Documente Academic
Documente Profesional
Documente Cultură
Page 1 of 2
Head Diameter
Head Height
Slot Width
Slot Depth
Max
Min
Ref
Max
Min
Max
Min
Max
Min
0000
0.0210
0.040
0.035
0.009
0.008
0.005
0.008
0.004
[Note (4)]
[Note (4)]
[Note (4)]
000
0.0340
0.060
0.055
0.014
0.012
0.008
0.011
0.007
[Note (4)]
[Note (4)]
[Note (4)]
00
0.0470
0.087
0.080
0.020
0.017
0.010
0.013
0.008
[Note (4)]
[Note (4)]
[Note (4)]
0.0600
0.112
0.095
0.026
0.023
0.016
0.013
0.008
0.020
0.012
0.074
0.0730
0.137
0.118
0.031
0.026
0.019
0.016
0.010
0.021
0.013
0.098
0.0860
0.162
0.142
0.037
0.031
0.023
0.019
0.012
0.022
0.014
0.121
0.0990
0.187
0.165
0.043
0.035
0.027
0.022
0.014
0.024
0.015
0.144
0.1120
0.212
0.188
0.049
0.039
0.031
0.024
0.017
0.025
0.016
0.167
0.1380
0.262
0.235
0.060
0.048
0.039
0.030
0.022
0.028
0.017
0.214
0.1640
0.312
0.282
0.072
0.054
0.045
0.036
0.027
0.031
0.019
0.261
10
0.1900
0.362
0.329
0.083
0.060
0.050
0.042
0.031
0.034
0.021
0.307
1/4
0.2500
0.477
0.437
0.110
0.075
0.064
0.055
0.042
0.040
0.025
0.415
5/16
0.3125
0.597
0.550
0.138
0.084
0.072
0.069
0.053
0.047
0.030
0.526
3/8
0.3750
0.717
0.662
0.165
0.094
0.081
0.083
0.065
0.053
0.034
0.638
Notes:
1. Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
2. Tabulated values determined from formula for maximum H in Nonmandatory Appendix C.
3. No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from tabulated value, the protrusion
will be affected accordingly and the proper protrusion values must be recalculated using the formulas shown in Appendix I.
4. Not practical to gage.
5. For recess dimensions, refer to Table 4.
6. For slot inspection, see para. 2.1.4.
http://www.fastener-technology.com/products/machine-screws/slotted-flat-head-mach... 10/01/2014
Products - Machine Screws - Slotted Flat Head Machine Screws - Fastener Technolog... Page 2 of 2
http://www.fastener-technology.com/products/machine-screws/slotted-flat-head-mach... 10/01/2014