0 evaluări0% au considerat acest document util (0 voturi)
6 vizualizări3 pagini
Kanfloor TC 111 is a 2-part, water-based polyurethane clear coating for concrete floors and other surfaces. It uses a polyacrylate dispersion and polyisocyanate crosslinker. It can be used as a clear topcoat for concrete floors, stucco, stone, and interior walls. The product has a pot life of around 4 hours after mixing parts A and B. It offers benefits such as weather resistance, low odor, chemical resistance, flexibility, and dirt pickup resistance due to its aliphatic system and hydrophilic film.
Kanfloor TC 111 is a 2-part, water-based polyurethane clear coating for concrete floors and other surfaces. It uses a polyacrylate dispersion and polyisocyanate crosslinker. It can be used as a clear topcoat for concrete floors, stucco, stone, and interior walls. The product has a pot life of around 4 hours after mixing parts A and B. It offers benefits such as weather resistance, low odor, chemical resistance, flexibility, and dirt pickup resistance due to its aliphatic system and hydrophilic film.
Kanfloor TC 111 is a 2-part, water-based polyurethane clear coating for concrete floors and other surfaces. It uses a polyacrylate dispersion and polyisocyanate crosslinker. It can be used as a clear topcoat for concrete floors, stucco, stone, and interior walls. The product has a pot life of around 4 hours after mixing parts A and B. It offers benefits such as weather resistance, low odor, chemical resistance, flexibility, and dirt pickup resistance due to its aliphatic system and hydrophilic film.
Description: Kanfloor TC 111 is a waterborne 2k polyurethane clear coating based on polyacrylate dispersion and polyisocyanate crooslinker.
POTENTIAL APPLICATION AREAS
Clear top coat for concrete floor Clear top coat for stucco and stone paint Clear top coat for stone cladding Interior wall for clean rooms, eg.food processing plant, electronic industries.
METHOD OF APPLICATION New Concrete Surface Cement concrete surface should be free from dust , loose particles and oils. A loose particle should be removed by washing or blown air. Apply KANTHANE TC-111 at a spread rate of 50-60 sq.ft/ kg/ coat depending on the porosity of the concrete. Allow 4-5 hrs. to dry, if possible wait 24 hours before application.
Application of 2K WB PU Coatings
Stir part A well and then pour part B into part A. Stir the mixed paint thoroughly before use. Recommend to use power mixing tools. Mix only enough paint to be used up before pot life. There is no obviously viscosity increasing for 2K WB products. The pot life must be controlled by the time after mixing. Any paints above pot life cannot be used. High temperature will shorten the pot life.
2 pack, mix before use, has pot life Chemical cross linking, best performance Higher hardness Higher abrasion resistance and slip resistance Excellent chemical resistance Excellent weathering