Documente Academic
Documente Profesional
Documente Cultură
1.1 RR_ERR_RNCAP_RLC_FAILURE_SRB_RST
1.2 RR_ERR_RNCAP_RLC_ FAILURE_TRB_RST
1.3 RR_ERR_IUB_INTERFACE_PERMANENT_RL_FAILURE
1.4 RR_ERR_RNCAP_RB_WAIT_UE_RB_CFG_TIMEOUT
1.5 RR_ERR_RNCAP_CU_WAIT_UE_RSP_TIMEOUT
1.6 RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
1.7 RR_ERR_RNCAP_RC_REL_MACD_STATUS_ERR
1.8 RR_ERR_RNCAP_DEL_OLD_CCB
1.9 RR_ERR_RNCAP_RRC_UE_RSP_TIMEOUT
1.10 RR_ERR_IU_INTERFACE_RELOC_CANCELLED
1.11 RR_ERR_IU_INTERFACE_FAIL_IN_RADIO_INTERF_PROC
1.12 RR_ERR_RNCAP_RELOC_PHY_CH_RECFG_CMP_TIMEOUT
1.13 RR_ERR_IU_INTERFACE_UNSPECIFIED_FAIL
1.14 RR_ERR_IU_INTERFACE_TIMER_RELOC_CMP_EXPIRY
1.15 RR_ERR_RNCAP_RL_CAUSE_NODEB_TIMEOUT
1.16 RR_ERR_IUB_INTERFACE_CAUSE_RADIO_NW_UNSPECIFIED
1.17 RR_ERR_UU_INTERFACE_INVALID_CFG_ERR_NULL_TYPE
1.18 NBM_CRA_CELL_RR_CRM_FAIL
1.19 RR_ERR_RNCAP_RB_CU_OVERLAP_BACK
1.20 RR_ERR_RNCAP_RRC_MAIN_ABNORMAL_ERR
1.21 RR_ERR_IUB_INTERFACE_REQUESTED_CONFIGURATION_NOT_SUPPORTED
1.22 RR_ERR_RNCAP_HHO_PHYCH_RECFG_TIMEOUT
1.23 RR_ERR_UU_INTERFACE_PH_CH_FAIL_ERR_NULL_TYPE
1.24 RR_ERR_IU_INTERFACE_NO_RSRC_AVAIL
1.25 RR_ERR_RNCAP_ALCFG_IU_AAL2_FAILURE
1.26 RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
1.27 RR_ERR_IUB_INTERFACE_TRANSP_RESOURCE_UNVAILABLE
1.28 L2ERR_FPMDC_TR_SYN_NO_RESPONSE_AFTER_MAX_RETRY
1.29 RR_ERR_UU_IRCFC_PROTCL_ERROR_ERR_BEGIN
1.30 RR_ERR_UU_IRHFC_PROTCL_ERR_BEGIN
1.31 RR_ERR_IU_INTERFACE_REL_DUE_TO_UE_GEN_SIG_CONN_REL
1.32 RR_ERR_IU_INTERFACE_OM_INTERVENTION
1.33 RR_ERR_IU_INTERFACE_REQUESTED_INFO_NOT_AVAIL
1.34 RR_ERR_IU_INTERFACE_UNKNOWN_TARGET_RNC
1.35 RR_ERR_IU_INTERFACE_RELOC_FAIL_IN_TARGET_CN_RNC_OR_TARGET_SYS
1.36 NBM_CRA_CELL_RR_FAIL
1.37 NBM_IUB_RESET
1.38 RR_ERR_RNCAP_CU_CELLFACH_NOT_FIND_PROC
1.1 RR_ERR_RNCAP_RLC_FAILURE_SRB_RST
Failure error
code
Failure reasons
RR_ERR_RNCAP_RLC_FAILURE_SRB_RST
436799455
Release the bearer signaling the RLC Reset occurs, usually
because of the poor quality of empty, RLC kept retransmission
resulting reset.
UE
RNC
CN
IU RELEASE REQ
(Radio Connection With UE Lost)
Failure flowchart
IU RELEASE COMMAND
PCHR concern I
E
1.2 RR_ERR_RNCAP_RLC_FAILURE_TRB_RST
Failure error
code
Failure reasons
RR_ERR_RNCAP_RLC_FAILURE_TRB_RST
436799456
Lead to the release of the bearer service RLC reset occurs, usually
because of the poor quality of empty, RLC kept retransmission
resulting reset.
UE
RNC
CN
IU RELEASE REQ
(Radio Connection With UE Lost)
Failure flowchart
IU RELEASE COMMAND
PCHR
CONCERN IE
The RAB information block link release uplink reception before the
total number of blocks / wrong number of blocks,
the UL business the BLER. The path to: user log ->
RABinformation -> exception information -> UL BLER the link before
release in the number of each grade range + RAB block upstream
receiving total number of blocks / wrong number of blocks.
1.3
RR_ERR_IUB_INTERFACE_PERMANENT_RL_FAILURE
Failure error
code
Failure reasons
RR_ERR_IUB_INTERFACE_PERMANENT_RL_FAILURE
436996134
Received the the NODE B reported the RL FAILURE IND, uplink
radio link synchronization fails
NODEB
RNC
CN
NBAP_RL_FAILURE_IND
Wat RL restore
tmeout
Failure flowchart
IU RELEASE REQ
IU RELEASE COMMAND
PCHR
CONCERN IE
The cause is usually due to the decline in the quality of the air
interface link uplink radio link synchronization failure generally
occurs this error appears BLER elevated.Dropped calls can be
checked before the the PCHR plot logISCP. ISCP higher system
interference may lead; otherwise might cover problem
Plot log corresponding slot UL ISCP value, path: district Logs > cell -> carrier -> timeslot -> UL ISCP
User downlink transmission code link release power T
CPvalues, the path to: user log -> RRC release -> exception
information -> DL TCP number of reports -> TCP.
1.4
RR_ERR_RNCAP_RB_WAIT_UE_RB_CFG_TIMEOUT
Failure error
code
Failure reasons
RR_ERR_RNCAP_RB_WAIT_UE_RB_CFG_TIMEOUT
437127146
DCCC, business release / build process release Ue not
returnRB Reconfiguration Complete message
UE
RNC
CN
Failure flowchart
IU RELEASE REQ
(Failure in the Radio Interface)
IU RELEASE COMMAND
IU RELEASE COMPLETE
PCHR
CONCERN IE
1.5 RR_ERR_RNCAP_CU_WAIT_UE_RSP_TIMEOUT
Failure error
code
Failure reasons
RR_ERR_RNCAP_CU_WAIT_UE_RSP_TIMEOUT
437127131
Configured response timeout waiting for empty cell update
procedure RNC issued CELL UPDATE CONFIRM
UE
RNC
CN
Cell Update
Cell Update Confirm(Rb
Recfg/Ph Recfg)
Failure flowchart
Uu Interface
Timeout
IU RELEASE REQ
(Failure in the Radio Interface)
IU RELEASE COMMAND
PCHR
CONCERN IE
1.6 RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
Failure error
code
Failure reasons
RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
436603622
N ODE B initiated the IUB mouth AAL 2 release, trigger business
release
NODEB
RNC
CN
NBAP_RL_FAILURE_IND
QAAL2_RELEASE_REQ
Failure flowchart
AAL2
IU RELEASE REQ
IU RELEASE COMMAND
The cause is usually due to the decline in the quality of the air
interface link uplink radio link synchronization failure generally
occurs this error appears BLER elevated.Dropped calls can be
checked before the the PCHR plot logISCP. ISCP higher system
interference may lead; otherwise might cover problem
Corresponding slot UL ISCP value plot log path: the plot log> Cell -> carrier -> -> UL ISCP slot;
PCHR
CONCERN IE
1.7 RR_ERR_RNCAP_RC_REL_MACD_STATUS_ER
R
Failure error
code
RR_ERR_RNCAP_RC_REL_MACD_STATUS_ERR
Failure reasons
436799446
No
Failure flowchart
PCHR
CONCERN IE
1.8 RR_ERR_RNCAP_DEL_OLD_CCB
Failure error
code
Failure reasons
RR_ERR_RNCAP_DEL_OLD_CCB
437127121
User actually has dropped calls, but the network side resources has
not been completely emptied, the the UE again initiates a
connection leading to the user once the connection is released.
UE
RNC
CN
Relocation Required
Failure flowchart
Iu Release Req
Usually situation may be due to the lost contact, the UE and the
network side initiates a service, or the user to re-enable the UE to
re-initiate the RRC connection, and the RNCside is not the user
resource release. Also a small part of the reason is lead by
the DSCR, in LCR 5.0 advised to turn off the DSCR function.
23G switch (or RNC switch between) failed in the RNC the
border or 3G coverage boundary cell, RNC to the UE initiateDSCR
UE still from 3G original cell access (or the surrounding adjacent
cell access), when the RNC found access a repeat
user IMSI number, old user initiated release.
If 23G switch (or RNC switch between) success, UE and rapid
source cell from the switch will occur the IMSI conflict, initiated by
the release.
Whether in the then system dropped calls, you need to see
whether IU REL REQ message, if not is not counted as dropped
calls; IU REL REQ message, but the carrying value of the reason is
the normal release, does not count as a dropped call .
PCHR
CONCERN IE
SRB RLC Reset times. The path to: user log -> RRC release ->
RRC release head -> UL / DL the SRB RLC the Reset Views.
1.9 RR_ERR_RNCAP_RRC_UE_RSP_TIMEOUT
Failure error
code
Failure reasons
RR_ERR_RNCAP_RRC_UE_RSP_TIMEOUT
437127122
Timeout waiting for RRC CONN CMP news, RRC connection
establishment failure
UE
RNC
CN
Failure flowchart
Uu Interface
Timeout
PCHR
CONCERN IE
1.10
RR_ERR_IU_INTERFACE_RELOC_CANCELLED
Failure error
code
Failure reasons
Failure flowchart
RR_ERR_IU_INTERFACE_RELOC_CANCELLED
437127122
In the TRNC side, the core network IU REL CMD message received
in the process of waiting for Ue response, including reasons for
value CANCELL this case most SRNCBecause some exceptions
sent to the CN the RELOC CANCELLmessage
no
Since the actual cause of the error occurred in the SRNC,the need
to by IMSI match view the log corresponding SRNC to confirm the
specific reasons.
PCHR
CONCERN IE
1.11
RR_ERR_IU_INTERFACE_FAIL_IN_RADIO_INTERF_PRO
C
Failure error
code
Failure reasons
Failure flowchart
RR_ERR_IU_INTERFACE_FAIL_IN_RADIO_INTERF_PROC
436930539
Usually during the migration process, DRNC side response timeout
waiting empty core network notification SRNC side migration failed.
no
PCHR
CONCERN IE
1.12
RR_ERR_RNCAP_RELOC_PHY_CH_RECFG_CMP_TIME
OUT
Failure error
code
RR_ERR_RNCAP_RELOC_PHY_CH_RECFG_CMP_TIMEOUT
437127139
Failure reasons
The DRNC side of the waiting empty response timeout, notice the
release of the core network IU link
Failure flowchart
no
PCHR
CONCERN IE
1.13 RR_ERR_IU_INTERFACE_UNSPECIFIED_FAIL
Failure error
code
Failure reasons
RR_ERR_IU_INTERFACE_UNSPECIFIED_FAIL
436930640
The under hair IU REL CMD message 1.CN release cause
valueUNSPECIFIED_FAIL
The migration process, DRNC to the SRNC back migration
Failure flowchart
no
1, View forward pass the message carries the release cause;
PCHR
CONCERN IE
1.14
RR_ERR_IU_INTERFACE_TIMER_RELOC_CMP_EXPIRY
Failure error
code
Failure reasons
RR_ERR_IU_INTERFACE_TIMER_RELOC_CMP_EXPIRY
436930529
CS disparate systems switch received the news of the IU RELEASE
CMD of the core network, because the value
IU_TRELOCCOMPLETE_EXPIRY
no
Failure flowchart
The possible core network does not receive disparate systems side
the RELOC COMPELETE message timeout after the release
of IU links. Need to see CN log, DRNC side log / BSCside of the log.
PCHR
CONCERN IE
1.15
RR_ERR_RNCAP_RL_CAUSE_NODEB_TIMEOUT
Failure error
RR_ERR_RNCAP_RL_CAUSE_NODEB_TIMEOUT
code
436996049
Failure reasons
Failure flowchart
PCHR
CONCERN IE
no
1.16
RR_ERR_IUB_INTERFACE_CAUSE_RADIO_NW_UNSPE
CIFIED
Failure error
code
RR_ERR_IUB_INTERFACE_CAUSE_RADIO_NW_UNSPECIFIED
436996065
Failure
reasons
Failure
flowchart
no
Root due to
the Find
method
PCHR
CONCERN IE
1.17
RR_ERR_UU_INTERFACE_INVALID_CFG_ERR_NULL_T
YPE
Failure error
code
RR_ERR_UU_INTERFACE_INVALID_CFG_ERR_NULL_TYPE
437127179
Failure reasons
RNC
UE PDP Context
Deactived
Failure flowchart
PCHR
CONCERN IE
1.18 NBM_CRA_CELL_RR_CRM_FAIL
Failure error
code
NBM_CRA_CELL_RR_CRM_FAIL
420349909
Failure reasons
Failure flowchart
no
PCHR
CONCERN IE
Check the cell log (time slot and code resources) to confirm whether
the code was lack of resources
The carrier idle RU cell log information, paths: district Logs -> cell > Carrier -> R4/HSPA users. And
1.19 RR_ERR_RNCAP_RB_CU_OVERLAP_BACK
Failure error
code
Failure reasons
RR_ERR_RNCAP_RB_CU_OVERLAP_BACK
437127148
The RB setup or reconfigurable cell update message is received
when the wait for a response
UE
RNC
CN
Failure flowchart
IU RELEASE REQ
IU RELEASE COMMAND
PCHR
CONCERN IE
1.20
RR_ERR_RNCAP_RRC_MAIN_ABNORMAL_ERR
Failure error
code
Failure reasons
RR_ERR_RNCAP_RRC_MAIN_ABNORMAL_ERR
436602845
Receive process exception error message usually wait for
theAL establishing, leading the AL creation failed
no
Failure flowchart
PCHR
CONCERN IE
1.21 RR_ERR_IUB_INTERFACE_REQUESTED_CON
FIGURATION_NOT_SUPPORTED
Failure error
code
Failure reasons
RR_ERR_IUB_INTERFACE_REQUESTED_CONFIGURATION_NO
T_SUPPORTED
436996060
RL establish or re-configuration process, NODE B returns the
requested configuration is not supported.
NODEB
RNC
CN
Rab Assignment Req
Failure flowchart
1.22
RR_ERR_RNCAP_HHO_PHYCH_RECFG_TIMEOUT
Failure error
code
Failure reasons
RR_ERR_RNCAP_HHO_PHYCH_RECFG_TIMEOUT
437127127
Switching process hollow mouth physical channel reconfiguration
message response timeout waiting for empty
UE
RNC
CN
Trigger Hho
Procedure
Failure flowchart
Check the switch failed before the target cell signaling transport
channel of the total number of packets received and the number of
error packets, judgment whether uplink.
According to the type of switch (the same frequency /different
frequency), and reported a measurement report, it is judged whether
it is due to the same frequency interference or override causes
PCHR
CONCERN IE
Switch fails before the RLC retransmission rate, the total number of
packets received before the target cell signaling transport channel
switching failure and the wrong number of
packages. Path: PCHR users log -> system and system switch >exception information -> the wrong number of packets received
before the failure of the SRB RLC retransmission rate and switching
signaling transport channel and the total number of packets.
1.23
RR_ERR_UU_INTERFACE_PH_CH_FAIL_ERR_NULL_TY
PE
Failure error
code
Failure reasons
RR_ERR_UU_INTERFACE_PH_CH_FAIL_ERR_NULL_TYPE
437127156
Switching process hollow mouth to receive the physical channel
failure message message due to PHY_CH_FAIL.
UE
RNC
Trigger Hho
Procedure
Failure flowchart
Hho Procedure
Failure
PCHR
CONCERN IE
The cell log UPPCHR ISCP values path is: plot log -> cell ->
UPPCH ISCP.
1.24 RR_ERR_IU_INTERFACE_NO_RSRC_AVAIL
Failure error
code
Failure reasons
Failure flowchart
RR_ERR_IU_INTERFACE_NO_RSRC_AVAIL
436930639
SRNC initiated migration prepare failure message is received after
the migration of the core network ready, because the the DRNC side
does not have the resources.Possible reasons: no
available license; unable to obtain theCCB table.
no
Check the the DRNC side PCHR log, see if the user is denied due to
the code resource issues or the number of users limit migration into.
PCHR
CONCERN IE
The DRNC side corresponding to user error. The path to: user log ->
the RAB information / RRC release -> exception error code.
1.25 RR_ERR_RNCAP_ALCFG_IU_AAL2_FAILURE
Failure error
code
RR_ERR_RNCAP_ALCFG_IU_AAL2_FAILURE
Failure reasons
Failure flowchart
1.26 RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
Failure error
code
RR_ERR_RNCAP_ALCFG_IUB_AAL2_FAILURE
Failure reasons
Failure flowchart
Check the RNC alarm information, to see if there are abnormal
alarm Iub interface board
1.27 RR_ERR_IUB_INTERFACE_TRANSP_RESOUR
CE_UNVAILABLE
Failure error
code
RR_ERR_IUB_INTERFACE_TRANSP_RESOURCE_UNVAILABLE
436996111
Failure
reasons
Failure
flowchart
no
Root due to
the Find
method
PCHR
CONCERN IE
1.28 L2ERR_FPMDC_TR_SYN_NO_RESPONSE_AFT
ER_MAX_RETRY
Failure error
code
L2ERR_FPMDC_TR_SYN_NO_RESPONSE_AFTER_MAX_RETRY
Failure
reasons
Failure
flowchart
no
Root due to
the Find
method
PCHR
CONCERN
IE
1.29 RR_ERR_UU_IRCFC_PROTCL_ERROR_ERR_B
EGIN
Failure error
code
RR_ERR_UU_IRCFC_PROTCL_ERROR_ERR_BEGIN~RR_ERR_UU_IR
CFC_PROTCL_ERROR_ERR_END
PS domain inter-system handover failure because the UE sends
HANDOVER FROM UTRAN FAILURE, the reasons value is one of the
following:
Failure
reasons
Configuration unacceptable,
physical channel failure,
protocol error,
unspecified
Failure
flowchart
Root due to
the Find
method
If the reason the majority of the "physical channel failure", are generally
in 23G edge, empty of poor quality, or 2G cell congestion and other
reasons;
For other reasons, you can view the protocol version supported by the UE,
PCHR
CONCERN IE
1.30 RR_ERR_UU_IRHFC_PROTCL_ERR_BEGIN
Failure error
code
RR_ERR_UU_IRCFC_PROTCL_ERROR_ERR_BEGIN
~RR_ERR_UU_IRCFC_PROTCL_ERROR_ERR_END
PS domain inter-system handover failure because the UE sends
HANDOVER FROM UTRAN FAILURE, the reasons value is one of
the following:
Configuration unacceptable,
Failure reasons
PCHR
CONCERN IE
1.31 RR_ERR_IU_INTERFACE_REL_DUE_TO_UE_G
EN_SIG_CONN_REL
Failure error
code
Failure reasons
RR_ERR_IU_INTERFACE_REL_DUE_TO_UE_GEN_SIG_CONN_
REL
436930565
Due to the small amount of data of the UE in a period of time
caused by the IU port release
no
Failure flowchart
PCHR
CONCERN IE
1.32 RR_ERR_IU_INTERFACE_OM_INTERVENTION
Failure error
code
RR_ERR_IU_INTERFACE_OM_INTERVENTION
Failure reasons
OMIU
Failure flowchart
Root due to the
Find method
PCHR
CONCERN IE
436930638
no
OM intervention caused the IU mouth release
1.33 RR_ERR_IU_INTERFACE_REQUESTED_INFO_
NOT_AVAIL
Failure error
code
Failure reasons
Failure flowchart
Root due to the
Find method
RR_ERR_IU_INTERFACE_REQUESTED_INFO_NOT_AVAIL
436930567
Migrated out ready to fail, the reason for the failure occurred when
applying for district resources: NBM_CRA_CELL_RR_FAIL/
NBM_CRA_CELL_CONGEST/ NBM_CRA_CELL_UNAVAIL
no
The specific reason for the failure of the target RNC / target system
side
PCHR
CONCERN IE
1.34 RR_ERR_IU_INTERFACE_UNKNOWN_TARGET
_RNC
Failure error
code
Failure reasons
Failure flowchart
Root due to the
Find method
RR_ERR_IU_INTERFACE_UNKNOWN_TARGET_RNC
436930534
RNC RELOCATION REQUIRED message is sent to the CN, CN
returned RELOCATION PREPARATION FAILURE message, the
message with the cause value: unknown target RNC
no
PCHR
CONCERN IE
1.35 RR_ERR_IU_INTERFACE_RELOC_FAIL_IN_TA
RGET_CN_RNC_OR_TARGET_SYS
Failure error
RR_ERR_IU_INTERFACE_RELOC_FAIL_IN_TARGET_CN_RNC_
code
OR_TARGET_SYS
436930554
Failure reasons
Failure flowchart
Root due to the
Find method
View the specific cause of the target RNC or target system side
PCHR
CONCERN IE
1.36 NBM_CRA_CELL_RR_FAIL
Failure error
code
Failure reasons
Failure flowchart
NBM_CRA_CELL_RR_FAIL
420382676
UE requests access code resource allocation module returns a
failure, the RNC internal might again try to access.
no
PCHR
CONCERN IE
1.37 NBM_IUB_RESET
Failure error
code
NBM_IUB_RESET
420579281
Failure reasons
Failure flowchart
Root due to the
Find method
no
PCHR
CONCERN IE
1.38 RR_ERR_RNCAP_CU_CELLFACH_NOT_FIND_
PROC
Failure error
code
RR_ERR_RNCAP_CU_CELLFACH_NOT_FIND_PROC
Failure reasons
FACH state received cell update can not handle cell update is
discarded waiting for UE redo cell update.
Failure flowchart
PCHR
CONCERN IE
no