Documente Academic
Documente Profesional
Documente Cultură
Installation guide
Thank you for Downloading your free 30-day trial version of the MasterSeries. While your software
downloads, please read through this document
This document gives you Guidance on
1.
2.
3.
4.
5.
6.
Installation
Authorising your Trial
Demonstration Videos
Restrictions
Updating the Software
Trouble Shooting
This document is a PDF file. We recommend you print or save a copy locally.
Enjoy, MasterSeries
Civil & Structural Computer Services Ltd. 1 Circular Road, Newtownabbey, Co. Antrim, BT37 0RA, United Kingdom
free@masterseries.com, +44 (0) 28 9036 5950, http://www.masterseries.com, Registration No. NI 19163, VAT No. 422 2750 83
1. INSTALLATION
Installation is very straight forward with all the default settings being the normal values.
The installation may install several additional drivers such as the C++, SQL, BREVE,
.Net Framework and Direct X runtime files. These are all automatically configured
with simple Yes, Next or Continue responses accepting the terms.
3. DEMONSTRATION VIDEOS
Introduction to MasterSeries PowerPoint Presentation
PowerPad & PowerPad Plus
MasterFrame overview
MasterFrame, New Features
Building Designer Suite Modeling 2015
3D Model Manager Training
Portal Frame Analysis & Design
MasterKey Steel Frame Design
MasterBeam Composite Design
MasterKey Concrete Design
MasterKey: Moment & Simple Connections
MasterKey Retaining Walls
MasterKey: Masonry Design
MasterBeam: Steel, Concrete & Timber Beam Designers
Free Steel Beam Designer Webinar
Some of the features in the videos marked are included in PowerPad. Please refer to the price list, for
features & limits.
More Videos at https://www.youtube.com/user/MasterSeriesSoftware
4. RESTRICTIONS
There are 2 trial versions
30 Day Trial Version
This is the mode you enter when you successfully authorise the trial.
There are only a few differences between this and the purchased
software.
1) This evaluation version should not be used on commercial
jobs.
2) Should not be used to benchmark other software.
3) For Evaluation Use Only statements on screen and all
output. These cannot be removed.
You also you get a fully functioning Single Span Steel Beam
Designer.
5. UPDATING
Should you wish to update your version of the MasterSeries to the very latest version then you can
do so using the following link.
www.masterseries.com/public/DemoVersion/MasterSeries_Update_Eval.exe
Just run the file to install it over the top of your current MasterSeries. Just make sure you are not
running the MasterSeries when you run the update file.
6. TROUBLE SHOOTING
Download did not Start
The download is configured to start your download, and then 10 seconds later display this page.
However some PCs switch too quickly and the download is cancled. If this happens then you can
download the software directly from one of the 2 links below.
64Bit www.masterseries.com/public/DemoVersion/x64_MasterSeries_Setup_Eval.exe
or
32Bit www.masterseries.com/public/DemoVersion/x86_MasterSeries_Setup_Eval.exe
Software didnt install
The software will require administration rights during installation and this will usually be
automatically granted by the installer program.
If it fails to install then retry using a right mouse click on the installation file and select to Run
as Administrator.
3)
4)
5)
6)
7)
8)
(If the Sentinel Admin Control Center fails to load, then contact
free@masterseries.com)
Select Update/Attach from the left Options menu
Select Choose file
Browse to C:\ProgramData\MasterSeries
Select ms2015-30.v2c and select Open
Select Apply File
You get a message Your update was applied successfully
Shortcut: Browse to Program Files, click on right of the url lino. You can
then edit the url replacing Program files with ProgramData.