Axial expansion bellows may also be used in place of utilizing the nature flexibility of the ABS, These must
be ofa suitable design to answer correct operation with ABS pipework. Contact out technical
support engineers for further information. saris aa
(Ya pn Pa
Terms ppever
Size Support Suppor Support
oe port mm/ inch | Distance (m) } Distance (m) | Distance (m)
at 20% at 50b ar70t
Unless it is considered that minimal pipe 2Omm/ 09 06 05
movement will accrue, pipe: supports should be
designed to provide lateral restraint and allow tree 25mmn/ 74 10 07 06
unrestricted axial pipe movernent, Standard “drop
reds" may not provide could star to “snake” 32mm/ 1” Ll 08 07
Invigorpipe are designed to meet these domme ie aa rn
requirements. A suitable alternative would be steel
saddle clips designed with a clearance between the | SOmm/1 4" 13 10 07
pipe and the clip. All steel brackets in contact with
the plastic pipe should be free of sharp edges to 63mm/ 2” 14 Ml O8
Sere eee 75mm_/2.%5" 15 12 08
90mm/ 3” 16 13 09
L10mm/4" 18 13 10
‘The recommended distance between supports for |_!25mmv/ 5” us 1 Lb
ABS pipes filled with water is. given in the table iene ai = 1D
right. This table is based on the thin rest wall
pipe of each sizes. For size 1",114",1%",2" and4" | 200mm 8” 22 17 13
the support distance can be increased by 10% for
PNIGPipe. Where the contents have a specific 250mnv/ 10” 25 20 1
ravity greater than 1, the distance must be A
decreed by dividing the recommended conte [215mm/i2" [29 x aa
distances by the specific gravity. The details show 355mm/14" 3d 26 22
ate for horizontal pipes. For vertical pipes, support
centres may be increased of 50% -400mm/ 16" 33 28 24
-450mm/ 18” 35 3.0 26
* based on PNio pipe