2.1 Push [CH/WXDUAL] to return to the condition before selecting Channel 16.
3.1 Push [] or [] to select operating channel.
3
2.0 RECEIVING CALL Step Description 2.1 Rotate [VOL] to turn the power ON.
2.2 Set the audio and squelch levels. 2.1 Rotate [SQL] fully counter-clockwise in advance. 2.2 Rotate [VOL] to adjust the audio output level. 2.3 Rotate [SQL] clockwise until the noise disappears.
ON ROTATE
4
2.3
To change the channel group, push both [] and [] on the transceiver.
2.4
Push [] or [] to select the desired channel.
5
3.0 TRANSMITTING CALL Step Description 3.1 Push [HI/LO] on the microphone to select the output power if necessary.
3.2
Push and hold [PTT] to transmit, then speak into the microphone.
3.3
Release [PTT] to receive.
RELEASE HOLD
6
4.0 SETTING TAG CHANNELS Step Description 4.1
Select the desired channel group (USA, INT, CAN) by pushing both [] and [].
4.2 Select the desired channel to set as a tag channel.
4.3 Push [SCANTAG] for 1 Sec to be set the displayed channel as a tag channel.
4.4 To cancel the tag channel setting, push [SCANTAG] for 1 Sec.
PUSH 1 Sec PUSH 1 Sec
7
5.0 SCANNING CHANNELS Step Description 5.1 Set tag channels as described above. 5.2 Make sure the squelch is closed to start a scan.
5.3 Select the channel group (USA, CAN, INT) by pushing both [] and [] on the transceiver, if desired.