Documente Academic
Documente Profesional
Documente Cultură
2.Parts List:
– Diodes = 1N34
– C1 & C2 = .2 micro-farad
– C3 & C4 = electrolytic 100 micro-farad
This Tesla Generator is just a modified
version of a Voltage Quadrupler
1.This is a circuit from Wikipedia. This circuit is a
public domain circuit. It follows the law of
conservation of energy.
Basics of a Voltage Quadrupler
1.This circuit still follows the law of conversion of energy. As the voltage
goes up the current goes down to allow for the power to stay the same.
2.It doesn't matter it the transformer is a step up or a step down transformer.
3.The input is AC and the output is DC.
4.The Output VDC is 4 * peak of the AC voltage induced on the secondary
via the primary voltage.
5.Peak voltage is the voltage times square root of 2.
6.For example,
– Input Voltage = 110 VAC
– Secondary Voltage = 24 VAC
– Output Voltage = 4 * (Secondary Voltage * 1.414)
The Tesla Generator is a
Electromagnetic Signal Voltage
Multiplier
1.With this in mind, this also follows the law of conservation of energy.
2.This circuit multiplies the received electromagnetic voltage regardless of any
communication value of the electromagnetic wave. You are just concerned with
the power value and not communicating.
3.This voltage can be anywhere from 0.01 VDC to 2.00 VDC, depending on the
antenna that you are using. You can even theoretically attach the antenna to
some sort of RF receiver/amplifier and then attach that to the antenna connection
of this circuit. The power will be still too small to power electronic devices.
4.There is a device that you can use to power one super bright LED, hence making
an RF flashlight. That device is called a low power oscillator. It is a public
domain circuit. But most super bright LED's won't power up until the source
voltage is greater than 1.20 VDC.
5.The URL's are
– http://www.youtube.com/watch?v=KnJFonvzr1E
– http://www.teslagenerator.com/
Low Power Oscillators
1.Low Power Oscillators start operating at low power
ranges.
2.The most popular are the circuits called Joule Thief
circuits. They are called “free energy” devices.
3.All low power oscillators also follow the law of
conservation of energy.
List of a few Low Power Oscillators
1.Honeywell has one of these for use for their burner controls. They patented
it. The U.S. patent number for this is 4,734,658. It is called “Low Voltage
Driven Oscillator Circuit” . This uses a JFET. JFET's can be start at voltages
lower then 0.3VDC.
2.There is another one that that uses a JFET with an audio transformer that is
obsolete on a website titled “Oscillator with super low supply voltage”. The
supply voltages are 0.04 to 0.1 VDC. The audio transformer that was used is
huge and is an obsolete product. He had a 100:1 gain.
3.The URL is http://www.dicks-website.eu/fetosc/enindex.htm
4.There is low power oscillator that uses a bi-polar junction transistor. It starts
to work at a level of at least 0.3 VDC. This one is called a Joule Thief.
Low Power Oscillator Circuit from their
patent that belongs to Honeywell Inc.
1.United States Patent Number 4,734,658
Oscillator with super low supply voltage
1.This oscillator uses a JFET B310 and a transformer (model
952.431 made by Adastra). It starts oscillating at .05mVDC
and produces 5.0VDC. The transformer is huge.
2.The URL link to this site is
http://www.dicks-website.eu/fetosc/enindex.htm
3.The LED's Anode would be connected to the JFET's Gate.
The LED's Cathode would be connected to the
circuits Ground.
4.You may be able to use a 100:1 transformer
from Coilcraft. The URL is
http://www.coilcraft.com. The part number is
LPR6235-752SML (1:100 Ratio)
The Joule Thief Circuit
1.The URL's are
– http://blog.makezine.com/2007/11/02/make-a-joule-thi
ef-weeken/
– http://cdn.makezine.com/make/wp_joule_thief.pdf
– http://www.emanator.demon.co.uk/bigclive/joule.htm
2.This circuit works from 0.3VDC. To light a super
bright LED.
To Make A Decent Power Source
1.Connect the Tesla Generator to a low power oscillator that is
hooked up to a super bright LED.
2.Now you have an electromagnetic wave powered LED
flashlight.
3.Next questions:
– How many super bright LED's does it take to power one
of those photo-voltaic panels (sold at Best Buy) that are
designed to power a laptop?
● These panels produce 12 to 24 VDC.
like televisions.
● This is also the kind that is used in grid-tie for solar photo-voltaic power
16. If the plant is pot bound, then unplug it and put it a new
pot.
17. All you need to do is to make sure that your plants have
enough food and water. Your greenhouse should also also be
kept at the the right temperature for you plants.
To Make Easier Plant Batteries
18. At the following URL (www.voltreepower.com
), they have a device that can connect to a plant.
Conclusion
1. Every circuit on here follows the law of
conservation of energy.
2. These circuits are not free energy in that they
DO NOT CREATE energy from NOTHING. They
use the low power energy that is around us.
3. The only free about these circuits is that the end
user isn't paying for the energy used. The only
payment is the initial cost of the materials to build
these circuits and the cost of R&D of these circuits.
Conclusion
4. These ideas here efficiently uses the low power
energy that is around us.
5. Every circuit here (with the exception of
Honeywell's) is public domain circuits, the only
money making that can be done is for someone to
build the units and sell them.
Challenge To The Readers/Viewers
1. Determine how many LED's does it take to power up the solar photo-voltaic panel to operate
an inverter.
3. Make Joule Thief Circuits with JFET's that power LED's. You must show proof of functions.
4. Build Greenhouse power plants for homes. You must show proof of function and operation..