Documente Academic
Documente Profesional
Documente Cultură
Anul introducerii
2009 2008 2008 2007
Punctaj
25 15 15 15
70
2. Cursuri universitare i manuale didactice proprii (Licen, Masterat, Doctorat), cu nalt grad de actualizare i originalitate
Nr. crt. 1. 2. Autori (% contribuie) Axinte C., Cristea I, Cristea I. Axinte C. 50 % 50% 50% 50% Denumire curs Elemente de design industrial. Note de curs si aplicatii Tolerante si control dimensional. Indrumar de laborator Editura, Localitatea /ISBN Alma-Mater Bacau, ISBN 978-973-183339-2 Alma Mater, Bacau ISBN 978-973-183341-5 Referent tiinific Anul apariiei 2007 Limba de publicare* Ro Pagini Efective 138 Conv. 138 Punctaj 0.69
2007
Ro
77
77
0.385
F 90.07/Ed.2
3. 4. 5.
Axinte C. Design de produs. Note 2010 Cristea I. de curs si aplicatii 6. Axinte C. Eco-design. Note de Alma Mater, Bacau 2010 Cristea I. curs si aplicatii 7. Axinte C. Dimensiuni, proportii, Alma Mater, Bacau Cristea I. armonii si culori 2010 Gherghel M. TOTAL CRITERIU C1.2. * - RO romn; EN englez; FR francez; DE german; ES spaniol; AL alt limb (specificai)
Alma Mater, Bacau ISBN 978-973-183340-8 Alma Mater, Bacau ISBN 978-973-183342-2 Alma Mater, Bacau
2007 2007
Ro Ro Ro Ro Ro
77,285
1.
TOTAL CRITERIU C2.1. * - pentru vizualizarea editurilor romneti acreditate CNCSIS vezi www.cncsis.ro/ ** - RO romn; EN englez; FR francez; DE german; ES spaniol; AL alt limb (specificai)
F 90.07/Ed.2
Koliopoulou G., Axinte C. KoliopouloS T. C., Tzanis D., Koliopoulou G., Axinte C. Axinte C. Cristea I. Radu P. Radu (Axinte) Crina Radu Crina
3 4 5
software base for efficient lining methods of technical projects Moustos Lake Development of a useful image processing environmental software base for efficient lining methods of technical projects risk assessment of ponds liner manufactures State of stresses predicted by a numerical model based on different plasticity criteria, New configurations of the SPIF process - a review Determination of the maximum forming angle of some carbon steel metal sheets Effects of process parameters on the quality of parts processed by single point incremental forming
MOCM-15, vol. 1 Bacau/ 1224-7480 International Journal of Modern Manufacturing Technologies, 20673604 Journal of engineering studies and research, 2068-7559 Journal of Engineering Studies and Research/2068-7559 International Journal of Modern Manufacturing Technologies/20673604
B+
2009/15/3340
EN
B+ B+ B+
EN EN EN
6 6 4
6 6 4
1.33 4 4
Radu Crina
B+
EN
4 15,33
TOTAL CRITERIU C2.2. * A (sau ISI), A0 (reviste strine necotate ISI), B+, B, C, D, E (neacreditate) pentru clasificarea revistelor romneti, vezi www.cncsis.ro/ ** - RO romn; EN englez; FR francez; DE german; ES spaniol; AL alt limb (specificai)
12th International
Research/Expert Conference Trends in the Development of Machinery and Associated Technology TMT 2630 august 2008, Istanbul, Turcia
F 90.07/Ed.2
Iordache M. Axinte C.
50% 50%
Theoretical studies concerning the blank holder force of a blank shape in the cup drawing process
Axinte C. Iordache M.
50% 50%
Distribution of strains and stresses within parts made on anisotropic metal sheets
Axinte C.
Stresses distribution as a function of the used plasticity criteria Formability limits of a SPIFed stainless steel
Radu Crina
Determination of Formability Limit of some Materials Processed by Single Point Incremental Forming Preocupations, achievements and gaps in understanding the
Radu Crina
ISBN 978-9958-617-6 The Seventh International Congress in Materials Science and Engineering, "SIM 2009", 28-31mai 2009, Iasi, Romania The Seventh International Congress in Materials Science and Engineering, "SIM 2009", 28-31mai 2009, Iasi, Romania The 13th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology TMT 2009, Hammamet, Tunisia, The 14th International Conference ModTech 2010, Slanic Moldova Proceeding of the 14th International ESAFORM Conference on Material Forming Esaform 2011 Proceeding of the 3rd International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS11) Proceeding of the 5th International
1.2
EN
1.2
EN
1.3
2009
EN
1.2
2010
EN
1.33
1.4
2011
EN
1.4
2011
EN
1.2
2011
EN
F 90.07/Ed.2
TOTAL CRITERIU C2.3. * - conform CRITERII DE EVALUARE SI INDICATORI DE PERFORMANTA PENTRU AUTOEVALUAREA CADRELOR DIDACTICE, C2.3, a, b, c, d. ** - RO romn; EN englez; FR francez; DE german; ES spaniol; AL alt limb (specificai)
TOTAL CRITERIU C2.4. *- conferin invitat (a) / comunicare oral (b) / poster (c) ** conform CRITERII DE EVALUARE SI INDICATORI DE PERFORMANTA PENTRU AUTOEVALUAREA CADRELOR DIDACTICE , C 2.4, i / ii / iii / iv. *** - RO romn; EN englez; FR francez; DE german; ES spaniol; AL alt limb (specificai)
12
* - a internaional; b - naional ** - conform CRITERII DE EVALUARE SI INDICATORI DE PERFORMANTA PENTRU AUTOEVALUAREA CADRELOR DIDACTICE, C2.9, : i / ii / iii * - conform CRITERII DE EVALUARE SI INDICATORI DE PERFORMANTA PENTRU AUTOEVALUAREA CADRELOR DIDACTICE, C2.10, a / b / c
76,66
F 90.07/Ed.2
2. 3.
F 90.07/Ed.2
3.
4.
5. 6. 7. 8.
Responsabiliti n comunitatea academic: - membru n senatul universitar - membru n consiliul profesoral - membru n biroul catedrei - ndrumtor de an Exercitarea unor functii de conducere: - rector; - prorector; - cancelar; - decan; - prodecan; - secretar stiintific; - sef catedra/director departament; - adjunct sef catedra/ resp. calitate; - director program master Participarea la dezvoltarea programelor de burse pentru mobilitati studenti prin programe europene Coordonarea unor programe internationale ( PHARE, SOCRATES, LEONARDO, s.a. ) Coordonarea unor programe de dezvoltare a infrastructurii si serviciilor universitatii Stabilirea de acorduri bilaterale de cooperare cu universitati din tara si din strainatate
Bifai responsabilitile pe care le avei n comunitatea academic: x x Bifai funciile pe care le avei n comunitatea academic: 3 2
Enumerati acordurile incheiate cu universitati din strainatate Sunteti coordonator la nivel institutional sau la nivel de facultate Definiti titlul programului coordonat
45
F 90.07/Ed.2
RECAPITULAIE FINAL
Criteriul 1 77,285 20 15,46 Criteriul 2 76,66 20 15,33 Criteriul 3 0 20 0 Criteriul 4 20 Criteriul 5 45 20 9 Total 100
Declar pe proprie rspundere c datele completate n aceast FI DE AUTOEVALUARE sunt conforme cu realitatea. DATA:
23.01.2012
NTOCMIT,
.l.dr.ing. Crina RADU
VERIFICAT EF DEPARTAMENT,
Prof.dr.ing. Gheorghe BRABIE
F 90.07/Ed.2