Documente Academic
Documente Profesional
Documente Cultură
This Cable Gland Selection Guide was based on the the IEC 6007914 standard and CMP Cable Gland.
The following selection process flow chart can only be followed as part of the
IEC selection process after physical evaluation of the cable.
The cable entry system shall comply with the following:1.
Cable entry device in compliance with IEC 79-1 "Construction and
Verification Test of Flameproof Enclosures of Electrical Apparatus" and
particular type of cable intended to use with that device.
2.
Thermoplastic. thermosetting or elastomeric cable which is
substantially compact and circular, has extruded bedding and fillers, if any,
are non-hygroscopic, may utilize flameproof cable entry devices,
incorporating a sealing ring selected in accordance with figure below.