Documente Academic
Documente Profesional
Documente Cultură
Bottle
Type
Holding
Time
Test
Parameter
Description
BOD
2 days
COD
28 days
cBOD
2 days
TC & FC
(MPN)
30 hrs
TC/FC &E.coli
(MPN)
Microbiological analysis for total coliform, fecal coliform and E.coli by multiple
tube fermentation MPN
30 hrs
28 days
TSS
7 days
Unionized
ammoniafield
The unionized ammonia is calculated using the ammonia result and field pH and temperature.
48 hrs
Unionized
ammoniaWSER
Samples are placed in a 15 deg C fridge for 24 hours and the pH then taken. The pH is used to
calculate the unionized ammonia from the ammonia result. WSER requires that the unionized
ammonia result be standardized to 15 degrees C.
48hrs
P-Total
28 days
TKN
28 days
NO3/NO2-N
2 days
Total N
A,B
48 hrs
pH
pH
0.25 hr
Trout P/F
Acute Lethality Bioassay of water samples using trout and analyzed as a pass /fail
5 days
Conductivity
Conductivity
28 days
If emergency TAT is required e.g., in the case of an emergency discharge, the ability to report is controlled by the time
required to complete sample preparation and analysis. There are certain steps that prevent next day reporting: for BOD,
cBOD, total coliform, fecal coliform & E.Coli by MPN there is a five day incubation, for trout bioassay there is a 96 hour
exposure time, and for total phosphorous and total kjeldahl nitrogen there is a one day digestion prior to analysis. There is a
100% surcharge for any work that requires emergency TATs. When samples are submitted for Emergency TATs the Laboratory
completes the analysis as quickly as possible. Please call the Laboratory when work will be submitted for emergency TATs.
Hold time is the maximum time samples should be held prior to being analyzed. Hold times are calculated using the time
sampled on the submission form to the time the analysis begins. To help the lab meet hold times, please submit samples
within 24 hours of sampling. In order to ensure hold time for BOD analysis is met, please do not sample on a Monday to
submit on a Tuesday, as this analysis is not started on Tuesday.
Please ensure that a completed submission form is included with the samples. The email address of the Environmental
Officer should be added if you want automatic reporting to the Province.
Contact the Laboratory for a price quote, bottles, and sampling information. Our phone number is 204 255-9720, toll free
1 800 607-7555, or by email ALSWPInfo@alsglobal.com
Bottles