Documente Academic
Documente Profesional
Documente Cultură
Issue Date
V0.5 2011-03-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
MRFUd Description
Contents
Contents
1 Introduction..................................................................................1 2 Technical Specifications.................................................................3
2.1 Frequency Band........................................................................................................................................................3 2.2 Capacity....................................................................................................................................................................3 2.3 Receiver Sensitivity..................................................................................................................................................4 2.4 Output Power............................................................................................................................................................4 2.5 Power Consumption.................................................................................................................................................7
ii
MRFUd Description
2 Technical Specifications
1
a.1shows the MRFUd. Figure a.1 MRFUd
Introduction
The MRFUd can be used in an enhanced indoor cabinet or an enhanced protective outdoor cabinet. The MRFUd performs modulation, demodulation, data processing, and combination and division of baseband signals and RF signals. With the Software Defined Radio (SDR) technology, the MRFUd can work either in GU or GL dual-mode through software configuration modification. MRFUd has a dual-transmitter and dual-receiver structure, which supports higher output power and carrier capacity.
To meet the requirements for radio network deployment, the BBU3900 and MRFUd are connected through a CPRI interface that uses an electrical or optical cable to transmit CPRI signals. The BBU3900 and the MRFUd are connected in dual-star topology. That is, the CPRI port on the GTMU is connected to CPRI0 on the MRFUd, and the CPRI port on the WBBP or LBBP
Issue V0.5 (2011-03-30) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 1
MRFUd Description
2 Technical Specifications
is connected to CPRI1 on the MRFUd, as shown in a.2. Figure a.2 Dual-star topology
MRFUd Description
2 Technical Specifications
2
Frequency Band 900MHz 1800MHz
Technical Specifications
2.2 Capacity
Figure a.2 Capacity Mode GSM UMTS GSM+UMTS LTE
Capacity Each MRFUd supports 8 TRXs. Each MRFUd supports 6 TRXs, and supports 4 carriers in MIMO configuration G1U1G2U1G1U2G2U2 MRFUd 11.435101520MHz per PA 21.435101520MHz per PA
GSM+LTE
MRFUd Description
2 Technical Specifications
As recommended in 3GPP TS25.104, the receiver sensitivity (full band) is measured at the antenna connector on condition that the channel rate reaches 12.2 kbit/s and the Bit Error Rate (BER) does not exceed 0.001. Frequency band (MHz): 880 to 915, 925 to 960, 1800
GSM
Frequency band (MHz): 880 to 915, 925 to 960 Frequency band (MHz): 1800
LTE
105.8 dBm
m to 4500m; and is 2 dB lesser than the standard power when the MRFUd is located at a height of 4500 m to 6000m.
Factors such as the site-to-site distance, frequency-reuse factor, power control algorithm, and traffic
model affect the gain achieved by dynamic power allocation. Therefore, in most cases, the network planning can be based on the power specification achieved by dynamic power allocation.
Power sharing cannot be used together with RAN sharing with BSS and RAN, concentric cell, Co-BCCH,
and IBCA.
In power sharing mode, the power control and DTX must be set to ON. Power sharing assumes a random distribution of UEs in the cell. Ther symbol * indicates that the default configuration is 40W, if 60W or 80W is required, you must
2.4 lists the typical configurations of the MRFUd at 900 MHz or 1800 MHz in compliance with the specifications for multi-carrier base station in EN 301 502 V9.2.1. Figure a.4 Typical configurations of the MRFUd (900 MHz or 1800 MHz) Numb er of GSM Carrier s 1 Numbe r of UMTS Carrier s 0 Numb er of LTE Carrier s 0 Output Power per GSM Carrier (W) Output Sharing Power per GSM Carrier (W) 40(default)* 60(license) 80(license) Output Power per UMTS Carrier (W) Output Power per LTE Carrier (W) -
MRFUd Description
2 Technical Specifications
Output Sharing Power per GSM Carrier (W) 40(default)* 60(license) 80(license) 40 40 30 30 27 27 -
3 4 5 6 7 8 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 2
40 40 27 27 20 20 -
1 2 1 2 1
1 1 2 2 0
0 0 0 0 1
80 40 80 40 40
80 80 40 40 -
240
MRFUd Description
2 Technical Specifications
Output Power per LTE Carrier (W) 240 220 220 220 220
40 30 30 20 15
MRFUd Description
2 Technical Specifications
power control and DTX are enabled. The maximum power consumption for GSM is reached when the base station works with 100% load.
The typical power consumption for UMTS is reached when the base station works with 40% load. The
maximum power consumption for UMTS is reached when the base station works with 100% load.
The typical power consumption for LTE is reached when the base station works with 50% load. The
maximum power consumption for LTE is reached when the base station works with 100% load.
The power consumption listed in 2.5 is based on the condition that the enhanced cabinet is used.
MRFUd Description
2 Technical Specifications
Specification Mode900MH z/1800MHz Configuration Output Power per Carrier (W) Typical Power Consumption (W) 750 855 1155 955 985 1210 1410 1560 1530 720 795 1110 Typical Power Consumption (W) 795 900 1200 1000 1030 1255 1455 Maximum Power Consumption (W) 885 1170 1710 1135 1270 1585 1765 1945 2065 795 960 1395 Maximum Power Consumption (W) 930 1215 1755 1180 1315 1630 1810
GSM
32 34 36
20 20 20 20/20 20/20 20/20 20/40 20/40 20/40 20 20 40 Output Power per Carrier (W)
GSM+UMTS
GSM+LTE
UMTS
31 32
31 Configuration
32 34 36
GSM+UMTS
GSM+LTE
GSM 3 2 + LTE3 1
MRFUd Description
2 Technical Specifications
Item
Specification GSM 3 3 + LTE3 1 GSM 3 4 + LTE3 1 UMTS 31 32 LTE 31 Configuration 20/40 20/40 20 20 40 Output Power per Carrier (W) 1605 1575 765 840 1155 Typical Power Consumption (W) 760 865 1165 965 995 1220 1420 1570 1540 730 805 1120 1990 2110 840 1005 1440 Maximum Power Consumption (W) 895 1180 1720 1145 1280 1595 1775 1955 2075 805 970 1405
BTS3900 A (48V)
Mode900MH z/1800MHz
GSM
32 34 36
GSM+UMTS
GSM+LTE
UMTS
31 32
LTE
31
MRFUd Description
2 Technical Specifications
3
Abbreviation 3GPP AMR BBU BER CPRI DTX ETSI GTMU LBBP LTE MIMO MRFUd RAN RF RNC RX SDR UMTS WBBP
Full Name 3rd Generation Partnership Project Adaptive Multi Rate Baseband Unit Bit Error Ratio Common Public Radio Interface Discontinuous Transmission European Telecommunications Standards Institute GSM Timing and Main control Unit LTE BaseBand Processing unit Long Term Evolution Multi-input and Multi-output Multi-Mode Radio Frequency Unit Radio Access Network Radio Frequency Radio Network Controller Receive Software Defined Radio Universal Mobile Telecommunications System WCDMA Baseband Processing unit
10