5) FANUC
GE Fanuc Automation
Computer Numerical Control Products
Series 15
Series 150
(BMI Interface)
Connecting ManualThis manual describes the following products:
Name of products
FANUC Series 15-TA
FANUC Series 15-TF
FANUC Series 15-TTA
ee 15-17 | Series 15
FANUC Series 15-TTF | 15-TTF
FANUC Series 15-MA | 15-MA
— 15-4
FANUC Series 15-MF | 15-mF
In this manual we have tried as much as possible to describe all the
various matters.
However, we cannot describe all the matters which must not be done,
or which cannot be done, because there are so many possibilities.
Therefore, matters which are not especially described as possible in
this manual should be regarded as “impossible”.fie
2.
CONTENTS:
OUTLINE .
INTERFACE BETWEEN CNC AND PMC-MODEL NV
Series 15 BMI Interface boo
1 Address list for 15-1/15-4
2 Address list for 15-TT .
ignal List
signal Details .
1 Ready signals ...
2 Operation mode selection signals .
3 Reset and emergency stop .
4 Alarms
5 Manual continuous feed an
6 Manual handle feed .......+
7
8
9
1
L
L
L
L
L
Reference point return ....
Manual arbitrary angle feed .
Cycle start, stop restart .
Feedrate override ......
0
1 FI digit selection
2 Automatic operation test .
‘3 Optional block skip ..
4 Corner control ..
5. Miscellaneous functions, spindle speed function:
tool functions, and secondary auxiliary functions
External operation function .
Canned cycle spindle function
Spindle speed control
Program status outputs.
Axis move condition outputs ...
Mirror image .
Overtravel . =
External deceleration
Interlock
Servo off =
Controlled axes detach .
Menory protection keys .
External input/output comands
External work number search .
External data input/output .....
Skip function
Custom macro .
Tools measurement ......
Tool 1ife management ...
Spindle positioning function
Cutting depth override .
Run hour display ..
Software operator's panel ...
Spindle speed fluctuation detection .
Synchronous/independent control switching
Tool measurement B
Battery alarm
Key input .
Playback
Indexing of index table ..
Parallel axis control ....ss..0+
122
125
126
138
140
142
145
149
157
158
158
163
167
170
175
7
185
187
190