Sunteți pe pagina 1din 2

INSTALLATION OF THE PROGRAM (ed.

003)
At the first installation of the program, the system executes the installation o
f the
main software module and of the additional ones relevant to the types of the
requested equipment.
At the FIRST INSTALLATION of the program, execute the following procedure:
1. Start up MS Windows.
2. Close all the application programs on progress as the ones open on the deskt
op
as the ionised ones.
3. Insert the installation CD, into the proper unit.
The installation procedure is automatically started-up (auto-run).
4. Execute the indications displayed on the video screen.
The parameters requested during the installation procedure and the operation
s necessary
to set such parameters are the following ones:
* Installation key (Validation window).
Type, into the proper spaces, the number pointed out into the "Licence ce
rtification"
of the product (Installation key field).
* Program to be installed (Available Programs window).
Activate the box relevant to the desired program. It is possible to activ
ate more boxes
at the same time.
* Language to be installed for the help online of the program
(Select Language window): English, French, Italian, Spanish.
Select the desired option. It is possible to select one option only.
* The group name where it has to be inserted the starting up command of the
program
(Choose Destination Location window).
The installation program by default advises a pre-defined name that can b
e changed.
* Physical connection type between the PC, on which it has been loaded the
program,
and the equipment (Connection Type window).
Select the following option:
- Connect using direct serial cable, if it is used a serial or USB con
nection.
- Connect using a modem, if it is used a modem connection.
- Connect using local area network, if it is used a connection realize
d by means of Ethernet network.
WANING. If the operator selects the "Connect using direct serial cable" o
ption push-button or the
"Connect using a modem ones", IMMEDIATELY AFTER the program installation,
EXECUTE the specific checks.

5. At the end of the procedure, the system displays a message concerning the re
sult of the installation procedure.
WARNING. It is always possible to exit from the installation program.
If the operator commands the exit from the installation procedure before its end
, the program will not be
correctly installed. In such a case, before running the program itself, it will
be necessary to execute again
the installation procedure.

S-ar putea să vă placă și