Documente Academic
Documente Profesional
Documente Cultură
Standards This grade of material is not included in the tool steel standard DIN EN ISO 4957
Chemical C Si Mn P S Cr Mo
Composition in % 0.35 - 0.45 0.20 - 0.40 1.30 - 1.60 < 0.035 < 0.025 1.80 - 2.10 0.15 - 0.25
This is a general steel grade for moulds for plastic processing with a thickness of less than 400 mm in the
Material
quenched and tempered condition at a hardness of roughly 300 to 330 HB (or ~31 to 35 HRC).
Characteristics
Relatively good machniability and polishability. This steel grade is suitable for texturing.
A martensitic microstructure will be obtained in the core of bars up to a diameter of approximately 400 mm
Transformation on quenching from the hardening temperature.
Characteristics
Transformation temperatures : Ac1b :~730oC; Ac1e :~800oC; Ms:~290oC
Applications Moulds for plastic processing; Mould frames for plastic moulds and pressure casting dies; Recipient sleeves.
o
Hardened 50 C 100oC 150oC 200oC 250oC 300oC 350oC
Hardness HRC in ~ 51.0 ~ 51.0 ~ 51.0 ~ 50.5 ~ 49.5 ~ 48.5 ~ 48.0 ~ 47.5
hardened and
o o o o o o
tempered condition 400 C 450 C 500 C 550 C 600 C 650 C
~ 46.0 ~ 44.4 ~ 42.0 ~ 39.8 ~ 36.0 ~ 32.5
o
Density at 20 C approx. 7.85 kg / dm3
o
100 C 150oC 200oC 250oC 300oC
Heat Conductivity in W /
(K*m) * ~34.1 - 40.0 ~33.9 - 40.6 ~33.5 - 41.7 ~32.8-42.0 ~32.0 - 42.2
Physical Properties
60
50
Hardness in °C
40
30
20
10
0
0 50 100 150 200 250 300 350 400 450 500 550 600
Te m pe ring Te m pe ra ture in °C
ISAN METALL
A Division of Otto Wolff Handelsgesellschaft mbH
ThyssenKrupp Services AG
Our official trading arm in Indonesia :
Jl. P. Jayakarta 24/10, Jakarta 10730 Tel .(021) 639-3933 Fax. (021) 639-8906
Website: www.krupindo.com E-mail : info@krupindo.com