Documente Academic
Documente Profesional
Documente Cultură
LEARNERS
OWN
ACADEMY
YEAR 2015-16
OHMS LAW
CERTIFICATE
ACKNOWLEDGEMENT
completed.
INDEX
1. CERTIFICATE OF EXCELLENCE
2. ACKNOWLEDGEMENT
3. AIM OF PROJECT
4. INTRODUCTION
5. APPARATUS REQUIRED
6. PROCEDURE FOLLOWED
7. OBSERVATION
8. CONCLUSION
9. PRECAUTION
10. BIBLIOGRAPHY
INTRODUCTION
Ohm's Law deals with the relationship between voltage and
current in an ideal conductor. This relationship states that:
The potential difference (voltage) across an ideal
conductor is proportional to the current through it.
The constant of proportionality is called the "resistance", R.
Ohm's Law is given by:
V=I
R
Where V is the potential difference between two points which
include a resistance R. I is the current flowing through the
resistance.
Material that obeys Ohm's Law is called "ohmic" or
"linear" because the potential difference across it varies
=I
EXPERIMENT
Apparatus:
1. 4 varied value of resistors
2. Power supply
3. Connecting wires
4. Multimeter Variables: Independent: Resistance Dependent:
Current Controlled: Electromotive force Procedures:
1. Set up the apparatus to be the circuit as shown in diagram
of hypothesis.
2. Set the value of electromotive force into 3 V.
3. Put the 12-ohm resistor and see the value of current in the
Multimeter.
4. Change the 12-ohm resistor with 82 and 470-ohm resistor
variedly and repeat step 3.
5. Change the value of electromotive force into 6 V.
6. Repeat steps 3 and 4 (use 56-ohm resistor instead of 12ohm resistor, because the value of 12-ohm resistor is too
small for 6V of electromoti ve force).
7. Record the data in this table:
FOR MAGNENIN:
SR.NO:
A=I
0.3
0.3
0.4
1.0
0.4
0.75
0.25
0.3
1.5
0.6
0.4
2.7
1.2
0.4
FOR CONSTANINE:
SR.NO:
A=I
0.5
1.2
2.4
2.5
2.5
1.5
2.66
SR.NO:
A=I
1.1
0.18
0.16
1.2 (l=
0.1
0.08
2.5
0.4
0.16
3.6 (l=
0.3
0.083
4.15
0.7
0.16
4
5
FOR COPPER: