Documente Academic
Documente Profesional
Documente Cultură
Section 1101
Nattanit Trakullapphan (Nam)
Chawalnrath Wongdeshanan (Kat)
Introduction:
figure 1.1
(Blood type n.d.)
figure 1.2
(Blood type, Antigens-Antibodies n.d.)
Multiple Alleic Traits are called when there is more than two possible alleles. One
example of multi alleic traits is ABO blood type in human population.[6] There are three alleles
for blood type, which are IA, IB and i. IA and IB are dominant to allele i. And these three possible
alleles can produce four blood type in human population. IAIA and IAi make blood type A; IBIB and
IBi make blood type B while only IAIB makes blood type AB and only ii makes blood type O.
Both blood type A and B can be either heterozygous or homozygous, but blood type AB can be
only heterozygous and blood type O can be only homozygous. Genotype IAIB of blood type AB is
co-dominant because both dominant alleles, A and B, fully express their characteristic.
The red blood cells of an individual contain antigens on their surfaces that matching to
their blood group and antibodies in blood plasma that identify and combine with the antigen sites
on the surfaces of red cells of another type. Antigens and antibodies are certain protein molecules
presence in red blood cells.[4] Antibodies are located in the blood plasma while antigens are in the
surface of red blood cells. Antibody also can be called immunoglobulin.[1] It is a protective
protein in our immune system against the foreign antigens that come in our body.
Each blood type is named by its antigen in red blood cells. For example, as in figure 1.1,
blood type A contains A antigens, blood type B contains B antigens, blood type AB contains
both, and blood type O contains neither. This means that blood type A contains B antibodies,
blood type B contains A antibodies, blood type O contains neither, and blood type O contains
both as in figure 1.2. It is because A antibodies reacts with its corresponding antigen, which is A,
and B antibodies reacts with B antigens. The reaction between red cells and corresponding
antibodies usually results in clumping or agglutinating of the red cells.[3]
To do blood type testing, in this experiment, we can use agglutination tests, which is a
method to check for certain antigens or antibodies.[5] This method can show whether an
individual has which blood type. Agglutination of red cells results from antibody cross-linkages
established when different specific combining sites of one antibody react with antigen on two
different red cells.[2] This means that if anti-A antibodies react with A antigens, anti-B antibodies
react with B antigens, and anti-AB antibodies react with both A and B antigens, blood clot will
be formed. If testing with blood type O, nothing will change because blood type O does not
contain any antigen.
Therefore, the purpose of this experiment is to check how antigens and antibodies interact
and to know the individual blood type and know the possibilities of the blood type of the baby
from blood type of parents. It is important to do this experiment and know our blood type
because if we know our blood type, we will know which blood types do not match with us. If
they do not match, they can cause us to death. Since the agglutinated red cells can block blood
vessels and inhibit the circulation of the blood to various parts of the body.[4] Also, the
agglutinated blood cells crack and its contents leak out in the body, which when hemoglobin gets
outside the red blood cells, if becomes toxic, leading to death.
Materials:
2 Microscope Slides
Anti-A, Anti-B and Anti-AB
Markers
Lancets
Lancet Device
Ethanol
Cotton Ball
3 Toothpick
Method:
Slides
A circle with 1 cm diameter
Control
figure 2
1.
2.
3.
4.
5.
Draw 2 one-diameter circles on each slide and mark them as shown in figure 2.
Mark each circle control, Anti-A, Anti-B and Anti-AB as in figure 2.
Puncture the tip of your finger.
Drop one drop of blood in each slide.
Drop one drop of anti-A antibody in circle A, of anti-B antibody in circle B and of anti-AB
Results:
Data Table 1: Blood Coagulation
AB
ontrol
A
nti-A
A
nti-B
A
nti-AB
Coagulation
No-coagulation
Coagulation
from
blood
when mixing
Discussion:
blood mixed with anti-A antibodies and antiAB antibodies, blood agglutination was formed, meaning
that in the blood there was A antigen which belongs to blood type A. We could say that this blood
was blood type A because although it reacted with anti-AB antibodies, it did not show any
reaction in anti-B antibodies, which always reacts with B antigen. And if it were blood type B,
the blood would not be agglutinated when mixing with anti-A antibodies. Thus, in the blood,
there was only A antigen that could identify it was a blood type A. Also, it could not be blood
type O because there would be no changes in all circlesno blood coagulationif it were blood
type O. In addition, there had to be blood coagulation in two circles, A and AB, if the blood was
A blood type since in the anti-AB antibodies, anti-A antibodies were also present, so it formed an
interaction which was blood agglutination. From knowing this, it would be dangerous if blood
type A were injected to a person with blood type B or if injected blood type A or B to a person
with blood type O.
Nams Scenarios (Nams blood type is A, and Nams parents have blood type
of A and B)
I
B
I
B
A
B
A
B
B
I
B
I
B
A
B
The baby will have 100% blood type O, meaning that Kat has blood type O.
Conclusion:
In this experiment, we did blood type testing with considering how the blood
would change when it was mixed with each antibodies: anti-A, anti-B, anti-AB. And we
indicated from the changing what blood type it was. For the changing, it happened because of
antibody cross-linkages established when one antibody reacts with antigen on two different red
cells. Antibodies binded with its corresponding antigens to destroy them as when B-type blood is
injected into the one with blood type of A. The anti-B antibodies present in blood type A will
interact with antigen B from blood type B, forming blood clot. That blood clot can bring an
individual to death because when the substances get out from the cracking of agglutinated red
blood cells, they turn toxic. Hence, it is very necessary to know our blood type and which blood
type can match with ours. A person with blood type AB can accept all blood types. A person with
blood type A can receive blood from.
References
[1]
[2]
[3]
[4]
Nobelprize. (2015). Blood Groups, Blood Typing and Blood Transfusions [Online].
Available: http://www.nobelprize.org/educational/medicine/landsteiner/readmore.html
[Saturday. 14-March-2015 18:43]
[5]
[6]
http://www.bio.miami.edu/dywang/MultipleAlleles-MultifactorialTraits___.html [Saturday.
14-March-2015 18:22]