Documente Academic
Documente Profesional
Documente Cultură
1. Fluid details & composition for both process side & service (utility) side
2. Flow rate of process fluid (kg/hr or m3/hr)
3. Inlet & outlet temperature of process fluid:
Heat release curve data single phase & for phase change i.e. reboilers & condensers heat release
curve along with weight fraction vapor, vapor molecular weight, heat duty
8. Physical properties:
Principally, properties like Heat capacity Cp (kcal/kg.C), density (kg/m3), thermal conductivity
(kcal/hr.m.C) & viscosity (cP) are required at inlet & outlet conditions for single phase fluid.
Additionally latent heat, surface tension, critical P & T are required for condensing & vaporizing
fluid. All these properties are available in heat release curve data generated from simulation
software.