Documente Academic
Documente Profesional
Documente Cultură
Mark the end of the line at 3,5 cm above its intersection with the horizontal
auxiliary neck line.
Connect that point with H3. Obviously, this is not the finished shape of the
lapel point yet, but an approximation.
THIRTY-SEVEN.
From the pictures I gauged that the middle row of buttons on the coat are
places slightly below the waist line. So I marked the position of the first
button 2 cm below the auxiliary waist line and 5,7 cm to the right of the
centre front (because the button columns are 11,4 cm removed,
remember?).
Measuring 10 cm upwards and downwards from that button I marked the
positions of the other two buttons, as the following two pictures show.
THIRTY-EIGHT.
Draw the other three buttons 11,4 cm to the left of the ones already there.
Please note, that these positions might well be adapted after weve cut our
fabric.
THIRTY-NINE.
The roll line for the lapels end about 1 cm above the uppermost button. I
FORTY.
Mark point h1, 2cm to the left of H1.
FORTY-ONE.
Draw the roll line of the lapels, connecting h1 and the blue mark by a
FORTY-TWO.
As we know that the lapel is 7,8 cm wide, I marked this length on the aux line
and drew a freehand lapel shape, keeping to the straight demarcation we
FORTY-THREE.
Mirror your lapel at the roll line. Now you can see where it will end up when
the coat is worn with the collar down (if it ever is).
FORTY-FOUR.
I am not sure in how far well need this step but I include it for now. Add the
I indicated the position of the collars edge, drawing a dotted line here: