Documente Academic
Documente Profesional
Documente Cultură
Open MasterCam X7
Start >
All Programs>
MasterCam >
Utilities>
NHasp X>
If you get
No Sim Found
NetHASP
Network
Click Read
If the list on the left appears, click
ok and open MasterCam X7
If no list appears, restart the
process after restarting your
computer.
4/15/2016
If you get
No Sim Found
Create Tools
4/15/2016
X Form Tools
Create a Line
Click on the Fast
Point Lightning Bolt
Type 0,0 in the
white box
enter
Draw the line 45
in the x,+y direction.
4/15/2016
4/15/2016
Raised Pocket
Removing material, leaving the shape
Subtracted Pocket
Removing the shape
Pocket
Parameters
Two Sample Programs for Raised and Subtracted Pockets.
Select Toolpaths > Pocket
Chaining Window
4/15/2016
Programming Window
4/15/2016
Un check Lead
In/OUT
Always verify your program and make sure it looks like you envisioned. If it
doesnt meet your criteria, make changes as needed.
4/15/2016
Raised Pocket
4/15/2016
Programming an Engraving
Is the practice of carving a design onto a hard flat surface, by
cutting grooves at a precise depth centered inside a pattern.
Select
Toolpaths > Engraving
4/15/2016
Chaining Window
10
4/15/2016
Inside, Outside, On
Programming Window
11
4/15/2016
Un check Lead
In/OUT
12
4/15/2016
Contour Examples
13
4/15/2016
14