Sunteți pe pagina 1din 364

2013 01 Issue

Huawei Antenna & Antenna Line Products Catalogue

HUAWEI TECHNOLOGIES CO., LTD.

Huawei' Vision
To focus on customers' challenges and needs in MBB Era by providing best network antenna solutions based on deep insight into network.

Huawei Network Antenna, Leading to Mobile Broadband Era


Huawei has been dedicated to participate in mobile communications for over 20 years. and always absorbed to design and produce Base Station Antenna with some 300 experts and engineers in ve R&D centers based in China, Germany, Canada and USA. Huawei has been awarded more than 100 BTS antenna patents and has membership in more than 50 standardization organizations. Thanks to Huawei's experience as well as its industryleading network designs, performance simulation platforms, and precise 3D spherical antenna near-field testing system, Huawei is capable of providing network antennas with optimal network performance.

Industry-Leading Antenna Solutions


Antennas for Optimal Network Performance Huawei is a pioneer in designing antenna for better network performance. All antennas are analyzed and optimized using network simulation systems. This makes it possible for Huawei antennas to provide enhanced network performance (10% better than traditional antennas). Supporting Full Range of Frequency Bands and Reducing TCO Huawei provides more than 100 types of mainstream antennas covering frequency ranges from 698 MHz to 2690 MHz, with the support from single band to penta-band. Huawei's antennas lead the industry in terms of width, weight, wind load and "green upgrade" support to minimize tower modernization costs and rental fees. Easy Maintenance for Reducing OPEX Huawei's EasyRET solution for antennas eliminates extra sites visit due to incorrect

installation and shortens installation time by 95%. RCUs Integrated improve reliability while reducing antenna installation and RCU maintenance costs by 80%. Imbedded RCU software requires no conguration, and improves service provisioning efciency by approximately 95%. Flexible MIMO Congurations Flexible configurations are available for multi-band(700/ 800/1800/1900/2100/2300/2600 MHz) for LTE in 2T2R/2T4R/ 4T4R/4T8R/8T8R MIMO. One time deployment supports longterm evolution. Supporting Evolution to AAS The integration of Radio Unit within the antenna is the elimination of several components like cables, connectors, and mounting hardware and an overall reduction in the physical tower space required. Huawei can provide an industry-leading active antenna

system (AAS) to handle dynamic capacity requirements, and the aesthetics of the site can be improved and wind load reduced by integrating RRU functionality into the antenna. High-Performing TMA and Easy O&M Huawei can provide Dual Tower Mounted Amplier(DTMA) and Dualband Tower Mounted Amplier with less noise gure, lower insertion loss and PIM, which improves uplink receiver sensitivity of radio system. Huawei is also the only vendor in the world to provide remote gain control as well as electrical labeling (essential to TMA asset management). Huawei is committed to improving its customers' Wireless Communications Network capacities over the long-term. We look forward to cooperating with you in delivering optimal network performance using our antenna solutions.

Huawei Antenna & Antenna Line Products Catalogue >>

Huawei's SG128 spherical near eld testing system - the world's most advanced antenna testing system:
High-performing ultra-broadband dual-polarization probes Five-axis precision turret for military use (can be rotated with 0.01 degree precision) Albatross high-performing shielded room from Germany AEMI radar absorbing materials from the US Precise and stable equipment imported from industry-leading countries Infrared laser for calibration and dedicated installation support Full series of installation poles Industry-leading temperature control technology

Huawei Antenna & Antenna Line Products Catalogue >>

Huawei Antenna Test Standard


Type Low Temperature Exposure High Temperature Exposure Temperature Cycling Humidity Reference ETSI 300 019 - 2 - 4 Method IEC 60068 - 2 - 1 Condition -55 Duration 16h Parameters Tested Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post)

ETSI 300 019 - 2 - 4

IEC 60068 - 2 - 2

+70

16h

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 14

-55C/+70C

5cycles,50h

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 30

+25C/+55C @ 95% RH

10cycles,240h

Wind Loading

ETSI 300 019 - 2 - 4

IEC 721 - 3 - 4

Simulated constant force of Visual/physical exam VSWR 3surfaces,144h 200 km/h wind ISO and PIM (pre and post) sinusoidal 6.15mm,10m/ s2,2-9HZ 9HZ-200HZ Truck level 3 3axes5 sweep cycles 3 axes,90min Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post)

Vibration Transportation Vibration Shocks(without package) shocks (with package) Drop (with package) Rain (in water chamber) Wind Driven Rain Salt Fog (Continuous) Salt Fog (Cyclic) Solar (UV) Exposure Dust and sand

ETSI 300 019 - 2 - 4

IEC 60068 - 2 - 6

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 64

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 27

300 m/s2,6ms pulse width

72s

ETSI 300 019 - 2 - 2 IEC 60068 - 2 - 27

300 m/s2,6ms pulse width

72s

ETSI 300 019 - 2 - 2

ISO 12048

6surfaces/4Angles/3Edges

13 drops

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 18 MIL - STD - 810 Method 506.3

0.067m3/min,5r/min 150mm/h,31m/s,0.5mm4.5mm,45 5%NaCl mist @+40C 5%NaCl mist @+15/+40C,93% RH 1120W/s2 @+40C 150um-850um,1g/m3,20m/ s @+70C,RH<30%

2h

GR - 487 - CORE

4surfaces,more Visual/physical exam VSWR than 120min ISO and PIM (pre and post) 1000h Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post)

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 11

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 52

10 cycles,240h 24h/ cycle,56days 8h

ETSI 300 019 - 2 - 4

IEC 60068 - 2 - 5

ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 68

Huawei Antenna & Antenna Line Products Catalogue >>

Antenna Type Naming Rule

Example: D XXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/17.5i-M/M/M-B\R

Figure:

X1

X2

X3

X4

X5

X6

X7

Polarization

Half-power Beamwidth

Downtilt method Gain Antenna Characteristic Directional Omni-directional Cluster Indoor Smart Beam Multi Beam X Polarization Vertical Polarization Horizontal Polarization Circular Polarization Frequency Bandwidth Half-power beam Width Gain(dBi) 0F: Fixed downtilt M: Electrical downtilt Combiner Integrated Bias Tee Integrated TMA Integrated RCU Integrated Azimuth Steering High Efciency

Antenna type

Frequency range D O

X1

C I S M X

X2

V H C

X3 X4 X5 X6

Number Number Number Number + Letter Number C B T

X7

R AS HE ESLS F

Enhanced Side lobe Suppression RCU Factory Pre-commissioning

Huawei Antenna & Antenna Line Products Catalogue >>

Figure shows naming rules for models Figure:


1 23456 89 10 11 12

TMA Example: ATA261100


A TA2611 00 v01

(Optional) Version

v01/v02 version(or blank) Identify different characters in ascending order TA(TMA short) + Frequency + Protocol(AISG1.1/2.0) ALD Products

Identication

Function

Product type

Antenna Example: ADU451807v01


A DU4518 07 v01

Combiner Example: ACOMD2H00


A COMD2H 00 v01

v01/v02 version(or blank) Identify different characters in ascending order Frequency info+ Polarization + Gain

v01/v02 version(or blank) Identify different characters in ascending order Combiner+Channel +Unit Number +DC bypass properpies ALD Products Notes: 45: single-band 450470 MHz antennas 79: single-band 790960 MHz antennas 90: single-band 806960 MHz antennas 19: single-band 17102200 MHz or 17102170 MHz antennas 25: single-band 23002700 MHz antennas 26: single-band 17102690 MHz antennas DU: dual-band antennas TR: tri-band antennas QU: quad-band antennas PE: penta-band antennas 80: TMAs working at 800 MHz 90: TMAs working at 900 MHz 18: TMAs working at 1800 MHz 21: TMAs working at 2100 MHz 26: TMAs working at 2600 MHz DU: dual-band TMAs

Antenna Products

RCU Example: ARCU01109


A RCU011 09 v01

v01/v02 version(or blank) Identify different characters in ascending order RCU + Protocol (AISG1.1/2.0 )

ALD Products

Huawei Antenna & Antenna Line Products Catalogue >>

Contents
Product Portfolio
A. Huawei Network Antennas
A - 1. FET Antenna A - 2. Single Band Antenna A - 3. Dual-band Antenna A - 4. Triple-band Antenna A - 5. Quad-band Antenna A - 6. Penta-band Antenna A - 7. TDD Antenna A - 8. Cluster Antenna A - 9. Antenna Integrated Bracket

C. Accessories for RET Systems


C - 1. Remote Control Unit (RCU) C - 2. Bias Tee (BT) C - 3. Smart Bias Tee (SBT) C - 4. AISG Connecting Cables C - 5. Portable Control Unit (PCU)

B. Antenna Line Products


B - 1. Tower Mounted Ampliers B - 2. Combiners

D. Mounting Instructions
D - 1. MET Installation Guide D - 2. RET Installation Guide D - 3. FET Installation Guide D - 4. Tri-sector Cluster Installation Guide

Co nt en ts i

Huawei Antenna & Antenna Line Products Catalogue >>

Index
A. Huawei Network Antennas
A - 1. FET Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

450-470 450-470 806-960 806-960 806-960 806-960 806-960 806-960 806-960 806-960 806-960 806-960 806-960 806-960 790-960 790-960 790-960 790-960 790-960 1710-2170 1710-2170

v x x x x x x x x x x x x x x x x x x x x

360 65 65 65 65 65 65 65 65 65 65 65 90 90 65 65 65 65 65 90 90

9 15 15 15 15 15.3 15.3 17 17 18 18 18 17 17 17 17 17 18 18 17 17

0 0 0 3 6 0 6 0 3 0 3 6 0 3 0 3 6 0 3 0 3

FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET

1 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female

52 x 3316 2042 x 486 x 98 1322 x 289 x 85 1322 x 289 x 85 1322 x 289 x 85

A45VP0900 A45451500 A90451500 A90451505 A90451501 A90451502 A90451503 A90451700 A90451705 A90451800 A90451805 A90451801 A90451600 A90451706 A90451702v01 A90451705v01 A90451709 A90451802v01 A90451805v01 A19451704 A19451705

1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28

2 x 7/16 DIN 1312 x 295 x 126 Female 2 x 7/16 DIN 1312 x 295 x 126 Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 1932 x 289 x 85 1932 x 289 x 85 2572 x 289 x 85 2572 x 289 x 85 2572 x 289 x 85

2 x 7/16 DIN 2526 x 268 x 125 Female 2 x 7/16 DIN 2526 x 268 x 125 Female 2 x 7/16 DIN 1936 x 260 x 135 Female 2 x 7/16 DIN 1936 x 260 x 135 Female 2 x 7/16 DIN 1936 x 260 x 135 Female 2 x 7/16 DIN 2535 x 259 x 135 Female 2 x 7/16 DIN 2535 x 259 x 135 Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 1306 x 155 x 79 1306 x 155 x 79

In ii

de

Huawei Antenna & Antenna Line Products Catalogue >>

Frequency 3dB Horizontal Polarization Range (MHz) beam width ()

Gain (dBi)

Electrical Tilt downtilt () Method

Connector

Dimension (mm)

Model

Page

1710-2170 1710-2170 1710-2170 1710-2170 1710-2200 1710-2200 1710-2200 1710-2200 1710-2200

x x x x x x x x x

65 33 65 65 65 65 65 65 65

18 21 21 21 15.5 15.5 18 18 18

2 0 0 2 3 6 0 3 6

FET FET FET FET FET FET FET FET FET

2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female

1306 x 155 x 79 1318 x 289 x 85 2170 x 155 x 79 2170 x 155 x 79 702 x 155 x 89 702 x 155 x 89 1311 x 155 x 89 1311 x 155 x 89 1311 x 155 x 89

A19451801 A19452102 A19452100 A19452103 A19451601 A19451602 A19451800v01 A19451810v01 A19451802v01

30 31 32 33 34 36 38 40 42

A - 2. Single Band Antenna


Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

806-960 790-960 790-960 790-960 698-960 698-960 698-960 698-960 1710-2170 1710-2170 1710-2200 1710-2200
** Preliminary Issue

x x x x x x x x x x x x

90 65 65 65 65 65 65 90 90 33 65 65

17 15 16.5 17.5 15 16.5 17.5 15 17 21 15.5 18

2-9.5 0-14 0-12 0-10 0-14 0-12 0-10 0-12 2-10 2-10 012 0-10

MET MET MET MET MET MET MET MET MET MET MET MET

2 x 7/16 DIN 2526 x 268 x 125 Female 2 x 7/16 DIN 1356 x 259 x 135 Female 2 x 7/16 DIN 1936 x 259 x 135 Female 2 x 7/16 DIN 2535 x 259 x 135 Female 2 x 7/16 DIN 1356 x 259 x 135 Female 2 x 7/16 DIN 1936 x 259 x 135 Female 2 x 7/16 DIN 2535 x 259 x 135 Female 2 x 7/16 DIN 1936 x 259 x 135 Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 1306 x 155 x 79 1318 x 289 x 85 702 x 155 x 89 1311 x 155 x 89

A90451704 A79451500v01 A79451600v01 A79451700v01 **A70451501 **A70451600 **A70451700 **A70451500 A19451703 A19452101 A19451505 A19451811

44 45 46 48 50 51 52 53 54 55 56 58

In de x iii

Huawei Antenna & Antenna Line Products Catalogue >>

Frequency 3dB Horizontal Polarization Range (MHz) beam width ()

Gain (dBi)

Electrical Tilt downtilt () Method

Connector

Dimension (mm)

Model

Page

1710-2200 1710-2200 1710-2690 1710-2690 1710-2690 1710-2690


** Preliminary Issue

x x x x x x

65 65 65 65 65 65

18 19.5 16 18 18 19.5

0-10 0-6 0-14 0-12 0-12 0-8

EasyRET MET MET MET EasyRET MET

2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female

1315 x 155 x 89 1954 x 155 x 89 790 x 155 x 109

A194518R0 A19451902 **A26451500

60 62 64 65 67 69

2 x 7/16 DIN 1365 x 155 x 109 **A26451800v01 Female 2 x 7/16 DIN 1365 x 155 x 109 Female **A264518R0

2 x 7/16 DIN 1690 x 155 x 109 **A26451900v01 Female

A - 3. Dual-band Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

790-862/ 880-960 790-862/ 880-960 790-862/ 880-960 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2180 790-960/ 1710-2690
** Preliminary Issue

xx xx xx xx xx xx xx xx x x x xx xx xx

65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65

14.5/15 16/16.5 17/17.5 15/17.5 16.5/18.5 16.5/18.5 17.5/18.5 17.5/18.5 15/17.5 16.5/18.5 17.5/18.5 16.5/18.5 17.5/18.5 15/17.5

0-14/0-14 EasyRET 0-12/0-12 EasyRET 0-10/0-10 EasyRET 0-14/0-10 0-12/0-8 0-12/0-8 0-10/0-8 0-10/0-8 0-14/0-10 0-12/0-8 0-10/0-8 0-12/0-8 0-10/0-8 0-14/0-10 MET MET EasyRET MET EasyRET

4 x 7/16 DIN 1536 x 349 x 166 Female 4 x 7/16 DIN 1999 x 259 x 135 Female 4 x 7/16 DIN 2538 x 259 x 135 Female 4 x 7/16 DIN 1360 x 259 x 135 Female 4 x 7/16 DIN 1936 x 259 x 135 Female 4 x 7/16 DIN 1936 x 259 x 135 Female 4 x 7/16 DIN 2535 x 259 x 135 Female 4 x 7/16 DIN 2535 x 259 x 135 Female

**ADU4515R0 ADU4516R0 ADU4517R0 ADU451503 ADU451602v01 ADU4518R3 ADU451807v01 ADU4518R0 **ADU4517C0 **ADU4518C1 ADU4518C0 ADU451820 ADU451821 **ADU451716

70 72 74 76 78 80 82 84 86 87 88 90 92 94

MET+ 2 x 7/16 DIN 1360 x 259 x 135 Combiner Female MET+ 2 x 7/16 DIN 1936 x 259 x 135 Combiner Female MET+ 2 x 7/16 DIN 2535 x 259 x 135 Combiner Female METESLS METESLS MET 4 x 7/16 DIN 1936 x 259 x 135 Female 4 x 7/16 DIN 2535 x 259 x 135 Female 4 x 7/16 DIN 1450 x 298 x 148 Female

In iv

de

Huawei Antenna & Antenna Line Products Catalogue >>

Frequency 3dB Horizontal Polarization Range (MHz) beam width ()

Gain (dBi)

Electrical Tilt downtilt () Method

Connector

Dimension (mm)

Model

Page

790-960/ 1710-2690 790-960/ 1710-2690 1710-2200/ 1710-2200 1710-2200/ 1710-2200 1710-2200/ 1710-2200 1710-2200/ 1710-2200 1710-2170/ 2490-2690 1710-2690/ 1710-2690 1710-2690/ 1710-2690 1710-2690/ 1710-2690 1710-2690/ 1710-2690 2300-2690/ 2300-2690
** Preliminary Issue

xx xx xx xx xx xx xx xx xx xx xx xx

65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65

16/18.5 17/18.5 15.5/15.5 18/18 18/18 19.5/19.5 18/18 16/16 18/18 18/18 19.5/19.5 18/18

0-10/0-8 0-10/0-8 0-12/0-12 0-10/0-10

MET MET MET MET

4 x 7/16 DIN 2020 x 298 x 150 Female 4 x 7/16 DIN 2598 x 298 x 148 Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 701 x 323 x 89 1311 x 323 x 89 1311 x 323 x 89 1954 x 323 x 89

ADU451604 **ADU451712 **ADU451611 ADU451819 ADU4518R1 ADU451902 **ADU4518R5 **ADU451507 ADU451816v01 **ADU4518R6

95 97 99 100 102 104 106 108 109 111 113 114

0-10/0-10 EasyRET 0-6/0-6 MET

0-12/0-12 EasyRET 0-14/0-14 0-12/0-12 MET MET

4 x 7/16 DIN 1445 x 155 x 109 Female 4 x 7/16 DIN Female 790 x 299 x 109

4 x 7/16 DIN 1365 x 299 x 109 Female 4 x 7/16 DIN 1365 x 323 x 109 Female

0-12/0-12 EasyRET 0-8/0-8 0-10/0-10 MET MET

4 x 7/16 DIN 1690 x 299 x 109 **ADU451901v01 Female 4 x 7/16 DIN Female 1060 x 289 x 85 A25451805

A - 4. Triple-band Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2180/ 1710-2180
** Preliminary Issue

xxx

65/65/65

15/15/15

0-14/ 0-14/0-14 0-12/ 0-12/0-12

MET

6 x 7/16 DIN 1454 x 259 x 135 Female 6 x 7/16 DIN 2098 x 259 x 135 Female

ATR451500

116 118 120 122 124 126

xxx

65/65/65

16.5/16.5/16.5

MET

ATR451602v01

xxx

65/65/65

16.5/16.5/16.5

0-12/ 6 x 7/16 DIN EasyRET 2098 x 259 x 135 0-12/0-12 Female 0-10/ 0-10/0-10 0-12/ 0-12/0-12 0-10/ 0-10/0-10 MET METESLS METESLS 6 x 7/16 DIN 2680 x 259 x 135 Female 6 x 7/16 DIN 2098 x 259 x 135 Female 6 x 7/16 DIN 2680 x 259 x 135 Female

ATR4516R0

xxx

65/65/65

17.5/17.5/17.5

ATR451704v01

xxx

65/65/65

16.5/16.5/16.5

ATR451612

xxx

65/65/65

17.5/17.5/17.5

ATR451713

In x de v

Huawei Antenna & Antenna Line Products Catalogue >>

Frequency 3dB Horizontal Polarization Range (MHz) beam width ()

Gain (dBi)

Electrical Tilt downtilt () Method

Connector

Dimension (mm)

Model

Page

790-960/ 1710-2180/ 1710-2180 790-960/ 1710-2690/ 1710-2690 790-960/ 1710-2690/ 1710-2690 790-960/ 1710-2690/ 1710-2690 790-960/ 1710-2690/ 1710-2690 790-960/ 1710-2690/ 1710-2690 698-960/ 1710-2690/ 1710-2690 1710-2690/ 1710-2170/ 2490-2690 1710-2690/ 1710-2690/ 1710-2690
** Preliminary Issue

xxx

65/65/65

17.5/17.5/17.5

0-10/ 6 x 7/16 DIN EasyRET 2680259135 0-10/0-10 Female 0-10/ 0-8/0-8 0-10/ 0-8/0-8 0-14/ 0-10/0-10 0-10/ 0-8/0-8 0-10/ 0-8/0-8 0-10/ 0-8/0-8 EasyRET 6 x 7/16 DIN 1999 x 349 x 166 Female 6 x 7/16 DIN 2593 x 349 x 166 Female 6 x 7/16 DIN 1472 x 349 x 166 Female 6 x 7/16 DIN 1999 x 349 x 166 Female 6 x 7/16 DIN 2593 x 349 x 166 Female 2685 x 349 x 148

ATR4517R0

128 130 132 134 135 136 137 139 141

xxx

65/65/65

16/18/18

**ATR4518R4

xxx

65/65/65

17/18/18

EasyRET

**ATR4518R7

xxx

65/65/65

15/17.5/17.5

MET

**ATR451709

xxx

65/65/65

16/18/18

MET

**ATR451606

xxx

65/65/65

17/18/18

MET

**ATR451607

xxx

65/65/65

17/17.5/17.5

EasyRET+ 6 x 7/16 DIN SBT Female

**ATR4518R9

xxx

65/65/65

18/18/18

0-10/ 6 x 7/16 DIN EasyRET 1445 x 299 x 109 0-10/0-10 Female 0-12/ 0-12/0-12 MET 6 x 7/16 DIN 1445 x 449 x 115 Female

**ATR4518R3

xxx

65/65/65

18/18/18

**ATR451714

A - 5. Quad-band Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

790-960/ 1710-2690/ 1710-2170/ 2490-2690 790-960/ 1710-2690/ 1710-2170/ 2490-2690

xxxx

65/65/65/65

16/18/18/18

0-10/0-8/ 8 x 7/16 DIN EasyRET 1999 x 349 x 166 0-8/0-8 Female

**AQU4518R0

142

xxxx

65/65/65/65

17/18/18/18

0-10/0-8/ 8 x 7/16 DIN EasyRET 2593 x 349 x 166 0-8/0-8 Female

**AQU4518R1

144

** Preliminary Issue

A - 6. Penta-band Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

698-960/ 1710-2690/ 1710-2690/ 1710-2690/ 1710-2690

xxxxx

65/65/ 65/65/65

17/17.5/ 17.5/17/17

0-10/0-10/ 10 x 7/16 DIN 0-10/0-10/ EasyRET 2695 x 349 x 166 Female 0-10

**APE4517R2

146

** Preliminary Issue

In vi

de

Huawei Antenna & Antenna Line Products Catalogue >>

A - 7. TDD Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

1880-2690 1880-2690 1880-2690 1880-2690

x x x x

90 90 90 90

16 16 16 16

0 3 6 9

FET FET FET FET MET+ Combiner MET+ Combiner MET+ Combiner MET+ Combiner MET MET

9 x N Female 1396 x 319 x 116

**ATD451600 **ATD451601 **ATD451602 **ATD451603

148 150 152 154 156 158 160 162 164 165

9 x N Female 1396 x 319 x 116


9 x N Female 1396 x 319 x 116

9 x N Female 1396 x 319 x 116


4 x Circular Multipin Connnector 1396 x 319 x 116

1880-2690

90

16

**ATD4516C0

1880-2690

90

16

4 x Circular 1396 x 319 x 116 Multipin Connnector


4 x Circular Multipin Connnector 1396 x 319 x 116

**ATD4516C1

1880-2690

90

16

**ATD4516C2

1880-2690

90

16

4 x Circular 1396 x 319 x 116 Multipin Connnector


2 x N Female 1060 x 155 x 79

**ATD4516C3

2300-2700 2300-2700/ 2300-2700


** Preliminary Issue

x xx

60 65/65

18 18/18

2-10 2-10

A25451804 A25451803

4 x N Female 1060 x 289 x 85

A - 8. Cluster Antenna
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page

1710-2690

65

18

2-12

MET

3 x 2 x 7/16 DIN Female

1793 x 230 & 250

A264518S0

166

A - 9. Antenna Integrated Bracket


Bracket type TSC-S (3 Sector Clamp-Small) TSC-M (3 Sector Clamp-Medium) TSC-L (3 Sector Clamp-Large) Antenna Width Reqired <280mm <380mm <400mm Weight (Kg) 5.8 6.3 6.6 Dimension (mm) 88.9mm (3.5inch) 114.3mm (4.5inch) 139.7mm (5.5inch) Model ASMC00001 ASMC00002 ASMC00003 Page

168

**AISG Color Coding Standard

170

In de x i vi

Huawei Antenna & Antenna Line Products Catalogue >>

B. Antenna Line Products


B - 1. Tower Mounted Ampliers
Description Frequency Range (MHz) RX : 832 - 862 DD800MHz TX : 791 - 821 RX : 880 - 905 EGSM 900MHz SUBBAND TX : 925 - 950 RX : 880 - 915 EGSM 900MHz TX : 925 - 960 RX : 890 - 915 PGSM 900MHz TX : 935 - 960 RX : 1710 - 1785 1800MHz TX : 1805 - 1880 RX : 1920 - 1980 2100MHz TX : 2110 - 2170 RX : 2500 - 2570 2600MHz TX : 2620 - 2690 RX : 880 - 915 900MHz Bypass 1800MHz TX : 925 - 960 RX : 1920 - 1980 2100MHz Bypass 900MHz TX : 2110 - 2170 RX : 1920 - 1980 2100MHz Bypass 1800MHz TX : 2110 - 2170 RX : 1920 - 1980 2100MHz Bypass 900/1800MHz TX : 2110 - 2170
** Preliminary Issue

AISG type AISG v1.1 AISG v2.0 AISG v1.1 AISG v2.0 AISG v1.1 AISG v2.0 AISG v1.1 AISG v2.0 AISG v1.1

Gain (dB)

Dimension (mm)

Model ATA801100

Page

8 - 16 190 x 240 x 120 (0.5 dB Step)

172
ATA802000 ATA901102

8 - 16 198 x 308 x 70.5 (0.5 dB Step)

175
ATA902002 ATA901101

8 - 16 248 x 324 x 75.5 (0.5 dB Step)

178
ATA902001 ATA901103

8 - 16 198 x 308 x 70.5 (0.5 dB Step)

181
ATA902003 ATA181101

12 AISG v2.0 AISG v1.1 12 AISG v2.0 AISG v1.1 12 AISG v2.0

160 x 220 x 100 ATA182001 ATA211101 160 x 205 x 54.5 ATA212001 ATA261100 160 x 210 x 54.5 ATA262000

184

187

190

AISG v2.0

8-16 248 x 324 x 100 (0.5 dB Step)

**ATA902004

193

AISG v2.0

12

228 x 205 x 54.5

**ATA212004

196

AISG v2.0

12

175 x 245 x 100

**ATA212002

199

AISG v2.0

12

224 x 312 x 95

**ATA212003

202

In vi ii

de

Huawei Antenna & Antenna Line Products Catalogue >>

Description Dullband DCS1800&UMTS2100 (2input2output)

Frequency Range (MHz) RX : 1710 - 1785/1920 - 1980

AISG type

Gain (dB)

Dimension (mm)

Model

Page

AISG v2.0 TX : 1805 - 1880/2110 - 2170 RX : 1710 - 1785/1920 - 1980 AISG v2.0 TX : 1805 - 1880/2110 - 2170 RX : 832 - 862/880 - 905 AISG v2.0 TX : 791 - 821/925 - 950 RX : 832 - 862/880 - 905 AISG v2.0 TX : 791 - 821/925 - 950

12

196 x 280 x 110

**ATADU2002

205

Dullband DCS1800&UMTS2100 (2input4output)

12

196 x 280 x 110

**ATADU2003

208

Dullband DD800&EGSM900 (2input2output)

12

247 x 342 x 132

**ATADU2001

211

Dullband DD800&EGSM900 (2input4output)


** Preliminary Issue

12

247 x 342 x 132

**ATADU2005

214

B - 2. Combiners
Catagery Pass Band (MHz) Band 1 : 790 - 862 Band 2 : 880 - 960 Band 1 : 790 - 862 Band 2 : 880 - 960 Band 1 : 790 - 862 Band 2 : 880 - 960 Band 1 : 790 - 862 Band 2 : 880 - 960 Band 1 : 790 - 862 Band 2 : 880 - 2200 Band 1 : 698 - 960 Band 2 : 1710 - 2200
** Preliminary Issue

Max. Input power (W) 200 200 200 200 200

DC-Bypass

Intermodulation Dimension (mm) (dBm) Double Unit: 180 x 210 x 107

Model

Page

880 - 960MHz DC-bypass

< -110

ACOMD2H09

217

880 - 960MHz DC-bypass

< -117

Double Unit: 180 x 210 x 107

ACOMD2H04

220

All DC-bypass Dual-band Combiner 200 200 All DC-bypass 200 300 All DC-bypass 300 300 300

< -110

Double Unit: 180 x 210 x 107

**ACOMD2H18

223

< -117

Double Unit: 180 x 210 x 107

**ACOMD2H15

226

< -117

Double Unit: 220 x 210 x 115

**ACOMD2H14

229

1710 - 2200MHz DC-bypass

< -110

Double Unit: 130 x 190 x 105

ACOMD2H11

232

In x de ix

Huawei Antenna & Antenna Line Products Catalogue >>

Catagery

Pass Band (MHz) Band 1 : 698 - 960 Band 2 : 1710 - 2200 Band 1 : 698 - 960 Band 2 : 1710 - 2200 Band 1 : 698 - 960 Band 2 : 2490 - 2700 Band 1 : 698 - 960 Band 2 : 2490 - 2700 Band 1 : 698 - 960 Band 2 : 2490 - 2700 Band 1 : 698 - 960 Band 2 : 1710 - 2700 Band 1 : 790 - 1880 Band 2 : 1920 - 2200 Band 1 : 790 - 1880 Band 2 : 1920 - 2200 Band 1 : 1710 - 1880 Band 2 : 1920 - 2200 Band 1 : 1710 - 1880 Band 2 : 1920 - 2200 Band 1 : 1710 - 1880 Band 2 : 1920 - 2200 Band 1 : 1710 - 1880 Band 2 : 1920 - 2200

Max. Input power (W) 300 300 300

DC-Bypass

Intermodulation Dimension (mm) (dBm) Double Unit: 130 x 190 x 105

Model

Page

1710 - 2200MHz DC-bypass

< -117

ACOMD2H10

235

All DC-bypass 300 300 300 300 300 300 All DC-bypass 300 300 300 300 300 300 All DC-bypass 300 300 300 300 All DC-bypass 300 300 300 300 All DC-bypass 300

< -110

Double Unit: 130 x 190 x 105

**ACOMD2H19

238

2490 - 2700MHz DC-bypass

< -110

Double Unit: 130 x 190 x 105

ACOMD2H13

241

2490 - 2700MHz DC-bypass

< -117

Double Unit: 130 x 190 x 105

ACOMD2H12

244

< -110

Double Unit: 130 x 190 x 105

**ACOMD2H20

247

1710 - 2700MHz DC-bypass

< -117

Double Unit: 130 x 190 x 105

ACOMD2H00

250

Dual-band Combiner

1920 - 2200MHz DC-bypass

< -110

Double Unit: 190 x 154 x 105

**ACOMD2H02

253

< -110

Double Unit: 190 x 154 x 105

**ACOMD2H21

256

1920 - 2200MHz DC-bypass

< -110

Double Unit: 160 x 154 x 103

ACOMD2H06

259
< -110 Double Unit: 160 x 154 x 103 ACOMD2H08

1920 - 2200MHz DC-bypass

< -117

Double Unit: 160 x 154 x 103

ACOMD2H05

262
< -117 Double Unit: 160 x 154 x 103 ACOMD2H07

** Preliminary Issue

In x

de

Huawei Antenna & Antenna Line Products Catalogue >>

Catagery

Pass Band (MHz) Band 1 : 1710 - 2200 Band 2 : 2490 - 2700 Band 1 : 1710 - 2200 Band 2 : 2490 - 2700

Max. Input power (W) 300 300 300 300 300

DC-Bypass

Intermodulation Dimension (mm) (dBm) Double Unit: 160 x 154 x 103

Model

Page

1710 - 2200MHz DC-bypass

< -110

ACOMD2L04

265

1710 - 2200MHz DC-bypass

< -117

Double Unit: 126 x 102 x 103

ACOMD2L03

268

Dual-band Combiner

Band 1 : 1710 - 2200 Band 2 : 2490 - 2700 Band 1 : 2500 - 2540/2620 - 2660 Band 2 : 2575 - 2595 Band 1 : 2614 - 2624 Band 2 : 2582 - 2602 Band 1 : 790 - 960 Band 2 : 880 - 960 Band 3 : 1710 - 2200 Band 1 : 790 - 960 Band 2 : 1710 - 1880 Band 3 : 1920 - 2200 Band 1 : 790 - 960

All DC-bypass 300 250 250 60 All DC-Stop 60 300 300 300 300 300 300 1920 - 2200MHz DC-bypass All DC-bypass 2500 - 2540/ 2620 - 2660MHz DC-bypass

< -110

Double Unit: 126 x 102 x 103

**ACOMD2H16

271

< -110

Double Unit: 250 x 176 x 103

**ACOMD2L05

274

< -97

Double Unit: 361 x 158 x 120

ACOMD2H25

277

< -117

Double Unit: 220 x 210 x 115

ACOMT2H04

280

< -117

Double Unit: 190 x 154 x 105

ACOMT2H00

283
300 300 300 300 300 300 1920 - 2200MHz DC-bypass < -110 Double Unit: 190 x 154 x 105 ACOMT2H01 1710 - 1880/ 1920 - 2200MHz DC-bypass < -117 Double Unit: 190 x 154 x 105 ACOMT2H02 Tri-band Combiner Band 2 : 1710 - 1880 Band 3 : 1920 - 2200 Band 1 : 790 - 960 Band 2 : 1710 - 1880 Band 3 : 1920 - 2200 Band 1 : 790 - 960 Band 2 : 1710 - 1880 Band 3 : 1920 - 2200
** Preliminary Issue

286
300 300 300 1710 - 1880/ 1920 - 2200MHz DC-bypass < -110 Double Unit: 190 x 154 x 105 ACOMT2H03

In de x xi

Huawei Antenna & Antenna Line Products Catalogue >>

Catagery

Pass Band (MHz) Band 1 : 790 - 960 Band 2 : 1710 - 1880 Band 3 : 1920 - 2200 Band 1 : 790 - 1880

Max. Input power (W) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300

DC-Bypass

Intermodulation Dimension (mm) (dBm)

Model

Page

ALL DC-bypass

< -110

Double Unit: 190 x 154 x 105

**ACOMT2H08

289

Tri-band Combiner

Band 2 : 1920 - 2200 Band 3 : 2490 - 2700 Band 1 : 698 - 960 Band 2 : 1710 - 2200 Band 3 : 2490 - 2700 Band 1 : 790 - 960 Band 2 : 1710 -1880 Band 3 : 1920 - 2200

1920 - 2200MHz DC-bypass

< -110

Double Unit: 215 x 200 x 105

**ACOMT2M00

292

All DC-bypass

< -110

Double Unit: 215 x 200 x 105

**ACOMT2M09

295

1920 - 2200MHz DC-bypass

< -110

Double Unit: 215 x 200 x 105

**ACOMQ2M00

298

Quadband Combiner

Band 4 : 2490 - 2700 Band 1 : 790 - 960 Band 2 : 1710 -1880 Band 3 : 1920 - 2200 Band 4 : 2490 - 2700

All DC-bypass 300 300

< -110

Double Unit: 215 x 200 x 105

**ACOMQ2H00

301

** Preliminary Issue

DC-STOP

Band: 698 - 2700

500

DC-Stop

< -117

Unit: 39 x 151 x 45

**ADCSTOP00

304

** Preliminary Issue

In xi i

de

Huawei Antenna & Antenna Line Products Catalogue >>

C. Accessories for RET Systems


C - 1. Remote Control Unit (RCU)
Antenna and RCU conguration list

307
Adjustment time (full range) (min) <2 Calibration time (min) <4 Dimension (mm) Model ARCU01104 200 x 56 x 47 ARCU02001 < 1.5 <3 (typically, depending (typically, depending on antenna type) on antenna type) ARCU01109 180 x 65 x 54 ARCU02004 Page

Input voltage range (V) DC 10 - 30

AISG type AISG v1.1 AISG v2.0 AISG v1.1

308

DC 10 - 30 AISG v2.0

309

C - 2. Bias Tee (BT)


Frequency Range (MHz) 690 - 2700 AISG type AISG v1.1 AISG v2.0 Insertion loss (dB) 0.1 (690 - 960 MHz / 1710 - 2690 MHz) 0.15 (960 - 1710 MHz) Dimension (mm) 48.5 x 151 x 45 Model ABT000001 Page

310

C - 3. Smart Bias Tee (SBT)


Frequency Range (MHz) 690 - 2700 AISG type AISG v1.1 AISG v2.0 Insertion loss (dB) 0.1 (690 - 960 MHz / 1710 - 2690 MHz) 0.15 (960 - 1710 MHz) Dimension (mm) Model ASBT00001(ANT Side) 75 x 160 x 45 ASBT00002 (BTS Side) Page

313

C - 4. AISG Connecting Cables


AISG Connecting Cables For Remote Electrical Tilt (RET) System AISG Connecting Cables For RRU RET_Port

316 317

C - 5. Portable Control Unit (PCU)


Frequency Range (MHz) DC 12-15V 1.5A AISG type AISG v1.1 AISG v2.0 Insertion loss (dB) Interface to RCU:RS485 / Power supply Interface to PC: USB 2.0 Dimension (mm) 168 x 90 x 44 Model APCU00001 Page

318

In de x xi ii

Huawei Antenna & Antenna Line Products Catalogue >>

D. Mounting Instructions
D - 1. MET Installation Guide
MET Antenna with H-Brackets Installation Guide (A) MET Antenna with L-Brackets Installation Guide MET Antenna with H-Brackets Installation Guide (B)

321 323 325

D - 2. RET Installation Guide


RET Antenna with L-Brackets Installation Guide RET Antenna with H-Brackets Installation Guide

327 330

D - 3. FET Installation Guide


FET Antenna with H-Brackets Installation Guide FET Antenna with L-Brackets Installation Guide

333 335

D - 4. Tri-sector Cluster Installation Guide


Tri-sector Cluster Antenna Installation Guide

337

In xi v

de

Huawei Antenna & Antenna Line Products Catalogue >>

Huawei Network Antennas

OV-450-470-360-9i-0F
Model: A45VP0900

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Horizontal 3dB beam width () Vertical 3dB beam width () Antenna pattern roundness (dB) Electrical downtilt() Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (mm) Net weight (kg) Bracket weight (kg) Mast diameter (mm) Radome material Operating temperature () Max. wind velocity (km/h) Connector 52 x 3316 5.0 2.0 50 - 85 Fiberglass -55 - +65 200 1 x 7/16 DIN Female 450 - 470 Vertical 1.4 9.0 360 11 1 0 -150 150 50 DC Ground

450 - 460 MHz

455 - 465 MHz

460 - 470 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

45

-4 O 70M V

Hz

www.huawei.com

DX-450-470-65-15i-0F
Model: A45451500

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM5 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2042 x 486 x 98 28.3 6.5 0 - 16 50 - 115 Fiberglass -55 - +65 Frontal: 740 (v=150 km/h) Lateral: 220 (v=150 km/h) Rear side: 1100 (v=150 km/h) 200 2 x 7/16 DIN Female 7/16 (F) 7/16 (F) +45 -45 450 - 470 X 450 - 470 +45 , -45 1.5 15 65 16 30 25 15 0 -160 (2 x 43 dBm carrier) 500 50 DC Ground

450 - 460 MHz

455 - 465 MHz

460 - 470 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

45 0

M 70 -4 X D Hz

DX-806-960-65-15i-0F
Model: A90451500

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 14.6 Typ. 17 67 15.5 806 - 866 824 - 894 +45 , -45 1.4 14.8 Typ. 17 65 15.0 Typ. 17 62 880 - 960

14.6 14.0 30 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1322 x 289 x 85 9.5 4.6 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

-9 DX 60M

Hz

www.huawei.com

DX-806-960-65-15i-3F
Model: A90451505

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 14.7 Typ. 17 67 15.5 806 - 866 824 - 894 +45 , -45 1.5 15.0 Typ. 17 65 15.3 Typ. 17 62 880 - 960

14.6 14.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1322 x 289 x 85 9.5 4.6 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

DX-806-960-65-15i-6F
Model: A90451501

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 14.5 Typ. 17 67 15.5 806 - 866 824 - 894 +45 , -45 1.4 14.7 Typ. 17 65 14.9 Typ. 17 62 880 - 960

14.9 14.0 30 25 15 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1322 x 289 x 85 9.5 4.6 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

-9 DX 60M

Hz

www.huawei.com

DX-806-960-65-15.3i-0F
Model: A90451502

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60 806 - 866 1.4 14.8 19 68 15.9 824 - 894 +45 , -45 1.4 15.0 19 66 880 - 960 1.3 15.3 19 64

15.4 14.3 30 30 20 10 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1312 x 295 x 126 10.5 4.6 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 180 (v=150 km/h) Rear side: 430 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

DX-806-960-65-15.3i-6F
Model: A90451503

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60 806 - 866 1.35 14.7 19 68 15.9 824 - 894 +45 , -45 1.35 14.9 19 66 880 - 960 1.3 15.2 19 64

15.4 14.3 30 30 20 10 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1312 x 295 x 126 10.5 4.6 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 180 (v=150 km/h) Rear side: 430 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

-9 DX 60M

Hz

www.huawei.com

DX-806-960-65-17i-0F
Model: A90451700

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 16.6 Typ. 17 67 11.0 806 - 866 824 - 894 +45 , -45 1.37 16.8 Typ. 17 64 17.0 Typ. 17 63 880 - 960

10.5 10.0 28 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1932 x 289 x 85 13.5 4.6 0 - 12 50 - 115 Fiberglass -55 .. +65 Frontal: 420 (v=150 km/h) Lateral: 175 (v=150 km/h) Rear side: 620 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

DX-806-960-65-17i-3F
Model: A90451705

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 16.7 Typ. 17 67 11.0 806 - 866 824 - 894 +45 , -45 1.5 17.0 Typ. 17 64 17.2 Typ. 17 63 880 - 960

10.5 10.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1932 x 289 x 85 13.5 4.6 0 - 12 50 - 115 Fiberglass -55 .. +65 Frontal: 420 (v=150 km/h) Lateral: 175 (v=150 km/h) Rear side: 620 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

-9 DX 60M

Hz

www.huawei.com

DX-806-960-65-18i-0F
Model: A90451800

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 17.4 Typ. 17 67 8.2 806 - 866 824 - 894 +45 , -45 1.45 17.6 Typ. 17 64 17.8 Typ. 17 63 880 - 960

7.5 7.0 28 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2572 x 289 x 85 16.5 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

10

DX-806-960-65-18i-3F
Model: A90451805

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 17.8 Typ. 17 67 8.2 806 - 866 824 - 894 +45 , -45 1.45 18.0 Typ. 17 64 18.2 Typ. 17 63 880 - 960

7.5 7.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2572 x 289 x 85 16.5 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

11

-9 DX 60M

Hz

www.huawei.com

DX-806-960-65-18i-6F
Model: A90451801

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 17.3 Typ. 17 67 8.0 806 - 866 824 - 894 +45 , -45 1.37 17.6 Typ. 17 64 17.8 Typ. 17 63 880 - 960

7.3 6.8 30 25 15 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2572 x 289 x 85 16.5 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

12

DX-806-960-90-17i-0F
Model: A90451600

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60 16.5 18 88 8.1 806 - 866 824 - 894 +45 , -45 1.4 16.8 18 86 17.0 18 84 880 - 960

7.9 7.2 30 25 15 10 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2526 x 268 x 125 16.1 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 510 (v=150 km/h) Lateral: 340 (v=150 km/h) Rear side: 750 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

13

-9 DX 60M

Hz

www.huawei.com

DX-806-960-90-17i-3F
Model: A90451706

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2526 x 268 x 125 17.4 4.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 510 (at 150 km/h) Lateral: 340 (at 150 km/h) Rear side: 750 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.4 19 88 7.9 806 - 960 806 - 866 824 - 894 +45 , -45 3, Fixed 16.7 19 86 7.6 < 1.4 30 25 Typ. 20 10 500 -153 (2 x 43 dBm carrier) Avg. 1.0 Avg. 0.6 (within 10dB HBW) 50 DC Ground 16.9 19 84 7.1 880 - 960

80 6 M 60 -9 X D Hz

14

DX-806-960-90-17i-3F
Model: A90451706

120

Unit: mm

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 960 MHz

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80

15

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-17i-0F
Model: A90451702v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 12.9 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 20 67 9.8 790 - 960 790 - 862 824 - 894 +45 , -45 0, Fixed 16.7 20 65 9.4 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.6 (within 10dB HBW) 50 DC Ground 17.1 20 63 8.9 880 - 960

79 0 M 60 -9 X D Hz

16

DX-790-960-65-17i-0F
Model: A90451702v01

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

17

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-17i-3F
Model: A90451705v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 12.9 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 19 67 9.8 790 - 960 790 - 862 824 - 894 +45 , -45 3, Fixed 16.7 19 65 9.4 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.6 (within 10dB HBW) 50 DC Ground 17.1 19 63 8.9 880 - 960

79 0 M 60 -9 X D Hz

18

DX-790-960-65-17i-3F
Model: A90451705v01

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

19

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-17i-6F
Model: A90451709

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 12.9 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 19 67 9.8 790 - 960 790 - 862 824 - 894 +45 , -45 6, Fixed 16.7 19 65 9.4 < 1.4 30 Typ. 30 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.1 18 63 8.9 880 - 960

79 0 M 60 -9 X D Hz

20

DX-790-960-65-17i-6F
Model: A90451709

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

21

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-18i-0F
Model: A90451802v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 16.3 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.5 21 67 7.8 790 - 960 790 - 862 824 - 894 +45 , -45 0, Fixed 17.7 21 65 7.5 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.5 Avg. 0.5 (within 10dB HBW) 50 DC Ground 18.0 21 63 7.1 880 - 960

79 0 M 60 -9 X D Hz

22

DX-790-960-65-18i-0F
Model: A90451802v01

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

23

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-18i-3F
Model: A90451805v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 16.3 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.5 20 67 7.8 790 - 960 790 - 862 824 - 894 +45 , -45 3, Fixed 17.7 20 65 7.5 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.5 Avg. 0.5 (within 10dB HBW) 50 DC Ground 18.0 20 63 7.1 880 - 960

79 0 M 60 -9 X D Hz

24

DX-790-960-65-18i-3F
Model: A90451805v01

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

25

-9 DX 60M

Hz

www.huawei.com

DX-1710-2170-90-17i-0F
Model: A19451704

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1306 x 155 x 79 5.4 3.0 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 290 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 335 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 18 86 7.0 1710 - 2170 1710 - 1880 1850 - 1990 +45 , -45 0, Fixed 16.7 20 85 6.7 < 1.4 30 25 Typ. 20 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.1 20 84 6.4 1920 - 2170

17 10

0M 17 -2 X D Hz

26

DX-1710-2170-90-17i-0F
Model: A19451704

80

Unit: mm

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2170 MHz

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

27

-2 DX 170

Hz

www.huawei.com

DX-1710-2170-90-17i-3F
Model: A19451705

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1306 x 155 x 79 5.4 3.0 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 290 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 335 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 18 86 7.0 1710 - 2170 1710 - 1880 1850 - 1990 +45 , -45 3, Fixed 16.7 20 85 6.7 < 1.4 30 25 Typ. 20 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.0 20 84 6.4 1920 - 2170

17 10

0M 17 -2 X D Hz

28

DX-1710-2170-90-17i-3F
Model: A19451705

80

Unit: mm

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2170 MHz

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

29

-2 DX 170

Hz

www.huawei.com

DX-1710-2170-65-18i-2F
Model: A19451801

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 17.6 Typ. 20 68 7.3 1710 - 1880 1850 - 1990 +45 , -45 1.4 17.8 Typ. 20 65 18.0 Typ. 20 62 1920 - 2170

6.8 6.2 30 Typ. 30 Typ. 21 Typ. 10 2 -150 (2 x 43 dBm carrier) 200 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1306 x 155 x 79 5.5 3.0 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 150 (v=150 km/h) Lateral: 110 (v=150 km/h) Rear side: 225 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17 10

0M 17 -2 X D Hz

30

DX-1710-2170-33-21i-0F
Model: A19452102

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 20.3 18 35 7.2 1710 - 1880 1850 - 1990 +45 , -45 1.45 20.7 18 33 20.9 18 31 1920 - 2170

6.6 6.2 30 Typ. 28 Typ. 20 0 -150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1318 x 289 x 85 10.4 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 285 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

31

-2 DX 170

Hz

www.huawei.com

DX-1710-2170-65-21i-0F
Model: A19452100

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () First null_ll below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 20.0 18 66 4.2 1710 - 1880 1850 - 1990 +45 , -45 1.45 20.5 18 63 20.8 18 60 1920 - 2170

3.7 3.3 20 30 30 17 10 0 -150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2170 x 155 x 79 9.1 3 0-8 50 - 115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17 10

0M 17 -2 X D Hz

32

DX-1710-2170-65-21i-2F
Model: A19452103

Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () First null_ll below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 20.0 16 66 4.5 1710 - 1880 1850 - 1990 +45 , -45 1.45 20.5 16 63 20.8 16 60 1920 - 2170

4.0 3.6 20 30 30 17 10 0 -150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2170 x 155 x 79 9.1 3 0-8 50 - 115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

33

-2 DX 170

Hz

www.huawei.com

DX-1710-2200-65-15.5i-3F
Model: A19451601

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 702 x 155 x 89 3.6 2.6 0 - 20 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 15.3 18 67 13.3 15.7 20 64 12.5 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1.7 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 3, Fixed 16.2 20 61 11.8 16.0 20 60 11.3 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

34

DX-1710-2200-65-15.5i-3F
Model: A19451601

91

Unit: mm

1710 - 2200 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

35

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-15.5i-6F
Model: A19451602

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 702 x 155 x 89 3.6 2.6 0 - 20 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 15.2 18 67 13.3 15.6 20 64 12.5 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.8 Avg. 2.0 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 6, Fixed 16.1 20 61 11.8 16.0 20 60 11.3 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

36

DX-1710-2200-65-15.5i-6F
Model: A19451602

91

Unit: mm

1710 - 2200 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

37

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-18i-0F
Model: A19451800v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 5.5 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.6 18 67 7.0 18.0 19 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.2 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 0, Fixed 18.3 19 62 6.4 18.3 19 60 6.0 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

38

DX-1710-2200-65-18i-0F
Model: A19451800v01

91

Unit: mm

1710 - 2200 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

39

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-18i-3F
Model: A19451810v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 5.5 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.7 19 67 7.0 18.1 19 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.5 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 3, Fixed 18.4 19 62 6.4 18.2 19 60 6.0 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

40

DX-1710-2200-65-18i-3F
Model: A19451810v01

Unit: mm 91

1710 - 2200 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

41

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-18i-6F
Model: A19451802v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 5.5 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.7 18 67 7.0 18.1 20 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 6, Fixed 18.4 20 62 6.4 18.2 20 60 6.0 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

42

DX-1710-2200-65-18i-6F
Model: A19451802v01

91

Unit: mm

1710 - 2200 X +45 -45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

43

-2 DX 200

Hz

www.huawei.com

DX-806-960-90-17i-M
Model: A90451704

Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60 () (dBi) () (dBi) 806 - 866 1.45 2 16.1 2 18 6 16.2 6 18 88 8.2 9.5 16.0 9.5 18 2 16.3 2 18 824 - 894 +45 , -45 1.4 6 16.4 6 18 86 9.5 16.2 9.5 18 2 16.4 2 18 880 - 960 1.4 6 16.5 6 18 85 9.5 16.3 9.5 18

7.6 7.4 30 25 20 Typ. 13 2 - 9.5 -150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2526 x 268 x 125 18.6 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 510 (v=150 km/h) Lateral: 340 (v=150 km/h) Rear side: 750 (v=150 km/h) 200 2 x 7/16 DIN Female

806 - 960 X +45 -45

7/16 (F)

7/16 (F)

806 - 866 MHz

824 - 894 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

80 6

M 60 -9 X D Hz

44

DX-790-960-65-15i-M
Model: A79451500v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1356 x 259 x 135 11.2 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 14.6 0 18 7 14.5 7 17 67 15.2 14 14.2 14 16 0 14.9 0 18 790 - 960 790 - 862 824 - 894 +45 , -45 0 - 14 , continuously adjustable 7 14.8 7 17 65 14.5 < 1.4 30 Typ. 28 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 3 Avg. 1 (within 10dB HBW) 50 DC Ground 14 14.6 14 16 0 15.1 0 18 7 14.8 7 17 63 13.6 14 14.7 14 16 880 - 960

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

45

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-16.5i-M
Model: A79451600v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 14.2 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 16.2 0 20 6 16.3 6 20 67 10.5 12 16.0 12 16 790 - 960 790 - 862 824 - 894 +45 , -45 0 - 12 , continuously adjustable 0 16.3 0 20 6 16.5 6 18 65 10.1 < 1.5 30 Typ. 28 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1 (within 10dB HBW) 50 DC Ground 12 16.3 12 16 0 16.6 0 20 6 16.8 6 17 63 9.5 12 16.4 12 16 880 - 960

79 0 M 60 -9 X D Hz

46

DX-790-960-65-16.5i-M
Model: A79451600v01

56

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

47

-9 DX 60M

Hz

www.huawei.com

DX-790-960-65-17.5i-M
Model: A79451700v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 17.5 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 17.0 0 20 5 17.1 5 18 66 8.3 10 16.7 10 18 790 - 960 790 - 862 824 - 894 +45 , -45 0 - 10, continuously adjustable 0 17.1 0 20 5 17.3 5 20 66 7.9 < 1.5 30 Typ. 30 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1 Avg. 1 (within 10dB HBW) 50 DC Ground 10 17.0 10 18 0 17.3 0 20 5 17.6 5 18 64 7.3 10 17.1 10 18 880 - 960

79 0 M 60 -9 X D Hz

48

DX-790-960-65-17.5i-M
Model: A79451700v01

56

70

Unit: mm

790 - 960 X +45 -45

7/16 (F)

7/16 (F)

790 - 960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

79

49

-9 DX 60M

Hz

www.huawei.com

DX-698-960-65-15i-M
Model: A70451501
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1356 x 259 x 135 11.2 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 14.0 0 17 7 14.1 7 16 68 17.2 14 14.0 14 15 0 14.4 0 17 7 14.4 7 16 67 16.0 < 1.5 30 > 25 Typ. 20 Typ. 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 2.0 Typ. 2.0 (within 10dB HBW) 50 DC Ground 698 - 960 698 - 806 790 - 862 +45 , -45 0 - 14 , continuously adjustable 14 14.3 14 15 0 14.9 0 17 7 14.7 7 16 65 15.3 14 14.4 14 15 0 15.1 0 17 7 14.9 7 16 63 14.5 14 14.5 14 15 824 - 894 880 - 960

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

69 8

M 60 -9 X D Hz

50

DX-698-960-65-16.5i-M
Model: A70451600
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 14.5 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 15.5 0 17 6 15.6 6 16 68 11.5 12 15.3 12 15 0 16.0 0 17 6 16.1 6 16 67 10.5 < 1.5 30 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 2.0 Typ. 2.0 (within 10dB HBW) 50 DC Ground 698 - 960 698 - 806 790 - 862 +45 , -45 0 - 12 , continuously adjustable 12 15.8 12 15 0 16.3 0 17 6 16.4 6 16 65 10.1 12 16.0 12 15 0 16.4 0 17 6 16.6 6 16 63 9.5 12 16.1 12 15 824 - 894 880 - 960

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

69

51

-9 DX 60M

Hz

www.huawei.com

DX-698-960-65-17.5i-M
Model: A70451700
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 17.5 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 16.3 0 17 5 16.4 5 16 68 9.0 10 16.0 10 15 0 16.8 0 17 5 16.9 5 16 67 8.3 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 2.0 Typ. 2.0 (within 10dB HBW) 50 DC Ground 698 - 960 698 - 806 790 - 862 +45 , -45 0 - 10 , continuously adjustable 10 16.5 10 15 0 17.1 0 17 5 17.2 5 16 65 7.9 10 16.8 10 15 0 17.1 0 17 5 17.4 5 16 63 7.3 10 16.9 10 15 824 - 894 880 - 960

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

69 8

M 60 -9 X D Hz

52

DX-698-960-90-15i-M
Model: A70451500
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 12.5 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 14.4 0 17 6 14.5 6 16 87 11.5 12 14.0 12 15 0 14.9 0 17 6 15.0 6 16 86 10.5 < 1.5 30 Typ. 26 Typ. 17 Typ. 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground 698 - 960 698 - 806 790 - 862 +45 , -45 0 - 12 , continuously adjustable 12 14.5 12 15 0 15.0 0 17 6 15.1 6 16 85 10.1 12 14.5 12 15 0 14.9 0 17 6 15.2 6 16 84 9.5 12 14.6 12 15 824 - 894 880 - 960

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

69

53

-9 DX 60M

Hz

www.huawei.com

DX-1710-2170-90-17i-M
Model: A19451703

Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding () (dBi) () (dBi) 2 16.3 2 18 6 16.5 6 17 84 7.5 10 16.2 10 16 2 16.5 2 18 1710 - 1880 1850 - 1990 +45 , -45 1.4 6 16.7 6 17 88 10 16.4 10 16 2 16.7 2 18 6 17.0 6 17 86 10 16.5 10 16 1920 - 2170

6.5 6.0 30 25 18 10 2 - 10 -150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1306 x 155 x 79 6.5 3.0 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 150 (v=150 km/h) Lateral: 110 (v=150 km/h) Rear side: 225 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17 10

0M 17 -2 X D Hz

54

DX-1710-2170-33-21i-M
Model: A19452101

Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding () (dBi) () (dBi) 2 20.0 2 18 6 20.1 6 17 35 7.2 10 20.1 10 16 1710 - 1880 1850 - 1990 +45 , -45 1.45 2 20.3 2 18 6 20.5 6 17 33 10 20.1 10 16 2 20.7 2 18 6 20.5 6 17 31 10 19.8 10 16 1920 - 2170

6.6 6.2 30 Typ. 28 Typ. 20 0 - 10 -150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1318 x 289 x 85 11.4 4.6 0-8 50 - 115 Fiberglass -55 .. +65 Frontal: 285 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

1710 - 2170 X +45 -45

7/16 (F)

7/16 (F)

1710 - 1880 MHz

1850 - 1990 MHz

1920 - 2170 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

55

-2 DX 170

Hz

www.huawei.com

DX-1710-2200-65-15.5i-M
Model: A19451505

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 702 x 155 x 89 4.3 2.6 0 - 20 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 15.4 0 20 6 15.4 6 17 67 13.9 12 15.1 12 15 0 15.6 0 20 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 0 - 12 , continuously adjustable 6 15.5 6 18 64 13.0 < 1.5 30 Typ. 29 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1.5 (within 10dB HBW) 50 DC Ground 12 15.1 12 15 0 15.8 0 20 6 15.7 6 18 61 12.6 12 15.4 12 17 0 15.8 0 16 6 15.7 6 15 60 11.5 12 15.3 12 15 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

56

DX-1710-2200-65-15.5i-M
Model: A19451505

34

46

34

Unit: mm

1710 - 2200 X +45

-45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

57

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-18i-M
Model: A19451811

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 6.2 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 17.2 0 20 5 17.6 5 16 67 7.5 10 17.4 10 18 0 17.7 0 20 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 0 - 10, continuously adjustable 5 18.0 5 20 64 7.0 < 1.5 30 Typ. 30 Typ. 22 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.2 (within 10dB HBW) 50 DC Ground 10 17.7 10 18 0 18.0 0 18 5 18.1 5 17 61 6.7 10 17.9 10 16 0 18.0 0 18 5 18.2 5 18 60 6.2 10 17.9 10 16 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

58

DX-1710-2200-65-18i-M
Model: A19451811

34

46

34

Unit: mm

1710 - 2200 X +45

-45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

59

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-18i-M-R
Model: A194518R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60 0 17.2 0 18 5 17.4 5 15 67 7.5 10 17.1 10 16 0 17.5 0 18 5 17.8 5 17 64 7.0 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3 Typ. 3 (within 10dB HBW) 50 DC Ground 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 0 - 10 , continuously adjustable 10 17.4 10 16 0 17.8 0 18 5 18.1 5 17 61 6.7 10 17.6 10 16 0 17.4 0 18 5 17.6 5 17 60 6.2 10 17.5 10 16 1920 - 2170 2170 - 2200

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1315 x 155 x 89 7 2.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 150 (at 150 km/h) Lateral: 110 (at 150 km/h) Rear side: 225 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

17 10 0M 20 -2 X D Hz

60

DX-1710-2200-65-18i-M-R
Model: A194518R0

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15

Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

61

-2 DX 200

Hz

www.huawei.com

DX-1710-2200-65-19.5i-M
Model: A19451902

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1954 x 155 x 89 8.4 2.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 505 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 575 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 18.6 0 20 3 18.7 3 17 67 5.0 6 18.5 6 16 0 19.0 0 20 1710 - 2200 1710 - 1880 1850 - 1990 +45 , -45 0 - 6, continuously adjustable 3 19.1 3 17 64 4.7 < 1.5 30 Typ. 32 Typ. 25 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground 6 18.9 6 16 0 19.2 0 20 3 19.4 3 18 62 4.5 6 19.1 6 17 0 19.4 0 20 3 19.5 3 18 60 4.1 6 18.8 6 17 1920 - 2170 2170 - 2200

17 10

0M 20 -2 X D Hz

62

DX-1710-2200-65-19.5i-M
Model: A19451902

34

Unit: mm 46 34

1710 - 2200 X +45

-45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

63

-2 DX 200

Hz

www.huawei.com

DX-1710-2690-65-16i-M
Model: A26451500
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

1710 - 2690 1710 - 1990 1920 - 2200 2200 - 2490 +45 , -45 0 - 14 , continuously adjustable 0 14.8 0 17 16 7 15.0 7 16 15 67 12 14 14.5 14 15 15 0 15.3 0 17 16 7 15.5 7 16 15 65 11 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties 14 15.0 14 15 15 0 15.8 0 17 16 7 16.0 7 16 16 63 10 14 15.5 14 15 15 0 15.8 0 17 16 7 16.0 7 16 15 60 9 14 15.5 14 15 15 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

790 x 155 x 109 5.5 2.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 170 (at 150 km/h) Lateral: 85 (at 150 km/h) Rear side: 195 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

17 10

0M 69 -2 X D Hz

64

DX-1710-2690-65-18i-M
Model: A26451800v01
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

1710 - 2690 1710 - 1990 1920 - 2200 2200 - 2490 +45 , -45 0 - 12 , continuously adjustable 0 17.3 0 18 16 6 17.4 6 17 16 66 6.7 12 17.2 12 16 15 0 17.6 0 18 16 6 17.8 6 17 16 63 6.1 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground 12 17.5 12 16 15 0 17.7 0 18 16 6 18.0 6 17 16 60 5.5 12 17.5 12 16 15 0 17.8 0 17 15 6 18.0 6 17 16 60 4.9 12 17.3 12 16 15 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1365 x 155 x 109 6.7 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 215 (at 150 km/h) Lateral: 200 (at 150 km/h) Rear side: 370 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

17

10

65

-2 DX 690

Hz

DX-1710-2690-65-18i-M
Model: A26451800v01
Preliminary Issue

1710 - 2200 X +45

-45

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT

2200 - 2690 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

17 10

0M 69 -2 X D Hz

66

DX-1710-2690-65-18i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m


Model: A264518R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

1710 - 2690 1710 - 1990 1920 - 2200 +45 , -45 0 - 12, continuously adjustable 0 17.3 0 18 16 6 17.4 6 17 16 66 6.7 12 17.2 12 16 15 0 17.6 0 18 16 6 17.8 6 17 16 63 6.1 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground 12 17.5 12 16 15 0 17.7 0 18 16 6 18.0 6 17 16 60 5.5 12 17.5 12 16 15 0 17.8 0 17 15 6 18.0 6 17 16 60 4.9 12 17.3 12 16 15 2200 - 2490 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1365 x 155 x 109 7.6 2.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 210 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 370 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

17

10

67

-2 DX 690

Hz

DX-1710-2690-65-18i-M-R EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m


Model: A264518R0
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

17 10

0M 69 -2 X D Hz

68

DX-1710-2690-65-19.5i-M
Model: A26451900v01
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1690 x 155 x 109 9.0 2.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 275 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 475 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 18.0 0 17 4 18.1 4 17 69 5.2 8 18.0 8 15 0 18.3 0 17 4 18.6 4 17 65 4.8 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3.0 Avg. 1 .0 (within 10dB HBW) 50 DC Ground 1710 - 2690 1710 - 1990 1920 - 2200 2200 - 2490 +45 , -45 0 - 8 , continuously adjustable 8 18.5 8 16 0 19.0 0 17 4 19.2 4 17 62 4.4 8 19.0 8 16 0 19.0 0 17 4 19.3 4 17 60 3.9 8 19.0 8 16 2490 - 2690

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

17

10

69

-2 DX 690

Hz

www.huawei.com

DXX-790-862/880-960-65/65-14.5i/15i-M/M-R
Model: ADU4515R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
0 79

790 - 862 +45 , -45 0 - 12, continuously adjustable 0 14.3 0 16 7 14.1 7 15 66 16.6 < 1.5 30 25 Typ. 20 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 14 13.7 14 15

880 - 960

0 - 14, continuously adjustable 0 14.7 0 16 7 14.5 7 15 61 14.4 14 14.2 14 15

0 60

Typ. 20 Typ. 10

1536 x 349 x 166 19 4.6 0 - 16 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 460 (at 150 km/h) Lateral: 215 (at 150 km/h) Rear side: 670 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Hz M 60 -9 80 /8 X 62 DX -8

70

DXX-790-862/880-960-65/65-14.5i/15i-M/M-R
Model: ADU4515R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15

Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-8 62 /8 8 DX 0 96 X 0M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

79 0

71

DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.0m


Model: ADU4516R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 862 +45 , -45 0 - 12 , continuously adjustable 0 15.6 0 20 16 6 16.0 6 20 16 69 10.5 < 1.5 12 15.7 12 17 15 0 16.3 0 20 16

880 - 960

6 16.8 6 20 15 65 9.4

12 16.3 12 17 15

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Intra-system: 30 Inter-system (790 - 862 // 880 - 960 MHz): 30 > 25 Typ. 23 10 500 (at 50 ambient temperature) -150 (2 x 43 dBm carrier) Typ. 2.0 Avg. 1.0 (within 10dB HBW) 50 DC Ground Typ. 28 Typ. 25 10

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz M 60 -9 80 /8 X 62 DX -8

1999 x 259 x 135 21.5 5.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 685 (at 150 km/h) Lateral: 360 (at 150 km/h) Rear side: 910 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

72

DXX-790-862/880-960-65/65-16i/16.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.0m


Model: ADU4516R0

RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxx.r

b HWMxxxrr

r - Red

790 - 862 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-8 62 /8 8 DX 0 96 X 0M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

73

DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.6m


Model: ADU4517R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 862 +45 , -45 0 - 10 , continuously adjustable 0 16.4 0 18 16 5 16.8 5 18 16 68 8.3 < 1.5 10 16.4 10 17 15 0 17.1 0 18 16

880 - 960

5 17.5 5 18 16 65 7.2

10 17.2 10 18 16

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Intra-system: 30 Inter-system (790 - 862 // 880 - 960 MHz): 30 Typ. 28 Typ. 23 10 500 (at 50 ambient temperature) -150 (2 x 43 dBm carrier) Typ. 1.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground Typ. 30 Typ. 25 10

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz M 60 -9 80 /8 X 62 DX -8

2538 x 259 x 135 25.5 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

74

DXX-790-862/880-960-65/65-17i/17.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.6m


Model: ADU4517R0

RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxx.r

b HWMxxxrr

r - Red

790 - 862 MHz

880 - 960 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-8 62 /8 8 DX 0 96 X 0M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

75

DXX-790-960/1710-2180-65/65-15i/17.5i-M/M
Model: ADU451503

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 14, continuously adjustable 7 14 0 7 14 0 7 14 0 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10

14.6 14.5 14.3 15.0 14.7 14.5 15.1 15.0 14.5 16.7 16.8 16.6 17.0 17.3 16.6 17.5 17.6 16.7 7 18 69 15.7 14 17 0 18 7 18 66 15.0 14 17 0 17 7 15 64 14.0 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 14 15 0 19 5 17 65 7.5 10 17 0 19 5 16 63 7.1 10 17 0 19 5 16 60 6.6 10 17

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

-153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

1360 x 259 x 135 13.7 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

76

DXX-790-960/1710-2180-65/65-15i/17.5i-M/M
Model: ADU451503

56

55

70

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2180 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

77

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M
Model: ADU451602v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 12, continuously adjustable 6 12 0 6 12 0 6 12 0 4 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 8, continuously adjustable 8 0 4 8 0 4 8

15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3 6 17 69 10.6 12 15 0 20 6 18 66 10.2 12 15 0 17 6 18 64 9.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 12 15 0 20 4 18 65 5.2 8 18 0 18 4 17 63 5.0 8 15 0 18 4 15 60 4.7 8 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 20 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

-153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

1936 x 259 x 135 17.3 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

78

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M
Model: ADU451602v01

56

55

70

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2180 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

79

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m


Model: ADU4518R3

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 12 , continuously adjustable 6 12 0 6 12 0 6 12 0 4 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 8 , continuously adjustable 8 0 4 8 0 4 8

15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3 6 17 69 10.6 12 15 0 20 6 18 66 10.2 12 15 0 17 6 18 64 9.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 12 15 0 20 4 18 65 5.2 8 18 0 18 4 17 63 5.0 8 15 0 18 4 15 60 4.7 8 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 20 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

-153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

1936 x 259 x 135 18.3 4.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

80

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m


Model: ADU4518R3

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxxr

b HWMxxxb

r - Red

b - Blue

790 - 960 MHz

1710 - 2180 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

81

DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M
Model: ADU451807v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 4 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 8, continuously adjustable 8 0 4 8 0 4 8

16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0 5 19 69 8.4 10 18 0 19 5 19 66 8.0 10 18 0 19 5 18 65 7.5 < 1.5 Intra-system: 30 Inter-system: 40 Typ. 28 Typ. 30 Typ. 10 500 (at 50 ambient temperature) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 10 17 0 18 4 16 64 5.2 8 18 0 20 4 16 62 4.9 8 18 0 20 4 16 60 4.6 8 18

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

-153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

2535 x 259 x 135 21 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

82

DXX-790-960/1710-2180-65/65-17i/18.5i-M/M
Model: ADU451807v01

56

55

70

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2180 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

83

DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m


Model: ADU4518R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10 , continuously adjustable 5 10 0 5 10 0 5 10 0 4 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 8 , continuously adjustable 8 0 4 8 0 4 8

16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0 5 19 69 8.4 10 18 0 19 5 19 66 8.0 10 18 0 19 5 18 65 7.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 30 Typ. 10 500 (at 50 ambient temperature) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 10 17 0 18 4 16 64 5.2 8 18 0 20 4 16 62 4.9 8 18 0 20 4 16 60 4.6 8 18

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

-153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

2535 x 259 x 135 22.2 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

84

DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m


Model: ADU4518R0

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxxr

b HWMxxxb

r - Red

b - Blue

790 - 960 MHz

1710 - 2180 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

85

DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-C
Model: ADU4517C0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 14 , continuously adjustable 7 7 18 69 15.7 14 14 17 0 0 18 7 7 18 66 15.0 14 14 17 0 0 17 7 7 15 64 14.0 < 1.5 Intra-system: 30 Typ. 28 Typ. 25 Typ. 10 250 (at 50 ambient temperature) 450 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1360 x 259 x 135 13.7 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom Typ. 28 Typ. 20 Typ. 10 200 (at 50 ambient temperature) 14 14 15 0 0 19 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10 , continuously adjustable 5 5 17 65 7.5 10 10 17 0 0 19 5 5 16 63 7.1 10 10 17 0 0 19 5 5 16 60 6.6 10 10 17 1710 - 2180 1850 - 1990 1920 - 2180

14.6 14.5 14.3 15.0 14.7 14.5 15.1 15.0 14.5 16.7 16.8 16.6 17.0 17.3 16.6 17.5 17.6 16.7

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Total power per combined input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


0 79

Issue: 2013-01-08

Hz 0M 18 -2 0 71 X /1 DX 60 -9

86

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-C
Model: ADU4518C1
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 12 , continuously adjustable 6 6 17 69 10.6 12 12 15 0 0 20 6 6 18 66 10.2 12 12 15 0 0 17 6 6 18 64 9.5 < 1.5 Intra-system: 30 Typ. 28 Typ. 25 Typ. 10 250 (at 50 ambient temperature) 450 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 17.3 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom Typ. 30 Typ. 20 Typ. 10 200 (at 50 ambient temperature) 12 12 15 0 0 20 4 4 18 65 5.2 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 8 , continuously adjustable 8 8 18 0 0 18 4 4 17 63 5.0 8 8 15 0 0 18 4 4 15 60 4.7 8 8 15 1710 - 2180 1850 - 1990 1920 - 2180

15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 20 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Total power per combined input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

79 0

87

DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-C
Model: ADU4518C0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 4 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 1710 - 2180 1850 - 1990 1920 - 2180

+45 , -45 0 - 8, continuously adjustable 8 0 4 8 0 4 8

16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0 5 19 69 8.4 10 18 0 19 5 19 66 8.0 10 18 0 19 5 18 65 7.5 < 1.5 Intra-system: 30 Typ. 28 Typ. 30 Typ. 10 250 (at 50 ambient temperature) Typ. 29 Typ. 20 Typ. 10 200 (at 50 ambient temperature) 10 17 0 18 4 16 64 5.2 8 18 0 20 4 16 62 4.9 8 18 0 20 4 16 60 4.6 8 18

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Total power per combined input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

450 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

2535 x 259 x 135 20.8 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

88

DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-C
Model: ADU4518C0

54

70

70

Unit: mm

790 - 960 X +45 C -45 +45

1710 - 2180 X -45 C

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

89

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-ESLS
Model: ADU451820

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 12, continuously adjustable 0 0 20 15 6 6 17 16 69 10.6 12 12 15 15 0 0 20 15 6 6 18 16 66 10.2 12 12 15 15 0 0 17 15 6 6 18 16 64 9.5 < 1.5 12 12 15 15 0 0 20 16 4 4 18 16 65 5.2

1710 - 2180 1850 - 1990 1920 - 2180

0 - 8, continuously adjustable 8 8 18 15 0 0 18 16 4 4 17 16 63 5.0 8 8 15 15 0 0 18 16 4 4 15 16 60 4.7 8 8 15 15

15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.3 18.1 18.2 18.5 18.1 18.3 18.5 18.1

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties -153 (2 x 43 dBm carrier) Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature)

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

1936 x 259 x 135 18.1 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

90

DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-ESLS
Model: ADU451820

56

55

70

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2180 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

91

DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-ESLS
Model: ADU451821

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10, continuously adjustable 0 0 19 15 5 5 19 16 69 8.4 10 10 18 15 0 0 19 15 5 5 19 16 66 8.0 10 10 18 15 0 0 19 15 5 5 18 16 65 7.5 < 1.5 10 10 17 15 0 0 18 16 4 4 16 16 64 5.2

1710 - 2180 1850 - 1990 1920 - 2180

0 - 8, continuously adjustable 8 8 18 15 0 0 20 16 4 4 16 16 62 4.9 8 8 18 15 0 0 20 16 4 4 16 16 60 4.6 8 8 18 15

16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.5 18.2 18.3 18.5 18.0

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 30 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground Mechanical Properties -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature)

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0 79 Hz 0M 18 -2 0 71 X /1 DX 60 -9

2535 x 259 x 135 21.6 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

92

DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-ESLS
Model: ADU451821

56

55

70

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2180 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2180 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
-9 60 /1 71 DX 0 21 X 80 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

79 0

93

DXX-790-960/1710-2690-65/65-15i/17.5i-M/M
Model: ADU451716
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 14 , continuously adjustable 7 7 15 69 16.6 14 14 15 0 0 16 7 7 15 66 15.5 14 14 15 0 0 16 7 7 15 64 14.4 < 1.5 Intra-system: 28 Inter-system: 40 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1450 x 298 x 148 17 4.6 0 - 14 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 375 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 595 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) 14 14 15 0 0 16 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10 , continuously adjustable 5 5 16 64 6.8 10 10 15 0 0 16 5 5 16 62 6.4 10 10 15 0 0 16 5 5 16 60 5.9 10 10 15 1710 - 2690 1850 - 1990 1920 - 2180

14.5 14.3 14 14.7 14.5 14.1 15.0 14.9 14.4 16.6 16.8 16.2 16.9 17.0 16.2 17.0 17.2 16.5

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 16 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


0 79

Issue: 2013-01-08

Hz 0M 69 -2 0 71 X /1 DX 60 -9

94

DXX-790-960/1710-2690-65/65-16i/18.5i-M/M
Model: ADU451604

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 +45 , -45 0 - 10, continuously adjustable 0 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 0 4 4 8 8

1710 - 2690 1710 - 1880 1850 - 1990 1920 - 2170 2490 - 2690 0 - 8, continuously adjustable 0 0 4 4 8 8 0 0 4 4 8 8 0 0 4 4 8 8

16.0 16.0 15.5 16.1 16.1 15.6 16.2 16.2 15.7 17.9 18.0 17.7 18.2 18.3 18.1 18.4 18.5 18.2 18.4 18.5 18.2

18 18 18 18 18 18 18 18 18 18 18 17 18 17 17 18 17 17 18 18 17 16 16 15 16 16 15 16 16 15 15 16 15 15 16 15 15 16 15 15 15 15 66 9.8 64 9.5 Intra-system: 30 Typ. 28 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 63 8.9 64 5.4 < 1.5 Intra-system: 28 Typ. 30 Typ. 20 Typ. 10 -153 (2 x 43 dBm carrier) Typ. 2.5 Avg. 1.5 (within 10dB HBW) 50 DC Ground Mechanical Properties Typ. 20 Typ. 8 Inter-system (790 - 960 // 1710 - 2690 MHz): 30 62 5.1 60 4.9 61 3.9

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

250 (at 50 ambient temperature)

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

2020 x 298 x 150 21.2 5.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 825 (at 150 km/h) Lateral: 355 (at 150 km/h) Rear side: 990 (at 150 km/h) 150 200 4 x 7/16 DIN Female
-9 60 /1 71 DX 0 26 X 90 M Hz 79 0

Bottom

95

DXX-790-960/1710-2690-65/65-16i/18.5i-M/M
Model: ADU451604

60

59

112

Unit: mm

790 - 960 X +45 -45 +45

1710 - 2690 X -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2690 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


0 79

Issue: 2012-10-26

Hz 0M 69 -2 0 71 X /1 DX 60 -9

96

DXX-790-960/1710-2690-65/65-17i/18.5i-M/M
Model: ADU451712
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 +45 , -45 0 - 10, continuously adjustable

1710 - 2690 1710 - 1880 1850 - 1990 1920 - 2170 2490 - 2690 0 - 8, continuously adjustable

0 5 10 0 5 10 0 5 10 0 4 8 0 4 8 0 4 8 0 4 8
16.6 16.8 16.1 16.7 16.9 16.5 16.6 17.0 16.8 17.9 18.0 17.7 18.2 18.3 18.1 18.4 18.5 18.2 18.4 18.5 18.2

0 5 10 0 5 10 0 5 10 0 4 8 0 4 8 0 4 8 0 4 8 18 18 18 18 18 18 18 18 18 18 18 17 18 17 17 18 17 17 18 18 17 16 16 15 16 16 15 16 16 15 15 16 15 15 16 15 15 16 15 15 15 15 67 8.5 65 8.2 Intra-system: 30 Typ. 28 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 64 7.7 64 5.4 < 1.5 Intra-system: 28 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) Typ. 2.5 Avg. 1.5 (within 10dB HBW) 50 DC Ground Mechanical Properties -153 (2 x 43 dBm carrier) Typ. 20 Typ. 8 Inter-system (790 - 960 // 1710 - 2690 MHz): 30 62 5.1 60 4.9 61 3.9

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

2520 x 298 x 150 24.5 5.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 1060 (at 150 km/h) Lateral: 455 (at 150 km/h) Rear side: 1275 (at 150 km/h) 150 200 4 x 7/16 DIN Female
-9 60 /1 71 DX 0 26 X 90 M Hz 79 0

Bottom

97

DXX-790-960/1710-2690-65/65-17i/18.5i-M/M
Model: ADU451712
Preliminary Issue

60

59

112

Unit: mm

790 - 960 X +45

1710 - 2690 X -45

-45

+45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz HINT

1710 - 2690 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


0 79

Issue: 2013-01-08

Hz 0M 69 -2 0 71 X /1 DX 60 -9

98

DXX-1710-2200/1710-2200-65/65-15.5i/15.5i-M/M
Model: ADU451611
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 0 15.2 0 17 6 15.2 6 16 67 13.9 12 15.0 12 15 0 15.4 0 17 6 15.3 6 16 64 13.0 < 1.5 30 Typ. 28 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -150 (2 x 43 dBm carrier) Avg.2.0 Avg.2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 701 x 323 x 89 9 4.6 0 - 20 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 285 (at 150 km/h) Lateral: 50 (at 150 km/h) Rear side: 320 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom 2 x (1710 - 2200) 1710 - 1880 1850 - 1990 +45 , -45 0 - 12 , continuously adjustable 12 15.0 12 15 0 15.5 0 17 6 15.4 6 16 61 12.6 12 15.2 12 15 0 15.5 0 16 6 15.4 6 15 60 11.5 12 15.0 12 15 1920 - 2170 2170 - 2200

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
22 00 M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

17 10

99

-2 20 0/ 17 DX 10 X

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60 0 17.0 0 18 5 17.4 5 17 67 7.5 10 17.1 10 17 0 17.3 0 19 2 x (1710 - 2200) 1710 - 1880 1850 - 1990 +45 , -45 0 - 10, continuously adjustable 5 17.7 5 18 64 7.0 < 1.5 30 Typ. 28 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2 Avg. 1.5 (within 10dB HBW) 50 DC Ground 10 17.4 10 18 0 17.6 0 19 5 18.0 5 18 61 6.6 10 17.4 10 17 0 17.5 0 19 5 18.0 5 18 60 6.2 10 17.4 10 17 1920 - 2170 2170 - 2200

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
10 17

1311 x 323 x 89 12.8 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 565 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 640 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Connector position

Hz 0M 20 -2 10 17 X 0/ DX 20 -2

0 10

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819

43

36

59

31

L - Left Column

R - Right Column

Unit: mm

1710 - 2200 X +45 +45

1710 - 2200 X

-45

-45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
22 00 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

10 1

17 10

-2 20 0/ 17 DX 10 X

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R1

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60 0 17.0 0 18 5 17.4 5 17 67 7.5 10 17.1 10 17 0 17.3 0 19 2 x (1710 - 2200) 1710 - 1880 1850 - 1990 +45 , -45 0 - 10 , continuously adjustable 5 17.7 5 18 64 7.0 < 1.5 30 Typ. 28 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 1.5 (within 10dB HBW) 50 DC Ground 10 17.4 10 18 0 17.6 0 19 5 18.0 5 18 61 6.6 10 17.4 10 17 0 17.5 0 19 5 18.0 5 18 60 6.2 10 17.4 10 17 1920 - 2170 2170 - 2200

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
10 17

1311 x 323 x 89 13.6 4.6 0 - 16 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 565 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 640 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Connector position

Hz 0M 20 -2 10 17 X 0/ DX 20 -2

2 10

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R1

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxx..b

b HHWMxxxbb

b - Blue

1710 - 2200 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
22 00 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

10 3

17 10

-2 20 0/ 17 DX 10 X

DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
10 17

2 x (1710 - 2200) 1710 - 1880 1850 - 1990 +45 , -45 0 - 6, continuously adjustable 0 18.5 0 20 3 18.7 3 17 67 5.0 6 18.6 6 16 0 18.9 0 20 3 19.1 3 17 65 4.7 < 1.5 30 Typ. 28 Typ. 25 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 6 18.8 6 17 0 19.1 0 20 3 19.4 3 18 62 4.5 6 18.9 6 17 0 19.1 0 20 3 19.3 3 18 60 4.1 6 18.8 6 17 1920 - 2170 2170 - 2200

0 60

1954 x 323 x 89 17.3 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 890 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 1000 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Connector position

Hz 0M 20 -2 10 17 X 0/ DX 20 -2

4 10

DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902

43

36

59

31

L - Left Column

R - Right Column

Unit: mm

1710 - 2200 X +45 +45

1710 - 2200 X

-45

-45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
22 00 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

10 5

17 10

-2 20 0/ 17 DX 10 X

DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R5
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

1710 - 2170 1710 - 1880 1850 - 1990 +45 , -45 0 - 12 , continuously adjustable 0 17.1 0 18 16 6 17.2 6 17 16 66 6.5 12 17.0 12 16 15 0 17.4 0 18 16 6 17.6 6 17 16 64 6.2 < 1.5 Intra-system: 30 Inter-system: 30 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties 12 17.3 12 16 15 0 17.4 0 18 16 6 17.7 6 17 16 61 5.5 12 17.2 12 16 15 1920 - 2170

2490 - 2690

0 17.6 0 17 15

6 17.8 6 17 16 60 4.7

12 17.1 12 16 15

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
10 17

1445 x 155 x 109 19.2 2.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 230 (at 150 km/h) Lateral: 215 (at 150 km/h) Rear side: 395 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Connector position

Hz 0M 69 -2 90 24 X 0/ DX 17 -2

6 10

DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R5
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
26 90 M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

10 7

17 10

-2 17 0/ 24 DX 90 X

DXX-1710-2690/1710-2690-65/65-16i/16i-M/M
Model: ADU451507
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

2 x (1710 - 2690) 1710 - 1990 1920 - 2200 +45 , -45 0 - 14 , continuously adjustable 0 14.8 0 17 16 7 14.8 7 16 15 67 12 14 14.3 14 15 15 0 15.1 0 17 16 7 15.3 7 16 15 65 11 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties 14 14.8 14 15 15 0 15.5 0 17 16 7 15.7 7 16 15 63 10 14 15.2 14 15 15 0 15.5 0 17 16 7 15.7 7 16 15 60 9 14 15.2 14 15 15 2200 - 2490 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

790 x 299x 109 13 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 320 (at 150 km/h) Lateral: 60 (at 150 km/h) Rear side: 365 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

10 17

Hz 0M 69 -2 10 17 X 0/ DX 69 -2

8 10

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

2 x (1710 - 2690) 1710 - 1990 1920 - 2200 +45 , -45 0 - 12, continuously adjustable 0 17.4 0 18 15 6 17.5 6 17 16 66 6.5 12 17.3 12 16 16 0 17.7 0 18 16 6 17.9 6 17 17 64 6.0 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 5.0 Typ. 3.0 (within 10dB HBW) 50 DC Ground Mechanical Properties 12 17.5 12 16 16 0 18.0 0 18 18 6 18.2 6 17 16 62 5.3 12 17.6 12 16 16 0 18.2 0 18 16 6 18.2 6 17 17 60 4.8 12 17.8 12 16 16 2200 - 2490 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

1365 x 299 x 109 12.6 3.7 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 490 (at 150 km/h) Lateral: 100 (at 150 km/h) Rear side: 565 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
26 90 M Hz -2 69 0/ 17 DX 10 X 17 10

10

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816v01

55

58

83

58

Unit: mm

1710 - 2690 X +45

1710 - 2690 X +45

-45

-45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT

2200 - 2690 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

10 17

Hz 0M 69 -2 10 17 X 0/ DX 69 -2

0 11

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R6
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

2 x (1710 - 2690) 1710 - 1990 1920 - 2200 +45 , -45 0 - 12 , continuously adjustable 0 17.3 0 18 16 6 17.4 6 17 16 66 6.7 12 17.2 12 16 15 0 17.6 0 18 16 6 17.8 6 17 16 63 6.1 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties 12 17.5 12 16 15 0 17.7 0 18 16 6 18.0 6 17 16 60 5.5 12 17.5 12 16 15 0 17.8 0 17 15 6 18.0 6 17 16 60 4.9 12 17.3 12 16 15 2200 - 2490 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

1365 x 299 x 109 15.6 4.6 0 - 16 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 490 (at 150 km/h) Lateral: 100 (at 150 km/h) Rear side: 560 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
26 90 M Hz

11 1

17 10

-2 69 0/ 17 DX 10 X

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m


Model: ADU4518R6
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

10 17

Hz 0M 69 -2 10 17 X 0/ DX 69 -2

2 11

DXX-1710-2690/1710-2690-65/65-19.5i/19.5i-M/M
Model: ADU451901v01
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1690 x 299 x 109 18 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 130 (at 150 km/h) Rear side: 715 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom 0 60 0 18.0 0 18 4 18.1 4 17 66 5.2 8 18.0 8 16 0 18.3 0 18 4 18.6 4 17 63 4.8 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 2 x (1710 - 2690) 1710 - 1990 1920 - 2200 2200 - 2490 +45 , -45 0 - 8 , continuously adjustable 8 18.5 8 16 0 19.0 0 18 4 19.2 4 17 60 4.4 8 19.0 8 16 0 19.0 0 17 4 19.3 4 17 60 3.9 8 19.0 8 16 2490 - 2690

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
26 90 M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

11 3

17 10

-2 69 0/ 17 DX 10 X

DXX-2300-2690/2300-2690-65/65-18i/18i-M
Model: A25451805

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 17.0 0 20 5 17.4 5 20 64 7.0 < 1.5 30 Typ. 26 Typ. 20 250 (at 50 ambient temperature) -150 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
00 23

2 x (2300 - 2690) 2300 - 2490 +45 , -45 0 - 10 , continuously adjustable 10 17.3 10 19 0 17.4 0 20 5 17.8 5 18 61 6.4 10 17.0 10 20 2490 - 2690

Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding 0

1060 x 289 x 85 10.2 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 230 (at 150 km/h) Lateral: 100 (at 150 km/h) Rear side: 340 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom

Connector position

Hz 0M 69 -2 00 23 X 0/ DX 69 -2

4 11

DXX-2300-2690/2300-2690-65/65-18i/18i-M
Model: A25451805

52

48

L - Left Column

R - Right Column

Unit: mm

2300 - 2690 X -45

2300 - 2690 X +45

+45

-45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

1710 - 2200 MHz HINT

2200 - 2690 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
26 90 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

11 5

23 00

-2 69 0/ 23 DX 00 X

DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 7 17 69 15.5 14 15 0 19 7 18 68 14.8 14 16 0 19 7 18 67 13.8 < 1.5 Intra-system: 30 Inter-system (790 - 960 / 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 / 1710 - 2180 MHz): 30 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 14, continuously adjustable 7 14 0 7 14 0 7 14 0 14.7 14.8 14.5 15.0 14.8 14.7 15.0 14.8 14.6

2 x (1710 - 2180) 1850 - 1990 1920 - 2180

0 - 14, continuously adjustable 7 14 0 7 14 0 7 14

14.6 14.5 14.3 15.0 14.9 14.5 15.3 15.2 14.7 14.5 14.5 14.0 14.9 14.7 14.1 15.1 15.0 14.3 14 15 0 17 7 17 63 13.6 14 15 0 18 7 18 61 12.8 14 15 0 17 7 17 60 12.1 14 15

Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

1454 x 259 x 135 15.1 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 480 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 635 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

6 11

DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500

61

44

17 56

55 70 T - Top Column B - Bottom Column 1710 - 2180 Bottom X +45 -45

Unit: mm

790 - 960 X +45 -45

1710 - 2180 Top X +45 -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

11 7

DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 6 17 69 10.7 12 15 0 19 6 18 66 10.1 12 16 0 19 6 18 65 9.4 12 15 0 - 12, continuously adjustable 6 12 0 6 12 0 6 12 0 16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6 15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0 16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7 0 17 6 17 64 Bottom: 9.6 Top: 8.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 35 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 12 15 0 18 6 18 62 Bottom: 8.9 Top: 8.0 12 15 0 17 6 17 60 Bottom: 8.3 Top: 7.5 12 15 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 12, continuously adjustable 6 12 0 6 12 0 6 12 2 x (1710 - 2180) 1850 - 1990 1920 - 2180

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2098 x 259 x 135 19.4 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

8 11

DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01

61

44

17 56

55 70 T - Top Column B - Bottom Column 1710 - 2180 Bottom X +45 -45

Unit: mm

790 - 960 X +45 -45

1710 - 2180 Top X +45 -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

11 9

DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m


Model: ATR4516R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 6 17 69 10.7 12 15 0 19 6 18 66 10.1 12 16 0 19 6 18 65 9.4 12 15 0 - 12 , continuously adjustable 6 12 0 6 12 0 6 12 0 16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6 15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0 16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7 0 17 6 17 64 Bottom: 9.6 Top: 8.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 35 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 12 15 0 18 6 18 62 Bottom: 8.9 Top: 8.0 12 15 0 17 6 17 60 Bottom: 8.3 Top: 7.5 12 15 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 12 , continuously adjustable 6 12 0 6 12 0 6 12 2 x (1710 - 2180) 1850 - 1990 1920 - 2180

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2098 x 259 x 135 20.7 5.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

0 12

DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m


Model: ATR4516R0

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxxr

b HWMxxxbT c HWMxxxbbB
r - Red T - Top Column b - Blue B - Bottom Column

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

12 1

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M
Model: ATR451704v01

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 5 16 69 8.4 10 19 0 19 5 17 66 8.0 10 19 0 19 5 17 65 7.5 10 18 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0 17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0 16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9 0 15 5 20 63 Bottom: 7.5 Top: 7.0 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 28 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 10 20 0 15 5 15 62 Bottom: 7.0 Top: 6.5 10 16 0 18 5 17 60 Bottom: 6.6 Top: 6.1 10 15 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 2 x (1710 - 2180) 1850 - 1990 1920 - 2180

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2680 x 259 x 135 23 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

2 12

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M
Model: ATR451704v01

61

44

17 56

55 T - Top Column

70 B - Bottom Column

Unit: mm

790 - 960 X +45 -45

1710 - 2180 Bottom X +45 -45

1710 - 2180 Top X +45 -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

12

DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/ 16.5i-M/M/M-ESLS
Model: ATR451612

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 12, continuously adjustable 6 12 0 6 12 0 6 12 0 16.0 16.0 15.3 16.1 16.1 15.5 16.3 16.2 15.6

2 x (1710 - 2180) 1850 - 1990 1920 - 2180

0 - 12, continuously adjustable 6 12 0 6 12 0 6 12

15.7 15.8 15.4 16.0 16.2 15.6 16.1 16.3 15.8 15.9 16.1 15.5 16.2 16.3 15.6 16.2 16.4 15.6 0 18 15 6 17 16 69 10.7 12 15 15 0 19 15 6 18 16 66 10.1 12 16 15 0 19 15 6 18 16 65 9.4 12 15 15 0 17 16 6 17 16 64 Bottom: 9.6 Top: 8.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 35 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 12 15 15 0 18 16 6 18 16 62 Bottom: 8.9 Top: 8.0 12 15 15 0 17 16 6 17 16 60 Bottom: 8.3 Top: 7.5 12 15 15

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2098 x 259 x 135 20.4 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

4 12

DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/ 16.5i-M/M/M-ESLS
Model: ATR451612

61

44

17 56

55 T - Top Column

70 B - Bottom Column

Unit: mm

790 - 960 X +45 -45

1710 - 2180 Bottom X +45 -45

1710 - 2180 Top X +45 -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

12 5

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/ 17.5i-M/M/M-ESLS
Model: ATR451713

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0

2 x (1710 - 2180) 1850 - 1990 1920 - 2180

0 - 10, continuously adjustable 5 10 0 5 10 0 5 10

17.0 17.0 16.6 17.6 17.4 16.8 17.4 17.4 17.0 16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9 0 19 15 5 16 16 69 8.4 10 19 15 0 19 15 5 17 16 66 8 10 19 15 0 19 15 5 17 16 65 7.5 10 18 15 0 15 16 5 20 16 63 Bottom: 7.5 Top: 7.0 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 28 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 10 20 15 0 15 16 5 15 16 62 Bottom: 7.0 Top: 6.5 10 16 15 0 18 16 5 17 16 60 Bottom: 6.6 Top: 6.1 10 15 15

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2680 x 259 x 135 24.7 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

6 12

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/ 17.5i-M/M/M-ESLS
Model: ATR451713

61

44

17 56

55 T - Top Column

70 B - Bottom Column

Unit: mm

790 - 960 X +45 -45

1710 - 2180 Bottom X +45 -45

1710 - 2180 Top X +45 -45

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

12 7

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m


Model: ATR4517R0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 5 16 69 8.4 10 19 0 19 5 17 66 8.0 10 19 0 19 5 17 65 7.5 10 18 0 - 10 , continuously adjustable 5 10 0 5 10 0 5 10 0 16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0 17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0 16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9 0 15 5 20 63 Bottom: 7.5 Top: 7.0 < 1.5 Intra-system: 30 Inter-system (790 - 960 // 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 // 1710 - 2180 MHz): 40 Typ. 28 Typ. 28 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 10 20 0 15 5 15 62 Bottom: 7.0 Top: 6.5 10 16 0 18 5 17 60 Bottom: 6.6 Top: 6.1 10 15 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1880 +45 , -45 0 - 10 , continuously adjustable 5 10 0 5 10 0 5 10 2 x (1710 - 2180) 1850 - 1990 1920 - 2180

Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 18 -2 z H 0 71 M /1 80 60 21 X - 9 0 - XX 0 1 D 79 17

2680 x 259 x 135 24.6 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 965 (at 150 km/h) Lateral: 440 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

8 12

DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m


Model: ATR4517R0

RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 37 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

Integrated RCU S/N: a HWMxxxr

b HWMxxxbT c HWMxxxbbB
r - Red T - Top Column b - Blue B - Bottom Column

790 - 960 MHz

1710 - 2180 MHz (Bottom)

1710 - 2180 MHz (Top)

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /

Any previous catalogue issues become invalid. Issue: 2012-10-26

12 9

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m


Model: ATR4518R4
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1990 2 x (1710 - 2690) 1920 - 2200 2300 - 2690

+45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10

15.7 15.8 15.4 15.8 15.9 15.5 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2 5 16 66 9.8 10 15 0 16 5 16 63 9.4 10 15 0 16 5 16 60 8.8 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) 10 15 0 17 5 17 65 5.7 10 16 0 17 5 17 62 5.2 10 16 0 16 5 16 60 4.2 10 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 16 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

-153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 69 -2 z H 0 71 M /1 90 60 26 X - 9 0 - XX 0 1 D 79 17

1999 x 349 x 166 25 5.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

0 13

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m


Model: ATR4518R4
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG Lightning protection (kA) 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 4 5 6 7 RS-485B n/c RS-485A DC in/out DC return AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

8 n/c

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE Integrated RCU S/N: a HWMxxxbL b - Blue y - Yellow L - Left array R - Right array

b HWMxxxyL c HWMxxxyyR

790 - 960 MHz HINT

1710 - 2690 MHz (Left)

1710 - 2690 MHz (Right)

Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 269 0 XX 0M 26 Hz 90 /

Any previous catalogue issues become invalid. Issue: 2013-01-08

13 1

DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m


Model: ATR4518R7
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1990 2 x (1710 - 2690) 1920 - 2200 2200 - 2690

+45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10

16.3 16.4 16.2 16.7 16.8 16.4 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2 5 16 67 7.9 10 16 0 17 5 16 65 7.5 10 16 0 17 5 16 64 7.0 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) 10 16 0 17 5 17 66 5.7 10 16 0 17 5 17 62 5.2 10 16 0 16 5 16 60 4.2 10 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

-153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ 69 -2 z H 0 71 M /1 90 60 26 X - 9 0 - XX 0 1 D 79 17

2528 x 349 x 166 27.3 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 920 (at 150 km/h) Lateral: 305 (at 150 km/h) Rear side: 955 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

2 13

DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m


Model: ATR4518R7
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG Lightning protection (kA) 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 4 5 6 7 RS-485B n/c RS-485A DC in/out DC return AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

8 n/c

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE Integrated RCU S/N: a HWMxxxbL b - Blue y - Yellow L - Left array R - Right array

b HWMxxxyL c HWMxxxyyR

790 - 960 MHz HINT

1710 - 2690 MHz (Left)

1710 - 2690 MHz (Right)

Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 269 0 XX 0M 26 Hz 90 /

Any previous catalogue issues become invalid. Issue: 2013-01-08

13 3

DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M
Model: ATR451709
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 14, continuously adjustable 7 7 16 66 15.8 14 14 15 0 0 16 7 7 16 63 15 14 14 15 0 0 16 7 7 16 60 14 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1472 x 349 x 166 18 4.6 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 495 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 525 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) 14 14 15 0 0 16 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1990 +45 , -45 0 - 10, continuously adjustable 5 5 16 65 6.3 10 10 15 0 0 16 5 5 16 62 5.0 10 10 15 0 0 16 5 5 16 60 4.4 10 10 15 2 x (1710 - 2690) 1920 - 2200 2300 - 2690

14.2 14.0 13.6 14.4 14.2 13.8 14.6 14.4 14.0 16.7 16.9 16.5 17.3 17.5 17.0 17.2 17.4 16.7

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 16 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


0/ 69 -2 z H 0 71 M /1 90 60 26 X - 9 0 - XX 0 1 D 79 17

4 13

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M
Model: ATR451606
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 5 16 66 9.8 10 10 15 0 0 16 5 5 16 63 9.4 10 10 15 0 0 16 5 5 16 60 8.8 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1999 x 349 x 166 23 4.6 0 - 12 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 745 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) 10 10 15 0 0 17 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1990 +45 , -45 0 - 10, continuously adjustable 5 5 17 65 5.7 10 10 16 0 0 17 5 5 17 62 5.2 10 10 16 0 0 16 5 5 16 60 4.2 10 10 15 2 x (1710 - 2690) 1920 - 2200 2300 - 2690

15.7 15.8 15.4 15.8 15.9 15.5 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 16 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 269 0 XX 0M 26 Hz 90 /

Any previous catalogue issues become invalid. Issue: 2013-01-08

13 5

DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M
Model: ATR451607
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 5 16 67 7.9 10 10 16 0 0 17 5 5 16 65 7.5 10 10 16 0 0 17 5 5 16 64 7.0 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2593 x 349 x 166 28 5.6 0-8 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 950 (at 150 km/h) Lateral: 315 (at 150 km/h) Rear side: 985 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) 10 10 16 0 0 17 790 - 960 790 - 862 824 - 894 880 - 960 1710 - 1990 +45 , -45 0 - 10, continuously adjustable 5 5 17 66 5.7 10 10 16 0 0 17 5 5 17 62 5.2 10 10 16 0 0 16 5 5 16 60 4.2 10 10 15 2 x (1710 - 2690) 1920 - 2200 2300 - 2690

16.3 16.4 16.2 16.7 16.8 16.4 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


0/ 69 -2 z H 0 71 M /1 90 60 26 X - 9 0 - XX 0 1 D 79 17

6 13

DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/ 17.5i-M/M/M-B\R
Model: ATR4518R9
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 4 698 - 960 698 - 806 790 - 894 880 - 960 1710 - 1990 2 x (1710 - 2690) 1920 - 2170 2490 - 2690

+45 , -45 0 - 8, continuously adjustable 8 0 4 8 0 4 8

16.2 16.4 16.1 16.6 16.8 16.4 17.1 17.2 16.8 17.4 17.6 17.4 18.3 18.3 18.0 18.2 18.3 18.0 5 16 66 8.3 10 16 0 17 5 16 63 7.6 10 16 0 17 5 16 60 7.1 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 28 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 27 Typ. 17 Typ. 10 250 (at 50 ambient temperature) 10 0 16 17 4 17 68 5.2 8 16 0 17 4 17 63 4.8 8 16 0 16 4 16 60 4.0 8 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

-153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols

2685 x 349 x 148 37 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 1215 (at 150 km/h) Lateral: 445 (at 150 km/h) Rear side: 1555 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor, Internal Smart Bias-T
69 8 17 96 10 0/1 71 DX 269 0 XX 0M 26 Hz 90 /

AISG 1.1 / AISG 2.0

13 7

DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/ 17.5i-M/M/M-B\R
Model: ATR4518R9
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) Smart Bias-T port Lightning protection (kA) Internal motor, Internal smart Bias-T AISG 1.1 / AISG 2.0 DC 10 - 30 < 11 (motor activated) < 1 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) Internal Bias-T from +45 port (698 MHz - 960 MHz) (2.176MHz modulated data) 3 (10/350 s) 10 (8/20 s) Certication: CE, FCC, RoHS, WEEE

Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


0/ 69 -2 z H 0 71 M /1 90 60 26 X - 9 0 - XX 8 1 D 69 17

8 13

DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m


Model: ATR4518R3
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

1710 - 2690 1710 - 1990 1920 - 2200 2300 - 2690

1710 - 2170 1710 - 1990 1920 - 2170

2490 - 2690

+45 , -45 0 - 12, continuously adjustable 0 6 12 0 6 12 0 6 12 0 6 0 - 12, continuously adjustable 12 0 6 12 0 6 12

17.3 17.4 17.2 17.6 17.8 17.5 17.8 18.0 17.3 17.0 17.1 16.9 17.3 17.6 17.2 17.4 17.6 16.9 0 18 16 6 17 16 66 6.5 12 16 15 0 18 16 6 17 16 63 6.0 12 16 15 0 18 15 6 17 16 60 4.8 < 1.5 Intra-system: 30 Inter-system: 30 Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 12 16 15 0 17 16 6 16 16 66 6.5 12 15 15 0 17 16 6 16 16 63 6.0 12 15 15 0 17 15 6 16 16 60 4.8 12 15 15

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1445 x 299 x 109 15.8 4.6 0 - 16 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 520 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 600 (at 150 km/h) 150 200 6 x 7/16 DIN Female
17 10 24 26 90 90 - /17 DX 269 10 XX 0M - 2 Hz 17 0/

Bottom

13 9

DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m


Model: ATR4518R3
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG Lightning protection (kA) 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 4 5 6 7 RS-485B n/c RS-485A DC in/out DC return AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

8 n/c

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE Integrated RCU S/N: a HWMxxxbL b - Blue y - Yellow L - Left array R - Right array

b HWMxxxyL c HWMxxxyyR

1710 - 2690 MHz HINT

1710 - 2170 MHz

2490 - 2690 MHz

Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


0/ 17 -2 z 10 H 17 M 0/ 90 69 26 X - 2 0 - XX 10 249 D 17

Issue: 2013-01-08

0 14

DXXX-1710-2690/1710-2690/1710-2690-65/65/ 65-18i/18i/18i-M/M/M
Model: ATR451714
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
Side lobe suppression (Typ.) (dB) -for rst side lobe above main beam -within 0 - 15 sector above horizon

3 x (1710 - 2690) 1710 - 1990 1920 - 2200 +45 , -45 0 - 12, continuously adjustable 0 17.3 0 17 16 6 17.4 6 17 16 65 6.5 12 17.2 12 16 15 0 17.6 0 17 16 6 17.8 6 17 16 63 6.2 < 1.5 30 Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Mechanical Properties 12 17.5 12 16 15 0 17.7 0 17 16 6 18.0 6 17 16 60 5.2 12 17.5 12 16 15 0 17.8 0 17 15 6 18.0 6 17 16 60 4.7 12 17.3 12 16 15 2200 - 2490 2490 - 2690

Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding 0 60

Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

1445 x 449 x 115 20 4.8 0 - 16 50 - 115 Fiberglass Light grey -55 .. +65 Frontal: 750 (at 150 km/h) Lateral: 85 (at 150 km/h) Rear side: 835 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 17 26 10 90 - /17 DX 269 10 XX 0M - 2 Hz 69 0/

Any previous catalogue issues become invalid. Issue: 2013-01-08

14 1

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m


Model: AQU4518R0
Preliminary Issue
Electrical Properties
Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
0

790 - 960 790 - 894 880 - 960 1710 - 1990

1710 - 2690 1920 - 2200 2300 - 2690

1710 - 2170 1710 - 1990 1920 - 2170

2490 - 2690

+45 , -45 0 - 10, continuously adjustable


5 10 0 5 10 0

0 - 10, continuously adjustable


5 10 0 5 10 0 5 10 0

0 - 10, continuously adjustable


5 10 0 5 10 0 5 10

15.7 15.8 15.4 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2 17.2 17.4 17.0 17.7 17.9 17.4 17.5 17.6 17.0 5 16 10 16 0 17 5 16 10 16 0 17 5 17 10 16 0 17 5 17 10 16 0 16 5 16 10 15 0 17 5 16 10 16 0 17 5 16 10 16 0 16 5 16 10 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

65 9.6

64 8.8

66 5.7

63 5.2 < 1.5

60 4.2

66 5.7

63 5.2

60 4.2

Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Typ. 28 Typ. 18 Typ. 10 Typ. 28 Typ. 18 Typ. 10

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

250 (at 50 ambient temperature)

Mechanical Properties
Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ Hz 69 M - 2 90 0 26 71 /1 90 60 24 X - 9 0/ XX 0 17 DX 79 - 2 10 17

1999 x 349 x 166 27.5 5.6 0 - 12 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 705 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 730 (at 150 km/h) 150 200 8 x 7/16 DIN Female Bottom

2 14

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m


Model: AQU4518R0
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG Lightning protection (kA) 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 4 5 6 7 RS-485B n/c RS-485A DC in/out DC return AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

8 n/c

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE Integrated RCU S/N: a HWMxxxr r - Red b - Blue y - Yellow L - Left array R - Right array

b HWMxxxrr c HWMxxxr d HWMxxxr

790 - 960 MHz HINT

1710 - 2690 MHz

1710 - 2170 MHz

2490 - 2690 MHz

Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 79 10 0 - 2 - 96 17 0/ 0/ 17 DX 249 10 XX 0 - - 26 X 26 90 90 / M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

14 3

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-17i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m


Model: AQU4518R1
Preliminary Issue
Electrical Properties
Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
0

790 - 960 790 - 894 880 - 960 1710 - 1990

1710 - 2690 1920 - 2200 2300 - 2690

1710 - 2170 1710 - 1990 1920 - 2170

2490 - 2690

+45 , -45 0 - 10, continuously adjustable


5 10 0 5 10 0

0 - 10, continuously adjustable


5 10 0 5 10 0 5 10 0

0 - 10, continuously adjustable


5 10 0 5 10 0 5 10

16.7 16.6 16.3 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.7 17.2 17.2 17.2 17.0 17.7 17.9 17.4 17.5 17.6 17.0 5 16 10 16 0 17 5 16 10 16 0 17 5 17 10 16 0 17 5 17 10 16 0 16 5 16 10 15 0 17 5 16 10 16 0 17 5 16 10 16 0 16 5 16 10 15

Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60

65 8.2

64 7.3

66 5.7

63 5.2 < 1.5

60 4.2

66 5.7

63 5.2

60 4.2

Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Typ. 28 Typ. 18 Typ. 10 Typ. 28 Typ. 18 Typ. 10

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

250 (at 50 ambient temperature)

Mechanical Properties
Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
0/ Hz 69 M - 2 90 0 26 71 /1 90 60 24 X - 9 0/ XX 0 17 DX 79 - 2 10 17

2593 x 349 x 166 39 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 950 (at 150 km/h) Lateral: 315 (at 150 km/h) Rear side: 985 (at 150 km/h) 150 200 8 x 7/16 DIN Female Bottom

4 14

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-17i/18i/18i/18i-M/M/M/M-R EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m


Model: AQU4518R1
Preliminary Issue
RET Properties RET Type RET Protocols* Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Integrated RET AISG 2.0 / 3GPP DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 50 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return

Lightning protection (kA)

AISG interface (each pin) 3 (10/350 s) 10 (8/20 s)

* Please conrm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15 Certication: CE, FCC, RoHS, WEEE

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 79 10 0 - 2 - 96 17 0/ 0/ 17 DX 249 10 XX 0 - - 26 X 26 90 90 / M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

14 5

DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-2690-65/ 65/65/65/65-17i/17.5i/17.5i/17i/17i-M/M/M/M/M-B\R
Model: APE4517R2
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above main beam (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 Typ. 28 Typ. 18 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols
0/ 69 -2 z 10 MH 17 0 0/ 69 69 - 2 - 2 10 X 0 7 71 /1 XX /1 90 X 60 26 DX -9 08 1 69 17

698 - 960 698 - 806 824 - 894 880 - 960 1710 - 1990 +45 , -45 0 - 10, continuously adjustable 5 10 0 5 10 0 5 10 0 16.1 16.3 16.0 16.6 16.8 16.4 17.0 17.1 16.5

4 x (1710 - 2690) 1920 - 2170 2490 - 2690

0 - 10, continuously adjustable 5 10 0 5 10 0 5 10

16.2 16.3 16.0 16.8 17.1 16.4 16.5 16.8 16.2 15.9 16.1 15.7 16.4 16.9 16.0 16.2 16.4 15.8 5 16 67 8.4 10 16 0 17 5 16 64 8.0 10 16 0 17 5 16 62 7.4 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 27 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 10 16 0 17 5 17 68 7.0 10 16 0 17 5 17 63 6.1 10 16 0 16 5 16 60 5.4 10 15

Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding

2695 x 349 x 166 39 5.6 0-8 50 - 115 Fiberglass Light grey -40 .. +65 Frontal: 1000 (at 150 km/h) Lateral: 450 (at 150 km/h) Rear side: 970 (at 150 km/h) 150 200 10 x 7/16 DIN Female Bottom Internal motor, Internal Smart Bias-T AISG 1.1 / AISG 2.0

6 14

DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-2690-65/ 65/65/65/65-17i/17.5i/17.5i/17i/17i-M/M/M/M/M-B\R
Model: APE4517R2
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) Smart Bias-T port Lightning protection (kA) Internal motor, Internal smart Bias-T AISG 1.1 / AISG 2.0 DC 10 - 30 < 11 (motor activated) < 1 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) Internal Bias-T from +45 port (698 MHz - 960 MHz) (2.176MHz modulated data) 3 (10/350 s) 10 (8/20 s) Certication: CE, FCC, RoHS, WEEE

Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Issue: 2013-01-08

69 8 17 96 10 0/1 - 2 71 69 0 0 2 DX /17 690 XX 10 /17 XX - 26 10 90 - 2 M 69 Hz 0 /

Any previous catalogue issues become invalid.

14 7

DX4-1880-2690-90-16i-0F
Model: ATD451600
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 14.0 / 17 10 23 / 65 5 14.0 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 0 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 0 1 -26 2 < 0.7 <5 < 1.5 20 25 90 15 15.0 / 17 10 23 / 65 5 14.5 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.5 5 16 10 25 -16 65 5 15.2 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 0 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

14 8

DX4-1880-2690-90-16i-0F
Model: ATD451600
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 9 x N Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

14 9

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-3F
Model: ATD451601
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 14.0 / 17 10 23 / 65 5 14.0 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 3 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 3 1 -26 2 < 0.7 <5 < 1.5 25 28 90 15 15.0 / 17 10 23 / 65 5 14.5 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.5 5 16 10 25 -16 65 5 15.2 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 3 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

15 0

DX4-1880-2690-90-16i-3F
Model: ATD451601
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 9 x N Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

15 1

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-6F
Model: ATD451602
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 14.0 / 17 10 23 / 65 5 14.0 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 6 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 6 1 -26 2 < 0.7 <5 < 1.5 28 30 90 15 15.0 / 17 10 23 / 65 5 14.5 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.5 5 16 10 25 -16 65 5 15.2 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 6 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

15 2

DX4-1880-2690-90-16i-6F
Model: ATD451602
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 9 x N Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

15 3

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-9F
Model: ATD451603
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 14.0 / 17 10 23 / 65 5 14.0 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 9 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 9 1 -26 2 < 0.7 <5 < 1.5 28 30 90 15 15.0 / 17 10 23 / 65 5 14.5 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.5 5 16 10 25 -16 65 5 15.2 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 9 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

15 4

DX4-1880-2690-90-16i-9F
Model: ATD451603
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 9 x N Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

15 5

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-0F-C
Model: ATD4516C0
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 13.5 / 17 10 23 / 65 5 13.5 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 0 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 0 1 -26 2 < 0.7 <5 < 1.5 20 25 90 15 14.5 / 17 10 23 / 65 5 14.0 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.0 5 16 10 25 -16 65 5 14.7 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 0 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

15 6

DX4-1880-2690-90-16i-0F-C
Model: ATD4516C0
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 4 x cluster Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

-2 DX 69 4 0M

15

Hz

www.huawei.com

DX4-1880-2690-90-16i-3F-C
Model: ATD4516C1
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 13.5 / 17 10 23 / 65 5 13.5 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 3 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 3 1 -26 2 < 0.7 <5 < 1.5 25 28 90 15 14.5 / 17 10 23 / 65 5 14.0 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.0 5 16 10 25 -16 65 5 14.7 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 3 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

15 8

DX4-1880-2690-90-16i-3F-C
Model: ATD4516C1
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 4 x cluster Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

15 9

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-6F-C
Model: ATD4516C2
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 13.5 / 17 10 23 / 65 5 13.5 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 6 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 6 1 -26 2 < 0.7 <5 < 1.5 28 30 90 15 14.5 / 17 10 23 / 65 5 14.0 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.0 5 16 10 25 -16 65 5 14.7 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 6 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

16 0

DX4-1880-2690-90-16i-6F-C
Model: ATD4516C2
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 4 x cluster Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

16 1

-2 DX 69 4 0M

Hz

www.huawei.com

DX4-1880-2690-90-16i-9F-C
Model: ATD4516C3
Preliminary Issue
Electrical Properties Frequency range (MHz) General parameters Polarization Electrical downtilt () Electrical downtilt tolerance () Coupling factor between calibration port and each antenna port (dB) Max. amplitude tolerance from calibration port to input ports (dB) Max. phase tolerance from calibration port to input ports () Ports VSWR Co-polarization isolation between ports (dB) Cross-polarization isolation between ports (dB) Horizontal 3dB beam width () Gain (dBi) Single column beam Vertical 3dB beam width () Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Horizontal 3dB beam width () Gain (dBi) Gain roll-off at sector edge (dB) Vertical 3dB beam width () 65 Broadcast beam Cross polar ratio (0) (dB) Cross polar ratio (60) (dB) Front to back ratio (dB) Vertical side lobe suppression for rst side lobe above main beam (dB) Null ll at rst null point below main beam (dB) 0 direct beam gain (dBi) 0 direct beam horizontal 3dB beam width () 0 direct beam side lobe suppression (dB) Service beam 60 direct beam gain (dBi) 60 direct beam horizontal 3dB beam width () 60 direct beam horizontal side lobe suppression (dB) 0 direct beam cross polar ratio (0) (dB) 0 direct beam front to back ratio (dB) 100 15 13.5 / 17 10 23 / 65 5 13.5 12 2 7.0 18 10 28 -16 Typ. -18 20.0 29 -12 17.5 35 -5 20 28 9 1 -26 2 < 0.7 <5 < 1.5 1880 - 1920 (F) 2010 - 2025 (A) +45 , -45 9 1 -26 2 < 0.7 <5 < 1.5 28 30 90 15 14.5 / 17 10 23 / 65 5 14.0 12 2 6.5 18 10 28 -16 Typ. -18 20.5 26 -12 17.5 32 -5 20 28 65 10 16.0 5 16 10 25 -16 65 5 14.7 12 2 5.0 18 10 28 -16 Typ. -18 22.0 21 -12 19.5 25 -4 20 28 9 1 -26 2 < 0.7 <5 < 1.5 2500 - 2690 (D)

Calibration and electrical parameters

Radiation parameters

18 80 0M 69 - 2 X4 D Hz

16 2

DX4-1880-2690-90-16i-9F-C
Model: ATD4516C3
Preliminary Issue
Electrical Properties Distance between columns (mm) Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 75 1396 x 319 x 116 13.0 4.6 -5 - 10 50 - 115 UPVC Light grey -55 .. +65 Frontal: 620 (at 150 km/h) Lateral: 160 (at 150 km/h) Rear side: 680 (at 150 km/h) 150 200 4 x cluster Female Bottom

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

18

80

16 3

-2 DX 69 4 0M

Hz

www.huawei.com

DX-2300-2700-60-18i-M
Model: A25451804

Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Max. CW input power (W) Impedance () Grounding () (dBi) () (dB)Typ. 2 17.0 2 18 6 17.3 6 17 64 7.0 30 Typ. 30 15 2 - 10 250 50 DC Ground 2300 - 2500 2500 - 2700 +45 , -45 1.45 10 17.0 10 16 2 17.3 2 18 6 17.6 6 17 60 6.5 10 17.1 10 16

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1060 x 155 x 79 6 2.7 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 120 (v=150 km/h) Lateral: 90 (v=150 km/h) Rear side: 180 (v=150 km/h) 200 2 x N-50KF

2300 - 2700 X +45 -45

N-50KF

N-50KF

2300 - 2500 MHz

2500 - 2700 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

23 00

0M 70 -2 X D Hz

16 4

DXX-2300-2700/2300-2700-65/65-18i/18i-M
Model: A25451803

Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Max. CW input power (W) Impedance () Grounding () (dBi) () (dB)Typ. 2 17.0 2 18 6 17.3 6 17 65 7.0 30 Typ. 28 15 2 - 10 250 50 DC Ground 2300 - 2500 2500 - 2700 +45 , -45 1.45 10 17.0 10 16 2 17.3 2 18 6 17.6 6 17 65 6.5 10 17.1 10 16

Mechanical Properties Dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1060 x 289 x 85 11 4.5 0 - 16 50 - 115 Fiberglass -55 .. +65 Frontal: 230 (v=150 km/h) Lateral: 100 (v=150 km/h) Rear side: 340 (v=150 km/h) 200 4 x N-50KF

2300 - 2700 X +45 -45

2300 - 2700 X +45 -45

N-50KF

N-50KF

N-50KF

N-50KF

2300 - 2500 MHz

2500 - 2700 MHz

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
27 00 M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

16 5

23 00

-2 70 0/ 23 DX 00 X

CX-1710-2690-65-18i-M
Model: A264518S0

Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above main beam (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Antenna net weight (kg) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position Relative directions of internal antennas (sector axis) Mechanical interface 1793 x 230 and 250 26.2 Fiberglass Light grey -55 .. +65 150 200 3 x 2 x 7/16 DIN Female Bottom - inside service area 0, 120, 240 Flange connection 3 x M10 bolt at a graduated diameter of 257 mm 1793 1443 310 (at 150 km/h) 230 0 60 2 17.2 2 17 6 17.3 6 17 69 5.7 12 16.8 12 15 2 17.7 2 16 6 17.8 6 16 65 6.1 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3.0 Typ. 2.0 (within 10dB HBW) 50 DC Ground 1710 - 2690 1710 - 1990 1920 - 2200 +45 , -45 2 - 12 , continuously adjustable 12 17.5 12 15 2 18.2 2 19 6 18.3 6 18 62 5.5 12 17.5 12 16 2 18.5 2 19 6 18.3 6 18 60 4.9 12 17.2 12 16 2200 - 2490 2490 - 2690

350

service area (cover attached)

Accessories (only Huawei product applies, order separately if required) SBT ASBT00001 RCU ARCU01109 (AISG 1.1) ARCU02004 (AISG 2.0)

250

17 10

0M 69 -2 X C Hz

16 6

CX-1710-2690-65-18i-M
Model: A264518S0

57

55

6 7/1
59

(F)

7/1

6(

F)

-45 7/16 (F)

-45 7/16 (F)


www.huawei.com

1710 - 2690

-45

-45

1710 - 2690 1710 - 2690

-45
7/1 6(

-45
6( F)

F)

7/1

Unit: mm Flange interface (thickness: 5 mm):

2300 - 2500 MHz HINT

2500 - 2700 MHz

Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

17

10

16 7

-2 CX 690

Hz

3 Sector Clamp Kit Mounting Hardware


Model: ASMC00001 ASMC00002 ASMC00003

Suitable for all antennas with an antenna housing width less than 400 mm. Adjustment is available together with standard bracket within antenna package. Support the third party customized camouage cover.

D Wmax
Wmax: Maximum width of antenna D: Distance between mast center and back of antenna

3 sector clamp

dia mast me ter

mounting support clamp Specications Model Angle between antennas () Mast diameter (mm) Wmax (mm) D (mm) Number of pieces Weight (approx.) (kg) Max. operational wind speed (km/h) 3 sector clamp Mounting support clamp Material Connecting plate Screws Nuts Stainless steel Stainless steel Stainless steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel ASMC00001 120 88.9 280 100 ASMC00002 120 114.3 380 113 ASMC00003 120 139.7 400 128

2 x 3 sector clamp 2 x 3 sector clamp 2 x 3 sector clamp 2 x mounting support clamp 2 x mounting support clamp 2 x mounting support clamp 6 x connecting plate 6 x connecting plate 6 x connecting plate 5.8 150 6.3 150 6.6 150

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

TS C 8 16

AISG Color Coding Standard

AISG Color Coding for Connectors on Base Station Antennas


Upper Band Edge Range 700MHz to 1000MHz 1001MHz to 1700MHz 1701MHz to 2300MHz 2301MHz to 4000MHz Assigned Color Code RAL 3020 RAL 6029 RAL 5015 RAL 1023 Base Color Tag r g b y

One Color making Different Pattern on Dual-band or Multi-band

r,g,b,y

Dual-band Antenna 800/900MHz EasyRET 800/2100MHz EasyRET

Tri-band Antenna 1800Mhz/2/2.6GHz EasyRET 1800MHz/2/2.6GHz MET

Quad-band Antenna

800/1800MHz/2/2.6GHz EasyRET

Penta-band Antenna

800/900/1800MHz/2/2.6GHz EasyRET
AI SG C St olo an r da Co rd din g

16 9

AISG Color Coding Standard

Huawei RCU SN Rule

Total: 19bytes

Factory code

Total 10 alphanumeric, com from relative antenna 3~7, last 4 digits of antenna BBOM 8th type: Year(last no. of year) 9th type: Month (1~9, A,B ,C) 10~13th type: running no.

Make up 0~9 digits, decided by relevant latter color coding , ll 19digits

ALD Category: 1 Capital letter D~G: TMA, may have more option in the future. P: External pre-commission RCU, may have more option in the future. M: integrated RCU, may have more option in the future B: Normal RCU, ARCU2004, ARCU1115

Color coding according AISG standard Small letter: array color and pattern r-red, rr-2nd red, rrr-3rd red, etc g-green, gg-2nd green, etc b-blue, bb-2nd blue, etc. y-yellow, yy-2nd yellow, etc. Capital letter: array position indicator (if needed) Horizontal-L,CL,C,CR,R Vertical-T,MT,M,MB,B Note: array color and pattern dened by HW, array position HW use denition in AISG standard

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

S AI

g in od rC d lo ar Co nd G Sta

0 17

Antenna Line Products

DTMA08-008 DTMA08-009

Model: ATA801100 (AISG 1.1) Model: ATA802000 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz M Hz 62 - 8 21M 32 - 8 : 8 91 :7 TX

2 17

DTMA08-008 DTMA08-009

Model: ATA801100 (AISG 1.1) Model: ATA802000 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 190 x 240 x 120 (without connectors, without brackets) 365 x 515 x 215 6.1 (with brackets) 7.4 Approx. 5.5 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 791 - 821 30 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 832 - 862 30 18 (DC ON) 13 (DC OFF) 3 (DC OFF) 8 - 16 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)

17 3

TX

:8 : 7 32 91 - 8 - 8 62M 21 Hz M Hz

RX

DTMA08-008 DTMA08-009

Model: ATA801100 (AISG 1.1) Model: ATA802000 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


RX TX Hz M Hz 62 - 8 21M 32 - 8 : 8 91 :7

4 17

DTMA09-014 DTMA09-015

Model: ATA901102 (AISG 1.1) Model: ATA902002 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

17 5

TX

:8 : 9 80 25 - 9 - 9 05M 50 Hz M Hz

RX

DTMA09-014 DTMA09-015

Model: ATA901102 (AISG 1.1) Model: ATA902002 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 198 x 308 x 70.5 (without connectors, without brackets) 315 x 515 x 190 5.5 (with brackets) 6.6 Approx. 4.3 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 925 - 950 25 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 880 - 905 25 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 8 - 16 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)

RX Hz M Hz 05 - 9 50M 80 - 9 : 8 25 :9 TX

6 17

DTMA09-014 DTMA09-015

Model: ATA901102 (AISG 1.1) Model: ATA902002 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
:8 : 9 80 25 - 9 - 9 05M 50 Hz M Hz TX

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

RX

17 7

DTMA09-010 DTMA09-011

Model: ATA901101 (AISG 1.1) Model: ATA902001 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz M Hz 15 - 9 60M 80 - 9 : 8 25 :9 TX

8 17

DTMA09-010 DTMA09-011

Model: ATA901101 (AISG 1.1) Model: ATA902001 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 248 x 324 x 75.5 (without connectors, without brackets) 365 x 515 x 215 6.5 (with brackets) 7.7 Approx. 6.1 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 925 - 960 35 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 880 - 915 35 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 8 - 16 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)

17 9

TX

:8 : 9 80 25 - 9 - 9 15M 60 Hz M Hz

RX

DTMA09-010 DTMA09-011

Model: ATA901101 (AISG 1.1) Model: ATA902001 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


RX TX Hz M Hz 15 - 9 60M 80 - 9 : 8 25 :9

0 18

DTMA09-016 DTMA09-017

Model: ATA901103 (AISG 1.1) Model: ATA902003 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

18 1

TX

:8 : 9 90 35 - 9 - 9 15 60 MH z M Hz

RX

DTMA09-016 DTMA09-017

Model: ATA901103 (AISG 1.1) Model: ATA902003 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 198 x 308 x 70.5 (without connectors, without brackets) 315 x 515 x 190 5.5 (with brackets) 6.6 Approx. 4.3 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 935 - 960 25 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 890 - 915 25 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 8 - 16 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)

RX Hz M z 15 MH - 9 60 90 - 9 : 8 35 :9 TX

2 18

DTMA09-016 DTMA09-017

Model: ATA901103 (AISG 1.1) Model: ATA902003 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
:8 : 9 90 35 - 9 - 9 15 60 MH z M Hz TX

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

RX

18 3

DTMA18-022 DTMA18-023

Model: ATA181101 (AISG 1.1) Model: ATA182001 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz M 5 Hz M 78 - 1 880 0 -1 71 : 1 805 :1 TX

4 18

DTMA18-022 DTMA18-023

Model: ATA181101 (AISG 1.1) Model: ATA182001 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 220 x 100 (without connectors, without brackets) 315 x 465 x 225 5.1 (with brackets) 6.2 Approx. 3.5 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 120 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 1805 - 1880 75 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 1710 - 1785 75 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 12 Avg. < 1.4 (+22 ... +28 ) 12 24

18 5

TX

:1 : 1 710 80 -1 5 - 1 785 88 M 0 Hz M Hz

RX

DTMA18-022 DTMA18-023

Model: ATA181101 (AISG 1.1) Model: ATA182001 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


RX TX Hz M 5 Hz M 78 - 1 880 0 -1 71 : 1 805 :1

6 18

DTMA21-006 DTMA21-007

Model: ATA211101 (AISG 1.1) Model: ATA212001 (AISG 2.0

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

18 7

TX

:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz

RX

DTMA21-006 DTMA21-007

Model: ATA211101 (AISG 1.1) Model: ATA212001 (AISG 2.0

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 205 x 54.5 (without connectors, without brackets) 265 x 395 x 195 3.3 (with brackets) 4.0 Approx. 1.8 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 120 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 2110 - 2170 60 Avg. < 0.25 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -122 (2 TX carriers at +43 dBm) Rx Specications 1920 - 1980 60 18 (DC ON) 15 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.2 (+22 ... +28 ) 12 24

RX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2 TX

8 18

DTMA21-006 DTMA21-007

Model: ATA211101 (AISG 1.1) Model: ATA212001 (AISG 2.0

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz TX

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

RX

18 9

DTMA26-012 DTMA26-013

Model: ATA261100 (AISG 1.1) Model: ATA262000 (AISG 2.0)

Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz 0M Hz 57 M - 2 690 0 -2 50 : 2 620 :2 TX

0 19

DTMA26-012 DTMA26-013

Model: ATA261100 (AISG 1.1) Model: ATA262000 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 210 x 54.5 (without connectors, without brackets) 265 x 395 x 195 3.1 (with brackets) 4.0 Approx. 1.8 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30 - 125 // Optional: 40 - 140 4 x 7/16 DIN Female (Long neck) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 120 150 - 280 < 3.5 AISG Mode 9 - 30 40 - 370 AISG 2620 - 2690 70 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 2500 - 2570 70 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.3 (+22 ... +28 ) 12 24

19

TX

:2 : 2 500 62 -2 0 - 2 570 M 69 0M Hz Hz

RX

DTMA26-012 DTMA26-013

Model: ATA261100 (AISG 1.1) Model: ATA262000 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


RX TX Hz 0M Hz 57 M - 2 690 0 -2 50 : 2 620 :2

2 19

DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 16 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 2.0 protocol.

Appearance and Block Diagram

19 3

TX

:8 : 9 80 25 - 9 - 9 15M 60 Hz M Hz

RX

DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Filter Specications Frequency range (MHz) Insertion loss (dB) Return loss (dB) Input power (W) Intermodulation products (dBm) 1700 - 2700 < 0.5 18 < 160 (+52 dBm) CW -117 (3rd order, 2 TX carriers at +43 dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) 8.5 - 15 40 - 110 (12 V DC) 150 - 280 (12 V DC) < 3.5 Environmental Specication -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) Mechanical Specication 4 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 8.5 (with brackets) Default: 30 - 125 // Optional: 40 - 140 248 x 324 x 100 (without connectors, without brackets) Approx. 8.0 AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG 925 - 960 35 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 880 - 915 35 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 8 - 16 (0.5 dB Step) Avg. < 1.3 (16 dB Gain, +22 ... +28 ) 12 (16 dB Gain) 24 (16 dB Gain)

RX Hz M Hz 15 - 9 60M 80 - 9 : 8 25 :9 TX

4 19

DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
:8 : 9 80 25 - 9 - 9 15M 60 Hz M Hz TX

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

RX

19 5

DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2 TX

6 19

DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Filter GSM900 Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Isolation (dB) Input power (W) Intermodulation products (dBm) 880 - 960 80 < 0.3 18 > 45 (1710 - 1880 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz) < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (3rd order, 2 TX carriers at +43 dBm) Electrical properties CWA Mode AISG Mode 8.5 - 15 40 - 120 (12 V DC) 150 - 280 (12 V DC) < 3.5 Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) Mechanical Specication 6 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 5.5 (with brackets) Default: 30 - 125 // Optional: 40 - 140 228 x 205 x 54.5 (without connectors, without brackets) Approx. 2.6 8.5 - 30 40 - 370 (12 V DC) AISG 2110 - 2170 60 Avg. < 0.3 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -122 (2 TX carriers at +43 dBm) Rx Specications 1920 - 1980 60 18 (DC ON) 15 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.3 (+22 ... +28 ) 12 24

DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W)

19 7

TX

:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz

RX

DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


RX TX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2

8 19

DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 2.0 protocol.

Appearance and Block Diagram

19 9

TX

:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz

RX

DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Filter DCS1800 Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Input power (W) Intermodulation products (dBm) 1710 - 1880 170 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (3rd order, 2 TX carriers at +43 dBm) Electrical properties CWA Mode AISG Mode 8.5 - 15 40 - 120 (12 V DC) 150 - 280 (12 V DC) < 3.5 Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) Mechanical Specication 4 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 6.5 (with brackets) Default: 30 - 125 // Optional: 40 - 140 175 x 245 x 100 (without connectors, without brackets) Approx. 4.3 8.5 - 30 40 - 370 (12 V DC) AISG 2110 - 2170 60 Avg. < 0.3 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -122 (2 TX carriers at +43 dBm) Rx Specications 1920 - 1980 60 18 (DC ON) 15 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.4 (+22 ... +28 ) 12 24

DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W)

RX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2 TX

0 20

DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz TX

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

RX

20 1

DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2 TX

2 20

DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Filter GSM900 Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Isolation (dB) Input power (W) Intermodulation products (dBm) Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Isolation (dB) Input power (W) Intermodulation products (dBm) 880 - 960 80 < 0.3 18 > 45 (1710 - 1880 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz) < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (3rd order, 2 TX carriers at +43 dBm) Filter DCS1800 Specications 1710 - 1880 170 0.4 18 > 45 (880 - 960 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz) < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (3rd order; with 2 x 43dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) 8.5 - 15 40 - 120 (12 V DC) 150 - 280 (12 V DC) < 3.5 Environmental Specication -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us)
:1 : 2 920 11 -1 0 - 2 980 M 17 0M Hz Hz TX

2110 - 2170 60 Avg. < 0.3 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -122 (2 TX carriers at +43 dBm) Rx Specications 1920 - 1980 60 18 (DC ON) 15 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.3 (+22 ... +28 ) 12 24

AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG

RX

20 3

DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
Mechanical Specication 8 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 7 (with brackets) Default: 30 - 125 // Optional: 40 - 140 224 x 312 x 95 (without connectors, without brackets) Approx. 4.7

RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


RX TX Hz 0M Hz 98 M - 1 170 0 -2 92 : 1 110 :2

4 20

MTMA18/21-026 MTMA18/21-027
Preliminary Issue
Product Description

Model: ATADU1102 (AISG 1.1) Model: ATADU2002 (AISG 2.0)

The dual multiband tower mounted amplier (MTMA) is a low-noise amplier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Designed for co-siting purposes. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

TX

20 5

RX :1 71 :1 80 0 1 5 - 1 785 /1 88 9 0/ 21 20 10 1 - 2 980 M 17 0M Hz Hz

MTMA18/21-026 MTMA18/21-027
Preliminary Issue

Model: ATADU1102 (AISG 1.1) Model: ATADU2002 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical Specications CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) 4 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 7.5 Default: 30 - 125 // Optional: 40 - 140 196 x 280 x 110 (without connectors, without brackets) Approx. 5.9 -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 (12 V DC) 150 - 280 (12 V DC) < 3.5 AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG Avg. < 1.5 12 24 1805 - 1880 75 Avg. < 0.5 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -110 (2 TX carriers at +43 dBm) Rx Specications 1710 - 1785 75 18 (DC ON) 13 (DC OFF) Typ. < 3.0 12 1 Avg. < 1.3 2110 - 2170 60 2110 - 2170 60 Avg. < 0.3

RX Hz 0M Hz 98 M -1 70 20 - 21 19 10 5/ 21 78 0/ -1 88 0 -1 71 5 :1 80 :1 TX

6 20

MTMA18/21-026 MTMA18/21-027
Preliminary Issue

Model: ATADU1102 (AISG 1.1) Model: ATADU2002 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
RX :1 71 :1 80 0 1 5 - 1 785 /1 88 9 0/ 21 20 10 1 - 2 980 M 17 0M Hz Hz TX

Any previous catalogue issues become invalid. Issue: 2013-01-08

20 7

MTMA18/21-028 MTMA18/21-029
Preliminary Issue
Product Description

Model: ATADU1103 (AISG 1.1) Model: ATADU2003 (AISG 2.0)

The dual multiband tower mounted amplier (MTMA) is a low-noise amplier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Designed for co-siting purposes. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz 0M Hz 98 M -1 70 20 - 21 19 10 5/ 21 78 0/ -1 88 0 -1 71 5 :1 80 :1 TX

8 20

MTMA18/21-028 MTMA18/21-029
Preliminary Issue

Model: ATADU1103 (AISG 1.1) Model: ATADU2003 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical Specications CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) 6 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 7.5 Default: 30 - 125 // Optional: 40 - 140 196 x 280 x 110 (without connectors, without brackets) Approx. 5.9 -40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.5 - 15 40 - 110 (12 V DC) 150 - 280 (12 V DC) < 3.5 AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG Avg. < 1.5 12 24 1805 - 1880 75 Avg. < 0.5 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -110 (2 TX carriers at +43 dBm) Rx Specications 1710 - 1785 75 18 (DC ON) 13 (DC OFF) Typ. < 3.0 12 1 Avg. < 1.3 2110 - 2170 60 2110 - 2170 60 Avg. < 0.3

TX

20 9

:1 71 :1 80 0 1 5 - 1 785 /1 88 9 0/ 21 20 10 1 - 2 980 M 17 0M Hz Hz

RX

MTMA18/21-028 MTMA18/21-029
Preliminary Issue

Model: ATADU1103 (AISG 1.1) Model: ATADU2003 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


RX

Issue: 2013-01-08

Hz 0M Hz 98 M -1 70 20 - 21 19 10 5/ 21 78 0/ -1 88 0 -1 71 5 :1 80 :1 TX

0 21

MTMA08/09-024 MTMA08/09-025
Preliminary Issue
Product Description

Model: ATADU1101 (AISG 1.1) Model: ATADU2001 (AISG 2.0)

The dual multiband tower mounted amplier (MTMA) is a low-noise amplier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Designed for co-siting purposes. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

TX

21 1

RX :8 : 7 32 91 - 8 - 8 62/ 21 88 0 /9 25 - 9 - 9 05M 50 Hz M Hz

MTMA08/09-024 MTMA08/09-025
Preliminary Issue

Model: ATADU1101 (AISG 1.1) Model: ATADU2001 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) 791 - 821 30 Typ. < 0.4 (Max. 0.7 @ 65 ) 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -110 (2 TX carriers at +43 dBm) Rx Specications Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical Specications CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L)
RX Hz M Hz 05 - 9 50M 80 - 9 /8 5 62 92 - 8 21/ 32 - 8 : 8 91 :7 TX

925 - 960 35

832 - 862 30 18 (DC ON) 13 (DC OFF) Typ. < 3.0 12 1 Typ. < 1.1 (Max. 1.9 @ 65 ) 8 20

880 - 915 35

AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG < 3.5

8.5 - 15 40 - 110 (12 V DC) 150 - 280 (12 V DC)

-40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us)

4 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 11 Default: 30 - 125 // Optional: 40 - 140 247 x 342 x 132 (without connectors, without brackets) Approx. 10.8

2 21

MTMA08/09-024 MTMA08/09-025
Preliminary Issue

Model: ATADU1101 (AISG 1.1) Model: ATADU2001 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
RX :8 : 7 32 91 - 8 - 8 62/ 21 88 0 /9 25 - 9 - 9 05M 50 Hz M Hz TX

Any previous catalogue issues become invalid. Issue: 2013-01-08

21 3

MTMA08/09-030 MTMA08/09-031
Preliminary Issue
Product Description

Model: ATADU1105 (AISG 1.1) Model: ATADU2005 (AISG 2.0)

The dual multiband tower mounted amplier (MTMA) is a low-noise amplier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Designed for co-siting purposes. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

RX Hz M Hz 05 - 9 50M 80 - 9 /8 5 62 92 - 8 21/ 32 - 8 : 8 91 :7 TX

4 21

MTMA08/09-030 MTMA08/09-031
Preliminary Issue

Model: ATADU1105 (AISG 1.1) Model: ATADU2005 (AISG 2.0)

Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) 791 - 821 30 Typ. < 0.4 (Max. 0.7 @ 65 ) 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -110 (2 TX carriers at +43 dBm) Rx Specications Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical Specications CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) Volume (L) 6 x 7/16 DIN Female (Long neck) 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting // Mast mounting 11 Default: 30 - 125 // Optional: 40 - 140 247 x 342 x 132 (without connectors, without brackets)
RX :8 : 7 32 91 - 8 - 8 62/ 21 88 0 /9 25 - 9 - 9 05M 50 Hz M Hz TX

925 - 960 35

832 - 862 30 18 (DC ON) 13 (DC OFF) Typ. < 3.0 12 1 Typ. < 1.1 (Max. 1.9 @ 65 ) 8 20

880 - 915 35

AISG Mode 8.5 - 30 40 - 370 (12 V DC) AISG < 3.5

8.5 - 15 40 - 110 (12 V DC) 150 - 280 (12 V DC)

-40 .. +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us)

Approx. 10.8

21 5

MTMA08/09-030 MTMA08/09-031
Preliminary Issue

Model: ATADU1105 (AISG 1.1) Model: ATADU2005 (AISG 2.0)

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


RX

Issue: 2013-01-08

Hz M Hz 05 - 9 50M 80 - 9 /8 5 62 92 - 8 21/ 32 - 8 : 8 91 :7 TX

6 21

DC-0023-2
Model: ACOMD2H09

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H09
Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

21 7

DC-0023-2
Model: ACOMD2H09

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 880 - 960 Typ. < 0.3 (790 MHz - 862 MHz) Typ. < 0.25 (880 MHz - 960 MHz) Stop By-pass (max. 2500 mA) > 50 < 1.28 < 200 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) 260 x 365 x 210 Double Unit: 6.8 7.8 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H09 790 - 862

Intermodulation products (dBm)

Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

8 21

DC-0023-2
Model: ACOMD2H09

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

21 9

DC-0013-2
Model: ACOMD2H04

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H04
Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

0 22

DC-0013-2
Model: ACOMD2H04

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 880 - 960 Typ. < 0.3 (790 MHz - 862 MHz) Typ. < 0.25 (880 MHz - 960 MHz) Stop By-pass (max. 2500 mA) > 50 < 1.28 < 200 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) 260 x 365 x 210 Double Unit: 6.8 7.8 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // outdoor IP67 10 (8/20 us) ACOMD2H04 790 - 862

Intermodulation products (dBm)

Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

22 1

DC-0013-2
Model: ACOMD2H04

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

2 22

DC-0037-2
Model: ACOMD2H18
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H18
Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

22 3

DC-0037-2
Model: ACOMD2H18
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 880 - 960 < 0.3 (790 MHz - 862 MHz) < 0.25 (880 MHz - 960 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 50 < 1.28 < 200 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) 260 x 365 x 210 Double Unit: 6.8 7.8 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H18 790 - 862

Intermodulation products (dBm)

Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

4 22

DC-0037-2
Model: ACOMD2H18
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

22

DC-0029-2
Model: ACOMD2H15
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H15
Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

6 22

DC-0029-2
Model: ACOMD2H15
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 880 - 960 < 0.3 (790 MHz - 862 MHz) < 0.25 (880 MHz - 960 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 50 < 1.24 < 200 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 female (long neck) Wall mounting // Mast mounting Double Unit: 7 Default: 40 - 135 Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H15 790 - 862

Intermodulation products (dBm)

Ba Ba nd nd 1 : 7 2 : 8 90 80 - 8 - 9 62M 60 Hz M Hz

22 7

DC-0029-2
Model: ACOMD2H15
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


Hz M Hz 62 - 8 60M 90 - 9 : 7 80 1 8 nd 2 : Ba nd Ba

8 22

DC-0027-2
Model: ACOMD2H14
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H14
Ba Ba nd 1 nd :7 2 : 8 90 -8 80 - 2 62 20 MH 0M z Hz

22 9

DC-0027-2
Model: ACOMD2H14
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Port 1 Port 3 Insertion loss* (dB) Port 2 Port 3 Port 1 Port 3 Port 2 Port 3 Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 2 880 - 2200 < 0.3 (790 MHz - 862 MHz) < 0.25 (880 MHz - 960 MHz) < 0.15 (1710 MHz - 2200 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 50 < 1.24 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 female (long neck) Wall mounting // Mast mounting Double Unit: 7.5 Default: 40 - 135 Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H14 790 - 862

DC/AISG transparency

Intermodulation products (dBm)

Hz z M 62 MH - 8 00 90 22 :7 01 8 :8 nd Ba d 2 n Ba

0 23

DC-0027-2
Model: ACOMD2H14
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
Ba Ba nd 1 nd :7 2 : 8 90 -8 80 - 2 62 20 MH 0M z Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

23 1

DC-0019-2
Model: ACOMD2H11

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H11
Hz z M H 60 M - 9 200 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

2 23

DC-0019-2
Model: ACOMD2H11

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1710 - 2200 Typ. < 0.15 (698 MHz - 960 MHz) Typ. < 0.15 (1710 MHz - 2200 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H11 698 - 960

Intermodulation products (dBm)

B Ba and nd 1 : 2 : 1 698 71 -9 0 - 2 60M 20 H 0M z Hz

23 3

DC-0019-2
Model: ACOMD2H11

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz z M H 60 M - 9 200 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

4 23

DC-0017-2
Model: ACOMD2H10

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H10
B Ba and nd 1 : 2 : 1 698 71 -9 0 - 2 60M 20 H 0M z Hz

23 5

DC-0017-2
Model: ACOMD2H10

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1710 - 2200 Typ. < 0.15 (698 MHz - 960 MHz) Typ. < 0.15 (1710 MHz - 2200 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H10 698 - 960

Intermodulation products (dBm)

Hz z M H 60 M - 9 200 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

6 23

DC-0017-2
Model: ACOMD2H10

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba and nd 1 : 2 : 1 698 71 -9 0 - 2 60M 20 H 0M z Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

23 7

DC-0038-2
Model: ACOMD2H19
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H19
Hz z M H 60 M - 9 200 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

8 23

DC-0038-2
Model: ACOMD2H19
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1710 - 2200 < 0.15 (698 MHz - 960 MHz) < 0.15 (1710 MHz - 2200 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H19 698 - 960

Intermodulation products (dBm)

B Ba and nd 1 : 2 : 1 698 71 -9 0 - 2 60M 20 H 0M z Hz

23 9

DC-0038-2
Model: ACOMD2H19
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


Hz z M H 60 M - 9 200 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

0 24

DC-0020-2
Model: ACOMD2H13

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H13
B Ba and nd 1 : 2 : 2 698 49 -9 0 - 2 60M 70 H 0M z Hz

24 1

DC-0020-2
Model: ACOMD2H13

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 Typ. < 0.15 (698 MHz - 960 MHz) Typ. < 0.15 (2490 MHz - 2700 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H12 698 - 960

Intermodulation products (dBm)

Hz z M H 60 M - 9 700 98 - 2 : 6 90 1 4 nd :2 Ba d 2 n Ba

2 24

DC-0020-2
Model: ACOMD2H13

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba and nd 1 : 2 : 2 698 49 -9 0 - 2 60M 70 H 0M z Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

24 3

DC-0018-2
Model: ACOMD2H12

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H12
Hz z M H 60 M - 9 700 98 - 2 : 6 90 1 4 nd :2 Ba d 2 n Ba

4 24

DC-0018-2
Model: ACOMD2H12

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 Typ. < 0.15 (698 MHz - 960 MHz) Typ. < 0.15 (2490 MHz - 2700 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H12 698 - 960

Intermodulation products (dBm)

B Ba and nd 1 : 2 : 2 698 49 -9 0 - 2 60M 70 H 0M z Hz

24 5

DC-0018-2
Model: ACOMD2H12

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz z M H 60 M - 9 700 98 - 2 : 6 90 1 4 nd :2 Ba d 2 n Ba

6 24

DC-0039-2
Model: ACOMD2H20
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H20
B Ba and nd 1 : 2 : 2 698 49 -9 0 - 2 60M 70 H 0M z Hz

24 7

DC-0039-2
Model: ACOMD2H20
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 < 0.15 (698 MHz - 960 MHz) < 0.15 (2490 MHz - 2700 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H20 698 - 960

Intermodulation products (dBm)

Hz z M H 60 M - 9 700 98 - 2 : 6 90 1 4 nd :2 Ba d 2 n Ba

8 24

DC-0039-2
Model: ACOMD2H20
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba and nd 1 : 2 : 2 698 49 -9 0 - 2 60M 70 H 0M z Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

24 9

DC-0010-2
Model: ACOMD2H00

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H00
Hz z M H 60 M - 9 700 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

0 25

DC-0010-2
Model: ACOMD2H00

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1710 - 2700 Typ. < 0.2 (698 MHz - 960 MHz) Typ. < 0.25 (1710 MHz - 2700 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H00 698 - 960

Intermodulation products (dBm)

B Ba and nd 1 : 2 : 1 698 71 -9 0 - 2 60M 70 H 0M z Hz

25 1

DC-0010-2
Model: ACOMD2H00

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz z M H 60 M - 9 700 98 - 2 : 6 10 1 7 nd :1 Ba d 2 n Ba

2 25

DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H02
Ba Ba nd 1 nd :7 2 : 1 90 -1 92 8 0 - 2 80 20 MH 0M z Hz

25 3

DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1920 - 2200 Typ. < 0.15 (790 MHz - 960 MHz) Insertion loss* (dB) Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 6 40 - 135 Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H02 790 - 1880

Intermodulation products (dBm)

Hz 0M Hz 88 0M - 1 20 90 -2 : 7 20 1 9 :1 nd Ba d 2 n Ba

4 25

DC-0003-2
Model: ACOMD2H02
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Ba Ba nd 1 nd :7 2 : 1 90 -1 92 8 0 - 2 80 20 MH 0M z Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

25 5

DC-0040-2
Model: ACOMD2H21
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H21
Hz 0M Hz 88 0M - 1 20 90 -2 : 7 20 1 9 :1 nd Ba d 2 n Ba

6 25

DC-0040-2
Model: ACOMD2H21
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1920 - 2200 < 0.15 (790 MHz - 960 MHz) Insertion loss* (dB) < 0.25 (1710 MHz -1880 MHz) < 0.25 (1920 MHz - 2200 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 5.5 6.4 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H21 790 - 1880

Intermodulation products (dBm)

Ba Ba nd 1 nd :7 2 : 1 90 -1 92 8 0 - 2 80 20 MH 0M z Hz

25 7

DC-0040-2
Model: ACOMD2H21
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


Hz 0M Hz 88 0M - 1 20 90 -2 : 7 20 1 9 :1 nd Ba d 2 n Ba

Issue: 2013-01-08

8 25

DC-0026-2 DC-0022-2

Model: ACOMD2H06 Model: ACOMD2H08

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H06

ACOMD2H08
Ba Ba nd nd 1 : 1 2 : 1 710 92 -1 0 - 2 880 M 20 0M Hz Hz

25 9

DC-0026-2 DC-0022-2

Model: ACOMD2H06 Model: ACOMD2H08

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1920 - 2200 Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 160 x 154 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 4.8 5.7 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMD2H06 1710 - 1880 ACOMD2H08

Intermodulation products (dBm)

Hz 0M Hz 88 M - 1 200 0 -2 71 : 1 920 1 1 nd 2 : Ba nd Ba

0 26

DC-0026-2 DC-0022-2

Model: ACOMD2H06 Model: ACOMD2H08

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Ba Ba nd nd 1 : 1 2 : 1 710 92 -1 0 - 2 880 M 20 0M Hz Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

26 1

DC-0012-2 DC-0021-2

Model: ACOMD2H05 Model: ACOMD2H07

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H05
Hz 0M Hz 88 M - 1 200 0 -2 71 : 1 920 1 1 nd 2 : Ba nd Ba

ACOMD2H07

2 26

DC-0012-2 DC-0021-2

Model: ACOMD2H05 Model: ACOMD2H07

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 1920 - 2200 Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 160 x 154 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 4.8 5.7 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMD2H05 1710 - 1880 ACOMD2H07

Intermodulation products (dBm)

Ba Ba nd nd 1 : 1 2 : 1 710 92 -1 0 - 2 880 M 20 0M Hz Hz

26 3

DC-0012-2 DC-0021-2

Model: ACOMD2H05 Model: ACOMD2H07

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


Hz 0M Hz 88 M - 1 200 0 -2 71 : 1 920 1 1 nd 2 : Ba nd Ba

Issue: 2012-10-26

4 26

DC-0024-2
Model: ACOMD2L04

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2L04
Ba Ba nd nd 1 : 1 2 : 2 710 49 -2 0 - 2 200 M 70 0M Hz Hz

26 5

DC-0024-2
Model: ACOMD2L04

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 Typ. < 0.15 (1710 MHz - 2200 MHz) Typ. < 0.15 (2490 MHz - 2700 MHz) By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 3.2 4.2 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2L04 1710 - 2200

Intermodulation products (dBm)

Hz 0M Hz 20 M - 2 700 0 -2 71 : 1 490 1 2 nd 2 : Ba nd Ba

26

DC-0024-2
Model: ACOMD2L04

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Ba Ba nd nd 1 : 1 2 : 2 710 49 -2 0 - 2 200 M 70 0M Hz Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

26

DC-0006-2
Model: ACOMD2L03

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2L03
Hz 0M Hz 20 M - 2 700 0 -2 71 : 1 490 1 2 nd 2 : Ba nd Ba

8 26

DC-0006-2
Model: ACOMD2L03

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 Typ. < 0.15 (1710 MHz - 2200 MHz) Typ. < 0.15 (2490 MHz - 2700 MHz) By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 3.2 4.2 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2L03 1710 - 2200

Intermodulation products (dBm)

Ba Ba nd nd 1 : 1 2 : 2 710 49 -2 0 - 2 200 M 70 0M Hz Hz

26 9

DC-0006-2
Model: ACOMD2L03

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.


Hz 0M Hz 20 M - 2 700 0 -2 71 : 1 490 1 2 nd 2 : Ba nd Ba

Issue: 2012-10-26

0 27

DC-0034-2
Model: ACOMD2H16
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H16
Ba Ba nd nd 1 : 1 2 : 2 710 49 -2 0 - 2 200 M 70 0M Hz Hz

27 1

DC-0034-2
Model: ACOMD2H16
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2490 - 2700 < 0.15 (1710 MHz - 2200 MHz) < 0.15 (2490 MHz - 2700 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 3.2 4.2 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMD2H16 1710 - 2200

Intermodulation products (dBm)

Hz 0M Hz 20 M - 2 700 0 -2 71 : 1 490 1 2 nd 2 : Ba nd Ba

2 27

DC-0034-2
Model: ACOMD2H16
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Ba Ba nd nd 1 : 1 2 : 2 710 49 -2 0 - 2 200 M 70 0M Hz Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

27 3

DC-0030-2
Model: ACOMD2L05
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2L05

nd Ba 1 Hz 0M 66 -2 z 20 MH 5 26 0/ 259 54 - 2 75 5 0 :2 50 :2 d2 n Ba

4 27

DC-0030-2
Model: ACOMD2L05
Preliminary Issue
Electrical Properties Band 1 Pass band (MHz) Band 2 Band 3 Band 1 Insertion loss* (dB) Band 2 Band 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 2500 - 2540 2620 - 2660 2575 - 2595 < 0.6 (2500 MHz - 2540 MHz) < 0.6 (2620 MHz - 2660 MHz) < 0.65 (2575 MHz - 2595 MHz) By-pass (max. 2500 mA) Stop < 60 < 1.28 < 250 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (Long neck) Wall mounting // Mast mounting Double Unit: 7.8 Default: 40 - 135 Double Unit: 250 x 176 x 103 (without connectors, without mounting brackets) -40 .. +65 Indoor // outdoor IP67 10 (8/20 us)

Intermodulation products (dBm)

Ba nd

27 5

1 : Ba 250 0 nd -2 2 : 2 54 57 0/2 5 6 - 2 20 59 5M 266 Hz 0M Hz

DC-0030-2
Model: ACOMD2L05
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

nd Ba 1

Hz 0M 66 -2 z 20 MH 5 26 0/ 259 54 - 2 75 5 0 :2 50 :2 d2 n Ba

6 27

4-DC-X0Y0-WL1
Model: ACOMD2H25

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

4-DC-X0Y0-WL1
Ba Ba nd nd 1 : 2 2 : 2 614 58 -2 2 - 2 624 M 60 2M Hz Hz

27 7

4-DC-X0Y0-WL1
Model: ACOMD2H25

Electrical Properties Model Band LTE TDD Pass band (MHz) Band WiMAX Port LTE TDD Port COM Insertion loss* (dB) Port WiMAX Port COM Port LTE TDD Port COM DC/AISG transparency Port WiMAX Port COM Isolation (dB) VSWR Input power (W) Port LTE TDD, Port WiMAX Stop > 30 < 1.25 < 60 < -97 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector 361 x 158.2 x 120 (with connectors, with mounting brackets) 485 x 440 x 242 5.7 7.0 Wall mounting // Mast mounting Default: 30 - 127 N-Female -40 +65 Indoor // Outdoor IP67 10 (8/20 us) < 0.25 (1710 MHz - 1880 MHz) Stop 2614 - 2624 < 0.15 (790 MHz - 960 MHz) ACOMD2H25 2582 - 2602

Intermodulation products (dBm)

Hz 4M Hz 62 M - 2 602 4 -2 61 : 2 582 1 2 nd 2 : Ba nd Ba

8 27

4-DC-X0Y0-WL1
Model: ACOMD2H25

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Ba Ba nd nd 1 : 2 2 : 2 614 58 -2 2 - 2 624 M 60 2M Hz Hz

Any previous catalogue issues become invalid. Issue: 2012-10-26

27 9

TC-0028-2
Model: ACOMT2H04

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2H04
Hz M Hz z 60 M H - 9 960 00M 90 - 2 : 7 80 - 2 1 : 8 10 nd 2 17 Ba and 3 : B nd Ba

0 28

TC-0028-2
Model: ACOMT2H04

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Port 1 Port 2 Isolation (dB) Port 2 Port 3 Port 1 Port 3 VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H04 790 - 862 880 - 960 1710 - 2200 < 0.3 (790 MHz - 862 MHz) < 0.25 (880 MHz - 960 MHz) < 0.15 (1710 MHz - 2200 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 50 > 70 > 70 < 1.24 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (Long neck) Wall mounting // Mast mounting Double Unit: 7.5 Default: 40 - 135 Double Unit: 220 x 210 x 115 (without connectors, without mounting brackets) -40 .. +65 Indoor // outdoor IP67 10 (8/20 us)

Intermodulation products (dBm)

28 1

Ba Ba Ban nd nd d 1 : 3 2 : 790 : 1 88 71 0 9 0 - 9 60 - 2 60 M 20 M Hz 0M Hz Hz

TC-0028-2
Model: ACOMT2H04

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz M Hz z 60 M H - 9 960 00M 90 - 2 : 7 80 - 2 1 : 8 10 nd 2 17 Ba and 3 : B nd Ba

2 28

TC-0011-2 TC-0015-2

Model: ACOMT2H00 Model: ACOMT2H02

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2H00

ACOMT2H02

28 3

B Ba Ba and nd nd 2 1 : 3 : 1 790 : 1 71 92 0 9 0 - 1 60 - 2 88 M 20 0M Hz 0M H Hz z

TC-0011-2 TC-0015-2

Model: ACOMT2H00 Model: ACOMT2H02

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H00 790 - 960 1710 - 1880 1920 - 2200 Typ. < 0.15 (790 MHz - 960 MHz) Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Stop Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 6.3 7.3 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) Stop By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMT2H02

Intermodulation products (dBm)

Hz z M H z 60 0M H - 9 188 00M 90 - 2 : 7 10 - 2 1 17 20 nd 2 : 19 Ba nd 3 : Ba and B

4 28

TC-0011-2 TC-0015-2

Model: ACOMT2H00 Model: ACOMT2H02

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba Ba and nd nd 2 1 : 3 : 1 790 : 1 71 92 0 9 0 - 1 60 - 2 88 M 20 0M Hz 0M H Hz z

Any previous catalogue issues become invalid. Issue: 2012-10-26

www.huawei.com

28 5

TC-0025-2 TC-0016-2

Model: ACOMT2H01 Model: ACOMT2H03

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2H01

ACOMT2H03

Hz z M H z 60 0M H - 9 188 00M 90 - 2 : 7 10 - 2 1 17 20 nd 2 : 19 Ba nd 3 : Ba and B

6 28

TC-0025-2 TC-0016-2

Model: ACOMT2H01 Model: ACOMT2H03

Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H01 790 - 960 1710 - 1880 1920 - 2200 Typ. < 0.15 (790 MHz - 960 MHz) Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Stop Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 6.3 7.3 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) Stop By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMT2H03

Intermodulation products (dBm)

28 7

B Ba Ba and nd nd 2 1 : 3 : 1 790 : 1 71 92 0 9 0 - 1 60 - 2 88 M 20 0M Hz 0M H Hz z

TC-0025-2 TC-0016-2

Model: ACOMT2H01 Model: ACOMT2H03

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26


Hz z M H z 60 0M H - 9 188 00M 90 - 2 : 7 10 - 2 1 17 20 nd 2 : 19 Ba nd 3 : Ba and B

8 28

DC-0041-2
Model: ACOMT2H08
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2H08
B Ba Ba and nd nd 2 1 : 3 : 1 790 : 1 71 92 0 9 0 - 1 60 - 2 88 M 20 0M Hz 0M H Hz z

28 9

DC-0041-2
Model: ACOMT2H08
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H08 790 - 960 1710 - 1880 1920 - 2200 < 0.15 (790 MHz - 960 MHz) < 0.25 (1710 MHz - 1880 MHz) < 0.25 (1920 MHz - 2200 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 6.3 7.3 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)

Intermodulation products (dBm)

Hz z M H z 60 0M H - 9 188 00M 90 - 2 : 7 10 - 2 1 17 20 nd 2 : 19 Ba nd 3 : Ba and B

0 29

DC-0041-2
Model: ACOMT2H08
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba Ba and nd nd 2 1 : 3 : 1 790 : 1 71 92 0 9 0 - 1 60 - 2 88 M 20 0M Hz 0M H Hz z

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

29 1

TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2M00
Hz z 0M MH z 88 00 MH - 1 22 00 90 0 - 27 :7 2 1 : 19 90 nd 2 24 Ba nd 3 : Ba and B

2 29

TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 Typ. < 0.25 (1920 MHz - 2200 MHz) Typ. < 0.2 (2490 MHz - 2700 MHz) Stop By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 7 40 - 135 Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) ACOMT2M00 790 - 1880 1920 - 2200 2490 - 2700 Typ. < 0.15 (790 MHz - 960 MHz) Typ. < 0.25 (1710 MHz - 1880 MHz)

Intermodulation products (dBm)

29 3

B B an Ba and d 1 nd 2 : 7 3 : 1 90 : 2 92 49 0 18 0 - 2 80 - 2 20 M 70 0M Hz 0M H Hz z

TC-0009-2
Model: ACOMT2M00
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


Hz z 0M MH z 88 00 MH - 1 22 00 90 0 - 27 :7 2 1 : 19 90 nd 2 24 Ba nd 3 : Ba and B

4 29

TC-0043-2
Model: ACOMT2M09
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMT2M09
B Ba Ba and nd nd 2 1 : 3 : 1 698 : 2 71 49 0 9 0 - 2 60 - 2 20 M 70 0M Hz 0M H Hz z

29 5

TC-0043-2
Model: ACOMT2M09
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2M09 698 - 960 1710 - 2200 2490 - 2700 < 0.15 (698 MHz - 960 MHz) < 0.25 (1710 MHz - 2200 MHz) < 0.2 (2490 MHz - 2700 MHz) By-pass (max. 2500 mA) By-pass (max. 2500 mA) By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) 400 x 340 x 240 Double Unit: 7.3 8.7 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)

Intermodulation products (dBm)

Hz z M H z 60 0M H - 9 220 00M 98 - 7 : 6 10 - 2 1 17 90 nd 2 : 24 Ba nd 3 : Ba and B

6 29

TC-0043-2
Model: ACOMT2M09
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B Ba Ba and nd nd 2 1 : 3 : 1 698 : 2 71 49 0 9 0 - 2 60 - 2 20 M 70 0M Hz 0M H Hz z

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

29 7

QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMQ2M00
Hz z M H z 60 0M H z - 9 88 0M H 90 -1 20 0M : 7 10 - 2 70 1 17 20 - 2 nd 2 : 19 90 Ba nd 3 : 24 : Ba nd 4 Ba and B

8 29

QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Electrical Properties Model Band 1 Band 2 Pass band (MHz) Band 3 Band 4 Port 1 Port 5 Insertion loss* (dB) Port 2 Port 5 Port 3 Port 5 Port 4 Port 5 Port 1 Port 5 Port 2 Port 5 DC/AISG transparency Port 3 Port 5 Port 4 Port 5 Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 3, Port 4 By- pass (max. 2500 mA) stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 7.5 40 - 135 Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) -40 .. +65 Indoor // Outdoor IP67 10 (8/20 us) 1920 - 2200 2490 - 2700 Typ. < 0.15 (790 MHz - 960 MHz) Typ. < 0.25 (1710 MHz - 1880 MHz) Typ. < 0.25 (1920 MHz - 2200 MHz) Typ. < 0.2 (2490 MHz - 2700 MHz) Stop Stop ACOMQ2M00 790 - 960 1710 - 1880

Intermodulation products (dBm)

29 9

B B a B an nd Ba and d 2 1 : nd 3 : 1 79 4 : 1 71 0 : 2 92 0 96 49 0 -18 0M 0 - 2 80 H - 2 20 M z 70 0M H 0M H z Hz z

QC-0007-2
Model: ACOMQ2M00
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08


Hz z M H z 60 0M H z - 9 88 0M H 90 -1 20 0M : 7 10 - 2 70 1 17 20 - 2 nd 2 : 19 90 Ba nd 3 : 24 : Ba nd 4 Ba and B

0 30

QC-0032-2
Model: ACOMQ2H00
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes. y Feeder sharing available. y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMQ2H00
B B a B an nd Ba and d 2 1 : nd 3 : 1 79 4 : 1 71 0 : 2 92 0 96 49 0 -18 0M 0 - 2 80 H - 2 20 M z 70 0M H 0M H z Hz z

30 1

QC-0032-2
Model: ACOMQ2H00
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Band 4 Port 1 Port 5 Insertion loss* (dB) Port 2 Port 5 Port 3 Port 5 Port 4 Port 5 Port 1 Port 5 DC/AISG transparency Port 2 Port 5 Port 3 Port 5 Port 4 Port 5 Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 3, Port 4 ACOMQ2H00 790 - 960 1710 - 1880 1920 - 2200 2490 - 2700 < 0.15 (790 MHz - 960 MHz) < 0.25 (1710 MHz - 1880 MHz) < 0.25 (1920 MHz - 2200 MHz) < 0.2 (2490 MHz - 2700 MHz) By- pass (max. 2500 mA) By- pass (max. 2500 mA) By- pass (max. 2500 mA) By- pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) 400 x 340 x 240 Double Unit: 7.5 8.9 Wall mounting // Mast mounting Default: 40 - 135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)

Intermodulation products (dBm)

Hz z M H z 60 0M H z - 9 88 0M H 90 -1 20 0M : 7 10 - 2 70 1 17 20 - 2 nd 2 : 19 90 Ba nd 3 : 24 : Ba nd 4 Ba and B

2 30

QC-0032-2
Model: ACOMQ2H00
Preliminary Issue

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
B B a B an nd Ba and d 2 1 : nd 3 : 1 79 4 : 1 71 0 : 2 92 0 96 49 0 -18 0M 0 - 2 80 H - 2 20 M z 70 0M H 0M H z Hz z

Any previous catalogue issues become invalid. Issue: 2013-01-08

www.huawei.com

30 3

DS-0042-1
Model: ADCSTOP00
Preliminary Issue
Features y Used to isolate DC voltage from port 1 to port 2. y Low passive intermodulation products, low insertion loss and high power capacity. y Ultra wide band design for various communication system. y Small volume, light weight.

Dimension gure

ACOMQ2M00
Hz z M H z 60 0M H z - 9 88 0M H 90 -1 20 0M : 7 10 - 2 70 1 17 20 - 2 nd 2 : 19 90 Ba nd 3 : 24 : Ba nd 4 Ba and B

4 30

DS-0042-1
Model: ADCSTOP00
Preliminary Issue
Electrical Properties Model Frequency range (MHz) Insertion loss (dB) Isolation for DC signal (dB) VSWR Input power (W) RF Impedance () Intermodulation products (dBc) Port 1 Port 2 Port 1 Port 2 Port 1 and Port 2 Port 1 and Port 2 ADCSTOP00 698 - 2690 0.1 (698 - 960 MHz // 1710 - 2690 MHz) 0.15 (960 - 1710 MHz) 70 1.15 (698 - 960 MHz // 1710 - 2690 MHz) 1.2 (960 - 1710 MHz) Avg. 500 (698 - 2690 MHz) 50 < -160 (2 x 43 dBm carrier) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) BT net Weight (kg) Packing weight (kg) Port 1 Connectors Port 2 7/16 DIN Female 39 x 151 x 45 78 x 185 x 58 < 0.56 < 0.60 7/16 DIN Male -40 +70 Indoor // Outdoor IP66 3 (10/350 us)

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
D : 6 C-S 98 TO -2 P 70 0M Hz

Any previous catalogue issues become invalid. Issue: 2013-01-08

30 5

Ba nd

Accessories for RET Systems

Antenna and RCU configuration list

AISG 1.1 RCU AISG 2.0 Antenna Model Single Band A90451704 A19452101

ARCU01104 ARCU02001 A19451703 A25451803 A25451804

AISG 1.1 RCU AISG 2.0 A70451501 A79451600v01 Single Band A26451500 A25451805 ADU4515R0 ADU4518R3 Dual-band Antenna Model ADU451611 ADU4518R5 ATR451500 Triple-band ATR451713 ATR451606 Quad-band Penta-band AQU4518R0 APE4517R2 ADU451712 ADU451507 ATR451602v01 ATR4517R0 ATR451607 AQU4518R1 ADU4518C0 A19451902 A264518S0 ADU4516R0 ADU451807v01 ADU451820 A70451600 A79451700v01

ARCU01109 ARCU02004 A70451700 A19451505 A26451800v01 A70451500 A19451811 A264518R0 A79451500v01 A194518R0 A26451900v01

ADU4517R0 ADU4518R0 ADU451821 ADU451819 ADU451816v01 ATR4516R0 ATR4518R4 ATR4518R9

ADU451503 ADU4517C0 ADU451716 ADU4518R1 ADU4518R6 ATR451704v01 ATR4518R7 ATR4518R3

ADU451602v01 ADU4518C1 ADU451604 ADU451902 ADU451901v01 ATR451612 ATR451709 ATR451714

30 7

RC U

RCU
Model: ARCU01104 (AISG 1.1) ARCU02001 (AISG 2.0)

RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.

Input voltage range (V) Current (mA) Adjustment time (full range) (min) Calibration time (min) Connectors Pin assignment according AISG Housing material Color Weight (g) Operating temperature range () Protection class Dimensions (L x W x H) (mm) Packing size (L x W x H) (mm) 1 DC 2 n/c

DC 10 - 30 < 600 (motor activated) < 50 (stand by) <2 <4 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male // Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A Grey 600 -40 .. +65 IP24 200 x 56 x 47 268 x 105 x 95 6 7 8 n/c DC in/out DC return

Prole: Aluminium coated / Cover: Aluminium coated

Daisy chain in: Male Daisy chain out: Female

Drainage Hole

Drainage Hole

Appearance

Bottom view of RCU

Male

Female

HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

U RC 8 30

RCU
Model: ARCU01109 (AISG 1.1) ARCU02004 (AISG 2.0)

RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.

Input voltage range (V) Current (mA) Adjustment time (full range) (min) Calibration time (min) Connectors Pin assignment according AISG Housing material Color Weight (g) Operating temperature range () Protection class Lightning protection (kA) Dimensions (L x W x H) (mm) Packing size (L x W x H) (mm) 1 DC 2 n/c

DC 10 - 30 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A 6 7 8 n/c DC in/out DC return

Prole: Aluminium coated / Cover: Aluminium coated RAL 7035 600 -40 .. +65 IP24 AISG interface (each pin) 3 (10/350 s) 10 (8/20 s) 180 x 65 x 54 268 x 105 x 95

Standards:

EN 60950-1 (Safety) EN 55022 (Emission) EN 55024 (Immunity) ETSI EN300386 (1.4.1) FCC part15 Certication: CEFCCRoHSWEEE
Daisy chain in: Male

HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.

Daisy chain out: Female

Drainage Hole

Appearance

Bottom view of RCU

Male

Female

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

30 9

RC U

BT-690-2700-001
Model: ABT000001

Features y y y y y Used to feed DC voltage and OOK control signals into the feeder cable. Low passive intermodulation products, low insertion loss and high power capacity. Ultra wide band design for various communication system. Small volume, light weight. Support AISG 1.1 and AISG 2.0 protocol.

BT = Bias Tee BTS = Base Transceiver Station OOK = On Off Keying

Block Diagram

Port 2 (ANT)

DC/OOK

RF Block

DC Block

Port 1 (BTS)

BT 0 31

BT-690-2700-001
Model: ABT000001

Electrical Properties Frequency range (MHz) Insertion loss (dB) Port 1 Port 2 Port 1 Port 2 Isolation for DC signal (dB) Port 1 Port DC/OOK VSWR Port 1 and Port 2 1.15 (690 - 960 MHz / 1710 - 2690 MHz) 1.2 (960 - 1710 MHz) Avg. 500 (690 - 960 MHz) Avg. 250 (1710 - 2690 MHz) 2300 1 (when the current is 2300 mA) 0 .. +30 50 < -160 (2 x 43 dBm carrier) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) BT net Weight (kg) Packing weight (kg) Port 1 (BTS) Connectors Port 2 (Antenna) Port DC/OOK 48.5 x 151 x 45 (with connectors) 78 x 185 x 58 < 0.56 < 0.60 7/16 DIN Male 7/16 DIN Female SMA Female -40 .. +70 Indoor or outdoor IP66 3 (10/350 us) 70 690 - 2700 0.1 (690 - 960 MHz / 1710 - 2690 MHz) 0.15 (960 - 1710 MHz)

Input power (W) Input current (mA) DC voltage reduction (V) DC supply voltage (V) RF Impedance () Intermodulation products (dBc)

Port 1 and Port 2 Port DC/OOK Port 2 Port DC/OOK Port 2

31 1

BT

BT-690-2700-001
Model: ABT000001

Unit: mm

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

BT 2 31

SBT-690-2700-001 SBT-690-2700-002

Model: ASBT00001 Model: ASBT00002

Features y Convert signals between OOK and RS485. y Low passive intermodulation products, low insertion loss and high power capacity. y Ultra wide band design for various communication system. y Small volume, light weight. y Support AISG 1.1 and AISG 2.0 protocol.

SBT = Smart Bias Tee RCU = Remote Control Unit for remote electrical control of antenna tilt BTS = Base Transceiver Station AISG= Antenna Interface Standards Group

ASBT00001

ASBT00002

Block Diagram

SB 31 3

SBT-690-2700-001 SBT-690-2700-002

Model: ASBT00001 Model: ASBT00002

Model Port 1 (Connector type) Port 2 (Connector type) Port AISG

ASBT00001 Antenna (7 - 16 DIN Male) Feeder (7 - 16 DIN Female) AISG (8-pin Connecter Female)

ASBT00002 BTS (7 - 16 DIN Male) Feeder (7 - 16 DIN Female) AISG (8-pin Connecter Male)

Electrical Properties Frequency range (MHz) Insertion loss (dB) Isolation for DC signal (dB) VSWR Input power (W) DC supply voltage (V) RF impedance () Intermodulation products (dBc) Power consumption (W) Modem carrier frequency (MHz) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) SBT net Weight (kg) Packing weight (kg) 75 x 160 x 45 (with connectors) 78 x 185 x 58 < 0.75 < 0.80 -40 .. +70 Indoor or outdoor IP67 3 (10/350 us) Port 1 Port 2 Port 1 Port 2 Port 1 Port AISG Port 1 and Port 2 Port 1 and Port 2 Port AISG 690 - 2700 0.1 (690 - 960 MHz / 1710 - 2690 MHz) 0.15 (960 - 1710 MHz) 70 1.15 (690 - 960 MHz / 1710 - 2690 MHz) 1.2 (960 - 1710 MHz) Avg. 500 (690 - 960 MHz) / Avg. 250 (1710 - 2690 MHz) < 2.5 A (+8 +30 V DC) +8 .. +30 50 < -160 (3rd order, 2 x 43 dBm) Typ. 0.6 2.176

SB T 4 31

SBT-690-2700-001 SBT-690-2700-002

Model: ASBT00001 Model: ASBT00002

Unit: mm ASBT00001

Unit: mm ASBT00002

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a SBT. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

SB 31 5

AISG Connecting Cables For Remote Electrical Tilt (RET) System

Technical Specication Connectors Cable Rate current Protection Class Temperature Range Color Single Bend radius Multiple Bend radius Application scene 2 x 8 pin connector according to IEC 60130-9 Female / Male 2 x 0.25 mm2 + 4 x 0.75 mm2 cable according to UL2464 4A IP67 (Coupled) -40 ~ 80 Black 60 mm Min. 120 mm Min. Indoor // Outdoor

Pin Number 1 2 3 4 5 6 7 8

Signal +12 V DC Nominal N/C RS485 B N/C RS485 A 10 V - 30 V DC DC Return N/C

Female

Male

Cable series Length 0.5 m 2m 5m 10 m 15 m 30 m 50 m 60 m 70 m BOM Code 04045920 04045921 04050228 04050184 04045922 04050230 04050231 04050182 04050232

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

AI SG 6 31

AISG Connecting Cables For RRU RET_Port

Technical Specication Connector 1 Connector 2 Cable Rate current Protection Class Temperature Range Color Single Bend radius Multiple Bend radius Application scene 8 pin connector according to IEC 60130-9 Female 9 pin DB9 connector Male 4 Pair x 24 AWG 4A IP67 (Coupled) 40 ~ 80 Black 60 mm Min. 120 mm Min. Indoor // Outdoor

Pin Number 1 2 3 4 5 6 7 8 9

Signal Female +12 V DC nominal N/C RS485 B RS485 GND RS485 A 10 V - 30 V DC DC Return N/C / Male +12 V DC nominal N/C RS485 B RS485 GND RS485 A N/C N/C N/C DC Return

Female

Male

Cable series Length 3m BOM Code 04070193

5m

04070097

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2013-01-08

AI 31 7

SG

PCU
Model: APCU00001

PCU is a portable control unit for RCU of RET antennas. It supports AISG 1.1 and AISG 2.0 / 3GPP protocol. It is portable, lightweight and easy to use for site installation and maintenance personnel. It can be used as an adapter for USB/ RS485 to connect with PC, PC software via PCU remote control RCU.

PCU = Portable Control Unit RET = Remote Electrical Tilt RCU = Remote Control Unit

Specications Connectors to RCU Input voltage 1 x 8-pin female conforming to IEC 60130-9 AC/DC adapter Rechargeable battery Output voltage to RCU Rechargeable battery External power supply LCD USB LED RUN Power Protocol to RCU Interface to PC Max. number of RCU supported Max. length of control cable Temperature range () PCU dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) PCU net weight (kg) Packing weight (kg) 20 V DC, 1.5 A 16 V DC, 1.5 A

8-pin female: pin1 & pin6: 20 V DC, 1.5 A with external AC/DC adapter 8-pin female: pin1 & pin6: 16 V DC, 1.5 A with inner rechargeable battery Li-polymer (16 V, 2000 mAh), > 300 cycles Input: 100 - 240 V AC, 0.55 A, 50 Hz - 60 Hz Output: 20 V DC, 1.5 A 128 x 64 dot-matrix LCD, yellow-green backlight, 4 x 8 Chinese characters / 4 x 16 characters Indicating the status of USB connection Indicating the status of USB/RS485 communication Indicating the status of power supply AISG 1.1 and AISG 2.0 / 3GPP USB 2.0 6 pcs, depending on system conguration and length of control cable 50 m / 6 RCUs (in daisy chain conguration) -10 .. +55 168 x 90 x 44 340 x 275 x 75 0.45 (with inner rechargeable battery, without external power adapter) 1.30

Compliance to standards:

1. Compliant with AISG 1.1 and AISG 2.0 / 3GPP 2. EMC: Emission: Conducted emission (EN 55022, 150 kHz - 30 MHz Class B) Immunity: Conducted susceptibility (IEC 61000-4-6, 150 kHz - 30 MHz)

PC U 8 31

PCU
Model: APCU00001

PCU is used as a RCU controller

(1) RET Antenna (2) RCU (3) RF Feeder Cable (4) AISG Cable (5) Site (6) PCU

PCU is used as a USB/RS485 adapter

(1) RET Antenna (2) RCU (3) RF Feeder Cable (4) AISG Cable (5) Site (6) PCU (7) USB Cable (8) PC

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

PC 31 9

Mounting Instructions

MET Antenna with H-Brackets Installation Guide (A)


Part Number: 31043740 Issue: 03

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS) Inclinometer 16 mm combination wrench (2 PCS) M10 (4 PCS)

(1 PCS)

(1 PCS)

(2 PCS)

Assemble the bracket

Install the bracket

Up bracket

Follow the directions shown in the picture to install brackets.

Down bracket

In Gu sta id llat e io 32 n

ET

MET Antenna with H-Brackets Installation Guide


Part Number: 31043740 Issue: 03

3
1

Manually adjust the electrical downtilt angle 2 3


The RCU is optional. For details about how to install Ruler Before adjustment Adjust angle After adjustment the RCU, see the relevant RCU Installation Guide.

Install the antenna 1 2

Ensure the bracket is fully collapsed at 0.

Adjust the mechanical downtilt angle


Method 1

Scale of bracket (the actual scale prevails) Finally, tighten all the nuts.

Method 2

Precise measurement

Recommended torque: M8 = 20 Nm, M10 = 30 Nm

Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.

M ET In st Gu

Issue: 2012-10-26

tio la al e id n

2 32

MET Antenna with L-Brackets Installation Guide


Part Number: 31043744 Issue: 02

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS)

Inclinometer

(1 PCS)

M8 (2 PCS)

(1 PCS)

(1 PCS)

Assemble the bracket

2
1

Install the bracket 2

In Gu sta id llat e io 32 n

ET

MET Antenna with L-Brackets Installation Guide


Part Number: 31043744 Issue: 02

3
1

Manually adjust the electrical downtilt angle 2 3


The RCU is optional. For details about how to install Ruler Before adjustment Adjust angle After adjustment the RCU, see the relevant RCU Installation Guide.

Install the antenna 1

Ensure the bracket is fully collapsed at 0.

Adjust the mechanical downtilt angle


Method 1 Scale of bracket

Finally, tighten all the nuts. Method 2 Precise measurement Recommended torque: M8 = 18 Nm Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.

M ET In st Gu

Issue: 2012-10-26

tio la al e id n

4 32

MET Antenna with H-Brackets Installation Guide (B)


Part Number: 31043745 Issue: 02

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

3. The RCU is optional. For details about how to install the RCU, see the relevant RCU Installation Guide.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS) Inclinometer 16 mm combination wrench (2 PCS) M10 (4 PCS)

(1 PCS)

(1 PCS)

(2 PCS)

Assemble the bracket

Install the bracket

Up bracket

Follow the directions shown in the picture to install brackets.

Down bracket

In Gu sta id llat e io 32 n

ET

MET Antenna with H-Brackets Installation Guide


Part Number: 31043745 Issue: 02

3
1

Manually adjust the electrical downtilt angle 2 3 4

Turn 180 Ruler Protection cap Twist off protective cap Adjust angle After adjustment, overturn the protection cap and tighten it.

Install the antenna 1 2

Ensure the bracket is fully collapsed at 0.

Adjust the mechanical downtilt angle


Method 1 Scale of bracket (the actual scale prevails) Finally, tighten all the nuts. Method 2 Precise measurement Recommended torque: M8 = 20 Nm, M10 = 30 Nm Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid.

M ET In st Gu

Issue: 2012-10-26

tio la al e id n

6 32

RET Antenna with L-Brackets Installation Guide


Part Number: 31043749 Issue: 02

HINT 1. The packing materials of antennas cannot be removed on transportation. 2. Only qualied personnel are allowed to install the antenna. 3. Appearance of the actual antenna may differ from the pictures. 4. The RET SN attached to the antenna nameplate is the same with the RET SN on the antenna installation recording form. To avoid RET SN confusion, do not separate the antenna from the antenna installation recording form.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS)

Inclinometer

(1 PCS)

M8 (2 PCS)

(1 PCS)

(1 PCS)

Assemble the bracket

2
1

Install the bracket 2

In s Gu tal id lat io e 32 n

RE

RET Antenna with L-Brackets Installation Guide


Part Number: 31043749 Issue: 02

Connect the AISG Cable

Align the convex of the antenna AISG male connector with the concave of the AISG female connector correctly, press the connectors together, and then secure them by hand properly. For details, see step 2.

AISG Male

Protective lid

1. Do not remove the protective lid from the antenna AISG female. 2. Connect the other connector of the AISG cable to the SBT, TMA or RRU.

Remove the AISG protective lid.

Connect the AISG cable.

Tighten the AISG cable.

Write Down the Information


CAUTION 1. In the daisy chain scenario, must write down the information in recording form. 2. Before the lling, please ensure the RET SN attached to the antenna nameplate is the same as the RET SN on the antenna installation recording form.

2 Example

Packaging bag

Recording form

Taking out the recording form packaging bag.

According to the actual situation to ll in the recording form.

Install the antenna 1

Ensure the bracket is fully collapsed at 0.

T RE In st al n tio la e Gu id

8 32

RET Antenna with L-Brackets Installation Guide


Part Number: 31043749 Issue: 02

Adjust the mechanical downtilt angle


Method 1 Scale of bracket

Finally, tighten all the nuts. Method 2 Precise measurement Recommended torque: M8 = 18 Nm Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Adjust the mechanical downtilt angle a In the non-daisy chain scenario, an RET antenna connects with one AISG cable. b In the daisy chain scenario, connect each RET antenna to an AISG cable, then connect the female connector of the upper-level
RET antenna to the male connector of the lower-level RET antenna with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RET antenna.

Non-Daisy Chain Scenario

Daisy Chain Scenario

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

In s Gu tal id lat io e 32 n

RE

RET Antenna with H-Brackets Installation Guide


Part Number: 31043750 Issue: 02

HINT 1. The packing materials of antennas cannot be removed on transportation. 2. Only qualied personnel are allowed to install the antenna. 3. Appearance of the actual antenna may differ from the pictures. 4. The RET SN attached to the antenna nameplate is the same with the RET SN on the antenna installation recording form. To avoid RET SN confusion, do not separate the antenna from the antenna installation recording form.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS) Inclinometer 16 mm combination wrench (2 PCS) M10 (4 PCS)

(1 PCS)

(1 PCS)

(2 PCS)

Assemble the bracket

Install the bracket

Up bracket

Follow the directions shown in the picture to install brackets.

Down bracket

T RE In st al n tio la e Gu id

0 33

RET Antenna with H-Brackets Installation Guide


Part Number: 31043750 Issue: 02

Connect the AISG Cable

Align the convex of the antenna AISG male connector with the concave of the AISG female connector correctly, press the connectors together, and then secure them by hand properly. For details, see step 2.

AISG Male

Protective lid

1. Do not remove the protective lid from the antenna AISG female. 2. Connect the other connector of the AISG cable to the SBT, TMA or RRU.

Remove the AISG protective lid.

Connect the AISG cable.

Tighten the AISG cable.

Write Down the Information


CAUTION 1. In the daisy chain scenario, must write down the information in recording form. 2. Before the lling, please ensure the RET SN attached to the antenna nameplate is the same as the RET SN on the antenna installation recording form.

2 Example

Packaging bag

Recording form

Taking out the recording form packaging bag.

According to the actual situation to ll in the recording form.

Install the antenna 1 2

Ensure the bracket is fully collapsed at 0.

In s Gu tal id lat io e 33 n

RE

RET Antenna with H-Brackets Installation Guide


Part Number: 31043750 Issue: 02

Adjust the mechanical downtilt angle


Method 1

Scale of bracket (the actual scale prevails) Finally, tighten all the nuts.

Method 2

Precise measurement

Recommended torque: M8 = 20 Nm, M10 = 30 Nm

Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Adjust the mechanical downtilt angle a In the non-daisy chain scenario, an RET antenna connects with one AISG cable. b In the daisy chain scenario, connect each RET antenna to an AISG cable, then connect the female connector of the upper-level
RET antenna to the male connector of the lower-level RET antenna with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RET antenna.

Non-Daisy Chain Scenario

Daisy Chain Scenario

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

T RE In st Gu id

al n

tio la e

2 33

FET Antenna with H-Brackets Installation Guide


Part Number: 31043746 Issue: 02

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS) Inclinometer 16 mm combination wrench (2 PCS) M10 (4 PCS)

(1 PCS)

(1 PCS)

(2 PCS)

Assemble the bracket

Install the bracket

Up bracket

Follow the directions shown in the picture to install brackets.

Down bracket

In s Gu tal id lat io e 33 n

FE T

FET Antenna with H-Brackets Installation Guide


Part Number: 31043746 Issue: 02

Install the antenna 1 2

Ensure the bracket is fully collapsed at 0.

Adjust the mechanical downtilt angle

Method 1

Scale of bracket (the actual scale prevails) Finally, tighten all the nuts.

Method 2

Precise measurement

Recommended torque: M8 = 20 Nm, M10 = 30 Nm

Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

FE T In st Gu id e

al la n tio

33 4

FET Antenna with L-Brackets Installation Guide


Part Number: 31043747 Issue: 02

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

Installation Tools

Bracket Subassembly

13 mm combination wrench (2 PCS)

Inclinometer

(1 PCS)

M8 (2 PCS)

(1 PCS)

(1 PCS)

Assemble the bracket

2
1

Install the bracket 2

In s Gu tal id lat io e 33 n

FE

FET Antenna with L-Brackets Installation Guide


Part Number: 31043747 Issue: 02

Install the antenna 1

Ensure the bracket is fully collapsed at 0.

Adjust the mechanical downtilt angle


Method 1 Scale of bracket

Finally, tighten all the nuts. Method 2 Precise measurement Recommended torque: M8 = 18 Nm Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

T FE In st Gu id

al n

tio la e

6 33

Tri-sector Cluster Antenna Installation Guide


Part Number: 31043751 Issue: 01

HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.

Installation Tools

Fittings

13 mm combination wrench (2 PCS)

300 x 36 mm Adjustable wrench

16 mm combination wrench (2 PCS)

Phillips screwdriver

Hoisting ring

Lightning rod

Bolt

Preparation before Installation 1 2

Install the hoisting ring on top of the antenna.

Tighten the hoisting ring.

Loosen the screw xing the protective cover.

Lift the shield up to the position shown by the arrow.


st lu or C ct se Tr ial la In st tio n Gu id e er

33 7

Tri-sector Cluster Antenna Installation Guide


Part Number: 31043751 Issue: 01

Installing a Cluster Antenna without SBT 1 2 3

Remove all protective caps from all DIN connectors and Tilt ports.

Install RF jumpers.

Install the RCU. For details about how to install the RCU, see the RCU Installation Guide.

Non-Daisy Chain Scenario

Daisy Chain Scenario

Non-daisy chain scenario: One RCU is installed in a sector, and RCUs of three sectors are not connected with each other. Do not remove the protective cap from the female connector of the RCU. The three sectors have the same installation procedure.

Daisy chain scenario: One RCU is installed in a sector, and RCUs of three sectors are in daisy chain. Do not remove the protective cap from the female connector on the RCU of the last sector. For details about how to connect the RCUs in daisy chain mode, see the RCU Installation Guide.

Sector 1

Sector 2

Sector 1/ Sector 2/ Sector 3

Sector 3

er st e lu id r C Gu to n ec tio i-s la Tr tal 8 s In 33

Tri-sector Cluster Antenna Installation Guide


Part Number: 31043751 Issue: 01

Connect the AISG Cable


CAUTION 1. The SBT must be produced by Huawei. The SBT must be installed within the antenna radome, vertical to the internal pole inside the antenna. For details, see step 2. 2. Before installing the RCU and SBT, ensure that sufcient installation space has been reserved for them.

1 Remove all protective caps from all DIN connectors and Tilt ports. 2 Install the SBT. For details, see the SBT Installation Guide. 3 Install RF jumpers. 4 Install the RCU. For details, see the RCU Installation Guide. 5 Connect the AISG cables.

Align the convex of the AISG male connector with the concave of the AISG female connector correctly, press the connectors together, and then secure them by hand properly. For details, see the following gure. RCU SBT

AISG cable

st lu or C ct se Tr ial la In st tio n

33 9

Gu

id

er

Tri-sector Cluster Antenna Installation Guide


Part Number: 31043751 Issue: 01

Non-Daisy Chain Scenario

Non-daisy chain scenario: One SBT is installed in a sector, where the RCU connects to the SBT by using an AISG cable. Do not remove the protective cap from the female connector of the RCU. Three sectors have the same installation procedure. Sector 1/ Sector 2/ Sector 3

RCU

SBT

Daisy Chain Scenario

Daisy chain scenario: Only one SBT is installed. RCUs of 3 sectors are connected in daisy chain mode by using AISG cables. For details about how to connect the RCUs in daisy chain mode, see the RCU Installation Guide.

Sector 1

Sector 2

Sector 3

RCU

SBT RCU RCU

er st e lu id r C Gu to n ec tio i-s la Tr tal 0 s In 34

Tri-sector Cluster Antenna Installation Guide


Part Number: 31043751 Issue: 01

CAUTION Move the antenna to the mounting platform by using a hoisting ring.

Securing the Antenna 1 2

Remove the hoisting ring.

Install the lightning rod.

3
The concave on the top of the sector silkscreen is the center of the sector. Align the concave with the direction of the determined antenna azimuth.

Adjust the azimuth, install the antenna to the mounting frame, and x nuts of three sectors.

Place the protective cover to the bottom of the antenna and lock screws on the three sectors.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.


THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com

Any previous catalogue issues become invalid. Issue: 2012-10-26

st lu or C ct se Tr ial la In st tio n

34 1

Gu

id

er

www.huawei.com

Hungary Holland Hub Dubai Hub Mexico West Africa Brazil India China

Current Supply Route Future Supply Route

5 supply centers 2Hubs, 81 service branches

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer
THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC. THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE PURPOSE ONLY AND CONSTITUTES NEITHER AN OFFER NOR AN ACCEPTANCE. HUAWEI MAY CHANGE THE INFORMATION AT ANY TIME WITHOUT NOTICE.

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com Version No.: M3-022337-20130114-C-2.0 www.huawei.com

S-ar putea să vă placă și