Documente Academic
Documente Profesional
Documente Cultură
146
Anchor systems
Chemical anchors
HVU adhesive anchor HAS-E anchor rod / HIS-N internally threaded sleeve HIT-HY 150 MAX injection technique HIT-RE 500 injection technique HIT-HY 70 injection technique HIT-MM PLUS injection technique HFX anchoring adhesive Components & accessories
Page
Accessories
Threaded rods, couplers, nuts 179
Software
PROFIS Anchor PROFIS Rebar EXBAR Rebar 182 182 182
147
Anchor systems
Safety
Approved Products As an international company, Hilti has gained many approvals for its products with high performance loads, fire rating and corrosion resistance. Low odour chemical anchors, foil capsules, simple setting procedures Hilti anchors are designed with the user in mind and offer outstanding performance with comfort and practicality.
Productivity
System Solutions Complete and integrated systems from drilling to fixing with setting equipment and accessories, ideal for serial fastenings saving time and money.
Innovation
Faster, easier, more economical Our technical teams constantly strive to improve on our anchor design. Foil packs not glass, a jumbo cartridge dispenser with dosage meter and friction - grip setting tools all seek to drive speed and efficiency.
Support
Field Engineers located around Australia for personalised fastening design and technical support onsite with the backup of international experience and approvals. One supplier who designs, manufactures and delivers the product with on-site consultancy, technical backup and service.
148
Anchor systems
Fire resistance
When subject to high temperatures, as in fire, the properties of both the anchor and the surrounding base material are degraded. In order to provide customers with appropriate information for fixings which are to be used in situations where they cannot be protected from the possibility of fire, Hilti carries out independent fire tests to international standards on a range of anchors.
Base Material
The wide variety of building materials used today provide different anchoring conditions for anchors. There is hardly a base material in or to which a fastening cannot be made with a Hilti product. However, the properties of the base material play a decisive role when selecting a suitable fastener/anchor and determining the load it can hold. Hilti can supply anchors suitable for fixing to concrete, hollow and solid masonry, aerated concrete, lightweight concrete, and drywall or plasterboard. In addition a large variety of other base materials (eg. stone) can be encountered in practice. Generally fastenings can be made to these materials, but these cases should be referred to a Hilti Field Engineer.
These assessments and performance ratings are available on request through your local Hilti Field Engineer.
GALV
Galvanised Finish
A4 316
Corrosion Resistance
HCR
high Mo
Corrosion Resistance
Technical Support
Our entire sales team is highly trained to provide technical advice on the Hilti range of anchors. In addition we have a dedicated team of Field Engineers, operating nationwide who can provide on-site technical support, fastening design advice and service, technical seminars and training support on PROFIS anchor and rebar design softwares. Our team is dedicated to working directly with our customers to ensure the simplest, safest and most economical fastening solutions.
The usual basic coating for most Hilti anchors is electro-galvanised (zinc plated) to 5 mm. This coating gives some degree of protection but is most suitable in dry, indoor conditions. Improved resistance can be provided by Hot-dip galvanising or equivalent mechanical processes. The Galvanised Finish Symbol indicates that such a superior coating is available. All stainless steel anchors stocked by Hilti (Aust) are of superior quality A4 (SS 316) stainless steel. It offers significantly better corrosion protection than A2 stainless steels offered by some manufacturers. Materials in the A4 group (stainless steel) or those of a higher quality should be used for fastenings exposed to a greater risk of corrosion, such as those in town air, industrial atmosphere, coastal climate and in road construction. The material, HCR, is a chromium-nickel steel alloy with a high molybdenum content. The HAS-HCR rods have similar mechanical properties and performance to the A4 HAS-R versions. Details are given in the product information pages. Hilti products accompanied with this symbol are available in HCR.
149
Anchor systems
Features I Fire rated I Virtually odourless resin with a high flash point I Good wetting of concrete by the adhesive: high bond strength I Capsule contains graded quartz crystals that roughen core drilled holes I Can be used in dry or damp base material I No expansion force in base material I Good resistance to chemicals I Capsules wont drop out of overhead holes I Wide installation temperature range -5C to +40C I Components in capsule are in correct measured amounts that ensures reliable mixing and no air pockets in hole I Quick curing I Tough, flexible capsule Technical data
For external thread HAS-E
Hole depth, h1 (mm) Designation threaded rod Hole diameter, d1 (mm) Nrec kN fc,cyl=20MPa Vrec kN fc,cyl=20MPa Designation internally threaded
HAS M8 HAS M10 HAS M12 HAS M16 HAS M20 HAS M24 HAS M30
10 12 14 18 24 28 35
14 18 22 28 32
HVU M8 x 80 HVU M10 x 90 HVU M12 x 110 HVU M16 x 125 HVU M20 x 170 HVU M24 x 210 HVU M30 x 270
For stainless steel, please contact your local Hilti Engineer or call 131 292
Curing time Base material temperature Time between setting and loading
+20C 20 min.
+10C 30 min.
0C 1 hour
5C 5 hours
HVU M 8 x 80 HVU M 10 x 90 HVU M 12 x 110 HVU M 16 x 125 HVU M 20 x 170 HVU M 24 x 210 HVU M 30 x 270 HVU M 36 x 330
10 12 14 18 24 28 35 40
14 18 22 28 32
10 10 10 10 5 5 4 2
HVU M12 bulk pack HVU M16 bulk pack HVU M20 bulk pack
For assistance in anchor design contact your local Hilti Engineer or call 131 292 150 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Steel (Grade 5.8 - 500 MPa) zinc plated to min. 5 microns 332219 HAS-E M8 x 80/14 106mm 332220 HAS-E M10 x 90/21 125mm 332221 HAS-E M12 x 110/28 153mm 332222 HAS-E M16 x 125/38 182mm 332223 HAS-E M20 x 170/48 240mm 332224 HAS-E M24 x 210/54 290mm Steel (Grade 5.8, - 500 MPa) hot dipped galvanised to min. 40 microns 333143 HAS-E-F M8 x 80/14 106mm 333145 HAS-E-F M10 x 90/21 125mm 333148 HAS-E-F M12 x 110/28 153mm 333153 HAS-E-F M16 x 125/38 182mm 333158 HAS-E-F M20 x 170/48 240mm 333163 HAS-E-F M24 x 210/54 290mm L 333165 HAS-E-F M30 x 270/70 (grade 8.8) 380mm L 333167 HAS-E-F M36 x 330/90 (grade 8.8) 460mm Stainless steel (316 grade, 700 MPa) 333119 HAS-E-R M8 x 80/14 333122 HAS-E-R M10 x 90/21 333126 HAS-E-R M12 x 110/28 333131 HAS-E-R M16 x 125/38 333135 HAS-E-R M20 x 170/48 333137 HAS-E-R M24 x 210/54
L Other sizes available on request and subject to lead time
10mm 12mm 14mm 18mm 24mm 28mm 10mm 12mm 14mm 18mm 24mm 28mm 35mm 40mm 10mm 12mm 14mm 18mm 24mm 28mm
80mm 90mm 110mm 125mm 170mm 210mm 80mm 90mm 110mm 125mm 170mm 210mm 270mm 330mm 80mm 90mm 110mm 125mm 170mm 210mm
14mm 21mm 28mm 38mm 48mm 54mm 14mm 21mm 28mm 38mm 48mm 54mm 70mm 90mm 14mm 21mm 28mm 38mm 48mm 54mm
15 30 50 100 160 240 15 30 50 100 160 240 300 1500 15 30 50 100 160 240
20 20 20 20 10 10 20 20 20 20 10 10 4 2 20 20 20 20 10 10
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Steel (Grade 460 - 510MPa) zinc plated to min. 5 microns 258015 HIS-N M8 x 90 (for HVU M10) 258016 HIS-N M10 x 110 (For HVU M12) 258017 HIS-N M12 x 125 (For HVU M16) 258018 HIS-N M16 x 170 (For HVU M20) 258019 HIS-N M20 x 205 (For HVU M24) Stainless steel (grade 316 - 700MPa) 258024 HIS-RN M8 x 90 (HVU M10) 258025 HIS-RN M10 x 110 (HVU M12) 258026 HIS-RN M12 x 125 (HVU M16) 258027 HIS-RN M16 x 170 (HVU M20) 258028 HIS-RN M20 x 205 (HVU M24)
L Available on request and subject to lead time
14mm 18mm 22mm 28mm 32mm 14mm 18mm 22mm 28mm 32mm
95mm 115mm 130mm 175mm 210mm 95mm 115mm 130mm 175mm 210mm
20mm 25mm 30mm 40mm 50mm 20mm 25mm 30mm 40mm 50mm
15 28 50 85 170 12 23 40 70 130
10 10 5 5 5 10 10 5 5 5
100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 151
Anchor systems
TE setting tool for HAS-E, HAS-E-F, HAS-E-R anchor rods for external end drive
Item No. Ordering Designation Connection Thread on Anchor Rod For Use with Recommended Rotary Hammer
369223 369224 369225 369226 376459 376460 376461 369227 369228 369229
* with TE-C chuck
TE-C-E M 8 TE-C-E M 10 TE-C-E M 12 TE-C-E M 16 TE-T-E M 12 TE-T-E M 16 TE-T-E M 20 TE-Y-E M 16 TE-Y-E M 20 TE-Y-E M 24
M8 M 10 M 12 M 16 M 12 M 16 M 20 M 16 M 20 M 24
HAS-E, HAS-E-F, HAS-E-R M8 HAS-E, HAS-E-F, HAS-E-R M10 HAS-E, HAS-E-F, HAS-E-R M12 HAS-E, HAS-E-F, HAS-E-R M16 HAS-E, HAS-E-F, HAS-E-R M12 HAS-E, HAS-E-F, HAS-E-R M16 HAS-E, HAS-E-F, HAS-E-R M20 HAS-E, HAS-E-F, HAS-E-R M16 HAS-E, HAS-E-F, HAS-E-R M20 HAS-E, HAS-E-F, HAS-E-R M24
TE 7-C, TE 30-C, TE 30-M* TE 7-C, TE 30-C, TE 30-M* TE 7-C, TE 30-C, TE 30-M* TE 30-C, TE 30-M* TE 40-AVR TE 40-AVR TE 40-AVR TE 60, TE 60-ATC, TE 70-ATC TE 60, TE 60-ATC, TE 70-ATC TE 60, TE 60-ATC, TE 70-ATC
/4 drive
HIS-S-M 8 setting tool HIS-S M 10 setting tool HIS-S M 12 setting tool HIS-S M 16 setting tool HIS-S M 20 setting tool
M8 M 10 M 12 M 16 M 20
1/2 for M8 rod 1/2 for M10 rod 1/2 for M12 rod 1/2 for M16 rod 3/4 for M20 rod
1/2" DRIVE SOCKET (can also be used for double nut setting of threaded rods) 060186 For M8 rod 060187 For M10 rod 060188 For M12 rod 060189 For M16 rod 3/4" DRIVE SOCKET (can also be used for double nut setting of threaded rods) 001958 For M12 rod 060190 For M16 rod 060191 For M20 rod 060192 For M24 rod 3092011 For M30 rod 3092009 For M36 rod
Connection shafts
Connection shafts can be used with appropriate drive socket for setting HAS-E, HAS-E-F, HAS-E-R anchor rods, or with HIS-S setting tools and drive socket for setting HIS-N, HIS-RN.
Item No. Ordering Designation For Connection thread For Use in Rotary Hammer
TE-C connection shaft 1/2 TE-T connection shaft 3/4 TE-Y connection shaft 3/4
M 8, M 10, M 12, M 16 M 12, M 16, M 20, M 24, M 30, M 36 M 12, M 16, M 20, M 24, M 30, M 36
For assistance in anchor design contact your local Hilti Engineer or call 131 292 152 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Technical data
For external thread HAS-E
Hole depth, h1 (mm) Designation threaded rod Hole diameter, d1 (mm) Nrec kN fc,cyl=20MPa Vrec kN fc,cyl=20MPa Hole depth, h1 (mm)
HAS M8 HAS M10 HAS M12 HAS M16 HAS M20 HAS M24
10 12 14 18 24 28
14 18 22 28 32
For stainless steel, please contact your local Hilti Engineer or call 131 292
Curing time Base material temperature Time between setting and loading
+20C 30 min.
+5C 1 hour
0C 2 hours
5C 4 hours
330ml/500ml
Package contents Price per
Item no.
Ordering designation
Volume
298119 298220
HIT-HY 150 MAX (includes 2 mixers) HIT-HY 150 MAX (includes 2 mixers)
330ml 500ml
20 20
1 1
See page 151 for Hilti HAS and HIS rods to be used with HIT-HY 150 MAX
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 153
Anchor systems
Features I Very high loading values with reinforcing bars in the range N10-N40 I High performance fastening with threaded anchor rod I Optimum working time in extended temperature range from -5 to +40C I Low sensitivity to oversized holes, dusty & wet holes I Also suitable for holes drilled with diamond coring equipment I Red coloured adhesive for easy checking of proper setting on site I Comprehensive technical software for effective fastening design I Pneumatic bulk dispenser available I Low wastage foil pack
Base material temperature Gel time Curing time before rebar can be fully loaded
Technical data
For external thread HAS-E
Hole depth, h1 (mm) Designation threaded rod Hole diameter, d1 (mm) Nrec kN fc,cyl=20MPa Vrec kN fc,cyl=20MPa Designation internally threaded
HAS M8 HAS M10 HAS M12 HAS M16 HAS M20 HAS M24 HAS M30 HAS M36
10 12 14 18 24 28 35 40
14 18 22 28 32
For stainless steel, please contact your local Hilti Engineer or call 131 292
CHEMICAL INJECTION FOR SETTING REINFORCING BARS INTO CONCRETE 337109 HIT-RE 500 (includes 1 static mixer, 1 mixer extension) 369109 HIT-RE 500 (includes 1 static mixer, 1 mixer extension) 373958 HIT-RE 500 JUMBO (includes 1 static mixer, 1 mixer extension) 387094 HIT-RE 500 SD JUMBO (includes 1 static mixer, 1 mixer extension) *
25 20 4 4
1 1 1 1
See page 151 for Hilti HAS and HIS rods to be used with HIT-RE 500
For assistance in anchor design contact your local Hilti Engineer or call 131 292 154 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Recommended load values for Australian brick. For further information refer to the Fastening Technology Manual or contact your local Field Engineer on 131 292.
Base material temperature -5C 0C 5C 20C 30C 40C
Item no. Ordering designation
Features I Variable embedment depths. Hiltis unique, combinable, corrosion free, composite mesh sleeve makes it possible I Optimised application, comfortable and flexible I For indoor and outdoor applications, as well as for use in dry and wet drilled holes I Can be used at any time of the year in a temperature range between -5 and +40C I Fastenings are free of expansion forces I High degree of fire resistance I Mortar injection control: the user identifies when the correct mortar amount has been injected. Less mortar loss and lower costs per fastening with full performance
Contents (mm)
Package contents
383677
330
HIT-SC 12x50 HIT-SC 12x85 HIT-SC 16x50 HIT-SC 16x85 HIT-SC 22x50 HIT-SC 22x85
20 20 20 20 20 20
10 10 10
HIT-AC M6 x 80/14 rod HIT-AC M8 x 80/16 rod HIT-AC M10 x 80/20 rod HIT-AC M12 x 80/23 rod
20 20 10 10
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 155
Anchor systems
Features I Quick curing I Versatile chemical anchor for non-specified fastening points suited for the every-day user I Foil pack can be completely emptied, less wastage I Use one dispenser line for all Hilti chemical anchor products I Odourless
Technical data
For external thread HAS-E
Hole depth, h1 (mm) Designation threaded rod Hole diameter, d1 (mm) Nrec kN fc,cyl=20MPa Vrec kN fc,cyl=20MPa Hole depth, h1 (mm)
80 90 110 125
10 12 14 18
85 95 115 130
14 18 22
For stainless steel, please contact your local Hilti Engineer or call 131 292
Curing time Base material temperature Time between setting and loading
>30C 30 min.
20C 45 min.
0C 4 hours
330ml/500ml
Volume Package contents Price per
Item no.
Ordering designation
408952 408954
330ml 500ml
20 20
1 1
See page 151 for Hilti HAS and HIS rods to be used with HIT-MM PLUS
Features I Quick curing I Fits with any standard caulking gun I Odourless
Technical data
For external thread HAS-E
Hole depth, h1 (mm) Designation threaded rod Hole diameter, d1 (mm) Nrec kN fc,cyl=20MPa Vrec kN fc,cyl=20MPa Hole depth, h1 (mm)
80 90 110 125
10 12 14 18
85 95 115 130
14 18 22
For stainless steel, please contact your local Hilti Engineer or call 131 292
Curing time Base material temperature Time between setting and loading
>30C 25 min.
20C 40 min.
10C 1 hour
0C 2.5 hours
Item no.
Ordering designation
Volume
Package contents
Price per
284265
275ml
12
See page 151 for Hilti HAS and HIS rods to be used with HFX
For assistance in anchor design contact your local Hilti Engineer or call 131 292 156 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Features I Comprehensive sets of accessories for maximising your HIT performances and productivity gain I Great opportunity to customise your HIT installation equipment according to your application needs
384753
HIT Premium rebar accessory set The Hilti HIT premium set for the rebar professionals who perform post-installation of rebars in the most challenging situations, with all the required accessories to post-install rebars up to 25 and 2500 mm in embedement depth. Content: case, installation instructions, installation report, drilling aid, compressedair connector, blowing extension hoses and tubes, air nozzles DL 12-32 (for rebar 8-25), holders TE-Y and TE-C, brush extensions RBS, round steel brushes RB 1232 (for rebar 8-25), injection extension hoses and tubes, piston plugs SZ 12-32 (for rebar 8-25), markers, thermometer, rebar saw
Item no.
Ordering designation
274888
HIT Profi rebar accessory set The Hilti HIT set for those professionals who often encounter rebar installation in their daily business, with all the required equipment to post-install rebars up to 20 mm and 800 mm in embedement depth. Compact, versatile and complete to make best use of the Hilti HIT rebar system and gain productivity in the most common applications. Content: case, installation instructions, installation report, blow-out gun, blowing extension hoses, air nozzles DL 12-25 (for rebar 820), holders TE-Y and TE-C, brush extensions RBS, manual brush extension and handle, round steel brushes RB 12-25 (for rebar 8-20), manual dispenser MD 2500, injection extension hoses, piston plugs SZ 12-25 (for rebar 8-20)
1 1
1 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 157
Anchor systems
060579
381215
038251
038252 336643
038250 336644 371714 336646 038249 371715 371716 371717 371718 371719 371720 371721
Blow-out pump G 1/4" Blow-out gun HIT-DL 10/0.8 Extension hose for blow-out gun HIT-DL 16/0.8 Extension hose for blow-out gun HIT-DL A Connecting piece for air compressor HIT-DL K Coupler for blowing extensions HIT-DL V10/1 Extension hose for HIT-DL A HIT-DL B Extension tube HIT-VL 16/0.7 Extension tube HIT-VL 16 Extension hose HIT-DL 8/12 Air nozzle HIT-DL 10/14 Air nozzle HIT-DL 12/16 Air nozzle HIT-DL 14/18 Air nozzle HIT-DL 16/20 Air nozzle HIT-DL 20/24 Air nozzle HIT-DL 25/32 Air nozzle
10 16 16 10 16 16 16 12 14 16 18 20 24 32
1 1 1 1 1 10 1 1 10 10 m 1 1 1 1 1 1 1
10 10 10 10 10 100 10 10 80 50 m 10 10 10 10 10 10 10
263438
336645
371722 380917 336548 336549 336550 336551 336552 370774 380918 336553 380919 380920 336554 380921 382259 382260 382261 382262
HIT-RBV Manual brush extension for round steel brush HIT-RBH Manual brush handle for round steel brush TE-Y Holder for brush extension RBS TE-C Holder for brush extension RBS TE-T Holder for brush extension RBS HIT-RBS 10/0.7 Brush extension for round steel brush HIT-RBS-10/0.35 Brush extension for round steel brush HIT-RB 10 Round steel brush 10 HIT-RB 8/12 Round steel brush 12 HIT-RB 10/14 Round steel brush 14 HIT-RB 12/16 Round steel brush 16 HIT-RB 14/18 Round steel brush 18 HIT-RB 16/20 Round steel brush 20 HIT-RB 18/22 Round steel brush 22 HIT-RB 24 Round steel brush 24 HIT-RB 20/25 Round steel brush 25 HIT-RB 28 Round steel brush 28 HIT-RB 30 Round steel brush 30 HIT-RB 25/32 Round steel brush 32 HIT-RB 35 Round steel brush 35 HIT-RB 37 Round steel brush 37 HIT-RB 40 Round steel brush 40 HIT-RB 42 Round steel brush 42 HIT-RB 45 Round steel brush 45
1 1 1 1 1 0.7 1 0.35 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0.3 0.3
25 25 10 10 10 10 10 10 10 10 10 8 8 12 10 12 10 10 12 10 10
038249
335021
335022 335023 335024 335025 335026 335027 380925 335028 380926 380927 380928 380929 380930
HIT-VL 9/1.0 Extension hose HIT-VL 16/0.7 Extension tube HIT-VL 16 Extension hose HIT-VL K Coupler for injection extensions HIT-SZ 8/12 Piston Plug HIT-SZ 10/14 Piston Plug HIT-SZ 12/16 Piston Plug HIT-SZ 14/18 Piston Plug HIT-SZ 16/20 Piston Plug HIT-SZ 20/25 Piston Plug HIT-SZ 30 Piston Plug HIT-SZ 25/32 Piston Plug HIT-SZ 35 Piston Plug HIT-SZ 40 Piston Plug HIT-SZ 42 Piston Plug HIT-SZ 45 Piston Plug HIT-SZ 47 Piston Plug
9 16 16 16 12 14 16 18 20 25 30 32 35 40 42 45 47
1 0.7
10 10 10 m 5 10 10 10 10 10 10 10 10 10 10 10 10 10
387551 387552
100 10 10
For assistance in anchor design contact your local Hilti Engineer or call 131 292 158 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
ED 3500-A dispenser
Application Injection of Hilti HIT adhesive mortar for fastening anchor rods and rebars in concrete, masonry and stone Technical data
Dispensing time Dispenser piston force Battery capacity: B144 (2.6 Ah Lithium Ion 14.4 V battery) 45 sec for 330ml 3000 N 80 foil packs
Features I Suitable for 330ml and 500ml tubes I Ideal for use in difficult to reach areas and repetitive applications I Very easy to useallows mortar to be dispensed quickly and easily I Increase job site productivity I Powerful tool with the pressure of a pneumatic system but without the need for a heavy compressor I Easy dispensing capability in cold temperatures and deep holes
ED 3500-A dispenser
Item no. Ordering designation
360863
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 159
Anchor systems
Item no.
Ordering designation
Hole dia.
HOLE CLEANING EQUIPMENT 060579 ABP blow-out pump (large) 059725 BB blow-out bulb (small) 229133 Round brush with grip 229134 Round brush with grip 229135 Round brush with grip 229136 Round brush with threaded connection 229137 Round brush threaded connection 229673 Round brush threaded connection 229674 Round brush threaded connection 229138 Brush extension with handle & threaded connection 238727 Brush adaptor piece (internal section)
13mm dia. 18mm dia. 28mm dia. 18mm dia. 28mm dia. 38mm dia. 50mm dia.
ED 3500-A dispenser
229154 338853 229170 339477 373960 229155 369220 373959 360863 273114 272435
MD 2000 manual dispenser (330ml) MD 2500 manual dispenser (500ml) Spare foil pack holder (330ml) Spare foil pack holder (500ml) Spare foil pack holder (1400 ml) MD 2000 tool kit (includes MD 2000, blow out pump, brushes, 2 foil pack holders) MD 2500 tool kit (includes MD 2500, blow out pump, brushes, 2 foil pack holders) HIT-P 8000 D pneumatic dispenser (1400 ml) ED 3500-A fully automatic Li-Ion battery dispenser (330ml + 500ml) B144 Li-Ion battery C4/36-ACS Li-Ion charger
HIT mixers
Item no. Ordering designation Min. Hole dia.
HIT-RE-M static mixer For use with HIT-RE 500, HIT-HY 150 MAX, HIT-MM, HIT-HY 70 HIT-EXT 9/1000 (length 1000mm) 10mm HIT-EXT 16/700 (length 700mm for use with HIT-RE 500 only) 16mm
For assistance in anchor design contact your local Hilti Engineer or call 131 292 160 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Features I Integrated plastic section: - to avoid turning in the hole - to telescope and pull down tightly (bridging of gaps) I The bolt can be retorqued I Fire rated I Indicator nut version, HSL-3-B, with red cap nut which breaks off when anchor correctly set to reveal green cap nut I Immediate keying and friction hold I High pull out and lateral shear load values I Safe and reliable fastening thanks to torque controlled force expansion I Steel strength 8.8 with rolled thread, zinc plated to 5 microns thick
371775 371778 371779 388059 388060 371781 371782 371784 371785 371787 371788 371790 371791
HSL-3 M8/20 HSL-3 M10/20 HSL-3 M10/40 HSL-3 M12/20 BW * HSL-3 M12/25 BW * HSL-3 M12/25 HSL-3 M12/50 HSL-3 M16/25 HSL-3 M16/50 HSL-3 M20/30 HSL-3 M20/60 HSL-3 M24/30 HSL-3 M24/60
12mm 15mm 15mm 18mm 18mm 18mm 18mm 24mm 24mm 28mm 28mm 32mm 32mm
80mm 90mm 90mm 90mm 105mm 105mm 105mm 125mm 125mm 160mm 160mm 180mm 180mm
20mm 20mm 40mm 20mm 25mm 25mm 50mm 25mm 50mm 30mm 60mm 30mm 60mm
40 20 20 20 10 20 10 10 10 6 6 4 4
100 100 100 100 100 100 100 100 100 100 100 100 100
HSL-3-B M12/25 HSL-3-B M12/50 HSL-3-B M16/25 HSL-3-B M16/50 HSL-3-B M20/30 HSL-3-B M20/60 HSL-3-B M24/30 HSL-3-B M24/60
20 10 10 10 6 6 4 4
Externally threaded versions, HSL-3-G and HSL-G-R stainless steel, and their component sets, on request subject to lead time.
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 161
Anchor systems
Safe rings
Material Three types of Safering are available: Hot-dip galvanised Drop-forged from Grade 8.8. high tensile steel White nylon coated Hot-dip galvanised Safe ring with a nylon coating for an attractive appearance Stainless Steel Drop-forged from premium quality stainless steel and then electro-polished. Required for exterior use Program
Thread Diam.mm Thread Length.mm
Saferings material Stainless steel, white coated, Galvanised, NW 35x16 plastic washer 12 85
Specifications Hilti Saferings and fixing systems are designed to comply with the requirements of BS 5845, AS 1891, AS 2317, AS 4626 & AS 4488.2, the standard specification for permanent anchors used in association with industrial safety belts and harnesses. As a quality check each Safe ring is proof loaded to 10kN after manufacture. After installation each anchorage must be subjected to a mandatory test in which the anchors are proof loaded to a force of 7.5kN as per AS/NZS 1891.4, or 6 kN as per AS/NZS 4488.2
Ringbolts
Item no. Ordering designation Hole dia. Hole Depth Package contents Price per
Safe ring (stainless steel) Safe ring white (nylon coated) Safe ring (galvanised) NW 35 x 16 plastic washer
1 1 1 1
1 1 1 100
HSL-3 system
371781 371808 067946 HSL-3 M12/25 HSL-3-B M12/25 HSL-G-R M12 component set (S/S) 18mm 18mm 18mm 125mm 125mm 125mm 20 20 1 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 162 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Technical data
Recommended load, (kN), non-cracked concrete, fc,cyl = 20 MPa
Anchor size Tensile load, Nrec. Shear load, Vrec.
Features I The load is applied immediately after setting the anchor I Visual check for correct setting I Complete removal possible I Fire rated I Manufactured from high grade 8.8 steel, zinc plated to min. 5 microns I Sherardised and stainless steel versions available in request
HDA-P M10 HDA-P M12 HDA-P M16 HDA-P M 20 HDA-T M10 HDA-T M12 HDA-T M16 HDA-T M 20 21.9 12.6 31.9 17.1 60.0 35.4 91.4 52.6 21.9 30.9 31.9 38.1 60.0 66.6 91.4 98.0
Note: These values are given for single anchors without influence from neighbouring anchors or concrete edges. Consult the Hilti Fastening Technology Manual for more detailed design.
Unity with the base material The undercut is formed during the setting operation as the rotating segments are forced outwards by the tapered section. The resulting keying hold remains secure even in cracked concrete under dynamic loading.
HDA-P 20-M10 x 100/20 HDA-P 22-M12 x 125/30 HDA-P 22-M12 x 125/50 HDA-P 30-M16 x 190/40 HDA-P 30-M16 x 190/60 HDA-P 37-M20 x 250/50 HDA-P 37-M20 x 250/100
12 8 8 4 4 2 2
HDA sherardised and stainless steel versions available on request subject to lead time
L Available on request subject to lead time.
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 163
Anchor systems
TO SUIT TE 40/TE 40-AVR * 332089 TE-C-HDA-B 20 x 100 332091 TE-C-HDA-B 22 x 125 332090 TE-C-HDA-B 20 x 120 332092 TE-C-HDA-B 22 x 155 332093 TE-C-HDA-B 22 x 175 TO SUIT TE 60-ATC 237449 TE-Y-HDA-B 20 x 100 237450 TE-Y-HDA-B 20 x 120 237451 TE-Y-HDA-B 22 x 125 237452 TE-Y-HDA-B 22 x 155 237453 TE-Y-HDA-B 22 x 175 TO SUIT TE 70-ATC 332097 TE-Y-HDA-B 30 x 190 332098 TE-Y-HDA-B 30 x 230 332099 TE-Y-HDA-B 30 x 250 339271 TE-Y-HDA-B 37 x 300 339272 TE-Y-HDA-B 37 x 350 339270 TE-Y-HDA-B 37 x 250
*With TE-C chuck
20-M10 x 100 22-M12 x 125 20-M10 x 100/20 22-M12 x 125/30, 22-M12 x 125/50 30-M16 x 190 37-M20 x 250
20-M10 x 100/20 22-M12 x 125/30 22-M12 x 125/50 20-M10 x 100/20 22-M12 x 125/30 22-M12 x 125/50 30-M16 x 190/40 30-M16 x 190/60 37-M20 x 250/50 37-M20 x 250/100
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Setting tools
To expand the anchor correctly
Item no. Ordering designation For HDA-P For HDA-T Price per
TO SUIT TE 40/TE 40-AVR * 331843 TE-C-HDA-ST 20-M10 331844 TE-C-HDA-ST 22-M12 TO SUIT TE 60-ATC 287133 TE-Y-HDA-ST 20-M10 287134 TE-Y-HDA-ST 22-M12 TO SUIT TE 70-ATC 331846 TE-Y-HDA-ST 30-M16 339269 TE-Y-HDA-ST 37-M20
*With TE-C chuck
20-M10 x 100 22-M12 x 125 20-M10 x 100 22-M12 x 125 30-M16 x 190 37-M20 x 250
20-M10 x 100 22-M12 x 125 20-M10 x 100 22-M12 x 125 30-M16 x 190 37-M20 x 250
1 1 1 1 1 1
Item no.
Ordering designation
M12 dynamic set washer M16 dynamic set washer M20 dynamic set washer
20 20 20
1 1 1
For assistance in anchor design contact your local Hilti Engineer or call 131 292 164 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
If used in cracked concrete, multiply the tensile load by the factor 0.7. HSC-I internally threaded, zinc plated; HSC-IR internally threaded, stainless steel HSC-A Anchor size Tensile load, Nrec. Shear load, Vrec. M8x40 6.1 8.3 M10x40 6.1 12.1 M12x60 11.2 19.3 M8x40 6.1 5.9 HSC-AR M10x40 6.1 9.3 M12x60 11.2 13.5
Features I Shallow embedment depth, avoids hitting rebars I Anchor hole drilled as usual, without undercutting I Automatic undercutting by anchor when anchor sleeve is driven over anchor stud I Fire rated I Maximum safety due to the undercut and keying action I Small spacings between fastening and edges I Fast setting: no specials undercutting tool required I For use anywhere, in the compression or cracked tension zone of concrete
If used in cracked concrete, multiply the tensile load by the factor 0.7. HSC-A externally threaded, zinc plated; HSC-AR externally threaded, stainless steel
HSC-I, HSC-IR
Tighten. Torque (Nm)
HSC-A, HSC-AR
Package contents Price per
EXTERNAL THREAD (ZINC PLATED) 031139 HSC-A M8x40/15 14mm 031140 HSC-A M10x40/20 16mm 015507 HSC-A M12x60/20 18mm INTERNAL THREAD (ZINC PLATED) 031143 HSC-I M8x40 16mm 031144 HSC-I M10x50 18mm 031146 HSC-I M12x60 20mm
10 20 30 10 20 30
25 25 20 25 25 25
TO SUIT TE 30-C, TE 30-M*, TE 40/TE 40-AVR * 031157 TE-C-HSC-B 14x40 028568 TE-C-HSC-B 16x40 ^ 030708 TE-C-HSC-B 18x50 ^ 030709 TE-C-HSC-B 18x60 ^ 030710 TE-C-HSC-B 20x60
^ To Suit TE 40/TE40-AVR Only * With TE-C chuck
1 1 1 1 1
TO SUIT TE 30-C, TE 30-M*, E 40/TE 40-AVR * 031169 TE-C-HSC MW14 011267 TE-C-HSC MW16 ^ 071352 TE-C-HSC MW18 ^ 071353 TE-C-HSC MW20
^ To Suit TE 40/TE40-AVR Only * With TE-C chuck
M8 M10 M12
M8 M10 M12
1 1 1 1
3) Hammer home with correct setting tool and appropriate rotary hammer, to create undercut
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 165
Anchor systems
Features
I I I I I I
Ideal for temporary fixing. Easily removed and immediate loading Various embedment depths. Close edge distance/spacing Ductile shank and hardened tip for better performance and safety Delta tone or hot-dipped galvanised protection Neat finish (no protruding thread) and integrated washer for the perfect setting Simple marking on the head enables visual control of suitability once anchor is set
Concrete screw anchor 8 368728 HUS-H 8x 55 368729 HUS-H 8x 65 401438 HUS-H 8x 80 368731 HUS-H 8x 90 Concrete screw anchor 10 368735 HUS-H 10x 65 368736 HUS-H 10x 75 401439 HUS-H 10x 90 368738 HUS-H 10x 100 Concrete screw anchor 14 368745 HUS-H 14x 80 368746 HUS-H 14x 115 368748 HUS-H 14x 160
8 8 8 8 10 10 10 10 14 14 14
35 35 35 35 45 45 45 45 65 65 65
3.3 3.3/4.8 3.3/4.8 3.3/4.8 4.8 4.8 4.8/6.8 4.8/6.8 8.5 8.5/13.2/20.0 8.5/13.2/20.0
7.6 7.6 7.6 7.6 11.3 11.3 11.3 11.3 17.0 17.0/24.4/24.4 17.0/24.4/24.4
50 50 50 50 50 50 50 50 16 16 16
100 100 100 100 100 100 100 100 100 100 100
70/90/110 45/25/5
Features I Electronic switch with soft-start function I Reverse switch to easily remove the anchors I Robust, reliable and professional I Little pressure required to set
Package contents Price per
334204
S-NSD 131/2 socket wrench insert (13 mm AF, short) S-NSD 131/2 L. magnetic socket wrench insert (13 mm AF, long with magnet) S-NSD 151/2 socket wrench insert (15 mm AF, short) S-NSD 151/2 magnet socket wrench insert (15 mm AF, long with magnet) S-NSD 211/2 socket wrench insert (21 mm AF, short) S-NSD 211/2 M, magnet socket wrench insert (21 mm AF, short with magnet)
40 77 40 77 40 40
Concrete screw anchor 8 Concrete screw anchor 8 Concrete screw anchor 10 Concrete screw anchor 10 Concrete screw anchor 14 Concrete screw anchor 14
1 1 1 1 1 1
1 1 1 1 1 1
For assistance in anchor design contact your local Hilti Engineer or call 131 292 166 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Reduced anchorage depth (corresponds to max. fastening thickness): Anchor size Tensile load, Nrec. Shear load, Vrec. M6 2.0 3.7 M8 4.3 6.9 M10 5.7 11.1 M12 8.5 17.0 M16 12.3 31.4 M20 16.5 48.6
Features I Easy alignment due to ductility of stud, as anchor is cold formed I End face mark for accurate identification when anchor set I Range of anchor lengths for optimised use and efficiency when fastening materials of different thickness I Ideal for through fastenings, hole size is the same as anchor size I Stand off fastenings possible, due to varying thread lengths I Quick installation with a minimum of drilling I Fire rated
Item no.
Ordering designation
Hole dia.
Thread Length
Package contents
Price per
255830 255831 255832 255833 255834 255835 295377 255839 255840 295350 295352 255844 255845 255846 255847 255848 255849 255852 255853 255854 255855 255857 255858
HSA M6 x 50 HSA M6 x 65 HSA M6 x 85 HSA M6 x 100 HSA M8 x 57 HSA M8 x 75 HSA M8 x 92 HSA M10 x 68 HSA M10 x 90 HSA M10 x 108 HSA M10 x 120 HSA M12 x 80 HSA M12 x 100 HSA M12 x 120 HSA M12 x 150 HSA M12 x 180 HSA M12 x 220 HSA M16 x 100 HSA M16 x 120 HSA M16 x 140 HSA M16 x 190 HSA M20 x 125 HSA M20 x 170
6mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm 16mm 20mm 20mm
15mm 30mm 50mm 65mm 20mm 35mm 52mm 25mm 42mm 60mm 72mm 30mm 45mm 65mm 95mm 125mm 165mm 35mm 50mm 70mm 120mm 45mm 85mm
5mm 20mm 40mm 55mm 5mm 23mm 40mm 5mm 25mm 45mm 55mm 5mm 25mm 45mm 75mm 105mm 145mm 5mm 25mm 45mm 95mm 10mm 55mm
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 167
Anchor systems
Item no.
Ordering designation
Hole dia.
Thread Length
Package contents
Price per
337127 295354 337130 337131 337133 337134 337135 337136 274696 337137
HSA-F M10x90 HSA-F M10x120 HSA-F M12x80 HSA-F M12x100 HSA-F M12x150 HSA-F M16x100 HSA-F M16x140 HSA-F M16x190 HSA-F M20x125 HSA-F M20x170
10mm 10mm 12mm 12mm 12mm 16mm 16mm 16mm 20mm 20mm
28mm 72mm 30mm 32mm 95mm 35mm 70mm 120mm 45mm 85mm
25mm 55mm 5mm 25mm 75mm 5mm 45mm 95mm 10mm 55mm
50 50 25 25 25 16 16 16 10 10
100 100 100 100 100 100 100 100 100 100
Item no.
Ordering designation
Hole dia.
Thread Length
Package contents
Price per
332184 332186 332190 332191 332193 332194 332195 337116 337117 337119
HSA-R M6 x 65 HSA-R M8 x 57 HSA-R M10 x 68 HSA-R M10 x 90 HSA-R M12 x 80 HSA-R M12 x 100 HSA-R M12 x 120 HSA-R M16 x 100 HSA-R M16 x 140 HSA-R M20 x 125
6mm 8mm 10mm 10mm 12mm 12mm 12mm 16mm 16mm 20mm
30mm 20mm 25mm 48mm 30mm 50mm 50mm 35mm 70mm 45mm
20mm 5mm 5mm 25mm 5mm 25mm 45mm 5mm 45mm 10mm
200 100 50 50 25 25 25 16 16 10
100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 168 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Flared end
M6 /4"
M8 /16"
2.1 2.1
3.3 3.9
Features I A flared end for accurate setting flush with the surface, independent of the hole depth; ideal for repetitive fastening with threaded rods of equal length I No damage to the thread when driving in the anchor; easy to expand I Visual verification of full expansion I Anchor and setting tools form a matched system I Manual or mechanically assisted setting tools I Complete expansion after a few hammer blows I Fire rated
Item no.
Ordering designation
Hole dia.
Hole Depth
Thread Depth
Package contents
Price per
STANDARD (Steel zinc plated to min. 5 microns) 242861 HKD-S M6 x 25 242866 HKD-S M8 x 30 243737 HKD-S M10 x 30 248123 HKD-S M10 x 30 Bucket 242869 HKD-S M10 x 40 248124 HKD-S M10 x 40 Bucket 334434 HKD-E M10 x 40 Bucket (For through fixing) 242871 HKD-S M12 x 50 252961 HKD-D M12 x 50 * 242873 HKD-S M16 x 65 242875 HKD-S M20 x 80 242864 HKD-S 1/4" x 25 246713 HKD-S 3/8" x 40 242872 HKD-S 1/2" x 50
* HKD-D for Diamond Drilling Rigs
8mm 10mm 12mm 12mm 12mm 12mm 12mm 15mm 16mm 20mm 25mm 8mm 12mm 16mm
27mm 33mm 33mm 33mm 43mm 43mm 43mm 53mm 53mm 70mm 85mm 27mm 43mm 53mm
11mm 13mm 12mm 12mm 15mm 15mm 15mm 18mm 18mm 23mm 34mm 11mm 15mm 18mm
100 100 100 100 100 100 100 100 100 100 100 100 100 100
STAINLESS STEEL (316 GRADE) 247951 HKD-SR M6 x 25 247952 HKD-SR M8 x 30 247953 HKD-SR M10 x 40 247954 HKD-SR M12 x 50 247955 HKD-SR M16 x 65 247956 HKD-SR M20 x 80
100 100 50 50 25 25
FOR MANUAL EXPANSION 243738 HSD-G M6 1/4" x 25 243740 HSD-G M8 5/16" x 30 243742 HSD-G M10 3/8" x 40 230935 HSD-G M10 3/8" x 30 243743 HSD-G M12 1/2" x 50 243744 HSD-G M16 5/8" x 65 243745 HSD-G M20 3/4" x 80 FOR USE WITH TE 30-C 243751 HSD-M M10 3/8" x 40 243752 HSD-M M12 1/2"
FOR ANCHOR SIZE M6 M8 M10 X 40 M10 X 30 M12 M16 M20 M10 X 40 M12
1 1 1 1 1 1 1 1 1
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 169
Anchor systems
Features I Bridging of gaps I Wide range of applications in concrete, brick etc. I New side wing design for gripping into base material I Complete anchor I Through fastening I Good holding power in low-strength base materials I Fire rated
Recommended loads
Anchor size Tensile Nreca) (kN) Shear Vreca) (kN) 6.5 0.8 1.3 8 1.4 2.8 10 1.8 3.5 12 2.9 5.7 16 4.0 7.9 20 5.3 7.9
STANDARD (zinc plated) 385811 HLC 6.5 x 25/5 6.5mm 30mm 385812 HLC 6.5 x 40/20 6.5mm 30mm 385813 HLC 6.5 x 60/40 6.5mm 30mm 385814 HLC 8 x 40/10 8mm 40mm 385815 HLC 8 x 40/10 bucket 8mm 40mm 385816 HLC 8 x 55/25 8mm 40mm 385817 HLC 8 x 70/40 8mm 40mm 385818 HLC 8 x 85/55 8mm 40mm 385819 HLC 10 x 40/5 10mm 50mm 385820 HLC 10 x 50/15 10mm 50mm 385821 HLC 10 x 50/15 bucket 10mm 50mm 385822 HLC 10 x 60/25 10mm 50mm 385823 HLC 10 x 80/45 10mm 50mm 385824 HLC 10 x 100/65 10mm 50mm 385825 HLC 12 x 55/15 12mm 65mm 385826 HLC 12 x 55/15 bucket 12mm 65mm 385827 HLC 12 x 75/35 12mm 65mm 385828 HLC 12 X 75/35 bucket 12mm 65mm 385829 HLC 12 x 100/60 12mm 65mm 385830 HLC 16 x 60/10 16mm 75mm 385831 HLC 16 x 100/50 16mm 75mm 385832 HLC 16 x 140/90 16mm 75mm 385833 HLC 20 x 80/25 20mm 85mm 385834 HLC 20 x 115/60 20mm 85mm 385835 HLC 20 x 150/95 20mm 85mm MECHANICALLY COATED CORROSION PROTECTION (galvalloy 50) 3405675 HLC F 8 x 40 8mm 40mm 3405676 HLC F 10 x 50 10mm 47mm 3405677 HLC F 10 x 60 10mm 47mm 3405678 HLC F 10 x 80 10mm 47mm 3405679 HLC F 12 x 55 12mm 56mm 3405680 HLC F 12 x 75 12mm 56mm STAINLESS STEEL (316 grade) 3405504 HLC R 6.5 x 40 6.5mm 30mm 3405505 HLC R 6.5 x 60 6.5mm 30mm 3405506 HLC R 8 x 40 8mm 40mm 3405507 HLC R 8 x 65 8mm 40mm 3405508 HLC R 10 x 40 10mm 50mm 3405509 HLC R 10 x 60 10mm 50mm 3405510 HLC R 10 x 80 10mm 50mm 3405621 HLC R 10 x 100 10mm 50mm 3405622 HLC R 12 x 55 12mm 65mm 3405623 HLC R 12 x 75 12mm 65mm 3405624 HLC R 12 x 100 12mm 65mm
M5 M5 M5 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M16 M16 M16 M6 M8 M8 M8 M10 M10 M5 M5 M6 M6 M8 M8 M8 M8 M10 M10 M10
5mm 20mm 40mm 10mm 10mm 25mm 40mm 55mm 5mm 15mm 15mm 25mm 45mm 65mm 15mm 15mm 35mm 35mm 60mm 10mm 50mm 90mm 25mm 60mm 95mm 12mm 18mm 28mm 48mm 17mm 37mm 20mm 40mm 10mm 35mm 5mm 25mm 45mm 65mm 15mm 35mm 60mm
100 100 100 100 500 100 100 100 50 50 400 50 50 50 50 250 50 200 25 25 10 10 10 10 10 100 100 50 50 50 50 100 100 100 100 100 50 50 50 50 50 25
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 170 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
STANDARD (zinc plated) 385856 HLC-SK 6.5 x 45/20 6.5mm 30mm 385857 HLC-SK 6.5 x 65/40 6.5mm 30mm 385858 HLC-SK 6.5 x 85/60 6.5mm 30mm 385859 HLC-SK 8 x 60/25 8mm 40mm 385861 HLC-SK 8 x 90/55 8mm 40mm 385863 HLC-SK 10 x 85/45 10mm 50mm 385864 HLC-SK 10 x105/65 10mm 50mm 385865 HLC-SK 10 x 130/95 10mm 50mm STAINLESS STEEL (316 grade) 3405588 HLC R 6.5 x 45 F 6.5mm 30mm 3405589 HLC R 6.5 x 60 F 6.5mm 30mm 3405590 HLC R 8 x 60 F 8mm 40mm 3405631 HLC R 8 x 85 F 8mm 40mm HLC-SK 6.5 uses PZ3 / HLC-SK 8 uses T30 / HLC-SK 10 uses T40
M5 M5 M5 M6 M6 M8 M8 M8 M5 M5 M6 M6
20mm 40mm 60mm 25mm 55mm 45mm 65mm 95mm 28mm 43mm 39mm 68mm
100 100 100 100 100 100 100 100 100 100 100 100
STANDARD (zinc plated) 385836 HLC-H 8 x 40/10 385838 HLC-H 8 x 55/25 385841 HLC-H 10 x 40/5 385842 HLC-H 10 x 60/25 385845 HLC-H 10 x 80/45 385848 HLC-H 12 x 55/15 385849 HLC-H 12 x 75/35 385852 HLC-H 12 x 100/60 385853 HLC-H 16 x 60/10 385854 HLC-H 16 x 100/50 385855 HLC-H 16 x 140/90 STAINLESS STEEL (316 grade) 3405632 HLC R 8 x 40 H 3405633 HLC R 8 x 65 H 3405634 HLC R 10 x 40 H 3405635 HLC R 10 x 60 H
8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 16mm 16mm 16mm 8mm 8mm 10mm 10mm
40mm 40mm 50mm 50mm 50mm 65mm 65mm 65mm 75mm 75mm 75mm 40mm 40mm 47mm 47mm
10mm 25mm 5mm 25mm 45mm 15mm 35mm 60mm 10mm 50mm 90mm 12mm 37mm 8mm 28mm
100
100 100 100 100 100 100 100 100 100 100 100 100 100 100
385877
HLC 6.5 x 25 T
6.5mm
30mm
M5
50
100
HLC eyebolt
Item no. Ordering designation Hole dia. Min. Hole .Depth Thread Size Package contents Price per
385875 385871
8mm 8mm
40mm 40mm
M6 M6
50 50
100 100
Item no.
Ordering designation
Hole dia.
Thread Size
Package contents
Price per
064136 064137
6mm 8.5mm
35mm 40mm
M6 M8
8mm 6mm
100 100
100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 171
Anchor systems
HT frame anchor
Complete metal frame anchor comprising anchor body, expansion cone and screw. Applications I Fastening door and window frames
Features I No risk of distortion or forces of constraint I Expansion cone cannot be lost I Use in a wide range of base materials - concrete - lightweight and gas concrete - hard and soft natural stone - solid brick - cavity/perforated brick I Anchor body: steel of grade 4.8, zinc plated to 5 microns, chromated Sleeve: Steel 02 Z DIN 17162, Sendzimir galvanised to 20 microns
HT10
With countersunk head screw (set with Posi-Drive No.3)
Item no. Ordering designation Hole dia. Hole Depth Anchor Length Package contents Price per
369266
HT 10/132
10mm
40mm
132mm
100
100
Features I One piece metal hanger. I Easily set: Just hammer home, into hole, using claw hammer, pull back to set
Item no.
Ordering designation
Hole dia.
Anchor Length
Package contents
Price per
3405658
HCA
6.5mm
40mm
55mm
100
100
Features I Setting by impact expansion I Automatic follow-up expansion, thus safe fastening I Fire rated I Steel St 3k40 (body) and Ck 60 (wedge), zinc plated to 5 microns
Nrec. = Tensile working load (static) in concrete fc,cyl 20-45 MPa., 1.6 kN for both sizes Vrec. = Shear working load (static) in concrete fc,cyl 20-45 MPa., 1.6 kN for both sizes DBZ 6/4.5 and DBZ 6/35 wedge anchor
Item no. Ordering designation Hole dia. Min. Hole Depth Anchor Length Max Fasten. Thickness Package contents Price per
256312 256311
6mm 6mm
41mm 41mm
49mm 79mm
5mm 35mm
100 100
100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 172 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Features I Prefitted screw I Ergonomic setting tool for thread size M4 to M8 I Quick and trouble-free installation
HHD-S M4/12 x 38 HHD-S M4/19 x 45 HHD-S M5/12 x 52 HHD-S M5/25 x 65 HHD-S M6/9 x 38 HHD-S M6/12 x 52 HHD-S M6/24 x 65 HHD-S M6/40 x 80 HHD-S M8/12 x 54 (Hex head)
M4 M4 M5 M5 M6 M6 M6 M6 M8
100 50 50 50 100 50 50 50 50 1
Features I "Shark's tooth" design for correct positioning and quick installation I Cuts its own thread I One Hilti bit for anchor and screw. No setting tool required. I HSP and HFP delivered with or without screws
HSP HFP
HP-S
Item no. Ordering designation
HFP-S
Screw Guage Base material Thickness
HSP (zinc) HSP-S (zinc) (includes screw) HFP (nylon) HFP-S (nylon) (includes screw) D-B PH2 HSP/HFP insert bit
8g 8g 8-10g 8-10g
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 173
Anchor systems
I I I I
Various base materials: - reinforced concrete - hard natural stone - solid bricks - aerated concrete - hollow/cavity brick masonry Cladding/facade installation (metal frames/structures) Metal construction (installing metal parts) Roofing installation Fastening door and window frames
HRD-U8
8 mm 50 mm 1.2 kN 0.4 kN 0.14 kN
Technical data
Drill Diameter Min Anchor Dept Non-cracked concrete fcc => 20N/mm2 Solid brick Hollow brick
HRD-U10
10 mm 80 mm 1.6 kN 1.2 kN 0.4 kN
HRD-U14
14 mm 85 mm 1.8 kN 1.3 kN 0.6 kN
HRD-UGT 8x60/10 HRD-UGT 8x80/30 HRD-UGT 8x100/50 HRD-UGT 8x120/70 HRD-UGT 8x140/90 S-B Tx30 torx bit
8 8 8 8 8
50 50 50 50 50
10 30 50 70 90
50 50 50 50 50 1
For assistance in anchor design contact your local Hilti Engineer or call 131 292 174 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
HRD-U 10
Plastic anchor body, screw steel, zinc plate
Item no. Ordering designation
HRD-UGS HEXAGON HEAD SCREW 257277 HRD-UGS 10 x 80/10 257278 HRD-UGS 10 x 100/30 257279 HRD-UGS 10 x 120/50 257280 HRD-UGS 10 x 140/70 257281 HRD-UGS 10 x 180/110 060186 13mm (M8) drive socket - 1/2" conn. 032220 TE-C shaft 1/2"
50 50 50 50 50 1 1 50 50 50 50 50 50 50 50 50 50 50 1 1 50 50
100 100 100 100 100 1 1 100 100 100 100 100 100 100 100 100 100 100 1 1 100 100
HRD-UFS HEXAGON HEAD SCREW (hot-dipped galvanised) 066453 HRD-UFS 10 x 80/10 10mm 066454 HRD-UFS 10 x 100/30 10mm 066455 HRD-UFS 10 x 120/50 10mm HRD-URS HEXAGON HEAD SCREW (stainless steel grade 316) 257291 HRD-URS 10 x 80/10 10mm 257292 HRD-URS 10 x 100/30 10mm 257293 HRD-URS 10 x 120/50 10mm HRD-UGT COUNTERSUNK HEAD SCREW 257272 HRD-UGT 10 x 80/10 257273 HRD-UGT 10 x 100/30 257274 HRD-UGT 10 x 120/50 257275 HRD-UGT 10 x 140/70 257276 HRD-UGT 10 x 180/110 258146 TS-B Tx40 torx bit 306013 TE-C screwdriving adaptor 10mm 10mm 10mm 10mm 10mm
80mm 80mm 80mm 80mm 80mm 80mm 80mm 80mm 80mm 80mm 80mm
10mm 30mm 50mm 10mm 30mm 50mm 10mm 30mm 50mm 70mm 110mm
HRD-URT COUNTERSUNK HEAD SCREW (stainless steel grade 316) 257289 HRD-URT 10 x 80/10 10mm 257290 HRD-URT 10 x 120/50 10mm
80mm 80mm
10mm 50mm
HRD-U 14
Plastic frame anchor
Item no. Ordering designation
HRD-UGT Countersunk head screw 312622 Frame Anchor HRD-UGT 14 x 80/10 312623 Frame Anchor HRD-UGT 14 x 110/40 312624 Frame Anchor HRD-UGT 14 x 140/70 312625 Frame Anchor HRD-UGT 14 x 160/90 312626 Frame Anchor HRD-UGT 14 x 180/110 257257 Bit holder S-BH 50 M 315122 Screwdriver bit S-B TX 50 HRD-UGS Hexagon head screw 312632 Frame Anchor HRD-UGS 14 x 80/10 312633 Frame Anchor HRD-UGS 14 x 110/40 312634 Frame Anchor HRD-UGS 14 x 140/70 312635 Frame Anchor HRD-UGS 14 x 160/90 312636 Frame Anchor HRD-UGS 14 x 180/110 335632 NSD 171/2 socket wrench insert 032220 TE-C SHAFT 1/2
50 50 50 50 50 1 1 50 50 50 50 50 1 1
100 100 100 100 100 1 1 100 100 100 100 100 1 1
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 175
Anchor systems
Features I High-quality polyamide PA 6 plastic anchor, with no cadmium I Easy to use I Good resistance to turning in the hole when setting screw I Wide range of screws can be used
5 6 8 10 12
Item no.
Package contents
Price per
Rec. tensile load in 2.5 MPa aerated concrete Rec. tensile load in 5 MPa aerated concrete Rec. tensile load in 7.5 MPa aerated concrete Nominal drill bit diameter Min. hole depth Screw diameter Anchor length
Ordering designation
Features I High quality polyamide PA 6 plastic anchor with no cadmium I Accurate screw guidance I Good keying thanks to large fins I Resistance to turning in hole
Package contents
Price per
12mm 14mm
8-10mm 10-12mm
50 50 50
Rec. tensile load in drywall panel, a 12 mm Nominal drill bit diameter Panel / base material thickness Screw length Screw diameter Anchor length
Ordering designation
HLD 2 0.08 10 4 33 45 28
Hole dia.
HLD 3 0.08 10 15 40 45 35
Screw Gauge
Features I Made of quality PA 6 polyamide plastic I Resilient toggling action to suit every base material I Versatile in thin walled materials, even if they are of low strength I Resistance to rotation in hole I Bridges a large range of wall/panel thickness I Simple setting; just drill hole and push in I Setting check through noticeable increase in resistance when the screw has been driven home I Good screw guidance
Package contents
Price per
335506 335507
HLD 2 HLD 3
10mm 10mm
8g 8g
4-12mm 15-19mm
150 100
100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 176 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Features I High quality polyamide plastic body, screw zinc plated or stainless steel I Ready to use fastener for through fastening I Bridging of gaps due to collapsible section I Impact expansion by hammer of screwdriver I Only one anchor type required for both solid and hollow materials I Can be removed with a screwdriver I Quick and simple setting, easily expanded with a few blows of a hammer I Large programme of different versions, including stainless steel
Permissible load (kN) in concrete fc,cyl 20 MPa Tension Nrec Shear Vrec 0.05 0.15 0.16 (0,10) 1) 0.35 (0,30) 1) 0.25 0.55 (0,35) 2) 3) 0.40 (0,30) 0.90 (0,50) 3) 0.40
3)
0.50
STANDARD 260369 HPS-1 4/0 x 20 260395 HPS-1 5/0 x 20 260347 HPS-1 5/5 x 25 260348 HPS-1 5/15 x 35 260349 HPS-1 6/5 x 30 230516 HPS-1 6/10 x 35 260350 HPS-1 6/15 x 40 260351 HPS-1 6/25 x 50 260352 HPS-1 6/40 x 65 260353 HPS-1 8/10 x 40 230518 HPS-1 8/20 x 50 260354 HPS-1 8/30 x 60 230519 HPS-1 8/40 x 70 260355 HPS-1 8/60 x 90 260356 HPS-1 8/80 x 110 COUNTERSUNK HEAD 260375 HPS-1 5/15 S x 35 230529 HPS-1 5/30 S x 50 STAINLESS STEEL PIN 260357 HPS-1 R 5/5 x 25 260358 HPS-1 R 5/15 x 35 260360 HPS-1 R 6/15 x 40 260361 HPS-1 R 6/25 x 50
4mm 5mm 5mm 5mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 8mm 8mm 5mm 5mm 5mm 5mm 6mm 6mm
25mm 25mm 30mm 30mm 40mm 40mm 40mm 40mm 40mm 50mm 50mm 50mm 50mm 50mm 50mm 30mm 30mm 30mm 30mm 40mm 40mm
2mm 2mm 5mm 15mm 5mm 10mm 15mm 25mm 40mm 10mm 20mm 30mm 40mm 60mm 80mm 15mm 30mm 5mm 15mm 15mm 25mm
250 250 200 200 150 150 150 100 100 100 50 50 50 50 50 200 150 200 200 100 100
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 177
Anchor systems
IN insulation fastener
A plastic insulation fastener for insulating material up to 12cm thick, ideally soft insulating materials Applications I Fastening soft, non-self-supporting insulating materials, primarily mineral wool or glass wool I Wide variety of base materials - concrete - lightweight concrete - solid brick - cavity/perforated brick
Technical data
do h1 tfix I Nominal drill bit diameter (mm) Min. hole depth (mm) Max. fastenable thickness (mm) Fastener length (mm)
Features I Slabs, panels, mats are reliably held down by 4 claws at the corner joint I Made entirely of polypropylene plastic (not UV resistant) I Slabs, panels, mats are reliably held down by 4 claws at corner joint I In place temperature range:- 40C to + 80C.
3/4
8 50 40 69
5/6
8 50 60 89
7/8
8 50 80 109
9/10
8 50 100 129
Item no.
Ordering designation
Hole dia.
Insulation thickness
Package contents
Price per
L L L
Technical data
do h1 tfix I Nominal drill bit diameter (mm) Min. hole depth (mm) Max. fastenable thickness (mm) Fastener length (mm)
2/4
8 50 40 70
4/6
8 50 60 90
6/8
8 50 80 110
8/10
8 50 100 130
Features I Excellent bonding of plaster on specially structured fastener head I Especially designed head to help ensure bonding of plaster applied directly over the fastener I Suitable for a wide variety of base materials I No metal parts which reduces potential condensation behind a finished face I Polypropylene material (not UV resistant) I In place temperature range: - 40C to + 80C
Item no.
Ordering designation
Hole dia.
Insulation thickness
Package contents
Price per
L L L
For assistance in anchor design contact your local Hilti Engineer or call 131 292 178 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Threaded rod
Item no. Ordering designation Price per
ZINC PLATED TO MIN. 8 MICRONS 216410 M6 x 1m 216413 M8 x 1m 216416 M10 x 1m 216419 M12 x 1m 216422 M16 x 1m 216425 M20 x 1m 216426 M24 x 1m 216412 M6 x 3m 216415 M8 x 3m 216418 M10 x 3m 216421 M12 x 3m 216424 M16 x 3m 058889 M20 x 3m 053560 M24 x 3m HOT DIPPED GALVANISED TO MIN 50 MICRONS 3092017 M10 x 1m 3407978 M10 x 3m 3092022 M12 x 1m 3092018 M16 x 1m 3092019 M20 x 1m 3092020 M24 x 1m STAINLESS STEEL (316 GRADE, A4-50, 500MPa) 058665 M6 x 1m 058666 M8 x 1m 058670 M10 x 1m 058671 M12 x 1m 058683 M16 x 1m 058688 M20 x 1m 065053 M24 x 1m
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Couplers
Item no. Ordering designation Price per
216704 216705
100 100
ZINC PLATED TO MIN. 8 MICRONS 3405716 M6 3405717 M8 3405718 M10 3405719 M12 3405720 M16 3405721 M20 3405722 M24 HOT DIPPED GALVANISED TO MIN 50 MICRONS 3405662 M12 3405663 M16 3405664 M20 3405665 M24 STAINLESS STEEL (316 GRADE A4-50, 500MPa) 3405710 M8 3405711 M10 3405712 M12 3405713 M16 3405714 M20 3405715 M24
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 179
Anchor systems
Flat washer
Item no. Ordering designation Package contents Price per
ZINC PLATED TO MIN. 8 MICRONS 3405723 M6 3405724 M8 3405725 M10 3405726 M12 3705727 M16 3405728 M20 3405729 M24 HOT DIPPED GALVANISED TO MIN. 50 MICRONS 3405666 M12 3405667 M16 3405668 M20 3405669 M24 STAINLESS STEEL (316 GRADE, A4-50, 500MPa) 3405703 M8 3405704 M10 3405705 M12 3405706 M16 3405708 M20 3405709 M24
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
217979
50
100
Masonry plug
Item no.
Ordering designation
Hole dia.
Package contents
Price per
3427997
MP1
6mm
100
100
Cable ties
Item no. Ordering designation Length Width Max bundle dia. Package contents Price per
BLACK (UV RESISTANT) 246693 ECT-UV 98/2.5 251627 ECT-UV 140/3.6 251630 ECT-UV 200/4.8 246695 ECT-UV 290/4.8 246696 ECT-UV 360/4.8
For assistance in anchor design contact your local Hilti Engineer or call 131 292 180 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
Installation accessories
Wedge nut
VF 14 M10 TI rod hanger HW 10 wedge nut PCH M10 pipe clip hanger
25 100 100
LB 12 (10m roll) LB 17 (10m roll) LB 26 (10m roll) LBK (plastic coated - 10m roll)
20 20 20 10
1 1 1 1
Item no.
Ordering designation
Package contents
Price per
3405640
100
100
Item no.
Ordering designation
Hole dia.
Anchor length
Package contents
Price per
3405638 3419513
HD 522 HD 6532
5mm 6.5mm
20mm 22mm
22mm 32mm
5mm 12mm
100 100
100 100
PB brass anchor
Item no.
Ordering designation
Hole dia.
Anchor length
Package contents
Price per
PB M6 PB M8 PB M10
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 181
Anchor systems
PROFIS Anchor
More features for design freedom
Hilti PROFIS Anchor offers more flexibility and functionality than any other anchor design program. Included within the software are a number of features, exclusive to Hilti, that greatly enhances the users choice and efficiency. I Easy-to-use 3D interactive display I Change and modify designs at the touch of a button I A comprehensive easy-to-use anchor selector I A database of CAD drawings for all Hilti anchors which can be exported to other formats I 3D baseplate design plus finite element analysis for baseplate thickness calculations I Personalised settings for user-defined views PROFIS anchor is available free of charge. Download it at www.hilti.com.au, or order it on CD ROM, ring 131 292. Your local Hilti Engineer will be pleased to show it to you
Other major features include: I Fully defined designs I Graphical input with all dimensions and loadings visible I User-defined print output I Easy-to-understand anchor setting animations I Supports 13 different anchor design methods and 16 languages I Always up to date with regular downloads and add-ons I Workshop drawings to ensure the fabricators get it right
PROFIS Rebar
Simply designed
Design at your fingertips Hilti PROFIS Rebar is a new PC application that makes the calculation of rebar overlap lengths and embedment depths easier than ever before it quite simply puts the design of post-installed rebar connections at your fingertips. Furthermore, the higher bond strength offered by Hilti HIT injection mortars and the Hilti design method even allow designers to go beyond the requirements of the code. Advantages of Hilti PROFIS Rebar I Comprehensive range of templates for the design of concrete-toconcrete connections I All design-relevant data can be entered and altered directly on the 3D graphics model I All relevant technical data and installation instructions can be printed out in the form of detailed, clearly-structured reports
For assistance in anchor design contact your local Hilti Engineer or call 131 292 182 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au
Anchor systems
For assistance in anchor design contact your local Hilti Engineer or call 131 292 Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au 183