Documente Academic
Documente Profesional
Documente Cultură
HEMPEL'S HARD RACING 7142H is a hard antifouling (insoluble matrix) based on cuprous oxide. It
changes to its final colour after approximately 1 week of exposure to water.
Recommended use:
As an antifouling for boats of glass fibre, wood, plywood, steel and ferro-cement. Do not use on
aluminium or other light-alloy metals. Risk of corrosion in case of direct contact.
For cold and warm waters.
Availability:
PHYSICAL CONSTANTS:
Shade nos/Colours:
Finish:
Volume solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
VOC content:
19990*/ Black.
Semi-flat
52 1
13 m2/l [521.3 sq.ft./US gallon] - 40 micron/1.6 mils
24 C [75.2 F]
1.8 kg/litre [15.2 lbs/US gallon]
4 approx. hour(s) 20C/68F
8 (approx.) hrs at 10C/50F
420 g/l [3.5 lbs/US gallon]
*other shades according to assortment list.
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.
APPLICATION DETAILS:
Application method:
Thinner (max.vol.):
Nozzle orifice:
Nozzle pressure:
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min:
Recoat interval, max:
Safety:
Page: 1/2
The surface must be completely clean and dry at the time of application and its temperature must be
above the dew point to avoid condensation. The temperature of paint itself should be 15C/59F or
above. Do not apply in direct sunlight.
In confined spaces provide adequate ventilation during application and drying.
PRECEDING COAT
SUBSEQUENT COAT:
None.
REMARKS:
Film thicknesses/thinning:
Recoating note:
Note:
ISSUED BY:
Page: 2/2