Documente Academic
Documente Profesional
Documente Cultură
Installation Material
Agenda
1- MPT Antennas and Couplers 2- MPT indoor/outdoor connections 3- Detailed connection on MPT 4- 9500 MPR indoor accessories 5- 9500 MPR Saving on services in case of AWY reuse 6- 9500 MPR Use of ODU300
9500 MPT
Antennas and Couplers
Expanded family
we are now offering all the couplers in 3 dB and 10 dB. frequency bands:
6 GHz 7/8 GHz 11 GHz 13-15 GHz 18-25 GHz 28-38 GHz
9500 MPT
indoor/outdoor connections
Up to 100m
Power extractor
Cf details in another slide
CAT5e RJ45 Ethernet CAT5e and RJ45 Coaxial cable QMA and N
Ethernet CAT5e
An existing AWY coax cable can be reused by changing the indoor connector.
7 | 9500 MPR detail product presentation Copyright XXXX Alcatel-Lucent. All rights reserved.
2x Coax connection (power feed in case of Optical connection) 2x SFP ports for optical connection option
2x 1000BaseT port with Power over CAT5e cable (Electrical connectivity Data+Power over a single CAT cable)
Up to 350m
fiber
Fiber
LC-LC
Coaxial cable low pass filter +lightning arrestor + Pigtail battery Optical connection LC-xx
Ethernet CAT5e
low pass filter 1AB251350001 + lightning arrestor 3CC50030AAAA Pigtail N-two wires 3CC52159AAXX battery NB: lightning arrestor is same as MXC
Coaxial cable +lightning arrestor Ethernet CAT5e + low pass filter Optical cable Coaxial cable +lightning arrestor + low pass filter + pigtail battery
+ pigtail
battery
MSS4/8
MSS-1c
Power + data
Power injector box Power Injector plug-in
powering of two MPT lightning protection DC protection LEDs for power output
Copyright XXXX Alcatel-Lucent. All rights reserved.
Battery 1 Battery 2
13 | 9500 MPR detail product presentation
9500 MPT
Detailed connection on MPT
MPT-HC cat5e
MPT-HC fiber
o The fiber cord is made in factory at different lengths, with the nut in place
o optionnally, supports for overlengths can be provided 19 drawer 1U for up to 25m outdoor support up to 100m (cf on the right)
o Due to the high bit rate, it is necessary to have a direct connection between two MPT in 1+1 configuration.
o This cord exists in three lengths to allow space diversity. o In case of maintenance on one ODU, the ODC-ODC cord can be removed without having to open the cobox of the other ODU.
Power Extractor
o The power extractor is a kit including the power and data jumpers towards MPT, as well as a R2CT protection for the cat5e cable from the MSS.
o All three ports are protected against lightning. o The R2CT is shown above in the open and closed positions.
MPT-MC
o Cat5e cable is made on site according to desired length, it transports both power and data. o Watertightness thanks to the R2CT connector (same as on Power extractor).
9500 MPR
Indoor accessories
Power cables
MSS4/8
A 4m equipped cord is delivered with MSS4/8. Suitable up to the maximum capacity of 12 MPT In the rare cases where this length is not sufficient, cable and connector can be ordered separately.
MSS-1c A 2x1 mm cable is required, it is cut at the desired length on site and screwed on the front panel connector.
They are the standard tributaries cables already used with Mlodie and AWY 16 E1 They can be used with MSS-1c, and also with MSS4/8 in combination with a Y cord. Short cables with connectors for integrated DDF, or long cables w/o coax connectors for distant DDF.
The protection is insured with a X cord 2 x SCSI68 to 2x Dsub37, and then the same tributary cables are used.
short cables for integrated DDF SCSI68 to 4 terminal blocks for MSS4/8 (same as AWY 32 E1) Dsub37 to 2 terminal blocks for MSS-1c, or for MSS4/8 combined with the Y cord (same as AWY 16 E1 or Mlodie) long cables for distant DDF SCSI68 -- free or Dsub37 -- free
short cables for integrated DDF two SCSI68 to 4 terminal blocks or X cord and two Dsub37 to 2 terminal blocks to reuse existing cords.
Integrated DDF
The integrated DDF are mounted in the MSS rack and support the connectors of the tributary cables.
they are an alternative to the previous cables, and combine protection and distribution they are connected to MSS with:
2 E1 SFP modules
2 x SubD 15 female connector for service channels transport 1 x SubD 15 female connector for housekeeping
9500 MPR
Saving on services in case of AWY
swap
Few equipment to be uninstalled (IDU and ODU) No need to assemble, haul and align (time consuming !) a new antenna The E1 tributary cables, with their connection to a DDF can be kept.
On average, the installation and commissioning of a new link is reduced by 40% when reusing AWY installation material.
9500 MPR
Use of ODU300
ODU 300
MXC Integrated antennas and couplers, plus the coax cables can be reused