Sunteți pe pagina 1din 1

EIGRP Basic Configuration

Objectives:
Configure EIGRP for the shown network using EIGRP AS 90. Corporate policy dictates that you must use specific wildcard masks on R2 and R3. In addition, EIGRP should be configured in such a way that it does not operate like a classful routing protocol. Finally, the BB router has a static route to 192.168.1.0/24; R2 and R3 should receive this route via EIGRP without using redistribution. R2 and R3 should have a default route pointing to the 192.168.1.0/24 network at the corporate office. No static routes can be used to accomplish this. In order to meet security standards, EIGRP should not form neighbor relationships on any interface where other EIGRP routers do not exist. To improve the efficiency of the remote routers R2 and R3, the corporate BB router should summarize 172.30.0.0 172.30.7.255 into a single network advertisement. To best utilize available network bandwidth, the corporate BB router should perform unequal load balancing to reach the 10.1.2.0/24 network.

S-ar putea să vă placă și