Sunteți pe pagina 1din 2

Preliminary

800 10727 65 Panel Antenna

X-polarized (+45 and -45). UV resistant pulltruded radomes. Wideband vector dipole technology. DC Grounded metallic parts for impulse suppression. General specifications:
Frequency range 17102690 MHz VSWR <1.5:1 Impedance 50 ohms Intermodulation (2x20w) IM3: <-150 dBc Polarization +45 and -45 Connector 6 x 7-16 DIN female Electrical downtilt 012 (continously adjustable) Isolation, between ports >30 dB Maximum input power 300 watts (at 50C) per input Weight 44.1 lb (20 kg) 48.5 lb (22 kg) clamps included Dimensions 55.1 x 14 x 3.3 inches (1400 x 355 x 83 mm) Wind load at 93 mph (150kph) Front/Side/Rear 286 lbf / 50 lbf / 297 lbf (1270 N) / (220 N) / (1320 N) Mounting category H (Heavy) Wind survival rating* 120 mph (200 kph) Shipping dimensions 78.7 x 20.5 x 3.9 inches (2000 x 520 x 100 mm) Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm) OD masts are included and tilt options are available. See reverse for order information.

1710 1990 MHz: +45/45 Polarization


125 68 7.1

10 3 0

10

dB

Horizontal Pattern

Vertical Pattern 0 12 electrical downtilt

1920 2200 MHz: +45/45 Polarization


120 64 6.5

10

10

dB

Horizontal Pattern

Vertical Pattern 0 12 electrical downtilt

2490 2690 MHz: +45/45 Polarization


110 60

dB

dB

5.7

10

10

dB

Horizontal Pattern

Vertical Pattern 0 12 electrical downtilt 24902690 MHz 18 dBi 60 (half-power) 5.7 (half-power) >25 dB 0 6 12 T >18 18 16 dB 25 dB (typical) >10 dB

Specifications:

17101990 MHz Gain 17.5 dBi +45 and -45 polarization 68 (half-power) horizontal beamwidth +45 and -45 polarization 7.1 (half-power) vertical beamwidth Front-to-back ratio (co-polar) >25 dB Sidelobe suppression for 0 6 12 T first sidelobe above main beam >18 18 18 dB Cross polar ratio 0 25 dB (typical) Sector 60 >10 dB

19202200 MHz 17.8 dBi 64 (half-power) 6.5 (half-power) >25 dB 0 6 12 T >18 18 18 dB 25 dB (typical) >10 dB

22002490 MHz 18 dBi 61 (half-power) 5.9 (half-power) >25 dB 0 6 12 T >18 17 17 dB 25 dB (typical) >10 dB

* Mechanical design is based on environmental conditions as stipulated in EIA-222-G-2 (December 2009) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details.
1710 2690 +45 1710 2690 45 1710 2690 +45 1710 2690 45 1710 2690 +45 1710 2690 45

7-16

7-16

7-16

7-16

dB

7-16

7-16

11432-FRO 936.A2840/c Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: communications@kathrein.com Internet: www.kathrein-scala.com Fax: (541) 779-3991

Preliminary

800 10727 65 Panel Antenna

64 mm M8

2 x 738 546 Mounting Kit (included)


Mounting Options:
Model 2 x 738 546 (included) 850 10008 Description Mounting Kit for 2 to 4.6 inch (50 to 115 mm) OD mast. 4.4 lb (2 kg) Tilt Mount Kit 08 degrees downtilt angle. 14.3 lb (6.5 kg)

Order Information:
Model 800 10727 Description Antenna with 6 x 7-16 DIN connectors

All specifications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: communications@kathrein.com Internet: www.kathrein-scala.com Fax: (541) 779-3991

S-ar putea să vă placă și