Documente Academic
Documente Profesional
Documente Cultură
Page 1 of 2
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 16M MOTOR GRADER B9H
Configuration: 16M Motor Grader B9H00001-UP (MACHINE) POWERED BY
C13 Engine
Parking Brake - Test - Use This Test for the 352-5716 Power
Train Software Gp and All Newer Software
SMCS - 4267-081
Personal injury can result if the machine moves while testing the
parking brake.
If the machine begins to move during the test, reduce the engine speed
immediately and apply the service brakes.
Note: Be sure that the machine has the 352-5716 Power Train Software Gp or newer before
performing this test.
Check the area around the machine. Make sure that the machine is clear of personnel and clear of
obstacles.
Test the parking brake on a dry, level surface.
Fasten the seat belt before testing the parking brake.
The following test is used to determine if the parking brake is functional. The brake holding effort that is
required to prevent a machine from moving at a specific engine rpm varies depending on the machine.
The variations are the differences in machine weight, power train efficiency, and the brake holding
ability, etc.
1. Start the engine and set the throttle to the HIGH IDLE. Raise the implements slightly.
2. Ensure that the parking brake is engaged.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 24/11/2009
PDF created with pdfFactory Pro trial version www.pdffactory.com
NOTICE
If the machine moved while testing the parking brake, inspect the
parking brake components for wear or damage. Repair or replace the
worn or damaged parking brake components as required before
returning the machine to service.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 24/11/2009
PDF created with pdfFactory Pro trial version www.pdffactory.com