Documente Academic
Documente Profesional
Documente Cultură
Chassis : Midas DVD-V5600/ XAX, XAP, XAO, GEN, RCL, STR DVD-V6600/ XAX, XAP, XAO, GEN, RCL, STR
SERVICE
DVD-VCR COMBINATION
Manual
Main Features
ELECTRONICS
The One Unit Solution Digital Theater System Digital Photo (JPEG) Viewer Advanced GUI 4 Head Hi-Fi Stereo DVD-V5600 Multi Language Menu Screen Various User Convenience Function DivX Playback DVD-V6600
This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable international and/or domestic law.
CONTENTS
1. Precautions
1-1 1-2 1-3 1-4 1-5 Safety Precaution Servicing Precautions ESD Precautions Handling the optical pick-up Pick-up disassembly and reassembly
1-1 ~ 1-6
(1-1) (1-3) (1-4) (1-5) (1-6)
2. Product Specification
2-1 Product Specification 2-2 Chassis Product Specification 2-3 Option Product Specification
2-1 ~ 2-4
(2-1) (2-2) (2-3)
3-1 ~ 3-14
(3-1) (3-4) (3-7)
4-1 ~ 4-26
(4-1) (4-3) (4-4) (4-7) (4-21) (4-22)
CONTENTS
7. Electrical Parts List 8. Block Diagram
8-1 8-2 8-3 8-4 8-5 All Block Diagram U5 (Motor Driver IC) Block Diagram U4 (SDRAM) Block Diagram U1 (Flash Memory) Block Diagram U3 (Decoder IC) Block Diagram
11-1 ~ 11-12
(11-3) (11-4) (11-5) (11-6) (11-7) (11-8) (11-9) (11-10) (11-11) (11-12)
CONTENTS
12. Operating Instructions 13. Circuit Operating Descriptions
13-1 S.M.P.S. 13-2 VCR System Control 13-3 VCR Servo 13-4 VCR Video 13-5 Hi-Fi Audio 13-6 Linear Audio 13-7 TM 13-8 OSD 13-9 Input-Output 13-10 DVD System Control 13-11 RF 13-12 Servo 13-13 DVD Data Processor 13-14 Video 13-15 Audio
14-1 ~ 14-34
(14-1) (14-1) (14-2) (14-4) (14-9) (14-10) (14-26) (14-28)
ASSEMBLY POINT
HOW TO EJECT THE CASSETTE TAPE (If the tape is stuck in the unit)
1) Turn the Gear Worm clockwise in the direction of arrow with a screwdriver. (See Fig. 2) (Other method ; Remove the screw of Motor Load Assy, Separate the Motor Load Assy) 2) When Slider S, T approachs the unloading position, rotate holder Clutch counterclockwise after inserting screwdriver in the frames bottom hole in order to wind the unwound tape. (Refer to Fig. 3) (If you rotate Gear Worm continuously when tape is unwinding, you may cause tape contamination by grease and tape damage. Be sure to wind the unwound tape with the unit in the horizontall position.) 3) Rotate Gear Worm clockwise using a screwdriver until the mecha is in the eject state. Remove the tape. (Refer to Fig. 2)
FRAME
GEAR WORM
Fig. 2
Fig. 3
1. Precautions
1-1 Safety Precautions
1) Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items: (1) Be sure that no built-in protective devices are defective or have been defeated during servicing. (1)Protective shields are provided to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2)When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including, but not limited to, nonmetallic control knobs, insulating fish papers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning. (2) Be sure that there are no cabinet openings through which adults or children might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, excessively wide cabinet ventilation slots, and an improperly fitted and/or incorrectly secured cabinet back cover. (3) Leakage Current Hot Check-With the instrument completely reassembled, plug the AC line cord directly into a 120V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1270 (40.7). With the instruments AC switch first in the ON position and then in the OFF position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinets, screwheads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5mA. Reverse the instrument power cord plug in the outlet and repeat the test. See Fig. 1-1. Any measurements not within the limits specified herein indicate a potential shock hazard that must be eliminated before returning the instrument to the customer.
(READING SHOULD NOT BE ABOVE 0.5mA) DEVICE UNDER TEST TEST ALL EXPOSED METER SURFACES 2-WIRE CORD ALSO TEST WITH PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED) EARTH GROUND
LEAKAGE CURRENT TESTER
ohm
ohmmeter
Precautions
2) Read and comply with all caution and safety related notes on or inside the cabinet, or on the chassis. 3) Design Alteration Warning-Do not alter or add to the mechanical or electrical design of this instrument. Design alterations and additions, including but not limited to, circuit modifications and the addition of items such as auxiliary audio output connections, might alter the safety characteristics of this instrument and create a hazard to the user. Any design alterations or additions will make you, the servicer, responsible for personal injury or property damage resulting therefrom. 4) Observe original lead dress. Take extra care to assure correct lead dress in the following areas: (1) near sharp edges, (2) near thermally hot parts (be sure that leads and components do not touch thermally hot parts), (3) the AC supply, (4) high voltage, and (5) antenna wiring. Always inspect in all areas for pinched, out-of-place, or frayed wiring, Do not change spacing between a component and the printed-circuit board. Check the AC power cord for damage.
5) Components, parts, and/or wiring that appear to have overheated or that are otherwise damaged should be replaced with components, parts and/ or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard. 6) Product Safety Notice-Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by shading, an ( )or a ( )on schematics and parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire and/or other hazards. Product safety is under review continuously and new instructions are issued whenever appropriate.
1-2
Samsung Electronics
Precautions
Samsung Electronics
1-3
Precautions
1-4
Samsung Electronics
Precautions
1M
1M
CONDUCTIVE SHEET
Fig.1-3
(6) Short the short terminal on the PCB, which is inside the Pick-Up ASSY, before replacing the PickUp. (The short terminal is shorted when the PickUp Assy is being lifted or moved.) (7) After replacing the Pick-up, open the short terminal on the PCB.
Samsung Electronics
1-5
Precautions
1-5-2 Assembly
1) Replace the Pick-up. 2) Remove the soldering 2 points on Pick-up. 3) Reassemble the Deck-Assy.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
PICK-UP ASS'Y
Fig. 1-4
1-6
Samsung Electronics
2. Product Specification
2-1 Product Specification
AUDIO Inputs VIDEO RF AUDIO AUDIO (DVD only) Outputs VIDEO VIDEO (DVD only) RF VIDEO SYSTEM AUDIO TRACK VCR PLAY/RECORD FF/REW TIME HEADS Stereo audio inputs, RCA Connector, -8dbm, 47K, front and rear Composite video inputs, RCA Connector, 75, 1Vp-p Antenna or CATV Input, F-Connector, 75 Stereo audio outputs, RCA Connector, -8dbm, 1.5K Digital audio output (1coaxial and 1 optical)) Pair Stereo audio outputs Composite video output, RCA Connector, 75, 1Vp-p S-Video output, S-Connector, 75, Y=1.0Vp-p, C=0.286Vp-p Component video output, 75, Y=1.0Vp-p, Pb=0.7Vp-p, Pr=0.7Vp-p Channel 3 or 4 1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance;chrominance: converted sub system phase shift Normal: 1 track; Hi-Fi: 2 track T-180 tape: SP 3 hours, SLP 9 hours T-120 tape: <2 minutes Video: DA 4 rotary Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear) Control: 1 stationary head Erase: 1 full track, 1 audio track WOW & FLUTTER FREQ. RESPONSE DISC COMPATIBILITY DVD FREQ. RESPONSE S/N RATIO DYNAMIC RANGE THD POWER REQUIREMENT System ENVIRONMENT WEIGHT Less than 0.005% (Hi-Fi) 20-20,000 Hz (Hi-Fi) CD, CD-R, CD-RW DVD-Video, CD-Digital Audio (5and 3.5) 96/48 kHz Sampling: 4 Hz-22kHz 110 dB 96 dB 0.003 % 120V AC, 60 Hz, 25 watts 41-104F (5-40C); 10%-75% humidity 13.8 lbs.
Samsung Electronics
2-1
Product Specification
Difference between '06 year product and existing '05 year product
SAMSUNG '06 year MIDAS NTSC Combo(DVD-V5600/V6600) have same features in '05 year product operation. But use Different outlook. DVD-V5600/V6600 model uses S5L5010 DVD Processor of Samsung Semiconductor co. 1. Generally, all the features in User Operating is same with '05 product. 2. But in view of Circuitry Architecture, RF-IC for DVD Deck Servo operation are built-in S5L5010 DVD Processor. This is the only difference between DVD Block of '06 product and '05 product. 3. In view of bundle accessory, MIDAS NTSC Combo gives newly designed Remocon Assembly. The design of Remocon is SAMSUNG '06 Style - Black colored. 4. And there is one change of A/V terminal location. AUX Input terminal(RCA Input jack) in the Front Panel Assembly is moved from Right side to Left side in Front View. This is the difference in VCR Board Assembly.
2-2
Samsung Electronics
Product Specification
Remote Control
AK59-00052C
Owners Instructions
AK68-00956C
Video/Audio Cable
AC39-00073A
RF Cable
AC39-42001J
Samsung Electronics
2-3
Product Specification
MEMO
2-4
Samsung Electronics
X-Point (Tracking Center) Adjustment ; NVRAM Option Setting ; Head Switching Adjustment ;
Fig. 3-1
Samsung Electronics
3-1
3-2
Samsung Electronics
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 MOVE : SAVE :
Fig.3-3
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 MOVE : COMPLETE
Fig.3-4
ENTER
DVD-V5600/ XAX, XAP, XAO DVD-V6600/ XAX, XAP, XAO DVD-V5600/ GEN, RCL, STR DVD-V6600/ GEN, RCL, STR 2, 4, 7, 8, 9, 14, 16, 17, 20, 22, 25, 26, 29, 31 2, 4, 7, 8, 9, 14, 16, 28, 22, 25, 26, 29, 31
Samsung Electronics
3-3
U1
U3
U5
U3
Pin 136
Fig. 3-5 Location of test Point (DVD Main PCB - Top Side)
3-4
Samsung Electronics
Samsung Electronics
3-5
3-2-2(b) SKEW Adjustment Method Needed to minimize the variations in Skew of the Pickup unit and to provide optimum match with the recorded signal on the Disc. 1) Connect an Oscilloscope to the Pin 142 Test Point (See Fig. 3-5). 2) Connect Power, Open the Tray and Play Ch.14 Which is in the TDV-533 Disc. Set the Oscilloscope Range as follows : (Voltage ; 50mV/Div., Frequency ; 10m Sec.) 3) Adjust the Screws A and B (See Fig. 3-6) using a Hex screwdriver until you obtain a Flat Waveform and the picture is stable. Then, go to Chapter 1 and make sure the Waveform is Flat here as well. If not, you have to go back to Chapter 14 and adjust again. If you cannot obtain a Flat waveform, then the unit is defective. Note : The Deck must be in a horizontal position. Use both A and B screws to adjust.
3-6
Samsung Electronics
FULL ERASE HEAD #3 GUIDE POST TENSION POST TI LT SCREW X-POSITION ADJUST SLIT AZIMUTH SCREW
Fig. 3-8 Location of Tape Transport Adjustment PINCH ROLLER FE HEAD CYLINDER ASS'Y GUIDE ROLLER "S" GUIDE ROLLER "T" POST TENSION #8 GUIDE POST #9 GUIDE POST
#3 GUIDE POST
MAIN BASE
Samsung Electronics
3-7
SCREW (A) TI LT SCREW X-POSITION ADJUST SLIT SCREW (B) AZIMUTH ADJUST
3-8
Samsung Electronics
b. AC HEAD TILT ADJUSTMENT 1) Playback a blank tape and observe the position of the tape at the lower flange of tape guide. 2) Confirm that there is no curl or wrinkle at the lower flange of tape guide as shown in Fig. 3-12 (B). 3) If a curl or wrinkle of the tape occurs, slightly turn the screw (A) tilt adjust on the AC head assy. 4) Reconfirm the AC head height.
(A)
(B)
WRINKLE
(BAD)
Fig. 3-12 Tape Guide Check c. AUDIO AZIMUTH ADJUSTMENT 1) Load alignment tape (Mono scope) and playback the 7KHz signal. 2) Connect channel-1 scope probe to audio output. 3) Adjust screw (B) to achieve maximum audio level. (See Fig. 3-10)
(GOOD)
Samsung Electronics
3-9
d. AC HEAD POSITION (X-POINT) ADJUSTMENT 1) Playback the alignment tape (Color bar) 2) Intermittently short-circuit the two Test Points on VCR Main PCB. (See Fig. 3-2) 3) Press the 0, 5 remote control buttons, then adjustment is operates automatically. (See Fig. 3-1) 4) Connect the CH-1 probe to Envelope the CH-2 probe to HD switching pulse and then trigger to CH-1. 5) Insert the (-) driver into the X-Point adjustment hole and adjust it so that envelope waveform is maximum. Test point : TP2 (Audio Output) TP3 (Envelope) TP4 (HD S/W -Trigger) TP5 (Control Pulse)
3-10
Samsung Electronics
(2) Linearity adjustment (Guide roller S, T adjustment) 1) Playback the Mono Scope alignment tape (SP mode). 2) Observe the video envelope signal on an oscilloscope (triggered by the video switching pulse). 3) Make sure the video envelope waveform (at its minimum) meets the specification shown in Fig. 3-14. If it does not, adjust as follows : Note : a=Maximum output of the video RF envelope. b=Minimum output of the video RF envelope at the entrance side. c=Minimum output of the video RF envelope at the center point. d=Maximum output of the video RF envelope at the exit side. 4) If the section A in Fig. 3-15 does not meet the specification, adjust the guide roller S up or down. 5) If the section B in Fig. 3-15 does not meet the specification, adjust the guide roller T up or down.
c d
ENVELOPE
Samsung Electronics
3-11
6) Play back the Mono Scope alignment tape (SP mode). 7) Connect an oscilloscope CH-1 to the Envelope and CH-2 to the HD SW Pulse for triggering. 8) Turn the guide roller heads with a flat head ( ) driver to obtain a flat video RF envelope as shown in Fig. 3-16.
IDEAL ENVELOPE
GUIDE ROLLER S
GUIDE ROLLER T
3-12
Samsung Electronics
(3) Check Transitional Operation from RPS to Play Check transition from RPS mode to play mode : Using a pre-recorded SP tape, make sure the entry side of envelope comes to an appropriate steady state within 3 seconds (as shown in Fig. 3-17). If the envelope waveform does not reach specified peak-to peak amplitude within 3 seconds, adjust as follows : 1) Make sure there is no gap between the supply roller lower flange and the tape. If there is a gap, adjust the supply guide roller again. 2) Change operation mode from the RPS to the play mode (again) and make sure the entry side of envelope rises within 3 seconds.
ENTRANCE SIDE ENVELOPE
Fig.3-17 Video Envelope Rising when Operation mode Changes from RPS to Play Mode
3-14
Samsung Electronics
REMOVE 2 SCREWS
(3 X 10 B)
RELEASE 3 HOOKS (Bottom View) Fig.4-3 Assy Front Panel Removal (Bottom View)
RELEASE 1 HOOK Fig. 4-4 Function PCB Removal Samsung Electronics 4-1
REMOVE 4 SCREWS
(4 X 10 Y)
REMOVE 3 SCREWS
(3 X 12 Y)
REMOVE 3 SCREWS
(3 X 8 Y)
REMOVE 2 SCREWS
(3 X 8 Y)
REMOVE 2 SCREWS
(3 X 8 Y)
REMOVE 2 SCREWS
(3 X 10 B)
SMPS PCB
FUNCTION PCB
Samsung Electronics
4-3
GEAR FL CAM ASSY MOTOR LOADING ASSY LEVER ARM ASSY HOLDER CASSETTE LEVER DOOR SLIDER FL DRIVE
4-4
Samsung Electronics
Fig.4-9 Top Parts Location-2
FE HEAD ASSY CYLINDER ASSY CE HEAD ASSY LEVER UNIT PINCH ASSY LEVER #9 GUIDE ASSY LEVER TENSION ASSY BAND BRAKE
DISK S REEL ASSY LEVER S BRAKE GEAR IDLE LEVER IDLE ASSY LEVER T BRAKE DISK T REEL
Samsung Electronics
4-5
Fig. 4-10 Bottom Parts Location GEAR JOINT 1 GEAR JOINT 2 BRAKET GEAR ASSY MOTOR CAPSTAN ASSY LEVER T LOAD GEAR LOADING DRIVE ASSY LEVER S LOAD ASSY CLUTCH BELT PULLEY SLIDER CAM
4-6
Samsung Electronics
HOLE "A"
Samsung Electronics
4-7
LEVER FL DOOR
"A"
Assembly : Align the Gear FL Cam with the Gear worm wheel Post as shown drawing. (Refer to Timing point)
4-8
Samsung Electronics
CONNECTOR WAFER
CONNECTOR WAFER
Fig. 4-16 Gear Worm Wheel Removal Fig. 4-17 Cable Flat Removal
Samsung Electronics
4-9
Fig. 4-19 Bracket Gear, Gear Joint 1,2 Removal GEAR JOINT1 GEAR JOINT2 SLIDER CAM
TIMING POINT 1
TIMING POINT 2
4-10
Samsung Electronics
4-4-9 Gear Loading Drive, Slider Cam, Assy Lever Load S, T Removal
1) Remove the Belt Pulley. (Refer to Fig. 4-38) 2) Remove the Gear Loading Drive after releasing Hook [A] in the direction arrow as shown in detail drawing. 3) Remove the Slider Cam . 4) Remove the Assy Lever Load S & Assy Lever Load T .
4-4-10 Gear Loading Drive, Slider Cam, Assy Lever Load S, T Assembly
1) When reinstalling, be sure to align dot of Ass'y Lever Load T with dot of Ass'y Lever Load S as shown in drawing, (Refer to Timing Point 1). 2) Insert the Pin A,B,C,D into the Slider Cam hole, 3) Be sure to align dot of Assy Lever Load T and dot of Gear Loading Drive , (Refer to Timing Point 2). 4) Aline dot of Gear Loading drive with mark of Slider Cam as shown in drawing(Refer to Timing Point 3). TIMING POINT 1 LEVER LOAD T LEVER LOAD S
Fig. 4-21 Gear Loading Drive, Slider Cam, Assy Lever T, S Load Removal
PIN A
Fig.4-22 Gear Loading Drive, Slider Cam, Assy Lever Load S, T Assembly
Samsung Electronics
4-11
ASS`Y BAND BRAKE Fig. 4-23 Lever Pinch Drive, Lever Tension Drive Removal ASS`Y LEVER TENTION SPRING TENTION LEVER STOPPER "A" MARK[B]
4-12
Samsung Electronics
Note : Take extreme care not to be folded and transformed Spring Brake at removing or reinstalling. GEAR IDLE HOOK(A)
SPRING BRAKE ASS'Y LEVER S BRAKE HOOK(C) HOOK(B) ASS`Y LEVER T BRAKE
Samsung Electronics
4-13
REEL T
DETAIL A
DETAIL B
4-14
Samsung Electronics
HOOK [A]
HOOK
35
MAIN BASE
4-4-19 Assy Lever Unit Pinch , Plate Joint, Spring Pinch Drive Removal
1) Lift the Assy Unit Pinch . 2) Remove the Plate Joint from Lever Pinch Drive. 3) Remove the Spring Pinch Drive . Note : 1) Take extreme care not to touch the grease on the Roller Pinch. 2) When reinstalling, be sure to apply grease on the post pinch roller. ASS`Y LEVER UNIT PINCH
Fig. 4-32 Assy Lever Unit Pinch , Plate Joint, Spring Pinch Drive Removal
4-16
Samsung Electronics
FE HEAD
ASS`Y HEAD AC
Samsung Electronics
4-17
Note : 1) Take care not to touch the Ass'y Cylinder and the tape guide post at reinstalling. 2) When reinstalling, Don't push down too much on Screw Driver. 3 SCREWS Fig. 4-36 Assy Slider S, T Removal PLATE GROUND DECK
ASS'Y CYLINDER
4-18
Samsung Electronics
HOOK CAPSTAN
3 SCREWS
Samsung Electronics
4-19
4-4-29 How to Eject the Cassette Tape (If the tape is stuck in the unit)
1) Turn the Gear worm clockwise with screw driver. (Refer to arrow) (Other method : Remove the Screw of Ass'y Motor Load , Separate the Ass'yMotor Load )
HOOK
2) When Slider S,T are approched in the position of unloading, rotate holder Clutch counterclockwise after inserting screw driver in the hole of frame's bottom in order to wind the unwinded tape. (Refer to Fig.4-43) (If you rotate Gear Worm continuously when tape is in state of unwinding, you may cause a tape contamination by grease and tape damage. Be sure to wind the unwinded tape in the state of set horizently.) 3) Rotate Gear Worm clockwise using screw driver again up to the state of eject mode and then pick out the tape.(Refer to Fig.4-42)
FRAME
4-5 The table of cleaning, Lubrication and replacement time about principal parts
1) The replacement time of parts is not life of parts. 2) The table 4-1 is that the VCR Set is in normal condition (normal temperature, normal humidity). The checking period may be changed owing to the condition of use, runtime and environmental conditions. 3) Life of the Cylinder Assy is depend on the condition of use. 4) See exploded view for location of each parts. <Table 4-1> * Parts Name POST TENSION SLANT POST S, T #8 GUIDE SHAFT CAPSTAN SHAFT #9 GUIDE POST #3 GUIDE POST GUIDE ROLLER S, T CYLINDER ASSY FE HEAD ACE HEAD PINCH ROLLER POST REEL S, T SLEEVE TENSION POST CENTER LEVER IDLE BOSS (2Point) CAPSTAN MOTOR PULLEY BELT PULLEY HOLDER CLUTCH ASSY GEAR CENTER ASSY GEAR IDLE (2Point) LOADING MOTOR BAND BRAKE ASSY BRAKE T ASSY : Cleaning Checking Period 500 1000 O O O O O O O O O 1500 O O O 2000 O O O O O O O O O O O O 2500 O O O O O 3000 O O O O O O O O O O O O O 3500 O O O O O 4000 O O O O O O O O O O O O O 4500 O O O O O 5000 O O O O O O O O O O O O O : Add Oil Remark - To clean the parts, use patch and alcohol (solvent). - After cleaning, use the video tape after alcohol is gone away completely. - We recommend to use oil [EP-50] or solvent. - One or two drops of oil should be applied after cleaning with alcohol. - Periodic time of applying oil (Apply oil after cleaning) - The excessive applying oil may be the cause of malfunction.
T A PE P A T H S Y S T E M
D R I V I N G
B R A K E
S Y S T E M
S Y S T E M
O O O O O O
O O O O O O O
O O O O O O O O
O O O O O O O O
Samsung Electronics
4-21
2 HOOKS "A"
4-22
Samsung Electronics
SLIDER HOUSING
Samsung Electronics
4-23
1 SCREW
4 SOLDERING
4-24
Samsung Electronics
1 HOOK
"D"
"A" "A" ASS'Y PCB DECK 2 SOLDERING Fig 4-47 Assy Housing Removal
Samsung Electronics
4-25
3 SCREWS
SHAFT PICK UP
HOOK
2 SCREWS "A" CHASSIS SUB GEAR FEED A GEAR FEED B MOTOR SPINDLE
HOOK
4-26
Samsung Electronics
5. Troubleshooting
F1SD01 is normal?
No
Change fuse
Yes
No
No
No
Replace Q1SD11
Samsung Electronics
5-1
Troubleshooting
Is the measurement of power with in normal value? is the SMPS to Main connector properly connected? Yes
No
No
No
No
No
Check the circuity around the swich. check the condition of commmunication with Main Micom (IC601,4,6,14,15,16,PRQ, SRQ, SCLK DATA-IN, DATA-OUT) Yes
End repairs
Change IC701
5-2
Samsung Electronics
Troubleshooting
(VCR Section)
Ee-video Yes Insert the casette tape recorded by anothe VCR and press play button
No
No
No
Check timer
No
PB-Video
No
Yes
Samsung Electronics
5-3
Troubleshooting
(VCR Section)
Turn VCR power on Yes Load a tape and press play button
No
No
No
Check cylinder
No
5-4
Samsung Electronics
Troubleshooting
No
DC
Stop Mode
Change IC601
Samsung Electronics
5-5
Troubleshooting
(VCR Section)
No
REC mode
No
No
Change tape
Yes
Change SW602
No
Check IC601
REC-Video Yes
No
5-6
Samsung Electronics
Troubleshooting
(VCR Section)
No
No
Change IC601
Check timer
No
No
Check IC601
No
Check mechanism
Samsung Electronics
5-7
Troubleshooting
(VCR Section)
No
No
Change deck
No
No
Change IC601
END
No
No
Check IC601
5-8
Samsung Electronics
Troubleshooting
(VCR Section)
No
No
No
Check DM B+ line
No
Change IC601
No
Change IC601
Samsung Electronics
5-9
Troubleshooting
(VCR Section)
LINE 2 INPUT
No
No
Check IC601
Change IC301
No
No
5-10
Samsung Electronics
Troubleshooting
(VCR Section)
No
No
Check C305
No
No
No
Samsung Electronics
5-11
Troubleshooting
(VCR Section)
No
No
No
Check IC601-23
Video IC301-26 No
Yes
Video IC601-49, 47 No
Yes
Video IC801-2 No
Yes
Change IC301
Check IC601
Check IC801
5-12
Samsung Electronics
Troubleshooting
(VCR Section)
No
No
No
Change XT301
No
Change IC301
Samsung Electronics
5-13
Troubleshooting
(VCR Section)
No
No
Yes
No
Check IC601
Change IC301
5-14
Samsung Electronics
Troubleshooting
(VCR Section)
No
No
Change IC601
Samsung Electronics
5-15
Troubleshooting
(VCR Section)
No
No
No
No
Change IC601
5-16
Samsung Electronics
Troubleshooting
(VCR Section)
L1/L2
No
Check C528
No
Check IC601
No
Change IC501
No
Samsung Electronics
5-17
Troubleshooting
(VCR Section)
Missing audio
MONO
MONO
HIFI
No
Change IC501
No
Check cylinder
5-18
Samsung Electronics
Troubleshooting
MONO
No
Check PB mode
No
No
No
No
Change IC301
No
Check R331
No
No
Samsung Electronics
5-19
Troubleshooting
(VCR Section)
MONO
Audio select
HIFI
No
No
5-20
Samsung Electronics
Troubleshooting
No Servo Lock
(VCR Section)
Play
No
Check CN604-1
No
No
Change IC601
Samsung Electronics
5-21
Troubleshooting
(VCR Section)
No
CN604-3 AL 5V Yes
No
No
No
Change IC601
No
No
Check IC601
5-22
Samsung Electronics
Troubleshooting
(VCR Section)
No
CN604-3 5V Yes
No
Check 5V line
No
No
Change IC601
Samsung Electronics
5-23
Troubleshooting
No focus incoming
No
5-24
Samsung Electronics
Troubleshooting
No
Check U3.
No
Check U5.
U13-175
Samsung Electronics
5-25
Troubleshooting
NO LD CD ON
U3-157 is 5V?
No
Check U3.
Yes
Divide RQ2 emitter terminal voltage and 3.3V real voltage difference into 4.7ohm. Yes
No
Yes
5-26
Samsung Electronics
Troubleshooting
No Search Operation
No
No
Yes
Check pick-up.
No
No
Yes
No
No
Samsung Electronics
5-27
Troubleshooting
Yes
No
No
No
No
5-28
Samsung Electronics
Troubleshooting
U3-144
No
No
U3-176
Samsung Electronics
5-29
Troubleshooting
No Tray open/close
U3-91 (1.65V) Open ; "L > 1.65V" Close ; "H < 1.65V" Yes
No
No
5-30
Samsung Electronics
Troubleshooting
No
No
No
Samsung Electronics
5-31
Troubleshooting
(DVD Section)
No
No
No
5-32
Samsung Electronics
Troubleshooting
(DVD Section)
No
No
No
Samsung Electronics
5-33
Troubleshooting
Pin of VDDP in U3 has normal level? Yes 27MHz clock input is normal at pin 112 in U3? Yes Analog output is normal at pin 80,82 in U3? Yes Analog signals are inputted normally VIC1-6.8? Yes Power is normal at VIC1-1, 34? Yes Pin 5 in VIC1 is in high stste? Yes Peak to peak voltage level of VIC1-33? Yes Peak to peak voltage level of IC801-2 Yes Video signal of about 1V appears at output jack? Yes Check the RCA cable.
No
No
Check ZY1.
No
No
No
No
No
No
No
5-34
Samsung Electronics
6-1 Cabinet Assembly (DVD-V5600) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2 6-2 Cabinet Assembly (DVD-V6600) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-4 6-3 VCR Mechanical Parts (Top Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-6 6-4 VCR Mechanical Parts (Bottom Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-8 6-5 DVD Mechanical Parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-10
Samsung Electronics
6-1
BRACKET-FRAME (S.N.A.)
(M3 x 8 Y)
P003
W202 P002
(M3 x 12 Y)
W202
(M3 x 12 Y)
(M4 x 12 Y)
W252 P001
C015
P005
A001
Samsung Electronics
C001
Loc. No A001 C001 C002 C003 C011 C012 C015 C022 P001 P002 P003 P005 P025 W001 W200 W202 W252
Parts No. AK59-00052C AK97-01486B AK64-01575A AK64-01574B AK64-00551A AC61-62032A AK64-00895A AK64-01582A AK92-00841B AK92-00842B AK92-00934A AK92-00843C AC39-10200A 6003-000275 6003-001375 6003-000277 AC60-12126A
Description ; Specification REMOCON-ASSY;DVD-V9600/XAA,SEC,197 ASSY-PANEL FRONT;HIPS94V2,DVD-V560 DOOR-TRAY;DVD-V5600,ABS94HB,T2.35, DOOR-CASSETTE;DVD-V5600,ABS94HB,T2 DOOR-SPRING;04-SNYCOM,SUS304,T0.32 SPRING ETC-MASK;SV-C130,SUS,4.4,-, CABINET-TOP;DVD-V4600C,PCM,T0.525, DOOR-FRONT;DVD-V5600,HIPS 94HB,T2. ASSY PCB-MAIN VCR;DVD-V5600/XAX,MI ASSY PCB-MAIN DVD;DVD-V5600/XAX,MI ASSY PCB-SMPS;DVD-V5600/XAX,SMPS F ASSY PCB-FUNCTION;DVD-V5650/XAA,MI CBF-POWER CORD;AT,-,EP2/N,HOUING(2 SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC( SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(YE SCREW-MACHINE;TH,+,-,M4,L12,ZPC(YE
Q ty S.N.A 1 1 1 1 1 1 1 1 1 1 1 1 1 2 7 5 4 SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SC
Remark
Samsung Electronics
6-3
BRACKET-FRAME (S.N.A.)
(M3 x 8 Y)
P003
W202 P002
(M3 x 12 Y)
W202
(M3 x 12 Y)
(M4 x 12 Y)
W252 P001
C015
P005
A001
Samsung Electronics
C001
Loc. No A001 C001 C002 C011 C012 C015 C022 P001 P002 P003 P005 P025 W001 W200 W202 W252
Parts No. AK59-00052C AK97-01497B AK64-01575B AK64-00334A AC61-62032A AK64-00895B AK64-01612A AK92-00841B AK92-00842B AK92-00934A AK92-00843C AC39-10200A 6003-000275 6003-001375 6003-000277 AC60-12126A
Description ; Specification REMOCON-ASSY;DVD-V9600/XAA,SEC,197 ASSY-PANEL FRONT;HIPS94HB,DVD-V660 DOOR-TRAY;SV-C470,ABS94HB,T2.35,H2 DOOR-SPRING;DVD-V3500,SWPB,,,,-,, SPRING ETC-MASK;SV-C130,SUS,4.4,-, CABINET-TOP;DVD-V4600C,PCM,T0.525, DOOR-FRONT;DVD-V6600,HIPS 94HB,T2. ASSY PCB-MAIN VCR;DVD-V5600/XAX,MI ASSY PCB-MAIN DVD;DVD-V5600/XAX,MI ASSY PCB-SMPS;DVD-V5600/XAX,SMPS F ASSY PCB-FUNCTION;DVD-V5650/XAA,MI CBF-POWER CORD;AT,-,EP2/N,HOUING(2 SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC( SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(YE SCREW-MACHINE;TH,+,-,M4,L12,ZPC(YE
Q ty S.N.A 1 1 1 1 1 1 1 1 1 1 1 1 2 7 5 4 SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SC
Remark
Samsung Electronics
6-5
T001
T072 T073 T074 T013 T009 T015 T008 W016 T010 T025 T023 T024 T057 T006 T071 T007 (Optional)
T003 T019 T021 T026 T027 T075 T022 T028 T011 W015 T020 T002 T028 W201 T004 T005 T029
6-6
Samsung Electronics
Loc. No T001 T002 T003 T004 T005 T006 T007 T008 T009 T010 T011 T013 T015 T019 T020 T021 T022 T023 T024 T025 T026 T027 T028 T029 T057 T071 T072 T073 T074 T075 W015 W016 W201
Parts No. AC97-02624A AC61-00391A AC31-00018A AC66-00101A AC66-00102A AC61-00105A AC61-00390A AC97-02570A AC97-02556A AC97-02625A AC66-00094A AC33-00018A AC97-02620A AC66-00124A AC66-00123A AC66-00115A AC66-00114A AC97-02562A AC61-00107A AC97-02560A AC97-02567A AC97-02568A AC61-00106A AC66-00104A AC61-00386A AC61-00388A AC97-02622A AC61-00397A AC97-02564A AC66-00108A 6006-001092 6006-001154 6001-001711
Description ; Specification ASSY-CYLINDER;6NSJ/6NJ,CX13A-MIRIO PLATE-GROUND DECK;X-13,SPTE,T0.3,MOTOR-LOADING ASSY;-,SCORPIO2(TS-1 GEAR-WORM WHEEL;X-13,POM(M90-44 EQ GEAR-FL CAM;X-13,POM(M90-44 EQU),SPRING ETC-PINCH DRIVE;TS-10,SUS30 PLATE-JOINT;X-13,SECC 20/20,T0.8,ASSY-SLIDER SUPPLY;(PPS),X-13,ASSY-SLIDER TAKE UP;-,X-13,ASSY-HEAD A/C;-,X-13A,LEVER-9 GUIDE;X-13,PPS,-,-,-,-,BRO HEAD-FULL ERASE;-,-,X-13,-,ASSY-UNIT PINCH;-,X-13A,REEL-S;X-13,POM,-,BLK,2.5,-,27,REEL-T;X-13,POM,-,BLK,2.5,-,36.5,LEVER-IDLE;X-13,POM,T15,W38,L25,-, GEAR-IDLE;X-13,PET,0.5,54,27,NAT,2 ASSY-LEVER TENSION;-,X-13,SPRING ETC-TENSION LEVER;TS-10,SUS ASSY-BAND BRAKE;-,X-13,ASSY-LEVER BRAKE S;-,X-13,ASSY-LEVER BRAKE T;-,X-13,SPRING ETC-BRAKE;TS-10,SUS304-WPB, SLIDER-FL DRIVE;X-13,SECC,T1.0,W15 SLEEVE-TENSION;X-13,-,-,2.5,-,-,-, GUIDE-CASS DOOR;X-13,POM(M90-44 EQ ASSY-HOLDER CASSETTE;SECC+POM+SUS, SPRING ETC-LOCK;X-13,SWP-B,0.25,2. ASSY-LEVER ARM;-,X-13,LEVER-DOOR;X-13,POM,-,W30,L75,-,NA SCREW-MACHINE;WS,PH,+,M3.0,L6.0,ZP SCREW-TAPTITE;WSP,PH,+,M2.6,L5.6,Z SCREW-MACHINE;PH,+,M3,L3.3,ZPC(YEL
Q ty S.N.A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 3 1 1 SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
Remark
Samsung Electronics
6-7
T046
W018 T036 T034 T037 T035 T044 T043 T042 T041 T038 T039
T049 T076
T050 T048
T040
W019
6-8
Samsung Electronics
Loc. No T034 T035 T036 T037 T038 T039 T040 T041 T042 T043 T044 T046 T048 T049 T050 T076 W018 W019
Parts No. AC66-00103A AC66-00077A AC61-00389A AC66-00092A AC66-00099A AC70-00003A AC66-00100A AC66-00078A AC97-02557A AC97-02558A 3101-001430 AC66-60051A AC97-02566A AC60-30306A AC66-00111A AC97-02569A 6003-001450 6003-000108
Description ; Specification GEAR-JOINT 1;X-13,POM(M90-44 EQU), GEAR-JOINT 2;X-11,POM(K300),-,-,-, BRACKET-GEAR;X-13,SECC 20/20,T0.8, SLIDER-CAM;X-13,SECC 20/20,T1.2,-, LEVER-PINCH DRIVE;X-13,SECC 20/20, HOOK-CAPSTAN;-,-,L10,W10,H10,POM(M LEVER-TENSION DRIVE;X-13,SECC 20/2 GEAR-LOADING DRIVE;X-11,POM(K300), ASSY-LEVER LOADING S;-,X-13,ASSY-LEVER LOADING T;-,X-13,MOTOR-CAPSTAN;-,-,12V,90mA BELT-PULLEY;-,5CM-70,2 * 2,-,71.3, ASSY-GEAR CENTER;-,X-13,FASTENER-WASHER SLIT;-,-,ID2.1,OD5 LEVER-UP DOWN;X-13,POM,T15,E25,L55 ASSY-CLUTCH;-,X-13,SCREW-TAPTITE;PH,+,S,M2.6,L5,ZPC(Y SCREW-TAPTITE;BH,+,B,M2.6,L6,ZPC(Y
Q ty S.N.A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
Remark
Samsung Electronics
6-9
H108
H104 H109
6-10
Samsung Electronics
Loc. No H102 H103 H104 H105 H106 H107 H108 H109 H202 H203 H204 H205 H206 H207 H210 H211 H212 H213 H214 H241 W010 W011 W012 W212 W273 W274
Parts No. AK61-00360A AK66-00042A AK97-00608A 6602-001076 AK66-00041A AK66-00045A AK63-00101D AK92-00328A AK73-00005B AH61-50327A AK66-00043A AK66-00044A AK61-00363A AK31-00017A AK31-00005A AK97-01453A AK61-00359A AK61-00357A AK66-00057A AK41-00250A 6003-001157 6001-001370 6002-001086 6003-001251 6003-000233 6001-001730
Description ; Specification BODY CLAMPER-DISC;DP-16,POM,T0.7,GEAR-PULLEY;DP-15,POM,-,-,-,WHT,-, ASSY-MOTOR LOAD;-,DP-15,BELT-RECTANGULAR;CR,T1.2,4.3%,1.2X GEAR-TRAY;DP-15,POM,-,-,-,WHT,-,-, SLIDER HOUSING;DP-15,POM,-,W17.8,L TRAY-DISC;DP-16,ABS,-,W120,L186.3, ASSY PCB-DECK;DP-15,RUBBER-INSULATOR;DP-15,BUTYL,12, SHAFT-P/U;DP-3,SUS,L84.7,OD3,-,-,GEAR-FEED A;DP-15,POM,-,-,-,-,-,-, GEAR-FEED B;DP-15,POM,-,-,-,-,-,-, HOLDER-CAM SKEW;DP-16,POM,-,-,-,BL MOTOR DC-SPINDLE;RF300FA-12350,DPMOTOR-FEED ASSY;-,DP-9,-,-,-,-,-,ASSY-PICK UP;-,DP-19,LD VE HOLDER-CHUCK;DP-16,POM,T3,W140,L96 SPRING ETC-CLAMPER;-,SUS304CSP,-,GEAR-BACKLASH;DP-16,POM,0.5,-,-,WH FFC-PU;DP-17,-,-,23P,-,1mm SCREW-TAPTITE;PWH,+,B,M2,L6,ZPC(YE SCREW-MACHINE;CH,+,M1.7,L3.0,ZPC(Y SCREW-TAPPING;PH,+,B,M1.7,L5.0,ZPC SCREW-TAPTITE;CH,+,-,B,M1.7,L3,ZPC SCREW-TAPTITE;PH,+,-,B,M2,L6,ZPC(B SCREW-MACHINE;BH,+,-,M1.7,L2.5,ZPC
Q ty S.N.A 1 1 1 1 1 1 1 1 1 2 1 1 3 1 1 1 1 1 1 1 1 2 3 1 1 4 SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
Remark
Samsung Electronics
6-11
MEMO
6-12
Samsung Electronics
C1P111 2401-000414
Samsung Electronics
7-1
Loc.No Part No C347 C348 C349 C350 C351 C352 C353 C354 C355 C356 C357 C358 C359 C360 C371 C372 C401 C402 C403 C405 C406 C407 C408 C501 C502 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C517 C518 C519 C520 C521 C522 C523 C524 C525 C526 C527 C528 C529 C530 C531 C532 2203-000491 2203-001052 2401-001250 2203-001103 2203-001211 2203-000257 2401-001250 2203-002041 2301-000110 2401-003221 2301-000016 2203-000257 2203-000257 2203-000257 2203-001071 2203-005148 2203-005148 2203-005148 2203-005148 2401-001479 2203-000257 2203-002398 2401-001730 2203-001724 2203-005148 2401-000408 2203-005065 2401-000909 2401-000408 2203-001724 2203-000257 2401-000909 2203-000888 2203-000257 2203-000257 2203-001724 2401-000408 2203-000257 2401-000909 2203-000888 2203-000257 2203-001724 2401-000408 2203-005065 2202-000797 2203-005065 2203-005065 2203-001634 2401-001249 2203-005065 2203-005065 2203-005065 2203-005065 2401-001502 2203-000257
Description ; Specification C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-CER,CHIP;0.56nF,10%,50V,X7R,TP,1 C-AL;4.7uF,20%,35V,GP,TP,4x5,5 C-CER,CHIP;6.8nF,10%,50V,X7R,1608 C-CER,CHIP;8.2nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;4.7uF,20%,35V,GP,TP,4x5,5 C-CER,CHIP;0.47nF,10%,50V,X7R,1608 C-FILM,LEAD-PEF;1.8nF,5%,100V,TP,7 C-AL;100uF,20%,16V,GP,TP,8X5,2.5 C-FILM,LEAD-PEF;22nF,5%,100V,TP,7. C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;0.056nF,5%,50V,C0G,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;470uF,20%,10V,GP,TP,6.3*11mm, C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;22nF,10%,50V,X7R,1608 C-AL;10UF,20%,50V,GP,TP,5X11,5 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-AL;22uF,20%,16V,GP,TP,5x5,2.5 C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;22uF,20%,16V,GP,TP,5x5,2.5 C-CER,CHIP;4.7nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;22uF,20%,16V,GP,TP,5x5,2.5 C-CER,CHIP;4.7nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;33nF,10%,50V,X7R,1608 C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-AL;47uF,20%,16V,GP,TP,6.3x5,2.5 C-CER,CHIP;10nF,10%,50V,X7R,1608
Loc.No Part No C533 C534 C535 C536 C537 C538 C539 C540 C541 C542 C543 C544 C545 C546 C547 C548 C549 C550 C551 C603 C604 C605 C606 C607 C608 C609 C610 C611 C613 C614 C615 C616 C617 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C633 C634 C635 C636 C637 C643 C644 C653 2203-005065 2203-005065 2203-005148 2203-001724 2401-000918 2203-001724 2401-000918 2203-001724 2401-001250 2203-005065 2203-001724 2203-001724 2203-000257 2401-001775 2401-002419 2203-005065 2203-005065 2203-005065 2203-000257 2203-000257 2203-000257 2401-000360 2203-000257 2203-000257 2401-002165 2203-002398 2203-000975 2203-000783 2401-003107 2203-000257 2203-000257 2203-005148 2401-001502 2203-000681 2203-000626 2203-005065 2203-000236 2401-002165 2202-000797 2203-005148 2203-001697 2401-001168 2203-005221 2401-001502 2203-000257 2203-001071 2203-000140 2203-001071 2203-000257 2202-000797 2203-000257 2203-000257 2203-000257 2203-000257
Description ; Specification C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-AL;4.7uF,20%,35V,GP,TP,4x5,5 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-CER,CHIP;4700nF,+80-20%,16V,Y5V, C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;470nF,20%,50V,GP,TP,4x7,5 C-AL;0.47uF,20%,50V,GP,TP,4x7,2.5 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;100uF,20%,50V,GP,TP,8x11.5,5 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CER,CHIP;22nF,10%,50V,X7R,1608 C-CER,CHIP;47nF,10%,25V,X7R,TP,160 C-CER,CHIP;0.33nF,5%,50V,C0G,1608 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;47uF,20%,16V,GP,TP,6.3x5,2.5 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.022nF,5%,50V,C0G,1608 C-CER,CHIP;1000nF,+80-20%,10V,Y5V, C-CER,CHIP;0.1nF,5%,50V,C0G,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;0.082nF,5%,50V,NP0,1608 C-AL;33uF,20%,16V,GP,TP,6.3x5,2.5 C-CER,CHIP;15nF,10%,50V,X7R,1608 C-AL;47uF,20%,16V,GP,TP,6.3x5,2.5 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;0.056nF,5%,50V,C0G,1608 C-CER,CHIP;1.5nF,10%,50V,X7R,1608 C-CER,CHIP;0.056nF,5%,50V,C0G,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608
7-2
Samsung Electronics
Loc.No Part No C657 C6B01 C701 C702 C703 C704 C801 C802 C803 C804 C811 C812 C815 C829 C831 C832 CFSC1 CN101 CN102 CN301 CN302 CN303 CN701 D1P103 D1P105 D1P107 D1P108 D301 D601 D603 D604 D605 D606 D607 D701 D702 D703 D704 D706 D801 DOC3 DOC4 DOIC2 DOL1 DOL2 DOR1 DOR2 DOR3 DT701 FL042 GP601 IC301 IC501 IC601 2203-000257 2401-002259 2203-000440 2203-000257 2401-002165 2401-001992 2401-003107 2401-000408 2401-000408 2203-000257 2203-000440 2203-000257 2401-001479 2203-000491 2203-000491 2401-003107 2202-000797 3711-005565 3711-001246 3708-000391 AC37-00028A 3708-001165 3711-004013 0401-000101 0401-000101 0401-000101 0401-000101 0402-000127 0401-000101 0402-000127 0402-000127 0401-000101 0402-000127 0402-000127 0401-000101 0401-000101 0401-000101 0401-000101 0401-000005 0401-000101 2203-005148 2203-005148 3707-001065 2901-001125 3301-001419 2007-000402 2007-000402 2001-000515 AK07-00052A 3809-001206 AC63-00043A 1204-001952 1204-002222 AK09-00098A
Description ; Specification C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;100000uF,+80-20%,5.5V,-,TP,12 C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-AL;2200UF,20%,10V,WT,TP,10X20MM, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-AL;470uF,20%,10V,GP,TP,6.3*11mm, C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y HEADER-BOARD TO BOARD;NOWALL,24P,1 HEADER-BOARD TO BOARD;NOWALL,12P,1 CONNECTOR-FPC/FFC/PIC;10P,1.25mm,S CONNECTOR-SOCKET;-,X-11,T9.0,W8.5, CONNECTOR-FPC/FFC/PIC;6P,1.25MM,ST HEADER-BOARD TO CABLE;3WALL,10P,1R DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-RECTIFIER;1N4002,100V,1A,DODIODE-SWITCHING;1N4148,75V,150mA,D DIODE-RECTIFIER;1N4002,100V,1A,DODIODE-RECTIFIER;1N4002,100V,1A,DODIODE-SWITCHING;1N4148,75V,150mA,D DIODE-RECTIFIER;1N4002,100V,1A,DODIODE-RECTIFIER;1N4002,100V,1A,DODIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-SWITCHING;1N4148,75V,150mA,D C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 CONNECTOR-OPTICAL;PLUG,GP1FA550TZ, FILTER-EMI ON BOARD;50V,0.5A,-,220 BEAD-SMD;220ohm,1608,TP,133ohm/70M R-CHIP;150ohm,5%,1/10W,TP,1608 R-CHIP;150ohm,5%,1/10W,TP,1608 R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X LED DISPLAY;BCD-9044A,MIDAS,40,9,4 CABLE-FLAT;30V,80C,140MM,6P,1.25MM SHIELD CASE-GROUND PCB;SV-643F,STP IC-VIDEO PROCESS;LA71207,QFP,80P,1 IC-SIGNAL PROCESSOR;LA72670M-MPB,Q IC MICOM;MN101D10G-CG,DVD-V8650,10 IC-EEPROM;S524A40X41,512x8Bit,DIP,
Loc.No Part No IC6B1 IC801 J505 J506 J507 J904 J905 JACK1 JFSC2 JK801 L1P101 L1P103 L1SS04 L302 L303 L304 L305 L306 L307 L308 L501 L502 L601 L602 L603 L604 L701 L803 P022 PIC3 PT601 PT602 Q1P101 Q1P102 Q1P103 Q1P104 Q1P105 Q1P106 Q1P107 Q1P110 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q601 Q701 Q702 Q703 Q704 Q705 Q708 AC14-12009W 1204-001927 2007-000070 2007-000033 2007-000070 2007-000070 2007-000070 3722-002302 2007-000070 3722-002301 2701-000002 2701-000002 AC27-12001N 3301-000297 3301-000297 3301-000297 AC27-92001M 2702-000120 2701-000002 2702-000166 3301-000297 3301-000297 2702-000108 2701-000002 2701-000002 3301-000297 2701-000002 2701-000002 AC37-00027A 1203-003216 0604-001141 0604-001141 0501-000362 0504-000142 0501-000341 0501-000362 0501-000362 0501-000362 0501-000362 0501-000362 0501-000002 0501-000341 0501-000002 0501-000442 0501-000002 0501-000442 0501-000442 0504-000129 0501-000290 0501-000290 0501-000290 0501-000290 0501-000290 0501-000341
Description ; Specification IC-RESET;PST572K,TO-92,R59-1766 2. IC-AUDIO PROCESSOR;MM1501,SOT,6P,R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/4W,TP,3216 R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 JACK-PIN;6P,Ni,WH-GN/RD-BU/BK-RD,A R-CHIP;0ohm,5%,1/10W,TP,1608 JACK-PIN;6P,Ni,YL/WH/RDx2,ANGLE INDUCTOR-AXIAL;100UH,10%,4298 INDUCTOR-AXIAL;100UH,10%,4298 COIL CHOKE;10UH-15%,RA,K-30,Q80,15 BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD INDUCTOR-RADIAL;15000uH,5%,6.2x7.4 INDUCTOR-AXIAL;100UH,10%,4298 INDUCTOR-RADIAL;47uH,5%,6.0x6.4mm BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T INDUCTOR-RADIAL;100uH,5%,6.0x6.4mm INDUCTOR-AXIAL;100UH,10%,4298 INDUCTOR-AXIAL;100UH,10%,4298 BEAD-AXIAL;25ohm,3.6x1.2x5.7mm,-,T INDUCTOR-AXIAL;100UH,10%,4298 INDUCTOR-AXIAL;100UH,10%,4298 CONNECTOR-HEADER;20045WS,X-11,T8.5 IC-POSI.FIXED REG.;G9133,TO-220F,4 PHOTO-INTERRUPTER;-,-,0mW,SNAP,TP PHOTO-INTERRUPTER;-,-,0mW,SNAP,TP TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-DIGITAL;FJN4301R,PNP,300MW,4.7K TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-SMALL SIGNAL;KSC2328A-Y,NPN,100 TR-SMALL SIGNAL;KSA812,PNP,150MW,S TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSA812,PNP,150MW,S TR-SMALL SIGNAL;KTC3203-Y,NPN,400m TR-SMALL SIGNAL;KSA812,PNP,150MW,S TR-SMALL SIGNAL;KTC3203-Y,NPN,400m TR-SMALL SIGNAL;KTC3203-Y,NPN,400m TR-DIGITAL;KSR1104,NPN,200mW,47K/4 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW TR-SMALL SIGNAL;KSA643-Y,PNP,500mW TR-SMALL SIGNAL;KSA643-Y,PNP,500mW TR-SMALL SIGNAL;KSA643-Y,PNP,500mW TR-SMALL SIGNAL;KSA643-Y,PNP,500mW TR-SMALL SIGNAL;KSC1623-L,NPN,200m
IC603 1103-001330
Samsung Electronics
7-3
Loc.No Part No Q709 Q710 Q711 Q712 Q713 Q714 Q715 Q801 QFSC1 R1P101 R1P102 R1P103 R1P104 R1P108 R1P109 R1P111 R301 R302 R303 R304 R305 R306 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R319 R320 R322 R326 R327 R328 R329 R330 R331 R332 R333 R334 R335 R336 R338 R339 R340 R341 R342 R343 R344 R345 0501-000341 0501-000341 0501-000341 0501-000341 0501-000341 0501-000341 0501-000341 0501-000002 2007-000070 2001-000855 2001-000008 2001-000362 2007-000124 2001-000062 2001-000062 2001-000062 2007-000092 2007-001056 2007-000079 2007-000079 2001-000734 2001-000362 2007-000106 2007-000105 2007-000124 2007-001114 2007-000122 2001-000258 2007-000123 2007-001179 2001-000290 2001-000387 2001-000387 2001-000290 2007-000079 2007-000082 2007-000122 2007-000070 2007-000127 2007-000133 2007-000402 2007-000129 2007-000078 2001-000221 2007-000094 2007-000097 2007-000090 2007-000074 2007-000124 2007-000124 2001-000522 2007-000090 2007-001002 2007-001002 2001-000429
Description ; Specification TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSA812,PNP,150MW,S R-CHIP;0ohm,5%,1/10W,TP,1608 R-CARBON;560OHM,5%,1/4W,AA,TP,2.4X R-CARBON;15KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;150OHM,5%,1/8W,AA,TP,1.8X R-CHIP;2.2Kohm,5%,1/10W,TP,1608 R-CARBON;470OHM,5%,1/4W,AA,TP,2.4X R-CARBON;470OHM,5%,1/4W,AA,TP,2.4X R-CARBON;470OHM,5%,1/4W,AA,TP,2.4X R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CHIP;6.2Kohm,5%,1/10W,TP,1608 R-CHIP;1.8Kohm,5%,1/10W,TP,1608 R-CHIP;1.8Kohm,5%,1/10W,TP,1608 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;150OHM,5%,1/8W,AA,TP,1.8X R-CHIP;220Kohm,5%,1/10W,TP,1608 R-CHIP;200Kohm,5%,1/10W,TP,1608 R-CHIP;2.2Kohm,5%,1/10W,TP,1608 R-CHIP;680Kohm,5%,1/10W,TP,1608 R-CHIP;1.2Kohm,5%,1/10W,TP,1608 R-CARBON;1.8KOHM,5%,1/8W,AA,TP,1.8 R-CHIP;1.5Kohm,5%,1/10W,TP,1608 R-CHIP;8.2Kohm,5%,1/10W,TP,1608 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;16Kohm,5%,1/8W,AA,TP,1.8x R-CARBON;16Kohm,5%,1/8W,AA,TP,1.8x R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;1.8Kohm,5%,1/10W,TP,1608 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 R-CHIP;1.2Kohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;9.1Kohm,5%,1/10W,TP,1608 R-CHIP;330Kohm,5%,1/10W,TP,1608 R-CHIP;150ohm,5%,1/10W,TP,1608 R-CHIP;27Kohm,5%,1/10W,TP,1608 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8 R-CHIP;22Kohm,5%,1/10W,TP,1608 R-CHIP;47Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;2.2Kohm,5%,1/10W,TP,1608 R-CHIP;2.2Kohm,5%,1/10W,TP,1608 R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;510ohm,5%,1/10W,TP,1608 R-CHIP;510ohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
Loc.No Part No R346 R348 R3D05 R3D06 R401 R402 R501 R502 R503 R504 R505 R506 R507 R508 R509 R510 R512 R513 R514 R515 R516 R517 R518 R523 R524 R525 R526 R527 R528 R601 R602 R603 R604 R606 R609 R610 R611 R613 R614 R615 R616 R617 R618 R619 R621 R622 R623 R624 R630 R631 R632 R633 R634 R637 R638 2007-000078 2007-000086 2007-000124 2001-000800 2007-000121 2007-000121 2007-000090 2007-000088 2007-000092 2007-000097 2001-000786 2007-000077 2007-000081 2007-000130 2001-000780 2001-000780 2007-000088 2001-000786 2001-000786 2007-000092 2007-000078 2007-000078 2007-000084 2007-000088 2001-000786 2001-000786 2007-000088 2007-000091 2007-000805 2001-000522 2001-000034 2007-000094 2001-000034 2001-000522 2001-000429 2001-000290 2001-000472 2001-000290 2001-000429 2007-000086 2001-000429 2007-000122 2007-000098 2001-000290 2007-000077 2007-000077 2007-000084 2007-000084 2007-000098 2007-000098 2007-000097 2007-000106 2007-000070 2007-000096 2007-000082
Description ; Specification R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CHIP;5.6Kohm,5%,1/10W,TP,1608 R-CHIP;2.2Kohm,5%,1/10W,TP,1608 R-CARBON;5.1KOHM,5%,1/8W,AA,TP,1.8 R-CHIP;820ohm,5%,1/10W,TP,1608 R-CHIP;820ohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;7.5Kohm,5%,1/10W,TP,1608 R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CHIP;47Kohm,5%,1/10W,TP,1608 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;470ohm,5%,1/10W,TP,1608 R-CHIP;2.7Kohm,5%,1/10W,TP,1608 R-CHIP;39Kohm,5%,1/10W,TP,1608 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X R-CHIP;7.5Kohm,5%,1/10W,TP,1608 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;7.5Kohm,5%,1/10W,TP,1608 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;7.5Kohm,5%,1/10W,TP,1608 R-CHIP;12Kohm,5%,1/10W,TP,1608 R-CHIP;36Kohm,5%,1/10W,TP,1608 R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;220OHM,5%,1/4W,AA,TP,2.4X R-CHIP;22Kohm,5%,1/10W,TP,1608 R-CARBON;220OHM,5%,1/4W,AA,TP,2.4X R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;5.6Kohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;1.2Kohm,5%,1/10W,TP,1608 R-CHIP;56Kohm,5%,1/10W,TP,1608 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;470ohm,5%,1/10W,TP,1608 R-CHIP;470ohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;56Kohm,5%,1/10W,TP,1608 R-CHIP;56Kohm,5%,1/10W,TP,1608 R-CHIP;47Kohm,5%,1/10W,TP,1608 R-CHIP;220Kohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;30Kohm,5%,1/10W,TP,1608 R-CHIP;3.3Kohm,5%,1/10W,TP,1608
7-4
Samsung Electronics
Loc.No Part No R639 R641 R643 R644 R645 R646 R647 R648 R649 R650 R651 R652 R653 R656 R660 R661 R662 R664 R666 R667 R668 R669 R670 R671 R677 R690 R691 R692 R694 R695 R6A01 R701 R702 R703 R704 R705 R706 R707 R708 R711 R712 R713 R714 R715 R716 R717 R718 R719 R720 R721 R722 R723 R724 R728 R729 2007-000081 2001-000290 2007-000090 2007-000090 2007-000090 2007-000086 2007-000076 2007-000076 2007-000084 2007-000084 2007-000084 2007-000090 2001-000429 2001-000290 2007-000100 2007-000078 2001-000290 2001-000429 2001-000281 2001-000281 2001-000429 2007-000074 2007-000074 2007-000074 2001-000429 2001-000429 2001-000429 2001-000429 2007-000078 2001-000449 2007-000090 2001-000429 2001-000290 2001-000429 2007-000092 2001-000429 2007-000092 2001-000429 2001-000290 2007-000090 2001-000449 2001-000449 2001-000449 2001-000449 2001-000449 2001-000290 2001-000290 2001-000290 2001-000290 2001-000290 2001-000290 2001-000290 2001-000290 2007-001166 2007-001166
Description ; Specification R-CHIP;2.7Kohm,5%,1/10W,TP,1608 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;5.6Kohm,5%,1/10W,TP,1608 R-CHIP;330ohm,5%,1/10W,TP,1608 R-CHIP;330ohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;68Kohm,5%,1/10W,TP,1608 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012
Loc.No Part No R730 R731 R732 R733 R734 R735 R801 R802 R804 R806 R808 R810 R811 R812 RFSC1 RM702 SJACK SW602 SW603 SW604 SW704 SW705 SW706 SW707 SW709 SW713 SW714 SW715 SW716 SW717 2007-001166 2007-001166 2007-001166 2007-001166 2007-001166 2007-001166 2001-000429 2001-000429 2001-000969 2007-000078 2007-000070 2007-000097 2007-000097 2001-000111 2007-000079 0609-001198 3722-001375 AC34-00006B AC34-00005A 3409-001165 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182 3404-001182
Description ; Specification R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012 R-CHIP;75ohm,5%,1/8W,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;47Kohm,5%,1/10W,TP,1608 R-CHIP;47Kohm,5%,1/10W,TP,1608 R-CARBON;150OHM,5%,1/4W,AA,TP,2.4X R-CHIP;1.8Kohm,5%,1/10W,TP,1608 MODULE REMOCON;VERTICAL,19MM,TR JACK-DIN;4P,NI,BLK,ANGLE SWITCH-REC;LSA-1135-9,push,-,16,16 SWITCH MODE;-,-,-,-,-,-,-,-,-,-,-, SWITCH-DETECTOR;5V,1mA,-,50gf,ON-O SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 TM BLOCK;VHA35ASE,NTSC,181CH,-,25d GROUND-PLATE REAR;DVD-V5500,SUS,T0 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;0.22nF,5%,50V,NP0,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;0.22nF,5%,50V,NP0,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-AL;470uF,20%,10V,GP,TP,6.3*11mm, C-AL;330uF,20%,6.3V,GP,TP,8x5mm,5 C-AL;330uF,20%,6.3V,GP,TP,8x5mm,5 C-AL;330uF,20%,6.3V,GP,TP,8x5mm,5 IC-VIDEO PROCESS;LA73054,-,36P,-,S R-CHIP;0ohm,5%,1/10W,TP,1608 BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M R-CHIP;75ohm,1%,1/10W,TP,1608 R-CHIP;75ohm,1%,1/10W,TP,1608 R-CHIP;75ohm,1%,1/10W,TP,1608
TM401 AK40-00013A TM401B AK63-00234A VC10 2203-005148 VC11 2203-005148 VC13 2203-001607 VC17 VC18 VC50 VC6 VC7 VC8 VC9 VE1 VE2 VE4 VE5 VE6 VE7 VIC1 VJ3 VL1 VL2 VR30 VR31 VR32 2203-005148 2203-001607 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2401-002165 2401-000918 2401-001479 2401-003037 2401-003037 2401-003037 1204-001978 2007-000070 3301-001419 3301-001419 2007-001164 2007-001164 2007-001164
Samsung Electronics
7-5
Loc.No Part No VR33 VR34 W196 XT301 XT602 ZD1P02 ZD1P04 ZD1P05 ZD1P06 ZD401 2007-001164 2007-001164 2001-000568 2801-003399 2801-003318 0403-001211 0403-000717 0403-000720 0403-000717 0403-000390
Description ; Specification R-CHIP;75ohm,1%,1/10W,TP,1608 R-CHIP;75ohm,1%,1/10W,TP,1608 R-CARBON;27OHM,5%,1/8W,AA,TP,1.8X3 CRYSTAL-UNIT;3.579545MHz,15ppm,28CRYSTAL-UNIT;32.768KHz,20ppm,28-AA DIODE-ZENER;MTZJ12B,11.8-12.3V,500 DIODE-ZENER;MTZJ5.1B,4.94-5.2V,500 DIODE-ZENER;MTZJ9.1B,8.57-9.01V,50 DIODE-ZENER;MTZJ5.1B,4.94-5.2V,500 DIODE-ZENER;UZP33B,31.4-34.6V,1000
Loc.No Part No PE15 PE3 PE80 PE9 PL3 PL4 PL6 Q1 Q2 Q3 R19 R6 RC1 RC2 RC3 RC4 RC5 RC6 RC7 RC8 RC9 RD1 RE1 RE2 RL15 RL4 RQ1 RQ2 RR1 RR10 RR11 RR12 RR13 RR14 RR2 RR3 RR4 RR5 RR6 RR7 RR8 RR9 U1 U12 U2 U3 U4 U5 U7 VC1 VC2 VC3 VC4 VC5 2401-003036 2401-001479 2401-001479 2401-003036 2703-000398 2007-000033 3301-001419 0501-000341 0501-000341 0501-000341 2007-000070 2007-000070 2203-005148 2203-005148 2401-003107 2203-005148 2401-002165 2203-005148 2203-005148 2203-001634 2401-002165 0407-000116 2401-002042 2401-002042 3301-001419 3301-001419 0501-000279 0501-000279 2007-000090 2007-000078 2007-000881 2007-000881 2007-000090 2007-000905 2007-000075 2007-000090 2007-000090 2007-000090 2007-000134 2007-000075 2007-000075 2007-000100 1107-001369 1203-003806 1103-001133 1204-002556 1105-001397 1003-001735 0801-002701 2203-000681 2203-000681 2203-000681 2203-000681 2203-000681
Description ; Specification C-AL;100uF,20%,16V,GP,TP,5X11mm,5m C-AL;470uF,20%,10V,GP,TP,6.3*11mm, C-AL;470uF,20%,10V,GP,TP,6.3*11mm, C-AL;100uF,20%,16V,GP,TP,5X11mm,5m INDUCTOR-SMD;10uH,10%,3225 R-CHIP;0ohm,5%,1/4W,TP,3216 BEAD-SMD;220ohm,1608,TP,133ohm/70M TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m TR-SMALL SIGNAL;KSC1623-L,NPN,200m R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;0ohm,5%,1/10W,TP,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;33nF,10%,50V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 DIODE-ARRAY;DAP202K,80V,100mA,CK2C-AL;220uF,20%,10V,GP,TP,6.3x11,5 C-AL;220uF,20%,10V,GP,TP,6.3x11,5 BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M TR-SMALL SIGNAL;KSA1182-Y,PNP,150m TR-SMALL SIGNAL;KSA1182-Y,PNP,150m R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;1Kohm,5%,1/10W,TP,1608 R-CHIP;4.7ohm,5%,1/8W,TP,2012 R-CHIP;4.7ohm,5%,1/8W,TP,2012 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;430ohm,5%,1/10W,TP,1608 R-CHIP;220ohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;33Kohm,5%,1/10W,TP,1608 R-CHIP;220ohm,5%,1/10W,TP,1608 R-CHIP;220ohm,5%,1/10W,TP,1608 R-CHIP;68Kohm,5%,1/10W,TP,1608 IC-FLASH MEMORY;29LV800,8Mbit,1Mx8 IC-POSI.ADJUST REG.;KIA78R000,DPAK IC-EEPROM;24C020,256x8,SOP,8P,5.13 IC-DECODER;S5L5010,LQFP,216P,24x24 IC-DRAM;K4S641632,-,64Mbit,1Mx16x4 IC-MOTOR DRIVER;FAN8026G3,SSOPH,28 IC-CMOS LOGIC;74VHCT125A,BUFFER,TS C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608
P002 AC201 AC202 AE201 AE202 AIC8 AL101 C102 C50 CN2 CN3 CN4 FC10 FC11 FC3 FC4 FC7 FC8 FC9 FR1 FR10 FR12 FR13 FR14 FR15 FR16 FR17 FR18 FR19 FR2 FR20 FR21 FR22 FR3 FR4 FR5 FR7 FR8 FR9 PC11 PC13 PC15 PC80 PC9
AK92-00842B 2203-005148 2203-005148 2401-003036 2401-002165 1002-001395 3301-001419 2007-000070 2203-005148 3708-000491 3708-001266 3710-002050 2401-002165 2203-005148 2203-000140 2203-000491 2401-003107 2203-005148 2203-005148 2007-000082 2007-000134 2007-000090 2007-000088 2007-000091 2007-000093 2007-000090 2007-000431 2007-000092 2007-000431 2007-000091 2007-000458 2007-000090 2007-000091 2007-000082 2007-000084 2007-000091 2007-000090 2007-000102 2007-000134 2203-005148 2203-005148 2203-005148 2203-005148 2401-001479
ASSY PCB-MAIN DVD;DVD-V5600/XAX,MI C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,5X11mm,5m C-AL;100uF,20%,16V,GP,TP,6.3x7,5 IC-D/A CONVERTER;PCM1753,24Bit,SSO BEAD-SMD;220ohm,1608,TP,133ohm/70M R-CHIP;0ohm,5%,1/10W,TP,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 CONNECTOR-FPC/FFC/PIC;23P,1mm,STRA CONNECTOR-FPC/FFC/PIC;11P,1MM,STRA SOCKET-BOARD TO BOARD;12P,1R,2mm,S C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1.5nF,10%,50V,X7R,1608 C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 R-CHIP;33Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;7.5Kohm,5%,1/10W,TP,1608 R-CHIP;12Kohm,5%,1/10W,TP,1608 R-CHIP;20Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;16Kohm,5%,1/10W,TP,1608 R-CHIP;15Kohm,5%,1/10W,TP,1608 R-CHIP;16Kohm,5%,1/10W,TP,1608 R-CHIP;12Kohm,5%,1/10W,TP,1608 R-CHIP;18Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;12Kohm,5%,1/10W,TP,1608 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;12Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;100Kohm,5%,1/10W,TP,1608 R-CHIP;33Kohm,5%,1/10W,TP,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
7-6
Samsung Electronics
Loc.No Part No VC6 VR1 VR10 VR11 VR12 VR2 VR3 VR4 VR5 VR6 VR7 VR8 VR9 ZC01 ZC02 ZC03 ZC04 ZC05 ZC06 ZC07 ZC08 ZC09 ZC10 ZC11 ZC14 ZC15 ZC16 ZC17 ZC18 ZC19 ZC20 ZC21 ZC22 ZC23 ZC24 ZC25 ZC26 ZC27 ZC28 ZC29 ZC30 ZC31 ZC32 ZC33 ZC34 ZC35 ZC36 ZC37 ZC38 ZC39 ZC40 ZC41 ZC42 ZC43 ZC44 2203-000257 2007-000074 2007-001167 2007-001167 2007-000082 2007-000074 2007-000074 2007-000074 2007-000074 2007-001157 2007-001167 2007-001167 2007-001167 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-001554 2203-005148 2203-001554 2203-005148 2203-001554 2203-005148 2203-005148 2203-000681 2203-000681 2203-006035 2203-000140 2203-001630 2203-000140 2203-005148 2203-005148 2203-005148 2203-000140 2203-000257 2203-000440 2203-000440 2203-000491 2203-000491 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148
Description ; Specification C-CER,CHIP;10nF,10%,50V,X7R,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;75ohm,5%,1/10W,TP,1608 R-CHIP;75ohm,5%,1/10W,TP,1608 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;750ohm,5%,1/10W,TP,1608 R-CHIP;75ohm,5%,1/10W,TP,1608 R-CHIP;75ohm,5%,1/10W,TP,1608 R-CHIP;75ohm,5%,1/10W,TP,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;0.027nF,5%,50V,C0G,1608 C-CER,CHIP;220nF,+-10%,10V,X7R,160 C-CER,CHIP;1.5nF,10%,50V,X7R,1608 C-CER,CHIP;330nF,+80-20%,16V,Y5V,1 C-CER,CHIP;1.5nF,10%,50V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1.5nF,10%,50V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-CER,CHIP;2.2nF,10%,50V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608
Loc.No Part No ZC45 ZC46 ZC47 ZC48 ZC49 ZC50 ZC53 ZC54 ZC55 ZC56 ZC57 ZC58 ZC59 ZC60 ZC61 ZC62 ZC63 ZC65 ZC66 ZC67 ZC68 ZC69 ZC70 ZC71 ZC72 ZC73 ZE1 ZE2 ZL1 ZL3 ZL5 ZL6 ZR01 ZR02 ZR03 ZR04 ZR05 ZR06 ZR10 ZR11 ZR12 ZR13 ZR14 ZR43 ZR44 ZR45 ZR46 ZR47 ZR48 ZR50 ZR51 ZR52 ZR53 ZR65 2203-000236 2203-006035 2203-005148 2203-000257 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-005148 2203-000626 2203-005148 2203-000440 2203-005148 2203-000531 2401-002165 2401-002165 3301-001309 3301-001419 3301-001419 3301-001419 2007-000125 2007-000074 2007-000126 2007-000074 2007-000084 2007-000084 3301-001419 3301-001419 3301-001419 3301-001419 3301-001419 2007-000070 2007-000109 2007-000608 2007-000608 2007-000116 2007-000116 2007-000093 2007-000090 2007-000102 2007-000102 2007-000123
Description ; Specification C-CER,CHIP;0.1nF,5%,50V,C0G,1608 C-CER,CHIP;220nF,+-10%,10V,X7R,160 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;10nF,10%,50V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;0.022nF,5%,50V,C0G,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;100nF,10%,16V,X7R,1608 C-CER,CHIP;2.7nF,10%,50V,X7R,1608 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 BEAD-SMD;47ohm,1608,TP,-,BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M R-CHIP;3.9Kohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;4.3Kohm,5%,1/10W,TP,1608 R-CHIP;100ohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M BEAD-SMD;220ohm,1608,TP,133ohm/70M R-CHIP;0ohm,5%,1/10W,TP,1608 R-CHIP;1Mohm,5%,1/10W,TP,1608 R-CHIP;240ohm,5%,1/10W,TP,1608 R-CHIP;240ohm,5%,1/10W,TP,1608 R-CHIP;120ohm,5%,1/10W,TP,1608 R-CHIP;120ohm,5%,1/10W,TP,1608 R-CHIP;20Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;100Kohm,5%,1/10W,TP,1608 R-CHIP;100Kohm,5%,1/10W,TP,1608 R-CHIP;1.5Kohm,5%,1/10W,TP,1608
Samsung Electronics
7-7
Loc.No Part No ZR66 ZR79 ZR80 ZR83 ZR88 ZR89 ZR94 ZR97 ZR98 ZY1 2007-000130 2007-000084 2007-000084 2007-000084 2007-000090 2007-000090 2007-000090 2007-000113 2007-000081 2801-003554
Description ; Specification R-CHIP;39Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;10Kohm,5%,1/10W,TP,1608 R-CHIP;33ohm,5%,1/10W,TP,1608 R-CHIP;2.7Kohm,5%,1/10W,TP,1608 CRYSTAL-UNIT;27MHz,10ppm,28-AAM,12
Loc.No Part No IC1SS1 0604-001028 IC1SS2 AC14-12006D L1SS01 AC27-92001Q L1SS02 L1SS03 PT1SD1 Q1SS01 R1SD01 R1SD06 R1SD11 R1SD13 R1SD14 R1SF05 R1SF06 R1SF07 R1SQ11 R1SR01 R1SR02 R1SR03 R1SS01 R1SS03 R1SS04 R1SS05 R1SS06 R1SS08 VA1SS1 W004 ZD1SS2 AC27-12001N AC27-12001N AC26-00012A 0505-001729 2001-000281 2001-000780 2006-000273 2006-000273 2001-000598 2001-000527 2001-000449 2003-000105 2001-000281 2001-000546 2001-000546 2001-000546 2006-000262 2001-000429 2004-000869 2004-000459 2001-000290 2001-000793 1405-001026 6003-000283 0403-001318
Description ; Specification PHOTO-COUPLER;TR,50-600%,250mW,DIP IC;KA431Z,TO-92,TAPING COIL-LINE FILTER;-,25MH,-,-,-,-,-, COIL CHOKE;10UH-15%,RA,K-30,Q80,15 COIL CHOKE;10UH-15%,RA,K-30,Q80,15 TRANS SWITCHING;EER3530,DIVA(EUROP FET-SILICON;SPA04N60C3,N,600V,4.5A R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X R-CEMENT;27KOHM,5%,2W,CA,BK,6.4X6. R-CEMENT;27KOHM,5%,2W,CA,BK,6.4X6. R-CARBON;3.3OHM,5%,1/8W,AA,TP,1.8X R-CARBON;22OHM,5%,1/8W,AA,TP,1.8X3 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8 R-METAL OXIDE;0.33ohm,5%,2W,AD,TP, R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X R-CARBON;270KOHM,5%,1/4W,AA,TP,2.4 R-CARBON;270KOHM,5%,1/4W,AA,TP,2.4 R-CARBON;270KOHM,5%,1/4W,AA,TP,2.4 R-CEMENT;2.7ohm,10%,2W,CB,TP,7.5x1 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3 R-METAL;3Kohm,1%,1/8W,AA,TP,1.8x3. R-METAL;2.2Kohm,1%,1/8W,AA,TP,1.8x R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X R-CARBON;47OHM,5%,1/8W,AA,TP,1.8X3 VARISTOR;470V,600A,9x7mm,TP SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL DIODE-ZENER;MTZJ4.3B,4.17-4.43V,50 DIODE-ZENER;MTZJ20B,18.63-17.7V,50
P003 BD1S01 BD1SS3 C1S03 C1SD02 C1SD11 C1SD12 C1SD13 C1SD16 C1SF02 C1SF04 C1SS01 C1SS04 C1SS06 C1SS07 C1SS08 C1SS10 C1SS11 C1SS12 C1SS15 C1SS17 C1SS18 CN103 CN1SS1 D1SF01 D1SF02 D1SS01 D1SS02 D1SS03 D1SS04 D1SS05 D1SS07 D1SS08 D1SS09 D1SS11 D1SS12 D1SS13 F1SS01 FC1SS1 FC1SS2
AK92-00934A AC27-92001M AC27-92001M 2201-001008 2301-001719 2401-003903 2305-001029 2305-001029 2201-000012 2401-002608 2401-000598 2301-001719 2201-001008 2401-002608 2401-001992 2401-001992 2401-001992 2301-000129 2401-000385 2401-001126 2401-001992 2401-001992 3710-002036 3711-000203 0401-000101 0402-001195 0402-001196 0402-001196 0402-001196 0402-001196 0402-001194 0404-001235 0404-001235 0402-001195 0402-000012 0402-001195 0402-001194 3601-001122 3602-000103 3602-000103
ASSY PCB-SMPS;DVD-V5600/XAX,SMPS F COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD C-CERAMIC,DISC;3.3nF,20%,250V,Y5U, C-FILM,LEAD;100nF,10%,275V,TP,17.5 C-AL;82uF,20%,400V,-,BK,22x25mm,10 C-FILM,LEAD-PEF;10nF,10%,630V,TP,1 C-FILM,LEAD-PEF;10nF,10%,630V,TP,1 C-CERAMIC,DISC;0.22nF,10%,1000V,Y5 C-AL;33uF,20%,35V,GP,TP,5x11,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-FILM,LEAD;100nF,10%,275V,TP,17.5 C-CERAMIC,DISC;3.3nF,20%,250V,Y5U, C-AL;33uF,20%,35V,GP,TP,5x11,5 C-AL;2200UF,20%,10V,WT,TP,10X20MM, C-AL;2200UF,20%,10V,WT,TP,10X20MM, C-AL;2200UF,20%,10V,WT,TP,10X20MM, C-FILM,LEAD-PEF;100nF,5%,50V,TP,10 C-AL;10uF,20%,100V,GP,TP,6.3x11,5 C-AL;330uF,20%,25V,WT,TP,10x12.5,5 C-AL;2200UF,20%,10V,WT,TP,10X20MM, C-AL;2200UF,20%,10V,WT,TP,10X20MM, SOCKET-BOARD TO BOARD;12P,1R,2.5mm HEADER-BOARD TO CABLE;1WALL,2P/3P, DIODE-SWITCHING;1N4148,75V,150mA,D DIODE-RECTIFIER;F1T4,400V,1A,DO-20 DIODE-RECTIFIER;1T5,600V,1A,TS-1,T DIODE-RECTIFIER;1T5,600V,1A,TS-1,T DIODE-RECTIFIER;1T5,600V,1A,TS-1,T DIODE-RECTIFIER;1T5,600V,1A,TS-1,T DIODE-RECTIFIER;SHG2D,200V,2A,-,TP DIODE-SCHOTTKY;SHK65-45R,60V,3000m DIODE-SCHOTTKY;SHK65-45R,60V,3000m DIODE-RECTIFIER;F1T4,400V,1A,DO-20 DIODE-RECTIFIER;UF4007,1KV,1A,DO-4 DIODE-RECTIFIER;F1T4,400V,1A,DO-20 DIODE-RECTIFIER;SHG2D,200V,2A,-,TP FUSE-CARTRIDGE;250V,1.6A,FAST-ACTI FUSE-CLIP;-,-,10mohm FUSE-CLIP;-,-,10mohm HEAT SINK-MAIN;DVD-CM350,AL1050R,T IC-PWM CONTROLLER;ICE2BS01,PDIP,8P
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ZD1SS3 0403-000713
P005 C705 C706 CN702 D705 G-PLAT GRD GRD-F/ JK701 R710
AK92-00843C 2203-000440 2203-000440 3710-001385 0401-000005 AK63-00411A AK63-00410A AK97-01676A 3722-001811 2007-001167
ASSY PCB-FUNCTION;DVD-V5650/XAA,MI C-CER,CHIP;1nF,10%,50V,X7R,1608 C-CER,CHIP;1nF,10%,50V,X7R,1608 SOCKET-BOARD TO CABLE;10P,1R,2mm,A DIODE-SWITCHING;1N4148,75V,150mA,D GROUND-PLATE;DVD-V5650/XAA,SUS T0. GROUND-FUNCTION;DVD-V5650/XAA,PBS ASSY-GROUND FUNCTION;SUS304 T0.2+P JACK-PIN;3P,8.3PI,NI,BLK,R-CHIP;75ohm,5%,1/10W,TP,1608 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6 SWITCH-TACT;DC12V,50MA,100GF,6.0X6
1 1 1 1 1 1 1 1 1 1 1 1 1
ASSY-FULL DECK S.N.A AC97-02616A S.N.A AC97-02610A S.N.A AC97-02580A S.N.A AC61-00384A
1 1 1 1
7-8
Samsung Electronics
Loc.No Part No S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A AC61-00398A AC61-00399A AC66-00093A AC97-02581A AC66-00112A AC66-00113A AC61-00395A AC61-62030A AC61-62031A AC66-00109A AC97-02582A AC60-40645A AC66-00117A AC60-40645A AC61-60563A AC66-00116A AC69-12136A AC97-02583A AC61-60572A AC66-00079A AC66-00095A AC61-60572A AC66-00080A AC66-00096A AC97-02604A 0205-000129 0205-001033 0205-001035 AC97-02611A AC60-30304A AC61-00104A AC61-00404A AC61-21006A AC66-00015A AC66-00110A AC66-00128A AC97-02621A AC61-00385A AC61-00405A AC66-40154A AC61-00383A AC61-00405A AC66-40154A AC97-02618A 3708-001634 AC31-12016F AC41-00238A AC66-00010A AC97-02586A AC97-02555A AC61-00342A AC61-00380A AC61-00402A AC61-00403A AC61-50672A
Description ; Specification POST-TENSION GUIDE;X-13,SUS303C,2, POST-TENSION LEVER;X-13,SUS303,2.5 LEVER-TENSION;X-13,SECC,T0.8,-,-,ASSY-REEL BLOCK;-,X-13,GEAR-CENTER 1;X-13,POM,0.5,25,12.5 GEAR-CENTER 2;X-13,POM,0.5,46,23,N HOLDER-CLUTCH;X-13,POM(SW-01),-,W1 SPRING ETC-WRAP PLAY;X-9,SUS 304-W SPRING ETC-WRAP REV.;X-9,SUS 304-W PULLEY-CLUTCH;X-13,POM,-,NAT,2.5,ASSY-BRAKE BLOCK;-,X-13,FASTENER-PIN BRAKE;-,-,1.5,L=12,-, LEVER BRAKE-S;X-13,POM,T10,W20,L40 FASTENER-PIN BRAKE;-,-,1.5,L=12,-, SPRING ETC-T.BRAKE;X-9,SUS304-WPB, LEVER BRAKE-T;X-13,POM,T10,W20,L40 PAD-T.BRAKE;X-9,FUR FELT,1.5,10.7, ASSY-LOADING BLOCK;-,X-13,SPRING ETC-LOADING;X-9,SUS304WPB,O GEAR-S LOADING;X-11,POM(K300),-,-, LEVER-LOADING S;X-13,SECC 20/20,T1 SPRING ETC-LOADING;X-9,SUS304WPB,O GEAR-T LOADING;X-11,POM(K300),-,-, LEVER-LOADING T;X-13,SECC 20/20,T1 ASSY-SUB MATERIALS;-,DX11,GREASE-SILICON;SC102,JAPAN,1000G/C GREASE;PL-30G,W050030019,OIL;EP-56,W050050072,MICHANG ASSY-PINCH BLOCK;-,X-13A,FASTENER-WASHER PINCH;-,-,D2.7,D4. SPRING ETC-PINCH;TS-10,SUS304-WPB, POST-PINCH ROLLER;X-13,SUS XM-7,-, CAP-PINCH;X-9,POM,-,-,-,-,LEVER-PINCH SUB;TS-10,SECC E20/20, LEVER-PINCH MAIN;X-13,SECC,T1.2,W2 ROLLER-PINCH;-,Rubber,14,18,NAT,-, ASSY-GUIDE BLOCK;-,X-13A,BASE-TAKE UP SLIDER;X-13,PPS(Ryton POST-SLANT GUIDE;X-13,SUS303,PI 3. ROLLER-TAKE UP ASSY;-,VW-32,OD7,-, BASE-SUPPLY SLIDER;X-13,PPS(Ryton POST-SLANT GUIDE;X-13,SUS303,PI 3. ROLLER-TAKE UP ASSY;-,VW-32,OD7,-, ASSY-DECK ONLY;-,DX13A,L/Speed CONNECTOR-FPC/FFC/PIC;3P,1.25MM,AN MOTOR-LOADING;MDHB2B66,SCORPIO2(TS PCB-LOADING MOTOR;SCORPIO2(TS-10A) GEAR WORM;TS-10,POM,0.8,1,-,NAT,7. ASSY-M/B BLOCK;-,X-13,ASSY-BASE MAIN;-,X-13,POST-LOADING;X-11,SWCH18A,OD3.0,L9 BASE-MAIN;X-13,SECC,T1.2,-,-,NTR,POST-REEL;X-13,SWCH18A,3,-,-,Non-e POST-CENTER;X-13,SWCH18A,-,-,-,Non POST-PINCH LEVER;X-9,SWCH18A,-,L24
Qty S.N.A Remark 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.2 1.16 0.04 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA
Loc.No Part No S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A T001 T002 T003 T003 T004 T005 T006 T007 T008 T009 T010 T011 T013 T015 T016 T019 T020 T021 T022 T023 T024 T025 T026 T027 T028 T028 T029 T034 T035 T036 T037 T038 T039 T040 T041 T042 AC61-50677A AC61-00387A AC61-00401A AC97-02608A AC97-02613A 3708-001676 AC41-00130A AC61-00382A AC61-00406A AC33-00019A AC97-02623A AC61-00108A AC66-00106A AC66-00107A AC70-00004A AC61-00392A AC61-00393A AC61-00394A AC66-00105A AC97-02624A AC61-00391A AC97-01652A AC31-00018A AC66-00101A AC66-00102A AC61-00105A AC61-00390A AC97-02570A AC97-02556A AC97-02625A AC66-00094A AC33-00018A AC97-02620A AC97-02563A AC66-00124A AC66-00123A AC66-00115A AC66-00114A AC97-02562A AC61-00107A AC97-02560A AC97-02567A AC97-02568A AC61-00106A AC61-00106A AC66-00104A AC66-00103A AC66-00077A AC61-00389A AC66-00092A AC66-00099A AC70-00003A AC66-00100A AC66-00078A AC97-02557A
Description ; Specification POST-FL CAM GEAR;X-9,SWCH18A,-,L14 SLEEVE-8 GUIDE;X-13,-,-,-,-,-,-,BL POST-#8 GUIDE;X-13,SUS XM-7,2.5,-, ASSY-CAPSTAN BLOCK;-,X-13,Phenol/P ASSY-ACE HEAD BLOCK;-,X-13A,AE Les CONNECTOR-FPC/FFC/PIC;6P,1.25MM,AN PCB-ACE HEAD;TS-10,-,-,-,-,-,-,-,BASE-ACE MAIN;X-13,SECC,T1.2,-,-,N SPRING ETC-ACE;X-13,SWPB,1,-,7.2,HEAD-A/C;HVMXB1016A,-,X13A,-,ASSY-FL BLOCK;-,X-13A,SPRING ETC-FL ARM R;TS-10,SUS304-W LEVER-ARM R;X-13,POM,-,W35,L70,-,N LEVER-ARM L;X-13,POM,-,W35,L70,-,N PLATE-FL ARM;X-11,SECC E20/20,T1.6 PLATE-CASSETTE;X-13,SECC,T0.8,W28, HOLDER-CASSETTE R;X-13,POM,-,W35,L HOLDER-CASSETTE L;X-13,POM,-,W35,L LEVER-LOCK;X-13,SECC,T1.0,W25,L50, ASSY-CYLINDER;6NSJ/6NJ,CX13A-MIRIO PLATE-GROUND DECK;X-13,SPTE,T0.3,ASSY-LOADING MOTOR;SANKYO LOADING MOTOR-LOADING ASSY;-,SCORPIO2(TS-1 GEAR-WORM WHEEL;X-13,POM(M90-44 EQ GEAR-FL CAM;X-13,POM(M90-44 EQU),SPRING ETC-PINCH DRIVE;TS-10,SUS30 PLATE-JOINT;X-13,SECC 20/20,T0.8,ASSY-SLIDER SUPPLY;(PPS),X-13,ASSY-SLIDER TAKE UP;-,X-13,ASSY-HEAD A/C;-,X-13A,LEVER-9 GUIDE;X-13,PPS,-,-,-,-,BRO HEAD-FULL ERASE;-,-,X-13,-,ASSY-UNIT PINCH;-,X-13A,ASSY-POST #8 GUIDE;-,X-13,PI 2.5 REEL-S;X-13,POM,-,BLK,2.5,-,27,REEL-T;X-13,POM,-,BLK,2.5,-,36.5,LEVER-IDLE;X-13,POM,T15,W38,L25,-, GEAR-IDLE;X-13,PET,0.5,54,27,NAT,2 ASSY-LEVER TENSION;-,X-13,SPRING ETC-TENSION LEVER;TS-10,SUS ASSY-BAND BRAKE;-,X-13,ASSY-LEVER BRAKE S;-,X-13,ASSY-LEVER BRAKE T;-,X-13,SPRING ETC-BRAKE;TS-10,SUS304-WPB, SPRING ETC-BRAKE;TS-10,SUS304-WPB, SLIDER-FL DRIVE;X-13,SECC,T1.0,W15 GEAR-JOINT 1;X-13,POM(M90-44 EQU), GEAR-JOINT 2;X-11,POM(K300),-,-,-, BRACKET-GEAR;X-13,SECC 20/20,T0.8, SLIDER-CAM;X-13,SECC 20/20,T1.2,-, LEVER-PINCH DRIVE;X-13,SECC 20/20, HOOK-CAPSTAN;-,-,L10,W10,H10,POM(M LEVER-TENSION DRIVE;X-13,SECC 20/2 GEAR-LOADING DRIVE;X-11,POM(K300), ASSY-LEVER LOADING S;-,X-13,-
Qty S.N.A Remark 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
Samsung Electronics
7-9
Loc.No Part No T043 T044 T046 T048 T049 T050 T053 T055 T057 T071 T072 T073 T074 T075 T076 W015 W016 W018 W019 W201 AC97-02558A 3101-001430 AC66-60051A AC97-02566A AC60-30306A AC66-00111A AC66-00097A AC66-00098A AC61-00386A AC61-00388A AC97-02622A AC61-00397A AC97-02564A AC66-00108A AC97-02569A 6006-001092 6006-001154 6003-001450 6003-000108 6001-001711
Description ; Specification ASSY-LEVER LOADING T;-,X-13,MOTOR-CAPSTAN;-,-,12V,90mA BELT-PULLEY;-,5CM-70,2 * 2,-,71.3, ASSY-GEAR CENTER;-,X-13,FASTENER-WASHER SLIT;-,-,ID2.1,OD5 LEVER-UP DOWN;X-13,POM,T15,E25,L55 LINK-LOADING S;X-13,SECC 20/20,-,T LINK-LOADING T;X-13,SECC 20/20,-,T SLEEVE-TENSION;X-13,-,-,2.5,-,-,-, GUIDE-CASS DOOR;X-13,POM(M90-44 EQ ASSY-HOLDER CASSETTE;SECC+POM+SUS, SPRING ETC-LOCK;X-13,SWP-B,0.25,2. ASSY-LEVER ARM;-,X-13,LEVER-DOOR;X-13,POM,-,W30,L75,-,NA ASSY-CLUTCH;-,X-13,SCREW-MACHINE;WS,PH,+,M3.0,L6.0,ZP SCREW-TAPTITE;WSP,PH,+,M2.6,L5.6,Z SCREW-TAPTITE;PH,+,S,M2.6,L5,ZPC(Y SCREW-TAPTITE;BH,+,B,M2.6,L6,ZPC(Y SCREW-MACHINE;PH,+,M3,L3.3,ZPC(YEL SCREW-MACHINE;PH,+,-,M2,L6,ZPC(YEL BAND-BRAKE SUB ASS'Y;TS-10,WOOL 10
Loc.No Part No S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A S.N.A W010 W011 W012 W012 W212 AK41-00146A AK41-00147A AH31-00025A AK66-00006A AK97-01454A AK97-01106A AH66-00077A AK31-00006A AK61-00362A AK61-00361A 6003-001157 6001-001370 6002-001086 6002-001086 6003-001251
Description ; Specification PCB-DECK;DP-15,-,-,-,-,-,-,-,-,FFC-DECK;DP-15,-,FFC,11,T0.3,MOTOR-LOADING;RF-300EA-1D390,DP-7, PULLEY MOTOR;DP-9,POM ,-,BLK,-,-,ASSY-PU DECK;-,DP-19,LD VE ASSY-SUB DECK;-,DP-16S,SEM GEAR-FEED MOTOR;-,POM M90-44,-,-,MOTOR-FEED;RF-300EA-1D390,DP-9,90M BRACKET-DECK OUTSERT;DP-16,POM,T1. BRACKET-DECK;DP-16,SECC T1.2,T1.2, SCREW-TAPTITE;PWH,+,B,M2,L6,ZPC(YE SCREW-MACHINE;CH,+,M1.7,L3.0,ZPC(Y SCREW-TAPPING;PH,+,B,M1.7,L5.0,ZPC SCREW-TAPPING;PH,+,B,M1.7,L5.0,ZPC SCREW-TAPTITE;CH,+,-,B,M1.7,L3,ZPC SCREW-TAPTITE;PH,+,-,B,M2,L6,ZPC(B SCREW-MACHINE;BH,+,-,M1.7,L2.5,ZPC
Qty S.N.A Remark 0.067 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 4 SNA SNA SNA SNA SNA SNA SNA SNA SNA SNA SA SA SA SA SA SA SA
REMOCON-ASSY CT01 2401-002144 CT02 2203-000192 CT03 2203-000192 LDT01 0601-000519 OP5 QT01 RT01 RT02 RT03 XT01 2007-000029 0501-000534 2007-000881 2007-000593 2007-000102 2802-001094
C-AL;47uF,20%,16V,GP,TP,5x11,5 C-CER,CHIP;100nF,+80-20%,50V,Y5V,2 C-CER,CHIP;100nF,+80-20%,50V,Y5V,2 LED-IR;ROUND,5mm,170mW,4V,940nm,TP R-CHIP;0ohm,5%,1/8W,TP,2012 TR-SMALL SIGNAL;2SC2412K,NPN,200mW R-CHIP;4.7ohm,5%,1/8W,TP,2012 R-CHIP;22ohm,5%,1/8W,TP,2012 R-CHIP;100Kohm,5%,1/10W,TP,1608 RESONATOR-CERAMIC;4.0MHz,0.5%,TP,8
1 1 1 1 1 1 1 1 1 1
SA SA SA SA SA SA SA SA SA SA
ASSY-DVD DECK DSW1 3409-001138 H102 AK61-00360A H103 AK66-00042A H104 AK97-00608A H105 H106 H107 H108 H109 H202 H203 H203 H204 H205 H206 H206 H207 H210 H211 H212 H213 H214 H241 H401 S.N.A S.N.A S.N.A S.N.A S.N.A 6602-001076 AK66-00041A AK66-00045A AK63-00101D AK92-00328A AK73-00005B AH61-50327A AH61-50327A AK66-00043A AK66-00044A AK61-00363A AK61-00363A AK31-00017A AK31-00005A AK97-01453A AK61-00359A AK61-00357A AK66-00057A AK41-00250A AK61-00252A AH97-00448B 0205-001033 0205-001048 AK97-01006A AK97-01071A
SWITCH-DETECTOR;5V DC,1A,DPST,30GF BODY CLAMPER-DISC;DP-16,POM,T0.7,GEAR-PULLEY;DP-15,POM,-,-,-,WHT,-, ASSY-MOTOR LOAD;-,DP-15,BELT-RECTANGULAR;CR,T1.2,4.3%,1.2X GEAR-TRAY;DP-15,POM,-,-,-,WHT,-,-, SLIDER HOUSING;DP-15,POM,-,W17.8,L TRAY-DISC;DP-16,ABS,-,W120,L186.3, ASSY PCB-DECK;DP-15,RUBBER-INSULATOR;DP-15,BUTYL,12, SHAFT-P/U;DP-3,SUS,L84.7,OD3,-,-,SHAFT-P/U;DP-3,SUS,L84.7,OD3,-,-,GEAR-FEED A;DP-15,POM,-,-,-,-,-,-, GEAR-FEED B;DP-15,POM,-,-,-,-,-,-, HOLDER-CAM SKEW;DP-16,POM,-,-,-,BL HOLDER-CAM SKEW;DP-16,POM,-,-,-,BL MOTOR DC-SPINDLE;RF300FA-12350,DPMOTOR-FEED ASSY;-,DP-9,-,-,-,-,-,ASSY-PICK UP;-,DP-19,LD VE HOLDER-CHUCK;DP-16,POM,T3,W140,L96 SPRING ETC-CLAMPER;-,SUS304CSP,-,GEAR-BACKLASH;DP-16,POM,0.5,-,-,WH FFC-PU;DP-17,-,-,23P,-,1mm FRAME-MAIN;DP-15,ABS,-,-,-,T36.3,W ASSY-SUB MATERIAL;DP-7S,-,GREASE;PL-30G,W050030019,GREASE-BEARING;G-754,BRN,1Kg/6 ASSY-HOLDER CHUCK;-,DP-16,ASSY-HOUSING;-,DP-16,COMBO
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 0.5 0.01 1 1
CABLE AC39-00073A I/B AK68-00956C AK68-00956C AK68-00956J AK68-00956J AK68-00956J LEG AC64-80135B P-CASE AK69-00384C AK69-00384C AK69-00384C AK69-00384J AC39-42001J 6003-000275 6003-001375 6003-000277
CABLE-RCA;SJ01-08-099,1.2MT,3P,A/V MANUAL USERS;DVD-V5600,XAX,SPAIN,M MANUAL USERS;DVD-V5600,XAX,SPAIN,M MANUAL USERS;DVD-V5600/XAO,SEM,SPA MANUAL USERS;DVD-V5600/XAO,SEM,SPA MANUAL USERS;DVD-V5600/XAO,SEM,SPA LEG;SV-6000W,PLASTOMER,-,BLK,-,PACKING CASE;DVD-V5600/XAX,XAX,OFF PACKING CASE;DVD-V5600/XAX,XAX,OFF PACKING CASE;DVD-V5600/XAX,XAX,OFF PACKING CASE;DVD-V6600/XAX,SW2,OFF CABLE-RF ASSY;-,-,#1365,1200mm,3A, SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC( SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(YE SCREW-MACHINE;TH,+,-,M4,L12,ZPC(YE
1 1 1 1 1
SA SA SA SA SA
2 1 1 1 1 1 4 7 5 4
W252 AC60-12126A
7-10
Samsung Electronics
8. Block Diagrams
8-1 All Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2 8-2 U5 (Motor Driver IC) Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3 8-3 U4 (SDRAM) Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-4 8-4 U1 (Flash Memory) Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-5 8-5 U3 (Decoder IC) Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-6
Samsung Electronics
8-1
Block Diagrams
Component
Disk Motor
Feed Motor
Super
U4 8MB SDRAM
Video IN U7 (TC74VHCT125) Level Shifter IC601 (MN101D10F) VCR Main Micom IC603 EEPROM
(DT701)
8-2
Samsung Electronics
Samsung Electronics
VM2
SVCC
OUT5
10K
VM2
IN5 4
10K Level Shift SVCC
27 DO5+
28 DO5-
24 VM2
VM2
OUT4 IN4 6
10K
10K
25 DO4+
Level Shift
SGND 8
26 DO4-
OUT3 20 IN3 21
10K
FIN
FIN
TSD
13 DO3+
Level Shift
14 DO3-
SVCC VM1
16 DO2+
15 DO2MUTE 23 CH2,3,4,5
SVCC SVCC
18 DO1+
Level Shif
17 DO1-
Block Diagrams
8-3
Block Diagrams
I/O Control
LWE LDQM
Output Buffer
Row Decoder
Row Buffer
DQi
Address Register
CLK ADD
LRAS
LCBR
LCKE LRAS LCBR LWE LCAS Timing Register notice. CLK CKE CS RAS CAS
WE
L(U)DQM
8-4
Samsung Electronics
Block Diagrams
Input/Output Buffers
WE BYTE RESET
State Control
Command Register Program Voltage Generator Chip Enable Output Enable Logic STB Data Latch
CE OE
STB
Y-Decoder
Y-Gating
Cell Matrix
A18 to A 0 A-1
Samsung Electronics
8-5
Block Diagrams
SDRAM
OBD/ Mixer
Video Processor ( Scaling ) Sub-picture Decoder
32- b it bus
BUS Interface
Bus Bridge
32-bit APB
16 bit Timer
SCR Timer
Ext M I/F
UART
JTAG
Flash ROM
Debugger
EEPROM
RS-232C
8-6
User I/F
Mic in
OSC
GPIO
PLLs
IIS In
WDT
SPI
IIC
Samsung Electronics
9. Wiring Diagram
CN 101
GND TXD SRQ RXD RRQ SCLK MRST ZERO R ZERO L DVD COAX PC 5V PC 5V-2 AUDIO-R GND AUDIO-L PC 9V CVBS PC 3.3V SUPER_Y SUPER_C GND Y Pb Pr CN 4
7 8 9 10
7 8 9 10
Samsung Electronics
9-1
Wiring Diagram
MEMO
9-2
Samsung Electronics
Samsung Electronics
10-1
PCB Diagrams
10-2
Samsung Electronics
PCB Diagrams
CONDUCTOR SIDE
V-OUT
A-OUT
ENV
HD SW
CTL
Samsung Electronics
10-3
PCB Diagrams
CONDUCTOR SIDE
IC301 IC501
IC601
10-4
Samsung Electronics
PCB Diagrams
Samsung Electronics
10-5
PCB Diagrams
CONDUCTOR SIDE
10-6
Samsung Electronics
PCB Diagrams
CONDUCTOR SIDE
Samsung Electronics
10-7
PCB Diagrams
MEMO
10-8
Samsung Electronics
Note
have the special characteristics for safety. When replacing any of these components.
Samsung Electronics
11-1
Schematic Diagrams
Audio Block
AV Block
A/V Block
Hi-Fi Block
Logic Block
I/O Block
11-2
Samsung Electronics
Schematic Diagrams
Samsung Electronics
11-3
Schematic Diagrams
11-4
Samsung Electronics
Schematic Diagrams
Samsung Electronics
11-5
Schematic Diagrams
11-6
Samsung Electronics
Schematic Diagrams
Samsung Electronics
11-7
Schematic Diagrams
11-8
Samsung Electronics
Schematic Diagrams
Samsung Electronics
11-9
Schematic Diagrams
U3-75
U3-76
U3-78
These are the waveforms of DVD-V5600/ V6600. Caution) There can be some differences (Voltage, Frequency, stc.) among cameras.
11-10 This Document can not be used without Samsungs authorization Samsung Electronics
Schematic Diagrams
Samsung Electronics
11-11
Schematic Diagrams
Video
Audio
11-12
Samsung Electronics
Samsung Electronics
12-1
Operating Instructions
12-2
Samsung Electronics
Operating Instructions
Samsung Electronics
12-3
Operating Instructions
12-4
Samsung Electronics
Operating Instructions
Samsung Electronics
12-5
Operating Instructions
12-6
Samsung Electronics
Operating Instructions
Samsung Electronics
12-7
Operating Instructions
12-8
Samsung Electronics
Operating Instructions
Samsung Electronics
12-9
Operating Instructions
12-10
Samsung Electronics
Operating Instructions
Samsung Electronics
12-11
Operating Instructions
MEMO
12-12
Samsung Electronics
1) Analysis RCC (Ringing Choke Converter) IC Peak Current (Icp) when Q1SR12 is on: T Po Icp = 2 X Ton X Vin e, (e: efficiency) Maximum Icp when duty is 50%: Po Icp max = 4 X lin avg = 4 X Vin X e P1 impedance Lp: Vin X Ton Icp
Lp =
The time to supply reserved energy in transformer to output: L1 n2 T Off = Vo X n1 X Icp Output Voltage Vo: T on n2 Vo = Vin X T Off X n1 Applied Voltage to S/W TR Vce: n1 Vce = Vin + n2 X Vo
13-2
Samsung Electronics
2) Description on Each Circuit Block A. INPUT RECTIFYING CIRCUIT AC 120V-60Hz is rectified by bridge diodes (D1SS01, D1SS02, D1SS03, D1SS04), and then leveled by smoothing capacitor (C1SD11). To remove conduction noise line, filter (L1SS01) and X-capacitor (C1SS01) are used.
Fig. 13-4 Input Rectifying Circuit B. DRIVE CIRCUIT When Vin is applied, ignition current Ig flows through R1SR02. Ic (value =Hfe x Ig) starts to flow in Q1SD11 and Vb is induced to base coil B. By this Vb, Ib starts flowing and Q1SD11 becomes saturated (S/W on). While Ib remains at constant value, Ic increases gradually by time. Base current will decrease and then Q1SD11 will become cut off (S/W OFF). PT1SD1 D1SS08
R1SR02 C1SS07
Q1SD11
R1SR03
R1SR04
C1SR12
Samsung Electronics
13-3
C. CONTROL CIRCUIT If output current (Io) and (Vin) were constant, Vo could have the same value as the secondary coil ratio(N2/N1) proportion. However, it actually varies. So, to stabilize Vo, scorpio chassis SMPS adopts direct negative feedback control system using a photocoupler. The following are line voltage regulation and load regulations on Io variations. PT1SD1
D1SR11
R1SD01
R1SD06
R1SS04
R1SS03
C1SS11
IC1SS2 R1SS05
Fig. 13-6 Control Circuit D. LINE VOLTAGE REGULATION Assume load (Io) is constant to analyze control function on voltage variation. Po = Io x Vo : Constant Input power (Pi) is constant and Po is constant. Pi = Vin x Ii : Constant However, as Vin actually varies, Ii should vary as much as Vin varies to make the total input power (Pi) constant. Ii is an average value of collector current (Ic) in Q1SD11 and only flows when S/W is on. So, the variation of Ii can be controlled by the variation of Ic. The only way to change Ic is by changing the time (Ton) to turn on S/W TR (Q1SD11).
13-4
Samsung Electronics
Fig. 13-7 Waveform of Line Voltage Regulation As Vin increases, Toff becomes constant and Ton gets decreased. T1 = T2 = T T Off 1 = T Off 2 T On 1 = T On 2 + T1 E. LOAD REGULATION Assume that the line voltage (Vin) is constant to analyze the control function on the load (Io) variation. As Io varies, Po varies accordingly. Po = Io x Vo : Variable As Po varies, input power (pi) should vary the same amount. Pi = Vin x Ii : Variable (Po = Pi x e, e : efficiency) As Vo and Vin are constant, Ii will vary in proportion to Io variation. As mentioned above, Io is the average value of IC only when S/W TR (Q1SD11) is off and this current (Is) is the average value of IC only when S/W TR is on. This current (Is) is proportional to IC. The variation of Is and Ic can only be controlled by variation of Toff and Ton of the SW TR.
Samsung Electronics
13-5
Fig. 13-8 Waveform of Load Regulation As Io increases, Toff and Ton increase also. (Frequency gets low)
Ton2 = Ton1 + T1 Toff2 = Toff1 + T2 In actual control circuit, as shown in Fig.6, photocoupler (IC1SS1) controls base current of TR (Q1SR12), then, Ton and Toff of S/W TR (Q1SD11) are controlled to perform both line regulator and load regulator functions. The variations of line voltage (Vin) and load (Io) are found in variation of Vo. R1SS34 Vs = R1SS33 + R1SS34 Reference voltage in IC1SS2 (shunt regulator, S431) varies. As Vo gets high, Vs increases and then cathode voltage (Vc) of IC1SS2 is made low. Increased forward current (If) makes collector current (Ipc) flow to control base current of TR (Q1SR12). Q1SR12 becomes saturated and Q1SD11 is cut off because base current in S/W TR (Q1SD11) is divided to make collector current (IC1SS2) in Q1SR12. When Vo becomes low, negative feedback can be performed to regulate Vo.
13-6
Samsung Electronics
3) Output Rectifying Circuit D1SS08 becomes forward biased only when S/W TR (Q1SD11) is off. In this case, Is flows through D1SS08. DC voltage can be made by rectifying Vs through D1SS08 and is passed through the LPF of C1SS07 and L1SS03. D1SS08
PT1SD1
L1SS03
C1SS07 C1SS10
Samsung Electronics
13-7
4) Snubber Circuit During Transformer Operation, leakage inductance exists in addition to normal inductance of primary and secondary coils. Assume that there is no leakage inductance (L1), when S/W TR (Q1SR02) is OFF. n1 Vce = Vin + n2 Vo In other words, Vce is the same as supplied Vin pulse induced by the voltage of Vo, but leakage inductance (L1) exists. n1 dis Vce = Vin + n2 Vo + L1 dit At this time, unless the voltage induced by L1 is suppressed, S/W TR (Q1SR02) will be destroyed because Vce exceeds its specification. To prevent this, Snubber circuit is constructed by using R1SS01, R1SS02, C1SR03 and D1SS05. To supply reserved energy in transformer to output (Toff), the voltage induced by L1 is passed through D1SS05 and charged in C1SR03, then discharged through R1SS01, R1SS02. Finally, it is discharged as heat in R1SS01, R1SS02.
D1SS08
C1SS07
C1SR12
5) Protection Circuit in Open Loop This chassis SMPS applies direct negative feedback control using a photocoupler. If this photocoupler can not function due to defect of relevant circuit components, it becomes an open loop. When this occurs, output voltage surges three times faster than normal and then causes critical defects in VCR unit. To prevent this, the protection circuit is implemented to maintain holdback by stopping switching in case of open loop. In open loop, VOI increases to over 50V and this over voltage is applied to ZD1SS1. This surge will cause the zener to avalanche, thus shorting. In this case, no voltage is applied to the Vb. No base current flows in S/W TR(Q1SD11) and then it enters the hold-back mode. In this case, ZD401 can not function normally.
Q1SD11 R1SR03 R1SR04 C1SS12 C1SR12 ZD1SS1 UZP43B (43V) ZD401 UZP33B (33V)
Samsung Electronics
13-9
LED DISPLAY
DVD BLOCK
A/V IC
IIC COMMON
Hi-Fi/MTS
EPROM IC
SERVO BLOCK
I/O IC801
TM BLOCK
(1) Outline
The system control circuit inputs the commands given by the operator to set the mechanism and circuit to the commanded mode. The circuit also inputs the detected output from the tape and mechanism protection sensor and protects the VCR and tape against abnormal operation. Fig. 13-14 is a simplified system control block diagram. The system control is performed by 4 control sections. (System and timer control, Servo control, F/S Tuner, On Screen Display).
13-10
Samsung Electronics
Samsung Electronics
13-11
FUNCTION-TIMER OPERATION MODE DISPLAY AND KEY MATRIX <u-COM> SYSTEM CONTROL/ OSD SERVO BLOCK DFG,DFG CFG CAPSTAN MOTOR ASSY (3 in 1)
LOADING MOTOR
LOADING GEAR
Fig. 13-16 The Relationship Between u-COM, Capstan, Cylinder and Loading Motor
13-12
Samsung Electronics
Samsung Electronics
13-13
13-14
CN1 + HU HV HW R2 C11 C9 M.R(360PPR) C10 + +
C1
C2
PIN# 1 2 3 4 5 6 7 8 9 10 11
FUNCTION C FGOUT C Vco1(B+) C Vcc(5V) C F/R C I-LIM C M/T-GND C S-GND D/L Vco2(B+) C-VCTL L L-IN D PG-FG OUT
R3
LB11885 (48-SS0P)
R4
1 2 3 4 5 6 7 8 9 10 11 12 HVHV+ HWHW+ CFG(D) Vcc(5V) CFG(A) CFG(IN) I-LIM F.C PWM S-GND GND 48 47 46 45 44 43 42 41 40 39 38 37
HU+ HUF/R VCO (B+) RFS RFP M/T-GND W-OUT V-OUT U-OUT LD-L2 LD-GND
GND
C13
R5 C3 C7 C6 C12 C5
C4
12 PIN# 1 2 3 4 5 6
R8
D-VCTL
CN2
13 14 15 16 17 18 19 20 21 22 23 24 LD-VREG V-CTL D-BFG D-PGO2 D-CTL LD-IN D-C1 D-C2 D-F.C D-CX D-VCOIN D-PCOUT 36 35 34 33 32 31 30 29 28 27 26 25
LD-VCO LD-LI D-UOUT D-VOUT D-WOUT D-RS D-MCOM D-VCO D-M/T GND D-PGO1 D-PGIN+ D-PGIN-
FUNCTION D PG+ D PGD M/T-GND D M/T-COM D W-OUT D V-OUT 7 8 9 10 11 D U-OUT N.C LD OUT-1 N.C LD OUT-2
Fig. 13-17 Loading Motor + Capstan Motor + Cylinder Motor Block Diagram
R6
C17
Samsung Electronics
Samsung Electronics
13-15
13-16
Samsung Electronics
65
R604
R603
2
R601
R602
Samsung Electronics
13-17
74 75
13-18
Samsung Electronics
Samsung Electronics
13-19
SPEED& PHASE
13-20
Samsung Electronics
Samsung Electronics DPG comparator DPG signal DFG amplifier DFG signal Speed error detection Kv (Drum speed gain) Phase error detection Kp (Drum phase gain) Phase detection Kp Digital filter Bias value addition PWM conversion Motor driver (Capstan phase gain) Speed error detection Kv CFG amplifier CFG signal Carrier rejection filter Digital filter Carrier rejection filter Capstan motor M Digital filter Digital filter PWM conversion Motor driver M Drum motor Remark The broken line indicates the internal processing of the MICOM
Circuit Operating Descriptions
HSW generation
RECCTL generation
RECCTL head
PBCTL amplifier
13-21
13-22
Samsung Electronics
Samsung Electronics
13-23
34
CCD
LPF
3 MHz LPF
VIDEO OUT 26
21
clock data
CLAMP
22
chip select 55
REC COLOR
73
SP H'D
66
SLP H'D
IC301
LA71207M
Fig. 13-21 Luminance Record Process 1) Outline Fig. 13-21 shows the video signal recording system. Line input signal or tuner input signal is selected by Micom. Input selection is done with the INPUT SELECT button on the remote. The input select control signal is supplied to the pin 53(clock),54(data),55(chip select) of video IC from Micom IC. The selected video input signal goes to pin 28(TUNER),30(LINE 2),32(LINE 1) of Luma/Chroma processor IC (IC301). And then it enters VIDEO AGC circuit. The gain of AGC circuit is controlled by AGC detector so that the output is constant (approx. 2Vp-p). The output signal of AGC is clamped by the FBC(Feed Back Clamp) circuit. This signal appears at pin 26, after being amplified at the internal video amp and driver. The output signal from the clamp circuit enter the detail enhancer circuit. In the detail enhancer circuit, the low level high frequency video signal is emphasized to improve the original signals frequency characteristics. onlinear emphasis circuit is employed to improve S/N and frequency response characteristics together with the following main emphasis. Noise effects the FM wave at a higher frequency, so the S/N can be improved by emphasizing the higher frequency before recording and by suppressing the play signal during demodulation. The difference of non linear emphasis from main emphasis is that the emphasis characteristics change is depending on the input level. The gain of the emphasis circuit is inversely proportional to the level of the high frequency component of the signal. That is, if the high frequency portion of the signal is low the main emphasis circuit will amplify the signal.
13-24
Samsung Electronics
2) Main Emphasis Circuit The dynamically emphasized luminance signal is now supplied to the main emphasis circuit where all the high frequency components of the signal are boosted more than the low frequency components. The boosting action is required for the high frequency components because in the FM recording method, the noise of the playback signal increases in proportion to the modulated signal frequency or low level signal. By using the nonlinear emphasis and main emphasis system, the total S/N ratio is increased. The output of the main emphasis circuit is then supplied to the white and dark clip circuit. 3) White and Dark Clip Circuit After emphasis is performed, large overshoots and undershoots in the luminance signal are limited to a specified level. This is done to avoid FM over modulation. The output of the main emphasis circuit is then supplied to the FM modulator circuit. 4) FM Modulator A. The amplitude of the FM signal is limited, so the signal is recorded on tape near the maximum record level which increases the S/N ratio. B. The FM carrier is se to 3.4MHz (at the Sync tips) and the deviation to 4.4MHz by inside IC circuit (for the white peak). The actual device which constitutes the FM modulator is a stable multivibrator. This multivibrator generates a sine wave output of variable frequency. The frequency of sine wave is governed by the level of the processed video signal at any given point. Therefore, the processed video signal varies the frequency of the sine wave which is frequency modulation (FM). During playback in SLP mode, the crosstalk of the adjacent track is more apparent than is standard mode. It appears as jitter and noise on the monitor. To reduce this noise from the screen, the FM carrier frequency has to be 1/2fh shifted up during recording. This is done by applying the head switching pulse to the FM modulator control pin57 during SLP recording. The FM modulated luminance signal goes to record equalizer circuit and it is mixed with chrominance signal at the record Amp circuit inside video IC. 5) Record Amp The frequency modulated luminance signal and chroma signal are mixed in the record amp of pre-amp block inside video IC. Then this mixed signal is amplified and supplied to the video heads via the rotary transformer and recorded on the magnetic tape. Tape speed selection determines which video heads will be used. That is, signal output from pin 66 (SLP) and 73 (SP) of pre-amp block are supplied to video heads. Control signal of speed mode is applied to pin 53(clock), 54(data), 55(chip select) of video IC from Micom IC.
Samsung Electronics
13-25
DOUBLE LIMIT
PB FM-EQ
21 91
CLAMP
22 91
NL DEEMPHA
34 91
H'D S/W 57 H'D AMP S/W 58 26 VIDEO OUT 6dB AMP QV/QH F.B CLAMP NOISE CANCELL Y/C MIX PICTURE CTL CCD 39 91
IC301
LA71207M
Fig. 13-22 Luminance Playback Process 1) Outline The video signal recorded on the tape is picked up by CH1,CH2 head and is supplied to pre-amp block via rotary trans. During playback, as per the speed, SP and SLP head is determined by Pin60 of respectively. CH1 signal inputs to Pins 65 and 74 while CH2 signal inputs to Pins 67 and 72 of video IC. The pick up operation is controlled by the head switching pulse inputted to pin 57. During the high portion of the switching pulse, CH2 is picked-up and just the opposite is true for CH1. In the pre amp IC, the FM signal is amplified 60dB and this signal is applied to FM AGC. 2) FM AGC AMP At the FM AGC Amp (FM), signals are automatically balanced. One of the AGC circuit outputs is fed to AGC detector circuit which detects signal level fluctuations. The detector output signal is applied to the FM AGC Amp to keep the output constant.This output is applied to the PB FM EQ block. FM EQ is correct the phase distortion and level. The signal through PB EQ circuit is applied to the double limiter. 3) Double Limiter Circuit A FM signal on the tape which contains AM components will be read during playback. If there is a severe AM component, a drastic drop in FM carrier can occur. This lack of FM carrier can be called a noise region. Double limiting is used for improving the S/N ratio and carrier loss. The playback FM signal is split into two paths, one goes to high pass filler and sub-limiter. The other goes to the main-limiter after passing through a LPF. ONE path of the FM signal goes to the high pass filter, so that the low frequency(AM) component can be removed, and the other carrier is supplied to the sub-limiter. The output signal of sub-limiter is mixed with the signal from the low-pass filter and sent to the FM demodulation circuit.
13-26
Samsung Electronics
4) FM DEMODULATOR The FM demodulator consists of a stable mono multivibrator balanced modulator (BM) and a LPF. The FM demodulator circuit first converts the FM signal to a pulse width modulator signal. Then the circuit smoothes the PWM signal to demodulate the video signal. This demodulated signal is fed to the LPF to remove its FM carrier component and any other harmonics. The demodulated luminance signal outputs from Pin 21 and is applied to the 3MHz LPF through main deemphasis circuit. To reduce demodulation noise, the output of the 3MHz LPF is applied to a non-linear deemphasis circuit through YNR circuit. 5) Main De-emphasis Circuit Before modulation, main emphasis was performed. Because the high frequency components of video signal were boosted more than the low frequency components in the recording mode, main deemphasis must be performed to obtain a normal video signal. That is this circuit returns the emphasized high frequency component to the original value. 6) Non Linear De-Emphasis Circuit This circuit is the counter part of the dynamic pre-emphasis circuit during recording. The characteristics are also the opposite of those in recording. 7) Drop Out Compensator/YNR Circuit This circuit compensated for missing parts of the FM signal due to dust, dirt on the tape or irregular tape coating, etc. The clamped video signal is supplied to the CCD 1H circuit. The 1H delayed video signal from CCD block is also supplied to the 6MHz LPF to reject the sampling noise of CCD IC. Then, the output of LPF is applied to Pin 34 of video IC. When the DOC detector detects the FM loss, a 1H delayed video signal is added in place of the missing signal. 8) Noise Canceller Circuit The noise canceller circuit removes the high frequency noise contained in the video signal which has the reverse characteristics of the detail enhance in the recording mode. The output of the noise canceller circuit is supplied to the Luminance and Chrominance mixer circuit. The mixed chroma and luminance signal are then output at Pin 26.
Samsung Electronics
13-27
LINE1-1N LINE2-1N
1MHz LPF
MAIN CONVERTER
BURST EMPHA
ACC AMP
+ REC LUMINANCE 69 70
73
SP H'D
66
SLP H'D
IC301
LA71207M
Fig. 13-23 Chrominance Record Process 1) Outline Fig. 13-23 shows the chroma signal recording system. The chroma signal recording process is performed by video IC. The input video signal is fed to Pin 28 of IC and supplied to Y/C COMB circuit through AGC AMP. The output signal of Y/C COMB circuit is applied to ACC amplifier. The ACC amplifier is used for both burst ACC which keeps the burst level at a constant value in recording and the color ACC which controls the reference level of the burst ACC with the color signal level. The color ACC works to maintain a relatively high output level by boosting low level input signals to improve color S/N ratio. The signal is then applied to the burst emphasis circuit. Burst emphasis emphasizes the burst signal by +6dB during recording and feeds it to the main converter. The 3.58MHz signal are mixed in the main converter to perform frequency conversion. The main converter is a mixer having the two types of output components which are the added frequency of 4.21+3.58=7.8MHz and the difference frequency component 629KHz. Added frequency is rejected by the 1MHz LPF and the 629KHz down converted chroma signal is supplied to the luma/chroma mixer of pre-amp block and then recorded on the tape via the record amp and heads. AFC detection is performed with the head switching pulse and the fh signal generated from 321fh VOC output. The detector output controls the VCO frequency which will be locked precisely at 320fh (5.035MHz). he 320fh signal is counted down to 1/8 and the resultant 40fh (=629KHz)carrier signal is phase shifted triggered by each horizontal sync signal which is wave shaped as a 50% duty pulse by the pulse generator. The direction of the rotational phase shift depends on the levels of the rotary head switching signal from pin 57 and when the switching signal is "H" level, the phase is retarded by 90 degrees for every 1H, and when is is at a "L" level it will advance by 90 for every 1H this 40fh phase shifted sub-carrier (PSSC) signal enters the sub-converter and the 3.58MHz carrier signal is locked at the color burst frequency by the record APC. The PSSC signal is frequency converted into 3.58MHz +/-629KHz. Then 4.21MHz component (=3.58MHz+/629KHz)is extracted through a 4.2MHz BPF. The 4.21MHz signal is used as a carrier signal for down conversion of the color signal as described previously.
13-28
Samsung Electronics
2) ACC (Automatic Color Gain Control) Circuit The ACC is used as burst ACC in the LP mode, however it is also used for peak ACC in the SP/SLP mode. The purpose of using two different ACC operations is to improve the overall Chroma S/N ratio during playback. In SP and SLP, there is H-sync alignment. This indicates that there is bust alignment as well. Whenever two video tracks overlap or a video head picks up crosstalk from an adjacent track, beats are produced during playback. Perhaps the most noticeable beats are produced by H-sync and burst. But in SP and SLP, these beats occur right at H-sync and burst and are out of the picture. In LP, however, there is no H-sync alignment and these beats can be seen in the picture. To keep the beats at a minimum in LP, we keep the burst level constant so that the beat intensity is constant. We know that ACC acts to improve the color S/N,and in LP, the ACC detector locks at the burst level,and keeps it constant. Thus we have ACC operation with the least beats. In SP and SLP, the beats caused by burst overlap are out of picture, so we don't really mind if the burst level changes or not. To improve the color S/N ratio even more,we use peak ACC in SP and SLP.That is,if the chroma level is too low to record, the amplification degree is increased by 3dB. However, the chroma level is sufficient for recording, this peak ACC is changed to burst ACC to avoid over amplification. By changing the ACC according to picture color content, the burst level may vary. The color ratio improvement is based on the color content itself during SP and SLP provides a somewhat better S/N ratio. 3) Four (4) Phase Rotation CH1 is advanced 90 every channel, while CH2 is delayed 90. When the frequency is set to 629KHz, if phase is shifted by +/-90 it becomes 629KHz +/-90. The 40fh+/-90 (=629KHz +/-90)is balanced modulated via fsc (3.58MHz) depending on which side band is detected. That is, the fs +40fh+/-90 (4.2MHz +/-90) of total frequency is supplied to the main converter. In record mode, the signal operates same as in play back mode. During playback, the phase is returned to original state. 4) AFC (Automatic Frequency Control) Circuit Luminance signal is input to H-sync separator. The H-sync is separated and supplied to phase comparator. This signal can be described as fh (Horizontal Sync frequency of input video signal). However, VCO oscillates at 320fh (5.035MHz). This 321fh is counted down by 1/8 and 1/40 and resultant fh is supplied to phase comparator. fh and fh are supplied to the phase comparator for comparison of their phases. After comparison, the phase differences is output to VCO (320fh) in terms of error voltage. Therefore, the oscillation frequency of VCO is controlled by this error voltage. That is, if the fh phase is changed by H-sync signal fh, error voltage is changed accordingly and if the phases of fh and fh are met due to change of VCO oscillation frequency, error voltage does not feedback. 320fh VCO is oscillated in accordance with phase sync at fh. Therefore, 40fh input to sub converter by phase shift is always sync horized with phase. The AFC loop performs the same operation during record and playback. In recording, phase of VCO is in accordance with H-sync signal of current video signal. Which in playback, the phase sync of VCO is consistent with H-sync signal which is separated from the video signal.
Samsung Electronics
13-29
74 91 73 91 72 91
AMP
AMP
ACC AMP
MAIN CONV
67 91 66 65
BURST DE-EMPHA
AMP
3.58MHz BPF 1
CCD
PB AMP
Y/C MIX
IC301
LA71207M
Fig. 13-24 Chrominance Playback Process 1) Outline Fig. 13-24 shows the chroma signal playback system. The FM signals picked up by the CH-1 and CH-2 video heads are supplied to the pre-amp block. The FM signal from CH-1 and CH-2 are alternately selected by the switch and output signal as a continuous signal. Goes to the ACC amp through the 1.3MHz LPF. The 1.3MHz LPF is used for passing only down converted 629KHz chroma signal in the playback mode. The ACC amp stabilizes the 629KHz color signal level. The output color signal from amp then enters the main converter circuit. In the main converter circuit this signal is mixed with the 4.21MHz phase shifted carrier signal and converted into 4.21MHz + 629KHz signals. 2) Main Converter Inside of IC, the main converter converts the 629KHz rotational chroma signal to a 3.58MHz non-rotational signal. The two inputs of this main converter are the 629KHz signal, which comes from the output of the ACC, and a 4.21MHz which has the same rotational phase as the 629KHz signal. It is important that the rotational phase of the 4.21MHz signal is the same direction as the 629KHz playback chroma signal. To obtain the 3.58MHz non-rotational stable signal, the same direction rotational signal should be mixed with the rotational chroma signal. During the conversion process, the phase is also mixed by the frequency. Therefore, when 629KHz is subtraced from 4.21MHz,the result is the non-rotational 3.58MHz stable signal. The output signal of the main converter goes to the 3.58MHz BPF. In the 3.58MHz BPF,the conversion noise(4.21MHz+629KHz=4.8MHz) is rejected and the 3.58MHz color signal goes to the comb filter. In the comb filter, the crosstalk components due to the adjacent track are eliminated and the color signal is applied to PB-AMP, BURST De-Emphasis, Killer and are applied to LUMA and CHROMA mixer input through the CNC block.
13-30
Samsung Electronics
BPF fh fs + 40th = 3.58MHz + 0.62MHz = 4.2MHz fs VC0 320fh 320fh = 5.03MHz fh = 15.734 KHz 1/8 D/C 40th = 629KHz SUB CONV ( + ) fs = 3.579545MHz XTAL OSC
Fig. 13-25 Block Diagram of Color REC mode by the method of a Down Converter
BPF fh fs + 40th = 3.58MHz + 0.62MHz = 4.2MHz fs VC0 320fh 320fh = 5.03MHz fh = 15.734 KHz 1/8 D/C 40th = 629KHz SUB CONV ( + ) fs = 3.579545MHz XTAL OSC
Fig. 13-26 Block Diagram of Color PB mode by the method of a Down Converter
Samsung Electronics
13-31
LINEAR OUT 6
INPUT
IN SEL
ALC
LPF
PNR
MOD
REC AMP
26
REC FM
LINE 80 OUT
INPUT
PRE AMP
33
34
BPF
DEMOD
LPF
PNR
13-32
Samsung Electronics
Samsung Electronics
13-33
13) SW Noise Compensation Unlike the linear audio,insted of using fixed head,drum heads are used,which creates halting points However,in order for the audio to be headed continuously,the damages from halting points are modulated,which creates noise. SW noise compensation is a block to minimize this particular noise. 14) Hold Pulse It makes standard signal(Pulse) to compensate SW noise. 15) DET(Hi-Fi/LINEAR) From the Hi-Fi envelope inputed from pre-amp,it decides whether the signal passing through L-CH BPF is Hi-Fi or LINEAR tape its size(the signal passing through BPF is below 10mVpp, it is not Hi-Fi,therefore,it output linear) 16) DOC(Drop Out Compensation) If demodulation is conducted without properly treating the damage on Hi-Fi envelope caused by scratch on the tape,noise occurs. In order to improve this noise occurrence,DO DET compensate the drop-out using the same methode of compensating the switching noise when the damage on the envelope ranges 10~15mVpp. 17) ENV DET To obtain optimal tracking,envelop must be peak to peak and micom should be in DC. It is a function to convert Hi-Fi envelop to DC. If it is lower than 0.8V at micom,it sends linear mode date to HiFi IC. 18) Serial Data Decoder It receives IIC BUS to enable the operation of inner block and decodes into serial data.
13-34
Samsung Electronics
(3) Pin Port Description (Tuner Mode ; 1KHz, 100% Modulation Input)
PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PIN NAME LINE MUTE Linear out to TM Vcc 9V Linear Input Vcc 5V Linear out ti A/V EXT1-INPUT (L) ALC Detector EXT2-INPUT (L) GND EXT3-INPUT (L) Monitor Input (L) Input changeover switch output (L) ALC Input (L) Vcc 5V 1/2 Vcc Rec Mute Terminal NR Waiting Det NR Waiting Filter NR Waiting Filter CCA Reference NR Empha Tracking DC out Audio Pb FM1 GND REC Current OUT Audio Pb FM2 Crrent adjust Alc detector Hi-Fi detector Monitor Vcc 5V Pb FM Out Pb FM Input GND Vcc 5V Serial data input Serial clock input Audio head s/w Mts Mode out 5V 0/5V 0/5V 0/5V Head s/w 30 hz input 1V : mo / 2V : St / 3V : Bi 2.5 V 5V 2.5 V 350 mVp-p 2V/4V 2.4 V 0~5v 2V/4V DC VOLT. 0/5 4.2 V 9V 2.5 V 5V 2.5 V 0 0 0 2.5 V 2.2 V 2.5 V 5V 2.5 V 0V 2.5 V 2.5 V -21 dBV -21 dBV -28.2 dBV Line Input 3 ( DVD ) DVD Audio (L) Input PB/REC sitch output . Transform R/P signals into DC. ALC Input Terminal Power Supply for in/out Select 1/2 Vcc Terminal GND ( Not in use ) Terminal for waiting dector NR Waiting Filter 1 For L-CH NR Waiting Filter 2 For L-CH CCA Reference for L-CH NR Empahasis for L-CH Hi-Fi Env Det Level Output Audio Playbak FM 1 input ( H ) Hi-Fi PRE-AMP GND Rec current out to Head Audio Playbak FM 2 input ( L ) Rec Current adjust point ALC detection Hi-Fi/ Normal detect FM Monitor Power Supply for Hi-Fi Output of HD Amp in PB Mode Input of FM in PB Mode GND FOR LOGIC Power Supply for LOGIC -28.2 dBV -21.5 dBV -28.2 dBV - 28.2 dBV SIGNAL -17 dbm Reduce the line out noise. Converter Model Only Power Supply for in/out Select Audio from A/V IC Power Supply for in/out Select Audio out to A/V IC Line Input 1 ( FRONT ) ALC Detector for RF converter Line Input 2 ( REAR ) REMARK
Samsung Electronics
13-35
PIN NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
PIN NAME CCA Reference NR Empha NR Waiting Filter NR Waiting Filter NR Waiting Det Vcc 5V ALC Input (R) Input changeover switch output (R) Mute Control GND FSC IN DC Reg Stereo PLL filter Vcc 5V Pilot Canceller f FM Filter SIF Input REG Filter Filter Auto Adjust Pilot Det Filter PC_DC_MO PCDOUT PCDIN PCDBXIN Main V/I convert SPE Det V/I convert Spectral DET Wide Band Det EXT1-INPUT (R) GND EXT2-INPUT (R) Wid det V/I convert EXT3-INPUT (R) Monitor Input (R) PCDCOSPE PC_OUT_DBX LINE MUTE ( R ) Line out (R-CH) GND Line out (L-CH)
DC VOLT.
REMARK
NR Waiting Filter 2 For R-CH NR Waiting Filter 1 For R-CH Terminal for waiting dector Power Supply for in/out Select ALC Input Terminal PB/REC sitch output . Transform R/P signals into DC. GND FOR ANALOGE 200 mVp-p 3.58 Mhz input Bandgap Power supply for MTS LPF for Stereo PLL Power Supply for MTS Select CTL Pin of cancel signal for pilot C. Filter for making stable dc SIF Audio input from TM Block
Filter of reference voltage source. Loof filterof PLL for auto adj Detection for pilot detection circuit Absorbing the DC offset Absorbing the DC offset Absorbing the DC offset Absorbing the DC offset Converting the voltage of signal Connecting pin of smooth capacity of detection circuit. Converting the voltage of signal Connecting pin of smooth capacity of detection circuit.
Line Input 1 ( FRONT ) GND FOR MTS Line Input 2 ( REAR ) Converting the voltage of signal Line Input 3 ( DVD ) DVD Audio (R) Input Absorbing the DC offset Absorbing the DC offset
13-36
Samsung Electronics
OUTPUT
LPF 12KHz
OSD
REC AMP LINE AMP
R/P HEAD
S/W
PB ON
E/E
PB
PB AMP PB ON
REC ON
INPUT
ATT
ALC
Samsung Electronics
13-37
5) PB AMP
PB AMP OUTPUT
INPUT
The diagram to the left is the playback amp and the gain input/output are as follows. Av = 1 + Z1 ~ Z1 ~ Z2 Z2
Z1 Z2
The playback characteristic of VHS format can be satisfied by using Z1, Z2 in the above equation. PB amp gain should be designed to be approximately 45dB (1KHz).
The diagram to the left is REC AMP. The amp gain is approximately 14dB. R1 and R2 that determine the gain is located inside the IC. It is uniform and independent to frequency. Frequency characteristics should be considered when designing rec amp. The REC amp should be the opposite to playback characteristics.
R1 R2
Fig. 13-31 REC Amp 7) OSC (Oscillation) Oscillation frequency is 70KHz. Its size is approximately 45Vp-p. it operates on recoed mode. It is supplied to audio erase head and full erase head used to erase already recorded signals. Also, it conducts AM (Amplitude Modulation) using oscillation signals. 8) BIAS Control Oscillation coil is used in oscillation Bias. Coil output changes according to the impedance of F/E, A/E and R/P head connected to the coil. 9) 60KHz HPF There must be standard signal for bias control and that signal uses HPF only to obtain oscillation signal that comes through R/P head. 10) S/W The switch opens when recording, shorts during playback and exterior transister is used.
13-38
Samsung Electronics
11 6 5 7 3 2 58 76 78 1 80 77 10 79
BIAS CTL PB EQ (+) PB EQ (-) PB EQ SW PB EQ OUT LINE PB IN A.MUTE INPUT 1 INPUT 2 Vref Filter Input 3 Vcc Line Out ALC IN
Samsung Electronics
13-39
13-7 TM
(1) Outline
RF and frequency synthesized tuning system General description : The receiving circuit consists of both ANT input and output circuits, channel selection circuit, PIF circuit and SIF circuit. The receiving circuit selects a desired broadcast signal from TV signals induced on an antenna and sends stable video and audio signals to their respective processing circuits.
(MODULATOR SECTION)
(TUNER SECTION)
(IF SECTION)
Mixer IC
SAW Filter
IF AMP
Video Detector
VHF OSC
FM Detector
SIF Filter
UHF OSC
TV SET
10
13 AUDIO OUT
11
16
13-40
Samsung Electronics
D.T(VL)
S.T(VL)
VHF OSD
H.P.F
S.T(U)
U.RF Amp
D.T(U)
UHF OSD OSC AMP IF AMP
Prescaler
IF to IF Section VL VH U
LPF
C.P.
BAND SW
REF
Tu voltage out
Fsc IN
Tu
Clock
Data
+B
Samsung Electronics
13-41
(4) IF Block
A. SAW FILTER It passes only needed band of the signal that is converted to IF frequency and decrease other band to minimize the effect of adjacent channel. B. IF AMP IF signal ,which is selected in SAW FILTER, is amplified in IF amp frequency enough to be detected. The IF AMP has parallel inputs & outputs structure and consists of 3 series step AMP.Each step has about 20dB gains.These gains are controlled by AGC voltage has maximum 63dB attenuation range. C. RF AGC CONTROL It is adjusted to determine RF AGC working point in tuner. D. FM DETECTOR After removing AM signal in the limiter AMP ,amplified SIF signal is applied FM detector. This FM detector is PLL detecting type. E. AFT DETECTER AFT automatically controls the OSC frequency in the tuner, so that it retains a constant level. It is a quadrature detection type. The carrier, which is detected from video det is directly input to AFT detector . The 90 degree delayed phase signal is input at the same time to AFT detector and ,the results come out. Detected AFT voltage is amplified by DC AMP and then applied to pin 13.
FROM TUNER SECTION ! SIMENS : M1867M @ SANYO : LA7567BVA TO TUNER RF AGC AFT OUT
AUDIO OUT
SAW FILTER
FM DET
RF AGC
IF AGC
VIF AMP
AGC
1'ST DET
VCO
4.5MHz BPF
SIF TRAP
VIDEO OUT
VCO TANK
13-42
Samsung Electronics
13-8 OSD
The on screen display circuit consist of a character generator decoder, video mixer, sync separator and sync generator, sync detector circuit. The data is decoded and generates characters in syncro with composite video signal applied pin 49, 50. Also the sync detector circuit discriminates the presence of a video signal by detecting sync, if no sync is detected, a blue screen is displayed. In other word, the OSD circuit displays character on the video when there is a video signal or on blue screen when there is no video signal. (No sync).
IC601
37 38 4/2 fsc oscilator Sync signal generator CVin 49 Sync-tip clamp H V Background video signal Blue Background Super impose 47 CVout
Character data ROM (128 characters) AFCC 52 57 AFCLPF Control circuits (display position. blinking. etc.) registers On-screen display RAM AFC Display data readout control
H/V seperation
Samsung Electronics
13-43
13-9 Input-Output
The external signals of DVD/VCR combo is inputed to the Video/Hi-Fi IC. VCR Block selects the input signal, and then it can record the selected input signal and output the signal to external port. IC801 is the switch that selects the AV output signal of DVD/VCR combo and finally output the signal to TV.
U11 DVD 2CH AUDIO PCM1753 JK801 REAR INPUT JACK (VIDEO / AUDIO L,R) JK701 FRONT INPUT JACK IC301 A/V (ONE CHIP) LA71207 IC601 VCR u-COM MN101DF10 IC801 VIDEO OUT SW MM1501 VIC1 DVD VIDEO SW LA73054 Fig. 13-36 Block Diagram <Table 13-4 : Output Video Signal Condition> IC801 MM1501 SM CONDITION PIN1 CTL HIGH (5V) LOW (0V) PIN2 OUT SIGNAL VCR VIDEO AT PIN 4 DVD VIDEO AT PIN 6 <Table 13-5 : Output Audio Signal Condition> IC501 HI-FI IC CONDITION CH L-CH INPUT SIGNAL LINE 1 (FRONT INPUT) LINE 2 (REAR INPUT) DVD BLOCK AUDIO LINE 1 (FRONT INPUT) L-CH LINE 2 (REAR INPUT) DVD BLOCK AUDIO INPUT PIN 7 9 12 69 71 74 77 80 Output A-signal is controled by IIC Pulse at 37, 38 pin OUT PIN IC501 HI-FI AUDIO LA72670BM JK801 REAR JACK "A/V OUT"
13-44
Samsung Electronics
ADDRESS
Fig. 13-37
Samsung Electronics
13-45
13-11 RF
13-11-1 U3 (S5L5010X)
S5L5010X is combined with RF Block developed for DVD SERVO system. Main features include DVD waveform equalizing, CD waveform equalizing, focus error signal generation, 3-beam tracking error signal generation, DPD 1-beam tracking error, defect, MIRR output, Laser Power Control, etc.
13-11-1(b) RF signal
Fig. 13-38 shows the flow of signal generated by the pick-up. RF signal detected from pick-up is converted into RF signal via RF interface and attenuators. A, B, C, D signals detected from pick-up are converted into FE, TE, DEFECT, ENV signals.
AGCP AGCB AGCC
144 RFSUM
GAIN_RFSUM -2 ~ 20 dB (2dB Step)
Abcd_sel
M U X
RFAGCO EFMI
EFM silcer
EFM
Vref
AGCOP AGCON
RF EQ
EQF EQG
RFEQO
Vref
GCA
EQ VCPS EQ
Phase DETECTOR
LPF
GCA
MUX
GCA
+ +
EQ VCPS EQ
SPEED_SEL Vref
M U X
RFPEN-Sel
SBAD
149 GCA
GAIN_TE1
Phase DETECTOR
PD_LIMIT
LPF
E F
TBAL
154 155
TBAL GAIN_TE3
+ -
TE_OFST
MUX_TE
GAIN
170
TE
TZCI
150 151 152 153
GAIN_GCA
GCA GCA GCA GCA + + + +
TZCO
128
A1+C1
+ +
GAIN
TE
GAIN_FE
ABCDO
Gain & Current Control
RFPEN
BandGap Reference
A1 B1 C1 D1
ABCD
DEFECT
FCB
PDDVD 159 PDCD 158 LDODVD 156 LDOCD 157 ALC PreAmp PDADC SDAC TEO FEO
RF Peak, Bottom
163 165
Fig. 13-38
13-46
Samsung Electronics
13-12 Servo
13-12-1 Outline
SERVO system of DVD is Composed of Focusing SERVO, Tracking SERVO, SLED Linked SERVO and CLV SERVO (DISC Motor Control SERVO). 1) Focusing SERVO : Focuses the optical spot output from object lens onto the disc surface. Maintains a uniform distance between object lens of Pick-up and disc (for surface vibration of disc). 2) Tracking SERVO : Make the object lens follow the disc track in use of tracking error signal (created from Pick-up). 3) SLED Linked SERVO : When the tracking actuator inclines outwardly as the object lens follows the track during play, the SLED motor moves slightly (and counteracts the incline). 4) CLV SERVO (DISC Motor Control SERVO) : Controls the disc motor to maintain a constant linear velocity (necessary for RF signal).
172
FOD
CN2 17 16 21 3 9 10 14 13 12 11 3 4 2 15 18 CN3 1 2 5 6 7 4 3 10 11 8 9
LED POWER GND S5L5000 S5L5000 TM+ TM1 SP+ SP-
26 25 27 28
13 14
U5 (FAN8026)
11 21 7
S5L5010X
18 17 16 15
5 10
13-12-3 Operation
1) FOCUSING SERVO
(1) FOCUS INPUT The focus loop is changed from open loop to closed loop, and the triangular waveform moves the object lens up and down (at pin 172 of U3 during Focus SERVO ON.) At that time, S curve is output to pin 128 of U3. ABCDSUM (pin 164 of U3) signal, summing signal of A, B, C, D, is generated, and zero cross(1.65V) point occurs when S curve is focused and ABCD signal exceeds a preset,constant value. The focus loop is changed to closed loop, and the object lens follows the disc movement, maintaining a constant distance from the disc. (these operations are same in CD and DVD).
Vref
Vref
1.5V
Fig. 13-40 (2) PLAY When focus loop closes the loop during focus servo on, pin169 is controlled by VREF Voltage (Approx 1.65V).
2) TRACKING SERVO
(1) NORMAL PLAY MODE For DVD Composite : The signal output from A, B, C, D of Pick-up, the tracking error signal (pin170 of U3) uses the phase difference of A+C and B+D in U3. Then, it is output to U3 pin 173 via digital equalizer, and applied to the tracking actuator through U5. Pin 170 of U3 is controlled by VREF(approx. 1.65V) during normal play. Meanwhile, DVD repeats the track jump from 1 track to 4 track in inner direction at normal play (because dataread speed from disc is faster than data output speed on screen). For CD, VCD Receive the signal output through E, F of Pick-up, from pick up. The tracking error signal is similar to DVD.
13-48
Samsung Electronics
(2) SEARCH Mode : Search mode : Fine seek,(Moving the tracking actuator slightly little below 50 track) and coarse search, moving much in use of sled motor. The coarse search will be described in sled linked servo and now, the fine seek is explained shortly. If the object lens is located near target, cut off the tracking loop and give the control signal as many as desired count to move the tracking actuator via U3 pin 173 terminal(TRD).
Samsung Electronics
13-49
U4
LDODVD
RF
U5 (FAN8026)
U3 S5L5010X SAMSUNG
U7 Level Shifter
54MHz
U1
13-14 Video
13-14-1 Outline
U3(A/V decoder) diverges from the 54MHz crystal, then generates VSYNC and HSYNC. Video signal converted into analog signal is outputted via amplifier of analog part.
Video data
CVBS CVBS Y C
CVBS
Y C Y Pb
Pb Pr
LA73054 (VIC1)
Pr
Samsung Electronics
13-51
13-15 Audio
13-15-1 Outline
A/V decoder (U3 ; S5L5010X) is supply to DATA 0 for 2-channel mixed audio output. The audio data transmitted from A/V decoder (U3 ; S5L5010X) are converted into analog signal via audio D/A converter and outputted via post filter and amplifier. CD and VCD are outputted with only 2 channels audio data and transmit them to Data 0. If DVD of multichannel Source disc, if is downmixed and transmit them to Data0. If you want to listen to the multichannel output, you have to connect digital output with AC-3 amp or MPEG/DTS amp.
Mixed Audio Output (2-Channel) U3 S5L5010X A/V Decoder DATA0 LRCK BCK U8 PCM1753 D/A CONVERTER POST FILTER POST FILTER AMP AMP L R
13-52
Samsung Electronics
AUDIO INPUT BUFFER Compressed Data WMA (MPEG, Dolby Digital), CD-DA, LPCM AUDIO DECODER (MPEG, DOLBY DIGITAL, CD-DA, LPCM, WMA
IEC-958/1937 INTERFACE
Uncompressed 16- or 24-bit LPCM samples at fs=44.1,48,96KHz 2-, 4, or 6CHANNEL OUTPUT PROCESS DIGITAL AUDIO INTERFACE AUDIO DAC
1) Compressed Data
The audio data inputted to U3 (S5L5010X) A/V decoder is divided into compressed data and uncompressed data. It is compressed data that is compressed with multi-channel audio data such as Dolby digital, MPEG, DTS, WMA,etc. The compressed data inputted to U3 (S5L5010X) is converted into the uncompressed data of 2, 4, and 6 channels through U3 built-in audio decoder and is outputted to Data 0 through digital audio interface. The compressed data is transmitted to external AC-3 amplifier or MPEG/DTS amplifier as IEC-958/1937 transmission data format compressed by U3 built-in IEC-958 output process.
2) Uncompressed Data
The uncompressed data is that data that isnt compressed, so it is called CD-DA, LPCM data. The 2 channels data is converted through audio decoder 2-channel data and Data 0 and are outputted in digital audio interface.Via IEC-958 output process, they are transmitted to digital amplifier or AC-3/MPEG/DTS amplifier built in the external digital input source with IEC-958/1937 transmission format.
Samsung Electronics
13-53
MEMO
13-54
Samsung Electronics
System control Switch-Detect Cam slider Tape loading Pinch lever Cassette holder (Front loading setion) FL cam gear Loading motor Reel sensor (Front loading setion) Tension post Reel brake Idle gear Tape sensor REC-inhibiting SW
Reference Information
T guide roller
ACE head base ACE head position adjusting screw Pinch roller Tension lever & tension post RPS (released by FF/REW mode) No.9 guide (pulled out at RPS model) Capstan motor No.8 guide ACE adjusting screw Tilt Azimuth Height ACE head position adjusting slite
FE head
Cylinder
Reference Information
FE head
Tension post
Tape guide
S (Supply) reel disc Idle gear Capstan belt Clutch gear (Clutch mechanism)
Samsung Electronics
14-3
Reference Information
(1) When a video cassette is inserted into the cassette holder and pushed furthermore, FL arm lever is rotated by motion of the cassette holder. The rotation of FL arm lever makes the horizontal moving of FL drive slider. (2) When the information of Switch Detect is transmitted to the microcomputer, the loading motor starts to rotate. (3) The rotation is transmitted in a sequence shown below : Loading motor - worm gear - worm wheel FL Cam Gear - FL Drive Slider - Arm Lever Cassette Holder (4) The video cassette is horizontally moved. (5) The cassette tape is vertically moved. In this case, the cassette lid is opened. (6) The cassette tape is set on the reel disc, and loading operation completes. (7) The cassette tape is loaded. (8) The status becomes full loading. (9) When the cassette is out, the reverse steps of the above procedure are carried out.
Switch Detect ON Microcomputer Loading Motor ON Loading Motor Worm Gear Worm Wheel FL Cam Gear FL Drive Slider Arm Lever Cassette Holder Cassette Horizontal Motion Cassette Vertical Motion Cassette Door Open Microcomputer Cassette Loading Complete Tape Loading Full Loading Mode
Loading motor
F L drive slider
Worm wheel
14-4
Samsung Electronics
Reference Information
Tape guide
Samsung Electronics
14-5
Reference Information
S guide roller
Tape guide
14-6
Samsung Electronics
Reference Information
S guide roller
FE head
Tension post
Tape guide
Samsung Electronics
14-7
Reference Information
FE head
Tension post
Tape guide S (Supply) reel disc Clutch gear (Clutch mechanism) Capstan belt T (Tape-up) reel disc
Idle gear
14-8
Samsung Electronics
Reference Information
Remote control
Remote
M Loading motor
broken safety tab REC-inhibition Mode sensor (Detecting of mechanical mode position) (Detection of cassette-in/cassette-out) Cassette Tape in Switch-Detect Mode SW
reel retation Take up Abnormal FF/REW speed control Supply Key matrix Front button Input Abnormal reel retation FF/REW speed control
Current control Capstan motor control (Speed direction) Capstan motor drive
M Capstan motor
FG pulse CTL pulse (Linear time counter) REC control Cylinder motor control POWER ON/OFF REC mute TV/VCR FG/PG pulse Cylinder motor drive
FG
IIC BUS
Control
M Cylinder motor PG FG
Samsung Electronics
14-9
Reference Information
FL cam gear
FL drive slider
FL arm lever
Cassette holder
Cam slider
Mode SW No.9 guide Loading drive gear Pinch drive lever Tension drive lever S brake T brake Up/Down lever Fig. 14-12 Transmission Path of Operation S, T slider Pinch lever Tension lever
Fig. 14-14 shows each mode and mechanism status in each mode concerned with the rotation of the FL cam gear or cam slider shift. The mechanism operates as shown in Fig. 14-13 according to the timing chart in Fig. 14-14. Note : The Switch Detect is actuated by the rotational moving of Lever FL Arm-R and Switch on or off by insertion or ejection of a cassette.
14-10
Samsung Electronics
Reference Information
<Top View>
Loading motor
S slider assembly
Tension lever
Joint lever
S brake (off)
(4) To simplify wiring and others, the electrical components relating to operation of the mechanical deck, such as sensors, mode switch, servo microcomputer, etc. are mounted on the PCB arranged all over the bottom side of the mechanical deck. Fig. 14-13 Mechanical Operation <Bottom View> T loading lever assembly
Tension drive lever
Loading motor
Cam slider
S brake
Tension drive lever
Reference Information
14-12
Samsung Electronics
Reference Information
(1) There are two STOP modes and two FF/REW modes. 1) STOP 1 This mode is performed when PB and FF/REW is not done for 5 miniute at power on. The small load is given to S REEL DISC and T REEL DISC. And the cylinder motor is stopped. 2) STOP 2 This mode is performed when you press the stop button as performing FF/REW. The large load is given to S REEL DISC and T REEL DISC. 3) FF/REW 1 This mode is performed when The tape load is small during performing FF and reducing speed. The tape load is large during performing REW. The small load is given to S REEL DISK and no load is given to T REEL DISC. 4) FF/REW 2 This mode is performed when The tape load is large during performing FF. The tape load is small during performing REW and reducing speed No load is given to S REEL DISK and the small load is given to T REEL DISK. (Cf) According to acceleration, deceleration, and the location of tape, tension control which is caused by converting FF/REW 1 and FF/REW 2 each other is performed during FF or REW. (2) The condition of S Brake and T Brake at each mode. < S BRAKE> 1) OFF BRAKE (Unloading completion, RPS, PLAY, FF/REW 2) - S BRAKE is detached from S REEL DISC completely. So S REEL DISC is free.
Fig. 14-16 2) SOFT BRAKE(during LOADING, STOP 1, FF/REW 1) - The small load is given to S REEL DISC.
Reference Information
Fig. 14-18 < T BRAKE> 1) OFF BRAKE (PLAY, FF/REW 1) - T BRAKE is detached from T REEL DISC completely. So T REEL DISC is free.
Fig. 14-19 2) SOFT BRAKE (UNLOADING Completion ,STOP 1, FF/REW 2 ) - The small load is given to T REEL DISC.
Fig. 14-20
14-14
Samsung Electronics
Reference Information
3) REVERSE SEARCH BRAKE (RPS) - The medium load is given to T REEL DISC.
Fig. 14-21 4) MAIN BRAKE (on the loading, STOP 2) - The large load is given to T REEL
Fig. 14-22
Samsung Electronics
14-15
Reference Information
Load (+)
IC601
M
Load (-)
Loading motor
SW603 Mode SW A 64 B 63 C 62 A B C
14-16
Samsung Electronics
Reference Information
S slider assembly
Tension lever
S brake (o ff)
Samsung Electronics
14-17
Reference Information
<Tape loading> (1) After slot-in operation (cassette loading), FL cam gear rotates and the cam slider starts shifting, and a loading gear is ready to start. Under this condition, the mechanism status is as follows : 1) The T main brake actuates so that tape does not com out from the T reel during the loading operation. (2) The cylinder starts to rotates after the loading motor is rotated. (3) When the cam slider reaches the position II (loading/unloading modes), the mechanism enters the loading status and operates as described below. 1) S,T sliders are moved through the loading drive gear and trun on the tension post. 2) The No. 9 guide is loaded. 3) The pinch roller is loaded up to front of the capstan. 4) The head cleaner is actuated during loading operation. 5) The S soft brake is actuated. (4) When the cam slider passes through the position III, and detects the position IV (playback standby mode), the loading motor stops. Under this condition, the mechanism status is described as below : The pinch roller is pressed to the capstan. The No.9 guide is stored in the cassette. The tension post touches the tape, band brake force is applied, and the tension servo brake mechanism actuates. Brakes for the reel discs are all off.
T slider assembly
S slider assembly
Tension lever
S brake (off)
T brake (soft)
14-18
Samsung Electronics
Reference Information
<Playback Stand-by (Stop) mode> (1) The tape loading operation completes and the loading motor stops. (2) In the same way as in the playback mode, the capstan motor rotates in forward direction and the T reel disc takes up the tape. (For more details, refer to the playback mode.) (3) After running the tape for 0.6s, the mechanism rotates the capstan in the reverse direction for 0.3s to slack the tape properly with pinch roller pressed. (4) If nothing is operated for about 5 minutes, the loading motor rotates in the forward direction and the cam position reaches the position V, and both the loading motor and the cylinder motor stop. (5) During this period, the video and audio systems are in the same status as in the stop mode. [2] Tape unloading & Cassette unloading <Tape Unloading> (1) When the [EJECT] button is pressed in the stop mode, the mechanism enters the eject mode. (2) IC601 controls cylinder motor drive IC to make the cylinder motor rotates. (3) IC601 makes the loading motor rotate in the reverse direction, and shifts the cam slider. 1) The mechanism components move in the reverse direction against the loading operation. (4) When the cam slider reaches the position II, IC601 makes the capstan motor rotate in the reverse direction (LP X11) and takes up the tape at a specified torque using the clutch mechanism. (5) When the cam slider reaches the position I, it brakes the capstan motor to stop, and then stops the loading motor after 230ms passed. <Cassette unloading> (1) Furthermore, IC601 makes the loading motor rotate in the reverse direction and also the capstan motor in reverse direction, applies braking force to the capstan motor by detecting the Switch-Detect ON --> OFF, and the capstan motor stops. (2) IC601 makes the loading motor stop after 200ms passed from sensing OFF. (3) Also IC601 makes the loading motor rotate in the forward direction after 120ms passed. (4) IC601 makes the loading motor stop after 100ms passed from loading motor rotating in the forward direction.
Samsung Electronics
14-19
Reference Information
[3] Stop mode (1) The cam slider is in the stop mode (position V) and each motor stops. (2) The mechanism status is as follows : 1) The S, T guide rollers are in the loading status. 2) The pinch roller is kept away from the capstan. 3) The tension post is shifted to the reel disc side. That is, the band brake is released from the ON status and the back tension is also released. 4) The S, T soft brakes are being applied. T slider assembly Pinch assembly (off)
S slider assembly
S brake (off)
T brake (soft)
14-20
Samsung Electronics
Reference Information
[4] FF/REW mode (1) When the [REW] button is pressed in playback standby mode, the mode enters the FF/REW mode. (2) IC601 controls Capstan Motor Drive IC and makes the loading motor rotate in the forward direction. The loading motor stops when the cam position reaches the position VI, VII (FF/REW mode). The mechanism status is as follows : 1) The pinch roller is OFF. 2) The No. 9 guide is once loaded but immediately returned. 3) The tension post is moved to the reel disc side. That is, the band brake is released from the ON status and the back tension is released. 4) The clutch holder assembly is in the direct status and the capstan driving force is directly transmitted to the reel disc. 5) Brakes for the reel discs are as follows : VI position FF/REW 1 mode (S Brake : soft brake, T Brake : off) VII position FF/REW 2 mode (S Brake : off, T Brake : soft brake) (3) IC601 makes the capstan motor rotate in the forward direction and the idle gear transmits the rotation to the S/T reel discs to take up the tape. [5] FF/REW to STOP mode (1) When the [STOP] button is pressed in the REW mode, the mechanism enters the playback standby mode. (2) IC601 makes the loading motor rotate in the reverse direction and stops at the position V. With this mode shift, the mechanism actuates S, T main brakes to stop the tape. Then, the capstan motor also stops by braking force 70ms after detecting e position. (3) IC601 makes the loading motor rotate in the reverse direction again and stops the loading motor when the cam slider reaches the position IV (playback mode), thus setting the playback standby mode.
T slider assembly Pinch assembly (off)
S brake (off)
Samsung Electronics
14-21
Reference Information
[Playback mode] (1) When the [PLAY] button is pressed in the stop mode, the mechanism enters the playback mode. (2) IC601 controls cylinder motor drive IC and rotates the cylinder motor. (3) IC601 controls Capstan Motor Drive IC to rotate the loading motor in the reverse direction and stops the motor when the cam slider reaches the position IV (playback mode). (When operating from the playback standby mode, the cam slider has been already on the position IV.) The mechanism works as follows : 1) The pinch roller moves toward the capstan side and press fits the capstan. 2) The No.9 guide is loaded once and then returned immediately. 3) The tension post touches the tape, the band braking force is applied, and the tension servo mechanism works. 4) The clutch holder assembly enters clutched condition. 5) S,T brakes are released. (4) IC601 makes the capstan rotate in the forward direction and feeds the tape. The idle gear transmits the rotation to the T reel disc and the reel disc takes up the tape at a constant torque by the clutch mechanism. (5) IC601 controls the video circuit and switches the playback screen. (6) The recording speed data identified by IC601 is displayed in the Led module.
Pinch assembly (on)
S brake (off)
T brake (off)
14-22
Samsung Electronics
Reference Information
<Still mode> (1) When the [PAUSE] button is pressed in the playback mode, the mechanism enters the still mode. The cam slider is in the position IV (playback mode), the cylinder motor is rotating, and the capstan motor is rotating in the forward direction. (2) IC 601 controls the audio circuit and actuates the audio mute function. (3) The capstan motor enters the intermittent operation mode and then stops. (4) IC 601 maintains the recording speed data just before the still operation. (5) In the slow mode, the capstan motor rotates continuously in the intermittent driving. <FPS mode> (1) When the [FF] button is pressed in the playback mode, the mechanism enters the FPS mode (forward picture search). The cam slider is in the position IV (playback mode), the cylinder motor is rotating, and the capstan motor is rotating in the forward direction. (2) IC 601 controls the audio circuit to actuate the audio mute operation. (3) IC601 makes the capstan rotate at 7 times for SP, 21 times for SLP to feed the tape, respectively. The tape is taken up at a constant torque by the clutch mechanism. (The mechanical operation is the same as that in the playback mode.) (4) The recording speed data identified by IC601 is displayed on the Led module.
Samsung Electronics
14-23
Reference Information
<RPS mode> (1) When the [REW] button is pressed in the playback mode, the mechanism enters the RPS mode. The cam slider is in the position IV (playback mode), the cylinder motor is rotating, and the capstan motor is rotating in the forward direction. (2) IC601 controls the audio circuit to actuate the audio mute operation. (3) IC601 controls Capstan Motor Drive IC to make the loading motor rotate in the reverse direction. After 180ms the loading motor stops for 250ms. During the mode shift operation, the mechanism rotates the capstan motor in the forward direction for a constant time so that the tape is not slackened. (4) When the cam slider reaches the position c (loading motor stoped for 250ms), the capstan motor is rotated in the reverse direction for a constant time, and the idle gear is swung toward the S reel disc side. Then, the loading motor rotates in reverse direction and shifts to the position III (RPS mode). When the cam slider reaches the position III (RPS mode), the loading motor stops. The mechanism status is as follows : 1) The No.9 guide is loaded. 2) The tension post is separated from the tape. 3) The T soft brake is turned on. The cpastan motor rotates in the reverse direction at 7 times for SP, 21 times for SLP to feed the tape in the REW direction, respectively. At the same time, the idle gear transmits the rotation to the S reel disc and the S reel disc takes up the tape by the clutch mechanism. (5) The recording speed data identified by IC601 is displayed on the Led module.
S brake (off)
14-24
Samsung Electronics
Reference Information
[7] REC mode <REC mode> (1) When the [REC] button is pressed in the stop mode, the mechanism enters the REC mode. (2) The cylinder motor starts and then the loading motor rotates in reverse direction. The cam slider reaches the position IV (playback mode). The tape is taken up at a constant torque. The mechanism operations are the same as those in the playback. (3) IC601 controls the audio circuit and video circuit to set the record enable mode. (4) Recording mute is released, thus setting the recording status. The CTL signal is output for recording. <REC PAUSE mode> (1) When [PAUSE] button is pressed in the REC mode, the mechanism enters the REC pause mode. (2) IC601 controls the audio circuit and the video circuit, and releases the record enable mode and performs the rewinding for synchronous editing. (3) After completion of the rewinding for synchronous editing, the cam slider is in the position IV (playback mode), the cylinder motor is rotating, and the capstan motor and the loading motor stop.
Samsung Electronics
14-25
Reference Information
2) Disc Formats DVD consists of two 0.6mm discs attached together, enabling access to the upper and lower side of the disk, and 4 sides could be used at maximum.
Single Layer : 4.7GByte Label Polycarbonate Bonding layer Reflective layer Polycarbonate
Dual Layer : 8.5GByte Label Polycarbonate Reflective layer Bonding layer Semi-reflective layer Polycarbonate Dual Side Dual Layer : 17GByte Polycarbonate Semi-reflective layer Reflective layer Bonding layer Reflective layer Semi-reflective layer Polycarbonate
Dual Side Single Layer : 9.5GByte Polycarbonate Reflective layer Bonding layer Reflective layer Polycarbonate
14-26
Samsung Electronics
Reference Information
Samsung Electronics
14-27
Reference Information
or
1 Analog CH. 1 Stream of Dolby Digital 2 Digital CH. (16Bit/44.1KHz)
14-28
Samsung Electronics
Reference Information
As the storage capacity increases, the DVD-Video separates the main data and the additional data such as the Multi-Function into different data areas, enabling the control of time-data ratio to provide the format that enables the flexible Software development 1 Movie (3.5Mbps) + Subtitle (1 Language) + Surround Audio (1 Language) = 160min storage (4.673Gbytes) 1 Movie (3.5Mbps) + Subtitle (4 Language) + Surround Audio (4 Language) = 160min storage (4.680Gbytes) 1 Music Video (4Mbps) + 2ch High quality Audio (96kHz/24bit) = 72min storage (4.648Gbytes)
DVD-Video Feature 2
DVD-Video uses the variable compresion technology, the MPEG-2 to compress the moving image optimally, minimizing the Data loss to Provide a clear, natural screen while increasing the storage time.
DVD-Video
MPEG-2 (Variable compression : Max. 1/40) - Field unit compression. - Compression rate change according to the amount of Data. - Differentiates the still image and the moving image compression rate, reducing Data loss and enables efficient compression.
Amount of data
Time
Amount of data Loss area
Video-CD
MPEG-1 (Fixed compression : Max. 1/140) - Frame unit compression. - Compresses all data using the same ratio. Fast movements are jagged, and unnatural
Time
Samsung Electronics
14-29
Reference Information
DVD-Video Feature 3
DVD-Video can store the audio using the 5.1ch Dolby Digital compression or the advanced Liner PCM method, providing the better-than-CD quality and theater like audio quality. DTS (Digital Theater System) Home theatre and music playback in the home, DTS provides high quality 5.1-channel surround sound with many extras not offered by other consumer formats. As well as handling DTS-branded releases from a growing number of music labels and consumer software producers, DTS provides enhanced 6.1 matrix and DTS 6.1 discrete decoding that envelopes the listener in sound. DTS technology is featured in a wide cross section of receiver/pre-amplifiers, DVD players and and add-on components from leading consumer audio vendors Dolby Digital (AC-3) - Unlike the traditional Dolby pro-Logic method, the Dolby Digital method separates all 5 main channels (Front L/R, Center, Surround (Rear) L/R)and the Sub woofer to provide live surround audio. - Using the Down Mix method, the conventional Dolby Pro-Logic and Stereo are all compatible. - Each separated channels are played back at CD quality sound. (Frequency band: 20Hz ~ 20KHz) Linear PCM (Pulse Code Modulation) - Provides the high quality Digital sound without the audio data compression. - Various Digital Recordings are possible as shown in the table to the right. Sampling Frequency Bit Rate 16bit 48KHz 20bit 24bit 16bit 96KHz 20bit 24bit Dolby Digital compatible Audio Mode Channel Format Audio Coding Mode 1/0 2/0 3/0 2/1 3/1 2/2 3/2 O O O O O O O O O L Front C O O O O O O O O O Mono Mono O O Surround R Surround (Rear) L R Mono Stereo Remark
14-30
Samsung Electronics
Reference Information
DVD-Video Feature 4
Multi-Language
Audio Dubbing - Max. 8 Languages Subtitle - Max. 32 Languages. Capable of storing, and selectiong. Linear PCM (Pulse Code Modulation)
DVD-Video Feature 5
Multi-Aspect
Unlike the conventional VCD or LD, DVD-Video has the default of 16:9 Wide, and can be viewed using the conventional 4:3 TV, enabling the expansion of viewer selection capabilities. - 16 : 9 TV : Wide Mode (16:9 Wide Full Screen) - 4 : 3 TV : Letter Box Mode, Pan & Scan Mode
16:9 Wide
DVD-Video Feature 6
Multi-Angle
Up to 9 angles of view may be stored, enabling the viewer to select a specific viewpoint at a given time. --> Especially, for the Music Video and Sports Title, this provides a more lively image of the scene.
Samsung Electronics
14-31
Reference Information
DVD-Video Feature 7
Multi-Story
DVD-Video provides the enviroment suitable for the bi-directional Software develoment, providing multiple scenarios. This feature enables the Multi-Story function.
OPTION
Parental Lock
For the titles that are not suitable for children viewing, Parental Locks are set, requesting user defined passwords for viewing Parential Locks may be set on specific frames of the Title, enabling the player to skip those frames during playback.
COPYRIGHT
Classify the world into 6 regions, and if the DVD Title and the Players Reginal Code do not agree, playback is prohibited. Regionnal Coding is optional for the Soft developers (Region 0 All Code), but the Hardware developers must adopt the appropriate regionnal code for sale. - Region 1 : The United States and its territories, Canada. - Region 2 : Europe, Japan, Greenland, Egypt, South Africa, the Middle East. - Region 3 : Taiwan, Hongkong, Korea, South East Asia. - Region 4 : Mexico, South America, Australia, New Zealand. - Region 5 : Russia, Eastern Europe, India, Africa. - Region 6 : China. - Region 0 : Worldwide (All Code)
14-32
Samsung Electronics
Reference Information
Remark
The image quality of the DVD-Video may vary accoring to the quality of the Master and the Authoring Process - The image quality of the DVD-Video varies according to the Digital Mastering Source such as the conventional LD, VCD, or Original Film. - Different Authoring Process are used accoring to the Software developers, and this may affect the DVD image quality. Authoring Process bit stream
Video/Audio Master
MPEG-2 Encoding
Disc Production
bit stream
Cutting Master
Subtitle Master
Subtitle Encoding
bit stream
Authoring Process
Samsung Electronics
14-33
Reference Information
MEMO
14-34
Samsung Electronics