0 evaluări0% au considerat acest document util (0 voturi)
65 vizualizări1 pagină
In the former, the wet material is exposed to the hottest air, which enables heat sensitive or sticky materials to be dried successfully. In the counter-current operation dried material is exposed. To the hot air helping to achieve very low moisture content. The hot gases may enter the dryer at very high temperature. Dedicated fluid heating and circulating systems. These can be steam or electrically heated.
In the former, the wet material is exposed to the hottest air, which enables heat sensitive or sticky materials to be dried successfully. In the counter-current operation dried material is exposed. To the hot air helping to achieve very low moisture content. The hot gases may enter the dryer at very high temperature. Dedicated fluid heating and circulating systems. These can be steam or electrically heated.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
In the former, the wet material is exposed to the hottest air, which enables heat sensitive or sticky materials to be dried successfully. In the counter-current operation dried material is exposed. To the hot air helping to achieve very low moisture content. The hot gases may enter the dryer at very high temperature. Dedicated fluid heating and circulating systems. These can be steam or electrically heated.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
is exposed to the hottest air helping to Features :
• All contact parts of made out of SS 316 / SS 316 L quality Material achieve very low moisture content. The in GMP Models and Mild steel externals with SS 304 Internals in hot gases may enter the dryer at very high standard Models. temperature. • Shell Materials are with SS 316 / SS 316 L for GMP Models and SS 304 for Non – GMP Model. • Jacket Materials are made out of SS 304 for GMP Models and MS for Non – GMP Models. • Cladding is made out of SS 304 for GMP Model and MS For Non- GMP Model . • Internal Finishing will be Mirror polish, and External finish will be Mat finish. • Cyclone Separators is Provided for all Models. • Condenser and condensate Receivers are provided for all Models. • Validation ports and nitrogen purge Nozzles are provided • Can be designed to customers specifications requirements. Optional: • Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid. ( for Temperature requirements above 95º C )