Documente Academic
Documente Profesional
Documente Cultură
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
Products
BOLT FORMER
.3 STATION BOLT FORMER BF-SERIES .4 STATION BOLT FORMER BF-SERIES
1 of 6
2/9/2013 11:55 PM
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
NR-SERIES
NUT FORMER
.5 STATION NUT FORMER NF-SERIES .5 STATION / 6 STATION LONG STROKE NUT FORMER NL-SERIES SPECIFICATION MODEL FORGING STATION NO. OF FINGER'S CUT-OFF DIA (MAX) (MM) CUT-OFF LENGTH (MIX) (MAX) (MM) KICK-OUT LENGTH (MIX) (MAX) (MM) PUNCH KICK-OUT LENGTH (MAX) (MM) CUT-OFF KNIFE (DIA x LENHTH) (MM) CUT-OFF QUILL (DIA x LENGTH) (MM) MAIN DIE (DIA x LENGTH) (MM) CENTER DISTANCE BETWEEN DIES(MM) PUNCH HOLE (DIA x LENGTH) (MM) RAM STROKE (MM) FINGER OPEN UP-SETTING (MAX) (MM) FORGING POWER (TON) BP-13B-6S 6 7 16 19/135 100/40 BP-19B-6S 6 7 23 15/165 120/50 BP-24B-6S 6 7 30 30/200 160/80
20.35.50
20.35.50
20.40.60
49 x 18
73 x 28
85x 35
2 of 6
2/9/2013 11:55 PM
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
DIAM.STD BOLT (MAX) OUTPUT PCS/MINUTE (MAX) MAIN MOTOR (HP) LUBRICATION MOTOR (HP) COOLING MOTOR (HP) LUBRICATION (L) COOLANT (L) APPROX.WT (KG) FLOOR AREA REQUIRED (M)(LENGTH x WIDTH)
SPECIFICATION MODEL FORGING STATION NO. OF FINGER'S CUT-OFF DIA (MAX) (MM) CUT-OFF LENGTH (MIX) (MAX) (MM) KICK-OUT LENGTH (MIX) (MAX) (MM) PUNCH KICK-OUT LENGTH (MAX) (MM) CUT-OFF KNIFE (DIA x LENHTH) (MM) CUT-OFF QUILL (DIA x LENGTH) (MM) MAIN DIE (DIA x LENGTH) (MM) CENTER DISTANCE BETWEEN DIES
25.50.75
25.55.80
30.60.90
95 x 35
105 x 37
115 x 37
3 of 6
2/9/2013 11:55 PM
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
PUNCH HOLE (DIA x LENGTH) (MM) RAM STROKE (MM) FINGER OPEN UP-SETTING (MAX) (MM) FORGING POWER (TON) DIAM.STD BOLT (MAX) OUTPUT PCS/MINUTE (MAX) MAIN MOTOR (HP) LUBRICATION MOTOR (HP) COOLING MOTOR (HP) LUBRICATION (L) COOLANT (L) APPROX.WT (KG) FLOOR AREA REQUIRED (M)(LENGTH x WIDTH)
100 x 220 360 47(23.5) 400 DIN 931 M24x200L 70 125 2 1 900 700 95000 14.0(19.0) x 7.5
110 x 250 440 STD.50 UP-SETTING55 500 DIN 931 M27x250L 60 150 2x2 1 950 700 115000 16.0(22.0) x 8.5
120 x 290 520 STD.50 UP-SETTING55 600 DIN 931 M30x370L 50 175 2x2 1 1000 800 145000 19(25.0) x 9.5
* THE FLOOR AREA MENTIONED DOES NOT INCLUDE THE WIRE STAND. * WE RESERVE THE RIGHT TO CHANGE THE DESIGNS & SPECIFICATIONS WITHOUT NOTICE.
Features
4 of 6
2/9/2013 11:55 PM
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
Newly patented design; PKO stroke MECHANISM: can be individually adjusted simply I-TYPE transfer housing combine setting on each station, the P.K.O cam with 3 positions, tools change can be done in short time. with Rotation type, the chuck finger enables to turn 180 or not. In this system, it can be used lifting type finger for large head parts produce.
According to customers need, K.O. length position can be adjusted by hand wheel system or motor control.(Optional)
D. BP19B-6S PFAS MECHANISM : PFAS (Parts Forming Assist System) has been developed for secure transfer support of blanks like short shank parts which are difficult to chuck properly .
clamp the formed blank on specific inverter, it helps to reach the conveyor, it prevent the damage in production speed in the position surface of the parts. which can reduce production costs.
5 of 6
2/9/2013 11:55 PM
http://www.kingan.com.tw/proshow_5_6-STATION-SPECIAL-PART-FORMER-BP-SERIES.html
According to customers need, feed stopper length can be adjusted by length can be adjusted by the servo motor adjusting system. (Optional) the servo motor system.(Optional)
Home | About us | Products | News | E-Catalog | Contact us | Sitemap NO.1, LANE 56, SEC.1, PAOAN ROAD, JEN-TE DIST., TAINAN CITY, TAIWAN TEL: 886-6-3660891 FAX: 886-6-3660892 E-mail: kingann@ms42.hinet.net 2010-2013 KING ANN (KING AN) INDUSTRIAL CO., LTD. Design by AP Magazine
6 of 6
2/9/2013 11:55 PM