Documente Academic
Documente Profesional
Documente Cultură
X-polarized (+45 and -45). UV resistant fiberglass radomes. Wideband vector dipole technology. DC Grounded metallic parts for impulse suppression.
10
30
30
0o
33 0o 0o
20
General specifications:
790960 MHz <1.5:1 50 ohms IM3: <-150 dBc +45 and -45 400 watts per input (at 50C) 2 x 7-16 DIN female >30 dB 23.1 lb (10.5 kg) 76.1 x 10.2 x 3.9 inches (1934 x 259 x 99 mm) Wind load at 93 mph (150kph) Front/Side/Rear 153 lbf / 70 lbf / 203 lbf (680 N) / (310 N) / (900 N) Wind survival rating* 120 mph (200 kph) Shipping dimensions 87.2 x 11.5 x 7.6 inches (2216 x 292 x 192 mm) Mounting Fixed and tilt mount options are available for 2 to 4.6 inch (50 to 115 mm) OD masts. See reverse for order information. * Mechanical design is based on environmental conditions as stipulated in EIA-222-G (April 2007) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details. Frequency range VSWR Impedance Intermodulation (2x20w) Polarization Maximum input power Connector Isolation Weight Dimensions
270o
60
30
90o
24
0o
12
0o
15
21
0o
0o
180o
30
30
33 0o 0o
20
60
30
270o
90o
24
0o
12
0o
15
21
0o
0o
180o
Specifications:
tilt dBi Front-to-back ratio Horizontal beamwidth Vertical beamwidth Electrical downtilt continuously adjustable Sidelobe suppression for: First sidelobe above main beam Vertical pattern Cross polar ratio Main direction 0 Sector 60 Average gain
790862 MHz 824894 MHz 0 5 10 0 5 10 16.2 16.4 16.2 16.3 16.6 16.3 >24 dB (co-polar) >25 dB (co-polar) 69 (half-power) 68 (half-power) 10 (half-power) 9.9 (half-power) 010 010 (manual or optional remote control) 0 5 10 T 18 18 18 dB 20 dB (typical) >10 dB 0 5 10 T 18 18 18 dB 20 dB (typical) >10 dB
880960 MHz 0 5 10 16.6 16.8 16.6 >25 dB (co-polar) 65 (half-power) 9.7 (half-power) 010 0 5 10 T 18 18 18 dB 20 dB (typical) >10 dB
* Mechanical design is based on environmental conditions as stipulated in TIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details.
11230-B 936.3599/a Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: communications@kathrein.com Internet: www.kathrein-scala.com Fax: (541) 779-3991
35 mm M6
64 mm M8
76.1 inches (1934 mm) 77.3 inches (1964 mm) 78.9 inches (2004 mm)
3.9 inches (99 mm) 10.2 inches (259 mm) Profile PC2
790960 45o
790960 +45o
7-16
7-16
Order Information:
Model 800 10634 Description Antenna with 7-16 DIN connectors
All specifications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: communications@kathrein.com Internet: www.kathrein-scala.com Fax: (541) 779-3991