Documente Academic
Documente Profesional
Documente Cultură
IBM no longer supports battery replacement on IBM servers, whether the battery is part of an IBM server
provided by the customer or a Cisco MCS 7800 server. Please visit this link for more details on IBMs policy for
consumable components with limited useful lives:
http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=MIGR-5072280.
Customer-provided servers must exactly match the vendor, make, model, specifications, and parts lists in the
configurations listed in the following sections to be supported. Deviations are not supported, and may result in an
incomplete or failed install, or postinstallation problems. Customer-provided servers must also be on the certified
hardware compatibility list for the intended software product and version.
Where equivalent Cisco 7800 Media Convergence Server model numbers are given, they should be interpreted as
the configurations used by Cisco Unified Communications Manager. The same MCS model used for other
applications (where the MCS model has a different suffix) may use different components and specifications.
Contact your local Cisco account team for more details.
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 29
Cisco no longer stocks memory and disk drive components for end-of-sale Cisco MCS 7800 models. Please
consult the parts lists in the Older IBM Servers section later in this document to get the IBM part numbers of
these components, and procure them direct from IBM. Remember to remove these parts if the Cisco Technical
Assistance Center (TAC) ever performs a return materials authorization (RMA) on the Cisco MCS 7800. If IBM no
longer has these parts available, then consider migrating to either a newer appliance or a virtualized solution as
described at http://www.cisco.com/go/uc-virtualized.
For purchasing questions not addressed in the following sections, please contact an IBM representative for your
country at: http://www.ibm.com/planetwide.
For Cisco Unified Mobility Advantage, refer to Ordering Information in the data sheet for Cisco Unified
Mobile Communicator at: http://www.cisco.com/en/US/products/ps7271/products_data_sheets_list.html.
For Cisco Unified Contact Center Enterprise, refer to Appendix A of the bill of materials at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_implementation_design_guides_list.ht
ml.
For Cisco Unified Customer Voice Portal, refer to the Cisco Unified Customer Voice Portal hardware and
software specifications at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1006/prod_technical_reference_list.html.
For Cisco Unified Presence hardware and software compatibility information, please visit:
http://www.cisco.com/en/US/products/ps6837/products_device_support_tables_list.html.
For the Cisco Unified Communications Management Suite, please visit: http://www.cisco.com/go/ucvirtualized.
Please contact IBM for hardware options for rack-mount kits, power supplies, and power cords (also note that
Cisco 7800 series Media Convergence Servers from Cisco no longer ship with cable management arms).Tables 2
and 3 list the IBM ordering instructions for the different hardware configurations. Note that although these special
for Cisco part numbers are available worldwide, they are not generally announced so will not show up in any
business partner catalogs or other locations on IBMs general website. They are usually available through the IBM
online configurator tool at https://www-01.ibm.com/products/hardware/configurator/americas/bhui/launchNI.wss.
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 29
Table 1.
IBM x3650-M2
MCS-7835-I3-IPC2
MCS-7835-I3 V05
7947-PNT
MCS-7835-I3-CXC1
MCS-7845-I3 V05
7947-PNU
MCS-7825-I5
4251-PAF
4GB RAM
2x 300GB Hard Drives
1 Quad-Core Intel 2.53GHz Intel Nehalem E5630 Processor
MCS-7845-I3-IPC2
6GB RAM
MCS-7845-I3-CXC1
MCS-7825-I5-IPC1
MCS-7825-I5-CCX1
MCS-7825-I5-CCE1
MCS-7825-I5-ECS1
MCS-7825-I5-RC1
MCS-7825-I5-MOB1
Table 2.
IBM x3650-M2
IBM Direct
Worldwide
Order IBM CSEO part number 7947-PML, 7947-PMK, 7947PMJ, 7947-PMH, or 7947-PNK by contacting an IBM sales
representative or the IBM Order Desk in your geography.
These single part numbers contains all required components
of the Cisco supported configuration.
IBM Reseller
*
Table 3.
Order IBM CSEO part number 7947-PML, 7947-PMK, 7947PMJ, 7947-PMH, or 7947-PNK by contacting an IBM business
partner. These single part numbers contains all required
components of the Cisco supported configuration.
IBM Reseller
*
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 4 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 29
Table 4.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
Description
7947-PML
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
IBM x3650-M2 Server with Single Quad-Core E5630 2.53-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 5 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 5.
Hardware for IBM x3650-M2 with Intel Quad-Core E5630 2.53-GHz Processor and 300-GB Hard Drives
Quantity
Description
7947-PMK
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 29
Hardware for IBM x3250 M3 with Single Intel X3430 2.4-GHz Quad-Core Processor
Quantity
Description
4251-PAF
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
8GB USB Key (Small Form Factor) fpr Cisco Unified Communications Solution
IBM x3650-M2
MCS-7835-I3-CCX1
4GB RAM
MCS-7835-I3-CCE1
6GB RAM
MCS-7845-I3-CCX1
MCS-7845-I3-CCE1
N/A
4GB RAM
2x 300GB Hard Drives
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 29
8GB RAM
MCS-7845-I3-MOB1
MCS-7845-I3-CCE2
IBM x3650-M2
MCS-7835-I3-IPC1
MCS-7835-I3-CCX1
4GB RAM
MCS-7835-I3-CCE1
MCS-7845-I3-IPC1
MCS-7845-I3-CCX1
6GB RAM
MCS-7845-I3-CCE1
MCS-7835-I3-ECS1
MCS-7845-I3-ECS1
MCS-7845-I3-MOB1
8GB RAM
MCS-7845-I3-CCE2
MCS-7845-I2-IPC1
MCS-7845-I2-CCE1
MCS-7845-I2-CCX1
MCS-7845-I2-ECS2 (4x146GB hard disk)
MCS-7845-I2-ECS1 (8x72GB hard disk)
MCS-7845-I1-IPC1
MCS-7845-I1-CC1
MCS-7845-I1-ECS2
MCS-7845-I1-ECS1 (4x72GB and 2x144GB hard disk configuration)
x345 Server
2x Xeon 3.06GHz Processor
4GB RAM
4x 72GB Hard Disk
MCS-7845I-3.0-IPC1
MCS-7845I-3.0-CC1
MCS-7845I-3.0-ECS2 (4x36GB hard disk)
MCS-7845I-3.0-ECS1 (4x36GB and 2x72GB hard disks)
x3650 Server
Single Xeon 5140 2.33GHz Processor
2GB RAM
2x 72GB Hard Disk
MCS-7835-I2-IPC1
MCS-7835-I2-CCE1
MCS-7835-I2-CCX1
MCS-7835-I2-ECS1
x346 Server
Single Xeon 3.4GHz Processor
2GB RAM
2x 72GB Hard Disk
MCS-7835-I1-IPC1
MCS-7835-I1-CC1
MCS-7835-I1-ECS1
x345 Server
Single Xeon 2.4 or 3.0GHz Processor
1GB RAM
2x 36GB Hard Disk
MCS-7835I-2.4-EVV1
MCS-7835I-3.0-IPC1
MCS-7835I-3.0-ECS1
IBM x3250-M2
Single Intel E3110 3.0GHz Dual-Core Processor (Note: MCS
equivalent uses long-life equivalent CPU model E8400)
2G RAM
2x 250GB Hard Drives
MCS-7825-I4-IPC1
MCS-7825-I4-RC1
MCS-7825-I4-CCX1
MCS-7825-I4-CCE1
MCS-7825-I4-ECS1
MCS-7825-I4-MOB1
x3250 Server
Single Intel 3050 Xeon 2.13GHz
2GB RAM
2x 160GB Hard Disk
MCS 7825-I3-IPC1
MCS-7825-I3-CCE1
MCS-7825-I3-CCX1
MCS-7825-I3-ECS1
x306m Server
Single Intel 950 3.4GHz
2GB RAM
80GB Hard Disk
MCS 7825-I2-IPC2
MCS-7825-I2-ECS1
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 29
x306m Server
Single Pentium D 2.8GHz
2GB RAM
80GB Hard Disk
MCS-7825-I2-IPC1
MCS-7825-I2-CCE1
MCS-7825-I2-CCX1
x306 Server
Single Pentium 4 3.4GHz
2GB RAM
80GB Hard Disk
MCS-7825-I1-IPC1
MCS-7825-I1-CC1
MCS-7825-I1-ECS1
x306 Server
Single Pentium 4 3.06GHz
1GB RAM
80GB Hard Disk
MCS-7825I-3.0-IPC1
MCS-7825I-3.0-IPC2
MCS-7825I-3.0-CC1
MCS-7825I-3.0-ECS1
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 8 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 8.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives
Quantity
Description
7947-PML
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
IBM x3650-M2 Server with Single Quad-Core E5540 or E5630 Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 9 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 29
Table 9.
Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
Description
7947-PMK
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging
products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 10 lists the
components that must be configured and will ship when you order this system. Note that additional parts are
required but are not listed. These parts will automatically be configured and may also vary by country (power
cords, documentation, etc.).
Table 10.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
Description
7947-PMJ
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 29
IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and
300-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and
Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core
E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided
(note that some product versions may require more memory). Table 11 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 11.
Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives
Quantity
Description
7947-PMH
Standard
Standard
Standard
Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
IBM x3650-M2 Server (DC Power) with Single Quad-Core E5540 2.53-GHz Processor and
146-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications,
and it is now available with DC power. When configured properly for Cisco Unified Communications Manager, up
to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory
configuration is required as long as 6 GB of memory is provided. Table 12 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 12.
Hardware for IBM x3650-M2 (DC Power) with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
Description
7947-PNK
Standard
Standard
Standard
Standard
2GB (1x2GB, Dual Rank x8) PC3-10600 CL9 ECC DDR3-1333 LP RDIMM
Standard
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 29
Quantity
Description
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor
IBM Part Number (Worldwide)
*
Description
4190-PAF
Standard
Standard
Refresh 1 Base
Standard
Standard
Standard
Standard
Standard
Standard
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided. Table 14 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 29
Table 14.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 146-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
7947-22Y
7947-AC1
7947-CTO
Standard
5653
44E5176
Standard
6990
46M1035
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
Description
44T1481
3964
44T1471
43W4296
3571
43W4298
44E8826
5864
44E8840
Standard
7553
44X0104
42D0632
5537
42D0634
Standard
4162
44W3252
46M1075
2100
44X0147
Standard
5086
44X0138
Standard
3734
46M1131
46C7526
5080
43V6923
41Y8260
9298
41Y8273
7947-22Y is a worldwide Generally Available Variant (GAV) model number that is not orderable as listed and needs to be
modified by country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part
number for 7947-22Y is 7947-22U. See the product-specific official IBM announcement letter for other country-specific GAV
model numbers. GAV-to-MTM mapping for Asia Pacific geographies follow the same pattern - substitute the last character with
the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Single Quad-Core E5540 2.53-GHz Processor and 146-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided. Table 15 lists the components that must be configured and will ship when you order this
system. Note that additional parts are required but are not listed. These parts will automatically be configured and
may also vary by country (power cords, documentation, etc.).
Table 15.
Hardware for IBM x3650-M2 with Intel Quad-Core 5540 2.53-GHz Processor and 146-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
7947-62Y
7947-AC1
7947-CTO
Standard
5653
44E5176
Standard
6993
46M1038
44T1481
3964
44T1471
Standard
3571
43W4298
Standard
5864
44E8840
Standard
7553
44X0104
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
Page 11 of 29
Quantity
Part Number
(IBM Reseller,
Worldwide)
Part Number
(IBM Direct,
US/CAN/LA)
Part Number
(IBM Direct,
EMEA/AP)
Description
42D0632
5537
42D0634
Standard
4162
44W3252
46M1075
2100
44X0147
Standard
5086
44X0138
Standard
3734
46M1131
46C7526
5080
43V6923
41Y8260
9298
41Y8273
7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U.
See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Single Quad-Core E5504 2.00-GHz Processor and 300-GB Hard
Drives
The IBM x3650-M2 is a robust server solution designed for Cisco Unity and Cisco Unity Connection messaging
products. No specific memory configuration is required as long as 4 GB of memory is provided. Table 16 lists the
components that must be configured and will ship when you order this system. Note that additional parts are
required but are not listed. These parts will automatically be configured and may also vary by country (power
cords, documentation, etc.).
Table 16.
Hardware for IBM x3650-M2 with Intel Quad-Core 5504 2.00-GHz Processor and 300-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
7947-22Y
7947-AC1
7947-CTO
Standard
5653
44E5176
Standard
6990
46M1035
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part Number
(IBM Direct,
EMEA/AP)
**
Description
44T1481
3964
44T1471
43W4296
3571
43W4298
44E8826
5864
44E8840
Standard
7553
44X0104
42D0637
5599
42D0639
Standard
4162
44W3252
46M1075
2100
44X0147
Standard
5086
44X0138
Standard
3734
46M1131
46C7526
5080
43V6923
41Y8260
9298
41Y8273
7947-22Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-22Y is 7947-22U.
See the product specific Official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for A.P. Geographies follow the same pattern - substitute the last character with the country-specific designator.
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 29
**
This is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will automatically
be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650-M2 Server with Dual Xeon Nehalem Quad-Core E5540 2.53-GHz Processors and
300-GB Hard Drives
The IBM x3650-M2 is a robust server solution designed only for Cisco Unified Contact Center and Cisco Unity and
Cisco Unity Connection messaging products. The required processors are dual Intel Xeon Nehalem quad-core
E5540 2.53-GHz processors. No specific memory configuration is required as long as 8 GB of memory is provided
(note that some product versions may require more memory). Table 17 lists the components that must be
configured and will ship when you order this system. Note that additional parts are required but are not listed.
These parts will automatically be configured and may also vary by country (power cords, documentation, etc.).
Table 17.
Hardware for IBM x3650-M2 with Intel Dual Quad-Core 5540 2.53-GHz Processor and 300-GB Hard Drives
Quantity
Part Number
(IBM Reseller,
Worldwide)
7947-62Y
7947-AC1
7947-CTO
Standard
5653
44E5176
Standard
6993
46M1038
46M1084
7752
46M1042
Addl Intel Xeon Proc E5540 4C (2.53GHz 8MB L3 Cache 1066MHz 80w)
44T1481
3964
44T1471
Standard
3571
43W4298
Standard
5864
44E8840
Standard
7553
44X0104
42D0637
5599
42D0639
Standard
4162
44W3252
46M1075
2100
44X0147
Standard
5086
44X0138
Standard
3734
46M1131
46C7526
5080
43V6923
41Y8260
9298
41Y8273
***
Part Number
(IBM Direct,
US/CAN/LA)
**
Part
Number0020
(IBM Direct,
EMEA/AP)
**
Description
7947-62Y is a worldwide GAV model number that is not orderable as listed and needs to be modified by country. The U.S. GAV
model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for 7947-62Y is 7947-62U.
See the product-specific official IBM announcement letter for other country-specific GAV model numbers. GAV-to-MTM mapping
for Asia Pacific geographies follow the same pattern - substitute the last character with the country-specific designator.
**
This model is an IBM build-to-order model. Additional parts are required but are not listed in the table. These parts will
automatically be configured and may also vary by country (power cords and documentation).
***
Recommended to remove the standard single-rank memory.
IBM x3650 with Single Intel 5140 2.33-GHz Processor and 146-GB Hard Drives
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB
of memory is provided (note that some product versions may require more memory).
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 29
Note that IBM has discontinued sale of this configuration. Table 18 is only for reference to help you identify which
configuration you have deployed.
Table 18.
Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor and 146-GB Hard Drives
Quantity
Description
7979-AC1
7979-CTO
1325
41Y8981
2 or 4
0542
39M5783
1670
25R8077
5534
43X0826
4144
32R2784
1968
40K0029
4334
40K0028
1606
39R9504
**
Quantity 2 required for Cisco Unified Communications Manager models MCS-7835-I2-IPC2, MCS-7835-I2-CMA2, MCS 7835 I2
CMB1, MCS-7835-I2-CMB2, and MCS-7835-I2-CMC1 as well as Cisco Contact Center models MCS-7835-I2-CCX2 and MCS
7835-I2-CCE2
**
Quantity 4 required for Cisco Unity Connection models MCS 7835I2-K9-UCA1A and MCS 7835I2-K9-UCB1
IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives
The IBM x3650 dual-processor configured server is a robust server solution designed for Cisco Unified
Communications Software applications. When configured properly for Cisco Unified Communications Manager, up
to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory
configuration is required as long as 4 GB of memory is provided (note that some product versions may require
more memory).
Note that IBM has discontinued sale of this configuration. Table 19 is only for reference to help you identify which
configuration you have deployed.
Table 19.
Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors and 146-GB Hard Drives
Quantity
Description
7979-AC1
7979-CTO
1325
41Y8981
1383
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
0542
39M5783
1670
25R8077
5534
43X0826
4144
32R2784
1968
40K0029
4334
40K0028
1606
39R9504
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 29
IBM x3650 Dual Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
The IBM x3650 dual-processor quad-core configured server is a robust server solution designed for Cisco Unity
and Cisco Unified Contact Center applications. The required processors are dual Intel Xeon Quad-Core 5345
2.33-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided (note
that some product versions may require more memory).
Note that IBM has discontinued sale of this configuration. Tables 20 and 21 are only for reference to help you
identify which configuration you have deployed.
Table 20.
Hardware Variation 1 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
(Equivalent of Cisco MCS7845-I2-ECS3 and MCS-7845-I2-CCE3)
Quantity
7979-AC1
7979-CTO
2816
43W5827
3457
43W5819
0542
39M5783
1670
25R8077
5534
43X0826
4144
32R2784
1968
40K0029
4334
40K0028
1606
39R9504
Description
This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
146-GB hot-swap single-attachment-station (SAS) drives, and all the other components itemized in Table 20. Note: Additional
parts are required but are not listed in the table. These parts will automatically be configured and may also vary by country
(power cords, documentation, etc.).
Table 21.
Hardware Variation 2 for Dual IBM x3650 Quad-Core Intel E5345 2.33-GHz Processors with 146-GB Hard Drives
(Equivalent of Cisco MCS7845-I2-ECS4 and MCS-7845-I2-CCE4)
Quantity
7979-AC1
7979-CTO
2816
43W5827
3457
43W5819
0542
39M5783
1670
25R8077
5534
43X0826
4144
32R2784
1968
40K0029
4334
40K0028
1606
39R9504
Description
This IBM build-to-order model must be configured with two Intel E5345 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, eight
146-GB hot-swap SAS drives, and all the other components itemized in Table 21. Note: Additional parts are required but are not
listed in Table 21. These parts will automatically be configured and may also vary by country (power cords, documentation).
You can add additional memory to the x3650 systems using the following parts:
46C7418: 2GB (2x1GB) Single Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
46C7419: 4GB (2x2GB) Dual Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 29
46C7420: 8GB (2x4GB) Quad Rank PC2-5300 CL5 ECC FBD 667MHz Low Power Memory
Hardware for IBM x3250 M2 with Intel Xeon E3110 3.0-GHz Processor
Quantity
4190-AC1 or
4194-AC1
4190-CTO or
4194-CTO
3650
44R5766
2749
44X1885
Refresh 1 Base
3961
46C7424
2773
43V7424
5292
39M4509
9011
32P8874
4911
44T2004
4162
44W3252
Description
The 4190 machine time carries a 1-year limited parts and labor warranty. The 4194 machine type carries a 3-year limited parts
and labor warranty.
IBM x3650 Single Intel 5140 2.33-GHz Processor with 73-GB Hard Drives
This server configuration is identical to the IBM x3650 server with a single Intel 5140 2.33-GHz processor and 146GB hard drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP
Telephony OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS
7835-I2.
Note that IBM has discontinued sale of this configuration. Table 23 is only for reference to help you identify which
configuration you have deployed.
Table 23.
Hardware for IBM x3650 with Intel 5140 2.33-GHz Processor with 73-GB Hard Drives
Quantity
7979-AC1
7979-CTO
1325
41Y8981
0542
39M5783
1670
25R8077
5159
40K1084
4144
32R2784
1968
40K0029
4334
40K0028
Description
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 29
1606
39R9504
This IBM build-to-order model must be configured with the Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 23. Note: Additional parts are required but are not
listed in Table 23. These parts will automatically be configured and may also vary by country (power cords and documentation).
IBM x3650 with Dual Intel 5140 2.33-GHz Processors with 73-GB Hard Drives
This server configuration is identical to the IBM x3650 with dual Intel 5140 2.33-GHz processors with 146-GB hard
drives, except that this configuration uses 73-GB hard drives and supports different versions of the IP Telephony
OS and Cisco Unified Communications Manager. It is the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Table 24 is only for reference to help you identify which
configuration you have deployed.
Table 24.
Hardware for IBM x3650 with Dual Intel 5140 2.33-GHz Processors
Quantity
7979-AC1
7979-CTO
1325
41Y8981
1383
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
0542
39M5783
1670
25R8077
5159
40K1084
4144
32R2784
1968
40K0029
4334
40K0028
1606
39R9504
Description
This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 24. Note: Additional parts are required but are not
listed in Table 24. These parts will automatically be configured and may also vary by country (power cords and documentation).
Hardware for IBM xSeries 306 with Intel Pentium 4 Xeon 3.06-GHz Processor
Quantity
Description
8836-2SU
06P4054
22P7047
73P8002
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 29
Hardware for IBM xSeries 306 with Intel Pentium 3.4-GHz Processor
Quantity
Description
8836-2SU
06P4054
22P7047
73P8002
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8836-5SY is 8836-5SU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers.
GAV-to-MTM mapping for Latin America and Asia Pacific geographies: 1Mx > 11X, 1Sx > 15X, 2Mx > 21X, 2Sx > 25X, 4MY >
41X, 4SY > 45X, 5MY > 51X, and 5SY > 55X. Latin America and Asia Pacific models 4xX and 5xY will need the last digit (X)
substituted with a country-specific designator. For example, model 31X may become 31L. Please note that Asia Pacific and Latin
America models of the 8836-5SY are not supported on OS 2000.4.1b. For those countries, use the x306 3.06-GHz 8836-2SY
model listed and OS 2000.2.7.
Hardware for IBM xSeries 306m with Intel Pentium D 2.8-GHz Processor
Quantity
Description
8849-G2Y or 8491-G2Y*
x306m, Intel PD 2.8GHz/800MHz, 2 x 2MB Layer 2, 2x 512MB, O/Bay SS S-ATA, 24x-10x, 350W p/s,
Rack
30R5148
39Y6824
39M4500
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8849-G2Y is 8849-G2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 29
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last
character with the country-specific designator.
Hardware for IBM xSeries 306m with Intel 950 3.4-GHz Processor
Quantity
Description
8849-K2Y or
8491-K2Y* or
**
8849-AC1 or
**
8491-AC1
Express x306m, Intel PD 950, 3.4GHz/800MHz, 4MB Layer 2, 2 x 512MB, O/Bay SS S-ATA, 24x-10x,
350W p/s, Rack
30R5148
39Y6824
39M4500
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8849-K2Y is 8849-K2U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific geographies follow the same pattern. Substitute the last
character with the country-specific designator.
**
This IBM build-to-order model must be configured with an Intel 950 3.4-GHz processor, 2-GB RAM, two 80-GB simple-swap
Serial ATA (SATA) drives, and IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive. Use of this model requires an IBM
technician to reset the MTM to 8849-K2Y if Cisco Unified Communications Manager 5.1 is being installed. The 8849 machine
type carries a 1-year limited parts and labor warranty. The 8491 machine type carries a 3-year limited parts and labor warranty.
Non-Country-Specific Hardware for IBM x3250 with Intel 3050 Xeon 2.13-GHz Processor*
IBM Type-Model Feature
**
4364-AC1 or 4365-AC1
Description
IBM System x3250
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 19 of 29
Quantity
Description
0992
1128
1272
1903
2007
BIOS GBM
2046
Front Bezel
2088
2091
2268
Base Hardware
4144
4256
4367
5291
9011
This table lists common hardware for the supported server model and does not include power cables and country-specific
items. The IBM build-to-order tool should automatically include the required country-specific parts for the order. This model must
be configured with an Intel Dual-Core 3050 Xeon 2.13-GHz processor, 2-GB RAM, two 160-GB simple-swap SATA drives, and
an IBM CD-RW/DVD-ROM Combo Ultrabay Enhanced Drive.
**
The 4364 machine time carries a 1-year limited parts and labor warranty. The 4365 machine type carries a 3-year limited parts
and labor warranty.
Hardware for IBM xSeries 330 with Intel Pentium III 800-MHz Processor
Quantity
Description
865451Y
37L7205
10K0020
06P4792
Other supported processors are listed as follows. Replace part number 865451Y with one of the following.
1
865411Y
865431Y
865441Y
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 29
Note that IBM has discontinued sale of this configuration. Table 31 is only for reference to help you identify which
configuration you have deployed.
Table 31.
Hardware for IBM xSeries 330 with Intel Pentium III 1.2-GHz Processor
Quantity
Description
867431X
10K0020
256MB DIMM
06P5754
06P4792
Hardware for IBM xSeries 340 with Intel Pentium III 1-GHz Processor
Quantity
Description
86566RY
37L7205
10K0018
10K0020
10K0022
06P5740
37L6880
00N7991
86566RY
Hardware for IBM xSeries 342 with Intel Pentium III 1.26-GHz Processor
Quantity
Description
86694RX
33L3324
512MB DIMM
06P5754
06P5740
ServeRAID 4Lx
37L6880
00N7991
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 21 of 29
10K2340
Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 2.4-GHz Processor
Quantity
Description
867031X
33L5037
256MB DIMM
25P3492
06P5755
22P7047
59P4057
Hardware for IBM xSeries 345 with Intel Pentium 4 Xeon 3.06-GHz Processor
Quantity
Description
867071X or 8670M1X
33L5037
256MB DIMM
25P3492 or 13N2190
32P0726
22P7047
74P4965
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 22 of 29
required processor is an Intel Pentium Xeon 3.4-GHz processor. No specific memory configuration is required as
long as 2 GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 36 is only for reference to help you identify which
configuration you have deployed.
Table 36.
Quantity
Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
IBM Part Number
*
Description
8840-31Y
IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, rack
73P3522
71P8642
90P1319 or
90P1381
26K5097
(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
Hardware for IBM xSeries 346 with Intel Pentium Xeon 3.4-GHz Processor
IBM Part Number
*
Description
8840-3RY or
**
8840-AC1
IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay U320 SCSI, 625W p/s, Rack
39M5818
39R8800
40K1027
40K1915
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
**
This IBM build-to-order model must be configured with an Intel Xeon 3.4-GHz or 2-MB Layer 2 processor, 2-GB RAM,
ServeRAID 7k, two 73-GB 15k hot-swap Small Computer System Interface (SCSI) drives, and a redundant power supply.
Page 23 of 29
Cisco CallManager 3.3 or later and any version of Cisco Unified Communications Manager. The required
processors are dual Intel Xeon 3.06-GHz processors. No specific memory configuration is required as long as 4
GB of memory is provided.
Note that IBM has discontinued sale of this configuration. Table 38 is only for reference to help you identify which
configuration you have deployed.
Table 38.
Hardware for IBM xSeries 345 with Dual Intel Xeon 3.06-GHz Processors
Quantity
Description
8670M1X
02R1988
33L5039
13N2190
32P0727
22P7047
74P4965
Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
IBM Part Number
*
Description
8840-31Y
IBM x346, Xeon 3.4GHz/800MHz, 1MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, Rack
13N0684
73P3522
71P8642
90P1319 or
90P1381
26K5097
(26K5098 is the Worldwide Part Number, Which Ships without a Line Cord)
*
Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-31Y is 8840-31U. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
Page 24 of 29
Cisco CallManager 3.3 or later or any version of Cisco Unified Communications Manager. The required
processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB
of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-I1.
Note that IBM has discontinued sale of this configuration. Table 40 is only for reference to help you identify which
configuration you have deployed.
Table 40.
Hardware for IBM xSeries 346 with Dual Intel Xeon 3.4-GHz Processors
Quantity
Description
8840-3RY* or 8840-AC1**
IBM x346, Xeon 3.4GHz/800MHz, 2MB Layer 2, 2 x 512MB, O/Bay HS U320 SCSI, 625W p/s, rack
40K2506
39M5818
39M5809
39R8800
40K1027
40K1915
* Model numbers provided are worldwide GAV model numbers that are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
8840-3RY is 8840-3RU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator.
** This IBM build-to-order model must be configured with two Intel Xeon 3.4-GHz or 2-MB Layer 2 processors, 4-GB RAM,
ServeRAID 7k, four 73-GB 15k hot-swap SCSI drives, and a redundant power supply.
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
Quantity
7979-5AY or 7979-AC1
Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in
HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s
39M5782
25R8064
40K1052
Description
**
40K1905
40K1908
39Y9566
* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 25 of 29
7979-5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of
40K1905.
** This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 41.
IBM x3650 with Intel Xeon 5140 2.33-GHz Processor (Special Order)
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0.
The IBM x3650 is a robust server solution designed for Cisco Unified Communications Software applications. As
many as 2,500 Cisco Unified IP Phones can be supported by a single x3650 server running Cisco Unified
Communications Manager. When clustered properly, as many as 10,000 users can be supported. The required
processor is an Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server is the configuration equivalent of the Cisco 7835-I2.
Note that IBM has discontinued sale of this configuration. Tables 42 and 43 are only for reference to help you
identify which configuration you have deployed.
Use Table 42 for systems ordered within North America and Table 43 for systems ordered outside of North
America.
Table 42.
Quantity
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
IBM Part Number
*
Description
7979-AC1
1325
0542
1670
5159
4144
1968
4334
1606
This IBM build-to-order model must be configured with Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73-GB
hot-swap SAS drives, and all the other components itemized in Table 42. Note: Additional parts are required but are not listed in
Table 42. These parts will automatically be configured and may also vary by country (power cords and documentation).
Table 43.
Quantity
Hardware for IBM x3650 with Intel Xeon 5140 2.33-GHz Processor
IBM Part Number
*
Description
7979-CTO
41Y8981
39M5783
25R8077
40K1084
32R2784
40K0029
40K0028
39R9504
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 26 of 29
* This IBM build-to-order model must be configured with an Intel 5140 2.33-GHz processor, 2-GB RAM, ServeRAID 8k, two 73GB hot-swap SAS drives, and all the other components itemized in Table 43. Note: Additional parts are required but are not
listed in Table 43. These parts will automatically be configured and may also vary by country (power cords and documentation).
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
IBM Part Number
*
Description
**
7979-5AY or 7979-AC1
Express x3650, Dual-Core Intel Xeon 5140 2.33GHz/1333MHz, 2x2MB, 2X512MB Chipkill, O/Bay 2.5in
HS SAS, SR-8k-1, CD-RW/DVD, 835W p/s
40K1234
39M5782
39M5785
25R8064
40K1052
40K1905
40K1908
39Y9566
* Model numbers provided are worldwide GAV model numbers, which are not orderable as listed and need to be modified by
country. The U.S. GAV model numbers use the following nomenclature: xxU. For example, the U.S. orderable part number for
7979-5AY is 7979-5AU. Refer to the product-specific official IBM announcement letter for other country-specific GAV model
numbers. GAV-to-MTM mapping for Latin America and Asia Pacific regions follow the same pattern. Substitute the last character
with the country-specific designator. For countries using a worldwide power supply, use IBM part number 40K1906 instead of
40K1905.
** This IBM build-to-order model must be configured with two Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 44.
IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors (Special Order)
This processor requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1. This
server is not supported in Cisco Unified Communications Manager 5.0. The IBM x3650 dual-processor configured
server is a robust server solution designed for Cisco Unified Communications Software applications. As many as
7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager 3.3 or later or any
version of Cisco Unified Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz
processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is
the configuration equivalent of the Cisco MCS 7845-I2.
Note that IBM has discontinued sale of this configuration. Tables 45 and 46 are only for reference to help you
identify which configuration you have deployed.
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 27 of 29
Use Table 45 for systems ordered within North America and Table 46 for systems ordered outside of North
America.
Table 45.
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
Quantity
7979-AC1
1325
1383
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
0542
1670
5159
4144
1968
4334
1606
Description
* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 45. Note: Additional parts are required but are not
listed in Table 45. These parts will automatically be configured and may also vary by country (power cords and documentation).
Table 46.
Hardware for IBM x3650 with Dual Intel Xeon 5140 2.33-GHz Processors
Quantity
7979-CTO
41Y8981
41Y4266
Additional Dual Core Intel Xeon Proc 5140 (2.33GHz 2x2MB L2 Cache)
39M5783
25R8077
40K1084
32R2784
40K0029
40K0028
39R9504
Description
* This IBM build-to-order model must be configured with dual Intel 5140 2.33-GHz processors, 4-GB RAM, ServeRAID 8k, four
73-GB hot-swap SAS drives, and all the other components itemized in Table 46. Note: Additional parts are required but are not
listed in Table 46. These parts will automatically be configured and may also vary by country (power cords and documentation).
HP Tape Drives
Cisco supports certain models of USB-attached DAT tape drives for software backups to a local tape instead of to
a network location. These tapes drives are supported with select models of Cisco MCS 7800 Series Media
Convergence Servers. These tape drives were formerly sold as Cisco part numbers DAT-USB-RM-72 and DATUSB-EXT-72.
Ordering instructions from HP: Please order from HP the part numbers of one of the supported models in Table
47. These part numbers are orderable through HP or HP authorized resellers in all regions. For media for these
DAT drives, please consult: http://h18004.www1.hp.com/products/quickspecs/11843_div/11843_div.HTML.
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 28 of 29
Table 47.
HP Part Number
Description
A8007A
Printed in USA
2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C11-331705-22
08/12
Page 29 of 29