Documente Academic
Documente Profesional
Documente Cultură
Case description:
mesh a block
Files required:
block.igs
7.
8.
9.
note: The figure in the BlockM Computation Window can be rotated using Ctrl + left mouse, and
the main window will be simultaneously updated. The Computation model can also be panned
and zoomed, but these operations will not effect the main window.
10.
11.
12.
13.
14.
15.
click project
select node1
click the red node of line K
click the corresponding edge
click project
select node2,node3,node4 respectively,do edges projection Reference to the above steps
select Surface
click EdgGeo render button
click node1 in the BlockM Computation Window
pick the red node of line I and the red node of line J
then, a face will be highlighted in the graphics viewport,click the corresponding surface in
the graphics viewport
click project
click node1 again
pick the red node of line I and the red node of line K
click the corresponding surface,and click project
click node1
pick the red node of line J and the red node of line K
click the corresponding surface,and click project
select node2,do the surfaces projection Reference to the above steps
click Accept
click EdgGeo render button