Documente Academic
Documente Profesional
Documente Cultură
The RF repeater acts as the back-end of the indoor distribution system and Outdoor coverage
system. It achieves the purpose of network optimization. It features compactness, stability and
reliability and is widely used in buildings, large shopping places, large underground parking
garage, exhibition centers and workshop buildings, resulting in well
distributed signal coverage in those places.
Features
Customers can select efficient working band with the select passive RF filter directly.
Automatically inspect the antenna isolation and set gains to avoid the self-excitation and
frequency filter.
Principle Diagram
RF Specification
DL
2110-2170MHz
UL
1920-1980MHz
RF band
DL
Max. output power
UL
30+2/-2
33+2/-2
37+2/-2
40+2/-2
dBm(1W )
dBm(2W )
dBm(5W )
dBm(10W )
20+2/-2
23+2/-2
30+2/-2
33+2/-2
dBm(1W )
dBm(2W )
dBm(5W )
dBm(10W )
Gain
852 dB
ALC
Yes
Channel number
In-band fluctuation
2dB/3.84MHzPEP
Complied 3GPP
Complied 3GPP
Spurious emissions
Complied 3GPP
Complied 3GPP
Input Intermodulation
Complied 3GPP
Output intermodulation
Complied 3GPP
12.5%
-35d B
Transmission delay
5. 0s
Input/Output SW R
1.5
Noise figure
5dBmin. gain
Outline Dimension
530*380*220(mm)
W eight
32 kg
Impedance
50
Connector Type
N - Female
Grade of protection
IP66
Environmental Conditions
Operating temperature
-25C ~ +55C
Storage temperature
-45C ~ +85C
Relative humidity
5% ~ 95%
MBTF
>50000 hours