Documente Academic
Documente Profesional
Documente Cultură
Legris ()
www..com
Industrial Valves
Industrial Valves
Ball Valves, Universal Series
(P. 6-8)
Legris ()
Fluids: compressed air, slightly corrosive fluids Materials: nickel-plated forged brass Pressure: 40 bar Temperature: -20C to +80C : 4 mm to 40 mm
Fluids: compressed air, slightly corrosive fluids Materials: nickel-plated forged brass Pressure: 40 bar Temperature: -20C to +80C : 4 mm to 23 mm
Fluids: compressed air, slightly corrosive fluids Materials: nickel-plated forged brass, galvanised steel and epoxy locking system Pressure: 40 bar Temperature: -20C to +80C : 4 mm to 23 mm
Fluids: compressed air, many fluids Materials: nickel-plated forged brass, choice of seal material (NBR, EPDM, FKM, PTFE...) Pressure: 40 bar Temperature: -20C to +100C : 4 mm to 40 mm
Fluids: compressed air, slightly corrosive fluids Materials: forged brass or nickel-plated forged brass Pressure: 12 bar Temperature: -20C to +80C : 4 mm to 13 mm
Fluids: compressed air, water, gas Materials: nickel-plated forged brass Pressure: 40 bar Temperature: -40C to +170C : 8 mm to 50 mm
Fluids: compatible fluids Materials: nickel or chromium-plated brass with PTFE seal Pressure: 35 bar Temperature: -20C to +130C : 8 mm to 100 mm
Fluids: all fluids Materials: 316L stainless steel Pressure: 65 bar Temperature: -20C to +150C : 8 mm to 50 mm
Fluids: all fluids Materials: 316L stainless steel Pressure: 65 bar Temperature: -20C to +120C : 4 mm to 10 mm
6- 4
www..com
Industrial Valves
Ball Valves, High Pressure Series
(P. 6-30)
Legris ()
Fluids: lubricants, gases Materials: zinc-plated brass Pressure: 300 bar Temperature: -15C to +80C : 7 mm to 13 mm
Fluids: compressed air Materials: technical polymer Pressure: 10 bar Temperature: -20C to +80C : 4 mm to 12 mm
Fluids: water, beverages, CO2, inert gases Materials: polypropylene, EPDM seal Pressure: 10 bar Temperature: -15C to +100C Tube : 1/4" and 3/8"
Butterfly Valves
(P. 6-42)
Fluids: compressed air, industrial fluids Materials: shot-blasted forged brass, nickel-plated Pressure: 120 bar Temperature: -20C to +100C : 4 mm to 10 mm
Fluids: all fluids Materials: 316L stainless steel Pressure: 400 bar Temperature: -20C to +180C : 3 mm to 6 mm
Fluids: compressed air, abrasive fluids Materials: shot-blasted forged brass, nickel-plated Pressure: 16 bar Temperature: -20C to +80C : 6 mm to 18 mm
Axial Valves
(P. 6-45)
Fluids: compressed air, industrial fluids Materials: nickel-plated brass Pressure: 10 bar Temperature: -20C to +135C Threads : 3/8" to 2"
www..com
6- 5
Legris ()
0402
2/2 Page 6-10
0401
0400
0411
0414
0446
6402
6401
Right-Angled
In-Line, 3-Way
0472
0471
0482
0483
0448
0452
0489
0449
0469
0462
0461
In-Line, Vented
In-Line, 3-Way
0432
0439
0436
0437
0438
Universal Light Series In-Line In-Line, Vented In-Line with Square Stem
0492
0491
0490
0494
0497
0496
6- 6
www..com
Legris ()
BVG4-L
2/2 Page 6-21
BVGT4-L
2/2 Page 6-21
4902
BVGT4-C
2/2 Page 6-23
4991
4992
BVG4-LOCK
2/2 Page 6-24
BVG4P-LOCK
3/2 Page 6-24
4832
4812
4810
0465
4402
7910
7911
7913
7914
7000
Page 6-33
4020
4021
4023
4022
3130
Page 6-35
www..com
6- 7
Industrial Valves
Ball Valves
Legris ()
This range of valves has patented seal wear compensating technology for reliable and durable sealing, protecting any system whether under pressure or vacuum.
Product Advantages
Durability Automatic seal wear compensation for long-term reliability & Reliability Robust, corrosion-resistant materials
100% leak-tested in production Date coding to guarantee quality and traceability
Versatility Ideal for ensuring the performance of pneumatic circuits & Performance Customised valves for all special applications
Unequalled performance under vacuum Smooth operation thanks to self-lubricating seals Large range of working pressures and temperatures Lever can be repositioned and replaced Many configurations to satisfy all system requirements
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature
Component Materials
Industrial fluids
Stem: brass Lever fixing screw: galvanised steel
Vacuum to 40 bar
Lever: treated zamak
-20C to + 80C
Stem seal: NBR
G1 0.50 to 0.70
Seat seal: graphite-impregnated polyamide Wear-compensation seal: NBR
Silicone-free
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99 % vacuum).
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH)
6- 8
www..com
Universal Series
Installation Options
Lockable Valves
Legris ()
Mountable Valves On steel plate: bulkhead xing complete valve below bulkhead On frame: assemble with bolts On wooden panel: assemble with woodscrews
Our lockable ball valves have been developed in order to prevent potentially dangerous consequences caused by unintended operation. Lockable in different positions, this range meets international safety requirements, such as ISO 4414. The valves are lockable: at one point: models 0432 and 0439 at three points: models 0437 and 0438 Vented Valves To stop uid circulation and vent the circuit, 2 venting systems are provided: with threaded exhaust, to allow discharge of downstream media with pin-hole vent, for applications with no special discharge requirement Fluid ow direction is indicated by an arrow on the valve body.
Universal Customised Valve Series Based on the standard components of the universal series, this range allows the valve to be adapted to specic needs. There are 6 product versions available on request. Product Codes
Valve type 0400 0401 0402 ... 04 = 4 mm 05 = 5 mm ... 40 = 40 mm
Identification Each series may be easily identified by a colour marking on the lever.
0402 04 10 22
Sufx Thread 10 = 1/8" 13 = 1/4" ... 48 = 2" 20 = blue/red 22 = green/blue 26 = yellow/yellow 27 = blue/green 30 = white/red 32 = white/green
20
22
26
27
30
32
Body
Nickelplated brass Chemical nickelStandard plated brass
Lever
Nickelplated brass Chemical nickelplated brass
Ball
Nickelplated polished brass Chemical nickelplated brass
Seat Seals
Rilsan: graphite- Filled impreg- PTFE nated PTFE white
Application Examples
20 22
olive
Hydrocarbons Industrial fluids and high temperature Corrosive liquids or high temperature Industrial fluids and/or harsh environments Gaseous oxygen circuits Water and steam circuits
26*
27 30** 32
A usage chart in this chapter shows which type of valve to use according to the fluid being conveyed.
www..com
6- 9
Industrial Valves
Ball Valves
Legris ()
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1 G1 G2 4 7 7 10 13 20 23 32 32 40 40 0402 04 10 0402 07 10 0402 07 13 0402 10 17 0402 13 21 0402 20 27 0402 23 34 0402 32 42* 0402 32 49* 0402 40 49* 0402 40 48*
E
8 8 12 12 15 16.5 19 21.5 22 22 26
F
19 19 24 27 32 41 55 55 55 70
F1
H1
L1
25 27 28 31 34 39 47 59 62 55 61
M
48 48 48 69 69 108 108 180 180 190 190
kg
0.094 0.166 0.156 0.244 0.292 0.655 1.036 2.467 2.340 2.445 2.614
0401
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1 4 5 7 10 13 18 23 32 0401 04 10 0401 05 10 0401 07 13 0401 10 17 0401 13 21 0401 18 27 0401 23 34 0401 32 42*
E
8 8 12 12 15 16.5 19 21.5
E1
7 7 9 11 12 12 15 18
F
14 19 19 24 27 38 46 60
H1
L1
kg
0.094 0.160 0.150 0.234 0.286 0.652 0.952 2.385
35 29 38 31 38 31 45 43 47 44 63 54 67 57 97 115
14 45 19 51 19 52 24 58 27 66 39 79 48 91 55 113
0400
C
G1/8 G1/4 G3/8 G1/2 G3/4 4 7 10 13 18 0400 04 10 0400 07 13 0400 10 17 0400 13 21 0400 18 27
E
7 9 11 12 12
F
14 19 24 27 38
H
35 38 45 47 63
H1
29 31 43 44 54
J
14 19 24 27 39
L
45 60 70 78 90
L1
25 36 43 45 50
M
48 48 69 69 108
kg
0.094 0.166 0.252 0.324 0.714
0411
2/2 In-Line Ball Valve with Connections for Use with Steel Tube
Nickel-plated brass, NBR
D
6 8 10 12 4 6 7 10 0411 04 06 0411 06 08 0411 07 10 0411 10 12
F
14 17 19 22
F1
19 19 19 24
H
38 38 38 45
H1
31 31 31 43
J
19 19 19 24
L
76 77 78 85
L1
30 30 31 36
M
48 48 48 69
kg
0.073 0.095 0.100 0.110
0414
D
6 8 10 12 4 6 7 10 0414 04 06 0414 06 08 0414 07 10 0414 10 12
F
13 14 19 22
F1
19 19 19 24
H
38 38 38 45
H1
31 31 31 43
J
19 19 19 24
L
72 74 78 86
L1
31 30 31 36
M
48 48 48 69
kg
0.177 0.180 0.210 0.308
6- 10
www..com
Legris ()
C
G1/8 G1/4 G3/8 G1/2 4 7 10 13 0446 04 10 0446 07 13 0446 10 17 0446 13 21
E
8 12 12 15
F
14 19 24 27
F1
22 24 27 27
H
37 45 50 51
H1 H2
14 19 21 23 12 14 21 21
L
44 53 59 67
L1
25 28 31 34
M
48 48 69 69
T
16.5 20.5 20.5 20.5
kg
0.112 0.188 0.294 0.338
Maximum working pressure: 20 bar *For G1/8 version, maximum panel thickness = 3 mm
6402
2/2 In-Line Ball Valve for Screw Fixing, Female BSPP Thread
Nickel-plated brass, NBR
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 4 7 10 13 20 23 6402 04 10 6402 07 13 6402 10 17 6402 13 21 6402 20 27 6402 23 34
E
8 12 12 15 16.5 19
F
14 19 24 27 32 41
F1
14 19 24 27 38 46
G
18 19 20 20 27 27
H1 H2
18 24 30 34 44 53 30 31 45 47 52 56
L
44 53 59 67 80 94
L1
25 28 31 34 39 47
M
48 48 69 69 108 108
N
25 31 31 34 43 51
T
4x70 5x80 5x80 6x100 8x125 8x125
kg
0.132 0.216 0.324 0.404 0.830 1.290
6401
2/2 In-Line Ball Valve for Screw Fixing, Male/Female BSPP Thread
Nickel-plated brass, NBR
C
G1/8 G1/4 G3/8 G1/2 4 7 10 13
E
6401 04 10 8 6401 07 13 12 6401 10 17 12 6401 13 21 15
E1
7 9 11 12
F
14 19 24 27
G
18 19 20 20
H1 H2
18 24 30 34 30 31 45 47
L
45 52 58 67
L1
25 28 31 34
M
48 48 69 69
N
25 31 31 34
T
4x70 5x80 5x80 6x100
kg
0.127 0.212 0.306 0.394
0472
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 4 6 6 9 12 18 23 0472 04 10 0472 06 10 0472 06 13 0472 09 17 0472 12 21 0472 18 27 0472 23 34
E
8 8 12 12 15 16.5 19
F
14 19 19 24 27 38 46
H
35 38 38 45 47 59 63
H1 H2
29 31 31 43 44 51 55 18 20 24 27 33 40 47
J
14 22 22 25 29 39 48
L
34 37 38 46 49 60 72
L1
25 27 28 31 34 39 47
M
48 48 48 69 69 108 108
kg
0.096 0.183 0.191 0.260 0.312 0.704 1.062
0471
C
G1/8 4 6 6 9 12 18 23 0471 04 10 0471 06 10 0471 06 13 0471 09 17 0471 12 21 0471 18 27 0471 23 34
E
8 8 12 12 15 16.5 19
E1
7 7 9 11 12 12 15
F
14 19 19 24 27 38 46
H
35 38 38 45 47 59 63
H1 H2
29 31 31 43 44 51 55 19 22 25 28 32 37 44
J
14 22 22 25 29 39 48
L
34 37 38 46 49 60 72
L1
25 27 28 31 34 39 47
M
48 48 48 69 69 108 108
kg
0.096 0.182 0.187 0.256 0.300 0.682 1.020
E1
www..com
6- 11
Industrial Valves
Ball Valves
Legris ()
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 4 6 9 12 18 23 0482 04 10 0482 06 13 0482 09 17 0482 12 21 0482 18 27 0482 23 34
E
8 12 12 15 16.5 19
F
14 19 24 27 38 46
H
35 38 45 47 59 63
H1 H2
29 31 43 44 51 55 18 24 27 33 40 47
J
14 22 25 29 39 48
L
44 53 59 67 80 94
L1
25 28 31 34 39 47
M
48 48 69 69 108 108
kg
0.103 0.200 0.284 0.346 0.742 1.160
Closed
2 3 2 3 2 3
0483
1 1 3/3 Right-Angle Ported Ball Valve without Closed 1Position, Female BSPP Thread
C
2 G1/8 G1/4 G3/8 2 G1/2 G3/4 3 G1
E
4 6 1 9 12 18 1 23
1 3
F
14 19 1 24 27 38 1 46
3
H
35 38 45 3 47 59 63
H1 H2
29 31 43 44 51 55 18 24 27 33 40 47
J
14 22 25 29 39 48
L
44 53 59 67 80 94
L1
25 28 31 34 39 47
M
48 48 69 69 108 108
kg
0.102 0.196 0.278 0.340 0.716 1.066
3 2
3 1 3 1 1 3 1 2
8 12 12 2 15 16.5 19
2 1
0448
E
0448 04 10 8 0448 06 13 3 12 2 0448 09 17 12 0448 12 21 15
F1
22 24 27 27
2
H
37 45 50 51
H1 H2 H3
14 19 21 23
3 1 1 3
J
14 22 25 29
L
44 53 59 67
L1
25 28 31 34
M
48 48 69 69
T
16.5 20.5 20.5 20.5
kg
0.126 0.230 0.328 0.392
14 19 2 24 1 27
3
18 24 27 33
12 14 21 21
Maximum working pressure: 20 bar *For G1/8 version: maximum panel thickness = 3 mm
2
1 1
1 1
2 2 1
3 3
2 2
Closed 3
1 3
2 2 1
3 3
0452
C
1
3 3 1 2 3 1 1 2
E
8 12
F
2 14
F1 3
H
3 39
H1 H2
10 11 8 11
J
16 23
K
18 24
L
25 28
T
19 20
kg
0.130 0.206
2 G1/8 G1/4
43 6
0452204 10 1 0452 06 13
22 1 19 24
1
40
6- 12
www..com
Legris ()
3/2 In-Line Vented Ball Valve, Female BSPP and Metric Thread
C
G1/4 G3/8 G1/2 G3/4 G1
C1
M5x0.8 M5x0.8 G1/8 G1/4 G1/4 7 10 13 18 23 0489 07 13 0489 10 17 0489 13 21 0489 18 27 0489 23 34
E
12 12 15 16.5 19
F
24 24 27 32 41
F1
24 24 27 38 46
H
46 46 47 63 67
H1 H2
43 43 44 54 57 17 17 24 33 37
L
59 59 67 80 94
L1
31 31 34 39 47
M
69 69 69 108 108
T
2 2 2 2.5 3
kg
0.270 0.243 0.310 0.670 1.050
0449
3/2 Panel-Mountable In-Line Ball Valve, Female BSPP and Metric Thread
Nickel-plated brass, NBR
C1
F1
H
50 50 52
H1 H2 H3
20 20 23 17 17 24 21 21 21
L
59 59 67
L1
31 31 34
M
69 69 69
kg
12 24 27 12 24 27 15 27 27
0469
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 4 7 10 13 18 23 0469 04 10 0469 07 13 0469 10 17 0469 13 21 0469 18 27 0469 23 34
E
8 12 12 15 16.5 19
F
14 24 24 27 32 41
F1
14 24 24 27 38 46
H
35 46 46 47 63 67
H1
29 43 43 44 54 57
L
44 59 59 67 80 94
L1
25 31 31 34 39 47
M
48 70 70 70 108 108
T
1.5 2 2 2 2.5 3
kg
0.092 0.268 0.246 0.294 0.668 1.026
Operation of Vented Ball Valves With vent connected to a tube = collection of purged media With vent connected to a silencer = noiseless discharge to atmosphere
Open
Closed
Open
Closed
You will nd our ranges of ttings, tubing and silencers in Chapters 1, 3 and 9.
www..com
6- 13
Industrial Valves
Ball Valves
Legris ()
E
8 12 12 15 16.5 19
F
19 19 24 27 38 46
H
38 38 45 47 59 63
H1 H2
31 31 43 44 51 55 20 24 27 33 40 47
J
22 22 25 29 39 48
L
37 38 46 49 60 72
L1
27 28 31 34 39 47
M
48 48 69 69 108 108
kg
0.192 0.185 0.261 0.312 0.698 1.066
0461
C
G1/8 G1/4 G3/8 G1/2 G3/4 6 6 9 12 18 0461 06 10 0461 06 13 0461 09 17 0461 12 21 0461 18 27
E1
F
19 19 24 27 38
H
38 38 45 47 59
H1 H2
31 31 43 44 51 20 24 27 33 40
J
22 22 25 29 39
L
37 38 46 49 60
L1
27 28 31 34 39
M
48 48 69 69 108
kg
0.182 0.186 0.257 0.304 0.648
8 7 12 9 12 11 15 12 16.5 12
Operation of Right-Angled Vented Ball Valves With pin-hole vent = purge to atmosphere without silencer
Valve open Valve closed
Valve open
Valve closed
Removable lever: where the lever is obstructed in its movement, it can be refitted the opposite way.
Operation of 3/2 Lockable Valves Drilled below and square in the horizontal plane, these valves provide a connection between: either port 1 and port 2, or port 2 and port 3.
Valve open Valve closed
Feed
Vent
Usage
Usage
Removable lever: where the lever is obstructed in its movement, it can be refitted the opposite way.
6- 14
www..com
Legris ()
E
8 12 12 15 16.5 19
F
19 19 24 27 32 41
F1
19 19 24 27 38 46
H
59 59 60 62 66 70
H1
54 54 55 57 56 59
L
51 59 59 67 80 94
L1
27 28 31 34 39 47
M
69 69 69 69 108 108
kg
0.415 0.396 0.460 0.522 0.800 1.186
Maximum working pressure: 40 bar Handle is not removable. Fixed and mobile plates: zinc-plated steel. 2
0439
C
G1/8 G1/4 G3/8 G1/2 G3/4 G1 4 7 10 13 18 23 0439 04 10 0439 07 13 0439 10 17 0439 13 21 0439 18 27 0439 23 34
E
8 12 12 15 16.5 19
F
19 19 24 27 32 41
F1
19 24 24 27 38 46
H
59 60 60 62 66 70
H1
54 55 55 57 56 59
L
51 59 59 67 80 94
L1
27 31 31 34 39 47
M
69 69 69 69 108 108
T
2 2 2 2 2.5 3
kg
0.410 0.480 0.460 0.514 0.810 1.185
Maximum working pressure: 40 bar Handle is not removable. Fixed and mobile plates: zinc-plated steel. 2
0436
3/2 In-Line Lockable Ball Valve with Threaded Exhaust Port, Female BSPP and Metric Thread
Nickel-plated brass, NBR
C
G3/8 G1/2 G3/4 G1
C1
M5x0.8 G1/8 G1/4 G1/4 10 13 18 23 0436 10 17 0436 13 21 0436 18 27 0436 23 34
E
12 15 16.5 19
F
24 27 32 32
F1
24 27 38 38
H
60 60 69.5 69.5
H1
17 24.5 33 33
L
60 67.5 80 80
L1
32 34.5 39.5 39.5
M
69 69 108 108
kg
0.475 0.500 0.850 1.215
Maximum working pressure: 40 bar Handle is not removable. Fixed and mobile plates: zinc-plated steel.
0437
3/2 In-line Vented 3-Point Lockable Ball Valve, Female BSPP Thread
Nickel-plated brass, NBR
C
G1/4 G3/8 G1/2 G3/4 G1 7 10 13 18 23 0437 07 13 0437 10 17 0437 13 21 0437 18 27 0437 23 34
E
12 12 15 16.5 19
F
24 24 27 32 41
F1
24 24 27 38 46
H
60 60 60 69.5 73
L
59 60 67.5 80 94.5
L1
T
2 2 2 2.5 3
kg
0.476 0.456 0.510 0.820 1.192
Maximum working pressure: 40 bar Handle is not removable. Fixed and mobile plates: zinc-plated steel.
0438
C
G3/8 G1/2 G3/4 G1 9 12 18 23 0438 09 17 0438 12 21 0438 18 27 0438 23 34
E
12 15 16.5 19
F
38 38 38 46
H
76 76 76 80
H1
34 37 40 47
J
39 39 39 48
L
73 78 80 94
L1
35 38 40 47
kg
0.970 0.947 0.905 1.295
Maximum working pressure: 20 bar Fixed plate: zinc-plated steel, mobile plate: steel, grey epoxy-coated. Removable handle: where the handle is obstructed in its movement, it can be refitted opposite the original position.
www..com
6- 15
Industrial Valves
Ball Valves
Legris ()
Using the Universal Series technology, the Parker Legris light series valves offer the advantages of compactness, ease of operation and long-term reliability.
Product Advantages
Easy-to-Use Ease of operation due to the low friction design
The short levers may be repositioned and exchanged Extremely compact Wide range of configurations
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature Compressed air Other fluids: see compatibility chart at the end of this chapter Vacuum to 12 bar
Component Materials
Stem: brass Lever: polymer or zamak
-20C to +80C
Body: shot-blasted brass or shot-blasted nickel-plated brass
G3/4
Wear-compensation seals: NBR
0.50 to 0.70
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum).
Silicone-free
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH)
6- 16
www..com
Legris ()
C
G1/4 G3/8 G1/2 G3/4 4 7 10 13 0492 04 13 0492 07 17 0492 10 21 0492 13 27
E
9 11 12 14
F
17 22 24 30
H
34 38 44 46
L
39.5 45 54 62
L1
17 20 25 28
M
35 43 50 50
kg
0.073 0.128 0.162 0.240
0492..64
C
G1/4 4 0492 04 13 64
Short handle in zamak
E
9
F
17
H
36
L1
M
25
kg
0.090
39.5 17
0491
C
G1/4 G3/8 G1/2 G3/4 4 7 10 13 0491 04 13 0491 07 17 0491 10 21 0491 13 27
E
9 11 12 14
E1
7 8 10 12
F
17 22 24 30
H
34 38 44 46
L
39.5 45 53 59
L1
17 20 24 25
M
35 43 50 50
kg
0.070 0.124 0.160 0.238
E1
0491..64
E1
0490
C
G1/4 G3/8 G1/2 G3/4 4 7 10 13 0490 04 13 0490 07 17 0490 10 21 0490 13 27
E
7 8 10 12
F
17 22 24 30
H
34 38 44 46
L
39 44 53 59
L1
17 20 24 25
M
35 43 50 50
kg
0.070 0.109 0.160 0.233
www..com
6- 17
Industrial Valves
E1
L1
kg
Ball Valves
Legris ()
C
G3/8 7 0494 07 17
Technical polymer handle
E
11
F
22
F1
16
H
38
L
60
L1
20
L2
15
M
43
kg
0.178
0497
C
G1/4 G3/8 G1/2 G3/4 4 7 10 13 0497 04 13 0497 07 17 0497 10 21 0497 13 27
E
9 11 12 14
F
17 22 24 30
H
25 26 29 30
J
7 7 10 10
L
39 45 54 62
L1
17 20 25 28
kg
0.066 0.122 0.148 0.230
0496
C
G1/4 G3/8 G1/2 G3/4 4 7 10 13 0496 04 13 0496 07 17 0496 10 21 0496 13 27
E
7 8 10 12
E1
9 11 12 14
F
17 22 24 30
H
25 26 29 30
J
7 7 10 10
L
39 45 53 59
L1
17 20 24 28
kg
0.065 0.118 0.150 0.222
6- 18
www..com
Legris ()
www..com
6- 19
Industrial Valves
Ball Valves
Legris ()
The combination of long threads, a reinforced sealing system and DVGW certification makes this valve perfect for the transmission of gas and water.
Product Advantages
Reliability & Stem prevented from being ejected in the event of overpressure Sealing Two stem seals to prevent leakage
Date coding to guarantee quality and traceability
Optimum Full flow minimises pressure drop Performance Nickel-plated brass provides improved corrosion resistance
and increased chemical compatibility Can be operated at very low temperatures
Long Excellent fitting compatibility: Threads dimensions compliant with DIN 3357
Robotics Pneumatics Water & Gas Handling Machine Tools Textile Wood Industry
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature
Component Materials
Compressed air, water, gas
Locking nut: galvanised steel Long lever: galvanised steel PVC Butterfly lever: aluminium epoxy
-40C to +170C
Silicone-free
Regulations
Pressure Drop
1000 900 800 700 1000600 900 500
1/4"
1000 900 800 700 600 500 400 300 200
40 40
40
30 30
1/4" 1/4"
Industrial DI: 97/23/EC (PED B+D module EC 1115) Water DVGW: W 570-1 DIN EN 13228 BGA KTW DVGW: W270 Gas DIN EN 33
400200 300
100 90 200 80 70 60 50 40
30
20 20 10
11/2" 2"
"
20
0 -40 0
10
100 30 90 80 70 20 60 50 40 30
10
1 "
1/4
11/2" 2"
11/2" 2"
200 300 400
20
50 60 70 80 90 100
200
300
6- 20
www..com
400
0 -40
50
100
150
170
10 1 2 3 4 5 6 7 8 9 10 20 30 40
50 60 70 80 90 100
10
0 -40
150
170
10 1 2 3 4 5 6 7 8 9 10 20 30 40
DVGW Series
BVG4-L
Legris ()
C
G1/4 G3/8 8 10 15 20 25 32 40 50 BVG4-1/4L BVG4-3/8L BVG4-1/2L BVG4-3/4L BVG4-1L BVG4-1,1/4L BVG4-1,1/2/4L BVG4-2L
E
12 12 17 21 23 23
F
20 20 32 41 50 55
G
25 25 32.5 39 47.5 59 71.5 86
H
38 38 43 50 54
L
50 60
kg
82 0.150 82 0.150
M G F C E L H
G1/2 G3/4 G1 G1 G1 G2
15.5 25
26.5 70
C
G1/4 G3/8
H
E
8 10 15 20 25 BVGT4-1/4L BVGT4-3/8L BVGT4-1/2L BVGT4-3/4L BVGT4-1L 12 12 17 21
F
20 20 32 41
G
25 25 39
H
39 39 47
L
50 60 75 80 90
kg
G1/2 G3/4 G1
15.5 25
32.5 43 47.5 51
Compact lever
www..com
6- 21
Industrial Valves
Ball Valves
Legris ()
This range of valves with fluoropolymer seals, available in compact, standard and lockable series, covers many industrial applications for which the fluids conveyed and working temperatures require this seal material.
Product Advantages
Optimised Full fluid flow Installation Long or butterfly lever
Corrosion resistance A lockable version for operational safety Good value/performance ratio
Wide Numerous compatible fluids Compatibility Can be used for low and medium pressure applications
Surface treatment for corrosion protection
Machine Tool Agricultural Machinery Textile Pneumatics Plumbing Air Conditioning Heating
Applications
Technical Characteristics
Model Standard and Lockable Series Compact Series
Component Materials
Long lever: steel with plastic sleeve Compact Series lever: technical polymer Butterfly lever: treated zamak Locking system: treated steel Locking nut (except Compact Series) and Locking screw (Compact Series): galvanised steel
Compatible Fluids
Compressed air, gas, water, water vapour, oil and all fluids compatible with the component materials
Working Pressure
0 to 30 bar
0 to 35 bar
Working Temperature
-20C to +130C
-10C to +90C
Body: nickel-plated or chromium-plated shot-blasted brass Ball: nickel-plated or hard chromium-plated brass
Silicone-free
Regulations
Industrial DI: 97/23/EC (module PED A - EC diameters greater than 25 mm) DI: Machinery Directive 2006/42/EC DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 89/392/EC
6- 22
www..com
Standard Series
4902
Legris ()
C
G1/4 G3/8 G1/2 G3/4 G1 G1 G1 G2 G2 G3 G4 10 10 15 20 25 32 40 50 65 80 100 4902 10 13 4902 10 17 4902 15 21 4902 20 27 4902 25 34 4902 32 42* 4902 40 49* 4902 50 48* 4902 65 47* 4902 80 46* 4902 01 45*
PN
30 30 30 30 30 25 25 25 30 30 30
M
98 98 98 122 122 153 153 162 255 255 255
kg
0.154 0.138 0.202 0.322 0.468 0.794 1.082 1.787 4.500 5.840 9.040
11 20 43 51.5 11.4 20 43 51.5 13.5 25 47 55 12.5 31 58 57.5 15 38 60 69.5 17 48 77 81.5 18 54 83 95 22 66 95 113 22 85 132 136 25 99 140 157 29 125 154 191
*Models with CE marking Model from 2": double stem seal in FPM Working temperature: -40C to +170C
BVGT4-C
C
G1/4 8 10 15 20 25 BVGT4-1/4C BVGT4-3/8C BVGT4-1/2C BVGT4-3/4C BVGT4-1C G3/8 G1/2
E
9 9 11 12 14
F
20 20 25 31 38
G
25 25 39
H
40 40 49
L
39 39 50 54 67
kg
M G F C E L
32.5 44 47.5 53
G3/4 G1
Compact lever
4991
C
G1/8 G1/4 G3/8 G1/2 6 8 8 10 4991 00 10 4991 00 13 4991 00 17 4991 00 21
E
10 11 11 13
E1
10 11 11 13
F
21 21 21 25
H
30 30 30 32
L
41.5 41.5 41.5 49
L1
10 11 10.5 12.5
M
24 24 24 24
kg
0.091 0.087 0.087 0.134
4992
C
G1/8 G1/4 G3/8 G1/2 6 8 8 10 4992 00 10 4992 00 13 4992 00 17 4992 00 21
E
10 11 11 13
F
21 21 21 25
H
30 30 30 32
L
41.5 41.5 41.5 49
L1
10 11 10.5 12.5
M
24 24 24 24
kg
0.110 0.106 0.094 0.142
www..com
6- 23
Industrial Valves
Ball Valves
Standard Series
BVG4-LOCK
Legris ()
C
G1/4 8 10 15 20 25 BVG4-1/4LOCK BVG4-3/8LOCK BVG4-1/2LOCK BVG4-3/4LOCK BVG4-1LOCK G3/8 G1/2
E
12 12 17 21
F
20 20 31 40
L1
22.5 22.5 29.5 32
kg
15.5 25
F C E L E L1
G3/4 G1
BVG4P-LOCK
C
G1/4 8 10 15 20 25 BVG4P-1/4LOCK BVG4P-3/8LOCK BVG4P-1/2LOCK BVG4P-3/4LOCK BVG4P-1LOCK G3/8 G1/2
E
12 12 17 21
F
20 20 31 40
L1
22.5 22.5 29.5 32
kg
15.5 25
F C E E L1
G3/4 G1
M5 L
6- 24
www..com
Legris ()
The chart below shows the compatibility between valves and fluids along with their pressure and temperature characteristics. Certain models have a maximum working pressure which differs from that given in this table. In this case, the pressure is shown in the heading for the model number in question. N.B.: Above 32 mm or 1" diameters, divide the maximum pressure by 2. If the fluid you are using is not shown in this chart, please contact us.
Chemical Description
Temperature C Min. -20 -20 -20 -20 -20 -20 -20 -20 +5 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -25 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 Max. +60 +60 +60 +60 +60 Boiling +90 Boiling +200 +40 +60 +40 +60 +60 Boiling +60 +90 +60 +60 +60 Boiling Boiling +60 +60 +90 +180 +60 +60 +40 +90 +60 +100 Boiling +90 +90 +60 +60
"Aromatic" hydrocarbons Acetone and other ketones Acetophenone Acetylene - Acetone Acetylene (gas) Alcohol (100%) Aluminium (liquid suspension, thick) Amyl alcohol Animal fats, greases Antifreeze or glycol (diluted) Argon (gas) Ar Barium - Hydroxide Benzaldehyde Benzene Benzyl alcohol Borax (pastes or solutions) Brake fluids (automobile) Bromochlorotrifluorethane Butadiene (hydrocarbon) Butane Butanol Butyl alcohol Butylene (hydrocarbon) Carbon dioxide gas CO 2 Castor oil Compressed air Creosotes Cresols Crude oil Cutting oil Decalin (hydrocarbon, solvent) Detergents (solutions) Diacetone alcohol Diesel oils Di-Esters Di-Isobutylene Di-Pentane
Industrial Valves Ball Valves
The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions.
www..com
6- 25
Legris ()
Temperature C Min. -20 -20 Max. +60 +60 +90 +200 +200 +60 +60 +60 +60 +120 Boiling +40 +40 +40 +40 +40 +90 +90 +60 +50 +60 +90 +60 +60 +40 +60 +60 Boiling +60 +80 +40 +60 Boiling Boiling +40 +90 +40 +90 +90 +60 +90 +90
DVGW Series 20
Customised Series 22 26 27 30 32
Di-Pentene (solvents, varnish) Di-Phenyl-Oxide (thin detergents) Distilled water Edible fats Edible oils Erytrene (see Butadiene) Ethane (gas) CH 2 CH 3 Ethane (hydrocarbon gas) Ethyl alcohol Ethylene glycol (antifreeze) - see Glycols Fatty alcohols Fuel oils Fuels-Diesels Gaseous oxygen (ambient air) Glycerine Glycol (for antifreeze, lubricants) Graphite in suspension in water, oils and greases Greases (from petroleum) Helium (gas) Heptanal Hexane (solvent) Hydraulic oils (petroleum-based) Hydrogen (gas) Inks Insecticides Iso-Butane (aliphatic hydrocarbon) Iso-Octane Isopropyl alcohol Krypton (gas) Kr Light water Lighting gas Methane (gas) CH 4 Methanol Methyl alcohol Methylated spirit Mineral oils Natural gas Natural waxes (vegetable, beeswax, carnauba, Chinese, lignite) Neatsfoot oil Neon (Gas) Ne Nitrogen (gas) N Oil (petroleum-based) and water emulsions
The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions.
6- 26
www..com
Legris ()
Temperature C Min.
-20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20
Max.
+100 +40 +30 +60 +90 +60 +60 Boiling +40 +160 +60 +60 Boiling +60 +60 Boiling +60 +90 +30 +80 +150 +100 +40 +40 +40 +150 +60 +65 +50 +60 +60 +90 +90 +150 +60 +60
DVGW Series 20
Customised Series 22 26 27 30 32
Oils "synthetic" Ordinary petrol Oxygenated water Paints and relevant solvents Paraffin oil Paraffins Pentane (liquid hydrocarbon) Pentanols 1 and 2 Petrol "super" Petroleum mineral oils Phenol (aqueous or alcoholic) Propane Propanols 1 and 2 Propanone 2 Propene or Propylene Propyl alcohol Propylene or Propene Rapeseed oil Saponifying liquids Seawater Seawater (high temperature) Soaps Soaps (liquid or paste) Sodium carbonate (with water) Starch (gels or pastes) Steam Toluene (terpenic hydrocarbon) Trichlorethylene Turpentine Varnish and paints Vaseline Vaseline oil Water (carbonated) Water (high temperature) Xenon (gas) Xe Xylene
The above recommendations are given in good faith. However, since each application is different, it is advisable to undertake tests in actual working conditions.
www..com
6- 27
Industrial Valves
Ball Valves
Legris ()
Stainless steel series ball valves can withstand corrosive fluids and environments.
With full flow, high pressure and temperature capabilities, these valves are suitable for many applications.
Product Advantages
Reliability Full flow
Excellent chemical compatibility High resistance to pressure/temperature Light series version: 100% leak-tested in production, date coding to guarantee quality and traceability
One-piece: cannot be disassembled 3-piece: easily disassembled for maintenance and cleaning Light Series: for maximum compactness Fixing plate: 4812 and 4832 Through-bulkhead fitting Pneumatic or electronic actuation (ISO 5211 standard)
Applications
Technical Characteristics
Compatible Fluids Type 4810, 4812 and 4832 All fluids Type 0465 All fluids
Component Materials
Lever: nickel-plated brass (0465) or 304L stainless steel (4832-4812-4810) Stem: 316L stainless steel (4832-4812-4810) or 303 stainless steel (0465)
0 to 65 bar
Vacuum to 20 bar
-20C to +150C
-20C to +120C
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum).
Regulations
Version 0465
Working Pressure (bar)
70 60 50 40 30 20 10 -20 0 20
PN64
PN40
Examples at +100C: PN 64: 48 bar PN 40: 30 bar PN 42: 17 bar For temperatures between +150C and +200C, please contact us.
100 150
-20
20 15
Industrial DI: 97/23/EC (module PED A - EC diameters greater than 25 mm) DI: Machinery Directive 2006/42/EC DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 89/392/EC
10
PN25
50
Temperature C
Temperature C
6- 28
www..com
Legris ()
2/2 In-Line 3-Piece Ball Valve with Fixing Plate, Female BSPP Thread
Stainless steel 316L, PTFE
C
G1/4 G3/8 G1/2 G3/4 G1 G1 G1 G2 10 10 15 20 25 32 40 50 4832 10 13 4832 10 17 4832 15 21 4832 20 27 4832 25 34 4832 32 42* 4832 40 49* 4832 50 48*
E
18 18 20.5 22.5 27 30 31 36
F
22 22 27 32 41 50 55 70
T
5.5 5.5 6 5.5 6 5.5 6.5 6.5
kg
0.272 0.400 0.442 0.568 1.035 1.530 2.146 3.140
36 57 110.5 36 57 110.5 36 65 131.5 42 76 131.5 42 92 174.5 42 106.5 174.5 50 116 250.5 50 136 250.5
4812
2/2 In-Line Ball Valve with Fixing Plate, Female BSPP Thread
Stainless steel 316L, PTFE
C
G1/4 G3/8 G1/2 G3/4 G1 G1 G1 G2 10 10 15 20 25 32 40 50 4812 10 13 4812 10 17 4812 15 21 4812 20 27 4812 25 34 4812 32 42* 4812 40 49* 4812 50 48*
E
10 11 15 16 19 21 21 26
G
36 36 36 42 42 42 50 70
kg
0.263 0.254 0.336 0.574 1.000 1.337 2.214 3.262
50 55 110 5.5 50 55 110 5.5 53 66 110 5.5 67 79 130 5.5 79 93 175 5.5 83 100 175 5.5 100 110 250 5.5 107 131 250 8.5
4810
C
G1/4 G3/8 G1/2 G3/4 G1 8 10 15 20 25 4810 08 13 4810 10 17 4810 15 21 4810 20 27 4810 25 34
E
10 10 13 14 17
G
30 30 32.5 40 49
H
44.5 44.5 47 54.5 58.5
L
53.5 53.5 60 70 79
M
110.5 110.5 110.5 131.5 131.5
kg
0.205 0.194 0.245 0.420 0.648
0465
C
G1/4 G3/8 G1/2
Silicone-free
E
4 7 10 0465 04 13 0465 07 17 0465 10 21 13 13 16
F
19 24 27
F1
24 27 30
H
36 39 40
L
50 55 62
kg
0.226 0.278 0.322
www..com
6- 29
Industrial Valves
Ball Valves
Legris ()
These valves are suitable for applications with pressures up to 300bar. High performance materials and quality manufacturing allow for a wide range of operating pressures and temperatures.
Product Advantages
High Pressure Good sealing at low and high pressure & Safety Robust design with secure, non-removable inlet and outlet ports
Forged brass providing excellent long-term strength under severe conditions of use 100% leak-tested in production Date coding to guarantee quality and traceability
Automotive Process Foundry Forming Machine Tools Textile Spectacle-Making Industry Turbines Deep-Sea Diving
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature
Component Materials
Compressed air
Lever: zamak Stem: stainless steel Body: dichromate-treated zincplated brass Stem seal: PTFE Wear-compensation seals: NBR Threaded inserts: treated steel Reinforcement ring: treated steel
-15C to +80C
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99% vacuum).
Silicone-free
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH)
Installation Options
Bulkhead Mounting Through bulkhead with screws Surface Mounting With brackets and screws
6- 30
www..com
Legris ()
E
12 12 15
H1 H2 H3
50 54 56 13 23 23 15 19 21
J
30 36 40
K
30 39 42
L
58 72 79
L1
25 36 36
N
15 20 20
N1
20 30 30
kg
0.402 0.722 0.870
www..com
6- 31
Industrial Valves
Ball Valves
Legris ()
With their push-in connections, these polymer lightweight ball valves allow for a significant reduction in installation time while offering full flow capability and compact dimensions.
Product Advantages
Optimum Full flow Solution Marked with the pneumatic symbol for identification of its function
Lightweight and compact Extremely compact, easy-to-operate lever Lever with screwdriver slot to facilitate operation Designed for polymer tubing with no tube preparation Can be mounted on a wall or adjacent using staples
Proven LF 3000 push-in connection, excellent static and dynamic sealing Technology High-strength polyamide
Excellent long-term performance Automatic seal wear compensation for long-term reliability 100% leak-tested in production Date coding to guarantee quality and traceability
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature Compressed air
Component Materials
Vacuum to 10 bar
-20C to +80C
G1/8
G1/4
G3/8
G1/2
0.8
1.2
3.5
Ball: nickel-plated polished brass
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm Hg (99 % vacuum).
Silicone-free
Operation
Vented Valve, Open Position
3/2 model with vent
Downstream vent
6- 32
www..com
Mini Series
7910
Legris ()
D
4 6 8 10 12 7910 04 00 7910 06 00 7910 08 00 7910 10 00 7910 12 00
G
15 15 15 20 20
H
37 37 37 43 43
H1
7.5 7.5 7.5 11 11
K
22 22 22 30 30
L
51 52 52 66 66
N
16 16 16 22 22
kg
0.039 0.034 0.025 0.060 0.040
7911
D
6 8 10 12
C
G1/8 G1/4 G3/8 G1/2 7911 06 10 7911 08 13 7911 10 17 7911 12 21
F
13 16 20 24
G
14 17.5 22 26
H
37 37 43 43
K
22 22 30 30
L
62 61 74 75
L1
37 35 41 42
N
16 16 22 22
kg
0.045 0.040 0.075 0.075
7913
D
4 6 8 10 12
2
G
7913 04 00 7913 06 00 7913 08 00 7913 10 00 7913 12 00 15 15 15 20 20
H
37 37 37 43 43
H1
7.5 7.5 7.5 11 11
K
22 22 22 30 30
L
51 52 52 66 66
N
16 16 16 22 22
kg
0.040 0.035 0.025 0.060 0.045
7914
D
6 8 10 12
C
G1/8 G1/4 G3/8 G1/2 7914 06 10 7914 08 13 7914 10 17 7914 12 21
F
13 16 20 24
G
14 17.5 22 26
H
37 37 43 43
K
22 22 30 30
L
62 61 74 75
L1
37 35 41 42
N
16 16 22 22
kg
0.045 0.040 0.058 0.075
7000
Joining Clips
Technical polymer
D
4 6 8 10 12 7000 00 05 7000 00 05 7000 00 05 7000 00 06 7000 00 06
kg
0.004 0.004 0.004 0.009 0.009
www..com
6- 33
Industrial Valves
Ball Valves
Legris ()
This range of valves offers an innovative solution in the treatment of water and the handling of beverages while protecting health. These compact and reliable valves offer perfect sealing and excellent cleanliness.
Product Advantages
Innovative Technology & Increased Reliability
Full flow to limit turbulence Full-flow self-cleaning ball maintains the cleanliness of the circuit Tube retention with gripping ring prevents pumping effect Push-in connection and disconnection Sealing technology using patented EPDM seal
High Inert technical polymer providing the best mechanical strength, Performance thermal and chemical resistance
Carstick connection providing resistance to water hammer Other configurations available on request
Beverage Dispensers Inert Gases Cooling Food Process Water Purication Water Coolers
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature
Component Materials
Water, drinks, beverages
Body: polypropylene Lever: technical polymer
0 to 10 bar at 20C
-15C to +100C
Tightening Torques
Threads daN.m
3/8" NPTF 3
1/2" NPTF 3
Silicone-free
Regulations
FDA: 21 CFR NSF: 51 and lead < 0.25% WQA: Water Quality Association
6- 34
www..com
Legris ()
Inch
D
1/4 3/8 4020 56 00WP2 4020 60 00WP2
H
25 36
H1
13 13
L
65 68
L1
kg
4021
Inch
H
4021 56 14WP2 4021 60 18WP2 36 36
D
1/4 3/8
C
NPT1/4 NPT3/8
H1
13 13
L
61 64
L1
kg
4023
Inch
H H1
13 13
D
1/4 3/8
C
NPT1/4 NPT3/8 4023 56 14WP2 4023 60 18WP2
L
58 64
L1
kg
36 36
C L1
4022
Inch
52 52 29 29 44 47 31 0.016 33.5 0.027
1/4 3/8
NPT1/4 NPT3/8
3130
Technical polymer
H
3130 56 01 3130 60 01 3130 56 02 3130 60 02 3130 56 03 3130 60 03 3130 56 04 3130 60 04 3130 56 05 3130 60 05 3130 56 10 3130 60 10 8 10.8
K
3.2 4.2
kg
0.001 0.001
www..com
6- 35
Industrial Valves
H1
L1
kg
Ball Valves
Legris ()
6- 36
www..com
Legris ()
0502
Page 6-39
0501
Page 6-39
0510
Page 6-39
0532
Page 6-39
0531
Page 6-39
Drain Valve
0562
0563
0627
0630
0591
Page 6-41
4602
Page 6-43
www..com
6- 37
Industrial Valves
Needle Valves
Legris ()
Parker Legris compact needle valves can be installed in any system and are designed for applications requiring accurate leak-free fluid control and excellent service life.
Product Advantages
Robust and Accurate flow control Easy-to-Use Forged brass for improved long-term mechanical strength
Robust stem for good operational reliability Corrosion resistance
Wide Range Two materials (nickel-plated brass and stainless steel) suitable
for many applications Numerous valve and safety accessory configurations
Applications
Technical Characteristics
Brass Stainless Steel
Component Materials
Compatible Fluids
Many fluids
Lever: zamak, nickel-plated brass or 316L stainless steel (0591) Stem nut: nickel-plated brass or 316L stainless steel (0591)
Working Pressure
0 to 120 bar
0 to 400 bar
Working Temperature
-20C to +180C
Top packing washer: brass or 316L stainless steel (0591) Needle: nickel-plated brass or 316L stainless steel (0591)
Silicone-free
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH)
6- 38
www..com
Legris ()
E
9 11 12 12
H J H max
56 56 67 82 50 50 60 70 17 17 -
L/2
23 23 26 33
kg
0.133 0.118 0.171 0.426
0501
C
G1/8 G1/4 G3/8 4 4 6 0501 04 10 0501 04 13 0501 06 17
E
9 11 12
E1
H J H max
50 50 60 17 17 -
L
44 46 48
kg
0.118 0.115 0.158
7 56 9.5 56 9.5 67
0510
D
6 8 10
C
M10x1 M12x1 M16x1.5 4 8 5 0510 04 06 0510 05 08 0510 05 10
F
13 14 19
kg
0.083 0.083 0.111
The needle is sealed by an O-ring. Maximum operating pressure: 4: 100 bar, 5: 60 bar Working temperature: -15C to +70C Tightening torques: please refer to the Compression Fittings chapter of this catalogue.
0532
C
G1/8 G1/4 4 4 6 0532 04 10 0532 04 13 0532 06 13
E
9 11 11
H H min max H1
46 46 55 52 52 63 19 21 26
J
17 17 22
L
19 21 26
kg
0.093 0.087 0.169
0531
C
G1/8 G1/4 G3/8 G1/2 4 4 6 6 10 0531 04 10 0531 04 13 0531 06 13 0531 06 17 0531 10 21
E
7 9.5 9.5 9.5 13
H H H1 E1 min max
9 11 11 12 16 46 46 55 55 62 52 52 63 63 72 19 21 25 25 34
J
17 17 22 22 26
L
19 21 26 27 33
kg
0.082 0.090 0.155 0.153 0.330
www..com
6- 39
Industrial Valves
Legris ()
E
8 8 10
F
16 16 19
H H min max
kg
0563
C
NPT1/4 5 0563 05 14
F
14
H H min max
kg
0627
C
G1/4 0627 00 13
Pressure: 10 bar This isolating valve is used to connect a pressure gauge to a circuit. Resetting the lever isolates and vents the gauge. A locking pin can be used to enable the gauge to be fitted permanently.
K
20
L
40
kg
0.097
19 43.5
0630
C
G1/4 0630 06 13
E
9
kg
0.050
17 42.5
This valve is delivered without calibration, but can be adjusted by inserting metal washers into the hexagon (F).
6- 40
www..com
Legris ()
C
G1/8 G1/4 G3/8 G1/2 3 4 5 6 0591 03 10 0591 04 13 0591 05 17 0591 06 21
F
22 22 22 22
H H min max H1
90 99 90 99 90 104 90 104 25 25 30 30
L
45 50 56 62
L1
48 48 48 48
kg
0.345 0.356 0.430 0.483
C H1
www..com
6- 41
Industrial Valves
Butterfly Valves
Legris ()
In these robust valves, the internal component used to shut off the flow is a segment of a sphere. This allows frequent operation with very low torque, no fluid retention areas and therefore excellent mechanical performance.
Product Advantages
Compact & Excellent with abrasive fluids (including solid particles) Abrasion- Fluid flow direction marked for greater safety (uni-directional) Resistant Smooth operation
Can be easily adapted for use with auxiliary actuators More compact than a ball valve with equivalent nominal diameter Simple and efficient design for a long service life
Painting & Printing Machine Tools Pneumatics Powder Conveyance Plumbing Rubber Industry Petrochemical
Applications
Technical Characteristics
Compatible Fluids Working Pressure Working Temperature Compressed air, industrial gases, water, cutting oils, hydraulic oils, fuel oil, fuel, etc.
Component Materials
0 to 16 bar
Stem: brass
-20C to +80C
O-ring: NBR
Silicone-free
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH)
6- 42
www..com
Butterfly Valves
4602
Legris ()
C
G1/4 G3/8 G1/2 G3/4 G1 6 7 10 13 18 4602 06 13 4602 07 17 4602 10 21 4602 13 27 4602 18 34
E
9 11 12 14 15
F
17 22 24 30 41
H
35 35 37 40 46
L
34 39 42 49 55
M
54 54 54 54 54
kg
0.098 0.136 0.140 0.208 0.412
www..com
6- 43
Industrial Valves
Legris ()
6- 44
www..com
Legris ()
4202..20
FKM Seal 2/2 Page 6-48
4202..30
EPDM Seal 2/2 Page 6-48
4212..20
FKM Seal 2/2 Page 6-48
4212..30
EPDM Seal 2/2 Page 6-48
In-Line Double-Acting
4222..20
FKM Seal 2/2 Page 6-48
4222..30
EPDM Seal 2/2 Page 6-49
Accessories
4298
4298
4299
www..com
6- 45
Axial Valves
Axial Valves
Legris ()
The Parker Legris axial valve is the only valve to incorporate both the valve and actuation function. With pneumatic or electro-pneumatic control, it avoids many of the restrictions associated with traditional actuators.
Product Advantages
Optimisation Very compact: up to 50% smaller than valves with separate & Safety actuators
Simple to install: ready-to-use Common sub-base for solenoid control Automation of the open/close function Operation independent of the upstream and downstream pressure in the circuit
Comprehensive Two seal materials for a wider chemical and temperature range Offer Pneumatic, electro-pneumatic or dual actuation control
Three versions: normally closed, normally open and doubleacting
Flow Control Plastic Injection Moulding Rubber Industry Pneumatics Textile Printing Packaging Robotics
Applications
Technical Characteristics
Compatible Fluids Working Pressure Pilot Pressure Working Temperature Depending on type of seal FKM: water, air, oils, greases, etc. EPDM: hot water, air, steam, etc. 10 bar max. NC and NO: 4.2 to 8 bar Double-acting: 3 to 8 bar -20C to +135C (suffix 20 FKM) -20C to +120C (suffix 30 EPDM)
Sub-base: anodised aluminium
Component Materials
Solenoid valve: technical polymer
G1 0.50 to 0.70
G1 0.40 to 0.60
G1 0.80 to 1.20
G2 0.80 to 1.20
Body: nickel-plated shot-blasted brass Lip seal: EPDM or FKM Piston: chemical nickel-plated brass
daN.m
Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 740 mm Hg (97% vacuum).
Silicone-free
Regulations
DI: 97/23/EC (module PED A - diameters greater than 25 mm) DI: 2006/42/EC (Machinery Directive) DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 94/9/EC (ATEX) - for pneumatic operation versions
1/2
1"
20
2"
Kv
=6 8
0,2
=4 8 Kv
,8 ,9
40
60
Flow (m/h)
6- 46
www..com
Axial Valves
Operation
Legris ()
Depending on operational requirement, air is passed into the actuation chamber to open or close the valve.
Normally Closed Axial Valve (NC) Normally Open Axial Valve (NO) Double-Acting Axial Valve (DE)
Pilot signal to close Return spring Return spring Pilot signal to open
Installation Options
The Parker Legris axial valve offers 3 different control methods dependant on the requirements of the installation:
Pneumatic Control
Example: Double-acting axial valve 4222 local compressed air control for repetitive on/off cycles remote control where access to the machine is difficult for explosive or explosion prevention areas
P
Control valve
Pneumatic operation
Electro-Pneumatic Control
Example: Normally closed axial valve 4202 + sub-base and Mini-solenoid valve 4298 for automated industrial systems requiring remote control Namur seating plane solenoid valve
Mini-solenoid valve
Electro-pneumatic operation
Button
Mini-solenoid valve
Pneumatic/electropneumatic operation
www..com
6- 47
Axial Valves
Axial Valves
4202..20
Legris ()
Normally Closed Axial Valve with FKM Seal, Female BSPP Thread
Nickel-plated brass, FKM
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4202 10 17 20 4202 15 21 20 4202 20 27 20 4202 25 34 20 4202 32 42 20* 4202 40 49 20* 4202 50 48 20*
F
22 27 33 41 50 60 75
H1
31 35 38 41.5 48 54 60.5
L
98 112 135 143 165 180 207
kg
0.815 1.092 1.624 2.033 3.266 4.195 6.465
4202..30
Normally Closed Axial Valve with EPDM Seal, Female BSPP Thread
Nickel-plated brass, EPDM
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4202 10 17 30 4202 15 21 30 4202 20 27 30 4202 25 34 30 4202 32 42 30* 4202 40 49 30* 4202 50 48 30*
F
22 27 33 41 50 60 75
H1
L
98 112 135 143 165 180 207
kg
0.828 1.098 1.624 1.998 3.315 4.195 6.360
4212..20
Normally Open Axial Valve with FKM Seal, Female BSPP Thread
Nickel-plated brass, FKM
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4212 10 17 20 4212 15 21 20 4212 20 27 20 4212 25 34 20 4212 32 42 20* 4212 40 49 20* 4212 50 48 20*
F
22 27 33 41 50 60 75
H1
31 35 38 41.5 48 54 60.5
L
98 112 135 143 165 180 207
kg
0.829 1.100 1.637 2.037 0.030 4.188 6.555
4212..30
Normally Open Axial Valve with EPDM seal, Female BSPP Thread
Nickel-plated brass, EPDM
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4212 10 17 30 4212 15 21 30 4212 20 27 30 4212 25 34 30 4212 32 42 30* 4212 40 49 30* 4212 50 48 30*
F
22 27 33 41 50 60 75
H1
31 35 38 41.5 48 54 60.5
L
98 112 135 143 165 180 207
kg
0.827 1.152 1.575 2.055 3.301 4.775 6.360
4222..20
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4222 10 17 20 4222 15 21 20 4222 20 27 20 4222 25 34 20 4222 32 42 20* 4222 40 49 20* 4222 50 48 20*
F
22 27 33 41 50 60 75
H1
31 35 38 41.5 48 54 60.5
L
98 112 135 143 165 180 207
kg
0.802 1.063 1.572 1.942 3.058 3.995 6.275
6- 48
www..com
Axial Valves
4222..30
Legris ()
Double Acting Axial Valve with EPDM seal, Female BSPP Thread
Nickel-plated brass, EPDM
C
G3/8 G1/2 G3/4 G1 G1 G1 G2 4222 10 17 30 4222 15 21 30 4222 20 27 30 4222 25 34 30 4222 32 42 30* 4222 40 49 30* 4222 50 48 30*
F
22 27 33 41 50 60 75
H1
31 35 38 41.5 48 54 60.5
L
98 112 135 143 165 180 207
kg
0.832 1.046 1.662 1.938 3.301 4.260 6.520
4298
C
M5x0.8 4298 00 01
The sub-base is fitted directly to the axial valve and allows the mounting of a 15x15 solenoid valve. Supplied with 2 fixing bolts, silencer and seals.
kg
0.095
4298
Voltage
24V 24V 110V 220V CC* CA** CA** CA** 4298 01 01 4298 01 02 4298 02 01 4298 02 02
kg
0.052 0.058 0.051 0.054
4299
Pneumatic Button/Electro-Pneumatic
Nickel-plated brass
Contact
Standard* With key* Standard** With key** 4299 01 01 4299 01 02 4299 02 01 4299 02 02
kg
0.085 0.110 0.102 0.124
Bulkhead fixing hole diameter: 22 mm *1 pneumatic contact **1 electro-pneumatic contact Available upon request only
www..com
6- 49
Axial Valves
Legris ()
www.parkerlegris.com
www..com