Sunteți pe pagina 1din 1

RISO EZ 200

P96-569 = Either The Print Drum Color Information or Ink Catagory Information Is Still Not Input And D04-560 = Ink Tag Is Not Detected On Ink Bottle This Error posible Appear if you insert a diffrent type of Drum (Drum EZ-330 To EZ-230). Check that ur drum type is right. and try to Re Installing ur drum. 1. Insert Ink Catridge to drum 2. Switch on the machine and enter the test mode (Do not insert drum to the machine) 3. Insert Drum to the machine pres Reset key if error appear 3. Enter test Mode 117 and start 4. Enter test mode 890 and start (this test mode will copies the ink information eg; ink color, ink catagory, etc onto the print drum PCB 5. Enter test Mode 887 and start (this test mode will pump ink from ink bottle to print drum) and drum will rotate and one page master will clamp to the print drum, wait until ur print drum stop. 6. Switch off and on machine If ur machine still error try to replace ur Print drum PCB to the new one. Thanks good luck

S-ar putea să vă placă și