Documente Academic
Documente Profesional
Documente Cultură
The difficulty to get into the factory adjustment Sanyo TV. Below are some alternatives to try.
Method 1: (widely used in flat TV) Press and hold MENU on the front panel Press "1" on the remote (or there is a number "2") Press the MENU button on the remote to exit (the data will automatically be stored) To navigate using the Cursor Up / Down (or MUTE-TIMER) and Vol Up / down
Method 2: Turn off the switch or unplug the power play electric outlet Press and hold the Vol-down Turn on airplane To exit / save the data press MENU
Method 3: (widely used in the flat) Press and hold the Vol-down on the front panel Press the green button on the remote Teletext The number keys to select the sub-menu Navigation with Chanel and Volume Exit with other keys that are not used
How to: 4 Press the MENU button on the remote and off Rapidly changing press the Vol-up on the front panel Navigation with Chanel buttons and Volume
Method 5: Press the MEMORY button on the front panel and then remove Quickly press the MENU button on the remote (or MEMORY) Navigation with SOUND SET on the remote
Method 6: On the remote control Press the MENU Then continue press DISPLAY (3x) Navigation using Chanel and Volume Exit the DISPLAY
How to: 8 Press and hold the FUNCTION button on the remote Then press the Ch-up on the front panel Navigation with Chanel and Level Exit unplug the power jack
Press Vol-up on the remote Navigation with TIMER-MUTE and Vol Up / Down Exit with MENU -------------------------------------------------- ---------------------------------------------
How to replace memory IC Sanyo: Replace the memory vacancies Turn on TV Press and hold the TV / AV on the front panel for at least about 2 seconds Will appear the words "CLR" Press the Ch-up on the front panel Memory initialization to be completed until the note number "1" Enter the service mode to adjustment following data: Item 01 RF AGC, RF AGC Horizontal center Item 02, H-PHA Vertical size Item 04, V-siz Vertical-S correction Item 05, V-SCO Vertical linearity Item 06, V-LIN Gr