Sunteți pe pagina 1din 2

Lusterite 2

WET OR DRY AIRCRAFT CLEANER POLISHING COMPOUND


Turco Lusterite 2 is a specially developed compound for chemically cleaning and polishing
aircraft exterior surfaces with or without the use of a water rinse.

Description
A creamy brown emulsion. Removes all types of jet aircraft soils, including SKYDROL,
synthetic engine oils, carbon, grease and other associated aircraft operation deposits.

Features

Forms protective film on surfaces to allow ease of subsequent cleaning.


Restores luster to paint and aluminum surfaces.
For use on all aircraft metals including high strength steel and paint.
Non-crazing to Plexiglas
Removes carbon from white tops and engine exhaust areas.
Excellent for cold weather cleaning, in combination with antifreeze.
Easy to remove.

Use instructions
1. For normal use, mix 2 parts Lusterite 2 to 1 part of water.
2. Apply by mops, brush or spray. Agitate until all soil and paint oxidations are loosened.
3. High-pressure water rinse.
OR remove with mops while still wet.
OR allow drying and mop off.
(For dry cleaning, mop application and removal is recommended).

Caution
Contains petroleum distillate. Harmful of fatal if swallowed. See product label for additional
precautionary and handling information.

Notice
The above information and recommendations concerning this product are based upon our laboratory tests and field use
experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations
or suggestions are made without warranty, express or implied. Manufacturer's and seller's sole obligation shall be to replace

Lusterite 2 (E)

that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential,
arising out of the use of this product.

Lusterite 2 (E)

S-ar putea să vă placă și