Documente Academic
Documente Profesional
Documente Cultură
Riser
System
Stack
System
SD5211-96
SD11600-96
Riser Systems
Cameron riser system components, spider/gimbal, telescoping joint, RST
ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are
designed to meet the stringent requirements for drilling in deep water.
Control Systems
Cameron offers a complete hydraulic control system as well as a multiplex
control system for subsea drilling applications. Cameron supplies all the
components required for choke control systems as well as all of the components used to control the BOP stack and associated equipment. For land
applications, Camerons pump accumulator unit and remote control panels
are designed to customer specifications. All of our components offer fieldproven reliability and high quality, dependable components.
For more information on complete Cameron drilling systems, contact your
local Cameron representative or visit our web site (http//camerondiv.com).
Cameron
BOP Replacement Parts Catalog
Cameron provides all of the OEM products and services necessary to maintain the full range of Cameron drilling products. This catalog contains
information on our worldwide network of aftermarket facilities as well as detailed information on the replacement parts necessary for the following
Cameron products:
U BOP
TL BOP
DL Annular BOP
UII BOP
UL BOP
T BOP
D Annular BOP
The Cameron BOP Replacement Parts Catalog, along with the 1996-1997 Cameron General Catalog, is also available on CD ROM. The electronic
version of the catalog provides easy-to-use, interactive information on all Cameron products. The CD ROM is compatible with MacIntosh and
Windows 3.1 and Windows 95 systems. To obtain a copy the CD ROM, contact your Cameron representative or follow the How to Order
instructions below.
(713) 939-2735
By Mail:
Contents
Page
Page
U II BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
U II BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . 29
U II Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
U II BOP Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
U II BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
U II BOP Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
U II BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CAMRAM 350 Packers and Top Seals for U II BOPs . . . . . . . . . . . 32
T BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
T BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . . . 34
T BOP Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
T BOP Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
T BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
13-5/8 10,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 36
13-5/8 10,000 psi WP Bonnet Subassembly . . . . . . . . . . . . . . 37
18-3/4 15,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 38
18-3/4 15,000 psi WP Bonnet Subassembly. . . . . . . . . . . . . . 39
T BOP Pipe Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
T BOP CAMRAM 350 Packers and Top Seals for T BOP . . . . . . . . 40
T BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
T BOP Variable Bore Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TL BOP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TL BOP Dimensions, Weights and Components . . . . . . . . 43
UL BOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
UL BOP Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
UM BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
DL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
D and DL Annular BOP Dimensions, Weights and Components . . 47
D and DL Annular BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . 48
7-1/16 3000 - 11 15,000 psi WP . . . . . . . . . . . . . . . . . . . . . . 48
13-5/8 - 21-1/4 2000 psi WP . . . . . . . . . . . . . . . . . . . . . . . . . 49
D and DL Annular BOP Replacement Part Kits . . . . . . . . . . . . . . . . 50
S/QRC and G-2 Snubbing/Workover BOPs . . . . . . . . . . . . . . 51
S/QRC and G-2 BOP Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Clamp Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Manufacturing and Aftermarket Locations
(Addresses, Telephone and Fax Numbers)
Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sales Offices
(Addresses, Telephone and Fax Numbers)
Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
In any area of the world where Cameron drilling products are used, Cameron
aftermarket and repair facilities are ready to respond with the most
comprehensive network of aftermarket products and services available in the
industry. Each of our facilities is strategically located to meet the exact needs of
the customers in the area. Yet all of the facilities benefit from our expertise and
worldwide communications network which links all facilities through an
electronic communication system and ensures instantaneous access to
information. Cameron aftermarket services include: total vendor management
(TVM), spare parts inventory, repair refurbishment (RGR), BOP exchange
program, field service
RGR
Camerons focus on aftermarket services includes a complete RGR program.
Cameron will repair equipment to customer specifications - fit for purpose, with
a reasonable price and quick delivery. Camerons RGR goal is to receive the
equipment and do whatever is necessary to get it back in the field as quickly as
possible. In addition, Cameron has embarked on a detailed engineering study
to take as much time and money out of our RGR processes as possible while
still maintaining the quality customers expect from Cameron drilling products.
Camerons RGR program also includes the option of retrofitting BOPs with
some of the features of more current BOP designs such as bonnet seal carriers,
large bore shear ram bonnets and tandem boosters.
Working
Pressure
7-1/16
5000
7-1/16
10,000
11
5000
11
10,000
11
15,000
13-5/8
5000
13-5/8
10,000
16-3/4
5000
16-3/4
10,000
18-3/4
15,000
18-3/4
10,000
20-3/4
3000
BOPs
Large Bore
Shear
Bonnets
Rams
Tandem
Boosters
(Small Bore)
Bonnet
Seal
Carrier
Veracruz, Mexico
Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Welding,
Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint,
Customer Property Storage.
Zrate, Argentina
Dedicated manufacturing facility with aftermarket support. Services include:
Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat,
Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
Aberdeen, Scotland
Dedicated aftermarket facility with manufacturing support. Services include:
Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
Stavanger, Norway
Dedicated aftermarket facility with
manufacturing support. Services include:Assembly, Marine Stack and Tree Assembly,
Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining,
Inspection, Blast and Paint, Customer Property Storage.
SD-10861-96
SD-10810-96
SD-24101-96
SD-10813-96
CAMRAM Products
CAMRAM packers and top seals are designed specifically for Cameron ram
BOPs. These new elastomer products from Cameron Elastomer Technology last
longer and provide increased margins of safety in severe drilling environments
than do look-alike replacement parts. Thats under all conditions high
temperatures, diesel mud and heavy stripping. CAMRAM long-life packers
mean fewer problems, less downtime and better overall performance.
CAMRAM Characteristics
Higher Temperature Capability
300%
270
250
Improvement
200
200
200%
170
110
100%
100
100
100
100
100
0%
70F
300F
Tensile Strength
Elongation
Tear
Strength
Abrasion
Resistance
Retained Properties
200%
190
130
100%
0%
100
Tensile
Strength
100
Elongation
100
Rubber
Hardness
Mechanical Properties
70 Hours in 300F Diesel Fluid
Condition
250F
Mineral-based Hydraulic Oil
10,000 psi
50 Closure and Pressure Cycles
at 250F without Leakage
Fatigue Test Results
Result
Cycles Completed
CAMRAM
50
Packer Condition
Brand A*
1
Brand B*
50
Brand C*
9
Passed Pressure
Failed,
Passed
Failed, Would
Test - OK for
Would Not
Pressure Test,
Not Hold
Continued Use Hold Pressure Failure Imminent Pressure
5%
90%
25%
CAMRAM
40%
Brand A
Brand B
Brand C
SD-10872-96
Condition
Test Temperature
Test Fluid
Bore Pressure
Drill Pipe Size
Stripping Rate
Parameter
120F
Water
1500 psi
5"
20 feet per minute
CAMRAM
47,928
Brand A*
11,980
Brand B*
15,638
Brand C*
2,366
Brand D*
14,168
Brand E*
1,687
0
10
20
30
40
50
CAMRAM 350 packers and top seals are made with CAMLAST high
performance elastomer available exclusively from Cameron Elastomer
Technology. In addition, CAMRAM 350 packers have a patented lipped top and
bottom plate design for increased service life. In addition, anti-extrusion wings
have been added to the end of the packer plates to reduce elastomer extrusion at
elevated temperatures. Benefits of CAMRAM 350 include:
The CAMRAM 350 logo molded into all CAMLAST packers and top seals
ensures a genuine quality part from Cameron Elastomer Technology.
CAMRAM 350 Packers and Top Seals Shut-In Well after 43 Days of Exposure to H2S
In actual field test conditions, the CAMRAM 350 16-3/4 x 5-1/2 5000 psi
pipe ram packers and top seals pictured at right, were successfully used to
shut-in a gas well after exposure to natural gas containing 35% H2S at
temperatures of 190 for 43 days. The components show negligible damage
after exposure to the severe conditions experienced in controlling the blowout.
CAMRAM 350 packers and top seals are made with CAMLAST elastomer
and are intended for use to 350F in high H2S concentrations and with water
and/or diesel based drilling mud. CAMLAST elastomer is a proprietary
material made only by Cameron Elastomer Technology in Katy, Texas.
CAMRAM 350 packers and top seals are available on a special order basis
only.
For applicable part numbers and availability, please contact your local
Cameron representative or the Cameron Elastomer warehouse at
(281) 391-4644.
Location
Flowline Temperature
Number of Days Used
Concentration of H2S
Upper Plate
Upper Plate
Lower Plate
Wearing Surface
SD-7395
Lower Plate
Rubber in Compression
Cameron offers the most comprehensive line of rams in the industry for its BOPs
including pipe rams, shearing blind rams, and variable bore rams. A selection of
dual string rams are also available to fit specific preventers.
Cameron also offers high quality elastomer products for its rams through
TL BOP
T BOP
UL BOP
U BOP
U II BOP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
10
TL BOP
T BOP
UL BOP
U BOP
U II BOP
Surface Applications
Yes
Yes
Yes
Yes
No
Subsea Applications
Yes
Yes
Yes
Yes
Yes
11
13-5/8
16-3/4
18-3/4
3000 psi WP
5000 psi WP
5000 psi WP
10,000 psi WP
10,000 psi WP
15,000 psi WP
15,000 psi WP
3000 psi WP
5000 psi WP
10,000 psi WP
15,000 psi WP
3000 psi WP
5000 psi WP
10,000 psi WP
10,000 psi WP
15,000 psi WP
3000 psi WP
5000 psi WP
10,000 psi WP
5000 psi WP
10,000 psi WP
10,000 psi WP
10,000 psi WP
15,000 psi WP
15,000 psi WP
15,000 psi WP
20-3/4
3000 psi WP
21-1/4
2000 psi WP
5000 psi WP
10,000 psi WP
26-3/4
3000 psi WP
Yes
Yes
No
No
No
No
Yes
No
No
No
Not Required
Yes
No
Yes
Standard
TX Gasket
Available
Available
Available
ST Lock/Wedgelocks
ST Lock
Wedgelocks
Wedgelocks
Wedgelocks
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Body Styles
Single
Yes
Yes
Yes
Yes
Yes
Double
Yes
Yes
Yes
Yes
Yes
Modular
Yes
Yes
No
No
No
API Flange
Yes
Yes
Yes
Yes
Yes
Clamp Hub
Yes
Yes
Yes
Yes
Yes
Studded
Yes
Yes
Yes
Yes
Yes
11
U BOP
Bonnet seal carrier is available to eliminate the need for high makeup
torque on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure is
applied to open the BOP.
For subsea applications, a pressure balance chamber is used with the
wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 21 through 26
for rams available to fit the U BOP.
The Cameron U BOP is the most widely used ram-type BOP for land, platform
and subsea applications worldwide and offers the widest range of sizes of any
Cameron ram-type BOP.
Like all other Cameron preventers, the rams in the U BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure.
Other features of the U BOP include:
Hydraulic stud tensioning available on larger sizes to ensure that stud
loading is consistently accurate and even.
SD-3772
Wedgelock Assembly
SD-5308
U Blowout Preventer
12
SD-84-05
1.3
3.5
5.8
5.8
10.6
10.6
10.6
12.5
23.1
8.7
8.7
30.0
26.9
10.8
18
27
32
32
45
38
38
45
54
46
46
54
51
58
6.9:1
7.3:1
9.8:1
7.0:1
10.6:1
6.8:1
6.8:1
6.8:1
7.4:1
7.0:1
7.0:1
7.2:1
7.2:1
7.0:1
2.2:1
2.5:1
2.2:1
2.3:1
3.6:1
2.3:1
2.3:1
2.3:1
3.7:1
1.3:1
1.3:1
4.0:1
4.0:1
1.0:1
7-1/16" All WP
11" Except 15,000 psi
11" 15,000 psi
13-5/8" Except 15,000 psi
13-5/8" 15,000 psi Model B
16-3/4" 3000 psi Model B
16-3/4" 5000 psi Model B
16-3.4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi
13
7.9
9.0
10.9
16.2
19.0
19.0
19.1
__
27
32
32
45
38
38
45
__
12.0:1
15.2:1
10.8:1
16.2:1
10.4:1
10.4:1
10.4:1
__
4.8:1
3.7:1
4.5:1
6.0:1
4.4:1
4.4:1
4.4:1
__
14.3
14.3
__
__
__
14.9
14.9
__
__
__
46
46
__
__
__
10.8:1
10.8:1
__
__
__
1.7:1
1.7:1
__
__
__
Ram
Lube*
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
Cameron
Box Wrench*
713114-08
7957-06
713114-10
713114-10
713114-13
7959-08
713114-10
***
713114-13
***
***
713114-08
713114-10
***
***
713114-13
Allen Wrench*
Packing Screw
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
* One required.
**Two required for single preventer, four for double preventer.
*** Commercially available sockets are recommended.
14
Handwheel**
5457
5457
5457
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
Universal
Joint**
6018-01
6018-01
6018-01
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
Extension
Wrench*
5652
5652
5652
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
U BOP Dimensions
SD-84-201
SD-84-201
SD-9928
Pressure
Rating
(psi)
Vertical
Bore
(in.)
A-1
A-2
A-3
A-4
B-1
3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
10,000
3000
2000
5000
10,000
3000
7-1/16
7-1/16
7-1/16
7-1/16
11
11
11
11
13-5/8
13-5/8
13-5/8
13-5/8
16-3/4
16-3/4
16-3/4
18-3/4
20-3/4
21-1/4
21-1/4
21-1/4
26-3/4
74.000"
74.000"
74.000"
74.000"
96.250"
96.250"
96.250"
124.000"
112.125"
112.125"
114.125"
139.000"
127.250"
129.250"
139.000"
156.375"
143.688"
143.688"
164.250"
163.375"
169.625"
109.500"
109.500"
109.500"
109.500"
146.875"
146.875
146.875
175.312"
171.500"
171.500"
172.750"
214.375"
204.562"
202.125
218.375"
242.125"
226.812"
226.812"
247.250"
250.375"
275.375"
__
__
__
__
__
__
__
__
__
__
110.125"
110.125"
124.500"
122.688"
122.688"
124.688"
152.250"
147.250"
149.250"
155.500"
166.500"
163.938"
163.938"
180.938"
181.125"
__
150.188"
150.188"
167.125"
166.062"
166.062"
167.312"
205.500"
199.375"
202.250"
212.000"
226.625"
223.875"
223.875"
239.250"
239.500"
__
24.062"
27.500"
30.562"
31.812"
29.062"
34.312"
35.688"
44.812"
31.312"
33.812"
41.688"
53.688"
40.062"
43.062"
49.688"
56.000"
40.562"
37.188"
50.938"
66.000"
48.312"
B-2
__
25.188"
27.188"
__
__
29.312"
32.188"
33.875"
__
31.938"
32.812"
42.000"
31.750"
34.938"
41.938"
43.234"
33.312"
33.312"
46.125"
53.000"
__
E-1
20.250"
20.250"
20.625"
20.625"
25.125"
25.125"
25.750"
32.000"
29.250"
29.250"
30.250"
39.500"
35.750"
35.750"
39.500"
42.500"
39.516"
39.516"
42.500"
47.250"
46.250"
8.750"
10.406"
11.062"
11.688"
9.812"
12.438"
13.125"
16.688"
10.312"
11.562"
15.125"
21.375"
13.312"
14.812"
19.375"
20.500"
14.312"
12.625"
17.969"
24.531"
17.438"
E-2
F-1
__
7.844"
9.625"
12.031"
12.656"
10.531"
13.156"
13.844"
17.781"
11.531"
12.781"
17.094"
22.844"
15.406"
16.906"
20.219"
22.000"
16.281"
14.594"
18.719"
26.250"
19.906"
9.250"
9.375"
__
__
9.938"
11.375"
11.219"
__
10.625"
10.688"
15.500"
9.156"
10.750"
15.500"
13.875"
10.688"
10.688"
17.188"
18.031"
__
F-2
Approx.
Weight
(lbs)
__
8.469"
10.344"
__
__
10.656"
12.094"
12.312"
__
11.844"
12.656"
17.000"
11.250"
12.844"
16.344"
15.344"
12.656"
12.656"
14.688"
19.750"
__
5.50"
5.50"
5.50"
5.50"
6.75"
6.75"
6.75"
9.25"
7.50"
7.50"
7.50"
8.00"
9.25"
9.25"
9.25"
12.00"
8.00"
8.00"
13.50"
13.50"
8.00"
2600
2800
3550
3800
5300
5600
6400
10,300
7200
7700
10,300
23,700
13,700
13,750
23,300
28,900
13,650
13,250
30,000
34,650
24,000
Press.
Rating
(psi)
Vert.
Bore
(in.)
A-1
A-2
A-3
A-4
B-1
B-2
B***
E-1
E-2
F-1
F-2
H-1
H-2
Approx.
Weight
(lbs)
7-1/16"**
3000
7-1/16
74.000"
109.500"
__
__
41.000" __
__
7.844"
5.50" 25.688"
__
11.438"
5000
7-1/16"**
5000
7-1/16
74.000"
109.500"
__
__
9.250"
9.625"
8.469"
5.50" 27.094"
25.938" 11.188"
5200
7-1/16"
10,000
7-1/16
74.000"
109.500"
__
__
7-1/16
74.000"
109.500"
__
__
10.344"
__
__
__
9.375" 12.031"
__
12.656"
__
10.531"
__
6.75
27.438" 12.562"
__
12.562"
__
13.438"
6400
15,000
5.50" 29.125"
7-1/16"
9.938" 13.156"
10.656"
6.75" 32.625"
11"**
3000
11
96.250"
146.875"
11"**
5000
11
96.250"
146.875"
110.125"
150.188"
18.562" 20.250"
8.750"
__
5.50" 29.750"
30.000"
6750
9900
11"**
10,000
11
96.250"
146.875"
110.125"
150.188"
12.094"
6.75" 33.312"
11" Model 79
15,000
11
124.000"
175.312"
124.500"
167.125"
12.312"
__
9.25" 41.625"
13-5/8"
3000
13-5/8 112.125"
171.500"
122.688"
166.062"
13-5/8"
5000
13-5/8 112.125"
171.500"
122.688"
166.062"
11.844"
7.50" 33.625"
13-5/8"
10,000
13-5/8 114.125"
172.250"
124.688"
167.312"
12.656"
7.50" 40.062"
7.50" 32.375"
13-5/8 139.000"
214.375"
152.250"
205.500"
81.750" 70.125"
17.000"
8.00" 49.438"
16-3/4" Mod B
3000
16-3/4 127.250"
204.562"
147.250"
199.375"
9.156" 15.406"
11.250"
9.25" 39.125"
16-3/4" Mod B
5000
16-3/4 129.250"
202.125"
149.250"
202.250"
12.844"
9.25" 40.625"
16-3/4"**
10,000
16-3/4 139.000"
218.375"
155.500"
212.000"
16.344"
9.25" 47.438"
18-3/4"
10,000
18-3/4 156.375"
242.125"
166.500"
226.625"
20-3/4"
3000
20-3/4 143.688"
226.812"
163.938"
223.875"
12.656"
8.00" 39.875"
21-1/4"
2000
21-1/4 143.688"
226.812"
163.938"
223.875"
12.656"
8.00" 38.188"
21-1/4"
21-1/4"**
26-3/4"
5000
21-1/4 164.250"
247.250"
180.938"
239.250"
10,000
21-1/4 163.375"
250.375"
3000
26-3/4 169.625"
275.375"
181.125"
__
239.500"
__
15
37
34
12
36
38
16
15
24
18
22
35
17
19
40
10
SD-5287
42
26
14
13
28
27
33
29
11
32
31
30
25
23
21
41
20
Description
Description
Qty
Sgl
Qty
Dbl
7-1/16"
3000
psi
Model II
__
Body
1
1
Intermediate Flange
2
4
30266-03
Intermediate Flange/Shear
41499-03**
Bonnet
2
4
30278-04
Ram Assembly
2
4
644216-()
Piston, Operating
2
4
236501-15-11-08
Piston, Operating/Shear
49116-01**
Cylinder, Operating
2
4
30274-02
Cylinder, Operating/Shear
41365-02
Housing, Locking Screw
2
4
30308-01
Locking Screw
2
4
30326
Locking Screw/Shear
49258-01
Piston, Ram Change/Open
2
4
30324
Piston, Ram Change/Close
2
4
30325
Cylinder, Ram Change
4
8
30273-02
Bolt, Bonnet
8
16 30312-06
Bolt, Bonnet/Shear
41366-06
Stud, Locking Screw Housing
16
32 219065-10-04-41
Stud, Locking Screw Housing/Shear
38732-57-00-54
Nut, Locking Screw Housing
16
32 2709000-10-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-36
Ring, Plastic Energizing
2
4
18586-12
Seal Ring, Connecting Rod
2
4
212741-37-00-01
__
Ring Back-Up
4
8
Seal, Bonnet
2
4
644197-01-00-01
Pin, Ram Guide
4
8
30313-02
O-Ring, Operating Cylinder
4
8
702640-44-61
O-Ring, Operating Piston Rod to Int Flg
2
4
18492-92
Lip Seal, Operating Piston
2
4
710541
Seal Ring, Tail Rod
2
4
11741-32
O-Ring, Wiping
2
4
702640-33-11
O-Ring, Ram Change Piston to Body
4
8
702640-32-41
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702640-32-91
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-33-81
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-34-21
O-Ring, Ram Change Piston
4
8
702640-33-21
O-Ring, Bonnet Bolt Retainer
8
16 702640-22-31
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-22-00-50
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-04
Ring, Retainer
2
4
18572-83
Wear Ring, Operating Piston
2
4
49223-03
687117-01
Spacer, Shear****
7-1/16"
5000
psi
Model II
__
7-1/16"
10,000
psi
Model II
__
30266-03
41499-03**
30278-03
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-02
41366-02
219065-10-04-41
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
__
30266-01
41499-01**
30278-02
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-07
41366-07
219065-10-04-41
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
21792-21
644197-01-00-01 644197-01-00-01
30313-02
30313-02
702640-44-61
702640-44-61
18492-92
18492-92
710541
710541
11741-32
11741-32
702640-33-11
702640-33-11
702640-32-41
702640-32-41
702640-32-91
702640-32-91
702640-33-81
702640-33-81
702640-34-21
702640-34-21
702640-33-21
702640-33-21
702640-22-51
702640-22-91
702585-22-00-50 702585-22-00-50
17454-08
17454-08
17454-09
17454-09
11849
11849
7650-08
7650-08
689523-04
689523-04
18572-83
18572-83
49223-03
49223-03
687117-01
687117-01
7-1/16"
15,000
psi
Model II
11"
5000
psi
Model II
11"
10,000
psi
Model II
__
__
__
__
30266-01
41499-01**
30278-01
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-01
41366-22
5913-26-10
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
21792-21
644197-01-00-01
30313-02
702640-44-61
18492-92
710541
11741-32
702640-33-11
702640-32-41
702640-32-91
702640-33-81
702640-34-21
702640-33-21
702640-23-21
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-04
18572-83
49223-03
687117-01
30267-03
41457-03**
30268-01
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-04
41366-04
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-22-71
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02
30267-03
41457-03**
30268-02
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-03
41366-03
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-22-91
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02
30267-03
41457-03**
30268-03
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-05
41366-05
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-23-41
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02
*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
16
11"
3000
psi
Model II
15
24
37
34
12
36
38
19
18
22
35
17
16
40
10
SD-5287
42
26
14
13
28
33
27
29
11
32
31
30
23
25
21
41
20
Description
Description
Qty
Sgl
Qty
Dbl
11"
15,000
psi
Model 79
__
Body
1
1
Intermediate Flange
2
4
49391-01
Intermediate Flange/Shear
*
Bonnet
2
4
31241
Ram Assembly
2
4
644222-()
Piston, Operating
2
4
698481
Piston, Operating/Shear
*
Cylinder, Operating
2
4
30274-01
__
Cylinder, Operating/Shear
Housing, Locking Screw
2
4
30308-03
Locking Screw
2
4
30846
__
Locking Screw/Shear
Piston, Ram Change/Open
2
4
31239
Piston, Ram Change/Close
2
4
31238
Cylinder, Ram Change
4
8
30273-01
Bolt, Bonnet
8
16 30312-12
__
Bolt, Bonnet/Shear
Stud, Locking Screw Housing
16
32 38732-61-00-75
__
Stud, Locking Screw Housing/Shear
Nut, Locking Screw Housing
16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-38
Ring, Plastic Energizing
2
4
18586-13
Seal Ring, Connecting Rod
2
4
011741-38-00-01
Ring Back-Up
4+
8+ 21792-22
Seal, Bonnet
2
4
49272-03
Pin, Ram Guide
4
8
30313-01
O-Ring, Operating Cylinder
4
8
702640-45-51
O-Ring, Operating Piston Rod to Int Flg
2
4
18492-91
Lip Seal, Operating Piston
2
4
710538
Seal Ring, Tail Rod
2
4
212741-34-00-01
O-Ring, Wiping
2
4
702640-33-71
O-Ring, Ram Change Piston to Body
4
8
702640-32-81
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702640-33-31
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-34-61
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-42-51
O-Ring, Ram Change Piston
4
8
702640-33-81
O-Ring, Bonnet Bolt Retainer
8
16 702640-23-91
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-25-00-54
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-05
Ring, Retainer
2
4
18572-84
Wear Ring, Operating Piston
2
4
49223-01
687117-03
Spacer, Shear****
13-5/8"
3000
psi
Model II
13-5/8"
5000
psi
Model II
13-5/8"
10,000
psi
Model II
__
__
__
30270-01
686242**
30284-02
644225-()
679816
687542**
30274-01
41365-01**
30308-03
30307
30846
30310
30309
30273-01
30312-09
41366-09
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
30270-01
686242**
30284-01
644225-()
679816
687542**
30274-01
41365-01**
30308-03
30307
30846
30310
30309
30273-01
30312-01
41366-01
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
31216
686767**
31241
644225-()
678512
690791**
30274-01
41365-01**
30308-03
30307
30846
31239
31238
30273-01
30312-12
41366-12
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
21792-26
644197-03-00-11 644197-03-00-11 644197-03-00-11
30313-01
30313-01
30313-01
702640-45-51
702640-45-51
702640-45-51
18492-90
18492-90
18492-90
710538
710538
710538
212741-34-00-01 212741-34-00-01 212741-34-00-01
702640-33-71
702640-33-71
702640-33-71
702640-32-81
702640-32-81
702640-32-81
702640-33-31
702640-33-31
702640-33-31
702640-34-61
702640-34-61
702640-34-61
702640-42-51
702640-42-51
702640-42-51
702640-33-81
702640-33-81
702640-33-81
702640-23-11
702640-23-21
702640-23-91
702585-25-00-44 702585-25-00-44 702585-25-00-54
17454-08
17454-08
17454-08
17454-09
17454-09
17454-09
11849
11849
11849
7650-08
7650-08
7650-08
689523-01
689523-01
689523-01
18572-85
18572-85
18572-85
49223-01
49223-01
49223-01
687117-03
687117-03
687117-03
*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19.
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
+11" 15,000 psi requires 8 for single, 16 for double.
17
13-5/8"
15,000
psi
Model B
16-3/4"
3000
psi
Model B
__
__
38944
16-3/4"
5000
psi
Model B
__
698899
*
691849
644228-()
698996
*
30274-06
__
30274-06
__
30308-06
695234
__
30308-06
38901
__
38847
038848-01
30273-06
30312-25
__
38946
38947
30273-07
30312-17
__
5918-34-10
__
5918-78-10
__
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
21792-26
644196-01
30313-08
702645-46-11
18492-90
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-24-51
702585-31-00-54
17454-08
17454-09
11849
7650-08
689523-01
18572-85
49223-04
687117-05
2709000-14-01
M517988
5940-09
005930-05-10
12469-52
18586-14
212741-44
__
38844
41408
38843-01
644231-()
689562
694085**
30274-06
41365-06**
30308-06
38901
695234
38847
038848-01
30273-06
30312-16
41366-16
5918-78-10
5918-34-10
2709000-14-01
M517988
5940-09
005930-05-10
12469-52
18586-14
212741-44
__
046613-04
30313-06
702645-46-11
2708811-01
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-23-21
702585-31-00-44
17454-08
17454-09
11849
7650-08
689523-02
33186-85
49223-04
__
046613-04
30313-06
702645-46-11
2708811-01
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-23-71
702585-31-00-54
17454-08
17454-09
11849
7650-08
689523-02
33186-85
49223-04
687117-05
__
38843-02
644231-()
614374-01
__
37
34
12
36
38
16
15
24
19
18
22
35
17
40
10
SD-5287
42
26
14
13
28
27
33
29
11
32
31
30
23
25
21
20
41
Description
Description
Qty
Sgl
Qty
Dbl
16-3/4"
10,000
psi
Model II
__
Body
1
1
Intermediate Flange
2
4
691848
Intermediate Flange/Shear
*
Bonnet
2
4
691849
Ram Assembly
2
4
644231-()
Piston, Operating
2
4
692828
Piston, Operating/Shear
*
Cylinder, Operating
2
4
41365-06
__
Cylinder, Operating/Shear
Housing, Locking Screw
2
4
30308-06
Locking Screw
2
4
695234
__
Locking Screw/Shear
Piston, Ram Change/Open
2
4
692756
Piston, Ram Change/Close
2
4
692759
Cylinder, Ram Change
4
8
30273-13
Bolt, Bonnet
8
16 30312-24
__
Bolt, Bonnet/Shear
Stud, Locking Screw Housing
16
32 5918-34-10
__
Stud, Locking Screw Housing/Shear
Nut, Locking Screw Housing
16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-52
Ring, Plastic Energizing
2
4
18586-14
Seal Ring, Connecting Rod
2
4
212741-44
Ring Back-Up
4
8
21792-34
Seal, Bonnet
2
4
046613-04
Pin, Ram Guide
4
8
30313-06
O-Ring, Operating Cylinder
4
8
702645-46-11
O-Ring, Operating Piston Rod to Int Flg
2
4
2708811-01
Lip Seal, Operating Piston
2
4
710542
Seal Ring, Tail Rod
2
4
212741-45
O-Ring, Wiping
2
4
702640-34-21
O-Ring, Ram Change Piston to Body
4
8
702640-33-21
O-Ring, Ram Change Piston Rod to Int Flg 4
8
31423-21-13-85
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-35-41
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-43-41
O-Ring, Ram Change Piston
4
8
702640-34-41
O-Ring, Bonnet Bolt Retainer
8
16 702640-24-51
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-31-00-72
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-02
Ring, Retainer
2
4
33186-35
Wear Ring, Operating Piston
2
4
49223-04
687117-05
Spacer, Shear****
18-3/4"
10,000
psi
Model II
__
20-3/4"
3000
psi
Model II
__
41458
__
41459
644234-()
41460
__
30274-13
__
30308-09
41085
__
40961
40960
30273-09
30312-23
__
5919-38-10
__
2709000-18-01
M517988
5940-09
005930-05-10
12469-72
18586-19
212741-60
21793-40
644197-05-00-01
30313-07
2708812-01
41602-04-13-85
710543
212741-36-00-01
702640-34-51
702640-34-01
2010180-02
702640-43-51
702640-43-81
30101-83-13-85
702640-24-71
702585-36-00-76
17454-08
17454-09
11849
7650-08
689523-03
33186-01-04
49223-07
__
30911-01
41496-01**
30835-01
44256-()
690058
693405**
30274-04
41365-04**
30308-04
30846
34233
30848
30849
30273-04
30312-10
41366-10
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
21-1/4"
2000
psi
Model II
__
30911-01
41496-01**
30835-02
44256-()
690058
693405**
30274-04
41365-04**
30308-04
30846
34233
30848
30849
30273-04
30312-11
41366-11
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
__
__
49955-01
49963-01
644240-()
49954-01
__
30274-11
__
30308-08
41085
__
41064
41065
30273-11
30312-26
__
5919-38-10
__
2709000-18-01
M517988
5940-09
005930-05-10
12469-70
18586-18
11741-58
21793-39
046613-16
046613-16
46613-09
30313-04
30313-04
30313-07
702640-45-51
702640-45-51
702640-47-01
18492-90
18492-90
30101-88-13-85
710538
710538
710544
212741-34-00-01 212741-34-00-01 212741-36-00-01
702640-33-71
702640-33-71
702640-34-51
702640-33-61
702640-33-61
702640-34-31
702640-34-11
702640-34-11
31423-52-13-85
702640-43-71
702640-43-71
702640-44-01
702640-43-91
702640-43-91
702640-44-21
702640-42-51
702640-42-51
702640-43-11
702640-22-91
702640-22-71
702640-24-71
702585-28-00-50 702585-28-00-50 702585-36-00-93
17454-08
17454-08
17454-08
17454-09
17454-09
17454-09
11849
11849
11849
7650-08
7650-08
7650-08
689523-01
689523-01
2353-46
18572-85
18572-85
33186-92
49223-10
49223-10
49223-11
__
687117-03
687117-03
*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
Requires 2 for single and 4 for double.
18
21-1/4"
5000
psi
Model II
21-1/4"
10,000
psi
Model II
__
615369-01
615418-01
41357
644240-()
41356
41374**
30274-11
41365-11**
30308-08
41085
__
41064
41065
30273-11
30312-21
41366-21
5919-38-10
__
2709000-18-01
M517988
5940-09
005930-05-10
12469-70
18586-18
11741-58
21793-39
46613-09
30313-07
702640-47-01
30101-88-13-85
710544
212741-36-00-01
702640-34-51
702640-34-31
31423-52-13-85
702640-44-01
702640-44-21
702640-43-11
702640-24-81
702585-36-00-93
17454-08
17454-09
11849
7650-08
2353-46
33186-92
49223-08
__
26-3/4"
3000
psi
Model II
__
__
38327
38326
44260-()
614376-01
__
30274-05
__
30308-05
34233
__
38174
38324
30273-05
30312-13
__
5918-76-10
__
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
46613-08
30313-05
702640-45-51
18492-90
710538
212741-34-00-01
702640-33-71
702640-34-41
702640-34-91
702640-43-91
702640-44-11
702645-42-91
702640-23-91
702585-31-00-70
17454-08
17454-09
11849
7650-08
689523-01
18572-85
49223-10
__
SD-10816
12A**
2A
24A
26A
5A
42A
3A
11"
3000
psi
Model II
Description
(2 Required per Cavity)
11"
5000
psi
Model II
11"
10,000
psi
Model II
11"
15,000
psi
Model 79
13-5/8"
3000
psi
Model 11
13-5/8"
5000
psi
Model II
13-5/8"
10,000
psi
Model II
13-5/8"
15,000
psi
Model B
16-3/4"
5000
psi
Model B
16-3/4"
10,000
psi
Model II
20-3/4"
3000
psi
Model II
21-1/4"
2000
psi
Model II
615195-01
615194-01 614596-01
615419-01
615196-01
615191-01
614498-01
615540-01
615530-01
615537-01
615526-01
615525-01
615195-02
615194-02 614596-02
615419-02
615196-02
615191-01
614498-02
615540-02
615530-02
615537-02
615526-02
615525-02
2A
Intermediate Flange/Shear
615188-01
615188-01 615188-01
615459-01
615192-01
615192-01
614766-01
615538-01
615528-01
615535-01
615523-01
615523-01
3A
Bonnet/Shear
615189-03
615189-02 615189-01
615640-01
615143-02
615143-01
614772-01
615448-01
615527-01
615534-01
615522-01
615522-02
5A
Operating Piston/Shear
645249-01
645249-01 645249-01
615457-01
615209-01
615209-01
614760-01
615539-01
615529-01
615536-01
615524-01
615524-01
24A
70264045-51
70264045-81
70264045-81
70264045-81
70264045-81
70264546-51
70264546-51
70264546-51
70264045-81
70264045-81
26A
710586
42A
70264045-51
70264045-51
710586
710586
710542
710542
710542
710542
710588
710588
710588
710542
710542
49223-15
49223-15
49223-04
49223-04
49223-04
49223-04
49223-17
49223-17
49223-17
49223-14
49223-14
*Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration.
**See pages 16, 17 and 18 for bonnet bolt part numbers.
7
10
17
23
13
11
15
16
SD-10803-99
5
6
1
12
14
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
27
7-1/16"
11"
11" 15,000 psi
Description
3000, 5000
3000, 5000
13-5/8" 3000, 5000
Description
10,000 and 15,000 psi*
5,000 and 10,000 psi
and 10,000 psi
Qty Part No.
Qty Part No.
Qty Part No.
Cylinder
1 644959-01
2 645113-01
2 645113-03
Cylinder Head
1 644960-01
2 645171-01
2 645171-03
Piston
1 644961-01
2 2032370-02
2 645172-03
Tailrod
1 644962-01
2 645173-01
2 645173-03
Adapter Plate
1 644963-01
2 645115-01
2 645115-03
Screw, SDC HD Cap
8 18541-34
16 18542-13
16 18542-14
O-Ring
1 702640-24-91
2 702640-36-11
2 702645-37-11
Seal Ring
1 710541
2 712352
2 710538
Wear Ring, Oper. Piston 1 49223-03
2 49223-21
2 49223-01
Filter, Muffler
1 710621
2 710621
2 710417
Seal, Lip
1 11741-32
2 212741-33-00-01
2 212741-34-00-01
Seal Ring
1 710620
2 712351
2 710419
Wear Ring, Cylinder
1 644443-02
2 644443-03
2 645215-01
Seal Ring
1 705955
2 712445
2 710418
O-Ring
1 702640-33-11
2 702640-33-51
2 702640-33-71
Alignment Ring
1 645116-02
2 645116-01
2 645116-03
__
Pipe Plug
1
2 201018
2 005930-05-10
__
Connector, Tubing
1 19624-01
2
4 204887-10-06-57
Cross
1 6347-08
1 675029-52
1 675029-23
__
Nipple, Pipe Reg.
2
1 685902-07-00-30
1 685902-07-00-30
Hose Assembly
2 711010
2 2708021
2 711374
__
Connector, Tubing
1 204888-08-05-56
2 204887-10-05-56
__
__
Stud, Double End
16 2010189-03
__
Connector, Tubing
1 501133-71-22
2 204887-10-06-56
__
__
Adapter, Pipe
2 675029-01
-
*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.
19
Hang-Off Weights
Hang-off weights are estimated capacities with hardened top corners of the
hang-off rams. This enables the rams to dig into the tool joint and provide
superior hang-off capacity while still meeting NACE requirements.
For variable bore rams (VBRs) and FLEXPACKER rams, hang-off weights up
to 600,000 lbs on hang-off rams with a maximum pipe diameter of 5" are
allowable.
Pipe Size
3-1/2"
4-1/2"
5"
6-5/8"
Pipe Rams
425,000 lbs
550,000 lbs
600,000 lbs
600,000 lbs
sponding pipe at a closing pressure equal to or less than 2800 psi. For further
information on shearing requirements for different pipe sizes and grades, contact your Cameron representative.
Ram
Type
SBR
SBR
DS
SBR
SBR
DS
SBR
SBR
SBR
SBR
SBR
SBR
Pressure
Rating (psi)
All
10,000 and Lower
10,000 and Lower
15,000 and Higher
10,000 and Lower
10,000 and Lower
15,000 and Higher
All
All
3000 and Lower
3000 and Lower
5000 and Higher
Pipe
OD (In.)
3-1/2
5
5
5
5
5
5
5
5
5
5
5
Pipe
Lb/Ft
13.3
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
Note: See page 19 for a complete list of part numbers for the large bore shear bonnets and tandem boosters.
20
Pipe
Grade
S
E
E
G
G
G
S
S
S
G
G
S
Shearing
Configuration
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Standard Bonnets
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Standard Bonnets
Top Seal
SD-10825
Packer
Ram
7-1/16" U BOP
3000, 5000, 10,000, and 15,000 psi WP
Top Seal 644214-01-00-01
Assembly
Blind
Ram
Packer
11" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644217-01-00-01
Assembly
Ram
Packer
11" U BOP
15,000 psi WP
Top Seal 2010453-01
Assembly
Ram
13-5/8" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644223-01-00-01
Packer
Assembly
Ram
Packer
1.050"
1.315"
44233-25
44118-07
19243-08
1.660"
44233-02
44118-02
19243-06
1.900"
44118-03
2.062"
44118-04
2.375"
2.875"
3.500"
644225-08 644738-01
644224-08-00-01
4.000"
644225-10 44149-02
644224-10-00-01
4.500"
4.750"
5.000"
5.500"
44233-04
644225-01 44147-01
__
__
644224-01-00-01
__
__
644225-02 44148-06
644224-02
644222-02 44121-02
644221-02
644225-03 44148-05
644224-03
19243-05
644222-03 44121-03
644221-03
644225-04 44148-07
644224-04
19243-04
644222-04 44121-04
644221-04
644225-05 44148-03
644224-05
2010454-05*
644225-06 44148-01
644224-06-00-01
2010454-06*
644225-07 44148-02
644224-07-00-01
644218-10
644218-16
__
44234-10
__
44122-04
690808-09
644225-11 644738-02
644224-11-00-01
644225-13 44150-01
644224-13
644225-14 644738-03
644224-14-00-01
44123-01
__
690808-12
__
644225-16 44150-03
__
__
644224-16-00-01
__
31215-09
44233-23
44120-10
644218-17
44234-13
__
6.000"
__
__
__
44233-16
44120-02
19375-02
44234-14
44123-02
690808-13
44244-13
6.625"
__
__
__
44233-17
644835-04 19375-03
44234-15
44123-03
690808-14
5.750'
644219-16 44120-01
644221-01
__
44150-04
7.000"
__
__
__
44233-18
44120-04
19375-04
44234-16
44124-01
2010454-14
644225-19 44151-01
7.625"
__
__
__
44233-19
44120-05
644224-20
__
__
44233-22
44120-09
690808-16
__
44151-02
__
44124-02
__
44244-15
7.750"
644210-21-00-01 44234-17
__
19375-11
44244-25
44151-06
19506-09
644224-19-00-01
8.625"
__
__
__
44244-16
44151-03
644224-22
__
19375-06
__
__
__
44120-06
__
__
__
44233-20
__
__
9.000"
__
__
__
44244-24
44151-04
19506-06
9.625"
__
__
__
__
__
__
__
__
__
644225-24 44151-05
644224-24-00-01
10.750"
__
__
__
__
__
__
__
__
__
44244-18
44152-01
038372-00-00-01
11.750"
__
__
__
__
__
__
__
__
__
44244-26
614208-01
614227-01
44233-08
44119-06
19374-06
__
__
__
44244-20
44149-04
31215-16
44233-11
44119-07
19374-07
__
__
__
44244-10
44149-05
31215-17
19374-09
__
__
__
44244-32
44150-08
31215-27
44233-24
44119-08
*After depletion.
21
Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
3.500" Aluminum
4.500" Aluminum
5.000" Aluminum
13-5/8" U BOP
15,000 psi
Top Seal 644226-01
Assembly
Ram
44143-01
__
__
__
__
644227-01
__
__
__
__
44243-02
644228-03
644228-04
644228-05
644228-07
644228-08
44243-11
644228-11
44243-12
__
44144-03
44144-01
44144-02
644739-01
44144-06
644739-02
44144-09
644739-03
44145-03
__
40910-20
644227-03
644227-04
644227-05
644227-07
644227-08
40910-07
644227-11-00-01
40910-08
__
44243-14
44243-15
44243-16
44243-17
44243-22
44243-18
44243-19
44243-20
44243-21
__
__
__
__
__
44145-04
644739-04
44146-01
44146-02
44146-07
44146-03
44146-04
44146-05
44146-06
__
__
__
__
__
40910-09
40910-10
644227-15
644227-16
40910-23
40910-13
40910-14
644227-20
40910-22
__
__
__
__
__
44243-06
44243-08
__
44144-05
44144-08
__
40910-16
40910-05
__
644231-01
__
__
__
44179-01
__
__
__
644231-02
__
44180-03
__
644231-03
644231-04
644231-05
644231-06
644231-07
644231-08
644231-09
644231-10
__
44180-01
44180-02
644740-01
44181-02
644740-02
44181-04
644740-03
44181-06
__
644231-11
644231-12
644231-13
644231-14
__
644231-15
644231-16
644231-17
644231-18
644231-19
644231-20
__
__
__
__
__
__
644230-01
__
__
__
18-3/4" U BOP
10,000 psi
Top Seal 644232-01-00-01
Assembly
Ram
Packer
21-1/4" U BOP
5000 and 10,000 psi
Top Seal 2010939-01
Assembly
Ram
Packer
644234-01
__
__
__
__
__
44184-01
__
__
__
__
__
644233-01
__
__
__
__
__
44262-01
__
__
__
__
__
44214-01
__
__
__
__
__
2010851-19
__
__
__
__
__
644230-03
644230-04
644230-05
644230-06
644230-07
644230-08
644230-09
644230-10
__
44254-02
44254-03
644234-04
44254-06
44254-07
44254-09
644234-10
44254-11
__
44185-01
44185-02
644741-01
44185-05
644741-02
44185-08
644741-03
44185-10
__
41856-01
644233-03
44233-04
41856-04
41856-05
41856-06
644233-10
41856-08
__
44262-02
44262-03
44262-04
44262-06
44262-07
44262-09
44262-10
44262-11
__
44215-01
44215-02
644743-01
44215-05
644743-02
44215-08
644743-03
44215-10
__
40962-01
40962-02
40962-03
40962-04
40962-05
40962-06
2010851-07
40962-08
__
49291-01
49291-02
49291-03
49291-04
__
644230-11
644230-12
644230-13
644230-14
__
44254-13
44254-14
44254-15
44254-16
__
44185-12
044185-13
44185-14
44185-15
__
41856-09
41856-10
41856-11
41856-12
__
44262-13
44262-14
44262-15
44262-16
__
44215-12
044215-13
44215-14
44215-15
__
40962-09
2010851-10
40962-11
40962-12
__
49291-06
49291-07
49292-01
49292-02
49292-03
49292-04
__
__
__
__
__
__
644230-15
644230-16
644230-17
644230-18
644230-19
644230-20
__
__
__
__
__
__
44254-17
44254-18
44254-19
44254-21
__
44185-16
44185-17
44185-18
44185-21
__
41856-13
41856-14
41856-15
41856-20
__
44254-22
__
__
__
44185-20
__
__
__
41856-22
__
__
__
44262-17
44262-18
44262-19
44262-20
44262-21
44262-22
44262-24
__
44215-16
44215-17
44215-18
44216-01
44216-02
44216-03
044216-05
__
40962-13
40962-14
40962-15
40962-20
40962-21
2010851-22
40962-24
__
44254-05
44254-08
__
44185-04
44185-07
__
41856-16
41856-17
__
44262-23
44262-05
44262-08
__
44216-04
44215-04
44215-07
__
40962-23
40962-16
40962-17
__
644230-02
__
Pipe Size
Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
18.625"
20.000"
Packer
644228-01
__
__
__
__
16-3/4" U BOP
3000, 5000 and 10,000 psi
Top Seal 644229-01-00-01
Assembly
Ram
Packer
26-3/4" Bore
2000 and 3000 psi
Top Seal 34200
Assembly
Ram
Packer
Assembly
Ram
Packer
44256-01
__
__
__
__
__
__
__
44149-01
__
__
__
__
__
__
__
2010583-03
__
__
__
__
__
__
__
44260-01
__
__
__
__
__
044209-01
__
__
__
__
__
34201-20
__
__
__
__
__
44256-02
44256-03
44256-04
44256-05
44256-06
44256-07
__
645328-01
44192-02
645328-02
44192-04
645328-03
44193-02
__
2010583-22
31228-04
31228-05
31228-06
2010583-07
2010583-08-01
__
44260-02
44260-03
44260-04
44260-05
44260-06
__
614017-01
614017-02
614018-01
614018-02
614018-03
__
34201-01
34201-02
34201-03
34201-04
34201-05
__
44260-07
44260-08
__
614018-04
614018-05
__
34201-06
34201-07
__
44256-08
44256-09
44256-10
44256-11
__
44193-03
645328-04
44193-05
44193-06
__
31228-09
2010583-10-01
31228-11
31228-12
__
44256-13
44256-14
44256-15
044256-16
44256-17
44256-18
44256-21
44256-19
44256-20
44256-22
__
44193-08
44193-09
44193-10
44194-01
44194-02
44194-03
44194-05
44194-04
44195-01
614459-01
__
31228-14
31228-15
31228-16
31228-17
31228-18
2010583-04-01
31228-24
31228-19
31228-21
31228-25
__
44260-09
44260-10
44260-11
44260-12
__
__
614019-01
614019-02
614019-03
614019-04
__
__
34201-08
34201-09
34201-10
34201-11
__
__
44260-14
44260-15
44260-16
44260-17
44260-18
__
__
614019-06
614020-01
614020-02
614020-03
614020-04
__
__
34201-13
34201-14
34201-15
34201-16
34201-17
__
__
44260-19
__
614021-01
__
34201-18
__
44260-20
614021-02
34201-19
22
Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
The DS shearing blind ram can cut larger diameter tubulars or multiple
tubing strings regardless of their orientation to the centerline of the ram. A blade
seal between the upper and lower faces eliminates the need for moving pipe
after shearing.
Features include of shearing blind rams and DS rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
13
10
12
15
5
7
2
4
SD-9348
4
3
4
11
14
SD-10815
SD-10827
1
Upper Ram
Subassembly
2
Ram
3
Blade
Packer
4
Packer
5
Packer
6
Top
Seal
7
Blade
Insert
8
Set
Screw
9
Lower Ram
Subassembly
10
Ram
11
Packer
46751-01-00-01
644780-02
18-3/4" 10,000
2010187-01 2010192-01
2010188-01 2010191-01
2010186-01
2010191-01
2010190-01
2010193-01
2010182-01
644524-01 2010186-02
12
Packer
13
Top
Seal
14
Blade
Insert
2010193-01
2010183-01
1
Upper Ram
Subassembly
2
Ram
3
Blade
Seal
4
Packer
8
Ram*
9
Packer*
10
Packer*
645078-01
645079-01
645031-02
645080-02
645080-01
644217-02
645078-02
645079-02
645080-01
645080-02
645026-01
645027-01-00-04
645031-01
645494-01
645494-02
645033-01
645026-02
645027-02-00-04
645494-01
645494-02
9
Packer*
10
Packer*
1
Upper Ram
Subassembly
2
Ram
3
Blade
Packer
__
4
Packer
8
Ram*
46792-01-00-03
46210-01-00-04
49358-01
49358-02-00-01
644214-01-00-01 46792-02
49392-01-00-02
49009-01-00-02 2010462-04
46751-04
46752-04
46752-04
614297-01
614275-01
2010462-04
2010460-07
2010461-07
2010453-01
2010460-07
46748-01
46749-01
614297-02
614004-01
614002-01
644435-01-00-01 46751-05
46752-05
644226-01
46766-01
49006-01
46910-03
46752-03-00-01
644229-01-00-01 46766-02
46751-03-00-01
614004-02
46212-01-00-04
49347-01-00-01
__
614274-01
2010460-07
46750-01
046751-01-00-01 046751-01-00-01
614003-01
46751-05
46752-05
49007-01
46751-03-00-01
46751-03-00-01
46773-01
46774-01
46910-03
46751-03-00-01
46752-03-00-01
644229-01-00-01 46773-02
46775-01
046751-03-00-01 46751-03-00-01
46776-01
46777-01
46910-02
46751-02
46752-02
644232-02
46776-02
46778-01
46751-02
46783-01
46784-01
__
615235-01-00-01
__
19514-00-00-01 46783-02
46785-01
615247-01-00-01 615247-02-00-01
46783-01
46784-01
__
615235-01-00-01
__
19514-00-00-01 46783-02
46785-01
615247-01-00-01 615247-02-00-01
49983-01
49981-01
46910-05
46751-06
46752-06
645478-01
49983-02
49982-01
46751-06
46752-06
46788-01
49012-01
46910-05
46751-06
46752-06
645478-01
46788-02
49011-01
46751-06
46752-06
23
46752-02
Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are
also available for the U BOP. The interlocking feature of these rams provides the
capability of shearing wireline and braided cable with zero tension in the line,
while still maintaining a seal. The blades are interlocked by using pockets in the
lower ram and arms on the upper ram to prevent any gap between blade surfaces.
DSI rams are similar to standard DS shear rams except for the interlock
Top Seal
Top Seal
Side Packer
Upper Shear Ram
SD11318-99
SD11320-99
Blade Seal
Upper Shear Ram
Side Packer
Lower Shear Ram
Blade Packer
Side Packer
Top Seal
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM top seals are standard for all U BOP variable bore rams.
CAMRAM packers are available in most sizes. Packer part numbers beginning
with 644xxx indicate CAMRAM. All other packers are standard elastomer
material.
The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe.
SD-5129
Pipe Size
Range
Ram
Subassembly
Ram
Body
Packer
Top
Seal
3-1/2" to 2-3/8"
615066-01
615065-01
614616-02
644214-02-00-01
4 - 2-7/8
644901-01
614605-01
614616-02
644214-02-00-01
5 to 2-7/8
645360-01
644836-01
644926-01-00-01
644217-01-00-01
5" to 3-1/2"
645360-01
644836-01
644926-01-00-01
644217-01-00-01
5" to 2-7/8"
614456-01
644754-01
644931-01
2010453-02
7" to 4-1/2"
46675-01
46671-01
644924-01-00-02
644223-02-00-01
5" to 2-7/8"
645166-01
644744-01
645089-01
644223-02-00-01
7" to 5"
614104-01
614146-01
644924-02
644226-02
5" to 3-1/2"
614129-01
644745-01
644921-01
644226-02
7" to 3-1/2"
46676-01
46672-01
644920-01-00-01
644229-01-00-01
5" to 2-7/8"
49410-01
644746-01
645128-01-00-01
644229-01-00-01
7-5/8" to 3-1/2"
46677-01
46673-01
644927-01
644232-03-00-01
24
Pipe Size
Diameters
Packer
Part No.
Top Seal
Part No.
2-3/8" to 3-1/2"
2010123-01
644217-01-00-01
2010113-01
644223-01-00-01
2-7/8" to 5"
645346-01
644232-04
5" to 7"
645353-01
19514-00-00-01
5" to 7"
645353-01
19514-00-00-01
SD-10315
FLEXPACKER
CAMRAM 350
Top Seal
SD-7786
CAMRAM 350
Packer
7-1/16"
3000-15,000 psi
Top Seal: 644701-01
11"
3000-10,000 psi
Top Seal: 644703-01
11"
15,000 psi
Top Seal: 644705-01
13-5/8"
3000-10,000 psi
Top Seal: 644707-01
13-5/8"
16-3/4"
15,000 psi
3000-10,000 psi
Top Seal: 644709-01 Top Seal: 644711-01
18-3/4"
10,000 psi
Top Seal: 644713-01
Packer
Packer
Packer
Packer
Packer
Packer
Packer
Blind
644700-01
644702-01
644704-01
644706-01
644708-01
644712-01
__
2.375
644700-07
644702-06
644704-05
644706-06
644708-03
644710-01
__
2.875
644700-08
644702-07
644706-07
644708-04
644710-04
__
3.500
644702-08
644706-08
644708-05
644710-05
4.000
644700-09
__
644704-06
__
644702-10
__
644706-10
644710-06
4.500
__
644702-11
644704-09
644706-11
644708-07
__
644712-04
__
644710-07
__
5.000
__
644702-14
__
644702-16
644704-10
__
644706-14
5.500
644708-11
__
644710-09
__
644712-10
__
644706-16
25
U BOP. Also available are offset bore rams for 7-1/16" and 11" BOPs. Contact
a Cameron representative for more information.
Tubing
Size
(In.)
Actual
Centerline
Offset
7-1/16
1.315
1-3/4"
7-1/16
1.660
1-3/4"
7-1/16
1.900
7-1/16
Offset
Range
(In.)
Ram
Assembly
Right-Hand
Ram
(1 Reqd)
Left-Hand
Ram
(1 Reqd)
Right-Hand
Packer
(1 Reqd)
Left-Hand
Packer
(1 Reqd)
Top
Seal
(2 Reqd)
1-3/8 to 1-7/8
44229-01
44108-05
44109-05
21153-07
21154-07
644214-01-00-01
1-3/8 to 1-7/8
44229-02
44108-03
44109-03
21153-04
21154-04
644214-01-00-01
1-3/4"
1-3/8 to 1-7/8
44229-03
44108-01
44109-01
21153-01
21154-01
644214-01-00-01
2-1/16
1-3/4"
1-3/8 to 1-7/8
44229-04
44108-01
44109-01
21153-02
21154-02
644214-01-00-01
7-1/16
2-3/8
1-3/4"
1-3/8 to 1-7/8
44229-05
44108-02
44109-02
21153-03
21154-03
644214-01-00-01
7-1/16
2-7/8
1-3/4"
1-3/8 to 1-7/8
44229-06
44108-04
44109-04
21153-05
21154-05
644214-01-00-01
11
1.660
2"
1-25/32 to 2-7/16
44238-01
44128-04
44129-04
21157-05
21158-05
644217-01-00-01
11
1.900
2-33/64"
1-25/32 to 2-7/16
44238-02
44128-08
44129-08
21157-11
21158-11
644217-01-00-01
11
2-1/16
2"
1-25/32 to 2-7/16
44238-04
44128-01
44129-01
21157-02
21158-02
644217-01-00-01
11
2-3/8
2-1/8"
1-25/32 to 2-7/16
44238-05
44128-02
44129-02
21157-03
21158-03
644217-01-00-01
11
2-7/8
2"
1-25/32 to 2-7/16
44238-07
44128-03
44129-03
21157-04
21158-04
644217-01-00-01
11
3-1/2
2"
1-25/32 to 2-7/16
44238-08
44128-05
44129-05
21157-06
21158-06
644217-01-00-01
BOP Size
7-1/16"
11"
644909-02
11
15,000 All
644831-08
13-5/8"
644909-03
13-5/8
15,000 All
644831-12
16-3/4"
644831-14
16-3/4"
644831-15
18-3/4"
644909-04
20-3/4"
644831-17
21-1/4"
644831-18
21-1/4"
644831-19
21-1/4"
644831-21
26-3/4"
644831-22
18
24
26
42
19
34
SD-5287
25
32
28
27
33
31
21
20
30
29
Item Number*
Description
Item Number*
Description
18
29
19
30
20
31
21
Ring, Backup
32
24
33
25
34
26
39
Packing, Plastic**
27
42
28
O-Ring, Wiping
26
The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads
and reduces the time required for making up and breaking out bonnet bolts.
The hydraulic bonnet bolt is completely interchangeable with conventional
bonnet bolts. It has a standard hexagonal head. An additional external
thread mates with the internal threads in the operating head of the hydraulic
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod
permanently secured in the machined hole in the center of the bolt.
The hydraulic bonnet bolt tensioner consists of a compact tensioner unit
with a remote pump.
Bonnet
Bolt
Compact
Tensioner Unit
49795-13-10
614644-13-10*
49795-13-05
614644-13-05*
49917-13-05
614644-13-05*
49795-13-10
614644-13-10
49917-13-10
614644-13-10*
49795-13-15
614644-13-15**
49795-16-05
614644-16-05*
49917-16-05
614644-16-05
49795-16-10
614644-16-10**
49795-18-10
614644-18-10**
49795-21-05
614644-18-10**
BOP
Size
Bonnet Seal
Part Numbers
BOP
Size
Pressure Rating
(psi)
Bonnet
Seals
Connecting
Rod Seals
7-1/16"
644197-01-00-01
212741-37-00-01
11"
644197-02-00-01
212741-38-00-01
644898-01
212741-38-00-01
11"
15,000 Model 79
49272-03
212741-38-00-01
644573-03
212741-36-00-01
13-5/8"
644197-03-00-01
212741-36-00-01
644898-02
212741-36-00-01
13-5/8"
15,000
49272-02
212741-36-00-01
644573-04
212741-44
16-3/4"
46613-04
212741-44
644573-04
212741-44
18-3/4"
10,000
644197-05-00-01
212741-60
644573-05
212741-60
20-3/4"
3000
644197-06
212741-36-00-01
644573-06
212741-36-00-01
21-1/4"
2000
644197-06
212741-36-00-01
644573-06
212741-36-00-01
21-1/4"
644197-08
11741-58
644573-08
212741-36-00-01
21-1/4"
644197-07
11741-58
644573-07
212741-36-00-01
26-3/4"
3000
46613-08
212741-36-00-01
644573-08
212741-36-00-01
644573-01
212741-37
644573-02
212741-38-00-01
BOP
Size
Seal Carrier
Qty.
Retainer Ring
Part No.
Qty.
Part No.
Bonnet Seals
Qty.
Part No.
645464-02-00-01
702640-27-61
645484-02-00-01
645507-01-00-01
702645-27-91
645509-01-00-01
2010145-01
702645-27-71
2010146-01
2010185-01
702645-28-31
2010184-01
UII
645464-01
645485-01-00-01
645484-01-00-01
27
U II BOP
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure
is applied to open the BOP.
A pressure balance chamber is used with the wedgelocks to eliminate the
possibility of the wedgelock becoming unlocked due to hydrostatic
pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 31 and 32 for
rams available to fit the U II BOP.
The Cameron U II BOP takes all of the features of the U BOP and adapts them
for subsea use in the 18-3/4 10,000 and 15,000 psi WP sizes.
Like all other Cameron preventers, the rams in the U II BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure. Other features of the U II BOP
include:
Internally ported hydraulic stud tensioning system ensures that stud loading
is consistently accurate and even.
Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
SD-10829
28
SD-8630
Gallons to Open
Pipe Rams (1 Set)
22.3
Gallons to Close
Pipe Rams (1 Set)
24.7
Gallons to Open
Bonnets (1 Set)
33.7
Gallons to Close
Bonnets (1 Set)
25.2
Closing
Ratio
6.8:1
Opening
Ratio
2.5:1
32.3
34.7
43.9
35.2
9.3:1
3.5:1
5.5
0.66
25.8
28.3
37.4
28.7
7.6:1
2.9:1
5.5
0.66
U II BOP Dimensions
The following designations refer to the dimensional drawing:
SD-5139
F-1
F-2
G
H-1
H-2
J
E-2
E-1
A-1
A-2
B-1
B-2
B-3
C
D
SD-5139
A-1
(In.)
A-2
(In.)
185.500
B-1
(In.)
__
147.000
147.000
185.500
87.125
148.375
186.875
148.375
186.875
B-2
(In.)
C
(In.)
E-1
(In.)
E-2
(In.)
F-1
(In.)
F-2
(In.)
G
(In.)
43.125
B-3
(In.)
__
42.50
20.500
13.938
22.250
15.688
11.5
74.000
__
42.50
20.500
13.938
22.250
15.688
11.5
64.750
53.125
__
47.25
23.875
18.062
26.625
20.812
98.875
87.250
84.5
47.25
23.875
18.062
26.625
20.812
29
H-1
(In.)
__
H-2
(In.)
__
J
(In.)
__
Weight
(Lbs)
45.062
__
19.625
__
56,950
11.5
51.625
__
11.5
58.000
52.188
22.625
69,800
29,950
36,700
41
11
29
42
41
43
42
43
38
4
30
31
44
45
33
48
34
36
35
37
49
3a
3b
32
40
19
54
42
41
39
10
24
26
27
25
28
51
SD-7866
22
23
2
52
14
13
12
15
16
17
18
19
21
20
U II Exploded View
53
Description
Description
Qty Qty
Sgl Dbl
18-3/34"
10,000 psi
18-3/4"
15,000 psi
Item
No.
Description
Description
Qty Qty
Sgl Dbl
18-3/34"
10,000 psi
18-3/4"
15,000 psi
Body, Clamped
644102-02
615239-03
29
Stud, Wedgelock
12 24
44854-12
44854-12
Intermediate Flange
615303-01
30
Nut, Wedgelock
12 24
12955-16
12955-16
3a
Bonnet
31
33186-47
33186-47
3b
Bonnet
615302-01
__
614722-03
__
614621-01
32
707232
707232
Piston, Operating
614623-01
33
614742-03
614742-03
615304-01
__
614623-05
34
702640-34-31
702640-34-31
614618-02
614618-02
35
702640-44-21
702640-44-21
614618-01
614618-01
36
702640-44-01
702640-44-01
30273-16
30273-16
37
8 16
615727-01
615727-01
Stud, Bonnet
8 16
644031-18-10
644612-18-15
38
707233
707233
8 16
615453-18-10
615453-18-15
39
Connector, Tubing
707159
707159
10
8 16
615452-18-10
615452-18-15
40
614672-04
614672-04
11
8 16
644018-18-10
615451-18-15
41
Gland, Bleeder
6 12
17454-08
17454-08
12
30313-11
30313-11
42
Plug, Bleeder
6 12
17454-09
17454-09
13
Lantern Ring
615332-02-00-00 615332-02-00-00
43
Lifting Eye
11849
11849
14
614672-05
614672-05
44
707231
707231
15
Ring, Backup
610108-15
610108-15
45
49223-18
16
710671
710671
45
49223-16
__
17
Retainer Plate
615210-01
615210-01
46
710546
18
Retainer Ring
41008-08-00-52
41008-08-00-52
46
710545
__
19
Bonnet, Seal
644169-01-00-01 644169-01-00-01
47
O-Ring
* **
20
Connector, Tubing
707276
707276
48
Cylinder, Operating
21
708490-01
708490-01
48
Cylinder, Operating
30101-63-13-85 702640-47-11
__
- 30274-15
__
644613-01
615627-01
615627-01
22
Protective Cover
49
23
Cap Screw
6 12
702500-16-00-10 702500-16-00-10
50
Plastic Packing
24
5940-09
5940-09
51
25
005930-05-10
005930-05-10
52
Ring, Backup
26
M517988
M517988
53
27
702585-36-00-93 702585-36-00-93
54
28
710670
32 64
4
710670
*4 required for 18-3/4" 10,000 psi BOP; 2 required for 18-3/4" 15,000 psi BOP.
**8 required for 18-3/4" 10,000 psi BOP; 4 required for 18-3/4" 15,000 psi BOP.
Alternate parts for 18-3/4 15,000 psi assembly with operating cylinder.
30
49223-19
710851
614348-10
614348-10
7650-08
7650-08
710640
710640
610108-28
610108-28
- 709493
709493
615402-01
615402-01
54
615402-02
55
615402-02
__
10 20
702640-46-91
Top Seal
Pipe
PipeSize
Size
Packer
SD-5307
Assembly
Ram
Blind
644248-01
615407-01
644247-01*
Packer
2.375"
644248-02
614770-01
644247-02*
2.875"
644248-03
614770-02
644247-03*
3.500"
644248-04
644742-01
644247-04*
3.500" Aluminum
644248-05
614770-04
644247-05
4.000"
644248-06
614770-05
644247-06
4.500"
644248-07
644742-02
644247-07
4.500" Aluminum
644248-08
614770-07
644247-08
4.750"
644248-09
614770-08
644247-09
5.000"
644248-10
644742-03
644247-10-00-01
5.500"
644248-11
614770-10
644247-11*
6.000"
644248-12
614770-12
644247-12
6.625"
644248-13
644742-04
644247-13
7.000"
644248-14
614770-14
644247-14
7.625"
644248-15
614770-15
644247-15
8.625"
644248-16
614770-16
644247-16
9.000"
644248-17
614770-17
644247-17
9.625"
644248-18
614770-18
644247-18-00-01
Ram Body
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all U II BOP variable bore
rams. The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe.
SD-5129
Ram Body
Pipe
Size Range
Ram
Assembly
Ram
Body
Packer
Packer
7.625" to 3.500"
5.000" to 2.875"
7.625" to 5.000"
5.000" to 3.500"
614879-01
614878-01
614879-01
614878-01
614846-01
644748-01
614846-01
644748-01
644918-01
644919-01
644918-01
644919-01
Top
Seal
645282-01-00-01
644246-02
645282-01-00-01
644246-02
For applications where only bonnet and/or connecting rod seals are
required, Cameron offers individually packaged components.
Temperature Range
Bonnet Seal
644169-01-00-01
710671
644169-03
711871
31
1
2
7
SD-10827
Description
Description
Upper Ram Assembly
2010214-01
Ram
2010216-01
Blade Packer
Packer
615567-01
Packer
615568-01
**6
7
12
10
46910-05
Top Seal
645282-01-00-01
2010215-01
*8
Ram
2010217-01
*9
Packer
615567-01
*10
Packer
615568-01
SD-10815
3
5
1
11
Description
Description
644759-01
Ram
644752-01
Blade Insert
644519-03
Cap Screw
644524-01
Description
Description
644759-02
644904-01
10
Ram
644752-02
644905-01
11
Blade Insert
644519-02
644905-02
12
Pin
200231-00
645246-01
Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.
CAMRAM 350
Top Seal
Part No.
Blind
Packer
644714-01
2.375"
Packer
644714-02
2.875"
Packer
644714-03
3.500"
Packer
644714-04
5.000"
Packer
644714-10
5.500"
Packer
644714-11
SD-7786
CAMRAM 350
Packer
32
T BOP
Hydraulic stud tensioning ensures that stud loading is consistently accurate
and even.
Hydraulically operated locking mechanisms, ST locks, act directly on the
operating piston tailrod and are interlocked by sequence caps to ensure that
locks are opened before the BOP is opened.
Bonnet studs instead of bonnet bolts reduce the need to make and break
threads in the BOP body.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The standard T BOP has a large enough piston area to shear all commonly
used sizes and grades of drill pipe.
Other features include hydraulically opening bonnets, forged body and
a wide selection of rams to meet all applications. See pages 40 and 41 for
rams available to fit the T BOP.
SD-9599
33
Gallons to Open
Pipe Rams (1 Set)
Gallons to Close
Pipe Rams (1 Set)
Gallons to Open
Bonnets (1 Set)
Gallons to Close
Bonnets (1 Set)
Closing
Ratio
Opening
Ratio
4.3:1
Gallons to Unlock
ST Locks (1 Set)
__
Gallons to Lock
ST Locks (1 Set)
__
12.9
13.9
15.43
13.75
8.6:1
22.4
24.3
27.63
24.64
6.7:1
3.1:1
3.42
3.41
SD-10806
SD-10806
Part Number
34
Description
645035-02
615309-01
615309-02
708490-01
T BOP Dimensions
D
Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are
available in single, double and modular configurations. In addition, end
preparations can be API flange, clamp hub or studded connections.
The following designations refer to the T BOP dimensional drawings on this
page:
A-1 Length -- bonnets closed, with ST locks
A-2 Length -- bonnets opened, with ST locks
A-3 Length -- bonnets closed, locking screws locked
A-4 Length -- bonnets opened, locking screws unlocked
B-1 Height -- flanged
B-2 Height -- clamp hubs
B-3 Height -- studded x flanged
B-4 Height -- modular
C
Width -- no side outlets
E-1
E-2
E-3
E-4
F-1
F-2
F-3
F-4
G
H
J
F
E
SD-8635
SD-8491
C
D
SD-8635
SD-8492
A-3
124"
A-4
175.6"
B-1
43.6"
B-2
34.4"
B-3
33.5"
B-4
23.3"
C
32"
E-1
26.7"
E-2
22.1"
E-3
16.6"
E-4
16.6"
F-1
18"
F-2
13.4"
F-3
7.9"
F-4
7.9"
G
7.5"
H
24.6"*
J
24.6"
Weight
15,500 lb
Double
124"
58.1"*
32"
26.7"
22.1"
16.6"
18"
13.4"
7.9"
7.5"
24.6"*
24.6"
27,650 lb
A-1
177"
A-2
217"
B-1
64.2"
B-2
53"
B-3
49"
B-4
32.1"
C
47"
E-1
40.6"
E-2
35.1"
E-3
25.6"
E-4
24.6"
F-1
26.4"
F-2
20.8"
F-3
11.3"
F-4
10.3"
G
11.5"
H
34"*
J
34"
Weight
44,000 lb
Double
177"
217"
98.3"*
87"*
83.1"*
47"
40.6"
35.1"
25.6"
26.4"
20.8"
11.3"
10.3"
11.5"
34"*
34"
85,000lb
35
7
5
8
13
10
SD-10809
11
16
Description
Description
Body (Type)
Qty
1
Part No.
644765-01
Item
Item
9
Bonnet Subassembly, RH
Description
Description
Qty
Part No.
644797-01
2*
Plug
201026
10
Bonnet Subassembly, LH
644797-02
TX Bonnet Gasket
644799-01
11
Nut Subassembly
644616-02
Screw, 12 Pt Cap
24
702585-14-00-10
12
Collar Subassembly
644789-01
Bonnet Stud
644652-01
13
O-Ring
702640-32-31
Bearing Retainer
644653-01
14*
Pipe Plug
201024
Split Bearing
644654-01
Wear Ring
614742-10
15*
16
Pipe Plug
Ram Guide Pin
4
4
675029-49
644658-01
*Not shown.
36
46
44
45
42
43
79
78
86
37
47
48
40
41
39
60
53
36
49
50
57
59
38
66
61
56
51
74
73
72
68
67
62
63
51
54
84
SD-10808
69
64
52
58
55
85
30
65
77
76
75
71
70
32
31
33
35
34
Description
Bonnet
Qty.
1
Part No.
Item
Description
Qty.
Part No.
644630-01
59
18572-18
31
644631-01
60
702640-36-01
32
O-Ring
644768-02
61
Screw, 12 Pt Cap
702585-06-00-30
33
644791-01
62
Backup Ring
644771-01
34
Seal Ring
710410
63
Seal Ring
710369
35
Wear Ring
614742-08
64
Retainer Ring
644737-01
36
644637-01
65
708393
37
644637-02
66
644734-01
38
Seal Ring
710505
67
Locking Screw
644733-01
39
Wear Ring
614742-09
68
702645-45-91
40
644640-01
69
644450-03
41
702640-33-61
70
Nut
644792-01
42
644641-01
71
Button
644635-01
43
Backup Ring
644381-06
72
644651-01
44
Seal Ring
710504
73
644438-02
45
702640-34-11
74
644439-02
46
644642-01
75
644650-01
47
644643-01
76
702640-36-22
48
702640-33-81
77
33186-05
49
644644-01
78
Gland
17454-46
50
Screw, 12 Pt Cap
12
702585-14-00-26
79
Blind Plug
17454-36
51
Backup Ring
644381-05
80*
Check Valve
709493
52
Seal Ring
710430
81*
640202-02
53
Seal Carrier
644726-01
82*
615684-02
54
702640-35-21
83*
702640-11-31
55
Seal Ring
609745-14
84
Tubing Connector
707276
56
Backup Ring
644381-04
85
Male Quick-Disconnect
708490-01
57
Seal Ring
710429
58
Retainer Ring
644648-01
*Not shown
37
5
8
13
10
11
17
12
16
SD-8060
Description
Description
Body (Typical)
Qty
1
Part No.
Item
Item
644622-01
Description
Description
Bonnet Subassembly, RH
Qty
2
Plug
201026
10
Bonnet Subassembly, LH
644770-01
11
Nut Subassembly
16
Screw, 12 Pt Cap
48
702585-14-00-10
12
Collar
16
Bonnet Stud
16
644362-01
13
O-Ring
16
17
Bearing Retainer
644361-01
Split Bearing
16
644360-01
Wear Ring
16
614742-04
38
8
16
Part No.
644562-01-02-01
644562-02-02-02
644616-01
615707-01
702640-32-61
644399-01
711202
47
48
41
38
40
39
37
36
61
60
69
61
46
70
44
45
42
43
50
49
53
58
55
52
62
65
51
52
51
51
59
56
54
57
SD-8061
83
81
82
80
79
78
63
76
75
73
74
30
64
31
77
33
35
34
Description
Qty.
Part No.
Item
Description
Qty.
Part No.
30
Bonnet
644414-01
55
Seal Ring
709630
31
644470-01
56
644355-01
32
702645-38-71
57
644356-01
33
644483-04
58
709503
34
Seal Ring
709635
59
702645-45-31
35
Wear Ring
614742-06
60
644491-02
36
644301-01
61
702640-21-41
37
644301-02
62
Screw, 12 Pt Cap
702585-06-00-42
38
Seal Ring
709632
63
644450-01
39
Wear Ring
614742-05
64
Cap Nut
644447-01
40
615685-01
65
ST-Lock Assembly
645021-01
41
702640-34-81
69
Gland, Tubing
17454-46
42
615711-01
70
Blind Plug
17454-36
43
Backup Ring
644381-03
71*
Valve, Check
709643
44
Seal Ring
709633
73
615684-02
45
702640-42-81
74
702640-11-31
46
615712-01
75
Connector, Tubing
707276
47
615713-01
76
Male Quick-Disconnect
708490-01
48
702640-42-51
77
Button
615706-01
49
644358-03
78
644438-01
50
Screw, 12 Pt Cap
12
702585-14-00-20
79
644359-01
51
Backup Ring
644381-02
80
644439-01
52
Seal Ring
709631
81
615709-01
53
Wear Ring
644443-01
82
702645-37-71
54
Backup Ring
644381-01
83
709636
*Not shown
Description
Connecting Rod Seal
Part Number
712022
55
712021
39
CAMRAM Packer
Ram Body
SD-10824
Wear Pad
Screw
Pipe Size
Ram
644479
__
Packer
644427
__
Assembly
644458
Ram
644401
Packer
644486
Blind
Assembly
644457
__
()-01
()-01
()-01**
1.315"
__
__
__
()-02
()-02
()-02
1.660"
__
__
__
()-03
()-03
()-03
1.900"
__
__
__
()-04
()-04
()-04
2.062"
__
__
__
()-05
()-05
()-05
2.375"
()-01
()-01
()-02
()-06
()-06
()-06**
2.875"
()-02
()-02
()-03
()-07
()-07
()-07**
3.500"
()-03
()-03
()-04**
()-08
()-08
()-08**
4.000"
()-04
()-04
()-05
()-10
()-10
()-10
4.500"
()-05
()-05
()-06
()-12
()-12
()-12**
4.750"
()-06
()-06
()-07
()-14
()-14
()-14
5.000"
()-07
()-07
644427-08-00-01
()-15
()-15
()-15**
5.500"
()-08
()-08
()-09
5.562'
()-09
()-09
()-10
()-17
__
()-17
__
()-17**
__
6.000"
()-10
()-10
()-11
()-18
()-18
()-18
6.625"
()-11
()-11
()-12
()-19
()-19
()-19
7.000"
()-12
()-12
()-13
()-20
()-20
()-20**
7.625"
()-13
()-13
()-14
()-21
()-21
()-21**
8.625"
()-14
()-14
()-15
()-22
()-22
()-22
9.000"
()-15
()-15
()-16
()-23
()-23
()-23
9.625"
()-16
()-16
()-17
10.750"
()-17
()-17
()-18
()-24
__
()-24
__
()-24**
__
11.750"
()-18
()-18
()-19
__
__
__
13.375"
()-19
()-19
()-20**
__
__
__
3.500" Aluminum
()-20
()-20
()-21
()-09
()-09
()-09
4.000" Aluminum
()-21
()-21
()-22
()-11
()-11
()-11
4.500" Aluminum
()-22
()-22
()-23
()-13
()-13
()-13
5.000" Aluminum
()-23
()-23
()-24
()-16
()-16
()-16
Base numbers remain the same. Dash numbers change by pipe size.
**Currently available.
***Additional part numbers include: right side wear pad, 644509-01; left side wear pad, 644510-01; and, screws, 644349-01.
****Additional part numbers include: right side wear pad, 644590-01; left side wear pad, 644590-02; and, screws, 644349-01.
Top Seal
645068-01
3-1/2" Packer
645070-04
5" Packer
645070-08
40
10
11
7
2
6
9
8
Description
Right Packer
Upper SBR
3
4
Left Packer
Top Seal*
644893-02
645068-01
Blade Packer
644894-01
SD-10830
Lower SBR
*The part numbers listed above are used for both standard
and high temperature applications except for the top seal.
Description
1
2
3
4
5
6
7
8
9
10
11
Body
Right Packer
Left Packer
Top Seal
Blade Packer
Right Wear Pad
Left Wear Pad
Screw
Blade Insert
Screw
Pin
13-5/8" T BOP
Upper SBR
644514-01
Lower SBR
644514-02
Upper SBR
644591-01
Lower SBR
644591-02
644515-01
644893-01
644893-02
644369-01-00-01
644894-01
644509-01
644510-01
644349-01
644519-03
644524-01
__
644515-02
644893-01
644893-02
644369-01-00-01
__
644402-01
644490-01
644490-02
644409-01
644541-01
644590-01
644590-02
644349-01
644581-01
644582-01
__
644402-02
644490-01
644490-02
644409-01
__
644509-01
644510-01
644349-01
644519-02
__
200231
644590-01
644590-02
644349-01
644581-02
__
200231
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all T BOP variable bore rams.
The variable bore ram packer contains steel reinforcing inserts similar to those in
the Cameron annular BOP packer. The inserts rotate inward when the rams are
closed so the steel provides support for the rubber which seals against the pipe.
CAMRAM Packer
Ram Body
SD-10831
Screw
Assembly
Body
Right
Left
Wear Pad
Screw
Wear Pad
2.875" to 5.000"
644618-01
644567-01
644549-01
3.500" to 5.000"
644533-02
644576-01
644531-01-01
644409-01
644590-01
644590-02
644349-01
644369-01-00-01
644509-01
644510-01
3.500" to 7.625"
644533-01
644575-01
644349-01
644404-01-00-01 644369-01-00-01
644509-01
644510-01
644349-01
Packer
41
Top Seal
TL BOP
18-3/4 15,000 TL BOPs utilize ST locks which are hydraulically
operated and act directly on the operating piston tailrod and are
interlocked by sequence caps to ensure that locks are opened before the
BOP is opened.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.
TL BOP Rams
Rams available for the 5000 and 10,000 psi TL BOP include standard pipe
rams as well as Cameron Flexpackers in 5 to 7 and 2-7/8 to 5 pipe sizes.
Also, a DVS shear ram was developed for the TL BOP. The DVS shear ram
is similar to a Cameron shearing blind ram and has two V blades for more
effective shearing. During testing, these rams sheared 6-5/8, 27.6 lb per foot,
S-135 pipe with 2200 psi closing pressure.
The 15,000 psi TL BOP uses the same field proven rams as the 18-3/4
15,000 psi T BOP.
TL BOP Specifications
BOP Size
and
Working Pressure
18-5/8" 10,000 psi
18-5/8" 15,000 psi
Weight w/ Wedglocks
Single
STD X Flange
23,100 lb
38,100 lb
Weight w/ Wedglocks
Double
STD X Flange
36,600 lb
58,400 lb
Weight w/ Lockscrews
Single
STD X Flange
21,900 lb
36,600 lb
Weight w/ Lockscrews
Double
STD X Flange
42,400 lb
55,400 lb
Height
Single
STD X Flange
41.25
47.37
Height
Single
Hub X Hub
41.12
51.12
Height
Double
STD X Flange
67.75
76.59
Height
Double
Hub X Hub
68.62
80.25
BOP Size
and
Working Pressure
18-5/8" 10,000 psi
18-5/8" 15,000 psi
Length
Wedglocks
Bonnets Closed
151.00
151.00
Length
Wedglocks
Bonnets Open
184.00
184.00
Length
Lockscrews Locked
Bonnets Closed
158.38
164.68
Length
Lockscrews Unlocked
Bonnets Open
218.38
221.75
Height
Closing
Single
Volume
STD X Flange
20.20 Gallon
24.30 Gallon
Height
Opening
Single
Volume
Hub X Hub
19.40 Gallon
22.40 Gallon
Height
Closing
Double
Ratio
STD X Flange
10.3:1
6.7:1
Height
Opening
Double
Ratio
Hub X Hub
3.2:1
3.1:1
42
Height
Length Bonnets
Closed
147.10
Length Bonnets
Open
180.03
Closing
Volume
20.2 gal.
Opening
Volume
19.4 gal.
Closing
Ratio
10.3:1
Opening
Ratio
2.3:1
18,700 lb
33.5
17,500 lb
33.5
148.0
207.0
20.2 gal.
19.4 gal.
10.3:1
2.3:1
36,000 lb
59.25
147.10
180.03
20.2 gal.
19.4 gal.
10.3:1
2.3:1
33,600 lb
59.25
148.0
207.0
20.2 gal.
19.4 gal.
10.3:1
2.3:1
59
8
60
19 18
51
61
17
24
58
21
11 22
16 15
16 17
55
56
43
34
52
42
2
36
25
44
12
13 14
54
10
21
20
32
23
48
46
61
40
26
50
37
33
51
35
35
60
28
39
49
24
30
31
27 29
38
7
43
41
38
37
33
31
30
35
35
47
45
SD-11128-99
Description
Item
Description
Item
Description
Item
Description
Body
16
31
46
Bonnet
17
Back-Up Ring
32
47
18
33
48
19
34
O-RIng
49
20
35
50
21
Bonnet Seal
36
51
Lifting Eye
22
37
52
Vent Plug
Bonnet Stud
23
38
54
Dowel Pin
24
Wedgelock Housing
39
Wedgelock
55
Patent Nameplate
10
25
Double-Ended Stud
40
Wedgelock Piston
56
11
26
41
Stud
58
Double-Ended Stud
12
27
42
Stud
59
13
Back-Up RIng
28
43
60
Tubing Gland
14
29
44
61
Blind Plug
15
30
45
43
UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers
designed for easy maintenance and long life. Both designs complement the
existing line of U preventers with interchangeable bonnets which can be
installed on any comparable size U BOP. In addition, the bonnet of the UM
BOP features full stroke operation for one-step ram removal. Other features of
the UL and UM BOPs include:
Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, are available for
subsea applications.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The UL and UM BOPs utilizes the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.
SD-11255-99
UL Blowout Preventer
44
UL BOP Components
34
22
33
42
35
31
23
31
26
27
39
32
37
30
20
38
28
29
41
34
33
43
37
35
24
46 47
25
36
40
51
10
14
12
11
19
50
18
16
17
17
16
15
13
SD-11256-99
WP UL BOP Components
Item
1
Description
Solid Block Body
Qty.
1
Item
26
8
2
Description
Qty.
Bonnet
27
Operating Piston
28
29
30
31
32
10
33
Seal Ring
11
34
12
35
13
36
14
37
15
38
16
16
39
16
17
40
41
2
2
18
42
Booster Piston
19
43
20
Locking Screw
46
22
47
23
Operating Cylinder
50
Bonnet Bolt
24
25
Cylinder Head
Stud for Cylinder Head
2
8
51
45
Packer Inserts
Bore of Top
Quick-Release Top
Access Flaps
Packer
Vent
Donut
Pusher Plate
SD-203-03
Operating Piston
Vent
46
Size and
Working Pressure
17
11
37
10
46
12
45
67
66
Height
(Inches)
Diameter
(Inches)
23-15/16
27-7/8
25-1/2
27-7/8
34-7/32
Weight
(Pounds)
Gallons
to Close
Gallons
to Open
2738
1.69
1.39
2778
1.69
1.39
37-3/8
7255
2.94
2.55
44-3/4
43-1/4
12,000
6.94
6.12
50-3/4
48
17,716
8.38
7.56
32-1/2
41-1/4
8255
5.65
4.69
34-15/16
41-1/4
8447
5.65
4.69
41-1/16
48-1/2
13,954
10.15
9.05
62-1/2
61
36,500
23.50
21.30
36-11/16
50
12,855
12.12
10.34
40-3/16
52-3/8
16,215
12.12
10.34
49-3/32
61
27,262
18.10
16.15
47
60-1/2
25,950
22.30
19.00
49
60-1/2
26,300
22.30
19.00
60-13/16
62
29,560
35.60
29.00
70-1/2
67
40,632
51.00
45.10
54-3/4
66
29,500
40.50
28.40
53-5/16
66
29,000
40.50
28.40
Item
No.
36
6
55
15
50
31
69
57
60
52
58
4
59
14
13
53
63
68
64
56
65
3
51
62
54
61
29
34
30
Item
No.
Description
Body
43
Stud
Top
44
Nut
Piston
45
46
47
Lifting Eye*
Pusher Plate
50
51
Lock Ring
52
10
Actuator Ring
53
11
Actuator Screw
54
12
55
13
56
14
57
15
Support Plate
58
16
59
17
60
29
Anchor Shackle
61
30
62
31
63
32
Stud
64
33
Nut
65
34
66
35
67
36
68
37
69
38
Lifting Eye*
75
39
Lifting Eye*
76
40
Lifting Eye*
77
41
42
Lifting Eye*
Lifting Eye*
78
1
35
Description
SD-5306
7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers
Item
Description
Qty
3 Piston
4 Inner Cylinder Head
5 Outer Cylinder Head`
6 Pusher Plate
7 Donut & Packer****
9 Lock Ring
10 Actuator Ring
11 Actuator Screw
12 Actuator Screw Bushing
13 Outer Cylinder Lock Segment
14 Lock Segment Retaining Ring
15 Support Plate
16 Top Trash Seal
17 Actuator Screw Bearing
29 Anchor Shackle
30 Inner Cylinder Stud
31 Inner Cylinder Nut
32 Stud
33 Nut
34 Lock Ring Access Port Plug
35 Hydraulic Port Plug
36 Pusher Plate Screw
37 Actuator Ring Stop Screw
38 Lifting Eye*
39 Lifting Eye*
40 Lifting Eye*
41 Lifting Eye*
42 Lifting Eye*
43 Stud
44 Nut
45 Bushing Retaining Screw
46 Oil Injection Fitting
47 Lifting Eye*
50 Support Plate Bearing Ring
51 Piston ID Bearing Ring
52 Inner Cyl. OD Bearing Ring
53 Outer Cyl. ID Bearing Ring
54 Piston OD Bearing Ring
55 Pusher Plate Bearing Ring
56 Outer Cyl. ID Wiper Ring
57 Inner Cyl. OD Wiper Ring
58 Inner Cylinder ID Lip Seal
59 Inner Cylinder ID Lip Seal
60 Inner Cylinder OD Lip Seal
61 Piston ID Lip Seal
62 Piston OD Lip Seal
63 Outer Cylinder ID Lip Seal
64 Outer Cylinder OD Lip Seal
65 Outer Cylinder OD Lip Seal
66 Top ID Lip Seal
67 Top OD Lip Seal
68 Outer Cylinder ID Lip Seal
69 Inner Cylinder OD Lip Seal
75 Inner Cyl. ID Backup Ring*
76 Inner Cyl. OD Backup Ring*
77 Outer Cyl. ID Backup Ring*
78 Top ID Backup Ring*
*** Complete Replacement Kit
1
1
1
1
1
1
1
4
4
1
1
8
4
8
8
2
2
24
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
Part No.
699333-01
699334-01-02
699335-01
699336-01
644856-02
699337-01
699338-01
49089-03
699343-03
__
__
2010341-01
46045-05
699344-03
701002
46037-24
49800-01
__
__
5930-04-10
5930-04-10
46052-04
46052-03
700734
12185-03
12185-02
700735
__
__
__
5940-01-18
700710
__
49122-01
2010196-13
2010196-01
2010196-02
2010196-14
699345-04
700713
700715
615851-31-01
615851-32-01
615847-30-01
615851-33-01
615847-31-01
615851-30-01
615847-29-01
615847-28-01
615851-29-01
706258-11
__
__
__
__
__
__
49742-01
7-1/16" 10,000
psi
Qty
1
1
1
1
1
1
1
4
4
1
1
8
4
12
12
2
2
24
4
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
Part No.
699333-02
699334-02-02
699335-02
699336-02
644856-03
699337-02
699338-02
49089-01
699343-01
__
__
7-1/16" 15,000
psi
Qty
1
1
1
1
1
1
1
4
4
2010341-02
1
46045-06
1
699344-01
8
701003
4
46037-16
12
49800-01
12
__
__
5930-05-10
2
5930-05-10
2
46052-05
24
46052-01
4
700734
4
12185-03
4
12185-02
4
700735
4
__
__
__
702514-25-20-08 4
700710
4
12185-01
49122-02
1
2010196-15
1
2010196-03
1
2010196-04
1
2010196-16
1
699345-05
1
700810
1
700809
1
615850-24-01
1
615851-26-01
1
615847-26-01
1
615851-27-01
1
615847-27-01
1
615851-25-01
1
615847-25-01
1
615847-24-01
1
615850-23-01
1
706258-04
1
__
1
__
1
__
__
__
__
1
49742-02
1
Part No.
699333-10
699334-10
699335-10
699336-10
644856-11-00-01
699337-10
699338-10
49089-01
699343-01
__
__
7-1/16" 20,000
psi
Qty
1
1
1
1
1
1
1
4
4
3
1
049793-15
1
46045-14
1
699344-01
8
663311-13
4
46037-30
12
49800-08
12
__
__
5930-07-10
2
5930-05-10
2
46052-08
24
46052-01
4
12185-03
4
12185-02
4
700735
4
700734
2
__
__
__
702514-25-20-08 4
700710
4
__
49122-07
1
2010196-36
1
2010196-33
1
2010196-34
1
2010196-35
1
699345-08
1
705151
1
705152
1
615850-37-01
1
615851-35-01
1
615846-26-01
1
615851-36-01
1
615847-35-01
1
615850-36-01
1
615847-32-01
1
615847-33-01
1
615850-35-01
1
706258-01
1
615851-34-01
1
615847-34-01
1
__
1
__
1
__
1
615399-07
1
49742-13
1
48
Part No.
Part No.
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
5930-07-10
2
5930-05-10
2
46052-08
24
46052-01
4
12185-03
4
12185-02
4
700735
2
700734
4
__
2
__
__
702514-25-20-08 4
700710
2
__
2
49122-07
1
2010196-32
1
2010196-33
1
2010196-34
1
2010196-31
1
699345-08
1
705151
1
705152
1
615851-35-01
1
615850-37-01
1
615846-26-01
2
615851-36-01
1
615847-37-01
1
615850-36-01
2
615847-36-01
1
615847-36-01
1
615850-35-01
1
706258-05
1
615851-34-01
615847-34-01
615378-02
615622-02
615378-03
615378-04
49742-03
1
699333-03
699334-27
699335-27
699336-03
644856-04
699337-27
699338-27
49089-01
699343-01
614350-03
49416-03
2010341-03
46045-11
699344-01
701004
46037-17
49800-04
__
__
699333-11
699334-11-01
699335-11
699336-11
644856-11-00-01
699337-11
699338-11
49089-01
699343-01
614350-02
49416-02
2010341-11
46045-10
699344-01
663311-13
392002-09-00-70
49800-03
__
__
11" 10,000
psi
Qty
Part No.
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
8
8
5930-05-10
2
5930-05-10
2
46052-06
24
49477-01
4
11849
4
12185-03
4
12185-01
2
12185-02
700735
__
__
702514-25-20-08 4
700594
2
701960
49122-03
1
2010196-17
1
2010196-05
1
2010196-06
1
2010196-18
1
699345-02
1
700619
1
700618
1
615850-15-01
1
615850-14-01
1
615847-17-01
1
615851-16-01
1
615847-16-01
1
615851-17-01
1
615846-04-01
615846-03-01
1
615850-13-01
1
706258-02
1
__
1
__
1
__
__
__
__
49742-09
1
699333-04
699334-28
699335-28
699336-04
644856-05
699337-28
699338-28
49089-01
699343-01
614350-04
49416-04
2010341-07
46045-12
699344-01
663311-13
46037-19
49800-05
__
__
11" 15,000
psi
Qty
Part No.
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
12
12
5930-07-10
2
5930-05-10
2
46052-07
24
49477-01
4
11849
4
12185-03
4
12185-02
2
__
__
__
__
702514-25-20-08 4
700594
2
__
49122-04
1
2010196-19
1
2010196-07
1
2010196-08
1
2010196-20
1
699345-06
1
700812
1
700811
1
615850-40-01
1
615850-41-01
1
615847-38-01
1
615851-38-01
1
615847-39-01
1
615851-37-01
1
__
1
615846-27-01
615850-38-01
1
706258-03
1
615850-39-01
1
615846-28-01
1
__
1
__
1
__
1
__
1
49742-10
1
699333-38
699334-38
699335-38
699336-38
644800-38
699337-38
699338-38
49089-01
699343-01
614350-09
49416-09
2010341-13
46045-15
699344-02
663311-13
46037-26
49800-05
__
__
614271-03
5930-06-10
46052-10
46052-01
11849
12185-03
12185-02
__
__
__
__
702514-25-20-08
700594
__
49122-10
2010196-40
614246-49
614246-50
2010196-39
699345-10
706452
706451
615850-28-01
615850-27-01
615846-21-01
615850-25-01
615846-19-01
615850-26-01
615846-20-01
__
615850-29-01
46001-01-42
615850-28-01
615846-21-01
615378-01
615378-06
615378-06
615378-05
49742-14
13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers
Item
3
4
5
6
7
9
10
11
12
13
14
15
16
17
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
75
76
77
78
***
13-5/8"
5000 psi
Description
Piston
Inner Cylinder Head
Outer Cylinder Head`
Pusher Plate
Donut & Packer****
Lock Ring
Actuator Ring
Actuator Screw
Actuator Screw Bushing
Outer Cylinder Lock Segment
Lock Segment Retaining Ring
Support Plate
Top Trash Seal
Actuator Screw Bearing
Anchor Shackle
Inner Cylinder Stud
Inner Cylinder Nut
Stud
Nut
Lock Ring Access Port Plug
Hydraulic Port Plug
Pusher Plate Screw
Actuator Ring Stop Screw
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Stud
Nut
Bushing Retaining Screw
Oil Injection Fitting
Lifting Eye*
Support Plate Bearing Ring
Piston ID Bearing Ring
Inner Cyl. OD Bearing Ring
Outer Cyl. ID Bearing Ring
Piston OD Bearing Ring
Pusher Plate Bearing Ring
Outer Cyl. ID Wiper Ring
Inner Cyl. OD Wiper Ring
Inner Cylinder ID Lip Seal
Inner Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Piston ID Lip Seal
Piston OD Lip Seal
Outer Cylinder ID Lip Seal
Outer Cylinder OD Lip Seal
Outer Cylinder OD Lip Seal
Top ID Lip Seal
Top OD Lip Seal
Outer Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Inner Cyl. ID Backup Ring*
Inner Cyl. OD Backup Ring*
Outer Cyl. ID Backup Ring*
Top ID Backup Ring*
Complete Replacement Kit
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
2
2
24
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
13-5/8"
10,000 psi
Part No.
Qty Part No.
699333-05
1 699333-06
699334-05-02 1 699334-30
699335-05
1 699335-30
699336-05
1 699336-06
644856-06
1 644856-07
699337-05
1 699337-30
699338-05
1 699338-30
49089-01
4 49089-02
699343-01
4 699343-02
614350-05
3 614350-01
49416-05
1 49416-01
2010341-05
1 2010341-06
46045-01
1 46045-09
699344-01
8 699344-02
663311-13
4 663311-13
46037-19
12 46037-20
49800-05
12 49800-05
__
__
__
__
5930-07-10
2 5930-08-10
5930-05-10
2 5930-06-10
46052-08
24 46052-09
46052-01
4 46052-02
11849
4 11849
12185-03
4 700649
12185-02
2 12185-01
__
4 12185-03
__
2 700446
__
__
__
__
702514-2520-08
700594
__
49122-05
2010196-21
2010196-09
2010196-10
2010196-22
699345-01
700320
700581
615850-21-01
615850-20-01
615847-22-01
615851-23-01
615847-21-01
615851-24-01
615846-11-01
615846-10-01
615850-19-01
706258-07
__
__
__
__
__
__
49742-11
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
702514-2520-08
700594
__
49122-06
2010196-23
2010196-11
2010196-12
2010196-24
699345-03
700319
700320
615850-32-01
615850-33-01
615847-40-01
615850-30-01
615846-22-01
615850-31-01
615846-23-01
615846-24-01
615850-34-01
706258-10
615851-28-01
615846-25-01
__
__
__
__
49742-12
16-3/4"
3000 and 5000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
8
8
2
2
24
4
4
4
2
4
4
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
Part No.
699333-18
699334-18
699335-18
699336-18
644800-18
699337-18
699338-18
49089-02
699343-02
614350-07
49416-07
2010341-12
46045-08
699344-02
663311-13
46037-25
49800-06
__
__
614271-01
5930-06-10
46052-09
46052-02
11849
12185-02
12185-01
700446
__
__
__
702514-2520-08
700594
__
49122-08
2010196-30
2010196-25
2010196-26
2010196-42
699345-07
700994
700993
615850-44-01
615850-45-01
615846-27-01
615850-46-01
615846-29-01
615850-43-01
__
615846-29-01
615850-42-01
706258-09
__
__
__
__
__
__
49742-08
49
18-3/4"
5,000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
16
16
2
2
24
4
4
4
2
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
Part No.
699333-44
699334-44
699335-44
699336-44
644856-09
699337-44
699338-44
49089-04
699343-04
614350-13
49416-09
2010341-17
46045-18
699344-02
663311-13
46037-32
49800-07
__
__
614271-02
5930-06-10
46052-14
46052-02
11849
700649
12185-03
12185-02
__
__
__
702514-2520-08
700594
__
49122-11
2010196-51
2010196-49
2010196-50
2010196-52
699345-14
708000
708003
615850-04-01
615851-01-01
615846-05-01
615850-03-01
615846-01-01
615850-02-01
__
615846-02-01
615850-01-01
__
__
__
__
__
__
__
49742-16
18-3/4"
10,000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
16
16
2
2
24
4
4
4
2
4
4
2
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
Part No.
699333-21
699334-21
699335-21
699336-21
644856-01
699337-21
699338-21
49089-02
699343-02
614350-06
49416-06
615483-01
46045-16
699344-02
663311-13
46037-27
49800-07
__
__
614271-01
5930-06-10
46052-11
46052-02
11849
700649
12185-03
12185-02
__
__
__
702514-2520-08
700594
__
615482-01
2010196-29
2010196-47
2010196-28
2010196-30
699345-13
705710
705711
615851-02-01
615850-08-01
615846-16-01
615850-09-01
615846-15-01
615850-07-01
__
615846-14-01
615850-01-01
706258-12
__
__
__
__
__
615378-01
49742-17
20-3/4"
3000 psi**
Qty
1
1
1
1
1
1
4
16
16
20
20
2
24
4
2
2
36
36
1
1
1
1
1
1
1
1
1
1
1
2
1
21-1/4"
2000 psi**
Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__
Qty
1
1
1
1
1
2010341-18
1
__
__
663311-13
4
46037-34
12
49800-12
12
5919-08
24
2709000-18-09 24
5930-06-10
2
__
46052-15
24
46052-16
4
700649
2
12185-02
4
__
__
__
615447-01-10 24
2709000-19-09 24
__
__
__
49122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615850-12-01
615851-03-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
49742-18
1
1
1
1
1
1
1
1
1
1
1
2
1
Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__
2010341-18
__
__
663311-13
46037-34
49800-12
6306-16-10
2709000-15-09
5930-06-10
__
46052-15
46052-16
700649
12185-02
__
__
__
615447-02-10
2709000-19-09
__
__
__
49122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615851-03-01
615850-12-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
49742-18
For popular size D and DL BOPs, a BOP replacement part kit is available to
provide all seals, bearings and scrapers required during normal maintenance.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and
are less expensive than individual parts. All parts in each kit are identified with
part numbers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal
is available for service in annular BOPs that have pitted, corroded or oversized
seal grooves. To enhance the performance life of the used annular BOP, this seal
16
17
Replacement Kit
49742-01
7-1/16"
10,000
49742-02
__
7-1/16"
15,000
49742-13
__
7-1/16"
20,000
49742-03
__
11"
3000,5000
49742-09
__
11"
10,000
49742-10
__
11"
15,000
49742-14
__
13-5/8"
5000
49742-11
2010006-01
13-5/8"
10,000
49742-12
16-3/4"
3000,5000
49742-08
2010006-05
__
18-3/4"
5000
49742-16
2010006-04
18-3/4"
10,000
49742-17
20-3/4"
3000
49742-18
2010006-03
__
21-1/4"
2000
49742-19
__
67
66
55
50
57
Quantity
1
8
1
1
1
1
1
1
1
1
1
1
2
1
1
63
64
2
1
Seal Ring
Seal Ring
65
66
67
1
1
2
Seal Ring
Seal Ring
Seal Ring
52
Description
Top Trash Seal
Actuator Screw Bearing
Inner Cylinder Head Ring
Bearing
Bearing
Bearing
Bearing
Wear Ring
Wiper Ring
Wiper Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring
60
58
59
53
56
64
63
65
51
61
54
62
SD-5306
D BOP
*Item numbers are standard bill of material numbers for a complete assembly.
Higher Temperatures
For temperatures greater than 250F and high H2S levels, CAMULAR severe
service elastomer is recommended. The D BOP packing element comes only as
a complete subassembly, which includes packer and donut Contact your local
Cameron representative for details. CAMULAR part numbers are listed on
pages 48-49.
Packer
Donut
SD-5306
The Cameron S/QRC and G-2 snubbing blowout preventers are used in well
workover and servicing operations. S/QRCs are ram-type preventers which
maintain pressure control for all types of workover wells. The Cameron G-2 BOP
is suitable for wells requiring a 4-1/16" 5000 or 10,000 psi or 7-1/16" 5000 psi
snubbing preventer.
SD-10821
SD-10822
51
SD-5169-3
SD-5169-2
Safety Packer
SD-5169-4
Safety Packer*
Ram Assembly**
Safety
Packer**
Pipe
Ram Body**
Top
Seal**
Wear Insert
Packer Subassembly**
__
Wear Insert
Packer**
__
Wear Insert
Subassembly**
__
Slip Insert
Subassembly**
__
Blind
46955-01
46941-01
46938
46950
1.050"
46955-02
46941-04
46940-03
46950
614267-01
614262-01
614259-01
614442-01
1.315"
46955-03
46941-03
46940-02
46950
614267-02
614262-02
614259-02
614442-02
1.660"
46955-04
46941-02
46940-01
46950
614267-03
614262-03
614259-03
614442-03
1.900"
46955-05
46942-01
46940-04
46950
614267-04
614262-04
614259-04
614442-04
2.000"
46955-06
46942-02
46940-05
46950
614267-05
614262-05
614259-05
614442-05
2.062"
46955-07
46942-03
46940-06
46950
614267-06
614262-06
614259-06
614442-06
614267-07
__
614262-07
__
614259-07
__
614442-08
2.375"
46955-08
46942-04
46939-01
46950
2.875"
46955-09
46942-05
46939-02
46950
614442-07
Shear Blade
Upper Ram Body
Lower Ram Body
Bolt
SD-5219
Blade Retainer
Shear Ram
BOP BOP
Description
Description
Shear Blade
Blade Retainer
Bolts
Qty
Part Number
Qty
Part Number
614411-01
614402-02
614402-01
614413-01
614414-01
4 702585-14-00-24
614411-01
614402-02
614402-01
614413-01
614414-01
4 702585-14-00-24
644254-01
644253-01
644253-02
644252-01
644252-01
701683
Top Seal
Wireline Guide
Upper Ram Body
SD-10819
Wireline Packer
Lower Ram Body
Screw**
Wireline Ram
Wireline
Size
(In.)
Wireline Ram
Assembly*
(1 Required)
Upper Ram
Body
(1 Required)
Lower Ram
Body
(1 Required)
Top
Seal
(2 Required)
Wireline
Packer
(2 Required)
Wireline
Guide
(2 Required)
0-0.250
614263-06
614236-01
614235-01
46950
46941-10
614264-01
0.312
614263-01
614236-01
614235-01
46950
46941-05
614264-01
0.438
614263-02
614236-02
614235-02
46950
46941-06
614264-02
0.562
614263-03
614236-03
614235-03
46950
46941-07
614264-03
0.750
614263-04
614236-04
614235-04
46950
46941-08
614264-04
0.875
614263-05
614236-05
614235-05
46950
46941-09
614264-05
52
Clamp Connections
Bearing Ring
Load Ring
SD-7039
Nut
Seal
Ring
Number
RX
20
20
__
23
23
23
__
24
24
24
__
27
27
27
__
35
35
__
__
45
45
__
45
__
45
__
__
49
49
53
53
__
__
57
57
57
__
65
65
__
__
__
__
__
73
73
73
__
__
__
__
__
__
__
BX
151
151
151
152
152
152
152
153
153
153
153
154
154
154
154
155
155
155
155
__
__
156
__
156
__
156
156
157
157
__
158
158
158
__
160
159
159
__
__
161
162
164
164
164
__
__
__
165
166
166
__
__
__
__
AX
__
__
__
__
__
__
__
__
__
__
__
41700-27
__
41700-25
__
__
41700-24
__
__
__
41700-02
__
__
__
__
__
__
__
__
41700-06
__
41700-08
__
CX
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
41700-11
41700-13
41700-15 13
__
13
41700-17 __
__
__
41700-19 __
__
__
__
18
__
18
__
18
__
__
__
__
__
__
__
21
__
21
__
21
__
__
__
__
__
__
__
__
Clamp
Assembly
Part No.
Clamp
Part No.
644021
(2 Reqd)
Bolt
Part No.
(4 Reqd)
615236-01
615236-02
615236-03
615236-01
615236-02
615236-03
615236-03
615236-02
615236-04
615236-03
615236-06
615236-04
615236-05
615236-06
615236-08
615236-05
615236-06
615236-08
615236-10
615236-25
615236-07
615236-08
615236-08
615236-10
615236-10
615236-22
615236-15
615236-08
615236-10
615236-09
615236-10
615236-22
615236-15
615236-11
615236-13
614925-03
614925-03
615236-12
615236-14
615236-19
615236-28
645490-01
645490-01
645490-01
615236-18
615236-18
615236-18
614925-02
614925-02
614925-02
615236-21
615236-20
615236-24
615236-23
()-01
()-02
()-03
()-01
()-02
()-03
()-03
()-02
()-04
()-03
()-06
()-04
()-05
()-06
()-08
()-05
()-06
()-08
()-10
()-25
()-07
()-08
()-08
()-10
()-10
()-22
()-15
()-08
()-10
()-09
()-10
()-22
()-15
()-11
()-13
()-15
()-28
()-12
()-14
()-19
()-28
()-27
()-26
()-32
()-18
()-18
()-18
()-27
()-26
()-26
()-21
()-20
()-24
()-23
5912-60-10
702533-08-10-80
702533-09-10-90
5912-60-10
702533-08-10-80
702533-09-10-90
702533-09-10-90
702533-08-10-80
702533-09-10-82
702533-09-10-90
709949
702533-09-10-82
702533-09-10-82
709949
702533-13-11-32
702533-09-10-82
702533-10-10-93
702533-13-11-32
702533-14-11-61
702533-08-10-82
702533-12-11-20
702533-13-11-32
702533-13-11-32
702533-14-11-61
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-13-11-32
702533-14-11-61
702533-12-11-30
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-12-11-50
702533-19-12
702533-21-11-91
702533-25-12-60
702533-12-11-50
702533-14-11-81
702533-21-12-32
702533-25-12-60
707902
709446
644970-01-00-01
702533-19-12-00
702533-19-12-00
702533-19-12-00
707902
709446
709446
702533-11-11-50
702533-13-11-70
702533-14-11-80
702533-19-12-12
53
Nut
Part No.
(8 Reqd)
2709000-09-01
2709000-09-01
2709000-10-01
2709000-09-01
2709000-09-01
2709000-10-01
2709000-10-01
2709000-09-01
2709000-10-01
2709000-10-01
12955-53-10
2709000-10-01
2709000-10-01
12955-53-10
2709000-14-01
2709000-10-01
12955-53-10
2709000-14-01
2709000-15-01
2709000-09-01
2709000-13-01
2709000-14-01
2709000-14-01
2709000-15-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-14-01
2709000-15-01
2709000-13-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-13-01
2709000-19-01
2709000-20-01
49800-11
2709000-13-01
2709000-15-01
2709000-20-01
49800-11
713034
644076-01
645015-01
2709000-19-01
2709000-19-01
2709000-19-01
713034
644076-01
644076-01
2709000-12-01
2709000-14-01
2709000-15-01
2709000-19-01
Load Ring
Part No.
(8 Reqd)
697491-05
697491-05
697491-06
697491-05
697491-05
697491-06
697491-06
697491-05
697491-06
697491-06
697491-07
697491-06
697491-06
697491-07
697491-10
697491-06
697491-07
697491-10
697491-11
697491-05
697491-09
697491-10
697491-10
697491-11
697491-11
697491-12
697491-04
697491-10
697491-11
697491-09
697491-11
697491-12
697491-04
697491-09
697491-12
697491-04
697491-01
697491-09
697491-11
697491-04
697491-01
697491-03
697491-02
697491-14*
697491-12
697491-12
697491-12
697491-03
697491-02
697491-02
697491-08
697491-10
697491-11
697491-12
Bearing Ring
Part No.
(8 Reqd)
697492-05
697492-05
697492-06
697492-05
697492-05
697492-06
697492-06
697492-05
697492-06
697492-06
697492-07
697492-06
697492-06
697492-07
697492-10
697492-06
697492-07
697492-10
697492-11
697492-05
697492-09
697492-10
697492-10
697492-11
697492-11
697492-12
697492-04
697492-10
697492-11
697492-09
697492-11
697492-12
697492-04
697492-09
697492-12
697492-04
697492-01
697492-09
697492-11
697492-04
697492-01
697492-03
697492-02
697492-14*
697492-12
697492-12
697492-12
697492-03
697492-02
697492-02
697492-08
697492-10
697492-11
697492-12
Safety Hoist
2
Reqd
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
4** or
6*** Reqd
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
708153***
__
__
__
__
708153***
708153***
708152 708153**
708152 708153**
__
__
__
708153***
__
708153***
__
708153***
708152 708153**
708152 708153**
__
708153***
708152 708153**
708152 708153**
__
708152***
__
708153***
__
708153***
708152 708153**
__
708152***
__
708152***
__
708152***
__
708152***
708152 708153**
708152 708153**
708152 708153**
__
708152***
__
708152***
__
708152***
__
708153***
__
708152***
__
708152***
__
708152***
Cameron
Wrench
Part No.
713114-01
713114-01
713114-04
713114-01
713114-01
713114-04
713114-04
713114-01
713114-04
713114-04
713114-05
713114-04
713114-04
713114-05
713114-08
713114-04
713114-05
713114-08
713114-09
713114-01
713114-07
713114-08
713114-08
713114-09
713114-09
713114-13
713114-14
713114-08
713114-09
713114-07
713114-09
713114-13
713114-14
713114-07
713114-13
713114-14
__
713114-07
713114-09
713114-14
__
__
__
__
713114-13
713114-13
713114-13
__
__
__
713114-06
713114-08
713114-09
713114-13
Cameron
4341 S.W. 33rd Street
Oklahoma City, Oklahoma
73119
Tel: (405) 682-1661
Fax: (405) 682-1051
Germany
Cameron GmbH
P.O. Box 3225
29232 Celle, Germany
Tel: 011+49+5141+8060
Fax: 011+49+5141+806333
Ireland
Cameron Ireland Limited
Aghafad, Longford
Republic of Ireland
Tel: 011+353+43+45301
Fax: 011+353+43+41560
Cameron Elastomer
Technology
29501 Katy Freeway
Katy, Texas 77450
Tel: (281) 391-4600
Fax: (281) 391-4640
Nigeria
Cooper Cameron Corp.
Nigeria
Plot 45 Trans Amadi Ind.
Layout
P.M.B. 995
Port Harcourt, Nigeria
Tel: 011+234+84+331264
Fax: 011+2341-2694003
Cameron
P.O. Box 10286
Highway 90 @ FM 1909
Liberty, Texas 77575
Tel: (409) 336-8811
Fax: (409) 336-2822
EASTERN HEMISPHERE
Austria
Canada Works
Dorenkampgasse 3
P.O. B. 24
A-1107 Vienna, Austria
Tel: 011+43+1+682-131
Fax: 011+43+1+682-133;
England
Cooper Cameron (U.K.) Ltd.
Queen Street, Stourton
Leeds, West Yorkshire
LS10 1SB England
Tel: 011+44+113+2701144
Fax: 011+44+113+7276778
Norway
Cameron Norway A/S
P.O. Box 66
5364 Agotnes
Bergen, Norway
Tel: 011+47+55+334710
Fax: 011+47+5+334593
France
Cameron France, S.A.
Plaine Saint-Pierre
CS 620
34535 Beziers Cedex,
Beziers, France
Tel: 011+33+67+111500
Fax: 011+33+67+111600
Gabon
Cameron Gabon S.A.
B.P. No. 869
Port Gentil
Republique Gabonaise
Tel: 011+241+553026
Fax: 011+241+555897
54
The Netherlands
Cameron B.V.
P.O. Box 121, 9600 AC
Produktieweg 14, 9601 MA
Hoogezand, The Netherlands
Tel: 011+31+598+396200
Fax: 011+31+598+396298
ASIA PACIFIC/MIDDLE
EAST
Australia
Cameron Australia Pty. Ltd.
P.O. Box 519
Cheltenham 3192
Melbourne, Victoria, Australia
Tel: 011+61+39+584-3100
Fax: 011+61+39+584-6658
Cameron Australia Pty. Ltd.
P.O. Box 1475
Canning Vale 6155
Perth Western Australia 6155
Tel: 011+61+9+455-3655
Fax: 011+61+9+455-3636
Singapore
Cameron (Singapore) Pte. Ltd.
No. 2 Gul Circle
Jurong Industrial Estate
Locked Bag Service No. 3
Jurong Town Post Office
Singapore 2262
Republic of Singapore
Tel: 011+65+861-335
Fax: 011+65+861-6197
Sales Offices
WESTERN HEMISPHERE
Canada
Cooper Cameron Corporation
Cooper Cameron Ltd.
600, 715 - 5th Avenue S.W.
Calgary, Alberta T2P 2X6
Canada
Tel: (403) 261-2800
Fax: (403) 262-5181
Cooper Cameron Corporation
Cooper Cameron Ltd.
8614 112 Street
Grande Prairie,
Alberta T8V 5X4
Canada
Tel: (403) 539-2333
Fax: (403) 539-2334
Mexico
Cooper Cameron de Mexico,
S.A. de C.V.
Calle 37 No. 147-A
Col. Hector Perez Martinez
24100 Ciudad Del Carmen
Camp Mexico
Tel: 011+ 52+938-27924
Fax: 011+ 52+938-27924
Cooper Cameron de Mexico,
S.A. de C.V.
Avenida Homero 1804,
Ste 403
Co. Chapultec Morales
11510 Mexico D.F.
Tel: 011+52+5+5800296
Fax: 011+52+5+395-8869
Cooper Cameron de Mexico,
S.A. de C.V.
Paseo Villahermosa 701-37
Seccion Lomas
Fracc. Plaza Villahermosa
86179 Villahermosa,
Tabasco Mexico
Tel: 011+52+93-513484
Fax: 011+52+93-513484
South America
Cameron Argentina
Cerrito 1070, Piso 2
1010 Buenos Aires, Argentina
Tel: 011+54+811+4000
Fax: 011+54+811+4009
Cameron
Balfer Ltd.
Zona Franca
P.O. Box 117-D
Punta Arenas, Chile
Tel: 011+56+61+213931
Fax: 011+56+61+214379
Cameron
P.O. Box 114
Mt. Pleasant, Michigan 48858
Tel: (517) 772-5555
Fax: (517) 773-2842
Cameron
1020 Hillcrest Drive
Laurel, Mississippi 39440
Tel: (601) 649-8900
Fax: (601) 649-8909
Cameron
5729 Leopard Street, Bldg. 9
Corpus Christi, Texas 78408
Tel: (512) 289-1455
Fax: (512) 289-6251
Cameron
1505 Elm Street, Suite 950
Dallas, Texas 75201
Tel: (214) 855-7823
Fax: (214) 855-0033
United States
Cameron
P.O. Box 3545
Bakersfield, California 93385
Tel: (805) 323-8297/8183
Fax: (805) 323-8595
Cameron
P.O. Box 1212
Houston, Texas 77251-1212
Tel: (713) 939-2211
Fax: (713) 939-2620
Cameron
1238 Alice Street, A
Woodland, California 95695
Tel: (916) 666-4144
Fax: (916) 666-5916
Cameron
1700 Broadway, Suite 1400
Denver, Colorado 80290-1401
Tel: (303) 861-1850
Fax: (303) 837-0408
Cameron
201 Energy Center Parkway,
Suite 402
Lafayette, Louisiana 70508
Tel: (318) 235-0051
Fax: (318) 233-8659 (sales)
(318) 981-3322 (service)
Cameron
650 Poydras St.
Poydras Center, Suite 2310
New Orleans, Louisiana 70130
Tel: (504) 529-7634
Fax: (504) 522-8837
55
Cameron
P.O. Box 1311
Longview, Texas 75606
Tel: (903) 236-4884
Fax: (903) 234-0336
Cameron
415 W. Wall, Suite 102
Midland, Texas 79702
Tel: (915) 682-4688
Fax: (915) 682-4692
Cameron
270 So. Grandview
Odessa, Texas 79761
Tel: (915) 337-5475
Fax: (915) 337-3001
Cameron
P.O. Box 2229
Mills, Wyoming 82644
Tel: (307) 472-0222
Fax: (307) 265-1318
Cameron
P.O. Box 901
Evanston, Wyoming
82931-0901
Tel: (307) 789-2665
Fax: (307) 789-4734
Cameron
240 Industrial Boulevard
Rock Springs, Wyoming 82901
Tel: (307) 382-3134
Fax: (307) 382-3190
Cameron
P.O. Box 1463
1336 East 335 South
Vernal Utah 84078
Tel: (8091) 789-1778
Fax: (801) 789-1739
EASTERN HEMISPHERE
Congo
Cameron France
Antenne de Point-Noire
B.P. 5491 Cote Sauvage
Pointe-Noire Congo
Tel: 011+242+945563
Fax: 011+242 +940283
Egypt
Cameron
Villa El Baraka
No. 8 Road 279
New Maadi
Cairo, Egypt ARE
Tel: 011+202+352-0193
Fax: 011+202+352-0495
England
Cooper Cameron (U.K.) Ltd.
Unit 11, Brinell Way
Harfreys Industrial Estate
Great Yarmouth, Norfolk
NR31 OLU England
Tel: 011+44+1493+440438
Fax: 011+44+493+655405
Ingram Cactus Ltd.
Shuttleworth Close
Gapton Hall Industrial Estate
Great Yarmouth
Norfolk NR31 ONQ England
Tel: 011+44+1493+440444
Fax: 011+44+493+440254
Sales Offices
Cooper Cameron (U.K.) Ltd.
205 Holland Park Avenue
London W11 4XB England
Tel: 011+44+171+602-0888
Fax: 011+44+171+602-7228
Ingram Cactus Ltd.
Plexzus House
1 Cromwell Place
London SW72JE England
Tel: 011+44+171+225-2281
Fax: 011+44+171+225-2181
France
Cameron France, S.A.
19 bis, Blvd. dArgenson
92200 Neuilly-Sur-Seine
Paris, France
Tel: 011+33+1+4643-9200
Fax: 011+33+1+4643-9202
Cameron France, S.A.
15, Ave du General De Gaulle
64000 Pau, France
Tel: 011+33+59+807640
Fax: 011+33+59+807649
Gabon
Cameron Gabon S.A.
B.P. No. 869
Port Gentil
Republique Gabonaise
Tel: 011+241+553026
Fax: 011+241+555897
Nigeria
Cooper Cameron Corp.
Nigeria
18B Thompson Avenue
Ikoyi
Lagos, Nigeria
Tel: 011+2341-2694003
Fax: 011+2341-2694003
Russia
Cooper Cameron Corporation
Per. Sadovskikh, 4
Apt. 12
Moscow 103001, Russia
Tel: 011+7+502+221-3422
Fax: 011+7+502+221-3010
Scotland
Ingram Cactus Ltd.
Wellheads Crescent
Dyce Industrial Park
Dyce AB2 OGA
Aberdeen, Scotland
Tel: 011+44+1224+724226
Fax: 011+44+1224+7242
Malaysia
Cameron Excel Sdn Bhd
Warehouse 11
Kemaman Supply Base
24007 Kemaman
Terengganu, Malaysia
Tel: 011+60+9+86311198
Fax: 011+60+9+8631196
Qatar
Cameron
c/o AlAhed Trading and
Construction Co. Ltd.
P.P. Box 3266
Doha, Qatar
Tel: 011+974+410797
Fax: 011+974+411582
The Netherlands
Cameron B.V.
Sweelinckplein 11
2517 GK
The Hague, The Netherlands
Tel: 011+31+70+365-7904
Fax: 011+31+70+364-5941
Saudi Arabia
Cameron
c/o Al Rushaid Trading Co.
P.O. Box 540
Dhahran Airport 31932
Al Khobar
Saudi Arabia
Tel: 011+966+3+898-0028
Fax: 011+966+3+894-6426
ASIA PACIFIC
Indonesia
Cameron (Singapore) Pte. Ltd.
c/o P.T. Imeco
Jalan Ampera Raya No. 9 & 10
Cilandak Timur
Jakarta #12550 Indonesia
Tel: 011+62+21+780-8090
Fax: 011+62+21+780-8064
Japan
Cameron/CCV
Fuundo Annex Bldg., 3rd Floor
4-2, Kanda Ogawa-Machi
1-Chome Chiyoda-Ku
Tokyo 101 Japan
Tel: 011+81+3+3252-8434
Fax: 011+81++3+32525438
New Zealand
Cameron
P.O. Box 672
Papakura, New Zealand
Tel: 011+64+9+299-8103
Fax: 011+64+9+299-8103
MIDDLE EAST
Brunei
Cameron Sdn. Bhjd.
c/o Syarikat Rajah Sdn Bhd
P.O. Box 177
Kuala Belait 6001
Negara Brunei Darussalam
Tel: 011+673+3+222613
Fax: 011+673+3+224284
56
UAE
Cameron
P.O. Box 3555
Abu Dhabi, U.A.E.
Tel: 011+971+2+541313
Fax: 011+971+2+541441
Ingram Cactus Ltd.
P.Ol. Box 43966
Abu Dhabi, U.A.E.
Tel: 011+971+2+723648
Fax: 011+971+2+782293
3. TAXES:
its option and its own expense, to answer such claim or threat of suit, assume the control of the defense of said
suit, and settle or compromise same in any way Seller sees fit. Other than court-awarded judgments as aforesaid
Seller shall not be liable for any delays, loss of use or for other direct, indirect, incidental or consequential damages
incurred by reason of any such judgment. Seller does not warrant that such material or apparatus (a) will not
infringe any such patent when not manufactured by or for Seller or when specially made in whole or in part to the
Buyers design specification and such infringement arises from the inclusion of such specified design or (b), if used
or sold in combination with other material or apparatus, or if used in the practice of a process, will not, as a result
of such combination or use, infringe any patent covering such combination or process; and Seller shall not be liable
for and does not indemnify Buyer for damages or losses of any nature whatsoever resulting from actual or alleged
patent infringement arising pursuant to (a) or (b) above.
Any tax or other charge imposed by law on the sale or production of goods or the performance of services shall
be paid by the Buyer, unless the law specifically provides that such payment must be made by Seller, in which case
Buyer shall reimburse Seller for such payment as part of the purchase price. Custom duties, consular fees, insurance charges and other comparable charges will be borne by Buyer.
14. INSPECTION:
Shipment schedules are given as accurately as conditions permit and every effort will be made to make shipments
as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor for any losses or damages to Buyer (or any third party) occasioned by deviations in the shipping schedule, whether due to Acts of God,
orders bearing priority ratings established pursuant to law, differences with workmen, local labor shortages, fire,
flood, shortages or failure of raw materials, supplies, fuel, power or transportation, breakdown of equipment or
any other causes beyond Sellers reasonable control, whether of similar or dissimilar nature than those enumerated. Seller shall have additional time within which to perform as may be reasonably necessary under the circumstances and shall have the right to apportion its production among its customers in such a manner as it may consider to be equitable. Seller reserves the right to furnish commercially equivalent or better substitutes for materials
or to subcontract the Buyers order or portions thereof as Seller deems necessary. In no event shall Seller be liable
for any consequential damages for labor resulting from failure or delay in shipment. If Buyer requires drawings, procedures, standards or similar material for approval, shipping schedules will be calculated from the time such
approvals are received by Seller, since shipping schedules are based on Seller having all required information and a
firm order from Buyer which is enterable into production. Any hold points, witness points or the need for inspection by Buyers representatives must be identified by Buyer at the time of quotation (if any) and/or order placement
in order that the effect on the prices or shipping schedules (if any) can be taken into account. Additional inspection or testing required by Buyer which affects normal production sequence will be considered as extending the
shipping dates accordingly.
Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Sellers plant or
other shipping or receiving point designated by Seller and shall be conclusive except as regards latent defects.
Buyers representatives may inspect at the Sellers plant or shipping point during working hours prior to shipment
in such manner as will not interfere with operations.
5. MINIMUM BILLING:
Seller reserves the right to impose a minimum billing charge on all sales, change orders or order supplements.
6. TERMS OF PAYMENT:
Terms of payment for all materials and service are 30 days from invoice date, at net price, provided satisfactory
credit has been established. All unpaid invoices are subject to the maximum legal interest rate per annum commencing with the due date.
8. WARRANTIES:
All products of Sellers manufacture are warranted against defects of material and workmanship for a period of
twelve (12) months from the date of installation or eighteen (18) months from date of shipment, whichever period first expires, when such products are used in the service and within the pressure range for which they were
manufactured. In the case of products or parts not wholly of Sellers manufacture, Sellers liability shall be limited
to the extent of its recovery from the manufacturer of such products or parts under its liability to Seller.
Any repair work performed by Seller is warranted for one year from completion of such repairs and applies only
to work performed.
If, within these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance
of any product or repair and if in the Sellers sole judgment the product or repair does not conform or is found to
be defective in material or workmanship, then, Buyer shall, at Sellers request, return the part or product F.O.B. to
Sellers designated plant or service location. Seller, at its option and expense, shall repair or replace the defective
part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or product. Any repayment of purchase price shall be without interest.
Sellers warranty liability, including defects caused by Sellers negligence, shall be limited to such repair, replacement or refund, and shall not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indirect, incidental or consequential damages of any kind. Seller will not be responsible for failures of products which
have been in any way tampered with or altered by anyone other than an authorized representative of Seller, failures due to lack of compliance with recommended maintenance procedures or products which have been repaired
or altered in such a way (in Seller s judgment) as to affect the products adversely. THIS WARRANTY IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE WHICH EXCEED THE FOREGOING WARRANTY.
9. NUCLEAR SALES:
The products sold hereunder are not designed or manufactured for use in or with any atomic installation or activity. If the Buyer or ultimate user of these products intends to use them in such an installation or activity, Sellers
Nuclear Terms of Sale shall be part of and control this contract. Seller will furnish Buyer with a copy of its Nuclear
Terms of Sale upon request.
CAM/T&C/US/96
REV. 2/96
Seller hereby certifies that these products were produced in accordance with all applicable requirements of Section
6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States
Department of Labor issued under Section 14 thereof.
15. TITLE:
Title to the products sold hereunder passes to Buyer upon payment of the full purchase price.
CAM-523-F
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Cooper Cameron Corporation Cameron Division Printed in USA 12/96 TG7.5M TC1001 WR4393