Documente Academic
Documente Profesional
Documente Cultură
Topology
You will receive one of three possible topologies.
Addressing Table
Device
Router
Interface
G0/0
G0/1
Switch - 1
Switch - 2
User-1
VLAN 1
VLAN 1
NIC
Subnet
Mask
IP Address
Default
Gateway
192.168.0.1
255.255.255
.0
N/A
192.168.1.1
255.255.255
.0
N/A
192.168.11.1
255.255.255
.0
192.168.11.2
255.255.255
.0
192.168.10.1
255.255.255
.0
User-2
NIC
192.168.10.2
255.255.255
.0
User-3
NIC
192.168.10.3
255.255.255
.0
User-4
NIC
192.168.10.4
255.255.255
.0
Objectives
Scenario
Your network manager is impressed with your performance in your job as a LAN
technician. She would like you to now demonstrate your ability to configure a
router connecting two LANs. Your tasks include configuring basic settings on a
router and a switch using the Cisco IOS. You will then verify your configurations,
as well as configurations on existing devices by testing end-to-end connectivity.
Note: After completing this activity, you can choose to click the Reset Activity
button to generate a new set of requirements. Variable aspects include device
names, IP addressing schemes, and the topology.
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 2
Requirements
Name the router RTA and the second switch Switch - 2 . You will not be
able to access
.
Verify connectivity between all devices. All devices should be able to ping
any other device.
Note: Click Check Results button to see your progress. Click the Reset
Activity button to generate a new set of requirements.
ID: [[indexNames]][[indexAdds]][[indexTopos]]
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 2