Documente Academic
Documente Profesional
Documente Cultură
SUNCOTE W 664
(Water Extendable Die Cast Release Agent Concentrate)
Concentrate)
PRODUCT DESCRIPTION:
DESCRIPTION:
SUNCOTE W 664 is a premium, high dilution semi-synthetic water based die lubricants for
pressure die casting of aluminium alloys.
APPLICATION:
APPLICATION:
SUNCOTE W 664 dilute easily with soft water and used with hand or automatic spray system.
Recommended initial dilution is 1:50 - 150 the optimum dilution depends on the casting size &
shape, die condition and lubricity requirements.
ADVANTAGES:
ADVAN TAGES:
1. Does not cause build-up on the cavities on the die face.
2. Does not stain or cause excessive build-up.
3. Forms a tenacious die film that resists soldering and promotes good metal flow.
4. Produces bright, clean casting.
5. Reduces the rejection of casting.
6. Very economical to use.
7. Non-flammable
PROPERTIES:
PROPERTIES:
Appearance : Tan/Yellow
Specific gravity : 0.98 gm/cc
Ph Value :9±1
HANDLING:
HANDLING:
Low degree of hazard when used as intended
STORAGE:
STORAGE:
Keep in a cool place and avoid direct sunlight during summer months and
keep from freezing in the winter.
Once opened replace lid and seal tightly.
PACKING:
PACKING:
SUNCOTE W 664 is available in 20 Ltr. Bucket
Further information:
Information for regulations on safety and transport are provided in the safety safety datasheet.
Product technical information and data is based on the best information and does not constitute or imply a warranty or patent infringement of any
kind. The user is responsible for testing product suitability prior to use in production.
An ISO 9001-
9001-2000 Certified Company
F-1205, Phase-IV Extn. RIICO Industrial Area, Bhiwadi – 301 019 Distt. Alwar (Rajasthan) INDIA
Tel: +91 1493 645 145, Fax: +91 1493 224 332 info@sunrisemetachem.com www.sunrisemetachem.com