill. This hole saw tube notcher is made of thick 3/8 inch aluminum with a heavy bronze bushing that is replaceable if ever need be. The spindle is made of a hardened shaft for longevity and less vibration. This coping machine can notch at angles up to 45 degrees in less than 30 seconds and has a capacity of up to 2 round tube. Specifications: Notch Capacity (OD): 2 Spindle Size: 1/2 Spindle Adapter: 1/2 5/8 Shipping Size (L/W/H): 12 / 7 / 5 Shipping Weight: 10 lbs P/N 13-08978 ...................$195.00
Baileighs MSS-16 sheet metal shrinker stretcher has a heavy cast iron frame with a deep 8 throat. It comes standard with two sets of jaws, one for shrinking and one for stretching. This is a manually operated machine that has a heavy engagement lever that allows perfect control of the function at hand. This sheet metal shrinker stretcher has a mild steel capacity of 16 gauge and an aluminum capacity of 14 gauge. No other sheet metal stretcher shrinker on the market has such a generous throat depth with a heavy maximum capacity for such a good price. Specifications: Capacity Mild Steel: 16 ga Capacity Aluminum: 14 ga Throat Depth: 8 P/N 13-08985 ...................$579.95
This is the most revolutionary hole saw pipe notcher on the market and is perfect for chassis, roll cages, and much more. This is the only hole saw tubing notcher that is always centered left to right and up and down. This coping machine is constructed of heavy steel plate to reduce vibration, uses a 1-1/4 Thompson shaft that rides in a sealed needle bearing for longevity of the machine and hole saw. The TN-250 tube notchers vise has a powerful screw with a built in hand wheel that opens and closes the unique six radial clamping jaws. Can notch up to 2-1/2 OD and allows for steep angles as the hole saw can pivot up to 230 degrees making it the most versatile notching machine on the market. This tubing notcher can easily offset in seconds for off center notches and does not require crazy shims or spacers common on inferior models. P/N 13-08981 ...................$579.95
This model is a heavy duty foot operated shrinker stretcher for shrinking or stretching mild steel sheet metal down to 16-gauge (14-gauge aluminum) in thickness. This is the perfect machine for working metal for auto, cycle or airplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity. Our MSS-16F metal shrinker stretcher has a rugged floor stand with foot pedal control to actuate the jaws allowing the hands to be free to properly work the material. An ample 6 throat depth allows for hundreds of applications to be worked on compared to smaller throat depth models. The rugged base has wheels allowing for mobility in any cramped shop environment. This metal stretcher shrinker has quick jaw change over features built in so changing from shrinking metal to stretching metal takes only a couple seconds. This machine comes standard with jaws to stretch metal and shrink metal (note: optional aluminum jaws are available). Specifications: Capacity Mild Steel: 16 ga Throat Depth: 6 Weight: 78 lbs P/N 13-08986 ................$1,068.00
This tubing notcher can notch from 1/2 to 3 tube and 1/2 to 2-1/2 Schedule 40 Pipe in materials such as aluminum, mild steel, chromoly, and stainless steel. The tube notchers vise has a quick release so different notch angles can be set up in a second or two and locked in with a solid taper lock. Can notch up to 60 degrees as standard, but with extended hole saws and the right size OD, notches up to 75 degrees can be attained. The vise is a self centering that is on an acme screw for quick tightening and releasing of the material. An offset adjustment is standard for those jobs where more strength is needed like on some hand railing or chassis frame applications. The drive carriage on the TN-300 pipe notcher houses an industrial grade motor tied to a direct drive gear reducer that turns the hole saw with ease, even at full capacity. This tube notchers carriage rides on a solid V-block roller assembly that is coupled to a large drive wheel for pushing the hole saw into the material with limited vibration and ease. This simple unique design on this tube notcher makes notching tube and pipe a breeze. P/N 13-08983 ................$2,429.95
The Baileigh Industrial PH-19 power hammer is the little brother to the MH-19 Power Hammer . The PH-19 can do many of the same functions as the MH-19, shrink, stretch, dome, edge turn, bead, offset, but at a price that fits any budget. The PH-19 also accepts all readily available MH-19 tooling. Specifications: Capacity Mild Steel: 16 ga Capacity Aluminum: 12 ga Throat Depth: 19 Tooling Height Adjustment: 5 Speed: 0 - 1700 beats/minute Power Requirement: 120V P/N 12-02646 ................$8,707.00
Baileighs MSS-18 sheet metal shrinker stretcher has one complete shrinker and one complete stretcher both in their own cast iron housings. The heavy casting assures a quality function at full capacity, which is 18-gauge in mild steel and 16-gauge in aluminum. Both units are foot operated and come with a heavy steel stand as standard. Specifications: Capacity Mild Steel: 18 ga Capacity Aluminum: 16 ga Minimum Forming Diameter: 4.5 Stand: Included P/N 13-08984 ...................$485.00
MH-19 power hammer is the most revolutionary metal forming machine on the market. In summary you can achieve stretching, shrinking, planishing, and doming with critical adjustments on the fly while in operation. This is the ultimate metal shaping and forming power hammer on the market. No other machine is as versatile as the MH-19. The MH-19 includes the following tooling to get you up and running quickly at no extra charge: (1) set of thumbnail shrink dies, (1) flat top die, and (1) Lower planishing die. Specifications: Capacity Mid Steel: 16 ga Capacity Aluminum: 12 ga Throat Depth: 19 Length of Stroke: .177 - .550 (adjustable) Tooling Height Adjustment: 2 Speed (variable): 0 - 1500 beats/minute Power Requirement: 220v / 1 phase Shipping Dimensions: (L/W/H)60/60/84 Shipping Weight: 1600 lbs P/N 12-02645 ..............$20,879.00
716
CM WP
MT-250
MT-EXP Digital, non-contact infared thermometers are used for hundreds of practical applications and are essential tools for professional automotive and aviation technicians. Infared Thermometers (IRTs) are great automotive and race tuning diagnostic tools-and are great for countless diagnostic tasks. Check track surface temperatures, tire temps, brake rotors, header and exhaust temps, air intake temp, heating and A/C vents. Model Description Part No. Price -67F - 482F (-55C - 250C) measurement range MT-250 5:1 distance to sight (D:S) ratio. 12-01656 $39.75 Super compact size: 2.94 x 1.65 x 0.8 Temp Range: -58F - 752F (-50C MT-EXP 12-01657 $59.50 400C); Laser Target, Pistol Grip Temp Range: -27F - 230F; Distance to Spot Ratio (D:S) 1:1, MT-100 Accuracy +/-2F, Response Time: 12-01994 $26.35 1 Second, Dimensions: .75 x 3.25, Battery Type 2 LR44
ME HA AP LG EP CS IN EL AV TO PS BV
DEICING CARTS
-Improve Starting Performance. -Easier Removal & Installation of Battery. -May prolong life of battery and starter. -Less expensive to modify existing box than to replace. -Compatible with our famous Low Loss Cable Kits! -Eliminate extra connection on outside of the battery box. -Do away with the troublesome braided negative strap. Experimental ...................P/N 11-02892 .......... $26.25 STCd/PMAd ..................P/N 11-02893 .......... $51.90 The Right Tool for the Job. * Prevents damage to battery posts. * Steel frame, fits battery wing nuts securely. * Insulated to eliminate shorting, sparks or possible explosions. * Foam grip handle eliminates slipping. * Great gift for pilot or mechanic. P/N 12-16200 .......... $10.85 Nicholson Bi-Metaloy hacksaw blades last twice as long as high-speed steel and 10 times longer than carbon steel. Can operate 20%-50% faster. Practically unbreakable.
Features Jumbo Display with four digit LCD Dual Channel K type ports T1/T2 Accepts K/J thermocouples Fast response Hi/Lo temperature alarm Temperarture hold Min./Max./Avg. Clock setting Relative temperature mode Low Battery and Overload indicators Auto Power off Protective rubber housing Instrument displays in F/C/Kelvin- absolute temperature P/N 12-01893 ...........................$109.95
Diagnose problems faster and more easily with the Raytek MiniTemp MT6 infrared (IR) thermometer. Portable IR thermometers have become an indispensable tool for automotive troubleshooting and diagnosis. Spot cooling system faults, identify engine misfires, check for proper A/C performance, verify catalytic converter operation and much more. The laser point sighting on the MT6 unit helps to direct measurements toward the target, and the large backlit display shows both the current and maximum readings simultaneously. With a protective boot for added durability, award winning ergonomic design and Raytek quality and accuracy, the MT6 model is the perfect introduction to infrared temperature measurements in automotive diagnostics. P/N 12-03153 ..........$89.00
GENERAL RECOMMENDATIONS FOR BLADE SELECTION 14 TOOTH For cutting heavy cross section and for soft materials where
maximum chip clearance is needed. P/N 12-19514 .......... $1.94 18 TOOTH For general shop use, where blade is used on several jobs. P/N 12-19518 .......... $2.45 24 TOOTH For cross sections of 1/16 to 1/4, such as pipe, angles, small drill rod. P/N 12-19524 .......... $2.45 32 TOOTH For cutting stock up to 1/16 thick, such as 4130 tubing, sheet metal, BX. P/N 12-19532 .......... $2.45
Features of the IR Long Range Professional Thermometer include a bright, built-in dual laser which provides easy aiming and defines target area, amber back-light LCD display, programmable HI and LOW audible temperature alarms, and high intensity white LED flashlight. Uses 2 x AAA batteries (incl) to provide 180 hours of use. Weight and Dimensions: 16 ounces (with batteries,magnets); 8 x 8 x 2.8 inches. Temp Range: -76 to 1832F. P/N 12-03152 ........$259.00
717
ENGINE TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Valve Wobble Test Fixture for parallel valve Lycoming engines is used to comply with LycomingSB388a. Quality made of aluminum and alloy steel, it is easy to use with no set screws or feeler gauges required. Allows direct reading of wobble from dial indicator. Note: Will work on a angle valve engine. Fixture without indicator P/N 12-21500 .........$137.95 Fixture with indicator P/N 12-21505 .........$174.95
This handy tool fits most Bendix magnetos and prevents damage to distributor gear teeth brought about by accidental turning of the engine during magneto installation. Use for E gap or engine timing. Body taper locks into timing window. Polyurethane rubber throughout. P/N 12-21535............. $9.95
This tool facilitates the proper installation of contact springs on Bendix magnetos. The Oring locator ring assures proper location of the tool in the contact tower. Features knurled body grip and ball plunger grip. Made of alloy steel P/N 12-21510 ...........$84.75
This tool is used to align timing numbers and marks to the crankcase parting line on Lycoming engines. It permits timing from the marks on the aft side of the flywheel. A spring clip holds the tool to the flywheel. P/N 12-21540........... $44.75
This tool is used to compress valve springs during valve removal and installation. It is ergonomically designed for shop and field use and comes with special pivot pin. Features alloy steel construction with nickel plating. P/N 12-00202 ...........$72.75
This tool is used to align timing numbers and marks to the crankcase parting line on the Continental O200 engine. It is held to the propeller flange with magnets, and eliminates the need for all other timing angle devices and TDC indicators. Quality made from delrin and tool steel. Greatly simplifies the timing of new magnetos and periodic timing checks. P/N 12-21545........... $39.90
This tool greatly reduces the time required to adjust valves and improves the accuracy of the adjusting operation. Used on Lycoming O 235 and O 290 series engines. Quality constructed of alloy and toolsteel. P/N 12-21550 .........$159.95
The Sidewinder Speedwrench specialty tool was developed to counter the frustrations of using standard socket wrenches especially in applications where excessive repetitions are required to install or remove long bolts; or where there is not enough resistance involved to allow the ratchet to function; or where there is not enough working space for efficient use of the standard ratchet wrench. The sidewinder can cut work time in half for professional mechanics and aircraft builders. Now being used by major racing teams, the Sidewinder is a revolutionary addition to every tool box. 1/4 ......................P/N 12-21109 .......... $32.50 3/8 ......................P/N 12-21100 .......... $32.50 1/2 ......................P/N 12-21110 .......... $32.50
Our spark plug service kit includes the Precision Gap gapping tool which is easy to use, features fine thread adjuster and ball pressure tips, and works on all massive electrode plugs. Also includes the 18mm Thread Cleanout Tool with spring loaded jaws which offer maximum thread penetration & control carbon buildup in threads. Completing the Kit is a doubleend Gap Plug Gauge which features an aluminum handle and is easy to use. Kit comes complete with durable birchwood storage case. P/N 12-21525 ...........$94.50
This inexpensive engine overhaul stand is ideal for actual overhaul and for storage of engines. Constructed of heavy duty steel, it features three legs which allow it to sit level on uneven floors and comes complete with an adapter spacer block. The stand is 24 tall with made for user installed casters and comes predrilled for Continental A65 through O520 series engines and Lycoming 65 through O720 engines. A quality engine stand at an affordable price. P/N 12-21555..........$218.00
This quality made alloy steel tool facilitates the proper staking of throttle shaft butterfly screws and eliminates the possibility of damaging the carburetor during staking. The tool can easily be operated by one person on the bench without chisels, special fixturing or hammers. All wear components are easily replaceable for long service life. P/N 12-21528 ...$130.95/ea.
The engine stand kit has all of the components to construct an engine stand. Beginning at the top; the engine stand kit includes (1)The top plate. Designed to bolt down the engine flange to the stand. (2) Three legs that are pre-cut to the proper angle. (3)Three spreader bars to hold the base of the stand from spreading apart. (4) Three feet to stabilize the base and allow installation of casters. The kit is ready to weld. 24 tall when finished.. P/N 12-01364 .......................$164.95
This Bendix Mag Lock works on S4 and S6 and other Bendix Mags. To use simple place a cotter pin loosely into lower plunger hole. Screw sleeve into magneto case. Align red slot in plunger parallel to mag tooth gear. Remove cotter pin to engage gear tooth. Dimension: 2-3/4" x 1/2" x 3/4" P/N 12-02243 ............................... $53.75
Aluminum CNC tool manufactured in Alaska for simple and perfect magneto timing. Simply position engine on #1 TDC compression stroke. Lube grommets. Put this tool on the top two propeller nuts and sight down top case halves to see exact mag timing. Now theres no need for propeller protractor cones! P/N 12-02817 ............................... $39.95
718
TOOLS
LYCOMING BAFFLE SPRING COMPRESSOR
Our top quality Lycoming Baffle Spring Compressor speeds up the removal & installation of cylinder baffle springs. It eliminates the danger of broken or bent cylinder fins caused by use of screwdrivers and punches. This tool is easy to use and features 2 pivot locations for parallel and angle valve cylinders. P/N 12-30200 .................... $64.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This unit will work on Continental 65 thru 0300, and some 0-470s. Lycoming 0320 & 0360, and most any cylinder with a vertical valve constructed head. It is extremely simple to use. Place Spring Compressor in drill press, and a length of wood in cylinder (to keep valve seated). Depress and remove valve stem clips, and spring. Removes valves in a minute. P/N 12-02072 ........................... $51.75
41-PC. LINK 3/8 DRIVE SYSTEM SET - The revolutionary 3/8 Drive LINK System tools are forged from solid steel, with a distinctive chrome finish. The set includes: [1] Universal Joint, [1] Unique UniDriverTM Drive, [1] LINK Automatic-Locking Ratchet, [2] ExtendorsTM (2 and 6-inch), [2] Spark Plug Sockets (5/8 and 13/16-inch), [9] SAE 6-Point Sockets (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, and 13/16-inch), [11] Metric 6 Point Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, and 18-mm), [5] Socket Mounted Hex Bits (3/16, 5/16, and 3/8-inch, and 6 and 10-mm), [5] Socket Mounted Torx or Star Bits (T- 25, T-30, T40, T45, and T-50), [4] Socket Mounted Screwdriver Bits (5-mm slotted, 9/3 slotted, #1 Phillips and #2 Phillips), and a Case. P/N 12-00807 ...... $148.95
Similar to Lycoming Gauge ST23, this tappet gauge is Rockwell hardened to 48-52 and precision ground to .028 and .080. This gauge is a must for professional aircraft mechanics. P/N 12-00918............. $42.75
When substantial quantities of material have to be removed from the exhaust port, it may be necessary to also remove the island around the exhaust stud area. The ear island removal tool and pilot can be used to accomplish this without the use of power tools. P/N 12-17608....................... $103.95
41-PC. LINK 1/4 DRIVE SYSTEM SET - LINK extensions and sockets will not pull apart until you unlock them. A small pull on the locking device lets the socket or extension fall free. The new 1/4 Drive Quick- Lock Set comes with 12 pt. sockets in a new custom-fitted carrying case that floats and contains storage space. The set includes the following 6 Link-Lock Drive Tools: [1] Universal joint, [1] All-metal UniDriver [1] 36-tooth Slide Button Quick Release Positive Locking Ratchet, [3] ExtendorTM Extensions (1.5, 3, 6-inch); 16 12-point Sockets: [8] SAE (5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, and 3/8 inch), and [8] Metric (4, 5, 6, 7, 8, 9, 10, 11 mm); 19 dingle piece machined steel socket bits: [6] Torx (T-8, T-10, T-15, T-20, T-25, T-27), [9] Hex (5/32, 3/16, 7/32, and 1/4 inch, 3, 4, 5, 6, and 7mm), [4] Screwdriver (#0 and #1 Phillips, 5.5 and 6.5 mm slotted); and a customfitted Case with storage space. ...................P/N 12-02840 ........$125.95 LINK TOOLS PALM WRENCH & SPEEDER - LINK
extensions and sockets will not pull apart until you unlock them. A small pull on the locking device lets the socket or extension fall free. The locking device is similar to those found on air hose co plings, but is a lot easier to lock and unlock. Hand spin, then attach your ratchet to torque down. Not with old fashioned ball bearings, but a space age case-hardened nickel plated steel pin. Or, leave the Palm Wrench on your ratchet and use it as a handy spinner! Exceeds 130% of ANSI standards. 2 Palm Wrench/Speeder 3/8-in.Drive ........... P/N 12-00808 ........$14.75 1-1/2 Palm Wrench/Speeder 1/4 Drive ........ P/N 12-00809 ........$13.75
BOLT HOLE BULLET - Every tool box should have a set. Simply tap bullet
into bolt hole requiring alignment, and tap bullet on through with proper AN Bolt Set of 5 (1/4, 5/16, 3/8 7/16 and 1/2inch) P/N 12-02093 ........................... $18.50
Quickly Flushes Out Old Grease and Repacks Bearings with Less Mess. The Handy Packer works on bearings up to 3 1/2 O.D. The grease stays in the tool cavity, not on your hands. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. P/N 12-02578............ $28.95
LINK 1/4 DR. LOCKING ELECTRIC-TOOL ADAPTER - For use with your battery-operated electric drill or
screwdriver to always get secure locking and quick speed on your sockets and attachments. One end goes into the chuck of your power tool and the other clicks into a socket, socket-mounted accessory, or other LINK drive tool with the same Quick-Lock technology that gives you Hand-To-Work locking. P/N 12-00933 ...........$12.95
719
ENGINE TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Precise Gap is a simple tool to gap two-, three- or four electrode 18 mm sparkplugs. Only 2 overall - comfortably handheld. Precision made of stainless steel. T handle adjusters move the ground electrodes closer to the center electrode until wire feeler identifies proper gap. Adjusters have fine thread with ball tips for precise movement. Dont buy an inferior imitation at a higher price! P/N 12-11600 .......... $19.85
A & P mechanics will find this S4 outer bearing race removal tool to be very effective and well priced. Hemispheres held together by the O ring are inserted together behind the bearing race. The pilot is then inserted to expand and lock the halves & push out the race. Youll like its simplicity and ease of use. P/N 12-17601 ................ $92.75 The S4 magneto drive end inner race removal tool works in conjunction with a standard bearing puller. The split gripper ring fits behind and around the race and is captured in the puller ring by 2 opposing set screws. A groove on the puller ring provides the point of attachment for the puller arms. P/N 12-17602............ $127.95 The S4 magneto seal installation, inner and outer race installation tool is three tools in one and is proportioned in such a way that it is easily accommodated by most small bench arbor presses. P/N 12-17603 ............. $89.75
Many customers have indicated that they have had difficulty obtaining setting wires for gaging the plug gap. We now provide a handy tool at reasonable cost. No need to buy extra gauge sizes that you dont need. Furnished with protective end caps. P/N 12-17100............. $10.90
In servicing spark plugs, a common problem is carbon accumulation in the jug threads. Cleaning these threads regularly can save big money by preventing thread damage and the need to pull the jug and install thread inserts. This specially designed tool works very well to limit this problem. It provides maximum depth penetration and its unique spring action assures that there will be no enlargement of the existing thread pitch diameter. P/N 12-17200 .......... $36.85
TIMING JUMPERS
The timing jumpers are easily used for timing magnetos without removing the breaker box cover. Simply remove the P lead and replace with timing jumper. Then hook up timing light leads. These handy devices have proven to be a real time saver and, in some cases, an outright necessity. SOLD IN PAIRS Bendix S4 .......... P/N 12-17700....... $42.50/pr. Bendix D2200, D3000, D3200, S6 P/N 12-17710....... $42.50/pr.
The compass screwdriver is a great little tool that is totally non-magnetic, but also overcomes the shortcomings of solid brass or aluminum tools. This tool has a nice hex aluminum handle and a stainless steel driver insert. No need to worry about damaging the tip on a frozen compensator screw, and you can also remove the cover plate screws with the same tool P/N 12-17300 ............ $9.50 The fast easy way to clean dirt, grease, grime, salt, mud, and more! Can be used with a variety of solvents. An essential tool for farmers, truckers, contractors, shops, and garages. Includes 4 foot solvent suction hose with builtin solution strainer. Lightweight and easy to handle. Recommended air pressure: 60 PSI. Air consumption: 3 CFM @ 60 PSI. Specifications: Air inlet: 1/4''-18 NPT, Overall dimensions: 3" L x 1-1/16" W x 15" H P/N 12-02402 ........................$21.65
Determines condition of excess bearing clearance and allows for precise adjustment of new bearings to prevent over or under preload. Available with or without dial indicator. Choice of 3/8-16 or 3/8- 24 threaded shaft fittings. Kit Description Setting Gauge & Ind. Setting Gauge & Ind. Setting Gauge & Ind. Setting Gauge, No Ind. Setting Gauge, No Ind. Setting Gauge, No Ind. Thread 3/8-16 3/8-24 Both 3/8-16 3/8-24 Both Part No. 12-17801 12-17802 12-17803 12-17901 12-17902 12-17903 Price $84.85 $150.95 $169.85 $94.75 $69.85 $108.50
In many instances, simple tire changing, bearing packing, etc., can be a real problem unless the wheel can be lifted in a safe, secure manner. The strut lift shown accomplishes this easily. A specially designed lift pad securely captures the strut elbow or gear leg. The compact jack can be stored in your toolbox. P/N 12-18000 ............ $126.95
Tired of messy oil filter changes? Tempest oil drain tool with a twist of the knob drills a hole in the filter and allows the oil to drain out of the filter into your container. No mess, easy to do and inexpensive. Tempest improved the popular AA473 Oil Filter Drain Tool by redesigning the swivel fitting to a smaller, more compact design. The new fitting also allows for easier use of the tool because of its true swivel characteristics. If you want to upgrade your previously purchased AA473 Oil Filter Drain Tool you can purchase the fitting individually. Can only be used on Tempest Oil Filters. Oil Drain Tool ...................................P/N 12-02248 ..................... $23.50 Replacement fitting...........................P/N 12-02577 ....................... $3.95
The throttle shaft bushing removal tool is very competitively priced and will help you avoid a jury-rigged operation that could damage an expensive carburetor body. Now there is no reason not to have one. They are available and affordable. P/N 12-17400 ................... $149.50
Get a handle on those springs! The C shaped tip fit the bend in spring end and wont slip. Can be used to install and remove springs on anything! P/N 12-16945 ....................... $11.90
SPRING TOOL
720
ENGINE TOOLS
The ATS Piston Ring Compressor features a quick-change design to speed up piston ring installation. It includes the famous Hastings Ring-O-Matic pliers and bands that operate in all positions: not just vertically or horizontally. The pliers incorporate a precision locking action for exact holding and quick release. The complete kit includes the Ring-O-Matic pliers and one of each of the following size bands: 3-7/8 to 4-1/8, 4-1/8 to 4-1/2, 4-1/2 to 4-3/4, 4-3/4 to 5, 5 to 5-1/4, & 5-1/4 to 5-3/4
Description Kit Compressor Pliers Piston Ring Compressor Band 3-7/8"TO 4-1/8" Piston Ring Compressor Band 4-1/8"TO 4-1/2" Piston Ring Compressor Band 4-1/2"TO 4-3/4" Piston Ring Compressor Band 4-3/4"TO 5" Piston Ring Compressor Band 5"TO 5-1/4" Piston Ring Compressor Band 5-1/4"TO 5-3/4" Part No. 12-03154 12-03155 12-03156 12-03157 12-03158 12-03159 12-03160 12-03161 Price $149.95 $29.95 $17.95 $17.95 $19.95 $19.95 $22.65 $25.95
Convenient Gap Gauge for all Champion and Tempest massive electrode spark plugs. Slider design keep gauge wires stowed away when not in use. Retractable slider design Includes wires for .015, .019, .018, and .022 Works with all Champion and Tempest Massive Electrode Spark Plugs Replacement Wire Gauges are available. 1lbs shipping weight. P/N 12-01692............................ $13.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The most efficient, versatile and dependable tool of its kind on the market. Designed to operate both vertically and horizontally. Fine-tooth ratcheting lock permits bands to be contracted in extremely small increments. Positive lock insures a free hand. Eliminates broken rings during installation. Set includes compressor pliers and the two bands (1123, 1125). Engine Application Cont. A-65, C-85, C-90, 0-200, 0-300 Cont. E-225, IO-470
A low-cost efficent gap setting tool for closing gaps on massive-electrode Aviation Spark Plugs. Great design allows it to clamp on to your workbench for easy gapping. Features Manufacturued from 4160 Tool Grade Steel CNC Machined surfaces for exact alignment Includes ATS450 Feeler Gauge Clamps to workbench for easy one-handed operation Compatible with all Champion, and AutoLite Massive Electrode Spark Plugs 2lbs shipping weight. P/N 12-01691 .......................$79.95
weight.
Chaser cleans threads in spark plug hole of dirt, carbon build-up, and metal particles. Double ended for both 14mm and 18mm threads. Neoprene band on hex drive holds tool securely in any 13/16 deep-well spark plug socket. 1lbs shipping P/N 12-01683 .............................. $8.75
Set ...................................................P/N 12-10900 .......... $79.00 Pliers................................................P/N 1114 ................. $39.75 Individual band # 1123 for 3-7/8 .....P/N 1123 ................. $16.75 Individual Band # 1125 for 4-3/8 .....P/N 1125 ................. $17.75
A portable rotary filer. Sizes any make, type, size of ring with machine shop accuracy. Turning crank files both ends at the same time. P/N 12-11000 .....$82.25 Replacement Cutter File P/N 12-11100 .....$25.00
The new Spark Plug Socket features a thin-walled design to get into to the tightest confines. Magnetic interior guarantees that you wont accidentally drop the plug during installation or removal. Works with all Champion and Tempest Aviation Spark Plugs. Works with all Champion and Tempest Aviation massive electrode Spark Plugs Thin-Walled design to get to the tightly spaced plugs. Magnetic interior holds spark plugs and keeps them from falling out 7/8 Socket 3/8 Drive 3-1/2 Overall Length Made of Chrome Vanadium Steel 1lbs shipping weight. P/N 12-01693............................ $27.50 Chrome Socket, Deep Length, SAE. Drive Size: 3/8. Number of Points: 6. Size: 7/8. Overall Length 2-3/4. P/N 12-00710............................ $20.50
Cleans any size plug without changing grommet. Has 2-way valve (blast or air) and comes complete with abrasive powder. Ready to use. P/N 12-01684............................ $25.80
The Aircraft Spark Plug Maintenance Kit includes an aircraft spark plug tray, airpowered spark plug cleaner, feeler gauge, spark plug gap setting tool, aircraft spark plug socket, a set of 8 spark plug gaskets and a bottle of spark plug thread lubricant and anti-seize compound. P/N 12-02250 ...............................$115.95
Sure-Gap is designed for use on all massive electrode aircraft spark plugs. Saves time and money, eliminates guessing of plug gap, prolongs plug life and ensures peak performance. 18mm. 1lbs shipping weight. P/N 12-01682.............................. $9.95
721
This oil filter drain tool permits draining spinon oil filter prior to removal from the engine. Just clamp on to rear of filter with cutter, punch small air bleed at the top of the housing with anice pick, remove cutter and oil will drain freely in-can or hose-extended funnel. P/N 08-04200 .......... $43.60
High-impact red plastic case contains four sets of accurate, retractable go and no go wire gauges: 2 sets .015-.019 (.016 Nom.) 2 sets .018-.022 (.019 Nom.) Length: 3-1/2. Wt. 1-1/4 oz P/N 12-00797..................$20.85
Designed exclusively for adjusting fine wire electrode sparkplug gap. Two sizes of slots fit all platinum or iridium electrodes for quick adjustment. Red plastic case. P/N 12-00798 ..................... $35.85 Reduce time to remove and install sparkplug ignition leads. Permit shortarc turning due to 12-point grip head. CT911 3/4 T Handle Box Wrench ...... P/N12-00799................ $96.75 CT912 7/8 T Handle Box Wrench ...... P/N12-00801................ $92.95 3/4 & 7/8 Open End Box .................... P/N12-00802.............. $115.95
Complete with accessories, gauges and instructions for use. A precision gap setting tool for all massive electrode sparkplugs. Permits simultaneous adjustment of 2 opposite prongs without removing the spacing gauge. P/N 12-15500 ........ $349.50
Steel tray holds up to 12 plugs. Speeds handling of used or new plugs. Holes numbered to correspond with engine cylinders. Protects against shielding barrel contamination. Dims: 5H x 8L x 3.5W. Wt. 1 lb. (12 plug tray) ........................ P/N 12-00795 ................................. $55.75 (18 plug tray) ........................ P/N 12-00162 ............................... $108.95 The SPCT100 Spark Plug Cleaner & Tester Unit is used check spark plugs under pressure that is intended to closely simulate the firing conditions inside a cylinder. The cleaner section - consisting of a sand-blaster and air cleaner - will effectively remove carbon deposit from spark plugs. Features: Operating voltage: AC115V Singlephase 50/60Hz (The SPCT102 operates at 220V) Recommended air pressure: 100 to 140 psi (7 to 10kg/cm2 ) Cleaner section abrasive capacity (60# grain): 2 lbs (900g) High-voltage output when spark testing : 15,000V Dimensions: 19.3 (49cm) x 11 (28cm) x 10.4 (26cm) Weight: 20.5 lbs (9.3kg) Accessories included: 12mm, 14mm and 18mm spark plug adapters (2pcs each); 12mm, 14mm and 18mm cleaner gaskets (1 each); Adapter case (1pcs); Aviation Massive Electrode adapter plug (1pcs), Abrasive 2 lbs (900g). 110V .......................................... P/N 12-01629 ......................... $438.00 220V .......................................... P/N 12-01637 ......................... $489.00
The new Screen Clean tool works great for field cleaning of spark plugs. It is non-abrasive and can be used for several cleanings. Simple to usejust work the bi-fold edge through the gap with several strokes before setting the gap. Actually removes deposits blasting cannot reach. P/N 12-15610 .....................$5.90 This unique spark plug tray is quality made of PVC plastic. Each holding position has 18 mm thread so that plugs screw in for positive holding. This tray permits simultaneous inspection of either the electrode or barrel end of plugs, protects plugs from damage, and can be stored in any position. Optional carrying strap attaches to ends. P/N 12-30185...........$36.85 Holds 12 spark plugs each hole stamped with cylinder number also marked top and bottom so each plug can be identified easily, no mixups. Plugs can be serviced and returned back to where they were removed. a must for aircraft mechanics. Made from 18 gauge steel. Blue powder coat finish. Dimensions: W=4.0, L=8.0, H=2.6. P/N 12-00974 ...............$27.50
Champion now makes it easier than ever to clean heavily lead-fouled spark plugs with this new, improved Vibrator/Cleaner. Each unit is shipped with all accessories required for cleaning fine-wire and 2-prong massive electrode aviation spark plugs. This unit features quick-change cleaning head assemblies, easy and inexpensive replacement of single cutter blades, improved heavy duty top-mounted switch and improved vibrator motor for faster cleaning and maximum durability. Model 2600A ................. P/N 12-15600 ........... $1,066.00
18 plug holder is made out of steel. Powder coated federal yellow. P/N 13-11617 ...........$34.95
For use in CT-475AV Dry Abrasive Cleaner/Tester. Contains 1 full charge (15oz.). Note: This main item no longer ships with a tip unless it is ordered separately. P/N 91893. ................$8.95
This handy spark plug gapping tool is made from heat treated stainless steel for long life. To adjust the spark plug gap, simply place the tool into plug with ground electrode between the forks, push up on the tool bending the ground electrode closer to the center electrode setting nominal gap of . 016. P/N 12-21352 ............ $5.75
Chaser cleans threads in spark plug hole of dirt, carbon build-up, and metal particles. Double ended for both 14mm and 18mm threads. Neoprene band on hex drive holds tool securely in any 13/16 deep-well spark plug socket. P/N 15-06005 ............ $7.95
Tempest has developed an easy-to-use tester that makes it very efficient for IA/APs to test the resistance in all aviation spark plugs. The IA/AP simply places the spark plug, barrel side down over the contact post and touches the other lead end to the firing end of the center electrode. If the light is green, the spark plug resistance is below 4k (thousand ohms). If both the green and red lights are on, then the plug is between 4 - 5k. This is acceptable for serviceable plugs. If the red light is on alone, this indicates a resistance value in excess of 5k and the plug must be discarded and replaced. P/N 08-07462 .............. $124.50
722
This unit has the capacity of both P/N AFC-470 & 12-21395. It also uses the same replacement blade as the 12-21395. Anodized Red for corrosion resistance. Base can be clamped in a bench vise if desired. s black anodized. P/N 12-01048 .......... $59.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Champion CT-482 spark plug erosion gauge provides an easy, accurate method of determining whether your plugs have reached their maximum wear limit. Simply recap the used plug to .016 nominal, then attempt to insert the electrode assembly through the chamfered hole in the gauge, as shown. Penetration of the hole by the electrode assembly indicates the plug has exceeded its recommended wear limits and should be replaced. The CT-482 is calibrated to reject plugs after their electrodes have eroded to at least one-half their original thickness. Although aviation spark plugs will continue to fire past this wear point, the rate of electrode erosion will increase as a result of non-parallel gaps and reduced sparking area. This leads to intermittent misfire, increased ignition system wear, and possibly costly unscheduled maintenance. P/N 12-00791 ............................$6.75
Some aircraft applications create an environment that does not allow adequate clearance to get a torque wrench or even an open-end wrench around the install nut on oil filters. Even though Tempest has recently introduced the Dash II filter, which is the shortest oil filter on the market, the clearance is still not enough on some applications, such as Beech Barons and Bonanzas. To eliminate this problem Tempest producs the AA474 oil filter wrench extension. Features: Chrome-plated steel provides a high quality tool.Easy to use torque conversation label on back of tool. P/N 10-03929 ..........$33.85 This universal cutter from Tempest is easy to use and is a great addition to any toolbox. Its made from high quality aircraft aluminum, making it lightweight and very durable. Works on all aircraft spin-on oil filters. Adapter pin easily removed for male filters. P/N 12-01392 ............. $89.90 Tempest Oil Can Cutter Blades. ..............P/N 12-01393 ............... $9.75 Every A&P knows the importance of cutting every single oil filter open after an oil change. The problem up to now was oil filters were difficult to open and the tools to open them were expensive. This is no longer the case with the Airwolf AFC-470 oil filter cutter. The AFC-470 is the easiest and quickest way to determine the current health of your engine. The Airwolf AFC470 oil filter cutter is constructed out of a solid 6 billet of super strong 6061-T6 aluminum, hard anodized to resist scratches and wear. Stainless steel rollers allow the oil filter to spin effortlessly during cutting. And finally, our specially designed razor sharp cutter wheel hardened to 60 Rockwell, will make quick work of opening any oil filter. This filter is designed to last a lifetime. Fits new style oil filters. All Champion/Tempest/Kelly Filters ... P/N 12-00789-1................. $87.95 Rotax Filters ....................................... P/N 12-02295 .................... $88.75 Large Fram Filters .............................. P/N 08-07191 .................. $129.50 Replacement Cutting Wheel............... P/N 13-03958 .................... $14.90
Anyone that cleans a lot of spark plugs knows that a spark plug vibrator cleaner is the only way to go to break up and clean out stubborn lead deposits. A spark plug abrasive cleaner is great for the finish cleaning, but it just wont take care of the lead deposits found down around the plug porcelain. Aircraft Spruce now offers an inexpensive way to professionally clean spark plugs. This 115V vibrator cleaner is small, light weight, easy to use. It is great for the pilot or mechanic that wants to carry one along just in case. 90 day guarantee. P/N 12-21355 ......... $29.85/ea. Extra Cutter Blades .........P/N 12-01147 ........... $4.95/ea. This economical spark plug cleaner cleans any size spark plug without changing the grommet. Features a 2-way valve and comes complete with abrasive powder and bag. Cleaning Kit-2.2 lbs. ..............P/N 12-00786 ........ $24.50 Extra Powder-1.8 lbs. ............P/N 12-00787 .......... $3.25 Extra Bag-0.06 lbs. ................P/N 12-00788 .......... $3.35
The CT- 709 tool, designed by a professional aircraft mechanic makes the job easier. Manufactured from tool quality steel, the wrench features both 3/8 and 1/2 drives, as well as flip over reversibility. For Cessna adapter for 150 Series through 300 Series Aircraft. P/N 12-00792 .........$118.50 Challenger CP102 Oil Filter Wrench Torque Wrench Adapter 1 L P/N 12-01674 ..................$16.85 Challenger CP103 Oil Filter Wrench Torque Wrench Adapter 30 MMS P/N 12-01675 ..................$13.95 Challenger CP102 Oil Filter Wrench Torque Wrench Adapter 1 ST P/N 12-01676 ..................$13.95 12-01676
This tool was designed to eliminate much of the mess that occurs with small handheld oil filter cutting tools. Very simple to operate, it is excellent for individual aircraft owners as well as FBOs and maintenance shops where a lot of filters need to be cut. Simply clamp in a vise, screw on the filter, turn the cutter into the filter and hand crank to open the filter. The rugged construction enables this tool to operate trouble free for years. P/N 12-00122 ........ $107.95 Replacement Cutting Wheel........................P/N 12-01685 ............ $7.50 This aviation oil filter cutter will open any size oil filter canisters for your inspection. To use the tool, place the filter in a vice, attach the tool to the top of the filter, and rotate 4 to 6 turns to open the canister. The cutting wheel will stay sharp for about 50 uses, and is easily replaced when dull. The tool is made from 6061 aluminum with a purple anodized finish. The tool is ready to use on any oil filter with a male or female thread. Oil filter cutter P/N 12-21395 .......... $59.85 Replacement cutting wheel ............P/N 12-21396 ............ $9.50
12-01675
The Oil Easy Wrench is specifically designed to remove the oil filter on any aircraft using the Teledyne Continental IO-520 or IO-550 engine. In fact, it is a universal oil filter wrench that works great on any piston engine airplane! Recommended at the Malibu Mirage Owners and Pilots Association (MMOPA) maintence seminar!!! On IO-520s & IO-550s engines, its the only wrench that can get between the top of the oil filter and the pressure pump and still provide enough leverage to remove the old (usually stuck) oil filter by hand. And because you are able to remove the old filter without any damage, your inspections of the old filter are more accurate, without any contamination from more extreme filter removal methods. P/N 12-01552 ........................... $39.95
Tempests new AA471 provides a low cost, efficient and safe tool that every mechanic will want to put in their tool box. Strong guard and non-retractable blade to secure the media and ensure an accurate cut. P/N 12-01854 ..............................$34.95
723
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
T-554 AUTOLITE SPARK PLUG FEELER GAUGE - Sliding tabs check spark plug gap in decimals of
an inch. w/o magnet P/N 12-00707 ...........$13.95 P/N 12-00712 ...........$29.85
SPARK PLUG DEEP SOCKETS - T-558 1/2 drive ATS VIBRATOR CLEANER PA01 - It will clean heavy deposits in and around the electrodes with absolutely no risk of damage to the plug. 1 lbs (0.5Kg) shipping weight. P/N 12-00714 ...........$32.85
Kit Contains: 1 TP12 cleaner, 1 TP164 extra bag, 1 TP163 extra powder, 1 TP298 Go &No Go wire gauge, 1 TP339 spark plug tray, 1 TP340 gapper P/N 12-02351 ....................$136.95 Kit includes: ATS415 Bench Gapping Tool with Gap Gauge, #12 Spark Plug Cleaner, PA01 Spark Plug Vibrator Cleaner to remove lead deposits, Champion Spark Plug Tray, 10X Inspection Magnifier, 4oz Bottle of Anti-Seize Lubricant, Box of 100 Copper Gaskets, Thread Chaser, The new ATS950 Magnetic Spark Plug Socket, A durable military-style canvas storage bag, and SPCT100 Spark Plug Cleaner Tester Unit that will check plugs under simulated high voltage/ high pressure conditions for spark quality and leakage. 36 lbs (16.5Kg) shipping weight. P/N 12-02410 ....................$659.00
Tom s oil filter cutting tool will allow you to inspect your aircrafts oil filtering material for trapped debris in a quick and easy manner. Oil filter inspection is a critical measure of your engines health and should always be a part of your aircrafts regular maintenance program. Most filter cutters work like a pipe or tubing cutter in that you have to go around and around the filter, adjusting cutter depth with each pass. Although you could do that with this tool, the real beauty of this new product is that the cut can be easily made in one pass. The tool is designed primarily for Lycoming oil filters that have a threaded insert protruding from the end of the filter. A few Lycoming oil filters and most Continental oil filters do not have this insert. For these filters, an adapter insert is supplied with the tool. Toms oil filter cutter may also be used on smaller filters such as found on Rotax or automotive engines. Simply remove the cutter handle and reposition the pivot bolt to the inner hold on the base handle. The adapter insert may be needed on these filters as well. Made in USA. P/N 12-01697.............................$59.95 Accepts both male & female styles of aircraft oil filters, and many automotive sizes. Ball bearing rollers make it easy to turn the filter Effective design helps insure a straight cut (the filter does not try to spiral off the cutter) Heavy duty construction (designed for daily commercial use) Aircraft quality aluminum construction Replaceable hardened steel cutter wheel Contoured knob is easy to turn, even with oily hands Accepts oil filters 3 1/8 to 4 in diameter, which includes most aircraft oil filters such as Champion: CH48103, CH48104, CH48108, CH48109, CH48110 AND CH48111 The cutter may be completely disassembled, and all parts are replaceable. P/N 13-03145 .................. $119.95 Replacement cutter Wheel ................ P/N 13-05737 .................... $15.25
Features: Cuts all Champion, Hartzell, and Tempest 3.7 Dia. oil filters Rugged 6061-T6 aluminum construction Roller bearings provide smooth rolling action Hardened hardware throughout No parts to change Can cut in either direction Made in USA Lifetime Warranty. ................ P/N 12-00923-1.........$88.75 Replacement Cutter Wheel ........................ P/N 12-01689 ..............$4.95
This an cutter incorporates a longer plate that allows cutting filters from 3.7 to 4.7 inches in diameter. Roller bearings provide smooth cutting action. Ideal for cutting racing filters too! Black anodized finish P/N 12-02628 ............$99.00
This patented tool is designed to hold Champion Aerospace brand Aviation oil filter spools, and to allow cutting the paper filter media at each end of the spool without holding the filter spool by hand. Using this tool reduces the risk of cutting ones hands while cutting the filter media as well as reducing the time necessary to accomplish this task. The filter media is rotated in a special holder that is supported by roller bearings. A knife, with a retractable safety cover is brought into position to make a clean cut of the filter media at each end. The filter media can then be removed for inspection.Patented. FMC-2000 Oil Filter Media Cutter..................P/N 12-00925-1 ....$298.00 FMC-2000BL Media Cutter Blades (3 pack)..P/N 12-01688 .........$14.95 FMC-2000BA Base to mount to bench ..........P/N 12-01690 .........$49.50 FMC-2000K Kelly Filter Cutter Adapter .........P/N 12-01686 .........$98.95 FMC-2000T Tempest Filter Cutter Adapter ...P/N 12-01687 .........$98.95
Slips onto the hex of an aircraft oil filter Large diameter knob for a strong grip even with oily hands. Allows many filters to be installed and removed without using a wrench. Works in tight spaces, you do not have to swing a wrench Knob will accept a 3/8 drive ratchet handle to help remove very tight filters (ratchet handle not included) Stainless steel core durability (your ratchet goes into stainless steel, not plastic). Use a torque wrench to accurately tighten a new filter to the proper torque. Handle can be used as a base to support the filter, holding it upright so the oil does not spill out. Color: bright yellow. P/N 13-03146 .......... $42.75
The Model FMC-2010 is a Tool Box version of the original Oil Filter Media Cutter that allows cutting and removing the filter media while reducing the chances if getting cut. The FMC-2010 can be mounted on the top of a toolbox or held in a vice for operation. Black powder coated finish. For Champion 3.7 diameter filters. Tempest and Kelly Aerospace filters are special order. ........................................ P/N 12-02629 ..........$189.00
Make your oil changes less messy. Drain your oil lines and filter before removing the filter. Works with most Lycoming engines and remote filter installations, and some Continentals. When you drain the oil from the engine, you are only emptying the oil sump. Generally quite a bit of oil remains in the filter and oil lines (if you have a remote mounted filter). A remote mounted filter installation can easily hold a quart of oil in the filter and lines after the engine is drained. This oil will come pouring out when the filter is removed, making a mess in the engine compartment. Cleaning up this mess often takes longer than the actual oil change. The Oil Drainer clamps over the center of the oil filter. A hardened steel rod pierces the filter can and allows the oil to be neatly drained into your catch bucket. After the oil is drained, you can remove the filter with much less mess. P/N 13-03147 ..........................$107.95 The 1 hexes of the wrench easily fit Champion oil filters. The hexes are rotated 15 degrees from each other so by turning the wrench over or flipping it end-for-end you can easily find an orientation that allows you to get on the filter, even the tightest engine compartment. Its 6 inch overall length allows you to turn it tight locations, and the shorter length helps prevent over-tightening the filter during installation. P/N 12-01638 ........................... $15.75
Rigidly supports Champion, Hartzell, and Tempest 3.7 dia. aviation filters for cutting. After opening the filter, it keeps the oil inside the cup of the holder, instead of on your vice or shop floor. It holds the filter much more rigidly allowing you to cut the filter much faster while reducing side loads on your cutting tool. ............................................................. P/N 12-00924-1.........$89.00
724
SPECIALTY TOOLS
These Ullman pick-up tools with Powercap offer a unique combination HT-3 of features which make them ideal for work around aircraft. The stainless steel telescoping handle is strong, long, and lightweight, and the comfortable, textured cushion grip keeps handle secure even in wet or oily hands. The head features HT-2 a compact industrial strength magnet for retrieving heavy objects in tight places. The powercap shields magnet side so that the head can be easily guided past ferrous metal objects. Available in 3 conHT-1 venient sizes. HT-1 lifts 1-1/2 lbs, over 2 lbs with POWERCAP telescopes from 6-5/8 to 33-1/4 P/N 12-21385 .......... $10.95 HT-2 lifts 3-1/2 lbs, over 5 lbs with POWERCAP telescopes from 6-5/8 to 33-1/4 P/N 12-21386 .......... $12.95 HT-3 lifts 5 lbs, 10 lbs with POWERCAP telescopes from 6-3/4 to 30-1/4 P/N 12-21387 .......... $18.25
Uni-Mag is a wrist worn magnet that allows craftsmen to keep parts close to hand while working rather than in your pocket, on a ladder, or in your mouth. It holds nuts, bolts, screws, nails, tools, etc. A specially created magnetic field allows parts to lay flat on the face of Uni-Mag rather than upright. Save time and put an end to fumbling for small hardware with Uni-Mag. Comes complete with magnet and wristband. P/N 12-30110 ....................$16.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Super Handy Magnetic Retrieval Tool extends 26 and picks up five pounds. P/N 12-02932 ......................$9.50
CHP4-L HOOK & PICK SET - has picks that are 9.75 long with textured cushion grips. These longer picks are ideal for working in hard to reach awkward areas. P/N 12-00716 .......... $12.25 MSR-3 MEGAMAG SOCKET RACK - has a strong magnet on the front of the racks that keeps 1/4, 3/8 & 1/2 drive sockets together, organized and ready to use. The magnetic force on the back holds the rack loaded with sockets to most flat metal surfaces. P/N 12-00717 ............ $9.50 GMC-2 DUAL PURPOSE TOOL - contains a MegaMag Pickup Tool that lifts 16 lbs. and a 2.25 Inspection Mirror with a metal base that mounts in seconds and brings hidden areas into full view. P/N 12-00718 .......... $20.75
Magnetic flexible lighted pick up tool. Flexible Shaft. Three LED Lights. Magnetic on both ends. Extends from 8 to 25 P/N 12-02919 ....................$15.95
Safely remove metal chips and debris from machinery and work areas using SteelMax Mag-It magnetic pick-up tool. The Mag-it slide action lever quickly demagnetizes the tool, which releases chips for disposal. 10 inch Pick-Up.............P/N 12-01714 ............. $24.75 15 inch Pick-up .............P/N 12-01715 ............. $47.50
Quality made polyurethane rubber plug wont wear out and provides a positive seal in the exhaust pipe. Desiccator housing contains interchangeable desiccator canisters. Desiccant never needs to be removed from canister for drying. Removal flag and cap attach to external end of plug when in use. During storage, flag cap fits on desiccator chamber. Limits internal engine damage caused by corrosion. Fits 2 dia. exhaust pipes. Other sizes available as a special order. Minimum special order 5 pieces. P/N 12-30212.... ..... $41.75 ea.
The exhaust port resurfacing tool is designed to recondition port surfaces where no more than .010 of material need to be removed. It is easily bracketed and aligned to the port in reference to the rocker cover surface. Execution of the cutting operation only requires hand power. No air or electrical power is required. Mounting bracket adapters are available for the following engines: A&C series continentals, Lycoming Parallel Valve, Lycoming Angle Valve, others on request.....................................................P/N 12-17605 .............$396.00 A & C Series Continental Bracket ......P/N 12-17609 .............$176.95 Lycoming Parallel Valve Bracket........P/N 12-17610 .............$177.65 Lycoming Angle Valve Bracket ..........P/N 12-17611 .............$247.50 Cutter Head Inserts ............................P/N 12-17607 ...............$28.75 EAR ISLAND REMOVAL TOOL When substantial quantities of material have to be removed from the exhaust port, it may be necessary to also remove the island around the exhaust stud area. The ear island removal tool and pilot can be used to accomplish this without the use of power tools. ........................................................P/N 12-17608 .............$103.95 This handy tool gives you a fast, drum-tight, mirror smooth finish. Its ideal for heat-shrinkable covering films. Get a professional finish with less time and effort. 1-yar warranty. Features: Includes removeable wide nozzle 1000W heating power Heavy-duty fan motor Textured, composite hand-grip 3-position, hot/cool/off switch Adjustable air intake baffle Wt: 15 oz 5.5 AC power cord w/2-prong plug. P/N 12-00527 .......... $27.50 The core recessor is a new product with the purpose of serving as an efficient tool that makes the process of removing core cells in Nordam Panels and composite fiberglass more efficiently. Thus, it reduces time for edge fillers, which are necessary procedures to customize aircraft cabinets, floorboard, vanitys headliners, valance panels, etc. Is light weight, easy and safe to use. Core panels from 1/8 to 3/4 inch with no adjusting. Requires no electricity. Core Recessor ............................................P/N 12-02270 ........ $106.95 Core Recessor Mini .....................................P/N 12-02271 .......... $73.50
2.5 times the desiccant capacity of previous design, One piece construction allows the dessicant to be contained in the core of the plug. Made of durable high quality urethane rubber that will last almost indefinitely P/N 12-01057 ......$44.50/ea
This compact, low-voltage dehumidifier is an ideal way to eliminate dampness and mildew in aircraft which can cause mildew growth in carpet and upholstery and wreak havoc with electrical systems. In stall under the instrument panel or on the deck between seats. If installed in the engine compartment, Goldenrod will eliminate moisture which leads to rust, keep ignition wiring dry, and facilitate cold weather starts. In the hangar, Goldenrod can protect parts, tools, supplies, and components. Operates on standard 110V current 24 hours per day but uses four times less power than a standard light bulb. Safe and effective. Available in four lengths. Part No. Length Watts Approx. Coverage Up To Price Ea. 12-30225 12 8 100 cubic feet $39.50 12-30230 18 12 200 cubic feet $42.50 12-30235 24 15 300 cubic feet $44.75 12-30240 36 25 500 cubic feet $47.95 This is a product that is the answer to a very common problem in Aircraft, HUMIDITY!!! The Eva-dry is a 100% renewable, wireless, mini dehumidifier that requires no power to operate. It works with a Silica gel that absorbs moisture from where ever it is placed. There is an indicator window on the front of the unit that will change from blue to pink as the units absorbs moisture. Once the crystals have turned pink it is time to renew. To renew, simply fold down the hidden plug on the back of the unit and plug it in to any a/c outlet for 8-10 hours. A heating element will be activated which will evaporate the moisture. The Eva-dry has a 10 year life span and has a 5 year mfr. Warranty. Size: 6.25 X 4.75 X 1.25. P/N 12-01621 ........................... $29.95
GOLDENROD DEHUMIDIFIER
EVA-DRY DEHUMIDIFIER
725
TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This wing stand is ideal for aircraft homebuilders or restorers needing to safely store and protect aircraft wings during the project. It accommodates virtually all shapes and sizes of wings and is available at a very economical price. We ship this wing stand direct to you from the factory (freight collect). Dims: 72l x 44h x 36w. Assembly req. Each stand holds 2 wings. P/N 12-21390 .....................$199.00/ea
WING STAND
FOR UP TO .032 ALUMINUM SHEET - To use the Lap Joint Joggle Tool, install washers to adjust joggle set-back from edge of sheet. Start at one end of sheet and pull smoothly along edge to be joggled. Keep back plate of tool firmly and squarely against edge of sheet for smooth and parallel joggle. To break a sheet edge, insert sheet just one bearing depth (.4) then bend down as desired as tool is pulled along edge. Adjustments - For set-back, add or subtract washers. For different material thickness, loosen bolts, spread or close. For use on aluminum sheet up to .032 thickness. P/N 12-30275 ...........$41.90
AeroRoller makes movement of your aircraft or wheeled equipment easy. Aircraft can be loaded on AeroRoller without jack and minimum effort is required to move aircraft when on rollers. AeroRoller is constructed of Industrial 1/4 steel plate. Heavy duty Duraform 360 swivel castor wheels means no flat spots. Brake castor lock parking location. Each unit can carry 1000 lbs. Manufacturers warranty covers defective parts & labor. 2-Roller Set ...............P/N 13-00071 .........$176.95 3-Roller Set ...............P/N 13-00072 .........$209.00
AEROROLLER-1000
NON-CONTAMINATING SCRAPER
Our Non-Contamination Scraper is suitable for all airframe scraping operations. It will not contaminate delicate aluminum parts with steel particles which can induce corrosion. It is easily resharpened with a mill file and the .060 thick heat treated aluminum blade is easily replaceable. Features positive wood grip handle. P/N 12-30205 ...........$21.60
Maintaining adjustable cockpit seats, or passenger seating secured in notched tracks, requires removing the dirt and grit that have become embedded in the tracks. Rex-Cut Products has developed a thin-profile mounted wheel specially designed to accomplish this job efficiently and safely. The seat track cleaners are manufactured using layers of reinforced nonwoven cotton fiber and abrasive grain which are bonded into discs. When mounted on a die grinder they are able to fit inside the seat tracks. Designed for cleaning all the interior surfaces of the track without having to change discs, one disc will remove caked on sludge, dirt and grit while removing minor burrs and rough edges. The seat track cleaners are non-loading on aluminum and leave superior surface finishes. Available in 54 and 80 grits in aluminum oxide grain mounted on a 1/4 x 1/2 shank. 54 Grit Seat Track Cleaner ............ PN 12-00955 ................. $7.95 80 Grit Seat Track Cleaner ............ PN 12-00952 ................. $7.95
FOOT SQUARING SHEAR - Tennsmith squaring shears offer precision shearing and rugged construction. These shears feature traction, ground alloy tool steel blades to prevent material movement during shearing. Will shear material up to 16 gauge mild steel and up to 20 gauge stainless steel. Both blades are adjustable and back gauge gives highly accurate readings. Wts: Model 36: 700 lbs. Model 53: 950 lbs. Shipped truck collect to you direct from factory in Tennessee. Model 36 Shear (Max. Cutting Width 37) P/N 12-20715 ......$1,939.00 Model 52 (Max. Cutting Width 52) ...........P/N 12-20720 .....$2,498.00
Blue vinyl hand grip over steel handle reduces sting on technicians hands and provides 100% grip. 3 lb. slide weight is mounted on 1/2 plated steel shaft. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and L puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2 - 20. P/N 15-08252 ...........$41.50
SLIDE HAMMER
Machinist Hook Scribe New. 2-point scriber has hardened, ground steel points. Features a straight point and a 90 degree point. Length: 9. P/N 12-02896 .............$3.95
Both the 45 degree and pig tail points of the scribe are made of hardened, ground steel. Both ends of the tool unscrew from the body. P/N 12-02897 .............$3.95
726
NOTCHERS
Constructed of 6061T6 hard anodized aluminum extrusions, steel, and cast iron with two 2750 lb. rated roller needle bearings, the Accu-Jigger rigidly holds the holesaw and tube to produce accurate, chatterless cuts. Accu-Jigger, with Single Point Technology, is able to notch tubes that Fit Right The First Time as fast as those produced from custom tooling. It employs a flip up Tube End Stop, (2) 1 step, pin settable Angle Indexes and standard bimetal holesaws to accurately notch the ends of tubes used in aircraft fuselages and engine mounts. Notches tubes up to 1 diameter with up to 2 holesaw at angles from 30 to 90. Spin Angle settable 0 to 359. Meant to be driven by 1/2 inch chuck hand drill or mounted to a drill press. 1 diameter capacity ...................P/N 12-00377 ........ $349.95 2 diameter capacity ...................P/N 12-00529 ........ $479.95 Produces accurate notches in steel or aluminum, giving perfect fits for better, stronger welds. It can be mounted on your drill press or bolted to a stand and powered by a hand drill. Built-in protractor gives accurate cuts from 90 down to 40. Sturdy accurate V-block clamping system will hold 3/4 to 2 tubing (pipe size from 1/2 to 1-1/2). It works fast, accepts standard hole saws, and is powered by any 1/2 variable speed drill motor. Notches all the way through in one pass. Hole saw cutters sold separately. P/N 12-30000 ........ $223.59
OL JOINT JIGGER MODEL RTN-100 TUBING NOTCHER Ol Joint JiggerTM quickly notches tubing of up to 2 O.D. in less than 30 seconds. Great for assembling and welding tubing in your garage or workshop. Adjusts in single degree increments to make up to 60 angle notches. Automatic round tubing centering and alignment. CNC machined steel construction. Bi-metal hole saws not included. Use with your 1/2 hand drill. U.S.A. Ship Wt. 9 lbs. P/N 12-01107 ............ $159.95 RTN-BASE (UNIVERSAL DRILL PRESS MOUNT) - For use with RTN100 only. Allows for set up and dedication of a small drill press for tube notching. Adjustable for out-of-square tables, the RTN-Base also makes it easy to lay the notcher over horizontally, still bolted to the table, to handle long or cumbersome tubing that cant be notched in a vertical position. Minimum requirements: 1/3HP drill press with 3-1/2 to 4 of travel and 14 from the table or base to the chuck. (Bolts for attachment included) U.S.A. Ship Wt. 3 lbs. P/N 12-00691 .............. $32.25
OL JOINT JIGGER
CM WP ME HA AP LG EP CS IN EL AV
PIPE NOTCHER
OL JOINT JIGGER MODEL RTN-1000 DELUXE ALUMINUM TUBING NOTCHER - Ol Joint JiggerTM combines precision performance, versatility and comfort for quickly notching tubing of up to 2 O.D. in less than 30 seconds. Enhanced vibration-reducing design and dual-axis base allow for either work bench or drill press mounting to provide the professional or hobbyist with the ultimate in tubing notchers. Laser-engraved protractor allows adjustments in single degree increments to make up to 60 angle notches. Automatic tube centering and alignment. Anodized aircraftgrade aluminum construction. Bi-metal hole saws not included. Use with your 1/2 hand drill or drill press. U.S.A. Ship Wt. 9 lbs. P/N 12-01108 ............ $237.95
A non-spill bit holder at your fingertips. 36 individual 1/4 and 5/16 screwdriver bits may be stored in this magnetic-based organizer. Remains solid at any angle placement while holding bits in their respective slots. ...........P/N 12-01083 .......... $19.75
These super-strong magnets made from neodymium are lighter and five times stronger than samarium-cobalt rare earth magnets. Nickel plated to resist corrosion. Ideal for work projects, experiments, shop and everyday use. Pack of 10. P/N 10-04077 .............$2.60
For AN4 Screws. You know how frustrating it can be to remove a painted over screw only to wind up chipping up the paint job. But you wouldnt have that problem if you had a set of these innovative paint cutters. They work by slicing through the paint around the head of the screw so you can remove it without chipping the paint. They have a 1/4x28 thread to fit into any angle drill or you can get the optional arbor (p/n 12-02460) for use in a drill chuck. Does not work on dome head rivets. 1 lbs (0.5Kg) shipping weight. Size Part No. Price Size Part No. Price AN4 12-02452 $23.75 AN6 12-02453 $22.85 AN8 12-02454 $25.75 AN10 12-02456 $24.85 1/4 12-02459 $22.65 6 pc. Set 12-02461 $119.95 Arbor .........................P/N 12-02460 .......... $18.75
HOLESAW ASSORTMENTS
Description 1, 1-1/8, 1-1/4, 1-3/8, & 1-1/2 1-1/8, 1-1/4, 1-3/8, 1-1/2 & 1-5/8 1-1/4, 1-3/8, 1-1/2, 1-5/8, & 1-3/4 1-3/8, 1-1/2, 1-5/8, 1-3/4 & 1-7/8
Aircraft instrument mounting hole drill jig for standard 2-1/4 & 3-1/8 diameter instruments. Accurate and simple tool to use, drill jig made of hardened steel for long life. P/N 12-00975 .............. $34.85
This versatile tool saves you time and trouble by instantly magnetizing or demagnetizing you tools & parts on the job. Reliable, powerful permanent magnets for a super long life, and its compact size,shatterproof plastic shell, this tool will fit easily in you tool box. This tool allows easy, precise handling of small steel parts in confined spaces, collects metal items from inaccessible places, leaves 1 hand free for positioning the work piece, demagnitizes instruments & electronics components. Size: 2.1x2x1.1. Wt. .22 lb. P/N 12-16835 ................... $16.50
MAGNETIZER / DEMAGNETIZER
Pipemaster gives aircraft builders the ability to cut a piece of tubing on both ends and have it fit its intended location on the first try. Tedious hours of grinding and misfit joints can be eliminated producing exact welds and stronger airframes. Features spring temper stainless steel pins, aluminum inner shell, and rugged ABS housing. Simply slip over the pipe, push down, transfer and cut, and the tubing is ready to weld. Pipemaster transfers the exact outline of the pipe joint in just seconds. Use for penetration cuts as well. Part No. Tubing O.D. 12-00102 3/4 12-00103 7/8 12-00104 1 12-00105 1-1/8 12-00106 1-1/4 12-00107 1-5/16 12-00108 1-3/8 Price $39.65 $47.75 $39.85 $50.25 $41.75 $49.80 $57.25 Part No. Tubing O.D. 12-00109 1-1/2 12-00111 1-5/8 12-00112 1-3/4 12-00113 1-7/8 12-00114 2 12-00116 2-3/8 Price $57.25 $57.25 $62.50 $65.50 $65.50 $66.50
TO PS BV
727
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Size (inches) 4.5 6 9 15 21 27 36
Countless prototypes were built and tested for three years on performance, comfort, and durability to bring forth a line of finely tuned sanding tools that have been refined to perfection. Adjustable Flexibility Sander available in 4.5", 6", 9", 15", 21", 27", and 36". Part No. 12-02862 12-02866 12-02867 12-02868 12-02869 12-02870 12-02871 Price $24.85 $14.90 $41.90 $67.75 $73.65 $104.50 $199.75
For the removal of seam sealant, corrosion, paint, vinyl decals, glue on aluminum and alloy. SET 1 - MP-3500 - MBX Pneumatic Power Tool S (3500 rpm) with adapter system for 23mm belts/31mm rubber eraser. AA-0011 - Adapter for 11mm wire belts BS M11X - V2A Wire Belt, Med., 11mm angled tips BS-F11 - V2A Brush Belt, Fine, 11mm RE-0023 - Rubber Eraser, 31m P/N 12-01394 .................. $502.85 For the removal of seam sealant, corrosion, paint, vinyl decals, glue on aluminum and alloy.
The P-KIT (Inspection Prism Kit) is packaged as a completely self contained aircraft window inspection tool kit. It comes in a waterproof lockable case and includes Instructions, Inspection Prism, Coupling Agent and a 6000 Candlepower Flashlight with batteries. Its ready to use to inspect your aircraft windows for possible bolt hole damage. P/N 12-01333.......... $795.00
ME-3200 - MBX ELECTRIC POWER - Tool A (3200 rpm) with adapter system for 23mm belts/31mm rubber eraser AA-0011 Adapter for 11mm wire belts BS-M11X - V2A Wire Belt, Med., 11mm angled tips BS-F11 - V2A Brush Belt, Fine, 11mm RE-0023 - Rubber Eraser, 31mm P/N 12-01396 ................... $514.85
MBX Belts are made of a high-performance polyamide fabric - tension resistant up to 440 kilograms. Individual bristles made of spring steel or stainless steel are anchored U-shaped in the flexible polyamide fabric. The materials used for the production of MBX Belts offer top safety and durability due to the high flexibility of the MBX Belts. No clogging - no heat built-up - no grinding. The high masses due to centrifugal force during rotation are absorbed safety by MBX Adapter Systems.MBX Medium have angled tips to create a sandblast effect. 11mm is for expecially hard-toreach-areas such as a 90 angles. BS-M11X Med. Blue 11mm Brush P/N 12-01402 ........... $29.85 BS-M23X Med. Blue 23mm Brush P/N 12-01403 ........... $29.85 BS-F11 Fine Blue 11mm Brush P/N 12-01404 ........... $29.85 BS-F23 Fine Blue 23mm Brush P/N 12-01405 ........... $29.95
3/8 Drive, 3-inch, locking adapter for electric tools P/N 12-01706 ...........$23.50
Medium (11 or 23 mm) For the removal of seam sealant & corrosion on alluminum bodies
PATENTED TECHNOLOGY - MBX Systems are different from conventional surface treatment systems in that MBX Systems are based on several physical principles. Flexible brush-belts are inserted loosely into a cage-like adaptor system and secured with safety arms. The centrifugal force created by rotation causes the brush-belt to tighten and work as if suspended on a cushion of air. Advantages:Vibration-free operation: The vibration of the wire bristles that occurs when the bristles strike the target surface is absorbed by the air-cushion. The bristles re-strike the target surface at rest (without vibration). This achieves the maximum kinetic energy.
The rotating toothed eraser wheel, patented For the removal of self-adhesive foils and materials, wide-area decoration, adhesive residue on decorative strips and lettering on OEM-painted surfaces made of metal, aluminium, glass, fibreglass (gel coats) - and most amazing: NO PAINT DAMAGE.The centrifugal force created by rotation makes the MBX Vinyl Zapper work as if suspended on a cushion of air. Advantages: Faster working speeds of up to 3,500 rpm Conventional rubber eraser wheels operate only at circa 1,500 rpm. No paint damage, no smearing despite speeds of 3,500 rpm Toothed wheel design. Easy handling. Vibration-free, smooth running (compare a solid rubber tire with an air-filled tire). Increased performance. The working surface of the MBX Vinyl Zapper is strongly enlarged by the application of pressure to the work surface. This improves performance (compare to a car tire containing only a small amount of air). Long service life Wide construction. Vinyl Zapper 31mm Toothed Wheel Construction Removal of elements such as vinyl decals & DOT tape from metal surfaces, fiberglass, plate glass, wood, aluminum, OEM paint finish. P/N 12-01406 ............................. $31.95
MBX Vinyl Zapper Kit is for removing vinyl decals and graphics on metal glass and fiber glass. It is available with either a pneumatic tool or an electric tool. Description Part No. Price MBX Electric Vinyl Zapper Kit USSE-01-05 MBX 12-02037 $469.50 Electric Tool, 1-23mm Adaptor, 3 Vinyl Erasers MBX Pneumatic Vinyl Zapper Kit USSP-01-05 MBX 12-02038 $469.50 Pneumatic Tool, 1-23mm Adaptor, 3 Vinyl Erasers
For storage of up to 15 wire belts or 9 rubber erasers and one MBX Power Tool (machine, belts, erasers not included). P/N 12-01399 .................$52.75
STORAGE STATION
728
CM WP ME HA AP LG EP
KK-SERIES SHORT BODY SPRING CLECOS - A shorter overall body to use in areas of limited space. 0-1/4 grip range. Made in USA
Description CC-3/32 CLECO CC-1/8 CLECO CC-5/32 CLECO CC-3/16 CLECO Size 3/32 1/8 5/32 3/16 Part No. 12-02073 12-02074 12-02075 12-02076 Price $0.82 $0.79 $0.83 $0.83
CL SERIES - The CL series fasteners are the standard plunger type Cleco with an extended grip range. Spring type Fastner
Description 0-1/2 Grip, Zinc 0-1/2 Grip, Copper 0-1/2 Grip, Black 0-1/2 Grip, Brass Size #40 #30 #21 #10 Part No. 12-02425 12-02426 12-02427 12-02428 Price $0.83 $0.83 $0.79 $0.79
Fabricated of durable polypropolene, the Cleco Keeper is prepunched to hold up to fifty sheet metal fasteners. Allows the builder to extract and install Clecos from the storage bin to the work with one hand. Compact, the Cleco Keeper measures 8L x 3W. Helps eliminate misplaced fasteners and makes inventory of available fasteners quick and accurate. Available in three models to hold 3/32, 1/8, or 5/32 clecos. For 3/32 clecos ........P/N 12-10116 .............$7.95 For 1/8 clecos ..........P/N 12-10117 .............$7.95 For 5/32 clecos ........P/N 12-10118 .............$7.95 For 3/16 clecos ........P/N 12-00604 .............$7.95
CLECO KEEPER
Manual Wing Nut Style - Standard Grip 0-1/2. Wing Nut Fasteners are recommended for low production applications where high clamping force is required. The clamping force ranges from zero to 300 lbs. Description Size Part No. Price 0-1/2" Grip Manual Wing Nut Fastner, Zinc #40 12-02437 $2.90 0-1/2" Grip Manual Wing Nut Fastner, Copper #30 12-02438 $3.10 0-1/2" Grip Manual Wing Nut Fastner, Black #21 12-02439 $3.10 0-1/2" Grip Manual Wing Nut Fastner, Brass #10 12-02440 $2.80 Manual Wing Nut Style - Long Grip 0-1 Description 1" Grip Manual Wing Nut Fastner, Zinc 1" Grip Manual Wing Nut Fastner, Copper 1" Grip Manual Wing Nut Fastner, Black 1" Grip Manual Wing Nut Fastner, Brass Size #40 #30 #21 #10 Part No. 12-02441 12-02442 12-02443 12-02444 Price $3.15 $3.20 $3.15 $3.15
CS IN EL AV TO PS BV
Eliminates surface marring both on painted and unpainted surfaces. Easily slips on plier operated style clecos, one size fits all. Yellow polyurethane color. 25 pcs./pkg. P/N 12-00626 .......... $10.50 These pliers are designed to grip and actuate all standard sizes of sheet holders and tension clamps. New manufacture. P/N 12-10105 .............$5.40 Used in limited access areas. requires less travel per activation. Model TP74B. P/N 12-00370 ...........$25.75
Milwaukee hole saws provide an economical means of extending the useful range of portable drills, drill presses and lathes. High speed cutting edges welded to steel bodies produce clean, accurate holes All hole saws listed cut to standard 1.25 depth. Order appropriate arbor for use with each size hole saw.
Part No. 49-56-0620 12-02001 12-01992 49-56-1000 12-01991 49-56-1180 49-56-1250 49-56-1370 12-01990 49-56-1620 49-56-1750 49-56-1870 49-56-2000 49-56-2250 49-56-3120 Use w/Arbor No. 12-01993 49-56-7055 Price $7.85 $7.95 $7.95 $8.50 $8.50 $7.95 $7.70 $7.95 $9.75 $8.95 $9.95 $9.55 $10.85 $14.85 $15.25
Features a lever throttle, 360 swivel mount, quiet operation, a straight handle, and a 6ft. polyurethane lead hose. Quick insertion of all button or plunger type fasteners, including side grips. Wt. 12 oz. Length: 5 1/8, Air Inlet: 1/4. P/N 12-01120 ...........$84.95 The professional quality crimping tool. This versatile hand tool has crimping dies for insulated an uninsulated terminals and splices in wire sizes No. 22 to No. 10 AWG. It has a terminal locator to position insulated terminals during crimping and an in-nose cutter for tight locations. This tool is a wire stripper and has a built-in heavy duty bolt cutter. Color coded dies in tool nose correspond to color on terminal insulation sleeve to insure die selection. A stud gauge and wire stripping gauge are important on the tool body. Cushioned handles. Made in the U.S.A. P/N 604252-1 ...........$19.85 The AMP Bantam Rota-Tool crimps uninsulated terminals and splices for No. 8 to 1/0 sizes. The correct die position is selected by rotating dies to correct AWG number. Dies are fixed in tool to avoid loss. Compact, rugged and easy to handle. 15 long. Wt. 5 lbs. Not for certified Aircraft use. P/N 601075 ............$646.00
Hole Dia. 5/8 3/4 7/8 1 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 3-1/8
729
TOOLS - CUTTERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Brown & Sharpe Taper pin reamers for installation of AN385 and AN386 aircraft taper pins. Straight shank, straight flute. High speed steel. No. 596 Straight Flute.
B&S Taper No. 1 2 3 4 5 6 Diameter Small End Large End .1974 .3176 .2474 .3781 .3099 .4510 .3474 .5017 .4474 .6145 .4974 .6808 Flute Length 2-7/8 3-1/8 3-3/8 3-11/16 4 4-3/8 Part No. 12-01622 12-02704 12-09900 12-10000 12-10100 12-10200 Price $43.00 $47.75 $49.75 $49.85 $56.75 $59.65
Ergonomic 45mm rotary cutter features a unique comfortable handle design for both left- and right-handed use. Features include the dualaction safety lock that allows the blade to be locked open for comfort and closed for safety. Accommodates the Olfa straight, wave & pinking blades. The cutter is a rolling razor blade used to cut fabrics into shapes, strips and pieces. Guaranteed forever. Suggested uses: cut fiberglass, composite materials, delicate cloth, fabric, paper, leather, etc. Rotary Cutter ...............................................P/N 01-00302 .......... $23.50 RB45-1 Replacement Blade only ................P/N 01-00300 ............ $6.95 RB45-1 Replacement Blade pk of 5............P/N 01-00301 .......... $27.75 Rotary Pinking Blade ...................................P/N 12-01709 ............ $9.75 Good For: general quilting, sewing and craft projects. Great for cutting out patterns, reduces fraying. Can be used in industrial applications. The OLFA stainless steel scissors (7 overall length) are rapidly growing in popularity in both consumer and industrial applications. Extremely high quality stainless steel blades meet perfectly for precision cutting. The material being cut is held in place by one blade which is serrated, providing positive control. Ideal for use on such varied materials as paper, fabrics, plastic, rubber, & aircraft composites. .........P/N 01-00303 .......... $19.00
ROTARY CUTTER
The Tapered Pin Extractor tool easily, inexpensively, and without damage removes the tapered pin from the control column universal joint in Piper models PA-28, PA-32, PA-34, and PA-44. Made of Stainless Steel with two carbon steel capscrews. P/N 12-02933 .......... $86.50
5 stainless steel scissors are ideal for consumer and industrial applications. High quality stainless steel blades meet perfectly for precision cutting. The material being cut is held in place by one blade which is slightly serrated providing maximum control. Scissors so sharp, they can cut through electrical wiring, plastic, aircraft composites, Kevlar and more. P/N 12-02975 .......... $19.00
Our Two Step Stud Extractors are the simplest way to remove broken studs and require only 1/8 of the broken stud for removal. Simply tap stud remover on stud or frozen bolt with a hammer or mallet, and then remove stud by attaching a wrench to the hex portion of the remover. Just hammer on and screw out. Built to last from case hardened steel. Stud Extractors available in sizes listed below. Part No. 76001-76 76002-76 76003-76 76004-76 76005-76 76006-76 76007-76 Size 3/16 1/4 5/16 3/8 7/16 1/2 9/16 Price Ea. $41.50 $39.95 $42.85 $44.85 $43.75 $49.75 $64.25 Part No. Size Price Ea. 76008-76 5/8 $67.25 76009-76 3/4 $67.25 76010-76 7/8 $74.50 76011-76 1 $78.75 76012-76 Set 3/16-1/2 $212.95 76013-76 Set 9/16-1 $351.95
SPOTFACE KIT
The Spotface Kit tool makes a flat spot for screws. This tool is specifically modified to provide rail cap clearance for use on seat rails. Cutter comes with 1/8", 5/32", 3/16" pilots. P/N 05-04429 .......... $74.75
Self-healing, double-sided large mat protects and covers work. Green, self-healing professional quality rotary mat. Double-sided with yellow grid lines on one side for precision cutting, solid on opposite for general cutting. 1.5mm thick for a variety of applications. Store flat.
24" x 36" .......................................................P/N 12-02403 ..........$39.75 23" x 70" - with clip set (RM-clips/2) ............P/N 12-02404 ..........$79.25 35" x 70" - with clip set (RM-clips/3) .............P/N 12-02405 ........$133.95
L-2 CUTTER - 18MM heavy-duty cutter features a ratchet wheel blade lock, heavy gauge stainless steel blade channel, highest grade carbon tool steel blade and antislip rubber grip insert. Guaranteed Forever. P/N 12-00258 ........ $8.50 NOL-1 CUTTER - Heavy-duty 18mm HandSaver Acetone resistant cushion grip with ratchet wheel blade lock and highcarbon tool steel snap-off OLFA blade. Guaranteed Forever .. Cutter .....................P/N 12-00257 ............... $8.50 Replacement Blades (5 pack) ..................P/N 12-00261 ............... $4.45 SNAP IT N TRAP IT CUTTER - 18mm heavy duty cutter features an innovative design for performance and functionality. Developed for professionals looking for a convenient way to snap-off and securely store their dull blade segment for increased on-the-job productivity. Features a convenient detachable built-in blade snapper/disposal container in a heavy-duty ABS plastic handle. Cutter......................................P/N 12-02696 ............ $10.95 10 Pack Blade ........................P/N 12-02697 .............. $7.75 ULTRAMAX CUTTER - Heavy-duty utility knife / cutter is an auto lock cutter includes a stainless steel blade channel with a unique cushion handle provides a comfortable and positive grip. P/N 12-02367 ........ $8.65 H-1 CUTTER - 25mm Extra heavy-duty cutter features largest blade available, ratchet lock to prevent slipping, rubber grip insert for positive control, and a rope loop to secure cutter to belt or work table. Cutter...........................................P/N 12-00259 ....... $13.75 Replacement blades (5 pack) .....P/N 12-00260 ......... $6.60 AUTO-LOCK STAINLESS PROFESSIONAL KNIFE - Accomodates both left- and right-handed users. Features locking slide blade, stainless steel handle and built-in pocket clip/blade snapper. A perfect steel cutter where rust is a concern. Lifetime Guarantee. Cutter .......................................... P/N 12-00339 ........ $7.50 Replacement blades (10 pack) ... P/N 12-00340 ........ $4.65 EXTRA HEAVY DUTY RACHET LOCK CUTTER - 25mm Extra heavy-duty cutter features: *anti-slip cushion handle for exceptional comfort and safety *chemical resistant handle for easy cleaning * Heavy guage stainless steel blade channel holds blade tight * ratchet wheel blade lock *rope loop * high-quality carbon tool steel snap-off blades for sharpness and durability. P/N 12-02368 ...... $14.75 EXTRA HEAVY DUTY SNAP-OFF BLADE, 20 PACK - Snap-off black blades, are made from high quality carbon tool steel. Blade container locks for safety. Fits most Extra Heavy-Duty handles. 7 cutting edges per blade. 20 blades per pack. P/N 12-02369 ...... $23.75 EXTRA HEAVY DUTY RATCHET LOCK CUTTER - Anti-slip grip cutting tool. Features an automatic blade lock, cushion grip for maximum comfort and control, and a heavy gauge stainless steel blade channel that holds blade tight. Chemical resistant handle for easy cleaning. Includes a pocket clip for convenience, and the premium, ULTRAMAX ultra sharp durable snap-off blade. P/N 12-02370 ........ $5.75
CUTTING TOOLS
730
Generals industrial quality Steel Rules are precision made with etched fine black graduations for easy reading and long life. The two finishes available are polished stainless steel or satin chrome. Front graduated in 10ths, and 100ths, back in 32nds and 64ths. Quality 12 inch (30cm) flexible stainless steel rule. Precision made. Fine black etched graduations. 6 Long, 15/32 Wide .................P/N 616 ......................$5.25 12 Long, 15/32 Wide ...............P/N 1216 ....................$8.95
STEEL RULES
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Screwdriver and Hobby Kit includes five interchangeable blades and a heavy duty knurled handle. Loaded with the most popular jewelers-sized Slotted and Phillips tips and a scratch awl, this modestly priced set is great for model making and other small-scale applications. P/N 12-19600 ................$5.95
These industrial grade Alnico (Aluminum/Nickel/Cobalt) Magnets are built for heavy duty use and will not naturally demagnetize over time like other magnets. They are handy in a plethora of applications and work settings. The horseshoe-shaped Power Alnico Magnets are available in 2 distinct sizes with extraordinarily strong pull capacities ranging up to 13 lbs.No. 370-1 Pocket Magnet, 3/4 oz., approx. 1 lb. pull P/N 370-1 ..........$5.95 No. 370-2 Power Magnet, 2 oz., approx. 13 lb. pull P/N 370-2 ........$12.95
The Swivel Head Pin Vise provides fingertip control of small tools when working with jewelry, electronics or models. The double-ended collet offers two distinct sizes for holding a variety of drill bits, reamers and taps. For added control, this Pin Vise has been design with a knurled aluminum body for a sure grip while the swivel head turns smoothly against your palm. P/N 92 ............................$9.95
#20 WIRE GAUGE - The Wire Gage helps you to accurately determine the thickness of American Standard wire from 0 to 36. The Gage works with all non-ferrous wires, metals and rods such as copper, brass and aluminum. This heavy duty tool is made from hardened and tempered steel, and is stamped with wire sizes on the front and their decimal equivalents on the back #20 American Standard Wire Gauge - For gauging non-ferrous wire & metal like copper, brass, aluminum, etc. P/N 12-02384...........$22.65
Generals heavy duty steel protractors are trusted by machinists and draftsmen worldwide to deliver crucial measurements with unwavering accuracy. The 6 adjustable arm is ideal for setting bevels, taking measurements and transferring angles. Ultra-fine etched graduations read from 0 to 180 degrees in forward and reverse directions, and will not wear or rub off. Made of ground stainless steel for precision and durability. P/N 17 ..........................$13.75
STEEL PROTRACTORS
Although small in stature, these 4 Slide Calipers deliver the same accuracy and precision as some of our larger models. The rugged, stainless steel construction, coupled with a compact design makes these Slide Calipers a great addition to any workbench or toolbox. This item provides inside and outside readings in both 1/16 and 1/32 graduations. In addition, there is a decimal equivalents chart on the calipers back side for help in making measurement calculations.16ths & 32nds P/N 729 .......... $11.75 16ths & MM........................P/N 12-01633 . $12.25 Just dial the size and avoid damaging wire, especially when used repetitively. Spring opening jaws can be locked in closed position to protect cutting edges. Made of tool steel, equipped with vinyl cushion grip handles. Individually carded. P/N 69 ...............$9.75
POCKET CALIPERS
If youre looking for a quality, yet economic awl, then check out our Screwdriver Handle Scratch Awl. Featuring a 3-5/8 steel blade and a durable plastic handle, this Scratch Awl makes a great addition to any workbench of toolbox. P/N 12-01873 ...........$5.95 The Utility Automatic Center Punch is our most economical model, offering a lightweight aluminum body and a hardened steel point. The punch is great for use on various metals and woods, and is impact adjustable. P/N 12-01874 .........$11.85
Blades are made of tempered steel of exacting tolerances. Each blade has its size etched in both decimals of an inch and millimeters. Nickel plated case has knurled locking nut. No. 230 has 26 3x1/2 in. Ieaves of the following sizes: .0015, .002, .0025, .003. .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024 and .025 in. P/N 230 ......................$7.75 Generals revolving punch plier is a convenient spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials. The snap ring pliers are used for the installation or removal of exterior and interior snap rings. Revolving turret with six hardened steel punches: 5/64, 3/32, 7/64, 1/8, 5/32, and 3/16 P/N 72 ........................$9.90 The Thread Repair Files help breathe life back into bolts, screws or fittings that have been damaged due to cross-threading or corrosion. Made of high carbon steel, the Repair Files offer eight different thread pitches. In addition, the Thread Repair Files can also be used as a screw pitch gage. P/N 12-01880 ...........$77.50
FEELER GAGES
Generals adjustable trammels accurately measure and mark distances that are too great for conventional compasses and dividers. Trammels will accurately transfer measurements, scribe arcs and lay out circles. Points can be replaced with pencils, ballpoint pens, crayons or soap- stone sticks for marking various materials. P/N 520 .......$34.75
TRAMMEL POINTS
REVOLVING PUNCH
Generals Drill Gages help you to quickly and accurately identify the sizes of stray drill bits in your workshop. These gages can be extremely useful with older, unmarked bits or ones that are too small for markings. Each heat treated, heavy steel gage is machined to close tolerance for spot-on accuracy. The bit sizes and decimal equivalents are permanently etched to the face to provide years of dependable use. Part No. No. 12-00518 13 12-00519 14 12-00378 15 Description Number size drills 61 to 80 Fractional size drills 1/16 1/2 x 64ths Number size drills 1 to 60 Price $15.75 $12.75 $13.25
DRILL GAUGES
731
PRECISION MAGNETIZER/DEMAGNETIZER
Our Drive Pin Punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole. The punch ends are ground square to sit flush on the top of the pin. Made of hardened tool steel with a knurled body, Generals Drive Pin Punches can either be held by hand or with our Punch and Chisel holder. This five-piece set features extra-long 3-1/2 shafts for reaching deeply recessed pins. P/N 12-01875 ......................... $29.85
Our Precision Magnetizer and Demagnetizer transforms standard screwdrivers, tweezers and tool bits into powerful magnetic pickups. This dual-sized device can magnetize screwdrivers for installing small screws in jewelry, or demagnetize a set of tweezers for working with sensitive electronics. In addition, the innovative step design allows you to control the level of magnetism that is imposed upon your tools. P/N 12-01890 ........................... $3.45
Our extensive selection of Arch Punches are machined to close tolerances for creating precise holes in gasket material, rubber and soft metals. These industrial-quality tools are hand forged to ensure the longevity and accuracy of the cutting edge. This seven-piece set includes some of our most popular punch sizes and is conveniently packaged in a vinyl storage pouch. P/N 12-01891 ......................... $73.75 Generals Inspection Mirrors are known for their seemingly limitless uses both around the home and in the shop. For instance, an Inspection Mirror can be used to check behind an armoire for lost keys or beneath an engine block for a missing bolt. The Inspection Mirrors come in a variety sizes and lengths, and feature dual ball-and-socket joints for infinite angle adjustments of the mirror. 1-1/4 Diam ................P/N 12-01887 ........................... $6.75 2-1/4 Diam ................P/N 12-01888 ........................... $9.75 3-1/2 Oblong.............P/N 12-01889 ......................... $10.75
Our UltraTech Precision Screwdriver Sets were assembled in conjunction with industry tradesmen to offer the most comprehensive and reliable solutions. This five-piece set includes Slotted and Phillips screwdrivers in two distinct handle sizes. The color-coded ring on each screwdriver helps you to easily identify the blade type when working arduously in the field. P/N 12-01881 ......................... $17.95
INSPECTION MIRRORS
Our UltraTech Precision Screwdriver Sets were assembled in conjunction with industry tradesmen to offer the most comprehensive and reliable solutions. This five-piece Torx set features a great assortment of blades in two distinct handle sizes. The color-coded ring on each screwdriver helps you to easily identify the blade type when working arduously in the field. P/N 12-01882 ......................... $20.75 Get into tight places to retrieve small parts, O rings, and gaskets. Great for household and hobby use. Includes straight pick, 90 pick, 120 hook, and round angle hook. High-visibility handles. Screwdriver-style handles give better control. Specifications: Includes straight pick, 90 pick, 120 hook, and round angle hook, High-visibility handles, Screwdriver-style handles give better control, 5-1/4 average length, Handle: 5/8 square, 2-1/2 L, Approximate weight: 0.20 lbs. P/N 12-02642 ........................... $3.60 The bullseye pick was originally used in the dent repair/collision trade, but also works great for restoration work. These are ideal to reach in around the edge of a panel, around a gusset, or into a blind area to repair the dent from the backside. By sighting the low area through the open sight, the tool will deliver accurate light blows to raise the low area. This tool includes both a regular pick and a blunt tip. The blunt tip works great for aluminum and prevents unattractive pick marks in the metal. 15" .................P/N 12-02292 ........$89.50 25" .................P/N 12-02293 ........$99.75
Our Speed-Chuck Inspection Sets feature a 26 telescoping wand and an assortment of interchangeable tools including mirrors, magnifiers, LED lights, clips and magnets. Simply pull back on the Speed-Chucks spring-loaded collar for effortless swapping of attachments. Whats more, every SpeedChuck Inspection Kit comes in a molded zipper case for simple storage. P/N 12-01885 ......................... $29.25 The Telescoping Alligator Clip is often used as a third-hand tool in electrical repair for holding and positioning wires. It is also commonly employed around the home for lighting pilot lights and barbeques. The extendable shaft reaches up to 24-1/2 for working in cramped areas, or to provide a safety buffer for lighting a gas grill or furnace. The tool condenses to 5-1/2 and is equipped with pocket clip for those on the go. P/N 12-01884 ........................... $5.75 For quick and easy removal of decals, pinstripes, bumper stickers, reflective tapes etc from glass and OEM painted surfaces without any damage. Also very effective in removing adhesive tapes and glue from the back of moldings. Best result at 1500 - 3000 rpm. Let the wheel do the work, apply light pressure only. Start at the top of the decal and move side to side. For faster results, use entire width of the wheel, do not tilt on angle. Remove any residue with appropriate mild solvent. Natural Rubber. Diameter: 4 Inch. Width: 1 Inch. Max RPM: 4000 Universal arbor, no special tool needed. Use with electric or pneumatic tools P/N 12-02401 ......................$14.85 Slotted type cowling fasteners are not easy to fit with generic common screwdrivers. To overcome this, driver has a broad hollow cut tip that accurately engages the drive slot. Additionally, a no mar, spring loaded, plastic sleeve simultaneously guides the tip by fitting around the outside diameter of the fastener head. ......P/N 12-17615 .......... $22.85
BULLSEYE PICKS
The Precision Pencil Compass is a robust scribing and marking tool with a jaw capacity of up to 9. The fulcrum spring handle makes this tool great for making contours, circles and edge marks. A carpenters favorite. P/N 12-01872 ........................... $5.95
Allows for quick limit checking of seat rail hole and wear dimensions Gage elements are made from heat treated blue tempered steel Each element is marked to correspond to the limits set forth in the relevant ad The three gage elements are linked together on a universal spiral key ring. P/N 12-01056 ........... $24.65
732
CM
Our Precision Oiler is a highly accurate lubrication tool intended for anyone working with small mechanical parts. The needlepoint tip allows for the precise placement of oil in confined areas. The smooth thumb actuator lets you control the release of lubricant from the reservoir in small droplets. In addition, the Precision Oiler includes a screw-on cover and pocket clip for use on the go. P/N 12-01894 ........................... $9.75
PRECISION OILER
WP ME HA AP LG EP CS IN EL AV TO PS BV
Designed with the perfectionist in mind, our Rose Pattern Countersinks are a must have for any close-tolerance woodworking or machinist project. A The 5-flute design reduces chatter and easily pierces steel, brass, aluminum, plastic and wood. The stepped shank can be used with either a 1/4 or 3/8 chuck. B C A 1/2 5/8 3/4 B 3/8 3/8 3/8 C 1/4 1/4 1/4 PN 12-01863 12-01864 12-01865 Price $3.75 $4.95 $4.25
The Needle Nose Pliers are long and slender in construction, allowing access into both remote and crowded areas. A great retrieval and positing tool, the Needle Nose Pliers are a staple of hands-on professionals world wide. P/N 12-01886 ........................... $4.15
Our Economy Steel Rules are ideal for a variety of home and office uses, offering the same accuracy youve come to expect from any General tool. Each rule is 6 in length and is offered in five distinct sets of Metric and English graduations. In addition, several of our Economy Steel rules are equipped with pocket clips for use in the field. P/N 12-01133 ........................... $3.35
Generals 6 Contour Gage is designed for precise surface duplication in woodworking, fine carpentry and other professional genres. The 35 ultra-thin leaves per inch assure that you are getting an exact replication of your copied shape. The Contour Gage is capable of duplicating surfaces up to 3-1/2 deep. Instructions: 1. Press Contour Gage against surface to be copied. 2. Trace the formed contour gage onto your cutting material. 3. Cut the material. 4. Fit into place. P/N 12-01870 ........................... $8.95
General Tools Gold Standard Cutting Wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts. The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion. The RW122 is designed for larger capacity cutters on iron pipe and other tough surfaces P/N 12-01159 ........................... $6.50
The power of our Utility Scriber and Etching Pen is eclipsed only by its affordability. This durable scriber is a terrific pickup for making quick and accurate marks in the hardest work pieces. In addition, the Utility Scriber includes a permanent magnet affixed to the cap for retrieving and cleaning loose metal shavings. P/N 12-01876 ........................... $3.60
Generals Plug Cutters produce accurate plugs for covering screw holes in decking, flooring and fine furniture. Plug cutters are great for creating a decorative effect in any woodworking project and can also be used to repair nicks, scratches and dents. Each cutter is made from hardened alloy steel and will fit in both hand-held power drills and drill presses. 3/8 ...........................P/N12-01866 ....................... $4.60 1/2 ...........................P/N 12-01867 ...................... $4.70 5/8 ...........................P/N 12-01868 ...................... $4.85
The standard Tap Wrenches are perfect for creating straight and accurate thread holes in your work piece. The fixed T-Handle provides a large gripping surface for generating maximum leverage. This versatile tool can also be used with reamers, drill bits, screw extractors and other hand-turned tools. Tap Capacity NO. 0 TO 1/4 (1.6 TO 6.3mm) NO. 12 TO 1/2 (6 TO 12mm) Length Part No. 2-1/4 (57mm) 12-01877 3-3/4 (95mm) 12-01878 Price $12.25 $14.75
An Offset Ratchet Screwdriver is a useful tool to have on hand as it provides greater leverage compared to a traditional screwdriver. The swift ratcheting motion allows you to remove and install screws with ease, and the offset head provides oddangle access in obstructed areas. This item features two Slotted screwdriver blades and a reversible ratchet. P/N 12-01883 ........................... $8.90
Noah Industries has introduced the Joggle-360 into its lineup of innovative metal aircraft fabrication tools. The Joggle-360 will joggle round openings for inspection plates with joggle widths up to 0.562 inch and straight joggle offsets up to 0.625 inch. The tool features hardened steel rollers that form the joggle while gliding around the opening or along the edge by ball bearings that eccentrically adjust for joggle width. Instruction: 1. Adjust the guide rollers to the desired set back or width of joggle by rotating the Eccentric Guide Roller Adjustment Screws with an Allen wrench. 2. Place the Joggle-360 onto the work that you are going to joggle and tighten the Tension Knob. 3. For straight joggles, run the Joggle-360 back and forth along the work tightening the Tension Knob as required until you achieve the desired joggle depth. Joggling a hole is the same process. Be sure to keep the Guide Rollers in contact with the edge of your work. 4. When the joggle is finished, loosen the Tension Knob and remove the tool from from your work. Note: You may need to tighten the Eccentric Lock Screws from time to time in order to keep the Eccentric Guide Rollers from rotating during use. P/N 12-02252 .................................................... $99.00
733
There are three basic types of straight thread taps: PLUG TAPS used for ordinary threading and have a 3 to 5-thread chamfer, or relief, at the point. TAPER TAPS have 8 to 10 threads chamfered for easy starting and are used for tough threading jobs. BOTTOMING TAPS with their short chamfer (1 to 1-1/2 threads),are used where the thread must go to the bottom of the hole. Specify Plug, Taper or Bottoming Tap.
PLUG TAPS
Die Size 6-32 8-32 10-32 1/4-28 5/16-24 3/8-24 Left-Hand 12-07601 $4.40 12-07801 $5.25 12-08001 $5.25 12-08201 $6.50 12-08401 $6.50 12-08601 $6.50 Right-Hand 12-07701 $2.60 12-07901 $2.90 12-08101 $2.85 12-08301 $2.85 12-08501 $3.60 12-08701 $3.90
TAPER TAPS
Die Size 6-32 8-32 10-32 1/4-28 5/16-24 3/8-24 Left-Hand 12-07602 Call for 12-07802 price and -availability 12-08202 special 12-08402 order -Right-Hand 12-07702 $2.60 12-07902 $2.70 12-08102 $2.85 12-08302 $2.85 12-08502 $3.60 12-08702 $3.95
Male threaded drill bits of high speed steel screw into female spindle of angle drill or snake drill. Drill Size #10 #20 #21 #30 #40 10-32 Thread Part No. Price 12-05701 $10.95 12-05801 $11.85 12-05901 $12.25 12-06001 $11.75 12-06101 $11.95 1/4-28 Thread Part No. Price 12-05702 $2.80 12-05802 $2.95 12-05902 $2.95 12-06002 $2.50 12-06102 $2.25
Quickly connects to any drill chuck. Makes a convenient, inexpensive closequarter tool. 3/16 drill capacity. Specify threaded spindle size: 5/16-24 (P/N 12-18503), 1/4-28 (P/N 12-18501) or 10-32 (P/N 12-18502) .................. $72.85
13-Piece drilling and tapping set made from special high speed steel. Contains 6 screw machine length drill bits (Nos. 43, 35, 29, 25, 21 and 7), 16 NC taps (4-40, 6-32, 8-32, 10-24, 10-32 and 1/4-20) and one tap wrench. Choice of 135 split point or spiral point drill bits. Set with Split-Point Drill Bits. P/N 41095 ................... $48.50
ANGLE DRILL KIT - Includes tool case, 24 flexible attachment, 4 threaded drills, collet adapter, 90 angle drill, straight drill attachment, 4 collet drills. P/N 12-18505 ........ $313.95
Heavy-duty 90 flexible drilling attachment. Overall length 26. 3 Female threaded spindle sizes. 1/4-28 ......................P/N 12-06500 ........ $108.95 10-32 ........................P/N 12-06600 ........ $159.95 W/Key Chuck (5/32cap.) ............................P/N 12-06800 ........ $136.95
Save hours of tedious drilling, sawing, filing and hand-fitting. Produce clean, true holes for sockets, controls, instruments. Cut clean, burr-free holes with these easy-to-use tools. Can be operated by ordinary wrench. One punch required for each hole size.
Punch Size 1/2 5/8 3/4 7/8 2 1-1/8 1-7/32 1-1/4 Model 730 P/N 12-20905 12-20910 12-20915 12-20920 12-20970 12-20930 12-20935 12-20940 Price $46.75 $41.50 $42.75 $38.85 $134.95 $56.75 $65.50 $69.85 Model 730 P/N 12-20945 12-20950 12-20955 12-20925 12-20975 3-1/8 Punch Size 1-3/8 1-1/2 1-5/8 1 2-1/4 w/ 304AVBB 12-20980 Price $67.25 $77.50 $84.50 $49.75 $129.75 $336.95
Heavy duty yet mini size fits any angle drill or attachment with 1/4 x 28 threads. Its just what you need for close quarter drilling. Features: Capacity from 1/16 to 1/4 3/4 length, 0.13 lbs Wrench included. P/N 12-00245 .......... $18.75
Additional Sizes Available.Drive punches with a ball bearing drive for faster, easier hand operation are available for the 2-1/4 & 3-1/8 knockout punches. Drive for 2-1/4 Punch ..............P/N #304AVBB ..........$29.90 Drive for 3-1/8 Punch ..............P/N #1433AVBB ........$80.75 Remove broken taps and save the threads! Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. The Tap Extractors will fit both NC and NF taps. Sizes: 3/16", 1/4",5/16",3/8",7/16",1/2" P/N 12-02352 ....................$74.50
This 10-piece kit gives you 3 different methods of drilling in tight spots. Each shank is 1/4 x 28 which will thread into most drill spindles that angle attachments and angle drills are supplied with. 0.25 lb. KIT INCLUDES: (4) #200 collets & adapters - drill sizes 11, 21, 30, & 40 (4) threaded drill bits (1-1/4 length) - drill sizes: 10,21,30,40 (1) Cone jaw chuck Model TP258 ............P/N 12-00368 ...........$32.85
734
Designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics, and other soft materials.
ALUMINUM CUT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This 118 point, high speed steel (HSS) drill set performs well in a wide variety of drilling applications. It is recommended for non-ferrous metals, wood, and plastics. Set includes 115 pcs (1/16 to1/2 by 64ths and #1-60 and A-Z in metal index). P/N 12-00536 ................$189.00 For use on hardened, treated, and abrasive materials, stainless steel, cryogenic alloys.
P/N 12-00538 12-00539 12-00540 12-00541 12-00542 12-00543 12-00544 12-00545 12-00546 12-00547 12-00551 Cutting Dia. 13/64 7/32 1/4 9/32 5/16 3/8 1/2 1/8 9/64 5/32 3/16 Decimal Equiv. .2031 .2188 .2500 .2812 .3125 .3750 .5000 .1250 .1406 .1562 .1875 Flute Length 1-3/16 1-1/4 1-3/8 1-1/2 1-5/8 1-13/16 2-1/4 7/8 15/16 1 1-1/8 Overall Length 2-1/4 2-3/8 2-1/2 2-11/16 2-13/16 3-1/8 3-3/4 1-7/8 1-15/16 2-1/16 2-3/16 Price $18.75 $18.75 $21.75 $26.90 $29.75 $45.25 $37.10 $21.75 $12.75 $13.95 $16.95
Engineered specifically for tough applications. Tough cut insures faster, splinter-free cutting in weld & alloy castings with increased tool life.
For use on non-ferrous alloys, cast iron, plastics, aluminum, and highly abrasive materials
P/N 12-00579 12-00580 12-00581 12-00582 12-00583 12-00584 12-00585 12-00586 12-00547 12-00548 12-00549 12-00552 12-00553 12-00554 12-00557 12-00558 12-00561 12-00563 12-00564 12-00567 Cutting Dia. 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 5/16 11/32 3/8 7/16 1/2 Decimal Equiv. .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .3125 .3438 .3750 .4375 .5000 Flute Length 3/4 7/8 1 1-1/4 1-1/4 1-3/8 1-3/8 1-5/8 1-5/8 1-3/4 1-3/4 2 2 2-1/8 2-1/8 2-3/8 2-1/2 2-3/4 2-7/8 3 Overall Length 1-1/2 1-3/4 2 2-1/4 2-1/4 2-1/2 2-1/2 2-3/4 2-3/4 3 3 3-1/4 3-1/4 3-1/2 3-1/2 3-3/4 4 4-1/4 4-1/2 4-3/4 Pice $8.95 $8.75 $7.50 $9.25 $9.75 $10.75 $11.75 $14.25 $13.95 $15.50 $18.25 $19.75 $22.00 $24.25 $26.50 $30.50 $35.25 $45.25 $62.00 $68.50
Rotary files have a 1/4 shank and a double-cut (self-cleaning) burrs for quicker cutting speed and less chip build-up. Style: Cylindrical Radius End (SC-5). Diameter of cut: 1/2. Length of cut: 1. P/N 12-02917 .................... 2.95 Rotary files has a 1/4 shank and a double-cut (self-cleaning) burrs for quicker cutting speed and less chip build-up. Style: Round ball (SD-1). Diameter of cut: 1/4. Length of cut: 7/32 P/N 12-02918 .................... 2.95 High speed steel straight shank spiral flute chucking reamer. Diameter tolerance thru 1/2 diameter + .0002.0000. Decimal Equivalent: 0.0980. Shank Type: Straight Shank. Flute Type: Spiral Flute. Size Type: Wire Gage Size. Flute Length: 7/8. Overall Length: 3-1/2. Material: High Speed Steel. Size: 40. Type: Straight Shank / Spiral Flute. Number of Flutes: 4 Flute. Brand Name: Quality Import. Size 30 ................................................. P/N 12-02930 .................. $7.50 High Speed, Size 30 ............................ P/N 12-02931 .................. $5.50
1/8 Set ................................................. P/N 12-02916 ................ $26.95 1/4 Set ................................................. P/N 12-02915 ................ $58.95
The DD500X Pro Kit combines the Drill Doctor Tradesman sharpener with heavy duty carrying case. Sharpen bits either 118. or the high performance 135 setting and it can turn standard drill bits into self-centering, split point bits. Sharpens bits from 3/32 to 1/2 diameter in about 60 seconds and includes the patented E-Z align system and diamond grinding wheel for sharp precise results. Includes: Sharpener, 1/2 chuck, 110V power cord, carrying case, free video and easy to follow instructions. P/N 12-00673 .........$129.95
735
HAND PADS
Quickly remove carbon from pistons and valve stems. Great for light deburring head bolts and studs. One disc is flexible when run alone. Stack as many discs on at a time for the desired finish and removal rate. Safer than a wire wheel, with a much better finish. The very fine grade Bench Grinder Discs are packaged 10 to a pack, and the medium grade Bench Grinder Discs are packaged 5 to a pack. Max RPM 3,600 3,000 Part No. 12-00847 12-00849 Price $42.00 $39.50
Oxide abrasive wheel - fine abrasive for burr-free cutting of thin wall tubing and applications which require a fine finish. Wheel Size: 7" x 1/16" x 1/2" Max RPM: 8,700 Weight: 6lbs Standard Grades: A60TBE 3C14 P/N 09-02564 ....................$4.55
Save time and money with this generous assortment of our most popular types and grits of Straight Cartridge Rolls, in Coarse, Medium and Fine grades. Keep these Cartridge Rolls in your shop for a variety of hardto-reach applications. Essential tools for engine porting, including intake manifold, heads and exhaust manifold. Kit includes 1/4, 3/8 and 1/2 cartridge rolls, in 40 and 80 grit, and mandrels.... Metal Polishing Kit (3 Dia.) P/N 12-00846 .......... $48.25
Use dry abrasives only. Hose length - 10 ft.. Tank capacity - 90 lbs.. Strong tubular steel cart. Wheels - 6. Maximum 125 psi. 7 CFM@80 psi minimum. Lightweight and portable. Easy setup. Steel nozzles -13/64, 1/4, 5/16. P/N 12-02549.............$172.95
736
WP ME HA AP LG EP CS IN EL AV TO PS BV
Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile chuck-less drill attachment that could reach into very confined areas. The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1 x 2). Chuck slippage is all but eliminated while the precision mating angle between threaded drill and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced. The Model 00105 Kit includes: a versatile close-quarter Right Angle Drill Attachment capable of drilling up to 1/4 diameter holes and compatible with all standard power drills, a 6 Threaded Extension for those deep hard-to-reach spots, a Chucking Spud which allows direct use of threaded TightFit drill bits and extensions with your standard drill motor, five aircraft quality threaded TightFit drill bits (Short Drill Bit Set, 00133), a Tight Fit 3-Way Wrench, and is packaged in a red, heavyduty, blow-molded storage case. Features: Attaches to any power drill; Recommended operating speed not to exceed 2500 rpm. Light weight; Right angle drill weighs 1/3 of a pound and rotates 360 degrees for tightspot access. Threaded components allow for fast, easy tool changes; Drill over, under or around obstructions. Design allows deep reach in confined areas; Provides utility of extension drill bit set. P/N 12-01334 ................... $44.60
Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over drilling. Replaceable cobalt steel pilot drill, with split point tip design, to improve performance and resist walking; eliminates need for center punch. Size :7/8in. 22.2mm Min. Chuck Size:1/4in. 6.4mm PG 13 Coduit Size :1/2 Maximum Cutting Depth: 8 Ga. (4 mm) P/N 12-03715 ...................$27.25 The Blair hole cutter fits any 1/4 drill and set includes 7 blades (1/4 to 5/8 arbor), pilot and holder. The blades are threaded onto arbor and precise control of the depth of cuts is provided by adjusting screws. Over 3000 holes in sheet metal can be cut by each blade. Model TP147 ............P/N 12-00243 ...........$79.75 This is a companion tool to the ARC-360 lightning hole cutter. The Flanger-360 will form a 30 degree flange on 2024-T3 aircraft aluminum up to .032 thick and in diameters from 2 to 6 inches. Its polished hardened steel rollers gently and effortlessly form the flange as the operator rotates the tool around the lightning hole. Unlike other flanging tools that rely on the skill and eye of the operator, the Flanger-360 stays in constant position with the lightning hole via guide rollers as it progressively forms the flange. P/N 12-02030 .................$149.95 The UNIBIT Step Drill uses a unique single flute design to drill perfectly round holes in thin materials quickly and with less effort than any other bit on the market today. UNIBIT incorporates cutting steps of progressively larger diameter, making it possible to drill up to 13 different hole sizes with a single bit. Once the desired hole diameter is obtained, the hole is automatically deburred by the cutting edge of the next larger step. UNIBIT #1 drills 13 holes in 1/32 increments from 1/8 through 1/2 and has a shank size of 1/4. UNIBIT #2 drills 6 sizes of holes from 3/16 through 1/2 and has a 3/8 step thickness with a 1/4 shank. UNIBIT #3 drills 9 sizes of holes from 1/4 to 3/4 and has a step thickness of 1/8 with a 3/8 shank. UNIBIT #5 drills holes 1/4 - 1-3/8. 10 steps. UNIBIT #1 Step Drill .....................P/N 12-03700 .....................$22.85 UNIBIT #2 Step Drill .....................P/N 12-03800 .....................$22.85 UNIBIT #3 Step Drill .....................P/N 12-03900 .....................$45.25 UNIBIT #4 Step Drill .....................P/N 12-03164 .....................$48.75 UNIBIT #5 Step Drill .....................P/N 12-03750 .....................$94.65 Locking C-Clamp W/Swivel Pad, 6 In, Specifications: Size: 6", Capacity (In.): 2, Throat Depth (In.): 1 1/8, Clamping Force (Lb.): 500, Locking Mechanism : Release Lever, Screw Mechanism: Adjusts Clamping Pressure, Pliers Length (In.): 7 11/16, Finish: Nickel Plated, Material: Hardened Carbon Steel, Standards: ASME B107.36-2002 P/N 12-02422 .............$18.65
FLANGING-360 TOOL
ACCESSORIES
Stub Drill Kit - 5 Drills 9/16 long in 3/32, 1/8,5/32,3/16,1/4 Dia. P/N 12-20310 ................... $16.70 Short Drill Kit - 5 Drills 1-1/8 long, in same diameters as above P/N 12-20320 ................... $16.70 Long Drill Kit - 5 Drills 2 long in same diameters as above. P/N 12-20330 ................... $16.70 Screwdriver Set - #1 & #2 Phillips bits, small & large slotted bits. P/N 12-20340 ..................... $2.95 Extension Set - 4 Extensions in 1/2, 3 6 & 9 (can be combined for a work length of 18) P/N 12-20350 ................... $16.70 Collet Adapter - Designed to hold all 1/4 shank accessories (countersinks, rotary files, sanding drums). P/N 12-20360 .................... $6.70
737
These orange handled pinking shears keep your projects from unraveling at the seams. Ergonomic handles give comfort and control, extended lower blade to help lift fabric while cutting. Adds functional pinking edge to prevent fabric fraying. Tested to ensure clean cutting even through multiple layers of cloth to the tip. P/N 12-02942 ........................ $7.65
Although Kevlar has many advantages over conventional fiberglass weaves, it is very difficult to cut. Special scissors have been developed to facilitate cutting. These scissors have a wear -resistant coating which is metallurgically bonded to the steel substrate. The coating will not chip or peel off and can be sharpened. Model WR-10E-4 Shears .................... P/N 01-00341 ...................$72.50
ELECTRIC MODEL K-200 Extra-powerful 115V, 50/60 cycle AC/DC motor. Heavy-duty bearings & die-cast aluminum cutting head. Tool is UL and CSA approved. 2300rpm. Maximum cutting speed, 180 inches/minute. Wt. 5 lbs. Over-all length, 11.75. Ampere rating, 2.2 amps. P/N 12-01137 ........ $218.95 ELECTRIC MODEL K-442 Ketts all-purpose 16 gauge power sheers cut up to 16 gauge mild steel, cleanly and easily, without burring or buckling the material. These lightweight shears, designed for durability, feature a variable speed motor and fill the gap between Ketts light duty and heavy duty power shears. P/N 12-01153 ........ $257.95 PNEUMATIC MODEL P-500 Equipped with air-metering trigger for variable-speed cutting, so that initially the blade can be operated slowly to prevent chattering at start of cut. 2600rpm. Maximum cutting speed, 180 per min. Wt. 3 lbs. Over-all length, 9. P/N 12-01158 ........ $199.85
ECONOMY
KEVLAR
SCISSORS
GINGHER Scissors cut Kevlar exceptionally well. Lightweight, extremely sharp and comfortable, these 2 1/2 oz. scissors are perfect for use during the layup. Soak in acetone for easy clean-up. We recommend saving one pair for only cutting Kelvar, and keep ing a second pair for general use. P/N 01-00342 ...................... $44.65
High torque 2300 SPM motor lets you easily cut 18 gauge mild steel or up to 20 gauge stainless at over 150/minute. The swivel head gives you precise control as you make straight or contour cuts. The double-cut shearing action leaves a clean burr free edge and wont warp or bend the piece. Extended run time NiCad battery recharges quickly and theres room for a spare, and the charger unit, in the handy carrying case. Length: 12-3/4, Weight: 7 lbs. The kit includes the KB-301 power shear, KB-302 14.4 volt NiCad High Performance battery. KB-303 battery charger and KB-304 carrying case. Model No. KB-301-K KB-302 KB-303 KB-304 Description Cordless Shear Kit #300 14.4 volt NiCad Battery One Hour Battery Charger Carrying Case Part No. 12-00117 12-00118 12-00119 12-00121 Price $314.95 $61.25 $62.00 $26.30
From the makers of Vise-Grip tools comes the amazing new Quick-Grip bar clamp. The unique pistol-grip handle lets woodworkers hold the clamp and adjust jaw pressure with just one hand. One finger unlocks the Quick-release trigger. Features include positive locking action to hold work tight, strong, lightweight high-tech construction, instant adjustable clamping pressure, large, pliable pads that wont mar work, and a variety of jaw openings. It will single-handedly change the way you think about bar clamps! Jaw Opening Size (mm) 12-03910 6/150 12-03920 2/305 12-03930 18/455 Part No. Price $21.50 $29.75 $35.75 Jaw Opening Price Size (mm) 12-03940 24/610 $35.95 12-03950 36/915 $35.75 Part No.
Cuts 14 gauge mild steel and most grades of stainless to 16 gauge. Cuts over 150 inches/ minute, leaving a clean, flat sheet, ready to fabricate. Distortions are absorbed in an easily disposed of waste curl, leaving the sheet cool and free of burn, chips, and burrs. The cutting blades are finest high speed steel. (Also cuts sheet metal, Stainless and Plastics) P/N 12-00676 ..................$229.95 Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. Can cut tight curves at a radius of three inches. The blades are made of high quality steel, heat treated and precision ground. The motor is variable speed up to 2500 RPM and cuts up to 28 feet per minute. Features: 5.0 amp pistol grip Replaceable A-2 tool steel shear blades. These snips cuts C.R. mild steel 18 gauge and lighter, wire mesh to 18 gauge, spiral pipe, metal studs and corrugated metal Right Hand ......................................... P/N 12-02507 ..................$259.85 Left Hand ............................................ P/N 12-02509 ..................$259.85 The Mini-Electric Cordless Cutter is perfect for all-purpose cutting needs. It slices through all fabric, paper, and leather materials easily. It features a cordless, rechargeable system and can also operate with AC power. The shear is a lightweight and easy-to-use industrial cutting tool. Great for cutting materials like Kevlar, Carbon fiber, glass fiber, Zylon and other composite materials up to 1/8 thick. Kit Includes: All-purpose blade, AC Adapter, Rechargeable DC Battery, Charger / Power Cord, Shoe base head P/N 12-02525 ..................$145.95
Cuts sheet metal like punch and die. Cuts holes to any size and shape. Start with 7/16 hole then nibble to size required. Capacity 18 Ga. steel. Wt. 8 oz. ....................... P/N 12-10400 .....$28.65 Replacement Punch ..... P/N 12-10500 .....$14.75
These special pliers allow for greatly simplified installation of single or multiple Adel type cushioned clamps. The pliers securely hold the aligned clamps in position, allowing for easy installation of securing hardware. Each kit includes special plier, alignment awl, and simple instructions. P/N 12-02017 .......................$34.75 Precision slots on this spring steel tool slide onto and capture #8 or #10 screw threads while assembling Adel type clamps. Use two tools to butterfly one clamp on top of another. .................................. P/N 12-02588 .....$12.65
The USATCO cordless electric kevlar scissor kit cuts aramid fibers, kevlar and other tough materials! Lightweight and maneuverable with superior ergonomic design. Requires much less effort than cutting manually. Short rapid strokes for intricate work. This can be operated with cord and adapter for unlimited cutting time. P/N 12-02630 .............$149.95
738
Easy glide large and small racks are designed to accommodate large and small compartment boxes and create convienent, compact storage systems. Boxes can be removed and tranported to the job site. Rugged plastic inserts and scoop bottoms fit neatly into steel outer shell boxes. Optional bases raise racks off the floor. Compartment: 21 Weight: 8 lbs Material: Prime cold rolled steel Interlocking and Welded Construction Colors: Durable gray powder coat finish Depth: 12 Height: 3 Width: 18 P/N 12-02622 .................$24.25
The innovative Form-A-Funnel has literally hundreds of uses. For aircraft owners, it makes aircraft oil servicing a breeze. The larger model (18611) was designed to be formed into a channel that can be easily inserted into your engine compartment, weaving its way past engine accessories and into a snug position under your oil filter. After loosening the filter, the oil drains to a position outside your cowl, preventing the messes that usually occur, and keeping oil off the inside of your cowling (and off the hangar floor). The flexible material holds its shape -- you can bend it around the surrounding structures in your engine compartment and it will support itself. The Form-A-Funnels flexible lip seals against the engine case or drain port, ensuring that not a drop is spilled. No more improvised cardboard channels, and no more bulky and hard-to-clean plastic funnels! The smaller model (18609) is perfect for small engine repair or servicing, automotive work, changing the oil in your air compressor, draining and pouring fluids or granular material, creating all kinds of funnels, and making improvised pans and fluid channels. Form-A-Funnel is constructed of a thin layer of flexible metal covered with a tough outer layer of Nitrile rubber. Its reusable and will last for years. It cleans up with just a wipe, and you can store it rolled up or flat. No other funnel can go in your pocket or in the drawer of your toolbox! It resists all common aviation and household chemicals, including oil, fuel, hydraulic fluid, transmission fluid, antifreeze, battery acid and solvents. Form-A-Funnel is one of the most clever tools youll ever own! 14.5 X 6.5 .............................. P/N 12-03147 ............................. $19.95 29 X 5 .................................... P/N 12-03148 ............................. $29.95 With stainless steel components and an aluminum body, this tool was designed for the outdoors man, fisherman and farmer who would have it around a corrosive environment. The stainless steel components are stronger and you can just toss it in the tool box that is in the truck, boat or tractor. The tool is great for emergencies and tough wire jobs. This is the original marine grade tool. 4 3/4 Long - 7 Fully Extended P/N 12-02633 ............................. $39.95 Plated steel components with aluminum body. This tool was designed with the mechanic in mind who would have it around grease, oil and a controlled environment (non corrosive). Great for the CV boots, fuel line, thermostat housing, radiator hose and air hose type repairs. 4 3/4 Long - 7 Fully Extended P/N 12-02634 ............................. $29.95 This tool is machined stainless steel with a one piece body and nose and bronze nut. The tool was designed with the detailed craftsman who need a long lasting tool able to hold up to extremely tough wire while clamping, binding and pulling the wire until the job is complete. 4 3/4 Long - 7 Fully Extended P/N 12-02632 ............................. $69.95 Easier to use than regular C-clamps. Quickrelease style. Removable rubber pads on each screw. Gap: 1 1-1/2 Reach ........... P/N 12-02863 ........$14.65 1-1/8 Reach ........... P/N 12-02864 ........$17.95 1-3/4 Reach ........... P/N 12-02865 ........$22.50 The Screw & Bolt Shear is a bolt cutting device manufactured from very high quality tool steel which is hardened, tempered & machined to very close precision tolerances. The action of this tool is similar in nature to a guillotine design and is quite effective in cutting screws/bolts to specific lengths. The cutting body of the SBS-1 will accommodate screws or bolts in sizes of 4-40, 6-32, 8-32, 10-32, 10-24, 1/4-20 & 1/4-28. P/N 12-14250 ........$98.90
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
CLAMPTITE TOOLS
Easy glide large and small racks are designed to accommodate large and small compartment boxes and create convienent, compact storage systems. Boxes can be removed and tranported to the job site. Rugged plastic inserts and scoop bottoms fit neatly into steel outer shell boxes. Optional bases raise racks off the floor. Compartment: 32 Weight: 8 lbs Material: Prime cold rolled steel Interlocking and Welded Construction Colors: Durable gray powder coat finish Depth: 12 Height: 3 Width: 18 P/N 12-02621 .................$24.25
Easy glide large and small racks are designed to accommodate large and small compartment boxes and create convienent, compact storage systems. Boxes can be removed and tranported to the job site. Rugged plastic inserts and scoop bottoms fit neatly into steel outer shell boxes. Optional bases raise racks off the floor. Weight: 20 lbs Material: Prime cold rolled steel Interlocking and Welded Construction Colors: Durable gray powder coat finish Depth: 15 Height: 8-1/8 Width: 20 P/N 12-02624 .................$81.75
TOGGLE CLAMPS
Rack base (20 5/8 W X 15 5/8 H X 12 5/8 D; weight 13 lbs.) is available for use with PN# 12-02626. Weight: 13 lbs. Material: Prime cold rolled steel Colors: Durable gray powder coat finish Depth: 12-1/8 Height: 151/8 Width: 20-3/8 P/N 12-02627 .................$42.75
A multi-functional revolutionary new tool for measuring angles and pitches. Its rare to find one tool that will accomplish so much (miter cuts for one and duplications for another). Use this one-in-all tool to compliment and enhance your tool box. P/N 12-02458 ........$28.95
739
TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The PRO-CRIMPER II Hand Tool provides the versatility of general-purpose service of generalpurpose service tools along with the reliability and ease of use of many premium-grade tools For versatility, 75 die sets (available separately) are interchangeable, including those for open-barrel contacts and terminals. Additionally, many of these die sets have multiple cavities for crimping a variety of contact or terminal sizes. For reliability, the tool is constructed of durable high carbon steel with extra-strength pivot pins. And, for user convenience, the PRO-CRIMPER II Hand Tool particularly excels. Ratchet control is provided for complete crimp cycling; this helps eliminate partial crimps. Also, an emergency ratchet release allows the user to open the tool jaws at any time during the crimp cycle.To reduce handle force, the linkage was designed to match the forces required to crimp our largest insulated terminal. The result is dramatically less hand force than comparable tools. Also, the angled had and specially designed handles provided comfortable operation. Locator are mounted on pin-and-socket style tools They help properly locate the contact in the die set, provide a wire stop, and help minimize contact rotation and bending during crimping. PROCRIMPER II 58433-3 ..............P/N 12-01379 .......... $174.95 O-CRIMP DIE 58435-1...................P/N 12-01380 .......... $173.95 HEX CRIMP DIE 58436-1 ..............P/N 12-01381 .......... $188.95 PIN & SOCKET 58495-2 ................P/N 12-01382 .......... $169.95
Amp right angle dual crimp tool. Features: RF Connector, Gender Plug. Dual Crimp, Right angle body, Waterproof, Without Solder Terminal, without Military Grade, Teflon material, Without Mechanical Attachment Panel Mount. Connector Impedance (Ohm) is 50. Coaxial Cable Termination Type is Crimp. Body Plating is Silver. Center Contact Plating is Gold. Coaxial Cable Type (RG/U or Mfg.) is 214, 9, 9A. Government/Industry Qualification - No. RoHS/ ELV Compliance is Not ELV/RoHS compliant. Lead Free Solder Processes is not relevant for lead free process. P/N 11-10006 ................$148.75
Since the invention of stainless braided hose, racers and mechanics have been fighting the problem of installing it into the socket part of the assembly. If your lucky and get a clean cut on the end of that hose, you might get it in. Most of the time a little fuzz appears on the hose end and the battle begins. It is not only time consuming, it can get bloody. This tool is the solution that makes the assembly a snap. Manufactured of a high tech composite, it is virtually indestructible. No need to worry about vise marks or wearing out. Just insert the socket into the tool, twist the hose in, and in less than 10 seconds you have it assembled. You can repeat this several times without recutting the hose end. The tool can pay for itself the first time you dont have to scrap some hose because it got too short trying to clean up the end. Youll be amazed at the amount of time youll save. SMALL KIT - The Small kit contains the capsules to install -4, -6, -8 hose into their respective sockets. To accommodate all the different manufacturers fittings, spacers and sleeves are required to tighten up the some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit in the funnel. The two spacers are used in some -6s and 8s. If the socket seems loose in the tool, use a spacer to tighten it up. In the small kit, only the Russell -4 needs a sleeve. Not for use with Teflonstyle hose. PN 12-01061 ........... $73.95 LARGE KIT - The Large kit contains the capsules to install -10, -12, -16 hose into their respective sockets. To accommodate all the different manufacturers fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. In the 1016 kit, all the -16s except Russells require the sleeve and a rear spacer. See the instructions in the case for the proper spacer number. Most of the -10s and 12s* will use a spacer. Not for use with Teflon-style hose. * -12 is a stainless washer. PN 12-01062 ........... $88.85 HOT ROD KIT - The Hot Rod kit contains the capsules to install -6, -8, -10 hose into their respective sockets. To accommodate all the different manufacturers fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. Spacers are used in some -6s, -8s, and most -10s. If the socket seems loose in the tool, use a spacer to tighten it up. See the instructions in the case for the proper spacer number. Not for use with Teflon-style hose. PN 12-01898 ......... $110.95 THE PRO COMBO - The Pro Combo is a special offer of BOTH the #468 and #1016 kits listed above. Pros need both kits to handle all the hose sizes in a race car. Ordering this combination will save $15.00. Not for use with Teflon-style hose. PN 12-01897 ......... $147.50
The Express Toner/ESD Vacuum provides .3 micron filtration which captures particles that are less than one one-hundredth the thickness of a human hair. This means these vacuums will do a thorough job of cleaning planes of the smallest particulates like mold spores, chemicals, foreign substances or any other microscopic particles that could be hazardous on a plane. Additionally its light weight (about 6 pounds) makes the Express Vacuum easy to move into and around the interior of an airplane. Plus it is the only product in the market of this nature which is ESD safe, this is of great importance given all the delicate electronic equipment which is found on todays airplanes. Note: Bag is optional and may be purchased separately. Features: 600 Watt Flow Through Motor 6 ESD safe hose Crevice tool and brush 12 Flexneck tool .3 micron toner cartridge filter Line filter 12 power cord ESD SAFE Toner/ESD Vacuum 110V .................... P/N 12-01058 ................$143.95 Toner Toner Filters 2 Pk. ..................... P/N 12-01059 ..................$23.25 Vacuum Carring Bag ............................ P/N 12-01454 ..................$23.25
6 Koul Single ..................... PN 12-01928 .................. $29.50 8 Koul Single ..................... PN 12-01929 .................. $29.50 10 Koul Single .................. PN 12-01930 .................. $29.50
KOUL SINGLES
Now you can solve Continental fuel injection problems for both naturally aspirated and turbocharged engines right on your customer's airplane. With the patented Porta-Test Testing Unit from Approved Aircraft Accessories, Inc., you can accurately and easily comply with the manufacturer's service bulletins relative to fuel pressures, flow, and turbo components. Porta-Test is the only approved testing unit available for the calibration of fuel injection systems. As a result, you can quickly perform fuel metering maintenance to improve the service life, performance and dependability of engines equipped with Continental fuel injection systems. Actual flow meter readings provide exact indication of engine fuel consumption as well as pressure. Indications covering unmetered and metered fuel pressure, turbocharger upper deck and lower deck pressures can be easily checked for correct operation. All troubleshooting can be accomplished with the engine running and without removing components to save valuable man hours and downtime. Complete operator's manual contains necessary specifications and troubleshooting. The 20 ATM consists essentially of a patented high-accuracy fuel pressure gauge to measure both metered and unmetered fuel pressure; two flowmeters, one with a range to cover idling - low flow - and the other to cover power settings; a dual absolute pressure gauge indicates manifold and turbo discharge operations; and the appropriate valves, hoses, and fittings. P/N 08-07225 ...............$5,375.00
740
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Dial Type Wrenches provide unmatched reliability, accuracy and durability for applications where torque measurement is extrememly critical. Models feature a memory pointer that indicates the highest torque achieved during application of torque. 2% accuracy clockwise and counterclockwise. All wrenches are made in the USA of all steel construction for the highest quality. Both models come with a plastic storage box and a calibration compliance certificate. 3/8 sq.dr. / 300 lb.in.....................P/N 12-00531 ......$199.95 3/8 sq.dr. / 600 lb.in.-50 lb. ft. .....P/N 12-00532 ......$199.95
Engineered, precision bearing surfaces extend the calibrated life of these micrometer torque wrenches to as many as 60,000 cycles or more and ensure the most reliable performance possible. In addition to flawless operation at release, calibration is completely external, unlike traditional mechanism that require disassembly and the replacement of blocks and shims. Both models come with a plastic storage box and a calibration compliance certificate. 3/8 sq.dr. / 30-200 lbs. ft......P/N 12-00533 ...... $197.00 3/8 sq.dr. / 20-100 lbs. ft......P/N 12-00534 ...... $197.00
The universal system for interior construction and renovation with the basic accessories for the most common applications. Kit Includes: 1 FEIN Multimaster FMM 250, 1 backing pad, 20 sanding sheets (5 each of grits 60, 80, 120, 180), 1 Universal E-CUT saw blade (1 3/4 in), 1 HSS segment saw blade, 1 rigid scraper blade, 1 wrench and mounting bolts, and 1 tool case. Weight: 2.6 lbs. P/N 12-02962........................ $248.00
STP Wire Stripping Problem Background: From the beginning, Mil-Spec Tefzel Shielded Twisted Pair wire has defied every wire stripper available to installers, leaving a razor blade or knife as the best option for removing the outer jacket. This time consuming method is imprecise, and it can easily lead to internal shorts between the center conductors and the shield, especially when solder sleeves are used for shield termination. With the increased use of RS-232, ARINC 429, and other types of data busses in todays aircraft electronics, this type of wire is now a major component of many avionics installations. Stop the Razors Hidden Damage Ring and slit. That has been the standard way to remove twisted pair jackets since the introduction of this type of wire. This time consuming and innacurate process has obvious disadvantages when compared to the TS-7000: P/N 12-02031 ............$1,237.00 Accu-Tap delivers professional results with every use. Align Accu-Tap using the specially designed sight gauge. The high visibility cross hairs ensure that you will not miss your mark. The v-block makes it easy to drill round stock and tubing and also works on any flat surface. With a flip of a switch, 180 pounds of force is activated in the unique magnetic base securing the guide in the exact location that you need. Simply select the desired drill bushing and insert into Accu-Taps locking liner. Grab your favorite drill and see the results unfold. Accu-Tap delivers results within .001. P/N 12-01871........................ $248.95
SK-4P3 CLoc Pliers (PN# SK-4P3) A must to install CLoc or Camloc 4000 Series studs into grommets. Also handy to install 2000 Series Studs, including winged studs. Cushioned grip handles. Grip jaws are milled precisely to fit 4000 Series cups perfectly! P/N 08-07224...............................$74.85
SK-SP5 SKYBOLT CLOC TOOL (PN# 08-07210) - Specifically designed to preset and adjust CLoc 4000 Series Adjustable Receptacle and Mounts. Locking Sleeve can be set for known panel thickness to preset SK215, SK245, and SK2003 Dash 5 Series receptacles. With stud removed from grommet in outer panel, tool may be inserted into the receptacle to unlock and adjust insert without even seeing the insert. Positioning sleeve to the opposite end of tool, it becomes a T26 Tool for installing grommet retainers. SK-SP5 CLoc Tool ......................................P/N 08-07210 ...........$39.90
Great for radiator and heater hose, vacuum and fuel lines. Tested to 50,000 cycles without failure for reliable performance. Patented clamping mechanism - No adjustment needed -- Simply squeeze to lock Cushion handgrips for comfort and control. Available in three
sizes. Made in U.S.A. Hose Pinch-off Pliers 1-14 OD Cap. .........P/N 12-00524 ...........$19.50 Hose Pinch-off Pliers 2-12 OD Cap. .........P/N 12-00525 ...........$25.75 Hose Pinch-off Pliers 3/4 OD Cap. ............P/N 12-00526 ...........$13.95 Specially designed for applying and removing spring hose clamps.The recesses in the jaws grip the ends of the spring so it cannot slip or twist. Grips with either end or side of jaws for reaching into tight places. P/N 12-01154 ...........$18.95 This tool allows you to put bolts in tight areas. The tool was designed to install the bolts in an aircraft elevator, however this tool has many other uses. The tool is 1/2" wide 5-3/4" long with a 3-1/2" reach. It can be used for fasteners from #6 to 5/16" diameter. The tool is made of 100% stainless steel for strength and appearance. P/N 05-04384 ...........$28.75
Easily access long narrow openings with minimal handle movement. Longest narrow reach available 13.00 .................... P/N 12-01339............ $28.75 12.75 .................... P/N 12-01340............ $21.75 12.62 .................... P/N 12-01341............ $21.75 All 3 Set ................. P/N 12-01342............ $72.25
741
This handy kit enables you to safety wire any nuts or bolts on an airframe or engine. Just place the special washers under the bolt or nut, bend up the small flanges to hold the bolt or nut in place, and then use the tab of the washer to attach the wire to a solid point so the bolt cannot move. This kit works on the same principle as drilled bolts do and is very handy for those flying with an engine that does not have safety wired nuts and bolts. Excellent for use on 2 stroke engines. Package of spare washers includes 6 ea. of: 6, 8, & 10 mm sizes. Safety Wire Starter Kit ............................... P/N 12-16625 ...... $18.75 Package of 18 Spare Washers .................. P/N 12-16626 ........ $6.75
Since the introduction of Saf-T-Bloks in 1981, theyve helped thousands of mechanics by taking the headaches and hassle out of drilling safety wire holes in bolts and nuts. This easy to use Saf-T-Blok holds the bolt steady after you thread it in to the required depth. You then drill the hole through the center with no risk of misalignment. Saf-T-Blok is available in 4 sizes:
Description Part No. Price Standard: (6 Thread Size) 1/4, 5/16, 3/8 USS & SAE 12-15345 $28.70 Metric: (5 Thread Size) 6x1, 8x10, 8x1.25, 10x1.25, 10x1.5 12-15346 $28.80 Aero: (5 Thread Size) 8-32,10-32, .25x20, .25x28, 5/16 x 24 12-15347 $28.70
AERO SAF-T-BLOKS
These top quality twisting lock pliers with automatic return are economically priced and extremely durable. Features a sharp cutting edge and will twist up to .060 dia. safety wire. Length 6& 9. Foreign made. 6................. P/N 12-01472 .......$19.90 9................. P/N 12-01473 .......$19.75
Designed to enable safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal. Designed to accept up to 3/4 dia. nut. Easy to use. Nut Saf-T-Blok requires that the nut or bolt be placed into the V groove, tighten down the holding screw, drill & deburr. P/N 12-15349 ...... $31.50
NUT SAF-T-BLOKS
These top quality twisting lock pliers with automatic return are reversible, economically priced, and extremely durable. Features a sharp cutting edge and will twist up to .060 dia. safety wire. 6-INCH .......................P/N 12-02828 .......... $48.75 9-INCH .......................P/N 12-02829 .......... $49.85
New from MTE industries the Allen SafT-Blok2. Design for all socket head cap screws Metric and SAE. With an added plus can be used as a tubing drill guide. As with all the Saf-T-bloks, this takes the headache and hassle out of drilling safety wire holes. P/N 12-02407 ...... $29.95
Contains 6 Safety Wire Twister and 19 Chrome Adjustable Safety Twister Tool. P/N 12-01680 ..........$99.95
The most versatile kit available. Contains three different SafetyTwist Pliers to cover almost any application: 9 Automatic (1W393), 6 Mini (9W) and a 19 Deep Reach Twister (13W). Includes three 1/4 lb. spools of stainless steel safety wire (.020, .032, .041). Durable plastic storage case. Kit weight 4 lbs. P/N 12-02020 ........ $173.95
These kits include professional safety wiring kit for all applications. Contains 9 automatic standard twister, 6 safety wire twister, made of hardened alloy steel-black oxide finish plus (3) 1/4 lb. spools of annealed stainless steel safety wire. (Sizes: 020, 032, 041). Model 100 also includes 19 chrome adjustable safety wire twister (for cavity and deep access applications. Model 200 .......... P/N 12-16650...........$93.75 Model 100 .......... P/N 12-00336.........$129.00
04-134SR - Safety Wire Twister 04-134SR6 Safety Wire Twister - Mini 43-025 - Stainless Steel Aircraft Safety Wire 43-032 - Stainless Steel Aircraft Safety Wire 43-041 - Stainless Steel Aircraft Safety Wire Kit Box 13 P/N 12-02350 .......... $64.75
This new tool attachment provides quick and precise twisting of safety wire using Skill or Black & Decker type cordless screwdrivers. Just attach the adapter to the screwdriver, insert wire and you will have a neat, tight, easy wire twist. Works perfectly in a wide variety of applications (particularly twists in tight spaces). Available exclusively from Aircraft Spruce & Specialty Co. P/N 12-20800 ..........$21.95
An excellent tool for different access situations, this twister provides a deep reach and access to close quarters. Made in U.S.A. P/N 13W .................. $35.85
SPECIALTY TWISTER
Easy one-hand operation. Reaches into tight places, makes a fast, neat twist. Shatterproof plastic handle. P/N 12-01072 .........$16.50
This tool provides a fast, simple way to drill bolt heads with virtually no broken drill bits. The tool is made of 6061T6 hard anodized aluminum for durability. Fits 3/16 to 5/8 dia. bolts and works on hex head bolts, header bolts, 12 point countersink and Allen head cap screws. Includes drill bushings and two cobalt drills. Made in U.S.A. P/N 12-16600 ..........$59.95
742
KLEIN TOOLS
Klein wire strippers and cutters cut, strip, gauge and loop a wide range of wire types and sizes. Made of strong, hardened steel with comfortable handles, these tools are durable and long lasting.
STRIPPER/CUTTERS
Solid and Stranded. Double-dipped comfort grips with curved handles, cuts, strips, loops and gauges 10-18 AWG solid wire and 12-20 AWG stranded wire, cleanly shears 6-32 & 8-32 screws, coil spring provides fast, self-opening action. P/N 12-00235 ...................$19.75
Designed and built with exceptional quality standards in a tradition that dates back to 1857. Klein specializes in the making of the worlds finest pliers, for the professional. What makes Klein pliers different is induction hardening of cutting edges, pliers head hardness, hot riveting and special handle hardness.
PLIERS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
D228-8 KLEIN 8 DIAGONAL-CUTTING PLIERS - High-leverage, standard-bevel cutting knives, with hand-form style plasticdipped handles. P/N 12-00228 .......... $24.85
Solid and Stranded. Double-dipped comfort grips with curved handles, cuts, strips, loops and gauges 20-30 AWG solid wire and 22-32 AWG stranded wire, cleanly shears 6-32 & 8-32 screws, coil spring provides fast, self-opening action. .................................................. P/N 12-00236 ...................$18.90
Strips 10 to 18 AWG solid wire, easy-to-read wire gauge markings, comfortable handles with cushion ridges. ................ P/N 12-00233 ...................$14.75
Strips 16 to 26 AWG stranded wire, easy-to-read wire gauge markings, comfortable handles w/cushion ridges ............. P/N 12-00234 ...................$12.95 This lightweight Klein-Kurve wire stripper-cutter strips large gauge 6-12 AWG stranded wire and eliminates the need for a skinning knife. The tool clearly shears 6-32 and 8-32 screws and has a serrated pliers nose, which allows the user to pull, grip, and twist wire design adn double-dipped textured grips provide control and comfort. P/N 12-01456 .................... $9.25 Designed with 3 different cutting blades; anvil cutter, a copper curved cutter & a steel cutter. Cleanly shears 6-32 & 8-32 screws, doubledipped comfort grips with curved handles, coil spring provides fast self-opening action. P/N 12-00496 ............. $22.85
D202-5 KLEIN 85/16 DIAGONAL-CUTTING PLIERS - With tapered nose, standard bevel
cutting knives, plastic-dipped handles. P/N 12-00232 .......... $23.50
White canvas bag with strong zipper, convenient storage for tools, 7.5 x 12 overall size. P/N 12-00239 .......... $10.75
Klein Tools added its new QTR-Turn NM cable stripper/cutter with Klein-Kurve handles to its existing line of strippers and cutters. The QTR-Turn technology allows users to place cable in the upper jacket strippers, squeeze the handle, and turn one-quarter to completely sever the outer jacket. It utilizes spring-loaded action for self-opening. ........................................ P/N 12-01770 .................. $17.95 Cuts up to 1 diameter aluminum and copper coaxial cable, curved jaws firmly grasp cable, shear-type cutting blades, precision, one-hand shearing action. .................................. P/N 12-00497 ..................$39.25 This tool is designed to crimp insulated and noninsulated 10 to 20 AWG solderless terminals & connectors. It has easy-to-read tool markings to identify the insulated or noninsulated crimping dies. Its tapered nose design works well in tight places and has specially hardened cutter in th nose for quick, clean cuts. Size: 9.75. Lifetime warranty.............. P/N 12-00698 .................. $36.50 Unique screw-holding design in which screws are held at the tip of drivers for precise placement in tight, hard-to-reach places and allows both torquing and tightening of screws. Starts and drives screws with one hand when working in hardto-reach spaces. 1/4 Slotted ..........P/N 12-02702 ......$9.85 1/4 Phillips ..........P/N 12-02701 ....$10.80 Adjustable blade tension of up to 30,000 PSI for fast, precise cuts, along with soft touch grips for comfort. The alternative 45-degree mounting is perfect for flush cutting, and theres a front mount for reciprocating saw blade. Theres a space to store your blade in the handle, and it comes with a 12 x 24 TPI bi-metal hacksaw blade and 6 x 24TPI bi-metal reciprocating saw blade....................... P/N 12-02641 .................. $23.25 6 Replacement Blade ......................... P/N 12-02705 .................. $17.35 24 Replacement Blade ....................... P/N 12-02706 .................. $23.95
The professional requires a number of nut drivers in a variety of sizes and types. Klein drivers feature convenience, comfort and efficiency in use, plus exceptional strength and durability. All Klein nut drivers are made of the highest quality tempered steel, carefully heat-treated for maximum strength.
NUT DRIVERS
631 KLEIN 7-PC. CUSHION-GRIP NUT DRIVER SET - Contains 3/16, 1/4, 5/16, 11/32, 3/8,
storage pouch. 7/16, & 1/2 hollow-shaft nut drivers, roll-up plastic P/N 12-00238 .......... $51.25
CRIMPING/CUTTING TOOL
KLEIN TIP NUT DRIVER SET 7 -PC SET - Full Hollow Shaft design with
Rare Earth magnetic tip. (Only with P/N 12-01594). Full hollow shafts facilitate work on long bolt applications. Cushion Grip handles allow for greater torque and comfort. Handle domes are color coded for easy identification. Internal flanges provide solid, twist-resistant shaft anchor. Chrome plated shaft helps prevent corrosion. Set contains Cat. No. 646-3/16M, 646-1/4M, 646-5/16M, 646-11/32M, 646-3/8M, 646-7/16M, 646-1/2M. Klein nut driver 7pc. set ....................P/N 12-00306 .....$49.95 Klein driver 7pc Magnetic Set...........P/N 12-01594 .....$88.75
743
TOOLS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Klein Hole Saws feature bimetal cobalt construction which allows for heavy-duty cutting; they can cut through studs in one pass. They also have multiple knock-out slots and holes for easy core removal. Carbide grit hole saws work well for cutting abrasive materials and offer a smooth cut with minimal tear-out. Electricians Hole Saw Kit Contains the most popular sizes for basic electrical work. Hole Saws: 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 Arbors: 7/16 (qty.2) P/N 12-00969 ................... $88.75
JOURNEYMANS HOLE SAW KIT - The most frequently used sizes and
an arbor extension for hard to reach spots. Hole Saws: 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Arbors: 1/4, 7/16 (qty.2), arbor extension P/N 12-00970 ................. $129.95
MASTER ELECTRICIANS HOLE SAW KIT - Includes the most commonly used saws and arbors. Hole Saws: 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2, 3, 3-5/8, 4-1/8, 4-1/2 Arbors: 1/4, 7/16 (qty.2) P/N 12-00971 ................. $172.95 LARGE SIZE HOLE SAW KIT - Contains necessary sizes to upgrade a basic hole saw kit into a master set. Hole Saws: 3, 3-5/8, 4-1/8, 4-1/2 Arbors: 7/16 P/N 12-00972 ................. $109.95
Designed for beginner and experienced wirers, these tool sets range in size from a basic 14-piece assortment to the 41-piece comprehensive collection. Each set contains Klein premium products, such as wire stripper/cutters, screwdrivers, and pliers, plus protective eye wear and a pouch or tool bag for toting and storage. Each set offers a cost savings when compared to buying the tools separately. Tools in Electricians sets have standard handles. Tools in Journeyman sets have state of the art dual-material handles which provide a superior grip without sacrificing tool strength or durability. 14-Piece Electrician Tool Set ......................P/N 12-00819 .........$218.95 18-Piece Journeyman Tool Set ...................P/N 12-00821 .........$298.95 28-Piece Electrician Tool Set ......................P/N 12-00820 .........$355.95 41-Piece Journeyman Tool Set ...................P/N 12-00822 .........$663.00
Have you ever tried to push grease in through a grease fitting and couldnt? The Grease Joint Rejuvenator opens clogged grease joints and fittings effortlessly in less than a minute! Opens clogged grease fittings & joints Cleans and replenishes old and dirty grease fittings Loosens dried grease in joints Cleans ways and stays in milling machines and lathes Lubricates bearings on farm, lawn & construction equipment. How it works: Remove the piston end and fill the tool with penetrating oil. Then place the end over the grease fitting and tap on the piston head with a hammer until it starts to move down into the tool body. The hydraulic pressure created by tapping on the piston forces the penetrating oil into the grease joint where the blockage is and loosens the old hardened grease (or dirt), flushing the blockage and clearing the way for new grease Grease Joint Rejuvenator (Pro Model)........P/N 12-01038 .......... $34.95
This portable, hand-operated roll type swaging machine will swage MS type terminals onto galvanized and stainless steel cables from 1/16 diameter up to and including 3/16 diameter. Includes machine, a full set of roll dies, terminal gauges and feed guide adapters & instructions in a steel carrying case. Wt. 95 lbs. New manufacture. All replacement parts available. Special order P/N 12-01188 ..... $6,397.00
KEARNEY SWAGER
No more burning your fingers and hands! Just Listen! Insert Whistle Alert into any 14mm spark plug hole and bump the engine until you hear the whistle. You are now on the compression stroke! Easily find Top Dead Center compression stoke Turn engine over from inside the car and listen for the whistle. Made of steel and aluminum Made and assembled in the USA. Whistle Alert (Rigid)...........................P/N 12-01039 .................... $15.75 Whistle Alert (Flex) ............................P/N 12-01041 .................... $12.65
This tool is used for setting the tension on flying wires from 1/4 - 1/2. Tension ranges from 200 lbs. to 2400 lbs. Can also be used for setting drag, anti-drag wire tension. Ideal for use on Stearmans, Wacos, and Pitts, etc. To use this tool you will need a torque wrench. P/N 12-12500 ......... $244.50
This new tool is suitable for loosening and tightening threaded locking collars of electrical connectors without marring the gripping surfaces of the collars. Excellent for use on AN and MS connectors, plated pipe and fittings, plastics, glass and ceramics. The soft jaws will not crack or chip plating. Ideal for rod, tube or sheet. Grip Range: 3/4 to 2-1/2 dia. Made from heat-treated steel with black oxide finish. Meets government. Specs. American Made. P/N 12-16800............$21.50
The Engine Calibration & Set-up Kit gives you innovative tools that help eliminate mistakes when setting up mechanical engine timing sequences, timing chains, timing belts, balance shafts and belts, distributor installations and general engine set-up. Kit includes: Standard 6 (14mm) and Extended 10.75 (14mm) TDC Indicators Compression Gauge Extension Compression Whistle Alert Crank Stopper 18mm & 12mm Spark Plug Hole Adapters, extra nipple for compression tube to whistle conversion. Engine Calibration & Set-Up Kit ......... P/N 12-01040 ................ $111.95
744
3M ORBITAL SANDERS
CM WP
The all new line of 3M air-powered finishing tools includes innovations designed to optimize performance and productivity. 3M Tools are designed for smooth operation, and are packed with horsepower. Multiple grip sizes are designed to provide advanced operator comfort, and colorcoded levers allow for easy orbit identification. The 3Ms NEW dust management sysRANDOM ORBITAL SANDERS tem featuring Clean Sanding Abrasives and Accessories is revolutionizing the dust evacuation process. Discs are designed to cut more and last longer. The patented multi-hole pattern captures Non-Vacuum Self-Generated Model Vacuum Model and remove more dust compared to 5or 6-hole products. Tool Airflow Orbit Dia. VacuMax Motor Rate Model Dia PN Price Inch um RPM HP (W) SCFM Inch (mm) (LPM 20316 3(77) Yes 3/32 12,000 .28(209) 17(481) 05-03482 $192.95 20319 5(127) Yes 3/16 12,000 .28(209) 17(481) 05-03483 $228.95 20314 3(77) No 3/32 12,000 .28(209) 17(481) 05-03485 $229.00 20317 5(127) No 3/16 12,000 .28(209) 17(481) 05-03484 $211.95 Accessories PN Price
ME HA AP LG EP CS IN EL AV TO PS BV
SteelMax brand drills maintain rigidity and accuracy throughout the life of the drill. The rail system eliminates the need to adjust or maintain traditional gibs. In addition to saving on maintenance, cutter life is increased by reducing movement at the cutter tips. When cutters last longer, you save money every day you use SteelMax! Magnetic Base Drill ...................P/N 12-01718 ....$1,398.85 Portable Magnetic Drill ..................................P/N 12-01811 .......$999.95
05-03486
$5.50
An aluminum oxide Hookit disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern. Model 6P120 5P500 5P400 5P320 5P240 5P220 5P180 5P150 5P120 3 P80 3P500 3P400 3P320 3P240 3P220 3P180 3P150 3P100 Part No. 05-03576 05-03577 05-03578 05-03579 05-03580 05-03581 05-03582 05-03583 05-03584 05-03585 05-03586 05-03587 05-03588 05-03589 05-03590 05-03591 05-03592 05-03594 Price $0.58 $0.62 $0.62 $0.62 $0.62 $0.62 $0.62 $0.62 $0.63 $0.34 $0.34 $0.34 $0.34 $0.34 $0.34 $0.34 $0.34 $0.34
Accessories for Base Drill 1 Center Pin For SM4374 1 Center For1 DOC Cutters 2 Center Pin For SM437L Only 2 Center For 2 DOC Cutters
With this optional industrial arbors and 2MT-1/2Drill Chuck now you can! SteelMax industrial arbors let you easily adapt our premium m2AL cutters to a variety of machinery, including CNC, lathes, stationary drill presses and similar equipment. With our integrated coolant collar, cutter performance and cutter life is assured! P/N 12-01812 .............$98.85
745
NO. 2 SWAGE-IT - For use with sleeves for 1/16, 3/32 and 1/8 cable.
Swaging pressure applied by using a wrench to tighten bolts. Size: 1/2 x 1 x 7. Wt. 1 lb. Cadmium plated. P/N 12-12000 ...........$19.50
A fine tool made from high quality alloy steel and heat treated for best cutting action
and long life of cutting edges. Handles shaped for comfortable grip and minimum cutting effort. Max. capacity 3/16 dia. 1 x 19 cable. No. 316 Cable Cutter .............P/N 12-18600 .......... $18.50 This bench mount adds to the versatitlity of the #316 cable cutter. Mounts with 2 screws to a bench or plate. Fingers can still grip the tool. Easily removed. P/N 12-00674 ....................$3.50 These quality cutters feature a unique handle design with thick T shaped vinyl handle grips for maximum comfort while cutting. Cuts 3/32 maximum diameter music wire, heat treated steel spring wire, stainless or galvanized cable. Produces clean square cuts. Gold iridite finish for maximum rust protection. Length: 6. Wt. 7 oz. Model No. 093. .......... P/N 12-18605 ................ $17.95
BENCH MOUNT FOR #316 CABLE CUTTER S & F HARD WIRE CUTTER
This precision instrument gives accurate readings over a wide range of cable tensions. No preliminary adjustments are necessary. May be used continuously without resetting or checking. Extreme heat or bitter cold does not affect the accuracy of the readings. One instrument is usable on many cable sizes with absolute accuracy. The small size permits entry through small openings and permits accurate readings on cable located in confined areas. The entire operation of testing cable tensions can be done with one hand in a matter of seconds. Range in Lbs.: 10-100 on 1/16, 3/32, 1/8; 15-150 on 5/32, 3/16; 25-150 on 7/32, 1/4 .......................................... T5-2002-101-00 ............. $838.00
CABLE TENSIOMETER
Easy to use - just squeeze ball handle, put gauge on cable, release handle and read tension on rotation dial. No conversion charts necessary. Tension range: 1070lbs. for 1/16 cable, 15 - 70 lbs. for 3/32 & 1/8 cable. 50-350 lbs. on 5/32 & 3/16 cable. Only 3-1/4 wide. Fits through inspection hole. For 1/16, 3/32, 1/8 .................P/N 12-19200 ........ $182.95 For 5/32, & 3/16 .......................P/N 12-19210 ........ $167.50
NO-GO GAGE
Standard Features of all models: Easy one-hand operation No interchangeable parts are needed to adapt to different cable sizes Memory Lock Pointer holds readings until cleared Calibration chart affixed to back of meter Durable and made of non-corrosive materials Weigh approximately 21 oz. Compact design allows engagement of meter onto cables closely routed along floors, flat surfaces and other minimum clearance areas. Models ACM100, ACM-200, ACM-300, ACM-400 are compact enough to allow use in limited access panels as small as 4 dia.
Model Part No. Price ACM-100 - Designed to measure from 5-100 lbs ten12-01050 $769.00 sion in 1/16, 3/32, 1/8, 5/32 diameter cables. ACM-200 - Designed to measure 20-200 lbs tension in 1/16, 3/32, 1/8, 5/32, 3/16, and 1/4 diameter aircraft cables. ACM-300 - Designed to measure from 40-300 lbs tension in 3/32, 1/8, 3/16 and 1/4 diameter standard cables. ACM-400 - Designed to measure from 40-400 lbs tension in 3/32, 1/8, 5/32 and 3/16 diameter standard cables. ACM-600 - Measures tension from 40-600 lbs in 1/8, 5/32, 3/16 and 1/4 diameter aircraft cables. 12-01051 $769.00 12-01052 $835.00 12-01053 $769.00 12-01362 $839.00
X X X
64-CGMP ........................................... P/N 12-02560 ..................$284.50 63V-XMP ............................................ P/N 12-02561 ..................$289.75
746
SPECIALTY TOOLS
* Indicate Cable Tensions in Lbs, KG, or Newtons. * Small space access. One-hand operation. Memory storage features. ACX Screen Callouts :Display shows tension, battery charge level, name of calibration selected, and stores and displays up to 5 separate tension readings and their average. * Large, easy to read backlit, graphic display with adjustable backlighting and contrast. * Select cable size from menu. Instrument automatically adjusts calibration to correct setting. * Accuracy is +/- 2% full-scale for all menu-selectable calibrations. Accuracy for custom calibrations is material specific. * Up to 10 calibrations can be entered into instrument. (All calibrations password protected to provide due diligence). * Adjustable LCD refresh rates allow for stable digital readings. * All models factory-calibrated and ready for use on aircraft. * Calibration values traceable to National Standards. Calibration certificate included. Input Real-Time Serial Data into any Windows application using any number of software wedge programs, such as WinWedge Pro for Windows, or configure your Windows operating system to capture the data via HyperTerminal.
Model Range Res. Cable Selections ACX-100 5-100 lbs 0.5 lb 1/16, 3/32, 1/8, 5/32 ACX-250 20-250 lbs 0.5 lb 1/16, 3/32, 1/8, 5/32 ACX-500 40-500 lbs 1 lb 3/32, 1/8, 5/32 CWT-5,CWT-10, CWTACX-CWT 20-250 lbs 0.5 lb 15,CWT-20,CWT-25 1/16,3/32, 1/8,5/32, ACX-CMB 20-250 lbs 0.5 lb CWT-5 thru CWT-25 Part No. Price 12-02103 $834.00 12-01549 $834.00 12-01052 $835.00 12-02104 $833.00 12-02105 $938.00
CM WP ME
The Multitool belt and disc grinding attachments for your bench grinder are must-have tools for any fabricator! These versatile tools remove material up to 5 times faster than with the equivalent grit grinding wheel. Belts change in seconds from grinding, to sand deburr or polish. Quality construction is backed by a 3-year warranty. The attachments are all available with motor options to suit the hobbyist or the professional. Includes 1 belt and 1 disc. Visit our website for a Compatability Template in PDF
HA AP LG EP
The compass filling aid is designed to be used for filling most standard aircraft compasses. The standpipe is simply attached to the compass with a supplied special rubber band. The compass is then filled and purged through the standpipe. When all air is removed, and the level in the standpipe is constant, the plug is then installed through the filled standpipe. Thus the need for submerging for proper filling is eliminated............................................................P/N 12-17604 ...........$21.90 This tool consists of two clamps joined by a 12 length of sprocket type (bicycle) chain. It will accommodate all sizes of aircraft cable. When clamped to cable and fittings at each side of the turnbuckle, anchor the cable to allow free adjustment of the turnbuckle. The adjustment becomes a two hand instead of three hand adjustment. .................................................P/N 12-00833 ........... $19.85
M362 MULTITOOL GRINDER ATTACHMENT (2"X36" Belt and one disc) P/N 12-02064 ...............$199.95
M362-075 MULTITOOL GRINDER ATTACHMENT - (2"X36" Belt and one disc with industrial motor)
P/N 12-02065 ...............$299.95
CS IN EL
M482 MULTITOOL GRINDER ATTACHMENT (2"X48" Belt and one disc) P/N 12-02068 ...............$279.95
The Craft Grip is designed to hold tools or other items in the same manner as the Pen Grip. It differs only in the method of attachment. The attachment device is a u-shaped clip that fits over the edge of many surfaces and holds the organizer in place. These cups snap firmly onto the gripping unit. Its most popular uses are car and truck visors, tool boxes, painting easels and many other locations without harming or being permanently attached to the surface Available in Black or White. Get a Grip Tool Grip (Black) .........PN 12-00953 ...... $6.95 Get a Grip Tool Grip (White) ........PN 12-00954 ...... $6.95 The Pen Grip attaches to almost any surface with double stick tape. Just peel off the backing on the attached double stick adhesive, press firmly onto the surface to which you want it attached and insert your tools. The unique gripping fingers hold all sorts of pens, pencils, & tools in many different positions, even upside down. Like the Tool Grip, The Pen Grip is available in White and Black. Get a Grip Pen Grip (Black) PN 12-00961 ....................... $5.95 Get a Grip Pen Grip (White).............. PN 12-00962 ....................... $5.95
M462 MULTITOOL GRINDER ATTACHMENT (4"X36" Belt and one disc) P/N 12-02066 ...............$249.95
AV TO
M462-075 MULTITOOL GRINDER ATTACHMENT - (4"X36" Belt and one disc with industrial motor)
P/N 12-02067 ...............$349.95
PS BV
M462 MULTITOOL GRINDER ATTACHMENT (4"X48" Belt and one disc) P/N 12-02070 ...............$349.95
WIRE SPOON
Features: Wire threader designed for threading wires into an already tied harness 300 Series stainless steel construction Made in P/N 12-01801 .............$8.75
DISC GRINDER MITER ATTACHMENT The Multitool disc grinding attachment for your bench grinder are must-have tools for any fabricator! These versatile tools remove material up to 5 times faster than with the equivalent grit grinding wheel. P/N 12-02071 .................$74.95
747
Highly productive and a money maker for the shop! Add strut fluid to struts without jacking up the aircraft or removing the valve core and Schrader valve. Do the whole job in a few minutes. This is a huge time saver and is absolutely safe for both the plane and the maintenance technician because the aircraft tire never leaves the ground. Features: USA Built-Machined Aluminum Power load base plate Externally adjustable pressure relief up to 10,000 psi Compatible with most fluids Large reservoir Easy pumping and lightweight Clean system, no spilled fluids, no wasted time Use in conjunction with the standard Strut Service Tool to relieve the extra oil. This saves time and eliminates the need to take one plane off jacks to lift another P/N 13-11204 ........ $498.00 This pump is constructed of aluminum and nylon. Its overall dimensions are 29.5 (750 mm) long, with a body of approximately 1 diameter and a T handle and base 8 (200 mm) long. It weighs 1.65 lb (.75 kg), has a nylon hose with 2000 P.S.I. burst pressure and a strut valve fitting on the end that doesnt depress the valve so that no pressure can escape from the strut. The pump is capable of pumping up to 650 P.S.I. without any compressed air required for the inlet, which is more than adequate for most light aircraft, e.g.: Piper Cherokee PA28-235 needs 450 P.S.I. for the main struts with the weight of the Aircraft on the strut. The pump can also be used as a tire pump as a backup. The main use for the strut pump is for the individual aircraft owner that operates from remote areas and dont have access to a compressor, however they are popular with maintenance organizations as well. The pump is small and light enough to fit in the luggage compartment and have with you all the time ready for that moment when your Oleo goes flat. P/N 12-16714 ........ $382.50 Boost air to 1000psi without an air compressor. Very portable. No air compressor needed! Use air bottle, spare tire, tire pump for source air. Can also use with air compressor for air source. Detailed instructions. Equipped with 7 foot hose P/N 12-16710 .................. $309.00
DEBURRING TOOL
Part No.
Price
12-00800 $2.20 12-00900 $2.40 12-01000 $7.50 12-01100 $11.60 12-01200 $7.85 12-01300 $7.90 12-01400 $4.95 12-01500 $7.30
HX STRUT PUMP
Speedy Burr is designed to take the fatigue out of deburring. The wrist support makes the job easier. This tool is great for deburring spars and extrusions. The light weight, aluminum, hand-grip formed frame is comfortable and helps to maintain continuity in angle and depth of deburr. The wrist support is rubber lined to prevent skin abrasion. P/N 12-00650 ...... $22.95 Speedy Burr II is designed for deburring outside corners, sheet metal, machined parts, extrusions, castings, and plastic parts. This lightweight easy grip tool has a durable plastic coating on the handle for comfort and a sure grip. The burring tip is made from hardened steel and is replaceable. Speedy Burr II ....................... P/N 12-00651 ...... $23.65 Replacement Burr Tip ........... P/N 12-00652 ...... $12.00
SPEEDY BURR
SPEEDY BURR II
Boost air or nitrogen to 2250psi. - More than enough pump for most aircraft. - Built for shop use or for a discriminating do-it-yourselfer. - Weighs less than 7 pounds. - Equipped with a 36 hose. - Comparable to pumps priced in the thousands. - Nitrogen adapter makes it easy to use bottled nitrogen. 15X Strut Pump ................................. P/N 12-16700 .................. $409.00 Nitrogen Adapter Kit .......................... P/N 12-02016 .................... $28.85 Service Strut in your Sunday Suit. - Clean way to service struts. - Strut valve core is NOT removed. - Hose fitting releases pressure & fluid into the bottle. - Raise & lower strut a few times, then apply the charge. P/N 12-16792 ............................. $19.95
The Pro Series Strut Service Tool has all the great attributes of the original Strut Service Tool, with the addition of a dual tank and dual check valve design. The longer service hose makes it easy to attach. Strut pressure, fluid and foam is captured in one tank. Clean, foam-free fluid is drawn back into the strut from the second tank. Simplicity, cleanliness and less waste make this tool a must-have. The strut valve core is not removed. P/N 12-00677 ........$139.95
For 500-5 & 600-6 Bearings and Tires. Package Includes: Set of 500-5 & 600-6, Bearing Cones, Aluminum Balance Shaft, Set of Balance Shaft Bearings, 1/4 oz. Lead Balancing Weights, Aluminum Bearing Packing Tool that, removes old grease and abrasives, A great Stainless Tool Box using the shaft as a handle P/N 12-02309 ......................$399.00
Finally a real time and money saver! This tool changes the way landing gear struts are serviced. No longer do you have to put an aircraft up on jacks to add fluid to and fill Oleo type landing gear. This is a totally clean and safe process. No oil is spilled. The strut valve is not disturbed and the plane is sitting on the ground the whole time. This is safe for the technician and the aircraft. Features: It is a convenient, small, compact system, easy to use, and neat to store Two tank system. One tank contains clean Strut fluid and the other collects the excess Built in pump forces fluid into the strut to top it off and the excess is drained off controlled right from the unit Large capacity 5 qt storage tanks are big enough for just about any strut Can be used on struts requiring up to 3000 psi strut pressure Made in the USA. Strut Filler ................................. P/N 12-03166 ........................... $769.00 Strut Filler Tool ......................... P/N 12-03167 ........................... $594.00
748
CM WP ME HA AP LG EP CS IN
HTC2LT
Double ball-joints of tempered spring steel move freely, hold desired position for viewing to 360. Mirrors have brushed stainless steel backs and insulating vinyl grips. Refill mirrors available. Description Size Length A-2 Circular Pocket mirror 7/8 Dia. 7.5 A-2M Circular Magnifying 7/8 Dia. 7.5 Pocket mirror B-2 Oval Pocket mirror 1 x 2 8.5 C-2 Circular Telescoping 2-1/4 10 to Mirror Dia. 14 C-2M Circular Magnifying 2-1/4 10 to Telescoping Mirror Dia. 14 K-2M Rectangular Magnifying 2-1/8 x 11.25 to Telescoping Mirror 3-1/2 14.25 Description
HTE-2 with 1.25 mirror for viewing in tight areas telescopes from 6.5 to 35 HTC-2 with 2.25 mirror for viewing in less restricted areas telescopes from 6-1/2 to 36-3/8. HTS-2 with 3.25 mirror for brightest clearest viewing with room tomaneuver telescopes from 6.5 to 36-3/8. HTC-2LTwith 2.25 LED case illuminates darkened areas - two lithium batteries included. All-angle ball joint holds lighted mirror head firmly for perfect viewing textured cushion grip will not slip in wet or oil hands. Stainless steel handle telescopes from 6-3/4 to 37
This Super-Bright Micro 360 Flexible LED Light is 10 times brighter than standard flashlights and lasts up to 100 hours on a single set of batteries! Features: Stainless Steel Lifetime Warranty Focused lens power beam Shock proof, water resistant and cold burning LED-Light-Emitting Diode White beam 100 hours of light without a battery change Diodecharge system Easy on/off-switch 6 in length Batteries included. Micro Flex ....... P/N 13-02846 ..... $26.75 Mega Flex ....... P/N 13-02847 ..... $44.95
FLEXIBLE MICROLIGHTS
Part No. Price 12-01080 $4.90 12-01081 $7.50 12-01169 $5.50 12-01175 $7.85 12-01176 $11.95 12-01152 $12.95 Part No. Price
The Brighteyes Pro Headlights is a hands-free flashlight worn like eyeglasses to provide light for reading maps, instruments, repair work, and more. Excellent for work on aircraft, automotive applications, around the house, camping, & fishing. Headlights can be used with or without eyeglasses, and the lights will swivel to direct the light where you need it. (4) AAA batteries included. P/N 12-00242 .......... $12.85
HEADLIGHTS
Bend-A-Light flexible brassalloy high intensity light tools bend to any configuration and illuminate hard-to-reach areas where conventional lighting cannot go. The incredibly brilliant light beam penetrates anywhere! Bend-ALight is a must for electronics, automotive, maintenance, repairs, locksmiths, industrial, hobbies, around the house and more. You bend it and it holds! Bend-A-Light is the only complete line of professional quality high intensity flexible light tools. Available in 3 lengths and 3 different lamps to choose from. All Bend-A-Light models are made in USA and come with batteries installed. Length Flex Shaft 12-15005 Mini Pro 6 12-15150 Pro 15.75 12-10250 Removable Shaft 9.5 Part No. Description Length Batt. Overall Bulb Price
BEND-A-LIGHT
Price $1.19
11.5 2-AAA 12100 $18.75 24 3-AA 12110 $36.75 15.75 2-AA 12100 $19.95 Dia 5/32 5/32 Bulb Life 4 Hours 20 hours Price $6.75 $8.50
No more trying to aim a flashlight at the old style mirror. Inspector is a onehand tool that comes with a very bright light that illuminates the total inspection area. Easy to adjust the mirror angle. Once inserted into the inspection area, simply push or pull the thumb knob for a 90 mirror angle adjustment. The product is constructed of non-conductive materials for safety. The mirror, lamp, and 2AA batteries (included) are easily replaceable. Inspector ........................................... P/N 12-15105 ....... $23.90 Inspector Replacement Lamp ........... P/N 12-15110 ......... $3.65 Inspector Replacement Mirror........... P/N 12-15115 ......... $5.75
EL AV TO PS BV
Part No. Description 12-15020 12100 - Replacement Lamp 12-12110 12110- Krypton Lamp
Hawkeye Rigid Borescopes feature the patented endoGRINS(r) lens technology that provides a sharp view inside engine cylinders, wings, under seats, and other remote areas. Includes a mirror tube which allows you to look sideweays in a 360 degree arc as well as straight ahead. Packed in a lockable metal case with die-cut foam to protect the borescope. The heavy duty Mini-NOVA light source is highly recommended in aircraft applications. All Hawkeye Slim borescopes have a 0 direction-of view and 42 field-of-view. A rotating 90 direction-of view is achieved by sliding a Slim Mirror Tube onto the scope. Hawkeye 7 Hawkeye Hardy Kit .............................P/N 12-00337 .........$796.00 12 Hawkeye Hardy Kit ...........................P/N 12-00338 .........$839.00
The Binocular Magnifiers offer powerful, crisp magnification of your detailed projects while simultaneously leaving both of your hands free to work. The ground and polished optical lens is mounted to a tilt-up frame, allowing you to disengage the magnifier without removing the entire assembly from your head. This item is equipped with a cushioned headband which rests as comfortably as a baseball cap and is likewise adjustable for a snug fit. Features: 1.75x magnifying lens. Great for assembly and inspection applications. Used commonly by toolmakers, machinists, engravers, jewelers and hobbyists. Leaves hands free to work. Tilt-up lens frame instantly removes magnifying lens from sightline. Ground and polished optical lens eliminates eyestrain. Fits over prescription glasses. Adjustable, cushioned headband for comfort fit. 14 focal length. Description Binocular Magnifiers Power Focal Length Part No. Price 2.25X 10 950-5 $29.50
BINOCULAR MAGNIFIERS
749
SPRAY SYSTEMS
CM WP ME HA AP LG EP CS IN EL
GTS-4900 HVLP SPRAYER - Our most powerful and versatile sprayer
The Citation HVLP twin turbine system provides both a professional quality paint spray system and the HobbyAir supplied-air respirator in one portable package. This system comes complete with everything you will need to spray exceptionally fine finishes with practcally any material and to breathe in safety and comfort while you work. The basic system includes two 40 airlines (one for breathing and one for painting) and a half face mask. Available options include: A larger two-person Citation system with 3 airlines ( two for breathing and one for spraying), Full face masks, and air-supplied hoods. This system comes with an unconditional 1-year warranty. ........................... P/N 12-15900 ............. $997.00 Optional 4 ft. whip hose ................ P/N 12-15910 ............... $19.75 The Axis series of paint sprayers is designed to take the guesswork out of choosing a spraying system which can be confusing for the homebuilder who is going to paint for the first time. Rather than offer a wide variety of sprayers, Axis has selected the best turbine for each type of product normally used to finish an airplane. This is the SP 2003 (three stage turbine) which is furnished with 30 feet of air delivery hose and the Lexair spray gun. Select one of the three systems shown below based on type of material you will be spraying. If waterborne materials are going to be used, we can furnish systems for this process on a special order basis. Sys. 1 to paint aircraft covered in fabric......P/N 12-15920 ........ $819.00 Sys. 2, to paint composite structure ............P/N 12-15930 ........ $770.00 Sys. 3, to paint over metal or wood ............P/N 12-15940 ........ $795.00 Virtually eliminates mist. Requires less maintenance. Blows less heat up the stack. Uses up to 50% less material. Delivers better pattern control. Reduces overspray up to 90% Eliminates high-pressure flop and tiger stripes.
GTS-3800 HVLP SPRAYER - The GTS-3800 is highly productive for nearly all fine finish applications. Easily spray stains, lacquers, oils, enamels, urethanes and automotive finishes. Plus, it atomizes many water-based latex and acrylic coatings, multi-color and other higher viscosity coatings. Turbine Stages 3 Turbine Air Working Pressure 6 psi (.414 bar, 41.4 kPa) max. Turbine Air Outlet Flow Rate 80 cfm (2265 lpm) max. Gun GTS-980 Non-Bleeder Style with Fluid Set #3 Cup 1 qt (1 liter) High-Flex Turbine Air Hose Length Standard units incl. 30 ft (9 m). Use 60 ft (18 M ) max. Power Cord No. 16 AWG, 3 wire, 6 ft (1.8 m) Electrical Rating 12A at 120 VAC Weight: Complete 34 lb Dimensions: 18 in. x 15-1/2 in. x 16 in. P/N 12-15780......... $954.00
ACCESSORIES
Lexair Gun ...................................................12-01385 ............... $385.95 Hose 40 .......................................................12-01386 ................. $59.90
CITATION 240
AV TO PS BV
offers everything you need on the job for high productivity. This unit is loaded with features and can spray the broadest range of materials. Turbine Stages 4 Weight: Complete 39 lb Turbine Air Working Pressure 8 psi (.552 bar, 55.2 kPa) max. Turbine Air Outlet Flow Rate 82 cfm (2321 lpm) max. Gun GTS-980 Non-Bleeder Style with Fluid Set #3, #4 and #5 Cup 1 qt (1 liter) High-Flex Turbine Air Hose w/Quick disconnects Standard units include 30 ft (9 m). Use 60 ft (18 M ) max. Power Cord No. 12 AWG, 3 wire, 15 ft (4.6 m) Electrical Rating 14A at 120 VAC Dimensions: 18 in. x 15-1/2 in. x 16 in. P/N 12-15950...... $1,652.00
Ideal for tight areas. Holds approximately one pint of paint. P/N 12-01121 .......... $38.95
GRACO ACCESSORIES
Description 30 ft. Replacement Hose Superflex Hose 54 Part No. 12-00016 12-74660 Price $92.25 $32.75
Gravity air brush, double action trigger for air-paint control, precision machined nozzles -air and fluid . Color Appliedwatercolors,acrylics,dyes and inks. Contains: 1 x Airbrush, 1 x 8.6Hose, 1 x Wrench, Fluid Nozzle - 1 x 0.3mm, 1 x 0.5mm, 1 x 0.7mm, Metal cups - 1 x 2cc, 1 x 5cc w/lid, 1 x 13cc w/lid. P/N 12-02566 ....... $174.95
750
SPRAY EQUIPMENT
MODEL 2001 AIR SPRAY GUN - This new gun incorporates the best features found in most heavy-duty production guns. The new grip will reduce operator fatigue and improve control. It utilizes the new style fluid nozzle with six air passages. It weighs only 24 oz. and is perfectly balanced. The head is forged brass and the body is anodized forged aluminum alloy. Spray pattern is adjustable from round to fan with a full range of intermediate settings. Air Flow: 8.1 CFM @ 50 PSI with No. 66 fluid nozzle and No. 66SA air nozzle. Air connections - Fluid inlet - 3/8 NPS (m), Air inlet 1/4 NPS (m). All parts replaceable. Made in U.S.A. Furnished with Model 81-350 DRIP-PROOF 1 Qt. attachable siphon cup. Wt. 3.25 lbs. Model 2001 Gun and Cup............ P/N 12-04000 .......$328.00 Gun Only ...................................... P/N 12-04100 .......$266.95 Cup Only ...................................... P/N 81-350 .............$64.85
Model 95 spray gun employs the best features of Binks most popular conventional air spray guns. This gun delivers higher quality finish, faster production, less operator fatigue, greater fluid compatibility, and more application versatility than any spray gun currently available. Model 95 is a high production gun with stainless steel fluid passages which may be used with most coatings. This new gun replaces Models 18, 62, and BBR spray guns, incorporating the best features of all 3: dropforged anodized aluminum body, stainless steel fluid passages, adjustable floating needle valve, hardened steel or stainless steel fluid nozzle, plated drop-forged bronze self-centering air nozzle, brass air valve cartridge, adjustable spray pattern, 3/8 NPS (m) fluid inlet, 1/4 NPS (m) air inlet. Weight 1 lb., 11 oz. Model 95 Hand Gun ..................P/N 12-14150 ................... $308.95 Model 95 gravity feed hand gun with 1-1/3 alum. pint cup P/N 12-04155 ................... $370.95
CM WP ME HA AP
5/16 Dia. hose with standard 1/4 NPS connection at both ends. 5/16 Dia. x 25 Long ........ P/N 71-1205 ...........$49.50 5/16 Dia. x 50 Long ........ P/N 71-1206 ...........$98.50 A 5/16 diameter hose is recommended for efficient operation.
Bink stainless steel pressure assisted 1 quart cup & attachment. 80-500 cup/lid assembly ... P/N 12-01332 .......$174.95 82-367 cup gasket (poly) .. P/N 82-367 ...............$9.75
The Binks Mach 1 HVLP is a siphon-fed refinishing system that performs like your favorite conventional outfit but produces far superior transfer efficiency. A unique arrangement of air nozzle, fluid nozzle, and needle enable the Mach 1 to draw material from a standard siphon feed cup and avoid the need for a pressure cup. Eliminates the need for the operator to set fluid pressures. Delivers lower emissions for compliance with environmental regulations. P/N Description Price 12-04410 MACH 1 Siphon Gun Only $414.95 MACH 1 HVLP Siphon outfit -Spray Gun, 81-375 98-1176 $492.95 No-Drip Siphon Cup, &83-469 gun brush.
The Beugler tool makes accurate lines consistently, without gravity or pressure, eliminating the need for tape. The unique serrated wheel and wheel head design are the secret to the stripers success. Ideal for any art project, the Beugler Striper is a professional tool used by auto, truck and motorcycle painters around the world. Beuglers magnetic guide securely holds to any steel surface, allowing the stripers guide arm to slide smoothly along its recessed groove for long, accurate, straight, or arced lines. To ensure customer satisfaction, Beugler also offers a 40 minute video tape or DVD with instructions, tips and demonstrations. The Beugler Striper works well with any creamy consistency paint. You can stripe at any angle, as the tool is not gravity fed. Both Professional and Deluxe Kits are of the same quality and include guides, clean up brush, 2/3 oz. paint barrel (which stripes 250 to 1750 feet, depending on stripe size) and complete instructions. Length 4-1/4. O.D. 3/4. Description PN Price Deluxe Kit (Includes 3 Srtiping Heads) 12-01696 $121.95 Professional Kit (Includes 7 Srtiping Heads) 12-01695 $168.95
LG EP CS IN EL AV TO PS BV
One Quart drip proof cup - clamp type - with a extra vent tube. Shipping weight 16 oz. Fulid inlet: 3/8" nps (f) P/N 12-02457 ................... $69.50
Model No. 59-10005 includes 1/4, 1/2 and 2-1/2 fl. oz. color bottle assemblies, and 6 ft. plastic air hose with connections, packed in a durable styrene case. The Wren Air Brush is a must for retouching, special effects spraying and small parts finishing. Ship Wt. 20 oz P/N 59-10006 ................... $159.00
Utilizes disposable paper cups as paint reservoirs making color changes possible in seconds. Package of 50 cups. P/N 01-00325 ..............................$6.75
Runs off of an air compressor and is simple to use. Just plug it into the air hose using the adapter (included) & start cleaning. The body of the unit is plastic or cast aluminum construction with an 18 clear plastic flex tube that can easily get into tiny spaces to clean. The canvas bag is easily removed. Wt. 8.5 oz. Mini-Air Vacuum - plastic ...........P/N 12-16820 ...........$31.50 Mini-Air Vacuum - aluminum ......P/N 12-16821 ...........$54.75 Spare Bag and Clip ....................P/N 12-16825 .............$7.85 36 Clear Flex Hose ...................P/N 12-16830 ...........$10.75
751
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
aluminum body, low cfm [4-6], SS fluid passages. Tip sizes available: 1.0, 1.3, 1.4, 1.5, 1.8, 2.0, 2.5 P/N 12-02136.......................... $199.00 66-110 - 1 Qt aluminum cam-lock cup (Order Separate) P/N 12-02137............................ $23.85 6008 - HVLP Spray gun, drop forged body, for use with pressure pots P/N 12-02138.......................... $199.00 600817 - HVLP Spray gun, drop forged body, with #66-110 cam-lock siphon cup P/N 12-02139.......................... $233.60 77SSXX - Conventional spray gun with #66-110 camlock siphon cup replace xx with 1.8 or 2.0 1.5 ............... P/N 12-02140........... $175.00 2.0 ............... P/N 12-02141........... $175.00 6008XX - Fluid nozzle, air nozzle and needle P/N 12-02142............................ $90.00 6008RK - Repair Kit ................ P/N 12-02143............................ $23.85
This Gravity Gun is ideal for applying a wide range of materials such as Primers, Fillers, and Virtually all Wood Coatings 28XX - Gravity Gun with 750 cc. aluminum cup with nylon cover P/N 12-02228 .............. $126.95 29XX - Fluid nozzle, air nozzle and needle replace xx with 1.0, 1.2, 1.4, 1.5, 1.6, 1.8, 2.0, 2.2, 2.5MM P/N 12-02225 ................ $40.00 28-RK - Seals and springs repair kit for E70 P/N 12-02231 ................ $27.50 ANI-CUPA - 750 cc. Aluminum cup with nylon cover P/N 12-02234 ................ $26.00
high efficiency low cfm at 5-7 (Tip sizes available: 1.3, 1.4, 1.5, 1.7, 2.0 2.5) 1.3 ....................P/N 12-02166 ................ $98.75 1.4 ....................P/N 12-02167 ................ $98.75 1.5 ....................P/N 12-02168 ................ $98.75 1.7 ....................P/N 12-02169 ................ $98.75 2.0 ....................P/N 12-02170 ................ $98.75 2.5 ....................P/N 12-02171 ................ $98.75 663XX - Low air consumption HVLP gun with syphon cup low cfm at 5-7. (Replace xx with tip size: 1.7, 2.0, 2.5) 1.7 ...........................P/N 12-02172 .............. $113.95 2.0 ...........................P/N 12-02173 .............. $113.95 2.5 ...........................P/N 12-02174 .............. $113.95 66-110 - 1 qt Cam- Lock Cup 2.0 ...........................P/N 12-02137 ................ $23.85 67999 - Seals and springs repair kit .....P/N 12-02161 ................ $23.85 67-100 - 1 qt Pressurized aluminum cup with check valve and regulator P/N 12-02177 ................ $92.25 Gravity spray gun kit 600 cc. aluminum cup, 5 CFM @ 30 PSI ECO/SX HVLP 62-400 - Spray gun kit includes 3 needle/nozzle sets 1.0, 1.4, 1.7mm, 1 - 600cc aluminum cup, 2 cleaning brushes and wrench in carrying case P/N 12-02130 .............. $295.00 ECO/SX N/N - aircap kit 1.0,1.2,1.3,1.4,1.7,2.0 (replace xx with tip size) P/N 12-02131 ................ $90.00 K1/SX HYBRID 62-450- high transfer efficiency Spray gun kit. Includes same as above P/N 12-02132 .............. $295.00 K1/SX N/N - aircap kit 1.0,1.2,1.3,1.4,1.7,2.0 (replace xx with tip size) P/N 12-02133 ................ $89.95 REPAIR KIT P/N 12-02134 ................ $18.50 ALUMINUM GRAVITY CUP - 1000 cc (35 oz) P/N 12-02135 ................ $28.50
RP-XX - R200 HVLP spray gun, pressurized aluminum camlock cup, regulator and check valve (replace xx with tip size. 1.3, 1.4, 1.5, 1.7, 2.0, 2.5 ) This outfit is perfect for small painting jobs that require precise fluid control. Can spray thicker material. Maximum cup pressure 10 PSI 1.3 ...........................PN 12-02180 ............... $267.95 1.4 ...........................PN 12-02181 ............... $267.95 1.5 ...........................PN 12-02182 ............... $267.95 1.7 ...........................PN 12-02183 ............... $267.95 2.0 ...........................PN 12-02184 ............... $267.95 2.5 ...........................PN 12-02185 ............... $267.95
Ultra compact and light spray gun featuring a reduced air consumption. 1 qt. cam-lock cup 77SXX - 77S Spray gun with standard cam-lock cup replace xx with 1.5, 2.0 mm P/N 12-02236 .............. $185.00 77SSPXX - 77 SSP Spray gun only. Replace xx with 1.5, 2.0mm P/N 12-02237 .............. $175.00 77XX - Fluid nozzle, air nozzle and needle for 77 (replace xx with nozzle size) P/N 12-02238 ................ $90.00 77SRK - Seals and springs repair kit for 77 P/N 12-02239 ................ $18.50 66-110 - 1 qt. aluminum cup with cam-lock P/N 12-02137 ................ $23.85
61- 210 - HVLP Mini Gravity Gun Kit includes 200cc aluminum cup, 4 glass jars, 5 air hose with quick disconnect, filter, 2 adapters, cleaning brush and wrench in carrying case. This unique kit has all the necessary parts to convert from a Mini Gun to an Air Brush P/N 12-02144 .............. $190.95
Water base HVLP Gravity Feed spray gun with 600cc Nylon cup. Features: High transfer efficiency with low air consumption. Provides wide fan pattern with superior atomization. Environmentally friendly. Die cast aluminum gun body. Stainless steel fluid nozzle & needle. Stainless steel fluid passages P/N 12-02712 .............. $276.95
99518 - PQ Cup Gun Economical high pressure air spray gun P/N 12-02242................ $49.75
61-210SE - 200cc Nylon Cup ...............P/N 12-02148 ................ $18.90 61-220SE - 200cc. Aluminum Cup .......P/N 12-02149 ................ $19.50 61-2000R - Repair kit ...........................P/N 12-02150 ................ $18.50 828-GTXX - Glazing nozzle kit c/o fluid nozzle, air nozzle and needle.
( Complete for both sprayable and non sprayable materials) replace xx with 1.0 or 1.5 1.0 ...........................P/N 12-02153 ................ $84.60 1.5 ...........................P/N 12-02154 ................ $84.60
PRO 3 - 110V, 3 Stage turbine unit, 101 CFM @ 6 PSI comes with gun, cup, 25 hose and coupler. Perfect for cabinet makers, furniture refinishers and most trades. Spray cabinets, furniture, autos or pianos. P/N 12-02108 ........... $1,049.00 PRO 4 - 110V, 4 Stage turbine unit comes with gun, cup, 25 hose and coupler. The most powerful 4 Stage available. Perfect for paint contractors spraying Latex house paints, cabinet makers, furniture refinishers and most trades P/N 12-02109 ........... $1,129.00 XT 2 - Turbine spray gun & cup P/N 12-02110 .............. $395.00 WARRANTY: All systems 24 months -Parts & Labor
752
AB1117K * Double action trigger for air-paint control * Precision machined nozzles-air and fluid cap * Suitable for graphic artwork Contains: 1 - Airbrush, 1 - Hose, 1- Wrench 1 Jar Adapter, 1 - 5 cc. Paint cup Fluid nozzles - 1 of 0.3, 0.5, 0.7mm 2 - 22cc glass jar, 1 - 50 cc glass jar. P/N 12-02218 .............. $158.75
65-911 - 2-1/2 gal. pressure tank, single regulator, Teflon coated inside and outside Safety relief valve, pick-up tube with filter, wide lid and low side walls, large wheels for easy movement. P/N 12-02117 .............. $280.95 65-912 - Same as above with dual regulators P/N 12-02118 .............. $320.00 65-914 - Replacement gasket for 2 1/2 gal. tank P/N 12-02119 ................ $21.75 AT2.5ASS - 2.5 gal pressure tank, air agitator, stainless steel inner liner, dual regulators, stainless steel fitted. P/N 12-02120 .............. $850.00 65-0097 - Complete regulator assembly for 2 1/2 gal tank P/N 12-02121 ................ $44.85 65-0098 - Complete second regulator assembly for 2 1/2 gal tank only P/N 12-02122 ................ $44.85 65-0099 - Double regulator assembly for 2 1/2 gal tank P/N 12-02123 ................ $89.50 AOM AIR BRUSH HOSE MCR011 - 10 Air brush hose 1/4F
X 1/8F P/N 12-02220 ................ $20.85 P/N 12-02216 ............... $14.50
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
AOM ACCESSORIES
AOM GUN HOLDER RP 8413 - Gravity gun holder AOM DISPOSABLE LINERS - Disposable Liner round bottom fits # 65-911 & # 65-912 (10pk) P/N 12-02124 ................ $36.75 Disposable Liner flat bottom fits # AT2.5ASS tank (12pk) P/N 12-02125 ................ $42.85 Disposable Liner round bottom fits 5 gal pressure tanks (24pk) P/N 12-02127 .............. $126.95 2 1/2 & 5 gal. bag tank liners 4 mil. (10 pk) P/N 12-02128 ................ $25.50
AB1117C - Double action trigger for air-paint control, precision machined nozzles -air and fluid, suitable for graphic artwork. 0.5 bottom feed with glass jar P/N 12-02219 .............. $109.00
AC16 1/6 HP Mini air brush compressor (Piston Type) with filter, micro switch and 10 retractable air hose (Airbrush Not Included) P/N 12-02221.............. $185.00
AOM HARD CUP KITS - Can be mounted on any AOM spray gun.
DC 195-12 - Kit contains 12 Soft Liners, 12 Rings, 12 Lids w/Filters, 12 Caps, 1 Hard Cup and 1 Adapter P/N12-02203 ................. $51.00 DC 195-12 - Kit contains 12 Soft Liners, 12 Rings, 12 Lids w/Filters, 12 Caps (Used with DC 191 Hard Cup) P/N12-02204 ................. $48.00 DC 190-48 - Kit contains 48 Soft Liners, 48 Rings, 48 Lids w/Filters, 48 Caps (Used with DC 191 Hard Cup) P/N12-02205 ............... $130.00 DC 191 - Hard Cup ( 750 ml capacity) P/N12-02206 ................. $16.00 DC 192 - Adapter used with all AOM gravity guns (except Mini gun) P/N12-02207 ................. $14.00 DC 193 - Adapter used with all AOM pressure guns P/N12-02208 ................. $14.00 DC 194 - Shaker Cap P/N12-02210 ................... $7.50
AOM QUICK COUPLERS 41106 - 1/4 Brass Male thread P/N 12-02196 ................ $16.95 41156 - 1/4 Brass Female thread P/N 12-02197 ................ $16.85
AOM QUICK CONNECTORS 42200 - 1/4 Brass High Flow male .......P/N 12-02198 .................. $2.50 45600 - 1/4 Brass Std. flow male .........P/N 12-02199 .................. $2.50 42300 - 1/4 Brass High Flow female ....P/N 12-02201 .................. $2.50 45700 - 1/4 Brass Std. flow female ......P/N 12-02202 .................. $2.50
75-111S - Large Mouth 2 qt. remote pressure tank, teflon coated inside, single regulator, safety relief valve, handle, lightweight, screw type top. Dual regulated available. P/N 12-02112 .............. $149.95 65-424/1 - Replacement gasket for 2 qt large mouth remote pressure
P/N 12-02114 ................ $19.85 75-111SS - 2 qt all stainless steel remote pressure tank, single regulator, safety releif valve, handle, lightweight, screw type top. P/N 12-02115 .............. $575.00 75-112SS - Replacement gasket for 2 qt all stainless steel remote pressure tank P/N 12-02116 ................ $19.25 tank
AOM MAINTENANCE KIT - Spray gun maintenance kit includes 12 special steel cleaning needles. Perfect for removing dry paint particles from air cap and nozzle as well as all difficult to reach gun parts. P/N 12-02107 ................ $32.75
AOM SPRAY GUN LUBE 811-12 - Spray gun lube 12 pcs/Counter Display Box P/N 12-02211 ................ $43.85
753
TIG CALCULATOR
POWER MIG 140C - Power MIG 140C (K2471-1)with continuous voltage control for more critical projects where precise adjustment is required. Diamond Core Technology and the rugged drive system aid arc performance for MIG welding on thin gauge steel, stainless and aluminum. Or, use gas-less flux-cored welding for deep penetration on thicker steel, even outdoors! With a wide 30-140 amp welding output range it is the highest output in 120 volt input power welder class. MIG weld 24 gauge up to 10 gauge (.135) sheet metal in a single pass. Includes: Magnum 100L welding gun (K530-6) Six spare contact tips Gas and gasless nozzles Work cable and work clamp Adjustable gas regulator and hose .025 and .035 smooth drive rolls .030-.045 knurled drive roll .025-.035 wire guide 2 lb. spool .025 Super Arc L-56 wire 1 lb. spool .035 Innershield NR-211-MP self-shielded flux-cored wire 8 spool spindle adapter How to Use DVD. P/N 12-01623 ...... $749.95
9GL KIT - TigDepot Parts Kits provide all the torch accessories you need to start welding. Parts Kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. The 9GL-Kit comes with .040, 1/16, 3/32 Collets, Gas Lens Collet Bodies, Gas Lens Nozzles, (#5, #6, #7), a long Back Cap, and an assortment of 2% Thoriated and Ceriated Tungsten in a convenient plastic box. For the 9 Series torches P/N 12-00393 ........ $63.75 17H-GL KIT - The TigDepot 17H Gas Lens Kit is made specifically for the 210 Amp 17H Torch. The Kit includes One of each: 2% Thoriated Tungsten .040, 1/16, 3/32 DIA. Alumina cups #5,6,7 Gas lens .040, 1/16, 3/32 Collets .040, 1/16, 3/32 Backcaps-short,medium, long Insulator Tool box PN 12-00394 ......... $79.25 TIG weld Aluminum, Stainless Steel,Chrome Moly, and many other metals. Plug it directly into your standard household outlet (110 volts, 15amps). Kit includes: CK9 Rigid Torch w/Valve and 12.5 one piece cable with male dinse connector. Flowmeter Regulator Adapter Plug with 1 extension cord Female Dinse to allow you to go back and forth to stick welding. AK-4 Accessories Kit AMP Conversion Decal Instruction Manual P/N 12-00389............ $271.95 With NEW patented Micro-Start II Technology and our New and Improved AC Auto Balance on board, the Precision TIG 275 delivers unrivaled starting and welding at low amperages and improved AC aluminum welding performance. Includes: Precision TIG 275 (208/230/460/1/60), Under-Cooler Cart Water Cooler, Foot Amptrol, Harris Argon/Helium Flowmeter Regulator and 10 ft Hose (3100338), PTW-20 Pro-Torch, TIG Torch (250 amp, 25 ft.), Zippered Torch Cover, Parts Kit, Water Hose (2 included), 15 ft. 2/0 Work Cable and ClampWeight:397 lbs. (180 kgs. ) Dimensions (in) H x W x D : 31 x 22 x 26 P/N 12-00769 ..............$2,918.00
V205-T AC/DC INVERTEC - For TIG and Stick Welding. Ideal for critical AC or DC TIG Welding applications. Variable AC frequency allows you to focus the arc when precise arc control is required. The 115/230V auto-reconnect makes the V205-T AC/DC truly flexible. The unit comes with a 10 ft. 230V input cord and plug; a Twist-Mate Torch Adapter for 9 and 17 Series one piece torches; Twist-Mate adapter for work cable; and adjustable shoulder strap. This full featured TIG Welder is also capable of Stick Welding. P/N 12-00384 .......$3,129.00 One-Pak Package Includes: V205-T Foot Amptrol (K870) and TIGMate 17 Starter Kit. Assembly required. P/N 12-00776 .......$3,665.00 AC-225 COMPACT STICK WELDER - Produces an extremely smooth AC arc for welding a wide variety of materials including carbon, low alloy, and stainless steels as well as cast iron. Input Power - 230/1/60. Rated Output - 225A/25V/20% Duty Cycle. Input Current @ Rated Output - 50A. Output Range - 40-225 Amps (Max OCV: 79V). Weight/Dimensions (H x W x D) - 109 lbs. (49.5 kg). 24.0 x 17.25 x 12.0 P/N 12-02683 .........$425.85
Includes: Precision TIG 275 (208/230/460/1/60) UnderCooler Cart Water Cooler, Foot Amptrol, Harris Argon/ Helium Flowmeter Regulator and 10 ft Hose (3100338), PTW-20 Pro-Torch TIG Torch (250 amp, 25 ft.) , Zippered Torch Cover, Parts Kit, Water Hose (2 included) , 15 ft. 2/0 Work Cable and Clamp. Weight:641 lbs. (291 kgs. ) Dimensions (in) H x W x D : 49.7 x 28 x 41 P/N 12-02249 ..............$4,627.00
SP-140T WELDER - 120 Volt AC Input Compact Wire Welder. Requiring common 120 volt input power, the SP-140T can be used almost anywhere. With simple two knob tapped control, the machine is easy to set up for gas-less flux-cored welding for deep penetration on thicker steel or gas-shielded MIG welding on thin gauge steel, stainless or aluminum. Compare the precise drive, rugged construction and full list of standard accessories. Lincoln SP-140T is an excellent choice! P/N 12-02684 .........$669.95
754
WELDING CARTS
- (150 cu.ft. bottle capacity) Accommodates power source, gas cylinder, tools and welding accessories. Dimensions (HxWxD): 30 (min.)/34 (max.) x 18 x 35 inches. Weight:38 lbs. (17.2 kgs. ) P/N 12-00773 ..................... $179.95 K2275-1 WELDING CART - (80 cu.ft. bottle capacity) Fullfeatured cart is designed to store and transport a welder, 80 cubic foot gas cylinder, welding cables and accessories. Replaces K520. Weight:24.75 lbs. P/N 12-00777 ... $97.50 MAGNETIC UNI-JIGS
With regulators. Designed for hobby, crafts, plumbing, etc. Braze and solder material from the thinnest up to 1/8 thick steel, melt up to 3 oz. silver. Provides stable and precise concentrated feather flame up to 6000F for various materials such as metals, ceramics, and glass. P/N 12-00447 ..............$242.95 Cuts up to 3. Spiral tube mixer design optimizes the mixture of fuel and oxygen. Stainless steel tubes and lever. A hose fitting, 3/8-24 thread. P/N 12-00448 ..............$102.50 Plastic Stand, Oxygen and Acetylene Cylinders - Plastic Cylinder Stand holds MC Acetylene Cylinder and R Oxygen Cylinder. Plastic Cylinder Stand P/N 12-00449 ............... $39.95 MC MC Acetylene Cylinder (Empty) P/N 12-00451 ............... $93.75 R R Oxygen Cylinder (Empty) P/N 12-00452 ............... $91.25 These are a good import, not too stiff. P/N 12-05155 ............ $4.75 Quick release buckle and cross straps make it very comfortable; it also has pockets. P/N 12-05160 .......... $17.95 3M Speedglas 100 Welding Helmets deliver outstanding protection, comfort and performance with distinctive graphic designs. Welders can benefit from its excellent optical quality and reliable light-to-dark switching at a highly affordable price. The Speedglas 100 welding helmet can be used with most arc welding processes, such as stick (MMA), MIG/MAG and TIG applications greater than 10 amps. Its also the ideal entrylevel auto-darkening helmet for occasional users, such as hobbyists, farmers and maintenance or construction workers. P/N 12-02695 ... $228.95 Lightweight headgear, shield flips down over prescription glasses. Good over bifocals. P/N 12-05175.....$19.35 Gas welding goggle with adjustable headrest that pulls out and down. Permits easy use of eyeglasses. 2 x 4 lens. P/N 12-05165 ..................$56.50 3/16 hose that may be used with all welding outfits. B-B FITTING - 12 ..............P/N 12-05916 ............ $9.40 25 ..............P/N 12-05917 .......... $16.50 A-B FITTING - 12 ..............P/N 12-05918 .......... $11.80 25 ..............P/N 12-05919 .......... $25.75
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Magnetic holders for hands-free support in a variety of applications. Designed to last a life time. Each angle is screwed (not riveted) completely through the magnet to insure proper angles. Small (supports up to 45 lbs.) P/N 12-05185 ............ $7.95 Large(supports up to 80 lbs.) P/N 12-05186 .......... $17.95
The Model 15 is a lightweight, aircraft style featuring a forward valve designed to permit changing flame serttings with one hand. For welding, heating and brazing with fuel gases. Class A 3/8-24 hose connection Cap: Cuts 2, welds to 5/16 UL listed Length: 5-3/4, Wt: .5 lbs. Torch Handle ................P/N 12-00687 ........ $195.95 B-15-3 Mixer .................P/N 12-00688 .......... $83.50 Welding Tip...................P/N 12-00689 .......... $18.25 Torch Handle Kit - Torch, Mixer and Tip P/N 12-00690 ........ $296.95 Sold in packages of 10 2% Thoriated 1/16 ..................................P/N 12-00438 ........... $14.85 3/32 ..................................P/N 12-00439 ........... $32.85 2% Ceriated 1/16 ..............................................P/N 12-00440 ........... $14.95 3/32 ..............................................P/N 12-00441 ........... $32.70 Pure 1/16 ..............................................P/N 12-00442 ........... $14.60 3/32 ..............................................P/N 12-00443 ........... $39.90 36 Cut Lengths are packaged in 1 lb. tubes to provide you the flexibility of buying only what you need for your job.
Base Material 4130 4130 4130 4130 4130 4130 Aluminum Aluminum Aluminum Aluminum Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Inconel Inconel Super Alloys Titanium Magnesium Use Filler ER80S-D2 ER80S-D2 ER80S-D2 ER70S-2 ER70S-2 ER70S-2 ER4043 ER4043 ER5356 ER5356 ER312 ER312 ER312 ER308L ER308L NICKEL 625 NICKEL 625 ALLOY W TITANIUM TITANIUM Size .035 .045 .062 .035 .045 .062 .045 .062 .045 .062 .035 .045 .062 .035 .045 .035 .045 MKT MKT MKT Part No. 12-00473 12-00474 12-00475 12-00477 12-00478 12-00479 12-00480 12-00481 12-00482 12-00483 12-00484 12-00485 12-00486 12-00487 12-00488 12-00490 12-00491 Special Order Special Order Special Order Price/Lb. $13.40 $11.80 $9.90 $13.60 $12.85 $10.90 $24.20 $15.50 $26.40 $13.50 $36.40 $31.40 $22.75 $28.65 $25.50 $118.75 $138.95 Call Call Call
STAND
TIG TUNGSTEN
WA-GOGGLE
OXY-ACETYLENE HOSE
Green Hose: Oxygen. Red Hose: Acetylene. Length: 12-1/2 (3.8m). Diameter: 3/16 (5mm). Weight: 2-1/2 lbs (1.1kg). Use with AW Torch Series. A 3/8-24 & B 9/16-18 Hose Fittings. .... P/N 12-01198 ..... $17.50
Ideal welding torch for aircraft construction. Allows less oxidation. minimal flux, reduced pressures and substantial materials savings. Fewer tips are required and hose fatigue is lessened. Perfect for steel and aluminum welding and cutting. Formerly known as the Dillon Mark III. P/N 12-16000 ... $468.00 Henrob Instructional Video.... P/N 12-05150 ..... $16.95
Adds easy shop mobility and provides shielding gas bottle platform, handy storage drawer and two filler rod holders. P/N 12-00764 .........$198.50
UNDERSTORAGE CART
Contains four different tools. Simple tip/accessory installation allows you to convert into a soldering iron, blow torch, hot blower or hot knife within seconds. Quickly cut and seal repairs on dacron, mylar and nylon. Cordless, go-anywhere versatility, 90 minute continuous use capacity, refills in 20 seconds with standard butane lighter fuel, and full 2 year warranty. P/N 12-20600 ............. $71.50
Includes twist-mate connector. 12.5 ft. cable length. P/N 12-00765 ...........$50.75
One complete easy-to-order kit packaged in its own portable carrying case. Includes: PTA-17 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, Twist-mate adapter, work clamp and cable. P/N 12-00767 ........... $308.95
755
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Keep parts and pieces from taking off. Cut clutter and down time. ......... Everyone needs one or more - at work or at home, innovative parts carts people become very attached to their parts carts. They re virtually indestructible. Make users more efficient, productive and better organized - plus theyre good looking and customizable.
* Industrys easiest-nesting /catalog. * Perfect size for lighter-hit jobs. * Makes a great portable workstation. * High-carbon, heat-treated steel shelf brackets for years of trouble-free use. * All shelves have upper side rails to prevent parts slide-off. * Four industrial grade total-lock caster wheels for mobility; zero movement when locked. * Durable powder coat finish stays newlooking longer. * Shown with optional Shelf Mat. * U.S. Patent #7,314,413 * Other Patent Pending. * 42W x 31D x 44H * Shelves measure 40W x 24D * Shelves adjust every 3 * Weight rated to 125 lbs. per shelf * Includes: * 2 adjustable shelves * 2 adjustable support arms * 2 bungee cords * 6 metal hooks * 73 lbs. PN 12-02023 ......................$288.95
AW200 AIRLINE SERIES OXY-ACETYLENE USE IN: Torch Handles - AW1A & AW10A. For Metal Thickness Part No. Price Up To 1/32 AW201 $36.25 1/2 AW203 $35.75 1/8 AW205 $33.25
ONE SINGLE FLINT LIGHTER P/N 12-01194 ............$4.60 Box of Six Extra Flints for Lighter P/N 12-01193 ............$4.35
* Industrys easiest-nesting /catalog * 30% more shelf positions that any other parts /catalog. * High-carbon, heattreated steel shelf brackets for yeas of trouble-free use. * All shelves have upper side rails to prevent parts slide-off * Four industrial grade total-lock caster wheels for mobility; zero movement when locked. * Durable powder coat finish stays new-looking longer. * Assembles in less then 20 minutes. * U.S. Patent #7,314,413 * Other Patent Pending. * 42W x 31D x 75H * Shelves measure 40W x 24D * Shelves adjust every 3 * Weight rated to 125 lbs. per shelf * Includes: o 3 adjustable shelves o 2 adjustable support arms o 2 bungee cords o 6 metal hooks * 92 lbs. PN 12-02024 ......................$364.00
Quality aluminum case with rustproof stainless steel wire. The long spiral cleans a large number of tip styles. A hardened steel file included in each case. P/N 12-05180 ............ $2.95
TIP CLEANERS
This heavy duty red cloth is made from .015 thick fiberglass with a Hypercote finish. It resists abrasion and liquids, cuts without fraying, is electrically non-conductive and chemical resistant, and drapes easily. P/N 12-19500 .......$14.90/lineal yd. The best way to mark tubing. Will not corrode tubing and shows up well on greasy tubing. May be used to mark exhaust system without lead cracking P/N 12-05190 ............ $3.95
* Easiest shelves in the industry to adjust. * Provides 32 sq. ft. of shelf space! * High-carbon, heat-treated shelf brackets for years of trouble-free use. * All shelves have upper side rails to prevent parts slide-off. * Durable powder coat finish stays new-looking longer. * Shown with optional RO Holder. * U.S. Patent #7,314,413 * Other Patent Pending. * 42W x 50D x 75H * Shelves measure 40W x 24D * Shelves adjust every 3 * Weight rated to 125 lbs. per shelf * Includes: o 6 adjustable shelves o 4 adjustable support arms o 2 bungee cords o 6 metal hooks * 152 lbs. .PN 12-02025 $518.95
SILVER PENCILS
756
BLASTING SYSTEMS
The 3-in-1 Handy Blaster is a portable handheld blaster that allows you greater flexibility for a number of abrasive blasting applications. Features a powerful gravity-fed design, adjustable flow, vented tank, easy-squeeze trigger and hardened steel mixing chamber. Whats included: (1) Handy blaster (1) Spot blaster attachment (4) Adapters (1) Blast recovery bag Specifications: Operating PSI: 110, working Pressure: 80-110 PSI Air Consumption at Load (CFM): 12 at 110 PSI, Recommended Media: fine to medium, Fitting Size: 1/4 in. NPT, Tank Capacity: .9 liter, Gun Included: Yes, Dimensions L x W x H (in.): 11 x 11 x 5, Manufacturer Warranty: 12 months parts / 12 months labor, Ship Weight: 2.0 lbs P/N 12-02649 .......... $52.95
A new portable blasting system for cleaning and surface preparation of metal, plastic, fiberglass or wood. Ideal for graffiti removal from brick or stone surfaces. Dee-Blast system consists of an abrasive hopper 20-1/2 high and 9-1/2 diameter molded PVC drum with tight fitting top to keep abrasive media clean. Hopper holds up to 65 lbs. of media. It has a 10 ft. long rubber hose, a full-length face shield and a trigger-operated blasting gun that completely mixes air and media to produce a uniform spray pattern. P/N 130 ................. $168.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This portable 28-gallon vacuum unit blasts, removes and recycles abrasives in one operation. It works with glass beads, aluminum oxide, steel grit, garnet, plastic grit, walnut shells, corn cobs and more. Rolls easily on 6-inch wheels. Whats included: (1) 28-gallon vacuum blaster (1) 8-ft. air and vacuum hose (1) Gun and brush assembly (1) 6-ft. power cord (2) Wheels (1) Replacement nozzle Specifications: Operating PSI: 115 - 140 (Max), Capacity: 28 gallons, Vacuum moter: 1100 watt, 120V, 1.5 HP, Air Consumption at Load (CFM): 15 at 80 PSI, Body Material: Steel, Body Finish: Powder-coated, Recommended Media: Glass beads, aluminum oxide, steel grit, garnet, plastic grit, walnut shells, corn cob, Hose length (ft.): 8, Nozzle Size (in.): 1/4, Tire Size (in.): 6 Dimensions L x W x H (in.): 15 x 15 x 41, Manufacturer Warranty: 1 year limited warranty, Ship Weight: 88.0 lbs P/N 12-02647 ........ $636.95
The Monster Blast Cabinet is constructed of 14-gauge steel for strength and durability. It features a built-in dust collector and large work area to handle bigger pieces. Foot pedal control and side-mounted light switches for easy control. Whats included: (1) Blast cabinet (1) Blast Gun (4) Nozzles (two 7/32in., two 9/32in.) (1) Air regulator (2) Blast gloves (1) Foot pedal (4) Fluorescent lights (5) Extra window and (5) extra light underlayment sheets Features: Large front door for easy loading. Heavy-duty 90 CFM dust collector improves visibility during blasting. Rear-mounted dust collector saves floor space. Convenient foot pedal operation. Large work area. Large viewing window: 30 inches x 15 inches. Heavy-duty steel grate holds up to 400 pounds! 4 fluorescent bulbs provide a very bright work area. Monster-sized 443 pounds! Heavy-duty 14 gauge steel has a resilient powder-coated finish. Gas-charged hydraulic hinges provide smooth and easy opening / closing Power controls are lighted and within easy reach on side of cabinet Blast-gun hook inside cabinet. P/N 12-02648 ..... $2,155.00 100 CFM dust collector included with all steel cabinets. HD 14 gauge steel - welded seams. Full width top door. Optional additional side door. Optional foot pedals or ALC pistol grip trigger gun. High quality lined 24 gloves. Cushioned foam armholes. Specifications: Work Area: 36 or 48 or 60 W x 24H x 24D, Height: 60, Door Options: Double Doors, Top Door Opening: 13 x 35, Side Door Opening: 11 x 17, Gun Options: Foot Pedl, Weight: 36 - 272, 48 - 303, 60 - 333. Cabinet 36 .......... P/N 12-02563...... $1,747.27 Cabinet 48 .......... P/N 12-02564...... $1,795.00 Cabinet 60 .......... P/N 12-02565...... $1,879.00
The Port-A-Blast sand blast gun is a complete sand blast unit. Fill the container with the abrasive material, connect the gun to your air line and it is ready to go to work. Will operate on air pressure as low as 60 PSI. However, for best results, pressures of 100500 PSI are recommended. The greater the pressure the faster the cutting. The gun can be used to siphon abrasives or liquids directly from a hopper or bucket, using a flexible siphon tube, and eliminating the 1Qt. container. Compatible Abrasives: Silica Sand - the cheapest and most widely used for average work. Glass Beads Black Beauty Abrasive Aluminum Oxide Abrasives - for fast cutting and fine texturing and etching. Nut Shell Abrasives - for cleaning and polishing hard under surfaces without scratching. Metal Shot - for removal of hard surfaces such as porcelain. Port-A-Blast gun ............................. P/N 12-00172 ..... $59.95 Flexible siphon tube ....................... P/N 12-00173 ..... $10.95 Replacement Ceramic nozzle ........ P/N 12-00493 ..... $15.40
PORT-A-BLAST SANDBLASTER
CABINET BLASTERS
These Portable Pressure Blasters are designed to make the most efficient use of your air and abrasive supply. These are not inexpensive siphon units. The entire tank is filled with air and sand under pressure. When the nozzle and valve is opened the sand/air mixture is released under tremendous pressure to quickly remove paint, rust, scale and other coatings. These units are 3-5 times faster to use than siphon units. All units arrive complete with air gauge, pressure vessel, sandblast hood, and sandblast hose. Simply fill Model 1000 with abrasive and attach to your air supply and you are ready to begin blasting. Order by Part no. ABRASIVES Black Beauty: Economical, fast cutting abrasive. For quick removal of paint and rust. 80# bag. P/N 12-20740 ....... $47.50
Model 400
Spec. Chart Operating Pressure ASME Tank Sandblast Hose Abrasive Capacity Nozzle Size Part Number: Price:
Model 400 60-125 psi No 7 feet 40-50 lb. 3/32 12-20725 $496.00
Model 1000 60-125 psi Yes 10 feet 100-120 lb. 1/8 12-20735 $785.00
30x20 Bench Top Blast Cabinet Features: Made of tough LDPE polymer One-piece construction (no leaks) Selfadhesive underlay Pistol grip trigger gun Overside top window/door Specifications: Work area: 30W x 27H x 20D Height: 28 Weight: 34 lbs. P/N 12-02857 ........ $465.00
48x24 Triple Door Blast Cabinet Features: Full width top door Two side doors Foot pedal Flourescent light 90 CFM dust collector attached Pressure regulator Replaceable window underlays Includes 4 nozzles Some assembly required. P/N 12-02858 ..... $1,345.00
757
This very accurate bourdon tube tire gauge offers precision pressure control and a rugged steel case with rubber shock-absorbing cover. It comes complete with a 12 long flexible braided hose, a bleeder valve, and stop hand. It is easy to read the pressure on this 2 gauge with 1 psi markings and 60 lb. range. Excellent for use on aircraft tires as well as cars and trucks. P/N 13-00437 ........... $16.85
With the flip of a switch, this battery operated, hand held unit, displays the actual tire pressure and tire temperature. Small removable electronic valve sensors transmit pressure/temperature to the LCD monitor within 25-50 feet of the aircraft. The sensors can be easily removed when adding air to the tires, and when placing the sensors back on the valve stems, will send the new pressure readings to the LCD monitor. These sensors replace the standard valve caps and stay on the tires during flight. Pressure range 0 to 80 PSI. Temperature range - 50 Centigrade to 145 Centigrade. The monitor also has an alarm setting for high or low pressure. The battery has an average life of two years. The product is warranted for 12 months from the date of purchase. Only rated to flight level 30 and 80 psi max. Not FAA Approved P/N 05-04367 .........$317.00 The Wireless Tire Pressure/Temperature Monitoring System for Trucks, Trailers, and Motor Homes. The monitoring system can measure real time tire pressure and tire temperature while the vehicle is either standing or in action. The tire pressure range is 0 to 180 psi. It will support 4 tires up to 22 tires. Installation can be accomplished by the owner/ operator of the vehicle or trailer. Depending on the distance to tires or the vehicle type, a booster relay may be required. An adjustable swivel mounting bracket allows the monitor to be mounted on the dash or windshield. All items of the system are battery operated with a life span of 12 to 24 months depending on use. The system can be transferred to other vehicles if desired. The conceptual drawing displays the monitoring system up to 10 tires, by adding more sensors and relays, the system will expand up to 22 tires. ........................... P/N 05-04849 ................$469.95 Tire Dog Sensor ................................... P/N 05-04850 ..................$50.00 Tire Dog Wireless Relay ....................... P/N 05-04851 ..................$75.00 Industry standards permit aircraft tires to lose as much as 1% of their pressure each day, and even mild underinflation can allow temperatures to rise exponentially, sometimes resulting in heat-induced failures even while taxiing, company officials note. Underinflation can cause poor tracking and landings or even total failure of the tire or the wheel. Underinflation lengthens the takeoff roll and reduces the brakes predictability and effectiveness. Tool Testing Labs backlit digital gauge reads in PSI, InHg, Oz, SqIn, Inches or Feet, H2O, Kg, sqCm, Kpa, and Bar, with % tolerance and as fine as 0.1PSI resolution. It also holds peak readings, and features a built-in bleeder valve. Features: 300 PSI gauge, Accuracy 1% Full Scale 300 PSI Rated Hose Rubber Boot, Dual Foot Chick, Swivel Footing on Gauge ..................... P/N 12-02638 ................$109.85 300 PSI Gauge, Accuracy % of Full Scale, 4 Digit Display - Shows pressure in tenths of PSI 300 PSI Rated Hose Dual Foot Chuck (Other Chucks Available), Protective Rubber Boot, Swivel Fitting on Chuck Backlight Button for Low Light Conditions, Zero Button Reads in PSI, Bar, KPa and 5 Others Peak Hold Reading Manual and Auto Shutoff, Uses two AAA Batteries (2000 Hrs Usage Typical) Pressure Bleeder Valve, Storage Case, Fresh Certification ........ P/N 12-02637 ................$269.50 300 PSI Gauge Accuracy % of Full Scale. 4 Digit Display - Shows pressure in tenths of PSI. 300 PSI Rated Hose. Quick Disconnect. Protective Rubber Boot. Swivel Fitting on Chuck. Backlight Button for Low Light Conditions. Zero Button Reads in PSI, Bar, KPa and 5 Others. Peak Hold Reading. Manual and Auto Shutoff. Uses two AAA Batteries (2000 Hrs Usage Typical) Pressure Bleeder Valve. Storage Case. Fresh Certification. 1 year Warranty P/N 12-02639 ................$325.00
TIRE DOG
Once the tire & wheel have been removed from the airplane, the air is let out of the tire. The Tire Bead Breaker is used to break the bead or bond between tire and wheel. The TBB let you safely break this bead almost without effort & with- out doing damage to the expensive cast wheels. One broken wheel half can easily cost more than the Tire Bead Breaker! The Tire Bead Breaker adjusts to fit tires as small as tailwheel tires and as large as those tires found on large, corporate cabin planes. Can be used on both tube and tubeless tires. P/N 12-16790 ........ $127.50
The universal design of this tire bead breaker accommodate tube type and tubeless tires. It is easily adjustable for a wide range of tire sizes up to as large as tires for Twin Beech and Aero Commanders. Features all steel construction. P/N 13-02360 ........ $213.00
758
AIRCRAFT JACKS
MEYERS HYDRAULICS AIRCRAFT JACKS
Meyers Hydraulics have been recognized as the industry standard for aircraft jacks for over 25 years. Professional mechanics rely on the AJS Jack Set for applications requiring heavy-duty lifting capacity, smooth maneuverability, and reliability. Refer to the Application Chart below for the components required for your aircraft, and then order from the price list accordingly. Jack pads provide a cradle for the main landing gear legs. The cradle design securely holds the landing gear providing a safe jack point. The adjustable jack pad fits flat spring gear. The round gear jack pad fits the models listed below. Save time when servicing tires, wheel bearings and brakes Lift only the wheel instead of the whole aircraft Eliminate the unsafe practice of stacking wood blocks under a bottle jack All parts pack away neatly into a sturdy weather resistant toolbox Made in USA FLAT PIVOT POINT ADJUSTABLE JACK PAD - * Adjust width, taper and angle adjustment. * Adapts to many jacks. Shown with bottle jack. * Fits: Cessna C-120, 140, 150, 170, 172, 175, 180, 185. 182, 188, 190, 195, 205, 206, 336, 337, flat gear 177RG, Piper Tomahawk, Beech Skipper, Champion, Bellanca, and similar spring steel landing gear. P/N 12-00837 ...........$62.75
JACK PADS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Aircraft Aero Commander Beech: Model 50, King Air, Queen Air Beech: Bonanza, Debonair, Travelaire, Baron Mooney Piper: All except Navajo & Aerostar Piper Navajo & Aerostar Cessna: Cardinal RG Cessna: All high wings RGs except Cardinal Cessna: All 300 & 400 Series Navion Part No. Description 12-21405 A-5 Jack 12-21410 A-6 Jack 12-21415 ATS Tail Stand A427 Jack 12-02281 w/ AT42727 (27/46) 12-21435 AJL Leg 12-21440 AT-1 Tube 12-21445 AT-2 Tube 12-21455 AT-3 Tube 12-21460 AT-4 Tube 12-21465 AT-28 Tube 12-21470 ATC-4 Cap 12-21475 ATC-8 Cap
Jacks (2) A-6 (2) A-6 (1) A-5 (2) A-5 (2) A-5 (2) A-5 (2) A-6 (2) A-6 (2) A-6 (2) A-5 (2) A-5 Price $596.00 $698.00 $177.95 $640.00 $81.25 $55.85 $66.75 $69.75 $89.75 $59.50 $58.75 $72.25
Tailstand (1) ATS ----(1) ATS (1) ATS (1) ATS (1) ATS (1) ATS (1) ATS --(1) ATS AJS A-5 w/AT-1* A-5 w/AT-28 A-5 w/AT-3 A-6 w/AT-2* A-6 w/AT-4 A-6 w/AJL ATC-4 Cap ATC-8 Cap
Tubes & Caps (2) AJL (2) AT-4 ------(1) AT-3 Legs ---------------
--(2) AT-4 --(2) ATC-8 (2) AT-4 (2) AJL (2) ATC-8 (2) AT-28 --(3) ATC-4 --- (2) AT-28 Height Ranges 22/36 28/42 34/58 34/58 54/78 Legs+10 +1 to 4 +1 tp 8 30/51
ROUND JACK PAD ADJ-R - ack pads provide a cradle for the main landing gear legs.The ADJ-R has a half round design cradles the landing gear safely. Pivots on a machined bottle jack extension. Use with Cessna C-172RG, 177RG, 182RG, 210, T210, P210, and similar landing gear P/N 12-00679 ...........$62.75 C300 JACK PAD ADJ-300 - * Cessna 300, 400 & 500
series * Perfect for the Conquest & Citation. * Sold in Singles. P/N 12-00683 ...........$62.75
* Bottle Jack Extensions will fit any 1-1/4 O.D. ram. * Typical 6 ton jack has a 1-1/4 O.D. ram. * Extensions are machined & slide together for easy stacking. * Use on aircraft with a jack point pin. * Not the same extensions as found in the Aero Jack Kit below. * No special jack pad needed on tubular C-152, 172, 182 etc. 1.5 extension ........................P/N 12-00156 ...........$22.75 3 extension ...........................P/N 12-00157 ...........$23.75 8 extension ...........................P/N 12-00158 ...........$26.50
JACK EXTENSIONS
ATS Tailstand
Today's jet and turbo-prop aircraft weighing up to 32,000 lbs. are too valuable to consider using anything less than the A300 Series Aircraft Jacks from Meyer Hydraulics. For over 45 years, Meyer Hydraulics has manufactured aircraft jacks that continue to set the standard for safe, dependable lifting. This line of professional lifting equipment handles aircraft weighing up to 32,000 pounds with the security and features one should demand in an aircraft jack. Features: (A) ANTI-SWAY ANTI-SNAG GUIDANCE SLEEVES (B) CONVENIENT HOLE SPACING (C) POSITIVE SAFETY LOCK: Spring loaded safety pin "pops" into the slide tube to prevent accidental lowering (D) LARGE DIAMETER ROUND FRAME TUBE (E) SIX 3" SPRING LOADED CASTERS: The steel leg pads never scuff across the hanger floor (F) LOW HEIGHT LEG DESIGN: Provides maximum gear door clearance with one section completely free of any protrusions. The three 26" legs create a wide stance insuring stability. Meyer Model No. A322B A325B A328B A330B A334B A334C A340C A342B A342C A355C A360A Old No. Capacity Low High Lifting Part No. Range 14" 17" 20" 22" 26" 26" 31" 33" 33" 40" 40" Price
Includes one complete AJS Jack system (describes above) plus one A-5 Jack with AT-1 tube, one AT-28 tube, and one ATC-4 cap. A very popular Jack system for general aviation maintenance. P/N 12-01378 .................. $3,357.00 Designed primarily for the new class of aircraft called Very Light Jets (VLJs). Ultra low height and the maximum stroke range necessary for the large landing gear movements found on these jets. Features: (A) Steady Knobs (B) Convenient hole spacing (C) Positive safety lock prevents accidental lowering. (D) Anti-snag round tube (E) Three 3" spring loaded casters (F) Low-height leg design. A419 - height range 19"-34" .....................P/N 12-02290 ............$638.00 A421- height range 21"-38" ......................P/N 12-02291 ............$645.00
A-10 16,000 lbs. 22" 36" A-2516 16,000 lbs. 25" 42" A-9 16,000 lbs. 28" 48" A-11 16,000 lbs. 30" 52" A-17 16,000 lbs. 34" 60" A-1724 24,000 lbs. 34" 60" A-15 24,000 lbs. 40" 71" A-13 16,000 lbs. 42" 75" A-1324 24,000 lbs. 42" 75" A-5524 24,000 lbs. 55" 95" A-60 10,000 lbs. 60" 100"
12-02668 $1,056.00 12-02669 $1,080.00 12-02670 $1,109.00 12-02671 $1,112.00 12-02672 $1,127.00 12-02673 $1,257.00 12-02674 $1,292.00 12-02675 $1,197.00 12-02676 $1,306.00 12-02677 $1,620.00 12-02678 $1,306.00
759
AIRCRAFT JACKS
CM WP ME HA AP LG
Mooney Jack Points (Sold Individually) 12-01375 $24.50 each Constructed of welded square steel tubing. The three leg design clears close tolerance gear doors, such as Bonanzas and Barons. All models have machine jack point centering cap with casters, jack handle holder and positive locking jack point centering cap with casters, jack handle holder and positive locking collars. Oversize shipping charges apply. Aircraft Jacks Piper and Mooney Jack and other light twins and singles Height 26-45. Cylinder Capacity **6,000 lbs.
Note: Mooneys require 26 clearance plus room for the cap or the Jack will not fit.
AIRCRAFT JACKS
Image
Part No.
Price
The Aero Jack System saves time when changing tires or working on landing gear. Use a combination of innovative tools packed in a handy toolbox. Designed by an A&P, for do-it-yourselfers and other mechanics, three kits are available depending on your needs.
Description Complete Aero Jack System - Service both flat and round gear from a handy toolbox. Flat Gear Aero Jack Kit - Cessna C-120, 140, 150, 170, 172, 175, 188, 182, 190, 195, 205, 206, 336, 337, flat gear 177RG, Piper Tomahawk, Beech Skipper, Champion, Bellanca, and similar landing gear. Round Gear Aero Jack Kit - Cessna C-172RG, 177RG, 182RG, 210, T210, P210, and similar landing gear. Expandable Aero Jack System - Included in the tool box is: Bogert Tribal Jack with all the jack pads. (C210, RG, R, FPP, Moon, Musk, C300). Weight is 30 lbs. Part No. 12-00254 Price $235.95
12-99115 $314.95
12-00681
$209.95
12-00682 12-02096
$201.95 $822.95
12-99130 $184.95
JACK POINTS
Aircraft Jacks Cessna Jack Points Spring Gear Type Image Part No. Price
12-01374 $49.50
Aid aircraft maintenance, such as servicing brakes, working on bearings, or changing tires. Maximum load of 2,500 pounds and can be used on Piper aircraft, Musketeer, Mooney, and many more aircraft with near-vertical landing gear. Lower clearance lifting pad which allows jack owners to begin lifting from a 2 1/2 starting position and up to 12. It can be used on main gear, nose gear and the tail wheel. Made in USA. P/N 12-00838 ........ $186.95
EP CS IN EL AV TO PS BV
This Jack Lift Pad is quality made of alloy steel and is adaptable to all bottle type hydraulic jacks. The serrated vee design provides positive holding. It is easy to install and proves a great variety of applications. P/N 12-30270 .......... $45.60 The Dolly-Jack is a self contained, portable system that can lift any main wheel or nose wheel with the turn of crank for routine maintenance and tire changes. It allows the plane to spin around in its own space. Made in the USA using 4130 Chromoly material. FITS THESE PIPER: Arrow, Lance, Saratoga (RG), Malibu, Matrix, Meridian, Seminole. FITS THESE BEECHCRAFT Bonanza, Baron, Travel Air, T-34 P/N 13-03380 ......... $878.00 Dual Action Hydraulic Pump. Pump Handle is Included. Flat Bottom Design. Threaded Mounting Hole in Bottom. 1 Year Warranty 3 TON LONG RAM FB 22.5 JACK - Collapsed height - 22.5 inches. Stroke - 18 inches. Maximum extended height - 40.5 inches. Shaft diameter - 1.25 inches. Pin hole diameter - 5/8 inch. Weight - 20.5 pounds P/N 12-02445 ..........$63.50 3 TON LONG RAM FB 24.75 JACK - Collapsed height - 24.75 inches. Stroke - 20.5 inches. Maximum extended height 45.250 inches. Shaft diameter - 1.125 inches. Pin hole diameter - 5/8 inch. Weight - 22.5 pounds P/N 12-02446 ..........$68.75 8 TON LONG RAM FB 24.25 JACK - Collapsed height - 24.250 inches Stroke - 20 inches. Maximum extended height - 44.250 inches. Shaft diameter - 1.250 inches. Pin hole diameter - 5/8 inch. Weight - 25.5 pounds P/N 12-02447 ..........$72.85
LITTLE LIFTER II
REDLINE DOLLY-JACK
P/N 11-06948 .........$154.95 * Lightweight, 10 lbs * Lift Range 2.75 to 13.5 * 4 pivoting pads included * Us with 800X6 tires or larger * Picture shown with 2 liter bottle LITTLE LIFTER III P/N 11-06949 .........$164.95 * Lightweight, 13 lbs * Lift Range 2.75 to 19.25 * 4 pivoting pads included * Use with 31 tires
The RV 8 Travel Jack was designed and manufactured by RV-8 builder / pilot Steve Jackson. All steel construction, weighs less than 3 pounds. Jack mast easily removes from base plate for compact storage. Uses 3/4 wrench to operate (wrench not included). Tested to 1350 pounds. Has securing arm that positions between the gear leg & brake to stabilize the jack works on both left and right gear leg with a simple adjustment. Base measures 3-1/2 X 8; mast stands 10 tall. Designed for RV-8 flat spring gear legs (only -- will not work on the other RVs with round gear legs). P/N 12-03170 ........ $130.00 Someday youll need to jack up your aircraft to install new tires, clean & grease wheel bearings, or fix a flat. This nifty jack stand is safer than using an engine hoist or the wing tie down location. Requires a modification to the axle nuts (about 1 hour). Kit includes the axle jack arm, axle nut modification hardware, & directions to modify the nuts. For hollow axles (Wittman style) Gear only. Uses automotive bottle jack. Jack not included. Not for RV-8s. For RV Gear Legs with Hole in Axle. P/N 12-00634 ....................$49.85
RV 8 TRAVEL JACK
The Landing Gear Safety Stand is a must! Anyone that has ever seen a plane slip off a jack knows! The stand slips on over the axle when ever the wheel is removed. Put the nut back on and the plane cant slip off the stand. It adjusts for height with a quick release pin. The wide, stable H base is made from heavy gauge square steel tubing for strength, safety and durability. The unique stand is finished in an attractive, bright red powder coat finish. LGSS-2, has a 12 x 12 base with adjustable axle height of 10-15, and LGSS-3 has an 18 x 18 base with adjustable height of 14-21.5. 9 Stand ..................P/N 12-02015 .......... $98.85 12 Stand ................P/N 12-00255 .......... $56.75 18 Stand ................P/N 12-00256 .......... $78.00
The tool every mechanic needs! * Lift nose wheel without jacking up whole plane. * Service nose wheel & strut effortlessly. * Support a new propeller during installation. * Use with 2 and 3 blade props. * 4-point stability with tail & wing jacks. P/N 12-16718...................... $83.95
760
AIRCRAFT JACKS
THREE TON HYDRAULIC AIRCRAFT JACKS
MODEL #324 3 TON LOW WING JACK - Eliminates the frustration of
having unstable jacks that conflict with landing gear components and gear doors adjacent to your jack point. These jacks are especially appreciated by owners of Bonanza, Mooney, Comanche, & Twin Comanche Aircraft for the manner in which they may be positioned clear of the inner gear door hinge. Model #324 provides an easy slide under fit on aircraft with lower jack points. double action 3 ton (6,000lbs) hydraulic cylinder jack point centering cap locking safety collar secures the load rugged heavy gauge steel construction stable three leg design clears gear doors convenient handle storage. Effective Range: 24-40 Ram Capacity: 6000lbs P/N 12-01724 ..................$229.00
CM WP ME HA AP
MODEL #326 3 TON LOW WING JACK - 26 - 43 Eliminates the frustration of having unstable jacks that conflict with landing gear components and gear doors adjacent to your jack point. Owners of BeechCraft Bonanza 33/35/36 aircraft especially appreciate these jacks for the manner in which they may be positioned clear of the inner gear door hinge. If the only plane youll be lifting is the Bonanza please see Model #324. jack point centering cap to assure the aircraft stays on the jack. double action 3 ton (6,000 lb) hydraulic cylinder. locking safety collar secures the load. rugged heavy gauge steel construction. three leg design clears gear doors. convenient handle storage Effective Range: 26-43 Ram Capacity: 6000lbs P/N 13-05544 ..................$229.00
LG EP CS IN EL AV TO PS BV
ACCESSORIES WHEEL KIT FOR HYDRAULIC TAILWEIGHT EXTENSION FOR AIRCRAFT JACKS TAILWEIGHT POST
Add Wheels to our Model #324, #326 or #332 The base that comes standard with all of our aircraft jack models is pre-drilled to easily allow for the addition of a Wheel Kit. This Kit Includes: 1 Left Bracket, 1 Right Bracket, 2 Wheels, Hardware Packet, Installation Instructions P/N 12-02032...........................$50.25
Adds on an additional 12 inches to the Tailweight Post model 375. For higher wing aircraft. P/N 12-02033...........................$27.50
761
SAFETY EQUIPMENT
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The Hobbyair Pro 1 is a fresh air breathing system specifically designed for the amateur painter which allows only fresh air to reach the users lungs. It features a comfortable, lightweight facemask with beltline hook, simple snap together fittings, and is very affordable. Includes the pump unit with two stage, single speed, air bypass type motor, mask, belt and 40 foot delivery hose, fittings, filter, cord and case. The Buddy System Hobbyair is designed for two people and includes two 40 ft. delivery hoses. 1 yr warranty. Excellent for use in homebuilt aircraft construction and painting. Hobbyair Pro 1 (1/2 mask) 110V ............P/N 12-15850 ........ $397.00 Hobbyair Pro 1 (1/2 mask) 220V ............P/N 12-15860 ........ $499.95 Buddy System Hobbyair (110V)..............P/N 12-15870 ........ $532.00 Hobbyair Pro (Full mask) ........................P/N 12-15851 ........ $498.75 Hobbyair II ...............................................P/N 09-00633 ........ $445.95
HOBBYAIR RESPIRATOR
Helps provide worker protection against certain non-oil based particles. Comfortable, easy to use, and promotes greater worker acceptance increasing wear time. Features 3Ms P/N 09-01496 P/N 09-01497 patented filter media, nose foam, and adjustable noseclip that helps provide a secure seal and helps reduce eyewear fogging. Workplace applications: woodworking, grinding, sanding, sweeping, bagging, other dusty operations. Description 8210 Standard dust mask Vented dusk mask Part No. 09-01496 09-01497 Price $0.98 $2.35
3M PARTICULATE RESPIRATORS
FLYING/SAFETY GLASSES
Hobbyair Buddy System comes standard with an air pump, 2-40 hoses and a half facemask (HF01)for one person. Locate the intake air pump in a fresh air location and breathe HEPA filtered clean fresh air in most contaminated breathing environments. .......P/N 12-02365 ........ $733.00 Full Facemask Lens Protectors - Sold in package containing 25 lens protectors. Apply one at a time over full facemask lens. Clear covers protect your lens from overspray and lengthen the life of your facemask. ..........................................................P/N 12-02366 .......... $19.95 Allows its user to achieve show plane quality results to a level never before possible with a turbine powered system. The CITATION 4 offers a much higher PSI range without sacrificing the benefits of HVLP such as lower overspray, the elimination of moisture and high transfer efficiency. This is all accomplished with a more powerful, yet quieter and cooler running turbine blower. Like the standard CITATION, this new system, of course, offers the additional benefit of a built-in supplied-air respirator to assure breathing protection for its user. P/N 12-00973 ..... $1,176.00
Meets or exceeds ANSI requirements Provides 99.9% protection against harmful UV radiation High impact scratch resistant polycarbonate lens Adjustable temples for greater fit & comfort Replacement lenses Gray ...................P/N 13-02823 ............ $0.50 Amber ................P/N 13-02825 .......... $11.95
3M PROTECTIVE EYEWEAR
PROFESSIONAL SAFETY GLASSES For the professional or serious do-it-yourselfer Ideal for outdoor use (PN 13-90751) Clear and Black ................... P/N 13-90750.......$7.75 Tinted grey and Black .......... P/N 13-90751.......$7.95
Each AOSAFETY Centurion goggle TEAR-NWEAR replacement lens protectors stack contains seven layers of high quality optically clear film. When the outer layer is soiled, scratched, or difficult to see through, simply "tear" the soiled layer off by pulling the tab horizontally from right to left. You now have clean and clear vision again and the next tab is automatically ready for your next tear away. P/N 12-00894 .................................$7.25
CITATION 3 STAGE HVLP PAINT SPRAYER & RESPIRATOR W/ BOTTOM FEED GUN - Standard One man
System Includes: Citation Dual HVLP Pump, Two 40' hoses, one sprayer & one respirator, Half facemask & belt, Bottom Feed HVLP Paint Spray , Gun with Quart Cup, Complete System and Spray Gun Manual, Introductory 'How to" Spray Manual, 3 Stage Sprayer Specs: 110-120V VAC, 50/60HZ, Amps: 11.5, PSI: 5.5 One Man Respirator: 110-120V VAC, 50/60 HZ, Amps: 1.6, Cfm: 7 @ Facemask Two Man Respirator: 110-120V VAC, 50/60HZ, Amps: 7, Cfm: 7.5 @ Facemask P/N 12-02372 .......................$993.00
These safety spectacles feature a contoured shape which offers unobstructed vision, excellent side protection and comfort fit bridge. Front color and temple color is black. Lens and sideshield color is clear P/N 13-01310 .......$8.85/ea.
SAFETY SPECTACLES
CITATION 3 SPRAYER & RESPIRATOR W/ GRAVITY GUN - Standard One man System Includes:
Citation Dual HVLP Pump, Two 40' hoses, one sprayer & one respirator, Half facemask & belt, Gravity Feed HVLP Paint Spray Gun with 1000 ml Cup, Complete System and Spray Gun Manual, Introductory 'How to" Spray Manual 3 Stage Sprayer Specs: 110-120V VAC, 50/60HZ, Amps: 11.5, PSI: 5.5 One Man Respirator: 110-120V VAC, 50/60 HZ, Amps: 1.6, Cfm: 7 @ Facemask Two Man Respirator: 110-120V VAC, 50/60HZ, Amps: 7, Cfm: 7.5 @ Facemask P/N 12-02373 .......................$996.00
Protects eyes from flying objects. Can be worn over personal glasses. Perforated mask reduces fogging. Fully adjustable elastic headband. Clear polycarbonate lens, 050 thick, is easily removed for cleaning. Meets requirements of ANSI Z87.1 Goggles ................................... P/N 91200 ........$5.85 Replacement Lens, Clear ........ P/N 91202 ........$1.75
IMPACT GOGGLES
CITATION 3 STAGE HVLP PAINT SPRAYER & RESPIRATOR W/ BOTTOM FEED GUN - Standard One man
System Includes: Citation Dual HVLP Pump, Two 40' hoses, one sprayer & one respirator, Half facemask & belt, Bottom Feed HVLP Paint Spray , Gun with Quart Cup, Complete System and Spray Gun Manual, Introductory 'How to" Spray Manual 3 Stage Sprayer Specs: 110-120V VAC, 50/60HZ, Amps: 11.5, PSI: 5.5 One Man Respirator: 110-120V VAC, 50/60 HZ, Amps: 1.6, Cfm: 7 @ Facemask Two Man Respirator: 110-120V VAC, 50/60HZ, Amps: 7, Cfm: 7.5 @ Facemask P/N 12-00973 ....................$1,176.00
Provides protection for the face and neck against chemical splash and flying particles. Replace. Window, Clear ....P/N 90030 ..........$7.25
CITATION 4 STAGE SPRAYER & RESPIRATOR W/ GRAVITY GUN - A standard system includes 2-40'
hoses (one breathing, one spraying), the Accuspray Professional Quality Bottom Feed Gun -71000 and Half Facemask -HF01A and belt. Any other options including a two man respirator system can be added for this unit. P/N 12-02374 ....................$1,349.00
Features durable construction and large size to cover the head, face, neck and shoulders to protect against the impact of high velocity abrasives. Made with super-heavy 10.38 oz. army duck canvas treated with high water repellant and mildew resistance. Complete with an ERB Safety built-in construction type hard hat that meets ANSI Z89.12003 (Type 1, Class E, G & C) and complies with OSHA regulations for industrial head protection. Scarab Sand Blast Hood .........P/N 12-01665 ........$85.75 Scarab Lite Sand Blast Hood ..P/N 12-01666 ........$39.95
ACCESSORIES
Lens for Scarab Blast Hood ...........................P/N 12-01667 ........$14.95 Screen for Scarab Blast Hood........................P/N 12-01668 ........$11.99
762
SAFETY EQUIPMENT
3M SAFETY GOGGLES
SAFETY GOGGLE BX
* BX protective eyewear are fully adjustable with three lens angles and adjustable nose bridge and temple length. Silver/ Black frames. Soft adjustable nose bridge Three lens angles for cozy fit Integrated sideshields. Protect your eyes from impact and block 99.9% UV rays. Polycarbonate anti-fog lens. Meets the requirements of CSA Z94.3-2007 and the High Impact Requirements of ANSI Z87.1-2003 P/N 09-02154............................ $4.35 This 3-position ear muff offers protection from high noise levels. Lightweight comfort, effective design combine to provide high performance attenuation. Can be worn over or behind head, under chin. P/N 97030 ................$12.65
HEARING PROTECTOR
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
OPTIME 105 HI-VIZ - NRR 30. Can be used for noise levels up to 105 dB. Bright Hi-Viz Yellow great for recognition of workers. P/N 12-02568 .............$27.75 OPTIME 101 - Over-the-head Hp. NRR 27. Can
be used for noise levels up to 101 dB. Color: Green P/N 12-16110 ...........$17.90
OPTIME 98 - Over-the-head Hp. NRR 25. Can be used for noise levels up to 98 dB. Color: Yellow and Black P/N 12-02569 ............. $14.25 OPTIME 95 - Folding hearing protector. NRR 21. Can be
used for noise levels up to 95 dB. Folding Slim design. Color: Beige and Black. P/N 12-02570 ...........$16.50
3M E-A-R EARPLUGS
Worktunes is a self-contained AM/FM noise attenuating headset (NRR 26db) which provides hearing protection combined with an AM/FM radio to provide. Features include: Easy finger tip controls 5 preset stations Volume limited to a safe 82 dB level Gel/Foam cushions MP3 cord included Peltor stainless steel spring arm headband provides even pressure all day. Wide, soft padded headband, flexible antenna. Quick and easy tuning and volume adjustments P/N 11-01589 .............. $81.75 The only muff that lets workers listen safely without removing their muffs. When workers lift their muffs, they lower their protection. Now Peltor puts safe listening at their fingertips. Just push the button on the PTL muff and speech & sounds outside the muff cup can be heard inside-- clearly and safely. After 30 seconds, the muff automatically returns to its full protection with an NRR of up to 26 dB. Listen again? Just push again. Its that simple. P/N 11-04310 ...........$37.95 Liquid foam ear cushions and adjustable stainless steel headband. Sized for junior and smaller adults. Features NRR 22 dB rating NRR allows range command to be heard for added safety Designed and sized for youth and smaller adults Liquid/Gel filled cushions Comfortable for extended wear Adjustable headband P/N 12-02845 ...........$91.25
3M PELTOR EARMUFFS
The David Clark Deluxe Model Hearing Protector provides maximum noise attenuation and optimum comfort. Features urethane covered ear seals, soft foam cushioned headband, military quality materials, finish and workmanship. P/N11-09205............$38.95 Designed to reduce aircraft engine noise for airport ground support crews as well as aircraft maintenance and technical personnel, the NoiseBuster Active Noise Reduction (ANR) Safety Earmuff combines an ANSI-rated 26NRR passive earmuff with active noise reduction electronics that deliver up to an additional 20 db of low-frequency noise attenua Powered by a AA battery, the earmuff is resistant to water, moisture, contaminants, mechanical shock, and vibration. Perfect for users who do not mechanical shock, and vibration. Perfect for users who do not require two-way communications capability but who can benefit from protection. Includes: * NoiseBuster ANR Safety Earmuff * One AA battery * 3.5 mm audio interface cable * Warranty - 6 months P/N 11-07369 ..........................$139.50
763
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The 3300 Series Mask is an economical half mask made of TPE material with a continuous grey color neck strap. Under the new particulate filter rules, there are three series of filters: N, R, and P. The N filters are Not resistant to oil; the R filters are resistant to oil; and the P filters are oil proof. The N series of filters is appropriate for airborne particles such as silica or lead, when there are no oil-based products also in the air.
For example, an N series filter would be recommended during the removal of old lead paint. However, for spraying an oil-based lead paint, an R or P series filter would be recommended as protection against the airborne mist of oil-based solvent. The R series (resistant to oil) should only be used for a single shift when solvent or oil mist is present in the air. This filter resists oil but may break down in contact with oil or solvent over a long time. When using P series filters, check the manufacturers instructions to determine how long the filter can be used when airborne particles are present. NIOSH originally thought that P series filters were oil-proof but recent tests have found there may be some breakdown of the filter material with long-term oil exposure. Note: N, R, and P filters do not provide protection against organic vapors. Kit includes 3300 Mask, 2 each N95 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02261 ...........$24.25 Kit includes 3300 Mask, 2 each R95 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02262 ...........$25.75 Kit includes 3300 Mask, 2 each P100 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02263 ...........$31.50
The 3500 Series Mask is a premium half mask made of Draeger Flex Material. Clasped Slide-Down feature with a black neck strap. Under the new particulate filter rules, there are three series of filters: N, R, and P. The N filters are Not resistant to oil; the R filters are resistant to oil; and the P filters are oil proof. The N series of filters is appropriate for airborne particles such as silica or lead, when there are no oil-based products also in the air. For example, an N series filter would be recommended during the removal of old lead paint. However, for spraying an oil-based lead paint, an R or P series filter would be recommended as protection against the airborne mist of oil-based solvent. The R series (resistant to oil) should only be used for a single shift when solvent or oil mist is present in the air. This filter resists oil but may break down in contact with oil or solvent over a long time. When using P series filters, check the manufacturers instructions to determine how long the filter can be used when airborne particles are present. NIOSH originally thought that P series filters were oil-proof but recent tests have found there may be some breakdown of the filter material with long-term oil exposure. Note: N, R, and P filters do not provide protection against organic vapors. Kit includes 3500 Mask, 2 each N95 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02264 ...........$34.85 Kit includes 3500 Mask, 2 each R95 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02265 ...........$36.95 Kit includes 3500 Mask, 2 each P100 filter pads, 2 each filter pad retainers, and 2 each filter pad bases. P/N 12-02266 ...........$42.75
The combo cartridge is a P100 filter, and also filters out organic vapor/acid, gas, formaldehyde, chlorine dioxide, and hydrogen floride. Kit includes mask and one combo cartridge. P/N 12-02267 ...........$21.75
The combo cartridge is a P100 filter, and also filters out organic vapor/acid, gas, formaldehyde, chlorine dioxide, and hydrogen floride. Kit includes mask and one combo cartridge. P/N 12-02268 ...........$34.65
The 3M Protective Coverall 4530 is disposable safety work wear made of lightweight, breathable polypropylene with flame resistance. Designed to be worn over primary FR garments, it helps provide protection against dusts and light liquid splashes. Features: Breathable material to help reduce heat buildup and promote comfortable wear. Knit cuffs with elasticized waist and ankles for increased comfort and freedom of movement Three panel hood design for compatibility with complementary PPE. Two-way zipper with sealable storm flap Reinforced gusset for increased durability. Flame resistant treatment offering secondary protection against heat and flames Anti-static coating on both sides. L........... P/N 12-02663 ...... $6.25 XL ....... P/N 12-02664.......$6.25 2XL ...... P/N 12-02665 ...... $6.25 3XL ..... P/N 12-02666.......$6.75 4XL ...... P/N 12-02667 ...... $6.75
The 3M disposable protective coverall 4520 key features include: Breathable material (SMMMS) to help reduce heat stress and comfortable wear. Elasticated waist, ankles, and wrists for convenience and freedom of movement. Three panel hood design for compatibility with complimentary PPE. Two-way zipper with storm flap for convenience and to help provide additional protection. Anti-static coating on both sides. Protect against light liquid splashes and hazardous dusts. XL ........ P/N 12-02692 ...... $3.90 2XL ..... P/N 12-02693.......$5.85 4XL ...... P/N 12-02694 ...... $4.75
The 3M Protective Coverall 4540 is disposable safety work wear made of a high quality laminated material with a breathable back panel for improved air circulation.Protection against light liquid splashes and hazardous dusts. Features: Constructed of a low-linting, non-woven, laminated microporous material with anti-static coating on both sides, Knit cuffs with elasticized waist and ankles for increased comfort and freedom of movement Three panel hood design for compatibility with complementary PPE Two-way zipper with sealable storm flap Reinforced gusset adds extra durability Breathable back panel to help improve air ventilation and reduce heat buildup. L........... P/N 12-02658 ...... $5.50 XL ....... P/N 12-02659.......$5.50 2XL ...... P/N 12-02660 ...... $5.50 3XL ..... P/N 12-02661.......$5.75 4XL ...... P/N 12-02662 ...... $5.75
764
OXYGEN SYSTEMS
Add to your flying comfort by using oxygen at altitudes as low as 5000 ft. Aerox Oxygen Systems include lightweight aluminum cylinders, regulators, all hardware, flow meter, Aerox 2D Aerox 4M and nasal cannulas (masks available as system system option). Oxysaver oxygen saving cannulas & Aerox Flow Control Regulators increase the duration of oxygen supply about 4 times, and prevent nasal irritation and dryness. Complete brochure available on request.
In the event that the primary oxygen system fails, the Pro-O2 provides oxygen until the aircraft can reach a lower altitude. And because Pro-O2 is refillable, there is no need to purchase replacement O2 cartridges. During short flights at altitudes between 12,500ft. MSL and 14,000ft. MSL where maneuvering over mountains or turbulent weather is necessary, the Pro-O2 emergency handheld oxygen system provides oxygen to extend these brief legs. Included with the refillable Pro-O2 is a regulator with gauge, mask and a refillable cylinder. Pro-O2-2 (2 Cu. Ft./1 mask) ...............P/N 13-02735 .........$328.00 Pro-O2-4 (2 Cu. Ft./2 masks) .............P/N 13-02736 .........$360.00
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The 4110-712 Series continuous flow oxygen mask with microphone is intended for crew and passengers in the general aviation industry at a maximum altitude of 25,000 feet. Optional equipment includes industry standard fittings for connection to portable and built-in oxygen systems. Description Small Without Microphone Medium Without Microphone Large Without Microphone Small Medium Large Aerox No. 4110-711-1 4110-711-2 4110-711-3 4110-712-1 4110-712-2 4110-712-3 Part No. 13-06652 13-06653 13-06654 13-06655 13-06656 13-06657 Price $189.50 $189.95 $195.95 $409.00 $380.95 $390.95
Aerox has introduced Smoke Goggles with face forming elastomer seals to keep smoke out. Aerox Smoke Goggles are the choice of the U.S. Special Forces. The case features reflective tape to make goggles easy to locate as well as a velcro strip on the back for mounting. Goggles .................. P/N 13-06173...........................$96.00 Soft Case ................ P/N 13-06174...........................$80.00 Bracket Assembly, SS, with Lock, or Cyl Diameter (2 needed per system) P/N: 13-04033 ......... $37.00 Whether making money or saving it, the Aerox FBO-1 Cascade Filling System makes it easy to fill all types of aviation systems, from portables to jets. The FBO-1 comes complete with 2 CGA 540 cylinder connectors, 6 high-pressure (3000 psi) braided stainless filler line, contents gauge, flow restrictor and adapters to fit Puritan-Bennett, Scott, and CGA 540 filler ports. P/N 13-04534.......... $360.00 AEROX CGA-540 SINGLE CYLINDER FILLING STATION - Transfills between cylinders quickly and easily. 6 braided stainless line, gauge, restrictor, and CGA 540 filler. P/N 13-04535.......... $185.95
AEROX ACCESSORIES
P/N 13-18910 13-18960 13-18920 13-18970 13-18930 13-18940 13-03271 Description CC Oxysaver Cannula MSK-C Rebreather Mask (Child) CR-A Regular Cannula Metal Clamp Bracket for 13 or 22Cft cyl CR-C Reg. Cannula (Child) MSK-A Rebreather Mask Aerox Oxysaver Pendant
The Aerox Retrofit Kit consists of 3 parts: PB-2 Old Style 1.) Oxysaver Cannulathis comfortable device may be used in place of PB-1 New Style your mask up to 18,000 ft. MSL. It has a conserving feature which can extend MS your oxygen supply by up to four FITTING IDENTIFICATION CHART times. 2.) Aerox Flowmeter/indicator (Not Sold Separately) this combination device conveniently reads both mask and cannula flow rates in MSL altitude. 3.) Aerox Adjustable Flow Restrictora thumb screw operated needle restrictor valve allows you to precisely control flow. Shown are most of the connectors for general aviation. If you want us to supply the connector, be sure to indicate which is your type.
Model RK-SC RK-PB-1 RK-PB-2 RK-SK RKCPC RK-SC Retrofit Kits Retrofit Kit plus Scott type fitting SC Retrofit Kit plus Puritan-Bennett type fitting Retrofit Kit plus Puritan-Bennett type fitting Retrofit Kit plus Sky-Ox fitting (new style)SK Kit with CPC fitting for Cirrus RK-SC with - Flow Meter Needle Valve Option Part No. 13-18992 13-18994 13-18995 13-18996 13-05152 13-05582 Price $112.00 $89.60 $89.60 $94.75 $98.50 $104.95
13-04538 $65.00
AEROXS PATENTED GLO-TEC FLOWMETER - Precision Adjustable, Direct inline oxygen flow indicator with photoluminescent technology for extended night-time visbility. PN 13-05251 ..............$54.50 AEROXS PATENTED GLO-TEC PRESSURE GAUGE - Pressure Gauge, 0-3,000 PSI, Rear Mount, with photoluminescent technology for extended night-time visibility. PN 13-05250 ..............$29.90
Fitted case with quick release, all point webbing. Available for "A", "C", "D", "E", and "M" cylinders. Doubles as a carrier with built in rubber handle. Webbing can remain on the seat when the case is detached. Internal velcro strap holds cylinder securely. Accessory pocket on side holds webbing for easy storage. Available in black. P/N 13-07084 .......................$69.95
See www.aircraftspruce.com for our full line of Noral Oxygen Canula Carriers.
765
MD300 C201 is intended for noninvasive spot-check measurement of function oxygen saturation of arterial hemoglobin(SpO2). It can be used with adult and pediatric and widely used in family, clinic and hospital. Features; SpO2%, PR are displayed on screen. Simple and convenient operation Light, compact (the weight is 50g including batteries) Low power consumption, two AAA batteries can be continuously Operated for 30 hours Indication of low power consumption Two display modes P/N 13-05666 ..............$89.95
The Aviators Cannula is calibrated for use with the MH-4 flowmeter or any other device calibrated to the standard protocol of 1 liter per minute per 10,000 ft. per FAA-FAR 23.1447. This Cannula works great with a headset! P/N 13-11590 ................$5.95
The Mountain High Oxymizer M type (mustache-style) oxygen-conserving cannula is the most popular version of MH Cannulas. The Oxymizer is standard issue with MH XCR and XCP systems and may work with almost any adjustable constant flow regulator. P/N 13-11592 ..............$24.95
Complete kits that include all you need to do high flight-level cross country flying with ultimate physiological safety. Kit includes the low-profile instrument panel or overhead-mountable EDS 2ip control head unit with a 2.25 X 2.25 form factor, two (2) remotemountable oxygen outlet distributor units, the new IPR (Intelligent Peripheral Regulator) with our light-weight carbon-fiber-wrapped cylinder with a 48 cu. ft. capacity allowing many round-trips without oxygen refills. In addtion, masks, cannulas, as well as necessary hardware and tubing are included. The pilot station comes with our, FAA-CAMI flight-level 250 tested Pulse-Demand ALPS FaceMask that can be upgraded with a noise-cancelling microphone at any time. You can add the Alps face mask with or without microphone for your co-pilot as well. EDS-4ip built-in Pulse Demand oxygen management systems are complete kits includes everything in the EDS-2IP but with the EDS 4ip control head unit with a 2.25 X 3.125 vertical form factor, and four (4) remote-mountable oxygen outlet distributor units NOTE: The EDS ip systems automatically operate from a 12 or 24 Volt system at a mere 250 ma. of current. Therefore, if not specified, during your order the IPR will come with a 12 volt valve and the schematics will instruct that it be powered from the control head, via pin-19. The most preferred configuration. Otherwise the valve for the IPR must be specified for either 12 or 24 volt operation if you decide to power the IPR valve through system power and not from the control head. EDS-2IP ........................... P/N 13-05745 .............$4,785.00 EDS-4IP (Shown) ............. P/N 13-05746 .............$6,175.00
The new OxyArm boom comfort cannula system, which fixes onto your headset, can swivel about and slides in/out for best fit. The nasal tips and the entire feed-tube assembly are easily replaceable. The OxyArm boom cannula has been tested for best use with all MH EDS and XCP products. The OxyArm boom cannula kit from Mountain High has all the items needed to install onto almost any headset in use today. P/N 13-11591 ..............$98.50
FAA-CAMI tested with the EDS-ip system, MH ALPS FaceMask and the MH ALPS-M (for microphone) FaceMask. Outfitted with an electronic Clear-Speak ambient noise-canceling microphone and is compatible with most aircraft systems. Easy to put on and exceptionally comfortable as it does not require a polyvinyl bag. The ALPS or the ALPS-M FaceMask can be used with any of the MH oxygen systems. Available in small, medium and large. Note: Customers using the Mountain High Face Masks with EDS Pulse Systems must purchase feed tube (P/N 13-11388).
Description Facemask Med. FacemaskSmall Facemask Large Part No. 13-04155 13-05136 13-05137 Description Part No. Price $132.95 Facemask w/ Mic Small 13-05134 $126.23 Facemask w/ Mic Med. 13-05135 $144.95 Facemask w/ Mic Large 13-04156 Price $398.00 $379.95 $379.00
Intended for use with current portable oxygen systems. Maximum Oxygen Duration with Minimal Effort. The device uses negative inspiration pressure to trigger pulse oxygen. Completely mechanical, no batteries required. When the user inhales, a supply of oxygen is delivered, simple, safe, and effective, reducing the demand on the users standard portable supplemental oxygen system, and increasing duration times. Includes a convenient strap for wearing around your neck. Outlet Hose with Flow Indicator, Inlet Hose with aerox , CPC, or Skyox Plug-in Fittings. P/N 13-09019 ..........................$364.00
The Oxy2Go Portable Oxygen System Regulator and Cylinder Unit has a lightweight and compact ergodynamic design that fits into the palm of your hand. This is the worlds smallest, most convenient portable oxygen system ever developed for personal use. Oxy2Go ........................... P/N 13-09607 .........$24.95 6 Pk Cylinder refills ......... P/N 13-09608 .........$19.95
MH FDS O2D2 Pulse Demand FADOC Oxygen Delivery System is designed for Cessna pilots. The MH EDS O2D2 is the only single unit. portable, two-place, carry-on Pulse Demand oxygen system currently available. The MH EDS O2D2, with the patented digital electronic Pulse Demand FADOC oxygen delivery system, enables the pilot and passenger/crew to fly at pressure altitudes up to 25,000 feet with safety and comfort. The O2D2 digital pulse demand system reduces oxygen consumption dramatically. Different from standard constant flow systems, the O2D2 pulse demand system wastes no oxygen during the breathing cycle. Studies show that 90% of the oxygen supplied by the O2D2 is transferred to the blood. The average user will enjoy a conservative consumption drop of four times compared to constant flow systems. The system operates, with two people, for up to 50 hours on three AA alkaline batteries. Easy to use, the two-person O2D2 reduces oxygen system workload to almost nil. There are no oxygen flow indicators to watch or manually operated constant flow valves to adjust due to altitude changes. Two push buttons cycle the O2D2 through the various modes that automatically deliver the required supplemental oxygen pulses for various altitudes. The complete standard system includes an aluminum oxygen cylinder (buyer has a choice of sizes with upgrades), a cylinder carry case, primary reducing regulator, low pressure service line, connection fittings, the MH EDS O2D2 FADOC unit, breathing cannulas, face masks, and a tote bag. With Small (4-1/2 DIA) Cyclinder............... P/N 13-05068 .......$1,089.00 With Large (5-1/2 DIA) Cyclinder .............. P/N 13-05069 .......$1,129.00
766
OXYGEN SYSTEMS
The XCP is a low-cost, high-duration multi-place oxygen system. With the A3 and Oxymizer cannula each person will use at most 1.0 liter/min. at 18,000 ft. The flow rate at 18.000 ft. is typically only 3/4 (0.750) liter/minute with the Oxymizer cannula. However, 1.0 liter/minute is used as a worst-case scenario and for calculation convenience. The XCP delivery system consists of: 1 ea. XCP quad-port regulator with self-sealing outlets, 4 ea. XCP face masks (for use with the A4 flowmeter or nasal congestion), 4 ea. Nelson A3 flowmeter/regulators with 3 (three feet) of high quality tubing with CPC connectors and 4 Oxymizer type M nasal cannulas, 1 ea. Oxygen cylinder (AL-415 or AL-682), 1 ea. Tuff-Pack padded fabric carry/strapping case for cylinder and equipment. It has an altitude/flow scale calibrated for the unique Oxymizer oxygen-conserving cannula. The scale is marked in 2,000 ft. increments for VFR flight levels up to 18,000 ft. You can operate the XCP in IFR flight levels with the optional A4 flowmeter/regulator and associated F1 face masks. All systems are shipped empty.
Persons 1 2 3 4 XCP carry-on systems man-hour service time with the Nelson A3 flowmeter and Oxymizer cannula 10,000 ft. MSL 14,000 ft. MSL 18,000 ft. MSL XCP 180 XCP 415 XCP 682 XCP 180 XCP 415 XCP 682 XCP 180 XCP 415 XCP 682 10:00 23:00 37:53 05:27 12:35 22:40 03:51 08:51 14:34 05:00 11:30 18:56 02:43 06:17 10:20 01:55 04:25 07:16 03:00 07:40 12:37 01:49 04:11 06:52 01:16 02:58 04:51 02:30 05:45 09:28 01:22 03:08 05:10 00:57 02:12 03:38
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
(24 cu.ft.) 4-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03657 ......... $795.00 (24 cu.ft.) 2-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03658 ......... $625.00 (24 cu.ft.) 1-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03659 ......... $469.95 (15 cu.ft.) 4-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03660 ......... $750.00 (15 cu.ft.) 2-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03661 ......... $584.00 (15 cu.ft.) 1-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03662 ......... $449.95 ( 6 cu.ft.) 1-pl. carry-on system w/Full-Pack padded cylinder carry/case ..........P/N 13-03653 ......... $439.00
The Co-Pilot is an affordable, handheld oxygen system designed for supplemental breathing at high altitudes. Useful for pilots who only occasionally fly at altitudes requiring oxygen and, therefore, do not need a full-featured oxygen system for their aircraft. The Co-Pilots oxygen regulator has an on/off and volume control knob that is adjustable from off to 2 L/min. The face mask is removable and can be replaced with an Oxymizer cannula for continuous hands-off use for more than 30 minutes of duration per cylinder, at 15,000ft. Builtin pressure gauge will allow you to see how much oxygen is available at all times. Can be shut off and stored with a cylinder installed for more than a year without any noticeable leakage. Comes with regulator & gauge, face mask, two 18-liter non-refillable replacement cylinders, and an instruction manual. . P/N 13-01016 .............................................$199.95 The EDS (Electronic Delivery System) is a supplemental breathing system specifically designed for aviation to employ the tested and well founded pulse-demand method of oxygen delivery. This reduces the amount of oxygen wasted by as much as ten times over constant-flow systems, while providing over 90% blood saturation levels at and well above pressure altitudes of 25,000 ft. The EDS senses and synchronizes itself with your breathing to provide a pulse of oxygen when you benefit from it the most: at the very beginning of your inhalation cycle and not while exhaling, pausing or talking. Measurements show that up to 90% of the oxygen delivered is absorbed directly into the blood stream. A built-in density altitude barometer responds to altitude changes automatically, adjusting the oxygen amount as needed for each breath. Current digital version, EDS-D1, is about the size of a cigarette pack, and it offers 9 modes of operation. All systems shipped empty. TR-95 Transfilling unit w/ variable flow transfer, fitting bleed valve and pressure/contents gauge. P/N 13-03925 ........................................................................... $285.95 TR-75 Transfilling unit w/ O ring fittings and bleed valve ..............................P/N 13-03924 ............................................................................ $159.95 TR-55 Transfilling unit with hand grip knob ......................................................P/N 13-03923 ............................................................................ $107.95
Man-hour service time with cylinder @ 1,800 psig. with EDS unit(s) using cannulas or face mask(s) 10,000 ft. MSL 15,000 ft. MSL 18,000 ft. MSL EDS 011 EDS 022 EDS 040 EDS 011 EDS 022 EDS 040 EDS 011 EDS 022 EDS 040 1 31:06 62:18 113:12 19:05 38:04 69:10 14:24 28:50 52:24 2 15:33 31:09 56:36 09:32 19:02 34:35 07:12 14:25 26:12 3 10:37 20:45 37:44 06:21 12:41 23:03 04:48 09:36 17:28 4 07:45 15:34 28:18 04:46 09:31 17:15 03:36 07:12 13:05 EDS-022-FP: Kevlar fiber-wound cylinder, EDS unit, XCR regulator, cannula, face mask, Full-Pack & tote bag ......... P/N 13-03665.......$1,645.00 EDS-011-FP: Kevlar fiber-wound cylinder, EDS unit, XCR regulator, cannula, face mask, Full-Pack & tote bag ......... P/N 13-03666.......$1,145.00 EDS-480-FP: Glass fiber-wound cylinder, EDS unit, XCR regulator, cannula, face mask, Full-Pack & tote bag .......... P/N 13-03667.......$1,120.00 EDS-180-FP: Aluminum cylinder, EDS unit, XCR regulator, cannula, face mask, Full-Pack & tote bag........................ P/N 13-03668 ........$781.95 EDS-040-2P-TF: Kevlar fiber-wound cyl., 2 EDS units, XCR regulator, cannula, face mask,Tuff-Pack & tote bag ....... P/N 13-03669.......$2,255.00 EDS-022-2P-FP: Kevlar fiber-wound cyl., 2 EDS units, XCR regulator, cannula, face mask, Full-Pack & tote bag ...... P/N 13-03670.......$2,256.00 EDS-415-2P-FP: Aluminum cylinder, 2 EDS units, XCR regulator, cannula, face mask, Full-Pack & tote bag ............. P/N 13-03671.......$1,035.00 EDS-480-2P-FP: Glass fiber-wound cyl., 2 EDS units, XCR regulator, cannula, face mask, Full-Pack & tote bag ...... P/N 13-03672.......$1,748.00 EDS-D1: Unit only, (less regulator) ................................................................................................................................ P/N 13-02389..........$679.90 EDS-D1: Kit with XCR regulator ..................................................................................................................................... P/N 13-02390..........$656.00 EDS-D1: Kit with XCR gauged regulator ........................................................................................................................ P/N 13-02391..........$840.00 EDS-D1: Kit with XCR-DIN regulator ............................................................................................................................. P/N 13-02392..........$989.00 EDS-D1: System with CFF-480 cylinder (1 place) ......................................................................................................... P/N 13-02387.......$1,135.00 EDS-D1: System with CFF-480 cylinder (2 place) ................................................................................................................................................... P/N 13-02388.......$1,630.00 Mountain High Feedtube For Use With 13-04156 On The EDS Pulse Demand System .......................................................................................... P/N 13-11388..............$5.95 Persons
The MH EDS O2D2 Pulse Demand Oxygen Delivery system is the only single unit, portable, two-place oxygen system currently available for aviation. A variety of options allow you, the pilot, to customize a system to your specific needs. The O2D2 kit comes with 3 AA batteries and 2 cannulas and 2 face masks each in their own handy carry bag. Various cylinder configurations of our complete ready-to-fly O2D2 systems are listed below. NOTE: The EDS O2D2 and O2D1 are portable systems designed and calibrated to be used with their regulators (~15 psig. dynamic to 30 MAX. psig. static). However, if you wish to operate from the outlets of a built-in system, they offer the In-Line Regulator pressure reducing and stabilizing regulator. This will allow their portable EDS systems to operate with built-in systems that supply up to 125 psig. to the outlets in the aircraft.
Description MH PORTABLE O2D2 UNIT - If you already have a cylinder and regulator, you can order just the O2D2 unit kit MH O2D2 WITH A-180 AMD XCR REGULATOR - EDS O2D2 with AL-180 Aluminum cylinder and XCR regulator MH PORTABLE 2-PL O2D2 OXYGEN SYSTEM - EDS O2D2 with AL-415 Aluminum cylinder, XCR regulator with Full Pack Part No. 13-07312 $798.00 13-07313 13-05068 Description MH O2D2 A-682 XCR REGULATOR - EDS O2D2, AL-682 Aluminum cylinder, XCR regulator & Full Pack MH O2D2 AL-682 FPR REGULATOR - 2 EDS O2D2, $1,049.00 AL-682 Aluminum cylinder, FPR regulator & Full Pack MH O2D2 KF-011 CYL XCR REGULATOR - EDS O2D2, $1,089.00 KF-011 Kevlar cylinder, XCR regulator & Full Pack MH O2D2 CFFC-022 CYLINDER XCR REGULATOR $1,989.00 - EDS O2D2, CFFC-022 carbon fiber cylinder, XCR regulator & Full Pack MH O2D2 CFF-480 CYLINDER XCR REGULATOR $1,129.00 EDS O2D2, CFF-480 cylinder, XCR regulator & Full Pack MH O2D2 CFF-480 CYLINDER XCR DIN477 - EDS O2D2, $2,029.00 CFF-480 cylinder, XCR DIN-477 regulator & Full Pack Price Part No. Price 13-07317 $1,129.00 13-07319 $2,029.00 13-07321 $1,412.00 13-07323 $1,889.00 13-07324 $1,350.00 13-07326 $1,437.00
MH O2D2 WITH AL-415 AND FPR - 2 EDS O2D2 units with AL-415 13-07315 Aluminum cylinder, FPR regulator & Full Pack MH PORTABLE 2-PL O2D2 OXYGEN SYSTEM - EDS O2D2, AL-647 13-05069 Aluminum cylinder, XCR regulator & Full Pack MH O2D2 UNIT WITH AL-647 FPR - 2 EDS O2D2 units, AL-647 13-07316 Aluminum cylinder, FPR regulator & Full Pack
767
CM WP ME HA
fits all Cessnas with 5/8 lugs on nosegear. Overall length 42.5, collapsed 24. P/N 13-01800 .......$44.75
BEECHCRAFT AXLE - This two piece tow bar MOONEY - A simple T handle design for the
Mooney axle. Overall length 33.5. P/N 13-02000 .......$46.75 is designed for use in Beechcraft axles. Overall length 48, collapsed 27. P/N 13-02215 .......$55.95
CHEETAH/TIGER - This tow bar is designed to fit Grumman aircraft. Its collapsible design makes it easy to fit in the baggage area. Overall length 43, collapsed 26. P/N 13-02200 .......$59.50 ERCOUPE -Specially designed for Ercoupes. This tow bar has a spring loaded lever action for ease of operation. Overall length 46.5, collapsed 28.5. P/N 13-01580 .......$54.95 1-1/8 AXLE - This is a universal tow bar designed for aircraft with 1-1/8 axles such as Cessna Skymaster and Piper Seneca. Overall length 56, colapsed 33. P/N 13-02110 .......$59.25 COMMANDER - This model fits Rockwell 112 and
114. Spring loaded forks for ease of operation. Overall length 46.5, collapsed 28.5. P/N 13-01570 .......$59.50
BEECHCRAFT - The compact design of this tow bar makes it very popular among Beech owners. Overall P/N 13-01900 .......$46.75
AP LG EP
UNIVERSAL - For the FBO this is an ideal hand TWIN PIPER - (HH-007) Piper Twin Comanche,
Apache, Aztec, and Navajo Towbar. Two section until 28 collapsible, 49-1/2 overall length. P/N 13-01778 .......$47.50 held universal tow bar. Fits Cessna, Beech, Piper, Scott Tailwheel and many others. Overall length 57, collapsed 34. P/N 13-02250 .......$92.50
CS IN EL AV TO PS BV
VIKING - Designed especially for Bellanca Viking axle. Collapsible design and spring loaded fork. Overall length 46.5, collapsed 28.5. P/N 13-02220 .......$68.50 DELUXE BEECHCRAFT - Spring loaded forks for ease of operation. Overall length 47, collapsed 28. P/N 13-01905 .......$55.95
DUTCHESS/PIPER - Fits Dutchess and Piper nose gear axle. Telescoping design provides extra nose gear clearance. Overall length 48, collapsed 28. P/N 13-02210 .......$44.75 DELUXE PIPER - The deluxe Piper towbar
offers all the features of a standard Piper towbar plus the convenience of a two-piece design. When extended, this model provides additional propeller clearance and leverage. Length: 42 extended, 23 collapsed. Wt. 3.5 lbs. P/N 13-01550 .......$52.50
This heavy duty universal tow bar is standard equipment for FBOs. Fits most Piper, Cessna, Beech,Mooney, AeroCommander, and many others. The adjustable fork allows you to extend the fork assembly from 3 to 10. This tow bar is extra long at 7 ft. 6 inches. The T-100 is not made for specific aircraft. It has spring loaded adapters that will fit and 1/4 to 5/8 towpins on the aircraft axle. This will not work with aircraft that have tow pins on the landing gear. P/N 13-02355 ............ $243.95
ring and press button. Easily moves aircraft up to 3,000 lbs. rolling weight. Includes wall mount. If a floor mount is desired order P/N 13-06124. Order bracket separately. Comes with 100 of cable and 75 of control cord and has an automatic safety shut off. Cable speed is 30 feet per minute. Voltage 110 DC........P/N 13-01764 .............$462.95
HEAVY DUTY AIRCRAFT WINCH - Winch includes metal wind up drum, 100 of cable 125 of control cord. Moves aircraft up to 6,000lbs. Includes a wall mount. If floor mount is desired P/N 13-06124 must be ordered. Code 7 P/N 13-06125 .............$428.95 AIRCRAFT WINCH MOUNTING KIT - Aircraft Winch
Mounting Kit Everything you need to secure the winch to the floor. Mounting kit only. Can be used with P/Ns 13-01764 and 13-06125 in a floor mount is desired. P/N 13-06124 ...............$51.75
768
TOW BARS
Light enough to stow Built from a combination of steel for maximum durability comfort grips on the handle and spreader bar chip resistant red bar will look great for years. Operation: extend the handle easily with high shear wick release pin apply forward pressure on the spreader bar to open the wishbone jays. Line up the Bogi-Bar attachment at the tow points or axle depending on model. Release the tension on the spreader bar and you are locked on! The tow bar will not slip off the plane. Reverse for removal. Model 4-API 4-ABI 04M-XP 4-TDG 4-F24 4-RV Model 4-35 4-19/23B 4-17/30 4-172 4-206 4-210 4-182-XL 4-SR 4-AA 4-Lake 4-Moon 4-24/30 4-22/28 4-28R 4-34 4-PA46 4-28R, 4-PA46 4-RVA 4-LANCE 4-20 4-DA40 4-DA42 4-RV10 4-Socata Agusta TAIL WHEEL AIRCRAFT Extended Fits P/N Length Aircraft Products Tailwheel 48 12-02097 Alaskan Bushwheel 3400B 48" 13-06106 Cessna XP Modification 48" 13-06107 Scott 3200 & 3400/ABI 48" 13-10000 3200/3400 Fairchild 24, Beech Stagger 48" 13-02410 Wing Vans RV3, RV4, RV6 & RV8 48" 13-02408 NOSE WHEEL AIRCRAFT Extended Fits P/N Length Beechcraft- Bonanza, Debo49" 13-10030 nair, Duchess, Duke & Skipper Beechcraft-Musketeer, Sport, 48" 13-01808 Super, Sierra & King Air Bellanca-Viking Series 48" 13-01809 Cessna 150, 152, 172, 175, 48" 13-10040 177, 182, 310R, RV-4 Cessna 205, 206 & 207 48" 13-10060 Cessna 172RG, 48" 13-10050 177RG,182RG & 210 Series Cessna 182 S (1996 and up) and T (2001 and up) models 55 13-11389 with long nose. Cirrus SR 20 &22 48" 13-06108 Gulfstream American AA1 48" 13-02407 & AA5 Lake Amphibian 48" 13-02411 Mooney Aircraft 48" 13-01810 Piper Comanche PA-24, PA-30 & PA-39 Also the 48" 13-10010 Cherokee Six axle w/pants if tabs above wheel are broken Piper PA-22, & PA-28 Series 48" 13-10020 (Not PA-28R) Piper PA-28R Series - Hand 49 13-02098 Pull for dog-leg style Piper Seneca PA34 200/220/220T, and Aerostar 78" 13-01812 601P *handle extends to 78 Piper Malibu & Mirage 72" 13-06112 Vehicle Pull Piper PA-28R, PA- 32R, PA-46 Hand Pull Towbar. 13-11203 60 Malibu, Mirage, Meridiam and Saratoga Aircraft. Vans - RV6A, RV7A, RV8A, 13-01811 48" & RV9A Lance Towbar 48 12-02099 Diamond DA20 -13-06111 Diamond DA40 -13-06110 Diamond DA42 -13-06109 Vans - RV10 48" 13-04282 Socata Style Bogi Bar 49" 13-06113 Agusta Helicopter.Handle 70" 13-01813 extends to 70 Price $98.75 $96.50 $92.50 $92.50 $99.50 $92.50 Price $92.50 $92.50 $99.50 $92.50 $94.50 $113.95 $104.75 $93.50 $92.50 $117.95 $94.50 $92.50 $92.50 $24.95 $159.95 $186.95 $184.95 $92.50 $178.00 $92.50 $92.50 $186.95 $92.50 $101.95 $139.95 Lightweight aluminum designed for Waco, Stearman, & Cessna 195 type aircraft. Length: 100, Spread: 90, Wt: 22 lbs. Hook dia: TR-71 (.850), TR-72 (1.25) TR-71B Towbar w/Ball hitch........................P/N 13-01907 ........ $558.00 TR-72B Towbar w/Ball hitch........................P/N 13-01908 ........ $558.00 TR-73B Towbar w/Ball hitch........................P/N 13-01909 ........ $558.00 TR-71R Towbar w/Ring hitch ......................P/N 13-01910 ........ $558.00 TR-72R Towbar w/Ring hitch ......................P/N 13-01911 ........ $558.00 TR-73R Towbar w/Ring hitch ......................P/N 13-01912 ........ $558.00 The TR-34 has the light weight of the TR-3, and the strength of the TR-4. It has the same universal features that fit most aircraft from C-150 through aircraft up to 14,500 lbs. Wt: 35lbs. Available in 3 hitch styles. Ring Hitch (TR-34R) P/N 13-10085 ........ $559.00 Ball Hitch (TR-34B) ...........P/N 13-01886 ........ $497.00 Clevis Hitch (TR-34C) .......P/N 13-01887 ........ $498.00 TWA-10 Scott Tail Wheel Adapter (2 pcs. req) P/N 13-10089 .......... $20.85
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
The TH-5 is a scaled down version of the TR-3 tractor towbar. Excellent for operators and tee hangar owners who need a towbar which is lightweight (14 lbs), has good large pulling handles, and is sturdy enough for towing Cessna 150s to 310s. Size: 74L. Wt: 14 lbs. Ring Hitch ...........P/N 13-10110 ........ $338.95 Ball Hitch ............P/N 13-10111 ........ $364.95 Clevis Hitch ........P/N 13-01884 ........ $334.00
MODEL TR-6
Excellent for towing aircraft such as the T-6, P-51, Stearman, Staggerwing Beech, or any aircraft with 3/4 or larger eye bolts. Length: 12 Spread: 12 ft. Weight: 62 lbs. Ring Hitch ..........................P/N 13-10131 ........$965.00 Ball Hitch ...........................P/N 13-10130 ........$745.95
MODEL TR-34
Includes new grips and is 7 longer than the standard Bogi Bar T-Handle. The extra length can be quite beneficial for aircraft with extra-long noses like the Cessna 182 S (1996 and up) and T (2001 and up) models. Tall customers will find this T-Handle easier on the back since it lowers that overall angle of the tow. The Extended T-Handle works with any of the standard Bogi-Bars and will increase the overall length to about 55. Model 4-TXL. P/N 13-11199.................$34.95
769
TOW BARS
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
This powerful 24-volt electric aircraft tug will fit and move any nose wheel airplane up to 6,000 lbs. without wheel fairings as well as those with wheel fairings that have 3 or greater of clearance from the fairing to the ground. It utilizes a smooth twist-grip speed control for precise forward and reverse movements. The Deluxe model (D) is shipped with batteries and a charger so the unit is ready to use immediately. Uses 2 garden tractor batteries hooked up in series. NDE-24D Deluxe Up to 6000 lbs. P/N 13-07278........ $1,995.00 This manual tow bar has heavy-duty solid rubber 8-inch wide tread wheels and will move most tail-draggers up to 2,000 lbs. and tail wheel tires up to 10 inches in diameter. Options Available: 3rd Wheel for heavier ships, and RV tail wheel lift pin. Tail-Dragger Dragger Features: Patented Design No Winches No Hydraulics No Metal To Metal Contact No Adapters Required Superior Traction 5 Second Loading & Unloading Will fit Almost Any Aircraft Tail Wheel Stays In Trailing Position Lifting Pins Grip & Lift Tail Wheel Maneuver In Any Direction Operator Has Good View Of Wingtips Part No. 13-01510 13-03736 13-01824 Part No. 13-04936 Price $219.00 $1,695.00 $1,595.00 Prices $7.85
Description Standard tail Dragger 24V Electric Tail Dragger Dragger Tail Dragger Dragger Gas
The Nose-Dragger Dragger features a swing gate front roller (for easy loading), 10 ball bearing rollers (which push and guide the nose wheel), and does not require the use of adapters, winches, or hydraulics. Effortless ground handling is accomplished by its lightweight design and slow walking speed. The Nose-Dragger Dragger accepts nose wheels up to 600 x 6 (with or without wheel fairings), and no metal-to-metal or metal-to-fiberglass contact. Available in gas or electric power models. The 12V electric powered NoseDragger Dragger will accept aircraft up to 3,000 lbs. The Nose-Dragger Dragger Gas powered model accepts aircraft up to 6,000 lbs. Please call 1-877-477-7823 for freight quote. Gas Powered, 6.5HP (up to 12,000 lbs) ........ P/N 13-05103 ... $1,595.00 Elevtric Powered, 24V (up to 6,000 lbs) ........ P/N 13-04304 .... $1,695.00 Electric Powered, 24V (up to 6,000 lbs)........ P/N 13-03205 ... $1,695.00
ACCESSORIES
Snow Chains ................................................ P/N Battery Charger - 12V .................................. P/N Battery Charger - 24V .................................. P/N Mag-Light / Head Lamp................................ P/N 13-04932 ......... $59.95 13-04933 ......... $49.95 13-04934 ....... $105.95 13-04935 ......... $58.75
ACCESSORIES
Descriptions RV Tail Wheel Lift Pin
The deluxe model comes with charger and batteries included so the unit is ready to be used immediately. This powerful 24-volt electric tug has heavy-duty 11 1/2 -inch air wheels and will move most taildraggers up to 6,000 lbs., tail wheel tires up to 16 inches in diameter. It utilizes a smooth twist-grip speed control for precise forward and reverse movements. Uses 2 garden tractor batteries hooked up in series. P/N 13-07281 ....................$1,995.00
Features: No Flammable gasoline needed in hangar Easy To Use Infinite Speed Control Versatile Applications Push button forward and reverse controls Nose gear quick attach for easy nose gear hook up. The adjustable fork height fits virtually any light aircraft Trickle charger for battery Large 16 x 6.50 - 8 turf tire For aircraft weight of 3500 to 4500lbs. P/N 13-04513 ...................... $1,291.00
Pocket tow makes tail wheel aircraft maneuvering easy. Made with one-inch heavy-duty nylon webbing, the lightweight tow bar alternative is small enough to fit in your pocket and works on tail wheel aircraft with a 360-degree full-swivel tail wheel assemblies. The small end loops around the tail wheel leaf spring and cinches up tightly to pull and steer the aircraft backwards without pushing or pulling on any flight surfaces. Tailwheel leash - Black ........................ P/N 13-04681 ..................$19.95 Tailwheel leash - Red........................... P/N 13-04682 ..................$19.95
User benefits: All tow bars and heads are interchangeable with other popular tow bar systems such as tronair warranty on all materials and workmanship money saving alternative to multiple tow bars
This towbar easily captures your tailwheel. Just push down on the bar and latch the pental hook or drawbar ball. It makes moving the Stearman from the rear quick and easy. Made with heavy duty wheels and pump up tires. Powder coated black. P/N 13-11618........... $358.00
STEARMAN TOWBAR
Brackett aircrafts multi-link tow bar line consists of tow bars that utilize changeable heads which allow you to tow a large variety of turbo prop and jet aircraft. The tyga line offers a standard multi-link system for aircraft with maximum tow weights of up to 125,000 pounds. All heads and tow bars are interchangeable with many widely used multi-head tow bar systems. You now have a high quality and competitive source for tow bars, changeable heads, and accessories. Description TY-TB125 Multi-Link Towbar TY-TB75 Multi-Link Towbar TY-TB-FTD Flat Tire Dolly T/B Part No. 13-04157 13-04158 13-04159 Price $1,395.00 $1,175.00 $2,995.00
770
TOW BARS
Aircraft Spruce is pleased to offer the new all weather Robotow 24SL. It is lightweight (33 lbs.) and portable, making it ideal for carrying onboard your aircraft. When the Robotows heavy duty all weather knurled drive drum is held against the nose wheel, the aircraft is easily moved. A trigger on the handle controls the speed while a switch reverses direction on command. Powerful, portable, and dependable, Robotow is an ideal motorized towbar for the aircraft listed below. Kits include Robotow, Battery, and Charger (US Charger or International Charger). Order axle adapters separately.
Description Robotow 6420 24V Towbar Cordless Kit with International Charger Robotow 6426 24V Towbar Cordless Kit with U.S. Charger Robotow 6424 24SL Robotow only Robotow 6351 corded 120V, with 80ft. extension cord. Parts # Price 13-03896 $1,136.00 13-04222 $1,136.00 13-11263 $895.00 13-03897 $997.00 13-11264 13-11265 13-03901 13-03902 $275.00 $135.00 $54.95 $71.95
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
ACCESSORIES
Robotow 6425 24SL 5 amp Battery Robotow 6427 24SL 3 amp Charger Robotow 18 foot Extension Cord. Robotow GFI
The QUICK-FOLD COMPACT TOWBAR also known as the QFC--TowbarTM This new to the market design was patented with you in mindNo more back breaking, bend over towing Simply attach the QFC-TowbarTM extension to your already existent Cessna tow bar and stand up straight -away from under the propeller-for an added extension of 33. The QFC-TowbarTM has a unique compact design allowing for secure storage. It simply folds flat and is stowed securely along side the factory tow bar in the luggage compartment. P/N 13-06722 .................$99.00
The new Deluxe Tail wheel Towbar uses a positive locking control cable to attach to the wheel from a straight-on position. No extra maneuvering or lifting is required, and it can be adjusted for various tail wheel sizes. Towbar Weight: 26 lbs. Note: Maximum weight to lift is 1,200 to 1,500 lbs. P/N 13-04918 ...................$249.95
Designed by an aircraft mechanic for easy ground handling of his Aeronca, this new tow bar is ideal for all types of tailwheel equipped aircraft. Just place the tail wheel in holding bracket, lift up, and tow bar wheels allow aircraft to be wheeled anywhere with ease. Bracket fits all standard aircraft tailwheels. P/N 13-04277 ........................ $271.95
GLIDER & BANNER TOW HOOKS GLIDER & BANNER TOW HOOK RELEASE GLIDER & BANNER TOW RING
Bolt-on tow hook with bumper is designed to be directly bolted to a custom mounting bracket. The bumper is designed to reduce the kick-back that occurs when releasing a banner. The polyethylene bumper absorbs the force of the release and your tow hook release will last longer. P/N 13-06281 ....................$527.00
Bolt-on tow hook is designed to be directly bolted to a custom mounting bracket. This hook is similar in design to the Schweizer manufactured hook that is no longer available. Design improvements were made to increase emergency release capability at all towing loads and angles. The tow hook is not to be used on gliders. FAA approval can be obtained for the complete tow hook and release system by following the guidelines in FAA Advisory Circular 43.13-2B, Chapter 8, titled, Glider and Banner Tow-Hitch Installations and the included tow hook installation instructions. Tow hook release in not STC or PMA approved. P/N 13-04975 ....................$458.00 Weld-on tow hook designed to be directly welded to a custom mounting bracket. This hook is similar in design to the Schweizer manufactured hook that is no longer available. Design improvements were made to increase emergency release capability at all towing loads and angles. The tow hook is not to be used on gliders. FAA approval can be obtained for the complete tow hook and release system by following the guidelines in FAA Advisory Circular 43.13-2B, Chapter 8, titled, Glider and Banner Tow-Hitch Installations and the included tow hook installation instructions. Tow hook release in not STC or PMA approved. P/N 13-04974 ....................$420.95
The tow rings is designed for use with the glider and tow hook release. The size of the tow ring is 2 OD. The material is forged steel, finished with cadmium plate with a proof load to 2500 lbs. Tow ring is for use with Wings Unlimited, Inc. tow hooks only. It is not STC or PMA approved. P/N 13-06282 ......................$19.85
The release handle is attached to the support bracket in the cockpit of the airplane. A cable is attached to the handle and tow hook release. FAA approval can be obtained for the complete tow hook and release system by following the guidelines in FAA Advisory Circular 43.13-2B, Chapter 8, titled, Glider and Banner Tow-Hitch Installations. The release handle is not STC or PMA approved. PN 13-06283 .....................$168.95
The support bracket is attached to the floor of the airplane in the cockpit and is the housing that holds the release handle. FAA approval can be obtained for the complete tow hook and release system by following the guidelines in FAA Advisory Circular 43.13-2B, Chapter 8, titled, Glider and Banner Tow-Hitch Installations. The support bracket is not STC or PMA approved. PN 13-06284 .....................$113.95
771
HA AP LG EP CS IN EL AV TO PS BV
Sidewinder collapsed.
2-piece design for hand or powered use for heavier airplanes. Extends to 61.5 and collapses to 33 and weighs 5 pounds. For attachment to a golf cart, tractor or other powered vehicle, please use the ST-1 Vehicle Adaptor. Made in the USA using 4130 Chromoly material. Application Part No. Price BE-4 Beechcraft - Fits Bonanza, 13-06849 $389.00 Baron, Travel Air, T-34, Duchess BE-4 Cessna - Fits 172RG, 13-06850 $394.95 177RG, 182RG, 210, P210 BE-4 Piper - Arrow, Lance, Saratoga (RG), Malibu, Matrix, Meridian, 13-06851 $389.00 Seminole. BE-4 Eclipse - Fits All 13-06852 $389.95 ST-1 Vehicle Adapter 13-04066 $59.50 If you own models 33, 35 or 55, the ST-1 is the least expensive, most versatile option for hand or vehicle towing. With an overall length of 38.5 and 3 pound 8 ounce weight, it fits neatly on the floor of your baggage compartment. This is our recommended tow bar for the STIFFY. For attachment to a golf cart, tractor or other powered vehicle, please use the ST-1 Vehicle Adaptor. Length is 38.5 and weighs 3 pounds 8 ounces. Made in the USA using 4130 Chromoly material. FITS THESE BEECHCRAFT MODELS: Bonanza, Baron, Travel Air, T-34 P/N 13-06848 ......... $209.00 ST-1 Vehicle Adapter ...............P/N 13-04066 ........... $59.50
A 1-pound, spring-loaded, reversable-ratcheting mechanism that greatly increases the leverage available to help move your plane. Must be used with either the ST-1 or BE-3 Towbar, purchased separately. Made in the USA using 4130 Chromoly material.
REDLINE STIFFY
Price $225.00
Provides a solid link between your airplane and other brands of tow bars or power tugs that were designed to connect to either your axle or tow pins. With the WLL, nothing touches any exterior surface of your plane -- the result is no scratching or other damage! Made in the USA using 4130 Chromoly material. FITS THESE BEECHCRAFT MODELS: Bonanza, Baron, Travel Air, T-34 P/N 13-01913 ......... $249.95 The Slider adapter inserts into the front axle and tightens securily. It provides a short stub on each side for any universal type tow bar attachment. With the Slider in place, nothing touches any exterior surface of the nose gear, avoiding scratching and other damage. Made in the USA using 4130 Chromoly material. FITS ALL ECLIPSE AIRCRAFT. P/N 13-06854 ......... $149.00
Main gear axle adapter allow the use of floor jack or bottle jack for tire maintenance. Made in the USA using 4130 Chromoly material. FITS ALL ECLIPSE AIRCRAFT. P/N 13-06853 ......... $349.00
772
CM WP ME HA AP LG EP CS IN EL AV TO PS BV
Descriptions
Part No.
Heavy Duty - Incorporates Gear Reduction and 13-05734 is 36V (No APU) up to 30,000 Lbs. Heavy Duty - Incorporates Gear Reduction and 13-05735 is 36V (With APU) up to 30,000 Lbs. Heavy Duty, Dual Wheel Carriage Incorporates Gear Reduction and is 36V (No 13-06901 APU) up to 30,000 Lbs. Heavy Duty, Dual Wheel Carriage Incorporates Gear Reduction and is 36V (With 13-06902 APU) up to 30,000 Lbs.
Dual Wheel Carriage (No APU)Up to 15,000 13-06896 lbs. Dual Wheel Carriage (With APU)Up to 15,000 13-06897 lbs. Wheel Pant Unit (No APU) Compatible with 13-06898 many helicopters as well. Up to 15,000 lbs. Wheel Pant Unit (With APU) Compatible with 13-06899 many helicopters as well. Up to 15,000 lbs.
$10,865.00
Vthrust aircraft mover from Littlestar Products makes quick and easy work of moving your singleengine airplane, using an off-the-shelf 18V or 24V drill/screwdriver* as its power source. The drills sealed mechanism means that there are no belts or chains to snag, and no adjustments to make. Most applicable drill/drivers have two or even three speed ranges for precise control of the Vthrust, and supply sufficient torque to move a 3000 lb. airplane up a 3% grade. The drill/driver chucks onto the vThrust, and attaches with a simple clamp. Just attach the driver and go! Description M-770-N - Standard Tugger, Non-Steerable M-778-S - Deluxe Tugger, Steerable Accessories Hangar Ramps (Set of 3) Beechcraft Adapter Diamond DA-40 Adapter (Set of 2) Piper Adapter (Set of 2, for fixed gear with wheel pants) Diamond DA-42 Adapter (Set of 2) 18V Dewalt 1/2 Drill Driver (2 18V Batteries included) Part No. 13-06097 13-06098 Part No. 13-06091 13-06092 13-06093 13-06094 13-06095 13-06096 Price $1,447.00 $1,757.00 Price $99.00 $29.95 $59.95 $29.95 $59.95 $339.00
Allows the pilot to easily and instantly reach the manual flap Johnson Bar lever without leaning forward or bending down in the cockpit. Puts the flap control at the correct distance from the pilot! Pilots can now remain upright and alert while using the flaps, keeping their focus on landing or takeoff, terrain, traf