Documente Academic
Documente Profesional
Documente Cultură
Avensis
FR-FOR-POUR **T25*R
RHD
Avensis (T25)
1. TABLE OF CONTENTS
1. Application Chart ............................................................................................................................................................................ 2. System Layout .............................................................................................................................................................................. 3. In-dash 6 CD-Changer Installation ................................................................................................................................................. 4. Hide-away 6 CD-changer installation ..............................................................................................................................................
4 5 6 15
Avensis (RHD) - 3
10-02
p. 1/1
Avensis **T25*R
+ ADD-ON UNIT(S)
Hide Away CD-Changer TM0461 (08601-00911) In-Dash CD-Changer TM0561 (08601-00907) Navigation System TNS200 (08545-00802) (ONLY PORT FIT)
(RHD)
COMBINATION
MOP-unit or W53900 (08600-05821) (2) (2) (1) (1) (3) (3) (2) (2) (1) (1) (2) (2) (1) (1) (3) (3) (2) (2) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) Wire (08695-00370) Wire (08695-00370) MOP-unit or W53901 (08600-05822) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-Unit or W53900 (08600-05821) MOP-unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822) MOP-unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822)
HEAD UNIT
Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) Wire (08695-00370) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60)
10
11
12
MOP: Factory installed option (1): Glove box application (2): Located under the RH-seat (3): Located under the LH-seat. For required additional parts see the NAVI installation instructions.
Avensis (T25)
2. SYSTEM LAYOUT
THE HIDE-AWAY 6 CD-CHANGER
12
12
Avensis (RHD) - 5
10-02
Avensis (T25)
2
4 1 2
2.
3
Fig. 2 Attach the protection tape 4 .
3.
4 4
Avensis (T25)
4.
101 101
Fig. 4
5. a) b)
104
104
28
Remove the glove compartment 6 . Remove the hooks 104 . 104 : Hook (2x) Remove the stoppers 28 by pulling them inside.
28
6
Fig. 5
6. a) b) c)
27 20
Remove the switch 26 . Remove the bulb 20 . Remove the connector 27 by moving it upward.
26
Fig. 6 Avensis (RHD) - 7 10-02
Avensis (T25)
7.
Appro ximat ely 1
Fig. 7 8. Relocate the vehicle connector 28 position from location A to locationB and attach the connector 28 to the harness using tape 5 and a wire tie 20 . 20 : Wire tie (1x)
28
28
5
Harness
20
28
Avensis (T25)
9.
Wire of changer unit
Route and attach the changer wire using wire ties 20 . 20 : Wire tie (3x)
20
Connect
Fig. 9
20
10. Route the changer wire 6 using wire ties 20 and wrap the connectors using tape 5 . 5 : Tape 2x (3x) 20 : Wire tie (2x)
5
AVC-LAN wire harness
5
Vehicle harness
To audio
Avensis (T25)
11. Cut the template (312N) 7 (see page 22, 23) using scissors.
Fig. 11
7
Corner fits
Marking
Fig. 12
13. Use protection tape 4 in order not to damage the surface of the dashboard.
Marking
Avensis (T25)
Cut Cut
Saw
Fig. 14
Saw
Fig. 15
16. Temporary attach the screws in the existing holes. 106 : Screw (M6x12) (2x)
106
Fig. 16 Avensis (RHD) - 11 10-02
Avensis (T25)
30
17. Fit the side bracket 21 (L) and (R) onto the changer unit 30 . 10 : Bolt (M5x8) (4x)
10 21 21
Fig. 17
10
22
Connector
18. a) Fit the switch 24 . b) Fit the in-dash changer unit 22 : Screw (M6x12) (2x) 23 : Screw (M6x14) (2x)
30 .
23
Fig. 18
30
23
24
Existing marking
Cut
6
Blanket
Avensis (T25)
104
Cut
Avensis (T25)
Fig. 23
10-02
Avensis (RHD) - 14
Avensis (T25)
2
4 1 2
Fig. 24
2.
3
Fig. 25 3. Attach the protection tape 4 .
Fig. 26
Avensis (RHD) - 15
10-02
Avensis (T25)
4.
101 101
Fig. 28
105 15
5. a) b)
Remove the cover 15 . 105 : Screw (2x) Remove the centre console 16 . 106 : Screw (4x) 107 : Bolt (4x)
16 106 107
106
107 107
Fig. 29 10-02 Avensis (RHD) - 16
Avensis (T25)
6.
a) b)
Remove the front door scuff plate 8 (R). : Nail (5x) Remove the kick panel 9 (R). 103 : Nut (1x)
103 9
Fig. 30
7.
11
10
Remove the driver seat 10 . 106 : Bolt w/washer (4x) 11 : Cover (2x)
11
106 106
Fig. 31
25mm
8.
Avensis (T25)
9.
Route the changer wire 6 and wrap the connectors using tape 5 . 5 : Tape (2x3)
Vehicle Harness
Do not connect
6 5
To audio
5
AVC-LAN wire harness WITHOUT POP UP DISPLAY
5
Do not connect
6
Do not connect
Fig. 33
10. Route and attach the changer wire using tape 5 (1x).
Duct
6
Fig. 34 10-02 Avensis (RHD) - 18
Avensis (T25)
11. a) Route the changer wire 6 along the cross member 12 and attach using tape 5 (4x). b) Attach the excess wire of the changer wire 6 onto the cross member 12 using tape 5 (6x).
12
6 5
Vehicle harness
Excess wire
50 0m m
m 0m 27
30 0m m
50 0m m
5
Fig. 35
m 0m 20
Cross member
12. Cut the carpet at the changer unit attachment position on the driver side.
Duct
269mm
45mm
80mm
185mm
Avensis (T25)
8 7
13. Attach the adhesive tapes 5 and the spacers ( 15 and 16 ) to the base bracket 7 using screws 8 . 15 : Spacer (w/o nut) 16 : Spacer (w/nut) 5 : Tape (1x) 5 *: Tape (cut to size 67mmx50mm) (1x) 8 : Screw (M5x16) (2x)
15 16 5 15 16 7
5 5
Fig. 37 14. Attach the base bracket on the driver side.
7
on the floor
Fig. 38
10-02
Avensis (RHD) - 20
Avensis (T25)
15. Mount the side brackets changer unit 12 . 10 : Bolt (M5x8) (4x) CAUTION
Screw
(2x) to the
CAUTION Loosen the screws 10 before moving them. Tighten up after the position is changed.
9 9 10
10 9 12
Hole position on the left side Hole position on the right side
Fig. 39
6 10
10 12
12
Connect the changer wire 6 to the changer unit 12 . Mount the changer unit 12 onto the base bracket 7 using screws 10 . 105 : Bolt (M5x10) (4x)
Fig. 40
ENSURE THAT ALL REMOVED CONNECTORS ARE PUT BACK CORRECTLY. REFIT THE TRIM AND REMOVED PARTS.
Avensis (RHD) - 21
10-02
Avensis (T25)
UP
10-02
Avensis (RHD) - 22
312N TEMPLATE
Cut line Cut line precisely
precisely
Cut line
10-02
Avensis (RHD) - 23