UG 78 : Repairs of Defects in Material May be, provided acceptance by the Inspector is first obtained for the method and extent of repairs
Inspection and Test
UG 90 : General UG 91 : Inspector UG 92 : Access for Inspector UG 93 : Inspection of Materials UG 94 : Marking of the Materials UG 95 : Examination of Surface During Fabrication UG 96 : Dimension Check of Component Parts UG 97 : Inspection During Fabrication UG 103 : MPI as per Appendix 6 and LPE as per Appendix 8.
General Inspection Details are briefed
Presentation title - 12/05/2015 P 15 ALSTOM 2013. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.