Documente Academic
Documente Profesional
Documente Cultură
DESIGN OF DAVIT
In accordance with pressure vessel design manual by Dennis Moss Notation : P Axial Load A Cross-sectional area Z Section modulus r Radius of gyration tp Wall thickness of pipe davit a Outside radius of pipe L1 Length of davit L2 Height of pipe from support fa Axial Stress fb Bending stress Fa Allowable axial stress Fb Allowable bending stress K Stress coefficients R Radius of bent of davit M1 Bending moment in davit at top support M2 Maximum bending moment in curved davit I Moment of Inertia Fy Minimum specified yield stress fv Vertical force fh Horizontal force W1 Weight of davit
kg cm cm cm mm mm mm mm kg/cm
= = = = = = = = =
lbs in in in in in in in lb/in
cm4 psi kg kg kg
3.8943
= 739 = 739 = 35
Size of davit pipe used - OD 88.9mm * 7.62mm thk Weight of blind flange - 293.00 kg Weight of nozzle N2 - 24.00 kg Weight of nozzle N5 - 5.8 kg Miscellaneous weight - 10 kg Hence Total weight of the blind flange is 332.8 kg ~
335
kg
Material Specification of davit pipe - SA-106 Gr B Yield strength of pipe = Fy = 35000 psi Allowable bending stress Fb = 0.6*Fy = 21000 psi Allowable axial stress Fa = 13250 psi (From sec VIII Div 1 Appendix-L, Ed 2007 allowable compressive stress for columns) Axial Stress fa = P = A 17.22 kg/cm2 = 244.78 lb/in
Page 98 Bending moment in davit pipe at top support M1 M1 = fv*L1 + 0.5*W1*L1 + fh*L2 = 27641.42 in-lb
Maximum bending moment incured at davit M2 M2 = M1 (L2 - R) L2 = 5168.72 in-lb Coefficients = tp* R= a = 6 = 5+6* 9 10+12
1.176
0.45
K= 1-
0.6617
12423.11 psi
Combined stress fa + fb = <1 Fa Fb Hence combined stress at M1 0.61 <1 Hence combined stress at M2 0.11 <1 Thus we can conclude that the provided davit pipe is adequate as the combined stress is Lesser than 1.